summaryrefslogtreecommitdiff
path: root/include/media
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2022-10-06 17:15:30 +0200
committerArnd Bergmann <arnd@arndb.de>2023-01-12 10:53:12 +0100
commiteeee6973935357c96715deb3829058dbea8803f0 (patch)
tree8f350f0548fbb472a787e93699131aa976b469a9 /include/media
parent582603a957343430cc519539d5dcaa0a0bb1327a (diff)
downloadlinux-eeee6973935357c96715deb3829058dbea8803f0.tar.gz
media: davinci: remove vpbe support
The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'include/media')
-rw-r--r--include/media/davinci/vpbe.h184
-rw-r--r--include/media/davinci/vpbe_display.h122
-rw-r--r--include/media/davinci/vpbe_osd.h382
-rw-r--r--include/media/davinci/vpbe_types.h74
-rw-r--r--include/media/davinci/vpbe_venc.h37
-rw-r--r--include/media/davinci/vpss.h111
6 files changed, 0 insertions, 910 deletions
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
deleted file mode 100644
index 646c4b48b29d..000000000000
--- a/include/media/davinci/vpbe.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_H
-#define _VPBE_H
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-
-#include <media/v4l2-dev.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_osd.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe_types.h>
-
-/* OSD configuration info */
-struct osd_config_info {
- char module_name[32];
-};
-
-struct vpbe_output {
- struct v4l2_output output;
- /*
- * If output capabilities include dv_timings, list supported timings
- * below
- */
- char *subdev_name;
- /*
- * default_mode identifies the default timings set at the venc or
- * external encoder.
- */
- char *default_mode;
- /*
- * Fields below are used for supporting multiple modes. For example,
- * LCD panel might support different modes and they are listed here.
- * Similarly for supporting external encoders, lcd controller port
- * requires a set of non-standard timing values to be listed here for
- * each supported mode since venc is used in non-standard timing mode
- * for interfacing with external encoder similar to configuring lcd
- * panel timings
- */
- unsigned int num_modes;
- struct vpbe_enc_mode_info *modes;
- /*
- * Bus configuration goes here for external encoders. Some encoders
- * may require multiple interface types for each of the output. For
- * example, SD modes would use YCC8 where as HD mode would use YCC16.
- * Not sure if this is needed on a per mode basis instead of per
- * output basis. If per mode is needed, we may have to move this to
- * mode_info structure
- */
- u32 if_params;
-};
-
-/* encoder configuration info */
-struct encoder_config_info {
- char module_name[32];
- /* Is this an i2c device ? */
- unsigned int is_i2c:1;
- /* i2c subdevice board info */
- struct i2c_board_info board_info;
-};
-
-/*amplifier configuration info */
-struct amp_config_info {
- char module_name[32];
- /* Is this an i2c device ? */
- unsigned int is_i2c:1;
- /* i2c subdevice board info */
- struct i2c_board_info board_info;
-};
-
-/* structure for defining vpbe display subsystem components */
-struct vpbe_config {
- char module_name[32];
- /* i2c bus adapter no */
- int i2c_adapter_id;
- struct osd_config_info osd;
- struct encoder_config_info venc;
- /* external encoder information goes here */
- int num_ext_encoders;
- struct encoder_config_info *ext_encoders;
- /* amplifier information goes here */
- struct amp_config_info *amp;
- unsigned int num_outputs;
- /* Order is venc outputs followed by LCD and then external encoders */
- struct vpbe_output *outputs;
-};
-
-struct vpbe_device;
-
-struct vpbe_device_ops {
- /* Enumerate the outputs */
- int (*enum_outputs)(struct vpbe_device *vpbe_dev,
- struct v4l2_output *output);
-
- /* Set output to the given index */
- int (*set_output)(struct vpbe_device *vpbe_dev,
- int index);
-
- /* Get current output */
- unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
-
- /* Set DV preset at current output */
- int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
