Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

1 files changed, 0 insertions, 61 deletions

diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
deleted file mode 100644
index 35af0739513b..000000000000
--- a/drivers/tty/serial/mrst_max3110.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _MRST_MAX3110_H
-#define _MRST_MAX3110_H
-
-#define MAX3110_HIGH_CLK	0x1	/* 3.6864 MHZ */
-#define MAX3110_LOW_CLK		0x0	/* 1.8432 MHZ */
-
-/* status bits for all 4 MAX3110 operate modes */
-#define MAX3110_READ_DATA_AVAILABLE	(1 << 15)
-#define MAX3110_WRITE_BUF_EMPTY		(1 << 14)
-#define MAX3110_BREAK			(1 << 10)
-
-#define WC_TAG			(3 << 14)
-#define RC_TAG			(1 << 14)
-#define WD_TAG			(2 << 14)
-#define RD_TAG			(0 << 14)
-
-/* bits def for write configuration */
-#define WC_FIFO_ENABLE_MASK	(1 << 13)
-#define WC_FIFO_ENABLE		(0 << 13)
-
-#define WC_SW_SHDI		(1 << 12)
-
-#define WC_IRQ_MASK		(0xF << 8)
-#define WC_TXE_IRQ_ENABLE	(1 << 11)	/* TX empty irq */
-#define WC_RXA_IRQ_ENABLE	(1 << 10)	/* RX available irq */
-#define WC_PAR_HIGH_IRQ_ENABLE	(1 << 9)
-#define WC_REC_ACT_IRQ_ENABLE	(1 << 8)
-
-#define WC_IRDA_ENABLE		(1 << 7)
-
-#define WC_STOPBITS_MASK	(1 << 6)
-#define WC_2_STOPBITS		(1 << 6)
-#define WC_1_STOPBITS		(0 << 6)
-
-#define WC_PARITY_ENABLE_MASK	(1 << 5)
-#define WC_PARITY_ENABLE	(1 << 5)
-
-#define WC_WORDLEN_MASK		(1 << 4)
-#define WC_7BIT_WORD		(1 << 4)
-#define WC_8BIT_WORD		(0 << 4)
-
-#define WC_BAUD_DIV_MASK	(0xF)
-#define WC_BAUD_DR1		(0x0)
-#define WC_BAUD_DR2		(0x1)
-#define WC_BAUD_DR4		(0x2)
-#define WC_BAUD_DR8		(0x3)
-#define WC_BAUD_DR16		(0x4)
-#define WC_BAUD_DR32		(0x5)
-#define WC_BAUD_DR64		(0x6)
-#define WC_BAUD_DR128		(0x7)
-#define WC_BAUD_DR3		(0x8)
-#define WC_BAUD_DR6		(0x9)
-#define WC_BAUD_DR12		(0xA)
-#define WC_BAUD_DR24		(0xB)
-#define WC_BAUD_DR48		(0xC)
-#define WC_BAUD_DR96		(0xD)
-#define WC_BAUD_DR192		(0xE)
-#define WC_BAUD_DR384		(0xF)
-
-#define M3110_RX_FIFO_DEPTH	8
-#endif