summaryrefslogtreecommitdiff
path: root/drivers/i2c/i2c-core.c
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2012-02-28 18:26:31 +0530
committerWolfram Sang <wsa@the-dreams.de>2013-03-24 10:30:54 +0100
commit5f9296ba21b3c395e53dd84e7ff9578f97f24295 (patch)
treeddc02adbdaa1b703b04aeee9b8d8f1ca13fa2443 /drivers/i2c/i2c-core.c
parentee5c27440cc24d62ec463cce4c000bb32c5692c7 (diff)
downloadlinux-5f9296ba21b3c395e53dd84e7ff9578f97f24295.tar.gz
i2c: Add bus recovery infrastructure
Add i2c bus recovery infrastructure to i2c adapters as specified in the i2c protocol Rev. 03 section 3.1.16 titled "Bus clear". http://www.nxp.com/documents/user_manual/UM10204.pdf Sometimes during operation i2c bus hangs and we need to give dummy clocks to slave device to start the transfer again. Now we may have capability in the bus controller to generate these clocks or platform may have gpio pins which can be toggled to generate dummy clocks. This patch supports both. This patch also adds in generic bus recovery routines gpio or scl line based which can be used by bus controller. In addition controller driver may provide its own version of the bus recovery routine. This doesn't support multi-master recovery for now. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [wsa: changed gpio type to int and minor reformatting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/i2c-core.c')
-rw-r--r--drivers/i2c/i2c-core.c159
1 files changed, 159 insertions, 0 deletions
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f7dfe878a51b..0d873ba2e82e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -27,7 +27,9 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -109,6 +111,130 @@ static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
#define i2c_device_uevent NULL
#endif /* CONFIG_HOTPLUG */
+/* i2c bus recovery routines */
+static int get_scl_gpio_value(struct i2c_adapter *adap)
+{
+ return gpio_get_value(adap->bus_recovery_info->scl_gpio);
+}
+
+static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
+{
+ gpio_set_value(adap->bus_recovery_info->scl_gpio, val);
+}
+
+static int get_sda_gpio_value(struct i2c_adapter *adap)
+{
+ return gpio_get_value(adap->bus_recovery_info->sda_gpio);
+}
+
+static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ int ret = 0;
+
+ ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN |
+ GPIOF_OUT_INIT_HIGH, "i2c-scl");
+ if (ret) {
+ dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
+ return ret;
+ }
+
+ if (bri->get_sda) {
+ if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
+ /* work without SDA polling */
+ dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n",
+ bri->sda_gpio);
+ bri->get_sda = NULL;
+ }
+ }
+
+ return ret;
+}
+
+static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+
+ if (bri->get_sda)
+ gpio_free(bri->sda_gpio);
+
+ gpio_free(bri->scl_gpio);
+}
+
+/*
+ * We are generating clock pulses. ndelay() determines durating of clk pulses.
+ * We will generate clock with rate 100 KHz and so duration of both clock levels
+ * is: delay in ns = (10^6 / 100) / 2
+ */
+#define RECOVERY_NDELAY 5000
+#define RECOVERY_CLK_CNT 9
+
+static int i2c_generic_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ int i = 0, val = 1, ret = 0;
+
+ if (bri->prepare_recovery)
+ bri->prepare_recovery(bri);
+
+ /*
+ * By this time SCL is high, as we need to give 9 falling-rising edges
+ */
+ while (i++ < RECOVERY_CLK_CNT * 2) {
+ if (val) {
+ /* Break if SDA is high */
+ if (bri->get_sda && bri->get_sda(adap))
+ break;
+ /* SCL shouldn't be low here */
+ if (!bri->get_scl(adap)) {
+ dev_err(&adap->dev,
+ "SCL is stuck low, exit recovery\n");
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ val = !val;
+ bri->set_scl(adap, val);
+ ndelay(RECOVERY_NDELAY);
+ }
+
+ if (bri->unprepare_recovery)
+ bri->unprepare_recovery(bri);
+
+ return ret;
+}
+
+int i2c_generic_scl_recovery(struct i2c_adapter *adap)
+{
+ adap->bus_recovery_info->set_scl(adap, 1);
+ return i2c_generic_recovery(adap);
+}
+
+int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
+{
+ int ret;
+
+ ret = i2c_get_gpios_for_recovery(adap);
+ if (ret)
+ return ret;
+
+ ret = i2c_generic_recovery(adap);
+ i2c_put_gpios_for_recovery(adap);
+
+ return ret;
+}
+
+int i2c_recover_bus(struct i2c_adapter *adap)
+{
+ if (!adap->bus_recovery_info)
+ return -EOPNOTSUPP;
+
+ dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
+ return adap->bus_recovery_info->recover_bus(adap);
+}
+
static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
@@ -902,6 +1028,39 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
"Failed to create compatibility class link\n");
#endif
+ /* bus recovery specific initialization */
+ if (adap->bus_recovery_info) {
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+
+ if (!bri->recover_bus) {
+ dev_err(&adap->dev, "No recover_bus() found, not using recovery\n");
+ adap->bus_recovery_info = NULL;
+ goto exit_recovery;
+ }
+
+ /* Generic GPIO recovery */
+ if (bri->recover_bus == i2c_generic_gpio_recovery) {
+ if (!gpio_is_valid(bri->scl_gpio)) {
+ dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n");
+ adap->bus_recovery_info = NULL;
+ goto exit_recovery;
+ }
+
+ if (gpio_is_valid(bri->sda_gpio))
+ bri->get_sda = get_sda_gpio_value;
+ else
+ bri->get_sda = NULL;
+
+ bri->get_scl = get_scl_gpio_value;
+ bri->set_scl = set_scl_gpio_value;
+ } else if (!bri->set_scl || !bri->get_scl) {
+ /* Generic SCL recovery */
+ dev_err(&adap->dev, "No {get|set}_gpio() found, not using recovery\n");
+ adap->bus_recovery_info = NULL;
+ }
+ }
+
+exit_recovery:
/* create pre-declared device nodes */
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);