diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api.h | 1773 |
1 files changed, 0 insertions, 1773 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h deleted file mode 100644 index 181590fbd3b3..000000000000 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ /dev/null @@ -1,1773 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ - -#ifndef __fw_api_h__ -#define __fw_api_h__ - -#include "fw-api-rs.h" -#include "fw-api-rx.h" -#include "fw-api-tx.h" -#include "fw-api-sta.h" -#include "fw-api-mac.h" -#include "fw-api-power.h" -#include "fw-api-d3.h" -#include "fw-api-coex.h" -#include "fw-api-scan.h" -#include "fw-api-stats.h" -#include "fw-api-tof.h" - -/* Tx queue numbers */ -enum { - IWL_MVM_OFFCHANNEL_QUEUE = 8, - IWL_MVM_CMD_QUEUE = 9, -}; - -enum iwl_mvm_tx_fifo { - IWL_MVM_TX_FIFO_BK = 0, - IWL_MVM_TX_FIFO_BE, - IWL_MVM_TX_FIFO_VI, - IWL_MVM_TX_FIFO_VO, - IWL_MVM_TX_FIFO_MCAST = 5, - IWL_MVM_TX_FIFO_CMD = 7, -}; - -#define IWL_MVM_STATION_COUNT 16 - -#define IWL_MVM_TDLS_STA_COUNT 4 - -/* commands */ -enum { - MVM_ALIVE = 0x1, - REPLY_ERROR = 0x2, - ECHO_CMD = 0x3, - - INIT_COMPLETE_NOTIF = 0x4, - - /* PHY context commands */ - PHY_CONTEXT_CMD = 0x8, - DBG_CFG = 0x9, - ANTENNA_COUPLING_NOTIFICATION = 0xa, - - /* UMAC scan commands */ - SCAN_ITERATION_COMPLETE_UMAC = 0xb5, - SCAN_CFG_CMD = 0xc, - SCAN_REQ_UMAC = 0xd, - SCAN_ABORT_UMAC = 0xe, - SCAN_COMPLETE_UMAC = 0xf, - - /* station table */ - ADD_STA_KEY = 0x17, - ADD_STA = 0x18, - REMOVE_STA = 0x19, - - /* paging get item */ - FW_GET_ITEM_CMD = 0x1a, - - /* TX */ - TX_CMD = 0x1c, - TXPATH_FLUSH = 0x1e, - MGMT_MCAST_KEY = 0x1f, - - /* scheduler config */ - SCD_QUEUE_CFG = 0x1d, - - /* global key */ - WEP_KEY = 0x20, - - /* Memory */ - SHARED_MEM_CFG = 0x25, - - /* TDLS */ - TDLS_CHANNEL_SWITCH_CMD = 0x27, - TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa, - TDLS_CONFIG_CMD = 0xa7, - - /* MAC and Binding commands */ - MAC_CONTEXT_CMD = 0x28, - TIME_EVENT_CMD = 0x29, /* both CMD and response */ - TIME_EVENT_NOTIFICATION = 0x2a, - BINDING_CONTEXT_CMD = 0x2b, - TIME_QUOTA_CMD = 0x2c, - NON_QOS_TX_COUNTER_CMD = 0x2d, - - LQ_CMD = 0x4e, - - /* paging block to FW cpu2 */ - FW_PAGING_BLOCK_CMD = 0x4f, - - /* Scan offload */ - SCAN_OFFLOAD_REQUEST_CMD = 0x51, - SCAN_OFFLOAD_ABORT_CMD = 0x52, - HOT_SPOT_CMD = 0x53, - SCAN_OFFLOAD_COMPLETE = 0x6D, - SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, - SCAN_OFFLOAD_CONFIG_CMD = 0x6f, - MATCH_FOUND_NOTIFICATION = 0xd9, - SCAN_ITERATION_COMPLETE = 0xe7, - - /* Phy */ - PHY_CONFIGURATION_CMD = 0x6a, - CALIB_RES_NOTIF_PHY_DB = 0x6b, - /* PHY_DB_CMD = 0x6c, */ - - /* ToF - 802.11mc FTM */ - TOF_CMD = 0x10, - TOF_NOTIFICATION = 0x11, - - /* Power - legacy power table command */ - POWER_TABLE_CMD = 0x77, - PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, - LTR_CONFIG = 0xee, - - /* Thermal Throttling*/ - REPLY_THERMAL_MNG_BACKOFF = 0x7e, - - /* Set/Get DC2DC frequency tune */ - DC2DC_CONFIG_CMD = 0x83, - - /* NVM */ - NVM_ACCESS_CMD = 0x88, - - SET_CALIB_DEFAULT_CMD = 0x8e, - - BEACON_NOTIFICATION = 0x90, - BEACON_TEMPLATE_CMD = 0x91, - TX_ANT_CONFIGURATION_CMD = 0x98, - STATISTICS_CMD = 0x9c, - STATISTICS_NOTIFICATION = 0x9d, - EOSP_NOTIFICATION = 0x9e, - REDUCE_TX_POWER_CMD = 0x9f, - - /* RF-KILL commands and notifications */ - CARD_STATE_CMD = 0xa0, - CARD_STATE_NOTIFICATION = 0xa1, - - MISSED_BEACONS_NOTIFICATION = 0xa2, - - /* Power - new power table command */ - MAC_PM_POWER_TABLE = 0xa9, - - MFUART_LOAD_NOTIFICATION = 0xb1, - - REPLY_RX_PHY_CMD = 0xc0, - REPLY_RX_MPDU_CMD = 0xc1, - BA_NOTIF = 0xc5, - - /* Location Aware Regulatory */ - MCC_UPDATE_CMD = 0xc8, - MCC_CHUB_UPDATE_CMD = 0xc9, - - MARKER_CMD = 0xcb, - - /* BT Coex */ - BT_COEX_PRIO_TABLE = 0xcc, - BT_COEX_PROT_ENV = 0xcd, - BT_PROFILE_NOTIFICATION = 0xce, - BT_CONFIG = 0x9b, - BT_COEX_UPDATE_SW_BOOST = 0x5a, - BT_COEX_UPDATE_CORUN_LUT = 0x5b, - BT_COEX_UPDATE_REDUCED_TXP = 0x5c, - BT_COEX_CI = 0x5d, - - REPLY_SF_CFG_CMD = 0xd1, - REPLY_BEACON_FILTERING_CMD = 0xd2, - - /* DTS measurements */ - CMD_DTS_MEASUREMENT_TRIGGER = 0xdc, - DTS_MEASUREMENT_NOTIFICATION = 0xdd, - - REPLY_DEBUG_CMD = 0xf0, - DEBUG_LOG_MSG = 0xf7, - - BCAST_FILTER_CMD = 0xcf, - MCAST_FILTER_CMD = 0xd0, - - /* D3 commands/notifications */ - D3_CONFIG_CMD = 0xd3, - PROT_OFFLOAD_CONFIG_CMD = 0xd4, - OFFLOADS_QUERY_CMD = 0xd5, - REMOTE_WAKE_CONFIG_CMD = 0xd6, - D0I3_END_CMD = 0xed, - - /* for WoWLAN in particular */ - WOWLAN_PATTERNS = 0xe0, - WOWLAN_CONFIGURATION = 0xe1, - WOWLAN_TSC_RSC_PARAM = 0xe2, - WOWLAN_TKIP_PARAM = 0xe3, - WOWLAN_KEK_KCK_MATERIAL = 0xe4, - WOWLAN_GET_STATUSES = 0xe5, - WOWLAN_TX_POWER_PER_DB = 0xe6, - - /* and for NetDetect */ - SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56, - SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58, - SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59, - - REPLY_MAX = 0xff, -}; - -enum iwl_phy_ops_subcmd_ids { - CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0, - DTS_MEASUREMENT_NOTIF_WIDE = 0xFF, -}; - -/* command groups */ -enum { - PHY_OPS_GROUP = 0x4, -}; - -/** - * struct iwl_cmd_response - generic response struct for most commands - * @status: status of the command asked, changes for each one - */ -struct iwl_cmd_response { - __le32 status; -}; - -/* - * struct iwl_tx_ant_cfg_cmd - * @valid: valid antenna configuration - */ -struct iwl_tx_ant_cfg_cmd { - __le32 valid; -} __packed; - -/* - * Calibration control struct. - * Sent as part of the phy configuration command. - * @flow_trigger: bitmap for which calibrations to perform according to - * flow triggers. - * @event_trigger: bitmap for which calibrations to perform according to - * event triggers. - */ -struct iwl_calib_ctrl { - __le32 flow_trigger; - __le32 event_trigger; -} __packed; - -/* This enum defines the bitmap of various calibrations to enable in both - * init ucode and runtime ucode through CALIBRATION_CFG_CMD. - */ -enum iwl_calib_cfg { - IWL_CALIB_CFG_XTAL_IDX = BIT(0), - IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), - IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), - IWL_CALIB_CFG_PAPD_IDX = BIT(3), - IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), - IWL_CALIB_CFG_DC_IDX = BIT(5), - IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), - IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), - IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), - IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), - IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), - IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), - IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), - IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), - IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), - IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), - IWL_CALIB_CFG_DAC_IDX = BIT(16), - IWL_CALIB_CFG_ABS_IDX = BIT(17), - IWL_CALIB_CFG_AGC_IDX = BIT(18), -}; - -/* - * Phy configuration command. - */ -struct iwl_phy_cfg_cmd { - __le32 phy_cfg; - struct iwl_calib_ctrl calib_control; -} __packed; - -#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) -#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) -#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) -#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) -#define PHY_CFG_TX_CHAIN_A BIT(8) -#define PHY_CFG_TX_CHAIN_B BIT(9) -#define PHY_CFG_TX_CHAIN_C BIT(10) -#define PHY_CFG_RX_CHAIN_A BIT(12) -#define PHY_CFG_RX_CHAIN_B BIT(13) -#define PHY_CFG_RX_CHAIN_C BIT(14) - - -/* Target of the NVM_ACCESS_CMD */ -enum { - NVM_ACCESS_TARGET_CACHE = 0, - NVM_ACCESS_TARGET_OTP = 1, - NVM_ACCESS_TARGET_EEPROM = 2, -}; - -/* Section types for NVM_ACCESS_CMD */ -enum { - NVM_SECTION_TYPE_SW = 1, - NVM_SECTION_TYPE_REGULATORY = 3, - NVM_SECTION_TYPE_CALIBRATION = 4, - NVM_SECTION_TYPE_PRODUCTION = 5, - NVM_SECTION_TYPE_MAC_OVERRIDE = 11, - NVM_SECTION_TYPE_PHY_SKU = 12, - NVM_MAX_NUM_SECTIONS = 13, -}; - -/** - * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section - * @op_code: 0 - read, 1 - write - * @target: NVM_ACCESS_TARGET_* - * @type: NVM_SECTION_TYPE_* - * @offset: offset in bytes into the section - * @length: in bytes, to read/write - * @data: if write operation, the data to write. On read its empty - */ -struct iwl_nvm_access_cmd { - u8 op_code; - u8 target; - __le16 type; - __le16 offset; - __le16 length; - u8 data[]; -} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ - -#define NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */ - -/* - * struct iwl_fw_paging_cmd - paging layout - * - * (FW_PAGING_BLOCK_CMD = 0x4f) - * - * Send to FW the paging layout in the driver. - * - * @flags: various flags for the command - * @block_size: the block size in powers of 2 - * @block_num: number of blocks specified in the command. - * @device_phy_addr: virtual addresses from device side -*/ -struct iwl_fw_paging_cmd { - __le32 flags; - __le32 block_size; - __le32 block_num; - __le32 device_phy_addr[NUM_OF_FW_PAGING_BLOCKS]; -} __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_1 */ - -/* - * Fw items ID's - * - * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload - * download - */ -enum iwl_fw_item_id { - IWL_FW_ITEM_ID_PAGING = 3, -}; - -/* - * struct iwl_fw_get_item_cmd - get an item from the fw - */ -struct iwl_fw_get_item_cmd { - __le32 item_id; -} __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */ - -struct iwl_fw_get_item_resp { - __le32 item_id; - __le32 item_byte_cnt; - __le32 item_val; -} __packed; /* FW_GET_ITEM_RSP_S_VER_1 */ - -/** - * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD - * @offset: offset in bytes into the section - * @length: in bytes, either how much was written or read - * @type: NVM_SECTION_TYPE_* - * @status: 0 for success, fail otherwise - * @data: if read operation, the data returned. Empty on write. - */ -struct iwl_nvm_access_resp { - __le16 offset; - __le16 length; - __le16 type; - __le16 status; - u8 data[]; -} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ - -/* MVM_ALIVE 0x1 */ - -/* alive response is_valid values */ -#define ALIVE_RESP_UCODE_OK BIT(0) -#define ALIVE_RESP_RFKILL BIT(1) - -/* alive response ver_type values */ -enum { - FW_TYPE_HW = 0, - FW_TYPE_PROT = 1, - FW_TYPE_AP = 2, - FW_TYPE_WOWLAN = 3, - FW_TYPE_TIMING = 4, - FW_TYPE_WIPAN = 5 -}; - -/* alive response ver_subtype values */ -enum { - FW_SUBTYPE_FULL_FEATURE = 0, - FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ - FW_SUBTYPE_REDUCED = 2, - FW_SUBTYPE_ALIVE_ONLY = 3, - FW_SUBTYPE_WOWLAN = 4, - FW_SUBTYPE_AP_SUBTYPE = 5, - FW_SUBTYPE_WIPAN = 6, - FW_SUBTYPE_INITIALIZE = 9 -}; - -#define IWL_ALIVE_STATUS_ERR 0xDEAD -#define IWL_ALIVE_STATUS_OK 0xCAFE - -#define IWL_ALIVE_FLG_RFKILL BIT(0) - -struct mvm_alive_resp_ver1 { - __le16 status; - __le16 flags; - u8 ucode_minor; - u8 ucode_major; - __le16 id; - u8 api_minor; - u8 api_major; - u8 ver_subtype; - u8 ver_type; - u8 mac; - u8 opt; - __le16 reserved2; - __le32 timestamp; - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 log_event_table_ptr; /* SRAM address for event log */ - __le32 cpu_register_ptr; - __le32 dbgm_config_ptr; - __le32 alive_counter_ptr; - __le32 scd_base_ptr; /* SRAM address for SCD */ -} __packed; /* ALIVE_RES_API_S_VER_1 */ - -struct mvm_alive_resp_ver2 { - __le16 status; - __le16 flags; - u8 ucode_minor; - u8 ucode_major; - __le16 id; - u8 api_minor; - u8 api_major; - u8 ver_subtype; - u8 ver_type; - u8 mac; - u8 opt; - __le16 reserved2; - __le32 timestamp; - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ - __le32 cpu_register_ptr; - __le32 dbgm_config_ptr; - __le32 alive_counter_ptr; - __le32 scd_base_ptr; /* SRAM address for SCD */ - __le32 st_fwrd_addr; /* pointer to Store and forward */ - __le32 st_fwrd_size; - u8 umac_minor; /* UMAC version: minor */ - u8 umac_major; /* UMAC version: major */ - __le16 umac_id; /* UMAC version: id */ - __le32 error_info_addr; /* SRAM address for UMAC error log */ - __le32 dbg_print_buff_addr; -} __packed; /* ALIVE_RES_API_S_VER_2 */ - -struct mvm_alive_resp { - __le16 status; - __le16 flags; - __le32 ucode_minor; - __le32 ucode_major; - u8 ver_subtype; - u8 ver_type; - u8 mac; - u8 opt; - __le32 timestamp; - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ - __le32 cpu_register_ptr; - __le32 dbgm_config_ptr; - __le32 alive_counter_ptr; - __le32 scd_base_ptr; /* SRAM address for SCD */ - __le32 st_fwrd_addr; /* pointer to Store and forward */ - __le32 st_fwrd_size; - __le32 umac_minor; /* UMAC version: minor */ - __le32 umac_major; /* UMAC version: major */ - __le32 error_info_addr; /* SRAM address for UMAC error log */ - __le32 dbg_print_buff_addr; -} __packed; /* ALIVE_RES_API_S_VER_3 */ - -/* Error response/notification */ -enum { - FW_ERR_UNKNOWN_CMD = 0x0, - FW_ERR_INVALID_CMD_PARAM = 0x1, - FW_ERR_SERVICE = 0x2, - FW_ERR_ARC_MEMORY = 0x3, - FW_ERR_ARC_CODE = 0x4, - FW_ERR_WATCH_DOG = 0x5, - FW_ERR_WEP_GRP_KEY_INDX = 0x10, - FW_ERR_WEP_KEY_SIZE = 0x11, - FW_ERR_OBSOLETE_FUNC = 0x12, - FW_ERR_UNEXPECTED = 0xFE, - FW_ERR_FATAL = 0xFF -}; - -/** - * struct iwl_error_resp - FW error indication - * ( REPLY_ERROR = 0x2 ) - * @error_type: one of FW_ERR_* - * @cmd_id: the command ID for which the error occured - * @bad_cmd_seq_num: sequence number of the erroneous command - * @error_service: which service created the error, applicable only if - * error_type = 2, otherwise 0 - * @timestamp: TSF in usecs. - */ -struct iwl_error_resp { - __le32 error_type; - u8 cmd_id; - u8 reserved1; - __le16 bad_cmd_seq_num; - __le32 error_service; - __le64 timestamp; -} __packed; - - -/* Common PHY, MAC and Bindings definitions */ - -#define MAX_MACS_IN_BINDING (3) -#define MAX_BINDINGS (4) -#define AUX_BINDING_INDEX (3) -#define MAX_PHYS (4) - -/* Used to extract ID and color from the context dword */ -#define FW_CTXT_ID_POS (0) -#define FW_CTXT_ID_MSK (0xff << FW_CTXT_ID_POS) -#define FW_CTXT_COLOR_POS (8) -#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS) -#define FW_CTXT_INVALID (0xffffffff) - -#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\ - (_color << FW_CTXT_COLOR_POS)) - -/* Possible actions on PHYs, MACs and Bindings */ -enum { - FW_CTXT_ACTION_STUB = 0, - FW_CTXT_ACTION_ADD, - FW_CTXT_ACTION_MODIFY, - FW_CTXT_ACTION_REMOVE, - FW_CTXT_ACTION_NUM -}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ - -/* Time Events */ - -/* Time Event types, according to MAC type */ -enum iwl_time_event_type { - /* BSS Station Events */ - TE_BSS_STA_AGGRESSIVE_ASSOC, - TE_BSS_STA_ASSOC, - TE_BSS_EAP_DHCP_PROT, - TE_BSS_QUIET_PERIOD, - - /* P2P Device Events */ - TE_P2P_DEVICE_DISCOVERABLE, - TE_P2P_DEVICE_LISTEN, - TE_P2P_DEVICE_ACTION_SCAN, - TE_P2P_DEVICE_FULL_SCAN, - - /* P2P Client Events */ - TE_P2P_CLIENT_AGGRESSIVE_ASSOC, - TE_P2P_CLIENT_ASSOC, - TE_P2P_CLIENT_QUIET_PERIOD, - - /* P2P GO Events */ - TE_P2P_GO_ASSOC_PROT, - TE_P2P_GO_REPETITIVE_NOA, - TE_P2P_GO_CT_WINDOW, - - /* WiDi Sync Events */ - TE_WIDI_TX_SYNC, - - /* Channel Switch NoA */ - TE_CHANNEL_SWITCH_PERIOD, - - TE_MAX -}; /* MAC_EVENT_TYPE_API_E_VER_1 */ - - - -/* Time event - defines for command API v1 */ - -/* - * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. - * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only - * the first fragment is scheduled. - * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only - * the first 2 fragments are scheduled. - * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any - * number of fragments are valid. - * - * Other than the constant defined above, specifying a fragmentation value 'x' - * means that the event can be fragmented but only the first 'x' will be - * scheduled. - */ -enum { - TE_V1_FRAG_NONE = 0, - TE_V1_FRAG_SINGLE = 1, - TE_V1_FRAG_DUAL = 2, - TE_V1_FRAG_ENDLESS = 0xffffffff -}; - -/* If a Time Event can be fragmented, this is the max number of fragments */ -#define TE_V1_FRAG_MAX_MSK 0x0fffffff -/* Repeat the time event endlessly (until removed) */ -#define TE_V1_REPEAT_ENDLESS 0xffffffff -/* If a Time Event has bounded repetitions, this is the maximal value */ -#define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff - -/* Time Event dependencies: none, on another TE, or in a specific time */ -enum { - TE_V1_INDEPENDENT = 0, - TE_V1_DEP_OTHER = BIT(0), - TE_V1_DEP_TSF = BIT(1), - TE_V1_EVENT_SOCIOPATHIC = BIT(2), -}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ - -/* - * @TE_V1_NOTIF_NONE: no notifications - * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start - * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end - * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use - * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. - * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start - * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end - * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. - * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. - * - * Supported Time event notifications configuration. - * A notification (both event and fragment) includes a status indicating weather - * the FW was able to schedule the event or not. For fragment start/end - * notification the status is always success. There is no start/end fragment - * notification for monolithic events. - */ -enum { - TE_V1_NOTIF_NONE = 0, - TE_V1_NOTIF_HOST_EVENT_START = BIT(0), - TE_V1_NOTIF_HOST_EVENT_END = BIT(1), - TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2), - TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3), - TE_V1_NOTIF_HOST_FRAG_START = BIT(4), - TE_V1_NOTIF_HOST_FRAG_END = BIT(5), - TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6), - TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7), -}; /* MAC_EVENT_ACTION_API_E_VER_2 */ - -/* Time event - defines for command API */ - -/* - * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. - * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only - * the first fragment is scheduled. - * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only - * the first 2 fragments are scheduled. - * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any - * number of fragments are valid. - * - * Other than the constant defined above, specifying a fragmentation value 'x' - * means that the event can be fragmented but only the first 'x' will be - * scheduled. - */ -enum { - TE_V2_FRAG_NONE = 0, - TE_V2_FRAG_SINGLE = 1, - TE_V2_FRAG_DUAL = 2, - TE_V2_FRAG_MAX = 0xfe, - TE_V2_FRAG_ENDLESS = 0xff -}; - -/* Repeat the time event endlessly (until removed) */ -#define TE_V2_REPEAT_ENDLESS 0xff -/* If a Time Event has bounded repetitions, this is the maximal value */ -#define TE_V2_REPEAT_MAX 0xfe - -#define TE_V2_PLACEMENT_POS 12 -#define TE_V2_ABSENCE_POS 15 - -/* Time event policy values - * A notification (both event and fragment) includes a status indicating weather - * the FW was able to schedule the event or not. For fragment start/end - * notification the status is always success. There is no start/end fragment - * notification for monolithic events. - * - * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable - * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start - * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end - * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use - * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. - * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start - * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end - * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. - * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. - * @TE_V2_DEP_OTHER: depends on another