Merge branch 'u300' into devel

14 files changed, 1053 insertions, 69 deletions

diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 337b9aabce49..801b21e7f677 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -81,6 +81,18 @@ config MACH_U300_SEMI_IS_SHARED
 		Memory Interface) from both from access and application
 		side.
 
+config MACH_U300_SPIDUMMY
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
 comment "All the settings below must match the bootloader's settings"
 
 config MACH_U300_ACCESS_MEM_SIZE
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 24950e0df4b4..885b5c027c1e 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -9,3 +9,6 @@ obj-		:=
 
 obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
+obj-$(CONFIG_SPI_PL022)           += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 2e9b8ccd8ec2..be60d6deee8b 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -32,6 +32,8 @@
 
 #include "clock.h"
 #include "mmc.h"
+#include "spi.h"
+#include "i2c.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -378,14 +380,14 @@ static struct platform_device wdog_device = {
 };
 
 static struct platform_device i2c0_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };
 
 static struct platform_device i2c1_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
@@ -611,6 +613,8 @@ void __init u300_init_devices(void)
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+	/* Initialize SPI device with some board specifics */
+	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
@@ -622,6 +626,12 @@ void __init u300_init_devices(void)
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the I2C buses */
+	u300_i2c_register_board_devices();
+
+	/* Register subdevices on the SPI bus */
+	u300_spi_register_board_devices();
+
 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 000000000000..962f9de454de
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	struct pl022_config_chip *chip_info = spi->controller_data;
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 3: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 9: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+	return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+	spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 308cdb197a92..63c8f27fb15a 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -25,11 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
 /* Reference to GPIO block clock */
 static struct clk *clk;
 
@@ -606,14 +601,6 @@ static int __init gpio_probe(struct platform_device *pdev)
 	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
 #endif
 
-	/* Set up some padmuxing here */
-#ifdef CONFIG_MMC
-	pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
-	pmx_set_mission_mode_spi();
-#endif
-
 	gpio_set_initial_values();
 
 	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
new file mode 100644
index 000000000000..10be1f888b27
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+	{
+		.type = "ab3100",
+		.addr = 0x48,
+		.irq = IRQ_U300_IRQ0_EXT,
+	},
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.type = "fwcam",
+		.addr = 0x10,
+	},
+	{
+		.type = "fwcam",
+		.addr = 0x5d,
+	},
+#else
+	{ },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+	i2c_register_board_info(0, bus0_i2c_board_info,
+				ARRAY_SIZE(bus0_i2c_board_info));
+	i2c_register_board_info(1, bus1_i2c_board_info,
+				ARRAY_SIZE(bus1_i2c_board_info));
+}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
new file mode 100644
index 000000000000..485c02e5c06d
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 1c90d1b1ccb6..7444f5c7da97 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -240,8 +240,13 @@
 #define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
 #define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
 #define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO			(0xC000)
+#elif CONFIG_MACH_U300_BS365
 #define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
 #define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#endif
 #define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
 #define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
 #define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
@@ -345,19 +350,69 @@
 #define U300_SYSCON_MMCR_MASK					(0x0003)
 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR					(0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R					(0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM			(0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC			(0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM			(0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC			(0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM			(0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC			(0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM			(0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC			(0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK			(0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM			(0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC			(0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO			(0xC000)
 /* TODO: More SYSCON registers missing */
 #define U300_SYSCON_PMC3R					(0x10c)
 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R					(0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK			(0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA			(0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2			(0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA			(0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2			(0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK			(0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13		(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS		(0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N	(0x0200)
 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 #define U300_SYSCON_S0CCR					(0x120)
 #define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -375,6 +430,7 @@
 #define U300_SYSCON_S1CCR					(0x124)
 #define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -393,6 +449,7 @@
 #define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
 #define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
 #define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -425,6 +482,44 @@
 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR					(0x013C)
+#define U300_SYSCON_CICR_MASK					(0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
 /* Clock activity observability register 0 */
 #define U300_SYSCON_C0OAR					(0x140)
 #define U300_SYSCON_C0OAR_MASK					(0xFFFF)
@@ -513,7 +608,7 @@
 /**
  * CPU medium frequency in MHz
  */
-#define SYSCON_CPU_CLOCK_MEDIUM  104
+#define SYSCON_CPU_CLOCK_MEDIUM   52
 /**
  * CPU low frequency in MHz
  */
@@ -527,7 +622,7 @@
 /**
  * EMIF medium frequency in MHz
  */
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM  52
 /**
  * EMIF low frequency in MHz
  */
@@ -541,7 +636,7 @@
 /**
  * AHB medium frequency in MHz
  */
-#define SYSCON_AHB_CLOCK_MEDIUM   52
+#define SYSCON_AHB_CLOCK_MEDIUM   26
 /**
  * AHB low frequency in MHz
  */
@@ -553,6 +648,15 @@ enum syscon_busmaster {
   SYSCON_BM_VIDEO_ENC
 };
 