- struct v4l2_dv_timings *dv_timings);
-
- /* Get DV presets supported at the output */
- int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
- struct v4l2_dv_timings *dv_timings);
-
- /* Enumerate the DV Presets supported at the output */
- int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
- struct v4l2_enum_dv_timings *timings_info);
-
- /* Set std at the output */
- int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
-
- /* Get the current std at the output */
- int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
-
- /* initialize the device */
- int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
- /* De-initialize the device */
- void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
- /* Get the current mode info */
- int (*get_mode_info)(struct vpbe_device *vpbe_dev,
- struct vpbe_enc_mode_info*);
-
- /*
- * Set the current mode in the encoder. Alternate way of setting
- * standard or DV preset or custom timings in the encoder
- */
- int (*set_mode)(struct vpbe_device *vpbe_dev,
- struct vpbe_enc_mode_info*);
- /* Power management operations */
- int (*suspend)(struct vpbe_device *vpbe_dev);
- int (*resume)(struct vpbe_device *vpbe_dev);
-};
-
-/* struct for vpbe device */
-struct vpbe_device {
- /* V4l2 device */
- struct v4l2_device v4l2_dev;
- /* vpbe dispay controller cfg */
- struct vpbe_config *cfg;
- /* parent device */
- struct device *pdev;
- /* external encoder v4l2 sub devices */
- struct v4l2_subdev **encoders;
- /* current encoder index */
- int current_sd_index;
- /* external amplifier v4l2 subdevice */
- struct v4l2_subdev *amp;
- struct mutex lock;
- /* device initialized */
- int initialized;
- /* vpbe dac clock */
- struct clk *dac_clk;
- /* osd_device pointer */
- struct osd_state *osd_device;
- /* venc device pointer */
- struct venc_platform_data *venc_device;
- /*
- * fields below are accessed by users of vpbe_device. Not the
- * ones above
- */
-
- /* current output */
- int current_out_index;
- /* lock used by caller to do atomic operation on vpbe device */
- /* current timings set in the controller */
- struct vpbe_enc_mode_info current_timings;
- /* venc sub device */
- struct v4l2_subdev *venc;
- /* device operations below */
- struct vpbe_device_ops ops;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
deleted file mode 100644
index d8751ea926a2..000000000000
--- a/include/media/davinci/vpbe_display.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- */
-#ifndef VPBE_DISPLAY_H
-#define VPBE_DISPLAY_H
-
-/* Header files */
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-fh.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_osd.h>
-#include <media/davinci/vpbe.h>
-
-#define VPBE_DISPLAY_MAX_DEVICES 2
-
-enum vpbe_display_device_id {
- VPBE_DISPLAY_DEVICE_0,
- VPBE_DISPLAY_DEVICE_1
-};
-
-#define VPBE_DISPLAY_DRV_NAME "vpbe-display"
-
-#define VPBE_DISPLAY_MAJOR_RELEASE 1
-#define VPBE_DISPLAY_MINOR_RELEASE 0
-#define VPBE_DISPLAY_BUILD 1
-#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
- (VPBE_DISPLAY_MINOR_RELEASE << 8) | \
- VPBE_DISPLAY_BUILD)
-
-#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \
- (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
-
-/* Exp ratio numerator and denominator constants */
-#define VPBE_DISPLAY_H_EXP_RATIO_N 9
-#define VPBE_DISPLAY_H_EXP_RATIO_D 8
-#define VPBE_DISPLAY_V_EXP_RATIO_N 6
-#define VPBE_DISPLAY_V_EXP_RATIO_D 5
-
-/* Zoom multiplication factor */
-#define VPBE_DISPLAY_ZOOM_4X 4
-#define VPBE_DISPLAY_ZOOM_2X 2
-
-/* Structures */
-struct display_layer_info {
- int enable;
- /* Layer ID used by Display Manager */
- enum osd_layer id;
- struct osd_layer_config config;
- enum osd_zoom_factor h_zoom;
- enum osd_zoom_factor v_zoom;
- enum osd_h_exp_ratio h_exp;
- enum osd_v_exp_ratio v_exp;
-};
-
-struct vpbe_disp_buffer {
- struct vb2_v4l2_buffer vb;
- struct list_head list;
-};
-
-/* vpbe display object structure */
-struct vpbe_layer {
- /* Pointer to the vpbe_display */
- struct vpbe_display *disp_dev;
