Imported from /home/lorry/working-area/delta_make-tarball/make-4.1.tar.bz2.HEADmake-4.1master

348 files changed, 193718 insertions, 0 deletions

diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..b1de1b6
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international!  The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages.  A few packages already provide translations for their
+messages.
+
+   If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site.  But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language.  Most such
+packages use GNU `gettext'.  Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  Installers may use special
+options at configuration time for changing the default behaviour.  The
+command:
+
+     ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+   When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it.  If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+   Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination.  If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect.  Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc.  On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'.  You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003).  During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+   If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended.  For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around.  If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of June
+2010.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+     Ready PO files       af am an ar as ast az be be@latin bg bn_IN bs ca
+                        +--------------------------------------------------+
+     a2ps               |                       []                      [] |
+     aegis              |                                                  |
+     ant-phone          |                                                  |
+     anubis             |                                                  |
+     aspell             |                []                             [] |
+     bash               |                                                  |
+     bfd                |                                                  |
+     bibshelf           |                []                                |
+     binutils           |                                                  |
+     bison              |                                                  |
+     bison-runtime      |                []                                |
+     bluez-pin          | []             []                                |
+     bombono-dvd        |                                                  |
+     buzztard           |                                                  |
+     cflow              |                                                  |
+     clisp              |                                                  |
+     coreutils          |                                   []          [] |
+     cpio               |                                                  |
+     cppi               |                                                  |
+     cpplib             |                                               [] |
+     cryptsetup         |                                                  |
+     dfarc              |                                                  |
+     dialog             |                             []                [] |
+     dico               |                                                  |
+     diffutils          |                                               [] |
+     dink               |                                                  |
+     doodle             |                                                  |
+     e2fsprogs          |                                               [] |
+     enscript           |                                               [] |
+     exif               |                                                  |
+     fetchmail          |                                               [] |
+     findutils          |                                   []             |
+     flex               |                                               [] |
+     freedink           |                                                  |
+     gas                |                                                  |
+     gawk               |                []                             [] |
+     gcal               |                                               [] |
+     gcc                |                                                  |
+     gettext-examples   | []             []                 []          [] |
+     gettext-runtime    |                                   []          [] |
+     gettext-tools      |                                   []          [] |
+     gip                |                                   []             |
+     gjay               |                                                  |
+     gliv               |                                   []             |
+     glunarclock        |                []                 []             |
+     gnubiff            |                                                  |
+     gnucash            |                                               [] |
+     gnuedu             |                                                  |
+     gnulib             |                                                  |
+     gnunet             |                                                  |
+     gnunet-gtk         |                                                  |
+     gnutls             |                                                  |
+     gold               |                                                  |
+     gpe-aerial         |                                                  |
+     gpe-beam           |                                                  |
+     gpe-bluetooth      |                                                  |
+     gpe-calendar       |                                                  |
+     gpe-clock          |                []                                |
+     gpe-conf           |                                                  |
+     gpe-contacts       |                                                  |
+     gpe-edit           |                                                  |
+     gpe-filemanager    |                                                  |
+     gpe-go             |                                                  |
+     gpe-login          |                                                  |
+     gpe-ownerinfo      |                []                                |
+     gpe-package        |                                                  |
+     gpe-sketchbook     |                                                  |
+     gpe-su             |                []                                |
+     gpe-taskmanager    |                []                                |
+     gpe-timesheet      |                []                                |
+     gpe-today          |                []                                |
+     gpe-todo           |                                                  |
+     gphoto2            |                                                  |
+     gprof              |                                   []             |
+     gpsdrive           |                                                  |
+     gramadoir          |                                                  |
+     grep               |                                                  |
+     grub               |                []                             [] |
+     gsasl              |                                                  |
+     gss                |                                                  |
+     gst-plugins-bad    |                                   []             |
+     gst-plugins-base   |                                   []             |
+     gst-plugins-good   |                                   []             |
+     gst-plugins-ugly   |                                   []             |
+     gstreamer          | []                                []          [] |
+     gtick              |                                                  |
+     gtkam              |                       []                         |
+     gtkorphan          |                                   []             |
+     gtkspell           | []             []     []                         |
+     gutenprint         |                                                  |
+     hello              |                                   []             |
+     help2man           |                                                  |
+     hylafax            |                                                  |
+     idutils            |                                                  |
+     indent             |                                   []          [] |
+     iso_15924          |                                                  |
+     iso_3166           | []          []        []          []  []   [] [] |
+     iso_3166_2         |                                                  |
+     iso_4217           |                                                  |
+     iso_639            |             [] []     []              []         |
+     iso_639_3          |                                                  |
+     jwhois             |                                                  |
+     kbd                |                                                  |
+     keytouch           |                                               [] |
+     keytouch-editor    |                                                  |
+     keytouch-keyboa... |                                               [] |
+     klavaro            |          []                                      |
+     latrine            |                                                  |
+     ld                 |                                   []             |
+     leafpad            |                                   []          [] |
+     libc               |                                   []          [] |
+     libexif            |                       ()                         |
+     libextractor       |                                                  |
+     libgnutls          |                                                  |
+     libgpewidget       |                                                  |
+     libgpg-error       |                                                  |
+     libgphoto2         |                                                  |
+     libgphoto2_port    |                                                  |
+     libgsasl           |                                                  |
+     libiconv           |                                   []             |
+     libidn             |                                                  |
+     lifelines          |                                                  |
+     liferea            |                             []                [] |
+     lilypond           |                                                  |
+     linkdr             |          []                                      |
+     lordsawar          |                                                  |
+     lprng              |                                                  |
+     lynx               |                                               [] |
+     m4                 |                                                  |
+     mailfromd          |                                                  |
+     mailutils          |                                                  |
+     make               |                                                  |
+     man-db             |                                                  |
+     man-db-manpages    |                                                  |
+     minicom            |                                                  |
+     mkisofs            |                                                  |
+     myserver           |                                                  |
+     nano               |                                   []          [] |
+     opcodes            |                                                  |
+     parted             |                                                  |
+     pies               |                                                  |
+     popt               |                                                  |
+     psmisc             |                                                  |
+     pspp               |                                               [] |
+     pwdutils           |                                                  |
+     radius             |                                               [] |
+     recode             |                       []                      [] |
+     rosegarden         |                                                  |
+     rpm                |                                                  |
+     rush               |                                                  |
+     sarg               |                                                  |
+     screem             |                                                  |
+     scrollkeeper       |                    [] []                      [] |
+     sed                |                []                             [] |
+     sharutils          |                                   []          [] |
+     shishi             |                                                  |
+     skencil            |                                                  |
+     solfege            |                                                  |
+     solfege-manual     |                                                  |
+     soundtracker       |                                                  |
+     sp                 |                                                  |
+     sysstat            |                                                  |
+     tar                |                                   []             |
+     texinfo            |                                                  |
+     tin                |                                                  |
+     unicode-han-tra... |                                                  |
+     unicode-transla... |                                                  |
+     util-linux-ng      |                                               [] |
+     vice               |                                                  |
+     vmm                |                                                  |
+     vorbis-tools       |                                                  |
+     wastesedge         |                                                  |
+     wdiff              |                                                  |
+     wget               |                       []                      [] |
+     wyslij-po          |                                                  |
+     xchat              |                []     []          []          [] |
+     xdg-user-dirs      | []    []    [] []     []    []    []  []      [] |
+     xkeyboard-config   |                                   []          [] |
+                        +--------------------------------------------------+
+                          af am an ar as ast az be be@latin bg bn_IN bs ca
+                           6  0  1  2  3 19   1 10     3    28   3    1 38
+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                        +-------------------------------------------------+
+     a2ps               |     [] []  []  []     []            [] []       |
+     aegis              |        []  []                       []          |
+     ant-phone          |        []  ()                                   |
+     anubis             |        []  []                                   |
+     aspell             |     [] []  []         []            []          |
+     bash               |     []                           [] []          |
+     bfd                |                                     []          |
+     bibshelf           |        []  []                       []          |
+     binutils           |                                     []          |
+     bison              |            []  []                               |
+     bison-runtime      |        []  []  []                      []       |
+     bluez-pin          |     [] []  []  []                [] []          |
+     bombono-dvd        |        []                                       |
+     buzztard           |     [] []  []                                   |
+     cflow              |        []  []                                   |
+     clisp              |        []  []     []                []          |
+     coreutils          |     [] []  []                          []       |
+     cpio               |                                                 |
+     cppi               |                                                 |
+     cpplib             |        []  []                       []          |
+     cryptsetup         |            []                                   |
+     dfarc              |        []  []                       []          |
+     dialog             |        []  []                    [] []    []    |
+     dico               |                                                 |
+     diffutils          |     [] []  []  []                [] []          |
+     dink               |        []  []                       []          |
+     doodle             |            []                                   |
+     e2fsprogs          |     []     []                       []          |
+     enscript           |        []  []         []                        |
+     exif               |     () []  []                                   |
+     fetchmail          |     [] []  ()  []     []            []          |
+     findutils          |     [] []  []                                   |
+     flex               |            []                       []          |
+     freedink           |        []  []                       []          |
+     gas                |                                     []          |
+     gawk               |        []  []                       []          |
+     gcal               |                                     []          |
+     gcc                |            []                       []          |
+     gettext-examples   |            []  []                [] []          |
+     gettext-runtime    |        []  []                    [] []          |
+     gettext-tools      |            []                       []    []    |
+     gip                |        []  []                       []    []    |
+     gjay               |            []                                   |
+     gliv               |     [] []  []                                   |
+     glunarclock        |        []  []                                   |
+     gnubiff            |            ()                                   |
+     gnucash            |     []     ()  ()     ()            ()          |
+     gnuedu             |        []                           []          |
+     gnulib             |            []                       []          |
+     gnunet             |                                                 |
+     gnunet-gtk         |        []                                       |
+     gnutls             |     []     []                                   |
+     gold               |                                     []          |
+     gpe-aerial         |     [] []  []                       []          |
+     gpe-beam           |     [] []  []                       []          |
+     gpe-bluetooth      |        []  []                                   |
+     gpe-calendar       |        []                                       |
+     gpe-clock          |     [] []  []                       []          |
+     gpe-conf           |     [] []  []                                   |
+     gpe-contacts       |        []  []                       []          |
+     gpe-edit           |        []  []                                   |
+     gpe-filemanager    |        []  []                       []          |
+     gpe-go             |     [] []  []                       []          |
+     gpe-login          |        []  []                                   |
+     gpe-ownerinfo      |     [] []  []                       []          |
+     gpe-package        |        []  []                       []          |
+     gpe-sketchbook     |     [] []  []                       []          |
+     gpe-su             |     [] []  []                       []          |
+     gpe-taskmanager    |     [] []  []                       []          |
+     gpe-timesheet      |     [] []  []                       []          |
+     gpe-today          |     [] []  []                       []          |
+     gpe-todo           |        []  []                       []          |
+     gphoto2            |     [] []  ()         []            []    []    |
+     gprof              |        []  []                       []          |
+     gpsdrive           |        []                           [] []       |
+     gramadoir          |        []  []                    []             |
+     grep               |     []                                          |
+     grub               |        []  []                                   |
+     gsasl              |            []                                   |
+     gss                |                                                 |
+     gst-plugins-bad    |     [] []  []                       []    []    |
+     gst-plugins-base   |     [] []  []                       []    []    |
+     gst-plugins-good   |     [] []  []  []                   []    []    |
+     gst-plugins-ugly   |     [] []  []  []                   []    []    |
+     gstreamer          |     [] []  []                       []    []    |
+     gtick              |        []  ()                    []             |
+     gtkam              |     [] []  ()                    [] []          |
+     gtkorphan          |     [] []  []                    []             |
+     gtkspell           |     [] []  []  []                [] []    []    |
+     gutenprint         |        []  []         []                        |
+     hello              |        []  []                    [] []          |
+     help2man           |            []                                   |
+     hylafax            |            []                       []          |
+     idutils            |        []  []                                   |
+     indent             |     [] []  []                    [] [] [] []    |
+     iso_15924          |        []      ()                [] []          |
+     iso_3166           | []  [] []  []  ()                [] [] [] ()    |
+     iso_3166_2         |                ()                               |
+     iso_4217           |     [] []  []  ()                   [] []       |
+     iso_639            | []  [] []  []  ()                [] []          |
+     iso_639_3          | []                                              |
+     jwhois             |                                     []          |
+     kbd                |     [] []  []  []                   []          |
+     keytouch           |        []  []                                   |
+     keytouch-editor    |        []  []                                   |
+     keytouch-keyboa... |        []                                       |
+     klavaro            |     [] []  []                    []             |
+     latrine            |        []  ()                                   |
+     ld                 |        []                           []          |
+     leafpad            |     [] []  []  []                   []    []    |
+     libc               |     [] []  []                       []          |
+     libexif            |        []  []         ()                        |
+     libextractor       |                                                 |
+     libgnutls          |     []                                          |
+     libgpewidget       |        []  []                                   |
+     libgpg-error       |     []     []                                   |
+     libgphoto2         |        []  ()                                   |
+     libgphoto2_port    |        []  ()                             []    |
+     libgsasl           |                                                 |
+     libiconv           |     [] []  []                    []    []       |
+     libidn             |     []     []                    []             |
+     lifelines          |        []  ()                                   |
+     liferea            |     []     []  []                   []    []    |
+     lilypond           |     []     []                       []          |
+     linkdr             |        []  []                       []          |
+     lordsawar          |        []                                       |
+     lprng              |                                                 |
+     lynx               |     [] []  []                          []       |
+     m4                 |     [] []  []  []                               |
+     mailfromd          |                                                 |
+     mailutils          |                                     []          |
+     make               |        []  []                       []          |
+     man-db             |                                                 |
+     man-db-manpages    |                                                 |
+     minicom            |     [] []  []                       []          |
+     mkisofs            |                                                 |
+     myserver           |                                                 |
+     nano               |            []                       []    []    |
+     opcodes            |            []                       []          |
+     parted             |     []     []                                   |
+     pies               |                                                 |
+     popt               |     [] []  []                    [] []          |
+     psmisc             |     []     []                             []    |
+     pspp               |                                     []          |
+     pwdutils           |        []                                       |
+     radius             |                                     []          |
+     recode             |     [] []  []  []                [] []          |
+     rosegarden         |     ()     ()                       ()          |
+     rpm                |        []  []                       []          |
+     rush               |                                                 |
+     sarg               |                                                 |
+     screem             |                                                 |
+     scrollkeeper       |     [] []  []         []            []          |
+     sed                |     []     []  []                [] [] []       |
+     sharutils          |        []  []                       [] []       |
+     shishi             |                                                 |
+     skencil            |        []  ()                       []          |
+     solfege            |            []                    []    []       |
+     solfege-manual     |                                  []    []       |
+     soundtracker       |        []  []                       []          |
+     sp                 |            []                                   |
+     sysstat            |        []  []                             []    |
+     tar                |     []     []                          [] []    |
+     texinfo            |            []                    [] []          |
+     tin                |            []                          []       |
+     unicode-han-tra... |                                                 |
+     unicode-transla... |                                                 |
+     util-linux-ng      |     [] []  []                       []          |
+     vice               |        ()  ()                                   |
+     vmm                |            []                                   |
+     vorbis-tools       |     []                           []             |
+     wastesedge         |        []                                       |
+     wdiff              |            []                       []          |
+     wget               |     []     []                          []       |
+     wyslij-po          |                                                 |
+     xchat              |     []     []  []                   [] []       |
+     xdg-user-dirs      | []  [] []  []  []                [] [] [] []    |
+     xkeyboard-config   | []  [] []  []                    [] []          |
+                        +-------------------------------------------------+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                           5  64 105 117 18  1   8     0   28 89 18 19  0
+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                        +----------------------------------------------------+
+     a2ps               | []  []                          []        []       |
+     aegis              |     []                                 []          |
+     ant-phone          |     []                                 []          |
+     anubis             | []  []                          []     []          |
+     aspell             |     []  []                      []     []          |
+     bash               | []  []                          []        []       |
+     bfd                | []  []                          []                 |
+     bibshelf           | []  []  []                      []     []          |
+     binutils           | []  []                          []                 |
+     bison              | []  []  []                      []                 |
+     bison-runtime      | []  []  []                      []     [] []       |
+     bluez-pin          | []  []  []                [] [] []  []    []       |
+     bombono-dvd        | []                                                 |
+     buzztard           |                                 []                 |
+     cflow              | []      []                      []                 |
+     clisp              |     []                                             |
+     coreutils          |     []  []                []    []     []          |
+     cpio               | []  []  []                      []                 |
+     cppi               | []  []                                             |
+     cpplib             | []  []                          []                 |
+     cryptsetup         |     []                          []     []          |
+     dfarc              | []  []                                 []          |
+     dialog             |     []  [] []                   []  [] [] []       |
+     dico               |                                                    |
+     diffutils          | []  []  [] []    []       []    []     [] []       |
+     dink               |     []                                             |
+     doodle             |         []                             []          |
+     e2fsprogs          |     []                          []                 |
+     enscript           |     []  []             []       []                 |
+     exif               | []  []                          []  [] [] []       |
+     fetchmail          |     []                          []     [] []       |
+     findutils          | []  []  []                []    []     []          |
+     flex               | []  []  []                                         |
+     freedink           | []  []                          []                 |
+     gas                |     []                          []                 |
+     gawk               |     []  []       []             []     () []       |
+     gcal               |     []                                             |
+     gcc                |                                 []                 |
+     gettext-examples   | []  []  []                []    []     [] []       |
+     gettext-runtime    | []  []  []                      []     [] []       |
+     gettext-tools      |     []                          []     [] []       |
+     gip                | []  []  [] []                   []        []       |
+     gjay               | []                                                 |
+     gliv               | []  ()                                             |
+     glunarclock        | []      []                []    []                 |
+     gnubiff            |     ()                          []     ()          |
+     gnucash            | ()  ()           ()       ()           () []       |
+     gnuedu             |     []                                 []          |
+     gnulib             | []  []  []                []           [] []       |
+     gnunet             |                                                    |
+     gnunet-gtk         |     []                                             |
+     gnutls             |     []                                 []          |
+     gold               | []                              []                 |
+     gpe-aerial         | []  []                          []                 |
+     gpe-beam           | []  []                          []        []       |
+     gpe-bluetooth      | []                              []     [] []       |
+     gpe-calendar       | []                                        []       |
+     gpe-clock          | []  []                    []    []        []       |
+     gpe-conf           | []  []                          []        []       |
+     gpe-contacts       | []  []                          []        []       |
+     gpe-edit           | []                              []        []       |
+     gpe-filemanager    | []                        []    []        []       |
+     gpe-go             | []  []                    []    []        []       |
+     gpe-login          | []                              []        []       |
+     gpe-ownerinfo      | []  []                    []    []        []       |
+     gpe-package        | []                              []        []       |
+     gpe-sketchbook     | []  []                          []        []       |
+     gpe-su             | []  []     []             []    []        []       |
+     gpe-taskmanager    | []  []                    []    []        []       |
+     gpe-timesheet      | []  []  []                      []        []       |
+     gpe-today          | []  []  [] []             []    []        []       |
+     gpe-todo           | []                              []        []       |
+     gphoto2            | []  []                    []    []     [] []       |
+     gprof              | []  []  []                      []                 |
+     gpsdrive           |            []                   []     []          |
+     gramadoir          |     []  []                      []                 |
+     grep               | []                                     []          |
+     grub               | []                        []    []     []          |
+     gsasl              | []  []  []                      []     []          |
+     gss                | []  []  []                      []     []          |
+     gst-plugins-bad    | []  []                    []    []     [] []       |
+     gst-plugins-base   | []  []                    []    []     [] []       |
+     gst-plugins-good   | []  []                    []    []     [] []       |
+     gst-plugins-ugly   | []  []                    []    []     [] []       |
+     gstreamer          | []  []                    []    []     []          |
+     gtick              | []  []  []                      []     []          |
+     gtkam              |     []                    []    []     [] []       |
+     gtkorphan          |     []                          []     []          |
+     gtkspell           | []  []  [] []             [] [] []     [] []       |
+     gutenprint         | []  []                    []           []          |
+     hello              | []      []                      []                 |
+     help2man           | []  []                                             |
+     hylafax            |                                 []                 |
+     idutils            | []  []  []                []    []     []          |
+     indent             | []  []  [] []             []    []     [] []       |
+     iso_15924          | []  ()                          []     []          |
+     iso_3166           | []  ()  [] [] [] [] [] [] []    []     [] []       |
+     iso_3166_2         |     ()                    []    []     []          |
+     iso_4217           | []  ()                    []    []     [] []       |
+     iso_639            | []  ()  []    []          []    []     [] []    [] |
+     iso_639_3          |     ()                                 []       [] |
+     jwhois             | []  []                    []    []     []          |
+     kbd                |     []                          []                 |
+     keytouch           | []  []  []                []    []     []          |
+     keytouch-editor    | []      []                []    []     []          |
+     keytouch-keyboa... | []      []                []    []     []          |
+     klavaro            |            []             []                       |
+     latrine            | []                              []     []          |
+     ld                 | []  []  []                      []                 |
+     leafpad            | []  []  []       []       []    []     [] ()       |
+     libc               | []  []     []                   []        []       |
+     libexif            |                                        []          |
+     libextractor       |                                                    |
+     libgnutls          |     []                                 []          |
+     libgpewidget       | []      []                      []        []       |
+     libgpg-error       |     []                                 []          |
+     libgphoto2         |     []                                 [] []       |
+     libgphoto2_port    |     []                                 [] []       |
+     libgsasl           | []  []  []                      []     []          |
+     libiconv           | []  []  []                      []     [] []       |
+     libidn             | []  []                          []     []          |
+     lifelines          |     ()                                             |
+     liferea            |     []                    []           [] []       |
+     lilypond           | []  []                                             |
+     linkdr             | []               []    [] []           []          |
+     lordsawar          |                                                    |
+     lprng              |                                 []                 |
+     lynx               |     []                    []    []     [] []       |
+     m4                 | []  []  [] []                   []        []       |
+     mailfromd          |                                                    |
+     mailutils          |     []                          []                 |
+     make               | []  []  [] []    []    []       []     [] []       |
+     man-db             |                                 []     []          |
+     man-db-manpages    |                                 []                 |
+     minicom            | []  []                    []    []        []       |
+     mkisofs            | []  []                          []     []          |
+     myserver           |                                                    |
+     nano               | []  []  [] []             []           []          |
+     opcodes            | []  []  []                      []                 |
+     parted             |     []                          []     [] []       |
+     pies               |                                                    |
+     popt               | []  []  [] []             []    []  [] [] []       |
+     psmisc             | []  []                          []                 |
+     pspp               |                                                    |
+     pwdutils           |     []                          []                 |
+     radius             |     []                          []                 |
+     recode             | []  []  [] []    []       []    []     []          |
+     rosegarden         | ()  ()                          ()     () ()       |
+     rpm                |                                 []        []       |
+     rush               |                                                    |
+     sarg               |     []                                             |
+     screem             |                                        [] []       |
+     scrollkeeper       | []                        []    []     []          |
+     sed                | []  []  [] []             []    []     [] []       |
+     sharutils          | []  []  []                []    []     [] []       |
+     shishi             |     []                                             |
+     skencil            |     []                                             |
+     solfege            | []  []     []                          []          |
+     solfege-manual     |     []     []                                      |
+     soundtracker       |     []                                 []          |
+     sp                 |     []                                    ()       |
+     sysstat            | []  []                          []     [] []       |
+     tar                | []  []  []                []    []     [] []       |
+     texinfo            |     []                          []     [] []       |
+     tin                |     []                                             |
+     unicode-han-tra... |                                                    |
+     unicode-transla... |     []  []                                         |
+     util-linux-ng      | []  []                    []    []     [] []       |
+     vice               |     ()                    ()           ()          |
+     vmm                |     []                                             |
+     vorbis-tools       |                                 []                 |
+     wastesedge         |     ()                                 ()          |
+     wdiff              | []                                                 |
+     wget               | []  []  []             [] []    []     [] []       |
+     wyslij-po          | []  []                          []                 |
+     xchat              | []  []        []    []    []    []     [] []    [] |
+     xdg-user-dirs      | []  []  [] [] [] [] []    []    []  [] [] []    [] |
+     xkeyboard-config   | []  []                    []    []     []          |
+                        +----------------------------------------------------+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                          105 121 53 20  4  8  3  5 53  2 120  5 84 67  0  4
+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                        +-----------------------------------------------+
+     a2ps               |                               []              |
+     aegis              |                                               |
+     ant-phone          |                                               |
+     anubis             |                               []    []        |
+     aspell             |                         []                    |
+     bash               |                                               |
+     bfd                |                                               |
+     bibshelf           |                []             []              |
+     binutils           |                                               |
+     bison              |                               []              |
+     bison-runtime      |       []    [] []             []    []        |
+     bluez-pin          |    [] []    [] []             []              |
+     bombono-dvd        |                                               |
+     buzztard           |                                               |
+     cflow              |                                               |
+     clisp              |                                               |
+     coreutils          |          []                                   |
+     cpio               |                                               |
+     cppi               |                                               |
+     cpplib             |                                               |
+     cryptsetup         |                                               |
+     dfarc              |                   []                          |
+     dialog             |    []       [] []             []    []        |
+     dico               |                                               |
+     diffutils          |                []             []              |
+     dink               |                                               |
+     doodle             |                                               |
+     e2fsprogs          |                                               |
+     enscript           |                                               |
+     exif               |                []                             |
+     fetchmail          |                                               |
+     findutils          |                                               |
+     flex               |                                               |
+     freedink           |                                     []        |
+     gas                |                                               |
+     gawk               |                                               |
+     gcal               |                                               |
+     gcc                |                                               |
+     gettext-examples   |       []       []             [] []           |
+     gettext-runtime    | []                                            |
+     gettext-tools      | []                                            |
+     gip                |                []             []              |
+     gjay               |                                               |
+     gliv               |                                               |
+     glunarclock        |                []                             |
+     gnubiff            |                                               |
+     gnucash            | ()          ()                      ()     () |
+     gnuedu             |                                               |
+     gnulib             |                                               |
+     gnunet             |                                               |
+     gnunet-gtk         |                                               |
+     gnutls             |                               []              |
+     gold               |                                               |
+     gpe-aerial         |                []                             |
+     gpe-beam           |                []                             |
+     gpe-bluetooth      |                []                []           |
+     gpe-calendar       |                []                             |
+     gpe-clock          | []    []       []             [] []           |
+     gpe-conf           | []             []                             |
+     gpe-contacts       | []             []                             |
+     gpe-edit           |                []                             |
+     gpe-filemanager    | []             []                             |
+     gpe-go             | []             []                []           |
+     gpe-login          |                []                             |
+     gpe-ownerinfo      |                []             []              |
+     gpe-package        | []             []                             |
+     gpe-sketchbook     | []             []                             |
+     gpe-su             | []    []       []             [] [] []        |
+     gpe-taskmanager    | [] [] []       []             [] []           |
+     gpe-timesheet      |                []             []              |
+     gpe-today          |       []       []             [] []           |
+     gpe-todo           |                []                   []        |
+     gphoto2            |                                               |
+     gprof              |                               []              |
+     gpsdrive           |                                               |
+     gramadoir          |                                               |
+     grep               |                                               |
+     grub               |                                               |
+     gsasl              |                                               |
+     gss                |                                               |
+     gst-plugins-bad    |             [] []                [] []        |
+     gst-plugins-base   |             [] []                             |
+     gst-plugins-good   |                []                []           |
+     gst-plugins-ugly   |             [] []             [] [] []        |
+     gstreamer          |                                               |
+     gtick              |                                               |
+     gtkam              |                                     []        |
+     gtkorphan          |                []                      []     |
+     gtkspell           |       []    [] []       []    []    [] []     |
+     gutenprint         |                                               |
+     hello              | []             []             []              |
+     help2man           |                                               |
+     hylafax            |                                               |
+     idutils            |                                               |
+     indent             |                                               |
+     iso_15924          |             [] []                             |
+     iso_3166           | [] []       () [] [] []    []       []        |
+     iso_3166_2         |                                               |
+     iso_4217           |             []                      []        |
+     iso_639            |                      []    []                 |
+     iso_639_3          |                            []                 |
+     jwhois             |                []                             |
+     kbd                |                                               |
+     keytouch           |                []                             |
+     keytouch-editor    |                []                             |
+     keytouch-keyboa... |                []                             |
+     klavaro            |                                     []        |
+     latrine            |                []                             |
+     ld                 |                                               |
+     leafpad            | []          [] []                             |
+     libc               | []                                            |
+     libexif            |                                               |
+     libextractor       |                                               |
+     libgnutls          |                               []              |
+     libgpewidget       |                []             []              |
+     libgpg-error       |                                               |
+     libgphoto2         |                                               |
+     libgphoto2_port    |                                               |
+     libgsasl           |                                               |
+     libiconv           |                                               |
+     libidn             |                                               |
+     lifelines          |                                               |
+     liferea            |                                               |
+     lilypond           |                                               |
+     linkdr             |                                               |
+     lordsawar          |                                               |
+     lprng              |                                               |
+     lynx               |                                               |
+     m4                 |                                               |
+     mailfromd          |                                               |
+     mailutils          |                                               |
+     make               | []                                            |
+     man-db             |                                               |
+     man-db-manpages    |                                               |
+     minicom            |                                     []        |
+     mkisofs            |                                               |
+     myserver           |                                               |
+     nano               |                               []    []        |
+     opcodes            |                                               |
+     parted             |                                               |
+     pies               |                                               |
+     popt               | []             []                   []        |
+     psmisc             |                                               |
+     pspp               |                                               |
+     pwdutils           |                                               |
+     radius             |                                               |
+     recode             |                                               |
+     rosegarden         |                                               |
+     rpm                |                                               |
+     rush               |                                               |
+     sarg               |                                               |
+     screem             |                                               |
+     scrollkeeper       |                                     []     [] |
+     sed                |                                               |
+     sharutils          |                                               |
+     shishi             |                                               |
+     skencil            |                                               |
+     solfege            |                                     []        |
+     solfege-manual     |                                               |
+     soundtracker       |                                               |
+     sp                 |                                               |
+     sysstat            |                []                             |
+     tar                |       []                                      |
+     texinfo            |                                     []        |
+     tin                |                                               |
+     unicode-han-tra... |                                               |
+     unicode-transla... |                                               |
+     util-linux-ng      |                                               |
+     vice               |                                               |
+     vmm                |                                               |
+     vorbis-tools       |                                               |
+     wastesedge         |                                               |
+     wdiff              |                                               |
+     wget               |             []                                |
+     wyslij-po          |                                               |
+     xchat              | []             [] []                          |
+     xdg-user-dirs      | [] []       [] [] []       []       [] []     |
+     xkeyboard-config   | []    []    []                                |
+                        +-----------------------------------------------+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                          20  5 10  1 13 48  4  2  2  4 24 10 20  3   1
+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                        +---------------------------------------------------+
+     a2ps               | []           []     []  []   [] []       []    [] |
+     aegis              | []                      []      []                |
+     ant-phone          |                         []   []                   |
+     anubis             | []           []                 []                |
+     aspell             | []                           [] []    [] []       |
+     bash               | []                                    []          |
+     bfd                |                                 []                |
+     bibshelf           | []  []                                            |
+     binutils           |                                 []    []          |
+     bison              | []           []                 []                |
+     bison-runtime      | []           []     []  []   [] []       []       |
+     bluez-pin          | []           []         []   [] []    [] []    [] |
+     bombono-dvd        |     []                          ()                |
+     buzztard           | []  []                                            |
+     cflow              |              []                                   |
+     clisp              | []                              []                |
+     coreutils          | []           []     []  []      []       []       |
+     cpio               | []           []                 []                |
+     cppi               |              []                                   |
+     cpplib             | []                                                |
+     cryptsetup         | []                                                |
+     dfarc              |              []                                   |
+     dialog             | []           []         []      []                |
+     dico               |              []                                   |
+     diffutils          | []           []         []   [] []             [] |
+     dink               | ()                                                |
+     doodle             | []                                          []    |
+     e2fsprogs          | []           []                                   |
+     enscript           | []                      []   [] []       []       |
+     exif               | []           []              [] ()    []          |
+     fetchmail          | []           []                 []          []    |
+     findutils          | []           []     []          []       []       |
+     flex               | []           []         []   [] []                |
+     freedink           | []           []                                   |
+     gas                |                                                   |
+     gawk               | []           []         []   []                   |
+     gcal               |                                                   |
+     gcc                |                                                [] |
+     gettext-examples   | []           []     []       [] []    [] []    [] |
+     gettext-runtime    | []  []       []     []       [] []    [] []    [] |
+     gettext-tools      |              []              [] []    [] []    [] |
+     gip                | []           []                 []    []       [] |
+     gjay               |                                                   |
+     gliv               | []           []         []   [] []    []          |
+     glunarclock        | []                      []   []       []       [] |
+     gnubiff            | []                           ()                   |
+     gnucash            | []           ()         ()      ()                |
+     gnuedu             | []                                                |
+     gnulib             | []           []                 []       []       |
+     gnunet             |                                                   |
+     gnunet-gtk         |                                                   |
+     gnutls             | []           []                                   |
+     gold               |                                                   |
+     gpe-aerial         | []                  []  []   [] []       []    [] |
+     gpe-beam           | []                  []  []   [] []       []    [] |
+     gpe-bluetooth      | []                      []                        |
+     gpe-calendar       |                         []      []       []    [] |
+     gpe-clock          | []                  []  []   [] []    [] []    [] |
+     gpe-conf           | []                  []  []   [] []    [] []       |
+     gpe-contacts       |                         []   [] []       []    [] |
+     gpe-edit           | []           []                          []       |
+     gpe-filemanager    | []                              []       []       |
+     gpe-go             | []           []         []   [] []    [] []    [] |
+     gpe-login          | []                      []                        |
+     gpe-ownerinfo      | []                  []  []   [] []    [] []    [] |
+     gpe-package        | []                                       []       |
+     gpe-sketchbook     | []                  []  []   [] []       []    [] |
+     gpe-su             | []                  []  []   [] []    [] []    [] |
+     gpe-taskmanager    | []                  []  []   [] []    [] []    [] |
+     gpe-timesheet      | []                  []  []   [] []    [] []    [] |
+     gpe-today          | []                  []  []   [] []    [] []    [] |
+     gpe-todo           | []                      []      []       []    [] |
+     gphoto2            | []        [] []         []   [] []    []       [] |
+     gprof              | []                      []   []                   |
+     gpsdrive           | []                              []                |
+     gramadoir          | []                                    []          |
+     grep               | []           []                 []    []          |
+     grub               | []           []                 []                |
+     gsasl              | []           []                       []       [] |
+     gss                |              []              []       []          |
+     gst-plugins-bad    | []           []         []      []    []    []    |
+     gst-plugins-base   | []           []         []      []    []          |
+     gst-plugins-good   | []           []         []      []    []          |
+     gst-plugins-ugly   | []           []         []      []    [] []       |
+     gstreamer          | []           []         []      []    []          |
+     gtick              | []                              []    []          |
+     gtkam              | []        [] []         []      []    []          |
+     gtkorphan          | []                                                |
+     gtkspell           | []           []     []  []   [] []    [] [] [] [] |
+     gutenprint         | []                              []                |
+     hello              | []           []                       [] []       |
+     help2man           |              []                 []                |
+     hylafax            | []                                                |
+     idutils            | []           []         []   [] []                |
+     indent             | []           []         []   [] []    []       [] |
+     iso_15924          | []           []                 []       []       |
+     iso_3166           | []  [] [] [] []     ()  []   [] [] [] [] [] [] [] |
+     iso_3166_2         | []           []                          []       |
+     iso_4217           | []  []       []     []          [] []    []    [] |
+     iso_639            | []     [] [] []                 [] [] [] []    [] |
+     iso_639_3          |        [] []                                      |
+     jwhois             | []           []         []   []                   |
+     kbd                | []           []              []                   |
+     keytouch           | []           []                       []          |
+     keytouch-editor    | []           []                       []          |
+     keytouch-keyboa... | []           []                       []          |
+     klavaro            | []                      []                        |
+     latrine            |              []                 []                |
+     ld                 |                                                   |
+     leafpad            | []  []       []     []  []      []    [] []    [] |
+     libc               | []           []                 []    []          |
+     libexif            | []           []         ()            []          |
+     libextractor       |                                                   |
+     libgnutls          | []           []                                   |
+     libgpewidget       | []           []                          []       |
+     libgpg-error       |              []              []                   |
+     libgphoto2         | []           []                                   |
+     libgphoto2_port    | []           []         []      []    []          |
+     libgsasl           | []           []              []       []       [] |
+     libiconv           | []           []                       [] []    [] |
+     libidn             | []           []                                   |
+     lifelines          | []           []                                   |
+     liferea            | []           []     []  []   [] ()    ()    []    |
+     lilypond           | []                                                |
+     linkdr             | []                  []          []                |
+     lordsawar          |                                                   |
+     lprng              |              []                                   |
+     lynx               | []                      []      []                |
+     m4                 | []           []         []   [] []                |
+     mailfromd          |              []                                   |
+     mailutils          |              []                                   |
+     make               | []           []         []      []                |
+     man-db             | []           []                 []                |
+     man-db-manpages    | []           []                 []                |
+     minicom            |              []         []   [] []                |
+     mkisofs            | []           []                 []                |
+     myserver           |                                                   |
+     nano               | []           []         []      []                |
+     opcodes            | []                           []                   |
+     parted             | []           []                 []    []          |
+     pies               |              []                                   |
+     popt               | []           []     []          []                |
+     psmisc             | []           []                 []                |
+     pspp               | []                      []                        |
+     pwdutils           |              []                                   |
+     radius             | []           []                 []                |
+     recode             | []           []     []  []   [] []    [] []       |
+     rosegarden         |              ()                 ()                |
+     rpm                | []           []     []                            |
+     rush               | []           []                                   |
+     sarg               |                                                   |
+     screem             |                                                   |
+     scrollkeeper       | []  []       []              [] []    []    [] [] |
+     sed                | []           []     []  []   [] []    [] []    [] |
+     sharutils          | []           []                 []             [] |
+     shishi             |              []                                   |
+     skencil            |                     []  []                        |
+     solfege            | []           []         []      []                |
+     solfege-manual     | []           []         []                        |
+     soundtracker       |                                       []          |
+     sp                 |                                                   |
+     sysstat            | []           []         []      []                |
+     tar                | []           []                 []       []       |
+     texinfo            | []           []              [] []                |
+     tin                |                                 []                |
+     unicode-han-tra... |                                                   |
+     unicode-transla... |                                                   |
+     util-linux-ng      | []           []         []      []       []       |
+     vice               | []                                                |
+     vmm                | []                                                |
+     vorbis-tools       | []           []                                   |
+     wastesedge         | []                                                |
+     wdiff              | []           []                                   |
+     wget               | []           []     []  []      []    [] []       |
+     wyslij-po          | []  []       []                                   |
+     xchat              | []        [] []     []          []    [] [] [] [] |
+     xdg-user-dirs      | []  [] [] [] []  [] []  []   [] []    [] [] [] [] |
+     xkeyboard-config   | []           []                 []                |
+                        +---------------------------------------------------+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                          135 10  4  7 105  1 29  62   47 91  3 54 46  9 37
+
+                          sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+                        +---------------------------------------------------+
+     a2ps               | []              [] [] [] []                       | 27
+     aegis              |                          []                       |  9
+     ant-phone          | []                 []    []      []               |  9
+     anubis             | []                 [] [] []                       | 15
+     aspell             |                       [] []  []                   | 20
+     bash               | []                    [] []                       | 12
+     bfd                |                          []                       |  6
+     bibshelf           | []                       []      []               | 16
+     binutils           |                       [] []                       |  8
+     bison              | []                       []                       | 12
+     bison-runtime      | []              []    [] []      []          []   | 29
+     bluez-pin          | []              [] [] [] []  []  []          []   | 37
+     bombono-dvd        |                          []                       |  4
+     buzztard           |                          []                       |  7
+     cflow              |                       [] []      []               |  9
+     clisp              |                                                   | 10
+     coreutils          | []                    [] []      []               | 22
+     cpio               | []                 [] [] []      []          []   | 13
+     cppi               |                       [] []                       |  5
+     cpplib             | []                 [] [] []      []          []   | 14
+     cryptsetup         | []                       []                       |  7
+     dfarc              |                          []                       |  9
+     dialog             | []  []          []       []  []  []          []   | 30
+     dico               |                       []                          |  2
+     diffutils          | []                 [] [] []      []          []   | 30
+     dink               |                                                   |  4
+     doodle             | []                       []                       |  7
+     e2fsprogs          | []                 []    []                       | 11
+     enscript           | []                 [] [] []                       | 17
+     exif               | []                       []      []               | 16
+     fetchmail          |                    []    []      []               | 17
+     findutils          | []                 [] [] []      []               | 20
+     flex               | []                 []    []                  []   | 15
+     freedink           |                          []                       | 10
+     gas                |                    []                             |  4
+     gawk               | []                 []    []      []               | 18
+     gcal               | []                 []                             |  5
+     gcc                | []                 []            []               |  7
+     gettext-examples   | []                 [] [] []      []    []    []   | 34
+     gettext-runtime    | []                 [] [] []      []    []    []   | 29
+     gettext-tools      | []                 [] [] []      []          []   | 22
+     gip                | []                       []      []          []   | 22
+     gjay               |                          []                       |  3
+     gliv               | []                 []    []                       | 14
+     glunarclock        | []                       []  []  []          []   | 19
+     gnubiff            | []                       []                       |  4
+     gnucash            |                    () [] ()      []          ()   | 10
+     gnuedu             |                          []                  []   |  7
+     gnulib             | []                    [] []      []               | 16
+     gnunet             |                          []                       |  1
+     gnunet-gtk         | []                 []    []                       |  5
+     gnutls             | []                       []      []               | 10
+     gold               |                          []                       |  4
+     gpe-aerial         | []                       []      []               | 18
+     gpe-beam           | []                       []      []               | 19
+     gpe-bluetooth      | []                       []      []               | 13
+     gpe-calendar       | []                       []  []  []               | 12
+     gpe-clock          | []                 []    []  []  []               | 28
+     gpe-conf           | []                       []  []  []               | 20
+     gpe-contacts       | []                       []      []               | 17
+     gpe-edit           | []                       []      []               | 12
+     gpe-filemanager    | []                       []  []  []               | 16
+     gpe-go             | []                 []    []  []  []               | 25
+     gpe-login          | []                       []      []               | 11
+     gpe-ownerinfo      | []                 []    []      []          []   | 25
+     gpe-package        | []                       []      []               | 13
+     gpe-sketchbook     | []                       []      []               | 20
+     gpe-su             | []                 []    []  []  []               | 30
+     gpe-taskmanager    | []                 []    []  []  []               | 29
+     gpe-timesheet      | []                 []    []      []          []   | 25
+     gpe-today          | []                 []    []  []  []          []   | 30
+     gpe-todo           | []                       []  []  []               | 17
+     gphoto2            | []                    [] []      []          []   | 24
+     gprof              | []                 []    []                       | 15
+     gpsdrive           | []                       []      []               | 11
+     gramadoir          | []                       []      []               | 11
+     grep               |                 []       []      []               | 10
+     grub               | []                       []      []               | 14
+     gsasl              | []                       []      []          []   | 14
+     gss                | []                       []      []               | 11
+     gst-plugins-bad    | []                 []    []      []               | 26
+     gst-plugins-base   | []                 [] [] []      []               | 24
+     gst-plugins-good   | []                 []    []      []               | 24
+     gst-plugins-ugly   | []                 [] [] []      []               | 29
+     gstreamer          | []                    [] []      []               | 22
+     gtick              |                       [] []      []               | 13
+     gtkam              | []                       []      []               | 20
+     gtkorphan          | []                       []      []               | 14
+     gtkspell           | []              [] [] [] []  []  []    []    []   | 45
+     gutenprint         | []                                                | 10
+     hello              | []              [] []    []      []          []   | 21
+     help2man           | []                       []                       |  7
+     hylafax            |                          []                       |  5
+     idutils            | []                 []    []      []               | 17
+     indent             | []                 [] [] []      []          []   | 30
+     iso_15924          |                 ()    [] ()      []          []   | 16
+     iso_3166           | []        []    () [] [] ()  []  []    []    ()   | 53
+     iso_3166_2         |                 ()    [] ()      []               |  9
+     iso_4217           | []              () [] [] ()      []    []         | 26
+     iso_639            | []     [] []    ()    [] ()  []  []    []    []   | 38
+     iso_639_3          |        []                ()                       |  8
+     jwhois             | []                 []    []      []          []   | 16
+     kbd                | []                 [] [] []      []               | 15
+     keytouch           | []                       []      []               | 16
+     keytouch-editor    | []                       []      []               | 14
+     keytouch-keyboa... | []                       []      []               | 14
+     klavaro            |                          []                       | 11
+     latrine            |                    []    []      []               | 10
+     ld                 | []                 []    []                  []   | 11
+     leafpad            | []                 [] [] []      []          []   | 33
+     libc               | []                 []    []      []          []   | 21
+     libexif            |                          []      ()               |  7
+     libextractor       |                          []                       |  1
+     libgnutls          | []                       []      []               |  9
+     libgpewidget       | []                       []      []               | 14
+     libgpg-error       | []                       []      []               |  9
+     libgphoto2         |                       [] []                       |  8
+     libgphoto2_port    | []                    [] []                  []   | 14
+     libgsasl           | []                       []      []               | 13
+     libiconv           | []                       []  []  []               | 21
+     libidn             | ()                       []      []               | 11
+     lifelines          | []                                                |  4
+     liferea            | []                 []            []               | 21
+     lilypond           |                          []                       |  7
+     linkdr             | []                 []    []      []          []   | 17
+     lordsawar          |                                                   |  1
+     lprng              |                          []                       |  3
+     lynx               | []                 [] [] []                       | 17
+     m4                 | []                       []      []          []   | 19
+     mailfromd          |                       [] []                       |  3
+     mailutils          |                          []                       |  5
+     make               | []                 []    []      []               | 21
+     man-db             | []                       []      []               |  8
+     man-db-manpages    |                                                   |  4
+     minicom            | []                       []                       | 16
+     mkisofs            |                          []      []               |  9
+     myserver           |                                                   |  0
+     nano               | []                       []      []          []   | 21
+     opcodes            | []                 []    []                       | 11
+     parted             | []                 [] [] []                  []   | 15
+     pies               |                       [] []                       |  3
+     popt               | []              [] []    []      []          []   | 27
+     psmisc             | []                       []                       | 11
+     pspp               |                                                   |  4
+     pwdutils           | []                       []                       |  6
+     radius             |                       [] []                       |  9
+     recode             | []                 []    []      []               | 28
+     rosegarden         | ()                                                |  0
+     rpm                | []                       []                  []   | 11
+     rush               |                       [] []                       |  4
+     sarg               |                                                   |  1
+     screem             |                          []                       |  3
+     scrollkeeper       | []                 [] [] []                  []   | 27
+     sed                | []                 []    []      []          []   | 30
+     sharutils          | []                 []    []      []          []   | 22
+     shishi             |                          []                       |  3
+     skencil            | []                       []                       |  7
+     solfege            | []                 []    []      []               | 16
+     solfege-manual     |                    []                             |  8
+     soundtracker       | []                 []    []                       |  9
+     sp                 |                    []                             |  3
+     sysstat            |                          []      []               | 15
+     tar                | []                 [] [] []      []          []   | 23
+     texinfo            | []                 [] [] []      []               | 17
+     tin                |                                                   |  4
+     unicode-han-tra... |                                                   |  0
+     unicode-transla... |                                                   |  2
+     util-linux-ng      | []                 [] [] []                       | 20
+     vice               | ()                 ()                             |  1
+     vmm                |                          []                       |  4
+     vorbis-tools       |                          []                       |  6
+     wastesedge         |                                                   |  2
+     wdiff              | []                       []                       |  7
+     wget               | []                 []    []      []          []   | 26
+     wyslij-po          |                       [] []                       |  8
+     xchat              | []              []    [] []      []          []   | 36
+     xdg-user-dirs      | []     [] []    [] [] [] []      []    []    []   | 63
+     xkeyboard-config   | []                    [] []                       | 22
+                        +---------------------------------------------------+
+       85 teams           sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+      178 domains         119  1  3  3  0 10 65 51 155 17  98     7    41    2618
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer.  There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+   If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..6539881
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,88 @@
+-----------------------------------
+
+GNU make development up to version 3.75 by:
+    Roland McGrath <roland@gnu.org>
+
+
+Development starting with GNU make 3.76 by:
+    Paul D. Smith <psmith@gnu.org>
+
+    Additional development starting with GNU make 3.81 by:
+        Boris Kolpackov <boris@kolpackov.net>
+
+
+GNU Make User's Manual
+  Written by:
+    Richard M. Stallman <rms@gnu.org>
+
+  Edited by:
+    Roland McGrath <roland@gnu.org>
+    Bob Chassell <bob@gnu.org>
+    Melissa Weisshaus <melissa@gnu.org>
+    Paul D. Smith <psmith@gnu.org>
+
+-----------------------------------
+GNU make porting efforts:
+
+  Port to VMS by:
+      Klaus Kaempf <kkaempf@progis.de>
+      Hartmut Becker <Hartmut.Becker@hp.com>
+      Archive support/Bug fixes by:
+        John W. Eaton <jwe@bevo.che.wisc.edu>
+        Martin Zinser <zinser@decus.decus.de>
+
+  Port to Amiga by:
+      Aaron Digulla <digulla@fh-konstanz.de>
+
+  Port to MS-DOS (DJGPP), OS/2, and MS-Windows (native/MinGW) by:
+      DJ Delorie <dj@delorie.com>
+      Rob Tulloh <rob_tulloh@tivoli.com>
+      Eli Zaretskii <eliz@gnu.org>
+      Jonathan Grant <jg@jguk.org>
+      Andreas Beuning <andreas.buening@nexgo.de>
+      Earnie Boyd <earnie@uses.sf.net>
+      Troy Runkel <Troy.Runkel@mathworks.com>
+
+-----------------------------------
+Other contributors:
+
+  Janet Carson <janet_carson@tivoli.com>
+  Howard Chu <hyc@highlandsun.com>
+  Ludovic Courtès <ludo@gnu.org>
+  Paul Eggert <eggert@twinsun.com>
+  Ramon Garcia Fernandez <ramon.garcia.f@gmail.com>
+  Klaus Heinz <kamar@ease.rhein-main.de>
+  Michael Joosten
+  Jim Kelton <jim_kelton@tivoli.com>
+  David Lubbren <uhay@rz.uni-karlsruhe.de>
+  Tim Magill <tim.magill@telops.gte.com>
+  Markus Mauhart <qwe123@chello.at>
+  Greg McGary <greg@mcgary.org>
+  Thien-Thi Nguyen <ttn@gnuvola.org>
+  Thomas Riedl <thomas.riedl@siemens.com>
+  Han-Wen Nienhuys <hanwen@cs.uu.nl>
+  Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+  Carl Staelin (Princeton University)
+  Ian Stewartson (Data Logic Limited)
+  David A. Wheeler <dwheeler@dwheeler.com>
+  David Boyce <dsb@boyski.com>
+  Frank Heckenbach <f.heckenbach@fh-soft.de>
+
+With suggestions/comments/bug reports from a cast of ... well ...
+hundreds, anyway :)
+
+-------------------------------------------------------------------------------
+Copyright (C) 1997-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..94a9ed0
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..095b1eb
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,231 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.DOS b/Makefile.DOS
new file mode 100644
index 0000000..43753e4
--- /dev/null
+++ b/Makefile.DOS
@@ -0,0 +1,818 @@
+# -*-Makefile-*- template for DJGPP
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+#
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+SHELL = /bin/sh
+
+srcdir = .
+VPATH = $(srcdir)
+# $DJDIR is defined automatically by DJGPP to point
+# to the root of the DJGPP installation tree.
+prefix = /dev/env/DJDIR
+exec_prefix = ${prefix}
+
+bindir = /bin
+datadir = /share
+libdir = /lib
+infodir = /info
+mandir = /man
+includedir = /include
+oldincludedir = c:/djgpp/include
+
+DESTDIR = /dev/env/DJDIR
+
+pkgdatadir = $(datadir)/make
+pkglibdir = $(libdir)/make
+pkgincludedir = $(includedir)/make
+localedir = $(datadir)/locale
+
+INSTALL = ${exec_prefix}/bin/ginstall -c
+INSTALL_PROGRAM = ${exec_prefix}/bin/ginstall -c
+INSTALL_DATA = ${exec_prefix}/bin/ginstall -c -m 644
+INSTALL_SCRIPT = ${exec_prefix}/bin/ginstall -c
+transform = s,x,x,
+
+# This will fail even if they don't have a Unix-like shell (stock DOS
+# shell doesn't know about `false').  The only difference is that they
+# get "Error -1" instead of "Error 1".
+EXIT_FAIL = false
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+EXEEXT = .exe
+OBJEXT = o
+
+AR = ar
+AWK = gawk
+CC = gcc
+CPP = gcc -E
+LIBOBJS =
+MAKEINFO = ${exec_prefix}/bin/makeinfo
+PACKAGE = make
+PERL = perl
+RANLIB = ranlib
+REMOTE = stub
+VERSION = 4.1
+
+AUTOMAKE_OPTIONS = 1.2
+
+bin_PROGRAMS =	make$(EXEEXT)
+
+make_SOURCES =	ar.c arscan.c commands.c default.c dir.c expand.c file.c function.c getopt.c getopt1.c guile.c implicit.c job.c load.c loadapi.c main.c misc.c output.c read.c remake.c rule.c signame.c strcache.c variable.c version.c vpath.c hash.c remote-$(REMOTE).c
+# This should include the glob/ prefix
+libglob_a_SOURCES =	glob/fnmatch.c glob/glob.c glob/fnmatch.h glob/glob.h
+make_LDADD =	  glob/libglob.a
+
+man_MANS =	make.1
+
+INCLUDES =	-I$(srcdir)/glob -DLIBDIR=\"$(prefix)$(libdir)\" -DINCLUDEDIR=\"$(prefix)$(includedir)\" -DLOCALEDIR=\"$(prefix)$(localedir)\"
+
+BUILT_SOURCES =	README build.sh-in
+
+EXTRA_DIST =	$(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c  make-stds.texi texinfo.tex SCOPTIONS SMakefile  Makefile.ami README.Amiga config.ami amiga.c amiga.h  NMakefile README.DOS configh.dos configure.bat makefile.com  README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk  config.h-vms makefile.vms README.VMS vmsdir.h vmsfunctions.c  vmsify.c gmk-default.scm gmk-default.h
+
+SUBDIRS =	glob doc
+mkinstalldirs = ${exec_prefix}/bin/gmkdir -p
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =  build.sh
+PROGRAMS =  $(bin_PROGRAMS)
+
+MAKE_HOST = i386-pc-msdosdjgpp
+
+
+DEFS =  -I. -I$(srcdir) -I.
+CPPFLAGS = -DHAVE_CONFIG_H
+LDFLAGS =
+LIBS =
+make_OBJECTS =  ar.o arscan.o commands.o default.o dir.o expand.o file.o function.o getopt.o getopt1.o guile.o implicit.o job.o load.o loadapi.o main.o misc.o output.o read.o remake.o rule.o signame.o strcache.o variable.o version.o vpath.o hash.o remote-$(REMOTE).o
+make_DEPENDENCIES =    glob/libglob.a
+make_LDFLAGS =
+libglob_a_LIBADD =
+libglob_a_OBJECTS =  fnmatch.o glob.o
+noinst_LIBRARIES =	glob/libglob.a
+CFLAGS = -O2 -g
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+TEXI2DVI = texi2dvi
+TEXINFO_TEX = $(srcdir)/config/texinfo.tex
+INFO_DEPS = doc/make.info
+DVIS = doc/make.dvi
+TEXINFOS = doc/make.texi
+noinst_TEXINFOS = doc/fdl.texi doc/make-stds.texi
+man1dir = $(mandir)/man1
+MANS = $(man_MANS)
+
+NROFF = nroff
+DIST_COMMON =  README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am  Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh-in config.h-in  configure configure.ac getloadavg.c
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP = --best
+SOURCES = $(make_SOURCES)
+OBJECTS = $(make_OBJECTS)
+HEADERS = $(wildcard $(srcdir)/*.h)
+
+default: all
+
+.SUFFIXES:
+.SUFFIXES: .c .dvi .info .o .obj .ps .texi .tex .html
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f config.h
+
+maintainer-clean-hdr:
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do    if test -f $$p; then      echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`";       $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`;    else :; fi;  done
+
+uninstall-binPROGRAMS:
+	$(NORMAL_UNINSTALL)
+	list='$(bin_PROGRAMS)'; for p in $$list; do    rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`.exe;  done
+
+.c.o:
+	$(COMPILE) -c $<
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) *$(EXEEXT) make.new core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c *_tab.c
+
+maintainer-clean-compile:
+
+make$(EXEEXT): $(make_OBJECTS) $(make_DEPENDENCIES)
+	@command.com /c if exist make del make
+	@command.com /c if exist make.exe del make.exe
+	$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
+
+# Documentation
+
+make.info: make.texi
+make.dvi: make.texi
+make.ps: make.dvi make.texi
+make.html: make.texi
+
+
+DVIPS = dvips
+
+.texi.info:
+	@command.com /c if exist make.info* del make.info*
+	@command.com /c if exist make.i* del make.i*
+	$(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
+
+.texi:
+	@command.com /c if exist make.info* del make.info*
+	@command.com /c if exist make.i* del make.i*
+	$(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
+
+.texi.dvi:
+	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.dvi.ps:
+	$(DVIPS) $< -o $@
+
+# Other documentation formats
+
+html: html-recursive
+
+.texi.html:
+	@command.com /c if exist make.html* del make.html*
+	$(MAKEINFO) --html -I$(srcdir) --no-split $< -o ./$@
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(infodir)
+	@for file in $(INFO_DEPS); do    iifile=`echo $$file | sed "s|doc/||"`;    d=$(srcdir);    for ifile in `cd $$d && echo $$file`; do      if test -f $$d/$$ifile; then        echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$iifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$iifile; else : ; fi;    done;  done
+	@$(POST_INSTALL)
+	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    for file in $(INFO_DEPS); do    iifile=`echo $$file | sed "s|doc/||"`;      echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$iifile";     install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$iifile || :;   done;  else : ; fi
+
+uninstall-info:
+	$(PRE_UNINSTALL)
+	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    ii=yes;  else ii=; fi;  for file in $(INFO_DEPS); do    test -z $ii || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file;  done
+	$(NORMAL_UNINSTALL)
+	for file in $(INFO_DEPS); do (cd $(DESTDIR)$(infodir) && rm -f $$file);  done
+
+dist-info: $(INFO_DEPS)
+	for base in $(INFO_DEPS); do    d=$(srcdir);    for file in `cd $$d && eval echo $$base*`; do      test -f $(distdir)/$$file      || ln $$d/$$file $(distdir)/$$file 2> /dev/null      || cp -p $$d/$$file $(distdir)/$$file;    done;  done
+
+mostlyclean-aminfo:
+	-rm -f $(srcdir)/doc/make.aux $(srcdir)/doc/make.cp $(srcdir)/doc/make.cps $(srcdir)/doc/make.dvi \
+	  $(srcdir)/doc/make.fn $(srcdir)/doc/make.fns $(srcdir)/doc/make.ky $(srcdir)/doc/make.kys \
+	  $(srcdir)/doc/make.ps $(srcdir)/doc/make.log $(srcdir)/doc/make.pg $(srcdir)/doc/make.toc \
+	  $(srcdir)/doc/make.tp $(srcdir)/doc/make.tps $(srcdir)/doc/make.vr $(srcdir)/doc/make.vrs \
+	  $(srcdir)/doc/make.op $(srcdir)/doc/make.tr $(srcdir)/doc/make.cv $(srcdir)/doc/make.cn \
+	  $(srcdir)/doc/make.html
+
+clean-aminfo:
+
+distclean-aminfo:
+
+maintainer-clean-aminfo:
+	for i in $(INFO_DEPS); do rm -f $$i*; done
+
+install-man1:
+	$(mkinstalldirs) $(DESTDIR)$(man1dir)
+	@list='$(man1_MANS)'; \
+	l2='$(man_MANS)'; for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+	done
+
+uninstall-man1:
+	@list='$(man1_MANS)'; \
+	l2='$(man_MANS)'; for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
+	done
+install-man: $(MANS)
+	@$(NORMAL_INSTALL)
+	$(MAKE) install-man1
+uninstall-man:
+	@$(NORMAL_UNINSTALL)
+	$(MAKE) uninstall-man1
+
+# Assume that the only thing to do in glob is to build libglob.a,
+# but do a sanity check: if $SUBDIRS will ever have more than
+# a single directory, yell bloody murder.
+all-recursive:
+ifeq ($(findstring glob, $(SUBDIRS)), glob)
+	@command.com /c if not exist glob\\nul md glob
+	@echo Making all in glob
+	$(MAKE) -C glob -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
+endif
+
+$(SUBDIRS):
+	command.com /c md $@
+
+libglob.a: $(libglob_a_OBJECTS)
+	command.com /c if exist libglob.a del libglob.a
+	$(AR) cru libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
+	$(RANLIB) libglob.a
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive check-recursive:
+ifeq ($(words $(SUBDIRS)), 2)
+	@echo Making $(shell echo $@ | sed s/-recursive//) in glob
+	$(MAKE) -C glob -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+	@echo Making $(shell echo $@ | sed s/-recursive//) in doc
+	$(MAKE) -C doc -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+else
+	@echo FATAL: There is more than two directory in "($(SUBDIRS))"
+	@$(EXIT_FAIL)
+endif
+
+tags-in-glob: $(libglob_a_SOURCES)
+	etags $(addprefix $(srcdir)/,$^) -o ./glob/TAGS
+
+tags-recursive:
+ifeq ($(words $(SUBDIRS)), 2)
+	$(MAKE) tags-in-glob
+else
+	@echo FATAL: There is more than two directory in "($(SUBDIRS))"
+	@$(EXIT_FAIL)
+endif
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES)
+	mkid $(srcdir)/$(SOURCES) $(srcdir)/$(libglob_a_SOURCES) ./config.h $(HEADERS)
+
+TAGS: tags-recursive $(HEADERS) $(srcdir)/$(SOURCES) config.h $(TAGS_DEPENDENCIES)
+	etags -i ./glob/TAGS $(ETAGS_ARGS) $(srcdir)/$(SOURCES) ./config.h $(HEADERS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`;  cd $(distdir)/=build    && ../configure --srcdir=.. --prefix=$$dc_install_base    && $(MAKE)    && $(MAKE) dvi    && $(MAKE) check    && $(MAKE) install    && $(MAKE) installcheck    && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================";  echo "$(distdir).tar.gz is ready for distribution";  echo "========================"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
+distdir: $(DISTFILES)
+	rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do d=$(srcdir); test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; for subdir in $(SUBDIRS); do test -d $(distdir)/$$subdir || mkdir $(distdir)/$$subdir || exit 1; chmod 777 $(distdir)/$$subdir; (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir)/$$subdir distdir=../$(distdir)/$$subdir distdir) || exit 1; done
+	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
+	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
+
+info: info-recursive
+info-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+	@command.com /c if not exist doc\\nul md doc
+	@echo Making all in doc
+	$(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.info
+endif
+
+dvi: dvi-recursive
+dvi-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+	@command.com /c if not exist doc\\nul md doc
+	@echo Making all in doc
+	$(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.dvi
+endif
+
+ps: ps-recursive
+ps-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+	@command.com /c if not exist doc\\nul md doc
+	@echo Making all in doc
+	$(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.ps
+endif
+
+html-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+	@command.com /c if not exist doc\\nul md doc
+	@echo Making all in doc
+	$(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.html
+endif
+
+check: all-am check-recursive check-local
+	@:
+installcheck: installcheck-recursive
+all-recursive-am: config.h
+	$(MAKE) all-recursive
+
+all-am: Makefile $(PROGRAMS) config.h info
+
+install-exec-am: install-binPROGRAMS
+
+install-data-am: install-info-am
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info
+
+install-exec: install-exec-recursive install-exec-am
+	@$(NORMAL_INSTALL)
+
+install-data: install-data-recursive install-data-am
+	@$(NORMAL_INSTALL)
+
+install-recursive uninstall-recursive:
+	@:
+
+install: install-recursive install-exec-am install-data-am
+	@:
+
+uninstall: uninstall-recursive uninstall-am
+
+all: all-recursive-am all-am
+
+install-strip:
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs: installdirs-recursive
+	$(mkinstalldirs)  $(bindir) $(infodir)
+
+
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f Makefile $(DISTCLEANFILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS  mostlyclean-compile mostlyclean-aminfo mostlyclean-tags  mostlyclean-generic
+
+clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo  clean-tags clean-generic mostlyclean-am
+
+distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile  distclean-aminfo distclean-tags distclean-generic  clean-am
+
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS  maintainer-clean-compile maintainer-clean-aminfo  maintainer-clean-tags maintainer-clean-generic  distclean-am
+
+mostlyclean:  mostlyclean-recursive mostlyclean-am
+
+clean: clean-noinstLIBRARIES clean-recursive clean-am
+
+distclean:  distclean-recursive distclean-am
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-recursive maintainer-clean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f config.status
+
+.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
+maintainer-clean-hdr mostlyclean-binPROGRAMS distclean-binPROGRAMS \
+clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
+install-binPROGRAMS mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile install-info-am uninstall-info \
+mostlyclean-aminfo distclean-aminfo clean-aminfo \
+maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive check-am \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir \
+mostlyclean-depend distclean-depend clean-depend \
+maintainer-clean-depend info dvi check-local installcheck \
+all-recursive-am all-am install-exec-am install-data-am uninstall-am \
+install-exec install-data install uninstall all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean \
+html
+
+
+# --------------- Local DIST Section
+
+# Install the w32 subdirectory
+#
+dist-hook:
+	(cd $(srcdir); \
+	 w32=`find w32 -follow \( -name .git -prune \) -o -type f -print`; \
+	 tar chf - $$w32) \
+	| (cd $(distdir); tar xfBp -)
+
+# --------------- Local CHECK Section
+
+# Note: check-loadavg is NOT a prerequisite of check-local, since
+# there's no uptime utility, and the test it does doesn't make sense
+# on MSDOS anyway.
+check-local: check-shell check-regression
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-shell check-regression
+
+# > check-shell
+#
+# check-shell is designed to fail if they don't have a Unixy shell
+# installed.  The test suite requires such a shell.
+check-shell:
+	@echo If Make says Error -1, you do not have Unix-style shell installed
+	@foo=bar.exe :
+
+# > check-loadavg
+#
+loadavg: loadavg.c config.h
+	@rm -f loadavg
+	$(LINK) -DTEST $(make_LDFLAGS) loadavg.c $(LIBS)
+# We copy getloadavg.c into a different file rather than compiling it
+# directly because some compilers clobber getloadavg.o in the process.
+loadavg.c: getloadavg.c
+	ln $(srcdir)/getloadavg.c loadavg.c || \
+	cp $(srcdir)/getloadavg.c loadavg.c
+check-loadavg: loadavg
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code believes:
+	-./loadavg
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found.  Look in MAKE_TEST if
+# specified, or else in the srcdir or the distdir, their parents, and _their_
+# parents.
+#
+check-regression:
+	@if test -f "$(srcdir)/tests/run_make_tests"; then \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		   rm -rf tests/$$f; cp -pr $(srcdir)/tests/$$f tests; \
+		 done ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	 else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	 fi
+
+# --------------- Maintainer's Section
+
+# Note this requires GNU make.  Not to worry, since it will only be included
+# in the Makefile if we're in the maintainer's environment.
+#include $(srcdir)/maintMakefile
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+# --------------- DEPENDENCIES
+
+# --------------- DEPENDENCIES
+#
+
+# .deps/alloca.Po
+# dummy
+
+# .deps/ar.Po
+ar.o: ar.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+
+# .deps/arscan.Po
+arscan.o: arscan.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/commands.Po
+commands.o: commands.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h
+
+# .deps/default.Po
+default.o: default.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h variable.h rule.h dep.h job.h output.h \
+ commands.h
+
+# .deps/dir.Po
+dir.o: dir.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h filedef.h dep.h \
+
+# .deps/expand.Po
+expand.o: expand.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/file.Po
+file.o: file.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h \
+ debug.h
+
+# .deps/function.Po
+function.o: function.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h job.h output.h \
+ commands.h debug.h
+
+# .deps/getloadavg.Po
+# dummy
+
+# .deps/getopt.Po
+getopt.o: getopt.c config.h \
+
+# .deps/getopt1.Po
+getopt1.o: getopt1.c config.h getopt.h \
+
+# .deps/guile.Po
+guile.o: guile.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ dep.h variable.h \
+ gmk-default.h
+
+# .deps/hash.Po
+hash.o: hash.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/implicit.Po
+implicit.o: implicit.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h rule.h \
+ dep.h debug.h variable.h job.h output.h \
+ commands.h
+
+# .deps/job.Po
+job.o: job.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+ debug.h filedef.h hash.h \
+ commands.h variable.h
+
+# .deps/load.Po
+load.o: load.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ variable.h
+
+# .deps/loadapi.Po
+loadapi.o: loadapi.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h
+
+# .deps/loadavg-getloadavg.Po
+# dummy
+
+# .deps/main.Po
+main.o: main.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h rule.h debug.h \
+ getopt.h
+
+# .deps/misc.Po
+misc.o: misc.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ debug.h \
+
+# .deps/output.Po
+output.o: output.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+
+# .deps/read.Po
+read.o: read.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h \
+ debug.h
+
+# .deps/remake.Po
+remake.o: remake.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h dep.h variable.h \
+ debug.h
+
+# .deps/remote-cstms.Po
+# dummy
+
+# .deps/remote-stub.Po
+remote-stub.o: remote-stub.c makeint.h \
+ config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h
+
+# .deps/rule.Po
+rule.o: rule.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/signame.Po
+signame.o: signame.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/strcache.Po
+strcache.o: strcache.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/variable.Po
+variable.o: variable.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/version.Po
+version.o: version.c config.h
+
+# .deps/vmsjobs.Po
+# dummy
+
+# .deps/vpath.Po
+vpath.o: vpath.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..204ab32
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,204 @@
+# This is a -*-Makefile-*-, or close enough
+#
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AUTOMAKE_OPTIONS = 1.8 dist-bzip2 check-news
+ACLOCAL_AMFLAGS	=  -I config
+
+MAKE_HOST =	@MAKE_HOST@
+
+# Only process if target is MS-Windows
+if WINDOWSENV
+  MAYBE_W32 =	w32
+  W32INC =	-I $(top_srcdir)/w32/include
+  W32LIB =	-Lw32 -lw32
+endif
+
+SUBDIRS =	glob config po doc $(MAYBE_W32)
+
+bin_PROGRAMS =	make
+include_HEADERS = gnumake.h
+
+if USE_CUSTOMS
+  remote =	remote-cstms.c
+else
+  remote =	remote-stub.c
+endif
+
+make_SOURCES =	ar.c arscan.c commands.c default.c dir.c expand.c file.c \
+		function.c getopt.c getopt1.c guile.c implicit.c job.c load.c \
+		loadapi.c main.c misc.c output.c read.c remake.c rule.c \
+		signame.c strcache.c variable.c version.c vpath.c hash.c \
+		$(remote)
+
+EXTRA_make_SOURCES = vmsjobs.c remote-stub.c remote-cstms.c
+
+noinst_HEADERS = commands.h dep.h filedef.h job.h makeint.h rule.h variable.h \
+		debug.h getopt.h gettext.h hash.h output.h
+
+make_LDADD =	@LIBOBJS@ @ALLOCA@ $(GLOBLIB) @GETLOADAVG_LIBS@ @LIBINTL@ \
+		$(GUILE_LIBS)
+# Only process if target is MS-Windows
+if WINDOWSENV
+    make_LDADD += $(W32LIB)
+endif
+
+man_MANS =	make.1
+
+DEFS =		-DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@
+
+AM_CPPFLAGS =	$(GLOBINC)
+AM_CFLAGS =	$(GUILE_CFLAGS)
+# Only process if target is MS-Windows
+if WINDOWSENV
+    AM_CPPFLAGS +=	$(W32INC)
+endif
+
+
+# Extra stuff to include in the distribution.
+
+EXTRA_DIST =	README build.sh.in $(man_MANS) \
+		README.customs README.OS2 \
+		SCOPTIONS SMakefile \
+		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h \
+		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
+		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat \
+		make_msvc_net2003.sln make_msvc_net2003.vcproj \
+		README.VMS makefile.vms makefile.com config.h-vms \
+		vmsdir.h vmsfunctions.c vmsify.c \
+		gmk-default.scm gmk-default.h
+
+# This is built during configure, but behind configure's back
+
+DISTCLEANFILES = build.sh
+
+# --------------- Internationalization Section
+
+localedir =	$(datadir)/locale
+
+# --------------- Local INSTALL Section
+
+# If necessary, change the gid of the app and turn on the setgid flag.
+#
+
+# Whether or not make needs to be installed setgid.
+# The value should be either 'true' or 'false'.
+# On many systems, the getloadavg function (used to implement the '-l'
+# switch) will not work unless make is installed setgid kmem.
+#
+inst_setgid = @NEED_SETGID@
+
+# Install make setgid to this group so it can get the load average.
+#
+inst_group = @KMEM_GROUP@
+
+install-exec-local:
+	@if $(inst_setgid); then \
+	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
+	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
+	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
+	   else \
+	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
+	     echo "otherwise the '-l' option will probably not work."; \
+	     echo "You may need special privileges to complete the installation"; \
+	     echo "of $$app."; \
+	   fi; \
+	 else true; fi
+
+# --------------- Generate the Guile default module content
+
+guile.$(OBJEXT): gmk-default.h
+gmk-default.h: $(srcdir)/gmk-default.scm
+	(echo 'static const char *const GUILE_module_defn = " '\\ \
+	  && sed -e 's/;.*//' -e '/^[ \t]*$$/d' -e 's/"/\\"/g' -e 's/$$/ \\/' \
+	         $(srcdir)/gmk-default.scm \
+          && echo '";') > $@
+
+# --------------- Local DIST Section
+
+# Install the w32 and tests subdirectories
+#
+dist-hook:
+	(cd $(srcdir); \
+	 sub=`find w32 tests -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \
+	 tar chf - $$sub) \
+	| (cd $(distdir); tar xfBp -)
+
+
+# --------------- Local CHECK Section
+
+check-local: check-regression check-loadavg
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-regression
+
+check-loadavg: loadavg$(EXEEXT)
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code thinks:
+	-./loadavg$(EXEEXT)
+
+# The loadavg function is invoked during "make check" to test getloadavg.
+check_PROGRAMS = loadavg
+nodist_loadavg_SOURCES = getloadavg.c
+loadavg_CPPFLAGS = -DTEST
+loadavg_LDADD = @GETLOADAVG_LIBS@
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found and we can find perl.
+# If we're building outside the tree, we use symlinks to make a local copy of
+# the test suite.  Unfortunately the test suite itself isn't localizable yet.
+#
+MAKETESTFLAGS =
+
+check-regression: tests/config-flags.pm
+	@if test -f '$(srcdir)/tests/run_make_tests'; then \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 rm -f srctests; \
+		 if ln -s '$(srcdir)/tests' srctests; then \
+		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
+		   done; fi ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	 else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	 fi
+
+
+# --------------- Maintainer's Section
+
+# Tell automake that I haven't forgotten about this file and it will be
+# created before we build a distribution (see maintMakefile in the Git
+# distribution).
+
+README:
+
+@MAINT_MAKEFILE@
diff --git a/Makefile.ami b/Makefile.ami
new file mode 100644
index 0000000..7c561a3
--- /dev/null
+++ b/Makefile.ami
@@ -0,0 +1,308 @@
+# -*-Makefile-*- for GNU make on Amiga
+#
+# NOTE: If you have no 'make' program at all to process this makefile, run
+# 'build.sh' instead.
+#
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+#	Makefile for GNU Make
+#
+
+CC = sc
+RM = delete
+
+CFLAGS =
+CPPFLAGS =
+LDFLAGS =
+
+# Define these for your system as follows:
+#	-DNO_ARCHIVES		To disable 'ar' archive support.
+#	-DNO_FLOAT		To avoid using floating-point numbers.
+#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
+#				Some compilers apparently accept this
+#				without complaint but produce losing code,
+#				so beware.
+# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
+# See also 'config.h'.
+defines =
+
+# Which flavor of remote job execution support to use.
+# The code is found in 'remote-$(REMOTE).c'.
+REMOTE = stub
+
+# If you are using the GNU C library, or have the GNU getopt functions in
+# your C library, you can comment these out.
+GETOPT = getopt.o getopt1.o
+GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
+
+# If you are using the GNU C library, or have the GNU glob functions in
+# your C library, you can comment this out.  GNU make uses special hooks
+# into the glob functions to be more efficient (by using make's directory
+# cache for globbing), so you must use the GNU functions even if your
+# system's C library has the 1003.2 glob functions already.  Also, the glob
+# functions in the AIX and HPUX C libraries are said to be buggy.
+GLOB = glob/glob.lib
+
+# If your system doesn't have alloca, or the one provided is bad, define this.
+ALLOCA = alloca.o
+ALLOCA_SRC = $(srcdir)alloca.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
+# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
+# alloca.c instead on those machines.
+LOADLIBES =
+
+# Any extra object files your system needs.
+extras = amiga.o
+
+# Common prefix for machine-independent installed files.
+prefix =
+# Common prefix for machine-dependent installed files.
+exec_prefix =
+
+# Directory to install 'make' in.
+bindir = sc:c
+# Directory to find libraries in for '-lXXX'.
+libdir = lib:
+# Directory to search by default for included makefiles.
+includedir = include:
+# Directory to install the Info files in.
+infodir = doc:
+# Directory to install the man page in.
+mandir = t:
+# Number to put on the man page filename.
+manext = 1
+# Prefix to put on installed 'make' binary file name.
+binprefix =
+# Prefix to put on installed 'make' man page file name.
+manprefix = $(binprefix)
+
+# Whether or not make needs to be installed setgid.
+# The value should be either 'true' or 'false'.
+# On many systems, the getloadavg function (used to implement the '-l'
+# switch) will not work unless make is installed setgid kmem.
+install_setgid = false
+# Install make setgid to this group so it can read /dev/kmem.
+group = sys
+
+# Program to install 'make'.
+INSTALL_PROGRAM = copy
+# Program to install the man page.
+INSTALL_DATA = copy
+# Generic install program.
+INSTALL = copy
+
+# Program to format Texinfo source into Info files.
+MAKEINFO = makeinfo
+# Program to format Texinfo source into DVI files.
+TEXI2DVI = texi2dvi
+
+# Programs to make tags files.
+ETAGS = etags -w
+CTAGS = ctags -w
+
+#guile = guile.o
+
+objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o   \
+       rule.o implicit.o default.o variable.o expand.o function.o    \
+       vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o   \
+       remote-$(REMOTE).o $(GETOPT) $(ALLOCA) $(extras) $(guile)
+
+srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
+       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
+       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
+       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
+       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
+       $(srcdir)vpath.c $(srcdir)version.c $(srcdir)hash.c           \
+       $(srcdir)guile.c $(srcdir)remote-$(REMOTE).c                  \
+       $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c           \
+       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)           \
+       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)filedep.h         \
+       $(srcdir)job.h $(srcdir)makeint.h $(srcdir)rule.h             \
+       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
+
+
+.SUFFIXES:
+.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
+
+all: make
+info: make.info
+dvi: make.dvi
+# Some makes apparently use .PHONY as the default goal if it is before 'all'.
+.PHONY: all check info dvi
+
+make.info: make.texinfo
+	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
+
+make.dvi: make.texinfo
+	$(TEXI2DVI) $(srcdir)make.texinfo
+
+make.ps: make.dvi
+	dvi2ps make.dvi > make.ps
+
+make: $(objs) $(GLOB)
+	$(CC) Link $(LDFLAGS) $(objs) Lib $(GLOB) $(LOADLIBES) To make.new
+	-delete make
+	rename make.new make
+
+TMPFILE = t:Make$$
+
+$(GLOB):
+	cd glob @@\
+	$(MAKE) -$(MAKEFLAGS) -f Makefile
+
+# -I. is needed to find config.h in the build directory.
+OUTPUT_OPTION =
+.c.o:
+	$(CC) $(defines) IDir "" IDir glob \
+	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+# For some losing Unix makes.
+SHELL = /bin/sh
+#@SET_MAKE@
+
+glob/libglob.a: FORCE config.h
+	cd glob; $(MAKE) libglob.a
+FORCE:
+
+.PHONY: install installdirs
+install: installdirs \
+	 $(bindir)$(binprefix)make $(infodir)make.info \
+	 $(mandir)$(manprefix)make.$(manext)
+
+installdirs:
+	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
+
+$(bindir)$(binprefix)make: make
+	$(INSTALL_PROGRAM) make $@.new
+	@if $(install_setgid); then \
+	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
+	     echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
+	   else \
+	     echo "$@ needs to be owned by group $(group) and setgid;"; \
+	     echo "otherwise the '-l' option will probably not work."; \
+	     echo "You may need special privileges to install $@."; \
+	   fi; \
+	 else true; fi
+# Some systems can't deal with renaming onto a running binary.
+	-$(RM) $@.old
+	-mv $@ $@.old
+	mv $@.new $@
+
+$(infodir)make.info: make.info
+	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
+	for file in $${dir}/make.info*; do \
+	  name="`basename $$file`"; \
+	  $(INSTALL_DATA) $$file \
+	    `echo $@ | sed "s,make.info\$$,$$name,"`; \
+	done
+# Run install-info only if it exists.
+# Use 'if' instead of just prepending '-' to the
+# line so we notice real errors from install-info.
+# We use '$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
+	  if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
+	  install-info --infodir=$(infodir) $$dir/make.info; \
+	else true; fi
+
+$(mandir)$(manprefix)make.$(manext): make.man
+	$(INSTALL_DATA) $(srcdir)make.man $@
+
+
+loadavg: loadavg.c config.h
+	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
+	      loadavg.c $(LOADLIBES) -o $@
+# We copy getloadavg.c into a different file rather than compiling it
+# directly because some compilers clobber getloadavg.o in the process.
+loadavg.c: getloadavg.c
+	ln $(srcdir)getloadavg.c loadavg.c || \
+	cp $(srcdir)getloadavg.c loadavg.c
+check-loadavg: loadavg
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code believes:
+	./loadavg
+check: check-loadavg
+
+
+.PHONY: clean realclean distclean mostlyclean
+clean: glob-clean
+	-$(RM) make loadavg "#?.o" core make.dvi
+
+distclean: clean glob-realclean
+	-$(RM) Makefile config.h config.status build.sh
+	-$(RM) config.log config.cache
+	-$(RM) TAGS tags
+	-$(RM) make.?? make.??s make.log make.toc make.*aux
+	-$(RM) loadavg.c
+
+realclean: distclean
+	-$(RM) make.info*
+mostlyclean: clean
+
+.PHONY: glob-clean glob-realclean
+glob-clean glob-realclean:
+	cd glob @@\
+	$(MAKE) $@
+
+# This tells versions [3.59,3.63) of GNU make not to export all variables.
+.NOEXPORT:
+
+# The automatically generated dependencies below may omit config.h
+# because it is included with '#include <config.h>' rather than
+# '#include "config.h"'.  So we add the explicit dependency to make sure.
+$(objs): config.h
+
+# Automatically generated dependencies will be put at the end of the file.
+
+# Automatically generated dependencies.
+commands.o: commands.c makeint.h dep.h filedef.h variable.h job.h \
+ commands.h
+job.o: job.c makeint.h job.h filedef.h commands.h variable.h
+dir.o: dir.c makeint.h
+file.o: file.c makeint.h dep.h filedef.h job.h commands.h variable.h
+misc.o: misc.c makeint.h dep.h
+main.o: main.c makeint.h dep.h filedef.h variable.h job.h commands.h \
+ getopt.h
+guile.o: guile.c makeint.h dep.h debug.h variable.h gmk-default.h
+read.o: read.c makeint.h dep.h filedef.h job.h commands.h variable.h \
+ glob/glob.h
+remake.o: remake.c makeint.h filedef.h job.h commands.h dep.h
+rule.o: rule.c makeint.h dep.h filedef.h job.h commands.h variable.h \
+ rule.h
+implicit.o: implicit.c makeint.h rule.h dep.h filedef.h
+default.o: default.c makeint.h rule.h dep.h filedef.h job.h commands.h \
+ variable.h
+variable.o: variable.c makeint.h dep.h filedef.h job.h commands.h \
+ variable.h
+expand.o: expand.c makeint.h filedef.h job.h commands.h variable.h
+function.o: function.c makeint.h filedef.h variable.h dep.h job.h \
+ commands.h amiga.h
+vpath.o: vpath.c makeint.h filedef.h variable.h
+strcache.o: strcache.c makeint.h hash.h
+version.o: version.c
+ar.o: ar.c makeint.h filedef.h dep.h
+arscan.o: arscan.c makeint.h
+signame.o: signame.c signame.h
+remote-stub.o: remote-stub.c makeint.h filedef.h job.h commands.h
+getopt.o: getopt.c
+getopt1.o : getopt1.c getopt.h
+getloadavg.o: getloadavg.c
+amiga.o: amiga.c makeint.h variable.h amiga.h
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..e2310fe
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1280 @@
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# This is a -*-Makefile-*-, or close enough
+#
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = make$(EXEEXT)
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@am__append_1 = $(W32LIB)
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@am__append_2 = $(W32INC)
+check_PROGRAMS = loadavg$(EXEEXT)
+subdir = .
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in $(top_srcdir)/tests/config-flags.pm.in \
+	getloadavg.c alloca.c $(top_srcdir)/config/depcomp \
+	$(include_HEADERS) $(noinst_HEADERS) ABOUT-NLS AUTHORS COPYING \
+	INSTALL NEWS README $(top_srcdir)/config/ar-lib \
+	$(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
+	$(top_srcdir)/config/config.rpath \
+	$(top_srcdir)/config/config.sub \
+	$(top_srcdir)/config/install-sh $(top_srcdir)/config/missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = tests/config-flags.pm
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
+	"$(DESTDIR)$(includedir)"
+PROGRAMS = $(bin_PROGRAMS)
+nodist_loadavg_OBJECTS = loadavg-getloadavg.$(OBJEXT)
+loadavg_OBJECTS = $(nodist_loadavg_OBJECTS)
+loadavg_DEPENDENCIES =
+am__make_SOURCES_DIST = ar.c arscan.c commands.c default.c dir.c \
+	expand.c file.c function.c getopt.c getopt1.c guile.c \
+	implicit.c job.c load.c loadapi.c main.c misc.c output.c \
+	read.c remake.c rule.c signame.c strcache.c variable.c \
+	version.c vpath.c hash.c remote-stub.c remote-cstms.c
+@USE_CUSTOMS_FALSE@am__objects_1 = remote-stub.$(OBJEXT)
+@USE_CUSTOMS_TRUE@am__objects_1 = remote-cstms.$(OBJEXT)
+am_make_OBJECTS = ar.$(OBJEXT) arscan.$(OBJEXT) commands.$(OBJEXT) \
+	default.$(OBJEXT) dir.$(OBJEXT) expand.$(OBJEXT) \
+	file.$(OBJEXT) function.$(OBJEXT) getopt.$(OBJEXT) \
+	getopt1.$(OBJEXT) guile.$(OBJEXT) implicit.$(OBJEXT) \
+	job.$(OBJEXT) load.$(OBJEXT) loadapi.$(OBJEXT) main.$(OBJEXT) \
+	misc.$(OBJEXT) output.$(OBJEXT) read.$(OBJEXT) \
+	remake.$(OBJEXT) rule.$(OBJEXT) signame.$(OBJEXT) \
+	strcache.$(OBJEXT) variable.$(OBJEXT) version.$(OBJEXT) \
+	vpath.$(OBJEXT) hash.$(OBJEXT) $(am__objects_1)
+make_OBJECTS = $(am_make_OBJECTS)
+am__DEPENDENCIES_1 =
+@WINDOWSENV_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
+make_DEPENDENCIES = @LIBOBJS@ @ALLOCA@ $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(nodist_loadavg_SOURCES) $(make_SOURCES) \
+	$(EXTRA_make_SOURCES)
+DIST_SOURCES = $(am__make_SOURCES_DIST) $(EXTRA_make_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = glob config po doc w32
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = -DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+
+# --------------- Internationalization Section
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.8 dist-bzip2 check-news
+ACLOCAL_AMFLAGS = -I config
+
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@MAYBE_W32 = w32
+@WINDOWSENV_TRUE@W32INC = -I $(top_srcdir)/w32/include
+@WINDOWSENV_TRUE@W32LIB = -Lw32 -lw32
+SUBDIRS = glob config po doc $(MAYBE_W32)
+include_HEADERS = gnumake.h
+@USE_CUSTOMS_FALSE@remote = remote-stub.c
+@USE_CUSTOMS_TRUE@remote = remote-cstms.c
+make_SOURCES = ar.c arscan.c commands.c default.c dir.c expand.c file.c \
+		function.c getopt.c getopt1.c guile.c implicit.c job.c load.c \
+		loadapi.c main.c misc.c output.c read.c remake.c rule.c \
+		signame.c strcache.c variable.c version.c vpath.c hash.c \
+		$(remote)
+
+EXTRA_make_SOURCES = vmsjobs.c remote-stub.c remote-cstms.c
+noinst_HEADERS = commands.h dep.h filedef.h job.h makeint.h rule.h variable.h \
+		debug.h getopt.h gettext.h hash.h output.h
+
+make_LDADD = @LIBOBJS@ @ALLOCA@ $(GLOBLIB) @GETLOADAVG_LIBS@ @LIBINTL@ \
+	$(GUILE_LIBS) $(am__append_1)
+man_MANS = make.1
+AM_CPPFLAGS = $(GLOBINC) $(am__append_2)
+AM_CFLAGS = $(GUILE_CFLAGS)
+
+# Extra stuff to include in the distribution.
+EXTRA_DIST = README build.sh.in $(man_MANS) \
+		README.customs README.OS2 \
+		SCOPTIONS SMakefile \
+		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h \
+		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
+		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat \
+		make_msvc_net2003.sln make_msvc_net2003.vcproj \
+		README.VMS makefile.vms makefile.com config.h-vms \
+		vmsdir.h vmsfunctions.c vmsify.c \
+		gmk-default.scm gmk-default.h
+
+
+# This is built during configure, but behind configure's back
+DISTCLEANFILES = build.sh
+
+# --------------- Local INSTALL Section
+
+# If necessary, change the gid of the app and turn on the setgid flag.
+#
+
+# Whether or not make needs to be installed setgid.
+# The value should be either 'true' or 'false'.
+# On many systems, the getloadavg function (used to implement the '-l'
+# switch) will not work unless make is installed setgid kmem.
+#
+inst_setgid = @NEED_SETGID@
+
+# Install make setgid to this group so it can get the load average.
+#
+inst_group = @KMEM_GROUP@
+nodist_loadavg_SOURCES = getloadavg.c
+loadavg_CPPFLAGS = -DTEST
+loadavg_LDADD = @GETLOADAVG_LIBS@
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found and we can find perl.
+# If we're building outside the tree, we use symlinks to make a local copy of
+# the test suite.  Unfortunately the test suite itself isn't localizable yet.
+#
+MAKETESTFLAGS = 
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+tests/config-flags.pm: $(top_builddir)/config.status $(top_srcdir)/tests/config-flags.pm.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+clean-checkPROGRAMS:
+	-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
+
+loadavg$(EXEEXT): $(loadavg_OBJECTS) $(loadavg_DEPENDENCIES) $(EXTRA_loadavg_DEPENDENCIES) 
+	@rm -f loadavg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(loadavg_OBJECTS) $(loadavg_LDADD) $(LIBS)
+
+make$(EXEEXT): $(make_OBJECTS) $(make_DEPENDENCIES) $(EXTRA_make_DEPENDENCIES) 
+	@rm -f make$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(make_OBJECTS) $(make_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/alloca.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getloadavg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arscan.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/commands.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/default.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dir.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expand.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/function.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/guile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/implicit.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/job.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/load.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadapi.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadavg-getloadavg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remake.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-cstms.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-stub.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rule.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signame.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strcache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/variable.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vmsjobs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vpath.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+loadavg-getloadavg.o: getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.o -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c
+
+loadavg-getloadavg.obj: getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.obj -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi`
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	@case `sed 15q $(srcdir)/NEWS` in \
+	*"$(VERSION)"*) : ;; \
+	*) \
+	  echo "NEWS not updated; not releasing" 1>&2; \
+	  exit 1;; \
+	esac
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS install-man
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-exec-local
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am check-local clean clean-binPROGRAMS \
+	clean-checkPROGRAMS clean-cscope clean-generic cscope \
+	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-hdr distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-exec-local install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-man install-man1 install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-includeHEADERS uninstall-man uninstall-man1
+
+
+install-exec-local:
+	@if $(inst_setgid); then \
+	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
+	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
+	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
+	   else \
+	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
+	     echo "otherwise the '-l' option will probably not work."; \
+	     echo "You may need special privileges to complete the installation"; \
+	     echo "of $$app."; \
+	   fi; \
+	 else true; fi
+
+# --------------- Generate the Guile default module content
+
+guile.$(OBJEXT): gmk-default.h
+gmk-default.h: $(srcdir)/gmk-default.scm
+	(echo 'static const char *const GUILE_module_defn = " '\\ \
+	  && sed -e 's/;.*//' -e '/^[ \t]*$$/d' -e 's/"/\\"/g' -e 's/$$/ \\/' \
+	         $(srcdir)/gmk-default.scm \
+          && echo '";') > $@
+
+# --------------- Local DIST Section
+
+# Install the w32 and tests subdirectories
+#
+dist-hook:
+	(cd $(srcdir); \
+	 sub=`find w32 tests -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \
+	 tar chf - $$sub) \
+	| (cd $(distdir); tar xfBp -)
+
+# --------------- Local CHECK Section
+
+check-local: check-regression check-loadavg
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-regression
+
+check-loadavg: loadavg$(EXEEXT)
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code thinks:
+	-./loadavg$(EXEEXT)
+
+check-regression: tests/config-flags.pm
+	@if test -f '$(srcdir)/tests/run_make_tests'; then \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 rm -f srctests; \
+		 if ln -s '$(srcdir)/tests' srctests; then \
+		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
+		   done; fi ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	 else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	 fi
+
+# --------------- Maintainer's Section
+
+# Tell automake that I haven't forgotten about this file and it will be
+# created before we build a distribution (see maintMakefile in the Git
+# distribution).
+
+README:
+
+@MAINT_MAKEFILE@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..7e11787
--- /dev/null
+++ b/NEWS
@@ -0,0 +1,1235 @@
+GNU make NEWS                                               -*-indented-text-*-
+  History of user-visible changes.
+  05 Oct 2014
+
+See the end of this file for copyrights and conditions.
+
+All changes mentioned here are more fully described in the GNU make
+manual, which is contained in this distribution as the file doc/make.texi.
+See the README file and the GNU make manual for instructions for
+reporting bugs.
+
+Version 4.1 (05 Oct 2014)
+
+A complete list of bugs fixed in this version is available here:
+
+http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=105&set=custom
+
+* New variables: $(MAKE_TERMOUT) and $(MAKE_TERMERR) are set to non-empty
+  values if stdout or stderr, respectively, are believed to be writing to a
+  terminal.  These variables are exported by default.
+
+* Allow a no-text-argument form of the $(file ...) function.  Without a text
+  argument nothing is written to the file: it is simply opened in the
+  requested mode, then closed again.
+
+* Change the fatal error for mixed explicit and implicit rules, that was
+  introduced in GNU make 3.82, to a non-fatal error.  However, this syntax is
+  still deprecated and may return to being illegal in a future version of GNU
+  make.  Makefiles that rely on this syntax should be fixed.
+  See https://savannah.gnu.org/bugs/?33034
+
+
+Version 4.0 (09 Oct 2013)
+
+A complete list of bugs fixed in this version is available here:
+
+http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set=custom
+
+* WARNING: Backward-incompatibility!
+  If .POSIX is specified, then make adheres to the POSIX backslash/newline
+  handling requirements, which introduces the following changes to the
+  standard backslash/newline handling in non-recipe lines:
+  * Any trailing space before the backslash is preserved
+  * Each backslash/newline (plus subsequent whitespace) is converted to a
+    single space
+
+* New feature: GNU Guile integration
+  This version of GNU make can be compiled with GNU Guile integration.
+  GNU Guile serves as an embedded extension language for make.
+  See the "Guile Function" section in the GNU Make manual for details.
+  Currently GNU Guile 1.8 and 2.0+ are supported.  In Guile 1.8 there is no
+  support for internationalized character sets.  In Guile 2.0+, scripts can be
+  encoded in UTF-8.
+
+* New command line option: --output-sync (-O) enables grouping of output by
+  target or by recursive make.  This is useful during parallel builds to avoid
+  mixing output from different jobs together giving hard-to-understand
+  results.  Original implementation by David Boyce <dsb@boyski.com>.
+  Reworked and enhanced by Frank Heckenbach <f.heckenbach@fh-soft.de>.
+  Windows support by Eli Zaretskii <eliz@gnu.org>.
+
+* New command line option: --trace enables tracing of targets.  When enabled
+  the recipe to be invoked is printed even if it would otherwise be suppressed
+  by .SILENT or a "@" prefix character.  Also before each recipe is run the
+  makefile name and linenumber where it was defined are shown as well as the
+  prerequisites that caused the target to be considered out of date.
+
+* New command line option argument: --debug now accepts a "n" (none) flag
+  which disables all debugging settings that are currently enabled.
+
+* New feature: The "job server" capability is now supported on Windows.
+  Implementation contributed by Troy Runkel <Troy.Runkel@mathworks.com>
+
+* New feature: The .ONESHELL capability is now supported on Windows.  Support
+  added by Eli Zaretskii <eliz@gnu.org>.
+
+* New feature: "!=" shell assignment operator as an alternative to the
+  $(shell ...) function.  Implemented for compatibility with BSD makefiles.
+  Note there are subtle differences between "!=" and $(shell ...).  See the
+  description in the GNU make manual.
+  WARNING: Backward-incompatibility!
+  Variables ending in "!" previously defined as "variable!= value" will now be
+  interpreted as shell assignment.  Change your assignment to add whitespace
+  between the "!" and "=": "variable! = value"
+
+* New feature: "::=" simple assignment operator as defined by POSIX in 2012.
+  This operator has identical functionality to ":=" in GNU make, but will be
+  portable to any implementation of make conforming to a sufficiently new
+  version of POSIX (see http://austingroupbugs.net/view.php?id=330).  It is
+  not necessary to define the .POSIX target to access this operator.
+
+* New feature: Loadable objects
+  This version of GNU make contains a "technology preview": the ability to
+  load dynamic objects into the make runtime.  These objects can be created by
+  the user and can add extended functionality, usable by makefiles.
+
+* New function: $(file ...) writes to a file.
+
+* New variable: $(GNUMAKEFLAGS) will be parsed for make flags, just like
+  MAKEFLAGS is.  It can be set in the environment or the makefile, containing
+  GNU make-specific flags to allow your makefile to be portable to other
+  versions of make.  Once this variable is parsed, GNU make will set it to the
+  empty string so that flags will not be duplicated on recursion.
+
+* New variable: `MAKE_HOST' gives the name of the host architecture
+  make was compiled for.  This is the same value you see after 'Built for'
+  when running 'make --version'.
+
+* Behavior of MAKEFLAGS and MFLAGS is more rigorously defined.  All simple
+  flags are grouped together in the first word of MAKEFLAGS.  No options that
+  accept arguments appear in the first word.  If no simple flags are present
+  MAKEFLAGS begins with a space.  Flags with both short and long versions
+  always use the short versions in MAKEFLAGS.  Flags are listed in
+  alphabetical order using ASCII ordering.  MFLAGS never begins with "- ".
+
+* Setting the -r and -R options in MAKEFLAGS inside a makefile now works as
+  expected, removing all built-in rules and variables, respectively.
+
+* If a recipe fails, the makefile name and linenumber of the recipe are shown.
+
+* A .RECIPEPREFIX setting is remembered per-recipe and variables expanded
+  in that recipe also use that recipe prefix setting.
+
+* In -p output, .RECIPEPREFIX settings are shown and all target-specific
+  variables are output as if in a makefile, instead of as comments.
+
+* On MS-Windows, recipes that use ".." quoting will no longer force
+  invocation of commands via temporary batch files and stock Windows
+  shells, they will be short-circuited and invoked directly.  (In
+  other words, " is no longer a special character for stock Windows
+  shells.)  This avoids hitting shell limits for command length when
+  quotes are used, but nothing else in the command requires the shell.
+  This change could potentially mean some minor incompatibilities in
+  behavior when the recipe uses quoted string on shell command lines.
+
+
+Version 3.82 (28 Jul 2010)
+
+A complete list of bugs fixed in this version is available here:
+
+http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=104&set=custom
+
+* Compiling GNU make now requires a conforming ISO C 1989 compiler and
+  standard runtime library.
+
+* WARNING: Backward-incompatibility!
+  The POSIX standard for make was changed in the 2008 version in a
+  fundamentally incompatible way: make is required to invoke the shell as if
+  the '-e' flag were provided.  Because this would break many makefiles that
+  have been written to conform to the original text of the standard, the
+  default behavior of GNU make remains to invoke the shell with simply '-c'.
+  However, any makefile specifying the .POSIX special target will follow the
+  new POSIX standard and pass '-e' to the shell.  See also .SHELLFLAGS
+  below.
+
+* WARNING: Backward-incompatibility!
+  The '$?' variable now contains all prerequisites that caused the target to
+  be considered out of date, even if they do not exist (previously only
+  existing targets were provided in $?).
+
+* WARNING: Backward-incompatibility!
+  Wildcards were not documented as returning sorted values, but the results
+  have been sorted up until this release..  If your makefiles require sorted
+  results from wildcard expansions, use the $(sort ...)  function to request
+  it explicitly.
+
+* WARNING: Backward-incompatibility!
+  As a result of parser enhancements, three backward-compatibility issues
+  exist: first, a prerequisite containing an "=" cannot be escaped with a
+  backslash any longer.  You must create a variable containing an "=" and
+  use that variable in the prerequisite.  Second, variable names can no
+  longer contain whitespace, unless you put the whitespace in a variable and
+  use the variable.  Third, in previous versions of make it was sometimes
+  not flagged as an error for explicit and pattern targets to appear in the
+  same rule.  Now this is always reported as an error.
+
+* WARNING: Backward-incompatibility!
+  The pattern-specific variables and pattern rules are now applied in the
+  shortest stem first order instead of the definition order (variables
+  and rules with the same stem length are still applied in the definition
+  order). This produces the usually-desired behavior where more specific
+  patterns are preferred. To detect this feature search for 'shortest-stem'
+  in the .FEATURES special variable.
+
+* WARNING: Backward-incompatibility!
+  The library search behavior has changed to be compatible with the standard
+  linker behavior. Prior to this version for prerequisites specified using
+  the -lfoo syntax make first searched for libfoo.so in the current
+  directory, vpath directories, and system directories. If that didn't yield
+  a match, make then searched for libfoo.a in these directories. Starting
+  with this version make searches first for libfoo.so and then for libfoo.a
+  in each of these directories in order.
+
+* New command line option: --eval=STRING causes STRING to be evaluated as
+  makefile syntax (akin to using the $(eval ...) function).  The evaluation
+  is performed after all default rules and variables are defined, but before
+  any makefiles are read.
+
+* New special variable: .RECIPEPREFIX allows you to reset the recipe
+  introduction character from the default (TAB) to something else.  The
+  first character of this variable value is the new recipe introduction
+  character.  If the variable is set to the empty string, TAB is used again.
+  It can be set and reset at will; recipes will use the value active when
+  they were first parsed.  To detect this feature check the value of
+  $(.RECIPEPREFIX).
+
+* New special variable: .SHELLFLAGS allows you to change the options passed
+  to the shell when it invokes recipes.  By default the value will be "-c"
+  (or "-ec" if .POSIX is set).
+
+* New special target: .ONESHELL instructs make to invoke a single instance
+  of the shell and provide it with the entire recipe, regardless of how many
+  lines it contains.  As a special feature to allow more straightforward
+  conversion of makefiles to use .ONESHELL, any recipe line control
+  characters ('@', '+', or '-') will be removed from the second and
+  subsequent recipe lines.  This happens _only_ if the SHELL value is deemed
+  to be a standard POSIX-style shell.  If not, then no interior line control
+  characters are removed (as they may be part of the scripting language used
+  with the alternate SHELL).
+
+* New variable modifier 'private': prefixing a variable assignment with the
+  modifier 'private' suppresses inheritance of that variable by
+  prerequisites.  This is most useful for target- and pattern-specific
+  variables.
+
+* New make directive: 'undefine' allows you to undefine a variable so that
+  it appears as if it was never set. Both $(flavor) and $(origin) functions
+  will return 'undefined' for such a variable. To detect this feature search
+  for 'undefine' in the .FEATURES special variable.
+
+* The parser for variable assignments has been enhanced to allow multiple
+  modifiers ('export', 'override', 'private') on the same line as variables,
+  including define/endef variables, and in any order.  Also, it is possible
+  to create variables and targets named as these modifiers.
+
+* The 'define' make directive now allows a variable assignment operator
+  after the variable name, to allow for simple, conditional, or appending
+  multi-line variable assignment.
+
+
+Version 3.81 (01 Apr 2006)
+
+* GNU make is ported to OS/2.
+
+* GNU make is ported to MinGW.  The MinGW build is only supported by
+  the build_w32.bat batch file; see the file README.W32 for more
+  details.
+
+* WARNING: Future backward-incompatibility!
+  Up to and including this release, the '$?' variable does not contain
+  any prerequisite that does not exist, even though that prerequisite
+  might have caused the target to rebuild.  Starting with the _next_
+  release of GNU make, '$?' will contain all prerequisites that caused
+  the target to be considered out of date.
+  See http://savannah.gnu.org/bugs/?16051
+
+* WARNING: Backward-incompatibility!
+  GNU make now implements a generic "second expansion" feature on the
+  prerequisites of both explicit and implicit (pattern) rules.  In order
+  to enable this feature, the special target '.SECONDEXPANSION' must be
+  defined before the first target which takes advantage of it.  If this
+  feature is enabled then after all rules have been parsed the
+  prerequisites are expanded again, this time with all the automatic
+  variables in scope.  This means that in addition to using standard
+  SysV $$@ in prerequisites lists, you can also use complex functions
+  such as $$(notdir $$@) etc.  This behavior applies to implicit rules,
+  as well, where the second expansion occurs when the rule is matched.
+  However, this means that when '.SECONDEXPANSION' is enabled you must
+  double-quote any "$" in your filenames; instead of "foo: boo$$bar" you
+  now must write "foo: foo$$$$bar".  Note that the SysV $$@ etc. feature,
+  which used to be available by default, is now ONLY available when the
+  .SECONDEXPANSION target is defined.  If your makefiles take advantage
+  of this SysV feature you will need to update them.
+
+* WARNING: Backward-incompatibility!
+  In order to comply with POSIX, the way in which GNU make processes
+  backslash-newline sequences in recipes has changed.  If your makefiles
+  use backslash-newline sequences inside of single-quoted strings in
+  recipes you will be impacted by this change.  See the GNU make manual
+  subsection "Splitting Recipe Lines" (node "Splitting Lines"), in
+  section "Recipe Syntax", chapter "Writing Recipe in Rules", for
+  details.
+
+* WARNING: Backward-incompatibility!
+  Some previous versions of GNU make had a bug where "#" in a function
+  invocation such as $(shell ...) was treated as a make comment.  A
+  workaround was to escape these with backslashes.  This bug has been
+  fixed: if your makefile uses "\#" in a function invocation the
+  backslash is now preserved, so you'll need to remove it.
+
+* New command line option: -L (--check-symlink-times).  On systems that
+  support symbolic links, if this option is given then GNU make will
+  use the most recent modification time of any symbolic links that are
+  used to resolve target files.  The default behavior remains as it
+  always has: use the modification time of the actual target file only.
+
+* The "else" conditional line can now be followed by any other valid
+  conditional on the same line: this does not increase the depth of the
+  conditional nesting, so only one "endif" is required to close the
+  conditional.
+
+* All pattern-specific variables that match a given target are now used
+  (previously only the first match was used).
+
+* Target-specific variables can be marked as exportable using the
+  "export" keyword.
+
+* In a recursive $(call ...) context, any extra arguments from the outer
+  call are now masked in the context of the inner call.
+
+* Implemented a solution for the "thundering herd" problem with "-j -l".
+  This version of GNU make uses an algorithm suggested by Thomas Riedl
+  <thomas.riedl@siemens.com> to track the number of jobs started in the
+  last second and artificially adjust GNU make's view of the system's
+  load average accordingly.
+
+* New special variables available in this release:
+   - .INCLUDE_DIRS: Expands to a list of directories that make searches
+     for included makefiles.
+   - .FEATURES: Contains a list of special features available in this
+     version of GNU make.
+   - .DEFAULT_GOAL: Set the name of the default goal make will
+     use if no goals are provided on the command line.
+   - MAKE_RESTARTS: If set, then this is the number of times this
+     instance of make has been restarted (see "How Makefiles Are Remade"
+     in the manual).
+   - New automatic variable: $| (added in 3.80, actually): contains all
+     the order-only prerequisites defined for the target.
+
+* New functions available in this release:
+   - $(lastword ...) returns the last word in the list.  This gives
+     identical results as $(word $(words ...) ...), but is much faster.
+   - $(abspath ...) returns the absolute path (all "." and ".."
+     directories resolved, and any duplicate "/" characters removed) for
+     each path provided.
+   - $(realpath ...) returns the canonical pathname for each path
+     provided.  The canonical pathname is the absolute pathname, with
+     all symbolic links resolved as well.
+   - $(info ...) prints its arguments to stdout.  No makefile name or
+     line number info, etc. is printed.
+   - $(flavor ...) returns the flavor of a variable.
+   - $(or ...) provides a short-circuiting OR conditional: each argument
+     is expanded.  The first true (non-empty) argument is returned; no
+     further arguments are expanded.  Expands to empty if there are no
+     true arguments.
+   - $(and ...) provides a short-circuiting AND conditional: each
+     argument is expanded.  The first false (empty) argument is
+     returned; no further arguments are expanded.  Expands to the last
+     argument if all arguments are true.
+
+* Changes made for POSIX compatibility:
+   - Only touch targets (under -t) if they have a recipe.
+   - Setting the SHELL make variable does NOT change the value of the
+     SHELL environment variable given to programs invoked by make.  As
+     an enhancement to POSIX, if you export the make variable SHELL then
+     it will be set in the environment, just as before.
+
+* On MS Windows systems, explicitly setting SHELL to a pathname ending
+  in "cmd" or "cmd.exe" (case-insensitive) will force GNU make to use
+  the DOS command interpreter in batch mode even if a UNIX-like shell
+  could be found on the system.
+
+* On VMS there is now support for case-sensitive filesystems such as ODS5.
+  See the README.VMS file for information.
+
+* Parallel builds (-jN) no longer require a working Bourne shell on
+  Windows platforms.  They work even with the stock Windows shells, such
+  as cmd.exe and command.com.
+
+* Updated to autoconf 2.59, automake 1.9.5, and gettext 0.14.1.  Users
+  should not be impacted.
+
+* New translations for Swedish, Chinese (simplified), Ukrainian,
+  Belarusian, Finnish, Kinyarwandan, and Irish.  Many updated
+  translations.
+
+A complete list of bugs fixed in this version is available here:
+
+  http://savannah.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=103
+
+
+Version 3.80 (03 Oct 2002)
+
+* A new feature exists: order-only prerequisites.  These prerequisites
+  affect the order in which targets are built, but they do not impact
+  the rebuild/no-rebuild decision of their dependents.  That is to say,
+  they allow you to require target B be built before target A, without
+  requiring that target A will always be rebuilt if target B is updated.
+  Patch for this feature provided by Greg McGary <greg@mcgary.org>.
+
+* For compatibility with SysV make, GNU make now supports the peculiar
+  syntax $$@, $$(@D), and $$(@F) in the prerequisites list of a rule.
+  This syntax is only valid within explicit and static pattern rules: it
+  cannot be used in implicit (suffix or pattern) rules.  Edouard G. Parmelan
+  <egp@free.fr> provided a patch implementing this feature; however, I
+  decided to implement it in a different way.
+
+* The argument to the "ifdef" conditional is now expanded before it's
+  tested, so it can be a constructed variable name.
+
+  Similarly, the arguments to "export" (when not used in a variable
+  definition context) and "unexport" are also now expanded.
+
+* A new function is defined: $(value ...).  The argument to this
+  function is the _name_ of a variable.  The result of the function is
+  the value of the variable, without having been expanded.
+
+* A new function is defined: $(eval ...).  The arguments to this
+  function should expand to makefile commands, which will then be
+  evaluated as if they had appeared in the makefile.  In combination
+  with define/endef multiline variable definitions this is an extremely
+  powerful capability.  The $(value ...) function is also sometimes
+  useful here.
+
+* A new built-in variable is defined, $(MAKEFILE_LIST).  It contains a
+  list of each makefile GNU make has read, or started to read, in the
+  order in which they were encountered.  So, the last filename in the
+  list when a makefile is just being read (before any includes) is the
+  name of the current makefile.
+
+* A new built-in variable is defined: $(.VARIABLES).  When it is
+  expanded it returns a complete list of variable names defined by all
+  makefiles at that moment.
+
+* A new command line option is defined, -B or --always-make.  If
+  specified GNU make will consider all targets out-of-date even if they
+  would otherwise not be.
+
+* The arguments to $(call ...) functions were being stored in $1, $2,
+  etc. as recursive variables, even though they are fully expanded
+  before assignment.  This means that escaped dollar signs ($$ etc.)
+  were not behaving properly.  Now the arguments are stored as simple
+  variables.  This may mean that if you added extra escaping to your
+  $(call ...) function arguments you will need to undo it now.
+
+* The variable invoked by $(call ...) can now be recursive: unlike other
+  variables it can reference itself and this will not produce an error
+  when it is used as the first argument to $(call ...) (but only then).
+
+* New pseudo-target .LOW_RESOLUTION_TIME, superseding the configure
+  option --disable-nsec-timestamps.  You might need this if your build
+  process depends on tools like "cp -p" preserving time stamps, since
+  "cp -p" (right now) doesn't preserve the subsecond portion of a time
+  stamp.
+
+* Updated translations for French, Galician, German, Japanese, Korean,
+  and Russian.  New translations for Croatian, Danish, Hebrew, and
+  Turkish.
+
+* Updated internationalization support to Gettext 0.11.5.
+  GNU make now uses Gettext's "external" feature, and does not include
+  any internationalization code itself.  Configure will search your
+  system for an existing implementation of GNU Gettext (only GNU Gettext
+  is acceptable) and use it if it exists.  If not, NLS will be disabled.
+  See ABOUT-NLS for more information.
+
+* Updated to autoconf 2.54 and automake 1.7.  Users should not be impacted.
+
+A complete list of bugs fixed in this version is available here:
+
+  http://savannah.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=102
+
+
+Version 3.79.1 (23 Jun 2000)
+
+* .SECONDARY with no prerequisites now prevents any target from being
+  removed because make thinks it's an intermediate file, not just those
+  listed in the makefile.
+
+* New configure option --disable-nsec-timestamps, but this was
+  superseded in later versions by the .LOW_RESOLUTION_TIME pseudo-target.
+
+Version 3.79 (04 Apr 2000)
+
+* GNU make optionally supports internationalization and locales via the
+  GNU gettext (or local gettext if suitable) package.  See the ABOUT-NLS
+  file for more information on configuring GNU make for NLS.
+
+* Previously, GNU make quoted variables such as MAKEFLAGS and
+  MAKEOVERRIDES for proper parsing by the shell.  This allowed them to
+  be used within make build scripts.  However, using them there is not
+  proper behavior: they are meant to be passed to subshells via the
+  environment.  Unfortunately the values were not quoted properly to be
+  passed through the environment.  This meant that make didn't properly
+  pass some types of command line values to submakes.
+
+  With this version we change that behavior: now these variables are
+  quoted properly for passing through the environment, which is the
+  correct way to do it.  If you previously used these variables
+  explicitly within a make rule you may need to re-examine your use for
+  correctness given this change.
+
+* A new pseudo-target .NOTPARALLEL is available.  If defined, the
+  current makefile is run serially regardless of the value of -j.
+  However, submakes are still eligible for parallel execution.
+
+* The --debug option has changed: it now allows optional flags
+  controlling the amount and type of debugging output.  By default only
+  a minimal amount information is generated, displaying the names of
+  "normal" targets (not makefiles) that were deemed out of date and in
+  need of being rebuilt.
+
+  Note that the -d option behaves as before: it takes no arguments and
+  all debugging information is generated.
+
+* The `-p' (print database) output now includes filename and linenumber
+  information for variable definitions, to aid debugging.
+
+* The wordlist function no longer reverses its arguments if the "start"
+  value is greater than the "end" value.  If that's true, nothing is
+  returned.
+
+* Hartmut Becker provided many updates for the VMS port of GNU make.
+  See the README.VMS file for more details.
+
+Version 3.78 (22 Sep 1999)
+
+* Two new functions, $(error ...) and $(warning ...) are available.  The
+  former will cause make to fail and exit immediately upon expansion of
+  the function, with the text provided as the error message.  The latter
+  causes the text provided to be printed as a warning message, but make
+  proceeds normally.
+
+* A new function $(call ...) is available.  This allows users to create
+  their own parameterized macros and invoke them later.  Original
+  implementation of this function was provided by Han-Wen Nienhuys
+  <hanwen@cs.uu.nl>.
+
+* A new function $(if ...) is available.  It provides if-then-else
+  capabilities in a builtin function.  Original implementation of this
+  function was provided by Han-Wen Nienhuys <hanwen@cs.uu.nl>.
+
+* Make defines a new variable, .LIBPATTERNS.  This variable controls how
+  library dependency expansion (dependencies like ``-lfoo'') is performed.
+
+* Make accepts CRLF sequences as well as traditional LF, for
+  compatibility with makefiles created on other operating systems.
+
+* Make accepts a new option: -R, or --no-builtin-variables.  This option
+  disables the definition of the rule-specific builtin variables (CC,
+  LD, AR, etc.).  Specifying this option forces -r (--no-builtin-rules)
+  as well.
+
+* A "job server" feature, suggested by Howard Chu <hyc@highlandsun.com>.
+
+  On systems that support POSIX pipe(2) semantics, GNU make can now pass
+  -jN options to submakes rather than forcing them all to use -j1.  The
+  top make and all its sub-make processes use a pipe to communicate with
+  each other to ensure that no more than N jobs are started across all
+  makes.  To get the old behavior of -j back, you can configure make
+  with the --disable-job-server option.
+
+* The confusing term "dependency" has been replaced by the more accurate
+  and standard term "prerequisite", both in the manual and in all GNU make
+  output.
+
+* GNU make supports the "big archive" library format introduced in AIX 4.3.
+
+* GNU make supports large files on AIX, HP-UX, and IRIX.  These changes
+  were provided by Paul Eggert <eggert@twinsun.com>.  (Large file
+  support for Solaris and Linux was introduced in 3.77, but the
+  configuration had issues: these have also been resolved).
+
+* The Windows 95/98/NT (W32) version of GNU make now has native support
+  for the Cygnus Cygwin release B20.1 shell (bash).
+
+* The GNU make regression test suite, long available separately "under
+  the table", has been integrated into the release.  You can invoke it
+  by running "make check" in the distribution.  Note that it requires
+  Perl (either Perl 4 or Perl 5) to run.
+
+Version 3.77 (28 Jul 1998)
+
+* Implement BSD make's "?=" variable assignment operator.  The variable
+  is assigned the specified value only if that variable is not already
+  defined.
+
+* Make defines a new variable, "CURDIR", to contain the current working
+  directory (after the -C option, if any, has been processed).
+  Modifying this variable has no effect on the operation of make.
+
+* Make defines a new default RCS rule, for new-style master file
+  storage: ``% :: RCS/%'' (note no ``,v'' suffix).
+
+  Make defines new default rules for DOS-style C++ file naming
+  conventions, with ``.cpp'' suffixes.  All the same rules as for
+  ``.cc'' and ``.C'' suffixes are provided, along with LINK.cpp and
+  COMPILE.cpp macros (which default to the same value as LINK.cc and
+  COMPILE.cc).  Note CPPFLAGS is still C preprocessor flags!  You should
+  use CXXFLAGS to change C++ compiler flags.
+
+* A new feature, "target-specific variable values", has been added.
+  This is a large change so please see the appropriate sections of the
+  manual for full details.  Briefly, syntax like this:
+
+    TARGET: VARIABLE = VALUE
+
+  defines VARIABLE as VALUE within the context of TARGET.  This is
+  similar to SunOS make's "TARGET := VARIABLE = VALUE" feature.  Note
+  that the assignment may be of any type, not just recursive, and that
+  the override keyword is available.
+
+  COMPATIBILITY: This new syntax means that if you have any rules where
+  the first or second dependency has an equal sign (=) in its name,
+  you'll have to escape them with a backslash: "foo : bar\=baz".
+  Further, if you have any dependencies which already contain "\=",
+  you'll have to escape both of them: "foo : bar\\\=baz".
+
+* A new appendix listing the most common error and warning messages
+  generated by GNU make, with some explanation, has been added to the
+  GNU make User's Manual.
+
+* Updates to the GNU make Customs library support (see README.customs).
+
+* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32),
+  and to the DOS port from Eli Zaretski (see README.DOS).
+
+Version 3.76.1 (19 Sep 1997)
+
+* Small (but serious) bug fix.  Quick rollout to get into the GNU source CD.
+
+Version 3.76 (16 Sep 1997)
+
+* GNU make now uses automake to control Makefile.in generation.  This
+  should make it more consistent with the GNU standards.
+
+* VPATH functionality has been changed to incorporate the VPATH+ patch,
+  previously maintained by Paul Smith <psmith@baynetworks.com>.  See the
+  manual.
+
+* Make defines a new variable, `MAKECMDGOALS', to contain the goals that
+  were specified on the command line, if any.  Modifying this variable
+  has no effect on the operation of make.
+
+* A new function, `$(wordlist S,E,TEXT)', is available: it returns a
+  list of words from number S to number E (inclusive) of TEXT.
+
+* Instead of an error, detection of future modification times gives a
+  warning and continues.  The warning is repeated just before GNU make
+  exits, so it is less likely to be lost.
+
+* Fix the $(basename) and $(suffix) functions so they only operate on
+  the last filename, not the entire string:
+
+      Command              Old Result             New Result
+      -------              ----------             ----------
+    $(basename a.b)        a                      a
+    $(basename a.b/c)      a                      a.b/c
+    $(suffix a.b)          b                      b
+    $(suffix a.b/c)        b/c                    <empty>
+
+* The $(strip) function now removes newlines as well as TABs and spaces.
+
+* The $(shell) function now changes CRLF (\r\n) pairs to a space as well
+  as newlines (\n).
+
+* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32).
+
+* Eli Zaretskii has updated the port to 32-bit protected mode on MSDOS
+  and MS-Windows, building with the DJGPP v2 port of GNU C/C++ compiler
+  and utilities.  See README.DOS for details, and direct all questions
+  concerning this port to Eli Zaretskii <eliz@is.elta.co.il> or DJ
+  Delorie <dj@delorie.com>.
+
+* John W. Eaton has updated the VMS port to support libraries and VPATH.
+
+Version 3.75 (27 Aug 1996)
+
+* The directory messages printed by `-w' and implicitly in sub-makes,
+  are now omitted if Make runs no commands and has no other messages to print.
+
+* Make now detects files that for whatever reason have modification times
+  in the future and gives an error.  Files with such impossible timestamps
+  can result from unsynchronized clocks, or archived distributions
+  containing bogus timestamps; they confuse Make's dependency engine
+  thoroughly.
+
+* The new directive `sinclude' is now recognized as another name for
+  `-include', for compatibility with some other Makes.
+
+* Aaron Digulla has contributed a port to AmigaDOS.  See README.Amiga for
+  details, and direct all Amiga-related questions to <digulla@fh-konstanz.de>.
+
+* Rob Tulloh of Tivoli Systems has contributed a port to Windows NT or 95.
+  See README.W32 for details, and direct all Windows-related questions to
+  <rob_tulloh@tivoli.com>.
+
+Version 3.73 (05 Apr 1995)
+
+* Converted to use Autoconf version 2, so `configure' has some new options.
+  See INSTALL for details.
+
+* You can now send a SIGUSR1 signal to Make to toggle printing of debugging
+  output enabled by -d, at any time during the run.
+
+Version 3.72 (04 Nov 1994)
+
+* DJ Delorie has ported Make to MS-DOS using the GO32 extender.
+  He is maintaining the DOS port, not the GNU Make maintainer;
+  please direct bugs and questions for DOS to <djgpp@sun.soe.clarkson.edu>.
+  MS-DOS binaries are available for FTP from ftp.simtel.net in
+  /pub/simtelnet/gnu/djgpp/.
+
+* The `MAKEFLAGS' variable (in the environment or in a makefile) can now
+  contain variable definitions itself; these are treated just like
+  command line variable definitions.  Make will automatically insert any
+  variable definitions from the environment value of `MAKEFLAGS' or from
+  the command line, into the `MAKEFLAGS' value exported to children.  The
+  `MAKEOVERRIDES' variable previously included in the value of `$(MAKE)'
+  for sub-makes is now included in `MAKEFLAGS' instead.  As before, you can
+  reset `MAKEOVERRIDES' in your makefile to avoid putting all the variables
+  in the environment when its size is limited.
+
+* If `.DELETE_ON_ERROR' appears as a target, Make will delete the target of
+  a rule if it has changed when its recipe exits with a nonzero status,
+  just as when the recipe gets a signal.
+
+* The automatic variable `$+' is new.  It lists all the dependencies like
+  `$^', but preserves duplicates listed in the makefile.  This is useful
+  for linking rules, where library files sometimes need to be listed twice
+  in the link order.
+
+* You can now specify the `.IGNORE' and `.SILENT' special targets with
+  dependencies to limit their effects to those files.  If a file appears as
+  a dependency of `.IGNORE', then errors will be ignored while running the
+  recipe to update that file.  Likewise if a file appears as a dependency
+  of `.SILENT', then the recipe to update that file will not be printed
+  before it is run.  (This change was made to conform to POSIX.2.)
+
+Version 3.71 (21 May 1994)
+
+* The automatic variables `$(@D)', `$(%D)', `$(*D)', `$(<D)', `$(?D)', and
+  `$(^D)' now omit the trailing slash from the directory name.  (This change
+  was made to comply with POSIX.2.)
+
+* The source distribution now includes the Info files for the Make manual.
+  There is no longer a separate distribution containing Info and DVI files.
+
+* You can now set the variables `binprefix' and/or `manprefix' in
+  Makefile.in (or on the command line when installing) to install GNU make
+  under a name other than `make' (i.e., ``make binprefix=g install''
+  installs GNU make as `gmake').
+
+* The built-in Texinfo rules use the new variables `TEXI2DVI_FLAGS' for
+  flags to the `texi2dvi' script, and `MAKEINFO_FLAGS' for flags to the
+  Makeinfo program.
+
+* The exit status of Make when it runs into errors is now 2 instead of 1.
+  The exit status is 1 only when using -q and some target is not up to date.
+  (This change was made to comply with POSIX.2.)
+
+Version 3.70 (03 Jan 1994)
+
+* It is no longer a fatal error to have a NUL character in a makefile.
+  You should never put a NUL in a makefile because it can have strange
+  results, but otherwise empty lines full of NULs (such as produced by
+  the `xmkmf' program) will always work fine.
+
+* The error messages for nonexistent included makefiles now refer to the
+  makefile name and line number where the `include' appeared, so Emacs's
+  C-x ` command takes you there (in case it's a typo you need to fix).
+
+Version 3.69 (07 Nov 1993)
+
+* Implicit rule search for archive member references is now done in the
+  opposite order from previous versions: the whole target name `LIB(MEM)'
+  first, and just the member name and parentheses `(MEM)' second.
+
+* Make now gives an error for an unterminated variable or function reference.
+  For example, `$(foo' with no matching `)' or `${bar' with no matching `}'.
+
+* The new default variable `MAKE_VERSION' gives the version number of
+  Make, and a string describing the remote job support compiled in (if any).
+  Thus the value (in this release) is something like `3.69' or `3.69-Customs'.
+
+* Commands in an invocation of the `shell' function are no longer run
+  with a modified environment like recipes are.  As in versions before
+  3.68, they now run with the environment that `make' started with.  We
+  have reversed the change made in version 3.68 because it turned out to
+  cause a paradoxical situation in cases like:
+
+        export variable = $(shell echo value)
+
+  When Make attempted to put this variable in the environment for a
+  recipe, it would try expand the value by running the shell command
+  `echo value'.  In version 3.68, because it constructed an environment
+  for that shell command in the same way, Make would begin to go into an
+  infinite loop and then get a fatal error when it detected the loop.
+
+* The recipe given for `.DEFAULT' is now used for phony targets with no
+  recipe.
+
+Version 3.68 (28 Jul 1993)
+
+* You can list several archive member names inside parenthesis:
+  `lib(mem1 mem2 mem3)' is equivalent to `lib(mem1) lib(mem2) lib(mem3)'.
+
+* You can use wildcards inside archive member references.  For example,
+  `lib(*.o)' expands to all existing members of `lib' whose names end in
+  `.o' (e.g. `lib(a.o) lib(b.o)'); `*.a(*.o)' expands to all such members
+  of all existing files whose names end in `.a' (e.g. `foo.a(a.o)
+  foo.a(b.o) bar.a(c.o) bar.a(d.o)'.
+
+* A suffix rule `.X.a' now produces two pattern rules:
+        (%.o): %.X	# Previous versions produced only this.
+        %.a: %.X	# Now produces this as well, just like other suffixes.
+
+* The new flag `--warn-undefined-variables' says to issue a warning message
+  whenever Make expands a reference to an undefined variable.
+
+* The new `-include' directive is just like `include' except that there is
+  no error (not even a warning) for a nonexistent makefile.
+
+* Commands in an invocation of the `shell' function are now run with a
+  modified environment like recipes are, so you can use `export' et al
+  to set up variables for them.  They used to run with the environment
+  that `make' started with.
+
+Version 3.66 (21 May 1993)
+
+* `make --version' (or `make -v') now exits immediately after printing
+  the version number.
+
+Version 3.65 (09 May 1993)
+
+* Make now supports long-named members in `ar' archive files.
+
+Version 3.64 (21 Apr 1993)
+
+* Make now supports the `+=' syntax for a variable definition which appends
+  to the variable's previous value.  See the section `Appending More Text
+  to Variables' in the manual for full details.
+
+* The new option `--no-print-directory' inhibits the `-w' or
+  `--print-directory' feature.  Make turns on `--print-directory'
+  automatically if you use `-C' or `--directory', and in sub-makes; some
+  users have found this behavior undesirable.
+
+* The built-in implicit rules now support the alternative extension
+  `.txinfo' for Texinfo files, just like `.texinfo' and `.texi'.
+
+Version 3.63 (22 Jan 1993)
+
+* Make now uses a standard GNU `configure' script.  See the new file
+  INSTALL for the new (and much simpler) installation procedure.
+
+* There is now a shell script to build Make the first time, if you have no
+  other `make' program.  `build.sh' is created by `configure'; see README.
+
+* GNU Make now completely conforms to the POSIX.2 specification for `make'.
+
+* Elements of the `$^' and `$?' automatic variables that are archive
+  member references now list only the member name, as in Unix and POSIX.2.
+
+* You should no longer ever need to specify the `-w' switch, which prints
+  the current directory before and after Make runs.  The `-C' switch to
+  change directory, and recursive use of Make, now set `-w' automatically.
+
+* Multiple double-colon rules for the same target will no longer have their
+  recipes run simultaneously under -j, as this could result in the two
+  recipes trying to change the file at the same time and interfering with
+  one another.
+
+* The `SHELL' variable is now never taken from the environment.
+  Each makefile that wants a shell other than the default (/bin/sh) must
+  set SHELL itself.  SHELL is always exported to child processes.
+  This change was made for compatibility with POSIX.2.
+
+* Make now accepts long options.  There is now an informative usage message
+  that tells you what all the options are and what they do.  Try `make --help'.
+
+* There are two new directives: `export' and `unexport'.  All variables are
+  no longer automatically put into the environments of the recipe lines that
+  Make runs.  Instead, only variables specified on the command line or in
+  the environment are exported by default.  To export others, use:
+        export VARIABLE
+  or you can define variables with:
+        export VARIABLE = VALUE
+  or:
+        export VARIABLE := VALUE
+  You can use just:
+        export
+  or:
+        .EXPORT_ALL_VARIABLES:
+  to get the old behavior.  See the node `Variables/Recursion' in the manual
+  for a full description.
+
+* The recipe from the `.DEFAULT' special target is only applied to
+  targets which have no rules at all, not all targets with no recipe.
+  This change was made for compatibility with Unix make.
+
+* All fatal error messages now contain `***', so they are easy to find in
+  compilation logs.
+
+* Dependency file names like `-lNAME' are now replaced with the actual file
+  name found, as with files found by normal directory search (VPATH).
+  The library file `libNAME.a' may now be found in the current directory,
+  which is checked before VPATH; the standard set of directories (/lib,
+  /usr/lib, /usr/local/lib) is now checked last.
+  See the node `Libraries/Search' in the manual for full details.
+
+* A single `include' directive can now specify more than one makefile to
+  include, like this:
+        include file1 file2
+  You can also use shell file name patterns in an `include' directive:
+        include *.mk
+
+* The default directories to search for included makefiles, and for
+  libraries specified with `-lNAME', are now set by configuration.
+
+* You can now use blanks as well as colons to separate the directories in a
+  search path for the `vpath' directive or the `VPATH' variable.
+
+* You can now use variables and functions in the left hand side of a
+  variable assignment, as in "$(foo)bar = value".
+
+* The `MAKE' variable is always defined as `$(MAKE_COMMAND) $(MAKEOVERRIDES)'.
+  The `MAKE_COMMAND' variable is now defined to the name with which make
+  was invoked.
+
+* The built-in rules for C++ compilation now use the variables `$(CXX)' and
+  `$(CXXFLAGS)' instead of `$(C++)' and `$(C++FLAGS)'.  The old names had
+  problems with shells that cannot have `+' in environment variable names.
+
+* The value of a recursively expanded variable is now expanded when putting
+  it into the environment for child processes.  This change was made for
+  compatibility with Unix make.
+
+* A rule with no targets before the `:' is now accepted and ignored.
+  This change was made for compatibility with SunOS 4 make.
+  We do not recommend that you write your makefiles to take advantage of this.
+
+* The `-I' switch can now be used in MAKEFLAGS, and are put there
+  automatically just like other switches.
+
+Version 3.61
+
+* Built-in rules for C++ source files with the `.C' suffix.
+  We still recommend that you use `.cc' instead.
+
+* If a recipe is given too many times for a single target, the last one
+  given is used, and a warning message is printed.
+
+* Error messages about makefiles are in standard GNU error format,
+  so C-x ` in Emacs works on them.
+
+* Dependencies of pattern rules which contain no % need not actually exist
+  if they can be created (just like dependencies which do have a %).
+
+Version 3.60
+
+* A message is always printed when Make decides there is nothing to be done.
+  It used to be that no message was printed for top-level phony targets
+  (because "`phony' is up to date" isn't quite right).  Now a different
+  message "Nothing to be done for `phony'" is printed in that case.
+
+* Archives on AIX now supposedly work.
+
+* When the recipes specified for .DEFAULT are used to update a target,
+  the $< automatic variable is given the same value as $@ for that target.
+  This is how Unix make behaves, and this behavior is mandated by POSIX.2.
+
+Version 3.59
+
+* The -n, -q, and -t options are not put in the `MAKEFLAGS' and `MFLAG'
+  variables while remaking makefiles, so recursive makes done while remaking
+  makefiles will behave properly.
+
+* If the special target `.NOEXPORT' is specified in a makefile,
+  only variables that came from the environment and variables
+  defined on the command line are exported.
+
+Version 3.58
+
+* Suffix rules may have dependencies (which are ignored).
+
+Version 3.57
+
+* Dependencies of the form `-lLIB' are searched for as /usr/local/lib/libLIB.a
+  as well as libLIB.a in /usr/lib, /lib, the current directory, and VPATH.
+
+Version 3.55
+
+* There is now a Unix man page for GNU Make.  It is certainly not a
+  replacement for the Texinfo manual, but it documents the basic
+  functionality and the switches.  For full documentation, you should
+  still read the Texinfo manual.  Thanks to Dennis Morse of Stanford
+  University for contributing the initial version of this.
+
+* Variables which are defined by default (e.g., `CC') will no longer be
+  put into the environment for child processes.  (If these variables are
+  reset by the environment, makefiles, or the command line, they will
+  still go into the environment.)
+
+* Makefiles which have recipes but no dependencies (and thus are always
+  considered out of date and in need of remaking), will not be remade (if they
+  were being remade only because they were makefiles).  This means that GNU
+  Make will no longer go into an infinite loop when fed the makefiles that
+  `imake' (necessary to build X Windows) produces.
+
+* There is no longer a warning for using the `vpath' directive with an explicit
+pathname (instead of a `%' pattern).
+
+Version 3.51
+
+* When removing intermediate files, only one `rm' command line is printed,
+  listing all file names.
+
+* There are now automatic variables `$(^D)', `$(^F)', `$(?D)', and `$(?F)'.
+  These are the directory-only and file-only versions of `$^' and `$?'.
+
+* Library dependencies given as `-lNAME' will use "libNAME.a" in the current
+  directory if it exists.
+
+* The automatic variable `$($/)' is no longer defined.
+
+* Leading `+' characters on a recipe line make that line be executed even
+  under -n, -t, or -q (as if the line contained `$(MAKE)').
+
+* For recipe lines containing `$(MAKE)', `${MAKE}', or leading `+' characters,
+  only those lines are executed, not the entire recipe.
+  (This is how Unix make behaves for lines containing `$(MAKE)' or `${MAKE}'.)
+
+Version 3.50
+
+* Filenames in rules will now have ~ and ~USER expanded.
+
+* The `-p' output has been changed so it can be used as a makefile.
+  (All information that isn't specified by makefiles is prefaced with comment
+  characters.)
+
+Version 3.49
+
+* The % character can be quoted with backslash in implicit pattern rules,
+  static pattern rules, `vpath' directives, and `patsubst', `filter', and
+  `filter-out' functions.  A warning is issued if a `vpath' directive's
+  pattern contains no %.
+
+* The `wildcard' variable expansion function now expands ~ and ~USER.
+
+* Messages indicating failed recipe lines now contain the target name:
+        make: *** [target] Error 1
+
+* The `-p' output format has been changed somewhat to look more like
+  makefile rules and to give all information that Make has about files.
+
+Version 3.48
+
+Version 3.47
+
+* The `-l' switch with no argument removes any previous load-average limit.
+
+* When the `-w' switch is in effect, and Make has updated makefiles,
+  it will write a `Leaving directory' message before re-executing itself.
+  This makes the `directory change tracking' changes to Emacs's compilation
+  commands work properly.
+
+Version 3.46
+
+* The automatic variable `$*' is now defined for explicit rules,
+  as it is in Unix make.
+
+Version 3.45
+
+* The `-j' switch is now put in the MAKEFLAGS and MFLAGS variables when
+  specified without an argument (indicating infinite jobs).
+  The `-l' switch is not always put in the MAKEFLAGS and MFLAGS variables.
+
+* Make no longer checks hashed directories after running recipes.
+  The behavior implemented in 3.41 caused too much slowdown.
+
+Version 3.44
+
+* A dependency is NOT considered newer than its dependent if
+  they have the same modification time.  The behavior implemented
+  in 3.43 conflicts with RCS.
+
+Version 3.43
+
+* Dependency loops are no longer fatal errors.
+
+* A dependency is considered newer than its dependent if
+  they have the same modification time.
+
+Version 3.42
+
+* The variables F77 and F77FLAGS are now set by default to $(FC) and
+  $(FFLAGS).  Makefiles designed for System V make may use these variables in
+  explicit rules and expect them to be set.  Unfortunately, there is no way to
+  make setting these affect the Fortran implicit rules unless FC and FFLAGS
+  are not used (and these are used by BSD make).
+
+Version 3.41
+
+* Make now checks to see if its hashed directories are changed by recipes.
+  Other makes that hash directories (Sun, 4.3 BSD) don't do this.
+
+Version 3.39
+
+* The `shell' function no longer captures standard error output.
+
+Version 3.32
+
+* A file beginning with a dot can be the default target if it also contains
+  a slash (e.g., `../bin/foo').  (Unix make allows this as well.)
+
+Version 3.31
+
+* Archive member names are truncated to 15 characters.
+
+* Yet more USG stuff.
+
+* Minimal support for Microport System V (a 16-bit machine and a
+  brain-damaged compiler).  This has even lower priority than other USG
+  support, so if it gets beyond trivial, I will take it out completely.
+
+* Revamped default implicit rules (not much visible change).
+
+* The -d and -p options can come from the environment.
+
+Version 3.30
+
+* Improved support for USG and HPUX (hopefully).
+
+* A variable reference like `$(foo:a=b)', if `a' contains a `%', is
+  equivalent to `$(patsubst a,b,$(foo))'.
+
+* Defining .DEFAULT with no deps or recipe clears its recipe.
+
+* New default implicit rules for .S (cpp, then as), and .sh (copy and
+  make executable).  All default implicit rules that use cpp (even
+  indirectly), use $(CPPFLAGS).
+
+Version 3.29
+
+* Giving the -j option with no arguments gives you infinite jobs.
+
+Version 3.28
+
+* New option: "-l LOAD" says not to start any new jobs while others are
+  running if the load average is not below LOAD (a floating-point number).
+
+* There is support in place for implementations of remote command execution
+  in Make.  See the file remote.c.
+
+Version 3.26
+
+* No more than 10 directories will be kept open at once.
+  (This number can be changed by redefining MAX_OPEN_DIRECTORIES in dir.c.)
+
+Version 3.25
+
+* Archive files will have their modification times recorded before doing
+  anything that might change their modification times by updating an archive
+  member.
+
+Version 3.20
+
+* The `MAKELEVEL' variable is defined for use by makefiles.
+
+Version 3.19
+
+* The recursion level indications in error messages are much shorter than
+  they were in version 3.14.
+
+Version 3.18
+
+* Leading spaces before directives are ignored (as documented).
+
+* Included makefiles can determine the default goal target.
+  (System V Make does it this way, so we are being compatible).
+
+Version 3.14.
+
+* Variables that are defaults built into Make will not be put in the
+  environment for children.  This just saves some environment space and,
+  except under -e, will be transparent to sub-makes.
+
+* Error messages from sub-makes will indicate the level of recursion.
+
+* Hopefully some speed-up for large directories due to a change in the
+  directory hashing scheme.
+
+* One child will always get a standard input that is usable.
+
+* Default makefiles that don't exist will be remade and read in.
+
+Version 3.13.
+
+* Count parentheses inside expansion function calls so you can
+  have nested calls: `$(sort $(foreach x,a b,$(x)))'.
+
+Version 3.12.
+
+* Several bug fixes, including USG and Sun386i support.
+
+* `shell' function to expand shell commands a la `
+
+* If the `-d' flag is given, version information will be printed.
+
+* The `-c' option has been renamed to `-C' for compatibility with tar.
+
+* The `-p' option no longer inhibits other normal operation.
+
+* Makefiles will be updated and re-read if necessary.
+
+* Can now run several recipes at once (parallelism), -j option.
+
+* Error messages will contain the level of Make recursion, if any.
+
+* The `MAKEFLAGS' and `MFLAGS' variables will be scanned for options after
+  makefiles are read.
+
+* A double-colon rule with no dependencies will always have its recipe run.
+  (This is how both the BSD and System V versions of Make do it.)
+
+Version 3.05
+
+(Changes from versions 1 through 3.05 were never recorded.  Sorry.)
+
+-------------------------------------------------------------------------------
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/NMakefile b/NMakefile
new file mode 100644
index 0000000..6ed11a7
--- /dev/null
+++ b/NMakefile
@@ -0,0 +1,360 @@
+# -*-Makefile-*- to build GNU make with nmake
+#
+# NOTE: If you have no 'make' program at all to process this makefile,
+# run 'build_w32.bat' instead.
+#
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+LINK = link
+CC = cl
+MAKE = nmake
+
+OUTDIR=.
+MAKEFILE=NMakefile
+SUBPROC_MAKEFILE=NMakefile
+
+CFLAGS_any = /nologo /MT /W4 /GX /Zi /YX /I . /I glob /I w32/include /D WIN32 /D WINDOWS32 /D _CONSOLE /D HAVE_CONFIG_H
+CFLAGS_debug = $(CFLAGS_any) /Od /D DEBUG /D _DEBUG /FR.\WinDebug/ /Fp.\WinDebug/make.pch /Fo.\WinDebug/ /Fd.\WinDebug/make.pdb
+CFLAGS_release = $(CFLAGS_any) /O2 /D NDEBUG /FR.\WinRel/ /Fp.\WinRel/make.pch /Fo.\WinRel/
+
+LDFLAGS_debug = w32\subproc\WinDebug\subproc.lib /NOLOGO /SUBSYSTEM:console\
+	/STACK:0x400000 /INCREMENTAL:no /PDB:WinDebug/make.pdb /OUT:WinDebug/make.exe /DEBUG
+LDFLAGS_release = w32\subproc\WinRel\subproc.lib /NOLOGO /SUBSYSTEM:console\
+	/STACK:0x400000 /INCREMENTAL:no /OUT:WinRel/make.exe
+
+all: config.h subproc Release Debug
+
+#
+# Make sure we build the subproc library first. It has it's own
+# makefile. To be portable to Windows 95, we put the instructions
+# on how to build the library into a batch file. On NT, we could
+# simply have done foo && bar && dog, but this doesn't port.
+#
+subproc: w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib
+
+w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib: w32/subproc/misc.c w32/subproc/sub_proc.c w32/subproc/w32err.c
+	subproc.bat $(SUBPROC_MAKEFILE) $(MAKE)
+	if exist WinDebug\make.exe erase WinDebug\make.exe
+	if exist WinRel\make.exe erase WinRel\make.exe
+
+config.h: config.h.W32
+	copy $? $@
+
+Release:
+	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_release)" CFLAGS="$(CFLAGS_release)" OUTDIR=WinRel WinRel/make.exe
+Debug:
+	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_debug)" CFLAGS="$(CFLAGS_debug)" OUTDIR=WinDebug WinDebug/make.exe
+
+clean:
+	if exist WinDebug\nul rmdir /s /q WinDebug
+	if exist WinRel\nul rmdir /s /q WinRel
+	if exist w32\subproc\WinDebug\nul rmdir /s /q w32\subproc\WinDebug
+	if exist w32\subproc\WinRel\nul rmdir /s /q w32\subproc\WinRel
+	if exist config.h erase config.h
+	erase *.pdb
+
+$(OUTDIR):
+	if not exist .\$@\nul mkdir .\$@
+
+LIBS = kernel32.lib user32.lib advapi32.lib
+
+guile = $(OUTDIR)/guile.obj
+
+OBJS = \
+	$(OUTDIR)/ar.obj \
+	$(OUTDIR)/arscan.obj \
+	$(OUTDIR)/commands.obj \
+	$(OUTDIR)/default.obj \
+	$(OUTDIR)/dir.obj \
+	$(OUTDIR)/expand.obj \
+	$(OUTDIR)/file.obj \
+	$(OUTDIR)/function.obj \
+	$(OUTDIR)/getloadavg.obj \
+	$(OUTDIR)/getopt.obj \
+	$(OUTDIR)/getopt1.obj \
+	$(OUTDIR)/hash.obj \
+	$(OUTDIR)/implicit.obj \
+	$(OUTDIR)/job.obj \
+	$(OUTDIR)/load.obj \
+	$(OUTDIR)/main.obj \
+	$(OUTDIR)/misc.obj \
+	$(OUTDIR)/output.obj \
+	$(OUTDIR)/read.obj \
+	$(OUTDIR)/remake.obj \
+	$(OUTDIR)/remote-stub.obj \
+	$(OUTDIR)/rule.obj \
+	$(OUTDIR)/signame.obj \
+	$(OUTDIR)/strcache.obj \
+	$(OUTDIR)/variable.obj \
+	$(OUTDIR)/version.obj \
+	$(OUTDIR)/vpath.obj \
+	$(OUTDIR)/glob.obj \
+	$(OUTDIR)/fnmatch.obj \
+	$(OUTDIR)/dirent.obj \
+	$(OUTDIR)/pathstuff.obj \
+	$(OUTDIR)/posixfcn.obj \
+	$(guile)
+
+$(OUTDIR)/make.exe: $(OUTDIR) $(OBJS)
+	$(LINK) @<<
+		$(LDFLAGS) $(LIBS) $(OBJS)
+<<
+
+.c{$(OUTDIR)}.obj:
+	$(CC) $(CFLAGS) /c $<
+
+$(OUTDIR)/glob.obj : glob/glob.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/fnmatch.obj : glob/fnmatch.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/dirent.obj : w32/compat/dirent.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/posixfcn.obj : w32/compat/posixfcn.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/pathstuff.obj : w32/pathstuff.c
+	$(CC) $(CFLAGS) /c $?
+
+# --------------- DEPENDENCIES
+#
+
+# .deps/alloca.Po
+# dummy
+
+# .deps/ar.Po
+$(OUTDIR)/ar.obj: ar.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+
+# .deps/arscan.Po
+$(OUTDIR)/arscan.obj: arscan.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/commands.Po
+$(OUTDIR)/commands.obj: commands.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h
+
+# .deps/default.Po
+$(OUTDIR)/default.obj: default.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h variable.h rule.h dep.h job.h output.h \
+ commands.h
+
+# .deps/dir.Po
+$(OUTDIR)/dir.obj: dir.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h filedef.h dep.h \
+
+# .deps/expand.Po
+$(OUTDIR)/expand.obj: expand.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/file.Po
+$(OUTDIR)/file.obj: file.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h \
+ debug.h
+
+# .deps/function.Po
+$(OUTDIR)/function.obj: function.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h job.h output.h \
+ commands.h debug.h
+
+# .deps/getloadavg.Po
+# dummy
+
+# .deps/getopt.Po
+$(OUTDIR)/getopt.obj: getopt.c config.h \
+
+# .deps/getopt1.Po
+$(OUTDIR)/getopt1.obj: getopt1.c config.h getopt.h \
+
+# .deps/guile.Po
+$(OUTDIR)/guile.obj: guile.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ dep.h variable.h \
+ gmk-default.h
+
+# .deps/hash.Po
+$(OUTDIR)/hash.obj: hash.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/implicit.Po
+$(OUTDIR)/implicit.obj: implicit.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h rule.h \
+ dep.h debug.h variable.h job.h output.h \
+ commands.h
+
+# .deps/job.Po
+$(OUTDIR)/job.obj: job.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+ debug.h filedef.h hash.h \
+ commands.h variable.h
+
+# .deps/load.Po
+$(OUTDIR)/load.obj: load.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ variable.h
+
+# .deps/loadapi.Po
+$(OUTDIR)/loadapi.obj: loadapi.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h
+
+# .deps/loadavg-getloadavg.Po
+# dummy
+
+# .deps/main.Po
+$(OUTDIR)/main.obj: main.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h rule.h debug.h \
+ getopt.h
+
+# .deps/misc.Po
+$(OUTDIR)/misc.obj: misc.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ debug.h \
+
+# .deps/output.Po
+$(OUTDIR)/output.obj: output.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+
+# .deps/read.Po
+$(OUTDIR)/read.obj: read.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h \
+ debug.h
+
+# .deps/remake.Po
+$(OUTDIR)/remake.obj: remake.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h dep.h variable.h \
+ debug.h
+
+# .deps/remote-cstms.Po
+# dummy
+
+# .deps/remote-stub.Po
+$(OUTDIR)/remote-stub.obj: remote-stub.c makeint.h \
+ config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h
+
+# .deps/rule.Po
+$(OUTDIR)/rule.obj: rule.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/signame.Po
+$(OUTDIR)/signame.obj: signame.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/strcache.Po
+$(OUTDIR)/strcache.obj: strcache.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/variable.Po
+$(OUTDIR)/variable.obj: variable.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/version.Po
+$(OUTDIR)/version.obj: version.c config.h
+
+# .deps/vmsjobs.Po
+# dummy
+
+# .deps/vpath.Po
+$(OUTDIR)/vpath.obj: vpath.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h
diff --git a/README b/README
new file mode 100644
index 0000000..9ed662a
--- /dev/null
+++ b/README
@@ -0,0 +1,178 @@
+This directory contains the 4.1 release of GNU Make.
+
+See the file NEWS for the user-visible changes from previous releases.
+In addition, there have been bugs fixed.
+
+Please check the system-specific notes below for any caveats related to
+your operating system.
+
+For general building and installation instructions, see the file INSTALL.
+
+If you need to build GNU Make and have no other 'make' program to use,
+you can use the shell script 'build.sh' instead.  To do this, first run
+'configure' as described in INSTALL.  Then, instead of typing 'make' to
+build the program, type 'sh build.sh'.  This should compile the program
+in the current directory.  Then you will have a Make program that you can
+use for './make install', or whatever else.
+
+Some systems' Make programs are broken and cannot process the Makefile for
+GNU Make.  If you get errors from your system's Make when building GNU
+Make, try using 'build.sh' instead.
+
+
+GNU Make is free software.  See the file COPYING for copying conditions.
+GNU Make is copyright by the Free Software Foundation.  Copyright notices
+condense sequential years into a range; e.g. "1987-1994" means all years
+from 1987 to 1994 inclusive.
+
+Downloading
+-----------
+
+GNU Make can be obtained in many different ways.  See a description here:
+
+  http://www.gnu.org/software/software.html
+
+
+Documentation
+-------------
+
+GNU make is fully documented in the GNU Make manual, which is contained
+in this distribution as the file make.texinfo.  You can also find
+on-line and preformatted (PostScript and DVI) versions at the FSF's web
+site.  There is information there about ordering hardcopy documentation.
+
+  http://www.gnu.org/
+  http://www.gnu.org/doc/doc.html
+  http://www.gnu.org/manual/manual.html
+
+
+Development
+-----------
+
+GNU Make development is hosted by Savannah, the FSF's online development
+management tool.  Savannah is here:
+
+  http://savannah.gnu.org
+
+And the GNU Make development page is here:
+
+  http://savannah.gnu.org/projects/make/
+
+You can find most information concerning the development of GNU Make at
+this site.
+
+
+Bug Reporting
+-------------
+
+You can send GNU make bug reports to <bug-make@gnu.org>.  Please see the
+section of the GNU make manual entitled 'Problems and Bugs' for
+information on submitting useful and complete bug reports.
+
+You can also use the online bug tracking system in the Savannah GNU Make
+project to submit new problem reports or search for existing ones:
+
+  http://savannah.gnu.org/bugs/?group=make
+
+If you need help using GNU make, try these forums:
+
+  help-make@gnu.org
+  help-utils@gnu.org
+  news:gnu.utils.help
+  news:gnu.utils.bug
+
+
+Git Access
+----------
+
+The GNU make source repository is available via Git from the
+GNU Savannah Git server; look here for details:
+
+  http://savannah.gnu.org/git/?group=make
+
+Please note: you won't be able to build GNU make from Git without
+installing appropriate maintainer's tools, such as GNU m4, automake,
+autoconf, Perl, GNU make, and GCC.  See the README.git file for hints on
+how to build GNU make once these tools are available.  We make no
+guarantees about the contents or quality of the latest code in the Git
+repository: it is not unheard of for code that is known to be broken to
+be checked in.  Use at your own risk.
+
+
+System-specific Notes
+---------------------
+
+It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such
+that if you compile make with 'cc -O' on AIX 3.2, it will not work
+correctly.  It is said that using 'cc' without '-O' does work.
+
+The standard /bin/sh on SunOS 4.1.3_U1 and 4.1.4 is broken and cannot be
+used to configure GNU make.  Please install a different shell such as
+bash or pdksh in order to run "configure".  See this message for more
+information:
+  http://mail.gnu.org/archive/html/bug-autoconf/2003-10/msg00190.html
+
+One area that is often a problem in configuration and porting is the code
+to check the system's current load average.  To make it easier to test and
+debug this code, you can do 'make check-loadavg' to see if it works
+properly on your system.  (You must run 'configure' beforehand, but you
+need not build Make itself to run this test.)
+
+Another potential source of porting problems is the support for large
+files (LFS) in configure for those operating systems that provide it.
+Please report any bugs that you find in this area.  If you run into
+difficulties, then as a workaround you should be able to disable LFS by
+adding the '--disable-largefile' option to the 'configure' script.
+
+On systems that support micro- and nano-second timestamp values and
+where stat(2) provides this information, GNU make will use it when
+comparing timestamps to get the most accurate possible result.  However,
+note that many current implementations of tools that *set* timestamps do
+not preserve micro- or nano-second granularity.  This means that "cp -p"
+and other similar tools (tar, etc.) may not exactly duplicate timestamps
+with micro- and nano-second granularity on some systems.  If your build
+system contains rules that depend on proper behavior of tools like "cp
+-p", you should consider using the .LOW_RESOLUTION_TIME pseudo-target to
+force make to treat them properly.  See the manual for details.
+
+
+Ports
+-----
+
+  - See README.customs for details on integrating GNU make with the
+    Customs distributed build environment from the Pmake distribution.
+
+  - See README.VMS for details about GNU Make on OpenVMS.
+
+  - See README.Amiga for details about GNU Make on AmigaDOS.
+
+  - See README.W32 for details about GNU Make on Windows NT, 95, or 98.
+
+  - See README.DOS for compilation instructions on MS-DOS and MS-Windows
+    using DJGPP tools.
+
+    A precompiled binary of the MSDOS port of GNU Make is available as part
+    of DJGPP; see the WWW page http://www.delorie.com/djgpp/ for more
+    information.
+
+Please note there are two _separate_ ports of GNU make for Microsoft
+systems: a native Windows tool built with (for example) MSVC or Cygwin,
+and a DOS-based tool built with DJGPP.  Please be sure you are looking
+at the right README!
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.Amiga b/README.Amiga
new file mode 100644
index 0000000..f9be348
--- /dev/null
+++ b/README.Amiga
@@ -0,0 +1,77 @@
+Short: Port of GNU make with SAS/C (no ixemul.library required)
+Author: GNU, Amiga port by Aaron "Optimizer" Digulla
+Uploader: Aaron "Optimizer" Digulla (digulla@fh-konstanz.de)
+Type: dev/c
+
+This is a pure Amiga port of GNU make. It needs no extra libraries or
+anything. It has the following features (in addition to any features of
+GNU make):
+
+- Runs Amiga-Commands with SystemTags() (Execute)
+- Can run multi-line statements
+- Allows to use Device-Names in targets:
+
+        c:make : make.o
+
+    is ok. To distinguish between device-names and target : or ::, MAKE
+    looks for spaces. If there are any around :, it's taken as a target
+    delimiter, if there are none, it's taken as the name of a device. Note
+    that "make:make.o" tries to create "make.o" on the device "make:".
+- Replaces @@ by a newline in any command line:
+
+        if exists make @@\
+            delete make.bak quiet @@\
+            rename make make.bak @@\
+        endif @@\
+        $(CC) Link Make.o To make
+
+    works. Note that the @@ must stand alone (i.e., "make@@\" is illegal).
+    Also be careful that there is a space after the "\" (i.e., at the
+    beginning of the next line).
+- Can be made resident to save space and time
+- Amiga specific wildcards can be used in $(wildcard ...)
+
+BUGS:
+- The line
+
+    dummy.h : src/*.c
+
+tries to make dummy.h from "src/*.c" (i.e., no wildcard-expansion takes
+place). You have to use "$(wildcard src/*.c)" instead.
+
+COMPILING FROM SCRATCH
+----------------------
+
+To recompile, you need SAS/C 6.51. make itself is not necessary, there
+is an smakefile.
+
+1. Copy config.ami to config.h
+2. If you use make to compile, copy Makefile.ami to Makefile and
+    glob/Makefile.ami to glob/Makefile. Copy make into the current
+    directory.
+
+3. Run smake/make
+
+INSTALLATION
+
+Copy make somewhere in your search path (e.g., sc:c or sc:bin).
+If you plan to use recursive makes, install make resident:
+
+    Resident make Add
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.DOS b/README.DOS
new file mode 100644
index 0000000..335661c
--- /dev/null
+++ b/README.DOS
@@ -0,0 +1,340 @@
+Port of GNU Make to 32-bit protected mode on MSDOS and MS-Windows.
+
+Builds with DJGPP v2 port of GNU C/C++ compiler and utilities.
+
+
+New (since 3.74) DOS-specific features:
+
+   1. Supports long filenames when run from DOS box on Windows 9x.
+
+   2. Supports both stock DOS COMMAND.COM and Unix-style shells
+      (details in 'Notes' below).
+
+   3. Supports DOS drive letters in dependencies and pattern rules.
+
+   4. Better support for DOS-style backslashes in pathnames (but see
+      'Notes' below).
+
+   5. The $(shell) built-in can run arbitrary complex commands,
+      including pipes and redirection, even when COMMAND.COM is your
+      shell.
+
+   6. Can be built without floating-point code (see below).
+
+   7. Supports signals in child programs and restores the original
+      directory if the child was interrupted.
+
+   8. Can be built without (a previous version of) Make.
+
+   9. The build process requires only standard tools.  (Optional
+      targets like "install:" and "clean:" still need additional
+      programs, though, see below.)
+
+  10. Beginning with v3.78, the test suite works in the DJGPP
+      environment (requires Perl and auxiliary tools; see below).
+
+
+To install a binary distribution:
+
+   Simply unzip the makNNNb.zip file (where NNN is the version number)
+   preserving the directory structure (-d switch if you use PKUNZIP).
+   If you are installing Make on Windows 9X or Windows 2000, use an
+   unzip program that supports long filenames in zip files.  After
+   unzipping, make sure the directory with make.exe is on your PATH,
+   and that's all you need to use Make.
+
+
+To build from sources:
+
+   1. Unzip the archive, preserving the directory structure (-d switch
+      if you use PKUNZIP).  If you build Make on Windows 9X or Windows
+      2000, use an unzip program that supports long filenames in zip
+      files.
+
+      If you are unpacking an official GNU source distribution, use
+      either DJTAR (which is part of the DJGPP development
+      environment), or the DJGPP port of GNU Tar.
+
+   2. Invoke the 'configure.bat' batch file.
+
+      If you are building Make in-place, i.e. in the same directory
+      where its sources are kept, just type "configure.bat" and press
+      [Enter].  Otherwise, you need to supply the path to the source
+      directory as an argument to the batch file, like this:
+
+        c:\djgpp\gnu\make-4.1\configure.bat c:/djgpp/gnu/make-4.1
+
+      Note the forward slashes in the source path argument: you MUST
+      use them here.
+
+   3. If configure.bat doesn't find a working Make, it will suggest to
+      use the 'dosbuild.bat' batch file to build Make.  Either do as it
+      suggests or install another Make program (a pre-compiled binary
+      should be available from the usual DJGPP sites) and rerun
+      configure.bat.
+
+   4. If you will need to run Make on machines without an FPU, you
+      might consider building a version of Make which doesn't issue
+      floating-point instructions (they don't help much on MSDOS
+      anyway).  To this end, edit the Makefile created by
+      configure.bat and add -DNO_FLOAT to the value of CPPFLAGS.
+
+   5. Invoke Make.
+
+      If you are building from outside of the source directory, you
+      need to tell Make where the sources are, like this:
+
+                make srcdir=c:/djgpp/gnu/make-4.1
+
+      (configure.bat will tell you this when it finishes).  You MUST
+      use a full, not relative, name of the source directory here, or
+      else Make might fail.
+
+   6. After Make finishes, if you have a Unix-style shell installed,
+      you can use the 'install' target to install the package.  You
+      will also need GNU Fileutils and GNU Sed for this (they should
+      be available from the DJGPP sites).
+
+      By default, GNU make will install into your DJGPP installation
+      area.  If you wish to use a different directory, override the
+      DESTDIR variable when invoking "make install", like this:
+
+                make install DESTDIR=c:/other/dir
+
+      This causes the make executable to be placed in c:/other/dir/bin,
+      the man pages in c:/other/dir/man, etc.
+
+      Without a Unix-style shell, you will have to install programs
+      and the docs manually.  Copy make.exe to a directory on your
+      PATH, make.i* info files to your Info directory, and update the
+      file 'dir' in your Info directory by adding the following item
+      to the main menu:
+
+        * Make: (make.info).           The GNU make utility.
+
+      If you have the 'install-info' program (from the GNU Texinfo
+      package), it will do that for you if you invoke it like this:
+
+        install-info --info-dir=c:/djgpp/info c:/djgpp/info/make.info
+
+      (If your Info directory is other than C:\DJGPP\INFO, change this
+      command accordingly.)
+
+   7. The 'clean' targets also require Unix-style shell, and GNU Sed
+      and 'rm' programs (the latter from Fileutils).
+
+   8. To run the test suite, type "make check".  This requires a Unix
+      shell (I used the DJGPP port of Bash 2.03), Perl, Sed, Fileutils
+      and Sh-utils.
+
+
+Notes:
+-----
+
+   1. The shell issue.
+
+      This is probably the most significant improvement, first
+      introduced in the port of GNU Make 3.75.
+
+      The original behavior of GNU Make is to invoke commands
+      directly, as long as they don't include characters special to
+      the shell or internal shell commands, because that is faster.
+      When shell features like redirection or filename wildcards are
+      involved, Make calls the shell.
+
+      This port supports both DOS shells (the stock COMMAND.COM and its
+      4DOS/NDOS replacements), and Unix-style shells (tested with the
+      venerable Stewartson's 'ms_sh' 2.3 and the DJGPP port of 'bash' by
+      Daisuke Aoyama <jack@st.rim.or.jp>).
+
+      When the $SHELL variable points to a Unix-style shell, Make
+      works just like you'd expect on Unix, calling the shell for any
+      command that involves characters special to the shell or
+      internal shell commands.  The only difference is that, since
+      there is no standard way to pass command lines longer than the
+      infamous DOS 126-character limit, this port of Make writes the
+      command line to a temporary disk file and then invokes the shell
+      on that file.
+
+      If $SHELL points to a DOS-style shell, however, Make will not
+      call it automatically, as it does with Unix shells.  Stock
+      COMMAND.COM is too dumb and would unnecessarily limit the
+      functionality of Make.  For example, you would not be able to
+      use long command lines in commands that use redirection or
+      pipes.  Therefore, when presented with a DOS shell, this port of
+      Make will emulate most of the shell functionality, like
+      redirection and pipes, and shall only call the shell when a
+      batch file or a command internal to the shell is invoked.  (Even
+      when a command is an internal shell command, Make will first
+      search the $PATH for it, so that if a Makefile calls 'mkdir',
+      you can install, say, a port of GNU 'mkdir' and have it called
+      in that case.)
+
+      The key to all this is the extended functionality of 'spawn' and
+      'system' functions from the DJGPP library; this port just calls
+      'system' where it would invoke the shell on Unix.  The most
+      important aspect of these functions is that they use a special
+      mechanism to pass long (up to 16KB) command lines to DJGPP
+      programs.  In addition, 'system' emulates some internal
+      commands, like 'cd' (so that you can now use forward slashes
+      with it, and can also change the drive if the directory is on
+      another drive).  Another aspect worth mentioning is that you can
+      call Unix shell scripts directly, provided that the shell whose
+      name is mentioned on the first line of the script is installed
+      anywhere along the $PATH.  It is impossible to tell here
+      everything about these functions; refer to the DJGPP library
+      reference for more details.
+
+      The $(shell) built-in is implemented in this port by calling
+      'popen'.  Since 'popen' calls 'system', the above considerations
+      are valid for $(shell) as well.  In particular, you can put
+      arbitrary complex commands, including pipes and redirection,
+      inside $(shell), which is in many cases a valid substitute for
+      the Unix-style command substitution (`command`) feature.
+
+
+   2. "SHELL=/bin/sh" -- or is it?
+
+      Many Unix Makefiles include a line which sets the SHELL, for
+      those versions of Make which don't have this as the default.
+      Since many DOS systems don't have 'sh' installed (in fact, most
+      of them don't even have a '/bin' directory), this port takes
+      such directives with a grain of salt.  It will only honor such a
+      directive if the basename of the shell name (like 'sh' in the
+      above example) can indeed be found in the directory that is
+      mentioned in the SHELL= line ('/bin' in the above example), or
+      in the current working directory, or anywhere on the $PATH (in
+      that order).  If the basename doesn't include a filename
+      extension, Make will look for any known extension that indicates
+      an executable file (.exe, .com, .bat, .btm, .sh, and even .sed
+      and .pl).  If any such file is found, then $SHELL will be
+      defined to the exact pathname of that file, and that shell will
+      hence be used for the rest of processing.  But if the named
+      shell is *not* found, the line which sets it will be effectively
+      ignored, leaving the value of $SHELL as it was before.  Since a
+      lot of decisions that this port makes depend on the gender of
+      the shell, I feel it doesn't make any sense to tailor Make's
+      behavior to a shell which is nowhere to be found.
+
+      Note that the above special handling of "SHELL=" only happens
+      for Makefiles; if you set $SHELL in the environment or on the
+      Make command line, you are expected to give the complete
+      pathname of the shell, including the filename extension.
+
+      The default value of $SHELL is computed as on Unix (see the Make
+      manual for details), except that if $SHELL is not defined in the
+      environment, $COMSPEC is used.  Also, if an environment variable
+      named $MAKESHELL is defined, it takes precedence over both
+      $COMSPEC and $SHELL.  Note that, unlike Unix, $SHELL in the
+      environment *is* used to set the shell (since on MSDOS, it's
+      unlikely that the interactive shell will not be suitable for
+      Makefile processing).
+
+      The bottom line is that you can now write Makefiles where some
+      of the targets require a real (i.e. Unix-like) shell, which will
+      nevertheless work when such shell is not available (provided, of
+      course, that the commands which should always work, don't
+      require such a shell).  More important, you can convert Unix
+      Makefiles to MSDOS and leave the line which sets the shell
+      intact, so that people who do have Unixy shell could use it for
+      targets which aren't converted to DOS (like 'install' and
+      'uninstall', for example).
+
+
+   3. Default directories.
+
+      GNU Make knows about standard directories where it searches for
+      library and include files mentioned in the Makefile.  Since
+      MSDOS machines don't have standard places for these, this port
+      will search ${DJDIR}/lib and ${DJDIR}/include respectively.
+      $DJDIR is defined automatically by the DJGPP startup code as the
+      root of the DJGPP installation tree (unless you've tampered with
+      the DJGPP.ENV file).  This should provide reasonable default
+      values, unless you moved parts of DJGPP to other directories.
+
+
+   4. Letter-case in filenames.
+
+      If you run Make on Windows 9x, you should be aware of the
+      letter-case issue.  Make is internally case-sensitive, but all
+      file operations are case-insensitive on Windows 9x, so
+      e.g. files 'FAQ', 'faq' and 'Faq' all refer to the same file, as
+      far as Windows is concerned.  The underlying DJGPP C library
+      functions honor the letter-case of the filenames they get from
+      the OS, except that by default, they down-case 8+3 DOS filenames
+      which are stored in upper case in the directory and would break
+      many Makefiles otherwise.  (The details of which filenames are
+      converted to lower case are explained in the DJGPP libc docs,
+      under the '_preserve_fncase' and '_lfn_gen_short_fname'
+      functions, but as a thumb rule, any filename that is stored in
+      upper case in the directory, is a valid DOS 8+3 filename and
+      doesn't include characters invalid on MSDOS FAT filesystems,
+      will be automatically down-cased.)  User reports that I have
+      indicate that this default behavior is generally what you'd
+      expect; however, your input is most welcome.
+
+      In any case, if you hit a situation where you must force Make to
+      get the 8+3 DOS filenames in upper case, set FNCASE=y in the
+      environment or in the Makefile.
+
+
+   5. DOS-style pathnames.
+
+      There are a lot of places throughout the program sources which
+      make implicit assumptions about the pathname syntax.  In
+      particular, the directories are assumed to be separated by '/',
+      and any pathname which doesn't begin with a '/' is assumed to be
+      relative to the current directory.  This port attempts to
+      support DOS-style pathnames which might include the drive letter
+      and use backslashes instead of forward slashes.  However, this
+      support is not complete; I feel that pursuing this support too
+      far might break some more important features, particularly if
+      you use a Unix-style shell (where a backslash is a quote
+      character).  I only consider support of backslashes desirable
+      because some Makefiles invoke non-DJGPP programs which don't
+      understand forward slashes.  A notable example of such programs
+      is the standard programs which come with MSDOS.  Otherwise, you
+      are advised to stay away from backslashes whenever possible.  In
+      particular, filename globbing won't work on pathnames with
+      backslashes, because the GNU 'glob' library doesn't support them
+      (backslash is special in filename wildcards, and I didn't want
+      to break that).
+
+      One feature which *does* work with backslashes is the filename-
+      related built-in functions such as $(dir), $(notdir), etc.
+      Drive letters in pathnames are also fully supported.
+
+
+
+Bug reports:
+-----------
+
+   Bugs that are clearly related to the MSDOS/DJGPP port should be
+   reported first on the comp.os.msdos.djgpp news group (if you cannot
+   post to Usenet groups, write to the DJGPP mailing list,
+   <djgpp@delorie.com>, which is an email gateway into the above news
+   group).  For other bugs, please follow the procedure explained in
+   the "Bugs" chapter of the Info docs.  If you don't have an Info
+   reader, look up that chapter in the 'make.i1' file with any text
+   browser/editor.
+
+
+   Enjoy,
+                        Eli Zaretskii <eliz@is.elta.co.il>
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.OS2 b/README.OS2
new file mode 100644
index 0000000..9e2045e
--- /dev/null
+++ b/README.OS2
@@ -0,0 +1,176 @@
+Port of GNU make to OS/2.
+
+Features of GNU make that do not work under OS/2:
+  - remote job execution
+  - dynamic load balancing
+
+
+Special features of the OS/2 version:
+
+Due to the fact that some people might want to use sh syntax in
+Makefiles while others might want to use OS/2's native shell cmd.exe,
+GNU make supports both shell types. The following list defines the order
+that is used to determine the shell:
+
+ 1. The shell specified by the environment variable MAKESHELL.
+ 2. The shell specified by the SHELL variable within a Makefile. Like
+    Unix, SHELL is NOT taken from the environment.
+ 3. The shell specified by the COMSPEC environment variable.
+ 4. The shell specified by the OS2_SHELL environment variable.
+ 5. If none of the above is defined /bin/sh is used as default.  This
+    happens e.g. in the make testsuite.
+
+Note: - Points 3 and 4 can be turned off at compile time by adding
+        -DNO_CMD_DEFAULT to the CPPFLAGS.
+      - DOS support is not tested for EMX and therefore might not work.
+      - The UNIXROOT environment variable is supported to find /bin/sh
+        if it is not on the current drive.
+
+
+COMPILATION OF GNU MAKE FOR OS/2:
+
+I. ***** SPECIAL OPTIONS *****
+
+ - At compile time you can turn off that cmd is used as default shell
+   (but only /bin/sh). Simply set CPPFLAGS="-DNO_CMD_DEFAULT" and make
+   will not use cmd unless you cause it to do so by setting MAKESHELL to
+   cmd or by specifying SHELL=cmd in your Makefile.
+
+ - At compile time you can set CPPFLAGS="-DNO_CHDIR2" to turn off that
+   GNU make prints drive letters. This is necessary if you want to run
+   the testsuite.
+
+
+II. ***** REQUIREMENTS FOR THE COMPILATION *****
+
+A standard Unix like build environment:
+
+ - sh compatible shell (ksh, bash, ash, but tested only with pdksh 5.2.14
+   release 2)
+   If you use pdksh it is recommended to update to 5.2.14 release 2. Older
+   versions may not work! You can get this version at
+   http://www.math.ohio-state.edu/~ilya/software/os2/pdksh-5.2.14-bin-2.zip
+ - GNU file utilities (make sure that install.exe from the file utilities
+   is in front of your PATH before X:\OS2\INSTALL\INSTALL.EXE. I recommend
+   also to change the filename to ginstall.exe instead of install.exe
+   to avoid confusion with X:\OS2\INSTALL\INSTALL.EXE)
+ - GNU shell utilities
+ - GNU text utilities
+ - gawk
+ - grep
+ - sed
+ - GNU make 3.79.1 (special OS/2 patched version) or higher
+ - perl 5.005 or higher
+ - GNU texinfo (you can use 3.1 (gnuinfo.zip), but I recommend 4.0)
+
+If you want to recreate the configuration files (developers only!)
+you need also: GNU m4 1.4, autoconf 2.59, automake 1.9.6 (or compatible)
+
+
+III. ***** COMPILATION AND INSTALLATION *****
+
+ a) ** Developers only - Everyone else should skip this section **
+    To recreate the configuration files use:
+
+      export EMXSHELL=ksh
+      aclocal -I config
+      automake
+      autoconf
+      autoheader
+
+
+b) Installation into x:/usr
+
+   Note: Although it is possible to compile make using "./configure",
+         "make", "make install" this is not recommended.  In particular,
+         you must ALWAYS use LDFLAGS="-Zstack 0x6000" because the default
+         stack size is far to small and make will not work properly!
+
+Recommended environment variables and installation options:
+
+    export ac_executable_extensions=".exe"
+    export CPPFLAGS="-D__ST_MT_ERRNO__"
+    export CFLAGS="-O2 -Zomf -Zmt"
+    export LDFLAGS="-Zcrtdll -Zlinker /exepack:2 -Zlinker /pm:vio -Zstack 0x6000"
+    export RANLIB="echo"
+    ./configure --prefix=x:/usr --infodir=x:/usr/share/info --mandir=x:/usr/share/man --without-included-gettext
+    make AR=emxomfar
+    make install
+
+Note: If you use gcc 2.9.x I recommend to set also LIBS="-lgcc"
+
+Note: You can add -DNO_CMD_DEFAULT and -DNO_CHDIR2 to CPPFLAGS.
+      See section I. for details.
+
+
+IV. ***** NLS support *****
+
+GNU make has NLS (National Language Support), with the following
+caveats:
+
+ a) It will only work with GNU gettext, and
+ b) GNU gettext support is not included in the GNU make package.
+
+Therefore, if you wish to enable the internationalization features of
+GNU make you must install GNU gettext on your system before configuring
+GNU make.
+
+You can choose the languages to be installed. To install support for
+English, German and French only enter:
+
+  export LINGUAS="en de fr"
+
+If you don't specify LINGUAS all languages are installed.
+
+If you don't want NLS support (English only) use the option
+--disable-nls for the configure script.  Note if GNU gettext is not
+installed then NLS will not be enabled regardless of this flag.
+
+
+V. ***** Running the make test suite *****
+
+To run the included make test suite you have to set
+
+  CPPFLAGS="-D__ST_MT_ERRNO__ -DNO_CMD_DEFAULT -DNO_CHDIR2"
+
+before you compile make. This is due to some restrictions of the
+testsuite itself. -DNO_CMD_DEFAULT causes make to use /bin/sh as default
+shell in every case. Normally you could simply set MAKESHELL="/bin/sh"
+to do this but the testsuite ignores the environment. -DNO_CHDIR2 causes
+make not to use drive letters for directory names (i.e. _chdir2() and
+_getcwd2() are NOT used).  The testsuite interpretes the whole output of
+make, especially statements like make[1]: Entering directory
+'C:/somewhere/make-3.79.1/tests' where the testsuite does not expect the
+drive letter. This would be interpreted as an error even if there is
+none.
+
+To run the testsuite do the following:
+
+  export CPPFLAGS="-D__ST_MT_ERRNO__ -DNO_CMD_DEFAULT -DNO_CHDIR2"
+  export CFLAGS="-Zomf -O2 -Zmt"
+  export LDFLAGS="-Zcrtdll -s -Zlinker /exepack:2 -Zlinker /pm:vio -Zstack 0x6000"
+  export RANLIB="echo"
+  ./configure --prefix=x:/usr --disable-nls
+  make AR=emxomfar
+  make check
+
+All tests should work fine with the exception of one of the "INCLUDE_DIRS"
+tests which will fail if your /usr/include directory is on a drive different
+from the make source tree.
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 2003-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.VMS b/README.VMS
new file mode 100644
index 0000000..2ff553c
--- /dev/null
+++ b/README.VMS
@@ -0,0 +1,284 @@
+This version of GNU make has been tested on
+OpenVMS V8.3 (Alpha) and V8.4 (Integrity).
+
+Build instructions
+------------------
+Make a 1st version
+       $ @makefile.com  ! ignore any compiler and/or linker warning
+       $ copy make.exe 1st-make.exe
+  Use the 1st version to generate a 2nd version
+       $ mc sys$disk:[]1st-make clean  ! ignore any file not found messages
+       $ mc sys$disk:[]1st-make
+  Verify your 2nd version
+       $ copy make.exe 2nd-make.exe
+       $ mc sys$disk:[]2nd-make clean
+       $ mc sys$disk:[]2nd-make
+  Don't use the HP C V7.2-001 compiler, which has an incompatible change
+  how __STDC__ is defined. This results at least in compile time warnings.
+
+Changes since GNU make 3.82
+---------------------------
+
+Fix build problems.
+
+The new feature "Loadable objects" is not yet supported. If you need it,
+please send a change request or submit a bug report.
+
+The new option --output-sync (-O) is accepted but has no effect: GNU make
+for VMS does not support running multiple commands simultaneously.
+
+Changes for GNU make 3.82
+
+Michael Gehre (at VISTEC-SEMI dot COM) supplied a fix for a problem with
+timestamps of object modules in OLBs. The timestamps were not correctly
+adjusted to GMT based time, if the local VMS time was using a daylight saving
+algorithm and if daylight saving was switched off.
+
+John Eisenbraun (at HP dot COM) supplied fixes and and an enhancement to append
+output redirection in action lines.
+
+Rework of ctrl+c and ctrl+y handling.
+
+Fix a problem with cached strings, which showed on case-insensitive file
+systems.
+
+Build fixes for const-ified code in VMS specific sources.
+
+A note on appending the redirected output. With this change, a simple mechanism
+is implemented to make ">>" work in action lines. In VMS there is no simple
+feature like ">>" to have DCL command or program output redirected and appended
+to a file. GNU make for VMS already implements the redirection of output. If
+such a redirection is detected, an ">" on the action line, GNU make creates a
+DCL command procedure to execute the action and to redirect its output. Based
+on that, now ">>" is also recognized and a similar but different command
+procedure is created to implement the append. The main idea here is to create a
+temporary file which collects the output and which is appended to the wanted
+output file. Then the temporary file is deleted. This is all done in the
+command procedure to keep changes in make small and simple. This obviously has
+some limitations but it seems good enough compared with the current ">"
+implementation. (And in my opinion, redirection is not really what GNU make has
+to do.) With this approach, it may happen that the temporary file is not yet
+appended and is left in SYS$SCRATCH. The temporary file names look like
+"CMDxxxxx.". Any time the created command procedure can not complete, this
+happens. Pressing Ctrl+Y to abort make is one case. In case of Ctrl+Y the
+associated command procedure is left in SYS$SCRATCH as well. Its name is
+CMDxxxxx.COM.
+
+Change in the Ctrl+Y handling. The CtrlY handler now uses $delprc to delete all
+children. This way also actions with DCL commands will be stopped. As before
+the CtrlY handler then sends SIGQUIT to itself, which is handled in common
+code.
+
+Change in deleteing temporary command files. Temporary command files are now
+deleted in the vms child termination handler. That deletes them even if
+a Ctrl+C was pressed.
+
+The behavior of pressing Ctrl+C is not changed. It still has only an effect,
+after the current action is terminated. If that doesn't happen or takes too
+long, Ctrl+Y should be used instead.
+
+Changes for GNU make 3.80
+
+. In default.c define variable ARCH as IA64 for VMS on Itanium systems.
+
+. In makefile.vms avoid name collision for glob and globfree.
+
+This is the VMS port of GNU Make done by Hartmut.Becker@compaq.com.
+
+It is based on the specific version 3.77k and on 3.78.1. 3.77k was done
+by Klaus Kämpf <kkaempf@rmi.de>, the code was based on the VMS port of
+GNU Make 3.60 by Mike Moretti.
+
+It was ported on OpenVMS/Alpha V7.1, DECC V5.7-006. It was re-build and
+tested on OpenVMS/Alpha V7.2, OpenVMS/VAX 7.1 and 5.5-2. Different
+versions of DECC were used. VAXC was tried: it fails; but it doesn't
+seem worth to get it working. There are still some PTRMISMATCH warnings
+during the compile. Although perl is working on VMS the test scripts
+don't work. The function $shell is still missing.
+
+There is a known bug in some of the VMS CRTLs. It is in the shipped
+versions of VMS V7.2 and V7.2-1 and in the currently (October 1999)
+available ECOs for VMS V7.1 and newer versions. It is fixed in versions
+shipped with newer VMS versions and all ECO kits after October 1999. It
+only shows up during the daylight saving time period (DST): stat()
+returns a modification time 1 hour ahead. This results in GNU make
+warning messages. For a just created source you will see:
+
+ $ gmake x.exe
+ gmake.exe;1: *** Warning: File 'x.c' has modification time in the future (940582863 > 940579269)
+ cc    /obj=x.obj x.c
+ link  x.obj    /exe=x.exe
+ gmake.exe;1: *** Warning:  Clock skew detected.  Your build may be incomplete.
+
+
+New in 3.78.1:
+
+Fix a problem with automatically remaking makefiles. GNU make uses an
+execve to restart itself after a successful remake of the makefile. On
+UNIX systems execve replaces the running program with a new one and
+resets all signal handling to the default. On VMS execve creates a child
+process, signal and exit handlers of the parent are still active, and,
+unfortunately, corrupt the exit code from the child. Fix in job.c:
+ignore SIGCHLD.
+
+Added some switches to reflect latest features of DECC. Modifications in
+makefile.vms.
+
+Set some definitions to reflect latest features of DECC. Modifications in
+config.h-vms (which is copied to config.h).
+
+Added extern strcmpi declaration to avoid 'implicitly declared' messages.
+Modification in make.h.
+
+Default rule for C++, conditionals for gcc (GCC_IS_NATIVE) or DEC/Digital/
+Compaq c/c++ compilers. Modifications in default.c.
+
+Usage of opendir() and friends, suppress file version. Modifications in dir.c.
+
+Added VMS specific code to handle ctrl+c and ctrl+y to abort make.
+Modifications in job.c.
+
+Added support to have case sensitive targets and dependencies but to
+still use case blind file names. This is especially useful for Java
+makefiles on VMS:
+
+	.SUFFIXES :
+	.SUFFIXES :	.class .java
+	.java.class :
+		javac "$<
+	HelloWorld.class :      HelloWorld.java
+
+A new macro WANT_CASE_SENSITIVE_TARGETS in config.h-vms was introduced.
+It needs to be enabled to get this feature; default is disabled.  The
+macro HAVE_CASE_INSENSITIVE_FS must not be touched: it is still enabled.
+Modifications in file.c and config.h-vms.
+
+Bootstrap make to start building make is still makefile.com, but make
+needs to be re-made with a make to make a correct version: ignore all
+possible warnings, delete all objects, rename make.exe to a different
+name and run it.
+
+Made some minor modifications to the bootstrap build makefile.com.
+
+This is the VMS port of GNU Make.
+
+It is based on the VMS port of GNU Make 3.60 by Mike Moretti.
+
+This port was done by Klaus Kämpf <kkaempf@rmi.de>
+
+There is first-level support available from proGIS Software, Germany.
+Visit their web-site at http://www.progis.de to get information
+about other vms software and forthcoming updates to gnu make.
+
+New for 3.77:
+
+/bin/sh style I/O redirection is supported. You can now write lines like
+	mcr sys$disk:[]program.exe < input.txt > output.txt &> error.txt
+
+Makefile variables are looked up in the current environment. You can set
+symbols or logicals in DCL and evaluate them in the Makefile via
+$(<name-of-symbol-or-logical>).  Variables defined in the Makefile
+override VMS symbols/logicals !
+
+Functions for file names are working now. See the GNU Make manual for
+$(dir ...)  and $(wildcard ...).  Unix-style and VMS-style names are
+supported as arguments.
+
+The default rules are set up for GNU C. Building an executable from a
+single source file is as easy as 'make file.exe'.
+
+The variable $(ARCH) is predefined as ALPHA or VAX resp. Makefiles for
+different VMS systems can now be written by checking $(ARCH) as in
+  ifeq ($(ARCH),ALPHA)
+    $(ECHO) "On the Alpha"
+  else
+    $(ECHO) "On the VAX"
+  endif
+
+Command lines of excessive length are correctly broken and written to a
+batch file in sys$scratch for later execution. There's no limit to the
+lengths of commands (and no need for .opt files :-) any more.
+
+Empty commands are handled correctly and don't end in a new DCL process.
+
+
+New for 3.76:
+
+John W. Eaton has updated the VMS port to support libraries and VPATH.
+
+
+To build Make, simply type @makefile.  This should compile all the
+necessary files and link Make.  There is also a file called
+makefile.vms.  If you already have GNU Make built you can just use
+Make with this makefile to rebuild.
+
+Here are some notes about GNU Make for VMS:
+
+The cd command is supported if it's called as $(CD). This invokes
+the 'builtin_cd' command which changes the directory.
+Calling 'set def' doesn't do the trick, since a sub-shell is
+spawned for this command, the directory is changed *in this sub-shell*
+and the sub-shell ends.
+
+Libraries are not supported. They were in GNU Make 3.60 but somehow I
+didn't care porting the code. If there is enough interest, I'll do it at
+some later time.
+
+The variable $^ separates files with commas instead of spaces (It's the
+natural thing to do for VMS).
+
+See defaults.c for VMS default suffixes and my definitions for default
+rules and variables.
+
+The shell function is not implemented yet.
+
+Load average routines haven't been implemented for VMS yet.
+
+The default include directory for including other makefiles is
+SYS$SYSROOT:[SYSLIB] (I don't remember why I didn't just use
+SYS$LIBRARY: instead; maybe it wouldn't work that way).
+
+The default makefiles make looks for are: makefile.vms, gnumakefile,
+makefile., and gnumakefile. .
+
+The stat() function and handling of time stamps in VMS is broken, so I
+replaced it with a hack in vmsfunctions.c. I will provide a full rewrite
+somewhere in the future. Be warned, the time resolution inside make is
+less than what vms provides. This might be a problem on the faster Alphas.
+
+You can use a : in a filename only if you precede it with a backslash ('\').
+E.g.- hobbes\:[bogas.files]
+
+Make ignores success, informational, or warning errors (-S-, -I-, or
+-W-).  But it will stop on -E- and -F- errors. (unless you do something
+to override this in your makefile, or whatever).
+
+Remote stuff isn't implemented yet.
+
+Multiple line DCL commands, such as "if" statements, must be put inside
+command files.  You can run a command file by using \@.
+
+
+VMS changes made for 3.74.3
+
+Lots of default settings are adapted for VMS. See default.c.
+
+Long command lines are now converted to command files.
+
+Comma (',') as a separator is now allowed. See makefile.vms for an example.
+
+-------------------------------------------------------------------------------
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.W32 b/README.W32
new file mode 100644
index 0000000..e52e406
--- /dev/null
+++ b/README.W32
@@ -0,0 +1,309 @@
+This version of GNU make has been tested on
+Microsoft Windows 2000/XP/2003/Vista/7/2008.
+It has also been used on Windows 95/98/NT, and on OS/2.
+
+It builds with the MinGW port of GCC (tested with GCC 3.4.2).
+
+It also builds with MSVC 2.x, 4.x, 5.x, 6.x, and 2003 as well as
+with .NET 7.x and .NET 2003.
+
+As of version 4.0, a build with Guile is supported (tested with Guile
+2.0.3).  To build with Guile, you will need, in addition to Guile
+itself, its dependency libraries and the pkg-config program.  The
+latter is used to figure out which compilation and link switches and
+libraries need to be mentioned on the compiler command lines to
+correctly link with Guile.  A Windows port of pkg-config can be found
+on the Windows download page of the GTK+ project:
+
+  http://www.gtk.org/download/win32.php
+
+The libraries on which Guile depends can vary depending on your
+version and build of Guile.  At the very least, the Boehm's GC library
+will be needed, and typically also GNU MP, libffi, libunistring, and
+libtool's libltdl.  Whoever built the port of Guile you have should
+also provide you with these dependencies or a URL where to download
+them.
+
+The Windows 32-bit port of GNU make is maintained jointly by various
+people.  It was originally made by Rob Tulloh.
+
+
+Do this first, regardless of the build method you choose:
+---------------------------------------------------------
+
+ 1. At the Windows command prompt run:
+
+      if not exist NMakefile copy NMakefile.template NMakefile
+      if not exist config.h copy config.h.W32 config.h
+
+    Then edit config.h to your liking (especially the few shell-related
+    defines near the end, or HAVE_CASE_INSENSITIVE_FS which corresponds
+    to './configure --enable-case-insensitive-file-system').
+
+
+Using make_msvc_net2003.vcproj
+------------------------------
+
+ 2. Open make_msvc_net2003.vcproj in MSVS71 or MSVC71 or any compatible IDE,
+    then build this project as usual.  There's also a solution file for
+    Studio 2003.
+
+
+Building with (MinGW-)GCC using build_w32.bat
+---------------------------------------------
+
+ 2. Open a W32 command prompt for your installed (MinGW-)GCC, setup a
+    correct PATH and other environment variables for it, then execute ...
+
+        build_w32.bat gcc
+
+    This produces gnumake.exe in the current directory.
+
+    The batch file will probe for Guile installation, and will build
+    gnumake.exe with Guile if it finds it.  If you have Guile
+    installed, but want to build Make without Guile support, type
+
+        build_w32.bat --without-guile gcc
+
+
+Building with (MSVC++-)cl using build_w32.bat or NMakefile
+----------------------------------------------------------
+
+ 2. Open a W32 command prompt for your installed (MSVC++-)cl, setup a
+    correct PATH and other environment variables for it (usually via
+    executing vcvars32.bat or vsvars32.bat from the cl-installation,
+    e.g. "%VS71COMNTOOLS%vsvars32.bat"; or using a corresponding start
+    menue entry from the cl-installation), then execute EITHER ...
+
+        build_w32.bat
+
+    (this produces WinDebug/gnumake.exe and WinRel/gnumake.exe)
+
+    ... OR ...
+
+        nmake /f NMakefile
+
+    (this produces WinDebug/make.exe and WinRel/make.exe).
+
+    The batch file will probe for Guile installation, and will build
+    gnumake.exe with Guile if it finds it.  If you have Guile
+    installed, but want to build Make without Guile support, type
+
+        build_w32.bat --without-guile
+
+-------------------
+-- Notes/Caveats --
+-------------------
+
+GNU make on Windows 32-bit platforms:
+
+        This version of make is ported natively to Windows32 platforms
+        (Windows NT 3.51, Windows NT 4.0, Windows 2000, Windows XP,
+        Windows 95, and Windows 98). It does not rely on any 3rd party
+        software or add-on packages for building. The only thing
+        needed is a Windows compiler.  Two compilers supported
+        officially are the MinGW port of GNU GCC, and the various
+        versions of the Microsoft C compiler.
+
+        Do not confuse this port of GNU make with other Windows32 projects
+        which provide a GNU make binary. These are separate projects
+        and are not connected to this port effort.
+
+GNU make and sh.exe:
+
+        This port prefers if you have a working sh.exe somewhere on
+        your system. If you don't have sh.exe, the port falls back to
+        MSDOS mode for launching programs (via a batch file).  The
+        MSDOS mode style execution has not been tested that carefully
+        though (The author uses GNU bash as sh.exe).
+
+        There are very few true ports of Bourne shell for NT right now.
+        There is a version of GNU bash available from Cygnus "Cygwin"
+        porting effort (http://www.cygwin.com/).
+        Other possibilities are the MKS version of sh.exe, or building
+        your own with a package like NutCracker (DataFocus) or Portage
+        (Consensys).  Also MinGW includes sh (http://mingw.org/).
+
+GNU make and brain-dead shells (BATCH_MODE_ONLY_SHELL):
+
+        Some versions of Bourne shell do not behave well when invoked
+        as 'sh -c' from CreateProcess().  The main problem is they seem
+        to have a hard time handling quoted strings correctly. This can
+        be circumvented by writing commands to be executed to a batch
+        file and then executing the command by calling 'sh file'.
+
+        To work around this difficulty, this version of make supports
+        a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
+        time, make forces all command lines to be executed via script
+        files instead of by command line.  In this mode you must have a
+        working sh.exe in order to use parallel builds (-j).
+
+        A native Windows32 system with no Bourne shell will also run
+        in batch mode.  All command lines will be put into batch files
+        and executed via $(COMSPEC) (%COMSPEC%).  However, parallel
+        builds ARE supported with Windows shells (cmd.exe and
+        command.com).  See the next section about some peculiarities
+        of parallel builds on Windows.
+
+Support for parallel builds
+
+        Parallel builds (-jN) are supported in this port, with 1
+        limitation: The number of concurrent processes has a hard
+        limit of 64, due to the way this port implements waiting for
+        its subprocesses.
+
+GNU make and Cygnus GNU Windows32 tools:
+
+        Good news! Make now has native support for Cygwin sh. To enable,
+        define the HAVE_CYGWIN_SHELL in config.h and rebuild make
+        from scratch. This version of make tested with B20.1 of Cygwin.
+        Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.
+
+GNU make and the MKS shell:
+
+        There is now semi-official support for the MKS shell. To turn this
+        support on, define HAVE_MKS_SHELL in the config.h.W32 before you
+        build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
+        on HAVE_MKS_SHELL.
+
+GNU make handling of drive letters in pathnames (PATH, vpath, VPATH):
+
+        There is a caveat that should be noted with respect to handling
+        single character pathnames on Windows systems.  When colon is
+        used in PATH variables, make tries to be smart about knowing when
+        you are using colon as a separator versus colon as a drive
+        letter.  Unfortunately, something as simple as the string 'x:/'
+        could be interpreted 2 ways: (x and /) or (x:/).
+
+        Make chooses to interpret a letter plus colon (e.g. x:/) as a
+        drive letter pathname.  If it is necessary to use single
+        character directories in paths (VPATH, vpath, Path, PATH), the
+        user must do one of two things:
+
+         a. Use semicolon as the separator to disambiguate colon. For
+            example use 'x;/' if you want to say 'x' and '/' are
+            separate components.
+
+         b. Qualify the directory name so that there is more than
+            one character in the path(s) used. For example, none
+            of these settings are ambiguous:
+
+              ./x:./y
+              /some/path/x:/some/path/y
+              x:/some/path/x:x:/some/path/y
+
+        Please note that you are free to mix colon and semi-colon in the
+        specification of paths.  Make is able to figure out the intended
+        result and convert the paths internally to the format needed
+        when interacting with the operating system, providing the path
+        is not within quotes, e.g. "x:/test/test.c".
+
+        You are encouraged to use colon as the separator character.
+        This should ease the pain of deciding how to handle various path
+        problems which exist between platforms.  If colon is used on
+        both Unix and Windows systems, then no ifdef'ing will be
+        necessary in the makefile source.
+
+GNU make test suite:
+
+        I verified all functionality with a slightly modified version
+        of make-test-4.1 (modifications to get test suite to run
+        on Windows NT). All tests pass in an environment that includes
+        sh.exe.  Tests were performed on both Windows NT and Windows 95.
+
+Pathnames and white space:
+
+        Unlike Unix, Windows 95/NT systems encourage pathnames which
+        contain white space (e.g. C:\Program Files\). These sorts of
+        pathnames are valid on Unix too, but are never encouraged.
+        There is at least one place in make (VPATH/vpath handling) where
+        paths containing white space will simply not work. There may be
+        others too. I chose to not try and port make in such a way so
+        that these sorts of paths could be handled. I offer these
+        suggestions as workarounds:
+
+                1. Use 8.3 notation. i.e. "x:/long~1/", which is actually
+                   "x:\longpathtest".  Type "dir /x" to view these filenames
+                   within the cmd.exe shell.
+                2. Rename the directory so it does not contain white space.
+
+        If you are unhappy with this choice, this is free software
+        and you are free to take a crack at making this work. The code
+        in w32/pathstuff.c and vpath.c would be the places to start.
+
+Pathnames and Case insensitivity:
+
+        Unlike Unix, Windows 95/NT systems are case insensitive but case
+        preserving.  For example if you tell the file system to create a
+        file named "Target", it will preserve the case.  Subsequent access to
+        the file with other case permutations will succeed (i.e. opening a
+        file named "target" or "TARGET" will open the file "Target").
+
+        By default, GNU make retains its case sensitivity when comparing
+        target names and existing files or directories.  It can be
+        configured, however, into a case preserving and case insensitive
+        mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
+        config.h.W32.
+
+        For example, the following makefile will create a file named
+        Target in the directory subdir which will subsequently be used
+        to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
+        Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
+        will not be made:
+
+        subdir/Target:
+                touch $@
+
+        SUBDIR/DepTarget: SubDir/TARGET
+                cp $^ $@
+
+        Reliance on this behavior also eliminates the ability of GNU make
+        to use case in comparison of matching rules.  For example, it is
+        not possible to set up a C++ rule using %.C that is different
+        than a C rule using %.c.  GNU make will consider these to be the
+        same rule and will issue a warning.
+
+SAMBA/NTFS/VFAT:
+
+        I have not had any success building the debug version of this
+        package using SAMBA as my file server. The reason seems to be
+        related to the way VC++ 4.0 changes the case name of the pdb
+        filename it is passed on the command line. It seems to change
+        the name always to to lower case. I contend that the VC++
+        compiler should not change the casename of files that are passed
+        as arguments on the command line. I don't think this was a
+        problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.
+
+        The package builds fine on VFAT and NTFS filesystems.
+
+        Most all of the development I have done to date has been using
+        NTFS and long file names. I have not done any considerable work
+        under VFAT. VFAT users may wish to be aware that this port of
+        make does respect case sensitivity.
+
+FAT:
+
+        Version 3.76 added support for FAT filesystems. Make works
+        around some difficulties with stat'ing of files and caching of
+        filenames and directories internally.
+
+Bug reports:
+
+        Please submit bugs via the normal bug reporting mechanism which
+        is described in the GNU make manual and the base README.
+
+-------------------------------------------------------------------------------
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/README.customs b/README.customs
new file mode 100644
index 0000000..30d98ac
--- /dev/null
+++ b/README.customs
@@ -0,0 +1,112 @@
+                                                            -*-indented-text-*-
+
+GNU make can utilize the Customs library, distributed with Pmake, to
+provide builds distributed across multiple hosts.
+
+In order to utilize this capability, you must first download and build
+the Customs library.  It is contained in the Pmake distribution, which
+can be obtained at:
+
+  ftp://ftp.icsi.berkeley.edu/pub/ai/stolcke/software/
+
+This integration was tested (superficially) with Pmake 2.1.33.
+
+
+BUILDING CUSTOMS
+----------------
+
+First, build pmake and Customs.  You need to build pmake first, because
+Customs require pmake to build.  Unfortunately, this is not trivial;
+please see the pmake and Customs documentation for details.  The best
+place to look for instructions is in the pmake-2.1.33/INSTALL file.
+
+Note that the 2.1.33 Pmake distribution comes with a set of patches to
+GNU make, distributed in the pmake-2.1.33/etc/gnumake/ directory.  These
+patches are based on GNU make 3.75 (there are patches for earlier
+versions of GNU make, also).  The parts of this patchfile which relate
+directly to Customs support have already been incorporated into this
+version of GNU make, so you should _NOT_ apply the patch file.
+
+However, there are a few non-Customs specific (as far as I could tell)
+changes here which are not incorporated (for example, the modification
+to try expanding -lfoo to libfoo.so).  If you rely on these changes
+you'll need to re-apply them by hand.
+
+Install the Customs library and header files according to the
+documentation.  You should also install the man pages (contrary to
+comments in the documentation, they weren't installed automatically for
+me; I had to cd to the 'pmake-2.1.33/doc' directory and run 'pmake
+install' there directly).
+
+
+BUILDING GNU MAKE
+-----------------
+
+Once you've installed Customs, you can build GNU make to use it.  When
+configuring GNU make, merely use the '--with-customs=DIR' option.
+Provide the directory containing the 'lib' and 'include/customs'
+subdirectories as DIR.  For example, if you installed the customs
+library in /usr/local/lib and the headers in /usr/local/include/customs,
+then you'd pass '--with-customs=/usr/local' as an option to configure.
+
+Run make (or use build.sh) normally to build GNU make as described in
+the INSTALL file.
+
+See the documentation for Customs for information on starting and
+configuring Customs.
+
+
+INVOKING CUSTOMS-IZED GNU MAKE
+-----------------------------
+
+One thing you should be aware of is that the default build environment
+for Customs requires root permissions.  Practically, this means that GNU
+make must be installed setuid root to use Customs.
+
+If you don't want to do this, you can build Customs such that root
+permissions are not necessary.  Andreas Stolcke <stolcke@speech.sri.com>
+writes:
+
+ > pmake, gnumake or any other customs client program is not required to
+ > be suid root if customs was compiled WITHOUT the USE_RESERVED_PORTS
+ > option in customs/config.h.  Make sure the "customs" service in
+ > /etc/services is defined accordingly (port 8231 instead of 1001).
+
+ > Not using USE_RESERVED_PORTS means that a user with programming
+ > skills could impersonate another user by writing a fake customs
+ > client that pretends to be someone other than himself.  See the
+ > discussion in etc/SECURITY.
+
+
+PROBLEMS
+--------
+
+SunOS 4.1.x:
+  The customs/sprite.h header file #includes the <malloc.h> header
+  files; this conflicts with GNU make's configuration so you'll get a
+  compile error if you use GCC (or any other ANSI-capable C compiler).
+
+  I commented out the #include in sprite.h:107:
+
+    #if defined(sun) || defined(ultrix) || defined(hpux) || defined(sgi)
+    /* #include <malloc.h> */
+    #else
+
+  YMMV.
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 1998-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/SCOPTIONS b/SCOPTIONS
new file mode 100644
index 0000000..f89daae
--- /dev/null
+++ b/SCOPTIONS
@@ -0,0 +1,13 @@
+ERRORREXX
+OPTIMIZE
+NOVERSION
+OPTIMIZERTIME
+OPTIMIZERALIAS
+DEFINE INCLUDEDIR="include:"
+DEFINE LIBDIR="lib:"
+DEFINE NO_ALLOCA
+DEFINE NO_FLOAT
+DEFINE NO_ARCHIVES
+IGNORE=161
+IGNORE=100
+STARTUP=cres
diff --git a/SMakefile b/SMakefile
new file mode 100644
index 0000000..2b55f22
--- /dev/null
+++ b/SMakefile
@@ -0,0 +1,449 @@
+# -*-Makefile-*- for building GNU make with smake
+#
+# NOTE: If you have no 'make' program at all to process this makefile,
+# run 'build.sh' instead.
+#
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+#	Makefile for GNU Make
+#
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /make-4.1/
+# This must repeat the value, because configure will remove 'VPATH = .'.
+srcdir = /make-4.1/
+
+CC = sc
+RM = delete
+MAKE = smake
+
+CFLAGS =
+CPPFLAGS =
+LDFLAGS =
+
+# Define these for your system as follows:
+#	-DNO_ARCHIVES		To disable 'ar' archive support.
+#	-DNO_FLOAT		To avoid using floating-point numbers.
+#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
+#				Some compilers apparently accept this
+#				without complaint but produce losing code,
+#				so beware.
+# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
+# See also 'config.h'.
+defines =
+
+# Which flavor of remote job execution support to use.
+# The code is found in 'remote-$(REMOTE).c'.
+REMOTE = stub
+
+# If you are using the GNU C library, or have the GNU getopt functions in
+# your C library, you can comment these out.
+GETOPT = getopt.o getopt1.o
+GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
+
+# If you are using the GNU C library, or have the GNU glob functions in
+# your C library, you can comment this out.  GNU make uses special hooks
+# into the glob functions to be more efficient (by using make's directory
+# cache for globbing), so you must use the GNU functions even if your
+# system's C library has the 1003.2 glob functions already.  Also, the glob
+# functions in the AIX and HPUX C libraries are said to be buggy.
+GLOB = Lib glob/glob.lib
+
+# If your system doesn't have alloca, or the one provided is bad, define this.
+ALLOCA = alloca.o
+ALLOCA_SRC = $(srcdir)alloca.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
+# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
+# alloca.c instead on those machines.
+LOADLIBES =
+
+# Any extra object files your system needs.
+extras = amiga.o
+
+# Common prefix for machine-independent installed files.
+prefix =
+# Common prefix for machine-dependent installed files.
+exec_prefix =
+
+# Directory to install 'make' in.
+bindir = sc:c
+# Directory to find libraries in for '-lXXX'.
+libdir = lib:
+# Directory to search by default for included makefiles.
+includedir = include:
+# Directory to install the Info files in.
+infodir = doc:
+# Directory to install the man page in.
+mandir = t:
+# Number to put on the man page filename.
+manext = 1
+# Prefix to put on installed 'make' binary file name.
+binprefix =
+# Prefix to put on installed 'make' man page file name.
+manprefix = $(binprefix)
+
+# Whether or not make needs to be installed setgid.
+# The value should be either 'true' or 'false'.
+# On many systems, the getloadavg function (used to implement the '-l'
+# switch) will not work unless make is installed setgid kmem.
+install_setgid = false
+# Install make setgid to this group so it can read /dev/kmem.
+group = sys
+
+# Program to install 'make'.
+INSTALL_PROGRAM = copy
+# Program to install the man page.
+INSTALL_DATA = copy
+# Generic install program.
+INSTALL = copy
+
+# Program to format Texinfo source into Info files.
+MAKEINFO = makeinfo
+# Program to format Texinfo source into DVI files.
+TEXI2DVI = texi2dvi
+
+# Programs to make tags files.
+ETAGS = etags -w
+CTAGS = ctags -w
+
+#guile = guile.o
+
+objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o   \
+       rule.o implicit.o default.o variable.o expand.o function.o    \
+       vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o   \
+       output.o remote-$(REMOTE).o $(GLOB) $(GETOPT) $(ALLOCA)       \
+       $(extras) $(guile)
+
+srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
+       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
+       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
+       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
+       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
+       $(srcdir)vpath.c $(srcdir)version.c $(srcdir)hash.c           \
+       $(srcdir)guile.c $(srcdir)remote-$(REMOTE).c                  \
+       $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c           \
+       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)           \
+       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h            \
+       $(srcdir)job.h $(srcdir)makeint.h $(srcdir)rule.h             \
+       $(srcdir)output.c $(srcdir)output.h                           \
+       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
+
+
+.SUFFIXES:
+.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
+
+all: make
+info: make.info
+dvi: make.dvi
+# Some makes apparently use .PHONY as the default goal if it is before 'all'.
+.PHONY: all check info dvi
+
+make.info: make.texinfo
+	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
+
+make.dvi: make.texinfo
+	$(TEXI2DVI) $(srcdir)make.texinfo
+
+make.ps: make.dvi
+	dvi2ps make.dvi > make.ps
+
+make: $(objs) glob/glob.lib
+	$(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new
+	-delete quiet make
+	rename make.new make
+
+# -I. is needed to find config.h in the build directory.
+.c.o:
+	$(CC) $(defines) IDir "" IDir $(srcdir)glob \
+	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+glob/glob.lib:
+	execute <<
+	    cd glob
+	    smake
+<
+
+tagsrcs = $(srcs) $(srcdir)remote-*.c
+TAGS: $(tagsrcs)
+	$(ETAGS) $(tagsrcs)
+tags: $(tagsrcs)
+	$(CTAGS) $(tagsrcs)
+
+.PHONY: install installdirs
+install:
+	copy make sc:c
+
+loadavg: loadavg.c config.h
+	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
+	      loadavg.c $(LOADLIBES) -o $@
+
+clean: glob-clean
+	-$(RM) -f make loadavg *.o core make.dvi
+
+distclean: clean glob-realclean
+	-$(RM) -f Makefile config.h config.status build.sh
+	-$(RM) -f config.log config.cache
+	-$(RM) -f TAGS tags
+	-$(RM) -f make.?? make.??s make.log make.toc make.*aux
+	-$(RM) -f loadavg.c
+
+realclean: distclean
+	-$(RM) -f make.info*
+
+mostlyclean: clean
+
+.PHONY: glob-clean glob-realclean
+
+glob-clean glob-realclean:
+	execute <<
+	cd glob
+	smake $@
+<
+
+# --------------- DEPENDENCIES
+#
+
+# .deps/alloca.Po
+# dummy
+
+# .deps/ar.Po
+ar.o: ar.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+
+# .deps/arscan.Po
+arscan.o: arscan.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/commands.Po
+commands.o: commands.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h
+
+# .deps/default.Po
+default.o: default.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h variable.h rule.h dep.h job.h output.h \
+ commands.h
+
+# .deps/dir.Po
+dir.o: dir.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h filedef.h dep.h \
+
+# .deps/expand.Po
+expand.o: expand.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/file.Po
+file.o: file.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h \
+ debug.h
+
+# .deps/function.Po
+function.o: function.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h job.h output.h \
+ commands.h debug.h
+
+# .deps/getloadavg.Po
+# dummy
+
+# .deps/getopt.Po
+getopt.o: getopt.c config.h \
+
+# .deps/getopt1.Po
+getopt1.o: getopt1.c config.h getopt.h \
+
+# .deps/guile.Po
+guile.o: guile.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ dep.h variable.h \
+ gmk-default.h
+
+# .deps/hash.Po
+hash.o: hash.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/implicit.Po
+implicit.o: implicit.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h rule.h \
+ dep.h debug.h variable.h job.h output.h \
+ commands.h
+
+# .deps/job.Po
+job.o: job.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+ debug.h filedef.h hash.h \
+ commands.h variable.h
+
+# .deps/load.Po
+load.o: load.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ debug.h filedef.h hash.h \
+ variable.h
+
+# .deps/loadapi.Po
+loadapi.o: loadapi.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h dep.h
+
+# .deps/loadavg-getloadavg.Po
+# dummy
+
+# .deps/main.Po
+main.o: main.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ variable.h job.h output.h \
+ commands.h rule.h debug.h \
+ getopt.h
+
+# .deps/misc.Po
+misc.o: misc.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h \
+ debug.h \
+
+# .deps/output.Po
+output.o: output.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ job.h output.h \
+
+# .deps/read.Po
+read.o: read.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h \
+ debug.h
+
+# .deps/remake.Po
+remake.o: remake.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h dep.h variable.h \
+ debug.h
+
+# .deps/remote-cstms.Po
+# dummy
+
+# .deps/remote-stub.Po
+remote-stub.o: remote-stub.c makeint.h \
+ config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h job.h \
+ output.h \
+ commands.h
+
+# .deps/rule.Po
+rule.o: rule.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/signame.Po
+signame.o: signame.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+
+# .deps/strcache.Po
+strcache.o: strcache.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ hash.h
+
+# .deps/variable.Po
+variable.o: variable.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h dep.h job.h output.h \
+ commands.h variable.h rule.h
+
+# .deps/version.Po
+version.o: version.c config.h
+
+# .deps/vmsjobs.Po
+# dummy
+
+# .deps/vpath.Po
+vpath.o: vpath.c makeint.h config.h \
+ gnumake.h \
+ getopt.h \
+ gettext.h \
+ filedef.h hash.h \
+ variable.h
diff --git a/acinclude.m4 b/acinclude.m4
new file mode 100644
index 0000000..53d7ef1
--- /dev/null
+++ b/acinclude.m4
@@ -0,0 +1,132 @@
+dnl acinclude.m4 -- Extra macros needed for GNU make.
+dnl
+dnl Automake will incorporate this into its generated aclocal.m4.
+dnl Copyright (C) 1998-2014 Free Software Foundation, Inc.
+dnl This file is part of GNU Make.
+dnl
+dnl GNU Make is free software; you can redistribute it and/or modify it under
+dnl the terms of the GNU General Public License as published by the Free
+dnl Software Foundation; either version 3 of the License, or (at your option)
+dnl any later version.
+dnl
+dnl GNU Make is distributed in the hope that it will be useful, but WITHOUT
+dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+dnl FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.
+dnl more details.
+dnl
+dnl You should have received a copy of the GNU General Public License along
+dnl with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+dnl ---------------------------------------------------------------------------
+dnl Got this from the lynx 2.8 distribution.
+dnl by T.E.Dickey <dickey@clark.net>
+dnl and Jim Spath <jspath@mail.bcpl.lib.md.us>
+dnl and Philippe De Muyter <phdm@macqel.be>
+dnl
+dnl Created: 1997/1/28
+dnl Updated: 1997/12/23
+dnl ---------------------------------------------------------------------------
+dnl After checking for functions in the default $LIBS, make a further check
+dnl for the functions that are netlib-related (these aren't always in the
+dnl libc, etc., and have to be handled specially because there are conflicting
+dnl and broken implementations.
+dnl Common library requirements (in order):
+dnl	-lresolv -lsocket -lnsl
+dnl	-lnsl -lsocket
+dnl	-lsocket
+dnl	-lbsd
+AC_DEFUN([CF_NETLIBS],[
+cf_test_netlibs=no
+AC_MSG_CHECKING(for network libraries)
+AC_CACHE_VAL(cf_cv_netlibs,[
+AC_MSG_RESULT(working...)
+cf_cv_netlibs=""
+cf_test_netlibs=yes
+AC_CHECK_FUNCS(gethostname,,[
+	CF_RECHECK_FUNC(gethostname,nsl,cf_cv_netlibs,[
+		CF_RECHECK_FUNC(gethostname,socket,cf_cv_netlibs)])])
+#
+# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
+# I don't know the entrypoints - 97/7/22 TD
+AC_CHECK_LIB(inet,main,cf_cv_netlibs="-linet $cf_cv_netlibs")
+#
+if test "$ac_cv_func_lsocket" != no ; then
+AC_CHECK_FUNCS(socket,,[
+	CF_RECHECK_FUNC(socket,socket,cf_cv_netlibs,[
+		CF_RECHECK_FUNC(socket,bsd,cf_cv_netlibs)])])
+fi
+#
+AC_CHECK_FUNCS(gethostbyname,,[
+	CF_RECHECK_FUNC(gethostbyname,nsl,cf_cv_netlibs)])
+])
+LIBS="$LIBS $cf_cv_netlibs"
+test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&AC_FD_MSG
+])dnl
+dnl ---------------------------------------------------------------------------
+dnl Re-check on a function to see if we can pick it up by adding a library.
+dnl	$1 = function to check
+dnl	$2 = library to check in
+dnl	$3 = environment to update (e.g., $LIBS)
+dnl	$4 = what to do if this fails
+dnl
+dnl This uses 'unset' if the shell happens to support it, but leaves the
+dnl configuration variable set to 'unknown' if not.  This is a little better
+dnl than the normal autoconf test, which gives misleading results if a test
+dnl for the function is made (e.g., with AC_CHECK_FUNC) after this macro is
+dnl used (autoconf does not distinguish between a null token and one that is
+dnl set to 'no').
+AC_DEFUN([CF_RECHECK_FUNC],[
+AC_CHECK_LIB($2,$1,[
+	CF_UPPER(cf_tr_func,$1)
+	AC_DEFINE_UNQUOTED(HAVE_$cf_tr_func,1,[Define if you have function $1])
+	ac_cv_func_$1=yes
+	$3="-l$2 [$]$3"],[
+	ac_cv_func_$1=unknown
+	unset ac_cv_func_$1 2>/dev/null
+	$4],
+	[[$]$3])
+])dnl
+dnl ---------------------------------------------------------------------------
+dnl Make an uppercase version of a variable
+dnl $1=uppercase($2)
+AC_DEFUN([CF_UPPER],
+[
+changequote(,)dnl
+$1=`echo $2 | tr '[a-z]' '[A-Z]'`
+changequote([,])dnl
+])dnl
+
+
+dnl ---------------------------------------------------------------------------
+dnl From Paul Eggert <eggert@twinsun.com>
+dnl Update for Darwin by Troy Runkel <Troy.Runkel@mathworks.com>
+dnl Update for AIX by Olexiy Buyanskyy (Savannah bug 32485)
+
+AC_DEFUN([AC_STRUCT_ST_MTIM_NSEC],
+ [AC_CACHE_CHECK([for nanoseconds field of struct stat],
+   ac_cv_struct_st_mtim_nsec,
+   [ac_save_CPPFLAGS="$CPPFLAGS"
+    ac_cv_struct_st_mtim_nsec=no
+    # st_mtim.tv_nsec -- the usual case
+    # st_mtim._tv_nsec -- Solaris 2.6, if
+    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
+    #	 && !defined __EXTENSIONS__)
+    # st_mtim.st__tim.tv_nsec -- UnixWare 2.1.2
+    # st_mtime_n -- AIX 5.2 and above
+    # st_mtimespec.tv_nsec -- Darwin (Mac OSX)
+    for ac_val in st_mtim.tv_nsec st_mtim._tv_nsec st_mtim.st__tim.tv_nsec st_mtime_n st_mtimespec.tv_nsec; do
+      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
+      AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/stat.h>
+	], [struct stat s; s.ST_MTIM_NSEC;],
+        [ac_cv_struct_st_mtim_nsec=$ac_val; break])
+    done
+    CPPFLAGS="$ac_save_CPPFLAGS"
+   ])
+
+  if test $ac_cv_struct_st_mtim_nsec != no; then
+    AC_DEFINE_UNQUOTED([ST_MTIM_NSEC], [$ac_cv_struct_st_mtim_nsec],
+	[Define if struct stat contains a nanoseconds field])
+  fi
+ ]
+)
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..98f09b6
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1435 @@
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.14'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.14.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed.  If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+  [AC_LANG_PUSH([C])
+   am_cv_ar_interface=ar
+   AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+     [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([am_ar_try])
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+        AC_TRY_EVAL([am_ar_try])
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+     ])
+   AC_LANG_POP([C])])
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  m4_default([$1],
+             [AC_MSG_ERROR([could not determine $AR interface])])
+  ;;
+esac
+AC_SUBST([AR])dnl
+])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([AM_WITH_DMALLOC],
+[AC_MSG_CHECKING([if malloc debugging is wanted])
+AC_ARG_WITH([dmalloc],
+[AS_HELP_STRING([--with-dmalloc],
+                [use dmalloc, as in http://www.dmalloc.com])],
+[if test "$withval" = yes; then
+  AC_MSG_RESULT([yes])
+  AC_DEFINE([WITH_DMALLOC], [1],
+	    [Define if using the dmalloc debugging malloc package])
+  LIBS="$LIBS -ldmalloc"
+  LDFLAGS="$LDFLAGS -g"
+else
+  AC_MSG_RESULT([no])
+fi], [AC_MSG_RESULT([no])])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for 'mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl FIXME we are no longer going to remove this! adjust warning
+dnl FIXME message accordingly.
+AC_DIAGNOSE([obsolete],
+[$0: this macro is deprecated, and will soon be removed.
+You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead,
+and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.])
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([config/dospaths.m4])
+m4_include([config/gettext.m4])
+m4_include([config/iconv.m4])
+m4_include([config/intlmacosx.m4])
+m4_include([config/lib-ld.m4])
+m4_include([config/lib-link.m4])
+m4_include([config/lib-prefix.m4])
+m4_include([config/nls.m4])
+m4_include([config/po.m4])
+m4_include([config/progtest.m4])
+m4_include([acinclude.m4])
diff --git a/alloca.c b/alloca.c
new file mode 100644
index 0000000..02ac921
--- /dev/null
+++ b/alloca.c
@@ -0,0 +1,503 @@
+/* alloca.c -- allocate automatically reclaimed memory
+   (Mostly) portable public-domain implementation -- D A Gwyn
+
+   This implementation of the PWB library alloca function,
+   which is used to allocate space off the run-time stack so
+   that it is automatically reclaimed upon procedure exit,
+   was inspired by discussions with J. Q. Johnson of Cornell.
+   J.Otto Tennant <jot@cray.com> contributed the Cray support.
+
+   There are some preprocessor constants that can
+   be defined when compiling for your specific system, for
+   improved efficiency; however, the defaults should be okay.
+
+   The general concept of this implementation is to keep
+   track of all alloca-allocated blocks, and reclaim any
+   that are found to be deeper in the stack than the current
+   invocation.  This heuristic does not reclaim storage as
+   soon as it becomes invalid, but it will do so eventually.
+
+   As a special case, alloca(0) reclaims storage without
+   allocating any.  It is a good idea to use alloca(0) in
+   your main control loop, etc. to force garbage collection.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#ifdef emacs
+#include "blockinput.h"
+#endif
+
+/* If compiling with GCC 2, this file's not needed.  */
+#if !defined (__GNUC__) || __GNUC__ < 2
+
+/* If someone has defined alloca as a macro,
+   there must be some other way alloca is supposed to work.  */
+#ifndef alloca
+
+#ifdef emacs
+#ifdef static
+/* actually, only want this if static is defined as ""
+   -- this is for usg, in which emacs must undefine static
+   in order to make unexec workable
+   */
+#ifndef STACK_DIRECTION
+you
+lose
+-- must know STACK_DIRECTION at compile-time
+#endif /* STACK_DIRECTION undefined */
+#endif /* static */
+#endif /* emacs */
+
+/* If your stack is a linked list of frames, you have to
+   provide an "address metric" ADDRESS_FUNCTION macro.  */
+
+#if defined (CRAY) && defined (CRAY_STACKSEG_END)
+long i00afunc ();
+#define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
+#else
+#define ADDRESS_FUNCTION(arg) &(arg)
+#endif
+
+#if __STDC__
+typedef void *pointer;
+#else
+typedef char *pointer;
+#endif
+
+#ifndef NULL
+#define	NULL	0
+#endif
+
+/* Different portions of Emacs need to call different versions of
+   malloc.  The Emacs executable needs alloca to call xmalloc, because
+   ordinary malloc isn't protected from input signals.  On the other
+   hand, the utilities in lib-src need alloca to call malloc; some of
+   them are very simple, and don't have an xmalloc routine.
+
+   Non-Emacs programs expect this to call use xmalloc.
+
+   Callers below should use malloc.  */
+
+#ifndef emacs
+#define malloc xmalloc
+#endif
+extern pointer malloc ();
+
+/* Define STACK_DIRECTION if you know the direction of stack
+   growth for your system; otherwise it will be automatically
+   deduced at run-time.
+
+   STACK_DIRECTION > 0 => grows toward higher addresses
+   STACK_DIRECTION < 0 => grows toward lower addresses
+   STACK_DIRECTION = 0 => direction of growth unknown  */
+
+#ifndef STACK_DIRECTION
+#define	STACK_DIRECTION	0	/* Direction unknown.  */
+#endif
+
+#if STACK_DIRECTION != 0
+
+#define	STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
+
+#else /* STACK_DIRECTION == 0; need run-time code.  */
+
+static int stack_dir;		/* 1 or -1 once known.  */
+#define	STACK_DIR	stack_dir
+
+static void
+find_stack_direction (void)
+{
+  static char *addr = NULL;	/* Address of first 'dummy', once known.  */
+  auto char dummy;		/* To get stack address.  */
+
+  if (addr == NULL)
+    {				/* Initial entry.  */
+      addr = ADDRESS_FUNCTION (dummy);
+
+      find_stack_direction ();	/* Recurse once.  */
+    }
+  else
+    {
+      /* Second entry.  */
+      if (ADDRESS_FUNCTION (dummy) > addr)
+	stack_dir = 1;		/* Stack grew upward.  */
+      else
+	stack_dir = -1;		/* Stack grew downward.  */
+    }
+}
+
+#endif /* STACK_DIRECTION == 0 */
+
+/* An "alloca header" is used to:
+   (a) chain together all alloca'ed blocks;
+   (b) keep track of stack depth.
+
+   It is very important that sizeof(header) agree with malloc
+   alignment chunk size.  The following default should work okay.  */
+
+#ifndef	ALIGN_SIZE
+#define	ALIGN_SIZE	sizeof(double)
+#endif
+
+typedef union hdr
+{
+  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
+  struct
+    {
+      union hdr *next;		/* For chaining headers.  */
+      char *deep;		/* For stack depth measure.  */
+    } h;
+} header;
+
+static header *last_alloca_header = NULL;	/* -> last alloca header.  */
+
+/* Return a pointer to at least SIZE bytes of storage,
+   which will be automatically reclaimed upon exit from
+   the procedure that called alloca.  Originally, this space
+   was supposed to be taken from the current stack frame of the
+   caller, but that method cannot be made to work for some
+   implementations of C, for example under Gould's UTX/32.  */
+
+pointer
+alloca (unsigned size)
+{
+  auto char probe;		/* Probes stack depth: */
+  register char *depth = ADDRESS_FUNCTION (probe);
+
+#if STACK_DIRECTION == 0
+  if (STACK_DIR == 0)		/* Unknown growth direction.  */
+    find_stack_direction ();
+#endif
+
+  /* Reclaim garbage, defined as all alloca'd storage that
+     was allocated from deeper in the stack than currently.  */
+
+  {
+    register header *hp;	/* Traverses linked list.  */
+
+#ifdef emacs
+    BLOCK_INPUT;
+#endif
+
+    for (hp = last_alloca_header; hp != NULL;)
+      if ((STACK_DIR > 0 && hp->h.deep > depth)
+	  || (STACK_DIR < 0 && hp->h.deep < depth))
+	{
+	  register header *np = hp->h.next;
+
+	  free ((pointer) hp);	/* Collect garbage.  */
+
+	  hp = np;		/* -> next header.  */
+	}
+      else
+	break;			/* Rest are not deeper.  */
+
+    last_alloca_header = hp;	/* -> last valid storage.  */
+
+#ifdef emacs
+    UNBLOCK_INPUT;
+#endif
+  }
+
+  if (size == 0)
+    return NULL;		/* No allocation required.  */
+
+  /* Allocate combined header + user data storage.  */
+
+  {
+    register pointer new = malloc (sizeof (header) + size);
+    /* Address of header.  */
+
+    if (new == 0)
+      abort();
+
+    ((header *) new)->h.next = last_alloca_header;
+    ((header *) new)->h.deep = depth;
+
+    last_alloca_header = (header *) new;
+
+    /* User storage begins just after header.  */
+
+    return (pointer) ((char *) new + sizeof (header));
+  }
+}
+
+#if defined (CRAY) && defined (CRAY_STACKSEG_END)
+
+#ifdef DEBUG_I00AFUNC
+#include <stdio.h>
+#endif
+
+#ifndef CRAY_STACK
+#define CRAY_STACK
+#ifndef CRAY2
+/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
+struct stack_control_header
+  {
+    long shgrow:32;		/* Number of times stack has grown.  */
+    long shaseg:32;		/* Size of increments to stack.  */
+    long shhwm:32;		/* High water mark of stack.  */
+    long shsize:32;		/* Current size of stack (all segments).  */
+  };
+
+/* The stack segment linkage control information occurs at
+   the high-address end of a stack segment.  (The stack
+   grows from low addresses to high addresses.)  The initial
+   part of the stack segment linkage control information is
+   0200 (octal) words.  This provides for register storage
+   for the routine which overflows the stack.  */
+
+struct stack_segment_linkage
+  {
+    long ss[0200];		/* 0200 overflow words.  */
+    long sssize:32;		/* Number of words in this segment.  */
+    long ssbase:32;		/* Offset to stack base.  */
+    long:32;
+    long sspseg:32;		/* Offset to linkage control of previous
+				   segment of stack.  */
+    long:32;
+    long sstcpt:32;		/* Pointer to task common address block.  */
+    long sscsnm;		/* Private control structure number for
+				   microtasking.  */
+    long ssusr1;		/* Reserved for user.  */
+    long ssusr2;		/* Reserved for user.  */
+    long sstpid;		/* Process ID for pid based multi-tasking.  */
+    long ssgvup;		/* Pointer to multitasking thread giveup.  */
+    long sscray[7];		/* Reserved for Cray Research.  */
+    long ssa0;
+    long ssa1;
+    long ssa2;
+    long ssa3;
+    long ssa4;
+    long ssa5;
+    long ssa6;
+    long ssa7;
+    long sss0;
+    long sss1;
+    long sss2;
+    long sss3;
+    long sss4;
+    long sss5;
+    long sss6;
+    long sss7;
+  };
+
+#else /* CRAY2 */
+/* The following structure defines the vector of words
+   returned by the STKSTAT library routine.  */
+struct stk_stat
+  {
+    long now;			/* Current total stack size.  */
+    long maxc;			/* Amount of contiguous space which would
+				   be required to satisfy the maximum
+				   stack demand to date.  */
+    long high_water;		/* Stack high-water mark.  */
+    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
+    long hits;			/* Number of internal buffer hits.  */
+    long extends;		/* Number of block extensions.  */
+    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
+    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
+    long stko_free;		/* Number of deallocations by $STKRETN.  */
+    long stkm_free;		/* Number of deallocations by $STKMRET.  */
+    long segments;		/* Current number of stack segments.  */
+    long maxs;			/* Maximum number of stack segments so far.  */
+    long pad_size;		/* Stack pad size.  */
+    long current_address;	/* Current stack segment address.  */
+    long current_size;		/* Current stack segment size.  This
+				   number is actually corrupted by STKSTAT to
+				   include the fifteen word trailer area.  */
+    long initial_address;	/* Address of initial segment.  */
+    long initial_size;		/* Size of initial segment.  */
+  };
+
+/* The following structure describes the data structure which trails
+   any stack segment.  I think that the description in 'asdef' is
+   out of date.  I only describe the parts that I am sure about.  */
+
+struct stk_trailer
+  {
+    long this_address;		/* Address of this block.  */
+    long this_size;		/* Size of this block (does not include
+				   this trailer).  */
+    long unknown2;
+    long unknown3;
+    long link;			/* Address of trailer block of previous
+				   segment.  */
+    long unknown5;
+    long unknown6;
+    long unknown7;
+    long unknown8;
+    long unknown9;
+    long unknown10;
+    long unknown11;
+    long unknown12;
+    long unknown13;
+    long unknown14;
+  };
+
+#endif /* CRAY2 */
+#endif /* not CRAY_STACK */
+
+#ifdef CRAY2
+/* Determine a "stack measure" for an arbitrary ADDRESS.
+   I doubt that "lint" will like this much.  */
+
+static long
+i00afunc (long *address)
+{
+  struct stk_stat status;
+  struct stk_trailer *trailer;
+  long *block, size;
+  long result = 0;
+
+  /* We want to iterate through all of the segments.  The first
+     step is to get the stack status structure.  We could do this
+     more quickly and more directly, perhaps, by referencing the
+     $LM00 common block, but I know that this works.  */
+
+  STKSTAT (&status);
+
+  /* Set up the iteration.  */
+
+  trailer = (struct stk_trailer *) (status.current_address
+				    + status.current_size
+				    - 15);
+
+  /* There must be at least one stack segment.  Therefore it is
+     a fatal error if "trailer" is null.  */
+
+  if (trailer == 0)
+    abort ();
+
+  /* Discard segments that do not contain our argument address.  */
+
+  while (trailer != 0)
+    {
+      block = (long *) trailer->this_address;
+      size = trailer->this_size;
+      if (block == 0 || size == 0)
+	abort ();
+      trailer = (struct stk_trailer *) trailer->link;
+      if ((block <= address) && (address < (block + size)))
+	break;
+    }
+
+  /* Set the result to the offset in this segment and add the sizes
+     of all predecessor segments.  */
+
+  result = address - block;
+
+  if (trailer == 0)
+    {
+      return result;
+    }
+
+  do
+    {
+      if (trailer->this_size <= 0)
+	abort ();
+      result += trailer->this_size;
+      trailer = (struct stk_trailer *) trailer->link;
+    }
+  while (trailer != 0);
+
+  /* We are done.  Note that if you present a bogus address (one
+     not in any segment), you will get a different number back, formed
+     from subtracting the address of the first block.  This is probably
+     not what you want.  */
+
+  return (result);
+}
+
+#else /* not CRAY2 */
+/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
+   Determine the number of the cell within the stack,
+   given the address of the cell.  The purpose of this
+   routine is to linearize, in some sense, stack addresses
+   for alloca.  */
+
+static long
+i00afunc (long address)
+{
+  long stkl = 0;
+
+  long size, pseg, this_segment, stack;
+  long result = 0;
+
+  struct stack_segment_linkage *ssptr;
+
+  /* Register B67 contains the address of the end of the
+     current stack segment.  If you (as a subprogram) store
+     your registers on the stack and find that you are past
+     the contents of B67, you have overflowed the segment.
+
+     B67 also points to the stack segment linkage control
+     area, which is what we are really interested in.  */
+
+  stkl = CRAY_STACKSEG_END ();
+  ssptr = (struct stack_segment_linkage *) stkl;
+
+  /* If one subtracts 'size' from the end of the segment,
+     one has the address of the first word of the segment.
+
+     If this is not the first segment, 'pseg' will be
+     nonzero.  */
+
+  pseg = ssptr->sspseg;
+  size = ssptr->sssize;
+
+  this_segment = stkl - size;
+
+  /* It is possible that calling this routine itself caused
+     a stack overflow.  Discard stack segments which do not
+     contain the target address.  */
+
+  while (!(this_segment <= address && address <= stkl))
+    {
+#ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
+#endif
+      if (pseg == 0)
+	break;
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      this_segment = stkl - size;
+    }
+
+  result = address - this_segment;
+
+  /* If you subtract pseg from the current end of the stack,
+     you get the address of the previous stack segment's end.
+     This seems a little convoluted to me, but I'll bet you save
+     a cycle somewhere.  */
+
+  while (pseg != 0)
+    {
+#ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o\n", pseg, size);
+#endif
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      result += size;
+    }
+  return (result);
+}
+
+#endif /* not CRAY2 */
+#endif /* CRAY */
+
+#endif /* no alloca */
+#endif /* not GCC version 2 */
diff --git a/amiga.c b/amiga.c
new file mode 100644
index 0000000..1ef949c
--- /dev/null
+++ b/amiga.c
@@ -0,0 +1,117 @@
+/* Running commands on Amiga
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "variable.h"
+#include "amiga.h"
+#include <assert.h>
+#include <exec/memory.h>
+#include <dos/dostags.h>
+#include <proto/exec.h>
+#include <proto/dos.h>
+
+static const char Amiga_version[] = "$VER: Make 3.74.3 (12.05.96) \n"
+                    "Amiga Port by A. Digulla (digulla@home.lake.de)";
+
+int
+MyExecute (char **argv)
+{
+    char * buffer, * ptr;
+    char ** aptr;
+    int len = 0;
+    int status;
+
+    for (aptr=argv; *aptr; aptr++)
+    {
+        len += strlen (*aptr) + 4;
+    }
+
+    buffer = AllocMem (len, MEMF_ANY);
+
+    if (!buffer)
+      O (fatal, NILF, "MyExecute: Cannot allocate space for calling a command\n");
+
+    ptr = buffer;
+
+    for (aptr=argv; *aptr; aptr++)
+    {
+        if (((*aptr)[0] == ';' && !(*aptr)[1]))
+        {
+            *ptr ++ = '"';
+            strcpy (ptr, *aptr);
+            ptr += strlen (ptr);
+            *ptr ++ = '"';
+        }
+        else if ((*aptr)[0] == '@' && (*aptr)[1] == '@' && !(*aptr)[2])
+        {
+            *ptr ++ = '\n';
+            continue;
+        }
+        else
+        {
+            strcpy (ptr, *aptr);
+            ptr += strlen (ptr);
+        }
+        *ptr ++ = ' ';
+        *ptr = 0;
+    }
+
+    ptr[-1] = '\n';
+
+    status = SystemTags (buffer,
+        SYS_UserShell, TRUE,
+        TAG_END);
+
+    FreeMem (buffer, len);
+
+    if (SetSignal (0L,0L) & SIGBREAKF_CTRL_C)
+        status = 20;
+
+    /* Warnings don't count */
+    if (status == 5)
+        status = 0;
+
+    return status;
+}
+
+char *
+wildcard_expansion (char *wc, char *o)
+{
+#   define PATH_SIZE    1024
+    struct AnchorPath * apath;
+
+    if ( (apath = AllocMem (sizeof (struct AnchorPath) + PATH_SIZE,
+            MEMF_CLEAR))
+        )
+    {
+        apath->ap_Strlen = PATH_SIZE;
+
+        if (MatchFirst (wc, apath) == 0)
+        {
+            do
+            {
+                o = variable_buffer_output (o, apath->ap_Buf,
+                        strlen (apath->ap_Buf));
+                o = variable_buffer_output (o, " ",1);
+            } while (MatchNext (apath) == 0);
+        }
+
+        MatchEnd (apath);
+        FreeMem (apath, sizeof (struct AnchorPath) + PATH_SIZE);
+    }
+
+    return o;
+}
diff --git a/amiga.h b/amiga.h
new file mode 100644
index 0000000..00bca4f
--- /dev/null
+++ b/amiga.h
@@ -0,0 +1,18 @@
+/* Definitions for amiga specific things
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+int MyExecute (char ** argv);
+char * wildcard_expansion (char * wc, char * o);
diff --git a/ar.c b/ar.c
new file mode 100644
index 0000000..675572a
--- /dev/null
+++ b/ar.c
@@ -0,0 +1,328 @@
+/* Interface to 'ar' archives for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#ifndef NO_ARCHIVES
+
+#include "filedef.h"
+#include "dep.h"
+#include <fnmatch.h>
+
+/* Return nonzero if NAME is an archive-member reference, zero if not.  An
+   archive-member reference is a name like 'lib(member)' where member is a
+   non-empty string.
+   If a name like 'lib((entry))' is used, a fatal error is signaled at
+   the attempt to use this unsupported feature.  */
+
+int
+ar_name (const char *name)
+{
+  const char *p = strchr (name, '(');
+  const char *end;
+
+  if (p == 0 || p == name)
+    return 0;
+
+  end = p + strlen (p) - 1;
+  if (*end != ')' || end == p + 1)
+    return 0;
+
+  if (p[1] == '(' && end[-1] == ')')
+    OS (fatal, NILF, _("attempt to use unsupported feature: '%s'"), name);
+
+  return 1;
+}
+
+
+/* Parse the archive-member reference NAME into the archive and member names.
+   Creates one allocated string containing both names, pointed to by ARNAME_P.
+   MEMNAME_P points to the member.  */
+
+void
+ar_parse_name (const char *name, char **arname_p, char **memname_p)
+{
+  char *p;
+
+  *arname_p = xstrdup (name);
+  p = strchr (*arname_p, '(');
+  *(p++) = '\0';
+  p[strlen (p) - 1] = '\0';
+  *memname_p = p;
+}
+
+
+/* This function is called by 'ar_scan' to find which member to look at.  */
+
+/* ARGSUSED */
+static long int
+ar_member_date_1 (int desc UNUSED, const char *mem, int truncated,
+                  long int hdrpos UNUSED, long int datapos UNUSED,
+                  long int size UNUSED, long int date,
+                  int uid UNUSED, int gid UNUSED, int mode UNUSED,
+                  const void *name)
+{
+  return ar_name_equal (name, mem, truncated) ? date : 0;
+}
+
+/* Return the modtime of NAME.  */
+
+time_t
+ar_member_date (const char *name)
+{
+  char *arname;
+  char *memname;
+  long int val;
+
+  ar_parse_name (name, &arname, &memname);
+
+  /* Make sure we know the modtime of the archive itself because we are
+     likely to be called just before commands to remake a member are run,
+     and they will change the archive itself.
+
+     But we must be careful not to enter_file the archive itself if it does
+     not exist, because pattern_search assumes that files found in the data
+     base exist or can be made.  */
+  {
+    struct file *arfile;
+    arfile = lookup_file (arname);
+    if (arfile == 0 && file_exists_p (arname))
+      arfile = enter_file (strcache_add (arname));
+
+    if (arfile != 0)
+      (void) f_mtime (arfile, 0);
+  }
+
+  val = ar_scan (arname, ar_member_date_1, memname);
+
+  free (arname);
+
+  return (val <= 0 ? (time_t) -1 : (time_t) val);
+}
+
+/* Set the archive-member NAME's modtime to now.  */
+
+#ifdef VMS
+int
+ar_touch (const char *name)
+{
+  O (error, NILF, _("touch archive member is not available on VMS"));
+  return -1;
+}
+#else
+int
+ar_touch (const char *name)
+{
+  char *arname, *memname;
+  int val;
+
+  ar_parse_name (name, &arname, &memname);
+
+  /* Make sure we know the modtime of the archive itself before we
+     touch the member, since this will change the archive modtime.  */
+  {
+    struct file *arfile;
+    arfile = enter_file (strcache_add (arname));
+    f_mtime (arfile, 0);
+  }
+
+  val = 1;
+  switch (ar_member_touch (arname, memname))
+    {
+    case -1:
+      OS (error, NILF, _("touch: Archive '%s' does not exist"), arname);
+      break;
+    case -2:
+      OS (error, NILF, _("touch: '%s' is not a valid archive"), arname);
+      break;
+    case -3:
+      perror_with_name ("touch: ", arname);
+      break;
+    case 1:
+      OSS (error, NILF,
+           _("touch: Member '%s' does not exist in '%s'"), memname, arname);
+      break;
+    case 0:
+      val = 0;
+      break;
+    default:
+      OS (error, NILF,
+          _("touch: Bad return code from ar_member_touch on '%s'"), name);
+    }
+
+  free (arname);
+
+  return val;
+}
+#endif /* !VMS */
+
+/* State of an 'ar_glob' run, passed to 'ar_glob_match'.  */
+
+/* On VMS, (object) modules in libraries do not have suffixes. That is, to
+   find a match for a pattern, the pattern must not have any suffix. So the
+   suffix of the pattern is saved and the pattern is stripped (ar_glob).
+   If there is a match and the match, which is a module name, is added to
+   the chain, the saved suffix is added back to construct a source filename
+   (ar_glob_match). */
+
+struct ar_glob_state
+  {
+    const char *arname;
+    const char *pattern;
+#ifdef VMS
+    char *suffix;
+#endif
+    unsigned int size;
+    struct nameseq *chain;
+    unsigned int n;
+  };
+
+/* This function is called by 'ar_scan' to match one archive
+   element against the pattern in STATE.  */
+
+static long int
+ar_glob_match (int desc UNUSED, const char *mem, int truncated UNUSED,
+               long int hdrpos UNUSED, long int datapos UNUSED,
+               long int size UNUSED, long int date UNUSED, int uid UNUSED,
+               int gid UNUSED, int mode UNUSED, const void *arg)
+{
+  struct ar_glob_state *state = (struct ar_glob_state *)arg;
+
+  if (fnmatch (state->pattern, mem, FNM_PATHNAME|FNM_PERIOD) == 0)
+    {
+      /* We have a match.  Add it to the chain.  */
+      struct nameseq *new = xcalloc (state->size);
+#ifdef VMS
+      if (state->suffix)
+        new->name = strcache_add(
+            concat(5, state->arname, "(", mem, state->suffix, ")"));
+      else
+#endif
+        new->name = strcache_add(concat(4, state->arname, "(", mem, ")"));
+      new->next = state->chain;
+      state->chain = new;
+      ++state->n;
+    }
+
+  return 0L;
+}
+
+/* Return nonzero if PATTERN contains any metacharacters.
+   Metacharacters can be quoted with backslashes if QUOTE is nonzero.  */
+static int
+glob_pattern_p (const char *pattern, int quote)
+{
+  const char *p;
+  int opened = 0;
+
+  for (p = pattern; *p != '\0'; ++p)
+    switch (*p)
+      {
+      case '?':
+      case '*':
+        return 1;
+
+      case '\\':
+        if (quote)
+          ++p;
+        break;
+
+      case '[':
+        opened = 1;
+        break;
+
+      case ']':
+        if (opened)
+          return 1;
+        break;
+      }
+
+  return 0;
+}
+
+/* Glob for MEMBER_PATTERN in archive ARNAME.
+   Return a malloc'd chain of matching elements (or nil if none).  */
+
+struct nameseq *
+ar_glob (const char *arname, const char *member_pattern, unsigned int size)
+{
+  struct ar_glob_state state;
+  struct nameseq *n;
+  const char **names;
+  unsigned int i;
+#ifdef VMS
+  char *vms_member_pattern;
+#endif
+  if (! glob_pattern_p (member_pattern, 1))
+    return 0;
+
+  /* Scan the archive for matches.
+     ar_glob_match will accumulate them in STATE.chain.  */
+  state.arname = arname;
+  state.pattern = member_pattern;
+#ifdef VMS
+    {
+      /* In a copy of the pattern, find the suffix, save it and  remove it from
+         the pattern */
+      char *lastdot;
+      vms_member_pattern = xstrdup(member_pattern);
+      lastdot = strrchr(vms_member_pattern, '.');
+      state.suffix = lastdot;
+      if (lastdot)
+        {
+          state.suffix = xstrdup(lastdot);
+          *lastdot = 0;
+        }
+      state.pattern = vms_member_pattern;
+    }
+#endif
+  state.size = size;
+  state.chain = 0;
+  state.n = 0;
+  ar_scan (arname, ar_glob_match, &state);
+
+#ifdef VMS
+  /* Deallocate any duplicated string */
+  free(vms_member_pattern);
+  if (state.suffix)
+    {
+      free(state.suffix);
+    }
+#endif
+
+  if (state.chain == 0)
+    return 0;
+
+  /* Now put the names into a vector for sorting.  */
+  names = alloca (state.n * sizeof (const char *));
+  i = 0;
+  for (n = state.chain; n != 0; n = n->next)
+    names[i++] = n->name;
+
+  /* Sort them alphabetically.  */
+  /* MSVC erroneously warns without a cast here.  */
+  qsort ((void *)names, i, sizeof (*names), alpha_compare);
+
+  /* Put them back into the chain in the sorted order.  */
+  i = 0;
+  for (n = state.chain; n != 0; n = n->next)
+    n->name = names[i++];
+
+  return state.chain;
+}
+
+#endif  /* Not NO_ARCHIVES.  */
diff --git a/arscan.c b/arscan.c
new file mode 100644
index 0000000..24286fd
--- /dev/null
+++ b/arscan.c
@@ -0,0 +1,961 @@
+/* Library function for scanning an archive file.
+Copyright (C) 1987-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#ifdef TEST
+/* Hack, the real error() routine eventually pulls in die from main.c */
+#define error(a, b, c, d)
+#endif
+
+#ifdef HAVE_FCNTL_H
+#include <fcntl.h>
+#else
+#include <sys/file.h>
+#endif
+
+#ifndef NO_ARCHIVES
+
+#ifdef VMS
+#include <lbrdef.h>
+#include <mhddef.h>
+#include <credef.h>
+#include <descrip.h>
+#include <ctype.h>
+#include <ssdef.h>
+#include <stsdef.h>
+#include <rmsdef.h>
+globalvalue unsigned int LBR$_HDRTRUNC;
+
+#if __DECC
+#include <unixlib.h>
+#include <lbr$routines.h>
+#endif
+const char *
+vmsify (const char *name, int type);
+
+/* Time conversion from VMS to Unix
+   Conversion from local time (stored in library) to GMT (needed for gmake)
+   Note: The tm_gmtoff element is a VMS extension to the ANSI standard. */
+static time_t
+vms_time_to_unix(void *vms_time)
+{
+  struct tm *tmp;
+  time_t unix_time;
+
+  unix_time = decc$fix_time(vms_time);
+  tmp = localtime(&unix_time);
+  unix_time -= tmp->tm_gmtoff;
+
+  return unix_time;
+}
+
+
+/* VMS library routines need static variables for callback */
+static void *VMS_lib_idx;
+
+static const void *VMS_saved_arg;
+
+static long int (*VMS_function) ();
+
+static long int VMS_function_ret;
+
+
+/* This is a callback procedure for lib$get_index */
+static int
+VMS_get_member_info(struct dsc$descriptor_s *module, unsigned long *rfa)
+{
+  int status, i;
+  const int truncated = 0; /* Member name may be truncated */
+  time_t member_date; /* Member date */
+  char *filename;
+  unsigned int buffer_length; /* Actual buffer length */
+
+  /* Unused constants - Make does not actually use most of these */
+  const int file_desc = -1; /* archive file descriptor for reading the data */
+  const int header_position = 0; /* Header position */
+  const int data_position = 0; /* Data position in file */
+  const int data_size = 0; /* Data size */
+  const int uid = 0; /* member gid */
+  const int gid = 0; /* member gid */
+  const int mode = 0; /* member protection mode */
+  /* End of unused constants */
+
+  static struct dsc$descriptor_s bufdesc =
+    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
+
+  /* Only need the module definition */
+  struct mhddef *mhd;
+
+  /* If a previous callback is non-zero, just return that status */
+  if (VMS_function_ret)
+    {
+      return SS$_NORMAL;
+    }
+
+  /* lbr_set_module returns more than just the module header. So allocate
+     a buffer which is big enough: the maximum LBR$C_MAXHDRSIZ. That's at
+     least bigger than the size of struct mhddef.
+     If the request is too small, a buffer truncated warning is issued so
+     it can be reissued with a larger buffer.
+     We do not care if the buffer is truncated, so that is still a success. */
+  mhd = xmalloc(LBR$C_MAXHDRSIZ);
+  bufdesc.dsc$a_pointer = (char *) mhd;
+  bufdesc.dsc$w_length = LBR$C_MAXHDRSIZ;
+
+  status = lbr$set_module(&VMS_lib_idx, rfa, &bufdesc, &buffer_length, 0);
+
+  if ((status != LBR$_HDRTRUNC) && !$VMS_STATUS_SUCCESS(status))
+    {
+      ON(error, NILF,
+          _("lbr$set_module() failed to extract module info, status = %d"),
+          status);
+
+      lbr$close(&VMS_lib_idx);
+
+      return status;
+    }
+
+#ifdef TEST
+  /* When testing this code, it is useful to know the length returned */
+  printf("Input length = %d, actual = %d\n",
+      bufdesc.dsc$w_length, buffer_length);
+#endif
+
+  /* Conversion from VMS time to C time.
+     VMS defectlet - mhddef is sub-optimal, for the time, it has a 32 bit
+     longword, mhd$l_datim, and a 32 bit fill instead of two longwords, or
+     equivalent. */
+  member_date = vms_time_to_unix(&mhd->mhd$l_datim);
+  free(mhd);
+
+  /* Here we have a problem.  The module name on VMS does not have
+     a file type, but the filename pattern in the "VMS_saved_arg"
+     may have one.
+     But only the method being called knows how to interpret the
+     filename pattern.
+     There are currently two different formats being used.
+     This means that we need a VMS specific code in those methods
+     to handle it. */
+  filename = xmalloc(module->dsc$w_length + 1);
+
+  /* TODO: We may need an option to preserve the case of the module
+     For now force the module name to lower case */
+  for (i = 0; i < module->dsc$w_length; i++)
+    filename[i] = _tolower((unsigned char )module->dsc$a_pointer[i]);
+
+  filename[i] = '\0';
+
+  VMS_function_ret = (*VMS_function)(file_desc, filename, truncated,
+      header_position, data_position, data_size, member_date, uid, gid, mode,
+      VMS_saved_arg);
+
+  free(filename);
+  return SS$_NORMAL;
+}
+
+
+/* Takes three arguments ARCHIVE, FUNCTION and ARG.
+
+   Open the archive named ARCHIVE, find its members one by one,
+   and for each one call FUNCTION with the following arguments:
+     archive file descriptor for reading the data,
+     member name,
+     member name might be truncated flag,
+     member header position in file,
+     member data position in file,
+     member data size,
+     member date,
+     member uid,
+     member gid,
+     member protection mode,
+     ARG.
+
+   NOTE: on VMS systems, only name, date, and arg are meaningful!
+
+   The descriptor is poised to read the data of the member
+   when FUNCTION is called.  It does not matter how much
+   data FUNCTION reads.
+
+   If FUNCTION returns nonzero, we immediately return
+   what FUNCTION returned.
+
+   Returns -1 if archive does not exist,
+   Returns -2 if archive has invalid format.
+   Returns 0 if have scanned successfully.  */
+
+long int
+ar_scan (const char *archive, ar_member_func_t function, const void *varg)
+{
+  char *vms_archive;
+
+  static struct dsc$descriptor_s libdesc =
+    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
+
+  const unsigned long func = LBR$C_READ;
+  const unsigned long type = LBR$C_TYP_UNK;
+  const unsigned long index = 1;
+  unsigned long lib_idx;
+  int status;
+
+  VMS_saved_arg = varg;
+
+  /* Null archive string can show up in test and cause an access violation */
+  if (archive == NULL)
+    {
+      /* Null filenames do not exist */
+      return -1;
+    }
+
+  /* archive path name must be in VMS format */
+  vms_archive = (char *) vmsify(archive, 0);
+
+  status = lbr$ini_control(&VMS_lib_idx, &func, &type, 0);
+
+  if (!$VMS_STATUS_SUCCESS(status))
+    {
+      ON(error, NILF, _("lbr$ini_control() failed with status = %d"), status);
+      return -2;
+    }
+
+  libdesc.dsc$a_pointer = vms_archive;
+  libdesc.dsc$w_length = strlen(vms_archive);
+
+  status = lbr$open(&VMS_lib_idx, &libdesc, 0, NULL, 0, NULL, 0);
+
+  if (!$VMS_STATUS_SUCCESS(status))
+    {
+
+      /* TODO: A library format failure could mean that this is a file
+         generated by the GNU AR utility and in that case, we need to
+         take the UNIX codepath.  This will also take a change to the
+         GNV AR wrapper program. */
+
+      switch (status)
+        {
+      case RMS$_FNF:
+        /* Archive does not exist */
+        return -1;
+      default:
+#ifndef TEST
+        OSN(error, NILF,
+            _("unable to open library '%s' to lookup member status %d"),
+            archive, status);
+#endif
+        /* For library format errors, specification says to return -2 */
+        return -2;
+        }
+    }
+
+  VMS_function = function;
+
+  /* Clear the return status, as we are supposed to stop calling the
+     callback function if it becomes non-zero, and this is a static
+     variable. */
+  VMS_function_ret = 0;
+
+  status = lbr$get_index(&VMS_lib_idx, &index, VMS_get_member_info, NULL, 0);
+
+  lbr$close(&VMS_lib_idx);
+
+  /* Unless a failure occurred in the lbr$ routines, return the
+     the status from the 'function' routine. */
+  if ($VMS_STATUS_SUCCESS(status))
+    {
+      return VMS_function_ret;
+    }
+
+  /* This must be something wrong with the library and an error
+     message should already have been printed. */
+  return -2;
+}
+
+#else /* !VMS */
+
+/* SCO Unix's compiler defines both of these.  */
+#ifdef  M_UNIX
+#undef  M_XENIX
+#endif
+
+/* On the sun386i and in System V rel 3, ar.h defines two different archive
+   formats depending upon whether you have defined PORTAR (normal) or PORT5AR
+   (System V Release 1).  There is no default, one or the other must be defined
+   to have a nonzero value.  */
+
+#if (!defined (PORTAR) || PORTAR == 0) && (!defined (PORT5AR) || PORT5AR == 0)
+#undef  PORTAR
+#ifdef M_XENIX
+/* According to Jim Sievert <jas1@rsvl.unisys.com>, for SCO XENIX defining
+   PORTAR to 1 gets the wrong archive format, and defining it to 0 gets the
+   right one.  */
+#define PORTAR 0
+#else
+#define PORTAR 1
+#endif
+#endif
+
+/* On AIX, define these symbols to be sure to get both archive formats.
+   AIX 4.3 introduced the "big" archive format to support 64-bit object
+   files, so on AIX 4.3 systems we need to support both the "normal" and
+   "big" archive formats.  An archive's format is indicated in the
+   "fl_magic" field of the "FL_HDR" structure.  For a normal archive,
+   this field will be the string defined by the AIAMAG symbol.  For a
+   "big" archive, it will be the string defined by the AIAMAGBIG symbol
+   (at least on AIX it works this way).
+
+   Note: we'll define these symbols regardless of which AIX version
+   we're compiling on, but this is okay since we'll use the new symbols
+   only if they're present.  */
+#ifdef _AIX
+# define __AR_SMALL__
+# define __AR_BIG__
+#endif
+
+#ifndef WINDOWS32
+# if !defined (__ANDROID__) && !defined (__BEOS__)
+#  include <ar.h>
+# else
+   /* These platforms don't have <ar.h> but have archives in the same format
+    * as many other Unices.  This was taken from GNU binutils for BeOS.
+    */
+#  define ARMAG "!<arch>\n"     /* String that begins an archive file.  */
+#  define SARMAG 8              /* Size of that string.  */
+#  define ARFMAG "`\n"          /* String in ar_fmag at end of each header.  */
+struct ar_hdr
+  {
+    char ar_name[16];           /* Member file name, sometimes / terminated. */
+    char ar_date[12];           /* File date, decimal seconds since Epoch.  */
+    char ar_uid[6], ar_gid[6];  /* User and group IDs, in ASCII decimal.  */
+    char ar_mode[8];            /* File mode, in ASCII octal.  */
+    char ar_size[10];           /* File size, in ASCII decimal.  */
+    char ar_fmag[2];            /* Always contains ARFMAG.  */
+  };
+# endif
+# define TOCHAR(_m)     (_m)
+#else
+/* These should allow us to read Windows (VC++) libraries (according to Frank
+ * Libbrecht <frankl@abzx.belgium.hp.com>)
+ */
+# include <windows.h>
+# include <windef.h>
+# include <io.h>
+# define ARMAG      IMAGE_ARCHIVE_START
+# define SARMAG     IMAGE_ARCHIVE_START_SIZE
+# define ar_hdr     _IMAGE_ARCHIVE_MEMBER_HEADER
+# define ar_name    Name
+# define ar_mode    Mode
+# define ar_size    Size
+# define ar_date    Date
+# define ar_uid     UserID
+# define ar_gid     GroupID
+/* In Windows the member names have type BYTE so we must cast them.  */
+# define TOCHAR(_m)     ((char *)(_m))
+#endif
+
+/* Cray's <ar.h> apparently defines this.  */
+#ifndef AR_HDR_SIZE
+# define   AR_HDR_SIZE  (sizeof (struct ar_hdr))
+#endif
+
+/* Takes three arguments ARCHIVE, FUNCTION and ARG.
+
+   Open the archive named ARCHIVE, find its members one by one,
+   and for each one call FUNCTION with the following arguments:
+     archive file descriptor for reading the data,
+     member name,
+     member name might be truncated flag,
+     member header position in file,
+     member data position in file,
+     member data size,
+     member date,
+     member uid,
+     member gid,
+     member protection mode,
+     ARG.
+
+   The descriptor is poised to read the data of the member
+   when FUNCTION is called.  It does not matter how much
+   data FUNCTION reads.
+
+   If FUNCTION returns nonzero, we immediately return
+   what FUNCTION returned.
+
+   Returns -1 if archive does not exist,
+   Returns -2 if archive has invalid format.
+   Returns 0 if have scanned successfully.  */
+
+long int
+ar_scan (const char *archive, ar_member_func_t function, const void *arg)
+{
+#ifdef AIAMAG
+  FL_HDR fl_header;
+# ifdef AIAMAGBIG
+  int big_archive = 0;
+  FL_HDR_BIG fl_header_big;
+# endif
+#endif
+  char *namemap = 0;
+  int desc = open (archive, O_RDONLY, 0);
+  if (desc < 0)
+    return -1;
+#ifdef SARMAG
+  {
+    char buf[SARMAG];
+    register int nread = read (desc, buf, SARMAG);
+    if (nread != SARMAG || memcmp (buf, ARMAG, SARMAG))
+      {
+        (void) close (desc);
+        return -2;
+      }
+  }
+#else
+#ifdef AIAMAG
+  {
+    register int nread = read (desc, &fl_header, FL_HSZ);
+
+    if (nread != FL_HSZ)
+      {
+        (void) close (desc);
+        return -2;
+      }
+#ifdef AIAMAGBIG
+    /* If this is a "big" archive, then set the flag and
+       re-read the header into the "big" structure. */
+    if (!memcmp (fl_header.fl_magic, AIAMAGBIG, SAIAMAG))
+      {
+        big_archive = 1;
+
+        /* seek back to beginning of archive */
+        if (lseek (desc, 0, 0) < 0)
+          {
+            (void) close (desc);
+            return -2;
+          }
+
+        /* re-read the header into the "big" structure */
+        nread = read (desc, &fl_header_big, FL_HSZ_BIG);
+        if (nread != FL_HSZ_BIG)
+          {
+            (void) close (desc);
+            return -2;
+          }
+      }
+    else
+#endif
+       /* Check to make sure this is a "normal" archive. */
+      if (memcmp (fl_header.fl_magic, AIAMAG, SAIAMAG))
+        {
+          (void) close (desc);
+          return -2;
+        }
+  }
+#else
+  {
+#ifndef M_XENIX
+    int buf;
+#else
+    unsigned short int buf;
+#endif
+    register int nread = read (desc, &buf, sizeof (buf));
+    if (nread != sizeof (buf) || buf != ARMAG)
+      {
+        (void) close (desc);
+        return -2;
+      }
+  }
+#endif
+#endif
+
+  /* Now find the members one by one.  */
+  {
+#ifdef SARMAG
+    register long int member_offset = SARMAG;
+#else
+#ifdef AIAMAG
+    long int member_offset;
+    long int last_member_offset;
+
+#ifdef AIAMAGBIG
+    if ( big_archive )
+      {
+        sscanf (fl_header_big.fl_fstmoff, "%20ld", &member_offset);
+        sscanf (fl_header_big.fl_lstmoff, "%20ld", &last_member_offset);
+      }
+    else
+#endif
+      {
+        sscanf (fl_header.fl_fstmoff, "%12ld", &member_offset);
+        sscanf (fl_header.fl_lstmoff, "%12ld", &last_member_offset);
+      }
+
+    if (member_offset == 0)
+      {
+        /* Empty archive.  */
+        close (desc);
+        return 0;
+      }
+#else
+#ifndef M_XENIX
+    register long int member_offset = sizeof (int);
+#else   /* Xenix.  */
+    register long int member_offset = sizeof (unsigned short int);
+#endif  /* Not Xenix.  */
+#endif
+#endif
+
+    while (1)
+      {
+        register int nread;
+        struct ar_hdr member_header;
+#ifdef AIAMAGBIG
+        struct ar_hdr_big member_header_big;
+#endif
+#ifdef AIAMAG
+        char name[256];
+        int name_len;
+        long int dateval;
+        int uidval, gidval;
+        long int data_offset;
+#else
+        char namebuf[sizeof member_header.ar_name + 1];
+        char *name;
+        int is_namemap;         /* Nonzero if this entry maps long names.  */
+        int long_name = 0;
+#endif
+        long int eltsize;
+        int eltmode;
+        long int fnval;
+
+        if (lseek (desc, member_offset, 0) < 0)
+          {
+            (void) close (desc);
+            return -2;
+          }
+
+#ifdef AIAMAG
+#define       AR_MEMHDR_SZ(x) (sizeof(x) - sizeof (x._ar_name))
+
+#ifdef AIAMAGBIG
+        if (big_archive)
+          {
+            nread = read (desc, &member_header_big,
+                          AR_MEMHDR_SZ(member_header_big) );
+
+            if (nread != AR_MEMHDR_SZ(member_header_big))
+              {
+                (void) close (desc);
+                return -2;
+              }
+
+            sscanf (member_header_big.ar_namlen, "%4d", &name_len);
+            nread = read (desc, name, name_len);
+
+            if (nread != name_len)
+              {
+                (void) close (desc);
+                return -2;
+              }
+
+            name[name_len] = 0;
+
+            sscanf (member_header_big.ar_date, "%12ld", &dateval);
+            sscanf (member_header_big.ar_uid, "%12d", &uidval);
+            sscanf (member_header_big.ar_gid, "%12d", &gidval);
+            sscanf (member_header_big.ar_mode, "%12o", &eltmode);
+            sscanf (member_header_big.ar_size, "%20ld", &eltsize);
+
+            data_offset = (member_offset + AR_MEMHDR_SZ(member_header_big)
+                           + name_len + 2);
+          }
+        else
+#endif
+          {
+            nread = read (desc, &member_header,
+                          AR_MEMHDR_SZ(member_header) );
+
+            if (nread != AR_MEMHDR_SZ(member_header))
+              {
+                (void) close (desc);
+                return -2;
+              }
+
+            sscanf (member_header.ar_namlen, "%4d", &name_len);
+            nread = read (desc, name, name_len);
+
+            if (nread != name_len)
+              {
+                (void) close (desc);
+                return -2;
+              }
+
+            name[name_len] = 0;
+
+            sscanf (member_header.ar_date, "%12ld", &dateval);
+            sscanf (member_header.ar_uid, "%12d", &uidval);
+            sscanf (member_header.ar_gid, "%12d", &gidval);
+            sscanf (member_header.ar_mode, "%12o", &eltmode);
+            sscanf (member_header.ar_size, "%12ld", &eltsize);
+
+            data_offset = (member_offset + AR_MEMHDR_SZ(member_header)
+                           + name_len + 2);
+          }
+        data_offset += data_offset % 2;
+
+        fnval =
+          (*function) (desc, name, 0,
+                       member_offset, data_offset, eltsize,
+                       dateval, uidval, gidval,
+                       eltmode, arg);
+
+#else   /* Not AIAMAG.  */
+        nread = read (desc, &member_header, AR_HDR_SIZE);
+        if (nread == 0)
+          /* No data left means end of file; that is OK.  */
+          break;
+
+        if (nread != AR_HDR_SIZE
+#if defined(ARFMAG) || defined(ARFZMAG)
+            || (
+# ifdef ARFMAG
+                memcmp (member_header.ar_fmag, ARFMAG, 2)
+# else
+                1
+# endif
+                &&
+# ifdef ARFZMAG
+                memcmp (member_header.ar_fmag, ARFZMAG, 2)
+# else
+                1
+# endif
+               )
+#endif
+            )
+          {
+            (void) close (desc);
+            return -2;
+          }
+
+        name = namebuf;
+        memcpy (name, member_header.ar_name, sizeof member_header.ar_name);
+        {
+          register char *p = name + sizeof member_header.ar_name;
+          do
+            *p = '\0';
+          while (p > name && *--p == ' ');
+
+#ifndef AIAMAG
+          /* If the member name is "//" or "ARFILENAMES/" this may be
+             a list of file name mappings.  The maximum file name
+             length supported by the standard archive format is 14
+             characters.  This member will actually always be the
+             first or second entry in the archive, but we don't check
+             that.  */
+          is_namemap = (!strcmp (name, "//")
+                        || !strcmp (name, "ARFILENAMES/"));
+#endif  /* Not AIAMAG. */
+          /* On some systems, there is a slash after each member name.  */
+          if (*p == '/')
+            *p = '\0';
+
+#ifndef AIAMAG
+          /* If the member name starts with a space or a slash, this
+             is an index into the file name mappings (used by GNU ar).
+             Otherwise if the member name looks like #1/NUMBER the
+             real member name appears in the element data (used by
+             4.4BSD).  */
+          if (! is_namemap
+              && (name[0] == ' ' || name[0] == '/')
+              && namemap != 0)
+            {
+              name = namemap + atoi (name + 1);
+              long_name = 1;
+            }
+          else if (name[0] == '#'
+                   && name[1] == '1'
+                   && name[2] == '/')
+            {
+              int namesize = atoi (name + 3);
+
+              name = alloca (namesize + 1);
+              nread = read (desc, name, namesize);
+              if (nread != namesize)
+                {
+                  close (desc);
+                  return -2;
+                }
+              name[namesize] = '\0';
+
+              long_name = 1;
+            }
+#endif /* Not AIAMAG. */
+        }
+
+#ifndef M_XENIX
+        sscanf (TOCHAR (member_header.ar_mode), "%o", &eltmode);
+        eltsize = atol (TOCHAR (member_header.ar_size));
+#else   /* Xenix.  */
+        eltmode = (unsigned short int) member_header.ar_mode;
+        eltsize = member_header.ar_size;
+#endif  /* Not Xenix.  */
+
+        fnval =
+          (*function) (desc, name, ! long_name, member_offset,
+                       member_offset + AR_HDR_SIZE, eltsize,
+#ifndef M_XENIX
+                       atol (TOCHAR (member_header.ar_date)),
+                       atoi (TOCHAR (member_header.ar_uid)),
+                       atoi (TOCHAR (member_header.ar_gid)),
+#else   /* Xenix.  */
+                       member_header.ar_date,
+                       member_header.ar_uid,
+                       member_header.ar_gid,
+#endif  /* Not Xenix.  */
+                       eltmode, arg);
+
+#endif  /* AIAMAG.  */
+
+        if (fnval)
+          {
+            (void) close (desc);
+            return fnval;
+          }
+
+#ifdef AIAMAG
+        if (member_offset == last_member_offset)
+          /* End of the chain.  */
+          break;
+
+#ifdef AIAMAGBIG
+        if (big_archive)
+         sscanf (member_header_big.ar_nxtmem, "%20ld", &member_offset);
+        else
+#endif
+          sscanf (member_header.ar_nxtmem, "%12ld", &member_offset);
+
+        if (lseek (desc, member_offset, 0) != member_offset)
+          {
+            (void) close (desc);
+            return -2;
+          }
+#else
+
+        /* If this member maps archive names, we must read it in.  The
+           name map will always precede any members whose names must
+           be mapped.  */
+        if (is_namemap)
+          {
+            char *clear;
+            char *limit;
+
+            namemap = alloca (eltsize);
+            nread = read (desc, namemap, eltsize);
+            if (nread != eltsize)
+              {
+                (void) close (desc);
+                return -2;
+              }
+
+            /* The names are separated by newlines.  Some formats have
+               a trailing slash.  Null terminate the strings for
+               convenience.  */
+            limit = namemap + eltsize;
+            for (clear = namemap; clear < limit; clear++)
+              {
+                if (*clear == '\n')
+                  {
+                    *clear = '\0';
+                    if (clear[-1] == '/')
+                      clear[-1] = '\0';
+                  }
+              }
+
+            is_namemap = 0;
+          }
+
+        member_offset += AR_HDR_SIZE + eltsize;
+        if (member_offset % 2 != 0)
+          member_offset++;
+#endif
+      }
+  }
+
+  close (desc);
+  return 0;
+}
+#endif /* !VMS */
+
+/* Return nonzero iff NAME matches MEM.
+   If TRUNCATED is nonzero, MEM may be truncated to
+   sizeof (struct ar_hdr.ar_name) - 1.  */
+
+int
+ar_name_equal (const char *name, const char *mem, int truncated)
+{
+  const char *p;
+
+  p = strrchr (name, '/');
+  if (p != 0)
+    name = p + 1;
+
+#ifndef VMS
+  if (truncated)
+    {
+#ifdef AIAMAG
+      /* TRUNCATED should never be set on this system.  */
+      abort ();
+#else
+      struct ar_hdr hdr;
+#if !defined (__hpux) && !defined (cray)
+      return strneq (name, mem, sizeof (hdr.ar_name) - 1);
+#else
+      return strneq (name, mem, sizeof (hdr.ar_name) - 2);
+#endif /* !__hpux && !cray */
+#endif /* !AIAMAG */
+    }
+
+  return !strcmp (name, mem);
+#else
+  /* VMS members do not have suffixes, but the filenames usually
+     have.
+     Do we need to strip VMS disk/directory format paths?
+
+     Most VMS compilers etc. by default are case insensitive
+     but produce uppercase external names, incl. module names.
+     However the VMS librarian (ar) and the linker by default
+     are case sensitive: they take what they get, usually
+     uppercase names. So for the non-default settings of the
+     compilers etc. there is a need to have a case sensitive
+     mode. */
+  {
+    int len;
+    len = strlen(mem);
+    int match;
+    char *dot;
+    if ((dot=strrchr(name,'.')))
+      match = (len == dot - name) && !strncasecmp(name, mem, len);
+    else
+      match = !strcasecmp (name, mem);
+    return match;
+  }
+#endif /* !VMS */
+}
+
+#ifndef VMS
+/* ARGSUSED */
+static long int
+ar_member_pos (int desc UNUSED, const char *mem, int truncated,
+               long int hdrpos, long int datapos UNUSED, long int size UNUSED,
+               long int date UNUSED, int uid UNUSED, int gid UNUSED,
+               int mode UNUSED, const void *name)
+{
+  if (!ar_name_equal (name, mem, truncated))
+    return 0;
+  return hdrpos;
+}
+
+/* Set date of member MEMNAME in archive ARNAME to current time.
+   Returns 0 if successful,
+   -1 if file ARNAME does not exist,
+   -2 if not a valid archive,
+   -3 if other random system call error (including file read-only),
+   1 if valid but member MEMNAME does not exist.  */
+
+int
+ar_member_touch (const char *arname, const char *memname)
+{
+  long int pos = ar_scan (arname, ar_member_pos, memname);
+  int fd;
+  struct ar_hdr ar_hdr;
+  int i;
+  unsigned int ui;
+  struct stat statbuf;
+
+  if (pos < 0)
+    return (int) pos;
+  if (!pos)
+    return 1;
+
+  fd = open (arname, O_RDWR, 0666);
+  if (fd < 0)
+    return -3;
+  /* Read in this member's header */
+  if (lseek (fd, pos, 0) < 0)
+    goto lose;
+  if (AR_HDR_SIZE != read (fd, &ar_hdr, AR_HDR_SIZE))
+    goto lose;
+  /* Write back the header, thus touching the archive file.  */
+  if (lseek (fd, pos, 0) < 0)
+    goto lose;
+  if (AR_HDR_SIZE != write (fd, &ar_hdr, AR_HDR_SIZE))
+    goto lose;
+  /* The file's mtime is the time we we want.  */
+  EINTRLOOP (i, fstat (fd, &statbuf));
+  if (i < 0)
+    goto lose;
+#if defined(ARFMAG) || defined(ARFZMAG) || defined(AIAMAG) || defined(WINDOWS32)
+  /* Advance member's time to that time */
+  for (ui = 0; ui < sizeof ar_hdr.ar_date; ui++)
+    ar_hdr.ar_date[ui] = ' ';
+  sprintf (TOCHAR (ar_hdr.ar_date), "%ld", (long int) statbuf.st_mtime);
+#ifdef AIAMAG
+  ar_hdr.ar_date[strlen (ar_hdr.ar_date)] = ' ';
+#endif
+#else
+  ar_hdr.ar_date = statbuf.st_mtime;
+#endif
+  /* Write back this member's header */
+  if (lseek (fd, pos, 0) < 0)
+    goto lose;
+  if (AR_HDR_SIZE != write (fd, &ar_hdr, AR_HDR_SIZE))
+    goto lose;
+  close (fd);
+  return 0;
+
+ lose:
+  i = errno;
+  close (fd);
+  errno = i;
+  return -3;
+}
+#endif
+
+#ifdef TEST
+
+long int
+describe_member (int desc, const char *name, int truncated,
+                 long int hdrpos, long int datapos, long int size,
+                 long int date, int uid, int gid, int mode, const void *arg)
+{
+  extern char *ctime ();
+
+  printf (_("Member '%s'%s: %ld bytes at %ld (%ld).\n"),
+          name, truncated ? _(" (name might be truncated)") : "",
+          size, hdrpos, datapos);
+  printf (_("  Date %s"), ctime (&date));
+  printf (_("  uid = %d, gid = %d, mode = 0%o.\n"), uid, gid, mode);
+
+  return 0;
+}
+
+int
+main (int argc, char **argv)
+{
+  ar_scan (argv[1], describe_member, NULL);
+  return 0;
+}
+
+#endif  /* TEST.  */
+#endif  /* NO_ARCHIVES.  */
diff --git a/build.sh.in b/build.sh.in
new file mode 100755
index 0000000..ea5865d
--- /dev/null
+++ b/build.sh.in
@@ -0,0 +1,81 @@
+#!/bin/sh
+# Shell script to build GNU Make in the absence of any 'make' program.
+# @configure_input@
+
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# See Makefile.in for comments describing these variables.
+
+srcdir='@srcdir@'
+CC='@CC@'
+CFLAGS='@CFLAGS@ @GUILE_CFLAGS@'
+CPPFLAGS='@CPPFLAGS@'
+LDFLAGS='@AM_LDFLAGS@ @LDFLAGS@'
+ALLOCA='@ALLOCA@'
+LOADLIBES='@LIBS@ @GUILE_LIBS@ @LIBINTL@'
+eval extras=\'@LIBOBJS@\'
+REMOTE='@REMOTE@'
+GLOBLIB='@GLOBLIB@'
+PATH_SEPARATOR='@PATH_SEPARATOR@'
+OBJEXT='@OBJEXT@'
+EXEEXT='@EXEEXT@'
+
+# Common prefix for machine-independent installed files.
+prefix='@prefix@'
+# Common prefix for machine-dependent installed files.
+exec_prefix=`eval echo @exec_prefix@`
+# Directory to find libraries in for '-lXXX'.
+libdir=${exec_prefix}/lib
+# Directory to search by default for included makefiles.
+includedir=${prefix}/include
+
+localedir=${prefix}/share/locale
+aliaspath=${localedir}${PATH_SEPARATOR}.
+
+defines="-DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\""' @DEFS@'
+
+# Exit as soon as any command fails.
+set -e
+
+# These are all the objects we need to link together.
+objs="ar.${OBJEXT} arscan.${OBJEXT} commands.${OBJEXT} default.${OBJEXT} dir.${OBJEXT} expand.${OBJEXT} file.${OBJEXT} function.${OBJEXT} getopt.${OBJEXT} getopt1.${OBJEXT} guile.${OBJEXT} implicit.${OBJEXT} job.${OBJEXT} load.${OBJEXT} loadapi.${OBJEXT} main.${OBJEXT} misc.${OBJEXT} output.${OBJEXT} read.${OBJEXT} remake.${OBJEXT} rule.${OBJEXT} signame.${OBJEXT} strcache.${OBJEXT} variable.${OBJEXT} version.${OBJEXT} vpath.${OBJEXT} hash.${OBJEXT} remote-${REMOTE}.${OBJEXT} ${extras} ${ALLOCA}"
+
+if [ x"$GLOBLIB" != x ]; then
+  objs="$objs glob/fnmatch.${OBJEXT} glob/glob.${OBJEXT}"
+  globinc=-I${srcdir}/glob
+fi
+
+# Compile the source files into those objects.
+for file in `echo ${objs} | sed 's/\.'${OBJEXT}'/.c/g'`; do
+  echo compiling ${file}...
+  $CC $defines $CPPFLAGS $CFLAGS \
+      -c -I. -I${srcdir} ${globinc} ${srcdir}/$file
+done
+
+# The object files were actually all put in the current directory.
+# Remove the source directory names from the list.
+srcobjs="$objs"
+objs=
+for obj in $srcobjs; do
+  objs="$objs `basename $obj`"
+done
+
+# Link all the objects together.
+echo linking make...
+$CC $CFLAGS $LDFLAGS $objs $LOADLIBES -o makenew${EXEEXT}
+echo done
+mv -f makenew${EXEEXT} make${EXEEXT}
diff --git a/build_w32.bat b/build_w32.bat
new file mode 100644
index 0000000..00632a7
--- /dev/null
+++ b/build_w32.bat
@@ -0,0 +1,310 @@
+@echo off

+rem Copyright (C) 1996-2014 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

+

+if "%1" == "-h" GoTo Usage

+if "%1" == "--help" GoTo Usage

+if not exist config.h.W32.template GoTo NotSCM

+sed -n "s/^AC_INIT(\[GNU make\],\[\([^]]\+\)\].*/s,%%VERSION%%,\1,g/p" configure.ac > config.h.W32.sed

+echo s,%%PACKAGE%%,make,g >> config.h.W32.sed

+sed -f config.h.W32.sed config.h.W32.template > config.h.W32

+echo static const char *const GUILE_module_defn = ^" \> gmk-default.h

+sed -e "s/;.*//" -e "/^[ \t]*$/d" -e "s/\"/\\\\\"/g" -e "s/$/ \\/" gmk-default.scm >> gmk-default.h

+echo ^";>> gmk-default.h

+:NotSCM

+copy config.h.W32 config.h

+

+rem Guile configuration

+set GUILECFLAGS=

+set GUILELIBS=

+set NOGUILE=

+set OPT=-O2

+set COMPILER=

+set PKGMSC=

+:ParseSW

+if "%1" == "--debug" GoTo SetOpt

+if "%1" == "--without-guile" GoTo NoGuile

+if "%1" == "gcc" GoTo SetCC

+if "%1" == "" GoTo ChkGuile

+:SetOpt

+set OPT=-O0

+shift

+GoTo ParseSW

+:NoGuile

+set NOGUILE=Y

+echo "Building without Guile"

+shift

+GoTo ParseSW

+:SetCC

+set COMPILER=gcc

+echo "Building with GCC"

+shift

+GoTo ParseSW

+rem Build with Guile is supported only on NT and later versions

+:ChkGuile

+if "%NOGUILE%" == "Y" GoTo GuileDone

+if not "%OS%" == "Windows_NT" GoTo NoGuile

+pkg-config --help > guile.tmp 2> NUL

+if ERRORLEVEL 1 GoTo NoPkgCfg

+echo "Checking for Guile 2.0"

+if not "%COMPILER%" == "gcc" set PKGMSC=--msvc-syntax

+pkg-config --cflags --short-errors "guile-2.0" > guile.tmp

+if not ERRORLEVEL 1 set /P GUILECFLAGS= < guile.tmp

+pkg-config --libs --static --short-errors %PKGMSC% "guile-2.0" > guile.tmp

+if not ERRORLEVEL 1 set /P GUILELIBS= < guile.tmp

+if not "%GUILECFLAGS%" == "" GoTo GuileDone

+echo "Checking for Guile 1.8"

+pkg-config --cflags --short-errors "guile-1.8" > guile.tmp

+if not ERRORLEVEL 1 set /P GUILECFLAGS= < guile.tmp

+pkg-config --libs --static --short-errors %PKGMSC% "guile-1.8" > guile.tmp

+if not ERRORLEVEL 1 set /P GUILELIBS= < guile.tmp

+if not "%GUILECFLAGS%" == "" GoTo GuileDone

+echo "No Guile found, building without Guile"

+GoTo GuileDone

+:NoPkgCfg

+echo "pkg-config not found, building without Guile"

+:GuileDone

+if not "%GUILECFLAGS%" == "" echo "Guile found, building with Guile"

+if not "%GUILECFLAGS%" == "" set GUILECFLAGS=%GUILECFLAGS% -DHAVE_GUILE

+if "%COMPILER%" == "gcc" if "%OPT%" == "-O0" echo "Building without compiler optimizations"

+cd w32\subproc

+echo.