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+  SYSCON_PU_KEY_IN_EN,
+  SYSCON_PU_EMIF_1_8_BIT_EN,
+  SYSCON_PU_EMIF_1_16_BIT_EN,
+  SYSCON_PU_EMIF_1_NFIF_READY_EN,
+  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
 /*
  * Note that this array must match the order of the array "clk_reg"
  * in syscon.c
@@ -575,6 +679,7 @@ enum syscon_clk {
   SYSCON_CLKCONTROL_SPI,
   SYSCON_CLKCONTROL_I2S0_CORE,
   SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_UART1,
   SYSCON_CLKCONTROL_AAIF,
   SYSCON_CLKCONTROL_AHB,
   SYSCON_CLKCONTROL_APEX,
@@ -604,7 +709,8 @@ enum syscon_sysclk_mode {
 
 enum syscon_sysclk_req {
   SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW
+  SYSCON_SYSCLKREQ_ACTIVE_LOW,
+  SYSCON_SYSCLKREQ_MONITOR
 };
 
 enum syscon_clk_mode {
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 089b9957b6a4..82af247760e6 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach/mmc.h>
 #include "mmc.h"
+#include "padmux.h"
 
 struct mmci_card_event {
 	struct input_dev *mmc_input;
@@ -146,6 +147,7 @@ int __devinit mmc_init(struct amba_device *adev)
 {
 	struct mmci_card_event *mmci_card;
 	struct device *mmcsd_device = &adev->dev;
+	struct pmx *pmx;
 	int ret = 0;
 
 	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
@@ -209,6 +211,20 @@ int __devinit mmc_init(struct amba_device *adev)
 
 	input_set_drvdata(mmci_card->mmc_input, mmci_card);
 
+	/*
+	 * Setup padmuxing for MMC. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+	if (IS_ERR(pmx))
+		pr_warning("Could not get padmux handle\n");
+	else {
+		ret = pmx_activate(mmcsd_device, pmx);
+		if (IS_ERR_VALUE(ret))
+			pr_warning("Could not activate padmuxing\n");
+	}
+
 	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
 				     mmci_card);
 
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
index f3664564f086..4c93c6cefd37 100644
--- a/arch/arm/mach-u300/padmux.c
+++ b/arch/arm/mach-u300/padmux.c
@@ -6,53 +6,362 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <mach/u300-regs.h>
 #include <mach/syscon.h>
-
 #include "padmux.h"
 