- /* Pointer pointing to current v4l2_buffer */
- struct vpbe_disp_buffer *cur_frm;
- /* Pointer pointing to next v4l2_buffer */
- struct vpbe_disp_buffer *next_frm;
- /* vb2 specific parameters
- * Buffer queue used in vb2
- */
- struct vb2_queue buffer_queue;
- /* Queue of filled frames */
- struct list_head dma_queue;
- /* Used for video buffer handling */
- spinlock_t irqlock;
- /* V4l2 specific parameters */
- /* Identifies video device for this layer */
- struct video_device video_dev;
- /* Used to store pixel format */
- struct v4l2_pix_format pix_fmt;
- enum v4l2_field buf_field;
- /* Video layer configuration params */
- struct display_layer_info layer_info;
- /* vpbe specific parameters
- * enable window for display
- */
- unsigned char window_enable;
- /* number of open instances of the layer */
- unsigned int usrs;
- /* Indicates id of the field which is being displayed */
- unsigned int field_id;
- /* Identifies device object */
- enum vpbe_display_device_id device_id;
- /* facilitation of ioctl ops lock by v4l2*/
- struct mutex opslock;
- u8 layer_first_int;
-};
-
-/* vpbe device structure */
-struct vpbe_display {
- /* layer specific parameters */
- /* lock for isr updates to buf layers*/
- spinlock_t dma_queue_lock;
- /* C-Plane offset from start of y-plane */
- unsigned int cbcr_ofst;
- struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
- struct vpbe_device *vpbe_dev;
- struct osd_state *osd_device;
-};
-
-struct buf_config_params {
- unsigned char min_numbuffers;
- unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
- unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
- unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
-};
-
-#endif /* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
deleted file mode 100644
index a4fc4f2a56fb..000000000000
--- a/include/media/davinci/vpbe_osd.h
+++ /dev/null
@@ -1,382 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2007-2009 Texas Instruments Inc
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Andy Lowe (alowe@mvista.com), MontaVista Software
- * - Initial version
- * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
- * - ported to sub device interface
- */
-#ifndef _OSD_H
-#define _OSD_H
-
-#include <media/davinci/vpbe_types.h>
-
-#define DM644X_VPBE_OSD_SUBDEV_NAME "dm644x,vpbe-osd"
-#define DM365_VPBE_OSD_SUBDEV_NAME "dm365,vpbe-osd"
-#define DM355_VPBE_OSD_SUBDEV_NAME "dm355,vpbe-osd"
-
-/**
- * enum osd_layer
- * @WIN_OSD0: On-Screen Display Window 0
- * @WIN_VID0: Video Window 0
- * @WIN_OSD1: On-Screen Display Window 1
- * @WIN_VID1: Video Window 1
- *
- * Description:
- * An enumeration of the osd display layers.
- */
-enum osd_layer {
- WIN_OSD0,
- WIN_VID0,
- WIN_OSD1,
- WIN_VID1,
-};
-
-/**
- * enum osd_win_layer
- * @OSDWIN_OSD0: On-Screen Display Window 0
- * @OSDWIN_OSD1: On-Screen Display Window 1
- *
- * Description:
- * An enumeration of the OSD Window layers.
- */
-enum osd_win_layer {
- OSDWIN_OSD0,
- OSDWIN_OSD1,
-};
-
-/**
- * enum osd_pix_format
- * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
- * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
- * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
- * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
- * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
- * @PIXFMT_YCBCRI: YUV 4:2:2
- * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
- * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap
- * @PIXFMT_NV12: YUV 4:2:0 planar
- * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
- *
- * Description:
- * An enumeration of the DaVinci pixel formats.
- */
-enum osd_pix_format {
- PIXFMT_1BPP = 0,
- PIXFMT_2BPP,
- PIXFMT_4BPP,
- PIXFMT_8BPP,
- PIXFMT_RGB565,
- PIXFMT_YCBCRI,
- PIXFMT_RGB888,
- PIXFMT_YCRCBI,
- PIXFMT_NV12,
- PIXFMT_OSD_ATTR,
-};
-
-/**
- * enum osd_h_exp_ratio
- * @H_EXP_OFF: no expansion (1/1)
- * @H_EXP_9_OVER_8: 9/8 expansion ratio
- * @H_EXP_3_OVER_2: 3/2 expansion ratio
- *
- * Description:
- * An enumeration of the available horizontal expansion ratios.