+echo "Creating the subproc library"

+%ComSpec% /c build.bat

+cd ..\..

+

+if exist link.dbg del link.dbg

+if exist link.rel del link.rel

+echo.

+echo "Creating GNU Make for Windows 9X/NT/2K/XP/Vista/7/8"

+if "%COMPILER%" == "gcc" GoTo GCCBuild

+set make=gnumake

+echo on

+if not exist .\WinDebug\nul mkdir .\WinDebug

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D TIVOLI /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c variable.c

+echo WinDebug\variable.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c rule.c

+echo WinDebug\rule.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remote-stub.c

+echo WinDebug\remote-stub.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c commands.c

+echo WinDebug\commands.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c file.c

+echo WinDebug\file.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getloadavg.c

+echo WinDebug\getloadavg.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c default.c

+echo WinDebug\default.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c signame.c

+echo WinDebug\signame.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c expand.c

+echo WinDebug\expand.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c dir.c

+echo WinDebug\dir.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od %GUILECFLAGS% /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c main.c

+echo WinDebug\main.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt1.c

+echo WinDebug\getopt1.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c job.c

+echo WinDebug\job.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c output.c

+echo WinDebug\output.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c read.c

+echo WinDebug\read.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c version.c

+echo WinDebug\version.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt.c

+echo WinDebug\getopt.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c arscan.c

+echo WinDebug\arscan.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c hash.c

+echo WinDebug\hash.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c strcache.c

+echo WinDebug\strcache.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remake.c

+echo WinDebug\remake.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c misc.c

+echo WinDebug\misc.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c ar.c

+echo WinDebug\ar.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c function.c

+echo WinDebug\function.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c vpath.c

+echo WinDebug\vpath.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c implicit.c

+echo WinDebug\implicit.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c loadapi.c

+echo WinDebug\loadapi.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c load.c

+echo WinDebug\load.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\dirent.c

+echo WinDebug\dirent.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\posixfcn.c

+echo WinDebug\posixfcn.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\glob.c

+echo WinDebug\glob.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\fnmatch.c

+echo WinDebug\fnmatch.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\pathstuff.c

+echo WinDebug\pathstuff.obj >>link.dbg

+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od %GUILECFLAGS% /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c guile.c

+echo WinDebug\guile.obj >>link.dbg

+:LinkDbg

+echo off

+echo "Linking WinDebug/%make%.exe"

+rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /OUT:.\WinDebug/%make%.exe .\WinDebug/variable.obj  .\WinDebug/rule.obj  .\WinDebug/remote-stub.obj  .\WinDebug/commands.obj  .\WinDebug/file.obj  .\WinDebug/getloadavg.obj  .\WinDebug/default.obj  .\WinDebug/signame.obj  .\WinDebug/expand.obj  .\WinDebug/dir.obj  .\WinDebug/main.obj  .\WinDebug/getopt1.obj  .\WinDebug/job.obj  .\WinDebug/output.obj  .\WinDebug/read.obj  .\WinDebug/version.obj  .\WinDebug/getopt.obj  .\WinDebug/arscan.obj  .\WinDebug/remake.obj  .\WinDebug/hash.obj  .\WinDebug/strcache.obj  .\WinDebug/misc.obj  .\WinDebug/ar.obj  .\WinDebug/function.obj  .\WinDebug/vpath.obj  .\WinDebug/implicit.obj  .\WinDebug/dirent.obj  .\WinDebug/glob.obj  .\WinDebug/fnmatch.obj  .\WinDebug/pathstuff.obj

+echo %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib >>link.dbg

+link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /OUT:.\WinDebug/%make%.exe @link.dbg

+if not exist .\WinDebug/%make%.exe echo "WinDebug build failed"

+if exist .\WinDebug/%make%.exe echo "WinDebug build succeeded!"

+if not exist .\WinRel\nul mkdir .\WinRel

+echo on

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /D TIVOLI /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c variable.c

+echo WinRel\variable.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c rule.c

+echo WinRel\rule.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remote-stub.c

+echo WinRel\remote-stub.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c commands.c

+echo WinRel\commands.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c file.c

+echo WinRel\file.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getloadavg.c

+echo WinRel\getloadavg.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c default.c

+echo WinRel\default.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c signame.c

+echo WinRel\signame.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c expand.c

+echo WinRel\expand.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c dir.c

+echo WinRel\dir.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 %GUILECFLAGS% /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c main.c

+echo WinRel\main.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt1.c

+echo WinRel\getopt1.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c job.c

+echo WinRel\job.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c output.c

+echo WinRel\output.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c read.c

+echo WinRel\read.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c version.c

+echo WinRel\version.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt.c

+echo WinRel\getopt.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c arscan.c

+echo WinRel\arscan.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remake.c

+echo WinRel\remake.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c hash.c

+echo WinRel\hash.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c strcache.c

+echo WinRel\strcache.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c misc.c

+echo WinRel\misc.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c ar.c

+echo WinRel\ar.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c function.c

+echo WinRel\function.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c vpath.c

+echo WinRel\vpath.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c implicit.c

+echo WinRel\implicit.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c loadapi.c

+echo WinRel\loadapi.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c load.c

+echo WinRel\load.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\dirent.c

+echo WinRel\dirent.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\posixfcn.c

+echo WinRel\posixfcn.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\glob.c

+echo WinRel\glob.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\fnmatch.c

+echo WinRel\fnmatch.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\pathstuff.c

+echo WinRel\pathstuff.obj >>link.rel

+cl.exe /nologo /MT /W4 /GX /YX /O2 %GUILECFLAGS% /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c guile.c

+echo WinRel\guile.obj >>link.rel

+:LinkRel

+echo off

+echo "Linking WinRel/%make%.exe"

+rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /OUT:.\WinRel/%make%.exe .\WinRel/variable.obj  .\WinRel/rule.obj  .\WinRel/remote-stub.obj  .\WinRel/commands.obj  .\WinRel/file.obj  .\WinRel/getloadavg.obj  .\WinRel/default.obj  .\WinRel/signame.obj  .\WinRel/expand.obj  .\WinRel/dir.obj  .\WinRel/main.obj  .\WinRel/getopt1.obj  .\WinRel/job.obj  .\WinRel/output.obj  .\WinRel/read.obj  .\WinRel/version.obj  .\WinRel/getopt.obj  .\WinRel/arscan.obj  .\WinRel/remake.obj  .\WinRel/misc.obj  .\WinRel/hash.obj  .\WinRel/strcache.obj  .\WinRel/ar.obj  .\WinRel/function.obj  .\WinRel/vpath.obj  .\WinRel/implicit.obj  .\WinRel/dirent.obj  .\WinRel/glob.obj  .\WinRel/fnmatch.obj  .\WinRel/pathstuff.obj

+echo %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib >>link.rel

+link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /OUT:.\WinRel/%make%.exe @link.rel

+if not exist .\WinRel/%make%.exe echo "WinRel build failed"

+if exist .\WinRel/%make%.exe echo "WinRel build succeeded!"

+set make=

+GoTo BuildEnd

+:GCCBuild

+echo on

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c variable.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c rule.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remote-stub.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c commands.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c file.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getloadavg.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c default.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c signame.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c expand.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c dir.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H %GUILECFLAGS% -c main.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt1.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c job.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c output.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c read.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c version.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c arscan.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remake.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c hash.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c strcache.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c misc.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ar.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c function.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c vpath.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c implicit.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c loadapi.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c load.c

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/glob.c -o glob.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/fnmatch.c -o fnmatch.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./w32/pathstuff.c -o pathstuff.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./w32/compat/posixfcn.c -o posixfcn.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% %GUILECFLAGS% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c guile.c

+:LinkGCC

+@echo off

+Rem The version NN of libgnumake-NN.dll.a should be bumped whenever

+Rem the API changes in binary-incompatible manner.

+@echo on

+gcc -mthreads -gdwarf-2 -g3 -o gnumake.exe variable.o rule.o remote-stub.o commands.o file.o getloadavg.o default.o signame.o expand.o dir.o main.o getopt1.o guile.o job.o output.o read.o version.o getopt.o arscan.o remake.o misc.o hash.o strcache.o ar.o function.o vpath.o implicit.o loadapi.o load.o glob.o fnmatch.o pathstuff.o posixfcn.o w32_misc.o sub_proc.o w32err.o %GUILELIBS% -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbccp32 -Wl,--out-implib=libgnumake-1.dll.a

+@GoTo BuildEnd

+:Usage

+echo Usage: %0 [options] [gcc]

+echo Options:

+echo.  --debug           For GCC only, make a debug build

+echo.                    (MSVC build always makes both debug and release)

+echo.  --without-guile   Do not compile Guile support even if found

+echo.  --help            Display these instructions and exit

+:BuildEnd

+@echo off

+set GUILELIBS=

+set GUILECFLAGS=

+set PKGMSC=

+set OPT=

+set COMPILER=

+set NOGUILE=

+echo on

diff --git a/commands.c b/commands.c
new file mode 100644
index 0000000..7123021
--- /dev/null
+++ b/commands.c
@@ -0,0 +1,712 @@
+/* Command processing for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "dep.h"
+#include "variable.h"
+#include "job.h"
+#include "commands.h"
+#ifdef WINDOWS32
+#include <windows.h>
+#include "w32err.h"
+#endif
+
+#if VMS
+# define FILE_LIST_SEPARATOR ','
+#else
+# define FILE_LIST_SEPARATOR ' '
+#endif
+
+int remote_kill (int id, int sig);
+
+#ifndef HAVE_UNISTD_H
+int getpid ();
+#endif
+
+
+static unsigned long
+dep_hash_1 (const void *key)
+{
+  const struct dep *d = key;
+  return_STRING_HASH_1 (dep_name (d));
+}
+
+static unsigned long
+dep_hash_2 (const void *key)
+{
+  const struct dep *d = key;
+  return_STRING_HASH_2 (dep_name (d));
+}
+
+static int
+dep_hash_cmp (const void *x, const void *y)
+{
+  const struct dep *dx = x;
+  const struct dep *dy = y;
+  return strcmp (dep_name (dx), dep_name (dy));
+}
+
+/* Set FILE's automatic variables up.  */
+
+void
+set_file_variables (struct file *file)
+{
+  struct dep *d;
+  const char *at, *percent, *star, *less;
+
+#ifndef NO_ARCHIVES
+  /* If the target is an archive member 'lib(member)',
+     then $@ is 'lib' and $% is 'member'.  */
+
+  if (ar_name (file->name))
+    {
+      unsigned int len;
+      const char *cp;
+      char *p;
+
+      cp = strchr (file->name, '(');
+      p = alloca (cp - file->name + 1);
+      memcpy (p, file->name, cp - file->name);
+      p[cp - file->name] = '\0';
+      at = p;
+      len = strlen (cp + 1);
+      p = alloca (len);
+      memcpy (p, cp + 1, len - 1);
+      p[len - 1] = '\0';
+      percent = p;
+    }
+  else
+#endif  /* NO_ARCHIVES.  */
+    {
+      at = file->name;
+      percent = "";
+    }
+
+  /* $* is the stem from an implicit or static pattern rule.  */
+  if (file->stem == 0)
+    {
+      /* In Unix make, $* is set to the target name with
+         any suffix in the .SUFFIXES list stripped off for
+         explicit rules.  We store this in the 'stem' member.  */
+      const char *name;
+      unsigned int len;
+
+#ifndef NO_ARCHIVES
+      if (ar_name (file->name))
+        {
+          name = strchr (file->name, '(') + 1;
+          len = strlen (name) - 1;
+        }
+      else
+#endif
+        {
+          name = file->name;
+          len = strlen (name);
+        }
+
+      for (d = enter_file (strcache_add (".SUFFIXES"))->deps; d ; d = d->next)
+        {
+          unsigned int slen = strlen (dep_name (d));
+          if (len > slen && strneq (dep_name (d), name + (len - slen), slen))
+            {
+              file->stem = strcache_add_len (name, len - slen);
+              break;
+            }
+        }
+      if (d == 0)
+        file->stem = "";
+    }
+  star = file->stem;
+
+  /* $< is the first not order-only dependency.  */
+  less = "";
+  for (d = file->deps; d != 0; d = d->next)
+    if (!d->ignore_mtime)
+      {
+        if (!d->need_2nd_expansion)
+          less = dep_name (d);
+        break;
+      }
+
+  if (file->cmds == default_file->cmds)
+    /* This file got its commands from .DEFAULT.
+       In this case $< is the same as $@.  */
+    less = at;
+
+#define DEFINE_VARIABLE(name, len, value) \
+  (void) define_variable_for_file (name,len,value,o_automatic,0,file)
+
+  /* Define the variables.  */
+
+  DEFINE_VARIABLE ("<", 1, less);
+  DEFINE_VARIABLE ("*", 1, star);
+  DEFINE_VARIABLE ("@", 1, at);
+  DEFINE_VARIABLE ("%", 1, percent);
+
+  /* Compute the values for $^, $+, $?, and $|.  */
+
+  {
+    static char *plus_value=0, *bar_value=0, *qmark_value=0;
+    static unsigned int plus_max=0, bar_max=0, qmark_max=0;
+
+    unsigned int qmark_len, plus_len, bar_len;
+    char *cp;
+    char *caret_value;
+    char *qp;
+    char *bp;
+    unsigned int len;
+
+    struct hash_table dep_hash;
+    void **slot;
+
+    /* Compute first the value for $+, which is supposed to contain
+       duplicate dependencies as they were listed in the makefile.  */
+
+    plus_len = 0;
+    bar_len = 0;
+    for (d = file->deps; d != 0; d = d->next)
+      {
+        if (!d->need_2nd_expansion)
+          {
+            if (d->ignore_mtime)
+              bar_len += strlen (dep_name (d)) + 1;
+            else
+              plus_len += strlen (dep_name (d)) + 1;
+          }
+      }
+
+    if (bar_len == 0)
+      bar_len++;
+
+    if (plus_len == 0)
+      plus_len++;
+
+    if (plus_len > plus_max)
+      plus_value = xrealloc (plus_value, plus_max = plus_len);
+
+    cp = plus_value;
+
+    qmark_len = plus_len + 1;   /* Will be this or less.  */
+    for (d = file->deps; d != 0; d = d->next)
+      if (! d->ignore_mtime && ! d->need_2nd_expansion)
+        {
+          const char *c = dep_name (d);
+
+#ifndef NO_ARCHIVES
+          if (ar_name (c))
+            {
+              c = strchr (c, '(') + 1;
+              len = strlen (c) - 1;
+            }
+          else
+#endif
+            len = strlen (c);
+
+          memcpy (cp, c, len);
+          cp += len;
+          *cp++ = FILE_LIST_SEPARATOR;
+          if (! (d->changed || always_make_flag))
+            qmark_len -= len + 1;       /* Don't space in $? for this one.  */
+        }
+
+    /* Kill the last space and define the variable.  */
+
+    cp[cp > plus_value ? -1 : 0] = '\0';
+    DEFINE_VARIABLE ("+", 1, plus_value);
+
+    /* Compute the values for $^, $?, and $|.  */
+
+    cp = caret_value = plus_value; /* Reuse the buffer; it's big enough.  */
+
+    if (qmark_len > qmark_max)
+      qmark_value = xrealloc (qmark_value, qmark_max = qmark_len);
+    qp = qmark_value;
+
+    if (bar_len > bar_max)
+      bar_value = xrealloc (bar_value, bar_max = bar_len);
+    bp = bar_value;
+
+    /* Make sure that no dependencies are repeated in $^, $?, and $|.  It
+       would be natural to combine the next two loops but we can't do it
+       because of a situation where we have two dep entries, the first
+       is order-only and the second is normal (see below).  */
+
+    hash_init (&dep_hash, 500, dep_hash_1, dep_hash_2, dep_hash_cmp);
+
+    for (d = file->deps; d != 0; d = d->next)
+      {
+        if (d->need_2nd_expansion)
+          continue;
+
+        slot = hash_find_slot (&dep_hash, d);
+        if (HASH_VACANT (*slot))
+          hash_insert_at (&dep_hash, d, slot);
+        else
+          {
+            /* Check if the two prerequisites have different ignore_mtime.
+               If so then we need to "upgrade" one that is order-only.  */
+
+            struct dep* hd = (struct dep*) *slot;
+
+            if (d->ignore_mtime != hd->ignore_mtime)
+              d->ignore_mtime = hd->ignore_mtime = 0;
+          }
+      }
+
+    for (d = file->deps; d != 0; d = d->next)
+      {
+        const char *c;
+
+        if (d->need_2nd_expansion || hash_find_item (&dep_hash, d) != d)
+          continue;
+
+        c = dep_name (d);
+#ifndef NO_ARCHIVES
+        if (ar_name (c))
+          {
+            c = strchr (c, '(') + 1;
+            len = strlen (c) - 1;
+          }
+        else
+#endif
+          len = strlen (c);
+
+        if (d->ignore_mtime)
+          {
+            memcpy (bp, c, len);
+            bp += len;
+            *bp++ = FILE_LIST_SEPARATOR;
+          }
+        else
+          {
+            memcpy (cp, c, len);
+            cp += len;
+            *cp++ = FILE_LIST_SEPARATOR;
+            if (d->changed || always_make_flag)
+              {
+                memcpy (qp, c, len);
+                qp += len;
+                *qp++ = FILE_LIST_SEPARATOR;
+              }
+          }
+      }
+
+    hash_free (&dep_hash, 0);
+
+    /* Kill the last spaces and define the variables.  */
+
+    cp[cp > caret_value ? -1 : 0] = '\0';
+    DEFINE_VARIABLE ("^", 1, caret_value);
+
+    qp[qp > qmark_value ? -1 : 0] = '\0';
+    DEFINE_VARIABLE ("?", 1, qmark_value);
+
+    bp[bp > bar_value ? -1 : 0] = '\0';
+    DEFINE_VARIABLE ("|", 1, bar_value);
+  }
+
+#undef  DEFINE_VARIABLE
+}
+
+/* Chop CMDS up into individual command lines if necessary.
+   Also set the 'lines_flags' and 'any_recurse' members.  */
+
+void
+chop_commands (struct commands *cmds)
+{
+  unsigned int nlines, idx;
+  char **lines;
+
+  /* If we don't have any commands,
+     or we already parsed them, never mind.  */
+
+  if (!cmds || cmds->command_lines != 0)
+    return;
+
+  /* Chop CMDS->commands up into lines in CMDS->command_lines.  */
+
+  if (one_shell)
+    {
+      int l = strlen (cmds->commands);
+
+      nlines = 1;
+      lines = xmalloc (nlines * sizeof (char *));
+      lines[0] = xstrdup (cmds->commands);
+
+      /* Strip the trailing newline.  */
+      if (l > 0 && lines[0][l-1] == '\n')
+        lines[0][l-1] = '\0';
+    }
+  else
+    {
+      const char *p;
+
+      nlines = 5;
+      lines = xmalloc (nlines * sizeof (char *));
+      idx = 0;
+      p = cmds->commands;
+      while (*p != '\0')
+        {
+          const char *end = p;
+        find_end:;
+          end = strchr (end, '\n');
+          if (end == 0)
+            end = p + strlen (p);
+          else if (end > p && end[-1] == '\\')
+            {
+              int backslash = 1;
+              const char *b;
+              for (b = end - 2; b >= p && *b == '\\'; --b)
+                backslash = !backslash;
+              if (backslash)
+                {
+                  ++end;
+                  goto find_end;
+                }
+            }
+
+          if (idx == nlines)
+            {
+              nlines += 2;
+              lines = xrealloc (lines, nlines * sizeof (char *));
+            }
+          lines[idx++] = xstrndup (p, end - p);
+          p = end;
+          if (*p != '\0')
+            ++p;
+        }
+
+      if (idx != nlines)
+        {
+          nlines = idx;
+          lines = xrealloc (lines, nlines * sizeof (char *));
+        }
+    }
+
+  /* Finally, set the corresponding CMDS->lines_flags elements and the
+     CMDS->any_recurse flag.  */
+
+  if (nlines > USHRT_MAX)
+    ON (fatal, &cmds->fileinfo, _("Recipe has too many lines (%ud)"), nlines);
+
+  cmds->ncommand_lines = nlines;
+  cmds->command_lines = lines;
+
+  cmds->any_recurse = 0;
+  cmds->lines_flags = xmalloc (nlines);
+
+  for (idx = 0; idx < nlines; ++idx)
+    {
+      int flags = 0;
+      const char *p = lines[idx];
+
+      while (isblank (*p) || *p == '-' || *p == '@' || *p == '+')
+        switch (*(p++))
+          {
+          case '+':
+            flags |= COMMANDS_RECURSE;
+            break;
+          case '@':
+            flags |= COMMANDS_SILENT;
+            break;
+          case '-':
+            flags |= COMMANDS_NOERROR;
+            break;
+          }
+
+      /* If no explicit '+' was given, look for MAKE variable references.  */
+      if (!(flags & COMMANDS_RECURSE)
+          && (strstr (p, "$(MAKE)") != 0 || strstr (p, "${MAKE}") != 0))
+        flags |= COMMANDS_RECURSE;
+
+      cmds->lines_flags[idx] = flags;
+      cmds->any_recurse |= flags & COMMANDS_RECURSE ? 1 : 0;
+    }
+}
+
+/* Execute the commands to remake FILE.  If they are currently executing,
+   return or have already finished executing, just return.  Otherwise,
+   fork off a child process to run the first command line in the sequence.  */
+
+void
+execute_file_commands (struct file *file)
+{
+  const char *p;
+
+  /* Don't go through all the preparations if
+     the commands are nothing but whitespace.  */
+
+  for (p = file->cmds->commands; *p != '\0'; ++p)
+    if (!isspace ((unsigned char)*p) && *p != '-' && *p != '@')
+      break;
+  if (*p == '\0')
+    {
+      /* If there are no commands, assume everything worked.  */
+      set_command_state (file, cs_running);
+      file->update_status = us_success;
+      notice_finished_file (file);
+      return;
+    }
+
+  /* First set the automatic variables according to this file.  */
+
+  initialize_file_variables (file, 0);
+
+  set_file_variables (file);
+
+  /* If this is a loaded dynamic object, unload it before remaking.
+     Some systems don't support overwriting a loaded object.  */
+  if (file->loaded)
+    unload_file (file->name);
+
+  /* Start the commands running.  */
+  new_job (file);
+}
+
+/* This is set while we are inside fatal_error_signal,
+   so things can avoid nonreentrant operations.  */
+
+int handling_fatal_signal = 0;
+
+/* Handle fatal signals.  */
+
+RETSIGTYPE
+fatal_error_signal (int sig)
+{
+#ifdef __MSDOS__
+  extern int dos_status, dos_command_running;
+
+  if (dos_command_running)
+    {
+      /* That was the child who got the signal, not us.  */
+      dos_status |= (sig << 8);
+      return;
+    }
+  remove_intermediates (1);
+  exit (EXIT_FAILURE);
+#else /* not __MSDOS__ */
+#ifdef _AMIGA
+  remove_intermediates (1);
+  if (sig == SIGINT)
+     fputs (_("*** Break.\n"), stderr);
+
+  exit (10);
+#else /* not Amiga */
+#ifdef WINDOWS32
+  extern HANDLE main_thread;
+
+  /* Windows creates a sperate thread for handling Ctrl+C, so we need
+     to suspend the main thread, or else we will have race conditions
+     when both threads call reap_children.  */
+  if (main_thread)
+    {
+      DWORD susp_count = SuspendThread (main_thread);
+
+      if (susp_count != 0)
+        fprintf (stderr, "SuspendThread: suspend count = %ld\n", susp_count);
+      else if (susp_count == (DWORD)-1)
+        {
+          DWORD ierr = GetLastError ();
+
+          fprintf (stderr, "SuspendThread: error %ld: %s\n",
+                   ierr, map_windows32_error_to_string (ierr));
+        }
+    }
+#endif
+  handling_fatal_signal = 1;
+
+  /* Set the handling for this signal to the default.
+     It is blocked now while we run this handler.  */
+  signal (sig, SIG_DFL);
+
+  /* A termination signal won't be sent to the entire
+     process group, but it means we want to kill the children.  */
+
+  if (sig == SIGTERM)
+    {
+      struct child *c;
+      for (c = children; c != 0; c = c->next)
+        if (!c->remote)
+          (void) kill (c->pid, SIGTERM);
+    }
+
+  /* If we got a signal that means the user
+     wanted to kill make, remove pending targets.  */
+
+  if (sig == SIGTERM || sig == SIGINT
+#ifdef SIGHUP
+    || sig == SIGHUP
+#endif
+#ifdef SIGQUIT
+    || sig == SIGQUIT
+#endif
+    )
+    {
+      struct child *c;
+
+      /* Remote children won't automatically get signals sent
+         to the process group, so we must send them.  */
+      for (c = children; c != 0; c = c->next)
+        if (c->remote)
+          (void) remote_kill (c->pid, sig);
+
+      for (c = children; c != 0; c = c->next)
+        delete_child_targets (c);
+
+      /* Clean up the children.  We don't just use the call below because
+         we don't want to print the "Waiting for children" message.  */
+      while (job_slots_used > 0)
+        reap_children (1, 0);
+    }
+  else
+    /* Wait for our children to die.  */
+    while (job_slots_used > 0)
+      reap_children (1, 1);
+
+  /* Delete any non-precious intermediate files that were made.  */
+
+  remove_intermediates (1);
+
+#ifdef SIGQUIT
+  if (sig == SIGQUIT)
+    /* We don't want to send ourselves SIGQUIT, because it will
+       cause a core dump.  Just exit instead.  */
+    exit (MAKE_TROUBLE);
+#endif
+
+#ifdef WINDOWS32
+  if (main_thread)
+    CloseHandle (main_thread);
+  /* Cannot call W32_kill with a pid (it needs a handle).  The exit
+     status of 130 emulates what happens in Bash.  */
+  exit (130);
+#else
+  /* Signal the same code; this time it will really be fatal.  The signal
+     will be unblocked when we return and arrive then to kill us.  */
+  if (kill (getpid (), sig) < 0)
+    pfatal_with_name ("kill");
+#endif /* not WINDOWS32 */
+#endif /* not Amiga */
+#endif /* not __MSDOS__  */
+}
+
+/* Delete FILE unless it's precious or not actually a file (phony),
+   and it has changed on disk since we last stat'd it.  */
+
+static void
+delete_target (struct file *file, const char *on_behalf_of)
+{
+  struct stat st;
+  int e;
+
+  if (file->precious || file->phony)
+    return;
+
+#ifndef NO_ARCHIVES
+  if (ar_name (file->name))
+    {
+      time_t file_date = (file->last_mtime == NONEXISTENT_MTIME
+                          ? (time_t) -1
+                          : (time_t) FILE_TIMESTAMP_S (file->last_mtime));
+      if (ar_member_date (file->name) != file_date)
+        {
+          if (on_behalf_of)
+            OSS (error, NILF,
+                 _("*** [%s] Archive member '%s' may be bogus; not deleted"),
+                 on_behalf_of, file->name);
+          else
+            OS (error, NILF,
+                _("*** Archive member '%s' may be bogus; not deleted"),
+                file->name);
+        }
+      return;
+    }
+#endif
+
+  EINTRLOOP (e, stat (file->name, &st));
+  if (e == 0
+      && S_ISREG (st.st_mode)
+      && FILE_TIMESTAMP_STAT_MODTIME (file->name, st) != file->last_mtime)
+    {
+      if (on_behalf_of)
+        OSS (error, NILF,
+             _("*** [%s] Deleting file '%s'"), on_behalf_of, file->name);
+      else
+        OS (error, NILF, _("*** Deleting file '%s'"), file->name);
+      if (unlink (file->name) < 0
+          && errno != ENOENT)   /* It disappeared; so what.  */
+        perror_with_name ("unlink: ", file->name);
+    }
+}
+
+
+/* Delete all non-precious targets of CHILD unless they were already deleted.
+   Set the flag in CHILD to say they've been deleted.  */
+
+void
+delete_child_targets (struct child *child)
+{
+  struct dep *d;
+
+  if (child->deleted)
+    return;
+
+  /* Delete the target file if it changed.  */
+  delete_target (child->file, NULL);
+
+  /* Also remove any non-precious targets listed in the 'also_make' member.  */
+  for (d = child->file->also_make; d != 0; d = d->next)
+    delete_target (d->file, child->file->name);
+
+  child->deleted = 1;
+}
+
+/* Print out the commands in CMDS.  */
+
+void
+print_commands (const struct commands *cmds)
+{
+  const char *s;
+
+  fputs (_("#  recipe to execute"), stdout);
+
+  if (cmds->fileinfo.filenm == 0)
+    puts (_(" (built-in):"));
+  else
+    printf (_(" (from '%s', line %lu):\n"),
+            cmds->fileinfo.filenm, cmds->fileinfo.lineno);
+
+  s = cmds->commands;
+  while (*s != '\0')
+    {
+      const char *end;
+      int bs;
+
+      /* Print one full logical recipe line: find a non-escaped newline.  */
+      for (end = s, bs = 0; *end != '\0'; ++end)
+        {
+          if (*end == '\n' && !bs)
+            break;
+
+          bs = *end == '\\' ? !bs : 0;
+        }
+
+      printf ("%c%.*s\n", cmd_prefix, (int) (end - s), s);
+
+      s = end + (end[0] == '\n');
+    }
+}
diff --git a/commands.h b/commands.h
new file mode 100644
index 0000000..0d58f22
--- /dev/null
+++ b/commands.h
@@ -0,0 +1,41 @@
+/* Definition of data structures describing shell commands for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Structure that gives the commands to make a file
+   and information about where these commands came from.  */
+
+struct commands
+  {
+    gmk_floc fileinfo;          /* Where commands were defined.  */
+    char *commands;             /* Commands text.  */
+    char **command_lines;       /* Commands chopped up into lines.  */
+    char *lines_flags;          /* One set of flag bits for each line.  */
+    unsigned short ncommand_lines;/* Number of command lines.  */
+    char recipe_prefix;         /* Recipe prefix for this command set.  */
+    unsigned int any_recurse:1; /* Nonzero if any 'lines_flags' elt has */
+                                /* the COMMANDS_RECURSE bit set.  */
+  };
+
+/* Bits in 'lines_flags'.  */
+#define COMMANDS_RECURSE        1 /* Recurses: + or $(MAKE).  */
+#define COMMANDS_SILENT         2 /* Silent: @.  */
+#define COMMANDS_NOERROR        4 /* No errors: -.  */
+
+void execute_file_commands (struct file *file);
+void print_commands (const struct commands *cmds);
+void delete_child_targets (struct child *child);
+void chop_commands (struct commands *cmds);
+void set_file_variables (struct file *file);
diff --git a/config.ami b/config.ami
new file mode 100644
index 0000000..e3d6ee8
--- /dev/null
+++ b/config.ami
@@ -0,0 +1,337 @@
+/* config.h -- hand-massaged for Amiga                                  -*-C-*-
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Define if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+/* #undef _ALL_SOURCE */
+#endif
+
+/* Define if using alloca.c.  */
+#define C_ALLOCA
+
+/* Define if the closedir function returns void instead of int.  */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+/* #undef DGUX */
+
+/* Define if the 'getloadavg' function needs to be run setuid or setgid.  */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to 'unsigned long' or 'unsigned long long'
+   if <inttypes.h> doesn't define.  */
+#define uintmax_t unsigned long
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+#define gid_t int
+
+/* Define if you have alloca, as a function or macro.  */
+/* #undef HAVE_ALLOCA */
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define if your system has a working fnmatch function.  */
+/* #undef HAVE_FNMATCH */
+
+/* Define if your system has its own 'getloadavg' function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the getmntent function.  */
+/* #undef HAVE_GETMNTENT */
+
+/* Embed GNU Guile support */
+/* #undef HAVE_GUILE */
+
+/* Define if the 'long double' type works.  */
+/* #undef HAVE_LONG_DOUBLE */
+
+/* Define if you support file names longer than 14 characters.  */
+#define HAVE_LONG_FILE_NAMES 1
+
+/* Define if you have a working 'mmap' system call.  */
+/* #undef HAVE_MMAP */
+
+/* Define if system calls automatically restart after interruption
+   by a signal.  */
+/* #undef HAVE_RESTARTABLE_SYSCALLS */
+
+/* Define if your struct stat has st_blksize.  */
+/* #undef HAVE_ST_BLKSIZE */
+
+/* Define if your struct stat has st_blocks.  */
+/* #undef HAVE_ST_BLOCKS */
+
+/* Define if you have the strcoll function and it is properly defined.  */
+#define HAVE_STRCOLL 1
+
+/* Define if your struct stat has st_rdev.  */
+#define HAVE_ST_RDEV 1
+
+/* Define if you have the strftime function.  */
+#define HAVE_STRFTIME 1
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if your struct tm has tm_zone.  */
+/* #undef HAVE_TM_ZONE */
+
+/* Define if you don't have tm_zone but do have the external array
+   tzname.  */
+#define HAVE_TZNAME 1
+
+/* Define if you have <unistd.h>.  */
+#define HAVE_UNISTD_H 1
+
+/* Define if utime(file, NULL) sets file's timestamp to the present.  */
+/* #undef HAVE_UTIME_NULL */
+
+/* Define if you have the wait3 system call.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if on MINIX.  */
+/* #undef _MINIX */
+
+/* Define if your struct nlist has an n_un member.  */
+/* #undef NLIST_NAME_UNION */
+
+/* Define if you have <nlist.h>.  */
+/* #undef NLIST_STRUCT */
+
+/* Define if your C compiler doesn't accept -c and -o together.  */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+#define pid_t int
+
+/* Define if the system does not provide POSIX.1 features except
+   with this defined.  */
+/* #undef _POSIX_1_SOURCE */
+
+/* Define if you need to in order for stat and other things to work.  */
+/* #undef _POSIX_SOURCE */
+
+/* Define as the return type of signal handlers (int or void).  */
+#define RETSIGTYPE void
+
+/* Define if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#define STACK_DIRECTION -1
+
+/* Define if the 'S_IS*' macros in <sys/stat.h> do not work properly.  */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define if you have the ANSI C header files.  */
+#define STDC_HEADERS
+
+/* Define on System V Release 4.  */
+/* #undef SVR4 */
+
+/* Define if 'sys_siglist' is declared by <signal.h>.  */
+/* #undef SYS_SIGLIST_DECLARED */
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+#define uid_t int
+
+/* Define for Encore UMAX.  */
+/* #undef UMAX */
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+/* #undef UMAX4_3 */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "make"
+
+/* Version of this package (needed by automake) */
+#define VERSION "4.1"
+
+/* Define to the name of the SCCS 'get' command.  */
+#define SCCS_GET "get"
+
+/* Define this if the SCCS 'get' command understands the '-G<file>' option.  */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define this to enable job server support in GNU make.  */
+/* #undef MAKE_JOBSERVER */
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+/* #undef ST_MTIM_NSEC */
+
+/* Define this if the C library defines the variable 'sys_siglist'.  */
+/* #undef HAVE_SYS_SIGLIST */
+
+/* Define this if the C library defines the variable '_sys_siglist'.  */
+/* #undef HAVE__SYS_SIGLIST */
+
+/* Define this if you have the 'union wait' type in <sys/wait.h>.  */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define if you have the dup2 function.  */
+/* #undef HAVE_DUP2 */
+
+/* Define if you have the getcwd function.  */
+#define HAVE_GETCWD 1
+
+/* Define if you have the getgroups function.  */
+/* #undef HAVE_GETGROUPS */
+
+/* Define if you have the gethostbyname function.  */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define if you have the gethostname function.  */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define if you have the memmove function.  */
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the mktemp function.  */
+#define HAVE_MKTEMP 1
+
+/* Define if you have the psignal function.  */
+/* #undef HAVE_PSIGNAL */
+
+/* Define if you have the pstat_getdynamic function.  */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define if you have the setegid function.  */
+/* #undef HAVE_SETEGID */
+
+/* Define if you have the seteuid function.  */
+/* #undef HAVE_SETEUID */
+
+/* Define if you have the setlinebuf function.  */
+/* #undef HAVE_SETLINEBUF */
+
+/* Define if you have the setregid function.  */
+/* #undef HAVE_SETREGID */
+
+/* Define if you have the setreuid function.  */
+/* #undef HAVE_SETREUID */
+
+/* Define if you have the sigsetmask function.  */
+/* #undef HAVE_SIGSETMASK */
+
+/* Define if you have the socket function.  */
+/* #undef HAVE_SOCKET */
+
+/* Define to 1 if you have the strcasecmp function.  */
+/* #undef HAVE_STRCASECMP */
+
+/* Define to 1 if you have the strcmpi function.  */
+/* #undef HAVE_STRCMPI */
+
+/* Define to 1 if you have the stricmp function.  */
+/* #undef HAVE_STRICMP */
+
+/* Define if you have the strerror function.  */
+#define HAVE_STRERROR 1
+
+/* Define if you have the strsignal function.  */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define if you have the wait3 function.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if you have the waitpid function.  */
+/* #undef HAVE_WAITPID */
+
+/* Define if you have the <dirent.h> header file.  */
+#define HAVE_DIRENT_H 1
+
+/* Define if you have the <fcntl.h> header file.  */
+#define HAVE_FCNTL_H 1
+
+/* Define if you have the <limits.h> header file.  */
+#define HAVE_LIMITS_H 1
+
+/* Define if you have the <mach/mach.h> header file.  */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define if you have the <memory.h> header file.  */
+/* #undef HAVE_MEMORY_H */
+
+/* Define if you have the <ndir.h> header file.  */
+/* #undef HAVE_NDIR_H */
+
+/* Define if you have the <stdlib.h> header file.  */
+/* #undef HAVE_STDLIB_H */
+
+/* Define if you have the <string.h> header file.  */
+#define HAVE_STRING_H 1
+
+/* Define if you have the <sys/dir.h> header file.  */
+#define HAVE_SYS_DIR_H 1
+
+/* Define if you have the <sys/ndir.h> header file.  */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define if you have the <sys/param.h> header file.  */
+/* #undef HAVE_SYS_PARAM_H */
+
+/* Define if you have the <sys/timeb.h> header file.  */
+/* #undef HAVE_SYS_TIMEB_H */
+
+/* Define if you have the <sys/wait.h> header file.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if you have the <unistd.h> header file.  */
+#define HAVE_UNISTD_H 1
+
+/* Define if you have the dgc library (-ldgc).  */
+/* #undef HAVE_LIBDGC */
+
+/* Define if you have the kstat library (-lkstat).  */
+/* #undef HAVE_LIBKSTAT */
+
+/* Define to 1 if you have the `isatty' function. */
+/* #undef HAVE_ISATTY */
+
+/* Define to 1 if you have the `ttyname' function. */
+/* #undef HAVE_TTYNAME */
+
+/* Define if you have the sun library (-lsun).  */
+/* #undef HAVE_LIBSUN */
+
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
+
+/* Define for Case Insensitve behavior */
+#define HAVE_CASE_INSENSITIVE_FS
+
+/* Build host information. */
+#define MAKE_HOST "Amiga"
diff --git a/config.h-vms b/config.h-vms
new file mode 100644
index 0000000..d20953e
--- /dev/null
+++ b/config.h-vms
@@ -0,0 +1,432 @@
+/* config.h-vms. Generated by hand by Klaus Kämpf <kkaempf@rmi.de>      -*-C-*-
+
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* config.h.  Generated automatically by configure.  */
+/* config.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Pull in types.h here to get __CRTL_VER defined for old versions of the
+   compiler which don't define it. */
+#ifdef __DECC
+# include <types.h>
+#endif
+
+/* Define to 1 if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+/* #undef _ALL_SOURCE */
+#endif
+
+/* Define to 1 if NLS is requested.  */
+/* #undef ENABLE_NLS */
+
+/* Define as 1 if you have dcgettext.  */
+/* #undef HAVE_DCGETTEXT */
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
+/* #undef HAVE_GETTEXT */
+
+/* Embed GNU Guile support */
+/* #undef HAVE_GUILE */
+
+/* Define to 1 if your locale.h file contains LC_MESSAGES.  */
+/* #undef HAVE_LC_MESSAGES */
+
+/* Define to the installation directory for locales.  */
+#define LOCALEDIR ""
+
+/* Define as 1 if you have the stpcpy function.  */
+/* #undef HAVE_STPCPY */
+
+/* Define to 1 if the closedir function returns void instead of int.  */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+/* #undef DGUX */
+
+/* Define to 1 if the 'getloadavg' function needs to be run setuid or setgid.  */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to 'unsigned long' or 'unsigned long long'
+   if <inttypes.h> doesn't define.  */
+#define uintmax_t unsigned long
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+/* #undef gid_t */
+
+/* Define to 1 if you have alloca, as a function or macro.  */
+#define HAVE_ALLOCA 1
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).  */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define to 1 if you have the fdopen function.  */
+#define HAVE_FDOPEN 1
+
+/* Define to 1 if your system has a working fnmatch function.  */
+/* #undef HAVE_FNMATCH */
+
+/* Define to 1 if your system has its own 'getloadavg' function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define to 1 if you have the getmntent function.  */
+/* #undef HAVE_GETMNTENT */
+
+/* Define to 1 if the 'long double' type works.  */
+/* #undef HAVE_LONG_DOUBLE */
+
+/* Define to 1 if you support file names longer than 14 characters.  */
+#define HAVE_LONG_FILE_NAMES 1
+
+/* Define to 1 if you have a working 'mmap' system call.  */
+/* #undef HAVE_MMAP */
+
+/* Define to 1 if system calls automatically restart after interruption
+   by a signal.  */
+/* #undef HAVE_RESTARTABLE_SYSCALLS */
+
+/* Define to 1 if your struct stat has st_blksize.  */
+/* #undef HAVE_ST_BLKSIZE */
+
+/* Define to 1 if your struct stat has st_blocks.  */
+/* #undef HAVE_ST_BLOCKS */
+
+/* Define to 1 if you have the strcoll function and it is properly defined.  */
+/* #undef HAVE_STRCOLL */
+
+/* Define to 1 if you have the strncasecmp' function. */
+#if __CRTL_VER >= 70000000
+#define HAVE_STRNCASECMP 1
+#endif
+
+/* Define to 1 if your struct stat has st_rdev.  */
+/* #undef HAVE_ST_RDEV */
+
+/* Define to 1 if you have the strftime function.  */
+/* #undef HAVE_STRFTIME */
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define to 1 if your struct tm has tm_zone.  */
+/* #undef HAVE_TM_ZONE */
+
+/* Define to 1 if you don't have tm_zone but do have the external array
+   tzname.  */
+/* #undef HAVE_TZNAME */
+
+/* Define to 1 if you have <unistd.h>.  */
+#ifdef __DECC
+#define HAVE_UNISTD_H 1
+#endif
+
+/* Define to 1 if utime(file, NULL) sets file's timestamp to the present.  */
+/* #undef HAVE_UTIME_NULL */
+
+/* Define to 1 if you have the wait3 system call.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define to 1 if on MINIX.  */
+/* #undef _MINIX */
+
+/* Define to 1 if your struct nlist has an n_un member.  */
+/* #undef NLIST_NAME_UNION */
+
+/* Define to 1 if you have <nlist.h>.  */
+/* #undef NLIST_STRUCT */
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together.  */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+/* I assume types.h is available for all 5.0 cc/cxx compilers */
+#if __DECC_VER < 50090000
+#define pid_t int
+#endif
+
+/* Define to 1 if the system does not provide POSIX.1 features except
+   with this defined.  */
+/* #undef _POSIX_1_SOURCE */
+
+/* Define to 1 if you need to in order for stat and other things to work.  */
+/* #undef _POSIX_SOURCE */
+
+/* Define as the return type of signal handlers (int or void).  */
+#define RETSIGTYPE void
+
+/* Define to 1 if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown
+ */
+/* #undef STACK_DIRECTION */
+
+/* Define to 1 if the 'S_IS*' macros in <sys/stat.h> do not work properly.  */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files.  */
+/* #undef STDC_HEADERS */
+
+/* Define on System V Release 4.  */
+/* #undef SVR4 */
+
+/* Define to 1 if 'sys_siglist' is declared by <signal.h>.  */
+/* #undef SYS_SIGLIST_DECLARED */
+
+/* Define to 'int' if <sys/types.h> doesn't define.  */
+#if __DECC_VER < 50090000
+#define uid_t int
+#endif
+
+/* Define for Encore UMAX.  */
+/* #undef UMAX */
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+/* #undef UMAX4_3 */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "make"
+
+/* Version of this package (needed by automake) */
+#define VERSION "4.1"
+
+/* Define to the name of the SCCS 'get' command.  */
+/* #undef SCCS_GET */
+
+/* Define this if the SCCS 'get' command understands the '-G<file>' option.  */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define this to enable job server support in GNU make.  */
+/* #undef MAKE_JOBSERVER */
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+/* #undef ST_MTIM_NSEC */
+
+/* Define to 1 if the C library defines the variable 'sys_siglist'.  */
+/* #undefine HAVE_SYS_SIGLIST */
+
+/* Define to 1 if the C library defines the variable '_sys_siglist'.  */
+/* #undef HAVE__SYS_SIGLIST */
+
+/* Define to 1 if you have the 'union wait' type in <sys/wait.h>.  */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define to 1 if you have the dup2 function.  */
+#define HAVE_DUP2 1
+
+/* Define to 1 if you have the getcwd function.  */
+#define HAVE_GETCWD 1
+
+/* Define to 1 if you have the getgroups function.  */
+/* #undef HAVE_GETGROUPS */
+
+/* Define to 1 if you have the gethostbyname function.  */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define to 1 if you have the gethostname function.  */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define to 1 if you have the memmove function.  */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the mktemp function.  */
+#define HAVE_MKTEMP 1
+
+/* Define to 1 if you have the psignal function.  */
+/* #undef HAVE_PSIGNAL */
+
+/* Define to 1 if you have the pstat_getdynamic function.  */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 if you have the setegid function.  */
+/* #undef HAVE_SETEGID */
+
+/* Define to 1 if you have the seteuid function.  */
+/* #undef HAVE_SETEUID */
+
+/* Define to 1 if you have the setlinebuf function.  */
+/* #undef HAVE_SETLINEBUF */
+
+/* Define to 1 if you have the setregid function.  */
+/* #undefine HAVE_SETREGID */
+
+/* Define to 1 if you have the setreuid function.  */
+/* #define HAVE_SETREUID */
+
+/* Define to 1 if you have the sigsetmask function.  */
+#define HAVE_SIGSETMASK 1
+
+/* Define to 1 if you have the socket function.  */
+/* #undef HAVE_SOCKET */
+
+/* Define to 1 if you have the strcasecmp function.  */
+#define HAVE_STRCASECMP 1
+
+/* Define to 1 if you have the strcmpi function.  */
+/* #undef HAVE_STRCMPI */
+
+/* Define to 1 if you have the stricmp function.  */
+/* #undef HAVE_STRICMP */
+
+/* Define to 1 if you have the strerror function.  */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the strsignal function.  */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define to 1 if you have the wait3 function.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define to 1 if you have the waitpid function.  */
+/* #undef HAVE_WAITPID */
+
+/* Define to 1 if you have the <dirent.h> header file.  */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <fcntl.h> header file.  */
+#ifdef __DECC
+#define HAVE_FCNTL_H 1
+#endif
+
+/* Define to 1 if you have the <limits.h> header file.  */
+#define HAVE_LIMITS_H 1
+
+/* Define to 1 if you have the <mach/mach.h> header file.  */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define to 1 if you have the <memory.h> header file.  */
+/* #undef HAVE_MEMORY_H */
+
+/* Define to 1 if you have the <ndir.h> header file.  */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the <stdlib.h> header file.  */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the <string.h> header file.  */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/dir.h> header file.  */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file.  */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/param.h> header file.  */
+/* #undef HAVE_SYS_PARAM_H */
+
+/* Define to 1 if you have the <sys/timeb.h> header file.  */
+#ifndef __GNUC__
+#define HAVE_SYS_TIMEB_H 1
+#endif
+
+/* Define to 1 if you have the <sys/wait.h> header file.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define to 1 if you have the dgc library (-ldgc).  */
+/* #undef HAVE_LIBDGC */
+
+/* Define to 1 if you have the kstat library (-lkstat).  */
+/* #undef HAVE_LIBKSTAT *
+
+/* Define to 1 if you have the sun library (-lsun).  */
+/* #undef HAVE_LIBSUN */
+
+/* Define to 1 if you have the `isatty' function. */
+/* #undef HAVE_ISATTY */
+
+/* Define to 1 if you have the `ttyname' function. */
+/* #undef HAVE_TTYNAME */
+
+/* Use high resolution file timestamps if nonzero. */
+#define FILE_TIMESTAMP_HI_RES 0
+
+/* Define for case insensitve filenames */
+#define HAVE_CASE_INSENSITIVE_FS 1
+
+/* VMS specific, define it if you want to use case sensitive targets */
+/* #undef WANT_CASE_SENSITIVE_TARGETS */
+
+/* VMS specific, V7.0 has opendir() and friends, so it's undefined */
+/* If you want to use non-VMS code for opendir() etc. on V7.0 and greater
+   define the first or both macros AND change the compile command to get the
+   non-VMS versions linked: (prefix=(all,except=(opendir,...  */
+/* #undef HAVE_VMSDIR_H */
+/* #undef _DIRENT_HAVE_D_NAMLEN */
+
+/* On older systems without 7.0 backport of CRTL use non-VMS code for opendir() etc. */
+#if __CRTL_VER < 70000000
+# define HAVE_VMSDIR_H 1
+#endif
+
+#if defined(HAVE_VMSDIR_H) && defined(HAVE_DIRENT_H)
+#undef HAVE_DIRENT_H
+#endif
+
+#define HAVE_STDLIB_H 1
+#define INCLUDEDIR "sys$sysroot:[syslib]"
+#define LIBDIR "sys$sysroot:[syslib]"
+
+/* Don't use RTL functions of OpenVMS */
+#ifdef __DECC
+#include <stdio.h>
+#include <unistd.h>
+#define getopt   gnu_getopt
+#define optarg   gnu_optarg
+#define optopt   gnu_optopt
+#define optind   gnu_optind
+#define opterr   gnu_opterr
+#define globfree gnu_globfree
+#define glob     gnu_glob
+#endif
+
+/* Define if using alloca.c.  */
+/* #undef C_ALLOCA */
+/* maybe this should be placed into makeint.h */
+#if     defined(__VAX) && defined(__DECC)
+#define alloca(n)       __ALLOCA(n)
+#endif
+
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
+
+/* Define to 1 to write even short single-line actions into a VMS/DCL command
+   file; this also enables exporting make environment variables into the
+   (sub-)process, which executes the action.
+   The usual make rules apply whether a shell variable - here a DCL symbol or
+   VMS logical [see CRTL getenv()] - is added to the make environment and
+   is exported. */
+#define USE_DCL_COM_FILE 1
+
+/* Build host information. */
+#define MAKE_HOST "VMS"
diff --git a/config.h.W32 b/config.h.W32
new file mode 100644
index 0000000..a525520
--- /dev/null
+++ b/config.h.W32
@@ -0,0 +1,532 @@
+/* config.h.W32 -- hand-massaged config.h file for Windows builds       -*-C-*-
+
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Suppress some Visual C++ warnings.
+   Maybe after the code cleanup for ISO C we can remove some/all of these.  */
+#if _MSC_VER > 1000
+# pragma warning(disable:4100) /* unreferenced formal parameter */
+# pragma warning(disable:4102) /* unreferenced label */
+# pragma warning(disable:4127) /* conditional expression is constant */
+# pragma warning(disable:4131) /* uses old-style declarator */
+# pragma warning(disable:4702) /* unreachable code */
+# define _CRT_SECURE_NO_WARNINGS  /* function or variable may be unsafe */
+# define _CRT_NONSTDC_NO_WARNINGS /* functions w/o a leading underscore */
+#endif
+
+/* Define to 1 if the 'closedir' function returns void instead of 'int'. */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to one of '_getb67', 'GETB67', 'getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for 'alloca.c' support on those systems.
+   */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define to 1 if using 'alloca.c'. */
+/* #undef C_ALLOCA */
+
+/* Define to 1 if using 'getloadavg.c'. */
+#define C_GETLOADAVG 1
+
+/* Define to 1 for DGUX with <sys/dg_sys_info.h>. */
+/* #undef DGUX */
+
+/* Define to 1 if translation of program messages to the user's native
+   language is requested. */
+/* #undef ENABLE_NLS */
+
+/* Use high resolution file timestamps if nonzero. */
+#define FILE_TIMESTAMP_HI_RES 0
+
+/* Define to 1 if the 'getloadavg' function needs to be run setuid or setgid.
+   */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to 1 if you have 'alloca', as a function or macro. */
+#define HAVE_ALLOCA 1
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define to 1 if you have the 'atexit' function. */
+#define HAVE_ATEXIT 1
+
+/* Use case insensitive file names */
+/* #undef HAVE_CASE_INSENSITIVE_FS */
+
+/* Define to 1 if you have the clock_gettime function. */
+/* #undef HAVE_CLOCK_GETTIME */
+
+/* Embed GNU Guile support.  Windows build sets this on the
+   compilation command line.  */
+/* #undef HAVE_GUILE */
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+   */
+/* #undef HAVE_DCGETTEXT */
+
+/* Define to 1 if you have the declaration of 'bsd_signal', and to 0 if you
+   don't. */
+#define HAVE_DECL_BSD_SIGNAL 0
+
+/* Define to 1 if you have the declaration of 'sys_siglist', and to 0 if you
+   don't. */
+#define HAVE_DECL_SYS_SIGLIST 0
+
+/* Define to 1 if you have the declaration of '_sys_siglist', and to 0 if you
+   don't. */
+#define HAVE_DECL__SYS_SIGLIST 0
+
+/* Define to 1 if you have the declaration of '__sys_siglist', and to 0 if you
+   don't. */
+#define HAVE_DECL___SYS_SIGLIST 0
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines 'DIR'.
+   */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <direct.h> header file, and it defines getcwd()
+   and chdir().
+   */
+#if (defined(_MSC_VER) || defined(__BORLANDC__)) && !defined(__INTERIX)
+# define HAVE_DIRECT_H 1
+#endif
+
+/* Use platform specific coding */
+#define HAVE_DOS_PATHS 1
+
+/* Define to 1 if you have the 'dup2' function. */
+#define HAVE_DUP2 1
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#define HAVE_FCNTL_H 1
+
+/* Define to 1 if you have the 'fdopen' function. */
+#ifdef __MINGW32__
+#define HAVE_FDOPEN 1
+#endif
+
+/* Define to 1 if you have the 'fileno' function. */
+#define HAVE_FILENO 1
+
+/* Define to 1 if you have the 'getcwd' function.  */
+#define HAVE_GETCWD 1
+
+/* Define to 1 if you have the 'getgroups' function. */
+/* #undef HAVE_GETGROUPS */
+
+/* Define to 1 if you have the 'gethostbyname' function. */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define to 1 if you have the 'gethostname' function. */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define to 1 if you have the 'getloadavg' function. */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define to 1 if you have the 'getrlimit' function. */
+/* #undef HAVE_GETRLIMIT */
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+/* #undef HAVE_GETTEXT */
+
+/* Define to 1 if you have a standard gettimeofday function */
+#ifdef __MINGW32__
+#define HAVE_GETTIMEOFDAY 1
+#endif
+
+/* Define if you have the iconv() function. */
+/* #undef HAVE_ICONV */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#ifdef __MINGW32__
+#define HAVE_INTTYPES_H 1
+#endif
+
+/* Define to 1 if you have the 'dgc' library (-ldgc). */
+/* #undef HAVE_LIBDGC */
+
+/* Define to 1 if you have the 'kstat' library (-lkstat). */
+/* #undef HAVE_LIBKSTAT */
+
+/* Define to 1 if you have the <limits.h> header file. */
+#define HAVE_LIMITS_H 1
+
+/* Define to 1 if you have the <locale.h> header file. */
+/*#define HAVE_LOCALE_H 1*/
+
+/* Define to 1 if you have the 'lstat' function. */
+/* #undef HAVE_LSTAT */
+
+/* Define to 1 if you have the <mach/mach.h> header file. */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the 'mkstemp' function. */
+/* #undef HAVE_MKSTEMP */
+
+/* Define to 1 if you have the 'mktemp' function. */
+#define HAVE_MKTEMP 1
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines 'DIR'. */
+/* #undef HAVE_NDIR_H */
+
+/* Define to 1 if you have the <nlist.h> header file. */
+/* #undef HAVE_NLIST_H */
+
+/* Define to 1 if you have the 'pipe' function. */
+/* #undef HAVE_PIPE */
+
+/* Define to 1 if you have the 'pstat_getdynamic' function. */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define to 1 if you have the 'readlink' function. */
+/* #undef HAVE_READLINK */
+
+/* Define to 1 if you have the 'realpath' function. */
+/* #undef HAVE_REALPATH */
+
+/* Define to 1 if <signal.h> defines the SA_RESTART constant. */
+/* #undef HAVE_SA_RESTART */
+
+/* Define to 1 if you have the 'setegid' function. */
+/* #undef HAVE_SETEGID */
+
+/* Define to 1 if you have the 'seteuid' function. */
+/* #undef HAVE_SETEUID */
+
+/* Define to 1 if you have the 'setlinebuf' function. */
+/* #undef HAVE_SETLINEBUF */
+
+/* Define to 1 if you have the 'setlocale' function. */
+/*#define HAVE_SETLOCALE 1*/
+
+/* Define to 1 if you have the 'setregid' function. */
+/* #undef HAVE_SETREGID */
+
+/* Define to 1 if you have the 'setreuid' function. */
+/* #undef HAVE_SETREUID */
+
+/* Define to 1 if you have the 'setrlimit' function. */
+/* #undef HAVE_SETRLIMIT */
+
+/* Define to 1 if you have the 'setvbuf' function. */
+#define HAVE_SETVBUF 1
+
+/* Define to 1 if you have the 'sigaction' function. */
+/* #undef HAVE_SIGACTION */
+
+/* Define to 1 if you have the 'sigsetmask' function. */
+/* #undef HAVE_SIGSETMASK */
+
+/* Define to 1 if you have the 'socket' function. */
+/* #undef HAVE_SOCKET */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#ifdef __MINGW32__
+#define HAVE_STDINT_H 1
+#endif
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the 'strcasecmp' function. */
+#ifdef __MINGW32__
+#define HAVE_STRCASECMP 1
+#endif
+
+/* Define to 1 if you have the 'strcmpi' function. */
+#define HAVE_STRCMPI 1
+
+/* Define to 1 if you have the 'strcoll' function and it is properly defined.
+   */
+#define HAVE_STRCOLL 1
+
+/* Define to 1 if you have the 'strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define to 1 if you have the 'strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the 'stricmp' function. */
+#define HAVE_STRICMP 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+/* #define HAVE_STRINGS_H 1 */
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the 'strncasecmp' function. */
+#ifdef __MINGW32__
+#define HAVE_STRNCASECMP 1
+#endif
+
+/* Define to 1 if you have the 'strncmpi' function. */
+/* #undef HAVE_STRNCMPI */
+
+/* Define to 1 if you have the 'strndup' function. */
+/* #undef HAVE_STRNDUP */
+
+/* Define to 1 if you have the 'strnicmp' function. */
+#ifdef __MINGW32__
+#define HAVE_STRNICMP 1
+#endif
+
+/* Define to 1 if you have the 'strsignal' function. */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define to 1 if you have the `isatty' function. */
+#define HAVE_ISATTY 1
+
+/* Define to 1 if you have the `ttyname' function. */
+#define HAVE_TTYNAME 1
+char *ttyname (int);
+
+/* Define to 1 if 'n_un.n_name' is a member of 'struct nlist'. */
+/* #undef HAVE_STRUCT_NLIST_N_UN_N_NAME */
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines 'DIR'.
+   */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines 'DIR'.
+   */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#ifdef __MINGW32__
+#define HAVE_SYS_PARAM_H 1
+#endif
+
+/* Define to 1 if you have the <sys/resource.h> header file. */
+/* #undef HAVE_SYS_RESOURCE_H */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/timeb.h> header file. */
+#define HAVE_SYS_TIMEB_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#ifdef __MINGW32__
+#define HAVE_SYS_TIME_H 1
+#endif
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define to 1 if you have the \'union wait' type in <sys/wait.h>. */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#ifdef __MINGW32__
+#define HAVE_UNISTD_H 1
+#endif
+
+/* Define to 1 if you have the 'wait3' function. */
+/* #undef HAVE_WAIT3 */
+
+/* Define to 1 if you have the 'waitpid' function. */
+/* #undef HAVE_WAITPID */
+
+/* Build host information. */
+#define MAKE_HOST "Windows32"
+
+/* Define to 1 to enable job server support in GNU make. */
+#define MAKE_JOBSERVER 1
+
+/* Define to 1 to enable 'load' support in GNU make. */
+#define MAKE_LOAD 1
+
+/* Define to 1 to enable symbolic link timestamp checking. */
+/* #undef MAKE_SYMLINKS */
+
+/* Define to 1 if your 'struct nlist' has an 'n_un' member. Obsolete, depend
+   on 'HAVE_STRUCT_NLIST_N_UN_N_NAME */
+/* #undef NLIST_NAME_UNION */
+
+/* Define to 1 if struct nlist.n_name is a pointer rather than an array. */
+/* #undef NLIST_STRUCT */
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "make"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "bug-make@gnu.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "GNU make"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL "http://www.gnu.org/software/make/"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.1"
+
+/* Define to the character that separates directories in PATH. */
+#define PATH_SEPARATOR_CHAR ';'
+
+/* Define as the return type of signal handlers ('int' or 'void'). */
+#define RETSIGTYPE void
+
+/* Define to the name of the SCCS 'get' command. */
+#define SCCS_GET "echo no sccs get"
+
+/* Define this if the SCCS 'get' command understands the '-G<file>' option. */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define to 1 if the 'setvbuf' function takes the buffering type as its
+   second argument and the buffer pointer as the third, as on System V before
+   release 3. */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run time.
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown */
+/* #undef STACK_DIRECTION */
+
+/* Define to 1 if the 'S_IS*' macros in <sys/stat.h> do not work properly. */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define if struct stat contains a nanoseconds field */
+/* #undef ST_MTIM_NSEC */
+
+/* Define to 1 on System V Release 4. */
+/* #undef SVR4 */
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#ifdef __MINGW32__
+#define TIME_WITH_SYS_TIME 1
+#endif
+
+/* Define to 1 for Encore UMAX. */
+/* #undef UMAX */
+
+/* Define to 1 for Encore UMAX 4.3 that has <inq_status/cpustats.h> instead of
+   <sys/cpustats.h>. */
+/* #undef UMAX4_3 */
+
+/* Version number of package */
+#define VERSION "4.1"
+
+/* Define if using the dmalloc debugging malloc package */
+/* #undef WITH_DMALLOC */
+
+/* Define to 1 if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+/* # undef _ALL_SOURCE */
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to 1 if on MINIX. */
+/* #undef _MINIX */
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+/* #undef _POSIX_1_SOURCE */
+
+/* Define to 1 if you need to in order for 'stat' and other things to work. */
+/* #undef _POSIX_SOURCE */
+
+/* Define to empty if 'const' does not conform to ANSI C. */
+/* #undef const */
+
+#include <sys/types.h>
+
+/* Define to 'int' if <sys/types.h> doesn't define. */
+#define gid_t int
+
+/* Define to 'int' if <sys/types.h> does not define. */
+/* GCC 4.x reportedly defines pid_t.  */
+#ifndef _PID_T_
+#ifdef _WIN64
+#define pid_t __int64
+#else
+#define pid_t int
+#endif
+#endif
+
+/* Define to 'int' if <sys/types.h> doesn't define. */
+#define uid_t int
+
+/* Define uintmax_t if not defined in <stdint.h> or <inttypes.h>. */
+#if !HAVE_STDINT_H && !HAVE_INTTYPES_H
+#define uintmax_t unsigned long
+#endif
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define to the installation directory for locales.  */
+#define LOCALEDIR ""
+
+/*
+ * Refer to README.W32 for info on the following settings
+ */
+
+
+/*
+ * If you have a shell that does not grok 'sh -c quoted-command-line'
+ * correctly, you need this setting. Please see below for specific
+ * shell support.
+ */
+/*#define BATCH_MODE_ONLY_SHELL 1 */
+
+/*
+ * Define if you have the Cygnus "Cygwin" GNU Windows32 tool set.
+ * Do NOT define BATCH_MODE_ONLY_SHELL if you define HAVE_CYGWIN_SHELL
+ */
+/*#define HAVE_CYGWIN_SHELL 1 */
+
+/*
+ * Define if you have the MKS tool set or shell. Do NOT define
+ * BATCH_MODE_ONLY_SHELL if you define HAVE_MKS_SHELL
+ */
+/*#define HAVE_MKS_SHELL 1 */
+
+/*
+ * Enforce the mutual exclusivity restriction.
+ */
+#ifdef HAVE_MKS_SHELL
+#undef BATCH_MODE_ONLY_SHELL
+#endif
+
+#ifdef HAVE_CYGWIN_SHELL
+#undef BATCH_MODE_ONLY_SHELL
+#endif
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..664fbc2
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,469 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if the `closedir' function returns void instead of `int'. */
+#undef CLOSEDIR_VOID
+
+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for `alloca.c' support on those systems.
+   */
+#undef CRAY_STACKSEG_END
+
+/* Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
+
+/* Define to 1 if using `getloadavg.c'. */
+#undef C_GETLOADAVG
+
+/* Define to 1 for DGUX with <sys/dg_sys_info.h>. */
+#undef DGUX
+
+/* Define to 1 if translation of program messages to the user's native
+   language is requested. */
+#undef ENABLE_NLS
+
+/* Use high resolution file timestamps if nonzero. */
+#undef FILE_TIMESTAMP_HI_RES
+
+/* Define to 1 if the `getloadavg' function needs to be run setuid or setgid.
+   */
+#undef GETLOADAVG_PRIVILEGED
+
+/* Define to 1 if you have `alloca', as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+#undef HAVE_ALLOCA_H
+
+/* Define to 1 if you have the `atexit' function. */
+#undef HAVE_ATEXIT
+
+/* Use case insensitive file names */
+#undef HAVE_CASE_INSENSITIVE_FS
+
+/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
+   CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
+   the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
+/* Define to 1 if you have the clock_gettime function. */
+#undef HAVE_CLOCK_GETTIME
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+   */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the declaration of `bsd_signal', and to 0 if you
+   don't. */
+#undef HAVE_DECL_BSD_SIGNAL
+
+/* Define to 1 if you have the declaration of `dlerror', and to 0 if you
+   don't. */
+#undef HAVE_DECL_DLERROR
+
+/* Define to 1 if you have the declaration of `dlopen', and to 0 if you don't.
+   */
+#undef HAVE_DECL_DLOPEN
+
+/* Define to 1 if you have the declaration of `dlsym', and to 0 if you don't.
+   */
+#undef HAVE_DECL_DLSYM
+
+/* Define to 1 if you have the declaration of `sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SYS_SIGLIST
+
+/* Define to 1 if you have the declaration of `_sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL__SYS_SIGLIST
+
+/* Define to 1 if you have the declaration of `__sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL___SYS_SIGLIST
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_DIRENT_H
+
+/* Use platform specific coding */
+#undef HAVE_DOS_PATHS
+
+/* Define to 1 if you have the `dup' function. */
+#undef HAVE_DUP
+
+/* Define to 1 if you have the `dup2' function. */
+#undef HAVE_DUP2
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the `fdopen' function. */
+#undef HAVE_FDOPEN
+
+/* Define to 1 if you have the `fileno' function. */
+#undef HAVE_FILENO
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getgroups' function. */
+#undef HAVE_GETGROUPS
+
+/* Define to 1 if you have the `gethostbyname' function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define to 1 if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define to 1 if you have the `getloadavg' function. */
+#undef HAVE_GETLOADAVG
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define to 1 if you have a standard gettimeofday function */
+#undef HAVE_GETTIMEOFDAY
+
+/* Embed GNU Guile support */
+#undef HAVE_GUILE
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `isatty' function. */
+#undef HAVE_ISATTY
+
+/* Define to 1 if you have the `dgc' library (-ldgc). */
+#undef HAVE_LIBDGC
+
+/* Define to 1 if you have the `kstat' library (-lkstat). */
+#undef HAVE_LIBKSTAT
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `lstat' function. */
+#undef HAVE_LSTAT
+
+/* Define to 1 if you have the <mach/mach.h> header file. */
+#undef HAVE_MACH_MACH_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mkstemp' function. */
+#undef HAVE_MKSTEMP
+
+/* Define to 1 if you have the `mktemp' function. */
+#undef HAVE_MKTEMP
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `pipe' function. */
+#undef HAVE_PIPE
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+#undef HAVE_PSTAT_GETDYNAMIC
+
+/* Define to 1 if you have the `readlink' function. */
+#undef HAVE_READLINK
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if <signal.h> defines the SA_RESTART constant. */
+#undef HAVE_SA_RESTART
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlocale' function. */
+#undef HAVE_SETLOCALE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if you have the `sigsetmask' function. */
+#undef HAVE_SIGSETMASK
+
+/* Define to 1 if you have the `socket' function. */
+#undef HAVE_SOCKET
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#undef HAVE_STRCASECMP
+
+/* Define to 1 if you have the `strcmpi' function. */
+#undef HAVE_STRCMPI
+
+/* Define to 1 if you have the `strcoll' function and it is properly defined.
+   */
+#undef HAVE_STRCOLL
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `stricmp' function. */
+#undef HAVE_STRICMP
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strncasecmp' function. */
+#undef HAVE_STRNCASECMP
+
+/* Define to 1 if you have the `strncmpi' function. */
+#undef HAVE_STRNCMPI
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnicmp' function. */
+#undef HAVE_STRNICMP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if `n_un.n_name' is a member of `struct nlist'. */
+#undef HAVE_STRUCT_NLIST_N_UN_N_NAME
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/resource.h> header file. */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/timeb.h> header file. */
+#undef HAVE_SYS_TIMEB_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the `ttyname' function. */
+#undef HAVE_TTYNAME
+
+/* Define to 1 if you have the 'union wait' type in <sys/wait.h>. */
+#undef HAVE_UNION_WAIT
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `wait3' function. */
+#undef HAVE_WAIT3
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Build host information. */
+#undef MAKE_HOST
+
+/* Define to 1 to enable job server support in GNU make. */
+#undef MAKE_JOBSERVER
+
+/* Define to 1 to enable 'load' support in GNU make. */
+#undef MAKE_LOAD
+
+/* Define to 1 to enable symbolic link timestamp checking. */
+#undef MAKE_SYMLINKS
+
+/* Define to 1 if your `struct nlist' has an `n_un' member. Obsolete, depend
+   on `HAVE_STRUCT_NLIST_N_UN_N_NAME */
+#undef NLIST_NAME_UNION
+
+/* Define to 1 if struct nlist.n_name is a pointer rather than an array. */
+#undef NLIST_STRUCT
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the character that separates directories in PATH. */
+#undef PATH_SEPARATOR_CHAR
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to the name of the SCCS 'get' command. */
+#undef SCCS_GET
+
+/* Define to 1 if the SCCS 'get' command understands the '-G<file>' option. */
+#undef SCCS_GET_MINUS_G
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at runtime.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown */
+#undef STACK_DIRECTION
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+#undef STAT_MACROS_BROKEN
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if struct stat contains a nanoseconds field */
+#undef ST_MTIM_NSEC
+
+/* Define to 1 on System V Release 4. */
+#undef SVR4
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 for Encore UMAX. */
+#undef UMAX
+
+/* Define to 1 for Encore UMAX 4.3 that has <inq_status/cpustats.h> instead of
+   <sys/cpustats.h>. */
+#undef UMAX4_3
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Use platform specific coding */
+#undef WINDOWS32
+
+/* Define if using the dmalloc debugging malloc package */
+#undef WITH_DMALLOC
+
+/* Enable large inode numbers on Mac OS X 10.5.  */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef gid_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef uid_t
+
+/* Define uintmax_t if not defined in <stdint.h> or <inttypes.h>. */
+#undef uintmax_t
diff --git a/config/Makefile.am b/config/Makefile.am
new file mode 100644
index 0000000..396c234
--- /dev/null
+++ b/config/Makefile.am
@@ -0,0 +1,18 @@
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Autoconf / automake know how to handle this directory.
diff --git a/config/Makefile.in b/config/Makefile.in
new file mode 100644
index 0000000..8ebc4fd
--- /dev/null
+++ b/config/Makefile.in
@@ -0,0 +1,455 @@
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = config
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ar-lib \
+	compile config.guess config.rpath config.sub depcomp \
+	install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign config/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am
+
+
+# Autoconf / automake know how to handle this directory.
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/config/ar-lib b/config/ar-lib
new file mode 100755
index 0000000..fe2301e
--- /dev/null
+++ b/config/ar-lib
@@ -0,0 +1,270 @@
+#! /bin/sh
+# Wrapper for Microsoft lib.exe
+
+me=ar-lib
+scriptversion=2012-03-01.08; # UTC
+
+# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Written by Peter Rosin <peda@lysator.liu.se>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+
+# func_error message
+func_error ()
+{
+  echo "$me: $1" 1>&2
+  exit 1
+}
+
+file_conv=
+
+# func_file_conv build_file
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv in
+	mingw)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_at_file at_file operation archive
+# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
+# for each of them.
+# When interpreting the content of the @FILE, do NOT use func_file_conv,
+# since the user would need to supply preconverted file names to
+# binutils ar, at least for MinGW.
+func_at_file ()
+{
+  operation=$2
+  archive=$3
+  at_file_contents=`cat "$1"`
+  eval set x "$at_file_contents"
+  shift
+
+  for member
+  do
+    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
+  done
+}
+
+case $1 in
+  '')
+     func_error "no command.  Try '$0 --help' for more information."
+     ;;
+  -h | --h*)
+    cat <<EOF
+Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
+
+Members may be specified in a file named with @FILE.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "$me, version $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test $# -lt 3; then
+  func_error "you must specify a program, an action and an archive"
+fi
+
+AR=$1
+shift
+while :
+do
+  if test $# -lt 2; then
+    func_error "you must specify a program, an action and an archive"
+  fi
+  case $1 in
+    -lib | -LIB \
+    | -ltcg | -LTCG \
+    | -machine* | -MACHINE* \
+    | -subsystem* | -SUBSYSTEM* \
+    | -verbose | -VERBOSE \
+    | -wx* | -WX* )
+      AR="$AR $1"
+      shift
+      ;;
+    *)
+      action=$1
+      shift
+      break
+      ;;
+  esac
+done
+orig_archive=$1
+shift
+func_file_conv "$orig_archive"
+archive=$file
+
+# strip leading dash in $action
+action=${action#-}
+
+delete=
+extract=
+list=
+quick=
+replace=
+index=
+create=
+
+while test -n "$action"
+do
+  case $action in
+    d*) delete=yes  ;;
+    x*) extract=yes ;;
+    t*) list=yes    ;;
+    q*) quick=yes   ;;
+    r*) replace=yes ;;
+    s*) index=yes   ;;
+    S*)             ;; # the index is always updated implicitly
+    c*) create=yes  ;;
+    u*)             ;; # TODO: don't ignore the update modifier
+    v*)             ;; # TODO: don't ignore the verbose modifier
+    *)
+      func_error "unknown action specified"
+      ;;
+  esac
+  action=${action#?}
+done
+
+case $delete$extract$list$quick$replace,$index in
+  yes,* | ,yes)
+    ;;
+  yesyes*)
+    func_error "more than one action specified"
+    ;;
+  *)
+    func_error "no action specified"
+    ;;
+esac
+
+if test -n "$delete"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  for member
+  do
+    case $1 in
+      @*)
+        func_at_file "${1#@}" -REMOVE "$archive"
+        ;;
+      *)
+        func_file_conv "$1"
+        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
+        ;;
+    esac
+  done
+
+elif test -n "$extract"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  if test $# -gt 0; then
+    for member
+    do
+      case $1 in
+        @*)
+          func_at_file "${1#@}" -EXTRACT "$archive"
+          ;;
+        *)
+          func_file_conv "$1"
+          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
+          ;;
+      esac
+    done
+  else
+    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    do
+      $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
+    done
+  fi
+
+elif test -n "$quick$replace"; then
+  if test ! -f "$orig_archive"; then
+    if test -z "$create"; then
+      echo "$me: creating $orig_archive"
+    fi
+    orig_archive=
+  else
+    orig_archive=$archive
+  fi
+
+  for member
+  do
+    case $1 in
+    @*)
+      func_file_conv "${1#@}"
+      set x "$@" "@$file"
+      ;;
+    *)
+      func_file_conv "$1"
+      set x "$@" "$file"
+      ;;
+    esac
+    shift
+    shift
+  done
+
+  if test -n "$orig_archive"; then
+    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
+  else
+    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
+  fi
+
+elif test -n "$list"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  $AR -NOLOGO -LIST "$archive" || exit $?
+fi
diff --git a/config/compile b/config/compile
new file mode 100755
index 0000000..531136b
--- /dev/null
+++ b/config/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/config.guess b/config/config.guess
new file mode 100644
index 0000000..1f5c50c
--- /dev/null
+++ b/config/config.guess
@@ -0,0 +1,1420 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-03-23'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		    grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/config.rpath b/config/config.rpath
new file mode 100755
index 0000000..17298f2
--- /dev/null
+++ b/config/config.rpath
@@ -0,0 +1,672 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2010 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This file is free software; the Free Software Foundation gives
+#   unlimited permission to copy and/or distribute it, with or without
+#   modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+#   than 256 bytes, otherwise the compiler driver will dump core. The only
+#   known workaround is to choose shorter directory names for the build
+#   directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix*)
+      wl='-Wl,'
+      ;;
+    darwin*)
+      case $cc_basename in
+        xlc*)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6* | nonstopux*)
+      wl='-Wl,'
+      ;;
+    newsos6)
+      ;;
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+        ecc*)
+          wl='-Wl,'
+          ;;
+        icc* | ifort*)
+          wl='-Wl,'
+          ;;
+        lf95*)
+          wl='-Wl,'
+          ;;
+        pgcc | pgf77 | pgf90)
+          wl='-Wl,'
+          ;;
+        ccc*)
+          wl='-Wl,'
+          ;;
+        como)
+          wl='-lopt='
+          ;;
+        *)
+          case `$CC -V 2>&1 | sed 5q` in
+            *Sun\ C*)
+              wl='-Wl,'
+              ;;
+          esac
+          ;;
+      esac
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    rdos*)
+      ;;
+    solaris*)
+      wl='-Wl,'
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      wl='-Wl,'
+      ;;
+    sysv4*MP*)
+      ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
+    unicos*)
+      wl='-Wl,'
+      ;;
+    uts4*)
+      ;;
+  esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # Set some defaults for GNU ld with shared library support. These
+  # are reset later if shared libraries are not supported. Putting them
+  # here allows them to be overridden if necessary.
+  # Unlike libtool, we use -rpath here, not --rpath, since the documented
+  # option of GNU ld is called -rpath, not --rpath.
+  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  case "$host_os" in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        ld_shlibs=no
+      fi
+      ;;
+    amigaos*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we cannot use
+      # them.
+      ld_shlibs=no
+      ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      ;;
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    netbsd*)
+      ;;
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+          ld_shlibs=no
+          ;;
+        *)
+          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+          else
+            ld_shlibs=no
+          fi
+          ;;
+      esac
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = no; then
+    hardcode_libdir_flag_spec=
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+          ;;
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            :
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+          ;;
+        esac
+      fi
+      # Begin _LT_AC_SYS_LIBPATH_AIX.
+      echo 'int main () { return 0; }' > conftest.c
+      ${CC} ${LDFLAGS} conftest.c -o conftest
+      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      if test -z "$aix_libpath"; then
+        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      fi
+      if test -z "$aix_libpath"; then
+        aix_libpath="/usr/lib:/lib"
+      fi
+      rm -f conftest.c conftest
+      # End _LT_AC_SYS_LIBPATH_AIX.
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        fi
+      fi
+      ;;
+    amigaos*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+    bsdi[45]*)
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=no
+      if test "$GCC" = yes ; then
+        :
+      else
+        case $cc_basename in
+          xlc*)
+            ;;
+          *)
+            ld_shlibs=no
+            ;;
+        esac
+      fi
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+    freebsd2.2*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    freebsd2*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd* | dragonfly*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      ;;
+    hpux10*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        hardcode_direct=yes
+        # hardcode_minus_L: Not really in the search PATH,
+        # but as the default location of the library.
+        hardcode_minus_L=yes
+      fi
+      ;;
+    hpux11*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct=no
+            ;;
+          *)
+            hardcode_direct=yes
+            # hardcode_minus_L: Not really in the search PATH,
+            # but as the default location of the library.
+            hardcode_minus_L=yes
+            ;;
+        esac
+      fi
+      ;;
+    irix5* | irix6* | nonstopux*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      case $host_vendor in
+        sni)
+          hardcode_direct=yes # is this really true???
+          ;;
+        siemens)
+          hardcode_direct=no
+          ;;
+        motorola)
+          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+          ;;
+      esac
+      ;;
+    sysv4.3*)
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      ;;
+    sysv5* | sco3.2v5* | sco5v6*)
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+  aix3*)
+    library_names_spec='$libname.a'
+    ;;
+  aix[4-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  amigaos*)
+    library_names_spec='$libname.a'
+    ;;
+  beos*)
+    library_names_spec='$libname$shrext'
+    ;;
+  bsdi[45]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  cygwin* | mingw* | pw32* | cegcc*)
+    shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
+    ;;
+  darwin* | rhapsody*)
+    shrext=.dylib
+    library_names_spec='$libname$shrext'
+    ;;
+  dgux*)
+    library_names_spec='$libname$shrext'
+    ;;
+  freebsd1*)
+    ;;
+  freebsd* | dragonfly*)
+    case "$host_os" in
+      freebsd[123]*)
+        library_names_spec='$libname$shrext$versuffix' ;;
+      *)
+        library_names_spec='$libname$shrext' ;;
+    esac
+    ;;
+  gnu*)
+    library_names_spec='$libname$shrext'
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    case $host_cpu in
+      ia64*)
+        shrext=.so
+        ;;
+      hppa*64*)
+        shrext=.sl
+        ;;
+      *)
+        shrext=.sl
+        ;;
+    esac
+    library_names_spec='$libname$shrext'
+    ;;
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
+    case "$host_os" in
+      irix5* | nonstopux*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    ;;
+  linux*oldld* | linux*aout* | linux*coff*)
+    ;;
+  linux* | k*bsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  netbsd*)
+    library_names_spec='$libname$shrext'
+    ;;
+  newsos6)
+    library_names_spec='$libname$shrext'
+    ;;
+  nto-qnx*)
+    library_names_spec='$libname$shrext'
+    ;;
+  openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  os2*)
+    libname_spec='$name'
+    shrext=.dll
+    library_names_spec='$libname.a'
+    ;;
+  osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
+    ;;
+  rdos*)
+    ;;
+  solaris*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv4*MP*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
+    ;;
+  uts4*)
+    library_names_spec='$libname$shrext'
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/config/config.sub b/config/config.sub
new file mode 100644
index 0000000..d4c8338
--- /dev/null
+++ b/config/config.sub
@@ -0,0 +1,1805 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-09-26'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| k1om \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 | or1k | or1knd | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| riscv32 | riscv64 \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| k1om-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| or1k*-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/depcomp b/config/depcomp
new file mode 100755
index 0000000..4ebd5b3
--- /dev/null
+++ b/config/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/dospaths.m4 b/config/dospaths.m4
new file mode 100644
index 0000000..92fb540
--- /dev/null
+++ b/config/dospaths.m4
@@ -0,0 +1,33 @@
+# Test if the system uses DOS-style pathnames (drive specs and backslashes)
+# By Paul Smith <psmith@gnu.org>.  Based on dos.m4 by Jim Meyering.
+#
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AC_DEFUN([pds_AC_DOS_PATHS], [
+  AC_CACHE_CHECK([whether system uses MSDOS-style paths], [ac_cv_dos_paths], [
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__ && !defined __EMX__ && !defined __MSYS__ && !defined __CYGWIN__
+neither MSDOS nor Windows nor OS2
+#endif
+]])],
+        [ac_cv_dos_paths=yes],
+        [ac_cv_dos_paths=no])])
+
+  AS_IF([test x"$ac_cv_dos_paths" = xyes],
+  [ AC_DEFINE_UNQUOTED([HAVE_DOS_PATHS], 1,
+                       [Define if the system uses DOS-style pathnames.])])
+])
diff --git a/config/gettext.m4 b/config/gettext.m4
new file mode 100644
index 0000000..f84e6a5
--- /dev/null
+++ b/config/gettext.m4
@@ -0,0 +1,383 @@
+# gettext.m4 serial 63 (gettext-0.18)
+dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl    default (if it is not specified or empty) is 'no-libtool'.
+dnl    INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl    and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl    If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl    $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.  If NEEDSYMBOL is specified and is
+dnl    'need-formatstring-macros', then GNU gettext implementations that don't
+dnl    support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries.  If empty,
+dnl    the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+  dnl Argument checking.
+  ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+    [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+  ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+    [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
+  ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+    [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+  define([gt_included_intl],
+    ifelse([$1], [external],
+      ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+      [yes]))
+  define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+  gt_NEEDS_INIT
+  AM_GNU_GETTEXT_NEED([$2])
+
+  AC_REQUIRE([AM_PO_SUBDIRS])dnl
+  ifelse(gt_included_intl, yes, [
+    AC_REQUIRE([AM_INTL_SUBDIR])dnl
+  ])
+
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Sometimes libintl requires libiconv, so first search for libiconv.
+  dnl Ideally we would do this search only after the
+  dnl      if test "$USE_NLS" = "yes"; then
+  dnl        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+  dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+  dnl the configure script would need to contain the same shell code
+  dnl again, outside any 'if'. There are two solutions:
+  dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+  dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+  dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+  dnl documented, we avoid it.
+  ifelse(gt_included_intl, yes, , [
+    AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+  ])
+
+  dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
+  gt_INTL_MACOSX
+
+  dnl Set USE_NLS.
+  AC_REQUIRE([AM_NLS])
+
+  ifelse(gt_included_intl, yes, [
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+  ])
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+  dnl Add a version number to the cache macros.
+  case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+  dnl If we use NLS figure out what method
+  if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+    ifelse(gt_included_intl, yes, [
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH([included-gettext],
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+    ])
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+         [AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+            [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
+            [eval "$gt_func_gnugettext_libc=yes"],
+            [eval "$gt_func_gnugettext_libc=no"])])
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+          dnl Sometimes libintl requires libiconv, so first search for libiconv.
+          ifelse(gt_included_intl, yes, , [
+            AM_ICONV_LINK
+          ])
+          dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+          dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+          dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+          dnl even if libiconv doesn't exist.
+          AC_LIB_LINKFLAGS_BODY([intl])
+          AC_CACHE_CHECK([for GNU gettext in libintl],
+            [$gt_func_gnugettext_libintl],
+           [gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+            dnl Now see whether libintl exists and does not depend on libiconv.
+            AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+              [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+              [eval "$gt_func_gnugettext_libintl=yes"],
+              [eval "$gt_func_gnugettext_libintl=no"])
+            dnl Now see whether libintl exists and depends on libiconv.
+            if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+                [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+               [LIBINTL="$LIBINTL $LIBICONV"
+                LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                eval "$gt_func_gnugettext_libintl=yes"
+               ])
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"])
+        fi
+
+        dnl If an already present or preinstalled GNU gettext() is found,
+        dnl use it.  But if this macro is used in GNU gettext, and GNU
+        dnl gettext is already preinstalled in libintl, we update this
+        dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+          dnl Reset the values set by searching for libintl.
+          LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+    ifelse(gt_included_intl, yes, [
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+          dnl GNU gettext is not found in the C library.
+          dnl Fall back on included GNU gettext library.
+          nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+        LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      CATOBJEXT=
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions to use GNU gettext tools.
+        CATOBJEXT=.gmo
+      fi
+    ])
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Some extra flags are needed during linking.
+        LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+      AC_DEFINE([ENABLE_NLS], [1],
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  AC_MSG_CHECKING([whether to use NLS])
+  AC_MSG_RESULT([$USE_NLS])
+  if test "$USE_NLS" = "yes"; then
+    AC_MSG_CHECKING([where the gettext function comes from])
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    AC_MSG_RESULT([$gt_source])
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        AC_MSG_CHECKING([how to link with libintl])
+        AC_MSG_RESULT([$LIBINTL])
+        AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+      fi
+
+      dnl For backward compatibility. Some packages may be using this.
+      AC_DEFINE([HAVE_GETTEXT], [1],
+       [Define if the GNU gettext() function is already present or preinstalled.])
+      AC_DEFINE([HAVE_DCGETTEXT], [1],
+       [Define if the GNU dcgettext() function is already present or preinstalled.])
+    fi
+
+    dnl We need to process the po/ directory.
+    POSUB=po
+  fi
+
+  ifelse(gt_included_intl, yes, [
+    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+    dnl to 'yes' because some of the testsuite requires it.
+    if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST([BUILD_INCLUDED_LIBINTL])
+    AC_SUBST([USE_INCLUDED_LIBINTL])
+    AC_SUBST([CATOBJEXT])
+
+    dnl For backward compatibility. Some configure.ins may be using this.
+    nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    DATADIRNAME=share
+    AC_SUBST([DATADIRNAME])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INSTOBJEXT=.mo
+    AC_SUBST([INSTOBJEXT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    GENCAT=gencat
+    AC_SUBST([GENCAT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INTLOBJS=
+    if test "$USE_INCLUDED_LIBINTL" = yes; then
+      INTLOBJS="\$(GETTOBJS)"
+    fi
+    AC_SUBST([INTLOBJS])
+
+    dnl Enable libtool support if the surrounding package wishes it.
+    INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+    AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
+  ])
+
+  dnl For backward compatibility. Some Makefiles may be using this.
+  INTLLIBS="$LIBINTL"
+  AC_SUBST([INTLLIBS])
+
+  dnl Make all documented variables known to autoconf.
+  AC_SUBST([LIBINTL])
+  AC_SUBST([LTLIBINTL])
+  AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+  m4_divert_text([DEFAULTS], [gt_needs=])
+  m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+  m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/config/iconv.m4 b/config/iconv.m4
new file mode 100644
index 0000000..e2041b9
--- /dev/null
+++ b/config/iconv.m4
@@ -0,0 +1,214 @@
+# iconv.m4 serial 11 (gettext-0.18.1)
+dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+  dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed libiconv and not disabled its use
+  dnl via --without-libiconv-prefix, he wants to use it. The first
+  dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+  am_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+  AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+      [iconv_t cd = iconv_open("","");
+       iconv(cd,NULL,NULL,NULL,NULL);
+       iconv_close(cd);],
+      [am_cv_func_iconv=yes])
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+        [iconv_t cd = iconv_open("","");
+         iconv(cd,NULL,NULL,NULL,NULL);
+         iconv_close(cd);],
+        [am_cv_lib_iconv=yes]
+        [am_cv_func_iconv=yes])
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+      dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10.
+      am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      AC_TRY_RUN([
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          return 1;
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\263";
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          return 1;
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          return 1;
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  if (/* Try standardized names.  */
+      iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+      /* Try IRIX, OSF/1 names.  */
+      && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+      /* Try AIX names.  */
+      && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+      /* Try HP-UX names.  */
+      && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+    return 1;
+  return 0;
+}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
+        [case "$host_os" in
+           aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+           *)            am_cv_func_iconv_works="guessing yes" ;;
+         esac])
+      LIBS="$am_save_LIBS"
+    ])
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+    AC_DEFINE([HAVE_ICONV], [1],
+      [Define if you have the iconv() function and it works.])
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    AC_MSG_CHECKING([how to link with libiconv])
+    AC_MSG_RESULT([$LIBICONV])
+  else
+    dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+    dnl either.
+    CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+  AC_SUBST([LIBICONV])
+  AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl   Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl   Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl   warnings.
+m4_define([gl_iconv_AC_DEFUN],
+  m4_version_prereq([2.64],
+    [[AC_DEFUN_ONCE(
+        [$1], [$2])]],
+    [[AC_DEFUN(
+        [$1], [$2])]]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+  AM_ICONV_LINK
+  if test "$am_cv_func_iconv" = yes; then
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL([am_cv_proto_iconv], [
+      AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"])
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([
+         $am_cv_proto_iconv])
+    AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+      [Define as const if the declaration of iconv() needs const.])
+  fi
+])
diff --git a/config/install-sh b/config/install-sh
new file mode 100755
index 0000000..377bb86
--- /dev/null
+++ b/config/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/intlmacosx.m4 b/config/intlmacosx.m4
new file mode 100644
index 0000000..dd91025
--- /dev/null
+++ b/config/intlmacosx.m4
@@ -0,0 +1,51 @@
+# intlmacosx.m4 serial 3 (gettext-0.18)
+dnl Copyright (C) 2004-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on MacOS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+  dnl Check for API introduced in MacOS X 10.2.
+  AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+    [gt_cv_func_CFPreferencesCopyAppValue],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
+       [CFPreferencesCopyAppValue(NULL, NULL)],
+       [gt_cv_func_CFPreferencesCopyAppValue=yes],
+       [gt_cv_func_CFPreferencesCopyAppValue=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+    AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+      [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+  fi
+  dnl Check for API introduced in MacOS X 10.3.
+  AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
+       [gt_cv_func_CFLocaleCopyCurrent=yes],
+       [gt_cv_func_CFLocaleCopyCurrent=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+      [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+  AC_SUBST([INTL_MACOSX_LIBS])
+])
diff --git a/config/lib-ld.m4 b/config/lib-ld.m4
new file mode 100644
index 0000000..ebb3052
--- /dev/null
+++ b/config/lib-ld.m4
@@ -0,0 +1,110 @@
+# lib-ld.m4 serial 4 (gettext-0.18)
+dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes ;;
+*)
+  acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]* | [A-Za-z]:[\\/]*)]
+      [re_direlt='/[^/][^/]*/\.\./']
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL([acl_cv_path_LD],
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break ;;
+      *)
+        test "$with_gnu_ld" != yes && break ;;
+      esac
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT([$LD])
+else
+  AC_MSG_RESULT([no])
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/config/lib-link.m4 b/config/lib-link.m4
new file mode 100644
index 0000000..c73bd8e
--- /dev/null
+++ b/config/lib-link.m4
@@ -0,0 +1,774 @@
+# lib-link.m4 serial 21 (gettext-0.18)
+dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.54])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[translit([$1],[./-], [___])])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[translit([$1],[./-], [___])])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+    dnl because these -l options might require -L options that are present in
+    dnl LIBS. -l options benefit only from the -L options listed before it.
+    dnl Otherwise, add it to the front of LIBS, because it may be a static
+    dnl library that depends on another static library that is present in LIBS.
+    dnl Static libraries benefit only from the static libraries listed after
+    dnl it.
+    case " $LIB[]NAME" in
+      *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+      *)       LIBS="$LIB[]NAME $LIBS" ;;
+    esac
+    AC_TRY_LINK([$3], [$4],
+      [ac_cv_lib[]Name=yes],
+      [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+  m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE([rpath],
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  define([acl_frompackage_]NAME, [$2])
+  popdef([NAME])
+  pushdef([PACK],[$2])
+  pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+                                  [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  define([acl_libsinpackage_]PACKUP,
+    m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1])
+  popdef([PACKUP])
+  popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+  pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+                                  [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+  dnl Autoconf >= 2.61 supports dots in --with options.
+  pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH(P_A_C_K[-prefix],
+[[  --with-]]P_A_C_K[[-prefix[=DIR]  search for ]PACKLIBS[ in DIR/include and DIR/lib
+  --without-]]P_A_C_K[[-prefix     don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  LIB[]NAME[]_PREFIX=
+  dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+  dnl computed. So it has to be reset here.
+  HAVE_LIB[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$acl_hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+  popdef([P_A_C_K])
+  popdef([PACKLIBS])
+  popdef([PACKUP])
+  popdef([PACK])
+  popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem" \
+             && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem" \
+                    && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
diff --git a/config/lib-prefix.m4 b/config/lib-prefix.m4
new file mode 100644
index 0000000..1601cea
--- /dev/null
+++ b/config/lib-prefix.m4
@@ -0,0 +1,224 @@
+# lib-prefix.m4 serial 7 (gettext-0.18)
+dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_LIB_ARG_WITH([lib-prefix],
+[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl   "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl   acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl   "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+  dnl There is no formal standard regarding lib and lib64.
+  dnl On glibc systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+  dnl the compiler's default mode by looking at the compiler's library search
+  dnl path. If at least one of its elements ends in /lib64 or points to a
+  dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+  dnl Otherwise we use the default, namely "lib".
+  dnl On Solaris systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+  dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+      dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+      dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
+      dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+      dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+      dnl symlink is missing, so we set acl_libdirstem2 too.
+      AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+        [AC_EGREP_CPP([sixtyfour bits], [
+#ifdef _LP64
+sixtyfour bits
+#endif
+           ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+        ])
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+])
diff --git a/config/mdate-sh b/config/mdate-sh
new file mode 100755
index 0000000..b3719cf
--- /dev/null
+++ b/config/mdate-sh
@@ -0,0 +1,224 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2010-08-21.06; # UTC
+
+# Copyright (C) 1995-2013 Free Software Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+fi
+
+case $1 in
+  '')
+     echo "$0: No file.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification day of FILE, in the format:
+1 January 1970
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+error ()
+{
+  echo "$0: $1" >&2
+  exit 1
+}
+
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume 'unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  ls_command='ls -L -l -d'
+else
+  ls_command='ls -l -d'
+fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+  ls_command="$ls_command -n"
+fi
+
+# A 'ls -l' line looks as follows on OS/2.
+#  drwxrwx---        0 Aug 11  2001 foo
+# This differs from Unix, which adds ownership information.
+#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month.  This cannot work with files whose owner is a
+# user named "Jan", or "Feb", etc.  However, it's unlikely that '/'
+# will be owned by a user whose name is a month.  So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`$ls_command /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+  test $# -gt 0 || error "failed parsing '$ls_command /' output"
+  shift
+  # Add another shift to the command.
+  command="$command shift;"
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+test -n "$month" || error "failed parsing '$ls_command /' output"
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\\\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+  Jan) month=January; nummonth=1;;
+  Feb) month=February; nummonth=2;;
+  Mar) month=March; nummonth=3;;
+  Apr) month=April; nummonth=4;;
+  May) month=May; nummonth=5;;
+  Jun) month=June; nummonth=6;;
+  Jul) month=July; nummonth=7;;
+  Aug) month=August; nummonth=8;;
+  Sep) month=September; nummonth=9;;
+  Oct) month=October; nummonth=10;;
+  Nov) month=November; nummonth=11;;
+  Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/missing b/config/missing
new file mode 100755
index 0000000..db98974
--- /dev/null
+++ b/config/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/nls.m4 b/config/nls.m4
new file mode 100644
index 0000000..003704c
--- /dev/null
+++ b/config/nls.m4
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+  AC_MSG_CHECKING([whether NLS is requested])
+  dnl Default is enabled NLS
+  AC_ARG_ENABLE([nls],
+    [  --disable-nls           do not use Native Language Support],
+    USE_NLS=$enableval, USE_NLS=yes)
+  AC_MSG_RESULT([$USE_NLS])
+  AC_SUBST([USE_NLS])
+])
diff --git a/config/po.m4 b/config/po.m4
new file mode 100644
index 0000000..47f36a4
--- /dev/null
+++ b/config/po.m4
@@ -0,0 +1,449 @@
+# po.m4 serial 17 (gettext-0.18)
+dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
+  AC_REQUIRE([AM_NLS])dnl
+
+  dnl Release version of the gettext macros. This is used to ensure that
+  dnl the gettext macros and po/Makefile.in.in are in sync.
+  AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
+
+  dnl Perform the following tests also if --disable-nls has been given,
+  dnl because they are needed for "make dist" to work.
+
+  dnl Search for GNU msgfmt in the PATH.
+  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+  dnl The second test excludes FreeBSD msgfmt.
+  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+    [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+  dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+  case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([GMSGFMT_015])
+
+  dnl Search for GNU xgettext 0.12 or newer in the PATH.
+  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+  dnl The second test excludes FreeBSD xgettext.
+  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+    [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  dnl Remove leftover from FreeBSD xgettext call.
+  rm -f messages.po
+
+  dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+  case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([XGETTEXT_015])
+
+  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+    [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+  dnl Installation directories.
+  dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+  dnl have to define it here, so that it can be used in po/Makefile.
+  test -n "$localedir" || localedir='${datadir}/locale'
+  AC_SUBST([localedir])
+
+  dnl Support for AM_XGETTEXT_OPTION.
+  test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+  AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+  AC_CONFIG_COMMANDS([po-directories], [[
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assigment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            # Hide the ALL_LINGUAS assigment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done]],
+   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+    # from automake < 1.5.
+    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+   ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+  # When this code is run, in config.status, two variables have already been
+  # set:
+  # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+  # - LINGUAS is the value of the environment variable LINGUAS at configure
+  #   time.
+
+changequote(,)dnl
+  # Adjust a relative srcdir.
+  ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+  ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+  ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+  # In autoconf-2.13 it is called $ac_given_srcdir.
+  # In autoconf-2.50 it is called $srcdir.
+  test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+  case "$ac_given_srcdir" in
+    .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+    /*) top_srcdir="$ac_given_srcdir" ;;
+    *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  # Find a way to echo strings without interpreting backslash.
+  if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+    gt_echo='echo'
+  else
+    if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+      gt_echo='printf %s\n'
+    else
+      echo_func () {
+        cat <<EOT
+$*
+EOT
+      }
+      gt_echo='echo_func'
+    fi
+  fi
+
+  # A sed script that extracts the value of VARIABLE from a Makefile.
+  sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^[	 ]*VARIABLE[	 ]*=/{
+  # Seen the first line of the variable definition.
+  s/^[	 ]*VARIABLE[	 ]*=//
+  ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+  # Set POTFILES to the value of the Makefile variable POTFILES.
+  sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+  POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+  # Compute POTFILES_DEPS as
+  #   $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+  POTFILES_DEPS=
+  for file in $POTFILES; do
+    POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+  done
+  POMAKEFILEDEPS=""
+
+  if test -n "$OBSOLETE_ALL_LINGUAS"; then
+    test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+  fi
+  if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+    # The LINGUAS file contains the set of available languages.
+    ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+    POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+  else
+    # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+    sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+    ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+  fi
+  # Hide the ALL_LINGUAS assigment from automake < 1.5.
+  eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+  # Compute POFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+  # Compute UPDATEPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+  # Compute DUMMYPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+  # Compute GMOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+  # Compute PROPERTIESFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+  # Compute CLASSFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+  # Compute QMFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+  # Compute MSGFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+  # Compute RESOURCESDLLFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+  case "$ac_given_srcdir" in
+    .) srcdirpre= ;;
+    *) srcdirpre='$(srcdir)/' ;;
+  esac
+  POFILES=
+  UPDATEPOFILES=
+  DUMMYPOFILES=
+  GMOFILES=
+  PROPERTIESFILES=
+  CLASSFILES=
+  QMFILES=
+  MSGFILES=
+  RESOURCESDLLFILES=
+  for lang in $ALL_LINGUAS; do
+    POFILES="$POFILES $srcdirpre$lang.po"
+    UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+    DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+    GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+    PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+    CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+    QMFILES="$QMFILES $srcdirpre$lang.qm"
+    frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+    MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+    frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+    RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+  done
+  # CATALOGS depends on both $ac_dir and the user's LINGUAS
+  # environment variable.
+  INST_LINGUAS=
+  if test -n "$ALL_LINGUAS"; then
+    for presentlang in $ALL_LINGUAS; do
+      useit=no
+      if test "%UNSET%" != "$LINGUAS"; then
+        desiredlanguages="$LINGUAS"
+      else
+        desiredlanguages="$ALL_LINGUAS"
+      fi
+      for desiredlang in $desiredlanguages; do
+        # Use the presentlang catalog if desiredlang is
+        #   a. equal to presentlang, or
+        #   b. a variant of presentlang (because in this case,
+        #      presentlang can be used as a fallback for messages
+        #      which are not translated in the desiredlang catalog).
+        case "$desiredlang" in
+          "$presentlang"*) useit=yes;;
+        esac
+      done
+      if test $useit = yes; then
+        INST_LINGUAS="$INST_LINGUAS $presentlang"
+      fi
+    done
+  fi
+  CATALOGS=
+  JAVACATALOGS=
+  QTCATALOGS=
+  TCLCATALOGS=
+  CSHARPCATALOGS=
+  if test -n "$INST_LINGUAS"; then
+    for lang in $INST_LINGUAS; do
+      CATALOGS="$CATALOGS $lang.gmo"
+      JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+      QTCATALOGS="$QTCATALOGS $lang.qm"
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+    done
+  fi
+
+  sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+  if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+	@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+	\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+	@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+	\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if test -n "$POMAKEFILEDEPS"; then
+    cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+  fi
+  mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+  XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+  AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/config/progtest.m4 b/config/progtest.m4
new file mode 100644
index 0000000..2d804ac
--- /dev/null
+++ b/config/progtest.m4
@@ -0,0 +1,92 @@
+# progtest.m4 serial 6 (gettext-0.18)
+dnl Copyright (C) 1996-2003, 2005, 2008-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+  [[\\/]]* | ?:[[\\/]]*)
+    ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in ifelse([$5], , $PATH, [$5]); do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+          if [$3]; then
+            ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+    ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$][$1])
+else
+  AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff --git a/config/texinfo.tex b/config/texinfo.tex
new file mode 100644
index 0000000..6312dad
--- /dev/null
+++ b/config/texinfo.tex
@@ -0,0 +1,10174 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+% 
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2014-05-20.16}
+%
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software: you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexraggedright=\raggedright
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
+\let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dashChar  = `\-
+\chardef\dotChar   = `\.
+\chardef\exclamChar= `\!
+\chardef\hashChar  = `\#
+\chardef\lquoteChar= `\`
+\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
+\chardef\semiChar  = `\;
+\chardef\slashChar = `\/
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2  % 0: top marks (\last...)
+      \noexpand\or \the\toks4 \the\toks6  % 1: bottom marks (default, \prev...)
+    \noexpand\else \the\toks8             % 2: color marks
+  }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.  Note that \pagecontents
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars}
+  %
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
+  \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+  %
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+  \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
+  %
+  {%
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\tt \backslashcurfont }acronym}
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingyyy.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 24pt
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1\relax \unvbox#1\relax
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\argtorun{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick.  --kasal, 16nov03
+
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as environments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At run-time, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Environment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    outside of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal.
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% @include FILE -- \input text of FILE.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+%
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\centersub\centerH
+  \else
+    \let\centersub\centerV
+  \fi
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
+}
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
+}
+
+% @sp n   outputs n lines of vertical space
+%
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+%
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+%
+\let\c=\comment
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent{%
+    \restorefirstparagraphindent
+    \indent
+  }%
+  \gdef\noindent{%
+    \restorefirstparagraphindent
+    \noindent
+  }%
+  \global\everypar = {%
+    \kern -\parindent
+    \restorefirstparagraphindent
+  }%
+}
+
+\gdef\restorefirstparagraphindent{%
+  \global \let \indent = \ptexindent
+  \global \let \noindent = \ptexnoindent
+  \global \everypar = {}%
+}
+
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
+   \iflinks
+     \tryauxfile
+     % Open the new aux file.  TeX will close it automatically at exit.
+     \immediate\openout\auxfile=\jobname.aux
+   \fi % \openindices needs to do some work in any case.
+   \openindices
+   \let\setfilename=\comment % Ignore extra @setfilename cmds.
+   %
+   % If texinfo.cnf is present on the system, read it.
+   % Useful for site-wide @afourpaper, etc.
+   \openin 1 texinfo.cnf
+   \ifeof 1 \else \input texinfo.cnf \fi
+   \closein 1
+   %
+   \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+  \newindex{cp}%
+  \newcodeindex{fn}%
+  \newcodeindex{vr}%
+  \newcodeindex{tp}%
+  \newcodeindex{ky}%
+  \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% 
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros using ideas from pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black. The dark red here is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.  We use
+  % black by default, though.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\dopdfimage#1#2#3{%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{JPG}%
+                \fi
+              \else \gdef\pdfimgext{jpeg}%
+              \fi
+            \else \gdef\pdfimgext{jpg}%
+            \fi
+          \else \gdef\pdfimgext{png}%
+          \fi
+        \else \gdef\pdfimgext{PDF}%
+        \fi
+      \else \gdef\pdfimgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
+      \ifnum\pdftexversion<13
+         #1.\pdfimgext
+       \else
+         {#1.\pdfimgext}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  %
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \turnoffactive
+    \makevalueexpandable
+    \def\pdfdestname{#1}%
+    \txiescapepdf\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }}
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}
+  %
+  % by default, use black for everything.
+  \def\urlcolor{\rgbBlack}
+  \def\linkcolor{\rgbBlack}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \edef\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      \txiescapepdf\pdfoutlinedest
+    \fi
+    %
+    % Also escape PDF chars in the display string.
+    \edef\pdfoutlinetext{#1}%
+    \txiescapepdf\pdfoutlinetext
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
+      \indexnofonts
+      \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
+    \fi
+    \nextsp}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\newdimen\textleading
+\def\setleading#1{%
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named \fontprefix#2.
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\thisisundefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               % where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
+%
+\def\definetextfontsizexi{%
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions, \definetextfontsizexi
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions, \definetextfontsizex
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+  \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+  \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+  \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+  \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+  \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
+  \def\lsize{reduced}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+  \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
+  \def\lsize{chap}\def\lllsize{subsec}%
+  \resetmathfonts \setleading{27pt}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
+\def\chapfonts{%
+  \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+  \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
+  \def\lsize{sec}\def\lllsize{text}%
+  \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+  \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+  \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
+  \def\lsize{subsec}\def\lllsize{reduced}%
+  \resetmathfonts \setleading{17pt}}
+\def\subsecfonts{%
+  \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+  \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
+  \def\lsize{text}\def\lllsize{small}%
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+  \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+  \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+  \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+  \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+  \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{9.5pt}}
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+% --karl, 24jan03.
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Font commands.
+
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
+
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ifx\next\.%
+  \else\ifx\next\comma%
+  \else\ptexslash
+  \fi\fi\fi\fi\fi
+  \aftersmartic
+}
+
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
+\def\ttslanted#1{{\ttsl #1}}
+
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+    \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+% @t, explicit typewriter.
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
+
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null % reset spacefactor to 1000
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% (But see \codedashfinish below.)
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+%
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash. -- rms.
+{
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
+  %
+  \global\def\code{\begingroup
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\normaldash
+     \let_\realunder
+    \fi
+    % Given -foo (with a single dash), we do not want to allow a break
+    % after the hyphen.
+    \global\let\codedashprev=\codedash
+    %
+    \codex
+  }
+  %
+  \gdef\codedash{\futurelet\next\codedashfinish}
+  \gdef\codedashfinish{%
+    \normaldash % always output the dash character itself.
+    % 
+    % Now, output a discretionary to allow a line break, unless
+    % (a) the next character is a -, or
+    % (b) the preceding character is a -.
+    % E.g., given --posix, we do not want to allow a break after either -.
+    % Given --foo-bar, we do want to allow a break between the - and the b.
+    \ifx\next\codedash \else
+      \ifx\codedashprev\codedash 
+      \else \discretionary{}{}{}\fi
+    \fi
+    % we need the space after the = for the case when \next itself is a
+    % space token; it would get swallowed otherwise.  As in @code{- a}.
+    \global\let\codedashprev= \next
+  }
+}
+\def\normaldash{-}
+%
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
+  \fi\fi
+}
+
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
+% @uref (abbreviation for `urlref') aka @url takes an optional
+% (comma-separated) second argument specifying the text to display and
+% an optional third arg as text to display instead of (rather than in
+% addition to) the url itself.  First (mandatory) arg is the url.
+
+% TeX-only option to allow changing PDF output to show only the second
+% arg (if given), and not the url (which is then just the link target).
+\newif\ifurefurlonlylink
+
+% The main macro is \urefbreak, which allows breaking at expected
+% places within the url.  (There used to be another version, which
+% didn't support automatic breaking.)
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+%
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}% look for second arg
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \ifurefurlonlylink
+          % PDF plus option to not display url, show just arg
+          \unhbox0             
+        \else
+          % PDF, normally display both arg and url for consistency,
+          % visibility, if the pdf is eventually used to print, etc.
+          \unhbox0\ (\urefcode{#1})%
+        \fi
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretchamount{.13em}
+\def\urefpoststretchamount{.1em}
+\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax}
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax}
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \let\email=\uref
+\fi
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find.  We need it for
+% Polish suppressed-l.  --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% ctrl is no longer a Texinfo command, but leave this definition for fun.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% 
+% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
+% FMTNAME is tex, else ELSE-TEXT.
+\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
+\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi
+}
+%
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
+}
+
+% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set.
+%
+\long\def\inlineifset#1{\doinlineifset #1,\finish}
+\long\def\doinlineifset#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax
+  \else\ignorespaces#2\fi
+}
+
+% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set.
+%
+\long\def\inlineifclear#1{\doinlineifclear #1,\finish}
+\long\def\doinlineifclear#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.
+\def\bullet{$\ptexbullet$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
+\def\ecfont{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = ectt\ecsize \space at \nominalsize
+  \else
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
+  \fi
+  \thisecfont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\thisisundefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first.  Because
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+% 
+\def\raggedtitlesettings{%
+  \rmisbold
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\secfonts\rmisbold \leftline{#1}}%
+  \fi
+}
+
+
+% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\thisisundefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil\relax
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark so that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
+  \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
+   \vadjust{\penalty 1200}}% not good to break after first line of item.
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+% 
+% @headitem starts a heading row, which we typeset in bold.  Assignments
+% have to be global since we are inside the implicit group of an
+% alignment entry.  \everycr below resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
+%
+% default for tables with no headings.
+\let\headitemcrhook=\relax
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we again encounter the problem the 1sp was intended to solve.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}% Reset from possible headitem.
+      \global\colcount=0 % Reset the column counter.
+      %
+      % Check for saved footnotes, etc.:
+      \checkinserts
+      %
+      % Perhaps a \nobreak, then reset:
+      \headitemcrhook
+      \global\let\headitemcrhook=\relax
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \obeylines
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\-=\active \catcode`\_=\active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\normaldash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+% 
+% Unfortunately, this has the consequence that when _ is in the *value*
+% of an @set, it does not print properly in the roman fonts (get the cmr
+% dot accent at position 126 instead).  No fix comes to mind, and it's
+% been this way since 2003 or earlier, so just ignore it.
+% 
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+% 
+% To get the special treatment we need for `@end ifset,' we call
+% \makecond and then redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  % Only do \closeout if we haven't already done it, else we'll end up
+  % closing the target index.
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
+    % The \closeout helps reduce unnecessary open files; the limit on the
+    % Acorn RISC OS is a mere 16 files.
+    \expandafter\closeout\csname#2indfile\endcsname
+    \expandafter\let\csname donesynindex#2\endcsname = 1
+  \fi
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+%  and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+  \def\ {\realbackslash\space }%
+  %
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should use @lbracechar and @rbracechar?
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
+  %
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
+  %
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
+  % This is not enough to reproduce the bug, but it gives the flavor.
+  %
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  %
+  % So:
+  \let\endinput = \empty
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+  \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  %
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
+  %
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  \definedummyletter\-%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\arrow
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\entrybreak
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\lbracechar
+  \definedummyword\leq
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
+  \definedummyword\result
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
+  %
+  % Handle some cases of @value -- where it does not contain any
+  % (non-fully-expandable) commands.
+  \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sansserif
+  \definedummyword\sc
+  \definedummyword\slanted
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\abbr
+  \definedummyword\acronym
+  \definedummyword\anchor
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\dmn
+  \definedummyword\email
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\image
+  \definedummyword\indicateurl
+  \definedummyword\inforef
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
+  %
+  % Consider:
+  %   @macro mkind{arg1,arg2}
+  %   @cindex \arg2\
+  %   @end macro
+  %   @mkind{foo, bar}
+  % The space after the comma will end up in the temporary definition
+  % that we make for arg2 (see \parsemargdef ff.).  We want all this to be
+  % expanded for the sake of the index, so we end up just seeing "bar".
+  \let\xeatspaces = \eatspaces
+}
+
+% For testing: output @{ and @} in index sort strings as \{ and \}.
+\newif\ifusebracesinindexes
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % All control words become @asis by default; overrides below.
+  \let\definedummyword\definedummyaccent
+  %
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  % Unfortunately, texindex is not prepared to handle braces in the
+  % content at all.  So for index sorting, we map @{ and @} to strings
+  % starting with |, since that ASCII character is between ASCII { and }.
+  \ifusebracesinindexes
+    \def\lbracechar{\lbracecmd}%
+    \def\rbracechar{\rbracecmd}%
+  \else
+    \def\lbracechar{|a}%
+    \def\rbracechar{|b}%
+  \fi
+  \let\{=\lbracechar
+  \let\}=\rbracechar
+  %
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\DH{DZZ}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\TH{ZZZ}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{zzz}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.
+  % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
+  \def\bullet{bullet}%
+  \def\comma{,}%
+  \def\copyright{copyright}%
+  \def\dots{...}%
+  \def\enddots{...}%
+  \def\equiv{==}%
+  \def\error{error}%
+  \def\euro{euro}%
+  \def\expansion{==>}%
+  \def\geq{>=}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
+  \def\leq{<=}%
+  \def\minus{-}%
+  \def\point{.}%
+  \def\pounds{pounds}%
+  \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
+  \def\registeredsymbol{R}%
+  \def\result{=>}%
+  \def\textdegree{o}%
+  %
+  \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
+  \else \indexlquoteignore \fi
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
+}
+
+% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
+% ignore left quotes in the sort term.
+{\catcode`\`=\active
+ \gdef\indexlquoteignore{\let`=\empty}}
+
+\let\indexbackslash=0  %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \safewhatsit\dosubindwrite
+  }%
+  \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+      % so it will be output as is; and it will print as backslash.
+  %
+  % Process the index entry with all font commands turned off, to
+  % get the string to sort by.
+  {\indexnofonts
+   \edef\temp{\the\toks0}% need full expansion
+   \xdef\indexsorttmp{\temp}%
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+
+% Take care of unwanted page breaks/skips around a whatsit:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
+% ..., ready, GO:
+%
+\def\safewhatsit#1{\ifhmode
+  #1%
+ \else
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \whatsitskip = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \whatsitpenalty = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\whatsitskip glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\whatsitskip
+  \fi
+  %
+  #1%
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\whatsitskip
+  \fi
+\fi}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \plainfrenchspacing
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 11
+  \openin 1 \jobname.#1s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+  \else
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \temp
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\backslashcurfont}%
+      \catcode`\\ = 0
+      \escapechar = `\\
+      \begindoublecolumns
+      \input \jobname.#1s
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+\def\initial#1{{%
+  % Some minor font changes for the special characters.
+  \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+  %
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus .5\baselineskip
+  \leftline{\secbf #1}%
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+}}
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+%	\def\entry#1#2{...
+% But this freezes the catcodes in the argument, and can cause problems to
+% @code, which sets - active.  This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+% The right solution is to prevent \entry from swallowing the whole text.
+%                                 --kasal, 21nov03
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % Do not fill out the last line with white space.
+    \parfillskip = 0in
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % Do not prefer a separate line ending with a hyphen to fewer lines.
+    \finalhyphendemerits = 0
+    %
+    % \hangindent is only relevant when the entry text and page number
+    % don't both fit on one line.  In that case, bob suggests starting the
+    % dots pretty far over on the line.  Unfortunately, a large
+    % indentation looks wrong when the entry text itself is broken across
+    % lines.  So we use a small indentation and put up with long leaders.
+    %
+    % \hangafter is reset to 1 (which is the value we want) at the start
+    % of each paragraph, so we need not do anything with that.
+    \hangindent = 2em
+    %
+    % When the entry text needs to be broken, just fill out the first line
+    % with blank space.
+    \rightskip = 0pt plus1fil
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus1pt
+    %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}%
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\entrybreak{\unskip\space\ignorespaces}%
+\def\doentry{%
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+    % #1 is the page number.
+    %
+    % The following is kludged to not output a line of dots in the index if
+    % there are no page numbers.  The next person who breaks this will be
+    % cursed by a Unix daemon.
+    \setbox\boxA = \hbox{#1}%
+    \ifdim\wd\boxA = 0pt
+      \ %
+    \else
+      %
+      % If we must, put the page number on a line of its own, and fill out
+      % this line with blank space.  (The \hfil is overwhelmed with the
+      % fill leaders glue in \indexdotfill if the page number does fit.)
+      \hfil\penalty50
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      % The `\ ' here is removed by the implicit \unskip that TeX does as
+      % part of (the primitive) \par.  Without it, a spurious underfull
+      % \hbox ensues.
+      \ifpdf
+	\pdfgettoks#1.%
+	\ \the\toksA
+      \else
+	\ #1%
+      \fi
+    \fi
+    \par
+  \endgroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    #2
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+  }%
+  \eject % run that output routine to set \partialpage
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \vsize = 2\vsize
+}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
+  \output = {%
+    % Split the last of the double-column material.  Leave it on the
+    % current page, no automatic page break.
+    \balancecolumns
+    %
+    % If we end up splitting too much material for the current page,
+    % though, there will be another page break right after this \output
+    % invocation ends.  Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.  (We hope \balancecolumns will never be
+    % called on to balance too much material, but if it is, this makes
+    % the output somewhat more palatable.)
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \divide\dimen@ by 2 % target to split to
+  %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+  \splittopskip = \topskip
+  % Loop until we get a decent breakpoint.
+  {%
+    \vbadness = 10000
+    \loop
+      \global\setbox3 = \copy0
+      \global\setbox1 = \vsplit3 to \dimen@
+    \ifdim\ht3>\dimen@
+      \global\advance\dimen@ by 1pt
+    \repeat
+  }%
+  %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+  \setbox0=\vbox to\dimen@{\unvbox1}%
+  \setbox2=\vbox to\dimen@{\unvbox3}%
+  %
+  \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
+\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
+\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unnlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unnlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  % Well, we could do the following in a group, but that would break
+  % an assumption that \chapmacro is called at the outermost level.
+  % Thus we are safer this way:		--kasal, 24feb04
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+% 
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+% Parameter controlling skip before chapter headings (if needed)
+\newskip\chapheadingskip
+
+% Define plain chapter starts, and page on/off switching for it.
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+\def\chappager{\par\vfill\supereject}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
+  \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
+  {%
+    \chapfonts \rmisbold
+    %
+    % Have to define \lastsection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\lastsection{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
+}
+\def\CHAPFopen{%
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\seckeyword{sec}
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    \checkenv{}% should not be in an environment.
+    %
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rmisbold
+    %
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \global\let\prevsectiondefs=\lastsectiondefs
+    \domark
+    %
+    % Only insert the space after the number if we have a section number.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\lastsection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \lastsection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\lastsection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\lastsection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chapmacro.
+    \donoderef{#3}%
+    %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
+  \vskip-\parskip
+  %
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
+
+% Normal (long) toc.
+%
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\partentry = \shortpartentry
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @tex ... @end tex    escapes into raw TeX temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain @ character.
+
+\envdef\tex{%
+  \setupmarkupstyle{tex}%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \catcode `\`=\other
+  \catcode `\'=\other
+  \escapechar=`\\
+  %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\*=\ptexstar
+  \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % we've made it outer
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
+  \vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\newdimen\nonfillparindent
+\def\nonfillstart{%
+  \aboveenvbreak
+  \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
+  \parindent = 0pt
+  \let\indent\nonfillindent
+  %
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
+}
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvdef{lisp}{example}{%
+  \nonfillstart
+  \tt\setupmarkupstyle{example}%
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenvdef{display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenvdef{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill\relax
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.  Don't stretch around special
+% characters in urls in this environment, since the stretch at the right
+% should be enough.
+\envdef\raggedright{%
+  \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax
+  \def\urefprestretchamount{0pt}%
+  \def\urefpoststretchamount{0pt}%
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
+  \ifx\nonarrowing\relax
+    \advance\rightskip by \lispnarrowing
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\thisisundefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallquotation{\Equotation}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+% 
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \setupmarkupstyle{verb}%
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion.
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
+    }%
+  }
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
+  \tabexpand
+  \setupmarkupstyle{verbatim}%
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count.
+  % Must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil\relax
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remaining is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+% Types:
+
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  \par
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  %
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
+\def\badparencount{%
+  \message{Warning: unbalanced parentheses in @def...}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \message{Warning: unbalanced square brackets in @def...}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\thisisundefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\def\scanmacro#1{\begingroup
+  \newlinechar`\^^M
+  \let\xeatspaces\eatspaces
+  %
+  % Undo catcode changes of \startcontents and \doprintindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.  Previously, we had
+  % \catcode`\\=\other instead.  We'll see whether a problem appears
+  % with macro expansion.				--kasal, 19aug04
+  \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  %
+  % ... and for \example:
+  \spaceisspace
+  %
+  % The \empty here causes a following catcode 5 newline to be eaten as
+  % part of reading whitespace after a control sequence.  It does not
+  % eat a catcode 13 newline.  There's no good way to handle the two
+  % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+  % would then have different behavior).  See the Macro Details node in
+  % the manual for the workaround we recommend for macros and
+  % line-oriented commands.
+  % 
+  \scantokens{#1\empty}%
+\endgroup}
+
+\def\scanexp#1{%
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+%
+\def\scanctxt{% used as subroutine
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\@=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
+}
+
+\def\scanargctxt{% used for copying and captions, not macros.
+  \scanctxt
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{% used for @macro definitions
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+\def\macroargctxt{% used when scanning invocations
+  \scanctxt
+  \catcode`\\=0
+}
+% why catcode 0 for \ in the above?  To recognize \\ \{ \} as "escapes"
+% for the single characters \ { }.  Thus, we end up with the "commands"
+% that would be written @\ @{ @} in a Texinfo document.
+% 
+% We already have @{ and @}.  For @\, we define it here, and only for
+% this purpose, to produce a typewriter backslash (so, the @\ that we
+% define for @math can't be used with @macro calls):
+%
+\def\\{\normalbackslash}%
+% 
+% We would like to do this for \, too, since that is what makeinfo does.
+% But it is not possible, because Texinfo already has a command @, for a
+% cedilla accent.  Documents must use @comma{} instead.
+%
+% \anythingelse will almost certainly be an error of some kind.
+
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+%
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\margbackslash#1{\char`\#1 }
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}% now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0\relax
+  \else
+     \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\definedummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\definedummyword \noexpand#1%
+  \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname#1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument is to be expanded.  If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef  the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  % In case that there are 10 or more arguments we parse again the arguments
+  % list to set new definitions for the \macarg.BLAH macros corresponding to
+  % each BLAH argument. It was anyhow needed to parse already once this list
+  % in order to count the arguments, and as macros with at most 9 arguments
+  % are by far more frequent than macro with 10 or more arguments, defining
+  % twice the \macarg.BLAH macros does not cost too much processing power.
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\xeatspaces{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+%
+
+\catcode `\@\texiatcatcode
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+
+% 
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+\def\macargexpandinbody@{% 
+  %% Define the named-macro outside of this group and then close this group. 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+%
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifrecursive
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\temp}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+         \egroup\noexpand\scanmacro{\temp}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname xxx\endcsname
+            \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
+    \fi
+  \else
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+        \egroup
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \expandafter\noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+        \paramlist{%
+            \egroup
+            \noexpand\norecurse{\the\macname}%
+            \noexpand\scanmacro{\temp}\egroup}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
+    \fi
+  \fi}
+
+\catcode `\@\texiatcatcode\relax
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {.  If so it reads up to the closing }, if not, it reads the whole
+% line.  Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg).
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup\else
+    \expandafter\parsearg
+  \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Make them active and then expand them all to nothing.
+%
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \lastsection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \atdummies  % preserve commands, but don't expand them
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\lastsection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
+    }%
+  \fi
+}
+
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  %
+  % Get args without leading/trailing spaces.
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We (should) know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    {\indexnofonts
+     \turnoffactive
+     \makevalueexpandable
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
+     \getfilename{#4}%
+     %
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \edef\pdfxrefdest{#1}%
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
+     \else
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
+     \fi
+    }%
+    \setcolor{\linkcolor}%
+  \fi
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd\printedrefnamebox = 0pt
+      \refx{#1-snt}{}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % If the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd\printedmanualbox > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
+    %
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
+    \else
+      % Reference within this manual.
+      %
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via the macro below so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+    \fi\fi
+  \fi
+  \endlink
+\endgroup}
+
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+  {%
+    \indexnofonts
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions).  But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
+  \fi
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % Make the characters 128-255 be printing characters.
+  {%
+    \count1=128
+    \def\loop{%
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
+    }%
+  }%
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for Info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  %
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  %
+  % Nested footnotes are not supported in TeX, that would take a lot
+  % more work.  (\startsavinginserts does not suffice.)
+  \let\footnote=\errfootnote
+  %
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\pagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+\def\errfootnote{%
+  \errhelp=\EMsimple
+  \errmessage{Nested footnotes not supported in texinfo.tex,
+    even though they work in makeinfo; sorry}
+}
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarly, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+%
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\thisisundefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
+    \nobreak\medskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+  \fi
+  %
+  % Leave vertical mode so that indentation from an enclosing
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
+  %
+  % Output the image.
+  \ifpdf
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    % \epsfbox itself resets \epsf?size at each figure.
+    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+    \epsfbox{#1.eps}%
+  \fi
+  %
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \lastsection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+	\appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \atdummies
+        %
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \lastsection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
+%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{%
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file by the name they passed if it exists.
+    \let_ = \normalunderscore  % normal _ character for filename test
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \documentlanguagetrywithoutunderscore #1_\finish
+    \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup % end raw TeX
+}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     \utfeightchardefs
+  %
+  \else
+    \message{Unknown document encoding #1, ignoring.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{\missingcharmsg{CENT SIGN}}
+  \gdef^^a3{{\pounds}}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\missingcharmsg{YEN SIGN}}
+  \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{$\lnot$}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  %
+  \gdef^^b7{$^.$}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  %
+  \gdef^^bb{\guillemetright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\point}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
+
+% Following George Bush, get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \pageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \pagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {-.2in}{0in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1\relax
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
+\chardef\hat=`\^
+\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+
+\chardef \less=`\<
+\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless
+\chardef \gtr=`\>
+\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
+\catcode`\+=\active \def+{{\tt \char 43}}
+\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% used for headline/footline in the output routine, in case the page
+% breaks in the middle of an @tex block.
+\def\texinfochars{%
+  \let< = \activeless
+  \let> = \activegtr
+  \let~ = \activetilde 
+  \let^ = \activehat
+  \markupsetuplqdefault \markupsetuprqdefault 
+  \let\b = \strong
+  \let\i = \smartitalic
+  % in principle, all other definitions in \tex have to be undone too.
+}
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active  % @ for escape char from now on.
+
+% The story here is that in math mode, the \char of \backslashcurfont
+% ends up printing the roman \ from the math symbol font (because \char
+% in math mode uses the \mathcode, and plain.tex sets
+% \mathcode`\\="026E).  It seems better for @backslashchar{} to always
+% print a typewriter backslash, hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
+
+% On startup, @fixbackslash assigns:
+%  @let \ = @normalbackslash
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.  We switch back and forth between these.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.  Also revert - to its normal character, in
+% case the active - from code has slipped in.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let\=@normalbackslash
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
+}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\' in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active
+  @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
+% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
diff --git a/configh.dos b/configh.dos
new file mode 100644
index 0000000..b316214
--- /dev/null
+++ b/configh.dos
@@ -0,0 +1,113 @@
+/* configh.dos -- hand-massaged config.h file for MS-DOS builds         -*-C-*-
+
+Copyright (C) 1994-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Include this header to make __DJGPP_MINOR__ available because DJGPP ports
+   of GCC 4.3.0 and later no longer do it automatically.  */
+#include <sys/version.h>
+
+/* Many things are defined already by a system header.  */
+#include <sys/config.h>
+
+#if __DJGPP__ > 2 || __DJGPP_MINOR__ > 1
+
+/* Define to 1 if 'sys_siglist' is declared by <signal.h> or <unistd.h>. */
+# define SYS_SIGLIST_DECLARED 1
+
+/* Define to 1 if the C library defines the variable '_sys_siglist'.  */
+# define HAVE_DECL_SYS_SIGLIST 1
+
+#else
+
+/* Define NSIG.  */
+# define NSIG SIGMAX
+
+#endif
+
+/* Use high resolution file timestamps if nonzero. */
+#define FILE_TIMESTAMP_HI_RES 0
+
+/* Define to 1 if you have 'alloca', as a function or macro. */
+#define HAVE_ALLOCA 1
+
+/* Define to 1 if you have the fdopen function.  */
+#define HAVE_FDOPEN 1
+
+/* Define to 1 if you have the 'getgroups' function. */
+#define HAVE_GETGROUPS 1
+
+/* Define to 1 if you have the <memory.h> header file.  */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the mkstemp function.  */
+#define HAVE_MKSTEMP 1
+
+/* Define to 1 if you have the 'mktemp' function. */
+#define HAVE_MKTEMP 1
+
+/* Define to 1 if you have the 'setlinebuf' function. */
+#define HAVE_SETLINEBUF 1
+
+/* Define to 1 if you have the 'setvbuf' function. */
+#define HAVE_SETVBUF 1
+
+#define SCCS_GET "get"
+
+/* Define to 'unsigned long' or 'unsigned long long'
+   if <inttypes.h> doesn't define.  */
+#define uintmax_t unsigned long long
+
+/* Define the type of the first arg to select().  */
+#define fd_set_size_t int
+
+/* Define to 1 if you have the select function.  */
+#define HAVE_SELECT 1
+
+/* Define to 1 if you have the stricmp function.  */
+#define HAVE_STRICMP 1
+
+/* Define to 1 if you have the 'strncasecmp' function. */
+#define HAVE_STRNCASECMP 1
+
+/* Name of the package */
+#define PACKAGE "make"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "bug-make@gnu.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "GNU make"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "GNU make 4.1"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "make"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "4.1"
+
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
+
+/* Version number of package */
+#define VERSION "4.1"
+
+/* Build host information. */
+#define MAKE_HOST "i386-pc-msdosdjgpp"
+
+/* Grok DOS paths (drive specs and backslash path element separators) */
+#define HAVE_DOS_PATHS
diff --git a/configure b/configure
new file mode 100755
index 0000000..c587e44
--- /dev/null
+++ b/configure
@@ -0,0 +1,12904 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for GNU make 4.1.
+#
+# Report bugs to <bug-make@gnu.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and bug-make@gnu.org
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='GNU make'
+PACKAGE_TARNAME='make'
+PACKAGE_VERSION='4.1'
+PACKAGE_STRING='GNU make 4.1'
+PACKAGE_BUGREPORT='bug-make@gnu.org'
+PACKAGE_URL='http://www.gnu.org/software/make/'
+
+ac_unique_file="vpath.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+WINDOWSENV_FALSE
+WINDOWSENV_TRUE
+MAKE_HOST
+USE_LOCAL_GLOB_FALSE
+USE_LOCAL_GLOB_TRUE
+GLOBLIB
+GLOBINC
+AM_LDFLAGS
+USE_CUSTOMS_FALSE
+USE_CUSTOMS_TRUE
+REMOTE
+GETLOADAVG_LIBS
+KMEM_GROUP
+NEED_SETGID
+LIBOBJS
+HAVE_GUILE_FALSE
+HAVE_GUILE_TRUE
+GUILE_LIBS
+GUILE_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+ALLOCA
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+ac_ct_AR
+PERL
+AR
+RANLIB
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files='MAINT_MAKEFILE'
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_dependency_tracking
+enable_nls
+with_gnu_ld
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+enable_largefile
+with_guile
+with_customs
+enable_case_insensitive_file_system
+enable_job_server
+enable_load
+with_dmalloc
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+GUILE_CFLAGS
+GUILE_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures GNU make 4.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/make]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of GNU make 4.1:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --disable-nls           do not use Native Language Support
+  --disable-rpath         do not hardcode runtime library paths
+  --disable-largefile     omit support for large files
+  --enable-case-insensitive-file-system
+                          assume file systems are case insensitive
+  --disable-job-server    disallow recursive make communication during -jN
+  --disable-load          disable support for the 'load' operation
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld default=no
+  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
+  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
+  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
+  --without-libintl-prefix     don't search for libintl in includedir and libdir
+  --with-guile            Support GNU Guile for embedded scripting
+  --with-customs=DIR      enable remote jobs via Customs--see README.customs
+  --with-dmalloc          use dmalloc, as in http://www.dmalloc.com
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  GUILE_CFLAGS
+              C compiler flags for GUILE, overriding pkg-config
+  GUILE_LIBS  linker flags for GUILE, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-make@gnu.org>.
+GNU make home page: <http://www.gnu.org/software/make/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+GNU make configure 4.1
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------- ##
+## Report this to bug-make@gnu.org ##
+## ------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by GNU make $as_me 4.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+# Autoconf setup
+ac_aux_dir=
+for ac_dir in config "$srcdir"/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# Automake setup
+# We have to enable "foreign" because ChangeLog is auto-generated
+# We cannot enable -Werror because gettext 0.18.1 has invalid content
+# When we update gettext to 0.18.3 or better we can add it again.
+am__api_version='1.14'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='make'
+ VERSION='4.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+# Checks for programs.
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Perl is needed for the test suite (only)
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PERL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$PERL"; then
+  ac_cv_prog_PERL="$PERL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_PERL="perl"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_prog_PERL" && ac_cv_prog_PERL="perl"
+fi
+fi
+PERL=$ac_cv_prog_PERL
+if test -n "$PERL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
+$as_echo "$PERL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# Needed for w32/Makefile.am
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar lib "link -lib"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar lib "link -lib"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+   am_cv_ar_interface=ar
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+        { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+  ;;
+esac
+
+
+# Specialized system macros
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
+$as_echo_n "checking for library containing strerror... " >&6; }
+if ${ac_cv_search_strerror+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char strerror ();
+int
+main ()
+{
+return strerror ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' cposix; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_strerror=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_strerror+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_strerror+:} false; then :
+
+else
+  ac_cv_search_strerror=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
+$as_echo "$ac_cv_search_strerror" >&6; }
+ac_res=$ac_cv_search_strerror
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+
+# Enable gettext, in "external" mode.
+
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+    # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+  enableval=$enable_nls; USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+      GETTEXT_MACRO_VERSION=0.18
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGFMT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+    ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $GMSGFMT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+    case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$XGETTEXT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+    ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+    rm -f messages.po
+
+    case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGMERGE" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+            ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+    ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+        test -n "$localedir" || localedir='${datadir}/locale'
+
+
+    test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+  ac_config_commands="$ac_config_commands po-directories"
+
+
+
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${acl_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break ;;
+      *)
+        test "$with_gnu_ld" != yes && break ;;
+      esac
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes ;;
+*)
+  acl_cv_prog_gnu_ld=no ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
+
+
+
+
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+                                    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef _LP64
+sixtyfour bits
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
+  gl_cv_solaris_64bit=yes
+else
+  gl_cv_solaris_64bit=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; }
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBICONV=
+  LTLIBICONV=
+  INCICONV=
+  LIBICONV_PREFIX=
+      HAVE_LIBICONV=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='iconv '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+              else
+                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+    case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+    if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libc=yes"
+else
+  eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+          am_save_CPPFLAGS="$CPPFLAGS"
+
+  for element in $INCICONV; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+       iconv(cd,NULL,NULL,NULL,NULL);
+       iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+         iconv(cd,NULL,NULL,NULL,NULL);
+         iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$am_save_LIBS"
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+            am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      if test "$cross_compiling" = yes; then :
+  case "$host_os" in
+           aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+           *)            am_cv_func_iconv_works="guessing yes" ;;
+         esac
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          return 1;
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\263";
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          return 1;
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          return 1;
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  if (/* Try standardized names.  */
+      iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+      /* Try IRIX, OSF/1 names.  */
+      && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+      /* Try AIX names.  */
+      && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+      /* Try HP-UX names.  */
+      && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+    return 1;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  am_cv_func_iconv_works=yes
+else
+  am_cv_func_iconv_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+      LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+  else
+            CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+  withval=$with_libintl_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBINTL=
+  LTLIBINTL=
+  INCINTL=
+  LIBINTL_PREFIX=
+      HAVE_LIBINTL=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='intl '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+              else
+                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+                        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libintl=yes"
+else
+  eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+                        if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  LIBINTL="$LIBINTL $LIBICONV"
+                LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+        fi
+
+                                        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+                    LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+  if test "$USE_NLS" = "yes"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+  for element in $INCINTL; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+      fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+    fi
+
+        POSUB=po
+  fi
+
+
+
+    INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+# This test must come as early as possible after the compiler configuration
+# tests, because the choice of the file model can (in principle) affect
+# whether functions and headers are available, whether they work, etc.
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+  enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_sys_largefile_CC=no
+     if test "$GCC" != yes; then
+       ac_save_CC=$CC
+       while :; do
+	 # IRIX 6.2 and later do not support large files by default,
+	 # so use the C compiler's -n32 option if that helps.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 CC="$CC -n32"
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 break
+       done
+       CC=$ac_save_CC
+       rm -f conftest.$ac_ext
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+  if test "$ac_cv_sys_largefile_CC" != no; then
+    CC=$CC$ac_cv_sys_largefile_CC
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_file_offset_bits=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  if test $ac_cv_sys_file_offset_bits = unknown; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_large_files=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  fi
+
+
+fi
+
+
+# Checks for libraries.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getpwnam" >&5
+$as_echo_n "checking for library containing getpwnam... " >&6; }
+if ${ac_cv_search_getpwnam+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getpwnam ();
+int
+main ()
+{
+return getpwnam ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' sun; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_getpwnam=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_getpwnam+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_getpwnam+:} false; then :
+
+else
+  ac_cv_search_getpwnam=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getpwnam" >&5
+$as_echo "$ac_cv_search_getpwnam" >&6; }
+ac_res=$ac_cv_search_getpwnam
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+  as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if eval \${$as_ac_Header+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <$ac_hdr>
+
+int
+main ()
+{
+if ((DIR *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_ac_Header=yes"
+else
+  eval "$as_ac_Header=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+
+ac_header_dirent=$ac_hdr; break
+fi
+
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dir; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' x; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5
+$as_echo_n "checking whether stat file-mode macros are broken... " >&6; }
+if ${ac_cv_header_stat_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined S_ISBLK && defined S_IFDIR
+extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1];
+#endif
+
+#if defined S_ISBLK && defined S_IFCHR
+extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1];
+#endif
+
+#if defined S_ISLNK && defined S_IFREG
+extern char c3[S_ISLNK (S_IFREG) ? -1 : 1];
+#endif
+
+#if defined S_ISSOCK && defined S_IFREG
+extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1];
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stat_broken=no
+else
+  ac_cv_header_stat_broken=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5
+$as_echo "$ac_cv_header_stat_broken" >&6; }
+if test $ac_cv_header_stat_broken = yes; then
+
+$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_time=yes
+else
+  ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+for ac_header in stdlib.h locale.h unistd.h limits.h fcntl.h string.h \
+                  memory.h sys/param.h sys/resource.h sys/time.h sys/timeb.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
+else
+  ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if ${ac_cv_type_uid_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "uid_t" >/dev/null 2>&1; then :
+  ac_cv_type_uid_t=yes
+else
+  ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
+if test $ac_cv_type_uid_t = no; then
+
+$as_echo "#define uid_t int" >>confdefs.h
+
+
+$as_echo "#define gid_t int" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+
+# Find some definition for uintmax_t
+
+ac_fn_c_check_type "$LINENO" "uintmax_t" "ac_cv_type_uintmax_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintmax_t" = xyes; then :
+
+else
+   uintmax_t="unsigned long"
+  ac_fn_c_check_type "$LINENO" "unsigned long long" "ac_cv_type_unsigned_long_long" "$ac_includes_default"
+if test "x$ac_cv_type_unsigned_long_long" = xyes; then :
+  uintmax_t="unsigned long long"
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define uintmax_t $uintmax_t
+_ACEOF
+
+
+fi
+
+
+# Find out whether our struct stat returns nanosecond resolution timestamps.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nanoseconds field of struct stat" >&5
+$as_echo_n "checking for nanoseconds field of struct stat... " >&6; }
+if ${ac_cv_struct_st_mtim_nsec+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_CPPFLAGS="$CPPFLAGS"
+    ac_cv_struct_st_mtim_nsec=no
+    # st_mtim.tv_nsec -- the usual case
+    # st_mtim._tv_nsec -- Solaris 2.6, if
+    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
+    #	 && !defined __EXTENSIONS__)
+    # st_mtim.st__tim.tv_nsec -- UnixWare 2.1.2
+    # st_mtime_n -- AIX 5.2 and above
+    # st_mtimespec.tv_nsec -- Darwin (Mac OSX)
+    for ac_val in st_mtim.tv_nsec st_mtim._tv_nsec st_mtim.st__tim.tv_nsec st_mtime_n st_mtimespec.tv_nsec; do
+      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+int
+main ()
+{
+struct stat s; s.ST_MTIM_NSEC;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_struct_st_mtim_nsec=$ac_val; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    done
+    CPPFLAGS="$ac_save_CPPFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_st_mtim_nsec" >&5
+$as_echo "$ac_cv_struct_st_mtim_nsec" >&6; }
+
+  if test $ac_cv_struct_st_mtim_nsec != no; then
+
+cat >>confdefs.h <<_ACEOF
+#define ST_MTIM_NSEC $ac_cv_struct_st_mtim_nsec
+_ACEOF
+
+  fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use high resolution file timestamps" >&5
+$as_echo_n "checking whether to use high resolution file timestamps... " >&6; }
+if ${make_cv_file_timestamp_hi_res+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   make_cv_file_timestamp_hi_res=no
+  if test "$ac_cv_struct_st_mtim_nsec" != no; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+int
+main ()
+{
+char a[0x7fffffff < (uintmax_t)-1 >> 30 ? 1 : -1];
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_file_timestamp_hi_res=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_file_timestamp_hi_res" >&5
+$as_echo "$make_cv_file_timestamp_hi_res" >&6; }
+if test "$make_cv_file_timestamp_hi_res" = yes; then :
+  val=1
+else
+  val=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define FILE_TIMESTAMP_HI_RES $val
+_ACEOF
+
+
+if test "$make_cv_file_timestamp_hi_res" = yes; then :
+   # Solaris 2.5.1 needs -lposix4 to get the clock_gettime function.
+  # Solaris 7 prefers the library name -lrt to the obsolescent name -lposix4.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
+$as_echo_n "checking for library containing clock_gettime... " >&6; }
+if ${ac_cv_search_clock_gettime+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
+int
+main ()
+{
+return clock_gettime ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' rt posix4; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_clock_gettime=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_clock_gettime+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_clock_gettime+:} false; then :
+
+else
+  ac_cv_search_clock_gettime=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
+$as_echo "$ac_cv_search_clock_gettime" >&6; }
+ac_res=$ac_cv_search_clock_gettime
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+  if test "$ac_cv_search_clock_gettime" != no; then :
+
+$as_echo "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h
+
+
+fi
+
+fi
+
+# Check for DOS-style pathnames.
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether system uses MSDOS-style paths" >&5
+$as_echo_n "checking whether system uses MSDOS-style paths... " >&6; }
+if ${ac_cv_dos_paths+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__ && !defined __EMX__ && !defined __MSYS__ && !defined __CYGWIN__
+neither MSDOS nor Windows nor OS2
+#endif
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_dos_paths=yes
+else
+  ac_cv_dos_paths=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_dos_paths" >&5
+$as_echo "$ac_cv_dos_paths" >&6; }
+
+  if test x"$ac_cv_dos_paths" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DOS_PATHS 1
+_ACEOF
+
+fi
+
+
+# See if we have a standard version of gettimeofday().  Since actual
+# implementations can differ, just make sure we have the most common
+# one.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard gettimeofday" >&5
+$as_echo_n "checking for standard gettimeofday... " >&6; }
+if ${ac_cv_func_gettimeofday+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_func_gettimeofday=no
+   if test "$cross_compiling" = yes; then :
+  ac_cv_func_gettimeofday="no (cross-compiling)"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/time.h>
+                  int main ()
+                  {
+                    struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
+                    exit (gettimeofday (&t, 0) != 0
+                          || t.tv_sec < 0 || t.tv_usec < 0);
+                  }
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_gettimeofday=yes
+else
+  ac_cv_func_gettimeofday=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_gettimeofday" >&5
+$as_echo "$ac_cv_func_gettimeofday" >&6; }
+if test "$ac_cv_func_gettimeofday" = yes; then :
+
+$as_echo "#define HAVE_GETTIMEOFDAY 1" >>confdefs.h
+
+
+fi
+
+for ac_func in strdup strndup mkstemp mktemp fdopen fileno \
+                dup dup2 getcwd realpath sigsetmask sigaction \
+                getgroups seteuid setegid setlinebuf setreuid setregid \
+                getrlimit setrlimit setvbuf pipe strerror strsignal \
+                lstat readlink atexit isatty ttyname
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# We need to check declarations, not just existence, because on Tru64 this
+# function is not declared without special flags, which themselves cause
+# other problems.  We'll just use our own.
+ac_fn_c_check_decl "$LINENO" "bsd_signal" "ac_cv_have_decl_bsd_signal" "#define _GNU_SOURCE 1
+#include <signal.h>
+"
+if test "x$ac_cv_have_decl_bsd_signal" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_BSD_SIGNAL $ac_have_decl
+_ACEOF
+
+
+if ${ac_cv_func_setvbuf_reversed+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_func_setvbuf_reversed=no
+fi
+
+
+
+# Rumor has it that strcasecmp lives in -lresolv on some odd systems.
+# It doesn't hurt much to use our own if we can't find it so I don't
+# make the effort here.
+for ac_func in strcasecmp strncasecmp strcmpi strncmpi stricmp strnicmp
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# strcoll() is used by the GNU glob library
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5
+$as_echo_n "checking for working strcoll... " >&6; }
+if ${ac_cv_func_strcoll_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_strcoll_works=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+return (strcoll ("abc", "def") >= 0 ||
+	 strcoll ("ABC", "DEF") >= 0 ||
+	 strcoll ("123", "456") >= 0)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_strcoll_works=yes
+else
+  ac_cv_func_strcoll_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5
+$as_echo "$ac_cv_func_strcoll_works" >&6; }
+if test $ac_cv_func_strcoll_works = yes; then
+
+$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if ${ac_cv_working_alloca_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
+else
+  ac_cv_working_alloca_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
+
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if ${ac_cv_func_alloca_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+void *alloca (size_t);
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+				    if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
+else
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if ${ac_cv_os_cray+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
+fi
+
+  done
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if ${ac_cv_c_stack_direction+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+int
+main (int argc, char **argv)
+{
+  return find_stack_direction (0, argc + !argv + 20) < 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
+else
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5
+$as_echo_n "checking whether closedir returns void... " >&6; }
+if ${ac_cv_func_closedir_void+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_closedir_void=yes
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header_dirent>
+#ifndef __cplusplus
+int closedir ();
+#endif
+
+int
+main ()
+{
+return closedir (opendir (".")) != 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_closedir_void=no
+else
+  ac_cv_func_closedir_void=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5
+$as_echo "$ac_cv_func_closedir_void" >&6; }
+if test $ac_cv_func_closedir_void = yes; then
+
+$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h
+
+fi
+
+
+# See if the user wants to add (or not) GNU Guile support
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	else
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+
+# Check whether --with-guile was given.
+if test "${with_guile+set}" = set; then :
+  withval=$with_guile;
+fi
+
+
+# For some strange reason, at least on Ubuntu, each version of Guile
+# comes with it's own PC file so we have to specify them as individual
+# packages.  Ugh.
+if test "x$with_guile" != xno; then :
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-2.0") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-2.0") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-2.0" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-2.0" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-1.8" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-1.8" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+	have_guile=no
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	have_guile=no
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-1.8" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-1.8" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+	have_guile=no
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	have_guile=no
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+
+fi
+
+if test "$have_guile" = yes; then :
+
+$as_echo "#define HAVE_GUILE 1" >>confdefs.h
+
+fi
+
+ if test "$have_guile" = yes; then
+  HAVE_GUILE_TRUE=
+  HAVE_GUILE_FALSE='#'
+else
+  HAVE_GUILE_TRUE='#'
+  HAVE_GUILE_FALSE=
+fi
+
+
+ac_have_func=no # yes means we've found a way to get the load average.
+
+# Make sure getloadavg.c is where it belongs, at configure-time.
+test -f "$srcdir/$ac_config_libobj_dir/getloadavg.c" ||
+  as_fn_error $? "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing" "$LINENO" 5
+
+ac_save_LIBS=$LIBS
+
+# Check for getloadavg, but be sure not to touch the cache variable.
+(ac_fn_c_check_func "$LINENO" "getloadavg" "ac_cv_func_getloadavg"
+if test "x$ac_cv_func_getloadavg" = xyes; then :
+  exit 0
+else
+  exit 1
+fi
+) && ac_have_func=yes
+
+# On HPUX9, an unprivileged user can get load averages through this function.
+for ac_func in pstat_getdynamic
+do :
+  ac_fn_c_check_func "$LINENO" "pstat_getdynamic" "ac_cv_func_pstat_getdynamic"
+if test "x$ac_cv_func_pstat_getdynamic" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_PSTAT_GETDYNAMIC 1
+_ACEOF
+
+fi
+done
+
+
+# Solaris has libkstat which does not require root.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for kstat_open in -lkstat" >&5
+$as_echo_n "checking for kstat_open in -lkstat... " >&6; }
+if ${ac_cv_lib_kstat_kstat_open+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lkstat  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kstat_open ();
+int
+main ()
+{
+return kstat_open ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_kstat_kstat_open=yes
+else
+  ac_cv_lib_kstat_kstat_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kstat_kstat_open" >&5
+$as_echo "$ac_cv_lib_kstat_kstat_open" >&6; }
+if test "x$ac_cv_lib_kstat_kstat_open" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBKSTAT 1
+_ACEOF
+
+  LIBS="-lkstat $LIBS"
+
+fi
+
+test $ac_cv_lib_kstat_kstat_open = yes && ac_have_func=yes
+
+# Some systems with -lutil have (and need) -lkvm as well, some do not.
+# On Solaris, -lkvm requires nlist from -lelf, so check that first
+# to get the right answer into the cache.
+# For kstat on solaris, we need libelf to force the definition of SVR4 below.
+if test $ac_have_func = no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for elf_begin in -lelf" >&5
+$as_echo_n "checking for elf_begin in -lelf... " >&6; }
+if ${ac_cv_lib_elf_elf_begin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lelf  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char elf_begin ();
+int
+main ()
+{
+return elf_begin ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_elf_elf_begin=yes
+else
+  ac_cv_lib_elf_elf_begin=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_elf_elf_begin" >&5
+$as_echo "$ac_cv_lib_elf_elf_begin" >&6; }
+if test "x$ac_cv_lib_elf_elf_begin" = xyes; then :
+  LIBS="-lelf $LIBS"
+fi
+
+fi
+if test $ac_have_func = no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_open in -lkvm" >&5
+$as_echo_n "checking for kvm_open in -lkvm... " >&6; }
+if ${ac_cv_lib_kvm_kvm_open+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lkvm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kvm_open ();
+int
+main ()
+{
+return kvm_open ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_kvm_kvm_open=yes
+else
+  ac_cv_lib_kvm_kvm_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_open" >&5
+$as_echo "$ac_cv_lib_kvm_kvm_open" >&6; }
+if test "x$ac_cv_lib_kvm_kvm_open" = xyes; then :
+  LIBS="-lkvm $LIBS"
+fi
+
+  # Check for the 4.4BSD definition of getloadavg.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getloadavg in -lutil" >&5
+$as_echo_n "checking for getloadavg in -lutil... " >&6; }
+if ${ac_cv_lib_util_getloadavg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lutil  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getloadavg ();
+int
+main ()
+{
+return getloadavg ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_util_getloadavg=yes
+else
+  ac_cv_lib_util_getloadavg=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_getloadavg" >&5
+$as_echo "$ac_cv_lib_util_getloadavg" >&6; }
+if test "x$ac_cv_lib_util_getloadavg" = xyes; then :
+  LIBS="-lutil $LIBS" ac_have_func=yes ac_cv_func_getloadavg_setgid=yes
+fi
+
+fi
+
+if test $ac_have_func = no; then
+  # There is a commonly available library for RS/6000 AIX.
+  # Since it is not a standard part of AIX, it might be installed locally.
+  ac_getloadavg_LIBS=$LIBS
+  LIBS="-L/usr/local/lib $LIBS"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getloadavg in -lgetloadavg" >&5
+$as_echo_n "checking for getloadavg in -lgetloadavg... " >&6; }
+if ${ac_cv_lib_getloadavg_getloadavg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgetloadavg  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getloadavg ();
+int
+main ()
+{
+return getloadavg ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_getloadavg_getloadavg=yes
+else
+  ac_cv_lib_getloadavg_getloadavg=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_getloadavg_getloadavg" >&5
+$as_echo "$ac_cv_lib_getloadavg_getloadavg" >&6; }
+if test "x$ac_cv_lib_getloadavg_getloadavg" = xyes; then :
+  LIBS="-lgetloadavg $LIBS"
+else
+  LIBS=$ac_getloadavg_LIBS
+fi
+
+fi
+
+# Make sure it is really in the library, if we think we found it,
+# otherwise set up the replacement function.
+for ac_func in getloadavg
+do :
+  ac_fn_c_check_func "$LINENO" "getloadavg" "ac_cv_func_getloadavg"
+if test "x$ac_cv_func_getloadavg" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETLOADAVG 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" getloadavg.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getloadavg.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define C_GETLOADAVG 1" >>confdefs.h
+
+# Figure out what our getloadavg.c needs.
+ac_have_func=no
+ac_fn_c_check_header_mongrel "$LINENO" "sys/dg_sys_info.h" "ac_cv_header_sys_dg_sys_info_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_dg_sys_info_h" = xyes; then :
+  ac_have_func=yes
+
+$as_echo "#define DGUX 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dg_sys_info in -ldgc" >&5
+$as_echo_n "checking for dg_sys_info in -ldgc... " >&6; }
+if ${ac_cv_lib_dgc_dg_sys_info+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldgc  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dg_sys_info ();
+int
+main ()
+{
+return dg_sys_info ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dgc_dg_sys_info=yes
+else
+  ac_cv_lib_dgc_dg_sys_info=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dgc_dg_sys_info" >&5
+$as_echo "$ac_cv_lib_dgc_dg_sys_info" >&6; }
+if test "x$ac_cv_lib_dgc_dg_sys_info" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBDGC 1
+_ACEOF
+
+  LIBS="-ldgc $LIBS"
+
+fi
+
+fi
+
+
+
+ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default"
+if test "x$ac_cv_header_locale_h" = xyes; then :
+
+fi
+
+
+for ac_func in setlocale
+do :
+  ac_fn_c_check_func "$LINENO" "setlocale" "ac_cv_func_setlocale"
+if test "x$ac_cv_func_setlocale" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SETLOCALE 1
+_ACEOF
+
+fi
+done
+
+
+# We cannot check for <dwarf.h>, because Solaris 2 does not use dwarf (it
+# uses stabs), but it is still SVR4.  We cannot check for <elf.h> because
+# Irix 4.0.5F has the header but not the library.
+if test $ac_have_func = no && test "$ac_cv_lib_elf_elf_begin" = yes \
+    && test "$ac_cv_lib_kvm_kvm_open" = yes; then
+  ac_have_func=yes
+
+$as_echo "#define SVR4 1" >>confdefs.h
+
+fi
+
+if test $ac_have_func = no; then
+  ac_fn_c_check_header_mongrel "$LINENO" "inq_stats/cpustats.h" "ac_cv_header_inq_stats_cpustats_h" "$ac_includes_default"
+if test "x$ac_cv_header_inq_stats_cpustats_h" = xyes; then :
+  ac_have_func=yes
+
+$as_echo "#define UMAX 1" >>confdefs.h
+
+
+$as_echo "#define UMAX4_3 1" >>confdefs.h
+
+fi
+
+
+fi
+
+if test $ac_have_func = no; then
+  ac_fn_c_check_header_mongrel "$LINENO" "sys/cpustats.h" "ac_cv_header_sys_cpustats_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_cpustats_h" = xyes; then :
+  ac_have_func=yes; $as_echo "#define UMAX 1" >>confdefs.h
+
+fi
+
+
+fi
+
+if test $ac_have_func = no; then
+  for ac_header in mach/mach.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "mach/mach.h" "ac_cv_header_mach_mach_h" "$ac_includes_default"
+if test "x$ac_cv_header_mach_mach_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MACH_MACH_H 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+for ac_header in nlist.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "nlist.h" "ac_cv_header_nlist_h" "$ac_includes_default"
+if test "x$ac_cv_header_nlist_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_NLIST_H 1
+_ACEOF
+ ac_fn_c_check_member "$LINENO" "struct nlist" "n_un.n_name" "ac_cv_member_struct_nlist_n_un_n_name" "#include <nlist.h>
+"
+if test "x$ac_cv_member_struct_nlist_n_un_n_name" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_NLIST_N_UN_N_NAME 1
+_ACEOF
+
+
+$as_echo "#define NLIST_NAME_UNION 1" >>confdefs.h
+
+fi
+
+
+fi
+
+done
+
+fi
+done
+
+
+# Some definitions of getloadavg require that the program be installed setgid.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getloadavg requires setgid" >&5
+$as_echo_n "checking whether getloadavg requires setgid... " >&6; }
+if ${ac_cv_func_getloadavg_setgid+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include "$srcdir/$ac_config_libobj_dir/getloadavg.c"
+#ifdef LDAV_PRIVILEGED
+Yowza Am I SETGID yet
+#endif
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Yowza Am I SETGID yet" >/dev/null 2>&1; then :
+  ac_cv_func_getloadavg_setgid=yes
+else
+  ac_cv_func_getloadavg_setgid=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_getloadavg_setgid" >&5
+$as_echo "$ac_cv_func_getloadavg_setgid" >&6; }
+if test $ac_cv_func_getloadavg_setgid = yes; then
+  NEED_SETGID=true
+
+$as_echo "#define GETLOADAVG_PRIVILEGED 1" >>confdefs.h
+
+else
+  NEED_SETGID=false
+fi
+
+if test $ac_cv_func_getloadavg_setgid = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking group of /dev/kmem" >&5
+$as_echo_n "checking group of /dev/kmem... " >&6; }
+if ${ac_cv_group_kmem+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   # On Solaris, /dev/kmem is a symlink.  Get info on the real file.
+  ac_ls_output=`ls -lgL /dev/kmem 2>/dev/null`
+  # If we got an error (system does not support symlinks), try without -L.
+  test -z "$ac_ls_output" && ac_ls_output=`ls -lg /dev/kmem`
+  ac_cv_group_kmem=`$as_echo "$ac_ls_output" \
+    | sed -ne 's/[	 ][	 ]*/ /g;
+	       s/^.[sSrwx-]* *[0-9]* *\([^0-9]*\)  *.*/\1/;
+	       / /s/.* //;p;'`
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_group_kmem" >&5
+$as_echo "$ac_cv_group_kmem" >&6; }
+  KMEM_GROUP=$ac_cv_group_kmem
+fi
+if test "x$ac_save_LIBS" = x; then
+  GETLOADAVG_LIBS=$LIBS
+else
+  GETLOADAVG_LIBS=`$as_echo "$LIBS" | sed "s|$ac_save_LIBS||"`
+fi
+LIBS=$ac_save_LIBS
+
+
+
+# AC_FUNC_GETLOADAVG is documented to set the NLIST_STRUCT value, but it
+# doesn't.  So, we will.
+
+if test "$ac_cv_header_nlist_h" = yes; then :
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <nlist.h>
+int
+main ()
+{
+struct nlist nl;
+          nl.n_name = "string";
+          return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_nlist_struct=yes
+else
+  make_cv_nlist_struct=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  if test "$make_cv_nlist_struct" = yes; then :
+
+$as_echo "#define NLIST_STRUCT 1" >>confdefs.h
+
+
+fi
+
+fi
+
+ac_fn_c_check_decl "$LINENO" "sys_siglist" "ac_cv_have_decl_sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl_sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_SIGLIST $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "_sys_siglist" "ac_cv_have_decl__sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl__sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL__SYS_SIGLIST $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "__sys_siglist" "ac_cv_have_decl___sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl___sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL___SYS_SIGLIST $ac_have_decl
+_ACEOF
+
+
+
+# Check out the wait reality.
+for ac_header in sys/wait.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "sys/wait.h" "ac_cv_header_sys_wait_h" "#include <sys/types.h>
+"
+if test "x$ac_cv_header_sys_wait_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SYS_WAIT_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in waitpid wait3
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for union wait" >&5
+$as_echo_n "checking for union wait... " >&6; }
+if ${make_cv_union_wait+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/wait.h>
+int
+main ()
+{
+union wait status; int pid; pid = wait (&status);
+#ifdef WEXITSTATUS
+/* Some POSIXoid systems have both the new-style macros and the old
+   union wait type, and they do not work together.  If union wait
+   conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
+        if (WEXITSTATUS (status) != 0) pid = -1;
+#ifdef WTERMSIG
+        /* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
+        -- blow chunks here --
+#endif
+#endif
+#ifdef HAVE_WAITPID
+        /* Make sure union wait works with waitpid.  */
+        pid = waitpid (-1, &status, 0);
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  make_cv_union_wait=yes
+else
+  make_cv_union_wait=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_union_wait" >&5
+$as_echo "$make_cv_union_wait" >&6; }
+if test "$make_cv_union_wait" = yes; then :
+
+$as_echo "#define HAVE_UNION_WAIT 1" >>confdefs.h
+
+
+fi
+
+
+# If we're building on Windows/DOS/OS/2, add some support for DOS drive specs.
+if test "$PATH_SEPARATOR" = ';'; then :
+
+$as_echo "#define HAVE_DOS_PATHS 1" >>confdefs.h
+
+
+fi
+
+# See if the user wants to use pmake's "customs" distributed build capability
+ REMOTE=stub
+use_customs=false
+
+# Check whether --with-customs was given.
+if test "${with_customs+set}" = set; then :
+  withval=$with_customs;  case $withval in #(
+  n|no) :
+    : ;; #(
+  *) :
+    make_cppflags="$CPPFLAGS"
+     case $withval in #(
+  y|ye|yes) :
+    : ;; #(
+  *) :
+    CPPFLAGS="$CPPFLAGS -I$with_customs/include/customs"
+              make_ldflags="$LDFLAGS -L$with_customs/lib" ;;
+esac
+
+cf_test_netlibs=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for network libraries" >&5
+$as_echo_n "checking for network libraries... " >&6; }
+if ${cf_cv_netlibs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: working..." >&5
+$as_echo "working..." >&6; }
+cf_cv_netlibs=""
+cf_test_netlibs=yes
+for ac_func in gethostname
+do :
+  ac_fn_c_check_func "$LINENO" "gethostname" "ac_cv_func_gethostname"
+if test "x$ac_cv_func_gethostname" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETHOSTNAME 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostname in -lnsl" >&5
+$as_echo_n "checking for gethostname in -lnsl... " >&6; }
+if ${ac_cv_lib_nsl_gethostname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostname ();
+int
+main ()
+{
+return gethostname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_nsl_gethostname=yes
+else
+  ac_cv_lib_nsl_gethostname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostname" >&5
+$as_echo "$ac_cv_lib_nsl_gethostname" >&6; }
+if test "x$ac_cv_lib_nsl_gethostname" = xyes; then :
+
+
+cf_tr_func=`echo gethostname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostname=yes
+	cf_cv_netlibs="-lnsl $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostname=unknown
+	unset ac_cv_func_gethostname 2>/dev/null
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostname in -lsocket" >&5
+$as_echo_n "checking for gethostname in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_gethostname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostname ();
+int
+main ()
+{
+return gethostname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_socket_gethostname=yes
+else
+  ac_cv_lib_socket_gethostname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_gethostname" >&5
+$as_echo "$ac_cv_lib_socket_gethostname" >&6; }
+if test "x$ac_cv_lib_socket_gethostname" = xyes; then :
+
+
+cf_tr_func=`echo gethostname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostname=yes
+	cf_cv_netlibs="-lsocket $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostname=unknown
+	unset ac_cv_func_gethostname 2>/dev/null
+
+fi
+
+
+fi
+
+
+fi
+done
+
+#
+# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
+# I don't know the entrypoints - 97/7/22 TD
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -linet" >&5
+$as_echo_n "checking for main in -linet... " >&6; }
+if ${ac_cv_lib_inet_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-linet  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+return main ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_inet_main=yes
+else
+  ac_cv_lib_inet_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_inet_main" >&5
+$as_echo "$ac_cv_lib_inet_main" >&6; }
+if test "x$ac_cv_lib_inet_main" = xyes; then :
+  cf_cv_netlibs="-linet $cf_cv_netlibs"
+fi
+
+#
+if test "$ac_cv_func_lsocket" != no ; then
+for ac_func in socket
+do :
+  ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"
+if test "x$ac_cv_func_socket" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SOCKET 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5
+$as_echo_n "checking for socket in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_socket+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_socket_socket=yes
+else
+  ac_cv_lib_socket_socket=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_socket" >&5
+$as_echo "$ac_cv_lib_socket_socket" >&6; }
+if test "x$ac_cv_lib_socket_socket" = xyes; then :
+
+
+cf_tr_func=`echo socket | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_socket=yes
+	cf_cv_netlibs="-lsocket $cf_cv_netlibs"
+else
+
+	ac_cv_func_socket=unknown
+	unset ac_cv_func_socket 2>/dev/null
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lbsd" >&5
+$as_echo_n "checking for socket in -lbsd... " >&6; }
+if ${ac_cv_lib_bsd_socket+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbsd $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_bsd_socket=yes
+else
+  ac_cv_lib_bsd_socket=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_socket" >&5
+$as_echo "$ac_cv_lib_bsd_socket" >&6; }
+if test "x$ac_cv_lib_bsd_socket" = xyes; then :
+
+
+cf_tr_func=`echo socket | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_socket=yes
+	cf_cv_netlibs="-lbsd $cf_cv_netlibs"
+else
+
+	ac_cv_func_socket=unknown
+	unset ac_cv_func_socket 2>/dev/null
+
+fi
+
+
+fi
+
+
+fi
+done
+
+fi
+#
+for ac_func in gethostbyname
+do :
+  ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
+if test "x$ac_cv_func_gethostbyname" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETHOSTBYNAME 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
+$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
+if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
+int
+main ()
+{
+return gethostbyname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_nsl_gethostbyname=yes
+else
+  ac_cv_lib_nsl_gethostbyname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
+$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
+if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
+
+
+cf_tr_func=`echo gethostbyname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostbyname=yes
+	cf_cv_netlibs="-lnsl $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostbyname=unknown
+	unset ac_cv_func_gethostbyname 2>/dev/null
+
+fi
+
+
+fi
+done
+
+
+fi
+
+LIBS="$LIBS $cf_cv_netlibs"
+test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&6
+
+     ac_fn_c_check_header_mongrel "$LINENO" "customs.h" "ac_cv_header_customs_h" "$ac_includes_default"
+if test "x$ac_cv_header_customs_h" = xyes; then :
+  use_customs=true
+                      REMOTE=cstms
+                      LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags"
+else
+  with_customs=no
+                      CPPFLAGS="$make_cppflags" make_badcust=yes
+fi
+
+
+     ;;
+esac
+
+fi
+
+
+# Tell automake about this, so it can include the right .c files.
+ if test "$use_customs" = true; then
+  USE_CUSTOMS_TRUE=
+  USE_CUSTOMS_FALSE='#'
+else
+  USE_CUSTOMS_TRUE='#'
+  USE_CUSTOMS_FALSE=
+fi
+
+
+# See if the user asked to handle case insensitive file systems.
+
+# Check whether --enable-case-insensitive-file-system was given.
+if test "${enable_case_insensitive_file_system+set}" = set; then :
+  enableval=$enable_case_insensitive_file_system; if test "$enableval" = yes; then :
+  $as_echo "#define HAVE_CASE_INSENSITIVE_FS 1" >>confdefs.h
+
+fi
+fi
+
+
+# See if we can handle the job server feature, and if the user wants it.
+# Check whether --enable-job-server was given.
+if test "${enable_job_server+set}" = set; then :
+  enableval=$enable_job_server; make_cv_job_server="$enableval" user_job_server="$enableval"
+else
+  make_cv_job_server="yes"
+fi
+
+
+if test "$ac_cv_func_waitpid" = no && test "$ac_cv_func_wait3" = no; then :
+  has_wait_nohang=no
+else
+  has_wait_nohang=yes
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SA_RESTART" >&5
+$as_echo_n "checking for SA_RESTART... " >&6; }
+if ${make_cv_sa_restart+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <signal.h>
+int
+main ()
+{
+return SA_RESTART;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_sa_restart=yes
+else
+  make_cv_sa_restart=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sa_restart" >&5
+$as_echo "$make_cv_sa_restart" >&6; }
+
+if test "$make_cv_sa_restart" != no; then :
+
+$as_echo "#define HAVE_SA_RESTART 1" >>confdefs.h
+
+
+fi
+
+# Only allow jobserver on systems that support it
+case /$ac_cv_func_pipe/$ac_cv_func_sigaction/$make_cv_sa_restart/$has_wait_nohang/ in #(
+  */no/*) :
+    make_cv_job_server=no ;; #(
+  *) :
+     ;;
+esac
+
+# Also supported on OS2 and MinGW
+case $host_os in #(
+  os2*|mingw*) :
+    make_cv_job_server=yes ;; #(
+  *) :
+     ;;
+esac
+
+# If we support it and the user didn't disable it, build with jobserver
+case /$make_cv_job_server/$user_job_server/ in #(
+  */no/*) :
+    : no jobserver ;; #(
+  *) :
+
+$as_echo "#define MAKE_JOBSERVER 1" >>confdefs.h
+
+   ;;
+esac
+
+# If dl*() functions are supported we can enable the load operation
+ac_fn_c_check_decl "$LINENO" "dlopen" "ac_cv_have_decl_dlopen" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlopen" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLOPEN $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "dlsym" "ac_cv_have_decl_dlsym" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlsym" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLSYM $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "dlerror" "ac_cv_have_decl_dlerror" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlerror" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLERROR $ac_have_decl
+_ACEOF
+
+
+# Check whether --enable-load was given.
+if test "${enable_load+set}" = set; then :
+  enableval=$enable_load; make_cv_load="$enableval" user_load="$enableval"
+else
+  make_cv_load="yes"
+fi
+
+
+case /$ac_cv_have_decl_dlopen/$ac_cv_have_decl_dlsym/$ac_cv_have_decl_dlerror/ in #(
+  */no/*) :
+    make_cv_load=no ;; #(
+  *) :
+     ;;
+esac
+
+# We might need -ldl
+if test "$make_cv_load" = yes; then :
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_dlopen+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+  ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+  make_cv_load=
+fi
+
+
+fi
+
+case /$make_cv_load/$user_load/ in #(
+  */no/*) :
+    make_cv_load=no ;; #(
+  *) :
+
+$as_echo "#define MAKE_LOAD 1" >>confdefs.h
+
+   ;;
+esac
+
+# If we want load support, we might need to link with export-dynamic.
+# See if we can figure it out.  Unfortunately this is very difficult.
+# For example passing -rdynamic to the SunPRO linker gives a warning
+# but succeeds and creates a shared object, not an executable!
+if test "$make_cv_load" = yes; then :
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking If the linker accepts -Wl,--export-dynamic" >&5
+$as_echo_n "checking If the linker accepts -Wl,--export-dynamic... " >&6; }
+  old_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int main(){}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+     AM_LDFLAGS=-Wl,--export-dynamic
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+     { $as_echo "$as_me:${as_lineno-$LINENO}: checking If the linker accepts -rdynamic" >&5
+$as_echo_n "checking If the linker accepts -rdynamic... " >&6; }
+     LDFLAGS="$old_LDFLAGS -rdynamic"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int main(){}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+        AM_LDFLAGS=-rdynamic
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS="$old_LDFLAGS"
+
+fi
+
+# if we have both lstat() and readlink() then we can support symlink
+# timechecks.
+if test "$ac_cv_func_lstat" = yes && test "$ac_cv_func_readlink" = yes; then :
+
+$as_echo "#define MAKE_SYMLINKS 1" >>confdefs.h
+
+
+fi
+
+# Find the SCCS commands, so we can include them in our default rules.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for location of SCCS get command" >&5
+$as_echo_n "checking for location of SCCS get command... " >&6; }
+if ${make_cv_path_sccs_get+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  if test -f /usr/sccs/get; then :
+  make_cv_path_sccs_get=/usr/sccs/get
+else
+  make_cv_path_sccs_get=get
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_path_sccs_get" >&5
+$as_echo "$make_cv_path_sccs_get" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define SCCS_GET "$make_cv_path_sccs_get"
+_ACEOF
+
+
+ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
+if (/usr/sccs/admin -n s.conftest || admin -n s.conftest) >/dev/null 2>&1 &&
+   test -f s.conftest; then :
+   # We successfully created an SCCS file.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if SCCS get command understands -G" >&5
+$as_echo_n "checking if SCCS get command understands -G... " >&6; }
+if ${make_cv_sys_get_minus_G+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $make_cv_path_sccs_get -Gconftoast s.conftest >/dev/null 2>&1 &&
+            test -f conftoast; then :
+  make_cv_sys_get_minus_G=yes
+else
+  make_cv_sys_get_minus_G=no
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sys_get_minus_G" >&5
+$as_echo "$make_cv_sys_get_minus_G" >&6; }
+  if test "$make_cv_sys_get_minus_G" = yes; then :
+
+$as_echo "#define SCCS_GET_MINUS_G 1" >>confdefs.h
+
+
+fi
+
+fi
+rm -f s.conftest conftoast
+
+# Check the system to see if it provides GNU glob.  If not, use our
+# local version.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if system libc has GNU glob" >&5
+$as_echo_n "checking if system libc has GNU glob... " >&6; }
+if ${make_cv_sys_gnu_glob+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <features.h>
+#include <glob.h>
+#include <fnmatch.h>
+
+#define GLOB_INTERFACE_VERSION 1
+#if !defined _LIBC && defined __GNU_LIBRARY__ && __GNU_LIBRARY__ > 1
+# include <gnu-versions.h>
+# if _GNU_GLOB_INTERFACE_VERSION == GLOB_INTERFACE_VERSION
+   gnu glob
+# endif
+#endif
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "gnu glob" >/dev/null 2>&1; then :
+  make_cv_sys_gnu_glob=yes
+else
+  make_cv_sys_gnu_glob=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sys_gnu_glob" >&5
+$as_echo "$make_cv_sys_gnu_glob" >&6; }
+if test "$make_cv_sys_gnu_glob" = no; then :
+   GLOBINC='-I$(srcdir)/glob'
+  GLOBLIB=glob/libglob.a
+
+fi
+
+
+
+# Tell automake about this, so it can build the right .c files.
+ if test "$make_cv_sys_gnu_glob" = no; then
+  USE_LOCAL_GLOB_TRUE=
+  USE_LOCAL_GLOB_FALSE='#'
+else
+  USE_LOCAL_GLOB_TRUE='#'
+  USE_LOCAL_GLOB_FALSE=
+fi
+
+
+# Let the makefile know what our build host is
+
+
+cat >>confdefs.h <<_ACEOF
+#define MAKE_HOST "$host"
+_ACEOF
+
+MAKE_HOST="$host"
+
+
+w32_target_env=no
+ if false; then
+  WINDOWSENV_TRUE=
+  WINDOWSENV_FALSE='#'
+else
+  WINDOWSENV_TRUE='#'
+  WINDOWSENV_FALSE=
+fi
+
+
+case $host in #(
+  *-*-mingw32) :
+     if true; then
+  WINDOWSENV_TRUE=
+  WINDOWSENV_FALSE='#'
+else
+  WINDOWSENV_TRUE='#'
+  WINDOWSENV_FALSE=
+fi
+
+    w32_target_env=yes
+
+$as_echo "#define WINDOWS32 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DOS_PATHS 1" >>confdefs.h
+
+   ;; #(
+  *) :
+     ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define PATH_SEPARATOR_CHAR '$PATH_SEPARATOR'
+_ACEOF
+
+
+# Include the Maintainer's Makefile section, if it's here.
+
+MAINT_MAKEFILE=/dev/null
+if test -r "$srcdir/maintMakefile"; then :
+   MAINT_MAKEFILE="$srcdir/maintMakefile"
+
+fi
+
+
+# Allow building with dmalloc
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if malloc debugging is wanted" >&5
+$as_echo_n "checking if malloc debugging is wanted... " >&6; }
+
+# Check whether --with-dmalloc was given.
+if test "${with_dmalloc+set}" = set; then :
+  withval=$with_dmalloc; if test "$withval" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define WITH_DMALLOC 1" >>confdefs.h
+
+  LIBS="$LIBS -ldmalloc"
+  LDFLAGS="$LDFLAGS -g"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# Forcibly disable SET_MAKE.  If it's set it breaks things like the test
+# scripts, etc.
+SET_MAKE=
+
+# Sanity check and inform the user of what we found
+
+if test "x$make_badcust" = xyes; then :
+
+echo
+echo "WARNING: --with-customs specified but no customs.h could be found;"
+echo "         disabling Customs support."
+echo
+
+fi
+
+case $with_customs in #(
+  ""|n|no|y|ye|yes) :
+    : ;; #(
+  *) :
+    if test -f "$with_customs/lib/libcustoms.a"; then :
+  :
+else
+   echo
+  echo "WARNING: '$with_customs/lib' does not appear to contain the"
+  echo "         Customs library.  You must build and install Customs"
+  echo "         before compiling GNU make."
+  echo
+
+fi ;;
+esac
+
+if test "x$has_wait_nohang" = xno; then :
+   echo
+  echo "WARNING: Your system has neither waitpid() nor wait3()."
+  echo "         Without one of these, signal handling is unreliable."
+  echo "         You should be aware that running GNU make with -j"
+  echo "         could result in erratic behavior."
+  echo
+
+fi
+
+if test "x$make_cv_job_server" = xno && test "x$user_job_server" = xyes; then :
+   echo
+  echo "WARNING: Make job server requires a POSIX-ish system that"
+  echo "         supports the pipe(), sigaction(), and either"
+  echo "         waitpid() or wait3() functions.  Your system doesn't"
+  echo "         appear to provide one or more of those."
+  echo "         Disabling job server support."
+  echo
+
+fi
+
+if test "x$make_cv_load" = xno && test "x$user_load" = xyes; then :
+   echo
+  echo "WARNING: 'load' support requires a POSIX-ish system that"
+  echo "         supports the dlopen(), dlsym(), and dlerror() functions."
+  echo "         Your system doesn't appear to provide one or more of these."
+  echo "         Disabling 'load' support."
+  echo
+
+fi
+
+# Specify what files are to be created.
+ac_config_files="$ac_config_files Makefile glob/Makefile po/Makefile.in config/Makefile doc/Makefile w32/Makefile tests/config-flags.pm"
+
+
+# OK, do it!
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GUILE_TRUE}" && test -z "${HAVE_GUILE_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_GUILE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_CUSTOMS_TRUE}" && test -z "${USE_CUSTOMS_FALSE}"; then
+  as_fn_error $? "conditional \"USE_CUSTOMS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_LOCAL_GLOB_TRUE}" && test -z "${USE_LOCAL_GLOB_FALSE}"; then
+  as_fn_error $? "conditional \"USE_LOCAL_GLOB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WINDOWSENV_TRUE}" && test -z "${WINDOWSENV_FALSE}"; then
+  as_fn_error $? "conditional \"WINDOWSENV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WINDOWSENV_TRUE}" && test -z "${WINDOWSENV_FALSE}"; then
+  as_fn_error $? "conditional \"WINDOWSENV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by GNU make $as_me 4.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-make@gnu.org>.
+GNU make home page: <http://www.gnu.org/software/make/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+GNU make config.status 4.1
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+    # from automake < 1.5.
+    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "glob/Makefile") CONFIG_FILES="$CONFIG_FILES glob/Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+    "config/Makefile") CONFIG_FILES="$CONFIG_FILES config/Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "w32/Makefile") CONFIG_FILES="$CONFIG_FILES w32/Makefile" ;;
+    "tests/config-flags.pm") CONFIG_FILES="$CONFIG_FILES tests/config-flags.pm" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+if $AWK 'BEGIN { getline <"/dev/null" }' </dev/null 2>/dev/null; then
+  ac_cs_awk_getline=:
+  ac_cs_awk_pipe_init=
+  ac_cs_awk_read_file='
+      while ((getline aline < (F[key])) > 0)
+	print(aline)
+      close(F[key])'
+  ac_cs_awk_pipe_fini=
+else
+  ac_cs_awk_getline=false
+  ac_cs_awk_pipe_init="print \"cat <<'|#_!!_#|' &&\""
+  ac_cs_awk_read_file='
+      print "|#_!!_#|"
+      print "cat " F[key] " &&"
+      '$ac_cs_awk_pipe_init
+  # The final `:' finishes the AND list.
+  ac_cs_awk_pipe_fini='END { print "|#_!!_#|"; print ":" }'
+fi
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+# Create commands to substitute file output variables.
+{
+  echo "cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1" &&
+  echo 'cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&' &&
+  echo "$ac_subst_files" | sed 's/.*/F["&"]="$&"/' &&
+  echo "_ACAWK" &&
+  echo "_ACEOF"
+} >conf$$files.sh &&
+. ./conf$$files.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+rm -f conf$$files.sh
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+  \$ac_cs_awk_pipe_init
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+  if (nfields == 3 && !substed) {
+    key = field[2]
+    if (F[key] != "" && line ~ /^[	 ]*@.*@[	 ]*$/) {
+      \$ac_cs_awk_read_file
+      next
+    }
+  }
+  print line
+}
+\$ac_cs_awk_pipe_fini
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" |
+if $ac_cs_awk_getline; then
+  $AWK -f "$ac_tmp/subs.awk"
+else
+  $AWK -f "$ac_tmp/subs.awk" | $SHELL
+fi \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "po-directories":C)
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assigment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            # Hide the ALL_LINGUAS assigment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
+# We only generate the build.sh if we have a build.sh.in; we won't have
+# one before we've created a distribution.
+if test -f "$srcdir/build.sh.in"; then :
+   ./config.status --file build.sh
+  chmod +x build.sh
+
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..fab9a2d
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,525 @@
+# Process this file with autoconf to produce a configure script.
+#
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AC_INIT([GNU make],[4.1],[bug-make@gnu.org])
+
+AC_PREREQ([2.62])
+
+# Autoconf setup
+AC_CONFIG_AUX_DIR([config])
+AC_CONFIG_SRCDIR([vpath.c])
+AC_CONFIG_HEADERS([config.h])
+
+# Automake setup
+# We have to enable "foreign" because ChangeLog is auto-generated
+# We cannot enable -Werror because gettext 0.18.1 has invalid content
+# When we update gettext to 0.18.3 or better we can add it again.
+AM_INIT_AUTOMAKE([1.11.1 silent-rules foreign -Wall])
+
+# Checks for programs.
+AC_USE_SYSTEM_EXTENSIONS
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_RANLIB
+AC_PROG_CPP
+AC_CHECK_PROG([AR], [ar], [ar], [ar])
+# Perl is needed for the test suite (only)
+AC_CHECK_PROG([PERL], [perl], [perl], [perl])
+
+# Needed for w32/Makefile.am
+AM_PROG_AR
+
+# Specialized system macros
+AC_CANONICAL_HOST
+AC_AIX
+AC_ISC_POSIX
+AC_MINIX
+
+# Enable gettext, in "external" mode.
+AM_GNU_GETTEXT_VERSION([0.18.1])
+AM_GNU_GETTEXT([external])
+
+# This test must come as early as possible after the compiler configuration
+# tests, because the choice of the file model can (in principle) affect
+# whether functions and headers are available, whether they work, etc.
+AC_SYS_LARGEFILE
+
+# Checks for libraries.
+AC_SEARCH_LIBS([getpwnam], [sun])
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_HEADER_DIRENT
+AC_HEADER_STAT
+AC_HEADER_TIME
+AC_CHECK_HEADERS([stdlib.h locale.h unistd.h limits.h fcntl.h string.h \
+                  memory.h sys/param.h sys/resource.h sys/time.h sys/timeb.h])
+
+AM_PROG_CC_C_O
+AC_C_CONST
+AC_TYPE_SIGNAL
+AC_TYPE_UID_T
+AC_TYPE_PID_T
+
+# Find some definition for uintmax_t
+
+AC_CHECK_TYPE([uintmax_t],[],
+[ uintmax_t="unsigned long"
+  AC_CHECK_TYPE([unsigned long long],[uintmax_t="unsigned long long"])
+  AC_DEFINE_UNQUOTED([uintmax_t], [$uintmax_t],
+    [Define uintmax_t if not defined in <stdint.h> or <inttypes.h>.])
+])
+
+# Find out whether our struct stat returns nanosecond resolution timestamps.
+
+AC_STRUCT_ST_MTIM_NSEC
+AC_CACHE_CHECK([whether to use high resolution file timestamps],
+               [make_cv_file_timestamp_hi_res],
+[ make_cv_file_timestamp_hi_res=no
+  AS_IF([test "$ac_cv_struct_st_mtim_nsec" != no],
+        [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif]],
+                      [[char a[0x7fffffff < (uintmax_t)-1 >> 30 ? 1 : -1];]])],
+        [make_cv_file_timestamp_hi_res=yes])
+  ])])
+AS_IF([test "$make_cv_file_timestamp_hi_res" = yes], [val=1], [val=0])
+AC_DEFINE_UNQUOTED([FILE_TIMESTAMP_HI_RES], [$val],
+                   [Use high resolution file timestamps if nonzero.])
+
+AS_IF([test "$make_cv_file_timestamp_hi_res" = yes],
+[ # Solaris 2.5.1 needs -lposix4 to get the clock_gettime function.
+  # Solaris 7 prefers the library name -lrt to the obsolescent name -lposix4.
+  AC_SEARCH_LIBS([clock_gettime], [rt posix4])
+  AS_IF([test "$ac_cv_search_clock_gettime" != no],
+  [ AC_DEFINE([HAVE_CLOCK_GETTIME], [1],
+              [Define to 1 if you have the clock_gettime function.])
+  ])
+])
+
+# Check for DOS-style pathnames.
+pds_AC_DOS_PATHS
+
+# See if we have a standard version of gettimeofday().  Since actual
+# implementations can differ, just make sure we have the most common
+# one.
+AC_CACHE_CHECK([for standard gettimeofday], [ac_cv_func_gettimeofday],
+  [ac_cv_func_gettimeofday=no
+   AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <sys/time.h>
+                  int main ()
+                  {
+                    struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
+                    exit (gettimeofday (&t, 0) != 0
+                          || t.tv_sec < 0 || t.tv_usec < 0);
+                  }]])],
+                  [ac_cv_func_gettimeofday=yes],
+                  [ac_cv_func_gettimeofday=no],
+                  [ac_cv_func_gettimeofday="no (cross-compiling)"])])
+AS_IF([test "$ac_cv_func_gettimeofday" = yes],
+[ AC_DEFINE([HAVE_GETTIMEOFDAY], [1],
+            [Define to 1 if you have a standard gettimeofday function])
+])
+
+AC_CHECK_FUNCS([strdup strndup mkstemp mktemp fdopen fileno \
+                dup dup2 getcwd realpath sigsetmask sigaction \
+                getgroups seteuid setegid setlinebuf setreuid setregid \
+                getrlimit setrlimit setvbuf pipe strerror strsignal \
+                lstat readlink atexit isatty ttyname])
+
+# We need to check declarations, not just existence, because on Tru64 this
+# function is not declared without special flags, which themselves cause
+# other problems.  We'll just use our own.
+AC_CHECK_DECLS([bsd_signal], [], [], [[#define _GNU_SOURCE 1
+#include <signal.h>]])
+
+AC_FUNC_SETVBUF_REVERSED
+
+# Rumor has it that strcasecmp lives in -lresolv on some odd systems.
+# It doesn't hurt much to use our own if we can't find it so I don't
+# make the effort here.
+AC_CHECK_FUNCS([strcasecmp strncasecmp strcmpi strncmpi stricmp strnicmp])
+
+# strcoll() is used by the GNU glob library
+AC_FUNC_STRCOLL
+
+AC_FUNC_ALLOCA
+AC_FUNC_CLOSEDIR_VOID
+
+# See if the user wants to add (or not) GNU Guile support
+PKG_PROG_PKG_CONFIG
+AC_ARG_WITH([guile], [AS_HELP_STRING([--with-guile],
+            [Support GNU Guile for embedded scripting])])
+
+# For some strange reason, at least on Ubuntu, each version of Guile
+# comes with it's own PC file so we have to specify them as individual
+# packages.  Ugh.
+AS_IF([test "x$with_guile" != xno],
+[ PKG_CHECK_MODULES([GUILE], [guile-2.0], [have_guile=yes],
+  [PKG_CHECK_MODULES([GUILE], [guile-1.8], [have_guile=yes],
+    [have_guile=no])])
+])
+
+AS_IF([test "$have_guile" = yes],
+      [AC_DEFINE([HAVE_GUILE], [1], [Embed GNU Guile support])])
+
+AM_CONDITIONAL([HAVE_GUILE], [test "$have_guile" = yes])
+
+AC_FUNC_GETLOADAVG
+
+# AC_FUNC_GETLOADAVG is documented to set the NLIST_STRUCT value, but it
+# doesn't.  So, we will.
+
+AS_IF([test "$ac_cv_header_nlist_h" = yes],
+[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <nlist.h>]],
+        [[struct nlist nl;
+          nl.n_name = "string";
+          return 0;]])],
+        [make_cv_nlist_struct=yes],
+        [make_cv_nlist_struct=no])
+  AS_IF([test "$make_cv_nlist_struct" = yes],
+  [ AC_DEFINE([NLIST_STRUCT], [1],
+       [Define to 1 if struct nlist.n_name is a pointer rather than an array.])
+  ])
+])
+
+AC_CHECK_DECLS([sys_siglist, _sys_siglist, __sys_siglist], , ,
+  [AC_INCLUDES_DEFAULT
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+])
+
+
+# Check out the wait reality.
+AC_CHECK_HEADERS([sys/wait.h],[],[],[[#include <sys/types.h>]])
+AC_CHECK_FUNCS([waitpid wait3])
+AC_CACHE_CHECK([for union wait], [make_cv_union_wait],
+[ AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h>
+#include <sys/wait.h>]],
+     [[union wait status; int pid; pid = wait (&status);
+#ifdef WEXITSTATUS
+/* Some POSIXoid systems have both the new-style macros and the old
+   union wait type, and they do not work together.  If union wait
+   conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
+        if (WEXITSTATUS (status) != 0) pid = -1;
+#ifdef WTERMSIG
+        /* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
+        -- blow chunks here --
+#endif
+#endif
+#ifdef HAVE_WAITPID
+        /* Make sure union wait works with waitpid.  */
+        pid = waitpid (-1, &status, 0);
+#endif
+      ]])],
+    [make_cv_union_wait=yes],
+    [make_cv_union_wait=no])
+])
+AS_IF([test "$make_cv_union_wait" = yes],
+[ AC_DEFINE([HAVE_UNION_WAIT], [1],
+            [Define to 1 if you have the 'union wait' type in <sys/wait.h>.])
+])
+
+
+# If we're building on Windows/DOS/OS/2, add some support for DOS drive specs.
+AS_IF([test "$PATH_SEPARATOR" = ';'],
+[ AC_DEFINE([HAVE_DOS_PATHS], [1],
+            [Define to 1 if your system requires backslashes or drive specs in pathnames.])
+])
+
+# See if the user wants to use pmake's "customs" distributed build capability
+AC_SUBST([REMOTE]) REMOTE=stub
+use_customs=false
+AC_ARG_WITH([customs],
+[AC_HELP_STRING([--with-customs=DIR],
+                [enable remote jobs via Customs--see README.customs])],
+[ AS_CASE([$withval], [n|no], [:],
+    [make_cppflags="$CPPFLAGS"
+     AS_CASE([$withval],
+             [y|ye|yes], [:],
+             [CPPFLAGS="$CPPFLAGS -I$with_customs/include/customs"
+              make_ldflags="$LDFLAGS -L$with_customs/lib"])
+     CF_NETLIBS
+     AC_CHECK_HEADER([customs.h],
+                     [use_customs=true
+                      REMOTE=cstms
+                      LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags"],
+                     [with_customs=no
+                      CPPFLAGS="$make_cppflags" make_badcust=yes])
+    ])
+])
+
+# Tell automake about this, so it can include the right .c files.
+AM_CONDITIONAL([USE_CUSTOMS], [test "$use_customs" = true])
+
+# See if the user asked to handle case insensitive file systems.
+AH_TEMPLATE([HAVE_CASE_INSENSITIVE_FS], [Use case insensitive file names])
+AC_ARG_ENABLE([case-insensitive-file-system],
+  AC_HELP_STRING([--enable-case-insensitive-file-system],
+                 [assume file systems are case insensitive]),
+  [AS_IF([test "$enableval" = yes], [AC_DEFINE([HAVE_CASE_INSENSITIVE_FS])])])
+
+# See if we can handle the job server feature, and if the user wants it.
+AC_ARG_ENABLE([job-server],
+  AC_HELP_STRING([--disable-job-server],
+                 [disallow recursive make communication during -jN]),
+  [make_cv_job_server="$enableval" user_job_server="$enableval"],
+  [make_cv_job_server="yes"])
+
+AS_IF([test "$ac_cv_func_waitpid" = no && test "$ac_cv_func_wait3" = no],
+      [has_wait_nohang=no],
+      [has_wait_nohang=yes])
+
+AC_CACHE_CHECK([for SA_RESTART], [make_cv_sa_restart], [
+  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <signal.h>]],
+      [[return SA_RESTART;]])],
+    [make_cv_sa_restart=yes],
+    [make_cv_sa_restart=no])])
+
+AS_IF([test "$make_cv_sa_restart" != no],
+[ AC_DEFINE([HAVE_SA_RESTART], [1],
+     [Define to 1 if <signal.h> defines the SA_RESTART constant.])
+])
+
+# Only allow jobserver on systems that support it
+AS_CASE([/$ac_cv_func_pipe/$ac_cv_func_sigaction/$make_cv_sa_restart/$has_wait_nohang/],
+  [*/no/*], [make_cv_job_server=no])
+
+# Also supported on OS2 and MinGW
+AS_CASE([$host_os], [os2*|mingw*], [make_cv_job_server=yes])
+
+# If we support it and the user didn't disable it, build with jobserver
+AS_CASE([/$make_cv_job_server/$user_job_server/],
+  [*/no/*], [: no jobserver],
+  [AC_DEFINE(MAKE_JOBSERVER, 1,
+             [Define to 1 to enable job server support in GNU make.])
+  ])
+
+# If dl*() functions are supported we can enable the load operation
+AC_CHECK_DECLS([dlopen, dlsym, dlerror], [], [],
+  [[#include <dlfcn.h>]])
+
+AC_ARG_ENABLE([load],
+  AC_HELP_STRING([--disable-load],
+                 [disable support for the 'load' operation]),
+  [make_cv_load="$enableval" user_load="$enableval"],
+  [make_cv_load="yes"])
+
+AS_CASE([/$ac_cv_have_decl_dlopen/$ac_cv_have_decl_dlsym/$ac_cv_have_decl_dlerror/],
+  [*/no/*], [make_cv_load=no])
+
+# We might need -ldl
+AS_IF([test "$make_cv_load" = yes], [
+  AC_SEARCH_LIBS([dlopen], [dl], [], [make_cv_load=])
+  ])
+
+AS_CASE([/$make_cv_load/$user_load/],
+  [*/no/*], [make_cv_load=no],
+  [AC_DEFINE(MAKE_LOAD, 1,
+             [Define to 1 to enable 'load' support in GNU make.])
+  ])
+
+# If we want load support, we might need to link with export-dynamic.
+# See if we can figure it out.  Unfortunately this is very difficult.
+# For example passing -rdynamic to the SunPRO linker gives a warning
+# but succeeds and creates a shared object, not an executable!
+AS_IF([test "$make_cv_load" = yes], [
+  AC_MSG_CHECKING([If the linker accepts -Wl,--export-dynamic])
+  old_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+  AC_LINK_IFELSE([AC_LANG_SOURCE([int main(){}])],
+    [AC_MSG_RESULT([yes])
+     AC_SUBST([AM_LDFLAGS], [-Wl,--export-dynamic])],
+    [AC_MSG_RESULT([no])
+     AC_MSG_CHECKING([If the linker accepts -rdynamic])
+     LDFLAGS="$old_LDFLAGS -rdynamic"
+     AC_LINK_IFELSE([AC_LANG_SOURCE([int main(){}])],
+       [AC_MSG_RESULT([yes])
+        AC_SUBST([AM_LDFLAGS], [-rdynamic])],
+       [AC_MSG_RESULT([no])])
+   ])
+  LDFLAGS="$old_LDFLAGS"
+])
+
+# if we have both lstat() and readlink() then we can support symlink
+# timechecks.
+AS_IF([test "$ac_cv_func_lstat" = yes && test "$ac_cv_func_readlink" = yes],
+  [ AC_DEFINE([MAKE_SYMLINKS], [1],
+              [Define to 1 to enable symbolic link timestamp checking.])
+])
+
+# Find the SCCS commands, so we can include them in our default rules.
+
+AC_CACHE_CHECK([for location of SCCS get command], [make_cv_path_sccs_get], [
+  AS_IF([test -f /usr/sccs/get],
+        [make_cv_path_sccs_get=/usr/sccs/get],
+        [make_cv_path_sccs_get=get])
+])
+AC_DEFINE_UNQUOTED([SCCS_GET], ["$make_cv_path_sccs_get"],
+                   [Define to the name of the SCCS 'get' command.])
+
+ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
+AS_IF([(/usr/sccs/admin -n s.conftest || admin -n s.conftest) >/dev/null 2>&1 &&
+   test -f s.conftest],
+[ # We successfully created an SCCS file.
+  AC_CACHE_CHECK([if SCCS get command understands -G], [make_cv_sys_get_minus_G],
+    [AS_IF([$make_cv_path_sccs_get -Gconftoast s.conftest >/dev/null 2>&1 &&
+            test -f conftoast],
+           [make_cv_sys_get_minus_G=yes],
+           [make_cv_sys_get_minus_G=no])
+    ])
+  AS_IF([test "$make_cv_sys_get_minus_G" = yes],
+    [AC_DEFINE([SCCS_GET_MINUS_G], [1],
+     [Define to 1 if the SCCS 'get' command understands the '-G<file>' option.])
+    ])
+])
+rm -f s.conftest conftoast
+
+# Check the system to see if it provides GNU glob.  If not, use our
+# local version.
+AC_CACHE_CHECK([if system libc has GNU glob], [make_cv_sys_gnu_glob],
+[ AC_EGREP_CPP([gnu glob],[
+#include <features.h>
+#include <glob.h>
+#include <fnmatch.h>
+
+#define GLOB_INTERFACE_VERSION 1
+#if !defined _LIBC && defined __GNU_LIBRARY__ && __GNU_LIBRARY__ > 1
+# include <gnu-versions.h>
+# if _GNU_GLOB_INTERFACE_VERSION == GLOB_INTERFACE_VERSION
+   gnu glob
+# endif
+#endif],
+        [make_cv_sys_gnu_glob=yes],
+        [make_cv_sys_gnu_glob=no])])
+AS_IF([test "$make_cv_sys_gnu_glob" = no],
+[ GLOBINC='-I$(srcdir)/glob'
+  GLOBLIB=glob/libglob.a
+])
+AC_SUBST([GLOBINC])
+AC_SUBST([GLOBLIB])
+
+# Tell automake about this, so it can build the right .c files.
+AM_CONDITIONAL([USE_LOCAL_GLOB], [test "$make_cv_sys_gnu_glob" = no])
+
+# Let the makefile know what our build host is
+
+AC_DEFINE_UNQUOTED([MAKE_HOST],["$host"],[Build host information.])
+MAKE_HOST="$host"
+AC_SUBST([MAKE_HOST])
+
+w32_target_env=no
+AM_CONDITIONAL([WINDOWSENV], [false])
+
+AS_CASE([$host],
+  [*-*-mingw32],
+   [AM_CONDITIONAL([WINDOWSENV], [true])
+    w32_target_env=yes
+    AC_DEFINE([WINDOWS32], [1], [Use platform specific coding])
+    AC_DEFINE([HAVE_DOS_PATHS], [1], [Use platform specific coding])
+  ])
+
+AC_DEFINE_UNQUOTED([PATH_SEPARATOR_CHAR],['$PATH_SEPARATOR'],
+        [Define to the character that separates directories in PATH.])
+
+# Include the Maintainer's Makefile section, if it's here.
+
+MAINT_MAKEFILE=/dev/null
+AS_IF([test -r "$srcdir/maintMakefile"],
+[ MAINT_MAKEFILE="$srcdir/maintMakefile"
+])
+AC_SUBST_FILE([MAINT_MAKEFILE])
+
+# Allow building with dmalloc
+AM_WITH_DMALLOC
+
+# Forcibly disable SET_MAKE.  If it's set it breaks things like the test
+# scripts, etc.
+SET_MAKE=
+
+# Sanity check and inform the user of what we found
+
+AS_IF([test "x$make_badcust" = xyes], [
+echo
+echo "WARNING: --with-customs specified but no customs.h could be found;"
+echo "         disabling Customs support."
+echo
+])
+
+AS_CASE([$with_customs],
+[""|n|no|y|ye|yes], [:],
+[AS_IF([test -f "$with_customs/lib/libcustoms.a"], [:],
+[ echo
+  echo "WARNING: '$with_customs/lib' does not appear to contain the"
+  echo "         Customs library.  You must build and install Customs"
+  echo "         before compiling GNU make."
+  echo
+])])
+
+AS_IF([test "x$has_wait_nohang" = xno],
+[ echo
+  echo "WARNING: Your system has neither waitpid() nor wait3()."
+  echo "         Without one of these, signal handling is unreliable."
+  echo "         You should be aware that running GNU make with -j"
+  echo "         could result in erratic behavior."
+  echo
+])
+
+AS_IF([test "x$make_cv_job_server" = xno && test "x$user_job_server" = xyes],
+[ echo
+  echo "WARNING: Make job server requires a POSIX-ish system that"
+  echo "         supports the pipe(), sigaction(), and either"
+  echo "         waitpid() or wait3() functions.  Your system doesn't"
+  echo "         appear to provide one or more of those."
+  echo "         Disabling job server support."
+  echo
+])
+
+AS_IF([test "x$make_cv_load" = xno && test "x$user_load" = xyes],
+[ echo
+  echo "WARNING: 'load' support requires a POSIX-ish system that"
+  echo "         supports the dlopen(), dlsym(), and dlerror() functions."
+  echo "         Your system doesn't appear to provide one or more of these."
+  echo "         Disabling 'load' support."
+  echo
+])
+
+# Specify what files are to be created.
+AC_CONFIG_FILES([Makefile glob/Makefile po/Makefile.in config/Makefile \
+                 doc/Makefile w32/Makefile tests/config-flags.pm])
+
+# OK, do it!
+
+AC_OUTPUT
+
+# We only generate the build.sh if we have a build.sh.in; we won't have
+# one before we've created a distribution.
+AS_IF([test -f "$srcdir/build.sh.in"],
+[ ./config.status --file build.sh
+  chmod +x build.sh
+])
+
+dnl Local Variables:
+dnl comment-start: "dnl "
+dnl comment-end: ""
+dnl comment-start-skip: "\\bdnl\\b\\s *"
+dnl compile-command: "make configure config.h.in"
+dnl End:
diff --git a/configure.bat b/configure.bat
new file mode 100644
index 0000000..e54ba84
--- /dev/null
+++ b/configure.bat
@@ -0,0 +1,60 @@
+@echo off

+rem Copyright (C) 1994-2014 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

+

+echo Configuring MAKE for DJGPP

+

+rem The SmallEnv trick protects against too small environment block,

+rem in which case the values will be truncated and the whole thing

+rem goes awry.  COMMAND.COM will say "Out of environment space", but

+rem many people don't care, so we force them to care by refusing to go.

+

+rem Where is the srcdir?

+set XSRC=.

+if not "%XSRC%"=="." goto SmallEnv

+if "%1%"=="" goto SrcDone

+set XSRC=%1

+if not "%XSRC%"=="%1" goto SmallEnv

+

+:SrcDone

+

+update %XSRC%/configh.dos ./config.h

+

+rem Do they have Make?

+redir -o junk.$$$ -eo make -n -f NUL

+rem REDIR will return 1 if it cannot run Make.

+rem If it can run Make, it will usually return 2,

+rem but 0 is also OK with us.

+if errorlevel 2 goto MakeOk

+if not errorlevel 1 goto MakeOk

+if exist junk.$$$ del junk.$$$

+echo No Make program found--use DOSBUILD.BAT to build Make.

+goto End

+

+rem They do have Make.	Generate the Makefile.

+

+:MakeOk

+del junk.$$$

+update %XSRC%/Makefile.DOS ./Makefile

+echo Done.

+if not "%XSRC%"=="." echo Invoke Make thus: "make srcdir=%XSRC%"

+goto End

+

+:SmallEnv

+echo Your environment is too small.  Please enlarge it and run me again.

