summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/ts209-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x/ts209-setup.c')
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c38
1 files changed, 17 insertions, 21 deletions
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 5374b6edb9a1..b62fdb6cf6cb 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -332,16 +332,9 @@ static struct mv_sata_platform_data qnap_ts209_sata_data = {
* General Setup
****************************************************************************/
-
-static struct platform_device *qnap_ts209_devices[] __initdata = {
- &qnap_ts209_nor_flash,
- &qnap_ts209_button_device,
-};
-
/*
* QNAP TS-[12]09 specific power off method via UART1-attached PIC
*/
-
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
static void qnap_ts209_power_off(void)
@@ -372,12 +365,6 @@ static void __init qnap_ts209_init(void)
orion5x_init();
/*
- * Setup flash mapping
- */
- orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
- QNAP_TS209_NOR_BOOT_SIZE);
-
- /*
* Open a special address decode windows for the PCIe WA.
*/
orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
@@ -411,11 +398,22 @@ static void __init qnap_ts209_init(void)
orion5x_write(MPP_16_19_CTRL, 0x5500);
orion5x_gpio_set_valid_pins(0x3cc0fff);
- /* register ts209 specific power-off method */
- pm_power_off = qnap_ts209_power_off;
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ ts209_find_mac_addr();
+ orion5x_eth_init(&qnap_ts209_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&qnap_ts209_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts209_nor_flash);
- platform_add_devices(qnap_ts209_devices,
- ARRAY_SIZE(qnap_ts209_devices));
+ platform_device_register(&qnap_ts209_button_device);
/* Get RTC IRQ and register the chip */
if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
@@ -428,10 +426,8 @@ static void __init qnap_ts209_init(void)
pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
- ts209_find_mac_addr();
- orion5x_eth_init(&qnap_ts209_eth_data);
-
- orion5x_sata_init(&qnap_ts209_sata_data);
+ /* register ts209 specific power-off method */
+ pm_power_off = qnap_ts209_power_off;
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")