diff options
Diffstat (limited to 'etc')
-rw-r--r-- | etc/sensors.conf.eg | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index d8fc9fc8..309aad6d 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -745,10 +745,10 @@ chip "lm80-*" # All 4 of these limits apply to the single temperature sensor. # "crit" may or may not do anything on your motherboard but it should # be set higher than the "max" thresholds. -# set temp1_max_hyst 45 # set temp1_max 52 -# set temp1_crit_hyst 57 +# set temp1_max_hyst 45 # set temp1_crit 62 +# set temp1_crit_hyst 57 chip "via686a-*" @@ -822,12 +822,12 @@ chip "via686a-*" # we would still get some oscillation when the temp hovers around the limit # due to noise.) -# set temp1_max_hyst 40 # set temp1_max 45 -# set temp2_max_hyst 55 +# set temp1_max_hyst 40 # set temp2_max 60 -# set temp3_max_hyst 60 +# set temp2_max_hyst 55 # set temp3_max 65 +# set temp3_max_hyst 60 # You could set your fan limits too, but the defaults should be fine. @@ -1452,14 +1452,14 @@ chip "vt1211-*" compute temp7 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) -# set temp1_max_hyst 80 # set temp1_max 85 -# set temp2_max_hyst 60 +# set temp1_max_hyst 80 # set temp2_max 65 -# set temp3_max_hyst 60 +# set temp2_max_hyst 60 # set temp3_max 65 -# set temp4_max_hyst 40 +# set temp3_max_hyst 60 # set temp4_max 45 +# set temp4_max_hyst 40 # set fan1_min 3000 # set fan2_min 3000 @@ -1520,10 +1520,10 @@ chip "vt8231-*" compute temp3 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) -# set temp1_max_hyst 60 # set temp1_max 65 -# set temp2_max_hyst 40 +# set temp1_max_hyst 60 # set temp2_max 45 +# set temp2_max_hyst 40 # set fan1_min 3000 # set fan2_min 3000 |