summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorDave Jones <davej@redhat.com>2009-07-23 18:11:12 -0700
committerDavid S. Miller <davem@davemloft.net>2009-07-23 18:11:12 -0700
commit2cf71d2e388cb0076b03f40f2fadfc590c228461 (patch)
tree472f6569c6b7a7abf34bffe3af2a3004d189b238 /drivers
parentc40674001b162f9218ba2a6f26188177c6a4e763 (diff)
downloadlinux-2cf71d2e388cb0076b03f40f2fadfc590c228461.tar.gz
Remove unnecessary forward declarations from velocity NIC driver.
By moving functions to before their first call, we eliminate the need to define forward references. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/via-velocity.c3261
1 files changed, 1580 insertions, 1681 deletions
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index d6a92b794f35..47be41a39d35 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -92,7 +92,6 @@ static int msglevel = MSG_LEVEL_INFO;
* Fetch the mask bits of the selected CAM and store them into the
* provided mask buffer.
*/
-
static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
{
int i;
@@ -121,7 +120,6 @@ static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
*
* Store a new mask into a CAM
*/
-
static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
{
int i;
@@ -166,7 +164,6 @@ static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
*
* Load an address or vlan tag into a CAM
*/
-
static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
{
int i;
@@ -222,7 +219,6 @@ static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
* reset the Wake on lan features. This function doesn't restore
* the rest of the logic from the result of sleep/wakeup
*/
-
static void mac_wol_reset(struct mac_regs __iomem *regs)
{
@@ -241,7 +237,6 @@ static void mac_wol_reset(struct mac_regs __iomem *regs)
writew(0xFFFF, &regs->WOLSRClr);
}
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static const struct ethtool_ops velocity_ethtool_ops;
/*
@@ -369,76 +364,14 @@ static int rx_copybreak = 200;
module_param(rx_copybreak, int, 0644);
MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
-static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr,
- const struct velocity_info_tbl *info);
-static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev);
-static void velocity_print_info(struct velocity_info *vptr);
-static int velocity_open(struct net_device *dev);
-static int velocity_change_mtu(struct net_device *dev, int mtu);
-static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t velocity_intr(int irq, void *dev_instance);
-static void velocity_set_multi(struct net_device *dev);
-static struct net_device_stats *velocity_get_stats(struct net_device *dev);
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int velocity_close(struct net_device *dev);
-static int velocity_receive_frame(struct velocity_info *, int idx);
-static int velocity_alloc_rx_buf(struct velocity_info *, int idx);
-static void velocity_free_rd_ring(struct velocity_info *vptr);
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *);
-static int velocity_soft_reset(struct velocity_info *vptr);
-static void mii_init(struct velocity_info *vptr, u32 mii_status);
-static u32 velocity_get_link(struct net_device *dev);
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr);
-static void velocity_print_link_status(struct velocity_info *vptr);
-static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs);
-static void velocity_shutdown(struct velocity_info *vptr);
-static void enable_flow_control_ability(struct velocity_info *vptr);
-static void enable_mii_autopoll(struct mac_regs __iomem *regs);
-static int velocity_mii_read(struct mac_regs __iomem *, u8 byIdx, u16 *pdata);
-static int velocity_mii_write(struct mac_regs __iomem *, u8 byMiiAddr, u16 data);
-static u32 mii_check_media_mode(struct mac_regs __iomem *regs);
-static u32 check_connection_type(struct mac_regs __iomem *regs);
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status);
-
#ifdef CONFIG_PM
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state);
-static int velocity_resume(struct pci_dev *pdev);
-
static DEFINE_SPINLOCK(velocity_dev_list_lock);
static LIST_HEAD(velocity_dev_list);
-
-#endif
-
-#if defined(CONFIG_PM) && defined(CONFIG_INET)
-
-static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr);
-
-static struct notifier_block velocity_inetaddr_notifier = {
- .notifier_call = velocity_netdev_event,
-};
-
-static void velocity_register_notifier(void)
-{
- register_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-static void velocity_unregister_notifier(void)
-{
- unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-#else
-
-#define velocity_register_notifier() do {} while (0)
-#define velocity_unregister_notifier() do {} while (0)
-
#endif
/*
* Internal board variants. At the moment we have only one
*/
-
static struct velocity_info_tbl chip_info_table[] = {
{CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
{ }
@@ -448,7 +381,6 @@ static struct velocity_info_tbl chip_info_table[] = {
* Describe the PCI device identifiers that we support in this
* device driver. Used for hotplug autoloading.
*/
-
static const struct pci_device_id velocity_id_table[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
{ }
@@ -463,7 +395,6 @@ MODULE_DEVICE_TABLE(pci, velocity_id_table);
* Given a chip identifier return a suitable description. Returns
* a pointer a static string valid while the driver is loaded.
*/
-
static const char __devinit *get_chip_name(enum chip_type chip_id)
{
int i;
@@ -481,7 +412,6 @@ static const char __devinit *get_chip_name(enum chip_type chip_id)
* unload for each active device that is present. Disconnects
* the device from the network layer and frees all the resources
*/
-
static void __devexit velocity_remove1(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
@@ -519,7 +449,6 @@ static void __devexit velocity_remove1(struct pci_dev *pdev)
* all the verification and checking as well as reporting so that
* we don't duplicate code for each option.
*/
-
static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
{
if (val == -1)
@@ -548,7 +477,6 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max,
* all the verification and checking as well as reporting so that
* we don't duplicate code for each option.
*/
-
static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname)
{
(*opt) &= (~flag);
@@ -574,7 +502,6 @@ static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag
* Turn the module and command options into a single structure
* for the current device
*/
-
static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
{
@@ -600,7 +527,6 @@ static void __devinit velocity_get_options(struct velocity_opt *opts, int index,
* Initialize the content addressable memory used for filters. Load
* appropriately according to the presence of VLAN
*/
-
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
struct mac_regs __iomem *regs = vptr->mac_regs;
@@ -673,7 +599,6 @@ static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
* Reset the ownership and status for the receive ring side.
* Hand all the receive queue to the NIC.
*/
-
static void velocity_rx_reset(struct velocity_info *vptr)
{
@@ -695,6 +620,647 @@ static void velocity_rx_reset(struct velocity_info *vptr)
}
/**
+ * velocity_get_opt_media_mode - get media selection
+ * @vptr: velocity adapter
+ *
+ * Get the media mode stored in EEPROM or module options and load
+ * mii_status accordingly. The requested link state information
+ * is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+ u32 status = 0;
+
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_AUTO:
+ status = VELOCITY_AUTONEG_ENABLE;
+ break;
+ case SPD_DPX_100_FULL:
+ status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_10_FULL:
+ status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_100_HALF:
+ status = VELOCITY_SPEED_100;
+ break;
+ case SPD_DPX_10_HALF:
+ status = VELOCITY_SPEED_10;
+ break;
+ }
+ vptr->mii_status = status;
+ return status;
+}
+
+/**
+ * safe_disable_mii_autopoll - autopoll off
+ * @regs: velocity registers
+ *
+ * Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ u16 ww;
+
+ /* turn off MAUTO */
+ writeb(0, &regs->MIICR);
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+}
+
+/**
+ * enable_mii_autopoll - turn on autopolling
+ * @regs: velocity registers
+ *
+ * Enable the MII link status autopoll feature on the Velocity
+ * hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ int ii;
+
+ writeb(0, &(regs->MIICR));
+ writeb(MIIADR_SWMPL, &regs->MIIADR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+
+ writeb(MIICR_MAUTO, &regs->MIICR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+
+}
+
+/**
+ * velocity_mii_read - read MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: buffer for received data
+ *
+ * Perform a single read of an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ writeb(index, &regs->MIIADR);
+
+ BYTE_REG_BITS_ON(MIICR_RCMD, &regs->MIICR);
+
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ if (!(readb(&regs->MIICR) & MIICR_RCMD))
+ break;
+ }
+
+ *data = readw(&regs->MIIDATA);
+
+ enable_mii_autopoll(regs);
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+
+/**
+ * mii_check_media_mode - check media state
+ * @regs: velocity registers
+ *
+ * Check the current MII status and determine the link status
+ * accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u16 ANAR;
+
+ if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
+ status |= VELOCITY_LINK_FAIL;
+
+ if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
+ status |= (VELOCITY_SPEED_1000);
+ else {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if (ANAR & ANAR_TXFD)
+ status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+ else if (ANAR & ANAR_TX)
+ status |= VELOCITY_SPEED_100;
+ else if (ANAR & ANAR_10FD)
+ status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+ else
+ status |= (VELOCITY_SPEED_10);
+ }
+
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+ == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+ if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_mii_write - write MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: 16bit data for the MII register
+ *
+ * Perform a single write to an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ /* MII reg offset */
+ writeb(mii_addr, &regs->MIIADR);
+ /* set MII data */
+ writew(data, &regs->MIIDATA);
+
+ /* turn on MIICR_WCMD */
+ BYTE_REG_BITS_ON(MIICR_WCMD, &regs->MIICR);
+
+ /* W_MAX_TIMEOUT is the timeout period */
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(5);
+ if (!(readb(&regs->MIICR) & MIICR_WCMD))
+ break;
+ }
+ enable_mii_autopoll(regs);
+
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * set_mii_flow_control - flow control setup
+ * @vptr: velocity interface
+ *
+ * Set up the flow control on this interface according to
+ * the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+ /*Enable or Disable PAUSE in ANAR */
+ switch (vptr->options.flow_cntl) {
+ case FLOW_CNTL_TX:
+ MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_RX:
+ MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * mii_set_auto_on - autonegotiate on
+ * @vptr: velocity
+ *
+ * Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
+ MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+ else
+ MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u8 PHYSR0;
+ u16 ANAR;
+ PHYSR0 = readb(&regs->PHYSR0);
+
+ /*
+ if (!(PHYSR0 & PHYSR0_LINKGD))
+ status|=VELOCITY_LINK_FAIL;
+ */
+
+ if (PHYSR0 & PHYSR0_FDPX)
+ status |= VELOCITY_DUPLEX_FULL;
+
+ if (PHYSR0 & PHYSR0_SPDG)
+ status |= VELOCITY_SPEED_1000;
+ else if (PHYSR0 & PHYSR0_SPD10)
+ status |= VELOCITY_SPEED_10;
+ else
+ status |= VELOCITY_SPEED_100;
+
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+ == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+ if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+
+
+/**
+ * velocity_set_media_mode - set media mode
+ * @mii_status: old MII link state
+ *
+ * Check the media link state and configure the flow control
+ * PHY and also velocity hardware setup accordingly. In particular
+ * we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+ u32 curr_status;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+ curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+
+ /* Set mii link status */
+ set_mii_flow_control(vptr);
+
+ /*
+ Check if new status is consisent with current status