+

+:End

+set XRSC=

diff --git a/debug.h b/debug.h
new file mode 100644
index 0000000..9d2ec04
--- /dev/null
+++ b/debug.h
@@ -0,0 +1,37 @@
+/* Debugging macros and interface.
+Copyright (C) 1999-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#define DB_NONE         (0x000)
+#define DB_BASIC        (0x001)
+#define DB_VERBOSE      (0x002)
+#define DB_JOBS         (0x004)
+#define DB_IMPLICIT     (0x008)
+#define DB_MAKEFILES    (0x100)
+
+#define DB_ALL          (0xfff)
+
+extern int db_level;
+
+#define ISDB(_l)    ((_l)&db_level)
+
+#define DBS(_l,_x)  do{ if(ISDB(_l)) {print_spaces (depth); \
+                                      printf _x; fflush (stdout);} }while(0)
+
+#define DBF(_l,_x)  do{ if(ISDB(_l)) {print_spaces (depth); \
+                                      printf (_x, file->name); \
+                                      fflush (stdout);} }while(0)
+
+#define DB(_l,_x)   do{ if(ISDB(_l)) {printf _x; fflush (stdout);} }while(0)
diff --git a/default.c b/default.c
new file mode 100644
index 0000000..3b6f7ae
--- /dev/null
+++ b/default.c
@@ -0,0 +1,663 @@
+/* Data base of default implicit rules for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "filedef.h"
+#include "variable.h"
+#include "rule.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+
+/* Define GCC_IS_NATIVE if gcc is the native development environment on
+   your system (gcc/bison/flex vs cc/yacc/lex).  */
+#if defined(__MSDOS__) || defined(__EMX__)
+# define GCC_IS_NATIVE
+#endif
+
+
+/* This is the default list of suffixes for suffix rules.
+   '.s' must come last, so that a '.o' file will be made from
+   a '.c' or '.p' or ... file rather than from a .s file.  */
+
+static char default_suffixes[]
+#ifdef VMS
+  /* VMS should include all UNIX/POSIX + some VMS extensions */
+  = ".out .exe .a .olb .hlb .tlb .mlb .ln .o .obj .c .cxx .cc .cpp .pas .p \
+.for .f .r .y .l .ym .yl .mar .s .ss .i .ii .mod .sym .def .h .info .dvi \
+.tex .texinfo .texi .txinfo .mem .hlp .brn .rnh .rno .rnt .rnx .w .ch .cweb \
+.web .com .sh .elc .el";
+#elif defined(__EMX__)
+  = ".out .a .ln .o .c .cc .C .cpp .p .f .F .m .r .y .l .ym .yl .s .S \
+.mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
+.w .ch .web .sh .elc .el .obj .exe .dll .lib";
+#else
+  = ".out .a .ln .o .c .cc .C .cpp .p .f .F .m .r .y .l .ym .yl .s .S \
+.mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
+.w .ch .web .sh .elc .el";
+#endif
+
+static struct pspec default_pattern_rules[] =
+  {
+#ifdef VMS
+    { "(%)", "%",
+        "@if f$$search(\"$@\") .eqs. \"\" then $(LIBRARY)/CREATE/"
+         "$(or "
+          "$(patsubst %,TEXT,$(filter %.tlb %.TLB,$@)),"
+          "$(patsubst %,HELP,$(filter %.hlb %.HLB,$@)),"
+          "$(patsubst %,MACRO,$(filter %.mlb %.MLB,$@)),"
+          "$(and "
+           "$(patsubst %,SHARE,$(filter %.olb %.OLB,$@)),"
+           "$(patsubst %,SHARE,$(filter %.exe %.EXE,$<))),"
+          "OBJECT)"
+         " $@\n"
+        "$(AR) $(ARFLAGS) $@ $<" },
+
+#else
+    { "(%)", "%",
+        "$(AR) $(ARFLAGS) $@ $<" },
+#endif
+    /* The X.out rules are only in BSD's default set because
+       BSD Make has no null-suffix rules, so 'foo.out' and
+       'foo' are the same thing.  */
+#ifdef VMS
+    { "%.exe", "%",
+        "$(CP) $< $@" },
+
+#endif
+    { "%.out", "%",
+        "@rm -f $@ \n cp $< $@" },
+
+    /* Syntax is "ctangle foo.w foo.ch foo.c".  */
+    { "%.c", "%.w %.ch",
+        "$(CTANGLE) $^ $@" },
+    { "%.tex", "%.w %.ch",
+        "$(CWEAVE) $^ $@" },
+
+    { 0, 0, 0 }
+  };
+
+static struct pspec default_terminal_rules[] =
+  {
+#ifdef VMS
+
+    /* RCS.  */
+    { "%", "%$$5lv", /* Multinet style */
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "[.$$rcs]%$$5lv", /* Multinet style */
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "%_v", /* Normal style */
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "[.rcs]%_v", /* Normal style */
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
+
+    /* SCCS.  */
+        /* ain't no SCCS on vms */
+
+#else
+    /* RCS.  */
+    { "%", "%,v",
+        "$(CHECKOUT,v)" },
+    { "%", "RCS/%,v",
+        "$(CHECKOUT,v)" },
+    { "%", "RCS/%",
+        "$(CHECKOUT,v)" },
+
+    /* SCCS.  */
+    { "%", "s.%",
+        "$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
+    { "%", "SCCS/s.%",
+        "$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
+#endif /* !VMS */
+    { 0, 0, 0 }
+  };
+
+static const char *default_suffix_rules[] =
+  {
+#ifdef VMS
+    ".obj.exe",
+    "$(LINK.obj) $^ $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
+    ".mar.exe",
+    "$(COMPILE.mar) $^ \n $(LINK.obj) $(subst .mar,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
+    ".s.exe",
+    "$(COMPILE.s) $^ \n $(LINK.obj) $(subst .s,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
+    ".c.exe",
+    "$(COMPILE.c) $^ \n $(LINK.obj) $(subst .c,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
+    ".cc.exe",
+#ifdef GCC_IS_NATIVE
+    "$(COMPILE.cc) $^ \n $(LINK.obj) $(CXXSTARTUP),sys$$disk:[]$(subst .cc,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
+#else
+    "$(COMPILE.cc) $^ \n $(CXXLINK.obj) $(subst .cc,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
+    ".cxx.exe",
+    "$(COMPILE.cxx) $^ \n $(CXXLINK.obj) $(subst .cxx,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
+#endif
+    ".for.exe",
+    "$(COMPILE.for) $^ \n $(LINK.obj) $(subst .for,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".pas.exe",
+    "$(COMPILE.pas) $^ \n $(LINK.obj) $(subst .pas,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+
+    ".com",
+    "copy $< >$@",
+
+    ".mar.obj",
+    "$(COMPILE.mar) /obj=$@ $<",
+    ".s.obj",
+    "$(COMPILE.s) /obj=$@ $<",
+    ".ss.obj",
+    "$(COMPILE.s) /obj=$@ $<",
+    ".c.i",
+    "$(COMPILE.c)/prep /list=$@ $<",
+    ".c.s",
+    "$(COMPILE.c)/noobj/machine /list=$@ $<",
+    ".i.s",
+    "$(COMPILE.c)/noprep/noobj/machine /list=$@ $<",
+    ".c.obj",
+    "$(COMPILE.c) /obj=$@ $<",
+    ".c.o",
+    "$(COMPILE.c) /obj=$@ $<",
+    ".cc.ii",
+    "$(COMPILE.cc)/prep /list=$@ $<",
+    ".cc.ss",
+    "$(COMPILE.cc)/noobj/machine /list=$@ $<",
+    ".ii.ss",
+    "$(COMPILE.cc)/noprep/noobj/machine /list=$@ $<",
+    ".cc.obj",
+    "$(COMPILE.cc) /obj=$@ $<",
+    ".cc.o",
+    "$(COMPILE.cc) /obj=$@ $<",
+    ".cxx.obj",
+    "$(COMPILE.cxx) /obj=$@ $<",
+    ".cxx.o",
+    "$(COMPILE.cxx) /obj=$@ $<",
+    ".for.obj",
+    "$(COMPILE.for) /obj=$@ $<",
+    ".for.o",
+    "$(COMPILE.for) /obj=$@ $<",
+    ".pas.obj",
+    "$(COMPILE.pas) /obj=$@ $<",
+    ".pas.o",
+    "$(COMPILE.pas) /obj=$@ $<",
+
+    ".y.c",
+    "$(YACC.y) $< \n rename y_tab.c $@",
+    ".l.c",
+    "$(LEX.l) $< \n rename lexyy.c $@",
+
+    ".texinfo.info",
+    "$(MAKEINFO) $<",
+
+    ".tex.dvi",
+    "$(TEX) $<",
+
+#else /* ! VMS */
+
+    ".o",
+    "$(LINK.o) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".s",
+    "$(LINK.s) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".S",
+    "$(LINK.S) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".c",
+    "$(LINK.c) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".cc",
+    "$(LINK.cc) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".C",
+    "$(LINK.C) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".cpp",
+    "$(LINK.cpp) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".f",
+    "$(LINK.f) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".m",
+    "$(LINK.m) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".p",
+    "$(LINK.p) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".F",
+    "$(LINK.F) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".r",
+    "$(LINK.r) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".mod",
+    "$(COMPILE.mod) -o $@ -e $@ $^",
+
+    ".def.sym",
+    "$(COMPILE.def) -o $@ $<",
+
+    ".sh",
+    "cat $< >$@ \n chmod a+x $@",
+
+    ".s.o",
+    "$(COMPILE.s) -o $@ $<",
+    ".S.o",
+    "$(COMPILE.S) -o $@ $<",
+    ".c.o",
+    "$(COMPILE.c) $(OUTPUT_OPTION) $<",
+    ".cc.o",
+    "$(COMPILE.cc) $(OUTPUT_OPTION) $<",
+    ".C.o",
+    "$(COMPILE.C) $(OUTPUT_OPTION) $<",
+    ".cpp.o",
+    "$(COMPILE.cpp) $(OUTPUT_OPTION) $<",
+    ".f.o",
+    "$(COMPILE.f) $(OUTPUT_OPTION) $<",
+    ".m.o",
+    "$(COMPILE.m) $(OUTPUT_OPTION) $<",
+    ".p.o",
+    "$(COMPILE.p) $(OUTPUT_OPTION) $<",
+    ".F.o",
+    "$(COMPILE.F) $(OUTPUT_OPTION) $<",
+    ".r.o",
+    "$(COMPILE.r) $(OUTPUT_OPTION) $<",
+    ".mod.o",
+    "$(COMPILE.mod) -o $@ $<",
+
+    ".c.ln",
+    "$(LINT.c) -C$* $<",
+    ".y.ln",
+#ifndef __MSDOS__
+    "$(YACC.y) $< \n $(LINT.c) -C$* y.tab.c \n $(RM) y.tab.c",
+#else
+    "$(YACC.y) $< \n $(LINT.c) -C$* y_tab.c \n $(RM) y_tab.c",
+#endif
+    ".l.ln",
+    "@$(RM) $*.c\n $(LEX.l) $< > $*.c\n$(LINT.c) -i $*.c -o $@\n $(RM) $*.c",
+
+    ".y.c",
+#ifndef __MSDOS__
+    "$(YACC.y) $< \n mv -f y.tab.c $@",
+#else
+    "$(YACC.y) $< \n mv -f y_tab.c $@",
+#endif
+    ".l.c",
+    "@$(RM) $@ \n $(LEX.l) $< > $@",
+    ".ym.m",
+    "$(YACC.m) $< \n mv -f y.tab.c $@",
+    ".lm.m",
+    "@$(RM) $@ \n $(LEX.m) $< > $@",
+
+    ".F.f",
+    "$(PREPROCESS.F) $(OUTPUT_OPTION) $<",
+    ".r.f",
+    "$(PREPROCESS.r) $(OUTPUT_OPTION) $<",
+
+    /* This might actually make lex.yy.c if there's no %R% directive in $*.l,
+       but in that case why were you trying to make $*.r anyway?  */
+    ".l.r",
+    "$(LEX.l) $< > $@ \n mv -f lex.yy.r $@",
+
+    ".S.s",
+    "$(PREPROCESS.S) $< > $@",
+
+    ".texinfo.info",
+    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
+
+    ".texi.info",
+    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
+
+    ".txinfo.info",
+    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
+
+    ".tex.dvi",
+    "$(TEX) $<",
+
+    ".texinfo.dvi",
+    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
+
+    ".texi.dvi",
+    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
+
+    ".txinfo.dvi",
+    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
+
+    ".w.c",
+    "$(CTANGLE) $< - $@",       /* The '-' says there is no '.ch' file.  */
+
+    ".web.p",
+    "$(TANGLE) $<",
+
+    ".w.tex",
+    "$(CWEAVE) $< - $@",        /* The '-' says there is no '.ch' file.  */
+
+    ".web.tex",
+    "$(WEAVE) $<",
+
+#endif /* !VMS */
+
+    0, 0,
+  };
+
+static const char *default_variables[] =
+  {
+#ifdef VMS
+#ifdef __ALPHA
+    "ARCH", "ALPHA",
+#endif
+#ifdef __ia64
+    "ARCH", "IA64",
+#endif
+#ifdef __VAX
+    "ARCH", "VAX",
+#endif
+    "AR", "library",
+    "LIBRARY", "library",
+    "ARFLAGS", "/replace",
+    "AS", "macro",
+    "MACRO", "macro",
+#ifdef GCC_IS_NATIVE
+    "CC", "gcc",
+#else
+    "CC", "cc",
+#endif
+    "CD", "builtin_cd",
+    "ECHO", "builtin_echo",
+#ifdef GCC_IS_NATIVE
+    "C++", "gcc/plus",
+    "CXX", "gcc/plus",
+#else
+    "C++", "cxx",
+    "CXX", "cxx",
+#ifndef __ia64
+    "CXXLD", "cxxlink",
+    "CXXLINK", "cxxlink",
+#else
+    /* CXXLINK is not used on VMS/IA64 */
+    "CXXLD", "link",
+    "CXXLINK", "link",
+#endif
+#endif
+    "CO", "co",
+    "CPP", "$(CC) /preprocess_only",
+    "FC", "fortran",
+    /* System V uses these, so explicit rules using them should work.
+       However, there is no way to make implicit rules use them and FC.  */
+    "F77", "$(FC)",
+    "F77FLAGS", "$(FFLAGS)",
+    "LD", "link",
+    "LEX", "lex",
+    "PC", "pascal",
+    "YACC", "bison/yacc",
+    "YFLAGS", "/Define/Verbose",
+    "BISON", "bison",
+    "MAKEINFO", "makeinfo",
+    "TEX", "tex",
+    "TEXINDEX", "texindex",
+
+    "RM", "delete/nolog",
+
+    "CSTARTUP", "",
+#ifdef GCC_IS_NATIVE
+    "CRT0", ",sys$$library:vaxcrtl.olb/lib,gnu_cc_library:crt0.obj",
+    "CXXSTARTUP", "gnu_cc_library:crtbegin.obj",
+    "CXXRT0", ",sys$$library:vaxcrtl.olb/lib,gnu_cc_library:crtend.obj,gnu_cc_library:gxx_main.obj",
+    "LXLIBS", ",gnu_cc_library:libstdcxx.olb/lib,gnu_cc_library:libgccplus.olb/lib",
+    "LDLIBS", ",gnu_cc_library:libgcc.olb/lib",
+#else
+    "CRT0", "",
+    "CXXSTARTUP", "",
+    "CXXRT0", "",
+    "LXLIBS", "",
+    "LDLIBS", "",
+#endif
+
+    "LINK.obj", "$(LD) $(LDFLAGS)",
+#ifndef GCC_IS_NATIVE
+    "CXXLINK.obj", "$(CXXLD) $(LDFLAGS)",
+    "COMPILE.cxx", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+#endif
+    "COMPILE.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+    "COMPILE.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+    "YACC.y", "$(YACC) $(YFLAGS)",
+    "LEX.l", "$(LEX) $(LFLAGS)",
+    "COMPILE.for", "$(FC) $(FFLAGS) $(TARGET_ARCH)",
+    "COMPILE.pas", "$(PC) $(PFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+    "COMPILE.mar", "$(MACRO) $(MACROFLAGS)",
+    "COMPILE.s", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
+    "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+
+    "MV", "rename/new_version",
+    "CP", "copy",
+    ".LIBPATTERNS", "%.olb lib%.a",
+
+#else /* !VMS */
+
+    "AR", "ar",
+    "ARFLAGS", "rv",
+    "AS", "as",
+#ifdef GCC_IS_NATIVE
+    "CC", "gcc",
+# ifdef __MSDOS__
+    "CXX", "gpp",       /* g++ is an invalid name on MSDOS */
+# else
+    "CXX", "gcc",
+# endif /* __MSDOS__ */
+    "OBJC", "gcc",
+#else
+    "CC", "cc",
+    "CXX", "g++",
+    "OBJC", "cc",
+#endif
+
+    /* This expands to $(CO) $(COFLAGS) $< $@ if $@ does not exist,
+       and to the empty string if $@ does exist.  */
+    "CHECKOUT,v", "+$(if $(wildcard $@),,$(CO) $(COFLAGS) $< $@)",
+    "CO", "co",
+    "COFLAGS", "",
+
+    "CPP", "$(CC) -E",
+#ifdef  CRAY
+    "CF77PPFLAGS", "-P",
+    "CF77PP", "/lib/cpp",
+    "CFT", "cft77",
+    "CF", "cf77",
+    "FC", "$(CF)",
+#else   /* Not CRAY.  */
+#ifdef  _IBMR2
+    "FC", "xlf",
+#else
+#ifdef  __convex__
+    "FC", "fc",
+#else
+    "FC", "f77",
+#endif /* __convex__ */
+#endif /* _IBMR2 */
+    /* System V uses these, so explicit rules using them should work.
+       However, there is no way to make implicit rules use them and FC.  */
+    "F77", "$(FC)",
+    "F77FLAGS", "$(FFLAGS)",
+#endif  /* Cray.  */
+    "GET", SCCS_GET,
+    "LD", "ld",
+#ifdef GCC_IS_NATIVE
+    "LEX", "flex",
+#else
+    "LEX", "lex",
+#endif
+    "LINT", "lint",
+    "M2C", "m2c",
+#ifdef  pyr
+    "PC", "pascal",
+#else
+#ifdef  CRAY
+    "PC", "PASCAL",
+    "SEGLDR", "segldr",
+#else
+    "PC", "pc",
+#endif  /* CRAY.  */
+#endif  /* pyr.  */
+#ifdef GCC_IS_NATIVE
+    "YACC", "bison -y",
+#else
+    "YACC", "yacc",     /* Or "bison -y"  */
+#endif
+    "MAKEINFO", "makeinfo",
+    "TEX", "tex",
+    "TEXI2DVI", "texi2dvi",
+    "WEAVE", "weave",
+    "CWEAVE", "cweave",
+    "TANGLE", "tangle",
+    "CTANGLE", "ctangle",
+
+    "RM", "rm -f",
+
+    "LINK.o", "$(CC) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "LINK.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.m", "$(OBJC) $(OBJCFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "LINK.m", "$(OBJC) $(OBJCFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "COMPILE.C", "$(COMPILE.cc)",
+    "COMPILE.cpp", "$(COMPILE.cc)",
+    "LINK.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "LINK.C", "$(LINK.cc)",
+    "LINK.cpp", "$(LINK.cc)",
+    "YACC.y", "$(YACC) $(YFLAGS)",
+    "LEX.l", "$(LEX) $(LFLAGS) -t",
+    "YACC.m", "$(YACC) $(YFLAGS)",
+    "LEX.m", "$(LEX) $(LFLAGS) -t",
+    "COMPILE.f", "$(FC) $(FFLAGS) $(TARGET_ARCH) -c",
+    "LINK.f", "$(FC) $(FFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "LINK.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.r", "$(FC) $(FFLAGS) $(RFLAGS) $(TARGET_ARCH) -c",
+    "LINK.r", "$(FC) $(FFLAGS) $(RFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "COMPILE.def", "$(M2C) $(M2FLAGS) $(DEFFLAGS) $(TARGET_ARCH)",
+    "COMPILE.mod", "$(M2C) $(M2FLAGS) $(MODFLAGS) $(TARGET_ARCH)",
+    "COMPILE.p", "$(PC) $(PFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "LINK.p", "$(PC) $(PFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
+    "LINK.s", "$(CC) $(ASFLAGS) $(LDFLAGS) $(TARGET_MACH)",
+    "COMPILE.s", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
+    "LINK.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_MACH)",
+    "COMPILE.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(TARGET_MACH) -c",
+    "PREPROCESS.S", "$(CC) -E $(CPPFLAGS)",
+    "PREPROCESS.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -F",
+    "PREPROCESS.r", "$(FC) $(FFLAGS) $(RFLAGS) $(TARGET_ARCH) -F",
+    "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+
+#ifndef NO_MINUS_C_MINUS_O
+    "OUTPUT_OPTION", "-o $@",
+#endif
+
+#ifdef  SCCS_GET_MINUS_G
+    "SCCS_OUTPUT_OPTION", "-G$@",
+#endif
+
+#if defined(_AMIGA)
+    ".LIBPATTERNS", "%.lib",
+#elif defined(__MSDOS__)
+    ".LIBPATTERNS", "lib%.a $(DJDIR)/lib/lib%.a",
+#elif defined(__APPLE__)
+    ".LIBPATTERNS", "lib%.dylib lib%.a",
+#elif defined(__CYGWIN__) || defined(WINDOWS32)
+    ".LIBPATTERNS", "lib%.dll.a %.dll.a lib%.a %.lib lib%.dll %.dll",
+#else
+    ".LIBPATTERNS", "lib%.so lib%.a",
+#endif
+
+#endif /* !VMS */
+    /* Make this assignment to avoid undefined variable warnings.  */
+    "GNUMAKEFLAGS", "",
+    0, 0
+  };
+
+/* Set up the default .SUFFIXES list.  */
+
+void
+set_default_suffixes (void)
+{
+  suffix_file = enter_file (strcache_add (".SUFFIXES"));
+  suffix_file->builtin = 1;
+
+  if (no_builtin_rules_flag)
+    define_variable_cname ("SUFFIXES", "", o_default, 0);
+  else
+    {
+      struct dep *d;
+      const char *p = default_suffixes;
+      suffix_file->deps = enter_prereqs (PARSE_SIMPLE_SEQ ((char **)&p, struct dep),
+                                         NULL);
+      for (d = suffix_file->deps; d; d = d->next)
+        d->file->builtin = 1;
+
+      define_variable_cname ("SUFFIXES", default_suffixes, o_default, 0);
+    }
+}
+
+/* Enter the default suffix rules as file rules.  This used to be done in
+   install_default_implicit_rules, but that loses because we want the
+   suffix rules installed before reading makefiles, and the pattern rules
+   installed after.  */
+
+void
+install_default_suffix_rules (void)
+{
+  const char **s;
+
+  if (no_builtin_rules_flag)
+    return;
+
+  for (s = default_suffix_rules; *s != 0; s += 2)
+    {
+      struct file *f = enter_file (strcache_add (s[0]));
+      /* This function should run before any makefile is parsed.  */
+      assert (f->cmds == 0);
+      f->cmds = xmalloc (sizeof (struct commands));
+      f->cmds->fileinfo.filenm = 0;
+      f->cmds->commands = xstrdup (s[1]);
+      f->cmds->command_lines = 0;
+      f->cmds->recipe_prefix = RECIPEPREFIX_DEFAULT;
+      f->builtin = 1;
+    }
+}
+
+
+/* Install the default pattern rules.  */
+
+void
+install_default_implicit_rules (void)
+{
+  struct pspec *p;
+
+  if (no_builtin_rules_flag)
+    return;
+
+  for (p = default_pattern_rules; p->target != 0; ++p)
+    install_pattern_rule (p, 0);
+
+  for (p = default_terminal_rules; p->target != 0; ++p)
+    install_pattern_rule (p, 1);
+}
+
+void
+define_default_variables (void)
+{
+  const char **s;
+
+  if (no_builtin_variables_flag)
+    return;
+
+  for (s = default_variables; *s != 0; s += 2)
+    define_variable (s[0], strlen (s[0]), s[1], o_default, 1);
+}
+
+void
+undefine_default_variables (void)
+{
+  const char **s;
+
+  for (s = default_variables; *s != 0; s += 2)
+    undefine_variable_global (s[0], strlen (s[0]), o_default);
+}
diff --git a/dep.h b/dep.h
new file mode 100644
index 0000000..b8c0d29
--- /dev/null
+++ b/dep.h
@@ -0,0 +1,92 @@
+/* Definitions of dependency data structures for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Flag bits for the second argument to 'read_makefile'.
+   These flags are saved in the 'changed' field of each
+   'struct dep' in the chain returned by 'read_all_makefiles'.  */
+
+#define RM_NO_DEFAULT_GOAL      (1 << 0) /* Do not set default goal.  */
+#define RM_INCLUDED             (1 << 1) /* Search makefile search path.  */
+#define RM_DONTCARE             (1 << 2) /* No error if it doesn't exist.  */
+#define RM_NO_TILDE             (1 << 3) /* Don't expand ~ in file name.  */
+#define RM_NOFLAG               0
+
+/* Structure representing one dependency of a file.
+   Each struct file's 'deps' points to a chain of these,
+   chained through the 'next'. 'stem' is the stem for this
+   dep line of static pattern rule or NULL.
+
+   Note that the first two words of this match a struct nameseq.  */
+
+struct dep
+  {
+    struct dep *next;
+    const char *name;
+    const char *stem;
+    struct file *file;
+    unsigned int changed : 8;
+    unsigned int ignore_mtime : 1;
+    unsigned int staticpattern : 1;
+    unsigned int need_2nd_expansion : 1;
+    unsigned int dontcare : 1;
+  };
+
+
+/* Structure used in chains of names, for parsing and globbing.  */
+
+struct nameseq
+  {
+    struct nameseq *next;
+    const char *name;
+  };
+
+#define PARSEFS_NONE    0x0000
+#define PARSEFS_NOSTRIP 0x0001
+#define PARSEFS_NOAR    0x0002
+#define PARSEFS_NOGLOB  0x0004
+#define PARSEFS_EXISTS  0x0008
+#define PARSEFS_NOCACHE 0x0010
+
+#define PARSE_FILE_SEQ(_s,_t,_c,_p,_f) \
+            (_t *)parse_file_seq ((_s),sizeof (_t),(_c),(_p),(_f))
+#define PARSE_SIMPLE_SEQ(_s,_t) \
+            (_t *)parse_file_seq ((_s),sizeof (_t),MAP_NUL,NULL,PARSEFS_NONE)
+
+#ifdef VMS
+void *parse_file_seq ();
+#else
+void *parse_file_seq (char **stringp, unsigned int size,
+                      int stopmap, const char *prefix, int flags);
+#endif
+
+char *tilde_expand (const char *name);
+
+#ifndef NO_ARCHIVES
+struct nameseq *ar_glob (const char *arname, const char *member_pattern, unsigned int size);
+#endif
+
+#define dep_name(d)     ((d)->name == 0 ? (d)->file->name : (d)->name)
+
+#define alloc_dep()     (xcalloc (sizeof (struct dep)))
+#define free_ns(_n)     free (_n)
+#define free_dep(_d)    free_ns (_d)
+
+struct dep *copy_dep_chain (const struct dep *d);
+void free_dep_chain (struct dep *d);
+void free_ns_chain (struct nameseq *n);
+struct dep *read_all_makefiles (const char **makefiles);
+void eval_buffer (char *buffer, const gmk_floc *floc);
+enum update_status update_goal_chain (struct dep *goals);
diff --git a/dir.c b/dir.c
new file mode 100644
index 0000000..7e00b8f
--- /dev/null
+++ b/dir.c
@@ -0,0 +1,1234 @@
+/* Directory hashing for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "hash.h"
+#include "filedef.h"
+#include "dep.h"
+
+#ifdef  HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+# ifdef VMS
+/* its prototype is in vmsdir.h, which is not needed for HAVE_DIRENT_H */
+const char *vmsify (const char *name, int type);
+# endif
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+# ifdef HAVE_VMSDIR_H
+#  include "vmsdir.h"
+# endif /* HAVE_VMSDIR_H */
+#endif
+
+/* In GNU systems, <dirent.h> defines this macro for us.  */
+#ifdef _D_NAMLEN
+# undef NAMLEN
+# define NAMLEN(d) _D_NAMLEN(d)
+#endif
+
+#if (defined (POSIX) || defined (VMS) || defined (WINDOWS32)) && !defined (__GNU_LIBRARY__)
+/* Posix does not require that the d_ino field be present, and some
+   systems do not provide it. */
+# define REAL_DIR_ENTRY(dp) 1
+# define FAKE_DIR_ENTRY(dp)
+#else
+# define REAL_DIR_ENTRY(dp) (dp->d_ino != 0)
+# define FAKE_DIR_ENTRY(dp) (dp->d_ino = 1)
+#endif /* POSIX */
+
+#ifdef __MSDOS__
+#include <ctype.h>
+#include <fcntl.h>
+
+/* If it's MSDOS that doesn't have _USE_LFN, disable LFN support.  */
+#ifndef _USE_LFN
+#define _USE_LFN 0
+#endif
+
+static const char *
+dosify (const char *filename)
+{
+  static char dos_filename[14];
+  char *df;
+  int i;
+
+  if (filename == 0 || _USE_LFN)
+    return filename;
+
+  /* FIXME: what about filenames which violate
+     8+3 constraints, like "config.h.in", or ".emacs"?  */
+  if (strpbrk (filename, "\"*+,;<=>?[\\]|") != 0)
+    return filename;
+
+  df = dos_filename;
+
+  /* First, transform the name part.  */
+  for (i = 0; i < 8 && ! STOP_SET (*filename, MAP_DOT|MAP_NUL); ++i)
+    *df++ = tolower ((unsigned char)*filename++);
+
+  /* Now skip to the next dot.  */
+  while (! STOP_SET (*filename, MAP_DOT|MAP_NUL))
+    ++filename;
+  if (*filename != '\0')
+    {
+      *df++ = *filename++;
+      for (i = 0; i < 3 && ! STOP_SET (*filename, MAP_DOT|MAP_NUL); ++i)
+        *df++ = tolower ((unsigned char)*filename++);
+    }
+
+  /* Look for more dots.  */
+  while (! STOP_SET (*filename, MAP_DOT|MAP_NUL))
+    ++filename;
+  if (*filename == '.')
+    return filename;
+  *df = 0;
+  return dos_filename;
+}
+#endif /* __MSDOS__ */
+
+#ifdef WINDOWS32
+#include "pathstuff.h"
+#endif
+
+#ifdef _AMIGA
+#include <ctype.h>
+#endif
+
+#ifdef HAVE_CASE_INSENSITIVE_FS
+static const char *
+downcase (const char *filename)
+{
+  static PATH_VAR (new_filename);
+  char *df;
+
+  if (filename == 0)
+    return 0;
+
+  df = new_filename;
+  while (*filename != '\0')
+    {
+      *df++ = tolower ((unsigned char)*filename);
+      ++filename;
+    }
+
+  *df = 0;
+
+  return new_filename;
+}
+#endif /* HAVE_CASE_INSENSITIVE_FS */
+
+#ifdef VMS
+
+static int
+vms_hash (const char *name)
+{
+  int h = 0;
+
+  while (*name)
+    {
+      unsigned char uc = *name;
+      int g;
+#ifdef HAVE_CASE_INSENSITIVE_FS
+      h = (h << 4) + (isupper (uc) ? tolower (uc) : uc);
+#else
+      h = (h << 4) + uc;
+#endif
+      name++;
+      g = h & 0xf0000000;
+      if (g)
+        {
+          h = h ^ (g >> 24);
+          h = h ^ g;
+        }
+    }
+  return h;
+}
+
+/* fake stat entry for a directory */
+static int
+vmsstat_dir (const char *name, struct stat *st)
+{
+  char *s;
+  int h;
+  DIR *dir;
+
+  dir = opendir (name);
+  if (dir == 0)
+    return -1;
+  closedir (dir);
+  s = strchr (name, ':');       /* find device */
+  if (s)
+    {
+      /* to keep the compiler happy we said "const char *name", now we cheat */
+      *s++ = 0;
+      st->st_dev = (char *)vms_hash (name);
+      h = vms_hash (s);
+      *(s-1) = ':';
+    }
+  else
+    {
+      st->st_dev = 0;
+      h = vms_hash (name);
+    }
+
+  st->st_ino[0] = h & 0xff;
+  st->st_ino[1] = h & 0xff00;
+  st->st_ino[2] = h >> 16;
+
+  return 0;
+}
+#endif /* VMS */
+
+/* Hash table of directories.  */
+
+#ifndef DIRECTORY_BUCKETS
+#define DIRECTORY_BUCKETS 199
+#endif
+
+struct directory_contents
+  {
+    dev_t dev;                  /* Device and inode numbers of this dir.  */
+#ifdef WINDOWS32
+    /* Inode means nothing on WINDOWS32. Even file key information is
+     * unreliable because it is random per file open and undefined for remote
+     * filesystems. The most unique attribute I can come up with is the fully
+     * qualified name of the directory. Beware though, this is also
+     * unreliable. I'm open to suggestion on a better way to emulate inode.  */
+    char *path_key;
+    int   ctime;
+    int   mtime;        /* controls check for stale directory cache */
+    int   fs_flags;     /* FS_FAT, FS_NTFS, ... */
+# define FS_FAT      0x1
+# define FS_NTFS     0x2
+# define FS_UNKNOWN  0x4
+#else
+# ifdef VMS
+    ino_t ino[3];
+# else
+    ino_t ino;
+# endif
+#endif /* WINDOWS32 */
+    struct hash_table dirfiles; /* Files in this directory.  */
+    DIR *dirstream;             /* Stream reading this directory.  */
+  };
+
+static unsigned long
+directory_contents_hash_1 (const void *key_0)
+{
+  const struct directory_contents *key = key_0;
+  unsigned long hash;
+
+#ifdef WINDOWS32
+  hash = 0;
+  ISTRING_HASH_1 (key->path_key, hash);
+  hash ^= ((unsigned int) key->dev << 4) ^ (unsigned int) key->ctime;
+#else
+# ifdef VMS
+  hash = (((unsigned int) key->dev << 4)
+          ^ ((unsigned int) key->ino[0]
+             + (unsigned int) key->ino[1]
+             + (unsigned int) key->ino[2]));
+# else
+  hash = ((unsigned int) key->dev << 4) ^ (unsigned int) key->ino;
+# endif
+#endif /* WINDOWS32 */
+  return hash;
+}
+
+static unsigned long
+directory_contents_hash_2 (const void *key_0)
+{
+  const struct directory_contents *key = key_0;
+  unsigned long hash;
+
+#ifdef WINDOWS32
+  hash = 0;
+  ISTRING_HASH_2 (key->path_key, hash);
+  hash ^= ((unsigned int) key->dev << 4) ^ (unsigned int) ~key->ctime;
+#else
+# ifdef VMS
+  hash = (((unsigned int) key->dev << 4)
+          ^ ~((unsigned int) key->ino[0]
+              + (unsigned int) key->ino[1]
+              + (unsigned int) key->ino[2]));
+# else
+  hash = ((unsigned int) key->dev << 4) ^ (unsigned int) ~key->ino;
+# endif
+#endif /* WINDOWS32 */
+
+  return hash;
+}
+
+/* Sometimes it's OK to use subtraction to get this value:
+     result = X - Y;
+   But, if we're not sure of the type of X and Y they may be too large for an
+   int (on a 64-bit system for example).  So, use ?: instead.
+   See Savannah bug #15534.
+
+   NOTE!  This macro has side-effects!
+*/
+
+#define MAKECMP(_x,_y)  ((_x)<(_y)?-1:((_x)==(_y)?0:1))
+
+static int
+directory_contents_hash_cmp (const void *xv, const void *yv)
+{
+  const struct directory_contents *x = xv;
+  const struct directory_contents *y = yv;
+  int result;
+
+#ifdef WINDOWS32
+  ISTRING_COMPARE (x->path_key, y->path_key, result);
+  if (result)
+    return result;
+  result = MAKECMP(x->ctime, y->ctime);
+  if (result)
+    return result;
+#else
+# ifdef VMS
+  result = MAKECMP(x->ino[0], y->ino[0]);
+  if (result)
+    return result;
+  result = MAKECMP(x->ino[1], y->ino[1]);
+  if (result)
+    return result;
+  result = MAKECMP(x->ino[2], y->ino[2]);
+  if (result)
+    return result;
+# else
+  result = MAKECMP(x->ino, y->ino);
+  if (result)
+    return result;
+# endif
+#endif /* WINDOWS32 */
+
+  return MAKECMP(x->dev, y->dev);
+}
+
+/* Table of directory contents hashed by device and inode number.  */
+static struct hash_table directory_contents;
+
+struct directory
+  {
+    const char *name;                   /* Name of the directory.  */
+
+    /* The directory's contents.  This data may be shared by several
+       entries in the hash table, which refer to the same directory
+       (identified uniquely by 'dev' and 'ino') under different names.  */
+    struct directory_contents *contents;
+  };
+
+static unsigned long
+directory_hash_1 (const void *key)
+{
+  return_ISTRING_HASH_1 (((const struct directory *) key)->name);
+}
+
+static unsigned long
+directory_hash_2 (const void *key)
+{
+  return_ISTRING_HASH_2 (((const struct directory *) key)->name);
+}
+
+static int
+directory_hash_cmp (const void *x, const void *y)
+{
+  return_ISTRING_COMPARE (((const struct directory *) x)->name,
+                          ((const struct directory *) y)->name);
+}
+
+/* Table of directories hashed by name.  */
+static struct hash_table directories;
+
+/* Never have more than this many directories open at once.  */
+
+#define MAX_OPEN_DIRECTORIES 10
+
+static unsigned int open_directories = 0;
+
+
+/* Hash table of files in each directory.  */
+
+struct dirfile
+  {
+    const char *name;           /* Name of the file.  */
+    short length;
+    short impossible;           /* This file is impossible.  */
+  };
+
+static unsigned long
+dirfile_hash_1 (const void *key)
+{
+  return_ISTRING_HASH_1 (((struct dirfile const *) key)->name);
+}
+
+static unsigned long
+dirfile_hash_2 (const void *key)
+{
+  return_ISTRING_HASH_2 (((struct dirfile const *) key)->name);
+}
+
+static int
+dirfile_hash_cmp (const void *xv, const void *yv)
+{
+  const struct dirfile *x = xv;
+  const struct dirfile *y = yv;
+  int result = x->length - y->length;
+  if (result)
+    return result;
+  return_ISTRING_COMPARE (x->name, y->name);
+}
+
+#ifndef DIRFILE_BUCKETS
+#define DIRFILE_BUCKETS 107
+#endif
+
+static int dir_contents_file_exists_p (struct directory_contents *dir,
+                                       const char *filename);
+static struct directory *find_directory (const char *name);
+
+/* Find the directory named NAME and return its 'struct directory'.  */
+
+static struct directory *
+find_directory (const char *name)
+{
+  struct directory *dir;
+  struct directory **dir_slot;
+  struct directory dir_key;
+
+#ifdef VMS
+  if ((*name == '.') && (*(name+1) == 0))
+    name = "[]";
+  else
+    name = vmsify (name,1);
+#endif
+
+  dir_key.name = name;
+  dir_slot = (struct directory **) hash_find_slot (&directories, &dir_key);
+  dir = *dir_slot;
+
+  if (HASH_VACANT (dir))
+    {
+      /* The directory was not found.  Create a new entry for it.  */
+      const char *p = name + strlen (name);
+      struct stat st;
+      int r;
+
+      dir = xmalloc (sizeof (struct directory));
+#if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
+      dir->name = strcache_add_len (downcase (name), p - name);
+#else
+      dir->name = strcache_add_len (name, p - name);
+#endif
+      hash_insert_at (&directories, dir, dir_slot);
+      /* The directory is not in the name hash table.
+         Find its device and inode numbers, and look it up by them.  */
+
+#ifdef VMS
+      r = vmsstat_dir (name, &st);
+#elif defined(WINDOWS32)
+      {
+        char tem[MAXPATHLEN], *tstart, *tend;
+
+        /* Remove any trailing slashes.  Windows32 stat fails even on
+           valid directories if they end in a slash. */
+        memcpy (tem, name, p - name + 1);
+        tstart = tem;
+        if (tstart[1] == ':')
+          tstart += 2;
+        for (tend = tem + (p - name - 1);
+             tend > tstart && (*tend == '/' || *tend == '\\');
+             tend--)
+          *tend = '\0';
+
+        r = stat (tem, &st);
+      }
+#else
+      EINTRLOOP (r, stat (name, &st));
+#endif
+
+      if (r < 0)
+        {
+        /* Couldn't stat the directory.  Mark this by
+           setting the 'contents' member to a nil pointer.  */
+          dir->contents = 0;
+        }
+      else
+        {
+          /* Search the contents hash table; device and inode are the key.  */
+
+#ifdef WINDOWS32
+          char *w32_path;
+#endif
+          struct directory_contents *dc;
+          struct directory_contents **dc_slot;
+          struct directory_contents dc_key;
+
+          dc_key.dev = st.st_dev;
+#ifdef WINDOWS32
+          dc_key.path_key = w32_path = w32ify (name, 1);
+          dc_key.ctime = st.st_ctime;
+#else
+# ifdef VMS
+          dc_key.ino[0] = st.st_ino[0];
+          dc_key.ino[1] = st.st_ino[1];
+          dc_key.ino[2] = st.st_ino[2];
+# else
+          dc_key.ino = st.st_ino;
+# endif
+#endif
+          dc_slot = (struct directory_contents **) hash_find_slot (&directory_contents, &dc_key);
+          dc = *dc_slot;
+
+          if (HASH_VACANT (dc))
+            {
+              /* Nope; this really is a directory we haven't seen before.  */
+#ifdef WINDOWS32
+              char  fs_label[BUFSIZ];
+              char  fs_type[BUFSIZ];
+              unsigned long  fs_serno;
+              unsigned long  fs_flags;
+              unsigned long  fs_len;
+#endif
+              dc = (struct directory_contents *)
+                xmalloc (sizeof (struct directory_contents));
+
+              /* Enter it in the contents hash table.  */
+              dc->dev = st.st_dev;
+#ifdef WINDOWS32
+              dc->path_key = xstrdup (w32_path);
+              dc->ctime = st.st_ctime;
+              dc->mtime = st.st_mtime;
+
+              /* NTFS is the only WINDOWS32 filesystem that bumps mtime on a
+                 directory when files are added/deleted from a directory.  */
+              w32_path[3] = '\0';
+              if (GetVolumeInformation (w32_path, fs_label, sizeof (fs_label),
+                                        &fs_serno, &fs_len, &fs_flags, fs_type,
+                                        sizeof (fs_type)) == FALSE)
+                dc->fs_flags = FS_UNKNOWN;
+              else if (!strcmp (fs_type, "FAT"))
+                dc->fs_flags = FS_FAT;
+              else if (!strcmp (fs_type, "NTFS"))
+                dc->fs_flags = FS_NTFS;
+              else
+                dc->fs_flags = FS_UNKNOWN;
+#else
+# ifdef VMS
+              dc->ino[0] = st.st_ino[0];
+              dc->ino[1] = st.st_ino[1];
+              dc->ino[2] = st.st_ino[2];
+# else
+              dc->ino = st.st_ino;
+# endif
+#endif /* WINDOWS32 */
+              hash_insert_at (&directory_contents, dc, dc_slot);
+              ENULLLOOP (dc->dirstream, opendir (name));
+              if (dc->dirstream == 0)
+                /* Couldn't open the directory.  Mark this by setting the
+                   'files' member to a nil pointer.  */
+                dc->dirfiles.ht_vec = 0;
+              else
+                {
+                  hash_init (&dc->dirfiles, DIRFILE_BUCKETS,
+                             dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
+                  /* Keep track of how many directories are open.  */
+                  ++open_directories;
+                  if (open_directories == MAX_OPEN_DIRECTORIES)
+                    /* We have too many directories open already.
+                       Read the entire directory and then close it.  */
+                    dir_contents_file_exists_p (dc, 0);
+                }
+            }
+
+          /* Point the name-hashed entry for DIR at its contents data.  */
+          dir->contents = dc;
+        }
+    }
+
+  return dir;
+}
+
+/* Return 1 if the name FILENAME is entered in DIR's hash table.
+   FILENAME must contain no slashes.  */
+
+static int
+dir_contents_file_exists_p (struct directory_contents *dir,
+                            const char *filename)
+{
+  struct dirfile *df;
+  struct dirent *d;
+#ifdef WINDOWS32
+  struct stat st;
+  int rehash = 0;
+#endif
+
+  if (dir == 0 || dir->dirfiles.ht_vec == 0)
+    /* The directory could not be stat'd or opened.  */
+    return 0;
+
+#ifdef __MSDOS__
+  filename = dosify (filename);
+#endif
+
+#ifdef HAVE_CASE_INSENSITIVE_FS
+  filename = downcase (filename);
+#endif
+
+#ifdef __EMX__
+  if (filename != 0)
+    _fnlwr (filename); /* lower case for FAT drives */
+#endif
+
+#ifdef VMS
+  filename = vmsify (filename,0);
+#endif
+
+  if (filename != 0)
+    {
+      struct dirfile dirfile_key;
+
+      if (*filename == '\0')
+        {
+          /* Checking if the directory exists.  */
+          return 1;
+        }
+      dirfile_key.name = filename;
+      dirfile_key.length = strlen (filename);
+      df = hash_find_item (&dir->dirfiles, &dirfile_key);
+      if (df)
+        return !df->impossible;
+    }
+
+  /* The file was not found in the hashed list.
+     Try to read the directory further.  */
+
+  if (dir->dirstream == 0)
+    {
+#ifdef WINDOWS32
+      /*
+       * Check to see if directory has changed since last read. FAT
+       * filesystems force a rehash always as mtime does not change
+       * on directories (ugh!).
+       */
+      if (dir->path_key)
+        {
+          if ((dir->fs_flags & FS_FAT) != 0)
+            {
+              dir->mtime = time ((time_t *) 0);
+              rehash = 1;
+            }
+          else if (stat (dir->path_key, &st) == 0 && st.st_mtime > dir->mtime)
+            {
+              /* reset date stamp to show most recent re-process.  */
+              dir->mtime = st.st_mtime;
+              rehash = 1;
+            }
+
+          /* If it has been already read in, all done.  */
+          if (!rehash)
+            return 0;
+
+          /* make sure directory can still be opened; if not return.  */
+          dir->dirstream = opendir (dir->path_key);
+          if (!dir->dirstream)
+            return 0;
+        }
+      else
+#endif
+        /* The directory has been all read in.  */
+        return 0;
+    }
+
+  while (1)
+    {
+      /* Enter the file in the hash table.  */
+      unsigned int len;
+      struct dirfile dirfile_key;
+      struct dirfile **dirfile_slot;
+
+      ENULLLOOP (d, readdir (dir->dirstream));
+      if (d == 0)
+        {
+          if (errno)
+            pfatal_with_name ("INTERNAL: readdir");
+          break;
+        }
+
+#if defined(VMS) && defined(HAVE_DIRENT_H)
+      /* In VMS we get file versions too, which have to be stripped off */
+      {
+        char *p = strrchr (d->d_name, ';');
+        if (p)
+          *p = '\0';
+      }
+#endif
+      if (!REAL_DIR_ENTRY (d))
+        continue;
+
+      len = NAMLEN (d);
+      dirfile_key.name = d->d_name;
+      dirfile_key.length = len;
+      dirfile_slot = (struct dirfile **) hash_find_slot (&dir->dirfiles, &dirfile_key);
+#ifdef WINDOWS32
+      /*
+       * If re-reading a directory, don't cache files that have
+       * already been discovered.
+       */
+      if (! rehash || HASH_VACANT (*dirfile_slot))
+#endif
+        {
+          df = xmalloc (sizeof (struct dirfile));
+#if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
+          df->name = strcache_add_len (downcase (d->d_name), len);
+#else
+          df->name = strcache_add_len (d->d_name, len);
+#endif
+          df->length = len;
+          df->impossible = 0;
+          hash_insert_at (&dir->dirfiles, df, dirfile_slot);
+        }
+      /* Check if the name matches the one we're searching for.  */
+      if (filename != 0 && patheq (d->d_name, filename))
+        return 1;
+    }
+
+  /* If the directory has been completely read in,
+     close the stream and reset the pointer to nil.  */
+  if (d == 0)
+    {
+      --open_directories;
+      closedir (dir->dirstream);
+      dir->dirstream = 0;
+    }
+  return 0;
+}
+
+/* Return 1 if the name FILENAME in directory DIRNAME
+   is entered in the dir hash table.
+   FILENAME must contain no slashes.  */
+
+int
+dir_file_exists_p (const char *dirname, const char *filename)
+{
+  return dir_contents_file_exists_p (find_directory (dirname)->contents,
+                                     filename);
+}
+
+/* Return 1 if the file named NAME exists.  */
+
+int
+file_exists_p (const char *name)
+{
+  const char *dirend;
+  const char *dirname;
+  const char *slash;
+
+#ifndef NO_ARCHIVES
+  if (ar_name (name))
+    return ar_member_date (name) != (time_t) -1;
+#endif
+
+#ifdef VMS
+  dirend = strrchr (name, ']');
+  if (dirend == 0)
+    dirend = strrchr (name, ':');
+  if (dirend == 0)
+    return dir_file_exists_p ("[]", name);
+#else /* !VMS */
+  dirend = strrchr (name, '/');
+#ifdef HAVE_DOS_PATHS
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    const char *bslash = strrchr (name, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && name[0] && name[1] == ':')
+      dirend = name + 1;
+  }
+#endif /* HAVE_DOS_PATHS */
+  if (dirend == 0)
+#ifndef _AMIGA
+    return dir_file_exists_p (".", name);
+#else /* !VMS && !AMIGA */
+    return dir_file_exists_p ("", name);
+#endif /* AMIGA */
+#endif /* VMS */
+
+  slash = dirend;
+  if (dirend == name)
+    dirname = "/";
+  else
+    {
+      char *p;
+#ifdef HAVE_DOS_PATHS
+  /* d:/ and d: are *very* different...  */
+      if (dirend < name + 3 && name[1] == ':' &&
+          (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+        dirend++;
+#endif
+      p = alloca (dirend - name + 1);
+      memcpy (p, name, dirend - name);
+      p[dirend - name] = '\0';
+      dirname = p;
+    }
+  return dir_file_exists_p (dirname, slash + 1);
+}
+
+/* Mark FILENAME as 'impossible' for 'file_impossible_p'.
+   This means an attempt has been made to search for FILENAME
+   as an intermediate file, and it has failed.  */
+
+void
+file_impossible (const char *filename)
+{
+  const char *dirend;
+  const char *p = filename;
+  struct directory *dir;
+  struct dirfile *new;
+
+#ifdef VMS
+  dirend = strrchr (p, ']');
+  if (dirend == 0)
+    dirend = strrchr (p, ':');
+  dirend++;
+  if (dirend == (char *)1)
+    dir = find_directory ("[]");
+#else
+  dirend = strrchr (p, '/');
+# ifdef HAVE_DOS_PATHS
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    const char *bslash = strrchr (p, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && p[0] && p[1] == ':')
+      dirend = p + 1;
+  }
+# endif /* HAVE_DOS_PATHS */
+  if (dirend == 0)
+# ifdef _AMIGA
+    dir = find_directory ("");
+# else /* !VMS && !AMIGA */
+    dir = find_directory (".");
+# endif /* AMIGA */
+#endif /* VMS */
+  else
+    {
+      const char *dirname;
+      const char *slash = dirend;
+      if (dirend == p)
+        dirname = "/";
+      else
+        {
+          char *cp;
+#ifdef HAVE_DOS_PATHS
+          /* d:/ and d: are *very* different...  */
+          if (dirend < p + 3 && p[1] == ':' &&
+              (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+            dirend++;
+#endif
+          cp = alloca (dirend - p + 1);
+          memcpy (cp, p, dirend - p);
+          cp[dirend - p] = '\0';
+          dirname = cp;
+        }
+      dir = find_directory (dirname);
+      filename = p = slash + 1;
+    }
+
+  if (dir->contents == 0)
+    /* The directory could not be stat'd.  We allocate a contents
+       structure for it, but leave it out of the contents hash table.  */
+    dir->contents = xcalloc (sizeof (struct directory_contents));
+
+  if (dir->contents->dirfiles.ht_vec == 0)
+    {
+      hash_init (&dir->contents->dirfiles, DIRFILE_BUCKETS,
+                 dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
+    }
+
+  /* Make a new entry and put it in the table.  */
+
+  new = xmalloc (sizeof (struct dirfile));
+  new->length = strlen (filename);
+#if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
+  new->name = strcache_add_len (downcase (filename), new->length);
+#else
+  new->name = strcache_add_len (filename, new->length);
+#endif
+  new->impossible = 1;
+  hash_insert (&dir->contents->dirfiles, new);
+}
+
+/* Return nonzero if FILENAME has been marked impossible.  */
+
+int
+file_impossible_p (const char *filename)
+{
+  const char *dirend;
+  struct directory_contents *dir;
+  struct dirfile *dirfile;
+  struct dirfile dirfile_key;
+
+#ifdef VMS
+  dirend = strrchr (filename, ']');
+  if (dirend == 0)
+    dir = find_directory ("[]")->contents;
+#else
+  dirend = strrchr (filename, '/');
+#ifdef HAVE_DOS_PATHS
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    const char *bslash = strrchr (filename, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && filename[0] && filename[1] == ':')
+      dirend = filename + 1;
+  }
+#endif /* HAVE_DOS_PATHS */
+  if (dirend == 0)
+#ifdef _AMIGA
+    dir = find_directory ("")->contents;
+#else /* !VMS && !AMIGA */
+    dir = find_directory (".")->contents;
+#endif /* AMIGA */
+#endif /* VMS */
+  else
+    {
+      const char *dirname;
+      const char *slash = dirend;
+      if (dirend == filename)
+        dirname = "/";
+      else
+        {
+          char *cp;
+#ifdef HAVE_DOS_PATHS
+          /* d:/ and d: are *very* different...  */
+          if (dirend < filename + 3 && filename[1] == ':' &&
+              (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+            dirend++;
+#endif
+          cp = alloca (dirend - filename + 1);
+          memcpy (cp, filename, dirend - filename);
+          cp[dirend - filename] = '\0';
+          dirname = cp;
+        }
+      dir = find_directory (dirname)->contents;
+      filename = slash + 1;
+    }
+
+  if (dir == 0 || dir->dirfiles.ht_vec == 0)
+    /* There are no files entered for this directory.  */
+    return 0;
+
+#ifdef __MSDOS__
+  filename = dosify (filename);
+#endif
+#ifdef HAVE_CASE_INSENSITIVE_FS
+  filename = downcase (filename);
+#endif
+#ifdef VMS
+  filename = vmsify (filename, 1);
+#endif
+
+  dirfile_key.name = filename;
+  dirfile_key.length = strlen (filename);
+  dirfile = hash_find_item (&dir->dirfiles, &dirfile_key);
+  if (dirfile)
+    return dirfile->impossible;
+
+  return 0;
+}
+
+/* Return the already allocated name in the
+   directory hash table that matches DIR.  */
+
+const char *
+dir_name (const char *dir)
+{
+  return find_directory (dir)->name;
+}
+
+/* Print the data base of directories.  */
+
+void
+print_dir_data_base (void)
+{
+  unsigned int files;
+  unsigned int impossible;
+  struct directory **dir_slot;
+  struct directory **dir_end;
+
+  puts (_("\n# Directories\n"));
+
+  files = impossible = 0;
+
+  dir_slot = (struct directory **) directories.ht_vec;
+  dir_end = dir_slot + directories.ht_size;
+  for ( ; dir_slot < dir_end; dir_slot++)
+    {
+      struct directory *dir = *dir_slot;
+      if (! HASH_VACANT (dir))
+        {
+          if (dir->contents == 0)
+            printf (_("# %s: could not be stat'd.\n"), dir->name);
+          else if (dir->contents->dirfiles.ht_vec == 0)
+            {
+#ifdef WINDOWS32
+              printf (_("# %s (key %s, mtime %d): could not be opened.\n"),
+                      dir->name, dir->contents->path_key,dir->contents->mtime);
+#else  /* WINDOWS32 */
+#ifdef VMS
+              printf (_("# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"),
+                      dir->name, dir->contents->dev,
+                      dir->contents->ino[0], dir->contents->ino[1],
+                      dir->contents->ino[2]);
+#else
+              printf (_("# %s (device %ld, inode %ld): could not be opened.\n"),
+                      dir->name, (long int) dir->contents->dev,
+                      (long int) dir->contents->ino);
+#endif
+#endif /* WINDOWS32 */
+            }
+          else
+            {
+              unsigned int f = 0;
+              unsigned int im = 0;
+              struct dirfile **files_slot;
+              struct dirfile **files_end;
+
+              files_slot = (struct dirfile **) dir->contents->dirfiles.ht_vec;
+              files_end = files_slot + dir->contents->dirfiles.ht_size;
+              for ( ; files_slot < files_end; files_slot++)
+                {
+                  struct dirfile *df = *files_slot;
+                  if (! HASH_VACANT (df))
+                    {
+                      if (df->impossible)
+                        ++im;
+                      else
+                        ++f;
+                    }
+                }
+#ifdef WINDOWS32
+              printf (_("# %s (key %s, mtime %d): "),
+                      dir->name, dir->contents->path_key, dir->contents->mtime);
+#else  /* WINDOWS32 */
+#ifdef VMS
+              printf (_("# %s (device %d, inode [%d,%d,%d]): "),
+                      dir->name, dir->contents->dev,
+                      dir->contents->ino[0], dir->contents->ino[1],
+                      dir->contents->ino[2]);
+#else
+              printf (_("# %s (device %ld, inode %ld): "),
+                      dir->name,
+                      (long)dir->contents->dev, (long)dir->contents->ino);
+#endif
+#endif /* WINDOWS32 */
+              if (f == 0)
+                fputs (_("No"), stdout);
+              else
+                printf ("%u", f);
+              fputs (_(" files, "), stdout);
+              if (im == 0)
+                fputs (_("no"), stdout);
+              else
+                printf ("%u", im);
+              fputs (_(" impossibilities"), stdout);
+              if (dir->contents->dirstream == 0)
+                puts (".");
+              else
+                puts (_(" so far."));
+              files += f;
+              impossible += im;
+            }
+        }
+    }
+
+  fputs ("\n# ", stdout);
+  if (files == 0)
+    fputs (_("No"), stdout);
+  else
+    printf ("%u", files);
+  fputs (_(" files, "), stdout);
+  if (impossible == 0)
+    fputs (_("no"), stdout);
+  else
+    printf ("%u", impossible);
+  printf (_(" impossibilities in %lu directories.\n"), directories.ht_fill);
+}
+
+/* Hooks for globbing.  */
+
+#include <glob.h>
+
+/* Structure describing state of iterating through a directory hash table.  */
+
+struct dirstream
+  {
+    struct directory_contents *contents; /* The directory being read.  */
+    struct dirfile **dirfile_slot; /* Current slot in table.  */
+  };
+
+/* Forward declarations.  */
+static __ptr_t open_dirstream (const char *);
+static struct dirent *read_dirstream (__ptr_t);
+
+static __ptr_t
+open_dirstream (const char *directory)
+{
+  struct dirstream *new;
+  struct directory *dir = find_directory (directory);
+
+  if (dir->contents == 0 || dir->contents->dirfiles.ht_vec == 0)
+    /* DIR->contents is nil if the directory could not be stat'd.
+       DIR->contents->dirfiles is nil if it could not be opened.  */
+    return 0;
+
+  /* Read all the contents of the directory now.  There is no benefit
+     in being lazy, since glob will want to see every file anyway.  */
+
+  dir_contents_file_exists_p (dir->contents, 0);
+
+  new = xmalloc (sizeof (struct dirstream));
+  new->contents = dir->contents;
+  new->dirfile_slot = (struct dirfile **) new->contents->dirfiles.ht_vec;
+
+  return (__ptr_t) new;
+}
+
+static struct dirent *
+read_dirstream (__ptr_t stream)
+{
+  static char *buf;
+  static unsigned int bufsz;
+
+  struct dirstream *const ds = (struct dirstream *) stream;
+  struct directory_contents *dc = ds->contents;
+  struct dirfile **dirfile_end = (struct dirfile **) dc->dirfiles.ht_vec + dc->dirfiles.ht_size;
+
+  while (ds->dirfile_slot < dirfile_end)
+    {
+      struct dirfile *df = *ds->dirfile_slot++;
+      if (! HASH_VACANT (df) && !df->impossible)
+        {
+          /* The glob interface wants a 'struct dirent', so mock one up.  */
+          struct dirent *d;
+          unsigned int len = df->length + 1;
+          unsigned int sz = sizeof (*d) - sizeof (d->d_name) + len;
+          if (sz > bufsz)
+            {
+              bufsz *= 2;
+              if (sz > bufsz)
+                bufsz = sz;
+              buf = xrealloc (buf, bufsz);
+            }
+          d = (struct dirent *) buf;
+#ifdef __MINGW32__
+# if __MINGW32_MAJOR_VERSION < 3 || (__MINGW32_MAJOR_VERSION == 3 && \
+                                     __MINGW32_MINOR_VERSION == 0)
+          d->d_name = xmalloc (len);
+# endif
+#endif
+          FAKE_DIR_ENTRY (d);
+#ifdef _DIRENT_HAVE_D_NAMLEN
+          d->d_namlen = len - 1;
+#endif
+#ifdef _DIRENT_HAVE_D_TYPE
+          d->d_type = DT_UNKNOWN;
+#endif
+          memcpy (d->d_name, df->name, len);
+          return d;
+        }
+    }
+
+  return 0;
+}
+
+/* On 64 bit ReliantUNIX (5.44 and above) in LFS mode, stat() is actually a
+ * macro for stat64().  If stat is a macro, make a local wrapper function to
+ * invoke it.
+ *
+ * On MS-Windows, stat() "succeeds" for foo/bar/. where foo/bar is a
+ * regular file; fix that here.
+ */
+#if !defined(stat) && !defined(WINDOWS32)
+# ifndef VMS
+int stat (const char *path, struct stat *sbuf);
+# endif
+# define local_stat stat
+#else
+static int
+local_stat (const char *path, struct stat *buf)
+{
+  int e;
+#ifdef WINDOWS32
+  size_t plen = strlen (path);
+
+  /* Make sure the parent of "." exists and is a directory, not a
+     file.  This is because 'stat' on Windows normalizes the argument
+     foo/. => foo without checking first that foo is a directory.  */
+  if (plen > 1 && path[plen - 1] == '.'
+      && (path[plen - 2] == '/' || path[plen - 2] == '\\'))
+    {
+      char parent[MAXPATHLEN];
+
+      strncpy (parent, path, plen - 2);
+      parent[plen - 2] = '\0';
+      if (stat (parent, buf) < 0 || !_S_ISDIR (buf->st_mode))
+        return -1;
+    }
+#endif
+
+  EINTRLOOP (e, stat (path, buf));
+  return e;
+}
+#endif
+
+void
+dir_setup_glob (glob_t *gl)
+{
+  gl->gl_opendir = open_dirstream;
+  gl->gl_readdir = read_dirstream;
+  gl->gl_closedir = free;
+  gl->gl_stat = local_stat;
+  /* We don't bother setting gl_lstat, since glob never calls it.
+     The slot is only there for compatibility with 4.4 BSD.  */
+}
+
+void
+hash_init_directories (void)
+{
+  hash_init (&directories, DIRECTORY_BUCKETS,
+             directory_hash_1, directory_hash_2, directory_hash_cmp);
+  hash_init (&directory_contents, DIRECTORY_BUCKETS,
+             directory_contents_hash_1, directory_contents_hash_2,
+             directory_contents_hash_cmp);
+}
diff --git a/doc/Makefile.am b/doc/Makefile.am
new file mode 100644
index 0000000..03977ba
--- /dev/null
+++ b/doc/Makefile.am
@@ -0,0 +1,24 @@
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2000-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+TEXI2HTML = texi2html
+TEXI2HTML_FLAGS = -split_chapter
+
+info_TEXINFOS =	make.texi
+make_TEXINFOS = fdl.texi make-stds.texi
+
+CLEANFILES = make*.html
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..f930c6a
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,793 @@
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2000-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(make_TEXINFOS) $(top_srcdir)/config/mdate-sh \
+	$(srcdir)/version.texi $(srcdir)/stamp-vti \
+	$(top_srcdir)/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo "  DVIPS   " $@;
+am__v_DVIPS_1 = 
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
+am__v_MAKEINFO_1 = 
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
+am__v_INFOHTML_1 = 
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
+am__v_TEXI2DVI_1 = 
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
+am__v_TEXI2PDF_1 = 
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 = 
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 = 
+INFO_DEPS = $(srcdir)/make.info
+TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/config
+DVIS = make.dvi
+PDFS = make.pdf
+PSS = make.ps
+HTMLS = make.html
+TEXINFOS = make.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__installdirs = "$(DESTDIR)$(infodir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+TEXI2HTML = texi2html
+TEXI2HTML_FLAGS = -split_chapter
+info_TEXINFOS = make.texi
+make_TEXINFOS = fdl.texi make-stds.texi
+CLEANFILES = make*.html
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+.texi.info:
+	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ $<; \
+	then \
+	  rc=0; \
+	  $(am__cd) $(srcdir); \
+	else \
+	  rc=$$?; \
+	  $(am__cd) $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.pdf:
+	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.html:
+	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) $<; \
+	then \
+	  rm -rf $@ && mv $(@:.html=.htp) $@; \
+	else \
+	  rm -rf $(@:.html=.htp); exit 1; \
+	fi
+$(srcdir)/make.info: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.dvi: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.pdf: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.html: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: make.texi $(top_srcdir)/configure
+	@(dir=.; test -f ./make.texi || dir=$(srcdir); \
+	set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/make.texi`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp
+	@cmp -s vti.tmp $(srcdir)/version.texi \
+	  || (echo "Updating $(srcdir)/version.texi"; \
+	      cp vti.tmp $(srcdir)/version.texi)
+	-@rm -f vti.tmp
+	@cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+	-rm -f vti.tmp
+
+maintainer-clean-vti:
+	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
+.dvi.ps:
+	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf make.t2d make.t2p
+
+clean-aminfo:
+	-test -z "make.dvi make.pdf make.ps make.html" \
+	|| rm -rf make.dvi make.pdf make.ps make.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS)
+installdirs:
+	for dir in "$(DESTDIR)$(infodir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  d2=$$d$$p; \
+	  if test -d "$$d2"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d2"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+	cscopelist-am ctags-am dist-info distclean distclean-generic \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
+	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am \
+	uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/fdl.texi b/doc/fdl.texi
new file mode 100644
index 0000000..9c3bbe5
--- /dev/null
+++ b/doc/fdl.texi
@@ -0,0 +1,505 @@
+@c The GNU Free Documentation License.
+@center Version 1.3, 3 November 2008
+
+@c This file is intended to be included within another document,
+@c hence no sectioning command or @node.
+
+@display
+Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+@uref{http://fsf.org/}
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The ``Document'', below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as ``you''.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+ASCII without markup, Texinfo input format, La@TeX{} input
+format, SGML or XML using a publicly available
+DTD, and standard-conforming simple HTML,
+PostScript or PDF designed for human modification.  Examples
+of transparent image formats include PNG, XCF and
+JPG@.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, SGML or
+XML for which the DTD and/or processing tools are
+not generally available, and the machine-generated HTML,
+PostScript or PDF produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The ``publisher'' means any person or entity that distributes copies
+of the Document to the public.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''.  Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''.  You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+@item
+RELICENSING
+
+``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+
+``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+
+``Incorporate'' means to publish or republish a Document, in whole or
+in part, as part of another Document.
+
+An MMC is ``eligible for relicensing'' if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+  Copyright (C)  @var{year}  @var{your name}.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with@dots{}Texts.''@: line with this:
+
+@smallexample
+@group
+    with the Invariant Sections being @var{list their titles}, with
+    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+    being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
diff --git a/doc/make-stds.texi b/doc/make-stds.texi
new file mode 100644
index 0000000..db01628
--- /dev/null
+++ b/doc/make-stds.texi
@@ -0,0 +1,1172 @@
+@comment This file is included by both standards.texi and make.texinfo.
+@comment It was broken out of standards.texi on 1/6/93 by roland.
+
+@node Makefile Conventions
+@chapter Makefile Conventions
+@cindex makefile, conventions for
+@cindex conventions for makefiles
+@cindex standards for makefiles
+
+@c Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001,
+@c 2004, 2005, 2006, 2007, 2008, 2010, 2013 Free Software Foundation, Inc.
+@c
+@c Permission is granted to copy, distribute and/or modify this document
+@c under the terms of the GNU Free Documentation License, Version 1.3
+@c or any later version published by the Free Software Foundation;
+@c with no Invariant Sections, with no
+@c Front-Cover Texts, and with no Back-Cover Texts.
+@c A copy of the license is included in the section entitled ``GNU
+@c Free Documentation License''.
+
+This
+@ifinfo
+node
+@end ifinfo
+@iftex
+@ifset CODESTD
+section
+@end ifset
+@ifclear CODESTD
+chapter
+@end ifclear
+@end iftex
+describes conventions for writing the Makefiles for GNU programs.
+Using Automake will help you write a Makefile that follows these
+conventions.  For more information on portable Makefiles, see
+@sc{posix} and @ref{Portable Make, Portable Make Programming,, autoconf,
+Autoconf}.
+
+
+@menu
+* Makefile Basics::             General conventions for Makefiles.
+* Utilities in Makefiles::      Utilities to be used in Makefiles.
+* Command Variables::           Variables for specifying commands.
+* DESTDIR::                     Supporting staged installs.
+* Directory Variables::         Variables for installation directories.
+* Standard Targets::            Standard targets for users.
+* Install Command Categories::  Three categories of commands in the `install'
+                                  rule: normal, pre-install and post-install.
+@end menu
+
+@node Makefile Basics
+@section General Conventions for Makefiles
+
+Every Makefile should contain this line:
+
+@example
+SHELL = /bin/sh
+@end example
+
+@noindent
+to avoid trouble on systems where the @code{SHELL} variable might be
+inherited from the environment.  (This is never a problem with GNU
+@code{make}.)
+
+Different @code{make} programs have incompatible suffix lists and
+implicit rules, and this sometimes creates confusion or misbehavior.  So
+it is a good idea to set the suffix list explicitly using only the
+suffixes you need in the particular Makefile, like this:
+
+@example
+.SUFFIXES:
+.SUFFIXES: .c .o
+@end example
+
+@noindent
+The first line clears out the suffix list, the second introduces all
+suffixes which may be subject to implicit rules in this Makefile.
+
+Don't assume that @file{.} is in the path for command execution.  When
+you need to run programs that are a part of your package during the
+make, please make sure that it uses @file{./} if the program is built as
+part of the make or @file{$(srcdir)/} if the file is an unchanging part
+of the source code.  Without one of these prefixes, the current search
+path is used.
+
+The distinction between @file{./} (the @dfn{build directory}) and
+@file{$(srcdir)/} (the @dfn{source directory}) is important because
+users can build in a separate directory using the @samp{--srcdir} option
+to @file{configure}.  A rule of the form:
+
+@smallexample
+foo.1 : foo.man sedscript
+        sed -f sedscript foo.man > foo.1
+@end smallexample
+
+@noindent
+will fail when the build directory is not the source directory, because
+@file{foo.man} and @file{sedscript} are in the source directory.
+
+When using GNU @code{make}, relying on @samp{VPATH} to find the source
+file will work in the case where there is a single dependency file,
+since the @code{make} automatic variable @samp{$<} will represent the
+source file wherever it is.  (Many versions of @code{make} set @samp{$<}
+only in implicit rules.)  A Makefile target like
+
+@smallexample
+foo.o : bar.c
+        $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
+@end smallexample
+
+@noindent
+should instead be written as
+
+@smallexample
+foo.o : bar.c
+        $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@
+@end smallexample
+
+@noindent
+in order to allow @samp{VPATH} to work correctly.  When the target has
+multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest
+way to make the rule work well.  For example, the target above for
+@file{foo.1} is best written as:
+
+@smallexample
+foo.1 : foo.man sedscript
+        sed -f $(srcdir)/sedscript $(srcdir)/foo.man > $@@
+@end smallexample
+
+GNU distributions usually contain some files which are not source
+files---for example, Info files, and the output from Autoconf, Automake,
+Bison or Flex.  Since these files normally appear in the source
+directory, they should always appear in the source directory, not in the
+build directory.  So Makefile rules to update them should put the
+updated files in the source directory.
+
+However, if a file does not appear in the distribution, then the
+Makefile should not put it in the source directory, because building a
+program in ordinary circumstances should not modify the source directory
+in any way.
+
+Try to make the build and installation targets, at least (and all their
+subtargets) work correctly with a parallel @code{make}.
+
+@node Utilities in Makefiles
+@section Utilities in Makefiles
+
+Write the Makefile commands (and any shell scripts, such as
+@code{configure}) to run under @code{sh} (both the traditional Bourne
+shell and the @sc{posix} shell), not @code{csh}.  Don't use any
+special features of @code{ksh} or @code{bash}, or @sc{posix} features
+not widely supported in traditional Bourne @code{sh}.
+
+The @code{configure} script and the Makefile rules for building and
+installation should not use any utilities directly except these:
+
+@c dd find
+@c gunzip gzip md5sum
+@c mkfifo mknod tee uname
+
+@example
+awk cat cmp cp diff echo egrep expr false grep install-info ln ls
+mkdir mv printf pwd rm rmdir sed sleep sort tar test touch tr true
+@end example
+
+Compression programs such as @code{gzip} can be used in the
+@code{dist} rule.
+
+Generally, stick to the widely-supported (usually
+@sc{posix}-specified) options and features of these programs.  For
+example, don't use @samp{mkdir -p}, convenient as it may be, because a
+few systems don't support it at all and with others, it is not safe
+for parallel execution.  For a list of known incompatibilities, see
+@ref{Portable Shell, Portable Shell Programming,, autoconf, Autoconf}.
+
+
+It is a good idea to avoid creating symbolic links in makefiles, since a
+few file systems don't support them.
+
+The Makefile rules for building and installation can also use compilers
+and related programs, but should do so via @code{make} variables so that the
+user can substitute alternatives.  Here are some of the programs we
+mean:
+
+@example
+ar bison cc flex install ld ldconfig lex
+make makeinfo ranlib texi2dvi yacc
+@end example
+
+Use the following @code{make} variables to run those programs:
+
+@example
+$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
+$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
+@end example
+
+When you use @code{ranlib} or @code{ldconfig}, you should make sure
+nothing bad happens if the system does not have the program in question.
+Arrange to ignore an error from that command, and print a message before
+the command to tell the user that failure of this command does not mean
+a problem.  (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
+this.)
+
+If you use symbolic links, you should implement a fallback for systems
+that don't have symbolic links.
+
+Additional utilities that can be used via Make variables are:
+
+@example
+chgrp chmod chown mknod
+@end example
+
+It is ok to use other utilities in Makefile portions (or scripts)
+intended only for particular systems where you know those utilities
+exist.
+
+@node Command Variables
+@section Variables for Specifying Commands
+
+Makefiles should provide variables for overriding certain commands, options,
+and so on.
+
+In particular, you should run most utility programs via variables.
+Thus, if you use Bison, have a variable named @code{BISON} whose default
+value is set with @samp{BISON = bison}, and refer to it with
+@code{$(BISON)} whenever you need to use Bison.
+
+File management utilities such as @code{ln}, @code{rm}, @code{mv}, and
+so on, need not be referred to through variables in this way, since users
+don't need to replace them with other programs.
+
+Each program-name variable should come with an options variable that is
+used to supply options to the program.  Append @samp{FLAGS} to the
+program-name variable name to get the options variable name---for
+example, @code{BISONFLAGS}.  (The names @code{CFLAGS} for the C
+compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
+exceptions to this rule, but we keep them because they are standard.)
+Use @code{CPPFLAGS} in any compilation command that runs the
+preprocessor, and use @code{LDFLAGS} in any compilation command that
+does linking as well as in any direct use of @code{ld}.
+
+If there are C compiler options that @emph{must} be used for proper
+compilation of certain files, do not include them in @code{CFLAGS}.
+Users expect to be able to specify @code{CFLAGS} freely themselves.
+Instead, arrange to pass the necessary options to the C compiler
+independently of @code{CFLAGS}, by writing them explicitly in the
+compilation commands or by defining an implicit rule, like this:
+
+@smallexample
+CFLAGS = -g
+ALL_CFLAGS = -I. $(CFLAGS)
+.c.o:
+        $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
+@end smallexample
+
+Do include the @samp{-g} option in @code{CFLAGS}, because that is not
+@emph{required} for proper compilation.  You can consider it a default
+that is only recommended.  If the package is set up so that it is
+compiled with GCC by default, then you might as well include @samp{-O}
+in the default value of @code{CFLAGS} as well.
+
+Put @code{CFLAGS} last in the compilation command, after other variables
+containing compiler options, so the user can use @code{CFLAGS} to
+override the others.
+
+@code{CFLAGS} should be used in every invocation of the C compiler,
+both those which do compilation and those which do linking.
+
+Every Makefile should define the variable @code{INSTALL}, which is the
+basic command for installing a file into the system.
+
+Every Makefile should also define the variables @code{INSTALL_PROGRAM}
+and @code{INSTALL_DATA}.  (The default for @code{INSTALL_PROGRAM} should
+be @code{$(INSTALL)}; the default for @code{INSTALL_DATA} should be
+@code{$@{INSTALL@} -m 644}.)  Then it should use those variables as the
+commands for actual installation, for executables and non-executables
+respectively.  Minimal use of these variables is as follows:
+
+@example
+$(INSTALL_PROGRAM) foo $(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
+@end example
+
+However, it is preferable to support a @code{DESTDIR} prefix on the
+target files, as explained in the next section.
+
+It is acceptable, but not required, to install multiple files in one
+command, with the final argument being a directory, as in:
+
+@example
+$(INSTALL_PROGRAM) foo bar baz $(bindir)
+@end example
+
+
+@node DESTDIR
+@section @code{DESTDIR}: Support for Staged Installs
+
+@vindex DESTDIR
+@cindex staged installs
+@cindex installations, staged
+
+@code{DESTDIR} is a variable prepended to each installed target file,
+like this:
+
+@example
+$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
+@end example
+
+The @code{DESTDIR} variable is specified by the user on the @code{make}
+command line as an absolute file name.  For example:
+
+@example
+make DESTDIR=/tmp/stage install
+@end example
+
+@noindent
+@code{DESTDIR} should be supported only in the @code{install*} and
+@code{uninstall*} targets, as those are the only targets where it is
+useful.
+
+If your installation step would normally install
+@file{/usr/local/bin/foo} and @file{/usr/@/local/@/lib/@/libfoo.a}, then an
+installation invoked as in the example above would install
+@file{/tmp/stage/usr/local/bin/foo} and
+@file{/tmp/stage/usr/local/lib/libfoo.a} instead.
+
+Prepending the variable @code{DESTDIR} to each target in this way
+provides for @dfn{staged installs}, where the installed files are not
+placed directly into their expected location but are instead copied
+into a temporary location (@code{DESTDIR}).  However, installed files
+maintain their relative directory structure and any embedded file names
+will not be modified.
+
+You should not set the value of @code{DESTDIR} in your @file{Makefile}
+at all; then the files are installed into their expected locations by
+default.  Also, specifying @code{DESTDIR} should not change the
+operation of the software in any way, so its value should not be
+included in any file contents.
+
+@code{DESTDIR} support is commonly used in package creation.  It is
+also helpful to users who want to understand what a given package will
+install where, and to allow users who don't normally have permissions
+to install into protected areas to build and install before gaining
+those permissions.  Finally, it can be useful with tools such as
+@code{stow}, where code is installed in one place but made to appear
+to be installed somewhere else using symbolic links or special mount
+operations.  So, we strongly recommend GNU packages support
+@code{DESTDIR}, though it is not an absolute requirement.
+
+
+@node Directory Variables
+@section Variables for Installation Directories
+
+Installation directories should always be named by variables, so it is
+easy to install in a nonstandard place.  The standard names for these
+variables and the values they should have in GNU packages are
+described below.  They are based on a standard file system layout;
+variants of it are used in GNU/Linux and other modern operating
+systems.
+
+Installers are expected to override these values when calling
+@command{make} (e.g., @kbd{make prefix=/usr install} or
+@command{configure} (e.g., @kbd{configure --prefix=/usr}).  GNU
+packages should not try to guess which value should be appropriate for
+these variables on the system they are being installed onto: use the
+default settings specified here so that all GNU packages behave
+identically, allowing the installer to achieve any desired layout.
+
+@cindex directories, creating installation
+@cindex installation directories, creating
+All installation directories, and their parent directories, should be
+created (if necessary) before they are installed into.
+
+These first two variables set the root for the installation.  All the
+other installation directories should be subdirectories of one of
+these two, and nothing should be directly installed into these two
+directories.
+
+@table @code
+@item prefix
+@vindex prefix
+A prefix used in constructing the default values of the variables listed
+below.  The default value of @code{prefix} should be @file{/usr/local}.
+When building the complete GNU system, the prefix will be empty and
+@file{/usr} will be a symbolic link to @file{/}.
+(If you are using Autoconf, write it as @samp{@@prefix@@}.)
+
+Running @samp{make install} with a different value of @code{prefix} from
+the one used to build the program should @emph{not} recompile the
+program.
+
+@item exec_prefix
+@vindex exec_prefix
+A prefix used in constructing the default values of some of the
+variables listed below.  The default value of @code{exec_prefix} should
+be @code{$(prefix)}.
+(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
+
+Generally, @code{$(exec_prefix)} is used for directories that contain
+machine-specific files (such as executables and subroutine libraries),
+while @code{$(prefix)} is used directly for other directories.
+
+Running @samp{make install} with a different value of @code{exec_prefix}
+from the one used to build the program should @emph{not} recompile the
+program.
+@end table
+
+Executable programs are installed in one of the following directories.
+
+@table @code
+@item bindir
+@vindex bindir
+The directory for installing executable programs that users can run.
+This should normally be @file{/usr/local/bin}, but write it as
+@file{$(exec_prefix)/bin}.
+(If you are using Autoconf, write it as @samp{@@bindir@@}.)
+
+@item sbindir
+@vindex sbindir
+The directory for installing executable programs that can be run from
+the shell, but are only generally useful to system administrators.  This
+should normally be @file{/usr/local/sbin}, but write it as
+@file{$(exec_prefix)/sbin}.
+(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
+
+@item libexecdir
+@vindex libexecdir
+@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
+The directory for installing executable programs to be run by other
+programs rather than by users.  This directory should normally be
+@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
+(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
+
+The definition of @samp{libexecdir} is the same for all packages, so
+you should install your data in a subdirectory thereof.  Most packages
+install their data under @file{$(libexecdir)/@var{package-name}/},
+possibly within additional subdirectories thereof, such as
+@file{$(libexecdir)/@var{package-name}/@var{machine}/@var{version}}.
+@end table
+
+Data files used by the program during its execution are divided into
+categories in two ways.
+
+@itemize @bullet
+@item
+Some files are normally modified by programs; others are never normally
+modified (though users may edit some of these).
+
+@item
+Some files are architecture-independent and can be shared by all
+machines at a site; some are architecture-dependent and can be shared
+only by machines of the same kind and operating system; others may never
+be shared between two machines.
+@end itemize
+
+This makes for six different possibilities.  However, we want to
+discourage the use of architecture-dependent files, aside from object
+files and libraries.  It is much cleaner to make other data files
+architecture-independent, and it is generally not hard.
+
+Here are the variables Makefiles should use to specify directories
+to put these various kinds of files in:
+
+@table @samp
+@item datarootdir
+The root of the directory tree for read-only architecture-independent
+data files.  This should normally be @file{/usr/local/share}, but
+write it as @file{$(prefix)/share}.  (If you are using Autoconf, write
+it as @samp{@@datarootdir@@}.)  @samp{datadir}'s default value is
+based on this variable; so are @samp{infodir}, @samp{mandir}, and
+others.
+
+@item datadir
+The directory for installing idiosyncratic read-only
+architecture-independent data files for this program.  This is usually
+the same place as @samp{datarootdir}, but we use the two separate
+variables so that you can move these program-specific files without
+altering the location for Info files, man pages, etc.
+
+@c raggedright  (not until next Texinfo release)
+This should normally be @file{/usr/local/share}, but write it as
+@file{$(datarootdir)}.  (If you are using Autoconf, write it as
+@samp{@@datadir@@}.)
+@c end raggedright
+
+The definition of @samp{datadir} is the same for all packages, so you
+should install your data in a subdirectory thereof.  Most packages
+install their data under @file{$(datadir)/@var{package-name}/}.
+
+@item sysconfdir
+The directory for installing read-only data files that pertain to a
+single machine--that is to say, files for configuring a host.  Mailer
+and network configuration files, @file{/etc/passwd}, and so forth belong
+here.  All the files in this directory should be ordinary ASCII text
+files.  This directory should normally be @file{/usr/local/etc}, but
+write it as @file{$(prefix)/etc}.
+(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
+
+Do not install executables here in this directory (they probably belong
+in @file{$(libexecdir)} or @file{$(sbindir)}).  Also do not install
+files that are modified in the normal course of their use (programs
+whose purpose is to change the configuration of the system excluded).
+Those probably belong in @file{$(localstatedir)}.
+
+@item sharedstatedir
+The directory for installing architecture-independent data files which
+the programs modify while they run.  This should normally be
+@file{/usr/local/com}, but write it as @file{$(prefix)/com}.
+(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
+
+@item localstatedir
+The directory for installing data files which the programs modify while
+they run, and that pertain to one specific machine.  Users should never
+need to modify files in this directory to configure the package's
+operation; put such configuration information in separate files that go
+in @file{$(datadir)} or @file{$(sysconfdir)}.  @file{$(localstatedir)}
+should normally be @file{/usr/local/var}, but write it as
+@file{$(prefix)/var}.
+(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
+
+@item runstatedir
+The directory for installing data files which the programs modify
+while they run, that pertain to one specific machine, and which need
+not persist longer than the execution of the program---which is
+generally long-lived, for example, until the next reboot.  PID files
+for system daemons are a typical use.  In addition, this directory
+should not be cleaned except perhaps at reboot, while the general
+@file{/tmp} (@code{TMPDIR}) may be cleaned arbitrarily.  This should
+normally be @file{/var/run}, but write it as
+@file{$(localstatedir)/run}.  Having it as a separate variable allows
+the use of @file{/run} if desired, for example.  (If you are using
+Autoconf 2.70 or later, write it as @samp{@@runstatedir@@}.)
+@end table
+
+These variables specify the directory for installing certain specific
+types of files, if your program has them.  Every GNU package should
+have Info files, so every program needs @samp{infodir}, but not all
+need @samp{libdir} or @samp{lispdir}.
+
+@table @samp
+@item includedir
+The directory for installing header files to be included by user
+programs with the C @samp{#include} preprocessor directive.  This
+should normally be @file{/usr/local/include}, but write it as
+@file{$(prefix)/include}.
+(If you are using Autoconf, write it as @samp{@@includedir@@}.)
+
+Most compilers other than GCC do not look for header files in directory
+@file{/usr/local/include}.  So installing the header files this way is
+only useful with GCC.  Sometimes this is not a problem because some
+libraries are only really intended to work with GCC.  But some libraries
+are intended to work with other compilers.  They should install their
+header files in two places, one specified by @code{includedir} and one
+specified by @code{oldincludedir}.
+
+@item oldincludedir
+The directory for installing @samp{#include} header files for use with
+compilers other than GCC.  This should normally be @file{/usr/include}.
+(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
+
+The Makefile commands should check whether the value of
+@code{oldincludedir} is empty.  If it is, they should not try to use
+it; they should cancel the second installation of the header files.
+
+A package should not replace an existing header in this directory unless
+the header came from the same package.  Thus, if your Foo package
+provides a header file @file{foo.h}, then it should install the header
+file in the @code{oldincludedir} directory if either (1) there is no
+@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo
+package.
+
+To tell whether @file{foo.h} came from the Foo package, put a magic
+string in the file---part of a comment---and @code{grep} for that string.
+
+@item docdir
+The directory for installing documentation files (other than Info) for
+this package.  By default, it should be
+@file{/usr/local/share/doc/@var{yourpkg}}, but it should be written as
+@file{$(datarootdir)/doc/@var{yourpkg}}.  (If you are using Autoconf,
+write it as @samp{@@docdir@@}.)  The @var{yourpkg} subdirectory, which
+may include a version number, prevents collisions among files with
+common names, such as @file{README}.
+
+@item infodir
+The directory for installing the Info files for this package.  By
+default, it should be @file{/usr/local/share/info}, but it should be
+written as @file{$(datarootdir)/info}.  (If you are using Autoconf,
+write it as @samp{@@infodir@@}.)  @code{infodir} is separate from
+@code{docdir} for compatibility with existing practice.
+
+@item htmldir
+@itemx dvidir
+@itemx pdfdir
+@itemx psdir
+Directories for installing documentation files in the particular
+format.  They should all be set to @code{$(docdir)} by default.  (If
+you are using Autoconf, write them as @samp{@@htmldir@@},
+@samp{@@dvidir@@}, etc.)  Packages which supply several translations
+of their documentation should install them in
+@samp{$(htmldir)/}@var{ll}, @samp{$(pdfdir)/}@var{ll}, etc. where
+@var{ll} is a locale abbreviation such as @samp{en} or @samp{pt_BR}.
+
+@item libdir
+The directory for object files and libraries of object code.  Do not
+install executables here, they probably ought to go in @file{$(libexecdir)}
+instead.  The value of @code{libdir} should normally be
+@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
+(If you are using Autoconf, write it as @samp{@@libdir@@}.)
+
+@item lispdir
+The directory for installing any Emacs Lisp files in this package.  By
+default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
+should be written as @file{$(datarootdir)/emacs/site-lisp}.
+
+If you are using Autoconf, write the default as @samp{@@lispdir@@}.
+In order to make @samp{@@lispdir@@} work, you need the following lines
+in your @file{configure.ac} file:
+
+@example
+lispdir='$@{datarootdir@}/emacs/site-lisp'
+AC_SUBST(lispdir)
+@end example
+
+@item localedir
+The directory for installing locale-specific message catalogs for this
+package.  By default, it should be @file{/usr/local/share/locale}, but
+it should be written as @file{$(datarootdir)/locale}.  (If you are
+using Autoconf, write it as @samp{@@localedir@@}.)  This directory
+usually has a subdirectory per locale.
+@end table
+
+Unix-style man pages are installed in one of the following:
+
+@table @samp
+@item mandir
+The top-level directory for installing the man pages (if any) for this
+package.  It will normally be @file{/usr/local/share/man}, but you
+should write it as @file{$(datarootdir)/man}.  (If you are using
+Autoconf, write it as @samp{@@mandir@@}.)
+
+@item man1dir
+The directory for installing section 1 man pages.  Write it as
+@file{$(mandir)/man1}.
+@item man2dir
+The directory for installing section 2 man pages.  Write it as
+@file{$(mandir)/man2}
+@item @dots{}
+
+@strong{Don't make the primary documentation for any GNU software be a
+man page.  Write a manual in Texinfo instead.  Man pages are just for
+the sake of people running GNU software on Unix, which is a secondary
+application only.}
+
+@item manext
+The file name extension for the installed man page.  This should contain
+a period followed by the appropriate digit; it should normally be @samp{.1}.
+
+@item man1ext
+The file name extension for installed section 1 man pages.
+@item man2ext
+The file name extension for installed section 2 man pages.
+@item @dots{}
+Use these names instead of @samp{manext} if the package needs to install man
+pages in more than one section of the manual.
+@end table
+
+And finally, you should set the following variable:
+
+@table @samp
+@item srcdir
+The directory for the sources being compiled.  The value of this
+variable is normally inserted by the @code{configure} shell script.
+(If you are using Autoconf, use @samp{srcdir = @@srcdir@@}.)
+@end table
+
+For example:
+
+@smallexample
+@c I have changed some of the comments here slightly to fix an overfull
+@c hbox, so the make manual can format correctly. --roland
+# Common prefix for installation directories.
+# NOTE: This directory must exist when you start the install.
+prefix = /usr/local
+datarootdir = $(prefix)/share
+datadir = $(datarootdir)
+exec_prefix = $(prefix)
+# Where to put the executable for the command `gcc'.
+bindir = $(exec_prefix)/bin
+# Where to put the directories used by the compiler.
+libexecdir = $(exec_prefix)/libexec
+# Where to put the Info files.
+infodir = $(datarootdir)/info
+@end smallexample
+
+If your program installs a large number of files into one of the
+standard user-specified directories, it might be useful to group them
+into a subdirectory particular to that program.  If you do this, you
+should write the @code{install} rule to create these subdirectories.
+
+Do not expect the user to include the subdirectory name in the value of
+any of the variables listed above.  The idea of having a uniform set of
+variable names for installation directories is to enable the user to
+specify the exact same values for several different GNU packages.  In
+order for this to be useful, all the packages must be designed so that
+they will work sensibly when the user does so.
+
+At times, not all of these variables may be implemented in the current
+release of Autoconf and/or Automake; but as of Autoconf@tie{}2.60, we
+believe all of them are.  When any are missing, the descriptions here
+serve as specifications for what Autoconf will implement.  As a
+programmer, you can either use a development version of Autoconf or
+avoid using these variables until a stable release is made which
+supports them.
+
+
+@node Standard Targets
+@section Standard Targets for Users
+
+All GNU programs should have the following targets in their Makefiles:
+
+@table @samp
+@item all
+Compile the entire program.  This should be the default target.  This
+target need not rebuild any documentation files; Info files should
+normally be included in the distribution, and DVI (and other
+documentation format) files should be made only when explicitly asked
+for.
+
+By default, the Make rules should compile and link with @samp{-g}, so
+that executable programs have debugging symbols.  Otherwise, you are
+essentially helpless in the face of a crash, and it is often far from
+easy to reproduce with a fresh build.
+
+@item install
+Compile the program and copy the executables, libraries, and so on to
+the file names where they should reside for actual use.  If there is a
+simple test to verify that a program is properly installed, this target
+should run that test.
+
+Do not strip executables when installing them.  This helps eventual
+debugging that may be needed later, and nowadays disk space is cheap
+and dynamic loaders typically ensure debug sections are not loaded during
+normal execution.  Users that need stripped binaries may invoke the
+@code{install-strip} target to do that.
+
+If possible, write the @code{install} target rule so that it does not
+modify anything in the directory where the program was built, provided
+@samp{make all} has just been done.  This is convenient for building the
+program under one user name and installing it under another.
+
+The commands should create all the directories in which files are to be
+installed, if they don't already exist.  This includes the directories
+specified as the values of the variables @code{prefix} and
+@code{exec_prefix}, as well as all subdirectories that are needed.
+One way to do this is by means of an @code{installdirs} target
+as described below.
+
+Use @samp{-} before any command for installing a man page, so that
+@code{make} will ignore any errors.  This is in case there are systems
+that don't have the Unix man page documentation system installed.
+
+The way to install Info files is to copy them into @file{$(infodir)}
+with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
+the @code{install-info} program if it is present.  @code{install-info}
+is a program that edits the Info @file{dir} file to add or update the
+menu entry for the given Info file; it is part of the Texinfo package.
+
+Here is a sample rule to install an Info file that also tries to
+handle some additional situations, such as @code{install-info} not
+being present.
+
+@comment This example has been carefully formatted for the Make manual.
+@comment Please do not reformat it without talking to bug-make@gnu.org.
+@smallexample
+do-install-info: foo.info installdirs
+        $(NORMAL_INSTALL)
+# Prefer an info file in . to one in srcdir.
+        if test -f foo.info; then d=.; \
+         else d="$(srcdir)"; fi; \
+        $(INSTALL_DATA) $$d/foo.info \
+          "$(DESTDIR)$(infodir)/foo.info"
+# Run install-info only if it exists.
+# Use `if' instead of just prepending `-' to the
+# line so we notice real errors from install-info.
+# Use `$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+        $(POST_INSTALL)
+        if $(SHELL) -c 'install-info --version' \
+           >/dev/null 2>&1; then \
+          install-info --dir-file="$(DESTDIR)$(infodir)/dir" \
+                       "$(DESTDIR)$(infodir)/foo.info"; \
+        else true; fi
+@end smallexample
+
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.  @xref{Install Command
+Categories}.
+
+@item install-html
+@itemx install-dvi
+@itemx install-pdf
+@itemx install-ps
+These targets install documentation in formats other than Info;
+they're intended to be called explicitly by the person installing the
+package, if that format is desired.  GNU prefers Info files, so these
+must be installed by the @code{install} target.
+
+When you have many documentation files to install, we recommend that
+you avoid collisions and clutter by arranging for these targets to
+install in subdirectories of the appropriate installation directory,
+such as @code{htmldir}.  As one example, if your package has multiple
+manuals, and you wish to install HTML documentation with many files
+(such as the ``split'' mode output by @code{makeinfo --html}), you'll
+certainly want to use subdirectories, or two nodes with the same name
+in different manuals will overwrite each other.
+
+Please make these @code{install-@var{format}} targets invoke the
+commands for the @var{format} target, for example, by making
+@var{format} a dependency.
+
+@item uninstall
+Delete all the installed files---the copies that the @samp{install}
+and @samp{install-*} targets create.
+
+This rule should not modify the directories where compilation is done,
+only the directories where files are installed.
+
+The uninstallation commands are divided into three categories, just like
+the installation commands.  @xref{Install Command Categories}.
+
+@item install-strip
+Like @code{install}, but strip the executable files while installing
+them.  In simple cases, this target can use the @code{install} target in
+a simple way:
+
+@smallexample
+install-strip:
+        $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+                install
+@end smallexample
+
+But if the package installs scripts as well as real executables, the
+@code{install-strip} target can't just refer to the @code{install}
+target; it has to strip the executables but not the scripts.
+
+@code{install-strip} should not strip the executables in the build
+directory which are being copied for installation.  It should only strip
+the copies that are installed.
+
+Normally we do not recommend stripping an executable unless you are sure
+the program has no bugs.  However, it can be reasonable to install a
+stripped executable for actual execution while saving the unstripped
+executable elsewhere in case there is a bug.
+
+@item clean
+Delete all files in the current directory that are normally created by
+building the program.  Also delete files in other directories if they
+are created by this makefile.  However, don't delete the files that
+record the configuration.  Also preserve files that could be made by
+building, but normally aren't because the distribution comes with
+them.  There is no need to delete parent directories that were created
+with @samp{mkdir -p}, since they could have existed anyway.
+
+Delete @file{.dvi} files here if they are not part of the distribution.
+
+@item distclean
+Delete all files in the current directory (or created by this
+makefile) that are created by configuring or building the program.  If
+you have unpacked the source and built the program without creating
+any other files, @samp{make distclean} should leave only the files
+that were in the distribution.  However, there is no need to delete
+parent directories that were created with @samp{mkdir -p}, since they
+could have existed anyway.
+
+@item mostlyclean
+Like @samp{clean}, but may refrain from deleting a few files that people
+normally don't want to recompile.  For example, the @samp{mostlyclean}
+target for GCC does not delete @file{libgcc.a}, because recompiling it
+is rarely necessary and takes a lot of time.
+
+@item maintainer-clean
+Delete almost everything that can be reconstructed with this Makefile.
+This typically includes everything deleted by @code{distclean}, plus
+more: C source files produced by Bison, tags tables, Info files, and
+so on.
+
+The reason we say ``almost everything'' is that running the command
+@samp{make maintainer-clean} should not delete @file{configure} even
+if @file{configure} can be remade using a rule in the Makefile.  More
+generally, @samp{make maintainer-clean} should not delete anything
+that needs to exist in order to run @file{configure} and then begin to
+build the program.  Also, there is no need to delete parent
+directories that were created with @samp{mkdir -p}, since they could
+have existed anyway.  These are the only exceptions;
+@code{maintainer-clean} should delete everything else that can be
+rebuilt.
+
+The @samp{maintainer-clean} target is intended to be used by a maintainer of
+the package, not by ordinary users.  You may need special tools to
+reconstruct some of the files that @samp{make maintainer-clean} deletes.
+Since these files are normally included in the distribution, we don't
+take care to make them easy to reconstruct.  If you find you need to
+unpack the full distribution again, don't blame us.
+
+To help make users aware of this, the commands for the special
+@code{maintainer-clean} target should start with these two:
+
+@smallexample
+@@echo 'This command is intended for maintainers to use; it'
+@@echo 'deletes files that may need special tools to rebuild.'
+@end smallexample
+
+@item TAGS
+Update a tags table for this program.
+@c ADR: how?
+
+@item info
+Generate any Info files needed.  The best way to write the rules is as
+follows:
+
+@smallexample
+info: foo.info
+
+foo.info: foo.texi chap1.texi chap2.texi
+        $(MAKEINFO) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{MAKEINFO} in the Makefile.  It should
+run the @code{makeinfo} program, which is part of the Texinfo
+distribution.
+
+Normally a GNU distribution comes with Info files, and that means the
+Info files are present in the source directory.  Therefore, the Make
+rule for an info file should update it in the source directory.  When
+users build the package, ordinarily Make will not update the Info files
+because they will already be up to date.
+
+@item dvi
+@itemx html
+@itemx pdf
+@itemx ps
+Generate documentation files in the given format.  These targets
+should always exist, but any or all can be a no-op if the given output
+format cannot be generated.  These targets should not be dependencies
+of the @code{all} target; the user must manually invoke them.
+
+Here's an example rule for generating DVI files from Texinfo:
+
+@smallexample
+dvi: foo.dvi
+
+foo.dvi: foo.texi chap1.texi chap2.texi
+        $(TEXI2DVI) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{TEXI2DVI} in the Makefile.  It
+should run the program @code{texi2dvi}, which is part of the Texinfo
+distribution.  (@code{texi2dvi} uses @TeX{} to do the real work of
+formatting. @TeX{} is not distributed with Texinfo.)  Alternatively,
+write only the dependencies, and allow GNU @code{make} to provide the
+command.
+
+Here's another example, this one for generating HTML from Texinfo:
+
+@smallexample
+html: foo.html
+
+foo.html: foo.texi chap1.texi chap2.texi
+        $(TEXI2HTML) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+Again, you would define the variable @code{TEXI2HTML} in the Makefile;
+for example, it might run @code{makeinfo --no-split --html}
+(@command{makeinfo} is part of the Texinfo distribution).
+
+@item dist
+Create a distribution tar file for this program.  The tar file should be
+set up so that the file names in the tar file start with a subdirectory
+name which is the name of the package it is a distribution for.  This
+name can include the version number.
+
+For example, the distribution tar file of GCC version 1.40 unpacks into
+a subdirectory named @file{gcc-1.40}.
+
+The easiest way to do this is to create a subdirectory appropriately
+named, use @code{ln} or @code{cp} to install the proper files in it, and
+then @code{tar} that subdirectory.
+
+Compress the tar file with @code{gzip}.  For example, the actual
+distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
+It is ok to support other free compression formats as well.
+
+The @code{dist} target should explicitly depend on all non-source files
+that are in the distribution, to make sure they are up to date in the
+distribution.
+@ifset CODESTD
+@xref{Releases, , Making Releases}.
+@end ifset
+@ifclear CODESTD
+@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
+@end ifclear
+
+@item check
+Perform self-tests (if any).  The user must build the program before
+running the tests, but need not install the program; you should write
+the self-tests so that they work when the program is built but not
+installed.
+@end table
+
+The following targets are suggested as conventional names, for programs
+in which they are useful.
+
+@table @code
+@item installcheck
+Perform installation tests (if any).  The user must build and install
+the program before running the tests.  You should not assume that
+@file{$(bindir)} is in the search path.
+
+@item installdirs
+It's useful to add a target named @samp{installdirs} to create the
+directories where files are installed, and their parent directories.
+There is a script called @file{mkinstalldirs} which is convenient for
+this; you can find it in the Gnulib package.
+You can use a rule like this:
+
+@comment This has been carefully formatted to look decent in the Make manual.
+@comment Please be sure not to make it extend any further to the right.--roland
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+        $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
+                                $(libdir) $(infodir) \
+                                $(mandir)
+@end smallexample
+
+@noindent
+or, if you wish to support @env{DESTDIR} (strongly encouraged),
+
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+        $(srcdir)/mkinstalldirs \
+            $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \
+            $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \
+            $(DESTDIR)$(mandir)
+@end smallexample
+
+This rule should not modify the directories where compilation is done.
+It should do nothing but create installation directories.
+@end table
+
+@node Install Command Categories
+@section Install Command Categories
+
+@cindex pre-installation commands
+@cindex post-installation commands
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.
+
+Normal commands move files into their proper places, and set their
+modes.  They may not alter any files except the ones that come entirely
+from the package they belong to.
+
+Pre-installation and post-installation commands may alter other files;
+in particular, they can edit global configuration files or data bases.
+
+Pre-installation commands are typically executed before the normal
+commands, and post-installation commands are typically run after the
+normal commands.
+
+The most common use for a post-installation command is to run
+@code{install-info}.  This cannot be done with a normal command, since
+it alters a file (the Info directory) which does not come entirely and
+solely from the package being installed.  It is a post-installation
+command because it needs to be done after the normal command which
+installs the package's Info files.
+
+Most programs don't need any pre-installation commands, but we have the
+feature just in case it is needed.
+
+To classify the commands in the @code{install} rule into these three
+categories, insert @dfn{category lines} among them.  A category line
+specifies the category for the commands that follow.
+
+A category line consists of a tab and a reference to a special Make
+variable, plus an optional comment at the end.  There are three
+variables you can use, one for each category; the variable name
+specifies the category.  Category lines are no-ops in ordinary execution
+because these three Make variables are normally undefined (and you
+@emph{should not} define them in the makefile).
+
+Here are the three possible category lines, each with a comment that
+explains what it means:
+
+@smallexample
+        $(PRE_INSTALL)     # @r{Pre-install commands follow.}
+        $(POST_INSTALL)    # @r{Post-install commands follow.}
+        $(NORMAL_INSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+If you don't use a category line at the beginning of the @code{install}
+rule, all the commands are classified as normal until the first category
+line.  If you don't use any category lines, all the commands are
+classified as normal.
+
+These are the category lines for @code{uninstall}:
+
+@smallexample
+        $(PRE_UNINSTALL)     # @r{Pre-uninstall commands follow.}
+        $(POST_UNINSTALL)    # @r{Post-uninstall commands follow.}
+        $(NORMAL_UNINSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+Typically, a pre-uninstall command would be used for deleting entries
+from the Info directory.
+
+If the @code{install} or @code{uninstall} target has any dependencies
+which act as subroutines of installation, then you should start
+@emph{each} dependency's commands with a category line, and start the
+main target's commands with a category line also.  This way, you can
+ensure that each command is placed in the right category regardless of
+which of the dependencies actually run.
+
+Pre-installation and post-installation commands should not run any
+programs except for these:
+
+@example
+[ basename bash cat chgrp chmod chown cmp cp dd diff echo
+egrep expand expr false fgrep find getopt grep gunzip gzip
+hostname install install-info kill ldconfig ln ls md5sum
+mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
+test touch true uname xargs yes
+@end example
+
+@cindex binary packages
+The reason for distinguishing the commands in this way is for the sake
+of making binary packages.  Typically a binary package contains all the
+executables and other files that need to be installed, and has its own
+method of installing them---so it does not need to run the normal
+installation commands.  But installing the binary package does need to
+execute the pre-installation and post-installation commands.
+
+Programs to build binary packages work by extracting the
+pre-installation and post-installation commands.  Here is one way of
+extracting the pre-installation commands (the @option{-s} option to
+@command{make} is needed to silence messages about entering
+subdirectories):
+
+@smallexample
+make -s -n install -o all \
+      PRE_INSTALL=pre-install \
+      POST_INSTALL=post-install \
+      NORMAL_INSTALL=normal-install \
+  | gawk -f pre-install.awk
+@end smallexample
+
+@noindent
+where the file @file{pre-install.awk} could contain this:
+
+@smallexample
+$0 ~ /^(normal-install|post-install)[ \t]*$/ @{on = 0@}
+on @{print $0@}
+$0 ~ /^pre-install[ \t]*$/ @{on = 1@}
+@end smallexample
diff --git a/doc/make.info b/doc/make.info
new file mode 100644
index 0000000..7a54c1b
--- /dev/null
+++ b/doc/make.info
@@ -0,0 +1,200 @@
+This is make.info, produced by makeinfo version 5.2 from make.texi.
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.73, last updated 5 October 2014, of 'The GNU Make
+Manual', for GNU 'make' version 4.1.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* Make: (make).            Remake files automatically.
+END-INFO-DIR-ENTRY
+
+
+Indirect:
+make.info-1: 1342
+make.info-2: 305689
+
+Tag Table:
+(Indirect)
+Node: Top1342
+Node: Overview16115
+Node: Preparing17128
+Node: Reading18096
+Node: Bugs19023
+Node: Introduction20852
+Node: Rule Introduction22445
+Node: Simple Makefile24378
+Node: How Make Works28114
+Node: Variables Simplify30763
+Node: make Deduces32969
+Node: Combine By Prerequisite34702
+Node: Cleanup35731
+Node: Makefiles37149
+Node: Makefile Contents37985
+Node: Splitting Lines41158
+Node: Makefile Names42918
+Node: Include44525
+Ref: Include-Footnote-148269
+Node: MAKEFILES Variable48403
+Node: Remaking Makefiles49944
+Node: Overriding Makefiles54169
+Node: Reading Makefiles56197
+Node: Secondary Expansion59659
+Node: Rules67120
+Node: Rule Example69793
+Node: Rule Syntax70646
+Node: Prerequisite Types73241
+Node: Wildcards76108
+Node: Wildcard Examples77827
+Node: Wildcard Pitfall79177
+Node: Wildcard Function80966
+Node: Directory Search82750
+Node: General Search83885
+Node: Selective Search85592
+Node: Search Algorithm88582
+Node: Recipes/Search91100
+Node: Implicit/Search92423
+Node: Libraries/Search93365
+Node: Phony Targets95336
+Node: Force Targets100173
+Node: Empty Targets101210
+Node: Special Targets102512
+Node: Multiple Targets110385
+Node: Multiple Rules112245
+Node: Static Pattern114463
+Node: Static Usage115115
+Node: Static versus Implicit118834
+Node: Double-Colon120574
+Node: Automatic Prerequisites122334
+Node: Recipes126595
+Node: Recipe Syntax127767
+Node: Splitting Recipe Lines129882
+Node: Variables in Recipes133035
+Node: Echoing134361
+Node: Execution135636
+Ref: Execution-Footnote-1137049
+Node: One Shell137194
+Node: Choosing the Shell140509
+Node: Parallel144653
+Node: Parallel Output147322
+Node: Parallel Input151749
+Node: Errors152868
+Node: Interrupts156532
+Node: Recursion158115
+Node: MAKE Variable160212
+Node: Variables/Recursion162455
+Node: Options/Recursion167900
+Node: -w Option173918
+Node: Canned Recipes174913
+Node: Empty Recipes177896
+Node: Using Variables179044
+Node: Reference182472
+Node: Flavors184030
+Node: Advanced190009
+Node: Substitution Refs190514
+Node: Computed Names192067
+Node: Values196615
+Node: Setting197532
+Node: Appending200441
+Node: Override Directive204383
+Node: Multi-Line206010
+Node: Undefine Directive208834
+Node: Environment209923
+Node: Target-specific212175
+Node: Pattern-specific215202
+Node: Suppressing Inheritance217049
+Node: Special Variables218502
+Node: Conditionals224911
+Node: Conditional Example225624
+Node: Conditional Syntax228187
+Node: Testing Flags233944
+Node: Functions235045
+Node: Syntax of Functions236605
+Node: Text Functions238939
+Node: File Name Functions247504
+Node: Conditional Functions252730
+Node: Foreach Function255105
+Node: File Function258318
+Node: Call Function260396
+Node: Value Function263281
+Node: Eval Function264718
+Node: Origin Function266994
+Node: Flavor Function270220
+Node: Make Control Functions271264
+Node: Shell Function272950
+Node: Guile Function274583
+Node: Running275333
+Node: Makefile Arguments277314
+Node: Goals278030
+Node: Instead of Execution282769
+Node: Avoiding Compilation286484
+Node: Overriding288459
+Node: Testing290771
+Node: Options Summary292655
+Node: Implicit Rules305689
+Node: Using Implicit307826
+Node: Catalogue of Rules311345
+Node: Implicit Variables320689
+Node: Chained Rules325762
+Node: Pattern Rules329772
+Node: Pattern Intro331306
+Node: Pattern Examples333888
+Node: Automatic Variables335695
+Node: Pattern Match343045
+Node: Match-Anything Rules346368
+Node: Canceling Rules350247
+Node: Last Resort350961
+Node: Suffix Rules352790
+Node: Implicit Rule Search356515
+Node: Archives360014
+Node: Archive Members360719
+Node: Archive Update362329
+Node: Archive Symbols364240
+Node: Archive Pitfalls365473
+Node: Archive Suffix Rules366195
+Node: Extending make367743
+Node: Guile Integration368880
+Node: Guile Types370108
+Node: Guile Interface372528
+Node: Guile Example373814
+Node: Loading Objects376005
+Node: load Directive377495
+Node: Remaking Loaded Objects380249
+Node: Loaded Object API380883
+Node: Loaded Object Example387645
+Node: Features389892
+Node: Missing399059
+Node: Makefile Conventions402784
+Node: Makefile Basics403763
+Node: Utilities in Makefiles406930
+Node: Command Variables409429
+Node: DESTDIR412669
+Node: Directory Variables414836
+Node: Standard Targets430192
+Node: Install Command Categories444298
+Node: Quick Reference448824
+Node: Error Messages461529
+Node: Complex Makefile469425
+Node: GNU Free Documentation License478043
+Node: Concept Index503185
+Node: Name Index573971
+
+End Tag Table
diff --git a/doc/make.info-1 b/doc/make.info-1
new file mode 100644
index 0000000..2a1a922
--- /dev/null
+++ b/doc/make.info-1
@@ -0,0 +1,7316 @@
+This is make.info, produced by makeinfo version 5.2 from make.texi.
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.73, last updated 5 October 2014, of 'The GNU Make
+Manual', for GNU 'make' version 4.1.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* Make: (make).            Remake files automatically.
+END-INFO-DIR-ENTRY
+
+
+File: make.info,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)
+
+GNU 'make'
+**********
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.73, last updated 5 October 2014, of 'The GNU Make
+Manual', for GNU 'make' version 4.1.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+
+* Menu:
+
+* Overview::                    Overview of 'make'.
+* Introduction::                An introduction to 'make'.
+* Makefiles::                   Makefiles tell 'make' what to do.
+* Rules::                       Rules describe when a file must be remade.
+* Recipes::                     Recipes say how to remake a file.
+* Using Variables::             You can use variables to avoid repetition.
+* Conditionals::                Use or ignore parts of the makefile based
+                                  on the values of variables.
+* Functions::                   Many powerful ways to manipulate text.
+* Invoking make: Running.       How to invoke 'make' on the command line.
+* Implicit Rules::              Use implicit rules to treat many files alike,
+                                  based on their file names.
+* Archives::                    How 'make' can update library archives.
+* Extending make::              Using extensions to 'make'.
+* Features::                    Features GNU 'make' has over other 'make's.
+* Missing::                     What GNU 'make' lacks from other 'make's.
+* Makefile Conventions::        Conventions for writing makefiles for
+                                  GNU programs.
+* Quick Reference::             A quick reference for experienced users.
+* Error Messages::              A list of common errors generated by 'make'.
+* Complex Makefile::            A real example of a straightforward,
+                                  but nontrivial, makefile.
+
+* GNU Free Documentation License::  License for copying this manual.
+* Concept Index::               Index of Concepts.
+* Name Index::                  Index of Functions, Variables, & Directives.
+
+ -- The Detailed Node Listing --
+
+Overview of 'make'
+
+* Preparing::                   Preparing and running 'make'.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+
+An Introduction to Makefiles
+
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How 'make' processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting 'make' deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+
+Writing Makefiles
+
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+
+What Makefiles Contain
+
+* Splitting Lines::             Splitting long lines in makefiles
+
+Writing Rules
+
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as '*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+
+Using Wildcard Characters in File Names
+
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+
+Searching Directories for Prerequisites
+
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+
+Static Pattern Rules
+
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+
+Writing Recipes in Rules
+
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking 'make' from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+
+Recipe Syntax
+
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using 'make' variables in recipes.
+
+Recipe Execution
+
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How 'make' chooses the shell used
+                                  to run recipes.
+
+Parallel Execution
+
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+
+Recursive Use of 'make'
+
+* MAKE Variable::               The special effects of using '$(MAKE)'.
+* Variables/Recursion::         How to communicate variables to a sub-'make'.
+* Options/Recursion::           How to communicate options to a sub-'make'.
+* -w Option::                   How the '-w' or '--print-directory' option
+                                  helps debug use of recursive 'make' commands.
+
+How to Use Variables
+
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+
+Advanced Features for Reference to Variables
+
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+
+Conditional Parts of Makefiles
+
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+
+Functions for Transforming Text
+
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+
+How to Run 'make'
+
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+
+Using Implicit Rules
+
+* Using Implicit::              How to use an existing implicit rule
+                                  to get the recipes for updating a file.
+* Catalogue of Rules::          A list of built-in rules.
+* Implicit Variables::          How to change what predefined rules do.
+* Chained Rules::               How to use a chain of implicit rules.
+* Pattern Rules::               How to define new implicit rules.
+* Last Resort::                 How to define a recipe for rules which
+                                  cannot find any.
+* Suffix Rules::                The old-fashioned style of implicit rule.
+* Implicit Rule Search::        The precise algorithm for applying
+                                  implicit rules.
+
+Defining and Redefining Pattern Rules
+
+* Pattern Intro::               An introduction to pattern rules.
+* Pattern Examples::            Examples of pattern rules.
+* Automatic Variables::         How to use automatic variables in the
+                                  recipe of implicit rules.
+* Pattern Match::               How patterns match.
+* Match-Anything Rules::        Precautions you should take prior to
+                                  defining rules that can match any
+                                  target file whatever.
+* Canceling Rules::             How to override or cancel built-in rules.
+
+Using 'make' to Update Archive Files
+
+* Archive Members::             Archive members as targets.
+* Archive Update::              The implicit rule for archive member targets.
+* Archive Pitfalls::            Dangers to watch out for when using archives.
+* Archive Suffix Rules::        You can write a special kind of suffix rule
+                                  for updating archives.
+
+Implicit Rule for Archive Member Targets
+
+* Archive Symbols::             How to update archive symbol directories.
+
+Extending GNU 'make'
+
+* Guile Integration::           Using Guile as an embedded scripting language.
+* Loading Objects::             Loading dynamic objects as extensions.
+
+GNU Guile Integration
+
+* Guile Types::                 Converting Guile types to 'make' strings.
+* Guile Interface::             Invoking 'make' functions from Guile.
+* Guile Example::               Example using Guile in 'make'.
+
+Loading Dynamic Objects
+
+* load Directive::              Loading dynamic objects as extensions.
+* Remaking Loaded Objects::     How loaded objects get remade.
+* Loaded Object API::           Programmatic interface for loaded objects.
+* Loaded Object Example::       Example of a loaded object
+
+
+
+File: make.info,  Node: Overview,  Next: Introduction,  Prev: Top,  Up: Top
+
+1 Overview of 'make'
+********************
+
+The 'make' utility automatically determines which pieces of a large
+program need to be recompiled, and issues commands to recompile them.
+This manual describes GNU 'make', which was implemented by Richard
+Stallman and Roland McGrath.  Development since Version 3.76 has been
+handled by Paul D. Smith.
+
+   GNU 'make' conforms to section 6.2 of 'IEEE Standard 1003.2-1992'
+(POSIX.2).
+
+   Our examples show C programs, since they are most common, but you can
+use 'make' with any programming language whose compiler can be run with
+a shell command.  Indeed, 'make' is not limited to programs.  You can
+use it to describe any task where some files must be updated
+automatically from others whenever the others change.
+
+* Menu:
+
+* Preparing::                   Preparing and running 'make'.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+
+
+File: make.info,  Node: Preparing,  Next: Reading,  Prev: Overview,  Up: Overview
+
+Preparing and Running Make
+==========================
+
+To prepare to use 'make', you must write a file called the "makefile"
+that describes the relationships among files in your program and
+provides commands for updating each file.  In a program, typically, the
+executable file is updated from object files, which are in turn made by
+compiling source files.
+
+   Once a suitable makefile exists, each time you change some source
+files, this simple shell command:
+
+     make
+
+suffices to perform all necessary recompilations.  The 'make' program
+uses the makefile data base and the last-modification times of the files
+to decide which of the files need to be updated.  For each of those
+files, it issues the recipes recorded in the data base.
+
+   You can provide command line arguments to 'make' to control which
+files should be recompiled, or how.  *Note How to Run 'make': Running.
+
+
+File: make.info,  Node: Reading,  Next: Bugs,  Prev: Preparing,  Up: Overview
+
+1.1 How to Read This Manual
+===========================
+
+If you are new to 'make', or are looking for a general introduction,
+read the first few sections of each chapter, skipping the later
+sections.  In each chapter, the first few sections contain introductory
+or general information and the later sections contain specialized or
+technical information.  The exception is the second chapter, *note An
+Introduction to Makefiles: Introduction, all of which is introductory.
+
+   If you are familiar with other 'make' programs, see *note Features of
+GNU 'make': Features, which lists the enhancements GNU 'make' has, and
+*note Incompatibilities and Missing Features: Missing, which explains
+the few things GNU 'make' lacks that others have.
+
+   For a quick summary, see *note Options Summary::, *note Quick
+Reference::, and *note Special Targets::.
+
+
+File: make.info,  Node: Bugs,  Prev: Reading,  Up: Overview
+
+1.2 Problems and Bugs
+=====================
+
+If you have problems with GNU 'make' or think you've found a bug, please
+report it to the developers; we cannot promise to do anything but we
+might well want to fix it.
+
+   Before reporting a bug, make sure you've actually found a real bug.
+Carefully reread the documentation and see if it really says you can do
+what you're trying to do.  If it's not clear whether you should be able
+to do something or not, report that too; it's a bug in the
+documentation!
+
+   Before reporting a bug or trying to fix it yourself, try to isolate
+it to the smallest possible makefile that reproduces the problem.  Then
+send us the makefile and the exact results 'make' gave you, including
+any error or warning messages.  Please don't paraphrase these messages:
+it's best to cut and paste them into your report.  When generating this
+small makefile, be sure to not use any non-free or unusual tools in your
+recipes: you can almost always emulate what such a tool would do with
+simple shell commands.  Finally, be sure to explain what you expected to
+occur; this will help us decide whether the problem was really in the
+documentation.
+
+   Once you have a precise problem you can report it in one of two ways.
+Either send electronic mail to:
+
+         bug-make@gnu.org
+
+or use our Web-based project management tool, at:
+
+         http://savannah.gnu.org/projects/make/
+
+In addition to the information above, please be careful to include the
+version number of 'make' you are using.  You can get this information
+with the command 'make --version'.  Be sure also to include the type of
+machine and operating system you are using.  One way to obtain this
+information is by looking at the final lines of output from the command
+'make --help'.
+
+
+File: make.info,  Node: Introduction,  Next: Makefiles,  Prev: Overview,  Up: Top
+
+2 An Introduction to Makefiles
+******************************
+
+You need a file called a "makefile" to tell 'make' what to do.  Most
+often, the makefile tells 'make' how to compile and link a program.
+
+   In this chapter, we will discuss a simple makefile that describes how
+to compile and link a text editor which consists of eight C source files
+and three header files.  The makefile can also tell 'make' how to run
+miscellaneous commands when explicitly asked (for example, to remove
+certain files as a clean-up operation).  To see a more complex example
+of a makefile, see *note Complex Makefile::.
+
+   When 'make' recompiles the editor, each changed C source file must be
+recompiled.  If a header file has changed, each C source file that
+includes the header file must be recompiled to be safe.  Each
+compilation produces an object file corresponding to the source file.
+Finally, if any source file has been recompiled, all the object files,
+whether newly made or saved from previous compilations, must be linked
+together to produce the new executable editor.
+
+* Menu:
+
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How 'make' processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting 'make' deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+
+
+File: make.info,  Node: Rule Introduction,  Next: Simple Makefile,  Prev: Introduction,  Up: Introduction
+
+2.1 What a Rule Looks Like
+==========================
+
+A simple makefile consists of "rules" with the following shape:
+
+     TARGET ... : PREREQUISITES ...
+             RECIPE
+             ...
+             ...
+
+   A "target" is usually the name of a file that is generated by a
+program; examples of targets are executable or object files.  A target
+can also be the name of an action to carry out, such as 'clean' (*note
+Phony Targets::).
+
+   A "prerequisite" is a file that is used as input to create the
+target.  A target often depends on several files.
+
+   A "recipe" is an action that 'make' carries out.  A recipe may have
+more than one command, either on the same line or each on its own line.
+*Please note:* you need to put a tab character at the beginning of every
+recipe line!  This is an obscurity that catches the unwary.  If you
+prefer to prefix your recipes with a character other than tab, you can
+set the '.RECIPEPREFIX' variable to an alternate character (*note
+Special Variables::).
+
+   Usually a recipe is in a rule with prerequisites and serves to create
+a target file if any of the prerequisites change.  However, the rule
+that specifies a recipe for the target need not have prerequisites.  For
+example, the rule containing the delete command associated with the
+target 'clean' does not have prerequisites.
+
+   A "rule", then, explains how and when to remake certain files which
+are the targets of the particular rule.  'make' carries out the recipe
+on the prerequisites to create or update the target.  A rule can also
+explain how and when to carry out an action.  *Note Writing Rules:
+Rules.
+
+   A makefile may contain other text besides rules, but a simple
+makefile need only contain rules.  Rules may look somewhat more
+complicated than shown in this template, but all fit the pattern more or
+less.
+
+
+File: make.info,  Node: Simple Makefile,  Next: How Make Works,  Prev: Rule Introduction,  Up: Introduction
+
+2.2 A Simple Makefile
+=====================
+
+Here is a straightforward makefile that describes the way an executable
+file called 'edit' depends on eight object files which, in turn, depend
+on eight C source and three header files.
+
+   In this example, all the C files include 'defs.h', but only those
+defining editing commands include 'command.h', and only low level files
+that change the editor buffer include 'buffer.h'.
+
+     edit : main.o kbd.o command.o display.o \
+            insert.o search.o files.o utils.o
+             cc -o edit main.o kbd.o command.o display.o \
+                        insert.o search.o files.o utils.o
+
+     main.o : main.c defs.h
+             cc -c main.c
+     kbd.o : kbd.c defs.h command.h
+             cc -c kbd.c
+     command.o : command.c defs.h command.h
+             cc -c command.c
+     display.o : display.c defs.h buffer.h
+             cc -c display.c
+     insert.o : insert.c defs.h buffer.h
+             cc -c insert.c
+     search.o : search.c defs.h buffer.h
+             cc -c search.c
+     files.o : files.c defs.h buffer.h command.h
+             cc -c files.c
+     utils.o : utils.c defs.h
+             cc -c utils.c
+     clean :
+             rm edit main.o kbd.o command.o display.o \
+                insert.o search.o files.o utils.o
+
+We split each long line into two lines using backslash/newline; this is
+like using one long line, but is easier to read.  *Note Splitting Long
+Lines: Splitting Lines.
+
+   To use this makefile to create the executable file called 'edit',
+type:
+
+     make
+
+   To use this makefile to delete the executable file and all the object
+files from the directory, type:
+
+     make clean
+
+   In the example makefile, the targets include the executable file
+'edit', and the object files 'main.o' and 'kbd.o'.  The prerequisites
+are files such as 'main.c' and 'defs.h'.  In fact, each '.o' file is
+both a target and a prerequisite.  Recipes include 'cc -c main.c' and
+'cc -c kbd.c'.
+
+   When a target is a file, it needs to be recompiled or relinked if any
+of its prerequisites change.  In addition, any prerequisites that are
+themselves automatically generated should be updated first.  In this
+example, 'edit' depends on each of the eight object files; the object
+file 'main.o' depends on the source file 'main.c' and on the header file
+'defs.h'.
+
+   A recipe may follow each line that contains a target and
+prerequisites.  These recipes say how to update the target file.  A tab
+character (or whatever character is specified by the '.RECIPEPREFIX'
+variable; *note Special Variables::) must come at the beginning of every
+line in the recipe to distinguish recipes from other lines in the
+makefile.  (Bear in mind that 'make' does not know anything about how
+the recipes work.  It is up to you to supply recipes that will update
+the target file properly.  All 'make' does is execute the recipe you
+have specified when the target file needs to be updated.)
+
+   The target 'clean' is not a file, but merely the name of an action.
+Since you normally do not want to carry out the actions in this rule,
+'clean' is not a prerequisite of any other rule.  Consequently, 'make'
+never does anything with it unless you tell it specifically.  Note that
+this rule not only is not a prerequisite, it also does not have any
+prerequisites, so the only purpose of the rule is to run the specified
+recipe.  Targets that do not refer to files but are just actions are
+called "phony targets".  *Note Phony Targets::, for information about
+this kind of target.  *Note Errors in Recipes: Errors, to see how to
+cause 'make' to ignore errors from 'rm' or any other command.
+
+
+File: make.info,  Node: How Make Works,  Next: Variables Simplify,  Prev: Simple Makefile,  Up: Introduction
+
+2.3 How 'make' Processes a Makefile
+===================================
+
+By default, 'make' starts with the first target (not targets whose names
+start with '.').  This is called the "default goal".  ("Goals" are the
+targets that 'make' strives ultimately to update.  You can override this
+behavior using the command line (*note Arguments to Specify the Goals:
+Goals.) or with the '.DEFAULT_GOAL' special variable (*note Other
+Special Variables: Special Variables.).
+
+   In the simple example of the previous section, the default goal is to
+update the executable program 'edit'; therefore, we put that rule first.
+
+   Thus, when you give the command:
+
+     make
+
+'make' reads the makefile in the current directory and begins by
+processing the first rule.  In the example, this rule is for relinking
+'edit'; but before 'make' can fully process this rule, it must process
+the rules for the files that 'edit' depends on, which in this case are
+the object files.  Each of these files is processed according to its own
+rule.  These rules say to update each '.o' file by compiling its source
+file.  The recompilation must be done if the source file, or any of the
+header files named as prerequisites, is more recent than the object
+file, or if the object file does not exist.
+
+   The other rules are processed because their targets appear as
+prerequisites of the goal.  If some other rule is not depended on by the
+goal (or anything it depends on, etc.), that rule is not processed,
+unless you tell 'make' to do so (with a command such as 'make clean').
+
+   Before recompiling an object file, 'make' considers updating its
+prerequisites, the source file and header files.  This makefile does not
+specify anything to be done for them--the '.c' and '.h' files are not
+the targets of any rules--so 'make' does nothing for these files.  But
+'make' would update automatically generated C programs, such as those
+made by Bison or Yacc, by their own rules at this time.
+
+   After recompiling whichever object files need it, 'make' decides
+whether to relink 'edit'.  This must be done if the file 'edit' does not
+exist, or if any of the object files are newer than it.  If an object
+file was just recompiled, it is now newer than 'edit', so 'edit' is
+relinked.
+
+   Thus, if we change the file 'insert.c' and run 'make', 'make' will
+compile that file to update 'insert.o', and then link 'edit'.  If we
+change the file 'command.h' and run 'make', 'make' will recompile the
+object files 'kbd.o', 'command.o' and 'files.o' and then link the file
+'edit'.
+
+
+File: make.info,  Node: Variables Simplify,  Next: make Deduces,  Prev: How Make Works,  Up: Introduction
+
+2.4 Variables Make Makefiles Simpler
+====================================
+
+In our example, we had to list all the object files twice in the rule
+for 'edit' (repeated here):
+
+     edit : main.o kbd.o command.o display.o \
+                   insert.o search.o files.o utils.o
+             cc -o edit main.o kbd.o command.o display.o \
+                        insert.o search.o files.o utils.o
+
+   Such duplication is error-prone; if a new object file is added to the
+system, we might add it to one list and forget the other.  We can
+eliminate the risk and simplify the makefile by using a variable.
+"Variables" allow a text string to be defined once and substituted in
+multiple places later (*note How to Use Variables: Using Variables.).
+
+   It is standard practice for every makefile to have a variable named
+'objects', 'OBJECTS', 'objs', 'OBJS', 'obj', or 'OBJ' which is a list of
+all object file names.  We would define such a variable 'objects' with a
+line like this in the makefile:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+Then, each place we want to put a list of the object file names, we can
+substitute the variable's value by writing '$(objects)' (*note How to
+Use Variables: Using Variables.).
+
+   Here is how the complete simple makefile looks when you use a
+variable for the object files:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+     main.o : main.c defs.h
+             cc -c main.c
+     kbd.o : kbd.c defs.h command.h
+             cc -c kbd.c
+     command.o : command.c defs.h command.h
+             cc -c command.c
+     display.o : display.c defs.h buffer.h
+             cc -c display.c
+     insert.o : insert.c defs.h buffer.h
+             cc -c insert.c
+     search.o : search.c defs.h buffer.h
+             cc -c search.c
+     files.o : files.c defs.h buffer.h command.h
+             cc -c files.c
+     utils.o : utils.c defs.h
+             cc -c utils.c
+     clean :
+             rm edit $(objects)
+
+
+File: make.info,  Node: make Deduces,  Next: Combine By Prerequisite,  Prev: Variables Simplify,  Up: Introduction
+
+2.5 Letting 'make' Deduce the Recipes
+=====================================
+
+It is not necessary to spell out the recipes for compiling the
+individual C source files, because 'make' can figure them out: it has an
+"implicit rule" for updating a '.o' file from a correspondingly named
+'.c' file using a 'cc -c' command.  For example, it will use the recipe
+'cc -c main.c -o main.o' to compile 'main.c' into 'main.o'.  We can
+therefore omit the recipes from the rules for the object files.  *Note
+Using Implicit Rules: Implicit Rules.
+
+   When a '.c' file is used automatically in this way, it is also
+automatically added to the list of prerequisites.  We can therefore omit
+the '.c' files from the prerequisites, provided we omit the recipe.
+
+   Here is the entire example, with both of these changes, and a
+variable 'objects' as suggested above:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+
+     main.o : defs.h
+     kbd.o : defs.h command.h
+     command.o : defs.h command.h
+     display.o : defs.h buffer.h
+     insert.o : defs.h buffer.h
+     search.o : defs.h buffer.h
+     files.o : defs.h buffer.h command.h
+     utils.o : defs.h
+
+     .PHONY : clean
+     clean :
+             rm edit $(objects)
+
+This is how we would write the makefile in actual practice.  (The
+complications associated with 'clean' are described elsewhere.  See
+*note Phony Targets::, and *note Errors in Recipes: Errors.)
+
+   Because implicit rules are so convenient, they are important.  You
+will see them used frequently.
+
+
+File: make.info,  Node: Combine By Prerequisite,  Next: Cleanup,  Prev: make Deduces,  Up: Introduction
+
+2.6 Another Style of Makefile
+=============================
+
+When the objects of a makefile are created only by implicit rules, an
+alternative style of makefile is possible.  In this style of makefile,
+you group entries by their prerequisites instead of by their targets.
+Here is what one looks like:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+
+     $(objects) : defs.h
+     kbd.o command.o files.o : command.h
+     display.o insert.o search.o files.o : buffer.h
+
+Here 'defs.h' is given as a prerequisite of all the object files;
+'command.h' and 'buffer.h' are prerequisites of the specific object
+files listed for them.
+
+   Whether this is better is a matter of taste: it is more compact, but
+some people dislike it because they find it clearer to put all the
+information about each target in one place.
+
+
+File: make.info,  Node: Cleanup,  Prev: Combine By Prerequisite,  Up: Introduction
+
+2.7 Rules for Cleaning the Directory
+====================================
+
+Compiling a program is not the only thing you might want to write rules
+for.  Makefiles commonly tell how to do a few other things besides
+compiling a program: for example, how to delete all the object files and
+executables so that the directory is 'clean'.
+
+   Here is how we could write a 'make' rule for cleaning our example
+editor:
+
+     clean:
+             rm edit $(objects)
+
+   In practice, we might want to write the rule in a somewhat more
+complicated manner to handle unanticipated situations.  We would do
+this:
+
+     .PHONY : clean
+     clean :
+             -rm edit $(objects)
+
+This prevents 'make' from getting confused by an actual file called
+'clean' and causes it to continue in spite of errors from 'rm'.  (See
+*note Phony Targets::, and *note Errors in Recipes: Errors.)
+
+A rule such as this should not be placed at the beginning of the
+makefile, because we do not want it to run by default!  Thus, in the
+example makefile, we want the rule for 'edit', which recompiles the
+editor, to remain the default goal.
+
+   Since 'clean' is not a prerequisite of 'edit', this rule will not run
+at all if we give the command 'make' with no arguments.  In order to
+make the rule run, we have to type 'make clean'.  *Note How to Run
+'make': Running.
+
+
+File: make.info,  Node: Makefiles,  Next: Rules,  Prev: Introduction,  Up: Top
+
+3 Writing Makefiles
+*******************
+
+The information that tells 'make' how to recompile a system comes from
+reading a data base called the "makefile".
+
+* Menu:
+
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+
+
+File: make.info,  Node: Makefile Contents,  Next: Makefile Names,  Prev: Makefiles,  Up: Makefiles
+
+3.1 What Makefiles Contain
+==========================
+
+Makefiles contain five kinds of things: "explicit rules", "implicit
+rules", "variable definitions", "directives", and "comments".  Rules,
+variables, and directives are described at length in later chapters.
+
+   * An "explicit rule" says when and how to remake one or more files,
+     called the rule's "targets".  It lists the other files that the
+     targets depend on, called the "prerequisites" of the target, and
+     may also give a recipe to use to create or update the targets.
+     *Note Writing Rules: Rules.
+
+   * An "implicit rule" says when and how to remake a class of files
+     based on their names.  It describes how a target may depend on a
+     file with a name similar to the target and gives a recipe to create
+     or update such a target.  *Note Using Implicit Rules: Implicit
+     Rules.
+
+   * A "variable definition" is a line that specifies a text string
+     value for a variable that can be substituted into the text later.
+     The simple makefile example shows a variable definition for
+     'objects' as a list of all object files (*note Variables Make
+     Makefiles Simpler: Variables Simplify.).
+
+   * A "directive" is an instruction for 'make' to do something special
+     while reading the makefile.  These include:
+
+        * Reading another makefile (*note Including Other Makefiles:
+          Include.).
+
+        * Deciding (based on the values of variables) whether to use or
+          ignore a part of the makefile (*note Conditional Parts of
+          Makefiles: Conditionals.).
+
+        * Defining a variable from a verbatim string containing multiple
+          lines (*note Defining Multi-Line Variables: Multi-Line.).
+
+   * '#' in a line of a makefile starts a "comment".  It and the rest of
+     the line are ignored, except that a trailing backslash not escaped
+     by another backslash will continue the comment across multiple
+     lines.  A line containing just a comment (with perhaps spaces
+     before it) is effectively blank, and is ignored.  If you want a
+     literal '#', escape it with a backslash (e.g., '\#').  Comments may
+     appear on any line in the makefile, although they are treated
+     specially in certain situations.
+
+     You cannot use comments within variable references or function
+     calls: any instance of '#' will be treated literally (rather than
+     as the start of a comment) inside a variable reference or function
+     call.
+
+     Comments within a recipe are passed to the shell, just as with any
+     other recipe text.  The shell decides how to interpret it: whether
+     or not this is a comment is up to the shell.
+
+     Within a 'define' directive, comments are not ignored during the
+     definition of the variable, but rather kept intact in the value of
+     the variable.  When the variable is expanded they will either be
+     treated as 'make' comments or as recipe text, depending on the
+     context in which the variable is evaluated.
+
+* Menu:
+
+* Splitting Lines::             Splitting long lines in makefiles
+
+
+File: make.info,  Node: Splitting Lines,  Prev: Makefile Contents,  Up: Makefile Contents
+
+3.1.1 Splitting Long Lines
+--------------------------
+
+Makefiles use a "line-based" syntax in which the newline character is
+special and marks the end of a statement.  GNU 'make' has no limit on
+the length of a statement line, up to the amount of memory in your
+computer.
+
+   However, it is difficult to read lines which are too long to display
+without wrapping or scrolling.  So, you can format your makefiles for
+readability by adding newlines into the middle of a statement: you do
+this by escaping the internal newlines with a backslash ('\') character.
+Where we need to make a distinction we will refer to "physical lines" as
+a single line ending with a newline (regardless of whether it is
+escaped) and a "logical line" being a complete statement including all
+escaped newlines up to the first non-escaped newline.
+
+   The way in which backslash/newline combinations are handled depends
+on whether the statement is a recipe line or a non-recipe line.
+Handling of backslash/newline in a recipe line is discussed later (*note
+Splitting Recipe Lines::).
+
+   Outside of recipe lines, backslash/newlines are converted into a
+single space character.  Once that is done, all whitespace around the
+backslash/newline is condensed into a single space: this includes all
+whitespace preceding the backslash, all whitespace at the beginning of
+the line after the backslash/newline, and any consecutive
+backslash/newline combinations.
+
+   If the '.POSIX' special target is defined then backslash/newline
+handling is modified slightly to conform to POSIX.2: first, whitespace
+preceding a backslash is not removed and second, consecutive
+backslash/newlines are not condensed.
+
+
+File: make.info,  Node: Makefile Names,  Next: Include,  Prev: Makefile Contents,  Up: Makefiles
+
+3.2 What Name to Give Your Makefile
+===================================
+
+By default, when 'make' looks for the makefile, it tries the following
+names, in order: 'GNUmakefile', 'makefile' and 'Makefile'.
+
+   Normally you should call your makefile either 'makefile' or
+'Makefile'.  (We recommend 'Makefile' because it appears prominently
+near the beginning of a directory listing, right near other important
+files such as 'README'.)  The first name checked, 'GNUmakefile', is not
+recommended for most makefiles.  You should use this name if you have a
+makefile that is specific to GNU 'make', and will not be understood by
+other versions of 'make'.  Other 'make' programs look for 'makefile' and
+'Makefile', but not 'GNUmakefile'.
+
+   If 'make' finds none of these names, it does not use any makefile.
+Then you must specify a goal with a command argument, and 'make' will
+attempt to figure out how to remake it using only its built-in implicit
+rules.  *Note Using Implicit Rules: Implicit Rules.
+
+   If you want to use a nonstandard name for your makefile, you can
+specify the makefile name with the '-f' or '--file' option.  The
+arguments '-f NAME' or '--file=NAME' tell 'make' to read the file NAME
+as the makefile.  If you use more than one '-f' or '--file' option, you
+can specify several makefiles.  All the makefiles are effectively
+concatenated in the order specified.  The default makefile names
+'GNUmakefile', 'makefile' and 'Makefile' are not checked automatically
+if you specify '-f' or '--file'.
+
+
+File: make.info,  Node: Include,  Next: MAKEFILES Variable,  Prev: Makefile Names,  Up: Makefiles
+
+3.3 Including Other Makefiles
+=============================
+
+The 'include' directive tells 'make' to suspend reading the current
+makefile and read one or more other makefiles before continuing.  The
+directive is a line in the makefile that looks like this:
+
+     include FILENAMES...
+
+FILENAMES can contain shell file name patterns.  If FILENAMES is empty,
+nothing is included and no error is printed.
+
+   Extra spaces are allowed and ignored at the beginning of the line,
+but the first character must not be a tab (or the value of
+'.RECIPEPREFIX')--if the line begins with a tab, it will be considered a
+recipe line.  Whitespace is required between 'include' and the file
+names, and between file names; extra whitespace is ignored there and at
+the end of the directive.  A comment starting with '#' is allowed at the
+end of the line.  If the file names contain any variable or function
+references, they are expanded.  *Note How to Use Variables: Using
+Variables.
+
+   For example, if you have three '.mk' files, 'a.mk', 'b.mk', and
+'c.mk', and '$(bar)' expands to 'bish bash', then the following
+expression
+
+     include foo *.mk $(bar)
+
+   is equivalent to
+
+     include foo a.mk b.mk c.mk bish bash
+
+   When 'make' processes an 'include' directive, it suspends reading of
+the containing makefile and reads from each listed file in turn.  When
+that is finished, 'make' resumes reading the makefile in which the
+directive appears.
+
+   One occasion for using 'include' directives is when several programs,
+handled by individual makefiles in various directories, need to use a
+common set of variable definitions (*note Setting Variables: Setting.)
+or pattern rules (*note Defining and Redefining Pattern Rules: Pattern
+Rules.).
+
+   Another such occasion is when you want to generate prerequisites from
+source files automatically; the prerequisites can be put in a file that
+is included by the main makefile.  This practice is generally cleaner
+than that of somehow appending the prerequisites to the end of the main
+makefile as has been traditionally done with other versions of 'make'.
+*Note Automatic Prerequisites::.
+
+   If the specified name does not start with a slash, and the file is
+not found in the current directory, several other directories are
+searched.  First, any directories you have specified with the '-I' or
+'--include-dir' option are searched (*note Summary of Options: Options
+Summary.).  Then the following directories (if they exist) are searched,
+in this order: 'PREFIX/include' (normally '/usr/local/include' (1))
+'/usr/gnu/include', '/usr/local/include', '/usr/include'.
+
+   If an included makefile cannot be found in any of these directories,
+a warning message is generated, but it is not an immediately fatal
+error; processing of the makefile containing the 'include' continues.
+Once it has finished reading makefiles, 'make' will try to remake any
+that are out of date or don't exist.  *Note How Makefiles Are Remade:
+Remaking Makefiles.  Only after it has tried to find a way to remake a
+makefile and failed, will 'make' diagnose the missing makefile as a
+fatal error.
+
+   If you want 'make' to simply ignore a makefile which does not exist
+or cannot be remade, with no error message, use the '-include' directive
+instead of 'include', like this:
+
+     -include FILENAMES...
+
+   This acts like 'include' in every way except that there is no error
+(not even a warning) if any of the FILENAMES (or any prerequisites of
+any of the FILENAMES) do not exist or cannot be remade.
+
+   For compatibility with some other 'make' implementations, 'sinclude'
+is another name for '-include'.
+
+   ---------- Footnotes ----------
+
+   (1) GNU Make compiled for MS-DOS and MS-Windows behaves as if PREFIX
+has been defined to be the root of the DJGPP tree hierarchy.
+
+
+File: make.info,  Node: MAKEFILES Variable,  Next: Remaking Makefiles,  Prev: Include,  Up: Makefiles
+
+3.4 The Variable 'MAKEFILES'
+============================
+
+If the environment variable 'MAKEFILES' is defined, 'make' considers its
+value as a list of names (separated by whitespace) of additional
+makefiles to be read before the others.  This works much like the
+'include' directive: various directories are searched for those files
+(*note Including Other Makefiles: Include.).  In addition, the default
+goal is never taken from one of these makefiles (or any makefile
+included by them) and it is not an error if the files listed in
+'MAKEFILES' are not found.
+
+   The main use of 'MAKEFILES' is in communication between recursive
+invocations of 'make' (*note Recursive Use of 'make': Recursion.).  It
+usually is not desirable to set the environment variable before a
+top-level invocation of 'make', because it is usually better not to mess
+with a makefile from outside.  However, if you are running 'make'
+without a specific makefile, a makefile in 'MAKEFILES' can do useful
+things to help the built-in implicit rules work better, such as defining
+search paths (*note Directory Search::).
+
+   Some users are tempted to set 'MAKEFILES' in the environment
+automatically on login, and program makefiles to expect this to be done.
+This is a very bad idea, because such makefiles will fail to work if run
+by anyone else.  It is much better to write explicit 'include'
+directives in the makefiles.  *Note Including Other Makefiles: Include.
+
+
+File: make.info,  Node: Remaking Makefiles,  Next: Overriding Makefiles,  Prev: MAKEFILES Variable,  Up: Makefiles
+
+3.5 How Makefiles Are Remade
+============================
+
+Sometimes makefiles can be remade from other files, such as RCS or SCCS
+files.  If a makefile can be remade from other files, you probably want
+'make' to get an up-to-date version of the makefile to read in.
+
+   To this end, after reading in all makefiles, 'make' will consider
+each as a goal target and attempt to update it.  If a makefile has a
+rule which says how to update it (found either in that very makefile or
+in another one) or if an implicit rule applies to it (*note Using
+Implicit Rules: Implicit Rules.), it will be updated if necessary.
+After all makefiles have been checked, if any have actually been
+changed, 'make' starts with a clean slate and reads all the makefiles
+over again.  (It will also attempt to update each of them over again,
+but normally this will not change them again, since they are already up
+to date.)
+
+   If you know that one or more of your makefiles cannot be remade and
+you want to keep 'make' from performing an implicit rule search on them,
+perhaps for efficiency reasons, you can use any normal method of
+preventing implicit rule look-up to do so.  For example, you can write
+an explicit rule with the makefile as the target, and an empty recipe
+(*note Using Empty Recipes: Empty Recipes.).
+
+   If the makefiles specify a double-colon rule to remake a file with a
+recipe but no prerequisites, that file will always be remade (*note
+Double-Colon::).  In the case of makefiles, a makefile that has a
+double-colon rule with a recipe but no prerequisites will be remade
+every time 'make' is run, and then again after 'make' starts over and
+reads the makefiles in again.  This would cause an infinite loop: 'make'
+would constantly remake the makefile, and never do anything else.  So,
+to avoid this, 'make' will *not* attempt to remake makefiles which are
+specified as targets of a double-colon rule with a recipe but no
+prerequisites.
+
+   If you do not specify any makefiles to be read with '-f' or '--file'
+options, 'make' will try the default makefile names; *note What Name to
+Give Your Makefile: Makefile Names.  Unlike makefiles explicitly
+requested with '-f' or '--file' options, 'make' is not certain that
+these makefiles should exist.  However, if a default makefile does not
+exist but can be created by running 'make' rules, you probably want the
+rules to be run so that the makefile can be used.
+
+   Therefore, if none of the default makefiles exists, 'make' will try
+to make each of them in the same order in which they are searched for
+(*note What Name to Give Your Makefile: Makefile Names.) until it
+succeeds in making one, or it runs out of names to try.  Note that it is
+not an error if 'make' cannot find or make any makefile; a makefile is
+not always necessary.
+
+   When you use the '-t' or '--touch' option (*note Instead of Executing
+Recipes: Instead of Execution.), you would not want to use an
+out-of-date makefile to decide which targets to touch.  So the '-t'
+option has no effect on updating makefiles; they are really updated even
+if '-t' is specified.  Likewise, '-q' (or '--question') and '-n' (or
+'--just-print') do not prevent updating of makefiles, because an
+out-of-date makefile would result in the wrong output for other targets.
+Thus, 'make -f mfile -n foo' will update 'mfile', read it in, and then
+print the recipe to update 'foo' and its prerequisites without running
+it.  The recipe printed for 'foo' will be the one specified in the
+updated contents of 'mfile'.
+
+   However, on occasion you might actually wish to prevent updating of
+even the makefiles.  You can do this by specifying the makefiles as
+goals in the command line as well as specifying them as makefiles.  When
+the makefile name is specified explicitly as a goal, the options '-t'
+and so on do apply to them.
+
+   Thus, 'make -f mfile -n mfile foo' would read the makefile 'mfile',
+print the recipe needed to update it without actually running it, and
+then print the recipe needed to update 'foo' without running that.  The
+recipe for 'foo' will be the one specified by the existing contents of
+'mfile'.
+
+
+File: make.info,  Node: Overriding Makefiles,  Next: Reading Makefiles,  Prev: Remaking Makefiles,  Up: Makefiles
+
+3.6 Overriding Part of Another Makefile
+=======================================
+
+Sometimes it is useful to have a makefile that is mostly just like
+another makefile.  You can often use the 'include' directive to include
+one in the other, and add more targets or variable definitions.
+However, it is invalid for two makefiles to give different recipes for
+the same target.  But there is another way.
+
+   In the containing makefile (the one that wants to include the other),
+you can use a match-anything pattern rule to say that to remake any
+target that cannot be made from the information in the containing
+makefile, 'make' should look in another makefile.  *Note Pattern
+Rules::, for more information on pattern rules.
+
+   For example, if you have a makefile called 'Makefile' that says how
+to make the target 'foo' (and other targets), you can write a makefile
+called 'GNUmakefile' that contains:
+
+     foo:
+             frobnicate > foo
+
+     %: force
+             @$(MAKE) -f Makefile $@
+     force: ;
+
+   If you say 'make foo', 'make' will find 'GNUmakefile', read it, and
+see that to make 'foo', it needs to run the recipe 'frobnicate > foo'.
+If you say 'make bar', 'make' will find no way to make 'bar' in
+'GNUmakefile', so it will use the recipe from the pattern rule: 'make -f
+Makefile bar'.  If 'Makefile' provides a rule for updating 'bar', 'make'
+will apply the rule.  And likewise for any other target that
+'GNUmakefile' does not say how to make.
+
+   The way this works is that the pattern rule has a pattern of just
+'%', so it matches any target whatever.  The rule specifies a
+prerequisite 'force', to guarantee that the recipe will be run even if
+the target file already exists.  We give the 'force' target an empty
+recipe to prevent 'make' from searching for an implicit rule to build
+it--otherwise it would apply the same match-anything rule to 'force'
+itself and create a prerequisite loop!
+
+
+File: make.info,  Node: Reading Makefiles,  Next: Secondary Expansion,  Prev: Overriding Makefiles,  Up: Makefiles
+
+3.7 How 'make' Reads a Makefile
+===============================
+
+GNU 'make' does its work in two distinct phases.  During the first phase
+it reads all the makefiles, included makefiles, etc.  and internalizes
+all the variables and their values, implicit and explicit rules, and
+constructs a dependency graph of all the targets and their
+prerequisites.  During the second phase, 'make' uses these internal
+structures to determine what targets will need to be rebuilt and to
+invoke the rules necessary to do so.
+
+   It's important to understand this two-phase approach because it has a
+direct impact on how variable and function expansion happens; this is
+often a source of some confusion when writing makefiles.  Here we will
+present a summary of the phases in which expansion happens for different
+constructs within the makefile.  We say that expansion is "immediate" if
+it happens during the first phase: in this case 'make' will expand any
+variables or functions in that section of a construct as the makefile is
+parsed.  We say that expansion is "deferred" if expansion is not
+performed immediately.  Expansion of a deferred construct is not
+performed until either the construct appears later in an immediate
+context, or until the second phase.
+
+   You may not be familiar with some of these constructs yet.  You can
+reference this section as you become familiar with them, in later
+chapters.
+
+Variable Assignment
+-------------------
+
+Variable definitions are parsed as follows:
+
+     IMMEDIATE = DEFERRED
+     IMMEDIATE ?= DEFERRED
+     IMMEDIATE := IMMEDIATE
+     IMMEDIATE ::= IMMEDIATE
+     IMMEDIATE += DEFERRED or IMMEDIATE
+     IMMEDIATE != IMMEDIATE
+
+     define IMMEDIATE
+       DEFERRED
+     endef
+
+     define IMMEDIATE =
+       DEFERRED
+     endef
+
+     define IMMEDIATE ?=
+       DEFERRED
+     endef
+
+     define IMMEDIATE :=
+       IMMEDIATE
+     endef
+
+     define IMMEDIATE ::=
+       IMMEDIATE
+     endef
+
+     define IMMEDIATE +=
+       DEFERRED or IMMEDIATE
+     endef
+
+     define IMMEDIATE !=
+       IMMEDIATE
+     endef
+
+   For the append operator, '+=', the right-hand side is considered
+immediate if the variable was previously set as a simple variable (':='
+or '::='), and deferred otherwise.
+
+   For the shell assignment operator, '!=', the right-hand side is
+evaluated immediately and handed to the shell.  The result is stored in
+the variable named on the left, and that variable becomes a simple
+variable (and will thus be re-evaluated on each reference).
+
+Conditional Directives
+----------------------
+
+Conditional directives are parsed immediately.  This means, for example,
+that automatic variables cannot be used in conditional directives, as
+automatic variables are not set until the recipe for that rule is
+invoked.  If you need to use automatic variables in a conditional
+directive you _must_ move the condition into the recipe and use shell
+conditional syntax instead.
+
+Rule Definition
+---------------
+
+A rule is always expanded the same way, regardless of the form:
+
+     IMMEDIATE : IMMEDIATE ; DEFERRED
+             DEFERRED
+
+   That is, the target and prerequisite sections are expanded
+immediately, and the recipe used to construct the target is always
+deferred.  This general rule is true for explicit rules, pattern rules,
+suffix rules, static pattern rules, and simple prerequisite definitions.
+
+
+File: make.info,  Node: Secondary Expansion,  Prev: Reading Makefiles,  Up: Makefiles
+
+3.8 Secondary Expansion
+=======================
+
+In the previous section we learned that GNU 'make' works in two distinct
+phases: a read-in phase and a target-update phase (*note How 'make'
+Reads a Makefile: Reading Makefiles.).  GNU make also has the ability to
+enable a _second expansion_ of the prerequisites (only) for some or all
+targets defined in the makefile.  In order for this second expansion to
+occur, the special target '.SECONDEXPANSION' must be defined before the
+first prerequisite list that makes use of this feature.
+
+   If that special target is defined then in between the two phases
+mentioned above, right at the end of the read-in phase, all the
+prerequisites of the targets defined after the special target are
+expanded a _second time_.  In most circumstances this secondary
+expansion will have no effect, since all variable and function
+references will have been expanded during the initial parsing of the
+makefiles.  In order to take advantage of the secondary expansion phase
+of the parser, then, it's necessary to _escape_ the variable or function
+reference in the makefile.  In this case the first expansion merely
+un-escapes the reference but doesn't expand it, and expansion is left to
+the secondary expansion phase.  For example, consider this makefile:
+
+     .SECONDEXPANSION:
+     ONEVAR = onefile
+     TWOVAR = twofile
+     myfile: $(ONEVAR) $$(TWOVAR)
+
+   After the first expansion phase the prerequisites list of the
+'myfile' target will be 'onefile' and '$(TWOVAR)'; the first (unescaped)
+variable reference to ONEVAR is expanded, while the second (escaped)
+variable reference is simply unescaped, without being recognized as a
+variable reference.  Now during the secondary expansion the first word
+is expanded again but since it contains no variable or function
+references it remains the value 'onefile', while the second word is now
+a normal reference to the variable TWOVAR, which is expanded to the
+value 'twofile'.  The final result is that there are two prerequisites,
+'onefile' and 'twofile'.
+
+   Obviously, this is not a very interesting case since the same result
+could more easily have been achieved simply by having both variables
+appear, unescaped, in the prerequisites list.  One difference becomes
+apparent if the variables are reset; consider this example:
+
+     .SECONDEXPANSION:
+     AVAR = top
+     onefile: $(AVAR)
+     twofile: $$(AVAR)
+     AVAR = bottom
+
+   Here the prerequisite of 'onefile' will be expanded immediately, and
+resolve to the value 'top', while the prerequisite of 'twofile' will not
+be full expanded until the secondary expansion and yield a value of
+'bottom'.
+
+   This is marginally more exciting, but the true power of this feature
+only becomes apparent when you discover that secondary expansions always
+take place within the scope of the automatic variables for that target.
+This means that you can use variables such as '$@', '$*', etc.  during
+the second expansion and they will have their expected values, just as
+in the recipe.  All you have to do is defer the expansion by escaping
+the '$'.  Also, secondary expansion occurs for both explicit and
+implicit (pattern) rules.  Knowing this, the possible uses for this
+feature increase dramatically.  For example:
+
+     .SECONDEXPANSION:
+     main_OBJS := main.o try.o test.o
+     lib_OBJS := lib.o api.o
+
+     main lib: $$($$@_OBJS)
+
+   Here, after the initial expansion the prerequisites of both the
+'main' and 'lib' targets will be '$($@_OBJS)'.  During the secondary
+expansion, the '$@' variable is set to the name of the target and so the
+expansion for the 'main' target will yield '$(main_OBJS)', or 'main.o
+try.o test.o', while the secondary expansion for the 'lib' target will
+yield '$(lib_OBJS)', or 'lib.o api.o'.
+
+   You can also mix in functions here, as long as they are properly
+escaped:
+
+     main_SRCS := main.c try.c test.c
+     lib_SRCS := lib.c api.c
+
+     .SECONDEXPANSION:
+     main lib: $$(patsubst %.c,%.o,$$($$@_SRCS))
+
+   This version allows users to specify source files rather than object
+files, but gives the same resulting prerequisites list as the previous
+example.
+
+   Evaluation of automatic variables during the secondary expansion
+phase, especially of the target name variable '$$@', behaves similarly
+to evaluation within recipes.  However, there are some subtle
+differences and "corner cases" which come into play for the different
+types of rule definitions that 'make' understands.  The subtleties of
+using the different automatic variables are described below.
+
+Secondary Expansion of Explicit Rules
+-------------------------------------
+
+During the secondary expansion of explicit rules, '$$@' and '$$%'
+evaluate, respectively, to the file name of the target and, when the
+target is an archive member, the target member name.  The '$$<' variable
+evaluates to the first prerequisite in the first rule for this target.
+'$$^' and '$$+' evaluate to the list of all prerequisites of rules _that
+have already appeared_ for the same target ('$$+' with repetitions and
+'$$^' without).  The following example will help illustrate these
+behaviors:
+
+     .SECONDEXPANSION:
+
+     foo: foo.1 bar.1 $$< $$^ $$+    # line #1
+
+     foo: foo.2 bar.2 $$< $$^ $$+    # line #2
+
+     foo: foo.3 bar.3 $$< $$^ $$+    # line #3
+
+   In the first prerequisite list, all three variables ('$$<', '$$^',
+and '$$+') expand to the empty string.  In the second, they will have
+values 'foo.1', 'foo.1 bar.1', and 'foo.1 bar.1' respectively.  In the
+third they will have values 'foo.1', 'foo.1 bar.1 foo.2 bar.2', and
+'foo.1 bar.1 foo.2 bar.2 foo.1 foo.1 bar.1 foo.1 bar.1' respectively.
+
+   Rules undergo secondary expansion in makefile order, except that the
+rule with the recipe is always evaluated last.
+
+   The variables '$$?' and '$$*' are not available and expand to the
+empty string.
+
+Secondary Expansion of Static Pattern Rules
+-------------------------------------------
+
+Rules for secondary expansion of static pattern rules are identical to
+those for explicit rules, above, with one exception: for static pattern
+rules the '$$*' variable is set to the pattern stem.  As with explicit
+rules, '$$?' is not available and expands to the empty string.
+
+Secondary Expansion of Implicit Rules
+-------------------------------------
+
+As 'make' searches for an implicit rule, it substitutes the stem and
+then performs secondary expansion for every rule with a matching target
+pattern.  The value of the automatic variables is derived in the same
+fashion as for static pattern rules.  As an example:
+
+     .SECONDEXPANSION:
+
+     foo: bar
+
+     foo foz: fo%: bo%
+
+     %oo: $$< $$^ $$+ $$*
+
+   When the implicit rule is tried for target 'foo', '$$<' expands to
+'bar', '$$^' expands to 'bar boo', '$$+' also expands to 'bar boo', and
+'$$*' expands to 'f'.
+
+   Note that the directory prefix (D), as described in *note Implicit
+Rule Search Algorithm: Implicit Rule Search, is appended (after
+expansion) to all the patterns in the prerequisites list.  As an
+example:
+
+     .SECONDEXPANSION:
+
+     /tmp/foo.o:
+
+     %.o: $$(addsuffix /%.c,foo bar) foo.h
+             @echo $^
+
+   The prerequisite list printed, after the secondary expansion and
+directory prefix reconstruction, will be '/tmp/foo/foo.c /tmp/bar/foo.c
+foo.h'.  If you are not interested in this reconstruction, you can use
+'$$*' instead of '%' in the prerequisites list.
+
+
+File: make.info,  Node: Rules,  Next: Recipes,  Prev: Makefiles,  Up: Top
+
+4 Writing Rules
+***************
+
+A "rule" appears in the makefile and says when and how to remake certain
+files, called the rule's "targets" (most often only one per rule).  It
+lists the other files that are the "prerequisites" of the target, and
+the "recipe" to use to create or update the target.
+
+   The order of rules is not significant, except for determining the
+"default goal": the target for 'make' to consider, if you do not
+otherwise specify one.  The default goal is the target of the first rule
+in the first makefile.  If the first rule has multiple targets, only the
+first target is taken as the default.  There are two exceptions: a
+target starting with a period is not a default unless it contains one or
+more slashes, '/', as well; and, a target that defines a pattern rule
+has no effect on the default goal.  (*Note Defining and Redefining
+Pattern Rules: Pattern Rules.)
+
+   Therefore, we usually write the makefile so that the first rule is
+the one for compiling the entire program or all the programs described
+by the makefile (often with a target called 'all').  *Note Arguments to
+Specify the Goals: Goals.
+
+* Menu:
+
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as '*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+
+
+File: make.info,  Node: Rule Example,  Next: Rule Syntax,  Prev: Rules,  Up: Rules
+
+4.1 Rule Example
+================
+
+Here is an example of a rule:
+
+     foo.o : foo.c defs.h       # module for twiddling the frobs
+             cc -c -g foo.c
+
+   Its target is 'foo.o' and its prerequisites are 'foo.c' and 'defs.h'.
+It has one command in the recipe: 'cc -c -g foo.c'.  The recipe starts
+with a tab to identify it as a recipe.
+
+   This rule says two things:
+
+   * How to decide whether 'foo.o' is out of date: it is out of date if
+     it does not exist, or if either 'foo.c' or 'defs.h' is more recent
+     than it.
+
+   * How to update the file 'foo.o': by running 'cc' as stated.  The
+     recipe does not explicitly mention 'defs.h', but we presume that
+     'foo.c' includes it, and that that is why 'defs.h' was added to the
+     prerequisites.
+
+
+File: make.info,  Node: Rule Syntax,  Next: Prerequisite Types,  Prev: Rule Example,  Up: Rules
+
+4.2 Rule Syntax
+===============
+
+In general, a rule looks like this:
+
+     TARGETS : PREREQUISITES
+             RECIPE
+             ...
+
+or like this:
+
+     TARGETS : PREREQUISITES ; RECIPE
+             RECIPE
+             ...
+
+   The TARGETS are file names, separated by spaces.  Wildcard characters
+may be used (*note Using Wildcard Characters in File Names: Wildcards.)
+and a name of the form 'A(M)' represents member M in archive file A
+(*note Archive Members as Targets: Archive Members.).  Usually there is
+only one target per rule, but occasionally there is a reason to have
+more (*note Multiple Targets in a Rule: Multiple Targets.).
+
+   The RECIPE lines start with a tab character (or the first character
+in the value of the '.RECIPEPREFIX' variable; *note Special
+Variables::).  The first recipe line may appear on the line after the
+prerequisites, with a tab character, or may appear on the same line,
+with a semicolon.  Either way, the effect is the same.  There are other
+differences in the syntax of recipes.  *Note Writing Recipes in Rules:
+Recipes.
+
+   Because dollar signs are used to start 'make' variable references, if
+you really want a dollar sign in a target or prerequisite you must write
+two of them, '$$' (*note How to Use Variables: Using Variables.).  If
+you have enabled secondary expansion (*note Secondary Expansion::) and
+you want a literal dollar sign in the prerequisites list, you must
+actually write _four_ dollar signs ('$$$$').
+
+   You may split a long line by inserting a backslash followed by a
+newline, but this is not required, as 'make' places no limit on the
+length of a line in a makefile.
+
+   A rule tells 'make' two things: when the targets are out of date, and
+how to update them when necessary.
+
+   The criterion for being out of date is specified in terms of the
+PREREQUISITES, which consist of file names separated by spaces.
+(Wildcards and archive members (*note Archives::) are allowed here too.)
+A target is out of date if it does not exist or if it is older than any
+of the prerequisites (by comparison of last-modification times).  The
+idea is that the contents of the target file are computed based on
+information in the prerequisites, so if any of the prerequisites
+changes, the contents of the existing target file are no longer
+necessarily valid.
+
+   How to update is specified by a RECIPE.  This is one or more lines to
+be executed by the shell (normally 'sh'), but with some extra features
+(*note Writing Recipes in Rules: Recipes.).
+
+
+File: make.info,  Node: Prerequisite Types,  Next: Wildcards,  Prev: Rule Syntax,  Up: Rules
+
+4.3 Types of Prerequisites
+==========================
+
+There are actually two different types of prerequisites understood by
+GNU 'make': normal prerequisites such as described in the previous
+section, and "order-only" prerequisites.  A normal prerequisite makes
+two statements: first, it imposes an order in which recipes will be
+invoked: the recipes for all prerequisites of a target will be completed
+before the recipe for the target is run.  Second, it imposes a
+dependency relationship: if any prerequisite is newer than the target,
+then the target is considered out-of-date and must be rebuilt.
+
+   Normally, this is exactly what you want: if a target's prerequisite
+is updated, then the target should also be updated.
+
+   Occasionally, however, you have a situation where you want to impose
+a specific ordering on the rules to be invoked _without_ forcing the
+target to be updated if one of those rules is executed.  In that case,
+you want to define "order-only" prerequisites.  Order-only prerequisites
+can be specified by placing a pipe symbol ('|') in the prerequisites
+list: any prerequisites to the left of the pipe symbol are normal; any
+prerequisites to the right are order-only:
+
+     TARGETS : NORMAL-PREREQUISITES | ORDER-ONLY-PREREQUISITES
+
+   The normal prerequisites section may of course be empty.  Also, you
+may still declare multiple lines of prerequisites for the same target:
+they are appended appropriately (normal prerequisites are appended to
+the list of normal prerequisites; order-only prerequisites are appended
+to the list of order-only prerequisites).  Note that if you declare the
+same file to be both a normal and an order-only prerequisite, the normal
+prerequisite takes precedence (since they have a strict superset of the
+behavior of an order-only prerequisite).
+
+   Consider an example where your targets are to be placed in a separate
+directory, and that directory might not exist before 'make' is run.  In
+this situation, you want the directory to be created before any targets
+are placed into it but, because the timestamps on directories change
+whenever a file is added, removed, or renamed, we certainly don't want
+to rebuild all the targets whenever the directory's timestamp changes.
+One way to manage this is with order-only prerequisites: make the
+directory an order-only prerequisite on all the targets:
+
+     OBJDIR := objdir
+     OBJS := $(addprefix $(OBJDIR)/,foo.o bar.o baz.o)
+
+     $(OBJDIR)/%.o : %.c
+             $(COMPILE.c) $(OUTPUT_OPTION) $<
+
+     all: $(OBJS)
+
+     $(OBJS): | $(OBJDIR)
+
+     $(OBJDIR):
+             mkdir $(OBJDIR)
+
+   Now the rule to create the 'objdir' directory will be run, if needed,
+before any '.o' is built, but no '.o' will be built because the 'objdir'
+directory timestamp changed.
+
+
+File: make.info,  Node: Wildcards,  Next: Directory Search,  Prev: Prerequisite Types,  Up: Rules
+
+4.4 Using Wildcard Characters in File Names
+===========================================
+
+A single file name can specify many files using "wildcard characters".
+The wildcard characters in 'make' are '*', '?' and '[...]', the same as
+in the Bourne shell.  For example, '*.c' specifies a list of all the
+files (in the working directory) whose names end in '.c'.
+
+   The character '~' at the beginning of a file name also has special
+significance.  If alone, or followed by a slash, it represents your home
+directory.  For example '~/bin' expands to '/home/you/bin'.  If the '~'
+is followed by a word, the string represents the home directory of the
+user named by that word.  For example '~john/bin' expands to
+'/home/john/bin'.  On systems which don't have a home directory for each
+user (such as MS-DOS or MS-Windows), this functionality can be simulated
+by setting the environment variable HOME.
+
+   Wildcard expansion is performed by 'make' automatically in targets
+and in prerequisites.  In recipes, the shell is responsible for wildcard
+expansion.  In other contexts, wildcard expansion happens only if you
+request it explicitly with the 'wildcard' function.
+
+   The special significance of a wildcard character can be turned off by
+preceding it with a backslash.  Thus, 'foo\*bar' would refer to a
+specific file whose name consists of 'foo', an asterisk, and 'bar'.
+
+* Menu:
+
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+
+
+File: make.info,  Node: Wildcard Examples,  Next: Wildcard Pitfall,  Prev: Wildcards,  Up: Wildcards
+
+4.4.1 Wildcard Examples
+-----------------------
+
+Wildcards can be used in the recipe of a rule, where they are expanded
+by the shell.  For example, here is a rule to delete all the object
+files:
+
+     clean:
+             rm -f *.o
+
+   Wildcards are also useful in the prerequisites of a rule.  With the
+following rule in the makefile, 'make print' will print all the '.c'
+files that have changed since the last time you printed them:
+
+     print: *.c
+             lpr -p $?
+             touch print
+
+This rule uses 'print' as an empty target file; see *note Empty Target
+Files to Record Events: Empty Targets.  (The automatic variable '$?' is
+used to print only those files that have changed; see *note Automatic
+Variables::.)
+
+   Wildcard expansion does not happen when you define a variable.  Thus,
+if you write this:
+
+     objects = *.o
+
+then the value of the variable 'objects' is the actual string '*.o'.
+However, if you use the value of 'objects' in a target or prerequisite,
+wildcard expansion will take place there.  If you use the value of
+'objects' in a recipe, the shell may perform wildcard expansion when the
+recipe runs.  To set 'objects' to the expansion, instead use:
+
+     objects := $(wildcard *.o)
+
+*Note Wildcard Function::.
+
+
+File: make.info,  Node: Wildcard Pitfall,  Next: Wildcard Function,  Prev: Wildcard Examples,  Up: Wildcards
+
+4.4.2 Pitfalls of Using Wildcards
+---------------------------------
+
+Now here is an example of a naive way of using wildcard expansion, that
+does not do what you would intend.  Suppose you would like to say that
+the executable file 'foo' is made from all the object files in the
+directory, and you write this:
+
+     objects = *.o
+
+     foo : $(objects)
+             cc -o foo $(CFLAGS) $(objects)
+
+The value of 'objects' is the actual string '*.o'.  Wildcard expansion
+happens in the rule for 'foo', so that each _existing_ '.o' file becomes
+a prerequisite of 'foo' and will be recompiled if necessary.
+
+   But what if you delete all the '.o' files?  When a wildcard matches
+no files, it is left as it is, so then 'foo' will depend on the
+oddly-named file '*.o'.  Since no such file is likely to exist, 'make'
+will give you an error saying it cannot figure out how to make '*.o'.
+This is not what you want!
+
+   Actually it is possible to obtain the desired result with wildcard
+expansion, but you need more sophisticated techniques, including the
+'wildcard' function and string substitution.  *Note The Function
+'wildcard': Wildcard Function.
+
+   Microsoft operating systems (MS-DOS and MS-Windows) use backslashes
+to separate directories in pathnames, like so:
+
+       c:\foo\bar\baz.c
+
+   This is equivalent to the Unix-style 'c:/foo/bar/baz.c' (the 'c:'
+part is the so-called drive letter).  When 'make' runs on these systems,
+it supports backslashes as well as the Unix-style forward slashes in
+pathnames.  However, this support does _not_ include the wildcard
+expansion, where backslash is a quote character.  Therefore, you _must_
+use Unix-style slashes in these cases.
+
+
+File: make.info,  Node: Wildcard Function,  Prev: Wildcard Pitfall,  Up: Wildcards
+
+4.4.3 The Function 'wildcard'
+-----------------------------
+
+Wildcard expansion happens automatically in rules.  But wildcard
+expansion does not normally take place when a variable is set, or inside
+the arguments of a function.  If you want to do wildcard expansion in
+such places, you need to use the 'wildcard' function, like this:
+
+     $(wildcard PATTERN...)
+
+This string, used anywhere in a makefile, is replaced by a
+space-separated list of names of existing files that match one of the
+given file name patterns.  If no existing file name matches a pattern,
+then that pattern is omitted from the output of the 'wildcard' function.
+Note that this is different from how unmatched wildcards behave in
+rules, where they are used verbatim rather than ignored (*note Wildcard
+Pitfall::).
+
+   One use of the 'wildcard' function is to get a list of all the C
+source files in a directory, like this:
+
+     $(wildcard *.c)
+
+   We can change the list of C source files into a list of object files
+by replacing the '.c' suffix with '.o' in the result, like this:
+
+     $(patsubst %.c,%.o,$(wildcard *.c))
+
+(Here we have used another function, 'patsubst'.  *Note Functions for
+String Substitution and Analysis: Text Functions.)
+
+   Thus, a makefile to compile all C source files in the directory and
+then link them together could be written as follows:
+
+     objects := $(patsubst %.c,%.o,$(wildcard *.c))
+
+     foo : $(objects)
+             cc -o foo $(objects)
+
+(This takes advantage of the implicit rule for compiling C programs, so
+there is no need to write explicit rules for compiling the files.  *Note
+The Two Flavors of Variables: Flavors, for an explanation of ':=', which
+is a variant of '='.)
+
+
+File: make.info,  Node: Directory Search,  Next: Phony Targets,  Prev: Wildcards,  Up: Rules
+
+4.5 Searching Directories for Prerequisites
+===========================================
+
+For large systems, it is often desirable to put sources in a separate
+directory from the binaries.  The "directory search" features of 'make'
+facilitate this by searching several directories automatically to find a
+prerequisite.  When you redistribute the files among directories, you do
+not need to change the individual rules, just the search paths.
+
+* Menu:
+
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+
+
+File: make.info,  Node: General Search,  Next: Selective Search,  Prev: Directory Search,  Up: Directory Search
+
+4.5.1 'VPATH': Search Path for All Prerequisites
+------------------------------------------------
+
+The value of the 'make' variable 'VPATH' specifies a list of directories
+that 'make' should search.  Most often, the directories are expected to
+contain prerequisite files that are not in the current directory;
+however, 'make' uses 'VPATH' as a search list for both prerequisites and
+targets of rules.
+
+   Thus, if a file that is listed as a target or prerequisite does not
+exist in the current directory, 'make' searches the directories listed
+in 'VPATH' for a file with that name.  If a file is found in one of
+them, that file may become the prerequisite (see below).  Rules may then
+specify the names of files in the prerequisite list as if they all
+existed in the current directory.  *Note Writing Recipes with Directory
+Search: Recipes/Search.
+
+   In the 'VPATH' variable, directory names are separated by colons or
+blanks.  The order in which directories are listed is the order followed
+by 'make' in its search.  (On MS-DOS and MS-Windows, semi-colons are
+used as separators of directory names in 'VPATH', since the colon can be
+used in the pathname itself, after the drive letter.)
+
+   For example,
+
+     VPATH = src:../headers
+
+specifies a path containing two directories, 'src' and '../headers',
+which 'make' searches in that order.
+
+   With this value of 'VPATH', the following rule,
+
+     foo.o : foo.c
+
+is interpreted as if it were written like this:
+
+     foo.o : src/foo.c
+
+assuming the file 'foo.c' does not exist in the current directory but is
+found in the directory 'src'.
+
+
+File: make.info,  Node: Selective Search,  Next: Search Algorithm,  Prev: General Search,  Up: Directory Search
+
+4.5.2 The 'vpath' Directive
+---------------------------
+
+Similar to the 'VPATH' variable, but more selective, is the 'vpath'
+directive (note lower case), which allows you to specify a search path
+for a particular class of file names: those that match a particular
+pattern.  Thus you can supply certain search directories for one class
+of file names and other directories (or none) for other file names.
+
+   There are three forms of the 'vpath' directive:
+
+'vpath PATTERN DIRECTORIES'
+     Specify the search path DIRECTORIES for file names that match
+     PATTERN.
+
+     The search path, DIRECTORIES, is a list of directories to be
+     searched, separated by colons (semi-colons on MS-DOS and
+     MS-Windows) or blanks, just like the search path used in the
+     'VPATH' variable.
+
+'vpath PATTERN'
+     Clear out the search path associated with PATTERN.
+
+'vpath'
+
+     Clear all search paths previously specified with 'vpath'
+     directives.
+
+   A 'vpath' pattern is a string containing a '%' character.  The string
+must match the file name of a prerequisite that is being searched for,
+the '%' character matching any sequence of zero or more characters (as
+in pattern rules; *note Defining and Redefining Pattern Rules: Pattern
+Rules.).  For example, '%.h' matches files that end in '.h'.  (If there
+is no '%', the pattern must match the prerequisite exactly, which is not
+useful very often.)
+
+   '%' characters in a 'vpath' directive's pattern can be quoted with
+preceding backslashes ('\').  Backslashes that would otherwise quote '%'
+characters can be quoted with more backslashes.  Backslashes that quote
+'%' characters or other backslashes are removed from the pattern before
+it is compared to file names.  Backslashes that are not in danger of
+quoting '%' characters go unmolested.
+
+   When a prerequisite fails to exist in the current directory, if the
+PATTERN in a 'vpath' directive matches the name of the prerequisite
+file, then the DIRECTORIES in that directive are searched just like (and
+before) the directories in the 'VPATH' variable.
+
+   For example,
+
+     vpath %.h ../headers
+
+tells 'make' to look for any prerequisite whose name ends in '.h' in the
+directory '../headers' if the file is not found in the current
+directory.
+
+   If several 'vpath' patterns match the prerequisite file's name, then
+'make' processes each matching 'vpath' directive one by one, searching
+all the directories mentioned in each directive.  'make' handles
+multiple 'vpath' directives in the order in which they appear in the
+makefile; multiple directives with the same pattern are independent of
+each other.
+
+   Thus,
+
+     vpath %.c foo
+     vpath %   blish
+     vpath %.c bar
+
+will look for a file ending in '.c' in 'foo', then 'blish', then 'bar',
+while
+
+     vpath %.c foo:bar
+     vpath %   blish
+
+will look for a file ending in '.c' in 'foo', then 'bar', then 'blish'.
+
+
+File: make.info,  Node: Search Algorithm,  Next: Recipes/Search,  Prev: Selective Search,  Up: Directory Search
+
+4.5.3 How Directory Searches are Performed
+------------------------------------------
+
+When a prerequisite is found through directory search, regardless of
+type (general or selective), the pathname located may not be the one
+that 'make' actually provides you in the prerequisite list.  Sometimes
+the path discovered through directory search is thrown away.
+
+   The algorithm 'make' uses to decide whether to keep or abandon a path
+found via directory search is as follows:
+
+  1. If a target file does not exist at the path specified in the
+     makefile, directory search is performed.
+
+  2. If the directory search is successful, that path is kept and this
+     file is tentatively stored as the target.
+
+  3. All prerequisites of this target are examined using this same
+     method.
+
+  4. After processing the prerequisites, the target may or may not need
+     to be rebuilt:
+
+       a. If the target does _not_ need to be rebuilt, the path to the
+          file found during directory search is used for any
+          prerequisite lists which contain this target.  In short, if
+          'make' doesn't need to rebuild the target then you use the
+          path found via directory search.
+
+       b. If the target _does_ need to be rebuilt (is out-of-date), the
+          pathname found during directory search is _thrown away_, and
+          the target is rebuilt using the file name specified in the
+          makefile.  In short, if 'make' must rebuild, then the target
+          is rebuilt locally, not in the directory found via directory
+          search.
+
+   This algorithm may seem complex, but in practice it is quite often
+exactly what you want.
+
+   Other versions of 'make' use a simpler algorithm: if the file does
+not exist, and it is found via directory search, then that pathname is
+always used whether or not the target needs to be built.  Thus, if the
+target is rebuilt it is created at the pathname discovered during
+directory search.
+
+   If, in fact, this is the behavior you want for some or all of your
+directories, you can use the 'GPATH' variable to indicate this to
+'make'.
+
+   'GPATH' has the same syntax and format as 'VPATH' (that is, a space-
+or colon-delimited list of pathnames).  If an out-of-date target is
+found by directory search in a directory that also appears in 'GPATH',
+then that pathname is not thrown away.  The target is rebuilt using the
+expanded path.
+
+
+File: make.info,  Node: Recipes/Search,  Next: Implicit/Search,  Prev: Search Algorithm,  Up: Directory Search
+
+4.5.4 Writing Recipes with Directory Search
+-------------------------------------------
+
+When a prerequisite is found in another directory through directory
+search, this cannot change the recipe of the rule; they will execute as
+written.  Therefore, you must write the recipe with care so that it will
+look for the prerequisite in the directory where 'make' finds it.
+
+   This is done with the "automatic variables" such as '$^' (*note
+Automatic Variables::).  For instance, the value of '$^' is a list of
+all the prerequisites of the rule, including the names of the
+directories in which they were found, and the value of '$@' is the
+target.  Thus:
+
+     foo.o : foo.c
+             cc -c $(CFLAGS) $^ -o $@
+
+(The variable 'CFLAGS' exists so you can specify flags for C compilation
+by implicit rules; we use it here for consistency so it will affect all
+C compilations uniformly; *note Variables Used by Implicit Rules:
+Implicit Variables.)
+
+   Often the prerequisites include header files as well, which you do
+not want to mention in the recipe.  The automatic variable '$<' is just
+the first prerequisite:
+
+     VPATH = src:../headers
+     foo.o : foo.c defs.h hack.h
+             cc -c $(CFLAGS) $< -o $@
+
+
+File: make.info,  Node: Implicit/Search,  Next: Libraries/Search,  Prev: Recipes/Search,  Up: Directory Search
+
+4.5.5 Directory Search and Implicit Rules
+-----------------------------------------
+
+The search through the directories specified in 'VPATH' or with 'vpath'
+also happens during consideration of implicit rules (*note Using
+Implicit Rules: Implicit Rules.).
+
+   For example, when a file 'foo.o' has no explicit rule, 'make'
+considers implicit rules, such as the built-in rule to compile 'foo.c'
+if that file exists.  If such a file is lacking in the current
+directory, the appropriate directories are searched for it.  If 'foo.c'
+exists (or is mentioned in the makefile) in any of the directories, the
+implicit rule for C compilation is applied.
+
+   The recipes of implicit rules normally use automatic variables as a
+matter of necessity; consequently they will use the file names found by
+directory search with no extra effort.
+
+
+File: make.info,  Node: Libraries/Search,  Prev: Implicit/Search,  Up: Directory Search
+
+4.5.6 Directory Search for Link Libraries
+-----------------------------------------
+
+Directory search applies in a special way to libraries used with the
+linker.  This special feature comes into play when you write a
+prerequisite whose name is of the form '-lNAME'.  (You can tell
+something strange is going on here because the prerequisite is normally
+the name of a file, and the _file name_ of a library generally looks
+like 'libNAME.a', not like '-lNAME'.)
+
+   When a prerequisite's name has the form '-lNAME', 'make' handles it
+specially by searching for the file 'libNAME.so', and, if it is not
+found, for the file 'libNAME.a' in the current directory, in directories
+specified by matching 'vpath' search paths and the 'VPATH' search path,
+and then in the directories '/lib', '/usr/lib', and 'PREFIX/lib'
+(normally '/usr/local/lib', but MS-DOS/MS-Windows versions of 'make'
+behave as if PREFIX is defined to be the root of the DJGPP installation
+tree).
+
+   For example, if there is a '/usr/lib/libcurses.a' library on your
+system (and no '/usr/lib/libcurses.so' file), then
+
+     foo : foo.c -lcurses
+             cc $^ -o $@
+
+would cause the command 'cc foo.c /usr/lib/libcurses.a -o foo' to be
+executed when 'foo' is older than 'foo.c' or than
+'/usr/lib/libcurses.a'.
+
+   Although the default set of files to be searched for is 'libNAME.so'
+and 'libNAME.a', this is customizable via the '.LIBPATTERNS' variable.
+Each word in the value of this variable is a pattern string.  When a
+prerequisite like '-lNAME' is seen, 'make' will replace the percent in
+each pattern in the list with NAME and perform the above directory
+searches using each library file name.
+
+   The default value for '.LIBPATTERNS' is 'lib%.so lib%.a', which
+provides the default behavior described above.
+
+   You can turn off link library expansion completely by setting this
+variable to an empty value.
+
+
+File: make.info,  Node: Phony Targets,  Next: Force Targets,  Prev: Directory Search,  Up: Rules
+
+4.6 Phony Targets
+=================
+
+A phony target is one that is not really the name of a file; rather it
+is just a name for a recipe to be executed when you make an explicit
+request.  There are two reasons to use a phony target: to avoid a
+conflict with a file of the same name, and to improve performance.
+
+   If you write a rule whose recipe will not create the target file, the
+recipe will be executed every time the target comes up for remaking.
+Here is an example:
+
+     clean:
+             rm *.o temp
+
+Because the 'rm' command does not create a file named 'clean', probably
+no such file will ever exist.  Therefore, the 'rm' command will be
+executed every time you say 'make clean'.
+
+   In this example, the 'clean' target will not work properly if a file
+named 'clean' is ever created in this directory.  Since it has no
+prerequisites, 'clean' would always be considered up to date and its
+recipe would not be executed.  To avoid this problem you can explicitly
+declare the target to be phony by making it a prerequisite of the
+special target '.PHONY' (*note Special Built-in Target Names: Special
+Targets.) as follows:
+
+     .PHONY: clean
+     clean:
+             rm *.o temp
+
+Once this is done, 'make clean' will run the recipe regardless of
+whether there is a file named 'clean'.
+
+   Phony targets are also useful in conjunction with recursive
+invocations of 'make' (*note Recursive Use of 'make': Recursion.).  In
+this situation the makefile will often contain a variable which lists a
+number of sub-directories to be built.  A simplistic way to handle this
+is to define one rule with a recipe that loops over the sub-directories,
+like this:
+
+     SUBDIRS = foo bar baz
+
+     subdirs:
+             for dir in $(SUBDIRS); do \
+               $(MAKE) -C $$dir; \
+             done
+
+   There are problems with this method, however.  First, any error
+detected in a sub-make is ignored by this rule, so it will continue to
+build the rest of the directories even when one fails.  This can be
+overcome by adding shell commands to note the error and exit, but then
+it will do so even if 'make' is invoked with the '-k' option, which is
+unfortunate.  Second, and perhaps more importantly, you cannot take
+advantage of 'make''s ability to build targets in parallel (*note
+Parallel Execution: Parallel.), since there is only one rule.
+
+   By declaring the sub-directories as '.PHONY' targets (you must do
+this as the sub-directory obviously always exists; otherwise it won't be
+built) you can remove these problems:
+
+     SUBDIRS = foo bar baz
+
+     .PHONY: subdirs $(SUBDIRS)
+
+     subdirs: $(SUBDIRS)
+
+     $(SUBDIRS):
+             $(MAKE) -C $@
+
+     foo: baz
+
+   Here we've also declared that the 'foo' sub-directory cannot be built
+until after the 'baz' sub-directory is complete; this kind of
+relationship declaration is particularly important when attempting
+parallel builds.
+
+   The implicit rule search (*note Implicit Rules::) is skipped for
+'.PHONY' targets.  This is why declaring a target as '.PHONY' is good
+for performance, even if you are not worried about the actual file
+existing.
+
+   A phony target should not be a prerequisite of a real target file; if
+it is, its recipe will be run every time 'make' goes to update that
+file.  As long as a phony target is never a prerequisite of a real
+target, the phony target recipe will be executed only when the phony
+target is a specified goal (*note Arguments to Specify the Goals:
+Goals.).
+
+   Phony targets can have prerequisites.  When one directory contains
+multiple programs, it is most convenient to describe all of the programs
+in one makefile './Makefile'.  Since the target remade by default will
+be the first one in the makefile, it is common to make this a phony
+target named 'all' and give it, as prerequisites, all the individual
+programs.  For example:
+
+     all : prog1 prog2 prog3
+     .PHONY : all
+
+     prog1 : prog1.o utils.o
+             cc -o prog1 prog1.o utils.o
+
+     prog2 : prog2.o
+             cc -o prog2 prog2.o
+
+     prog3 : prog3.o sort.o utils.o
+             cc -o prog3 prog3.o sort.o utils.o
+
+Now you can say just 'make' to remake all three programs, or specify as
+arguments the ones to remake (as in 'make prog1 prog3').  Phoniness is
+not inherited: the prerequisites of a phony target are not themselves
+phony, unless explicitly declared to be so.
+
+   When one phony target is a prerequisite of another, it serves as a
+subroutine of the other.  For example, here 'make cleanall' will delete
+the object files, the difference files, and the file 'program':
+
+     .PHONY: cleanall cleanobj cleandiff
+
+     cleanall : cleanobj cleandiff
+             rm program
+
+     cleanobj :
+             rm *.o
+
+     cleandiff :
+             rm *.diff
+
+
+File: make.info,  Node: Force Targets,  Next: Empty Targets,  Prev: Phony Targets,  Up: Rules
+
+4.7 Rules without Recipes or Prerequisites
+==========================================
+
+If a rule has no prerequisites or recipe, and the target of the rule is
+a nonexistent file, then 'make' imagines this target to have been
+updated whenever its rule is run.  This implies that all targets
+depending on this one will always have their recipe run.
+
+   An example will illustrate this:
+
+     clean: FORCE
+             rm $(objects)
+     FORCE:
+
+   Here the target 'FORCE' satisfies the special conditions, so the
+target 'clean' that depends on it is forced to run its recipe.  There is
+nothing special about the name 'FORCE', but that is one name commonly
+used this way.
+
+   As you can see, using 'FORCE' this way has the same results as using
+'.PHONY: clean'.
+
+   Using '.PHONY' is more explicit and more efficient.  However, other
+versions of 'make' do not support '.PHONY'; thus 'FORCE' appears in many
+makefiles.  *Note Phony Targets::.
+
+
+File: make.info,  Node: Empty Targets,  Next: Special Targets,  Prev: Force Targets,  Up: Rules
+
+4.8 Empty Target Files to Record Events
+=======================================
+
+The "empty target" is a variant of the phony target; it is used to hold
+recipes for an action that you request explicitly from time to time.
+Unlike a phony target, this target file can really exist; but the file's
+contents do not matter, and usually are empty.
+
+   The purpose of the empty target file is to record, with its
+last-modification time, when the rule's recipe was last executed.  It
+does so because one of the commands in the recipe is a 'touch' command
+to update the target file.
+
+   The empty target file should have some prerequisites (otherwise it
+doesn't make sense).  When you ask to remake the empty target, the
+recipe is executed if any prerequisite is more recent than the target;
+in other words, if a prerequisite has changed since the last time you
+remade the target.  Here is an example:
+
+     print: foo.c bar.c
+             lpr -p $?
+             touch print
+
+With this rule, 'make print' will execute the 'lpr' command if either
+source file has changed since the last 'make print'.  The automatic
+variable '$?' is used to print only those files that have changed (*note
+Automatic Variables::).
+
+
+File: make.info,  Node: Special Targets,  Next: Multiple Targets,  Prev: Empty Targets,  Up: Rules
+
+4.9 Special Built-in Target Names
+=================================
+
+Certain names have special meanings if they appear as targets.
+
+'.PHONY'
+
+     The prerequisites of the special target '.PHONY' are considered to
+     be phony targets.  When it is time to consider such a target,
+     'make' will run its recipe unconditionally, regardless of whether a
+     file with that name exists or what its last-modification time is.
+     *Note Phony Targets: Phony Targets.
+
+'.SUFFIXES'
+
+     The prerequisites of the special target '.SUFFIXES' are the list of
+     suffixes to be used in checking for suffix rules.  *Note
+     Old-Fashioned Suffix Rules: Suffix Rules.
+
+'.DEFAULT'
+
+     The recipe specified for '.DEFAULT' is used for any target for
+     which no rules are found (either explicit rules or implicit rules).
+     *Note Last Resort::.  If a '.DEFAULT' recipe is specified, every
+     file mentioned as a prerequisite, but not as a target in a rule,
+     will have that recipe executed on its behalf.  *Note Implicit Rule
+     Search Algorithm: Implicit Rule Search.
+
+'.PRECIOUS'
+
+     The targets which '.PRECIOUS' depends on are given the following
+     special treatment: if 'make' is killed or interrupted during the
+     execution of their recipes, the target is not deleted.  *Note
+     Interrupting or Killing 'make': Interrupts.  Also, if the target is
+     an intermediate file, it will not be deleted after it is no longer
+     needed, as is normally done.  *Note Chains of Implicit Rules:
+     Chained Rules.  In this latter respect it overlaps with the
+     '.SECONDARY' special target.
+
+     You can also list the target pattern of an implicit rule (such as
+     '%.o') as a prerequisite file of the special target '.PRECIOUS' to
+     preserve intermediate files created by rules whose target patterns
+     match that file's name.
+
+'.INTERMEDIATE'
+
+     The targets which '.INTERMEDIATE' depends on are treated as
+     intermediate files.  *Note Chains of Implicit Rules: Chained Rules.
+     '.INTERMEDIATE' with no prerequisites has no effect.
+
+'.SECONDARY'
+
+     The targets which '.SECONDARY' depends on are treated as
+     intermediate files, except that they are never automatically
+     deleted.  *Note Chains of Implicit Rules: Chained Rules.
+
+     '.SECONDARY' with no prerequisites causes all targets to be treated
+     as secondary (i.e., no target is removed because it is considered
+     intermediate).
+
+'.SECONDEXPANSION'
+
+     If '.SECONDEXPANSION' is mentioned as a target anywhere in the
+     makefile, then all prerequisite lists defined _after_ it appears
+     will be expanded a second time after all makefiles have been read
+     in.  *Note Secondary Expansion: Secondary Expansion.
+
+'.DELETE_ON_ERROR'
+
+     If '.DELETE_ON_ERROR' is mentioned as a target anywhere in the
+     makefile, then 'make' will delete the target of a rule if it has
+     changed and its recipe exits with a nonzero exit status, just as it
+     does when it receives a signal.  *Note Errors in Recipes: Errors.
+
+'.IGNORE'
+
+     If you specify prerequisites for '.IGNORE', then 'make' will ignore
+     errors in execution of the recipe for those particular files.  The
+     recipe for '.IGNORE' (if any) is ignored.
+
+     If mentioned as a target with no prerequisites, '.IGNORE' says to
+     ignore errors in execution of recipes for all files.  This usage of
+     '.IGNORE' is supported only for historical compatibility.  Since
+     this affects every recipe in the makefile, it is not very useful;
+     we recommend you use the more selective ways to ignore errors in
+     specific recipes.  *Note Errors in Recipes: Errors.
+
+'.LOW_RESOLUTION_TIME'
+
+     If you specify prerequisites for '.LOW_RESOLUTION_TIME', 'make'
+     assumes that these files are created by commands that generate low
+     resolution time stamps.  The recipe for the '.LOW_RESOLUTION_TIME'
+     target are ignored.
+
+     The high resolution file time stamps of many modern file systems
+     lessen the chance of 'make' incorrectly concluding that a file is
+     up to date.  Unfortunately, some hosts do not provide a way to set
+     a high resolution file time stamp, so commands like 'cp -p' that
+     explicitly set a file's time stamp must discard its sub-second
+     part.  If a file is created by such a command, you should list it
+     as a prerequisite of '.LOW_RESOLUTION_TIME' so that 'make' does not
+     mistakenly conclude that the file is out of date.  For example:
+
+          .LOW_RESOLUTION_TIME: dst
+          dst: src
+                  cp -p src dst
+
+     Since 'cp -p' discards the sub-second part of 'src''s time stamp,
+     'dst' is typically slightly older than 'src' even when it is up to
+     date.  The '.LOW_RESOLUTION_TIME' line causes 'make' to consider
+     'dst' to be up to date if its time stamp is at the start of the
+     same second that 'src''s time stamp is in.
+
+     Due to a limitation of the archive format, archive member time
+     stamps are always low resolution.  You need not list archive
+     members as prerequisites of '.LOW_RESOLUTION_TIME', as 'make' does
+     this automatically.
+
+'.SILENT'
+
+     If you specify prerequisites for '.SILENT', then 'make' will not
+     print the recipe used to remake those particular files before
+     executing them.  The recipe for '.SILENT' is ignored.
+
+     If mentioned as a target with no prerequisites, '.SILENT' says not
+     to print any recipes before executing them.  This usage of
+     '.SILENT' is supported only for historical compatibility.  We
+     recommend you use the more selective ways to silence specific
+     recipes.  *Note Recipe Echoing: Echoing.  If you want to silence
+     all recipes for a particular run of 'make', use the '-s' or '--silent'
+     option (*note Options Summary::).
+
+'.EXPORT_ALL_VARIABLES'
+
+     Simply by being mentioned as a target, this tells 'make' to export
+     all variables to child processes by default.  *Note Communicating
+     Variables to a Sub-'make': Variables/Recursion.
+
+'.NOTPARALLEL'
+
+     If '.NOTPARALLEL' is mentioned as a target, then this invocation of
+     'make' will be run serially, even if the '-j' option is given.  Any
+     recursively invoked 'make' command will still run recipes in
+     parallel (unless its makefile also contains this target).  Any
+     prerequisites on this target are ignored.
+
+'.ONESHELL'
+
+     If '.ONESHELL' is mentioned as a target, then when a target is
+     built all lines of the recipe will be given to a single invocation
+     of the shell rather than each line being invoked separately (*note
+     Recipe Execution: Execution.).
+
+'.POSIX'
+
+     If '.POSIX' is mentioned as a target, then the makefile will be
+     parsed and run in POSIX-conforming mode.  This does _not_ mean that
+     only POSIX-conforming makefiles will be accepted: all advanced GNU
+     'make' features are still available.  Rather, this target causes
+     'make' to behave as required by POSIX in those areas where 'make''s
+     default behavior differs.
+
+     In particular, if this target is mentioned then recipes will be
+     invoked as if the shell had been passed the '-e' flag: the first
+     failing command in a recipe will cause the recipe to fail
+     immediately.
+
+   Any defined implicit rule suffix also counts as a special target if
+it appears as a target, and so does the concatenation of two suffixes,
+such as '.c.o'.  These targets are suffix rules, an obsolete way of
+defining implicit rules (but a way still widely used).  In principle,
+any target name could be special in this way if you break it in two and
+add both pieces to the suffix list.  In practice, suffixes normally
+begin with '.', so these special target names also begin with '.'.
+*Note Old-Fashioned Suffix Rules: Suffix Rules.
+
+
+File: make.info,  Node: Multiple Targets,  Next: Multiple Rules,  Prev: Special Targets,  Up: Rules
+
+4.10 Multiple Targets in a Rule
+===============================
+
+A rule with multiple targets is equivalent to writing many rules, each
+with one target, and all identical aside from that.  The same recipe
+applies to all the targets, but its effect may vary because you can
+substitute the actual target name into the recipe using '$@'.  The rule
+contributes the same prerequisites to all the targets also.
+
+   This is useful in two cases.
+
+   * You want just prerequisites, no recipe.  For example:
+
+          kbd.o command.o files.o: command.h
+
+     gives an additional prerequisite to each of the three object files
+     mentioned.
+
+   * Similar recipes work for all the targets.  The recipes do not need
+     to be absolutely identical, since the automatic variable '$@' can
+     be used to substitute the particular target to be remade into the
+     commands (*note Automatic Variables::).  For example:
+
+          bigoutput littleoutput : text.g
+                  generate text.g -$(subst output,,$@) > $@
+
+     is equivalent to
+
+          bigoutput : text.g
+                  generate text.g -big > bigoutput
+          littleoutput : text.g
+                  generate text.g -little > littleoutput
+
+     Here we assume the hypothetical program 'generate' makes two types
+     of output, one if given '-big' and one if given '-little'.  *Note
+     Functions for String Substitution and Analysis: Text Functions, for
+     an explanation of the 'subst' function.
+
+   Suppose you would like to vary the prerequisites according to the
+target, much as the variable '$@' allows you to vary the recipe.  You
+cannot do this with multiple targets in an ordinary rule, but you can do
+it with a "static pattern rule".  *Note Static Pattern Rules: Static
+Pattern.
+
+
+File: make.info,  Node: Multiple Rules,  Next: Static Pattern,  Prev: Multiple Targets,  Up: Rules
+
+4.11 Multiple Rules for One Target
+==================================
+
+One file can be the target of several rules.  All the prerequisites
+mentioned in all the rules are merged into one list of prerequisites for
+the target.  If the target is older than any prerequisite from any rule,
+the recipe is executed.
+
+   There can only be one recipe to be executed for a file.  If more than
+one rule gives a recipe for the same file, 'make' uses the last one
+given and prints an error message.  (As a special case, if the file's
+name begins with a dot, no error message is printed.  This odd behavior
+is only for compatibility with other implementations of 'make'... you
+should avoid using it).  Occasionally it is useful to have the same
+target invoke multiple recipes which are defined in different parts of
+your makefile; you can use "double-colon rules" (*note Double-Colon::)
+for this.
+
+   An extra rule with just prerequisites can be used to give a few extra
+prerequisites to many files at once.  For example, makefiles often have
+a variable, such as 'objects', containing a list of all the compiler
+output files in the system being made.  An easy way to say that all of
+them must be recompiled if 'config.h' changes is to write the following:
+
+     objects = foo.o bar.o
+     foo.o : defs.h
+     bar.o : defs.h test.h
+     $(objects) : config.h
+
+   This could be inserted or taken out without changing the rules that
+really specify how to make the object files, making it a convenient form
+to use if you wish to add the additional prerequisite intermittently.
+
+   Another wrinkle is that the additional prerequisites could be
+specified with a variable that you set with a command line argument to
+'make' (*note Overriding Variables: Overriding.).  For example,
+
+     extradeps=
+     $(objects) : $(extradeps)
+
+means that the command 'make extradeps=foo.h' will consider 'foo.h' as a
+prerequisite of each object file, but plain 'make' will not.
+
+   If none of the explicit rules for a target has a recipe, then 'make'
+searches for an applicable implicit rule to find one *note Using
+Implicit Rules: Implicit Rules.).
+
+
+File: make.info,  Node: Static Pattern,  Next: Double-Colon,  Prev: Multiple Rules,  Up: Rules
+
+4.12 Static Pattern Rules
+=========================
+
+"Static pattern rules" are rules which specify multiple targets and
+construct the prerequisite names for each target based on the target
+name.  They are more general than ordinary rules with multiple targets
+because the targets do not have to have identical prerequisites.  Their
+prerequisites must be _analogous_, but not necessarily _identical_.
+
+* Menu:
+
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+
+
+File: make.info,  Node: Static Usage,  Next: Static versus Implicit,  Prev: Static Pattern,  Up: Static Pattern
+
+4.12.1 Syntax of Static Pattern Rules
+-------------------------------------
+
+Here is the syntax of a static pattern rule:
+
+     TARGETS ...: TARGET-PATTERN: PREREQ-PATTERNS ...
+             RECIPE
+             ...
+
+The TARGETS list specifies the targets that the rule applies to.  The
+targets can contain wildcard characters, just like the targets of
+ordinary rules (*note Using Wildcard Characters in File Names:
+Wildcards.).
+
+   The TARGET-PATTERN and PREREQ-PATTERNS say how to compute the
+prerequisites of each target.  Each target is matched against the
+TARGET-PATTERN to extract a part of the target name, called the "stem".
+This stem is substituted into each of the PREREQ-PATTERNS to make the
+prerequisite names (one from each PREREQ-PATTERN).
+
+   Each pattern normally contains the character '%' just once.  When the
+TARGET-PATTERN matches a target, the '%' can match any part of the
+target name; this part is called the "stem".  The rest of the pattern
+must match exactly.  For example, the target 'foo.o' matches the pattern
+'%.o', with 'foo' as the stem.  The targets 'foo.c' and 'foo.out' do not
+match that pattern.
+
+   The prerequisite names for each target are made by substituting the
+stem for the '%' in each prerequisite pattern.  For example, if one
+prerequisite pattern is '%.c', then substitution of the stem 'foo' gives
+the prerequisite name 'foo.c'.  It is legitimate to write a prerequisite
+pattern that does not contain '%'; then this prerequisite is the same
+for all targets.
+
+   '%' characters in pattern rules can be quoted with preceding
+backslashes ('\').  Backslashes that would otherwise quote '%'
+characters can be quoted with more backslashes.  Backslashes that quote
+'%' characters or other backslashes are removed from the pattern before
+it is compared to file names or has a stem substituted into it.
+Backslashes that are not in danger of quoting '%' characters go
+unmolested.  For example, the pattern 'the\%weird\\%pattern\\' has
+'the%weird\' preceding the operative '%' character, and 'pattern\\'
+following it.  The final two backslashes are left alone because they
+cannot affect any '%' character.
+
+   Here is an example, which compiles each of 'foo.o' and 'bar.o' from
+the corresponding '.c' file:
+
+     objects = foo.o bar.o
+
+     all: $(objects)
+
+     $(objects): %.o: %.c
+             $(CC) -c $(CFLAGS) $< -o $@
+
+Here '$<' is the automatic variable that holds the name of the
+prerequisite and '$@' is the automatic variable that holds the name of
+the target; see *note Automatic Variables::.
+
+   Each target specified must match the target pattern; a warning is
+issued for each target that does not.  If you have a list of files, only
+some of which will match the pattern, you can use the 'filter' function
+to remove non-matching file names (*note Functions for String
+Substitution and Analysis: Text Functions.):
+
+     files = foo.elc bar.o lose.o
+
+     $(filter %.o,$(files)): %.o: %.c
+             $(CC) -c $(CFLAGS) $< -o $@
+     $(filter %.elc,$(files)): %.elc: %.el
+             emacs -f batch-byte-compile $<
+
+In this example the result of '$(filter %.o,$(files))' is 'bar.o
+lose.o', and the first static pattern rule causes each of these object
+files to be updated by compiling the corresponding C source file.  The
+result of '$(filter %.elc,$(files))' is 'foo.elc', so that file is made
+from 'foo.el'.
+
+   Another example shows how to use '$*' in static pattern rules:
+
+     bigoutput littleoutput : %output : text.g
+             generate text.g -$* > $@
+
+When the 'generate' command is run, '$*' will expand to the stem, either
+'big' or 'little'.
+
+
+File: make.info,  Node: Static versus Implicit,  Prev: Static Usage,  Up: Static Pattern
+
+4.12.2 Static Pattern Rules versus Implicit Rules
+-------------------------------------------------
+
+A static pattern rule has much in common with an implicit rule defined
+as a pattern rule (*note Defining and Redefining Pattern Rules: Pattern
+Rules.).  Both have a pattern for the target and patterns for
+constructing the names of prerequisites.  The difference is in how
+'make' decides _when_ the rule applies.
+
+   An implicit rule _can_ apply to any target that matches its pattern,
+but it _does_ apply only when the target has no recipe otherwise
+specified, and only when the prerequisites can be found.  If more than
+one implicit rule appears applicable, only one applies; the choice
+depends on the order of rules.
+
+   By contrast, a static pattern rule applies to the precise list of
+targets that you specify in the rule.  It cannot apply to any other
+target and it invariably does apply to each of the targets specified.
+If two conflicting rules apply, and both have recipes, that's an error.
+
+   The static pattern rule can be better than an implicit rule for these
+reasons:
+
+   * You may wish to override the usual implicit rule for a few files
+     whose names cannot be categorized syntactically but can be given in
+     an explicit list.
+
+   * If you cannot be sure of the precise contents of the directories
+     you are using, you may not be sure which other irrelevant files
+     might lead 'make' to use the wrong implicit rule.  The choice might
+     depend on the order in which the implicit rule search is done.
+     With static pattern rules, there is no uncertainty: each rule
+     applies to precisely the targets specified.
+
+
+File: make.info,  Node: Double-Colon,  Next: Automatic Prerequisites,  Prev: Static Pattern,  Up: Rules
+
+4.13 Double-Colon Rules
+=======================
+
+"Double-colon" rules are explicit rules written with '::' instead of ':'
+after the target names.  They are handled differently from ordinary
+rules when the same target appears in more than one rule.  Pattern rules
+with double-colons have an entirely different meaning (*note
+Match-Anything Rules::).
+
+   When a target appears in multiple rules, all the rules must be the
+same type: all ordinary, or all double-colon.  If they are double-colon,
+each of them is independent of the others.  Each double-colon rule's
+recipe is executed if the target is older than any prerequisites of that
+rule.  If there are no prerequisites for that rule, its recipe is always
+executed (even if the target already exists).  This can result in
+executing none, any, or all of the double-colon rules.
+
+   Double-colon rules with the same target are in fact completely
+separate from one another.  Each double-colon rule is processed
+individually, just as rules with different targets are processed.
+
+   The double-colon rules for a target are executed in the order they
+appear in the makefile.  However, the cases where double-colon rules
+really make sense are those where the order of executing the recipes
+would not matter.
+
+   Double-colon rules are somewhat obscure and not often very useful;
+they provide a mechanism for cases in which the method used to update a
+target differs depending on which prerequisite files caused the update,
+and such cases are rare.
+
+   Each double-colon rule should specify a recipe; if it does not, an
+implicit rule will be used if one applies.  *Note Using Implicit Rules:
+Implicit Rules.
+
+
+File: make.info,  Node: Automatic Prerequisites,  Prev: Double-Colon,  Up: Rules
+
+4.14 Generating Prerequisites Automatically
+===========================================
+
+In the makefile for a program, many of the rules you need to write often
+say only that some object file depends on some header file.  For
+example, if 'main.c' uses 'defs.h' via an '#include', you would write:
+
+     main.o: defs.h
+
+You need this rule so that 'make' knows that it must remake 'main.o'
+whenever 'defs.h' changes.  You can see that for a large program you
+would have to write dozens of such rules in your makefile.  And, you
+must always be very careful to update the makefile every time you add or
+remove an '#include'.
+
+   To avoid this hassle, most modern C compilers can write these rules
+for you, by looking at the '#include' lines in the source files.
+Usually this is done with the '-M' option to the compiler.  For example,
+the command:
+
+     cc -M main.c
+
+generates the output:
+
+     main.o : main.c defs.h
+
+Thus you no longer have to write all those rules yourself.  The compiler
+will do it for you.
+
+   Note that such a rule constitutes mentioning 'main.o' in a makefile,
+so it can never be considered an intermediate file by implicit rule
+search.  This means that 'make' won't ever remove the file after using
+it; *note Chains of Implicit Rules: Chained Rules.
+
+   With old 'make' programs, it was traditional practice to use this
+compiler feature to generate prerequisites on demand with a command like
+'make depend'.  That command would create a file 'depend' containing all
+the automatically-generated prerequisites; then the makefile could use
+'include' to read them in (*note Include::).
+
+   In GNU 'make', the feature of remaking makefiles makes this practice
+obsolete--you need never tell 'make' explicitly to regenerate the
+prerequisites, because it always regenerates any makefile that is out of
+date.  *Note Remaking Makefiles::.
+
+   The practice we recommend for automatic prerequisite generation is to
+have one makefile corresponding to each source file.  For each source
+file 'NAME.c' there is a makefile 'NAME.d' which lists what files the
+object file 'NAME.o' depends on.  That way only the source files that
+have changed need to be rescanned to produce the new prerequisites.
+
+   Here is the pattern rule to generate a file of prerequisites (i.e., a
+makefile) called 'NAME.d' from a C source file called 'NAME.c':
+
+     %.d: %.c
+             @set -e; rm -f $@; \
+              $(CC) -M $(CPPFLAGS) $< > $@.$$$$; \
+              sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
+              rm -f $@.$$$$
+
+*Note Pattern Rules::, for information on defining pattern rules.  The
+'-e' flag to the shell causes it to exit immediately if the '$(CC)'
+command (or any other command) fails (exits with a nonzero status).
+
+   With the GNU C compiler, you may wish to use the '-MM' flag instead
+of '-M'.  This omits prerequisites on system header files.  *Note
+Options Controlling the Preprocessor: (gcc)Preprocessor Options, for
+details.
+
+   The purpose of the 'sed' command is to translate (for example):
+
+     main.o : main.c defs.h
+
+into:
+
+     main.o main.d : main.c defs.h
+
+This makes each '.d' file depend on all the source and header files that
+the corresponding '.o' file depends on.  'make' then knows it must
+regenerate the prerequisites whenever any of the source or header files
+changes.
+
+   Once you've defined the rule to remake the '.d' files, you then use
+the 'include' directive to read them all in.  *Note Include::.  For
+example:
+
+     sources = foo.c bar.c
+
+     include $(sources:.c=.d)
+
+(This example uses a substitution variable reference to translate the
+list of source files 'foo.c bar.c' into a list of prerequisite
+makefiles, 'foo.d bar.d'.  *Note Substitution Refs::, for full
+information on substitution references.)  Since the '.d' files are
+makefiles like any others, 'make' will remake them as necessary with no
+further work from you.  *Note Remaking Makefiles::.
+
+   Note that the '.d' files contain target definitions; you should be
+sure to place the 'include' directive _after_ the first, default goal in
+your makefiles or run the risk of having a random object file become the
+default goal.  *Note How Make Works::.
+
+
+File: make.info,  Node: Recipes,  Next: Using Variables,  Prev: Rules,  Up: Top
+
+5 Writing Recipes in Rules
+**************************
+
+The recipe of a rule consists of one or more shell command lines to be
+executed, one at a time, in the order they appear.  Typically, the
+result of executing these commands is that the target of the rule is
+brought up to date.
+
+   Users use many different shell programs, but recipes in makefiles are
+always interpreted by '/bin/sh' unless the makefile specifies otherwise.
+*Note Recipe Execution: Execution.
+
+* Menu:
+
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking 'make' from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+
+
+File: make.info,  Node: Recipe Syntax,  Next: Echoing,  Prev: Recipes,  Up: Recipes
+
+5.1 Recipe Syntax
+=================
+
+Makefiles have the unusual property that there are really two distinct
+syntaxes in one file.  Most of the makefile uses 'make' syntax (*note
+Writing Makefiles: Makefiles.).  However, recipes are meant to be
+interpreted by the shell and so they are written using shell syntax.
+The 'make' program does not try to understand shell syntax: it performs
+only a very few specific translations on the content of the recipe
+before handing it to the shell.
+
+   Each line in the recipe must start with a tab (or the first character
+in the value of the '.RECIPEPREFIX' variable; *note Special
+Variables::), except that the first recipe line may be attached to the
+target-and-prerequisites line with a semicolon in between.  _Any_ line
+in the makefile that begins with a tab and appears in a "rule context"
+(that is, after a rule has been started until another rule or variable
+definition) will be considered part of a recipe for that rule.  Blank
+lines and lines of just comments may appear among the recipe lines; they
+are ignored.
+
+   Some consequences of these rules include:
+
+   * A blank line that begins with a tab is not blank: it's an empty
+     recipe (*note Empty Recipes::).
+
+   * A comment in a recipe is not a 'make' comment; it will be passed to
+     the shell as-is.  Whether the shell treats it as a comment or not
+     depends on your shell.
+
+   * A variable definition in a "rule context" which is indented by a
+     tab as the first character on the line, will be considered part of
+     a recipe, not a 'make' variable definition, and passed to the
+     shell.
+
+   * A conditional expression ('ifdef', 'ifeq', etc.  *note Syntax of
+     Conditionals: Conditional Syntax.) in a "rule context" which is
+     indented by a tab as the first character on the line, will be
+     considered part of a recipe and be passed to the shell.
+
+* Menu:
+
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using 'make' variables in recipes.
+
+
+File: make.info,  Node: Splitting Recipe Lines,  Next: Variables in Recipes,  Prev: Recipe Syntax,  Up: Recipe Syntax
+
+5.1.1 Splitting Recipe Lines
+----------------------------
+
+One of the few ways in which 'make' does interpret recipes is checking
+for a backslash just before the newline.  As in normal makefile syntax,
+a single logical recipe line can be split into multiple physical lines
+in the makefile by placing a backslash before each newline.  A sequence
+of lines like this is considered a single recipe line, and one instance
+of the shell will be invoked to run it.
+
+   However, in contrast to how they are treated in other places in a
+makefile (*note Splitting Long Lines: Splitting Lines.),
+backslash/newline pairs are _not_ removed from the recipe.  Both the
+backslash and the newline characters are preserved and passed to the
+shell.  How the backslash/newline is interpreted depends on your shell.
+If the first character of the next line after the backslash/newline is
+the recipe prefix character (a tab by default; *note Special
+Variables::), then that character (and only that character) is removed.
+Whitespace is never added to the recipe.
+
+   For example, the recipe for the all target in this makefile:
+
+     all :
+             @echo no\
+     space
+             @echo no\
+             space
+             @echo one \
+             space
+             @echo one\
+              space
+
+consists of four separate shell commands where the output is:
+
+     nospace
+     nospace
+     one space
+     one space
+
+   As a more complex example, this makefile:
+
+     all : ; @echo 'hello \
+             world' ; echo "hello \
+         world"
+
+will invoke one shell with a command of:
+
+     echo 'hello \
+     world' ; echo "hello \
+         world"
+
+which, according to shell quoting rules, will yield the following
+output:
+
+     hello \
+     world
+     hello     world
+
+Notice how the backslash/newline pair was removed inside the string
+quoted with double quotes ('"..."'), but not from the string quoted with
+single quotes (''...'').  This is the way the default shell ('/bin/sh')
+handles backslash/newline pairs.  If you specify a different shell in
+your makefiles it may treat them differently.
+
+   Sometimes you want to split a long line inside of single quotes, but
+you don't want the backslash/newline to appear in the quoted content.
+This is often the case when passing scripts to languages such as Perl,
+where extraneous backslashes inside the script can change its meaning or
+even be a syntax error.  One simple way of handling this is to place the
+quoted string, or even the entire command, into a 'make' variable then
+use the variable in the recipe.  In this situation the newline quoting
+rules for makefiles will be used, and the backslash/newline will be
+removed.  If we rewrite our example above using this method:
+
+     HELLO = 'hello \
+     world'
+
+     all : ; @echo $(HELLO)
+
+we will get output like this:
+
+     hello world
+
+   If you like, you can also use target-specific variables (*note
+Target-specific Variable Values: Target-specific.) to obtain a tighter
+correspondence between the variable and the recipe that uses it.
+
+
+File: make.info,  Node: Variables in Recipes,  Prev: Splitting Recipe Lines,  Up: Recipe Syntax
+
+5.1.2 Using Variables in Recipes
+--------------------------------
+
+The other way in which 'make' processes recipes is by expanding any
+variable references in them (*note Basics of Variable References:
+Reference.).  This occurs after make has finished reading all the
+makefiles and the target is determined to be out of date; so, the
+recipes for targets which are not rebuilt are never expanded.
+
+   Variable and function references in recipes have identical syntax and
+semantics to references elsewhere in the makefile.  They also have the
+same quoting rules: if you want a dollar sign to appear in your recipe,
+you must double it ('$$').  For shells like the default shell, that use
+dollar signs to introduce variables, it's important to keep clear in
+your mind whether the variable you want to reference is a 'make'
+variable (use a single dollar sign) or a shell variable (use two dollar
+signs).  For example:
+
+     LIST = one two three
+     all:
+             for i in $(LIST); do \
+                 echo $$i; \
+             done
+
+results in the following command being passed to the shell:
+
+     for i in one two three; do \
+         echo $i; \
+     done
+
+which generates the expected result:
+
+     one
+     two
+     three
+
+
+File: make.info,  Node: Echoing,  Next: Execution,  Prev: Recipe Syntax,  Up: Recipes
+
+5.2 Recipe Echoing
+==================
+
+Normally 'make' prints each line of the recipe before it is executed.
+We call this "echoing" because it gives the appearance that you are
+typing the lines yourself.
+
+   When a line starts with '@', the echoing of that line is suppressed.
+The '@' is discarded before the line is passed to the shell.  Typically
+you would use this for a command whose only effect is to print
+something, such as an 'echo' command to indicate progress through the
+makefile:
+
+     @echo About to make distribution files
+
+   When 'make' is given the flag '-n' or '--just-print' it only echoes
+most recipes, without executing them.  *Note Summary of Options: Options
+Summary.  In this case even the recipe lines starting with '@' are
+printed.  This flag is useful for finding out which recipes 'make'
+thinks are necessary without actually doing them.
+
+   The '-s' or '--silent' flag to 'make' prevents all echoing, as if all
+recipes started with '@'.  A rule in the makefile for the special target
+'.SILENT' without prerequisites has the same effect (*note Special
+Built-in Target Names: Special Targets.).  '.SILENT' is essentially
+obsolete since '@' is more flexible.
+
+
+File: make.info,  Node: Execution,  Next: Parallel,  Prev: Echoing,  Up: Recipes
+
+5.3 Recipe Execution
+====================
+
+When it is time to execute recipes to update a target, they are executed
+by invoking a new sub-shell for each line of the recipe, unless the
+'.ONESHELL' special target is in effect (*note Using One Shell: One
+Shell.) (In practice, 'make' may take shortcuts that do not affect the
+results.)
+
+   *Please note:* this implies that setting shell variables and invoking
+shell commands such as 'cd' that set a context local to each process
+will not affect the following lines in the recipe.(1)  If you want to
+use 'cd' to affect the next statement, put both statements in a single
+recipe line.  Then 'make' will invoke one shell to run the entire line,
+and the shell will execute the statements in sequence.  For example:
+
+     foo : bar/lose
+             cd $(@D) && gobble $(@F) > ../$@
+
+Here we use the shell AND operator ('&&') so that if the 'cd' command
+fails, the script will fail without trying to invoke the 'gobble'
+command in the wrong directory, which could cause problems (in this case
+it would certainly cause '../foo' to be truncated, at least).
+
+* Menu:
+
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How 'make' chooses the shell used
+                                  to run recipes.
+
+   ---------- Footnotes ----------
+
+   (1) On MS-DOS, the value of current working directory is *global*, so
+changing it _will_ affect the following recipe lines on those systems.
+
+
+File: make.info,  Node: One Shell,  Next: Choosing the Shell,  Prev: Execution,  Up: Execution
+
+5.3.1 Using One Shell
+---------------------
+
+Sometimes you would prefer that all the lines in the recipe be passed to
+a single invocation of the shell.  There are generally two situations
+where this is useful: first, it can improve performance in makefiles
+where recipes consist of many command lines, by avoiding extra
+processes.  Second, you might want newlines to be included in your
+recipe command (for example perhaps you are using a very different
+interpreter as your 'SHELL').  If the '.ONESHELL' special target appears
+anywhere in the makefile then _all_ recipe lines for each target will be
+provided to a single invocation of the shell.  Newlines between recipe
+lines will be preserved.  For example:
+
+     .ONESHELL:
+     foo : bar/lose
+             cd $(@D)
+             gobble $(@F) > ../$@
+
+would now work as expected even though the commands are on different
+recipe lines.
+
+   If '.ONESHELL' is provided, then only the first line of the recipe
+will be checked for the special prefix characters ('@', '-', and '+').
+Subsequent lines will include the special characters in the recipe line
+when the 'SHELL' is invoked.  If you want your recipe to start with one
+of these special characters you'll need to arrange for them to not be
+the first characters on the first line, perhaps by adding a comment or
+similar.  For example, this would be a syntax error in Perl because the
+first '@' is removed by make:
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             @f = qw(a b c);
+             print "@f\n";
+
+However, either of these alternatives would work properly:
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             # Make sure "@" is not the first character on the first line
+             @f = qw(a b c);
+             print "@f\n";
+
+or
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             my @f = qw(a b c);
+             print "@f\n";
+
+   As a special feature, if 'SHELL' is determined to be a POSIX-style
+shell, the special prefix characters in "internal" recipe lines will
+_removed_ before the recipe is processed.  This feature is intended to
+allow existing makefiles to add the '.ONESHELL' special target and still
+run properly without extensive modifications.  Since the special prefix
+characters are not legal at the beginning of a line in a POSIX shell
+script this is not a loss in functionality.  For example, this works as
+expected:
+
+     .ONESHELL:
+     foo : bar/lose
+             @cd $(@D)
+             @gobble $(@F) > ../$@
+
+   Even with this special feature, however, makefiles with '.ONESHELL'
+will behave differently in ways that could be noticeable.  For example,
+normally if any line in the recipe fails, that causes the rule to fail
+and no more recipe lines are processed.  Under '.ONESHELL' a failure of
+any but the final recipe line will not be noticed by 'make'.  You can
+modify '.SHELLFLAGS' to add the '-e' option to the shell which will
+cause any failure anywhere in the command line to cause the shell to
+fail, but this could itself cause your recipe to behave differently.
+Ultimately you may need to harden your recipe lines to allow them to
+work with '.ONESHELL'.
+
+
+File: make.info,  Node: Choosing the Shell,  Prev: One Shell,  Up: Execution
+
+5.3.2 Choosing the Shell
+------------------------
+
+The program used as the shell is taken from the variable 'SHELL'.  If
+this variable is not set in your makefile, the program '/bin/sh' is used
+as the shell.  The argument(s) passed to the shell are taken from the
+variable '.SHELLFLAGS'.  The default value of '.SHELLFLAGS' is '-c'
+normally, or '-ec' in POSIX-conforming mode.
+
+   Unlike most variables, the variable 'SHELL' is never set from the
+environment.  This is because the 'SHELL' environment variable is used
+to specify your personal choice of shell program for interactive use.
+It would be very bad for personal choices like this to affect the
+functioning of makefiles.  *Note Variables from the Environment:
+Environment.
+
+   Furthermore, when you do set 'SHELL' in your makefile that value is
+_not_ exported in the environment to recipe lines that 'make' invokes.
+Instead, the value inherited from the user's environment, if any, is
+exported.  You can override this behavior by explicitly exporting
+'SHELL' (*note Communicating Variables to a Sub-'make':
+Variables/Recursion.), forcing it to be passed in the environment to
+recipe lines.
+
+   However, on MS-DOS and MS-Windows the value of 'SHELL' in the
+environment *is* used, since on those systems most users do not set this
+variable, and therefore it is most likely set specifically to be used by
+'make'.  On MS-DOS, if the setting of 'SHELL' is not suitable for
+'make', you can set the variable 'MAKESHELL' to the shell that 'make'
+should use; if set it will be used as the shell instead of the value of
+'SHELL'.
+
+Choosing a Shell in DOS and Windows
+...................................
+
+Choosing a shell in MS-DOS and MS-Windows is much more complex than on
+other systems.
+
+   On MS-DOS, if 'SHELL' is not set, the value of the variable 'COMSPEC'
+(which is always set) is used instead.
+
+   The processing of lines that set the variable 'SHELL' in Makefiles is
+different on MS-DOS. The stock shell, 'command.com', is ridiculously
+limited in its functionality and many users of 'make' tend to install a
+replacement shell.  Therefore, on MS-DOS, 'make' examines the value of
+'SHELL', and changes its behavior based on whether it points to a
+Unix-style or DOS-style shell.  This allows reasonable functionality
+even if 'SHELL' points to 'command.com'.
+
+   If 'SHELL' points to a Unix-style shell, 'make' on MS-DOS
+additionally checks whether that shell can indeed be found; if not, it
+ignores the line that sets 'SHELL'.  In MS-DOS, GNU 'make' searches for
+the shell in the following places:
+
+  1. In the precise place pointed to by the value of 'SHELL'.  For
+     example, if the makefile specifies 'SHELL = /bin/sh', 'make' will
+     look in the directory '/bin' on the current drive.
+
+  2. In the current directory.
+
+  3. In each of the directories in the 'PATH' variable, in order.
+
+   In every directory it examines, 'make' will first look for the
+specific file ('sh' in the example above).  If this is not found, it
+will also look in that directory for that file with one of the known
+extensions which identify executable files.  For example '.exe', '.com',
+'.bat', '.btm', '.sh', and some others.
+
+   If any of these attempts is successful, the value of 'SHELL' will be
+set to the full pathname of the shell as found.  However, if none of
+these is found, the value of 'SHELL' will not be changed, and thus the
+line that sets it will be effectively ignored.  This is so 'make' will
+only support features specific to a Unix-style shell if such a shell is
+actually installed on the system where 'make' runs.
+
+   Note that this extended search for the shell is limited to the cases
+where 'SHELL' is set from the Makefile; if it is set in the environment
+or command line, you are expected to set it to the full pathname of the
+shell, exactly as things are on Unix.
+
+   The effect of the above DOS-specific processing is that a Makefile
+that contains 'SHELL = /bin/sh' (as many Unix makefiles do), will work
+on MS-DOS unaltered if you have e.g. 'sh.exe' installed in some
+directory along your 'PATH'.
+
+
+File: make.info,  Node: Parallel,  Next: Errors,  Prev: Execution,  Up: Recipes
+
+5.4 Parallel Execution
+======================
+
+GNU 'make' knows how to execute several recipes at once.  Normally,
+'make' will execute only one recipe at a time, waiting for it to finish
+before executing the next.  However, the '-j' or '--jobs' option tells
+'make' to execute many recipes simultaneously.  You can inhibit
+parallelism in a particular makefile with the '.NOTPARALLEL'
+pseudo-target (*note Special Built-in Target Names: Special Targets.).
+
+   On MS-DOS, the '-j' option has no effect, since that system doesn't
+support multi-processing.
+
+   If the '-j' option is followed by an integer, this is the number of
+recipes to execute at once; this is called the number of "job slots".
+If there is nothing looking like an integer after the '-j' option, there
+is no limit on the number of job slots.  The default number of job slots
+is one, which means serial execution (one thing at a time).
+
+   Handling recursive 'make' invocations raises issues for parallel
+execution.  For more information on this, see *note Communicating
+Options to a Sub-'make': Options/Recursion.
+
+   If a recipe fails (is killed by a signal or exits with a nonzero
+status), and errors are not ignored for that recipe (*note Errors in
+Recipes: Errors.), the remaining recipe lines to remake the same target
+will not be run.  If a recipe fails and the '-k' or '--keep-going'
+option was not given (*note Summary of Options: Options Summary.),
+'make' aborts execution.  If make terminates for any reason (including a
+signal) with child processes running, it waits for them to finish before
+actually exiting.
+
+   When the system is heavily loaded, you will probably want to run
+fewer jobs than when it is lightly loaded.  You can use the '-l' option
+to tell 'make' to limit the number of jobs to run at once, based on the
+load average.  The '-l' or '--max-load' option is followed by a
+floating-point number.  For example,
+
+     -l 2.5
+
+will not let 'make' start more than one job if the load average is above
+2.5.  The '-l' option with no following number removes the load limit,
+if one was given with a previous '-l' option.
+
+   More precisely, when 'make' goes to start up a job, and it already
+has at least one job running, it checks the current load average; if it
+is not lower than the limit given with '-l', 'make' waits until the load
+average goes below that limit, or until all the other jobs finish.
+
+   By default, there is no load limit.
+
+* Menu:
+
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+
+
+File: make.info,  Node: Parallel Output,  Next: Parallel Input,  Prev: Parallel,  Up: Parallel
+
+5.4.1 Output During Parallel Execution
+--------------------------------------
+
+When running several recipes in parallel the output from each recipe
+appears as soon as it is generated, with the result that messages from
+different recipes may be interspersed, sometimes even appearing on the
+same line.  This can make reading the output very difficult.
+
+   To avoid this you can use the '--output-sync' ('-O') option.  This
+option instructs 'make' to save the output from the commands it invokes
+and print it all once the commands are completed.  Additionally, if
+there are multiple recursive 'make' invocations running in parallel,
+they will communicate so that only one of them is generating output at a
+time.
+
+   If working directory printing is enabled (*note The
+'--print-directory' Option: -w Option.), the enter/leave messages are
+printed around each output grouping.  If you prefer not to see these
+messages add the '--no-print-directory' option to 'MAKEFLAGS'.
+
+   There are four levels of granularity when synchronizing output,
+specified by giving an argument to the option (e.g., '-Oline' or
+'--output-sync=recurse').
+
+'none'
+     This is the default: all output is sent directly as it is generated
+     and no synchronization is performed.
+
+'line'
+     Output from each individual line of the recipe is grouped and
+     printed as soon as that line is complete.  If a recipe consists of
+     multiple lines, they may be interspersed with lines from other
+     recipes.
+
+'target'
+     Output from the entire recipe for each target is grouped and
+     printed once the target is complete.  This is the default if the
+     '--output-sync' or '-O' option is given with no argument.
+
+'recurse'
+     Output from each recursive invocation of 'make' is grouped and
+     printed once the recursive invocation is complete.
+
+   Regardless of the mode chosen, the total build time will be the same.
+The only difference is in how the output appears.
+
+   The 'target' and 'recurse' modes both collect the output of the
+entire recipe of a target and display it uninterrupted when the recipe
+completes.  The difference between them is in how recipes that contain
+recursive invocations of 'make' are treated (*note Recursive Use of
+'make': Recursion.).  For all recipes which have no recursive lines, the
+'target' and 'recurse' modes behave identically.
+
+   If the 'recurse' mode is chosen, recipes that contain recursive
+'make' invocations are treated the same as other targets: the output
+from the recipe, including the output from the recursive 'make', is
+saved and printed after the entire recipe is complete.  This ensures
+output from all the targets built by a given recursive 'make' instance
+are grouped together, which may make the output easier to understand.
+However it also leads to long periods of time during the build where no
+output is seen, followed by large bursts of output.  If you are not
+watching the build as it proceeds, but instead viewing a log of the
+build after the fact, this may be the best option for you.
+
+   If you are watching the output, the long gaps of quiet during the
+build can be frustrating.  The 'target' output synchronization mode
+detects when 'make' is going to be invoked recursively, using the
+standard methods, and it will not synchronize the output of those lines.
+The recursive 'make' will perform the synchronization for its targets
+and the output from each will be displayed immediately when it
+completes.  Be aware that output from recursive lines of the recipe are
+not synchronized (for example if the recursive line prints a message
+before running 'make', that message will not be synchronized).
+
+   The 'line' mode can be useful for front-ends that are watching the
+output of 'make' to track when recipes are started and completed.
+
+   Some programs invoked by 'make' may behave differently if they
+determine they're writing output to a terminal versus a file (often
+described as "interactive" vs.  "non-interactive" modes).  For example,
+many programs that can display colorized output will not do so if they
+determine they are not writing to a terminal.  If your makefile invokes
+a program like this then using the output synchronization options will
+cause the program to believe it's running in "non-interactive" mode even
+though the output will ultimately go to the terminal.
+
+
+File: make.info,  Node: Parallel Input,  Prev: Parallel Output,  Up: Parallel
+
+5.4.2 Input During Parallel Execution
+-------------------------------------
+
+Two processes cannot both take input from the same device at the same
+time.  To make sure that only one recipe tries to take input from the
+terminal at once, 'make' will invalidate the standard input streams of
+all but one running recipe.  If another recipe attempts to read from
+standard input it will usually incur a fatal error (a 'Broken pipe'
+signal).
+
+   It is unpredictable which recipe will have a valid standard input
+stream (which will come from the terminal, or wherever you redirect the
+standard input of 'make').  The first recipe run will always get it
+first, and the first recipe started after that one finishes will get it
+next, and so on.
+
+   We will change how this aspect of 'make' works if we find a better
+alternative.  In the mean time, you should not rely on any recipe using
+standard input at all if you are using the parallel execution feature;
+but if you are not using this feature, then standard input works
+normally in all recipes.
+
+
+File: make.info,  Node: Errors,  Next: Interrupts,  Prev: Parallel,  Up: Recipes
+
+5.5 Errors in Recipes
+=====================
+
+After each shell invocation returns, 'make' looks at its exit status.
+If the shell completed successfully (the exit status is zero), the next
+line in the recipe is executed in a new shell; after the last line is
+finished, the rule is finished.
+
+   If there is an error (the exit status is nonzero), 'make' gives up on
+the current rule, and perhaps on all rules.
+
+   Sometimes the failure of a certain recipe line does not indicate a
+problem.  For example, you may use the 'mkdir' command to ensure that a
+directory exists.  If the directory already exists, 'mkdir' will report
+an error, but you probably want 'make' to continue regardless.
+
+   To ignore errors in a recipe line, write a '-' at the beginning of
+the line's text (after the initial tab).  The '-' is discarded before
+the line is passed to the shell for execution.
+
+   For example,
+
+     clean:
+             -rm -f *.o
+
+This causes 'make' to continue even if 'rm' is unable to remove a file.
+
+   When you run 'make' with the '-i' or '--ignore-errors' flag, errors
+are ignored in all recipes of all rules.  A rule in the makefile for the
+special target '.IGNORE' has the same effect, if there are no
+prerequisites.  These ways of ignoring errors are obsolete because '-'
+is more flexible.
+
+   When errors are to be ignored, because of either a '-' or the '-i'
+flag, 'make' treats an error return just like success, except that it
+prints out a message that tells you the status code the shell exited
+with, and says that the error has been ignored.
+
+   When an error happens that 'make' has not been told to ignore, it
+implies that the current target cannot be correctly remade, and neither
+can any other that depends on it either directly or indirectly.  No
+further recipes will be executed for these targets, since their
+preconditions have not been achieved.
+
+   Normally 'make' gives up immediately in this circumstance, returning
+a nonzero status.  However, if the '-k' or '--keep-going' flag is
+specified, 'make' continues to consider the other prerequisites of the
+pending targets, remaking them if necessary, before it gives up and
+returns nonzero status.  For example, after an error in compiling one
+object file, 'make -k' will continue compiling other object files even
+though it already knows that linking them will be impossible.  *Note
+Summary of Options: Options Summary.
+
+   The usual behavior assumes that your purpose is to get the specified
+targets up to date; once 'make' learns that this is impossible, it might
+as well report the failure immediately.  The '-k' option says that the
+real purpose is to test as many of the changes made in the program as
+possible, perhaps to find several independent problems so that you can
+correct them all before the next attempt to compile.  This is why Emacs'
+'compile' command passes the '-k' flag by default.
+
+   Usually when a recipe line fails, if it has changed the target file
+at all, the file is corrupted and cannot be used--or at least it is not
+completely updated.  Yet the file's time stamp says that it is now up to
+date, so the next time 'make' runs, it will not try to update that file.
+The situation is just the same as when the shell is killed by a signal;
+*note Interrupts::.  So generally the right thing to do is to delete the
+target file if the recipe fails after beginning to change the file.
+'make' will do this if '.DELETE_ON_ERROR' appears as a target.  This is
+almost always what you want 'make' to do, but it is not historical
+practice; so for compatibility, you must explicitly request it.
+
+
+File: make.info,  Node: Interrupts,  Next: Recursion,  Prev: Errors,  Up: Recipes
+
+5.6 Interrupting or Killing 'make'
+==================================
+
+If 'make' gets a fatal signal while a shell is executing, it may delete
+the target file that the recipe was supposed to update.  This is done if
+the target file's last-modification time has changed since 'make' first
+checked it.
+
+   The purpose of deleting the target is to make sure that it is remade
+from scratch when 'make' is next run.  Why is this?  Suppose you type
+'Ctrl-c' while a compiler is running, and it has begun to write an
+object file 'foo.o'.  The 'Ctrl-c' kills the compiler, resulting in an
+incomplete file whose last-modification time is newer than the source
+file 'foo.c'.  But 'make' also receives the 'Ctrl-c' signal and deletes
+this incomplete file.  If 'make' did not do this, the next invocation of
+'make' would think that 'foo.o' did not require updating--resulting in a
+strange error message from the linker when it tries to link an object
+file half of which is missing.
+
+   You can prevent the deletion of a target file in this way by making
+the special target '.PRECIOUS' depend on it.  Before remaking a target,
+'make' checks to see whether it appears on the prerequisites of
+'.PRECIOUS', and thereby decides whether the target should be deleted if
+a signal happens.  Some reasons why you might do this are that the
+target is updated in some atomic fashion, or exists only to record a
+modification-time (its contents do not matter), or must exist at all
+times to prevent other sorts of trouble.
+
+
+File: make.info,  Node: Recursion,  Next: Canned Recipes,  Prev: Interrupts,  Up: Recipes
+
+5.7 Recursive Use of 'make'
+===========================
+
+Recursive use of 'make' means using 'make' as a command in a makefile.
+This technique is useful when you want separate makefiles for various
+subsystems that compose a larger system.  For example, suppose you have
+a sub-directory 'subdir' which has its own makefile, and you would like
+the containing directory's makefile to run 'make' on the sub-directory.
+You can do it by writing this:
+
+     subsystem:
+             cd subdir && $(MAKE)
+
+or, equivalently, this (*note Summary of Options: Options Summary.):
+
+     subsystem:
+             $(MAKE) -C subdir
+
+   You can write recursive 'make' commands just by copying this example,
+but there are many things to know about how they work and why, and about
+how the sub-'make' relates to the top-level 'make'.  You may also find
+it useful to declare targets that invoke recursive 'make' commands as
+'.PHONY' (for more discussion on when this is useful, see *note Phony
+Targets::).
+
+   For your convenience, when GNU 'make' starts (after it has processed
+any '-C' options) it sets the variable 'CURDIR' to the pathname of the
+current working directory.  This value is never touched by 'make' again:
+in particular note that if you include files from other directories the
+value of 'CURDIR' does not change.  The value has the same precedence it
+would have if it were set in the makefile (by default, an environment
+variable 'CURDIR' will not override this value).  Note that setting this
+variable has no impact on the operation of 'make' (it does not cause
+'make' to change its working directory, for example).
+
+* Menu:
+
+* MAKE Variable::               The special effects of using '$(MAKE)'.
+* Variables/Recursion::         How to communicate variables to a sub-'make'.
+* Options/Recursion::           How to communicate options to a sub-'make'.
+* -w Option::                   How the '-w' or '--print-directory' option
+                                  helps debug use of recursive 'make' commands.
+
+
+File: make.info,  Node: MAKE Variable,  Next: Variables/Recursion,  Prev: Recursion,  Up: Recursion
+
+5.7.1 How the 'MAKE' Variable Works
+-----------------------------------
+
+Recursive 'make' commands should always use the variable 'MAKE', not the
+explicit command name 'make', as shown here:
+
+     subsystem:
+             cd subdir && $(MAKE)
+
+   The value of this variable is the file name with which 'make' was
+invoked.  If this file name was '/bin/make', then the recipe executed is
+'cd subdir && /bin/make'.  If you use a special version of 'make' to run
+the top-level makefile, the same special version will be executed for
+recursive invocations.
+
+   As a special feature, using the variable 'MAKE' in the recipe of a
+rule alters the effects of the '-t' ('--touch'), '-n' ('--just-print'),
+or '-q' ('--question') option.  Using the 'MAKE' variable has the same
+effect as using a '+' character at the beginning of the recipe line.
+*Note Instead of Executing the Recipes: Instead of Execution.  This
+special feature is only enabled if the 'MAKE' variable appears directly
+in the recipe: it does not apply if the 'MAKE' variable is referenced
+through expansion of another variable.  In the latter case you must use
+the '+' token to get these special effects.
+
+   Consider the command 'make -t' in the above example.  (The '-t'
+option marks targets as up to date without actually running any recipes;
+see *note Instead of Execution::.)  Following the usual definition of
+'-t', a 'make -t' command in the example would create a file named
+'subsystem' and do nothing else.  What you really want it to do is run 'cd subdir &&
+make -t'; but that would require executing the recipe, and '-t' says not
+to execute recipes.
+
+   The special feature makes this do what you want: whenever a recipe
+line of a rule contains the variable 'MAKE', the flags '-t', '-n' and
+'-q' do not apply to that line.  Recipe lines containing 'MAKE' are
+executed normally despite the presence of a flag that causes most
+recipes not to be run.  The usual 'MAKEFLAGS' mechanism passes the flags
+to the sub-'make' (*note Communicating Options to a Sub-'make':
+Options/Recursion.), so your request to touch the files, or print the
+recipes, is propagated to the subsystem.
+
+
+File: make.info,  Node: Variables/Recursion,  Next: Options/Recursion,  Prev: MAKE Variable,  Up: Recursion
+
+5.7.2 Communicating Variables to a Sub-'make'
+---------------------------------------------
+
+Variable values of the top-level 'make' can be passed to the sub-'make'
+through the environment by explicit request.  These variables are
+defined in the sub-'make' as defaults, but they do not override
+variables defined in the makefile used by the sub-'make' unless you use
+the '-e' switch (*note Summary of Options: Options Summary.).
+
+   To pass down, or "export", a variable, 'make' adds the variable and
+its value to the environment for running each line of the recipe.  The
+sub-'make', in turn, uses the environment to initialize its table of
+variable values.  *Note Variables from the Environment: Environment.
+
+   Except by explicit request, 'make' exports a variable only if it is
+either defined in the environment initially or set on the command line,
+and if its name consists only of letters, numbers, and underscores.
+Some shells cannot cope with environment variable names consisting of
+characters other than letters, numbers, and underscores.
+
+   The value of the 'make' variable 'SHELL' is not exported.  Instead,
+the value of the 'SHELL' variable from the invoking environment is
+passed to the sub-'make'.  You can force 'make' to export its value for
+'SHELL' by using the 'export' directive, described below.  *Note
+Choosing the Shell::.
+
+   The special variable 'MAKEFLAGS' is always exported (unless you
+unexport it).  'MAKEFILES' is exported if you set it to anything.
+
+   'make' automatically passes down variable values that were defined on
+the command line, by putting them in the 'MAKEFLAGS' variable.  *Note
+Options/Recursion::.
+
+   Variables are _not_ normally passed down if they were created by
+default by 'make' (*note Variables Used by Implicit Rules: Implicit
+Variables.).  The sub-'make' will define these for itself.
+
+   If you want to export specific variables to a sub-'make', use the
+'export' directive, like this:
+
+     export VARIABLE ...
+
+If you want to _prevent_ a variable from being exported, use the
+'unexport' directive, like this:
+
+     unexport VARIABLE ...
+
+In both of these forms, the arguments to 'export' and 'unexport' are
+expanded, and so could be variables or functions which expand to a (list
+of) variable names to be (un)exported.
+
+   As a convenience, you can define a variable and export it at the same
+time by doing:
+
+     export VARIABLE = value
+
+has the same result as:
+
+     VARIABLE = value
+     export VARIABLE
+
+and
+
+     export VARIABLE := value
+
+has the same result as:
+
+     VARIABLE := value
+     export VARIABLE
+
+   Likewise,
+
+     export VARIABLE += value
+
+is just like:
+
+     VARIABLE += value
+     export VARIABLE
+
+*Note Appending More Text to Variables: Appending.
+
+   You may notice that the 'export' and 'unexport' directives work in
+'make' in the same way they work in the shell, 'sh'.
+
+   If you want all variables to be exported by default, you can use
+'export' by itself:
+
+     export
+
+This tells 'make' that variables which are not explicitly mentioned in
+an 'export' or 'unexport' directive should be exported.  Any variable
+given in an 'unexport' directive will still _not_ be exported.  If you
+use 'export' by itself to export variables by default, variables whose
+names contain characters other than alphanumerics and underscores will
+not be exported unless specifically mentioned in an 'export' directive.
+
+   The behavior elicited by an 'export' directive by itself was the
+default in older versions of GNU 'make'.  If your makefiles depend on
+this behavior and you want to be compatible with old versions of 'make',
+you can write a rule for the special target '.EXPORT_ALL_VARIABLES'
+instead of using the 'export' directive.  This will be ignored by old
+'make's, while the 'export' directive will cause a syntax error.
+
+   Likewise, you can use 'unexport' by itself to tell 'make' _not_ to
+export variables by default.  Since this is the default behavior, you
+would only need to do this if 'export' had been used by itself earlier
+(in an included makefile, perhaps).  You *cannot* use 'export' and
+'unexport' by themselves to have variables exported for some recipes and
+not for others.  The last 'export' or 'unexport' directive that appears
+by itself determines the behavior for the entire run of 'make'.
+
+   As a special feature, the variable 'MAKELEVEL' is changed when it is
+passed down from level to level.  This variable's value is a string
+which is the depth of the level as a decimal number.  The value is '0'
+for the top-level 'make'; '1' for a sub-'make', '2' for a
+sub-sub-'make', and so on.  The incrementation happens when 'make' sets
+up the environment for a recipe.
+
+   The main use of 'MAKELEVEL' is to test it in a conditional directive
+(*note Conditional Parts of Makefiles: Conditionals.); this way you can
+write a makefile that behaves one way if run recursively and another way
+if run directly by you.
+
+   You can use the variable 'MAKEFILES' to cause all sub-'make' commands
+to use additional makefiles.  The value of 'MAKEFILES' is a
+whitespace-separated list of file names.  This variable, if defined in
+the outer-level makefile, is passed down through the environment; then
+it serves as a list of extra makefiles for the sub-'make' to read before
+the usual or specified ones.  *Note The Variable 'MAKEFILES': MAKEFILES
+Variable.
+
+
+File: make.info,  Node: Options/Recursion,  Next: -w Option,  Prev: Variables/Recursion,  Up: Recursion
+
+5.7.3 Communicating Options to a Sub-'make'
+-------------------------------------------
+
+Flags such as '-s' and '-k' are passed automatically to the sub-'make'
+through the variable 'MAKEFLAGS'.  This variable is set up automatically
+by 'make' to contain the flag letters that 'make' received.  Thus, if
+you do 'make -ks' then 'MAKEFLAGS' gets the value 'ks'.
+
+   As a consequence, every sub-'make' gets a value for 'MAKEFLAGS' in
+its environment.  In response, it takes the flags from that value and
+processes them as if they had been given as arguments.  *Note Summary of
+Options: Options Summary.
+
+   Likewise variables defined on the command line are passed to the
+sub-'make' through 'MAKEFLAGS'.  Words in the value of 'MAKEFLAGS' that
+contain '=', 'make' treats as variable definitions just as if they
+appeared on the command line.  *Note Overriding Variables: Overriding.
+
+   The options '-C', '-f', '-o', and '-W' are not put into 'MAKEFLAGS';
+these options are not passed down.
+
+   The '-j' option is a special case (*note Parallel Execution:
+Parallel.).  If you set it to some numeric value 'N' and your operating
+system supports it (most any UNIX system will; others typically won't),
+the parent 'make' and all the sub-'make's will communicate to ensure
+that there are only 'N' jobs running at the same time between them all.
+Note that any job that is marked recursive (*note Instead of Executing
+Recipes: Instead of Execution.) doesn't count against the total jobs
+(otherwise we could get 'N' sub-'make's running and have no slots left
+over for any real work!)
+
+   If your operating system doesn't support the above communication,
+then '-j 1' is always put into 'MAKEFLAGS' instead of the value you
+specified.  This is because if the '-j' option were passed down to
+sub-'make's, you would get many more jobs running in parallel than you
+asked for.  If you give '-j' with no numeric argument, meaning to run as
+many jobs as possible in parallel, this is passed down, since multiple
+infinities are no more than one.
+
+   If you do not want to pass the other flags down, you must change the
+value of 'MAKEFLAGS', like this:
+
+     subsystem:
+             cd subdir && $(MAKE) MAKEFLAGS=
+
+   The command line variable definitions really appear in the variable
+'MAKEOVERRIDES', and 'MAKEFLAGS' contains a reference to this variable.
+If you do want to pass flags down normally, but don't want to pass down
+the command line variable definitions, you can reset 'MAKEOVERRIDES' to
+empty, like this:
+
+     MAKEOVERRIDES =
+
+This is not usually useful to do.  However, some systems have a small
+fixed limit on the size of the environment, and putting so much
+information into the value of 'MAKEFLAGS' can exceed it.  If you see the
+error message 'Arg list too long', this may be the problem.  (For strict
+compliance with POSIX.2, changing 'MAKEOVERRIDES' does not affect
+'MAKEFLAGS' if the special target '.POSIX' appears in the makefile.  You
+probably do not care about this.)
+
+   A similar variable 'MFLAGS' exists also, for historical
+compatibility.  It has the same value as 'MAKEFLAGS' except that it does
+not contain the command line variable definitions, and it always begins
+with a hyphen unless it is empty ('MAKEFLAGS' begins with a hyphen only
+when it begins with an option that has no single-letter version, such as
+'--warn-undefined-variables').  'MFLAGS' was traditionally used
+explicitly in the recursive 'make' command, like this:
+
+     subsystem:
+             cd subdir && $(MAKE) $(MFLAGS)
+
+but now 'MAKEFLAGS' makes this usage redundant.  If you want your
+makefiles to be compatible with old 'make' programs, use this technique;
+it will work fine with more modern 'make' versions too.
+
+   The 'MAKEFLAGS' variable can also be useful if you want to have
+certain options, such as '-k' (*note Summary of Options: Options
+Summary.), set each time you run 'make'.  You simply put a value for
+'MAKEFLAGS' in your environment.  You can also set 'MAKEFLAGS' in a
+makefile, to specify additional flags that should also be in effect for
+that makefile.  (Note that you cannot use 'MFLAGS' this way.  That
+variable is set only for compatibility; 'make' does not interpret a
+value you set for it in any way.)
+
+   When 'make' interprets the value of 'MAKEFLAGS' (either from the
+environment or from a makefile), it first prepends a hyphen if the value
+does not already begin with one.  Then it chops the value into words
+separated by blanks, and parses these words as if they were options
+given on the command line (except that '-C', '-f', '-h', '-o', '-W', and
+their long-named versions are ignored; and there is no error for an
+invalid option).
+
+   If you do put 'MAKEFLAGS' in your environment, you should be sure not
+to include any options that will drastically affect the actions of
+'make' and undermine the purpose of makefiles and of 'make' itself.  For
+instance, the '-t', '-n', and '-q' options, if put in one of these
+variables, could have disastrous consequences and would certainly have
+at least surprising and probably annoying effects.
+
+   If you'd like to run other implementations of 'make' in addition to
+GNU 'make', and hence do not want to add GNU 'make'-specific flags to
+the 'MAKEFLAGS' variable, you can add them to the 'GNUMAKEFLAGS'
+variable instead.  This variable is parsed just before 'MAKEFLAGS', in
+the same way as 'MAKEFLAGS'.  When 'make' constructs 'MAKEFLAGS' to pass
+to a recursive 'make' it will include all flags, even those taken from
+'GNUMAKEFLAGS'.  As a result, after parsing 'GNUMAKEFLAGS' GNU 'make'
+sets this variable to the empty string to avoid duplicating flags during
+recursion.
+
+   It's best to use 'GNUMAKEFLAGS' only with flags which won't
+materially change the behavior of your makefiles.  If your makefiles
+require GNU make anyway then simply use 'MAKEFLAGS'.  Flags such as
+'--no-print-directory' or '--output-sync' may be appropriate for
+'GNUMAKEFLAGS'.
+
+
+File: make.info,  Node: -w Option,  Prev: Options/Recursion,  Up: Recursion
+
+5.7.4 The '--print-directory' Option
+------------------------------------
+
+If you use several levels of recursive 'make' invocations, the '-w' or '--print-directory'
+option can make the output a lot easier to understand by showing each
+directory as 'make' starts processing it and as 'make' finishes
+processing it.  For example, if 'make -w' is run in the directory
+'/u/gnu/make', 'make' will print a line of the form:
+
+     make: Entering directory `/u/gnu/make'.
+
+before doing anything else, and a line of the form:
+
+     make: Leaving directory `/u/gnu/make'.
+
+when processing is completed.
+
+   Normally, you do not need to specify this option because 'make' does
+it for you: '-w' is turned on automatically when you use the '-C'
+option, and in sub-'make's.  'make' will not automatically turn on '-w'
+if you also use '-s', which says to be silent, or if you use
+'--no-print-directory' to explicitly disable it.
+
+
+File: make.info,  Node: Canned Recipes,  Next: Empty Recipes,  Prev: Recursion,  Up: Recipes
+
+5.8 Defining Canned Recipes
+===========================
+
+When the same sequence of commands is useful in making various targets,
+you can define it as a canned sequence with the 'define' directive, and
+refer to the canned sequence from the recipes for those targets.  The
+canned sequence is actually a variable, so the name must not conflict
+with other variable names.
+
+   Here is an example of defining a canned recipe:
+
+     define run-yacc =
+     yacc $(firstword $^)
+     mv y.tab.c $@
+     endef
+
+Here 'run-yacc' is the name of the variable being defined; 'endef' marks
+the end of the definition; the lines in between are the commands.  The
+'define' directive does not expand variable references and function
+calls in the canned sequence; the '$' characters, parentheses, variable
+names, and so on, all become part of the value of the variable you are
+defining.  *Note Defining Multi-Line Variables: Multi-Line, for a
+complete explanation of 'define'.
+
+   The first command in this example runs Yacc on the first prerequisite
+of whichever rule uses the canned sequence.  The output file from Yacc
+is always named 'y.tab.c'.  The second command moves the output to the
+rule's target file name.
+
+   To use the canned sequence, substitute the variable into the recipe
+of a rule.  You can substitute it like any other variable (*note Basics
+of Variable References: Reference.).  Because variables defined by
+'define' are recursively expanded variables, all the variable references
+you wrote inside the 'define' are expanded now.  For example:
+
+     foo.c : foo.y
+             $(run-yacc)
+
+'foo.y' will be substituted for the variable '$^' when it occurs in
+'run-yacc''s value, and 'foo.c' for '$@'.
+
+   This is a realistic example, but this particular one is not needed in
+practice because 'make' has an implicit rule to figure out these
+commands based on the file names involved (*note Using Implicit Rules:
+Implicit Rules.).
+
+   In recipe execution, each line of a canned sequence is treated just
+as if the line appeared on its own in the rule, preceded by a tab.  In
+particular, 'make' invokes a separate sub-shell for each line.  You can
+use the special prefix characters that affect command lines ('@', '-',
+and '+') on each line of a canned sequence.  *Note Writing Recipes in
+Rules: Recipes.  For example, using this canned sequence:
+
+     define frobnicate =
+     @echo "frobnicating target $@"
+     frob-step-1 $< -o $@-step-1
+     frob-step-2 $@-step-1 -o $@
+     endef
+
+'make' will not echo the first line, the 'echo' command.  But it _will_
+echo the following two recipe lines.
+
+   On the other hand, prefix characters on the recipe line that refers
+to a canned sequence apply to every line in the sequence.  So the rule:
+
+     frob.out: frob.in
+             @$(frobnicate)
+
+does not echo _any_ recipe lines.  (*Note Recipe Echoing: Echoing, for a
+full explanation of '@'.)
+
+
+File: make.info,  Node: Empty Recipes,  Prev: Canned Recipes,  Up: Recipes
+
+5.9 Using Empty Recipes
+=======================
+
+It is sometimes useful to define recipes which do nothing.  This is done
+simply by giving a recipe that consists of nothing but whitespace.  For
+example:
+
+     target: ;
+
+defines an empty recipe for 'target'.  You could also use a line
+beginning with a recipe prefix character to define an empty recipe, but
+this would be confusing because such a line looks empty.
+
+   You may be wondering why you would want to define a recipe that does
+nothing.  The only reason this is useful is to prevent a target from
+getting implicit recipes (from implicit rules or the '.DEFAULT' special
+target; *note Implicit Rules:: and *note Defining Last-Resort Default
+Rules: Last Resort.).
+
+   You may be inclined to define empty recipes for targets that are not
+actual files, but only exist so that their prerequisites can be remade.
+However, this is not the best way to do that, because the prerequisites
+may not be remade properly if the target file actually does exist.
+*Note Phony Targets: Phony Targets, for a better way to do this.
+
+
+File: make.info,  Node: Using Variables,  Next: Conditionals,  Prev: Recipes,  Up: Top
+
+6 How to Use Variables
+**********************
+
+A "variable" is a name defined in a makefile to represent a string of
+text, called the variable's "value".  These values are substituted by
+explicit request into targets, prerequisites, recipes, and other parts
+of the makefile.  (In some other versions of 'make', variables are
+called "macros".)
+
+   Variables and functions in all parts of a makefile are expanded when
+read, except for in recipes, the right-hand sides of variable
+definitions using '=', and the bodies of variable definitions using the
+'define' directive.
+
+   Variables can represent lists of file names, options to pass to
+compilers, programs to run, directories to look in for source files,
+directories to write output in, or anything else you can imagine.
+
+   A variable name may be any sequence of characters not containing ':',
+'#', '=', or whitespace.  However, variable names containing characters
+other than letters, numbers, and underscores should be considered
+carefully, as in some shells they cannot be passed through the
+environment to a sub-'make' (*note Communicating Variables to a
+Sub-'make': Variables/Recursion.).  Variable names beginning with '.'
+and an uppercase letter may be given special meaning in future versions
+of 'make'.
+
+   Variable names are case-sensitive.  The names 'foo', 'FOO', and 'Foo'
+all refer to different variables.
+
+   It is traditional to use upper case letters in variable names, but we
+recommend using lower case letters for variable names that serve
+internal purposes in the makefile, and reserving upper case for
+parameters that control implicit rules or for parameters that the user
+should override with command options (*note Overriding Variables:
+Overriding.).
+
+   A few variables have names that are a single punctuation character or
+just a few characters.  These are the "automatic variables", and they
+have particular specialized uses.  *Note Automatic Variables::.
+
+* Menu:
+
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+
+
+File: make.info,  Node: Reference,  Next: Flavors,  Prev: Using Variables,  Up: Using Variables
+
+6.1 Basics of Variable References
+=================================
+
+To substitute a variable's value, write a dollar sign followed by the
+name of the variable in parentheses or braces: either '$(foo)' or
+'${foo}' is a valid reference to the variable 'foo'.  This special
+significance of '$' is why you must write '$$' to have the effect of a
+single dollar sign in a file name or recipe.
+
+   Variable references can be used in any context: targets,
+prerequisites, recipes, most directives, and new variable values.  Here
+is an example of a common case, where a variable holds the names of all
+the object files in a program:
+
+     objects = program.o foo.o utils.o
+     program : $(objects)
+             cc -o program $(objects)
+
+     $(objects) : defs.h
+
+   Variable references work by strict textual substitution.  Thus, the
+rule
+
+     foo = c
+     prog.o : prog.$(foo)
+             $(foo)$(foo) -$(foo) prog.$(foo)
+
+could be used to compile a C program 'prog.c'.  Since spaces before the
+variable value are ignored in variable assignments, the value of 'foo'
+is precisely 'c'.  (Don't actually write your makefiles this way!)
+
+   A dollar sign followed by a character other than a dollar sign,
+open-parenthesis or open-brace treats that single character as the
+variable name.  Thus, you could reference the variable 'x' with '$x'.
+However, this practice is strongly discouraged, except in the case of
+the automatic variables (*note Automatic Variables::).
+
+
+File: make.info,  Node: Flavors,  Next: Advanced,  Prev: Reference,  Up: Using Variables
+
+6.2 The Two Flavors of Variables
+================================
+
+There are two ways that a variable in GNU 'make' can have a value; we
+call them the two "flavors" of variables.  The two flavors are
+distinguished in how they are defined and in what they do when expanded.
+
+   The first flavor of variable is a "recursively expanded" variable.
+Variables of this sort are defined by lines using '=' (*note Setting
+Variables: Setting.) or by the 'define' directive (*note Defining
+Multi-Line Variables: Multi-Line.).  The value you specify is installed
+verbatim; if it contains references to other variables, these references
+are expanded whenever this variable is substituted (in the course of
+expanding some other string).  When this happens, it is called
+"recursive expansion".
+
+   For example,
+
+     foo = $(bar)
+     bar = $(ugh)
+     ugh = Huh?
+
+     all:;echo $(foo)
+
+will echo 'Huh?': '$(foo)' expands to '$(bar)' which expands to '$(ugh)'
+which finally expands to 'Huh?'.
+
+   This flavor of variable is the only sort supported by most other
+versions of 'make'.  It has its advantages and its disadvantages.  An
+advantage (most would say) is that:
+
+     CFLAGS = $(include_dirs) -O
+     include_dirs = -Ifoo -Ibar
+
+will do what was intended: when 'CFLAGS' is expanded in a recipe, it
+will expand to '-Ifoo -Ibar -O'.  A major disadvantage is that you
+cannot append something on the end of a variable, as in
+
+     CFLAGS = $(CFLAGS) -O
+
+because it will cause an infinite loop in the variable expansion.
+(Actually 'make' detects the infinite loop and reports an error.)
+
+   Another disadvantage is that any functions (*note Functions for
+Transforming Text: Functions.) referenced in the definition will be
+executed every time the variable is expanded.  This makes 'make' run
+slower; worse, it causes the 'wildcard' and 'shell' functions to give
+unpredictable results because you cannot easily control when they are
+called, or even how many times.
+
+   To avoid all the problems and inconveniences of recursively expanded
+variables, there is another flavor: simply expanded variables.
+
+   "Simply expanded variables" are defined by lines using ':=' or '::='
+(*note Setting Variables: Setting.).  Both forms are equivalent in GNU
+'make'; however only the '::=' form is described by the POSIX standard
+(support for '::=' was added to the POSIX standard in 2012, so older
+versions of 'make' won't accept this form either).
+
+   The value of a simply expanded variable is scanned once and for all,
+expanding any references to other variables and functions, when the
+variable is defined.  The actual value of the simply expanded variable
+is the result of expanding the text that you write.  It does not contain
+any references to other variables; it contains their values _as of the
+time this variable was defined_.  Therefore,
+
+     x := foo
+     y := $(x) bar
+     x := later
+
+is equivalent to
+
+     y := foo bar
+     x := later
+
+   When a simply expanded variable is referenced, its value is
+substituted verbatim.
+
+   Here is a somewhat more complicated example, illustrating the use of
+':=' in conjunction with the 'shell' function.  (*Note The 'shell'
+Function: Shell Function.)  This example also shows use of the variable
+'MAKELEVEL', which is changed when it is passed down from level to
+level.  (*Note Communicating Variables to a Sub-'make':
+Variables/Recursion, for information about 'MAKELEVEL'.)
+
+     ifeq (0,${MAKELEVEL})
+     whoami    := $(shell whoami)
+     host-type := $(shell arch)
+     MAKE := ${MAKE} host-type=${host-type} whoami=${whoami}
+     endif
+
+An advantage of this use of ':=' is that a typical 'descend into a
+directory' recipe then looks like this:
+
+     ${subdirs}:
+             ${MAKE} -C $@ all
+
+   Simply expanded variables generally make complicated makefile
+programming more predictable because they work like variables in most
+programming languages.  They allow you to redefine a variable using its
+own value (or its value processed in some way by one of the expansion
+functions) and to use the expansion functions much more efficiently
+(*note Functions for Transforming Text: Functions.).
+
+   You can also use them to introduce controlled leading whitespace into
+variable values.  Leading whitespace characters are discarded from your
+input before substitution of variable references and function calls;
+this means you can include leading spaces in a variable value by
+protecting them with variable references, like this:
+
+     nullstring :=
+     space := $(nullstring) # end of the line
+
+Here the value of the variable 'space' is precisely one space.  The
+comment '# end of the line' is included here just for clarity.  Since
+trailing space characters are _not_ stripped from variable values, just
+a space at the end of the line would have the same effect (but be rather
+hard to read).  If you put whitespace at the end of a variable value, it
+is a good idea to put a comment like that at the end of the line to make
+your intent clear.  Conversely, if you do _not_ want any whitespace
+characters at the end of your variable value, you must remember not to
+put a random comment on the end of the line after some whitespace, such
+as this:
+
+     dir := /foo/bar    # directory to put the frobs in
+
