diff options
Diffstat (limited to 'drivers/media/i2c/adv7511.c')
| -rw-r--r-- | drivers/media/i2c/adv7511.c | 1198 |
1 files changed, 1198 insertions, 0 deletions
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c new file mode 100644 index 000000000000..7a576097471f --- /dev/null +++ b/drivers/media/i2c/adv7511.c @@ -0,0 +1,1198 @@ +/* + * Analog Devices ADV7511 HDMI Transmitter Device Driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <linux/gpio.h> +#include <linux/workqueue.h> +#include <linux/v4l2-dv-timings.h> +#include <media/v4l2-device.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-dv-timings.h> +#include <media/adv7511.h> + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +#define MASK_ADV7511_EDID_RDY_INT 0x04 +#define MASK_ADV7511_MSEN_INT 0x40 +#define MASK_ADV7511_HPD_INT 0x80 + +#define MASK_ADV7511_HPD_DETECT 0x40 +#define MASK_ADV7511_MSEN_DETECT 0x20 +#define MASK_ADV7511_EDID_RDY 0x10 + +#define EDID_MAX_RETRIES (8) +#define EDID_DELAY 250 +#define EDID_MAX_SEGM 8 + +#define ADV7511_MAX_WIDTH 1920 +#define ADV7511_MAX_HEIGHT 1200 +#define ADV7511_MIN_PIXELCLOCK 20000000 +#define ADV7511_MAX_PIXELCLOCK 225000000 + +/* +********************************************************************** +* +* Arrays with configuration parameters for the ADV7511 +* +********************************************************************** +*/ + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +struct adv7511_state_edid { + /* total number of blocks */ + u32 blocks; + /* Number of segments read */ + u32 segments; + uint8_t data[EDID_MAX_SEGM * 256]; + /* Number of EDID read retries left */ + unsigned read_retries; + bool complete; +}; + +struct adv7511_state { + struct adv7511_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + int chip_revision; + uint8_t i2c_edid_addr; + uint8_t i2c_cec_addr; + /* Is the adv7511 powered on? */ + bool power_on; + /* Did we receive hotplug and rx-sense signals? */ + bool have_monitor; + /* timings from s_dv_timings */ + struct v4l2_dv_timings dv_timings; + /* controls */ + struct v4l2_ctrl *hdmi_mode_ctrl; + struct v4l2_ctrl *hotplug_ctrl; + struct v4l2_ctrl *rx_sense_ctrl; + struct v4l2_ctrl *have_edid0_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; + struct i2c_client *i2c_edid; + struct adv7511_state_edid edid; + /* Running counter of the number of detected EDIDs (for debugging) */ + unsigned edid_detect_counter; + struct workqueue_struct *work_queue; + struct delayed_work edid_handler; /* work entry */ +}; + +static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd); +static bool adv7511_check_edid_status(struct v4l2_subdev *sd); +static void adv7511_setup(struct v4l2_subdev *sd); +static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); +static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + + +static const struct v4l2_dv_timings_cap adv7511_timings_cap = { + .type = V4L2_DV_BT_656_1120, + .bt = { + .max_width = ADV7511_MAX_WIDTH, + .max_height = ADV7511_MAX_HEIGHT, + .min_pixelclock = ADV7511_MIN_PIXELCLOCK, + .max_pixelclock = ADV7511_MAX_PIXELCLOCK, + .standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, + .capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | + V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM, + }, +}; + +static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7511_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd; +} + +/* ------------------------ I2C ----------------------------------------------- */ + +static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, + u8 command, bool check) +{ + union i2c_smbus_data data; + + if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data)) + return data.byte; + if (check) + v4l_err(client, "error reading %02x, %02x\n", + client->addr, command); + return -1; +} + +static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) +{ + int i; + for (i = 0; i < 3; i++) { + int ret = adv_smbus_read_byte_data_check(client, command, true); + if (ret >= 0) { + if (i) + v4l_err(client, "read ok after %d retries\n", i); + return ret; + } + } + v4l_err(client, "read failed\n"); + return -1; +} + +static int adv7511_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_read_byte_data(client, reg); +} + +static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: i2c write error\n", __func__); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, uint8_t clr_mask, uint8_t val_mask) +{ + adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask); +} + +static int adv_smbus_read_i2c_block_data(struct i2c_client *client, + u8 command, unsigned length, u8 *values) +{ + union i2c_smbus_data data; + int ret; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + + ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + memcpy(values, data.block + 1, length); + return ret; +} + +static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf) +{ + struct adv7511_state *state = get_adv7511_state(sd); + int i; + int err = 0; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) + err = adv_smbus_read_i2c_block_data(state->i2c_edid, i, + I2C_SMBUS_BLOCK_MAX, buf + i); + if (err) + v4l2_err(sd, "%s: i2c read error\n", __func__); +} + +static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd) +{ + return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT; +} + +static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd) +{ + return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT; +} + +static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, uint8_t mode) +{ + adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); +} + +static void adv7511_csc_coeff(struct v4l2_subdev *sd, + u16 A1, u16 A2, u16 A3, u16 A4, + u16 B1, u16 B2, u16 B3, u16 B4, + u16 C1, u16 C2, u16 C3, u16 C4) +{ + /* A */ + adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8); + adv7511_wr(sd, 0x19, A1); + adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8); + adv7511_wr(sd, 0x1B, A2); + adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8); + adv7511_wr(sd, 0x1d, A3); + adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8); + adv7511_wr(sd, 0x1f, A4); + + /* B */ + adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8); + adv7511_wr(sd, 0x21, B1); + adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8); + adv7511_wr(sd, 0x23, B2); + adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8); + adv7511_wr(sd, 0x25, B3); + adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8); + adv7511_wr(sd, 0x27, B4); + + /* C */ + adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8); + adv7511_wr(sd, 0x29, C1); + adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8); + adv7511_wr(sd, 0x2B, C2); + adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8); + adv7511_wr(sd, 0x2D, C3); + adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8); + adv7511_wr(sd, 0x2F, C4); +} + +static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) +{ + if (enable) { + uint8_t csc_mode = 0; + adv7511_csc_conversion_mode(sd, csc_mode); + adv7511_csc_coeff(sd, + 4096-564, 0, 0, 256, + 0, 4096-564, 0, 256, + 0, 0, 4096-564, 256); + /* enable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80); + /* AVI infoframe: Limited range RGB (16-235) */ + adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04); + } else { + /* disable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); + /* AVI infoframe: Full range RGB (0-255) */ + adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08); + } +} + +static void adv7511_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* CEA format, not IT */ + adv7511_wr_and_or(sd, 0x57, 0x7f, 0x00); + } else { + /* IT format */ + adv7511_wr_and_or(sd, 0x57, 0x7f, 0x80); + } +} + +static int adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) +{ + switch (ctrl->val) { + default: + return -EINVAL; + break; + case V4L2_DV_RGB_RANGE_AUTO: { + /* automatic */ + struct adv7511_state *state = get_adv7511_state(sd); + + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* cea format, RGB limited range (16-235) */ + adv7511_csc_rgb_full2limit(sd, true); + } else { + /* not cea format, RGB full range (0-255) */ + adv7511_csc_rgb_full2limit(sd, false); + } + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + adv7511_csc_rgb_full2limit(sd, true); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + adv7511_csc_rgb_full2limit(sd, false); + break; + } + return 0; +} + +/* ------------------------------ CTRL OPS ------------------------------ */ + +static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); + + if (state->hdmi_mode_ctrl == ctrl) { + /* Set HDMI or DVI-D */ + adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); + return 0; + } + if (state->rgb_quantization_range_ctrl == ctrl) + return adv7511_set_rgb_quantization_mode(sd, ctrl); + + return -EINVAL; +} + +static const struct v4l2_ctrl_ops adv7511_ctrl_ops = { + .s_ctrl = adv7511_s_ctrl, +}; + +/* ---------------------------- CORE OPS ------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static void adv7511_inv_register(struct v4l2_subdev *sd) +{ + v4l2_info(sd, "0x000-0x0ff: Main Map\n"); +} + +static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + reg->size = 1; + switch (reg->reg >> 8) { + case 0: + reg->val = adv7511_rd(sd, reg->reg & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7511_inv_register(sd); + break; + } + return 0; +} + +static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + switch (reg->reg >> 8) { + case 0: + adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7511_inv_register(sd); + break; + } + return 0; +} +#endif + +static int adv7511_log_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct adv7511_state_edid *edid = &state->edid; + + static const char * const states[] = { + "in reset", + "reading EDID", + "idle", + "initializing HDCP", + "HDCP enabled", + "initializing HDCP repeater", + "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" + }; + static const char * const errors[] = { + "no