Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 10 insertions, 8 deletions

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c
index b3d2250c77d0..9156c9825a16 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c
@@ -392,11 +392,6 @@ void ionic_rx_fill(struct ionic_queue *q)
 			 q->dbval | q->head_idx);
 }
 
-static void ionic_rx_fill_cb(void *arg)
-{
-	ionic_rx_fill(arg);
-}
-
 void ionic_rx_empty(struct ionic_queue *q)
 {
 	struct ionic_desc_info *desc_info;
@@ -480,6 +475,7 @@ int ionic_rx_napi(struct napi_struct *napi, int budget)
 	struct ionic_cq *cq = napi_to_cq(napi);
 	struct ionic_dev *idev;
 	struct ionic_lif *lif;
+	u16 rx_fill_threshold;
 	u32 work_done = 0;
 	u32 flags = 0;
 
@@ -489,7 +485,9 @@ int ionic_rx_napi(struct napi_struct *napi, int budget)
 	work_done = ionic_cq_service(cq, budget,
 				     ionic_rx_service, NULL, NULL);
 
-	if (work_done)
+	rx_fill_threshold = min_t(u16, IONIC_RX_FILL_THRESHOLD,
+				  cq->num_descs / IONIC_RX_FILL_DIV);
+	if (work_done && ionic_q_space_avail(cq->bound_q) >= rx_fill_threshold)
 		ionic_rx_fill(cq->bound_q);
 
 	if (work_done < budget && napi_complete_done(napi, work_done)) {
@@ -518,6 +516,7 @@ int ionic_txrx_napi(struct napi_struct *napi, int budget)
 	struct ionic_dev *idev;
 	struct ionic_lif *lif;
 	struct ionic_cq *txcq;
+	u16 rx_fill_threshold;
 	u32 rx_work_done = 0;
 	u32 tx_work_done = 0;
 	u32 flags = 0;
@@ -531,8 +530,11 @@ int ionic_txrx_napi(struct napi_struct *napi, int budget)
 
 	rx_work_done = ionic_cq_service(rxcq, budget,
 					ionic_rx_service, NULL, NULL);
-	if (rx_work_done)
-		ionic_rx_fill_cb(rxcq->bound_q);
+
+	rx_fill_threshold = min_t(u16, IONIC_RX_FILL_THRESHOLD,
+				  rxcq->num_descs / IONIC_RX_FILL_DIV);
+	if (rx_work_done && ionic_q_space_avail(rxcq->bound_q) >= rx_fill_threshold)
+		ionic_rx_fill(rxcq->bound_q);
 
 	if (rx_work_done < budget && napi_complete_done(napi, rx_work_done)) {
 		ionic_dim_update(qcq);