diff options
-rw-r--r-- | CHANGES | 1 | ||||
-rw-r--r-- | README | 9 | ||||
-rw-r--r-- | configs/Gigabyte/GA-M720-US3.conf | 38 | ||||
-rw-r--r-- | configs/MSI/MS-7302-K9A2GM-V.conf | 22 | ||||
-rw-r--r-- | configs/MSI/MS-7786-A55M-P33.conf | 20 | ||||
-rw-r--r-- | etc/sensors.conf.default | 7 | ||||
-rw-r--r-- | etc/sensors.conf.eg | 3 |
7 files changed, 98 insertions, 2 deletions
@@ -17,6 +17,7 @@ SVN HEAD Add detection of Nuvoton NCT6795D Add detection of DDR4 SPD Add detection of ITE IT8987D + configs: Add sample configuration files. 3.4.0 (2015-06-25) documentation: Update the note about libsensors license @@ -22,7 +22,16 @@ The directories within this package: sensor limits. - sensord: A daemon to watch sensor values and log problems. It includes RRD support. +* configs + This directory contains sample configurations of various boards, + contributed by users of lm-sensors. + Older sample configurations can be found on an old lm-sensors wiki + archived here: + http://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations + + Please contribute back a configuration of your board so other users with + the same hardware won't need to recreate it again and again. INSTALLING LM-SENSORS --------------------- diff --git a/configs/Gigabyte/GA-M720-US3.conf b/configs/Gigabyte/GA-M720-US3.conf new file mode 100644 index 00000000..953a4e27 --- /dev/null +++ b/configs/Gigabyte/GA-M720-US3.conf @@ -0,0 +1,38 @@ +# input routing and scaling based on schematic of a similar MA770T-UD3 board + +chip "it8720-*" + label in0 "Vcore" + + label in1 "VDDR" + + label in2 "+3.3V" + set in2_min 3.3 * 0.95 + set in2_max 3.3 * 1.05 + + # pin has probably ATX power good signal connected, + # but is not configured as such + ignore in3 + + label in4 "+12V" + compute in4 @ * (8.2 + 24.3) / 8.2, @ * 8.2 / (8.2 + 24.3) + set in4_min 12 * 0.95 + set in4_max 12 * 1.05 + + # probably CPU current sense + ignore in5 + + ignore in6 + + compute in7 @ * (6.8 / 10 + 1), @ / (6.8 / 10 + 1) + set in7_min 5 * 0.95 + set in7_max 5 * 1.05 + + ignore cpu0_vid + + label fan1 "CPU FAN" + label fan2 "SYSTEM FAN 1" + label fan3 "SYSTEM FAN 2" + label fan4 "POWER FAN" + + label temp1 "System Temp" + label temp3 "CPU Temp" diff --git a/configs/MSI/MS-7302-K9A2GM-V.conf b/configs/MSI/MS-7302-K9A2GM-V.conf new file mode 100644 index 00000000..fb1d1a0e --- /dev/null +++ b/configs/MSI/MS-7302-K9A2GM-V.conf @@ -0,0 +1,22 @@ +# input routing and scaling read from board schematic + +chip "f71882fg-*" + label in1 "CPU Vcore" + label in2 "+12V" + label in3 "+5V" + ignore in4 + label in5 "+5VSB" + ignore in6 + + compute in2 (@ * 11.00), (@ / 11.00) + compute in3 ((@ * (47 + 10)) / 10), ((@ * 10) / (47 + 10)) + compute in5 ((@ * (47 + 10)) / 10), ((@ * 10) / (47 + 10)) + + label fan1 "CPU Fan" + ignore fan2 + label fan3 "SYS Fan" + ignore fan4 + + label temp1 "CPU Temperature" + ignore temp2 + label temp3 "System Temperature" diff --git a/configs/MSI/MS-7786-A55M-P33.conf b/configs/MSI/MS-7786-A55M-P33.conf new file mode 100644 index 00000000..d22ad512 --- /dev/null +++ b/configs/MSI/MS-7786-A55M-P33.conf @@ -0,0 +1,20 @@ +# input routing and scaling read from board schematic + +chip "f71868a-*" + label in1 "Vcore" + label in2 "VDDR" + label in3 "+5V" + label in4 "+12V" + label in5 "Vcc1P1" + ignore in6 + + compute in3 @ * (200 + 47) / 47, @ * 47 / (200 + 47) + compute in4 @ * 11, @ / 11 + + label fan1 "CPU FAN" + label fan2 "SYS FAN1" + ignore fan3 + + label temp1 "System DDR Temp" + label temp2 "System Temp" + label temp3 "System SIO Temp" diff --git a/etc/sensors.conf.default b/etc/sensors.conf.default index f964b7d4..41e78880 100644 --- a/etc/sensors.conf.default +++ b/etc/sensors.conf.default @@ -9,8 +9,11 @@ # placed in custom configuration files located in /etc/sensors.d. This # approach makes further updates much easier. # -# Such custom configuration files for specific mainboards can be found at -# http://www.lm-sensors.org/wiki/Configurations +# Such custom configuration files for specific mainboards can be found in +# "configs" directory of lm-sensors package. +# +# Please contribute back a configuration of your board so other users with +# the same hardware won't need to recreate it again and again. chip "lm78-*" "lm79-*" "lm80-*" "lm96080-*" diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index 309aad6d..1bd39356 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -6,6 +6,9 @@ # and writing improper limits may have all sorts of weird effects, # from beeping to CPU throttling to instant reboot. If you want to # actually set the limits, remove the comment marks, then run "sensors -s". +# +# This is a legacy example file. In general, configurations for new boards +# should be placed in custom configuration files located in /etc/sensors.d. chip "lm78-*" "lm79-*" "w83781d-*" |