Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 312 insertions, 0 deletions

diff --git a/drivers/net/wireless/st/cw1200/hwio.c b/drivers/net/wireless/st/cw1200/hwio.c
new file mode 100644
index 000000000000..ff230b7aeedd
--- /dev/null
+++ b/drivers/net/wireless/st/cw1200/hwio.c
@@ -0,0 +1,312 @@
+/*
+ * Low-level device IO routines for ST-Ericsson CW1200 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Based on:
+ * ST-Ericsson UMAC CW1200 driver, which is
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Ajitpal Singh <ajitpal.singh@lockless.no>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+
+#include "cw1200.h"
+#include "hwio.h"
+#include "hwbus.h"
+
+ /* Sdio addr is 4*spi_addr */
+#define SPI_REG_ADDR_TO_SDIO(spi_reg_addr) ((spi_reg_addr) << 2)
+#define SDIO_ADDR17BIT(buf_id, mpf, rfu, reg_id_ofs) \
+				((((buf_id)    & 0x1F) << 7) \
+				| (((mpf)        & 1) << 6) \
+				| (((rfu)        & 1) << 5) \
+				| (((reg_id_ofs) & 0x1F) << 0))
+#define MAX_RETRY		3
+
+
+static int __cw1200_reg_read(struct cw1200_common *priv, u16 addr,
+			     void *buf, size_t buf_len, int buf_id)
+{
+	u16 addr_sdio;
+	u32 sdio_reg_addr_17bit;
+
+	/* Check if buffer is aligned to 4 byte boundary */
+	if (WARN_ON(((unsigned long)buf & 3) && (buf_len > 4))) {
+		pr_err("buffer is not aligned.\n");
+		return -EINVAL;
+	}
+
+	/* Convert to SDIO Register Address */
+	addr_sdio = SPI_REG_ADDR_TO_SDIO(addr);
+	sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio);
+
+	return priv->hwbus_ops->hwbus_memcpy_fromio(priv->hwbus_priv,
+						  sdio_reg_addr_17bit,
+						  buf, buf_len);
+}
+
+static int __cw1200_reg_write(struct cw1200_common *priv, u16 addr,
+				const void *buf, size_t buf_len, int buf_id)
+{
+	u16 addr_sdio;
+	u32 sdio_reg_addr_17bit;
+
+	/* Convert to SDIO Register Address */
+	addr_sdio = SPI_REG_ADDR_TO_SDIO(addr);
+	sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio);
+
+	return priv->hwbus_ops->hwbus_memcpy_toio(priv->hwbus_priv,
+						sdio_reg_addr_17bit,
+						buf, buf_len);
+}
+
+static inline int __cw1200_reg_read_32(struct cw1200_common *priv,
+					u16 addr, u32 *val)
+{
+	__le32 tmp;
+	int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0);
+	*val = le32_to_cpu(tmp);
+	return i;
+}
+
+static inline int __cw1200_reg_write_32(struct cw1200_common *priv,
+					u16 addr, u32 val)
+{
+	__le32 tmp = cpu_to_le32(val);
+	return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0);
+}
+
+static inline int __cw1200_reg_read_16(struct cw1200_common *priv,
+					u16 addr, u16 *val)
+{
+	__le16 tmp;
+	int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0);
+	*val = le16_to_cpu(tmp);
+	return i;
+}
+
+static inline int __cw1200_reg_write_16(struct cw1200_common *priv,
+					u16 addr, u16 val)
+{
+	__le16 tmp = cpu_to_le16(val);
+	return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0);
+}
+
+int cw1200_reg_read(struct cw1200_common *priv, u16 addr, void *buf,
+			size_t buf_len)
+{
+	int ret;
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+	ret = __cw1200_reg_read(priv, addr, buf, buf_len, 0);
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int cw1200_reg_write(struct cw1200_common *priv, u16 addr, const void *buf,
+			size_t buf_len)
+{
+	int ret;
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+	ret = __cw1200_reg_write(priv, addr, buf, buf_len, 0);
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int cw1200_data_read(struct cw1200_common *priv, void *buf, size_t buf_len)
+{
+	int ret, retry = 1;
+	int buf_id_rx = priv->buf_id_rx;
+
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+
+	while (retry <= MAX_RETRY) {
+		ret = __cw1200_reg_read(priv,
+					ST90TDS_IN_OUT_QUEUE_REG_ID, buf,
+					buf_len, buf_id_rx + 1);
+		if (!ret) {
+			buf_id_rx = (buf_id_rx + 1) & 3;
+			priv->buf_id_rx = buf_id_rx;
+			break;
