Merge remote-tracking branch 'airlied/drm-fixes' into drm-intel-next-queued

Back-merge from drm-fixes into drm-intel-next to sort out two things:

- interlaced support: -fixes contains a bugfix to correctly clear
  interlaced configuration bits in case the bios sets up an interlaced
  mode and we want to set up the progressive mode (current kernels
  don't support interlaced). The actual feature work to support
  interlaced depends upon (and conflicts with) this bugfix.

- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
  this for ivybridge, but some recent bug reports indicate that we
  need this on Sandybridge, too. But in a slightly different flavour
  and with other fixes and reworks on top. Additionally there are some
  forcewake cleanup patches heading to -next that would conflict with
  currrent -fixes.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 109 insertions, 31 deletions

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 8e3c46d67cb3..b58b56187065 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -392,7 +392,7 @@ static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
 
 	sg_init_one(sg, buf->buf, buf->size);
 
-	ret = virtqueue_add_buf(vq, sg, 0, 1, buf);
+	ret = virtqueue_add_buf(vq, sg, 0, 1, buf, GFP_ATOMIC);
 	virtqueue_kick(vq);
 	return ret;
 }
@@ -457,7 +457,7 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
 	vq = portdev->c_ovq;
 
 	sg_init_one(sg, &cpkt, sizeof(cpkt));
-	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) >= 0) {
 		virtqueue_kick(vq);
 		while (!virtqueue_get_buf(vq, &len))
 			cpu_relax();
@@ -506,7 +506,7 @@ static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count,
 	reclaim_consumed_buffers(port);
 
 	sg_init_one(sg, in_buf, in_count);
-	ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf);
+	ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf, GFP_ATOMIC);
 
 	/* Tell Host to go! */
 	virtqueue_kick(out_vq);
@@ -1271,6 +1271,20 @@ static void remove_port(struct kref *kref)
 	kfree(port);
 }
 
+static void remove_port_data(struct port *port)
+{
+	struct port_buffer *buf;
+
+	/* Remove unused data this port might have received. */
+	discard_port_data(port);
+
+	reclaim_consumed_buffers(port);
+
+	/* Remove buffers we queued up for the Host to send us data in. */
+	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
+		free_buf(buf);
+}
+
 /*
  * Port got unplugged.  Remove port from portdev's list and drop the
  * kref reference.  If no userspace has this port opened, it will
@@ -1278,8 +1292,6 @@ static void remove_port(struct kref *kref)
  */
 static void unplug_port(struct port *port)
 {
-	struct port_buffer *buf;
-
 	spin_lock_irq(&port->portdev->ports_lock);
 	list_del(&port->list);
 	spin_unlock_irq(&port->portdev->ports_lock);
@@ -1300,14 +1312,7 @@ static void unplug_port(struct port *port)
 		hvc_remove(port->cons.hvc);
 	}
 
-	/* Remove unused data this port might have received. */
-	discard_port_data(port);
-
-	reclaim_consumed_buffers(port);
-
-	/* Remove buffers we queued up for the Host to send us data in. */
-	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
-		free_buf(buf);
+	remove_port_data(port);
 
 	/*
 	 * We should just assume the device itself has gone off --
@@ -1659,6 +1664,28 @@ static const struct file_operations portdev_fops = {
 	.owner = THIS_MODULE,
 };
 
+static void remove_vqs(struct ports_device *portdev)
+{
+	portdev->vdev->config->del_vqs(portdev->vdev);
+	kfree(portdev->in_vqs);
+	kfree(portdev->out_vqs);
+}
+
+static void remove_controlq_data(struct ports_device *portdev)
+{
+	struct port_buffer *buf;
+	unsigned int len;
+
+	if (!use_multiport(portdev))
+		return;
+
+	while ((buf = virtqueue_get_buf(portdev->c_ivq, &len)))
+		free_buf(buf);
+
+	while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq)))
+		free_buf(buf);
+}
+
 /*
  * Once we're further in boot, we get probed like any other virtio
  * device.
@@ -1764,9 +1791,7 @@ free_vqs:
 	/* The host might want to notify mgmt sw about device add failure */
 	__send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
 			   VIRTIO_CONSOLE_DEVICE_READY, 0);
-	vdev->config->del_vqs(vdev);
-	kfree(portdev->in_vqs);
-	kfree(portdev->out_vqs);
+	remove_vqs(portdev);
 free_chrdev:
 	unregister_chrdev(portdev->chr_major, "virtio-portsdev");
 free:
@@ -1804,21 +1829,8 @@ static void virtcons_remove(struct virtio_device *vdev)
 	 * have to just stop using the port, as the vqs are going
 	 * away.
 	 */
-	if (use_multiport(portdev)) {
-		struct port_buffer *buf;
-		unsigned int len;
-
-		while ((buf = virtqueue_get_buf(portdev->c_ivq, &len)))
-			free_buf(buf);
-
-		while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq)))
-			free_buf(buf);
-	}
-
-	vdev->config->del_vqs(vdev);
-	kfree(portdev->in_vqs);
-	kfree(portdev->out_vqs);
-
+	remove_controlq_data(portdev);
+	remove_vqs(portdev);
 	kfree(portdev);
 }
 
@@ -1832,6 +1844,68 @@ static unsigned int features[] = {
 	VIRTIO_CONSOLE_F_MULTIPORT,
 };
 
+#ifdef CONFIG_PM
+static int virtcons_freeze(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	struct port *port;
+
+	portdev = vdev->priv;
+
+	vdev->config->reset(vdev);
+
+	virtqueue_disable_cb(portdev->c_ivq);
+	cancel_work_sync(&portdev->control_work);
+	/*
+	 * Once more: if control_work_handler() was running, it would
+	 * enable the cb as the last step.
+	 */
+	virtqueue_disable_cb(portdev->c_ivq);
+	remove_controlq_data(portdev);
+
+	list_for_each_entry(port, &portdev->ports, list) {
+		virtqueue_disable_cb(port->in_vq);
+		virtqueue_disable_cb(port->out_vq);
+		/*
+		 * We'll ask the host later if the new invocation has
+		 * the port opened or closed.
+		 */
+		port->host_connected = false;
+		remove_port_data(port);
+	}
+	remove_vqs(portdev);
+
+	return 0;
+}
+
+static int virtcons_restore(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	struct port *port;
+	int ret;
+
+	portdev = vdev->priv;
+
+	ret = init_vqs(portdev);
+	if (ret)
+		return ret;
+
+	if (use_multiport(portdev))
+		fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+
+	list_for_each_entry(port, &portdev->ports, list) {
+		port->in_vq = portdev->in_vqs[port->id];
+		port->out_vq = portdev->out_vqs[port->id];
+
+		fill_queue(port->in_vq, &port->inbuf_lock);
+
+		/* Get port open/close status on the host */
+		send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+	}
+	return 0;
+}
+#endif
+
 static struct virtio_driver virtio_console = {
 	.feature_table = features,
 	.feature_table_size = ARRAY_SIZE(features),
@@ -1841,6 +1915,10 @@ static struct virtio_driver virtio_console = {
 	.probe =	virtcons_probe,
 	.remove =	virtcons_remove,
 	.config_changed = config_intr,
+#ifdef CONFIG_PM
+	.freeze =	virtcons_freeze,
+	.restore =	virtcons_restore,
+#endif
 };
 
 static int __init init(void)