+ if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
+ || (mii_status==curr_status)) {
+ vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
+ vptr->mii_status=check_connection_type(vptr->mac_regs);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
+ return 0;
+ }
+ */
+
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+
+ /*
+ * If connection type is AUTO
+ */
+ if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
+ /* clear force MAC mode bit */
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+ /* set duplex mode of MAC according to duplex mode of MII */
+ MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
+
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ } else {
+ u16 ANAR;
+ u8 CHIPGCR;
+
+ /*
+ * 1. if it's 3119, disable frame bursting in halfduplex mode
+ * and enable it in fullduplex mode
+ * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+ * 3. only enable CD heart beat counter in 10HD mode
+ */
+
+ /* set force MAC mode bit */
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+ CHIPGCR = readb(&regs->CHIPGCR);
+ CHIPGCR &= ~CHIPGCR_FCGMII;
+
+ if (mii_status & VELOCITY_DUPLEX_FULL) {
+ CHIPGCR |= CHIPGCR_FCFDX;
+ writeb(CHIPGCR, &regs->CHIPGCR);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+ } else {
+ CHIPGCR &= ~CHIPGCR_FCFDX;
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
+ writeb(CHIPGCR, &regs->CHIPGCR);
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+ }
+
+ MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+
+ if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+ /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
+ velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
+ ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
+ if (mii_status & VELOCITY_SPEED_100) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ANAR_TXFD;
+ else
+ ANAR |= ANAR_TX;
+ } else {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ANAR_10FD;
+ else
+ ANAR |= ANAR_10;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
+ }
+ /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+ /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+ return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ * velocity_print_link_status - link status reporting
+ * @vptr: velocity to report on
+ *
+ * Turn the link status of the velocity card into a kernel log
+ * description of the new link state, detailing speed and duplex
+ * status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
+ } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
+ else if (vptr->mii_status & VELOCITY_SPEED_100)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
+
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
+ } else {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_100_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
+ break;
+ case SPD_DPX_100_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
+ break;
+ case SPD_DPX_10_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
+ break;
+ case SPD_DPX_10_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/**
+ * enable_flow_control_ability - flow control
+ * @vptr: veloity to configure
+ *
+ * Set up flow control according to the flow control options
+ * determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ switch (vptr->options.flow_cntl) {
+
+ case FLOW_CNTL_DEFAULT:
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, &regs->PHYSR0))
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ else
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, &regs->PHYSR0))
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ else
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX:
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_RX:
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ default:
+ break;
+ }
+
+}
+
+/**
+ * velocity_soft_reset - soft reset
+ * @vptr: velocity to reset
+ *
+ * Kick off a soft reset of the velocity adapter and then poll
+ * until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i = 0;
+
+ writel(CR0_SFRST, &regs->CR0Set);
+
+ for (i = 0; i < W_MAX_TIMEOUT; i++) {
+ udelay(5);
+ if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
+ break;
+ }
+
+ if (i == W_MAX_TIMEOUT) {
+ writel(CR0_FORSRST, &regs->CR0Set);
+ /* FIXME: PCI POSTING */
+ /* delay 2ms */
+ mdelay(2);
+ }
+ return 0;
+}
+
+/**
+ * velocity_set_multi - filter list change callback
+ * @dev: network device
+ *
+ * Called by the network layer when the filter lists need to change
+ * for a velocity adapter. Reload the CAMs with the new address
+ * filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u8 rx_mode;
+ int i;
+ struct dev_mc_list *mclist;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ writel(0xffffffff, &regs->MARCAM[0]);
+ writel(0xffffffff, &regs->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+ } else if ((dev->mc_count > vptr->multicast_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ writel(0xffffffff, &regs->MARCAM[0]);
+ writel(0xffffffff, &regs->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB);
+ } else {
+ int offset = MCAM_SIZE - vptr->multicast_limit;
+ mac_get_cam_mask(regs, vptr->mCAMmask);
+
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ mac_set_cam(regs, i + offset, mclist->dmi_addr);
+ vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+ }
+
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
+ }
+ if (dev->mtu > 1500)
+ rx_mode |= RCR_AL;
+
+ BYTE_REG_BITS_ON(rx_mode, &regs->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ * mii_init - set up MII
+ * @vptr: velocity adapter
+ * @mii_status: links tatus
+ *
+ * Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+ u16 BMCR;
+
+ switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+ case PHYID_CICADA_CS8201:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue.
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ /*
+ * Turn on Link/Activity LED enable bit for CIS8201
+ */
+ MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
+ break;
+ case PHYID_VT3216_32BIT:
+ case PHYID_VT3216_64BIT:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ break;
+
+ case PHYID_MARVELL_1000:
+ case PHYID_MARVELL_1000S:
+ /*
+ * Assert CRS on Transmit
+ */
+ MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ break;
+ default:
+ ;
+ }
+ velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
+ if (BMCR & BMCR_ISO) {
+ BMCR &= ~BMCR_ISO;
+ velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
+ }
+}
+
+
+/**
* velocity_init_registers - initialise MAC registers
* @vptr: velocity to init
* @type: type of initialisation (hot or cold)
@@ -702,7 +1268,6 @@ static void velocity_rx_reset(struct velocity_info *vptr)
* Initialise the MAC on a reset or on first set up on the
* hardware.
*/
-
static void velocity_init_registers(struct velocity_info *vptr,
enum velocity_init_type type)
{
@@ -818,288 +1383,29 @@ static void velocity_init_registers(struct velocity_info *vptr,
}
}
-/**
- * velocity_soft_reset - soft reset
- * @vptr: velocity to reset
- *
- * Kick off a soft reset of the velocity adapter and then poll
- * until the reset sequence has completed before returning.
- */
-
-static int velocity_soft_reset(struct velocity_info *vptr)
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
{
struct mac_regs __iomem *regs = vptr->mac_regs;
- int i = 0;
-
- writel(CR0_SFRST, &regs->CR0Set);
-
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
- udelay(5);
- if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
- break;
- }
-
- if (i == W_MAX_TIMEOUT) {
- writel(CR0_FORSRST, &regs->CR0Set);
- /* FIXME: PCI POSTING */
- /* delay 2ms */
- mdelay(2);
- }
- return 0;
-}
-
-static const struct net_device_ops velocity_netdev_ops = {
- .ndo_open = velocity_open,
- .ndo_stop = velocity_close,
- .ndo_start_xmit = velocity_xmit,
- .ndo_get_stats = velocity_get_stats,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_set_multicast_list = velocity_set_multi,
- .ndo_change_mtu = velocity_change_mtu,
- .ndo_do_ioctl = velocity_ioctl,
- .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
- .ndo_vlan_rx_register = velocity_vlan_rx_register,
-};
-
-/**
- * velocity_found1 - set up discovered velocity card
- * @pdev: PCI device
- * @ent: PCI device table entry that matched
- *
- * Configure a discovered adapter from scratch. Return a negative
- * errno error code on failure paths.
- */
-
-static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- static int first = 1;
- struct net_device *dev;
- int i;
- const char *drv_string;
- const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
- struct velocity_info *vptr;
- struct mac_regs __iomem *regs;
- int ret = -ENOMEM;
-
- /* FIXME: this driver, like almost all other ethernet drivers,
- * can support more than MAX_UNITS.
- */
- if (velocity_nics >= MAX_UNITS) {
- dev_notice(&pdev->dev, "already found %d NICs.\n",
- velocity_nics);
- return -ENODEV;
- }
-
- dev = alloc_etherdev(sizeof(struct velocity_info));
- if (!dev) {
- dev_err(&pdev->dev, "allocate net device failed.\n");
- goto out;
- }
-
- /* Chain it all together */
-
- SET_NETDEV_DEV(dev, &pdev->dev);
- vptr = netdev_priv(dev);
-
-
- if (first) {
- printk(KERN_INFO "%s Ver. %s\n",
- VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
- printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
- printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
- first = 0;
- }
-
- velocity_init_info(pdev, vptr, info);
-
- vptr->dev = dev;
-
- dev->irq = pdev->irq;
-
- ret = pci_enable_device(pdev);
- if (ret < 0)
- goto err_free_dev;
-
- ret = velocity_get_pci_info(vptr, pdev);
- if (ret < 0) {
- /* error message already printed */
- goto err_disable;
- }
-
- ret = pci_request_regions(pdev, VELOCITY_NAME);
- if (ret < 0) {
- dev_err(&pdev->dev, "No PCI resources.\n");
- goto err_disable;
- }
-
- regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
- if (regs == NULL) {
- ret = -EIO;
- goto err_release_res;
- }
-
- vptr->mac_regs = regs;
-
- mac_wol_reset(regs);
-
- dev->base_addr = vptr->ioaddr;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = readb(&regs->PAR[i]);
-
-
- drv_string = dev_driver_string(&pdev->dev);
-
- velocity_get_options(&vptr->options, velocity_nics, drv_string);
-
- /*
- * Mask out the options cannot be set to the chip
- */
-
- vptr->options.flags &= info->flags;
+ int avail, dirty, unusable;
/*
- * Enable the chip specified capbilities
+ * RD number must be equal to 4X per hardware spec
+ * (programming guide rev 1.20, p.13)
*/
+ if (vptr->rx.filled < 4)
+ return;
- vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
-
- vptr->wol_opts = vptr->options.wol_opts;
- vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
-
- vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
-
- dev->irq = pdev->irq;
- dev->netdev_ops = &velocity_netdev_ops;
- dev->ethtool_ops = &velocity_ethtool_ops;
-
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
- NETIF_F_HW_VLAN_RX;
-
- if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
- dev->features |= NETIF_F_IP_CSUM;
-
- ret = register_netdev(dev);
- if (ret < 0)
- goto err_iounmap;
-
- if (!velocity_get_link(dev)) {
- netif_carrier_off(dev);
- vptr->mii_status |= VELOCITY_LINK_FAIL;
- }
-
- velocity_print_info(vptr);
- pci_set_drvdata(pdev, dev);
-
- /* and leave the chip powered down */
-
- pci_set_power_state(pdev, PCI_D3hot);
-#ifdef CONFIG_PM
- {
- unsigned long flags;
-
- spin_lock_irqsave(&velocity_dev_list_lock, flags);
- list_add(&vptr->list, &velocity_dev_list);
- spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
- }
-#endif
- velocity_nics++;
-out:
- return ret;
-
-err_iounmap:
- iounmap(regs);
-err_release_res:
- pci_release_regions(pdev);
-err_disable:
- pci_disable_device(pdev);
-err_free_dev:
- free_netdev(dev);
- goto out;
-}
-
-/**
- * velocity_print_info - per driver data
- * @vptr: velocity
- *
- * Print per driver data as the kernel driver finds Velocity
- * hardware
- */
-
-static void __devinit velocity_print_info(struct velocity_info *vptr)
-{
- struct net_device *dev = vptr->dev;
-
- printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
- printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- dev->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
-}
-
-/**
- * velocity_init_info - init private data
- * @pdev: PCI device
- * @vptr: Velocity info
- * @info: Board type
- *
- * Set up the initial velocity_info struct for the device that has been
- * discovered.