time event - * @TE_V2_DEP_TSF: depends on a specific time - * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC - * @TE_V2_ABSENCE: are we present or absent during the Time Event. - */ -enum { - TE_V2_DEFAULT_POLICY = 0x0, - - /* notifications (event start/stop, fragment start/stop) */ - TE_V2_NOTIF_HOST_EVENT_START = BIT(0), - TE_V2_NOTIF_HOST_EVENT_END = BIT(1), - TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2), - TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3), - - TE_V2_NOTIF_HOST_FRAG_START = BIT(4), - TE_V2_NOTIF_HOST_FRAG_END = BIT(5), - TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6), - TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7), - T2_V2_START_IMMEDIATELY = BIT(11), - - TE_V2_NOTIF_MSK = 0xff, - - /* placement characteristics */ - TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS), - TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1), - TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2), - - /* are we present or absent during the Time Event. */ - TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS), -}; - -/** - * struct iwl_time_event_cmd_api - configuring Time Events - * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also - * with version 1. determined by IWL_UCODE_TLV_FLAGS) - * ( TIME_EVENT_CMD = 0x29 ) - * @id_and_color: ID and color of the relevant MAC - * @action: action to perform, one of FW_CTXT_ACTION_* - * @id: this field has two meanings, depending on the action: - * If the action is ADD, then it means the type of event to add. - * For all other actions it is the unique event ID assigned when the - * event was added by the FW. - * @apply_time: When to start the Time Event (in GP2) - * @max_delay: maximum delay to event's start (apply time), in TU - * @depends_on: the unique ID of the event we depend on (if any) - * @interval: interval between repetitions, in TU - * @duration: duration of event in TU - * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS - * @max_frags: maximal number of fragments the Time Event can be divided to - * @policy: defines whether uCode shall notify the host or other uCode modules - * on event and/or fragment start and/or end - * using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF - * TE_EVENT_SOCIOPATHIC - * using TE_ABSENCE and using TE_NOTIF_* - */ -struct iwl_time_event_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - __le32 id; - /* MAC_TIME_EVENT_DATA_API_S_VER_2 */ - __le32 apply_time; - __le32 max_delay; - __le32 depends_on; - __le32 interval; - __le32 duration; - u8 repeat; - u8 max_frags; - __le16 policy; -} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */ - -/** - * struct iwl_time_event_resp - response structure to iwl_time_event_cmd - * @status: bit 0 indicates success, all others specify errors - * @id: the Time Event type - * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE - * @id_and_color: ID and color of the relevant MAC - */ -struct iwl_time_event_resp { - __le32 status; - __le32 id; - __le32 unique_id; - __le32 id_and_color; -} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */ - -/** - * struct iwl_time_event_notif - notifications of time event start/stop - * ( TIME_EVENT_NOTIFICATION = 0x2a ) - * @timestamp: action timestamp in GP2 - * @session_id: session's unique id - * @unique_id: unique id of the Time Event itself - * @id_and_color: ID and color of the relevant MAC - * @action: one of TE_NOTIF_START or TE_NOTIF_END - * @status: true if scheduled, false otherwise (not executed) - */ -struct iwl_time_event_notif { - __le32 timestamp; - __le32 session_id; - __le32 unique_id; - __le32 id_and_color; - __le32 action; - __le32 status; -} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */ - - -/* Bindings and Time Quota */ - -/** - * struct iwl_binding_cmd - configuring bindings - * ( BINDING_CONTEXT_CMD = 0x2b ) - * @id_and_color: ID and color of the relevant Binding - * @action: action to perform, one of FW_CTXT_ACTION_* - * @macs: array of MAC id and colors which belong to the binding - * @phy: PHY id and color which belongs to the binding - */ -struct iwl_binding_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - /* BINDING_DATA_API_S_VER_1 */ - __le32 macs[MAX_MACS_IN_BINDING]; - __le32 phy; -} __packed; /* BINDING_CMD_API_S_VER_1 */ - -/* The maximal number of fragments in the FW's schedule session */ -#define IWL_MVM_MAX_QUOTA 128 - -/** - * struct iwl_time_quota_data - configuration of time quota per binding - * @id_and_color: ID and color of the relevant Binding - * @quota: absolute time quota in TU. The scheduler will try to divide the - * remainig quota (after Time Events) according to this quota. - * @max_duration: max uninterrupted context duration in TU - */ -struct iwl_time_quota_data { - __le32 id_and_color; - __le32 quota; - __le32 max_duration; -} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */ - -/** - * struct iwl_time_quota_cmd - configuration of time quota between bindings - * ( TIME_QUOTA_CMD = 0x2c ) - * @quotas: allocations per binding - */ -struct iwl_time_quota_cmd { - struct iwl_time_quota_data quotas[MAX_BINDINGS]; -} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ - - -/* PHY context */ - -/* Supported bands */ -#define PHY_BAND_5 (0) -#define PHY_BAND_24 (1) - -/* Supported channel width, vary if there is VHT support */ -#define PHY_VHT_CHANNEL_MODE20 (0x0) -#define PHY_VHT_CHANNEL_MODE40 (0x1) -#define PHY_VHT_CHANNEL_MODE80 (0x2) -#define PHY_VHT_CHANNEL_MODE160 (0x3) - -/* - * Control channel position: - * For legacy set bit means upper channel, otherwise lower. - * For VHT - bit-2 marks if the control is lower/upper relative to center-freq - * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. - * center_freq - * | - * 40Mhz |_______|_______| - * 80Mhz |_______|_______|_______|_______| - * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| - * code 011 010 001 000 | 100 101 110 111 - */ -#define PHY_VHT_CTRL_POS_1_BELOW (0x0) -#define PHY_VHT_CTRL_POS_2_BELOW (0x1) -#define PHY_VHT_CTRL_POS_3_BELOW (0x2) -#define PHY_VHT_CTRL_POS_4_BELOW (0x3) -#define PHY_VHT_CTRL_POS_1_ABOVE (0x4) -#define PHY_VHT_CTRL_POS_2_ABOVE (0x5) -#define PHY_VHT_CTRL_POS_3_ABOVE (0x6) -#define PHY_VHT_CTRL_POS_4_ABOVE (0x7) - -/* - * @band: PHY_BAND_* - * @channel: channel number - * @width: PHY_[VHT|LEGACY]_CHANNEL_* - * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* - */ -struct iwl_fw_channel_info { - u8 band; - u8 channel; - u8 width; - u8 