- */
-enum osd_h_exp_ratio {
- H_EXP_OFF,
- H_EXP_9_OVER_8,
- H_EXP_3_OVER_2,
-};
-
-/**
- * enum osd_v_exp_ratio
- * @V_EXP_OFF: no expansion (1/1)
- * @V_EXP_6_OVER_5: 6/5 expansion ratio
- *
- * Description:
- * An enumeration of the available vertical expansion ratios.
- */
-enum osd_v_exp_ratio {
- V_EXP_OFF,
- V_EXP_6_OVER_5,
-};
-
-/**
- * enum osd_zoom_factor
- * @ZOOM_X1: no zoom (x1)
- * @ZOOM_X2: x2 zoom
- * @ZOOM_X4: x4 zoom
- *
- * Description:
- * An enumeration of the available zoom factors.
- */
-enum osd_zoom_factor {
- ZOOM_X1,
- ZOOM_X2,
- ZOOM_X4,
-};
-
-/**
- * enum osd_clut
- * @ROM_CLUT: ROM CLUT
- * @RAM_CLUT: RAM CLUT
- *
- * Description:
- * An enumeration of the available Color Lookup Tables (CLUTs).
- */
-enum osd_clut {
- ROM_CLUT,
- RAM_CLUT,
-};
-
-/**
- * enum osd_rom_clut
- * @ROM_CLUT0: Macintosh CLUT
- * @ROM_CLUT1: CLUT from DM270 and prior devices
- *
- * Description:
- * An enumeration of the ROM Color Lookup Table (CLUT) options.
- */
-enum osd_rom_clut {
- ROM_CLUT0,
- ROM_CLUT1,
-};
-
-/**
- * enum osd_blending_factor
- * @OSD_0_VID_8: OSD pixels are fully transparent
- * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
- * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
- * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
- * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
- * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
- * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
- * @OSD_8_VID_0: OSD pixels are fully opaque
- *
- * Description:
- * An enumeration of the DaVinci pixel blending factor options.
- */
-enum osd_blending_factor {
- OSD_0_VID_8,
- OSD_1_VID_7,
- OSD_2_VID_6,
- OSD_3_VID_5,
- OSD_4_VID_4,
- OSD_5_VID_3,
- OSD_6_VID_2,
- OSD_8_VID_0,
-};
-
-/**
- * enum osd_blink_interval
- * @BLINK_X1: blink interval is 1 vertical refresh cycle
- * @BLINK_X2: blink interval is 2 vertical refresh cycles
- * @BLINK_X3: blink interval is 3 vertical refresh cycles
- * @BLINK_X4: blink interval is 4 vertical refresh cycles
- *
- * Description:
- * An enumeration of the DaVinci pixel blinking interval options.
- */
-enum osd_blink_interval {
- BLINK_X1,
- BLINK_X2,
- BLINK_X3,
- BLINK_X4,
-};
-
-/**
- * enum osd_cursor_h_width
- * @H_WIDTH_1: horizontal line width is 1 pixel
- * @H_WIDTH_4: horizontal line width is 4 pixels
- * @H_WIDTH_8: horizontal line width is 8 pixels
- * @H_WIDTH_12: horizontal line width is 12 pixels
- * @H_WIDTH_16: horizontal line width is 16 pixels
- * @H_WIDTH_20: horizontal line width is 20 pixels
- * @H_WIDTH_24: horizontal line width is 24 pixels
- * @H_WIDTH_28: horizontal line width is 28 pixels
- */
-enum osd_cursor_h_width {
- H_WIDTH_1,
- H_WIDTH_4,
- H_WIDTH_8,
- H_WIDTH_12,
- H_WIDTH_16,
- H_WIDTH_20,
- H_WIDTH_24,
- H_WIDTH_28,
-};
-
-/**
- * enum osd_cursor_v_width
- * @V_WIDTH_1: vertical line width is 1 line
- * @V_WIDTH_2: vertical line width is 2 lines
- * @V_WIDTH_4: vertical line width is 4 lines
- * @V_WIDTH_6: vertical line width is 6 lines
- * @V_WIDTH_8: vertical line width is 8 lines
- * @V_WIDTH_10: vertical line width is 10 lines
- * @V_WIDTH_12: vertical line width is 12 lines
- * @V_WIDTH_14: vertical line width is 14 lines
- */
-enum osd_cursor_v_width {
- V_WIDTH_1,
- V_WIDTH_2,
- V_WIDTH_4,
- V_WIDTH_6,
- V_WIDTH_8,
- V_WIDTH_10,
- V_WIDTH_12,
- V_WIDTH_14,
-};
-
-/**
- * struct osd_cursor_config
- * @xsize: horizontal size in pixels
- * @ysize: vertical size in lines
- * @xpos: horizontal offset in pixels from the left edge of the display
- * @ypos: vertical offset in lines from the top of the display
- * @interlaced: Non-zero if the display is interlaced, or zero otherwise
- * @h_width: horizontal line width
- * @v_width: vertical line width
- * @clut: the CLUT selector (ROM or RAM) for the cursor color
- * @clut_index: an index into the CLUT for the cursor color
- *
- * Description:
- * A structure describing the configuration parameters of the hardware
- * rectangular cursor.