+Here the value of the variable 'dir' is '/foo/bar    ' (with four
+trailing spaces), which was probably not the intention.  (Imagine
+something like '$(dir)/file' with this definition!)
+
+   There is another assignment operator for variables, '?='.  This is
+called a conditional variable assignment operator, because it only has
+an effect if the variable is not yet defined.  This statement:
+
+     FOO ?= bar
+
+is exactly equivalent to this (*note The 'origin' Function: Origin
+Function.):
+
+     ifeq ($(origin FOO), undefined)
+       FOO = bar
+     endif
+
+   Note that a variable set to an empty value is still defined, so '?='
+will not set that variable.
+
+
+File: make.info,  Node: Advanced,  Next: Values,  Prev: Flavors,  Up: Using Variables
+
+6.3 Advanced Features for Reference to Variables
+================================================
+
+This section describes some advanced features you can use to reference
+variables in more flexible ways.
+
+* Menu:
+
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+
+
+File: make.info,  Node: Substitution Refs,  Next: Computed Names,  Prev: Advanced,  Up: Advanced
+
+6.3.1 Substitution References
+-----------------------------
+
+A "substitution reference" substitutes the value of a variable with
+alterations that you specify.  It has the form '$(VAR:A=B)' (or
+'${VAR:A=B}') and its meaning is to take the value of the variable VAR,
+replace every A at the end of a word with B in that value, and
+substitute the resulting string.
+
+   When we say "at the end of a word", we mean that A must appear either
+followed by whitespace or at the end of the value in order to be
+replaced; other occurrences of A in the value are unaltered.  For
+example:
+
+     foo := a.o b.o c.o
+     bar := $(foo:.o=.c)
+
+sets 'bar' to 'a.c b.c c.c'.  *Note Setting Variables: Setting.
+
+   A substitution reference is actually an abbreviation for use of the
+'patsubst' expansion function (*note Functions for String Substitution
+and Analysis: Text Functions.).  We provide substitution references as
+well as 'patsubst' for compatibility with other implementations of
+'make'.
+
+   Another type of substitution reference lets you use the full power of
+the 'patsubst' function.  It has the same form '$(VAR:A=B)' described
+above, except that now A must contain a single '%' character.  This case
+is equivalent to '$(patsubst A,B,$(VAR))'.  *Note Functions for String
+Substitution and Analysis: Text Functions, for a description of the
+'patsubst' function.
+
+For example:
+
+     foo := a.o b.o c.o
+     bar := $(foo:%.o=%.c)
+
+sets 'bar' to 'a.c b.c c.c'.
+
+
+File: make.info,  Node: Computed Names,  Prev: Substitution Refs,  Up: Advanced
+
+6.3.2 Computed Variable Names
+-----------------------------
+
+Computed variable names are a complicated concept needed only for
+sophisticated makefile programming.  For most purposes you need not
+consider them, except to know that making a variable with a dollar sign
+in its name might have strange results.  However, if you are the type
+that wants to understand everything, or you are actually interested in
+what they do, read on.
+
+   Variables may be referenced inside the name of a variable.  This is
+called a "computed variable name" or a "nested variable reference".  For
+example,
+
+     x = y
+     y = z
+     a := $($(x))
+
+defines 'a' as 'z': the '$(x)' inside '$($(x))' expands to 'y', so
+'$($(x))' expands to '$(y)' which in turn expands to 'z'.  Here the name
+of the variable to reference is not stated explicitly; it is computed by
+expansion of '$(x)'.  The reference '$(x)' here is nested within the
+outer variable reference.
+
+   The previous example shows two levels of nesting, but any number of
+levels is possible.  For example, here are three levels:
+
+     x = y
+     y = z
+     z = u
+     a := $($($(x)))
+
+Here the innermost '$(x)' expands to 'y', so '$($(x))' expands to '$(y)'
+which in turn expands to 'z'; now we have '$(z)', which becomes 'u'.
+
+   References to recursively-expanded variables within a variable name
+are re-expanded in the usual fashion.  For example:
+
+     x = $(y)
+     y = z
+     z = Hello
+     a := $($(x))
+
+defines 'a' as 'Hello': '$($(x))' becomes '$($(y))' which becomes '$(z)'
+which becomes 'Hello'.
+
+   Nested variable references can also contain modified references and
+function invocations (*note Functions for Transforming Text:
+Functions.), just like any other reference.  For example, using the
+'subst' function (*note Functions for String Substitution and Analysis:
+Text Functions.):
+
+     x = variable1
+     variable2 := Hello
+     y = $(subst 1,2,$(x))
+     z = y
+     a := $($($(z)))
+
+eventually defines 'a' as 'Hello'.  It is doubtful that anyone would
+ever want to write a nested reference as convoluted as this one, but it
+works: '$($($(z)))' expands to '$($(y))' which becomes '$($(subst
+1,2,$(x)))'.  This gets the value 'variable1' from 'x' and changes it by
+substitution to 'variable2', so that the entire string becomes
+'$(variable2)', a simple variable reference whose value is 'Hello'.
+
+   A computed variable name need not consist entirely of a single
+variable reference.  It can contain several variable references, as well
+as some invariant text.  For example,
+
+     a_dirs := dira dirb
+     1_dirs := dir1 dir2
+
+     a_files := filea fileb
+     1_files := file1 file2
+
+     ifeq "$(use_a)" "yes"
+     a1 := a
+     else
+     a1 := 1
+     endif
+
+     ifeq "$(use_dirs)" "yes"
+     df := dirs
+     else
+     df := files
+     endif
+
+     dirs := $($(a1)_$(df))
+
+will give 'dirs' the same value as 'a_dirs', '1_dirs', 'a_files' or
+'1_files' depending on the settings of 'use_a' and 'use_dirs'.
+
+   Computed variable names can also be used in substitution references:
+
+     a_objects := a.o b.o c.o
+     1_objects := 1.o 2.o 3.o
+
+     sources := $($(a1)_objects:.o=.c)
+
+defines 'sources' as either 'a.c b.c c.c' or '1.c 2.c 3.c', depending on
+the value of 'a1'.
+
+   The only restriction on this sort of use of nested variable
+references is that they cannot specify part of the name of a function to
+be called.  This is because the test for a recognized function name is
+done before the expansion of nested references.  For example,
+
+     ifdef do_sort
+     func := sort
+     else
+     func := strip
+     endif
+
+     bar := a d b g q c
+
+     foo := $($(func) $(bar))
+
+attempts to give 'foo' the value of the variable 'sort a d b g q c' or
+'strip a d b g q c', rather than giving 'a d b g q c' as the argument to
+either the 'sort' or the 'strip' function.  This restriction could be
+removed in the future if that change is shown to be a good idea.
+
+   You can also use computed variable names in the left-hand side of a
+variable assignment, or in a 'define' directive, as in:
+
+     dir = foo
+     $(dir)_sources := $(wildcard $(dir)/*.c)
+     define $(dir)_print =
+     lpr $($(dir)_sources)
+     endef
+
+This example defines the variables 'dir', 'foo_sources', and
+'foo_print'.
+
+   Note that "nested variable references" are quite different from
+"recursively expanded variables" (*note The Two Flavors of Variables:
+Flavors.), though both are used together in complex ways when doing
+makefile programming.
+
+
+File: make.info,  Node: Values,  Next: Setting,  Prev: Advanced,  Up: Using Variables
+
+6.4 How Variables Get Their Values
+==================================
+
+Variables can get values in several different ways:
+
+   * You can specify an overriding value when you run 'make'.  *Note
+     Overriding Variables: Overriding.
+
+   * You can specify a value in the makefile, either with an assignment
+     (*note Setting Variables: Setting.) or with a verbatim definition
+     (*note Defining Multi-Line Variables: Multi-Line.).
+
+   * Variables in the environment become 'make' variables.  *Note
+     Variables from the Environment: Environment.
+
+   * Several "automatic" variables are given new values for each rule.
+     Each of these has a single conventional use.  *Note Automatic
+     Variables::.
+
+   * Several variables have constant initial values.  *Note Variables
+     Used by Implicit Rules: Implicit Variables.
+
+
+File: make.info,  Node: Setting,  Next: Appending,  Prev: Values,  Up: Using Variables
+
+6.5 Setting Variables
+=====================
+
+To set a variable from the makefile, write a line starting with the
+variable name followed by '=' ':=', or '::='.  Whatever follows the '=',
+':=', or '::=' on the line becomes the value.  For example,
+
+     objects = main.o foo.o bar.o utils.o
+
+defines a variable named 'objects'.  Whitespace around the variable name
+and immediately after the '=' is ignored.
+
+   Variables defined with '=' are "recursively expanded" variables.
+Variables defined with ':=' or '::=' are "simply expanded" variables;
+these definitions can contain variable references which will be expanded
+before the definition is made.  *Note The Two Flavors of Variables:
+Flavors.
+
+   The variable name may contain function and variable references, which
+are expanded when the line is read to find the actual variable name to
+use.
+
+   There is no limit on the length of the value of a variable except the
+amount of memory on the computer.  You can split the value of a variable
+into multiple physical lines for readability (*note Splitting Long
+Lines: Splitting Lines.).
+
+   Most variable names are considered to have the empty string as a
+value if you have never set them.  Several variables have built-in
+initial values that are not empty, but you can set them in the usual
+ways (*note Variables Used by Implicit Rules: Implicit Variables.).
+Several special variables are set automatically to a new value for each
+rule; these are called the "automatic" variables (*note Automatic
+Variables::).
+
+   If you'd like a variable to be set to a value only if it's not
+already set, then you can use the shorthand operator '?=' instead of
+'='.  These two settings of the variable 'FOO' are identical (*note The
+'origin' Function: Origin Function.):
+
+     FOO ?= bar
+
+and
+
+     ifeq ($(origin FOO), undefined)
+     FOO = bar
+     endif
+
+   The shell assignment operator '!=' can be used to execute a program
+and set a variable to its output.  This operator first evaluates the
+right-hand side, then passes that result to the shell for execution.  If
+the result of the execution ends in a newline, that one newline is
+removed; all other newlines are replaced by spaces.  The resulting
+string is then placed into the named recursively-expanded variable.  For
+example:
+
+     hash != printf '\043'
+     file_list != find . -name '*.c'
+
+   If the result of the execution could produce a '$', and you don't
+intend what follows that to be interpreted as a make variable or
+function reference, then you must replace every '$' with '$$' as part of
+the execution.  Alternatively, you can set a simply expanded variable to
+the result of running a program using the 'shell' function call.  *Note
+The 'shell' Function: Shell Function.  For example:
+
+     hash := $(shell printf '\043')
+     var := $(shell find . -name "*.c")
+
+
+File: make.info,  Node: Appending,  Next: Override Directive,  Prev: Setting,  Up: Using Variables
+
+6.6 Appending More Text to Variables
+====================================
+
+Often it is useful to add more text to the value of a variable already
+defined.  You do this with a line containing '+=', like this:
+
+     objects += another.o
+
+This takes the value of the variable 'objects', and adds the text
+'another.o' to it (preceded by a single space).  Thus:
+
+     objects = main.o foo.o bar.o utils.o
+     objects += another.o
+
+sets 'objects' to 'main.o foo.o bar.o utils.o another.o'.
+
+   Using '+=' is similar to:
+
+     objects = main.o foo.o bar.o utils.o
+     objects := $(objects) another.o
+
+but differs in ways that become important when you use more complex
+values.
+
+   When the variable in question has not been defined before, '+=' acts
+just like normal '=': it defines a recursively-expanded variable.
+However, when there _is_ a previous definition, exactly what '+=' does
+depends on what flavor of variable you defined originally.  *Note The
+Two Flavors of Variables: Flavors, for an explanation of the two flavors
+of variables.
+
+   When you add to a variable's value with '+=', 'make' acts essentially
+as if you had included the extra text in the initial definition of the
+variable.  If you defined it first with ':=' or '::=', making it a
+simply-expanded variable, '+=' adds to that simply-expanded definition,
+and expands the new text before appending it to the old value just as
+':=' does (see *note Setting Variables: Setting, for a full explanation
+of ':=' or '::=').  In fact,
+
+     variable := value
+     variable += more
+
+is exactly equivalent to:
+
+     variable := value
+     variable := $(variable) more
+
+   On the other hand, when you use '+=' with a variable that you defined
+first to be recursively-expanded using plain '=', 'make' does something
+a bit different.  Recall that when you define a recursively-expanded
+variable, 'make' does not expand the value you set for variable and
+function references immediately.  Instead it stores the text verbatim,
+and saves these variable and function references to be expanded later,
+when you refer to the new variable (*note The Two Flavors of Variables:
+Flavors.).  When you use '+=' on a recursively-expanded variable, it is
+this unexpanded text to which 'make' appends the new text you specify.
+
+     variable = value
+     variable += more
+
+is roughly equivalent to:
+
+     temp = value
+     variable = $(temp) more
+
+except that of course it never defines a variable called 'temp'.  The
+importance of this comes when the variable's old value contains variable
+references.  Take this common example:
+
+     CFLAGS = $(includes) -O
+     ...
+     CFLAGS += -pg # enable profiling
+
+The first line defines the 'CFLAGS' variable with a reference to another
+variable, 'includes'.  ('CFLAGS' is used by the rules for C compilation;
+*note Catalogue of Built-In Rules: Catalogue of Rules.)  Using '=' for
+the definition makes 'CFLAGS' a recursively-expanded variable, meaning '$(includes) -O'
+is _not_ expanded when 'make' processes the definition of 'CFLAGS'.
+Thus, 'includes' need not be defined yet for its value to take effect.
+It only has to be defined before any reference to 'CFLAGS'.  If we tried
+to append to the value of 'CFLAGS' without using '+=', we might do it
+like this:
+
+     CFLAGS := $(CFLAGS) -pg # enable profiling
+
+This is pretty close, but not quite what we want.  Using ':=' redefines
+'CFLAGS' as a simply-expanded variable; this means 'make' expands the
+text '$(CFLAGS) -pg' before setting the variable.  If 'includes' is not
+yet defined, we get ' -O -pg', and a later definition of 'includes' will
+have no effect.  Conversely, by using '+=' we set 'CFLAGS' to the
+_unexpanded_ value '$(includes) -O -pg'.  Thus we preserve the reference
+to 'includes', so if that variable gets defined at any later point, a
+reference like '$(CFLAGS)' still uses its value.
+
+
+File: make.info,  Node: Override Directive,  Next: Multi-Line,  Prev: Appending,  Up: Using Variables
+
+6.7 The 'override' Directive
+============================
+
+If a variable has been set with a command argument (*note Overriding
+Variables: Overriding.), then ordinary assignments in the makefile are
+ignored.  If you want to set the variable in the makefile even though it
+was set with a command argument, you can use an 'override' directive,
+which is a line that looks like this:
+
+     override VARIABLE = VALUE
+
+or
+
+     override VARIABLE := VALUE
+
+   To append more text to a variable defined on the command line, use:
+
+     override VARIABLE += MORE TEXT
+
+*Note Appending More Text to Variables: Appending.
+
+   Variable assignments marked with the 'override' flag have a higher
+priority than all other assignments, except another 'override'.
+Subsequent assignments or appends to this variable which are not marked
+'override' will be ignored.
+
+   The 'override' directive was not invented for escalation in the war
+between makefiles and command arguments.  It was invented so you can
+alter and add to values that the user specifies with command arguments.
+
+   For example, suppose you always want the '-g' switch when you run the
+C compiler, but you would like to allow the user to specify the other
+switches with a command argument just as usual.  You could use this
+'override' directive:
+
+     override CFLAGS += -g
+
+   You can also use 'override' directives with 'define' directives.
+This is done as you might expect:
+
+     override define foo =
+     bar
+     endef
+
+*Note Defining Multi-Line Variables: Multi-Line.
+
+
+File: make.info,  Node: Multi-Line,  Next: Undefine Directive,  Prev: Override Directive,  Up: Using Variables
+
+6.8 Defining Multi-Line Variables
+=================================
+
+Another way to set the value of a variable is to use the 'define'
+directive.  This directive has an unusual syntax which allows newline
+characters to be included in the value, which is convenient for defining
+both canned sequences of commands (*note Defining Canned Recipes: Canned
+Recipes.), and also sections of makefile syntax to use with 'eval'
+(*note Eval Function::).
+
+   The 'define' directive is followed on the same line by the name of
+the variable being defined and an (optional) assignment operator, and
+nothing more.  The value to give the variable appears on the following
+lines.  The end of the value is marked by a line containing just the
+word 'endef'.  Aside from this difference in syntax, 'define' works just
+like any other variable definition.  The variable name may contain
+function and variable references, which are expanded when the directive
+is read to find the actual variable name to use.
+
+   You may omit the variable assignment operator if you prefer.  If
+omitted, 'make' assumes it to be '=' and creates a recursively-expanded
+variable (*note The Two Flavors of Variables: Flavors.).  When using a
+'+=' operator, the value is appended to the previous value as with any
+other append operation: with a single space separating the old and new
+values.
+
+   You may nest 'define' directives: 'make' will keep track of nested
+directives and report an error if they are not all properly closed with
+'endef'.  Note that lines beginning with the recipe prefix character are
+considered part of a recipe, so any 'define' or 'endef' strings
+appearing on such a line will not be considered 'make' directives.
+
+     define two-lines =
+     echo foo
+     echo $(bar)
+     endef
+
+   The value in an ordinary assignment cannot contain a newline; but the
+newlines that separate the lines of the value in a 'define' become part
+of the variable's value (except for the final newline which precedes the
+'endef' and is not considered part of the value).
+
+   When used in a recipe, the previous example is functionally
+equivalent to this:
+
+     two-lines = echo foo; echo $(bar)
+
+since two commands separated by semicolon behave much like two separate
+shell commands.  However, note that using two separate lines means
+'make' will invoke the shell twice, running an independent sub-shell for
+each line.  *Note Recipe Execution: Execution.
+
+   If you want variable definitions made with 'define' to take
+precedence over command-line variable definitions, you can use the
+'override' directive together with 'define':
+
+     override define two-lines =
+     foo
+     $(bar)
+     endef
+
+*Note The 'override' Directive: Override Directive.
+
+
+File: make.info,  Node: Undefine Directive,  Next: Environment,  Prev: Multi-Line,  Up: Using Variables
+
+6.9 Undefining Variables
+========================
+
+If you want to clear a variable, setting its value to empty is usually
+sufficient.  Expanding such a variable will yield the same result (empty
+string) regardless of whether it was set or not.  However, if you are
+using the 'flavor' (*note Flavor Function::) and 'origin' (*note Origin
+Function::) functions, there is a difference between a variable that was
+never set and a variable with an empty value.  In such situations you
+may want to use the 'undefine' directive to make a variable appear as if
+it was never set.  For example:
+
+     foo := foo
+     bar = bar
+
+     undefine foo
+     undefine bar
+
+     $(info $(origin foo))
+     $(info $(flavor bar))
+
+   This example will print "undefined" for both variables.
+
+   If you want to undefine a command-line variable definition, you can
+use the 'override' directive together with 'undefine', similar to how
+this is done for variable definitions:
+
+     override undefine CFLAGS
+
+
+File: make.info,  Node: Environment,  Next: Target-specific,  Prev: Undefine Directive,  Up: Using Variables
+
+6.10 Variables from the Environment
+===================================
+
+Variables in 'make' can come from the environment in which 'make' is
+run.  Every environment variable that 'make' sees when it starts up is
+transformed into a 'make' variable with the same name and value.
+However, an explicit assignment in the makefile, or with a command
+argument, overrides the environment.  (If the '-e' flag is specified,
+then values from the environment override assignments in the makefile.
+*Note Summary of Options: Options Summary.  But this is not recommended
+practice.)
+
+   Thus, by setting the variable 'CFLAGS' in your environment, you can
+cause all C compilations in most makefiles to use the compiler switches
+you prefer.  This is safe for variables with standard or conventional
+meanings because you know that no makefile will use them for other
+things.  (Note this is not totally reliable; some makefiles set 'CFLAGS'
+explicitly and therefore are not affected by the value in the
+environment.)
+
+   When 'make' runs a recipe, variables defined in the makefile are
+placed into the environment of each shell.  This allows you to pass
+values to sub-'make' invocations (*note Recursive Use of 'make':
+Recursion.).  By default, only variables that came from the environment
+or the command line are passed to recursive invocations.  You can use
+the 'export' directive to pass other variables.  *Note Communicating
+Variables to a Sub-'make': Variables/Recursion, for full details.
+
+   Other use of variables from the environment is not recommended.  It
+is not wise for makefiles to depend for their functioning on environment
+variables set up outside their control, since this would cause different
+users to get different results from the same makefile.  This is against
+the whole purpose of most makefiles.
+
+   Such problems would be especially likely with the variable 'SHELL',
+which is normally present in the environment to specify the user's
+choice of interactive shell.  It would be very undesirable for this
+choice to affect 'make'; so, 'make' handles the 'SHELL' environment
+variable in a special way; see *note Choosing the Shell::.
+
+
+File: make.info,  Node: Target-specific,  Next: Pattern-specific,  Prev: Environment,  Up: Using Variables
+
+6.11 Target-specific Variable Values
+====================================
+
+Variable values in 'make' are usually global; that is, they are the same
+regardless of where they are evaluated (unless they're reset, of
+course).  One exception to that is automatic variables (*note Automatic
+Variables::).
+
+   The other exception is "target-specific variable values".  This
+feature allows you to define different values for the same variable,
+based on the target that 'make' is currently building.  As with
+automatic variables, these values are only available within the context
+of a target's recipe (and in other target-specific assignments).
+
+   Set a target-specific variable value like this:
+
+     TARGET ... : VARIABLE-ASSIGNMENT
+
+   Target-specific variable assignments can be prefixed with any or all
+of the special keywords 'export', 'override', or 'private'; these apply
+their normal behavior to this instance of the variable only.
+
+   Multiple TARGET values create a target-specific variable value for
+each member of the target list individually.
+
+   The VARIABLE-ASSIGNMENT can be any valid form of assignment;
+recursive ('='), simple (':=' or '::='), appending ('+='), or
+conditional ('?=').  All variables that appear within the
+VARIABLE-ASSIGNMENT are evaluated within the context of the target:
+thus, any previously-defined target-specific variable values will be in
+effect.  Note that this variable is actually distinct from any "global"
+value: the two variables do not have to have the same flavor (recursive
+vs. simple).
+
+   Target-specific variables have the same priority as any other
+makefile variable.  Variables provided on the command line (and in the
+environment if the '-e' option is in force) will take precedence.
+Specifying the 'override' directive will allow the target-specific
+variable value to be preferred.
+
+   There is one more special feature of target-specific variables: when
+you define a target-specific variable that variable value is also in
+effect for all prerequisites of this target, and all their
+prerequisites, etc. (unless those prerequisites override that variable
+with their own target-specific variable value).  So, for example, a
+statement like this:
+
+     prog : CFLAGS = -g
+     prog : prog.o foo.o bar.o
+
+will set 'CFLAGS' to '-g' in the recipe for 'prog', but it will also set
+'CFLAGS' to '-g' in the recipes that create 'prog.o', 'foo.o', and
+'bar.o', and any recipes which create their prerequisites.
+
+   Be aware that a given prerequisite will only be built once per
+invocation of make, at most.  If the same file is a prerequisite of
+multiple targets, and each of those targets has a different value for
+the same target-specific variable, then the first target to be built
+will cause that prerequisite to be built and the prerequisite will
+inherit the target-specific value from the first target.  It will ignore
+the target-specific values from any other targets.
+
+
+File: make.info,  Node: Pattern-specific,  Next: Suppressing Inheritance,  Prev: Target-specific,  Up: Using Variables
+
+6.12 Pattern-specific Variable Values
+=====================================
+
+In addition to target-specific variable values (*note Target-specific
+Variable Values: Target-specific.), GNU 'make' supports pattern-specific
+variable values.  In this form, the variable is defined for any target
+that matches the pattern specified.
+
+   Set a pattern-specific variable value like this:
+
+     PATTERN ... : VARIABLE-ASSIGNMENT
+   where PATTERN is a %-pattern.  As with target-specific variable
+values, multiple PATTERN values create a pattern-specific variable value
+for each pattern individually.  The VARIABLE-ASSIGNMENT can be any valid
+form of assignment.  Any command line variable setting will take
+precedence, unless 'override' is specified.
+
+   For example:
+
+     %.o : CFLAGS = -O
+
+will assign 'CFLAGS' the value of '-O' for all targets matching the
+pattern '%.o'.
+
+   If a target matches more than one pattern, the matching
+pattern-specific variables with longer stems are interpreted first.
+This results in more specific variables taking precedence over the more
+generic ones, for example:
+
+     %.o: %.c
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+     lib/%.o: CFLAGS := -fPIC -g
+     %.o: CFLAGS := -g
+
+     all: foo.o lib/bar.o
+
+   In this example the first definition of the 'CFLAGS' variable will be
+used to update 'lib/bar.o' even though the second one also applies to
+this target.  Pattern-specific variables which result in the same stem
+length are considered in the order in which they were defined in the
+makefile.
+
+   Pattern-specific variables are searched after any target-specific
+variables defined explicitly for that target, and before target-specific
+variables defined for the parent target.
+
+
+File: make.info,  Node: Suppressing Inheritance,  Next: Special Variables,  Prev: Pattern-specific,  Up: Using Variables
+
+6.13 Suppressing Inheritance
+============================
+
+As described in previous sections, 'make' variables are inherited by
+prerequisites.  This capability allows you to modify the behavior of a
+prerequisite based on which targets caused it to be rebuilt.  For
+example, you might set a target-specific variable on a 'debug' target,
+then running 'make debug' will cause that variable to be inherited by
+all prerequisites of 'debug', while just running 'make all' (for
+example) would not have that assignment.
+
+   Sometimes, however, you may not want a variable to be inherited.  For
+these situations, 'make' provides the 'private' modifier.  Although this
+modifier can be used with any variable assignment, it makes the most
+sense with target- and pattern-specific variables.  Any variable marked
+'private' will be visible to its local target but will not be inherited
+by prerequisites of that target.  A global variable marked 'private'
+will be visible in the global scope but will not be inherited by any
+target, and hence will not be visible in any recipe.
+
+   As an example, consider this makefile:
+     EXTRA_CFLAGS =
+
+     prog: private EXTRA_CFLAGS = -L/usr/local/lib
+     prog: a.o b.o
+
+   Due to the 'private' modifier, 'a.o' and 'b.o' will not inherit the
+'EXTRA_CFLAGS' variable assignment from the 'prog' target.
+
+
+File: make.info,  Node: Special Variables,  Prev: Suppressing Inheritance,  Up: Using Variables
+
+6.14 Other Special Variables
+============================
+
+GNU 'make' supports some variables that have special properties.
+
+'MAKEFILE_LIST'
+     Contains the name of each makefile that is parsed by 'make', in the
+     order in which it was parsed.  The name is appended just before
+     'make' begins to parse the makefile.  Thus, if the first thing a
+     makefile does is examine the last word in this variable, it will be
+     the name of the current makefile.  Once the current makefile has
+     used 'include', however, the last word will be the just-included
+     makefile.
+
+     If a makefile named 'Makefile' has this content:
+
+          name1 := $(lastword $(MAKEFILE_LIST))
+
+          include inc.mk
+
+          name2 := $(lastword $(MAKEFILE_LIST))
+
+          all:
+                  @echo name1 = $(name1)
+                  @echo name2 = $(name2)
+
+     then you would expect to see this output:
+
+          name1 = Makefile
+          name2 = inc.mk
+
+'.DEFAULT_GOAL'
+     Sets the default goal to be used if no targets were specified on
+     the command line (*note Arguments to Specify the Goals: Goals.).
+     The '.DEFAULT_GOAL' variable allows you to discover the current
+     default goal, restart the default goal selection algorithm by
+     clearing its value, or to explicitly set the default goal.  The
+     following example illustrates these cases:
+
+          # Query the default goal.
+          ifeq ($(.DEFAULT_GOAL),)
+            $(warning no default goal is set)
+          endif
+
+          .PHONY: foo
+          foo: ; @echo $@
+
+          $(warning default goal is $(.DEFAULT_GOAL))
+
+          # Reset the default goal.
+          .DEFAULT_GOAL :=
+
+          .PHONY: bar
+          bar: ; @echo $@
+
+          $(warning default goal is $(.DEFAULT_GOAL))
+
+          # Set our own.
+          .DEFAULT_GOAL := foo
+
+     This makefile prints:
+
+          no default goal is set
+          default goal is foo
+          default goal is bar
+          foo
+
+     Note that assigning more than one target name to '.DEFAULT_GOAL' is
+     invalid and will result in an error.
+
+'MAKE_RESTARTS'
+     This variable is set only if this instance of 'make' has restarted
+     (*note How Makefiles Are Remade: Remaking Makefiles.): it will
+     contain the number of times this instance has restarted.  Note this
+     is not the same as recursion (counted by the 'MAKELEVEL' variable).
+     You should not set, modify, or export this variable.
+
+'MAKE_TERMOUT'
+'MAKE_TERMERR'
+     When 'make' starts it will check whether stdout and stderr will
+     show their output on a terminal.  If so, it will set 'MAKE_TERMOUT'
+     and 'MAKE_TERMERR', respectively, to the name of the terminal
+     device (or 'true' if this cannot be determined).  If set these
+     variables will be marked for export.  These variables will not be
+     changed by 'make' and they will not be modified if already set.
+
+     These values can be used (particularly in combination with output
+     synchronization (*note Output During Parallel Execution: Parallel
+     Output.) to determine whether 'make' itself is writing to a
+     terminal; they can be tested to decide whether to force recipe
+     commands to generate colorized output for example.
+
+     If you invoke a sub-'make' and redirect its stdout or stderr it is
+     your responsibility to reset or unexport these variables as well,
+     if your makefiles rely on them.
+
+'.RECIPEPREFIX'
+     The first character of the value of this variable is used as the
+     character make assumes is introducing a recipe line.  If the
+     variable is empty (as it is by default) that character is the
+     standard tab character.  For example, this is a valid makefile:
+
+          .RECIPEPREFIX = >
+          all:
+          > @echo Hello, world
+
+     The value of '.RECIPEPREFIX' can be changed multiple times; once
+     set it stays in effect for all rules parsed until it is modified.
+
+'.VARIABLES'
+     Expands to a list of the _names_ of all global variables defined so
+     far.  This includes variables which have empty values, as well as
+     built-in variables (*note Variables Used by Implicit Rules:
+     Implicit Variables.), but does not include any variables which are
+     only defined in a target-specific context.  Note that any value you
+     assign to this variable will be ignored; it will always return its
+     special value.
+
+'.FEATURES'
+     Expands to a list of special features supported by this version of
+     'make'.  Possible values include, but are not limited to:
+
+     'archives'
+          Supports 'ar' (archive) files using special file name syntax.
+          *Note Using 'make' to Update Archive Files: Archives.
+
+     'check-symlink'
+          Supports the '-L' ('--check-symlink-times') flag.  *Note
+          Summary of Options: Options Summary.
+
+     'else-if'
+          Supports "else if" non-nested conditionals.  *Note Syntax of
+          Conditionals: Conditional Syntax.
+
+     'jobserver'
+          Supports "job server" enhanced parallel builds.  *Note
+          Parallel Execution: Parallel.
+
+     'oneshell'
+          Supports the '.ONESHELL' special target.  *Note Using One
+          Shell: One Shell.
+
+     'order-only'
+          Supports order-only prerequisites.  *Note Types of
+          Prerequisites: Prerequisite Types.
+
+     'second-expansion'
+          Supports secondary expansion of prerequisite lists.
+
+     'shortest-stem'
+          Uses the "shortest stem" method of choosing which pattern, of
+          multiple applicable options, will be used.  *Note How Patterns
+          Match: Pattern Match.
+
+     'target-specific'
+          Supports target-specific and pattern-specific variable
+          assignments.  *Note Target-specific Variable Values:
+          Target-specific.
+
+     'undefine'
+          Supports the 'undefine' directive.  *Note Undefine
+          Directive::.
+
+     'guile'
+          Has GNU Guile available as an embedded extension language.
+          *Note GNU Guile Integration: Guile Integration.
+
+     'load'
+          Supports dynamically loadable objects for creating custom
+          extensions.  *Note Loading Dynamic Objects: Loading Objects.
+
+'.INCLUDE_DIRS'
+     Expands to a list of directories that 'make' searches for included
+     makefiles (*note Including Other Makefiles: Include.).
+
+
+File: make.info,  Node: Conditionals,  Next: Functions,  Prev: Using Variables,  Up: Top
+
+7 Conditional Parts of Makefiles
+********************************
+
+A "conditional" directive causes part of a makefile to be obeyed or
+ignored depending on the values of variables.  Conditionals can compare
+the value of one variable to another, or the value of a variable to a
+constant string.  Conditionals control what 'make' actually "sees" in
+the makefile, so they _cannot_ be used to control recipes at the time of
+execution.
+
+* Menu:
+
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+
+
+File: make.info,  Node: Conditional Example,  Next: Conditional Syntax,  Prev: Conditionals,  Up: Conditionals
+
+7.1 Example of a Conditional
+============================
+
+The following example of a conditional tells 'make' to use one set of
+libraries if the 'CC' variable is 'gcc', and a different set of
+libraries otherwise.  It works by controlling which of two recipe lines
+will be used for the rule.  The result is that 'CC=gcc' as an argument
+to 'make' changes not only which compiler is used but also which
+libraries are linked.
+
+     libs_for_gcc = -lgnu
+     normal_libs =
+
+     foo: $(objects)
+     ifeq ($(CC),gcc)
+             $(CC) -o foo $(objects) $(libs_for_gcc)
+     else
+             $(CC) -o foo $(objects) $(normal_libs)
+     endif
+
+   This conditional uses three directives: one 'ifeq', one 'else' and
+one 'endif'.
+
+   The 'ifeq' directive begins the conditional, and specifies the
+condition.  It contains two arguments, separated by a comma and
+surrounded by parentheses.  Variable substitution is performed on both
+arguments and then they are compared.  The lines of the makefile
+following the 'ifeq' are obeyed if the two arguments match; otherwise
+they are ignored.
+
+   The 'else' directive causes the following lines to be obeyed if the
+previous conditional failed.  In the example above, this means that the
+second alternative linking command is used whenever the first
+alternative is not used.  It is optional to have an 'else' in a
+conditional.
+
+   The 'endif' directive ends the conditional.  Every conditional must
+end with an 'endif'.  Unconditional makefile text follows.
+
+   As this example illustrates, conditionals work at the textual level:
+the lines of the conditional are treated as part of the makefile, or
+ignored, according to the condition.  This is why the larger syntactic
+units of the makefile, such as rules, may cross the beginning or the end
+of the conditional.
+
+   When the variable 'CC' has the value 'gcc', the above example has
+this effect:
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(libs_for_gcc)
+
+When the variable 'CC' has any other value, the effect is this:
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(normal_libs)
+
+   Equivalent results can be obtained in another way by conditionalizing
+a variable assignment and then using the variable unconditionally:
+
+     libs_for_gcc = -lgnu
+     normal_libs =
+
+     ifeq ($(CC),gcc)
+       libs=$(libs_for_gcc)
+     else
+       libs=$(normal_libs)
+     endif
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(libs)
+
+
+File: make.info,  Node: Conditional Syntax,  Next: Testing Flags,  Prev: Conditional Example,  Up: Conditionals
+
+7.2 Syntax of Conditionals
+==========================
+
+The syntax of a simple conditional with no 'else' is as follows:
+
+     CONDITIONAL-DIRECTIVE
+     TEXT-IF-TRUE
+     endif
+
+The TEXT-IF-TRUE may be any lines of text, to be considered as part of
+the makefile if the condition is true.  If the condition is false, no
+text is used instead.
+
+   The syntax of a complex conditional is as follows:
+
+     CONDITIONAL-DIRECTIVE
+     TEXT-IF-TRUE
+     else
+     TEXT-IF-FALSE
+     endif
+
+   or:
+
+     CONDITIONAL-DIRECTIVE-ONE
+     TEXT-IF-ONE-IS-TRUE
+     else CONDITIONAL-DIRECTIVE-TWO
+     TEXT-IF-TWO-IS-TRUE
+     else
+     TEXT-IF-ONE-AND-TWO-ARE-FALSE
+     endif
+
+There can be as many "'else' CONDITIONAL-DIRECTIVE" clauses as
+necessary.  Once a given condition is true, TEXT-IF-TRUE is used and no
+other clause is used; if no condition is true then TEXT-IF-FALSE is
+used.  The TEXT-IF-TRUE and TEXT-IF-FALSE can be any number of lines of
+text.
+
+   The syntax of the CONDITIONAL-DIRECTIVE is the same whether the
+conditional is simple or complex; after an 'else' or not.  There are
+four different directives that test different conditions.  Here is a
+table of them:
+
+'ifeq (ARG1, ARG2)'
+'ifeq 'ARG1' 'ARG2''
+'ifeq "ARG1" "ARG2"'
+'ifeq "ARG1" 'ARG2''
+'ifeq 'ARG1' "ARG2"'
+     Expand all variable references in ARG1 and ARG2 and compare them.
+     If they are identical, the TEXT-IF-TRUE is effective; otherwise,
+     the TEXT-IF-FALSE, if any, is effective.
+
+     Often you want to test if a variable has a non-empty value.  When
+     the value results from complex expansions of variables and
+     functions, expansions you would consider empty may actually contain
+     whitespace characters and thus are not seen as empty.  However, you
+     can use the 'strip' function (*note Text Functions::) to avoid
+     interpreting whitespace as a non-empty value.  For example:
+
+          ifeq ($(strip $(foo)),)
+          TEXT-IF-EMPTY
+          endif
+
+     will evaluate TEXT-IF-EMPTY even if the expansion of '$(foo)'
+     contains whitespace characters.
+
+'ifneq (ARG1, ARG2)'
+'ifneq 'ARG1' 'ARG2''
+'ifneq "ARG1" "ARG2"'
+'ifneq "ARG1" 'ARG2''
+'ifneq 'ARG1' "ARG2"'
+     Expand all variable references in ARG1 and ARG2 and compare them.
+     If they are different, the TEXT-IF-TRUE is effective; otherwise,
+     the TEXT-IF-FALSE, if any, is effective.
+
+'ifdef VARIABLE-NAME'
+     The 'ifdef' form takes the _name_ of a variable as its argument,
+     not a reference to a variable.  The value of that variable has a
+     non-empty value, the TEXT-IF-TRUE is effective; otherwise, the
+     TEXT-IF-FALSE, if any, is effective.  Variables that have never
+     been defined have an empty value.  The text VARIABLE-NAME is
+     expanded, so it could be a variable or function that expands to the
+     name of a variable.  For example:
+
+          bar = true
+          foo = bar
+          ifdef $(foo)
+          frobozz = yes
+          endif
+
+     The variable reference '$(foo)' is expanded, yielding 'bar', which
+     is considered to be the name of a variable.  The variable 'bar' is
+     not expanded, but its value is examined to determine if it is
+     non-empty.
+
+     Note that 'ifdef' only tests whether a variable has a value.  It
+     does not expand the variable to see if that value is nonempty.
+     Consequently, tests using 'ifdef' return true for all definitions
+     except those like 'foo ='.  To test for an empty value, use
+     'ifeq ($(foo),)'.  For example,
+
+          bar =
+          foo = $(bar)
+          ifdef foo
+          frobozz = yes
+          else
+          frobozz = no
+          endif
+
+     sets 'frobozz' to 'yes', while:
+
+          foo =
+          ifdef foo
+          frobozz = yes
+          else
+          frobozz = no
+          endif
+
+     sets 'frobozz' to 'no'.
+
+'ifndef VARIABLE-NAME'
+     If the variable VARIABLE-NAME has an empty value, the TEXT-IF-TRUE
+     is effective; otherwise, the TEXT-IF-FALSE, if any, is effective.
+     The rules for expansion and testing of VARIABLE-NAME are identical
+     to the 'ifdef' directive.
+
+   Extra spaces are allowed and ignored at the beginning of the
+conditional directive line, but a tab is not allowed.  (If the line
+begins with a tab, it will be considered part of a recipe for a rule.)
+Aside from this, extra spaces or tabs may be inserted with no effect
+anywhere except within the directive name or within an argument.  A
+comment starting with '#' may appear at the end of the line.
+
+   The other two directives that play a part in a conditional are 'else'
+and 'endif'.  Each of these directives is written as one word, with no
+arguments.  Extra spaces are allowed and ignored at the beginning of the
+line, and spaces or tabs at the end.  A comment starting with '#' may
+appear at the end of the line.
+
+   Conditionals affect which lines of the makefile 'make' uses.  If the
+condition is true, 'make' reads the lines of the TEXT-IF-TRUE as part of
+the makefile; if the condition is false, 'make' ignores those lines
+completely.  It follows that syntactic units of the makefile, such as
+rules, may safely be split across the beginning or the end of the
+conditional.
+
+   'make' evaluates conditionals when it reads a makefile.
+Consequently, you cannot use automatic variables in the tests of
+conditionals because they are not defined until recipes are run (*note
+Automatic Variables::).
+
+   To prevent intolerable confusion, it is not permitted to start a
+conditional in one makefile and end it in another.  However, you may
+write an 'include' directive within a conditional, provided you do not
+attempt to terminate the conditional inside the included file.
+
+
+File: make.info,  Node: Testing Flags,  Prev: Conditional Syntax,  Up: Conditionals
+
+7.3 Conditionals that Test Flags
+================================
+
+You can write a conditional that tests 'make' command flags such as '-t'
+by using the variable 'MAKEFLAGS' together with the 'findstring'
+function (*note Functions for String Substitution and Analysis: Text
+Functions.).  This is useful when 'touch' is not enough to make a file
+appear up to date.
+
+   The 'findstring' function determines whether one string appears as a
+substring of another.  If you want to test for the '-t' flag, use 't' as
+the first string and the value of 'MAKEFLAGS' as the other.
+
+   For example, here is how to arrange to use 'ranlib -t' to finish
+marking an archive file up to date:
+
+     archive.a: ...
+     ifneq (,$(findstring t,$(MAKEFLAGS)))
+             +touch archive.a
+             +ranlib -t archive.a
+     else
+             ranlib archive.a
+     endif
+
+The '+' prefix marks those recipe lines as "recursive" so that they will
+be executed despite use of the '-t' flag.  *Note Recursive Use of
+'make': Recursion.
+
+
+File: make.info,  Node: Functions,  Next: Running,  Prev: Conditionals,  Up: Top
+
+8 Functions for Transforming Text
+*********************************
+
+"Functions" allow you to do text processing in the makefile to compute
+the files to operate on or the commands to use in recipes.  You use a
+function in a "function call", where you give the name of the function
+and some text (the "arguments") for the function to operate on.  The
+result of the function's processing is substituted into the makefile at
+the point of the call, just as a variable might be substituted.
+
+* Menu:
+
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+
+
+File: make.info,  Node: Syntax of Functions,  Next: Text Functions,  Prev: Functions,  Up: Functions
+
+8.1 Function Call Syntax
+========================
+
+A function call resembles a variable reference.  It can appear anywhere
+a variable reference can appear, and it is expanded using the same rules
+as variable references.  A function call looks like this:
+
+     $(FUNCTION ARGUMENTS)
+
+or like this:
+
+     ${FUNCTION ARGUMENTS}
+
+   Here FUNCTION is a function name; one of a short list of names that
+are part of 'make'.  You can also essentially create your own functions
+by using the 'call' built-in function.
+
+   The ARGUMENTS are the arguments of the function.  They are separated
+from the function name by one or more spaces or tabs, and if there is
+more than one argument, then they are separated by commas.  Such
+whitespace and commas are not part of an argument's value.  The
+delimiters which you use to surround the function call, whether
+parentheses or braces, can appear in an argument only in matching pairs;
+the other kind of delimiters may appear singly.  If the arguments
+themselves contain other function calls or variable references, it is
+wisest to use the same kind of delimiters for all the references; write
+'$(subst a,b,$(x))', not '$(subst a,b,${x})'.  This is because it is
+clearer, and because only one type of delimiter is matched to find the
+end of the reference.
+
+   The text written for each argument is processed by substitution of
+variables and function calls to produce the argument value, which is the
+text on which the function acts.  The substitution is done in the order
+in which the arguments appear.
+
+   Commas and unmatched parentheses or braces cannot appear in the text
+of an argument as written; leading spaces cannot appear in the text of
+the first argument as written.  These characters can be put into the
+argument value by variable substitution.  First define variables 'comma'
+and 'space' whose values are isolated comma and space characters, then
+substitute these variables where such characters are wanted, like this:
+
+     comma:= ,
+     empty:=
+     space:= $(empty) $(empty)
+     foo:= a b c
+     bar:= $(subst $(space),$(comma),$(foo))
+     # bar is now 'a,b,c'.
+
+Here the 'subst' function replaces each space with a comma, through the
+value of 'foo', and substitutes the result.
+
+
+File: make.info,  Node: Text Functions,  Next: File Name Functions,  Prev: Syntax of Functions,  Up: Functions
+
+8.2 Functions for String Substitution and Analysis
+==================================================
+
+Here are some functions that operate on strings:
+
+'$(subst FROM,TO,TEXT)'
+     Performs a textual replacement on the text TEXT: each occurrence of
+     FROM is replaced by TO.  The result is substituted for the function
+     call.  For example,
+
+          $(subst ee,EE,feet on the street)
+
+     substitutes the string 'fEEt on the strEEt'.
+
+'$(patsubst PATTERN,REPLACEMENT,TEXT)'
+     Finds whitespace-separated words in TEXT that match PATTERN and
+     replaces them with REPLACEMENT.  Here PATTERN may contain a '%'
+     which acts as a wildcard, matching any number of any characters
+     within a word.  If REPLACEMENT also contains a '%', the '%' is
+     replaced by the text that matched the '%' in PATTERN.  Only the
+     first '%' in the PATTERN and REPLACEMENT is treated this way; any
+     subsequent '%' is unchanged.
+
+     '%' characters in 'patsubst' function invocations can be quoted
+     with preceding backslashes ('\').  Backslashes that would otherwise
+     quote '%' characters can be quoted with more backslashes.
+     Backslashes that quote '%' characters or other backslashes are
+     removed from the pattern before it is compared file names or has a
+     stem substituted into it.  Backslashes that are not in danger of
+     quoting '%' characters go unmolested.  For example, the pattern
+     'the\%weird\\%pattern\\' has 'the%weird\' preceding the operative
+     '%' character, and 'pattern\\' following it.  The final two
+     backslashes are left alone because they cannot affect any '%'
+     character.
+
+     Whitespace between words is folded into single space characters;
+     leading and trailing whitespace is discarded.
+
+     For example,
+
+          $(patsubst %.c,%.o,x.c.c bar.c)
+
+     produces the value 'x.c.o bar.o'.
+
+     Substitution references (*note Substitution References:
+     Substitution Refs.) are a simpler way to get the effect of the
+     'patsubst' function:
+
+          $(VAR:PATTERN=REPLACEMENT)
+
+     is equivalent to
+
+          $(patsubst PATTERN,REPLACEMENT,$(VAR))
+
+     The second shorthand simplifies one of the most common uses of
+     'patsubst': replacing the suffix at the end of file names.
+
+          $(VAR:SUFFIX=REPLACEMENT)
+
+     is equivalent to
+
+          $(patsubst %SUFFIX,%REPLACEMENT,$(VAR))
+
+     For example, you might have a list of object files:
+
+          objects = foo.o bar.o baz.o
+
+     To get the list of corresponding source files, you could simply
+     write:
+
+          $(objects:.o=.c)
+
+     instead of using the general form:
+
+          $(patsubst %.o,%.c,$(objects))
+
+'$(strip STRING)'
+     Removes leading and trailing whitespace from STRING and replaces
+     each internal sequence of one or more whitespace characters with a
+     single space.  Thus, '$(strip a b c )' results in 'a b c'.
+
+     The function 'strip' can be very useful when used in conjunction
+     with conditionals.  When comparing something with the empty string
+     '' using 'ifeq' or 'ifneq', you usually want a string of just
+     whitespace to match the empty string (*note Conditionals::).
+
+     Thus, the following may fail to have the desired results:
+
+          .PHONY: all
+          ifneq   "$(needs_made)" ""
+          all: $(needs_made)
+          else
+          all:;@echo 'Nothing to make!'
+          endif
+
+     Replacing the variable reference '$(needs_made)' with the function
+     call '$(strip $(needs_made))' in the 'ifneq' directive would make
+     it more robust.
+
+'$(findstring FIND,IN)'
+     Searches IN for an occurrence of FIND.  If it occurs, the value is
+     FIND; otherwise, the value is empty.  You can use this function in
+     a conditional to test for the presence of a specific substring in a
+     given string.  Thus, the two examples,
+
+          $(findstring a,a b c)
+          $(findstring a,b c)
+
+     produce the values 'a' and '' (the empty string), respectively.
+     *Note Testing Flags::, for a practical application of 'findstring'.
+
+'$(filter PATTERN...,TEXT)'
+     Returns all whitespace-separated words in TEXT that _do_ match any
+     of the PATTERN words, removing any words that _do not_ match.  The
+     patterns are written using '%', just like the patterns used in the
+     'patsubst' function above.
+
+     The 'filter' function can be used to separate out different types
+     of strings (such as file names) in a variable.  For example:
+
+          sources := foo.c bar.c baz.s ugh.h
+          foo: $(sources)
+                  cc $(filter %.c %.s,$(sources)) -o foo
+
+     says that 'foo' depends of 'foo.c', 'bar.c', 'baz.s' and 'ugh.h'
+     but only 'foo.c', 'bar.c' and 'baz.s' should be specified in the
+     command to the compiler.
+
+'$(filter-out PATTERN...,TEXT)'
+     Returns all whitespace-separated words in TEXT that _do not_ match
+     any of the PATTERN words, removing the words that _do_ match one or
+     more.  This is the exact opposite of the 'filter' function.
+
+     For example, given:
+
+          objects=main1.o foo.o main2.o bar.o
+          mains=main1.o main2.o
+
+     the following generates a list which contains all the object files
+     not in 'mains':
+
+          $(filter-out $(mains),$(objects))
+
+'$(sort LIST)'
+     Sorts the words of LIST in lexical order, removing duplicate words.
+     The output is a list of words separated by single spaces.  Thus,
+
+          $(sort foo bar lose)
+
+     returns the value 'bar foo lose'.
+
+     Incidentally, since 'sort' removes duplicate words, you can use it
+     for this purpose even if you don't care about the sort order.
+
+'$(word N,TEXT)'
+     Returns the Nth word of TEXT.  The legitimate values of N start
+     from 1.  If N is bigger than the number of words in TEXT, the value
+     is empty.  For example,
+
+          $(word 2, foo bar baz)
+
+     returns 'bar'.
+
+'$(wordlist S,E,TEXT)'
+     Returns the list of words in TEXT starting with word S and ending
+     with word E (inclusive).  The legitimate values of S start from 1;
+     E may start from 0.  If S is bigger than the number of words in
+     TEXT, the value is empty.  If E is bigger than the number of words
+     in TEXT, words up to the end of TEXT are returned.  If S is greater
+     than E, nothing is returned.  For example,
+
+          $(wordlist 2, 3, foo bar baz)
+
+     returns 'bar baz'.
+
+'$(words TEXT)'
+     Returns the number of words in TEXT.  Thus, the last word of TEXT
+     is '$(word $(words TEXT),TEXT)'.
+
+'$(firstword NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace.  The value is the first name in the series.  The rest
+     of the names are ignored.
+
+     For example,
+
+          $(firstword foo bar)
+
+     produces the result 'foo'.  Although '$(firstword TEXT)' is the
+     same as '$(word 1,TEXT)', the 'firstword' function is retained for
+     its simplicity.
+
+'$(lastword NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace.  The value is the last name in the series.
+
+     For example,
+
+          $(lastword foo bar)
+
+     produces the result 'bar'.  Although '$(lastword TEXT)' is the same
+     as '$(word $(words TEXT),TEXT)', the 'lastword' function was added
+     for its simplicity and better performance.
+
+   Here is a realistic example of the use of 'subst' and 'patsubst'.
+Suppose that a makefile uses the 'VPATH' variable to specify a list of
+directories that 'make' should search for prerequisite files (*note
+'VPATH' Search Path for All Prerequisites: General Search.).  This
+example shows how to tell the C compiler to search for header files in
+the same list of directories.
+
+   The value of 'VPATH' is a list of directories separated by colons,
+such as 'src:../headers'.  First, the 'subst' function is used to change
+the colons to spaces:
+
+     $(subst :, ,$(VPATH))
+
+This produces 'src ../headers'.  Then 'patsubst' is used to turn each
+directory name into a '-I' flag.  These can be added to the value of the
+variable 'CFLAGS', which is passed automatically to the C compiler, like
+this:
+
+     override CFLAGS += $(patsubst %,-I%,$(subst :, ,$(VPATH)))
+
+The effect is to append the text '-Isrc -I../headers' to the previously
+given value of 'CFLAGS'.  The 'override' directive is used so that the
+new value is assigned even if the previous value of 'CFLAGS' was
+specified with a command argument (*note The 'override' Directive:
+Override Directive.).
+
+
+File: make.info,  Node: File Name Functions,  Next: Conditional Functions,  Prev: Text Functions,  Up: Functions
+
+8.3 Functions for File Names
+============================
+
+Several of the built-in expansion functions relate specifically to
+taking apart file names or lists of file names.
+
+   Each of the following functions performs a specific transformation on
+a file name.  The argument of the function is regarded as a series of
+file names, separated by whitespace.  (Leading and trailing whitespace
+is ignored.)  Each file name in the series is transformed in the same
+way and the results are concatenated with single spaces between them.
+
+'$(dir NAMES...)'
+     Extracts the directory-part of each file name in NAMES.  The
+     directory-part of the file name is everything up through (and
+     including) the last slash in it.  If the file name contains no
+     slash, the directory part is the string './'.  For example,
+
+          $(dir src/foo.c hacks)
+
+     produces the result 'src/ ./'.
+
+'$(notdir NAMES...)'
+     Extracts all but the directory-part of each file name in NAMES.  If
+     the file name contains no slash, it is left unchanged.  Otherwise,
+     everything through the last slash is removed from it.
+
+     A file name that ends with a slash becomes an empty string.  This
+     is unfortunate, because it means that the result does not always
+     have the same number of whitespace-separated file names as the
+     argument had; but we do not see any other valid alternative.
+
+     For example,
+
+          $(notdir src/foo.c hacks)
+
+     produces the result 'foo.c hacks'.
+
+'$(suffix NAMES...)'
+     Extracts the suffix of each file name in NAMES.  If the file name
+     contains a period, the suffix is everything starting with the last
+     period.  Otherwise, the suffix is the empty string.  This
+     frequently means that the result will be empty when NAMES is not,
+     and if NAMES contains multiple file names, the result may contain
+     fewer file names.
+
+     For example,
+
+          $(suffix src/foo.c src-1.0/bar.c hacks)
+
+     produces the result '.c .c'.
+
+'$(basename NAMES...)'
+     Extracts all but the suffix of each file name in NAMES.  If the
+     file name contains a period, the basename is everything starting up
+     to (and not including) the last period.  Periods in the directory
+     part are ignored.  If there is no period, the basename is the
+     entire file name.  For example,
+
+          $(basename src/foo.c src-1.0/bar hacks)
+
+     produces the result 'src/foo src-1.0/bar hacks'.
+
+'$(addsuffix SUFFIX,NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace; SUFFIX is used as a unit.  The value of SUFFIX is
+     appended to the end of each individual name and the resulting
+     larger names are concatenated with single spaces between them.  For
+     example,
+
+          $(addsuffix .c,foo bar)
+
+     produces the result 'foo.c bar.c'.
+
+'$(addprefix PREFIX,NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace; PREFIX is used as a unit.  The value of PREFIX is
+     prepended to the front of each individual name and the resulting
+     larger names are concatenated with single spaces between them.  For
+     example,
+
+          $(addprefix src/,foo bar)
+
+     produces the result 'src/foo src/bar'.
+
+'$(join LIST1,LIST2)'
+     Concatenates the two arguments word by word: the two first words
+     (one from each argument) concatenated form the first word of the
+     result, the two second words form the second word of the result,
+     and so on.  So the Nth word of the result comes from the Nth word
+     of each argument.  If one argument has more words that the other,
+     the extra words are copied unchanged into the result.
+
+     For example, '$(join a b,.c .o)' produces 'a.c b.o'.
+
+     Whitespace between the words in the lists is not preserved; it is
+     replaced with a single space.
+
+     This function can merge the results of the 'dir' and 'notdir'
+     functions, to produce the original list of files which was given to
+     those two functions.
+
+'$(wildcard PATTERN)'
+     The argument PATTERN is a file name pattern, typically containing
+     wildcard characters (as in shell file name patterns).  The result
+     of 'wildcard' is a space-separated list of the names of existing
+     files that match the pattern.  *Note Using Wildcard Characters in
+     File Names: Wildcards.
+
+'$(realpath NAMES...)'
+     For each file name in NAMES return the canonical absolute name.  A
+     canonical name does not contain any '.' or '..' components, nor any
+     repeated path separators ('/') or symlinks.  In case of a failure
+     the empty string is returned.  Consult the 'realpath(3)'
+     documentation for a list of possible failure causes.
+
+'$(abspath NAMES...)'
+     For each file name in NAMES return an absolute name that does not
+     contain any '.' or '..' components, nor any repeated path
+     separators ('/').  Note that, in contrast to 'realpath' function,
+     'abspath' does not resolve symlinks and does not require the file
+     names to refer to an existing file or directory.  Use the
+     'wildcard' function to test for existence.
+
+
+File: make.info,  Node: Conditional Functions,  Next: Foreach Function,  Prev: File Name Functions,  Up: Functions
+
+8.4 Functions for Conditionals
+==============================
+
+There are three functions that provide conditional expansion.  A key
+aspect of these functions is that not all of the arguments are expanded
+initially.  Only those arguments which need to be expanded, will be
+expanded.
+
+'$(if CONDITION,THEN-PART[,ELSE-PART])'
+     The 'if' function provides support for conditional expansion in a
+     functional context (as opposed to the GNU 'make' makefile
+     conditionals such as 'ifeq' (*note Syntax of Conditionals:
+     Conditional Syntax.).
+
+     The first argument, CONDITION, first has all preceding and trailing
+     whitespace stripped, then is expanded.  If it expands to any
+     non-empty string, then the condition is considered to be true.  If
+     it expands to an empty string, the condition is considered to be
+     false.
+
+     If the condition is true then the second argument, THEN-PART, is
+     evaluated and this is used as the result of the evaluation of the
+     entire 'if' function.
+
+     If the condition is false then the third argument, ELSE-PART, is
+     evaluated and this is the result of the 'if' function.  If there is
+     no third argument, the 'if' function evaluates to nothing (the
+     empty string).
+
+     Note that only one of the THEN-PART or the ELSE-PART will be
+     evaluated, never both.  Thus, either can contain side-effects (such
+     as 'shell' function calls, etc.)
+
+'$(or CONDITION1[,CONDITION2[,CONDITION3...]])'
+     The 'or' function provides a "short-circuiting" OR operation.  Each
+     argument is expanded, in order.  If an argument expands to a
+     non-empty string the processing stops and the result of the
+     expansion is that string.  If, after all arguments are expanded,
+     all of them are false (empty), then the result of the expansion is
+     the empty string.
+
+'$(and CONDITION1[,CONDITION2[,CONDITION3...]])'
+     The 'and' function provides a "short-circuiting" AND operation.
+     Each argument is expanded, in order.  If an argument expands to an
+     empty string the processing stops and the result of the expansion
+     is the empty string.  If all arguments expand to a non-empty string
+     then the result of the expansion is the expansion of the last
+     argument.
+
+
+File: make.info,  Node: Foreach Function,  Next: File Function,  Prev: Conditional Functions,  Up: Functions
+
+8.5 The 'foreach' Function
+==========================
+
+The 'foreach' function is very different from other functions.  It
+causes one piece of text to be used repeatedly, each time with a
+different substitution performed on it.  It resembles the 'for' command
+in the shell 'sh' and the 'foreach' command in the C-shell 'csh'.
+
+   The syntax of the 'foreach' function is:
+
+     $(foreach VAR,LIST,TEXT)
+
+The first two arguments, VAR and LIST, are expanded before anything else
+is done; note that the last argument, TEXT, is *not* expanded at the
+same time.  Then for each word of the expanded value of LIST, the
+variable named by the expanded value of VAR is set to that word, and
+TEXT is expanded.  Presumably TEXT contains references to that variable,
+so its expansion will be different each time.
+
+   The result is that TEXT is expanded as many times as there are
+whitespace-separated words in LIST.  The multiple expansions of TEXT are
+concatenated, with spaces between them, to make the result of 'foreach'.
+
+   This simple example sets the variable 'files' to the list of all
+files in the directories in the list 'dirs':
+
+     dirs := a b c d
+     files := $(foreach dir,$(dirs),$(wildcard $(dir)/*))
+
+   Here TEXT is '$(wildcard $(dir)/*)'.  The first repetition finds the
+value 'a' for 'dir', so it produces the same result as '$(wildcard
+a/*)'; the second repetition produces the result of '$(wildcard b/*)';
+and the third, that of '$(wildcard c/*)'.
+
+   This example has the same result (except for setting 'dirs') as the
+following example:
+
+     files := $(wildcard a/* b/* c/* d/*)
+
+   When TEXT is complicated, you can improve readability by giving it a
+name, with an additional variable:
+
+     find_files = $(wildcard $(dir)/*)
+     dirs := a b c d
+     files := $(foreach dir,$(dirs),$(find_files))
+
+Here we use the variable 'find_files' this way.  We use plain '=' to
+define a recursively-expanding variable, so that its value contains an
+actual function call to be re-expanded under the control of 'foreach'; a
+simply-expanded variable would not do, since 'wildcard' would be called
+only once at the time of defining 'find_files'.
+
+   The 'foreach' function has no permanent effect on the variable VAR;
+its value and flavor after the 'foreach' function call are the same as
+they were beforehand.  The other values which are taken from LIST are in
+effect only temporarily, during the execution of 'foreach'.  The
+variable VAR is a simply-expanded variable during the execution of
+'foreach'.  If VAR was undefined before the 'foreach' function call, it
+is undefined after the call.  *Note The Two Flavors of Variables:
+Flavors.
+
+   You must take care when using complex variable expressions that
+result in variable names because many strange things are valid variable
+names, but are probably not what you intended.  For example,
+
+     files := $(foreach Esta-escrito-en-espanol!,b c ch,$(find_files))
+
+might be useful if the value of 'find_files' references the variable
+whose name is 'Esta-escrito-en-espanol!' (es un nombre bastante largo,
+no?), but it is more likely to be a mistake.
+
+
+File: make.info,  Node: File Function,  Next: Call Function,  Prev: Foreach Function,  Up: Functions
+
+8.6 The 'file' Function
+=======================
+
+The 'file' function allows the makefile to write to a file.  Two modes
+of writing are supported: overwrite, where the text is written to the
+beginning of the file and any existing content is lost, and append,
+where the text is written to the end of the file, preserving the
+existing content.  In all cases the file is created if it does not
+exist.
+
+   The syntax of the 'file' function is:
+
+     $(file OP FILENAME[,TEXT])
+
+   The operator OP can be either '>' which indicates overwrite mode, or
+'>>' which indicates append mode.  The FILENAME indicates the file to be
+written to.  There may optionally be whitespace between the operator and
+the file name.
+
+   When the 'file' function is expanded all its arguments are expanded
+first, then the file indicated by FILENAME will be opened in the mode
+described by OP.  Finally TEXT will be written to the file.  If TEXT
+does not already end in a newline, even if empty, a final newline will
+be written.  If the TEXT argument is not given, nothing will be written.
+The result of evaluating the 'file' function is always the empty string.
+
+   It is a fatal error if the file cannot be opened for writing, or if
+the write operation fails.
+
+   For example, the 'file' function can be useful if your build system
+has a limited command line size and your recipe runs a command that can
+accept arguments from a file as well.  Many commands use the convention
+that an argument prefixed with an '@' specifies a file containing more
+arguments.  Then you might write your recipe in this way:
+
+     program: $(OBJECTS)
+             $(file >$@.in,$^)
+             $(CMD) $(CMDFLAGS) @$@.in
+             @rm $@.in
+
+   If the command required each argument to be on a separate line of the
+input file, you might write your recipe like this:
+
+     program: $(OBJECTS)
+             $(file >$@.in) $(foreach O,$^,$(file >>$@.in,$O))
+             $(CMD) $(CMDFLAGS) @$@.in
+             @rm $@.in
+
+
+File: make.info,  Node: Call Function,  Next: Value Function,  Prev: File Function,  Up: Functions
+
+8.7 The 'call' Function
+=======================
+
+The 'call' function is unique in that it can be used to create new
+parameterized functions.  You can write a complex expression as the
+value of a variable, then use 'call' to expand it with different values.
+
+   The syntax of the 'call' function is:
+
+     $(call VARIABLE,PARAM,PARAM,...)
+
+   When 'make' expands this function, it assigns each PARAM to temporary
+variables '$(1)', '$(2)', etc.  The variable '$(0)' will contain
+VARIABLE.  There is no maximum number of parameter arguments.  There is
+no minimum, either, but it doesn't make sense to use 'call' with no
+parameters.
+
+   Then VARIABLE is expanded as a 'make' variable in the context of
+these temporary assignments.  Thus, any reference to '$(1)' in the value
+of VARIABLE will resolve to the first PARAM in the invocation of 'call'.
+
+   Note that VARIABLE is the _name_ of a variable, not a _reference_ to
+that variable.  Therefore you would not normally use a '$' or
+parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   If VARIABLE is the name of a built-in function, the built-in function
+is always invoked (even if a 'make' variable by that name also exists).
+
+   The 'call' function expands the PARAM arguments before assigning them
+to temporary variables.  This means that VARIABLE values containing
+references to built-in functions that have special expansion rules, like
+'foreach' or 'if', may not work as you expect.
+
+   Some examples may make this clearer.
+
+   This macro simply reverses its arguments:
+
+     reverse = $(2) $(1)
+
+     foo = $(call reverse,a,b)
+
+Here FOO will contain 'b a'.
+
+   This one is slightly more interesting: it defines a macro to search
+for the first instance of a program in 'PATH':
+
+     pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH)))))
+
+     LS := $(call pathsearch,ls)
+
+Now the variable LS contains '/bin/ls' or similar.
+
+   The 'call' function can be nested.  Each recursive invocation gets
+its own local values for '$(1)', etc. that mask the values of
+higher-level 'call'.  For example, here is an implementation of a "map"
+function:
+
+     map = $(foreach a,$(2),$(call $(1),$(a)))
+
+   Now you can MAP a function that normally takes only one argument,
+such as 'origin', to multiple values in one step:
+
+     o = $(call map,origin,o map MAKE)
+
+   and end up with O containing something like 'file file default'.
+
+   A final caution: be careful when adding whitespace to the arguments
+to 'call'.  As with other functions, any whitespace contained in the
+second and subsequent arguments is kept; this can cause strange effects.
+It's generally safest to remove all extraneous whitespace when providing
+parameters to 'call'.
+
+
+File: make.info,  Node: Value Function,  Next: Eval Function,  Prev: Call Function,  Up: Functions
+
+8.8 The 'value' Function
+========================
+
+The 'value' function provides a way for you to use the value of a
+variable _without_ having it expanded.  Please note that this does not
+undo expansions which have already occurred; for example if you create a
+simply expanded variable its value is expanded during the definition; in
+that case the 'value' function will return the same result as using the
+variable directly.
+
+   The syntax of the 'value' function is:
+
+     $(value VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable, not a _reference_ to
+that variable.  Therefore you would not normally use a '$' or
+parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string containing the value of
+VARIABLE, without any expansion occurring.  For example, in this
+makefile:
+
+     FOO = $PATH
+
+     all:
+             @echo $(FOO)
+             @echo $(value FOO)
+
+The first output line would be 'ATH', since the "$P" would be expanded
+as a 'make' variable, while the second output line would be the current
+value of your '$PATH' environment variable, since the 'value' function
+avoided the expansion.
+
+   The 'value' function is most often used in conjunction with the
+'eval' function (*note Eval Function::).
+
+
+File: make.info,  Node: Eval Function,  Next: Origin Function,  Prev: Value Function,  Up: Functions
+
+8.9 The 'eval' Function
+=======================
+
+The 'eval' function is very special: it allows you to define new
+makefile constructs that are not constant; which are the result of
+evaluating other variables and functions.  The argument to the 'eval'
+function is expanded, then the results of that expansion are parsed as
+makefile syntax.  The expanded results can define new 'make' variables,
+targets, implicit or explicit rules, etc.
+
+   The result of the 'eval' function is always the empty string; thus,
+it can be placed virtually anywhere in a makefile without causing syntax
+errors.
+
+   It's important to realize that the 'eval' argument is expanded
+_twice_; first by the 'eval' function, then the results of that
+expansion are expanded again when they are parsed as makefile syntax.
+This means you may need to provide extra levels of escaping for "$"
+characters when using 'eval'.  The 'value' function (*note Value
+Function::) can sometimes be useful in these situations, to circumvent
+unwanted expansions.
+
+   Here is an example of how 'eval' can be used; this example combines a
+number of concepts and other functions.  Although it might seem overly
+complex to use 'eval' in this example, rather than just writing out the
+rules, consider two things: first, the template definition (in
+'PROGRAM_template') could need to be much more complex than it is here;
+and second, you might put the complex, "generic" part of this example
+into another makefile, then include it in all the individual makefiles.
+Now your individual makefiles are quite straightforward.
+
+     PROGRAMS    = server client
+
+     server_OBJS = server.o server_priv.o server_access.o
+     server_LIBS = priv protocol
+
+     client_OBJS = client.o client_api.o client_mem.o
+     client_LIBS = protocol
+
+     # Everything after this is generic
+
+     .PHONY: all
+     all: $(PROGRAMS)
+
+     define PROGRAM_template =
+      $(1): $$($(1)_OBJS) $$($(1)_LIBS:%=-l%)
+      ALL_OBJS   += $$($(1)_OBJS)
+     endef
+
+     $(foreach prog,$(PROGRAMS),$(eval $(call PROGRAM_template,$(prog))))
+
+     $(PROGRAMS):
+             $(LINK.o) $^ $(LDLIBS) -o $@
+
+     clean:
+             rm -f $(ALL_OBJS) $(PROGRAMS)
+
+
+File: make.info,  Node: Origin Function,  Next: Flavor Function,  Prev: Eval Function,  Up: Functions
+
+8.10 The 'origin' Function
+==========================
+
+The 'origin' function is unlike most other functions in that it does not
+operate on the values of variables; it tells you something _about_ a
+variable.  Specifically, it tells you where it came from.
+
+   The syntax of the 'origin' function is:
+
+     $(origin VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable to inquire about, not
+a _reference_ to that variable.  Therefore you would not normally use a
+'$' or parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string telling you how the variable
+VARIABLE was defined:
+
+'undefined'
+
+     if VARIABLE was never defined.
+
+'default'
+
+     if VARIABLE has a default definition, as is usual with 'CC' and so
+     on.  *Note Variables Used by Implicit Rules: Implicit Variables.
+     Note that if you have redefined a default variable, the 'origin'
+     function will return the origin of the later definition.
+
+'environment'
+
+     if VARIABLE was inherited from the environment provided to 'make'.
+
+'environment override'
+
+     if VARIABLE was inherited from the environment provided to 'make',
+     and is overriding a setting for VARIABLE in the makefile as a
+     result of the '-e' option (*note Summary of Options: Options
+     Summary.).
+
+'file'
+
+     if VARIABLE was defined in a makefile.
+
+'command line'
+
+     if VARIABLE was defined on the command line.
+
+'override'
+
+     if VARIABLE was defined with an 'override' directive in a makefile
+     (*note The 'override' Directive: Override Directive.).
+
+'automatic'
+
+     if VARIABLE is an automatic variable defined for the execution of
+     the recipe for each rule (*note Automatic Variables::).
+
+   This information is primarily useful (other than for your curiosity)
+to determine if you want to believe the value of a variable.  For
+example, suppose you have a makefile 'foo' that includes another
+makefile 'bar'.  You want a variable 'bletch' to be defined in 'bar' if
+you run the command 'make -f bar', even if the environment contains a
+definition of 'bletch'.  However, if 'foo' defined 'bletch' before
+including 'bar', you do not want to override that definition.  This
+could be done by using an 'override' directive in 'foo', giving that
+definition precedence over the later definition in 'bar'; unfortunately,
+the 'override' directive would also override any command line
+definitions.  So, 'bar' could include:
+
+     ifdef bletch
+     ifeq "$(origin bletch)" "environment"
+     bletch = barf, gag, etc.
+     endif
+     endif
+
+If 'bletch' has been defined from the environment, this will redefine
+it.
+
+   If you want to override a previous definition of 'bletch' if it came
+from the environment, even under '-e', you could instead write:
+
+     ifneq "$(findstring environment,$(origin bletch))" ""
+     bletch = barf, gag, etc.
+     endif
+
+   Here the redefinition takes place if '$(origin bletch)' returns
+either 'environment' or 'environment override'.  *Note Functions for
+String Substitution and Analysis: Text Functions.
+
+
+File: make.info,  Node: Flavor Function,  Next: Make Control Functions,  Prev: Origin Function,  Up: Functions
+
+8.11 The 'flavor' Function
+==========================
+
+The 'flavor' function, like the 'origin' function, does not operate on
+the values of variables but rather it tells you something _about_ a
+variable.  Specifically, it tells you the flavor of a variable (*note
+The Two Flavors of Variables: Flavors.).
+
+   The syntax of the 'flavor' function is:
+
+     $(flavor VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable to inquire about, not
+a _reference_ to that variable.  Therefore you would not normally use a
+'$' or parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string that identifies the flavor of
+the variable VARIABLE:
+
+'undefined'
+
+     if VARIABLE was never defined.
+
+'recursive'
+
+     if VARIABLE is a recursively expanded variable.
+
+'simple'
+
+     if VARIABLE is a simply expanded variable.
+
+
+File: make.info,  Node: Make Control Functions,  Next: Shell Function,  Prev: Flavor Function,  Up: Functions
+
+8.12 Functions That Control Make
+================================
+
+These functions control the way make runs.  Generally, they are used to
+provide information to the user of the makefile or to cause make to stop
+if some sort of environmental error is detected.
+
+'$(error TEXT...)'
+     Generates a fatal error where the message is TEXT.  Note that the
+     error is generated whenever this function is evaluated.  So, if you
+     put it inside a recipe or on the right side of a recursive variable
+     assignment, it won't be evaluated until later.  The TEXT will be
+     expanded before the error is generated.
+
+     For example,
+
+          ifdef ERROR1
+          $(error error is $(ERROR1))
+          endif
+
+     will generate a fatal error during the read of the makefile if the
+     'make' variable 'ERROR1' is defined.  Or,
+
+          ERR = $(error found an error!)
+
+          .PHONY: err
+          err: ; $(ERR)
+
+     will generate a fatal error while 'make' is running, if the 'err'
+     target is invoked.
+
+'$(warning TEXT...)'
+     This function works similarly to the 'error' function, above,
+     except that 'make' doesn't exit.  Instead, TEXT is expanded and the
+     resulting message is displayed, but processing of the makefile
+     continues.
+
+     The result of the expansion of this function is the empty string.
+
+'$(info TEXT...)'
+     This function does nothing more than print its (expanded)
+     argument(s) to standard output.  No makefile name or line number is
+     added.  The result of the expansion of this function is the empty
+     string.
+
+
+File: make.info,  Node: Shell Function,  Next: Guile Function,  Prev: Make Control Functions,  Up: Functions
+
+8.13 The 'shell' Function
+=========================
+
+The 'shell' function is unlike any other function other than the
+'wildcard' function (*note The Function 'wildcard': Wildcard Function.)
+in that it communicates with the world outside of 'make'.
+
+   The 'shell' function performs the same function that backquotes ('`')
+perform in most shells: it does "command expansion".  This means that it
+takes as an argument a shell command and evaluates to the output of the
+command.  The only processing 'make' does on the result is to convert
+each newline (or carriage-return / newline pair) to a single space.  If
+there is a trailing (carriage-return and) newline it will simply be
+removed.
+
+   The commands run by calls to the 'shell' function are run when the
+function calls are expanded (*note How 'make' Reads a Makefile: Reading
+Makefiles.).  Because this function involves spawning a new shell, you
+should carefully consider the performance implications of using the
+'shell' function within recursively expanded variables vs. simply
+expanded variables (*note The Two Flavors of Variables: Flavors.).
+
+   Here are some examples of the use of the 'shell' function:
+
+     contents := $(shell cat foo)
+
+sets 'contents' to the contents of the file 'foo', with a space (rather
+than a newline) separating each line.
+
+     files := $(shell echo *.c)
+
+sets 'files' to the expansion of '*.c'.  Unless 'make' is using a very
+strange shell, this has the same result as '$(wildcard *.c)' (as long as
+at least one '.c' file exists).
+
+
+File: make.info,  Node: Guile Function,  Prev: Shell Function,  Up: Functions
+
+8.14 The 'guile' Function
+=========================
+
+If GNU 'make' is built with support for GNU Guile as an embedded
+extension language then the 'guile' function will be available.  The
+'guile' function takes one argument which is first expanded by 'make' in
+the normal fashion, then passed to the GNU Guile evaluator.  The result
+of the evaluator is converted into a string and used as the expansion of
+the 'guile' function in the makefile.  See *note GNU Guile Integration:
+Guile Integration. for details on writing extensions to 'make' in Guile.
+
+   You can determine whether GNU Guile support is available by checking
+the '.FEATURES' variable for the word GUILE.
+
+
+File: make.info,  Node: Running,  Next: Implicit Rules,  Prev: Functions,  Up: Top
+
+9 How to Run 'make'
+*******************
+
+A makefile that says how to recompile a program can be used in more than
+one way.  The simplest use is to recompile every file that is out of
+date.  Usually, makefiles are written so that if you run 'make' with no
+arguments, it does just that.
+
+   But you might want to update only some of the files; you might want
+to use a different compiler or different compiler options; you might
+want just to find out which files are out of date without changing them.
+
+   By giving arguments when you run 'make', you can do any of these
+things and many others.
+
+   The exit status of 'make' is always one of three values:
+'0'
+     The exit status is zero if 'make' is successful.
+'2'
+     The exit status is two if 'make' encounters any errors.  It will
+     print messages describing the particular errors.
+'1'
+     The exit status is one if you use the '-q' flag and 'make'
+     determines that some target is not already up to date.  *Note
+     Instead of Executing Recipes: Instead of Execution.
+
+* Menu:
+
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+
+
+File: make.info,  Node: Makefile Arguments,  Next: Goals,  Prev: Running,  Up: Running
+
+9.1 Arguments to Specify the Makefile
+=====================================
+
+The way to specify the name of the makefile is with the '-f' or '--file'
+option ('--makefile' also works).  For example, '-f altmake' says to use
+the file 'altmake' as the makefile.
+
+   If you use the '-f' flag several times and follow each '-f' with an
+argument, all the specified files are used jointly as makefiles.
+
+   If you do not use the '-f' or '--file' flag, the default is to try
+'GNUmakefile', 'makefile', and 'Makefile', in that order, and use the
+first of these three which exists or can be made (*note Writing
+Makefiles: Makefiles.).
+
+
+File: make.info,  Node: Goals,  Next: Instead of Execution,  Prev: Makefile Arguments,  Up: Running
+
+9.2 Arguments to Specify the Goals
+==================================
+
+The "goals" are the targets that 'make' should strive ultimately to
+update.  Other targets are updated as well if they appear as
+prerequisites of goals, or prerequisites of prerequisites of goals, etc.
+
+   By default, the goal is the first target in the makefile (not
+counting targets that start with a period).  Therefore, makefiles are
+usually written so that the first target is for compiling the entire
+program or programs they describe.  If the first rule in the makefile
+has several targets, only the first target in the rule becomes the
+default goal, not the whole list.  You can manage the selection of the
+default goal from within your makefile using the '.DEFAULT_GOAL'
+variable (*note Other Special Variables: Special Variables.).
+
+   You can also specify a different goal or goals with command line
+arguments to 'make'.  Use the name of the goal as an argument.  If you
+specify several goals, 'make' processes each of them in turn, in the
+order you name them.
+
+   Any target in the makefile may be specified as a goal (unless it
+starts with '-' or contains an '=', in which case it will be parsed as a
+switch or variable definition, respectively).  Even targets not in the
+makefile may be specified, if 'make' can find implicit rules that say
+how to make them.
+
+   'Make' will set the special variable 'MAKECMDGOALS' to the list of
+goals you specified on the command line.  If no goals were given on the
+command line, this variable is empty.  Note that this variable should be
+used only in special circumstances.
+
+   An example of appropriate use is to avoid including '.d' files during
+'clean' rules (*note Automatic Prerequisites::), so 'make' won't create
+them only to immediately remove them again:
+
+     sources = foo.c bar.c
+
+     ifneq ($(MAKECMDGOALS),clean)
+     include $(sources:.c=.d)
+     endif
+
+   One use of specifying a goal is if you want to compile only a part of
+the program, or only one of several programs.  Specify as a goal each
+file that you wish to remake.  For example, consider a directory
+containing several programs, with a makefile that starts like this:
+
+     .PHONY: all
+     all: size nm ld ar as
+
+   If you are working on the program 'size', you might want to say 'make size'
+so that only the files of that program are recompiled.
+
+   Another use of specifying a goal is to make files that are not
+normally made.  For example, there may be a file of debugging output, or
+a version of the program that is compiled specially for testing, which
+has a rule in the makefile but is not a prerequisite of the default
+goal.
+
+   Another use of specifying a goal is to run the recipe associated with
+a phony target (*note Phony Targets::) or empty target (*note Empty
+Target Files to Record Events: Empty Targets.).  Many makefiles contain
+a phony target named 'clean' which deletes everything except source
+files.  Naturally, this is done only if you request it explicitly with
+'make clean'.  Following is a list of typical phony and empty target
+names.  *Note Standard Targets::, for a detailed list of all the
+standard target names which GNU software packages use.
+
+'all'
+     Make all the top-level targets the makefile knows about.
+
+'clean'
+     Delete all files that are normally created by running 'make'.
+
+'mostlyclean'
+     Like 'clean', but may refrain from deleting a few files that people
+     normally don't want to recompile.  For example, the 'mostlyclean'
+     target for GCC does not delete 'libgcc.a', because recompiling it
+     is rarely necessary and takes a lot of time.
+
+'distclean'
+'realclean'
+'clobber'
+     Any of these targets might be defined to delete _more_ files than
+     'clean' does.  For example, this would delete configuration files
+     or links that you would normally create as preparation for
+     compilation, even if the makefile itself cannot create these files.
+
+'install'
+     Copy the executable file into a directory that users typically
+     search for commands; copy any auxiliary files that the executable
+     uses into the directories where it will look for them.
+
+'print'
+     Print listings of the source files that have changed.
+
+'tar'
+     Create a tar file of the source files.
+
+'shar'
+     Create a shell archive (shar file) of the source files.
+
+'dist'
+     Create a distribution file of the source files.  This might be a
+     tar file, or a shar file, or a compressed version of one of the
+     above, or even more than one of the above.
+
+'TAGS'
+     Update a tags table for this program.
+
+'check'
+'test'
+     Perform self tests on the program this makefile builds.
+
+
+File: make.info,  Node: Instead of Execution,  Next: Avoiding Compilation,  Prev: Goals,  Up: Running
+
+9.3 Instead of Executing Recipes
+================================
+
+The makefile tells 'make' how to tell whether a target is up to date,
+and how to update each target.  But updating the targets is not always
+what you want.  Certain options specify other activities for 'make'.
+
+'-n'
+'--just-print'
+'--dry-run'
+'--recon'
+
+     "No-op".  Causes 'make' to print the recipes that are needed to
+     make the targets up to date, but not actually execute them.  Note
+     that some recipes are still executed, even with this flag (*note
+     How the 'MAKE' Variable Works: MAKE Variable.).  Also any recipes
+     needed to update included makefiles are still executed (*note How
+     Makefiles Are Remade: Remaking Makefiles.).
+
+'-t'
+'--touch'
+
+     "Touch".  Marks targets as up to date without actually changing
+     them.  In other words, 'make' pretends to update the targets but
+     does not really change their contents; instead only their modified
+     times are updated.
+
+'-q'
+'--question'
+
+     "Question".  Silently check whether the targets are up to date, but
+     do not execute recipes; the exit code shows whether any updates are
+     needed.
+
+'-W FILE'
+'--what-if=FILE'
+'--assume-new=FILE'
+'--new-file=FILE'
+
+     "What if".  Each '-W' flag is followed by a file name.  The given
+     files' modification times are recorded by 'make' as being the
+     present time, although the actual modification times remain the
+     same.  You can use the '-W' flag in conjunction with the '-n' flag
+     to see what would happen if you were to modify specific files.
+
+   With the '-n' flag, 'make' prints the recipe that it would normally
+execute but usually does not execute it.
+
+   With the '-t' flag, 'make' ignores the recipes in the rules and uses
+(in effect) the command 'touch' for each target that needs to be remade.
+The 'touch' command is also printed, unless '-s' or '.SILENT' is used.
+For speed, 'make' does not actually invoke the program 'touch'.  It does
+the work directly.
+
+   With the '-q' flag, 'make' prints nothing and executes no recipes,
+but the exit status code it returns is zero if and only if the targets
+to be considered are already up to date.  If the exit status is one,
+then some updating needs to be done.  If 'make' encounters an error, the
+exit status is two, so you can distinguish an error from a target that
+is not up to date.
+
+   It is an error to use more than one of these three flags in the same
+invocation of 'make'.
+
+   The '-n', '-t', and '-q' options do not affect recipe lines that
+begin with '+' characters or contain the strings '$(MAKE)' or '${MAKE}'.
+Note that only the line containing the '+' character or the strings
+'$(MAKE)' or '${MAKE}' is run regardless of these options.  Other lines
+in the same rule are not run unless they too begin with '+' or contain
+'$(MAKE)' or '${MAKE}' (*Note How the 'MAKE' Variable Works: MAKE
+Variable.)
+
+   The '-t' flag prevents phony targets (*note Phony Targets::) from
+being updated, unless there are recipe lines beginning with '+' or
+containing '$(MAKE)' or '${MAKE}'.
+
+   The '-W' flag provides two features:
+
+   * If you also use the '-n' or '-q' flag, you can see what 'make'
+     would do if you were to modify some files.
+
+   * Without the '-n' or '-q' flag, when 'make' is actually executing
+     recipes, the '-W' flag can direct 'make' to act as if some files
+     had been modified, without actually running the recipes for those
+     files.
+
+   Note that the options '-p' and '-v' allow you to obtain other
+information about 'make' or about the makefiles in use (*note Summary of
+Options: Options Summary.).
+
+
+File: make.info,  Node: Avoiding Compilation,  Next: Overriding,  Prev: Instead of Execution,  Up: Running
+
+9.4 Avoiding Recompilation of Some Files
+========================================
+
+Sometimes you may have changed a source file but you do not want to
+recompile all the files that depend on it.  For example, suppose you add
+a macro or a declaration to a header file that many other files depend
+on.  Being conservative, 'make' assumes that any change in the header
+file requires recompilation of all dependent files, but you know that
+they do not need to be recompiled and you would rather not waste the
+time waiting for them to compile.
+
+   If you anticipate the problem before changing the header file, you
+can use the '-t' flag.  This flag tells 'make' not to run the recipes in
+the rules, but rather to mark the target up to date by changing its
+last-modification date.  You would follow this procedure:
+
+  1. Use the command 'make' to recompile the source files that really
+     need recompilation, ensuring that the object files are up-to-date
+     before you begin.
+
+  2. Make the changes in the header files.
+
+  3. Use the command 'make -t' to mark all the object files as up to
+     date.  The next time you run 'make', the changes in the header
+     files will not cause any recompilation.
+
+   If you have already changed the header file at a time when some files
+do need recompilation, it is too late to do this.  Instead, you can use
+the '-o FILE' flag, which marks a specified file as "old" (*note Summary
+of Options: Options Summary.).  This means that the file itself will not
+be remade, and nothing else will be remade on its account.  Follow this
+procedure:
+
+  1. Recompile the source files that need compilation for reasons
+     independent of the particular header file, with 'make -o
+     HEADERFILE'.  If several header files are involved, use a separate
+     '-o' option for each header file.
+
+  2. Touch all the object files with 'make -t'.
+
+
+File: make.info,  Node: Overriding,  Next: Testing,  Prev: Avoiding Compilation,  Up: Running
+
+9.5 Overriding Variables
+========================
+
+An argument that contains '=' specifies the value of a variable: 'V=X'
+sets the value of the variable V to X.  If you specify a value in this
+way, all ordinary assignments of the same variable in the makefile are
+ignored; we say they have been "overridden" by the command line
+argument.
+
+   The most common way to use this facility is to pass extra flags to
+compilers.  For example, in a properly written makefile, the variable
+'CFLAGS' is included in each recipe that runs the C compiler, so a file
+'foo.c' would be compiled something like this:
+
+     cc -c $(CFLAGS) foo.c
+
+   Thus, whatever value you set for 'CFLAGS' affects each compilation
+that occurs.  The makefile probably specifies the usual value for
+'CFLAGS', like this:
+
+     CFLAGS=-g
+
+   Each time you run 'make', you can override this value if you wish.
+For example, if you say 'make CFLAGS='-g -O'', each C compilation will
+be done with 'cc -c -g -O'.  (This also illustrates how you can use
+quoting in the shell to enclose spaces and other special characters in
+the value of a variable when you override it.)
+
+   The variable 'CFLAGS' is only one of many standard variables that
+exist just so that you can change them this way.  *Note Variables Used
+by Implicit Rules: Implicit Variables, for a complete list.
+
+   You can also program the makefile to look at additional variables of
+your own, giving the user the ability to control other aspects of how
+the makefile works by changing the variables.
+
+   When you override a variable with a command line argument, you can
+define either a recursively-expanded variable or a simply-expanded
+variable.  The examples shown above make a recursively-expanded
+variable; to make a simply-expanded variable, write ':=' or '::='
+instead of '='.  But, unless you want to include a variable reference or
+function call in the _value_ that you specify, it makes no difference
+which kind of variable you create.
+
+   There is one way that the makefile can change a variable that you
+have overridden.  This is to use the 'override' directive, which is a
+line that looks like this: 'override VARIABLE = VALUE' (*note The
+'override' Directive: Override Directive.).
+
+
+File: make.info,  Node: Testing,  Next: Options Summary,  Prev: Overriding,  Up: Running
+
+9.6 Testing the Compilation of a Program
+========================================
+
+Normally, when an error happens in executing a shell command, 'make'
+gives up immediately, returning a nonzero status.  No further recipes
+are executed for any target.  The error implies that the goal cannot be
+correctly remade, and 'make' reports this as soon as it knows.
+
+   When you are compiling a program that you have just changed, this is
+not what you want.  Instead, you would rather that 'make' try compiling
+every file that can be tried, to show you as many compilation errors as
+possible.
+
+   On these occasions, you should use the '-k' or '--keep-going' flag.
+This tells 'make' to continue to consider the other prerequisites of the
+pending targets, remaking them if necessary, before it gives up and
+returns nonzero status.  For example, after an error in compiling one
+object file, 'make -k' will continue compiling other object files even
+though it already knows that linking them will be impossible.  In
+addition to continuing after failed shell commands, 'make -k' will
+continue as much as possible after discovering that it does not know how
+to make a target or prerequisite file.  This will always cause an error
+message, but without '-k', it is a fatal error (*note Summary of
+Options: Options Summary.).
+
+   The usual behavior of 'make' assumes that your purpose is to get the
+goals up to date; once 'make' learns that this is impossible, it might
+as well report the failure immediately.  The '-k' flag says that the
+real purpose is to test as much as possible of the changes made in the
+program, perhaps to find several independent problems so that you can
+correct them all before the next attempt to compile.  This is why Emacs'
+'M-x compile' command passes the '-k' flag by default.
+
+
+File: make.info,  Node: Options Summary,  Prev: Testing,  Up: Running
+
+9.7 Summary of Options
+======================
+
+Here is a table of all the options 'make' understands:
+
+'-b'
+'-m'
+     These options are ignored for compatibility with other versions of
+     'make'.
+
+'-B'
+'--always-make'
+     Consider all targets out-of-date.  GNU 'make' proceeds to consider
+     targets and their prerequisites using the normal algorithms;
+     however, all targets so considered are always remade regardless of
+     the status of their prerequisites.  To avoid infinite recursion, if
+     'MAKE_RESTARTS' (*note Other Special Variables: Special Variables.)
+     is set to a number greater than 0 this option is disabled when
+     considering whether to remake makefiles (*note How Makefiles Are
+     Remade: Remaking Makefiles.).
+
+'-C DIR'
+'--directory=DIR'
+     Change to directory DIR before reading the makefiles.  If multiple
+     '-C' options are specified, each is interpreted relative to the
+     previous one: '-C / -C etc' is equivalent to '-C /etc'.  This is
+     typically used with recursive invocations of 'make' (*note
+     Recursive Use of 'make': Recursion.).
+
+'-d'
+
+     Print debugging information in addition to normal processing.  The
+     debugging information says which files are being considered for
+     remaking, which file-times are being compared and with what
+     results, which files actually need to be remade, which implicit
+     rules are considered and which are applied--everything interesting
+     about how 'make' decides what to do.  The '-d' option is equivalent
+     to '--debug=a' (see below).
+
+'--debug[=OPTIONS]'
+
+     Print debugging information in addition to normal processing.
+     Various levels and types of output can be chosen.  With no
+     arguments, print the "basic" level of debugging.  Possible
+     arguments are below; only the first character is considered, and
+     values must be comma- or space-separated.
+
+     'a (all)'
+          All types of debugging output are enabled.  This is equivalent
+          to using '-d'.
+
+     'b (basic)'
+          Basic debugging prints each target that was found to be
+          out-of-date, and whether the build was successful or not.
+
+     'v (verbose)'
+          A level above 'basic'; includes messages about which makefiles
+          were parsed, prerequisites that did not need to be rebuilt,
+          etc.  This option also enables 'basic' messages.
+
+     'i (implicit)'
+          Prints messages describing the implicit rule searches for each
+          target.  This option also enables 'basic' messages.
+
+     'j (jobs)'
+          Prints messages giving details on the invocation of specific
+          sub-commands.
+
+     'm (makefile)'
+          By default, the above messages are not enabled while trying to
+          remake the makefiles.  This option enables messages while
+          rebuilding makefiles, too.  Note that the 'all' option does
+          enable this option.  This option also enables 'basic'
+          messages.
+
+     'n (none)'
+          Disable all debugging currently enabled.  If additional
+          debugging flags are encountered after this they will still
+          take effect.
+
+'-e'
+'--environment-overrides'
+     Give variables taken from the environment precedence over variables
+     from makefiles.  *Note Variables from the Environment: Environment.
+
+'--eval=STRING'
+
+     Evaluate STRING as makefile syntax.  This is a command-line version
+     of the 'eval' function (*note Eval Function::).  The evaluation is
+     performed after the default rules and variables have been defined,
+     but before any makefiles are read.
+
+'-f FILE'
+'--file=FILE'
+'--makefile=FILE'
+     Read the file named FILE as a makefile.  *Note Writing Makefiles:
+     Makefiles.
+
+'-h'
+'--help'
+
+     Remind you of the options that 'make' understands and then exit.
+
+'-i'
+'--ignore-errors'
+     Ignore all errors in recipes executed to remake files.  *Note
+     Errors in Recipes: Errors.
+
+'-I DIR'
+'--include-dir=DIR'
+     Specifies a directory DIR to search for included makefiles.  *Note
+     Including Other Makefiles: Include.  If several '-I' options are
+     used to specify several directories, the directories are searched
+     in the order specified.
+
+'-j [JOBS]'
+'--jobs[=JOBS]'
+     Specifies the number of recipes (jobs) to run simultaneously.  With
+     no argument, 'make' runs as many recipes simultaneously as
+     possible.  If there is more than one '-j' option, the last one is
+     effective.  *Note Parallel Execution: Parallel, for more
+     information on how recipes are run.  Note that this option is
+     ignored on MS-DOS.
+
+'-k'
+'--keep-going'
+     Continue as much as possible after an error.  While the target that
+     failed, and those that depend on it, cannot be remade, the other
+     prerequisites of these targets can be processed all the same.
+     *Note Testing the Compilation of a Program: Testing.
+
+'-l [LOAD]'
+'--load-average[=LOAD]'
+'--max-load[=LOAD]'
+     Specifies that no new recipes should be started if there are other
+     recipes running and the load average is at least LOAD (a
+     floating-point number).  With no argument, removes a previous load
+     limit.  *Note Parallel Execution: Parallel.
+
+'-L'
+'--check-symlink-times'
+     On systems that support symbolic links, this option causes 'make'
+     to consider the timestamps on any symbolic links in addition to the
+     timestamp on the file referenced by those links.  When this option
+     is provided, the most recent timestamp among the file and the
+     symbolic links is taken as the modification time for this target
+     file.
+
+'-n'
+'--just-print'
+'--dry-run'
+'--recon'
+
+     Print the recipe that would be executed, but do not execute it
+     (except in certain circumstances).  *Note Instead of Executing
+     Recipes: Instead of Execution.
+
+'-o FILE'
+'--old-file=FILE'
+'--assume-old=FILE'
+     Do not remake the file FILE even if it is older than its
+     prerequisites, and do not remake anything on account of changes in
+     FILE.  Essentially the file is treated as very old and its rules
+     are ignored.  *Note Avoiding Recompilation of Some Files: Avoiding
+     Compilation.
+
+'-O[TYPE]'
+'--output-sync[=TYPE]'
+     Ensure that the complete output from each recipe is printed in one
+     uninterrupted sequence.  This option is only useful when using the
+     '--jobs' option to run multiple recipes simultaneously (*note
+     Parallel Execution: Parallel.) Without this option output will be
+     displayed as it is generated by the recipes.
+
+     With no type or the type 'target', output from the entire recipe of
+     each target is grouped together.  With the type 'line', output from
+     each line in the recipe is grouped together.  With the type
+     'recurse', the output from an entire recursive make is grouped
+     together.  With the type 'none', no output synchronization is
+     performed.  *Note Output During Parallel Execution: Parallel
+     Output.
+
+'-p'
+'--print-data-base'
+     Print the data base (rules and variable values) that results from
+     reading the makefiles; then execute as usual or as otherwise
+     specified.  This also prints the version information given by the
+     '-v' switch (see below).  To print the data base without trying to
+     remake any files, use 'make -qp'.  To print the data base of
+     predefined rules and variables, use 'make -p -f /dev/null'.  The
+     data base output contains file name and line number information for
+     recipe and variable definitions, so it can be a useful debugging
+     tool in complex environments.
+
+'-q'
+'--question'
+     "Question mode".  Do not run any recipes, or print anything; just
+     return an exit status that is zero if the specified targets are
+     already up to date, one if any remaking is required, or two if an
+     error is encountered.  *Note Instead of Executing Recipes: Instead
+     of Execution.
+
+'-r'
+'--no-builtin-rules'
+     Eliminate use of the built-in implicit rules (*note Using Implicit
+     Rules: Implicit Rules.).  You can still define your own by writing
+     pattern rules (*note Defining and Redefining Pattern Rules: Pattern
+     Rules.).  The '-r' option also clears out the default list of
+     suffixes for suffix rules (*note Old-Fashioned Suffix Rules: Suffix
+     Rules.).  But you can still define your own suffixes with a rule
+     for '.SUFFIXES', and then define your own suffix rules.  Note that
+     only _rules_ are affected by the '-r' option; default variables
+     remain in effect (*note Variables Used by Implicit Rules: Implicit
+     Variables.); see the '-R' option below.
+
+'-R'
+'--no-builtin-variables'
+     Eliminate use of the built-in rule-specific variables (*note
+     Variables Used by Implicit Rules: Implicit Variables.).  You can
+     still define your own, of course.  The '-R' option also
+     automatically enables the '-r' option (see above), since it doesn't
+     make sense to have implicit rules without any definitions for the
+     variables that they use.
+
+'-s'
+'--silent'
+'--quiet'
+
+     Silent operation; do not print the recipes as they are executed.
+     *Note Recipe Echoing: Echoing.
+
+'-S'
+'--no-keep-going'
+'--stop'
+
+     Cancel the effect of the '-k' option.  This is never necessary
+     except in a recursive 'make' where '-k' might be inherited from the
+     top-level 'make' via 'MAKEFLAGS' (*note Recursive Use of 'make':
+     Recursion.) or if you set '-k' in 'MAKEFLAGS' in your environment.
+
+'-t'
+'--touch'
+
+     Touch files (mark them up to date without really changing them)
+     instead of running their recipes.  This is used to pretend that the
+     recipes were done, in order to fool future invocations of 'make'.
+     *Note Instead of Executing Recipes: Instead of Execution.
+
+'--trace'
+     Show tracing information for 'make' execution.  Prints the entire
+     recipe to be executed, even for recipes that are normally silent
+     (due to '.SILENT' or '@').  Also prints the makefile name and line
+     number where the recipe was defined, and information on why the
+     target is being rebuilt.
+
+'-v'
+'--version'
+     Print the version of the 'make' program plus a copyright, a list of
+     authors, and a notice that there is no warranty; then exit.
+
+'-w'
+'--print-directory'
+     Print a message containing the working directory both before and
+     after executing the makefile.  This may be useful for tracking down
+     errors from complicated nests of recursive 'make' commands.  *Note
+     Recursive Use of 'make': Recursion.  (In practice, you rarely need
+     to specify this option since 'make' does it for you; see *note The
+     '--print-directory' Option: -w Option.)
+
+'--no-print-directory'
+     Disable printing of the working directory under '-w'.  This option
+     is useful when '-w' is turned on automatically, but you do not want
+     to see the extra messages.  *Note The '--print-directory' Option:
+     -w Option.
+
+'-W FILE'
+'--what-if=FILE'
+'--new-file=FILE'
+'--assume-new=FILE'
+     Pretend that the target FILE has just been modified.  When used
+     with the '-n' flag, this shows you what would happen if you were to
+     modify that file.  Without '-n', it is almost the same as running a
+     'touch' command on the given file before running 'make', except
+     that the modification time is changed only in the imagination of
+     'make'.  *Note Instead of Executing Recipes: Instead of Execution.
+
+'--warn-undefined-variables'
+     Issue a warning message whenever 'make' sees a reference to an
+     undefined variable.  This can be helpful when you are trying to
+     debug makefiles which use variables in complex ways.
+
diff --git a/doc/make.info-2 b/doc/make.info-2
new file mode 100644
index 0000000..c6229ff
--- /dev/null
+++ b/doc/make.info-2
@@ -0,0 +1,5884 @@
+This is make.info, produced by makeinfo version 5.2 from make.texi.
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.73, last updated 5 October 2014, of 'The GNU Make
+Manual', for GNU 'make' version 4.1.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* Make: (make).            Remake files automatically.
+END-INFO-DIR-ENTRY
+
+
+File: make.info,  Node: Implicit Rules,  Next: Archives,  Prev: Running,  Up: Top
+
+10 Using Implicit Rules
+***********************
+
+Certain standard ways of remaking target files are used very often.  For
+example, one customary way to make an object file is from a C source
+file using the C compiler, 'cc'.
+
+   "Implicit rules" tell 'make' how to use customary techniques so that
+you do not have to specify them in detail when you want to use them.
+For example, there is an implicit rule for C compilation.  File names
+determine which implicit rules are run.  For example, C compilation
+typically takes a '.c' file and makes a '.o' file.  So 'make' applies
+the implicit rule for C compilation when it sees this combination of
+file name endings.
+
+   A chain of implicit rules can apply in sequence; for example, 'make'
+will remake a '.o' file from a '.y' file by way of a '.c' file.
+
+   The built-in implicit rules use several variables in their recipes so
+that, by changing the values of the variables, you can change the way
+the implicit rule works.  For example, the variable 'CFLAGS' controls
+the flags given to the C compiler by the implicit rule for C
+compilation.
+
+   You can define your own implicit rules by writing "pattern rules".
+
+   "Suffix rules" are a more limited way to define implicit rules.
+Pattern rules are more general and clearer, but suffix rules are
+retained for compatibility.
+
+* Menu:
+
+* Using Implicit::              How to use an existing implicit rule
+                                  to get the recipes for updating a file.
+* Catalogue of Rules::          A list of built-in rules.
+* Implicit Variables::          How to change what predefined rules do.
+* Chained Rules::               How to use a chain of implicit rules.
+* Pattern Rules::               How to define new implicit rules.
+* Last Resort::                 How to define a recipe for rules which
+                                  cannot find any.
+* Suffix Rules::                The old-fashioned style of implicit rule.
+* Implicit Rule Search::        The precise algorithm for applying
+                                  implicit rules.
+
+
+File: make.info,  Node: Using Implicit,  Next: Catalogue of Rules,  Prev: Implicit Rules,  Up: Implicit Rules
+
+10.1 Using Implicit Rules
+=========================
+
+To allow 'make' to find a customary method for updating a target file,
+all you have to do is refrain from specifying recipes yourself.  Either
+write a rule with no recipe, or don't write a rule at all.  Then 'make'
+will figure out which implicit rule to use based on which kind of source
+file exists or can be made.
+
+   For example, suppose the makefile looks like this:
+
+     foo : foo.o bar.o
+             cc -o foo foo.o bar.o $(CFLAGS) $(LDFLAGS)
+
+Because you mention 'foo.o' but do not give a rule for it, 'make' will
+automatically look for an implicit rule that tells how to update it.
+This happens whether or not the file 'foo.o' currently exists.
+
+   If an implicit rule is found, it can supply both a recipe and one or
+more prerequisites (the source files).  You would want to write a rule
+for 'foo.o' with no recipe if you need to specify additional
+prerequisites, such as header files, that the implicit rule cannot
+supply.
+
+   Each implicit rule has a target pattern and prerequisite patterns.
+There may be many implicit rules with the same target pattern.  For
+example, numerous rules make '.o' files: one, from a '.c' file with the
+C compiler; another, from a '.p' file with the Pascal compiler; and so
+on.  The rule that actually applies is the one whose prerequisites exist
+or can be made.  So, if you have a file 'foo.c', 'make' will run the C
+compiler; otherwise, if you have a file 'foo.p', 'make' will run the
+Pascal compiler; and so on.
+
+   Of course, when you write the makefile, you know which implicit rule
+you want 'make' to use, and you know it will choose that one because you
+know which possible prerequisite files are supposed to exist.  *Note
+Catalogue of Built-In Rules: Catalogue of Rules, for a catalogue of all
+the predefined implicit rules.
+
+   Above, we said an implicit rule applies if the required prerequisites
+"exist or can be made".  A file "can be made" if it is mentioned
+explicitly in the makefile as a target or a prerequisite, or if an
+implicit rule can be recursively found for how to make it.  When an
+implicit prerequisite is the result of another implicit rule, we say
+that "chaining" is occurring.  *Note Chains of Implicit Rules: Chained
+Rules.
+
+   In general, 'make' searches for an implicit rule for each target, and
+for each double-colon rule, that has no recipe.  A file that is
+mentioned only as a prerequisite is considered a target whose rule
+specifies nothing, so implicit rule search happens for it.  *Note
+Implicit Rule Search Algorithm: Implicit Rule Search, for the details of
+how the search is done.
+
+   Note that explicit prerequisites do not influence implicit rule
+search.  For example, consider this explicit rule:
+
+     foo.o: foo.p
+
+The prerequisite on 'foo.p' does not necessarily mean that 'make' will
+remake 'foo.o' according to the implicit rule to make an object file, a
+'.o' file, from a Pascal source file, a '.p' file.  For example, if
+'foo.c' also exists, the implicit rule to make an object file from a C
+source file is used instead, because it appears before the Pascal rule
+in the list of predefined implicit rules (*note Catalogue of Built-In
+Rules: Catalogue of Rules.).
+
+   If you do not want an implicit rule to be used for a target that has
+no recipe, you can give that target an empty recipe by writing a
+semicolon (*note Defining Empty Recipes: Empty Recipes.).
+
+
+File: make.info,  Node: Catalogue of Rules,  Next: Implicit Variables,  Prev: Using Implicit,  Up: Implicit Rules
+
+10.2 Catalogue of Built-In Rules
+================================
+
+Here is a catalogue of predefined implicit rules which are always
+available unless the makefile explicitly overrides or cancels them.
+*Note Canceling Implicit Rules: Canceling Rules, for information on
+canceling or overriding an implicit rule.  The '-r' or
+'--no-builtin-rules' option cancels all predefined rules.
+
+   This manual only documents the default rules available on POSIX-based
+operating systems.  Other operating systems, such as VMS, Windows, OS/2,
+etc.  may have different sets of default rules.  To see the full list of
+default rules and variables available in your version of GNU 'make', run
+'make -p' in a directory with no makefile.
+
+   Not all of these rules will always be defined, even when the '-r'
+option is not given.  Many of the predefined implicit rules are
+implemented in 'make' as suffix rules, so which ones will be defined
+depends on the "suffix list" (the list of prerequisites of the special
+target '.SUFFIXES').  The default suffix list is: '.out', '.a', '.ln',
+'.o', '.c', '.cc', '.C', '.cpp', '.p', '.f', '.F', '.m', '.r', '.y',
+'.l', '.ym', '.lm', '.s', '.S', '.mod', '.sym', '.def', '.h', '.info',
+'.dvi', '.tex', '.texinfo', '.texi', '.txinfo', '.w', '.ch' '.web',
+'.sh', '.elc', '.el'.  All of the implicit rules described below whose
+prerequisites have one of these suffixes are actually suffix rules.  If
+you modify the suffix list, the only predefined suffix rules in effect
+will be those named by one or two of the suffixes that are on the list
+you specify; rules whose suffixes fail to be on the list are disabled.
+*Note Old-Fashioned Suffix Rules: Suffix Rules, for full details on
+suffix rules.
+
+Compiling C programs
+     'N.o' is made automatically from 'N.c' with a recipe of the form
+     '$(CC) $(CPPFLAGS) $(CFLAGS) -c'.
+
+Compiling C++ programs
+     'N.o' is made automatically from 'N.cc', 'N.cpp', or 'N.C' with a
+     recipe of the form '$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c'.  We
+     encourage you to use the suffix '.cc' for C++ source files instead
+     of '.C'.
+
+Compiling Pascal programs
+     'N.o' is made automatically from 'N.p' with the recipe '$(PC)
+     $(PFLAGS) -c'.
+
+Compiling Fortran and Ratfor programs
+     'N.o' is made automatically from 'N.r', 'N.F' or 'N.f' by running
+     the Fortran compiler.  The precise recipe used is as follows:
+
+     '.f'
+          '$(FC) $(FFLAGS) -c'.
+     '.F'
+          '$(FC) $(FFLAGS) $(CPPFLAGS) -c'.
+     '.r'
+          '$(FC) $(FFLAGS) $(RFLAGS) -c'.
+
+Preprocessing Fortran and Ratfor programs
+     'N.f' is made automatically from 'N.r' or 'N.F'.  This rule runs
+     just the preprocessor to convert a Ratfor or preprocessable Fortran
+     program into a strict Fortran program.  The precise recipe used is
+     as follows:
+
+     '.F'
+          '$(FC) $(CPPFLAGS) $(FFLAGS) -F'.
+     '.r'
+          '$(FC) $(FFLAGS) $(RFLAGS) -F'.
+
+Compiling Modula-2 programs
+     'N.sym' is made from 'N.def' with a recipe of the form '$(M2C)
+     $(M2FLAGS) $(DEFFLAGS)'.  'N.o' is made from 'N.mod'; the form is:
+     '$(M2C) $(M2FLAGS) $(MODFLAGS)'.
+
+Assembling and preprocessing assembler programs
+     'N.o' is made automatically from 'N.s' by running the assembler,
+     'as'.  The precise recipe is '$(AS) $(ASFLAGS)'.
+
+     'N.s' is made automatically from 'N.S' by running the C
+     preprocessor, 'cpp'.  The precise recipe is '$(CPP) $(CPPFLAGS)'.
+
+Linking a single object file
+     'N' is made automatically from 'N.o' by running the linker (usually
+     called 'ld') via the C compiler.  The precise recipe used is
+     '$(CC) $(LDFLAGS) N.o $(LOADLIBES) $(LDLIBS)'.
+
+     This rule does the right thing for a simple program with only one
+     source file.  It will also do the right thing if there are multiple
+     object files (presumably coming from various other source files),
+     one of which has a name matching that of the executable file.
+     Thus,
+
+          x: y.o z.o
+
+     when 'x.c', 'y.c' and 'z.c' all exist will execute:
+
+          cc -c x.c -o x.o
+          cc -c y.c -o y.o
+          cc -c z.c -o z.o
+          cc x.o y.o z.o -o x
+          rm -f x.o
+          rm -f y.o
+          rm -f z.o
+
+     In more complicated cases, such as when there is no object file
+     whose name derives from the executable file name, you must write an
+     explicit recipe for linking.
+
+     Each kind of file automatically made into '.o' object files will be
+     automatically linked by using the compiler ('$(CC)', '$(FC)' or
+     '$(PC)'; the C compiler '$(CC)' is used to assemble '.s' files)
+     without the '-c' option.  This could be done by using the '.o'
+     object files as intermediates, but it is faster to do the compiling
+     and linking in one step, so that's how it's done.
+
+Yacc for C programs
+     'N.c' is made automatically from 'N.y' by running Yacc with the
+     recipe '$(YACC) $(YFLAGS)'.
+
+Lex for C programs
+     'N.c' is made automatically from 'N.l' by running Lex.  The actual
+     recipe is '$(LEX) $(LFLAGS)'.
+
+Lex for Ratfor programs
+     'N.r' is made automatically from 'N.l' by running Lex.  The actual
+     recipe is '$(LEX) $(LFLAGS)'.
+
+     The convention of using the same suffix '.l' for all Lex files
+     regardless of whether they produce C code or Ratfor code makes it
+     impossible for 'make' to determine automatically which of the two
+     languages you are using in any particular case.  If 'make' is
+     called upon to remake an object file from a '.l' file, it must
+     guess which compiler to use.  It will guess the C compiler, because
+     that is more common.  If you are using Ratfor, make sure 'make'
+     knows this by mentioning 'N.r' in the makefile.  Or, if you are
+     using Ratfor exclusively, with no C files, remove '.c' from the
+     list of implicit rule suffixes with:
+
+          .SUFFIXES:
+          .SUFFIXES: .o .r .f .l ...
+
+Making Lint Libraries from C, Yacc, or Lex programs
+     'N.ln' is made from 'N.c' by running 'lint'.  The precise recipe is
+     '$(LINT) $(LINTFLAGS) $(CPPFLAGS) -i'.  The same recipe is used on
+     the C code produced from 'N.y' or 'N.l'.
+
+TeX and Web
+     'N.dvi' is made from 'N.tex' with the recipe '$(TEX)'.  'N.tex' is
+     made from 'N.web' with '$(WEAVE)', or from 'N.w' (and from 'N.ch'
+     if it exists or can be made) with '$(CWEAVE)'.  'N.p' is made from
+     'N.web' with '$(TANGLE)' and 'N.c' is made from 'N.w' (and from
+     'N.ch' if it exists or can be made) with '$(CTANGLE)'.
+
+Texinfo and Info
+     'N.dvi' is made from 'N.texinfo', 'N.texi', or 'N.txinfo', with the
+     recipe '$(TEXI2DVI) $(TEXI2DVI_FLAGS)'.  'N.info' is made from
+     'N.texinfo', 'N.texi', or 'N.txinfo', with the recipe
+     '$(MAKEINFO) $(MAKEINFO_FLAGS)'.
+
+RCS
+     Any file 'N' is extracted if necessary from an RCS file named
+     either 'N,v' or 'RCS/N,v'.  The precise recipe used is
+     '$(CO) $(COFLAGS)'.  'N' will not be extracted from RCS if it
+     already exists, even if the RCS file is newer.  The rules for RCS
+     are terminal (*note Match-Anything Pattern Rules: Match-Anything
+     Rules.), so RCS files cannot be generated from another source; they
+     must actually exist.
+
+SCCS
+     Any file 'N' is extracted if necessary from an SCCS file named
+     either 's.N' or 'SCCS/s.N'.  The precise recipe used is
+     '$(GET) $(GFLAGS)'.  The rules for SCCS are terminal (*note
+     Match-Anything Pattern Rules: Match-Anything Rules.), so SCCS files
+     cannot be generated from another source; they must actually exist.
+
+     For the benefit of SCCS, a file 'N' is copied from 'N.sh' and made
+     executable (by everyone).  This is for shell scripts that are
+     checked into SCCS. Since RCS preserves the execution permission of
+     a file, you do not need to use this feature with RCS.
+
+     We recommend that you avoid using of SCCS. RCS is widely held to be
+     superior, and is also free.  By choosing free software in place of
+     comparable (or inferior) proprietary software, you support the free
+     software movement.
+
+   Usually, you want to change only the variables listed in the table
+above, which are documented in the following section.
+
+   However, the recipes in built-in implicit rules actually use
+variables such as 'COMPILE.c', 'LINK.p', and 'PREPROCESS.S', whose
+values contain the recipes listed above.
+
+   'make' follows the convention that the rule to compile a '.X' source
+file uses the variable 'COMPILE.X'.  Similarly, the rule to produce an
+executable from a '.X' file uses 'LINK.X'; and the rule to preprocess a
+'.X' file uses 'PREPROCESS.X'.
+
+   Every rule that produces an object file uses the variable
+'OUTPUT_OPTION'.  'make' defines this variable either to contain '-o
+$@', or to be empty, depending on a compile-time option.  You need the
+'-o' option to ensure that the output goes into the right file when the
+source file is in a different directory, as when using 'VPATH' (*note
+Directory Search::).  However, compilers on some systems do not accept a
+'-o' switch for object files.  If you use such a system, and use
+'VPATH', some compilations will put their output in the wrong place.  A
+possible workaround for this problem is to give 'OUTPUT_OPTION' the
+value '; mv $*.o $@'.
+
+
+File: make.info,  Node: Implicit Variables,  Next: Chained Rules,  Prev: Catalogue of Rules,  Up: Implicit Rules
+
+10.3 Variables Used by Implicit Rules
+=====================================
+
+The recipes in built-in implicit rules make liberal use of certain
+predefined variables.  You can alter the values of these variables in
+the makefile, with arguments to 'make', or in the environment to alter
+how the implicit rules work without redefining the rules themselves.
+You can cancel all variables used by implicit rules with the '-R' or
+'--no-builtin-variables' option.
+
+   For example, the recipe used to compile a C source file actually says
+'$(CC) -c $(CFLAGS) $(CPPFLAGS)'.  The default values of the variables
+used are 'cc' and nothing, resulting in the command 'cc -c'.  By
+redefining 'CC' to 'ncc', you could cause 'ncc' to be used for all C
+compilations performed by the implicit rule.  By redefining 'CFLAGS' to
+be '-g', you could pass the '-g' option to each compilation.  _All_
+implicit rules that do C compilation use '$(CC)' to get the program name
+for the compiler and _all_ include '$(CFLAGS)' among the arguments given
+to the compiler.
+
+   The variables used in implicit rules fall into two classes: those
+that are names of programs (like 'CC') and those that contain arguments
+for the programs (like 'CFLAGS').  (The "name of a program" may also
+contain some command arguments, but it must start with an actual
+executable program name.)  If a variable value contains more than one
+argument, separate them with spaces.
+
+   The following tables describe of some of the more commonly-used
+predefined variables.  This list is not exhaustive, and the default
+values shown here may not be what 'make' selects for your environment.
+To see the complete list of predefined variables for your instance of
+GNU 'make' you can run 'make -p' in a directory with no makefiles.
+
+   Here is a table of some of the more common variables used as names of
+programs in built-in rules:
+
+'AR'
+     Archive-maintaining program; default 'ar'.
+
+'AS'
+     Program for compiling assembly files; default 'as'.
+
+'CC'
+     Program for compiling C programs; default 'cc'.
+
+'CXX'
+     Program for compiling C++ programs; default 'g++'.
+
+'CPP'
+     Program for running the C preprocessor, with results to standard
+     output; default '$(CC) -E'.
+
+'FC'
+     Program for compiling or preprocessing Fortran and Ratfor programs;
+     default 'f77'.
+
+'M2C'
+     Program to use to compile Modula-2 source code; default 'm2c'.
+
+'PC'
+     Program for compiling Pascal programs; default 'pc'.
+
+'CO'
+     Program for extracting a file from RCS; default 'co'.
+
+'GET'
+     Program for extracting a file from SCCS; default 'get'.
+
+'LEX'
+     Program to use to turn Lex grammars into source code; default
+     'lex'.
+
+'YACC'
+     Program to use to turn Yacc grammars into source code; default
+     'yacc'.
+
+'LINT'
+     Program to use to run lint on source code; default 'lint'.
+
+'MAKEINFO'
+     Program to convert a Texinfo source file into an Info file; default
+     'makeinfo'.
+
+'TEX'
+     Program to make TeX DVI files from TeX source; default 'tex'.
+
+'TEXI2DVI'
+     Program to make TeX DVI files from Texinfo source; default
+     'texi2dvi'.
+
+'WEAVE'
+     Program to translate Web into TeX; default 'weave'.
+
+'CWEAVE'
+     Program to translate C Web into TeX; default 'cweave'.
+
+'TANGLE'
+     Program to translate Web into Pascal; default 'tangle'.
+
+'CTANGLE'
+     Program to translate C Web into C; default 'ctangle'.
+
+'RM'
+     Command to remove a file; default 'rm -f'.
+
+   Here is a table of variables whose values are additional arguments
+for the programs above.  The default values for all of these is the
+empty string, unless otherwise noted.
+
+'ARFLAGS'
+     Flags to give the archive-maintaining program; default 'rv'.
+
+'ASFLAGS'
+     Extra flags to give to the assembler (when explicitly invoked on a
+     '.s' or '.S' file).
+
+'CFLAGS'
+     Extra flags to give to the C compiler.
+
+'CXXFLAGS'
+     Extra flags to give to the C++ compiler.
+
+'COFLAGS'
+     Extra flags to give to the RCS 'co' program.
+
+'CPPFLAGS'
+     Extra flags to give to the C preprocessor and programs that use it
+     (the C and Fortran compilers).
+
+'FFLAGS'
+     Extra flags to give to the Fortran compiler.
+
+'GFLAGS'
+     Extra flags to give to the SCCS 'get' program.
+
+'LDFLAGS'
+     Extra flags to give to compilers when they are supposed to invoke
+     the linker, 'ld', such as '-L'.  Libraries ('-lfoo') should be
+     added to the 'LDLIBS' variable instead.
+
+'LDLIBS'
+     Library flags or names given to compilers when they are supposed to
+     invoke the linker, 'ld'.  'LOADLIBES' is a deprecated (but still
+     supported) alternative to 'LDLIBS'.  Non-library linker flags, such
+     as '-L', should go in the 'LDFLAGS' variable.
+
+'LFLAGS'
+     Extra flags to give to Lex.
+
+'YFLAGS'
+     Extra flags to give to Yacc.
+
+'PFLAGS'
+     Extra flags to give to the Pascal compiler.
+
+'RFLAGS'
+     Extra flags to give to the Fortran compiler for Ratfor programs.
+
+'LINTFLAGS'
+     Extra flags to give to lint.
+
+
+File: make.info,  Node: Chained Rules,  Next: Pattern Rules,  Prev: Implicit Variables,  Up: Implicit Rules
+
+10.4 Chains of Implicit Rules
+=============================
+
+Sometimes a file can be made by a sequence of implicit rules.  For
+example, a file 'N.o' could be made from 'N.y' by running first Yacc and
+then 'cc'.  Such a sequence is called a "chain".
+
+   If the file 'N.c' exists, or is mentioned in the makefile, no special
+searching is required: 'make' finds that the object file can be made by
+C compilation from 'N.c'; later on, when considering how to make 'N.c',
+the rule for running Yacc is used.  Ultimately both 'N.c' and 'N.o' are
+updated.
+
+   However, even if 'N.c' does not exist and is not mentioned, 'make'
+knows how to envision it as the missing link between 'N.o' and 'N.y'!
+In this case, 'N.c' is called an "intermediate file".  Once 'make' has
+decided to use the intermediate file, it is entered in the data base as
+if it had been mentioned in the makefile, along with the implicit rule
+that says how to create it.
+
+   Intermediate files are remade using their rules just like all other
+files.  But intermediate files are treated differently in two ways.
+
+   The first difference is what happens if the intermediate file does
+not exist.  If an ordinary file B does not exist, and 'make' considers a
+target that depends on B, it invariably creates B and then updates the
+target from B.  But if B is an intermediate file, then 'make' can leave
+well enough alone.  It won't bother updating B, or the ultimate target,
+unless some prerequisite of B is newer than that target or there is some
+other reason to update that target.
+
+   The second difference is that if 'make' _does_ create B in order to
+update something else, it deletes B later on after it is no longer
+needed.  Therefore, an intermediate file which did not exist before
+'make' also does not exist after 'make'.  'make' reports the deletion to
+you by printing a 'rm -f' command showing which file it is deleting.
+
+   Ordinarily, a file cannot be intermediate if it is mentioned in the
+makefile as a target or prerequisite.  However, you can explicitly mark
+a file as intermediate by listing it as a prerequisite of the special
+target '.INTERMEDIATE'.  This takes effect even if the file is mentioned
+explicitly in some other way.
+
+   You can prevent automatic deletion of an intermediate file by marking
+it as a "secondary" file.  To do this, list it as a prerequisite of the
+special target '.SECONDARY'.  When a file is secondary, 'make' will not
+create the file merely because it does not already exist, but 'make'
+does not automatically delete the file.  Marking a file as secondary
+also marks it as intermediate.
+
+   You can list the target pattern of an implicit rule (such as '%.o')
+as a prerequisite of the special target '.PRECIOUS' to preserve
+intermediate files made by implicit rules whose target patterns match
+that file's name; see *note Interrupts::.
+
+   A chain can involve more than two implicit rules.  For example, it is
+possible to make a file 'foo' from 'RCS/foo.y,v' by running RCS, Yacc
+and 'cc'.  Then both 'foo.y' and 'foo.c' are intermediate files that are
+deleted at the end.
+
+   No single implicit rule can appear more than once in a chain.  This
+means that 'make' will not even consider such a ridiculous thing as
+making 'foo' from 'foo.o.o' by running the linker twice.  This
+constraint has the added benefit of preventing any infinite loop in the
+search for an implicit rule chain.
+
+   There are some special implicit rules to optimize certain cases that
+would otherwise be handled by rule chains.  For example, making 'foo'
+from 'foo.c' could be handled by compiling and linking with separate
+chained rules, using 'foo.o' as an intermediate file.  But what actually
+happens is that a special rule for this case does the compilation and
+linking with a single 'cc' command.  The optimized rule is used in
+preference to the step-by-step chain because it comes earlier in the
+ordering of rules.
+
+
+File: make.info,  Node: Pattern Rules,  Next: Last Resort,  Prev: Chained Rules,  Up: Implicit Rules
+
+10.5 Defining and Redefining Pattern Rules
+==========================================
+
+You define an implicit rule by writing a "pattern rule".  A pattern rule
+looks like an ordinary rule, except that its target contains the
+character '%' (exactly one of them).  The target is considered a pattern
+for matching file names; the '%' can match any nonempty substring, while
+other characters match only themselves.  The prerequisites likewise use
+'%' to show how their names relate to the target name.
+
+   Thus, a pattern rule '%.o : %.c' says how to make any file 'STEM.o'
+from another file 'STEM.c'.
+
+   Note that expansion using '%' in pattern rules occurs *after* any
+variable or function expansions, which take place when the makefile is
+read.  *Note How to Use Variables: Using Variables, and *note Functions
+for Transforming Text: Functions.
+
+* Menu:
+
+* Pattern Intro::               An introduction to pattern rules.
+* Pattern Examples::            Examples of pattern rules.
+* Automatic Variables::         How to use automatic variables in the
+                                  recipe of implicit rules.
+* Pattern Match::               How patterns match.
+* Match-Anything Rules::        Precautions you should take prior to
+                                  defining rules that can match any
+                                  target file whatever.
+* Canceling Rules::             How to override or cancel built-in rules.
+
+
+File: make.info,  Node: Pattern Intro,  Next: Pattern Examples,  Prev: Pattern Rules,  Up: Pattern Rules
+
+10.5.1 Introduction to Pattern Rules
+------------------------------------
+
+A pattern rule contains the character '%' (exactly one of them) in the
+target; otherwise, it looks exactly like an ordinary rule.  The target
+is a pattern for matching file names; the '%' matches any nonempty
+substring, while other characters match only themselves.
+
+   For example, '%.c' as a pattern matches any file name that ends in
+'.c'.  's.%.c' as a pattern matches any file name that starts with 's.',
+ends in '.c' and is at least five characters long.  (There must be at
+least one character to match the '%'.)  The substring that the '%'
+matches is called the "stem".
+
+   '%' in a prerequisite of a pattern rule stands for the same stem that
+was matched by the '%' in the target.  In order for the pattern rule to
+apply, its target pattern must match the file name under consideration
+and all of its prerequisites (after pattern substitution) must name
+files that exist or can be made.  These files become prerequisites of
+the target.
+
+   Thus, a rule of the form
+
+     %.o : %.c ; RECIPE...
+
+specifies how to make a file 'N.o', with another file 'N.c' as its
+prerequisite, provided that 'N.c' exists or can be made.
+
+   There may also be prerequisites that do not use '%'; such a
+prerequisite attaches to every file made by this pattern rule.  These
+unvarying prerequisites are useful occasionally.
+
+   A pattern rule need not have any prerequisites that contain '%', or
+in fact any prerequisites at all.  Such a rule is effectively a general
+wildcard.  It provides a way to make any file that matches the target
+pattern.  *Note Last Resort::.
+
+   More than one pattern rule may match a target.  In this case 'make'
+will choose the "best fit" rule.  *Note How Patterns Match: Pattern
+Match.
+
+   Pattern rules may have more than one target.  Unlike normal rules,
+this does not act as many different rules with the same prerequisites
+and recipe.  If a pattern rule has multiple targets, 'make' knows that
+the rule's recipe is responsible for making all of the targets.  The
+recipe is executed only once to make all the targets.  When searching
+for a pattern rule to match a target, the target patterns of a rule
+other than the one that matches the target in need of a rule are
+incidental: 'make' worries only about giving a recipe and prerequisites
+to the file presently in question.  However, when this file's recipe is
+run, the other targets are marked as having been updated themselves.
+
+
+File: make.info,  Node: Pattern Examples,  Next: Automatic Variables,  Prev: Pattern Intro,  Up: Pattern Rules
+
+10.5.2 Pattern Rule Examples
+----------------------------
+
+Here are some examples of pattern rules actually predefined in 'make'.
+First, the rule that compiles '.c' files into '.o' files:
+
+     %.o : %.c
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+defines a rule that can make any file 'X.o' from 'X.c'.  The recipe uses
+the automatic variables '$@' and '$<' to substitute the names of the
+target file and the source file in each case where the rule applies
+(*note Automatic Variables::).
+
+   Here is a second built-in rule:
+
+     % :: RCS/%,v
+             $(CO) $(COFLAGS) $<
+
+defines a rule that can make any file 'X' whatsoever from a
+corresponding file 'X,v' in the sub-directory 'RCS'.  Since the target
+is '%', this rule will apply to any file whatever, provided the
+appropriate prerequisite file exists.  The double colon makes the rule
+"terminal", which means that its prerequisite may not be an intermediate
+file (*note Match-Anything Pattern Rules: Match-Anything Rules.).
+
+   This pattern rule has two targets:
+
+     %.tab.c %.tab.h: %.y
+             bison -d $<
+
+This tells 'make' that the recipe 'bison -d X.y' will make both
+'X.tab.c' and 'X.tab.h'.  If the file 'foo' depends on the files
+'parse.tab.o' and 'scan.o' and the file 'scan.o' depends on the file
+'parse.tab.h', when 'parse.y' is changed, the recipe 'bison -d parse.y'
+will be executed only once, and the prerequisites of both 'parse.tab.o'
+and 'scan.o' will be satisfied.  (Presumably the file 'parse.tab.o' will
+be recompiled from 'parse.tab.c' and the file 'scan.o' from 'scan.c',
+while 'foo' is linked from 'parse.tab.o', 'scan.o', and its other
+prerequisites, and it will execute happily ever after.)
+
+
+File: make.info,  Node: Automatic Variables,  Next: Pattern Match,  Prev: Pattern Examples,  Up: Pattern Rules
+
+10.5.3 Automatic Variables
+--------------------------
+
+Suppose you are writing a pattern rule to compile a '.c' file into a
+'.o' file: how do you write the 'cc' command so that it operates on the
+right source file name?  You cannot write the name in the recipe,
+because the name is different each time the implicit rule is applied.
+
+   What you do is use a special feature of 'make', the "automatic
+variables".  These variables have values computed afresh for each rule
+that is executed, based on the target and prerequisites of the rule.  In
+this example, you would use '$@' for the object file name and '$<' for
+the source file name.
+
+   It's very important that you recognize the limited scope in which
+automatic variable values are available: they only have values within
+the recipe.  In particular, you cannot use them anywhere within the
+target list of a rule; they have no value there and will expand to the
+empty string.  Also, they cannot be accessed directly within the
+prerequisite list of a rule.  A common mistake is attempting to use '$@'
+within the prerequisites list; this will not work.  However, there is a
+special feature of GNU 'make', secondary expansion (*note Secondary
+Expansion::), which will allow automatic variable values to be used in
+prerequisite lists.
+
+   Here is a table of automatic variables:
+
+'$@'
+     The file name of the target of the rule.  If the target is an
+     archive member, then '$@' is the name of the archive file.  In a
+     pattern rule that has multiple targets (*note Introduction to
+     Pattern Rules: Pattern Intro.), '$@' is the name of whichever
+     target caused the rule's recipe to be run.
+
+'$%'
+     The target member name, when the target is an archive member.
+     *Note Archives::.  For example, if the target is 'foo.a(bar.o)'
+     then '$%' is 'bar.o' and '$@' is 'foo.a'.  '$%' is empty when the
+     target is not an archive member.
+
+'$<'
+     The name of the first prerequisite.  If the target got its recipe
+     from an implicit rule, this will be the first prerequisite added by
+     the implicit rule (*note Implicit Rules::).
+
+'$?'
+     The names of all the prerequisites that are newer than the target,
+     with spaces between them.  For prerequisites which are archive
+     members, only the named member is used (*note Archives::).
+
+'$^'
+     The names of all the prerequisites, with spaces between them.  For
+     prerequisites which are archive members, only the named member is
+     used (*note Archives::).  A target has only one prerequisite on
+     each other file it depends on, no matter how many times each file
+     is listed as a prerequisite.  So if you list a prerequisite more
+     than once for a target, the value of '$^' contains just one copy of
+     the name.  This list does *not* contain any of the order-only
+     prerequisites; for those see the '$|' variable, below.
+
+'$+'
+     This is like '$^', but prerequisites listed more than once are
+     duplicated in the order they were listed in the makefile.  This is
+     primarily useful for use in linking commands where it is meaningful
+     to repeat library file names in a particular order.
+
+'$|'
+     The names of all the order-only prerequisites, with spaces between
+     them.
+
+'$*'
+     The stem with which an implicit rule matches (*note How Patterns
+     Match: Pattern Match.).  If the target is 'dir/a.foo.b' and the
+     target pattern is 'a.%.b' then the stem is 'dir/foo'.  The stem is
+     useful for constructing names of related files.
+
+     In a static pattern rule, the stem is part of the file name that
+     matched the '%' in the target pattern.
+
+     In an explicit rule, there is no stem; so '$*' cannot be determined
+     in that way.  Instead, if the target name ends with a recognized
+     suffix (*note Old-Fashioned Suffix Rules: Suffix Rules.), '$*' is
+     set to the target name minus the suffix.  For example, if the
+     target name is 'foo.c', then '$*' is set to 'foo', since '.c' is a
+     suffix.  GNU 'make' does this bizarre thing only for compatibility
+     with other implementations of 'make'.  You should generally avoid
+     using '$*' except in implicit rules or static pattern rules.
+
+     If the target name in an explicit rule does not end with a
+     recognized suffix, '$*' is set to the empty string for that rule.
+
+   '$?' is useful even in explicit rules when you wish to operate on
+only the prerequisites that have changed.  For example, suppose that an
+archive named 'lib' is supposed to contain copies of several object
+files.  This rule copies just the changed object files into the archive:
+
+     lib: foo.o bar.o lose.o win.o
+             ar r lib $?
+
+   Of the variables listed above, four have values that are single file
+names, and three have values that are lists of file names.  These seven
+have variants that get just the file's directory name or just the file
+name within the directory.  The variant variables' names are formed by
+appending 'D' or 'F', respectively.  These variants are semi-obsolete in
+GNU 'make' since the functions 'dir' and 'notdir' can be used to get a
+similar effect (*note Functions for File Names: File Name Functions.).
+Note, however, that the 'D' variants all omit the trailing slash which
+always appears in the output of the 'dir' function.  Here is a table of
+the variants:
+
+'$(@D)'
+     The directory part of the file name of the target, with the
+     trailing slash removed.  If the value of '$@' is 'dir/foo.o' then
+     '$(@D)' is 'dir'.  This value is '.' if '$@' does not contain a
+     slash.
+
+'$(@F)'
+     The file-within-directory part of the file name of the target.  If
+     the value of '$@' is 'dir/foo.o' then '$(@F)' is 'foo.o'.  '$(@F)'
+     is equivalent to '$(notdir $@)'.
+
+'$(*D)'
+'$(*F)'
+     The directory part and the file-within-directory part of the stem;
+     'dir' and 'foo' in this example.
+
+'$(%D)'
+'$(%F)'
+     The directory part and the file-within-directory part of the target
+     archive member name.  This makes sense only for archive member
+     targets of the form 'ARCHIVE(MEMBER)' and is useful only when
+     MEMBER may contain a directory name.  (*Note Archive Members as
+     Targets: Archive Members.)
+
+'$(<D)'
+'$(<F)'
+     The directory part and the file-within-directory part of the first
+     prerequisite.
+
+'$(^D)'
+'$(^F)'
+     Lists of the directory parts and the file-within-directory parts of
+     all prerequisites.
+
+'$(+D)'
+'$(+F)'
+     Lists of the directory parts and the file-within-directory parts of
+     all prerequisites, including multiple instances of duplicated
+     prerequisites.
+
+'$(?D)'
+'$(?F)'
+     Lists of the directory parts and the file-within-directory parts of
+     all prerequisites that are newer than the target.
+
+   Note that we use a special stylistic convention when we talk about
+these automatic variables; we write "the value of '$<'", rather than "the variable '<'"
+as we would write for ordinary variables such as 'objects' and 'CFLAGS'.
+We think this convention looks more natural in this special case.
+Please do not assume it has a deep significance; '$<' refers to the
+variable named '<' just as '$(CFLAGS)' refers to the variable named
+'CFLAGS'.  You could just as well use '$(<)' in place of '$<'.
+
+
+File: make.info,  Node: Pattern Match,  Next: Match-Anything Rules,  Prev: Automatic Variables,  Up: Pattern Rules
+
+10.5.4 How Patterns Match
+-------------------------
+
+A target pattern is composed of a '%' between a prefix and a suffix,
+either or both of which may be empty.  The pattern matches a file name
+only if the file name starts with the prefix and ends with the suffix,
+without overlap.  The text between the prefix and the suffix is called
+the "stem".  Thus, when the pattern '%.o' matches the file name
+'test.o', the stem is 'test'.  The pattern rule prerequisites are turned
+into actual file names by substituting the stem for the character '%'.
+Thus, if in the same example one of the prerequisites is written as
+'%.c', it expands to 'test.c'.
+
+   When the target pattern does not contain a slash (and it usually does
+not), directory names in the file names are removed from the file name
+before it is compared with the target prefix and suffix.  After the
+comparison of the file name to the target pattern, the directory names,
+along with the slash that ends them, are added on to the prerequisite
+file names generated from the pattern rule's prerequisite patterns and
+the file name.  The directories are ignored only for the purpose of
+finding an implicit rule to use, not in the application of that rule.
+Thus, 'e%t' matches the file name 'src/eat', with 'src/a' as the stem.
+When prerequisites are turned into file names, the directories from the
+stem are added at the front, while the rest of the stem is substituted
+for the '%'.  The stem 'src/a' with a prerequisite pattern 'c%r' gives
+the file name 'src/car'.
+
+   A pattern rule can be used to build a given file only if there is a
+target pattern that matches the file name, _and_ all prerequisites in
+that rule either exist or can be built.  The rules you write take
+precedence over those that are built in.  Note however, that a rule
+whose prerequisites actually exist or are mentioned always takes
+priority over a rule with prerequisites that must be made by chaining
+other implicit rules.
+
+   It is possible that more than one pattern rule will meet these
+criteria.  In that case, 'make' will choose the rule with the shortest
+stem (that is, the pattern that matches most specifically).  If more
+than one pattern rule has the shortest stem, 'make' will choose the
+first one found in the makefile.
+
+   This algorithm results in more specific rules being preferred over
+more generic ones; for example:
+
+     %.o: %.c
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+     %.o : %.f
+             $(COMPILE.F) $(OUTPUT_OPTION) $<
+
+     lib/%.o: lib/%.c
+             $(CC) -fPIC -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+   Given these rules and asked to build 'bar.o' where both 'bar.c' and
+'bar.f' exist, 'make' will choose the first rule and compile 'bar.c'
+into 'bar.o'.  In the same situation where 'bar.c' does not exist, then
+'make' will choose the second rule and compile 'bar.f' into 'bar.o'.
+
+   If 'make' is asked to build 'lib/bar.o' and both 'lib/bar.c' and
+'lib/bar.f' exist, then the third rule will be chosen since the stem for
+this rule ('bar') is shorter than the stem for the first rule
+('lib/bar').  If 'lib/bar.c' does not exist then the third rule is not
+eligible and the second rule will be used, even though the stem is
+longer.
+
+
+File: make.info,  Node: Match-Anything Rules,  Next: Canceling Rules,  Prev: Pattern Match,  Up: Pattern Rules
+
+10.5.5 Match-Anything Pattern Rules
+-----------------------------------
+
+When a pattern rule's target is just '%', it matches any file name
+whatever.  We call these rules "match-anything" rules.  They are very
+useful, but it can take a lot of time for 'make' to think about them,
+because it must consider every such rule for each file name listed
+either as a target or as a prerequisite.
+
+   Suppose the makefile mentions 'foo.c'.  For this target, 'make' would
+have to consider making it by linking an object file 'foo.c.o', or by C
+compilation-and-linking in one step from 'foo.c.c', or by Pascal
+compilation-and-linking from 'foo.c.p', and many other possibilities.
+
+   We know these possibilities are ridiculous since 'foo.c' is a C
+source file, not an executable.  If 'make' did consider these
+possibilities, it would ultimately reject them, because files such as
+'foo.c.o' and 'foo.c.p' would not exist.  But these possibilities are so
+numerous that 'make' would run very slowly if it had to consider them.
+
+   To gain speed, we have put various constraints on the way 'make'
+considers match-anything rules.  There are two different constraints
+that can be applied, and each time you define a match-anything rule you
+must choose one or the other for that rule.
+
+   One choice is to mark the match-anything rule as "terminal" by
+defining it with a double colon.  When a rule is terminal, it does not
+apply unless its prerequisites actually exist.  Prerequisites that could
+be made with other implicit rules are not good enough.  In other words,
+no further chaining is allowed beyond a terminal rule.
+
+   For example, the built-in implicit rules for extracting sources from
+RCS and SCCS files are terminal; as a result, if the file 'foo.c,v' does
+not exist, 'make' will not even consider trying to make it as an
+intermediate file from 'foo.c,v.o' or from 'RCS/SCCS/s.foo.c,v'.  RCS
+and SCCS files are generally ultimate source files, which should not be
+remade from any other files; therefore, 'make' can save time by not
+looking for ways to remake them.
+
+   If you do not mark the match-anything rule as terminal, then it is
+non-terminal.  A non-terminal match-anything rule cannot apply to a file
+name that indicates a specific type of data.  A file name indicates a
+specific type of data if some non-match-anything implicit rule target
+matches it.
+
+   For example, the file name 'foo.c' matches the target for the pattern
+rule '%.c : %.y' (the rule to run Yacc).  Regardless of whether this
+rule is actually applicable (which happens only if there is a file
+'foo.y'), the fact that its target matches is enough to prevent
+consideration of any non-terminal match-anything rules for the file
+'foo.c'.  Thus, 'make' will not even consider trying to make 'foo.c' as
+an executable file from 'foo.c.o', 'foo.c.c', 'foo.c.p', etc.
+
+   The motivation for this constraint is that non-terminal
+match-anything rules are used for making files containing specific types
+of data (such as executable files) and a file name with a recognized
+suffix indicates some other specific type of data (such as a C source
+file).
+
+   Special built-in dummy pattern rules are provided solely to recognize
+certain file names so that non-terminal match-anything rules will not be
+considered.  These dummy rules have no prerequisites and no recipes, and
+they are ignored for all other purposes.  For example, the built-in
+implicit rule
+
+     %.p :
+
+exists to make sure that Pascal source files such as 'foo.p' match a
+specific target pattern and thereby prevent time from being wasted
+looking for 'foo.p.o' or 'foo.p.c'.
+
+   Dummy pattern rules such as the one for '%.p' are made for every
+suffix listed as valid for use in suffix rules (*note Old-Fashioned
+Suffix Rules: Suffix Rules.).
+
+
+File: make.info,  Node: Canceling Rules,  Prev: Match-Anything Rules,  Up: Pattern Rules
+
+10.5.6 Canceling Implicit Rules
+-------------------------------
+
+You can override a built-in implicit rule (or one you have defined
+yourself) by defining a new pattern rule with the same target and
+prerequisites, but a different recipe.  When the new rule is defined,
+the built-in one is replaced.  The new rule's position in the sequence
+of implicit rules is determined by where you write the new rule.
+
+   You can cancel a built-in implicit rule by defining a pattern rule
+with the same target and prerequisites, but no recipe.  For example, the
+following would cancel the rule that runs the assembler:
+
+     %.o : %.s
+
+
+File: make.info,  Node: Last Resort,  Next: Suffix Rules,  Prev: Pattern Rules,  Up: Implicit Rules
+
+10.6 Defining Last-Resort Default Rules
+=======================================
+
+You can define a last-resort implicit rule by writing a terminal
+match-anything pattern rule with no prerequisites (*note Match-Anything
+Rules::).  This is just like any other pattern rule; the only thing
+special about it is that it will match any target.  So such a rule's
+recipe is used for all targets and prerequisites that have no recipe of
+their own and for which no other implicit rule applies.
+
+   For example, when testing a makefile, you might not care if the
+source files contain real data, only that they exist.  Then you might do
+this:
+
+     %::
+             touch $@
+
+to cause all the source files needed (as prerequisites) to be created
+automatically.
+
+   You can instead define a recipe to be used for targets for which
+there are no rules at all, even ones which don't specify recipes.  You
+do this by writing a rule for the target '.DEFAULT'.  Such a rule's
+recipe is used for all prerequisites which do not appear as targets in
+any explicit rule, and for which no implicit rule applies.  Naturally,
+there is no '.DEFAULT' rule unless you write one.
+
+   If you use '.DEFAULT' with no recipe or prerequisites:
+
+     .DEFAULT:
+
+the recipe previously stored for '.DEFAULT' is cleared.  Then 'make'
+acts as if you had never defined '.DEFAULT' at all.
+
+   If you do not want a target to get the recipe from a match-anything
+pattern rule or '.DEFAULT', but you also do not want any recipe to be
+run for the target, you can give it an empty recipe (*note Defining
+Empty Recipes: Empty Recipes.).
+
+   You can use a last-resort rule to override part of another makefile.
+*Note Overriding Part of Another Makefile: Overriding Makefiles.
+
+
+File: make.info,  Node: Suffix Rules,  Next: Implicit Rule Search,  Prev: Last Resort,  Up: Implicit Rules
+
+10.7 Old-Fashioned Suffix Rules
+===============================
+
+"Suffix rules" are the old-fashioned way of defining implicit rules for
+'make'.  Suffix rules are obsolete because pattern rules are more
+general and clearer.  They are supported in GNU 'make' for compatibility
+with old makefiles.  They come in two kinds: "double-suffix" and
+"single-suffix".
+
+   A double-suffix rule is defined by a pair of suffixes: the target
+suffix and the source suffix.  It matches any file whose name ends with
+the target suffix.  The corresponding implicit prerequisite is made by
+replacing the target suffix with the source suffix in the file name.  A
+two-suffix rule whose target and source suffixes are '.o' and '.c' is
+equivalent to the pattern rule '%.o : %.c'.
+
+   A single-suffix rule is defined by a single suffix, which is the
+source suffix.  It matches any file name, and the corresponding implicit
+prerequisite name is made by appending the source suffix.  A
+single-suffix rule whose source suffix is '.c' is equivalent to the
+pattern rule '% : %.c'.
+
+   Suffix rule definitions are recognized by comparing each rule's
+target against a defined list of known suffixes.  When 'make' sees a
+rule whose target is a known suffix, this rule is considered a
+single-suffix rule.  When 'make' sees a rule whose target is two known
+suffixes concatenated, this rule is taken as a double-suffix rule.
+
+   For example, '.c' and '.o' are both on the default list of known
+suffixes.  Therefore, if you define a rule whose target is '.c.o',
+'make' takes it to be a double-suffix rule with source suffix '.c' and
+target suffix '.o'.  Here is the old-fashioned way to define the rule
+for compiling a C source file:
+
+     .c.o:
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<
+
+   Suffix rules cannot have any prerequisites of their own.  If they
+have any, they are treated as normal files with funny names, not as
+suffix rules.  Thus, the rule:
+
+     .c.o: foo.h
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<
+
+tells how to make the file '.c.o' from the prerequisite file 'foo.h',
+and is not at all like the pattern rule:
+
+     %.o: %.c foo.h
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<
+
+which tells how to make '.o' files from '.c' files, and makes all '.o'
+files using this pattern rule also depend on 'foo.h'.
+
+   Suffix rules with no recipe are also meaningless.  They do not remove
+previous rules as do pattern rules with no recipe (*note Canceling
+Implicit Rules: Canceling Rules.).  They simply enter the suffix or pair
+of suffixes concatenated as a target in the data base.
+
+   The known suffixes are simply the names of the prerequisites of the
+special target '.SUFFIXES'.  You can add your own suffixes by writing a
+rule for '.SUFFIXES' that adds more prerequisites, as in:
+
+     .SUFFIXES: .hack .win
+
+which adds '.hack' and '.win' to the end of the list of suffixes.
+
+   If you wish to eliminate the default known suffixes instead of just
+adding to them, write a rule for '.SUFFIXES' with no prerequisites.  By
+special dispensation, this eliminates all existing prerequisites of
+'.SUFFIXES'.  You can then write another rule to add the suffixes you
+want.  For example,
+
+     .SUFFIXES:            # Delete the default suffixes
+     .SUFFIXES: .c .o .h   # Define our suffix list
+
+   The '-r' or '--no-builtin-rules' flag causes the default list of
+suffixes to be empty.
+
+   The variable 'SUFFIXES' is defined to the default list of suffixes
+before 'make' reads any makefiles.  You can change the list of suffixes
+with a rule for the special target '.SUFFIXES', but that does not alter
+this variable.
+
+
+File: make.info,  Node: Implicit Rule Search,  Prev: Suffix Rules,  Up: Implicit Rules
+
+10.8 Implicit Rule Search Algorithm
+===================================
+
+Here is the procedure 'make' uses for searching for an implicit rule for
+a target T.  This procedure is followed for each double-colon rule with
+no recipe, for each target of ordinary rules none of which have a
+recipe, and for each prerequisite that is not the target of any rule.
+It is also followed recursively for prerequisites that come from
+implicit rules, in the search for a chain of rules.
+
+   Suffix rules are not mentioned in this algorithm because suffix rules
+are converted to equivalent pattern rules once the makefiles have been
+read in.
+
+   For an archive member target of the form 'ARCHIVE(MEMBER)', the
+following algorithm is run twice, first using the entire target name T,
+and second using '(MEMBER)' as the target T if the first run found no
+rule.
+
+  1. Split T into a directory part, called D, and the rest, called N.
+     For example, if T is 'src/foo.o', then D is 'src/' and N is
+     'foo.o'.
+
+  2. Make a list of all the pattern rules one of whose targets matches T
+     or N.  If the target pattern contains a slash, it is matched
+     against T; otherwise, against N.
+
+  3. If any rule in that list is _not_ a match-anything rule, then
+     remove all non-terminal match-anything rules from the list.
+
+  4. Remove from the list all rules with no recipe.
+
+  5. For each pattern rule in the list:
+
+       a. Find the stem S, which is the nonempty part of T or N matched
+          by the '%' in the target pattern.
+
+       b. Compute the prerequisite names by substituting S for '%'; if
+          the target pattern does not contain a slash, append D to the
+          front of each prerequisite name.
+
+       c. Test whether all the prerequisites exist or ought to exist.
+          (If a file name is mentioned in the makefile as a target or as
+          an explicit prerequisite, then we say it ought to exist.)
+
+          If all prerequisites exist or ought to exist, or there are no
+          prerequisites, then this rule applies.
+
+  6. If no pattern rule has been found so far, try harder.  For each
+     pattern rule in the list:
+
+       a. If the rule is terminal, ignore it and go on to the next rule.
+
+       b. Compute the prerequisite names as before.
+
+       c. Test whether all the prerequisites exist or ought to exist.
+
+       d. For each prerequisite that does not exist, follow this
+          algorithm recursively to see if the prerequisite can be made
+          by an implicit rule.
+
+       e. If all prerequisites exist, ought to exist, or can be made by
+          implicit rules, then this rule applies.
+
+  7. If no implicit rule applies, the rule for '.DEFAULT', if any,
+     applies.  In that case, give T the same recipe that '.DEFAULT' has.
+     Otherwise, there is no recipe for T.
+
+   Once a rule that applies has been found, for each target pattern of
+the rule other than the one that matched T or N, the '%' in the pattern
+is replaced with S and the resultant file name is stored until the
+recipe to remake the target file T is executed.  After the recipe is
+executed, each of these stored file names are entered into the data base
+and marked as having been updated and having the same update status as
+the file T.
+
+   When the recipe of a pattern rule is executed for T, the automatic
+variables are set corresponding to the target and prerequisites.  *Note
+Automatic Variables::.
+
+
+File: make.info,  Node: Archives,  Next: Extending make,  Prev: Implicit Rules,  Up: Top
+
+11 Using 'make' to Update Archive Files
+***************************************
+
+"Archive files" are files containing named sub-files called "members";
+they are maintained with the program 'ar' and their main use is as
+subroutine libraries for linking.
+
+* Menu:
+
+* Archive Members::             Archive members as targets.
+* Archive Update::              The implicit rule for archive member targets.
+* Archive Pitfalls::            Dangers to watch out for when using archives.
+* Archive Suffix Rules::        You can write a special kind of suffix rule
+                                  for updating archives.
+
+
+File: make.info,  Node: Archive Members,  Next: Archive Update,  Prev: Archives,  Up: Archives
+
+11.1 Archive Members as Targets
+===============================
+
+An individual member of an archive file can be used as a target or
+prerequisite in 'make'.  You specify the member named MEMBER in archive
+file ARCHIVE as follows:
+
+     ARCHIVE(MEMBER)
+
+This construct is available only in targets and prerequisites, not in
+recipes!  Most programs that you might use in recipes do not support
+this syntax and cannot act directly on archive members.  Only 'ar' and
+other programs specifically designed to operate on archives can do so.
+Therefore, valid recipes to update an archive member target probably
+must use 'ar'.  For example, this rule says to create a member 'hack.o'
+in archive 'foolib' by copying the file 'hack.o':
+
+     foolib(hack.o) : hack.o
+             ar cr foolib hack.o
+
+   In fact, nearly all archive member targets are updated in just this
+way and there is an implicit rule to do it for you.  *Please note:* The
+'c' flag to 'ar' is required if the archive file does not already exist.
+
+   To specify several members in the same archive, you can write all the
+member names together between the parentheses.  For example:
+
+     foolib(hack.o kludge.o)
+
+is equivalent to:
+
+     foolib(hack.o) foolib(kludge.o)
+
+   You can also use shell-style wildcards in an archive member
+reference.  *Note Using Wildcard Characters in File Names: Wildcards.
+For example, 'foolib(*.o)' expands to all existing members of the
+'foolib' archive whose names end in '.o'; perhaps 'foolib(hack.o)
+foolib(kludge.o)'.
+
+
+File: make.info,  Node: Archive Update,  Next: Archive Pitfalls,  Prev: Archive Members,  Up: Archives
+
+11.2 Implicit Rule for Archive Member Targets
+=============================================
+
+Recall that a target that looks like 'A(M)' stands for the member named
+M in the archive file A.
+
+   When 'make' looks for an implicit rule for such a target, as a
+special feature it considers implicit rules that match '(M)', as well as
+those that match the actual target 'A(M)'.
+
+   This causes one special rule whose target is '(%)' to match.  This
+rule updates the target 'A(M)' by copying the file M into the archive.
+For example, it will update the archive member target 'foo.a(bar.o)' by
+copying the _file_ 'bar.o' into the archive 'foo.a' as a _member_ named
+'bar.o'.
+
+   When this rule is chained with others, the result is very powerful.
+Thus, 'make "foo.a(bar.o)"' (the quotes are needed to protect the '('
+and ')' from being interpreted specially by the shell) in the presence
+of a file 'bar.c' is enough to cause the following recipe to be run,
+even without a makefile:
+
+     cc -c bar.c -o bar.o
+     ar r foo.a bar.o
+     rm -f bar.o
+
+Here 'make' has envisioned the file 'bar.o' as an intermediate file.
+*Note Chains of Implicit Rules: Chained Rules.
+
+   Implicit rules such as this one are written using the automatic
+variable '$%'.  *Note Automatic Variables::.
+
+   An archive member name in an archive cannot contain a directory name,
+but it may be useful in a makefile to pretend that it does.  If you
+write an archive member target 'foo.a(dir/file.o)', 'make' will perform
+automatic updating with this recipe:
+
+     ar r foo.a dir/file.o
+
+which has the effect of copying the file 'dir/file.o' into a member
+named 'file.o'.  In connection with such usage, the automatic variables
+'%D' and '%F' may be useful.
+
+* Menu:
+
+* Archive Symbols::             How to update archive symbol directories.
+
+
+File: make.info,  Node: Archive Symbols,  Prev: Archive Update,  Up: Archive Update
+
+11.2.1 Updating Archive Symbol Directories
+------------------------------------------
+
+An archive file that is used as a library usually contains a special
+member named '__.SYMDEF' that contains a directory of the external
+symbol names defined by all the other members.  After you update any
+other members, you need to update '__.SYMDEF' so that it will summarize
+the other members properly.  This is done by running the 'ranlib'
+program:
+
+     ranlib ARCHIVEFILE
+
+   Normally you would put this command in the rule for the archive file,
+and make all the members of the archive file prerequisites of that rule.
+For example,
+
+     libfoo.a: libfoo.a(x.o) libfoo.a(y.o) ...
+             ranlib libfoo.a
+
+The effect of this is to update archive members 'x.o', 'y.o', etc., and
+then update the symbol directory member '__.SYMDEF' by running 'ranlib'.
+The rules for updating the members are not shown here; most likely you
+can omit them and use the implicit rule which copies files into the
+archive, as described in the preceding section.
+
+   This is not necessary when using the GNU 'ar' program, which updates
+the '__.SYMDEF' member automatically.
+
+
+File: make.info,  Node: Archive Pitfalls,  Next: Archive Suffix Rules,  Prev: Archive Update,  Up: Archives
+
+11.3 Dangers When Using Archives
+================================
+
+It is important to be careful when using parallel execution (the '-j'
+switch; *note Parallel Execution: Parallel.) and archives.  If multiple
+'ar' commands run at the same time on the same archive file, they will
+not know about each other and can corrupt the file.
+
+   Possibly a future version of 'make' will provide a mechanism to
+circumvent this problem by serializing all recipes that operate on the
+same archive file.  But for the time being, you must either write your
+makefiles to avoid this problem in some other way, or not use '-j'.
+
+
+File: make.info,  Node: Archive Suffix Rules,  Prev: Archive Pitfalls,  Up: Archives
+
+11.4 Suffix Rules for Archive Files
+===================================
+
+You can write a special kind of suffix rule for dealing with archive
+files.  *Note Suffix Rules::, for a full explanation of suffix rules.
+Archive suffix rules are obsolete in GNU 'make', because pattern rules
+for archives are a more general mechanism (*note Archive Update::).  But
+they are retained for compatibility with other 'make's.
+
+   To write a suffix rule for archives, you simply write a suffix rule
+using the target suffix '.a' (the usual suffix for archive files).  For
+example, here is the old-fashioned suffix rule to update a library
+archive from C source files:
+
+     .c.a:
+             $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
+             $(AR) r $@ $*.o
+             $(RM) $*.o
+
+This works just as if you had written the pattern rule:
+
+     (%.o): %.c
+             $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
+             $(AR) r $@ $*.o
+             $(RM) $*.o
+
+   In fact, this is just what 'make' does when it sees a suffix rule
+with '.a' as the target suffix.  Any double-suffix rule '.X.a' is
+converted to a pattern rule with the target pattern '(%.o)' and a
+prerequisite pattern of '%.X'.
+
+   Since you might want to use '.a' as the suffix for some other kind of
+file, 'make' also converts archive suffix rules to pattern rules in the
+normal way (*note Suffix Rules::).  Thus a double-suffix rule '.X.a'
+produces two pattern rules: '(%.o): %.X' and '%.a: %.X'.
+
+
+File: make.info,  Node: Extending make,  Next: Features,  Prev: Archives,  Up: Top
+
+12 Extending GNU 'make'
+***********************
+
+GNU 'make' provides many advanced capabilities, including many useful
+functions.  However, it does not contain a complete programming language
+and so it has limitations.  Sometimes these limitations can be overcome
+through use of the 'shell' function to invoke a separate program,
+although this can be inefficient.
+
+   In cases where the built-in capabilities of GNU 'make' are
+insufficient to your requirements there are two options for extending
+'make'.  On systems where it's provided, you can utilize GNU Guile as an
+embedded scripting language (*note GNU Guile Integration: Guile
+Integration.).  On systems which support dynamically loadable objects,
+you can write your own extension in any language (which can be compiled
+into such an object) and load it to provide extended capabilities (*note
+The 'load' Directive: load Directive.).
+
+* Menu:
+
+* Guile Integration::           Using Guile as an embedded scripting language.
+* Loading Objects::             Loading dynamic objects as extensions.
+
+
+File: make.info,  Node: Guile Integration,  Next: Loading Objects,  Prev: Extending make,  Up: Extending make
+
+12.1 GNU Guile Integration
+==========================
+
+GNU 'make' may be built with support for GNU Guile as an embedded
+extension language.  Guile implements the Scheme language.  A review of
+GNU Guile and the Scheme language and its features is beyond the scope
+of this manual: see the documentation for GNU Guile and Scheme.
+
+   You can determine if 'make' contains support for Guile by examining
+the '.FEATURES' variable; it will contain the word GUILE if Guile
+support is available.
+
+   The Guile integration provides one new 'make' function: 'guile'.  The
+'guile' function takes one argument which is first expanded by 'make' in
+the normal fashion, then passed to the GNU Guile evaluator.  The result
+of the evaluator is converted into a string and used as the expansion of
+the 'guile' function in the makefile.
+
+   In addition, GNU 'make' exposes Guile procedures for use in Guile
+scripts.
+
+* Menu:
+
+* Guile Types::                 Converting Guile types to 'make' strings.
+* Guile Interface::             Invoking 'make' functions from Guile.
+* Guile Example::               Example using Guile in 'make'.
+
+
+File: make.info,  Node: Guile Types,  Next: Guile Interface,  Prev: Guile Integration,  Up: Guile Integration
+
+12.1.1 Conversion of Guile Types
+--------------------------------
+
+There is only one "data type" in 'make': a string.  GNU Guile, on the
+other hand, provides a rich variety of different data types.  An
+important aspect of the interface between 'make' and GNU Guile is the
+conversion of Guile data types into 'make' strings.
+
+   This conversion is relevant in two places: when a makefile invokes
+the 'guile' function to evaluate a Guile expression, the result of that
+evaluation must be converted into a make string so it can be further
+evaluated by 'make'.  And secondly, when a Guile script invokes one of
+the procedures exported by 'make' the argument provided to the procedure
+must be converted into a string.
+
+   The conversion of Guile types into 'make' strings is as below:
+
+'#f'
+     False is converted into the empty string: in 'make' conditionals
+     the empty string is considered false.
+
+'#t'
+     True is converted to the string '#t': in 'make' conditionals any
+     non-empty string is considered true.
+
+'symbol'
+'number'
+     A symbol or number is converted into the string representation of
+     that symbol or number.
+
+'character'
+     A printable character is converted to the same character.
+
+'string'
+     A string containing only printable characters is converted to the
+     same string.
+
+'list'
+     A list is converted recursively according to the above rules.  This
+     implies that any structured list will be flattened (that is, a
+     result of ''(a b (c d) e)' will be converted to the 'make' string
+     'a b c d e').
+
+'other'
+     Any other Guile type results in an error.  In future versions of
+     'make', other Guile types may be converted.
+
+   The translation of '#f' (to the empty string) and '#t' (to the
+non-empty string '#t') is designed to allow you to use Guile boolean
+results directly as 'make' boolean conditions.  For example:
+
+     $(if $(guile (access? "myfile" R_OK)),$(info myfile exists))
+
+   As a consequence of these conversion rules you must consider the
+result of your Guile script, as that result will be converted into a
+string and parsed by 'make'.  If there is no natural result for the
+script (that is, the script exists solely for its side-effects), you
+should add '#f' as the final expression in order to avoid syntax errors
+in your makefile.
+
+
+File: make.info,  Node: Guile Interface,  Next: Guile Example,  Prev: Guile Types,  Up: Guile Integration
+
+12.1.2 Interfaces from Guile to 'make'
+--------------------------------------
+
+In addition to the 'guile' function available in makefiles, 'make'
+exposes some procedures for use in your Guile scripts.  At startup
+'make' creates a new Guile module, 'gnu make', and exports these
+procedures as public interfaces from that module:
+
+'gmk-expand'
+     This procedure takes a single argument which is converted into a
+     string.  The string is expanded by 'make' using normal 'make'
+     expansion rules.  The result of the expansion is converted into a
+     Guile string and provided as the result of the procedure.
+
+'gmk-eval'
+     This procedure takes a single argument which is converted into a
+     string.  The string is evaluated by 'make' as if it were a
+     makefile.  This is the same capability available via the 'eval'
+     function (*note Eval Function::).  The result of the 'gmk-eval'
+     procedure is always the empty string.
+
+     Note that 'gmk-eval' is not quite the same as using 'gmk-expand'
+     with the 'eval' function: in the latter case the evaluated string
+     will be expanded _twice_; first by 'gmk-expand', then again by the
+     'eval' function.
+
+
+File: make.info,  Node: Guile Example,  Prev: Guile Interface,  Up: Guile Integration
+
+12.1.3 Example Using Guile in 'make'
+------------------------------------
+
+Here is a very simple example using GNU Guile to manage writing to a
+file.  These Guile procedures simply open a file, allow writing to the
+file (one string per line), and close the file.  Note that because we
+cannot store complex values such as Guile ports in 'make' variables,
+we'll keep the port as a global variable in the Guile interpreter.
+
+   You can create Guile functions easily using 'define'/'endef' to
+create a Guile script, then use the 'guile' function to internalize it:
+
+     define GUILEIO
+     ;; A simple Guile IO library for GNU make
+
+     (define MKPORT #f)
+
+     (define (mkopen name mode)
+       (set! MKPORT (open-file name mode))
+       #f)
+
+     (define (mkwrite s)
+       (display s MKPORT)
+       (newline MKPORT)
+       #f)
+
+     (define (mkclose)
+       (close-port MKPORT)
+       #f)
+
+     #f
+     endef
+
+     # Internalize the Guile IO functions
+     $(guile $(GUILEIO))
+
+   If you have a significant amount of Guile support code, you might
+consider keeping it in a different file (e.g., 'guileio.scm') and then
+loading it in your makefile using the 'guile' function:
+
+     $(guile (load "guileio.scm"))
+
+   An advantage to this method is that when editing 'guileio.scm', your
+editor will understand that this file contains Scheme syntax rather than
+makefile syntax.
+
+   Now you can use these Guile functions to create files.  Suppose you
+need to operate on a very large list, which cannot fit on the command
+line, but the utility you're using accepts the list as input as well:
+
+     prog: $(PREREQS)
+             @$(guile (mkopen "tmp.out" "w")) \
+              $(foreach X,$^,$(guile (mkwrite "$(X)"))) \
+              $(guile (mkclose))
+             $(LINK) < tmp.out
+
+   A more comprehensive suite of file manipulation procedures is
+possible of course.  You could, for example, maintain multiple output
+files at the same time by choosing a symbol for each one and using it as
+the key to a hash table, where the value is a port, then returning the
+symbol to be stored in a 'make' variable.
+
+
+File: make.info,  Node: Loading Objects,  Prev: Guile Integration,  Up: Extending make
+
+12.2 Loading Dynamic Objects
+============================
+
+     Warning: The 'load' directive and extension capability is
+     considered a "technology preview" in this release of GNU make.  We
+     encourage you to experiment with this feature and we appreciate any
+     feedback on it.  However we cannot guarantee to maintain
+     backward-compatibility in the next release.  Consider using GNU
+     Guile instead for extending GNU make (*note The 'guile' Function:
+     Guile Function.).
+
+   Many operating systems provide a facility for dynamically loading
+compiled objects.  If your system provides this facility, GNU 'make' can
+make use of it to load dynamic objects at runtime, providing new
+capabilities which may then be invoked by your makefile.
+
+   The 'load' directive is used to load a dynamic object.  Once the
+object is loaded, a "setup" function will be invoked to allow the object
+to initialize itself and register new facilities with GNU 'make'.  A
+dynamic object might include new 'make' functions, for example, and the
+"setup" function would register them with GNU 'make''s function handling
+system.
+
+* Menu:
+
+* load Directive::              Loading dynamic objects as extensions.
+* Remaking Loaded Objects::     How loaded objects get remade.
+* Loaded Object API::           Programmatic interface for loaded objects.
+* Loaded Object Example::       Example of a loaded object
+
+
+File: make.info,  Node: load Directive,  Next: Remaking Loaded Objects,  Prev: Loading Objects,  Up: Loading Objects
+
+12.2.1 The 'load' Directive
+---------------------------
+
+Objects are loaded into GNU 'make' by placing the 'load' directive into
+your makefile.  The syntax of the 'load' directive is as follows:
+
+     load OBJECT-FILE ...
+
+   or:
+
+     load OBJECT-FILE(SYMBOL-NAME) ...
+
+   The file OBJECT-FILE is dynamically loaded by GNU 'make'.  If
+OBJECT-FILE does not include a directory path then it is first looked
+for in the current directory.  If it is not found there, or a directory
+path is included, then system-specific paths will be searched.  If the
+load fails for any reason, 'make' will print a message and exit.
+
+   If the load succeeds 'make' will invoke an initializing function.
+
+   If SYMBOL-NAME is provided, it will be used as the name of the
+initializing function.
+
+   If no SYMBOL-NAME is provided, the initializing function name is
+created by taking the base file name of OBJECT-FILE, up to the first
+character which is not a valid symbol name character (alphanumerics and
+underscores are valid symbol name characters).  To this prefix will be
+appended the suffix '_gmk_setup'.
+
+   More than one object file may be loaded with a single 'load'
+directive, and both forms of 'load' arguments may be used in the same
+directive.
+
+   The initializing function will be provided the file name and line
+number of the invocation of the 'load' operation.  It should return a
+value of type 'int', which must be '0' on failure and non-'0' on
+success.  If the return value is '-1', then GNU make will _not_ attempt
+to rebuild the object file (*note How Loaded Objects Are Remade:
+Remaking Loaded Objects.).
+
+   For example:
+
+     load ../mk_funcs.so
+
+   will load the dynamic object '../mk_funcs.so'.  After the object is
+loaded, 'make' will invoke the function (assumed to be defined by the
+shared object) 'mk_funcs_gmk_setup'.
+
+   On the other hand:
+
+     load ../mk_funcs.so(init_mk_func)
+
+   will load the dynamic object '../mk_funcs.so'.  After the object is
+loaded, 'make' will invoke the function 'init_mk_func'.
+
+   Regardless of how many times an object file appears in a 'load'
+directive, it will only be loaded (and its setup function will only be
+invoked) once.
+
+   After an object has been successfully loaded, its file name is
+appended to the '.LOADED' variable.
+
+   If you would prefer that failure to load a dynamic object not be
+reported as an error, you can use the '-load' directive instead of
+'load'.  GNU 'make' will not fail and no message will be generated if an
+object fails to load.  The failed object is not added to the '.LOADED'
+variable, which can then be consulted to determine if the load was
+successful.
+
+
+File: make.info,  Node: Remaking Loaded Objects,  Next: Loaded Object API,  Prev: load Directive,  Up: Loading Objects
+
+12.2.2 How Loaded Objects Are Remade
+------------------------------------
+
+Loaded objects undergo the same re-make procedure as makefiles (*note
+How Makefiles Are Remade: Remaking Makefiles.).  If any loaded object is
+recreated, then 'make' will start from scratch and re-read all the
+makefiles, and reload the object files again.  It is not necessary for
+the loaded object to do anything special to support this.
+
+   It's up to the makefile author to provide the rules needed for
+rebuilding the loaded object.
+
+
+File: make.info,  Node: Loaded Object API,  Next: Loaded Object Example,  Prev: Remaking Loaded Objects,  Up: Loading Objects
+
+12.2.3 Loaded Object Interface
+------------------------------
+
+     Warning: For this feature to be useful your extensions will need to
+     invoke various functions internal to GNU 'make'.  The programming
+     interfaces provided in this release should not be considered
+     stable: functions may be added, removed, or change calling
+     signatures or implementations in future versions of GNU 'make'.
+
+   To be useful, loaded objects must be able to interact with GNU
+'make'.  This interaction includes both interfaces the loaded object
+provides to makefiles and also interfaces 'make' provides to the loaded
+object to manipulate 'make''s operation.
+
+   The interface between loaded objects and 'make' is defined by the
+'gnumake.h' C header file.  All loaded objects written in C should
+include this header file.  Any loaded object not written in C will need
+to implement the interface defined in this header file.
+
+   Typically, a loaded object will register one or more new GNU 'make'
+functions using the 'gmk_add_function' routine from within its setup
+function.  The implementations of these 'make' functions may make use of
+the 'gmk_expand' and 'gmk_eval' routines to perform their tasks, then
+optionally return a string as the result of the function expansion.
+
+Loaded Object Licensing
+.......................
+
+Every dynamic extension should define the global symbol
+'plugin_is_GPL_compatible' to assert that it has been licensed under a
+GPL-compatible license.  If this symbol does not exist, 'make' emits a
+fatal error and exits when it tries to load your extension.
+
+   The declared type of the symbol should be 'int'.  It does not need to
+be in any allocated section, though.  The code merely asserts that the
+symbol exists in the global scope.  Something like this is enough:
+
+     int plugin_is_GPL_compatible;
+
+Data Structures
+...............
+
+'gmk_floc'
+     This structure represents a filename/location pair.  It is provided
+     when defining items, so GNU 'make' can inform the user later where
+     the definition occurred if necessary.
+
+Registering Functions
+.....................
+
+There is currently one way for makefiles to invoke operations provided
+by the loaded object: through the 'make' function call interface.  A
+loaded object can register one or more new functions which may then be
+invoked from within the makefile in the same way as any other function.
+
+   Use 'gmk_add_function' to create a new 'make' function.  Its
+arguments are as follows:
+
+'name'
+     The function name.  This is what the makefile should use to invoke
+     the function.  The name must be between 1 and 255 characters long
+     and it may only contain alphanumeric, period ('.'), dash ('-'), and
+     underscore ('_') characters.  It may not begin with a period.
+
+'func_ptr'
+     A pointer to a function that 'make' will invoke when it expands the
+     function in a makefile.  This function must be defined by the
+     loaded object.
+
+'min_args'
+     The minimum number of arguments the function will accept.  Must be
+     between 0 and 255.  GNU 'make' will check this and fail before
+     invoking 'func_ptr' if the function was invoked with too few
+     arguments.
+
+'max_args'
+     The maximum number of arguments the function will accept.  Must be
+     between 0 and 255.  GNU 'make' will check this and fail before
+     invoking 'func_ptr' if the function was invoked with too few
+     arguments.  If the value is 0, then any number of arguments is
+     accepted.  If the value is greater than 0, then it must be greater
+     than or equal to 'min_args'.
+
+'flags'
+     Flags that specify how this function will operate; the desired
+     flags should be OR'd together.  If the 'GMK_FUNC_NOEXPAND' flag is
+     given then the function arguments will not be expanded before the
+     function is called; otherwise they will be expanded first.
+
+Registered Function Interface
+.............................
+
+A function registered with 'make' must match the 'gmk_func_ptr' type.
+It will be invoked with three parameters: 'name' (the name of the
+function), 'argc' (the number of arguments to the function), and 'argv'
+(an array of pointers to arguments to the function).  The last pointer
+(that is, 'argv[argc]') will be null ('0').
+
+   The return value of the function is the result of expanding the
+function.  If the function expands to nothing the return value may be
+null.  Otherwise, it must be a pointer to a string created with
+'gmk_alloc'.  Once the function returns, 'make' owns this string and
+will free it when appropriate; it cannot be accessed by the loaded
+object.
+
+GNU 'make' Facilities
+.....................
+
+There are some facilities exported by GNU 'make' for use by loaded
+objects.  Typically these would be run from within the setup function
+and/or the functions registered via 'gmk_add_function', to retrieve or
+modify the data 'make' works with.
+
+'gmk_expand'
+     This function takes a string and expands it using 'make' expansion
+     rules.  The result of the expansion is returned in a nil-terminated
+     string buffer.  The caller is responsible for calling 'gmk_free'
+     with a pointer to the returned buffer when done.
+
+'gmk_eval'
+     This function takes a buffer and evaluates it as a segment of
+     makefile syntax.  This function can be used to define new
+     variables, new rules, etc.  It is equivalent to using the 'eval'
+     'make' function.
+
+   Note that there is a difference between 'gmk_eval' and calling
+'gmk_expand' with a string using the 'eval' function: in the latter case
+the string will be expanded _twice_; once by 'gmk_expand' and then again
+by the 'eval' function.  Using 'gmk_eval' the buffer is only expanded
+once, at most (as it's read by the 'make' parser).
+
+Memory Management
+.................
+
+Some systems allow for different memory management schemes.  Thus you
+should never pass memory that you've allocated directly to any 'make'
+function, nor should you attempt to directly free any memory returned to
+you by any 'make' function.  Instead, use the 'gmk_alloc' and 'gmk_free'
+functions.
+
+   In particular, the string returned to 'make' by a function registered
+using 'gmk_add_function' _must_ be allocated using 'gmk_alloc', and the
+string returned from the 'make' 'gmk_expand' function _must_ be freed
+(when no longer needed) using 'gmk_free'.
+
+'gmk_alloc'
+     Return a pointer to a newly-allocated buffer.  This function will
+     always return a valid pointer; if not enough memory is available
+     'make' will exit.
+
+'gmk_free'
+     Free a buffer returned to you by 'make'.  Once the 'gmk_free'
+     function returns the string will no longer be valid.
+
+
+File: make.info,  Node: Loaded Object Example,  Prev: Loaded Object API,  Up: Loading Objects
+
+12.2.4 Example Loaded Object
+----------------------------
+
+Let's suppose we wanted to write a new GNU 'make' function that would
+create a temporary file and return its name.  We would like our function
+to take a prefix as an argument.  First we can write the function in a
+file 'mk_temp.c':
+
+     #include <stdlib.h>
+     #include <stdlib.h>
+     #include <stdio.h>
+     #include <string.h>
+     #include <unistd.h>
+     #include <errno.h>
+
+     #include <gnumake.h>
+
+     int plugin_is_GPL_compatible;
+
+     char *
+     gen_tmpfile(const char *nm, int argc, char **argv)
+     {
+       int fd;
+
+       /* Compute the size of the filename and allocate space for it.  */
+       int len = strlen (argv[0]) + 6 + 1;
+       char *buf = gmk_alloc (len);
+
+       strcpy (buf, argv[0]);
+       strcat (buf, "XXXXXX");
+
+       fd = mkstemp(buf);
+       if (fd >= 0)
+         {
+           /* Don't leak the file descriptor.  */
+           close (fd);
+           return buf;
+         }
+
+       /* Failure.  */
+       fprintf (stderr, "mkstemp(%s) failed: %s\n", buf, strerror (errno));
+       gmk_free (buf);
+       return NULL;
+     }
+
+     int
+     mk_temp_gmk_setup ()
+     {
+       /* Register the function with make name "mk-temp".  */
+       gmk_add_function ("mk-temp", gen_tmpfile, 1, 1, 1);
+       return 1;
+     }
+
+   Next, we will write a makefile that can build this shared object,
+load it, and use it:
+
+     all:
+             @echo Temporary file: $(mk-temp tmpfile.)
+
+     load mk_temp.so
+
+     mk_temp.so: mk_temp.c
+             $(CC) -shared -fPIC -o $ $<
+
+   On MS-Windows, due to peculiarities of how shared objects are
+produced, the compiler needs to scan the "import library" produced when
+building 'make', typically called 'libgnumake-VERSION.dll.a', where
+VERSION is the version of the load object API. So the recipe to produce
+a shared object will look on Windows like this (assuming the API version
+is 1):
+
+     mk_temp.dll: mk_temp.c
+             $(CC) -shared -o $ $< -lgnumake-1
+
+   Now when you run 'make' you'll see something like:
+
+     $ make
+     cc -shared -fPIC -o mk_temp.so mk_temp.c
+     Temporary filename: tmpfile.A7JEwd
+
+
+File: make.info,  Node: Features,  Next: Missing,  Prev: Extending make,  Up: Top
+
+13 Features of GNU 'make'
+*************************
+
+Here is a summary of the features of GNU 'make', for comparison with and
+credit to other versions of 'make'.  We consider the features of 'make'
+in 4.2 BSD systems as a baseline.  If you are concerned with writing
+portable makefiles, you should not use the features of 'make' listed
+here, nor the ones in *note Missing::.
+
+   Many features come from the version of 'make' in System V.
+
+   * The 'VPATH' variable and its special meaning.  *Note Searching
+     Directories for Prerequisites: Directory Search.  This feature
+     exists in System V 'make', but is undocumented.  It is documented
+     in 4.3 BSD 'make' (which says it mimics System V's 'VPATH'
+     feature).
+
+   * Included makefiles.  *Note Including Other Makefiles: Include.
+     Allowing multiple files to be included with a single directive is a
+     GNU extension.
+
+   * Variables are read from and communicated via the environment.
+     *Note Variables from the Environment: Environment.
+
+   * Options passed through the variable 'MAKEFLAGS' to recursive
+     invocations of 'make'.  *Note Communicating Options to a
+     Sub-'make': Options/Recursion.
+
+   * The automatic variable '$%' is set to the member name in an archive
+     reference.  *Note Automatic Variables::.
+
+   * The automatic variables '$@', '$*', '$<', '$%', and '$?' have
+     corresponding forms like '$(@F)' and '$(@D)'.  We have generalized
+     this to '$^' as an obvious extension.  *Note Automatic Variables::.
+
+   * Substitution variable references.  *Note Basics of Variable
+     References: Reference.
+
+   * The command line options '-b' and '-m', accepted and ignored.  In
+     System V 'make', these options actually do something.
+
+   * Execution of recursive commands to run 'make' via the variable
+     'MAKE' even if '-n', '-q' or '-t' is specified.  *Note Recursive
+     Use of 'make': Recursion.
+
+   * Support for suffix '.a' in suffix rules.  *Note Archive Suffix
+     Rules::.  This feature is obsolete in GNU 'make', because the
+     general feature of rule chaining (*note Chains of Implicit Rules:
+     Chained Rules.) allows one pattern rule for installing members in
+     an archive (*note Archive Update::) to be sufficient.
+
+   * The arrangement of lines and backslash/newline combinations in
+     recipes is retained when the recipes are printed, so they appear as
+     they do in the makefile, except for the stripping of initial
+     whitespace.
+
+   The following features were inspired by various other versions of
+'make'.  In some cases it is unclear exactly which versions inspired
+which others.
+
+   * Pattern rules using '%'.  This has been implemented in several
+     versions of 'make'.  We're not sure who invented it first, but it's
+     been spread around a bit.  *Note Defining and Redefining Pattern
+     Rules: Pattern Rules.
+
+   * Rule chaining and implicit intermediate files.  This was
+     implemented by Stu Feldman in his version of 'make' for AT&T Eighth
+     Edition Research Unix, and later by Andrew Hume of AT&T Bell Labs
+     in his 'mk' program (where he terms it "transitive closure").  We
+     do not really know if we got this from either of them or thought it
+     up ourselves at the same time.  *Note Chains of Implicit Rules:
+     Chained Rules.
+
+   * The automatic variable '$^' containing a list of all prerequisites
+     of the current target.  We did not invent this, but we have no idea
+     who did.  *Note Automatic Variables::.  The automatic variable '$+'
+     is a simple extension of '$^'.
+
+   * The "what if" flag ('-W' in GNU 'make') was (as far as we know)
+     invented by Andrew Hume in 'mk'.  *Note Instead of Executing
+     Recipes: Instead of Execution.
+
+   * The concept of doing several things at once (parallelism) exists in
+     many incarnations of 'make' and similar programs, though not in the
+     System V or BSD implementations.  *Note Recipe Execution:
+     Execution.
+
+   * A number of different build tools that support parallelism also
+     support collecting output and displaying as a single block.  *Note
+     Output During Parallel Execution: Parallel Output.
+
+   * Modified variable references using pattern substitution come from
+     SunOS 4.  *Note Basics of Variable References: Reference.  This
+     functionality was provided in GNU 'make' by the 'patsubst' function
+     before the alternate syntax was implemented for compatibility with
+     SunOS 4.  It is not altogether clear who inspired whom, since GNU
+     'make' had 'patsubst' before SunOS 4 was released.
+
+   * The special significance of '+' characters preceding recipe lines
+     (*note Instead of Executing Recipes: Instead of Execution.) is
+     mandated by 'IEEE Standard 1003.2-1992' (POSIX.2).
+
+   * The '+=' syntax to append to the value of a variable comes from
+     SunOS 4 'make'.  *Note Appending More Text to Variables: Appending.
+
+   * The syntax 'ARCHIVE(MEM1 MEM2...)' to list multiple members in a
+     single archive file comes from SunOS 4 'make'.  *Note Archive
+     Members::.
+
+   * The '-include' directive to include makefiles with no error for a
+     nonexistent file comes from SunOS 4 'make'.  (But note that SunOS 4
+     'make' does not allow multiple makefiles to be specified in one
+     '-include' directive.)  The same feature appears with the name
+     'sinclude' in SGI 'make' and perhaps others.
+
+   * The '!=' shell assignment operator exists in many BSD of 'make' and
+     is purposefully implemented here to behave identically to those
+     implementations.
+
+   * Various build management tools are implemented using scripting
+     languages such as Perl or Python and thus provide a natural
+     embedded scripting language, similar to GNU 'make''s integration of
+     GNU Guile.
+
+   The remaining features are inventions new in GNU 'make':
+
+   * Use the '-v' or '--version' option to print version and copyright
+     information.
+
+   * Use the '-h' or '--help' option to summarize the options to 'make'.
+
+   * Simply-expanded variables.  *Note The Two Flavors of Variables:
+     Flavors.
+
+   * Pass command line variable assignments automatically through the
+     variable 'MAKE' to recursive 'make' invocations.  *Note Recursive
+     Use of 'make': Recursion.
+
+   * Use the '-C' or '--directory' command option to change directory.
+     *Note Summary of Options: Options Summary.
+
+   * Make verbatim variable definitions with 'define'.  *Note Defining
+     Multi-Line Variables: Multi-Line.
+
+   * Declare phony targets with the special target '.PHONY'.
+
+     Andrew Hume of AT&T Bell Labs implemented a similar feature with a
+     different syntax in his 'mk' program.  This seems to be a case of
+     parallel discovery.  *Note Phony Targets: Phony Targets.
+
+   * Manipulate text by calling functions.  *Note Functions for
+     Transforming Text: Functions.
+
+   * Use the '-o' or '--old-file' option to pretend a file's
+     modification-time is old.  *Note Avoiding Recompilation of Some
+     Files: Avoiding Compilation.
+
+   * Conditional execution.
+
+     This feature has been implemented numerous times in various
+     versions of 'make'; it seems a natural extension derived from the
+     features of the C preprocessor and similar macro languages and is
+     not a revolutionary concept.  *Note Conditional Parts of Makefiles:
+     Conditionals.
+
+   * Specify a search path for included makefiles.  *Note Including
+     Other Makefiles: Include.
+
+   * Specify extra makefiles to read with an environment variable.
+     *Note The Variable 'MAKEFILES': MAKEFILES Variable.
+
+   * Strip leading sequences of './' from file names, so that './FILE'
+     and 'FILE' are considered to be the same file.
+
+   * Use a special search method for library prerequisites written in
+     the form '-lNAME'.  *Note Directory Search for Link Libraries:
+     Libraries/Search.
+
+   * Allow suffixes for suffix rules (*note Old-Fashioned Suffix Rules:
+     Suffix Rules.) to contain any characters.  In other versions of
+     'make', they must begin with '.' and not contain any '/'
+     characters.
+
+   * Keep track of the current level of 'make' recursion using the
+     variable 'MAKELEVEL'.  *Note Recursive Use of 'make': Recursion.
+
+   * Provide any goals given on the command line in the variable
+     'MAKECMDGOALS'.  *Note Arguments to Specify the Goals: Goals.
+
+   * Specify static pattern rules.  *Note Static Pattern Rules: Static
+     Pattern.
+
+   * Provide selective 'vpath' search.  *Note Searching Directories for
+     Prerequisites: Directory Search.
+
+   * Provide computed variable references.  *Note Basics of Variable
+     References: Reference.
+
+   * Update makefiles.  *Note How Makefiles Are Remade: Remaking
+     Makefiles.  System V 'make' has a very, very limited form of this
+     functionality in that it will check out SCCS files for makefiles.
+
+   * Various new built-in implicit rules.  *Note Catalogue of Built-In
+     Rules: Catalogue of Rules.
+
+   * Load dynamic objects which can modify the behavior of 'make'.
+     *Note Loading Dynamic Objects: Loading Objects.
+
+
+File: make.info,  Node: Missing,  Next: Makefile Conventions,  Prev: Features,  Up: Top
+
+14 Incompatibilities and Missing Features
+*****************************************
+
+The 'make' programs in various other systems support a few features that
+are not implemented in GNU 'make'.  The POSIX.2 standard ('IEEE Standard
+1003.2-1992') which specifies 'make' does not require any of these
+features.
+
+   * A target of the form 'FILE((ENTRY))' stands for a member of archive
+     file FILE.  The member is chosen, not by name, but by being an
+     object file which defines the linker symbol ENTRY.
+
+     This feature was not put into GNU 'make' because of the
+     non-modularity of putting knowledge into 'make' of the internal
+     format of archive file symbol tables.  *Note Updating Archive
+     Symbol Directories: Archive Symbols.
+
+   * Suffixes (used in suffix rules) that end with the character '~'
+     have a special meaning to System V 'make'; they refer to the SCCS
+     file that corresponds to the file one would get without the '~'.
+     For example, the suffix rule '.c~.o' would make the file 'N.o' from
+     the SCCS file 's.N.c'.  For complete coverage, a whole series of
+     such suffix rules is required.  *Note Old-Fashioned Suffix Rules:
+     Suffix Rules.
+
+     In GNU 'make', this entire series of cases is handled by two
+     pattern rules for extraction from SCCS, in combination with the
+     general feature of rule chaining.  *Note Chains of Implicit Rules:
+     Chained Rules.
+
+   * In System V and 4.3 BSD 'make', files found by 'VPATH' search
+     (*note Searching Directories for Prerequisites: Directory Search.)
+     have their names changed inside recipes.  We feel it is much
+     cleaner to always use automatic variables and thus make this
+     feature obsolete.
+
+   * In some Unix 'make's, the automatic variable '$*' appearing in the
+     prerequisites of a rule has the amazingly strange "feature" of
+     expanding to the full name of the _target of that rule_.  We cannot
+     imagine what went on in the minds of Unix 'make' developers to do
+     this; it is utterly inconsistent with the normal definition of
+     '$*'.
+
+   * In some Unix 'make's, implicit rule search (*note Using Implicit
+     Rules: Implicit Rules.) is apparently done for _all_ targets, not
+     just those without recipes.  This means you can do:
+
+          foo.o:
+                  cc -c foo.c
+
+     and Unix 'make' will intuit that 'foo.o' depends on 'foo.c'.
+
+     We feel that such usage is broken.  The prerequisite properties of
+     'make' are well-defined (for GNU 'make', at least), and doing such
+     a thing simply does not fit the model.
+
+   * GNU 'make' does not include any built-in implicit rules for
+     compiling or preprocessing EFL programs.  If we hear of anyone who
+     is using EFL, we will gladly add them.
+
+   * It appears that in SVR4 'make', a suffix rule can be specified with
+     no recipe, and it is treated as if it had an empty recipe (*note
+     Empty Recipes::).  For example:
+
+          .c.a:
+
+     will override the built-in '.c.a' suffix rule.
+
+     We feel that it is cleaner for a rule without a recipe to always
+     simply add to the prerequisite list for the target.  The above
+     example can be easily rewritten to get the desired behavior in GNU
+     'make':
+
+          .c.a: ;
+
+   * Some versions of 'make' invoke the shell with the '-e' flag, except
+     under '-k' (*note Testing the Compilation of a Program: Testing.).
+     The '-e' flag tells the shell to exit as soon as any program it
+     runs returns a nonzero status.  We feel it is cleaner to write each
+     line of the recipe to stand on its own and not require this special
+     treatment.
+
+
+File: make.info,  Node: Makefile Conventions,  Next: Quick Reference,  Prev: Missing,  Up: Top
+
+15 Makefile Conventions
+***********************
+
+This node describes conventions for writing the Makefiles for GNU
+programs.  Using Automake will help you write a Makefile that follows
+these conventions.  For more information on portable Makefiles, see
+POSIX and *note Portable Make Programming: (autoconf)Portable Make.
+
+* Menu:
+
+* Makefile Basics::             General conventions for Makefiles.
+* Utilities in Makefiles::      Utilities to be used in Makefiles.
+* Command Variables::           Variables for specifying commands.
+* DESTDIR::                     Supporting staged installs.
+* Directory Variables::         Variables for installation directories.
+* Standard Targets::            Standard targets for users.
+* Install Command Categories::  Three categories of commands in the 'install'
+                                  rule: normal, pre-install and post-install.
+
+
+File: make.info,  Node: Makefile Basics,  Next: Utilities in Makefiles,  Up: Makefile Conventions
+
+15.1 General Conventions for Makefiles
+======================================
+
+Every Makefile should contain this line:
+
+     SHELL = /bin/sh
+
+to avoid trouble on systems where the 'SHELL' variable might be
+inherited from the environment.  (This is never a problem with GNU
+'make'.)
+
+   Different 'make' programs have incompatible suffix lists and implicit
+rules, and this sometimes creates confusion or misbehavior.  So it is a
+good idea to set the suffix list explicitly using only the suffixes you
+need in the particular Makefile, like this:
+
+     .SUFFIXES:
+     .SUFFIXES: .c .o
+
+The first line clears out the suffix list, the second introduces all
+suffixes which may be subject to implicit rules in this Makefile.
+
+   Don't assume that '.' is in the path for command execution.  When you
+need to run programs that are a part of your package during the make,
+please make sure that it uses './' if the program is built as part of
+the make or '$(srcdir)/' if the file is an unchanging part of the source
+code.  Without one of these prefixes, the current search path is used.
+
+   The distinction between './' (the "build directory") and '$(srcdir)/'
+(the "source directory") is important because users can build in a
+separate directory using the '--srcdir' option to 'configure'.  A rule
+of the form:
+
+     foo.1 : foo.man sedscript
+             sed -f sedscript foo.man > foo.1
+
+will fail when the build directory is not the source directory, because
+'foo.man' and 'sedscript' are in the source directory.
+
+   When using GNU 'make', relying on 'VPATH' to find the source file
+will work in the case where there is a single dependency file, since the
+'make' automatic variable '$<' will represent the source file wherever
+it is.  (Many versions of 'make' set '$<' only in implicit rules.)  A
+Makefile target like
+
+     foo.o : bar.c
+             $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
+
+should instead be written as
+
+     foo.o : bar.c
+             $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@
+
+in order to allow 'VPATH' to work correctly.  When the target has
+multiple dependencies, using an explicit '$(srcdir)' is the easiest way
+to make the rule work well.  For example, the target above for 'foo.1'
+is best written as:
+
+     foo.1 : foo.man sedscript
+             sed -f $(srcdir)/sedscript $(srcdir)/foo.man > $@
+
+   GNU distributions usually contain some files which are not source
+files--for example, Info files, and the output from Autoconf, Automake,
+Bison or Flex.  Since these files normally appear in the source
+directory, they should always appear in the source directory, not in the
+build directory.  So Makefile rules to update them should put the
+updated files in the source directory.
+
+   However, if a file does not appear in the distribution, then the
+Makefile should not put it in the source directory, because building a
+program in ordinary circumstances should not modify the source directory
+in any way.
+
+   Try to make the build and installation targets, at least (and all
+their subtargets) work correctly with a parallel 'make'.
+
+
+File: make.info,  Node: Utilities in Makefiles,  Next: Command Variables,  Prev: Makefile Basics,  Up: Makefile Conventions
+
+15.2 Utilities in Makefiles
+===========================
+
+Write the Makefile commands (and any shell scripts, such as 'configure')
+to run under 'sh' (both the traditional Bourne shell and the POSIX
+shell), not 'csh'.  Don't use any special features of 'ksh' or 'bash',
+or POSIX features not widely supported in traditional Bourne 'sh'.
+
+   The 'configure' script and the Makefile rules for building and
+installation should not use any utilities directly except these:
+
+     awk cat cmp cp diff echo egrep expr false grep install-info ln ls
+     mkdir mv printf pwd rm rmdir sed sleep sort tar test touch tr true
+
+   Compression programs such as 'gzip' can be used in the 'dist' rule.
+
+   Generally, stick to the widely-supported (usually POSIX-specified)
+options and features of these programs.  For example, don't use 'mkdir
+-p', convenient as it may be, because a few systems don't support it at
+all and with others, it is not safe for parallel execution.  For a list
+of known incompatibilities, see *note Portable Shell Programming:
+(autoconf)Portable Shell.
+
+   It is a good idea to avoid creating symbolic links in makefiles,
+since a few file systems don't support them.
+
+   The Makefile rules for building and installation can also use
+compilers and related programs, but should do so via 'make' variables so
+that the user can substitute alternatives.  Here are some of the
+programs we mean:
+
+     ar bison cc flex install ld ldconfig lex
+     make makeinfo ranlib texi2dvi yacc
+
+   Use the following 'make' variables to run those programs:
+
+     $(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
+     $(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
+
+   When you use 'ranlib' or 'ldconfig', you should make sure nothing bad
+happens if the system does not have the program in question.  Arrange to
+ignore an error from that command, and print a message before the
+command to tell the user that failure of this command does not mean a
+problem.  (The Autoconf 'AC_PROG_RANLIB' macro can help with this.)
+
+   If you use symbolic links, you should implement a fallback for
+systems that don't have symbolic links.
+
+   Additional utilities that can be used via Make variables are:
+
+     chgrp chmod chown mknod
+
+   It is ok to use other utilities in Makefile portions (or scripts)
+intended only for particular systems where you know those utilities
+exist.
+
+
+File: make.info,  Node: Command Variables,  Next: DESTDIR,  Prev: Utilities in Makefiles,  Up: Makefile Conventions
+
+15.3 Variables for Specifying Commands
+======================================
+
+Makefiles should provide variables for overriding certain commands,
+options, and so on.
+
+   In particular, you should run most utility programs via variables.
+Thus, if you use Bison, have a variable named 'BISON' whose default
+value is set with 'BISON = bison', and refer to it with '$(BISON)'
+whenever you need to use Bison.
+
+   File management utilities such as 'ln', 'rm', 'mv', and so on, need
+not be referred to through variables in this way, since users don't need
+to replace them with other programs.
+
+   Each program-name variable should come with an options variable that
+is used to supply options to the program.  Append 'FLAGS' to the
+program-name variable name to get the options variable name--for
+example, 'BISONFLAGS'.  (The names 'CFLAGS' for the C compiler, 'YFLAGS'
+for yacc, and 'LFLAGS' for lex, are exceptions to this rule, but we keep
+them because they are standard.)  Use 'CPPFLAGS' in any compilation
+command that runs the preprocessor, and use 'LDFLAGS' in any compilation
+command that does linking as well as in any direct use of 'ld'.
+
+   If there are C compiler options that _must_ be used for proper
+compilation of certain files, do not include them in 'CFLAGS'.  Users
+expect to be able to specify 'CFLAGS' freely themselves.  Instead,
+arrange to pass the necessary options to the C compiler independently of
+'CFLAGS', by writing them explicitly in the compilation commands or by
+defining an implicit rule, like this:
+
+     CFLAGS = -g
+     ALL_CFLAGS = -I. $(CFLAGS)
+     .c.o:
+             $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
+
+   Do include the '-g' option in 'CFLAGS', because that is not
+_required_ for proper compilation.  You can consider it a default that
+is only recommended.  If the package is set up so that it is compiled
+with GCC by default, then you might as well include '-O' in the default
+value of 'CFLAGS' as well.
+
+   Put 'CFLAGS' last in the compilation command, after other variables
+containing compiler options, so the user can use 'CFLAGS' to override
+the others.
+
+   'CFLAGS' should be used in every invocation of the C compiler, both
+those which do compilation and those which do linking.
+
+   Every Makefile should define the variable 'INSTALL', which is the
+basic command for installing a file into the system.
+
+   Every Makefile should also define the variables 'INSTALL_PROGRAM' and
+'INSTALL_DATA'.  (The default for 'INSTALL_PROGRAM' should be
+'$(INSTALL)'; the default for 'INSTALL_DATA' should be '${INSTALL} -m
+644'.)  Then it should use those variables as the commands for actual
+installation, for executables and non-executables respectively.  Minimal
+use of these variables is as follows:
+
+     $(INSTALL_PROGRAM) foo $(bindir)/foo
+     $(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
+
+   However, it is preferable to support a 'DESTDIR' prefix on the target
+files, as explained in the next section.
+
+   It is acceptable, but not required, to install multiple files in one
+command, with the final argument being a directory, as in:
+
+     $(INSTALL_PROGRAM) foo bar baz $(bindir)
+
+
+File: make.info,  Node: DESTDIR,  Next: Directory Variables,  Prev: Command Variables,  Up: Makefile Conventions
+
+15.4 'DESTDIR': Support for Staged Installs
+===========================================
+
+'DESTDIR' is a variable prepended to each installed target file, like
+this:
+
+     $(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
+     $(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
+
+   The 'DESTDIR' variable is specified by the user on the 'make' command
+line as an absolute file name.  For example:
+
+     make DESTDIR=/tmp/stage install
+
+'DESTDIR' should be supported only in the 'install*' and 'uninstall*'
+targets, as those are the only targets where it is useful.
+
+   If your installation step would normally install '/usr/local/bin/foo'
+and '/usr/local/lib/libfoo.a', then an installation invoked as in the
+example above would install '/tmp/stage/usr/local/bin/foo' and
+'/tmp/stage/usr/local/lib/libfoo.a' instead.
+
+   Prepending the variable 'DESTDIR' to each target in this way provides
+for "staged installs", where the installed files are not placed directly
+into their expected location but are instead copied into a temporary
+location ('DESTDIR').  However, installed files maintain their relative
+directory structure and any embedded file names will not be modified.
+
+   You should not set the value of 'DESTDIR' in your 'Makefile' at all;
+then the files are installed into their expected locations by default.
+Also, specifying 'DESTDIR' should not change the operation of the
+software in any way, so its value should not be included in any file
+contents.
+
+   'DESTDIR' support is commonly used in package creation.  It is also
+helpful to users who want to understand what a given package will
+install where, and to allow users who don't normally have permissions to
+install into protected areas to build and install before gaining those
+permissions.  Finally, it can be useful with tools such as 'stow', where
+code is installed in one place but made to appear to be installed
+somewhere else using symbolic links or special mount operations.  So, we
+strongly recommend GNU packages support 'DESTDIR', though it is not an
+absolute requirement.
+
+
+File: make.info,  Node: Directory Variables,  Next: Standard Targets,  Prev: DESTDIR,  Up: Makefile Conventions
+
+15.5 Variables for Installation Directories
+===========================================
+
+Installation directories should always be named by variables, so it is
+easy to install in a nonstandard place.  The standard names for these
+variables and the values they should have in GNU packages are described
+below.  They are based on a standard file system layout; variants of it
+are used in GNU/Linux and other modern operating systems.
+
+   Installers are expected to override these values when calling 'make'
+(e.g., 'make prefix=/usr install' or 'configure' (e.g., 'configure
+--prefix=/usr').  GNU packages should not try to guess which value
+should be appropriate for these variables on the system they are being
+installed onto: use the default settings specified here so that all GNU
+packages behave identically, allowing the installer to achieve any
+desired layout.
+
+   All installation directories, and their parent directories, should be
+created (if necessary) before they are installed into.
+
+   These first two variables set the root for the installation.  All the
+other installation directories should be subdirectories of one of these
+two, and nothing should be directly installed into these two
+directories.
+
+'prefix'
+     A prefix used in constructing the default values of the variables
+     listed below.  The default value of 'prefix' should be
+     '/usr/local'.  When building the complete GNU system, the prefix
+     will be empty and '/usr' will be a symbolic link to '/'.  (If you
+     are using Autoconf, write it as '@prefix@'.)
+
+     Running 'make install' with a different value of 'prefix' from the
+     one used to build the program should _not_ recompile the program.
+
+'exec_prefix'
+     A prefix used in constructing the default values of some of the
+     variables listed below.  The default value of 'exec_prefix' should
+     be '$(prefix)'.  (If you are using Autoconf, write it as
+     '@exec_prefix@'.)
+
+     Generally, '$(exec_prefix)' is used for directories that contain
+     machine-specific files (such as executables and subroutine
+     libraries), while '$(prefix)' is used directly for other
+     directories.
+
+     Running 'make install' with a different value of 'exec_prefix' from
+     the one used to build the program should _not_ recompile the
+     program.
+
+   Executable programs are installed in one of the following
+directories.
+
+'bindir'
+     The directory for installing executable programs that users can
+     run.  This should normally be '/usr/local/bin', but write it as
+     '$(exec_prefix)/bin'.  (If you are using Autoconf, write it as
+     '@bindir@'.)
+
+'sbindir'
+     The directory for installing executable programs that can be run
+     from the shell, but are only generally useful to system
+     administrators.  This should normally be '/usr/local/sbin', but
+     write it as '$(exec_prefix)/sbin'.  (If you are using Autoconf,
+     write it as '@sbindir@'.)
+
+'libexecdir'
+     The directory for installing executable programs to be run by other
+     programs rather than by users.  This directory should normally be
+     '/usr/local/libexec', but write it as '$(exec_prefix)/libexec'.
+     (If you are using Autoconf, write it as '@libexecdir@'.)
+
+     The definition of 'libexecdir' is the same for all packages, so you
+     should install your data in a subdirectory thereof.  Most packages
+     install their data under '$(libexecdir)/PACKAGE-NAME/', possibly
+     within additional subdirectories thereof, such as
+     '$(libexecdir)/PACKAGE-NAME/MACHINE/VERSION'.
+
+   Data files used by the program during its execution are divided into
+categories in two ways.
+
+   * Some files are normally modified by programs; others are never
+     normally modified (though users may edit some of these).
+
+   * Some files are architecture-independent and can be shared by all
+     machines at a site; some are architecture-dependent and can be
+     shared only by machines of the same kind and operating system;
+     others may never be shared between two machines.
+
+   This makes for six different possibilities.  However, we want to
+discourage the use of architecture-dependent files, aside from object
+files and libraries.  It is much cleaner to make other data files
+architecture-independent, and it is generally not hard.
+
+   Here are the variables Makefiles should use to specify directories to
+put these various kinds of files in:
+
+'datarootdir'
+     The root of the directory tree for read-only
+     architecture-independent data files.  This should normally be
+     '/usr/local/share', but write it as '$(prefix)/share'.  (If you are
+     using Autoconf, write it as '@datarootdir@'.)  'datadir''s default
+     value is based on this variable; so are 'infodir', 'mandir', and
+     others.
+
+'datadir'
+     The directory for installing idiosyncratic read-only
+     architecture-independent data files for this program.  This is
+     usually the same place as 'datarootdir', but we use the two
+     separate variables so that you can move these program-specific
+     files without altering the location for Info files, man pages, etc.
+
+     This should normally be '/usr/local/share', but write it as
+     '$(datarootdir)'.  (If you are using Autoconf, write it as
+     '@datadir@'.)
+
+     The definition of 'datadir' is the same for all packages, so you
+     should install your data in a subdirectory thereof.  Most packages
+     install their data under '$(datadir)/PACKAGE-NAME/'.
+
+'sysconfdir'
+     The directory for installing read-only data files that pertain to a
+     single machine-that is to say, files for configuring a host.
+     Mailer and network configuration files, '/etc/passwd', and so forth
+     belong here.  All the files in this directory should be ordinary
+     ASCII text files.  This directory should normally be
+     '/usr/local/etc', but write it as '$(prefix)/etc'.  (If you are
+     using Autoconf, write it as '@sysconfdir@'.)
+
+     Do not install executables here in this directory (they probably
+     belong in '$(libexecdir)' or '$(sbindir)').  Also do not install
+     files that are modified in the normal course of their use (programs
+     whose purpose is to change the configuration of the system
+     excluded).  Those probably belong in '$(localstatedir)'.
+
+'sharedstatedir'
+     The directory for installing architecture-independent data files
+     which the programs modify while they run.  This should normally be
+     '/usr/local/com', but write it as '$(prefix)/com'.  (If you are
+     using Autoconf, write it as '@sharedstatedir@'.)
+
+'localstatedir'
+     The directory for installing data files which the programs modify
+     while they run, and that pertain to one specific machine.  Users
+     should never need to modify files in this directory to configure
+     the package's operation; put such configuration information in
+     separate files that go in '$(datadir)' or '$(sysconfdir)'.
+     '$(localstatedir)' should normally be '/usr/local/var', but write
+     it as '$(prefix)/var'.  (If you are using Autoconf, write it as
+     '@localstatedir@'.)
+
+'runstatedir'
+     The directory for installing data files which the programs modify
+     while they run, that pertain to one specific machine, and which
+     need not persist longer than the execution of the program--which is
+     generally long-lived, for example, until the next reboot.  PID
+     files for system daemons are a typical use.  In addition, this
+     directory should not be cleaned except perhaps at reboot, while the
+     general '/tmp' ('TMPDIR') may be cleaned arbitrarily.  This should
+     normally be '/var/run', but write it as '$(localstatedir)/run'.
+     Having it as a separate variable allows the use of '/run' if
+     desired, for example.  (If you are using Autoconf 2.70 or later,
+     write it as '@runstatedir@'.)
+
+   These variables specify the directory for installing certain specific
+types of files, if your program has them.  Every GNU package should have
+Info files, so every program needs 'infodir', but not all need 'libdir'
+or 'lispdir'.
+
+'includedir'
+     The directory for installing header files to be included by user
+     programs with the C '#include' preprocessor directive.  This should
+     normally be '/usr/local/include', but write it as
+     '$(prefix)/include'.  (If you are using Autoconf, write it as
+     '@includedir@'.)
+
+     Most compilers other than GCC do not look for header files in
+     directory '/usr/local/include'.  So installing the header files
+     this way is only useful with GCC. Sometimes this is not a problem
+     because some libraries are only really intended to work with GCC.
+     But some libraries are intended to work with other compilers.  They
+     should install their header files in two places, one specified by
+     'includedir' and one specified by 'oldincludedir'.
+
+'oldincludedir'
+     The directory for installing '#include' header files for use with
+     compilers other than GCC. This should normally be '/usr/include'.
+     (If you are using Autoconf, you can write it as '@oldincludedir@'.)
+
+     The Makefile commands should check whether the value of
+     'oldincludedir' is empty.  If it is, they should not try to use it;
+     they should cancel the second installation of the header files.
+
+     A package should not replace an existing header in this directory
+     unless the header came from the same package.  Thus, if your Foo
+     package provides a header file 'foo.h', then it should install the
+     header file in the 'oldincludedir' directory if either (1) there is
+     no 'foo.h' there or (2) the 'foo.h' that exists came from the Foo
+     package.
+
+     To tell whether 'foo.h' came from the Foo package, put a magic
+     string in the file--part of a comment--and 'grep' for that string.
+
+'docdir'
+     The directory for installing documentation files (other than Info)
+     for this package.  By default, it should be
+     '/usr/local/share/doc/YOURPKG', but it should be written as
+     '$(datarootdir)/doc/YOURPKG'.  (If you are using Autoconf, write it
+     as '@docdir@'.)  The YOURPKG subdirectory, which may include a
+     version number, prevents collisions among files with common names,
+     such as 'README'.
+
+'infodir'
+     The directory for installing the Info files for this package.  By
+     default, it should be '/usr/local/share/info', but it should be
+     written as '$(datarootdir)/info'.  (If you are using Autoconf,
+     write it as '@infodir@'.)  'infodir' is separate from 'docdir' for
+     compatibility with existing practice.
+
+'htmldir'
+'dvidir'
+'pdfdir'
+'psdir'
+     Directories for installing documentation files in the particular
+     format.  They should all be set to '$(docdir)' by default.  (If you
+     are using Autoconf, write them as '@htmldir@', '@dvidir@', etc.)
+     Packages which supply several translations of their documentation
+     should install them in '$(htmldir)/'LL, '$(pdfdir)/'LL, etc.  where
+     LL is a locale abbreviation such as 'en' or 'pt_BR'.
+
+'libdir'
+     The directory for object files and libraries of object code.  Do
+     not install executables here, they probably ought to go in
+     '$(libexecdir)' instead.  The value of 'libdir' should normally be
+     '/usr/local/lib', but write it as '$(exec_prefix)/lib'.  (If you
+     are using Autoconf, write it as '@libdir@'.)
+
+'lispdir'
+     The directory for installing any Emacs Lisp files in this package.
+     By default, it should be '/usr/local/share/emacs/site-lisp', but it
+     should be written as '$(datarootdir)/emacs/site-lisp'.
+
+     If you are using Autoconf, write the default as '@lispdir@'.  In
+     order to make '@lispdir@' work, you need the following lines in
+     your 'configure.ac' file:
+
+          lispdir='${datarootdir}/emacs/site-lisp'
+          AC_SUBST(lispdir)
+
+'localedir'
+     The directory for installing locale-specific message catalogs for
+     this package.  By default, it should be '/usr/local/share/locale',
+     but it should be written as '$(datarootdir)/locale'.  (If you are
+     using Autoconf, write it as '@localedir@'.)  This directory usually
+     has a subdirectory per locale.
+
+   Unix-style man pages are installed in one of the following:
+
+'mandir'
+     The top-level directory for installing the man pages (if any) for
+     this package.  It will normally be '/usr/local/share/man', but you
+     should write it as '$(datarootdir)/man'.  (If you are using
+     Autoconf, write it as '@mandir@'.)
+
+'man1dir'
+     The directory for installing section 1 man pages.  Write it as
+     '$(mandir)/man1'.
+'man2dir'
+     The directory for installing section 2 man pages.  Write it as
+     '$(mandir)/man2'
+'...'
+
+     *Don't make the primary documentation for any GNU software be a man
+     page.  Write a manual in Texinfo instead.  Man pages are just for
+     the sake of people running GNU software on Unix, which is a
+     secondary application only.*
+
+'manext'
+     The file name extension for the installed man page.  This should
+     contain a period followed by the appropriate digit; it should
+     normally be '.1'.
+
+'man1ext'
+     The file name extension for installed section 1 man pages.
+'man2ext'
+     The file name extension for installed section 2 man pages.
+'...'
+     Use these names instead of 'manext' if the package needs to install
+     man pages in more than one section of the manual.
+
+   And finally, you should set the following variable:
+
+'srcdir'
+     The directory for the sources being compiled.  The value of this
+     variable is normally inserted by the 'configure' shell script.  (If
+     you are using Autoconf, use 'srcdir = @srcdir@'.)
+
+   For example:
+
+     # Common prefix for installation directories.
+     # NOTE: This directory must exist when you start the install.
+     prefix = /usr/local
+     datarootdir = $(prefix)/share
+     datadir = $(datarootdir)
+     exec_prefix = $(prefix)
+     # Where to put the executable for the command `gcc'.
+     bindir = $(exec_prefix)/bin
+     # Where to put the directories used by the compiler.
+     libexecdir = $(exec_prefix)/libexec
+     # Where to put the Info files.
+     infodir = $(datarootdir)/info
+
+   If your program installs a large number of files into one of the
+standard user-specified directories, it might be useful to group them
+into a subdirectory particular to that program.  If you do this, you
+should write the 'install' rule to create these subdirectories.
+
+   Do not expect the user to include the subdirectory name in the value
+of any of the variables listed above.  The idea of having a uniform set
+of variable names for installation directories is to enable the user to
+specify the exact same values for several different GNU packages.  In
+order for this to be useful, all the packages must be designed so that
+they will work sensibly when the user does so.
+
+   At times, not all of these variables may be implemented in the
+current release of Autoconf and/or Automake; but as of Autoconf 2.60, we
+believe all of them are.  When any are missing, the descriptions here
+serve as specifications for what Autoconf will implement.  As a
+programmer, you can either use a development version of Autoconf or
+avoid using these variables until a stable release is made which
+supports them.
+
+
+File: make.info,  Node: Standard Targets,  Next: Install Command Categories,  Prev: Directory Variables,  Up: Makefile Conventions
+
+15.6 Standard Targets for Users
+===============================
+
+All GNU programs should have the following targets in their Makefiles:
+
+'all'
+     Compile the entire program.  This should be the default target.
+     This target need not rebuild any documentation files; Info files
+     should normally be included in the distribution, and DVI (and other
+     documentation format) files should be made only when explicitly
+     asked for.
+
+     By default, the Make rules should compile and link with '-g', so
+     that executable programs have debugging symbols.  Otherwise, you
+     are essentially helpless in the face of a crash, and it is often
+     far from easy to reproduce with a fresh build.
+
+'install'
+     Compile the program and copy the executables, libraries, and so on
+     to the file names where they should reside for actual use.  If
+     there is a simple test to verify that a program is properly
+     installed, this target should run that test.
+
+     Do not strip executables when installing them.  This helps eventual
+     debugging that may be needed later, and nowadays disk space is
+     cheap and dynamic loaders typically ensure debug sections are not
+     loaded during normal execution.  Users that need stripped binaries
+     may invoke the 'install-strip' target to do that.
+
+     If possible, write the 'install' target rule so that it does not
+     modify anything in the directory where the program was built,
+     provided 'make all' has just been done.  This is convenient for
+     building the program under one user name and installing it under
+     another.
+
+     The commands should create all the directories in which files are
+     to be installed, if they don't already exist.  This includes the
+     directories specified as the values of the variables 'prefix' and
+     'exec_prefix', as well as all subdirectories that are needed.  One
+     way to do this is by means of an 'installdirs' target as described
+     below.
+
+     Use '-' before any command for installing a man page, so that
+     'make' will ignore any errors.  This is in case there are systems
+     that don't have the Unix man page documentation system installed.
+
+     The way to install Info files is to copy them into '$(infodir)'
+     with '$(INSTALL_DATA)' (*note Command Variables::), and then run
+     the 'install-info' program if it is present.  'install-info' is a
+     program that edits the Info 'dir' file to add or update the menu
+     entry for the given Info file; it is part of the Texinfo package.
+
+     Here is a sample rule to install an Info file that also tries to
+     handle some additional situations, such as 'install-info' not being
+     present.
+
+          do-install-info: foo.info installdirs
+                  $(NORMAL_INSTALL)
+          # Prefer an info file in . to one in srcdir.
+                  if test -f foo.info; then d=.; \
+                   else d="$(srcdir)"; fi; \
+                  $(INSTALL_DATA) $$d/foo.info \
+                    "$(DESTDIR)$(infodir)/foo.info"
+          # Run install-info only if it exists.
+          # Use `if' instead of just prepending `-' to the
+          # line so we notice real errors from install-info.
+          # Use `$(SHELL) -c' because some shells do not
+          # fail gracefully when there is an unknown command.
+                  $(POST_INSTALL)
+                  if $(SHELL) -c 'install-info --version' \
+                     >/dev/null 2>&1; then \
+                    install-info --dir-file="$(DESTDIR)$(infodir)/dir" \
+                                 "$(DESTDIR)$(infodir)/foo.info"; \
+                  else true; fi
+
+     When writing the 'install' target, you must classify all the
+     commands into three categories: normal ones, "pre-installation"
+     commands and "post-installation" commands.  *Note Install Command
+     Categories::.
+
+'install-html'
+'install-dvi'
+'install-pdf'
+'install-ps'
+     These targets install documentation in formats other than Info;
+     they're intended to be called explicitly by the person installing
+     the package, if that format is desired.  GNU prefers Info files, so
+     these must be installed by the 'install' target.
+
+     When you have many documentation files to install, we recommend
+     that you avoid collisions and clutter by arranging for these
+     targets to install in subdirectories of the appropriate
+     installation directory, such as 'htmldir'.  As one example, if your
+     package has multiple manuals, and you wish to install HTML
+     documentation with many files (such as the "split" mode output by
+     'makeinfo --html'), you'll certainly want to use subdirectories, or
+     two nodes with the same name in different manuals will overwrite
+     each other.
+
+     Please make these 'install-FORMAT' targets invoke the commands for
+     the FORMAT target, for example, by making FORMAT a dependency.
+
+'uninstall'
+     Delete all the installed files--the copies that the 'install' and
+     'install-*' targets create.
+
+     This rule should not modify the directories where compilation is
+     done, only the directories where files are installed.
+
+     The uninstallation commands are divided into three categories, just
+     like the installation commands.  *Note Install Command
+     Categories::.
+
+'install-strip'
+     Like 'install', but strip the executable files while installing
+     them.  In simple cases, this target can use the 'install' target in
+     a simple way:
+
+          install-strip:
+                  $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+                          install
+
+     But if the package installs scripts as well as real executables,
+     the 'install-strip' target can't just refer to the 'install'
+     target; it has to strip the executables but not the scripts.
+
+     'install-strip' should not strip the executables in the build
+     directory which are being copied for installation.  It should only
+     strip the copies that are installed.
+
+     Normally we do not recommend stripping an executable unless you are
+     sure the program has no bugs.  However, it can be reasonable to
+     install a stripped executable for actual execution while saving the
+     unstripped executable elsewhere in case there is a bug.
+
+'clean'
+     Delete all files in the current directory that are normally created
+     by building the program.  Also delete files in other directories if
+     they are created by this makefile.  However, don't delete the files
+     that record the configuration.  Also preserve files that could be
+     made by building, but normally aren't because the distribution
+     comes with them.  There is no need to delete parent directories
+     that were created with 'mkdir -p', since they could have existed
+     anyway.
+
+     Delete '.dvi' files here if they are not part of the distribution.
+
+'distclean'
+     Delete all files in the current directory (or created by this
+     makefile) that are created by configuring or building the program.
+     If you have unpacked the source and built the program without
+     creating any other files, 'make distclean' should leave only the
+     files that were in the distribution.  However, there is no need to
+     delete parent directories that were created with 'mkdir -p', since
+     they could have existed anyway.
+
+'mostlyclean'
+     Like 'clean', but may refrain from deleting a few files that people
+     normally don't want to recompile.  For example, the 'mostlyclean'
+     target for GCC does not delete 'libgcc.a', because recompiling it
+     is rarely necessary and takes a lot of time.
+
+'maintainer-clean'
+     Delete almost everything that can be reconstructed with this
+     Makefile.  This typically includes everything deleted by
+     'distclean', plus more: C source files produced by Bison, tags
+     tables, Info files, and so on.
+
+     The reason we say "almost everything" is that running the command
+     'make maintainer-clean' should not delete 'configure' even if
+     'configure' can be remade using a rule in the Makefile.  More
+     generally, 'make maintainer-clean' should not delete anything that
+     needs to exist in order to run 'configure' and then begin to build
+     the program.  Also, there is no need to delete parent directories
+     that were created with 'mkdir -p', since they could have existed
+     anyway.  These are the only exceptions; 'maintainer-clean' should
+     delete everything else that can be rebuilt.
+
+     The 'maintainer-clean' target is intended to be used by a
+     maintainer of the package, not by ordinary users.  You may need
+     special tools to reconstruct some of the files that 'make
+     maintainer-clean' deletes.  Since these files are normally included
+     in the distribution, we don't take care to make them easy to
+     reconstruct.  If you find you need to unpack the full distribution
+     again, don't blame us.
+
+     To help make users aware of this, the commands for the special
+     'maintainer-clean' target should start with these two:
+
+          @echo 'This command is intended for maintainers to use; it'
+          @echo 'deletes files that may need special tools to rebuild.'
+
+'TAGS'
+     Update a tags table for this program.
+
+'info'
+     Generate any Info files needed.  The best way to write the rules is
+     as follows:
+
+          info: foo.info
+
+          foo.info: foo.texi chap1.texi chap2.texi
+                  $(MAKEINFO) $(srcdir)/foo.texi
+
+     You must define the variable 'MAKEINFO' in the Makefile.  It should
+     run the 'makeinfo' program, which is part of the Texinfo
+     distribution.
+
+     Normally a GNU distribution comes with Info files, and that means
+     the Info files are present in the source directory.  Therefore, the
+     Make rule for an info file should update it in the source
+     directory.  When users build the package, ordinarily Make will not
+     update the Info files because they will already be up to date.
+
+'dvi'
+'html'
+'pdf'
+'ps'
+     Generate documentation files in the given format.  These targets
+     should always exist, but any or all can be a no-op if the given
+     output format cannot be generated.  These targets should not be
+     dependencies of the 'all' target; the user must manually invoke
+     them.
+
+     Here's an example rule for generating DVI files from Texinfo:
+
+          dvi: foo.dvi
+
+          foo.dvi: foo.texi chap1.texi chap2.texi
+                  $(TEXI2DVI) $(srcdir)/foo.texi
+
+     You must define the variable 'TEXI2DVI' in the Makefile.  It should
+     run the program 'texi2dvi', which is part of the Texinfo
+     distribution.  ('texi2dvi' uses TeX to do the real work of
+     formatting.  TeX is not distributed with Texinfo.)  Alternatively,
+     write only the dependencies, and allow GNU 'make' to provide the
+     command.
+
+     Here's another example, this one for generating HTML from Texinfo:
+
+          html: foo.html
+
+          foo.html: foo.texi chap1.texi chap2.texi
+                  $(TEXI2HTML) $(srcdir)/foo.texi
+
+     Again, you would define the variable 'TEXI2HTML' in the Makefile;
+     for example, it might run 'makeinfo --no-split --html' ('makeinfo'
+     is part of the Texinfo distribution).
+
+'dist'
+     Create a distribution tar file for this program.  The tar file
+     should be set up so that the file names in the tar file start with
+     a subdirectory name which is the name of the package it is a
+     distribution for.  This name can include the version number.
+
+     For example, the distribution tar file of GCC version 1.40 unpacks
+     into a subdirectory named 'gcc-1.40'.
+
+     The easiest way to do this is to create a subdirectory
+     appropriately named, use 'ln' or 'cp' to install the proper files
+     in it, and then 'tar' that subdirectory.
+
+     Compress the tar file with 'gzip'.  For example, the actual
+     distribution file for GCC version 1.40 is called 'gcc-1.40.tar.gz'.
+     It is ok to support other free compression formats as well.
+
+     The 'dist' target should explicitly depend on all non-source files
+     that are in the distribution, to make sure they are up to date in
+     the distribution.  *Note Making Releases: (standards)Releases.
+
+'check'
+     Perform self-tests (if any).  The user must build the program
+     before running the tests, but need not install the program; you
+     should write the self-tests so that they work when the program is
+     built but not installed.
+
+   The following targets are suggested as conventional names, for
+programs in which they are useful.
+
+'installcheck'
+     Perform installation tests (if any).  The user must build and
+     install the program before running the tests.  You should not
+     assume that '$(bindir)' is in the search path.
+
+'installdirs'
+     It's useful to add a target named 'installdirs' to create the
+     directories where files are installed, and their parent
+     directories.  There is a script called 'mkinstalldirs' which is
+     convenient for this; you can find it in the Gnulib package.  You
+     can use a rule like this:
+
+          # Make sure all installation directories (e.g. $(bindir))
+          # actually exist by making them if necessary.
+          installdirs: mkinstalldirs
+                  $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
+                                          $(libdir) $(infodir) \
+                                          $(mandir)
+
+     or, if you wish to support 'DESTDIR' (strongly encouraged),
+
+          # Make sure all installation directories (e.g. $(bindir))
+          # actually exist by making them if necessary.
+          installdirs: mkinstalldirs
+                  $(srcdir)/mkinstalldirs \
+                      $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \
+                      $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \
+                      $(DESTDIR)$(mandir)
+
+     This rule should not modify the directories where compilation is
+     done.  It should do nothing but create installation directories.
+
+
+File: make.info,  Node: Install Command Categories,  Prev: Standard Targets,  Up: Makefile Conventions
+
+15.7 Install Command Categories
+===============================
+
+When writing the 'install' target, you must classify all the commands
+into three categories: normal ones, "pre-installation" commands and
+"post-installation" commands.
+
+   Normal commands move files into their proper places, and set their
+modes.  They may not alter any files except the ones that come entirely
+from the package they belong to.
+
+   Pre-installation and post-installation commands may alter other
+files; in particular, they can edit global configuration files or data
+bases.
+
+   Pre-installation commands are typically executed before the normal
+commands, and post-installation commands are typically run after the
+normal commands.
+
+   The most common use for a post-installation command is to run
+'install-info'.  This cannot be done with a normal command, since it
+alters a file (the Info directory) which does not come entirely and
+solely from the package being installed.  It is a post-installation
+command because it needs to be done after the normal command which
+installs the package's Info files.
+
+   Most programs don't need any pre-installation commands, but we have
+the feature just in case it is needed.
+
+   To classify the commands in the 'install' rule into these three
+categories, insert "category lines" among them.  A category line
+specifies the category for the commands that follow.
+
+   A category line consists of a tab and a reference to a special Make
+variable, plus an optional comment at the end.  There are three
+variables you can use, one for each category; the variable name
+specifies the category.  Category lines are no-ops in ordinary execution
+because these three Make variables are normally undefined (and you
+_should not_ define them in the makefile).
+
+   Here are the three possible category lines, each with a comment that
+explains what it means:
+
+             $(PRE_INSTALL)     # Pre-install commands follow.
+             $(POST_INSTALL)    # Post-install commands follow.
+             $(NORMAL_INSTALL)  # Normal commands follow.
+
+   If you don't use a category line at the beginning of the 'install'
+rule, all the commands are classified as normal until the first category
+line.  If you don't use any category lines, all the commands are
+classified as normal.
+
+   These are the category lines for 'uninstall':
+
+             $(PRE_UNINSTALL)     # Pre-uninstall commands follow.
+             $(POST_UNINSTALL)    # Post-uninstall commands follow.
+             $(NORMAL_UNINSTALL)  # Normal commands follow.
+
+   Typically, a pre-uninstall command would be used for deleting entries
+from the Info directory.
+
+   If the 'install' or 'uninstall' target has any dependencies which act
+as subroutines of installation, then you should start _each_
+dependency's commands with a category line, and start the main target's
+commands with a category line also.  This way, you can ensure that each
+command is placed in the right category regardless of which of the
+dependencies actually run.
+
+   Pre-installation and post-installation commands should not run any
+programs except for these:
+
+     [ basename bash cat chgrp chmod chown cmp cp dd diff echo
+     egrep expand expr false fgrep find getopt grep gunzip gzip
+     hostname install install-info kill ldconfig ln ls md5sum
+     mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
+     test touch true uname xargs yes
+
+   The reason for distinguishing the commands in this way is for the
+sake of making binary packages.  Typically a binary package contains all
+the executables and other files that need to be installed, and has its
+own method of installing them--so it does not need to run the normal
+installation commands.  But installing the binary package does need to
+execute the pre-installation and post-installation commands.
+
+   Programs to build binary packages work by extracting the
+pre-installation and post-installation commands.  Here is one way of
+extracting the pre-installation commands (the '-s' option to 'make' is
+needed to silence messages about entering subdirectories):
+
+     make -s -n install -o all \
+           PRE_INSTALL=pre-install \
+           POST_INSTALL=post-install \
+           NORMAL_INSTALL=normal-install \
+       | gawk -f pre-install.awk
+
+where the file 'pre-install.awk' could contain this:
+
+     $0 ~ /^(normal-install|post-install)[ \t]*$/ {on = 0}
+     on {print $0}
+     $0 ~ /^pre-install[ \t]*$/ {on = 1}
+
+
+File: make.info,  Node: Quick Reference,  Next: Error Messages,  Prev: Makefile Conventions,  Up: Top
+
+Appendix A Quick Reference
+**************************
+
+This appendix summarizes the directives, text manipulation functions,
+and special variables which GNU 'make' understands.  *Note Special
+Targets::, *note Catalogue of Built-In Rules: Catalogue of Rules, and
+*note Summary of Options: Options Summary, for other summaries.
+
+   Here is a summary of the directives GNU 'make' recognizes:
+
+'define VARIABLE'
+'define VARIABLE ='
+'define VARIABLE :='
+'define VARIABLE ::='
+'define VARIABLE +='
+'define VARIABLE ?='
+'endef'
+     Define multi-line variables.
+     *Note Multi-Line::.
+
+'undefine VARIABLE'
+     Undefining variables.
+     *Note Undefine Directive::.
+
+'ifdef VARIABLE'
+'ifndef VARIABLE'
+'ifeq (A,B)'
+'ifeq "A" "B"'
+'ifeq 'A' 'B''
+'ifneq (A,B)'
+'ifneq "A" "B"'
+'ifneq 'A' 'B''
+'else'
+'endif'
+     Conditionally evaluate part of the makefile.
+     *Note Conditionals::.
+
+'include FILE'
+'-include FILE'
+'sinclude FILE'
+     Include another makefile.
+     *Note Including Other Makefiles: Include.
+
+'override VARIABLE-ASSIGNMENT'
+     Define a variable, overriding any previous definition, even one
+     from the command line.
+     *Note The 'override' Directive: Override Directive.
+
+'export'
+     Tell 'make' to export all variables to child processes by default.
+     *Note Communicating Variables to a Sub-'make': Variables/Recursion.
+
+'export VARIABLE'
+'export VARIABLE-ASSIGNMENT'
+'unexport VARIABLE'
+     Tell 'make' whether or not to export a particular variable to child
+     processes.
+     *Note Communicating Variables to a Sub-'make': Variables/Recursion.
+
+'private VARIABLE-ASSIGNMENT'
+     Do not allow this variable assignment to be inherited by
+     prerequisites.
+     *Note Suppressing Inheritance::.
+
+'vpath PATTERN PATH'
+     Specify a search path for files matching a '%' pattern.
+     *Note The 'vpath' Directive: Selective Search.
+
+'vpath PATTERN'
+     Remove all search paths previously specified for PATTERN.
+
+'vpath'
+     Remove all search paths previously specified in any 'vpath'
+     directive.
+
+   Here is a summary of the built-in functions (*note Functions::):
+
+'$(subst FROM,TO,TEXT)'
+     Replace FROM with TO in TEXT.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(patsubst PATTERN,REPLACEMENT,TEXT)'
+     Replace words matching PATTERN with REPLACEMENT in TEXT.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(strip STRING)'
+     Remove excess whitespace characters from STRING.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(findstring FIND,TEXT)'
+     Locate FIND in TEXT.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(filter PATTERN...,TEXT)'
+     Select words in TEXT that match one of the PATTERN words.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(filter-out PATTERN...,TEXT)'
+     Select words in TEXT that _do not_ match any of the PATTERN words.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(sort LIST)'
+     Sort the words in LIST lexicographically, removing duplicates.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(word N,TEXT)'
+     Extract the Nth word (one-origin) of TEXT.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(words TEXT)'
+     Count the number of words in TEXT.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(wordlist S,E,TEXT)'
+     Returns the list of words in TEXT from S to E.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(firstword NAMES...)'
+     Extract the first word of NAMES.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(lastword NAMES...)'
+     Extract the last word of NAMES.
+     *Note Functions for String Substitution and Analysis: Text
+     Functions.
+
+'$(dir NAMES...)'
+     Extract the directory part of each file name.
+     *Note Functions for File Names: File Name Functions.
+
+'$(notdir NAMES...)'
+     Extract the non-directory part of each file name.
+     *Note Functions for File Names: File Name Functions.
+
+'$(suffix NAMES...)'
+     Extract the suffix (the last '.' and following characters) of each
+     file name.
+     *Note Functions for File Names: File Name Functions.
+
+'$(basename NAMES...)'
+     Extract the base name (name without suffix) of each file name.
+     *Note Functions for File Names: File Name Functions.
+
+'$(addsuffix SUFFIX,NAMES...)'
+     Append SUFFIX to each word in NAMES.
+     *Note Functions for File Names: File Name Functions.
+
+'$(addprefix PREFIX,NAMES...)'
+     Prepend PREFIX to each word in NAMES.
+     *Note Functions for File Names: File Name Functions.
+
+'$(join LIST1,LIST2)'
+     Join two parallel lists of words.
+     *Note Functions for File Names: File Name Functions.
+
+'$(wildcard PATTERN...)'
+     Find file names matching a shell file name pattern (_not_ a '%'
+     pattern).
+     *Note The Function 'wildcard': Wildcard Function.
+
+'$(realpath NAMES...)'
+     For each file name in NAMES, expand to an absolute name that does
+     not contain any '.', '..', nor symlinks.
+     *Note Functions for File Names: File Name Functions.
+
+'$(abspath NAMES...)'
+     For each file name in NAMES, expand to an absolute name that does
+     not contain any '.' or '..' components, but preserves symlinks.
+     *Note Functions for File Names: File Name Functions.
+
+'$(error TEXT...)'
+     When this function is evaluated, 'make' generates a fatal error
+     with the message TEXT.
+     *Note Functions That Control Make: Make Control Functions.
+
+'$(warning TEXT...)'
+     When this function is evaluated, 'make' generates a warning with
+     the message TEXT.
+     *Note Functions That Control Make: Make Control Functions.
+
+'$(shell COMMAND)'
+     Execute a shell command and return its output.
+     *Note The 'shell' Function: Shell Function.
+
+'$(origin VARIABLE)'
+     Return a string describing how the 'make' variable VARIABLE was
+     defined.
+     *Note The 'origin' Function: Origin Function.
+
+'$(flavor VARIABLE)'
+     Return a string describing the flavor of the 'make' variable
+     VARIABLE.
+     *Note The 'flavor' Function: Flavor Function.
+
+'$(foreach VAR,WORDS,TEXT)'
+     Evaluate TEXT with VAR bound to each word in WORDS, and concatenate
+     the results.
+     *Note The 'foreach' Function: Foreach Function.
+
+'$(if CONDITION,THEN-PART[,ELSE-PART])'
+     Evaluate the condition CONDITION; if it's non-empty substitute the
+     expansion of the THEN-PART otherwise substitute the expansion of
+     the ELSE-PART.
+     *Note Functions for Conditionals: Conditional Functions.
+
+'$(or CONDITION1[,CONDITION2[,CONDITION3...]])'
+     Evaluate each condition CONDITIONN one at a time; substitute the
+     first non-empty expansion.  If all expansions are empty, substitute
+     the empty string.
+     *Note Functions for Conditionals: Conditional Functions.
+
+'$(and CONDITION1[,CONDITION2[,CONDITION3...]])'
+     Evaluate each condition CONDITIONN one at a time; if any expansion
+     results in the empty string substitute the empty string.  If all
+     expansions result in a non-empty string, substitute the expansion
+     of the last CONDITION.
+     *Note Functions for Conditionals: Conditional Functions.
+
+'$(call VAR,PARAM,...)'
+     Evaluate the variable VAR replacing any references to '$(1)',
+     '$(2)' with the first, second, etc. PARAM values.
+     *Note The 'call' Function: Call Function.
+
+'$(eval TEXT)'
+     Evaluate TEXT then read the results as makefile commands.  Expands
+     to the empty string.
+     *Note The 'eval' Function: Eval Function.
+
+'$(file OP FILENAME,TEXT)'
+     Expand the arguments, then open the file FILENAME using mode OP and
+     write TEXT to that file.
+     *Note The 'file' Function: File Function.
+
+'$(value VAR)'
+     Evaluates to the contents of the variable VAR, with no expansion
+     performed on it.
+     *Note The 'value' Function: Value Function.
+
+   Here is a summary of the automatic variables.  *Note Automatic
+Variables::, for full information.
+
+'$@'
+     The file name of the target.
+
+'$%'
+     The target member name, when the target is an archive member.
+
+'$<'
+     The name of the first prerequisite.
+
+'$?'
+     The names of all the prerequisites that are newer than the target,
+     with spaces between them.  For prerequisites which are archive
+     members, only the named member is used (*note Archives::).
+
+'$^'
+'$+'
+     The names of all the prerequisites, with spaces between them.  For
+     prerequisites which are archive members, only the named member is
+     used (*note Archives::).  The value of '$^' omits duplicate
+     prerequisites, while '$+' retains them and preserves their order.
+
+'$*'
+     The stem with which an implicit rule matches (*note How Patterns
+     Match: Pattern Match.).
+
+'$(@D)'
+'$(@F)'
+     The directory part and the file-within-directory part of '$@'.
+
+'$(*D)'
+'$(*F)'
+     The directory part and the file-within-directory part of '$*'.
+
+'$(%D)'
+'$(%F)'
+     The directory part and the file-within-directory part of '$%'.
+
+'$(<D)'
+'$(<F)'
+     The directory part and the file-within-directory part of '$<'.
+
+'$(^D)'
+'$(^F)'
+     The directory part and the file-within-directory part of '$^'.
+
+'$(+D)'
+'$(+F)'
+     The directory part and the file-within-directory part of '$+'.
+
+'$(?D)'
+'$(?F)'
+     The directory part and the file-within-directory part of '$?'.
+
+   These variables are used specially by GNU 'make':
+
+'MAKEFILES'
+
+     Makefiles to be read on every invocation of 'make'.
+     *Note The Variable 'MAKEFILES': MAKEFILES Variable.
+
+'VPATH'
+
+     Directory search path for files not found in the current directory.
+     *Note 'VPATH' Search Path for All Prerequisites: General Search.
+
+'SHELL'
+
+     The name of the system default command interpreter, usually
+     '/bin/sh'.  You can set 'SHELL' in the makefile to change the shell
+     used to run recipes.  *Note Recipe Execution: Execution.  The
+     'SHELL' variable is handled specially when importing from and
+     exporting to the environment.  *Note Choosing the Shell::.
+
+'MAKESHELL'
+
+     On MS-DOS only, the name of the command interpreter that is to be
+     used by 'make'.  This value takes precedence over the value of
+     'SHELL'.  *Note MAKESHELL variable: Execution.
+
+'MAKE'
+
+     The name with which 'make' was invoked.  Using this variable in
+     recipes has special meaning.  *Note How the 'MAKE' Variable Works:
+     MAKE Variable.
+
+'MAKE_VERSION'
+
+     The built-in variable 'MAKE_VERSION' expands to the version number
+     of the GNU 'make' program.
+
+'MAKE_HOST'
+
+     The built-in variable 'MAKE_HOST' expands to a string representing
+     the host that GNU 'make' was built to run on.
+
+'MAKELEVEL'
+
+     The number of levels of recursion (sub-'make's).
+     *Note Variables/Recursion::.
+
+'MAKEFLAGS'
+
+     The flags given to 'make'.  You can set this in the environment or
+     a makefile to set flags.
+     *Note Communicating Options to a Sub-'make': Options/Recursion.
+
+     It is _never_ appropriate to use 'MAKEFLAGS' directly in a recipe
+     line: its contents may not be quoted correctly for use in the
+     shell.  Always allow recursive 'make''s to obtain these values
+     through the environment from its parent.
+
+'GNUMAKEFLAGS'
+
+     Other flags parsed by 'make'.  You can set this in the environment
+     or a makefile to set 'make' command-line flags.  GNU 'make' never
+     sets this variable itself.  This variable is only needed if you'd
+     like to set GNU 'make'-specific flags in a POSIX-compliant
+     makefile.  This variable will be seen by GNU 'make' and ignored by
+     other 'make' implementations.  It's not needed if you only use GNU
+     'make'; just use 'MAKEFLAGS' directly.  *Note Communicating Options
+     to a Sub-'make': Options/Recursion.
+
+'MAKECMDGOALS'
+
+     The targets given to 'make' on the command line.  Setting this
+     variable has no effect on the operation of 'make'.
+     *Note Arguments to Specify the Goals: Goals.
+
+'CURDIR'
+
+     Set to the pathname of the current working directory (after all
+     '-C' options are processed, if any).  Setting this variable has no
+     effect on the operation of 'make'.
+     *Note Recursive Use of 'make': Recursion.
+
+'SUFFIXES'
+
+     The default list of suffixes before 'make' reads any makefiles.
+
+'.LIBPATTERNS'
+     Defines the naming of the libraries 'make' searches for, and their
+     order.
+     *Note Directory Search for Link Libraries: Libraries/Search.
+
+
+File: make.info,  Node: Error Messages,  Next: Complex Makefile,  Prev: Quick Reference,  Up: Top
+
+Appendix B Errors Generated by Make
+***********************************
+
+Here is a list of the more common errors you might see generated by
+'make', and some information about what they mean and how to fix them.
+
+   Sometimes 'make' errors are not fatal, especially in the presence of
+a '-' prefix on a recipe line, or the '-k' command line option.  Errors
+that are fatal are prefixed with the string '***'.
+
+   Error messages are all either prefixed with the name of the program
+(usually 'make'), or, if the error is found in a makefile, the name of
+the file and line number containing the problem.
+
+   In the table below, these common prefixes are left off.
+
+'[FOO] Error NN'
+'[FOO] SIGNAL DESCRIPTION'
+     These errors are not really 'make' errors at all.  They mean that a
+     program that 'make' invoked as part of a recipe returned a non-0
+     error code ('Error NN'), which 'make' interprets as failure, or it
+     exited in some other abnormal fashion (with a signal of some type).
+     *Note Errors in Recipes: Errors.
+
+     If no '***' is attached to the message, then the sub-process failed
+     but the rule in the makefile was prefixed with the '-' special
+     character, so 'make' ignored the error.
+
+'missing separator. Stop.'
+'missing separator (did you mean TAB instead of 8 spaces?). Stop.'
+     This means that 'make' could not understand much of anything about
+     the makefile line it just read.  GNU 'make' looks for various
+     separators (':', '=', recipe prefix characters, etc.)  to indicate
+     what kind of line it's parsing.  This message means it couldn't
+     find a valid one.
+
+     One of the most common reasons for this message is that you (or
+     perhaps your oh-so-helpful editor, as is the case with many
+     MS-Windows editors) have attempted to indent your recipe lines with
+     spaces instead of a tab character.  In this case, 'make' will use
+     the second form of the error above.  Remember that every line in
+     the recipe must begin with a tab character (unless you set
+     '.RECIPEPREFIX'; *note Special Variables::).  Eight spaces do not
+     count.  *Note Rule Syntax::.
+
+'recipe commences before first target. Stop.'
+'missing rule before recipe. Stop.'
+     This means the first thing in the makefile seems to be part of a
+     recipe: it begins with a recipe prefix character and doesn't appear
+     to be a legal 'make' directive (such as a variable assignment).
+     Recipes must always be associated with a target.
+
+     The second form is generated if the line has a semicolon as the
+     first non-whitespace character; 'make' interprets this to mean you
+     left out the "target: prerequisite" section of a rule.  *Note Rule
+     Syntax::.
+
+'No rule to make target `XXX'.'
+'No rule to make target `XXX', needed by `YYY'.'
+     This means that 'make' decided it needed to build a target, but
+     then couldn't find any instructions in the makefile on how to do
+     that, either explicit or implicit (including in the default rules
+     database).
+
+     If you want that file to be built, you will need to add a rule to
+     your makefile describing how that target can be built.  Other
+     possible sources of this problem are typos in the makefile (if that
+     file name is wrong) or a corrupted source tree (if that file is not
+     supposed to be built, but rather only a prerequisite).
+
+'No targets specified and no makefile found. Stop.'
+'No targets. Stop.'
+     The former means that you didn't provide any targets to be built on
+     the command line, and 'make' couldn't find any makefiles to read
+     in.  The latter means that some makefile was found, but it didn't
+     contain any default goal and none was given on the command line.
+     GNU 'make' has nothing to do in these situations.  *Note Arguments
+     to Specify the Makefile: Makefile Arguments.
+
+'Makefile `XXX' was not found.'
+'Included makefile `XXX' was not found.'
+     A makefile specified on the command line (first form) or included
+     (second form) was not found.
+
+'warning: overriding recipe for target `XXX''
+'warning: ignoring old recipe for target `XXX''
+     GNU 'make' allows only one recipe to be specified per target
+     (except for double-colon rules).  If you give a recipe for a target
+     which already has been defined to have one, this warning is issued
+     and the second recipe will overwrite the first.  *Note Multiple
+     Rules for One Target: Multiple Rules.
+
+'Circular XXX <- YYY dependency dropped.'
+     This means that 'make' detected a loop in the dependency graph:
+     after tracing the prerequisite YYY of target XXX, and its
+     prerequisites, etc., one of them depended on XXX again.
+
+'Recursive variable `XXX' references itself (eventually). Stop.'
+     This means you've defined a normal (recursive) 'make' variable XXX
+     that, when it's expanded, will refer to itself (XXX).  This is not
+     allowed; either use simply-expanded variables (':=' or '::=') or
+     use the append operator ('+=').  *Note How to Use Variables: Using
+     Variables.
+
+'Unterminated variable reference. Stop.'
+     This means you forgot to provide the proper closing parenthesis or
+     brace in your variable or function reference.
+
+'insufficient arguments to function `XXX'. Stop.'
+     This means you haven't provided the requisite number of arguments
+     for this function.  See the documentation of the function for a
+     description of its arguments.  *Note Functions for Transforming
+     Text: Functions.
+
+'missing target pattern. Stop.'
+'multiple target patterns. Stop.'
+'target pattern contains no `%'. Stop.'
+'mixed implicit and static pattern rules. Stop.'
+     These are generated for malformed static pattern rules.  The first
+     means there's no pattern in the target section of the rule; the
+     second means there are multiple patterns in the target section; the
+     third means the target doesn't contain a pattern character ('%');
+     and the fourth means that all three parts of the static pattern
+     rule contain pattern characters ('%')-only the first two parts
+     should.  If you see these errors and you aren't trying to create a
+     static pattern rule, check the value of any variables in your
+     target and prerequisite lists to be sure they do not contain
+     colons.  *Note Syntax of Static Pattern Rules: Static Usage.
+
+'warning: -jN forced in submake: disabling jobserver mode.'
+     This warning and the next are generated if 'make' detects error
+     conditions related to parallel processing on systems where
+     sub-'make's can communicate (*note Communicating Options to a
+     Sub-'make': Options/Recursion.).  This warning is generated if a
+     recursive invocation of a 'make' process is forced to have '-jN' in
+     its argument list (where N is greater than one).  This could
+     happen, for example, if you set the 'MAKE' environment variable to
+     'make -j2'.  In this case, the sub-'make' doesn't communicate with
+     other 'make' processes and will simply pretend it has two jobs of
+     its own.
+
+'warning: jobserver unavailable: using -j1. Add `+' to parent make rule.'
+     In order for 'make' processes to communicate, the parent will pass
+     information to the child.  Since this could result in problems if
+     the child process isn't actually a 'make', the parent will only do
+     this if it thinks the child is a 'make'.  The parent uses the
+     normal algorithms to determine this (*note How the 'MAKE' Variable
+     Works: MAKE Variable.).  If the makefile is constructed such that
+     the parent doesn't know the child is a 'make' process, then the
+     child will receive only part of the information necessary.  In this
+     case, the child will generate this warning message and proceed with
+     its build in a sequential manner.
+
+
+File: make.info,  Node: Complex Makefile,  Next: GNU Free Documentation License,  Prev: Error Messages,  Up: Top
+
+Appendix C Complex Makefile Example
+***********************************
+
+Here is the makefile for the GNU 'tar' program.  This is a moderately
+complex makefile.  The first line uses a '#!' setting to allow the
+makefile to be executed directly.
+
+   Because it is the first target, the default goal is 'all'.  An
+interesting feature of this makefile is that 'testpad.h' is a source
+file automatically created by the 'testpad' program, itself compiled
+from 'testpad.c'.
+
+   If you type 'make' or 'make all', then 'make' creates the 'tar'
+executable, the 'rmt' daemon that provides remote tape access, and the
+'tar.info' Info file.
+
+   If you type 'make install', then 'make' not only creates 'tar',
+'rmt', and 'tar.info', but also installs them.
+
+   If you type 'make clean', then 'make' removes the '.o' files, and the
+'tar', 'rmt', 'testpad', 'testpad.h', and 'core' files.
+
+   If you type 'make distclean', then 'make' not only removes the same
+files as does 'make clean' but also the 'TAGS', 'Makefile', and
+'config.status' files.  (Although it is not evident, this makefile (and
+'config.status') is generated by the user with the 'configure' program,
+which is provided in the 'tar' distribution, but is not shown here.)
+
+   If you type 'make realclean', then 'make' removes the same files as
+does 'make distclean' and also removes the Info files generated from
+'tar.texinfo'.
+
+   In addition, there are targets 'shar' and 'dist' that create
+distribution kits.
+
+     #!/usr/bin/make -f
+     # Generated automatically from Makefile.in by configure.
+     # Un*x Makefile for GNU tar program.
+     # Copyright (C) 1991 Free Software Foundation, Inc.
+
+     # This program is free software; you can redistribute
+     # it and/or modify it under the terms of the GNU
+     # General Public License ...
+     ...
+     ...
+
+     SHELL = /bin/sh
+
+     #### Start of system configuration section. ####
+
+     srcdir = .
+
+     # If you use gcc, you should either run the
+     # fixincludes script that comes with it or else use
+     # gcc with the -traditional option.  Otherwise ioctl
+     # calls will be compiled incorrectly on some systems.
+     CC = gcc -O
+     YACC = bison -y
+     INSTALL = /usr/local/bin/install -c
+     INSTALLDATA = /usr/local/bin/install -c -m 644
+
+     # Things you might add to DEFS:
+     # -DSTDC_HEADERS        If you have ANSI C headers and
+     #                       libraries.
+     # -DPOSIX               If you have POSIX.1 headers and
+     #                       libraries.
+     # -DBSD42               If you have sys/dir.h (unless
+     #                       you use -DPOSIX), sys/file.h,
+     #                       and st_blocks in `struct stat'.
+     # -DUSG                 If you have System V/ANSI C
+     #                       string and memory functions
+     #                       and headers, sys/sysmacros.h,
+     #                       fcntl.h, getcwd, no valloc,
+     #                       and ndir.h (unless
+     #                       you use -DDIRENT).
+     # -DNO_MEMORY_H         If USG or STDC_HEADERS but do not
+     #                       include memory.h.
+     # -DDIRENT              If USG and you have dirent.h
+     #                       instead of ndir.h.
+     # -DSIGTYPE=int         If your signal handlers
+     #                       return int, not void.
+     # -DNO_MTIO             If you lack sys/mtio.h
+     #                       (magtape ioctls).
+     # -DNO_REMOTE           If you do not have a remote shell
+     #                       or rexec.
+     # -DUSE_REXEC           To use rexec for remote tape
+     #                       operations instead of
+     #                       forking rsh or remsh.
+     # -DVPRINTF_MISSING     If you lack vprintf function
+     #                       (but have _doprnt).
+     # -DDOPRNT_MISSING      If you lack _doprnt function.
+     #                       Also need to define
+     #                       -DVPRINTF_MISSING.
+     # -DFTIME_MISSING       If you lack ftime system call.
+     # -DSTRSTR_MISSING      If you lack strstr function.
+     # -DVALLOC_MISSING      If you lack valloc function.
+     # -DMKDIR_MISSING       If you lack mkdir and
+     #                       rmdir system calls.
+     # -DRENAME_MISSING      If you lack rename system call.
+     # -DFTRUNCATE_MISSING   If you lack ftruncate
+     #                       system call.
+     # -DV7                  On Version 7 Unix (not
+     #                       tested in a long time).
+     # -DEMUL_OPEN3          If you lack a 3-argument version
+     #                       of open, and want to emulate it
+     #                       with system calls you do have.
+     # -DNO_OPEN3            If you lack the 3-argument open
+     #                       and want to disable the tar -k
+     #                       option instead of emulating open.
+     # -DXENIX               If you have sys/inode.h
+     #                       and need it 94 to be included.
+
+     DEFS =  -DSIGTYPE=int -DDIRENT -DSTRSTR_MISSING \
+             -DVPRINTF_MISSING -DBSD42
+     # Set this to rtapelib.o unless you defined NO_REMOTE,
+     # in which case make it empty.
+     RTAPELIB = rtapelib.o
+     LIBS =
+     DEF_AR_FILE = /dev/rmt8
+     DEFBLOCKING = 20
+
+     CDEBUG = -g
+     CFLAGS = $(CDEBUG) -I. -I$(srcdir) $(DEFS) \
+             -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" \
+             -DDEFBLOCKING=$(DEFBLOCKING)
+     LDFLAGS = -g
+
+     prefix = /usr/local
+     # Prefix for each installed program,
+     # normally empty or `g'.
+     binprefix =
+
+     # The directory to install tar in.
+     bindir = $(prefix)/bin
+
+     # The directory to install the info files in.
+     infodir = $(prefix)/info
+
+     #### End of system configuration section. ####
+
+     SRCS_C  = tar.c create.c extract.c buffer.c   \
+               getoldopt.c update.c gnu.c mangle.c \
+               version.c list.c names.c diffarch.c \
+               port.c wildmat.c getopt.c getopt1.c \
+               regex.c
+     SRCS_Y  = getdate.y
+     SRCS    = $(SRCS_C) $(SRCS_Y)
+     OBJS    = $(SRCS_C:.c=.o) $(SRCS_Y:.y=.o) $(RTAPELIB)
+     AUX =   README COPYING ChangeLog Makefile.in  \
+             makefile.pc configure configure.in \
+             tar.texinfo tar.info* texinfo.tex \
+             tar.h port.h open3.h getopt.h regex.h \
+             rmt.h rmt.c rtapelib.c alloca.c \
+             msd_dir.h msd_dir.c tcexparg.c \
+             level-0 level-1 backup-specs testpad.c
+
+     .PHONY: all
+     all:    tar rmt tar.info
+
+     tar:    $(OBJS)
+             $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+     rmt:    rmt.c
+             $(CC) $(CFLAGS) $(LDFLAGS) -o $@ rmt.c
+
+     tar.info: tar.texinfo
+             makeinfo tar.texinfo
+
+     .PHONY: install
+     install: all
+             $(INSTALL) tar $(bindir)/$(binprefix)tar
+             -test ! -f rmt || $(INSTALL) rmt /etc/rmt
+             $(INSTALLDATA) $(srcdir)/tar.info* $(infodir)
+
+     $(OBJS): tar.h port.h testpad.h
+     regex.o buffer.o tar.o: regex.h
+     # getdate.y has 8 shift/reduce conflicts.
+
+     testpad.h: testpad
+             ./testpad
+
+     testpad: testpad.o
+             $(CC) -o $@ testpad.o
+
+     TAGS:   $(SRCS)
+             etags $(SRCS)
+
+     .PHONY: clean
+     clean:
+             rm -f *.o tar rmt testpad testpad.h core
+
+     .PHONY: distclean
+     distclean: clean
+             rm -f TAGS Makefile config.status
+
+     .PHONY: realclean
+     realclean: distclean
+             rm -f tar.info*
+
+     .PHONY: shar
+     shar: $(SRCS) $(AUX)
+             shar $(SRCS) $(AUX) | compress \
+               > tar-`sed -e '/version_string/!d' \
+                          -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
+                          -e q
+                          version.c`.shar.Z
+
+     .PHONY: dist
+     dist: $(SRCS) $(AUX)
+             echo tar-`sed \
+                  -e '/version_string/!d' \
+                  -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
+                  -e q
+                  version.c` > .fname
+             -rm -rf `cat .fname`
+             mkdir `cat .fname`
+             ln $(SRCS) $(AUX) `cat .fname`
+             tar chZf `cat .fname`.tar.Z `cat .fname`
+             -rm -rf `cat .fname` .fname
+
+     tar.zoo: $(SRCS) $(AUX)
+             -rm -rf tmp.dir
+             -mkdir tmp.dir
+             -rm tar.zoo
+             for X in $(SRCS) $(AUX) ; do \
+                 echo $$X ; \
+                 sed 's/$$/^M/' $$X \
+                 > tmp.dir/$$X ; done
+             cd tmp.dir ; zoo aM ../tar.zoo *
+             -rm -rf tmp.dir
+
+
+File: make.info,  Node: GNU Free Documentation License,  Next: Concept Index,  Prev: Complex Makefile,  Up: Top
+
+C.1 GNU Free Documentation License
+==================================
+
+                     Version 1.3, 3 November 2008
+
+     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     <http://fsf.org/>
+
+     Everyone is permitted to copy and distribute verbatim copies
+     of this license document, but changing it is not allowed.
+
+  0. PREAMBLE
+
+     The purpose of this License is to make a manual, textbook, or other
+     functional and useful document "free" in the sense of freedom: to
+     assure everyone the effective freedom to copy and redistribute it,
+     with or without modifying it, either commercially or
+     noncommercially.  Secondarily, this License preserves for the
+     author and publisher a way to get credit for their work, while not
+     being considered responsible for modifications made by others.
+
+     This License is a kind of "copyleft", which means that derivative
+     works of the document must themselves be free in the same sense.
+     It complements the GNU General Public License, which is a copyleft
+     license designed for free software.
+
+     We have designed this License in order to use it for manuals for
+     free software, because free software needs free documentation: a
+     free program should come with manuals providing the same freedoms
+     that the software does.  But this License is not limited to
+     software manuals; it can be used for any textual work, regardless
+     of subject matter or whether it is published as a printed book.  We
+     recommend this License principally for works whose purpose is
+     instruction or reference.
+
+  1. APPLICABILITY AND DEFINITIONS
+
