summaryrefslogtreecommitdiff
path: root/sound/isa/sscape.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/isa/sscape.c')
-rw-r--r--sound/isa/sscape.c113
1 files changed, 8 insertions, 105 deletions
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 48a16d865834..bc449166d18d 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -129,9 +129,6 @@ enum GA_REG {
#define DMA_8BIT 0x80
-#define AD1845_FREQ_SEL_MSB 0x16
-#define AD1845_FREQ_SEL_LSB 0x17
-
enum card_type {
SSCAPE,
SSCAPE_PNP,
@@ -955,82 +952,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l
/*
- * Override for the CS4231 playback format function.
- * The AD1845 has much simpler format and rate selection.
- */
-static void ad1845_playback_format(struct snd_wss *chip,
- struct snd_pcm_hw_params *params,
- unsigned char format)
-{
- unsigned long flags;
- unsigned rate = params_rate(params);
-
- /*
- * The AD1845 can't handle sample frequencies
- * outside of 4 kHZ to 50 kHZ
- */
- if (rate > 50000)
- rate = 50000;
- else if (rate < 4000)
- rate = 4000;
-
- spin_lock_irqsave(&chip->reg_lock, flags);
-
- /*
- * Program the AD1845 correctly for the playback stream.
- * Note that we do NOT need to toggle the MCE bit because
- * the PLAYBACK_ENABLE bit of the Interface Configuration
- * register is set.
- *
- * NOTE: We seem to need to write to the MSB before the LSB
- * to get the correct sample frequency.
- */
- snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0));
- snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
- snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
-
- spin_unlock_irqrestore(&chip->reg_lock, flags);
-}
-
-/*
- * Override for the CS4231 capture format function.
- * The AD1845 has much simpler format and rate selection.
- */
-static void ad1845_capture_format(struct snd_wss *chip,
- struct snd_pcm_hw_params *params,
- unsigned char format)
-{
- unsigned long flags;
- unsigned rate = params_rate(params);
-
- /*
- * The AD1845 can't handle sample frequencies
- * outside of 4 kHZ to 50 kHZ
- */
- if (rate > 50000)
- rate = 50000;
- else if (rate < 4000)
- rate = 4000;
-
- spin_lock_irqsave(&chip->reg_lock, flags);
-
- /*
- * Program the AD1845 correctly for the playback stream.
- * Note that we do NOT need to toggle the MCE bit because
- * the CAPTURE_ENABLE bit of the Interface Configuration
- * register is set.
- *
- * NOTE: We seem to need to write to the MSB before the LSB
- * to get the correct sample frequency.
- */
- snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0));
- snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
- snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
-
- spin_unlock_irqrestore(&chip->reg_lock, flags);
-}
-
-/*
* Create an AD1845 PCM subdevice on the SoundScape. The AD1845
* is very much like a CS4231, with a few extra bits. We will
* try to support at least some of the extra bits by overriding
@@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
unsigned long flags;
struct snd_pcm *pcm;
-#define AD1845_FREQ_SEL_ENABLE 0x08
-
-#define AD1845_PWR_DOWN_CTRL 0x1b
-#define AD1845_CRYS_CLOCK_SEL 0x1d
-
/*
* It turns out that the PLAYBACK_ENABLE bit is set
* by the lowlevel driver ...
@@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
*/
if (sscape->type != SSCAPE_VIVO) {
- int val;
/*
* The input clock frequency on the SoundScape must
* be 14.31818 MHz, because we must set this register
@@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
*/
snd_wss_mce_up(chip);
spin_lock_irqsave(&chip->reg_lock, flags);
- snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20);
+ snd_wss_out(chip, AD1845_CLOCK, 0x20);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_wss_mce_down(chip);
- /*
- * More custom configuration:
- * a) select "mode 2" and provide a current drive of 8mA
- * b) enable frequency selection (for capture/playback)
- */
- spin_lock_irqsave(&chip->reg_lock, flags);
- snd_wss_out(chip, CS4231_MISC_INFO,
- CS4231_MODE2 | 0x10);
- val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL);
- snd_wss_out(chip, AD1845_PWR_DOWN_CTRL,
- val | AD1845_FREQ_SEL_ENABLE);
- spin_unlock_irqrestore(&chip->reg_lock, flags);
}
err = snd_wss_pcm(chip, 0, &pcm);
@@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
"for AD1845 chip\n");
goto _error;
}
- err = snd_wss_timer(chip, 0, NULL);
- if (err < 0) {
- snd_printk(KERN_ERR "sscape: No timer device "
- "for AD1845 chip\n");
- goto _error;
+ if (chip->hardware != WSS_HW_AD1848) {
+ err = snd_wss_timer(chip, 0, NULL);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sscape: No timer device "
+ "for AD1845 chip\n");
+ goto _error;
+ }
}
if (sscape->type != SSCAPE_VIVO) {
@@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
"MIDI mixer control\n");
goto _error;
}
- chip->set_playback_format = ad1845_playback_format;
- chip->set_capture_format = ad1845_capture_format;
}
strcpy(card->driver, "SoundScape");