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
-	u16 val;
-
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-}
-
-void pmx_set_mission_mode_spi(void)
-{
-	u16 val;
-
-	/* Set up padmuxing so the SPI port and its chipselects are active */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	/*
-	 * Activate the SPI port (disable the use of these pins for generic
-	 * GPIO, DSP, AAIF
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
-	/*
-	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
-	/*
-	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+static DEFINE_MUTEX(pmx_mutex);
+
+const u32 pmx_registers[] = {
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ *   {"PMC1LR" mask, "PMC1LR" value},
+ *   {"PMC1HR" mask, "PMC1HR" value},
+ *   {"PMC2R"  mask, "PMC2R"  value},
+ *   {"PMC3R"  mask, "PMC3R"  value},
+ *   {"PMC4R"  mask, "PMC4R"  value}
+ * }
+ */
+static struct pmx mmc_setting = {
+	.setting = U300_APP_PMX_MMC_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "MMC",
+	.onmask = {
+		   {U300_SYSCON_PMC1LR_MMCSD_MASK,
+		    U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0},
+		   {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+		    U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+		   },
+};
+
+static struct pmx spi_setting = {
+	.setting = U300_APP_PMX_SPI_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "SPI",
+	.onmask = {{0, 0},
+		   {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+		    U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0}
+		   },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+	&mmc_setting,
+	&spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+	u16 regval, val, mask;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+		if (activate)
+			val = pmx->onmask[i].val;
+		else
+			val = 0;
+
+		mask = pmx->onmask[i].mask;
+		if (mask != 0) {
+			regval = readw(pmx_registers[i]);
+			regval &= ~mask;
+			regval |= val;
+			writew(regval, pmx_registers[i]);
+		}
+	}
+}
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
+{
+	int i;
+	struct pmx *pmx = ERR_PTR(-ENOENT);
+
+	if (dev == NULL)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (setting == pmx_settings[i]->setting) {
+
+			if (pmx_settings[i]->dev != NULL) {
+				WARN(1, "padmux: required setting "
+				     "in use by another consumer\n");
+			} else {
+				pmx = pmx_settings[i];
+				pmx->dev = dev;
+				dev_dbg(dev, "padmux: setting nr %d is now "
+					"bound to %s and ready to use\n",
+					setting, dev_name(dev));
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return pmx;
+}
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot release handle as "
+					"it is bound to another consumer\n");
+				ret = -EINVAL;
+				break;
+			} else {
+				pmx_settings[i]->dev = NULL;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+	int i, j, ret;
+	ret = 0;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+
+	/* Make sure the required bits are not used */
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			if (pmx_settings[i]->onmask[j].mask & pmx->
+				onmask[j].mask) {
+				/* More than one entry on the same bits */
+				WARN(1, "padmux: cannot activate "
+					"setting. Bit conflict with "
+					"an active setting\n");
+
+				ret = -EUSERS;
+				goto exit;
+			}
+		}
+	}
+	update_registers(pmx, true);
+	pmx->activated = true;
+	dev_dbg(dev, "padmux: setting nr %d is activated\n",
+		pmx->setting);
+
+exit:
+	mutex_unlock(&pmx_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL)
+			continue;
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot deactivate "
+				     "pmx setting as it was activated "
+				     "by another consumer\n");
+
+				ret = -EBUSY;
+				continue;
+			} else {
+				update_registers(pmx, false);
+				pmx_settings[i]->dev = NULL;
+				pmx->activated = false;
+				ret = 0;
+				dev_dbg(dev, "padmux: setting nr %d is deactivated",
+					pmx->setting);
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+	/* Used to identify several entries on the same bits */
+	u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+	int i, j;
+
+	memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (!pmx_settings[i]->default_on)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			/* Make sure there is only one entry on the same bits */
+			if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+				BUG();
+				return -EUSERS;
+			}
+			modbits[j] |= pmx_settings[i]->onmask[j].mask;
+		}
+		update_registers(pmx_settings[i], true);
+	}
+	return 0;
 }
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+	int i;
+	seq_printf(s, "-------------------------------------------------\n");
+	seq_printf(s, "SETTING     BOUND TO DEVICE               STATE\n");
+	seq_printf(s, "-------------------------------------------------\n");
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+		/* Format pmx and device name nicely */
+		char cdp[33];
+		int chars;
+
+		chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+		while (chars < 16) {
+			cdp[chars] = ' ';
+			chars++;
+		}
+		chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+				dev_name(pmx_settings[i]->dev) : "N/A");
+		while (chars < 16) {
+			cdp[chars+16] = ' ';
+			chars++;
+		}
+		cdp[32] = '\0';
+
+		seq_printf(s,
+			"%s\t%s\n",
+			&cdp[0],
+			pmx_settings[i]->activated ?
+			"ACTIVATED" : "DEACTIVATED"
+			);
+
+	}
+	mutex_unlock(&pmx_mutex);
+	return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+	.owner		= THIS_MODULE,
+	.open		= pmx_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+	/* Expose a simple debugfs interface to view pmx settings */
+	(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+				   NULL, NULL,
+				   &pmx_operations);
+	return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+	int ret;
+
+	ret = pmx_set_default();
+
+	if (IS_ERR_VALUE(ret))
+		pr_crit("padmux: default settings could not be set\n");
+
+	return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
index 8c2099ac5046..6e8b86064097 100644
--- a/arch/arm/mach-u300/padmux.h
+++ b/arch/arm/mach-u300/padmux.h
@@ -6,14 +6,34 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
 
