diff options
Diffstat (limited to 'build-aux/gl/build-aux/funclib.sh')
| -rw-r--r-- | build-aux/gl/build-aux/funclib.sh | 247 |
1 files changed, 193 insertions, 54 deletions
diff --git a/build-aux/gl/build-aux/funclib.sh b/build-aux/gl/build-aux/funclib.sh index fbaa8d0f..9cb02ff6 100644 --- a/build-aux/gl/build-aux/funclib.sh +++ b/build-aux/gl/build-aux/funclib.sh @@ -1,10 +1,10 @@ # Set a version string for this script. -scriptversion=2013-08-23.20; # UTC +scriptversion=2014-01-03.01; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 -# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# Copyright (C) 2004-2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -84,47 +84,157 @@ nl=' ' IFS="$sp $nl" -# There are still modern systems that have problems with 'echo' mis- -# handling backslashes, among others, so make sure $bs_echo is set to a -# command that correctly interprets backslashes. -# (this code from Autoconf 2.68) - -# Printing a long string crashes Solaris 7 /usr/bin/printf. -bs_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -bs_echo=$bs_echo$bs_echo$bs_echo$bs_echo$bs_echo -bs_echo=$bs_echo$bs_echo$bs_echo$bs_echo$bs_echo$bs_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $bs_echo`" = "X$bs_echo") 2>/dev/null; then - bs_echo='print -r --' - bs_echo_n='print -rn --' -elif (test "X`printf %s $bs_echo`" = "X$bs_echo") 2>/dev/null; then - bs_echo='printf %s\n' - bs_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $bs_echo) 2>/dev/null`" = "X-n $bs_echo"; then - bs_echo_body='eval /usr/ucb/echo -n "$1$nl"' - bs_echo_n='/usr/ucb/echo -n' - else - bs_echo_body='eval expr "X$1" : "X\\(.*\\)"' - bs_echo_n_body='eval - arg=$1; - case $arg in #( - *"$nl"*) - expr "X$arg" : "X\\(.*\\)$nl"; - arg=`expr "X$arg" : ".*$nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$nl" - ' - export bs_echo_n_body - bs_echo_n='sh -c $bs_echo_n_body bs_echo' - fi - export bs_echo_body - bs_echo='sh -c $bs_echo_body bs_echo' +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi + +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## @@ -135,16 +245,14 @@ fi # in the command search PATH. : ${CP="cp -f"} -: ${ECHO="$bs_echo"} -: ${EGREP="grep -E"} -: ${FGREP="grep -F"} -: ${GREP="grep"} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} -: ${SED="sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} @@ -235,13 +343,13 @@ exit_status=$EXIT_SUCCESS progpath=$0 # The name of this program. -progname=`$bs_echo "$progpath" |$SED "$sed_basename"` +progname=`$ECHO "$progpath" |$SED "$sed_basename"` # Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) - progdir=`$bs_echo "$progpath" |$SED "$sed_dirname"` + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` progpath=$progdir/$progname ;; @@ -435,7 +543,7 @@ func_append_uniq () { $debug_cmd - eval _G_current_value='`$bs_echo $'$1'`' + eval _G_current_value='`$ECHO $'$1'`' _G_delim=`expr "$2" : '\(.\)'` case $_G_delim$_G_current_value$_G_delim in @@ -548,7 +656,7 @@ func_echo () IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS - $bs_echo "$progname: $_G_line" + $ECHO "$progname: $_G_line" done IFS=$func_echo_IFS } @@ -582,17 +690,17 @@ func_echo_infix_1 () for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" do test -n "$_G_tc" && { - _G_esc_tc=`$bs_echo "$_G_tc" | sed "$sed_make_literal_regex"` - _G_indent=`$bs_echo "$_G_indent" | sed "s|$_G_esc_tc||g"` + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` } done - _G_indent="$progname: "`echo "$_G_indent" | sed 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes func_echo_infix_1_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_infix_1_IFS - $bs_echo "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 _G_prefix=$_G_indent done IFS=$func_echo_infix_1_IFS @@ -1156,10 +1264,41 @@ func_warning () } +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + # Local variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: |