perf trace: Add scripting ops

Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.

The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.

See below for details on the interface.

This patch also adds a couple command-line options to 'perf
trace':

The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:

[language spec:]scriptname[.ext]

Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages.  The
specs can be used either as prefixes or extensions.

If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
 If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to.  Language specs are case
insensitive.

e.g. Perl scripts can be specified in the following ways:

Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl

The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language.  Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.

Adding support for a scripting language
---------------------------------------

The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:

It consists of the following four functions:

    start_script()
    stop_script()
    process_event()
    generate_script()

start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.

stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.

process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'.  The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.

generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event.  Again, look at the Perl
implementation for clues as to how that can be done.  This is an
optional, but very useful op.

Support for a given language should also add a language-specific
setup function and call it from setup_scripting().  The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register().  When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.

In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
 The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script.  The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.

There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible.  One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values.  See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface.  Again, see the
Perl implementation for examples.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 250 insertions, 5 deletions

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index a7750256c408..e96bb534b948 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -6,6 +6,46 @@
 #include "util/thread.h"
 #include "util/header.h"
 
+static char const		*script_name;
+static char const		*generate_script_lang;
+
+static int default_start_script(const char *script __attribute((unused)))
+{
+	return 0;
+}
+
+static int default_stop_script(void)
+{
+	return 0;
+}
+
+static int default_generate_script(const char *outfile __attribute ((unused)))
+{
+	return 0;
+}
+
+static struct scripting_ops default_scripting_ops = {
+	.start_script		= default_start_script,
+	.stop_script		= default_stop_script,
+	.process_event		= print_event,
+	.generate_script	= default_generate_script,
+};
+
+static struct scripting_ops	*scripting_ops;
+
+static void setup_scripting(void)
+{
+	/* make sure PERF_EXEC_PATH is set for scripts */
+	perf_set_argv_exec_path(perf_exec_path());
+
+	scripting_ops = &default_scripting_ops;
+}
+
+static int cleanup_scripting(void)
+{
+	return scripting_ops->stop_script();
+}
+
 #include "util/parse-options.h"
 
 #include "perf.h"
@@ -13,11 +53,12 @@
 
 #include "util/trace-event.h"
 #include "util/data_map.h"
+#include "util/exec_cmd.h"
 
-static char		const *input_name = "perf.data";
+static char const		*input_name = "perf.data";
 
-static struct perf_header *header;
-static u64		sample_type;
+static struct perf_header	*header;
+static u64			sample_type;
 
 static int process_sample_event(event_t *event)
 {
@@ -69,7 +110,8 @@ static int process_sample_event(event_t *event)
 		 * field, although it should be the same than this perf
 		 * event pid
 		 */
-		print_event(cpu, raw->data, raw->size, timestamp, thread->comm);
+		scripting_ops->process_event(cpu, raw->data, raw->size,
+					     timestamp, thread->comm);
 	}
 	event__stats.total += period;
 
@@ -105,6 +147,154 @@ static int __cmd_trace(void)
 				       0, 0, &event__cwdlen, &event__cwd);
 }
 
