Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

1 files changed, 128 insertions, 6 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 0515095574e7..44e4b0465587 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -39,9 +39,10 @@
 #include "inc/hw/dmcu.h"
 #include "dml/display_mode_lib.h"
 
-#define DC_VER "3.2.17"
+#define DC_VER "3.2.27"
 
 #define MAX_SURFACES 3
+#define MAX_PLANES 6
 #define MAX_STREAMS 6
 #define MAX_SINKS_PER_LINK 4
 
@@ -53,6 +54,41 @@ struct dc_versions {
 	struct dmcu_version dmcu_version;
 };
 
+enum dc_plane_type {
+	DC_PLANE_TYPE_INVALID,
+	DC_PLANE_TYPE_DCE_RGB,
+	DC_PLANE_TYPE_DCE_UNDERLAY,
+	DC_PLANE_TYPE_DCN_UNIVERSAL,
+};
+
+struct dc_plane_cap {
+	enum dc_plane_type type;
+	uint32_t blends_with_above : 1;
+	uint32_t blends_with_below : 1;
+	uint32_t per_pixel_alpha : 1;
+	struct {
+		uint32_t argb8888 : 1;
+		uint32_t nv12 : 1;
+		uint32_t fp16 : 1;
+	} pixel_format_support;
+	// max upscaling factor x1000
+	// upscaling factors are always >= 1
+	// for example, 1080p -> 8K is 4.0, or 4000 raw value
+	struct {
+		uint32_t argb8888;
+		uint32_t nv12;
+		uint32_t fp16;
+	} max_upscale_factor;
+	// max downscale factor x1000
+	// downscale factors are always <= 1
+	// for example, 8K -> 1080p is 0.25, or 250 raw value
+	struct {
+		uint32_t argb8888;
+		uint32_t nv12;
+		uint32_t fp16;
+	} max_downscale_factor;
+};
+
 struct dc_caps {
 	uint32_t max_streams;
 	uint32_t max_links;
@@ -73,6 +109,7 @@ struct dc_caps {
 	bool force_dp_tps4_for_cp2520;
 	bool disable_dp_clk_share;
 	bool psp_setup_panel_mode;
+	struct dc_plane_cap planes[MAX_PLANES];
 };
 
 struct dc_dcc_surface_param {
@@ -164,6 +201,10 @@ struct dc_config {
 	bool gpu_vm_support;
 	bool disable_disp_pll_sharing;
 	bool fbc_support;
+	bool optimize_edp_link_rate;
+	bool disable_fractional_pwm;
+	bool allow_seamless_boot_optimization;
+	bool power_down_display_on_boot;
 };
 
 enum visual_confirm {
@@ -203,7 +244,59 @@ struct dc_clocks {
 	int fclk_khz;
 	int phyclk_khz;
 	int dramclk_khz;
-};
+	bool p_state_change_support;
+};
+
+struct dc_bw_validation_profile {
+	bool enable;
+
+	unsigned long long total_ticks;
+	unsigned long long voltage_level_ticks;
+	unsigned long long watermark_ticks;
+	unsigned long long rq_dlg_ticks;
+
+	unsigned long long total_count;
+	unsigned long long skip_fast_count;
+	unsigned long long skip_pass_count;
+	unsigned long long skip_fail_count;
+};
+
+#define BW_VAL_TRACE_SETUP() \
+		unsigned long long end_tick = 0; \
+		unsigned long long voltage_level_tick = 0; \
+		unsigned long long watermark_tick = 0; \
+		unsigned long long start_tick = dc->debug.bw_val_profile.enable ? \
+				dm_get_timestamp(dc->ctx) : 0
+
+#define BW_VAL_TRACE_COUNT() \
+		if (dc->debug.bw_val_profile.enable) \
+			dc->debug.bw_val_profile.total_count++
+
+#define BW_VAL_TRACE_SKIP(status) \
+		if (dc->debug.bw_val_profile.enable) { \
+			if (!voltage_level_tick) \
+				voltage_level_tick = dm_get_timestamp(dc->ctx); \
+			dc->debug.bw_val_profile.skip_ ## status ## _count++; \
+		}
+
+#define BW_VAL_TRACE_END_VOLTAGE_LEVEL() \
+		if (dc->debug.bw_val_profile.enable) \
+			voltage_level_tick = dm_get_timestamp(dc->ctx)
+
+#define BW_VAL_TRACE_END_WATERMARKS() \
+		if (dc->debug.bw_val_profile.enable) \
+			watermark_tick = dm_get_timestamp(dc->ctx)
+
+#define BW_VAL_TRACE_FINISH() \
+		if (dc->debug.bw_val_profile.enable) { \
+			end_tick = dm_get_timestamp(dc->ctx); \
+			dc->debug.bw_val_profile.total_ticks += end_tick - start_tick; \
+			dc->debug.bw_val_profile.voltage_level_ticks += voltage_level_tick - start_tick; \
+			if (watermark_tick) { \
+				dc->debug.bw_val_profile.watermark_ticks += watermark_tick - voltage_level_tick; \
+				dc->debug.bw_val_profile.rq_dlg_ticks += end_tick - watermark_tick; \
+			} \
+		}
 