+		} else {
+			retry++;
+			mdelay(1);
+			pr_err("error :[%d]\n", ret);
+		}
+	}
+
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int cw1200_data_write(struct cw1200_common *priv, const void *buf,
+			size_t buf_len)
+{
+	int ret, retry = 1;
+	int buf_id_tx = priv->buf_id_tx;
+
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+
+	while (retry <= MAX_RETRY) {
+		ret = __cw1200_reg_write(priv,
+					 ST90TDS_IN_OUT_QUEUE_REG_ID, buf,
+					 buf_len, buf_id_tx);
+		if (!ret) {
+			buf_id_tx = (buf_id_tx + 1) & 31;
+			priv->buf_id_tx = buf_id_tx;
+			break;
+		} else {
+			retry++;
+			mdelay(1);
+			pr_err("error :[%d]\n", ret);
+		}
+	}
+
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int cw1200_indirect_read(struct cw1200_common *priv, u32 addr, void *buf,
+			 size_t buf_len, u32 prefetch, u16 port_addr)
+{
+	u32 val32 = 0;
+	int i, ret;
+
+	if ((buf_len / 2) >= 0x1000) {
+		pr_err("Can't read more than 0xfff words.\n");
+		return -EINVAL;
+	}
+
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+	/* Write address */
+	ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr);
+	if (ret < 0) {
+		pr_err("Can't write address register.\n");
+		goto out;
+	}
+
+	/* Read CONFIG Register Value - We will read 32 bits */
+	ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
+	if (ret < 0) {
+		pr_err("Can't read config register.\n");
+		goto out;
+	}
+
+	/* Set PREFETCH bit */
+	ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID,
+					val32 | prefetch);
+	if (ret < 0) {
+		pr_err("Can't write prefetch bit.\n");
+		goto out;
+	}
+
+	/* Check for PRE-FETCH bit to be cleared */
+	for (i = 0; i < 20; i++) {
+		ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
+		if (ret < 0) {
+			pr_err("Can't check prefetch bit.\n");
+			goto out;
+		}
+		if (!(val32 & prefetch))
+			break;
+
+		mdelay(i);
+	}
+
+	if (val32 & prefetch) {
+		pr_err("Prefetch bit is not cleared.\n");
+		goto out;
+	}
+
+	/* Read data port */
+	ret = __cw1200_reg_read(priv, port_addr, buf, buf_len, 0);
+	if (ret < 0) {
+		pr_err("Can't read data port.\n");
+		goto out;
+	}
+
+out:
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int cw1200_apb_write(struct cw1200_common *priv, u32 addr, const void *buf,
+			size_t buf_len)
+{
+	int ret;
+
+	if ((buf_len / 2) >= 0x1000) {
+		pr_err("Can't write more than 0xfff words.\n");
+		return -EINVAL;
+	}
+
+	priv->hwbus_ops->lock(priv->hwbus_priv);
+
+	/* Write address */
+	ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr);
+	if (ret < 0) {
+		pr_err("Can't write address register.\n");
+		goto out;
+	}
+
+	/* Write data port */
+	ret = __cw1200_reg_write(priv, ST90TDS_SRAM_DPORT_REG_ID,
+					buf, buf_len, 0);
+	if (ret < 0) {
+		pr_err("Can't write data port.\n");
+		goto out;
+	}
+
+out:
+	priv->hwbus_ops->unlock(priv->hwbus_priv);
+	return ret;
+}
+
+int __cw1200_irq_enable(struct cw1200_common *priv, int enable)
+{
+	u32 val32;
+	u16 val16;
+	int ret;
+
+	if (HIF_8601_SILICON == priv->hw_type) {
+		ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
+		if (ret < 0) {
+			pr_err("Can't read config register.\n");
+			return ret;
+		}
+
+		if (enable)
+			val32 |= ST90TDS_CONF_IRQ_RDY_ENABLE;
+		else
+			val32 &= ~ST90TDS_CONF_IRQ_RDY_ENABLE;
+
+		ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val32);
+		if (ret < 0) {
+			pr_err("Can't write config register.\n");
+			return ret;
+		}
+	} else {
+		ret = __cw1200_reg_read_16(priv, ST90TDS_CONFIG_REG_ID, &val16);
+		if (ret < 0) {
+			pr_err("Can't read control register.\n");
+			return ret;
+		}
+
+		if (enable)
+			val16 |= ST90TDS_CONT_IRQ_RDY_ENABLE;
+		else
+			val16 &= ~ST90TDS_CONT_IRQ_RDY_ENABLE;
+
+		ret = __cw1200_reg_write_16(priv, ST90TDS_CONFIG_REG_ID, val16);
+		if (ret < 0) {
+			pr_err("Can't write control register.\n");
+			return ret;
+		}
+	}
+	return 0;
+}