drm: add support for tiled/compressed/etc modifier in addfb2

In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats.  Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.

The proposal is to add a per-plane format modifier.  This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.

v1: original
v1.5: increase modifier to 64b

v2: Incorporate review comments from the big thread, plus a few more.

- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
  they're dealing with old userspace and need to fish out e.g. tiling
  from other information.
- After rolling out checks for ->modifier to all drivers I've decided
  that this is way too fragile and needs an explicit opt-in flag. So
  do that instead.
- Add a define (just for documentation really) for the "NONE"
  modifier. Imo we don't need to add mask #defines since drivers
  really should only do exact matches against values defined with
  fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
  sure whether that one is accurate.

v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
  it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
  properly documented, requested by Rob.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

4 files changed, 46 insertions, 0 deletions

diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 0ebd9286b332..cee54c45eba9 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -202,6 +202,7 @@ struct drm_framebuffer {
 	const struct drm_framebuffer_funcs *funcs;
 	unsigned int pitches[4];
 	unsigned int offsets[4];
+	uint64_t modifier[4];
 	unsigned int width;
 	unsigned int height;
 	/* depth can be 15 or 16 */
@@ -1152,6 +1153,9 @@ struct drm_mode_config {
 	/* whether async page flip is supported or not */
 	bool async_page_flip;
 
+	/* whether the driver supports fb modifiers */
+	bool allow_fb_modifiers;
+
 	/* cursor size */
 	uint32_t cursor_width, cursor_height;
 };
diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h
index 01b2d6d0e355..ff6ef62d084b 100644
--- a/include/uapi/drm/drm.h
+++ b/include/uapi/drm/drm.h
@@ -630,6 +630,7 @@ struct drm_gem_open {
  */
 #define DRM_CAP_CURSOR_WIDTH		0x8
 #define DRM_CAP_CURSOR_HEIGHT		0x9
+#define DRM_CAP_ADDFB2_MODIFIERS	0x10
 
 /** DRM_IOCTL_GET_CAP ioctl argument type */
 struct drm_get_cap {
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index 646ae5f39f42..622109677747 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -132,4 +132,36 @@
 #define DRM_FORMAT_YUV444	fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */
 #define DRM_FORMAT_YVU444	fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */
 
+
+/*
+ * Format Modifiers:
+ *
+ * Format modifiers describe, typically, a re-ordering or modification
+ * of the data in a plane of an FB.  This can be used to express tiled/
+ * swizzled formats, or compression, or a combination of the two.
+ *
+ * The upper 8 bits of the format modifier are a vendor-id as assigned
+ * below.  The lower 56 bits are assigned as vendor sees fit.
+ */
+
+/* Vendor Ids: */
+#define DRM_FORMAT_MOD_NONE           0
+#define DRM_FORMAT_MOD_VENDOR_INTEL   0x01
+#define DRM_FORMAT_MOD_VENDOR_AMD     0x02
+#define DRM_FORMAT_MOD_VENDOR_NV      0x03
+#define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
+#define DRM_FORMAT_MOD_VENDOR_QCOM    0x05
+/* add more to the end as needed */
+
+#define fourcc_mod_code(vendor, val) \
+	((((u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | (val & 0x00ffffffffffffffL))
+
+/*
+ * Format Modifier tokens:
+ *
+ * When adding a new token please document the layout with a code comment,
+ * similar to the fourcc codes above. drm_fourcc.h is considered the
+ * authoritative source for all of these.
+ */
+
 #endif /* DRM_FOURCC_H */
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index ca788e01dab2..dbeba949462a 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -336,6 +336,7 @@ struct drm_mode_fb_cmd {
 };
 
 #define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
+#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifer[] */
 
 struct drm_mode_fb_cmd2 {
 	__u32 fb_id;
@@ -356,10 +357,18 @@ struct drm_mode_fb_cmd2 {
 	 * So it would consist of Y as offsets[0] and UV as
 	 * offsets[1].  Note that offsets[0] will generally
 	 * be 0 (but this is not required).
+	 *
+	 * To accommodate tiled, compressed, etc formats, a per-plane
+	 * modifier can be specified.  The default value of zero
+	 * indicates "native" format as specified by the fourcc.
+	 * Vendor specific modifier token.  This allows, for example,
+	 * different tiling/swizzling pattern on different planes.
+	 * See discussion above of DRM_FORMAT_MOD_xxx.
 	 */
 	__u32 handles[4];
 	__u32 pitches[4]; /* pitch for each plane */
 	__u32 offsets[4]; /* offset of each plane */
+	__u64 modifier[4]; /* ie, tiling, compressed (per plane) */
 };
 
 #define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01