- */
-struct osd_cursor_config {
- unsigned xsize;
- unsigned ysize;
- unsigned xpos;
- unsigned ypos;
- int interlaced;
- enum osd_cursor_h_width h_width;
- enum osd_cursor_v_width v_width;
- enum osd_clut clut;
- unsigned char clut_index;
-};
-
-/**
- * struct osd_layer_config
- * @pixfmt: pixel format
- * @line_length: offset in bytes between start of each line in memory
- * @xsize: number of horizontal pixels displayed per line
- * @ysize: number of lines displayed
- * @xpos: horizontal offset in pixels from the left edge of the display
- * @ypos: vertical offset in lines from the top of the display
- * @interlaced: Non-zero if the display is interlaced, or zero otherwise
- *
- * Description:
- * A structure describing the configuration parameters of an On-Screen Display
- * (OSD) or video layer related to how the image is stored in memory.
- * @line_length must be a multiple of the cache line size (32 bytes).
- */
-struct osd_layer_config {
- enum osd_pix_format pixfmt;
- unsigned line_length;
- unsigned xsize;
- unsigned ysize;
- unsigned xpos;
- unsigned ypos;
- int interlaced;
-};
-
-/* parameters that apply on a per-window (OSD or video) basis */
-struct osd_window_state {
- int is_allocated;
- int is_enabled;
- unsigned long fb_base_phys;
- enum osd_zoom_factor h_zoom;
- enum osd_zoom_factor v_zoom;
- struct osd_layer_config lconfig;
-};
-
-/* parameters that apply on a per-OSD-window basis */
-struct osd_osdwin_state {
- enum osd_clut clut;
- enum osd_blending_factor blend;
- int colorkey_blending;
- unsigned colorkey;
- int rec601_attenuation;
- /* index is pixel value */
- unsigned char palette_map[16];
-};
-
-/* hardware rectangular cursor parameters */
-struct osd_cursor_state {
- int is_enabled;
- struct osd_cursor_config config;
-};
-
-struct osd_state;
-
-struct vpbe_osd_ops {
- int (*initialize)(struct osd_state *sd);
- int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
- void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
- int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
- int otherwin);
- void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
- int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
- struct osd_layer_config *lconfig);
- void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
- struct osd_layer_config *lconfig);
- void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
- unsigned long fb_base_phys,
- unsigned long cbcr_ofst);
- void (*set_left_margin)(struct osd_state *sd, u32 val);
- void (*set_top_margin)(struct osd_state *sd, u32 val);
- void (*set_interpolation_filter)(struct osd_state *sd, int filter);
- int (*set_vid_expansion)(struct osd_state *sd,
- enum osd_h_exp_ratio h_exp,
- enum osd_v_exp_ratio v_exp);
- void (*get_vid_expansion)(struct osd_state *sd,
- enum osd_h_exp_ratio *h_exp,
- enum osd_v_exp_ratio *v_exp);
- void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
- enum osd_zoom_factor h_zoom,
- enum osd_zoom_factor v_zoom);
-};
-
-struct osd_state {
- enum vpbe_version vpbe_type;
- spinlock_t lock;
- struct device *dev;
- dma_addr_t osd_base_phys;
- void __iomem *osd_base;
- unsigned long osd_size;
- /* 1-->the isr will toggle the VID0 ping-pong buffer */
- int pingpong;
- int interpolation_filter;
- int field_inversion;
- enum osd_h_exp_ratio osd_h_exp;
- enum osd_v_exp_ratio osd_v_exp;
- enum osd_h_exp_ratio vid_h_exp;
- enum osd_v_exp_ratio vid_v_exp;
- enum osd_clut backg_clut;
- unsigned backg_clut_index;
- enum osd_rom_clut rom_clut;
- int is_blinking;
- /* attribute window blinking enabled */
- enum osd_blink_interval blink;
- /* YCbCrI or YCrCbI */
- enum osd_pix_format yc_pixfmt;
- /* columns are Y, Cb, Cr */
- unsigned char clut_ram[256][3];
- struct osd_cursor_state cursor;
- /* OSD0, VID0, OSD1, VID1 */
- struct osd_window_state win[4];
- /* OSD0, OSD1 */
- struct osd_osdwin_state osdwin[2];
