diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input/touchscreen')
-rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt | 30 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt | 3 |
2 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt new file mode 100644 index 000000000000..51456c0e9a27 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt @@ -0,0 +1,30 @@ +Generic resistive touchscreen ADC + +Required properties: + + - compatible: must be "resistive-adc-touch" +The device must be connected to an ADC device that provides channels for +position measurement and optional pressure. +Refer to ../iio/iio-bindings.txt for details + - iio-channels: must have at least two channels connected to an ADC device. +These should correspond to the channels exposed by the ADC device and should +have the right index as the ADC device registers them. These channels +represent the relative position on the "x" and "y" axes. + - iio-channel-names: must have all the channels' names. Mandatory channels +are "x" and "y". + +Optional properties: + - iio-channels: The third channel named "pressure" is optional and can be +used if the ADC device also measures pressure besides position. +If this channel is missing, pressure will be ignored and the touchscreen +will only report position. + - iio-channel-names: optional channel named "pressure". + +Example: + + resistive_touch: resistive_touch { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "x", "y", "pressure"; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index 537643e86f61..d092d5d033a0 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -7,6 +7,9 @@ Optional properties for Touchscreens: (in pixels) - touchscreen-max-pressure : maximum reported pressure (arbitrary range dependent on the controller) + - touchscreen-min-pressure : minimum pressure on the touchscreen to be + achieved in order for the touchscreen + driver to report a touch event. - touchscreen-fuzz-x : horizontal noise value of the absolute input device (in pixels) - touchscreen-fuzz-y : vertical noise value of the absolute input |