ctrl_pos; -} __packed; - -#define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) -#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ - (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) -#define PHY_RX_CHAIN_VALID_POS (1) -#define PHY_RX_CHAIN_VALID_MSK \ - (0x7 << PHY_RX_CHAIN_VALID_POS) -#define PHY_RX_CHAIN_FORCE_SEL_POS (4) -#define PHY_RX_CHAIN_FORCE_SEL_MSK \ - (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) -#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) -#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ - (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) -#define PHY_RX_CHAIN_CNT_POS (10) -#define PHY_RX_CHAIN_CNT_MSK \ - (0x3 << PHY_RX_CHAIN_CNT_POS) -#define PHY_RX_CHAIN_MIMO_CNT_POS (12) -#define PHY_RX_CHAIN_MIMO_CNT_MSK \ - (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) -#define PHY_RX_CHAIN_MIMO_FORCE_POS (14) -#define PHY_RX_CHAIN_MIMO_FORCE_MSK \ - (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) - -/* TODO: fix the value, make it depend on firmware at runtime? */ -#define NUM_PHY_CTX 3 - -/* TODO: complete missing documentation */ -/** - * struct iwl_phy_context_cmd - config of the PHY context - * ( PHY_CONTEXT_CMD = 0x8 ) - * @id_and_color: ID and color of the relevant Binding - * @action: action to perform, one of FW_CTXT_ACTION_* - * @apply_time: 0 means immediate apply and context switch. - * other value means apply new params after X usecs - * @tx_param_color: ??? - * @channel_info: - * @txchain_info: ??? - * @rxchain_info: ??? - * @acquisition_data: ??? - * @dsp_cfg_flags: set to 0 - */ -struct iwl_phy_context_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - /* PHY_CONTEXT_DATA_API_S_VER_1 */ - __le32 apply_time; - __le32 tx_param_color; - struct iwl_fw_channel_info ci; - __le32 txchain_info; - __le32 rxchain_info; - __le32 acquisition_data; - __le32 dsp_cfg_flags; -} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ - -/* - * Aux ROC command - * - * Command requests the firmware to create a time event for a certain duration - * and remain on the given channel. This is done by using the Aux framework in - * the FW. - * The command was first used for Hot Spot issues - but can be used regardless - * to Hot Spot. - * - * ( HOT_SPOT_CMD 0x53 ) - * - * @id_and_color: ID and color of the MAC - * @action: action to perform, one of FW_CTXT_ACTION_* - * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the - * event_unique_id should be the id of the time event assigned by ucode. - * Otherwise ignore the event_unique_id. - * @sta_id_and_color: station id and color, resumed during "Remain On Channel" - * activity. - * @channel_info: channel info - * @node_addr: Our MAC Address - * @reserved: reserved for alignment - * @apply_time: GP2 value to start (should always be the current GP2 value) - * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max - * time by which start of the event is allowed to be postponed. - * @duration: event duration in TU To calculate event duration: - * timeEventDuration = min(duration, remainingQuota) - */ -struct iwl_hs20_roc_req { - /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ - __le32 id_and_color; - __le32 action; - __le32 event_unique_id; - __le32 sta_id_and_color; - struct iwl_fw_channel_info channel_info; - u8 node_addr[ETH_ALEN]; - __le16 reserved; - __le32 apply_time; - __le32 apply_time_max_delay; - __le32 duration; -} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ - -/* - * values for AUX ROC result values - */ -enum iwl_mvm_hot_spot { - HOT_SPOT_RSP_STATUS_OK, - HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, - HOT_SPOT_MAX_NUM_OF_SESSIONS, -}; - -/* - * Aux ROC command response - * - * In response to iwl_hs20_roc_req the FW sends this command to notify the - * driver the uid of the timevent. - * - * ( HOT_SPOT_CMD 0x53 ) - * - * @event_unique_id: Unique ID of time event assigned by ucode - * @status: Return status 0 is success, all the rest used for specific errors - */ -struct iwl_hs20_roc_res { - __le32 event_unique_id; - __le32 status; -} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ - -/** - * struct iwl_radio_version_notif - information on the radio version - * ( RADIO_VERSION_NOTIFICATION = 0x68 ) - * @radio_flavor: - * @radio_step: - * @radio_dash: - */ -struct iwl_radio_version_notif { - __le32 radio_flavor; - __le32 radio_step; - __le32 radio_dash; -} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */ - -enum iwl_card_state_flags { - CARD_ENABLED = 0x00, - HW_CARD_DISABLED = 0x01, - SW_CARD_DISABLED = 0x02, - CT_KILL_CARD_DISABLED = 0x04, - HALT_CARD_DISABLED = 0x08, - CARD_DISABLED_MSK = 0x0f, - CARD_IS_RX_ON = 0x10, -}; - -/** - * struct iwl_radio_version_notif - information on the radio version - * ( CARD_STATE_NOTIFICATION = 0xa1 ) - * @flags: %iwl_card_state_flags - */ -struct iwl_card_state_notif { - __le32 flags; -} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ - -/** - * struct iwl_missed_beacons_notif - information on missed beacons - * ( MISSED_BEACONS_NOTIFICATION = 0xa2 ) - * @mac_id: interface ID - * @consec_missed_beacons_since_last_rx: number of consecutive missed - * beacons since last RX. - * @consec_missed_beacons: number of consecutive missed beacons - * @num_expected_beacons: - * @num_recvd_beacons: - */ -struct iwl_missed_beacons_notif { - __le32 mac_id; - __le32 consec_missed_beacons_since_last_rx; - __le32 consec_missed_beacons; - __le32 num_expected_beacons; - __le32 num_recvd_beacons; -} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ - -/** - * struct iwl_mfuart_load_notif - mfuart image version & status - * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) - * @installed_ver: installed image version - * @external_ver: external image version - * @status: MFUART loading status - * @duration: MFUART loading time -*/ -struct iwl_mfuart_load_notif { - __le32 installed_ver; - __le32 external_ver; - __le32 status; - __le32 duration; -} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ - -/** - * struct iwl_set_calib_default_cmd - set default value for calibration. - * ( SET_CALIB_DEFAULT_CMD = 0x8e ) - * @calib_index: the calibration to set value for - * @length: of data - * @data: the value to set for the calibration result - */ -struct iwl_set_calib_default_cmd { - __le16 calib_index; - __le16 length; - u8 data[0]; -} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ - -#define MAX_PORT_ID_NUM 2 -#define MAX_MCAST_FILTERING_ADDRESSES 256 - -/** - * struct iwl_mcast_filter_cmd - configure multicast filter. - * @filter_own: Set 1 to filter out multicast