- */
-
-static void __devinit velocity_init_info(struct pci_dev *pdev,
- struct velocity_info *vptr,
- const struct velocity_info_tbl *info)
-{
- memset(vptr, 0, sizeof(struct velocity_info));
-
- vptr->pdev = pdev;
- vptr->chip_id = info->chip_id;
- vptr->tx.numq = info->txqueue;
- vptr->multicast_limit = MCAM_SIZE;
- spin_lock_init(&vptr->lock);
- INIT_LIST_HEAD(&vptr->list);
-}
-
-/**
- * velocity_get_pci_info - retrieve PCI info for device
- * @vptr: velocity device
- * @pdev: PCI device it matches
- *
- * Retrieve the PCI configuration space data that interests us from
- * the kernel PCI layer
- */
-
-static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
-{
- vptr->rev_id = pdev->revision;
-
- pci_set_master(pdev);
-
- vptr->ioaddr = pci_resource_start(pdev, 0);
- vptr->memaddr = pci_resource_start(pdev, 1);
-
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #0 is not an I/O resource, aborting.\n");
- return -EINVAL;
- }
-
- if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #1 is an I/O resource, aborting.\n");
- return -EINVAL;
- }
+ wmb();
- if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
- dev_err(&pdev->dev, "region #1 is too small.\n");
- return -EINVAL;
+ unusable = vptr->rx.filled & 0x0003;
+ dirty = vptr->rx.dirty - unusable;
+ for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
+ dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+ vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
}
- vptr->pdev = pdev;
- return 0;
+ writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+ vptr->rx.filled = unusable;
}
/**
@@ -1109,7 +1415,6 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc
* Allocate PCI mapped DMA rings for the receive and transmit layer
* to use.
*/
-
static int velocity_init_dma_rings(struct velocity_info *vptr)
{
struct velocity_opt *opt = &vptr->options;
@@ -1150,46 +1455,50 @@ static int velocity_init_dma_rings(struct velocity_info *vptr)
return 0;
}
+static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
+{
+ vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+}
+
/**
- * velocity_free_dma_rings - free PCI ring pointers
- * @vptr: Velocity to free from
+ * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * @vptr: velocity
+ * @idx: ring index
*
- * Clean up the PCI ring buffers allocated to this velocity.
+ * Allocate a new full sized buffer for the reception of a frame and
+ * map it into PCI space for the hardware to use. The hardware
+ * requires *64* byte alignment of the buffer which makes life
+ * less fun than would be ideal.
*/
-
-static void velocity_free_dma_rings(struct velocity_info *vptr)
+static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
{
- const int size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
-
- pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
-}
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
-static void velocity_give_many_rx_descs(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
+ rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
+ if (rd_info->skb == NULL)
+ return -ENOMEM;
/*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
+ * Do the gymnastics to get the buffer head for data at
+ * 64byte alignment.
*/
- if (vptr->rx.filled < 4)
- return;
-
- wmb();
+ skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
+ rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+ vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
- unusable = vptr->rx.filled & 0x0003;
- dirty = vptr->rx.dirty - unusable;
- for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
- vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
- }
+ /*
+ * Fill in the descriptor to match
+ */
- writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
- vptr->rx.filled = unusable;
+ *((u32 *) & (rd->rdesc0)) = 0;
+ rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
+ rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+ rd->pa_high = 0;
+ return 0;
}
+
static int velocity_rx_refill(struct velocity_info *vptr)
{
int dirty = vptr->rx.dirty, done = 0;
@@ -1217,42 +1526,6 @@ static int velocity_rx_refill(struct velocity_info *vptr)
return done;
}
-static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
-{
- vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
-}
-
-/**
- * velocity_init_rd_ring - set up receive ring
- * @vptr: velocity to configure
- *
- * Allocate and set up the receive buffers for each ring slot and
- * assign them to the network adapter.
- */
-
-static int velocity_init_rd_ring(struct velocity_info *vptr)
-{
- int ret = -ENOMEM;
-
- vptr->rx.info = kcalloc(vptr->options.numrx,
- sizeof(struct velocity_rd_info), GFP_KERNEL);
- if (!vptr->rx.info)
- goto out;
-
- velocity_init_rx_ring_indexes(vptr);
-
- if (velocity_rx_refill(vptr) != vptr->options.numrx) {
- VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
- "%s: failed to allocate RX buffer.\n", vptr->dev->name);
- velocity_free_rd_ring(vptr);
- goto out;
- }
-
- ret = 0;
-out:
- return ret;
-}
-
/**
* velocity_free_rd_ring - free receive ring
* @vptr: velocity to clean up
@@ -1260,7 +1533,6 @@ out:
* Free the receive buffers for each ring slot and any
* attached socket buffers that need to go away.
*/
-
static void velocity_free_rd_ring(struct velocity_info *vptr)
{
int i;
@@ -1288,6 +1560,38 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
vptr->rx.info = NULL;
}
+
+
+/**
+ * velocity_init_rd_ring - set up receive ring
+ * @vptr: velocity to configure
+ *
+ * Allocate and set up the receive buffers for each ring slot and
+ * assign them to the network adapter.
+ */
+static int velocity_init_rd_ring(struct velocity_info *vptr)
+{
+ int ret = -ENOMEM;
+
+ vptr->rx.info = kcalloc(vptr->options.numrx,
+ sizeof(struct velocity_rd_info), GFP_KERNEL);
+ if (!vptr->rx.info)
+ goto out;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ if (velocity_rx_refill(vptr) != vptr->options.numrx) {
+ VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
+ "%s: failed to allocate RX buffer.\n", vptr->dev->name);
+ velocity_free_rd_ring(vptr);
+ goto out;
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
/**
* velocity_init_td_ring - set up transmit ring
* @vptr: velocity
@@ -1296,7 +1600,6 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
* Returns zero on success or a negative posix errno code for
* failure.
*/
-
static int velocity_init_td_ring(struct velocity_info *vptr)
{
dma_addr_t curr;
@@ -1320,10 +1623,81 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
return 0;
}
+/**
+ * velocity_free_dma_rings - free PCI ring pointers
+ * @vptr: Velocity to free from
+ *
+ * Clean up the PCI ring buffers allocated to this velocity.
+ */
+static void velocity_free_dma_rings(struct velocity_info *vptr)
+{
+ const int size = vptr->options.numrx * sizeof(struct rx_desc) +
+ vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+
+ pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
+}
+
+
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+ int ret;
+
+ velocity_set_rxbufsize(vptr, mtu);
+
+ ret = velocity_init_dma_rings(vptr);
+ if (ret < 0)
+ goto out;
+
+ ret = velocity_init_rd_ring(vptr);
+ if (ret < 0)
+ goto err_free_dma_rings_0;
+
+ ret = velocity_init_td_ring(vptr);
+ if (ret < 0)
+ goto err_free_rd_ring_1;
+out:
+ return ret;
+
+err_free_rd_ring_1:
+ velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+ velocity_free_dma_rings(vptr);
+ goto out;
+}
+
+/**
+ * velocity_free_tx_buf - free transmit buffer
+ * @vptr: velocity
+ * @tdinfo: buffer
+ *
+ * Release an transmit buffer. If the buffer was preallocated then
+ * recycle it, if not then unmap the buffer.
+ */
+static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
+{
+ struct sk_buff *skb = tdinfo->skb;
+ int i;
+ int pktlen;
+
+ /*
+ * Don't unmap the pre-allocated tx_bufs
+ */
+ if (tdinfo->skb_dma) {
+
+ pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
+ for (i = 0; i < tdinfo->nskb_dma; i++) {
+ pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
+ tdinfo->skb_dma[i] = 0;
+ }
+ }
+ dev_kfree_skb_irq(skb);
+ tdinfo->skb = NULL;
+}
+
+
/*
* FIXME: could we merge this with velocity_free_tx_buf ?
*/
-
static void velocity_free_td_ring_entry(struct velocity_info *vptr,
int q, int n)
{
@@ -1353,7 +1727,6 @@ static void velocity_free_td_ring_entry(struct velocity_info *vptr,
* Free up the transmit ring for this particular velocity adapter.
* We free the ring contents but not the ring itself.
*/
-
static void velocity_free_td_ring(struct velocity_info *vptr)
{
int i, j;
@@ -1369,61 +1742,167 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
}
}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+ velocity_free_td_ring(vptr);
+ velocity_free_rd_ring(vptr);
+ velocity_free_dma_rings(vptr);
+}
+
/**
- * velocity_rx_srv - service RX interrupt
+ * velocity_error - handle error from controller
* @vptr: velocity
- * @status: adapter status (unused)
+ * @status: card status
+ *
+ * Process an error report from the hardware and attempt to recover
+ * the card itself. At the moment we cannot recover from some
+ * theoretically impossible errors but this could be fixed using
+ * the pci_device_failed logic to bounce the hardware
*
- * Walk the receive ring of the velocity adapter and remove
- * any received packets from the receive queue. Hand the ring
- * slots back to the adapter for reuse.
