1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
Motorola CPCAP PMIC battery charger binding
Required properties:
- compatible: Shall be "motorola,mapphone-cpcap-charger"
- interrupts: Interrupt specifier for each name in interrupt-names
- interrupt-names: Should contain the following entries:
"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
- io-channels: IIO ADC channel specifier for each name in io-channel-names
- io-channel-names: Should contain the following entries:
"battdetb", "battp", "vbus", "chg_isense", "batti"
Optional properties:
- mode-gpios: Optionally CPCAP charger can have a companion wireless
charge controller that is controlled with two GPIOs
that are active low.
Example:
cpcap_charger: charger {
compatible = "motorola,mapphone-cpcap-charger";
interrupts-extended = <
&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
>;
interrupt-names =
"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
&gpio3 23 GPIO_ACTIVE_LOW>;
io-channels = <&cpcap_adc 0 &cpcap_adc 1
&cpcap_adc 2 &cpcap_adc 5
&cpcap_adc 6>;
io-channel-names = "battdetb", "battp",
"vbus", "chg_isense",
"batti";
};
|
