diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 274 |
1 files changed, 271 insertions, 3 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index ab47c4679640..1611c57a6fdf 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.11 + * mpi2_cnfg.h Version: 02.00.12 * * Version History * --------------- @@ -100,6 +100,13 @@ * Added expander reduced functionality data to SAS * Expander Page 0. * Added SAS PHY Page 2 and SAS PHY Page 3. + * 07-30-09 02.00.12 Added IO Unit Page 7. + * Added new device ids. + * Added SAS IO Unit Page 5. + * Added partial and slumber power management capable flags + * to SAS Device Page 0 Flags field. + * Added PhyInfo defines for power condition. + * Added Ethernet configuration pages. * -------------------------------------------------------------------------- */ @@ -182,6 +189,7 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) +#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) /***************************************************************************** @@ -268,6 +276,14 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) +/* Ethernet PageAddress format */ +#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) +#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) + +#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) + + + /**************************************************************************** * Configuration messages ****************************************************************************/ @@ -349,6 +365,15 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) +#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) +#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) +#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) +#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) +#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) +#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) +#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087) + /* Manufacturing Page 0 */ @@ -787,6 +812,56 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) +/* IO Unit Page 7 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Reserved1; /* 0x04 */ + U8 PCIeWidth; /* 0x06 */ + U8 PCIeSpeed; /* 0x07 */ + U32 ProcessorState; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 IOCTemperature; /* 0x10 */ + U8 IOCTemperatureUnits; /* 0x12 */ + U8 IOCSpeed; /* 0x13 */ + U32 Reserved3; /* 0x14 */ +} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, + Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; + +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00) + +/* defines for IO Unit Page 7 PCIeWidth field */ +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) + +/* defines for IO Unit Page 7 PCIeSpeed field */ +#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) + +/* defines for IO Unit Page 7 ProcessorState field */ +#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) +#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) + +#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) +#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) + +/* defines for IO Unit Page 7 IOCTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) + +/* defines for IO Unit Page 7 IOCSpeed field */ +#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) +#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) +#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) +#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) + + + /**************************************************************************** * IOC Config Pages ****************************************************************************/ @@ -1470,6 +1545,12 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 /* values for PhyInfo fields */ #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) + +#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) + #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) @@ -1682,11 +1763,11 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 /* values for SAS IO Unit Page 1 PortFlags */ #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) -/* values for SAS IO Unit Page 2 PhyFlags */ +/* values for SAS IO Unit Page 1 PhyFlags */ #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) -/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +/* values for SAS IO Unit Page 1 MaxMinLinkRate */ #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) @@ -1745,6 +1826,74 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) +/* SAS IO Unit Page 5 */ + +typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { + U8 ControlFlags; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 InactivityTimerExponent; /* 0x02 */ + U8 SATAPartialTimeout; /* 0x04 */ + U8 Reserved2; /* 0x05 */ + U8 SATASlumberTimeout; /* 0x06 */ + U8 Reserved3; /* 0x07 */ + U8 SASPartialTimeout; /* 0x08 */ + U8 Reserved4; /* 0x09 */ + U8 SASSlumberTimeout; /* 0x0A */ + U8 Reserved5; /* 0x0B */ +} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t; + +/* defines for ControlFlags field */ +#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) +#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) +#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) +#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) + +/* defines for InactivityTimerExponent field */ +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) + +#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) +#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) +#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) +#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) +#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) +#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT5_PHY_MAX +#define MPI2_SAS_IOUNIT5_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x08 */ + U8 Reserved1; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ + MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings + [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_5, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, + Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; + +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00) + + + + /**************************************************************************** * SAS Expander Config Pages ****************************************************************************/ @@ -1927,6 +2076,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ /* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) +#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) @@ -2343,5 +2494,122 @@ typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) +/**************************************************************************** +* Ethernet Config Pages +****************************************************************************/ + +/* Ethernet Page 0 */ + +/* IP address (union of IPv4 and IPv6) */ +typedef union _MPI2_ETHERNET_IP_ADDR { + U32 IPv4Addr; + U32 IPv6Addr[4]; +} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR, + Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t; + +#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumInterfaces; /* 0x08 */ + U8 Reserved0; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Status; /* 0x0C */ + U8 MediaState; /* 0x10 */ + U8 Reserved2; /* 0x11 */ + U16 Reserved3; /* 0x12 */ + U8 MacAddress[6]; /* 0x14 */ + U8 Reserved4; /* 0x1A */ + U8 Reserved5; /* 0x1B */ + MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */ + MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */ + MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */ + MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */ + MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */ + MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */ + U8 HostName + [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0, + Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t; + +#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) + +/* values for Ethernet Page 0 Status field */ +#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) +#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) +#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) +#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) +#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) +#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) +#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) +#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) +#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) +#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) + +/* values for Ethernet Page 0 MediaState field */ +#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) +#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) +#define MPI2_ETHPG0_MS_10MBIT (0x01) +#define MPI2_ETHPG0_MS_100MBIT (0x02) +#define MPI2_ETHPG0_MS_1GBIT (0x03) + + +/* Ethernet Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved0; /* 0x08 */ + U32 Flags; /* 0x0C */ + U8 MediaState; /* 0x10 */ + U8 Reserved1; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 MacAddress[6]; /* 0x14 */ + U8 Reserved3; /* 0x1A */ + U8 Reserved4; /* 0x1B */ + MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */ + MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */ + MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */ + MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */ + MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */ + U32 Reserved5; /* 0x6C */ + U32 Reserved6; /* 0x70 */ + U32 Reserved7; /* 0x74 */ + U32 Reserved8; /* 0x78 */ + U8 HostName + [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1, + Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t; + +#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) + +/* values for Ethernet Page 1 Flags field */ +#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) +#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) +#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) +#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) +#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) + +/* values for Ethernet Page 1 MediaState field */ +#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) +#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) +#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) +#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) +#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) + + #endif |