- /* OSD device Operations */
- struct vpbe_osd_ops ops;
-};
-
-struct osd_platform_data {
- int field_inv_wa_enable;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
deleted file mode 100644
index 6015cda235cc..000000000000
--- a/include/media/davinci/vpbe_types.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_TYPES_H
-#define _VPBE_TYPES_H
-
-enum vpbe_version {
- VPBE_VERSION_1 = 1,
- VPBE_VERSION_2,
- VPBE_VERSION_3,
-};
-
-/* vpbe_timing_type - Timing types used in vpbe device */
-enum vpbe_enc_timings_type {
- VPBE_ENC_STD = 0x1,
- VPBE_ENC_DV_TIMINGS = 0x4,
- /* Used when set timings through FB device interface */
- VPBE_ENC_TIMINGS_INVALID = 0x8,
-};
-
-/*
- * struct vpbe_enc_mode_info
- * @name: ptr to name string of the standard, "NTSC", "PAL" etc
- * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
- * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
- * @xres: x or horizontal resolution of the display
- * @yres: y or vertical resolution of the display
- * @fps: frame per second
- * @left_margin: left margin of the display
- * @right_margin: right margin of the display
- * @upper_margin: upper margin of the display
- * @lower_margin: lower margin of the display
- * @hsync_len: h-sync length
- * @vsync_len: v-sync length
- * @flags: bit field: bit usage is documented below
- *
- * Description:
- * Structure holding timing and resolution information of a standard.
- * Used by vpbe_device to set required non-standard timing in the
- * venc when lcd controller output is connected to a external encoder.
- * A table of timings is maintained in vpbe device to set this in
- * venc when external encoder is connected to lcd controller output.
- * Encoder may provide a g_dv_timings() API to override these values
- * as needed.
- *
- * Notes
- * ------
- * if_type should be used only by encoder manager and encoder.
- * flags usage
- * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
- * b1 - vsync polarity, 0 - negative, 1 - positive
- * b2 - field id polarity, 0 - negative, 1 - positive
- */
-struct vpbe_enc_mode_info {
- unsigned char *name;
- enum vpbe_enc_timings_type timings_type;
- v4l2_std_id std_id;
- struct v4l2_dv_timings dv_timings;
- unsigned int interlaced;
- unsigned int xres;
- unsigned int yres;
- struct v4l2_fract aspect;
- struct v4l2_fract fps;
- unsigned int left_margin;
- unsigned int right_margin;
- unsigned int upper_margin;
- unsigned int lower_margin;
- unsigned int hsync_len;
- unsigned int vsync_len;
- unsigned int flags;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
deleted file mode 100644
index 93cf6a5fb49d..000000000000
--- a/include/media/davinci/vpbe_venc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_VENC_H
-#define _VPBE_VENC_H
-
-#include <media/v4l2-subdev.h>
-#include <media/davinci/vpbe_types.h>
-
-#define DM644X_VPBE_VENC_SUBDEV_NAME "dm644x,vpbe-venc"
-#define DM365_VPBE_VENC_SUBDEV_NAME "dm365,vpbe-venc"
-#define DM355_VPBE_VENC_SUBDEV_NAME "dm355,vpbe-venc"
-
-/* venc events */
-#define VENC_END_OF_FRAME BIT(0)
-#define VENC_FIRST_FIELD BIT(1)
-#define VENC_SECOND_FIELD BIT(2)
-
-struct venc_platform_data {
- int (*setup_pinmux)(u32 if_type, int field);
- int (*setup_clock)(enum vpbe_enc_timings_type type,
- unsigned int pixclock);
- int (*setup_if_config)(u32 pixcode);
- /* Number of LCD outputs supported */
- int num_lcd_outputs;
- struct vpbe_if_params *lcd_if_params;
-};
-
-enum venc_ioctls {
- VENC_GET_FLD = 1,
-};
-
-/* exported functions */
-struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
- const char *venc_name);
-#endif
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
deleted file mode 100644
index 315fa77e238c..000000000000
--- a/include/media/davinci/vpss.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Texas Instruments Inc
- *
- * vpss - video processing subsystem module header file.