*/
-
-static int velocity_rx_srv(struct velocity_info *vptr, int status)
+static void velocity_error(struct velocity_info *vptr, int status)
{
- struct net_device_stats *stats = &vptr->dev->stats;
- int rd_curr = vptr->rx.curr;
- int works = 0;
- do {
- struct rx_desc *rd = vptr->rx.ring + rd_curr;
+ if (status & ISR_TXSTLI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
- if (!vptr->rx.info[rd_curr].skb)
- break;
+ printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(&regs->TDIdx[0]));
+ BYTE_REG_BITS_ON(TXESR_TDSTR, &regs->TXESR);
+ writew(TRDCSR_RUN, &regs->TDCSRClr);
+ netif_stop_queue(vptr->dev);
- if (rd->rdesc0.len & OWNED_BY_NIC)
- break;
+ /* FIXME: port over the pci_device_failed code and use it
+ here */
+ }
- rmb();
+ if (status & ISR_SRCI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int linked;
+
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ vptr->mii_status = check_connection_type(regs);
+ /*
+ * If it is a 3119, disable frame bursting in
+ * halfduplex mode and enable it in fullduplex
+ * mode
+ */
+ if (vptr->rev_id < REV_ID_VT3216_A0) {
+ if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+ else
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+ }
+ /*
+ * Only enable CD heart beat counter in 10HD mode
+ */
+ if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+ }
/*
- * Don't drop CE or RL error frame although RXOK is off
+ * Get link status from PHYSR0
*/
- if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
- if (rd->rdesc0.RSR & RSR_CRC)
- stats->rx_crc_errors++;
- if (rd->rdesc0.RSR & RSR_FAE)
- stats->rx_frame_errors++;
+ linked = readb(&regs->PHYSR0) & PHYSR0_LINKGD;
- stats->rx_dropped++;
+ if (linked) {
+ vptr->mii_status &= ~VELOCITY_LINK_FAIL;
+ netif_carrier_on(vptr->dev);
+ } else {
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ netif_carrier_off(vptr->dev);
}
- rd->size |= RX_INTEN;
+ velocity_print_link_status(vptr);
+ enable_flow_control_ability(vptr);
- rd_curr++;
- if (rd_curr >= vptr->options.numrx)
- rd_curr = 0;
- } while (++works <= 15);
+ /*
+ * Re-enable auto-polling because SRCI will disable
+ * auto-polling
+ */
- vptr->rx.curr = rd_curr;
+ enable_mii_autopoll(regs);
- if ((works > 0) && (velocity_rx_refill(vptr) > 0))
- velocity_give_many_rx_descs(vptr);
+ if (vptr->mii_status & VELOCITY_LINK_FAIL)
+ netif_stop_queue(vptr->dev);
+ else
+ netif_wake_queue(vptr->dev);
- VAR_USED(stats);
+ };
+ if (status & ISR_MIBFI)
+ velocity_update_hw_mibs(vptr);
+ if (status & ISR_LSTEI)
+ mac_rx_queue_wake(vptr->mac_regs);
+}
+
+/**
+ * tx_srv - transmit interrupt service
+ * @vptr; Velocity
+ * @status:
+ *
+ * Scan the queues looking for transmitted packets that
+ * we can complete and clean up. Update any statistics as
+ * necessary/
+ */
+static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+{
+ struct tx_desc *td;
+ int qnum;
+ int full = 0;
+ int idx;
+ int works = 0;
+ struct velocity_td_info *tdinfo;
+ struct net_device_stats *stats = &vptr->dev->stats;
+
+ for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+ for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
+ idx = (idx + 1) % vptr->options.numtx) {
+
+ /*
+ * Get Tx Descriptor
+ */
+ td = &(vptr->tx.rings[qnum][idx]);
+ tdinfo = &(vptr->tx.infos[qnum][idx]);
+
+ if (td->tdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if ((works++ > 15))
+ break;
+
+ if (td->tdesc0.TSR & TSR0_TERR) {
+ stats->tx_errors++;
+ stats->tx_dropped++;
+ if (td->tdesc0.TSR & TSR0_CDH)
+ stats->tx_heartbeat_errors++;
+ if (td->tdesc0.TSR & TSR0_CRS)
+ stats->tx_carrier_errors++;
+ if (td->tdesc0.TSR & TSR0_ABT)
+ stats->tx_aborted_errors++;
+ if (td->tdesc0.TSR & TSR0_OWC)
+ stats->tx_window_errors++;
+ } else {
+ stats->tx_packets++;
+ stats->tx_bytes += tdinfo->skb->len;
+ }
+ velocity_free_tx_buf(vptr, tdinfo);
+ vptr->tx.used[qnum]--;
+ }
+ vptr->tx.tail[qnum] = idx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ full = 1;
+ }
+ /*
+ * Look to see if we should kick the transmit network
+ * layer for more work.
+ */
+ if (netif_queue_stopped(vptr->dev) && (full == 0)
+ && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+ netif_wake_queue(vptr->dev);
+ }
return works;
}
@@ -1435,7 +1914,6 @@ static int velocity_rx_srv(struct velocity_info *vptr, int status)
* Process the status bits for the received packet and determine
* if the checksum was computed and verified by the hardware
*/
-
static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
{
skb->ip_summed = CHECKSUM_NONE;
@@ -1502,6 +1980,7 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
}
}
+
/**
* velocity_receive_frame - received packet processor
* @vptr: velocity we are handling
@@ -1510,7 +1989,6 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
* A packet has arrived. We process the packet and if appropriate
* pass the frame up the network stack
*/
-
static int velocity_receive_frame(struct velocity_info *vptr, int idx)
{
void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
@@ -1572,314 +2050,118 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
return 0;
}
+
/**
- * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * velocity_rx_srv - service RX interrupt
* @vptr: velocity
- * @idx: ring index
+ * @status: adapter status (unused)
*
- * Allocate a new full sized buffer for the reception of a frame and
- * map it into PCI space for the hardware to use. The hardware
- * requires *64* byte alignment of the buffer which makes life
- * less fun than would be ideal.
+ * Walk the receive ring of the velocity adapter and remove
+ * any received packets from the receive queue. Hand the ring
+ * slots back to the adapter for reuse.
*/
-
-static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
+static int velocity_rx_srv(struct velocity_info *vptr, int status)
{
- struct rx_desc *rd = &(vptr->rx.ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
-
- rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
+ struct net_device_stats *stats = &vptr->dev->stats;
+ int rd_curr = vptr->rx.curr;
+ int works = 0;
- /*
- * Do the gymnastics to get the buffer head for data at
- * 64byte alignment.
- */
- skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
- rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
- vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
+ do {
+ struct rx_desc *rd = vptr->rx.ring + rd_curr;
- /*
- * Fill in the descriptor to match
- */
+ if (!vptr->rx.info[rd_curr].skb)
+ break;
- *((u32 *) & (rd->rdesc0)) = 0;
- rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
- rd->pa_high = 0;
- return 0;
-}
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
-/**
- * tx_srv - transmit interrupt service
- * @vptr; Velocity
- * @status:
- *
- * Scan the queues looking for transmitted packets that
- * we can complete and clean up. Update any statistics as
- * necessary/
- */
+ rmb();
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
-{
- struct tx_desc *td;
- int qnum;
- int full = 0;
- int idx;
- int works = 0;
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->dev->stats;
+ /*
+ * Don't drop CE or RL error frame although RXOK is off
+ */
+ if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
+ if (velocity_receive_frame(vptr, rd_curr) < 0)
+ stats->rx_dropped++;
+ } else {
+ if (rd->rdesc0.RSR & RSR_CRC)
+ stats->rx_crc_errors++;
+ if (rd->rdesc0.RSR & RSR_FAE)
+ stats->rx_frame_errors++;
- for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
- for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
+ stats->rx_dropped++;
+ }
- /*
- * Get Tx Descriptor
- */
- td = &(vptr->tx.rings[qnum][idx]);
- tdinfo = &(vptr->tx.infos[qnum][idx]);
+ rd->size |= RX_INTEN;
- if (td->tdesc0.len & OWNED_BY_NIC)
- break;
+ rd_curr++;
+ if (rd_curr >= vptr->options.numrx)
+ rd_curr = 0;
+ } while (++works <= 15);
- if ((works++ > 15))
- break;
+ vptr->rx.curr = rd_curr;
- if (td->tdesc0.TSR & TSR0_TERR) {
- stats->tx_errors++;
- stats->tx_dropped++;
- if (td->tdesc0.TSR & TSR0_CDH)
- stats->tx_heartbeat_errors++;
- if (td->tdesc0.TSR & TSR0_CRS)
- stats->tx_carrier_errors++;
- if (td->tdesc0.TSR & TSR0_ABT)
- stats->tx_aborted_errors++;
- if (td->tdesc0.TSR & TSR0_OWC)
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
- stats->tx_bytes += tdinfo->skb->len;
- }
- velocity_free_tx_buf(vptr, tdinfo);
- vptr->tx.used[qnum]--;
- }
- vptr->tx.tail[qnum] = idx;
+ if ((works > 0) && (velocity_rx_refill(vptr) > 0))
+ velocity_give_many_rx_descs(vptr);
- if (AVAIL_TD(vptr, qnum) < 1)
- full = 1;
- }
- /*
- * Look to see if we should kick the transmit network
- * layer for more work.
- */
- if (netif_queue_stopped(vptr->dev) && (full == 0)
- && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
- netif_wake_queue(vptr->dev);
- }
+ VAR_USED(stats);
return works;
}
-/**
- * velocity_print_link_status - link status reporting
- * @vptr: velocity to report on
- *
- * Turn the link status of the velocity card into a kernel log
- * description of the new link state, detailing speed and duplex
- * status
- */
-
-static void velocity_print_link_status(struct velocity_info *vptr)
-{
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
- } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
- else if (vptr->mii_status & VELOCITY_SPEED_100)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
-
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
- } else {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_100_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
- break;
- case SPD_DPX_100_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
- break;
- case SPD_DPX_10_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
- break;
- case SPD_DPX_10_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
- break;
- default:
- break;
- }
- }
-}
/**
- * velocity_error - handle error from controller
- * @vptr: velocity
- * @status: card status
- *
- * Process an error report from the hardware and attempt to recover
- * the card itself. At the moment we cannot recover from some
- * theoretically impossible errors but this could be fixed using
- * the pci_device_failed logic to bounce the hardware
+ * velocity_intr - interrupt callback
+ * @irq: interrupt number
+ * @dev_instance: interrupting device
*
+ * Called whenever an interrupt is generated by the velocity
+ * adapter IRQ line. We may not be the source of the interrupt
+ * and need to identify initially if we are, and if not exit as
+ * efficiently as possible.
*/
-
-static void velocity_error(struct velocity_info *vptr, int status)
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
{
+ struct net_device *dev = dev_instance;
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 isr_status;
+ int max_count = 0;
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem *regs = vptr->mac_regs;
- printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(&regs->TDIdx[0]));
- BYTE_REG_BITS_ON(TXESR_TDSTR, &regs->TXESR);
- writew(TRDCSR_RUN, &regs->TDCSRClr);
- netif_stop_queue(vptr->dev);
+ spin_lock(&vptr->lock);
+ isr_status = mac_read_isr(vptr->mac_regs);
- /* FIXME: port over the pci_device_failed code and use it
- here */
+ /* Not us ? */
+ if (isr_status == 0) {
+ spin_unlock(&vptr->lock);
+ return IRQ_NONE;
}
- if (status & ISR_SRCI) {
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int linked;
-
- if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- vptr->mii_status = check_connection_type(regs);
-
- /*
- * If it is a 3119, disable frame bursting in
- * halfduplex mode and enable it in fullduplex
- * mode
- */
- if (vptr->rev_id < REV_ID_VT3216_A0) {
- if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
- else
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
- }
- /*
- * Only enable CD heart beat counter in 10HD mode
- */
- if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
- else
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
- }
- /*
- * Get link status from PHYSR0
- */
- linked = readb(&regs->PHYSR0) & PHYSR0_LINKGD;
-
- if (linked) {
- vptr->mii_status &= ~VELOCITY_LINK_FAIL;
- netif_carrier_on(vptr->dev);
- } else {
- vptr->mii_status |= VELOCITY_LINK_FAIL;
- netif_carrier_off(vptr->dev);
- }
-
- velocity_print_link_status(vptr);
- enable_flow_control_ability(vptr);
-
- /*
- * Re-enable auto-polling because SRCI will disable
- * auto-polling
- */
-
- enable_mii_autopoll(regs);
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL)
- netif_stop_queue(vptr->dev);
- else
- netif_wake_queue(vptr->dev);
-
- };
- if (status & ISR_MIBFI)
- velocity_update_hw_mibs(vptr);
- if (status & ISR_LSTEI)
- mac_rx_queue_wake(vptr->mac_regs);
-}
-
-/**
- * velocity_free_tx_buf - free transmit buffer
- * @vptr: velocity
- * @tdinfo: buffer
- *
- * Release an transmit buffer. If the buffer was preallocated then
- * recycle it, if not then unmap the buffer.
