1 files changed, 0 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
deleted file mode 100644
index 35039e720515..000000000000
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Renesas Electronics USB3.0 Peripheral driver
-
-Required properties:
-  - compatible: Must contain one of the following:
-	- "renesas,r8a774a1-usb3-peri"
-	- "renesas,r8a774c0-usb3-peri"
-	- "renesas,r8a7795-usb3-peri"
-	- "renesas,r8a7796-usb3-peri"
-	- "renesas,r8a77965-usb3-peri"
-	- "renesas,r8a77990-usb3-peri"
-	- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 or RZ/G2
-	  compatible device
-
-    When compatible with the generic version, nodes must list the
-    SoC-specific version corresponding to the platform first
-    followed by the generic version.
-
-  - reg: Base address and length of the register for the USB3.0 Peripheral
-  - interrupts: Interrupt specifier for the USB3.0 Peripheral
-  - clocks: clock phandle and specifier pair
-
-Optional properties:
-  - phys: phandle + phy specifier pair
-  - phy-names: must be "usb"
-
-Example of R-Car H3 ES1.x:
-	usb3_peri0: usb@ee020000 {
-		compatible = "renesas,r8a7795-usb3-peri",
-			     "renesas,rcar-gen3-usb3-peri";
-		reg = <0 0xee020000 0 0x400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 328>;
-	};
-
-	usb3_peri1: usb@ee060000 {
-		compatible = "renesas,r8a7795-usb3-peri",
-			     "renesas,rcar-gen3-usb3-peri";
-		reg = <0 0xee060000 0 0x400>;
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 327>;
-	};