error", + "bad receiver BKSV", + "Ri mismatch", + "Pj mismatch", + "i2c error", + "timed out", + "max repeater cascade exceeded", + "hash check failed", + "too many devices", + "9", "A", "B", "C", "D", "E", "F" + }; + + v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); + v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", + (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no", + (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no", + edid->segments ? "found" : "no", + edid->blocks); + v4l2_info(sd, "%s output %s\n", + (adv7511_rd(sd, 0xaf) & 0x02) ? + "HDMI" : "DVI-D", + (adv7511_rd(sd, 0xa1) & 0x3c) ? + "disabled" : "enabled"); + v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", + states[adv7511_rd(sd, 0xc8) & 0xf], + errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter, + adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96)); + v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full"); + if (state->dv_timings.type == V4L2_DV_BT_656_1120) + v4l2_print_dv_timings(sd->name, "timings: ", + &state->dv_timings, false); + else + v4l2_info(sd, "no timings set\n"); + v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr); + v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr); + return 0; +} + +/* Power up/down adv7511 */ +static int adv7511_s_power(struct v4l2_subdev *sd, int on) +{ + struct adv7511_state *state = get_adv7511_state(sd); + const int retries = 20; + int i; + + v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); + + state->power_on = on; + + if (!on) { + /* Power down */ + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); + return true; + } + + /* Power up */ + /* The adv7511 does not always come up immediately. + Retry multiple times. */ + for (i = 0; i < retries; i++) { + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0); + if ((adv7511_rd(sd, 0x41) & 0x40) == 0) + break; + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); + msleep(10); + } + if (i == retries) { + v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__); + adv7511_s_power(sd, 0); + return false; + } + if (i > 1) + v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i); + + /* Reserved registers that must be set */ + adv7511_wr(sd, 0x98, 0x03); + adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70); + adv7511_wr(sd, 0x9c, 0x30); + adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01); + adv7511_wr(sd, 0xa2, 0xa4); + adv7511_wr(sd, 0xa3, 0xa4); + adv7511_wr(sd, 0xe0, 0xd0); + adv7511_wr(sd, 0xf9, 0x00); + + adv7511_wr(sd, 0x43, state->i2c_edid_addr); + + /* Set number of attempts to read the EDID */ + adv7511_wr(sd, 0xc9, 0xf); + return true; +} + +/* Enable interrupts */ +static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable) +{ + uint8_t irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT; + uint8_t irqs_rd; + int retries = 100; + + v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable"); + + /* The datasheet says that the EDID ready interrupt should be + disabled if there is no hotplug. */ + if (!enable) + irqs = 0; + else if (adv7511_have_hotplug(sd)) + irqs |= MASK_ADV7511_EDID_RDY_INT; + + /* + * This i2c write can fail (approx. 1 in 1000 writes). But it + * is essential that this register is correct, so retry it + * multiple times. + * + * Note that the i2c write does not report an error, but the readback + * clearly shows the wrong value. + */ + do { + adv7511_wr(sd, 0x94, irqs); + irqs_rd = adv7511_rd(sd, 0x94); + } while (retries-- && irqs_rd != irqs); + + if (irqs_rd == irqs) + return; + v4l2_err(sd, "Could not set interrupts: hw failure?\n"); +} + +/* Interrupt handler */ +static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + uint8_t irq_status; + + /* disable interrupts to prevent a race condition */ + adv7511_set_isr(sd, false); + irq_status = adv7511_rd(sd, 0x96); + /* clear detected interrupts */ + adv7511_wr(sd, 0x96, irq_status); + + v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status); + + if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT)) + adv7511_check_monitor_present_status(sd); + if (irq_status & MASK_ADV7511_EDID_RDY_INT) + adv7511_check_edid_status(sd); + + /* enable interrupts */ + adv7511_set_isr(sd, true); + + if (handled) + *handled = true; + return 0; +} + +static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if ((edid->blocks == 0) || (edid->blocks > 256)) + return -EINVAL; + if (!edid->edid) + return -EINVAL; + if (!state->edid.segments) { + v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); + return -ENODATA; + } + if (edid->start_block >= state->edid.segments * 2) + return -E2BIG; + if ((edid->blocks + edid->start_block) >= state->edid.segments * 2) + edid->blocks = state->edid.segments * 2 - edid->start_block; + + memcpy(edid->edid, &state->edid.data[edid->start_block * 128], + 128 * edid->blocks); + return 0; +} + +static const struct v4l2_subdev_pad_ops adv7511_pad_ops = { + .get_edid = adv7511_get_edid, +}; + +static const struct v4l2_subdev_core_ops