summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
Commit message (Collapse)AuthorAgeFilesLines
* drm/amdgpu: change gfx 11.0.4 external_id rangeYifan Zhang2023-05-111-1/+1
| | | | | | | | | | | | gfx 11.0.4 range starts from 0x80. Fixes: 311d52367d0a ("drm/amdgpu: add soc21 common ip block support for GC 11.0.4") Cc: stable@vger.kernel.org Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reported-by: Yogesh Mohan Marimuthu <Yogesh.Mohanmarimuthu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amdgpu/jpeg: Remove harvest checking for JPEG3Saleemkhan Jamadar2023-05-111-0/+1
| | | | | | | | | Register CC_UVD_HARVESTING is obsolete for JPEG 3.1.2 Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
* drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx rasGuchun Chen2023-05-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking) Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amd/pm: avoid potential UBSAN issue on legacy asicsGuchun Chen2023-05-111-2/+7
| | | | | | | | | | | | | | | Prevent further dpm casting on legacy asics without od_enabled in amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain in init sequence. v2: add a macro to check legacy dpm instead of checking asic family/type v3: refine macro name for naming consistency Suggested-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspendGuchun Chen2023-05-111-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini, driver unconditionally disables ecc_irq which is only enabled on those asics enabling sdma ecc. This will introduce a warning in suspend cycle on those chips with sdma ip v4.0, while without sdma ecc. So this patch correct this. [ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246 [ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000 [ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000 [ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006 [ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390 [ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.167041] Call Trace: [ 7283.167046] <TASK> [ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu] [ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.169464] pci_pm_freeze+0x54/0xc0 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)Lin.Cao2023-05-111-1/+5
| | | | | | | | | | | | | v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we should set shadow as vmbo->shadow to recover vmbo->bo v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow) continue; Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lin.Cao <lincao12@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcsHoratio Zhang2023-05-112-49/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still use amdgpu_irq_put to disable this interrupt, which caused the call trace in this function. [ 102.873958] Call Trace: [ 102.873959] <TASK> [ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu] [ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.874375] process_one_work+0x21f/0x3f0 [ 102.874377] worker_thread+0x200/0x3e0 [ 102.874378] ? process_one_work+0x3f0/0x3f0 [ 102.874379] kthread+0xfd/0x130 [ 102.874380] ? kthread_complete_and_exit+0x20/0x20 [ 102.874381] ret_from_fork+0x22/0x30 v2: - Handle umc and gfx ras cases in separated patch - Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11 v3: - Improve the subject and code comments - Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init v4: - Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state - Check cp_ecc_error_irq.funcs rather than ip version for a more sustainable life v5: - Simplify judgment conditions Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modesAlvin Lee2023-05-112-2/+4
| | | | | | | | | | | | | | | | | | | | | [Description] - Due to bandwidth / arbitration issues at 200Mhz DCFCLK, we want to enforce minimum 60us of prefetch to avoid intermittent underflow issues - Since 60us prefetch is already enforced for UCLK DPM0, and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in theory there should not be any UCLK DPM regressions by enforcing greater prefetch Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add symclk workaround during disable link outputLeo Chen2023-05-113-1/+68
| | | | | | | | | | | | | | [Why & How] This is originally a change (9c75891f) in DCN32 because of the lack of interface to set TX while keeping symclk on. Adding this workaround to DCN314 will resolve the current issue. Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/pm: parse pp_handle under appropriate conditionsGuchun Chen2023-05-111-7/+13
| | | | | | | | | | | | | | | | | amdgpu_dpm_is_overdrive_supported is a common API across all asics, so we should cast pp_handle into correct structure under different power frameworks. v2: using return directly to simplify code v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541 Fixes: eb4900aa4c49 ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions") Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amdgpu: set gfx9 onwards APU atomics support to be trueYifan Zhang2023-05-111-0/+6
| | | | | | | | | | | | APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather it is internal path w/ native atomic support. Set have_atomics_support to true. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amdgpu/nv: update VCN 3 max HEVC encoding resolutionThong Thai2023-05-111-6/+16
| | | | | | | | | | | | | Update the maximum resolution reported for HEVC encoding on VCN 3 devices to reflect its 8K encoding capability. v2: Also update the max height for H.264 encoding to match spec. (Ruijing) Signed-off-by: Thong Thai <thong.thai@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2023-05-0543-225/+378
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...