- *
- * Include this header file if a driver needs to configure vpss system
- * module. It exports a set of library functions for video drivers to
- * configure vpss system module functions such as clock enable/disable,
- * vpss interrupt mux to arm, and other common vpss system module
- * functions.
- */
-#ifndef _VPSS_H
-#define _VPSS_H
-
-/* selector for ccdc input selection on DM355 */
-enum vpss_ccdc_source_sel {
- VPSS_CCDCIN,
- VPSS_HSSIIN,
- VPSS_PGLPBK, /* for DM365 only */
- VPSS_CCDCPG /* for DM365 only */
-};
-
-struct vpss_sync_pol {
- unsigned int ccdpg_hdpol:1;
- unsigned int ccdpg_vdpol:1;
-};
-
-struct vpss_pg_frame_size {
- short hlpfr;
- short pplen;
-};
-
-/* Used for enable/disable VPSS Clock */
-enum vpss_clock_sel {
- /* DM355/DM365 */
- VPSS_CCDC_CLOCK,
- VPSS_IPIPE_CLOCK,
- VPSS_H3A_CLOCK,
- VPSS_CFALD_CLOCK,
- /*
- * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api
- * following applies:-
- * en = 0 selects ENC_CLK
- * en = 1 selects ENC_CLK/2
- */
- VPSS_VENC_CLOCK_SEL,
- VPSS_VPBE_CLOCK,
- /* DM365 only clocks */
- VPSS_IPIPEIF_CLOCK,
- VPSS_RSZ_CLOCK,
- VPSS_BL_CLOCK,
- /*
- * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api
- * following applies:-
- * en = 0 disable internal PCLK
- * en = 1 enables internal PCLK
- */
- VPSS_PCLK_INTERNAL,
- /*
- * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api
- * following applies:-
- * en = 0 enables MMR clock
- * en = 1 enables VPSS clock
- */
- VPSS_PSYNC_CLOCK_SEL,
- VPSS_LDC_CLOCK_SEL,
- VPSS_OSD_CLOCK_SEL,
- VPSS_FDIF_CLOCK,
- VPSS_LDC_CLOCK
-};
-
-/* select input to ccdc on dm355 */
-int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel);
-/* enable/disable a vpss clock, 0 - success, -1 - failure */
-int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en);
-/* set sync polarity, only for DM365*/
-void dm365_vpss_set_sync_pol(struct vpss_sync_pol);
-/* set the PG_FRAME_SIZE register, only for DM365 */
-void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size);
-
-/* wbl reset for dm644x */
-enum vpss_wbl_sel {
- VPSS_PCR_AEW_WBL_0 = 16,
- VPSS_PCR_AF_WBL_0,
- VPSS_PCR_RSZ4_WBL_0,
- VPSS_PCR_RSZ3_WBL_0,
- VPSS_PCR_RSZ2_WBL_0,
- VPSS_PCR_RSZ1_WBL_0,
- VPSS_PCR_PREV_WBL_0,
- VPSS_PCR_CCDC_WBL_O,
-};
-/* clear wbl overflow flag for DM6446 */
-int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel);
-
-/* set sync polarity*/
-void vpss_set_sync_pol(struct vpss_sync_pol sync);
-/* set the PG_FRAME_SIZE register */
-void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size);
-/*
- * vpss_check_and_clear_interrupt - check and clear interrupt
- * @irq - common enumerator for IRQ
- *
- * Following return values used:-
- * 0 - interrupt occurred and cleared
- * 1 - interrupt not occurred
- * 2 - interrupt status not available
- */
-int vpss_dma_complete_interrupt(void);
-
-#endif