+     This License applies to any manual or other work, in any medium,
+     that contains a notice placed by the copyright holder saying it can
+     be distributed under the terms of this License.  Such a notice
+     grants a world-wide, royalty-free license, unlimited in duration,
+     to use that work under the conditions stated herein.  The
+     "Document", below, refers to any such manual or work.  Any member
+     of the public is a licensee, and is addressed as "you".  You accept
+     the license if you copy, modify or distribute the work in a way
+     requiring permission under copyright law.
+
+     A "Modified Version" of the Document means any work containing the
+     Document or a portion of it, either copied verbatim, or with
+     modifications and/or translated into another language.
+
+     A "Secondary Section" is a named appendix or a front-matter section
+     of the Document that deals exclusively with the relationship of the
+     publishers or authors of the Document to the Document's overall
+     subject (or to related matters) and contains nothing that could
+     fall directly within that overall subject.  (Thus, if the Document
+     is in part a textbook of mathematics, a Secondary Section may not
+     explain any mathematics.)  The relationship could be a matter of
+     historical connection with the subject or with related matters, or
+     of legal, commercial, philosophical, ethical or political position
+     regarding them.
+
+     The "Invariant Sections" are certain Secondary Sections whose
+     titles are designated, as being those of Invariant Sections, in the
+     notice that says that the Document is released under this License.
+     If a section does not fit the above definition of Secondary then it
+     is not allowed to be designated as Invariant.  The Document may
+     contain zero Invariant Sections.  If the Document does not identify
+     any Invariant Sections then there are none.
+
+     The "Cover Texts" are certain short passages of text that are
+     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+     that says that the Document is released under this License.  A
+     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+     be at most 25 words.
+
+     A "Transparent" copy of the Document means a machine-readable copy,
+     represented in a format whose specification is available to the
+     general public, that is suitable for revising the document
+     straightforwardly with generic text editors or (for images composed
+     of pixels) generic paint programs or (for drawings) some widely
+     available drawing editor, and that is suitable for input to text
+     formatters or for automatic translation to a variety of formats
+     suitable for input to text formatters.  A copy made in an otherwise
+     Transparent file format whose markup, or absence of markup, has
+     been arranged to thwart or discourage subsequent modification by
+     readers is not Transparent.  An image format is not Transparent if
+     used for any substantial amount of text.  A copy that is not
+     "Transparent" is called "Opaque".
+
+     Examples of suitable formats for Transparent copies include plain
+     ASCII without markup, Texinfo input format, LaTeX input format,
+     SGML or XML using a publicly available DTD, and standard-conforming
+     simple HTML, PostScript or PDF designed for human modification.
+     Examples of transparent image formats include PNG, XCF and JPG.
+     Opaque formats include proprietary formats that can be read and
+     edited only by proprietary word processors, SGML or XML for which
+     the DTD and/or processing tools are not generally available, and
+     the machine-generated HTML, PostScript or PDF produced by some word
+     processors for output purposes only.
+
+     The "Title Page" means, for a printed book, the title page itself,
+     plus such following pages as are needed to hold, legibly, the
+     material this License requires to appear in the title page.  For
+     works in formats which do not have any title page as such, "Title
+     Page" means the text near the most prominent appearance of the
+     work's title, preceding the beginning of the body of the text.
+
+     The "publisher" means any person or entity that distributes copies
+     of the Document to the public.
+
+     A section "Entitled XYZ" means a named subunit of the Document
+     whose title either is precisely XYZ or contains XYZ in parentheses
+     following text that translates XYZ in another language.  (Here XYZ
+     stands for a specific section name mentioned below, such as
+     "Acknowledgements", "Dedications", "Endorsements", or "History".)
+     To "Preserve the Title" of such a section when you modify the
+     Document means that it remains a section "Entitled XYZ" according
+     to this definition.
+
+     The Document may include Warranty Disclaimers next to the notice
+     which states that this License applies to the Document.  These
+     Warranty Disclaimers are considered to be included by reference in
+     this License, but only as regards disclaiming warranties: any other
+     implication that these Warranty Disclaimers may have is void and
+     has no effect on the meaning of this License.
+
+  2. VERBATIM COPYING
+
+     You may copy and distribute the Document in any medium, either
+     commercially or noncommercially, provided that this License, the
+     copyright notices, and the license notice saying this License
+     applies to the Document are reproduced in all copies, and that you
+     add no other conditions whatsoever to those of this License.  You
+     may not use technical measures to obstruct or control the reading
+     or further copying of the copies you make or distribute.  However,
+     you may accept compensation in exchange for copies.  If you
+     distribute a large enough number of copies you must also follow the
+     conditions in section 3.
+
+     You may also lend copies, under the same conditions stated above,
+     and you may publicly display copies.
+
+  3. COPYING IN QUANTITY
+
+     If you publish printed copies (or copies in media that commonly
+     have printed covers) of the Document, numbering more than 100, and
+     the Document's license notice requires Cover Texts, you must
+     enclose the copies in covers that carry, clearly and legibly, all
+     these Cover Texts: Front-Cover Texts on the front cover, and
+     Back-Cover Texts on the back cover.  Both covers must also clearly
+     and legibly identify you as the publisher of these copies.  The
+     front cover must present the full title with all words of the title
+     equally prominent and visible.  You may add other material on the
+     covers in addition.  Copying with changes limited to the covers, as
+     long as they preserve the title of the Document and satisfy these
+     conditions, can be treated as verbatim copying in other respects.
+
+     If the required texts for either cover are too voluminous to fit
+     legibly, you should put the first ones listed (as many as fit
+     reasonably) on the actual cover, and continue the rest onto
+     adjacent pages.
+
+     If you publish or distribute Opaque copies of the Document
+     numbering more than 100, you must either include a machine-readable
+     Transparent copy along with each Opaque copy, or state in or with
+     each Opaque copy a computer-network location from which the general
+     network-using public has access to download using public-standard
+     network protocols a complete Transparent copy of the Document, free
+     of added material.  If you use the latter option, you must take
+     reasonably prudent steps, when you begin distribution of Opaque
+     copies in quantity, to ensure that this Transparent copy will
+     remain thus accessible at the stated location until at least one
+     year after the last time you distribute an Opaque copy (directly or
+     through your agents or retailers) of that edition to the public.
+
+     It is requested, but not required, that you contact the authors of
+     the Document well before redistributing any large number of copies,
+     to give them a chance to provide you with an updated version of the
+     Document.
+
+  4. MODIFICATIONS
+
+     You may copy and distribute a Modified Version of the Document
+     under the conditions of sections 2 and 3 above, provided that you
+     release the Modified Version under precisely this License, with the
+     Modified Version filling the role of the Document, thus licensing
+     distribution and modification of the Modified Version to whoever
+     possesses a copy of it.  In addition, you must do these things in
+     the Modified Version:
+
+       A. Use in the Title Page (and on the covers, if any) a title
+          distinct from that of the Document, and from those of previous
+          versions (which should, if there were any, be listed in the
+          History section of the Document).  You may use the same title
+          as a previous version if the original publisher of that
+          version gives permission.
+
+       B. List on the Title Page, as authors, one or more persons or
+          entities responsible for authorship of the modifications in
+          the Modified Version, together with at least five of the
+          principal authors of the Document (all of its principal
+          authors, if it has fewer than five), unless they release you
+          from this requirement.
+
+       C. State on the Title page the name of the publisher of the
+          Modified Version, as the publisher.
+
+       D. Preserve all the copyright notices of the Document.
+
+       E. Add an appropriate copyright notice for your modifications
+          adjacent to the other copyright notices.
+
+       F. Include, immediately after the copyright notices, a license
+          notice giving the public permission to use the Modified
+          Version under the terms of this License, in the form shown in
+          the Addendum below.
+
+       G. Preserve in that license notice the full lists of Invariant
+          Sections and required Cover Texts given in the Document's
+          license notice.
+
+       H. Include an unaltered copy of this License.
+
+       I. Preserve the section Entitled "History", Preserve its Title,
+          and add to it an item stating at least the title, year, new
+          authors, and publisher of the Modified Version as given on the
+          Title Page.  If there is no section Entitled "History" in the
+          Document, create one stating the title, year, authors, and
+          publisher of the Document as given on its Title Page, then add
+          an item describing the Modified Version as stated in the
+          previous sentence.
+
+       J. Preserve the network location, if any, given in the Document
+          for public access to a Transparent copy of the Document, and
+          likewise the network locations given in the Document for
+          previous versions it was based on.  These may be placed in the
+          "History" section.  You may omit a network location for a work
+          that was published at least four years before the Document
+          itself, or if the original publisher of the version it refers
+          to gives permission.
+
+       K. For any section Entitled "Acknowledgements" or "Dedications",
+          Preserve the Title of the section, and preserve in the section
+          all the substance and tone of each of the contributor
+          acknowledgements and/or dedications given therein.
+
+       L. Preserve all the Invariant Sections of the Document, unaltered
+          in their text and in their titles.  Section numbers or the
+          equivalent are not considered part of the section titles.
+
+       M. Delete any section Entitled "Endorsements".  Such a section
+          may not be included in the Modified Version.
+
+       N. Do not retitle any existing section to be Entitled
+          "Endorsements" or to conflict in title with any Invariant
+          Section.
+
+       O. Preserve any Warranty Disclaimers.
+
+     If the Modified Version includes new front-matter sections or
+     appendices that qualify as Secondary Sections and contain no
+     material copied from the Document, you may at your option designate
+     some or all of these sections as invariant.  To do this, add their
+     titles to the list of Invariant Sections in the Modified Version's
+     license notice.  These titles must be distinct from any other
+     section titles.
+
+     You may add a section Entitled "Endorsements", provided it contains
+     nothing but endorsements of your Modified Version by various
+     parties--for example, statements of peer review or that the text
+     has been approved by an organization as the authoritative
+     definition of a standard.
+
+     You may add a passage of up to five words as a Front-Cover Text,
+     and a passage of up to 25 words as a Back-Cover Text, to the end of
+     the list of Cover Texts in the Modified Version.  Only one passage
+     of Front-Cover Text and one of Back-Cover Text may be added by (or
+     through arrangements made by) any one entity.  If the Document
+     already includes a cover text for the same cover, previously added
+     by you or by arrangement made by the same entity you are acting on
+     behalf of, you may not add another; but you may replace the old
+     one, on explicit permission from the previous publisher that added
+     the old one.
+
+     The author(s) and publisher(s) of the Document do not by this
+     License give permission to use their names for publicity for or to
+     assert or imply endorsement of any Modified Version.
+
+  5. COMBINING DOCUMENTS
+
+     You may combine the Document with other documents released under
+     this License, under the terms defined in section 4 above for
+     modified versions, provided that you include in the combination all
+     of the Invariant Sections of all of the original documents,
+     unmodified, and list them all as Invariant Sections of your
+     combined work in its license notice, and that you preserve all
+     their Warranty Disclaimers.
+
+     The combined work need only contain one copy of this License, and
+     multiple identical Invariant Sections may be replaced with a single
+     copy.  If there are multiple Invariant Sections with the same name
+     but different contents, make the title of each such section unique
+     by adding at the end of it, in parentheses, the name of the
+     original author or publisher of that section if known, or else a
+     unique number.  Make the same adjustment to the section titles in
+     the list of Invariant Sections in the license notice of the
+     combined work.
+
+     In the combination, you must combine any sections Entitled
+     "History" in the various original documents, forming one section
+     Entitled "History"; likewise combine any sections Entitled
+     "Acknowledgements", and any sections Entitled "Dedications".  You
+     must delete all sections Entitled "Endorsements."
+
+  6. COLLECTIONS OF DOCUMENTS
+
+     You may make a collection consisting of the Document and other
+     documents released under this License, and replace the individual
+     copies of this License in the various documents with a single copy
+     that is included in the collection, provided that you follow the
+     rules of this License for verbatim copying of each of the documents
+     in all other respects.
+
+     You may extract a single document from such a collection, and
+     distribute it individually under this License, provided you insert
+     a copy of this License into the extracted document, and follow this
+     License in all other respects regarding verbatim copying of that
+     document.
+
+  7. AGGREGATION WITH INDEPENDENT WORKS
+
+     A compilation of the Document or its derivatives with other
+     separate and independent documents or works, in or on a volume of a
+     storage or distribution medium, is called an "aggregate" if the
+     copyright resulting from the compilation is not used to limit the
+     legal rights of the compilation's users beyond what the individual
+     works permit.  When the Document is included in an aggregate, this
+     License does not apply to the other works in the aggregate which
+     are not themselves derivative works of the Document.
+
+     If the Cover Text requirement of section 3 is applicable to these
+     copies of the Document, then if the Document is less than one half
+     of the entire aggregate, the Document's Cover Texts may be placed
+     on covers that bracket the Document within the aggregate, or the
+     electronic equivalent of covers if the Document is in electronic
+     form.  Otherwise they must appear on printed covers that bracket
+     the whole aggregate.
+
+  8. TRANSLATION
+
+     Translation is considered a kind of modification, so you may
+     distribute translations of the Document under the terms of section
+     4.  Replacing Invariant Sections with translations requires special
+     permission from their copyright holders, but you may include
+     translations of some or all Invariant Sections in addition to the
+     original versions of these Invariant Sections.  You may include a
+     translation of this License, and all the license notices in the
+     Document, and any Warranty Disclaimers, provided that you also
+     include the original English version of this License and the
+     original versions of those notices and disclaimers.  In case of a
+     disagreement between the translation and the original version of
+     this License or a notice or disclaimer, the original version will
+     prevail.
+
+     If a section in the Document is Entitled "Acknowledgements",
+     "Dedications", or "History", the requirement (section 4) to
+     Preserve its Title (section 1) will typically require changing the
+     actual title.
+
+  9. TERMINATION
+
+     You may not copy, modify, sublicense, or distribute the Document
+     except as expressly provided under this License.  Any attempt
+     otherwise to copy, modify, sublicense, or distribute it is void,
+     and will automatically terminate your rights under this License.
+
+     However, if you cease all violation of this License, then your
+     license from a particular copyright holder is reinstated (a)
+     provisionally, unless and until the copyright holder explicitly and
+     finally terminates your license, and (b) permanently, if the
+     copyright holder fails to notify you of the violation by some
+     reasonable means prior to 60 days after the cessation.
+
+     Moreover, your license from a particular copyright holder is
+     reinstated permanently if the copyright holder notifies you of the
+     violation by some reasonable means, this is the first time you have
+     received notice of violation of this License (for any work) from
+     that copyright holder, and you cure the violation prior to 30 days
+     after your receipt of the notice.
+
+     Termination of your rights under this section does not terminate
+     the licenses of parties who have received copies or rights from you
+     under this License.  If your rights have been terminated and not
+     permanently reinstated, receipt of a copy of some or all of the
+     same material does not give you any rights to use it.
+
+  10. FUTURE REVISIONS OF THIS LICENSE
+
+     The Free Software Foundation may publish new, revised versions of
+     the GNU Free Documentation License from time to time.  Such new
+     versions will be similar in spirit to the present version, but may
+     differ in detail to address new problems or concerns.  See
+     <http://www.gnu.org/copyleft/>.
+
+     Each version of the License is given a distinguishing version
+     number.  If the Document specifies that a particular numbered
+     version of this License "or any later version" applies to it, you
+     have the option of following the terms and conditions either of
+     that specified version or of any later version that has been
+     published (not as a draft) by the Free Software Foundation.  If the
+     Document does not specify a version number of this License, you may
+     choose any version ever published (not as a draft) by the Free
+     Software Foundation.  If the Document specifies that a proxy can
+     decide which future versions of this License can be used, that
+     proxy's public statement of acceptance of a version permanently
+     authorizes you to choose that version for the Document.
+
+  11. RELICENSING
+
+     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+     World Wide Web server that publishes copyrightable works and also
+     provides prominent facilities for anybody to edit those works.  A
+     public wiki that anybody can edit is an example of such a server.
+     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
+     site means any set of copyrightable works thus published on the MMC
+     site.
+
+     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
+     license published by Creative Commons Corporation, a not-for-profit
+     corporation with a principal place of business in San Francisco,
+     California, as well as future copyleft versions of that license
+     published by that same organization.
+
+     "Incorporate" means to publish or republish a Document, in whole or
+     in part, as part of another Document.
+
+     An MMC is "eligible for relicensing" if it is licensed under this
+     License, and if all works that were first published under this
+     License somewhere other than this MMC, and subsequently
+     incorporated in whole or in part into the MMC, (1) had no cover
+     texts or invariant sections, and (2) were thus incorporated prior
+     to November 1, 2008.
+
+     The operator of an MMC Site may republish an MMC contained in the
+     site under CC-BY-SA on the same site at any time before August 1,
+     2009, provided the MMC is eligible for relicensing.
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+       Copyright (C)  YEAR  YOUR NAME.
+       Permission is granted to copy, distribute and/or modify this document
+       under the terms of the GNU Free Documentation License, Version 1.3
+       or any later version published by the Free Software Foundation;
+       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+       Texts.  A copy of the license is included in the section entitled ``GNU
+       Free Documentation License''.
+
+   If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts." line with this:
+
+         with the Invariant Sections being LIST THEIR TITLES, with
+         the Front-Cover Texts being LIST, and with the Back-Cover Texts
+         being LIST.
+
+   If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+   If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of free
+software license, such as the GNU General Public License, to permit
+their use in free software.
+
+
+File: make.info,  Node: Concept Index,  Next: Name Index,  Prev: GNU Free Documentation License,  Up: Top
+
+Index of Concepts
+*****************
+
+
+* Menu:
+
+* !=:                                    Setting.             (line   6)
+* !=, expansion:                         Reading Makefiles.   (line  33)
+* '#' (comments), in makefile:           Makefile Contents.   (line  41)
+* '#' (comments), in recipes:            Recipe Syntax.       (line  29)
+* '#include':                            Automatic Prerequisites.
+                                                              (line  16)
+* '$', in function call:                 Syntax of Functions. (line   6)
+* '$', in rules:                         Rule Syntax.         (line  33)
+* '$', in variable name:                 Computed Names.      (line   6)
+* '$', in variable reference:            Reference.           (line   6)
+* '%', in pattern rules:                 Pattern Intro.       (line   9)
+* '%', quoting in 'patsubst':            Text Functions.      (line  26)
+* '%', quoting in static pattern:        Static Usage.        (line  37)
+* '%', quoting in 'vpath':               Selective Search.    (line  39)
+* '%', quoting with '\' (backslash):     Selective Search.    (line  39)
+* '%', quoting with '\' (backslash) <1>: Static Usage.        (line  37)
+* '%', quoting with '\' (backslash) <2>: Text Functions.      (line  26)
+* '*' (wildcard character):              Wildcards.           (line   6)
+* +, and 'define':                       Canned Recipes.      (line  49)
+* +, and recipe execution:               Instead of Execution.
+                                                              (line  67)
+* +, and recipes:                        MAKE Variable.       (line  18)
+* +=:                                    Appending.           (line   6)
+* +=, expansion:                         Reading Makefiles.   (line  33)
+* +=, expansion <1>:                     Reading Makefiles.   (line  33)
+* ,v (RCS file extension):               Catalogue of Rules.  (line 163)
+* '-' (in recipes):                      Errors.              (line  19)
+* -, and 'define':                       Canned Recipes.      (line  49)
+* '--always-make':                       Options Summary.     (line  15)
+* '--assume-new':                        Instead of Execution.
+                                                              (line  41)
+* '--assume-new' <1>:                    Options Summary.     (line 284)
+* '--assume-new', and recursion:         Options/Recursion.   (line  22)
+* '--assume-old':                        Avoiding Compilation.
+                                                              (line   6)
+* '--assume-old' <1>:                    Options Summary.     (line 163)
+* '--assume-old', and recursion:         Options/Recursion.   (line  22)
+* '--check-symlink-times':               Options Summary.     (line 144)
+* '--debug':                             Options Summary.     (line  43)
+* '--directory':                         Recursion.           (line  20)
+* '--directory' <1>:                     Options Summary.     (line  26)
+* '--directory', and '--print-directory': -w Option.          (line  20)
+* '--directory', and recursion:          Options/Recursion.   (line  22)
+* '--dry-run':                           Echoing.             (line  18)
+* '--dry-run' <1>:                       Instead of Execution.
+                                                              (line  14)
+* '--dry-run' <2>:                       Options Summary.     (line 154)
+* '--environment-overrides':             Options Summary.     (line  85)
+* '--eval':                              Options Summary.     (line  89)
+* '--file':                              Makefile Names.      (line  23)
+* '--file' <1>:                          Makefile Arguments.  (line   6)
+* '--file' <2>:                          Options Summary.     (line  97)
+* '--file', and recursion:               Options/Recursion.   (line  22)
+* '--help':                              Options Summary.     (line 103)
+* '--ignore-errors':                     Errors.              (line  30)
+* '--ignore-errors' <1>:                 Options Summary.     (line 108)
+* '--include-dir':                       Include.             (line  53)
+* '--include-dir' <1>:                   Options Summary.     (line 113)
+* '--jobs':                              Parallel.            (line   6)
+* '--jobs' <1>:                          Options Summary.     (line 120)
+* '--jobs', and recursion:               Options/Recursion.   (line  25)
+* '--just-print':                        Echoing.             (line  18)
+* '--just-print' <1>:                    Instead of Execution.
+                                                              (line  14)
+* '--just-print' <2>:                    Options Summary.     (line 153)
+* '--keep-going':                        Errors.              (line  47)
+* '--keep-going' <1>:                    Testing.             (line  16)
+* '--keep-going' <2>:                    Options Summary.     (line 129)
+* '--load-average':                      Parallel.            (line  35)
+* '--load-average' <1>:                  Options Summary.     (line 136)
+* '--makefile':                          Makefile Names.      (line  23)
+* '--makefile' <1>:                      Makefile Arguments.  (line   6)
+* '--makefile' <2>:                      Options Summary.     (line  98)
+* '--max-load':                          Parallel.            (line  35)
+* '--max-load' <1>:                      Options Summary.     (line 137)
+* '--new-file':                          Instead of Execution.
+                                                              (line  41)
+* '--new-file' <1>:                      Options Summary.     (line 283)
+* '--new-file', and recursion:           Options/Recursion.   (line  22)
+* '--no-builtin-rules':                  Options Summary.     (line 209)
+* '--no-builtin-variables':              Options Summary.     (line 222)
+* '--no-keep-going':                     Options Summary.     (line 238)
+* '--no-print-directory':                -w Option.           (line  20)
+* '--no-print-directory' <1>:            Options Summary.     (line 275)
+* '--old-file':                          Avoiding Compilation.
+                                                              (line   6)
+* '--old-file' <1>:                      Options Summary.     (line 162)
+* '--old-file', and recursion:           Options/Recursion.   (line  22)
+* '--output-sync':                       Parallel Output.     (line  11)
+* '--output-sync' <1>:                   Options Summary.     (line 171)
+* '--print-data-base':                   Options Summary.     (line 187)
+* '--print-directory':                   Options Summary.     (line 267)
+* '--print-directory', and '--directory': -w Option.          (line  20)
+* '--print-directory', and recursion:    -w Option.           (line  20)
+* '--print-directory', disabling:        -w Option.           (line  20)
+* '--question':                          Instead of Execution.
+                                                              (line  32)
+* '--question' <1>:                      Options Summary.     (line 201)
+* '--quiet':                             Echoing.             (line  24)
+* '--quiet' <1>:                         Options Summary.     (line 232)
+* '--recon':                             Echoing.             (line  18)
+* '--recon' <1>:                         Instead of Execution.
+                                                              (line  14)
+* '--recon' <2>:                         Options Summary.     (line 155)
+* '--silent':                            Echoing.             (line  24)
+* '--silent' <1>:                        Options Summary.     (line 231)
+* '--stop':                              Options Summary.     (line 239)
+* '--touch':                             Instead of Execution.
+                                                              (line  24)
+* '--touch' <1>:                         Options Summary.     (line 247)
+* '--touch', and recursion:              MAKE Variable.       (line  35)
+* '--trace':                             Options Summary.     (line 254)
+* '--version':                           Options Summary.     (line 262)
+* '--warn-undefined-variables':          Options Summary.     (line 292)
+* '--what-if':                           Instead of Execution.
+                                                              (line  41)
+* '--what-if' <1>:                       Options Summary.     (line 282)
+* '-b':                                  Options Summary.     (line   9)
+* '-B':                                  Options Summary.     (line  14)
+* '-C':                                  Recursion.           (line  20)
+* '-C' <1>:                              Options Summary.     (line  25)
+* '-C', and '-w':                        -w Option.           (line  20)
+* '-C', and recursion:                   Options/Recursion.   (line  22)
+* '-d':                                  Options Summary.     (line  33)
+* '-e':                                  Options Summary.     (line  84)
+* '-e' (shell flag):                     Automatic Prerequisites.
+                                                              (line  65)
+* '-f':                                  Makefile Names.      (line  23)
+* '-f' <1>:                              Makefile Arguments.  (line   6)
+* '-f' <2>:                              Options Summary.     (line  96)
+* '-f', and recursion:                   Options/Recursion.   (line  22)
+* '-h':                                  Options Summary.     (line 102)
+* '-I':                                  Include.             (line  53)
+* '-i':                                  Errors.              (line  30)
+* '-i' <1>:                              Options Summary.     (line 107)
+* '-I' <1>:                              Options Summary.     (line 112)
+* '-j':                                  Parallel.            (line   6)
+* '-j' <1>:                              Options Summary.     (line 119)
+* '-j', and archive update:              Archive Pitfalls.    (line   6)
+* '-j', and recursion:                   Options/Recursion.   (line  25)
+* '-k':                                  Errors.              (line  47)
+* '-k' <1>:                              Testing.             (line  16)
+* '-k' <2>:                              Options Summary.     (line 128)
+* '-l':                                  Options Summary.     (line 135)
+* '-L':                                  Options Summary.     (line 143)
+* '-l' (library search):                 Libraries/Search.    (line   6)
+* '-l' (load average):                   Parallel.            (line  35)
+* '-m':                                  Options Summary.     (line  10)
+* '-M' (to compiler):                    Automatic Prerequisites.
+                                                              (line  18)
+* '-MM' (to GNU compiler):               Automatic Prerequisites.
+                                                              (line  67)
+* '-n':                                  Echoing.             (line  18)
+* '-n' <1>:                              Instead of Execution.
+                                                              (line  14)
+* '-n' <2>:                              Options Summary.     (line 152)
+* '-O':                                  Parallel Output.     (line  11)
+* '-o':                                  Avoiding Compilation.
+                                                              (line   6)
+* '-o' <1>:                              Options Summary.     (line 161)
+* '-O' <1>:                              Options Summary.     (line 170)
+* '-o', and recursion:                   Options/Recursion.   (line  22)
+* '-p':                                  Options Summary.     (line 186)
+* '-q':                                  Instead of Execution.
+                                                              (line  32)
+* '-q' <1>:                              Options Summary.     (line 200)
+* '-r':                                  Options Summary.     (line 208)
+* '-R':                                  Options Summary.     (line 221)
+* '-s':                                  Echoing.             (line  24)
+* '-s' <1>:                              Options Summary.     (line 230)
+* '-S':                                  Options Summary.     (line 237)
+* '-t':                                  Instead of Execution.
+                                                              (line  24)
+* '-t' <1>:                              Options Summary.     (line 246)
+* '-t', and recursion:                   MAKE Variable.       (line  35)
+* '-v':                                  Options Summary.     (line 261)
+* '-W':                                  Instead of Execution.
+                                                              (line  41)
+* '-w':                                  Options Summary.     (line 266)
+* '-W' <1>:                              Options Summary.     (line 281)
+* '-w', and '-C':                        -w Option.           (line  20)
+* '-W', and recursion:                   Options/Recursion.   (line  22)
+* '-w', and recursion:                   -w Option.           (line  20)
+* '-w', disabling:                       -w Option.           (line  20)
+* '.a' (archives):                       Archive Suffix Rules.
+                                                              (line   6)
+* .c:                                    Catalogue of Rules.  (line  35)
+* .C:                                    Catalogue of Rules.  (line  39)
+* .cc:                                   Catalogue of Rules.  (line  39)
+* .ch:                                   Catalogue of Rules.  (line 149)
+* .cpp:                                  Catalogue of Rules.  (line  39)
+* '.d':                                  Automatic Prerequisites.
+                                                              (line  80)
+* .def:                                  Catalogue of Rules.  (line  71)
+* .dvi:                                  Catalogue of Rules.  (line 149)
+* .f:                                    Catalogue of Rules.  (line  49)
+* .F:                                    Catalogue of Rules.  (line  49)
+* .info:                                 Catalogue of Rules.  (line 156)
+* .l:                                    Catalogue of Rules.  (line 121)
+* '.LIBPATTERNS', and link libraries:    Libraries/Search.    (line   6)
+* .ln:                                   Catalogue of Rules.  (line 143)
+* .mod:                                  Catalogue of Rules.  (line  71)
+* .o:                                    Catalogue of Rules.  (line  35)
+* .o <1>:                                Catalogue of Rules.  (line  83)
+* '.ONESHELL', use of:                   One Shell.           (line   6)
+* .p:                                    Catalogue of Rules.  (line  45)
+* '.PRECIOUS' intermediate files:        Chained Rules.       (line  56)
+* .r:                                    Catalogue of Rules.  (line  49)
+* .s:                                    Catalogue of Rules.  (line  76)
+* .S:                                    Catalogue of Rules.  (line  79)
+* .sh:                                   Catalogue of Rules.  (line 178)
+* '.SHELLFLAGS', value of:               Choosing the Shell.  (line   6)
+* .sym:                                  Catalogue of Rules.  (line  71)
+* .tex:                                  Catalogue of Rules.  (line 149)
+* .texi:                                 Catalogue of Rules.  (line 156)
+* .texinfo:                              Catalogue of Rules.  (line 156)
+* .txinfo:                               Catalogue of Rules.  (line 156)
+* .w:                                    Catalogue of Rules.  (line 149)
+* .web:                                  Catalogue of Rules.  (line 149)
+* .y:                                    Catalogue of Rules.  (line 117)
+* '::' rules (double-colon):             Double-Colon.        (line   6)
+* ::=:                                   Flavors.             (line  56)
+* ::= <1>:                               Setting.             (line   6)
+* :=:                                    Flavors.             (line  56)
+* := <1>:                                Setting.             (line   6)
+* =:                                     Flavors.             (line  10)
+* = <1>:                                 Setting.             (line   6)
+* =, expansion:                          Reading Makefiles.   (line  33)
+* '?' (wildcard character):              Wildcards.           (line   6)
+* ?=:                                    Flavors.             (line 135)
+* ?= <1>:                                Setting.             (line   6)
+* ?=, expansion:                         Reading Makefiles.   (line  33)
+* '@' (in recipes):                      Echoing.             (line   6)
+* @, and 'define':                       Canned Recipes.      (line  49)
+* '[...]' (wildcard characters):         Wildcards.           (line   6)
+* '\' (backslash), for continuation lines: Simple Makefile.   (line  41)
+* '\' (backslash), in recipes:           Splitting Recipe Lines.
+                                                              (line   6)
+* '\' (backslash), to quote '%':         Selective Search.    (line  39)
+* '\' (backslash), to quote '%' <1>:     Static Usage.        (line  37)
+* '\' (backslash), to quote '%' <2>:     Text Functions.      (line  26)
+* '__.SYMDEF':                           Archive Symbols.     (line   6)
+* '~' (tilde):                           Wildcards.           (line  11)
+* abspath:                               File Name Functions. (line 120)
+* algorithm for directory search:        Search Algorithm.    (line   6)
+* 'all' (standard target):               Goals.               (line  73)
+* appending to variables:                Appending.           (line   6)
+* ar:                                    Implicit Variables.  (line  40)
+* archive:                               Archives.            (line   6)
+* archive member targets:                Archive Members.     (line   6)
+* archive symbol directory updating:     Archive Symbols.     (line   6)
+* archive, and '-j':                     Archive Pitfalls.    (line   6)
+* archive, and parallel execution:       Archive Pitfalls.    (line   6)
+* archive, suffix rule for:              Archive Suffix Rules.
+                                                              (line   6)
+* Arg list too long:                     Options/Recursion.   (line  58)
+* arguments of functions:                Syntax of Functions. (line   6)
+* as:                                    Catalogue of Rules.  (line  76)
+* as <1>:                                Implicit Variables.  (line  43)
+* assembly, rule to compile:             Catalogue of Rules.  (line  76)
+* automatic generation of prerequisites: Include.             (line  51)
+* automatic generation of prerequisites <1>: Automatic Prerequisites.
+                                                              (line   6)
+* automatic variables:                   Automatic Variables. (line   6)
+* automatic variables in prerequisites:  Automatic Variables. (line  17)
+* backquotes:                            Shell Function.      (line   6)
+* backslash ('\'), for continuation lines: Simple Makefile.   (line  41)
+* backslash ('\'), in recipes:           Splitting Recipe Lines.
+                                                              (line   6)
+* backslash ('\'), to quote '%':         Selective Search.    (line  39)
+* backslash ('\'), to quote '%' <1>:     Static Usage.        (line  37)
+* backslash ('\'), to quote '%' <2>:     Text Functions.      (line  26)
+* backslash ('\'), to quote newlines:    Splitting Lines.     (line   6)
+* backslashes in pathnames and wildcard expansion: Wildcard Pitfall.
+                                                              (line  31)
+* basename:                              File Name Functions. (line  56)
+* binary packages:                       Install Command Categories.
+                                                              (line  80)
+* broken pipe:                           Parallel Input.      (line  11)
+* bugs, reporting:                       Bugs.                (line   6)
+* built-in special targets:              Special Targets.     (line   6)
+* C++, rule to compile:                  Catalogue of Rules.  (line  39)
+* C, rule to compile:                    Catalogue of Rules.  (line  35)
+* canned recipes:                        Canned Recipes.      (line   6)
+* cc:                                    Catalogue of Rules.  (line  35)
+* cc <1>:                                Implicit Variables.  (line  46)
+* 'cd' (shell command):                  Execution.           (line  12)
+* 'cd' (shell command) <1>:              MAKE Variable.       (line  16)
+* chains of rules:                       Chained Rules.       (line   6)
+* 'check' (standard target):             Goals.               (line 115)
+* 'clean' (standard target):             Goals.               (line  76)
+* 'clean' target:                        Simple Makefile.     (line  85)
+* 'clean' target <1>:                    Cleanup.             (line  11)
+* cleaning up:                           Cleanup.             (line   6)
+* 'clobber' (standard target):           Goals.               (line  87)
+* co:                                    Catalogue of Rules.  (line 163)
+* co <1>:                                Implicit Variables.  (line  66)
+* combining rules by prerequisite:       Combine By Prerequisite.
+                                                              (line   6)
+* command expansion:                     Shell Function.      (line   6)
+* command line variable definitions, and recursion: Options/Recursion.
+                                                              (line  17)
+* command line variables:                Overriding.          (line   6)
+* commands, sequences of:                Canned Recipes.      (line   6)
+* comments, in makefile:                 Makefile Contents.   (line  41)
+* comments, in recipes:                  Recipe Syntax.       (line  29)
+* compatibility:                         Features.            (line   6)
+* compatibility in exporting:            Variables/Recursion. (line 104)
+* compilation, testing:                  Testing.             (line   6)
+* computed variable name:                Computed Names.      (line   6)
+* conditional expansion:                 Conditional Functions.
+                                                              (line   6)
+* conditional variable assignment:       Flavors.             (line 135)
+* conditionals:                          Conditionals.        (line   6)
+* continuation lines:                    Simple Makefile.     (line  41)
+* controlling make:                      Make Control Functions.
+                                                              (line   6)
+* conventions for makefiles:             Makefile Conventions.
+                                                              (line   6)
+* convert guile types:                   Guile Types.         (line   6)
+* ctangle:                               Catalogue of Rules.  (line 149)
+* ctangle <1>:                           Implicit Variables.  (line 103)
+* cweave:                                Catalogue of Rules.  (line 149)
+* cweave <1>:                            Implicit Variables.  (line  97)
+* data base of 'make' rules:             Options Summary.     (line 187)
+* deducing recipes (implicit rules):     make Deduces.        (line   6)
+* default directories for included makefiles: Include.        (line  53)
+* default goal:                          How Make Works.      (line  11)
+* default goal <1>:                      Rules.               (line  11)
+* default makefile name:                 Makefile Names.      (line   6)
+* default rules, last-resort:            Last Resort.         (line   6)
+* define, expansion:                     Reading Makefiles.   (line  33)
+* defining variables verbatim:           Multi-Line.          (line   6)
+* deletion of target files:              Errors.              (line  64)
+* deletion of target files <1>:          Interrupts.          (line   6)
+* directive:                             Makefile Contents.   (line  28)
+* directories, creating installation:    Directory Variables. (line  20)
+* directories, printing them:            -w Option.           (line   6)
+* directories, updating archive symbol:  Archive Symbols.     (line   6)
+* directory part:                        File Name Functions. (line  16)
+* directory search ('VPATH'):            Directory Search.    (line   6)
+* directory search ('VPATH'), and implicit rules: Implicit/Search.
+                                                              (line   6)
+* directory search ('VPATH'), and link libraries: Libraries/Search.
+                                                              (line   6)
+* directory search ('VPATH'), and recipes: Recipes/Search.    (line   6)
+* directory search algorithm:            Search Algorithm.    (line   6)
+* directory search, traditional (GPATH): Search Algorithm.    (line  42)
+* 'dist' (standard target):              Goals.               (line 107)
+* 'distclean' (standard target):         Goals.               (line  85)
+* dollar sign ('$'), in function call:   Syntax of Functions. (line   6)
+* dollar sign ('$'), in rules:           Rule Syntax.         (line  33)
+* dollar sign ('$'), in variable name:   Computed Names.      (line   6)
+* dollar sign ('$'), in variable reference: Reference.        (line   6)
+* DOS, choosing a shell in:              Choosing the Shell.  (line  38)
+* double-colon rules:                    Double-Colon.        (line   6)
+* duplicate words, removing:             Text Functions.      (line 155)
+* E2BIG:                                 Options/Recursion.   (line  58)
+* echoing of recipes:                    Echoing.             (line   6)
+* editor:                                Introduction.        (line  22)
+* Emacs ('M-x compile'):                 Errors.              (line  62)
+* empty recipes:                         Empty Recipes.       (line   6)
+* empty targets:                         Empty Targets.       (line   6)
+* environment:                           Environment.         (line   6)
+* environment, and recursion:            Variables/Recursion. (line   6)
+* environment, 'SHELL' in:               Choosing the Shell.  (line  12)
+* error, stopping on:                    Make Control Functions.
+                                                              (line  11)
+* errors (in recipes):                   Errors.              (line   6)
+* errors with wildcards:                 Wildcard Pitfall.    (line   6)
+* evaluating makefile syntax:            Eval Function.       (line   6)
+* example of loaded objects:             Loaded Object Example.
+                                                              (line   6)
+* example using Guile:                   Guile Example.       (line   6)
+* execution, in parallel:                Parallel.            (line   6)
+* execution, instead of:                 Instead of Execution.
+                                                              (line   6)
+* execution, of recipes:                 Execution.           (line   6)
+* exit status (errors):                  Errors.              (line   6)
+* exit status of make:                   Running.             (line  18)
+* expansion, secondary:                  Secondary Expansion. (line   6)
+* explicit rule, definition of:          Makefile Contents.   (line  10)
+* explicit rule, expansion:              Reading Makefiles.   (line  92)
+* explicit rules, secondary expansion of: Secondary Expansion.
+                                                              (line 104)
+* exporting variables:                   Variables/Recursion. (line   6)
+* extensions, Guile:                     Guile Integration.   (line   6)
+* extensions, load directive:            load Directive.      (line   6)
+* extensions, loading:                   Loading Objects.     (line   6)
+* f77:                                   Catalogue of Rules.  (line  49)
+* f77 <1>:                               Implicit Variables.  (line  57)
+* FDL, GNU Free Documentation License:   GNU Free Documentation License.
+                                                              (line   6)
+* features of GNU 'make':                Features.            (line   6)
+* features, missing:                     Missing.             (line   6)
+* file name functions:                   File Name Functions. (line   6)
+* file name of makefile:                 Makefile Names.      (line   6)
+* file name of makefile, how to specify: Makefile Names.      (line  31)
+* file name prefix, adding:              File Name Functions. (line  78)
+* file name suffix:                      File Name Functions. (line  42)
+* file name suffix, adding:              File Name Functions. (line  67)
+* file name with wildcards:              Wildcards.           (line   6)
+* file name, abspath of:                 File Name Functions. (line 120)
+* file name, basename of:                File Name Functions. (line  56)
+* file name, directory part:             File Name Functions. (line  16)
+* file name, nondirectory part:          File Name Functions. (line  26)
+* file name, realpath of:                File Name Functions. (line 113)
+* file, writing to:                      File Function.       (line   6)
+* files, assuming new:                   Instead of Execution.
+                                                              (line  41)
+* files, assuming old:                   Avoiding Compilation.
+                                                              (line   6)
+* files, avoiding recompilation of:      Avoiding Compilation.
+                                                              (line   6)
+* files, intermediate:                   Chained Rules.       (line  16)
+* filtering out words:                   Text Functions.      (line 133)
+* filtering words:                       Text Functions.      (line 115)
+* finding strings:                       Text Functions.      (line 104)
+* flags:                                 Options Summary.     (line   6)
+* flags for compilers:                   Implicit Variables.  (line   6)
+* flavor of variable:                    Flavor Function.     (line   6)
+* flavors of variables:                  Flavors.             (line   6)
+* 'FORCE':                               Force Targets.       (line   6)
+* force targets:                         Force Targets.       (line   6)
+* Fortran, rule to compile:              Catalogue of Rules.  (line  49)
+* functions:                             Functions.           (line   6)
+* functions, for controlling make:       Make Control Functions.
+                                                              (line   6)
+* functions, for file names:             File Name Functions. (line   6)
+* functions, for text:                   Text Functions.      (line   6)
+* functions, syntax of:                  Syntax of Functions. (line   6)
+* functions, user defined:               Call Function.       (line   6)
+* g++:                                   Catalogue of Rules.  (line  39)
+* g++ <1>:                               Implicit Variables.  (line  49)
+* gcc:                                   Catalogue of Rules.  (line  35)
+* generating prerequisites automatically: Include.            (line  51)
+* generating prerequisites automatically <1>: Automatic Prerequisites.
+                                                              (line   6)
+* get:                                   Catalogue of Rules.  (line 172)
+* get <1>:                               Implicit Variables.  (line  69)
+* globbing (wildcards):                  Wildcards.           (line   6)
+* goal:                                  How Make Works.      (line  11)
+* goal, default:                         How Make Works.      (line  11)
+* goal, default <1>:                     Rules.               (line  11)
+* goal, how to specify:                  Goals.               (line   6)
+* Guile:                                 Guile Function.      (line   6)
+* Guile <1>:                             Guile Integration.   (line   6)
+* Guile example:                         Guile Example.       (line   6)
+* guile, conversion of types:            Guile Types.         (line   6)
+* home directory:                        Wildcards.           (line  11)
+* IEEE Standard 1003.2:                  Overview.            (line  13)
+* ifdef, expansion:                      Reading Makefiles.   (line  82)
+* ifeq, expansion:                       Reading Makefiles.   (line  82)
+* ifndef, expansion:                     Reading Makefiles.   (line  82)
+* ifneq, expansion:                      Reading Makefiles.   (line  82)
+* implicit rule:                         Implicit Rules.      (line   6)
+* implicit rule, and directory search:   Implicit/Search.     (line   6)
+* implicit rule, and 'VPATH':            Implicit/Search.     (line   6)
+* implicit rule, definition of:          Makefile Contents.   (line  16)
+* implicit rule, expansion:              Reading Makefiles.   (line  92)
+* implicit rule, how to use:             Using Implicit.      (line   6)
+* implicit rule, introduction to:        make Deduces.        (line   6)
+* implicit rule, predefined:             Catalogue of Rules.  (line   6)
+* implicit rule, search algorithm:       Implicit Rule Search.
+                                                              (line   6)
+* implicit rules, secondary expansion of: Secondary Expansion.
+                                                              (line 144)
+* included makefiles, default directories: Include.           (line  53)
+* including ('MAKEFILES' variable):      MAKEFILES Variable.  (line   6)
+* including ('MAKEFILE_LIST' variable):  Special Variables.   (line   8)
+* including other makefiles:             Include.             (line   6)
+* incompatibilities:                     Missing.             (line   6)
+* Info, rule to format:                  Catalogue of Rules.  (line 156)
+* inheritance, suppressing:              Suppressing Inheritance.
+                                                              (line   6)
+* input during parallel execution:       Parallel Input.      (line   6)
+* 'install' (standard target):           Goals.               (line  93)
+* installation directories, creating:    Directory Variables. (line  20)
+* installations, staged:                 DESTDIR.             (line   6)
+* interface for loaded objects:          Loaded Object API.   (line   6)
+* intermediate files:                    Chained Rules.       (line  16)
+* intermediate files, preserving:        Chained Rules.       (line  46)
+* intermediate targets, explicit:        Special Targets.     (line  48)
+* interrupt:                             Interrupts.          (line   6)
+* job slots:                             Parallel.            (line   6)
+* job slots, and recursion:              Options/Recursion.   (line  25)
+* jobs, limiting based on load:          Parallel.            (line  35)
+* joining lists of words:                File Name Functions. (line  89)
+* killing (interruption):                Interrupts.          (line   6)
+* last-resort default rules:             Last Resort.         (line   6)
+* ld:                                    Catalogue of Rules.  (line  83)
+* lex:                                   Catalogue of Rules.  (line 121)
+* lex <1>:                               Implicit Variables.  (line  73)
+* Lex, rule to run:                      Catalogue of Rules.  (line 121)
+* libraries for linking, directory search: Libraries/Search.  (line   6)
+* library archive, suffix rule for:      Archive Suffix Rules.
+                                                              (line   6)
+* limiting jobs based on load:           Parallel.            (line  35)
+* link libraries, and directory search:  Libraries/Search.    (line   6)
+* link libraries, patterns matching:     Libraries/Search.    (line   6)
+* linking, predefined rule for:          Catalogue of Rules.  (line  83)
+* lint:                                  Catalogue of Rules.  (line 143)
+* lint <1>:                              Implicit Variables.  (line  80)
+* 'lint', rule to run:                   Catalogue of Rules.  (line 143)
+* list of all prerequisites:             Automatic Variables. (line  61)
+* list of changed prerequisites:         Automatic Variables. (line  51)
+* load average:                          Parallel.            (line  35)
+* load directive:                        load Directive.      (line   6)
+* loaded object API:                     Loaded Object API.   (line   6)
+* loaded object example:                 Loaded Object Example.
+                                                              (line   6)
+* loaded object licensing:               Loaded Object API.   (line  31)
+* loaded objects:                        Loading Objects.     (line   6)
+* loaded objects, remaking of:           Remaking Loaded Objects.
+                                                              (line   6)
+* long lines, splitting:                 Splitting Lines.     (line   6)
+* loops in variable expansion:           Flavors.             (line  44)
+* 'lpr' (shell command):                 Wildcard Examples.   (line  21)
+* 'lpr' (shell command) <1>:             Empty Targets.       (line  25)
+* m2c:                                   Catalogue of Rules.  (line  71)
+* m2c <1>:                               Implicit Variables.  (line  60)
+* macro:                                 Using Variables.     (line  10)
+* 'make depend':                         Automatic Prerequisites.
+                                                              (line  37)
+* make extensions:                       Extending make.      (line   6)
+* make interface to guile:               Guile Interface.     (line   6)
+* make procedures in guile:              Guile Interface.     (line   6)
+* makefile:                              Introduction.        (line   7)
+* makefile name:                         Makefile Names.      (line   6)
+* makefile name, how to specify:         Makefile Names.      (line  31)
+* makefile rule parts:                   Rule Introduction.   (line   6)
+* makefile syntax, evaluating:           Eval Function.       (line   6)
+* makefile, and 'MAKEFILES' variable:    MAKEFILES Variable.  (line   6)
+* makefile, conventions for:             Makefile Conventions.
+                                                              (line   6)
+* makefile, how 'make' processes:        How Make Works.      (line   6)
+* makefile, how to write:                Makefiles.           (line   6)
+* makefile, including:                   Include.             (line   6)
+* makefile, overriding:                  Overriding Makefiles.
+                                                              (line   6)
+* makefile, parsing:                     Reading Makefiles.   (line   6)
+* makefile, remaking of:                 Remaking Makefiles.  (line   6)
+* makefile, simple:                      Simple Makefile.     (line   6)
+* makefiles, and 'MAKEFILE_LIST' variable: Special Variables. (line   8)
+* makefiles, and special variables:      Special Variables.   (line   6)
+* makeinfo:                              Catalogue of Rules.  (line 156)
+* makeinfo <1>:                          Implicit Variables.  (line  84)
+* match-anything rule:                   Match-Anything Rules.
+                                                              (line   6)
+* match-anything rule, used to override: Overriding Makefiles.
+                                                              (line  12)
+* missing features:                      Missing.             (line   6)
+* mistakes with wildcards:               Wildcard Pitfall.    (line   6)
+* modified variable reference:           Substitution Refs.   (line   6)
+* Modula-2, rule to compile:             Catalogue of Rules.  (line  71)
+* 'mostlyclean' (standard target):       Goals.               (line  79)
+* multi-line variable definition:        Multi-Line.          (line   6)
+* multiple rules for one target:         Multiple Rules.      (line   6)
+* multiple rules for one target ('::'):  Double-Colon.        (line   6)
+* multiple targets:                      Multiple Targets.    (line   6)
+* multiple targets, in pattern rule:     Pattern Intro.       (line  53)
+* name of makefile:                      Makefile Names.      (line   6)
+* name of makefile, how to specify:      Makefile Names.      (line  31)
+* nested variable reference:             Computed Names.      (line   6)
+* newline, quoting, in makefile:         Simple Makefile.     (line  41)
+* newline, quoting, in recipes:          Splitting Recipe Lines.
+                                                              (line   6)
+* nondirectory part:                     File Name Functions. (line  26)
+* normal prerequisites:                  Prerequisite Types.  (line   6)
+* 'obj':                                 Variables Simplify.  (line  20)
+* 'OBJ':                                 Variables Simplify.  (line  20)
+* 'objects':                             Variables Simplify.  (line  14)
+* 'OBJECTS':                             Variables Simplify.  (line  20)
+* objects, loaded:                       Loading Objects.     (line   6)
+* 'objs':                                Variables Simplify.  (line  20)
+* 'OBJS':                                Variables Simplify.  (line  20)
+* old-fashioned suffix rules:            Suffix Rules.        (line   6)
+* options:                               Options Summary.     (line   6)
+* options, and recursion:                Options/Recursion.   (line   6)
+* options, setting from environment:     Options/Recursion.   (line  81)
+* options, setting in makefiles:         Options/Recursion.   (line  81)
+* order of pattern rules:                Pattern Match.       (line  30)
+* order-only prerequisites:              Prerequisite Types.  (line   6)
+* origin of variable:                    Origin Function.     (line   6)
+* output during parallel execution:      Parallel Output.     (line   6)
+* output during parallel execution <1>:  Options Summary.     (line 171)
+* overriding makefiles:                  Overriding Makefiles.
+                                                              (line   6)
+* overriding variables with arguments:   Overriding.          (line   6)
+* overriding with 'override':            Override Directive.  (line   6)
+* parallel execution:                    Parallel.            (line   6)
+* parallel execution, and archive update: Archive Pitfalls.   (line   6)
+* parallel execution, input during:      Parallel Input.      (line   6)
+* parallel execution, output during:     Parallel Output.     (line   6)
+* parallel execution, output during <1>: Options Summary.     (line 171)
+* parallel execution, overriding:        Special Targets.     (line 142)
+* parts of makefile rule:                Rule Introduction.   (line   6)
+* Pascal, rule to compile:               Catalogue of Rules.  (line  45)
+* pattern rule:                          Pattern Intro.       (line   6)
+* pattern rule, expansion:               Reading Makefiles.   (line  92)
+* pattern rules, order of:               Pattern Match.       (line  30)
+* pattern rules, static (not implicit):  Static Pattern.      (line   6)
+* pattern rules, static, syntax of:      Static Usage.        (line   6)
+* pattern-specific variables:            Pattern-specific.    (line   6)
+* pc:                                    Catalogue of Rules.  (line  45)
+* pc <1>:                                Implicit Variables.  (line  63)
+* phony targets:                         Phony Targets.       (line   6)
+* phony targets and recipe execution:    Instead of Execution.
+                                                              (line  75)
+* pitfalls of wildcards:                 Wildcard Pitfall.    (line   6)
+* plugin_is_GPL_compatible:              Loaded Object API.   (line  31)
+* portability:                           Features.            (line   6)
+* POSIX:                                 Overview.            (line  13)
+* POSIX <1>:                             Options/Recursion.   (line  61)
+* POSIX-conforming mode, setting:        Special Targets.     (line 157)
+* post-installation commands:            Install Command Categories.
+                                                              (line   6)
+* pre-installation commands:             Install Command Categories.
+                                                              (line   6)
+* precious targets:                      Special Targets.     (line  32)
+* predefined rules and variables, printing: Options Summary.  (line 187)
+* prefix, adding:                        File Name Functions. (line  78)
+* prerequisite:                          Rules.               (line   6)
+* prerequisite pattern, implicit:        Pattern Intro.       (line  22)
+* prerequisite pattern, static (not implicit): Static Usage.  (line  30)
+* prerequisite types:                    Prerequisite Types.  (line   6)
+* prerequisite, expansion:               Reading Makefiles.   (line  92)
+* prerequisites:                         Rule Syntax.         (line  47)
+* prerequisites, and automatic variables: Automatic Variables.
+                                                              (line  17)
+* prerequisites, automatic generation:   Include.             (line  51)
+* prerequisites, automatic generation <1>: Automatic Prerequisites.
+                                                              (line   6)
+* prerequisites, introduction to:        Rule Introduction.   (line   8)
+* prerequisites, list of all:            Automatic Variables. (line  61)
+* prerequisites, list of changed:        Automatic Variables. (line  51)
+* prerequisites, normal:                 Prerequisite Types.  (line   6)
+* prerequisites, order-only:             Prerequisite Types.  (line   6)
+* prerequisites, varying (static pattern): Static Pattern.    (line   6)
+* preserving intermediate files:         Chained Rules.       (line  46)
+* preserving with '.PRECIOUS':           Special Targets.     (line  32)
+* preserving with '.PRECIOUS' <1>:       Chained Rules.       (line  56)
+* preserving with '.SECONDARY':          Special Targets.     (line  54)
+* 'print' (standard target):             Goals.               (line  98)
+* 'print' target:                        Wildcard Examples.   (line  21)
+* 'print' target <1>:                    Empty Targets.       (line  25)
+* printing directories:                  -w Option.           (line   6)
+* printing messages:                     Make Control Functions.
+                                                              (line  43)
+* printing of recipes:                   Echoing.             (line   6)
+* printing user warnings:                Make Control Functions.
+                                                              (line  35)
+* problems and bugs, reporting:          Bugs.                (line   6)
+* problems with wildcards:               Wildcard Pitfall.    (line   6)
+* processing a makefile:                 How Make Works.      (line   6)
+* question mode:                         Instead of Execution.
+                                                              (line  32)
+* quoting '%', in 'patsubst':            Text Functions.      (line  26)
+* quoting '%', in static pattern:        Static Usage.        (line  37)
+* quoting '%', in 'vpath':               Selective Search.    (line  39)
+* quoting newline, in makefile:          Simple Makefile.     (line  41)
+* quoting newline, in recipes:           Splitting Recipe Lines.
+                                                              (line   6)
+* Ratfor, rule to compile:               Catalogue of Rules.  (line  49)
+* RCS, rule to extract from:             Catalogue of Rules.  (line 163)
+* reading makefiles:                     Reading Makefiles.   (line   6)
+* 'README':                              Makefile Names.      (line   9)
+* 'realclean' (standard target):         Goals.               (line  86)
+* realpath:                              File Name Functions. (line 113)
+* recipe:                                Simple Makefile.     (line  74)
+* recipe execution, single invocation:   Special Targets.     (line 150)
+* recipe lines, single shell:            One Shell.           (line   6)
+* recipe syntax:                         Recipe Syntax.       (line   6)
+* recipe, execution:                     Execution.           (line   6)
+* recipes:                               Rule Syntax.         (line  25)
+* recipes <1>:                           Recipes.             (line   6)
+* recipes setting shell variables:       Execution.           (line  12)
+* recipes, and directory search:         Recipes/Search.      (line   6)
+* recipes, backslash ('\') in:           Splitting Recipe Lines.
+                                                              (line   6)
+* recipes, canned:                       Canned Recipes.      (line   6)
+* recipes, comments in:                  Recipe Syntax.       (line  29)
+* recipes, echoing:                      Echoing.             (line   6)
+* recipes, empty:                        Empty Recipes.       (line   6)
+* recipes, errors in:                    Errors.              (line   6)
+* recipes, execution in parallel:        Parallel.            (line   6)
+* recipes, how to write:                 Recipes.             (line   6)
+* recipes, instead of executing:         Instead of Execution.
+                                                              (line   6)
+* recipes, introduction to:              Rule Introduction.   (line   8)
+* recipes, quoting newlines in:          Splitting Recipe Lines.
+                                                              (line   6)
+* recipes, splitting:                    Splitting Recipe Lines.
+                                                              (line   6)
+* recipes, using variables in:           Variables in Recipes.
+                                                              (line   6)
+* recompilation:                         Introduction.        (line  22)
+* recompilation, avoiding:               Avoiding Compilation.
+                                                              (line   6)
+* recording events with empty targets:   Empty Targets.       (line   6)
+* recursion:                             Recursion.           (line   6)
+* recursion, and '-C':                   Options/Recursion.   (line  22)
+* recursion, and '-f':                   Options/Recursion.   (line  22)
+* recursion, and '-j':                   Options/Recursion.   (line  25)
+* recursion, and '-o':                   Options/Recursion.   (line  22)
+* recursion, and '-t':                   MAKE Variable.       (line  35)
+* recursion, and '-W':                   Options/Recursion.   (line  22)
+* recursion, and '-w':                   -w Option.           (line  20)
+* recursion, and command line variable definitions: Options/Recursion.
+                                                              (line  17)
+* recursion, and environment:            Variables/Recursion. (line   6)
+* recursion, and 'MAKE' variable:        MAKE Variable.       (line   6)
+* recursion, and 'MAKEFILES' variable:   MAKEFILES Variable.  (line  15)
+* recursion, and options:                Options/Recursion.   (line   6)
+* recursion, and printing directories:   -w Option.           (line   6)
+* recursion, and variables:              Variables/Recursion. (line   6)
+* recursion, level of:                   Variables/Recursion. (line 114)
+* recursive variable expansion:          Using Variables.     (line   6)
+* recursive variable expansion <1>:      Flavors.             (line   6)
+* recursively expanded variables:        Flavors.             (line   6)
+* reference to variables:                Reference.           (line   6)
+* reference to variables <1>:            Advanced.            (line   6)
+* relinking:                             How Make Works.      (line  46)
+* remaking loaded objects:               Remaking Loaded Objects.
+                                                              (line   6)
+* remaking makefiles:                    Remaking Makefiles.  (line   6)
+* removal of target files:               Errors.              (line  64)
+* removal of target files <1>:           Interrupts.          (line   6)
+* removing duplicate words:              Text Functions.      (line 155)
+* removing targets on failure:           Special Targets.     (line  71)
+* removing, to clean up:                 Cleanup.             (line   6)
+* reporting bugs:                        Bugs.                (line   6)
+* rm:                                    Implicit Variables.  (line 106)
+* 'rm' (shell command):                  Simple Makefile.     (line  85)
+* 'rm' (shell command) <1>:              Wildcard Examples.   (line  12)
+* 'rm' (shell command) <2>:              Phony Targets.       (line  20)
+* 'rm' (shell command) <3>:              Errors.              (line  27)
+* rule prerequisites:                    Rule Syntax.         (line  47)
+* rule syntax:                           Rule Syntax.         (line   6)
+* rule targets:                          Rule Syntax.         (line  18)
+* rule, double-colon ('::'):             Double-Colon.        (line   6)
+* rule, explicit, definition of:         Makefile Contents.   (line  10)
+* rule, how to write:                    Rules.               (line   6)
+* rule, implicit:                        Implicit Rules.      (line   6)
+* rule, implicit, and directory search:  Implicit/Search.     (line   6)
+* rule, implicit, and 'VPATH':           Implicit/Search.     (line   6)
+* rule, implicit, chains of:             Chained Rules.       (line   6)
+* rule, implicit, definition of:         Makefile Contents.   (line  16)
+* rule, implicit, how to use:            Using Implicit.      (line   6)
+* rule, implicit, introduction to:       make Deduces.        (line   6)
+* rule, implicit, predefined:            Catalogue of Rules.  (line   6)
+* rule, introduction to:                 Rule Introduction.   (line   6)
+* rule, multiple for one target:         Multiple Rules.      (line   6)
+* rule, no recipe or prerequisites:      Force Targets.       (line   6)
+* rule, pattern:                         Pattern Intro.       (line   6)
+* rule, static pattern:                  Static Pattern.      (line   6)
+* rule, static pattern versus implicit:  Static versus Implicit.
+                                                              (line   6)
+* rule, with multiple targets:           Multiple Targets.    (line   6)
+* rules, and '$':                        Rule Syntax.         (line  33)
+* s. (SCCS file prefix):                 Catalogue of Rules.  (line 172)
+* SCCS, rule to extract from:            Catalogue of Rules.  (line 172)
+* search algorithm, implicit rule:       Implicit Rule Search.
+                                                              (line   6)
+* search path for prerequisites ('VPATH'): Directory Search.  (line   6)
+* search path for prerequisites ('VPATH'), and implicit rules: Implicit/Search.
+                                                              (line   6)
+* search path for prerequisites ('VPATH'), and link libraries: Libraries/Search.
+                                                              (line   6)
+* searching for strings:                 Text Functions.      (line 104)
+* secondary expansion:                   Secondary Expansion. (line   6)
+* secondary expansion and explicit rules: Secondary Expansion.
+                                                              (line 104)
+* secondary expansion and implicit rules: Secondary Expansion.
+                                                              (line 144)
+* secondary expansion and static pattern rules: Secondary Expansion.
+                                                              (line 136)
+* secondary files:                       Chained Rules.       (line  46)
+* secondary targets:                     Special Targets.     (line  54)
+* 'sed' (shell command):                 Automatic Prerequisites.
+                                                              (line  72)
+* selecting a word:                      Text Functions.      (line 159)
+* selecting word lists:                  Text Functions.      (line 168)
+* sequences of commands:                 Canned Recipes.      (line   6)
+* setting options from environment:      Options/Recursion.   (line  81)
+* setting options in makefiles:          Options/Recursion.   (line  81)
+* setting variables:                     Setting.             (line   6)
+* several rules for one target:          Multiple Rules.      (line   6)
+* several targets in a rule:             Multiple Targets.    (line   6)
+* 'shar' (standard target):              Goals.               (line 104)
+* shell command, function for:           Shell Function.      (line   6)
+* shell file name pattern (in 'include'): Include.            (line  13)
+* shell variables, setting in recipes:   Execution.           (line  12)
+* shell wildcards (in 'include'):        Include.             (line  13)
+* shell, choosing the:                   Choosing the Shell.  (line   6)
+* SHELL, exported value:                 Variables/Recursion. (line  23)
+* SHELL, import from environment:        Environment.         (line  37)
+* shell, in DOS and Windows:             Choosing the Shell.  (line  38)
+* 'SHELL', MS-DOS specifics:             Choosing the Shell.  (line  44)
+* 'SHELL', value of:                     Choosing the Shell.  (line   6)
+* signal:                                Interrupts.          (line   6)
+* silent operation:                      Echoing.             (line   6)
+* simple makefile:                       Simple Makefile.     (line   6)
+* simple variable expansion:             Using Variables.     (line   6)
+* simplifying with variables:            Variables Simplify.  (line   6)
+* simply expanded variables:             Flavors.             (line  56)
+* sorting words:                         Text Functions.      (line 147)
+* spaces, in variable values:            Flavors.             (line 107)
+* spaces, stripping:                     Text Functions.      (line  80)
+* special targets:                       Special Targets.     (line   6)
+* special variables:                     Special Variables.   (line   6)
+* specifying makefile name:              Makefile Names.      (line  31)
+* splitting long lines:                  Splitting Lines.     (line   6)
+* splitting recipes:                     Splitting Recipe Lines.
+                                                              (line   6)
+* staged installs:                       DESTDIR.             (line   6)
+* standard input:                        Parallel Input.      (line   6)
+* standards conformance:                 Overview.            (line  13)
+* standards for makefiles:               Makefile Conventions.
+                                                              (line   6)
+* static pattern rule:                   Static Pattern.      (line   6)
+* static pattern rule, syntax of:        Static Usage.        (line   6)
+* static pattern rule, versus implicit:  Static versus Implicit.
+                                                              (line   6)
+* static pattern rules, secondary expansion of: Secondary Expansion.
+                                                              (line 136)
+* stem:                                  Static Usage.        (line  17)
+* stem <1>:                              Pattern Match.       (line   6)
+* stem, shortest:                        Pattern Match.       (line  38)
+* stem, variable for:                    Automatic Variables. (line  77)
+* stopping make:                         Make Control Functions.
+                                                              (line  11)
+* strings, searching for:                Text Functions.      (line 104)
+* stripping whitespace:                  Text Functions.      (line  80)
+* sub-'make':                            Variables/Recursion. (line   6)
+* subdirectories, recursion for:         Recursion.           (line   6)
+* substitution variable reference:       Substitution Refs.   (line   6)
+* suffix rule:                           Suffix Rules.        (line   6)
+* suffix rule, for archive:              Archive Suffix Rules.
+                                                              (line   6)
+* suffix, adding:                        File Name Functions. (line  67)
+* suffix, function to find:              File Name Functions. (line  42)
+* suffix, substituting in variables:     Substitution Refs.   (line   6)
+* suppressing inheritance:               Suppressing Inheritance.
+                                                              (line   6)
+* switches:                              Options Summary.     (line   6)
+* symbol directories, updating archive:  Archive Symbols.     (line   6)
+* syntax of recipe:                      Recipe Syntax.       (line   6)
+* syntax of rules:                       Rule Syntax.         (line   6)
+* tab character (in commands):           Rule Syntax.         (line  25)
+* tabs in rules:                         Rule Introduction.   (line  21)
+* 'TAGS' (standard target):              Goals.               (line 112)
+* tangle:                                Catalogue of Rules.  (line 149)
+* tangle <1>:                            Implicit Variables.  (line 100)
+* 'tar' (standard target):               Goals.               (line 101)
+* target:                                Rules.               (line   6)
+* target pattern, implicit:              Pattern Intro.       (line   9)
+* target pattern, static (not implicit): Static Usage.        (line  17)
+* target, deleting on error:             Errors.              (line  64)
+* target, deleting on interrupt:         Interrupts.          (line   6)
+* target, expansion:                     Reading Makefiles.   (line  92)
+* target, multiple in pattern rule:      Pattern Intro.       (line  53)
+* target, multiple rules for one:        Multiple Rules.      (line   6)
+* target, touching:                      Instead of Execution.
+                                                              (line  24)
+* target-specific variables:             Target-specific.     (line   6)
+* targets:                               Rule Syntax.         (line  18)
+* targets without a file:                Phony Targets.       (line   6)
+* targets, built-in special:             Special Targets.     (line   6)
+* targets, empty:                        Empty Targets.       (line   6)
+* targets, force:                        Force Targets.       (line   6)
+* targets, introduction to:              Rule Introduction.   (line   8)
+* targets, multiple:                     Multiple Targets.    (line   6)
+* targets, phony:                        Phony Targets.       (line   6)
+* terminal rule:                         Match-Anything Rules.
+                                                              (line   6)
+* 'test' (standard target):              Goals.               (line 116)
+* testing compilation:                   Testing.             (line   6)
+* tex:                                   Catalogue of Rules.  (line 149)
+* tex <1>:                               Implicit Variables.  (line  87)
+* TeX, rule to run:                      Catalogue of Rules.  (line 149)
+* texi2dvi:                              Catalogue of Rules.  (line 156)
+* texi2dvi <1>:                          Implicit Variables.  (line  91)
+* Texinfo, rule to format:               Catalogue of Rules.  (line 156)
+* tilde ('~'):                           Wildcards.           (line  11)
+* 'touch' (shell command):               Wildcard Examples.   (line  21)
+* 'touch' (shell command) <1>:           Empty Targets.       (line  25)
+* touching files:                        Instead of Execution.
+                                                              (line  24)
+* traditional directory search (GPATH):  Search Algorithm.    (line  42)
+* types of prerequisites:                Prerequisite Types.  (line   6)
+* types, conversion of:                  Guile Types.         (line   6)
+* undefined variables, warning message:  Options Summary.     (line 292)
+* undefining variable:                   Undefine Directive.  (line   6)
+* updating archive symbol directories:   Archive Symbols.     (line   6)
+* updating loaded objects:               Remaking Loaded Objects.
+                                                              (line   6)
+* updating makefiles:                    Remaking Makefiles.  (line   6)
+* user defined functions:                Call Function.       (line   6)
+* value:                                 Using Variables.     (line   6)
+* value, how a variable gets it:         Values.              (line   6)
+* variable:                              Using Variables.     (line   6)
+* variable definition:                   Makefile Contents.   (line  22)
+* variable references in recipes:        Variables in Recipes.
+                                                              (line   6)
+* variables:                             Variables Simplify.  (line   6)
+* variables, '$' in name:                Computed Names.      (line   6)
+* variables, and implicit rule:          Automatic Variables. (line   6)
+* variables, appending to:               Appending.           (line   6)
+* variables, automatic:                  Automatic Variables. (line   6)
+* variables, command line:               Overriding.          (line   6)
+* variables, command line, and recursion: Options/Recursion.  (line  17)
+* variables, computed names:             Computed Names.      (line   6)
+* variables, conditional assignment:     Flavors.             (line 135)
+* variables, defining verbatim:          Multi-Line.          (line   6)
+* variables, environment:                Variables/Recursion. (line   6)
+* variables, environment <1>:            Environment.         (line   6)
+* variables, exporting:                  Variables/Recursion. (line   6)
+* variables, flavor of:                  Flavor Function.     (line   6)
+* variables, flavors:                    Flavors.             (line   6)
+* variables, how they get their values:  Values.              (line   6)
+* variables, how to reference:           Reference.           (line   6)
+* variables, loops in expansion:         Flavors.             (line  44)
+* variables, modified reference:         Substitution Refs.   (line   6)
+* variables, multi-line:                 Multi-Line.          (line   6)
+* variables, nested references:          Computed Names.      (line   6)
+* variables, origin of:                  Origin Function.     (line   6)
+* variables, overriding:                 Override Directive.  (line   6)
+* variables, overriding with arguments:  Overriding.          (line   6)
+* variables, pattern-specific:           Pattern-specific.    (line   6)
+* variables, recursively expanded:       Flavors.             (line   6)
+* variables, setting:                    Setting.             (line   6)
+* variables, simply expanded:            Flavors.             (line  56)
+* variables, spaces in values:           Flavors.             (line 107)
+* variables, substituting suffix in:     Substitution Refs.   (line   6)
+* variables, substitution reference:     Substitution Refs.   (line   6)
+* variables, target-specific:            Target-specific.     (line   6)
+* variables, unexpanded value:           Value Function.      (line   6)
+* variables, warning for undefined:      Options Summary.     (line 292)
+* varying prerequisites:                 Static Pattern.      (line   6)
+* verbatim variable definition:          Multi-Line.          (line   6)
+* vpath:                                 Directory Search.    (line   6)
+* 'VPATH', and implicit rules:           Implicit/Search.     (line   6)
+* 'VPATH', and link libraries:           Libraries/Search.    (line   6)
+* warnings, printing:                    Make Control Functions.
+                                                              (line  35)
+* weave:                                 Catalogue of Rules.  (line 149)
+* weave <1>:                             Implicit Variables.  (line  94)
+* Web, rule to run:                      Catalogue of Rules.  (line 149)
+* what if:                               Instead of Execution.
+                                                              (line  41)
+* whitespace, in variable values:        Flavors.             (line 107)
+* whitespace, stripping:                 Text Functions.      (line  80)
+* wildcard:                              Wildcards.           (line   6)
+* wildcard pitfalls:                     Wildcard Pitfall.    (line   6)
+* wildcard, function:                    File Name Functions. (line 106)
+* wildcard, in archive member:           Archive Members.     (line  36)
+* wildcard, in 'include':                Include.             (line  13)
+* wildcards and MS-DOS/MS-Windows backslashes: Wildcard Pitfall.
+                                                              (line  31)
+* Windows, choosing a shell in:          Choosing the Shell.  (line  38)
+* word, selecting a:                     Text Functions.      (line 159)
+* words, extracting first:               Text Functions.      (line 185)
+* words, extracting last:                Text Functions.      (line 198)
+* words, filtering:                      Text Functions.      (line 115)
+* words, filtering out:                  Text Functions.      (line 133)
+* words, finding number:                 Text Functions.      (line 180)
+* words, iterating over:                 Foreach Function.    (line   6)
+* words, joining lists:                  File Name Functions. (line  89)
+* words, removing duplicates:            Text Functions.      (line 155)
+* words, selecting lists of:             Text Functions.      (line 168)
+* writing recipes:                       Recipes.             (line   6)
+* writing rules:                         Rules.               (line   6)
+* writing to a file:                     File Function.       (line   6)
+* yacc:                                  Catalogue of Rules.  (line 117)
+* yacc <1>:                              Implicit Variables.  (line  77)
+* 'yacc':                                Canned Recipes.      (line  18)
+* Yacc, rule to run:                     Catalogue of Rules.  (line 117)
+
+
+File: make.info,  Node: Name Index,  Prev: Concept Index,  Up: Top
+
+Index of Functions, Variables, & Directives
+*******************************************
+
+
+* Menu:
+
+* $%:                                    Automatic Variables. (line  37)
+* $(%D):                                 Automatic Variables. (line 129)
+* $(%F):                                 Automatic Variables. (line 130)
+* $(*D):                                 Automatic Variables. (line 124)
+* $(*F):                                 Automatic Variables. (line 125)
+* $(+D):                                 Automatic Variables. (line 147)
+* $(+F):                                 Automatic Variables. (line 148)
+* $(<D):                                 Automatic Variables. (line 137)
+* $(<F):                                 Automatic Variables. (line 138)
+* $(?D):                                 Automatic Variables. (line 153)
+* $(?F):                                 Automatic Variables. (line 154)
+* $(@D):                                 Automatic Variables. (line 113)
+* $(@F):                                 Automatic Variables. (line 119)
+* $(^D):                                 Automatic Variables. (line 142)
+* $(^F):                                 Automatic Variables. (line 143)
+* $*:                                    Automatic Variables. (line  73)
+* $*, and static pattern:                Static Usage.        (line  82)
+* $+:                                    Automatic Variables. (line  63)
+* $<:                                    Automatic Variables. (line  43)
+* $?:                                    Automatic Variables. (line  48)
+* $@:                                    Automatic Variables. (line  30)
+* $^:                                    Automatic Variables. (line  53)
+* $|:                                    Automatic Variables. (line  69)
+* % (automatic variable):                Automatic Variables. (line  37)
+* %D (automatic variable):               Automatic Variables. (line 129)
+* %F (automatic variable):               Automatic Variables. (line 130)
+* * (automatic variable):                Automatic Variables. (line  73)
+* * (automatic variable), unsupported bizarre usage: Missing. (line  44)
+* *D (automatic variable):               Automatic Variables. (line 124)
+* *F (automatic variable):               Automatic Variables. (line 125)
+* + (automatic variable):                Automatic Variables. (line  63)
+* +D (automatic variable):               Automatic Variables. (line 147)
+* +F (automatic variable):               Automatic Variables. (line 148)
+* -load:                                 load Directive.      (line  65)
+* .DEFAULT:                              Special Targets.     (line  22)
+* .DEFAULT <1>:                          Last Resort.         (line  23)
+* .DEFAULT, and empty recipes:           Empty Recipes.       (line  16)
+* .DEFAULT_GOAL (define default goal):   Special Variables.   (line  34)
+* .DELETE_ON_ERROR:                      Special Targets.     (line  70)
+* .DELETE_ON_ERROR <1>:                  Errors.              (line  64)
+* .EXPORT_ALL_VARIABLES:                 Special Targets.     (line 135)
+* .EXPORT_ALL_VARIABLES <1>:             Variables/Recursion. (line  99)
+* .FEATURES (list of supported features): Special Variables.  (line 121)
+* .IGNORE:                               Special Targets.     (line  77)
+* .IGNORE <1>:                           Errors.              (line  30)
+* .INCLUDE_DIRS (list of include directories): Special Variables.
+                                                              (line 174)
+* .INTERMEDIATE:                         Special Targets.     (line  47)
+* .LIBPATTERNS:                          Libraries/Search.    (line   6)
+* .LOADED:                               load Directive.      (line  62)
+* .LOW_RESOLUTION_TIME:                  Special Targets.     (line  90)
+* .NOTPARALLEL:                          Special Targets.     (line 141)
+* .ONESHELL:                             Special Targets.     (line 149)
+* .ONESHELL <1>:                         One Shell.           (line   6)
+* .PHONY:                                Phony Targets.       (line  22)
+* .PHONY <1>:                            Special Targets.     (line   8)
+* .POSIX:                                Special Targets.     (line 156)
+* .POSIX <1>:                            Options/Recursion.   (line  61)
+* .PRECIOUS:                             Special Targets.     (line  31)
+* .PRECIOUS <1>:                         Interrupts.          (line  22)
+* .RECIPEPREFIX (change the recipe prefix character): Special Variables.
+                                                              (line  99)
+* .SECONDARY:                            Special Targets.     (line  53)
+* .SECONDEXPANSION:                      Secondary Expansion. (line   6)
+* .SECONDEXPANSION <1>:                  Special Targets.     (line  63)
+* .SHELLFLAGS:                           Choosing the Shell.  (line   6)
+* .SHELLFLAGS <1>:                       Choosing the Shell.  (line  87)
+* .SILENT:                               Special Targets.     (line 121)
+* .SILENT <1>:                           Echoing.             (line  24)
+* .SUFFIXES:                             Special Targets.     (line  16)
+* .SUFFIXES <1>:                         Suffix Rules.        (line  61)
+* .VARIABLES (list of variables):        Special Variables.   (line 112)
+* /usr/gnu/include:                      Include.             (line  53)
+* /usr/include:                          Include.             (line  53)
+* /usr/local/include:                    Include.             (line  53)
+* < (automatic variable):                Automatic Variables. (line  43)
+* <D (automatic variable):               Automatic Variables. (line 137)
+* <F (automatic variable):               Automatic Variables. (line 138)
+* ? (automatic variable):                Automatic Variables. (line  48)
+* ?D (automatic variable):               Automatic Variables. (line 153)
+* ?F (automatic variable):               Automatic Variables. (line 154)
+* @ (automatic variable):                Automatic Variables. (line  30)
+* @D (automatic variable):               Automatic Variables. (line 113)
+* @F (automatic variable):               Automatic Variables. (line 119)
+* ^ (automatic variable):                Automatic Variables. (line  53)
+* ^D (automatic variable):               Automatic Variables. (line 142)
+* ^F (automatic variable):               Automatic Variables. (line 143)
+* | (automatic variable):                Automatic Variables. (line  69)
+* abspath:                               File Name Functions. (line 120)
+* addprefix:                             File Name Functions. (line  78)
+* addsuffix:                             File Name Functions. (line  67)
+* and:                                   Conditional Functions.
+                                                              (line  45)
+* AR:                                    Implicit Variables.  (line  40)
+* ARFLAGS:                               Implicit Variables.  (line 113)
+* AS:                                    Implicit Variables.  (line  43)
+* ASFLAGS:                               Implicit Variables.  (line 116)
+* basename:                              File Name Functions. (line  56)
+* bindir:                                Directory Variables. (line  57)
+* call:                                  Call Function.       (line   6)
+* CC:                                    Implicit Variables.  (line  46)
+* CFLAGS:                                Implicit Variables.  (line 120)
+* CO:                                    Implicit Variables.  (line  66)
+* COFLAGS:                               Implicit Variables.  (line 126)
+* COMSPEC:                               Choosing the Shell.  (line  41)
+* CPP:                                   Implicit Variables.  (line  52)
+* CPPFLAGS:                              Implicit Variables.  (line 129)
+* CTANGLE:                               Implicit Variables.  (line 103)
+* 'CURDIR':                              Recursion.           (line  28)
+* CWEAVE:                                Implicit Variables.  (line  97)
+* CXX:                                   Implicit Variables.  (line  49)
+* CXXFLAGS:                              Implicit Variables.  (line 123)
+* define:                                Multi-Line.          (line   6)
+* DESTDIR:                               DESTDIR.             (line   6)
+* dir:                                   File Name Functions. (line  16)
+* else:                                  Conditional Syntax.  (line   6)
+* endef:                                 Multi-Line.          (line   6)
+* endif:                                 Conditional Syntax.  (line   6)
+* error:                                 Make Control Functions.
+                                                              (line  11)
+* eval:                                  Eval Function.       (line   6)
+* exec_prefix:                           Directory Variables. (line  39)
+* export:                                Variables/Recursion. (line  40)
+* FC:                                    Implicit Variables.  (line  56)
+* FFLAGS:                                Implicit Variables.  (line 133)
+* file:                                  File Function.       (line   6)
+* filter:                                Text Functions.      (line 115)
+* filter-out:                            Text Functions.      (line 133)
+* findstring:                            Text Functions.      (line 104)
+* firstword:                             Text Functions.      (line 185)
+* flavor:                                Flavor Function.     (line   6)
+* foreach:                               Foreach Function.    (line   6)
+* GET:                                   Implicit Variables.  (line  69)
+* GFLAGS:                                Implicit Variables.  (line 136)
+* gmk-eval:                              Guile Interface.     (line  18)
+* gmk-expand:                            Guile Interface.     (line  12)
+* gmk_add_function:                      Loaded Object API.   (line  53)
+* gmk_alloc:                             Loaded Object API.   (line 149)
+* gmk_eval:                              Loaded Object API.   (line 123)
+* gmk_expand:                            Loaded Object API.   (line 117)
+* gmk_free:                              Loaded Object API.   (line 154)
+* gmk_func_ptr:                          Loaded Object API.   (line  95)
+* GNUmakefile:                           Makefile Names.      (line   7)
+* GPATH:                                 Search Algorithm.    (line  48)
+* guile:                                 Guile Function.      (line   6)
+* if:                                    Conditional Functions.
+                                                              (line   6)
+* if <1>:                                Conditional Functions.
+                                                              (line  12)
+* ifdef:                                 Conditional Syntax.  (line   6)
+* ifeq:                                  Conditional Syntax.  (line   6)
+* ifndef:                                Conditional Syntax.  (line   6)
+* ifneq:                                 Conditional Syntax.  (line   6)
+* include:                               Include.             (line   6)
+* info:                                  Make Control Functions.
+                                                              (line  43)
+* join:                                  File Name Functions. (line  89)
+* lastword:                              Text Functions.      (line 198)
+* LDFLAGS:                               Implicit Variables.  (line 139)
+* LDLIBS:                                Implicit Variables.  (line 144)
+* LEX:                                   Implicit Variables.  (line  72)
+* LFLAGS:                                Implicit Variables.  (line 150)
+* libexecdir:                            Directory Variables. (line  70)
+* LINT:                                  Implicit Variables.  (line  80)
+* LINTFLAGS:                             Implicit Variables.  (line 162)
+* load:                                  load Directive.      (line   9)
+* LOADLIBES:                             Implicit Variables.  (line 144)
+* M2C:                                   Implicit Variables.  (line  60)
+* MAKE:                                  MAKE Variable.       (line   6)
+* MAKE <1>:                              Flavors.             (line  88)
+* MAKECMDGOALS:                          Goals.               (line  30)
+* Makefile:                              Makefile Names.      (line   7)
+* makefile:                              Makefile Names.      (line   7)
+* MAKEFILES:                             MAKEFILES Variable.  (line   6)
+* MAKEFILES <1>:                         Variables/Recursion. (line 126)
+* MAKEFILE_LIST (list of parsed makefiles): Special Variables.
+                                                              (line   8)
+* MAKEFLAGS:                             Options/Recursion.   (line   6)
+* MAKEINFO:                              Implicit Variables.  (line  83)
+* MAKELEVEL:                             Variables/Recursion. (line 114)
+* MAKELEVEL <1>:                         Flavors.             (line  88)
+* MAKEOVERRIDES:                         Options/Recursion.   (line  50)
+* 'MAKESHELL' (MS-DOS alternative to 'SHELL'): Choosing the Shell.
+                                                              (line  27)
+* MAKE_HOST:                             Quick Reference.     (line 348)
+* MAKE_RESTARTS (number of times 'make' has restarted): Special Variables.
+                                                              (line  73)
+* MAKE_TERMERR (whether stderr is a terminal): Special Variables.
+                                                              (line  80)
+* MAKE_TERMOUT (whether stdout is a terminal): Special Variables.
+                                                              (line  80)
+* MAKE_VERSION:                          Quick Reference.     (line 343)
+* MFLAGS:                                Options/Recursion.   (line  66)
+* notdir:                                File Name Functions. (line  26)
+* or:                                    Conditional Functions.
+                                                              (line  37)
+* origin:                                Origin Function.     (line   6)
+* OUTPUT_OPTION:                         Catalogue of Rules.  (line 200)
+* override:                              Override Directive.  (line   6)
+* patsubst:                              Substitution Refs.   (line  28)
+* patsubst <1>:                          Text Functions.      (line  18)
+* PC:                                    Implicit Variables.  (line  63)
+* PFLAGS:                                Implicit Variables.  (line 156)
+* prefix:                                Directory Variables. (line  29)
+* private:                               Suppressing Inheritance.
+                                                              (line   6)
+* realpath:                              File Name Functions. (line 113)
+* RFLAGS:                                Implicit Variables.  (line 159)
+* RM:                                    Implicit Variables.  (line 106)
+* sbindir:                               Directory Variables. (line  63)
+* SHELL:                                 Choosing the Shell.  (line   6)
+* SHELL <1>:                             Choosing the Shell.  (line  88)
+* shell:                                 Shell Function.      (line   6)
+* 'SHELL' (recipe execution):            Execution.           (line   6)
+* sort:                                  Text Functions.      (line 147)
+* strip:                                 Text Functions.      (line  80)
+* subst:                                 Multiple Targets.    (line  28)
+* subst <1>:                             Text Functions.      (line   9)
+* suffix:                                File Name Functions. (line  42)
+* SUFFIXES:                              Suffix Rules.        (line  81)
+* TANGLE:                                Implicit Variables.  (line 100)
+* TEX:                                   Implicit Variables.  (line  87)
+* TEXI2DVI:                              Implicit Variables.  (line  90)
+* undefine:                              Undefine Directive.  (line   6)
+* unexport:                              Variables/Recursion. (line  45)
+* value:                                 Value Function.      (line   6)
+* VPATH:                                 Directory Search.    (line   6)
+* VPATH <1>:                             General Search.      (line   6)
+* vpath:                                 Directory Search.    (line   6)
+* vpath <1>:                             Selective Search.    (line   6)
+* warning:                               Make Control Functions.
+                                                              (line  35)
+* WEAVE:                                 Implicit Variables.  (line  94)
+* wildcard:                              Wildcard Function.   (line   6)
+* wildcard <1>:                          File Name Functions. (line 106)
+* word:                                  Text Functions.      (line 159)
+* wordlist:                              Text Functions.      (line 168)
+* words:                                 Text Functions.      (line 180)
+* YACC:                                  Implicit Variables.  (line  76)
+* YFLAGS:                                Implicit Variables.  (line 153)
+
diff --git a/doc/make.texi b/doc/make.texi
new file mode 100644
index 0000000..b0f5af7
--- /dev/null
+++ b/doc/make.texi
@@ -0,0 +1,12556 @@
+\input texinfo                @c -*- Texinfo -*-
+@c %**start of header
+@setfilename make.info
+
+@include version.texi
+@set EDITION 0.73
+
+@settitle GNU @code{make}
+@setchapternewpage odd
+@c Combine the variable and function indices:
+@syncodeindex vr fn
+@c Combine the program and concept indices:
+@syncodeindex pg cp
+@c FSF publishers: format makebook.texi instead of using this file directly.
+@c ISBN confirmed by Jasimin Huang <jasimin@fsf.org> on 25 Mar 2009
+@set ISBN 1-882114-83-3
+@c %**end of header
+
+@copying
+This file documents the GNU @code{make} utility, which determines
+automatically which pieces of a large program need to be recompiled,
+and issues the commands to recompile them.
+
+This is Edition @value{EDITION}, last updated @value{UPDATED},
+of @cite{The GNU Make Manual}, for GNU @code{make} version @value{VERSION}.
+
+Copyright @copyright{} 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+1996, 1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007,
+2008, 2009, 2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,''
+and with the Back-Cover Texts as in (a) below.  A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License.''
+
+(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and
+modify this GNU manual.  Buying copies from the FSF supports it in
+developing GNU and promoting software freedom.''
+@end quotation
+@end copying
+
+@c finalout
+
+@c ISPELL CHECK: done, 10 June 1993 --roland
+@c ISPELL CHECK: done, 2000-06-25 --Martin Buchholz
+
+
+@dircategory Software development
+@direntry
+* Make: (make).            Remake files automatically.
+@end direntry
+
+@iftex
+@shorttitlepage GNU Make
+@end iftex
+@titlepage
+@title GNU Make
+@subtitle A Program for Directing Recompilation
+@subtitle GNU @code{make} Version @value{VERSION}
+@subtitle @value{UPDATED-MONTH}
+@author Richard M. Stallman, Roland McGrath, Paul D. Smith
+@page
+@vskip 0pt plus 1filll
+@insertcopying
+@sp 2
+Published by the Free Software Foundation @*
+51 Franklin St. -- Fifth Floor @*
+Boston, MA 02110-1301 USA @*
+ISBN @value{ISBN} @*
+@sp 2
+Cover art by Etienne Suvasa.
+@end titlepage
+
+@summarycontents
+@contents
+
+@ifnottex
+@node Top, Overview, (dir), (dir)
+@top GNU @code{make}
+
+@insertcopying
+@end ifnottex
+
+@menu
+* Overview::                    Overview of @code{make}.
+* Introduction::                An introduction to @code{make}.
+* Makefiles::                   Makefiles tell @code{make} what to do.
+* Rules::                       Rules describe when a file must be remade.
+* Recipes::                     Recipes say how to remake a file.
+* Using Variables::             You can use variables to avoid repetition.
+* Conditionals::                Use or ignore parts of the makefile based
+                                  on the values of variables.
+* Functions::                   Many powerful ways to manipulate text.
+* Invoking make: Running.       How to invoke @code{make} on the command line.
+* Implicit Rules::              Use implicit rules to treat many files alike,
+                                  based on their file names.
+* Archives::                    How @code{make} can update library archives.
+* Extending make::              Using extensions to @code{make}.
+* Features::                    Features GNU @code{make} has over other @code{make}s.
+* Missing::                     What GNU @code{make} lacks from other @code{make}s.
+* Makefile Conventions::        Conventions for writing makefiles for
+                                  GNU programs.
+* Quick Reference::             A quick reference for experienced users.
+* Error Messages::              A list of common errors generated by @code{make}.
+* Complex Makefile::            A real example of a straightforward,
+                                  but nontrivial, makefile.
+
+* GNU Free Documentation License::  License for copying this manual.
+* Concept Index::               Index of Concepts.
+* Name Index::                  Index of Functions, Variables, & Directives.
+
+@detailmenu
+ --- The Detailed Node Listing ---
+
+Overview of @code{make}
+
+* Preparing::                   Preparing and running @code{make}.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+
+An Introduction to Makefiles
+
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How @code{make} processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting @code{make} deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+
+Writing Makefiles
+
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+
+What Makefiles Contain
+
+* Splitting Lines::             Splitting long lines in makefiles
+
+Writing Rules
+
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as `*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+
+Using Wildcard Characters in File Names
+
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+
+Searching Directories for Prerequisites
+
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+
+Static Pattern Rules
+
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+
+Writing Recipes in Rules
+
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking @code{make} from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+
+Recipe Syntax
+
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using @code{make} variables in recipes.
+
+Recipe Execution
+
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How @code{make} chooses the shell used
+                                  to run recipes.
+
+Parallel Execution
+
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+
+Recursive Use of @code{make}
+
+* MAKE Variable::               The special effects of using @samp{$(MAKE)}.
+* Variables/Recursion::         How to communicate variables to a sub-@code{make}.
+* Options/Recursion::           How to communicate options to a sub-@code{make}.
+* -w Option::                   How the @samp{-w} or @samp{--print-directory} option
+                                  helps debug use of recursive @code{make} commands.
+
+How to Use Variables
+
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+
+Advanced Features for Reference to Variables
+
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+
+Conditional Parts of Makefiles
+
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+
+Functions for Transforming Text
+
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+
+How to Run @code{make}
+
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+
+Using Implicit Rules
+
+* Using Implicit::              How to use an existing implicit rule
+                                  to get the recipes for updating a file.
+* Catalogue of Rules::          A list of built-in rules.
+* Implicit Variables::          How to change what predefined rules do.
+* Chained Rules::               How to use a chain of implicit rules.
+* Pattern Rules::               How to define new implicit rules.
+* Last Resort::                 How to define a recipe for rules which
+                                  cannot find any.
+* Suffix Rules::                The old-fashioned style of implicit rule.
+* Implicit Rule Search::        The precise algorithm for applying
+                                  implicit rules.
+
+Defining and Redefining Pattern Rules
+
+* Pattern Intro::               An introduction to pattern rules.
+* Pattern Examples::            Examples of pattern rules.
+* Automatic Variables::         How to use automatic variables in the
+                                  recipe of implicit rules.
+* Pattern Match::               How patterns match.
+* Match-Anything Rules::        Precautions you should take prior to
+                                  defining rules that can match any
+                                  target file whatever.
+* Canceling Rules::             How to override or cancel built-in rules.
+
+Using @code{make} to Update Archive Files
+
+* Archive Members::             Archive members as targets.
+* Archive Update::              The implicit rule for archive member targets.
+* Archive Pitfalls::            Dangers to watch out for when using archives.
+* Archive Suffix Rules::        You can write a special kind of suffix rule
+                                  for updating archives.
+
+Implicit Rule for Archive Member Targets
+
+* Archive Symbols::             How to update archive symbol directories.
+
+Extending GNU @code{make}
+
+* Guile Integration::           Using Guile as an embedded scripting language.
+* Loading Objects::             Loading dynamic objects as extensions.
+
+GNU Guile Integration
+
+* Guile Types::                 Converting Guile types to @code{make} strings.
+* Guile Interface::             Invoking @code{make} functions from Guile.
+* Guile Example::               Example using Guile in @code{make}.
+
+Loading Dynamic Objects
+
+* load Directive::              Loading dynamic objects as extensions.
+* Remaking Loaded Objects::     How loaded objects get remade.
+* Loaded Object API::           Programmatic interface for loaded objects.
+* Loaded Object Example::       Example of a loaded object
+
+@end detailmenu
+@end menu
+
+@node Overview, Introduction, Top, Top
+@comment  node-name,  next,  previous,  up
+@chapter Overview of @code{make}
+
+The @code{make} utility automatically determines which pieces of a large
+program need to be recompiled, and issues commands to recompile them.
+This manual describes GNU @code{make}, which was implemented by Richard
+Stallman and Roland McGrath.  Development since Version 3.76 has been
+handled by Paul D. Smith.
+
+GNU @code{make} conforms to section 6.2 of @cite{IEEE Standard
+1003.2-1992} (POSIX.2).
+@cindex POSIX
+@cindex IEEE Standard 1003.2
+@cindex standards conformance
+
+Our examples show C programs, since they are most common, but you can use
+@code{make} with any programming language whose compiler can be run with a
+shell command.  Indeed, @code{make} is not limited to programs.  You can
+use it to describe any task where some files must be updated automatically
+from others whenever the others change.
+
+@menu
+* Preparing::                   Preparing and running @code{make}.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+@end menu
+
+@node Preparing, Reading, Overview, Overview
+@ifnottex
+@heading Preparing and Running Make
+@end ifnottex
+
+To prepare to use @code{make}, you must write a file called
+the @dfn{makefile} that describes the relationships among files
+in your program and provides commands for updating each file.
+In a program, typically, the executable file is updated from object
+files, which are in turn made by compiling source files.@refill
+
+Once a suitable makefile exists, each time you change some source files,
+this simple shell command:
+
+@example
+make
+@end example
+
+@noindent
+suffices to perform all necessary recompilations.  The @code{make} program
+uses the makefile data base and the last-modification times of the files to
+decide which of the files need to be updated.  For each of those files, it
+issues the recipes recorded in the data base.
+
+You can provide command line arguments to @code{make} to control which
+files should be recompiled, or how.  @xref{Running, ,How to Run
+@code{make}}.
+
+@node Reading, Bugs, Preparing, Overview
+@section How to Read This Manual
+
+If you are new to @code{make}, or are looking for a general
+introduction, read the first few sections of each chapter, skipping the
+later sections.  In each chapter, the first few sections contain
+introductory or general information and the later sections contain
+specialized or technical information.
+@ifnottex
+The exception is the second chapter, @ref{Introduction, ,An
+Introduction to Makefiles}, all of which is introductory.
+@end ifnottex
+@iftex
+The exception is @ref{Introduction, ,An Introduction to Makefiles},
+all of which is introductory.
+@end iftex
+
+If you are familiar with other @code{make} programs, see @ref{Features,
+,Features of GNU @code{make}}, which lists the enhancements GNU
+@code{make} has, and @ref{Missing, ,Incompatibilities and Missing
+Features}, which explains the few things GNU @code{make} lacks that
+others have.
+
+For a quick summary, see @ref{Options Summary}, @ref{Quick Reference},
+and @ref{Special Targets}.
+
+@node Bugs,  , Reading, Overview
+@section Problems and Bugs
+@cindex reporting bugs
+@cindex bugs, reporting
+@cindex problems and bugs, reporting
+
+If you have problems with GNU @code{make} or think you've found a bug,
+please report it to the developers; we cannot promise to do anything but
+we might well want to fix it.
+
+Before reporting a bug, make sure you've actually found a real bug.
+Carefully reread the documentation and see if it really says you can do
+what you're trying to do.  If it's not clear whether you should be able
+to do something or not, report that too; it's a bug in the
+documentation!
+
+Before reporting a bug or trying to fix it yourself, try to isolate it
+to the smallest possible makefile that reproduces the problem.  Then
+send us the makefile and the exact results @code{make} gave you,
+including any error or warning messages.  Please don't paraphrase
+these messages: it's best to cut and paste them into your report.
+When generating this small makefile, be sure to not use any non-free
+or unusual tools in your recipes: you can almost always emulate what
+such a tool would do with simple shell commands.  Finally, be sure to
+explain what you expected to occur; this will help us decide whether
+the problem was really in the documentation.
+
+Once you have a precise problem you can report it in one of two ways.
+Either send electronic mail to:
+
+@example
+    bug-make@@gnu.org
+@end example
+
+@noindent
+or use our Web-based project management tool, at:
+
+@example
+    http://savannah.gnu.org/projects/make/
+@end example
+
+@noindent
+In addition to the information above, please be careful to include the
+version number of @code{make} you are using.  You can get this
+information with the command @samp{make --version}.  Be sure also to
+include the type of machine and operating system you are using.  One
+way to obtain this information is by looking at the final lines of
+output from the command @samp{make --help}.
+
+@node Introduction, Makefiles, Overview, Top
+@comment  node-name,  next,  previous,  up
+@chapter An Introduction to Makefiles
+
+You need a file called a @dfn{makefile} to tell @code{make} what to do.
+Most often, the makefile tells @code{make} how to compile and link a
+program.
+@cindex makefile
+
+In this chapter, we will discuss a simple makefile that describes how to
+compile and link a text editor which consists of eight C source files
+and three header files.  The makefile can also tell @code{make} how to
+run miscellaneous commands when explicitly asked (for example, to remove
+certain files as a clean-up operation).  To see a more complex example
+of a makefile, see @ref{Complex Makefile}.
+
+When @code{make} recompiles the editor, each changed C source file
+must be recompiled.  If a header file has changed, each C source file
+that includes the header file must be recompiled to be safe.  Each
+compilation produces an object file corresponding to the source file.
+Finally, if any source file has been recompiled, all the object files,
+whether newly made or saved from previous compilations, must be linked
+together to produce the new executable editor.
+@cindex recompilation
+@cindex editor
+
+@menu
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How @code{make} processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting @code{make} deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+@end menu
+
+@node Rule Introduction, Simple Makefile, Introduction, Introduction
+@comment  node-name,  next,  previous,  up
+@section What a Rule Looks Like
+@cindex rule, introduction to
+@cindex makefile rule parts
+@cindex parts of makefile rule
+
+A simple makefile consists of ``rules'' with the following shape:
+
+@cindex targets, introduction to
+@cindex prerequisites, introduction to
+@cindex recipes, introduction to
+@example
+@group
+@var{target} @dots{} : @var{prerequisites} @dots{}
+        @var{recipe}
+        @dots{}
+        @dots{}
+@end group
+@end example
+
+A @dfn{target} is usually the name of a file that is generated by a
+program; examples of targets are executable or object files.  A target
+can also be the name of an action to carry out, such as @samp{clean}
+(@pxref{Phony Targets}).
+
+A @dfn{prerequisite} is a file that is used as input to create the
+target.  A target often depends on several files.
+
+@cindex tabs in rules
+A @dfn{recipe} is an action that @code{make} carries out.  A recipe
+may have more than one command, either on the same line or each on its
+own line.  @strong{Please note:} you need to put a tab character at
+the beginning of every recipe line!  This is an obscurity that catches
+the unwary.  If you prefer to prefix your recipes with a character
+other than tab, you can set the @code{.RECIPEPREFIX} variable to an
+alternate character (@pxref{Special Variables}).
+
+Usually a recipe is in a rule with prerequisites and serves to create a
+target file if any of the prerequisites change.  However, the rule that
+specifies a recipe for the target need not have prerequisites.  For
+example, the rule containing the delete command associated with the
+target @samp{clean} does not have prerequisites.
+
+A @dfn{rule}, then, explains how and when to remake certain files
+which are the targets of the particular rule.  @code{make} carries out
+the recipe on the prerequisites to create or update the target.  A
+rule can also explain how and when to carry out an action.
+@xref{Rules, , Writing Rules}.
+
+A makefile may contain other text besides rules, but a simple makefile
+need only contain rules.  Rules may look somewhat more complicated
+than shown in this template, but all fit the pattern more or less.
+
+@node Simple Makefile, How Make Works, Rule Introduction, Introduction
+@section A Simple Makefile
+@cindex simple makefile
+@cindex makefile, simple
+
+Here is a straightforward makefile that describes the way an
+executable file called @code{edit} depends on eight object files
+which, in turn, depend on eight C source and three header files.
+
+In this example, all the C files include @file{defs.h}, but only those
+defining editing commands include @file{command.h}, and only low
+level files that change the editor buffer include @file{buffer.h}.
+
+@example
+@group
+edit : main.o kbd.o command.o display.o \
+       insert.o search.o files.o utils.o
+        cc -o edit main.o kbd.o command.o display.o \
+                   insert.o search.o files.o utils.o
+
+main.o : main.c defs.h
+        cc -c main.c
+kbd.o : kbd.c defs.h command.h
+        cc -c kbd.c
+command.o : command.c defs.h command.h
+        cc -c command.c
+display.o : display.c defs.h buffer.h
+        cc -c display.c
+insert.o : insert.c defs.h buffer.h
+        cc -c insert.c
+search.o : search.c defs.h buffer.h
+        cc -c search.c
+files.o : files.c defs.h buffer.h command.h
+        cc -c files.c
+utils.o : utils.c defs.h
+        cc -c utils.c
+clean :
+        rm edit main.o kbd.o command.o display.o \
+           insert.o search.o files.o utils.o
+@end group
+@end example
+
+@noindent
+We split each long line into two lines using backslash/newline; this is
+like using one long line, but is easier to read.  @xref{Splitting Lines,
+, Splitting Long Lines}.
+@cindex continuation lines
+@cindex @code{\} (backslash), for continuation lines
+@cindex backslash (@code{\}), for continuation lines
+@cindex quoting newline, in makefile
+@cindex newline, quoting, in makefile
+
+To use this makefile to create the executable file called @file{edit},
+type:
+
+@example
+make
+@end example
+
+To use this makefile to delete the executable file and all the object
+files from the directory, type:
+
+@example
+make clean
+@end example
+
+In the example makefile, the targets include the executable file
+@samp{edit}, and the object files @samp{main.o} and @samp{kbd.o}.  The
+prerequisites are files such as @samp{main.c} and @samp{defs.h}.
+In fact, each @samp{.o} file is both a target and a prerequisite.
+Recipes include @w{@samp{cc -c main.c}} and @w{@samp{cc -c kbd.c}}.
+
+When a target is a file, it needs to be recompiled or relinked if any
+of its prerequisites change.  In addition, any prerequisites that are
+themselves automatically generated should be updated first.  In this
+example, @file{edit} depends on each of the eight object files; the
+object file @file{main.o} depends on the source file @file{main.c} and
+on the header file @file{defs.h}.
+
+A recipe may follow each line that contains a target and
+prerequisites.  These recipes say how to update the target file.  A
+tab character (or whatever character is specified by the
+@code{.RECIPEPREFIX} variable; @pxref{Special Variables}) must come at
+the beginning of every line in the recipe to distinguish recipes from
+other lines in the makefile.  (Bear in mind that @code{make} does not
+know anything about how the recipes work.  It is up to you to supply
+recipes that will update the target file properly.  All @code{make}
+does is execute the recipe you have specified when the target file
+needs to be updated.)@refill
+@cindex recipe
+
+The target @samp{clean} is not a file, but merely the name of an
+action.  Since you normally do not want to carry out the actions in
+this rule, @samp{clean} is not a prerequisite of any other rule.
+Consequently, @code{make} never does anything with it unless you tell
+it specifically.  Note that this rule not only is not a prerequisite,
+it also does not have any prerequisites, so the only purpose of the
+rule is to run the specified recipe.  Targets that do not refer to
+files but are just actions are called @dfn{phony targets}.
+@xref{Phony Targets}, for information about this kind of target.
+@xref{Errors, , Errors in Recipes}, to see how to cause @code{make}
+to ignore errors from @code{rm} or any other command.
+@cindex @code{clean} target
+@cindex @code{rm} (shell command)
+
+@node How Make Works, Variables Simplify, Simple Makefile, Introduction
+@comment  node-name,  next,  previous,  up
+@section How @code{make} Processes a Makefile
+@cindex processing a makefile
+@cindex makefile, how @code{make} processes
+
+By default, @code{make} starts with the first target (not targets whose
+names start with @samp{.}).  This is called the @dfn{default goal}.
+(@dfn{Goals} are the targets that @code{make} strives ultimately to
+update.    You can override this behavior using the command line
+(@pxref{Goals, , Arguments to Specify the Goals}) or with the
+@code{.DEFAULT_GOAL} special variable (@pxref{Special Variables, ,
+Other Special Variables}).
+@cindex default goal
+@cindex goal, default
+@cindex goal
+
+In the simple example of the previous section, the default goal is to
+update the executable program @file{edit}; therefore, we put that rule
+first.
+
+Thus, when you give the command:
+
+@example
+make
+@end example
+
+@noindent
+@code{make} reads the makefile in the current directory and begins by
+processing the first rule.  In the example, this rule is for relinking
+@file{edit}; but before @code{make} can fully process this rule, it
+must process the rules for the files that @file{edit} depends on,
+which in this case are the object files.  Each of these files is
+processed according to its own rule.  These rules say to update each
+@samp{.o} file by compiling its source file.  The recompilation must
+be done if the source file, or any of the header files named as
+prerequisites, is more recent than the object file, or if the object
+file does not exist.
+
+The other rules are processed because their targets appear as
+prerequisites of the goal.  If some other rule is not depended on by the
+goal (or anything it depends on, etc.), that rule is not processed,
+unless you tell @code{make} to do so (with a command such as
+@w{@code{make clean}}).
+
+Before recompiling an object file, @code{make} considers updating its
+prerequisites, the source file and header files.  This makefile does not
+specify anything to be done for them---the @samp{.c} and @samp{.h} files
+are not the targets of any rules---so @code{make} does nothing for these
+files.  But @code{make} would update automatically generated C programs,
+such as those made by Bison or Yacc, by their own rules at this time.
+
+After recompiling whichever object files need it, @code{make} decides
+whether to relink @file{edit}.  This must be done if the file
+@file{edit} does not exist, or if any of the object files are newer than
+it.  If an object file was just recompiled, it is now newer than
+@file{edit}, so @file{edit} is relinked.
+@cindex relinking
+
+Thus, if we change the file @file{insert.c} and run @code{make},
+@code{make} will compile that file to update @file{insert.o}, and then
+link @file{edit}.  If we change the file @file{command.h} and run
+@code{make}, @code{make} will recompile the object files @file{kbd.o},
+@file{command.o} and @file{files.o} and then link the file @file{edit}.
+
+@node Variables Simplify, make Deduces, How Make Works, Introduction
+@section Variables Make Makefiles Simpler
+@cindex variables
+@cindex simplifying with variables
+
+In our example, we had to list all the object files twice in the rule for
+@file{edit} (repeated here):
+
+@example
+@group
+edit : main.o kbd.o command.o display.o \
+              insert.o search.o files.o utils.o
+        cc -o edit main.o kbd.o command.o display.o \
+                   insert.o search.o files.o utils.o
+@end group
+@end example
+
+@cindex @code{objects}
+Such duplication is error-prone; if a new object file is added to the
+system, we might add it to one list and forget the other.  We can eliminate
+the risk and simplify the makefile by using a variable.  @dfn{Variables}
+allow a text string to be defined once and substituted in multiple places
+later (@pxref{Using Variables, ,How to Use Variables}).
+
+@cindex @code{OBJECTS}
+@cindex @code{objs}
+@cindex @code{OBJS}
+@cindex @code{obj}
+@cindex @code{OBJ}
+It is standard practice for every makefile to have a variable named
+@code{objects}, @code{OBJECTS}, @code{objs}, @code{OBJS}, @code{obj},
+or @code{OBJ} which is a list of all object file names.  We would
+define such a variable @code{objects} with a line like this in the
+makefile:@refill
+
+@example
+@group
+objects = main.o kbd.o command.o display.o \
+          insert.o search.o files.o utils.o
+@end group
+@end example
+
+@noindent
+Then, each place we want to put a list of the object file names, we can
+substitute the variable's value by writing @samp{$(objects)}
+(@pxref{Using Variables, ,How to Use Variables}).
+
+Here is how the complete simple makefile looks when you use a variable
+for the object files:
+
+@example
+@group
+objects = main.o kbd.o command.o display.o \
+          insert.o search.o files.o utils.o
+
+edit : $(objects)
+        cc -o edit $(objects)
+main.o : main.c defs.h
+        cc -c main.c
+kbd.o : kbd.c defs.h command.h
+        cc -c kbd.c
+command.o : command.c defs.h command.h
+        cc -c command.c
+display.o : display.c defs.h buffer.h
+        cc -c display.c
+insert.o : insert.c defs.h buffer.h
+        cc -c insert.c
+search.o : search.c defs.h buffer.h
+        cc -c search.c
+files.o : files.c defs.h buffer.h command.h
+        cc -c files.c
+utils.o : utils.c defs.h
+        cc -c utils.c
+clean :
+        rm edit $(objects)
+@end group
+@end example
+
+@node make Deduces, Combine By Prerequisite, Variables Simplify, Introduction
+@section Letting @code{make} Deduce the Recipes
+@cindex deducing recipes (implicit rules)
+@cindex implicit rule, introduction to
+@cindex rule, implicit, introduction to
+
+It is not necessary to spell out the recipes for compiling the individual
+C source files, because @code{make} can figure them out: it has an
+@dfn{implicit rule} for updating a @samp{.o} file from a correspondingly
+named @samp{.c} file using a @samp{cc -c} command.  For example, it will
+use the recipe @samp{cc -c main.c -o main.o} to compile @file{main.c} into
+@file{main.o}.  We can therefore omit the recipes from the rules for the
+object files.  @xref{Implicit Rules, ,Using Implicit Rules}.@refill
+
+When a @samp{.c} file is used automatically in this way, it is also
+automatically added to the list of prerequisites.  We can therefore omit
+the @samp{.c} files from the prerequisites, provided we omit the recipe.
+
+Here is the entire example, with both of these changes, and a variable
+@code{objects} as suggested above:
+
+@example
+@group
+objects = main.o kbd.o command.o display.o \
+          insert.o search.o files.o utils.o
+
+edit : $(objects)
+        cc -o edit $(objects)
+
+main.o : defs.h
+kbd.o : defs.h command.h
+command.o : defs.h command.h
+display.o : defs.h buffer.h
+insert.o : defs.h buffer.h
+search.o : defs.h buffer.h
+files.o : defs.h buffer.h command.h
+utils.o : defs.h
+
+.PHONY : clean
+clean :
+        rm edit $(objects)
+@end group
+@end example
+
+@noindent
+This is how we would write the makefile in actual practice.  (The
+complications associated with @samp{clean} are described elsewhere.
+See @ref{Phony Targets}, and @ref{Errors, ,Errors in Recipes}.)
+
+Because implicit rules are so convenient, they are important.  You
+will see them used frequently.@refill
+
+@node Combine By Prerequisite, Cleanup, make Deduces, Introduction
+@section Another Style of Makefile
+@cindex combining rules by prerequisite
+
+When the objects of a makefile are created only by implicit rules, an
+alternative style of makefile is possible.  In this style of makefile,
+you group entries by their prerequisites instead of by their targets.
+Here is what one looks like:
+
+@example
+@group
+objects = main.o kbd.o command.o display.o \
+          insert.o search.o files.o utils.o
+
+edit : $(objects)
+        cc -o edit $(objects)
+
+$(objects) : defs.h
+kbd.o command.o files.o : command.h
+display.o insert.o search.o files.o : buffer.h
+@end group
+@end example
+
+@noindent
+Here @file{defs.h} is given as a prerequisite of all the object files;
+@file{command.h} and @file{buffer.h} are prerequisites of the specific
+object files listed for them.
+
+Whether this is better is a matter of taste: it is more compact, but some
+people dislike it because they find it clearer to put all the information
+about each target in one place.
+
+@node Cleanup,  , Combine By Prerequisite, Introduction
+@section Rules for Cleaning the Directory
+@cindex cleaning up
+@cindex removing, to clean up
+
+Compiling a program is not the only thing you might want to write rules
+for.  Makefiles commonly tell how to do a few other things besides
+compiling a program: for example, how to delete all the object files
+and executables so that the directory is @samp{clean}.
+
+@cindex @code{clean} target
+Here is how we
+could write a @code{make} rule for cleaning our example editor:
+
+@example
+@group
+clean:
+        rm edit $(objects)
+@end group
+@end example
+
+In practice, we might want to write the rule in a somewhat more
+complicated manner to handle unanticipated situations.  We would do this:
+
+@example
+@group
+.PHONY : clean
+clean :
+        -rm edit $(objects)
+@end group
+@end example
+
+@noindent
+This prevents @code{make} from getting confused by an actual file
+called @file{clean} and causes it to continue in spite of errors from
+@code{rm}.  (See @ref{Phony Targets}, and @ref{Errors, ,Errors in
+Recipes}.)
+
+@noindent
+A rule such as this should not be placed at the beginning of the
+makefile, because we do not want it to run by default!  Thus, in the
+example makefile, we want the rule for @code{edit}, which recompiles
+the editor, to remain the default goal.
+
+Since @code{clean} is not a prerequisite of @code{edit}, this rule will not
+run at all if we give the command @samp{make} with no arguments.  In
+order to make the rule run, we have to type @samp{make clean}.
+@xref{Running, ,How to Run @code{make}}.
+
+@node Makefiles, Rules, Introduction, Top
+@chapter Writing Makefiles
+
+@cindex makefile, how to write
+The information that tells @code{make} how to recompile a system comes from
+reading a data base called the @dfn{makefile}.
+
+@menu
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+@end menu
+
+@node Makefile Contents, Makefile Names, Makefiles, Makefiles
+@section What Makefiles Contain
+
+Makefiles contain five kinds of things: @dfn{explicit rules},
+@dfn{implicit rules}, @dfn{variable definitions}, @dfn{directives},
+and @dfn{comments}.  Rules, variables, and directives are described at
+length in later chapters.@refill
+
+@itemize @bullet
+@cindex rule, explicit, definition of
+@cindex explicit rule, definition of
+@item
+An @dfn{explicit rule} says when and how to remake one or more files,
+called the rule's @dfn{targets}.  It lists the other files that the
+targets depend on, called the @dfn{prerequisites} of the target, and
+may also give a recipe to use to create or update the targets.
+@xref{Rules, ,Writing Rules}.
+
+@cindex rule, implicit, definition of
+@cindex implicit rule, definition of
+@item
+An @dfn{implicit rule} says when and how to remake a class of files
+based on their names.  It describes how a target may depend on a file
+with a name similar to the target and gives a recipe to create or
+update such a target.  @xref{Implicit Rules, ,Using Implicit Rules}.
+
+@cindex variable definition
+@item
+A @dfn{variable definition} is a line that specifies a text string
+value for a variable that can be substituted into the text later.  The
+simple makefile example shows a variable definition for @code{objects}
+as a list of all object files (@pxref{Variables Simplify, , Variables
+Make Makefiles Simpler}).
+
+@cindex directive
+@item
+A @dfn{directive} is an instruction for @code{make} to do something
+special while reading the makefile.  These include:
+
+@itemize @bullet
+@item
+Reading another makefile (@pxref{Include, ,Including Other Makefiles}).
+
+@item
+Deciding (based on the values of variables) whether to use or
+ignore a part of the makefile (@pxref{Conditionals, ,Conditional Parts of Makefiles}).
+
+@item
+Defining a variable from a verbatim string containing multiple lines
+(@pxref{Multi-Line, ,Defining Multi-Line Variables}).
+@end itemize
+
+@cindex comments, in makefile
+@cindex @code{#} (comments), in makefile
+@item
+@samp{#} in a line of a makefile starts a @dfn{comment}.  It and the
+rest of the line are ignored, except that a trailing backslash not
+escaped by another backslash will continue the comment across multiple
+lines.  A line containing just a comment (with perhaps spaces before
+it) is effectively blank, and is ignored.  If you want a literal
+@code{#}, escape it with a backslash (e.g., @code{\#}).  Comments may
+appear on any line in the makefile, although they are treated
+specially in certain situations.
+
+You cannot use comments within variable references or function calls:
+any instance of @code{#} will be treated literally (rather than as the
+start of a comment) inside a variable reference or function call.
+
+Comments within a recipe are passed to the shell, just as with any
+other recipe text.  The shell decides how to interpret it: whether or
+not this is a comment is up to the shell.
+
+Within a @code{define} directive, comments are not ignored during the
+definition of the variable, but rather kept intact in the value of the
+variable.  When the variable is expanded they will either be treated
+as @code{make} comments or as recipe text, depending on the context in
+which the variable is evaluated.
+@end itemize
+
+@menu
+* Splitting Lines::             Splitting long lines in makefiles
+@end menu
+
+@node Splitting Lines,  , Makefile Contents, Makefile Contents
+@subsection Splitting Long Lines
+@cindex splitting long lines
+@cindex long lines, splitting
+@cindex backslash (@code{\}), to quote newlines
+
+Makefiles use a ``line-based'' syntax in which the newline character
+is special and marks the end of a statement.  GNU @code{make} has no
+limit on the length of a statement line, up to the amount of memory in
+your computer.
+
+However, it is difficult to read lines which are too long to display
+without wrapping or scrolling.  So, you can format your makefiles for
+readability by adding newlines into the middle of a statement: you do
+this by escaping the internal newlines with a backslash (@code{\})
+character.  Where we need to make a distinction we will refer to
+``physical lines'' as a single line ending with a newline (regardless
+of whether it is escaped) and a ``logical line'' being a complete
+statement including all escaped newlines up to the first non-escaped
+newline.
+
+The way in which backslash/newline combinations are handled depends on
+whether the statement is a recipe line or a non-recipe line.  Handling
+of backslash/newline in a recipe line is discussed later
+(@pxref{Splitting Recipe Lines}).
+
+Outside of recipe lines, backslash/newlines are converted into a
+single space character.  Once that is done, all whitespace around the
+backslash/newline is condensed into a single space: this includes all
+whitespace preceding the backslash, all whitespace at the beginning of
+the line after the backslash/newline, and any consecutive
+backslash/newline combinations.
+
+If the @code{.POSIX} special target is defined then backslash/newline
+handling is modified slightly to conform to POSIX.2: first, whitespace
+preceding a backslash is not removed and second, consecutive
+backslash/newlines are not condensed.
+
+@node Makefile Names, Include, Makefile Contents, Makefiles
+@section What Name to Give Your Makefile
+@cindex makefile name
+@cindex name of makefile
+@cindex default makefile name
+@cindex file name of makefile
+
+@c following paragraph rewritten to avoid overfull hbox
+By default, when @code{make} looks for the makefile, it tries the
+following names, in order: @file{GNUmakefile}, @file{makefile}
+and @file{Makefile}.@refill
+@findex Makefile
+@findex GNUmakefile
+@findex makefile
+
+@cindex @code{README}
+Normally you should call your makefile either @file{makefile} or
+@file{Makefile}.  (We recommend @file{Makefile} because it appears
+prominently near the beginning of a directory listing, right near other
+important files such as @file{README}.)  The first name checked,
+@file{GNUmakefile}, is not recommended for most makefiles.  You should
+use this name if you have a makefile that is specific to GNU
+@code{make}, and will not be understood by other versions of
+@code{make}.  Other @code{make} programs look for @file{makefile} and
+@file{Makefile}, but not @file{GNUmakefile}.
+
+If @code{make} finds none of these names, it does not use any makefile.
+Then you must specify a goal with a command argument, and @code{make}
+will attempt to figure out how to remake it using only its built-in
+implicit rules.  @xref{Implicit Rules, ,Using Implicit Rules}.
+
+@cindex @code{-f}
+@cindex @code{--file}
+@cindex @code{--makefile}
+If you want to use a nonstandard name for your makefile, you can specify
+the makefile name with the @samp{-f} or @samp{--file} option.  The
+arguments @w{@samp{-f @var{name}}} or @w{@samp{--file=@var{name}}} tell
+@code{make} to read the file @var{name} as the makefile.  If you use
+more than one @samp{-f} or @samp{--file} option, you can specify several
+makefiles.  All the makefiles are effectively concatenated in the order
+specified.  The default makefile names @file{GNUmakefile},
+@file{makefile} and @file{Makefile} are not checked automatically if you
+specify @samp{-f} or @samp{--file}.@refill
+@cindex specifying makefile name
+@cindex makefile name, how to specify
+@cindex name of makefile, how to specify
+@cindex file name of makefile, how to specify
+
+@node Include, MAKEFILES Variable, Makefile Names, Makefiles
+@section Including Other Makefiles
+@cindex including other makefiles
+@cindex makefile, including
+
+@findex include
+The @code{include} directive tells @code{make} to suspend reading the
+current makefile and read one or more other makefiles before continuing.
+The directive is a line in the makefile that looks like this:
+
+@example
+include @var{filenames}@dots{}
+@end example
+
+@noindent
+@var{filenames} can contain shell file name patterns.  If
+@var{filenames} is empty, nothing is included and no error is printed.
+@cindex shell file name pattern (in @code{include})
+@cindex shell wildcards (in @code{include})
+@cindex wildcard, in @code{include}
+
+Extra spaces are allowed and ignored at the beginning of the line, but
+the first character must not be a tab (or the value of
+@code{.RECIPEPREFIX})---if the line begins with a tab, it will be
+considered a recipe line.  Whitespace is required between
+@code{include} and the file names, and between file names; extra
+whitespace is ignored there and at the end of the directive.  A
+comment starting with @samp{#} is allowed at the end of the line.  If
+the file names contain any variable or function references, they are
+expanded.  @xref{Using Variables, ,How to Use Variables}.
+
+For example, if you have three @file{.mk} files, @file{a.mk},
+@file{b.mk}, and @file{c.mk}, and @code{$(bar)} expands to
+@code{bish bash}, then the following expression
+
+@example
+include foo *.mk $(bar)
+@end example
+
+is equivalent to
+
+@example
+include foo a.mk b.mk c.mk bish bash
+@end example
+
+When @code{make} processes an @code{include} directive, it suspends
+reading of the containing makefile and reads from each listed file in
+turn.  When that is finished, @code{make} resumes reading the
+makefile in which the directive appears.
+
+One occasion for using @code{include} directives is when several programs,
+handled by individual makefiles in various directories, need to use a
+common set of variable definitions
+(@pxref{Setting, ,Setting Variables}) or pattern rules
+(@pxref{Pattern Rules, ,Defining and Redefining Pattern Rules}).
+
+Another such occasion is when you want to generate prerequisites from
+source files automatically; the prerequisites can be put in a file that
+is included by the main makefile.  This practice is generally cleaner
+than that of somehow appending the prerequisites to the end of the main
+makefile as has been traditionally done with other versions of
+@code{make}.  @xref{Automatic Prerequisites}.
+@cindex prerequisites, automatic generation
+@cindex automatic generation of prerequisites
+@cindex generating prerequisites automatically
+
+@cindex @code{-I}
+@cindex @code{--include-dir}
+@cindex included makefiles, default directories
+@cindex default directories for included makefiles
+@findex /usr/gnu/include
+@findex /usr/local/include
+@findex /usr/include
+If the specified name does not start with a slash, and the file is not
+found in the current directory, several other directories are searched.
+First, any directories you have specified with the @samp{-I} or
+@samp{--include-dir} option are searched
+(@pxref{Options Summary, ,Summary of Options}).
+Then the following directories (if they exist)
+are searched, in this order:
+@file{@var{prefix}/include} (normally @file{/usr/local/include}
+@footnote{GNU Make compiled for MS-DOS and MS-Windows behaves as if
+@var{prefix} has been defined to be the root of the DJGPP tree
+hierarchy.})
+@file{/usr/gnu/include},
+@file{/usr/local/include}, @file{/usr/include}.
+
+If an included makefile cannot be found in any of these directories, a
+warning message is generated, but it is not an immediately fatal error;
+processing of the makefile containing the @code{include} continues.
+Once it has finished reading makefiles, @code{make} will try to remake
+any that are out of date or don't exist.
+@xref{Remaking Makefiles, ,How Makefiles Are Remade}.
+Only after it has tried to find a way to remake a makefile and failed,
+will @code{make} diagnose the missing makefile as a fatal error.
+
+If you want @code{make} to simply ignore a makefile which does not exist
+or cannot be remade, with no error message, use the @w{@code{-include}}
+directive instead of @code{include}, like this:
+
+@example
+-include @var{filenames}@dots{}
+@end example
+
+This acts like @code{include} in every way except that there is no
+error (not even a warning) if any of the @var{filenames} (or any
+prerequisites of any of the @var{filenames}) do not exist or cannot be
+remade.
+
+For compatibility with some other @code{make} implementations,
+@code{sinclude} is another name for @w{@code{-include}}.
+
+@node MAKEFILES Variable, Remaking Makefiles, Include, Makefiles
+@section The Variable @code{MAKEFILES}
+@cindex makefile, and @code{MAKEFILES} variable
+@cindex including (@code{MAKEFILES} variable)
+
+@vindex MAKEFILES
+If the environment variable @code{MAKEFILES} is defined, @code{make}
+considers its value as a list of names (separated by whitespace) of
+additional makefiles to be read before the others.  This works much
+like the @code{include} directive: various directories are searched
+for those files (@pxref{Include, ,Including Other Makefiles}).  In
+addition, the default goal is never taken from one of these makefiles
+(or any makefile included by them) and it is not an error if the files
+listed in @code{MAKEFILES} are not found.@refill
+
+@cindex recursion, and @code{MAKEFILES} variable
+The main use of @code{MAKEFILES} is in communication between recursive
+invocations of @code{make} (@pxref{Recursion, ,Recursive Use of
+@code{make}}).  It usually is not desirable to set the environment
+variable before a top-level invocation of @code{make}, because it is
+usually better not to mess with a makefile from outside.  However, if
+you are running @code{make} without a specific makefile, a makefile in
+@code{MAKEFILES} can do useful things to help the built-in implicit
+rules work better, such as defining search paths (@pxref{Directory Search}).
+
+Some users are tempted to set @code{MAKEFILES} in the environment
+automatically on login, and program makefiles to expect this to be done.
+This is a very bad idea, because such makefiles will fail to work if run by
+anyone else.  It is much better to write explicit @code{include} directives
+in the makefiles.  @xref{Include, , Including Other Makefiles}.
+
+@node Remaking Makefiles, Overriding Makefiles, MAKEFILES Variable, Makefiles
+@section How Makefiles Are Remade
+@cindex updating makefiles
+@cindex remaking makefiles
+@cindex makefile, remaking of
+Sometimes makefiles can be remade from other files, such as RCS or SCCS
+files.  If a makefile can be remade from other files, you probably want
+@code{make} to get an up-to-date version of the makefile to read in.
+
+To this end, after reading in all makefiles, @code{make} will consider
+each as a goal target and attempt to update it.  If a makefile has a
+rule which says how to update it (found either in that very makefile or
+in another one) or if an implicit rule applies to it (@pxref{Implicit
+Rules, ,Using Implicit Rules}), it will be updated if necessary.  After
+all makefiles have been checked, if any have actually been changed,
+@code{make} starts with a clean slate and reads all the makefiles over
+again.  (It will also attempt to update each of them over again, but
+normally this will not change them again, since they are already up to
+date.)@refill
+
+If you know that one or more of your makefiles cannot be remade and
+you want to keep @code{make} from performing an implicit rule search
+on them, perhaps for efficiency reasons, you can use any normal method
+of preventing implicit rule look-up to do so.  For example, you can
+write an explicit rule with the makefile as the target, and an empty
+recipe (@pxref{Empty Recipes, ,Using Empty Recipes}).
+
+If the makefiles specify a double-colon rule to remake a file with
+a recipe but no prerequisites, that file will always be remade
+(@pxref{Double-Colon}).  In the case of makefiles, a makefile that has a
+double-colon rule with a recipe but no prerequisites will be remade every
+time @code{make} is run, and then again after @code{make} starts over
+and reads the makefiles in again.  This would cause an infinite loop:
+@code{make} would constantly remake the makefile, and never do anything
+else.  So, to avoid this, @code{make} will @strong{not} attempt to
+remake makefiles which are specified as targets of a double-colon rule
+with a recipe but no prerequisites.@refill
+
+If you do not specify any makefiles to be read with @samp{-f} or
+@samp{--file} options, @code{make} will try the default makefile names;
+@pxref{Makefile Names, ,What Name to Give Your Makefile}.  Unlike
+makefiles explicitly requested with @samp{-f} or @samp{--file} options,
+@code{make} is not certain that these makefiles should exist.  However,
+if a default makefile does not exist but can be created by running
+@code{make} rules, you probably want the rules to be run so that the
+makefile can be used.
+
+Therefore, if none of the default makefiles exists, @code{make} will try
+to make each of them in the same order in which they are searched for
+(@pxref{Makefile Names, ,What Name to Give Your Makefile})
+until it succeeds in making one, or it runs out of names to try.  Note
+that it is not an error if @code{make} cannot find or make any makefile;
+a makefile is not always necessary.@refill
+
+When you use the @samp{-t} or @samp{--touch} option
+(@pxref{Instead of Execution, ,Instead of Executing Recipes}),
+you would not want to use an out-of-date makefile to decide which
+targets to touch.  So the @samp{-t} option has no effect on updating
+makefiles; they are really updated even if @samp{-t} is specified.
+Likewise, @samp{-q} (or @samp{--question}) and @samp{-n} (or
+@samp{--just-print}) do not prevent updating of makefiles, because an
+out-of-date makefile would result in the wrong output for other targets.
+Thus, @samp{make -f mfile -n foo} will update @file{mfile}, read it in,
+and then print the recipe to update @file{foo} and its prerequisites
+without running it.  The recipe printed for @file{foo} will be the one
+specified in the updated contents of @file{mfile}.
+
+However, on occasion you might actually wish to prevent updating of even
+the makefiles.  You can do this by specifying the makefiles as goals in
+the command line as well as specifying them as makefiles.  When the
+makefile name is specified explicitly as a goal, the options @samp{-t}
+and so on do apply to them.
+
+Thus, @samp{make -f mfile -n mfile foo} would read the makefile
+@file{mfile}, print the recipe needed to update it without actually
+running it, and then print the recipe needed to update @file{foo}
+without running that.  The recipe for @file{foo} will be the one
+specified by the existing contents of @file{mfile}.
+
+@node Overriding Makefiles, Reading Makefiles, Remaking Makefiles, Makefiles
+@section Overriding Part of Another Makefile
+
+@cindex overriding makefiles
+@cindex makefile, overriding
+Sometimes it is useful to have a makefile that is mostly just like
+another makefile.  You can often use the @samp{include} directive to
+include one in the other, and add more targets or variable definitions.
+However, it is invalid for two makefiles to give different recipes for
+the same target.  But there is another way.
+
+@cindex match-anything rule, used to override
+In the containing makefile (the one that wants to include the other),
+you can use a match-anything pattern rule to say that to remake any
+target that cannot be made from the information in the containing
+makefile, @code{make} should look in another makefile.
+@xref{Pattern Rules}, for more information on pattern rules.
+
+For example, if you have a makefile called @file{Makefile} that says how
+to make the target @samp{foo} (and other targets), you can write a
+makefile called @file{GNUmakefile} that contains:
+
+@example
+foo:
+        frobnicate > foo
+
+%: force
+        @@$(MAKE) -f Makefile $@@
+force: ;
+@end example
+
+If you say @samp{make foo}, @code{make} will find @file{GNUmakefile},
+read it, and see that to make @file{foo}, it needs to run the recipe
+@samp{frobnicate > foo}.  If you say @samp{make bar}, @code{make} will
+find no way to make @file{bar} in @file{GNUmakefile}, so it will use the
+recipe from the pattern rule: @samp{make -f Makefile bar}.  If
+@file{Makefile} provides a rule for updating @file{bar}, @code{make}
+will apply the rule.  And likewise for any other target that
+@file{GNUmakefile} does not say how to make.
+
+The way this works is that the pattern rule has a pattern of just
+@samp{%}, so it matches any target whatever.  The rule specifies a
+prerequisite @file{force}, to guarantee that the recipe will be run even
+if the target file already exists.  We give the @file{force} target an
+empty recipe to prevent @code{make} from searching for an implicit rule to
+build it---otherwise it would apply the same match-anything rule to
+@file{force} itself and create a prerequisite loop!
+
+@node Reading Makefiles,  Secondary Expansion, Overriding Makefiles, Makefiles
+@section How @code{make} Reads a Makefile
+@cindex reading makefiles
+@cindex makefile, parsing
+
+GNU @code{make} does its work in two distinct phases.  During the first
+phase it reads all the makefiles, included makefiles, etc. and
+internalizes all the variables and their values, implicit and explicit
+rules, and constructs a dependency graph of all the targets and their
+prerequisites.  During the second phase, @code{make} uses these internal
+structures to determine what targets will need to be rebuilt and to
+invoke the rules necessary to do so.
+
+It's important to understand this two-phase approach because it has a
+direct impact on how variable and function expansion happens; this is
+often a source of some confusion when writing makefiles.  Here we will
+present a summary of the phases in which expansion happens for different
+constructs within the makefile.  We say that expansion is
+@dfn{immediate} if it happens during the first phase: in this case
+@code{make} will expand any variables or functions in that section of a
+construct as the makefile is parsed.  We say that expansion is
+@dfn{deferred} if expansion is not performed immediately.  Expansion of
+a deferred construct is not performed until either the construct appears
+later in an immediate context, or until the second phase.
+
+You may not be familiar with some of these constructs yet.  You can
+reference this section as you become familiar with them, in later
+chapters.
+
+@subheading Variable Assignment
+@cindex +=, expansion
+@cindex =, expansion
+@cindex ?=, expansion
+@cindex +=, expansion
+@cindex !=, expansion
+@cindex define, expansion
+
+Variable definitions are parsed as follows:
+
+@example
+@var{immediate} = @var{deferred}
+@var{immediate} ?= @var{deferred}
+@var{immediate} := @var{immediate}
+@var{immediate} ::= @var{immediate}
+@var{immediate} += @var{deferred} or @var{immediate}
+@var{immediate} != @var{immediate}
+
+define @var{immediate}
+  @var{deferred}
+endef
+
+define @var{immediate} =
+  @var{deferred}
+endef
+
+define @var{immediate} ?=
+  @var{deferred}
+endef
+
+define @var{immediate} :=
+  @var{immediate}
+endef
+
+define @var{immediate} ::=
+  @var{immediate}
+endef
+
+define @var{immediate} +=
+  @var{deferred} or @var{immediate}
+endef
+
+define @var{immediate} !=
+  @var{immediate}
+endef
+@end example
+
+For the append operator, @samp{+=}, the right-hand side is considered
+immediate if the variable was previously set as a simple variable
+(@samp{:=} or @samp{::=}), and deferred otherwise.
+
+For the shell assignment operator, @samp{!=}, the right-hand side is
+evaluated immediately and handed to the shell.  The result is stored in the
+variable named on the left, and that variable becomes a simple variable
+(and will thus be re-evaluated on each reference).
+
+@subheading Conditional Directives
+@cindex ifdef, expansion
+@cindex ifeq, expansion
+@cindex ifndef, expansion
+@cindex ifneq, expansion
+
+Conditional directives are parsed immediately.  This means, for
+example, that automatic variables cannot be used in conditional
+directives, as automatic variables are not set until the recipe for
+that rule is invoked.  If you need to use automatic variables in a
+conditional directive you @emph{must} move the condition into the
+recipe and use shell conditional syntax instead.
+
+@subheading Rule Definition
+@cindex target, expansion
+@cindex prerequisite, expansion
+@cindex implicit rule, expansion
+@cindex pattern rule, expansion
+@cindex explicit rule, expansion
+
+A rule is always expanded the same way, regardless of the form:
+
+@example
+@var{immediate} : @var{immediate} ; @var{deferred}
+        @var{deferred}
+@end example
+
+That is, the target and prerequisite sections are expanded immediately,
+and the recipe used to construct the target is always deferred.  This
+general rule is true for explicit rules, pattern rules, suffix rules,
+static pattern rules, and simple prerequisite definitions.
+
+@node Secondary Expansion, , Reading Makefiles, Makefiles
+@section Secondary Expansion
+@cindex secondary expansion
+@cindex expansion, secondary
+
+@findex .SECONDEXPANSION
+In the previous section we learned that GNU @code{make} works in two
+distinct phases: a read-in phase and a target-update phase
+(@pxref{Reading Makefiles, , How @code{make} Reads a Makefile}).  GNU
+make also has the ability to enable a @emph{second expansion} of the
+prerequisites (only) for some or all targets defined in the makefile.
+In order for this second expansion to occur, the special target
+@code{.SECONDEXPANSION} must be defined before the first prerequisite
+list that makes use of this feature.
+
+If that special target is defined then in between the two phases
+mentioned above, right at the end of the read-in phase, all the
+prerequisites of the targets defined after the special target are
+expanded a @emph{second time}.  In most circumstances this secondary
+expansion will have no effect, since all variable and function
+references will have been expanded during the initial parsing of the
+makefiles.  In order to take advantage of the secondary expansion
+phase of the parser, then, it's necessary to @emph{escape} the
+variable or function reference in the makefile.  In this case the
+first expansion merely un-escapes the reference but doesn't expand it,
+and expansion is left to the secondary expansion phase.  For example,
+consider this makefile:
+
+@example
+.SECONDEXPANSION:
+ONEVAR = onefile
+TWOVAR = twofile
+myfile: $(ONEVAR) $$(TWOVAR)
+@end example
+
+After the first expansion phase the prerequisites list of the
+@file{myfile} target will be @code{onefile} and @code{$(TWOVAR)}; the
+first (unescaped) variable reference to @var{ONEVAR} is expanded,
+while the second (escaped) variable reference is simply unescaped,
+without being recognized as a variable reference.  Now during the
+secondary expansion the first word is expanded again but since it
+contains no variable or function references it remains the value
+@file{onefile}, while the second word is now a normal reference to the
+variable @var{TWOVAR}, which is expanded to the value @file{twofile}.
+The final result is that there are two prerequisites, @file{onefile}
+and @file{twofile}.
+
+Obviously, this is not a very interesting case since the same result
+could more easily have been achieved simply by having both variables
+appear, unescaped, in the prerequisites list.  One difference becomes
+apparent if the variables are reset; consider this example:
+
+@example
+.SECONDEXPANSION:
+AVAR = top
+onefile: $(AVAR)
+twofile: $$(AVAR)
+AVAR = bottom
+@end example
+
+Here the prerequisite of @file{onefile} will be expanded immediately,
+and resolve to the value @file{top}, while the prerequisite of
+@file{twofile} will not be full expanded until the secondary expansion
+and yield a value of @file{bottom}.
+
+This is marginally more exciting, but the true power of this feature
+only becomes apparent when you discover that secondary expansions
+always take place within the scope of the automatic variables for that
+target.  This means that you can use variables such as @code{$@@},
+@code{$*}, etc. during the second expansion and they will have their
+expected values, just as in the recipe.  All you have to do is defer
+the expansion by escaping the @code{$}.  Also, secondary expansion
+occurs for both explicit and implicit (pattern) rules.  Knowing this,
+the possible uses for this feature increase dramatically.  For
+example:
+
+@example
+.SECONDEXPANSION:
+main_OBJS := main.o try.o test.o
+lib_OBJS := lib.o api.o
+
+main lib: $$($$@@_OBJS)
+@end example
+
+Here, after the initial expansion the prerequisites of both the
+@file{main} and @file{lib} targets will be @code{$($@@_OBJS)}.  During
+the secondary expansion, the @code{$@@} variable is set to the name of
+the target and so the expansion for the @file{main} target will yield
+@code{$(main_OBJS)}, or @code{main.o try.o test.o}, while the
+secondary expansion for the @file{lib} target will yield
+@code{$(lib_OBJS)}, or @code{lib.o api.o}.
+
+You can also mix in functions here, as long as they are properly escaped:
+
+@example
+main_SRCS := main.c try.c test.c
+lib_SRCS := lib.c api.c
+
+.SECONDEXPANSION:
+main lib: $$(patsubst %.c,%.o,$$($$@@_SRCS))
+@end example
+
+This version allows users to specify source files rather than object
+files, but gives the same resulting prerequisites list as the previous
+example.
+
+Evaluation of automatic variables during the secondary expansion
+phase, especially of the target name variable @code{$$@@}, behaves
+similarly to evaluation within recipes.  However, there are some
+subtle differences and ``corner cases'' which come into play for the
+different types of rule definitions that @code{make} understands.  The
+subtleties of using the different automatic variables are described
+below.
+
+@subheading Secondary Expansion of Explicit Rules
+@cindex secondary expansion and explicit rules
+@cindex explicit rules, secondary expansion of
+
+During the secondary expansion of explicit rules, @code{$$@@} and
+@code{$$%} evaluate, respectively, to the file name of the target and,
+when the target is an archive member, the target member name.  The
+@code{$$<} variable evaluates to the first prerequisite in the first
+rule for this target.  @code{$$^} and @code{$$+} evaluate to the list
+of all prerequisites of rules @emph{that have already appeared} for
+the same target (@code{$$+} with repetitions and @code{$$^}
+without).  The following example will help illustrate these behaviors:
+
+@example
+.SECONDEXPANSION:
+
+foo: foo.1 bar.1 $$< $$^ $$+    # line #1
+
+foo: foo.2 bar.2 $$< $$^ $$+    # line #2
+
+foo: foo.3 bar.3 $$< $$^ $$+    # line #3
+@end example
+
+In the first prerequisite list, all three variables (@code{$$<},
+@code{$$^}, and @code{$$+}) expand to the empty string.  In the
+second, they will have values @code{foo.1}, @code{foo.1 bar.1}, and
+@code{foo.1 bar.1} respectively.  In the third they will have values
+@code{foo.1}, @code{foo.1 bar.1 foo.2 bar.2}, and @code{foo.1 bar.1
+foo.2 bar.2 foo.1 foo.1 bar.1 foo.1 bar.1} respectively.
+
+Rules undergo secondary expansion in makefile order, except that
+the rule with the recipe is always evaluated last.
+
+The variables @code{$$?} and @code{$$*} are not available and expand
+to the empty string.
+
+@subheading Secondary Expansion of Static Pattern Rules
+@cindex secondary expansion and static pattern rules
+@cindex static pattern rules, secondary expansion of
+
+Rules for secondary expansion of static pattern rules are identical to
+those for explicit rules, above, with one exception: for static
+pattern rules the @code{$$*} variable is set to the pattern stem.  As
+with explicit rules, @code{$$?} is not available and expands to the
+empty string.
+
+@subheading Secondary Expansion of Implicit Rules
+@cindex secondary expansion and implicit rules
+@cindex implicit rules, secondary expansion of
+
+As @code{make} searches for an implicit rule, it substitutes the stem
+and then performs secondary expansion for every rule with a matching
+target pattern.  The value of the automatic variables is derived in
+the same fashion as for static pattern rules.  As an example:
+
+@example
+.SECONDEXPANSION:
+
+foo: bar
+
+foo foz: fo%: bo%
+
+%oo: $$< $$^ $$+ $$*
+@end example
+
+When the implicit rule is tried for target @file{foo}, @code{$$<}
+expands to @file{bar}, @code{$$^} expands to @file{bar boo},
+@code{$$+} also expands to @file{bar boo}, and @code{$$*} expands to
+@file{f}.
+
+Note that the directory prefix (D), as described in @ref{Implicit Rule
+Search, ,Implicit Rule Search Algorithm}, is appended (after
+expansion) to all the patterns in the prerequisites list.  As an
+example:@refill
+
+@example
+.SECONDEXPANSION:
+
+/tmp/foo.o:
+
+%.o: $$(addsuffix /%.c,foo bar) foo.h
+        @@echo $^
+@end example
+
+The prerequisite list printed, after the secondary expansion and
+directory prefix reconstruction, will be @file{/tmp/foo/foo.c
+/tmp/bar/foo.c foo.h}.  If you are not interested in this
+reconstruction, you can use @code{$$*} instead of @code{%} in the
+prerequisites list.
+
+@node Rules, Recipes, Makefiles, Top
+@chapter Writing Rules
+@cindex writing rules
+@cindex rule, how to write
+@cindex target
+@cindex prerequisite
+
+A @dfn{rule} appears in the makefile and says when and how to remake
+certain files, called the rule's @dfn{targets} (most often only one per rule).
+It lists the other files that are the @dfn{prerequisites} of the target, and
+the @dfn{recipe} to use to create or update the target.
+
+@cindex default goal
+@cindex goal, default
+The order of rules is not significant, except for determining the
+@dfn{default goal}: the target for @code{make} to consider, if you do
+not otherwise specify one.  The default goal is the target of the first
+rule in the first makefile.  If the first rule has multiple targets,
+only the first target is taken as the default.  There are two
+exceptions: a target starting with a period is not a default unless it
+contains one or more slashes, @samp{/}, as well; and, a target that
+defines a pattern rule has no effect on the default goal.
+(@xref{Pattern Rules, ,Defining and Redefining Pattern Rules}.)
+
+Therefore, we usually write the makefile so that the first rule is the
+one for compiling the entire program or all the programs described by
+the makefile (often with a target called @samp{all}).
+@xref{Goals, ,Arguments to Specify the Goals}.
+
+@menu
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as `*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+@end menu
+
+@ifnottex
+@node Rule Example, Rule Syntax, Rules, Rules
+@section Rule Example
+
+Here is an example of a rule:
+
+@example
+foo.o : foo.c defs.h       # module for twiddling the frobs
+        cc -c -g foo.c
+@end example
+
+Its target is @file{foo.o} and its prerequisites are @file{foo.c} and
+@file{defs.h}.  It has one command in the recipe: @samp{cc -c -g foo.c}.
+The recipe starts with a tab to identify it as a recipe.
+
+This rule says two things:
+
+@itemize @bullet
+@item
+How to decide whether @file{foo.o} is out of date: it is out of date
+if it does not exist, or if either @file{foo.c} or @file{defs.h} is
+more recent than it.
+
+@item
+How to update the file @file{foo.o}: by running @code{cc} as stated.
+The recipe does not explicitly mention @file{defs.h}, but we presume
+that @file{foo.c} includes it, and that that is why @file{defs.h} was
+added to the prerequisites.
+@end itemize
+@end ifnottex
+
+@node Rule Syntax, Prerequisite Types, Rule Example, Rules
+@section Rule Syntax
+
+@cindex rule syntax
+@cindex syntax of rules
+In general, a rule looks like this:
+
+@example
+@var{targets} : @var{prerequisites}
+        @var{recipe}
+        @dots{}
+@end example
+
+@noindent
+or like this:
+
+@example
+@var{targets} : @var{prerequisites} ; @var{recipe}
+        @var{recipe}
+        @dots{}
+@end example
+
+@cindex targets
+@cindex rule targets
+The @var{targets} are file names, separated by spaces.  Wildcard
+characters may be used (@pxref{Wildcards, ,Using Wildcard Characters
+in File Names}) and a name of the form @file{@var{a}(@var{m})}
+represents member @var{m} in archive file @var{a}
+(@pxref{Archive Members, ,Archive Members as Targets}).
+Usually there is only one
+target per rule, but occasionally there is a reason to have more
+(@pxref{Multiple Targets, , Multiple Targets in a Rule}).@refill
+
+@cindex recipes
+@cindex tab character (in commands)
+The @var{recipe} lines start with a tab character (or the first
+character in the value of the @code{.RECIPEPREFIX} variable;
+@pxref{Special Variables}).  The first recipe line may appear on the line
+after the prerequisites, with a tab character, or may appear on the
+same line, with a semicolon.  Either way, the effect is the same.
+There are other differences in the syntax of recipes.
+@xref{Recipes, ,Writing Recipes in Rules}.
+
+@cindex dollar sign (@code{$}), in rules
+@cindex @code{$}, in rules
+@cindex rules, and @code{$}
+Because dollar signs are used to start @code{make} variable
+references, if you really want a dollar sign in a target or
+prerequisite you must write two of them, @samp{$$} (@pxref{Using
+Variables, ,How to Use Variables}).  If you have enabled secondary
+expansion (@pxref{Secondary Expansion}) and you want a literal dollar
+sign in the prerequisites list, you must actually write @emph{four}
+dollar signs (@samp{$$$$}).
+
+You may split a long line by inserting a backslash followed by a
+newline, but this is not required, as @code{make} places no limit on
+the length of a line in a makefile.
+
+A rule tells @code{make} two things: when the targets are out of date,
+and how to update them when necessary.
+
+@cindex prerequisites
+@cindex rule prerequisites
+The criterion for being out of date is specified in terms of the
+@var{prerequisites}, which consist of file names separated by spaces.
+(Wildcards and archive members (@pxref{Archives}) are allowed here too.)
+A target is out of date if it does not exist or if it is older than any
+of the prerequisites (by comparison of last-modification times).  The
+idea is that the contents of the target file are computed based on
+information in the prerequisites, so if any of the prerequisites changes,
+the contents of the existing target file are no longer necessarily
+valid.
+
+How to update is specified by a @var{recipe}.  This is one or more
+lines to be executed by the shell (normally @samp{sh}), but with some
+extra features (@pxref{Recipes, ,Writing Recipes in Rules}).
+
+@node Prerequisite Types, Wildcards, Rule Syntax, Rules
+@comment  node-name,  next,  previous,  up
+@section Types of Prerequisites
+@cindex prerequisite types
+@cindex types of prerequisites
+
+@cindex prerequisites, normal
+@cindex normal prerequisites
+@cindex prerequisites, order-only
+@cindex order-only prerequisites
+There are actually two different types of prerequisites understood by
+GNU @code{make}: normal prerequisites such as described in the
+previous section, and @dfn{order-only} prerequisites.  A normal
+prerequisite makes two statements: first, it imposes an order in which
+recipes will be invoked: the recipes for all prerequisites of a target
+will be completed before the recipe for the target is run.  Second, it
+imposes a dependency relationship: if any prerequisite is newer than
+the target, then the target is considered out-of-date and must be
+rebuilt.
+
+Normally, this is exactly what you want: if a target's prerequisite is
+updated, then the target should also be updated.
+
+Occasionally, however, you have a situation where you want to impose a
+specific ordering on the rules to be invoked @emph{without} forcing
+the target to be updated if one of those rules is executed.  In that
+case, you want to define @dfn{order-only} prerequisites.  Order-only
+prerequisites can be specified by placing a pipe symbol (@code{|})
+in the prerequisites list: any prerequisites to the left of the pipe
+symbol are normal; any prerequisites to the right are order-only:
+
+@example
+@var{targets} : @var{normal-prerequisites} | @var{order-only-prerequisites}
+@end example
+
+The normal prerequisites section may of course be empty.  Also, you
+may still declare multiple lines of prerequisites for the same target:
+they are appended appropriately (normal prerequisites are appended to
+the list of normal prerequisites; order-only prerequisites are
+appended to the list of order-only prerequisites).  Note that if you
+declare the same file to be both a normal and an order-only
+prerequisite, the normal prerequisite takes precedence (since they
+have a strict superset of the behavior of an order-only prerequisite).
+
+Consider an example where your targets are to be placed in a separate
+directory, and that directory might not exist before @code{make} is
+run.  In this situation, you want the directory to be created before
+any targets are placed into it but, because the timestamps on
+directories change whenever a file is added, removed, or renamed, we
+certainly don't want to rebuild all the targets whenever the
+directory's timestamp changes.  One way to manage this is with
+order-only prerequisites: make the directory an order-only
+prerequisite on all the targets:
+
+@example
+OBJDIR := objdir
+OBJS := $(addprefix $(OBJDIR)/,foo.o bar.o baz.o)
+
+$(OBJDIR)/%.o : %.c
+        $(COMPILE.c) $(OUTPUT_OPTION) $<
+
+all: $(OBJS)
+
+$(OBJS): | $(OBJDIR)
+
+$(OBJDIR):
+        mkdir $(OBJDIR)
+@end example
+
+Now the rule to create the @file{objdir} directory will be run, if
+needed, before any @samp{.o} is built, but no @samp{.o} will be built
+because the @file{objdir} directory timestamp changed.
+
+@node Wildcards, Directory Search, Prerequisite Types, Rules
+@section Using Wildcard Characters in File Names
+@cindex wildcard
+@cindex file name with wildcards
+@cindex globbing (wildcards)
+
+@cindex @code{*} (wildcard character)
+@cindex @code{?} (wildcard character)
+@cindex @code{[@dots{}]} (wildcard characters)
+A single file name can specify many files using @dfn{wildcard characters}.
+The wildcard characters in @code{make} are @samp{*}, @samp{?} and
+@samp{[@dots{}]}, the same as in the Bourne shell.  For example, @file{*.c}
+specifies a list of all the files (in the working directory) whose names
+end in @samp{.c}.@refill
+
+@cindex @code{~} (tilde)
+@cindex tilde (@code{~})
+@cindex home directory
+The character @samp{~} at the beginning of a file name also has special
+significance.  If alone, or followed by a slash, it represents your home
+directory.  For example @file{~/bin} expands to @file{/home/you/bin}.
+If the @samp{~} is followed by a word, the string represents the home
+directory of the user named by that word.  For example @file{~john/bin}
+expands to @file{/home/john/bin}.  On systems which don't have a home
+directory for each user (such as MS-DOS or MS-Windows), this
+functionality can be simulated by setting the environment variable
+@var{HOME}.@refill
+
+Wildcard expansion is performed by @code{make} automatically in
+targets and in prerequisites.  In recipes, the shell is responsible
+for wildcard expansion.  In other contexts, wildcard expansion happens
+only if you request it explicitly with the @code{wildcard} function.
+
+The special significance of a wildcard character can be turned off by
+preceding it with a backslash.  Thus, @file{foo\*bar} would refer to a
+specific file whose name consists of @samp{foo}, an asterisk, and
+@samp{bar}.@refill
+
+@menu
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+@end menu
+
+@node Wildcard Examples, Wildcard Pitfall, Wildcards, Wildcards
+@subsection Wildcard Examples
+
+Wildcards can be used in the recipe of a rule, where they are expanded
+by the shell.  For example, here is a rule to delete all the object files:
+
+@example
+@group
+clean:
+        rm -f *.o
+@end group
+@end example
+@cindex @code{rm} (shell command)
+
+Wildcards are also useful in the prerequisites of a rule.  With the
+following rule in the makefile, @samp{make print} will print all the
+@samp{.c} files that have changed since the last time you printed them:
+
+@example
+print: *.c
+        lpr -p $?
+        touch print
+@end example
+
+@cindex @code{print} target
+@cindex @code{lpr} (shell command)
+@cindex @code{touch} (shell command)
+@noindent
+This rule uses @file{print} as an empty target file; see @ref{Empty
+Targets, ,Empty Target Files to Record Events}.  (The automatic variable
+@samp{$?} is used to print only those files that have changed; see
+@ref{Automatic Variables}.)@refill
+
+Wildcard expansion does not happen when you define a variable.  Thus, if
+you write this:
+
+@example
+objects = *.o
+@end example
+
+@noindent
+then the value of the variable @code{objects} is the actual string
+@samp{*.o}.  However, if you use the value of @code{objects} in a
+target or prerequisite, wildcard expansion will take place there.  If
+you use the value of @code{objects} in a recipe, the shell may perform
+wildcard expansion when the recipe runs.  To set @code{objects} to the
+expansion, instead use:
+
+@example
+objects := $(wildcard *.o)
+@end example
+
+@noindent
+@xref{Wildcard Function}.
+
+@node Wildcard Pitfall, Wildcard Function, Wildcard Examples, Wildcards
+@subsection Pitfalls of Using Wildcards
+@cindex wildcard pitfalls
+@cindex pitfalls of wildcards
+@cindex mistakes with wildcards
+@cindex errors with wildcards
+@cindex problems with wildcards
+
+Now here is an example of a naive way of using wildcard expansion, that
+does not do what you would intend.  Suppose you would like to say that the
+executable file @file{foo} is made from all the object files in the
+directory, and you write this:
+
+@example
+objects = *.o
+
+foo : $(objects)
+        cc -o foo $(CFLAGS) $(objects)
+@end example
+
+@noindent
+The value of @code{objects} is the actual string @samp{*.o}.  Wildcard
+expansion happens in the rule for @file{foo}, so that each @emph{existing}
+@samp{.o} file becomes a prerequisite of @file{foo} and will be recompiled if
+necessary.
+
+But what if you delete all the @samp{.o} files?  When a wildcard matches
+no files, it is left as it is, so then @file{foo} will depend on the
+oddly-named file @file{*.o}.  Since no such file is likely to exist,
+@code{make} will give you an error saying it cannot figure out how to
+make @file{*.o}.  This is not what you want!
+
+Actually it is possible to obtain the desired result with wildcard
+expansion, but you need more sophisticated techniques, including the
+@code{wildcard} function and string substitution.
+@ifnottex
+@xref{Wildcard Function, ,The Function @code{wildcard}}.
+@end ifnottex
+@iftex
+These are described in the following section.
+@end iftex
+
+@cindex wildcards and MS-DOS/MS-Windows backslashes
+@cindex backslashes in pathnames and wildcard expansion
+
+Microsoft operating systems (MS-DOS and MS-Windows) use backslashes to
+separate directories in pathnames, like so:
+
+@example
+  c:\foo\bar\baz.c
+@end example
+
+This is equivalent to the Unix-style @file{c:/foo/bar/baz.c} (the
+@file{c:} part is the so-called drive letter).  When @code{make} runs on
+these systems, it supports backslashes as well as the Unix-style forward
+slashes in pathnames.  However, this support does @emph{not} include the
+wildcard expansion, where backslash is a quote character.  Therefore,
+you @emph{must} use Unix-style slashes in these cases.
+
+
+@node Wildcard Function,  , Wildcard Pitfall, Wildcards
+@subsection The Function @code{wildcard}
+@findex wildcard
+
+Wildcard expansion happens automatically in rules.  But wildcard expansion
+does not normally take place when a variable is set, or inside the
+arguments of a function.  If you want to do wildcard expansion in such
+places, you need to use the @code{wildcard} function, like this:
+
+@example
+$(wildcard @var{pattern}@dots{})
+@end example
+
+@noindent
+This string, used anywhere in a makefile, is replaced by a
+space-separated list of names of existing files that match one of the
+given file name patterns.  If no existing file name matches a pattern,
+then that pattern is omitted from the output of the @code{wildcard}
+function.  Note that this is different from how unmatched wildcards
+behave in rules, where they are used verbatim rather than ignored
+(@pxref{Wildcard Pitfall}).
+
+One use of the @code{wildcard} function is to get a list of all the C source
+files in a directory, like this:
+
+@example
+$(wildcard *.c)
+@end example
+
+We can change the list of C source files into a list of object files by
+replacing the @samp{.c} suffix with @samp{.o} in the result, like this:
+
+@example
+$(patsubst %.c,%.o,$(wildcard *.c))
+@end example
+
+@noindent
+(Here we have used another function, @code{patsubst}.
+@xref{Text Functions, ,Functions for String Substitution and Analysis}.)@refill
+
+Thus, a makefile to compile all C source files in the directory and then
+link them together could be written as follows:
+
+@example
+objects := $(patsubst %.c,%.o,$(wildcard *.c))
+
+foo : $(objects)
+        cc -o foo $(objects)
+@end example
+
+@noindent
+(This takes advantage of the implicit rule for compiling C programs, so
+there is no need to write explicit rules for compiling the files.
+@xref{Flavors, ,The Two Flavors of Variables}, for an explanation of
+@samp{:=}, which is a variant of @samp{=}.)
+
+@node Directory Search, Phony Targets, Wildcards, Rules
+@section Searching Directories for Prerequisites
+@vindex VPATH
+@findex vpath
+@cindex vpath
+@cindex search path for prerequisites (@code{VPATH})
+@cindex directory search (@code{VPATH})
+
+For large systems, it is often desirable to put sources in a separate
+directory from the binaries.  The @dfn{directory search} features of
+@code{make} facilitate this by searching several directories
+automatically to find a prerequisite.  When you redistribute the files
+among directories, you do not need to change the individual rules,
+just the search paths.
+
+@menu
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+@end menu
+
+@node General Search, Selective Search, Directory Search, Directory Search
+@subsection @code{VPATH}: Search Path for All Prerequisites
+@vindex VPATH
+
+The value of the @code{make} variable @code{VPATH} specifies a list of
+directories that @code{make} should search.  Most often, the
+directories are expected to contain prerequisite files that are not in the
+current directory; however, @code{make} uses @code{VPATH} as a search
+list for both prerequisites and targets of rules.
+
+Thus, if a file that is listed as a target or prerequisite does not exist
+in the current directory, @code{make} searches the directories listed in
+@code{VPATH} for a file with that name.  If a file is found in one of
+them, that file may become the prerequisite (see below).  Rules may then
+specify the names of files in the prerequisite list as if they all
+existed in the current directory.  @xref{Recipes/Search, ,Writing Recipes with Directory Search}.
+
+In the @code{VPATH} variable, directory names are separated by colons or
+blanks.  The order in which directories are listed is the order followed
+by @code{make} in its search.  (On MS-DOS and MS-Windows, semi-colons
+are used as separators of directory names in @code{VPATH}, since the
+colon can be used in the pathname itself, after the drive letter.)
+
+For example,
+
+@example
+VPATH = src:../headers
+@end example
+
+@noindent
+specifies a path containing two directories, @file{src} and
+@file{../headers}, which @code{make} searches in that order.
+
+With this value of @code{VPATH}, the following rule,
+
+@example
+foo.o : foo.c
+@end example
+
+@noindent
+is interpreted as if it were written like this:
+
+@example
+foo.o : src/foo.c
+@end example
+
+@noindent
+assuming the file @file{foo.c} does not exist in the current directory but
+is found in the directory @file{src}.
+
+@node Selective Search, Search Algorithm, General Search, Directory Search
+@subsection The @code{vpath} Directive
+@findex vpath
+
+Similar to the @code{VPATH} variable, but more selective, is the
+@code{vpath} directive (note lower case), which allows you to specify a
+search path for a particular class of file names: those that match a
+particular pattern.  Thus you can supply certain search directories for
+one class of file names and other directories (or none) for other file
+names.
+
+There are three forms of the @code{vpath} directive:
+
+@table @code
+@item vpath @var{pattern} @var{directories}
+Specify the search path @var{directories} for file names that match
+@var{pattern}.
+
+The search path, @var{directories}, is a list of directories to be
+searched, separated by colons (semi-colons on MS-DOS and MS-Windows) or
+blanks, just like the search path used in the @code{VPATH} variable.
+
+@item vpath @var{pattern}
+Clear out the search path associated with @var{pattern}.
+
+@c Extra blank line makes sure this gets two lines.
+@item vpath
+
+Clear all search paths previously specified with @code{vpath} directives.
+@end table
+
+A @code{vpath} pattern is a string containing a @samp{%} character.  The
+string must match the file name of a prerequisite that is being searched
+for, the @samp{%} character matching any sequence of zero or more
+characters (as in pattern rules; @pxref{Pattern Rules, ,Defining and
+Redefining Pattern Rules}).  For example, @code{%.h} matches files that
+end in @code{.h}.  (If there is no @samp{%}, the pattern must match the
+prerequisite exactly, which is not useful very often.)
+
+@cindex @code{%}, quoting in @code{vpath}
+@cindex @code{%}, quoting with @code{\} (backslash)
+@cindex @code{\} (backslash), to quote @code{%}
+@cindex backslash (@code{\}), to quote @code{%}
+@cindex quoting @code{%}, in @code{vpath}
+@samp{%} characters in a @code{vpath} directive's pattern can be quoted
+with preceding backslashes (@samp{\}).  Backslashes that would otherwise
+quote @samp{%} characters can be quoted with more backslashes.
+Backslashes that quote @samp{%} characters or other backslashes are
+removed from the pattern before it is compared to file names.  Backslashes
+that are not in danger of quoting @samp{%} characters go unmolested.@refill
+
+When a prerequisite fails to exist in the current directory, if the
+@var{pattern} in a @code{vpath} directive matches the name of the
+prerequisite file, then the @var{directories} in that directive are searched
+just like (and before) the directories in the @code{VPATH} variable.
+
+For example,
+
+@example
+vpath %.h ../headers
+@end example
+
+@noindent
+tells @code{make} to look for any prerequisite whose name ends in @file{.h}
+in the directory @file{../headers} if the file is not found in the current
+directory.
+
+If several @code{vpath} patterns match the prerequisite file's name, then
+@code{make} processes each matching @code{vpath} directive one by one,
+searching all the directories mentioned in each directive.  @code{make}
+handles multiple @code{vpath} directives in the order in which they
+appear in the makefile; multiple directives with the same pattern are
+independent of each other.
+
+@need 750
+Thus,
+
+@example
+@group
+vpath %.c foo
+vpath %   blish
+vpath %.c bar
+@end group
+@end example
+
+@noindent
+will look for a file ending in @samp{.c} in @file{foo}, then
+@file{blish}, then @file{bar}, while
+
+@example
+@group
+vpath %.c foo:bar
+vpath %   blish
+@end group
+@end example
+
+@noindent
+will look for a file ending in @samp{.c} in @file{foo}, then
+@file{bar}, then @file{blish}.
+
+@node Search Algorithm, Recipes/Search, Selective Search, Directory Search
+@subsection How Directory Searches are Performed
+@cindex algorithm for directory search
+@cindex directory search algorithm
+
+When a prerequisite is found through directory search, regardless of type
+(general or selective), the pathname located may not be the one that
+@code{make} actually provides you in the prerequisite list.  Sometimes
+the path discovered through directory search is thrown away.
+
+The algorithm @code{make} uses to decide whether to keep or abandon a
+path found via directory search is as follows:
+
+@enumerate
+@item
+If a target file does not exist at the path specified in the makefile,
+directory search is performed.
+
+@item
+If the directory search is successful, that path is kept and this file
+is tentatively stored as the target.
+
+@item
+All prerequisites of this target are examined using this same method.
+
+@item
+After processing the prerequisites, the target may or may not need to be
+rebuilt:
+
+@enumerate a
+@item
+If the target does @emph{not} need to be rebuilt, the path to the file
+found during directory search is used for any prerequisite lists which
+contain this target.  In short, if @code{make} doesn't need to rebuild
+the target then you use the path found via directory search.
+
+@item
+If the target @emph{does} need to be rebuilt (is out-of-date), the
+pathname found during directory search is @emph{thrown away}, and the
+target is rebuilt using the file name specified in the makefile.  In
+short, if @code{make} must rebuild, then the target is rebuilt locally,
+not in the directory found via directory search.
+@end enumerate
+@end enumerate
+
+This algorithm may seem complex, but in practice it is quite often
+exactly what you want.
+
+@cindex traditional directory search (GPATH)
+@cindex directory search, traditional (GPATH)
+Other versions of @code{make} use a simpler algorithm: if the file does
+not exist, and it is found via directory search, then that pathname is
+always used whether or not the target needs to be built.  Thus, if the
+target is rebuilt it is created at the pathname discovered during
+directory search.
+
+@vindex GPATH
+If, in fact, this is the behavior you want for some or all of your
+directories, you can use the @code{GPATH} variable to indicate this to
+@code{make}.
+
+@code{GPATH} has the same syntax and format as @code{VPATH} (that is, a
+space- or colon-delimited list of pathnames).  If an out-of-date target
+is found by directory search in a directory that also appears in
+@code{GPATH}, then that pathname is not thrown away.  The target is
+rebuilt using the expanded path.
+
+@node Recipes/Search, Implicit/Search, Search Algorithm, Directory Search
+@subsection Writing Recipes with Directory Search
+@cindex recipes, and directory search
+@cindex directory search (@code{VPATH}), and recipes
+
+When a prerequisite is found in another directory through directory search,
+this cannot change the recipe of the rule; they will execute as written.
+Therefore, you must write the recipe with care so that it will look for
+the prerequisite in the directory where @code{make} finds it.
+
+This is done with the @dfn{automatic variables} such as @samp{$^}
+(@pxref{Automatic Variables}).
+For instance, the value of @samp{$^} is a
+list of all the prerequisites of the rule, including the names of
+the directories in which they were found, and the value of
+@samp{$@@} is the target.  Thus:@refill
+
+@example
+foo.o : foo.c
+        cc -c $(CFLAGS) $^ -o $@@
+@end example
+
+@noindent
+(The variable @code{CFLAGS} exists so you can specify flags for C
+compilation by implicit rules; we use it here for consistency so it will
+affect all C compilations uniformly;
+@pxref{Implicit Variables, ,Variables Used by Implicit Rules}.)
+
+Often the prerequisites include header files as well, which you do not
+want to mention in the recipe.  The automatic variable @samp{$<} is
+just the first prerequisite:
+
+@example
+VPATH = src:../headers
+foo.o : foo.c defs.h hack.h
+        cc -c $(CFLAGS) $< -o $@@
+@end example
+
+@node Implicit/Search, Libraries/Search, Recipes/Search, Directory Search
+@subsection Directory Search and Implicit Rules
+@cindex @code{VPATH}, and implicit rules
+@cindex directory search (@code{VPATH}), and implicit rules
+@cindex search path for prerequisites (@code{VPATH}), and implicit rules
+@cindex implicit rule, and directory search
+@cindex implicit rule, and @code{VPATH}
+@cindex rule, implicit, and directory search
+@cindex rule, implicit, and @code{VPATH}
+
+The search through the directories specified in @code{VPATH} or with
+@code{vpath} also happens during consideration of implicit rules
+(@pxref{Implicit Rules, ,Using Implicit Rules}).
+
+For example, when a file @file{foo.o} has no explicit rule, @code{make}
+considers implicit rules, such as the built-in rule to compile
+@file{foo.c} if that file exists.  If such a file is lacking in the
+current directory, the appropriate directories are searched for it.  If
+@file{foo.c} exists (or is mentioned in the makefile) in any of the
+directories, the implicit rule for C compilation is applied.
+
+The recipes of implicit rules normally use automatic variables as a
+matter of necessity; consequently they will use the file names found by
+directory search with no extra effort.
+
+@node Libraries/Search,  , Implicit/Search, Directory Search
+@subsection Directory Search for Link Libraries
+@cindex link libraries, and directory search
+@cindex libraries for linking, directory search
+@cindex directory search (@code{VPATH}), and link libraries
+@cindex @code{VPATH}, and link libraries
+@cindex search path for prerequisites (@code{VPATH}), and link libraries
+@cindex @code{-l} (library search)
+@cindex link libraries, patterns matching
+@cindex @code{.LIBPATTERNS}, and link libraries
+@vindex .LIBPATTERNS
+
+Directory search applies in a special way to libraries used with the
+linker.  This special feature comes into play when you write a prerequisite
+whose name is of the form @samp{-l@var{name}}.  (You can tell something
+strange is going on here because the prerequisite is normally the name of a
+file, and the @emph{file name} of a library generally looks like
+@file{lib@var{name}.a}, not like @samp{-l@var{name}}.)@refill
+
+When a prerequisite's name has the form @samp{-l@var{name}}, @code{make}
+handles it specially by searching for the file @file{lib@var{name}.so},
+and, if it is not found, for the file @file{lib@var{name}.a} in the current
+directory, in directories specified by matching @code{vpath}
+search paths and the @code{VPATH} search path, and then in the
+directories @file{/lib}, @file{/usr/lib}, and @file{@var{prefix}/lib}
+(normally @file{/usr/local/lib}, but MS-DOS/MS-Windows versions of
+@code{make} behave as if @var{prefix} is defined to be the root of the
+DJGPP installation tree).
+
+For example, if there is a @file{/usr/lib/libcurses.a} library on your
+system (and no @file{/usr/lib/libcurses.so} file), then
+
+@example
+@group
+foo : foo.c -lcurses
+        cc $^ -o $@@
+@end group
+@end example
+
+@noindent
+would cause the command @samp{cc foo.c /usr/lib/libcurses.a -o foo} to
+be executed when @file{foo} is older than @file{foo.c} or than
+@file{/usr/lib/libcurses.a}.@refill
+
+Although the default set of files to be searched for is
+@file{lib@var{name}.so} and @file{lib@var{name}.a}, this is customizable
+via the @code{.LIBPATTERNS} variable.  Each word in the value of this
+variable is a pattern string.  When a prerequisite like
+@samp{-l@var{name}} is seen, @code{make} will replace the percent in
+each pattern in the list with @var{name} and perform the above directory
+searches using each library file name.
+
+The default value for @code{.LIBPATTERNS} is @samp{lib%.so lib%.a},
+which provides the default behavior described above.
+
+You can turn off link library expansion completely by setting this
+variable to an empty value.
+
+@node Phony Targets, Force Targets, Directory Search, Rules
+@section Phony Targets
+@cindex phony targets
+@cindex targets, phony
+@cindex targets without a file
+
+A phony target is one that is not really the name of a file; rather it
+is just a name for a recipe to be executed when you make an explicit
+request.  There are two reasons to use a phony target: to avoid a
+conflict with a file of the same name, and to improve performance.
+
+If you write a rule whose recipe will not create the target file, the
+recipe will be executed every time the target comes up for remaking.
+Here is an example:
+
+@example
+@group
+clean:
+        rm *.o temp
+@end group
+@end example
+
+@noindent
+Because the @code{rm} command does not create a file named @file{clean},
+probably no such file will ever exist.  Therefore, the @code{rm} command
+will be executed every time you say @samp{make clean}.
+@cindex @code{rm} (shell command)
+
+@findex .PHONY
+In this example, the @file{clean} target will not work properly if a
+file named @file{clean} is ever created in this directory.  Since it
+has no prerequisites, @file{clean} would always be considered up to
+date and its recipe would not be executed.  To avoid this problem you
+can explicitly declare the target to be phony by making it a
+prerequisite of the special target @code{.PHONY}
+(@pxref{Special Targets, ,Special Built-in Target Names}) as follows:
+
+@example
+@group
+.PHONY: clean
+clean:
+        rm *.o temp
+@end group
+@end example
+
+@noindent
+Once this is done, @samp{make clean} will run the recipe regardless of
+whether there is a file named @file{clean}.
+
+Phony targets are also useful in conjunction with recursive
+invocations of @code{make} (@pxref{Recursion, ,Recursive Use of @code{make}}).
+In this situation the makefile will often contain a variable which
+lists a number of sub-directories to be built.  A simplistic way to
+handle this is to define one rule with a recipe that loops over the
+sub-directories, like this:
+
+@example
+@group
+SUBDIRS = foo bar baz
+
+subdirs:
+        for dir in $(SUBDIRS); do \
+          $(MAKE) -C $$dir; \
+        done
+@end group
+@end example
+
+There are problems with this method, however.  First, any error
+detected in a sub-make is ignored by this rule, so it will continue
+to build the rest of the directories even when one fails.  This can be
+overcome by adding shell commands to note the error and exit, but then
+it will do so even if @code{make} is invoked with the @code{-k}
+option, which is unfortunate.  Second, and perhaps more importantly,
+you cannot take advantage of @code{make}'s ability to build targets in
+parallel (@pxref{Parallel, ,Parallel Execution}), since there is only
+one rule.
+
+By declaring the sub-directories as @code{.PHONY} targets (you must do
+this as the sub-directory obviously always exists; otherwise it won't
+be built) you can remove these problems:
+
+@example
+@group
+SUBDIRS = foo bar baz
+
+.PHONY: subdirs $(SUBDIRS)
+
+subdirs: $(SUBDIRS)
+
+$(SUBDIRS):
+        $(MAKE) -C $@@
+
+foo: baz
+@end group
+@end example
+
+Here we've also declared that the @file{foo} sub-directory cannot be
+built until after the @file{baz} sub-directory is complete; this kind of
+relationship declaration is particularly important when attempting
+parallel builds.
+
+The implicit rule search (@pxref{Implicit Rules}) is skipped for
+@code{.PHONY} targets.  This is why declaring a target as
+@code{.PHONY} is good for performance, even if you are not worried
+about the actual file existing.
+
+A phony target should not be a prerequisite of a real target file; if it
+is, its recipe will be run every time @code{make} goes to update that
+file.  As long as a phony target is never a prerequisite of a real
+target, the phony target recipe will be executed only when the phony
+target is a specified goal (@pxref{Goals, ,Arguments to Specify the
+Goals}).
+
+Phony targets can have prerequisites.  When one directory contains multiple
+programs, it is most convenient to describe all of the programs in one
+makefile @file{./Makefile}.  Since the target remade by default will be the
+first one in the makefile, it is common to make this a phony target named
+@samp{all} and give it, as prerequisites, all the individual programs.  For
+example:
+
+@example
+all : prog1 prog2 prog3
+.PHONY : all
+
+prog1 : prog1.o utils.o
+        cc -o prog1 prog1.o utils.o
+
+prog2 : prog2.o
+        cc -o prog2 prog2.o
+
+prog3 : prog3.o sort.o utils.o
+        cc -o prog3 prog3.o sort.o utils.o
+@end example
+
+@noindent
+Now you can say just @samp{make} to remake all three programs, or
+specify as arguments the ones to remake (as in @samp{make prog1
+prog3}).  Phoniness is not inherited: the prerequisites of a phony
+target are not themselves phony, unless explicitly declared to be so.
+
+When one phony target is a prerequisite of another, it serves as a subroutine
+of the other.  For example, here @samp{make cleanall} will delete the
+object files, the difference files, and the file @file{program}:
+
+@example
+.PHONY: cleanall cleanobj cleandiff
+
+cleanall : cleanobj cleandiff
+        rm program
+
+cleanobj :
+        rm *.o
+
+cleandiff :
+        rm *.diff
+@end example
+
+@node Force Targets, Empty Targets, Phony Targets, Rules
+@section Rules without Recipes or Prerequisites
+@cindex force targets
+@cindex targets, force
+@cindex @code{FORCE}
+@cindex rule, no recipe or prerequisites
+
+If a rule has no prerequisites or recipe, and the target of the rule
+is a nonexistent file, then @code{make} imagines this target to have
+been updated whenever its rule is run.  This implies that all targets
+depending on this one will always have their recipe run.
+
+An example will illustrate this:
+
+@example
+@group
+clean: FORCE
+        rm $(objects)
+FORCE:
+@end group
+@end example
+
+Here the target @samp{FORCE} satisfies the special conditions, so the
+target @file{clean} that depends on it is forced to run its recipe.
+There is nothing special about the name @samp{FORCE}, but that is one
+name commonly used this way.
+
+As you can see, using @samp{FORCE} this way has the same results as using
+@samp{.PHONY: clean}.
+
+Using @samp{.PHONY} is more explicit and more efficient.  However,
+other versions of @code{make} do not support @samp{.PHONY}; thus
+@samp{FORCE} appears in many makefiles.  @xref{Phony Targets}.
+
+@node Empty Targets, Special Targets, Force Targets, Rules
+@section Empty Target Files to Record Events
+@cindex empty targets
+@cindex targets, empty
+@cindex recording events with empty targets
+
+The @dfn{empty target} is a variant of the phony target; it is used to hold
+recipes for an action that you request explicitly from time to time.
+Unlike a phony target, this target file can really exist; but the file's
+contents do not matter, and usually are empty.
+
+The purpose of the empty target file is to record, with its
+last-modification time, when the rule's recipe was last executed.  It
+does so because one of the commands in the recipe is a @code{touch}
+command to update the target file.
+
+The empty target file should have some prerequisites (otherwise it
+doesn't make sense).  When you ask to remake the empty target, the
+recipe is executed if any prerequisite is more recent than the target;
+in other words, if a prerequisite has changed since the last time you
+remade the target.  Here is an example:
+
+@example
+print: foo.c bar.c
+        lpr -p $?
+        touch print
+@end example
+@cindex @code{print} target
+@cindex @code{lpr} (shell command)
+@cindex @code{touch} (shell command)
+
+@noindent
+With this rule, @samp{make print} will execute the @code{lpr} command if
+either source file has changed since the last @samp{make print}.  The
+automatic variable @samp{$?} is used to print only those files that have
+changed (@pxref{Automatic Variables}).
+
+@node Special Targets, Multiple Targets, Empty Targets, Rules
+@section Special Built-in Target Names
+@cindex special targets
+@cindex built-in special targets
+@cindex targets, built-in special
+
+Certain names have special meanings if they appear as targets.
+
+@table @code
+@findex .PHONY
+@item .PHONY
+
+The prerequisites of the special target @code{.PHONY} are considered to
+be phony targets.  When it is time to consider such a target,
+@code{make} will run its recipe unconditionally, regardless of
+whether a file with that name exists or what its last-modification
+time is.  @xref{Phony Targets, ,Phony Targets}.
+
+@findex .SUFFIXES
+@item .SUFFIXES
+
+The prerequisites of the special target @code{.SUFFIXES} are the list
+of suffixes to be used in checking for suffix rules.
+@xref{Suffix Rules, , Old-Fashioned Suffix Rules}.
+
+@findex .DEFAULT
+@item .DEFAULT
+
+The recipe specified for @code{.DEFAULT} is used for any target for
+which no rules are found (either explicit rules or implicit rules).
+@xref{Last Resort}.  If a @code{.DEFAULT} recipe is specified, every
+file mentioned as a prerequisite, but not as a target in a rule, will have
+that recipe executed on its behalf.  @xref{Implicit Rule Search,
+,Implicit Rule Search Algorithm}.
+
+@findex .PRECIOUS
+@item .PRECIOUS
+@cindex precious targets
+@cindex preserving with @code{.PRECIOUS}
+
+The targets which @code{.PRECIOUS} depends on are given the following
+special treatment: if @code{make} is killed or interrupted during the
+execution of their recipes, the target is not deleted.
+@xref{Interrupts, ,Interrupting or Killing @code{make}}.  Also, if the
+target is an intermediate file, it will not be deleted after it is no
+longer needed, as is normally done.  @xref{Chained Rules, ,Chains of
+Implicit Rules}.  In this latter respect it overlaps with the
+@code{.SECONDARY} special target.
+
+You can also list the target pattern of an implicit rule (such as
+@samp{%.o}) as a prerequisite file of the special target @code{.PRECIOUS}
+to preserve intermediate files created by rules whose target patterns
+match that file's name.
+
+@findex .INTERMEDIATE
+@item .INTERMEDIATE
+@cindex intermediate targets, explicit
+
+The targets which @code{.INTERMEDIATE} depends on are treated as
+intermediate files.  @xref{Chained Rules, ,Chains of Implicit Rules}.
+@code{.INTERMEDIATE} with no prerequisites has no effect.
+
+@findex .SECONDARY
+@item .SECONDARY
+@cindex secondary targets
+@cindex preserving with @code{.SECONDARY}
+
+The targets which @code{.SECONDARY} depends on are treated as
+intermediate files, except that they are never automatically deleted.
+@xref{Chained Rules, ,Chains of Implicit Rules}.
+
+@code{.SECONDARY} with no prerequisites causes all targets to be treated
+as secondary (i.e., no target is removed because it is considered
+intermediate).
+
+@findex .SECONDEXPANSION
+@item .SECONDEXPANSION
+
+If @code{.SECONDEXPANSION} is mentioned as a target anywhere in the
+makefile, then all prerequisite lists defined @emph{after} it appears
+will be expanded a second time after all makefiles have been read in.
+@xref{Secondary Expansion, ,Secondary Expansion}.
+
+@findex .DELETE_ON_ERROR
+@item .DELETE_ON_ERROR
+@cindex removing targets on failure
+
+If @code{.DELETE_ON_ERROR} is mentioned as a target anywhere in the
+makefile, then @code{make} will delete the target of a rule if it has
+changed and its recipe exits with a nonzero exit status, just as it
+does when it receives a signal.  @xref{Errors, ,Errors in Recipes}.
+
+@findex .IGNORE
+@item .IGNORE
+
+If you specify prerequisites for @code{.IGNORE}, then @code{make} will
+ignore errors in execution of the recipe for those particular files.
+The recipe for @code{.IGNORE} (if any) is ignored.
+
+If mentioned as a target with no prerequisites, @code{.IGNORE} says to
+ignore errors in execution of recipes for all files.  This usage of
+@samp{.IGNORE} is supported only for historical compatibility.  Since
+this affects every recipe in the makefile, it is not very useful; we
+recommend you use the more selective ways to ignore errors in specific
+recipes.  @xref{Errors, ,Errors in Recipes}.
+
+@findex .LOW_RESOLUTION_TIME
+@item .LOW_RESOLUTION_TIME
+
+If you specify prerequisites for @code{.LOW_RESOLUTION_TIME},
+@command{make} assumes that these files are created by commands that
+generate low resolution time stamps.  The recipe for the
+@code{.LOW_RESOLUTION_TIME} target are ignored.
+
+The high resolution file time stamps of many modern file systems
+lessen the chance of @command{make} incorrectly concluding that a file
+is up to date.  Unfortunately, some hosts do not provide a way to set a
+high resolution file time stamp, so commands like @samp{cp -p} that
+explicitly set a file's time stamp must discard its sub-second part.
+If a file is created by such a command, you should list it as a
+prerequisite of @code{.LOW_RESOLUTION_TIME} so that @command{make}
+does not mistakenly conclude that the file is out of date.  For
+example:
+
+@example
+@group
+.LOW_RESOLUTION_TIME: dst
+dst: src
+        cp -p src dst
+@end group
+@end example
+
+Since @samp{cp -p} discards the sub-second part of @file{src}'s time
+stamp, @file{dst} is typically slightly older than @file{src} even when
+it is up to date.  The @code{.LOW_RESOLUTION_TIME} line causes
+@command{make} to consider @file{dst} to be up to date if its time stamp
+is at the start of the same second that @file{src}'s time stamp is in.
+
+Due to a limitation of the archive format, archive member time stamps
+are always low resolution.  You need not list archive members as
+prerequisites of @code{.LOW_RESOLUTION_TIME}, as @command{make} does this
+automatically.
+
+@findex .SILENT
+@item .SILENT
+
+If you specify prerequisites for @code{.SILENT}, then @code{make} will
+not print the recipe used to remake those particular files before
+executing them.  The recipe for @code{.SILENT} is ignored.
+
+If mentioned as a target with no prerequisites, @code{.SILENT} says not
+to print any recipes before executing them.  This usage of
+@samp{.SILENT} is supported only for historical compatibility.  We
+recommend you use the more selective ways to silence specific recipes.
+@xref{Echoing, ,Recipe Echoing}.  If you want to silence all recipes
+for a particular run of @code{make}, use the @samp{-s} or
+@w{@samp{--silent}} option (@pxref{Options Summary}).
+
+@findex .EXPORT_ALL_VARIABLES
+@item .EXPORT_ALL_VARIABLES
+
+Simply by being mentioned as a target, this tells @code{make} to
+export all variables to child processes by default.
+@xref{Variables/Recursion, ,Communicating Variables to a
+Sub-@code{make}}.
+
+@findex .NOTPARALLEL
+@item .NOTPARALLEL
+@cindex parallel execution, overriding
+
+If @code{.NOTPARALLEL} is mentioned as a target, then this invocation
+of @code{make} will be run serially, even if the @samp{-j} option is
+given.  Any recursively invoked @code{make} command will still run
+recipes in parallel (unless its makefile also contains this target).
+Any prerequisites on this target are ignored.
+
+@findex .ONESHELL
+@item .ONESHELL
+@cindex recipe execution, single invocation
+
+If @code{.ONESHELL} is mentioned as a target, then when a target is
+built all lines of the recipe will be given to a single invocation of
+the shell rather than each line being invoked separately
+(@pxref{Execution, ,Recipe Execution}).
+
+@findex .POSIX
+@item .POSIX
+@cindex POSIX-conforming mode, setting
+
+If @code{.POSIX} is mentioned as a target, then the makefile will be
+parsed and run in POSIX-conforming mode.  This does @emph{not} mean
+that only POSIX-conforming makefiles will be accepted: all advanced
+GNU @code{make} features are still available.  Rather, this target
+causes @code{make} to behave as required by POSIX in those areas
+where @code{make}'s default behavior differs.
+
+In particular, if this target is mentioned then recipes will be
+invoked as if the shell had been passed the @code{-e} flag: the first
+failing command in a recipe will cause the recipe to fail immediately.
+@end table
+
+Any defined implicit rule suffix also counts as a special target if it
+appears as a target, and so does the concatenation of two suffixes, such
+as @samp{.c.o}.  These targets are suffix rules, an obsolete way of
+defining implicit rules (but a way still widely used).  In principle, any
+target name could be special in this way if you break it in two and add
+both pieces to the suffix list.  In practice, suffixes normally begin with
+@samp{.}, so these special target names also begin with @samp{.}.
+@xref{Suffix Rules, ,Old-Fashioned Suffix Rules}.
+
+@node Multiple Targets, Multiple Rules, Special Targets, Rules
+@section Multiple Targets in a Rule
+@cindex multiple targets
+@cindex several targets in a rule
+@cindex targets, multiple
+@cindex rule, with multiple targets
+
+A rule with multiple targets is equivalent to writing many rules, each with
+one target, and all identical aside from that.  The same recipe applies to
+all the targets, but its effect may vary because you can substitute the
+actual target name into the recipe using @samp{$@@}.  The rule contributes
+the same prerequisites to all the targets also.
+
+This is useful in two cases.
+
+@itemize @bullet
+@item
+You want just prerequisites, no recipe.  For example:
+
+@example
+kbd.o command.o files.o: command.h
+@end example
+
+@noindent
+gives an additional prerequisite to each of the three object files
+mentioned.
+
+@item
+Similar recipes work for all the targets.  The recipes do not need
+to be absolutely identical, since the automatic variable @samp{$@@}
+can be used to substitute the particular target to be remade into the
+commands (@pxref{Automatic Variables}).  For example:
+
+@example
+@group
+bigoutput littleoutput : text.g
+        generate text.g -$(subst output,,$@@) > $@@
+@end group
+@end example
+@findex subst
+
+@noindent
+is equivalent to
+
+@example
+bigoutput : text.g
+        generate text.g -big > bigoutput
+littleoutput : text.g
+        generate text.g -little > littleoutput
+@end example
+
+@noindent
+Here we assume the hypothetical program @code{generate} makes two
+types of output, one if given @samp{-big} and one if given
+@samp{-little}.
+@xref{Text Functions, ,Functions for String Substitution and Analysis},
+for an explanation of the @code{subst} function.
+@end itemize
+
+Suppose you would like to vary the prerequisites according to the
+target, much as the variable @samp{$@@} allows you to vary the recipe.
+You cannot do this with multiple targets in an ordinary rule, but you
+can do it with a @dfn{static pattern rule}.  @xref{Static Pattern,
+,Static Pattern Rules}.
+
+@node Multiple Rules, Static Pattern, Multiple Targets, Rules
+@section Multiple Rules for One Target
+@cindex multiple rules for one target
+@cindex several rules for one target
+@cindex rule, multiple for one target
+@cindex target, multiple rules for one
+
+One file can be the target of several rules.  All the prerequisites
+mentioned in all the rules are merged into one list of prerequisites for
+the target.  If the target is older than any prerequisite from any rule,
+the recipe is executed.
+
+There can only be one recipe to be executed for a file.  If more than
+one rule gives a recipe for the same file, @code{make} uses the last
+one given and prints an error message.  (As a special case, if the
+file's name begins with a dot, no error message is printed.  This odd
+behavior is only for compatibility with other implementations of
+@code{make}@dots{} you should avoid using it).  Occasionally it is
+useful to have the same target invoke multiple recipes which are
+defined in different parts of your makefile; you can use
+@dfn{double-colon rules} (@pxref{Double-Colon}) for this.
+
+An extra rule with just prerequisites can be used to give a few extra
+prerequisites to many files at once.  For example, makefiles often
+have a variable, such as @code{objects}, containing a list of all the
+compiler output files in the system being made.  An easy way to say
+that all of them must be recompiled if @file{config.h} changes is to
+write the following:
+
+@example
+objects = foo.o bar.o
+foo.o : defs.h
+bar.o : defs.h test.h
+$(objects) : config.h
+@end example
+
+This could be inserted or taken out without changing the rules that really
+specify how to make the object files, making it a convenient form to use if
+you wish to add the additional prerequisite intermittently.
+
+Another wrinkle is that the additional prerequisites could be
+specified with a variable that you set with a command line argument to
+@code{make} (@pxref{Overriding, ,Overriding Variables}).  For example,
+
+@example
+@group
+extradeps=
+$(objects) : $(extradeps)
+@end group
+@end example
+
+@noindent
+means that the command @samp{make extradeps=foo.h} will consider
+@file{foo.h} as a prerequisite of each object file, but plain @samp{make}
+will not.
+
+If none of the explicit rules for a target has a recipe, then @code{make}
+searches for an applicable implicit rule to find one
+@pxref{Implicit Rules, ,Using Implicit Rules}).
+
+@node Static Pattern, Double-Colon, Multiple Rules, Rules
+@section Static Pattern Rules
+@cindex static pattern rule
+@cindex rule, static pattern
+@cindex pattern rules, static (not implicit)
+@cindex varying prerequisites
+@cindex prerequisites, varying (static pattern)
+
+@dfn{Static pattern rules} are rules which specify multiple targets and
+construct the prerequisite names for each target based on the target name.
+They are more general than ordinary rules with multiple targets because the
+targets do not have to have identical prerequisites.  Their prerequisites must
+be @emph{analogous}, but not necessarily @emph{identical}.
+
+@menu
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+@end menu
+
+@node Static Usage, Static versus Implicit, Static Pattern, Static Pattern
+@subsection Syntax of Static Pattern Rules
+@cindex static pattern rule, syntax of
+@cindex pattern rules, static, syntax of
+
+Here is the syntax of a static pattern rule:
+
+@example
+@var{targets} @dots{}: @var{target-pattern}: @var{prereq-patterns} @dots{}
+        @var{recipe}
+        @dots{}
+@end example
+
+@noindent
+The @var{targets} list specifies the targets that the rule applies to.
+The targets can contain wildcard characters, just like the targets of
+ordinary rules (@pxref{Wildcards, ,Using Wildcard Characters in File
+Names}).
+
+@cindex target pattern, static (not implicit)
+@cindex stem
+The @var{target-pattern} and @var{prereq-patterns} say how to compute the
+prerequisites of each target.  Each target is matched against the
+@var{target-pattern} to extract a part of the target name, called the
+@dfn{stem}.  This stem is substituted into each of the @var{prereq-patterns}
+to make the prerequisite names (one from each @var{prereq-pattern}).
+
+Each pattern normally contains the character @samp{%} just once.  When the
+@var{target-pattern} matches a target, the @samp{%} can match any part of
+the target name; this part is called the @dfn{stem}.  The rest of the
+pattern must match exactly.  For example, the target @file{foo.o} matches
+the pattern @samp{%.o}, with @samp{foo} as the stem.  The targets
+@file{foo.c} and @file{foo.out} do not match that pattern.@refill
+
+@cindex prerequisite pattern, static (not implicit)
+The prerequisite names for each target are made by substituting the stem
+for the @samp{%} in each prerequisite pattern.  For example, if one
+prerequisite pattern is @file{%.c}, then substitution of the stem
+@samp{foo} gives the prerequisite name @file{foo.c}.  It is legitimate
+to write a prerequisite pattern that does not contain @samp{%}; then this
+prerequisite is the same for all targets.
+
+@cindex @code{%}, quoting in static pattern
+@cindex @code{%}, quoting with @code{\} (backslash)
+@cindex @code{\} (backslash), to quote @code{%}
+@cindex backslash (@code{\}), to quote @code{%}
+@cindex quoting @code{%}, in static pattern
+@samp{%} characters in pattern rules can be quoted with preceding
+backslashes (@samp{\}).  Backslashes that would otherwise quote @samp{%}
+characters can be quoted with more backslashes.  Backslashes that quote
+@samp{%} characters or other backslashes are removed from the pattern
+before it is compared to file names or has a stem substituted into it.
+Backslashes that are not in danger of quoting @samp{%} characters go
+unmolested.  For example, the pattern @file{the\%weird\\%pattern\\} has
+@samp{the%weird\} preceding the operative @samp{%} character, and
+@samp{pattern\\} following it.  The final two backslashes are left alone
+because they cannot affect any @samp{%} character.@refill
+
+Here is an example, which compiles each of @file{foo.o} and @file{bar.o}
+from the corresponding @file{.c} file:
+
+@example
+@group
+objects = foo.o bar.o
+
+all: $(objects)
+
+$(objects): %.o: %.c
+        $(CC) -c $(CFLAGS) $< -o $@@
+@end group
+@end example
+
+@noindent
+Here @samp{$<} is the automatic variable that holds the name of the
+prerequisite and @samp{$@@} is the automatic variable that holds the name
+of the target; see @ref{Automatic Variables}.
+
+Each target specified must match the target pattern; a warning is issued
+for each target that does not.  If you have a list of files, only some of
+which will match the pattern, you can use the @code{filter} function to
+remove non-matching file names (@pxref{Text Functions, ,Functions for String Substitution and Analysis}):
+
+@example
+files = foo.elc bar.o lose.o
+
+$(filter %.o,$(files)): %.o: %.c
+        $(CC) -c $(CFLAGS) $< -o $@@
+$(filter %.elc,$(files)): %.elc: %.el
+        emacs -f batch-byte-compile $<
+@end example
+
+@noindent
+In this example the result of @samp{$(filter %.o,$(files))} is
+@file{bar.o lose.o}, and the first static pattern rule causes each of
+these object files to be updated by compiling the corresponding C source
+file.  The result of @w{@samp{$(filter %.elc,$(files))}} is
+@file{foo.elc}, so that file is made from @file{foo.el}.@refill
+
+Another example shows how to use @code{$*} in static pattern rules:
+@vindex $*@r{, and static pattern}
+
+@example
+@group
+bigoutput littleoutput : %output : text.g
+        generate text.g -$* > $@@
+@end group
+@end example
+
+@noindent
+When the @code{generate} command is run, @code{$*} will expand to the
+stem, either @samp{big} or @samp{little}.
+
+@node Static versus Implicit,  , Static Usage, Static Pattern
+@subsection Static Pattern Rules versus Implicit Rules
+@cindex rule, static pattern versus implicit
+@cindex static pattern rule, versus implicit
+
+A static pattern rule has much in common with an implicit rule defined as a
+pattern rule (@pxref{Pattern Rules, ,Defining and Redefining Pattern Rules}).
+Both have a pattern for the target and patterns for constructing the
+names of prerequisites.  The difference is in how @code{make} decides
+@emph{when} the rule applies.
+
+An implicit rule @emph{can} apply to any target that matches its pattern,
+but it @emph{does} apply only when the target has no recipe otherwise
+specified, and only when the prerequisites can be found.  If more than one
+implicit rule appears applicable, only one applies; the choice depends on
+the order of rules.
+
+By contrast, a static pattern rule applies to the precise list of targets
+that you specify in the rule.  It cannot apply to any other target and it
+invariably does apply to each of the targets specified.  If two conflicting
+rules apply, and both have recipes, that's an error.
+
+The static pattern rule can be better than an implicit rule for these
+reasons:
+
+@itemize @bullet
+@item
+You may wish to override the usual implicit rule for a few
+files whose names cannot be categorized syntactically but
+can be given in an explicit list.
+
+@item
+If you cannot be sure of the precise contents of the directories
+you are using, you may not be sure which other irrelevant files
+might lead @code{make} to use the wrong implicit rule.  The choice
+might depend on the order in which the implicit rule search is done.
+With static pattern rules, there is no uncertainty: each rule applies
+to precisely the targets specified.
+@end itemize
+
+@node Double-Colon, Automatic Prerequisites, Static Pattern, Rules
+@section Double-Colon Rules
+@cindex double-colon rules
+@cindex rule, double-colon (@code{::})
+@cindex multiple rules for one target (@code{::})
+@cindex @code{::} rules (double-colon)
+
+@dfn{Double-colon} rules are explicit rules written with @samp{::}
+instead of @samp{:} after the target names.  They are handled
+differently from ordinary rules when the same target appears in more
+than one rule.  Pattern rules with double-colons have an entirely
+different meaning (@pxref{Match-Anything Rules}).
+
+When a target appears in multiple rules, all the rules must be the same
+type: all ordinary, or all double-colon.  If they are double-colon, each
+of them is independent of the others.  Each double-colon rule's recipe
+is executed if the target is older than any prerequisites of that rule.
+If there are no prerequisites for that rule, its recipe is always
+executed (even if the target already exists).  This can result in
+executing none, any, or all of the double-colon rules.
+
+Double-colon rules with the same target are in fact completely separate
+from one another.  Each double-colon rule is processed individually, just
+as rules with different targets are processed.
+
+The double-colon rules for a target are executed in the order they appear
+in the makefile.  However, the cases where double-colon rules really make
+sense are those where the order of executing the recipes would not matter.
+
+Double-colon rules are somewhat obscure and not often very useful; they
+provide a mechanism for cases in which the method used to update a target
+differs depending on which prerequisite files caused the update, and such
+cases are rare.
+
+Each double-colon rule should specify a recipe; if it does not, an
+implicit rule will be used if one applies.
+@xref{Implicit Rules, ,Using Implicit Rules}.
+
+@node Automatic Prerequisites,  , Double-Colon, Rules
+@section Generating Prerequisites Automatically
+@cindex prerequisites, automatic generation
+@cindex automatic generation of prerequisites
+@cindex generating prerequisites automatically
+
+In the makefile for a program, many of the rules you need to write often
+say only that some object file depends on some header
+file.  For example, if @file{main.c} uses @file{defs.h} via an
+@code{#include}, you would write:
+
+@example
+main.o: defs.h
+@end example
+
+@noindent
+You need this rule so that @code{make} knows that it must remake
+@file{main.o} whenever @file{defs.h} changes.  You can see that for a
+large program you would have to write dozens of such rules in your
+makefile.  And, you must always be very careful to update the makefile
+every time you add or remove an @code{#include}.
+@cindex @code{#include}
+
+@cindex @code{-M} (to compiler)
+To avoid this hassle, most modern C compilers can write these rules for
+you, by looking at the @code{#include} lines in the source files.
+Usually this is done with the @samp{-M} option to the compiler.
+For example, the command:
+
+@example
+cc -M main.c
+@end example
+
+@noindent
+generates the output:
+
+@example
+main.o : main.c defs.h
+@end example
+
+@noindent
+Thus you no longer have to write all those rules yourself.
+The compiler will do it for you.
+
+Note that such a rule constitutes mentioning @file{main.o} in a
+makefile, so it can never be considered an intermediate file by
+implicit rule search.  This means that @code{make} won't ever remove
+the file after using it; @pxref{Chained Rules, ,Chains of Implicit
+Rules}.
+
+@cindex @code{make depend}
+With old @code{make} programs, it was traditional practice to use this
+compiler feature to generate prerequisites on demand with a command like
+@samp{make depend}.  That command would create a file @file{depend}
+containing all the automatically-generated prerequisites; then the
+makefile could use @code{include} to read them in (@pxref{Include}).
+
+In GNU @code{make}, the feature of remaking makefiles makes this
+practice obsolete---you need never tell @code{make} explicitly to
+regenerate the prerequisites, because it always regenerates any makefile
+that is out of date.  @xref{Remaking Makefiles}.
+
+The practice we recommend for automatic prerequisite generation is to have
+one makefile corresponding to each source file.  For each source file
+@file{@var{name}.c} there is a makefile @file{@var{name}.d} which lists
+what files the object file @file{@var{name}.o} depends on.  That way
+only the source files that have changed need to be rescanned to produce
+the new prerequisites.
+
+Here is the pattern rule to generate a file of prerequisites (i.e., a makefile)
+called @file{@var{name}.d} from a C source file called @file{@var{name}.c}:
+
+@smallexample
+@group
+%.d: %.c
+        @@set -e; rm -f $@@; \
+         $(CC) -M $(CPPFLAGS) $< > $@@.$$$$; \
+         sed 's,\($*\)\.o[ :]*,\1.o $@@ : ,g' < $@@.$$$$ > $@@; \
+         rm -f $@@.$$$$
+@end group
+@end smallexample
+
+@noindent
+@xref{Pattern Rules}, for information on defining pattern rules.  The
+@samp{-e} flag to the shell causes it to exit immediately if the
+@code{$(CC)} command (or any other command) fails (exits with a
+nonzero status).
+@cindex @code{-e} (shell flag)
+
+@cindex @code{-MM} (to GNU compiler)
+With the GNU C compiler, you may wish to use the @samp{-MM} flag instead
+of @samp{-M}.  This omits prerequisites on system header files.
+@xref{Preprocessor Options, , Options Controlling the Preprocessor,
+gcc, Using GNU CC}, for details.
+
+@cindex @code{sed} (shell command)
+The purpose of the @code{sed} command is to translate (for example):
+
+@example
+main.o : main.c defs.h
+@end example
+
+@noindent
+into:
+
+@example
+main.o main.d : main.c defs.h
+@end example
+
+@noindent
+@cindex @code{.d}
+This makes each @samp{.d} file depend on all the source and header files
+that the corresponding @samp{.o} file depends on.  @code{make} then
+knows it must regenerate the prerequisites whenever any of the source or
+header files changes.
+
+Once you've defined the rule to remake the @samp{.d} files,
+you then use the @code{include} directive to read them all in.
+@xref{Include}.  For example:
+
+@example
+@group
+sources = foo.c bar.c
+
+include $(sources:.c=.d)
+@end group
+@end example
+
+@noindent
+(This example uses a substitution variable reference to translate the
+list of source files @samp{foo.c bar.c} into a list of prerequisite
+makefiles, @samp{foo.d bar.d}.  @xref{Substitution Refs}, for full
+information on substitution references.)  Since the @samp{.d} files are
+makefiles like any others, @code{make} will remake them as necessary
+with no further work from you.  @xref{Remaking Makefiles}.
+
+Note that the @samp{.d} files contain target definitions; you should
+be sure to place the @code{include} directive @emph{after} the first,
+default goal in your makefiles or run the risk of having a random
+object file become the default goal.
+@xref{How Make Works}.
+
+@node Recipes, Using Variables, Rules, Top
+@chapter Writing Recipes in Rules
+@cindex recipes
+@cindex recipes, how to write
+@cindex writing recipes
+
+The recipe of a rule consists of one or more shell command lines to
+be executed, one at a time, in the order they appear.  Typically, the
+result of executing these commands is that the target of the rule is
+brought up to date.
+
+Users use many different shell programs, but recipes in makefiles are
+always interpreted by @file{/bin/sh} unless the makefile specifies
+otherwise.  @xref{Execution, ,Recipe Execution}.
+
+@menu
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking @code{make} from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+@end menu
+
+@node Recipe Syntax, Echoing, Recipes, Recipes
+@section Recipe Syntax
+@cindex recipe syntax
+@cindex syntax of recipe
+
+Makefiles have the unusual property that there are really two distinct
+syntaxes in one file.  Most of the makefile uses @code{make} syntax
+(@pxref{Makefiles, ,Writing Makefiles}).  However, recipes are meant
+to be interpreted by the shell and so they are written using shell
+syntax.  The @code{make} program does not try to understand shell
+syntax: it performs only a very few specific translations on the
+content of the recipe before handing it to the shell.
+
+Each line in the recipe must start with a tab (or the first character
+in the value of the @code{.RECIPEPREFIX} variable; @pxref{Special
+Variables}), except that the first recipe line may be attached to the
+target-and-prerequisites line with a semicolon in between.  @emph{Any}
+line in the makefile that begins with a tab and appears in a ``rule
+context'' (that is, after a rule has been started until another rule
+or variable definition) will be considered part of a recipe for that
+rule.  Blank lines and lines of just comments may appear among the
+recipe lines; they are ignored.
+
+Some consequences of these rules include:
+
+@itemize @bullet
+@item
+A blank line that begins with a tab is not blank: it's an empty
+recipe (@pxref{Empty Recipes}).
+
+@cindex comments, in recipes
+@cindex recipes, comments in
+@cindex @code{#} (comments), in recipes
+@item
+A comment in a recipe is not a @code{make} comment; it will be
+passed to the shell as-is.  Whether the shell treats it as a comment
+or not depends on your shell.
+
+@item
+A variable definition in a ``rule context'' which is indented by a tab
+as the first character on the line, will be considered part of a
+recipe, not a @code{make} variable definition, and passed to the
+shell.
+
+@item
+A conditional expression (@code{ifdef}, @code{ifeq},
+etc. @pxref{Conditional Syntax, ,Syntax of Conditionals}) in a ``rule
+context'' which is indented by a tab as the first character on the
+line, will be considered part of a recipe and be passed to the shell.
+
+@end itemize
+
+@menu
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using @code{make} variables in recipes.
+@end menu
+
+@node Splitting Recipe Lines, Variables in Recipes, Recipe Syntax, Recipe Syntax
+@subsection Splitting Recipe Lines
+@cindex recipes, splitting
+@cindex splitting recipes
+@cindex recipes, backslash (@code{\}) in
+@cindex recipes, quoting newlines in
+@cindex backslash (@code{\}), in recipes
+@cindex @code{\} (backslash), in recipes
+@cindex quoting newline, in recipes
+@cindex newline, quoting, in recipes
+
+One of the few ways in which @code{make} does interpret recipes is
+checking for a backslash just before the newline.  As in normal
+makefile syntax, a single logical recipe line can be split into
+multiple physical lines in the makefile by placing a backslash before
+each newline.  A sequence of lines like this is considered a single
+recipe line, and one instance of the shell will be invoked to run it.
+
+However, in contrast to how they are treated in other places in a
+makefile (@pxref{Splitting Lines, , Splitting Long Lines}),
+backslash/newline pairs are @emph{not} removed from the recipe.  Both
+the backslash and the newline characters are preserved and passed to
+the shell.  How the backslash/newline is interpreted depends on your
+shell.  If the first character of the next line after the
+backslash/newline is the recipe prefix character (a tab by default;
+@pxref{Special Variables}), then that character (and only that
+character) is removed.  Whitespace is never added to the recipe.
+
+For example, the recipe for the all target in this makefile:
+
+@example
+@group
+all :
+        @@echo no\
+space
+        @@echo no\
+        space
+        @@echo one \
+        space
+        @@echo one\
+         space
+@end group
+@end example
+
+@noindent
+consists of four separate shell commands where the output is:
+
+@example
+@group
+nospace
+nospace
+one space
+one space
+@end group
+@end example
+
+As a more complex example, this makefile:
+
+@example
+@group
+all : ; @@echo 'hello \
+        world' ; echo "hello \
+    world"
+@end group
+@end example
+
+@noindent
+will invoke one shell with a command of:
+
+@example
+@group
+echo 'hello \
+world' ; echo "hello \
+    world"
+@end group
+@end example
+
+@noindent
+which, according to shell quoting rules, will yield the following output:
+
+@example
+@group
+hello \
+world
+hello     world
+@end group
+@end example
+
+@noindent
+Notice how the backslash/newline pair was removed inside the string
+quoted with double quotes (@code{"@dots{}"}), but not from the string
+quoted with single quotes (@code{'@dots{}'}).  This is the way the
+default shell (@file{/bin/sh}) handles backslash/newline pairs.  If
+you specify a different shell in your makefiles it may treat them
+differently.
+
+Sometimes you want to split a long line inside of single quotes, but
+you don't want the backslash/newline to appear in the quoted content.
+This is often the case when passing scripts to languages such as Perl,
+where extraneous backslashes inside the script can change its meaning
+or even be a syntax error.  One simple way of handling this is to
+place the quoted string, or even the entire command, into a
+@code{make} variable then use the variable in the recipe.  In this
+situation the newline quoting rules for makefiles will be used, and
+the backslash/newline will be removed.  If we rewrite our example
+above using this method:
+
+@example
+@group
+HELLO = 'hello \
+world'
+
+all : ; @@echo $(HELLO)
+@end group
+@end example
+
+@noindent
+we will get output like this:
+
+@example
+@group
+hello world
+@end group
+@end example
+
+If you like, you can also use target-specific variables
+(@pxref{Target-specific, ,Target-specific Variable Values}) to obtain
+a tighter correspondence between the variable and the recipe that
+uses it.
+
+@node Variables in Recipes,  , Splitting Recipe Lines, Recipe Syntax
+@subsection Using Variables in Recipes
+@cindex variable references in recipes
+@cindex recipes, using variables in
+
+The other way in which @code{make} processes recipes is by expanding
+any variable references in them (@pxref{Reference,Basics of Variable
+References}).  This occurs after make has finished reading all the
+makefiles and the target is determined to be out of date; so, the
+recipes for targets which are not rebuilt are never expanded.
+
+Variable and function references in recipes have identical syntax and
+semantics to references elsewhere in the makefile.  They also have the
+same quoting rules: if you want a dollar sign to appear in your
+recipe, you must double it (@samp{$$}).  For shells like the default
+shell, that use dollar signs to introduce variables, it's important to
+keep clear in your mind whether the variable you want to reference is
+a @code{make} variable (use a single dollar sign) or a shell variable
+(use two dollar signs).  For example:
+
+@example
+@group
+LIST = one two three
+all:
+        for i in $(LIST); do \
+            echo $$i; \
+        done
+@end group
+@end example
+
+@noindent
+results in the following command being passed to the shell:
+
+@example
+@group
+for i in one two three; do \
+    echo $i; \
+done
+@end group
+@end example
+
+@noindent
+which generates the expected result:
+
+@example
+@group
+one
+two
+three
+@end group
+@end example
+
+@node Echoing, Execution, Recipe Syntax, Recipes
+@section Recipe Echoing
+@cindex echoing of recipes
+@cindex silent operation
+@cindex @code{@@} (in recipes)
+@cindex recipes, echoing
+@cindex printing of recipes
+
+Normally @code{make} prints each line of the recipe before it is
+executed.  We call this @dfn{echoing} because it gives the appearance
+that you are typing the lines yourself.
+
+When a line starts with @samp{@@}, the echoing of that line is suppressed.
+The @samp{@@} is discarded before the line is passed to the shell.
+Typically you would use this for a command whose only effect is to print
+something, such as an @code{echo} command to indicate progress through
+the makefile:
+
+@example
+@@echo About to make distribution files
+@end example
+
+@cindex @code{-n}
+@cindex @code{--just-print}
+@cindex @code{--dry-run}
+@cindex @code{--recon}
+When @code{make} is given the flag @samp{-n} or @samp{--just-print} it
+only echoes most recipes, without executing them.  @xref{Options
+Summary, ,Summary of Options}.  In this case even the recipe lines
+starting with @samp{@@} are printed.  This flag is useful for finding
+out which recipes @code{make} thinks are necessary without actually
+doing them.
+
+@cindex @code{-s}
+@cindex @code{--silent}
+@cindex @code{--quiet}
+@findex .SILENT
+The @samp{-s} or @samp{--silent}
+flag to @code{make} prevents all echoing, as if all recipes
+started with @samp{@@}.  A rule in the makefile for the special target
+@code{.SILENT} without prerequisites has the same effect
+(@pxref{Special Targets, ,Special Built-in Target Names}).
+@code{.SILENT} is essentially obsolete since @samp{@@} is more flexible.@refill
+
+@node Execution, Parallel, Echoing, Recipes
+@section Recipe Execution
+@cindex recipe, execution
+@cindex execution, of recipes
+@vindex @code{SHELL} @r{(recipe execution)}
+
+When it is time to execute recipes to update a target, they are
+executed by invoking a new sub-shell for each line of the recipe,
+unless the @code{.ONESHELL} special target is in effect
+(@pxref{One Shell, ,Using One Shell})  (In practice, @code{make} may
+take shortcuts that do not affect the results.)
+
+@cindex @code{cd} (shell command)
+@cindex shell variables, setting in recipes
+@cindex recipes setting shell variables
+@strong{Please note:} this implies that setting shell variables and
+invoking shell commands such as @code{cd} that set a context local to
+each process will not affect the following lines in the recipe.@footnote{On
+MS-DOS, the value of current working directory is @strong{global}, so
+changing it @emph{will} affect the following recipe lines on those
+systems.}  If you want to use @code{cd} to affect the next statement,
+put both statements in a single recipe line.  Then @code{make} will
+invoke one shell to run the entire line, and the shell will execute
+the statements in sequence.  For example:
+
+@example
+foo : bar/lose
+        cd $(@@D) && gobble $(@@F) > ../$@@
+@end example
+
+@noindent
+Here we use the shell AND operator (@code{&&}) so that if the
+@code{cd} command fails, the script will fail without trying to invoke
+the @code{gobble} command in the wrong directory, which could cause
+problems (in this case it would certainly cause @file{../foo} to be
+truncated, at least).
+
+@menu
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How @code{make} chooses the shell used
+                                  to run recipes.
+@end menu
+
+@node One Shell, Choosing the Shell, Execution, Execution
+@subsection Using One Shell
+@cindex recipe lines, single shell
+@cindex @code{.ONESHELL}, use of
+@findex .ONESHELL
+
+Sometimes you would prefer that all the lines in the recipe be passed
+to a single invocation of the shell.  There are generally two
+situations where this is useful: first, it can improve performance in
+makefiles where recipes consist of many command lines, by avoiding
+extra processes.  Second, you might want newlines to be included in
+your recipe command (for example perhaps you are using a very
+different interpreter as your @code{SHELL}).  If the @code{.ONESHELL}
+special target appears anywhere in the makefile then @emph{all}
+recipe lines for each target will be provided to a single invocation
+of the shell.  Newlines between recipe lines will be preserved.  For
+example:
+
+@example
+.ONESHELL:
+foo : bar/lose
+        cd $(@@D)
+        gobble $(@@F) > ../$@@
+@end example
+
+@noindent
+would now work as expected even though the commands are on different
+recipe lines.
+
+If @code{.ONESHELL} is provided, then only the first line of the
+recipe will be checked for the special prefix characters (@samp{@@},
+@samp{-}, and @samp{+}).  Subsequent lines will include the special
+characters in the recipe line when the @code{SHELL} is invoked.  If
+you want your recipe to start with one of these special characters
+you'll need to arrange for them to not be the first characters on the
+first line, perhaps by adding a comment or similar.  For example, this
+would be a syntax error in Perl because the first @samp{@@} is removed
+by make:
+
+@example
+.ONESHELL:
+SHELL = /usr/bin/perl
+.SHELLFLAGS = -e
+show :
+        @@f = qw(a b c);
+        print "@@f\n";
+@end example
+
+@noindent
+However, either of these alternatives would work properly:
+
+@example
+.ONESHELL:
+SHELL = /usr/bin/perl
+.SHELLFLAGS = -e
+show :
+        # Make sure "@@" is not the first character on the first line
+        @@f = qw(a b c);
+        print "@@f\n";
+@end example
+
+@noindent
+or
+
+@example
+.ONESHELL:
+SHELL = /usr/bin/perl
+.SHELLFLAGS = -e
+show :
+        my @@f = qw(a b c);
+        print "@@f\n";
+@end example
+
+As a special feature, if @code{SHELL} is determined to be a
+POSIX-style shell, the special prefix characters in ``internal''
+recipe lines will @emph{removed} before the recipe is processed.  This
+feature is intended to allow existing makefiles to add the
+@code{.ONESHELL} special target and still run properly without
+extensive modifications.  Since the special prefix characters are not
+legal at the beginning of a line in a POSIX shell script this is not a
+loss in functionality.  For example, this works as expected:
+
+@example
+.ONESHELL:
+foo : bar/lose
+        @@cd $(@@D)
+        @@gobble $(@@F) > ../$@@
+@end example
+
+Even with this special feature, however, makefiles with
+@code{.ONESHELL} will behave differently in ways that could be
+noticeable.  For example, normally if any line in the recipe fails,
+that causes the rule to fail and no more recipe lines are processed.
+Under @code{.ONESHELL} a failure of any but the final recipe line will
+not be noticed by @code{make}.  You can modify @code{.SHELLFLAGS} to
+add the @code{-e} option to the shell which will cause any failure
+anywhere in the command line to cause the shell to fail, but this
+could itself cause your recipe to behave differently.  Ultimately you
+may need to harden your recipe lines to allow them to work with
+@code{.ONESHELL}.
+
+@node Choosing the Shell,  , One Shell, Execution
+@subsection Choosing the Shell
+@cindex shell, choosing the
+@cindex @code{SHELL}, value of
+@cindex @code{.SHELLFLAGS}, value of
+
+@vindex SHELL
+@vindex .SHELLFLAGS
+The program used as the shell is taken from the variable @code{SHELL}.
+If this variable is not set in your makefile, the program
+@file{/bin/sh} is used as the shell.  The argument(s) passed to the
+shell are taken from the variable @code{.SHELLFLAGS}.  The default
+value of @code{.SHELLFLAGS} is @code{-c} normally, or @code{-ec} in
+POSIX-conforming mode.
+
+@cindex environment, @code{SHELL} in
+Unlike most variables, the variable @code{SHELL} is never set from the
+environment.  This is because the @code{SHELL} environment variable is
+used to specify your personal choice of shell program for interactive
+use.  It would be very bad for personal choices like this to affect the
+functioning of makefiles.  @xref{Environment, ,Variables from the
+Environment}.
+
+Furthermore, when you do set @code{SHELL} in your makefile that value
+is @emph{not} exported in the environment to recipe lines that
+@code{make} invokes.  Instead, the value inherited from the user's
+environment, if any, is exported.  You can override this behavior by
+explicitly exporting @code{SHELL} (@pxref{Variables/Recursion,
+,Communicating Variables to a Sub-@code{make}}), forcing it to be
+passed in the environment to recipe lines.
+
+@vindex @code{MAKESHELL} @r{(MS-DOS alternative to @code{SHELL})}
+However, on MS-DOS and MS-Windows the value of @code{SHELL} in the
+environment @strong{is} used, since on those systems most users do not
+set this variable, and therefore it is most likely set specifically to
+be used by @code{make}.  On MS-DOS, if the setting of @code{SHELL} is
+not suitable for @code{make}, you can set the variable
+@code{MAKESHELL} to the shell that @code{make} should use; if set it
+will be used as the shell instead of the value of @code{SHELL}.
+
+@subsubheading Choosing a Shell in DOS and Windows
+@cindex shell, in DOS and Windows
+@cindex DOS, choosing a shell in
+@cindex Windows, choosing a shell in
+
+Choosing a shell in MS-DOS and MS-Windows is much more complex than on
+other systems.
+
+@vindex COMSPEC
+On MS-DOS, if @code{SHELL} is not set, the value of the variable
+@code{COMSPEC} (which is always set) is used instead.
+
+@cindex @code{SHELL}, MS-DOS specifics
+The processing of lines that set the variable @code{SHELL} in Makefiles
+is different on MS-DOS.  The stock shell, @file{command.com}, is
+ridiculously limited in its functionality and many users of @code{make}
+tend to install a replacement shell.  Therefore, on MS-DOS, @code{make}
+examines the value of @code{SHELL}, and changes its behavior based on
+whether it points to a Unix-style or DOS-style shell.  This allows
+reasonable functionality even if @code{SHELL} points to
+@file{command.com}.
+
+If @code{SHELL} points to a Unix-style shell, @code{make} on MS-DOS
+additionally checks whether that shell can indeed be found; if not, it
+ignores the line that sets @code{SHELL}.  In MS-DOS, GNU @code{make}
+searches for the shell in the following places:
+
+@enumerate
+@item
+In the precise place pointed to by the value of @code{SHELL}.  For
+example, if the makefile specifies @samp{SHELL = /bin/sh}, @code{make}
+will look in the directory @file{/bin} on the current drive.
+
+@item
+In the current directory.
+
+@item
+In each of the directories in the @code{PATH} variable, in order.
+
+@end enumerate
+
+In every directory it examines, @code{make} will first look for the
+specific file (@file{sh} in the example above).  If this is not found,
+it will also look in that directory for that file with one of the known
+extensions which identify executable files.  For example @file{.exe},
+@file{.com}, @file{.bat}, @file{.btm}, @file{.sh}, and some others.
+
+If any of these attempts is successful, the value of @code{SHELL} will
+be set to the full pathname of the shell as found.  However, if none of
+these is found, the value of @code{SHELL} will not be changed, and thus
+the line that sets it will be effectively ignored.  This is so
+@code{make} will only support features specific to a Unix-style shell if
+such a shell is actually installed on the system where @code{make} runs.
+
+Note that this extended search for the shell is limited to the cases
+where @code{SHELL} is set from the Makefile; if it is set in the
+environment or command line, you are expected to set it to the full
+pathname of the shell, exactly as things are on Unix.
+
+The effect of the above DOS-specific processing is that a Makefile that
+contains @samp{SHELL = /bin/sh} (as many Unix makefiles do), will work
+on MS-DOS unaltered if you have e.g.@: @file{sh.exe} installed in some
+directory along your @code{PATH}.
+
+@vindex SHELL
+@vindex .SHELLFLAGS
+
+@node Parallel, Errors, Execution, Recipes
+@section Parallel Execution
+@cindex recipes, execution in parallel
+@cindex parallel execution
+@cindex execution, in parallel
+@cindex job slots
+@cindex @code{-j}
+@cindex @code{--jobs}
+
+GNU @code{make} knows how to execute several recipes at once.
+Normally, @code{make} will execute only one recipe at a time, waiting
+for it to finish before executing the next.  However, the @samp{-j} or
+@samp{--jobs} option tells @code{make} to execute many recipes
+simultaneously.  You can inhibit parallelism in a particular makefile
+with the @code{.NOTPARALLEL} pseudo-target (@pxref{Special
+Targets,Special Built-in Target Names}).@refill
+
+On MS-DOS, the @samp{-j} option has no effect, since that system doesn't
+support multi-processing.
+
+If the @samp{-j} option is followed by an integer, this is the number of
+recipes to execute at once; this is called the number of @dfn{job slots}.
+If there is nothing looking like an integer after the @samp{-j} option,
+there is no limit on the number of job slots.  The default number of job
+slots is one, which means serial execution (one thing at a time).
+
+Handling recursive @code{make} invocations raises issues for parallel
+execution.  For more information on this, see @ref{Options/Recursion,
+,Communicating Options to a Sub-@code{make}}.
+
+If a recipe fails (is killed by a signal or exits with a nonzero
+status), and errors are not ignored for that recipe (@pxref{Errors,
+,Errors in Recipes}), the remaining recipe lines to remake the same
+target will not be run.  If a recipe fails and the @samp{-k} or
+@samp{--keep-going} option was not given (@pxref{Options Summary,
+,Summary of Options}), @code{make} aborts execution.  If make
+terminates for any reason (including a signal) with child processes
+running, it waits for them to finish before actually exiting.@refill
+
+@cindex load average
+@cindex limiting jobs based on load
+@cindex jobs, limiting based on load
+@cindex @code{-l} (load average)
+@cindex @code{--max-load}
+@cindex @code{--load-average}
+When the system is heavily loaded, you will probably want to run fewer jobs
+than when it is lightly loaded.  You can use the @samp{-l} option to tell
+@code{make} to limit the number of jobs to run at once, based on the load
+average.  The @samp{-l} or @samp{--max-load}
+option is followed by a floating-point number.  For
+example,
+
+@example
+-l 2.5
+@end example
+
+@noindent
+will not let @code{make} start more than one job if the load average is
+above 2.5.  The @samp{-l} option with no following number removes the
+load limit, if one was given with a previous @samp{-l} option.@refill
+
+More precisely, when @code{make} goes to start up a job, and it already has
+at least one job running, it checks the current load average; if it is not
+lower than the limit given with @samp{-l}, @code{make} waits until the load
+average goes below that limit, or until all the other jobs finish.
+
+By default, there is no load limit.
+
+@menu
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+@end menu
+
+@node Parallel Output, Parallel Input, Parallel, Parallel
+@subsection Output During Parallel Execution
+@cindex output during parallel execution
+@cindex parallel execution, output during
+
+When running several recipes in parallel the output from each
+recipe appears as soon as it is generated, with the result that
+messages from different recipes may be interspersed, sometimes even
+appearing on the same line.  This can make reading the output very
+difficult.
+
+@cindex @code{--output-sync}
+@cindex @code{-O}
+To avoid this you can use the @samp{--output-sync} (@samp{-O}) option.
+This option instructs @code{make} to save the output from the commands
+it invokes and print it all once the commands are completed.
+Additionally, if there are multiple recursive @code{make} invocations
+running in parallel, they will communicate so that only one of them is
+generating output at a time.
+
+If working directory printing is enabled (@pxref{-w Option, ,The
+@samp{--print-directory} Option}), the enter/leave messages are
+printed around each output grouping.  If you prefer not to see these
+messages add the @samp{--no-print-directory} option to @code{MAKEFLAGS}.
+
+There are four levels of granularity when synchronizing output,
+specified by giving an argument to the option (e.g.,  @samp{-Oline} or
+@samp{--output-sync=recurse}).
+
+@table @code
+@item none
+This is the default: all output is sent directly as it is generated and
+no synchronization is performed.
+
+@item line
+Output from each individual line of the recipe is grouped and printed
+as soon as that line is complete.  If a recipe consists of multiple
+lines, they may be interspersed with lines from other recipes.
+
+@item target
+Output from the entire recipe for each target is grouped and printed
+once the target is complete.  This is the default if the
+@code{--output-sync} or @code{-O} option is given with no argument.
+
+@item recurse
+Output from each recursive invocation of @code{make} is grouped and
+printed once the recursive invocation is complete.
+
+@end table
+
+Regardless of the mode chosen, the total build time will be the same.
+The only difference is in how the output appears.
+
+The @samp{target} and @samp{recurse} modes both collect the output of
+the entire recipe of a target and display it uninterrupted when the
+recipe completes.  The difference between them is in how recipes that
+contain recursive invocations of @code{make} are treated
+(@pxref{Recursion, ,Recursive Use of @code{make}}).  For all recipes
+which have no recursive lines, the @samp{target} and @samp{recurse}
+modes behave identically.
+
+If the @samp{recurse} mode is chosen, recipes that contain recursive
+@code{make} invocations are treated the same as other targets: the
+output from the recipe, including the output from the recursive
+@code{make}, is saved and printed after the entire recipe is complete.
+This ensures output from all the targets built by a given recursive
+@code{make} instance are grouped together, which may make the output
+easier to understand.  However it also leads to long periods of time
+during the build where no output is seen, followed by large bursts of
+output.  If you are not watching the build as it proceeds, but instead
+viewing a log of the build after the fact, this may be the best option
+for you.
+
+If you are watching the output, the long gaps of quiet during the
+build can be frustrating.  The @samp{target} output synchronization
+mode detects when @code{make} is going to be invoked recursively,
+using the standard methods, and it will not synchronize the output of
+those lines.  The recursive @code{make} will perform the
+synchronization for its targets and the output from each will be
+displayed immediately when it completes.  Be aware that output from
+recursive lines of the recipe are not synchronized (for example if
+the recursive line prints a message before running @code{make}, that
+message will not be synchronized).
+
+The @samp{line} mode can be useful for front-ends that are watching
+the output of @code{make} to track when recipes are started and
+completed.
+
+Some programs invoked by @code{make} may behave differently if they
+determine they're writing output to a terminal versus a file (often
+described as ``interactive'' vs. ``non-interactive'' modes).  For
+example, many programs that can display colorized output will not do
+so if they determine they are not writing to a terminal.  If your
+makefile invokes a program like this then using the output
+synchronization options will cause the program to believe it's running
+in ``non-interactive'' mode even though the output will ultimately go
+to the terminal.
+
+@node Parallel Input,  , Parallel Output, Parallel
+@subsection Input During Parallel Execution
+@cindex input during parallel execution
+@cindex parallel execution, input during
+@cindex standard input
+
+Two processes cannot both take input from the same device at the same
+time.  To make sure that only one recipe tries to take input from the
+terminal at once, @code{make} will invalidate the standard input
+streams of all but one running recipe.  If another recipe attempts to
+read from standard input it will usually incur a fatal error (a
+@samp{Broken pipe} signal).
+@cindex broken pipe
+
+It is unpredictable which recipe will have a valid standard input stream
+(which will come from the terminal, or wherever you redirect the standard
+input of @code{make}).  The first recipe run will always get it first, and
+the first recipe started after that one finishes will get it next, and so
+on.
+
+We will change how this aspect of @code{make} works if we find a better
+alternative.  In the mean time, you should not rely on any recipe using
+standard input at all if you are using the parallel execution feature; but
+if you are not using this feature, then standard input works normally in
+all recipes.
+
+@node Errors, Interrupts, Parallel, Recipes
+@section Errors in Recipes
+@cindex errors (in recipes)
+@cindex recipes, errors in
+@cindex exit status (errors)
+
+After each shell invocation returns, @code{make} looks at its exit
+status.  If the shell completed successfully (the exit status is
+zero), the next line in the recipe is executed in a new shell; after
+the last line is finished, the rule is finished.
+
+If there is an error (the exit status is nonzero), @code{make} gives up on
+the current rule, and perhaps on all rules.
+
+Sometimes the failure of a certain recipe line does not indicate a problem.
+For example, you may use the @code{mkdir} command to ensure that a
+directory exists.  If the directory already exists, @code{mkdir} will
+report an error, but you probably want @code{make} to continue regardless.
+
+@cindex @code{-} (in recipes)
+To ignore errors in a recipe line, write a @samp{-} at the beginning
+of the line's text (after the initial tab).  The @samp{-} is discarded
+before the line is passed to the shell for execution.
+
+For example,
+
+@example
+@group
+clean:
+        -rm -f *.o
+@end group
+@end example
+@cindex @code{rm} (shell command)
+
+@noindent
+This causes @code{make} to continue even if @code{rm} is unable to
+remove a file.
+
+@cindex @code{-i}
+@cindex @code{--ignore-errors}
+@findex .IGNORE
+When you run @code{make} with the @samp{-i} or @samp{--ignore-errors}
+flag, errors are ignored in all recipes of all rules.  A rule in the
+makefile for the special target @code{.IGNORE} has the same effect, if
+there are no prerequisites.  These ways of ignoring errors are obsolete
+because @samp{-} is more flexible.
+
+When errors are to be ignored, because of either a @samp{-} or the
+@samp{-i} flag, @code{make} treats an error return just like success,
+except that it prints out a message that tells you the status code
+the shell exited with, and says that the error has been ignored.
+
+When an error happens that @code{make} has not been told to ignore,
+it implies that the current target cannot be correctly remade, and neither
+can any other that depends on it either directly or indirectly.  No further
+recipes will be executed for these targets, since their preconditions
+have not been achieved.
+
+
+@cindex @code{-k}
+@cindex @code{--keep-going}
+Normally @code{make} gives up immediately in this circumstance, returning a
+nonzero status.  However, if the @samp{-k} or @samp{--keep-going}
+flag is specified, @code{make}
+continues to consider the other prerequisites of the pending targets,
+remaking them if necessary, before it gives up and returns nonzero status.
+For example, after an error in compiling one object file, @samp{make -k}
+will continue compiling other object files even though it already knows
+that linking them will be impossible.  @xref{Options Summary, ,Summary of Options}.
+
+The usual behavior assumes that your purpose is to get the specified
+targets up to date; once @code{make} learns that this is impossible, it
+might as well report the failure immediately.  The @samp{-k} option says
+that the real purpose is to test as many of the changes made in the
+program as possible, perhaps to find several independent problems so
+that you can correct them all before the next attempt to compile.  This
+is why Emacs' @code{compile} command passes the @samp{-k} flag by
+default.
+@cindex Emacs (@code{M-x compile})
+
+@findex .DELETE_ON_ERROR
+@cindex deletion of target files
+@cindex removal of target files
+@cindex target, deleting on error
+Usually when a recipe line fails, if it has changed the target file at all,
+the file is corrupted and cannot be used---or at least it is not
+completely updated.  Yet the file's time stamp says that it is now up to
+date, so the next time @code{make} runs, it will not try to update that
+file.  The situation is just the same as when the shell is killed by a
+signal; @pxref{Interrupts}.  So generally the right thing to do is to
+delete the target file if the recipe fails after beginning to change
+the file.  @code{make} will do this if @code{.DELETE_ON_ERROR} appears
+as a target.  This is almost always what you want @code{make} to do, but
+it is not historical practice; so for compatibility, you must explicitly
+request it.
+
+@node Interrupts, Recursion, Errors, Recipes
+@section Interrupting or Killing @code{make}
+@cindex interrupt
+@cindex signal
+@cindex deletion of target files
+@cindex removal of target files
+@cindex target, deleting on interrupt
+@cindex killing (interruption)
+
+If @code{make} gets a fatal signal while a shell is executing, it may
+delete the target file that the recipe was supposed to update.  This is
+done if the target file's last-modification time has changed since
+@code{make} first checked it.
+
+The purpose of deleting the target is to make sure that it is remade from
+scratch when @code{make} is next run.  Why is this?  Suppose you type
+@kbd{Ctrl-c} while a compiler is running, and it has begun to write an
+object file @file{foo.o}.  The @kbd{Ctrl-c} kills the compiler, resulting
+in an incomplete file whose last-modification time is newer than the source
+file @file{foo.c}.  But @code{make} also receives the @kbd{Ctrl-c} signal
+and deletes this incomplete file.  If @code{make} did not do this, the next
+invocation of @code{make} would think that @file{foo.o} did not require
+updating---resulting in a strange error message from the linker when it
+tries to link an object file half of which is missing.
+
+@findex .PRECIOUS
+You can prevent the deletion of a target file in this way by making the
+special target @code{.PRECIOUS} depend on it.  Before remaking a target,
+@code{make} checks to see whether it appears on the prerequisites of
+@code{.PRECIOUS}, and thereby decides whether the target should be deleted
+if a signal happens.  Some reasons why you might do this are that the
+target is updated in some atomic fashion, or exists only to record a
+modification-time (its contents do not matter), or must exist at all
+times to prevent other sorts of trouble.
+
+@node Recursion, Canned Recipes, Interrupts, Recipes
+@section Recursive Use of @code{make}
+@cindex recursion
+@cindex subdirectories, recursion for
+
+Recursive use of @code{make} means using @code{make} as a command in a
+makefile.  This technique is useful when you want separate makefiles for
+various subsystems that compose a larger system.  For example, suppose you
+have a sub-directory @file{subdir} which has its own makefile, and you would
+like the containing directory's makefile to run @code{make} on the
+sub-directory.  You can do it by writing this:
+
+@example
+subsystem:
+        cd subdir && $(MAKE)
+@end example
+
+@noindent
+or, equivalently, this (@pxref{Options Summary, ,Summary of Options}):
+
+@example
+subsystem:
+        $(MAKE) -C subdir
+@end example
+@cindex @code{-C}
+@cindex @code{--directory}
+
+You can write recursive @code{make} commands just by copying this example,
+but there are many things to know about how they work and why, and about
+how the sub-@code{make} relates to the top-level @code{make}.  You may
+also find it useful to declare targets that invoke recursive
+@code{make} commands as @samp{.PHONY} (for more discussion on when
+this is useful, see @ref{Phony Targets}).
+
+@vindex @code{CURDIR}
+For your convenience, when GNU @code{make} starts (after it has
+processed any @code{-C} options) it sets the variable @code{CURDIR} to
+the pathname of the current working directory.  This value is never
+touched by @code{make} again: in particular note that if you include
+files from other directories the value of @code{CURDIR} does not
+change.  The value has the same precedence it would have if it were
+set in the makefile (by default, an environment variable @code{CURDIR}
+will not override this value).  Note that setting this variable has no
+impact on the operation of @code{make} (it does not cause @code{make}
+to change its working directory, for example).
+
+@menu
+* MAKE Variable::               The special effects of using @samp{$(MAKE)}.
+* Variables/Recursion::         How to communicate variables to a sub-@code{make}.
+* Options/Recursion::           How to communicate options to a sub-@code{make}.
+* -w Option::                   How the @samp{-w} or @samp{--print-directory} option
+                                  helps debug use of recursive @code{make} commands.
+@end menu
+
+@node MAKE Variable, Variables/Recursion, Recursion, Recursion
+@subsection How the @code{MAKE} Variable Works
+@vindex MAKE
+@cindex recursion, and @code{MAKE} variable
+
+Recursive @code{make} commands should always use the variable @code{MAKE},
+not the explicit command name @samp{make}, as shown here:
+
+@example
+@group
+subsystem:
+        cd subdir && $(MAKE)
+@end group
+@end example
+
+The value of this variable is the file name with which @code{make} was
+invoked.  If this file name was @file{/bin/make}, then the recipe executed
+is @samp{cd subdir && /bin/make}.  If you use a special version of
+@code{make} to run the top-level makefile, the same special version will be
+executed for recursive invocations.
+@cindex @code{cd} (shell command)
+
+@cindex +, and recipes
+As a special feature, using the variable @code{MAKE} in the recipe of
+a rule alters the effects of the @samp{-t} (@samp{--touch}), @samp{-n}
+(@samp{--just-print}), or @samp{-q} (@w{@samp{--question}}) option.
+Using the @code{MAKE} variable has the same effect as using a @samp{+}
+character at the beginning of the recipe line.  @xref{Instead of
+Execution, ,Instead of Executing the Recipes}.  This special feature
+is only enabled if the @code{MAKE} variable appears directly in the
+recipe: it does not apply if the @code{MAKE} variable is referenced
+through expansion of another variable.  In the latter case you must
+use the @samp{+} token to get these special effects.@refill
+
+Consider the command @samp{make -t} in the above example.  (The
+@samp{-t} option marks targets as up to date without actually running
+any recipes; see @ref{Instead of Execution}.)  Following the usual
+definition of @samp{-t}, a @samp{make -t} command in the example would
+create a file named @file{subsystem} and do nothing else.  What you
+really want it to do is run @samp{@w{cd subdir &&} @w{make -t}}; but
+that would require executing the recipe, and @samp{-t} says not to
+execute recipes.@refill
+@cindex @code{-t}, and recursion
+@cindex recursion, and @code{-t}
+@cindex @code{--touch}, and recursion
+
+The special feature makes this do what you want: whenever a recipe
+line of a rule contains the variable @code{MAKE}, the flags @samp{-t},
+@samp{-n} and @samp{-q} do not apply to that line.  Recipe lines
+containing @code{MAKE} are executed normally despite the presence of a
+flag that causes most recipes not to be run.  The usual
+@code{MAKEFLAGS} mechanism passes the flags to the sub-@code{make}
+(@pxref{Options/Recursion, ,Communicating Options to a
+Sub-@code{make}}), so your request to touch the files, or print the
+recipes, is propagated to the subsystem.@refill
+
+@node Variables/Recursion, Options/Recursion, MAKE Variable, Recursion
+@subsection Communicating Variables to a Sub-@code{make}
+@cindex sub-@code{make}
+@cindex environment, and recursion
+@cindex exporting variables
+@cindex variables, environment
+@cindex variables, exporting
+@cindex recursion, and environment
+@cindex recursion, and variables
+
+Variable values of the top-level @code{make} can be passed to the
+sub-@code{make} through the environment by explicit request.  These
+variables are defined in the sub-@code{make} as defaults, but they do
+not override variables defined in the makefile used by
+the sub-@code{make} unless you use the @samp{-e} switch (@pxref{Options
+Summary, ,Summary of Options}).@refill
+
+To pass down, or @dfn{export}, a variable, @code{make} adds the
+variable and its value to the environment for running each line of the
+recipe.  The sub-@code{make}, in turn, uses the environment to
+initialize its table of variable values.  @xref{Environment,
+,Variables from the Environment}.
+
+Except by explicit request, @code{make} exports a variable only if it
+is either defined in the environment initially or set on the command
+line, and if its name consists only of letters, numbers, and underscores.
+Some shells cannot cope with environment variable names consisting of
+characters other than letters, numbers, and underscores.
+
+@cindex SHELL, exported value
+The value of the @code{make} variable @code{SHELL} is not exported.
+Instead, the value of the @code{SHELL} variable from the invoking
+environment is passed to the sub-@code{make}.  You can force
+@code{make} to export its value for @code{SHELL} by using the
+@code{export} directive, described below.  @xref{Choosing the Shell}.
+
+The special variable @code{MAKEFLAGS} is always exported (unless you
+unexport it).  @code{MAKEFILES} is exported if you set it to anything.
+
+@code{make} automatically passes down variable values that were defined
+on the command line, by putting them in the @code{MAKEFLAGS} variable.
+@iftex
+See the next section.
+@end iftex
+@ifnottex
+@xref{Options/Recursion}.
+@end ifnottex
+
+Variables are @emph{not} normally passed down if they were created by
+default by @code{make} (@pxref{Implicit Variables, ,Variables Used by
+Implicit Rules}).  The sub-@code{make} will define these for
+itself.@refill
+
+@findex export
+If you want to export specific variables to a sub-@code{make}, use the
+@code{export} directive, like this:
+
+@example
+export @var{variable} @dots{}
+@end example
+
+@noindent
+@findex unexport
+If you want to @emph{prevent} a variable from being exported, use the
+@code{unexport} directive, like this:
+
+@example
+unexport @var{variable} @dots{}
+@end example
+
+@noindent
+In both of these forms, the arguments to @code{export} and
+@code{unexport} are expanded, and so could be variables or functions
+which expand to a (list of) variable names to be (un)exported.
+
+As a convenience, you can define a variable and export it at the same
+time by doing:
+
+@example
+export @var{variable} = value
+@end example
+
+@noindent
+has the same result as:
+
+@example
+@var{variable} = value
+export @var{variable}
+@end example
+
+@noindent
+and
+
+@example
+export @var{variable} := value
+@end example
+
+@noindent
+has the same result as:
+
+@example
+@var{variable} := value
+export @var{variable}
+@end example
+
+Likewise,
+
+@example
+export @var{variable} += value
+@end example
+
+@noindent
+is just like:
+
+@example
+@var{variable} += value
+export @var{variable}
+@end example
+
+@noindent
+@xref{Appending, ,Appending More Text to Variables}.
+
+You may notice that the @code{export} and @code{unexport} directives
+work in @code{make} in the same way they work in the shell, @code{sh}.
+
+If you want all variables to be exported by default, you can use
+@code{export} by itself:
+
+@example
+export
+@end example
+
+@noindent
+This tells @code{make} that variables which are not explicitly mentioned
+in an @code{export} or @code{unexport} directive should be exported.
+Any variable given in an @code{unexport} directive will still @emph{not}
+be exported.  If you use @code{export} by itself to export variables by
+default, variables whose names contain characters other than
+alphanumerics and underscores will not be exported unless specifically
+mentioned in an @code{export} directive.@refill
+
+@findex .EXPORT_ALL_VARIABLES
+The behavior elicited by an @code{export} directive by itself was the
+default in older versions of GNU @code{make}.  If your makefiles depend
+on this behavior and you want to be compatible with old versions of
+@code{make}, you can write a rule for the special target
+@code{.EXPORT_ALL_VARIABLES} instead of using the @code{export} directive.
+This will be ignored by old @code{make}s, while the @code{export}
+directive will cause a syntax error.@refill
+@cindex compatibility in exporting
+
+Likewise, you can use @code{unexport} by itself to tell @code{make}
+@emph{not} to export variables by default.  Since this is the default
+behavior, you would only need to do this if @code{export} had been used
+by itself earlier (in an included makefile, perhaps).  You
+@strong{cannot} use @code{export} and @code{unexport} by themselves to
+have variables exported for some recipes and not for others.  The last
+@code{export} or @code{unexport} directive that appears by itself
+determines the behavior for the entire run of @code{make}.@refill
+
+@vindex MAKELEVEL
+@cindex recursion, level of
+As a special feature, the variable @code{MAKELEVEL} is changed when it
+is passed down from level to level.  This variable's value is a string
+which is the depth of the level as a decimal number.  The value is
+@samp{0} for the top-level @code{make}; @samp{1} for a sub-@code{make},
+@samp{2} for a sub-sub-@code{make}, and so on.  The incrementation
+happens when @code{make} sets up the environment for a recipe.@refill
+
+The main use of @code{MAKELEVEL} is to test it in a conditional
+directive (@pxref{Conditionals, ,Conditional Parts of Makefiles}); this
+way you can write a makefile that behaves one way if run recursively and
+another way if run directly by you.@refill
+
+@vindex MAKEFILES
+You can use the variable @code{MAKEFILES} to cause all sub-@code{make}
+commands to use additional makefiles.  The value of @code{MAKEFILES} is
+a whitespace-separated list of file names.  This variable, if defined in
+the outer-level makefile, is passed down through the environment; then
+it serves as a list of extra makefiles for the sub-@code{make} to read
+before the usual or specified ones.  @xref{MAKEFILES Variable, ,The
+Variable @code{MAKEFILES}}.@refill
+
+@node Options/Recursion, -w Option, Variables/Recursion, Recursion
+@subsection Communicating Options to a Sub-@code{make}
+@cindex options, and recursion
+@cindex recursion, and options
+
+@vindex MAKEFLAGS
+Flags such as @samp{-s} and @samp{-k} are passed automatically to the
+sub-@code{make} through the variable @code{MAKEFLAGS}.  This variable is
+set up automatically by @code{make} to contain the flag letters that
+@code{make} received.  Thus, if you do @w{@samp{make -ks}} then
+@code{MAKEFLAGS} gets the value @samp{ks}.@refill
+
+As a consequence, every sub-@code{make} gets a value for @code{MAKEFLAGS}
+in its environment.  In response, it takes the flags from that value and
+processes them as if they had been given as arguments.
+@xref{Options Summary, ,Summary of Options}.
+
+@cindex command line variable definitions, and recursion
+@cindex variables, command line, and recursion
+@cindex recursion, and command line variable definitions
+Likewise variables defined on the command line are passed to the
+sub-@code{make} through @code{MAKEFLAGS}.  Words in the value of
+@code{MAKEFLAGS} that contain @samp{=}, @code{make} treats as variable
+definitions just as if they appeared on the command line.
+@xref{Overriding, ,Overriding Variables}.
+
+@cindex @code{-C}, and recursion
+@cindex @code{-f}, and recursion
+@cindex @code{-o}, and recursion
+@cindex @code{-W}, and recursion
+@cindex @code{--directory}, and recursion
+@cindex @code{--file}, and recursion
+@cindex @code{--old-file}, and recursion
+@cindex @code{--assume-old}, and recursion
+@cindex @code{--assume-new}, and recursion
+@cindex @code{--new-file}, and recursion
+@cindex recursion, and @code{-C}
+@cindex recursion, and @code{-f}
+@cindex recursion, and @code{-o}
+@cindex recursion, and @code{-W}
+The options @samp{-C}, @samp{-f}, @samp{-o}, and @samp{-W} are not put
+into @code{MAKEFLAGS}; these options are not passed down.@refill
+
+@cindex @code{-j}, and recursion
+@cindex @code{--jobs}, and recursion
+@cindex recursion, and @code{-j}
+@cindex job slots, and recursion
+The @samp{-j} option is a special case (@pxref{Parallel, ,Parallel Execution}).
+If you set it to some numeric value @samp{N} and your operating system
+supports it (most any UNIX system will; others typically won't), the
+parent @code{make} and all the sub-@code{make}s will communicate to
+ensure that there are only @samp{N} jobs running at the same time
+between them all.  Note that any job that is marked recursive
+(@pxref{Instead of Execution, ,Instead of Executing Recipes})
