configs: Bulk config recovery from archive.org (Part 1)

This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

13 files changed, 1075 insertions, 0 deletions

diff --git a/configs/Abit/AA8-DuraMAX.conf b/configs/Abit/AA8-DuraMAX.conf
new file mode 100644
index 00000000..05ab62d2
--- /dev/null
+++ b/configs/Abit/AA8-DuraMAX.conf
@@ -0,0 +1,68 @@
+# lm_sensors configuration file for the Abit AA8-DuraMAX motherboard
+# 2006-06-07, Hans de Goede <j.w.r.degoede@hhs.nl>
+# Comments welcome!
+
+
+chip "abituguru-*"
+
+
+### Voltages
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+   compute in3 @*4.153 , @/4.153
+
+   label in4 "FSB VTT Voltage"
+
+   label in5 "NB Voltage"
+
+   label in6 "NB 2.5V Voltage"
+
+   label in7 "ATX +5V"
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V"
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"
+   compute in9 @*1.788 , @/1.788 
+
+   ignore in10
+
+
+### Temperatures
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM Temperature 1"
+
+   label temp4 "PWM Temperature 2"
+
+   ignore temp5
+   ignore temp6
+   ignore temp7
+
+
+### Fans
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX1 FAN Speed"
+
+   label fan5 "AUX2 FAN Speed"
+
+   ignore fan6
diff --git a/configs/Abit/AA8XE-Fatal1ty.conf b/configs/Abit/AA8XE-Fatal1ty.conf
new file mode 100644
index 00000000..ac3aa935
--- /dev/null
+++ b/configs/Abit/AA8XE-Fatal1ty.conf
@@ -0,0 +1,159 @@
+# lm_sensors configuration file for the Abit AA8XE-Fatal1ty motherboard
+
+# 2006-05-29, Author: Roger Lucas <roger@planbit.co.uk>
+
+# Please send comments to: <j.w.r.degoede@hhs.nl>
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "DDR VTT Voltage"
+
+   label in1 "CPU Core Voltage"
+
+   label in2 "Unknown Voltage" 
+
+   label in3 "DDR Voltage"
+
+   label in4 "NB Voltage" 
+
+   label in5 "Unknown Voltage"
+
+   label in6 "FSB VTT Voltage"
+
+   label in7 "NB 2.5V Voltage"
+
+   ignore in8
+
+   ignore in9
+
+   ignore in10
+
+   ignore in11
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM#1 Temperature"
+
+   label temp4 "PWM#2 Temperature"
+
+   label temp5 "PWM#3 Temperature"
+
+   label temp6 "PWM#4 Temperature"
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed" 
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "OTES1 FAN Speed"
+
+   label fan5 "OTES2 FAN Speed"
+
+   ignore fan6
+
+
+
+
+
+# The AA8XE Fatal1ty motherboard also contains a w83627hf which is used to
+
+# measure the ATX power supply rails. Below is the correct config for this
+
+
+
+chip "w83782d-*" "w83627hf-*"
+
+
+
+   ignore in0
+
+   ignore in1
+
+   label in2 "ATX +3.3V" 
+
+   label in3 "ATX +5V"   
+
+   label in4 "ATX +12V"  
+
+   ignore in5
+
+   ignore in6
+
+   label in7 "Standby Voltage (+5V)"
+
+   ignore in8
+
+
+
+   compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
+
+   compute in4 ((28/10)+1)*@  ,  @/((28/10)+1) 
+
+   compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
+
+
+
+   set in2_min 3.3 * 0.95
+
+   set in2_max 3.3 * 1.05
+
+   set in3_min 5.0 * 0.95
+
+   set in3_max 5.0 * 1.05
+
+   set in4_min 12 * 0.90 
+
+   set in4_max 12 * 1.10 
+
+   set in7_min 5 * 0.95  
+
+   set in7_max 5 * 1.05  
+
+
+
+   ignore fan1
+
+   ignore fan2
+
+   ignore fan3
+
+
+
+   ignore temp1
+
+   ignore temp2
+
+   ignore temp3
+
+
+
+   ignore vid
+
+   ignore alarms
+
+   ignore beep_enable
diff --git a/configs/Abit/AI7.conf b/configs/Abit/AI7.conf
new file mode 100644
index 00000000..930c1107
--- /dev/null
+++ b/configs/Abit/AI7.conf
@@ -0,0 +1,83 @@
+# This configuration is derived from the AN7 configuration and currently
+# untested, it should work fine though. Please send any success or failure
+# using this config to: Hans de Goede <j.w.r.degoede@…>.
