summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm831x-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/wm831x-core.c')
-rw-r--r--drivers/mfd/wm831x-core.c259
1 files changed, 71 insertions, 188 deletions
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 265f75fc6a25..282e76ab678f 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -295,7 +295,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
goto out;
r &= ~mask;
- r |= val;
+ r |= val & mask;
ret = wm831x_write(wm831x, reg, 2, &r);
@@ -306,146 +306,6 @@ out:
}
EXPORT_SYMBOL_GPL(wm831x_set_bits);
-/**
- * wm831x_auxadc_read: Read a value from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
- int ret, src, irq_masked, timeout;
-
- /* Are we using the interrupt? */
- irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
- irq_masked &= WM831X_AUXADC_DATA_EINT;
-
- mutex_lock(&wm831x->auxadc_lock);
-
- ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
- WM831X_AUX_ENA, WM831X_AUX_ENA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
- goto out;
- }
-
- /* We force a single source at present */
- src = input;
- ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
- 1 << src);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
- goto out;
- }
-
- /* Clear any notification from a very late arriving interrupt */
- try_wait_for_completion(&wm831x->auxadc_done);
-
- ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
- WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
- goto disable;
- }
-
- if (irq_masked) {
- /* If we're not using interrupts then poll the
- * interrupt status register */
- timeout = 5;
- while (timeout) {
- msleep(1);
-
- ret = wm831x_reg_read(wm831x,
- WM831X_INTERRUPT_STATUS_1);
- if (ret < 0) {
- dev_err(wm831x->dev,
- "ISR 1 read failed: %d\n", ret);
- goto disable;
- }
-
- /* Did it complete? */
- if (ret & WM831X_AUXADC_DATA_EINT) {
- wm831x_reg_write(wm831x,
- WM831X_INTERRUPT_STATUS_1,
- WM831X_AUXADC_DATA_EINT);
- break;
- } else {
- dev_err(wm831x->dev,
- "AUXADC conversion timeout\n");
- ret = -EBUSY;
- goto disable;
- }
- }
- } else {
- /* If we are using interrupts then wait for the
- * interrupt to complete. Use an extremely long
- * timeout to handle situations with heavy load where
- * the notification of the interrupt may be delayed by
- * threaded IRQ handling. */
- if (!wait_for_completion_timeout(&wm831x->auxadc_done,
- msecs_to_jiffies(500))) {
- dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
- ret = -EBUSY;
- goto disable;
- }
- }
-
- ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
- } else {
- src = ((ret & WM831X_AUX_DATA_SRC_MASK)
- >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
- if (src == 14)
- src = WM831X_AUX_CAL;
-
- if (src != input) {
- dev_err(wm831x->dev, "Data from source %d not %d\n",
- src, input);
- ret = -EINVAL;
- } else {
- ret &= WM831X_AUX_DATA_MASK;
- }
- }
-
-disable:
- wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
-out:
- mutex_unlock(&wm831x->auxadc_lock);
- return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
-
-static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
-{
- struct wm831x *wm831x = irq_data;
-
- complete(&wm831x->auxadc_done);
-
- return IRQ_HANDLED;
-}
-
-/**
- * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
- int ret;
-
- ret = wm831x_auxadc_read(wm831x, input);
- if (ret < 0)
- return ret;
-
- ret *= 1465;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
-
static struct resource wm831x_dcdc1_resources[] = {
{
.start = WM831X_DC1_CONTROL_1,
@@ -872,6 +732,9 @@ static struct mfd_cell wm8310_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -976,11 +839,6 @@ static struct mfd_cell wm8310_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1028,6 +886,9 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -1108,11 +969,6 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1125,11 +981,6 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_status2_resources,
},
{
- .name = "wm831x-touch",
- .num_resources = ARRAY_SIZE(wm831x_touch_resources),
- .resources = wm831x_touch_resources,
- },
- {
.name = "wm831x-watchdog",
