Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 19 insertions, 14 deletions

diff --git a/tools/testing/selftests/bpf/README.rst b/tools/testing/selftests/bpf/README.rst
index ac9eda830187..ca064180d4d0 100644
--- a/tools/testing/selftests/bpf/README.rst
+++ b/tools/testing/selftests/bpf/README.rst
@@ -2,7 +2,10 @@
 BPF Selftest Notes
 ==================
 General instructions on running selftests can be found in
-`Documentation/bpf/bpf_devel_QA.rst`_.
+`Documentation/bpf/bpf_devel_QA.rst`__.
+
+__ /Documentation/bpf/bpf_devel_QA.rst#q-how-to-run-bpf-selftests
+
 
 Additional information about selftest failures are
 documented here.
@@ -30,11 +33,12 @@ The verifier will reject such code with above error.
 At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and
 the insn 20 undoes map_value addition. It is currently impossible for the
 verifier to understand such speculative pointer arithmetic.
-Hence
-    https://reviews.llvm.org/D85570
-addresses it on the compiler side. It was committed on llvm 12.
+Hence `this patch`__ addresses it on the compiler side. It was committed on llvm 12.
+
+__ https://reviews.llvm.org/D85570
 
 The corresponding C code
+
 .. code-block:: c
 
   for (int i = 0; i < MAX_CGROUPS_PATH_DEPTH; i++) {
@@ -77,10 +81,11 @@ The symptom for ``bpf_iter/netlink`` looks like
   17: (7b) *(u64 *)(r7 +0) = r2
   only read is supported
 
-This is due to a llvm BPF backend bug. The fix 
-  https://reviews.llvm.org/D78466
+This is due to a llvm BPF backend bug. `The fix`__
 has been pushed to llvm 10.x release branch and will be
-available in 10.0.1. The fix is available in llvm 11.0.0 trunk.
+available in 10.0.1. The patch is available in llvm 11.0.0 trunk.
+
+__  https://reviews.llvm.org/D78466
 
 BPF CO-RE-based tests and Clang version
 =======================================
@@ -94,11 +99,11 @@ them to Clang/LLVM. These sub-tests are going to be skipped if Clang is too
 old to support them, they shouldn't cause build failures or runtime test
 failures:
 
-  - __builtin_btf_type_id() ([0], [1], [2]);
-  - __builtin_preserve_type_info(), __builtin_preserve_enum_value() ([3], [4]).
+- __builtin_btf_type_id() [0_, 1_, 2_];
+- __builtin_preserve_type_info(), __builtin_preserve_enum_value() [3_, 4_].
 
-  [0] https://reviews.llvm.org/D74572
-  [1] https://reviews.llvm.org/D74668
-  [2] https://reviews.llvm.org/D85174
-  [3] https://reviews.llvm.org/D83878
-  [4] https://reviews.llvm.org/D83242
+.. _0: https://reviews.llvm.org/D74572
+.. _1: https://reviews.llvm.org/D74668
+.. _2: https://reviews.llvm.org/D85174
+.. _3: https://reviews.llvm.org/D83878
+.. _4: https://reviews.llvm.org/D83242