+
+# Notice that this motherboard contains version 1 of the uGuru. This version
+# does not seem to properly support autodetecting the type of the bank1
+# sensors, nor does the autodetection of the number of fan sensors work
+# properly on this chip. 
+
+
+# lm_sensors configuration file for the Abit AI7 motherboard
+# 2006-06-24, Hans de Goede <j.w.r.degoede@hhs.nl>
+# Comments welcome!
+# Note it might be nessecaryto load the driver with the following params:
+# bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 fan_sensors=5
+
+chip "abituguru-*"
+
+
+### Voltages
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+   compute in3 @*4.153 , @/4.153
+
+   # I believe this is FSB VTT, in some Abit files its called GMCHVTT, below is the BIOS name
+   label in4 "AUXC Voltage"  
+
+   label in5 "NB Core Voltage"
+
+   label in6 "VCCVID Voltage"
+
+   label in7 "ATX +5V Voltage"
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V Voltage"
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"   
+   compute in9 @*1.788 , @/1.788
+
+   label in10 "3VDUAL Voltage"
+   compute in10 @*1.248 , @/1.248
+
+
+### Temperatures
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "System Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+### Fans
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "FAN4"
+
+   label fan5 "FAN5"
+
+   ignore fan6
diff --git a/configs/Abit/AN7.conf b/configs/Abit/AN7.conf
new file mode 100644
index 00000000..df84d69b
--- /dev/null
+++ b/configs/Abit/AN7.conf
@@ -0,0 +1,79 @@
+# Notice that this was the first motherboard by Abit with the uGuru and thus
+# contains version 1 of the uGuru. This version does not seem to properly
+# support autodetecting the type of the bank1 sensors, nor does the
+# autodetection of the number of fan sensors work properly on this chip.
+
+
+# lm_sensors configuration file for the Abit AN7 motherboard
+# 2006-06-24, Hans de Goede <j.w.r.degoede@hhs.nl>
+# Comments welcome!
+# Note the driver MUST be loaded with the following params:
+# bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 fan_sensors=5
+
+chip "abituguru-*"
+
+
+### Voltages
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+   compute in3 @*4.153 , @/4.153
+
+   # I believe this is FSB VTT, in some Abit files its called GMCHVTT, below is the BIOS name
+   label in4 "AUXC Voltage"  
+
+   label in5 "NB Core Voltage"
+
+   label in6 "AGP VDDQ Voltage"
+
+   label in7 "ATX +5V Voltage"
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V Voltage"
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"   
+   compute in9 @*1.788 , @/1.788
+
+   label in10 "3VDUAL Voltage"
+   compute in10 @*1.248 , @/1.248
+
+
+### Temperatures
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "System Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+### Fans
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "FAN4"
+
+   label fan5 "FAN5"
+
+   ignore fan6
diff --git a/configs/Abit/AN8-SLI.conf b/configs/Abit/AN8-SLI.conf
new file mode 100644
index 00000000..f970939b
--- /dev/null
+++ b/configs/Abit/AN8-SLI.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit AN8-SLI motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "nForce4 Standby Voltage"