+struct script_spec {
+	struct list_head	node;
+	struct scripting_ops	*ops;
+	char			spec[0];
+};
+
+LIST_HEAD(script_specs);
+
+static struct script_spec *script_spec__new(const char *spec,
+					    struct scripting_ops *ops)
+{
+	struct script_spec *s = malloc(sizeof(*s) + strlen(spec) + 1);
+
+	if (s != NULL) {
+		strcpy(s->spec, spec);
+		s->ops = ops;
+	}
+
+	return s;
+}
+
+static void script_spec__delete(struct script_spec *s)
+{
+	free(s->spec);
+	free(s);
+}
+
+static void script_spec__add(struct script_spec *s)
+{
+	list_add_tail(&s->node, &script_specs);
+}
+
+static struct script_spec *script_spec__find(const char *spec)
+{
+	struct script_spec *s;
+
+	list_for_each_entry(s, &script_specs, node)
+		if (strcasecmp(s->spec, spec) == 0)
+			return s;
+	return NULL;
+}
+
+static struct script_spec *script_spec__findnew(const char *spec,
+						struct scripting_ops *ops)
+{
+	struct script_spec *s = script_spec__find(spec);
+
+	if (s)
+		return s;
+
+	s = script_spec__new(spec, ops);
+	if (!s)
+		goto out_delete_spec;
+
+	script_spec__add(s);
+
+	return s;
+
+out_delete_spec:
+	script_spec__delete(s);
+
+	return NULL;
+}
+
+int script_spec_register(const char *spec, struct scripting_ops *ops)
+{
+	struct script_spec *s;
+
+	s = script_spec__find(spec);
+	if (s)
+		return -1;
+
+	s = script_spec__findnew(spec, ops);
+	if (!s)
+		return -1;
+
+	return 0;
+}
+
+static struct scripting_ops *script_spec__lookup(const char *spec)
+{
+	struct script_spec *s = script_spec__find(spec);
+	if (!s)
+		return NULL;
+
+	return s->ops;
+}
+
+static void list_available_languages(void)
+{
+	struct script_spec *s;
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, "Scripting language extensions (used in "
+		"perf trace -s [spec:]script.[spec]):\n\n");
+
+	list_for_each_entry(s, &script_specs, node)
+		fprintf(stderr, "  %-42s [%s]\n", s->spec, s->ops->name);
+
+	fprintf(stderr, "\n");
+}
+
+static int parse_scriptname(const struct option *opt __used,
+			    const char *str, int unset __used)
+{
+	char spec[PATH_MAX];
+	const char *script, *ext;
+	int len;
+
+	if (strcmp(str, "list") == 0) {
+		list_available_languages();
+		return 0;
+	}
+
+	script = strchr(str, ':');
+	if (script) {
+		len = script - str;
+		if (len >= PATH_MAX) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+		strncpy(spec, str, len);
+		spec[len] = '\0';
+		scripting_ops = script_spec__lookup(spec);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+		script++;
+	} else {
+		script = str;
+		ext = strchr(script, '.');
+		if (!ext) {
+			fprintf(stderr, "invalid script extension");
+			return -1;
+		}
+		scripting_ops = script_spec__lookup(++ext);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid script extension");
+			return -1;
+		}
+	}
+
+	script_name = strdup(script);
+
+	return 0;
+}
+
 static const char * const annotate_usage[] = {
 	"perf trace [<options>] <command>",
 	NULL
@@ -117,13 +307,23 @@ static const struct option options[] = {
 		    "be more verbose (show symbol address, etc)"),
 	OPT_BOOLEAN('l', "latency", &latency_format,
 		    "show latency attributes (irqs/preemption disabled, etc)"),
+	OPT_CALLBACK('s', "script", NULL, "name",
+		     "script file name (lang:script name, script name, or *)",
+		     parse_scriptname),
+	OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
+		   "generate perf-trace.xx script in specified language"),
+
 	OPT_END()
 };
 
 int cmd_trace(int argc, const char **argv, const char *prefix __used)
 {
+	int err;
+
 	symbol__init(0);
 
+	setup_scripting();
+
 	argc = parse_options(argc, argv, options, annotate_usage, 0);
 	if (argc) {
 		/*
@@ -136,5 +336,50 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 
 	setup_pager();
 
-	return __cmd_trace();
+	if (generate_script_lang) {
+		struct stat perf_stat;
+
+		int input = open(input_name, O_RDONLY);
+		if (input < 0) {
+			perror("failed to open file");
+			exit(-1);
+		}
+
+		err = fstat(input, &perf_stat);
+		if (err < 0) {
+			perror("failed to stat file");
+			exit(-1);
+		}
+
+		if (!perf_stat.st_size) {
+			fprintf(stderr, "zero-sized file, nothing to do!\n");
+			exit(0);
+		}
+
+		scripting_ops = script_spec__lookup(generate_script_lang);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+
+		header = perf_header__new();
+		if (header == NULL)
+			return -1;
+
+		perf_header__read(header, input);
+		err = scripting_ops->generate_script("perf-trace");
+		goto out;
+	}
+
+	if (script_name) {
+		err = scripting_ops->start_script(script_name);
+		if (err)
+			goto out;
+	}
+
+	err = __cmd_trace();
+
+	cleanup_scripting();
+out:
+	return err;
 }