- */
-
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
-{
- struct sk_buff *skb = tdinfo->skb;
- int i;
- int pktlen;
+ mac_disable_int(vptr->mac_regs);
/*
- * Don't unmap the pre-allocated tx_bufs
+ * Keep processing the ISR until we have completed
+ * processing and the isr_status becomes zero
*/
- if (tdinfo->skb_dma) {
- pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
- for (i = 0; i < tdinfo->nskb_dma; i++) {
- pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
- tdinfo->skb_dma[i] = 0;
+ while (isr_status != 0) {
+ mac_write_isr(vptr->mac_regs, isr_status);
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+ if (isr_status & (ISR_PRXI | ISR_PPRXI))
+ max_count += velocity_rx_srv(vptr, isr_status);
+ if (isr_status & (ISR_PTXI | ISR_PPTXI))
+ max_count += velocity_tx_srv(vptr, isr_status);
+ isr_status = mac_read_isr(vptr->mac_regs);
+ if (max_count > vptr->options.int_works) {
+ printk(KERN_WARNING "%s: excessive work at interrupt.\n",
+ dev->name);
+ max_count = 0;
}
}
- dev_kfree_skb_irq(skb);
- tdinfo->skb = NULL;
-}
-
-static int velocity_init_rings(struct velocity_info *vptr, int mtu)
-{
- int ret;
-
- velocity_set_rxbufsize(vptr, mtu);
-
- ret = velocity_init_dma_rings(vptr);
- if (ret < 0)
- goto out;
-
- ret = velocity_init_rd_ring(vptr);
- if (ret < 0)
- goto err_free_dma_rings_0;
-
- ret = velocity_init_td_ring(vptr);
- if (ret < 0)
- goto err_free_rd_ring_1;
-out:
- return ret;
+ spin_unlock(&vptr->lock);
+ mac_enable_int(vptr->mac_regs);
+ return IRQ_HANDLED;
-err_free_rd_ring_1:
- velocity_free_rd_ring(vptr);
-err_free_dma_rings_0:
- velocity_free_dma_rings(vptr);
- goto out;
-}
-
-static void velocity_free_rings(struct velocity_info *vptr)
-{
- velocity_free_td_ring(vptr);
- velocity_free_rd_ring(vptr);
- velocity_free_dma_rings(vptr);
}
/**
@@ -1892,7 +2174,6 @@ static void velocity_free_rings(struct velocity_info *vptr)
* All the ring allocation and set up is done on open for this
* adapter to minimise memory usage when inactive
*/
-
static int velocity_open(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -1926,6 +2207,24 @@ out:
}
/**
+ * velocity_shutdown - shut down the chip
+ * @vptr: velocity to deactivate
+ *
+ * Shuts down the internal operations of the velocity and
+ * disables interrupts, autopolling, transmit and receive
+ */
+static void velocity_shutdown(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ mac_disable_int(regs);
+ writel(CR0_STOP, &regs->CR0Set);
+ writew(0xFFFF, &regs->TDCSRClr);
+ writeb(0xFF, &regs->RDCSRClr);
+ safe_disable_mii_autopoll(regs);
+ mac_clear_isr(regs);
+}
+
+/**
* velocity_change_mtu - MTU change callback
* @dev: network device
* @new_mtu: desired MTU
@@ -1934,7 +2233,6 @@ out:
* this interface. It gets called on a change by the network layer.
* Return zero for success or negative posix error code.
*/
-
static int velocity_change_mtu(struct net_device *dev, int new_mtu)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -2008,22 +2306,127 @@ out_0:
}
/**
- * velocity_shutdown - shut down the chip
- * @vptr: velocity to deactivate
+ * velocity_mii_ioctl - MII ioctl handler
+ * @dev: network device
+ * @ifr: the ifreq block for the ioctl
+ * @cmd: the command
*
- * Shuts down the internal operations of the velocity and
- * disables interrupts, autopolling, transmit and receive
+ * Process MII requests made via ioctl from the network layer. These
+ * are used by tools like kudzu to interrogate the link state of the
+ * hardware
*/
-
-static void velocity_shutdown(struct velocity_info *vptr)
+static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
+ struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem *regs = vptr->mac_regs;
- mac_disable_int(regs);
- writel(CR0_STOP, &regs->CR0Set);
- writew(0xFFFF, &regs->TDCSRClr);
- writeb(0xFF, &regs->RDCSRClr);
- safe_disable_mii_autopoll(regs);
- mac_clear_isr(regs);
+ unsigned long flags;
+ struct mii_ioctl_data *miidata = if_mii(ifr);
+ int err;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ miidata->phy_id = readb(&regs->MIIADR) & 0x1f;
+ break;
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
+ return -ETIMEDOUT;
+ break;
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ spin_lock_irqsave(&vptr->lock, flags);
+ err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ check_connection_type(vptr->mac_regs);
+ if (err)
+ return err;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+
+/**
+ * velocity_ioctl - ioctl entry point
+ * @dev: network device
+ * @rq: interface request ioctl
+ * @cmd: command code
+ *
+ * Called when the user issues an ioctl request to the network
+ * device in question. The velocity interface supports MII.
+ */
+static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ /* If we are asked for information and the device is power
+ saving then we need to bring the device back up to talk to it */
+
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D0);
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCSMIIREG: /* Write to MII PHY register. */
+ ret = velocity_mii_ioctl(dev, rq, cmd);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+
+
+ return ret;
+}
+
+/**
+ * velocity_get_status - statistics callback
+ * @dev: network device
+ *
+ * Callback from the network layer to allow driver statistics
+ * to be resynchronized with hardware collected state. In the
+ * case of the velocity we need to pull the MIB counters from
+ * the hardware into the counters before letting the network
+ * layer display them.
+ */
+static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ /* If the hardware is down, don't touch MII */
+ if (!netif_running(dev))
+ return &dev->stats;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+ dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+ dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+
+// unsigned long rx_dropped; /* no space in linux buffers */
+ dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+ /* detailed rx_errors: */
+// unsigned long rx_length_errors;
+// unsigned long rx_over_errors; /* receiver ring buff overflow */
+ dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+// unsigned long rx_frame_errors; /* recv'd frame alignment error */
+// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+// unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+// unsigned long tx_fifo_errors;
+
+ return &dev->stats;
}
/**
@@ -2033,7 +2436,6 @@ static void velocity_shutdown(struct velocity_info *vptr)
* Callback from the network layer when the velocity is being
* deactivated by the network layer
*/
-
static int velocity_close(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -2063,7 +2465,6 @@ static int velocity_close(struct net_device *dev)
* Called by the networ layer to request a packet is queued to
* the velocity. Returns zero on success.
*/
-
static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -2075,7 +2476,6 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
__le16 len;
int index;
-
if (skb_padto(skb, ETH_ZLEN))
goto out;
pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
@@ -2145,780 +2545,533 @@ out:
return NETDEV_TX_OK;
}
+
+static const struct net_device_ops velocity_netdev_ops = {
+ .ndo_open = velocity_open,
+ .ndo_stop = velocity_close,
+ .ndo_start_xmit = velocity_xmit,
+ .ndo_get_stats = velocity_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_multicast_list = velocity_set_multi,
+ .ndo_change_mtu = velocity_change_mtu,
+ .ndo_do_ioctl = velocity_ioctl,
+ .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
+ .ndo_vlan_rx_register = velocity_vlan_rx_register,
+};
+
/**
- * velocity_intr - interrupt callback
- * @irq: interrupt number
- * @dev_instance: interrupting device
+ * velocity_init_info - init private data
+ * @pdev: PCI device
+ * @vptr: Velocity info
+ * @info: Board type
*
- * Called whenever an interrupt is generated by the velocity
- * adapter IRQ line. We may not be the source of the interrupt
- * and need to identify initially if we are, and if not exit as
- * efficiently as possible.
+ * Set up the initial velocity_info struct for the device that has been
+ * discovered.
*/
-
-static irqreturn_t velocity_intr(int irq, void *dev_instance)
+static void __devinit velocity_init_info(struct pci_dev *pdev,
+ struct velocity_info *vptr,
+ const struct velocity_info_tbl *info)
{
- struct net_device *dev = dev_instance;
- struct velocity_info *vptr = netdev_priv(dev);
- u32 isr_status;
- int max_count = 0;
-
-
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
- /* Not us ? */
- if (isr_status == 0) {
- spin_unlock(&vptr->lock);
- return IRQ_NONE;
- }
-
- mac_disable_int(vptr->mac_regs);
-
- /*
- * Keep processing the ISR until we have completed
- * processing and the isr_status becomes zero
- */
-
- while (isr_status != 0) {
- mac_write_isr(vptr->mac_regs, isr_status);
- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
- velocity_error(vptr, isr_status);
- if (isr_status & (ISR_PRXI | ISR_PPRXI))
- max_count += velocity_rx_srv(vptr, isr_status);
- if (isr_status & (ISR_PTXI | ISR_PPTXI))
- max_count += velocity_tx_srv(vptr, isr_status);
- isr_status = mac_read_isr(vptr->mac_regs);
- if (max_count > vptr->options.int_works) {
- printk(KERN_WARNING "%s: excessive work at interrupt.\n",
- dev->name);
- max_count = 0;
- }
- }
- spin_unlock(&vptr->lock);
- mac_enable_int(vptr->mac_regs);
- return IRQ_HANDLED;
+ memset(vptr, 0, sizeof(struct velocity_info));
+ vptr->pdev = pdev;
+ vptr->chip_id = info->chip_id;
+ vptr->tx.numq = info->txqueue;
+ vptr->multicast_limit = MCAM_SIZE;
+ spin_lock_init(&vptr->lock);
+ INIT_LIST_HEAD(&vptr->list);
}
-
/**
- * velocity_set_multi - filter list change callback
- * @dev: network device
+ * velocity_get_pci_info - retrieve PCI info for device
+ * @vptr: velocity device
+ * @pdev: PCI device it matches
*
- * Called by the network layer when the filter lists need to change
- * for a velocity adapter. Reload the CAMs with the new address
- * filter ruleset.