+
+   label in4 "CPU VDDA 2.5V Voltage"  
+
+   label in5 "HyperTransport Voltage" 
+
+   label in6 "nForce4 Voltage"
+
+   label in7 "ATX +5V"
+
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V"
+
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "ATX 5VSB Voltage" 
+
+   compute in9 @*1.788 , @/1.788
+
+   label in10 "ATX +12V"
+
+   compute in10 @*4.153 , @/4.153
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM Temperature" 
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NF4 FAN Speed"
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "OTES1 FAN Speed"
+
+   label fan5 "OTES2 FAN Speed"
+
+   label fan6 "AUX FAN Speed"
diff --git a/configs/Abit/AV8.conf b/configs/Abit/AV8.conf
new file mode 100644
index 00000000..2e610f7f
--- /dev/null
+++ b/configs/Abit/AV8.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit AV8 motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "NB Voltage"
+
+   label in4 "SB Voltage"
+
+   label in5 "HyperTransport Voltage"
+
+   label in6 "AGP VDDQ Voltage"
+
+   label in7 "ATX +5V"
+
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V"
+
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"
+
+   compute in9 @*1.788 , @/1.788 
+
+   label in10 "3VDual Voltage"   
+
+   compute in10 @*1.248 , @/1.248
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX1 FAN Speed"
+
+   label fan5 "AUX2 FAN Speed"
+
+   ignore fan6
diff --git a/configs/Abit/AX8.conf b/configs/Abit/AX8.conf
new file mode 100644
index 00000000..8d89e111
--- /dev/null
+++ b/configs/Abit/AX8.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit AX8 motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "NB Voltage"
+
+   label in4 "SB Voltage"
+
+   label in5 "HyperTransport Voltage"
+
+   label in6 "ATX +5V"
+
+   compute in6 @*1.788 , @/1.788
+
+   label in7 "ATX +3.3V"
+
+   compute in7 @*1.248 , @/1.248
+
+   label in8 "Standby Voltage (+5V)"
+
+   compute in8 @*1.788 , @/1.788
+
+   label in9 "ATX +12V"
+
+   compute in9 @*4.153 , @/4.153
+
+   ignore in10
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX FAN Speed"
+
+   ignore fan5
+
+   ignore fan6
diff --git a/configs/Abit/Aa7-Max.conf b/configs/Abit/Aa7-Max.conf
new file mode 100644
index 00000000..6ff3833e
--- /dev/null
+++ b/configs/Abit/Aa7-Max.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit Aa7-Max motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+
+   compute in3 @*4.153 , @/4.153
+
+   label in4 "FSB VTT Voltage"  
+
+   label in5 "NB Voltage"
+
+   label in6 "NB 2.5V Voltage"
+
+   label in7 "ATX +5V Voltage"
+
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V Voltage"
+
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "5VDual Voltage"   
+
+   compute in9 @*1.788 , @/1.788
+
+   ignore in10
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM1 Temperature"
+
+   label temp4 "PWM2 Temperature"
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX1 FAN Speed"
+
+   label fan5 "AUX2 FAN Speed"
+
+   ignore fan6
diff --git a/configs/Abit/Ag7.conf b/configs/Abit/Ag7.conf
new file mode 100644
index 00000000..1b28e9cb
--- /dev/null
+++ b/configs/Abit/Ag7.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit Ag7 motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+
