cfg80211: fix NAN bands definition

The nl80211_nan_dual_band_conf enumeration doesn't make much sense.
The default value is assigned to a bit, which makes it weird if the
default bit and other bits are set at the same time.

To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy
configuration to let the drivers define which bands are supported.
This is exposed to the userspace, which then can make a decision on
which band(s) to use.  Additionally, rename all "dual_band" elements
to "bands", to make things clearer.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 26 insertions, 31 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index cd547b864595..5ed257c4cd4e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -10,7 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015	Intel Deutschland GmbH
+ * Copyright 2015-2017	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -854,12 +854,15 @@
  *	cfg80211_scan_done().
  *
  * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
- *	%NL80211_ATTR_WDEV interface. This interface must have been previously
- *	created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
- *	NAN interface will create or join a cluster. This command must have a
- *	valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
- *	%NL80211_ATTR_NAN_DUAL attributes.
- *	After this command NAN functions can be added.
+ *	%NL80211_ATTR_WDEV interface. This interface must have been
+ *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
+ *	has been started, the NAN interface will create or join a
+ *	cluster. This command must have a valid
+ *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
+ *	omitted or set to 0, it means don't-care and the device will
+ *	decide what to use.  After this command NAN functions can be
+ *	added.
  * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
  *	its %NL80211_ATTR_WDEV interface.
  * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
@@ -880,10 +883,14 @@
  *	This command is also used as a notification sent when a NAN function is
  *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
  *	and %NL80211_ATTR_COOKIE attributes.
- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
- *	must be operational (%NL80211_CMD_START_NAN was executed).
- *	It must contain at least one of the following attributes:
- *	%NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
+ *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
+ *	was executed).  It must contain at least one of the following
+ *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
+ *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
+ *	current configuration is not changed.  If it is present but
+ *	set to zero, the configuration is changed to don't-care
+ *	(i.e. the device can decide what to do).
  * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
@@ -1963,10 +1970,13 @@ enum nl80211_commands {
  *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
  *	Also, values 1 and 255 are reserved for certification purposes and
  *	should not be used during a normal device operation.
- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
- *	&enum nl80211_nan_dual_band_conf). This attribute is used with
- *	%NL80211_CMD_START_NAN and optionally with
- *	%NL80211_CMD_CHANGE_NAN_CONFIG.
+ * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
+ *	bitmask of BIT(NL80211_BAND_*) as described in %enum
+ *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
+ *	would be set.  This attribute is used with
+ *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
+ *	it is optional.  If no bands are set, it means don't-care and
+ *	the device will decide what to use.
  * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
  *	&enum nl80211_nan_func_attributes for description of this nested
  *	attribute.
@@ -2397,7 +2407,7 @@ enum nl80211_attrs {
 	NL80211_ATTR_MESH_PEER_AID,
 
 	NL80211_ATTR_NAN_MASTER_PREF,
-	NL80211_ATTR_NAN_DUAL,
+	NL80211_ATTR_BANDS,
 	NL80211_ATTR_NAN_FUNC,
 	NL80211_ATTR_NAN_MATCH,
 
@@ -5071,21 +5081,6 @@ enum nl80211_bss_select_attr {
 };
 
 /**
- * enum nl80211_nan_dual_band_conf - NAN dual band configuration
- *
- * Defines the NAN dual band mode of operation
- *
- * @NL80211_NAN_BAND_DEFAULT: device default mode
- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
- * @NL80211_NAN_BAND_5GHZ: 5GHz mode
-  */
-enum nl80211_nan_dual_band_conf {
-	NL80211_NAN_BAND_DEFAULT	= 1 << 0,
-	NL80211_NAN_BAND_2GHZ		= 1 << 1,
-	NL80211_NAN_BAND_5GHZ		= 1 << 2,
-};
-
-/**
  * enum nl80211_nan_function_type - NAN function type
  *
  * Defines the function type of a NAN function