+ * Retrieve the PCI configuration space data that interests us from
+ * the kernel PCI layer
*/
-
-static void velocity_set_multi(struct net_device *dev)
+static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u8 rx_mode;
- int i;
- struct dev_mc_list *mclist;
+ vptr->rev_id = pdev->revision;
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, &regs->MARCAM[0]);
- writel(0xffffffff, &regs->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
- } else if ((dev->mc_count > vptr->multicast_limit)
- || (dev->flags & IFF_ALLMULTI)) {
- writel(0xffffffff, &regs->MARCAM[0]);
- writel(0xffffffff, &regs->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB);
- } else {
- int offset = MCAM_SIZE - vptr->multicast_limit;
- mac_get_cam_mask(regs, vptr->mCAMmask);
+ pci_set_master(pdev);
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
- mac_set_cam(regs, i + offset, mclist->dmi_addr);
- vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
- }
+ vptr->ioaddr = pci_resource_start(pdev, 0);
+ vptr->memaddr = pci_resource_start(pdev, 1);
- mac_set_cam_mask(regs, vptr->mCAMmask);
- rx_mode = RCR_AM | RCR_AB | RCR_AP;
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #0 is not an I/O resource, aborting.\n");
+ return -EINVAL;
}
- if (dev->mtu > 1500)
- rx_mode |= RCR_AL;
- BYTE_REG_BITS_ON(rx_mode, &regs->RCR);
+ if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #1 is an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+ dev_err(&pdev->dev, "region #1 is too small.\n");
+ return -EINVAL;
+ }
+ vptr->pdev = pdev;
+ return 0;
}
/**
- * velocity_get_status - statistics callback
- * @dev: network device
+ * velocity_print_info - per driver data
+ * @vptr: velocity
*
- * Callback from the network layer to allow driver statistics
- * to be resynchronized with hardware collected state. In the
- * case of the velocity we need to pull the MIB counters from
- * the hardware into the counters before letting the network
- * layer display them.
+ * Print per driver data as the kernel driver finds Velocity
+ * hardware
*/
-
-static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+static void __devinit velocity_print_info(struct velocity_info *vptr)
{
- struct velocity_info *vptr = netdev_priv(dev);
-
- /* If the hardware is down, don't touch MII */
- if (!netif_running(dev))
- return &dev->stats;
-
- spin_lock_irq(&vptr->lock);
- velocity_update_hw_mibs(vptr);
- spin_unlock_irq(&vptr->lock);
-
- dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
- dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
- dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
-
-// unsigned long rx_dropped; /* no space in linux buffers */
- dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
- /* detailed rx_errors: */
-// unsigned long rx_length_errors;
-// unsigned long rx_over_errors; /* receiver ring buff overflow */
- dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
-// unsigned long rx_frame_errors; /* recv'd frame alignment error */
-// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
-// unsigned long rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
-// unsigned long tx_fifo_errors;
+ struct net_device *dev = vptr->dev;
- return &dev->stats;
+ printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
+ printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
-
-/**
- * velocity_ioctl - ioctl entry point
- * @dev: network device
- * @rq: interface request ioctl
- * @cmd: command code
- *
- * Called when the user issues an ioctl request to the network
- * device in question. The velocity interface supports MII.
- */
-
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static u32 velocity_get_link(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D0);
-
- switch (cmd) {
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- case SIOCGMIIREG: /* Read MII PHY register. */
- case SIOCSMIIREG: /* Write to MII PHY register. */
- ret = velocity_mii_ioctl(dev, rq, cmd);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
-
- return ret;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
}
-/*
- * Definition for our device driver. The PCI layer interface
- * uses this to handle all our card discover and plugging
- */
-
-static struct pci_driver velocity_driver = {
- .name = VELOCITY_NAME,
- .id_table = velocity_id_table,
- .probe = velocity_found1,
- .remove = __devexit_p(velocity_remove1),
-#ifdef CONFIG_PM
- .suspend = velocity_suspend,
- .resume = velocity_resume,
-#endif
-};
/**
- * velocity_init_module - load time function
+ * velocity_found1 - set up discovered velocity card
+ * @pdev: PCI device
+ * @ent: PCI device table entry that matched
*
- * Called when the velocity module is loaded. The PCI driver
- * is registered with the PCI layer, and in turn will call
- * the probe functions for each velocity adapter installed
- * in the system.
+ * Configure a discovered adapter from scratch. Return a negative
+ * errno error code on failure paths.
*/
-
-static int __init velocity_init_module(void)
+static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- int ret;
+ static int first = 1;
+ struct net_device *dev;
+ int i;
+ const char *drv_string;
+ const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
+ struct velocity_info *vptr;
+ struct mac_regs __iomem *regs;
+ int ret = -ENOMEM;
- velocity_register_notifier();
- ret = pci_register_driver(&velocity_driver);
- if (ret < 0)
- velocity_unregister_notifier();
- return ret;
-}
+ /* FIXME: this driver, like almost all other ethernet drivers,
+ * can support more than MAX_UNITS.
+ */
+ if (velocity_nics >= MAX_UNITS) {
+ dev_notice(&pdev->dev, "already found %d NICs.\n",
+ velocity_nics);
+ return -ENODEV;
+ }
-/**
- * velocity_cleanup - module unload
- *
- * When the velocity hardware is unloaded this function is called.
- * It will clean up the notifiers and the unregister the PCI
- * driver interface for this hardware. This in turn cleans up
- * all discovered interfaces before returning from the function
- */
+ dev = alloc_etherdev(sizeof(struct velocity_info));
+ if (!dev) {
+ dev_err(&pdev->dev, "allocate net device failed.\n");
+ goto out;
+ }
-static void __exit velocity_cleanup_module(void)
-{
- velocity_unregister_notifier();
- pci_unregister_driver(&velocity_driver);
-}
+ /* Chain it all together */
-module_init(velocity_init_module);
-module_exit(velocity_cleanup_module);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ vptr = netdev_priv(dev);
-/*
- * MII access , media link mode setting functions
- */
+ if (first) {
+ printk(KERN_INFO "%s Ver. %s\n",
+ VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+ printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+ printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
+ first = 0;
+ }
+ velocity_init_info(pdev, vptr, info);
-/**
- * mii_init - set up MII
- * @vptr: velocity adapter
- * @mii_status: links tatus
- *
- * Set up the PHY for the current link state.
- */
+ vptr->dev = dev;
-static void mii_init(struct velocity_info *vptr, u32 mii_status)
-{
- u16 BMCR;
+ dev->irq = pdev->irq;
- switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
- case PHYID_CICADA_CS8201:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue.
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- /*
- * Turn on Link/Activity LED enable bit for CIS8201
- */
- MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
- break;
- case PHYID_VT3216_32BIT:
- case PHYID_VT3216_64BIT:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- break;
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto err_free_dev;
- case PHYID_MARVELL_1000:
- case PHYID_MARVELL_1000S:
- /*
- * Assert CRS on Transmit
- */
- MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- break;
- default:
- ;
- }
- velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
- if (BMCR & BMCR_ISO) {
- BMCR &= ~BMCR_ISO;
- velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
+ ret = velocity_get_pci_info(vptr, pdev);
+ if (ret < 0) {
+ /* error message already printed */
+ goto err_disable;
}
-}
-/**
- * safe_disable_mii_autopoll - autopoll off
- * @regs: velocity registers
- *
- * Turn off the autopoll and wait for it to disable on the chip
- */
-
-static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
-{
- u16 ww;
-
- /* turn off MAUTO */
- writeb(0, &regs->MIICR);
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
- break;
+ ret = pci_request_regions(pdev, VELOCITY_NAME);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "No PCI resources.\n");
+ goto err_disable;
}
-}
-/**
- * enable_mii_autopoll - turn on autopolling
- * @regs: velocity registers
- *
- * Enable the MII link status autopoll feature on the Velocity
- * hardware. Wait for it to enable.
- */
-
-static void enable_mii_autopoll(struct mac_regs __iomem *regs)
-{
- int ii;
+ regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
+ if (regs == NULL) {
+ ret = -EIO;
+ goto err_release_res;
+ }
- writeb(0, &(regs->MIICR));
- writeb(MIIADR_SWMPL, &regs->MIIADR);
+ vptr->mac_regs = regs;
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
- break;
- }
+ mac_wol_reset(regs);
- writeb(MIICR_MAUTO, &regs->MIICR);
+ dev->base_addr = vptr->ioaddr;
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
- break;
- }
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = readb(&regs->PAR[i]);
-}
-/**
- * velocity_mii_read - read MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: buffer for received data
- *
- * Perform a single read of an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
+ drv_string = dev_driver_string(&pdev->dev);
-static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
-{
- u16 ww;
+ velocity_get_options(&vptr->options, velocity_nics, drv_string);
/*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
+ * Mask out the options cannot be set to the chip
*/
- safe_disable_mii_autopoll(regs);
-
- writeb(index, &regs->MIIADR);
- BYTE_REG_BITS_ON(MIICR_RCMD, &regs->MIICR);
+ vptr->options.flags &= info->flags;
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- if (!(readb(&regs->MIICR) & MIICR_RCMD))
- break;
- }
+ /*
+ * Enable the chip specified capbilities
+ */
- *data = readw(&regs->MIIDATA);
+ vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
- enable_mii_autopoll(regs);
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
+ vptr->wol_opts = vptr->options.wol_opts;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
-/**
- * velocity_mii_write - write MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: 16bit data for the MII register
- *
- * Perform a single write to an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
+ vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
-static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
-{
- u16 ww;
+ dev->irq = pdev->irq;
+ dev->netdev_ops = &velocity_netdev_ops;
+ dev->ethtool_ops = &velocity_ethtool_ops;
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
- safe_disable_mii_autopoll(regs);
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
+ NETIF_F_HW_VLAN_RX;
- /* MII reg offset */
- writeb(mii_addr, &regs->MIIADR);
- /* set MII data */
- writew(data, &regs->MIIDATA);
+ if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
+ dev->features |= NETIF_F_IP_CSUM;
- /* turn on MIICR_WCMD */
- BYTE_REG_BITS_ON(MIICR_WCMD, &regs->MIICR);
+ ret = register_netdev(dev);
+ if (ret < 0)
+ goto err_iounmap;
- /* W_MAX_TIMEOUT is the timeout period */
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(5);
- if (!(readb(&regs->MIICR) & MIICR_WCMD))
- break;
+ if (!velocity_get_link(dev)) {
+ netif_carrier_off(dev);
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
}
- enable_mii_autopoll(regs);
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
+ velocity_print_info(vptr);
+ pci_set_drvdata(pdev, dev);
-/**
- * velocity_get_opt_media_mode - get media selection
- * @vptr: velocity adapter
- *
- * Get the media mode stored in EEPROM or module options and load
- * mii_status accordingly. The requested link state information
- * is also returned.
