Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

4 files changed, 19 insertions, 4 deletions

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 8d51c1019dcd..37a3dabdce31 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -72,6 +72,7 @@ source "drivers/net/dsa/realtek/Kconfig"
 
 config NET_DSA_SMSC_LAN9303
 	tristate
+	depends on VLAN_8021Q || VLAN_8021Q=n
 	select NET_DSA_TAG_LAN9303
 	select REGMAP
 	help
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index d55784d19fa4..3969d89fa4db 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -10,6 +10,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 
 #include "lan9303.h"
@@ -1083,21 +1084,27 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
 static int lan9303_port_enable(struct dsa_switch *ds, int port,
 			       struct phy_device *phy)
 {
+	struct dsa_port *dp = dsa_to_port(ds, port);
 	struct lan9303 *chip = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
+	if (!dsa_port_is_user(dp))
 		return 0;
 
+	vlan_vid_add(dp->cpu_dp->master, htons(ETH_P_8021Q), port);
+
 	return lan9303_enable_processing_port(chip, port);
 }
 
 static void lan9303_port_disable(struct dsa_switch *ds, int port)
 {
+	struct dsa_port *dp = dsa_to_port(ds, port);
 	struct lan9303 *chip = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
+	if (!dsa_port_is_user(dp))
 		return;
 
+	vlan_vid_del(dp->cpu_dp->master, htons(ETH_P_8021Q), port);
+
 	lan9303_disable_processing_port(chip, port);
 	lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
 }
@@ -1310,7 +1317,7 @@ static int lan9303_probe_reset_gpio(struct lan9303 *chip,
 				     struct device_node *np)
 {
 	chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
-						   GPIOD_OUT_LOW);
+						   GPIOD_OUT_HIGH);
 	if (IS_ERR(chip->reset_gpio))
 		return PTR_ERR(chip->reset_gpio);
 
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 320ee7fe91a8..8a7a8093a156 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -2176,8 +2176,8 @@ static int gswip_remove(struct platform_device *pdev)
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
-		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
+		mdiobus_free(priv->ds->slave_mii_bus);
 	}
 
 	for (i = 0; i < priv->num_gphy_fw; i++)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 34036c555977..7d5e72cdc125 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2423,6 +2423,13 @@ static int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port,
 	if (!mv88e6xxx_max_vid(chip))
 		return -EOPNOTSUPP;
 
+	/* The ATU removal procedure needs the FID to be mapped in the VTU,
+	 * but FDB deletion runs concurrently with VLAN deletion. Flush the DSA
+	 * switchdev workqueue to ensure that all FDB entries are deleted
+	 * before we remove the VLAN.
+	 */
+	dsa_flush_workqueue();
+
 	mv88e6xxx_reg_lock(chip);
 
 	err = mv88e6xxx_port_get_pvid(chip, port, &pvid);