1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PING: ultrasonic sensor for distance measuring by using only one GPIOs
*
* Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
*
* For details about the devices see:
* http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
* http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
*
* the measurement cycle as timing diagram looks like:
*
* GPIO ___ ________________________
* ping: __/ \____________/ \________________
* ^ ^ ^ ^
* |<->| interrupt interrupt
* udelay(5) (ts_rising) (ts_falling)
* |<---------------------->|
* . pulse time measured .
* . --> one round trip of ultra sonic waves
* ultra . .
* sonic _ _ _. .
* burst: _________/ \_/ \_/ \_________________________________________
* .
* ultra .
* sonic _ _ _.
* echo: __________________________________/ \_/ \_/ \________________
*/
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
struct ping_cfg {
unsigned long trigger_pulse_us; /* length of trigger pulse */
int laserping_error; /* support error code in */
/* pulse width of laser */
/* ping sensors */
s64 timeout_ns; /* timeout in ns */
};
struct ping_data {
struct device *dev;
struct gpio_desc *gpiod_ping;
struct mutex lock;
int irqnr;
ktime_t ts_rising;
ktime_t ts_falling;
struct completion rising;
struct completion falling;
const struct ping_cfg *cfg;
};
static const struct ping_cfg pa_ping_cfg = {
.trigger_pulse_us = 5,
.laserping_error = 0,
.timeout_ns = 18500000, /* 3 meters */
};
static const struct ping_cfg pa_laser_ping_cfg = {
.trigger_pulse_us = 5,
.laserping_error = 1,
.timeout_ns = 15500000, /* 2 meters plus error codes */
};
static irqreturn_t ping_handle_irq(int irq, void *dev_id)
{
struct iio_dev *indio_dev = dev_id;
struct ping_data *data = iio_priv(indio_dev);
ktime_t now = ktime_get();
if (gpiod_get_value(data->gpiod_ping)) {
data->ts_rising = now;
complete(&data->rising);
} else {
data->ts_falling = now;
complete(&data->falling);
}
return IRQ_HANDLED;
}
static int ping_read(struct ping_data *data)
{
int ret;
ktime_t ktime_dt;
s64 dt_ns;
u32 time_ns, distance_mm;
struct platform_device *pdev = to_platform_device(data->dev);
struct iio_dev *indio_dev = iio_priv_to_dev(data);
/*
* just one read-echo-cycle can take place at a time
* ==> lock against concurrent reading calls
*/
mutex_lock(&data->lock);
reinit_completion(&data->rising);
reinit_completion(&data->falling);
gpiod_set_value(data->gpiod_ping, 1);
udelay(data->cfg->trigger_pulse_us);
gpiod_set_value(data->gpiod_ping, 0);
ret = gpiod_direction_input(data->gpiod_ping);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
}
data->irqnr = gpiod_to_irq(data->gpiod_ping);
if (data->irqnr < 0) {
dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
mutex_unlock(&data->lock);
return data->irqnr;
}
ret = request_irq(data->irqnr, ping_handle_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
pdev->name, indio_dev);
if (ret < 0) {
dev_err(data->dev, "request_irq: %d\n", ret);
mutex_unlock(&data->lock);
return ret;
}
/* it should not take more than 20 ms until echo is rising */
ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
if (ret < 0)
goto err_reset_direction;
else if (ret == 0) {
ret = -ETIMEDOUT;
goto err_reset_direction;
}
/* it cannot take more than 50 ms until echo is falling */
ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
if (ret < 0)
goto err_reset_direction;
else if (ret == 0) {
ret = -ETIMEDOUT;
goto err_reset_direction;
}
ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
free_irq(data->irqnr, indio_dev);
ret = gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
}
mutex_unlock(&data->lock);
dt_ns = ktime_to_ns(ktime_dt);
if (dt_ns > data->cfg->timeout_ns) {
dev_dbg(data->dev, "distance out of range: dt=%lldns\n",
dt_ns);
return -EIO;
}
time_ns = dt_ns;
/*
* read error code of laser ping sensor and give users chance to
* figure out error by using dynamic debuggging
*/
if (data->cfg->laserping_error) {
if ((time_ns > 12500000) && (time_ns <= 13500000)) {
dev_dbg(data->dev, "target too close or to far\n");
return -EIO;
}
if ((time_ns > 13500000) && (time_ns <= 14500000)) {
dev_dbg(data->dev, "internal sensor error\n");
return -EIO;
}
if ((time_ns > 14500000) && (time_ns <= 15500000)) {
dev_dbg(data->dev, "internal sensor timeout\n");
return -EIO;
}
}
/*
* the speed as function of the temperature is approximately:
*
* speed = 331,5 + 0,6 * Temp
* with Temp in °C
* and speed in m/s
*
* use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
* temperature
*
* therefore:
* time 343,5 time * 232
* distance = ------ * ------- = ------------
* 10^6 2 1350800
* with time in ns
* and distance in mm (one way)
*
* because we limit to 3 meters the multiplication with 232 just
* fits into 32 bit
*/
distance_mm = time_ns * 232 / 1350800;
return distance_mm;
err_reset_direction:
free_irq(data->irqnr, indio_dev);
mutex_unlock(&data->lock);
if (gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW))
dev_dbg(data->dev, "error in gpiod_direction_output\n");
return ret;
}
static int ping_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long info)
{
struct ping_data *data = iio_priv(indio_dev);
int ret;
if (channel->type != IIO_DISTANCE)
return -EINVAL;
switch (info) {
case IIO_CHAN_INFO_RAW:
ret = ping_read(data);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/*
* maximum resolution in datasheet is 1 mm
* 1 LSB is 1 mm
*/
*val = 0;
*val2 = 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static const struct iio_info ping_iio_info = {
.read_raw = ping_read_raw,
};
static const struct iio_chan_spec ping_chan_spec[] = {
{
.type = IIO_DISTANCE,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
},
};
static const struct of_device_id of_ping_match[] = {
{ .compatible = "parallax,ping", .data = &pa_ping_cfg},
{ .compatible = "parallax,laserping", .data = &pa_ping_cfg},
{},
};
MODULE_DEVICE_TABLE(of, of_ping_match);
static int ping_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ping_data *data;
struct iio_dev *indio_dev;
indio_dev = devm_iio_device_alloc(dev, sizeof(struct ping_data));
if (!indio_dev) {
dev_err(dev, "failed to allocate IIO device\n");
return -ENOMEM;
}
data = iio_priv(indio_dev);
data->dev = dev;
data->cfg = of_device_get_match_data(dev);
mutex_init(&data->lock);
init_completion(&data->rising);
init_completion(&data->falling);
data->gpiod_ping = devm_gpiod_get(dev, "ping", GPIOD_OUT_LOW);
if (IS_ERR(data->gpiod_ping)) {
dev_err(dev, "failed to get ping-gpios: err=%ld\n",
PTR_ERR(data->gpiod_ping));
return PTR_ERR(data->gpiod_ping);
}
if (gpiod_cansleep(data->gpiod_ping)) {
dev_err(data->dev, "cansleep-GPIOs not supported\n");
return -ENODEV;
}
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = "ping";
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &ping_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ping_chan_spec;
indio_dev->num_channels = ARRAY_SIZE(ping_chan_spec);
return devm_iio_device_register(dev, indio_dev);
}
static struct platform_driver ping_driver = {
.probe = ping_probe,
.driver = {
.name = "ping-gpio",
.of_match_table = of_ping_match,
},
};
module_platform_driver(ping_driver);
MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
MODULE_DESCRIPTION("PING sensors for distance measuring using one GPIOs");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ping");
|