- */
+ /* and leave the chip powered down */
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
-{
- u32 status = 0;
+ pci_set_power_state(pdev, PCI_D3hot);
+#ifdef CONFIG_PM
+ {
+ unsigned long flags;
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_AUTO:
- status = VELOCITY_AUTONEG_ENABLE;
- break;
- case SPD_DPX_100_FULL:
- status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_10_FULL:
- status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_100_HALF:
- status = VELOCITY_SPEED_100;
- break;
- case SPD_DPX_10_HALF:
- status = VELOCITY_SPEED_10;
- break;
+ spin_lock_irqsave(&velocity_dev_list_lock, flags);
+ list_add(&vptr->list, &velocity_dev_list);
+ spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
}
- vptr->mii_status = status;
- return status;
-}
-
-/**
- * mii_set_auto_on - autonegotiate on
- * @vptr: velocity
- *
- * Enable autonegotation on this interface
- */
+#endif
+ velocity_nics++;
+out:
+ return ret;
-static void mii_set_auto_on(struct velocity_info *vptr)
-{
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
- else
- MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
+err_iounmap:
+ iounmap(regs);
+err_release_res:
+ pci_release_regions(pdev);
+err_disable:
+ pci_disable_device(pdev);
+err_free_dev:
+ free_netdev(dev);
+ goto out;
}
-/*
-static void mii_set_auto_off(struct velocity_info *vptr)
-{
- MII_REG_BITS_OFF(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
-}
-*/
-
+#ifdef CONFIG_PM
/**
- * set_mii_flow_control - flow control setup
- * @vptr: velocity interface
+ * wol_calc_crc - WOL CRC
+ * @pattern: data pattern
+ * @mask_pattern: mask
*
- * Set up the flow control on this interface according to
- * the supplied user/eeprom options.
+ * Compute the wake on lan crc hashes for the packet header
+ * we are interested in.
*/
-
-static void set_mii_flow_control(struct velocity_info *vptr)
+static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
{
- /*Enable or Disable PAUSE in ANAR */
- switch (vptr->options.flow_cntl) {
- case FLOW_CNTL_TX:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
+ u16 crc = 0xFFFF;
+ u8 mask;
+ int i, j;
- case FLOW_CNTL_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
+ for (i = 0; i < size; i++) {
+ mask = mask_pattern[i];
- case FLOW_CNTL_TX_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
+ /* Skip this loop if the mask equals to zero */
+ if (mask == 0x00)
+ continue;
- case FLOW_CNTL_DISABLE:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
- default:
- break;
+ for (j = 0; j < 8; j++) {
+ if ((mask & 0x01) == 0) {
+ mask >>= 1;
+ continue;
+ }
+ mask >>= 1;
+ crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
+ }
}
+ /* Finally, invert the result once to get the correct data */
+ crc = ~crc;
+ return bitrev32(crc) >> 16;
}
/**
- * velocity_set_media_mode - set media mode
- * @mii_status: old MII link state
+ * velocity_set_wol - set up for wake on lan
+ * @vptr: velocity to set WOL status on
*
- * Check the media link state and configure the flow control
- * PHY and also velocity hardware setup accordingly. In particular
- * we need to set up CD polling and frame bursting.
+ * Set a card up for wake on lan either by unicast or by
+ * ARP packet.
+ *
+ * FIXME: check static buffer is safe here
*/
-
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+static int velocity_set_wol(struct velocity_info *vptr)
{
- u32 curr_status;
struct mac_regs __iomem *regs = vptr->mac_regs;
+ static u8 buf[256];
+ int i;
- vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
- curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+ static u32 mask_pattern[2][4] = {
+ {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
+ {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
+ };
- /* Set mii link status */
- set_mii_flow_control(vptr);
+ writew(0xFFFF, &regs->WOLCRClr);
+ writeb(WOLCFG_SAB | WOLCFG_SAM, &regs->WOLCFGSet);
+ writew(WOLCR_MAGIC_EN, &regs->WOLCRSet);
/*
- Check if new status is consisent with current status
- if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
- || (mii_status==curr_status)) {
- vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
- vptr->mii_status=check_connection_type(vptr->mac_regs);
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
- return 0;
- }
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), &regs->WOLCRSet);
*/
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ writew(WOLCR_UNICAST_EN, &regs->WOLCRSet);
- /*
- * If connection type is AUTO
- */
- if (mii_status & VELOCITY_AUTONEG_ENABLE) {
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
- /* clear force MAC mode bit */
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
- /* set duplex mode of MAC according to duplex mode of MII */
- MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
- MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
+ if (vptr->wol_opts & VELOCITY_WOL_ARP) {
+ struct arp_packet *arp = (struct arp_packet *) buf;
+ u16 crc;
+ memset(buf, 0, sizeof(struct arp_packet) + 7);
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- } else {
- u16 ANAR;
- u8 CHIPGCR;
+ for (i = 0; i < 4; i++)
+ writel(mask_pattern[0][i], &regs->ByteMask[0][i]);
- /*
- * 1. if it's 3119, disable frame bursting in halfduplex mode
- * and enable it in fullduplex mode
- * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
- * 3. only enable CD heart beat counter in 10HD mode
- */
+ arp->type = htons(ETH_P_ARP);
+ arp->ar_op = htons(1);
- /* set force MAC mode bit */
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+ memcpy(arp->ar_tip, vptr->ip_addr, 4);
- CHIPGCR = readb(&regs->CHIPGCR);
- CHIPGCR &= ~CHIPGCR_FCGMII;
+ crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
+ (u8 *) & mask_pattern[0][0]);
- if (mii_status & VELOCITY_DUPLEX_FULL) {
- CHIPGCR |= CHIPGCR_FCFDX;
- writeb(CHIPGCR, &regs->CHIPGCR);
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
- } else {
- CHIPGCR &= ~CHIPGCR_FCFDX;
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
- writeb(CHIPGCR, &regs->CHIPGCR);
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
- }
+ writew(crc, &regs->PatternCRC[0]);
+ writew(WOLCR_ARP_EN, &regs->WOLCRSet);
+ }
+
+ BYTE_REG_BITS_ON(PWCFG_WOLTYPE, &regs->PWCFGSet);
+ BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, &regs->PWCFGSet);
+
+ writew(0x0FFF, &regs->WOLSRClr);
+
+ if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+ }
- if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
- else
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
- /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
- velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
- ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
- if (mii_status & VELOCITY_SPEED_100) {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_TXFD;
- else
- ANAR |= ANAR_TX;
- } else {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_10FD;
- else
- ANAR |= ANAR_10;
- }
- velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+ {
+ u8 GCR;
+ GCR = readb(&regs->CHIPGCR);
+ GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
+ writeb(GCR, &regs->CHIPGCR);
}
- /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
- /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
- return VELOCITY_LINK_CHANGE;
+
+ BYTE_REG_BITS_OFF(ISR_PWEI, &regs->ISR);
+ /* Turn on SWPTAG just before entering power mode */
+ BYTE_REG_BITS_ON(STICKHW_SWPTAG, &regs->STICKHW);
+ /* Go to bed ..... */
+ BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+ return 0;
}
/**
- * mii_check_media_mode - check media state
- * @regs: velocity registers
+ * velocity_save_context - save registers
+ * @vptr: velocity
+ * @context: buffer for stored context
*
- * Check the current MII status and determine the link status
- * accordingly
+ * Retrieve the current configuration from the velocity hardware
+ * and stash it in the context structure, for use by the context
+ * restore functions. This allows us to save things we need across
+ * power down states
*/
-
-static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
{
- u32 status = 0;
- u16 ANAR;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
- if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
- status |= VELOCITY_LINK_FAIL;
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
- if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
- else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
- status |= (VELOCITY_SPEED_1000);
- else {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if (ANAR & ANAR_TXFD)
- status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
- else if (ANAR & ANAR_TX)
- status |= VELOCITY_SPEED_100;
- else if (ANAR & ANAR_10FD)
- status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
- else
- status |= (VELOCITY_SPEED_10);
- }
+ for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
- }
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
- return status;
}
-static u32 check_connection_type(struct mac_regs __iomem *regs)
+static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
{
- u32 status = 0;
- u8 PHYSR0;
- u16 ANAR;
- PHYSR0 = readb(&regs->PHYSR0);
-
- /*
- if (!(PHYSR0 & PHYSR0_LINKGD))
- status|=VELOCITY_LINK_FAIL;
- */
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+ unsigned long flags;
- if (PHYSR0 & PHYSR0_FDPX)
- status |= VELOCITY_DUPLEX_FULL;
+ if (!netif_running(vptr->dev))
+ return 0;
- if (PHYSR0 & PHYSR0_SPDG)
- status |= VELOCITY_SPEED_1000;
- else if (PHYSR0 & PHYSR0_SPD10)
- status |= VELOCITY_SPEED_10;
- else
- status |= VELOCITY_SPEED_100;
+ netif_device_detach(vptr->dev);
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
+ spin_lock_irqsave(&vptr->lock, flags);
+ pci_save_state(pdev);
+#ifdef ETHTOOL_GWOL
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
+ velocity_get_ip(vptr);
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ velocity_set_wol(vptr);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_set_power_state(pdev, PCI_D3hot);
+ } else {
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
-
- return status;
+#else
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#endif
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ return 0;
}
/**
- * enable_flow_control_ability - flow control
- * @vptr: veloity to configure
+ * velocity_restore_context - restore registers
+ * @vptr: velocity
+ * @context: buffer for stored context
*
- * Set up flow control according to the flow control options
- * determined by the eeprom/configuration.
+ * Reload the register configuration from the velocity context
+ * created by velocity_save_context.