.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
.resources = wm831x_wdt_resources,
@@ -1165,6 +1016,9 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -1269,11 +1123,6 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1286,11 +1135,6 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_status2_resources,
},
{
- .name = "wm831x-touch",
- .num_resources = ARRAY_SIZE(wm831x_touch_resources),
- .resources = wm831x_touch_resources,
- },
- {
.name = "wm831x-watchdog",
.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
.resources = wm831x_wdt_resources,
@@ -1326,6 +1170,9 @@ static struct mfd_cell wm8320_devs[] = {
.resources = wm8320_dcdc4_buck_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-gpio",
.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
.resources = wm831x_gpio_resources,
@@ -1405,11 +1252,6 @@ static struct mfd_cell wm8320_devs[] = {
.resources = wm831x_on_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1428,6 +1270,22 @@ static struct mfd_cell wm8320_devs[] = {
},
};
+static struct mfd_cell touch_devs[] = {
+ {
+ .name = "wm831x-touch",
+ .num_resources = ARRAY_SIZE(wm831x_touch_resources),
+ .resources = wm831x_touch_resources,
+ },
+};
+
+static struct mfd_cell rtc_devs[] = {
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+};
+
static struct mfd_cell backlight_devs[] = {
{
.name = "wm831x-backlight",
@@ -1440,14 +1298,12 @@ static struct mfd_cell backlight_devs[] = {
int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
{
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
- int rev;
+ int rev, wm831x_num;
enum wm831x_parent parent;
int ret, i;
mutex_init(&wm831x->io_lock);
mutex_init(&wm831x->key_lock);
- mutex_init(&wm831x->auxadc_lock);
- init_completion(&wm831x->auxadc_done);
dev_set_drvdata(wm831x->dev, wm831x);
ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
@@ -1592,45 +1448,51 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
}
}
+ /* Multiply by 10 as we have many subdevices of the same type */
+ if (pdata && pdata->wm831x_num)
+ wm831x_num = pdata->wm831x_num * 10;
+ else
+ wm831x_num = -1;
+
ret = wm831x_irq_init(wm831x, irq);
if (ret != 0)
goto err;
- if (wm831x->irq_base) {
- ret = request_threaded_irq(wm831x->irq_base +
- WM831X_IRQ_AUXADC_DATA,
- NULL, wm831x_auxadc_irq, 0,
- "auxadc", wm831x);
- if (ret < 0)
- dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
- ret);
- }
+ wm831x_auxadc_init(wm831x);
/* The core device is up, instantiate the subdevices. */
switch (parent) {
case WM8310:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8310_devs, ARRAY_SIZE(wm8310_devs),
NULL, wm831x->irq_base);
break;
case WM8311:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8311_devs, ARRAY_SIZE(wm8311_devs),
NULL, wm831x->irq_base);
+ if (!pdata || !pdata->disable_touch)
+ mfd_add_devices(wm831x->dev, wm831x_num,
+ touch_devs, ARRAY_SIZE(touch_devs),
+ NULL, wm831x->irq_base);
break;
case WM8312:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8312_devs, ARRAY_SIZE(wm8312_devs),
NULL, wm831x->irq_base);
+ if (!pdata || !pdata->disable_touch)
+ mfd_add_devices(wm831x->dev, wm831x_num,
+ touch_devs, ARRAY_SIZE(touch_devs),
+ NULL, wm831x->irq_base);
break;
case WM8320:
case WM8321:
case WM8325:
case WM8326:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
NULL, wm831x->irq_base);
break;
@@ -1645,9 +1507,30 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
goto err_irq;
}
+ /* The RTC can only be used if the 32.768kHz crystal is
+ * enabled; this can't be controlled by software at runtime.
+ */
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read clock status: %d\n", ret);
+ goto err_irq;
+ }
+
+ if (ret & WM831X_XTAL_ENA) {
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
+ rtc_devs, ARRAY_SIZE(rtc_devs),
+ NULL, wm831x->irq_base);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
+ goto err_irq;
+ }
+ } else {
+ dev_info(wm831x->dev, "32.768kHz clock disabled, no RTC\n");
+ }
+
if (pdata && pdata->backlight) {
/* Treat errors as non-critical */
- ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
ARRAY_SIZE(backlight_devs), NULL,
wm831x->irq_base);
if (ret < 0)