 #ifndef __MACH_U300_PADMUX_H
 #define __MACH_U300_PADMUX_H
 
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+	U300_APP_PMX_MMC_SETTING,
+	U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+	u16 mask;		/* Mask bits */
+	u16 val;		/* Value when active */
+};
+
+struct pmx {
+	struct device *dev;
+	enum pmx_settings setting;
+	char *name;
+	bool activated;
+	bool default_on;
+	struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
 
 #endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
new file mode 100644
index 000000000000..f0e887bea30e
--- /dev/null
+++ b/arch/arm/mach-u300/spi.c
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+		 __func__,
+		 chipselect,
+		 chipselect ? "unselect chip" : "select chip");
+	/*
+	 * Here you would write the chip select value to the GPIO pins if
+	 * this was a real chip (but this is a loopback dummy).
+	 */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+	.lbm = LOOPBACK_ENABLED,
+	/*
+	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+	 * DMA_TRANSFER does not work
+	 */
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* We can only act as master but SSP_SLAVE is possible in theory */
+	.hierarchy = SSP_MASTER,
+	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+	.slave_tx_disable = 0,
+	/* LSB first */
+	.endian_tx = SSP_TX_LSB,
+	.endian_rx = SSP_RX_LSB,
+	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len = SSP_BITS_12,
+	.wait_state = SSP_MWIRE_WAIT_ZERO,
+	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	/*
+	 * This is where you insert a call to a function to enable CS
+	 * (usually GPIO) for a certain chip.
+	 */
+	.cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+	{
+		/* A dummy chip used for loopback tests */
+		.modalias       = "spi-dummy",
+		/* Really dummy, pass in additional chip config here */
+		.platform_data  = NULL,
+		/* This defines how the controller shall handle the device */
+		.controller_data = &dummy_chip_info,
+		/* .irq - no external IRQ routed from this device */
+		.max_speed_hz   = 1000000,
+		.bus_num        = 0, /* Only one bus on this chip */
+		.chip_select    = 0,
+		/* Means SPI_CS_HIGH, change if e.g low CS */
+		.mode           = 0,
+	},
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+	/* If you have several SPI buses this varies, we have only bus 0 */
+	.bus_id = 0,
+	/* Set this to 1 when we think we got DMA working */
+	.enable_dma = 0,
+	/*
+	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+	 * chip selects for SPI. (Same on U330, U335 and U365.)
+	 * TODO: make sure the GPIO driver can select these properly
+	 * and do padmuxing accordingly too.
+	 */
+	.num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+	struct pmx *pmx;
+
+	adev->dev.platform_data = &ssp_platform_data;
+	/*
+	 * Setup padmuxing for SPI. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+	if (IS_ERR(pmx))
+		dev_warn(&adev->dev, "Could not get padmux handle\n");
+	else {
+		int ret;
+
+		ret = pmx_activate(&adev->dev, pmx);
+		if (IS_ERR_VALUE(ret))
+			dev_warn(&adev->dev, "Could not activate padmuxing\n");
+	}
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+	/* Register any SPI devices */
+	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
new file mode 100644
index 000000000000..bd3d867e240f
--- /dev/null
+++ b/arch/arm/mach-u300/spi.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index cce53204880e..26d26f5100fe 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -346,6 +346,21 @@ static struct clocksource clocksource_u300_1mhz = {
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+				  &clocksource_u300_1mhz),
+				  clocksource_u300_1mhz.mult,
+				  clocksource_u300_1mhz.shift);
+}
+
 
 /*
  * This sets up the system timers, clock source and clock event.