*/
-
-static void enable_flow_control_ability(struct velocity_info *vptr)
+static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
{
-
struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
- switch (vptr->options.flow_cntl) {
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- case FLOW_CNTL_DEFAULT:
- if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, &regs->PHYSR0))
- writel(CR0_FDXRFCEN, &regs->CR0Set);
- else
- writel(CR0_FDXRFCEN, &regs->CR0Clr);
+ /* Just skip cr0 */
+ for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
+ /* Clear */
+ writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
+ /* Set */
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+ }
- if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, &regs->PHYSR0))
- writel(CR0_FDXTFCEN, &regs->CR0Set);
- else
- writel(CR0_FDXTFCEN, &regs->CR0Clr);
- break;
+ for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- case FLOW_CNTL_TX:
- writel(CR0_FDXTFCEN, &regs->CR0Set);
- writel(CR0_FDXRFCEN, &regs->CR0Clr);
- break;
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- case FLOW_CNTL_RX:
- writel(CR0_FDXRFCEN, &regs->CR0Set);
- writel(CR0_FDXTFCEN, &regs->CR0Clr);
- break;
+ for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+}
- case FLOW_CNTL_TX_RX:
- writel(CR0_FDXTFCEN, &regs->CR0Set);
- writel(CR0_FDXRFCEN, &regs->CR0Set);
- break;
+static int velocity_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+ unsigned long flags;
+ int i;
- case FLOW_CNTL_DISABLE:
- writel(CR0_FDXRFCEN, &regs->CR0Clr);
- writel(CR0_FDXTFCEN, &regs->CR0Clr);
- break;
+ if (!netif_running(vptr->dev))
+ return 0;
- default:
- break;
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, 0, 0);
+ pci_restore_state(pdev);
+
+ mac_wol_reset(vptr->mac_regs);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ velocity_restore_context(vptr, &vptr->context);
+ velocity_init_registers(vptr, VELOCITY_INIT_WOL);
+ mac_disable_int(vptr->mac_regs);
+
+ velocity_tx_srv(vptr, 0);
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ if (vptr->tx.used[i])
+ mac_tx_queue_wake(vptr->mac_regs, i);
}
+ mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ netif_device_attach(vptr->dev);
+
+ return 0;
}
+#endif
+
+/*
+ * Definition for our device driver. The PCI layer interface
+ * uses this to handle all our card discover and plugging
+ */
+static struct pci_driver velocity_driver = {
+ .name = VELOCITY_NAME,
+ .id_table = velocity_id_table,
+ .probe = velocity_found1,
+ .remove = __devexit_p(velocity_remove1),
+#ifdef CONFIG_PM
+ .suspend = velocity_suspend,
+ .resume = velocity_resume,
+#endif
+};
/**
@@ -2928,7 +3081,6 @@ static void enable_flow_control_ability(struct velocity_info *vptr)
* Called before an ethtool operation. We need to make sure the
* chip is out of D3 state before we poke at it.
*/
-
static int velocity_ethtool_up(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -2944,7 +3096,6 @@ static int velocity_ethtool_up(struct net_device *dev)
* Called after an ethtool operation. Restore the chip back to D3
* state if it isn't running.
*/
-
static void velocity_ethtool_down(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -3009,13 +3160,6 @@ static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd
return ret;
}
-static u32 velocity_get_link(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
-}
-
static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -3094,331 +3238,86 @@ static const struct ethtool_ops velocity_ethtool_ops = {
.complete = velocity_ethtool_down
};
-/**
- * velocity_mii_ioctl - MII ioctl handler
- * @dev: network device
- * @ifr: the ifreq block for the ioctl
- * @cmd: the command
- *
- * Process MII requests made via ioctl from the network layer. These
- * are used by tools like kudzu to interrogate the link state of the
- * hardware
- */
-
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+#ifdef CONFIG_PM
+#ifdef CONFIG_INET
+static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
+ struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
+ struct net_device *dev = ifa->ifa_dev->dev;
+ struct velocity_info *vptr;
unsigned long flags;
- struct mii_ioctl_data *miidata = if_mii(ifr);
- int err;
- switch (cmd) {
- case SIOCGMIIPHY:
- miidata->phy_id = readb(&regs->MIIADR) & 0x1f;
- break;
- case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
- return -ETIMEDOUT;
- break;
- case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- spin_lock_irqsave(&vptr->lock, flags);
- err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
- spin_unlock_irqrestore(&vptr->lock, flags);
- check_connection_type(vptr->mac_regs);
- if (err)
- return err;
- break;
- default:
- return -EOPNOTSUPP;
+ if (dev_net(dev) != &init_net)
+ return NOTIFY_DONE;
+
+ spin_lock_irqsave(&velocity_dev_list_lock, flags);
+ list_for_each_entry(vptr, &velocity_dev_list, list) {
+ if (vptr->dev == dev) {
+ velocity_get_ip(vptr);
+ break;
+ }
}
- return 0;
-}
+ spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-#ifdef CONFIG_PM
+ return NOTIFY_DONE;
+}
+#endif /* CONFIG_INET */
+#endif /* CONFIG_PM */
-/**
- * velocity_save_context - save registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Retrieve the current configuration from the velocity hardware
- * and stash it in the context structure, for use by the context
- * restore functions. This allows us to save things we need across
- * power down states
- */
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+static struct notifier_block velocity_inetaddr_notifier = {
+ .notifier_call = velocity_netdev_event,
+};
-static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
+static void velocity_register_notifier(void)
{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u16 i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
+ register_inetaddr_notifier(&velocity_inetaddr_notifier);
}
-/**
- * velocity_restore_context - restore registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Reload the register configuration from the velocity context
- * created by velocity_save_context.
- */
-
-static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
+static void velocity_unregister_notifier(void)
{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
-
- /* Just skip cr0 */
- for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
- /* Clear */
- writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
- /* Set */
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
- }
+ unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
- for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+#else
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+#define velocity_register_notifier() do {} while (0)
+#define velocity_unregister_notifier() do {} while (0)
- for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
-}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
/**
- * wol_calc_crc - WOL CRC
- * @pattern: data pattern
- * @mask_pattern: mask
+ * velocity_init_module - load time function
*
- * Compute the wake on lan crc hashes for the packet header
- * we are interested in.
+ * Called when the velocity module is loaded. The PCI driver
+ * is registered with the PCI layer, and in turn will call
+ * the probe functions for each velocity adapter installed
+ * in the system.
*/
-
-static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
+static int __init velocity_init_module(void)
{
- u16 crc = 0xFFFF;
- u8 mask;
- int i, j;
-
- for (i = 0; i < size; i++) {
- mask = mask_pattern[i];
-
- /* Skip this loop if the mask equals to zero */
- if (mask == 0x00)
- continue;
+ int ret;
- for (j = 0; j < 8; j++) {
- if ((mask & 0x01) == 0) {
- mask >>= 1;
- continue;
- }
- mask >>= 1;
- crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
- }
- }
- /* Finally, invert the result once to get the correct data */
- crc = ~crc;
- return bitrev32(crc) >> 16;
+ velocity_register_notifier();
+ ret = pci_register_driver(&velocity_driver);
+ if (ret < 0)
+ velocity_unregister_notifier();
+ return ret;
}
/**
- * velocity_set_wol - set up for wake on lan
- * @vptr: velocity to set WOL status on
- *
- * Set a card up for wake on lan either by unicast or by
- * ARP packet.
+ * velocity_cleanup - module unload
*
- * FIXME: check static buffer is safe here
+ * When the velocity hardware is unloaded this function is called.
+ * It will clean up the notifiers and the unregister the PCI
+ * driver interface for this hardware. This in turn cleans up
+ * all discovered interfaces before returning from the function
*/
-
-static int velocity_set_wol(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- static u8 buf[256];
- int i;
-
- static u32 mask_pattern[2][4] = {
- {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
- {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
- };
-
- writew(0xFFFF, &regs->WOLCRClr);
- writeb(WOLCFG_SAB | WOLCFG_SAM, &regs->WOLCFGSet);
- writew(WOLCR_MAGIC_EN, &regs->WOLCRSet);
-
- /*
- if (vptr->wol_opts & VELOCITY_WOL_PHY)
- writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), &regs->WOLCRSet);
- */
-
- if (vptr->wol_opts & VELOCITY_WOL_UCAST)
- writew(WOLCR_UNICAST_EN, &regs->WOLCRSet);
-
- if (vptr->wol_opts & VELOCITY_WOL_ARP) {
- struct arp_packet *arp = (struct arp_packet *) buf;
- u16 crc;
- memset(buf, 0, sizeof(struct arp_packet) + 7);
-
- for (i = 0; i < 4; i++)
- writel(mask_pattern[0][i], &regs->ByteMask[0][i]);
-
- arp->type = htons(ETH_P_ARP);
- arp->ar_op = htons(1);
-
- memcpy(arp->ar_tip, vptr->ip_addr, 4);
-
- crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
- (u8 *) & mask_pattern[0][0]);
-
- writew(crc, &regs->PatternCRC[0]);
- writew(WOLCR_ARP_EN, &regs->WOLCRSet);
- }
-
- BYTE_REG_BITS_ON(PWCFG_WOLTYPE, &regs->PWCFGSet);
- BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, &regs->PWCFGSet);
-
- writew(0x0FFF, &regs->WOLSRClr);
-
- if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
-
- MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
- }
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
-
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
-
- {
- u8 GCR;
- GCR = readb(&regs->CHIPGCR);
- GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
- writeb(GCR, &regs->CHIPGCR);
- }
-
- BYTE_REG_BITS_OFF(ISR_PWEI, &regs->ISR);
- /* Turn on SWPTAG just before entering power mode */
- BYTE_REG_BITS_ON(STICKHW_SWPTAG, &regs->STICKHW);
- /* Go to bed ..... */
- BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
-
- return 0;
-}
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
-
- if (!netif_running(vptr->dev))
- return 0;
-
- netif_device_detach(vptr->dev);
-
- spin_lock_irqsave(&vptr->lock, flags);
- pci_save_state(pdev);
-#ifdef ETHTOOL_GWOL
- if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
- velocity_get_ip(vptr);
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- velocity_set_wol(vptr);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_set_power_state(pdev, PCI_D3hot);
- } else {
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- }
-#else
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-#endif
- spin_unlock_irqrestore(&vptr->lock, flags);
- return 0;
-}
-
-static int velocity_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
- int i;
-
- if (!netif_running(vptr->dev))
- return 0;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, 0, 0);
- pci_restore_state(pdev);
-
- mac_wol_reset(vptr->mac_regs);
-
- spin_lock_irqsave(&vptr->lock, flags);
- velocity_restore_context(vptr, &vptr->context);
- velocity_init_registers(vptr, VELOCITY_INIT_WOL);
- mac_disable_int(vptr->mac_regs);
-
- velocity_tx_srv(vptr, 0);
-
- for (i = 0; i < vptr->tx.numq; i++) {
- if (vptr->tx.used[i])
- mac_tx_queue_wake(vptr->mac_regs, i);
- }
-
- mac_enable_int(vptr->mac_regs);
- spin_unlock_irqrestore(&vptr->lock, flags);
- netif_device_attach(vptr->dev);
-
- return 0;
-}
-
-#ifdef CONFIG_INET
-
-static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
+static void __exit velocity_cleanup_module(void)
{
- struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
- struct net_device *dev = ifa->ifa_dev->dev;
- struct velocity_info *vptr;
- unsigned long flags;
-
- if (dev_net(dev) != &init_net)
- return NOTIFY_DONE;
-
- spin_lock_irqsave(&velocity_dev_list_lock, flags);
- list_for_each_entry(vptr, &velocity_dev_list, list) {
- if (vptr->dev == dev) {
- velocity_get_ip(vptr);
- break;
- }
- }
- spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-
- return NOTIFY_DONE;
+ velocity_unregister_notifier();
+ pci_unregister_driver(&velocity_driver);
}
-#endif
-#endif
+module_init(velocity_init_module);
+module_exit(velocity_cleanup_module);