+doesn't count against the total jobs (otherwise we could get @samp{N}
+sub-@code{make}s running and have no slots left over for any real work!)
+
+If your operating system doesn't support the above communication, then
+@samp{-j 1} is always put into @code{MAKEFLAGS} instead of the value you
+specified.  This is because if the @w{@samp{-j}} option were passed down
+to sub-@code{make}s, you would get many more jobs running in parallel
+than you asked for.  If you give @samp{-j} with no numeric argument,
+meaning to run as many jobs as possible in parallel, this is passed
+down, since multiple infinities are no more than one.@refill
+
+If you do not want to pass the other flags down, you must change the
+value of @code{MAKEFLAGS}, like this:
+
+@example
+subsystem:
+        cd subdir && $(MAKE) MAKEFLAGS=
+@end example
+
+@vindex MAKEOVERRIDES
+The command line variable definitions really appear in the variable
+@code{MAKEOVERRIDES}, and @code{MAKEFLAGS} contains a reference to this
+variable.  If you do want to pass flags down normally, but don't want to
+pass down the command line variable definitions, you can reset
+@code{MAKEOVERRIDES} to empty, like this:
+
+@example
+MAKEOVERRIDES =
+@end example
+
+@noindent
+@cindex Arg list too long
+@cindex E2BIG
+This is not usually useful to do.  However, some systems have a small
+fixed limit on the size of the environment, and putting so much
+information into the value of @code{MAKEFLAGS} can exceed it.  If you
+see the error message @samp{Arg list too long}, this may be the problem.
+@findex .POSIX
+@cindex POSIX
+(For strict compliance with POSIX.2, changing @code{MAKEOVERRIDES} does
+not affect @code{MAKEFLAGS} if the special target @samp{.POSIX} appears
+in the makefile.  You probably do not care about this.)
+
+@vindex MFLAGS
+A similar variable @code{MFLAGS} exists also, for historical
+compatibility.  It has the same value as @code{MAKEFLAGS} except that it
+does not contain the command line variable definitions, and it always
+begins with a hyphen unless it is empty (@code{MAKEFLAGS} begins with a
+hyphen only when it begins with an option that has no single-letter
+version, such as @samp{--warn-undefined-variables}).  @code{MFLAGS} was
+traditionally used explicitly in the recursive @code{make} command, like
+this:
+
+@example
+subsystem:
+        cd subdir && $(MAKE) $(MFLAGS)
+@end example
+
+@noindent
+but now @code{MAKEFLAGS} makes this usage redundant.  If you want your
+makefiles to be compatible with old @code{make} programs, use this
+technique; it will work fine with more modern @code{make} versions too.
+
+@cindex setting options from environment
+@cindex options, setting from environment
+@cindex setting options in makefiles
+@cindex options, setting in makefiles
+The @code{MAKEFLAGS} variable can also be useful if you want to have
+certain options, such as @samp{-k} (@pxref{Options Summary, ,Summary of
+Options}), set each time you run @code{make}.  You simply put a value for
+@code{MAKEFLAGS} in your environment.  You can also set @code{MAKEFLAGS} in
+a makefile, to specify additional flags that should also be in effect for
+that makefile.  (Note that you cannot use @code{MFLAGS} this way.  That
+variable is set only for compatibility; @code{make} does not interpret a
+value you set for it in any way.)
+
+When @code{make} interprets the value of @code{MAKEFLAGS} (either from the
+environment or from a makefile), it first prepends a hyphen if the value
+does not already begin with one.  Then it chops the value into words
+separated by blanks, and parses these words as if they were options given
+on the command line (except that @samp{-C}, @samp{-f}, @samp{-h},
+@samp{-o}, @samp{-W}, and their long-named versions are ignored; and there
+is no error for an invalid option).
+
+If you do put @code{MAKEFLAGS} in your environment, you should be sure not
+to include any options that will drastically affect the actions of
+@code{make} and undermine the purpose of makefiles and of @code{make}
+itself.  For instance, the @samp{-t}, @samp{-n}, and @samp{-q} options, if
+put in one of these variables, could have disastrous consequences and would
+certainly have at least surprising and probably annoying effects.@refill
+
+If you'd like to run other implementations of @code{make} in addition
+to GNU @code{make}, and hence do not want to add GNU
+@code{make}-specific flags to the @code{MAKEFLAGS} variable, you can
+add them to the @code{GNUMAKEFLAGS} variable instead.  This variable
+is parsed just before @code{MAKEFLAGS}, in the same way as
+@code{MAKEFLAGS}.  When @code{make} constructs @code{MAKEFLAGS} to
+pass to a recursive @code{make} it will include all flags, even those
+taken from @code{GNUMAKEFLAGS}.  As a result, after parsing
+@code{GNUMAKEFLAGS} GNU @code{make} sets this variable to the empty
+string to avoid duplicating flags during recursion.
+
+It's best to use @code{GNUMAKEFLAGS} only with flags which won't
+materially change the behavior of your makefiles.  If your makefiles
+require GNU make anyway then simply use @code{MAKEFLAGS}.  Flags such
+as @samp{--no-print-directory} or @samp{--output-sync} may be
+appropriate for @code{GNUMAKEFLAGS}.
+
+@node -w Option,  , Options/Recursion, Recursion
+@subsection The @samp{--print-directory} Option
+@cindex directories, printing them
+@cindex printing directories
+@cindex recursion, and printing directories
+
+If you use several levels of recursive @code{make} invocations, the
+@samp{-w} or @w{@samp{--print-directory}} option can make the output a
+lot easier to understand by showing each directory as @code{make}
+starts processing it and as @code{make} finishes processing it.  For
+example, if @samp{make -w} is run in the directory @file{/u/gnu/make},
+@code{make} will print a line of the form:@refill
+
+@example
+make: Entering directory `/u/gnu/make'.
+@end example
+
+@noindent
+before doing anything else, and a line of the form:
+
+@example
+make: Leaving directory `/u/gnu/make'.
+@end example
+
+@noindent
+when processing is completed.
+
+@cindex @code{-C}, and @code{-w}
+@cindex @code{--directory}, and @code{--print-directory}
+@cindex recursion, and @code{-w}
+@cindex @code{-w}, and @code{-C}
+@cindex @code{-w}, and recursion
+@cindex @code{--print-directory}, and @code{--directory}
+@cindex @code{--print-directory}, and recursion
+@cindex @code{--no-print-directory}
+@cindex @code{--print-directory}, disabling
+@cindex @code{-w}, disabling
+Normally, you do not need to specify this option because @samp{make}
+does it for you: @samp{-w} is turned on automatically when you use the
+@samp{-C} option, and in sub-@code{make}s.  @code{make} will not
+automatically turn on @samp{-w} if you also use @samp{-s}, which says to
+be silent, or if you use @samp{--no-print-directory} to explicitly
+disable it.
+
+@node Canned Recipes, Empty Recipes, Recursion, Recipes
+@section Defining Canned Recipes
+@cindex canned recipes
+@cindex recipes, canned
+@cindex sequences of commands
+@cindex commands, sequences of
+
+When the same sequence of commands is useful in making various
+targets, you can define it as a canned sequence with the @code{define}
+directive, and refer to the canned sequence from the recipes for those
+targets.  The canned sequence is actually a variable, so the name must
+not conflict with other variable names.
+
+Here is an example of defining a canned recipe:
+
+@example
+define run-yacc =
+yacc $(firstword $^)
+mv y.tab.c $@@
+endef
+@end example
+@cindex @code{yacc}
+
+@noindent
+Here @code{run-yacc} is the name of the variable being defined;
+@code{endef} marks the end of the definition; the lines in between are the
+commands.  The @code{define} directive does not expand variable references
+and function calls in the canned sequence; the @samp{$} characters,
+parentheses, variable names, and so on, all become part of the value of the
+variable you are defining.
+@xref{Multi-Line, ,Defining Multi-Line Variables},
+for a complete explanation of @code{define}.
+
+The first command in this example runs Yacc on the first prerequisite of
+whichever rule uses the canned sequence.  The output file from Yacc is
+always named @file{y.tab.c}.  The second command moves the output to the
+rule's target file name.
+
+To use the canned sequence, substitute the variable into the recipe of a
+rule.  You can substitute it like any other variable
+(@pxref{Reference, ,Basics of Variable References}).
+Because variables defined by @code{define} are recursively expanded
+variables, all the variable references you wrote inside the @code{define}
+are expanded now.  For example:
+
+@example
+foo.c : foo.y
+        $(run-yacc)
+@end example
+
+@noindent
+@samp{foo.y} will be substituted for the variable @samp{$^} when it occurs in
+@code{run-yacc}'s value, and @samp{foo.c} for @samp{$@@}.@refill
+
+This is a realistic example, but this particular one is not needed in
+practice because @code{make} has an implicit rule to figure out these
+commands based on the file names involved
+(@pxref{Implicit Rules, ,Using Implicit Rules}).
+
+@cindex @@, and @code{define}
+@cindex -, and @code{define}
+@cindex +, and @code{define}
+In recipe execution, each line of a canned sequence is treated just as
+if the line appeared on its own in the rule, preceded by a tab.  In
+particular, @code{make} invokes a separate sub-shell for each line.  You
+can use the special prefix characters that affect command lines
+(@samp{@@}, @samp{-}, and @samp{+}) on each line of a canned sequence.
+@xref{Recipes, ,Writing Recipes in Rules}.
+For example, using this canned sequence:
+
+@example
+define frobnicate =
+@@echo "frobnicating target $@@"
+frob-step-1 $< -o $@@-step-1
+frob-step-2 $@@-step-1 -o $@@
+endef
+@end example
+
+@noindent
+@code{make} will not echo the first line, the @code{echo} command.
+But it @emph{will} echo the following two recipe lines.
+
+On the other hand, prefix characters on the recipe line that refers to
+a canned sequence apply to every line in the sequence.  So the rule:
+
+@example
+frob.out: frob.in
+        @@$(frobnicate)
+@end example
+
+@noindent
+does not echo @emph{any} recipe lines.
+(@xref{Echoing, ,Recipe Echoing}, for a full explanation of @samp{@@}.)
+
+@node Empty Recipes,  , Canned Recipes, Recipes
+@section Using Empty Recipes
+@cindex empty recipes
+@cindex recipes, empty
+
+It is sometimes useful to define recipes which do nothing.  This is done
+simply by giving a recipe that consists of nothing but whitespace.  For
+example:
+
+@example
+target: ;
+@end example
+
+@noindent
+defines an empty recipe for @file{target}.  You could also use a line
+beginning with a recipe prefix character to define an empty recipe,
+but this would be confusing because such a line looks empty.
+
+@findex .DEFAULT@r{, and empty recipes}
+You may be wondering why you would want to define a recipe that
+does nothing.  The only reason this is useful is to prevent a target
+from getting implicit recipes (from implicit rules or the
+@code{.DEFAULT} special target; @pxref{Implicit Rules} and
+@pxref{Last Resort, ,Defining Last-Resort Default Rules}).@refill
+
+@c !!! another reason is for canonical stamp files:
+@ignore
+@example
+foo: stamp-foo ;
+stamp-foo: foo.in
+        create foo frm foo.in
+        touch $@
+@end example
+@end ignore
+
+You may be inclined to define empty recipes for targets that are
+not actual files, but only exist so that their prerequisites can be
+remade.  However, this is not the best way to do that, because the
+prerequisites may not be remade properly if the target file actually does exist.
+@xref{Phony Targets, ,Phony Targets}, for a better way to do this.
+
+@node Using Variables, Conditionals, Recipes, Top
+@chapter How to Use Variables
+@cindex variable
+@cindex value
+@cindex recursive variable expansion
+@cindex simple variable expansion
+
+A @dfn{variable} is a name defined in a makefile to represent a string
+of text, called the variable's @dfn{value}.  These values are
+substituted by explicit request into targets, prerequisites, recipes,
+and other parts of the makefile.  (In some other versions of @code{make},
+variables are called @dfn{macros}.)
+@cindex macro
+
+Variables and functions in all parts of a makefile are expanded when
+read, except for in recipes, the right-hand sides of variable
+definitions using @samp{=}, and the bodies of variable definitions
+using the @code{define} directive.@refill
+
+Variables can represent lists of file names, options to pass to compilers,
+programs to run, directories to look in for source files, directories to
+write output in, or anything else you can imagine.
+
+A variable name may be any sequence of characters not containing
+@samp{:}, @samp{#}, @samp{=}, or whitespace.  However, variable names
+containing characters other than letters, numbers, and underscores
+should be considered carefully, as in some shells they cannot be
+passed through the environment to a sub-@code{make}
+(@pxref{Variables/Recursion, ,Communicating Variables to a
+Sub-@code{make}}).  Variable names beginning with @samp{.} and an
+uppercase letter may be given special meaning in future versions of
+@code{make}.
+
+Variable names are case-sensitive.  The names @samp{foo}, @samp{FOO},
+and @samp{Foo} all refer to different variables.
+
+It is traditional to use upper case letters in variable names, but we
+recommend using lower case letters for variable names that serve internal
+purposes in the makefile, and reserving upper case for parameters that
+control implicit rules or for parameters that the user should override with
+command options (@pxref{Overriding, ,Overriding Variables}).
+
+A few variables have names that are a single punctuation character or
+just a few characters.  These are the @dfn{automatic variables}, and
+they have particular specialized uses.  @xref{Automatic Variables}.
+
+@menu
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+@end menu
+
+@node Reference, Flavors, Using Variables, Using Variables
+@section Basics of Variable References
+@cindex variables, how to reference
+@cindex reference to variables
+@cindex @code{$}, in variable reference
+@cindex dollar sign (@code{$}), in variable reference
+
+To substitute a variable's value, write a dollar sign followed by the name
+of the variable in parentheses or braces: either @samp{$(foo)} or
+@samp{$@{foo@}} is a valid reference to the variable @code{foo}.  This
+special significance of @samp{$} is why you must write @samp{$$} to have
+the effect of a single dollar sign in a file name or recipe.
+
+Variable references can be used in any context: targets, prerequisites,
+recipes, most directives, and new variable values.  Here is an
+example of a common case, where a variable holds the names of all the
+object files in a program:
+
+@example
+@group
+objects = program.o foo.o utils.o
+program : $(objects)
+        cc -o program $(objects)
+
+$(objects) : defs.h
+@end group
+@end example
+
+Variable references work by strict textual substitution.  Thus, the rule
+
+@example
+@group
+foo = c
+prog.o : prog.$(foo)
+        $(foo)$(foo) -$(foo) prog.$(foo)
+@end group
+@end example
+
+@noindent
+could be used to compile a C program @file{prog.c}.  Since spaces before
+the variable value are ignored in variable assignments, the value of
+@code{foo} is precisely @samp{c}.  (Don't actually write your makefiles
+this way!)
+
+A dollar sign followed by a character other than a dollar sign,
+open-parenthesis or open-brace treats that single character as the
+variable name.  Thus, you could reference the variable @code{x} with
+@samp{$x}.  However, this practice is strongly discouraged, except in
+the case of the automatic variables (@pxref{Automatic Variables}).
+
+@node Flavors, Advanced, Reference, Using Variables
+@section The Two Flavors of Variables
+@cindex flavors of variables
+@cindex recursive variable expansion
+@cindex variables, flavors
+@cindex recursively expanded variables
+@cindex variables, recursively expanded
+
+There are two ways that a variable in GNU @code{make} can have a value;
+we call them the two @dfn{flavors} of variables.  The two flavors are
+distinguished in how they are defined and in what they do when expanded.
+
+@cindex =
+The first flavor of variable is a @dfn{recursively expanded} variable.
+Variables of this sort are defined by lines using @samp{=}
+(@pxref{Setting, ,Setting Variables}) or by the @code{define} directive
+(@pxref{Multi-Line, ,Defining Multi-Line Variables}).  The value you specify
+is installed verbatim; if it contains references to other variables,
+these references are expanded whenever this variable is substituted (in
+the course of expanding some other string).  When this happens, it is
+called @dfn{recursive expansion}.@refill
+
+For example,
+
+@example
+foo = $(bar)
+bar = $(ugh)
+ugh = Huh?
+
+all:;echo $(foo)
+@end example
+
+@noindent
+will echo @samp{Huh?}: @samp{$(foo)} expands to @samp{$(bar)} which
+expands to @samp{$(ugh)} which finally expands to @samp{Huh?}.@refill
+
+This flavor of variable is the only sort supported by most other
+versions of @code{make}.  It has its advantages and its disadvantages.
+An advantage (most would say) is that:
+
+@example
+CFLAGS = $(include_dirs) -O
+include_dirs = -Ifoo -Ibar
+@end example
+
+@noindent
+will do what was intended: when @samp{CFLAGS} is expanded in a recipe,
+it will expand to @samp{-Ifoo -Ibar -O}.  A major disadvantage is that you
+cannot append something on the end of a variable, as in
+
+@example
+CFLAGS = $(CFLAGS) -O
+@end example
+
+@noindent
+because it will cause an infinite loop in the variable expansion.
+(Actually @code{make} detects the infinite loop and reports an error.)
+@cindex loops in variable expansion
+@cindex variables, loops in expansion
+
+Another disadvantage is that any functions
+(@pxref{Functions, ,Functions for Transforming Text})
+referenced in the definition will be executed every time the variable is
+expanded.  This makes @code{make} run slower; worse, it causes the
+@code{wildcard} and @code{shell} functions to give unpredictable results
+because you cannot easily control when they are called, or even how many
+times.
+
+To avoid all the problems and inconveniences of recursively expanded
+variables, there is another flavor: simply expanded variables.
+
+@cindex simply expanded variables
+@cindex variables, simply expanded
+@cindex :=
+@cindex ::=
+@dfn{Simply expanded variables} are defined by lines using @samp{:=}
+or @samp{::=} (@pxref{Setting, ,Setting Variables}).  Both forms are
+equivalent in GNU @code{make}; however only the @samp{::=} form is
+described by the POSIX standard (support for @samp{::=} was added to
+the POSIX standard in 2012, so older versions of @code{make} won't
+accept this form either).
+
+The value of a simply expanded variable is scanned
+once and for all, expanding any references to other variables and
+functions, when the variable is defined.  The actual value of the simply
+expanded variable is the result of expanding the text that you write.
+It does not contain any references to other variables; it contains their
+values @emph{as of the time this variable was defined}.  Therefore,
+
+@example
+x := foo
+y := $(x) bar
+x := later
+@end example
+
+@noindent
+is equivalent to
+
+@example
+y := foo bar
+x := later
+@end example
+
+When a simply expanded variable is referenced, its value is substituted
+verbatim.
+
+Here is a somewhat more complicated example, illustrating the use of
+@samp{:=} in conjunction with the @code{shell} function.
+(@xref{Shell Function, , The @code{shell} Function}.)  This example
+also shows use of the variable @code{MAKELEVEL}, which is changed
+when it is passed down from level to level.
+(@xref{Variables/Recursion, , Communicating Variables to a
+Sub-@code{make}}, for information about @code{MAKELEVEL}.)
+
+@vindex MAKELEVEL
+@vindex MAKE
+@example
+@group
+ifeq (0,$@{MAKELEVEL@})
+whoami    := $(shell whoami)
+host-type := $(shell arch)
+MAKE := $@{MAKE@} host-type=$@{host-type@} whoami=$@{whoami@}
+endif
+@end group
+@end example
+
+@noindent
+An advantage of this use of @samp{:=} is that a typical
+`descend into a directory' recipe then looks like this:
+
+@example
+@group
+$@{subdirs@}:
+        $@{MAKE@} -C $@@ all
+@end group
+@end example
+
+Simply expanded variables generally make complicated makefile programming
+more predictable because they work like variables in most programming
+languages.  They allow you to redefine a variable using its own value (or
+its value processed in some way by one of the expansion functions) and to
+use the expansion functions much more efficiently
+(@pxref{Functions, ,Functions for Transforming Text}).
+
+@cindex spaces, in variable values
+@cindex whitespace, in variable values
+@cindex variables, spaces in values
+You can also use them to introduce controlled leading whitespace into
+variable values.  Leading whitespace characters are discarded from your
+input before substitution of variable references and function calls;
+this means you can include leading spaces in a variable value by
+protecting them with variable references, like this:
+
+@example
+nullstring :=
+space := $(nullstring) # end of the line
+@end example
+
+@noindent
+Here the value of the variable @code{space} is precisely one space.  The
+comment @w{@samp{# end of the line}} is included here just for clarity.
+Since trailing space characters are @emph{not} stripped from variable
+values, just a space at the end of the line would have the same effect
+(but be rather hard to read).  If you put whitespace at the end of a
+variable value, it is a good idea to put a comment like that at the end
+of the line to make your intent clear.  Conversely, if you do @emph{not}
+want any whitespace characters at the end of your variable value, you
+must remember not to put a random comment on the end of the line after
+some whitespace, such as this:
+
+@example
+dir := /foo/bar    # directory to put the frobs in
+@end example
+
+@noindent
+Here the value of the variable @code{dir} is @w{@samp{/foo/bar    }}
+(with four trailing spaces), which was probably not the intention.
+(Imagine something like @w{@samp{$(dir)/file}} with this definition!)
+
+@cindex conditional variable assignment
+@cindex variables, conditional assignment
+@cindex ?=
+There is another assignment operator for variables, @samp{?=}.  This
+is called a conditional variable assignment operator, because it only
+has an effect if the variable is not yet defined.  This statement:
+
+@example
+FOO ?= bar
+@end example
+
+@noindent
+is exactly equivalent to this
+(@pxref{Origin Function, ,The @code{origin} Function}):
+
+@example
+ifeq ($(origin FOO), undefined)
+  FOO = bar
+endif
+@end example
+
+Note that a variable set to an empty value is still defined, so
+@samp{?=} will not set that variable.
+
+@node Advanced, Values, Flavors, Using Variables
+@section Advanced Features for Reference to Variables
+@cindex reference to variables
+
+This section describes some advanced features you can use to reference
+variables in more flexible ways.
+
+@menu
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+@end menu
+
+@node Substitution Refs, Computed Names, Advanced, Advanced
+@subsection Substitution References
+@cindex modified variable reference
+@cindex substitution variable reference
+@cindex variables, modified reference
+@cindex variables, substitution reference
+
+@cindex variables, substituting suffix in
+@cindex suffix, substituting in variables
+A @dfn{substitution reference} substitutes the value of a variable with
+alterations that you specify.  It has the form
+@samp{$(@var{var}:@var{a}=@var{b})} (or
+@samp{$@{@var{var}:@var{a}=@var{b}@}}) and its meaning is to take the value
+of the variable @var{var}, replace every @var{a} at the end of a word with
+@var{b} in that value, and substitute the resulting string.
+
+When we say ``at the end of a word'', we mean that @var{a} must appear
+either followed by whitespace or at the end of the value in order to be
+replaced; other occurrences of @var{a} in the value are unaltered.  For
+example:@refill
+
+@example
+foo := a.o b.o c.o
+bar := $(foo:.o=.c)
+@end example
+
+@noindent
+sets @samp{bar} to @samp{a.c b.c c.c}.  @xref{Setting, ,Setting Variables}.
+
+A substitution reference is actually an abbreviation for use of the
+@code{patsubst} expansion function (@pxref{Text Functions, ,Functions for String Substitution and Analysis}).  We provide
+substitution references as well as @code{patsubst} for compatibility with
+other implementations of @code{make}.
+
+@findex patsubst
+Another type of substitution reference lets you use the full power of
+the @code{patsubst} function.  It has the same form
+@samp{$(@var{var}:@var{a}=@var{b})} described above, except that now
+@var{a} must contain a single @samp{%} character.  This case is
+equivalent to @samp{$(patsubst @var{a},@var{b},$(@var{var}))}.
+@xref{Text Functions, ,Functions for String Substitution and Analysis},
+for a description of the @code{patsubst} function.@refill
+
+@example
+@group
+@exdent For example:
+
+foo := a.o b.o c.o
+bar := $(foo:%.o=%.c)
+@end group
+@end example
+
+@noindent
+sets @samp{bar} to @samp{a.c b.c c.c}.
+
+@node Computed Names,  , Substitution Refs, Advanced
+@subsection Computed Variable Names
+@cindex nested variable reference
+@cindex computed variable name
+@cindex variables, computed names
+@cindex variables, nested references
+@cindex variables, @samp{$} in name
+@cindex @code{$}, in variable name
+@cindex dollar sign (@code{$}), in variable name
+
+Computed variable names are a complicated concept needed only for
+sophisticated makefile programming.  For most purposes you need not
+consider them, except to know that making a variable with a dollar sign
+in its name might have strange results.  However, if you are the type
+that wants to understand everything, or you are actually interested in
+what they do, read on.
+
+Variables may be referenced inside the name of a variable.  This is
+called a @dfn{computed variable name} or a @dfn{nested variable
+reference}.  For example,
+
+@example
+x = y
+y = z
+a := $($(x))
+@end example
+
+@noindent
+defines @code{a} as @samp{z}: the @samp{$(x)} inside @samp{$($(x))} expands
+to @samp{y}, so @samp{$($(x))} expands to @samp{$(y)} which in turn expands
+to @samp{z}.  Here the name of the variable to reference is not stated
+explicitly; it is computed by expansion of @samp{$(x)}.  The reference
+@samp{$(x)} here is nested within the outer variable reference.
+
+The previous example shows two levels of nesting, but any number of levels
+is possible.  For example, here are three levels:
+
+@example
+x = y
+y = z
+z = u
+a := $($($(x)))
+@end example
+
+@noindent
+Here the innermost @samp{$(x)} expands to @samp{y}, so @samp{$($(x))}
+expands to @samp{$(y)} which in turn expands to @samp{z}; now we have
+@samp{$(z)}, which becomes @samp{u}.
+
+References to recursively-expanded variables within a variable name are
+re-expanded in the usual fashion.  For example:
+
+@example
+x = $(y)
+y = z
+z = Hello
+a := $($(x))
+@end example
+
+@noindent
+defines @code{a} as @samp{Hello}: @samp{$($(x))} becomes @samp{$($(y))}
+which becomes @samp{$(z)} which becomes @samp{Hello}.
+
+Nested variable references can also contain modified references and
+function invocations (@pxref{Functions, ,Functions for Transforming Text}),
+just like any other reference.
+For example, using the @code{subst} function
+(@pxref{Text Functions, ,Functions for String Substitution and Analysis}):
+
+@example
+@group
+x = variable1
+variable2 := Hello
+y = $(subst 1,2,$(x))
+z = y
+a := $($($(z)))
+@end group
+@end example
+
+@noindent
+eventually defines @code{a} as @samp{Hello}.  It is doubtful that anyone
+would ever want to write a nested reference as convoluted as this one, but
+it works: @samp{$($($(z)))} expands to @samp{$($(y))} which becomes
+@samp{$($(subst 1,2,$(x)))}.  This gets the value @samp{variable1} from
+@code{x} and changes it by substitution to @samp{variable2}, so that the
+entire string becomes @samp{$(variable2)}, a simple variable reference
+whose value is @samp{Hello}.@refill
+
+A computed variable name need not consist entirely of a single variable
+reference.  It can contain several variable references, as well as some
+invariant text.  For example,
+
+@example
+@group
+a_dirs := dira dirb
+1_dirs := dir1 dir2
+@end group
+
+@group
+a_files := filea fileb
+1_files := file1 file2
+@end group
+
+@group
+ifeq "$(use_a)" "yes"
+a1 := a
+else
+a1 := 1
+endif
+@end group
+
+@group
+ifeq "$(use_dirs)" "yes"
+df := dirs
+else
+df := files
+endif
+
+dirs := $($(a1)_$(df))
+@end group
+@end example
+
+@noindent
+will give @code{dirs} the same value as @code{a_dirs}, @code{1_dirs},
+@code{a_files} or @code{1_files} depending on the settings of @code{use_a}
+and @code{use_dirs}.@refill
+
+Computed variable names can also be used in substitution references:
+
+@example
+@group
+a_objects := a.o b.o c.o
+1_objects := 1.o 2.o 3.o
+
+sources := $($(a1)_objects:.o=.c)
+@end group
+@end example
+
+@noindent
+defines @code{sources} as either @samp{a.c b.c c.c} or @samp{1.c 2.c 3.c},
+depending on the value of @code{a1}.
+
+The only restriction on this sort of use of nested variable references
+is that they cannot specify part of the name of a function to be called.
+This is because the test for a recognized function name is done before
+the expansion of nested references.  For example,
+
+@example
+@group
+ifdef do_sort
+func := sort
+else
+func := strip
+endif
+@end group
+
+@group
+bar := a d b g q c
+@end group
+
+@group
+foo := $($(func) $(bar))
+@end group
+@end example
+
+@noindent
+attempts to give @samp{foo} the value of the variable @samp{sort a d b g
+q c} or @samp{strip a d b g q c}, rather than giving @samp{a d b g q c}
+as the argument to either the @code{sort} or the @code{strip} function.
+This restriction could be removed in the future if that change is shown
+to be a good idea.
+
+You can also use computed variable names in the left-hand side of a
+variable assignment, or in a @code{define} directive, as in:
+
+@example
+dir = foo
+$(dir)_sources := $(wildcard $(dir)/*.c)
+define $(dir)_print =
+lpr $($(dir)_sources)
+endef
+@end example
+
+@noindent
+This example defines the variables @samp{dir}, @samp{foo_sources}, and
+@samp{foo_print}.
+
+Note that @dfn{nested variable references} are quite different from
+@dfn{recursively expanded variables}
+(@pxref{Flavors, ,The Two Flavors of Variables}), though both are
+used together in complex ways when doing makefile programming.@refill
+
+@node Values, Setting, Advanced, Using Variables
+@section How Variables Get Their Values
+@cindex variables, how they get their values
+@cindex value, how a variable gets it
+
+Variables can get values in several different ways:
+
+@itemize @bullet
+@item
+You can specify an overriding value when you run @code{make}.
+@xref{Overriding, ,Overriding Variables}.
+
+@item
+You can specify a value in the makefile, either
+with an assignment (@pxref{Setting, ,Setting Variables}) or with a
+verbatim definition (@pxref{Multi-Line, ,Defining Multi-Line Variables}).@refill
+
+@item
+Variables in the environment become @code{make} variables.
+@xref{Environment, ,Variables from the Environment}.
+
+@item
+Several @dfn{automatic} variables are given new values for each rule.
+Each of these has a single conventional use.
+@xref{Automatic Variables}.
+
+@item
+Several variables have constant initial values.
+@xref{Implicit Variables, ,Variables Used by Implicit Rules}.
+@end itemize
+
+@node Setting, Appending, Values, Using Variables
+@section Setting Variables
+@cindex setting variables
+@cindex variables, setting
+@cindex =
+@cindex :=
+@cindex ::=
+@cindex ?=
+@cindex !=
+
+To set a variable from the makefile, write a line starting with the
+variable name followed by @samp{=} @samp{:=}, or @samp{::=}.  Whatever
+follows the @samp{=}, @samp{:=}, or @samp{::=} on the line becomes the
+value.  For example,
+
+@example
+objects = main.o foo.o bar.o utils.o
+@end example
+
+@noindent
+defines a variable named @code{objects}.  Whitespace around the variable
+name and immediately after the @samp{=} is ignored.
+
+Variables defined with @samp{=} are @dfn{recursively expanded}
+variables.  Variables defined with @samp{:=} or @samp{::=} are
+@dfn{simply expanded} variables; these definitions can contain
+variable references which will be expanded before the definition is
+made.  @xref{Flavors, ,The Two Flavors of Variables}.
+
+The variable name may contain function and variable references, which
+are expanded when the line is read to find the actual variable name to use.
+
+There is no limit on the length of the value of a variable except the
+amount of memory on the computer.  You can split the value of a
+variable into multiple physical lines for readability
+(@pxref{Splitting Lines, ,Splitting Long Lines}).
+
+Most variable names are considered to have the empty string as a value if
+you have never set them.  Several variables have built-in initial values
+that are not empty, but you can set them in the usual ways
+(@pxref{Implicit Variables, ,Variables Used by Implicit Rules}).
+Several special variables are set
+automatically to a new value for each rule; these are called the
+@dfn{automatic} variables (@pxref{Automatic Variables}).
+
+If you'd like a variable to be set to a value only if it's not already
+set, then you can use the shorthand operator @samp{?=} instead of
+@samp{=}.  These two settings of the variable @samp{FOO} are identical
+(@pxref{Origin Function, ,The @code{origin} Function}):
+
+@example
+FOO ?= bar
+@end example
+
+@noindent
+and
+
+@example
+ifeq ($(origin FOO), undefined)
+FOO = bar
+endif
+@end example
+
+The shell assignment operator @samp{!=} can be used to execute a
+program and set a variable to its output.  This operator first
+evaluates the right-hand side, then passes that result to the shell
+for execution.  If the result of the execution ends in a newline, that
+one newline is removed; all other newlines are replaced by spaces.
+The resulting string is then placed into the named
+recursively-expanded variable.  For example:
+
+@example
+hash != printf '\043'
+file_list != find . -name '*.c'
+@end example
+
+If the result of the execution could produce a @code{$}, and you don't
+intend what follows that to be interpreted as a make variable or
+function reference, then you must replace every @code{$} with
+@code{$$} as part of the execution.  Alternatively, you can set a
+simply expanded variable to the result of running a program using the
+@code{shell} function call.  @xref{Shell Function, , The @code{shell}
+Function}.  For example:
+
+@example
+hash := $(shell printf '\043')
+var := $(shell find . -name "*.c")
+@end example
+
+
+@node Appending, Override Directive, Setting, Using Variables
+@section Appending More Text to Variables
+@cindex +=
+@cindex appending to variables
+@cindex variables, appending to
+
+Often it is useful to add more text to the value of a variable already defined.
+You do this with a line containing @samp{+=}, like this:
+
+@example
+objects += another.o
+@end example
+
+@noindent
+This takes the value of the variable @code{objects}, and adds the text
+@samp{another.o} to it (preceded by a single space).  Thus:
+
+@example
+objects = main.o foo.o bar.o utils.o
+objects += another.o
+@end example
+
+@noindent
+sets @code{objects} to @samp{main.o foo.o bar.o utils.o another.o}.
+
+Using @samp{+=} is similar to:
+
+@example
+objects = main.o foo.o bar.o utils.o
+objects := $(objects) another.o
+@end example
+
+@noindent
+but differs in ways that become important when you use more complex values.
+
+When the variable in question has not been defined before, @samp{+=}
+acts just like normal @samp{=}: it defines a recursively-expanded
+variable.  However, when there @emph{is} a previous definition, exactly
+what @samp{+=} does depends on what flavor of variable you defined
+originally.  @xref{Flavors, ,The Two Flavors of Variables}, for an
+explanation of the two flavors of variables.
+
+When you add to a variable's value with @samp{+=}, @code{make} acts
+essentially as if you had included the extra text in the initial
+definition of the variable.  If you defined it first with @samp{:=} or
+@samp{::=}, making it a simply-expanded variable, @samp{+=} adds to
+that simply-expanded definition, and expands the new text before
+appending it to the old value just as @samp{:=} does (see
+@ref{Setting, ,Setting Variables}, for a full explanation of
+@samp{:=} or @samp{::=}).  In fact,
+
+@example
+variable := value
+variable += more
+@end example
+
+@noindent
+is exactly equivalent to:
+
+@noindent
+@example
+variable := value
+variable := $(variable) more
+@end example
+
+On the other hand, when you use @samp{+=} with a variable that you defined
+first to be recursively-expanded using plain @samp{=}, @code{make} does
+something a bit different.  Recall that when you define a
+recursively-expanded variable, @code{make} does not expand the value you set
+for variable and function references immediately.  Instead it stores the text
+verbatim, and saves these variable and function references to be expanded
+later, when you refer to the new variable (@pxref{Flavors, ,The Two Flavors
+of Variables}).  When you use @samp{+=} on a recursively-expanded variable,
+it is this unexpanded text to which @code{make} appends the new text you
+specify.
+
+@example
+@group
+variable = value
+variable += more
+@end group
+@end example
+
+@noindent
+is roughly equivalent to:
+
+@example
+@group
+temp = value
+variable = $(temp) more
+@end group
+@end example
+
+@noindent
+except that of course it never defines a variable called @code{temp}.
+The importance of this comes when the variable's old value contains
+variable references.  Take this common example:
+
+@example
+CFLAGS = $(includes) -O
+@dots{}
+CFLAGS += -pg # enable profiling
+@end example
+
+@noindent
+The first line defines the @code{CFLAGS} variable with a reference to another
+variable, @code{includes}.  (@code{CFLAGS} is used by the rules for C
+compilation; @pxref{Catalogue of Rules, ,Catalogue of Built-In Rules}.)
+Using @samp{=} for the definition makes @code{CFLAGS} a recursively-expanded
+variable, meaning @w{@samp{$(includes) -O}} is @emph{not} expanded when
+@code{make} processes the definition of @code{CFLAGS}.  Thus, @code{includes}
+need not be defined yet for its value to take effect.  It only has to be
+defined before any reference to @code{CFLAGS}.  If we tried to append to the
+value of @code{CFLAGS} without using @samp{+=}, we might do it like this:
+
+@example
+CFLAGS := $(CFLAGS) -pg # enable profiling
+@end example
+
+@noindent
+This is pretty close, but not quite what we want.  Using @samp{:=}
+redefines @code{CFLAGS} as a simply-expanded variable; this means
+@code{make} expands the text @w{@samp{$(CFLAGS) -pg}} before setting the
+variable.  If @code{includes} is not yet defined, we get @w{@samp{ -O
+-pg}}, and a later definition of @code{includes} will have no effect.
+Conversely, by using @samp{+=} we set @code{CFLAGS} to the
+@emph{unexpanded} value @w{@samp{$(includes) -O -pg}}.  Thus we preserve
+the reference to @code{includes}, so if that variable gets defined at
+any later point, a reference like @samp{$(CFLAGS)} still uses its
+value.
+
+@node Override Directive, Multi-Line, Appending, Using Variables
+@section The @code{override} Directive
+@findex override
+@cindex overriding with @code{override}
+@cindex variables, overriding
+
+If a variable has been set with a command argument
+(@pxref{Overriding, ,Overriding Variables}),
+then ordinary assignments in the makefile are ignored.  If you want to set
+the variable in the makefile even though it was set with a command
+argument, you can use an @code{override} directive, which is a line that
+looks like this:@refill
+
+@example
+override @var{variable} = @var{value}
+@end example
+
+@noindent
+or
+
+@example
+override @var{variable} := @var{value}
+@end example
+
+To append more text to a variable defined on the command line, use:
+
+@example
+override @var{variable} += @var{more text}
+@end example
+
+@noindent
+@xref{Appending, ,Appending More Text to Variables}.
+
+Variable assignments marked with the @code{override} flag have a
+higher priority than all other assignments, except another
+@code{override}.  Subsequent assignments or appends to this variable
+which are not marked @code{override} will be ignored.
+
+The @code{override} directive was not invented for escalation in the war
+between makefiles and command arguments.  It was invented so you can alter
+and add to values that the user specifies with command arguments.
+
+For example, suppose you always want the @samp{-g} switch when you run the
+C compiler, but you would like to allow the user to specify the other
+switches with a command argument just as usual.  You could use this
+@code{override} directive:
+
+@example
+override CFLAGS += -g
+@end example
+
+You can also use @code{override} directives with @code{define} directives.
+This is done as you might expect:
+
+@example
+override define foo =
+bar
+endef
+@end example
+
+@noindent
+@iftex
+See the next section for information about @code{define}.
+@end iftex
+@ifnottex
+@xref{Multi-Line, ,Defining Multi-Line Variables}.
+@end ifnottex
+
+@node Multi-Line, Undefine Directive, Override Directive, Using Variables
+@section Defining Multi-Line Variables
+@findex define
+@findex endef
+@cindex multi-line variable definition
+@cindex variables, multi-line
+@cindex verbatim variable definition
+@cindex defining variables verbatim
+@cindex variables, defining verbatim
+
+Another way to set the value of a variable is to use the @code{define}
+directive.  This directive has an unusual syntax which allows newline
+characters to be included in the value, which is convenient for
+defining both canned sequences of commands (@pxref{Canned Recipes,
+,Defining Canned Recipes}), and also sections of makefile syntax to
+use with @code{eval} (@pxref{Eval Function}).@refill
+
+The @code{define} directive is followed on the same line by the name
+of the variable being defined and an (optional) assignment operator,
+and nothing more.  The value to give the variable appears on the
+following lines.  The end of the value is marked by a line containing
+just the word @code{endef}.  Aside from this difference in syntax,
+@code{define} works just like any other variable definition.  The
+variable name may contain function and variable references, which are
+expanded when the directive is read to find the actual variable name
+to use.
+
+You may omit the variable assignment operator if you prefer.  If
+omitted, @code{make} assumes it to be @samp{=} and creates a
+recursively-expanded variable (@pxref{Flavors, ,The Two Flavors of Variables}).
+When using a @samp{+=} operator, the value is appended to the previous
+value as with any other append operation: with a single space
+separating the old and new values.
+
+You may nest @code{define} directives: @code{make} will keep track of
+nested directives and report an error if they are not all properly
+closed with @code{endef}.  Note that lines beginning with the recipe
+prefix character are considered part of a recipe, so any @code{define}
+or @code{endef} strings appearing on such a line will not be
+considered @code{make} directives.
+
+@example
+define two-lines =
+echo foo
+echo $(bar)
+endef
+@end example
+
+The value in an ordinary assignment cannot contain a newline; but the
+newlines that separate the lines of the value in a @code{define} become
+part of the variable's value (except for the final newline which precedes
+the @code{endef} and is not considered part of the value).@refill
+
+@need 800
+When used in a recipe, the previous example is functionally equivalent
+to this:
+
+@example
+two-lines = echo foo; echo $(bar)
+@end example
+
+@noindent
+since two commands separated by semicolon behave much like two separate
+shell commands.  However, note that using two separate lines means
+@code{make} will invoke the shell twice, running an independent sub-shell
+for each line.  @xref{Execution, ,Recipe Execution}.
+
+If you want variable definitions made with @code{define} to take
+precedence over command-line variable definitions, you can use the
+@code{override} directive together with @code{define}:
+
+@example
+override define two-lines =
+foo
+$(bar)
+endef
+@end example
+
+@noindent
+@xref{Override Directive, ,The @code{override} Directive}.
+
+@node Undefine Directive, Environment, Multi-Line, Using Variables
+@section Undefining Variables
+@findex undefine
+@cindex undefining variable
+
+If you want to clear a variable, setting its value to empty is usually
+sufficient. Expanding such a variable will yield the same result (empty
+string) regardless of whether it was set or not. However, if you are
+using the @code{flavor} (@pxref{Flavor Function}) and
+@code{origin} (@pxref{Origin Function}) functions, there is a difference
+between a variable that was never set and a variable with an empty value.
+In such situations you may want to use the @code{undefine} directive to
+make a variable appear as if it was never set. For example:
+
+@example
+foo := foo
+bar = bar
+
+undefine foo
+undefine bar
+
+$(info $(origin foo))
+$(info $(flavor bar))
+@end example
+
+This example will print ``undefined'' for both variables.
+
+If you want to undefine a command-line variable definition, you can use
+the @code{override} directive together with @code{undefine}, similar to
+how this is done for variable definitions:
+
+@example
+override undefine CFLAGS
+@end example
+
+@node Environment, Target-specific, Undefine Directive, Using Variables
+@section Variables from the Environment
+
+@cindex variables, environment
+@cindex environment
+Variables in @code{make} can come from the environment in which
+@code{make} is run.  Every environment variable that @code{make} sees
+when it starts up is transformed into a @code{make} variable with the
+same name and value.  However, an explicit assignment in the makefile,
+or with a command argument, overrides the environment.  (If the
+@samp{-e} flag is specified, then values from the environment override
+assignments in the makefile.  @xref{Options Summary, ,Summary of
+Options}.  But this is not recommended practice.)
+
+Thus, by setting the variable @code{CFLAGS} in your environment, you can
+cause all C compilations in most makefiles to use the compiler switches you
+prefer.  This is safe for variables with standard or conventional meanings
+because you know that no makefile will use them for other things.  (Note
+this is not totally reliable; some makefiles set @code{CFLAGS} explicitly
+and therefore are not affected by the value in the environment.)
+
+When @code{make} runs a recipe, variables defined in the
+makefile are placed into the environment of each shell.  This allows
+you to pass values to sub-@code{make} invocations (@pxref{Recursion,
+,Recursive Use of @code{make}}).  By default, only variables that came
+from the environment or the command line are passed to recursive
+invocations.  You can use the @code{export} directive to pass other
+variables.  @xref{Variables/Recursion, , Communicating Variables to a
+Sub-@code{make}}, for full details.
+
+Other use of variables from the environment is not recommended.  It is not
+wise for makefiles to depend for their functioning on environment variables
+set up outside their control, since this would cause different users to get
+different results from the same makefile.  This is against the whole
+purpose of most makefiles.
+
+@cindex SHELL, import from environment
+Such problems would be especially likely with the variable
+@code{SHELL}, which is normally present in the environment to specify
+the user's choice of interactive shell.  It would be very undesirable
+for this choice to affect @code{make}; so, @code{make} handles the
+@code{SHELL} environment variable in a special way; see @ref{Choosing
+the Shell}.@refill
+
+@node Target-specific, Pattern-specific, Environment, Using Variables
+@section Target-specific Variable Values
+@cindex target-specific variables
+@cindex variables, target-specific
+
+Variable values in @code{make} are usually global; that is, they are the
+same regardless of where they are evaluated (unless they're reset, of
+course).  One exception to that is automatic variables
+(@pxref{Automatic Variables}).
+
+The other exception is @dfn{target-specific variable values}.  This
+feature allows you to define different values for the same variable,
+based on the target that @code{make} is currently building.  As with
+automatic variables, these values are only available within the context
+of a target's recipe (and in other target-specific assignments).
+
+Set a target-specific variable value like this:
+
+@example
+@var{target} @dots{} : @var{variable-assignment}
+@end example
+
+Target-specific variable assignments can be prefixed with any or all of the
+special keywords @code{export}, @code{override}, or @code{private};
+these apply their normal behavior to this instance of the variable only.
+
+Multiple @var{target} values create a target-specific variable value for
+each member of the target list individually.
+
+The @var{variable-assignment} can be any valid form of assignment;
+recursive (@samp{=}), simple (@samp{:=} or @samp{::=}), appending
+(@samp{+=}), or conditional (@samp{?=}).  All variables that appear
+within the @var{variable-assignment} are evaluated within the context
+of the target: thus, any previously-defined target-specific variable
+values will be in effect.  Note that this variable is actually
+distinct from any ``global'' value: the two variables do not have to
+have the same flavor (recursive vs.@: simple).
+
+Target-specific variables have the same priority as any other makefile
+variable.  Variables provided on the command line (and in the
+environment if the @samp{-e} option is in force) will take precedence.
+Specifying the @code{override} directive will allow the target-specific
+variable value to be preferred.
+
+There is one more special feature of target-specific variables: when
+you define a target-specific variable that variable value is also in
+effect for all prerequisites of this target, and all their
+prerequisites, etc.@: (unless those prerequisites override that variable
+with their own target-specific variable value).  So, for example, a
+statement like this:
+
+@example
+prog : CFLAGS = -g
+prog : prog.o foo.o bar.o
+@end example
+
+@noindent
+will set @code{CFLAGS} to @samp{-g} in the recipe for @file{prog}, but
+it will also set @code{CFLAGS} to @samp{-g} in the recipes that create
+@file{prog.o}, @file{foo.o}, and @file{bar.o}, and any recipes which
+create their prerequisites.
+
+Be aware that a given prerequisite will only be built once per
+invocation of make, at most.  If the same file is a prerequisite of
+multiple targets, and each of those targets has a different value for
+the same target-specific variable, then the first target to be built
+will cause that prerequisite to be built and the prerequisite will
+inherit the target-specific value from the first target.  It will
+ignore the target-specific values from any other targets.
+
+@node Pattern-specific, Suppressing Inheritance, Target-specific, Using Variables
+@section Pattern-specific Variable Values
+@cindex pattern-specific variables
+@cindex variables, pattern-specific
+
+In addition to target-specific variable values
+(@pxref{Target-specific, ,Target-specific Variable Values}), GNU
+@code{make} supports pattern-specific variable values.  In this form,
+the variable is defined for any target that matches the pattern
+specified.
+
+Set a pattern-specific variable value like this:
+
+@example
+@var{pattern} @dots{} : @var{variable-assignment}
+@end example
+where @var{pattern} is a %-pattern.  As with target-specific variable
+values, multiple @var{pattern} values create a pattern-specific variable
+value for each pattern individually.  The @var{variable-assignment} can
+be any valid form of assignment.  Any command line variable setting will
+take precedence, unless @code{override} is specified.
+
+For example:
+
+@example
+%.o : CFLAGS = -O
+@end example
+
+@noindent
+will assign @code{CFLAGS} the value of @samp{-O} for all targets
+matching the pattern @code{%.o}.
+
+If a target matches more than one pattern, the matching pattern-specific
+variables with longer stems are interpreted first. This results in more
+specific variables taking precedence over the more generic ones, for
+example:
+
+@example
+%.o: %.c
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@@
+
+lib/%.o: CFLAGS := -fPIC -g
+%.o: CFLAGS := -g
+
+all: foo.o lib/bar.o
+@end example
+
+In this example the first definition of the @code{CFLAGS} variable
+will be used to update @file{lib/bar.o} even though the second one
+also applies to this target. Pattern-specific variables which result
+in the same stem length are considered in the order in which they
+were defined in the makefile.
+
+Pattern-specific variables are searched after any target-specific
+variables defined explicitly for that target, and before target-specific
+variables defined for the parent target.
+
+@node Suppressing Inheritance, Special Variables, Pattern-specific, Using Variables
+@section Suppressing Inheritance
+@findex private
+@cindex suppressing inheritance
+@cindex inheritance, suppressing
+
+As described in previous sections, @code{make} variables are inherited
+by prerequisites.  This capability allows you to modify the behavior
+of a prerequisite based on which targets caused it to be rebuilt.  For
+example, you might set a target-specific variable on a @code{debug}
+target, then running @samp{make debug} will cause that variable to be
+inherited by all prerequisites of @code{debug}, while just running
+@samp{make all} (for example) would not have that assignment.
+
+Sometimes, however, you may not want a variable to be inherited.  For
+these situations, @code{make} provides the @code{private} modifier.
+Although this modifier can be used with any variable assignment, it
+makes the most sense with target- and pattern-specific variables.  Any
+variable marked @code{private} will be visible to its local target but
+will not be inherited by prerequisites of that target.  A global
+variable marked @code{private} will be visible in the global scope but
+will not be inherited by any target, and hence will not be visible
+in any recipe.
+
+As an example, consider this makefile:
+@example
+EXTRA_CFLAGS =
+
+prog: private EXTRA_CFLAGS = -L/usr/local/lib
+prog: a.o b.o
+@end example
+
+Due to the @code{private} modifier, @code{a.o} and @code{b.o} will not
+inherit the @code{EXTRA_CFLAGS} variable assignment from the
+@code{prog} target.
+
+@node Special Variables,  , Suppressing Inheritance, Using Variables
+@comment  node-name,  next,  previous,  up
+@section Other Special Variables
+@cindex makefiles, and special variables
+@cindex special variables
+
+GNU @code{make} supports some variables that have special properties.
+
+@table @code
+
+@vindex MAKEFILE_LIST @r{(list of parsed makefiles)}
+@cindex makefiles, and @code{MAKEFILE_LIST} variable
+@cindex including (@code{MAKEFILE_LIST} variable)
+@item MAKEFILE_LIST
+Contains the name of each makefile that is parsed by @code{make}, in
+the order in which it was parsed.  The name is appended just
+before @code{make} begins to parse the makefile.  Thus, if the first
+thing a makefile does is examine the last word in this variable, it
+will be the name of the current makefile.  Once the current makefile
+has used @code{include}, however, the last word will be the
+just-included makefile.
+
+If a makefile named @code{Makefile} has this content:
+
+@example
+@group
+name1 := $(lastword $(MAKEFILE_LIST))
+
+include inc.mk
+
+name2 := $(lastword $(MAKEFILE_LIST))
+
+all:
+        @@echo name1 = $(name1)
+        @@echo name2 = $(name2)
+@end group
+@end example
+
+@noindent
+then you would expect to see this output:
+
+@example
+@group
+name1 = Makefile
+name2 = inc.mk
+@end group
+@end example
+
+@vindex .DEFAULT_GOAL @r{(define default goal)}
+@item .DEFAULT_GOAL
+Sets the default goal to be used if no targets were specified on the
+command line (@pxref{Goals, , Arguments to Specify the Goals}).  The
+@code{.DEFAULT_GOAL} variable allows you to discover the current
+default goal, restart the default goal selection algorithm by clearing
+its value, or to explicitly set the default goal.  The following
+example illustrates these cases:
+
+@example
+@group
+# Query the default goal.
+ifeq ($(.DEFAULT_GOAL),)
+  $(warning no default goal is set)
+endif
+
+.PHONY: foo
+foo: ; @@echo $@@
+
+$(warning default goal is $(.DEFAULT_GOAL))
+
+# Reset the default goal.
+.DEFAULT_GOAL :=
+
+.PHONY: bar
+bar: ; @@echo $@@
+
+$(warning default goal is $(.DEFAULT_GOAL))
+
+# Set our own.
+.DEFAULT_GOAL := foo
+@end group
+@end example
+
+This makefile prints:
+
+@example
+@group
+no default goal is set
+default goal is foo
+default goal is bar
+foo
+@end group
+@end example
+
+Note that assigning more than one target name to @code{.DEFAULT_GOAL} is
+invalid and will result in an error.
+
+@vindex MAKE_RESTARTS @r{(number of times @code{make} has restarted)}
+@item MAKE_RESTARTS
+This variable is set only if this instance of @code{make} has
+restarted (@pxref{Remaking Makefiles, , How Makefiles Are Remade}): it
+will contain the number of times this instance has restarted.  Note
+this is not the same as recursion (counted by the @code{MAKELEVEL}
+variable).  You should not set, modify, or export this variable.
+
+@vindex MAKE_TERMOUT @r{(whether stdout is a terminal)}
+@vindex MAKE_TERMERR @r{(whether stderr is a terminal)}
+@item MAKE_TERMOUT
+@itemx MAKE_TERMERR
+When @code{make} starts it will check whether stdout and stderr will
+show their output on a terminal.  If so, it will set
+@code{MAKE_TERMOUT} and @code{MAKE_TERMERR}, respectively, to the name
+of the terminal device (or @code{true} if this cannot be determined).
+If set these variables will be marked for export.  These variables
+will not be changed by @code{make} and they will not be modified if
+already set.
+
+These values can be used (particularly in combination with output
+synchronization (@pxref{Parallel Output, ,Output During Parallel
+Execution}) to determine whether @code{make} itself is writing to a
+terminal; they can be tested to decide whether to force recipe
+commands to generate colorized output for example.
+
+If you invoke a sub-@code{make} and redirect its stdout or stderr it
+is your responsibility to reset or unexport these variables as well,
+if your makefiles rely on them.
+
+@vindex .RECIPEPREFIX @r{(change the recipe prefix character)}
+@item .RECIPEPREFIX
+The first character of the value of this variable is used as the
+character make assumes is introducing a recipe line.  If the variable
+is empty (as it is by default) that character is the standard tab
+character.  For example, this is a valid makefile:
+
+@example
+@group
+.RECIPEPREFIX = >
+all:
+> @@echo Hello, world
+@end group
+@end example
+
+The value of @code{.RECIPEPREFIX} can be changed multiple times; once set
+it stays in effect for all rules parsed until it is modified.
+
+@vindex .VARIABLES @r{(list of variables)}
+@item .VARIABLES
+Expands to a list of the @emph{names} of all global variables defined
+so far.  This includes variables which have empty values, as well as
+built-in variables (@pxref{Implicit Variables, , Variables Used by
+Implicit Rules}), but does not include any variables which are only
+defined in a target-specific context.  Note that any value you assign
+to this variable will be ignored; it will always return its special
+value.
+
+@c @vindex .TARGETS @r{(list of targets)}
+@c @item .TARGETS
+@c The second special variable is @code{.TARGETS}.  When expanded, the
+@c value consists of a list of all targets defined in all makefiles read
+@c up until that point.  Note it's not enough for a file to be simply
+@c mentioned in the makefile to be listed in this variable, even if it
+@c would match an implicit rule and become an ``implicit target''.  The
+@c file must appear as a target, on the left-hand side of a ``:'', to be
+@c considered a target for the purposes of this variable.
+
+@vindex .FEATURES @r{(list of supported features)}
+@item .FEATURES
+Expands to a list of special features supported by this version of
+@code{make}.  Possible values include, but are not limited to:
+
+@table @samp
+
+@item archives
+Supports @code{ar} (archive) files using special file name syntax.
+@xref{Archives, ,Using @code{make} to Update Archive Files}.
+
+@item check-symlink
+Supports the @code{-L} (@code{--check-symlink-times}) flag.
+@xref{Options Summary, ,Summary of Options}.
+
+@item else-if
+Supports ``else if'' non-nested conditionals.  @xref{Conditional
+Syntax, ,Syntax of Conditionals}.
+
+@item jobserver
+Supports ``job server'' enhanced parallel builds.  @xref{Parallel,
+,Parallel Execution}.
+
+@item oneshell
+Supports the @code{.ONESHELL} special target.  @xref{One Shell, ,Using
+One Shell}.
+
+@item order-only
+Supports order-only prerequisites.  @xref{Prerequisite Types, ,Types
+of Prerequisites}.
+
+@item second-expansion
+Supports secondary expansion of prerequisite lists.
+
+@item shortest-stem
+Uses the ``shortest stem'' method of choosing which pattern, of
+multiple applicable options, will be used.  @xref{Pattern Match, ,How
+Patterns Match}.
+
+@item target-specific
+Supports target-specific and pattern-specific variable assignments.
+@xref{Target-specific, ,Target-specific Variable Values}.
+
+@item undefine
+Supports the @code{undefine} directive.  @xref{Undefine Directive}.
+
+@item guile
+Has GNU Guile available as an embedded extension language.
+@xref{Guile Integration, ,GNU Guile Integration}.
+
+@item load
+Supports dynamically loadable objects for creating custom extensions.
+@xref{Loading Objects, ,Loading Dynamic Objects}.
+@end table
+
+@vindex .INCLUDE_DIRS @r{(list of include directories)}
+@item .INCLUDE_DIRS
+Expands to a list of directories that @code{make} searches for
+included makefiles (@pxref{Include, , Including Other Makefiles}).
+
+@end table
+
+@node Conditionals, Functions, Using Variables, Top
+@chapter Conditional Parts of Makefiles
+
+@cindex conditionals
+A @dfn{conditional} directive causes part of a makefile to be obeyed
+or ignored depending on the values of variables.  Conditionals can
+compare the value of one variable to another, or the value of a
+variable to a constant string.  Conditionals control what @code{make}
+actually ``sees'' in the makefile, so they @emph{cannot} be used to
+control recipes at the time of execution.@refill
+
+@menu
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+@end menu
+
+@node Conditional Example, Conditional Syntax, Conditionals, Conditionals
+@section Example of a Conditional
+
+The following example of a conditional tells @code{make} to use one
+set of libraries if the @code{CC} variable is @samp{gcc}, and a
+different set of libraries otherwise.  It works by controlling which
+of two recipe lines will be used for the rule.  The result is that
+@samp{CC=gcc} as an argument to @code{make} changes not only which
+compiler is used but also which libraries are linked.
+
+@example
+libs_for_gcc = -lgnu
+normal_libs =
+
+foo: $(objects)
+ifeq ($(CC),gcc)
+        $(CC) -o foo $(objects) $(libs_for_gcc)
+else
+        $(CC) -o foo $(objects) $(normal_libs)
+endif
+@end example
+
+This conditional uses three directives: one @code{ifeq}, one @code{else}
+and one @code{endif}.
+
+The @code{ifeq} directive begins the conditional, and specifies the
+condition.  It contains two arguments, separated by a comma and surrounded
+by parentheses.  Variable substitution is performed on both arguments and
+then they are compared.  The lines of the makefile following the
+@code{ifeq} are obeyed if the two arguments match; otherwise they are
+ignored.
+
+The @code{else} directive causes the following lines to be obeyed if the
+previous conditional failed.  In the example above, this means that the
+second alternative linking command is used whenever the first alternative
+is not used.  It is optional to have an @code{else} in a conditional.
+
+The @code{endif} directive ends the conditional.  Every conditional must
+end with an @code{endif}.  Unconditional makefile text follows.
+
+As this example illustrates, conditionals work at the textual level:
+the lines of the conditional are treated as part of the makefile, or
+ignored, according to the condition.  This is why the larger syntactic
+units of the makefile, such as rules, may cross the beginning or the
+end of the conditional.
+
+When the variable @code{CC} has the value @samp{gcc}, the above example has
+this effect:
+
+@example
+foo: $(objects)
+        $(CC) -o foo $(objects) $(libs_for_gcc)
+@end example
+
+@noindent
+When the variable @code{CC} has any other value, the effect is this:
+
+@example
+foo: $(objects)
+        $(CC) -o foo $(objects) $(normal_libs)
+@end example
+
+Equivalent results can be obtained in another way by conditionalizing a
+variable assignment and then using the variable unconditionally:
+
+@example
+libs_for_gcc = -lgnu
+normal_libs =
+
+ifeq ($(CC),gcc)
+  libs=$(libs_for_gcc)
+else
+  libs=$(normal_libs)
+endif
+
+foo: $(objects)
+        $(CC) -o foo $(objects) $(libs)
+@end example
+
+@node Conditional Syntax, Testing Flags, Conditional Example, Conditionals
+@section Syntax of Conditionals
+@findex ifdef
+@findex ifeq
+@findex ifndef
+@findex ifneq
+@findex else
+@findex endif
+
+The syntax of a simple conditional with no @code{else} is as follows:
+
+@example
+@var{conditional-directive}
+@var{text-if-true}
+endif
+@end example
+
+@noindent
+The @var{text-if-true} may be any lines of text, to be considered as part
+of the makefile if the condition is true.  If the condition is false, no
+text is used instead.
+
+The syntax of a complex conditional is as follows:
+
+@example
+@var{conditional-directive}
+@var{text-if-true}
+else
+@var{text-if-false}
+endif
+@end example
+
+or:
+
+@example
+@var{conditional-directive-one}
+@var{text-if-one-is-true}
+else @var{conditional-directive-two}
+@var{text-if-two-is-true}
+else
+@var{text-if-one-and-two-are-false}
+endif
+@end example
+
+@noindent
+There can be as many ``@code{else} @var{conditional-directive}''
+clauses as necessary.  Once a given condition is true,
+@var{text-if-true} is used and no other clause is used; if no
+condition is true then @var{text-if-false} is used.  The
+@var{text-if-true} and @var{text-if-false} can be any number of lines
+of text.
+
+The syntax of the @var{conditional-directive} is the same whether the
+conditional is simple or complex; after an @code{else} or not.  There
+are four different directives that test different conditions.  Here is
+a table of them:
+
+@table @code
+@item ifeq (@var{arg1}, @var{arg2})
+@itemx ifeq '@var{arg1}' '@var{arg2}'
+@itemx ifeq "@var{arg1}" "@var{arg2}"
+@itemx ifeq "@var{arg1}" '@var{arg2}'
+@itemx ifeq '@var{arg1}' "@var{arg2}"
+Expand all variable references in @var{arg1} and @var{arg2} and
+compare them.  If they are identical, the @var{text-if-true} is
+effective; otherwise, the @var{text-if-false}, if any, is effective.
+
+Often you want to test if a variable has a non-empty value.  When the
+value results from complex expansions of variables and functions,
+expansions you would consider empty may actually contain whitespace
+characters and thus are not seen as empty.  However, you can use the
+@code{strip} function (@pxref{Text Functions}) to avoid interpreting
+whitespace as a non-empty value.  For example:
+
+@example
+@group
+ifeq ($(strip $(foo)),)
+@var{text-if-empty}
+endif
+@end group
+@end example
+
+@noindent
+will evaluate @var{text-if-empty} even if the expansion of
+@code{$(foo)} contains whitespace characters.
+
+@item ifneq (@var{arg1}, @var{arg2})
+@itemx ifneq '@var{arg1}' '@var{arg2}'
+@itemx ifneq "@var{arg1}" "@var{arg2}"
+@itemx ifneq "@var{arg1}" '@var{arg2}'
+@itemx ifneq '@var{arg1}' "@var{arg2}"
+Expand all variable references in @var{arg1} and @var{arg2} and
+compare them.  If they are different, the @var{text-if-true} is
+effective; otherwise, the @var{text-if-false}, if any, is effective.
+
+@item ifdef @var{variable-name}
+The @code{ifdef} form takes the @emph{name} of a variable as its
+argument, not a reference to a variable.  The value of that variable
+has a non-empty value, the @var{text-if-true} is effective; otherwise,
+the @var{text-if-false}, if any, is effective.  Variables that have
+never been defined have an empty value.  The text @var{variable-name}
+is expanded, so it could be a variable or function that expands
+to the name of a variable.  For example:
+
+@example
+bar = true
+foo = bar
+ifdef $(foo)
+frobozz = yes
+endif
+@end example
+
+The variable reference @code{$(foo)} is expanded, yielding @code{bar},
+which is considered to be the name of a variable.  The variable
+@code{bar} is not expanded, but its value is examined to determine if
+it is non-empty.
+
+Note that @code{ifdef} only tests whether a variable has a value.  It
+does not expand the variable to see if that value is nonempty.
+Consequently, tests using @code{ifdef} return true for all definitions
+except those like @code{foo =}.  To test for an empty value, use
+@w{@code{ifeq ($(foo),)}}.  For example,
+
+@example
+bar =
+foo = $(bar)
+ifdef foo
+frobozz = yes
+else
+frobozz = no
+endif
+@end example
+
+@noindent
+sets @samp{frobozz} to @samp{yes}, while:
+
+@example
+foo =
+ifdef foo
+frobozz = yes
+else
+frobozz = no
+endif
+@end example
+
+@noindent
+sets @samp{frobozz} to @samp{no}.
+
+@item ifndef @var{variable-name}
+If the variable @var{variable-name} has an empty value, the
+@var{text-if-true} is effective; otherwise, the @var{text-if-false},
+if any, is effective.  The rules for expansion and testing of
+@var{variable-name} are identical to the @code{ifdef} directive.
+@end table
+
+Extra spaces are allowed and ignored at the beginning of the
+conditional directive line, but a tab is not allowed.  (If the line
+begins with a tab, it will be considered part of a recipe for a rule.)
+Aside from this, extra spaces or tabs may be inserted with no effect
+anywhere except within the directive name or within an argument.  A
+comment starting with @samp{#} may appear at the end of the line.
+
+The other two directives that play a part in a conditional are @code{else}
+and @code{endif}.  Each of these directives is written as one word, with no
+arguments.  Extra spaces are allowed and ignored at the beginning of the
+line, and spaces or tabs at the end.  A comment starting with @samp{#} may
+appear at the end of the line.
+
+Conditionals affect which lines of the makefile @code{make} uses.  If
+the condition is true, @code{make} reads the lines of the
+@var{text-if-true} as part of the makefile; if the condition is false,
+@code{make} ignores those lines completely.  It follows that syntactic
+units of the makefile, such as rules, may safely be split across the
+beginning or the end of the conditional.@refill
+
+@code{make} evaluates conditionals when it reads a makefile.
+Consequently, you cannot use automatic variables in the tests of
+conditionals because they are not defined until recipes are run
+(@pxref{Automatic Variables}).
+
+To prevent intolerable confusion, it is not permitted to start a
+conditional in one makefile and end it in another.  However, you may
+write an @code{include} directive within a conditional, provided you do
+not attempt to terminate the conditional inside the included file.
+
+@node Testing Flags,  , Conditional Syntax, Conditionals
+@section Conditionals that Test Flags
+
+You can write a conditional that tests @code{make} command flags such as
+@samp{-t} by using the variable @code{MAKEFLAGS} together with the
+@code{findstring} function
+(@pxref{Text Functions, , Functions for String Substitution and Analysis}).
+This is useful when @code{touch} is not enough to make a file appear up
+to date.
+
+The @code{findstring} function determines whether one string appears as a
+substring of another.  If you want to test for the @samp{-t} flag,
+use @samp{t} as the first string and the value of @code{MAKEFLAGS} as
+the other.
+
+For example, here is how to arrange to use @samp{ranlib -t} to finish
+marking an archive file up to date:
+
+@example
+archive.a: @dots{}
+ifneq (,$(findstring t,$(MAKEFLAGS)))
+        +touch archive.a
+        +ranlib -t archive.a
+else
+        ranlib archive.a
+endif
+@end example
+
+@noindent
+The @samp{+} prefix marks those recipe lines as ``recursive'' so that
+they will be executed despite use of the @samp{-t} flag.
+@xref{Recursion, ,Recursive Use of @code{make}}.
+
+@node Functions, Running, Conditionals, Top
+@chapter Functions for Transforming Text
+@cindex functions
+
+@dfn{Functions} allow you to do text processing in the makefile to
+compute the files to operate on or the commands to use in recipes.
+You use a function in a @dfn{function call}, where you give the name
+of the function and some text (the @dfn{arguments}) for the function
+to operate on.  The result of the function's processing is substituted
+into the makefile at the point of the call, just as a variable might
+be substituted.
+
+@menu
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+@end menu
+
+@node Syntax of Functions, Text Functions, Functions, Functions
+@section Function Call Syntax
+@cindex @code{$}, in function call
+@cindex dollar sign (@code{$}), in function call
+@cindex arguments of functions
+@cindex functions, syntax of
+
+A function call resembles a variable reference.  It can appear
+anywhere a variable reference can appear, and it is expanded using the
+same rules as variable references.  A function call looks like this:
+
+@example
+$(@var{function} @var{arguments})
+@end example
+
+@noindent
+or like this:
+
+@example
+$@{@var{function} @var{arguments}@}
+@end example
+
+Here @var{function} is a function name; one of a short list of names
+that are part of @code{make}.  You can also essentially create your own
+functions by using the @code{call} built-in function.
+
+The @var{arguments} are the arguments of the function.  They are
+separated from the function name by one or more spaces or tabs, and if
+there is more than one argument, then they are separated by commas.
+Such whitespace and commas are not part of an argument's value.  The
+delimiters which you use to surround the function call, whether
+parentheses or braces, can appear in an argument only in matching pairs;
+the other kind of delimiters may appear singly.  If the arguments
+themselves contain other function calls or variable references, it is
+wisest to use the same kind of delimiters for all the references; write
+@w{@samp{$(subst a,b,$(x))}}, not @w{@samp{$(subst a,b,$@{x@})}}.  This
+is because it is clearer, and because only one type of delimiter is
+matched to find the end of the reference.
+
+The text written for each argument is processed by substitution of
+variables and function calls to produce the argument value, which
+is the text on which the function acts.  The substitution is done in the
+order in which the arguments appear.
+
+Commas and unmatched parentheses or braces cannot appear in the text of an
+argument as written; leading spaces cannot appear in the text of the first
+argument as written.  These characters can be put into the argument value
+by variable substitution.  First define variables @code{comma} and
+@code{space} whose values are isolated comma and space characters, then
+substitute these variables where such characters are wanted, like this:
+
+@example
+@group
+comma:= ,
+empty:=
+space:= $(empty) $(empty)
+foo:= a b c
+bar:= $(subst $(space),$(comma),$(foo))
+# @r{bar is now `a,b,c'.}
+@end group
+@end example
+
+@noindent
+Here the @code{subst} function replaces each space with a comma, through
+the value of @code{foo}, and substitutes the result.
+
+@node Text Functions, File Name Functions, Syntax of Functions, Functions
+@section Functions for String Substitution and Analysis
+@cindex functions, for text
+
+Here are some functions that operate on strings:
+
+@table @code
+@item $(subst @var{from},@var{to},@var{text})
+@findex subst
+Performs a textual replacement on the text @var{text}: each occurrence
+of @var{from} is replaced by @var{to}.  The result is substituted for
+the function call.  For example,
+
+@example
+$(subst ee,EE,feet on the street)
+@end example
+
+substitutes the string @samp{fEEt on the strEEt}.
+
+@item $(patsubst @var{pattern},@var{replacement},@var{text})
+@findex patsubst
+Finds whitespace-separated words in @var{text} that match
+@var{pattern} and replaces them with @var{replacement}.  Here
+@var{pattern} may contain a @samp{%} which acts as a wildcard,
+matching any number of any characters within a word.  If
+@var{replacement} also contains a @samp{%}, the @samp{%} is replaced
+by the text that matched the @samp{%} in @var{pattern}.  Only the first
+@samp{%} in the @var{pattern} and @var{replacement} is treated this
+way; any subsequent @samp{%} is unchanged.@refill
+
+@cindex @code{%}, quoting in @code{patsubst}
+@cindex @code{%}, quoting with @code{\} (backslash)
+@cindex @code{\} (backslash), to quote @code{%}
+@cindex backslash (@code{\}), to quote @code{%}
+@cindex quoting @code{%}, in @code{patsubst}
+@samp{%} characters in @code{patsubst} function invocations can be
+quoted with preceding backslashes (@samp{\}).  Backslashes that would
+otherwise quote @samp{%} characters can be quoted with more backslashes.
+Backslashes that quote @samp{%} characters or other backslashes are
+removed from the pattern before it is compared file names or has a stem
+substituted into it.  Backslashes that are not in danger of quoting
+@samp{%} characters go unmolested.  For example, the pattern
+@file{the\%weird\\%pattern\\} has @samp{the%weird\} preceding the
+operative @samp{%} character, and @samp{pattern\\} following it.  The
+final two backslashes are left alone because they cannot affect any
+@samp{%} character.@refill
+
+Whitespace between words is folded into single space characters;
+leading and trailing whitespace is discarded.
+
+For example,
+
+@example
+$(patsubst %.c,%.o,x.c.c bar.c)
+@end example
+
+@noindent
+produces the value @samp{x.c.o bar.o}.
+
+Substitution references (@pxref{Substitution Refs, ,Substitution
+References}) are a simpler way to get the effect of the @code{patsubst}
+function:
+
+@example
+$(@var{var}:@var{pattern}=@var{replacement})
+@end example
+
+@noindent
+is equivalent to
+
+@example
+$(patsubst @var{pattern},@var{replacement},$(@var{var}))
+@end example
+
+The second shorthand simplifies one of the most common uses of
+@code{patsubst}: replacing the suffix at the end of file names.
+
+@example
+$(@var{var}:@var{suffix}=@var{replacement})
+@end example
+
+@noindent
+is equivalent to
+
+@example
+$(patsubst %@var{suffix},%@var{replacement},$(@var{var}))
+@end example
+
+@noindent
+For example, you might have a list of object files:
+
+@example
+objects = foo.o bar.o baz.o
+@end example
+
+@noindent
+To get the list of corresponding source files, you could simply write:
+
+@example
+$(objects:.o=.c)
+@end example
+
+@noindent
+instead of using the general form:
+
+@example
+$(patsubst %.o,%.c,$(objects))
+@end example
+
+@item $(strip @var{string})
+@cindex stripping whitespace
+@cindex whitespace, stripping
+@cindex spaces, stripping
+@findex strip
+Removes leading and trailing whitespace from @var{string} and replaces
+each internal sequence of one or more whitespace characters with a
+single space.  Thus, @samp{$(strip a b  c )} results in @w{@samp{a b c}}.
+
+The function @code{strip} can be very useful when used in conjunction
+with conditionals.  When comparing something with the empty string
+@samp{} using @code{ifeq} or @code{ifneq}, you usually want a string of
+just whitespace to match the empty string (@pxref{Conditionals}).
+
+Thus, the following may fail to have the desired results:
+
+@example
+.PHONY: all
+ifneq   "$(needs_made)" ""
+all: $(needs_made)
+else
+all:;@@echo 'Nothing to make!'
+endif
+@end example
+
+@noindent
+Replacing the variable reference @w{@samp{$(needs_made)}} with the
+function call @w{@samp{$(strip $(needs_made))}} in the @code{ifneq}
+directive would make it more robust.@refill
+
+@item $(findstring @var{find},@var{in})
+@findex findstring
+@cindex searching for strings
+@cindex finding strings
+@cindex strings, searching for
+Searches @var{in} for an occurrence of @var{find}.  If it occurs, the
+value is @var{find}; otherwise, the value is empty.  You can use this
+function in a conditional to test for the presence of a specific
+substring in a given string.  Thus, the two examples,
+
+@example
+$(findstring a,a b c)
+$(findstring a,b c)
+@end example
+
+@noindent
+produce the values @samp{a} and @samp{} (the empty string),
+respectively.  @xref{Testing Flags}, for a practical application of
+@code{findstring}.@refill
+
+@need 750
+@findex filter
+@cindex filtering words
+@cindex words, filtering
+@item $(filter @var{pattern}@dots{},@var{text})
+Returns all whitespace-separated words in @var{text} that @emph{do} match
+any of the @var{pattern} words, removing any words that @emph{do not}
+match.  The patterns are written using @samp{%}, just like the patterns
+used in the @code{patsubst} function above.@refill
+
+The @code{filter} function can be used to separate out different types
+of strings (such as file names) in a variable.  For example:
+
+@example
+sources := foo.c bar.c baz.s ugh.h
+foo: $(sources)
+        cc $(filter %.c %.s,$(sources)) -o foo
+@end example
+
+@noindent
+says that @file{foo} depends of @file{foo.c}, @file{bar.c},
+@file{baz.s} and @file{ugh.h} but only @file{foo.c}, @file{bar.c} and
+@file{baz.s} should be specified in the command to the
+compiler.@refill
+
+@item $(filter-out @var{pattern}@dots{},@var{text})
+@findex filter-out
+@cindex filtering out words
+@cindex words, filtering out
+Returns all whitespace-separated words in @var{text} that @emph{do not}
+match any of the @var{pattern} words, removing the words that @emph{do}
+match one or more.  This is the exact opposite of the @code{filter}
+function.@refill
+
+For example, given:
+
+@example
+@group
+objects=main1.o foo.o main2.o bar.o
+mains=main1.o main2.o
+@end group
+@end example
+
+@noindent
+the following generates a list which contains all the object files not
+in @samp{mains}:
+
+@example
+$(filter-out $(mains),$(objects))
+@end example
+
+@need 1500
+@findex sort
+@cindex sorting words
+@item $(sort @var{list})
+Sorts the words of @var{list} in lexical order, removing duplicate
+words.  The output is a list of words separated by single spaces.
+Thus,
+
+@example
+$(sort foo bar lose)
+@end example
+
+@noindent
+returns the value @samp{bar foo lose}.
+
+@cindex removing duplicate words
+@cindex duplicate words, removing
+@cindex words, removing duplicates
+Incidentally, since @code{sort} removes duplicate words, you can use
+it for this purpose even if you don't care about the sort order.
+
+@item $(word @var{n},@var{text})
+@findex word
+@cindex word, selecting a
+@cindex selecting a word
+Returns the @var{n}th word of @var{text}.  The legitimate values of
+@var{n} start from 1.  If @var{n} is bigger than the number of words
+in @var{text}, the value is empty.  For example,
+
+@example
+$(word 2, foo bar baz)
+@end example
+
+@noindent
+returns @samp{bar}.
+
+@item $(wordlist @var{s},@var{e},@var{text})
+@findex wordlist
+@cindex words, selecting lists of
+@cindex selecting word lists
+Returns the list of words in @var{text} starting with word @var{s} and
+ending with word @var{e} (inclusive).  The legitimate values of @var{s}
+start from 1; @var{e} may start from 0.  If @var{s} is bigger than the
+number of words in @var{text}, the value is empty.  If @var{e} is
+bigger than the number of words in @var{text}, words up to the end of
+@var{text} are returned.  If @var{s} is greater than @var{e}, nothing
+is returned.  For example,
+
+@example
+$(wordlist 2, 3, foo bar baz)
+@end example
+
+@noindent
+returns @samp{bar baz}.
+
+@c Following item phrased to prevent overfull hbox.  --RJC 17 Jul 92
+@item $(words @var{text})
+@findex words
+@cindex words, finding number
+Returns the number of words in @var{text}.
+Thus, the last word of @var{text} is
+@w{@code{$(word $(words @var{text}),@var{text})}}.@refill
+
+@item $(firstword @var{names}@dots{})
+@findex firstword
+@cindex words, extracting first
+The argument @var{names} is regarded as a series of names, separated
+by whitespace.  The value is the first name in the series.  The rest
+of the names are ignored.
+
+For example,
+
+@example
+$(firstword foo bar)
+@end example
+
+@noindent
+produces the result @samp{foo}.  Although @code{$(firstword
+@var{text})} is the same as @code{$(word 1,@var{text})}, the
+@code{firstword} function is retained for its simplicity.@refill
+
+
+@item $(lastword @var{names}@dots{})
+@findex lastword
+@cindex words, extracting last
+The argument @var{names} is regarded as a series of names, separated
+by whitespace.  The value is the last name in the series.
+
+For example,
+
+@example
+$(lastword foo bar)
+@end example
+
+@noindent
+produces the result @samp{bar}.  Although @code{$(lastword
+@var{text})} is the same as @code{$(word $(words @var{text}),@var{text})},
+the @code{lastword} function was added for its simplicity and better
+performance.@refill
+@end table
+
+
+Here is a realistic example of the use of @code{subst} and
+@code{patsubst}.  Suppose that a makefile uses the @code{VPATH} variable
+to specify a list of directories that @code{make} should search for
+prerequisite files
+(@pxref{General Search, , @code{VPATH} Search Path for All Prerequisites}).
+This example shows how to
+tell the C compiler to search for header files in the same list of
+directories.@refill
+
+The value of @code{VPATH} is a list of directories separated by colons,
+such as @samp{src:../headers}.  First, the @code{subst} function is used to
+change the colons to spaces:
+
+@example
+$(subst :, ,$(VPATH))
+@end example
+
+@noindent
+This produces @samp{src ../headers}.  Then @code{patsubst} is used to turn
+each directory name into a @samp{-I} flag.  These can be added to the
+value of the variable @code{CFLAGS}, which is passed automatically to the C
+compiler, like this:
+
+@example
+override CFLAGS += $(patsubst %,-I%,$(subst :, ,$(VPATH)))
+@end example
+
+@noindent
+The effect is to append the text @samp{-Isrc -I../headers} to the
+previously given value of @code{CFLAGS}.  The @code{override} directive is
+used so that the new value is assigned even if the previous value of
+@code{CFLAGS} was specified with a command argument (@pxref{Override
+Directive, , The @code{override} Directive}).
+
+@node File Name Functions, Conditional Functions, Text Functions, Functions
+@section Functions for File Names
+@cindex functions, for file names
+@cindex file name functions
+
+Several of the built-in expansion functions relate specifically to
+taking apart file names or lists of file names.
+
+Each of the following functions performs a specific transformation on a
+file name.  The argument of the function is regarded as a series of file
+names, separated by whitespace.  (Leading and trailing whitespace is
+ignored.)  Each file name in the series is transformed in the same way and
+the results are concatenated with single spaces between them.
+
+@table @code
+@item $(dir @var{names}@dots{})
+@findex dir
+@cindex directory part
+@cindex file name, directory part
+Extracts the directory-part of each file name in @var{names}.  The
+directory-part of the file name is everything up through (and
+including) the last slash in it.  If the file name contains no slash,
+the directory part is the string @samp{./}.  For example,
+
+@example
+$(dir src/foo.c hacks)
+@end example
+
+@noindent
+produces the result @samp{src/ ./}.
+
+@item $(notdir @var{names}@dots{})
+@findex notdir
+@cindex file name, nondirectory part
+@cindex nondirectory part
+Extracts all but the directory-part of each file name in @var{names}.
+If the file name contains no slash, it is left unchanged.  Otherwise,
+everything through the last slash is removed from it.
+
+A file name that ends with a slash becomes an empty string.  This is
+unfortunate, because it means that the result does not always have the
+same number of whitespace-separated file names as the argument had;
+but we do not see any other valid alternative.
+
+For example,
+
+@example
+$(notdir src/foo.c hacks)
+@end example
+
+@noindent
+produces the result @samp{foo.c hacks}.
+
+@item $(suffix @var{names}@dots{})
+@findex suffix
+@cindex suffix, function to find
+@cindex file name suffix
+Extracts the suffix of each file name in @var{names}.  If the file name
+contains a period, the suffix is everything starting with the last
+period.  Otherwise, the suffix is the empty string.  This frequently
+means that the result will be empty when @var{names} is not, and if
+@var{names} contains multiple file names, the result may contain fewer
+file names.
+
+For example,
+
+@example
+$(suffix src/foo.c src-1.0/bar.c hacks)
+@end example
+
+@noindent
+produces the result @samp{.c .c}.
+
+@item $(basename @var{names}@dots{})
+@findex basename
+@cindex basename
+@cindex file name, basename of
+Extracts all but the suffix of each file name in @var{names}.  If the
+file name contains a period, the basename is everything starting up to
+(and not including) the last period.  Periods in the directory part are
+ignored.  If there is no period, the basename is the entire file name.
+For example,
+
+@example
+$(basename src/foo.c src-1.0/bar hacks)
+@end example
+
+@noindent
+produces the result @samp{src/foo src-1.0/bar hacks}.
+
+@c plural convention with dots (be consistent)
+@item $(addsuffix @var{suffix},@var{names}@dots{})
+@findex addsuffix
+@cindex suffix, adding
+@cindex file name suffix, adding
+The argument @var{names} is regarded as a series of names, separated
+by whitespace; @var{suffix} is used as a unit.  The value of
+@var{suffix} is appended to the end of each individual name and the
+resulting larger names are concatenated with single spaces between
+them.  For example,
+
+@example
+$(addsuffix .c,foo bar)
+@end example
+
+@noindent
+produces the result @samp{foo.c bar.c}.
+
+@item $(addprefix @var{prefix},@var{names}@dots{})
+@findex addprefix
+@cindex prefix, adding
+@cindex file name prefix, adding
+The argument @var{names} is regarded as a series of names, separated
+by whitespace; @var{prefix} is used as a unit.  The value of
+@var{prefix} is prepended to the front of each individual name and the
+resulting larger names are concatenated with single spaces between
+them.  For example,
+
+@example
+$(addprefix src/,foo bar)
+@end example
+
+@noindent
+produces the result @samp{src/foo src/bar}.
+
+@item $(join @var{list1},@var{list2})
+@findex join
+@cindex joining lists of words
+@cindex words, joining lists
+Concatenates the two arguments word by word: the two first words (one
+from each argument) concatenated form the first word of the result, the
+two second words form the second word of the result, and so on.  So the
+@var{n}th word of the result comes from the @var{n}th word of each
+argument.  If one argument has more words that the other, the extra
+words are copied unchanged into the result.
+
+For example, @samp{$(join a b,.c .o)} produces @samp{a.c b.o}.
+
+Whitespace between the words in the lists is not preserved; it is
+replaced with a single space.
+
+This function can merge the results of the @code{dir} and
+@code{notdir} functions, to produce the original list of files which
+was given to those two functions.@refill
+
+@item $(wildcard @var{pattern})
+@findex wildcard
+@cindex wildcard, function
+The argument @var{pattern} is a file name pattern, typically containing
+wildcard characters (as in shell file name patterns).  The result of
+@code{wildcard} is a space-separated list of the names of existing files
+that match the pattern.
+@xref{Wildcards, ,Using Wildcard Characters in File Names}.
+
+@item $(realpath @var{names}@dots{})
+@findex realpath
+@cindex realpath
+@cindex file name, realpath of
+For each file name in @var{names} return the canonical absolute name.
+A canonical name does not contain any @code{.} or @code{..} components,
+nor any repeated path separators (@code{/}) or symlinks.  In case of a
+failure the empty string is returned.  Consult the @code{realpath(3)}
+documentation for a list of possible failure causes.
+
+@item $(abspath @var{names}@dots{})
+@findex abspath
+@cindex abspath
+@cindex file name, abspath of
+For each file name in @var{names} return an absolute name that does
+not contain any @code{.} or @code{..} components, nor any repeated path
+separators (@code{/}).  Note that, in contrast to @code{realpath}
+function, @code{abspath} does not resolve symlinks and does not require
+the file names to refer to an existing file or directory.  Use the
+@code{wildcard} function to test for existence.
+@end table
+
+@node Conditional Functions, Foreach Function, File Name Functions, Functions
+@section Functions for Conditionals
+@findex if
+@cindex conditional expansion
+There are three functions that provide conditional expansion.  A key
+aspect of these functions is that not all of the arguments are
+expanded initially.  Only those arguments which need to be expanded,
+will be expanded.
+
+@table @code
+@item $(if @var{condition},@var{then-part}[,@var{else-part}])
+@findex if
+The @code{if} function provides support for conditional expansion in a
+functional context (as opposed to the GNU @code{make} makefile
+conditionals such as @code{ifeq} (@pxref{Conditional Syntax, ,Syntax of
+Conditionals}).
+
+The first argument, @var{condition}, first has all preceding and
+trailing whitespace stripped, then is expanded.  If it expands to any
+non-empty string, then the condition is considered to be true.  If it
+expands to an empty string, the condition is considered to be false.
+
+If the condition is true then the second argument, @var{then-part}, is
+evaluated and this is used as the result of the evaluation of the entire
+@code{if} function.
+
+If the condition is false then the third argument, @var{else-part}, is
+evaluated and this is the result of the @code{if} function.  If there is
+no third argument, the @code{if} function evaluates to nothing (the
+empty string).
+
+Note that only one of the @var{then-part} or the @var{else-part} will be
+evaluated, never both.  Thus, either can contain side-effects (such as
+@code{shell} function calls, etc.)
+
+@item $(or @var{condition1}[,@var{condition2}[,@var{condition3}@dots{}]])
+@findex or
+The @code{or} function provides a ``short-circuiting'' OR operation.
+Each argument is expanded, in order.  If an argument expands to a
+non-empty string the processing stops and the result of the expansion
+is that string.  If, after all arguments are expanded, all of them are
+false (empty), then the result of the expansion is the empty string.
+
+@item $(and @var{condition1}[,@var{condition2}[,@var{condition3}@dots{}]])
+@findex and
+The @code{and} function provides a ``short-circuiting'' AND operation.
+Each argument is expanded, in order.  If an argument expands to an
+empty string the processing stops and the result of the expansion is
+the empty string.  If all arguments expand to a non-empty string then
+the result of the expansion is the expansion of the last argument.
+
+@end table
+
+@node Foreach Function, File Function, Conditional Functions, Functions
+@section The @code{foreach} Function
+@findex foreach
+@cindex words, iterating over
+
+The @code{foreach} function is very different from other functions.  It
+causes one piece of text to be used repeatedly, each time with a different
+substitution performed on it.  It resembles the @code{for} command in the
+shell @code{sh} and the @code{foreach} command in the C-shell @code{csh}.
+
+The syntax of the @code{foreach} function is:
+
+@example
+$(foreach @var{var},@var{list},@var{text})
+@end example
+
+@noindent
+The first two arguments, @var{var} and @var{list}, are expanded before
+anything else is done; note that the last argument, @var{text}, is
+@strong{not} expanded at the same time.  Then for each word of the expanded
+value of @var{list}, the variable named by the expanded value of @var{var}
+is set to that word, and @var{text} is expanded.  Presumably @var{text}
+contains references to that variable, so its expansion will be different
+each time.
+
+The result is that @var{text} is expanded as many times as there are
+whitespace-separated words in @var{list}.  The multiple expansions of
+@var{text} are concatenated, with spaces between them, to make the result
+of @code{foreach}.
+
+This simple example sets the variable @samp{files} to the list of all files
+in the directories in the list @samp{dirs}:
+
+@example
+dirs := a b c d
+files := $(foreach dir,$(dirs),$(wildcard $(dir)/*))
+@end example
+
+Here @var{text} is @samp{$(wildcard $(dir)/*)}.  The first repetition
+finds the value @samp{a} for @code{dir}, so it produces the same result
+as @samp{$(wildcard a/*)}; the second repetition produces the result
+of @samp{$(wildcard b/*)}; and the third, that of @samp{$(wildcard c/*)}.
+
+This example has the same result (except for setting @samp{dirs}) as
+the following example:
+
+@example
+files := $(wildcard a/* b/* c/* d/*)
+@end example
+
+When @var{text} is complicated, you can improve readability by giving it
+a name, with an additional variable:
+
+@example
+find_files = $(wildcard $(dir)/*)
+dirs := a b c d
+files := $(foreach dir,$(dirs),$(find_files))
+@end example
+
+@noindent
+Here we use the variable @code{find_files} this way.  We use plain @samp{=}
+to define a recursively-expanding variable, so that its value contains an
+actual function call to be re-expanded under the control of @code{foreach};
+a simply-expanded variable would not do, since @code{wildcard} would be
+called only once at the time of defining @code{find_files}.
+
+The @code{foreach} function has no permanent effect on the variable
+@var{var}; its value and flavor after the @code{foreach} function call are
+the same as they were beforehand.  The other values which are taken from
+@var{list} are in effect only temporarily, during the execution of
+@code{foreach}.  The variable @var{var} is a simply-expanded variable
+during the execution of @code{foreach}.  If @var{var} was undefined
+before the @code{foreach} function call, it is undefined after the call.
+@xref{Flavors, ,The Two Flavors of Variables}.@refill
+
+You must take care when using complex variable expressions that result in
+variable names because many strange things are valid variable names, but
+are probably not what you intended.  For example,
+
+@smallexample
+files := $(foreach Esta-escrito-en-espanol!,b c ch,$(find_files))
+@end smallexample
+
+@noindent
+might be useful if the value of @code{find_files} references the variable
+whose name is @samp{Esta-escrito-en-espanol!} (es un nombre bastante largo,
+no?), but it is more likely to be a mistake.
+
+@node File Function, Call Function, Foreach Function, Functions
+@section The @code{file} Function
+@findex file
+@cindex writing to a file
+@cindex file, writing to
+
+The @code{file} function allows the makefile to write to a file.  Two
+modes of writing are supported: overwrite, where the text is written
+to the beginning of the file and any existing content is lost, and
+append, where the text is written to the end of the file, preserving
+the existing content.  In all cases the file is created if it does not
+exist.
+
+The syntax of the @code{file} function is:
+
+@example
+$(file @var{op} @var{filename}[,@var{text}])
+@end example
+
+The operator @var{op} can be either @code{>} which indicates overwrite
+mode, or @code{>>} which indicates append mode.  The @var{filename}
+indicates the file to be written to.  There may optionally be
+whitespace between the operator and the file name.
+
+When the @code{file} function is expanded all its arguments are
+expanded first, then the file indicated by @var{filename} will be
+opened in the mode described by @var{op}.  Finally @var{text} will be
+written to the file.  If @var{text} does not already end in a newline,
+even if empty, a final newline will be written.  If the @var{text}
+argument is not given, nothing will be written.  The result of
+evaluating the @code{file} function is always the empty string.
+
+It is a fatal error if the file cannot be opened for writing, or if
+the write operation fails.
+
+For example, the @code{file} function can be useful if your build
+system has a limited command line size and your recipe runs a command
+that can accept arguments from a file as well.  Many commands use the
+convention that an argument prefixed with an @code{@@} specifies a
+file containing more arguments.  Then you might write your recipe in
+this way:
+
+@example
+@group
+program: $(OBJECTS)
+        $(file >$@@.in,$^)
+        $(CMD) $(CMDFLAGS) @@$@@.in
+        @@rm $@@.in
+@end group
+@end example
+
+If the command required each argument to be on a separate line of the
+input file, you might write your recipe like this:
+
+@example
+@group
+program: $(OBJECTS)
+        $(file >$@@.in) $(foreach O,$^,$(file >>$@@.in,$O))
+        $(CMD) $(CMDFLAGS) @@$@@.in
+        @@rm $@@.in
+@end group
+@end example
+
+@node Call Function, Value Function, File Function, Functions
+@section The @code{call} Function
+@findex call
+@cindex functions, user defined
+@cindex user defined functions
+
+The @code{call} function is unique in that it can be used to create new
+parameterized functions.  You can write a complex expression as the
+value of a variable, then use @code{call} to expand it with different
+values.
+
+The syntax of the @code{call} function is:
+
+@example
+$(call @var{variable},@var{param},@var{param},@dots{})
+@end example
+
+When @code{make} expands this function, it assigns each @var{param} to
+temporary variables @code{$(1)}, @code{$(2)}, etc.  The variable
+@code{$(0)} will contain @var{variable}.  There is no maximum number of
+parameter arguments.  There is no minimum, either, but it doesn't make
+sense to use @code{call} with no parameters.
+
+Then @var{variable} is expanded as a @code{make} variable in the context
+of these temporary assignments.  Thus, any reference to @code{$(1)} in
+the value of @var{variable} will resolve to the first @var{param} in the
+invocation of @code{call}.
+
+Note that @var{variable} is the @emph{name} of a variable, not a
+@emph{reference} to that variable.  Therefore you would not normally use
+a @samp{$} or parentheses when writing it.  (You can, however, use a
+variable reference in the name if you want the name not to be a
+constant.)
+
+If @var{variable} is the name of a built-in function, the built-in function
+is always invoked (even if a @code{make} variable by that name also
+exists).
+
+The @code{call} function expands the @var{param} arguments before
+assigning them to temporary variables.  This means that @var{variable}
+values containing references to built-in functions that have special
+expansion rules, like @code{foreach} or @code{if}, may not work as you
+expect.
+
+Some examples may make this clearer.
+
+This macro simply reverses its arguments:
+
+@smallexample
+reverse = $(2) $(1)
+
+foo = $(call reverse,a,b)
+@end smallexample
+
+@noindent
+Here @var{foo} will contain @samp{b a}.
+
+This one is slightly more interesting: it defines a macro to search for
+the first instance of a program in @code{PATH}:
+
+@smallexample
+pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH)))))
+
+LS := $(call pathsearch,ls)
+@end smallexample
+
+@noindent
+Now the variable LS contains @code{/bin/ls} or similar.
+
+The @code{call} function can be nested.  Each recursive invocation gets
+its own local values for @code{$(1)}, etc.@: that mask the values of
+higher-level @code{call}.  For example, here is an implementation of a
+@dfn{map} function:
+
+@smallexample
+map = $(foreach a,$(2),$(call $(1),$(a)))
+@end smallexample
+
+Now you can @var{map} a function that normally takes only one argument,
+such as @code{origin}, to multiple values in one step:
+
+@smallexample
+o = $(call map,origin,o map MAKE)
+@end smallexample
+
+and end up with @var{o} containing something like @samp{file file default}.
+
+A final caution: be careful when adding whitespace to the arguments to
+@code{call}.  As with other functions, any whitespace contained in the
+second and subsequent arguments is kept; this can cause strange
+effects.  It's generally safest to remove all extraneous whitespace when
+providing parameters to @code{call}.
+
+@node Value Function, Eval Function, Call Function, Functions
+@comment  node-name,  next,  previous,  up
+@section The @code{value} Function
+@findex value
+@cindex variables, unexpanded value
+
+The @code{value} function provides a way for you to use the value of a
+variable @emph{without} having it expanded.  Please note that this
+does not undo expansions which have already occurred; for example if
+you create a simply expanded variable its value is expanded during the
+definition; in that case the @code{value} function will return the
+same result as using the variable directly.
+
+The syntax of the @code{value} function is:
+
+@example
+$(value @var{variable})
+@end example
+
+Note that @var{variable} is the @emph{name} of a variable, not a
+@emph{reference} to that variable.  Therefore you would not normally
+use a @samp{$} or parentheses when writing it.  (You can, however, use
+a variable reference in the name if you want the name not to be a
+constant.)
+
+The result of this function is a string containing the value of
+@var{variable}, without any expansion occurring.  For example, in this
+makefile:
+
+@example
+@group
+FOO = $PATH
+
+all:
+        @@echo $(FOO)
+        @@echo $(value FOO)
+@end group
+@end example
+
+@noindent
+The first output line would be @code{ATH}, since the ``$P'' would be
+expanded as a @code{make} variable, while the second output line would
+be the current value of your @code{$PATH} environment variable, since
+the @code{value} function avoided the expansion.
+
+The @code{value} function is most often used in conjunction with the
+@code{eval} function (@pxref{Eval Function}).
+
+@node Eval Function, Origin Function, Value Function, Functions
+@comment  node-name,  next,  previous,  up
+@section The @code{eval} Function
+@findex eval
+@cindex evaluating makefile syntax
+@cindex makefile syntax, evaluating
+
+The @code{eval} function is very special: it allows you to define new
+makefile constructs that are not constant; which are the result of
+evaluating other variables and functions.  The argument to the
+@code{eval} function is expanded, then the results of that expansion
+are parsed as makefile syntax.  The expanded results can define new
+@code{make} variables, targets, implicit or explicit rules, etc.
+
+The result of the @code{eval} function is always the empty string;
+thus, it can be placed virtually anywhere in a makefile without
+causing syntax errors.
+
+It's important to realize that the @code{eval} argument is expanded
+@emph{twice}; first by the @code{eval} function, then the results of
+that expansion are expanded again when they are parsed as makefile
+syntax.  This means you may need to provide extra levels of escaping
+for ``$'' characters when using @code{eval}.  The @code{value}
+function (@pxref{Value Function}) can sometimes be useful in these
+situations, to circumvent unwanted expansions.
+
+Here is an example of how @code{eval} can be used; this example
+combines a number of concepts and other functions.  Although it might
+seem overly complex to use @code{eval} in this example, rather than
+just writing out the rules, consider two things: first, the template
+definition (in @code{PROGRAM_template}) could need to be much more
+complex than it is here; and second, you might put the complex,
+``generic'' part of this example into another makefile, then include
+it in all the individual makefiles.  Now your individual makefiles are
+quite straightforward.
+
+@example
+@group
+PROGRAMS    = server client
+
+server_OBJS = server.o server_priv.o server_access.o
+server_LIBS = priv protocol
+
+client_OBJS = client.o client_api.o client_mem.o
+client_LIBS = protocol
+
+# Everything after this is generic
+
+.PHONY: all
+all: $(PROGRAMS)
+
+define PROGRAM_template =
+ $(1): $$($(1)_OBJS) $$($(1)_LIBS:%=-l%)
+ ALL_OBJS   += $$($(1)_OBJS)
+endef
+
+$(foreach prog,$(PROGRAMS),$(eval $(call PROGRAM_template,$(prog))))
+
+$(PROGRAMS):
+        $(LINK.o) $^ $(LDLIBS) -o $@@
+
+clean:
+        rm -f $(ALL_OBJS) $(PROGRAMS)
+@end group
+@end example
+
+@node Origin Function, Flavor Function, Eval Function, Functions
+@section The @code{origin} Function
+@findex origin
+@cindex variables, origin of
+@cindex origin of variable
+
+The @code{origin} function is unlike most other functions in that it does
+not operate on the values of variables; it tells you something @emph{about}
+a variable.  Specifically, it tells you where it came from.
+
+The syntax of the @code{origin} function is:
+
+@example
+$(origin @var{variable})
+@end example
+
+Note that @var{variable} is the @emph{name} of a variable to inquire about,
+not a @emph{reference} to that variable.  Therefore you would not normally
+use a @samp{$} or parentheses when writing it.  (You can, however, use a
+variable reference in the name if you want the name not to be a constant.)
+
+The result of this function is a string telling you how the variable
+@var{variable} was defined:
+
+@table @samp
+@item undefined
+
+if @var{variable} was never defined.
+
+@item default
+
+if @var{variable} has a default definition, as is usual with @code{CC}
+and so on.  @xref{Implicit Variables, ,Variables Used by Implicit Rules}.
+Note that if you have redefined a default variable, the @code{origin}
+function will return the origin of the later definition.
+
+@item environment
+
+if @var{variable} was inherited from the environment provided to
+@code{make}.
+
+@item environment override
+
+if @var{variable} was inherited from the environment provided to
+@code{make}, and is overriding a setting for @var{variable} in the
+makefile as a result of the @w{@samp{-e}} option (@pxref{Options
+Summary, ,Summary of Options}).@refill
+
+@item file
+
+if @var{variable} was defined in a makefile.
+
+@item command line
+
+if @var{variable} was defined on the command line.
+
+@item override
+
+if @var{variable} was defined with an @code{override} directive in a
+makefile (@pxref{Override Directive, ,The @code{override} Directive}).
+
+@item automatic
+
+if @var{variable} is an automatic variable defined for the execution
+of the recipe for each rule (@pxref{Automatic Variables}).
+@end table
+
+This information is primarily useful (other than for your curiosity) to
+determine if you want to believe the value of a variable.  For example,
+suppose you have a makefile @file{foo} that includes another makefile
+@file{bar}.  You want a variable @code{bletch} to be defined in @file{bar}
+if you run the command @w{@samp{make -f bar}}, even if the environment contains
+a definition of @code{bletch}.  However, if @file{foo} defined
+@code{bletch} before including @file{bar}, you do not want to override that
+definition.  This could be done by using an @code{override} directive in
+@file{foo}, giving that definition precedence over the later definition in
+@file{bar}; unfortunately, the @code{override} directive would also
+override any command line definitions.  So, @file{bar} could
+include:@refill
+
+@example
+@group
+ifdef bletch
+ifeq "$(origin bletch)" "environment"
+bletch = barf, gag, etc.
+endif
+endif
+@end group
+@end example
+
+@noindent
+If @code{bletch} has been defined from the environment, this will redefine
+it.
+
+If you want to override a previous definition of @code{bletch} if it came
+from the environment, even under @samp{-e}, you could instead write:
+
+@example
+@group
+ifneq "$(findstring environment,$(origin bletch))" ""
+bletch = barf, gag, etc.
+endif
+@end group
+@end example
+
+Here the redefinition takes place if @samp{$(origin bletch)} returns either
+@samp{environment} or @samp{environment override}.
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@node Flavor Function, Make Control Functions, Origin Function, Functions
+@section The @code{flavor} Function
+@findex flavor
+@cindex variables, flavor of
+@cindex flavor of variable
+
+The @code{flavor} function, like the @code{origin} function, does not
+operate on the values of variables but rather it tells you something
+@emph{about} a variable.  Specifically, it tells you the flavor of a
+variable (@pxref{Flavors, ,The Two Flavors of Variables}).
+
+The syntax of the @code{flavor} function is:
+
+@example
+$(flavor @var{variable})
+@end example
+
+Note that @var{variable} is the @emph{name} of a variable to inquire about,
+not a @emph{reference} to that variable.  Therefore you would not normally
+use a @samp{$} or parentheses when writing it.  (You can, however, use a
+variable reference in the name if you want the name not to be a constant.)
+
+The result of this function is a string that identifies the flavor of the
+variable @var{variable}:
+
+@table @samp
+@item undefined
+
+if @var{variable} was never defined.
+
+@item recursive
+
+if @var{variable} is a recursively expanded variable.
+
+@item simple
+
+if @var{variable} is a simply expanded variable.
+
+@end table
+
+@node Make Control Functions, Shell Function, Flavor Function, Functions
+@section Functions That Control Make
+@cindex functions, for controlling make
+@cindex controlling make
+
+These functions control the way make runs.  Generally, they are used to
+provide information to the user of the makefile or to cause make to stop
+if some sort of environmental error is detected.
+
+@table @code
+@item $(error @var{text}@dots{})
+@findex error
+@cindex error, stopping on
+@cindex stopping make
+Generates a fatal error where the message is @var{text}.  Note that
+the error is generated whenever this function is evaluated.  So, if
+you put it inside a recipe or on the right side of a recursive
+variable assignment, it won't be evaluated until later.  The
+@var{text} will be expanded before the error is generated.
+
+For example,
+
+@example
+ifdef ERROR1
+$(error error is $(ERROR1))
+endif
+@end example
+
+@noindent
+will generate a fatal error during the read of the makefile if the
+@code{make} variable @code{ERROR1} is defined.  Or,
+
+@example
+ERR = $(error found an error!)
+
+.PHONY: err
+err: ; $(ERR)
+@end example
+
+@noindent
+will generate a fatal error while @code{make} is running, if the
+@code{err} target is invoked.
+
+@item $(warning @var{text}@dots{})
+@findex warning
+@cindex warnings, printing
+@cindex printing user warnings
+This function works similarly to the @code{error} function, above,
+except that @code{make} doesn't exit.  Instead, @var{text} is expanded
+and the resulting message is displayed, but processing of the makefile
+continues.
+
+The result of the expansion of this function is the empty string.
+
+@item $(info @var{text}@dots{})
+@findex info
+@cindex printing messages
+This function does nothing more than print its (expanded) argument(s)
+to standard output.  No makefile name or line number is added.  The
+result of the expansion of this function is the empty string.
+@end table
+
+@node Shell Function, Guile Function, Make Control Functions, Functions
+@section The @code{shell} Function
+@findex shell
+@cindex command expansion
+@cindex backquotes
+@cindex shell command, function for
+
+The @code{shell} function is unlike any other function other than the
+@code{wildcard} function
+(@pxref{Wildcard Function, ,The Function @code{wildcard}}) in that it
+communicates with the world outside of @code{make}.
+
+The @code{shell} function performs the same function that backquotes
+(@samp{`}) perform in most shells: it does @dfn{command expansion}.
+This means that it takes as an argument a shell command and evaluates
+to the output of the command.  The only processing @code{make} does on
+the result is to convert each newline (or carriage-return / newline
+pair) to a single space.  If there is a trailing (carriage-return
+and) newline it will simply be removed.@refill
+
+The commands run by calls to the @code{shell} function are run when the
+function calls are expanded (@pxref{Reading Makefiles, , How
+@code{make} Reads a Makefile}).  Because this function involves
+spawning a new shell, you should carefully consider the performance
+implications of using the @code{shell} function within recursively
+expanded variables vs.@: simply expanded variables (@pxref{Flavors, ,The
+Two Flavors of Variables}).
+
+Here are some examples of the use of the @code{shell} function:
+
+@example
+contents := $(shell cat foo)
+@end example
+
+@noindent
+sets @code{contents} to the contents of the file @file{foo}, with a space
+(rather than a newline) separating each line.
+
+@example
+files := $(shell echo *.c)
+@end example
+
+@noindent
+sets @code{files} to the expansion of @samp{*.c}.  Unless @code{make} is
+using a very strange shell, this has the same result as
+@w{@samp{$(wildcard *.c)}} (as long as at least one @samp{.c} file
+exists).@refill
+
+@node Guile Function,  , Shell Function, Functions
+@section The @code{guile} Function
+@findex guile
+@cindex Guile
+
+If GNU @code{make} is built with support for GNU Guile as an embedded
+extension language then the @code{guile} function will be available.
+The @code{guile} function takes one argument which is first expanded
+by @code{make} in the normal fashion, then passed to the GNU Guile
+evaluator.  The result of the evaluator is converted into a string and
+used as the expansion of the @code{guile} function in the makefile.
+See @ref{Guile Integration, ,GNU Guile Integration} for details on
+writing extensions to @code{make} in Guile.
+
+You can determine whether GNU Guile support is available by checking
+the @code{.FEATURES} variable for the word @var{guile}.
+
+@node Running, Implicit Rules, Functions, Top
+@chapter How to Run @code{make}
+
+A makefile that says how to recompile a program can be used in more
+than one way.  The simplest use is to recompile every file that is out
+of date.  Usually, makefiles are written so that if you run
+@code{make} with no arguments, it does just that.
+
+But you might want to update only some of the files; you might want to use
+a different compiler or different compiler options; you might want just to
+find out which files are out of date without changing them.
+
+By giving arguments when you run @code{make}, you can do any of these
+things and many others.
+
+@cindex exit status of make
+The exit status of @code{make} is always one of three values:
+@table @code
+@item 0
+The exit status is zero if @code{make} is successful.
+@item 2
+The exit status is two if @code{make} encounters any errors.
+It will print messages describing the particular errors.
+@item 1
+The exit status is one if you use the @samp{-q} flag and @code{make}
+determines that some target is not already up to date.
+@xref{Instead of Execution, ,Instead of Executing Recipes}.
+@end table
+
+@menu
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+@end menu
+
+@node Makefile Arguments, Goals, Running, Running
+@section Arguments to Specify the Makefile
+@cindex @code{--file}
+@cindex @code{--makefile}
+@cindex @code{-f}
+
+The way to specify the name of the makefile is with the @samp{-f} or
+@samp{--file} option (@samp{--makefile} also works).  For example,
+@samp{-f altmake} says to use the file @file{altmake} as the makefile.
+
+If you use the @samp{-f} flag several times and follow each @samp{-f}
+with an argument, all the specified files are used jointly as
+makefiles.
+
+If you do not use the @samp{-f} or @samp{--file} flag, the default is
+to try @file{GNUmakefile}, @file{makefile}, and @file{Makefile}, in
+that order, and use the first of these three which exists or can be made
+(@pxref{Makefiles, ,Writing Makefiles}).@refill
+
+@node Goals, Instead of Execution, Makefile Arguments, Running
+@section Arguments to Specify the Goals
+@cindex goal, how to specify
+
+The @dfn{goals} are the targets that @code{make} should strive ultimately
+to update.  Other targets are updated as well if they appear as
+prerequisites of goals, or prerequisites of prerequisites of goals, etc.
+
+By default, the goal is the first target in the makefile (not counting
+targets that start with a period).  Therefore, makefiles are usually
+written so that the first target is for compiling the entire program or
+programs they describe.  If the first rule in the makefile has several
+targets, only the first target in the rule becomes the default goal, not
+the whole list.  You can manage the selection of the default goal from
+within your makefile using the @code{.DEFAULT_GOAL} variable
+(@pxref{Special Variables, , Other Special Variables}).
+
+You can also specify a different goal or goals with command line
+arguments to @code{make}.  Use the name of the goal as an argument.
+If you specify several goals, @code{make} processes each of them in
+turn, in the order you name them.
+
+Any target in the makefile may be specified as a goal (unless it
+starts with @samp{-} or contains an @samp{=}, in which case it will be
+parsed as a switch or variable definition, respectively).  Even
+targets not in the makefile may be specified, if @code{make} can find
+implicit rules that say how to make them.
+
+@vindex MAKECMDGOALS
+@code{Make} will set the special variable @code{MAKECMDGOALS} to the
+list of goals you specified on the command line.  If no goals were given
+on the command line, this variable is empty.  Note that this variable
+should be used only in special circumstances.
+
+An example of appropriate use is to avoid including @file{.d} files
+during @code{clean} rules (@pxref{Automatic Prerequisites}), so
+@code{make} won't create them only to immediately remove them
+again:@refill
+
+@example
+@group
+sources = foo.c bar.c
+
+ifneq ($(MAKECMDGOALS),clean)
+include $(sources:.c=.d)
+endif
+@end group
+@end example
+
+One use of specifying a goal is if you want to compile only a part of
+the program, or only one of several programs.  Specify as a goal each
+file that you wish to remake.  For example, consider a directory containing
+several programs, with a makefile that starts like this:
+
+@example
+.PHONY: all
+all: size nm ld ar as
+@end example
+
+If you are working on the program @code{size}, you might want to say
+@w{@samp{make size}} so that only the files of that program are recompiled.
+
+Another use of specifying a goal is to make files that are not normally
+made.  For example, there may be a file of debugging output, or a
+version of the program that is compiled specially for testing, which has
+a rule in the makefile but is not a prerequisite of the default goal.
+
+Another use of specifying a goal is to run the recipe associated with
+a phony target (@pxref{Phony Targets}) or empty target (@pxref{Empty
+Targets, ,Empty Target Files to Record Events}).  Many makefiles contain
+a phony target named @file{clean} which deletes everything except source
+files.  Naturally, this is done only if you request it explicitly with
+@w{@samp{make clean}}.  Following is a list of typical phony and empty
+target names.  @xref{Standard Targets}, for a detailed list of all the
+standard target names which GNU software packages use.
+
+@table @file
+@item all
+@cindex @code{all} @r{(standard target)}
+Make all the top-level targets the makefile knows about.
+
+@item clean
+@cindex @code{clean} @r{(standard target)}
+Delete all files that are normally created by running @code{make}.
+
+@item mostlyclean
+@cindex @code{mostlyclean} @r{(standard target)}
+Like @samp{clean}, but may refrain from deleting a few files that people
+normally don't want to recompile.  For example, the @samp{mostlyclean}
+target for GCC does not delete @file{libgcc.a}, because recompiling it
+is rarely necessary and takes a lot of time.
+
+@item distclean
+@cindex @code{distclean} @r{(standard target)}
+@itemx realclean
+@cindex @code{realclean} @r{(standard target)}
+@itemx clobber
+@cindex @code{clobber} @r{(standard target)}
+Any of these targets might be defined to delete @emph{more} files than
+@samp{clean} does.  For example, this would delete configuration files
+or links that you would normally create as preparation for compilation,
+even if the makefile itself cannot create these files.
+
+@item install
+@cindex @code{install} @r{(standard target)}
+Copy the executable file into a directory that users typically search
+for commands; copy any auxiliary files that the executable uses into
+the directories where it will look for them.
+
+@item print
+@cindex @code{print} @r{(standard target)}
+Print listings of the source files that have changed.
+
+@item tar
+@cindex @code{tar} @r{(standard target)}
+Create a tar file of the source files.
+
+@item shar
+@cindex @code{shar} @r{(standard target)}
+Create a shell archive (shar file) of the source files.
+
+@item dist
+@cindex @code{dist} @r{(standard target)}
+Create a distribution file of the source files.  This might
+be a tar file, or a shar file, or a compressed version of one of the
+above, or even more than one of the above.
+
+@item TAGS
+@cindex @code{TAGS} @r{(standard target)}
+Update a tags table for this program.
+
+@item check
+@cindex @code{check} @r{(standard target)}
+@itemx test
+@cindex @code{test} @r{(standard target)}
+Perform self tests on the program this makefile builds.
+@end table
+
+@node Instead of Execution, Avoiding Compilation, Goals, Running
+@section Instead of Executing Recipes
+@cindex execution, instead of
+@cindex recipes, instead of executing
+
+The makefile tells @code{make} how to tell whether a target is up to date,
+and how to update each target.  But updating the targets is not always
+what you want.  Certain options specify other activities for @code{make}.
+
+@comment Extra blank lines make it print better.
+@table @samp
+@item -n
+@itemx --just-print
+@itemx --dry-run
+@itemx --recon
+@cindex @code{--just-print}
+@cindex @code{--dry-run}
+@cindex @code{--recon}
+@cindex @code{-n}
+
+``No-op''.  Causes @code{make} to print the recipes that are needed to
+make the targets up to date, but not actually execute them.  Note that
+some recipes are still executed, even with this flag (@pxref{MAKE
+Variable, ,How the @code{MAKE} Variable Works}).  Also any recipes
+needed to update included makefiles are still executed
+(@pxref{Remaking Makefiles, ,How Makefiles Are Remade}).
+
+@item -t
+@itemx --touch
+@cindex @code{--touch}
+@cindex touching files
+@cindex target, touching
+@cindex @code{-t}
+
+``Touch''.  Marks targets as up to date without actually changing
+them.  In other words, @code{make} pretends to update the targets but
+does not really change their contents; instead only their modified
+times are updated.
+
+@item -q
+@itemx --question
+@cindex @code{--question}
+@cindex @code{-q}
+@cindex question mode
+
+``Question''.  Silently check whether the targets are up to date, but
+do not execute recipes; the exit code shows whether any updates are
+needed.
+
+@item -W @var{file}
+@itemx --what-if=@var{file}
+@itemx --assume-new=@var{file}
+@itemx --new-file=@var{file}
+@cindex @code{--what-if}
+@cindex @code{-W}
+@cindex @code{--assume-new}
+@cindex @code{--new-file}
+@cindex what if
+@cindex files, assuming new
+
+``What if''.  Each @samp{-W} flag is followed by a file name.  The given
+files' modification times are recorded by @code{make} as being the present
+time, although the actual modification times remain the same.
+You can use the @samp{-W} flag in conjunction with the @samp{-n} flag
+to see what would happen if you were to modify specific files.@refill
+@end table
+
+With the @samp{-n} flag, @code{make} prints the recipe that it would
+normally execute but usually does not execute it.
+
+With the @samp{-t} flag, @code{make} ignores the recipes in the rules
+and uses (in effect) the command @code{touch} for each target that needs to
+be remade.  The @code{touch} command is also printed, unless @samp{-s} or
+@code{.SILENT} is used.  For speed, @code{make} does not actually invoke
+the program @code{touch}.  It does the work directly.
+
+With the @samp{-q} flag, @code{make} prints nothing and executes no
+recipes, but the exit status code it returns is zero if and only if the
+targets to be considered are already up to date.  If the exit status is
+one, then some updating needs to be done.  If @code{make} encounters an
+error, the exit status is two, so you can distinguish an error from a
+target that is not up to date.
+
+It is an error to use more than one of these three flags in the same
+invocation of @code{make}.
+
+@cindex +, and recipe execution
+The @samp{-n}, @samp{-t}, and @samp{-q} options do not affect recipe
+lines that begin with @samp{+} characters or contain the strings
+@samp{$(MAKE)} or @samp{$@{MAKE@}}.  Note that only the line containing
+the @samp{+} character or the strings @samp{$(MAKE)} or @samp{$@{MAKE@}}
+is run regardless of these options.  Other lines in the same rule are
+not run unless they too begin with @samp{+} or contain @samp{$(MAKE)} or
+@samp{$@{MAKE@}} (@xref{MAKE Variable, ,How the @code{MAKE} Variable Works}.)
+
+@cindex phony targets and recipe execution
+The @samp{-t} flag prevents phony targets (@pxref{Phony Targets}) from
+being updated, unless there are recipe lines beginning with @samp{+}
+or containing @samp{$(MAKE)} or @samp{$@{MAKE@}}.
+
+The @samp{-W} flag provides two features:
+
+@itemize @bullet
+@item
+If you also use the @samp{-n} or @samp{-q} flag, you can see what
+@code{make} would do if you were to modify some files.
+
+@item
+Without the @samp{-n} or @samp{-q} flag, when @code{make} is actually
+executing recipes, the @samp{-W} flag can direct @code{make} to act as
+if some files had been modified, without actually running the recipes
+for those files.@refill
+@end itemize
+
+Note that the options @samp{-p} and @samp{-v} allow you to obtain other
+information about @code{make} or about the makefiles in use
+(@pxref{Options Summary, ,Summary of Options}).@refill
+
+@node Avoiding Compilation, Overriding, Instead of Execution, Running
+@section Avoiding Recompilation of Some Files
+@cindex @code{-o}
+@cindex @code{--old-file}
+@cindex @code{--assume-old}
+@cindex files, assuming old
+@cindex files, avoiding recompilation of
+@cindex recompilation, avoiding
+
+Sometimes you may have changed a source file but you do not want to
+recompile all the files that depend on it.  For example, suppose you add
+a macro or a declaration to a header file that many other files depend
+on.  Being conservative, @code{make} assumes that any change in the
+header file requires recompilation of all dependent files, but you know
+that they do not need to be recompiled and you would rather not waste
+the time waiting for them to compile.
+
+If you anticipate the problem before changing the header file, you can
+use the @samp{-t} flag.  This flag tells @code{make} not to run the
+recipes in the rules, but rather to mark the target up to date by
+changing its last-modification date.  You would follow this procedure:
+
+@enumerate
+@item
+Use the command @samp{make} to recompile the source files that really
+need recompilation, ensuring that the object files are up-to-date
+before you begin.
+
+@item
+Make the changes in the header files.
+
+@item
+Use the command @samp{make -t} to mark all the object files as
+up to date.  The next time you run @code{make}, the changes in the
+header files will not cause any recompilation.
+@end enumerate
+
+If you have already changed the header file at a time when some files
+do need recompilation, it is too late to do this.  Instead, you can
+use the @w{@samp{-o @var{file}}} flag, which marks a specified file as
+``old'' (@pxref{Options Summary, ,Summary of Options}).  This means
+that the file itself will not be remade, and nothing else will be
+remade on its account.  Follow this procedure:
+
+@enumerate
+@item
+Recompile the source files that need compilation for reasons independent
+of the particular header file, with @samp{make -o @var{headerfile}}.
+If several header files are involved, use a separate @samp{-o} option
+for each header file.
+
+@item
+Touch all the object files with @samp{make -t}.
+@end enumerate
+
+@node Overriding, Testing, Avoiding Compilation, Running
+@section Overriding Variables
+@cindex overriding variables with arguments
+@cindex variables, overriding with arguments
+@cindex command line variables
+@cindex variables, command line
+
+An argument that contains @samp{=} specifies the value of a variable:
+@samp{@var{v}=@var{x}} sets the value of the variable @var{v} to @var{x}.
+If you specify a value in this way, all ordinary assignments of the same
+variable in the makefile are ignored; we say they have been
+@dfn{overridden} by the command line argument.
+
+The most common way to use this facility is to pass extra flags to
+compilers.  For example, in a properly written makefile, the variable
+@code{CFLAGS} is included in each recipe that runs the C compiler, so a
+file @file{foo.c} would be compiled something like this:
+
+@example
+cc -c $(CFLAGS) foo.c
+@end example
+
+Thus, whatever value you set for @code{CFLAGS} affects each compilation
+that occurs.  The makefile probably specifies the usual value for
+@code{CFLAGS}, like this:
+
+@example
+CFLAGS=-g
+@end example
+
+Each time you run @code{make}, you can override this value if you
+wish.  For example, if you say @samp{make CFLAGS='-g -O'}, each C
+compilation will be done with @samp{cc -c -g -O}.  (This also
+illustrates how you can use quoting in the shell to enclose spaces and
+other special characters in the value of a variable when you override
+it.)
+
+The variable @code{CFLAGS} is only one of many standard variables that
+exist just so that you can change them this way.  @xref{Implicit
+Variables, , Variables Used by Implicit Rules}, for a complete list.
+
+You can also program the makefile to look at additional variables of your
+own, giving the user the ability to control other aspects of how the
+makefile works by changing the variables.
+
+When you override a variable with a command line argument, you can
+define either a recursively-expanded variable or a simply-expanded
+variable.  The examples shown above make a recursively-expanded
+variable; to make a simply-expanded variable, write @samp{:=} or
+@samp{::=} instead of @samp{=}.  But, unless you want to include a
+variable reference or function call in the @emph{value} that you
+specify, it makes no difference which kind of variable you create.
+
+There is one way that the makefile can change a variable that you have
+overridden.  This is to use the @code{override} directive, which is a line
+that looks like this: @samp{override @var{variable} = @var{value}}
+(@pxref{Override Directive, ,The @code{override} Directive}).
+
+@node Testing, Options Summary, Overriding, Running
+@section Testing the Compilation of a Program
+@cindex testing compilation
+@cindex compilation, testing
+
+Normally, when an error happens in executing a shell command, @code{make}
+gives up immediately, returning a nonzero status.  No further recipes are
+executed for any target.  The error implies that the goal cannot be
+correctly remade, and @code{make} reports this as soon as it knows.
+
+When you are compiling a program that you have just changed, this is not
+what you want.  Instead, you would rather that @code{make} try compiling
+every file that can be tried, to show you as many compilation errors
+as possible.
+
+@cindex @code{-k}
+@cindex @code{--keep-going}
+On these occasions, you should use the @samp{-k} or
+@samp{--keep-going} flag.  This tells @code{make} to continue to
+consider the other prerequisites of the pending targets, remaking them
+if necessary, before it gives up and returns nonzero status.  For
+example, after an error in compiling one object file, @samp{make -k}
+will continue compiling other object files even though it already
+knows that linking them will be impossible.  In addition to continuing
+after failed shell commands, @samp{make -k} will continue as much as
+possible after discovering that it does not know how to make a target
+or prerequisite file.  This will always cause an error message, but
+without @samp{-k}, it is a fatal error (@pxref{Options Summary,
+,Summary of Options}).@refill
+
+The usual behavior of @code{make} assumes that your purpose is to get the
+goals up to date; once @code{make} learns that this is impossible, it might
+as well report the failure immediately.  The @samp{-k} flag says that the
+real purpose is to test as much as possible of the changes made in the
+program, perhaps to find several independent problems so that you can
+correct them all before the next attempt to compile.  This is why Emacs'
+@kbd{M-x compile} command passes the @samp{-k} flag by default.
+
+@node Options Summary,  , Testing, Running
+@section Summary of Options
+@cindex options
+@cindex flags
+@cindex switches
+
+Here is a table of all the options @code{make} understands:
+
+@table @samp
+@item -b
+@cindex @code{-b}
+@itemx -m
+@cindex @code{-m}
+These options are ignored for compatibility with other versions of @code{make}.
+
+@item -B
+@cindex @code{-B}
+@itemx --always-make
+@cindex @code{--always-make}
+Consider all targets out-of-date.  GNU @code{make} proceeds to
+consider targets and their prerequisites using the normal algorithms;
+however, all targets so considered are always remade regardless of the
+status of their prerequisites.  To avoid infinite recursion, if
+@code{MAKE_RESTARTS} (@pxref{Special Variables, , Other Special
+Variables}) is set to a number greater than 0 this option is disabled
+when considering whether to remake makefiles (@pxref{Remaking
+Makefiles, , How Makefiles Are Remade}).
+
+@item -C @var{dir}
+@cindex @code{-C}
+@itemx --directory=@var{dir}
+@cindex @code{--directory}
+Change to directory @var{dir} before reading the makefiles.  If multiple
+@samp{-C} options are specified, each is interpreted relative to the
+previous one: @samp{-C / -C etc} is equivalent to @samp{-C /etc}.
+This is typically used with recursive invocations of @code{make}
+(@pxref{Recursion, ,Recursive Use of @code{make}}).
+
+@item -d
+@cindex @code{-d}
+@c Extra blank line here makes the table look better.
+
+Print debugging information in addition to normal processing.  The
+debugging information says which files are being considered for
+remaking, which file-times are being compared and with what results,
+which files actually need to be remade, which implicit rules are
+considered and which are applied---everything interesting about how
+@code{make} decides what to do.  The @code{-d} option is equivalent to
+@samp{--debug=a} (see below).
+
+@item --debug[=@var{options}]
+@cindex @code{--debug}
+@c Extra blank line here makes the table look better.
+
+Print debugging information in addition to normal processing.  Various
+levels and types of output can be chosen.  With no arguments, print the
+``basic'' level of debugging.  Possible arguments are below; only the
+first character is considered, and values must be comma- or
+space-separated.
+
+@table @code
+@item a (@i{all})
+All types of debugging output are enabled.  This is equivalent to using
+@samp{-d}.
+
+@item b (@i{basic})
+Basic debugging prints each target that was found to be out-of-date, and
+whether the build was successful or not.
+
+@item v (@i{verbose})
+A level above @samp{basic}; includes messages about which makefiles were
+parsed, prerequisites that did not need to be rebuilt, etc.  This option
+also enables @samp{basic} messages.
+
+@item i (@i{implicit})
+Prints messages describing the implicit rule searches for each target.
+This option also enables @samp{basic} messages.
+
+@item j (@i{jobs})
+Prints messages giving details on the invocation of specific sub-commands.
+
+@item m (@i{makefile})
+By default, the above messages are not enabled while trying to remake
+the makefiles.  This option enables messages while rebuilding makefiles,
+too.  Note that the @samp{all} option does enable this option.  This
+option also enables @samp{basic} messages.
+
+@item n (@i{none})
+Disable all debugging currently enabled.  If additional debugging
+flags are encountered after this they will still take effect.
+@end table
+
+@item -e
+@cindex @code{-e}
+@itemx --environment-overrides
+@cindex @code{--environment-overrides}
+Give variables taken from the environment precedence
+over variables from makefiles.
+@xref{Environment, ,Variables from the Environment}.
+
+@item --eval=@var{string}
+@cindex @code{--eval}
+@c Extra blank line here makes the table look better.
+
+Evaluate @var{string} as makefile syntax.  This is a command-line
+version of the @code{eval} function (@pxref{Eval Function}).  The
+evaluation is performed after the default rules and variables have
+been defined, but before any makefiles are read.
+
+@item -f @var{file}
+@cindex @code{-f}
+@itemx --file=@var{file}
+@cindex @code{--file}
+@itemx --makefile=@var{file}
+@cindex @code{--makefile}
+Read the file named @var{file} as a makefile.
+@xref{Makefiles, ,Writing Makefiles}.
+
+@item -h
+@cindex @code{-h}
+@itemx --help
+@cindex @code{--help}
+@c Extra blank line here makes the table look better.
+
+Remind you of the options that @code{make} understands and then exit.
+
+@item -i
+@cindex @code{-i}
+@itemx --ignore-errors
+@cindex @code{--ignore-errors}
+Ignore all errors in recipes executed to remake files.
+@xref{Errors, ,Errors in Recipes}.
+
+@item -I @var{dir}
+@cindex @code{-I}
+@itemx --include-dir=@var{dir}
+@cindex @code{--include-dir}
+Specifies a directory @var{dir} to search for included makefiles.
+@xref{Include, ,Including Other Makefiles}.  If several @samp{-I}
+options are used to specify several directories, the directories are
+searched in the order specified.
+
+@item -j [@var{jobs}]
+@cindex @code{-j}
+@itemx --jobs[=@var{jobs}]
+@cindex @code{--jobs}
+Specifies the number of recipes (jobs) to run simultaneously.  With no
+argument, @code{make} runs as many recipes simultaneously as possible.
+If there is more than one @samp{-j} option, the last one is effective.
+@xref{Parallel, ,Parallel Execution}, for more information on how
+recipes are run.  Note that this option is ignored on MS-DOS.
+
+@item -k
+@cindex @code{-k}
+@itemx --keep-going
+@cindex @code{--keep-going}
+Continue as much as possible after an error.  While the target that
+failed, and those that depend on it, cannot be remade, the other
+prerequisites of these targets can be processed all the same.
+@xref{Testing, ,Testing the Compilation of a Program}.
+
+@item -l [@var{load}]
+@cindex @code{-l}
+@itemx --load-average[=@var{load}]
+@cindex @code{--load-average}
+@itemx --max-load[=@var{load}]
+@cindex @code{--max-load}
+Specifies that no new recipes should be started if there are other
+recipes running and the load average is at least @var{load} (a
+floating-point number).  With no argument, removes a previous load
+limit.  @xref{Parallel, ,Parallel Execution}.
+
+@item -L
+@cindex @code{-L}
+@itemx --check-symlink-times
+@cindex @code{--check-symlink-times}
+On systems that support symbolic links, this option causes @code{make}
+to consider the timestamps on any symbolic links in addition to the
+timestamp on the file referenced by those links.  When this option is
+provided, the most recent timestamp among the file and the symbolic
+links is taken as the modification time for this target file.
+
+@item -n
+@cindex @code{-n}
+@itemx --just-print
+@cindex @code{--just-print}
+@itemx --dry-run
+@cindex @code{--dry-run}
+@itemx --recon
+@cindex @code{--recon}
+@c Extra blank line here makes the table look better.
+
+Print the recipe that would be executed, but do not execute it (except
+in certain circumstances).
+@xref{Instead of Execution, ,Instead of Executing Recipes}.
+
+@item -o @var{file}
+@cindex @code{-o}
+@itemx --old-file=@var{file}
+@cindex @code{--old-file}
+@itemx --assume-old=@var{file}
+@cindex @code{--assume-old}
+Do not remake the file @var{file} even if it is older than its
+prerequisites, and do not remake anything on account of changes in
+@var{file}.  Essentially the file is treated as very old and its rules
+are ignored.  @xref{Avoiding Compilation, ,Avoiding Recompilation of
+Some Files}.@refill
+
+@item -O[@var{type}]
+@cindex @code{-O}
+@itemx --output-sync[=@var{type}]
+@cindex @code{--output-sync}
+@cindex output during parallel execution
+@cindex parallel execution, output during
+Ensure that the complete output from each recipe is printed in one
+uninterrupted sequence.  This option is only useful when using the
+@code{--jobs} option to run multiple recipes simultaneously
+(@pxref{Parallel, ,Parallel Execution})  Without this option output
+will be displayed as it is generated by the recipes.@refill
+
+With no type or the type @samp{target}, output from the entire recipe
+of each target is grouped together.  With the type @samp{line}, output
+from each line in the recipe is grouped together.  With the type
+@samp{recurse}, the output from an entire recursive make is grouped
+together.  With the type @samp{none}, no output synchronization is
+performed.  @xref{Parallel Output, ,Output During Parallel Execution}.
+
+@item -p
+@cindex @code{-p}
+@itemx --print-data-base
+@cindex @code{--print-data-base}
+@cindex data base of @code{make} rules
+@cindex predefined rules and variables, printing
+Print the data base (rules and variable values) that results from
+reading the makefiles; then execute as usual or as otherwise
+specified.  This also prints the version information given by the
+@samp{-v} switch (see below).  To print the data base without trying
+to remake any files, use @w{@samp{make -qp}}.  To print the data base
+of predefined rules and variables, use @w{@samp{make -p -f /dev/null}}.
+The data base output contains file name and line number information for
+recipe and variable definitions, so it can be a useful debugging tool
+in complex environments.
+
+@item -q
+@cindex @code{-q}
+@itemx --question
+@cindex @code{--question}
+``Question mode''.  Do not run any recipes, or print anything; just
+return an exit status that is zero if the specified targets are already
+up to date, one if any remaking is required, or two if an error is
+encountered.  @xref{Instead of Execution, ,Instead of Executing
+Recipes}.@refill
+
+@item -r
+@cindex @code{-r}
+@itemx --no-builtin-rules
+@cindex @code{--no-builtin-rules}
+Eliminate use of the built-in implicit rules (@pxref{Implicit Rules,
+,Using Implicit Rules}).  You can still define your own by writing
+pattern rules (@pxref{Pattern Rules, ,Defining and Redefining Pattern
+Rules}).  The @samp{-r} option also clears out the default list of
+suffixes for suffix rules (@pxref{Suffix Rules, ,Old-Fashioned Suffix
+Rules}).  But you can still define your own suffixes with a rule for
+@code{.SUFFIXES}, and then define your own suffix rules.  Note that only
+@emph{rules} are affected by the @code{-r} option; default variables
+remain in effect (@pxref{Implicit Variables, ,Variables Used by Implicit
+Rules}); see the @samp{-R} option below.
+
+@item -R
+@cindex @code{-R}
+@itemx --no-builtin-variables
+@cindex @code{--no-builtin-variables}
+Eliminate use of the built-in rule-specific variables (@pxref{Implicit
+Variables, ,Variables Used by Implicit Rules}).  You can still define
+your own, of course.  The @samp{-R} option also automatically enables
+the @samp{-r} option (see above), since it doesn't make sense to have
+implicit rules without any definitions for the variables that they use.
+
+@item -s
+@cindex @code{-s}
+@itemx --silent
+@cindex @code{--silent}
+@itemx --quiet
+@cindex @code{--quiet}
+@c Extra blank line here makes the table look better.
+
+Silent operation; do not print the recipes as they are executed.
+@xref{Echoing, ,Recipe Echoing}.
+
+@item -S
+@cindex @code{-S}
+@itemx --no-keep-going
+@cindex @code{--no-keep-going}
+@itemx --stop
+@cindex @code{--stop}
+@c Extra blank line here makes the table look better.
+
+Cancel the effect of the @samp{-k} option.  This is never necessary
+except in a recursive @code{make} where @samp{-k} might be inherited
+from the top-level @code{make} via @code{MAKEFLAGS}
+(@pxref{Recursion, ,Recursive Use of @code{make}})
+or if you set @samp{-k} in @code{MAKEFLAGS} in your environment.@refill
+
+@item -t
+@cindex @code{-t}
+@itemx --touch
+@cindex @code{--touch}
+@c Extra blank line here makes the table look better.
+
+Touch files (mark them up to date without really changing them)
+instead of running their recipes.  This is used to pretend that the
+recipes were done, in order to fool future invocations of
+@code{make}.  @xref{Instead of Execution, ,Instead of Executing Recipes}.
+
+@item --trace
+@cindex @code{--trace}
+Show tracing information for @code{make} execution.  Prints the entire
+recipe to be executed, even for recipes that are normally silent (due
+to @code{.SILENT} or @samp{@@}).  Also prints the makefile name and
+line number where the recipe was defined, and information on why the
+target is being rebuilt.
+
+@item -v
+@cindex @code{-v}
+@itemx --version
+@cindex @code{--version}
+Print the version of the @code{make} program plus a copyright, a list
+of authors, and a notice that there is no warranty; then exit.
+
+@item -w
+@cindex @code{-w}
+@itemx --print-directory
+@cindex @code{--print-directory}
+Print a message containing the working directory both before and after
+executing the makefile.  This may be useful for tracking down errors
+from complicated nests of recursive @code{make} commands.
+@xref{Recursion, ,Recursive Use of @code{make}}.  (In practice, you
+rarely need to specify this option since @samp{make} does it for you;
+see @ref{-w Option, ,The @samp{--print-directory} Option}.)
+
+@item --no-print-directory
+@cindex @code{--no-print-directory}
+Disable printing of the working directory under @code{-w}.
+This option is useful when @code{-w} is turned on automatically,
+but you do not want to see the extra messages.
+@xref{-w Option, ,The @samp{--print-directory} Option}.
+
+@item -W @var{file}
+@cindex @code{-W}
+@itemx --what-if=@var{file}
+@cindex @code{--what-if}
+@itemx --new-file=@var{file}
+@cindex @code{--new-file}
+@itemx --assume-new=@var{file}
+@cindex @code{--assume-new}
+Pretend that the target @var{file} has just been modified.  When used
+with the @samp{-n} flag, this shows you what would happen if you were
+to modify that file.  Without @samp{-n}, it is almost the same as
+running a @code{touch} command on the given file before running
+@code{make}, except that the modification time is changed only in the
+imagination of @code{make}.
+@xref{Instead of Execution, ,Instead of Executing Recipes}.
+
+@item --warn-undefined-variables
+@cindex @code{--warn-undefined-variables}
+@cindex variables, warning for undefined
+@cindex undefined variables, warning message
+Issue a warning message whenever @code{make} sees a reference to an
+undefined variable.  This can be helpful when you are trying to debug
+makefiles which use variables in complex ways.
+@end table
+
+@node Implicit Rules, Archives, Running, Top
+@chapter Using Implicit Rules
+@cindex implicit rule
+@cindex rule, implicit
+
+Certain standard ways of remaking target files are used very often.  For
+example, one customary way to make an object file is from a C source file
+using the C compiler, @code{cc}.
+
+@dfn{Implicit rules} tell @code{make} how to use customary techniques so
+that you do not have to specify them in detail when you want to use
+them.  For example, there is an implicit rule for C compilation.  File
+names determine which implicit rules are run.  For example, C
+compilation typically takes a @file{.c} file and makes a @file{.o} file.
+So @code{make} applies the implicit rule for C compilation when it sees
+this combination of file name endings.@refill
+
+A chain of implicit rules can apply in sequence; for example, @code{make}
+will remake a @file{.o} file from a @file{.y} file by way of a @file{.c} file.
+@iftex
+@xref{Chained Rules, ,Chains of Implicit Rules}.
+@end iftex
+
+The built-in implicit rules use several variables in their recipes so
+that, by changing the values of the variables, you can change the way the
+implicit rule works.  For example, the variable @code{CFLAGS} controls the
+flags given to the C compiler by the implicit rule for C compilation.
+@iftex
+@xref{Implicit Variables, ,Variables Used by Implicit Rules}.
+@end iftex
+
+You can define your own implicit rules by writing @dfn{pattern rules}.
+@iftex
+@xref{Pattern Rules, ,Defining and Redefining Pattern Rules}.
+@end iftex
+
+@dfn{Suffix rules} are a more limited way to define implicit rules.
+Pattern rules are more general and clearer, but suffix rules are
+retained for compatibility.
+@iftex
+@xref{Suffix Rules, ,Old-Fashioned Suffix Rules}.
+@end iftex
+
+@menu
+* Using Implicit::              How to use an existing implicit rule
+                                  to get the recipes for updating a file.
+* Catalogue of Rules::          A list of built-in rules.
+* Implicit Variables::          How to change what predefined rules do.
+* Chained Rules::               How to use a chain of implicit rules.
+* Pattern Rules::               How to define new implicit rules.
+* Last Resort::                 How to define a recipe for rules which
+                                  cannot find any.
+* Suffix Rules::                The old-fashioned style of implicit rule.
+* Implicit Rule Search::        The precise algorithm for applying
+                                  implicit rules.
+@end menu
+
+@node Using Implicit, Catalogue of Rules, Implicit Rules, Implicit Rules
+@section Using Implicit Rules
+@cindex implicit rule, how to use
+@cindex rule, implicit, how to use
+
+To allow @code{make} to find a customary method for updating a target
+file, all you have to do is refrain from specifying recipes yourself.
+Either write a rule with no recipe, or don't write a rule at all.
+Then @code{make} will figure out which implicit rule to use based on
+which kind of source file exists or can be made.
+
+For example, suppose the makefile looks like this:
+
+@example
+foo : foo.o bar.o
+        cc -o foo foo.o bar.o $(CFLAGS) $(LDFLAGS)
+@end example
+
+@noindent
+Because you mention @file{foo.o} but do not give a rule for it, @code{make}
+will automatically look for an implicit rule that tells how to update it.
+This happens whether or not the file @file{foo.o} currently exists.
+
+If an implicit rule is found, it can supply both a recipe and one or
+more prerequisites (the source files).  You would want to write a rule
+for @file{foo.o} with no recipe if you need to specify additional
+prerequisites, such as header files, that the implicit rule cannot
+supply.
+
+Each implicit rule has a target pattern and prerequisite patterns.  There may
+be many implicit rules with the same target pattern.  For example, numerous
+rules make @samp{.o} files: one, from a @samp{.c} file with the C compiler;
+another, from a @samp{.p} file with the Pascal compiler; and so on.  The rule
+that actually applies is the one whose prerequisites exist or can be made.
+So, if you have a file @file{foo.c}, @code{make} will run the C compiler;
+otherwise, if you have a file @file{foo.p}, @code{make} will run the Pascal
+compiler; and so on.
+
+Of course, when you write the makefile, you know which implicit rule you
+want @code{make} to use, and you know it will choose that one because you
+know which possible prerequisite files are supposed to exist.
+@xref{Catalogue of Rules, ,Catalogue of Built-In Rules},
+for a catalogue of all the predefined implicit rules.
+
+Above, we said an implicit rule applies if the required prerequisites ``exist
+or can be made''.  A file ``can be made'' if it is mentioned explicitly in
+the makefile as a target or a prerequisite, or if an implicit rule can be
+recursively found for how to make it.  When an implicit prerequisite is the
+result of another implicit rule, we say that @dfn{chaining} is occurring.
+@xref{Chained Rules, ,Chains of Implicit Rules}.
+
+In general, @code{make} searches for an implicit rule for each target, and
+for each double-colon rule, that has no recipe.  A file that is mentioned
+only as a prerequisite is considered a target whose rule specifies nothing,
+so implicit rule search happens for it.  @xref{Implicit Rule Search, ,Implicit Rule Search Algorithm}, for the
+details of how the search is done.
+
+Note that explicit prerequisites do not influence implicit rule search.
+For example, consider this explicit rule:
+
+@example
+foo.o: foo.p
+@end example
+
+@noindent
+The prerequisite on @file{foo.p} does not necessarily mean that
+@code{make} will remake @file{foo.o} according to the implicit rule to
+make an object file, a @file{.o} file, from a Pascal source file, a
+@file{.p} file.  For example, if @file{foo.c} also exists, the implicit
+rule to make an object file from a C source file is used instead,
+because it appears before the Pascal rule in the list of predefined
+implicit rules (@pxref{Catalogue of Rules, , Catalogue of Built-In
+Rules}).
+
+If you do not want an implicit rule to be used for a target that has no
+recipe, you can give that target an empty recipe by writing a semicolon
+(@pxref{Empty Recipes, ,Defining Empty Recipes}).
+
+@node Catalogue of Rules, Implicit Variables, Using Implicit, Implicit Rules
+@section Catalogue of Built-In Rules
+@cindex implicit rule, predefined
+@cindex rule, implicit, predefined
+
+Here is a catalogue of predefined implicit rules which are always
+available unless the makefile explicitly overrides or cancels them.
+@xref{Canceling Rules, ,Canceling Implicit Rules}, for information on
+canceling or overriding an implicit rule.  The @samp{-r} or
+@samp{--no-builtin-rules} option cancels all predefined rules.
+
+This manual only documents the default rules available on POSIX-based
+operating systems.  Other operating systems, such as VMS, Windows,
+OS/2, etc. may have different sets of default rules.  To see the full
+list of default rules and variables available in your version of GNU
+@code{make}, run @samp{make -p} in a directory with no makefile.
+
+Not all of these rules will always be defined, even when the @samp{-r}
+option is not given.  Many of the predefined implicit rules are
+implemented in @code{make} as suffix rules, so which ones will be
+defined depends on the @dfn{suffix list} (the list of prerequisites of
+the special target @code{.SUFFIXES}).  The default suffix list is:
+@code{.out}, @code{.a}, @code{.ln}, @code{.o}, @code{.c}, @code{.cc},
+@code{.C}, @code{.cpp}, @code{.p}, @code{.f}, @code{.F}, @code{.m},
+@code{.r}, @code{.y}, @code{.l}, @code{.ym}, @code{.lm}, @code{.s},
+@code{.S}, @code{.mod}, @code{.sym}, @code{.def}, @code{.h},
+@code{.info}, @code{.dvi}, @code{.tex}, @code{.texinfo}, @code{.texi},
+@code{.txinfo}, @code{.w}, @code{.ch} @code{.web}, @code{.sh},
+@code{.elc}, @code{.el}.  All of the implicit rules described below
+whose prerequisites have one of these suffixes are actually suffix
+rules.  If you modify the suffix list, the only predefined suffix
+rules in effect will be those named by one or two of the suffixes that
+are on the list you specify; rules whose suffixes fail to be on the
+list are disabled.  @xref{Suffix Rules, ,Old-Fashioned Suffix Rules},
+for full details on suffix rules.
+
+@table @asis
+@item Compiling C programs
+@cindex C, rule to compile
+@pindex cc
+@pindex gcc
+@pindex .o
+@pindex .c
+@file{@var{n}.o} is made automatically from @file{@var{n}.c} with
+a recipe of the form @samp{$(CC) $(CPPFLAGS) $(CFLAGS) -c}.@refill
+
+@item Compiling C++ programs
+@cindex C++, rule to compile
+@pindex g++
+@pindex .cc
+@pindex .cpp
+@pindex .C
+@file{@var{n}.o} is made automatically from @file{@var{n}.cc},
+@file{@var{n}.cpp}, or @file{@var{n}.C} with a recipe of the form
+@samp{$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c}.  We encourage you to use the
+suffix @samp{.cc} for C++ source files instead of @samp{.C}.@refill
+
+@item Compiling Pascal programs
+@cindex Pascal, rule to compile
+@pindex pc
+@pindex .p
+@file{@var{n}.o} is made automatically from @file{@var{n}.p}
+with the recipe @samp{$(PC) $(PFLAGS) -c}.@refill
+
+@item Compiling Fortran and Ratfor programs
+@cindex Fortran, rule to compile
+@cindex Ratfor, rule to compile
+@pindex f77
+@pindex .f
+@pindex .r
+@pindex .F
+@file{@var{n}.o} is made automatically from @file{@var{n}.r},
+@file{@var{n}.F} or @file{@var{n}.f} by running the
+Fortran compiler.  The precise recipe used is as follows:@refill
+
+@table @samp
+@item .f
+@samp{$(FC) $(FFLAGS) -c}.
+@item .F
+@samp{$(FC) $(FFLAGS) $(CPPFLAGS) -c}.
+@item .r
+@samp{$(FC) $(FFLAGS) $(RFLAGS) -c}.
+@end table
+
+@item Preprocessing Fortran and Ratfor programs
+@file{@var{n}.f} is made automatically from @file{@var{n}.r} or
+@file{@var{n}.F}.  This rule runs just the preprocessor to convert a
+Ratfor or preprocessable Fortran program into a strict Fortran
+program.  The precise recipe used is as follows:@refill
+
+@table @samp
+@item .F
+@samp{$(FC) $(CPPFLAGS) $(FFLAGS) -F}.
+@item .r
+@samp{$(FC) $(FFLAGS) $(RFLAGS) -F}.
+@end table
+
+@item Compiling Modula-2 programs
+@cindex Modula-2, rule to compile
+@pindex m2c
+@pindex .sym
+@pindex .def
+@pindex .mod
+@file{@var{n}.sym} is made from @file{@var{n}.def} with a recipe
+of the form @samp{$(M2C) $(M2FLAGS) $(DEFFLAGS)}.  @file{@var{n}.o}
+is made from @file{@var{n}.mod}; the form is:
+@w{@samp{$(M2C) $(M2FLAGS) $(MODFLAGS)}}.@refill
+
+@need 1200
+@item Assembling and preprocessing assembler programs
+@cindex assembly, rule to compile
+@pindex as
+@pindex .s
+@file{@var{n}.o} is made automatically from @file{@var{n}.s} by
+running the assembler, @code{as}.  The precise recipe is
+@samp{$(AS) $(ASFLAGS)}.@refill
+
+@pindex .S
+@file{@var{n}.s} is made automatically from @file{@var{n}.S} by
+running the C preprocessor, @code{cpp}.  The precise recipe is
+@w{@samp{$(CPP) $(CPPFLAGS)}}.
+
+@item Linking a single object file
+@cindex linking, predefined rule for
+@pindex ld
+@pindex .o
+@file{@var{n}} is made automatically from @file{@var{n}.o} by running
+the linker (usually called @code{ld}) via the C compiler.  The precise
+recipe used is @w{@samp{$(CC) $(LDFLAGS) @var{n}.o $(LOADLIBES) $(LDLIBS)}}.
+
+This rule does the right thing for a simple program with only one
+source file.  It will also do the right thing if there are multiple
+object files (presumably coming from various other source files), one
+of which has a name matching that of the executable file.  Thus,
+
+@example
+x: y.o z.o
+@end example
+
+@noindent
+when @file{x.c}, @file{y.c} and @file{z.c} all exist will execute:
+
+@example
+@group
+cc -c x.c -o x.o
+cc -c y.c -o y.o
+cc -c z.c -o z.o
+cc x.o y.o z.o -o x
+rm -f x.o
+rm -f y.o
+rm -f z.o
+@end group
+@end example
+
+@noindent
+In more complicated cases, such as when there is no object file whose
+name derives from the executable file name, you must write an explicit
+recipe for linking.
+
+Each kind of file automatically made into @samp{.o} object files will
+be automatically linked by using the compiler (@samp{$(CC)},
+@samp{$(FC)} or @samp{$(PC)}; the C compiler @samp{$(CC)} is used to
+assemble @samp{.s} files) without the @samp{-c} option.  This could be
+done by using the @samp{.o} object files as intermediates, but it is
+faster to do the compiling and linking in one step, so that's how it's
+done.@refill
+
+@item Yacc for C programs
+@pindex yacc
+@cindex Yacc, rule to run
+@pindex .y
+@file{@var{n}.c} is made automatically from @file{@var{n}.y} by
+running Yacc with the recipe @samp{$(YACC) $(YFLAGS)}.
+
+@item Lex for C programs
+@pindex lex
+@cindex Lex, rule to run
+@pindex .l
+@file{@var{n}.c} is made automatically from @file{@var{n}.l} by
+running Lex.  The actual recipe is @samp{$(LEX) $(LFLAGS)}.
+
+@item Lex for Ratfor programs
+@file{@var{n}.r} is made automatically from @file{@var{n}.l} by
+running Lex.  The actual recipe is @samp{$(LEX) $(LFLAGS)}.
+
+The convention of using the same suffix @samp{.l} for all Lex files
+regardless of whether they produce C code or Ratfor code makes it
+impossible for @code{make} to determine automatically which of the two
+languages you are using in any particular case.  If @code{make} is
+called upon to remake an object file from a @samp{.l} file, it must
+guess which compiler to use.  It will guess the C compiler, because
+that is more common.  If you are using Ratfor, make sure @code{make}
+knows this by mentioning @file{@var{n}.r} in the makefile.  Or, if you
+are using Ratfor exclusively, with no C files, remove @samp{.c} from
+the list of implicit rule suffixes with:@refill
+
+@example
+@group
+.SUFFIXES:
+.SUFFIXES: .o .r .f .l @dots{}
+@end group
+@end example
+
+@item Making Lint Libraries from C, Yacc, or Lex programs
+@pindex lint
+@cindex @code{lint}, rule to run
+@pindex .ln
+@file{@var{n}.ln} is made from @file{@var{n}.c} by running @code{lint}.
+The precise recipe is @w{@samp{$(LINT) $(LINTFLAGS) $(CPPFLAGS) -i}}.
+The same recipe is used on the C code produced from
+@file{@var{n}.y} or @file{@var{n}.l}.@refill
+
+@item @TeX{} and Web
+@cindex @TeX{}, rule to run
+@cindex Web, rule to run
+@pindex tex
+@pindex cweave
+@pindex weave
+@pindex tangle
+@pindex ctangle
+@pindex .dvi
+@pindex .tex
+@pindex .web
+@pindex .w
+@pindex .ch
+@file{@var{n}.dvi} is made from @file{@var{n}.tex} with the recipe
+@samp{$(TEX)}.  @file{@var{n}.tex} is made from @file{@var{n}.web} with
+@samp{$(WEAVE)}, or from @file{@var{n}.w} (and from @file{@var{n}.ch} if
+it exists or can be made) with @samp{$(CWEAVE)}.  @file{@var{n}.p} is
+made from @file{@var{n}.web} with @samp{$(TANGLE)} and @file{@var{n}.c}
+is made from @file{@var{n}.w} (and from @file{@var{n}.ch} if it exists
+or can be made) with @samp{$(CTANGLE)}.@refill
+
+@item Texinfo and Info
+@cindex Texinfo, rule to format
+@cindex Info, rule to format
+@pindex texi2dvi
+@pindex makeinfo
+@pindex .texinfo
+@pindex .info
+@pindex .texi
+@pindex .txinfo
+@file{@var{n}.dvi} is made from @file{@var{n}.texinfo},
+@file{@var{n}.texi}, or @file{@var{n}.txinfo}, with the recipe
+@w{@samp{$(TEXI2DVI) $(TEXI2DVI_FLAGS)}}.  @file{@var{n}.info} is made from
+@file{@var{n}.texinfo}, @file{@var{n}.texi}, or @file{@var{n}.txinfo}, with
+the recipe @w{@samp{$(MAKEINFO) $(MAKEINFO_FLAGS)}}.
+
+@item RCS
+@cindex RCS, rule to extract from
+@pindex co
+@pindex ,v @r{(RCS file extension)}
+Any file @file{@var{n}} is extracted if necessary from an RCS file
+named either @file{@var{n},v} or @file{RCS/@var{n},v}.  The precise
+recipe used is @w{@samp{$(CO) $(COFLAGS)}}.  @file{@var{n}} will not be
+extracted from RCS if it already exists, even if the RCS file is
+newer.  The rules for RCS are terminal
+(@pxref{Match-Anything Rules, ,Match-Anything Pattern Rules}),
+so RCS files cannot be generated from another source; they must
+actually exist.@refill
+
+@item SCCS
+@cindex SCCS, rule to extract from
+@pindex get
+@pindex s. @r{(SCCS file prefix)}
+Any file @file{@var{n}} is extracted if necessary from an SCCS file
+named either @file{s.@var{n}} or @file{SCCS/s.@var{n}}.  The precise
+recipe used is @w{@samp{$(GET) $(GFLAGS)}}.  The rules for SCCS are
+terminal (@pxref{Match-Anything Rules, ,Match-Anything Pattern Rules}),
+so SCCS files cannot be generated from another source; they must
+actually exist.@refill
+
+@pindex .sh
+For the benefit of SCCS, a file @file{@var{n}} is copied from
+@file{@var{n}.sh} and made executable (by everyone).  This is for
+shell scripts that are checked into SCCS.  Since RCS preserves the
+execution permission of a file, you do not need to use this feature
+with RCS.@refill
+
+We recommend that you avoid using of SCCS.  RCS is widely held to be
+superior, and is also free.  By choosing free software in place of
+comparable (or inferior) proprietary software, you support the free
+software movement.
+@end table
+
+Usually, you want to change only the variables listed in the table
+above, which are documented in the following section.
+
+However, the recipes in built-in implicit rules actually use
+variables such as @code{COMPILE.c}, @code{LINK.p}, and
+@code{PREPROCESS.S}, whose values contain the recipes listed above.
+
+@code{make} follows the convention that the rule to compile a
+@file{.@var{x}} source file uses the variable @code{COMPILE.@var{x}}.
+Similarly, the rule to produce an executable from a @file{.@var{x}}
+file uses @code{LINK.@var{x}}; and the rule to preprocess a
+@file{.@var{x}} file uses @code{PREPROCESS.@var{x}}.
+
+@vindex OUTPUT_OPTION
+Every rule that produces an object file uses the variable
+@code{OUTPUT_OPTION}.  @code{make} defines this variable either to
+contain @samp{-o $@@}, or to be empty, depending on a compile-time
+option.  You need the @samp{-o} option to ensure that the output goes
+into the right file when the source file is in a different directory,
+as when using @code{VPATH} (@pxref{Directory Search}).  However,
+compilers on some systems do not accept a @samp{-o} switch for object
+files.  If you use such a system, and use @code{VPATH}, some
+compilations will put their output in the wrong place.
+A possible workaround for this problem is to give @code{OUTPUT_OPTION}
+the value @w{@samp{; mv $*.o $@@}}.
+
+@node Implicit Variables, Chained Rules, Catalogue of Rules, Implicit Rules
+@section Variables Used by Implicit Rules
+@cindex flags for compilers
+
+The recipes in built-in implicit rules make liberal use of certain
+predefined variables.  You can alter the values of these variables in
+the makefile, with arguments to @code{make}, or in the environment to
+alter how the implicit rules work without redefining the rules
+themselves.  You can cancel all variables used by implicit rules with
+the @samp{-R} or @samp{--no-builtin-variables} option.
+
+For example, the recipe used to compile a C source file actually says
+@samp{$(CC) -c $(CFLAGS) $(CPPFLAGS)}.  The default values of the variables
+used are @samp{cc} and nothing, resulting in the command @samp{cc -c}.  By
+redefining @samp{CC} to @samp{ncc}, you could cause @samp{ncc} to be
+used for all C compilations performed by the implicit rule.  By redefining
+@samp{CFLAGS} to be @samp{-g}, you could pass the @samp{-g} option to
+each compilation.  @emph{All} implicit rules that do C compilation use
+@samp{$(CC)} to get the program name for the compiler and @emph{all}
+include @samp{$(CFLAGS)} among the arguments given to the compiler.@refill
+
+The variables used in implicit rules fall into two classes: those that are
+names of programs (like @code{CC}) and those that contain arguments for the
+programs (like @code{CFLAGS}).  (The ``name of a program'' may also contain
+some command arguments, but it must start with an actual executable program
+name.)  If a variable value contains more than one argument, separate them
+with spaces.
+
+The following tables describe of some of the more commonly-used predefined
+variables.  This list is not exhaustive, and the default values shown here may
+not be what @code{make} selects for your environment.  To see the
+complete list of predefined variables for your instance of GNU @code{make} you
+can run @samp{make -p} in a directory with no makefiles.
+
+Here is a table of some of the more common variables used as names of
+programs in built-in rules:
+
+@table @code
+@item AR
+@vindex AR
+Archive-maintaining program; default @samp{ar}.
+@pindex ar
+
+@item AS
+@vindex AS
+Program for compiling assembly files; default @samp{as}.
+@pindex as
+
+@item CC
+@vindex CC
+Program for compiling C programs; default @samp{cc}.
+@pindex cc
+
+@item CXX
+@vindex CXX
+Program for compiling C++ programs; default @samp{g++}.
+@pindex g++
+
+@item CPP
+@vindex CPP
+Program for running the C preprocessor, with results to standard output;
+default @samp{$(CC) -E}.
+
+@item FC
+@vindex FC
+Program for compiling or preprocessing Fortran and Ratfor programs;
+default @samp{f77}.
+@pindex f77
+
+@item M2C
+@vindex M2C
+Program to use to compile Modula-2 source code; default @samp{m2c}.
+@pindex m2c
+
+@item PC
+@vindex PC
+Program for compiling Pascal programs; default @samp{pc}.
+@pindex pc
+
+@item CO
+@vindex CO
+Program for extracting a file from RCS; default @samp{co}.
+@pindex co
+
+@item GET
+@vindex GET
+Program for extracting a file from SCCS; default @samp{get}.
+@pindex get
+
+@item LEX
+@vindex LEX
+Program to use to turn Lex grammars into source code; default @samp{lex}.
+@pindex lex
+
+@item YACC
+@vindex YACC
+Program to use to turn Yacc grammars into source code; default @samp{yacc}.
+@pindex yacc
+
+@item LINT
+@vindex LINT
+Program to use to run lint on source code; default @samp{lint}.
+@pindex lint
+
+@item MAKEINFO
+@vindex MAKEINFO
+Program to convert a Texinfo source file into an Info file; default
+@samp{makeinfo}.
+@pindex makeinfo
+
+@item TEX
+@vindex TEX
+Program to make @TeX{} @sc{dvi} files from @TeX{} source;
+default @samp{tex}.
+@pindex tex
+
+@item TEXI2DVI
+@vindex TEXI2DVI
+Program to make @TeX{} @sc{dvi} files from Texinfo source;
+default @samp{texi2dvi}.
+@pindex texi2dvi
+
+@item WEAVE
+@vindex WEAVE
+Program to translate Web into @TeX{}; default @samp{weave}.
+@pindex weave
+
+@item CWEAVE
+@vindex CWEAVE
+Program to translate C Web into @TeX{}; default @samp{cweave}.
+@pindex cweave
+
+@item TANGLE
+@vindex TANGLE
+Program to translate Web into Pascal; default @samp{tangle}.
+@pindex tangle
+
+@item CTANGLE
+@vindex CTANGLE
+Program to translate C Web into C; default @samp{ctangle}.
+@pindex ctangle
+
+@item RM
+@vindex RM
+Command to remove a file; default @samp{rm -f}.
+@pindex rm
+@end table
+
+Here is a table of variables whose values are additional arguments for the
+programs above.  The default values for all of these is the empty
+string, unless otherwise noted.
+
+@table @code
+@item ARFLAGS
+@vindex ARFLAGS
+Flags to give the archive-maintaining program; default @samp{rv}.
+
+@item ASFLAGS
+@vindex ASFLAGS
+Extra flags to give to the assembler (when explicitly
+invoked on a @samp{.s} or @samp{.S} file).
+
+@item CFLAGS
+@vindex CFLAGS
+Extra flags to give to the C compiler.
+
+@item CXXFLAGS
+@vindex CXXFLAGS
+Extra flags to give to the C++ compiler.
+
+@item COFLAGS
+@vindex COFLAGS
+Extra flags to give to the RCS @code{co} program.
+
+@item CPPFLAGS
+@vindex CPPFLAGS
+Extra flags to give to the C preprocessor and programs
+that use it (the C and Fortran compilers).
+
+@item FFLAGS
+@vindex FFLAGS
+Extra flags to give to the Fortran compiler.
+
+@item GFLAGS
+@vindex GFLAGS
+Extra flags to give to the SCCS @code{get} program.
+
+@item LDFLAGS
+@vindex LDFLAGS
+Extra flags to give to compilers when they are supposed to invoke the linker,
+@samp{ld}, such as @code{-L}.  Libraries (@code{-lfoo}) should be
+added to the @code{LDLIBS} variable instead.
+
+@item LDLIBS
+@vindex LDLIBS
+@vindex LOADLIBES
+Library flags or names given to compilers when they are supposed to
+invoke the linker, @samp{ld}.  @code{LOADLIBES} is a deprecated (but
+still supported) alternative to @code{LDLIBS}.  Non-library linker
+flags, such as @code{-L}, should go in the @code{LDFLAGS} variable.
+
+@item LFLAGS
+@vindex LFLAGS
+Extra flags to give to Lex.
+
+@item YFLAGS
+@vindex YFLAGS
+Extra flags to give to Yacc.
+
+@item PFLAGS
+@vindex PFLAGS
+Extra flags to give to the Pascal compiler.
+
+@item RFLAGS
+@vindex RFLAGS
+Extra flags to give to the Fortran compiler for Ratfor programs.
+
+@item LINTFLAGS
+@vindex LINTFLAGS
+Extra flags to give to lint.
+@end table
+
+@node Chained Rules, Pattern Rules, Implicit Variables, Implicit Rules
+@section Chains of Implicit Rules
+
+@cindex chains of rules
+@cindex rule, implicit, chains of
+Sometimes a file can be made by a sequence of implicit rules.  For example,
+a file @file{@var{n}.o} could be made from @file{@var{n}.y} by running
+first Yacc and then @code{cc}.  Such a sequence is called a @dfn{chain}.
+
+If the file @file{@var{n}.c} exists, or is mentioned in the makefile, no
+special searching is required: @code{make} finds that the object file can
+be made by C compilation from @file{@var{n}.c}; later on, when considering
+how to make @file{@var{n}.c}, the rule for running Yacc is
+used.  Ultimately both @file{@var{n}.c} and @file{@var{n}.o} are
+updated.@refill
+
+@cindex intermediate files
+@cindex files, intermediate
+However, even if @file{@var{n}.c} does not exist and is not mentioned,
+@code{make} knows how to envision it as the missing link between
+@file{@var{n}.o} and @file{@var{n}.y}!  In this case, @file{@var{n}.c} is
+called an @dfn{intermediate file}.  Once @code{make} has decided to use the
+intermediate file, it is entered in the data base as if it had been
+mentioned in the makefile, along with the implicit rule that says how to
+create it.@refill
+
+Intermediate files are remade using their rules just like all other
+files.  But intermediate files are treated differently in two ways.
+
+The first difference is what happens if the intermediate file does not
+exist.  If an ordinary file @var{b} does not exist, and @code{make}
+considers a target that depends on @var{b}, it invariably creates
+@var{b} and then updates the target from @var{b}.  But if @var{b} is an
+intermediate file, then @code{make} can leave well enough alone.  It
+won't bother updating @var{b}, or the ultimate target, unless some
+prerequisite of @var{b} is newer than that target or there is some other
+reason to update that target.
+
+The second difference is that if @code{make} @emph{does} create @var{b}
+in order to update something else, it deletes @var{b} later on after it
+is no longer needed.  Therefore, an intermediate file which did not
+exist before @code{make} also does not exist after @code{make}.
+@code{make} reports the deletion to you by printing a @samp{rm -f}
+command showing which file it is deleting.
+
+Ordinarily, a file cannot be intermediate if it is mentioned in the
+makefile as a target or prerequisite.  However, you can explicitly mark a
+file as intermediate by listing it as a prerequisite of the special target
+@code{.INTERMEDIATE}.  This takes effect even if the file is mentioned
+explicitly in some other way.
+
+@cindex intermediate files, preserving
+@cindex preserving intermediate files
+@cindex secondary files
+You can prevent automatic deletion of an intermediate file by marking it
+as a @dfn{secondary} file.  To do this, list it as a prerequisite of the
+special target @code{.SECONDARY}.  When a file is secondary, @code{make}
+will not create the file merely because it does not already exist, but
+@code{make} does not automatically delete the file.  Marking a file as
+secondary also marks it as intermediate.
+
+You can list the target pattern of an implicit rule (such as @samp{%.o})
+as a prerequisite of the special target @code{.PRECIOUS} to preserve
+intermediate files made by implicit rules whose target patterns match
+that file's name; see @ref{Interrupts}.@refill
+@cindex preserving with @code{.PRECIOUS}
+@cindex @code{.PRECIOUS} intermediate files
+
+A chain can involve more than two implicit rules.  For example, it is
+possible to make a file @file{foo} from @file{RCS/foo.y,v} by running RCS,
+Yacc and @code{cc}.  Then both @file{foo.y} and @file{foo.c} are
+intermediate files that are deleted at the end.@refill
+
+No single implicit rule can appear more than once in a chain.  This means
+that @code{make} will not even consider such a ridiculous thing as making
+@file{foo} from @file{foo.o.o} by running the linker twice.  This
+constraint has the added benefit of preventing any infinite loop in the
+search for an implicit rule chain.
+
+There are some special implicit rules to optimize certain cases that would
+otherwise be handled by rule chains.  For example, making @file{foo} from
+@file{foo.c} could be handled by compiling and linking with separate
+chained rules, using @file{foo.o} as an intermediate file.  But what
+actually happens is that a special rule for this case does the compilation
+and linking with a single @code{cc} command.  The optimized rule is used in
+preference to the step-by-step chain because it comes earlier in the
+ordering of rules.
+
+@node Pattern Rules, Last Resort, Chained Rules, Implicit Rules
+@section Defining and Redefining Pattern Rules
+
+You define an implicit rule by writing a @dfn{pattern rule}.  A pattern
+rule looks like an ordinary rule, except that its target contains the
+character @samp{%} (exactly one of them).  The target is considered a
+pattern for matching file names; the @samp{%} can match any nonempty
+substring, while other characters match only themselves.  The prerequisites
+likewise use @samp{%} to show how their names relate to the target name.
+
+Thus, a pattern rule @samp{%.o : %.c} says how to make any file
+@file{@var{stem}.o} from another file @file{@var{stem}.c}.@refill
+
+Note that expansion using @samp{%} in pattern rules occurs
+@strong{after} any variable or function expansions, which take place
+when the makefile is read.  @xref{Using Variables, , How to Use
+Variables}, and @ref{Functions, ,Functions for Transforming Text}.
+
+@menu
+* Pattern Intro::               An introduction to pattern rules.
+* Pattern Examples::            Examples of pattern rules.
+* Automatic Variables::         How to use automatic variables in the
+                                  recipe of implicit rules.
+* Pattern Match::               How patterns match.
+* Match-Anything Rules::        Precautions you should take prior to
+                                  defining rules that can match any
+                                  target file whatever.
+* Canceling Rules::             How to override or cancel built-in rules.
+@end menu
+
+@node Pattern Intro, Pattern Examples, Pattern Rules, Pattern Rules
+@subsection Introduction to Pattern Rules
+@cindex pattern rule
+@cindex rule, pattern
+
+A pattern rule contains the character @samp{%} (exactly one of them)
+in the target; otherwise, it looks exactly like an ordinary rule.  The
+target is a pattern for matching file names; the @samp{%} matches any
+nonempty substring, while other characters match only themselves.
+@cindex target pattern, implicit
+@cindex @code{%}, in pattern rules
+
+For example, @samp{%.c} as a pattern matches any file name that ends in
+@samp{.c}.  @samp{s.%.c} as a pattern matches any file name that starts
+with @samp{s.}, ends in @samp{.c} and is at least five characters long.
+(There must be at least one character to match the @samp{%}.)  The substring
+that the @samp{%} matches is called the @dfn{stem}.@refill
+
+@samp{%} in a prerequisite of a pattern rule stands for the same stem
+that was matched by the @samp{%} in the target.  In order for the
+pattern rule to apply, its target pattern must match the file name
+under consideration and all of its prerequisites (after pattern
+substitution) must name files that exist or can be made.  These files
+become prerequisites of the target.
+@cindex prerequisite pattern, implicit
+
+Thus, a rule of the form
+
+@example
+%.o : %.c ; @var{recipe}@dots{}
+@end example
+
+@noindent
+specifies how to make a file @file{@var{n}.o}, with another file
+@file{@var{n}.c} as its prerequisite, provided that @file{@var{n}.c}
+exists or can be made.
+
+There may also be prerequisites that do not use @samp{%}; such a prerequisite
+attaches to every file made by this pattern rule.  These unvarying
+prerequisites are useful occasionally.
+
+A pattern rule need not have any prerequisites that contain @samp{%}, or
+in fact any prerequisites at all.  Such a rule is effectively a general
+wildcard.  It provides a way to make any file that matches the target
+pattern.  @xref{Last Resort}.
+
+More than one pattern rule may match a target.  In this case
+@code{make} will choose the ``best fit'' rule.  @xref{Pattern Match,
+,How Patterns Match}.
+
+@c !!! The end of of this paragraph should be rewritten.  --bob
+Pattern rules may have more than one target.  Unlike normal rules,
+this does not act as many different rules with the same prerequisites
+and recipe.  If a pattern rule has multiple targets, @code{make} knows
+that the rule's recipe is responsible for making all of the targets.
+The recipe is executed only once to make all the targets.  When
+searching for a pattern rule to match a target, the target patterns of
+a rule other than the one that matches the target in need of a rule
+are incidental: @code{make} worries only about giving a recipe and
+prerequisites to the file presently in question.  However, when this
+file's recipe is run, the other targets are marked as having been
+updated themselves.
+@cindex multiple targets, in pattern rule
+@cindex target, multiple in pattern rule
+
+@node Pattern Examples, Automatic Variables, Pattern Intro, Pattern Rules
+@subsection Pattern Rule Examples
+
+Here are some examples of pattern rules actually predefined in
+@code{make}.  First, the rule that compiles @samp{.c} files into @samp{.o}
+files:@refill
+
+@example
+%.o : %.c
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@@
+@end example
+
+@noindent
+defines a rule that can make any file @file{@var{x}.o} from
+@file{@var{x}.c}.  The recipe uses the automatic variables @samp{$@@} and
+@samp{$<} to substitute the names of the target file and the source file
+in each case where the rule applies (@pxref{Automatic Variables}).@refill
+
+Here is a second built-in rule:
+
+@example
+% :: RCS/%,v
+        $(CO) $(COFLAGS) $<
+@end example
+
+@noindent
+defines a rule that can make any file @file{@var{x}} whatsoever from a
+corresponding file @file{@var{x},v} in the sub-directory @file{RCS}.  Since
+the target is @samp{%}, this rule will apply to any file whatever, provided
+the appropriate prerequisite file exists.  The double colon makes the rule
+@dfn{terminal}, which means that its prerequisite may not be an intermediate
+file (@pxref{Match-Anything Rules, ,Match-Anything Pattern Rules}).@refill
+
+@need 500
+This pattern rule has two targets:
+
+@example
+@group
+%.tab.c %.tab.h: %.y
+        bison -d $<
+@end group
+@end example
+
+@noindent
+@c The following paragraph is rewritten to avoid overfull hboxes
+This tells @code{make} that the recipe @samp{bison -d @var{x}.y} will
+make both @file{@var{x}.tab.c} and @file{@var{x}.tab.h}.  If the file
+@file{foo} depends on the files @file{parse.tab.o} and @file{scan.o}
+and the file @file{scan.o} depends on the file @file{parse.tab.h},
+when @file{parse.y} is changed, the recipe @samp{bison -d parse.y}
+will be executed only once, and the prerequisites of both
+@file{parse.tab.o} and @file{scan.o} will be satisfied.  (Presumably
+the file @file{parse.tab.o} will be recompiled from @file{parse.tab.c}
+and the file @file{scan.o} from @file{scan.c}, while @file{foo} is
+linked from @file{parse.tab.o}, @file{scan.o}, and its other
+prerequisites, and it will execute happily ever after.)@refill
+
+@node Automatic Variables, Pattern Match, Pattern Examples, Pattern Rules
+@subsection Automatic Variables
+@cindex automatic variables
+@cindex variables, automatic
+@cindex variables, and implicit rule
+
+Suppose you are writing a pattern rule to compile a @samp{.c} file into a
+@samp{.o} file: how do you write the @samp{cc} command so that it operates
+on the right source file name?  You cannot write the name in the recipe,
+because the name is different each time the implicit rule is applied.
+
+What you do is use a special feature of @code{make}, the @dfn{automatic
+variables}.  These variables have values computed afresh for each rule that
+is executed, based on the target and prerequisites of the rule.  In this
+example, you would use @samp{$@@} for the object file name and @samp{$<}
+for the source file name.
+
+@cindex automatic variables in prerequisites
+@cindex prerequisites, and automatic variables
+It's very important that you recognize the limited scope in which
+automatic variable values are available: they only have values within
+the recipe.  In particular, you cannot use them anywhere
+within the target list of a rule; they have no value there and will
+expand to the empty string.  Also, they cannot be accessed directly
+within the prerequisite list of a rule.  A common mistake is
+attempting to use @code{$@@} within the prerequisites list; this will
+not work.  However, there is a special feature of GNU @code{make},
+secondary expansion (@pxref{Secondary Expansion}), which will allow
+automatic variable values to be used in prerequisite lists.
+
+Here is a table of automatic variables:
+
+@table @code
+@vindex $@@
+@vindex @@ @r{(automatic variable)}
+@item $@@
+The file name of the target of the rule.  If the target is an archive
+member, then @samp{$@@} is the name of the archive file.  In a pattern
+rule that has multiple targets (@pxref{Pattern Intro, ,Introduction to
+Pattern Rules}), @samp{$@@} is the name of whichever target caused the
+rule's recipe to be run.
+
+@vindex $%
+@vindex % @r{(automatic variable)}
+@item $%
+The target member name, when the target is an archive member.
+@xref{Archives}.  For example, if the target is @file{foo.a(bar.o)} then
+@samp{$%} is @file{bar.o} and @samp{$@@} is @file{foo.a}.  @samp{$%} is
+empty when the target is not an archive member.
+
+@vindex $<
+@vindex < @r{(automatic variable)}
+@item $<
+The name of the first prerequisite.  If the target got its recipe from
+an implicit rule, this will be the first prerequisite added by the
+implicit rule (@pxref{Implicit Rules}).
+
+@vindex $?
+@vindex ? @r{(automatic variable)}
+@item $?
+The names of all the prerequisites that are newer than the target, with
+spaces between them.  For prerequisites which are archive members, only
+the named member is used (@pxref{Archives}).
+@cindex prerequisites, list of changed
+@cindex list of changed prerequisites
+
+@vindex $^
+@vindex ^ @r{(automatic variable)}
+@item $^
+The names of all the prerequisites, with spaces between them.  For
+prerequisites which are archive members, only the named member is used
+(@pxref{Archives}).  A target has only one prerequisite on each other file
+it depends on, no matter how many times each file is listed as a
+prerequisite.  So if you list a prerequisite more than once for a target,
+the value of @code{$^} contains just one copy of the name.  This list
+does @strong{not} contain any of the order-only prerequisites; for those
+see the @samp{$|} variable, below.
+@cindex prerequisites, list of all
+@cindex list of all prerequisites
+
+@vindex $+
+@vindex + @r{(automatic variable)}
+@item $+
+This is like @samp{$^}, but prerequisites listed more than once are
+duplicated in the order they were listed in the makefile.  This is
+primarily useful for use in linking commands where it is meaningful to
+repeat library file names in a particular order.
+
+@vindex $|
+@vindex | @r{(automatic variable)}
+@item $|
+The names of all the order-only prerequisites, with spaces between
+them.
+
+@vindex $*
+@vindex * @r{(automatic variable)}
+@item $*
+The stem with which an implicit rule matches (@pxref{Pattern Match, ,How
+Patterns Match}).  If the target is @file{dir/a.foo.b} and the target
+pattern is @file{a.%.b} then the stem is @file{dir/foo}.  The stem is
+useful for constructing names of related files.@refill
+@cindex stem, variable for
+
+In a static pattern rule, the stem is part of the file name that matched
+the @samp{%} in the target pattern.
+
+In an explicit rule, there is no stem; so @samp{$*} cannot be determined
+in that way.  Instead, if the target name ends with a recognized suffix
+(@pxref{Suffix Rules, ,Old-Fashioned Suffix Rules}), @samp{$*} is set to
+the target name minus the suffix.  For example, if the target name is
+@samp{foo.c}, then @samp{$*} is set to @samp{foo}, since @samp{.c} is a
+suffix.  GNU @code{make} does this bizarre thing only for compatibility
+with other implementations of @code{make}.  You should generally avoid
+using @samp{$*} except in implicit rules or static pattern rules.@refill
+
+If the target name in an explicit rule does not end with a recognized
+suffix, @samp{$*} is set to the empty string for that rule.
+@end table
+
+@samp{$?} is useful even in explicit rules when you wish to operate on only
+the prerequisites that have changed.  For example, suppose that an archive
+named @file{lib} is supposed to contain copies of several object files.
+This rule copies just the changed object files into the archive:
+
+@example
+@group
+lib: foo.o bar.o lose.o win.o
+        ar r lib $?
+@end group
+@end example
+
+Of the variables listed above, four have values that are single file
+names, and three have values that are lists of file names.  These seven
+have variants that get just the file's directory name or just the file
+name within the directory.  The variant variables' names are formed by
+appending @samp{D} or @samp{F}, respectively.  These variants are
+semi-obsolete in GNU @code{make} since the functions @code{dir} and
+@code{notdir} can be used to get a similar effect (@pxref{File Name
+Functions, , Functions for File Names}).  Note, however, that the
+@samp{D} variants all omit the trailing slash which always appears in
+the output of the @code{dir} function.  Here is a table of the variants:
+
+@table @samp
+@vindex $(@@D)
+@vindex @@D @r{(automatic variable)}
+@item $(@@D)
+The directory part of the file name of the target, with the trailing
+slash removed.  If the value of @samp{$@@} is @file{dir/foo.o} then
+@samp{$(@@D)} is @file{dir}.  This value is @file{.} if @samp{$@@} does
+not contain a slash.
+
+@vindex $(@@F)
+@vindex @@F @r{(automatic variable)}
+@item $(@@F)
+The file-within-directory part of the file name of the target.  If the
+value of @samp{$@@} is @file{dir/foo.o} then @samp{$(@@F)} is
+@file{foo.o}.  @samp{$(@@F)} is equivalent to @samp{$(notdir $@@)}.
+
+@vindex $(*D)
+@vindex *D @r{(automatic variable)}
+@item $(*D)
+@vindex $(*F)
+@vindex *F @r{(automatic variable)}
+@itemx $(*F)
+The directory part and the file-within-directory
+part of the stem; @file{dir} and @file{foo} in this example.
+
+@vindex $(%D)
+@vindex %D @r{(automatic variable)}
+@item $(%D)
+@vindex $(%F)
+@vindex %F @r{(automatic variable)}
+@itemx $(%F)
+The directory part and the file-within-directory part of the target
+archive member name.  This makes sense only for archive member targets
+of the form @file{@var{archive}(@var{member})} and is useful only when
+@var{member} may contain a directory name.  (@xref{Archive Members,
+,Archive Members as Targets}.)
+
+@vindex $(<D)
+@vindex <D @r{(automatic variable)}
+@item $(<D)
+@vindex $(<F)
+@vindex <F @r{(automatic variable)}
+@itemx $(<F)
+The directory part and the file-within-directory
+part of the first prerequisite.
+
+@vindex $(^D)
+@vindex ^D @r{(automatic variable)}
+@item $(^D)
+@vindex $(^F)
+@vindex ^F @r{(automatic variable)}
+@itemx $(^F)
+Lists of the directory parts and the file-within-directory
+parts of all prerequisites.
+
+@vindex $(+D)
+@vindex +D @r{(automatic variable)}
+@item $(+D)
+@vindex $(+F)
+@vindex +F @r{(automatic variable)}
+@itemx $(+F)
+Lists of the directory parts and the file-within-directory
+parts of all prerequisites, including multiple instances of duplicated
+prerequisites.
+
+@vindex $(?D)
+@vindex ?D @r{(automatic variable)}
+@item $(?D)
+@vindex $(?F)
+@vindex ?F @r{(automatic variable)}
+@itemx $(?F)
+Lists of the directory parts and the file-within-directory parts of
+all prerequisites that are newer than the target.
+@end table
+
+Note that we use a special stylistic convention when we talk about these
+automatic variables; we write ``the value of @samp{$<}'', rather than
+@w{``the variable @code{<}''} as we would write for ordinary variables
+such as @code{objects} and @code{CFLAGS}.  We think this convention
+looks more natural in this special case.  Please do not assume it has a
+deep significance; @samp{$<} refers to the variable named @code{<} just
+as @samp{$(CFLAGS)} refers to the variable named @code{CFLAGS}.
+You could just as well use @samp{$(<)} in place of @samp{$<}.
+
+@node Pattern Match, Match-Anything Rules, Automatic Variables, Pattern Rules
+@subsection How Patterns Match
+
+@cindex stem
+A target pattern is composed of a @samp{%} between a prefix and a suffix,
+either or both of which may be empty.  The pattern matches a file name only
+if the file name starts with the prefix and ends with the suffix, without
+overlap.  The text between the prefix and the suffix is called the
+@dfn{stem}.  Thus, when the pattern @samp{%.o} matches the file name
+@file{test.o}, the stem is @samp{test}.  The pattern rule prerequisites are
+turned into actual file names by substituting the stem for the character
+@samp{%}.  Thus, if in the same example one of the prerequisites is written
+as @samp{%.c}, it expands to @samp{test.c}.@refill
+
+When the target pattern does not contain a slash (and it usually does
+not), directory names in the file names are removed from the file name
+before it is compared with the target prefix and suffix.  After the
+comparison of the file name to the target pattern, the directory
+names, along with the slash that ends them, are added on to the
+prerequisite file names generated from the pattern rule's prerequisite
+patterns and the file name.  The directories are ignored only for the
+purpose of finding an implicit rule to use, not in the application of
+that rule.  Thus, @samp{e%t} matches the file name @file{src/eat},
+with @samp{src/a} as the stem.  When prerequisites are turned into file
+names, the directories from the stem are added at the front, while the
+rest of the stem is substituted for the @samp{%}.  The stem
+@samp{src/a} with a prerequisite pattern @samp{c%r} gives the file name
+@file{src/car}.@refill
+
+@cindex pattern rules, order of
+@cindex order of pattern rules
+A pattern rule can be used to build a given file only if there is a
+target pattern that matches the file name, @emph{and} all
+prerequisites in that rule either exist or can be built.  The rules
+you write take precedence over those that are built in. Note however,
+that a rule whose prerequisites actually exist or are mentioned always
+takes priority over a rule with prerequisites that must be made by
+chaining other implicit rules.
+
+@cindex stem, shortest
+It is possible that more than one pattern rule will meet these
+criteria.  In that case, @code{make} will choose the rule with the
+shortest stem (that is, the pattern that matches most specifically).
+If more than one pattern rule has the shortest stem, @code{make} will
+choose the first one found in the makefile.
+
+This algorithm results in more specific rules being preferred over
+more generic ones; for example:
+
+@example
+%.o: %.c
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@@
+
+%.o : %.f
+        $(COMPILE.F) $(OUTPUT_OPTION) $<
+
+lib/%.o: lib/%.c
+        $(CC) -fPIC -c $(CFLAGS) $(CPPFLAGS) $< -o $@@
+@end example
+
+Given these rules and asked to build @file{bar.o} where both
+@file{bar.c} and @file{bar.f} exist, @code{make} will choose the first
+rule and compile @file{bar.c} into @file{bar.o}.  In the same
+situation where @file{bar.c} does not exist, then @code{make} will
+choose the second rule and compile @file{bar.f} into @file{bar.o}.
+
+If @code{make} is asked to build @file{lib/bar.o} and both
+@file{lib/bar.c} and @file{lib/bar.f} exist, then the third rule will
+be chosen since the stem for this rule (@samp{bar}) is shorter than
+the stem for the first rule (@samp{lib/bar}).  If @file{lib/bar.c}
+does not exist then the third rule is not eligible and the second rule
+will be used, even though the stem is longer.
+
+@node Match-Anything Rules, Canceling Rules, Pattern Match, Pattern Rules
+@subsection Match-Anything Pattern Rules
+
+@cindex match-anything rule
+@cindex terminal rule
+When a pattern rule's target is just @samp{%}, it matches any file name
+whatever.  We call these rules @dfn{match-anything} rules.  They are very
+useful, but it can take a lot of time for @code{make} to think about them,
+because it must consider every such rule for each file name listed either
+as a target or as a prerequisite.
+
+Suppose the makefile mentions @file{foo.c}.  For this target, @code{make}
+would have to consider making it by linking an object file @file{foo.c.o},
+or by C compilation-and-linking in one step from @file{foo.c.c}, or by
+Pascal compilation-and-linking from @file{foo.c.p}, and many other
+possibilities.
+
+We know these possibilities are ridiculous since @file{foo.c} is a C source
+file, not an executable.  If @code{make} did consider these possibilities,
+it would ultimately reject them, because files such as @file{foo.c.o} and
+@file{foo.c.p} would not exist.  But these possibilities are so
+numerous that @code{make} would run very slowly if it had to consider
+them.@refill
+
+To gain speed, we have put various constraints on the way @code{make}
+considers match-anything rules.  There are two different constraints that
+can be applied, and each time you define a match-anything rule you must
+choose one or the other for that rule.
+
+One choice is to mark the match-anything rule as @dfn{terminal} by defining
+it with a double colon.  When a rule is terminal, it does not apply unless
+its prerequisites actually exist.  Prerequisites that could be made with
+other implicit rules are not good enough.  In other words, no further
+chaining is allowed beyond a terminal rule.
+
+For example, the built-in implicit rules for extracting sources from RCS
+and SCCS files are terminal; as a result, if the file @file{foo.c,v} does
+not exist, @code{make} will not even consider trying to make it as an
+intermediate file from @file{foo.c,v.o} or from @file{RCS/SCCS/s.foo.c,v}.
+RCS and SCCS files are generally ultimate source files, which should not be
+remade from any other files; therefore, @code{make} can save time by not
+looking for ways to remake them.@refill
+
+If you do not mark the match-anything rule as terminal, then it is
+non-terminal.  A non-terminal match-anything rule cannot apply to a file name
+that indicates a specific type of data.  A file name indicates a specific
+type of data if some non-match-anything implicit rule target matches it.
+
+For example, the file name @file{foo.c} matches the target for the pattern
+rule @samp{%.c : %.y} (the rule to run Yacc).  Regardless of whether this
+rule is actually applicable (which happens only if there is a file
+@file{foo.y}), the fact that its target matches is enough to prevent
+consideration of any non-terminal match-anything rules for the file
+@file{foo.c}.  Thus, @code{make} will not even consider trying to make
+@file{foo.c} as an executable file from @file{foo.c.o}, @file{foo.c.c},
+@file{foo.c.p}, etc.@refill
+
+The motivation for this constraint is that non-terminal match-anything
+rules are used for making files containing specific types of data (such as
+executable files) and a file name with a recognized suffix indicates some
+other specific type of data (such as a C source file).
+
+Special built-in dummy pattern rules are provided solely to recognize
+certain file names so that non-terminal match-anything rules will not be
+considered.  These dummy rules have no prerequisites and no recipes, and
+they are ignored for all other purposes.  For example, the built-in
+implicit rule
+
+@example
+%.p :
+@end example
+
+@noindent
+exists to make sure that Pascal source files such as @file{foo.p} match a
+specific target pattern and thereby prevent time from being wasted looking
+for @file{foo.p.o} or @file{foo.p.c}.
+
+Dummy pattern rules such as the one for @samp{%.p} are made for every
+suffix listed as valid for use in suffix rules (@pxref{Suffix Rules, ,Old-Fashioned Suffix Rules}).
+
+@node Canceling Rules,  , Match-Anything Rules, Pattern Rules
+@subsection Canceling Implicit Rules
+
+You can override a built-in implicit rule (or one you have defined
+yourself) by defining a new pattern rule with the same target and
+prerequisites, but a different recipe.  When the new rule is defined, the
+built-in one is replaced.  The new rule's position in the sequence of
+implicit rules is determined by where you write the new rule.
+
+You can cancel a built-in implicit rule by defining a pattern rule with the
+same target and prerequisites, but no recipe.  For example, the following
+would cancel the rule that runs the assembler:
+
+@example
+%.o : %.s
+@end example
+
+@node Last Resort, Suffix Rules, Pattern Rules, Implicit Rules
+@section Defining Last-Resort Default Rules
+@cindex last-resort default rules
+@cindex default rules, last-resort
+
+You can define a last-resort implicit rule by writing a terminal
+match-anything pattern rule with no prerequisites (@pxref{Match-Anything
+Rules}).  This is just like any other pattern rule; the only thing
+special about it is that it will match any target.  So such a rule's
+recipe is used for all targets and prerequisites that have no recipe
+of their own and for which no other implicit rule applies.
+
+For example, when testing a makefile, you might not care if the source
+files contain real data, only that they exist.  Then you might do this:
+
+@example
+%::
+        touch $@@
+@end example
+
+@noindent
+to cause all the source files needed (as prerequisites) to be created
+automatically.
+
+@findex .DEFAULT
+You can instead define a recipe to be used for targets for which there
+are no rules at all, even ones which don't specify recipes.  You do
+this by writing a rule for the target @code{.DEFAULT}.  Such a rule's
+recipe is used for all prerequisites which do not appear as targets in
+any explicit rule, and for which no implicit rule applies.  Naturally,
+there is no @code{.DEFAULT} rule unless you write one.
+
+If you use @code{.DEFAULT} with no recipe or prerequisites:
+
+@example
+.DEFAULT:
+@end example
+
+@noindent
+the recipe previously stored for @code{.DEFAULT} is cleared.  Then
+@code{make} acts as if you had never defined @code{.DEFAULT} at all.
+
+If you do not want a target to get the recipe from a match-anything
+pattern rule or @code{.DEFAULT}, but you also do not want any recipe
+to be run for the target, you can give it an empty recipe
+(@pxref{Empty Recipes, ,Defining Empty Recipes}).@refill
+
+You can use a last-resort rule to override part of another makefile.
+@xref{Overriding Makefiles, , Overriding Part of Another Makefile}.
+
+@node Suffix Rules, Implicit Rule Search, Last Resort, Implicit Rules
+@section Old-Fashioned Suffix Rules
+@cindex old-fashioned suffix rules
+@cindex suffix rule
+
+@dfn{Suffix rules} are the old-fashioned way of defining implicit rules for
+@code{make}.  Suffix rules are obsolete because pattern rules are more
+general and clearer.  They are supported in GNU @code{make} for
+compatibility with old makefiles.  They come in two kinds:
+@dfn{double-suffix} and @dfn{single-suffix}.@refill
+
+A double-suffix rule is defined by a pair of suffixes: the target suffix
+and the source suffix.  It matches any file whose name ends with the
+target suffix.  The corresponding implicit prerequisite is made by
+replacing the target suffix with the source suffix in the file name.  A
+two-suffix rule whose target and source suffixes are @samp{.o} and
+@samp{.c} is equivalent to the pattern rule @samp{%.o : %.c}.
+
+A single-suffix rule is defined by a single suffix, which is the source
+suffix.  It matches any file name, and the corresponding implicit
+prerequisite name is made by appending the source suffix.  A single-suffix
+rule whose source suffix is @samp{.c} is equivalent to the pattern rule
+@samp{% : %.c}.
+
+Suffix rule definitions are recognized by comparing each rule's target
+against a defined list of known suffixes.  When @code{make} sees a rule
+whose target is a known suffix, this rule is considered a single-suffix
+rule.  When @code{make} sees a rule whose target is two known suffixes
+concatenated, this rule is taken as a double-suffix rule.
+
+For example, @samp{.c} and @samp{.o} are both on the default list of
+known suffixes.  Therefore, if you define a rule whose target is
+@samp{.c.o}, @code{make} takes it to be a double-suffix rule with source
+suffix @samp{.c} and target suffix @samp{.o}.  Here is the old-fashioned
+way to define the rule for compiling a C source file:@refill
+
+@example
+.c.o:
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@@ $<
+@end example
+
+Suffix rules cannot have any prerequisites of their own.  If they have any,
+they are treated as normal files with funny names, not as suffix rules.
+Thus, the rule:
+
+@example
+.c.o: foo.h
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@@ $<
+@end example
+
+@noindent
+tells how to make the file @file{.c.o} from the prerequisite file
+@file{foo.h}, and is not at all like the pattern rule:
+
+@example
+%.o: %.c foo.h
+        $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@@ $<
+@end example
+
+@noindent
+which tells how to make @samp{.o} files from @samp{.c} files, and makes all
+@samp{.o} files using this pattern rule also depend on @file{foo.h}.
+
+Suffix rules with no recipe are also meaningless.  They do not remove
+previous rules as do pattern rules with no recipe (@pxref{Canceling
+Rules, , Canceling Implicit Rules}).  They simply enter the suffix or
+pair of suffixes concatenated as a target in the data base.@refill
+
+@findex .SUFFIXES
+The known suffixes are simply the names of the prerequisites of the special
+target @code{.SUFFIXES}.  You can add your own suffixes by writing a rule
+for @code{.SUFFIXES} that adds more prerequisites, as in:
+
+@example
+.SUFFIXES: .hack .win
+@end example
+
+@noindent
+which adds @samp{.hack} and @samp{.win} to the end of the list of suffixes.
+
+If you wish to eliminate the default known suffixes instead of just adding
+to them, write a rule for @code{.SUFFIXES} with no prerequisites.  By
+special dispensation, this eliminates all existing prerequisites of
+@code{.SUFFIXES}.  You can then write another rule to add the suffixes you
+want.  For example,
+
+@example
+@group
+.SUFFIXES:            # @r{Delete the default suffixes}
+.SUFFIXES: .c .o .h   # @r{Define our suffix list}
+@end group
+@end example
+
+The @samp{-r} or @samp{--no-builtin-rules} flag causes the default
+list of suffixes to be empty.
+
+@vindex SUFFIXES
+The variable @code{SUFFIXES} is defined to the default list of suffixes
+before @code{make} reads any makefiles.  You can change the list of suffixes
+with a rule for the special target @code{.SUFFIXES}, but that does not alter
+this variable.
+
+@node Implicit Rule Search,  , Suffix Rules, Implicit Rules
+@section Implicit Rule Search Algorithm
+@cindex implicit rule, search algorithm
+@cindex search algorithm, implicit rule
+
+Here is the procedure @code{make} uses for searching for an implicit rule
+for a target @var{t}.  This procedure is followed for each double-colon
+rule with no recipe, for each target of ordinary rules none of which have
+a recipe, and for each prerequisite that is not the target of any rule.  It
+is also followed recursively for prerequisites that come from implicit
+rules, in the search for a chain of rules.
+
+Suffix rules are not mentioned in this algorithm because suffix rules are
+converted to equivalent pattern rules once the makefiles have been read in.
+
+For an archive member target of the form
+@samp{@var{archive}(@var{member})}, the following algorithm is run
+twice, first using the entire target name @var{t}, and second using
+@samp{(@var{member})} as the target @var{t} if the first run found no
+rule.@refill
+
+@enumerate
+@item
+Split @var{t} into a directory part, called @var{d}, and the rest,
+called @var{n}.  For example, if @var{t} is @samp{src/foo.o}, then
+@var{d} is @samp{src/} and @var{n} is @samp{foo.o}.@refill
+
+@item
+Make a list of all the pattern rules one of whose targets matches
+@var{t} or @var{n}.  If the target pattern contains a slash, it is
+matched against @var{t}; otherwise, against @var{n}.
+
+@item
+If any rule in that list is @emph{not} a match-anything rule, then
+remove all non-terminal match-anything rules from the list.
+
+@item
+Remove from the list all rules with no recipe.
+
+@item
+For each pattern rule in the list:
+
+@enumerate a
+@item
+Find the stem @var{s}, which is the nonempty part of @var{t} or @var{n}
+matched by the @samp{%} in the target pattern.@refill
+
+@item
+Compute the prerequisite names by substituting @var{s} for @samp{%}; if
+the target pattern does not contain a slash, append @var{d} to
+the front of each prerequisite name.@refill
+
+@item
+Test whether all the prerequisites exist or ought to exist.  (If a
+file name is mentioned in the makefile as a target or as an explicit
+prerequisite, then we say it ought to exist.)
+
+If all prerequisites exist or ought to exist, or there are no prerequisites,
+then this rule applies.
+@end enumerate
+
+@item
+If no pattern rule has been found so far, try harder.
+For each pattern rule in the list:
+
+@enumerate a
+@item
+If the rule is terminal, ignore it and go on to the next rule.
+
+@item
+Compute the prerequisite names as before.
+
+@item
+Test whether all the prerequisites exist or ought to exist.
+
+@item
+For each prerequisite that does not exist, follow this algorithm
+recursively to see if the prerequisite can be made by an implicit
+rule.
+
+@item
+If all prerequisites exist, ought to exist, or can be
+made by implicit rules, then this rule applies.
+@end enumerate
+
+@item
+If no implicit rule applies, the rule for @code{.DEFAULT}, if any,
+applies.  In that case, give @var{t} the same recipe that
+@code{.DEFAULT} has.  Otherwise, there is no recipe for @var{t}.
+@end enumerate
+
+Once a rule that applies has been found, for each target pattern of
+the rule other than the one that matched @var{t} or @var{n}, the
+@samp{%} in the pattern is replaced with @var{s} and the resultant
+file name is stored until the recipe to remake the target file @var{t}
+is executed.  After the recipe is executed, each of these stored file
+names are entered into the data base and marked as having been updated
+and having the same update status as the file @var{t}.
+
+When the recipe of a pattern rule is executed for @var{t}, the
+automatic variables are set corresponding to the target and
+prerequisites.  @xref{Automatic Variables}.
+
+@node Archives, Extending make, Implicit Rules, Top
+@chapter Using @code{make} to Update Archive Files
+@cindex archive
+
+@dfn{Archive files} are files containing named sub-files called
+@dfn{members}; they are maintained with the program @code{ar} and their
+main use is as subroutine libraries for linking.
+
+@menu
+* Archive Members::             Archive members as targets.
+* Archive Update::              The implicit rule for archive member targets.
+* Archive Pitfalls::            Dangers to watch out for when using archives.
+* Archive Suffix Rules::        You can write a special kind of suffix rule
+                                  for updating archives.
+@end menu
+
+@node Archive Members, Archive Update, Archives, Archives
+@section Archive Members as Targets
+@cindex archive member targets
+
+An individual member of an archive file can be used as a target or
+prerequisite in @code{make}.  You specify the member named @var{member} in
+archive file @var{archive} as follows:
+
+@example
+@var{archive}(@var{member})
+@end example
+
+@noindent
+This construct is available only in targets and prerequisites, not in
+recipes!  Most programs that you might use in recipes do not support
+this syntax and cannot act directly on archive members.  Only
+@code{ar} and other programs specifically designed to operate on
+archives can do so.  Therefore, valid recipes to update an archive
+member target probably must use @code{ar}.  For example, this rule
+says to create a member @file{hack.o} in archive @file{foolib} by
+copying the file @file{hack.o}:
+
+@example
+foolib(hack.o) : hack.o
+        ar cr foolib hack.o
+@end example
+
+In fact, nearly all archive member targets are updated in just this way
+and there is an implicit rule to do it for you.  @strong{Please note:} The
+@samp{c} flag to @code{ar} is required if the archive file does not
+already exist.
+
+To specify several members in the same archive, you can write all the
+member names together between the parentheses.  For example:
+
+@example
+foolib(hack.o kludge.o)
+@end example
+
+@noindent
+is equivalent to:
+
+@example
+foolib(hack.o) foolib(kludge.o)
+@end example
+
+@cindex wildcard, in archive member
+You can also use shell-style wildcards in an archive member reference.
+@xref{Wildcards, ,Using Wildcard Characters in File Names}.  For
+example, @w{@samp{foolib(*.o)}} expands to all existing members of the
+@file{foolib} archive whose names end in @samp{.o}; perhaps
+@samp{@w{foolib(hack.o)} @w{foolib(kludge.o)}}.
+
+@node Archive Update, Archive Pitfalls, Archive Members, Archives
+@section Implicit Rule for Archive Member Targets
+
+Recall that a target that looks like @file{@var{a}(@var{m})} stands for the
+member named @var{m} in the archive file @var{a}.
+
+When @code{make} looks for an implicit rule for such a target, as a special
+feature it considers implicit rules that match @file{(@var{m})}, as well as
+those that match the actual target @file{@var{a}(@var{m})}.
+
+This causes one special rule whose target is @file{(%)} to match.  This
+rule updates the target @file{@var{a}(@var{m})} by copying the file @var{m}
+into the archive.  For example, it will update the archive member target
+@file{foo.a(bar.o)} by copying the @emph{file} @file{bar.o} into the
+archive @file{foo.a} as a @emph{member} named @file{bar.o}.
+
+When this rule is chained with others, the result is very powerful.
+Thus, @samp{make "foo.a(bar.o)"} (the quotes are needed to protect the
+@samp{(} and @samp{)} from being interpreted specially by the shell) in
+the presence of a file @file{bar.c} is enough to cause the following
+recipe to be run, even without a makefile:
+
+@example
+cc -c bar.c -o bar.o
+ar r foo.a bar.o
+rm -f bar.o
+@end example
+
+@noindent
+Here @code{make} has envisioned the file @file{bar.o} as an intermediate
+file.  @xref{Chained Rules, ,Chains of Implicit Rules}.
+
+Implicit rules such as this one are written using the automatic variable
+@samp{$%}.  @xref{Automatic Variables}.
+
+An archive member name in an archive cannot contain a directory name, but
+it may be useful in a makefile to pretend that it does.  If you write an
+archive member target @file{foo.a(dir/file.o)}, @code{make} will perform
+automatic updating with this recipe:
+
+@example
+ar r foo.a dir/file.o
+@end example
+
+@noindent
+which has the effect of copying the file @file{dir/file.o} into a member
+named @file{file.o}.  In connection with such usage, the automatic variables
+@code{%D} and @code{%F} may be useful.
+
+@menu
+* Archive Symbols::             How to update archive symbol directories.
+@end menu
+
+@node Archive Symbols,  , Archive Update, Archive Update
+@subsection Updating Archive Symbol Directories
+@cindex @code{__.SYMDEF}
+@cindex updating archive symbol directories
+@cindex archive symbol directory updating
+@cindex symbol directories, updating archive
+@cindex directories, updating archive symbol
+
+An archive file that is used as a library usually contains a special member
+named @file{__.SYMDEF} that contains a directory of the external symbol
+names defined by all the other members.  After you update any other
+members, you need to update @file{__.SYMDEF} so that it will summarize the
+other members properly.  This is done by running the @code{ranlib} program:
+
+@example
+ranlib @var{archivefile}
+@end example
+
+Normally you would put this command in the rule for the archive file,
+and make all the members of the archive file prerequisites of that rule.
+For example,
+
+@example
+libfoo.a: libfoo.a(x.o) libfoo.a(y.o) @dots{}
+        ranlib libfoo.a
+@end example
+
+@noindent
+The effect of this is to update archive members @file{x.o}, @file{y.o},
+etc., and then update the symbol directory member @file{__.SYMDEF} by
+running @code{ranlib}.  The rules for updating the members are not shown
+here; most likely you can omit them and use the implicit rule which copies
+files into the archive, as described in the preceding section.
+
+This is not necessary when using the GNU @code{ar} program, which
+updates the @file{__.SYMDEF} member automatically.
+
+@node Archive Pitfalls, Archive Suffix Rules, Archive Update, Archives
+@section Dangers When Using Archives
+@cindex archive, and parallel execution
+@cindex parallel execution, and archive update
+@cindex archive, and @code{-j}
+@cindex @code{-j}, and archive update
+
+It is important to be careful when using parallel execution (the
+@code{-j} switch; @pxref{Parallel, ,Parallel Execution}) and archives.
+If multiple @code{ar} commands run at the same time on the same archive
+file, they will not know about each other and can corrupt the file.
+
+Possibly a future version of @code{make} will provide a mechanism to
+circumvent this problem by serializing all recipes that operate on the
+same archive file.  But for the time being, you must either write your
+makefiles to avoid this problem in some other way, or not use @code{-j}.
+
+@node Archive Suffix Rules,  , Archive Pitfalls, Archives
+@section Suffix Rules for Archive Files
+@cindex suffix rule, for archive
+@cindex archive, suffix rule for
+@cindex library archive, suffix rule for
+@cindex @code{.a} (archives)
+
+You can write a special kind of suffix rule for dealing with archive
+files.  @xref{Suffix Rules}, for a full explanation of suffix rules.
+Archive suffix rules are obsolete in GNU @code{make}, because pattern
+rules for archives are a more general mechanism (@pxref{Archive
+Update}).  But they are retained for compatibility with other
+@code{make}s.
+
+To write a suffix rule for archives, you simply write a suffix rule
+using the target suffix @samp{.a} (the usual suffix for archive files).
+For example, here is the old-fashioned suffix rule to update a library
+archive from C source files:
+
+@example
+@group
+.c.a:
+        $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
+        $(AR) r $@@ $*.o
+        $(RM) $*.o
+@end group
+@end example
+
+@noindent
+This works just as if you had written the pattern rule:
+
+@example
+@group
+(%.o): %.c
+        $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
+        $(AR) r $@@ $*.o
+        $(RM) $*.o
+@end group
+@end example
+
+In fact, this is just what @code{make} does when it sees a suffix rule
+with @samp{.a} as the target suffix.  Any double-suffix rule
+@w{@samp{.@var{x}.a}} is converted to a pattern rule with the target
+pattern @samp{(%.o)} and a prerequisite pattern of @samp{%.@var{x}}.
+
+Since you might want to use @samp{.a} as the suffix for some other kind
+of file, @code{make} also converts archive suffix rules to pattern rules
+in the normal way (@pxref{Suffix Rules}).  Thus a double-suffix rule
+@w{@samp{.@var{x}.a}} produces two pattern rules: @samp{@w{(%.o):}
+@w{%.@var{x}}} and @samp{@w{%.a}: @w{%.@var{x}}}.@refill
+
+@node Extending make, Features, Archives, Top
+@chapter Extending GNU @code{make}
+@cindex make extensions
+
+GNU @code{make} provides many advanced capabilities, including many
+useful functions.  However, it does not contain a complete programming
+language and so it has limitations.  Sometimes these limitations can be
+overcome through use of the @code{shell} function to invoke a separate
+program, although this can be inefficient.
+
+In cases where the built-in capabilities of GNU @code{make} are
+insufficient to your requirements there are two options for extending
+@code{make}.  On systems where it's provided, you can utilize GNU
+Guile as an embedded scripting language (@pxref{Guile Integration,,GNU
+Guile Integration}).  On systems which support dynamically loadable
+objects, you can write your own extension in any language (which can
+be compiled into such an object) and load it to provide extended
+capabilities (@pxref{load Directive, ,The @code{load} Directive}).
+
+@menu
+* Guile Integration::           Using Guile as an embedded scripting language.
+* Loading Objects::             Loading dynamic objects as extensions.
+@end menu
+
+@node Guile Integration, Loading Objects, Extending make, Extending make
+@section GNU Guile Integration
+@cindex Guile
+@cindex extensions, Guile
+
+GNU @code{make} may be built with support for GNU Guile as an embedded
+extension language.  Guile implements the Scheme language.  A review
+of GNU Guile and the Scheme language and its features is beyond the
+scope of this manual: see the documentation for GNU Guile and Scheme.
+
+You can determine if @code{make} contains support for Guile by
+examining the @code{.FEATURES} variable; it will contain the word
+@var{guile} if Guile support is available.
+
+The Guile integration provides one new @code{make} function: @code{guile}.
+The @code{guile} function takes one argument which is first expanded
+by @code{make} in the normal fashion, then passed to the GNU Guile
+evaluator.  The result of the evaluator is converted into a string and
+used as the expansion of the @code{guile} function in the makefile.
+
+In addition, GNU @code{make} exposes Guile procedures for use in Guile
+scripts.
+
+@menu
+* Guile Types::                 Converting Guile types to @code{make} strings.
+* Guile Interface::             Invoking @code{make} functions from Guile.
+* Guile Example::               Example using Guile in @code{make}.
+@end menu
+
+@node Guile Types, Guile Interface, Guile Integration, Guile Integration
+@subsection Conversion of Guile Types
+@cindex convert guile types
+@cindex guile, conversion of types
+@cindex types, conversion of
+
+There is only one ``data type'' in @code{make}: a string.  GNU Guile,
+on the other hand, provides a rich variety of different data types.
+An important aspect of the interface between @code{make} and GNU Guile
+is the conversion of Guile data types into @code{make} strings.
+
+This conversion is relevant in two places: when a makefile invokes the
+@code{guile} function to evaluate a Guile expression, the result of
+that evaluation must be converted into a make string so it can be
+further evaluated by @code{make}.  And secondly, when a Guile script
+invokes one of the procedures exported by @code{make} the argument
+provided to the procedure must be converted into a string.
+
+The conversion of Guile types into @code{make} strings is as below:
+
+@table @code
+@item #f
+False is converted into the empty string: in @code{make} conditionals
+the empty string is considered false.
+
+@item #t
+True is converted to the string @samp{#t}: in @code{make} conditionals
+any non-empty string is considered true.
+
+@item symbol
+@item number
+A symbol or number is converted into the string representation of that
+symbol or number.
+
+@item character
+A printable character is converted to the same character.
+
+@item string
+A string containing only printable characters is converted to the same
+string.
+
+@item list
+A list is converted recursively according to the above rules.  This
+implies that any structured list will be flattened (that is, a result
+of @samp{'(a b (c d) e)} will be converted to the @code{make} string
+@samp{a b c d e}).
+
+@item other
+Any other Guile type results in an error.  In future versions of
+@code{make}, other Guile types may be converted.
+
+@end table
+
+The translation of @samp{#f} (to the empty string) and @samp{#t} (to
+the non-empty string @samp{#t}) is designed to allow you to use Guile
+boolean results directly as @code{make} boolean conditions.  For
+example:
+
+@example
+$(if $(guile (access? "myfile" R_OK)),$(info myfile exists))
+@end example
+
+As a consequence of these conversion rules you must consider the
+result of your Guile script, as that result will be converted into a
+string and parsed by @code{make}.  If there is no natural result for
+the script (that is, the script exists solely for its side-effects),
+you should add @samp{#f} as the final expression in order to avoid
+syntax errors in your makefile.
+
+@node Guile Interface, Guile Example, Guile Types, Guile Integration
+@subsection Interfaces from Guile to @code{make}
+@cindex make interface to guile
+@cindex make procedures in guile
+
+In addition to the @code{guile} function available in makefiles,
+@code{make} exposes some procedures for use in your Guile scripts.  At
+startup @code{make} creates a new Guile module, @code{gnu make}, and
+exports these procedures as public interfaces from that module:
+
+@table @code
+@item gmk-expand
+@findex gmk-expand
+This procedure takes a single argument which is converted into a
+string.  The string is expanded by @code{make} using normal
+@code{make} expansion rules.  The result of the expansion is converted
+into a Guile string and provided as the result of the procedure.
+
+@item gmk-eval
+@findex gmk-eval
+This procedure takes a single argument which is converted into a
+string.  The string is evaluated by @code{make} as if it were a
+makefile.  This is the same capability available via the @code{eval}
+function (@pxref{Eval Function}).  The result of the @code{gmk-eval}
+procedure is always the empty string.
+
+Note that @code{gmk-eval} is not quite the same as using
+@code{gmk-expand} with the @code{eval} function: in the latter case
+the evaluated string will be expanded @emph{twice}; first by
+@code{gmk-expand}, then again by the @code{eval} function.
+
+@end table
+
+@node Guile Example,  , Guile Interface, Guile Integration
+@subsection Example Using Guile in @code{make}
+@cindex Guile example
+@cindex example using Guile
+
+Here is a very simple example using GNU Guile to manage writing to a
+file.  These Guile procedures simply open a file, allow writing to the
+file (one string per line), and close the file.  Note that because we
+cannot store complex values such as Guile ports in @code{make}
+variables, we'll keep the port as a global variable in the Guile
+interpreter.
+
+You can create Guile functions easily using @code{define}/@code{endef}
+to create a Guile script, then use the @code{guile} function to
+internalize it:
+
+@example
+@group
+define GUILEIO
+;; A simple Guile IO library for GNU make
+
+(define MKPORT #f)
+
+(define (mkopen name mode)
+  (set! MKPORT (open-file name mode))
+  #f)
+
+(define (mkwrite s)
+  (display s MKPORT)
+  (newline MKPORT)
+  #f)
+
+(define (mkclose)
+  (close-port MKPORT)
+  #f)
+
+#f
+endef
+
+# Internalize the Guile IO functions
+$(guile $(GUILEIO))
+@end group
+@end example
+
+If you have a significant amount of Guile support code, you might
+consider keeping it in a different file (e.g., @file{guileio.scm}) and
+then loading it in your makefile using the @code{guile} function:
+
+@example
+$(guile (load "guileio.scm"))
+@end example
+
+An advantage to this method is that when editing @file{guileio.scm},
+your editor will understand that this file contains Scheme syntax
+rather than makefile syntax.
+
+Now you can use these Guile functions to create files.  Suppose you
+need to operate on a very large list, which cannot fit on the command
+line, but the utility you're using accepts the list as input as well:
+
+@example
+@group
+prog: $(PREREQS)
+        @@$(guile (mkopen "tmp.out" "w")) \
+         $(foreach X,$^,$(guile (mkwrite "$(X)"))) \
+         $(guile (mkclose))
+        $(LINK) < tmp.out
+@end group
+@end example
+
+A more comprehensive suite of file manipulation procedures is possible
+of course.  You could, for example, maintain multiple output files at
+the same time by choosing a symbol for each one and using it as the
+key to a hash table, where the value is a port, then returning the
+symbol to be stored in a @code{make} variable.
+
+@node Loading Objects,  , Guile Integration, Extending make
+@section Loading Dynamic Objects
+@cindex loaded objects
+@cindex objects, loaded
+@cindex extensions, loading
+
+@cartouche
+@quotation Warning
+The @code{load} directive and extension capability is considered a
+``technology preview'' in this release of GNU make.  We encourage you
+to experiment with this feature and we appreciate any feedback on it.
+However we cannot guarantee to maintain backward-compatibility in the
+next release.  Consider using GNU Guile instead for extending GNU make
+(@pxref{Guile Function, ,The @code{guile} Function}).
+@end quotation
+@end cartouche
+
+Many operating systems provide a facility for dynamically loading
+compiled objects.  If your system provides this facility, GNU
+@code{make} can make use of it to load dynamic objects at runtime,
+providing new capabilities which may then be invoked by your makefile.
+
+The @code{load} directive is used to load a dynamic object.  Once the
+object is loaded, a ``setup'' function will be invoked to allow the
+object to initialize itself and register new facilities with GNU
+@code{make}.  A dynamic object might include new @code{make} functions,
+for example, and the ``setup'' function would register them with GNU
+@code{make}'s function handling system.
+
+@menu
+* load Directive::              Loading dynamic objects as extensions.
+* Remaking Loaded Objects::     How loaded objects get remade.
+* Loaded Object API::           Programmatic interface for loaded objects.
+* Loaded Object Example::       Example of a loaded object
+@end menu
+
+@node load Directive, Remaking Loaded Objects, Loading Objects, Loading Objects
+@subsection The @code{load} Directive
+@cindex load directive
+@cindex extensions, load directive
+
+Objects are loaded into GNU @code{make} by placing the @code{load}
+directive into your makefile.  The syntax of the @code{load} directive
+is as follows:
+
+@findex load
+@example
+load @var{object-file} @dots{}
+@end example
+
+or:
+
+@example
+load @var{object-file}(@var{symbol-name}) @dots{}
+@end example
+
+The file @var{object-file} is dynamically loaded by GNU @code{make}.
+If @var{object-file} does not include a directory path then it is
+first looked for in the current directory.  If it is not found there,
+or a directory path is included, then system-specific paths will be
+searched.  If the load fails for any reason, @code{make} will print a
+message and exit.
+
+If the load succeeds @code{make} will invoke an initializing function.
+
+If @var{symbol-name} is provided, it will be used as the name of the
+initializing function.
+
+If no @var{symbol-name} is provided, the initializing function name is
+created by taking the base file name of @var{object-file}, up to the
+first character which is not a valid symbol name character
+(alphanumerics and underscores are valid symbol name characters).  To
+this prefix will be appended the suffix @code{_gmk_setup}.
+
+More than one object file may be loaded with a single @code{load}
+directive, and both forms of @code{load} arguments may be used in the
+same directive.
+
+The initializing function will be provided the file name and line
+number of the invocation of the @code{load} operation.  It should
+return a value of type @code{int}, which must be @code{0} on failure
+and non-@code{0} on success.  If the return value is @code{-1}, then
+GNU make will @emph{not} attempt to rebuild the object file
+(@pxref{Remaking Loaded Objects, ,How Loaded Objects Are Remade}).
+
+For example:
+
+@example
+load ../mk_funcs.so
+@end example
+
+will load the dynamic object @file{../mk_funcs.so}.  After the object
+is loaded, @code{make} will invoke the function (assumed to be defined
+by the shared object) @code{mk_funcs_gmk_setup}.
+
+On the other hand:
+
+@example
+load ../mk_funcs.so(init_mk_func)
+@end example
+
+will load the dynamic object @file{../mk_funcs.so}.  After the object
+is loaded, @code{make} will invoke the function @code{init_mk_func}.
+
+Regardless of how many times an object file appears in a @code{load}
+directive, it will only be loaded (and its setup function will only
+be invoked) once.
+
+@vindex .LOADED
+After an object has been successfully loaded, its file name is
+appended to the @code{.LOADED} variable.
+
+@findex -load
+If you would prefer that failure to load a dynamic object not be
+reported as an error, you can use the @code{-load} directive instead
+of @code{load}.  GNU @code{make} will not fail and no message will be
+generated if an object fails to load.  The failed object is not added
+to the @code{.LOADED} variable, which can then be consulted to
+determine if the load was successful.
+
+@node Remaking Loaded Objects, Loaded Object API, load Directive, Loading Objects
+@subsection How Loaded Objects Are Remade
+@cindex updating loaded objects
+@cindex remaking loaded objects
+@cindex loaded objects, remaking of
+
+Loaded objects undergo the same re-make procedure as makefiles
+(@pxref{Remaking Makefiles, ,How Makefiles Are Remade}).  If any
+loaded object is recreated, then @code{make} will start from scratch
+and re-read all the makefiles, and reload the object files again.  It
+is not necessary for the loaded object to do anything special to
+support this.@refill
+
+It's up to the makefile author to provide the rules needed for
+rebuilding the loaded object.
+
+@node Loaded Object API, Loaded Object Example, Remaking Loaded Objects, Loading Objects
+@subsection Loaded Object Interface
+@cindex loaded object API
+@cindex interface for loaded objects
+
+@cartouche
+@quotation Warning
+For this feature to be useful your extensions will need to invoke
+various functions internal to GNU @code{make}.  The programming
+interfaces provided in this release should not be considered stable:
+functions may be added, removed, or change calling signatures or
+implementations in future versions of GNU @code{make}.
+@end quotation
+@end cartouche
+
+To be useful, loaded objects must be able to interact with GNU
+@code{make}.  This interaction includes both interfaces the loaded
+object provides to makefiles and also interfaces @code{make} provides
+to the loaded object to manipulate @code{make}'s operation.
+
+The interface between loaded objects and @code{make} is defined by the
+@file{gnumake.h} C header file.  All loaded objects written in C
+should include this header file.  Any loaded object not written in C
+will need to implement the interface defined in this header file.
+
+Typically, a loaded object will register one or more new GNU
+@code{make} functions using the @code{gmk_add_function} routine from
+within its setup function.  The implementations of these @code{make}
+functions may make use of the @code{gmk_expand} and @code{gmk_eval}
+routines to perform their tasks, then optionally return a string as
+the result of the function expansion.
+
+@subsubheading Loaded Object Licensing
+@cindex loaded object licensing
+@cindex plugin_is_GPL_compatible
+
+Every dynamic extension should define the global symbol
+@code{plugin_is_GPL_compatible} to assert that it has been licensed
+under a GPL-compatible license.  If this symbol does not exist,
+@code{make} emits a fatal error and exits when it tries to load your
+extension.
+
+The declared type of the symbol should be @code{int}. It does not need
+to be in any allocated section, though.  The code merely asserts that
+the symbol exists in the global scope. Something like this is enough:
+
+@example
+int plugin_is_GPL_compatible;
+@end example
+
+@subsubheading Data Structures
+
+@table @code
+@item gmk_floc
+This structure represents a filename/location pair.  It is provided
+when defining items, so GNU @code{make} can inform the user later
+where the definition occurred if necessary.
+@end table
+
+@subsubheading Registering Functions
+@findex gmk_add_function
+
+There is currently one way for makefiles to invoke operations provided
+by the loaded object: through the @code{make} function call
+interface.  A loaded object can register one or more new functions
+which may then be invoked from within the makefile in the same way as
+any other function.
+
+Use @code{gmk_add_function} to create a new @code{make} function.  Its
+arguments are as follows:
+
+@table @code
+@item name
+The function name.  This is what the makefile should use to invoke the
+function.  The name must be between 1 and 255 characters long and it
+may only contain alphanumeric, period (@samp{.}), dash (@samp{-}), and
+underscore (@samp{_}) characters.  It may not begin with a period.
+
+@item func_ptr
+A pointer to a function that @code{make} will invoke when it expands
+the function in a makefile.  This function must be defined by the
+loaded object.
+
+@item min_args
+The minimum number of arguments the function will accept.  Must be
+between 0 and 255.  GNU @code{make} will check this and fail before
+invoking @code{func_ptr} if the function was invoked with too few
+arguments.
+
+@item max_args
+The maximum number of arguments the function will accept.  Must be
+between 0 and 255.  GNU @code{make} will check this and fail before
+invoking @code{func_ptr} if the function was invoked with too few
+arguments.  If the value is 0, then any number of arguments is
+accepted.  If the value is greater than 0, then it must be greater
+than or equal to @code{min_args}.
+
+@item flags
+Flags that specify how this function will operate; the desired flags
+should be OR'd together.  If the @code{GMK_FUNC_NOEXPAND} flag is
+given then the function arguments will not be expanded before the
+function is called; otherwise they will be expanded first.
+@end table
+
+@subsubheading Registered Function Interface
+@findex gmk_func_ptr
+
+A function registered with @code{make} must match the
+@code{gmk_func_ptr} type.  It will be invoked with three parameters:
+@code{name} (the name of the function), @code{argc} (the number of
+arguments to the function), and @code{argv} (an array of pointers to
+arguments to the function).  The last pointer (that is,
+@code{argv[argc]}) will be null (@code{0}).
+
+The return value of the function is the result of expanding the
+function.  If the function expands to nothing the return value may be
+null.  Otherwise, it must be a pointer to a string created with
+@code{gmk_alloc}.  Once the function returns, @code{make} owns this
+string and will free it when appropriate; it cannot be accessed by the
+loaded object.
+
+@subsubheading GNU @code{make} Facilities
+
+There are some facilities exported by GNU @code{make} for use by
+loaded objects.  Typically these would be run from within the
+setup function and/or the functions registered via
+@code{gmk_add_function}, to retrieve or modify the data @code{make}
+works with.
+
+@table @code
+@item gmk_expand
+@findex gmk_expand
+This function takes a string and expands it using @code{make}
+expansion rules.  The result of the expansion is returned in a
+nil-terminated string buffer.  The caller is responsible for calling
+@code{gmk_free} with a pointer to the returned buffer when done.
+
+@item gmk_eval
+@findex gmk_eval
+This function takes a buffer and evaluates it as a segment of makefile
+syntax.  This function can be used to define new variables, new rules,
+etc.  It is equivalent to using the @code{eval} @code{make} function.
+@end table
+
+Note that there is a difference between @code{gmk_eval} and calling
+@code{gmk_expand} with a string using the @code{eval} function: in
+the latter case the string will be expanded @emph{twice}; once by
+@code{gmk_expand} and then again by the @code{eval} function.  Using
+@code{gmk_eval} the buffer is only expanded once, at most (as it's
+read by the @code{make} parser).
+
+@subsubheading Memory Management
+
+Some systems allow for different memory management schemes.  Thus you
+should never pass memory that you've allocated directly to any
+@code{make} function, nor should you attempt to directly free any
+memory returned to you by any @code{make} function.  Instead, use the
+@code{gmk_alloc} and @code{gmk_free} functions.
+
+In particular, the string returned to @code{make} by a function
+registered using @code{gmk_add_function} @emph{must} be allocated
+using @code{gmk_alloc}, and the string returned from the @code{make}
+@code{gmk_expand} function @emph{must} be freed (when no longer
+needed) using @code{gmk_free}.
+
+@table @code
+@item gmk_alloc
+@findex gmk_alloc
+Return a pointer to a newly-allocated buffer.  This function will
+always return a valid pointer; if not enough memory is available
+@code{make} will exit.
+
+@item gmk_free
+@findex gmk_free
+Free a buffer returned to you by @code{make}.  Once the
+@code{gmk_free} function returns the string will no longer be valid.
+@end table
+
+@node Loaded Object Example,  , Loaded Object API, Loading Objects
+@subsection Example Loaded Object
+@cindex loaded object example
+@cindex example of loaded objects
+
+Let's suppose we wanted to write a new GNU @code{make} function that
+would create a temporary file and return its name.  We would like our
+function to take a prefix as an argument.  First we can write the
+function in a file @file{mk_temp.c}:
+
+@example
+@group
+#include <stdlib.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include <gnumake.h>
+
+int plugin_is_GPL_compatible;
+
+char *
+gen_tmpfile(const char *nm, int argc, char **argv)
+@{
+  int fd;
+
+  /* Compute the size of the filename and allocate space for it.  */
+  int len = strlen (argv[0]) + 6 + 1;
+  char *buf = gmk_alloc (len);
+
+  strcpy (buf, argv[0]);
+  strcat (buf, "XXXXXX");
+
+  fd = mkstemp(buf);
+  if (fd >= 0)
+    @{
+      /* Don't leak the file descriptor.  */
+      close (fd);
+      return buf;
+    @}
+
+  /* Failure.  */
+  fprintf (stderr, "mkstemp(%s) failed: %s\n", buf, strerror (errno));
+  gmk_free (buf);
+  return NULL;
+@}
+
+int
+mk_temp_gmk_setup ()
+@{
+  /* Register the function with make name "mk-temp".  */
+  gmk_add_function ("mk-temp", gen_tmpfile, 1, 1, 1);
+  return 1;
+@}
+@end group
+@end example
+
+Next, we will write a makefile that can build this shared object, load
+it, and use it:
+
+@example
+@group
+all:
+        @@echo Temporary file: $(mk-temp tmpfile.)
+
+load mk_temp.so
+
+mk_temp.so: mk_temp.c
+        $(CC) -shared -fPIC -o $@ $<
+@end group
+@end example
+
+On MS-Windows, due to peculiarities of how shared objects are
+produced, the compiler needs to scan the @dfn{import library} produced
+when building @code{make}, typically called
+@file{libgnumake-@var{version}.dll.a}, where @var{version} is the
+version of the load object API.  So the recipe to produce a shared
+object will look on Windows like this (assuming the API version is 1):
+
+@example
+@group
+mk_temp.dll: mk_temp.c
+        $(CC) -shared -o $@ $< -lgnumake-1
+@end group
+@end example
+
+Now when you run @code{make} you'll see something like:
+
+@example
+$ make
+cc -shared -fPIC -o mk_temp.so mk_temp.c
+Temporary filename: tmpfile.A7JEwd
+@end example
+
+@node Features, Missing, Extending make, Top
+@chapter Features of GNU @code{make}
+@cindex features of GNU @code{make}
+@cindex portability
+@cindex compatibility
+
+Here is a summary of the features of GNU @code{make}, for comparison
+with and credit to other versions of @code{make}.  We consider the
+features of @code{make} in 4.2 BSD systems as a baseline.  If you are
+concerned with writing portable makefiles, you should not use the
+features of @code{make} listed here, nor the ones in @ref{Missing}.
+
+Many features come from the version of @code{make} in System V.
+
+@itemize @bullet
+@item
+The @code{VPATH} variable and its special meaning.
+@xref{Directory Search, , Searching Directories for Prerequisites}.
+This feature exists in System V @code{make}, but is undocumented.
+It is documented in 4.3 BSD @code{make} (which says it mimics System V's
+@code{VPATH} feature).@refill
+
+@item
+Included makefiles.  @xref{Include, ,Including Other Makefiles}.
+Allowing multiple files to be included with a single directive is a GNU
+extension.
+
+@item
+Variables are read from and communicated via the environment.
+@xref{Environment, ,Variables from the Environment}.
+
+@item
+Options passed through the variable @code{MAKEFLAGS} to recursive
+invocations of @code{make}.
+@xref{Options/Recursion, ,Communicating Options to a Sub-@code{make}}.
+
+@item
+The automatic variable @code{$%} is set to the member name
+in an archive reference.  @xref{Automatic Variables}.
+
+@item
+The automatic variables @code{$@@}, @code{$*}, @code{$<}, @code{$%},
+and @code{$?} have corresponding forms like @code{$(@@F)} and
+@code{$(@@D)}.  We have generalized this to @code{$^} as an obvious
+extension.  @xref{Automatic Variables}.@refill
+
+@item
+Substitution variable references.
+@xref{Reference, ,Basics of Variable References}.
+
+@item
+The command line options @samp{-b} and @samp{-m}, accepted and
+ignored.  In System V @code{make}, these options actually do something.
+
+@item
+Execution of recursive commands to run @code{make} via the variable
+@code{MAKE} even if @samp{-n}, @samp{-q} or @samp{-t} is specified.
+@xref{Recursion, ,Recursive Use of @code{make}}.
+
+@item
+Support for suffix @samp{.a} in suffix rules.  @xref{Archive Suffix
+Rules}.  This feature is obsolete in GNU @code{make}, because the
+general feature of rule chaining (@pxref{Chained Rules, ,Chains of
+Implicit Rules}) allows one pattern rule for installing members in an
+archive (@pxref{Archive Update}) to be sufficient.
+
+@item
+The arrangement of lines and backslash/newline combinations in
+recipes is retained when the recipes are printed, so they appear as
+they do in the makefile, except for the stripping of initial
+whitespace.
+@end itemize
+
+The following features were inspired by various other versions of
+@code{make}.  In some cases it is unclear exactly which versions inspired
+which others.
+
+@itemize @bullet
+@item
+Pattern rules using @samp{%}.
+This has been implemented in several versions of @code{make}.
+We're not sure who invented it first, but it's been spread around a bit.
+@xref{Pattern Rules, ,Defining and Redefining Pattern Rules}.@refill
+
+@item
+Rule chaining and implicit intermediate files.
+This was implemented by Stu Feldman in his version of @code{make}
+for AT&T Eighth Edition Research Unix, and later by Andrew Hume of
+AT&T Bell Labs in his @code{mk} program (where he terms it
+``transitive closure'').  We do not really know if
+we got this from either of them or thought it up ourselves at the
+same time.  @xref{Chained Rules, ,Chains of Implicit Rules}.
+
+@item
+The automatic variable @code{$^} containing a list of all prerequisites
+of the current target.  We did not invent this, but we have no idea who
+did.  @xref{Automatic Variables}.  The automatic variable
+@code{$+} is a simple extension of @code{$^}.
+
+@item
+The ``what if'' flag (@samp{-W} in GNU @code{make}) was (as far as we know)
+invented by Andrew Hume in @code{mk}.
+@xref{Instead of Execution, ,Instead of Executing Recipes}.
+
+@item
+The concept of doing several things at once (parallelism) exists in
+many incarnations of @code{make} and similar programs, though not in the
+System V or BSD implementations.  @xref{Execution, ,Recipe Execution}.
+
+@item
+A number of different build tools that support parallelism also
+support collecting output and displaying as a single block.
+@xref{Parallel Output, ,Output During Parallel Execution}.
+
+@item
+Modified variable references using pattern substitution come from
+SunOS 4.  @xref{Reference, ,Basics of Variable References}.
+This functionality was provided in GNU @code{make} by the
+@code{patsubst} function before the alternate syntax was implemented
+for compatibility with SunOS 4.  It is not altogether clear who
+inspired whom, since GNU @code{make} had @code{patsubst} before SunOS
+4 was released.@refill
+
+@item
+The special significance of @samp{+} characters preceding recipe lines
+(@pxref{Instead of Execution, ,Instead of Executing Recipes}) is
+mandated by @cite{IEEE Standard 1003.2-1992} (POSIX.2).
+
+@item
+The @samp{+=} syntax to append to the value of a variable comes from SunOS
+4 @code{make}.  @xref{Appending, , Appending More Text to Variables}.
+
+@item
+The syntax @w{@samp{@var{archive}(@var{mem1} @var{mem2}@dots{})}} to list
+multiple members in a single archive file comes from SunOS 4 @code{make}.
+@xref{Archive Members}.
+
+@item
+The @code{-include} directive to include makefiles with no error for a
+nonexistent file comes from SunOS 4 @code{make}.  (But note that SunOS 4
+@code{make} does not allow multiple makefiles to be specified in one
+@code{-include} directive.)  The same feature appears with the name
+@code{sinclude} in SGI @code{make} and perhaps others.
+
+@item
+The @code{!=} shell assignment operator exists in many BSD of
+@code{make} and is purposefully implemented here to behave identically
+to those implementations.
+
+@item
+Various build management tools are implemented using scripting
+languages such as Perl or Python and thus provide a natural embedded
+scripting language, similar to GNU @code{make}'s integration of GNU
+Guile.
+@end itemize
+
+The remaining features are inventions new in GNU @code{make}:
+
+@itemize @bullet
+@item
+Use the @samp{-v} or @samp{--version} option to print version and
+copyright information.
+
+@item
+Use the @samp{-h} or @samp{--help} option to summarize the options to
+@code{make}.
+
+@item
+Simply-expanded variables.  @xref{Flavors, ,The Two Flavors of Variables}.
+
+@item
+Pass command line variable assignments automatically through the
+variable @code{MAKE} to recursive @code{make} invocations.
+@xref{Recursion, ,Recursive Use of @code{make}}.
+
+@item
+Use the @samp{-C} or @samp{--directory} command option to change
+directory.  @xref{Options Summary, ,Summary of Options}.
+
+@item
+Make verbatim variable definitions with @code{define}.
+@xref{Multi-Line, ,Defining Multi-Line Variables}.
+
+@item
+Declare phony targets with the special target @code{.PHONY}.
+
+Andrew Hume of AT&T Bell Labs implemented a similar feature with a
+different syntax in his @code{mk} program.  This seems to be a case of
+parallel discovery.  @xref{Phony Targets, ,Phony Targets}.
+
+@item
+Manipulate text by calling functions.
+@xref{Functions, ,Functions for Transforming Text}.
+
+@item
+Use the @samp{-o} or @samp{--old-file}
+option to pretend a file's modification-time is old.
+@xref{Avoiding Compilation, ,Avoiding Recompilation of Some Files}.
+
+@item
+Conditional execution.
+
+This feature has been implemented numerous times in various versions
+of @code{make}; it seems a natural extension derived from the features
+of the C preprocessor and similar macro languages and is not a
+revolutionary concept.  @xref{Conditionals, ,Conditional Parts of Makefiles}.
+
+@item
+Specify a search path for included makefiles.
+@xref{Include, ,Including Other Makefiles}.
+
+@item
+Specify extra makefiles to read with an environment variable.
+@xref{MAKEFILES Variable, ,The Variable @code{MAKEFILES}}.
+
+@item
+Strip leading sequences of @samp{./} from file names, so that
+@file{./@var{file}} and @file{@var{file}} are considered to be the
+same file.@refill
+
+@item
+Use a special search method for library prerequisites written in the
+form @samp{-l@var{name}}.
+@xref{Libraries/Search, ,Directory Search for Link Libraries}.
+
+@item
+Allow suffixes for suffix rules
+(@pxref{Suffix Rules, ,Old-Fashioned Suffix Rules}) to contain any
+characters.  In other versions of @code{make}, they must begin with
+@samp{.} and not contain any @samp{/} characters.
+
+@item
+Keep track of the current level of @code{make} recursion using the
+variable @code{MAKELEVEL}.  @xref{Recursion, ,Recursive Use of @code{make}}.
+
+@item
+Provide any goals given on the command line in the variable
+@code{MAKECMDGOALS}.  @xref{Goals, ,Arguments to Specify the Goals}.
+
+@item
+Specify static pattern rules.  @xref{Static Pattern, ,Static Pattern Rules}.
+
+@item
+Provide selective @code{vpath} search.
+@xref{Directory Search, ,Searching Directories for Prerequisites}.
+
+@item
+Provide computed variable references.
+@xref{Reference, ,Basics of Variable References}.
+
+@item
+Update makefiles.  @xref{Remaking Makefiles, ,How Makefiles Are Remade}.
+System V @code{make} has a very, very limited form of this
+functionality in that it will check out SCCS files for makefiles.
+
+@item
+Various new built-in implicit rules.
+@xref{Catalogue of Rules, ,Catalogue of Built-In Rules}.
+
+@item
+Load dynamic objects which can modify the behavior of @code{make}.
+@xref{Loading Objects, ,Loading Dynamic Objects}.
+@end itemize
+
+@node Missing, Makefile Conventions, Features, Top
+@chapter Incompatibilities and Missing Features
+@cindex incompatibilities
+@cindex missing features
+@cindex features, missing
+
+The @code{make} programs in various other systems support a few features
+that are not implemented in GNU @code{make}.  The POSIX.2 standard
+(@cite{IEEE Standard 1003.2-1992}) which specifies @code{make} does not
+require any of these features.@refill
+
+@itemize @bullet
+@item
+A target of the form @samp{@var{file}((@var{entry}))} stands for a member
+of archive file @var{file}.  The member is chosen, not by name, but by
+being an object file which defines the linker symbol @var{entry}.@refill
+
+This feature was not put into GNU @code{make} because of the
+non-modularity of putting knowledge into @code{make} of the internal
+format of archive file symbol tables.
+@xref{Archive Symbols, ,Updating Archive Symbol Directories}.
+
+@item
+Suffixes (used in suffix rules) that end with the character @samp{~}
+have a special meaning to System V @code{make};
+they refer to the SCCS file that corresponds
+to the file one would get without the @samp{~}.  For example, the
+suffix rule @samp{.c~.o} would make the file @file{@var{n}.o} from
+the SCCS file @file{s.@var{n}.c}.  For complete coverage, a whole
+series of such suffix rules is required.
+@xref{Suffix Rules, ,Old-Fashioned Suffix Rules}.
+
+In GNU @code{make}, this entire series of cases is handled by two
+pattern rules for extraction from SCCS, in combination with the
+general feature of rule chaining.
+@xref{Chained Rules, ,Chains of Implicit Rules}.
+
+@item
+In System V and 4.3 BSD @code{make}, files found by @code{VPATH}
+search (@pxref{Directory Search, ,Searching Directories for
+Prerequisites}) have their names changed inside recipes.  We feel it
+is much cleaner to always use automatic variables and thus make this
+feature obsolete.@refill
+
+@item
+In some Unix @code{make}s, the automatic variable @code{$*} appearing in
+the prerequisites of a rule has the amazingly strange ``feature'' of
+expanding to the full name of the @emph{target of that rule}.  We cannot
+imagine what went on in the minds of Unix @code{make} developers to do
+this; it is utterly inconsistent with the normal definition of @code{$*}.
+@vindex * @r{(automatic variable), unsupported bizarre usage}
+
+@item
+In some Unix @code{make}s, implicit rule search (@pxref{Implicit
+Rules, ,Using Implicit Rules}) is apparently done for @emph{all}
+targets, not just those without recipes.  This means you can
+do:@refill
+
+@example
+@group
+foo.o:
+        cc -c foo.c
+@end group
+@end example
+
+@noindent
+and Unix @code{make} will intuit that @file{foo.o} depends on
+@file{foo.c}.@refill
+
+We feel that such usage is broken.  The prerequisite properties of
+@code{make} are well-defined (for GNU @code{make}, at least),
+and doing such a thing simply does not fit the model.@refill
+
+@item
+GNU @code{make} does not include any built-in implicit rules for
+compiling or preprocessing EFL programs.  If we hear of anyone who is
+using EFL, we will gladly add them.
+
+@item
+It appears that in SVR4 @code{make}, a suffix rule can be specified
+with no recipe, and it is treated as if it had an empty recipe
+(@pxref{Empty Recipes}).  For example:
+
+@example
+.c.a:
+@end example
+
+@noindent
+will override the built-in @file{.c.a} suffix rule.
+
+We feel that it is cleaner for a rule without a recipe to always simply
+add to the prerequisite list for the target.  The above example can be
+easily rewritten to get the desired behavior in GNU @code{make}:
+
+@example
+.c.a: ;
+@end example
+
+@item
+Some versions of @code{make} invoke the shell with the @samp{-e} flag,
+except under @samp{-k} (@pxref{Testing, ,Testing the Compilation of a
+Program}).  The @samp{-e} flag tells the shell to exit as soon as any
+program it runs returns a nonzero status.  We feel it is cleaner to
+write each line of the recipe to stand on its own and not require this
+special treatment.
+@end itemize
+
+@comment The makefile standards are in a separate file that is also
+@comment included by standards.texi.
+@include make-stds.texi
+
+@node Quick Reference, Error Messages, Makefile Conventions, Top
+@appendix Quick Reference
+
+This appendix summarizes the directives, text manipulation functions,
+and special variables which GNU @code{make} understands.
+@xref{Special Targets}, @ref{Catalogue of Rules, ,Catalogue of Built-In Rules},
+and @ref{Options Summary, ,Summary of Options},
+for other summaries.
+
+Here is a summary of the directives GNU @code{make} recognizes:
+
+@table @code
+@item define @var{variable}
+@itemx define @var{variable} =
+@itemx define @var{variable} :=
+@itemx define @var{variable} ::=
+@itemx define @var{variable} +=
+@itemx define @var{variable} ?=
+@itemx endef
+Define multi-line variables.@*
+@xref{Multi-Line}.
+
+@item undefine @var{variable}
+Undefining variables.@*
+@xref{Undefine Directive}.
+
+@item ifdef @var{variable}
+@itemx ifndef @var{variable}
+@itemx ifeq (@var{a},@var{b})
+@itemx ifeq "@var{a}" "@var{b}"
+@itemx ifeq '@var{a}' '@var{b}'
+@itemx ifneq (@var{a},@var{b})
+@itemx ifneq "@var{a}" "@var{b}"
+@itemx ifneq '@var{a}' '@var{b}'
+@itemx else
+@itemx endif
+Conditionally evaluate part of the makefile.@*
+@xref{Conditionals}.
+
+@item include @var{file}
+@itemx -include @var{file}
+@itemx sinclude @var{file}
+Include another makefile.@*
+@xref{Include, ,Including Other Makefiles}.
+
+@item override @var{variable-assignment}
+Define a variable, overriding any previous definition, even one from
+the command line.@*
+@xref{Override Directive, ,The @code{override} Directive}.
+
+@item export
+Tell @code{make} to export all variables to child processes by default.@*
+@xref{Variables/Recursion, , Communicating Variables to a Sub-@code{make}}.
+
+@item export @var{variable}
+@itemx export @var{variable-assignment}
+@itemx unexport @var{variable}
+Tell @code{make} whether or not to export a particular variable to child
+processes.@*
+@xref{Variables/Recursion, , Communicating Variables to a Sub-@code{make}}.
+
+@item private @var{variable-assignment}
+Do not allow this variable assignment to be inherited by prerequisites.@*
+@xref{Suppressing Inheritance}.
+
+@item vpath @var{pattern} @var{path}
+Specify a search path for files matching a @samp{%} pattern.@*
+@xref{Selective Search, , The @code{vpath} Directive}.
+
+@item vpath @var{pattern}
+Remove all search paths previously specified for @var{pattern}.
+
+@item vpath
+Remove all search paths previously specified in any @code{vpath}
+directive.
+@end table
+
+Here is a summary of the built-in functions (@pxref{Functions}):
+
+@table @code
+@item $(subst @var{from},@var{to},@var{text})
+Replace @var{from} with @var{to} in @var{text}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(patsubst @var{pattern},@var{replacement},@var{text})
+Replace words matching @var{pattern} with @var{replacement} in @var{text}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(strip @var{string})
+Remove excess whitespace characters from @var{string}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(findstring @var{find},@var{text})
+Locate @var{find} in @var{text}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(filter @var{pattern}@dots{},@var{text})
+Select words in @var{text} that match one of the @var{pattern} words.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(filter-out @var{pattern}@dots{},@var{text})
+Select words in @var{text} that @emph{do not} match any of the @var{pattern} words.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(sort @var{list})
+Sort the words in @var{list} lexicographically, removing duplicates.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(word @var{n},@var{text})
+Extract the @var{n}th word (one-origin) of @var{text}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(words @var{text})
+Count the number of words in @var{text}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(wordlist @var{s},@var{e},@var{text})
+Returns the list of words in @var{text} from @var{s} to @var{e}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(firstword @var{names}@dots{})
+Extract the first word of @var{names}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(lastword @var{names}@dots{})
+Extract the last word of @var{names}.@*
+@xref{Text Functions, , Functions for String Substitution and Analysis}.
+
+@item $(dir @var{names}@dots{})
+Extract the directory part of each file name.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(notdir @var{names}@dots{})
+Extract the non-directory part of each file name.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(suffix @var{names}@dots{})
+Extract the suffix (the last @samp{.} and following characters) of each file name.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(basename @var{names}@dots{})
+Extract the base name (name without suffix) of each file name.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(addsuffix @var{suffix},@var{names}@dots{})
+Append @var{suffix} to each word in @var{names}.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(addprefix @var{prefix},@var{names}@dots{})
+Prepend @var{prefix} to each word in @var{names}.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(join @var{list1},@var{list2})
+Join two parallel lists of words.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(wildcard @var{pattern}@dots{})
+Find file names matching a shell file name pattern (@emph{not} a
+@samp{%} pattern).@*
+@xref{Wildcard Function, ,The Function @code{wildcard}}.
+
+@item $(realpath @var{names}@dots{})
+For each file name in @var{names}, expand to an absolute name that
+does not contain any @code{.}, @code{..}, nor symlinks.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(abspath @var{names}@dots{})
+For each file name in @var{names}, expand to an absolute name that
+does not contain any @code{.} or @code{..} components, but preserves
+symlinks.@*
+@xref{File Name Functions, ,Functions for File Names}.
+
+@item $(error @var{text}@dots{})
+When this function is evaluated, @code{make} generates a fatal error
+with the message @var{text}.@*
+@xref{Make Control Functions, ,Functions That Control Make}.
+
+@item $(warning @var{text}@dots{})
+When this function is evaluated, @code{make} generates a warning with
+the message @var{text}.@*
+@xref{Make Control Functions, ,Functions That Control Make}.
+
+@item $(shell @var{command})
+Execute a shell command and return its output.@*
+@xref{Shell Function, , The @code{shell} Function}.
+
+@item $(origin @var{variable})
+Return a string describing how the @code{make} variable @var{variable} was
+defined.@*
+@xref{Origin Function, , The @code{origin} Function}.
+
+@item $(flavor @var{variable})
+Return a string describing the flavor of the @code{make} variable
+@var{variable}.@*
+@xref{Flavor Function, , The @code{flavor} Function}.
+
+@item $(foreach @var{var},@var{words},@var{text})
+Evaluate @var{text} with @var{var} bound to each word in @var{words},
+and concatenate the results.@*
+@xref{Foreach Function, ,The @code{foreach} Function}.
+
+@item $(if @var{condition},@var{then-part}[,@var{else-part}])
+Evaluate the condition @var{condition}; if it's non-empty substitute
+the expansion of the @var{then-part} otherwise substitute the
+expansion of the @var{else-part}.@*
+@xref{Conditional Functions, ,Functions for Conditionals}.
+
+@item $(or @var{condition1}[,@var{condition2}[,@var{condition3}@dots{}]])
+Evaluate each condition @var{conditionN} one at a time; substitute the
+first non-empty expansion.  If all expansions are empty, substitute
+the empty string.@*
+@xref{Conditional Functions, ,Functions for Conditionals}.
+
+@item $(and @var{condition1}[,@var{condition2}[,@var{condition3}@dots{}]])
+Evaluate each condition @var{conditionN} one at a time; if any
+expansion results in the empty string substitute the empty string.  If
+all expansions result in a non-empty string, substitute the expansion
+of the last @var{condition}.@*
+@xref{Conditional Functions, ,Functions for Conditionals}.
+
+@item $(call @var{var},@var{param},@dots{})
+Evaluate the variable @var{var} replacing any references to @code{$(1)},
+@code{$(2)} with the first, second, etc.@: @var{param} values.@*
+@xref{Call Function, ,The @code{call} Function}.
+
+@item $(eval @var{text})
+Evaluate @var{text} then read the results as makefile commands.
+Expands to the empty string.@*
+@xref{Eval Function, ,The @code{eval} Function}.
+
+@item $(file @var{op} @var{filename},@var{text})
+Expand the arguments, then open the file @var{filename} using mode
+@var{op} and write @var{text} to that file.@*
+@xref{File Function, ,The @code{file} Function}.
+
+@item $(value @var{var})
+Evaluates to the contents of the variable @var{var}, with no expansion
+performed on it.@*
+@xref{Value Function, ,The @code{value} Function}.
+@end table
+
+Here is a summary of the automatic variables.
+@xref{Automatic Variables},
+for full information.
+
+@table @code
+@item $@@
+The file name of the target.
+
+@item $%
+The target member name, when the target is an archive member.
+
+@item $<
+The name of the first prerequisite.
+
+@item $?
+The names of all the prerequisites that are
+newer than the target, with spaces between them.
+For prerequisites which are archive members, only
+the named member is used (@pxref{Archives}).
+
+@item $^
+@itemx $+
+The names of all the prerequisites, with spaces between them.  For
+prerequisites which are archive members, only the named member is used
+(@pxref{Archives}).  The value of @code{$^} omits duplicate
+prerequisites, while @code{$+} retains them and preserves their order.
+
+@item $*
+The stem with which an implicit rule matches
+(@pxref{Pattern Match, ,How Patterns Match}).
+
+@item $(@@D)
+@itemx $(@@F)
+The directory part and the file-within-directory part of @code{$@@}.
+
+@item $(*D)
+@itemx $(*F)
+The directory part and the file-within-directory part of @code{$*}.
+
+@item $(%D)
+@itemx $(%F)
+The directory part and the file-within-directory part of @code{$%}.
+
+@item $(<D)
+@itemx $(<F)
+The directory part and the file-within-directory part of @code{$<}.
+
+@item $(^D)
+@itemx $(^F)
+The directory part and the file-within-directory part of @code{$^}.
+
+@item $(+D)
+@itemx $(+F)
+The directory part and the file-within-directory part of @code{$+}.
+
+@item $(?D)
+@itemx $(?F)
+The directory part and the file-within-directory part of @code{$?}.
+@end table
+
+These variables are used specially by GNU @code{make}:
+
+@table @code
+@item MAKEFILES
+
+Makefiles to be read on every invocation of @code{make}.@*
+@xref{MAKEFILES Variable, ,The Variable @code{MAKEFILES}}.
+
+@item VPATH
+
+Directory search path for files not found in the current directory.@*
+@xref{General Search, , @code{VPATH} Search Path for All Prerequisites}.
+
+@item SHELL
+
+The name of the system default command interpreter, usually @file{/bin/sh}.
+You can set @code{SHELL} in the makefile to change the shell used to run
+recipes.  @xref{Execution, ,Recipe Execution}.  The @code{SHELL}
+variable is handled specially when importing from and exporting to the
+environment.  @xref{Choosing the Shell}.
+
+@item MAKESHELL
+
+On MS-DOS only, the name of the command interpreter that is to be used
+by @code{make}.  This value takes precedence over the value of
+@code{SHELL}.  @xref{Execution, ,MAKESHELL variable}.
+
+@item MAKE
+
+The name with which @code{make} was invoked.  Using this variable in
+recipes has special meaning.  @xref{MAKE Variable, ,How the
+@code{MAKE} Variable Works}.
+
+@item MAKE_VERSION
+
+The built-in variable @samp{MAKE_VERSION} expands to the version
+number of the GNU @code{make} program.
+@vindex MAKE_VERSION
+
+@item MAKE_HOST
+
+The built-in variable @samp{MAKE_HOST} expands to a string
+representing the host that GNU @code{make} was built to run on.
+@vindex MAKE_HOST
+
+@item MAKELEVEL
+
+The number of levels of recursion (sub-@code{make}s).@*
+@xref{Variables/Recursion}.
+
+@item MAKEFLAGS
+
+The flags given to @code{make}.  You can set this in the environment or
+a makefile to set flags.@*
+@xref{Options/Recursion, ,Communicating Options to a Sub-@code{make}}.
+
+It is @emph{never} appropriate to use @code{MAKEFLAGS} directly in a
+recipe line: its contents may not be quoted correctly for use in the
+shell.  Always allow recursive @code{make}'s to obtain these values
+through the environment from its parent.
+
+@item GNUMAKEFLAGS
+
+Other flags parsed by @code{make}.  You can set this in the environment or
+a makefile to set @code{make} command-line flags.  GNU @code{make}
+never sets this variable itself.  This variable is only needed if
+you'd like to set GNU @code{make}-specific flags in a POSIX-compliant
+makefile.  This variable will be seen by GNU @code{make} and ignored
+by other @code{make} implementations.  It's not needed if you only use
+GNU @code{make}; just use @code{MAKEFLAGS} directly.
+@xref{Options/Recursion, ,Communicating Options to a Sub-@code{make}}.
+
+@item MAKECMDGOALS
+
+The targets given to @code{make} on the command line.  Setting this
+variable has no effect on the operation of @code{make}.@*
+@xref{Goals, ,Arguments to Specify the Goals}.
+
+@item CURDIR
+
+Set to the pathname of the current working directory (after all
+@code{-C} options are processed, if any).  Setting this variable has no
+effect on the operation of @code{make}.@*
+@xref{Recursion, ,Recursive Use of @code{make}}.
+
+@item SUFFIXES
+
+The default list of suffixes before @code{make} reads any makefiles.
+
+@item .LIBPATTERNS
+Defines the naming of the libraries @code{make} searches for, and their
+order.@*
+@xref{Libraries/Search, ,Directory Search for Link Libraries}.
+@end table
+
+@node Error Messages, Complex Makefile, Quick Reference, Top
+@comment  node-name,  next,  previous,  up
+@appendix Errors Generated by Make
+
+Here is a list of the more common errors you might see generated by
+@code{make}, and some information about what they mean and how to fix
+them.
+
+Sometimes @code{make} errors are not fatal, especially in the presence
+of a @code{-} prefix on a recipe line, or the @code{-k} command line
+option.  Errors that are fatal are prefixed with the string
+@code{***}.
+
+Error messages are all either prefixed with the name of the program
+(usually @samp{make}), or, if the error is found in a makefile, the name
+of the file and line number containing the problem.
+
+In the table below, these common prefixes are left off.
+
+@table @samp
+
+@item [@var{foo}] Error @var{NN}
+@itemx [@var{foo}] @var{signal description}
+These errors are not really @code{make} errors at all.  They mean that a
+program that @code{make} invoked as part of a recipe returned a
+non-0 error code (@samp{Error @var{NN}}), which @code{make} interprets
+as failure, or it exited in some other abnormal fashion (with a
+signal of some type).  @xref{Errors, ,Errors in Recipes}.
+
+If no @code{***} is attached to the message, then the sub-process failed
+but the rule in the makefile was prefixed with the @code{-} special
+character, so @code{make} ignored the error.
+
+@item missing separator.  Stop.
+@itemx missing separator (did you mean TAB instead of 8 spaces?).  Stop.
+This means that @code{make} could not understand much of anything
+about the makefile line it just read.  GNU @code{make} looks for
+various separators (@code{:}, @code{=}, recipe prefix characters,
+etc.) to indicate what kind of line it's parsing.  This message means
+it couldn't find a valid one.
+
+One of the most common reasons for this message is that you (or
+perhaps your oh-so-helpful editor, as is the case with many MS-Windows
+editors) have attempted to indent your recipe lines with spaces
+instead of a tab character.  In this case, @code{make} will use the
+second form of the error above.  Remember that every line in the
+recipe must begin with a tab character (unless you set
+@code{.RECIPEPREFIX}; @pxref{Special Variables}).  Eight spaces do not
+count.  @xref{Rule Syntax}.
+
+@item recipe commences before first target.  Stop.
+@itemx missing rule before recipe.  Stop.
+This means the first thing in the makefile seems to be part of a
+recipe: it begins with a recipe prefix character and doesn't appear to
+be a legal @code{make} directive (such as a variable assignment).
+Recipes must always be associated with a target.
+
+The second form is generated if the line has a semicolon as the first
+non-whitespace character; @code{make} interprets this to mean you left
+out the "target: prerequisite" section of a rule.  @xref{Rule Syntax}.
+
+@item No rule to make target `@var{xxx}'.
+@itemx No rule to make target `@var{xxx}', needed by `@var{yyy}'.
+This means that @code{make} decided it needed to build a target, but
+then couldn't find any instructions in the makefile on how to do that,
+either explicit or implicit (including in the default rules database).
+
+If you want that file to be built, you will need to add a rule to your
+makefile describing how that target can be built.  Other possible
+sources of this problem are typos in the makefile (if that file name is
+wrong) or a corrupted source tree (if that file is not supposed to be
+built, but rather only a prerequisite).
+
+@item No targets specified and no makefile found.  Stop.
+@itemx No targets.  Stop.
+The former means that you didn't provide any targets to be built on the
+command line, and @code{make} couldn't find any makefiles to read in.
+The latter means that some makefile was found, but it didn't contain any
+default goal and none was given on the command line.  GNU @code{make}
+has nothing to do in these situations.
+@xref{Makefile Arguments, ,Arguments to Specify the Makefile}.@refill
+
+@item Makefile `@var{xxx}' was not found.
+@itemx Included makefile `@var{xxx}' was not found.
+A makefile specified on the command line (first form) or included
+(second form) was not found.
+
+@item warning: overriding recipe for target `@var{xxx}'
+@itemx warning: ignoring old recipe for target `@var{xxx}'
+GNU @code{make} allows only one recipe to be specified per target
+(except for double-colon rules).  If you give a recipe for a target
+which already has been defined to have one, this warning is issued and
+the second recipe will overwrite the first.  @xref{Multiple Rules,
+,Multiple Rules for One Target}.
+
+@item Circular @var{xxx} <- @var{yyy} dependency dropped.
+This means that @code{make} detected a loop in the dependency graph:
+after tracing the prerequisite @var{yyy} of target @var{xxx}, and its
+prerequisites, etc., one of them depended on @var{xxx} again.
+
+@item Recursive variable `@var{xxx}' references itself (eventually).  Stop.
+This means you've defined a normal (recursive) @code{make} variable
+@var{xxx} that, when it's expanded, will refer to itself (@var{xxx}).
+This is not allowed; either use simply-expanded variables (@samp{:=}
+or @samp{::=}) or use the append operator (@samp{+=}).  @xref{Using
+Variables, ,How to Use Variables}.
+
+@item Unterminated variable reference.  Stop.
+This means you forgot to provide the proper closing parenthesis
+or brace in your variable or function reference.
+
+@item insufficient arguments to function `@var{xxx}'.  Stop.
+This means you haven't provided the requisite number of arguments for
+this function.  See the documentation of the function for a description
+of its arguments.  @xref{Functions, ,Functions for Transforming Text}.
+
+@item missing target pattern.  Stop.
+@itemx multiple target patterns.  Stop.
+@itemx target pattern contains no `%'.  Stop.
+@itemx mixed implicit and static pattern rules.  Stop.
+These are generated for malformed static pattern rules.  The first
+means there's no pattern in the target section of the rule; the second
+means there are multiple patterns in the target section; the third
+means the target doesn't contain a pattern character (@code{%}); and
+the fourth means that all three parts of the static pattern rule
+contain pattern characters (@code{%})--only the first two parts
+should.  If you see these errors and you aren't trying to create a
+static pattern rule, check the value of any variables in your target
+and prerequisite lists to be sure they do not contain colons.
+@xref{Static Usage, ,Syntax of Static Pattern Rules}.
+
+@item warning: -jN forced in submake: disabling jobserver mode.
+This warning and the next are generated if @code{make} detects error
+conditions related to parallel processing on systems where
+sub-@code{make}s can communicate (@pxref{Options/Recursion,
+,Communicating Options to a Sub-@code{make}}).  This warning is
+generated if a recursive invocation of a @code{make} process is forced
+to have @samp{-j@var{N}} in its argument list (where @var{N} is greater
+than one).  This could happen, for example, if you set the @code{MAKE}
+environment variable to @samp{make -j2}.  In this case, the
+sub-@code{make} doesn't communicate with other @code{make} processes and
+will simply pretend it has two jobs of its own.
+
+@item warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
+In order for @code{make} processes to communicate, the parent will pass
+information to the child.  Since this could result in problems if the
+child process isn't actually a @code{make}, the parent will only do this
+if it thinks the child is a @code{make}.  The parent uses the normal
+algorithms to determine this (@pxref{MAKE Variable, ,How the @code{MAKE}
+Variable Works}).  If the makefile is constructed such that the parent
+doesn't know the child is a @code{make} process, then the child will
+receive only part of the information necessary.  In this case, the child
+will generate this warning message and proceed with its build in a
+sequential manner.
+
+@end table
+
+@node Complex Makefile, GNU Free Documentation License, Error Messages, Top
+@appendix Complex Makefile Example
+
+Here is the makefile for the GNU @code{tar} program.  This is a
+moderately complex makefile.  The first line uses a @code{#!} setting
+to allow the makefile to be executed directly.
+
+Because it is the first target, the default goal is @samp{all}.  An
+interesting feature of this makefile is that @file{testpad.h} is a
+source file automatically created by the @code{testpad} program,
+itself compiled from @file{testpad.c}.
+
+If you type @samp{make} or @samp{make all}, then @code{make} creates
+the @file{tar} executable, the @file{rmt} daemon that provides
+remote tape access, and the @file{tar.info} Info file.
+
+If you type @samp{make install}, then @code{make} not only creates
+@file{tar}, @file{rmt}, and @file{tar.info}, but also installs
+them.
+
+If you type @samp{make clean}, then @code{make} removes the @samp{.o}
+files, and the @file{tar}, @file{rmt}, @file{testpad},
+@file{testpad.h}, and @file{core} files.
+
+If you type @samp{make distclean}, then @code{make} not only removes
+the same files as does @samp{make clean} but also the
+@file{TAGS}, @file{Makefile}, and @file{config.status} files.
+(Although it is not evident, this makefile (and
+@file{config.status}) is generated by the user with the
+@code{configure} program, which is provided in the @code{tar}
+distribution, but is not shown here.)
+
+If you type @samp{make realclean}, then @code{make} removes the same
+files as does @samp{make distclean} and also removes the Info files
+generated from @file{tar.texinfo}.
+
+In addition, there are targets @code{shar} and @code{dist} that create
+distribution kits.
+
+@example
+@group
+#!/usr/bin/make -f
+# Generated automatically from Makefile.in by configure.
+# Un*x Makefile for GNU tar program.
+# Copyright (C) 1991 Free Software Foundation, Inc.
+@end group
+
+@group
+# This program is free software; you can redistribute
+# it and/or modify it under the terms of the GNU
+# General Public License @dots{}
+@dots{}
+@dots{}
+@end group
+
+SHELL = /bin/sh
+
+#### Start of system configuration section. ####
+
+srcdir = .
+
+@group
+# If you use gcc, you should either run the
+# fixincludes script that comes with it or else use
+# gcc with the -traditional option.  Otherwise ioctl
+# calls will be compiled incorrectly on some systems.
+CC = gcc -O
+YACC = bison -y
+INSTALL = /usr/local/bin/install -c
+INSTALLDATA = /usr/local/bin/install -c -m 644
+@end group
+
+# Things you might add to DEFS:
+# -DSTDC_HEADERS        If you have ANSI C headers and
+#                       libraries.
+# -DPOSIX               If you have POSIX.1 headers and
+#                       libraries.
+# -DBSD42               If you have sys/dir.h (unless
+#                       you use -DPOSIX), sys/file.h,
+#                       and st_blocks in `struct stat'.
+# -DUSG                 If you have System V/ANSI C
+#                       string and memory functions
+#                       and headers, sys/sysmacros.h,
+#                       fcntl.h, getcwd, no valloc,
+#                       and ndir.h (unless
+#                       you use -DDIRENT).
+# -DNO_MEMORY_H         If USG or STDC_HEADERS but do not
+#                       include memory.h.
+# -DDIRENT              If USG and you have dirent.h
+#                       instead of ndir.h.
+# -DSIGTYPE=int         If your signal handlers
+#                       return int, not void.
+# -DNO_MTIO             If you lack sys/mtio.h
+#                       (magtape ioctls).
+# -DNO_REMOTE           If you do not have a remote shell
+#                       or rexec.
+# -DUSE_REXEC           To use rexec for remote tape
+#                       operations instead of
+#                       forking rsh or remsh.
+# -DVPRINTF_MISSING     If you lack vprintf function
+#                       (but have _doprnt).
+# -DDOPRNT_MISSING      If you lack _doprnt function.
+#                       Also need to define
+#                       -DVPRINTF_MISSING.
+# -DFTIME_MISSING       If you lack ftime system call.
+# -DSTRSTR_MISSING      If you lack strstr function.
+# -DVALLOC_MISSING      If you lack valloc function.
+# -DMKDIR_MISSING       If you lack mkdir and
+#                       rmdir system calls.
+# -DRENAME_MISSING      If you lack rename system call.
+# -DFTRUNCATE_MISSING   If you lack ftruncate
+#                       system call.
+# -DV7                  On Version 7 Unix (not
+#                       tested in a long time).
+# -DEMUL_OPEN3          If you lack a 3-argument version
+#                       of open, and want to emulate it
+#                       with system calls you do have.
+# -DNO_OPEN3            If you lack the 3-argument open
+#                       and want to disable the tar -k
+#                       option instead of emulating open.
+# -DXENIX               If you have sys/inode.h
+#                       and need it 94 to be included.
+
+DEFS =  -DSIGTYPE=int -DDIRENT -DSTRSTR_MISSING \
+        -DVPRINTF_MISSING -DBSD42
+# Set this to rtapelib.o unless you defined NO_REMOTE,
+# in which case make it empty.
+RTAPELIB = rtapelib.o
+LIBS =
+DEF_AR_FILE = /dev/rmt8
+DEFBLOCKING = 20
+
+@group
+CDEBUG = -g
+CFLAGS = $(CDEBUG) -I. -I$(srcdir) $(DEFS) \
+        -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" \
+        -DDEFBLOCKING=$(DEFBLOCKING)
+LDFLAGS = -g
+@end group
+
+@group
+prefix = /usr/local
+# Prefix for each installed program,
+# normally empty or `g'.
+binprefix =
+
+# The directory to install tar in.
+bindir = $(prefix)/bin
+
+# The directory to install the info files in.
+infodir = $(prefix)/info
+@end group
+
+#### End of system configuration section. ####
+
+@group
+SRCS_C  = tar.c create.c extract.c buffer.c   \
+          getoldopt.c update.c gnu.c mangle.c \
+          version.c list.c names.c diffarch.c \
+          port.c wildmat.c getopt.c getopt1.c \
+          regex.c
+SRCS_Y  = getdate.y
+SRCS    = $(SRCS_C) $(SRCS_Y)
+OBJS    = $(SRCS_C:.c=.o) $(SRCS_Y:.y=.o) $(RTAPELIB)
+@end group
+@group
+AUX =   README COPYING ChangeLog Makefile.in  \
+        makefile.pc configure configure.in \
+        tar.texinfo tar.info* texinfo.tex \
+        tar.h port.h open3.h getopt.h regex.h \
+        rmt.h rmt.c rtapelib.c alloca.c \
+        msd_dir.h msd_dir.c tcexparg.c \
+        level-0 level-1 backup-specs testpad.c
+@end group
+
+.PHONY: all
+all:    tar rmt tar.info
+
+@group
+tar:    $(OBJS)
+        $(CC) $(LDFLAGS) -o $@@ $(OBJS) $(LIBS)
+@end group
+
+@group
+rmt:    rmt.c
+        $(CC) $(CFLAGS) $(LDFLAGS) -o $@@ rmt.c
+@end group
+
+@group
+tar.info: tar.texinfo
+        makeinfo tar.texinfo
+@end group
+
+@group
+.PHONY: install
+install: all
+        $(INSTALL) tar $(bindir)/$(binprefix)tar
+        -test ! -f rmt || $(INSTALL) rmt /etc/rmt
+        $(INSTALLDATA) $(srcdir)/tar.info* $(infodir)
+@end group
+
+@group
+$(OBJS): tar.h port.h testpad.h
+regex.o buffer.o tar.o: regex.h
+# getdate.y has 8 shift/reduce conflicts.
+@end group
+
+@group
+testpad.h: testpad
+        ./testpad
+@end group
+
+@group
+testpad: testpad.o
+        $(CC) -o $@@ testpad.o
+@end group
+
+@group
+TAGS:   $(SRCS)
+        etags $(SRCS)
+@end group
+
+@group
+.PHONY: clean
+clean:
+        rm -f *.o tar rmt testpad testpad.h core
+@end group
+
+@group
+.PHONY: distclean
+distclean: clean
+        rm -f TAGS Makefile config.status
+@end group
+
+@group
+.PHONY: realclean
+realclean: distclean
+        rm -f tar.info*
+@end group
+
+@group
+.PHONY: shar
+shar: $(SRCS) $(AUX)
+        shar $(SRCS) $(AUX) | compress \
+          > tar-`sed -e '/version_string/!d' \
+                     -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
+                     -e q
+                     version.c`.shar.Z
+@end group
+
+@group
+.PHONY: dist
+dist: $(SRCS) $(AUX)
+        echo tar-`sed \
+             -e '/version_string/!d' \
+             -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
+             -e q
+             version.c` > .fname
+        -rm -rf `cat .fname`
+        mkdir `cat .fname`
+        ln $(SRCS) $(AUX) `cat .fname`
+        tar chZf `cat .fname`.tar.Z `cat .fname`
+        -rm -rf `cat .fname` .fname
+@end group
+
+@group
+tar.zoo: $(SRCS) $(AUX)
+        -rm -rf tmp.dir
+        -mkdir tmp.dir
+        -rm tar.zoo
+        for X in $(SRCS) $(AUX) ; do \
+            echo $$X ; \
+            sed 's/$$/^M/' $$X \
+            > tmp.dir/$$X ; done
+        cd tmp.dir ; zoo aM ../tar.zoo *
+        -rm -rf tmp.dir
+@end group
+@end example
+
+@node GNU Free Documentation License, Concept Index, Complex Makefile, Top
+@appendixsec GNU Free Documentation License
+@cindex FDL, GNU Free Documentation License
+@include fdl.texi
+
+@node Concept Index, Name Index, GNU Free Documentation License, Top
+@unnumbered Index of Concepts
+
+@printindex cp
+
+@node Name Index,  , Concept Index, Top
+@unnumbered Index of Functions, Variables, & Directives
+
+@printindex fn
+
+@bye
diff --git a/doc/stamp-vti b/doc/stamp-vti
new file mode 100644
index 0000000..c46333e
--- /dev/null
+++ b/doc/stamp-vti
@@ -0,0 +1,4 @@
+@set UPDATED 5 October 2014
+@set UPDATED-MONTH October 2014
+@set EDITION 4.1
+@set VERSION 4.1
diff --git a/doc/version.texi b/doc/version.texi
new file mode 100644
index 0000000..c46333e
--- /dev/null
+++ b/doc/version.texi
@@ -0,0 +1,4 @@
+@set UPDATED 5 October 2014
+@set UPDATED-MONTH October 2014
+@set EDITION 4.1
+@set VERSION 4.1
diff --git a/dosbuild.bat b/dosbuild.bat
new file mode 100644
index 0000000..fac2e88
--- /dev/null
+++ b/dosbuild.bat
@@ -0,0 +1,65 @@
+@echo off