adv7511_core_ops = { + .log_status = adv7511_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7511_g_register, + .s_register = adv7511_s_register, +#endif + .s_power = adv7511_s_power, + .interrupt_service_routine = adv7511_isr, +}; + +/* ------------------------------ VIDEO OPS ------------------------------ */ + +/* Enable/disable adv7511 output */ +static int adv7511_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); + if (enable) { + adv7511_check_monitor_present_status(sd); + } else { + adv7511_s_power(sd, 0); + state->have_monitor = false; + } + return 0; +} + +static int adv7511_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + /* quick sanity check */ + if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL)) + return -EINVAL; + + /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is one of the CEA or DMT timings. */ + v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL); + + timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; + + /* save timings */ + state->dv_timings = *timings; + + /* update quantization range based on new dv_timings */ + adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + /* update AVI infoframe */ + adv7511_set_IT_content_AVI_InfoFrame(sd); + + return 0; +} + +static int adv7511_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (!timings) + return -EINVAL; + + *timings = state->dv_timings; + + return 0; +} + +static int adv7511_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL); +} + +static int adv7511_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + *cap = adv7511_timings_cap; + return 0; +} + +static const struct v4l2_subdev_video_ops adv7511_video_ops = { + .s_stream = adv7511_s_stream, + .s_dv_timings = adv7511_s_dv_timings, + .g_dv_timings = adv7511_g_dv_timings, + .enum_dv_timings = adv7511_enum_dv_timings, + .dv_timings_cap = adv7511_dv_timings_cap, +}; + +/* ------------------------------ AUDIO OPS ------------------------------ */ +static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + if (enable) + adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80); + else + adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40); + + return 0; +} + +static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 N; + + switch (freq) { + case 32000: N = 4096; break; + case 44100: N = 6272; break; + case 48000: N = 6144; break; + case 88200: N = 12544; break; + case 96000: N = 12288; break; + case 176400: N = 25088; break; + case 192000: N = 24576; break; + default: + return -EINVAL; + } + + /* Set N (used with CTS to regenerate the audio clock) */ + adv7511_wr(sd, 0x01, (N >> 16) & 0xf); + adv7511_wr(sd, 0x02, (N >> 8) & 0xff); + adv7511_wr(sd, 0x03, N & 0xff); + + return 0; +} + +static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 i2s_sf; + + switch (freq) { + case 32000: i2s_sf = 0x30; break; + case 44100: i2s_sf = 0x00; break; + case 48000: i2s_sf = 0x20; break; + case 88200: i2s_sf = 0x80; break; + case 96000: i2s_sf = 0xa0; break; + case 176400: i2s_sf = 0xc0; break; + case 192000: i2s_sf = 0xe0; break; + default: + return -EINVAL; + } + + /* Set sampling frequency for I2S audio to 48 kHz */ + adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf); + + return 0; +} + +static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) +{ + /* Only 2 channels in use for application */ + adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1); + /* Speaker mapping */ + adv7511_wr(sd, 0x76, 0x00); + + /* 16 bit audio word length */ + adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02); + + return 0; +} + +static const struct v4l2_subdev_audio_ops adv7511_audio_ops = { + .s_stream = adv7511_s_audio_stream, + .s_clock_freq = adv7511_s_clock_freq, + .s_i2s_clock_freq = adv7511_s_i2s_clock_freq, + .s_routing = adv7511_s_routing, +}; + +/* --------------------- SUBDEV OPS --------------------------------------- */ + +static const struct v4l2_subdev_ops adv7511_ops = { + .core = &adv7511_core_ops, + .pad = &adv7511_pad_ops, + .video = &adv7511_video_ops, + .audio = &adv7511_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ +static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, uint8_t *buf) +{ + if (debug >= lvl) { + int i, j; + v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); + for (i = 0; i < 256; i += 16) { + u8 b[128]; + u8 *bp = b; + if (i == 128) + v4l2_dbg(lvl, debug, sd, "\n"); + for (j = i; j < i + 16; j++) { + sprintf(bp, "0x%02x, ", buf[j]); + bp += 6; + } + bp[0] = '\0'; + v4l2_dbg(lvl, debug, sd, "%s\n", b); + } + } +} + +static void adv7511_edid_handler(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler); + struct v4l2_subdev *sd = &state->sd; + struct adv7511_edid_detect ed; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (adv7511_check_edid_status(sd)) { + /* Return if we received the EDID. */ + return; + } + + if (adv7511_have_hotplug(sd)) { + /* We must retry reading the EDID several times, it is possible + * that initially the EDID couldn't be read