diff options
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 28 | ||||
| -rw-r--r-- | include/linux/mfd/dbx500-prcmu.h | 7 |
2 files changed, 32 insertions, 3 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index a1b3464cdba3..6e5a0a09c41a 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2332,6 +2332,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -2357,16 +2358,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) } /** - * prcmu_abb_write() - Write register value(s) to the ABB. + * prcmu_abb_write_masked() - Write masked register value(s) to the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. * @value: The value(s) to write. + * @mask: The mask(s) to use. * @size: The number of registers to write. * - * Reads register value(s) from the ABB. + * Writes masked register value(s) to the ABB. + * For each @value, only the bits set to 1 in the corresponding @mask + * will be written. The other bits are not changed. * @size has to be 1 for the current firmware version. */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size) { int r; @@ -2378,6 +2382,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -2400,6 +2405,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) } /** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Writes register value(s) to the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + u8 mask = ~0; + + return prcmu_abb_write_masked(slave, reg, value, &mask, size); +} + +/** * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem */ void prcmu_ac_wake_req(void) diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index eaa99a021785..d7674eb7305f 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -368,6 +368,7 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); @@ -620,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } +static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, + u8 size) +{ + return -ENOSYS; +} + static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) { return 0; |