 struct dc_debug_options {
 	enum visual_confirm visual_confirm;
@@ -257,6 +350,8 @@ struct dc_debug_options {
 	bool skip_detection_link_training;
 	unsigned int force_odm_combine; //bit vector based on otg inst
 	unsigned int force_fclk_khz;
+	bool disable_tri_buf;
+	struct dc_bw_validation_profile bw_val_profile;
 };
 
 struct dc_debug_data {
@@ -265,6 +360,14 @@ struct dc_debug_data {
 	uint32_t auxErrorCount;
 };
 
+struct dc_bounding_box_overrides {
+	int sr_exit_time_ns;
+	int sr_enter_plus_exit_time_ns;
+	int urgent_latency_ns;
+	int percent_of_ideal_drambw;
+	int dram_clock_change_latency_ns;
+};
+
 struct dc_state;
 struct resource_pool;
 struct dce_hwseq;
@@ -274,6 +377,7 @@ struct dc {
 	struct dc_cap_funcs cap_funcs;
 	struct dc_config config;
 	struct dc_debug_options debug;
+	struct dc_bounding_box_overrides bb_overrides;
 	struct dc_context *ctx;
 
 	uint8_t link_count;
@@ -298,8 +402,12 @@ struct dc {
 	struct hw_sequencer_funcs hwss;
 	struct dce_hwseq *hwseq;
 
+	/* Require to optimize clocks and bandwidth for added/removed planes */
 	bool optimized_required;
 
+	/* Require to maintain clocks and bandwidth for UEFI enabled HW */
+	bool optimize_seamless_boot;
+
 	/* FBC compressor */
 	struct compressor *fbc_compressor;
 
@@ -327,6 +435,7 @@ struct dc_init_data {
 	struct hw_asic_id asic_id;
 	void *driver; /* ctx */
 	struct cgs_device *cgs_device;
+	struct dc_bounding_box_overrides bb_overrides;
 
 	int num_virtual_links;
 	/*
@@ -597,7 +706,7 @@ struct dc_validation_set {
 	uint8_t plane_count;
 };
 
-bool dc_validate_seamless_boot_timing(struct dc *dc,
+bool dc_validate_seamless_boot_timing(const struct dc *dc,
 				const struct dc_sink *sink,
 				struct dc_crtc_timing *crtc_timing);
 
@@ -605,9 +714,14 @@ enum dc_status dc_validate_plane(struct dc *dc, const struct dc_plane_state *pla
 
 void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx *info);
 
+/*
+ * fast_validate: we return after determining if we can support the new state,
+ * but before we populate the programming info
+ */
 enum dc_status dc_validate_global_state(
 		struct dc *dc,
-		struct dc_state *new_ctx);
+		struct dc_state *new_ctx,
+		bool fast_validate);
 
 
 void dc_resource_state_construct(
@@ -636,7 +750,8 @@ void dc_resource_state_destruct(struct dc_state *context);
 bool dc_commit_state(struct dc *dc, struct dc_state *context);
 
 
-struct dc_state *dc_create_state(void);
+struct dc_state *dc_create_state(struct dc *dc);
+struct dc_state *dc_copy_state(struct dc_state *src_ctx);
 void dc_retain_state(struct dc_state *context);
 void dc_release_state(struct dc_state *context);
 
@@ -648,9 +763,16 @@ struct dpcd_caps {
 	union dpcd_rev dpcd_rev;
 	union max_lane_count max_ln_count;
 	union max_down_spread max_down_spread;
+	union dprx_feature dprx_feature;
+
+	/* valid only for eDP v1.4 or higher*/
+	uint8_t edp_supported_link_rates_count;
+	enum dc_link_rate edp_supported_link_rates[8];
 
 	/* dongle type (DP converter, CV smart dongle) */
 	enum display_dongle_type dongle_type;
+	/* branch device or sink device */
+	bool is_branch_dev;
 	/* Dongle's downstream count. */
 	union sink_count sink_count;
 	/* If dongle_type == DISPLAY_DONGLE_DP_HDMI_CONVERTER,
@@ -666,11 +788,11 @@ struct dpcd_caps {
 	int8_t branch_dev_name[6];
 	int8_t branch_hw_revision;
 	int8_t branch_fw_revision[2];
-	uint8_t link_rate_set;
 
 	bool allow_invalid_MSA_timing_param;
 	bool panel_mode_edp;
 	bool dpcd_display_control_capable;
+	bool ext_receiver_cap_field_present;
 };
 
 #include "dc_link.h"