+   compute in3 @*4.153 , @/4.153
+
+   label in4 "FSB VTT Voltage"  
+
+   label in5 "NB Voltage"
+
+   label in6 "NB 2.5V Voltage"
+
+   label in7 "ATX +5V Voltage"
+
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V Voltage"
+
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "5VDual Voltage"   
+
+   compute in9 @*1.788 , @/1.788
+
+   ignore in10
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM1 Temperature"
+
+   label temp4 "PWM2 Temperature"
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX1 FAN Speed"
+
+   label fan5 "AUX2 FAN Speed"
+
+   ignore fan6
diff --git a/configs/Abit/KN9-Ultra.conf b/configs/Abit/KN9-Ultra.conf
new file mode 100644
index 00000000..159e8a86
--- /dev/null
+++ b/configs/Abit/KN9-Ultra.conf
@@ -0,0 +1,64 @@
+# "My best guesses at my ABIT KN9 Ultra" Contributed by Dawn Light
+# Based on "Winbond W83627EHF configuration originally contributed by Leon Moonen"
+
+chip "w83627ehf-*"
+
+    label in0 "CPU Core"
+    label in1 "DDR2"
+    label in2 "AVCC"
+    label in3 "3VCC"
+    label in4 "DDR2 VTT"
+    label in5 "PCIE"
+    label in6 "ATX +5V"
+    label in7 "VSB"
+    label in8 "VBAT"
+    label in9 "ATX +12V"
+    compute in1 @*(1+(10/10)),  @/(1+(10/10))
+    compute in6 @*(1+(22/10)),  @/(1+(22/10))
+    compute in9 @*(1+(61/10)),  @/(1+(61/10))
+    set in0_min   1.15
+    set in0_max   1.25
+    set in1_min   2.05
+    set in1_max   2.15
+    set in4_min   0.95
+    set in4_max   1.15
+    set in5_min   1.50*0.95
+    set in5_max   1.50*1.05
+    set in6_min   5.0*0.95
+    set in6_max   5.0*1.05
+    set in9_min   12.0*0.95
+    set in9_max   12.0*1.05
+
+# Set the 3.3V
+    set in2_min   3.3*0.95
+    set in2_max   3.3*1.05
+    set in3_min   3.3*0.95
+    set in3_max   3.3*1.05
+    set in7_min   3.3*0.95
+    set in7_max   3.3*1.05
+    set in8_min   3.3*0.90
+    set in8_max   3.3*1.10
+
+# Fans
+    label fan1      "SYS Fan"
+    label fan2      "CPU Fan"
+    label fan3      "AUX1 Fan"
+    label fan4      "AUX2 Fan"
+#   ignore fan3
+    ignore fan4
+    set fan1_min    400
+    set fan2_min    2500
+    set fan3_min    890
+
+# Temperatures
+    label temp1     "Sys Temp"
+    label temp2     "CPU Temp"
+    label temp3     "PWM Temp"
+
+#   ignore temp3
+    set temp1_over  41
+    set temp1_hyst  50
+    set temp2_over  50
+    set temp2_hyst  60
+    set temp3_over  50
+    set temp3_hyst  60
diff --git a/configs/Abit/KV8-MAX3.conf b/configs/Abit/KV8-MAX3.conf
new file mode 100644
index 00000000..5e47c32e
--- /dev/null
+++ b/configs/Abit/KV8-MAX3.conf
@@ -0,0 +1,83 @@
+# This configuration is derived from the AN7 configuration and currently
+# untested, it should work fine though. Please send any success or failure
+# using this config to: Hans de Goede <j.w.r.degoede@…>.
+
+# Notice that this motherboard contains version 1 of the uGuru. This version
+# does not seem to properly support autodetecting the type of the bank1
+# sensors, nor does the autodetection of the number of fan sensors work
+# properly on this chip. 
+
+
+# lm_sensors configuration file for the Abit KV8-MAX3 motherboard
+# 2006-06-24, Hans de Goede <j.w.r.degoede@hhs.nl>
+# Comments welcome!
