diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1000.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c new file mode 100644 index 000000000000..57ed5f1c4919 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1000.c @@ -0,0 +1,267 @@ +/* + * DBAu1000/1500/1100 board support + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1000_dma.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/reboot.h> +#include <prom.h> +#include "platform.h" + +#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) + +struct pci_dev; + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_DB1000: + return "DB1000"; + case BCSR_WHOAMI_DB1500: + return "DB1500"; + case BCSR_WHOAMI_DB1100: + return "DB1100"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +void __init board_setup(void) +{ + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + + printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); + +#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) + { + u32 pin_func; + + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); + } +#endif + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ + + /* Enable GPIO[31:0] inputs */ + alchemy_gpio1_input_enable(); +} + + +static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1500_pci_pd = { + .board_map_irq = db1500_map_pci_irq, +}; + +static struct platform_device db1500_pci_host_dev = { + .dev.platform_data = &db1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db1500_pci_init(void) +{ + if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500) + return platform_device_register(&db1500_pci_host_dev); + return 0; +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db1500_pci_init); + + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static struct resource alchemy_ac97c_res[] = { + [0] = { + .start = AU1000_AC97_PHYS_ADDR, + .end = AU1000_AC97_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMA_ID_AC97C_TX, + .end = DMA_ID_AC97C_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMA_ID_AC97C_RX, + .end = DMA_ID_AC97C_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device alchemy_ac97c_dev = { + .name = "alchemy-ac97c", + .id = -1, + .resource = alchemy_ac97c_res, + .num_resources = ARRAY_SIZE(alchemy_ac97c_res), +}; + +static struct platform_device alchemy_ac97c_dma_dev = { + .name = "alchemy-pcm-dma", + .id = 0, +}; + +static struct platform_device db1x00_codec_dev = { + .name = "ac97-codec", + .id = -1, +}; + +static struct platform_device db1x00_audio_dev = { + .name = "db1000-audio", +}; + +static struct platform_device *db1x00_devs[] = { + &db1x00_codec_dev, + &alchemy_ac97c_dma_dev, + &alchemy_ac97c_dev, + &db1x00_audio_dev, +}; + +static struct platform_device *db1100_devs[] = { + &au1100_lcd_device, +}; + +static int __init db1000_dev_init(void) +{ + int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + int c0, c1, d0, d1, s0, s1; + + if (board == BCSR_WHOAMI_DB1500) { + c0 = AU1500_GPIO2_INT; + c1 = AU1500_GPIO5_INT; + d0 = AU1500_GPIO0_INT; + d1 = AU1500_GPIO3_INT; + s0 = AU1500_GPIO1_INT; + s1 = AU1500_GPIO4_INT; + } else if (board == BCSR_WHOAMI_DB1100) { + c0 = AU1100_GPIO2_INT; + c1 = AU1100_GPIO5_INT; + d0 = AU1100_GPIO0_INT; + d1 = AU1100_GPIO3_INT; + s0 = AU1100_GPIO1_INT; + s1 = AU1100_GPIO4_INT; + platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); + } else if (board == BCSR_WHOAMI_DB1000) { + c0 = AU1000_GPIO2_INT; + c1 = AU1000_GPIO5_INT; + d0 = AU1000_GPIO0_INT; + d1 = AU1000_GPIO3_INT; + s0 = AU1000_GPIO1_INT; + s1 = AU1000_GPIO4_INT; + } else + return 0; /* unknown board, no further dev setup to do */ + + irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + c0, d0, /*s0*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + c1, d1, /*s1*/0, 0, 1); + + platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); + db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED); + return 0; +} +device_initcall(db1000_dev_init); |