due to i2c errors + * (DVI connectors are particularly prone to this problem). */ + if (state->edid.read_retries) { + state->edid.read_retries--; + v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__); + state->have_monitor = false; + adv7511_s_power(sd, false); + adv7511_s_power(sd, true); + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + return; + } + } + + /* We failed to read the EDID, so send an event for this. */ + ed.present = false; + ed.segment = adv7511_rd(sd, 0xc4); + v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); + v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); +} + +static void adv7511_audio_setup(struct v4l2_subdev *sd) +{ + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + adv7511_s_i2s_clock_freq(sd, 48000); + adv7511_s_clock_freq(sd, 48000); + adv7511_s_routing(sd, 0, 0, 0); +} + +/* Configure hdmi transmitter. */ +static void adv7511_setup(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* Input format: RGB 4:4:4 */ + adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0); + /* Output format: RGB 4:4:4 */ + adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0); + /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */ + adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06); + /* Disable pixel repetition */ + adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0); + /* Disable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); + /* Output format: RGB 4:4:4, Active Format Information is valid, + * underscanned */ + adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12); + /* AVI Info frame packet enable, Audio Info frame disable */ + adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10); + /* Colorimetry, Active format aspect ratio: same as picure. */ + adv7511_wr(sd, 0x56, 0xa8); + /* No encryption */ + adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0); + + /* Positive clk edge capture for input video clock */ + adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60); + + adv7511_audio_setup(sd); + + v4l2_ctrl_handler_setup(&state->hdl); +} + +static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd) +{ + struct adv7511_monitor_detect mdt; + struct adv7511_state *state = get_adv7511_state(sd); + + mdt.present = state->have_monitor; + v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt); +} + +static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + /* read hotplug and rx-sense state */ + uint8_t status = adv7511_rd(sd, 0x42); + + v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", + __func__, + status, + status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "", + status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : ""); + + /* update read only ctrls */ + v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + + if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) { + v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__); + if (!state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); + state->have_monitor = true; + adv7511_set_isr(sd, true); + if (!adv7511_s_power(sd, true)) { + v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__); + return; + } + adv7511_setup(sd); + adv7511_notify_monitor_detect(sd); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + } + } else if (status & MASK_ADV7511_HPD_DETECT) { + v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + } else if (!(status & MASK_ADV7511_HPD_DETECT)) { + v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); + if (state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); + state->have_monitor = false; + adv7511_notify_monitor_detect(sd); + } + adv7511_s_power(sd, false); + memset(&state->edid, 0, sizeof(struct adv7511_state_edid)); + } +} + +static bool edid_block_verify_crc(uint8_t *edid_block) +{ + int i; + uint8_t sum = 0; + + for (i = 0; i < 128; i++) + sum += *(edid_block + i); + return (sum == 0); +} + +static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment) +{ + struct adv7511_state *state = get_adv7511_state(sd); + u32 blocks = state->edid.blocks; + uint8_t *data = state->edid.data; + + if (edid_block_verify_crc(&data[segment * 256])) { + if ((segment + 1) * 2 <= blocks) + return edid_block_verify_crc(&data[segment * 256 + 128]); + return true; + } + return false; +} + +static bool adv7511_check_edid_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + uint8_t edidRdy = adv7511_rd(sd, 0xc5); + + v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", + __func__, EDID_MAX_RETRIES - state->edid.read_retries); + + if (state->edid.complete) + return true; + + if (edidRdy & MASK_ADV7511_EDID_RDY) { + int segment = adv7511_rd(sd, 0xc4); + struct adv7511_edid_detect ed; + + if (segment >= EDID_MAX_SEGM) { + v4l2_err(sd, "edid segment number too big\n"); + return false; + } + v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); + adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]); + adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]); + if (segment == 0) { + state->edid.blocks = state->edid.data[0x7e] + 1; + v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks); + } + if (!edid_segment_verify_crc(sd, segment)) { + /* edid crc error, force reread of edid segment */ + v4l2_dbg(1, debug, sd, "%s: edid crc error\n", __func__); + state->have_monitor = false; + adv7511_s_power(sd, false); + adv7511_s_power(sd, true); + return false; + } + /* one more segment read ok */ + state->edid.segments = segment + 1; + if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { + /* Request next EDID segment */ + v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments); + adv7511_wr(sd, 0xc9, 0xf); + adv7511_wr(sd, 0xc4, state->edid.segments); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + return false; + } + + v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments); + state->edid.complete = true; + + /* report when we have all segments + but report only for segment 0 + */ + ed.present = true; + ed.segment = 0; + state->edid_detect_counter++; + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); + return ed.present; + } + + return false; +} + +/* ----------------------------------------------------------------------- */ +/* Setup ADV7511 */ +static void adv7511_init_setup(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct adv7511_state_edid *edid = &state->edid; + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* clear all interrupts */ + adv7511_wr(sd, 0x96, 0xff); + memset(edid, 0, sizeof(struct adv7511_state_edid)); + state->have_monitor = false; + adv7511_set_isr(sd, false); + adv7511_s_stream(sd, false); + adv7511_s_audio_stream(sd, false); +} + +static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct adv7511_state *state; + struct adv7511_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + u8 chip_id[2]; + int err = -EIO; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + /* Platform data */ + if (!pdata) { + v4l_err(client, "No platform data!\n"); + return -ENODEV; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + + v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n", + client->addr << 1); + + v4l2_i2c_subdev_init(sd, client, &adv7511_ops); + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 10); + /* add in ascending ID order */ + state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, + V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, + 0, V4L2_DV_TX_MODE_DVI_D); + state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); + state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); + state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, + V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + goto err_hdl; + } + state->hdmi_mode_ctrl->is_private = true; + state->hotplug_ctrl->is_private = true; + state->rx_sense_ctrl->is_private = true; + state->have_edid0_ctrl->is_private = true; + state->rgb_quantization_range_ctrl->is_private = true; + + state->pad.flags = MEDIA_PAD_FL_SINK; + err = media_entity_init(&sd->entity, 1, &state->pad, 0); + if (err) + goto err_hdl; + + /* EDID and CEC i2c addr */ + state->i2c_edid_addr = state->pdata.i2c_edid << 1; + state->i2c_cec_addr = state->pdata.i2c_cec << 1; + + state->chip_revision = adv7511_rd(sd, 0x0); + chip_id[0] = adv7511_rd(sd, 0xf5); + chip_id[1] = adv7511_rd(sd, 0xf6); + if (chip_id[0] != 0x75 || chip_id[1] != 0x11) { + v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]); + err = -EIO; + goto err_entity; + } + + state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1); + if (state->i2c_edid == NULL) { + v4l2_err(sd, "failed to register edid i2c client\n"); + goto err_entity; + } + + adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */ + state->work_queue = create_singlethread_workqueue(sd->name); + if (state->work_queue == NULL) { + v4l2_err(sd, "could not create workqueue\n"); + goto err_unreg_cec; + } + + INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler); + + adv7511_init_setup(sd); + adv7511_set_isr(sd, true); + adv7511_check_monitor_present_status(sd); + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_unreg_cec: + i2c_unregister_device(state->i2c_edid); +err_entity: + media_entity_cleanup(&sd->entity); +err_hdl: + v4l2_ctrl_handler_free(&state->hdl); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int adv7511_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7511_state *state = get_adv7511_state(sd); + + state->chip_revision = -1; + + v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + adv7511_init_setup(sd); + cancel_delayed_work(&state->edid_handler); + i2c_unregister_device(state->i2c_edid); + destroy_workqueue(state->work_queue); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id adv7511_id[] = { + { "adv7511", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7511_id); + +static struct i2c_driver adv7511_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7511", + }, + .probe = adv7511_probe, + .remove = adv7511_remove, + .id_table = adv7511_id, +}; + +module_i2c_driver(adv7511_driver); |