+# Note it might be nessecaryto load the driver with the following params:
+# bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 fan_sensors=5
+
+chip "abituguru-*"
+
+
+### Voltages
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "ATX +12V"
+   compute in3 @*4.153 , @/4.153
+
+   # I believe this is FSB VTT, in some Abit files its called GMCHVTT, below is the BIOS name
+   label in4 "AUXC Voltage"  
+
+   label in5 "NB Core Voltage"
+
+   label in6 "AGP VDDQ Voltage"
+
+   label in7 "ATX +5V Voltage"
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V Voltage"
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"   
+   compute in9 @*1.788 , @/1.788
+
+   label in10 "3VDUAL Voltage"
+   compute in10 @*1.248 , @/1.248
+
+
+### Temperatures
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "System Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+### Fans
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "OTES FAN Speed"
+
+   label fan4 "FAN4"
+
+   label fan5 "FAN5"
+
+   ignore fan6
diff --git a/configs/Abit/Kv8Pro.conf b/configs/Abit/Kv8Pro.conf
new file mode 100644
index 00000000..169563e9
--- /dev/null
+++ b/configs/Abit/Kv8Pro.conf
@@ -0,0 +1,83 @@
+# lm_sensors configuration file for the Abit Kv8Pro motherboard
+
+# 2006-05-29, Hans de Goede <j.w.r.degoede@hhs.nl>
+
+# Comments welcome!
+
+
+
+chip "abituguru-*"
+
+
+
+### Voltages
+
+
+
+   label in0 "CPU Core Voltage"
+
+   label in1 "DDR Voltage"
+
+   label in2 "DDR VTT Voltage"
+
+   label in3 "NB Voltage"
+
+   label in4 "SB Voltage"
+
+   label in5 "HyperTransport Voltage"
+
+   label in6 "AGP VDDQ Voltage"
+
+   label in7 "ATX +5V"
+
+   compute in7 @*1.788 , @/1.788
+
+   label in8 "ATX +3.3V"
+
+   compute in8 @*1.248 , @/1.248
+
+   label in9 "Standby Voltage (+5V)"
+
+   compute in9 @*1.788 , @/1.788 
+
+   label in10 "3VDual Voltage"   
+
+   compute in10 @*1.248 , @/1.248
+
+
+
+### Temperatures
+
+
+
+   label temp1 "CPU Temperature"
+
+   label temp2 "SYS Temperature"
+
+   label temp3 "PWM Temperature"
+
+   ignore temp4
+
+   ignore temp5
+
+   ignore temp6
+
+   ignore temp7
+
+
+
+### Fans
+
+
+
+   label fan1 "CPU FAN Speed"
+
+   label fan2 "NB FAN Speed"  
+
+   label fan3 "SYS FAN Speed"
+
+   label fan4 "AUX1 FAN Speed"
+
+   label fan5 "AUX2 FAN Speed"
+
+   ignore fan6
diff --git a/configs/Abit/VA-20.conf b/configs/Abit/VA-20.conf
new file mode 100644
index 00000000..3f8a9cbf
--- /dev/null
+++ b/configs/Abit/VA-20.conf
@@ -0,0 +1,41 @@
+#### Abit VA-20 contributed by DawnLight ####
+
+chip "it87-*" "it8712-*"
+
+    label in0 "CPU VCore"
+    label in1 "+2.5V"
+    label in2 "+3.3V"
+    label in3 "+5V"
+    label in4 "+12V"
+    ignore in5
+    ignore in6
+    ignore in7
+    label in8 "VBat"
+
+    ignore  vid
+
+    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
+    compute in4 ((30/10) +1)*@  , @/((30/10) +1)
+    
+    set in0_min 1.55 * 0.95
+    set in0_max 1.55 * 1.05
+    set in1_min 2.4
+    set in1_max 2.6
+    set in2_min 3.3 * 0.95
+    set in2_max 3.3 * 1.05
+    set in3_min 5.0 * 0.95
+    set in3_max 5.0 * 1.05
+    set in4_min 12.5 * 0.95
+    set in4_max 12.5 * 1.05
+
+    label temp1       "M/B Temp"
+    set   temp1_over  44
+    set   temp1_low   15
+    label temp2       "CPU Temp"
+    set   temp2_over  45
+    set   temp2_low   15
+    ignore temp3
+
+    set fan1_min 3000
+    ignore fan2
+    ignore fan3