| * drm/amdgpu: drop redundant sched job cleanup when cs is abortedGuchun Chen2023-05-031-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once command submission failed due to userptr invalidation in amdgpu_cs_submit, legacy code will perform cleanup of scheduler job. However, it's not needed at all, as former commit has integrated job cleanup stuff into amdgpu_job_free. Otherwise, because of double free, a NULL pointer dereference will occur in such scenario. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amd/display: filter out invalid bits in pipe_fusesSamson Tam2023-05-032-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Reading pipe_fuses from register may have invalid bits set, which may affect the num_pipes erroneously. [How] Add read_pipes_fuses() call and filter bits based on expected number of pipes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
| * drm/amd/display: Change default Z8 watermark valuesLeo Chen2023-05-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why & How] Previous Z8 watermark values were causing flickering and OTC underflow. Updating Z8 watermark values based on the measurement. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOVHorace Chen2023-05-031-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | [Why] This WPTR_POLL_ENABLE is a hardware contigious polling which will cause FCLK and UCLK to keep on a high level. Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by firmware. So to save power, SR-IOV also needs to disable this bit Signed-off-by: Horace Chen <horace.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: add a missing lock for AMDGPU_SCHEDChia-I Wu2023-05-031-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | mgr->ctx_handles should be protected by mgr->lock. v2: improve commit message v3: add a Fixes tag Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()Hamza Mahfooz2023-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it from gmc_v9_0_hw_fini(). Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_finiHoratio Zhang2023-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset") Cc: stable@vger.kernel.org
| * drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_finiHoratio Zhang2023-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v11_0_hw_fini, which also leads to the call trace. [ 102.980303] Call Trace: [ 102.980303] <TASK> [ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu] [ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.980740] process_one_work+0x21f/0x3f0 [ 102.980741] worker_thread+0x200/0x3e0 [ 102.980742] ? process_one_work+0x3f0/0x3f0 [ 102.980743] kthread+0xfd/0x130 [ 102.980743] ? kthread_complete_and_exit+0x20/0x20 [ 102.980744] ret_from_fork+0x22/0x30 Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset") Cc: stable@vger.kernel.org
| * drm/amdgpu: Enable doorbell selfring after resize FB BARShane Xiao2023-05-033-30/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The selfring doorbell aperture will change when resize FB BAR successfully during gmc sw init, we should reorder the sequence of enabling doorbell selfring aperture. [How] Move enable_doorbell_selfring_aperture from *_common_hw_init to *_common_late_init. This fixes the potential issue that GPU ring its own doorbell when this device is in translated mode when iommu is on. v2: Remove *_enable_doorbell_aperture functions (Christian) v3: Add comments to note that why we need enable doorbell selfring late (Christian) Signed-off-by: Shane Xiao <shane.xiao@amd.com> Signed-off-by: Aaron Liu <aaron.liu@amd.com> Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Christian K�nig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: Use the default reset when loading or reloading the driverlyndonli2023-05-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Below call trace and errors are observed when reloading amdgpu driver with the module parameter reset_method=3. It should do a default reset when loading or reloading the driver, regardless of the module parameter reset_method. v2: add comments inside and modify commit messages. [ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed and response status is (0x0) [ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc [ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed! [ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off. [ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu] [ +0.000004] Call Trace: [ +0.000003] <TASK> [ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm] [ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm] [ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu] [ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu] [ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu] [ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu] [ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu] [ +0.001071] ? do_pci_enable_device+0xe1/0x110 [ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu] [ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu] Signed-off-by: lyndonli <Lyndon.Li@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: Fix mode2 reset for sienna cichlidlyndonli2023-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Before this change, sienna_cichlid_get_reset_handler will always return NULL, although the module parameter reset_method is 3 when loading amdgpu driver. Signed-off-by: lyndonli <Lyndon.Li@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Lowering min Z8 residency timeLeo Chen2023-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why & How] Per HW team request, we're lowering the minimum Z8 residency time to 2000us. This enables Z8 support for additional modes we were previously blocking like 2k>60hz Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fix flickering caused by S/G modeHamza Mahfooz2023-04-261-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, on a handful of ASICs. We allow the framebuffer for a given plane to exist in either VRAM or GTT. However, if the plane's new framebuffer is in a different memory domain than it's previous framebuffer, flipping between them can cause the screen to flicker. So, to fix this, don't perform an immediate flip in the aforementioned case. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Reviewed-by: Roman Li <Roman.Li@amd.com> Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Set min_width and min_height capability for DCN30Igor Kravchenko2023-04-261-1/+3
| | | | | | | | | | | | | | | | | | | | Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Isolate remaining FPU code in DCN32Jasdeep Dhillon2023-04-262-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DCN32 resource contains code that uses FPU. [How] Moved code into DCN32 FPU Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Update bounding box values for DCN321Aurabindo Pillai2023-04-261-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | [Why&how] Update bounding box values as per hardware spec Fixes: 197485c69543 ("drm/amd/display: Create dcn321_fpu file") Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Do not clear GPINT register when releasing DMUB from resetAurabindo Pillai2023-04-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | [Why & How] There's no need to clear GPINT register for DMUB when releasing it from reset. Fix that. Fixes: ac2e555e0a7f ("drm/amd/display: Add DMCUB source files and changes for DCN32/321") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Reset OUTBOX0 r/w pointer on DMUB resetCruise Hung2023-04-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | [Why & How] We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset. Fix it. Fixes: 6ecf9773a503 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)") Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Fixes for dcn32_clk_mgr implementationAurabindo Pillai2023-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | [Why&How] Fix CLK MGR early initialization and add logging. Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reviewed-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Disable migration to ensure consistency of per-CPU variableTianci Yin2023-04-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] Since the variable fpu_recursion_depth is per-CPU type, it has one copy on each CPU, thread migration causes data consistency issue, then the call trace shows up. And preemption disabling can't prevent migration. [how] Disable migration to ensure consistency of fpu_recursion_depth. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: remove incorrect early returnAurabindo Pillai2023-04-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | [Why&How] Remove incorrect early return in a device specific fifo reset workaround Reviewed-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Return error code on DSC atomic check failureHersen Wu2023-04-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | [Why&How] We were not returning -EINVAL on DSC atomic check fail. Add it. Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Improvement for handling edp link training failsJingwen Zhu2023-04-262-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The eDP retrain will cause the DPCD 300 to be reset to default. And cause the brightness can't be set correctly. [How] delete the call to edp panel power control in both enable_link_output/disable_link_output entirely and only call edp panel control in enable_link_dp and  disable_link_dp once. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Apply correct panel mode when reinitializing hardwareMichael Mityushkin2023-04-263-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When link training during engine recovery, ASSR might fail causing panel mode to be reset to default. This should not happen for eDP as it will prevent the panel from turning back on. [How] Added dp_panel_mode to struct dc_link to remember previously applied panel mode. Do not reset panel mode to default while performing link training if previously used panel mode = eDP. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fix access hdcp_workqueue assertHersen Wu2023-04-262-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] hdcp are enabled for asics from raven. for old asics which hdcp are not enabled, hdcp_workqueue are null. some access to hdcp work queue are not guarded with pointer check. [How] add hdcp_workqueue pointer check before access workqueue. Fixes: 82986fd631fa ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444 Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amd/display: Reduce SubVP + DRR stretch marginAlvin Lee2023-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Description] - Having excessively large margin causes failure in the static schedulability check in some cases for SubVP + DRR - 100us of DRR margin is sufficient based on a weeks worth of stress testing on different display configs Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fix memleak in aconnector->timing_requestedHersen Wu2023-04-261-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] when amdgpu_dm_update_connector_after_detect is called two times successively with valid sink, memory allocated of aconnector->timing_requested for the first call is not free. this causes memeleak. [How] allocate memory only when aconnector->timing_requested is null. Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Fix hang when skipping modesetAurabindo Pillai2023-04-262-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: allow edp updates for virtual signalAlex Hung2023-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the request because virtual signal is not in dc_is_audio_capable_signal function. [How] Includes SIGNAL_TYPE_VIRTUAL as audio capable. Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: copy dmub caps to dc on dcn31Josip Pavic2023-04-261-0/+4
| | | | | | | | | | | | | | | | | | | | [Why & How] Add code path to copy dmub caps to dc, which is missing on dcn31 Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Add missing WA and MCLK validationRodrigo Siqueira2023-04-263-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | When the commit fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP") was merged, we missed some parts associated with the MCLK switch. This commit adds all the missing parts. Fixes: fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers2023-04-262-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Do not set drr on pipe commitWesley Chalmers2023-04-262-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: set variable dccg314_init storage-class-specifier to staticTom Rix2023-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | smatch reports drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol 'dccg314_init' was not declared. Should it be static? This variable is only used in one file so should be static. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Use pointer in the memcpyRodrigo Siqueira2023-04-181-1/+1
| | | | | | | | | | | | | | Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Remove wrong assignment of DP link rateRodrigo Siqueira2023-04-181-1/+0
| | | | | | | | | | | | | | Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Set dp_rate to dm_dp_rate_na by defaultRodrigo Siqueira2023-04-181-2/+1
| | | | | | | | | | | | | | Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
View Lorry Controller Status