packets sent by station itself - * @port_id: Multicast MAC addresses array specifier. This is a strange way - * to identify network interface adopted in host-device IF. - * It is used by FW as index in array of addresses. This array has - * MAX_PORT_ID_NUM members. - * @count: Number of MAC addresses in the array - * @pass_all: Set 1 to pass all multicast packets. - * @bssid: current association BSSID. - * @addr_list: Place holder for array of MAC addresses. - * IMPORTANT: add padding if necessary to ensure DWORD alignment. - */ -struct iwl_mcast_filter_cmd { - u8 filter_own; - u8 port_id; - u8 count; - u8 pass_all; - u8 bssid[6]; - u8 reserved[2]; - u8 addr_list[0]; -} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ - -#define MAX_BCAST_FILTERS 8 -#define MAX_BCAST_FILTER_ATTRS 2 - -/** - * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet - * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start. - * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e. - * start of ip payload). - */ -enum iwl_mvm_bcast_filter_attr_offset { - BCAST_FILTER_OFFSET_PAYLOAD_START = 0, - BCAST_FILTER_OFFSET_IP_END = 1, -}; - -/** - * struct iwl_fw_bcast_filter_attr - broadcast filter attribute - * @offset_type: &enum iwl_mvm_bcast_filter_attr_offset. - * @offset: starting offset of this pattern. - * @val: value to match - big endian (MSB is the first - * byte to match from offset pos). - * @mask: mask to match (big endian). - */ -struct iwl_fw_bcast_filter_attr { - u8 offset_type; - u8 offset; - __le16 reserved1; - __be32 val; - __be32 mask; -} __packed; /* BCAST_FILTER_ATT_S_VER_1 */ - -/** - * enum iwl_mvm_bcast_filter_frame_type - filter frame type - * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames. - * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames - */ -enum iwl_mvm_bcast_filter_frame_type { - BCAST_FILTER_FRAME_TYPE_ALL = 0, - BCAST_FILTER_FRAME_TYPE_IPV4 = 1, -}; - -/** - * struct iwl_fw_bcast_filter - broadcast filter - * @discard: discard frame (1) or let it pass (0). - * @frame_type: &enum iwl_mvm_bcast_filter_frame_type. - * @num_attrs: number of valid attributes in this filter. - * @attrs: attributes of this filter. a filter is considered matched - * only when all its attributes are matched (i.e. AND relationship) - */ -struct iwl_fw_bcast_filter { - u8 discard; - u8 frame_type; - u8 num_attrs; - u8 reserved1; - struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS]; -} __packed; /* BCAST_FILTER_S_VER_1 */ - -/** - * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration. - * @default_discard: default action for this mac (discard (1) / pass (0)). - * @attached_filters: bitmap of relevant filters for this mac. - */ -struct iwl_fw_bcast_mac { - u8 default_discard; - u8 reserved1; - __le16 attached_filters; -} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */ - -/** - * struct iwl_bcast_filter_cmd - broadcast filtering configuration - * @disable: enable (0) / disable (1) - * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS) - * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER) - * @filters: broadcast filters - * @macs: broadcast filtering configuration per-mac - */ -struct iwl_bcast_filter_cmd { - u8 disable; - u8 max_bcast_filters; - u8 max_macs; - u8 reserved1; - struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS]; - struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER]; -} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */ - -/* - * enum iwl_mvm_marker_id - maker ids - * - * The ids for different type of markers to insert into the usniffer logs - */ -enum iwl_mvm_marker_id { - MARKER_ID_TX_FRAME_LATENCY = 1, -}; /* MARKER_ID_API_E_VER_1 */ - -/** - * struct iwl_mvm_marker - mark info into the usniffer logs - * - * (MARKER_CMD = 0xcb) - * - * Mark the UTC time stamp into the usniffer logs together with additional - * metadata, so the usniffer output can be parsed. - * In the command response the ucode will return the GP2 time. - * - * @dw_len: The amount of dwords following this byte including this byte. - * @marker_id: A unique marker id (iwl_mvm_marker_id). - * @reserved: reserved. - * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC - * @metadata: additional meta data that will be written to the unsiffer log - */ -struct iwl_mvm_marker { - u8 dwLen; - u8 markerId; - __le16 reserved; - __le64 timestamp; - __le32 metadata[0]; -} __packed; /* MARKER_API_S_VER_1 */ - -/* - * enum iwl_dc2dc_config_id - flag ids - * - * Ids of dc2dc configuration flags - */ -enum iwl_dc2dc_config_id { - DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ - DCDC_FREQ_TUNE_SET = 0x2, -}; /* MARKER_ID_API_E_VER_1 */ - -/** - * struct iwl_dc2dc_config_cmd - configure dc2dc values - * - * (DC2DC_CONFIG_CMD = 0x83) - * - * Set/Get & configure dc2dc values. - * The command always returns the current dc2dc values. - * - * @flags: set/get dc2dc - * @enable_low_power_mode: not used. - * @dc2dc_freq_tune0: frequency divider - digital domain - * @dc2dc_freq_tune1: frequency divider - analog domain - */ -struct iwl_dc2dc_config_cmd { - __le32 flags; - __le32 enable_low_power_mode; /* not used */ - __le32 dc2dc_freq_tune0; - __le32 dc2dc_freq_tune1; -} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ - -/** - * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd - * - * Current dc2dc values returned by the FW. - * - * @dc2dc_freq_tune0: frequency divider - digital domain - * @dc2dc_freq_tune1: frequency divider - analog domain - */ -struct iwl_dc2dc_config_resp { - __le32 dc2dc_freq_tune0; - __le32 dc2dc_freq_tune1; -} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ - -/*********************************** - * Smart Fifo API - ***********************************/ -/* Smart Fifo state */ -enum iwl_sf_state { - SF_LONG_DELAY_ON = 0, /* should never be called by driver */ - SF_FULL_ON, - SF_UNINIT, - SF_INIT_OFF, - SF_HW_NUM_STATES -}; - -/* Smart Fifo possible scenario */ -enum iwl_sf_scenario { - SF_SCENARIO_SINGLE_UNICAST, - SF_SCENARIO_AGG_UNICAST, - SF_SCENARIO_MULTICAST, - SF_SCENARIO_BA_RESP, - SF_SCENARIO_TX_RESP, - SF_NUM_SCENARIO -}; - -#define SF_TRANSIENT_STATES_NUMBER 2 /* SF_LONG_DELAY_ON and SF_FULL_ON */ -#define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ - -/* smart FIFO default values */ -#define SF_W_MARK_SISO 6144 -#define SF_W_MARK_MIMO2 8192 -#define SF_W_MARK_MIMO3 6144 -#define SF_W_MARK_LEGACY 4096 -#define SF_W_MARK_SCAN 4096 - -/* SF Scenarios timers for default configuration (aligned to 32 uSec) */ -#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ -#define SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ - -/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */ -#define SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ -#define SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ -#define SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ -#define SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ -#define SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ -#define SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ -#define SF_BA_IDLE_TIMER 320 /* 300 uSec */ -#define SF_BA_AGING_TIMER 2016 /* 2 mSec */ -#define SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ -#define SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ - -#define SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ - -#define SF_CFG_DUMMY_NOTIF_OFF BIT(16) - -/** - * Smart Fifo configuration command. - * @state: smart fifo state, types listed in enum %iwl_sf_sate. - * @watermark: Minimum allowed availabe free space in RXF for transient state. - * @long_delay_timeouts: aging and idle timer values for each scenario - * in long delay state. - * @full_on_timeouts: timer values for each scenario in full on state. - */ -struct iwl_sf_cfg_cmd { - __le32 state; - __le32 watermark[SF_TRANSIENT_STATES_NUMBER]; - __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; - __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; -} __packed; /* SF_CFG_API_S_VER_2 */ - -/*********************************** - * Location Aware Regulatory (LAR) API - MCC updates - ***********************************/ - -/** - * struct iwl_mcc_update_cmd - Request the device to update geographic - * regulatory profile according to the given MCC (Mobile Country Code). - * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. - * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the - * MCC in the cmd response will be the relevant MCC in the NVM. - * @mcc: given mobile country code - * @source_id: the source from where we got the MCC, see iwl_mcc_source - * @reserved: reserved for alignment - */ -struct iwl_mcc_update_cmd { - __le16 mcc; - u8 source_id; - u8 reserved; -} __packed; /* LAR_UPDATE_MCC_CMD_API_S */ - -/** - * iwl_mcc_update_resp - response to MCC_UPDATE_CMD. - * Contains the new channel control profile map, if changed, and the new MCC - * (mobile country code). - * The new MCC may be different than what was requested in MCC_UPDATE_CMD. - * @status: see &enum iwl_mcc_update_status - * @mcc: the new applied MCC - * @cap: capabilities for all channels which matches the MCC - * @source_id: the MCC source, see iwl_mcc_source - * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 - * channels, depending on platform) - * @channels: channel control data map, DWORD for each channel. Only the first - * 16bits are used. - */ -struct iwl_mcc_update_resp { - __le32 status; - __le16 mcc; - u8 cap; - u8 source_id; - __le32 n_channels; - __le32 channels[0]; -} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S */ - -/** - * struct iwl_mcc_chub_notif - chub notifies of mcc change - * (MCC_CHUB_UPDATE_CMD = 0xc9) - * The Chub (Communication Hub, CommsHUB) is a HW component that connects to - * the cellular and connectivity cores that gets updates of the mcc, and - * notifies the ucode directly of any mcc change. - * The ucode requests the driver to request the device to update geographic - * regulatory profile according to the given MCC (Mobile Country Code). - * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. - * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the - * MCC in the cmd response will be the relevant MCC in the NVM. - * @mcc: given mobile country code - * @source_id: identity of the change originator, see iwl_mcc_source - * @reserved1: reserved for alignment - */ -struct iwl_mcc_chub_notif { - u16 mcc; - u8 source_id; - u8 reserved1; -} __packed; /* LAR_MCC_NOTIFY_S */ - -enum iwl_mcc_update_status { - MCC_RESP_NEW_CHAN_PROFILE, - MCC_RESP_SAME_CHAN_PROFILE, - MCC_RESP_INVALID, - MCC_RESP_NVM_DISABLED, - MCC_RESP_ILLEGAL, - MCC_RESP_LOW_PRIORITY, -}; - -enum iwl_mcc_source { - MCC_SOURCE_OLD_FW = 0, - MCC_SOURCE_ME = 1, - MCC_SOURCE_BIOS = 2, - MCC_SOURCE_3G_LTE_HOST = 3, - MCC_SOURCE_3G_LTE_DEVICE = 4, - MCC_SOURCE_WIFI = 5, - MCC_SOURCE_RESERVED = 6, - MCC_SOURCE_DEFAULT = 7, - MCC_SOURCE_UNINITIALIZED = 8, - MCC_SOURCE_GET_CURRENT = 0x10 -}; - -/* DTS measurements */ - -enum iwl_dts_measurement_flags { - DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0), - DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1), -}; - -/** - * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements - * - * @flags: indicates which measurements we want as specified in &enum - * iwl_dts_measurement_flags - */ -struct iwl_dts_measurement_cmd { - __le32 flags; -} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */ - -/** -* enum iwl_dts_control_measurement_mode - DTS measurement type -* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read -* back (latest value. Not waiting for new value). Use automatic -* SW DTS configuration. -* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings, -* trigger DTS reading and provide read back temperature read -* when available. -* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read -* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result, -* without measurement trigger. -*/ -enum iwl_dts_control_measurement_mode { - DTS_AUTOMATIC = 0, - DTS_REQUEST_READ = 1, - DTS_OVER_WRITE = 2, - DTS_DIRECT_WITHOUT_MEASURE = 3, -}; - -/** -* enum iwl_dts_used - DTS to use or used for measurement in the DTS request -* @DTS_USE_TOP: Top -* @DTS_USE_CHAIN_A: chain A -* @DTS_USE_CHAIN_B: chain B -* @DTS_USE_CHAIN_C: chain C -* @XTAL_TEMPERATURE - read temperature from xtal -*/ -enum iwl_dts_used { - DTS_USE_TOP = 0, - DTS_USE_CHAIN_A = 1, - DTS_USE_CHAIN_B = 2, - DTS_USE_CHAIN_C = 3, - XTAL_TEMPERATURE = 4, -}; - -/** -* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode -* @DTS_BIT6_MODE: bit 6 mode -* @DTS_BIT8_MODE: bit 8 mode -*/ -enum iwl_dts_bit_mode { - DTS_BIT6_MODE = 0, - DTS_BIT8_MODE = 1, -}; - -/** - * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements - * @control_mode: see &enum iwl_dts_control_measurement_mode - * @temperature: used when over write DTS mode is selected - * @sensor: set temperature sensor to use. See &enum iwl_dts_used - * @avg_factor: average factor to DTS in request DTS read mode - * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode - * @step_duration: step duration for the DTS - */ -struct iwl_ext_dts_measurement_cmd { - __le32 control_mode; - __le32 temperature; - __le32 sensor; - __le32 avg_factor; - __le32 bit_mode; - __le32 step_duration; -} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */ - -/** - * iwl_dts_measurement_notif - notification received with the measurements - * - * @temp: the measured temperature - * @voltage: the measured voltage - */ -struct iwl_dts_measurement_notif { - __le32 temp; - __le32 voltage; -} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S */ - -/*********************************** - * TDLS API - ***********************************/ - -/* Type of TDLS request */ -enum iwl_tdls_channel_switch_type { - TDLS_SEND_CHAN_SW_REQ = 0, - TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH, - TDLS_MOVE_CH, -}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ - -/** - * Switch timing sub-element in a TDLS channel-switch command - * @frame_timestamp: GP2 timestamp of channel-switch request/response packet - * received from peer - * @max_offchan_duration: What amount of microseconds out of a DTIM is given - * to the TDLS off-channel communication. For instance if the DTIM is - * 200TU and the TDLS peer is to be given 25% of the time, the value - * given will be 50TU, or 50 * 1024 if translated into microseconds. - * @switch_time: switch time the peer sent in its channel switch timing IE - * @switch_timout: switch timeout the peer sent in its channel switch timing IE - */ -struct iwl_tdls_channel_switch_timing { - __le32 frame_timestamp; /* GP2 time of peer packet Rx */ - __le32 max_offchan_duration; /* given in micro-seconds */ - __le32 switch_time; /* given in micro-seconds */ - __le32 switch_timeout; /* given in micro-seconds */ -} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */ - -#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 - -/** - * TDLS channel switch frame template - * - * A template representing a TDLS channel-switch request or response frame - * - * @switch_time_offset: offset to the channel switch timing IE in the template - * @tx_cmd: Tx parameters for the frame - * @data: frame data - */ -struct iwl_tdls_channel_switch_frame { - __le32 switch_time_offset; - struct iwl_tx_cmd tx_cmd; - u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE]; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ - -/** - * TDLS channel switch command - * - * The command is sent to initiate a channel switch and also in response to - * incoming TDLS channel-switch request/response packets from remote peers. - * - * @switch_type: see &enum iwl_tdls_channel_switch_type - * @peer_sta_id: station id of TDLS peer - * @ci: channel we switch to - * @timing: timing related data for command - * @frame: channel-switch request/response template, depending to switch_type - */ -struct iwl_tdls_channel_switch_cmd { - u8 switch_type; - __le32 peer_sta_id; - struct iwl_fw_channel_info ci; - struct iwl_tdls_channel_switch_timing timing; - struct iwl_tdls_channel_switch_frame frame; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ - -/** - * TDLS channel switch start notification - * - * @status: non-zero on success - * @offchannel_duration: duration given in microseconds - * @sta_id: peer currently performing the channel-switch with - */ -struct iwl_tdls_channel_switch_notif { - __le32 status; - __le32 offchannel_duration; - __le32 sta_id; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ - -/** - * TDLS station info - * - * @sta_id: station id of the TDLS peer - * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx - * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer - * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise - */ -struct iwl_tdls_sta_info { - u8 sta_id; - u8 tx_to_peer_tid; - __le16 tx_to_peer_ssn; - __le32 is_initiator; -} __packed; /* TDLS_STA_INFO_VER_1 */ - -/** - * TDLS basic config command - * - * @id_and_color: MAC id and color being configured - * @tdls_peer_count: amount of currently connected TDLS peers - * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx - * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP - * @sta_info: per-station info. Only the first tdls_peer_count entries are set - * @pti_req_data_offset: offset of network-level data for the PTI template - * @pti_req_tx_cmd: Tx parameters for PTI request template - * @pti_req_template: PTI request template data - */ -struct iwl_tdls_config_cmd { - __le32 id_and_color; /* mac id and color */ - u8 tdls_peer_count; - u8 tx_to_ap_tid; - __le16 tx_to_ap_ssn; - struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT]; - - __le32 pti_req_data_offset; - struct iwl_tx_cmd pti_req_tx_cmd; - u8 pti_req_template[0]; -} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ - -/** - * TDLS per-station config information from FW - * - * @sta_id: station id of the TDLS peer - * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to - * the peer - */ -struct iwl_tdls_config_sta_info_res { - __le16 sta_id; - __le16 tx_to_peer_last_seq; -} __packed; /* TDLS_STA_INFO_RSP_VER_1 */ - -/** - * TDLS config information from FW - * - * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP - * @sta_info: per-station TDLS config information - */ -struct iwl_tdls_config_res { - __le32 tx_to_ap_last_seq; - struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT]; -} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */ - -#define TX_FIFO_MAX_NUM 8 -#define RX_FIFO_MAX_NUM 2 - -/** - * Shared memory configuration information from the FW - * - * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not - * accessible) - * @shared_mem_size: shared memory size - * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to - * 0x0 as accessible only via DBGM RDAT) - * @sample_buff_size: internal sample buff size - * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre - * 8000 HW set to 0x0 as not accessible) - * @txfifo_size: size of TXF0 ... TXF7 - * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0 - * @page_buff_addr: used by UMAC and performance debug (page miss analysis), - * when paging is not supported this should be 0 - * @page_buff_size: size of %page_buff_addr - */ -struct iwl_shared_mem_cfg { - __le32 shared_mem_addr; - __le32 shared_mem_size; - __le32 sample_buff_addr; - __le32 sample_buff_size; - __le32 txfifo_addr; - __le32 txfifo_size[TX_FIFO_MAX_NUM]; - __le32 rxfifo_size[RX_FIFO_MAX_NUM]; - __le32 page_buff_addr; - __le32 page_buff_size; -} __packed; /* SHARED_MEM_ALLOC_API_S_VER_1 */ - -#endif /* __fw_api_h__ */ |