+rem Copyright (C) 1998-2014 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

+

+echo Building Make for MSDOS

+

+rem Echo ON so they will see what is going on.

+@echo on

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g commands.c -o commands.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g output.c -o output.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g job.c -o job.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g dir.c -o dir.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g file.c -o file.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g misc.c -o misc.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g main.c -o main.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g read.c -o read.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g remake.c -o remake.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g rule.c -o rule.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g implicit.c -o implicit.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g default.c -o default.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g variable.c -o variable.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g expand.c -o expand.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g function.c -o function.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g vpath.c -o vpath.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g hash.c -o hash.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g strcache.c -o strcache.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g version.c -o version.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g ar.c -o ar.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g arscan.c -o arscan.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g signame.c -o signame.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g remote-stub.c -o remote-stub.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g getopt.c -o getopt.o

+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g getopt1.c -o getopt1.o

+@cd glob

+@if exist libglob.a del libglob.a

+gcc -I. -c -DHAVE_CONFIG_H -I.. -O2 -g glob.c -o glob.o

+gcc -I. -c -DHAVE_CONFIG_H -I.. -O2 -g fnmatch.c -o fnmatch.o

+ar rv libglob.a glob.o fnmatch.o

+@echo off

+cd ..

+echo commands.o > respf.$$$

+for %%f in (job output dir file misc main read remake rule implicit default variable) do echo %%f.o >> respf.$$$

+for %%f in (expand function vpath hash strcache version ar arscan signame remote-stub getopt getopt1) do echo %%f.o >> respf.$$$

+echo glob/libglob.a >> respf.$$$

+rem gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g guile.c -o guile.o

+rem echo guile.o >> respf.$$$

+@echo Linking...

+@echo on

+gcc -o make.new @respf.$$$

+@if exist make.exe echo Make.exe is now built!

+@if not exist make.exe echo Make.exe build failed...

+@if exist make.exe del respf.$$$

diff --git a/expand.c b/expand.c
new file mode 100644
index 0000000..1c87db1
--- /dev/null
+++ b/expand.c
@@ -0,0 +1,596 @@
+/* Variable expansion functions for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "filedef.h"
+#include "job.h"
+#include "commands.h"
+#include "variable.h"
+#include "rule.h"
+
+/* Initially, any errors reported when expanding strings will be reported
+   against the file where the error appears.  */
+const gmk_floc **expanding_var = &reading_file;
+
+/* The next two describe the variable output buffer.
+   This buffer is used to hold the variable-expansion of a line of the
+   makefile.  It is made bigger with realloc whenever it is too small.
+   variable_buffer_length is the size currently allocated.
+   variable_buffer is the address of the buffer.
+
+   For efficiency, it's guaranteed that the buffer will always have
+   VARIABLE_BUFFER_ZONE extra bytes allocated.  This allows you to add a few
+   extra chars without having to call a function.  Note you should never use
+   these bytes unless you're _sure_ you have room (you know when the buffer
+   length was last checked.  */
+
+#define VARIABLE_BUFFER_ZONE    5
+
+static unsigned int variable_buffer_length;
+char *variable_buffer;
+
+/* Subroutine of variable_expand and friends:
+   The text to add is LENGTH chars starting at STRING to the variable_buffer.
+   The text is added to the buffer at PTR, and the updated pointer into
+   the buffer is returned as the value.  Thus, the value returned by
+   each call to variable_buffer_output should be the first argument to
+   the following call.  */
+
+char *
+variable_buffer_output (char *ptr, const char *string, unsigned int length)
+{
+  register unsigned int newlen = length + (ptr - variable_buffer);
+
+  if ((newlen + VARIABLE_BUFFER_ZONE) > variable_buffer_length)
+    {
+      unsigned int offset = ptr - variable_buffer;
+      variable_buffer_length = (newlen + 100 > 2 * variable_buffer_length
+                                ? newlen + 100
+                                : 2 * variable_buffer_length);
+      variable_buffer = xrealloc (variable_buffer, variable_buffer_length);
+      ptr = variable_buffer + offset;
+    }
+
+  memcpy (ptr, string, length);
+  return ptr + length;
+}
+
+/* Return a pointer to the beginning of the variable buffer.  */
+
+static char *
+initialize_variable_output (void)
+{
+  /* If we don't have a variable output buffer yet, get one.  */
+
+  if (variable_buffer == 0)
+    {
+      variable_buffer_length = 200;
+      variable_buffer = xmalloc (variable_buffer_length);
+      variable_buffer[0] = '\0';
+    }
+
+  return variable_buffer;
+}
+
+/* Recursively expand V.  The returned string is malloc'd.  */
+
+static char *allocated_variable_append (const struct variable *v);
+
+char *
+recursively_expand_for_file (struct variable *v, struct file *file)
+{
+  char *value;
+  const gmk_floc *this_var;
+  const gmk_floc **saved_varp;
+  struct variable_set_list *save = 0;
+  int set_reading = 0;
+
+  /* Don't install a new location if this location is empty.
+     This can happen for command-line variables, builtin variables, etc.  */
+  saved_varp = expanding_var;
+  if (v->fileinfo.filenm)
+    {
+      this_var = &v->fileinfo;
+      expanding_var = &this_var;
+    }
+
+  /* If we have no other file-reading context, use the variable's context. */
+  if (!reading_file)
+    {
+      set_reading = 1;
+      reading_file = &v->fileinfo;
+    }
+
+  if (v->expanding)
+    {
+      if (!v->exp_count)
+        /* Expanding V causes infinite recursion.  Lose.  */
+        OS (fatal, *expanding_var,
+            _("Recursive variable '%s' references itself (eventually)"),
+            v->name);
+      --v->exp_count;
+    }
+
+  if (file)
+    {
+      save = current_variable_set_list;
+      current_variable_set_list = file->variables;
+    }
+
+  v->expanding = 1;
+  if (v->append)
+    value = allocated_variable_append (v);
+  else
+    value = allocated_variable_expand (v->value);
+  v->expanding = 0;
+
+  if (set_reading)
+    reading_file = 0;
+
+  if (file)
+    current_variable_set_list = save;
+
+  expanding_var = saved_varp;
+
+  return value;
+}
+
+/* Expand a simple reference to variable NAME, which is LENGTH chars long.  */
+
+#ifdef __GNUC__
+__inline
+#endif
+static char *
+reference_variable (char *o, const char *name, unsigned int length)
+{
+  struct variable *v;
+  char *value;
+
+  v = lookup_variable (name, length);
+
+  if (v == 0)
+    warn_undefined (name, length);
+
+  /* If there's no variable by that name or it has no value, stop now.  */
+  if (v == 0 || (*v->value == '\0' && !v->append))
+    return o;
+
+  value = (v->recursive ? recursively_expand (v) : v->value);
+
+  o = variable_buffer_output (o, value, strlen (value));
+
+  if (v->recursive)
+    free (value);
+
+  return o;
+}
+
+/* Scan STRING for variable references and expansion-function calls.  Only
+   LENGTH bytes of STRING are actually scanned.  If LENGTH is -1, scan until
+   a null byte is found.
+
+   Write the results to LINE, which must point into 'variable_buffer'.  If
+   LINE is NULL, start at the beginning of the buffer.
+   Return a pointer to LINE, or to the beginning of the buffer if LINE is
+   NULL.
+ */
+char *
+variable_expand_string (char *line, const char *string, long length)
+{
+  struct variable *v;
+  const char *p, *p1;
+  char *save;
+  char *o;
+  unsigned int line_offset;
+
+  if (!line)
+    line = initialize_variable_output ();
+  o = line;
+  line_offset = line - variable_buffer;
+
+  if (length == 0)
+    {
+      variable_buffer_output (o, "", 1);
+      return (variable_buffer);
+    }
+
+  /* We need a copy of STRING: due to eval, it's possible that it will get
+     freed as we process it (it might be the value of a variable that's reset
+     for example).  Also having a nil-terminated string is handy.  */
+  save = length < 0 ? xstrdup (string) : xstrndup (string, length);
+  p = save;
+
+  while (1)
+    {
+      /* Copy all following uninteresting chars all at once to the
+         variable output buffer, and skip them.  Uninteresting chars end
+         at the next $ or the end of the input.  */
+
+      p1 = strchr (p, '$');
+
+      o = variable_buffer_output (o, p, p1 != 0 ? (unsigned int)(p1 - p) : strlen (p) + 1);
+
+      if (p1 == 0)
+        break;
+      p = p1 + 1;
+
+      /* Dispatch on the char that follows the $.  */
+
+      switch (*p)
+        {
+        case '$':
+          /* $$ seen means output one $ to the variable output buffer.  */
+          o = variable_buffer_output (o, p, 1);
+          break;
+
+        case '(':
+        case '{':
+          /* $(...) or ${...} is the general case of substitution.  */
+          {
+            char openparen = *p;
+            char closeparen = (openparen == '(') ? ')' : '}';
+            const char *begp;
+            const char *beg = p + 1;
+            char *op;
+            char *abeg = NULL;
+            const char *end, *colon;
+
+            op = o;
+            begp = p;
+            if (handle_function (&op, &begp))
+              {
+                o = op;
+                p = begp;
+                break;
+              }
+
+            /* Is there a variable reference inside the parens or braces?
+               If so, expand it before expanding the entire reference.  */
+
+            end = strchr (beg, closeparen);
+            if (end == 0)
+              /* Unterminated variable reference.  */
+              O (fatal, *expanding_var, _("unterminated variable reference"));
+            p1 = lindex (beg, end, '$');
+            if (p1 != 0)
+              {
+                /* BEG now points past the opening paren or brace.
+                   Count parens or braces until it is matched.  */
+                int count = 0;
+                for (p = beg; *p != '\0'; ++p)
+                  {
+                    if (*p == openparen)
+                      ++count;
+                    else if (*p == closeparen && --count < 0)
+                      break;
+                  }
+                /* If COUNT is >= 0, there were unmatched opening parens
+                   or braces, so we go to the simple case of a variable name
+                   such as '$($(a)'.  */
+                if (count < 0)
+                  {
+                    abeg = expand_argument (beg, p); /* Expand the name.  */
+                    beg = abeg;
+                    end = strchr (beg, '\0');
+                  }
+              }
+            else
+              /* Advance P to the end of this reference.  After we are
+                 finished expanding this one, P will be incremented to
+                 continue the scan.  */
+              p = end;
+
+            /* This is not a reference to a built-in function and
+               any variable references inside are now expanded.
+               Is the resultant text a substitution reference?  */
+
+            colon = lindex (beg, end, ':');
+            if (colon)
+              {
+                /* This looks like a substitution reference: $(FOO:A=B).  */
+                const char *subst_beg = colon + 1;
+                const char *subst_end = lindex (subst_beg, end, '=');
+                if (subst_end == 0)
+                  /* There is no = in sight.  Punt on the substitution
+                     reference and treat this as a variable name containing
+                     a colon, in the code below.  */
+                  colon = 0;
+                else
+                  {
+                    const char *replace_beg = subst_end + 1;
+                    const char *replace_end = end;
+
+                    /* Extract the variable name before the colon
+                       and look up that variable.  */
+                    v = lookup_variable (beg, colon - beg);
+                    if (v == 0)
+                      warn_undefined (beg, colon - beg);
+
+                    /* If the variable is not empty, perform the
+                       substitution.  */
+                    if (v != 0 && *v->value != '\0')
+                      {
+                        char *pattern, *replace, *ppercent, *rpercent;
+                        char *value = (v->recursive
+                                       ? recursively_expand (v)
+                                       : v->value);
+
+                        /* Copy the pattern and the replacement.  Add in an
+                           extra % at the beginning to use in case there
+                           isn't one in the pattern.  */
+                        pattern = alloca (subst_end - subst_beg + 2);
+                        *(pattern++) = '%';
+                        memcpy (pattern, subst_beg, subst_end - subst_beg);
+                        pattern[subst_end - subst_beg] = '\0';
+
+                        replace = alloca (replace_end - replace_beg + 2);
+                        *(replace++) = '%';
+                        memcpy (replace, replace_beg,
+                               replace_end - replace_beg);
+                        replace[replace_end - replace_beg] = '\0';
+
+                        /* Look for %.  Set the percent pointers properly
+                           based on whether we find one or not.  */
+                        ppercent = find_percent (pattern);
+                        if (ppercent)
+                          {
+                            ++ppercent;
+                            rpercent = find_percent (replace);
+                            if (rpercent)
+                              ++rpercent;
+                          }
+                        else
+                          {
+                            ppercent = pattern;
+                            rpercent = replace;
+                            --pattern;
+                            --replace;
+                          }
+
+                        o = patsubst_expand_pat (o, value, pattern, replace,
+                                                 ppercent, rpercent);
+
+                        if (v->recursive)
+                          free (value);
+                      }
+                  }
+              }
+
+            if (colon == 0)
+              /* This is an ordinary variable reference.
+                 Look up the value of the variable.  */
+                o = reference_variable (o, beg, end - beg);
+
+            free (abeg);
+          }
+          break;
+
+        case '\0':
+          break;
+
+        default:
+          if (isblank ((unsigned char)p[-1]))
+            break;
+
+          /* A $ followed by a random char is a variable reference:
+             $a is equivalent to $(a).  */
+          o = reference_variable (o, p, 1);
+
+          break;
+        }
+
+      if (*p == '\0')
+        break;
+
+      ++p;
+    }
+
+  free (save);
+
+  variable_buffer_output (o, "", 1);
+  return (variable_buffer + line_offset);
+}
+
+/* Scan LINE for variable references and expansion-function calls.
+   Build in 'variable_buffer' the result of expanding the references and calls.
+   Return the address of the resulting string, which is null-terminated
+   and is valid only until the next time this function is called.  */
+
+char *
+variable_expand (const char *line)
+{
+  return variable_expand_string (NULL, line, (long)-1);
+}
+
+/* Expand an argument for an expansion function.
+   The text starting at STR and ending at END is variable-expanded
+   into a null-terminated string that is returned as the value.
+   This is done without clobbering 'variable_buffer' or the current
+   variable-expansion that is in progress.  */
+
+char *
+expand_argument (const char *str, const char *end)
+{
+  char *tmp, *alloc = NULL;
+  char *r;
+
+  if (str == end)
+    return xstrdup ("");
+
+  if (!end || *end == '\0')
+    return allocated_variable_expand (str);
+
+  if (end - str + 1 > 1000)
+    tmp = alloc = xmalloc (end - str + 1);
+  else
+    tmp = alloca (end - str + 1);
+
+  memcpy (tmp, str, end - str);
+  tmp[end - str] = '\0';
+
+  r = allocated_variable_expand (tmp);
+
+  free (alloc);
+
+  return r;
+}
+
+/* Expand LINE for FILE.  Error messages refer to the file and line where
+   FILE's commands were found.  Expansion uses FILE's variable set list.  */
+
+char *
+variable_expand_for_file (const char *line, struct file *file)
+{
+  char *result;
+  struct variable_set_list *savev;
+  const gmk_floc *savef;
+
+  if (file == 0)
+    return variable_expand (line);
+
+  savev = current_variable_set_list;
+  current_variable_set_list = file->variables;
+
+  savef = reading_file;
+  if (file->cmds && file->cmds->fileinfo.filenm)
+    reading_file = &file->cmds->fileinfo;
+  else
+    reading_file = 0;
+
+  result = variable_expand (line);
+
+  current_variable_set_list = savev;
+  reading_file = savef;
+
+  return result;
+}
+
+/* Like allocated_variable_expand, but for += target-specific variables.
+   First recursively construct the variable value from its appended parts in
+   any upper variable sets.  Then expand the resulting value.  */
+
+static char *
+variable_append (const char *name, unsigned int length,
+                 const struct variable_set_list *set, int local)
+{
+  const struct variable *v;
+  char *buf = 0;
+  /* If this set is local and the next is not a parent, then next is local.  */
+  int nextlocal = local && set->next_is_parent == 0;
+
+  /* If there's nothing left to check, return the empty buffer.  */
+  if (!set)
+    return initialize_variable_output ();
+
+  /* Try to find the variable in this variable set.  */
+  v = lookup_variable_in_set (name, length, set->set);
+
+  /* If there isn't one, or this one is private, try the set above us.  */
+  if (!v || (!local && v->private_var))
+    return variable_append (name, length, set->next, nextlocal);
+
+  /* If this variable type is append, first get any upper values.
+     If not, initialize the buffer.  */
+  if (v->append)
+    buf = variable_append (name, length, set->next, nextlocal);
+  else
+    buf = initialize_variable_output ();
+
+  /* Append this value to the buffer, and return it.
+     If we already have a value, first add a space.  */
+  if (buf > variable_buffer)
+    buf = variable_buffer_output (buf, " ", 1);
+
+  /* Either expand it or copy it, depending.  */
+  if (! v->recursive)
+    return variable_buffer_output (buf, v->value, strlen (v->value));
+
+  buf = variable_expand_string (buf, v->value, strlen (v->value));
+  return (buf + strlen (buf));
+}
+
+
+static char *
+allocated_variable_append (const struct variable *v)
+{
+  char *val;
+
+  /* Construct the appended variable value.  */
+
+  char *obuf = variable_buffer;
+  unsigned int olen = variable_buffer_length;
+
+  variable_buffer = 0;
+
+  val = variable_append (v->name, strlen (v->name),
+                         current_variable_set_list, 1);
+  variable_buffer_output (val, "", 1);
+  val = variable_buffer;
+
+  variable_buffer = obuf;
+  variable_buffer_length = olen;
+
+  return val;
+}
+
+/* Like variable_expand_for_file, but the returned string is malloc'd.
+   This function is called a lot.  It wants to be efficient.  */
+
+char *
+allocated_variable_expand_for_file (const char *line, struct file *file)
+{
+  char *value;
+
+  char *obuf = variable_buffer;
+  unsigned int olen = variable_buffer_length;
+
+  variable_buffer = 0;
+
+  value = variable_expand_for_file (line, file);
+
+  variable_buffer = obuf;
+  variable_buffer_length = olen;
+
+  return value;
+}
+
+/* Install a new variable_buffer context, returning the current one for
+   safe-keeping.  */
+
+void
+install_variable_buffer (char **bufp, unsigned int *lenp)
+{
+  *bufp = variable_buffer;
+  *lenp = variable_buffer_length;
+
+  variable_buffer = 0;
+  initialize_variable_output ();
+}
+
+/* Restore a previously-saved variable_buffer setting (free the current one).
+ */
+
+void
+restore_variable_buffer (char *buf, unsigned int len)
+{
+  free (variable_buffer);
+
+  variable_buffer = buf;
+  variable_buffer_length = len;
+}
diff --git a/file.c b/file.c
new file mode 100644
index 0000000..e1a8e80
--- /dev/null
+++ b/file.c
@@ -0,0 +1,1141 @@
+/* Target file management for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "filedef.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+#include "variable.h"
+#include "debug.h"
+#include "hash.h"
+
+
+/* Remember whether snap_deps has been invoked: we need this to be sure we
+   don't add new rules (via $(eval ...)) afterwards.  In the future it would
+   be nice to support this, but it means we'd need to re-run snap_deps() or
+   at least its functionality... it might mean changing snap_deps() to be run
+   per-file, so we can invoke it after the eval... or remembering which files
+   in the hash have been snapped (a new boolean flag?) and having snap_deps()
+   only work on files which have not yet been snapped. */
+int snapped_deps = 0;
+
+/* Hash table of files the makefile knows how to make.  */
+
+static unsigned long
+file_hash_1 (const void *key)
+{
+  return_ISTRING_HASH_1 (((struct file const *) key)->hname);
+}
+
+static unsigned long
+file_hash_2 (const void *key)
+{
+  return_ISTRING_HASH_2 (((struct file const *) key)->hname);
+}
+
+static int
+file_hash_cmp (const void *x, const void *y)
+{
+  return_ISTRING_COMPARE (((struct file const *) x)->hname,
+                          ((struct file const *) y)->hname);
+}
+
+#ifndef FILE_BUCKETS
+#define FILE_BUCKETS    1007
+#endif
+static struct hash_table files;
+
+/* Whether or not .SECONDARY with no prerequisites was given.  */
+static int all_secondary = 0;
+
+/* Access the hash table of all file records.
+   lookup_file  given a name, return the struct file * for that name,
+                or nil if there is none.
+*/
+
+struct file *
+lookup_file (const char *name)
+{
+  struct file *f;
+  struct file file_key;
+#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
+  char *lname;
+#endif
+
+  assert (*name != '\0');
+
+  /* This is also done in parse_file_seq, so this is redundant
+     for names read from makefiles.  It is here for names passed
+     on the command line.  */
+#ifdef VMS
+# ifndef WANT_CASE_SENSITIVE_TARGETS
+  if (*name != '.')
+    {
+      const char *n;
+      char *ln;
+      lname = xstrdup (name);
+      for (n = name, ln = lname; *n != '\0'; ++n, ++ln)
+        *ln = isupper ((unsigned char)*n) ? tolower ((unsigned char)*n) : *n;
+      *ln = '\0';
+      name = lname;
+    }
+# endif
+
+  while (name[0] == '[' && name[1] == ']' && name[2] != '\0')
+      name += 2;
+#endif
+  while (name[0] == '.'
+#ifdef HAVE_DOS_PATHS
+         && (name[1] == '/' || name[1] == '\\')
+#else
+         && name[1] == '/'
+#endif
+         && name[2] != '\0')
+    {
+      name += 2;
+      while (*name == '/'
+#ifdef HAVE_DOS_PATHS
+             || *name == '\\'
+#endif
+             )
+        /* Skip following slashes: ".//foo" is "foo", not "/foo".  */
+        ++name;
+    }
+
+  if (*name == '\0')
+    /* It was all slashes after a dot.  */
+#if defined(VMS)
+    name = "[]";
+#elif defined(_AMIGA)
+    name = "";
+#else
+    name = "./";
+#endif
+
+  file_key.hname = name;
+  f = hash_find_item (&files, &file_key);
+#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
+  if (*name != '.')
+    free (lname);
+#endif
+
+  return f;
+}
+
+/* Look up a file record for file NAME and return it.
+   Create a new record if one doesn't exist.  NAME will be stored in the
+   new record so it should be constant or in the strcache etc.
+ */
+
+struct file *
+enter_file (const char *name)
+{
+  struct file *f;
+  struct file *new;
+  struct file **file_slot;
+  struct file file_key;
+
+  assert (*name != '\0');
+  assert (! verify_flag || strcache_iscached (name));
+
+#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
+  if (*name != '.')
+    {
+      const char *n;
+      char *lname, *ln;
+      lname = xstrdup (name);
+      for (n = name, ln = lname; *n != '\0'; ++n, ++ln)
+        if (isupper ((unsigned char)*n))
+          *ln = tolower ((unsigned char)*n);
+        else
+          *ln = *n;
+
+      *ln = '\0';
+      name = strcache_add (lname);
+      free (lname);
+    }
+#endif
+
+  file_key.hname = name;
+  file_slot = (struct file **) hash_find_slot (&files, &file_key);
+  f = *file_slot;
+  if (! HASH_VACANT (f) && !f->double_colon)
+    {
+      f->builtin = 0;
+      return f;
+    }
+
+  new = xcalloc (sizeof (struct file));
+  new->name = new->hname = name;
+  new->update_status = us_none;
+
+  if (HASH_VACANT (f))
+    {
+      new->last = new;
+      hash_insert_at (&files, new, file_slot);
+    }
+  else
+    {
+      /* There is already a double-colon entry for this file.  */
+      new->double_colon = f;
+      f->last->prev = new;
+      f->last = new;
+    }
+
+  return new;
+}
+
+/* Rehash FILE to NAME.  This is not as simple as resetting
+   the 'hname' member, since it must be put in a new hash bucket,
+   and possibly merged with an existing file called NAME.  */
+
+void
+rehash_file (struct file *from_file, const char *to_hname)
+{
+  struct file file_key;
+  struct file **file_slot;
+  struct file *to_file;
+  struct file *deleted_file;
+  struct file *f;
+
+  /* If it's already that name, we're done.  */
+  from_file->builtin = 0;
+  file_key.hname = to_hname;
+  if (! file_hash_cmp (from_file, &file_key))
+    return;
+
+  /* Find the end of the renamed list for the "from" file.  */
+  file_key.hname = from_file->hname;
+  while (from_file->renamed != 0)
+    from_file = from_file->renamed;
+  if (file_hash_cmp (from_file, &file_key))
+    /* hname changed unexpectedly!! */
+    abort ();
+
+  /* Remove the "from" file from the hash.  */
+  deleted_file = hash_delete (&files, from_file);
+  if (deleted_file != from_file)
+    /* from_file isn't the one stored in files */
+    abort ();
+
+  /* Find where the newly renamed file will go in the hash.  */
+  file_key.hname = to_hname;
+  file_slot = (struct file **) hash_find_slot (&files, &file_key);
+  to_file = *file_slot;
+
+  /* Change the hash name for this file.  */
+  from_file->hname = to_hname;
+  for (f = from_file->double_colon; f != 0; f = f->prev)
+    f->hname = to_hname;
+
+  /* If the new name doesn't exist yet just set it to the renamed file.  */
+  if (HASH_VACANT (to_file))
+    {
+      hash_insert_at (&files, from_file, file_slot);
+      return;
+    }
+
+  /* TO_FILE already exists under TO_HNAME.
+     We must retain TO_FILE and merge FROM_FILE into it.  */
+
+  if (from_file->cmds != 0)
+    {
+      if (to_file->cmds == 0)
+        to_file->cmds = from_file->cmds;
+      else if (from_file->cmds != to_file->cmds)
+        {
+          size_t l = strlen (from_file->name);
+          /* We have two sets of commands.  We will go with the
+             one given in the rule explicitly mentioning this name,
+             but give a message to let the user know what's going on.  */
+          if (to_file->cmds->fileinfo.filenm != 0)
+            error (&from_file->cmds->fileinfo,
+                   l + strlen (to_file->cmds->fileinfo.filenm) + INTSTR_LENGTH,
+                   _("Recipe was specified for file '%s' at %s:%lu,"),
+                   from_file->name, to_file->cmds->fileinfo.filenm,
+                   to_file->cmds->fileinfo.lineno);
+          else
+            error (&from_file->cmds->fileinfo, l,
+                   _("Recipe for file '%s' was found by implicit rule search,"),
+                   from_file->name);
+          l += strlen (to_hname);
+          error (&from_file->cmds->fileinfo, l,
+                 _("but '%s' is now considered the same file as '%s'."),
+                 from_file->name, to_hname);
+          error (&from_file->cmds->fileinfo, l,
+                 _("Recipe for '%s' will be ignored in favor of the one for '%s'."),
+                 to_hname, from_file->name);
+        }
+    }
+
+  /* Merge the dependencies of the two files.  */
+
+  if (to_file->deps == 0)
+    to_file->deps = from_file->deps;
+  else
+    {
+      struct dep *deps = to_file->deps;
+      while (deps->next != 0)
+        deps = deps->next;
+      deps->next = from_file->deps;
+    }
+
+  merge_variable_set_lists (&to_file->variables, from_file->variables);
+
+  if (to_file->double_colon && from_file->is_target && !from_file->double_colon)
+    OSS (fatal, NILF, _("can't rename single-colon '%s' to double-colon '%s'"),
+         from_file->name, to_hname);
+  if (!to_file->double_colon  && from_file->double_colon)
+    {
+      if (to_file->is_target)
+        OSS (fatal, NILF,
+             _("can't rename double-colon '%s' to single-colon '%s'"),
+             from_file->name, to_hname);
+      else
+        to_file->double_colon = from_file->double_colon;
+    }
+
+  if (from_file->last_mtime > to_file->last_mtime)
+    /* %%% Kludge so -W wins on a file that gets vpathized.  */
+    to_file->last_mtime = from_file->last_mtime;
+
+  to_file->mtime_before_update = from_file->mtime_before_update;
+
+#define MERGE(field) to_file->field |= from_file->field
+  MERGE (precious);
+  MERGE (tried_implicit);
+  MERGE (updating);
+  MERGE (updated);
+  MERGE (is_target);
+  MERGE (cmd_target);
+  MERGE (phony);
+  MERGE (loaded);
+  MERGE (ignore_vpath);
+#undef MERGE
+
+  to_file->builtin = 0;
+  from_file->renamed = to_file;
+}
+
+/* Rename FILE to NAME.  This is not as simple as resetting
+   the 'name' member, since it must be put in a new hash bucket,
+   and possibly merged with an existing file called NAME.  */
+
+void
+rename_file (struct file *from_file, const char *to_hname)
+{
+  rehash_file (from_file, to_hname);
+  while (from_file)
+    {
+      from_file->name = from_file->hname;
+      from_file = from_file->prev;
+    }
+}
+
+/* Remove all nonprecious intermediate files.
+   If SIG is nonzero, this was caused by a fatal signal,
+   meaning that a different message will be printed, and
+   the message will go to stderr rather than stdout.  */
+
+void
+remove_intermediates (int sig)
+{
+  struct file **file_slot;
+  struct file **file_end;
+  int doneany = 0;
+
+  /* If there's no way we will ever remove anything anyway, punt early.  */
+  if (question_flag || touch_flag || all_secondary)
+    return;
+
+  if (sig && just_print_flag)
+    return;
+
+  file_slot = (struct file **) files.ht_vec;
+  file_end = file_slot + files.ht_size;
+  for ( ; file_slot < file_end; file_slot++)
+    if (! HASH_VACANT (*file_slot))
+      {
+        struct file *f = *file_slot;
+        /* Is this file eligible for automatic deletion?
+           Yes, IFF: it's marked intermediate, it's not secondary, it wasn't
+           given on the command line, and it's either a -include makefile or
+           it's not precious.  */
+        if (f->intermediate && (f->dontcare || !f->precious)
+            && !f->secondary && !f->cmd_target)
+          {
+            int status;
+            if (f->update_status == us_none)
+              /* If nothing would have created this file yet,
+                 don't print an "rm" command for it.  */
+              continue;
+            if (just_print_flag)
+              status = 0;
+            else
+              {
+                status = unlink (f->name);
+                if (status < 0 && errno == ENOENT)
+                  continue;
+              }
+            if (!f->dontcare)
+              {
+                if (sig)
+                  OS (error, NILF,
+                      _("*** Deleting intermediate file '%s'"), f->name);
+                else
+                  {
+                    if (! doneany)
+                      DB (DB_BASIC, (_("Removing intermediate files...\n")));
+                    if (!silent_flag)
+                      {
+                        if (! doneany)
+                          {
+                            fputs ("rm ", stdout);
+                            doneany = 1;
+                          }
+                        else
+                          putchar (' ');
+                        fputs (f->name, stdout);
+                        fflush (stdout);
+                      }
+                  }
+                if (status < 0)
+                  perror_with_name ("unlink: ", f->name);
+              }
+          }
+      }
+
+  if (doneany && !sig)
+    {
+      putchar ('\n');
+      fflush (stdout);
+    }
+}
+
+/* Given a string containing prerequisites (fully expanded), break it up into
+   a struct dep list.  Enter each of these prereqs into the file database.
+ */
+struct dep *
+split_prereqs (char *p)
+{
+  struct dep *new = PARSE_FILE_SEQ (&p, struct dep, MAP_PIPE, NULL,
+                                    PARSEFS_NONE);
+
+  if (*p)
+    {
+      /* Files that follow '|' are "order-only" prerequisites that satisfy the
+         dependency by existing: their modification times are irrelevant.  */
+      struct dep *ood;
+
+      ++p;
+      ood = PARSE_SIMPLE_SEQ (&p, struct dep);
+
+      if (! new)
+        new = ood;
+      else
+        {
+          struct dep *dp;
+          for (dp = new; dp->next != NULL; dp = dp->next)
+            ;
+          dp->next = ood;
+        }
+
+      for (; ood != NULL; ood = ood->next)
+        ood->ignore_mtime = 1;
+    }
+
+  return new;
+}
+
+/* Given a list of prerequisites, enter them into the file database.
+   If STEM is set then first expand patterns using STEM.  */
+struct dep *
+enter_prereqs (struct dep *deps, const char *stem)
+{
+  struct dep *d1;
+
+  if (deps == 0)
+    return 0;
+
+  /* If we have a stem, expand the %'s.  We use patsubst_expand to translate
+     the prerequisites' patterns into plain prerequisite names.  */
+  if (stem)
+    {
+      const char *pattern = "%";
+      char *buffer = variable_expand ("");
+      struct dep *dp = deps, *dl = 0;
+
+      while (dp != 0)
+        {
+          char *percent;
+          int nl = strlen (dp->name) + 1;
+          char *nm = alloca (nl);
+          memcpy (nm, dp->name, nl);
+          percent = find_percent (nm);
+          if (percent)
+            {
+              char *o;
+
+              /* We have to handle empty stems specially, because that
+                 would be equivalent to $(patsubst %,dp->name,) which
+                 will always be empty.  */
+              if (stem[0] == '\0')
+                {
+                  memmove (percent, percent+1, strlen (percent));
+                  o = variable_buffer_output (buffer, nm, strlen (nm) + 1);
+                }
+              else
+                o = patsubst_expand_pat (buffer, stem, pattern, nm,
+                                         pattern+1, percent+1);
+
+              /* If the name expanded to the empty string, ignore it.  */
+              if (buffer[0] == '\0')
+                {
+                  struct dep *df = dp;
+                  if (dp == deps)
+                    dp = deps = deps->next;
+                  else
+                    dp = dl->next = dp->next;
+                  free_dep (df);
+                  continue;
+                }
+
+              /* Save the name.  */
+              dp->name = strcache_add_len (buffer, o - buffer);
+            }
+          dp->stem = stem;
+          dp->staticpattern = 1;
+          dl = dp;
+          dp = dp->next;
+        }
+    }
+
+  /* Enter them as files, unless they need a 2nd expansion.  */
+  for (d1 = deps; d1 != 0; d1 = d1->next)
+    {
+      if (d1->need_2nd_expansion)
+        continue;
+
+      d1->file = lookup_file (d1->name);
+      if (d1->file == 0)
+        d1->file = enter_file (d1->name);
+      d1->staticpattern = 0;
+      d1->name = 0;
+    }
+
+  return deps;
+}
+
+/* Set the intermediate flag.  */
+
+static void
+set_intermediate (const void *item)
+{
+  struct file *f = (struct file *) item;
+  f->intermediate = 1;
+}
+
+/* Expand and parse each dependency line. */
+static void
+expand_deps (struct file *f)
+{
+  struct dep *d;
+  struct dep **dp;
+  const char *file_stem = f->stem;
+  int initialized = 0;
+
+  f->updating = 0;
+
+  /* Walk through the dependencies.  For any dependency that needs 2nd
+     expansion, expand it then insert the result into the list.  */
+  dp = &f->deps;
+  d = f->deps;
+  while (d != 0)
+    {
+      char *p;
+      struct dep *new, *next;
+      char *name = (char *)d->name;
+
+      if (! d->name || ! d->need_2nd_expansion)
+        {
+          /* This one is all set already.  */
+          dp = &d->next;
+          d = d->next;
+          continue;
+        }
+
+      /* If it's from a static pattern rule, convert the patterns into
+         "$*" so they'll expand properly.  */
+      if (d->staticpattern)
+        {
+          char *o = variable_expand ("");
+          o = subst_expand (o, name, "%", "$*", 1, 2, 0);
+          *o = '\0';
+          free (name);
+          d->name = name = xstrdup (variable_buffer);
+          d->staticpattern = 0;
+        }
+
+      /* We're going to do second expansion so initialize file variables for
+         the file. Since the stem for static pattern rules comes from
+         individual dep lines, we will temporarily set f->stem to d->stem.  */
+      if (!initialized)
+        {
+          initialize_file_variables (f, 0);
+          initialized = 1;
+        }
+
+      if (d->stem != 0)
+        f->stem = d->stem;
+
+      set_file_variables (f);
+
+      p = variable_expand_for_file (d->name, f);
+
+      if (d->stem != 0)
+        f->stem = file_stem;
+
+      /* At this point we don't need the name anymore: free it.  */
+      free (name);
+
+      /* Parse the prerequisites and enter them into the file database.  */
+      new = enter_prereqs (split_prereqs (p), d->stem);
+
+      /* If there were no prereqs here (blank!) then throw this one out.  */
+      if (new == 0)
+        {
+          *dp = d->next;
+          free_dep (d);
+          d = *dp;
+          continue;
+        }
+
+      /* Add newly parsed prerequisites.  */
+      next = d->next;
+      *dp = new;
+      for (dp = &new->next, d = new->next; d != 0; dp = &d->next, d = d->next)
+        ;
+      *dp = next;
+      d = *dp;
+    }
+}
+
+/* Reset the updating flag.  */
+
+static void
+reset_updating (const void *item)
+{
+  struct file *f = (struct file *) item;
+  f->updating = 0;
+}
+
+/* For each dependency of each file, make the 'struct dep' point
+   at the appropriate 'struct file' (which may have to be created).
+
+   Also mark the files depended on by .PRECIOUS, .PHONY, .SILENT,
+   and various other special targets.  */
+
+void
+snap_deps (void)
+{
+  struct file *f;
+  struct file *f2;
+  struct dep *d;
+
+  /* Remember that we've done this.  Once we start snapping deps we can no
+     longer define new targets.  */
+  snapped_deps = 1;
+
+  /* Perform second expansion and enter each dependency name as a file.  We
+     must use hash_dump() here because within these loops we likely add new
+     files to the table, possibly causing an in-situ table expansion.
+
+     We only need to do this if second_expansion has been defined; if it
+     hasn't then all deps were expanded as the makefile was read in.  If we
+     ever change make to be able to unset .SECONDARY_EXPANSION this will have
+     to change.  */
+
+  if (second_expansion)
+    {
+      struct file **file_slot_0 = (struct file **) hash_dump (&files, 0, 0);
+      struct file **file_end = file_slot_0 + files.ht_fill;
+      struct file **file_slot;
+      const char *suffixes;
+
+      /* Expand .SUFFIXES: its prerequisites are used for $$* calc.  */
+      f = lookup_file (".SUFFIXES");
+      suffixes = f ? f->name : 0;
+      for (; f != 0; f = f->prev)
+        expand_deps (f);
+
+      /* For every target that's not .SUFFIXES, expand its prerequisites.  */
+
+      for (file_slot = file_slot_0; file_slot < file_end; file_slot++)
+        for (f = *file_slot; f != 0; f = f->prev)
+          if (f->name != suffixes)
+            expand_deps (f);
+      free (file_slot_0);
+    }
+  else
+    /* We're not doing second expansion, so reset updating.  */
+    hash_map (&files, reset_updating);
+
+  /* Now manage all the special targets.  */
+
+  for (f = lookup_file (".PRECIOUS"); f != 0; f = f->prev)
+    for (d = f->deps; d != 0; d = d->next)
+      for (f2 = d->file; f2 != 0; f2 = f2->prev)
+        f2->precious = 1;
+
+  for (f = lookup_file (".LOW_RESOLUTION_TIME"); f != 0; f = f->prev)
+    for (d = f->deps; d != 0; d = d->next)
+      for (f2 = d->file; f2 != 0; f2 = f2->prev)
+        f2->low_resolution_time = 1;
+
+  for (f = lookup_file (".PHONY"); f != 0; f = f->prev)
+    for (d = f->deps; d != 0; d = d->next)
+      for (f2 = d->file; f2 != 0; f2 = f2->prev)
+        {
+          /* Mark this file as phony nonexistent target.  */
+          f2->phony = 1;
+          f2->is_target = 1;
+          f2->last_mtime = NONEXISTENT_MTIME;
+          f2->mtime_before_update = NONEXISTENT_MTIME;
+        }
+
+  for (f = lookup_file (".INTERMEDIATE"); f != 0; f = f->prev)
+    /* Mark .INTERMEDIATE deps as intermediate files.  */
+    for (d = f->deps; d != 0; d = d->next)
+      for (f2 = d->file; f2 != 0; f2 = f2->prev)
+        f2->intermediate = 1;
+    /* .INTERMEDIATE with no deps does nothing.
+       Marking all files as intermediates is useless since the goal targets
+       would be deleted after they are built.  */
+
+  for (f = lookup_file (".SECONDARY"); f != 0; f = f->prev)
+    /* Mark .SECONDARY deps as both intermediate and secondary.  */
+    if (f->deps)
+      for (d = f->deps; d != 0; d = d->next)
+        for (f2 = d->file; f2 != 0; f2 = f2->prev)
+          f2->intermediate = f2->secondary = 1;
+    /* .SECONDARY with no deps listed marks *all* files that way.  */
+    else
+      {
+        all_secondary = 1;
+        hash_map (&files, set_intermediate);
+      }
+
+  f = lookup_file (".EXPORT_ALL_VARIABLES");
+  if (f != 0 && f->is_target)
+    export_all_variables = 1;
+
+  f = lookup_file (".IGNORE");
+  if (f != 0 && f->is_target)
+    {
+      if (f->deps == 0)
+        ignore_errors_flag = 1;
+      else
+        for (d = f->deps; d != 0; d = d->next)
+          for (f2 = d->file; f2 != 0; f2 = f2->prev)
+            f2->command_flags |= COMMANDS_NOERROR;
+    }
+
+  f = lookup_file (".SILENT");
+  if (f != 0 && f->is_target)
+    {
+      if (f->deps == 0)
+        silent_flag = 1;
+      else
+        for (d = f->deps; d != 0; d = d->next)
+          for (f2 = d->file; f2 != 0; f2 = f2->prev)
+            f2->command_flags |= COMMANDS_SILENT;
+    }
+
+  f = lookup_file (".NOTPARALLEL");
+  if (f != 0 && f->is_target)
+    not_parallel = 1;
+
+#ifndef NO_MINUS_C_MINUS_O
+  /* If .POSIX was defined, remove OUTPUT_OPTION to comply.  */
+  /* This needs more work: what if the user sets this in the makefile?
+  if (posix_pedantic)
+    define_variable_cname ("OUTPUT_OPTION", "", o_default, 1);
+  */
+#endif
+}
+
+/* Set the 'command_state' member of FILE and all its 'also_make's.  */
+
+void
+set_command_state (struct file *file, enum cmd_state state)
+{
+  struct dep *d;
+
+  file->command_state = state;
+
+  for (d = file->also_make; d != 0; d = d->next)
+    d->file->command_state = state;
+}
+
+/* Convert an external file timestamp to internal form.  */
+
+FILE_TIMESTAMP
+file_timestamp_cons (const char *fname, time_t stamp, long int ns)
+{
+  int offset = ORDINARY_MTIME_MIN + (FILE_TIMESTAMP_HI_RES ? ns : 0);
+  FILE_TIMESTAMP s = stamp;
+  FILE_TIMESTAMP product = (FILE_TIMESTAMP) s << FILE_TIMESTAMP_LO_BITS;
+  FILE_TIMESTAMP ts = product + offset;
+
+  if (! (s <= FILE_TIMESTAMP_S (ORDINARY_MTIME_MAX)
+         && product <= ts && ts <= ORDINARY_MTIME_MAX))
+    {
+      char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
+      const char *f = fname ? fname : _("Current time");
+      ts = s <= OLD_MTIME ? ORDINARY_MTIME_MIN : ORDINARY_MTIME_MAX;
+      file_timestamp_sprintf (buf, ts);
+      OSS (error, NILF,
+           _("%s: Timestamp out of range; substituting %s"), f, buf);
+    }
+
+  return ts;
+}
+
+/* Return the current time as a file timestamp, setting *RESOLUTION to
+   its resolution.  */
+FILE_TIMESTAMP
+file_timestamp_now (int *resolution)
+{
+  int r;
+  time_t s;
+  int ns;
+
+  /* Don't bother with high-resolution clocks if file timestamps have
+     only one-second resolution.  The code below should work, but it's
+     not worth the hassle of debugging it on hosts where it fails.  */
+#if FILE_TIMESTAMP_HI_RES
+# if HAVE_CLOCK_GETTIME && defined CLOCK_REALTIME
+  {
+    struct timespec timespec;
+    if (clock_gettime (CLOCK_REALTIME, &timespec) == 0)
+      {
+        r = 1;
+        s = timespec.tv_sec;
+        ns = timespec.tv_nsec;
+        goto got_time;
+      }
+  }
+# endif
+# if HAVE_GETTIMEOFDAY
+  {
+    struct timeval timeval;
+    if (gettimeofday (&timeval, 0) == 0)
+      {
+        r = 1000;
+        s = timeval.tv_sec;
+        ns = timeval.tv_usec * 1000;
+        goto got_time;
+      }
+  }
+# endif
+#endif
+
+  r = 1000000000;
+  s = time ((time_t *) 0);
+  ns = 0;
+
+#if FILE_TIMESTAMP_HI_RES
+ got_time:
+#endif
+  *resolution = r;
+  return file_timestamp_cons (0, s, ns);
+}
+
+/* Place into the buffer P a printable representation of the file
+   timestamp TS.  */
+void
+file_timestamp_sprintf (char *p, FILE_TIMESTAMP ts)
+{
+  time_t t = FILE_TIMESTAMP_S (ts);
+  struct tm *tm = localtime (&t);
+
+  if (tm)
+    sprintf (p, "%04d-%02d-%02d %02d:%02d:%02d",
+             tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+             tm->tm_hour, tm->tm_min, tm->tm_sec);
+  else if (t < 0)
+    sprintf (p, "%ld", (long) t);
+  else
+    sprintf (p, "%lu", (unsigned long) t);
+  p += strlen (p);
+
+  /* Append nanoseconds as a fraction, but remove trailing zeros.  We don't
+     know the actual timestamp resolution, since clock_getres applies only to
+     local times, whereas this timestamp might come from a remote filesystem.
+     So removing trailing zeros is the best guess that we can do.  */
+  sprintf (p, ".%09d", FILE_TIMESTAMP_NS (ts));
+  p += strlen (p) - 1;
+  while (*p == '0')
+    p--;
+  p += *p != '.';
+
+  *p = '\0';
+}
+
+/* Print the data base of files.  */
+
+void
+print_prereqs (const struct dep *deps)
+{
+  const struct dep *ood = 0;
+
+  /* Print all normal dependencies; note any order-only deps.  */
+  for (; deps != 0; deps = deps->next)
+    if (! deps->ignore_mtime)
+      printf (" %s", dep_name (deps));
+    else if (! ood)
+      ood = deps;
+
+  /* Print order-only deps, if we have any.  */
+  if (ood)
+    {
+      printf (" | %s", dep_name (ood));
+      for (ood = ood->next; ood != 0; ood = ood->next)
+        if (ood->ignore_mtime)
+          printf (" %s", dep_name (ood));
+    }
+
+  putchar ('\n');
+}
+
+static void
+print_file (const void *item)
+{
+  const struct file *f = item;
+
+  /* If we're not using builtin targets, don't show them.
+
+     Ideally we'd be able to delete them altogether but currently there's no
+     facility to ever delete a file once it's been added.  */
+  if (no_builtin_rules_flag && f->builtin)
+    return;
+
+  putchar ('\n');
+
+  if (f->cmds && f->cmds->recipe_prefix != cmd_prefix)
+    {
+      fputs (".RECIPEPREFIX = ", stdout);
+      cmd_prefix = f->cmds->recipe_prefix;
+      if (cmd_prefix != RECIPEPREFIX_DEFAULT)
+        putchar (cmd_prefix);
+      putchar ('\n');
+    }
+
+  if (f->variables != 0)
+    print_target_variables (f);
+
+  if (!f->is_target)
+    puts (_("# Not a target:"));
+  printf ("%s:%s", f->name, f->double_colon ? ":" : "");
+  print_prereqs (f->deps);
+
+  if (f->precious)
+    puts (_("#  Precious file (prerequisite of .PRECIOUS)."));
+  if (f->phony)
+    puts (_("#  Phony target (prerequisite of .PHONY)."));
+  if (f->cmd_target)
+    puts (_("#  Command line target."));
+  if (f->dontcare)
+    puts (_("#  A default, MAKEFILES, or -include/sinclude makefile."));
+  if (f->builtin)
+    puts (_("#  Builtin rule"));
+  puts (f->tried_implicit
+        ? _("#  Implicit rule search has been done.")
+        : _("#  Implicit rule search has not been done."));
+  if (f->stem != 0)
+    printf (_("#  Implicit/static pattern stem: '%s'\n"), f->stem);
+  if (f->intermediate)
+    puts (_("#  File is an intermediate prerequisite."));
+  if (f->also_make != 0)
+    {
+      const struct dep *d;
+      fputs (_("#  Also makes:"), stdout);
+      for (d = f->also_make; d != 0; d = d->next)
+        printf (" %s", dep_name (d));
+      putchar ('\n');
+    }
+  if (f->last_mtime == UNKNOWN_MTIME)
+    puts (_("#  Modification time never checked."));
+  else if (f->last_mtime == NONEXISTENT_MTIME)
+    puts (_("#  File does not exist."));
+  else if (f->last_mtime == OLD_MTIME)
+    puts (_("#  File is very old."));
+  else
+    {
+      char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
+      file_timestamp_sprintf (buf, f->last_mtime);
+      printf (_("#  Last modified %s\n"), buf);
+    }
+  puts (f->updated
+        ? _("#  File has been updated.") : _("#  File has not been updated."));
+  switch (f->command_state)
+    {
+    case cs_running:
+      puts (_("#  Recipe currently running (THIS IS A BUG)."));
+      break;
+    case cs_deps_running:
+      puts (_("#  Dependencies recipe running (THIS IS A BUG)."));
+      break;
+    case cs_not_started:
+    case cs_finished:
+      switch (f->update_status)
+        {
+        case us_none:
+          break;
+        case us_success:
+          puts (_("#  Successfully updated."));
+          break;
+        case us_question:
+          assert (question_flag);
+          puts (_("#  Needs to be updated (-q is set)."));
+          break;
+        case us_failed:
+          puts (_("#  Failed to be updated."));
+          break;
+        }
+      break;
+    default:
+      puts (_("#  Invalid value in 'command_state' member!"));
+      fflush (stdout);
+      fflush (stderr);
+      abort ();
+    }
+
+  if (f->variables != 0)
+    print_file_variables (f);
+
+  if (f->cmds != 0)
+    print_commands (f->cmds);
+
+  if (f->prev)
+    print_file ((const void *) f->prev);
+}
+
+void
+print_file_data_base (void)
+{
+  puts (_("\n# Files"));
+
+  hash_map (&files, print_file);
+
+  fputs (_("\n# files hash-table stats:\n# "), stdout);
+  hash_print_stats (&files, stdout);
+}
+
+/* Verify the integrity of the data base of files.  */
+
+#define VERIFY_CACHED(_p,_n) \
+    do{                                                                       \
+        if (_p->_n && _p->_n[0] && !strcache_iscached (_p->_n))               \
+          error (NULL, strlen (_p->name) + CSTRLEN (# _n) + strlen (_p->_n),  \
+                 _("%s: Field '%s' not cached: %s"), _p->name, # _n, _p->_n); \
+    }while(0)
+
+static void
+verify_file (const void *item)
+{
+  const struct file *f = item;
+  const struct dep *d;
+
+  VERIFY_CACHED (f, name);
+  VERIFY_CACHED (f, hname);
+  VERIFY_CACHED (f, vpath);
+  VERIFY_CACHED (f, stem);
+
+  /* Check the deps.  */
+  for (d = f->deps; d != 0; d = d->next)
+    {
+      if (! d->need_2nd_expansion)
+        VERIFY_CACHED (d, name);
+      VERIFY_CACHED (d, stem);
+    }
+}
+
+void
+verify_file_data_base (void)
+{
+  hash_map (&files, verify_file);
+}
+
+#define EXPANSION_INCREMENT(_l)  ((((_l) / 500) + 1) * 500)
+
+char *
+build_target_list (char *value)
+{
+  static unsigned long last_targ_count = 0;
+
+  if (files.ht_fill != last_targ_count)
+    {
+      unsigned long max = EXPANSION_INCREMENT (strlen (value));
+      unsigned long len;
+      char *p;
+      struct file **fp = (struct file **) files.ht_vec;
+      struct file **end = &fp[files.ht_size];
+
+      /* Make sure we have at least MAX bytes in the allocated buffer.  */
+      value = xrealloc (value, max);
+
+      p = value;
+      len = 0;
+      for (; fp < end; ++fp)
+        if (!HASH_VACANT (*fp) && (*fp)->is_target)
+          {
+            struct file *f = *fp;
+            int l = strlen (f->name);
+
+            len += l + 1;
+            if (len > max)
+              {
+                unsigned long off = p - value;
+
+                max += EXPANSION_INCREMENT (l + 1);
+                value = xrealloc (value, max);
+                p = &value[off];
+              }
+
+            memcpy (p, f->name, l);
+            p += l;
+            *(p++) = ' ';
+          }
+      *(p-1) = '\0';
+
+      last_targ_count = files.ht_fill;
+    }
+
+  return value;
+}
+
+void
+init_hash_files (void)
+{
+  hash_init (&files, 1000, file_hash_1, file_hash_2, file_hash_cmp);
+}
+
+/* EOF */
diff --git a/filedef.h b/filedef.h
new file mode 100644
index 0000000..b8973db
--- /dev/null
+++ b/filedef.h
@@ -0,0 +1,209 @@
+/* Definition of target file data structures for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+
+/* Structure that represents the info on one file
+   that the makefile says how to make.
+   All of these are chained together through 'next'.  */
+
+#include "hash.h"
+
+struct file
+  {
+    const char *name;
+    const char *hname;          /* Hashed filename */
+    const char *vpath;          /* VPATH/vpath pathname */
+    struct dep *deps;           /* all dependencies, including duplicates */
+    struct commands *cmds;      /* Commands to execute for this target.  */
+    const char *stem;           /* Implicit stem, if an implicit
+                                   rule has been used */
+    struct dep *also_make;      /* Targets that are made by making this.  */
+    struct file *prev;          /* Previous entry for same file name;
+                                   used when there are multiple double-colon
+                                   entries for the same file.  */
+    struct file *last;          /* Last entry for the same file name.  */
+
+    /* File that this file was renamed to.  After any time that a
+       file could be renamed, call 'check_renamed' (below).  */
+    struct file *renamed;
+
+    /* List of variable sets used for this file.  */
+    struct variable_set_list *variables;
+
+    /* Pattern-specific variable reference for this target, or null if there
+       isn't one.  Also see the pat_searched flag, below.  */
+    struct variable_set_list *pat_variables;
+
+    /* Immediate dependent that caused this target to be remade,
+       or nil if there isn't one.  */
+    struct file *parent;
+
+    /* For a double-colon entry, this is the first double-colon entry for
+       the same file.  Otherwise this is null.  */
+    struct file *double_colon;
+
+    FILE_TIMESTAMP last_mtime;  /* File's modtime, if already known.  */
+    FILE_TIMESTAMP mtime_before_update; /* File's modtime before any updating
+                                           has been performed.  */
+    int command_flags;          /* Flags OR'd in for cmds; see commands.h.  */
+    enum update_status          /* Status of the last attempt to update.  */
+      {
+        us_success = 0,         /* Successfully updated.  Must be 0!  */
+        us_none,                /* No attempt to update has been made.  */
+        us_question,            /* Needs to be updated (-q is is set).  */
+        us_failed               /* Update failed.  */
+      } update_status ENUM_BITFIELD (2);
+    enum cmd_state              /* State of the commands.  */
+      {
+        cs_not_started = 0,     /* Not yet started.  Must be 0!  */
+        cs_deps_running,        /* Dep commands running.  */
+        cs_running,             /* Commands running.  */
+        cs_finished             /* Commands finished.  */
+      } command_state ENUM_BITFIELD (2);
+
+    unsigned int builtin:1;     /* True if the file is a builtin rule. */
+    unsigned int precious:1;    /* Non-0 means don't delete file on quit */
+    unsigned int loaded:1;      /* True if the file is a loaded object. */
+    unsigned int low_resolution_time:1; /* Nonzero if this file's time stamp
+                                           has only one-second resolution.  */
+    unsigned int tried_implicit:1; /* Nonzero if have searched
+                                      for implicit rule for making
+                                      this file; don't search again.  */
+    unsigned int updating:1;    /* Nonzero while updating deps of this file */
+    unsigned int updated:1;     /* Nonzero if this file has been remade.  */
+    unsigned int is_target:1;   /* Nonzero if file is described as target.  */
+    unsigned int cmd_target:1;  /* Nonzero if file was given on cmd line.  */
+    unsigned int phony:1;       /* Nonzero if this is a phony file
+                                   i.e., a prerequisite of .PHONY.  */
+    unsigned int intermediate:1;/* Nonzero if this is an intermediate file.  */
+    unsigned int secondary:1;   /* Nonzero means remove_intermediates should
+                                   not delete it.  */
+    unsigned int dontcare:1;    /* Nonzero if no complaint is to be made if
+                                   this target cannot be remade.  */
+    unsigned int ignore_vpath:1;/* Nonzero if we threw out VPATH name.  */
+    unsigned int pat_searched:1;/* Nonzero if we already searched for
+                                   pattern-specific variables.  */
+    unsigned int considered:1;  /* equal to 'considered' if file has been
+                                   considered on current scan of goal chain */
+    unsigned int no_diag:1;     /* True if the file failed to update and no
+                                   diagnostics has been issued (dontcare). */
+  };
+
+
+extern struct file *suffix_file, *default_file;
+
+
+struct file *lookup_file (const char *name);
+struct file *enter_file (const char *name);
+struct dep *split_prereqs (char *prereqstr);
+struct dep *enter_prereqs (struct dep *prereqs, const char *stem);
+void remove_intermediates (int sig);
+void snap_deps (void);
+void rename_file (struct file *file, const char *name);
+void rehash_file (struct file *file, const char *name);
+void set_command_state (struct file *file, enum cmd_state state);
+void notice_finished_file (struct file *file);
+void init_hash_files (void);
+char *build_target_list (char *old_list);
+void print_prereqs (const struct dep *deps);
+void print_file_data_base (void);
+
+#if FILE_TIMESTAMP_HI_RES
+# define FILE_TIMESTAMP_STAT_MODTIME(fname, st) \
+    file_timestamp_cons (fname, (st).st_mtime, (st).ST_MTIM_NSEC)
+#else
+# define FILE_TIMESTAMP_STAT_MODTIME(fname, st) \
+    file_timestamp_cons (fname, (st).st_mtime, 0)
+#endif
+
+/* If FILE_TIMESTAMP is 64 bits (or more), use nanosecond resolution.
+   (Multiply by 2**30 instead of by 10**9 to save time at the cost of
+   slightly decreasing the number of available timestamps.)  With
+   64-bit FILE_TIMESTAMP, this stops working on 2514-05-30 01:53:04
+   UTC, but by then uintmax_t should be larger than 64 bits.  */
+#define FILE_TIMESTAMPS_PER_S (FILE_TIMESTAMP_HI_RES ? 1000000000 : 1)
+#define FILE_TIMESTAMP_LO_BITS (FILE_TIMESTAMP_HI_RES ? 30 : 0)
+
+#define FILE_TIMESTAMP_S(ts) (((ts) - ORDINARY_MTIME_MIN) \
+                              >> FILE_TIMESTAMP_LO_BITS)
+#define FILE_TIMESTAMP_NS(ts) ((int) (((ts) - ORDINARY_MTIME_MIN) \
+                                      & ((1 << FILE_TIMESTAMP_LO_BITS) - 1)))
+
+/* Upper bound on length of string "YYYY-MM-DD HH:MM:SS.NNNNNNNNN"
+   representing a file timestamp.  The upper bound is not necessarily 29,
+   since the year might be less than -999 or greater than 9999.
+
+   Subtract one for the sign bit if in case file timestamps can be negative;
+   subtract FLOOR_LOG2_SECONDS_PER_YEAR to yield an upper bound on how many
+   file timestamp bits might affect the year;
+   302 / 1000 is log10 (2) rounded up;
+   add one for integer division truncation;
+   add one more for a minus sign if file timestamps can be negative;
+   add 4 to allow for any 4-digit epoch year (e.g. 1970);
+   add 25 to allow for "-MM-DD HH:MM:SS.NNNNNNNNN".  */
+#define FLOOR_LOG2_SECONDS_PER_YEAR 24
+#define FILE_TIMESTAMP_PRINT_LEN_BOUND \
+  (((sizeof (FILE_TIMESTAMP) * CHAR_BIT - 1 - FLOOR_LOG2_SECONDS_PER_YEAR) \
+    * 302 / 1000) \
+   + 1 + 1 + 4 + 25)
+
+FILE_TIMESTAMP file_timestamp_cons (char const *, time_t, long int);
+FILE_TIMESTAMP file_timestamp_now (int *);
+void file_timestamp_sprintf (char *p, FILE_TIMESTAMP ts);
+
+/* Return the mtime of file F (a struct file *), caching it.
+   The value is NONEXISTENT_MTIME if the file does not exist.  */
+#define file_mtime(f) file_mtime_1 ((f), 1)
+/* Return the mtime of file F (a struct file *), caching it.
+   Don't search using vpath for the file--if it doesn't actually exist,
+   we don't find it.
+   The value is NONEXISTENT_MTIME if the file does not exist.  */
+#define file_mtime_no_search(f) file_mtime_1 ((f), 0)
+FILE_TIMESTAMP f_mtime (struct file *file, int search);
+#define file_mtime_1(f, v) \
+  ((f)->last_mtime == UNKNOWN_MTIME ? f_mtime ((f), v) : (f)->last_mtime)
+
+/* Special timestamp values.  */
+
+/* The file's timestamp is not yet known.  */
+#define UNKNOWN_MTIME 0
+
+/* The file does not exist.  */
+#define NONEXISTENT_MTIME 1
+
+/* The file does not exist, and we assume that it is older than any
+   actual file.  */
+#define OLD_MTIME 2
+
+/* The smallest and largest ordinary timestamps.  */
+#define ORDINARY_MTIME_MIN (OLD_MTIME + 1)
+#define ORDINARY_MTIME_MAX ((FILE_TIMESTAMP_S (NEW_MTIME) \
+                             << FILE_TIMESTAMP_LO_BITS) \
+                            + ORDINARY_MTIME_MIN + FILE_TIMESTAMPS_PER_S - 1)
+
+/* Modtime value to use for 'infinitely new'.  We used to get the current time
+   from the system and use that whenever we wanted 'new'.  But that causes
+   trouble when the machine running make and the machine holding a file have
+   different ideas about what time it is; and can also lose for 'force'
+   targets, which need to be considered newer than anything that depends on
+   them, even if said dependents' modtimes are in the future.  */
+#define NEW_MTIME INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP)
+
+#define check_renamed(file) \
+  while ((file)->renamed != 0) (file) = (file)->renamed /* No ; here.  */
+
+/* Have we snapped deps yet?  */
+extern int snapped_deps;
diff --git a/function.c b/function.c
new file mode 100644
index 0000000..169c3a1
--- /dev/null
+++ b/function.c
@@ -0,0 +1,2623 @@
+/* Builtin function expansion for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "variable.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+#include "debug.h"
+
+#ifdef _AMIGA
+#include "amiga.h"
+#endif
+
+
+struct function_table_entry
+  {
+    union {
+      char *(*func_ptr) (char *output, char **argv, const char *fname);
+      gmk_func_ptr alloc_func_ptr;
+    } fptr;
+    const char *name;
+    unsigned char len;
+    unsigned char minimum_args;
+    unsigned char maximum_args;
+    unsigned char expand_args:1;
+    unsigned char alloc_fn:1;
+  };
+
+static unsigned long
+function_table_entry_hash_1 (const void *keyv)
+{
+  const struct function_table_entry *key = keyv;
+  return_STRING_N_HASH_1 (key->name, key->len);
+}
+
+static unsigned long
+function_table_entry_hash_2 (const void *keyv)
+{
+  const struct function_table_entry *key = keyv;
+  return_STRING_N_HASH_2 (key->name, key->len);
+}
+
+static int
+function_table_entry_hash_cmp (const void *xv, const void *yv)
+{
+  const struct function_table_entry *x = xv;
+  const struct function_table_entry *y = yv;
+  int result = x->len - y->len;
+  if (result)
+    return result;
+  return_STRING_N_COMPARE (x->name, y->name, x->len);
+}
+
+static struct hash_table function_table;
+
+
+/* Store into VARIABLE_BUFFER at O the result of scanning TEXT and replacing
+   each occurrence of SUBST with REPLACE. TEXT is null-terminated.  SLEN is
+   the length of SUBST and RLEN is the length of REPLACE.  If BY_WORD is
+   nonzero, substitutions are done only on matches which are complete
+   whitespace-delimited words.  */
+
+char *
+subst_expand (char *o, const char *text, const char *subst, const char *replace,
+              unsigned int slen, unsigned int rlen, int by_word)
+{
+  const char *t = text;
+  const char *p;
+
+  if (slen == 0 && !by_word)
+    {
+      /* The first occurrence of "" in any string is its end.  */
+      o = variable_buffer_output (o, t, strlen (t));
+      if (rlen > 0)
+        o = variable_buffer_output (o, replace, rlen);
+      return o;
+    }
+
+  do
+    {
+      if (by_word && slen == 0)
+        /* When matching by words, the empty string should match
+           the end of each word, rather than the end of the whole text.  */
+        p = end_of_token (next_token (t));
+      else
+        {
+          p = strstr (t, subst);
+          if (p == 0)
+            {
+              /* No more matches.  Output everything left on the end.  */
+              o = variable_buffer_output (o, t, strlen (t));
+              return o;
+            }
+        }
+
+      /* Output everything before this occurrence of the string to replace.  */
+      if (p > t)
+        o = variable_buffer_output (o, t, p - t);
+
+      /* If we're substituting only by fully matched words,
+         or only at the ends of words, check that this case qualifies.  */
+      if (by_word
+          && ((p > text && !isblank ((unsigned char)p[-1]))
+              || ! STOP_SET (p[slen], MAP_BLANK|MAP_NUL)))
+        /* Struck out.  Output the rest of the string that is
+           no longer to be replaced.  */
+        o = variable_buffer_output (o, subst, slen);
+      else if (rlen > 0)
+        /* Output the replacement string.  */
+        o = variable_buffer_output (o, replace, rlen);
+
+      /* Advance T past the string to be replaced.  */
+      t = p + slen;
+    } while (*t != '\0');
+
+  return o;
+}
+
+
+/* Store into VARIABLE_BUFFER at O the result of scanning TEXT
+   and replacing strings matching PATTERN with REPLACE.
+   If PATTERN_PERCENT is not nil, PATTERN has already been
+   run through find_percent, and PATTERN_PERCENT is the result.
+   If REPLACE_PERCENT is not nil, REPLACE has already been
+   run through find_percent, and REPLACE_PERCENT is the result.
+   Note that we expect PATTERN_PERCENT and REPLACE_PERCENT to point to the
+   character _AFTER_ the %, not to the % itself.
+*/
+
+char *
+patsubst_expand_pat (char *o, const char *text,
+                     const char *pattern, const char *replace,
+                     const char *pattern_percent, const char *replace_percent)
+{
+  unsigned int pattern_prepercent_len, pattern_postpercent_len;
+  unsigned int replace_prepercent_len, replace_postpercent_len;
+  const char *t;
+  unsigned int len;
+  int doneany = 0;
+
+  /* Record the length of REPLACE before and after the % so we don't have to
+     compute these lengths more than once.  */
+  if (replace_percent)
+    {
+      replace_prepercent_len = replace_percent - replace - 1;
+      replace_postpercent_len = strlen (replace_percent);
+    }
+  else
+    {
+      replace_prepercent_len = strlen (replace);
+      replace_postpercent_len = 0;
+    }
+
+  if (!pattern_percent)
+    /* With no % in the pattern, this is just a simple substitution.  */
+    return subst_expand (o, text, pattern, replace,
+                         strlen (pattern), strlen (replace), 1);
+
+  /* Record the length of PATTERN before and after the %
+     so we don't have to compute it more than once.  */
+  pattern_prepercent_len = pattern_percent - pattern - 1;
+  pattern_postpercent_len = strlen (pattern_percent);
+
+  while ((t = find_next_token (&text, &len)) != 0)
+    {
+      int fail = 0;
+
+      /* Is it big enough to match?  */
+      if (len < pattern_prepercent_len + pattern_postpercent_len)
+        fail = 1;
+
+      /* Does the prefix match? */
+      if (!fail && pattern_prepercent_len > 0
+          && (*t != *pattern
+              || t[pattern_prepercent_len - 1] != pattern_percent[-2]
+              || !strneq (t + 1, pattern + 1, pattern_prepercent_len - 1)))
+        fail = 1;
+
+      /* Does the suffix match? */
+      if (!fail && pattern_postpercent_len > 0
+          && (t[len - 1] != pattern_percent[pattern_postpercent_len - 1]
+              || t[len - pattern_postpercent_len] != *pattern_percent
+              || !strneq (&t[len - pattern_postpercent_len],
+                          pattern_percent, pattern_postpercent_len - 1)))
+        fail = 1;
+
+      if (fail)
+        /* It didn't match.  Output the string.  */
+        o = variable_buffer_output (o, t, len);
+      else
+        {
+          /* It matched.  Output the replacement.  */
+
+          /* Output the part of the replacement before the %.  */
+          o = variable_buffer_output (o, replace, replace_prepercent_len);
+
+          if (replace_percent != 0)
+            {
+              /* Output the part of the matched string that
+                 matched the % in the pattern.  */
+              o = variable_buffer_output (o, t + pattern_prepercent_len,
+                                          len - (pattern_prepercent_len
+                                                 + pattern_postpercent_len));
+              /* Output the part of the replacement after the %.  */
+              o = variable_buffer_output (o, replace_percent,
+                                          replace_postpercent_len);
+            }
+        }
+
+      /* Output a space, but not if the replacement is "".  */
+      if (fail || replace_prepercent_len > 0
+          || (replace_percent != 0 && len + replace_postpercent_len > 0))
+        {
+          o = variable_buffer_output (o, " ", 1);
+          doneany = 1;
+        }
+    }
+  if (doneany)
+    /* Kill the last space.  */
+    --o;
+
+  return o;
+}
+
+/* Store into VARIABLE_BUFFER at O the result of scanning TEXT
+   and replacing strings matching PATTERN with REPLACE.
+   If PATTERN_PERCENT is not nil, PATTERN has already been
+   run through find_percent, and PATTERN_PERCENT is the result.
+   If REPLACE_PERCENT is not nil, REPLACE has already been
+   run through find_percent, and REPLACE_PERCENT is the result.
+   Note that we expect PATTERN_PERCENT and REPLACE_PERCENT to point to the
+   character _AFTER_ the %, not to the % itself.
+*/
+
+char *
+patsubst_expand (char *o, const char *text, char *pattern, char *replace)
+{
+  const char *pattern_percent = find_percent (pattern);
+  const char *replace_percent = find_percent (replace);
+
+  /* If there's a percent in the pattern or replacement skip it.  */
+  if (replace_percent)
+    ++replace_percent;
+  if (pattern_percent)
+    ++pattern_percent;
+
+  return patsubst_expand_pat (o, text, pattern, replace,
+                              pattern_percent, replace_percent);
+}
+
+
+/* Look up a function by name.  */
+
+static const struct function_table_entry *
+lookup_function (const char *s)
+{
+  struct function_table_entry function_table_entry_key;
+  const char *e = s;
+
+  while (STOP_SET (*e, MAP_USERFUNC))
+    e++;
+
+  if (e == s || !STOP_SET(*e, MAP_NUL|MAP_SPACE))
+    return NULL;
+
+  function_table_entry_key.name = s;
+  function_table_entry_key.len = e - s;
+
+  return hash_find_item (&function_table, &function_table_entry_key);
+}
+
+
+/* Return 1 if PATTERN matches STR, 0 if not.  */
+
+int
+pattern_matches (const char *pattern, const char *percent, const char *str)
+{
+  unsigned int sfxlen, strlength;
+
+  if (percent == 0)
+    {
+      unsigned int len = strlen (pattern) + 1;
+      char *new_chars = alloca (len);
+      memcpy (new_chars, pattern, len);
+      percent = find_percent (new_chars);
+      if (percent == 0)
+        return streq (new_chars, str);
+      pattern = new_chars;
+    }
+
+  sfxlen = strlen (percent + 1);
+  strlength = strlen (str);
+
+  if (strlength < (percent - pattern) + sfxlen
+      || !strneq (pattern, str, percent - pattern))
+    return 0;
+
+  return !strcmp (percent + 1, str + (strlength - sfxlen));
+}
+
+
+/* Find the next comma or ENDPAREN (counting nested STARTPAREN and
+   ENDPARENtheses), starting at PTR before END.  Return a pointer to
+   next character.
+
+   If no next argument is found, return NULL.
+*/
+
+static char *
+find_next_argument (char startparen, char endparen,
+                    const char *ptr, const char *end)
+{
+  int count = 0;
+
+  for (; ptr < end; ++ptr)
+    if (*ptr == startparen)
+      ++count;
+
+    else if (*ptr == endparen)
+      {
+        --count;
+        if (count < 0)
+          return NULL;
+      }
+
+    else if (*ptr == ',' && !count)
+      return (char *)ptr;
+
+  /* We didn't find anything.  */
+  return NULL;
+}
+
+
+/* Glob-expand LINE.  The returned pointer is
+   only good until the next call to string_glob.  */
+
+static char *
+string_glob (char *line)
+{
+  static char *result = 0;
+  static unsigned int length;
+  struct nameseq *chain;
+  unsigned int idx;
+
+  chain = PARSE_FILE_SEQ (&line, struct nameseq, MAP_NUL, NULL,
+                          /* We do not want parse_file_seq to strip './'s.
+                             That would break examples like:
+                             $(patsubst ./%.c,obj/%.o,$(wildcard ./?*.c)).  */
+                          PARSEFS_NOSTRIP|PARSEFS_NOCACHE|PARSEFS_EXISTS);
+
+  if (result == 0)
+    {
+      length = 100;
+      result = xmalloc (100);
+    }
+
+  idx = 0;
+  while (chain != 0)
+    {
+      struct nameseq *next = chain->next;
+      unsigned int len = strlen (chain->name);
+
+      if (idx + len + 1 > length)
+        {
+          length += (len + 1) * 2;
+          result = xrealloc (result, length);
+        }
+      memcpy (&result[idx], chain->name, len);
+      idx += len;
+      result[idx++] = ' ';
+
+      /* Because we used PARSEFS_NOCACHE above, we have to free() NAME.  */
+      free ((char *)chain->name);
+      free (chain);
+      chain = next;
+    }
+
+  /* Kill the last space and terminate the string.  */
+  if (idx == 0)
+    result[0] = '\0';
+  else
+    result[idx - 1] = '\0';
+
+  return result;
+}
+
+/*
+  Builtin functions
+ */
+
+static char *
+func_patsubst (char *o, char **argv, const char *funcname UNUSED)
+{
+  o = patsubst_expand (o, argv[2], argv[0], argv[1]);
+  return o;
+}
+
+
+static char *
+func_join (char *o, char **argv, const char *funcname UNUSED)
+{
+  int doneany = 0;
+
+  /* Write each word of the first argument directly followed
+     by the corresponding word of the second argument.
+     If the two arguments have a different number of words,
+     the excess words are just output separated by blanks.  */
+  const char *tp;
+  const char *pp;
+  const char *list1_iterator = argv[0];
+  const char *list2_iterator = argv[1];
+  do
+    {
+      unsigned int len1, len2;
+
+      tp = find_next_token (&list1_iterator, &len1);
+      if (tp != 0)
+        o = variable_buffer_output (o, tp, len1);
+
+      pp = find_next_token (&list2_iterator, &len2);
+      if (pp != 0)
+        o = variable_buffer_output (o, pp, len2);
+
+      if (tp != 0 || pp != 0)
+        {
+          o = variable_buffer_output (o, " ", 1);
+          doneany = 1;
+        }
+    }
+  while (tp != 0 || pp != 0);
+  if (doneany)
+    /* Kill the last blank.  */
+    --o;
+
+  return o;
+}
+
+
+static char *
+func_origin (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* Expand the argument.  */
+  struct variable *v = lookup_variable (argv[0], strlen (argv[0]));
+  if (v == 0)
+    o = variable_buffer_output (o, "undefined", 9);
+  else
+    switch (v->origin)
+      {
+      default:
+      case o_invalid:
+        abort ();
+        break;
+      case o_default:
+        o = variable_buffer_output (o, "default", 7);
+        break;
+      case o_env:
+        o = variable_buffer_output (o, "environment", 11);
+        break;
+      case o_file:
+        o = variable_buffer_output (o, "file", 4);
+        break;
+      case o_env_override:
+        o = variable_buffer_output (o, "environment override", 20);
+        break;
+      case o_command:
+        o = variable_buffer_output (o, "command line", 12);
+        break;
+      case o_override:
+        o = variable_buffer_output (o, "override", 8);
+        break;
+      case o_automatic:
+        o = variable_buffer_output (o, "automatic", 9);
+        break;
+      }
+
+  return o;
+}
+
+static char *
+func_flavor (char *o, char **argv, const char *funcname UNUSED)
+{
+  struct variable *v = lookup_variable (argv[0], strlen (argv[0]));
+
+  if (v == 0)
+    o = variable_buffer_output (o, "undefined", 9);
+  else
+    if (v->recursive)
+      o = variable_buffer_output (o, "recursive", 9);
+    else
+      o = variable_buffer_output (o, "simple", 6);
+
+  return o;
+}
+
+
+static char *
+func_notdir_suffix (char *o, char **argv, const char *funcname)
+{
+  /* Expand the argument.  */
+  const char *list_iterator = argv[0];
+  const char *p2;
+  int doneany =0;
+  unsigned int len=0;
+
+  int is_suffix = funcname[0] == 's';
+  int is_notdir = !is_suffix;
+  int stop = MAP_DIRSEP | (is_suffix ? MAP_DOT : 0);
+#ifdef VMS
+  /* For VMS list_iterator points to a comma separated list. To use the common
+     [find_]next_token, create a local copy and replace the commas with
+     spaces. Obviously, there is a problem if there is a ',' in the VMS filename
+     (can only happen on ODS5), the same problem as with spaces in filenames,
+     which seems to be present in make on all platforms. */
+  char *vms_list_iterator = alloca(strlen(list_iterator) + 1);
+  int i;
+  for (i = 0; list_iterator[i]; i++)
+    if (list_iterator[i] == ',')
+      vms_list_iterator[i] = ' ';
+    else
+      vms_list_iterator[i] = list_iterator[i];
+  vms_list_iterator[i] = list_iterator[i];
+  while ((p2 = find_next_token((const char**) &vms_list_iterator, &len)) != 0)
+#else
+  while ((p2 = find_next_token (&list_iterator, &len)) != 0)
+#endif
+    {
+      const char *p = p2 + len - 1;
+
+      while (p >= p2 && ! STOP_SET (*p, stop))
+        --p;
+
+      if (p >= p2)
+        {
+          if (is_notdir)
+            ++p;
+          else if (*p != '.')
+            continue;
+          o = variable_buffer_output (o, p, len - (p - p2));
+        }
+#ifdef HAVE_DOS_PATHS
+      /* Handle the case of "d:foo/bar".  */
+      else if (is_notdir && p2[0] && p2[1] == ':')
+        {
+          p = p2 + 2;
+          o = variable_buffer_output (o, p, len - (p - p2));
+        }
+#endif
+      else if (is_notdir)
+        o = variable_buffer_output (o, p2, len);
+
+      if (is_notdir || p >= p2)
+        {
+#ifdef VMS
+          o = variable_buffer_output (o, ",", 1);
+#else
+          o = variable_buffer_output (o, " ", 1);
+#endif
+          doneany = 1;
+        }
+    }
+
+  if (doneany)
+    /* Kill last space.  */
+    --o;
+
+  return o;
+}
+
+
+static char *
+func_basename_dir (char *o, char **argv, const char *funcname)
+{
+  /* Expand the argument.  */
+  const char *p3 = argv[0];
+  const char *p2;
+  int doneany = 0;
+  unsigned int len = 0;
+
+  int is_basename = funcname[0] == 'b';
+  int is_dir = !is_basename;
+  int stop = MAP_DIRSEP | (is_basename ? MAP_DOT : 0) | MAP_NUL;
+#ifdef VMS
+  /* As in func_notdir_suffix ... */
+  char *vms_p3 = alloca(strlen(p3) + 1);
+  int i;
+  for (i = 0; p3[i]; i++)
+    if (p3[i] == ',')
+      vms_p3[i] = ' ';
+    else
+      vms_p3[i] = p3[i];
+  vms_p3[i] = p3[i];
+  while ((p2 = find_next_token((const char**) &vms_p3, &len)) != 0)
+#else
+  while ((p2 = find_next_token (&p3, &len)) != 0)
+#endif
+    {
+      const char *p = p2 + len - 1;
+      while (p >= p2 && ! STOP_SET (*p, stop))
+        --p;
+
+      if (p >= p2 && (is_dir))
+        o = variable_buffer_output (o, p2, ++p - p2);
+      else if (p >= p2 && (*p == '.'))
+        o = variable_buffer_output (o, p2, p - p2);
+#ifdef HAVE_DOS_PATHS
+      /* Handle the "d:foobar" case */
+      else if (p2[0] && p2[1] == ':' && is_dir)
+        o = variable_buffer_output (o, p2, 2);
+#endif
+      else if (is_dir)
+#ifdef VMS
+        o = variable_buffer_output (o, "[]", 2);
+#else
+#ifndef _AMIGA
+      o = variable_buffer_output (o, "./", 2);
+#else
+      ; /* Just a nop...  */
+#endif /* AMIGA */
+#endif /* !VMS */
+      else
+        /* The entire name is the basename.  */
+        o = variable_buffer_output (o, p2, len);
+
+#ifdef VMS
+      o = variable_buffer_output (o, ",", 1);
+#else
+      o = variable_buffer_output (o, " ", 1);
+#endif
+      doneany = 1;
+    }
+
+  if (doneany)
+    /* Kill last space.  */
+    --o;
+
+  return o;
+}
+
+static char *
+func_addsuffix_addprefix (char *o, char **argv, const char *funcname)
+{
+  int fixlen = strlen (argv[0]);
+  const char *list_iterator = argv[1];
+  int is_addprefix = funcname[3] == 'p';
+  int is_addsuffix = !is_addprefix;
+
+  int doneany = 0;
+  const char *p;
+  unsigned int len;
+
+  while ((p = find_next_token (&list_iterator, &len)) != 0)
+    {
+      if (is_addprefix)
+        o = variable_buffer_output (o, argv[0], fixlen);
+      o = variable_buffer_output (o, p, len);
+      if (is_addsuffix)
+        o = variable_buffer_output (o, argv[0], fixlen);
+      o = variable_buffer_output (o, " ", 1);
+      doneany = 1;
+    }
+
+  if (doneany)
+    /* Kill last space.  */
+    --o;
+
+  return o;
+}
+
+static char *
+func_subst (char *o, char **argv, const char *funcname UNUSED)
+{
+  o = subst_expand (o, argv[2], argv[0], argv[1], strlen (argv[0]),
+                    strlen (argv[1]), 0);
+
+  return o;
+}
+
+
+static char *
+func_firstword (char *o, char **argv, const char *funcname UNUSED)
+{
+  unsigned int i;
+  const char *words = argv[0];    /* Use a temp variable for find_next_token */
+  const char *p = find_next_token (&words, &i);
+
+  if (p != 0)
+    o = variable_buffer_output (o, p, i);
+
+  return o;
+}
+
+static char *
+func_lastword (char *o, char **argv, const char *funcname UNUSED)
+{
+  unsigned int i;
+  const char *words = argv[0];    /* Use a temp variable for find_next_token */
+  const char *p = NULL;
+  const char *t;
+
+  while ((t = find_next_token (&words, &i)))
+    p = t;
+
+  if (p != 0)
+    o = variable_buffer_output (o, p, i);
+
+  return o;
+}
+
+static char *
+func_words (char *o, char **argv, const char *funcname UNUSED)
+{
+  int i = 0;
+  const char *word_iterator = argv[0];
+  char buf[20];
+
+  while (find_next_token (&word_iterator, NULL) != 0)
+    ++i;
+
+  sprintf (buf, "%d", i);
+  o = variable_buffer_output (o, buf, strlen (buf));
+
+  return o;
+}
+
+/* Set begpp to point to the first non-whitespace character of the string,
+ * and endpp to point to the last non-whitespace character of the string.
+ * If the string is empty or contains nothing but whitespace, endpp will be
+ * begpp-1.
+ */
+char *
+strip_whitespace (const char **begpp, const char **endpp)
+{
+  while (*begpp <= *endpp && isspace ((unsigned char)**begpp))
+    (*begpp) ++;
+  while (*endpp >= *begpp && isspace ((unsigned char)**endpp))
+    (*endpp) --;
+  return (char *)*begpp;
+}
+
+static void
+check_numeric (const char *s, const char *msg)
+{
+  const char *end = s + strlen (s) - 1;
+  const char *beg = s;
+  strip_whitespace (&s, &end);
+
+  for (; s <= end; ++s)
+    if (!ISDIGIT (*s))  /* ISDIGIT only evals its arg once: see makeint.h.  */
+      break;
+
+  if (s <= end || end - beg < 0)
+    OSS (fatal, *expanding_var, "%s: '%s'", msg, beg);
+}
+
+
+
+static char *
+func_word (char *o, char **argv, const char *funcname UNUSED)
+{
+  const char *end_p;
+  const char *p;
+  int i;
+
+  /* Check the first argument.  */
+  check_numeric (argv[0], _("non-numeric first argument to 'word' function"));
+  i = atoi (argv[0]);
+
+  if (i == 0)
+    O (fatal, *expanding_var,
+       _("first argument to 'word' function must be greater than 0"));
+
+  end_p = argv[1];
+  while ((p = find_next_token (&end_p, 0)) != 0)
+    if (--i == 0)
+      break;
+
+  if (i == 0)
+    o = variable_buffer_output (o, p, end_p - p);
+
+  return o;
+}
+
+static char *
+func_wordlist (char *o, char **argv, const char *funcname UNUSED)
+{
+  int start, count;
+
+  /* Check the arguments.  */
+  check_numeric (argv[0],
+                 _("non-numeric first argument to 'wordlist' function"));
+  check_numeric (argv[1],
+                 _("non-numeric second argument to 'wordlist' function"));
+
+  start = atoi (argv[0]);
+  if (start < 1)
+    ON (fatal, *expanding_var,
+        "invalid first argument to 'wordlist' function: '%d'", start);
+
+  count = atoi (argv[1]) - start + 1;
+
+  if (count > 0)
+    {
+      const char *p;
+      const char *end_p = argv[2];
+
+      /* Find the beginning of the "start"th word.  */
+      while (((p = find_next_token (&end_p, 0)) != 0) && --start)
+        ;
+
+      if (p)
+        {
+          /* Find the end of the "count"th word from start.  */
+          while (--count && (find_next_token (&end_p, 0) != 0))
+            ;
+
+          /* Return the stuff in the middle.  */
+          o = variable_buffer_output (o, p, end_p - p);
+        }
+    }
+
+  return o;
+}
+
+static char *
+func_findstring (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* Find the first occurrence of the first string in the second.  */
+  if (strstr (argv[1], argv[0]) != 0)
+    o = variable_buffer_output (o, argv[0], strlen (argv[0]));
+
+  return o;
+}
+
+static char *
+func_foreach (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* expand only the first two.  */
+  char *varname = expand_argument (argv[0], NULL);
+  char *list = expand_argument (argv[1], NULL);
+  const char *body = argv[2];
+
+  int doneany = 0;
+  const char *list_iterator = list;
+  const char *p;
+  unsigned int len;
+  struct variable *var;
+
+  push_new_variable_scope ();
+  var = define_variable (varname, strlen (varname), "", o_automatic, 0);
+
+  /* loop through LIST,  put the value in VAR and expand BODY */
+  while ((p = find_next_token (&list_iterator, &len)) != 0)
+    {
+      char *result = 0;
+
+      free (var->value);
+      var->value = xstrndup (p, len);
+
+      result = allocated_variable_expand (body);
+
+      o = variable_buffer_output (o, result, strlen (result));
+      o = variable_buffer_output (o, " ", 1);
+      doneany = 1;
+      free (result);
+    }
+
+  if (doneany)
+    /* Kill the last space.  */
+    --o;
+
+  pop_variable_scope ();
+  free (varname);
+  free (list);
+
+  return o;
+}
+
+struct a_word
+{
+  struct a_word *next;
+  struct a_word *chain;
+  char *str;
+  int length;
+  int matched;
+};
+
+static unsigned long
+a_word_hash_1 (const void *key)
+{
+  return_STRING_HASH_1 (((struct a_word const *) key)->str);
+}
+
+static unsigned long
+a_word_hash_2 (const void *key)
+{
+  return_STRING_HASH_2 (((struct a_word const *) key)->str);
+}
+
+static int
+a_word_hash_cmp (const void *x, const void *y)
+{
+  int result = ((struct a_word const *) x)->length - ((struct a_word const *) y)->length;
+  if (result)
+    return result;
+  return_STRING_COMPARE (((struct a_word const *) x)->str,
+                         ((struct a_word const *) y)->str);
+}
+
+struct a_pattern
+{
+  struct a_pattern *next;
+  char *str;
+  char *percent;
+  int length;
+};
+
+static char *
+func_filter_filterout (char *o, char **argv, const char *funcname)
+{
+  struct a_word *wordhead;
+  struct a_word **wordtail;
+  struct a_word *wp;
+  struct a_pattern *pathead;
+  struct a_pattern **pattail;
+  struct a_pattern *pp;
+
+  struct hash_table a_word_table;
+  int is_filter = funcname[CSTRLEN ("filter")] == '\0';
+  const char *pat_iterator = argv[0];
+  const char *word_iterator = argv[1];
+  int literals = 0;
+  int words = 0;
+  int hashing = 0;
+  char *p;
+  unsigned int len;
+
+  /* Chop ARGV[0] up into patterns to match against the words.
+     We don't need to preserve it because our caller frees all the
+     argument memory anyway.  */
+
+  pattail = &pathead;
+  while ((p = find_next_token (&pat_iterator, &len)) != 0)
+    {
+      struct a_pattern *pat = alloca (sizeof (struct a_pattern));
+
+      *pattail = pat;
+      pattail = &pat->next;
+
+      if (*pat_iterator != '\0')
+        ++pat_iterator;
+
+      pat->str = p;
+      p[len] = '\0';
+      pat->percent = find_percent (p);
+      if (pat->percent == 0)
+        literals++;
+
+      /* find_percent() might shorten the string so LEN is wrong.  */
+      pat->length = strlen (pat->str);
+    }
+  *pattail = 0;
+
+  /* Chop ARGV[1] up into words to match against the patterns.  */
+
+  wordtail = &wordhead;
+  while ((p = find_next_token (&word_iterator, &len)) != 0)
+    {
+      struct a_word *word = alloca (sizeof (struct a_word));
+
+      *wordtail = word;
+      wordtail = &word->next;
+
+      if (*word_iterator != '\0')
+        ++word_iterator;
+
+      p[len] = '\0';
+      word->str = p;
+      word->length = len;
+      word->matched = 0;
+      word->chain = 0;
+      words++;
+    }
+  *wordtail = 0;
+
+  /* Only use a hash table if arg list lengths justifies the cost.  */
+  hashing = (literals >= 2 && (literals * words) >= 10);
+  if (hashing)
+    {
+      hash_init (&a_word_table, words, a_word_hash_1, a_word_hash_2,
+                 a_word_hash_cmp);
+      for (wp = wordhead; wp != 0; wp = wp->next)
+        {
+          struct a_word *owp = hash_insert (&a_word_table, wp);
+          if (owp)
+            wp->chain = owp;
+        }
+    }
+
+  if (words)
+    {
+      int doneany = 0;
+
+      /* Run each pattern through the words, killing words.  */
+      for (pp = pathead; pp != 0; pp = pp->next)
+        {
+          if (pp->percent)
+            for (wp = wordhead; wp != 0; wp = wp->next)
+              wp->matched |= pattern_matches (pp->str, pp->percent, wp->str);
+          else if (hashing)
+            {
+              struct a_word a_word_key;
+              a_word_key.str = pp->str;
+              a_word_key.length = pp->length;
+              wp = hash_find_item (&a_word_table, &a_word_key);
+              while (wp)
+                {
+                  wp->matched |= 1;
+                  wp = wp->chain;
+                }
+            }
+          else
+            for (wp = wordhead; wp != 0; wp = wp->next)
+              wp->matched |= (wp->length == pp->length
+                              && strneq (pp->str, wp->str, wp->length));
+        }
+
+      /* Output the words that matched (or didn't, for filter-out).  */
+      for (wp = wordhead; wp != 0; wp = wp->next)
+        if (is_filter ? wp->matched : !wp->matched)
+          {
+            o = variable_buffer_output (o, wp->str, strlen (wp->str));
+            o = variable_buffer_output (o, " ", 1);
+            doneany = 1;
+          }
+
+      if (doneany)
+        /* Kill the last space.  */
+        --o;
+    }
+
+  if (hashing)
+    hash_free (&a_word_table, 0);
+
+  return o;
+}
+
+
+static char *
+func_strip (char *o, char **argv, const char *funcname UNUSED)
+{
+  const char *p = argv[0];
+  int doneany = 0;
+
+  while (*p != '\0')
+    {
+      int i=0;
+      const char *word_start;
+
+      while (isspace ((unsigned char)*p))
+        ++p;
+      word_start = p;
+      for (i=0; *p != '\0' && !isspace ((unsigned char)*p); ++p, ++i)
+        {}
+      if (!i)
+        break;
+      o = variable_buffer_output (o, word_start, i);
+      o = variable_buffer_output (o, " ", 1);
+      doneany = 1;
+    }
+
+  if (doneany)
+    /* Kill the last space.  */
+    --o;
+
+  return o;
+}
+
+/*
+  Print a warning or fatal message.
+*/
+static char *
+func_error (char *o, char **argv, const char *funcname)
+{
+  char **argvp;
+  char *msg, *p;
+  int len;
+
+  /* The arguments will be broken on commas.  Rather than create yet
+     another special case where function arguments aren't broken up,
+     just create a format string that puts them back together.  */
+  for (len=0, argvp=argv; *argvp != 0; ++argvp)
+    len += strlen (*argvp) + 2;
+
+  p = msg = alloca (len + 1);
+
+  for (argvp=argv; argvp[1] != 0; ++argvp)
+    {
+      strcpy (p, *argvp);
+      p += strlen (*argvp);
+      *(p++) = ',';
+      *(p++) = ' ';
+    }
+  strcpy (p, *argvp);
+
+  switch (*funcname)
+    {
+    case 'e':
+      OS (fatal, reading_file, "%s", msg);
+
+    case 'w':
+      OS (error, reading_file, "%s", msg);
+      break;
+
+    case 'i':
+      outputs (0, msg);
+      outputs (0, "\n");
+      break;
+
+    default:
+      OS (fatal, *expanding_var, "Internal error: func_error: '%s'", funcname);
+    }
+
+  /* The warning function expands to the empty string.  */
+  return o;
+}
+
+
+/*
+  chop argv[0] into words, and sort them.
+ */
+static char *
+func_sort (char *o, char **argv, const char *funcname UNUSED)
+{
+  const char *t;
+  char **words;
+  int wordi;
+  char *p;
+  unsigned int len;
+
+  /* Find the maximum number of words we'll have.  */
+  t = argv[0];
+  wordi = 0;
+  while ((p = find_next_token (&t, NULL)) != 0)
+    {
+      ++t;
+      ++wordi;
+    }
+
+  words = xmalloc ((wordi == 0 ? 1 : wordi) * sizeof (char *));
+
+  /* Now assign pointers to each string in the array.  */
+  t = argv[0];
+  wordi = 0;
+  while ((p = find_next_token (&t, &len)) != 0)
+    {
+      ++t;
+      p[len] = '\0';
+      words[wordi++] = p;
+    }
+
+  if (wordi)
+    {
+      int i;
+
+      /* Now sort the list of words.  */
+      qsort (words, wordi, sizeof (char *), alpha_compare);
+
+      /* Now write the sorted list, uniquified.  */
+      for (i = 0; i < wordi; ++i)
+        {
+          len = strlen (words[i]);
+          if (i == wordi - 1 || strlen (words[i + 1]) != len
+              || strcmp (words[i], words[i + 1]))
+            {
+              o = variable_buffer_output (o, words[i], len);
+              o = variable_buffer_output (o, " ", 1);
+            }
+        }
+
+      /* Kill the last space.  */
+      --o;
+    }
+
+  free (words);
+
+  return o;
+}
+
+/*
+  $(if condition,true-part[,false-part])
+
+  CONDITION is false iff it evaluates to an empty string.  White
+  space before and after condition are stripped before evaluation.
+
+  If CONDITION is true, then TRUE-PART is evaluated, otherwise FALSE-PART is
+  evaluated (if it exists).  Because only one of the two PARTs is evaluated,
+  you can use $(if ...) to create side-effects (with $(shell ...), for
+  example).
+*/
+
+static char *
+func_if (char *o, char **argv, const char *funcname UNUSED)
+{
+  const char *begp = argv[0];
+  const char *endp = begp + strlen (argv[0]) - 1;
+  int result = 0;
+
+  /* Find the result of the condition: if we have a value, and it's not
+     empty, the condition is true.  If we don't have a value, or it's the
+     empty string, then it's false.  */
+
+  strip_whitespace (&begp, &endp);
+
+  if (begp <= endp)
+    {
+      char *expansion = expand_argument (begp, endp+1);
+
+      result = strlen (expansion);
+      free (expansion);
+    }
+
+  /* If the result is true (1) we want to eval the first argument, and if
+     it's false (0) we want to eval the second.  If the argument doesn't
+     exist we do nothing, otherwise expand it and add to the buffer.  */
+
+  argv += 1 + !result;
+
+  if (*argv)
+    {
+      char *expansion = expand_argument (*argv, NULL);
+
+      o = variable_buffer_output (o, expansion, strlen (expansion));
+
+      free (expansion);
+    }
+
+  return o;
+}
+
+/*
+  $(or condition1[,condition2[,condition3[...]]])
+
+  A CONDITION is false iff it evaluates to an empty string.  White
+  space before and after CONDITION are stripped before evaluation.
+
+  CONDITION1 is evaluated.  If it's true, then this is the result of
+  expansion.  If it's false, CONDITION2 is evaluated, and so on.  If none of
+  the conditions are true, the expansion is the empty string.
+
+  Once a CONDITION is true no further conditions are evaluated
+  (short-circuiting).
+*/
+
+static char *
+func_or (char *o, char **argv, const char *funcname UNUSED)
+{
+  for ( ; *argv ; ++argv)
+    {
+      const char *begp = *argv;
+      const char *endp = begp + strlen (*argv) - 1;
+      char *expansion;
+      int result = 0;
+
+      /* Find the result of the condition: if it's false keep going.  */
+
+      strip_whitespace (&begp, &endp);
+
+      if (begp > endp)
+        continue;
+
+      expansion = expand_argument (begp, endp+1);
+      result = strlen (expansion);
+
+      /* If the result is false keep going.  */
+      if (!result)
+        {
+          free (expansion);
+          continue;
+        }
+
+      /* It's true!  Keep this result and return.  */
+      o = variable_buffer_output (o, expansion, result);
+      free (expansion);
+      break;
+    }
+
+  return o;
+}
+
+/*
+  $(and condition1[,condition2[,condition3[...]]])
+
+  A CONDITION is false iff it evaluates to an empty string.  White
+  space before and after CONDITION are stripped before evaluation.
+
+  CONDITION1 is evaluated.  If it's false, then this is the result of
+  expansion.  If it's true, CONDITION2 is evaluated, and so on.  If all of
+  the conditions are true, the expansion is the result of the last condition.
+
+  Once a CONDITION is false no further conditions are evaluated
+  (short-circuiting).
+*/
+
+static char *
+func_and (char *o, char **argv, const char *funcname UNUSED)
+{
+  char *expansion;
+
+  while (1)
+    {
+      const char *begp = *argv;
+      const char *endp = begp + strlen (*argv) - 1;
+      int result;
+
+      /* An empty condition is always false.  */
+      strip_whitespace (&begp, &endp);
+      if (begp > endp)
+        return o;
+
+      expansion = expand_argument (begp, endp+1);
+      result = strlen (expansion);
+
+      /* If the result is false, stop here: we're done.  */
+      if (!result)
+        break;
+
+      /* Otherwise the result is true.  If this is the last one, keep this
+         result and quit.  Otherwise go on to the next one!  */
+
+      if (*(++argv))
+        free (expansion);
+      else
+        {
+          o = variable_buffer_output (o, expansion, result);
+          break;
+        }
+    }
+
+  free (expansion);
+
+  return o;
+}
+
+static char *
+func_wildcard (char *o, char **argv, const char *funcname UNUSED)
+{
+#ifdef _AMIGA
+   o = wildcard_expansion (argv[0], o);
+#else
+   char *p = string_glob (argv[0]);
+   o = variable_buffer_output (o, p, strlen (p));
+#endif
+   return o;
+}
+
+/*
+  $(eval <makefile string>)
+
+  Always resolves to the empty string.
+
+  Treat the arguments as a segment of makefile, and parse them.
+*/
+
+static char *
+func_eval (char *o, char **argv, const char *funcname UNUSED)
+{
+  char *buf;
+  unsigned int len;
+
+  /* Eval the buffer.  Pop the current variable buffer setting so that the
+     eval'd code can use its own without conflicting.  */
+
+  install_variable_buffer (&buf, &len);
+
+  eval_buffer (argv[0], NULL);
+
+  restore_variable_buffer (buf, len);
+
+  return o;
+}
+
+
+static char *
+func_value (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* Look up the variable.  */
+  struct variable *v = lookup_variable (argv[0], strlen (argv[0]));
+
+  /* Copy its value into the output buffer without expanding it.  */
+  if (v)
+    o = variable_buffer_output (o, v->value, strlen (v->value));
+
+  return o;
+}
+
+/*
+  \r is replaced on UNIX as well. Is this desirable?
+ */
+static void
+fold_newlines (char *buffer, unsigned int *length, int trim_newlines)
+{
+  char *dst = buffer;
+  char *src = buffer;
+  char *last_nonnl = buffer - 1;
+  src[*length] = 0;
+  for (; *src != '\0'; ++src)
+    {
+      if (src[0] == '\r' && src[1] == '\n')
+        continue;
+      if (*src == '\n')
+        {
+          *dst++ = ' ';
+        }
+      else
+        {
+          last_nonnl = dst;
+          *dst++ = *src;
+        }
+    }
+
+  if (!trim_newlines && (last_nonnl < (dst - 2)))
+    last_nonnl = dst - 2;
+
+  *(++last_nonnl) = '\0';
+  *length = last_nonnl - buffer;
+}
+
+
+
+int shell_function_pid = 0, shell_function_completed;
+
+
+#ifdef WINDOWS32
+/*untested*/
+
+#include <windows.h>
+#include <io.h>
+#include "sub_proc.h"
+
+
+int
+windows32_openpipe (int *pipedes, int errfd, pid_t *pid_p, char **command_argv, char **envp)
+{
+  SECURITY_ATTRIBUTES saAttr;
+  HANDLE hIn = INVALID_HANDLE_VALUE;
+  HANDLE hErr = INVALID_HANDLE_VALUE;
+  HANDLE hChildOutRd;
+  HANDLE hChildOutWr;
+  HANDLE hProcess, tmpIn, tmpErr;
+  DWORD e;
+
+  /* Set status for return.  */
+  pipedes[0] = pipedes[1] = -1;
+  *pid_p = (pid_t)-1;
+
+  saAttr.nLength = sizeof (SECURITY_ATTRIBUTES);
+  saAttr.bInheritHandle = TRUE;
+  saAttr.lpSecurityDescriptor = NULL;
+
+  /* Standard handles returned by GetStdHandle can be NULL or
+     INVALID_HANDLE_VALUE if the parent process closed them.  If that
+     happens, we open the null device and pass its handle to
+     process_begin below as the corresponding handle to inherit.  */
+  tmpIn = GetStdHandle (STD_INPUT_HANDLE);
+  if (DuplicateHandle (GetCurrentProcess (), tmpIn,
+                       GetCurrentProcess (), &hIn,
+                       0, TRUE, DUPLICATE_SAME_ACCESS) == FALSE)
+    {
+      e = GetLastError ();
+      if (e == ERROR_INVALID_HANDLE)
+        {
+          tmpIn = CreateFile ("NUL", GENERIC_READ,
+                              FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
+                              OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+          if (tmpIn != INVALID_HANDLE_VALUE
+              && DuplicateHandle (GetCurrentProcess (), tmpIn,
+                                  GetCurrentProcess (), &hIn,
+                                  0, TRUE, DUPLICATE_SAME_ACCESS) == FALSE)
+            CloseHandle (tmpIn);
+        }
+      if (hIn == INVALID_HANDLE_VALUE)
+        {
+          ON (error, NILF,
+              _("windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"), e);
+          return -1;
+        }
+    }
+  tmpErr = (HANDLE)_get_osfhandle (errfd);
+  if (DuplicateHandle (GetCurrentProcess (), tmpErr,
+                       GetCurrentProcess (), &hErr,
+                       0, TRUE, DUPLICATE_SAME_ACCESS) == FALSE)
+    {
+      e = GetLastError ();
+      if (e == ERROR_INVALID_HANDLE)
+        {
+          tmpErr = CreateFile ("NUL", GENERIC_WRITE,
+                               FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
+                               OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+          if (tmpErr != INVALID_HANDLE_VALUE
+              && DuplicateHandle (GetCurrentProcess (), tmpErr,
+                                  GetCurrentProcess (), &hErr,
+                                  0, TRUE, DUPLICATE_SAME_ACCESS) == FALSE)
+            CloseHandle (tmpErr);
+        }
+      if (hErr == INVALID_HANDLE_VALUE)
+        {
+          ON (error, NILF,
+              _("windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"), e);
+          return -1;
+        }
+    }
+
+  if (! CreatePipe (&hChildOutRd, &hChildOutWr, &saAttr, 0))
+    {
+      ON (error, NILF, _("CreatePipe() failed (e=%ld)\n"), GetLastError());
+      return -1;
+    }
+
+  hProcess = process_init_fd (hIn, hChildOutWr, hErr);
+
+  if (!hProcess)
+    {
+      O (error, NILF, _("windows32_openpipe(): process_init_fd() failed\n"));
+      return -1;
+    }
+
+  /* make sure that CreateProcess() has Path it needs */
+  sync_Path_environment ();
+  /* 'sync_Path_environment' may realloc 'environ', so take note of
+     the new value.  */
+  envp = environ;
+
+  if (! process_begin (hProcess, command_argv, envp, command_argv[0], NULL))
+    {
+      /* register process for wait */
+      process_register (hProcess);
+
+      /* set the pid for returning to caller */
+      *pid_p = (pid_t) hProcess;
+
+      /* set up to read data from child */
+      pipedes[0] = _open_osfhandle ((intptr_t) hChildOutRd, O_RDONLY);
+
+      /* this will be closed almost right away */
+      pipedes[1] = _open_osfhandle ((intptr_t) hChildOutWr, O_APPEND);
+      return 0;
+    }
+  else
+    {
+      /* reap/cleanup the failed process */
+      process_cleanup (hProcess);
+
+      /* close handles which were duplicated, they weren't used */
+      if (hIn != INVALID_HANDLE_VALUE)
+        CloseHandle (hIn);
+      if (hErr != INVALID_HANDLE_VALUE)
+        CloseHandle (hErr);
+
+      /* close pipe handles, they won't be used */
+      CloseHandle (hChildOutRd);
+      CloseHandle (hChildOutWr);
+
+      return -1;
+    }
+}
+#endif
+
+
+#ifdef __MSDOS__
+FILE *
+msdos_openpipe (int* pipedes, int *pidp, char *text)
+{
+  FILE *fpipe=0;
+  /* MSDOS can't fork, but it has 'popen'.  */
+  struct variable *sh = lookup_variable ("SHELL", 5);
+  int e;
+  extern int dos_command_running, dos_status;
+
+  /* Make sure not to bother processing an empty line.  */
+  while (isblank ((unsigned char)*text))
+    ++text;
+  if (*text == '\0')
+    return 0;
+
+  if (sh)
+    {
+      char buf[PATH_MAX + 7];
+      /* This makes sure $SHELL value is used by $(shell), even
+         though the target environment is not passed to it.  */
+      sprintf (buf, "SHELL=%s", sh->value);
+      putenv (buf);
+    }
+
+  e = errno;
+  errno = 0;
+  dos_command_running = 1;
+  dos_status = 0;
+  /* If dos_status becomes non-zero, it means the child process
+     was interrupted by a signal, like SIGINT or SIGQUIT.  See
+     fatal_error_signal in commands.c.  */
+  fpipe = popen (text, "rt");
+  dos_command_running = 0;
+  if (!fpipe || dos_status)
+    {
+      pipedes[0] = -1;
+      *pidp = -1;
+      if (dos_status)
+        errno = EINTR;
+      else if (errno == 0)
+        errno = ENOMEM;
+      shell_function_completed = -1;
+    }
+  else
+    {
+      pipedes[0] = fileno (fpipe);
+      *pidp = 42; /* Yes, the Meaning of Life, the Universe, and Everything! */
+      errno = e;
+      shell_function_completed = 1;
+    }
+  return fpipe;
+}
+#endif
+
+/*
+  Do shell spawning, with the naughty bits for different OSes.
+ */
+
+#ifdef VMS
+
+/* VMS can't do $(shell ...)  */
+
+char *
+func_shell_base (char *o, char **argv, int trim_newlines)
+{
+  fprintf (stderr, "This platform does not support shell\n");
+  die (MAKE_TROUBLE);
+  return NULL;
+}
+
+#define func_shell 0
+
+#else
+#ifndef _AMIGA
+char *
+func_shell_base (char *o, char **argv, int trim_newlines)
+{
+  char *batch_filename = NULL;
+  int errfd;
+#ifdef __MSDOS__
+  FILE *fpipe;
+#endif
+  char **command_argv;
+  const char *error_prefix;
+  char **envp;
+  int pipedes[2];
+  pid_t pid;
+
+#ifndef __MSDOS__
+#ifdef WINDOWS32
+  /* Reset just_print_flag.  This is needed on Windows when batch files
+     are used to run the commands, because we normally refrain from
+     creating batch files under -n.  */
+  int j_p_f = just_print_flag;
+  just_print_flag = 0;
+#endif
+
+  /* Construct the argument list.  */
+  command_argv = construct_command_argv (argv[0], NULL, NULL, 0,
+                                         &batch_filename);
+  if (command_argv == 0)
+    {
+#ifdef WINDOWS32
+      just_print_flag = j_p_f;
+#endif
+      return o;
+    }
+#endif
+
+  /* Using a target environment for 'shell' loses in cases like:
+       export var = $(shell echo foobie)
+       bad := $(var)
+     because target_environment hits a loop trying to expand $(var) to put it
+     in the environment.  This is even more confusing when 'var' was not
+     explicitly exported, but just appeared in the calling environment.
+
+     See Savannah bug #10593.
+
+  envp = target_environment (NULL);
+  */
+
+  envp = environ;
+
+  /* For error messages.  */
+  if (reading_file && reading_file->filenm)
+    {
+      char *p = alloca (strlen (reading_file->filenm)+11+4);
+      sprintf (p, "%s:%lu: ", reading_file->filenm, reading_file->lineno);
+      error_prefix = p;
+    }
+  else
+    error_prefix = "";
+
+  /* Set up the output in case the shell writes something.  */
+  output_start ();
+
+  errfd = (output_context && output_context->err >= 0
+           ? output_context->err : FD_STDERR);
+
+#if defined(__MSDOS__)
+  fpipe = msdos_openpipe (pipedes, &pid, argv[0]);
+  if (pipedes[0] < 0)
+    {
+      perror_with_name (error_prefix, "pipe");
+      return o;
+    }
+#elif defined(WINDOWS32)
+  windows32_openpipe (pipedes, errfd, &pid, command_argv, envp);
+  /* Restore the value of just_print_flag.  */
+  just_print_flag = j_p_f;
+
+  if (pipedes[0] < 0)
+    {
+      /* Open of the pipe failed, mark as failed execution.  */
+      shell_function_completed = -1;
+      perror_with_name (error_prefix, "pipe");
+      return o;
+    }
+  else
+#else
+  if (pipe (pipedes) < 0)
+    {
+      perror_with_name (error_prefix, "pipe");
+      return o;
+    }
+
+# ifdef __EMX__
+  /* close some handles that are unnecessary for the child process */
+  CLOSE_ON_EXEC(pipedes[1]);
+  CLOSE_ON_EXEC(pipedes[0]);
+  /* Never use fork()/exec() here! Use spawn() instead in exec_command() */
+  pid = child_execute_job (FD_STDIN, pipedes[1], errfd, command_argv, envp);
+  if (pid < 0)
+    perror_with_name (error_prefix, "spawn");
+# else /* ! __EMX__ */
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name (error_prefix, "fork");
+  else if (pid == 0)
+    {
+#  ifdef SET_STACK_SIZE
+      /* Reset limits, if necessary.  */
+      if (stack_limit.rlim_cur)
+       setrlimit (RLIMIT_STACK, &stack_limit);
+#  endif
+      child_execute_job (FD_STDIN, pipedes[1], errfd, command_argv, envp);
+    }
+  else
+# endif
+#endif
+    {
+      /* We are the parent.  */
+      char *buffer;
+      unsigned int maxlen, i;
+      int cc;
+
+      /* Record the PID for reap_children.  */
+      shell_function_pid = pid;
+#ifndef  __MSDOS__
+      shell_function_completed = 0;
+
+      /* Free the storage only the child needed.  */
+      free (command_argv[0]);
+      free (command_argv);
+
+      /* Close the write side of the pipe.  We test for -1, since
+         pipedes[1] is -1 on MS-Windows, and some versions of MS
+         libraries barf when 'close' is called with -1.  */
+      if (pipedes[1] >= 0)
+        close (pipedes[1]);
+#endif
+
+      /* Set up and read from the pipe.  */
+
+      maxlen = 200;
+      buffer = xmalloc (maxlen + 1);
+
+      /* Read from the pipe until it gets EOF.  */
+      for (i = 0; ; i += cc)
+        {
+          if (i == maxlen)
+            {
+              maxlen += 512;
+              buffer = xrealloc (buffer, maxlen + 1);
+            }
+
+          EINTRLOOP (cc, read (pipedes[0], &buffer[i], maxlen - i));
+          if (cc <= 0)
+            break;
+        }
+      buffer[i] = '\0';
+
+      /* Close the read side of the pipe.  */
+#ifdef  __MSDOS__
+      if (fpipe)
+        (void) pclose (fpipe);
+#else
+      (void) close (pipedes[0]);
+#endif
+
+      /* Loop until child_handler or reap_children()  sets
+         shell_function_completed to the status of our child shell.  */
+      while (shell_function_completed == 0)
+        reap_children (1, 0);
+
+      if (batch_filename)
+        {
+          DB (DB_VERBOSE, (_("Cleaning up temporary batch file %s\n"),
+                           batch_filename));
+          remove (batch_filename);
+          free (batch_filename);
+        }
+      shell_function_pid = 0;
+
+      /* The child_handler function will set shell_function_completed
+         to 1 when the child dies normally, or to -1 if it
+         dies with status 127, which is most likely an exec fail.  */
+
+      if (shell_function_completed == -1)
+        {
+          /* This likely means that the execvp failed, so we should just
+             write the error message in the pipe from the child.  */
+          fputs (buffer, stderr);
+          fflush (stderr);
+        }
+      else
+        {
+          /* The child finished normally.  Replace all newlines in its output
+             with spaces, and put that in the variable output buffer.  */
+          fold_newlines (buffer, &i, trim_newlines);
+          o = variable_buffer_output (o, buffer, i);
+        }
+
+      free (buffer);
+    }
+
+  return o;
+}
+
+#else   /* _AMIGA */
+
+/* Do the Amiga version of func_shell.  */
+
+char *
+func_shell_base (char *o, char **argv, int trim_newlines)
+{
+  /* Amiga can't fork nor spawn, but I can start a program with
+     redirection of my choice.  However, this means that we
+     don't have an opportunity to reopen stdout to trap it.  Thus,
+     we save our own stdout onto a new descriptor and dup a temp
+     file's descriptor onto our stdout temporarily.  After we
+     spawn the shell program, we dup our own stdout back to the
+     stdout descriptor.  The buffer reading is the same as above,
+     except that we're now reading from a file.  */
+
+#include <dos/dos.h>
+#include <proto/dos.h>
+
+  BPTR child_stdout;
+  char tmp_output[FILENAME_MAX];
+  unsigned int maxlen = 200, i;
+  int cc;
+  char * buffer, * ptr;
+  char ** aptr;
+  int len = 0;
+  char* batch_filename = NULL;
+
+  /* Construct the argument list.  */
+  command_argv = construct_command_argv (argv[0], NULL, NULL, 0,
+                                         &batch_filename);
+  if (command_argv == 0)
+    return o;
+
+  /* Note the mktemp() is a security hole, but this only runs on Amiga.
+     Ideally we would use output_tmpfile(), but this uses a special
+     Open(), not fopen(), and I'm not familiar enough with the code to mess
+     with it.  */
+  strcpy (tmp_output, "t:MakeshXXXXXXXX");
+  mktemp (tmp_output);
+  child_stdout = Open (tmp_output, MODE_NEWFILE);
+
+  for (aptr=command_argv; *aptr; aptr++)
+    len += strlen (*aptr) + 1;
+
+  buffer = xmalloc (len + 1);
+  ptr = buffer;
+
+  for (aptr=command_argv; *aptr; aptr++)
+    {
+      strcpy (ptr, *aptr);
+      ptr += strlen (ptr) + 1;
+      *ptr ++ = ' ';
+      *ptr = 0;
+    }
+
+  ptr[-1] = '\n';
+
+  Execute (buffer, NULL, child_stdout);
+  free (buffer);
+
+  Close (child_stdout);
+
+  child_stdout = Open (tmp_output, MODE_OLDFILE);
+
+  buffer = xmalloc (maxlen);
+  i = 0;
+  do
+    {
+      if (i == maxlen)
+        {
+          maxlen += 512;
+          buffer = xrealloc (buffer, maxlen + 1);
+        }
+
+      cc = Read (child_stdout, &buffer[i], maxlen - i);
+      if (cc > 0)
+        i += cc;
+    } while (cc > 0);
+
+  Close (child_stdout);
+
+  fold_newlines (buffer, &i, trim_newlines);
+  o = variable_buffer_output (o, buffer, i);
+  free (buffer);
+  return o;
+}
+#endif  /* _AMIGA */
+
+char *
+func_shell (char *o, char **argv, const char *funcname UNUSED)
+{
+  return func_shell_base (o, argv, 1);
+}
+#endif  /* !VMS */
+
+#ifdef EXPERIMENTAL
+
+/*
+  equality. Return is string-boolean, i.e., the empty string is false.
+ */
+static char *
+func_eq (char *o, char **argv, char *funcname UNUSED)
+{
+  int result = ! strcmp (argv[0], argv[1]);
+  o = variable_buffer_output (o,  result ? "1" : "", result);
+  return o;
+}
+
+
+/*
+  string-boolean not operator.
+ */
+static char *
+func_not (char *o, char **argv, char *funcname UNUSED)
+{
+  const char *s = argv[0];
+  int result = 0;
+  while (isspace ((unsigned char)*s))
+    s++;
+  result = ! (*s);
+  o = variable_buffer_output (o,  result ? "1" : "", result);
+  return o;
+}
+#endif
+
+
+#ifdef HAVE_DOS_PATHS
+# ifdef __CYGWIN__
+#  define IS_ABSOLUTE(n) ((n[0] && n[1] == ':') || STOP_SET (n[0], MAP_DIRSEP))
+# else
+#  define IS_ABSOLUTE(n) (n[0] && n[1] == ':')
+# endif
+# define ROOT_LEN 3
+#else
+#define IS_ABSOLUTE(n) (n[0] == '/')
+#define ROOT_LEN 1
+#endif
+
+/* Return the absolute name of file NAME which does not contain any '.',
+   '..' components nor any repeated path separators ('/').   */
+
+static char *
+abspath (const char *name, char *apath)
+{
+  char *dest;
+  const char *start, *end, *apath_limit;
+  unsigned long root_len = ROOT_LEN;
+
+  if (name[0] == '\0' || apath == NULL)
+    return NULL;
+
+  apath_limit = apath + GET_PATH_MAX;
+
+  if (!IS_ABSOLUTE(name))
+    {
+      /* It is unlikely we would make it until here but just to make sure. */
+      if (!starting_directory)
+        return NULL;
+
+      strcpy (apath, starting_directory);
+
+#ifdef HAVE_DOS_PATHS
+      if (STOP_SET (name[0], MAP_DIRSEP))
+        {
+          if (STOP_SET (name[1], MAP_DIRSEP))
+            {
+              /* A UNC.  Don't prepend a drive letter.  */
+              apath[0] = name[0];
+              apath[1] = name[1];
+              root_len = 2;
+            }
+          /* We have /foo, an absolute file name except for the drive
+             letter.  Assume the missing drive letter is the current
+             drive, which we can get if we remove from starting_directory
+             everything past the root directory.  */
+          apath[root_len] = '\0';
+        }
+#endif
+
+      dest = strchr (apath, '\0');
+    }
+  else
+    {
+#if defined(__CYGWIN__) && defined(HAVE_DOS_PATHS)
+      if (STOP_SET (name[0], MAP_DIRSEP))
+        root_len = 1;
+#endif
+      strncpy (apath, name, root_len);
+      apath[root_len] = '\0';
+      dest = apath + root_len;
+      /* Get past the root, since we already copied it.  */
+      name += root_len;
+#ifdef HAVE_DOS_PATHS
+      if (! STOP_SET (apath[root_len - 1], MAP_DIRSEP))
+        {
+          /* Convert d:foo into d:./foo and increase root_len.  */
+          apath[2] = '.';
+          apath[3] = '/';
+          dest++;
+          root_len++;
+          /* strncpy above copied one character too many.  */
+          name--;
+        }
+      else
+        apath[root_len - 1] = '/'; /* make sure it's a forward slash */
+#endif
+    }
+
+  for (start = end = name; *start != '\0'; start = end)
+    {
+      unsigned long len;
+
+      /* Skip sequence of multiple path-separators.  */
+      while (STOP_SET (*start, MAP_DIRSEP))
+        ++start;
+
+      /* Find end of path component.  */
+      for (end = start; ! STOP_SET (*end, MAP_DIRSEP|MAP_NUL); ++end)
+        ;
+
+      len = end - start;
+
+      if (len == 0)
+        break;
+      else if (len == 1 && start[0] == '.')
+        /* nothing */;
+      else if (len == 2 && start[0] == '.' && start[1] == '.')
+        {
+          /* Back up to previous component, ignore if at root already.  */
+          if (dest > apath + root_len)
+            for (--dest; ! STOP_SET (dest[-1], MAP_DIRSEP); --dest)
+              ;
+        }
+      else
+        {
+          if (! STOP_SET (dest[-1], MAP_DIRSEP))
+            *dest++ = '/';
+
+          if (dest + len >= apath_limit)
+            return NULL;
+
+          dest = memcpy (dest, start, len);
+          dest += len;
+          *dest = '\0';
+        }
+    }
+
+  /* Unless it is root strip trailing separator.  */
+  if (dest > apath + root_len && STOP_SET (dest[-1], MAP_DIRSEP))
+    --dest;
+
+  *dest = '\0';
+
+  return apath;
+}
+
+
+static char *
+func_realpath (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* Expand the argument.  */
+  const char *p = argv[0];
+  const char *path = 0;
+  int doneany = 0;
+  unsigned int len = 0;
+
+  while ((path = find_next_token (&p, &len)) != 0)
+    {
+      if (len < GET_PATH_MAX)
+        {
+          char *rp;
+          struct stat st;
+          PATH_VAR (in);
+          PATH_VAR (out);
+
+          strncpy (in, path, len);
+          in[len] = '\0';
+
+#ifdef HAVE_REALPATH
+          ENULLLOOP (rp, realpath (in, out));
+#else
+          rp = abspath (in, out);
+#endif
+
+          if (rp)
+            {
+              int r;
+              EINTRLOOP (r, stat (out, &st));
+              if (r == 0)
+                {
+                  o = variable_buffer_output (o, out, strlen (out));
+                  o = variable_buffer_output (o, " ", 1);
+                  doneany = 1;
+                }
+            }
+        }
+    }
+
+  /* Kill last space.  */
+  if (doneany)
+    --o;
+
+  return o;
+}
+
+static char *
+func_file (char *o, char **argv, const char *funcname UNUSED)
+{
+  char *fn = argv[0];
+
+  if (fn[0] == '>')
+    {
+      FILE *fp;
+      const char *mode = "w";
+
+      /* We are writing a file.  */
+      ++fn;
+      if (fn[0] == '>')
+        {
+          mode = "a";
+          ++fn;
+        }
+      fn = next_token (fn);
+
+      fp = fopen (fn, mode);
+      if (fp == NULL)
+        {
+          const char *err = strerror (errno);
+          OSS (fatal, reading_file, _("open: %s: %s"), fn, err);
+        }
+      if (argv[1])
+        {
+          int l = strlen (argv[1]);
+          int nl = l == 0 || argv[1][l-1] != '\n';
+
+          if (fputs (argv[1], fp) == EOF || (nl && fputc ('\n', fp) == EOF))
+            {
+              const char *err = strerror (errno);
+              OSS (fatal, reading_file, _("write: %s: %s"), fn, err);
+            }
+        }
+      fclose (fp);
+    }
+  else
+    OS (fatal, reading_file, _("Invalid file operation: %s"), fn);
+
+  return o;
+}
+
+static char *
+func_abspath (char *o, char **argv, const char *funcname UNUSED)
+{
+  /* Expand the argument.  */
+  const char *p = argv[0];
+  const char *path = 0;
+  int doneany = 0;
+  unsigned int len = 0;
+
+  while ((path = find_next_token (&p, &len)) != 0)
+    {
+      if (len < GET_PATH_MAX)
+        {
+          PATH_VAR (in);
+          PATH_VAR (out);
+
+          strncpy (in, path, len);
+          in[len] = '\0';
+
+          if (abspath (in, out))
+            {
+              o = variable_buffer_output (o, out, strlen (out));
+              o = variable_buffer_output (o, " ", 1);
+              doneany = 1;
+            }
+        }
+    }
+
+  /* Kill last space.  */
+  if (doneany)
+    --o;
+
+  return o;
+}
+
+/* Lookup table for builtin functions.
+
+   This doesn't have to be sorted; we use a straight lookup.  We might gain
+   some efficiency by moving most often used functions to the start of the
+   table.
+
+   If MAXIMUM_ARGS is 0, that means there is no maximum and all
+   comma-separated values are treated as arguments.
+
+   EXPAND_ARGS means that all arguments should be expanded before invocation.
+   Functions that do namespace tricks (foreach) don't automatically expand.  */
+
+static char *func_call (char *o, char **argv, const char *funcname);
+
+#define FT_ENTRY(_name, _min, _max, _exp, _func) \
+  { { (_func) }, STRING_SIZE_TUPLE(_name), (_min), (_max), (_exp), 0 }
+
+static struct function_table_entry function_table_init[] =
+{
+ /*         Name            MIN MAX EXP? Function */
+  FT_ENTRY ("abspath",       0,  1,  1,  func_abspath),
+  FT_ENTRY ("addprefix",     2,  2,  1,  func_addsuffix_addprefix),
+  FT_ENTRY ("addsuffix",     2,  2,  1,  func_addsuffix_addprefix),
+  FT_ENTRY ("basename",      0,  1,  1,  func_basename_dir),
+  FT_ENTRY ("dir",           0,  1,  1,  func_basename_dir),
+  FT_ENTRY ("notdir",        0,  1,  1,  func_notdir_suffix),
+  FT_ENTRY ("subst",         3,  3,  1,  func_subst),
+  FT_ENTRY ("suffix",        0,  1,  1,  func_notdir_suffix),
+  FT_ENTRY ("filter",        2,  2,  1,  func_filter_filterout),
+  FT_ENTRY ("filter-out",    2,  2,  1,  func_filter_filterout),
+  FT_ENTRY ("findstring",    2,  2,  1,  func_findstring),
+  FT_ENTRY ("firstword",     0,  1,  1,  func_firstword),
+  FT_ENTRY ("flavor",        0,  1,  1,  func_flavor),
+  FT_ENTRY ("join",          2,  2,  1,  func_join),
+  FT_ENTRY ("lastword",      0,  1,  1,  func_lastword),
+  FT_ENTRY ("patsubst",      3,  3,  1,  func_patsubst),
+  FT_ENTRY ("realpath",      0,  1,  1,  func_realpath),
+  FT_ENTRY ("shell",         0,  1,  1,  func_shell),
+  FT_ENTRY ("sort",          0,  1,  1,  func_sort),
+  FT_ENTRY ("strip",         0,  1,  1,  func_strip),
+  FT_ENTRY ("wildcard",      0,  1,  1,  func_wildcard),
+  FT_ENTRY ("word",          2,  2,  1,  func_word),
+  FT_ENTRY ("wordlist",      3,  3,  1,  func_wordlist),
+  FT_ENTRY ("words",         0,  1,  1,  func_words),
+  FT_ENTRY ("origin",        0,  1,  1,  func_origin),
+  FT_ENTRY ("foreach",       3,  3,  0,  func_foreach),
+  FT_ENTRY ("call",          1,  0,  1,  func_call),
+  FT_ENTRY ("info",          0,  1,  1,  func_error),
+  FT_ENTRY ("error",         0,  1,  1,  func_error),
+  FT_ENTRY ("warning",       0,  1,  1,  func_error),
+  FT_ENTRY ("if",            2,  3,  0,  func_if),
+  FT_ENTRY ("or",            1,  0,  0,  func_or),
+  FT_ENTRY ("and",           1,  0,  0,  func_and),
+  FT_ENTRY ("value",         0,  1,  1,  func_value),
+  FT_ENTRY ("eval",          0,  1,  1,  func_eval),
+  FT_ENTRY ("file",          1,  2,  1,  func_file),
+#ifdef EXPERIMENTAL
+  FT_ENTRY ("eq",            2,  2,  1,  func_eq),
+  FT_ENTRY ("not",           0,  1,  1,  func_not),
+#endif
+};
+
+#define FUNCTION_TABLE_ENTRIES (sizeof (function_table_init) / sizeof (struct function_table_entry))
+
+
+/* These must come after the definition of function_table.  */
+
+static char *
+expand_builtin_function (char *o, int argc, char **argv,
+                         const struct function_table_entry *entry_p)
+{
+  char *p;
+
+  if (argc < (int)entry_p->minimum_args)
+    fatal (*expanding_var, strlen (entry_p->name),
+           _("insufficient number of arguments (%d) to function '%s'"),
+           argc, entry_p->name);
+
+  /* I suppose technically some function could do something with no arguments,
+     but so far no internal ones do, so just test it for all functions here
+     rather than in each one.  We can change it later if necessary.  */
+
+  if (!argc && !entry_p->alloc_fn)
+    return o;
+
+  if (!entry_p->fptr.func_ptr)
+    OS (fatal, *expanding_var,
+        _("unimplemented on this platform: function '%s'"), entry_p->name);
+
+  if (!entry_p->alloc_fn)
+    return entry_p->fptr.func_ptr (o, argv, entry_p->name);
+
+  /* This function allocates memory and returns it to us.
+     Write it to the variable buffer, then free it.  */
+
+  p = entry_p->fptr.alloc_func_ptr (entry_p->name, argc, argv);
+  if (p)
+    {
+      o = variable_buffer_output (o, p, strlen (p));
+      free (p);
+    }
+
+  return o;
+}
+
+/* Check for a function invocation in *STRINGP.  *STRINGP points at the
+   opening ( or { and is not null-terminated.  If a function invocation
+   is found, expand it into the buffer at *OP, updating *OP, incrementing
+   *STRINGP past the reference and returning nonzero.  If not, return zero.  */
+
+int
+handle_function (char **op, const char **stringp)
+{
+  const struct function_table_entry *entry_p;
+  char openparen = (*stringp)[0];
+  char closeparen = openparen == '(' ? ')' : '}';
+  const char *beg;
+  const char *end;
+  int count = 0;
+  char *abeg = NULL;
+  char **argv, **argvp;
+  int nargs;
+
+  beg = *stringp + 1;
+
+  entry_p = lookup_function (beg);
+
+  if (!entry_p)
+    return 0;
+
+  /* We found a builtin function.  Find the beginning of its arguments (skip
+     whitespace after the name).  */
+
+  beg = next_token (beg + entry_p->len);
+
+  /* Find the end of the function invocation, counting nested use of
+     whichever kind of parens we use.  Since we're looking, count commas
+     to get a rough estimate of how many arguments we might have.  The
+     count might be high, but it'll never be low.  */
+
+  for (nargs=1, end=beg; *end != '\0'; ++end)
+    if (*end == ',')
+      ++nargs;
+    else if (*end == openparen)
+      ++count;
+    else if (*end == closeparen && --count < 0)
+      break;
+
+  if (count >= 0)
+    fatal (*expanding_var, strlen (entry_p->name),
+           _("unterminated call to function '%s': missing '%c'"),
+           entry_p->name, closeparen);
+
+  *stringp = end;
+
+  /* Get some memory to store the arg pointers.  */
+  argvp = argv = alloca (sizeof (char *) * (nargs + 2));
+
+  /* Chop the string into arguments, then a nul.  As soon as we hit
+     MAXIMUM_ARGS (if it's >0) assume the rest of the string is part of the
+     last argument.
+
+     If we're expanding, store pointers to the expansion of each one.  If
+     not, make a duplicate of the string and point into that, nul-terminating
+     each argument.  */
+
+  if (entry_p->expand_args)
+    {
+      const char *p;
+      for (p=beg, nargs=0; p <= end; ++argvp)
+        {
+          const char *next;
+
+          ++nargs;
+
+          if (nargs == entry_p->maximum_args
+              || (! (next = find_next_argument (openparen, closeparen, p, end))))
+            next = end;
+
+          *argvp = expand_argument (p, next);
+          p = next + 1;
+        }
+    }
+  else
+    {
+      int len = end - beg;
+      char *p, *aend;
+
+      abeg = xmalloc (len+1);
+      memcpy (abeg, beg, len);
+      abeg[len] = '\0';
+      aend = abeg + len;
+
+      for (p=abeg, nargs=0; p <= aend; ++argvp)
+        {
+          char *next;
+
+          ++nargs;
+
+          if (nargs == entry_p->maximum_args
+              || (! (next = find_next_argument (openparen, closeparen, p, aend))))
+            next = aend;
+
+          *argvp = p;
+          *next = '\0';
+          p = next + 1;
+        }
+    }
+  *argvp = NULL;
+
+  /* Finally!  Run the function...  */
+  *op = expand_builtin_function (*op, nargs, argv, entry_p);
+
+  /* Free memory.  */
+  if (entry_p->expand_args)
+    for (argvp=argv; *argvp != 0; ++argvp)
+      free (*argvp);
+  else
+    free (abeg);
+
+  return 1;
+}
+
+
+/* User-defined functions.  Expand the first argument as either a builtin
+   function or a make variable, in the context of the rest of the arguments
+   assigned to $1, $2, ... $N.  $0 is the name of the function.  */
+
+static char *
+func_call (char *o, char **argv, const char *funcname UNUSED)
+{
+  static int max_args = 0;
+  char *fname;
+  char *cp;
+  char *body;
+  int flen;
+  int i;
+  int saved_args;
+  const struct function_table_entry *entry_p;
+  struct variable *v;
+
+  /* There is no way to define a variable with a space in the name, so strip
+     leading and trailing whitespace as a favor to the user.  */
+  fname = argv[0];
+  while (isspace ((unsigned char)*fname))
+    ++fname;
+
+  cp = fname + strlen (fname) - 1;
+  while (cp > fname && isspace ((unsigned char)*cp))
+    --cp;
+  cp[1] = '\0';
+
+  /* Calling nothing is a no-op */
+  if (*fname == '\0')
+    return o;
+
+  /* Are we invoking a builtin function?  */
+
+  entry_p = lookup_function (fname);
+  if (entry_p)
+    {
+      /* How many arguments do we have?  */
+      for (i=0; argv[i+1]; ++i)
+        ;
+      return expand_builtin_function (o, i, argv+1, entry_p);
+    }
+
+  /* Not a builtin, so the first argument is the name of a variable to be
+     expanded and interpreted as a function.  Find it.  */
+  flen = strlen (fname);
+
+  v = lookup_variable (fname, flen);
+
+  if (v == 0)
+    warn_undefined (fname, flen);
+
+  if (v == 0 || *v->value == '\0')
+    return o;
+
+  body = alloca (flen + 4);
+  body[0] = '$';
+  body[1] = '(';
+  memcpy (body + 2, fname, flen);
+  body[flen+2] = ')';
+  body[flen+3] = '\0';
+
+  /* Set up arguments $(1) .. $(N).  $(0) is the function name.  */
+
+  push_new_variable_scope ();
+
+  for (i=0; *argv; ++i, ++argv)
+    {
+      char num[11];
+
+      sprintf (num, "%d", i);
+      define_variable (num, strlen (num), *argv, o_automatic, 0);
+    }
+
+  /* If the number of arguments we have is < max_args, it means we're inside
+     a recursive invocation of $(call ...).  Fill in the remaining arguments
+     in the new scope with the empty value, to hide them from this
+     invocation.  */
+
+  for (; i < max_args; ++i)
+    {
+      char num[11];
+
+      sprintf (num, "%d", i);
+      define_variable (num, strlen (num), "", o_automatic, 0);
+    }
+
+  /* Expand the body in the context of the arguments, adding the result to
+     the variable buffer.  */
+
+  v->exp_count = EXP_COUNT_MAX;
+
+  saved_args = max_args;
+  max_args = i;
+  o = variable_expand_string (o, body, flen+3);
+  max_args = saved_args;
+
+  v->exp_count = 0;
+
+  pop_variable_scope ();
+
+  return o + strlen (o);
+}
+
+void
+define_new_function (const gmk_floc *flocp, const char *name,
+                     unsigned int min, unsigned int max, unsigned int flags,
+                     gmk_func_ptr func)
+{
+  const char *e = name;
+  struct function_table_entry *ent;
+  size_t len;
+
+  while (STOP_SET (*e, MAP_USERFUNC))
+    e++;
+  len = e - name;
+
+  if (len == 0)
+    O (fatal, flocp, _("Empty function name"));
+  if (*name == '.' || *e != '\0')
+    OS (fatal, flocp, _("Invalid function name: %s"), name);
+  if (len > 255)
+    OS (fatal, flocp, _("Function name too long: %s"), name);
+  if (min > 255)
+    ONS (fatal, flocp,
+         _("Invalid minimum argument count (%d) for function %s"), min, name);
+  if (max > 255 || (max && max < min))
+    ONS (fatal, flocp,
+         _("Invalid maximum argument count (%d) for function %s"), max, name);
+
+  ent = xmalloc (sizeof (struct function_table_entry));
+  ent->name = name;
+  ent->len = len;
+  ent->minimum_args = min;
+  ent->maximum_args = max;
+  ent->expand_args = ANY_SET(flags, GMK_FUNC_NOEXPAND) ? 0 : 1;
+  ent->alloc_fn = 1;
+  ent->fptr.alloc_func_ptr = func;
+
+  hash_insert (&function_table, ent);
+}
+
+void
+hash_init_function_table (void)
+{
+  hash_init (&function_table, FUNCTION_TABLE_ENTRIES * 2,
+             function_table_entry_hash_1, function_table_entry_hash_2,
+             function_table_entry_hash_cmp);
+  hash_load (&function_table, function_table_init,
+             FUNCTION_TABLE_ENTRIES, sizeof (struct function_table_entry));
+}
diff --git a/getloadavg.c b/getloadavg.c
new file mode 100644
index 0000000..a755b6d
--- /dev/null
+++ b/getloadavg.c
@@ -0,0 +1,1026 @@
+/* Get the system load averages.
+Copyright (C) 1985-2014 Free Software Foundation, Inc.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Compile-time symbols that this file uses:
+
+   HAVE_PSTAT_GETDYNAMIC	Define this if your system has the
+                                pstat_getdynamic function.  I think it
+				is unique to HPUX9.  The best way to get the
+				definition is through the AC_FUNC_GETLOADAVG
+				macro that comes with autoconf 2.13 or newer.
+				If that isn't an option, then just put
+				AC_CHECK_FUNCS(pstat_getdynamic) in your
+				configure.in file.
+   FIXUP_KERNEL_SYMBOL_ADDR()	Adjust address in returned struct nlist.
+   KERNEL_FILE			Pathname of the kernel to nlist.
+   LDAV_CVT()			Scale the load average from the kernel.
+				Returns a double.
+   LDAV_SYMBOL			Name of kernel symbol giving load average.
+   LOAD_AVE_TYPE		Type of the load average array in the kernel.
+				Must be defined unless one of
+				apollo, DGUX, NeXT, or UMAX is defined;
+                                or we have libkstat;
+				otherwise, no load average is available.
+   NLIST_STRUCT			Include nlist.h, not a.out.h, and
+				the nlist n_name element is a pointer,
+				not an array.
+   HAVE_STRUCT_NLIST_N_UN_N_NAME struct nlist has an n_un member, not n_name.
+   LINUX_LDAV_FILE		[__linux__]: File containing load averages.
+
+   Specific system predefines this file uses, aside from setting
+   default values if not emacs:
+
+   apollo
+   BSD				Real BSD, not just BSD-like.
+   convex
+   DGUX
+   eunice			UNIX emulator under VMS.
+   hpux
+   __MSDOS__			No-op for MSDOS.
+   NeXT
+   sgi
+   sequent			Sequent Dynix 3.x.x (BSD)
+   _SEQUENT_			Sequent DYNIX/ptx 1.x.x (SYSV)
+   sony_news                    NEWS-OS (works at least for 4.1C)
+   UMAX
+   UMAX4_3
+   VMS
+   WINDOWS32			No-op for Windows95/NT.
+   __linux__			Linux: assumes /proc filesystem mounted.
+   				Support from Michael K. Johnson.
+   __NetBSD__			NetBSD: assumes /kern filesystem mounted.
+
+   In addition, to avoid nesting many #ifdefs, we internally set
+   LDAV_DONE to indicate that the load average has been computed.
+
+   We also #define LDAV_PRIVILEGED if a program will require
+   special installation to be able to call getloadavg.  */
+
+/* This should always be first.  */
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <sys/types.h>
+
+/* Both the Emacs and non-Emacs sections want this.  Some
+   configuration files' definitions for the LOAD_AVE_CVT macro (like
+   sparc.h's) use macros like FSCALE, defined here.  */
+#if defined (unix) || defined (__unix)
+# include <sys/param.h>
+#endif
+
+
+/* Exclude all the code except the test program at the end
+   if the system has its own 'getloadavg' function.
+
+   The declaration of 'errno' is needed by the test program
+   as well as the function itself, so it comes first.  */
+
+#include <errno.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if HAVE_LOCALE_H
+# include <locale.h>
+#endif
+#if !HAVE_SETLOCALE
+# define setlocale(Category, Locale) /* empty */
+#endif
+
+#ifndef HAVE_GETLOADAVG
+
+
+/* The existing Emacs configuration files define a macro called
+   LOAD_AVE_CVT, which accepts a value of type LOAD_AVE_TYPE, and
+   returns the load average multiplied by 100.  What we actually want
+   is a macro called LDAV_CVT, which returns the load average as an
+   unmultiplied double.
+
+   For backwards compatibility, we'll define LDAV_CVT in terms of
+   LOAD_AVE_CVT, but future machine config files should just define
+   LDAV_CVT directly.  */
+
+# if !defined(LDAV_CVT) && defined(LOAD_AVE_CVT)
+#  define LDAV_CVT(n) (LOAD_AVE_CVT (n) / 100.0)
+# endif
+
+# if !defined (BSD) && defined (ultrix)
+/* Ultrix behaves like BSD on Vaxen.  */
+#  define BSD
+# endif
+
+# ifdef NeXT
+/* NeXT in the 2.{0,1,2} releases defines BSD in <sys/param.h>, which
+   conflicts with the definition understood in this file, that this
+   really is BSD. */
+#  undef BSD
+
+/* NeXT defines FSCALE in <sys/param.h>.  However, we take FSCALE being
+   defined to mean that the nlist method should be used, which is not true.  */
+#  undef FSCALE
+# endif
+
+/* Same issues as for NeXT apply to the HURD-based GNU system.  */
+# ifdef __GNU__
+#  undef BSD
+#  undef FSCALE
+# endif /* __GNU__ */
+
+/* Set values that are different from the defaults, which are
+   set a little farther down with #ifndef.  */
+
+
+/* Some shorthands.  */
+
+# if defined (HPUX) && !defined (hpux)
+#  define hpux
+# endif
+
+# if defined (__hpux) && !defined (hpux)
+#  define hpux
+# endif
+
+# if defined (__sun) && !defined (sun)
+#  define sun
+# endif
+
+# if defined(hp300) && !defined(hpux)
+#  define MORE_BSD
+# endif
+
+# if defined(ultrix) && defined(mips)
+#  define decstation
+# endif
+
+# if defined (__SVR4) && !defined (SVR4)
+#  define SVR4
+# endif
+
+# if (defined(sun) && defined(SVR4)) || defined (SOLARIS2)
+#  define SUNOS_5
+# endif
+
+# if defined (__osf__) && (defined (__alpha) || defined (__alpha__))
+#  define OSF_ALPHA
+#  include <sys/mbuf.h>
+#  include <sys/socket.h>
+#  include <net/route.h>
+#  include <sys/table.h>
+# endif
+
+# if defined (__osf__) && (defined (mips) || defined (__mips__))
+#  define OSF_MIPS
+#  include <sys/table.h>
+# endif
+
+/* UTek's /bin/cc on the 4300 has no architecture specific cpp define by
+   default, but _MACH_IND_SYS_TYPES is defined in <sys/types.h>.  Combine
+   that with a couple of other things and we'll have a unique match.  */
+# if !defined (tek4300) && defined (unix) && defined (m68k) && defined (mc68000) && defined (mc68020) && defined (_MACH_IND_SYS_TYPES)
+#  define tek4300			/* Define by emacs, but not by other users.  */
+# endif
+
+/* AC_FUNC_GETLOADAVG thinks QNX is SVR4, but it isn't. */
+# if defined(__QNX__)
+#  undef SVR4
+# endif
+
+/* VAX C can't handle multi-line #ifs, or lines longer than 256 chars.  */
+# ifndef LOAD_AVE_TYPE
+
+#  ifdef MORE_BSD
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef sun
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef decstation
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef _SEQUENT_
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef sgi
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef SVR4
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef sony_news
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef sequent
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef OSF_ALPHA
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  if defined (ardent) && defined (titan)
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef tek4300
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  if defined(alliant) && defined(i860) /* Alliant FX/2800 */
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef _AIX
+#   define LOAD_AVE_TYPE long
+#  endif
+
+#  ifdef convex
+#   define LOAD_AVE_TYPE double
+#   ifndef LDAV_CVT
+#    define LDAV_CVT(n) (n)
+#   endif
+#  endif
+
+# endif /* No LOAD_AVE_TYPE.  */
+
+# ifdef OSF_ALPHA
+/* <sys/param.h> defines an incorrect value for FSCALE on Alpha OSF/1,
+   according to ghazi@noc.rutgers.edu.  */
+#  undef FSCALE
+#  define FSCALE 1024.0
+# endif
+
+# if defined(alliant) && defined(i860) /* Alliant FX/2800 */
+/* <sys/param.h> defines an incorrect value for FSCALE on an
+   Alliant FX/2800 Concentrix 2.2, according to ghazi@noc.rutgers.edu.  */
+#  undef FSCALE
+#  define FSCALE 100.0
+# endif
+
+
+# ifndef	FSCALE
+
+/* SunOS and some others define FSCALE in sys/param.h.  */
+
+#  ifdef MORE_BSD
+#   define FSCALE 2048.0
+#  endif
+
+#  if defined(MIPS) || defined(SVR4) || defined(decstation)
+#   define FSCALE 256
+#  endif
+
+#  if defined (sgi) || defined (sequent)
+/* Sometimes both MIPS and sgi are defined, so FSCALE was just defined
+   above under #ifdef MIPS.  But we want the sgi value.  */
+#   undef FSCALE
+#   define	FSCALE 1000.0
+#  endif
+
+#  if defined (ardent) && defined (titan)
+#   define FSCALE 65536.0
+#  endif
+
+#  ifdef tek4300
+#   define FSCALE 100.0
+#  endif
+
+#  ifdef _AIX
+#   define FSCALE 65536.0
+#  endif
+
+# endif	/* Not FSCALE.  */
+
+# if !defined (LDAV_CVT) && defined (FSCALE)
+#  define	LDAV_CVT(n) (((double) (n)) / FSCALE)
+# endif
+
+
+# if defined(sgi) || (defined(mips) && !defined(BSD))
+#  define FIXUP_KERNEL_SYMBOL_ADDR(nl) ((nl)[0].n_value &= ~(1 << 31))
+# endif
+
+
+# if !defined (KERNEL_FILE) && defined (sequent)
+#  define KERNEL_FILE "/dynix"
+# endif
+
+# if !defined (KERNEL_FILE) && defined (hpux)
+#  define KERNEL_FILE "/hp-ux"
+# endif
+
+# if !defined(KERNEL_FILE) && (defined(_SEQUENT_) || defined(MIPS) || defined(SVR4) || defined(ISC) || defined (sgi) || (defined (ardent) && defined (titan)))
+#  define KERNEL_FILE "/unix"
+# endif
+
+
+# if !defined (LDAV_SYMBOL) && defined (alliant)
+#  define LDAV_SYMBOL "_Loadavg"
+# endif
+
+# if !defined(LDAV_SYMBOL) && ((defined(hpux) && !defined(hp9000s300)) || defined(_SEQUENT_) || defined(SVR4) || defined(ISC) || defined(sgi) || (defined (ardent) && defined (titan)) || defined (_AIX))
+#  define LDAV_SYMBOL "avenrun"
+# endif
+
+# ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+# endif
+
+# include <stdio.h>
+
+/* LOAD_AVE_TYPE should only get defined if we're going to use the
+   nlist method.  */
+# if !defined(LOAD_AVE_TYPE) && (defined(BSD) || defined(LDAV_CVT) || defined(KERNEL_FILE) || defined(LDAV_SYMBOL)) && !defined(__riscos__)
+#  define LOAD_AVE_TYPE double
+# endif
+
+# ifdef LOAD_AVE_TYPE
+
+#  ifndef VMS
+#   ifndef __linux__
+#    ifdef HAVE_NLIST_H
+#     include <nlist.h>
+#    else
+#     include <a.out.h>
+#    endif
+
+#    ifdef SUNOS_5
+#     include <fcntl.h>
+#     include <kvm.h>
+#     include <kstat.h>
+#    endif
+
+#    if defined (hpux) && defined (HAVE_PSTAT_GETDYNAMIC)
+#     include <sys/pstat.h>
+#    endif
+
+#    ifndef KERNEL_FILE
+#     define KERNEL_FILE "/vmunix"
+#    endif /* KERNEL_FILE */
+
+#    ifndef LDAV_SYMBOL
+#     define LDAV_SYMBOL "_avenrun"
+#    endif /* LDAV_SYMBOL */
+#   endif /* __linux__ */
+
+#  else /* VMS */
+
+#   ifndef eunice
+#    include <iodef.h>
+#    include <descrip.h>
+#   else /* eunice */
+#    include <vms/iodef.h>
+#   endif /* eunice */
+#  endif /* VMS */
+
+#  ifndef LDAV_CVT
+#   define LDAV_CVT(n) ((double) (n))
+#  endif /* !LDAV_CVT */
+
+# endif /* LOAD_AVE_TYPE */
+
+# if defined(__GNU__) && !defined (NeXT)
+/* Note that NeXT Openstep defines __GNU__ even though it should not.  */
+/* GNU system acts much like NeXT, for load average purposes,
+   but not exactly.  */
+#  define NeXT
+#  define host_self mach_host_self
+# endif
+
+# ifdef NeXT
+#  ifdef HAVE_MACH_MACH_H
+#   include <mach/mach.h>
+#  else
+#   include <mach.h>
+#  endif
+# endif /* NeXT */
+
+# ifdef sgi
+#  include <sys/sysmp.h>
+# endif /* sgi */
+
+# ifdef UMAX
+#  include <stdio.h>
+#  include <signal.h>
+#  include <sys/time.h>
+#  include <sys/wait.h>
+#  include <sys/syscall.h>
+
+#  ifdef UMAX_43
+#   include <machine/cpu.h>
+#   include <inq_stats/statistics.h>
+#   include <inq_stats/sysstats.h>
+#   include <inq_stats/cpustats.h>
+#   include <inq_stats/procstats.h>
+#  else /* Not UMAX_43.  */
+#   include <sys/sysdefs.h>
+#   include <sys/statistics.h>
+#   include <sys/sysstats.h>
+#   include <sys/cpudefs.h>
+#   include <sys/cpustats.h>
+#   include <sys/procstats.h>
+#  endif /* Not UMAX_43.  */
+# endif /* UMAX */
+
+# ifdef DGUX
+#  include <sys/dg_sys_info.h>
+# endif
+
+# if defined(HAVE_FCNTL_H) || defined(_POSIX_VERSION)
+#  include <fcntl.h>
+# else
+#  include <sys/file.h>
+# endif
+
+
+/* Avoid static vars inside a function since in HPUX they dump as pure.  */
+
+# ifdef NeXT
+static processor_set_t default_set;
+static int getloadavg_initialized;
+# endif /* NeXT */
+
+# ifdef UMAX
+static unsigned int cpus = 0;
+static unsigned int samples;
+# endif /* UMAX */
+
+# ifdef DGUX
+static struct dg_sys_info_load_info load_info;	/* what-a-mouthful! */
+# endif /* DGUX */
+
+#if !defined(HAVE_LIBKSTAT) && defined(LOAD_AVE_TYPE)
+/* File descriptor open to /dev/kmem or VMS load ave driver.  */
+static int channel;
+/* Nonzero iff channel is valid.  */
+static int getloadavg_initialized;
+/* Offset in kmem to seek to read load average, or 0 means invalid.  */
+static long offset;
+
+#if !defined(VMS) && !defined(sgi) && !defined(__linux__)
+static struct nlist nl[2];
+#endif /* Not VMS or sgi */
+
+#ifdef SUNOS_5
+static kvm_t *kd;
+#endif /* SUNOS_5 */
+
+#endif /* LOAD_AVE_TYPE && !HAVE_LIBKSTAT */
+
+/* Put the 1 minute, 5 minute and 15 minute load averages
+   into the first NELEM elements of LOADAVG.
+   Return the number written (never more than 3, but may be less than NELEM),
+   or -1 if an error occurred.  */
+
+int
+getloadavg (double loadavg[], int nelem)
+{
+  int elem = 0;			/* Return value.  */
+
+# ifdef NO_GET_LOAD_AVG
+#  define LDAV_DONE
+  /* Set errno to zero to indicate that there was no particular error;
+     this function just can't work at all on this system.  */
+  errno = 0;
+  elem = -1;
+# endif
+
+# if !defined (LDAV_DONE) && defined (HAVE_LIBKSTAT)
+/* Use libkstat because we don't have to be root.  */
+#  define LDAV_DONE
+  kstat_ctl_t *kc;
+  kstat_t *ksp;
+  kstat_named_t *kn;
+
+  kc = kstat_open ();
+  if (kc == 0)
+    return -1;
+  ksp = kstat_lookup (kc, "unix", 0, "system_misc");
+  if (ksp == 0 )
+    return -1;
+  if (kstat_read (kc, ksp, 0) == -1)
+    return -1;
+
+
+  kn = kstat_data_lookup (ksp, "avenrun_1min");
+  if (kn == 0)
+    {
+      /* Return -1 if no load average information is available.  */
+      nelem = 0;
+      elem = -1;
+    }
+
+  if (nelem >= 1)
+    loadavg[elem++] = (double) kn->value.ul/FSCALE;
+
+  if (nelem >= 2)
+    {
+      kn = kstat_data_lookup (ksp, "avenrun_5min");
+      if (kn != 0)
+	{
+	  loadavg[elem++] = (double) kn->value.ul/FSCALE;
+
+	  if (nelem >= 3)
+	    {
+	      kn = kstat_data_lookup (ksp, "avenrun_15min");
+	      if (kn != 0)
+		loadavg[elem++] = (double) kn->value.ul/FSCALE;
+	    }
+	}
+    }
+
+  kstat_close (kc);
+# endif /* HAVE_LIBKSTAT */
+
+# if !defined (LDAV_DONE) && defined (hpux) && defined (HAVE_PSTAT_GETDYNAMIC)
+/* Use pstat_getdynamic() because we don't have to be root.  */
+#  define LDAV_DONE
+#  undef LOAD_AVE_TYPE
+
+  struct pst_dynamic dyn_info;
+  if (pstat_getdynamic (&dyn_info, sizeof (dyn_info), 0, 0) < 0)
+    return -1;
+  if (nelem > 0)
+    loadavg[elem++] = dyn_info.psd_avg_1_min;
+  if (nelem > 1)
+    loadavg[elem++] = dyn_info.psd_avg_5_min;
+  if (nelem > 2)
+    loadavg[elem++] = dyn_info.psd_avg_15_min;
+
+# endif /* hpux && HAVE_PSTAT_GETDYNAMIC */
+
+# if !defined (LDAV_DONE) && defined (__linux__)
+#  define LDAV_DONE
+#  undef LOAD_AVE_TYPE
+
+#  ifndef LINUX_LDAV_FILE
+#   define LINUX_LDAV_FILE "/proc/loadavg"
+#  endif
+
+  char ldavgbuf[40];
+  double load_ave[3];
+  int fd, count;
+
+  fd = open (LINUX_LDAV_FILE, O_RDONLY);
+  if (fd == -1)
+    return -1;
+  count = read (fd, ldavgbuf, 40);
+  (void) close (fd);
+  if (count <= 0)
+    return -1;
+
+  /* The following sscanf must use the C locale.  */
+  setlocale (LC_NUMERIC, "C");
+  count = sscanf (ldavgbuf, "%lf %lf %lf",
+		  &load_ave[0], &load_ave[1], &load_ave[2]);
+  setlocale (LC_NUMERIC, "");
+  if (count < 1)
+    return -1;
+
+  for (elem = 0; elem < nelem && elem < count; elem++)
+    loadavg[elem] = load_ave[elem];
+
+  return elem;
+
+# endif /* __linux__ */
+
+# if !defined (LDAV_DONE) && defined (__NetBSD__)
+#  define LDAV_DONE
+#  undef LOAD_AVE_TYPE
+
+#  ifndef NETBSD_LDAV_FILE
+#   define NETBSD_LDAV_FILE "/kern/loadavg"
+#  endif
+
+  unsigned long int load_ave[3], scale;
+  int count;
+  FILE *fp;
+
+  fp = fopen (NETBSD_LDAV_FILE, "r");
+  if (fp == NULL)
+    return -1;
+  count = fscanf (fp, "%lu %lu %lu %lu\n",
+		  &load_ave[0], &load_ave[1], &load_ave[2],
+		  &scale);
+  (void) fclose (fp);
+  if (count != 4)
+    return -1;
+
+  for (elem = 0; elem < nelem; elem++)
+    loadavg[elem] = (double) load_ave[elem] / (double) scale;
+
+  return elem;
+
+# endif /* __NetBSD__ */
+
+# if !defined (LDAV_DONE) && defined (NeXT)
+#  define LDAV_DONE
+  /* The NeXT code was adapted from iscreen 3.2.  */
+
+  host_t host;
+  struct processor_set_basic_info info;
+  unsigned info_count;
+
+  /* We only know how to get the 1-minute average for this system,
+     so even if the caller asks for more than 1, we only return 1.  */
+
+  if (!getloadavg_initialized)
+    {
+      if (processor_set_default (host_self (), &default_set) == KERN_SUCCESS)
+	getloadavg_initialized = 1;
+    }
+
+  if (getloadavg_initialized)
+    {
+      info_count = PROCESSOR_SET_BASIC_INFO_COUNT;
+      if (processor_set_info (default_set, PROCESSOR_SET_BASIC_INFO, &host,
+			      (processor_set_info_t) &info, &info_count)
+	  != KERN_SUCCESS)
+	getloadavg_initialized = 0;
+      else
+	{
+	  if (nelem > 0)
+	    loadavg[elem++] = (double) info.load_average / LOAD_SCALE;
+	}
+    }
+
+  if (!getloadavg_initialized)
+    return -1;
+# endif /* NeXT */
+
+# if !defined (LDAV_DONE) && defined (UMAX)
+#  define LDAV_DONE
+/* UMAX 4.2, which runs on the Encore Multimax multiprocessor, does not
+   have a /dev/kmem.  Information about the workings of the running kernel
+   can be gathered with inq_stats system calls.
+   We only know how to get the 1-minute average for this system.  */
+
+  struct proc_summary proc_sum_data;
+  struct stat_descr proc_info;
+  double load;
+  register unsigned int i, j;
+
+  if (cpus == 0)
+    {
+      register unsigned int c, i;
+      struct cpu_config conf;
+      struct stat_descr desc;
+
+      desc.sd_next = 0;
+      desc.sd_subsys = SUBSYS_CPU;
+      desc.sd_type = CPUTYPE_CONFIG;
+      desc.sd_addr = (char *) &conf;
+      desc.sd_size = sizeof conf;
+
+      if (inq_stats (1, &desc))
+	return -1;
+
+      c = 0;
+      for (i = 0; i < conf.config_maxclass; ++i)
+	{
+	  struct class_stats stats;
+	  memset (&stats, '\0', sizeof stats);
+
+	  desc.sd_type = CPUTYPE_CLASS;
+	  desc.sd_objid = i;
+	  desc.sd_addr = (char *) &stats;
+	  desc.sd_size = sizeof stats;
+
+	  if (inq_stats (1, &desc))
+	    return -1;
+
+	  c += stats.class_numcpus;
+	}
+      cpus = c;
+      samples = cpus < 2 ? 3 : (2 * cpus / 3);
+    }
+
+  proc_info.sd_next = 0;
+  proc_info.sd_subsys = SUBSYS_PROC;
+  proc_info.sd_type = PROCTYPE_SUMMARY;
+  proc_info.sd_addr = (char *) &proc_sum_data;
+  proc_info.sd_size = sizeof (struct proc_summary);
+  proc_info.sd_sizeused = 0;
+
+  if (inq_stats (1, &proc_info) != 0)
+    return -1;
+
+  load = proc_sum_data.ps_nrunnable;
+  j = 0;
+  for (i = samples - 1; i > 0; --i)
+    {
+      load += proc_sum_data.ps_nrun[j];
+      if (j++ == PS_NRUNSIZE)
+	j = 0;
+    }
+
+  if (nelem > 0)
+    loadavg[elem++] = load / samples / cpus;
+# endif /* UMAX */
+
+# if !defined (LDAV_DONE) && defined (DGUX)
+#  define LDAV_DONE
+  /* This call can return -1 for an error, but with good args
+     it's not supposed to fail.  The first argument is for no
+     apparent reason of type 'long int *'.  */
+  dg_sys_info ((long int *) &load_info,
+	       DG_SYS_INFO_LOAD_INFO_TYPE,
+	       DG_SYS_INFO_LOAD_VERSION_0);
+
+  if (nelem > 0)
+    loadavg[elem++] = load_info.one_minute;
+  if (nelem > 1)
+    loadavg[elem++] = load_info.five_minute;
+  if (nelem > 2)
+    loadavg[elem++] = load_info.fifteen_minute;
+# endif /* DGUX */
+
+# if !defined (LDAV_DONE) && defined (apollo)
+#  define LDAV_DONE
+/* Apollo code from lisch@mentorg.com (Ray Lischner).
+
+   This system call is not documented.  The load average is obtained as
+   three long integers, for the load average over the past minute,
+   five minutes, and fifteen minutes.  Each value is a scaled integer,
+   with 16 bits of integer part and 16 bits of fraction part.
+
+   I'm not sure which operating system first supported this system call,
+   but I know that SR10.2 supports it.  */
+
+  extern void proc1_$get_loadav ();
+  unsigned long load_ave[3];
+
+  proc1_$get_loadav (load_ave);
+
+  if (nelem > 0)
+    loadavg[elem++] = load_ave[0] / 65536.0;
+  if (nelem > 1)
+    loadavg[elem++] = load_ave[1] / 65536.0;
+  if (nelem > 2)
+    loadavg[elem++] = load_ave[2] / 65536.0;
+# endif /* apollo */
+
+# if !defined (LDAV_DONE) && defined (OSF_MIPS)
+#  define LDAV_DONE
+
+  struct tbl_loadavg load_ave;
+  table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave));
+  loadavg[elem++]
+    = (load_ave.tl_lscale == 0
+       ? load_ave.tl_avenrun.d[0]
+       : (load_ave.tl_avenrun.l[0] / (double) load_ave.tl_lscale));
+# endif	/* OSF_MIPS */
+
+# if !defined (LDAV_DONE) && (defined (__MSDOS__) || defined (WINDOWS32))
+#  define LDAV_DONE
+
+  /* A faithful emulation is going to have to be saved for a rainy day.  */
+  for ( ; elem < nelem; elem++)
+    {
+      loadavg[elem] = 0.0;
+    }
+# endif  /* __MSDOS__ || WINDOWS32 */
+
+# if !defined (LDAV_DONE) && defined (OSF_ALPHA)
+#  define LDAV_DONE
+
+  struct tbl_loadavg load_ave;
+  table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave));
+  for (elem = 0; elem < nelem; elem++)
+    loadavg[elem]
+      = (load_ave.tl_lscale == 0
+       ? load_ave.tl_avenrun.d[elem]
+       : (load_ave.tl_avenrun.l[elem] / (double) load_ave.tl_lscale));
+# endif /* OSF_ALPHA */
+
+# if !defined (LDAV_DONE) && defined (VMS)
+  /* VMS specific code -- read from the Load Ave driver.  */
+
+  LOAD_AVE_TYPE load_ave[3];
+  static int getloadavg_initialized = 0;
+#  ifdef eunice
+  struct
+  {
+    int dsc$w_length;
+    char *dsc$a_pointer;
+  } descriptor;
+#  endif
+
+  /* Ensure that there is a channel open to the load ave device.  */
+  if (!getloadavg_initialized)
+    {
+      /* Attempt to open the channel.  */
+#  ifdef eunice
+      descriptor.dsc$w_length = 18;
+      descriptor.dsc$a_pointer = "$$VMS_LOAD_AVERAGE";
+#  else
+      $DESCRIPTOR (descriptor, "LAV0:");
+#  endif
+      if (sys$assign (&descriptor, &channel, 0, 0) & 1)
+	getloadavg_initialized = 1;
+    }
+
+  /* Read the load average vector.  */
+  if (getloadavg_initialized
+      && !(sys$qiow (0, channel, IO$_READVBLK, 0, 0, 0,
+		     load_ave, 12, 0, 0, 0, 0) & 1))
+    {
+      sys$dassgn (channel);
+      getloadavg_initialized = 0;
+    }
+
+  if (!getloadavg_initialized)
+    return -1;
+# endif /* VMS */
+
+# if !defined (LDAV_DONE) && defined(LOAD_AVE_TYPE) && !defined(VMS)
+
+  /* UNIX-specific code -- read the average from /dev/kmem.  */
+
+#  define LDAV_PRIVILEGED		/* This code requires special installation.  */
+
+  LOAD_AVE_TYPE load_ave[3];
+
+  /* Get the address of LDAV_SYMBOL.  */
+  if (offset == 0)
+    {
+#  ifndef sgi
+#   ifndef NLIST_STRUCT
+      strcpy (nl[0].n_name, LDAV_SYMBOL);
+      strcpy (nl[1].n_name, "");
+#   else /* NLIST_STRUCT */
+#    ifdef HAVE_STRUCT_NLIST_N_UN_N_NAME
+      nl[0].n_un.n_name = LDAV_SYMBOL;
+      nl[1].n_un.n_name = 0;
+#    else /* not HAVE_STRUCT_NLIST_N_UN_N_NAME */
+      nl[0].n_name = LDAV_SYMBOL;
+      nl[1].n_name = 0;
+#    endif /* not HAVE_STRUCT_NLIST_N_UN_N_NAME */
+#   endif /* NLIST_STRUCT */
+
+#   ifndef SUNOS_5
+      if (
+#    if !(defined (_AIX) && !defined (ps2))
+	  nlist (KERNEL_FILE, nl)
+#    else  /* _AIX */
+	  knlist (nl, 1, sizeof (nl[0]))
+#    endif
+	  >= 0)
+	  /* Omit "&& nl[0].n_type != 0 " -- it breaks on Sun386i.  */
+	  {
+#    ifdef FIXUP_KERNEL_SYMBOL_ADDR
+	    FIXUP_KERNEL_SYMBOL_ADDR (nl);
+#    endif
+	    offset = nl[0].n_value;
+	  }
+#   endif /* !SUNOS_5 */
+#  else  /* sgi */
+      int ldav_off;
+
+      ldav_off = sysmp (MP_KERNADDR, MPKA_AVENRUN);
+      if (ldav_off != -1)
+	offset = (long) ldav_off & 0x7fffffff;
+#  endif /* sgi */
+    }
+
+  /* Make sure we have /dev/kmem open.  */
+  if (!getloadavg_initialized)
+    {
+#  ifndef SUNOS_5
+      channel = open ("/dev/kmem", 0);
+      if (channel >= 0)
+	{
+	  /* Set the channel to close on exec, so it does not
+	     litter any child's descriptor table.  */
+#   ifdef F_SETFD
+#    ifndef FD_CLOEXEC
+#     define FD_CLOEXEC 1
+#    endif
+	  (void) fcntl (channel, F_SETFD, FD_CLOEXEC);
+#   endif
+	  getloadavg_initialized = 1;
+	}
+#  else /* SUNOS_5 */
+      /* We pass 0 for the kernel, corefile, and swapfile names
+	 to use the currently running kernel.  */
+      kd = kvm_open (0, 0, 0, O_RDONLY, 0);
+      if (kd != 0)
+	{
+	  /* nlist the currently running kernel.  */
+	  kvm_nlist (kd, nl);
+	  offset = nl[0].n_value;
+	  getloadavg_initialized = 1;
+	}
+#  endif /* SUNOS_5 */
+    }
+
+  /* If we can, get the load average values.  */
+  if (offset && getloadavg_initialized)
+    {
+      /* Try to read the load.  */
+#  ifndef SUNOS_5
+      if (lseek (channel, offset, 0) == -1L
+	  || read (channel, (char *) load_ave, sizeof (load_ave))
+	  != sizeof (load_ave))
+	{
+	  close (channel);
+	  getloadavg_initialized = 0;
+	}
+#  else  /* SUNOS_5 */
+      if (kvm_read (kd, offset, (char *) load_ave, sizeof (load_ave))
+	  != sizeof (load_ave))
+        {
+          kvm_close (kd);
+          getloadavg_initialized = 0;
+	}
+#  endif /* SUNOS_5 */
+    }
+
+  if (offset == 0 || !getloadavg_initialized)
+    return -1;
+# endif /* LOAD_AVE_TYPE and not VMS */
+
+# if !defined (LDAV_DONE) && defined (LOAD_AVE_TYPE) /* Including VMS.  */
+  if (nelem > 0)
+    loadavg[elem++] = LDAV_CVT (load_ave[0]);
+  if (nelem > 1)
+    loadavg[elem++] = LDAV_CVT (load_ave[1]);
+  if (nelem > 2)
+    loadavg[elem++] = LDAV_CVT (load_ave[2]);
+
+#  define LDAV_DONE
+# endif /* !LDAV_DONE && LOAD_AVE_TYPE */
+
+# ifdef LDAV_DONE
+  return elem;
+# else
+  /* Set errno to zero to indicate that there was no particular error;
+     this function just can't work at all on this system.  */
+  errno = 0;
+  return -1;
+# endif
+}
+
+#endif /* ! HAVE_GETLOADAVG */
+
+#ifdef TEST
+#include "makeint.h"
+
+int
+main (int argc, char **argv)
+{
+  int naptime = 0;
+
+  if (argc > 1)
+    naptime = atoi (argv[1]);
+
+  while (1)
+    {
+      double avg[3];
+      int loads;
+
+      errno = 0;		/* Don't be misled if it doesn't set errno.  */
+      loads = getloadavg (avg, 3);
+      if (loads == -1)
+	{
+	  perror ("Error getting load average");
+	  exit (1);
+	}
+      if (loads > 0)
+	printf ("1-minute: %f  ", avg[0]);
+      if (loads > 1)
+	printf ("5-minute: %f  ", avg[1]);
+      if (loads > 2)
+	printf ("15-minute: %f  ", avg[2]);
+      if (loads > 0)
+	putchar ('\n');
+
+      if (naptime == 0)
+	break;
+      sleep (naptime);
+    }
+
+  exit (0);
+}
+#endif /* TEST */
diff --git a/getopt.c b/getopt.c
new file mode 100644
index 0000000..a8051fc
--- /dev/null
+++ b/getopt.c
@@ -0,0 +1,1026 @@
+/* Getopt for GNU.
+NOTE: getopt is now part of the C library, so if you don't know what
+"Keep this file name-space clean" means, talk to drepper@gnu.org
+before changing it!
+
+Copyright (C) 1987-2014 Free Software Foundation, Inc.
+
+NOTE: The canonical source of this file is maintained with the GNU C Library.
+Bugs can be reported to bug-glibc@gnu.org.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
+   Ditto for AIX 3.2 and <stdlib.h>.  */
+#ifndef _NO_PROTO
+# define _NO_PROTO
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+   reject `defined (const)'.  */
+# ifndef const
+#  define const
+# endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+# include <gnu-versions.h>
+# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#  define ELIDE_CODE
+# endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef	__GNU_LIBRARY__
+/* Don't include stdlib.h for non-GNU C libraries because some of them
+   contain conflicting prototypes for getopt.  */
+# include <stdlib.h>
+# include <unistd.h>
+#endif	/* GNU C library.  */
+
+#ifdef VMS
+# include <unixlib.h>
+# if HAVE_STRING_H - 0
+#  include <string.h>
+# endif
+#endif
+
+/* This is for other GNU distributions with internationalized messages.
+   When compiling libc, the _ macro is predefined.  */
+#include "gettext.h"
+#define _(msgid)    gettext (msgid)
+
+
+/* This version of `getopt' appears to the caller like standard Unix 'getopt'
+   but it behaves differently for the user, since it allows the user
+   to intersperse the options with the other arguments.
+
+   As `getopt' works, it permutes the elements of ARGV so that,
+   when it is done, all the options precede everything else.  Thus
+   all application programs are extended to handle flexible argument order.
+
+   Setting the environment variable POSIXLY_CORRECT disables permutation.
+   Then the behavior is completely standard.
+
+   GNU application programs can use a third alternative mode in which
+   they can distinguish the relative order of options and other arguments.  */
+
+#include "getopt.h"
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+char *optarg = NULL;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+/* 1003.2 says this must be 1 before any call.  */
+int optind = 1;
+
+/* Formerly, initialization of getopt depended on optind==0, which
+   causes problems with re-calling getopt as programs generally don't
+   know that. */
+
+int __getopt_initialized = 0;
+
+/* The next char to be scanned in the option-element
+   in which the last option character we returned was found.
+   This allows us to pick up the scan where we left off.
+
+   If this is zero, or a null string, it means resume the scan
+   by advancing to the next ARGV-element.  */
+
+static char *nextchar;
+
+/* Callers store zero here to inhibit the error message
+   for unrecognized options.  */
+
+int opterr = 1;
+
+/* Set to an option character which was unrecognized.
+   This must be initialized on some systems to avoid linking in the
+   system's own getopt implementation.  */
+
+int optopt = '?';
+
+/* Describe how to deal with options that follow non-option ARGV-elements.
+
+   If the caller did not specify anything,
+   the default is REQUIRE_ORDER if the environment variable
+   POSIXLY_CORRECT is defined, PERMUTE otherwise.
+
+   REQUIRE_ORDER means don't recognize them as options;
+   stop option processing when the first non-option is seen.
+   This is what Unix does.
+   This mode of operation is selected by either setting the environment
+   variable POSIXLY_CORRECT, or using `+' as the first character
+   of the list of option characters.
+
+   PERMUTE is the default.  We permute the contents of ARGV as we scan,
+   so that eventually all the non-options are at the end.  This allows options
+   to be given in any order, even with programs that were not written to
+   expect this.
+
+   RETURN_IN_ORDER is an option available to programs that were written
+   to expect options and other ARGV-elements in any order and that care about
+   the ordering of the two.  We describe each non-option ARGV-element
+   as if it were the argument of an option with character code 1.
+   Using `-' as the first character of the list of option characters
+   selects this mode of operation.
+
+   The special argument `--' forces an end of option-scanning regardless
+   of the value of `ordering'.  In the case of RETURN_IN_ORDER, only
+   `--' can cause `getopt' to return -1 with `optind' != ARGC.  */
+
+static enum
+{
+  REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
+} ordering;
+
+/* Value of POSIXLY_CORRECT environment variable.  */
+static char *posixly_correct;
+
+#ifdef	__GNU_LIBRARY__
+/* We want to avoid inclusion of string.h with non-GNU libraries
+   because there are many ways it can cause trouble.
+   On some systems, it contains special magic macros that don't work
+   in GCC.  */
+# include <string.h>
+# define my_index	strchr
+#else
+
+# if HAVE_STRING_H
+#  include <string.h>
+# else
+#  include <strings.h>
+# endif
+
+/* Avoid depending on library functions or files
+   whose names are inconsistent.  */
+
+#ifndef getenv
+extern char *getenv ();
+#endif
+
+static char *
+my_index (const char *str, int chr)
+{
+  while (*str)
+    {
+      if (*str == chr)
+	return (char *) str;
+      str++;
+    }
+  return 0;
+}
+
+/* If using GCC, we can safely declare strlen this way.
+   If not using GCC, it is ok not to declare it.  */
+#ifdef __GNUC__
+/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
+   That was relevant to code that was here before.  */
+# if (!defined __STDC__ || !__STDC__) && !defined strlen
+/* gcc with -traditional declares the built-in strlen to return int,
+   and has done so at least since version 2.4.5. -- rms.  */
+extern int strlen (const char *);
+# endif /* not __STDC__ */
+#endif /* __GNUC__ */
+
+#endif /* not __GNU_LIBRARY__ */
+
+/* Handle permutation of arguments.  */
+
+/* Describe the part of ARGV that contains non-options that have
+   been skipped.  `first_nonopt' is the index in ARGV of the first of them;
+   `last_nonopt' is the index after the last of them.  */
+
+static int first_nonopt;
+static int last_nonopt;
+
+#ifdef _LIBC
+/* Bash 2.0 gives us an environment variable containing flags
+   indicating ARGV elements that should not be considered arguments.  */
+
+/* Defined in getopt_init.c  */
+extern char *__getopt_nonoption_flags;
+
+static int nonoption_flags_max_len;
+static int nonoption_flags_len;
+
+static int original_argc;
+static char *const *original_argv;
+
+/* Make sure the environment variable bash 2.0 puts in the environment
+   is valid for the getopt call we must make sure that the ARGV passed
+   to getopt is that one passed to the process.  */
+static void __attribute__ ((unused))
+store_args_and_env (int argc, char *const *argv)
+{
+  /* XXX This is no good solution.  We should rather copy the args so
+     that we can compare them later.  But we must not use malloc(3).  */
+  original_argc = argc;
+  original_argv = argv;
+}
+# ifdef text_set_element
+text_set_element (__libc_subinit, store_args_and_env);
+# endif /* text_set_element */
+
+# define SWAP_FLAGS(ch1, ch2) \
+  if (nonoption_flags_len > 0)						      \
+    {									      \
+      char __tmp = __getopt_nonoption_flags[ch1];			      \
+      __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2];	      \
+      __getopt_nonoption_flags[ch2] = __tmp;				      \
+    }
+#else	/* !_LIBC */
+# define SWAP_FLAGS(ch1, ch2)
+#endif	/* _LIBC */
+
+/* Exchange two adjacent subsequences of ARGV.
+   One subsequence is elements [first_nonopt,last_nonopt)
+   which contains all the non-options that have been skipped so far.
+   The other is elements [last_nonopt,optind), which contains all
+   the options processed since those non-options were skipped.
+
+   `first_nonopt' and `last_nonopt' are relocated so that they describe
+   the new indices of the non-options in ARGV after they are moved.  */
+
+#if defined __STDC__ && __STDC__
+static void exchange (char **);
+#endif
+
+static void
+exchange (char **argv)
+{
+  int bottom = first_nonopt;
+  int middle = last_nonopt;
+  int top = optind;
+  char *tem;
+
+  /* Exchange the shorter segment with the far end of the longer segment.
+     That puts the shorter segment into the right place.
+     It leaves the longer segment in the right place overall,
+     but it consists of two parts that need to be swapped next.  */
+
+#ifdef _LIBC
+  /* First make sure the handling of the `__getopt_nonoption_flags'
+     string can work normally.  Our top argument must be in the range
+     of the string.  */
+  if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len)
+    {
+      /* We must extend the array.  The user plays games with us and
+	 presents new arguments.  */
+      char *new_str = malloc (top + 1);
+      if (new_str == NULL)
+	nonoption_flags_len = nonoption_flags_max_len = 0;
+      else
+	{
+	  memset (__mempcpy (new_str, __getopt_nonoption_flags,
+			     nonoption_flags_max_len),
+		  '\0', top + 1 - nonoption_flags_max_len);
+	  nonoption_flags_max_len = top + 1;
+	  __getopt_nonoption_flags = new_str;
+	}
+    }
+#endif
+
+  while (top > middle && middle > bottom)
+    {
+      if (top - middle > middle - bottom)
+	{
+	  /* Bottom segment is the short one.  */
+	  int len = middle - bottom;
+	  register int i;
+
+	  /* Swap it with the top part of the top segment.  */
+	  for (i = 0; i < len; i++)
+	    {
+	      tem = argv[bottom + i];
+	      argv[bottom + i] = argv[top - (middle - bottom) + i];
+	      argv[top - (middle - bottom) + i] = tem;
+	      SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
+	    }
+	  /* Exclude the moved bottom segment from further swapping.  */
+	  top -= len;
+	}
+      else
+	{
+	  /* Top segment is the short one.  */
+	  int len = top - middle;
+	  register int i;
+
+	  /* Swap it with the bottom part of the bottom segment.  */
+	  for (i = 0; i < len; i++)
+	    {
+	      tem = argv[bottom + i];
+	      argv[bottom + i] = argv[middle + i];
+	      argv[middle + i] = tem;
+	      SWAP_FLAGS (bottom + i, middle + i);
+	    }
+	  /* Exclude the moved top segment from further swapping.  */
+	  bottom += len;
+	}
+    }
+
+  /* Update records for the slots the non-options now occupy.  */
+
+  first_nonopt += (optind - last_nonopt);
+  last_nonopt = optind;
+}
+
+/* Initialize the internal data when the first call is made.  */
+
+#if defined __STDC__ && __STDC__
+static const char *_getopt_initialize (int, char *const *, const char *);
+#endif
+static const char *
+_getopt_initialize (int argc, char *const *argv, const char *optstring)
+{
+  /* Start processing options with ARGV-element 1 (since ARGV-element 0
+     is the program name); the sequence of previously skipped
+     non-option ARGV-elements is empty.  */
+
+  first_nonopt = last_nonopt = optind;
+
+  nextchar = NULL;
+
+  posixly_correct = getenv ("POSIXLY_CORRECT");
+
+  /* Determine how to handle the ordering of options and nonoptions.  */
+
+  if (optstring[0] == '-')
+    {
+      ordering = RETURN_IN_ORDER;
+      ++optstring;
+    }
+  else if (optstring[0] == '+')
+    {
+      ordering = REQUIRE_ORDER;
+      ++optstring;
+    }
+  else if (posixly_correct != NULL)
+    ordering = REQUIRE_ORDER;
+  else
+    ordering = PERMUTE;
+
+#ifdef _LIBC
+  if (posixly_correct == NULL
+      && argc == original_argc && argv == original_argv)
+    {
+      if (nonoption_flags_max_len == 0)
+	{
+	  if (__getopt_nonoption_flags == NULL
+	      || __getopt_nonoption_flags[0] == '\0')
+	    nonoption_flags_max_len = -1;
+	  else
+	    {
+	      const char *orig_str = __getopt_nonoption_flags;
+	      int len = nonoption_flags_max_len = strlen (orig_str);
+	      if (nonoption_flags_max_len < argc)
+		nonoption_flags_max_len = argc;
+	      __getopt_nonoption_flags =
+		(char *) malloc (nonoption_flags_max_len);
+	      if (__getopt_nonoption_flags == NULL)
+		nonoption_flags_max_len = -1;
+	      else
+		memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
+			'\0', nonoption_flags_max_len - len);
+	    }
+	}
+      nonoption_flags_len = nonoption_flags_max_len;
+    }
+  else
+    nonoption_flags_len = 0;
+#endif
+
+  return optstring;
+}
+
+/* Scan elements of ARGV (whose length is ARGC) for option characters
+   given in OPTSTRING.
+
+   If an element of ARGV starts with '-', and is not exactly "-" or "--",
+   then it is an option element.  The characters of this element
+   (aside from the initial '-') are option characters.  If `getopt'
+   is called repeatedly, it returns successively each of the option characters
+   from each of the option elements.
+
+   If `getopt' finds another option character, it returns that character,
+   updating `optind' and `nextchar' so that the next call to `getopt' can
+   resume the scan with the following option character or ARGV-element.
+
+   If there are no more option characters, `getopt' returns -1.
+   Then `optind' is the index in ARGV of the first ARGV-element
+   that is not an option.  (The ARGV-elements have been permuted
+   so that those that are not options now come last.)
+
+   OPTSTRING is a string containing the legitimate option characters.
+   If an option character is seen that is not listed in OPTSTRING,
+   return '?' after printing an error message.  If you set `opterr' to
+   zero, the error message is suppressed but we still return '?'.
+
+   If a char in OPTSTRING is followed by a colon, that means it wants an arg,
+   so the following text in the same ARGV-element, or the text of the following
+   ARGV-element, is returned in `optarg'.  Two colons mean an option that
+   wants an optional arg; if there is text in the current ARGV-element,
+   it is returned in `optarg', otherwise `optarg' is set to zero.
+
+   If OPTSTRING starts with `-' or `+', it requests different methods of
+   handling the non-option ARGV-elements.
+   See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
+
+   Long-named options begin with `--' instead of `-'.
+   Their names may be abbreviated as long as the abbreviation is unique
+   or is an exact match for some defined option.  If they have an
+   argument, it follows the option name in the same ARGV-element, separated
+   from the option name by a `=', or else the in next ARGV-element.
+   When `getopt' finds a long-named option, it returns 0 if that option's
+   `flag' field is nonzero, the value of the option's `val' field
+   if the `flag' field is zero.
+
+   The elements of ARGV aren't really const, because we permute them.
+   But we pretend they're const in the prototype to be compatible
+   with other systems.
+
+   LONGOPTS is a vector of `struct option' terminated by an
+   element containing a name which is zero.
+
+   LONGIND returns the index in LONGOPT of the long-named option found.
+   It is only valid when a long-named option has been found by the most
+   recent call.
+
+   If LONG_ONLY is nonzero, '-' as well as '--' can introduce
+   long-named options.  */
+
+int
+_getopt_internal (int argc, char *const *argv, const char *optstring,
+                  const struct option *longopts, int *longind, int long_only)
+{
+  optarg = NULL;
+
+  if (optind == 0 || !__getopt_initialized)
+    {
+      if (optind == 0)
+	optind = 1;	/* Don't scan ARGV[0], the program name.  */
+      optstring = _getopt_initialize (argc, argv, optstring);
+      __getopt_initialized = 1;
+    }
+
+  /* Test whether ARGV[optind] points to a non-option argument.
+     Either it does not have option syntax, or there is an environment flag
+     from the shell indicating it is not an option.  The later information
+     is only used when the used in the GNU libc.  */
+#ifdef _LIBC
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0'	      \
+		      || (optind < nonoption_flags_len			      \
+			  && __getopt_nonoption_flags[optind] == '1'))
+#else
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0')
+#endif
+
+  if (nextchar == NULL || *nextchar == '\0')
+    {
+      /* Advance to the next ARGV-element.  */
+
+      /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
+	 moved back by the user (who may also have changed the arguments).  */
+      if (last_nonopt > optind)
+	last_nonopt = optind;
+      if (first_nonopt > optind)
+	first_nonopt = optind;
+
+      if (ordering == PERMUTE)
+	{
+	  /* If we have just processed some options following some non-options,
+	     exchange them so that the options come first.  */
+
+	  if (first_nonopt != last_nonopt && last_nonopt != optind)
+	    exchange ((char **) argv);
+	  else if (last_nonopt != optind)
+	    first_nonopt = optind;
+
+	  /* Skip any additional non-options
+	     and extend the range of non-options previously skipped.  */
+
+	  while (optind < argc && NONOPTION_P)
+	    optind++;
+	  last_nonopt = optind;
+	}
+
+      /* The special ARGV-element `--' means premature end of options.
+	 Skip it like a null option,
+	 then exchange with previous non-options as if it were an option,
+	 then skip everything else like a non-option.  */
+
+      if (optind != argc && !strcmp (argv[optind], "--"))
+	{
+	  optind++;
+
+	  if (first_nonopt != last_nonopt && last_nonopt != optind)
+	    exchange ((char **) argv);
+	  else if (first_nonopt == last_nonopt)
+	    first_nonopt = optind;
+	  last_nonopt = argc;
+
+	  optind = argc;
+	}
+
+      /* If we have done all the ARGV-elements, stop the scan
+	 and back over any non-options that we skipped and permuted.  */
+
+      if (optind == argc)
+	{
+	  /* Set the next-arg-index to point at the non-options
+	     that we previously skipped, so the caller will digest them.  */
+	  if (first_nonopt != last_nonopt)
+	    optind = first_nonopt;
+	  return -1;
+	}
+
+      /* If we have come to a non-option and did not permute it,
+	 either stop the scan or describe it to the caller and pass it by.  */
+
+      if (NONOPTION_P)
+	{
+	  if (ordering == REQUIRE_ORDER)
+	    return -1;
+	  optarg = argv[optind++];
+	  return 1;
+	}
+
+      /* We have found another option-ARGV-element.
+	 Skip the initial punctuation.  */
+
+      nextchar = (argv[optind] + 1
+		  + (longopts != NULL && argv[optind][1] == '-'));
+    }
+
+  /* Decode the current option-ARGV-element.  */
+
+  /* Check whether the ARGV-element is a long option.
+
+     If long_only and the ARGV-element has the form "-f", where f is
+     a valid short option, don't consider it an abbreviated form of
+     a long option that starts with f.  Otherwise there would be no
+     way to give the -f short option.
+
+     On the other hand, if there's a long option "fubar" and
+     the ARGV-element is "-fu", do consider that an abbreviation of
+     the long option, just like "--fu", and not "-f" with arg "u".
+
+     This distinction seems to be the most useful approach.  */
+
+  if (longopts != NULL
+      && (argv[optind][1] == '-'
+	  || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
+    {
+      char *nameend;
+      const struct option *p;
+      const struct option *pfound = NULL;
+      int exact = 0;
+      int ambig = 0;
+      int indfound = -1;
+      int option_index;
+
+      for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
+	/* Do nothing.  */ ;
+
+      /* Test all long options for either exact match
+	 or abbreviated matches.  */
+      for (p = longopts, option_index = 0; p->name; p++, option_index++)
+	if (!strncmp (p->name, nextchar, nameend - nextchar))
+	  {
+	    if ((unsigned int) (nameend - nextchar)
+		== (unsigned int) strlen (p->name))
+	      {
+		/* Exact match found.  */
+		pfound = p;
+		indfound = option_index;
+		exact = 1;
+		break;
+	      }
+	    else if (pfound == NULL)
+	      {
+		/* First nonexact match found.  */
+		pfound = p;
+		indfound = option_index;
+	      }
+	    else
+	      /* Second or later nonexact match found.  */
+	      ambig = 1;
+	  }
+
+      if (ambig && !exact)
+	{
+	  if (opterr)
+	    fprintf (stderr, _("%s: option '%s' is ambiguous\n"),
+		     argv[0], argv[optind]);
+	  nextchar += strlen (nextchar);
+	  optind++;
+	  optopt = 0;
+	  return '?';
+	}
+
+      if (pfound != NULL)
+	{
+	  option_index = indfound;
+	  optind++;
+	  if (*nameend)
+	    {
+	      /* Don't test has_arg with >, because some C compilers don't
+		 allow it to be used on enums.  */
+	      if (pfound->has_arg)
+		optarg = nameend + 1;
+	      else
+		{
+		  if (opterr)
+		   if (argv[optind - 1][1] == '-')
+		    /* --option */
+		    fprintf (stderr,
+		     _("%s: option '--%s' doesn't allow an argument\n"),
+		     argv[0], pfound->name);
+		   else
+		    /* +option or -option */
+		    fprintf (stderr,
+		     _("%s: option '%c%s' doesn't allow an argument\n"),
+		     argv[0], argv[optind - 1][0], pfound->name);
+
+		  nextchar += strlen (nextchar);
+
+		  optopt = pfound->val;
+		  return '?';
+		}
+	    }
+	  else if (pfound->has_arg == 1)
+	    {
+	      if (optind < argc)
+		optarg = argv[optind++];
+	      else
+		{
+		  if (opterr)
+		    fprintf (stderr,
+			   _("%s: option '%s' requires an argument\n"),
+			   argv[0], argv[optind - 1]);
+		  nextchar += strlen (nextchar);
+		  optopt = pfound->val;
+		  return optstring[0] == ':' ? ':' : '?';
+		}
+	    }
+	  nextchar += strlen (nextchar);
+	  if (longind != NULL)
+	    *longind = option_index;
+	  if (pfound->flag)
+	    {
+	      *(pfound->flag) = pfound->val;
+	      return 0;
+	    }
+	  return pfound->val;
+	}
+
+      /* Can't find it as a long option.  If this is not getopt_long_only,
+	 or the option starts with '--' or is not a valid short
+	 option, then it's an error.
+	 Otherwise interpret it as a short option.  */
+      if (!long_only || argv[optind][1] == '-'
+	  || my_index (optstring, *nextchar) == NULL)
+	{
+	  if (opterr)
+	    {
+	      if (argv[optind][1] == '-')
+		/* --option */
+		fprintf (stderr, _("%s: unrecognized option '--%s'\n"),
+			 argv[0], nextchar);
+	      else
+		/* +option or -option */
+		fprintf (stderr, _("%s: unrecognized option '%c%s'\n"),
+			 argv[0], argv[optind][0], nextchar);
+	    }
+	  nextchar = (char *) "";
+	  optind++;
+	  optopt = 0;
+	  return '?';
+	}
+    }
+
+  /* Look at and handle the next short option-character.  */
+
+  {
+    char c = *nextchar++;
+    char *temp = my_index (optstring, c);
+
+    /* Increment `optind' when we start to process its last character.  */
+    if (*nextchar == '\0')
+      ++optind;
+
+    if (temp == NULL || c == ':')
+      {
+	if (opterr)
+	  {
+	    if (posixly_correct)
+	      /* 1003.2 specifies the format of this message.  */
+	      fprintf (stderr, _("%s: illegal option -- %c\n"),
+		       argv[0], c);
+	    else
+	      fprintf (stderr, _("%s: invalid option -- %c\n"),
+		       argv[0], c);
+	  }
+	optopt = c;
+	return '?';
+      }
+    /* Convenience. Treat POSIX -W foo same as long option --foo */
+    if (temp[0] == 'W' && temp[1] == ';')
+      {
+	char *nameend;
+	const struct option *p;
+	const struct option *pfound = NULL;
+	int exact = 0;
+	int ambig = 0;
+	int indfound = 0;
+	int option_index;
+
+	/* This is an option that requires an argument.  */
+	if (*nextchar != '\0')
+	  {
+	    optarg = nextchar;
+	    /* If we end this ARGV-element by taking the rest as an arg,
+	       we must advance to the next element now.  */
+	    optind++;
+	  }
+	else if (optind == argc)
+	  {
+	    if (opterr)
+	      {
+		/* 1003.2 specifies the format of this message.  */
+		fprintf (stderr, _("%s: option requires an argument -- %c\n"),
+			 argv[0], c);
+	      }
+	    optopt = c;
+	    if (optstring[0] == ':')
+	      c = ':';
+	    else
+	      c = '?';
+	    return c;
+	  }
+	else
+	  /* We already incremented `optind' once;
+	     increment it again when taking next ARGV-elt as argument.  */
+	  optarg = argv[optind++];
+
+	/* optarg is now the argument, see if it's in the
+	   table of longopts.  */
+
+	for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++)
+	  /* Do nothing.  */ ;
+
+	/* Test all long options for either exact match
+	   or abbreviated matches.  */
+	for (p = longopts, option_index = 0; p->name; p++, option_index++)
+	  if (!strncmp (p->name, nextchar, nameend - nextchar))
+	    {
+	      if ((unsigned int) (nameend - nextchar) == strlen (p->name))
+		{
+		  /* Exact match found.  */
+		  pfound = p;
+		  indfound = option_index;
+		  exact = 1;
+		  break;
+		}
+	      else if (pfound == NULL)
+		{
+		  /* First nonexact match found.  */
+		  pfound = p;
+		  indfound = option_index;
+		}
+	      else
+		/* Second or later nonexact match found.  */
+		ambig = 1;
+	    }
+	if (ambig && !exact)
+	  {
+	    if (opterr)
+	      fprintf (stderr, _("%s: option '-W %s' is ambiguous\n"),
+		       argv[0], argv[optind]);
+	    nextchar += strlen (nextchar);
+	    optind++;
+	    return '?';
+	  }
+	if (pfound != NULL)
+	  {
+	    option_index = indfound;
+	    if (*nameend)
+	      {
+		/* Don't test has_arg with >, because some C compilers don't
+		   allow it to be used on enums.  */
+		if (pfound->has_arg)
+		  optarg = nameend + 1;
+		else
+		  {
+		    if (opterr)
+		      fprintf (stderr, _("\
+%s: option '-W %s' doesn't allow an argument\n"),
+			       argv[0], pfound->name);
+
+		    nextchar += strlen (nextchar);
+		    return '?';
+		  }
+	      }
+	    else if (pfound->has_arg == 1)
+	      {
+		if (optind < argc)
+		  optarg = argv[optind++];
+		else
+		  {
+		    if (opterr)
+		      fprintf (stderr,
+			       _("%s: option '%s' requires an argument\n"),
+			       argv[0], argv[optind - 1]);
+		    nextchar += strlen (nextchar);
+		    return optstring[0] == ':' ? ':' : '?';
+		  }
+	      }
+	    nextchar += strlen (nextchar);
+	    if (longind != NULL)
+	      *longind = option_index;
+	    if (pfound->flag)
+	      {
+		*(pfound->flag) = pfound->val;
+		return 0;
+	      }
+	    return pfound->val;
+	  }
+	  nextchar = NULL;
+	  return 'W';	/* Let the application handle it.   */
+      }
+    if (temp[1] == ':')
+      {
+	if (temp[2] == ':')
+	  {
+	    /* This is an option that accepts an argument optionally.  */
+	    if (*nextchar != '\0')
+	      {
+		optarg = nextchar;
+		optind++;
+	      }
+	    else
+	      optarg = NULL;
+	    nextchar = NULL;
+	  }
+	else
+	  {
+	    /* This is an option that requires an argument.  */
+	    if (*nextchar != '\0')
+	      {
+		optarg = nextchar;
+		/* If we end this ARGV-element by taking the rest as an arg,
+		   we must advance to the next element now.  */
+		optind++;
+	      }
+	    else if (optind == argc)
+	      {
+		if (opterr)
+		  {
+		    /* 1003.2 specifies the format of this message.  */
+		    fprintf (stderr,
+			   _("%s: option requires an argument -- %c\n"),
+			   argv[0], c);
+		  }
+		optopt = c;
+		if (optstring[0] == ':')
+		  c = ':';
+		else
+		  c = '?';
+	      }
+	    else
+	      /* We already incremented `optind' once;
+		 increment it again when taking next ARGV-elt as argument.  */
+	      optarg = argv[optind++];
+	    nextchar = NULL;
+	  }
+      }
+    return c;
+  }
+}
+
+int
+getopt (int argc, char *const *argv, const char *optstring)
+{
+  return _getopt_internal (argc, argv, optstring,
+			   (const struct option *) 0,
+			   (int *) 0,
+			   0);
+}
+
+#endif	/* Not ELIDE_CODE.  */
+
+#ifdef TEST
+
+/* Compile with -DTEST to make an executable for use in testing
+   the above definition of `getopt'.  */
+
+int
+main (int argc, char **argv)
+{
+  int c;
+  int digit_optind = 0;
+
+  while (1)
+    {
+      int this_option_optind = optind ? optind : 1;
+
+      c = getopt (argc, argv, "abc:d:0123456789");
+      if (c == -1)
+	break;
+
+      switch (c)
+	{
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_optind != 0 && digit_optind != this_option_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_optind = this_option_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value '%s'\n", optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (optind < argc)
+	printf ("%s ", argv[optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */
diff --git a/getopt.h b/getopt.h
new file mode 100644
index 0000000..adef9a5
--- /dev/null
+++ b/getopt.h
@@ -0,0 +1,130 @@
+/* Declarations for getopt.
+Copyright (C) 1989-2014 Free Software Foundation, Inc.
+
+NOTE: The canonical source of this file is maintained with the GNU C Library.
+Bugs can be reported to bug-glibc@gnu.org.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _GETOPT_H
+#define _GETOPT_H 1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+   for unrecognized options.  */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized.  */
+
+extern int optopt;
+
+/* Describe the long-named options requested by the application.
+   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+   of `struct option' terminated by an element containing a name which is
+   zero.
+
+   The field `has_arg' is:
+   no_argument		(or 0) if the option does not take an argument,
+   required_argument	(or 1) if the option requires an argument,
+   optional_argument 	(or 2) if the option takes an optional argument.
+
+   If the field `flag' is not NULL, it points to a variable that is set
+   to the value given in the field `val' when the option is found, but
+   left unchanged if the option is not found.
+
+   To have a long-named option do something other than set an `int' to
+   a compiled-in constant, such as set a value from `optarg', set the
+   option's `flag' field to zero and its `val' field to a nonzero
+   value (the equivalent single-letter option character, if there is
+   one).  For long options that have a zero `flag' field, `getopt'
+   returns the contents of the `val' field.  */
+
+struct option
+{
+#if defined (__STDC__) && __STDC__
+  const char *name;
+#else
+  char *name;
+#endif
+  /* has_arg can't be an enum because some compilers complain about
+     type mismatches in all the code that assumes it is an int.  */
+  int has_arg;
+  int *flag;
+  int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'.  */
+
+#define	no_argument		0
+#define required_argument	1
+#define optional_argument	2
+
+#if defined (__STDC__) && __STDC__
+#ifdef __GNU_LIBRARY__
+/* Many other libraries have conflicting prototypes for getopt, with
+   differences in the consts, in stdlib.h.  To avoid compilation
+   errors, only prototype getopt for the GNU C library.  */
+extern int getopt (int argc, char *const *argv, const char *shortopts);
+#else /* not __GNU_LIBRARY__ */
+extern int getopt ();
+#endif /* __GNU_LIBRARY__ */
+extern int getopt_long (int argc, char *const *argv, const char *shortopts,
+		        const struct option *longopts, int *longind);
+extern int getopt_long_only (int argc, char *const *argv,
+			     const char *shortopts,
+		             const struct option *longopts, int *longind);
+
+/* Internal only.  Users should not call this directly.  */
+extern int _getopt_internal (int argc, char *const *argv,
+			     const char *shortopts,
+		             const struct option *longopts, int *longind,
+			     int long_only);
+#else /* not __STDC__ */
+extern int getopt ();
+extern int getopt_long ();
+extern int getopt_long_only ();
+
+extern int _getopt_internal ();
+#endif /* __STDC__ */
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* getopt.h */
diff --git a/getopt1.c b/getopt1.c
new file mode 100644
index 0000000..42dea22
--- /dev/null
+++ b/getopt1.c
@@ -0,0 +1,176 @@
+/* getopt_long and getopt_long_only entry points for GNU getopt.
+Copyright (C) 1987-1994, 1996-2014 Free Software Foundation, Inc.
+
+NOTE: The canonical source of this file is maintained with the GNU C Library.
+Bugs can be reported to bug-glibc@gnu.org.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "getopt.h"
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+   reject `defined (const)'.  */
+#ifndef const
+#define const
+#endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+#include <gnu-versions.h>
+#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#define ELIDE_CODE
+#endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
+#endif
+
+#ifndef	NULL
+#define NULL 0
+#endif
+
+int
+getopt_long (int argc, char *const *argv, const char *options,
+             const struct option *long_options, int *opt_index)
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
+}
+
+/* Like getopt_long, but '-' as well as '--' can indicate a long option.
+   If an option that starts with '-' (not '--') doesn't match a long option,
+   but does match a short option, it is parsed as a short option
+   instead.  */
+
+int
+getopt_long_only (int argc, char *const *argv, const char *options,
+                  const struct option *long_options, int *opt_index)
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
+}
+
+
+#endif	/* Not ELIDE_CODE.  */
+
+#ifdef TEST
+
+#include <stdio.h>
+
+int
+main (int argc, char **argv)
+{
+  int c;
+  int digit_optind = 0;
+
+  while (1)
+    {
+      int this_option_optind = optind ? optind : 1;
+      int option_index = 0;
+      static struct option long_options[] =
+      {
+	{"add", 1, 0, 0},
+	{"append", 0, 0, 0},
+	{"delete", 1, 0, 0},
+	{"verbose", 0, 0, 0},
+	{"create", 0, 0, 0},
+	{"file", 1, 0, 0},
+	{0, 0, 0, 0}
+      };
+
+      c = getopt_long (argc, argv, "abc:d:0123456789",
+		       long_options, &option_index);
+      if (c == -1)
+	break;
+
+      switch (c)
+	{
+	case 0:
+	  printf ("option %s", long_options[option_index].name);
+	  if (optarg)
+	    printf (" with arg %s", optarg);
+	  printf ("\n");
+	  break;
+
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_optind != 0 && digit_optind != this_option_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_optind = this_option_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value '%s'\n", optarg);
+	  break;
+
+	case 'd':
+	  printf ("option d with value '%s'\n", optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (optind < argc)
+	printf ("%s ", argv[optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */
diff --git a/gettext.h b/gettext.h
new file mode 100644
index 0000000..c2030ff
--- /dev/null
+++ b/gettext.h
@@ -0,0 +1,57 @@
+/* Convenience header for conditional use of GNU <libintl.h>.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option.  */
+#if ENABLE_NLS
+
+/* Get declarations of GNU message catalog functions.  */
+# include <libintl.h>
+
+#else
+
+/* Disabled NLS.
+   The casts to 'const char *' serve the purpose of producing warnings
+   for invalid uses of the value returned from these functions.
+   On pre-ANSI systems without 'const', the config.h file is supposed to
+   contain "#define const".  */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
+
+#endif
+
+/* A pseudo function call that serves as a marker for the automated
+   extraction of messages, but does not call gettext().  The run-time
+   translation is done at a different place in the code.
+   The argument, String, should be a literal string.  Concatenated strings
+   and other string expressions won't work.
+   The macro's expansion is not parenthesized, so that it is suitable as
+   initializer for static 'char[]' or 'const char[]' variables.  */
+#define gettext_noop(String) String
+
+#endif /* _LIBGETTEXT_H */
diff --git a/glob/COPYING.LIB b/glob/COPYING.LIB
new file mode 100644
index 0000000..bbe3fe1
--- /dev/null
+++ b/glob/COPYING.LIB
@@ -0,0 +1,481 @@
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1991 Free Software Foundation, Inc.
+                    675 Mass Ave, Cambridge, MA 02139, USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the library GPL.  It is
+ numbered 2 because it goes with version 2 of the ordinary GPL.]
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Library General Public License, applies to some
+specially designated Free Software Foundation software, and to any
+other libraries whose authors decide to use it.  You can use it for
+your libraries, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if
+you distribute copies of the library, or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link a program with the library, you must provide
+complete object files to the recipients so that they can relink them
+with the library, after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  Our method of protecting your rights has two steps: (1) copyright
+the library, and (2) offer you this license which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this free
+library.  If the library is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original
+version, so that any problems introduced by others will not reflect on
+the original authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that companies distributing free
+software will individually obtain patent licenses, thus in effect
+transforming the program into proprietary software.  To prevent this,
+we have made it clear that any patent must be licensed for everyone's
+free use or not licensed at all.
+
+  Most GNU software, including some libraries, is covered by the ordinary
+GNU General Public License, which was designed for utility programs.  This
+license, the GNU Library General Public License, applies to certain
+designated libraries.  This license is quite different from the ordinary
+one; be sure to read it in full, and don't assume that anything in it is
+the same as in the ordinary license.
+
+  The reason we have a separate public license for some libraries is that
+they blur the distinction we usually make between modifying or adding to a
+program and simply using it.  Linking a program with a library, without
+changing the library, is in some sense simply using the library, and is
+analogous to running a utility program or application program.  However, in
+a textual and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General Public License
+treats it as such.
+
+  Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote software
+sharing, because most developers did not use the libraries.  We
+concluded that weaker conditions might promote sharing better.
+
+  However, unrestricted linking of non-free programs would deprive the
+users of those programs of all benefit from the free status of the
+libraries themselves.  This Library General Public License is intended to
+permit developers of non-free programs to use free libraries, while
+preserving your freedom as a user of such programs to change the free
+libraries that are incorporated in them.  (We have not seen how to achieve
+this as regards changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.)  The hope is that this
+will lead to faster development of free libraries.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, while the latter only
+works together with the library.
+
+  Note that it is possible for a library to be covered by the ordinary
+General Public License rather than by this special one.
+
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Library
+General Public License (also called "this License").  Each licensee is
+addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also compile or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    c) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    d) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the source code distributed need not include anything that is normally
+distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Library General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+     Appendix: How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
diff --git a/glob/ChangeLog b/glob/ChangeLog
new file mode 100644
index 0000000..c543c85
--- /dev/null
+++ b/glob/ChangeLog
@@ -0,0 +1,191 @@
+2013-10-20  Paul Smith  <psmith@gnu.org>
+
+	* glob.c (glob): Cherry-pick a471e96a5352a5f0bde6d32dd36d33524811a2b1
+	from git://sourceware.org/git/glibc.git to fix SV 18123,
+	https://sourceware.org/bugzilla/show_bug.cgi?id=10278
+
+2008-09-28  Juan Manuel Guerrero  <juan.guerrero@gmx.de>
+
+	* glob.c (my_realloc) [__DJGPP__]: Don't define, and don't
+	redefine realloc to call it, since the DJGPP's realloc handles
+	NULL pointers correctly.
+
+2007-12-22  Juan Manuel Guerrero  <juan.guerrero@gmx.de>  (tiny change)
+
+	* glob.c [__GNU_LIBRARY__ && __DJGPP__]: Add a realloc
+	declaration that matches the one in the DJGPP libc.
+
+2006-02-24  Eli Zaretskii  <eliz@gnu.org>
+
+	* glob.c (my_malloc) [WINDOWS32]: Provide a full ISO C prototype,
+	to avoid compiler warnings.
+
+2005-06-25  Paul D. Smith  <psmith@gnu.org>
+
+	* fnmatch.h, glob.h [WINDOWS32]: Fix ifdefs in headers.
+	Fixes Savannah bug #13477.
+
+2005-03-11  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c (glob_in_dir): Change FNM_CASEFOLD to be enabled if
+	HAVE_CASE_INSENSITIVE_FS is defined.
+
+2003-01-30  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.h: Patch for FreeBSD by Mike Barcroft <mike@freebsd.org>
+	Reported by Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>.  On
+	FreeBSD, declare __size_t to simply size_t.
+
+2002-04-22  Paul D. Smith  <psmith@gnu.org>
+
+	* Makefile.am: Use automake 1.6.
+	Use new automake condition USE_LOCAL_GLOB to decide whether or not
+	to build the local GNU glob library or use the system one.
+
+1999-09-12  Paul D. Smith  <psmith@gnu.org>
+
+	* fnmatch.c: Last GLIBC version wouldn't compile outside of GLIBC
+	(undefined reference to internal_function).  Update to the latest
+	version
+
+1999-09-11  Paul Eggert  <eggert@twinsun.com>
+
+	* glob.h (glob): If #defining to glob64, do this before
+	declaring it, so that all declarations and uses match, and
+	do not declare glob64, to avoid a declaration clash.
+	(globfree): Likewise with globfree64.
+
+1999-09-08  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* glob.c (prefix_array) [__MSDOS__,WINDOWS32]: Keep the trailing
+	slash unless DIRNAME is just "x:/".
+
+1999-09-06  Paul D. Smith  <psmith@gnu.org>
+
+	* fnmatch.c: Update to latest version from GLIBC.
+
+1999-07-21  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, glob.h, fnmatch.c, fnmatch.h: Update to latest version
+	from GLIBC.
+
+	* fnmatch.c (internal_fnmatch): Use K&R definition syntax, not ANSI.
+	(__strchrnul): This won't exist outside GLIBC, so create one.
+
+	* glob.c: Move getlogin{,_r} prototypes below glob.h to get __P()
+	macro.
+
+1998-08-05  Paul D. Smith  <psmith@gnu.org>
+
+	* configure.in: Remove; configuration for glob is handled by the
+	make configure.in.
+
+1998-07-29  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, fnmatch.c: New versions from the GLIBC folks (Ulrich
+	Drepper).  Fixes a bug reported by Eli Zaretski.  Integrates
+	DOS/Windows32 support.
+
+1998-07-27  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
+
+	* glob.c (glob): Cast away const on assignment of pattern to dirname.
+	Cast the return type of __alloca() for traditional C compilers.
+
+1998-07-23  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, fnmatch.c: New versions of these files from the GLIBC
+	folks (Ulrich Drepper).  Had to re-integrate some DOS/Windows
+	code.
+
+1998-07-10  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c (glob_in_dir): If no meta chars exist in PATTERN and
+	GLOB_NOCHECK is present, don't look for the file--whether it's
+	found or not, we'll always return it, so why bother searching?
+
+	Also, if we are searching and there are no meta chars, don't
+	bother trying fnmatch() if the strcmp() fails.
+
+1998-05-30  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* glob.c (glob) [__MSDOS__, WINDOWS32]: Compute the directory and
+	filename parts of the pattern correctly when it includes a drive
+	spec.  Disallow wildcards in the drive spec.  Prevent recursion
+	when dirname is of the form "d:/" or "d:".
+	(prefix_array) [__MSDOS__, WINDOWS32]: Don't append a slash to
+	"d:/" and "d:".
+
+1998-05-13  Paul D. Smith  <psmith@gnu.org>
+
+	* SMakefile, Makefile.ami, glob.c, glob.h, fnmatch.c: Updated from
+	the latest glibc version.
+
+1998-04-17  Paul D. Smith  <psmith@gnu.org>
+
+	* configure.in: Create a config.h file instead of setting things
+	on the compile line.  This is because when build.sh runs it merely
+	passes -DHAVE_CONFIG_H to the glob files, just as it does to the
+	make files.
+	* config.h.in: Created by autoheader.
+
+Tue Aug 12 10:52:34 1997  Paul D. Smith  <psmith@baynetworks.com>
+
+	* configure.in: Require autoconf 2.12.
+
+	* glob: Updates from latest GNU libc glob code.
+
+	* glob.c,glob.h,fnmatch.h: Change all WIN32 references to WINDOWS32.
+
+	* glob.h: OSF4 defines macros in such a way that GLOB_ALTDIRFUNC
+	is not defined.  Added a test to the #if which defines it if
+	_GNU_SOURCE is defined; that's set by both glob.c and GNU make.
+
+	* glob.c: SunOS4 w/ cc needs #include <stdio.h>, since assert.h
+	requires stderr but doesn't include stdio.h :-/.
+	(next_brace_sub): De-protoize function definition.
+	(glob): Cast __alloca(); on SunOS4 it uses the default return type
+	of int.
+	(glob): Irix defines getlogin_r() to return a char*; move the
+	extern for that into the _LIBC area since it isn't used except in
+	LIBC anyway.  Likewise, move extern getlogin() into the "else".
+
+Sat Jul 20 21:55:31 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	Win32 hacks from <Rob_Tulloh@tivoli.com>.
+	* posix/glob.c [WIN32]: Don't include <pwd.h>; don't use d_ino;
+	use void * for my_realloc; include <malloc.h> for alloca.
+	(glob) [WIN32]: Use "c:/users/default" for ~ if no HOME variable.
+	* posix/fnmatch.h [WIN32]: Use prototypes even if [!__STDC__].
+	* posix/glob.h: Likewise.
+
+Fri Jul 19 16:56:41 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/glob.h [!_AMIGA && !VMS]: Check this instead of just [!_AMIGA]
+	for `struct stat;' forward decl.
+
+Sat Jun 22 10:44:09 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/glob.c: Include <alloca.h> only [HAVE_ALLOCA_H], not [sparc].
+
+Fri Jun 21 00:27:51 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/fnmatch.c (fnmatch): Fix \*[*?]+ case to increment name ptr
+	only for ?s, not for *s.  Fix from Chet Ramey.
+
+
+Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
+Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/glob/Makefile.am b/glob/Makefile.am
new file mode 100644
index 0000000..93fd60a
--- /dev/null
+++ b/glob/Makefile.am
@@ -0,0 +1,30 @@
+# -*-Makefile-*-, or close enough
+# Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AUTOMAKE_OPTIONS =	foreign
+
+# Only build the library when the system doesn't already have GNU glob.
+if USE_LOCAL_GLOB
+  noinst_LIBRARIES =	libglob.a
+endif
+
+libglob_a_SOURCES =	glob.c glob.h fnmatch.c fnmatch.h
+
+
+EXTRA_DIST =		COPYING.LIB Makefile.ami SCOPTIONS SMakefile \
+			configure.bat
diff --git a/glob/Makefile.ami b/glob/Makefile.ami
new file mode 100644
index 0000000..3fbf7e5
--- /dev/null
+++ b/glob/Makefile.ami
@@ -0,0 +1,67 @@
+# Makefile for standalone libglob.a (fnmatch, glob).             -*-Makefile-*-
+# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /glob/
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = /glob/
+
+CC = sc
+RM = delete
+CPPFLAGS =
+CFLAGS =
+
+# Information determined by configure.
+DEFS = Define HAVE_HEADER_STDC Define HAVE_UNISTD_H Define HAVE_STRING_H \
+	Define HAVE_DIRENT_H
+
+# How to invoke ar.
+AR = join
+ARFLAGS = as
+
+# How to invoke ranlib.
+RANLIB = ;
+
+.PHONY: all
+all: glob.lib
+
+glob.lib : glob.o fnmatch.o
+	$(AR) $(ARFLAGS) $@ glob.o fnmatch.o
+	$(RANLIB) $@
+
+# For some reason, Unix make wants the dependencies on the source files.
+# Otherwise it refuses to use an implicit rule!
+# And, get this: it doesn't work to use $(srcdir)foo.c!!
+glob.o: $(srcdir)glob.h $(srcdir)fnmatch.h glob.c
+fnmatch.o: $(srcdir)fnmatch.h fnmatch.c
+
+OUTPUT_OPTION =
+.c.o:
+	$(CC) IDir "" \
+	      $(DEFS) $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+.PHONY: clean realclean glob-clean glob-realclean distclean
+clean glob-clean:
+	-$(RM) glob.lib "#?.o" core
+distclean glob-realclean: clean
+	-$(RM) TAGS tags Makefile config.status config.h config.log
+realcean: distclean
+
+# For inside the C library.
+glob.tar glob.tar.Z:
+	$(MAKE) -C .. $@
diff --git a/glob/Makefile.in b/glob/Makefile.in
new file mode 100644
index 0000000..7a63861
--- /dev/null
+++ b/glob/Makefile.in
@@ -0,0 +1,589 @@
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = glob
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/config/depcomp COPYING.LIB ChangeLog
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libglob_a_AR = $(AR) $(ARFLAGS)
+libglob_a_LIBADD =
+am_libglob_a_OBJECTS = glob.$(OBJEXT) fnmatch.$(OBJEXT)
+libglob_a_OBJECTS = $(am_libglob_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libglob_a_SOURCES)
+DIST_SOURCES = $(libglob_a_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+
+# Only build the library when the system doesn't already have GNU glob.
+@USE_LOCAL_GLOB_TRUE@noinst_LIBRARIES = libglob.a
+libglob_a_SOURCES = glob.c glob.h fnmatch.c fnmatch.h
+EXTRA_DIST = COPYING.LIB Makefile.ami SCOPTIONS SMakefile \
+			configure.bat
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign glob/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign glob/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+libglob.a: $(libglob_a_OBJECTS) $(libglob_a_DEPENDENCIES) $(EXTRA_libglob_a_DEPENDENCIES) 
+	$(AM_V_at)-rm -f libglob.a
+	$(AM_V_AR)$(libglob_a_AR) libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
+	$(AM_V_at)$(RANLIB) libglob.a
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fnmatch.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/glob.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/glob/SCOPTIONS b/glob/SCOPTIONS
new file mode 100644
index 0000000..f89daae
--- /dev/null
+++ b/glob/SCOPTIONS
@@ -0,0 +1,13 @@
+ERRORREXX
+OPTIMIZE
+NOVERSION
+OPTIMIZERTIME
+OPTIMIZERALIAS
+DEFINE INCLUDEDIR="include:"
+DEFINE LIBDIR="lib:"
+DEFINE NO_ALLOCA
+DEFINE NO_FLOAT
+DEFINE NO_ARCHIVES
+IGNORE=161
+IGNORE=100
+STARTUP=cres
diff --git a/glob/SMakefile b/glob/SMakefile
new file mode 100644
index 0000000..0476a15
--- /dev/null
+++ b/glob/SMakefile
@@ -0,0 +1,67 @@
+# Makefile for standalone distribution of libglob.a (fnmatch, glob).
+# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /glob/
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = /glob/
+
+CC = sc
+CPPFLAGS =
+CFLAGS =
+MAKE = smake
+RM = delete
+
+# Information determined by configure.
+DEFS = Define HAVE_HEADER_STDC Define HAVE_UNISTD_H Define HAVE_STRING_H \
+	Define HAVE_DIRENT_H
+
+# How to invoke ar.
+AR = join
+ARFLAGS = as
+
+# How to invoke ranlib.
+RANLIB = ;
+
+.PHONY: all
+all: glob.lib
+
+glob.lib : glob.o fnmatch.o
+	$(AR) $(ARFLAGS) $@ glob.o fnmatch.o
+	$(RANLIB) $@
+
+# For some reason, Unix make wants the dependencies on the source files.
+# Otherwise it refuses to use an implicit rule!
+# And, get this: it doesn't work to use $(srcdir)foo.c!!
+glob.o: $(srcdir)glob.h $(srcdir)fnmatch.h glob.c
+fnmatch.o: $(srcdir)fnmatch.h fnmatch.c
+
+.c.o:
+	$(CC) IDir "" \
+	      $(DEFS) $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+.PHONY: clean realclean glob-clean glob-realclean distclean
+clean glob-clean:
+	-$(RM) -f glob.lib *.o core
+distclean glob-realclean: clean
+	-$(RM) -f TAGS tags Makefile config.status config.h config.log
+realcean: distclean
+
+# For inside the C library.
+glob.tar glob.tar.Z:
+	$(MAKE) -C .. $@
diff --git a/glob/configure.bat b/glob/configure.bat
new file mode 100644
index 0000000..672d733
--- /dev/null
+++ b/glob/configure.bat
@@ -0,0 +1,43 @@
+@echo off

+rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,

+rem 2004, 2005, 2006, 2007 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

+

+echo Configuring glob for DJGPP

+rem This batch file assumes a unix-type "sed" program

+

+echo # Makefile generated by "configure.bat"> Makefile

+

+if exist config.sed del config.sed

+

+echo "s/@srcdir@/./					">> config.sed

+echo "s/@CC@/gcc/					">> config.sed

+echo "s/@CFLAGS@/-O2 -g/				">> config.sed

+echo "s/@CPPFLAGS@/-DHAVE_CONFIG_H -I../		">> config.sed

+echo "s/@AR@/ar/					">> config.sed

+echo "s/@RANLIB@/ranlib/				">> config.sed

+echo "s/@LDFLAGS@//					">> config.sed

+echo "s/@DEFS@//					">> config.sed

+echo "s/@ALLOCA@//					">> config.sed

+echo "s/@LIBS@//					">> config.sed

+echo "s/@LIBOBJS@//					">> config.sed

+echo "s/^Makefile *:/_Makefile:/			">> config.sed

+echo "s/^config.h *:/_config.h:/			">> config.sed

+

+sed -e "s/^\"//" -e "s/\"$//" -e "s/[ 	]*$//" config.sed > config2.sed

+sed -f config2.sed Makefile.in >> Makefile

+del config.sed

+del config2.sed

diff --git a/glob/fnmatch.c b/glob/fnmatch.c
new file mode 100644
index 0000000..4da8c5f
--- /dev/null
+++ b/glob/fnmatch.c
@@ -0,0 +1,489 @@
+/* Copyright (C) 1991, 1992, 1993, 1996, 1997, 1998, 1999 Free Software
+Foundation, Inc.
+This file is part of the GNU C Library.
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public License as
+published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public License
+along with this library; see the file COPYING.LIB.  If not, write to the Free
+Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
+USA.  */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Enable GNU extensions in fnmatch.h.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#include <errno.h>
+#include <fnmatch.h>
+#include <ctype.h>
+
+#if HAVE_STRING_H || defined _LIBC
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+
+#if defined STDC_HEADERS || defined _LIBC
+# include <stdlib.h>
+#endif
+
+/* For platform which support the ISO C amendement 1 functionality we
+   support user defined character classes.  */
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+# include <wchar.h>
+# include <wctype.h>
+#endif
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#if defined _LIBC || !defined __GNU_LIBRARY__
+
+
+# if defined STDC_HEADERS || !defined isascii
+#  define ISASCII(c) 1
+# else
+#  define ISASCII(c) isascii(c)
+# endif
+
+# ifdef isblank
+#  define ISBLANK(c) (ISASCII (c) && isblank (c))
+# else
+#  define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+# endif
+# ifdef isgraph
+#  define ISGRAPH(c) (ISASCII (c) && isgraph (c))
+# else
+#  define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
+# endif
+
+# define ISPRINT(c) (ISASCII (c) && isprint (c))
+# define ISDIGIT(c) (ISASCII (c) && isdigit (c))
+# define ISALNUM(c) (ISASCII (c) && isalnum (c))
+# define ISALPHA(c) (ISASCII (c) && isalpha (c))
+# define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
+# define ISLOWER(c) (ISASCII (c) && islower (c))
+# define ISPUNCT(c) (ISASCII (c) && ispunct (c))
+# define ISSPACE(c) (ISASCII (c) && isspace (c))
+# define ISUPPER(c) (ISASCII (c) && isupper (c))
+# define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+
+# define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* The GNU C library provides support for user-defined character classes
+   and the functions from ISO C amendement 1.  */
+#  ifdef CHARCLASS_NAME_MAX
+#   define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
+#  else
+/* This shouldn't happen but some implementation might still have this
+   problem.  Use a reasonable default value.  */
+#   define CHAR_CLASS_MAX_LENGTH 256
+#  endif
+
+#  ifdef _LIBC
+#   define IS_CHAR_CLASS(string) __wctype (string)
+#  else
+#   define IS_CHAR_CLASS(string) wctype (string)
+#  endif
+# else
+#  define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
+
+#  define IS_CHAR_CLASS(string)						      \
+   (STREQ (string, "alpha") || STREQ (string, "upper")			      \
+    || STREQ (string, "lower") || STREQ (string, "digit")		      \
+    || STREQ (string, "alnum") || STREQ (string, "xdigit")		      \
+    || STREQ (string, "space") || STREQ (string, "print")		      \
+    || STREQ (string, "punct") || STREQ (string, "graph")		      \
+    || STREQ (string, "cntrl") || STREQ (string, "blank"))
+# endif
+
+/* Avoid depending on library functions or files
+   whose names are inconsistent.  */
+
+# if !defined _LIBC && !defined getenv
+extern char *getenv ();
+# endif
+
+# ifndef errno
+extern int errno;
+# endif
+
+/* This function doesn't exist on most systems.  */
+
+# if !defined HAVE___STRCHRNUL && !defined _LIBC
+static char *
+__strchrnul (s, c)
+     const char *s;
+     int c;
+{
+  char *result = strchr (s, c);
+  if (result == NULL)
+    result = strchr (s, '\0');
+  return result;
+}
+# endif
+
+# ifndef internal_function
+/* Inside GNU libc we mark some function in a special way.  In other
+   environments simply ignore the marking.  */
+#  define internal_function
+# endif
+
+/* Match STRING against the filename pattern PATTERN, returning zero if
+   it matches, nonzero if not.  */
+static int internal_fnmatch __P ((const char *pattern, const char *string,
+				  int no_leading_period, int flags))
+     internal_function;
+static int
+internal_function
+internal_fnmatch (pattern, string, no_leading_period, flags)
+     const char *pattern;
+     const char *string;
+     int no_leading_period;
+     int flags;
+{
+  register const char *p = pattern, *n = string;
+  register unsigned char c;
+
+/* Note that this evaluates C many times.  */
+# ifdef _LIBC
+#  define FOLD(c) ((flags & FNM_CASEFOLD) ? tolower (c) : (c))
+# else
+#  define FOLD(c) ((flags & FNM_CASEFOLD) && ISUPPER (c) ? tolower (c) : (c))
+# endif
+
+  while ((c = *p++) != '\0')
+    {
+      c = FOLD (c);
+
+      switch (c)
+	{
+	case '?':
+	  if (*n == '\0')
+	    return FNM_NOMATCH;
+	  else if (*n == '/' && (flags & FNM_FILE_NAME))
+	    return FNM_NOMATCH;
+	  else if (*n == '.' && no_leading_period
+		   && (n == string
+		       || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+	  break;
+
+	case '\\':
+	  if (!(flags & FNM_NOESCAPE))
+	    {
+	      c = *p++;
+	      if (c == '\0')
+		/* Trailing \ loses.  */
+		return FNM_NOMATCH;
+	      c = FOLD (c);
+	    }
+	  if (FOLD ((unsigned char) *n) != c)
+	    return FNM_NOMATCH;
+	  break;
+
+	case '*':
+	  if (*n == '.' && no_leading_period
+	      && (n == string
+		  || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+
+	  for (c = *p++; c == '?' || c == '*'; c = *p++)
+	    {
+	      if (*n == '/' && (flags & FNM_FILE_NAME))
+		/* A slash does not match a wildcard under FNM_FILE_NAME.  */
+		return FNM_NOMATCH;
+	      else if (c == '?')
+		{
+		  /* A ? needs to match one character.  */
+		  if (*n == '\0')
+		    /* There isn't another character; no match.  */
+		    return FNM_NOMATCH;
+		  else
+		    /* One character of the string is consumed in matching
+		       this ? wildcard, so *??? won't match if there are
+		       less than three characters.  */
+		    ++n;
+		}
+	    }
+
+	  if (c == '\0')
+	    /* The wildcard(s) is/are the last element of the pattern.
+	       If the name is a file name and contains another slash
+	       this does mean it cannot match.  */
+	    return ((flags & FNM_FILE_NAME) && strchr (n, '/') != NULL
+		    ? FNM_NOMATCH : 0);
+	  else
+	    {
+	      const char *endp;
+
+	      endp = __strchrnul (n, (flags & FNM_FILE_NAME) ? '/' : '\0');
+
+	      if (c == '[')
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  for (--p; n < endp; ++n)
+		    if (internal_fnmatch (p, n,
+					  (no_leading_period
+					   && (n == string
+					       || (n[-1] == '/'
+						   && (flags
+						       & FNM_FILE_NAME)))),
+					  flags2)
+			== 0)
+		      return 0;
+		}
+	      else if (c == '/' && (flags & FNM_FILE_NAME))
+		{
+		  while (*n != '\0' && *n != '/')
+		    ++n;
+		  if (*n == '/'
+		      && (internal_fnmatch (p, n + 1, flags & FNM_PERIOD,
+					    flags) == 0))
+		    return 0;
+		}
+	      else
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  if (c == '\\' && !(flags & FNM_NOESCAPE))
+		    c = *p;
+		  c = FOLD (c);
+		  for (--p; n < endp; ++n)
+		    if (FOLD ((unsigned char) *n) == c
+			&& (internal_fnmatch (p, n,
+					      (no_leading_period
+					       && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME)))),
+					      flags2) == 0))
+		      return 0;
+		}
+	    }
+
+	  /* If we come here no match is possible with the wildcard.  */
+	  return FNM_NOMATCH;
+
+	case '[':
+	  {
+	    /* Nonzero if the sense of the character class is inverted.  */
+	    static int posixly_correct;
+	    register int not;
+	    char cold;
+
+	    if (posixly_correct == 0)
+	      posixly_correct = getenv ("POSIXLY_CORRECT") != NULL ? 1 : -1;
+
+	    if (*n == '\0')
+	      return FNM_NOMATCH;
+
+	    if (*n == '.' && no_leading_period && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME))))
+	      return FNM_NOMATCH;
+
+	    if (*n == '/' && (flags & FNM_FILE_NAME))
+	      /* `/' cannot be matched.  */
+	      return FNM_NOMATCH;
+
+	    not = (*p == '!' || (posixly_correct < 0 && *p == '^'));
+	    if (not)
+	      ++p;
+
+	    c = *p++;
+	    for (;;)
+	      {
+		unsigned char fn = FOLD ((unsigned char) *n);
+
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    c = FOLD ((unsigned char) *p);
+		    ++p;
+
+		    if (c == fn)
+		      goto matched;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    /* Leave room for the null.  */
+		    char str[CHAR_CLASS_MAX_LENGTH + 1];
+		    size_t c1 = 0;
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wctype_t wt;
+# endif
+		    const char *startp = p;
+
+		    for (;;)
+		      {
+			if (c1 == CHAR_CLASS_MAX_LENGTH)
+			  /* The name is too long and therefore the pattern
+			     is ill-formed.  */
+			  return FNM_NOMATCH;
+
+			c = *++p;
+			if (c == ':' && p[1] == ']')
+			  {
+			    p += 2;
+			    break;
+			  }
+			if (c < 'a' || c >= 'z')
+			  {
+			    /* This cannot possibly be a character class name.
+			       Match it as a normal range.  */
+			    p = startp;
+			    c = '[';
+			    goto normal_bracket;
+			  }
+			str[c1++] = c;
+		      }
+		    str[c1] = '\0';
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wt = IS_CHAR_CLASS (str);
+		    if (wt == 0)
+		      /* Invalid character class name.  */
+		      return FNM_NOMATCH;
+
+		    if (__iswctype (__btowc ((unsigned char) *n), wt))
+		      goto matched;
+# else
+		    if ((STREQ (str, "alnum") && ISALNUM ((unsigned char) *n))
+			|| (STREQ (str, "alpha") && ISALPHA ((unsigned char) *n))
+			|| (STREQ (str, "blank") && ISBLANK ((unsigned char) *n))
+			|| (STREQ (str, "cntrl") && ISCNTRL ((unsigned char) *n))
+			|| (STREQ (str, "digit") && ISDIGIT ((unsigned char) *n))
+			|| (STREQ (str, "graph") && ISGRAPH ((unsigned char) *n))
+			|| (STREQ (str, "lower") && ISLOWER ((unsigned char) *n))
+			|| (STREQ (str, "print") && ISPRINT ((unsigned char) *n))
+			|| (STREQ (str, "punct") && ISPUNCT ((unsigned char) *n))
+			|| (STREQ (str, "space") && ISSPACE ((unsigned char) *n))
+			|| (STREQ (str, "upper") && ISUPPER ((unsigned char) *n))
+			|| (STREQ (str, "xdigit") && ISXDIGIT ((unsigned char) *n)))
+		      goto matched;
+# endif
+		  }
+		else if (c == '\0')
+		  /* [ (unterminated) loses.  */
+		  return FNM_NOMATCH;
+		else
+		  {
+		  normal_bracket:
+		    if (FOLD (c) == fn)
+		      goto matched;
+
+		    cold = c;
+		    c = *p++;
+
+		    if (c == '-' && *p != ']')
+		      {
+			/* It is a range.  */
+			unsigned char cend = *p++;
+			if (!(flags & FNM_NOESCAPE) && cend == '\\')
+			  cend = *p++;
+			if (cend == '\0')
+			  return FNM_NOMATCH;
+
+			if (cold <= fn && fn <= FOLD (cend))
+			  goto matched;
+
+			c = *p++;
+		      }
+		  }
+
+		if (c == ']')
+		  break;
+	      }
+
+	    if (!not)
+	      return FNM_NOMATCH;
+	    break;
+
+	  matched:
+	    /* Skip the rest of the [...] that already matched.  */
+	    while (c != ']')
+	      {
+		if (c == '\0')
+		  /* [... (unterminated) loses.  */
+		  return FNM_NOMATCH;
+
+		c = *p++;
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    /* XXX 1003.2d11 is unclear if this is right.  */
+		    ++p;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    do
+		      if (*++p == '\0')
+			return FNM_NOMATCH;
+		    while (*p != ':' || p[1] == ']');
+		    p += 2;
+		    c = *p;
+		  }
+	      }
+	    if (not)
+	      return FNM_NOMATCH;
+	  }
+	  break;
+
+	default:
+	  if (c != FOLD ((unsigned char) *n))
+	    return FNM_NOMATCH;
+	}
+
+      ++n;
+    }
+
+  if (*n == '\0')
+    return 0;
+
+  if ((flags & FNM_LEADING_DIR) && *n == '/')
+    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
+    return 0;
+
+  return FNM_NOMATCH;
+
+# undef FOLD
+}
+
+
+int
+fnmatch (pattern, string, flags)
+     const char *pattern;
+     const char *string;
+     int flags;
+{
+  return internal_fnmatch (pattern, string, flags & FNM_PERIOD, flags);
+}
+
+#endif	/* _LIBC or not __GNU_LIBRARY__.  */
diff --git a/glob/fnmatch.h b/glob/fnmatch.h
new file mode 100644
index 0000000..a788c8e
--- /dev/null
+++ b/glob/fnmatch.h
@@ -0,0 +1,85 @@
+/* Copyright (C) 1991, 1992, 1993, 1996, 1997, 1998, 1999 Free Software
+Foundation, Inc.
+This file is part of the GNU C Library.
+
+The GNU C Library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public License as
+published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version.
+
+The GNU C Library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public License
+along with this library; see the file COPYING.LIB.  If not, write to the Free
+Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
+USA.  */
+
+#ifndef	_FNMATCH_H
+#define	_FNMATCH_H	1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__
+#  undef	__P
+#  define __P(protos)	protos
+# endif
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# define __P(protos)	()
+/* We can get away without defining `const' here only because in this file
+   it is used only inside the prototype for `fnmatch', which is elided in
+   non-ANSI C where `const' is problematical.  */
+#endif /* C++ or ANSI C.  */
+
+#ifndef const
+# if (defined __STDC__ && __STDC__) || defined __cplusplus || defined WINDOWS32
+#  define __const	const
+# else
+#  define __const
+# endif
+#endif
+
+/* We #undef these before defining them because some losing systems
+   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
+#undef	FNM_PATHNAME
+#undef	FNM_NOESCAPE
+#undef	FNM_PERIOD
+
+/* Bits set in the FLAGS argument to `fnmatch'.  */
+#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
+#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
+#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
+
+#if !defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _GNU_SOURCE
+# define FNM_FILE_NAME	 FNM_PATHNAME	/* Preferred GNU name.  */
+# define FNM_LEADING_DIR (1 << 3)	/* Ignore `/...' after a match.  */
+# define FNM_CASEFOLD	 (1 << 4)	/* Compare without regard to case.  */
+#endif
+
+/* Value returned by `fnmatch' if STRING does not match PATTERN.  */
+#define	FNM_NOMATCH	1
+
+/* This value is returned if the implementation does not support
+   `fnmatch'.  Since this is not the case here it will never be
+   returned but the conformance test suites still require the symbol
+   to be defined.  */
+#ifdef _XOPEN_SOURCE
+# define FNM_NOSYS	(-1)
+#endif
+
+/* Match NAME against the filename pattern PATTERN,
+   returning zero if it matches, FNM_NOMATCH if not.  */
+extern int fnmatch __P ((__const char *__pattern, __const char *__name,
+			 int __flags));
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* fnmatch.h */
diff --git a/glob/glob.c b/glob/glob.c
new file mode 100644
index 0000000..f3911bc
--- /dev/null
+++ b/glob/glob.c
@@ -0,0 +1,1432 @@
+/* Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 Free
+Software Foundation, Inc.
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public License as
+published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public License
+along with this library; see the file COPYING.LIB.  If not, write to the Free
+Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
+USA.  */
+
+/* AIX requires this to be the first thing in the file.  */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef	HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Enable GNU extensions in glob.h.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+/* Outcomment the following line for production quality code.  */
+/* #define NDEBUG 1 */
+#include <assert.h>
+
+#include <stdio.h>		/* Needed on stupid SunOS for assert.  */
+
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GLOB_INTERFACE_VERSION 1
+#if !defined _LIBC && defined __GNU_LIBRARY__ && __GNU_LIBRARY__ > 1
+# include <gnu-versions.h>
+# if _GNU_GLOB_INTERFACE_VERSION == GLOB_INTERFACE_VERSION
+#  define ELIDE_CODE
+# endif
+#endif
+
+#ifndef ELIDE_CODE
+
+#if defined STDC_HEADERS || defined __GNU_LIBRARY__
+# include <stddef.h>
+#endif
+
+#if defined HAVE_UNISTD_H || defined _LIBC
+# include <unistd.h>
+# ifndef POSIX
+#  ifdef _POSIX_VERSION
+#   define POSIX
+#  endif
+# endif
+#endif
+
+#if !defined _AMIGA && !defined VMS && !defined WINDOWS32
+# include <pwd.h>
+#endif
+
+#if !defined __GNU_LIBRARY__ && !defined STDC_HEADERS
+extern int errno;
+#endif
+#ifndef __set_errno
+# define __set_errno(val) errno = (val)
+#endif
+
+#ifndef	NULL
+# define NULL	0
+#endif
+
+
+#if defined HAVE_DIRENT_H || defined __GNU_LIBRARY__
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+# ifdef HAVE_VMSDIR_H
+#  include "vmsdir.h"
+# endif /* HAVE_VMSDIR_H */
+#endif
+
+
+/* In GNU systems, <dirent.h> defines this macro for us.  */
+#ifdef _D_NAMLEN
+# undef NAMLEN
+# define NAMLEN(d) _D_NAMLEN(d)
+#endif
+
+/* When used in the GNU libc the symbol _DIRENT_HAVE_D_TYPE is available
+   if the `d_type' member for `struct dirent' is available.  */
+#ifdef _DIRENT_HAVE_D_TYPE
+# define HAVE_D_TYPE	1
+#endif
+
+
+#if (defined POSIX || defined WINDOWS32) && !defined __GNU_LIBRARY__
+/* Posix does not require that the d_ino field be present, and some
+   systems do not provide it. */
+# define REAL_DIR_ENTRY(dp) 1
+#else
+# define REAL_DIR_ENTRY(dp) (dp->d_ino != 0)
+#endif /* POSIX */
+
+#if defined STDC_HEADERS || defined __GNU_LIBRARY__
+# include <stdlib.h>
+# include <string.h>
+# define	ANSI_STRING
+#else	/* No standard headers.  */
+
+extern char *getenv ();
+
+# ifdef HAVE_STRING_H
+#  include <string.h>
+#  define ANSI_STRING
+# else
+#  include <strings.h>
+# endif
+# ifdef	HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+
+extern char *malloc (), *realloc ();
+extern void free ();
+
+extern void qsort ();
+extern void abort (), exit ();
+
+#endif	/* Standard headers.  */
+
+#ifndef	ANSI_STRING
+
+# ifndef bzero
+extern void bzero ();
+# endif
+# ifndef bcopy
+extern void bcopy ();
+# endif
+
+# define memcpy(d, s, n)	bcopy ((s), (d), (n))
+# define strrchr	rindex
+/* memset is only used for zero here, but let's be paranoid.  */
+# define memset(s, better_be_zero, n) \
+  ((void) ((better_be_zero) == 0 ? (bzero((s), (n)), 0) : (abort(), 0)))
+#endif	/* Not ANSI_STRING.  */
+
+#if !defined HAVE_STRCOLL && !defined _LIBC
+# define strcoll	strcmp
+#endif
+
+#if !defined HAVE_MEMPCPY && __GLIBC__ - 0 == 2 && __GLIBC_MINOR__ >= 1
+# define HAVE_MEMPCPY	1
+# undef  mempcpy
+# define mempcpy(Dest, Src, Len) __mempcpy (Dest, Src, Len)
+#endif
+
+#if !defined __GNU_LIBRARY__ && !defined __DJGPP__
+# ifdef	__GNUC__
+__inline
+# endif
+# ifndef __SASC
+#  ifdef WINDOWS32
+static void *
+my_realloc (void *p, unsigned int n)
+#  else
+static char *
+my_realloc (p, n)
+     char *p;
+     unsigned int n;
+#  endif
+{
+  /* These casts are the for sake of the broken Ultrix compiler,
+     which warns of illegal pointer combinations otherwise.  */
+  if (p == NULL)
+    return (char *) malloc (n);
+  return (char *) realloc (p, n);
+}
+# define	realloc	my_realloc
+# endif /* __SASC */
+#endif /* __GNU_LIBRARY__ || __DJGPP__ */
+
+
+#if !defined __alloca && !defined __GNU_LIBRARY__
+
+# ifdef	__GNUC__
+#  undef alloca
+#  define alloca(n)	__builtin_alloca (n)
+# else	/* Not GCC.  */
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else	/* Not HAVE_ALLOCA_H.  */
+#   ifndef _AIX
+#    ifdef WINDOWS32
+#     include <malloc.h>
+#    else
+extern char *alloca ();
+#    endif /* WINDOWS32 */
+#   endif /* Not _AIX.  */
+#  endif /* sparc or HAVE_ALLOCA_H.  */
+# endif	/* GCC.  */
+
+# define __alloca	alloca
+
+#endif
+
+#ifndef __GNU_LIBRARY__
+# define __stat stat
+# ifdef STAT_MACROS_BROKEN
+#  undef S_ISDIR
+# endif
+# ifndef S_ISDIR
+#  define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR)
+# endif
+#endif
+
+#ifdef _LIBC
+# undef strdup
+# define strdup(str) __strdup (str)
+# define sysconf(id) __sysconf (id)
+# define closedir(dir) __closedir (dir)
+# define opendir(name) __opendir (name)
+# define readdir(str) __readdir (str)
+# define getpwnam_r(name, bufp, buf, len, res) \
+   __getpwnam_r (name, bufp, buf, len, res)
+# ifndef __stat
+#  define __stat(fname, buf) __xstat (_STAT_VER, fname, buf)
+# endif
+#endif
+
+#if !(defined STDC_HEADERS || defined __GNU_LIBRARY__)
+# undef	size_t
+# define size_t	unsigned int
+#endif
+
+/* Some system header files erroneously define these.
+   We want our own definitions from <fnmatch.h> to take precedence.  */
+#ifndef __GNU_LIBRARY__
+# undef	FNM_PATHNAME
+# undef	FNM_NOESCAPE
+# undef	FNM_PERIOD
+#endif
+#include <fnmatch.h>
+
+/* Some system header files erroneously define these.
+   We want our own definitions from <glob.h> to take precedence.  */
+#ifndef __GNU_LIBRARY__
+# undef	GLOB_ERR
+# undef	GLOB_MARK
+# undef	GLOB_NOSORT
+# undef	GLOB_DOOFFS
+# undef	GLOB_NOCHECK
+# undef	GLOB_APPEND
+# undef	GLOB_NOESCAPE
+# undef	GLOB_PERIOD
+#endif
+#include <glob.h>
+
+#ifdef HAVE_GETLOGIN_R
+extern int getlogin_r __P ((char *, size_t));
+#else
+extern char *getlogin __P ((void));
+#endif
+
+static
+#if __GNUC__ - 0 >= 2
+inline
+#endif
+const char *next_brace_sub __P ((const char *begin));
+static int glob_in_dir __P ((const char *pattern, const char *directory,
+			     int flags,
+			     int (*errfunc) (const char *, int),
+			     glob_t *pglob));
+static int prefix_array __P ((const char *prefix, char **array, size_t n));
+static int collated_compare __P ((const __ptr_t, const __ptr_t));
+
+#if !defined _LIBC || !defined NO_GLOB_PATTERN_P
+int __glob_pattern_p __P ((const char *pattern, int quote));
+#endif
+
+/* Find the end of the sub-pattern in a brace expression.  We define
+   this as an inline function if the compiler permits.  */
+static
+#if __GNUC__ - 0 >= 2
+inline
+#endif
+const char *
+next_brace_sub (begin)
+     const char *begin;
+{
+  unsigned int depth = 0;
+  const char *cp = begin;
+
+  while (1)
+    {
+      if (depth == 0)
+	{
+	  if (*cp != ',' && *cp != '}' && *cp != '\0')
+	    {
+	      if (*cp == '{')
+		++depth;
+	      ++cp;
+	      continue;
+	    }
+	}
+      else
+	{
+	  while (*cp != '\0' && (*cp != '}' || depth > 0))
+	    {
+	      if (*cp == '}')
+		--depth;
+	      ++cp;
+	    }
+	  if (*cp == '\0')
+	    /* An incorrectly terminated brace expression.  */
+	    return NULL;
+
+	  continue;
+	}
+      break;
+    }
+
+  return cp;
+}
+
+/* Do glob searching for PATTERN, placing results in PGLOB.
+   The bits defined above may be set in FLAGS.
+   If a directory cannot be opened or read and ERRFUNC is not nil,
+   it is called with the pathname that caused the error, and the
+   `errno' value from the failing call; if it returns non-zero
+   `glob' returns GLOB_ABORTED; if it returns zero, the error is ignored.
+   If memory cannot be allocated for PGLOB, GLOB_NOSPACE is returned.
+   Otherwise, `glob' returns zero.  */
+int
+glob (pattern, flags, errfunc, pglob)
+     const char *pattern;
+     int flags;
+     int (*errfunc) __P ((const char *, int));
+     glob_t *pglob;
+{
+  const char *filename;
+  const char *dirname;
+  size_t dirlen;
+  int status;
+  int oldcount;
+
+  if (pattern == NULL || pglob == NULL || (flags & ~__GLOB_FLAGS) != 0)
+    {
+      __set_errno (EINVAL);
+      return -1;
+    }
+
+  /* POSIX requires all slashes to be matched.  This means that with
+     a trailing slash we must match only directories.  */
+  if (pattern[0] && pattern[strlen (pattern) - 1] == '/')
+    flags |= GLOB_ONLYDIR;
+
+  if (flags & GLOB_BRACE)
+    {
+      const char *begin = strchr (pattern, '{');
+      if (begin != NULL)
+	{
+	  /* Allocate working buffer large enough for our work.  Note that
+	    we have at least an opening and closing brace.  */
+	  int firstc;
+	  char *alt_start;
+	  const char *p;
+	  const char *next;
+	  const char *rest;
+	  size_t rest_len;
+#ifdef __GNUC__
+	  char onealt[strlen (pattern) - 1];
+#else
+	  char *onealt = (char *) malloc (strlen (pattern) - 1);
+	  if (onealt == NULL)
+	    {
+	      if (!(flags & GLOB_APPEND))
+		globfree (pglob);
+	      return GLOB_NOSPACE;
+	    }
+#endif
+
+	  /* We know the prefix for all sub-patterns.  */
+#ifdef HAVE_MEMPCPY
+	  alt_start = mempcpy (onealt, pattern, begin - pattern);
+#else
+	  memcpy (onealt, pattern, begin - pattern);
+	  alt_start = &onealt[begin - pattern];
+#endif
+
+	  /* Find the first sub-pattern and at the same time find the
+	     rest after the closing brace.  */
+	  next = next_brace_sub (begin + 1);
+	  if (next == NULL)
+	    {
+	      /* It is an illegal expression.  */
+#ifndef __GNUC__
+	      free (onealt);
+#endif
+	      return glob (pattern, flags & ~GLOB_BRACE, errfunc, pglob);
+	    }
+
+	  /* Now find the end of the whole brace expression.  */
+	  rest = next;
+	  while (*rest != '}')
+	    {
+	      rest = next_brace_sub (rest + 1);
+	      if (rest == NULL)
+		{
+		  /* It is an illegal expression.  */
+#ifndef __GNUC__
+		  free (onealt);
+#endif
+		  return glob (pattern, flags & ~GLOB_BRACE, errfunc, pglob);
+		}
+	    }
+	  /* Please note that we now can be sure the brace expression
+	     is well-formed.  */
+	  rest_len = strlen (++rest) + 1;
+
+	  /* We have a brace expression.  BEGIN points to the opening {,
+	     NEXT points past the terminator of the first element, and END
+	     points past the final }.  We will accumulate result names from
+	     recursive runs for each brace alternative in the buffer using
+	     GLOB_APPEND.  */
+
+	  if (!(flags & GLOB_APPEND))
+	    {
+	      /* This call is to set a new vector, so clear out the
+		 vector so we can append to it.  */
+	      pglob->gl_pathc = 0;
+	      pglob->gl_pathv = NULL;
+	    }
+	  firstc = pglob->gl_pathc;
+
+	  p = begin + 1;
+	  while (1)
+	    {
+	      int result;
+
+	      /* Construct the new glob expression.  */
+#ifdef HAVE_MEMPCPY
+	      mempcpy (mempcpy (alt_start, p, next - p), rest, rest_len);
+#else
+	      memcpy (alt_start, p, next - p);
+	      memcpy (&alt_start[next - p], rest, rest_len);
+#endif
+
+	      result = glob (onealt,
+			     ((flags & ~(GLOB_NOCHECK|GLOB_NOMAGIC))
+			      | GLOB_APPEND), errfunc, pglob);
+
+	      /* If we got an error, return it.  */
+	      if (result && result != GLOB_NOMATCH)
+		{
+#ifndef __GNUC__
+		  free (onealt);
+#endif
+		  if (!(flags & GLOB_APPEND))
+		    globfree (pglob);
+		  return result;
+		}
+
+	      if (*next == '}')
+		/* We saw the last entry.  */
+		break;
+
+	      p = next + 1;
+	      next = next_brace_sub (p);
+	      assert (next != NULL);
+	    }
+
+#ifndef __GNUC__
+	  free (onealt);
+#endif
+
+	  if (pglob->gl_pathc != firstc)
+	    /* We found some entries.  */
+	    return 0;
+	  else if (!(flags & (GLOB_NOCHECK|GLOB_NOMAGIC)))
+	    return GLOB_NOMATCH;
+	}
+    }
+
+  /* Find the filename.  */
+  filename = strrchr (pattern, '/');
+#if defined __MSDOS__ || defined WINDOWS32
+  /* The case of "d:pattern".  Since `:' is not allowed in
+     file names, we can safely assume that wherever it
+     happens in pattern, it signals the filename part.  This
+     is so we could some day support patterns like "[a-z]:foo".  */
+  if (filename == NULL)
+    filename = strchr (pattern, ':');
+#endif /* __MSDOS__ || WINDOWS32 */
+  if (filename == NULL)
+    {
+      /* This can mean two things: a simple name or "~name".  The later
+	 case is nothing but a notation for a directory.  */
+      if ((flags & (GLOB_TILDE|GLOB_TILDE_CHECK)) && pattern[0] == '~')
+	{
+	  dirname = pattern;
+	  dirlen = strlen (pattern);
+
+	  /* Set FILENAME to NULL as a special flag.  This is ugly but
+	     other solutions would require much more code.  We test for
+	     this special case below.  */
+	  filename = NULL;
+	}
+      else
+	{
+	  filename = pattern;
+#ifdef _AMIGA
+	  dirname = "";
+#else
+	  dirname = ".";
+#endif
+	  dirlen = 0;
+	}
+    }
+  else if (filename == pattern)
+    {
+      /* "/pattern".  */
+      dirname = "/";
+      dirlen = 1;
+      ++filename;
+    }
+  else
+    {
+      char *newp;
+      dirlen = filename - pattern;
+#if defined __MSDOS__ || defined WINDOWS32
+      if (*filename == ':'
+	  || (filename > pattern + 1 && filename[-1] == ':'))
+	{
+	  char *drive_spec;
+
+	  ++dirlen;
+	  drive_spec = (char *) __alloca (dirlen + 1);
+#ifdef HAVE_MEMPCPY
+	  *((char *) mempcpy (drive_spec, pattern, dirlen)) = '\0';
+#else
+	  memcpy (drive_spec, pattern, dirlen);
+	  drive_spec[dirlen] = '\0';
+#endif
+	  /* For now, disallow wildcards in the drive spec, to
+	     prevent infinite recursion in glob.  */
+	  if (__glob_pattern_p (drive_spec, !(flags & GLOB_NOESCAPE)))
+	    return GLOB_NOMATCH;
+	  /* If this is "d:pattern", we need to copy `:' to DIRNAME
+	     as well.  If it's "d:/pattern", don't remove the slash
+	     from "d:/", since "d:" and "d:/" are not the same.*/
+	}
+#endif
+      newp = (char *) __alloca (dirlen + 1);
+#ifdef HAVE_MEMPCPY
+      *((char *) mempcpy (newp, pattern, dirlen)) = '\0';
+#else
+      memcpy (newp, pattern, dirlen);
+      newp[dirlen] = '\0';
+#endif
+      dirname = newp;
+      ++filename;
+
+      if (filename[0] == '\0'
+#if defined __MSDOS__ || defined WINDOWS32
+          && dirname[dirlen - 1] != ':'
+	  && (dirlen < 3 || dirname[dirlen - 2] != ':'
+	      || dirname[dirlen - 1] != '/')
+#endif
+	  && dirlen > 1)
+	/* "pattern/".  Expand "pattern", appending slashes.  */
+	{
+	  int val = glob (dirname, flags | GLOB_MARK, errfunc, pglob);
+	  if (val == 0)
+	    pglob->gl_flags = ((pglob->gl_flags & ~GLOB_MARK)
+			       | (flags & GLOB_MARK));
+	  return val;
+	}
+    }
+
+  if (!(flags & GLOB_APPEND))
+    {
+      pglob->gl_pathc = 0;
+      pglob->gl_pathv = NULL;
+    }
+
+  oldcount = pglob->gl_pathc;
+
+#ifndef VMS
+  if ((flags & (GLOB_TILDE|GLOB_TILDE_CHECK)) && dirname[0] == '~')
+    {
+      if (dirname[1] == '\0' || dirname[1] == '/')
+	{
+	  /* Look up home directory.  */
+#ifdef VMS
+/* This isn't obvious, RTLs of DECC and VAXC know about "HOME" */
+          const char *home_dir = getenv ("SYS$LOGIN");
+#else
+          const char *home_dir = getenv ("HOME");
+#endif
+# ifdef _AMIGA
+	  if (home_dir == NULL || home_dir[0] == '\0')
+	    home_dir = "SYS:";
+# else
+#  ifdef WINDOWS32
+	  if (home_dir == NULL || home_dir[0] == '\0')
+            home_dir = "c:/users/default"; /* poor default */
+#  else
+#   ifdef VMS
+/* Again, this isn't obvious, if "HOME" isn't known "SYS$LOGIN" should be set */
+	  if (home_dir == NULL || home_dir[0] == '\0')
+	    home_dir = "SYS$DISK:[]";
+#   else
+	  if (home_dir == NULL || home_dir[0] == '\0')
+	    {
+	      int success;
+	      char *name;
+#   if defined HAVE_GETLOGIN_R || defined _LIBC
+	      size_t buflen = sysconf (_SC_LOGIN_NAME_MAX) + 1;
+
+	      if (buflen == 0)
+		/* `sysconf' does not support _SC_LOGIN_NAME_MAX.  Try
+		   a moderate value.  */
+		buflen = 20;
+	      name = (char *) __alloca (buflen);
+
+	      success = getlogin_r (name, buflen) >= 0;
+#   else
+	      success = (name = getlogin ()) != NULL;
+#   endif
+	      if (success)
+		{
+		  struct passwd *p;
+#   if defined HAVE_GETPWNAM_R || defined _LIBC
+		  size_t pwbuflen = sysconf (_SC_GETPW_R_SIZE_MAX);
+		  char *pwtmpbuf;
+		  struct passwd pwbuf;
+		  int save = errno;
+
+		  if (pwbuflen == -1)
+		    /* `sysconf' does not support _SC_GETPW_R_SIZE_MAX.
+		       Try a moderate value.  */
+		    pwbuflen = 1024;
+		  pwtmpbuf = (char *) __alloca (pwbuflen);
+
+		  while (getpwnam_r (name, &pwbuf, pwtmpbuf, pwbuflen, &p)
+			 != 0)
+		    {
+		      if (errno != ERANGE)
+			{
+			  p = NULL;
+			  break;
+			}
+		      pwbuflen *= 2;
+		      pwtmpbuf = (char *) __alloca (pwbuflen);
+		      __set_errno (save);
+		    }
+#   else
+		  p = getpwnam (name);
+#   endif
+		  if (p != NULL)
+		    home_dir = p->pw_dir;
+		}
+	    }
+	  if (home_dir == NULL || home_dir[0] == '\0')
+	    {
+	      if (flags & GLOB_TILDE_CHECK)
+		return GLOB_NOMATCH;
+	      else
+		home_dir = "~"; /* No luck.  */
+	    }
+#   endif /* VMS */
+#  endif /* WINDOWS32 */
+# endif
+	  /* Now construct the full directory.  */
+	  if (dirname[1] == '\0')
+	    dirname = home_dir;
+	  else
+	    {
+	      char *newp;
+	      size_t home_len = strlen (home_dir);
+	      newp = (char *) __alloca (home_len + dirlen);
+# ifdef HAVE_MEMPCPY
+	      mempcpy (mempcpy (newp, home_dir, home_len),
+		       &dirname[1], dirlen);
+# else
+	      memcpy (newp, home_dir, home_len);
+	      memcpy (&newp[home_len], &dirname[1], dirlen);
+# endif
+	      dirname = newp;
+	    }
+	}
+# if !defined _AMIGA && !defined WINDOWS32 && !defined VMS
+      else
+	{
+	  char *end_name = strchr (dirname, '/');
+	  const char *user_name;
+	  const char *home_dir;
+
+	  if (end_name == NULL)
+	    user_name = dirname + 1;
+	  else
+	    {
+	      char *newp;
+	      newp = (char *) __alloca (end_name - dirname);
+# ifdef HAVE_MEMPCPY
+	      *((char *) mempcpy (newp, dirname + 1, end_name - dirname))
+		= '\0';
+# else
+	      memcpy (newp, dirname + 1, end_name - dirname);
+	      newp[end_name - dirname - 1] = '\0';
+# endif
+	      user_name = newp;
+	    }
+
+	  /* Look up specific user's home directory.  */
+	  {
+	    struct passwd *p;
+#  if defined HAVE_GETPWNAM_R || defined _LIBC
+	    size_t buflen = sysconf (_SC_GETPW_R_SIZE_MAX);
+	    char *pwtmpbuf;
+	    struct passwd pwbuf;
+	    int save = errno;
+
+	    if (buflen == -1)
+	      /* `sysconf' does not support _SC_GETPW_R_SIZE_MAX.  Try a
+		 moderate value.  */
+	      buflen = 1024;
+	    pwtmpbuf = (char *) __alloca (buflen);
+
+	    while (getpwnam_r (user_name, &pwbuf, pwtmpbuf, buflen, &p) != 0)
+	      {
+		if (errno != ERANGE)
+		  {
+		    p = NULL;
+		    break;
+		  }
+		buflen *= 2;
+		pwtmpbuf = __alloca (buflen);
+		__set_errno (save);
+	      }
+#  else
+	    p = getpwnam (user_name);
+#  endif
+	    if (p != NULL)
+	      home_dir = p->pw_dir;
+	    else
+	      home_dir = NULL;
+	  }
+	  /* If we found a home directory use this.  */
+	  if (home_dir != NULL)
+	    {
+	      char *newp;
+	      size_t home_len = strlen (home_dir);
+	      size_t rest_len = end_name == NULL ? 0 : strlen (end_name);
+	      newp = (char *) __alloca (home_len + rest_len + 1);
+#  ifdef HAVE_MEMPCPY
+	      *((char *) mempcpy (mempcpy (newp, home_dir, home_len),
+				  end_name, rest_len)) = '\0';
+#  else
+	      memcpy (newp, home_dir, home_len);
+	      memcpy (&newp[home_len], end_name, rest_len);
+	      newp[home_len + rest_len] = '\0';
+#  endif
+	      dirname = newp;
+	    }
+	  else
+	    if (flags & GLOB_TILDE_CHECK)
+	      /* We have to regard it as an error if we cannot find the
+		 home directory.  */
+	      return GLOB_NOMATCH;
+	}
+# endif	/* Not Amiga && not WINDOWS32 && not VMS.  */
+    }
+#endif	/* Not VMS.  */
+
+  /* Now test whether we looked for "~" or "~NAME".  In this case we
+     can give the answer now.  */
+  if (filename == NULL)
+    {
+      struct stat st;
+
+      /* Return the directory if we don't check for error or if it exists.  */
+      if ((flags & GLOB_NOCHECK)
+	  || (((flags & GLOB_ALTDIRFUNC)
+	       ? (*pglob->gl_stat) (dirname, &st)
+	       : __stat (dirname, &st)) == 0
+	      && S_ISDIR (st.st_mode)))
+	{
+	  pglob->gl_pathv
+	    = (char **) realloc (pglob->gl_pathv,
+				 (pglob->gl_pathc +
+				  ((flags & GLOB_DOOFFS) ?
+				   pglob->gl_offs : 0) +
+				  1 + 1) *
+				 sizeof (char *));
+	  if (pglob->gl_pathv == NULL)
+	    return GLOB_NOSPACE;
+
+	  if (flags & GLOB_DOOFFS)
+	    while (pglob->gl_pathc < pglob->gl_offs)
+	      pglob->gl_pathv[pglob->gl_pathc++] = NULL;
+
+#if defined HAVE_STRDUP || defined _LIBC
+	  pglob->gl_pathv[pglob->gl_pathc] = strdup (dirname);
+#else
+	  {
+	    size_t len = strlen (dirname) + 1;
+	    char *dircopy = malloc (len);
+	    if (dircopy != NULL)
+	      pglob->gl_pathv[pglob->gl_pathc] = memcpy (dircopy, dirname,
+							 len);
+	  }
+#endif
+	  if (pglob->gl_pathv[pglob->gl_pathc] == NULL)
+	    {
+	      free (pglob->gl_pathv);
+	      return GLOB_NOSPACE;
+	    }
+	  pglob->gl_pathv[++pglob->gl_pathc] = NULL;
+	  pglob->gl_flags = flags;
+
+	  return 0;
+	}
+
+      /* Not found.  */
+      return GLOB_NOMATCH;
+    }
+
+  if (__glob_pattern_p (dirname, !(flags & GLOB_NOESCAPE)))
+    {
+      /* The directory name contains metacharacters, so we
+	 have to glob for the directory, and then glob for
+	 the pattern in each directory found.  */
+      glob_t dirs;
+      register int i;
+
+      status = glob (dirname,
+		     ((flags & (GLOB_ERR | GLOB_NOCHECK | GLOB_NOESCAPE))
+		      | GLOB_NOSORT | GLOB_ONLYDIR),
+		     errfunc, &dirs);
+      if (status != 0)
+	return status;
+
+      /* We have successfully globbed the preceding directory name.
+	 For each name we found, call glob_in_dir on it and FILENAME,
+	 appending the results to PGLOB.  */
+      for (i = 0; i < dirs.gl_pathc; ++i)
+	{
+	  int old_pathc;
+
+#ifdef	SHELL
+	  {
+	    /* Make globbing interruptible in the bash shell. */
+	    extern int interrupt_state;
+
+	    if (interrupt_state)
+	      {
+		globfree (&dirs);
+		globfree (&files);
+		return GLOB_ABORTED;
+	      }
+	  }
+#endif /* SHELL.  */
+
+	  old_pathc = pglob->gl_pathc;
+	  status = glob_in_dir (filename, dirs.gl_pathv[i],
+				((flags | GLOB_APPEND)
+				 & ~(GLOB_NOCHECK | GLOB_ERR)),
+				errfunc, pglob);
+	  if (status == GLOB_NOMATCH)
+	    /* No matches in this directory.  Try the next.  */
+	    continue;
+
+	  if (status != 0)
+	    {
+	      globfree (&dirs);
+	      globfree (pglob);
+	      return status;
+	    }
+
+	  /* Stick the directory on the front of each name.  */
+	  if (prefix_array (dirs.gl_pathv[i],
+			    &pglob->gl_pathv[old_pathc],
+			    pglob->gl_pathc - old_pathc))
+	    {
+	      globfree (&dirs);
+	      globfree (pglob);
+	      return GLOB_NOSPACE;
+	    }
+	}
+
+      flags |= GLOB_MAGCHAR;
+
+      /* We have ignored the GLOB_NOCHECK flag in the `glob_in_dir' calls.
+	 But if we have not found any matching entry and thie GLOB_NOCHECK
+	 flag was set we must return the list consisting of the disrectory
+	 names followed by the filename.  */
+      if (pglob->gl_pathc == oldcount)
+	{
+	  /* No matches.  */
+	  if (flags & GLOB_NOCHECK)
+	    {
+	      size_t filename_len = strlen (filename) + 1;
+	      char **new_pathv;
+	      struct stat st;
+
+	      /* This is an pessimistic guess about the size.  */
+	      pglob->gl_pathv
+		= (char **) realloc (pglob->gl_pathv,
+				     (pglob->gl_pathc +
+				      ((flags & GLOB_DOOFFS) ?
+				       pglob->gl_offs : 0) +
+				      dirs.gl_pathc + 1) *
+				     sizeof (char *));
+	      if (pglob->gl_pathv == NULL)
+		{
+		  globfree (&dirs);
+		  return GLOB_NOSPACE;
+		}
+
+	      if (flags & GLOB_DOOFFS)
+		while (pglob->gl_pathc < pglob->gl_offs)
+		  pglob->gl_pathv[pglob->gl_pathc++] = NULL;
+
+	      for (i = 0; i < dirs.gl_pathc; ++i)
+		{
+		  const char *dir = dirs.gl_pathv[i];
+		  size_t dir_len = strlen (dir);
+
+		  /* First check whether this really is a directory.  */
+		  if (((flags & GLOB_ALTDIRFUNC)
+		       ? (*pglob->gl_stat) (dir, &st) : __stat (dir, &st)) != 0
+		      || !S_ISDIR (st.st_mode))
+		    /* No directory, ignore this entry.  */
+		    continue;
+
+		  pglob->gl_pathv[pglob->gl_pathc] = malloc (dir_len + 1
+							     + filename_len);
+		  if (pglob->gl_pathv[pglob->gl_pathc] == NULL)
+		    {
+		      globfree (&dirs);
+		      globfree (pglob);
+		      return GLOB_NOSPACE;
+		    }
+
+#ifdef HAVE_MEMPCPY
+		  mempcpy (mempcpy (mempcpy (pglob->gl_pathv[pglob->gl_pathc],
+					     dir, dir_len),
+				    "/", 1),
+			   filename, filename_len);
+#else
+		  memcpy (pglob->gl_pathv[pglob->gl_pathc], dir, dir_len);
+		  pglob->gl_pathv[pglob->gl_pathc][dir_len] = '/';
+		  memcpy (&pglob->gl_pathv[pglob->gl_pathc][dir_len + 1],
+			  filename, filename_len);
+#endif
+		  ++pglob->gl_pathc;
+		}
+
+	      pglob->gl_pathv[pglob->gl_pathc] = NULL;
+	      pglob->gl_flags = flags;
+
+	      /* Now we know how large the gl_pathv vector must be.  */
+	      new_pathv = (char **) realloc (pglob->gl_pathv,
+					     ((pglob->gl_pathc + 1)
+					      * sizeof (char *)));
+	      if (new_pathv != NULL)
+		pglob->gl_pathv = new_pathv;
+	    }
+	  else
+	    return GLOB_NOMATCH;
+	}
+
+      globfree (&dirs);
+    }
+  else
+    {
+      status = glob_in_dir (filename, dirname, flags, errfunc, pglob);
+      if (status != 0)
+	return status;
+
+      if (dirlen > 0)
+	{
+	  /* Stick the directory on the front of each name.  */
+	  int ignore = oldcount;
+
+	  if ((flags & GLOB_DOOFFS) && ignore < pglob->gl_offs)
+	    ignore = pglob->gl_offs;
+
+	  if (prefix_array (dirname,
+			    &pglob->gl_pathv[ignore],
+			    pglob->gl_pathc - ignore))
+	    {
+	      globfree (pglob);
+	      return GLOB_NOSPACE;
+	    }
+	}
+    }
+
+  if (flags & GLOB_MARK)
+    {
+      /* Append slashes to directory names.  */
+      int i;
+      struct stat st;
+      for (i = oldcount; i < pglob->gl_pathc; ++i)
+	if (((flags & GLOB_ALTDIRFUNC)
+	     ? (*pglob->gl_stat) (pglob->gl_pathv[i], &st)
+	     : __stat (pglob->gl_pathv[i], &st)) == 0
+	    && S_ISDIR (st.st_mode))
+	  {
+ 	    size_t len = strlen (pglob->gl_pathv[i]) + 2;
+	    char *new = realloc (pglob->gl_pathv[i], len);
+ 	    if (new == NULL)
+	      {
+		globfree (pglob);
+		return GLOB_NOSPACE;
+	      }
+	    strcpy (&new[len - 2], "/");
+	    pglob->gl_pathv[i] = new;
+	  }
+    }
+
+  if (!(flags & GLOB_NOSORT))
+    {
+      /* Sort the vector.  */
+      int non_sort = oldcount;
+
+      if ((flags & GLOB_DOOFFS) && pglob->gl_offs > oldcount)
+	non_sort = pglob->gl_offs;
+
+      qsort ((__ptr_t) &pglob->gl_pathv[non_sort],
+	     pglob->gl_pathc - non_sort,
+	     sizeof (char *), collated_compare);
+    }
+
+  return 0;
+}
+
+
+/* Free storage allocated in PGLOB by a previous `glob' call.  */
+void
+globfree (pglob)
+     register glob_t *pglob;
+{
+  if (pglob->gl_pathv != NULL)
+    {
+      register int i;
+      for (i = 0; i < pglob->gl_pathc; ++i)
+	if (pglob->gl_pathv[i] != NULL)
+	  free ((__ptr_t) pglob->gl_pathv[i]);
+      free ((__ptr_t) pglob->gl_pathv);
+    }
+}
+
+
+/* Do a collated comparison of A and B.  */
+static int
+collated_compare (a, b)
+     const __ptr_t a;
+     const __ptr_t b;
+{
+  const char *const s1 = *(const char *const * const) a;
+  const char *const s2 = *(const char *const * const) b;
+
+  if (s1 == s2)
+    return 0;
+  if (s1 == NULL)
+    return 1;
+  if (s2 == NULL)
+    return -1;
+  return strcoll (s1, s2);
+}
+
+
+/* Prepend DIRNAME to each of N members of ARRAY, replacing ARRAY's
+   elements in place.  Return nonzero if out of memory, zero if successful.
+   A slash is inserted between DIRNAME and each elt of ARRAY,
+   unless DIRNAME is just "/".  Each old element of ARRAY is freed.  */
+static int
+prefix_array (dirname, array, n)
+     const char *dirname;
+     char **array;
+     size_t n;
+{
+  register size_t i;
+  size_t dirlen = strlen (dirname);
+#if defined __MSDOS__ || defined WINDOWS32
+  int sep_char = '/';
+# define DIRSEP_CHAR sep_char
+#else
+# define DIRSEP_CHAR '/'
+#endif
+
+  if (dirlen == 1 && dirname[0] == '/')
+    /* DIRNAME is just "/", so normal prepending would get us "//foo".
+       We want "/foo" instead, so don't prepend any chars from DIRNAME.  */
+    dirlen = 0;
+#if defined __MSDOS__ || defined WINDOWS32
+  else if (dirlen > 1)
+    {
+      if (dirname[dirlen - 1] == '/' && dirname[dirlen - 2] == ':')
+	/* DIRNAME is "d:/".  Don't prepend the slash from DIRNAME.  */
+	--dirlen;
+      else if (dirname[dirlen - 1] == ':')
+	{
+	  /* DIRNAME is "d:".  Use `:' instead of `/'.  */
+	  --dirlen;
+	  sep_char = ':';
+	}
+    }
+#endif
+
+  for (i = 0; i < n; ++i)
+    {
+      size_t eltlen = strlen (array[i]) + 1;
+      char *new = (char *) malloc (dirlen + 1 + eltlen);
+      if (new == NULL)
+	{
+	  while (i > 0)
+	    free ((__ptr_t) array[--i]);
+	  return 1;
+	}
+
+#ifdef HAVE_MEMPCPY
+      {
+	char *endp = (char *) mempcpy (new, dirname, dirlen);
+	*endp++ = DIRSEP_CHAR;
+	mempcpy (endp, array[i], eltlen);
+      }
+#else
+      memcpy (new, dirname, dirlen);
+      new[dirlen] = DIRSEP_CHAR;
+      memcpy (&new[dirlen + 1], array[i], eltlen);
+#endif
+      free ((__ptr_t) array[i]);
+      array[i] = new;
+    }
+
+  return 0;
+}
+
+
+/* We must not compile this function twice.  */
+#if !defined _LIBC || !defined NO_GLOB_PATTERN_P
+/* Return nonzero if PATTERN contains any metacharacters.
+   Metacharacters can be quoted with backslashes if QUOTE is nonzero.  */
+int
+__glob_pattern_p (pattern, quote)
+     const char *pattern;
+     int quote;
+{
+  register const char *p;
+  int open = 0;
+
+  for (p = pattern; *p != '\0'; ++p)
+    switch (*p)
+      {
+      case '?':
+      case '*':
+	return 1;
+
+      case '\\':
+	if (quote && p[1] != '\0')
+	  ++p;
+	break;
+
+      case '[':
+	open = 1;
+	break;
+
+      case ']':
+	if (open)
+	  return 1;
+	break;
+      }
+
+  return 0;
+}
+# ifdef _LIBC
+weak_alias (__glob_pattern_p, glob_pattern_p)
+# endif
+#endif
+
+
+/* Like `glob', but PATTERN is a final pathname component,
+   and matches are searched for in DIRECTORY.
+   The GLOB_NOSORT bit in FLAGS is ignored.  No sorting is ever done.
+   The GLOB_APPEND flag is assumed to be set (always appends).  */
+static int
+glob_in_dir (pattern, directory, flags, errfunc, pglob)
+     const char *pattern;
+     const char *directory;
+     int flags;
+     int (*errfunc) __P ((const char *, int));
+     glob_t *pglob;
+{
+  __ptr_t stream = NULL;
+
+  struct globlink
+    {
+      struct globlink *next;
+      char *name;
+    };
+  struct globlink *names = NULL;
+  size_t nfound;
+  int meta;
+  int save;
+
+#ifdef VMS
+  if (*directory == 0)
+    directory = "[]";
+#endif
+  meta = __glob_pattern_p (pattern, !(flags & GLOB_NOESCAPE));
+  if (meta == 0)
+    {
+      if (flags & (GLOB_NOCHECK|GLOB_NOMAGIC))
+	/* We need not do any tests.  The PATTERN contains no meta
+	   characters and we must not return an error therefore the
+	   result will always contain exactly one name.  */
+	flags |= GLOB_NOCHECK;
+      else
+	{
+	  /* Since we use the normal file functions we can also use stat()
+	     to verify the file is there.  */
+	  struct stat st;
+	  size_t patlen = strlen (pattern);
+	  size_t dirlen = strlen (directory);
+	  char *fullname = (char *) __alloca (dirlen + 1 + patlen + 1);
+
+# ifdef HAVE_MEMPCPY
+	  mempcpy (mempcpy (mempcpy (fullname, directory, dirlen),
+			    "/", 1),
+		   pattern, patlen + 1);
+# else
+	  memcpy (fullname, directory, dirlen);
+	  fullname[dirlen] = '/';
+	  memcpy (&fullname[dirlen + 1], pattern, patlen + 1);
+# endif
+	  if (((flags & GLOB_ALTDIRFUNC)
+	       ? (*pglob->gl_stat) (fullname, &st)
+	       : __stat (fullname, &st)) == 0)
+	    /* We found this file to be existing.  Now tell the rest
+	       of the function to copy this name into the result.  */
+	    flags |= GLOB_NOCHECK;
+	}
+
+      nfound = 0;
+    }
+  else
+    {
+      if (pattern[0] == '\0')
+	{
+	  /* This is a special case for matching directories like in
+	     "*a/".  */
+	  names = (struct globlink *) __alloca (sizeof (struct globlink));
+	  names->name = (char *) malloc (1);
+	  if (names->name == NULL)
+	    goto memory_error;
+	  names->name[0] = '\0';
+	  names->next = NULL;
+	  nfound = 1;
+	  meta = 0;
+	}
+      else
+	{
+	  stream = ((flags & GLOB_ALTDIRFUNC)
+		    ? (*pglob->gl_opendir) (directory)
+		    : (__ptr_t) opendir (directory));
+	  if (stream == NULL)
+	    {
+	      if (errno != ENOTDIR
+		  && ((errfunc != NULL && (*errfunc) (directory, errno))
+		      || (flags & GLOB_ERR)))
+		return GLOB_ABORTED;
+	      nfound = 0;
+	      meta = 0;
+	    }
+	  else
+	    {
+	      int fnm_flags = ((!(flags & GLOB_PERIOD) ? FNM_PERIOD : 0)
+			       | ((flags & GLOB_NOESCAPE) ? FNM_NOESCAPE : 0)
+#if defined HAVE_CASE_INSENSITIVE_FS
+				   | FNM_CASEFOLD
+#endif
+				   );
+	      nfound = 0;
+	      flags |= GLOB_MAGCHAR;
+
+	      while (1)
+		{
+		  const char *name;
+		  size_t len;
+		  struct dirent *d = ((flags & GLOB_ALTDIRFUNC)
+				      ? (*pglob->gl_readdir) (stream)
+				      : readdir ((DIR *) stream));
+		  if (d == NULL)
+		    break;
+		  if (! REAL_DIR_ENTRY (d))
+		    continue;
+
+#ifdef HAVE_D_TYPE
+		  /* If we shall match only directories use the information
+		     provided by the dirent call if possible.  */
+		  if ((flags & GLOB_ONLYDIR)
+		      && d->d_type != DT_UNKNOWN && d->d_type != DT_DIR)
+		    continue;
+#endif
+
+		  name = d->d_name;
+
+		  if (fnmatch (pattern, name, fnm_flags) == 0)
+		    {
+		      struct globlink *new = (struct globlink *)
+			__alloca (sizeof (struct globlink));
+		      len = NAMLEN (d);
+		      new->name = (char *) malloc (len + 1);
+		      if (new->name == NULL)
+			goto memory_error;
+#ifdef HAVE_MEMPCPY
+		      *((char *) mempcpy ((__ptr_t) new->name, name, len))
+			= '\0';
+#else
+		      memcpy ((__ptr_t) new->name, name, len);
+		      new->name[len] = '\0';
+#endif
+		      new->next = names;
+		      names = new;
+		      ++nfound;
+		    }
+		}
+	    }
+	}
+    }
+
+  if (nfound == 0 && (flags & GLOB_NOCHECK))
+    {
+      size_t len = strlen (pattern);
+      nfound = 1;
+      names = (struct globlink *) __alloca (sizeof (struct globlink));
+      names->next = NULL;
+      names->name = (char *) malloc (len + 1);
+      if (names->name == NULL)
+	goto memory_error;
+#ifdef HAVE_MEMPCPY
+      *((char *) mempcpy (names->name, pattern, len)) = '\0';
+#else
+      memcpy (names->name, pattern, len);
+      names->name[len] = '\0';
+#endif
+    }
+
+  if (nfound != 0)
+    {
+      pglob->gl_pathv
+	= (char **) realloc (pglob->gl_pathv,
+			     (pglob->gl_pathc +
+			      ((flags & GLOB_DOOFFS) ? pglob->gl_offs : 0) +
+			      nfound + 1) *
+			     sizeof (char *));
+      if (pglob->gl_pathv == NULL)
+	goto memory_error;
+
+      if (flags & GLOB_DOOFFS)
+	while (pglob->gl_pathc < pglob->gl_offs)
+	  pglob->gl_pathv[pglob->gl_pathc++] = NULL;
+
+      for (; names != NULL; names = names->next)
+	pglob->gl_pathv[pglob->gl_pathc++] = names->name;
+      pglob->gl_pathv[pglob->gl_pathc] = NULL;
+
+      pglob->gl_flags = flags;
+    }
+
+  save = errno;
+  if (stream != NULL)
+    {
+      if (flags & GLOB_ALTDIRFUNC)
+	(*pglob->gl_closedir) (stream);
+      else
+	closedir ((DIR *) stream);
+    }
+  __set_errno (save);
+
+  return nfound == 0 ? GLOB_NOMATCH : 0;
+
+ memory_error:
+  {
+    int save = errno;
+    if (flags & GLOB_ALTDIRFUNC)
+      (*pglob->gl_closedir) (stream);
+    else
+      closedir ((DIR *) stream);
+    __set_errno (save);
+  }
+  while (names != NULL)
+    {
+      if (names->name != NULL)
+	free ((__ptr_t) names->name);
+      names = names->next;
+    }
+  return GLOB_NOSPACE;
+}
+
+#endif	/* Not ELIDE_CODE.  */
diff --git a/glob/glob.h b/glob/glob.h
new file mode 100644
index 0000000..0992de3
--- /dev/null
+++ b/glob/glob.h
@@ -0,0 +1,210 @@
+/* Copyright (C) 1991, 1992, 1995, 1996, 1997, 1998 Free Software Foundation,
+Inc.
+
+The GNU C Library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public License as
+published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version.
+
+The GNU C Library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public License
+along with this library; see the file COPYING.LIB.  If not, write to the Free
+Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
+USA.  */
+
+#ifndef	_GLOB_H
+#define	_GLOB_H	1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#undef	__ptr_t
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__
+#  undef __P
+#  undef __PMT
+#  define __P(protos)	protos
+#  define __PMT(protos)	protos
+#  if !defined __GNUC__ || __GNUC__ < 2
+#   undef __const
+#   define __const const
+#  endif
+# endif
+# define __ptr_t	void *
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# undef __PMT
+# define __P(protos)	()
+# define __PMT(protos)	()
+# undef	__const
+# define __const
+# define __ptr_t	char *
+#endif /* C++ or ANSI C.  */
+
+/* We need `size_t' for the following definitions.  */
+#ifndef __size_t
+# if defined __FreeBSD__
+#  define __size_t size_t
+# else
+#  if defined __GNUC__ && __GNUC__ >= 2
+typedef __SIZE_TYPE__ __size_t;
+#  else
+/* This is a guess.  */
+/*hb
+ *	Conflicts with DECCs already defined type __size_t.
+ *	Defining an own type with a name beginning with '__' is no good.
+ *	Anyway if DECC is used and __SIZE_T is defined then __size_t is
+ *	already defined (and I hope it's exactly the one we need here).
+ */
+#   if !(defined __DECC && defined __SIZE_T)
+typedef unsigned long int __size_t;
+#   endif
+#  endif
+# endif
+#else
+/* The GNU CC stddef.h version defines __size_t as empty.  We need a real
+   definition.  */
+# undef __size_t
+# define __size_t size_t
+#endif
+
+/* Bits set in the FLAGS argument to `glob'.  */
+#define	GLOB_ERR	(1 << 0)/* Return on read errors.  */
+#define	GLOB_MARK	(1 << 1)/* Append a slash to each name.  */
+#define	GLOB_NOSORT	(1 << 2)/* Don't sort the names.  */
+#define	GLOB_DOOFFS	(1 << 3)/* Insert PGLOB->gl_offs NULLs.  */
+#define	GLOB_NOCHECK	(1 << 4)/* If nothing matches, return the pattern.  */
+#define	GLOB_APPEND	(1 << 5)/* Append to results of a previous call.  */
+#define	GLOB_NOESCAPE	(1 << 6)/* Backslashes don't quote metacharacters.  */
+#define	GLOB_PERIOD	(1 << 7)/* Leading `.' can be matched by metachars.  */
+
+#if (!defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _BSD_SOURCE \
+     || defined _GNU_SOURCE)
+# define GLOB_MAGCHAR	 (1 << 8)/* Set in gl_flags if any metachars seen.  */
+# define GLOB_ALTDIRFUNC (1 << 9)/* Use gl_opendir et al functions.  */
+# define GLOB_BRACE	 (1 << 10)/* Expand "{a,b}" to "a" "b".  */
+# define GLOB_NOMAGIC	 (1 << 11)/* If no magic chars, return the pattern.  */
+# define GLOB_TILDE	 (1 << 12)/* Expand ~user and ~ to home directories. */
+# define GLOB_ONLYDIR	 (1 << 13)/* Match only directories.  */
+# define GLOB_TILDE_CHECK (1 << 14)/* Like GLOB_TILDE but return an error
+				      if the user name is not available.  */
+# define __GLOB_FLAGS	(GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
+			 GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND|     \
+			 GLOB_PERIOD|GLOB_ALTDIRFUNC|GLOB_BRACE|     \
+			 GLOB_NOMAGIC|GLOB_TILDE|GLOB_ONLYDIR|GLOB_TILDE_CHECK)
+#else
+# define __GLOB_FLAGS	(GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
+			 GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND|     \
+			 GLOB_PERIOD)
+#endif
+
+/* Error returns from `glob'.  */
+#define	GLOB_NOSPACE	1	/* Ran out of memory.  */
+#define	GLOB_ABORTED	2	/* Read error.  */
+#define	GLOB_NOMATCH	3	/* No matches found.  */
+#define GLOB_NOSYS	4	/* Not implemented.  */
+#ifdef _GNU_SOURCE
+/* Previous versions of this file defined GLOB_ABEND instead of
+   GLOB_ABORTED.  Provide a compatibility definition here.  */
+# define GLOB_ABEND GLOB_ABORTED
+#endif
+
+/* Structure describing a globbing run.  */
+#if !defined _AMIGA && !defined VMS /* Buggy compiler.   */
+struct stat;
+#endif
+typedef struct
+  {
+    __size_t gl_pathc;		/* Count of paths matched by the pattern.  */
+    char **gl_pathv;		/* List of matched pathnames.  */
+    __size_t gl_offs;		/* Slots to reserve in `gl_pathv'.  */
+    int gl_flags;		/* Set to FLAGS, maybe | GLOB_MAGCHAR.  */
+
+    /* If the GLOB_ALTDIRFUNC flag is set, the following functions
+       are used instead of the normal file access functions.  */
+    void (*gl_closedir) __PMT ((void *));
+    struct dirent *(*gl_readdir) __PMT ((void *));
+    __ptr_t (*gl_opendir) __PMT ((__const char *));
+    int (*gl_lstat) __PMT ((__const char *, struct stat *));
+#if defined(VMS) && defined(__DECC) && !defined(_POSIX_C_SOURCE)
+    int (*gl_stat) __PMT ((__const char *, struct stat *, ...));
+#else
+    int (*gl_stat) __PMT ((__const char *, struct stat *));
+#endif
+  } glob_t;
+
+#ifdef _LARGEFILE64_SOURCE
+struct stat64;
+typedef struct
+  {
+    __size_t gl_pathc;
+    char **gl_pathv;
+    __size_t gl_offs;
+    int gl_flags;
+
+    /* If the GLOB_ALTDIRFUNC flag is set, the following functions
+       are used instead of the normal file access functions.  */
+    void (*gl_closedir) __PMT ((void *));
+    struct dirent64 *(*gl_readdir) __PMT ((void *));
+    __ptr_t (*gl_opendir) __PMT ((__const char *));
+    int (*gl_lstat) __PMT ((__const char *, struct stat64 *));
+    int (*gl_stat) __PMT ((__const char *, struct stat64 *));
+  } glob64_t;
+#endif
+
+#if _FILE_OFFSET_BITS == 64 && __GNUC__ < 2
+# define glob glob64
+# define globfree globfree64
+#else
+# ifdef _LARGEFILE64_SOURCE
+extern int glob64 __P ((__const char *__pattern, int __flags,
+			int (*__errfunc) (__const char *, int),
+			glob64_t *__pglob));
+
+extern void globfree64 __P ((glob64_t *__pglob));
+# endif
+#endif
+
+/* Do glob searching for PATTERN, placing results in PGLOB.
+   The bits defined above may be set in FLAGS.
+   If a directory cannot be opened or read and ERRFUNC is not nil,
+   it is called with the pathname that caused the error, and the
+   `errno' value from the failing call; if it returns non-zero
+   `glob' returns GLOB_ABEND; if it returns zero, the error is ignored.
+   If memory cannot be allocated for PGLOB, GLOB_NOSPACE is returned.
+   Otherwise, `glob' returns zero.  */
+#if _FILE_OFFSET_BITS != 64 || __GNUC__ < 2
+extern int glob __P ((__const char *__pattern, int __flags,
+		      int (*__errfunc) (__const char *, int),
+		      glob_t *__pglob));
+
+/* Free storage allocated in PGLOB by a previous `glob' call.  */
+extern void globfree __P ((glob_t *__pglob));
+#else
+extern int glob __P ((__const char *__pattern, int __flags,
+		      int (*__errfunc) (__const char *, int),
+		      glob_t *__pglob)) __asm__ ("glob64");
+
+extern void globfree __P ((glob_t *__pglob)) __asm__ ("globfree64");
+#endif
+
+
+#ifdef _GNU_SOURCE
+/* Return nonzero if PATTERN contains any metacharacters.
+   Metacharacters can be quoted with backslashes if QUOTE is nonzero.
+
+   This function is not part of the interface specified by POSIX.2
+   but several programs want to use it.  */
+extern int glob_pattern_p __P ((__const char *__pattern, int __quote));
+#endif
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* glob.h  */
diff --git a/gmk-default.h b/gmk-default.h
new file mode 100644
index 0000000..9fa09a6
--- /dev/null
+++ b/gmk-default.h
@@ -0,0 +1,28 @@
+static const char *const GUILE_module_defn = " \
+(define (to-string-maybe x) \
+  (cond \
+   ((or (not x) \
+        (unspecified? x) \
+        (variable? x) \
+        (null? x) \
+        (and (string? x) (string-null? x))) \
+    #f) \
+   ((eq? x #t) \"#t\") \
+   ((or (symbol? x) (number? x)) \
+    (object->string x)) \
+   ((char? x) \
+    (string x)) \
+   ((and (string? x) (string-every char-set:printing x)) \
+    x) \
+   (else (error \"Unknown object:\" x)))) \
+(define (obj-to-str x) \
+  (let ((acc '())) \
+    (define (walk x) \
+      (cond ((pair? x) (walk (car x)) (walk (cdr x))) \
+            ((to-string-maybe x) => (lambda (s) (set! acc (cons s acc)))))) \
+    (walk x) \
+    (string-join (reverse! acc)))) \
+(define (gmk-var v) \
+  (gmk-expand (format #f \"$(~a)\" (obj-to-str v)))) \
+(export gmk-expand gmk-eval gmk-var) \
+";
diff --git a/gmk-default.scm b/gmk-default.scm
new file mode 100644
index 0000000..fa19d3c
--- /dev/null
+++ b/gmk-default.scm
@@ -0,0 +1,53 @@
+;; Contents of the (gnu make) Guile module
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; This file is part of GNU Make.
+;;
+;; GNU Make is free software; you can redistribute it and/or modify it under
+;; the terms of the GNU General Public License as published by the Free
+;; Software Foundation; either version 3 of the License, or (at your option)
+;; any later version.
+;;
+;; GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+;; WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+;; FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+;; details.
+;;
+;; You should have received a copy of the GNU General Public License along
+;; with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+(define (to-string-maybe x)
+  (cond
+   ;; In GNU make, "false" is the empty string
+   ((or (not x)
+        (unspecified? x)
+        (variable? x)
+        (null? x)
+        (and (string? x) (string-null? x)))
+    #f)
+   ;; We want something not false... not sure about this
+   ((eq? x #t) "#t")
+   ;; Basics
+   ((or (symbol? x) (number? x))
+    (object->string x))
+   ((char? x)
+    (string x))
+   ;; Printable string (no special characters)
+   ((and (string? x) (string-every char-set:printing x))
+    x)
+   ;; No idea: fail
+   (else (error "Unknown object:" x))))
+
+(define (obj-to-str x)
+  (let ((acc '()))
+    (define (walk x)
+      (cond ((pair? x) (walk (car x)) (walk (cdr x)))
+            ((to-string-maybe x) => (lambda (s) (set! acc (cons s acc))))))
+    (walk x)
+    (string-join (reverse! acc))))
+
+;; Return the value of the GNU make variable V
+(define (gmk-var v)
+  (gmk-expand (format #f "$(~a)" (obj-to-str v))))
+
+;; Export the public interfaces
+(export gmk-expand gmk-eval gmk-var)
diff --git a/gnumake.h b/gnumake.h
new file mode 100644
index 0000000..fd0b3a4
--- /dev/null
+++ b/gnumake.h
@@ -0,0 +1,79 @@
+/* External interfaces usable by dynamic objects loaded into GNU Make.
+   --THIS API IS A "TECHNOLOGY PREVIEW" ONLY.  IT IS NOT A STABLE INTERFACE--
+
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _GNUMAKE_H_
+#define _GNUMAKE_H_
+
+/* Specify the location of elements read from makefiles.  */
+typedef struct
+  {
+    const char *filenm;
+    unsigned long lineno;
+  } gmk_floc;
+
+typedef char *(*gmk_func_ptr)(const char *nm, unsigned int argc, char **argv);
+
+#ifdef _WIN32
+# ifdef GMK_BUILDING_MAKE
+#  define GMK_EXPORT  __declspec(dllexport)
+# else
+#  define GMK_EXPORT  __declspec(dllimport)
+# endif
+#else
+# define GMK_EXPORT
+#endif
+
+/* Free memory returned by the gmk_expand() function.  */
+GMK_EXPORT void gmk_free (char *str);
+
+/* Allocate memory in GNU make's context.  */
+GMK_EXPORT char *gmk_alloc (unsigned int len);
+
+/* Run $(eval ...) on the provided string BUFFER.  */
+GMK_EXPORT void gmk_eval (const char *buffer, const gmk_floc *floc);
+
+/* Run GNU make expansion on the provided string STR.
+   Returns an allocated buffer that the caller must free with gmk_free().  */
+GMK_EXPORT char *gmk_expand (const char *str);
+
+/* Register a new GNU make function NAME (maximum of 255 chars long).
+   When the function is expanded in the makefile, FUNC will be invoked with
+   the appropriate arguments.
+
+   The return value of FUNC must be either NULL, in which case it expands to
+   the empty string, or a pointer to the result of the expansion in a string
+   created by gmk_alloc().  GNU make will free the memory when it's done.
+
+   MIN_ARGS is the minimum number of arguments the function requires.
+   MAX_ARGS is the maximum number of arguments (or 0 if there's no maximum).
+   MIN_ARGS and MAX_ARGS may not exceed 255.
+
+   The FLAGS value may be GMK_FUNC_DEFAULT, or one or more of the following
+   flags OR'd together:
+
+     GMK_FUNC_NOEXPAND: the arguments to the function will be not be expanded
+                        before FUNC is called.
+*/
+GMK_EXPORT void gmk_add_function (const char *name, gmk_func_ptr func,
+                                  unsigned int min_args, unsigned int max_args,
+                                  unsigned int flags);
+
+#define GMK_FUNC_DEFAULT    0x00
+#define GMK_FUNC_NOEXPAND   0x01
+
+#endif  /* _GNUMAKE_H_ */
diff --git a/guile.c b/guile.c
new file mode 100644
index 0000000..7c9a015
--- /dev/null
+++ b/guile.c
@@ -0,0 +1,159 @@
+/* GNU Guile interface for GNU Make.
+Copyright (C) 2011-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#ifdef HAVE_GUILE
+
+#include "gnumake.h"
+
+#include "debug.h"
+#include "filedef.h"
+#include "dep.h"
+#include "variable.h"
+
+#include <libguile.h>
+
+/* Pre-2.0 versions of Guile don't have a typedef for gsubr function types.  */
+#if SCM_MAJOR_VERSION < 2
+# define GSUBR_TYPE         SCM (*) ()
+/* Guile 1.x doesn't really support i18n.  */
+# define EVAL_STRING(_s)    scm_c_eval_string (_s)
+#else
+# define GSUBR_TYPE         scm_t_subr
+# define EVAL_STRING(_s)    scm_eval_string (scm_from_utf8_string (_s))
+#endif
+
+static SCM make_mod = SCM_EOL;
+static SCM obj_to_str = SCM_EOL;
+
+/* Convert an SCM object into a string.  */
+static char *
+cvt_scm_to_str (SCM obj)
+{
+  return scm_to_locale_string (scm_call_1 (obj_to_str, obj));
+}
+
+/* Perform the GNU make expansion function.  */
+static SCM
+guile_expand_wrapper (SCM obj)
+{
+  char *str = cvt_scm_to_str (obj);
+  SCM ret;
+  char *res;
+
+  DB (DB_BASIC, (_("guile: Expanding '%s'\n"), str));
+  res = gmk_expand (str);
+  ret = scm_from_locale_string (res);
+
+  free (str);
+  free (res);
+
+  return ret;
+}
+
+/* Perform the GNU make eval function.  */
+static SCM
+guile_eval_wrapper (SCM obj)
+{
+  char *str = cvt_scm_to_str (obj);
+
+  DB (DB_BASIC, (_("guile: Evaluating '%s'\n"), str));
+  gmk_eval (str, 0);
+
+  return SCM_BOOL_F;
+}
+
+/* Invoked by scm_c_define_module(), in the context of the GNU make module.  */
+static void
+guile_define_module (void *data UNUSED)
+{
+/* Ingest the predefined Guile module for GNU make.  */
+#include "gmk-default.h"
+
+  /* Register a subr for GNU make's eval capability.  */
+  scm_c_define_gsubr ("gmk-expand", 1, 0, 0, (GSUBR_TYPE) guile_expand_wrapper);
+
+  /* Register a subr for GNU make's eval capability.  */
+  scm_c_define_gsubr ("gmk-eval", 1, 0, 0, (GSUBR_TYPE) guile_eval_wrapper);
+
+  /* Define the rest of the module.  */
+  scm_c_eval_string (GUILE_module_defn);
+}
+
+/* Initialize the GNU make Guile module.  */
+static void *
+guile_init (void *arg UNUSED)
+{
+  /* Define the module.  */
+  make_mod = scm_c_define_module ("gnu make", guile_define_module, NULL);
+
+  /* Get a reference to the object-to-string translator, for later.  */
+  obj_to_str = scm_variable_ref (scm_c_module_lookup (make_mod, "obj-to-str"));
+
+  /* Import the GNU make module exports into the generic space.  */
+  scm_c_eval_string ("(use-modules (gnu make))");
+
+  return NULL;
+}
+
+static void *
+internal_guile_eval (void *arg)
+{
+  return cvt_scm_to_str (EVAL_STRING (arg));
+}
+
+/* This is the function registered with make  */
+static char *
+func_guile (const char *funcname UNUSED, unsigned int argc UNUSED, char **argv)
+{
+  static int init = 0;
+
+  if (! init)
+    {
+      /* Initialize the Guile interpreter.  */
+      scm_with_guile (guile_init, NULL);
+      init = 1;
+    }
+
+  if (argv[0] && argv[0][0] != '\0')
+    return scm_with_guile (internal_guile_eval, argv[0]);
+
+  return NULL;
+}
+
+/* ----- Public interface ----- */
+
+/* We could send the flocp to define_new_function(), but since guile is
+   "kind of" built-in, that didn't seem so useful.  */
+int
+guile_gmake_setup (const gmk_floc *flocp UNUSED)
+{
+  /* Create a make function "guile".  */
+  gmk_add_function ("guile", func_guile, 0, 1, GMK_FUNC_DEFAULT);
+
+  return 1;
+}
+
+#else
+
+int
+guile_gmake_setup (const gmk_floc *flocp UNUSED)
+{
+  return 1;
+}
+
+#endif
diff --git a/hash.c b/hash.c
new file mode 100644
index 0000000..7b4b271
--- /dev/null
+++ b/hash.c
@@ -0,0 +1,330 @@
+/* hash.c -- hash table maintenance
+Copyright (C) 1995, 1999, 2002, 2010 Free Software Foundation, Inc.
+Written by Greg McGary <gkm@gnu.org> <greg@mcgary.org>
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "hash.h"
+
+#define	CALLOC(t, n) ((t *) xcalloc (sizeof (t) * (n)))
+#define MALLOC(t, n) ((t *) xmalloc (sizeof (t) * (n)))
+#define REALLOC(o, t, n) ((t *) xrealloc ((o), sizeof (t) * (n)))
+#define CLONE(o, t, n) ((t *) memcpy (MALLOC (t, (n)), (o), sizeof (t) * (n)))
+
+static void hash_rehash __P((struct hash_table* ht));
+static unsigned long round_up_2 __P((unsigned long rough));
+
+/* Implement double hashing with open addressing.  The table size is
+   always a power of two.  The secondary ('increment') hash function
+   is forced to return an odd-value, in order to be relatively prime
+   to the table size.  This guarantees that the increment can
+   potentially hit every slot in the table during collision
+   resolution.  */
+
+void *hash_deleted_item = &hash_deleted_item;
+
+/* Force the table size to be a power of two, possibly rounding up the
+   given size.  */
+
+void
+hash_init (struct hash_table *ht, unsigned long size,
+           hash_func_t hash_1, hash_func_t hash_2, hash_cmp_func_t hash_cmp)
+{
+  ht->ht_size = round_up_2 (size);
+  ht->ht_empty_slots = ht->ht_size;
+  ht->ht_vec = (void**) CALLOC (struct token *, ht->ht_size);
+  if (ht->ht_vec == 0)
+    {
+      fprintf (stderr, _("can't allocate %lu bytes for hash table: memory exhausted"),
+	       ht->ht_size * (unsigned long) sizeof (struct token *));
+      exit (MAKE_TROUBLE);
+    }
+
+  ht->ht_capacity = ht->ht_size - (ht->ht_size / 16); /* 93.75% loading factor */
+  ht->ht_fill = 0;
+  ht->ht_collisions = 0;
+  ht->ht_lookups = 0;
+  ht->ht_rehashes = 0;
+  ht->ht_hash_1 = hash_1;
+  ht->ht_hash_2 = hash_2;
+  ht->ht_compare = hash_cmp;
+}
+
+/* Load an array of items into 'ht'.  */
+
+void
+hash_load (struct hash_table *ht, void *item_table,
+           unsigned long cardinality, unsigned long size)
+{
+  char *items = (char *) item_table;
+  while (cardinality--)
+    {
+      hash_insert (ht, items);
+      items += size;
+    }
+}
+
+/* Returns the address of the table slot matching 'key'.  If 'key' is
+   not found, return the address of an empty slot suitable for
+   inserting 'key'.  The caller is responsible for incrementing
+   ht_fill on insertion.  */
+
+void **
+hash_find_slot (struct hash_table *ht, const void *key)
+{
+  void **slot;
+  void **deleted_slot = 0;
+  unsigned int hash_2 = 0;
+  unsigned int hash_1 = (*ht->ht_hash_1) (key);
+
+  ht->ht_lookups++;
+  for (;;)
+    {
+      hash_1 &= (ht->ht_size - 1);
+      slot = &ht->ht_vec[hash_1];
+
+      if (*slot == 0)
+	return (deleted_slot ? deleted_slot : slot);
+      if (*slot == hash_deleted_item)
+	{
+	  if (deleted_slot == 0)
+	    deleted_slot = slot;
+	}
+      else
+	{
+	  if (key == *slot)
+	    return slot;
+	  if ((*ht->ht_compare) (key, *slot) == 0)
+	    return slot;
+	  ht->ht_collisions++;
+	}
+      if (!hash_2)
+	  hash_2 = (*ht->ht_hash_2) (key) | 1;
+      hash_1 += hash_2;
+    }
+}
+
+void *
+hash_find_item (struct hash_table *ht, const void *key)
+{
+  void **slot = hash_find_slot (ht, key);
+  return ((HASH_VACANT (*slot)) ? 0 : *slot);
+}
+
+void *
+hash_insert (struct hash_table *ht, const void *item)
+{
+  void **slot = hash_find_slot (ht, item);
+  const void *old_item = *slot;
+  hash_insert_at (ht, item, slot);
+  return (void *)((HASH_VACANT (old_item)) ? 0 : old_item);
+}
+
+void *
+hash_insert_at (struct hash_table *ht, const void *item, const void *slot)
+{
+  const void *old_item = *(void **) slot;
+  if (HASH_VACANT (old_item))
+    {
+      ht->ht_fill++;
+      if (old_item == 0)
+	ht->ht_empty_slots--;
+      old_item = item;
+    }
+  *(void const **) slot = item;
+  if (ht->ht_empty_slots < ht->ht_size - ht->ht_capacity)
+    {
+      hash_rehash (ht);
+      return (void *) hash_find_slot (ht, item);
+    }
+  else
+    return (void *) slot;
+}
+
+void *
+hash_delete (struct hash_table *ht, const void *item)
+{
+  void **slot = hash_find_slot (ht, item);
+  return hash_delete_at (ht, slot);
+}
+
+void *
+hash_delete_at (struct hash_table *ht, const void *slot)
+{
+  void *item = *(void **) slot;
+  if (!HASH_VACANT (item))
+    {
+      *(void const **) slot = hash_deleted_item;
+      ht->ht_fill--;
+      return item;
+    }
+  else
+    return 0;
+}
+
+void
+hash_free_items (struct hash_table *ht)
+{
+  void **vec = ht->ht_vec;
+  void **end = &vec[ht->ht_size];
+  for (; vec < end; vec++)
+    {
+      void *item = *vec;
+      if (!HASH_VACANT (item))
+	free (item);
+      *vec = 0;
+    }
+  ht->ht_fill = 0;
+  ht->ht_empty_slots = ht->ht_size;
+}
+
+void
+hash_delete_items (struct hash_table *ht)
+{
+  void **vec = ht->ht_vec;
+  void **end = &vec[ht->ht_size];
+  for (; vec < end; vec++)
+    *vec = 0;
+  ht->ht_fill = 0;
+  ht->ht_collisions = 0;
+  ht->ht_lookups = 0;
+  ht->ht_rehashes = 0;
+  ht->ht_empty_slots = ht->ht_size;
+}
+
+void
+hash_free (struct hash_table *ht, int free_items)
+{
+  if (free_items)
+    hash_free_items (ht);
+  else
+    {
+      ht->ht_fill = 0;
+      ht->ht_empty_slots = ht->ht_size;
+    }
+  free (ht->ht_vec);
+  ht->ht_vec = 0;
+  ht->ht_capacity = 0;
+}
+
+void
+hash_map (struct hash_table *ht, hash_map_func_t map)
+{
+  void **slot;
+  void **end = &ht->ht_vec[ht->ht_size];
+
+  for (slot = ht->ht_vec; slot < end; slot++)
+    {
+      if (!HASH_VACANT (*slot))
+	(*map) (*slot);
+    }
+}
+
+void
+hash_map_arg (struct hash_table *ht, hash_map_arg_func_t map, void *arg)
+{
+  void **slot;
+  void **end = &ht->ht_vec[ht->ht_size];
+
+  for (slot = ht->ht_vec; slot < end; slot++)
+    {
+      if (!HASH_VACANT (*slot))
+	(*map) (*slot, arg);
+    }
+}
+
+/* Double the size of the hash table in the event of overflow... */
+
+static void
+hash_rehash (struct hash_table *ht)
+{
+  unsigned long old_ht_size = ht->ht_size;
+  void **old_vec = ht->ht_vec;
+  void **ovp;
+
+  if (ht->ht_fill >= ht->ht_capacity)
+    {
+      ht->ht_size *= 2;
+      ht->ht_capacity = ht->ht_size - (ht->ht_size >> 4);
+    }
+  ht->ht_rehashes++;
+  ht->ht_vec = (void **) CALLOC (struct token *, ht->ht_size);
+
+  for (ovp = old_vec; ovp < &old_vec[old_ht_size]; ovp++)
+    {
+      if (! HASH_VACANT (*ovp))
+	{
+	  void **slot = hash_find_slot (ht, *ovp);
+	  *slot = *ovp;
+	}
+    }
+  ht->ht_empty_slots = ht->ht_size - ht->ht_fill;
+  free (old_vec);
+}
+
+void
+hash_print_stats (struct hash_table *ht, FILE *out_FILE)
+{
+  /* GKM FIXME: honor NO_FLOAT */
+  fprintf (out_FILE, _("Load=%ld/%ld=%.0f%%, "), ht->ht_fill, ht->ht_size,
+	   100.0 * (double) ht->ht_fill / (double) ht->ht_size);
+  fprintf (out_FILE, _("Rehash=%d, "), ht->ht_rehashes);
+  fprintf (out_FILE, _("Collisions=%ld/%ld=%.0f%%"), ht->ht_collisions, ht->ht_lookups,
+	   (ht->ht_lookups
+	    ? (100.0 * (double) ht->ht_collisions / (double) ht->ht_lookups)
+	    : 0));
+}
+
+/* Dump all items into a NULL-terminated vector.  Use the
+   user-supplied vector, or malloc one.  */
+
+void **
+hash_dump (struct hash_table *ht, void **vector_0, qsort_cmp_t compare)
+{
+  void **vector;
+  void **slot;
+  void **end = &ht->ht_vec[ht->ht_size];
+
+  if (vector_0 == 0)
+    vector_0 = MALLOC (void *, ht->ht_fill + 1);
+  vector = vector_0;
+
+  for (slot = ht->ht_vec; slot < end; slot++)
+    if (!HASH_VACANT (*slot))
+      *vector++ = *slot;
+  *vector = 0;
+
+  if (compare)
+    qsort (vector_0, ht->ht_fill, sizeof (void *), compare);
+  return vector_0;
+}
+
+/* Round a given number up to the nearest power of 2. */
+
+static unsigned long
+round_up_2 (unsigned long n)
+{
+  n |= (n >> 1);
+  n |= (n >> 2);
+  n |= (n >> 4);
+  n |= (n >> 8);
+  n |= (n >> 16);
+
+#if !defined(HAVE_LIMITS_H) || ULONG_MAX > 4294967295
+  /* We only need this on systems where unsigned long is >32 bits.  */
+  n |= (n >> 32);
+#endif
+
+  return n + 1;
+}
diff --git a/hash.h b/hash.h
new file mode 100644
index 0000000..960cbd7
--- /dev/null
+++ b/hash.h
@@ -0,0 +1,234 @@
+/* hash.h -- decls for hash table
+Copyright (C) 1995, 1999, 2002, 2010 Free Software Foundation, Inc.
+Written by Greg McGary <gkm@gnu.org> <greg@mcgary.org>
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _hash_h_
+#define _hash_h_
+
+#include <stdio.h>
+#include <ctype.h>
+
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__ || !defined __P
+#  undef	__P
+#  define __P(protos)	protos
+# endif
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# define __P(protos)	()
+/* We can get away without defining 'const' here only because in this file
+   it is used only inside the prototype for 'fnmatch', which is elided in
+   non-ANSI C where 'const' is problematical.  */
+#endif /* C++ or ANSI C.  */
+
+typedef unsigned long (*hash_func_t) __P((void const *key));
+typedef int (*hash_cmp_func_t) __P((void const *x, void const *y));
+typedef void (*hash_map_func_t) __P((void const *item));
+typedef void (*hash_map_arg_func_t) __P((void const *item, void *arg));
+
+struct hash_table
+{
+  void **ht_vec;
+  hash_func_t ht_hash_1;	/* primary hash function */
+  hash_func_t ht_hash_2;	/* secondary hash function */
+  hash_cmp_func_t ht_compare;	/* comparison function */
+  unsigned long ht_size;	/* total number of slots (power of 2) */
+  unsigned long ht_capacity;	/* usable slots, limited by loading-factor */
+  unsigned long ht_fill;	/* items in table */
+  unsigned long ht_empty_slots;	/* empty slots not including deleted slots */
+  unsigned long ht_collisions;	/* # of failed calls to comparison function */
+  unsigned long ht_lookups;	/* # of queries */
+  unsigned int ht_rehashes;	/* # of times we've expanded table */
+};
+
+typedef int (*qsort_cmp_t) __P((void const *, void const *));
+
+void hash_init __P((struct hash_table *ht, unsigned long size,
+		    hash_func_t hash_1, hash_func_t hash_2, hash_cmp_func_t hash_cmp));
+void hash_load __P((struct hash_table *ht, void *item_table,
+		    unsigned long cardinality, unsigned long size));
+void **hash_find_slot __P((struct hash_table *ht, void const *key));
+void *hash_find_item __P((struct hash_table *ht, void const *key));
+void *hash_insert __P((struct hash_table *ht, const void *item));
+void *hash_insert_at __P((struct hash_table *ht, const void *item, void const *slot));
+void *hash_delete __P((struct hash_table *ht, void const *item));
+void *hash_delete_at __P((struct hash_table *ht, void const *slot));
+void hash_delete_items __P((struct hash_table *ht));
+void hash_free_items __P((struct hash_table *ht));
+void hash_free __P((struct hash_table *ht, int free_items));
+void hash_map __P((struct hash_table *ht, hash_map_func_t map));
+void hash_map_arg __P((struct hash_table *ht, hash_map_arg_func_t map, void *arg));
+void hash_print_stats __P((struct hash_table *ht, FILE *out_FILE));
+void **hash_dump __P((struct hash_table *ht, void **vector_0, qsort_cmp_t compare));
+
+extern void *hash_deleted_item;
+#define HASH_VACANT(item) ((item) == 0 || (void *) (item) == hash_deleted_item)
+
+
+/* hash and comparison macros for case-sensitive string keys. */
+
+/* Due to the strcache, it's not uncommon for the string pointers to
+   be identical.  Take advantage of that to short-circuit string compares.  */
+
+#define STRING_HASH_1(KEY, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  while (*++_key_) \
+    (RESULT) += (*_key_ << (_key_[1] & 0xf)); \
+} while (0)
+#define return_STRING_HASH_1(KEY) do { \
+  unsigned long _result_ = 0; \
+  STRING_HASH_1 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define STRING_HASH_2(KEY, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  while (*++_key_) \
+    (RESULT) += (*_key_ << (_key_[1] & 0x7)); \
+} while (0)
+#define return_STRING_HASH_2(KEY) do { \
+  unsigned long _result_ = 0; \
+  STRING_HASH_2 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define STRING_COMPARE(X, Y, RESULT) do { \
+    RESULT = (X) == (Y) ? 0 : strcmp ((X), (Y)); \
+} while (0)
+#define return_STRING_COMPARE(X, Y) do { \
+  return (X) == (Y) ? 0 : strcmp ((X), (Y)); \
+} while (0)
+
+
+#define STRING_N_HASH_1(KEY, N, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  int _n_ = (N); \
+  if (_n_) \
+    while (--_n_ && *++_key_) \
+      (RESULT) += (*_key_ << (_key_[1] & 0xf)); \
+  (RESULT) += *++_key_; \
+} while (0)
+#define return_STRING_N_HASH_1(KEY, N) do { \
+  unsigned long _result_ = 0; \
+  STRING_N_HASH_1 ((KEY), (N), _result_); \
+  return _result_; \
+} while (0)
+
+#define STRING_N_HASH_2(KEY, N, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  int _n_ = (N); \
+  if (_n_) \
+    while (--_n_ && *++_key_) \
+      (RESULT) += (*_key_ << (_key_[1] & 0x7)); \
+  (RESULT) += *++_key_; \
+} while (0)
+#define return_STRING_N_HASH_2(KEY, N) do { \
+  unsigned long _result_ = 0; \
+  STRING_N_HASH_2 ((KEY), (N), _result_); \
+  return _result_; \
+} while (0)
+
+#define STRING_N_COMPARE(X, Y, N, RESULT) do { \
+  RESULT = (X) == (Y) ? 0 : strncmp ((X), (Y), (N)); \
+} while (0)
+#define return_STRING_N_COMPARE(X, Y, N) do { \
+  return (X) == (Y) ? 0 : strncmp ((X), (Y), (N)); \
+} while (0)
+
+#ifdef HAVE_CASE_INSENSITIVE_FS
+
+/* hash and comparison macros for case-insensitive string _key_s. */
+
+#define ISTRING_HASH_1(KEY, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  while (*++_key_) \
+    (RESULT) += ((isupper (*_key_) ? tolower (*_key_) : *_key_) << (_key_[1] & 0xf)); \
+} while (0)
+#define return_ISTRING_HASH_1(KEY) do { \
+  unsigned long _result_ = 0; \
+  ISTRING_HASH_1 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define ISTRING_HASH_2(KEY, RESULT) do { \
+  unsigned char const *_key_ = (unsigned char const *) (KEY) - 1; \
+  while (*++_key_) \
+    (RESULT) += ((isupper (*_key_) ? tolower (*_key_) : *_key_) << (_key_[1] & 0x7)); \
+} while (0)
+#define return_ISTRING_HASH_2(KEY) do { \
+  unsigned long _result_ = 0; \
+  ISTRING_HASH_2 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define ISTRING_COMPARE(X, Y, RESULT) do { \
+  RESULT = (X) == (Y) ? 0 : strcasecmp ((X), (Y)); \
+} while (0)
+#define return_ISTRING_COMPARE(X, Y) do { \
+  return (X) == (Y) ? 0 : strcasecmp ((X), (Y)); \
+} while (0)
+
+#else
+
+#define ISTRING_HASH_1(KEY, RESULT) STRING_HASH_1 ((KEY), (RESULT))
+#define return_ISTRING_HASH_1(KEY) return_STRING_HASH_1 (KEY)
+
+#define ISTRING_HASH_2(KEY, RESULT) STRING_HASH_2 ((KEY), (RESULT))
+#define return_ISTRING_HASH_2(KEY) return_STRING_HASH_2 (KEY)
+
+#define ISTRING_COMPARE(X, Y, RESULT) STRING_COMPARE ((X), (Y), (RESULT))
+#define return_ISTRING_COMPARE(X, Y) return_STRING_COMPARE ((X), (Y))
+
+#endif
+
+/* hash and comparison macros for integer _key_s. */
+
+#define INTEGER_HASH_1(KEY, RESULT) do { \
+  (RESULT) += ((unsigned long)(KEY)); \
+} while (0)
+#define return_INTEGER_HASH_1(KEY) do { \
+  unsigned long _result_ = 0; \
+  INTEGER_HASH_1 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define INTEGER_HASH_2(KEY, RESULT) do { \
+  (RESULT) += ~((unsigned long)(KEY)); \
+} while (0)
+#define return_INTEGER_HASH_2(KEY) do { \
+  unsigned long _result_ = 0; \
+  INTEGER_HASH_2 ((KEY), _result_); \
+  return _result_; \
+} while (0)
+
+#define INTEGER_COMPARE(X, Y, RESULT) do { \
+  (RESULT) = X - Y; \
+} while (0)
+#define return_INTEGER_COMPARE(X, Y) do { \
+  int _result_; \
+  INTEGER_COMPARE (X, Y, _result_); \
+  return _result_; \
+} while (0)
+
+/* hash and comparison macros for address keys. */
+
+#define ADDRESS_HASH_1(KEY, RESULT) INTEGER_HASH_1 (((unsigned long)(KEY)) >> 3, (RESULT))
+#define ADDRESS_HASH_2(KEY, RESULT) INTEGER_HASH_2 (((unsigned long)(KEY)) >> 3, (RESULT))
+#define ADDRESS_COMPARE(X, Y, RESULT) INTEGER_COMPARE ((X), (Y), (RESULT))
+#define return_ADDRESS_HASH_1(KEY) return_INTEGER_HASH_1 (((unsigned long)(KEY)) >> 3)
+#define return_ADDRESS_HASH_2(KEY) return_INTEGER_HASH_2 (((unsigned long)(KEY)) >> 3)
+#define return_ADDRESS_COMPARE(X, Y) return_INTEGER_COMPARE ((X), (Y))
+
+#endif /* not _hash_h_ */
diff --git a/implicit.c b/implicit.c
new file mode 100644
index 0000000..8e1d541
--- /dev/null
+++ b/implicit.c
@@ -0,0 +1,998 @@
+/* Implicit rule searching for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "rule.h"
+#include "dep.h"
+#include "debug.h"
+#include "variable.h"
+#include "job.h"      /* struct child, used inside commands.h */
+#include "commands.h" /* set_file_variables */
+
+static int pattern_search (struct file *file, int archive,
+                           unsigned int depth, unsigned int recursions);
+
+/* For a FILE which has no commands specified, try to figure out some
+   from the implicit pattern rules.
+   Returns 1 if a suitable implicit rule was found,
+   after modifying FILE to contain the appropriate commands and deps,
+   or returns 0 if no implicit rule was found.  */
+
+int
+try_implicit_rule (struct file *file, unsigned int depth)
+{
+  DBF (DB_IMPLICIT, _("Looking for an implicit rule for '%s'.\n"));
+
+  /* The order of these searches was previously reversed.  My logic now is
+     that since the non-archive search uses more information in the target
+     (the archive search omits the archive name), it is more specific and
+     should come first.  */
+
+  if (pattern_search (file, 0, depth, 0))
+    return 1;
+
+#ifndef NO_ARCHIVES
+  /* If this is an archive member reference, use just the
+     archive member name to search for implicit rules.  */
+  if (ar_name (file->name))
+    {
+      DBF (DB_IMPLICIT,
+           _("Looking for archive-member implicit rule for '%s'.\n"));
+      if (pattern_search (file, 1, depth, 0))
+        return 1;
+    }
+#endif
+
+  return 0;
+}
+
+
+/* Scans the BUFFER for the next word with whitespace as a separator.
+   Returns the pointer to the beginning of the word. LENGTH hold the
+   length of the word.  */
+
+static const char *
+get_next_word (const char *buffer, unsigned int *length)
+{
+  const char *p = buffer, *beg;
+  char c;
+
+  /* Skip any leading whitespace.  */
+  while (isblank ((unsigned char)*p))
+    ++p;
+
+  beg = p;
+  c = *(p++);
+
+  if (c == '\0')
+    return 0;
+
+
+  /* We already found the first value of "c", above.  */
+  while (1)
+    {
+      char closeparen;
+      int count;
+
+      switch (c)
+        {
+        case '\0':
+        case ' ':
+        case '\t':
+          goto done_word;
+
+        case '$':
+          c = *(p++);
+          if (c == '$')
+            break;
+
+          /* This is a variable reference, so read it to the matching
+             close paren.  */
+
+          if (c == '(')
+            closeparen = ')';
+          else if (c == '{')
+            closeparen = '}';
+          else
+            /* This is a single-letter variable reference.  */
+            break;
+
+          for (count = 0; *p != '\0'; ++p)
+            {
+              if (*p == c)
+                ++count;
+              else if (*p == closeparen && --count < 0)
+                {
+                  ++p;
+                  break;
+                }
+            }
+          break;
+
+        case '|':
+          goto done;
+
+        default:
+          break;
+        }
+
+      c = *(p++);
+    }
+ done_word:
+  --p;
+
+ done:
+  if (length)
+    *length = p - beg;
+
+  return beg;
+}
+
+/* This structure stores information about the expanded prerequisites for a
+   pattern rule.  NAME is always set to the strcache'd name of the prereq.
+   FILE and PATTERN will be set for intermediate files only.  IGNORE_MTIME is
+   copied from the prerequisite we expanded.
+ */
+struct patdeps
+  {
+    const char *name;
+    const char *pattern;
+    struct file *file;
+    unsigned int ignore_mtime : 1;
+  };
+
+/* This structure stores information about pattern rules that we need
+   to try.
+*/
+struct tryrule
+  {
+    struct rule *rule;
+
+    /* Index of the target in this rule that matched the file. */
+    unsigned int matches;
+
+    /* Stem length for this match. */
+    unsigned int stemlen;
+
+    /* Definition order of this rule. Used to implement stable sort.*/
+    unsigned int order;
+
+    /* Nonzero if the LASTSLASH logic was used in matching this rule. */
+    char checked_lastslash;
+  };
+
+int
+stemlen_compare (const void *v1, const void *v2)
+{
+  const struct tryrule *r1 = v1;
+  const struct tryrule *r2 = v2;
+  int r = r1->stemlen - r2->stemlen;
+  return r != 0 ? r : (int)(r1->order - r2->order);
+}
+
+/* Search the pattern rules for a rule with an existing dependency to make
+   FILE.  If a rule is found, the appropriate commands and deps are put in FILE
+   and 1 is returned.  If not, 0 is returned.
+
+   If ARCHIVE is nonzero, FILE->name is of the form "LIB(MEMBER)".  A rule for
+   "(MEMBER)" will be searched for, and "(MEMBER)" will not be chopped up into
+   directory and filename parts.
+
+   If an intermediate file is found by pattern search, the intermediate file
+   is set up as a target by the recursive call and is also made a dependency
+   of FILE.
+
+   DEPTH is used for debugging messages.  */
+
+static int
+pattern_search (struct file *file, int archive,
+                unsigned int depth, unsigned int recursions)
+{
+  /* Filename we are searching for a rule for.  */
+  const char *filename = archive ? strchr (file->name, '(') : file->name;
+
+  /* Length of FILENAME.  */
+  unsigned int namelen = strlen (filename);
+
+  /* The last slash in FILENAME (or nil if there is none).  */
+  const char *lastslash;
+
+  /* This is a file-object used as an argument in
+     recursive calls.  It never contains any data
+     except during a recursive call.  */
+  struct file *int_file = 0;
+
+  /* List of dependencies found recursively.  */
+  unsigned int max_deps = max_pattern_deps;
+  struct patdeps *deplist = xmalloc (max_deps * sizeof (struct patdeps));
+  struct patdeps *pat = deplist;
+
+  /* Names of possible dependencies are constructed in this buffer.  */
+  char *depname = alloca (namelen + max_pattern_dep_length);
+
+  /* The start and length of the stem of FILENAME for the current rule.  */
+  const char *stem = 0;
+  unsigned int stemlen = 0;
+  unsigned int fullstemlen = 0;
+
+  /* Buffer in which we store all the rules that are possibly applicable.  */
+  struct tryrule *tryrules = xmalloc (num_pattern_rules * max_pattern_targets
+                                      * sizeof (struct tryrule));
+
+  /* Number of valid elements in TRYRULES.  */
+  unsigned int nrules;
+
+  /* The index in TRYRULES of the rule we found.  */
+  unsigned int foundrule;
+
+  /* Nonzero if should consider intermediate files as dependencies.  */
+  int intermed_ok;
+
+  /* Nonzero if we have initialized file variables for this target.  */
+  int file_vars_initialized = 0;
+
+  /* Nonzero if we have matched a pattern-rule target
+     that is not just '%'.  */
+  int specific_rule_matched = 0;
+
+  unsigned int ri;  /* uninit checks OK */
+  struct rule *rule;
+
+  char *pathdir = NULL;
+  unsigned long pathlen;
+
+  PATH_VAR (stem_str); /* @@ Need to get rid of stem, stemlen, etc. */
+
+#ifndef NO_ARCHIVES
+  if (archive || ar_name (filename))
+    lastslash = 0;
+  else
+#endif
+    {
+      /* Set LASTSLASH to point at the last slash in FILENAME
+         but not counting any slash at the end.  (foo/bar/ counts as
+         bar/ in directory foo/, not empty in directory foo/bar/.)  */
+#ifdef VMS
+      lastslash = strrchr (filename, ']');
+      if (lastslash == 0)
+        lastslash = strrchr (filename, ':');
+#else
+      lastslash = strrchr (filename, '/');
+#ifdef HAVE_DOS_PATHS
+      /* Handle backslashes (possibly mixed with forward slashes)
+         and the case of "d:file".  */
+      {
+        char *bslash = strrchr (filename, '\\');
+        if (lastslash == 0 || bslash > lastslash)
+          lastslash = bslash;
+        if (lastslash == 0 && filename[0] && filename[1] == ':')
+          lastslash = filename + 1;
+      }
+#endif
+#endif
+      if (lastslash != 0 && lastslash[1] == '\0')
+        lastslash = 0;
+    }
+
+  pathlen = lastslash - filename + 1;
+
+  /* First see which pattern rules match this target and may be considered.
+     Put them in TRYRULES.  */
+
+  nrules = 0;
+  for (rule = pattern_rules; rule != 0; rule = rule->next)
+    {
+      unsigned int ti;
+
+      /* If the pattern rule has deps but no commands, ignore it.
+         Users cancel built-in rules by redefining them without commands.  */
+      if (rule->deps != 0 && rule->cmds == 0)
+        continue;
+
+      /* If this rule is in use by a parent pattern_search,
+         don't use it here.  */
+      if (rule->in_use)
+        {
+          DBS (DB_IMPLICIT, (_("Avoiding implicit rule recursion.\n")));
+          continue;
+        }
+
+      for (ti = 0; ti < rule->num; ++ti)
+        {
+          const char *target = rule->targets[ti];
+          const char *suffix = rule->suffixes[ti];
+          int check_lastslash;
+
+          /* Rules that can match any filename and are not terminal
+             are ignored if we're recursing, so that they cannot be
+             intermediate files.  */
+          if (recursions > 0 && target[1] == '\0' && !rule->terminal)
+            continue;
+
+          if (rule->lens[ti] > namelen)
+            /* It can't possibly match.  */
+            continue;
+
+          /* From the lengths of the filename and the pattern parts,
+             find the stem: the part of the filename that matches the %.  */
+          stem = filename + (suffix - target - 1);
+          stemlen = namelen - rule->lens[ti] + 1;
+
+          /* Set CHECK_LASTSLASH if FILENAME contains a directory
+             prefix and the target pattern does not contain a slash.  */
+
+          check_lastslash = 0;
+          if (lastslash)
+            {
+#ifdef VMS
+              check_lastslash = (strchr (target, ']') == 0
+                                 && strchr (target, ':') == 0);
+#else
+              check_lastslash = strchr (target, '/') == 0;
+#ifdef HAVE_DOS_PATHS
+              /* Didn't find it yet: check for DOS-type directories.  */
+              if (check_lastslash)
+                {
+                  char *b = strchr (target, '\\');
+                  check_lastslash = !(b || (target[0] && target[1] == ':'));
+                }
+#endif
+#endif
+            }
+          if (check_lastslash)
+            {
+              /* If so, don't include the directory prefix in STEM here.  */
+              if (pathlen > stemlen)
+                continue;
+              stemlen -= pathlen;
+              stem += pathlen;
+            }
+
+          /* Check that the rule pattern matches the text before the stem.  */
+          if (check_lastslash)
+            {
+              if (stem > (lastslash + 1)
+                  && !strneq (target, lastslash + 1, stem - lastslash - 1))
+                continue;
+            }
+          else if (stem > filename
+                   && !strneq (target, filename, stem - filename))
+            continue;
+
+          /* Check that the rule pattern matches the text after the stem.
+             We could test simply use streq, but this way we compare the
+             first two characters immediately.  This saves time in the very
+             common case where the first character matches because it is a
+             period.  */
+          if (*suffix != stem[stemlen]
+              || (*suffix != '\0' && !streq (&suffix[1], &stem[stemlen + 1])))
+            continue;
+
+          /* Record if we match a rule that not all filenames will match.  */
+          if (target[1] != '\0')
+            specific_rule_matched = 1;
+
+          /* A rule with no dependencies and no commands exists solely to set
+             specific_rule_matched when it matches.  Don't try to use it.  */
+          if (rule->deps == 0 && rule->cmds == 0)
+            continue;
+
+          /* Record this rule in TRYRULES and the index of the matching
+             target in MATCHES.  If several targets of the same rule match,
+             that rule will be in TRYRULES more than once.  */
+          tryrules[nrules].rule = rule;
+          tryrules[nrules].matches = ti;
+          tryrules[nrules].stemlen = stemlen + (check_lastslash ? pathlen : 0);
+          tryrules[nrules].order = nrules;
+          tryrules[nrules].checked_lastslash = check_lastslash;
+          ++nrules;
+        }
+    }
+
+  /* Bail out early if we haven't found any rules. */
+  if (nrules == 0)
+    goto done;
+
+  /* Sort the rules to place matches with the shortest stem first. This
+     way the most specific rules will be tried first. */
+  if (nrules > 1)
+    qsort (tryrules, nrules, sizeof (struct tryrule), stemlen_compare);
+
+  /* If we have found a matching rule that won't match all filenames,
+     retroactively reject any non-"terminal" rules that do always match.  */
+  if (specific_rule_matched)
+    for (ri = 0; ri < nrules; ++ri)
+      if (!tryrules[ri].rule->terminal)
+        {
+          unsigned int j;
+          for (j = 0; j < tryrules[ri].rule->num; ++j)
+            if (tryrules[ri].rule->targets[j][1] == '\0')
+              {
+                tryrules[ri].rule = 0;
+                break;
+              }
+        }
+
+  /* Try each rule once without intermediate files, then once with them.  */
+  for (intermed_ok = 0; intermed_ok < 2; ++intermed_ok)
+    {
+      pat = deplist;
+
+      /* Try each pattern rule till we find one that applies.  If it does,
+         expand its dependencies (as substituted) and chain them in DEPS.  */
+      for (ri = 0; ri < nrules; ri++)
+        {
+          struct dep *dep;
+          int check_lastslash;
+          unsigned int failed = 0;
+          int file_variables_set = 0;
+          unsigned int deps_found = 0;
+          /* NPTR points to the part of the prereq we haven't processed.  */
+          const char *nptr = 0;
+          const char *dir = NULL;
+          int order_only = 0;
+          unsigned int matches;
+
+          rule = tryrules[ri].rule;
+
+          /* RULE is nil when we discover that a rule, already placed in
+             TRYRULES, should not be applied.  */
+          if (rule == 0)
+            continue;
+
+          /* Reject any terminal rules if we're looking to make intermediate
+             files.  */
+          if (intermed_ok && rule->terminal)
+            continue;
+
+          /* From the lengths of the filename and the matching pattern parts,
+             find the stem: the part of the filename that matches the %.  */
+          matches = tryrules[ri].matches;
+          stem = filename + (rule->suffixes[matches]
+                             - rule->targets[matches]) - 1;
+          stemlen = (namelen - rule->lens[matches]) + 1;
+          check_lastslash = tryrules[ri].checked_lastslash;
+          if (check_lastslash)
+            {
+              stem += pathlen;
+              stemlen -= pathlen;
+
+              /* We need to add the directory prefix, so set it up.  */
+              if (! pathdir)
+                {
+                  pathdir = alloca (pathlen + 1);
+                  memcpy (pathdir, filename, pathlen);
+                  pathdir[pathlen] = '\0';
+                }
+              dir = pathdir;
+            }
+
+          if (stemlen > GET_PATH_MAX)
+            {
+              DBS (DB_IMPLICIT, (_("Stem too long: '%.*s'.\n"),
+                                 (int) stemlen, stem));
+              continue;
+            }
+
+          DBS (DB_IMPLICIT, (_("Trying pattern rule with stem '%.*s'.\n"),
+                             (int) stemlen, stem));
+
+          strncpy (stem_str, stem, stemlen);
+          stem_str[stemlen] = '\0';
+
+          /* If there are no prerequisites, then this rule matches.  */
+          if (rule->deps == 0)
+            break;
+
+          /* Temporary assign STEM to file->stem (needed to set file
+             variables below).   */
+          file->stem = stem_str;
+
+          /* Mark this rule as in use so a recursive pattern_search won't try
+             to use it.  */
+          rule->in_use = 1;
+
+          /* Try each prerequisite; see if it exists or can be created.  We'll
+             build a list of prereq info in DEPLIST.  Due to 2nd expansion we
+             may have to process multiple prereqs for a single dep entry.  */
+
+          pat = deplist;
+          dep = rule->deps;
+          nptr = dep_name (dep);
+          while (1)
+            {
+              struct dep *dl, *d;
+              char *p;
+
+              /* If we're out of name to parse, start the next prereq.  */
+              if (! nptr)
+                {
+                  dep = dep->next;
+                  if (dep == 0)
+                    break;
+                  nptr = dep_name (dep);
+                }
+
+              /* If we don't need a second expansion, just replace the %.  */
+              if (! dep->need_2nd_expansion)
+                {
+                  p = strchr (nptr, '%');
+                  if (p == 0)
+                    strcpy (depname, nptr);
+                  else
+                    {
+                      char *o = depname;
+                      if (check_lastslash)
+                        {
+                          memcpy (o, filename, pathlen);
+                          o += pathlen;
+                        }
+                      memcpy (o, nptr, p - nptr);
+                      o += p - nptr;
+                      memcpy (o, stem_str, stemlen);
+                      o += stemlen;
+                      strcpy (o, p + 1);
+                    }
+
+                  /* Parse the expanded string.  It might have wildcards.  */
+                  p = depname;
+                  dl = PARSE_SIMPLE_SEQ (&p, struct dep);
+                  for (d = dl; d != NULL; d = d->next)
+                    {
+                      ++deps_found;
+                      d->ignore_mtime = dep->ignore_mtime;
+                    }
+
+                  /* We've used up this dep, so next time get a new one.  */
+                  nptr = 0;
+                }
+
+              /* We have to perform second expansion on this prereq.  In an
+                 ideal world we would take the dependency line, substitute the
+                 stem, re-expand the whole line and chop it into individual
+                 prerequisites.  Unfortunately this won't work because of the
+                 "check_lastslash" twist.  Instead, we will have to go word by
+                 word, taking $()'s into account.  For each word we will
+                 substitute the stem, re-expand, chop it up, and, if
+                 check_lastslash != 0, add the directory part to each
+                 resulting prerequisite.  */
+              else
+                {
+                  int add_dir = 0;
+                  unsigned int len;
+                  struct dep **dptr;
+
+                  nptr = get_next_word (nptr, &len);
+                  if (nptr == 0)
+                    continue;
+
+                  /* See this is a transition to order-only prereqs.  */
+                  if (! order_only && len == 1 && nptr[0] == '|')
+                    {
+                      order_only = 1;
+                      nptr += len;
+                      continue;
+                    }
+
+                  /* If the dependency name has %, substitute the stem.  If we
+                     just replace % with the stem value then later, when we do
+                     the 2nd expansion, we will re-expand this stem value
+                     again.  This is not good if you have certain characters
+                     in your stem (like $).
+
+                     Instead, we will replace % with $* and allow the second
+                     expansion to take care of it for us.  This way (since $*
+                     is a simple variable) there won't be additional
+                     re-expansion of the stem.  */
+
+                  p = lindex (nptr, nptr + len, '%');
+                  if (p == 0)
+                    {
+                      memcpy (depname, nptr, len);
+                      depname[len] = '\0';
+                    }
+                  else
+                    {
+                      unsigned int i = p - nptr;
+                      memcpy (depname, nptr, i);
+                      memcpy (depname + i, "$*", 2);
+                      memcpy (depname + i + 2, p + 1, len - i - 1);
+                      depname[len + 2 - 1] = '\0';
+
+                      if (check_lastslash)
+                        add_dir = 1;
+                    }
+
+                  /* Set up for the next word.  */
+                  nptr += len;
+
+                  /* Initialize and set file variables if we haven't already
+                     done so. */
+                  if (!file_vars_initialized)
+                    {
+                      initialize_file_variables (file, 0);
+                      set_file_variables (file);
+                      file_vars_initialized = 1;
+                    }
+                  /* Update the stem value in $* for this rule.  */
+                  else if (!file_variables_set)
+                    {
+                      define_variable_for_file (
+                        "*", 1, file->stem, o_automatic, 0, file);
+                      file_variables_set = 1;
+                    }
+
+                  /* Perform the 2nd expansion.  */
+                  p = variable_expand_for_file (depname, file);
+                  dptr = &dl;
+
+                  /* Parse the results into a deps list.  */
+                  do
+                    {
+                      /* Parse the expanded string. */
+                      struct dep *dp = PARSE_FILE_SEQ (&p, struct dep,
+                                                       order_only ? MAP_NUL : MAP_PIPE,
+                                                       add_dir ? dir : NULL, PARSEFS_NONE);
+                      *dptr = dp;
+
+                      for (d = dp; d != NULL; d = d->next)
+                        {
+                          ++deps_found;
+                          if (order_only)
+                            d->ignore_mtime = 1;
+                          dptr = &d->next;
+                        }
+
+                      /* If we stopped due to an order-only token, note it.  */
+                      if (*p == '|')
+                        {
+                          order_only = 1;
+                          ++p;
+                        }
+                    }
+                  while (*p != '\0');
+                }
+
+              /* If there are more than max_pattern_deps prerequisites (due to
+                 2nd expansion), reset it and realloc the arrays.  */
+
+              if (deps_found > max_deps)
+                {
+                  unsigned int l = pat - deplist;
+                  /* This might have changed due to recursion.  */
+                  max_pattern_deps = MAX(max_pattern_deps, deps_found);
+                  max_deps = max_pattern_deps;
+                  deplist = xrealloc (deplist,
+                                      max_deps * sizeof (struct patdeps));
+                  pat = deplist + l;
+                }
+
+              /* Go through the nameseq and handle each as a prereq name.  */
+              for (d = dl; d != 0; d = d->next)
+                {
+                  struct dep *expl_d;
+                  int is_rule = d->name == dep_name (dep);
+
+                  if (file_impossible_p (d->name))
+                    {
+                      /* If this prereq has already been ruled "impossible",
+                         then the rule fails.  Don't bother trying it on the
+                         second pass either since we know that will fail.  */
+                      DBS (DB_IMPLICIT,
+                           (is_rule
+                            ? _("Rejecting impossible rule prerequisite '%s'.\n")
+                            : _("Rejecting impossible implicit prerequisite '%s'.\n"),
+                            d->name));
+                      tryrules[ri].rule = 0;
+
+                      failed = 1;
+                      break;
+                    }
+
+                  memset (pat, '\0', sizeof (struct patdeps));
+                  pat->ignore_mtime = d->ignore_mtime;
+
+                  DBS (DB_IMPLICIT,
+                       (is_rule
+                        ? _("Trying rule prerequisite '%s'.\n")
+                        : _("Trying implicit prerequisite '%s'.\n"), d->name));
+
+                  /* If this prereq is also explicitly mentioned for FILE,
+                     skip all tests below since it must be built no matter
+                     which implicit rule we choose. */
+
+                  for (expl_d = file->deps; expl_d != 0; expl_d = expl_d->next)
+                    if (streq (dep_name (expl_d), d->name))
+                      break;
+                  if (expl_d != 0)
+                    {
+                      (pat++)->name = d->name;
+                      continue;
+                    }
+
+                  /* The DEP->changed flag says that this dependency resides
+                     in a nonexistent directory.  So we normally can skip
+                     looking for the file.  However, if CHECK_LASTSLASH is
+                     set, then the dependency file we are actually looking for
+                     is in a different directory (the one gotten by prepending
+                     FILENAME's directory), so it might actually exist.  */
+
+                  /* @@ dep->changed check is disabled. */
+                  if (lookup_file (d->name) != 0
+                      /*|| ((!dep->changed || check_lastslash) && */
+                      || file_exists_p (d->name))
+                    {
+                      (pat++)->name = d->name;
+                      continue;
+                    }
+
+                  /* This code, given FILENAME = "lib/foo.o", dependency name
+                     "lib/foo.c", and VPATH=src, searches for
+                     "src/lib/foo.c".  */
+                  {
+                    const char *vname = vpath_search (d->name, 0, NULL, NULL);
+                    if (vname)
+                      {
+                        DBS (DB_IMPLICIT,
+                             (_("Found prerequisite '%s' as VPATH '%s'\n"),
+                              d->name, vname));
+                        (pat++)->name = d->name;
+                        continue;
+                      }
+                  }
+
+                  /* We could not find the file in any place we should look.
+                     Try to make this dependency as an intermediate file, but
+                     only on the second pass.  */
+
+                  if (intermed_ok)
+                    {
+                      DBS (DB_IMPLICIT,
+                           (_("Looking for a rule with intermediate file '%s'.\n"),
+                            d->name));
+
+                      if (int_file == 0)
+                        int_file = alloca (sizeof (struct file));
+                      memset (int_file, '\0', sizeof (struct file));
+                      int_file->name = d->name;
+
+                      if (pattern_search (int_file,
+                                          0,
+                                          depth + 1,
+                                          recursions + 1))
+                        {
+                          pat->pattern = int_file->name;
+                          int_file->name = d->name;
+                          pat->file = int_file;
+                          int_file = 0;
+                          (pat++)->name = d->name;
+                          continue;
+                        }
+
+                      /* If we have tried to find P as an intermediate file
+                         and failed, mark that name as impossible so we won't
+                         go through the search again later.  */
+                      if (int_file->variables)
+                        free_variable_set (int_file->variables);
+                      if (int_file->pat_variables)
+                        free_variable_set (int_file->pat_variables);
+                      file_impossible (d->name);
+                    }
+
+                  /* A dependency of this rule does not exist. Therefore, this
+                     rule fails.  */
+                  failed = 1;
+                  break;
+                }
+
+              /* Free the ns chain.  */
+              free_dep_chain (dl);
+
+              if (failed)
+                break;
+            }
+
+          /* Reset the stem in FILE. */
+
+          file->stem = 0;
+
+          /* This rule is no longer 'in use' for recursive searches.  */
+          rule->in_use = 0;
+
+          if (! failed)
+            /* This pattern rule does apply.  Stop looking for one.  */
+            break;
+
+          /* This pattern rule does not apply.  Keep looking.  */
+        }
+
+      /* If we found an applicable rule without intermediate files, don't try
+         with them.  */
+      if (ri < nrules)
+        break;
+
+      rule = 0;
+    }
+
+  /* RULE is nil if the loop went through the list but everything failed.  */
+  if (rule == 0)
+    goto done;
+
+  foundrule = ri;
+
+  /* If we are recursing, store the pattern that matched FILENAME in
+     FILE->name for use in upper levels.  */
+
+  if (recursions > 0)
+    /* Kludge-o-matic */
+    file->name = rule->targets[tryrules[foundrule].matches];
+
+  /* DEPLIST lists the prerequisites for the rule we found.  This includes the
+     intermediate files, if any.  Convert them into entries on the deps-chain
+     of FILE.  */
+
+  while (pat-- > deplist)
+    {
+      struct dep *dep;
+      const char *s;
+
+      if (pat->file != 0)
+        {
+          /* If we need to use an intermediate file, make sure it is entered
+             as a target, with the info that was found for it in the recursive
+             pattern_search call.  We know that the intermediate file did not
+             already exist as a target; therefore we can assume that the deps
+             and cmds of F below are null before we change them.  */
+
+          struct file *imf = pat->file;
+          struct file *f = lookup_file (imf->name);
+
+          /* We don't want to delete an intermediate file that happened
+             to be a prerequisite of some (other) target. Mark it as
+             precious.  */
+          if (f != 0)
+            f->precious = 1;
+          else
+            f = enter_file (imf->name);
+
+          f->deps = imf->deps;
+          f->cmds = imf->cmds;
+          f->stem = imf->stem;
+          f->variables = imf->variables;
+          f->pat_variables = imf->pat_variables;
+          f->pat_searched = imf->pat_searched;
+          f->also_make = imf->also_make;
+          f->is_target = 1;
+          f->intermediate = 1;
+          f->tried_implicit = 1;
+
+          imf = lookup_file (pat->pattern);
+          if (imf != 0 && imf->precious)
+            f->precious = 1;
+
+          for (dep = f->deps; dep != 0; dep = dep->next)
+            {
+              dep->file = enter_file (dep->name);
+              dep->name = 0;
+              dep->file->tried_implicit |= dep->changed;
+            }
+        }
+
+      dep = alloc_dep ();
+      dep->ignore_mtime = pat->ignore_mtime;
+      s = strcache_add (pat->name);
+      if (recursions)
+        dep->name = s;
+      else
+        {
+          dep->file = lookup_file (s);
+          if (dep->file == 0)
+            dep->file = enter_file (s);
+        }
+
+      if (pat->file == 0 && tryrules[foundrule].rule->terminal)
+        {
+          /* If the file actually existed (was not an intermediate file), and
+             the rule that found it was a terminal one, then we want to mark
+             the found file so that it will not have implicit rule search done
+             for it.  If we are not entering a 'struct file' for it now, we
+             indicate this with the 'changed' flag.  */
+          if (dep->file == 0)
+            dep->changed = 1;
+          else
+            dep->file->tried_implicit = 1;
+        }
+
+      dep->next = file->deps;
+      file->deps = dep;
+    }
+
+  if (!tryrules[foundrule].checked_lastslash)
+    {
+      /* Always allocate new storage, since STEM might be on the stack for an
+         intermediate file.  */
+      file->stem = strcache_add_len (stem, stemlen);
+      fullstemlen = stemlen;
+    }
+  else
+    {
+      int dirlen = (lastslash + 1) - filename;
+      char *sp;
+
+      /* We want to prepend the directory from
+         the original FILENAME onto the stem.  */
+      fullstemlen = dirlen + stemlen;
+      sp = alloca (fullstemlen + 1);
+      memcpy (sp, filename, dirlen);
+      memcpy (sp + dirlen, stem, stemlen);
+      sp[fullstemlen] = '\0';
+      file->stem = strcache_add (sp);
+    }
+
+  file->cmds = rule->cmds;
+  file->is_target = 1;
+
+  /* Set precious flag. */
+  {
+    struct file *f = lookup_file (rule->targets[tryrules[foundrule].matches]);
+    if (f && f->precious)
+      file->precious = 1;
+  }
+
+  /* If this rule builds other targets, too, put the others into FILE's
+     'also_make' member.  */
+
+  if (rule->num > 1)
+    for (ri = 0; ri < rule->num; ++ri)
+      if (ri != tryrules[foundrule].matches)
+        {
+          char *nm = alloca (rule->lens[ri] + fullstemlen + 1);
+          char *p = nm;
+          struct file *f;
+          struct dep *new = alloc_dep ();
+
+          /* GKM FIMXE: handle '|' here too */
+          memcpy (p, rule->targets[ri],
+                  rule->suffixes[ri] - rule->targets[ri] - 1);
+          p += rule->suffixes[ri] - rule->targets[ri] - 1;
+          memcpy (p, file->stem, fullstemlen);
+          p += fullstemlen;
+          memcpy (p, rule->suffixes[ri],
+                  rule->lens[ri] - (rule->suffixes[ri] - rule->targets[ri])+1);
+          new->name = strcache_add (nm);
+          new->file = enter_file (new->name);
+          new->next = file->also_make;
+
+          /* Set precious flag. */
+          f = lookup_file (rule->targets[ri]);
+          if (f && f->precious)
+            new->file->precious = 1;
+
+          /* Set the is_target flag so that this file is not treated as
+             intermediate by the pattern rule search algorithm and
+             file_exists_p cannot pick it up yet.  */
+          new->file->is_target = 1;
+
+          file->also_make = new;
+        }
+
+ done:
+  free (tryrules);
+  free (deplist);
+
+  return rule != 0;
+}
diff --git a/job.c b/job.c
new file mode 100644
index 0000000..2989249
--- /dev/null
+++ b/job.c
@@ -0,0 +1,3677 @@
+/* Job execution and handling for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "job.h"
+#include "debug.h"
+#include "filedef.h"
+#include "commands.h"
+#include "variable.h"
+#include "debug.h"
+
+#include <string.h>
+
+/* Default shell to use.  */
+#ifdef WINDOWS32
+#include <windows.h>
+
+const char *default_shell = "sh.exe";
+int no_default_sh_exe = 1;
+int batch_mode_shell = 1;
+HANDLE main_thread;
+
+#elif defined (_AMIGA)
+
+const char *default_shell = "";
+extern int MyExecute (char **);
+int batch_mode_shell = 0;
+
+#elif defined (__MSDOS__)
+
+/* The default shell is a pointer so we can change it if Makefile
+   says so.  It is without an explicit path so we get a chance
+   to search the $PATH for it (since MSDOS doesn't have standard
+   directories we could trust).  */
+const char *default_shell = "command.com";
+int batch_mode_shell = 0;
+
+#elif defined (__EMX__)
+
+const char *default_shell = "/bin/sh";
+int batch_mode_shell = 0;
+
+#elif defined (VMS)
+
+# include <descrip.h>
+const char *default_shell = "";
+int batch_mode_shell = 0;
+
+#elif defined (__riscos__)
+
+const char *default_shell = "";
+int batch_mode_shell = 0;
+
+#else
+
+const char *default_shell = "/bin/sh";
+int batch_mode_shell = 0;
+
+#endif
+
+#ifdef __MSDOS__
+# include <process.h>
+static int execute_by_shell;
+static int dos_pid = 123;
+int dos_status;
+int dos_command_running;
+#endif /* __MSDOS__ */
+
+#ifdef _AMIGA
+# include <proto/dos.h>
+static int amiga_pid = 123;
+static int amiga_status;
+static char amiga_bname[32];
+static int amiga_batch_file;
+#endif /* Amiga.  */
+
+#ifdef VMS
+# ifndef __GNUC__
+#   include <processes.h>
+# endif
+# include <starlet.h>
+# include <lib$routines.h>
+static void vmsWaitForChildren (int *);
+#endif
+
+#ifdef WINDOWS32
+# include <windows.h>
+# include <io.h>
+# include <process.h>
+# include "sub_proc.h"
+# include "w32err.h"
+# include "pathstuff.h"
+# define WAIT_NOHANG 1
+#endif /* WINDOWS32 */
+
+#ifdef __EMX__
+# include <process.h>
+#endif
+
+#if defined (HAVE_SYS_WAIT_H) || defined (HAVE_UNION_WAIT)
+# include <sys/wait.h>
+#endif
+
+#ifdef HAVE_WAITPID
+# define WAIT_NOHANG(status)    waitpid (-1, (status), WNOHANG)
+#else   /* Don't have waitpid.  */
+# ifdef HAVE_WAIT3
+#  ifndef wait3
+extern int wait3 ();
+#  endif
+#  define WAIT_NOHANG(status)   wait3 ((status), WNOHANG, (struct rusage *) 0)
+# endif /* Have wait3.  */
+#endif /* Have waitpid.  */
+
+#if !defined (wait) && !defined (POSIX)
+int wait ();
+#endif
+
+#ifndef HAVE_UNION_WAIT
+
+# define WAIT_T int
+
+# ifndef WTERMSIG
+#  define WTERMSIG(x) ((x) & 0x7f)
+# endif
+# ifndef WCOREDUMP
+#  define WCOREDUMP(x) ((x) & 0x80)
+# endif
+# ifndef WEXITSTATUS
+#  define WEXITSTATUS(x) (((x) >> 8) & 0xff)
+# endif
+# ifndef WIFSIGNALED
+#  define WIFSIGNALED(x) (WTERMSIG (x) != 0)
+# endif
+# ifndef WIFEXITED
+#  define WIFEXITED(x) (WTERMSIG (x) == 0)
+# endif
+
+#else   /* Have 'union wait'.  */
+
+# define WAIT_T union wait
+# ifndef WTERMSIG
+#  define WTERMSIG(x) ((x).w_termsig)
+# endif
+# ifndef WCOREDUMP
+#  define WCOREDUMP(x) ((x).w_coredump)
+# endif
+# ifndef WEXITSTATUS
+#  define WEXITSTATUS(x) ((x).w_retcode)
+# endif
+# ifndef WIFSIGNALED
+#  define WIFSIGNALED(x) (WTERMSIG(x) != 0)
+# endif
+# ifndef WIFEXITED
+#  define WIFEXITED(x) (WTERMSIG(x) == 0)
+# endif
+
+#endif  /* Don't have 'union wait'.  */
+
+#if !defined(HAVE_UNISTD_H) && !defined(WINDOWS32)
+int dup2 ();
+int execve ();
+void _exit ();
+# ifndef VMS
+int geteuid ();
+int getegid ();
+int setgid ();
+int getgid ();
+# endif
+#endif
+
+/* Different systems have different requirements for pid_t.
+   Plus we have to support gettext string translation... Argh.  */
+static const char *
+pid2str (pid_t pid)
+{
+  static char pidstring[100];
+#if defined(WINDOWS32) && (__GNUC__ > 3 || _MSC_VER > 1300)
+  /* %Id is only needed for 64-builds, which were not supported by
+      older versions of Windows compilers.  */
+  sprintf (pidstring, "%Id", pid);
+#else
+  sprintf (pidstring, "%lu", (unsigned long) pid);
+#endif
+  return pidstring;
+}
+
+int getloadavg (double loadavg[], int nelem);
+int start_remote_job (char **argv, char **envp, int stdin_fd, int *is_remote,
+                      int *id_ptr, int *used_stdin);
+int start_remote_job_p (int);
+int remote_status (int *exit_code_ptr, int *signal_ptr, int *coredump_ptr,
+                   int block);
+
+RETSIGTYPE child_handler (int);
+static void free_child (struct child *);
+static void start_job_command (struct child *child);
+static int load_too_high (void);
+static int job_next_command (struct child *);
+static int start_waiting_job (struct child *);
+
+/* Chain of all live (or recently deceased) children.  */
+
+struct child *children = 0;
+
+/* Number of children currently running.  */
+
+unsigned int job_slots_used = 0;
+
+/* Nonzero if the 'good' standard input is in use.  */
+
+static int good_stdin_used = 0;
+
+/* Chain of children waiting to run until the load average goes down.  */
+
+static struct child *waiting_jobs = 0;
+
+/* Non-zero if we use a *real* shell (always so on Unix).  */
+
+int unixy_shell = 1;
+
+/* Number of jobs started in the current second.  */
+
+unsigned long job_counter = 0;
+
+/* Number of jobserver tokens this instance is currently using.  */
+
+unsigned int jobserver_tokens = 0;
+
+
+#ifdef WINDOWS32
+/*
+ * The macro which references this function is defined in makeint.h.
+ */
+int
+w32_kill (pid_t pid, int sig)
+{
+  return ((process_kill ((HANDLE)pid, sig) == TRUE) ? 0 : -1);
+}
+
+/* This function creates a temporary file name with an extension specified
+ * by the unixy arg.
+ * Return an xmalloc'ed string of a newly created temp file and its
+ * file descriptor, or die.  */
+static char *
+create_batch_file (char const *base, int unixy, int *fd)
+{
+  const char *const ext = unixy ? "sh" : "bat";
+  const char *error_string = NULL;
+  char temp_path[MAXPATHLEN]; /* need to know its length */
+  unsigned path_size = GetTempPath (sizeof temp_path, temp_path);
+  int path_is_dot = 0;
+  /* The following variable is static so we won't try to reuse a name
+     that was generated a little while ago, because that file might
+     not be on disk yet, since we use FILE_ATTRIBUTE_TEMPORARY below,
+     which tells the OS it doesn't need to flush the cache to disk.
+     If the file is not yet on disk, we might think the name is
+     available, while it really isn't.  This happens in parallel
+     builds, where Make doesn't wait for one job to finish before it
+     launches the next one.  */
+  static unsigned uniq = 0;
+  static int second_loop = 0;
+  const unsigned sizemax = strlen (base) + strlen (ext) + 10;
+
+  if (path_size == 0)
+    {
+      path_size = GetCurrentDirectory (sizeof temp_path, temp_path);
+      path_is_dot = 1;
+    }
+
+  ++uniq;
+  if (uniq >= 0x10000 && !second_loop)
+    {
+      /* If we already had 64K batch files in this
+         process, make a second loop through the numbers,
+         looking for free slots, i.e. files that were
+         deleted in the meantime.  */
+      second_loop = 1;
+      uniq = 1;
+    }
+  while (path_size > 0 &&
+         path_size + sizemax < sizeof temp_path &&
+         !(uniq >= 0x10000 && second_loop))
+    {
+      unsigned size = sprintf (temp_path + path_size,
+                               "%s%s-%x.%s",
+                               temp_path[path_size - 1] == '\\' ? "" : "\\",
+                               base, uniq, ext);
+      HANDLE h = CreateFile (temp_path,  /* file name */
+                             GENERIC_READ | GENERIC_WRITE, /* desired access */
+                             0,                            /* no share mode */
+                             NULL,                         /* default security attributes */
+                             CREATE_NEW,                   /* creation disposition */
+                             FILE_ATTRIBUTE_NORMAL |       /* flags and attributes */
+                             FILE_ATTRIBUTE_TEMPORARY,     /* we'll delete it */
+                             NULL);                        /* no template file */
+
+      if (h == INVALID_HANDLE_VALUE)
+        {
+          const DWORD er = GetLastError ();
+
+          if (er == ERROR_FILE_EXISTS || er == ERROR_ALREADY_EXISTS)
+            {
+              ++uniq;
+              if (uniq == 0x10000 && !second_loop)
+                {
+                  second_loop = 1;
+                  uniq = 1;
+                }
+            }
+
+          /* the temporary path is not guaranteed to exist */
+          else if (path_is_dot == 0)
+            {
+              path_size = GetCurrentDirectory (sizeof temp_path, temp_path);
+              path_is_dot = 1;
+            }
+
+          else
+            {
+              error_string = map_windows32_error_to_string (er);
+              break;
+            }
+        }
+      else
+        {
+          const unsigned final_size = path_size + size + 1;
+          char *const path = xmalloc (final_size);
+          memcpy (path, temp_path, final_size);
+          *fd = _open_osfhandle ((intptr_t)h, 0);
+          if (unixy)
+            {
+              char *p;
+              int ch;
+              for (p = path; (ch = *p) != 0; ++p)
+                if (ch == '\\')
+                  *p = '/';
+            }
+          return path; /* good return */
+        }
+    }
+
+  *fd = -1;
+  if (error_string == NULL)
+    error_string = _("Cannot create a temporary file\n");
+  O (fatal, NILF, error_string);
+
+  /* not reached */
+  return NULL;
+}
+#endif /* WINDOWS32 */
+
+#ifdef __EMX__
+/* returns whether path is assumed to be a unix like shell. */
+int
+_is_unixy_shell (const char *path)
+{
+  /* list of non unix shells */
+  const char *known_os2shells[] = {
+    "cmd.exe",
+    "cmd",
+    "4os2.exe",
+    "4os2",
+    "4dos.exe",
+    "4dos",
+    "command.com",
+    "command",
+    NULL
+  };
+
+  /* find the rightmost '/' or '\\' */
+  const char *name = strrchr (path, '/');
+  const char *p = strrchr (path, '\\');
+  unsigned i;
+
+  if (name && p)    /* take the max */
+    name = (name > p) ? name : p;
+  else if (p)       /* name must be 0 */
+    name = p;
+  else if (!name)   /* name and p must be 0 */
+    name = path;
+
+  if (*name == '/' || *name == '\\') name++;
+
+  i = 0;
+  while (known_os2shells[i] != NULL)
+    {
+      if (strcasecmp (name, known_os2shells[i]) == 0)
+        return 0; /* not a unix shell */
+      i++;
+    }
+
+  /* in doubt assume a unix like shell */
+  return 1;
+}
+#endif /* __EMX__ */
+
+/* determines whether path looks to be a Bourne-like shell. */
+int
+is_bourne_compatible_shell (const char *path)
+{
+  /* List of known POSIX (or POSIX-ish) shells.  */
+  static const char *unix_shells[] = {
+    "sh",
+    "bash",
+    "ksh",
+    "rksh",
+    "zsh",
+    "ash",
+    "dash",
+    NULL
+  };
+  const char **s;
+
+  /* find the rightmost '/' or '\\' */
+  const char *name = strrchr (path, '/');
+  char *p = strrchr (path, '\\');
+
+  if (name && p)    /* take the max */
+    name = (name > p) ? name : p;
+  else if (p)       /* name must be 0 */
+    name = p;
+  else if (!name)   /* name and p must be 0 */
+    name = path;
+
+  if (*name == '/' || *name == '\\')
+    ++name;
+
+  /* this should be able to deal with extensions on Windows-like systems */
+  for (s = unix_shells; *s != NULL; ++s)
+    {
+#if defined(WINDOWS32) || defined(__MSDOS__)
+      unsigned int len = strlen (*s);
+      if ((strlen (name) >= len && STOP_SET (name[len], MAP_DOT|MAP_NUL))
+          && strncasecmp (name, *s, len) == 0)
+#else
+      if (strcmp (name, *s) == 0)
+#endif
+        return 1; /* a known unix-style shell */
+    }
+
+  /* if not on the list, assume it's not a Bourne-like shell */
+  return 0;
+}
+
+
+/* Write an error message describing the exit status given in
+   EXIT_CODE, EXIT_SIG, and COREDUMP, for the target TARGET_NAME.
+   Append "(ignored)" if IGNORED is nonzero.  */
+
+static void
+child_error (struct child *child,
+             int exit_code, int exit_sig, int coredump, int ignored)
+{
+  const char *pre = "*** ";
+  const char *post = "";
+  const char *dump = "";
+  const struct file *f = child->file;
+  const gmk_floc *flocp = &f->cmds->fileinfo;
+  const char *nm;
+  size_t l = strlen (f->name);
+
+  if (ignored && silent_flag)
+    return;
+
+  if (exit_sig && coredump)
+    dump = _(" (core dumped)");
+
+  if (ignored)
+    {
+      pre = "";
+      post = _(" (ignored)");
+    }
+
+  if (! flocp->filenm)
+    nm = _("<builtin>");
+  else
+    {
+      char *a = alloca (strlen (flocp->filenm) + 1 + 11 + 1);
+      sprintf (a, "%s:%lu", flocp->filenm, flocp->lineno);
+      nm = a;
+    }
+
+  OUTPUT_SET (&child->output);
+
+  message (0, l + strlen (nm),
+           _("%s: recipe for target '%s' failed"), nm, f->name);
+
+  l += strlen (pre) + strlen (post);
+
+#ifdef VMS
+  if ((exit_code & 1) != 0)
+    {
+      OUTPUT_UNSET ();
+      return;
+    }
+  /* Check for a Posix compatible VMS style exit code:
+     decode and print the Posix exit code */
+  if ((exit_code & 0x35a000) == 0x35a000)
+    error(NILF, l + INTSTR_LENGTH, _("%s[%s] Error %d%s"), pre, f->name,
+        ((exit_code & 0x7f8) >> 3), post);
+  else
+    error(NILF, l + INTSTR_LENGTH, _("%s[%s] Error 0x%x%s"), pre, f->name,
+        exit_code, post);
+#else
+  if (exit_sig == 0)
+    error (NILF, l + INTSTR_LENGTH,
+           _("%s[%s] Error %d%s"), pre, f->name, exit_code, post);
+  else
+    {
+      const char *s = strsignal (exit_sig);
+      error (NILF, l + strlen (s) + strlen (dump),
+             _("%s[%s] %s%s%s"), pre, f->name, s, dump, post);
+    }
+#endif /* VMS */
+
+  OUTPUT_UNSET ();
+}
+
+
+/* Handle a dead child.  This handler may or may not ever be installed.
+
+   If we're using the jobserver feature, we need it.  First, installing it
+   ensures the read will interrupt on SIGCHLD.  Second, we close the dup'd
+   read FD to ensure we don't enter another blocking read without reaping all
+   the dead children.  In this case we don't need the dead_children count.
+
+   If we don't have either waitpid or wait3, then make is unreliable, but we
+   use the dead_children count to reap children as best we can.  */
+
+static unsigned int dead_children = 0;
+
+RETSIGTYPE
+child_handler (int sig UNUSED)
+{
+  ++dead_children;
+
+  if (job_rfd >= 0)
+    {
+      close (job_rfd);
+      job_rfd = -1;
+    }
+
+#ifdef __EMX__
+  /* The signal handler must called only once! */
+  signal (SIGCHLD, SIG_DFL);
+#endif
+
+  /* This causes problems if the SIGCHLD interrupts a printf().
+  DB (DB_JOBS, (_("Got a SIGCHLD; %u unreaped children.\n"), dead_children));
+  */
+}
+
+extern int shell_function_pid, shell_function_completed;
+
+/* Reap all dead children, storing the returned status and the new command
+   state ('cs_finished') in the 'file' member of the 'struct child' for the
+   dead child, and removing the child from the chain.  In addition, if BLOCK
+   nonzero, we block in this function until we've reaped at least one
+   complete child, waiting for it to die if necessary.  If ERR is nonzero,
+   print an error message first.  */
+
+void
+reap_children (int block, int err)
+{
+#ifndef WINDOWS32
+  WAIT_T status;
+#endif
+  /* Initially, assume we have some.  */
+  int reap_more = 1;
+
+#ifdef WAIT_NOHANG
+# define REAP_MORE reap_more
+#else
+# define REAP_MORE dead_children
+#endif
+
+  /* As long as:
+
+       We have at least one child outstanding OR a shell function in progress,
+         AND
+       We're blocking for a complete child OR there are more children to reap
+
+     we'll keep reaping children.  */
+
+  while ((children != 0 || shell_function_pid != 0)
+         && (block || REAP_MORE))
+    {
+      int remote = 0;
+      pid_t pid;
+      int exit_code, exit_sig, coredump;
+      struct child *lastc, *c;
+      int child_failed;
+      int any_remote, any_local;
+      int dontcare;
+
+      if (err && block)
+        {
+          static int printed = 0;
+
+          /* We might block for a while, so let the user know why.
+             Only print this message once no matter how many jobs are left.  */
+          fflush (stdout);
+          if (!printed)
+            O (error, NILF, _("*** Waiting for unfinished jobs...."));
+          printed = 1;
+        }
+
+      /* We have one less dead child to reap.  As noted in
+         child_handler() above, this count is completely unimportant for
+         all modern, POSIX-y systems that support wait3() or waitpid().
+         The rest of this comment below applies only to early, broken
+         pre-POSIX systems.  We keep the count only because... it's there...
+
+         The test and decrement are not atomic; if it is compiled into:
+                register = dead_children - 1;
+                dead_children = register;
+         a SIGCHLD could come between the two instructions.
+         child_handler increments dead_children.
+         The second instruction here would lose that increment.  But the
+         only effect of dead_children being wrong is that we might wait
+         longer than necessary to reap a child, and lose some parallelism;
+         and we might print the "Waiting for unfinished jobs" message above
+         when not necessary.  */
+
+      if (dead_children > 0)
+        --dead_children;
+
+      any_remote = 0;
+      any_local = shell_function_pid != 0;
+      for (c = children; c != 0; c = c->next)
+        {
+          any_remote |= c->remote;
+          any_local |= ! c->remote;
+          DB (DB_JOBS, (_("Live child %p (%s) PID %s %s\n"),
+                        c, c->file->name, pid2str (c->pid),
+                        c->remote ? _(" (remote)") : ""));
+#ifdef VMS
+          break;
+#endif
+        }
+
+      /* First, check for remote children.  */
+      if (any_remote)
+        pid = remote_status (&exit_code, &exit_sig, &coredump, 0);
+      else
+        pid = 0;
+
+      if (pid > 0)
+        /* We got a remote child.  */
+        remote = 1;
+      else if (pid < 0)
+        {
+          /* A remote status command failed miserably.  Punt.  */
+        remote_status_lose:
+          pfatal_with_name ("remote_status");
+        }
+      else
+        {
+          /* No remote children.  Check for local children.  */
+#if !defined(__MSDOS__) && !defined(_AMIGA) && !defined(WINDOWS32)
+          if (any_local)
+            {
+#ifdef VMS
+              vmsWaitForChildren (&status);
+              pid = c->pid;
+#else
+#ifdef WAIT_NOHANG
+              if (!block)
+                pid = WAIT_NOHANG (&status);
+              else
+#endif
+                EINTRLOOP(pid, wait (&status));
+#endif /* !VMS */
+            }
+          else
+            pid = 0;
+
+          if (pid < 0)
+            {
+              /* The wait*() failed miserably.  Punt.  */
+              pfatal_with_name ("wait");
+            }
+          else if (pid > 0)
+            {
+              /* We got a child exit; chop the status word up.  */
+              exit_code = WEXITSTATUS (status);
+              exit_sig = WIFSIGNALED (status) ? WTERMSIG (status) : 0;
+              coredump = WCOREDUMP (status);
+
+              /* If we have started jobs in this second, remove one.  */
+              if (job_counter)
+                --job_counter;
+            }
+          else
+            {
+              /* No local children are dead.  */
+              reap_more = 0;
+
+              if (!block || !any_remote)
+                break;
+
+              /* Now try a blocking wait for a remote child.  */
+              pid = remote_status (&exit_code, &exit_sig, &coredump, 1);
+              if (pid < 0)
+                goto remote_status_lose;
+              else if (pid == 0)
+                /* No remote children either.  Finally give up.  */
+                break;
+
+              /* We got a remote child.  */
+              remote = 1;
+            }
+#endif /* !__MSDOS__, !Amiga, !WINDOWS32.  */
+
+#ifdef __MSDOS__
+          /* Life is very different on MSDOS.  */
+          pid = dos_pid - 1;
+          status = dos_status;
+          exit_code = WEXITSTATUS (status);
+          if (exit_code == 0xff)
+            exit_code = -1;
+          exit_sig = WIFSIGNALED (status) ? WTERMSIG (status) : 0;
+          coredump = 0;
+#endif /* __MSDOS__ */
+#ifdef _AMIGA
+          /* Same on Amiga */
+          pid = amiga_pid - 1;
+          status = amiga_status;
+          exit_code = amiga_status;
+          exit_sig = 0;
+          coredump = 0;
+#endif /* _AMIGA */
+#ifdef WINDOWS32
+          {
+            HANDLE hPID;
+            HANDLE hcTID, hcPID;
+            DWORD dwWaitStatus = 0;
+            exit_code = 0;
+            exit_sig = 0;
+            coredump = 0;
+
+            /* Record the thread ID of the main process, so that we
+               could suspend it in the signal handler.  */
+            if (!main_thread)
+              {
+                hcTID = GetCurrentThread ();
+                hcPID = GetCurrentProcess ();
+                if (!DuplicateHandle (hcPID, hcTID, hcPID, &main_thread, 0,
+                                      FALSE, DUPLICATE_SAME_ACCESS))
+                  {
+                    DWORD e = GetLastError ();
+                    fprintf (stderr,
+                             "Determine main thread ID (Error %ld: %s)\n",
+                             e, map_windows32_error_to_string (e));
+                  }
+                else
+                  DB (DB_VERBOSE, ("Main thread handle = %p\n", main_thread));
+              }
+
+            /* wait for anything to finish */
+            hPID = process_wait_for_any (block, &dwWaitStatus);
+            if (hPID)
+              {
+                /* was an error found on this process? */
+                int werr = process_last_err (hPID);
+
+                /* get exit data */
+                exit_code = process_exit_code (hPID);
+
+                if (werr)
+                  fprintf (stderr, "make (e=%d): %s", exit_code,
+                           map_windows32_error_to_string (exit_code));
+
+                /* signal */
+                exit_sig = process_signal (hPID);
+
+                /* cleanup process */
+                process_cleanup (hPID);
+
+                coredump = 0;
+              }
+            else if (dwWaitStatus == WAIT_FAILED)
+              {
+                /* The WaitForMultipleObjects() failed miserably.  Punt.  */
+                pfatal_with_name ("WaitForMultipleObjects");
+              }
+            else if (dwWaitStatus == WAIT_TIMEOUT)
+              {
+                /* No child processes are finished.  Give up waiting. */
+                reap_more = 0;
+                break;
+              }
+
+            pid = (pid_t) hPID;
+          }
+#endif /* WINDOWS32 */
+        }
+
+      /* Check if this is the child of the 'shell' function.  */
+      if (!remote && pid == shell_function_pid)
+        {
+          /* It is.  Leave an indicator for the 'shell' function.  */
+          if (exit_sig == 0 && exit_code == 127)
+            shell_function_completed = -1;
+          else
+            shell_function_completed = 1;
+          break;
+        }
+
+      child_failed = exit_sig != 0 || exit_code != 0;
+
+      /* Search for a child matching the deceased one.  */
+      lastc = 0;
+      for (c = children; c != 0; lastc = c, c = c->next)
+        if (c->pid == pid && c->remote == remote)
+          break;
+
+      if (c == 0)
+        /* An unknown child died.
+           Ignore it; it was inherited from our invoker.  */
+        continue;
+
+      DB (DB_JOBS, (child_failed
+                    ? _("Reaping losing child %p PID %s %s\n")
+                    : _("Reaping winning child %p PID %s %s\n"),
+                    c, pid2str (c->pid), c->remote ? _(" (remote)") : ""));
+
+      if (c->sh_batch_file)
+        {
+          int rm_status;
+
+          DB (DB_JOBS, (_("Cleaning up temp batch file %s\n"),
+                        c->sh_batch_file));
+
+          errno = 0;
+          rm_status = remove (c->sh_batch_file);
+          if (rm_status)
+            DB (DB_JOBS, (_("Cleaning up temp batch file %s failed (%d)\n"),
+                          c->sh_batch_file, errno));
+
+          /* all done with memory */
+          free (c->sh_batch_file);
+          c->sh_batch_file = NULL;
+        }
+
+      /* If this child had the good stdin, say it is now free.  */
+      if (c->good_stdin)
+        good_stdin_used = 0;
+
+      dontcare = c->dontcare;
+
+      if (child_failed && !c->noerror && !ignore_errors_flag)
+        {
+          /* The commands failed.  Write an error message,
+             delete non-precious targets, and abort.  */
+          static int delete_on_error = -1;
+
+          if (!dontcare)
+            child_error (c, exit_code, exit_sig, coredump, 0);
+
+          c->file->update_status = us_failed;
+          if (delete_on_error == -1)
+            {
+              struct file *f = lookup_file (".DELETE_ON_ERROR");
+              delete_on_error = f != 0 && f->is_target;
+            }
+          if (exit_sig != 0 || delete_on_error)
+            delete_child_targets (c);
+        }
+      else
+        {
+          if (child_failed)
+            {
+              /* The commands failed, but we don't care.  */
+              child_error (c, exit_code, exit_sig, coredump, 1);
+              child_failed = 0;
+            }
+
+          /* If there are more commands to run, try to start them.  */
+          if (job_next_command (c))
+            {
+              if (handling_fatal_signal)
+                {
+                  /* Never start new commands while we are dying.
+                     Since there are more commands that wanted to be run,
+                     the target was not completely remade.  So we treat
+                     this as if a command had failed.  */
+                  c->file->update_status = us_failed;
+                }
+              else
+                {
+#ifndef NO_OUTPUT_SYNC
+                  /* If we're sync'ing per line, write the previous line's
+                     output before starting the next one.  */
+                  if (output_sync == OUTPUT_SYNC_LINE)
+                    output_dump (&c->output);
+#endif
+                  /* Check again whether to start remotely.
+                     Whether or not we want to changes over time.
+                     Also, start_remote_job may need state set up
+                     by start_remote_job_p.  */
+                  c->remote = start_remote_job_p (0);
+                  start_job_command (c);
+                  /* Fatal signals are left blocked in case we were
+                     about to put that child on the chain.  But it is
+                     already there, so it is safe for a fatal signal to
+                     arrive now; it will clean up this child's targets.  */
+                  unblock_sigs ();
+                  if (c->file->command_state == cs_running)
+                    /* We successfully started the new command.
+                       Loop to reap more children.  */
+                    continue;
+                }
+
+              if (c->file->update_status != us_success)
+                /* We failed to start the commands.  */
+                delete_child_targets (c);
+            }
+          else
+            /* There are no more commands.  We got through them all
+               without an unignored error.  Now the target has been
+               successfully updated.  */
+            c->file->update_status = us_success;
+        }
+
+      /* When we get here, all the commands for c->file are finished.  */
+
+#ifndef NO_OUTPUT_SYNC
+      /* Synchronize any remaining parallel output.  */
+      output_dump (&c->output);
+#endif
+
+      /* At this point c->file->update_status is success or failed.  But
+         c->file->command_state is still cs_running if all the commands
+         ran; notice_finish_file looks for cs_running to tell it that
+         it's interesting to check the file's modtime again now.  */
+
+      if (! handling_fatal_signal)
+        /* Notice if the target of the commands has been changed.
+           This also propagates its values for command_state and
+           update_status to its also_make files.  */
+        notice_finished_file (c->file);
+
+      DB (DB_JOBS, (_("Removing child %p PID %s%s from chain.\n"),
+                    c, pid2str (c->pid), c->remote ? _(" (remote)") : ""));
+
+      /* Block fatal signals while frobnicating the list, so that
+         children and job_slots_used are always consistent.  Otherwise
+         a fatal signal arriving after the child is off the chain and
+         before job_slots_used is decremented would believe a child was
+         live and call reap_children again.  */
+      block_sigs ();
+
+      /* There is now another slot open.  */
+      if (job_slots_used > 0)
+        --job_slots_used;
+
+      /* Remove the child from the chain and free it.  */
+      if (lastc == 0)
+        children = c->next;
+      else
+        lastc->next = c->next;
+
+      free_child (c);
+
+      unblock_sigs ();
+
+      /* If the job failed, and the -k flag was not given, die,
+         unless we are already in the process of dying.  */
+      if (!err && child_failed && !dontcare && !keep_going_flag &&
+          /* fatal_error_signal will die with the right signal.  */
+          !handling_fatal_signal)
+        die (MAKE_FAILURE);
+
+      /* Only block for one child.  */
+      block = 0;
+    }
+
+  return;
+}
+
+/* Free the storage allocated for CHILD.  */
+
+static void
+free_child (struct child *child)
+{
+  output_close (&child->output);
+
+  if (!jobserver_tokens)
+    ONS (fatal, NILF, "INTERNAL: Freeing child %p (%s) but no tokens left!\n",
+         child, child->file->name);
+
+  /* If we're using the jobserver and this child is not the only outstanding
+     job, put a token back into the pipe for it.  */
+
+#ifdef WINDOWS32
+  if (has_jobserver_semaphore () && jobserver_tokens > 1)
+    {
+      if (! release_jobserver_semaphore ())
+        {
+          DWORD err = GetLastError ();
+          const char *estr = map_windows32_error_to_string (err);
+          ONS (fatal, NILF,
+               _("release jobserver semaphore: (Error %ld: %s)"), err, estr);
+        }
+
+      DB (DB_JOBS, (_("Released token for child %p (%s).\n"), child, child->file->name));
+    }
+#else
+  if (job_fds[1] >= 0 && jobserver_tokens > 1)
+    {
+      char token = '+';
+      int r;
+
+      /* Write a job token back to the pipe.  */
+
+      EINTRLOOP (r, write (job_fds[1], &token, 1));
+      if (r != 1)
+        pfatal_with_name (_("write jobserver"));
+
+      DB (DB_JOBS, (_("Released token for child %p (%s).\n"),
+                    child, child->file->name));
+    }
+#endif
+
+  --jobserver_tokens;
+
+  if (handling_fatal_signal) /* Don't bother free'ing if about to die.  */
+    return;
+
+  if (child->command_lines != 0)
+    {
+      register unsigned int i;
+      for (i = 0; i < child->file->cmds->ncommand_lines; ++i)
+        free (child->command_lines[i]);
+      free (child->command_lines);
+    }
+
+  if (child->environment != 0)
+    {
+      register char **ep = child->environment;
+      while (*ep != 0)
+        free (*ep++);
+      free (child->environment);
+    }
+
+  free (child);
+}
+
+#ifdef POSIX
+extern sigset_t fatal_signal_set;
+#endif
+
+void
+block_sigs (void)
+{
+#ifdef POSIX
+  (void) sigprocmask (SIG_BLOCK, &fatal_signal_set, (sigset_t *) 0);
+#else
+# ifdef HAVE_SIGSETMASK
+  (void) sigblock (fatal_signal_mask);
+# endif
+#endif
+}
+
+#ifdef POSIX
+void
+unblock_sigs (void)
+{
+  sigset_t empty;
+  sigemptyset (&empty);
+  sigprocmask (SIG_SETMASK, &empty, (sigset_t *) 0);
+}
+#endif
+
+#if defined(MAKE_JOBSERVER) && !defined(WINDOWS32)
+RETSIGTYPE
+job_noop (int sig UNUSED)
+{
+}
+/* Set the child handler action flags to FLAGS.  */
+static void
+set_child_handler_action_flags (int set_handler, int set_alarm)
+{
+  struct sigaction sa;
+
+#ifdef __EMX__
+  /* The child handler must be turned off here.  */
+  signal (SIGCHLD, SIG_DFL);
+#endif
+
+  memset (&sa, '\0', sizeof sa);
+  sa.sa_handler = child_handler;
+  sa.sa_flags = set_handler ? 0 : SA_RESTART;
+#if defined SIGCHLD
+  sigaction (SIGCHLD, &sa, NULL);
+#endif
+#if defined SIGCLD && SIGCLD != SIGCHLD
+  sigaction (SIGCLD, &sa, NULL);
+#endif
+#if defined SIGALRM
+  if (set_alarm)
+    {
+      /* If we're about to enter the read(), set an alarm to wake up in a
+         second so we can check if the load has dropped and we can start more
+         work.  On the way out, turn off the alarm and set SIG_DFL.  */
+      if (set_handler)
+        {
+          sa.sa_handler = job_noop;
+          sa.sa_flags = 0;
+          sigaction (SIGALRM, &sa, NULL);
+          alarm (1);
+        }
+      else
+        {
+          alarm (0);
+          sa.sa_handler = SIG_DFL;
+          sa.sa_flags = 0;
+          sigaction (SIGALRM, &sa, NULL);
+        }
+    }
+#endif
+}
+#endif
+
+
+/* Start a job to run the commands specified in CHILD.
+   CHILD is updated to reflect the commands and ID of the child process.
+
+   NOTE: On return fatal signals are blocked!  The caller is responsible
+   for calling 'unblock_sigs', once the new child is safely on the chain so
+   it can be cleaned up in the event of a fatal signal.  */
+
+static void
+start_job_command (struct child *child)
+{
+#if !defined(_AMIGA) && !defined(WINDOWS32)
+  static int bad_stdin = -1;
+#endif
+  int flags;
+  char *p;
+#ifdef VMS
+  char *argv;
+#else
+  char **argv;
+  int outfd = FD_STDOUT;
+  int errfd = FD_STDERR;
+#endif
+
+  /* If we have a completely empty commandset, stop now.  */
+  if (!child->command_ptr)
+    goto next_command;
+
+  /* Combine the flags parsed for the line itself with
+     the flags specified globally for this target.  */
+  flags = (child->file->command_flags
+           | child->file->cmds->lines_flags[child->command_line - 1]);
+
+  p = child->command_ptr;
+  child->noerror = ((flags & COMMANDS_NOERROR) != 0);
+
+  while (*p != '\0')
+    {
+      if (*p == '@')
+        flags |= COMMANDS_SILENT;
+      else if (*p == '+')
+        flags |= COMMANDS_RECURSE;
+      else if (*p == '-')
+        child->noerror = 1;
+      else if (!isblank ((unsigned char)*p))
+        break;
+      ++p;
+    }
+
+  /* Update the file's command flags with any new ones we found.  We only
+     keep the COMMANDS_RECURSE setting.  Even this isn't 100% correct; we are
+     now marking more commands recursive than should be in the case of
+     multiline define/endef scripts where only one line is marked "+".  In
+     order to really fix this, we'll have to keep a lines_flags for every
+     actual line, after expansion.  */
+  child->file->cmds->lines_flags[child->command_line - 1]
+    |= flags & COMMANDS_RECURSE;
+
+  /* POSIX requires that a recipe prefix after a backslash-newline should
+     be ignored.  Remove it now so the output is correct.  */
+  {
+    char prefix = child->file->cmds->recipe_prefix;
+    char *p1, *p2;
+    p1 = p2 = p;
+    while (*p1 != '\0')
+      {
+        *(p2++) = *p1;
+        if (p1[0] == '\n' && p1[1] == prefix)
+          ++p1;
+        ++p1;
+      }
+    *p2 = *p1;
+  }
+
+  /* Figure out an argument list from this command line.  */
+  {
+    char *end = 0;
+#ifdef VMS
+    argv = p;
+    /* Although construct_command_argv contains some code for VMS, it was/is
+       not called/used.  Please note, for VMS argv is a string (not an array
+       of strings) which contains the complete command line, which for
+       multi-line variables still includes the newlines.  So detect newlines
+       and set 'end' (which is used for child->command_ptr) instead of
+       (re-)writing construct_command_argv */
+    if (!one_shell)
+      {
+        char *s = p;
+        int instring = 0;
+        while (*s)
+          {
+            if (*s == '"')
+              instring = !instring;
+            else if (*s == '\\' && !instring && *(s+1) != 0)
+              s++;
+            else if (*s == '\n' && !instring)
+              {
+                end = s;
+                break;
+              }
+            ++s;
+          }
+      }
+#else
+    argv = construct_command_argv (p, &end, child->file,
+                                   child->file->cmds->lines_flags[child->command_line - 1],
+                                   &child->sh_batch_file);
+#endif
+    if (end == NULL)
+      child->command_ptr = NULL;
+    else
+      {
+        *end++ = '\0';
+        child->command_ptr = end;
+      }
+  }
+
+  /* If -q was given, say that updating 'failed' if there was any text on the
+     command line, or 'succeeded' otherwise.  The exit status of 1 tells the
+     user that -q is saying 'something to do'; the exit status for a random
+     error is 2.  */
+  if (argv != 0 && question_flag && !(flags & COMMANDS_RECURSE))
+    {
+#ifndef VMS
+      free (argv[0]);
+      free (argv);
+#endif
+      child->file->update_status = us_question;
+      notice_finished_file (child->file);
+      return;
+    }
+
+  if (touch_flag && !(flags & COMMANDS_RECURSE))
+    {
+      /* Go on to the next command.  It might be the recursive one.
+         We construct ARGV only to find the end of the command line.  */
+#ifndef VMS
+      if (argv)
+        {
+          free (argv[0]);
+          free (argv);
+        }
+#endif
+      argv = 0;
+    }
+
+  if (argv == 0)
+    {
+    next_command:
+#ifdef __MSDOS__
+      execute_by_shell = 0;   /* in case construct_command_argv sets it */
+#endif
+      /* This line has no commands.  Go to the next.  */
+      if (job_next_command (child))
+        start_job_command (child);
+      else
+        {
+          /* No more commands.  Make sure we're "running"; we might not be if
+             (e.g.) all commands were skipped due to -n.  */
+          set_command_state (child->file, cs_running);
+          child->file->update_status = us_success;
+          notice_finished_file (child->file);
+        }
+
+      OUTPUT_UNSET();
+      return;
+    }
+
+  /* Are we going to synchronize this command's output?  Do so if either we're
+     in SYNC_RECURSE mode or this command is not recursive.  We'll also check
+     output_sync separately below in case it changes due to error.  */
+  child->output.syncout = output_sync && (output_sync == OUTPUT_SYNC_RECURSE
+                                          || !(flags & COMMANDS_RECURSE));
+
+  OUTPUT_SET (&child->output);
+
+#ifndef NO_OUTPUT_SYNC
+  if (! child->output.syncout)
+    /* We don't want to sync this command: to avoid misordered
+       output ensure any already-synced content is written.  */
+    output_dump (&child->output);
+#endif
+
+  /* Print the command if appropriate.  */
+  if (just_print_flag || trace_flag
+      || (!(flags & COMMANDS_SILENT) && !silent_flag))
+    OS (message, 0, "%s", p);
+
+  /* Tell update_goal_chain that a command has been started on behalf of
+     this target.  It is important that this happens here and not in
+     reap_children (where we used to do it), because reap_children might be
+     reaping children from a different target.  We want this increment to
+     guaranteedly indicate that a command was started for the dependency
+     chain (i.e., update_file recursion chain) we are processing.  */
+
+  ++commands_started;
+
+  /* Optimize an empty command.  People use this for timestamp rules,
+     so avoid forking a useless shell.  Do this after we increment
+     commands_started so make still treats this special case as if it
+     performed some action (makes a difference as to what messages are
+     printed, etc.  */
+
+#if !defined(VMS) && !defined(_AMIGA)
+  if (
+#if defined __MSDOS__ || defined (__EMX__)
+      unixy_shell       /* the test is complicated and we already did it */
+#else
+      (argv[0] && is_bourne_compatible_shell (argv[0]))
+#endif
+      && (argv[1] && argv[1][0] == '-'
+        &&
+            ((argv[1][1] == 'c' && argv[1][2] == '\0')
+          ||
+             (argv[1][1] == 'e' && argv[1][2] == 'c' && argv[1][3] == '\0')))
+      && (argv[2] && argv[2][0] == ':' && argv[2][1] == '\0')
+      && argv[3] == NULL)
+    {
+      free (argv[0]);
+      free (argv);
+      goto next_command;
+    }
+#endif  /* !VMS && !_AMIGA */
+
+  /* If -n was given, recurse to get the next line in the sequence.  */
+
+  if (just_print_flag && !(flags & COMMANDS_RECURSE))
+    {
+#ifndef VMS
+      free (argv[0]);
+      free (argv);
+#endif
+      goto next_command;
+    }
+
+  /* We're sure we're going to invoke a command: set up the output.  */
+  output_start ();
+
+  /* Flush the output streams so they won't have things written twice.  */
+
+  fflush (stdout);
+  fflush (stderr);
+
+#ifndef VMS
+#if !defined(WINDOWS32) && !defined(_AMIGA) && !defined(__MSDOS__)
+
+  /* Set up a bad standard input that reads from a broken pipe.  */
+
+  if (bad_stdin == -1)
+    {
+      /* Make a file descriptor that is the read end of a broken pipe.
+         This will be used for some children's standard inputs.  */
+      int pd[2];
+      if (pipe (pd) == 0)
+        {
+          /* Close the write side.  */
+          (void) close (pd[1]);
+          /* Save the read side.  */
+          bad_stdin = pd[0];
+
+          /* Set the descriptor to close on exec, so it does not litter any
+             child's descriptor table.  When it is dup2'd onto descriptor 0,
+             that descriptor will not close on exec.  */
+          CLOSE_ON_EXEC (bad_stdin);
+        }
+    }
+
+#endif /* !WINDOWS32 && !_AMIGA && !__MSDOS__ */
+
+  /* Decide whether to give this child the 'good' standard input
+     (one that points to the terminal or whatever), or the 'bad' one
+     that points to the read side of a broken pipe.  */
+
+  child->good_stdin = !good_stdin_used;
+  if (child->good_stdin)
+    good_stdin_used = 1;
+
+#endif /* !VMS */
+
+  child->deleted = 0;
+
+#ifndef _AMIGA
+  /* Set up the environment for the child.  */
+  if (child->environment == 0)
+    child->environment = target_environment (child->file);
+#endif
+
+#if !defined(__MSDOS__) && !defined(_AMIGA) && !defined(WINDOWS32)
+
+#ifndef VMS
+  /* start_waiting_job has set CHILD->remote if we can start a remote job.  */
+  if (child->remote)
+    {
+      int is_remote, id, used_stdin;
+      if (start_remote_job (argv, child->environment,
+                            child->good_stdin ? 0 : bad_stdin,
+                            &is_remote, &id, &used_stdin))
+        /* Don't give up; remote execution may fail for various reasons.  If
+           so, simply run the job locally.  */
+        goto run_local;
+      else
+        {
+          if (child->good_stdin && !used_stdin)
+            {
+              child->good_stdin = 0;
+              good_stdin_used = 0;
+            }
+          child->remote = is_remote;
+          child->pid = id;
+        }
+    }
+  else
+#endif /* !VMS */
+    {
+      /* Fork the child process.  */
+
+      char **parent_environ;
+
+    run_local:
+      block_sigs ();
+
+      child->remote = 0;
+
+#ifdef VMS
+      if (!child_execute_job (argv, child))
+        {
+          /* Fork failed!  */
+          perror_with_name ("fork", "");
+          goto error;
+        }
+
+#else
+
+      parent_environ = environ;
+
+#ifndef NO_OUTPUT_SYNC
+      /* Divert child output if output_sync in use.  */
+      if (child->output.syncout)
+        {
+          if (child->output.out >= 0)
+            outfd = child->output.out;
+          if (child->output.err >= 0)
+            errfd = child->output.err;
+        }
+#endif
+# ifdef __EMX__
+      /* If we aren't running a recursive command and we have a jobserver
+         pipe, close it before exec'ing.  */
+      if (!(flags & COMMANDS_RECURSE) && job_fds[0] >= 0)
+        {
+          CLOSE_ON_EXEC (job_fds[0]);
+          CLOSE_ON_EXEC (job_fds[1]);
+        }
+      if (job_rfd >= 0)
+        CLOSE_ON_EXEC (job_rfd);
+
+      /* Never use fork()/exec() here! Use spawn() instead in exec_command() */
+      child->pid = child_execute_job (child->good_stdin ? FD_STDIN : bad_stdin,
+                                      outfd, errfd,
+                                      argv, child->environment);
+      if (child->pid < 0)
+        {
+          /* spawn failed!  */
+          unblock_sigs ();
+          perror_with_name ("spawn", "");
+          goto error;
+        }
+
+      /* undo CLOSE_ON_EXEC() after the child process has been started */
+      if (!(flags & COMMANDS_RECURSE) && job_fds[0] >= 0)
+        {
+          fcntl (job_fds[0], F_SETFD, 0);
+          fcntl (job_fds[1], F_SETFD, 0);
+        }
+      if (job_rfd >= 0)
+        fcntl (job_rfd, F_SETFD, 0);
+
+#else  /* !__EMX__ */
+
+      child->pid = fork ();
+      environ = parent_environ; /* Restore value child may have clobbered.  */
+      if (child->pid == 0)
+        {
+          /* We are the child side.  */
+          unblock_sigs ();
+
+          /* If we aren't running a recursive command and we have a jobserver
+             pipe, close it before exec'ing.  */
+          if (!(flags & COMMANDS_RECURSE) && job_fds[0] >= 0)
+            {
+              close (job_fds[0]);
+              close (job_fds[1]);
+            }
+          if (job_rfd >= 0)
+            close (job_rfd);
+
+#ifdef SET_STACK_SIZE
+          /* Reset limits, if necessary.  */
+          if (stack_limit.rlim_cur)
+            setrlimit (RLIMIT_STACK, &stack_limit);
+#endif
+          child_execute_job (child->good_stdin ? FD_STDIN : bad_stdin,
+                             outfd, errfd, argv, child->environment);
+        }
+      else if (child->pid < 0)
+        {
+          /* Fork failed!  */
+          unblock_sigs ();
+          perror_with_name ("fork", "");
+          goto error;
+        }
+# endif  /* !__EMX__ */
+#endif /* !VMS */
+    }
+
+#else   /* __MSDOS__ or Amiga or WINDOWS32 */
+#ifdef __MSDOS__
+  {
+    int proc_return;
+
+    block_sigs ();
+    dos_status = 0;
+
+    /* We call 'system' to do the job of the SHELL, since stock DOS
+       shell is too dumb.  Our 'system' knows how to handle long
+       command lines even if pipes/redirection is needed; it will only
+       call COMMAND.COM when its internal commands are used.  */
+    if (execute_by_shell)
+      {
+        char *cmdline = argv[0];
+        /* We don't have a way to pass environment to 'system',
+           so we need to save and restore ours, sigh...  */
+        char **parent_environ = environ;
+
+        environ = child->environment;
+
+        /* If we have a *real* shell, tell 'system' to call
+           it to do everything for us.  */
+        if (unixy_shell)
+          {
+            /* A *real* shell on MSDOS may not support long
+               command lines the DJGPP way, so we must use 'system'.  */
+            cmdline = argv[2];  /* get past "shell -c" */
+          }
+
+        dos_command_running = 1;
+        proc_return = system (cmdline);
+        environ = parent_environ;
+        execute_by_shell = 0;   /* for the next time */
+      }
+    else
+      {
+        dos_command_running = 1;
+        proc_return = spawnvpe (P_WAIT, argv[0], argv, child->environment);
+      }
+
+    /* Need to unblock signals before turning off
+       dos_command_running, so that child's signals
+       will be treated as such (see fatal_error_signal).  */
+    unblock_sigs ();
+    dos_command_running = 0;
+
+    /* If the child got a signal, dos_status has its
+       high 8 bits set, so be careful not to alter them.  */
+    if (proc_return == -1)
+      dos_status |= 0xff;
+    else
+      dos_status |= (proc_return & 0xff);
+    ++dead_children;
+    child->pid = dos_pid++;
+  }
+#endif /* __MSDOS__ */
+#ifdef _AMIGA
+  amiga_status = MyExecute (argv);
+
+  ++dead_children;
+  child->pid = amiga_pid++;
+  if (amiga_batch_file)
+  {
+     amiga_batch_file = 0;
+     DeleteFile (amiga_bname);        /* Ignore errors.  */
+  }
+#endif  /* Amiga */
+#ifdef WINDOWS32
+  {
+      HANDLE hPID;
+      char* arg0;
+
+      /* make UNC paths safe for CreateProcess -- backslash format */
+      arg0 = argv[0];
+      if (arg0 && arg0[0] == '/' && arg0[1] == '/')
+        for ( ; arg0 && *arg0; arg0++)
+          if (*arg0 == '/')
+            *arg0 = '\\';
+
+      /* make sure CreateProcess() has Path it needs */
+      sync_Path_environment ();
+
+#ifndef NO_OUTPUT_SYNC
+      /* Divert child output if output_sync in use.  */
+      if (child->output.syncout)
+        {
+          if (child->output.out >= 0)
+            outfd = child->output.out;
+          if (child->output.err >= 0)
+            errfd = child->output.err;
+        }
+#else
+      outfd = errfd = -1;
+#endif
+      hPID = process_easy (argv, child->environment, outfd, errfd);
+
+      if (hPID != INVALID_HANDLE_VALUE)
+        child->pid = (pid_t) hPID;
+      else
+        {
+          int i;
+          unblock_sigs ();
+          fprintf (stderr,
+                   _("process_easy() failed to launch process (e=%ld)\n"),
+                   process_last_err (hPID));
+          for (i = 0; argv[i]; i++)
+            fprintf (stderr, "%s ", argv[i]);
+          fprintf (stderr, _("\nCounted %d args in failed launch\n"), i);
+          goto error;
+        }
+  }
+#endif /* WINDOWS32 */
+#endif  /* __MSDOS__ or Amiga or WINDOWS32 */
+
+  /* Bump the number of jobs started in this second.  */
+  ++job_counter;
+
+  /* We are the parent side.  Set the state to
+     say the commands are running and return.  */
+
+  set_command_state (child->file, cs_running);
+
+  /* Free the storage used by the child's argument list.  */
+#ifndef VMS
+  free (argv[0]);
+  free (argv);
+#endif
+
+  OUTPUT_UNSET();
+  return;
+
+ error:
+  child->file->update_status = us_failed;
+  notice_finished_file (child->file);
+  OUTPUT_UNSET();
+}
+
+/* Try to start a child running.
+   Returns nonzero if the child was started (and maybe finished), or zero if
+   the load was too high and the child was put on the 'waiting_jobs' chain.  */
+
+static int
+start_waiting_job (struct child *c)
+{
+  struct file *f = c->file;
+
+  /* If we can start a job remotely, we always want to, and don't care about
+     the local load average.  We record that the job should be started
+     remotely in C->remote for start_job_command to test.  */
+
+  c->remote = start_remote_job_p (1);
+
+  /* If we are running at least one job already and the load average
+     is too high, make this one wait.  */
+  if (!c->remote
+      && ((job_slots_used > 0 && load_too_high ())
+#ifdef WINDOWS32
+          || (process_used_slots () >= MAXIMUM_WAIT_OBJECTS)
+#endif
+          ))
+    {
+      /* Put this child on the chain of children waiting for the load average
+         to go down.  */
+      set_command_state (f, cs_running);
+      c->next = waiting_jobs;
+      waiting_jobs = c;
+      return 0;
+    }
+
+  /* Start the first command; reap_children will run later command lines.  */
+  start_job_command (c);
+
+  switch (f->command_state)
+    {
+    case cs_running:
+      c->next = children;
+      DB (DB_JOBS, (_("Putting child %p (%s) PID %s%s on the chain.\n"),
+                    c, c->file->name, pid2str (c->pid),
+                    c->remote ? _(" (remote)") : ""));
+      children = c;
+      /* One more job slot is in use.  */
+      ++job_slots_used;
+      unblock_sigs ();
+      break;
+
+    case cs_not_started:
+      /* All the command lines turned out to be empty.  */
+      f->update_status = us_success;
+      /* FALLTHROUGH */
+
+    case cs_finished:
+      notice_finished_file (f);
+      free_child (c);
+      break;
+
+    default:
+      assert (f->command_state == cs_finished);
+      break;
+    }
+
+  return 1;
+}
+
+/* Create a 'struct child' for FILE and start its commands running.  */
+
+void
+new_job (struct file *file)
+{
+  struct commands *cmds = file->cmds;
+  struct child *c;
+  char **lines;
+  unsigned int i;
+
+  /* Let any previously decided-upon jobs that are waiting
+     for the load to go down start before this new one.  */
+  start_waiting_jobs ();
+
+  /* Reap any children that might have finished recently.  */
+  reap_children (0, 0);
+
+  /* Chop the commands up into lines if they aren't already.  */
+  chop_commands (cmds);
+
+  /* Start the command sequence, record it in a new
+     'struct child', and add that to the chain.  */
+
+  c = xcalloc (sizeof (struct child));
+  output_init (&c->output);
+
+  c->file = file;
+  c->sh_batch_file = NULL;
+
+  /* Cache dontcare flag because file->dontcare can be changed once we
+     return. Check dontcare inheritance mechanism for details.  */
+  c->dontcare = file->dontcare;
+
+  /* Start saving output in case the expansion uses $(info ...) etc.  */
+  OUTPUT_SET (&c->output);
+
+  /* Expand the command lines and store the results in LINES.  */
+  lines = xmalloc (cmds->ncommand_lines * sizeof (char *));
+  for (i = 0; i < cmds->ncommand_lines; ++i)
+    {
+      /* Collapse backslash-newline combinations that are inside variable
+         or function references.  These are left alone by the parser so
+         that they will appear in the echoing of commands (where they look
+         nice); and collapsed by construct_command_argv when it tokenizes.
+         But letting them survive inside function invocations loses because
+         we don't want the functions to see them as part of the text.  */
+
+      char *in, *out, *ref;
+
+      /* IN points to where in the line we are scanning.
+         OUT points to where in the line we are writing.
+         When we collapse a backslash-newline combination,
+         IN gets ahead of OUT.  */
+
+      in = out = cmds->command_lines[i];
+      while ((ref = strchr (in, '$')) != 0)
+        {
+          ++ref;                /* Move past the $.  */
+
+          if (out != in)
+            /* Copy the text between the end of the last chunk
+               we processed (where IN points) and the new chunk
+               we are about to process (where REF points).  */
+            memmove (out, in, ref - in);
+
+          /* Move both pointers past the boring stuff.  */
+          out += ref - in;
+          in = ref;
+
+          if (*ref == '(' || *ref == '{')
+            {
+              char openparen = *ref;
+              char closeparen = openparen == '(' ? ')' : '}';
+              char *outref;
+              int count;
+              char *p;
+
+              *out++ = *in++;   /* Copy OPENPAREN.  */
+              outref = out;
+              /* IN now points past the opening paren or brace.
+                 Count parens or braces until it is matched.  */
+              count = 0;
+              while (*in != '\0')
+                {
+                  if (*in == closeparen && --count < 0)
+                    break;
+                  else if (*in == '\\' && in[1] == '\n')
+                    {
+                      /* We have found a backslash-newline inside a
+                         variable or function reference.  Eat it and
+                         any following whitespace.  */
+
+                      int quoted = 0;
+                      for (p = in - 1; p > ref && *p == '\\'; --p)
+                        quoted = !quoted;
+
+                      if (quoted)
+                        /* There were two or more backslashes, so this is
+                           not really a continuation line.  We don't collapse
+                           the quoting backslashes here as is done in
+                           collapse_continuations, because the line will
+                           be collapsed again after expansion.  */
+                        *out++ = *in++;
+                      else
+                        {
+                          /* Skip the backslash, newline and
+                             any following whitespace.  */
+                          in = next_token (in + 2);
+
+                          /* Discard any preceding whitespace that has
+                             already been written to the output.  */
+                          while (out > outref
+                                 && isblank ((unsigned char)out[-1]))
+                            --out;
+
+                          /* Replace it all with a single space.  */
+                          *out++ = ' ';
+                        }
+                    }
+                  else
+                    {
+                      if (*in == openparen)
+                        ++count;
+
+                      *out++ = *in++;
+                    }
+                }
+            }
+        }
+
+      /* There are no more references in this line to worry about.
+         Copy the remaining uninteresting text to the output.  */
+      if (out != in)
+        memmove (out, in, strlen (in) + 1);
+
+      /* Finally, expand the line.  */
+      lines[i] = allocated_variable_expand_for_file (cmds->command_lines[i],
+                                                     file);
+    }
+
+  c->command_lines = lines;
+
+  /* Fetch the first command line to be run.  */
+  job_next_command (c);
+
+  /* Wait for a job slot to be freed up.  If we allow an infinite number
+     don't bother; also job_slots will == 0 if we're using the jobserver.  */
+
+  if (job_slots != 0)
+    while (job_slots_used == job_slots)
+      reap_children (1, 0);
+
+#ifdef MAKE_JOBSERVER
+  /* If we are controlling multiple jobs make sure we have a token before
+     starting the child. */
+
+  /* This can be inefficient.  There's a decent chance that this job won't
+     actually have to run any subprocesses: the command script may be empty
+     or otherwise optimized away.  It would be nice if we could defer
+     obtaining a token until just before we need it, in start_job_command.
+     To do that we'd need to keep track of whether we'd already obtained a
+     token (since start_job_command is called for each line of the job, not
+     just once).  Also more thought needs to go into the entire algorithm;
+     this is where the old parallel job code waits, so...  */
+
+#ifdef WINDOWS32
+  else if (has_jobserver_semaphore ())
+#else
+  else if (job_fds[0] >= 0)
+#endif
+    while (1)
+      {
+        int got_token;
+#ifndef WINDOWS32
+        char token;
+        int saved_errno;
+#endif
+
+        DB (DB_JOBS, ("Need a job token; we %shave children\n",
+                      children ? "" : "don't "));
+
+        /* If we don't already have a job started, use our "free" token.  */
+        if (!jobserver_tokens)
+          break;
+
+#ifndef WINDOWS32
+        /* Read a token.  As long as there's no token available we'll block.
+           We enable interruptible system calls before the read(2) so that if
+           we get a SIGCHLD while we're waiting, we'll return with EINTR and
+           we can process the death(s) and return tokens to the free pool.
+
+           Once we return from the read, we immediately reinstate restartable
+           system calls.  This allows us to not worry about checking for
+           EINTR on all the other system calls in the program.
+
+           There is one other twist: there is a span between the time
+           reap_children() does its last check for dead children and the time
+           the read(2) call is entered, below, where if a child dies we won't
+           notice.  This is extremely serious as it could cause us to
+           deadlock, given the right set of events.
+
+           To avoid this, we do the following: before we reap_children(), we
+           dup(2) the read FD on the jobserver pipe.  The read(2) call below
+           uses that new FD.  In the signal handler, we close that FD.  That
+           way, if a child dies during the section mentioned above, the
+           read(2) will be invoked with an invalid FD and will return
+           immediately with EBADF.  */
+
+        /* Make sure we have a dup'd FD.  */
+        if (job_rfd < 0)
+          {
+            DB (DB_JOBS, ("Duplicate the job FD\n"));
+            job_rfd = dup (job_fds[0]);
+          }
+#endif
+
+        /* Reap anything that's currently waiting.  */
+        reap_children (0, 0);
+
+        /* Kick off any jobs we have waiting for an opportunity that
+           can run now (i.e., waiting for load). */
+        start_waiting_jobs ();
+
+        /* If our "free" slot has become available, use it; we don't need an
+           actual token.  */
+        if (!jobserver_tokens)
+          break;
+
+        /* There must be at least one child already, or we have no business
+           waiting for a token. */
+        if (!children)
+          O (fatal, NILF, "INTERNAL: no children as we go to sleep on read\n");
+
+#ifdef WINDOWS32
+        /* On Windows we simply wait for the jobserver semaphore to become
+         * signalled or one of our child processes to terminate.
+         */
+        got_token = wait_for_semaphore_or_child_process ();
+        if (got_token < 0)
+          {
+            DWORD err = GetLastError ();
+            const char *estr = map_windows32_error_to_string (err);
+            ONS (fatal, NILF,
+                 _("semaphore or child process wait: (Error %ld: %s)"),
+                 err, estr);
+          }
+#else
+        /* Set interruptible system calls, and read() for a job token.  */
+        set_child_handler_action_flags (1, waiting_jobs != NULL);
+        got_token = read (job_rfd, &token, 1);
+        saved_errno = errno;
+        set_child_handler_action_flags (0, waiting_jobs != NULL);
+#endif
+
+        /* If we got one, we're done here.  */
+        if (got_token == 1)
+          {
+            DB (DB_JOBS, (_("Obtained token for child %p (%s).\n"),
+                          c, c->file->name));
+            break;
+          }
+
+#ifndef WINDOWS32
+        /* If the error _wasn't_ expected (EINTR or EBADF), punt.  Otherwise,
+           go back and reap_children(), and try again.  */
+        errno = saved_errno;
+        if (errno != EINTR && errno != EBADF)
+          pfatal_with_name (_("read jobs pipe"));
+        if (errno == EBADF)
+          DB (DB_JOBS, ("Read returned EBADF.\n"));
+#endif
+      }
+#endif
+
+  ++jobserver_tokens;
+
+  /* Trace the build.
+     Use message here so that changes to working directories are logged.  */
+  if (trace_flag)
+    {
+      char *newer = allocated_variable_expand_for_file ("$?", c->file);
+      const char *nm;
+
+      if (! cmds->fileinfo.filenm)
+        nm = _("<builtin>");
+      else
+        {
+          char *n = alloca (strlen (cmds->fileinfo.filenm) + 1 + 11 + 1);
+          sprintf (n, "%s:%lu", cmds->fileinfo.filenm, cmds->fileinfo.lineno);
+          nm = n;
+        }
+
+      if (newer[0] == '\0')
+        OSS (message, 0,
+             _("%s: target '%s' does not exist"), nm, c->file->name);
+      else
+        OSSS (message, 0,
+              _("%s: update target '%s' due to: %s"), nm, c->file->name, newer);
+
+      free (newer);
+    }
+
+  /* The job is now primed.  Start it running.
+     (This will notice if there is in fact no recipe.)  */
+  start_waiting_job (c);
+
+  if (job_slots == 1 || not_parallel)
+    /* Since there is only one job slot, make things run linearly.
+       Wait for the child to die, setting the state to 'cs_finished'.  */
+    while (file->command_state == cs_running)
+      reap_children (1, 0);
+
+  OUTPUT_UNSET ();
+  return;
+}
+
+/* Move CHILD's pointers to the next command for it to execute.
+   Returns nonzero if there is another command.  */
+
+static int
+job_next_command (struct child *child)
+{
+  while (child->command_ptr == 0 || *child->command_ptr == '\0')
+    {
+      /* There are no more lines in the expansion of this line.  */
+      if (child->command_line == child->file->cmds->ncommand_lines)
+        {
+          /* There are no more lines to be expanded.  */
+          child->command_ptr = 0;
+          return 0;
+        }
+      else
+        /* Get the next line to run.  */
+        child->command_ptr = child->command_lines[child->command_line++];
+    }
+  return 1;
+}
+
+/* Determine if the load average on the system is too high to start a new job.
+   The real system load average is only recomputed once a second.  However, a
+   very parallel make can easily start tens or even hundreds of jobs in a
+   second, which brings the system to its knees for a while until that first
+   batch of jobs clears out.
+
+   To avoid this we use a weighted algorithm to try to account for jobs which
+   have been started since the last second, and guess what the load average
+   would be now if it were computed.
+
+   This algorithm was provided by Thomas Riedl <thomas.riedl@siemens.com>,
+   who writes:
+
+!      calculate something load-oid and add to the observed sys.load,
+!      so that latter can catch up:
+!      - every job started increases jobctr;
+!      - every dying job decreases a positive jobctr;
+!      - the jobctr value gets zeroed every change of seconds,
+!        after its value*weight_b is stored into the 'backlog' value last_sec
+!      - weight_a times the sum of jobctr and last_sec gets
+!        added to the observed sys.load.
+!
+!      The two weights have been tried out on 24 and 48 proc. Sun Solaris-9
+!      machines, using a several-thousand-jobs-mix of cpp, cc, cxx and smallish
+!      sub-shelled commands (rm, echo, sed...) for tests.
+!      lowering the 'direct influence' factor weight_a (e.g. to 0.1)
+!      resulted in significant excession of the load limit, raising it
+!      (e.g. to 0.5) took bad to small, fast-executing jobs and didn't
+!      reach the limit in most test cases.
+!
+!      lowering the 'history influence' weight_b (e.g. to 0.1) resulted in
+!      exceeding the limit for longer-running stuff (compile jobs in
+!      the .5 to 1.5 sec. range),raising it (e.g. to 0.5) overrepresented
+!      small jobs' effects.
+
+ */
+
+#define LOAD_WEIGHT_A           0.25
+#define LOAD_WEIGHT_B           0.25
+
+static int
+load_too_high (void)
+{
+#if defined(__MSDOS__) || defined(VMS) || defined(_AMIGA) || defined(__riscos__)
+  return 1;
+#else
+  static double last_sec;
+  static time_t last_now;
+  double load, guess;
+  time_t now;
+
+#ifdef WINDOWS32
+  /* sub_proc.c cannot wait for more than MAXIMUM_WAIT_OBJECTS children */
+  if (process_used_slots () >= MAXIMUM_WAIT_OBJECTS)
+    return 1;
+#endif
+
+  if (max_load_average < 0)
+    return 0;
+
+  /* Find the real system load average.  */
+  make_access ();
+  if (getloadavg (&load, 1) != 1)
+    {
+      static int lossage = -1;
+      /* Complain only once for the same error.  */
+      if (lossage == -1 || errno != lossage)
+        {
+          if (errno == 0)
+            /* An errno value of zero means getloadavg is just unsupported.  */
+            O (error, NILF,
+               _("cannot enforce load limits on this operating system"));
+          else
+            perror_with_name (_("cannot enforce load limit: "), "getloadavg");
+        }
+      lossage = errno;
+      load = 0;
+    }
+  user_access ();
+
+  /* If we're in a new second zero the counter and correct the backlog
+     value.  Only keep the backlog for one extra second; after that it's 0.  */
+  now = time (NULL);
+  if (last_now < now)
+    {
+      if (last_now == now - 1)
+        last_sec = LOAD_WEIGHT_B * job_counter;
+      else
+        last_sec = 0.0;
+
+      job_counter = 0;
+      last_now = now;
+    }
+
+  /* Try to guess what the load would be right now.  */
+  guess = load + (LOAD_WEIGHT_A * (job_counter + last_sec));
+
+  DB (DB_JOBS, ("Estimated system load = %f (actual = %f) (max requested = %f)\n",
+                guess, load, max_load_average));
+
+  return guess >= max_load_average;
+#endif
+}
+
+/* Start jobs that are waiting for the load to be lower.  */
+
+void
+start_waiting_jobs (void)
+{
+  struct child *job;
+
+  if (waiting_jobs == 0)
+    return;
+
+  do
+    {
+      /* Check for recently deceased descendants.  */
+      reap_children (0, 0);
+
+      /* Take a job off the waiting list.  */
+      job = waiting_jobs;
+      waiting_jobs = job->next;
+
+      /* Try to start that job.  We break out of the loop as soon
+         as start_waiting_job puts one back on the waiting list.  */
+    }
+  while (start_waiting_job (job) && waiting_jobs != 0);
+
+  return;
+}
+
+#ifndef WINDOWS32
+
+/* EMX: Start a child process. This function returns the new pid.  */
+# if defined __EMX__
+int
+child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                   char **argv, char **envp)
+{
+  int pid;
+  int save_stdin = -1;
+  int save_stdout = -1;
+  int save_stderr = -1;
+
+  /* For each FD which needs to be redirected first make a dup of the standard
+     FD to save and mark it close on exec so our child won't see it.  Then
+     dup2() the standard FD to the redirect FD, and also mark the redirect FD
+     as close on exec. */
+  if (stdin_fd != FD_STDIN)
+    {
+      save_stdin = dup (FD_STDIN);
+      if (save_stdin < 0)
+        O (fatal, NILF, _("no more file handles: could not duplicate stdin\n"));
+      CLOSE_ON_EXEC (save_stdin);
+
+      dup2 (stdin_fd, FD_STDIN);
+      CLOSE_ON_EXEC (stdin_fd);
+    }
+
+  if (stdout_fd != FD_STDOUT)
+    {
+      save_stdout = dup (FD_STDOUT);
+      if (save_stdout < 0)
+        O (fatal, NILF,
+           _("no more file handles: could not duplicate stdout\n"));
+      CLOSE_ON_EXEC (save_stdout);
+
+      dup2 (stdout_fd, FD_STDOUT);
+      CLOSE_ON_EXEC (stdout_fd);
+    }
+
+  if (stderr_fd != FD_STDERR)
+    {
+      if (stderr_fd != stdout_fd)
+        {
+          save_stderr = dup (FD_STDERR);
+          if (save_stderr < 0)
+            O (fatal, NILF,
+               _("no more file handles: could not duplicate stderr\n"));
+          CLOSE_ON_EXEC (save_stderr);
+        }
+
+      dup2 (stderr_fd, FD_STDERR);
+      CLOSE_ON_EXEC (stderr_fd);
+    }
+
+  /* Run the command.  */
+  pid = exec_command (argv, envp);
+
+  /* Restore stdout/stdin/stderr of the parent and close temporary FDs.  */
+  if (save_stdin >= 0)
+    {
+      if (dup2 (save_stdin, FD_STDIN) != FD_STDIN)
+        O (fatal, NILF, _("Could not restore stdin\n"));
+      else
+        close (save_stdin);
+    }
+
+  if (save_stdout >= 0)
+    {
+      if (dup2 (save_stdout, FD_STDOUT) != FD_STDOUT)
+        O (fatal, NILF, _("Could not restore stdout\n"));
+      else
+        close (save_stdout);
+    }
+
+  if (save_stderr >= 0)
+    {
+      if (dup2 (save_stderr, FD_STDERR) != FD_STDERR)
+        O (fatal, NILF, _("Could not restore stderr\n"));
+      else
+        close (save_stderr);
+    }
+
+  return pid;
+}
+
+#elif !defined (_AMIGA) && !defined (__MSDOS__) && !defined (VMS)
+
+/* UNIX:
+   Replace the current process with one executing the command in ARGV.
+   STDIN_FD/STDOUT_FD/STDERR_FD are used as the process's stdin/stdout/stderr;
+   ENVP is the environment of the new program.  This function does not return.  */
+void
+child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                   char **argv, char **envp)
+{
+  /* For any redirected FD, dup2() it to the standard FD then close it.  */
+  if (stdin_fd != FD_STDIN)
+    {
+      dup2 (stdin_fd, FD_STDIN);
+      close (stdin_fd);
+    }
+
+  if (stdout_fd != FD_STDOUT)
+    dup2 (stdout_fd, FD_STDOUT);
+  if (stderr_fd != FD_STDERR)
+    dup2 (stderr_fd, FD_STDERR);
+
+  if (stdout_fd != FD_STDOUT)
+    close (stdout_fd);
+  if (stderr_fd != FD_STDERR && stderr_fd != stdout_fd)
+    close (stderr_fd);
+
+  /* Run the command.  */
+  exec_command (argv, envp);
+}
+#endif /* !AMIGA && !__MSDOS__ && !VMS */
+#endif /* !WINDOWS32 */
+
+#ifndef _AMIGA
+/* Replace the current process with one running the command in ARGV,
+   with environment ENVP.  This function does not return.  */
+
+/* EMX: This function returns the pid of the child process.  */
+# ifdef __EMX__
+int
+# else
+void
+# endif
+exec_command (char **argv, char **envp)
+{
+#ifdef VMS
+  /* to work around a problem with signals and execve: ignore them */
+#ifdef SIGCHLD
+  signal (SIGCHLD,SIG_IGN);
+#endif
+  /* Run the program.  */
+  execve (argv[0], argv, envp);
+  perror_with_name ("execve: ", argv[0]);
+  _exit (EXIT_FAILURE);
+#else
+#ifdef WINDOWS32
+  HANDLE hPID;
+  HANDLE hWaitPID;
+  int exit_code = EXIT_FAILURE;
+
+  /* make sure CreateProcess() has Path it needs */
+  sync_Path_environment ();
+
+  /* launch command */
+  hPID = process_easy (argv, envp, -1, -1);
+
+  /* make sure launch ok */
+  if (hPID == INVALID_HANDLE_VALUE)
+    {
+      int i;
+      fprintf (stderr, _("process_easy() failed to launch process (e=%ld)\n"),
+               process_last_err (hPID));
+      for (i = 0; argv[i]; i++)
+          fprintf (stderr, "%s ", argv[i]);
+      fprintf (stderr, _("\nCounted %d args in failed launch\n"), i);
+      exit (EXIT_FAILURE);
+    }
+
+  /* wait and reap last child */
+  hWaitPID = process_wait_for_any (1, 0);
+  while (hWaitPID)
+    {
+      /* was an error found on this process? */
+      int err = process_last_err (hWaitPID);
+
+      /* get exit data */
+      exit_code = process_exit_code (hWaitPID);
+
+      if (err)
+          fprintf (stderr, "make (e=%d, rc=%d): %s",
+                   err, exit_code, map_windows32_error_to_string (err));
+
+      /* cleanup process */
+      process_cleanup (hWaitPID);
+
+      /* expect to find only last pid, warn about other pids reaped */
+      if (hWaitPID == hPID)
+          break;
+      else
+        {
+          char *pidstr = xstrdup (pid2str ((pid_t)hWaitPID));
+
+          fprintf (stderr,
+                   _("make reaped child pid %s, still waiting for pid %s\n"),
+                   pidstr, pid2str ((pid_t)hPID));
+          free (pidstr);
+        }
+    }
+
+  /* return child's exit code as our exit code */
+  exit (exit_code);
+
+#else  /* !WINDOWS32 */
+
+# ifdef __EMX__
+  int pid;
+# endif
+
+  /* Be the user, permanently.  */
+  child_access ();
+
+# ifdef __EMX__
+  /* Run the program.  */
+  pid = spawnvpe (P_NOWAIT, argv[0], argv, envp);
+  if (pid >= 0)
+    return pid;
+
+  /* the file might have a strange shell extension */
+  if (errno == ENOENT)
+    errno = ENOEXEC;
+
+# else
+  /* Run the program.  */
+  environ = envp;
+  execvp (argv[0], argv);
+
+# endif /* !__EMX__ */
+
+  switch (errno)
+    {
+    case ENOENT:
+      OS (error, NILF, _("%s: Command not found"), argv[0]);
+      break;
+    case ENOEXEC:
+      {
+        /* The file is not executable.  Try it as a shell script.  */
+        extern char *getenv ();
+        const char *shell;
+        char **new_argv;
+        int argc;
+        int i=1;
+
+# ifdef __EMX__
+        /* Do not use $SHELL from the environment */
+        struct variable *p = lookup_variable ("SHELL", 5);
+        if (p)
+          shell = p->value;
+        else
+          shell = 0;
+# else
+        shell = getenv ("SHELL");
+# endif
+        if (shell == 0)
+          shell = default_shell;
+
+        argc = 1;
+        while (argv[argc] != 0)
+          ++argc;
+
+# ifdef __EMX__
+        if (!unixy_shell)
+          ++argc;
+# endif
+
+        new_argv = alloca ((1 + argc + 1) * sizeof (char *));
+        new_argv[0] = (char *)shell;
+
+# ifdef __EMX__
+        if (!unixy_shell)
+          {
+            new_argv[1] = "/c";
+            ++i;
+            --argc;
+          }
+# endif
+
+        new_argv[i] = argv[0];
+        while (argc > 0)
+          {
+            new_argv[i + argc] = argv[argc];
+            --argc;
+          }
+
+# ifdef __EMX__
+        pid = spawnvpe (P_NOWAIT, shell, new_argv, envp);
+        if (pid >= 0)
+          break;
+# else
+        execvp (shell, new_argv);
+# endif
+        if (errno == ENOENT)
+          OS (error, NILF, _("%s: Shell program not found"), shell);
+        else
+          perror_with_name ("execvp: ", shell);
+        break;
+      }
+
+# ifdef __EMX__
+    case EINVAL:
+      /* this nasty error was driving me nuts :-( */
+      O (error, NILF, _("spawnvpe: environment space might be exhausted"));
+      /* FALLTHROUGH */
+# endif
+
+    default:
+      perror_with_name ("execvp: ", argv[0]);
+      break;
+    }
+
+# ifdef __EMX__
+  return pid;
+# else
+  _exit (127);
+# endif
+#endif /* !WINDOWS32 */
+#endif /* !VMS */
+}
+#else /* On Amiga */
+void
+exec_command (char **argv)
+{
+  MyExecute (argv);
+}
+
+void clean_tmp (void)
+{
+  DeleteFile (amiga_bname);
+}
+
+#endif /* On Amiga */
+
+#ifndef VMS
+/* Figure out the argument list necessary to run LINE as a command.  Try to
+   avoid using a shell.  This routine handles only ' quoting, and " quoting
+   when no backslash, $ or ' characters are seen in the quotes.  Starting
+   quotes may be escaped with a backslash.  If any of the characters in
+   sh_chars is seen, or any of the builtin commands listed in sh_cmds
+   is the first word of a line, the shell is used.
+
+   If RESTP is not NULL, *RESTP is set to point to the first newline in LINE.
+   If *RESTP is NULL, newlines will be ignored.
+
+   SHELL is the shell to use, or nil to use the default shell.
+   IFS is the value of $IFS, or nil (meaning the default).
+
+   FLAGS is the value of lines_flags for this command line.  It is
+   used in the WINDOWS32 port to check whether + or $(MAKE) were found
+   in this command line, in which case the effect of just_print_flag
+   is overridden.  */
+
+static char **
+construct_command_argv_internal (char *line, char **restp, const char *shell,
+                                 const char *shellflags, const char *ifs,
+                                 int flags, char **batch_filename UNUSED)
+{
+#ifdef __MSDOS__
+  /* MSDOS supports both the stock DOS shell and ports of Unixy shells.
+     We call 'system' for anything that requires ''slow'' processing,
+     because DOS shells are too dumb.  When $SHELL points to a real
+     (unix-style) shell, 'system' just calls it to do everything.  When
+     $SHELL points to a DOS shell, 'system' does most of the work
+     internally, calling the shell only for its internal commands.
+     However, it looks on the $PATH first, so you can e.g. have an
+     external command named 'mkdir'.
+
+     Since we call 'system', certain characters and commands below are
+     actually not specific to COMMAND.COM, but to the DJGPP implementation
+     of 'system'.  In particular:
+
+       The shell wildcard characters are in DOS_CHARS because they will
+       not be expanded if we call the child via 'spawnXX'.
+
+       The ';' is in DOS_CHARS, because our 'system' knows how to run
+       multiple commands on a single line.
+
+       DOS_CHARS also include characters special to 4DOS/NDOS, so we
+       won't have to tell one from another and have one more set of
+       commands and special characters.  */
+  static const char *sh_chars_dos = "*?[];|<>%^&()";
+  static const char *sh_cmds_dos[] =
+    { "break", "call", "cd", "chcp", "chdir", "cls", "copy", "ctty", "date",
+      "del", "dir", "echo", "erase", "exit", "for", "goto", "if", "md",
+      "mkdir", "path", "pause", "prompt", "rd", "rmdir", "rem", "ren",
+      "rename", "set", "shift", "time", "type", "ver", "verify", "vol", ":",
+      0 };
+
+  static const char *sh_chars_sh = "#;\"*?[]&|<>(){}$`^";
+  static const char *sh_cmds_sh[] =
+    { "cd", "echo", "eval", "exec", "exit", "login", "logout", "set", "umask",
+      "wait", "while", "for", "case", "if", ":", ".", "break", "continue",
+      "export", "read", "readonly", "shift", "times", "trap", "switch",
+      "unset", "ulimit", 0 };
+
+  const char *sh_chars;
+  const char **sh_cmds;
+
+#elif defined (__EMX__)
+  static const char *sh_chars_dos = "*?[];|<>%^&()";
+  static const char *sh_cmds_dos[] =
+    { "break", "call", "cd", "chcp", "chdir", "cls", "copy", "ctty", "date",
+      "del", "dir", "echo", "erase", "exit", "for", "goto", "if", "md",
+      "mkdir", "path", "pause", "prompt", "rd", "rmdir", "rem", "ren",
+      "rename", "set", "shift", "time", "type", "ver", "verify", "vol", ":",
+      0 };
+
+  static const char *sh_chars_os2 = "*?[];|<>%^()\"'&";
+  static const char *sh_cmds_os2[] =
+    { "call", "cd", "chcp", "chdir", "cls", "copy", "date", "del", "detach",
+      "dir", "echo", "endlocal", "erase", "exit", "for", "goto", "if", "keys",
+      "md", "mkdir", "move", "path", "pause", "prompt", "rd", "rem", "ren",
+      "rename", "rmdir", "set", "setlocal", "shift", "start", "time", "type",
+      "ver", "verify", "vol", ":", 0 };
+
+  static const char *sh_chars_sh = "#;\"*?[]&|<>(){}$`^~'";
+  static const char *sh_cmds_sh[] =
+    { "echo", "cd", "eval", "exec", "exit", "login", "logout", "set", "umask",
+      "wait", "while", "for", "case", "if", ":", ".", "break", "continue",
+      "export", "read", "readonly", "shift", "times", "trap", "switch",
+      "unset", 0 };
+
+  const char *sh_chars;
+  const char **sh_cmds;
+
+#elif defined (_AMIGA)
+  static const char *sh_chars = "#;\"|<>()?*$`";
+  static const char *sh_cmds[] =
+    { "cd", "eval", "if", "delete", "echo", "copy", "rename", "set", "setenv",
+      "date", "makedir", "skip", "else", "endif", "path", "prompt", "unset",
+      "unsetenv", "version", 0 };
+
+#elif defined (WINDOWS32)
+  /* We used to have a double quote (") in sh_chars_dos[] below, but
+     that caused any command line with quoted file names be run
+     through a temporary batch file, which introduces command-line
+     limit of 4K charcaters imposed by cmd.exe.  Since CreateProcess
+     can handle quoted file names just fine, removing the quote lifts
+     the limit from a very frequent use case, because using quoted
+     file names is commonplace on MS-Windows.  */
+  static const char *sh_chars_dos = "|&<>";
+  static const char *sh_cmds_dos[] =
+    { "assoc", "break", "call", "cd", "chcp", "chdir", "cls", "color", "copy",
+      "ctty", "date", "del", "dir", "echo", "echo.", "endlocal", "erase",
+      "exit", "for", "ftype", "goto", "if", "if", "md", "mkdir", "move",
+      "path", "pause", "prompt", "rd", "rem", "ren", "rename", "rmdir",
+      "set", "setlocal", "shift", "time", "title", "type", "ver", "verify",
+      "vol", ":", 0 };
+
+  static const char *sh_chars_sh = "#;\"*?[]&|<>(){}$`^";
+  static const char *sh_cmds_sh[] =
+    { "cd", "eval", "exec", "exit", "login", "logout", "set", "umask", "wait",
+      "while", "for", "case", "if", ":", ".", "break", "continue", "export",
+      "read", "readonly", "shift", "times", "trap", "switch", "test",
+#ifdef BATCH_MODE_ONLY_SHELL
+      "echo",
+#endif
+      0 };
+
+  const char *sh_chars;
+  const char **sh_cmds;
+#elif defined(__riscos__)
+  static const char *sh_chars = "";
+  static const char *sh_cmds[] = { 0 };
+#else  /* must be UNIX-ish */
+  static const char *sh_chars = "#;\"*?[]&|<>(){}$`^~!";
+  static const char *sh_cmds[] =
+    { ".", ":", "break", "case", "cd", "continue", "eval", "exec", "exit",
+      "export", "for", "if", "login", "logout", "read", "readonly", "set",
+      "shift", "switch", "test", "times", "trap", "ulimit", "umask", "unset",
+      "wait", "while", 0 };
+
+# ifdef HAVE_DOS_PATHS
+  /* This is required if the MSYS/Cygwin ports (which do not define
+     WINDOWS32) are compiled with HAVE_DOS_PATHS defined, which uses
+     sh_chars_sh directly (see below).  The value must be identical
+     to that of sh_chars immediately above.  */
+  static const char *sh_chars_sh =  "#;\"*?[]&|<>(){}$`^~!";
+# endif  /* HAVE_DOS_PATHS */
+#endif
+  int i;
+  char *p;
+#ifndef NDEBUG
+  char *end;
+#endif
+  char *ap;
+  const char *cap;
+  const char *cp;
+  int instring, word_has_equals, seen_nonequals, last_argument_was_empty;
+  char **new_argv = 0;
+  char *argstr = 0;
+#ifdef WINDOWS32
+  int slow_flag = 0;
+
+  if (!unixy_shell)
+    {
+      sh_cmds = sh_cmds_dos;
+      sh_chars = sh_chars_dos;
+    }
+  else
+    {
+      sh_cmds = sh_cmds_sh;
+      sh_chars = sh_chars_sh;
+    }
+#endif /* WINDOWS32 */
+
+  if (restp != NULL)
+    *restp = NULL;
+
+  /* Make sure not to bother processing an empty line.  */
+  while (isblank ((unsigned char)*line))
+    ++line;
+  if (*line == '\0')
+    return 0;
+
+  if (shellflags == 0)
+    shellflags = posix_pedantic ? "-ec" : "-c";
+
+  /* See if it is safe to parse commands internally.  */
+  if (shell == 0)
+    shell = default_shell;
+#ifdef WINDOWS32
+  else if (strcmp (shell, default_shell))
+  {
+    char *s1 = _fullpath (NULL, shell, 0);
+    char *s2 = _fullpath (NULL, default_shell, 0);
+
+    slow_flag = strcmp ((s1 ? s1 : ""), (s2 ? s2 : ""));
+
+    free (s1);
+    free (s2);
+  }
+  if (slow_flag)
+    goto slow;
+#else  /* not WINDOWS32 */
+#if defined (__MSDOS__) || defined (__EMX__)
+  else if (strcasecmp (shell, default_shell))
+    {
+      extern int _is_unixy_shell (const char *_path);
+
+      DB (DB_BASIC, (_("$SHELL changed (was '%s', now '%s')\n"),
+                     default_shell, shell));
+      unixy_shell = _is_unixy_shell (shell);
+      /* we must allocate a copy of shell: construct_command_argv() will free
+       * shell after this function returns.  */
+      default_shell = xstrdup (shell);
+    }
+  if (unixy_shell)
+    {
+      sh_chars = sh_chars_sh;
+      sh_cmds  = sh_cmds_sh;
+    }
+  else
+    {
+      sh_chars = sh_chars_dos;
+      sh_cmds  = sh_cmds_dos;
+# ifdef __EMX__
+      if (_osmode == OS2_MODE)
+        {
+          sh_chars = sh_chars_os2;
+          sh_cmds = sh_cmds_os2;
+        }
+# endif
+    }
+#else  /* !__MSDOS__ */
+  else if (strcmp (shell, default_shell))
+    goto slow;
+#endif /* !__MSDOS__ && !__EMX__ */
+#endif /* not WINDOWS32 */
+
+  if (ifs)
+    for (cap = ifs; *cap != '\0'; ++cap)
+      if (*cap != ' ' && *cap != '\t' && *cap != '\n')
+        goto slow;
+
+  if (shellflags)
+    if (shellflags[0] != '-'
+        || ((shellflags[1] != 'c' || shellflags[2] != '\0')
+            && (shellflags[1] != 'e' || shellflags[2] != 'c' || shellflags[3] != '\0')))
+      goto slow;
+
+  i = strlen (line) + 1;
+
+  /* More than 1 arg per character is impossible.  */
+  new_argv = xmalloc (i * sizeof (char *));
+
+  /* All the args can fit in a buffer as big as LINE is.   */
+  ap = new_argv[0] = argstr = xmalloc (i);
+#ifndef NDEBUG
+  end = ap + i;
+#endif
+
+  /* I is how many complete arguments have been found.  */
+  i = 0;
+  instring = word_has_equals = seen_nonequals = last_argument_was_empty = 0;
+  for (p = line; *p != '\0'; ++p)
+    {
+      assert (ap <= end);
+
+      if (instring)
+        {
+          /* Inside a string, just copy any char except a closing quote
+             or a backslash-newline combination.  */
+          if (*p == instring)
+            {
+              instring = 0;
+              if (ap == new_argv[0] || *(ap-1) == '\0')
+                last_argument_was_empty = 1;
+            }
+          else if (*p == '\\' && p[1] == '\n')
+            {
+              /* Backslash-newline is handled differently depending on what
+                 kind of string we're in: inside single-quoted strings you
+                 keep them; in double-quoted strings they disappear.  For
+                 DOS/Windows/OS2, if we don't have a POSIX shell, we keep the
+                 pre-POSIX behavior of removing the backslash-newline.  */
+              if (instring == '"'
+#if defined (__MSDOS__) || defined (__EMX__) || defined (WINDOWS32)
+                  || !unixy_shell
+#endif
+                  )
+                ++p;
+              else
+                {
+                  *(ap++) = *(p++);
+                  *(ap++) = *p;
+                }
+            }
+          else if (*p == '\n' && restp != NULL)
+            {
+              /* End of the command line.  */
+              *restp = p;
+              goto end_of_line;
+            }
+          /* Backslash, $, and ` are special inside double quotes.
+             If we see any of those, punt.
+             But on MSDOS, if we use COMMAND.COM, double and single
+             quotes have the same effect.  */
+          else if (instring == '"' && strchr ("\\$`", *p) != 0 && unixy_shell)
+            goto slow;
+#ifdef WINDOWS32
+          else if (instring == '"' && strncmp (p, "\\\"", 2) == 0)
+            *ap++ = *++p;
+#endif
+          else
+            *ap++ = *p;
+        }
+      else if (strchr (sh_chars, *p) != 0)
+        /* Not inside a string, but it's a special char.  */
+        goto slow;
+      else if (one_shell && *p == '\n')
+        /* In .ONESHELL mode \n is a separator like ; or && */
+        goto slow;
+#ifdef  __MSDOS__
+      else if (*p == '.' && p[1] == '.' && p[2] == '.' && p[3] != '.')
+        /* '...' is a wildcard in DJGPP.  */
+        goto slow;
+#endif
+      else
+        /* Not a special char.  */
+        switch (*p)
+          {
+          case '=':
+            /* Equals is a special character in leading words before the
+               first word with no equals sign in it.  This is not the case
+               with sh -k, but we never get here when using nonstandard
+               shell flags.  */
+            if (! seen_nonequals && unixy_shell)
+              goto slow;
+            word_has_equals = 1;
+            *ap++ = '=';
+            break;
+
+          case '\\':
+            /* Backslash-newline has special case handling, ref POSIX.
+               We're in the fastpath, so emulate what the shell would do.  */
+            if (p[1] == '\n')
+              {
+                /* Throw out the backslash and newline.  */
+                ++p;
+
+                /* If there's nothing in this argument yet, skip any
+                   whitespace before the start of the next word.  */
+                if (ap == new_argv[i])
+                  p = next_token (p + 1) - 1;
+              }
+#ifdef WINDOWS32
+            /* Backslash before whitespace is not special if our shell
+               is not Unixy.  */
+            else if (isspace (p[1]) && !unixy_shell)
+              {
+                *ap++ = *p;
+                break;
+              }
+#endif
+            else if (p[1] != '\0')
+              {
+#ifdef HAVE_DOS_PATHS
+                /* Only remove backslashes before characters special to Unixy
+                   shells.  All other backslashes are copied verbatim, since
+                   they are probably DOS-style directory separators.  This
+                   still leaves a small window for problems, but at least it
+                   should work for the vast majority of naive users.  */
+
+#ifdef __MSDOS__
+                /* A dot is only special as part of the "..."
+                   wildcard.  */
+                if (strneq (p + 1, ".\\.\\.", 5))
+                  {
+                    *ap++ = '.';
+                    *ap++ = '.';
+                    p += 4;
+                  }
+                else
+#endif
+                  if (p[1] != '\\' && p[1] != '\''
+                      && !isspace ((unsigned char)p[1])
+                      && strchr (sh_chars_sh, p[1]) == 0)
+                    /* back up one notch, to copy the backslash */
+                    --p;
+#endif  /* HAVE_DOS_PATHS */
+
+                /* Copy and skip the following char.  */
+                *ap++ = *++p;
+              }
+            break;
+
+          case '\'':
+          case '"':
+            instring = *p;
+            break;
+
+          case '\n':
+            if (restp != NULL)
+              {
+                /* End of the command line.  */
+                *restp = p;
+                goto end_of_line;
+              }
+            else
+              /* Newlines are not special.  */
+              *ap++ = '\n';
+            break;
+
+          case ' ':
+          case '\t':
+            /* We have the end of an argument.
+               Terminate the text of the argument.  */
+            *ap++ = '\0';
+            new_argv[++i] = ap;
+            last_argument_was_empty = 0;
+
+            /* Update SEEN_NONEQUALS, which tells us if every word
+               heretofore has contained an '='.  */
+            seen_nonequals |= ! word_has_equals;
+            if (word_has_equals && ! seen_nonequals)
+              /* An '=' in a word before the first
+                 word without one is magical.  */
+              goto slow;
+            word_has_equals = 0; /* Prepare for the next word.  */
+
+            /* If this argument is the command name,
+               see if it is a built-in shell command.
+               If so, have the shell handle it.  */
+            if (i == 1)
+              {
+                register int j;
+                for (j = 0; sh_cmds[j] != 0; ++j)
+                  {
+                    if (streq (sh_cmds[j], new_argv[0]))
+                      goto slow;
+#if defined(__EMX__) || defined(WINDOWS32)
+                    /* Non-Unix shells are case insensitive.  */
+                    if (!unixy_shell
+                        && strcasecmp (sh_cmds[j], new_argv[0]) == 0)
+                      goto slow;
+#endif
+                  }
+              }
+
+            /* Ignore multiple whitespace chars.  */
+            p = next_token (p) - 1;
+            break;
+
+          default:
+            *ap++ = *p;
+            break;
+          }
+    }
+ end_of_line:
+
+  if (instring)
+    /* Let the shell deal with an unterminated quote.  */
+    goto slow;
+
+  /* Terminate the last argument and the argument list.  */
+
+  *ap = '\0';
+  if (new_argv[i][0] != '\0' || last_argument_was_empty)
+    ++i;
+  new_argv[i] = 0;
+
+  if (i == 1)
+    {
+      register int j;
+      for (j = 0; sh_cmds[j] != 0; ++j)
+        if (streq (sh_cmds[j], new_argv[0]))
+          goto slow;
+    }
+
+  if (new_argv[0] == 0)
+    {
+      /* Line was empty.  */
+      free (argstr);
+      free (new_argv);
+      return 0;
+    }
+
+  return new_argv;
+
+ slow:;
+  /* We must use the shell.  */
+
+  if (new_argv != 0)
+    {
+      /* Free the old argument list we were working on.  */
+      free (argstr);
+      free (new_argv);
+    }
+
+#ifdef __MSDOS__
+  execute_by_shell = 1; /* actually, call 'system' if shell isn't unixy */
+#endif
+
+#ifdef _AMIGA
+  {
+    char *ptr;
+    char *buffer;
+    char *dptr;
+
+    buffer = xmalloc (strlen (line)+1);
+
+    ptr = line;
+    for (dptr=buffer; *ptr; )
+    {
+      if (*ptr == '\\' && ptr[1] == '\n')
+        ptr += 2;
+      else if (*ptr == '@') /* Kludge: multiline commands */
+      {
+        ptr += 2;
+        *dptr++ = '\n';
+      }
+      else
+        *dptr++ = *ptr++;
+    }
+    *dptr = 0;
+
+    new_argv = xmalloc (2 * sizeof (char *));
+    new_argv[0] = buffer;
+    new_argv[1] = 0;
+  }
+#else   /* Not Amiga  */
+#ifdef WINDOWS32
+  /*
+   * Not eating this whitespace caused things like
+   *
+   *    sh -c "\n"
+   *
+   * which gave the shell fits. I think we have to eat
+   * whitespace here, but this code should be considered
+   * suspicious if things start failing....
+   */
+
+  /* Make sure not to bother processing an empty line.  */
+  while (isspace ((unsigned char)*line))
+    ++line;
+  if (*line == '\0')
+    return 0;
+#endif /* WINDOWS32 */
+
+  {
+    /* SHELL may be a multi-word command.  Construct a command line
+       "$(SHELL) $(.SHELLFLAGS) LINE", with all special chars in LINE escaped.
+       Then recurse, expanding this command line to get the final
+       argument list.  */
+
+    char *new_line;
+    unsigned int shell_len = strlen (shell);
+    unsigned int line_len = strlen (line);
+    unsigned int sflags_len = shellflags ? strlen (shellflags) : 0;
+#ifdef WINDOWS32
+    char *command_ptr = NULL; /* used for batch_mode_shell mode */
+#endif
+
+# ifdef __EMX__ /* is this necessary? */
+    if (!unixy_shell && shellflags)
+      shellflags[0] = '/'; /* "/c" */
+# endif
+
+    /* In .ONESHELL mode we are allowed to throw the entire current
+        recipe string at a single shell and trust that the user
+        has configured the shell and shell flags, and formatted
+        the string, appropriately. */
+    if (one_shell)
+      {
+        /* If the shell is Bourne compatible, we must remove and ignore
+           interior special chars [@+-] because they're meaningless to
+           the shell itself. If, however, we're in .ONESHELL mode and
+           have changed SHELL to something non-standard, we should
+           leave those alone because they could be part of the
+           script. In this case we must also leave in place
+           any leading [@+-] for the same reason.  */
+
+        /* Remove and ignore interior prefix chars [@+-] because they're
+             meaningless given a single shell. */
+#if defined __MSDOS__ || defined (__EMX__)
+        if (unixy_shell)     /* the test is complicated and we already did it */
+#else
+        if (is_bourne_compatible_shell (shell)
+#ifdef WINDOWS32
+            /* If we didn't find any sh.exe, don't behave is if we did!  */
+            && !no_default_sh_exe
+#endif
+            )
+#endif
+          {
+            const char *f = line;
+            char *t = line;
+
+            /* Copy the recipe, removing and ignoring interior prefix chars
+               [@+-]: they're meaningless in .ONESHELL mode.  */
+            while (f[0] != '\0')
+              {
+                int esc = 0;
+
+                /* This is the start of a new recipe line.
+                   Skip whitespace and prefix characters.  */
+                while (isblank (*f) || *f == '-' || *f == '@' || *f == '+')
+                  ++f;
+
+                /* Copy until we get to the next logical recipe line.  */
+                while (*f != '\0')
+                  {
+                    *(t++) = *(f++);
+                    if (f[-1] == '\\')
+                      esc = !esc;
+                    else
+                      {
+                        /* On unescaped newline, we're done with this line.  */
+                        if (f[-1] == '\n' && ! esc)
+                          break;
+
+                        /* Something else: reset the escape sequence.  */
+                        esc = 0;
+                      }
+                  }
+              }
+            *t = '\0';
+          }
+#ifdef WINDOWS32
+        else    /* non-Posix shell (cmd.exe etc.) */
+          {
+            const char *f = line;
+            char *t = line;
+            char *tstart = t;
+            int temp_fd;
+            FILE* batch = NULL;
+            int id = GetCurrentProcessId ();
+            PATH_VAR(fbuf);
+
+            /* Generate a file name for the temporary batch file.  */
+            sprintf (fbuf, "make%d", id);
+            *batch_filename = create_batch_file (fbuf, 0, &temp_fd);
+            DB (DB_JOBS, (_("Creating temporary batch file %s\n"),
+                          *batch_filename));
+
+            /* Create a FILE object for the batch file, and write to it the
+               commands to be executed.  Put the batch file in TEXT mode.  */
+            _setmode (temp_fd, _O_TEXT);
+            batch = _fdopen (temp_fd, "wt");
+            fputs ("@echo off\n", batch);
+            DB (DB_JOBS, (_("Batch file contents:\n\t@echo off\n")));
+
+            /* Copy the recipe, removing and ignoring interior prefix chars
+               [@+-]: they're meaningless in .ONESHELL mode.  */
+            while (*f != '\0')
+              {
+                /* This is the start of a new recipe line.
+                   Skip whitespace and prefix characters.  */
+                while (isblank (*f) || *f == '-' || *f == '@' || *f == '+')
+                  ++f;
+
+                /* Copy until we get to the next logical recipe line.  */
+                while (*f != '\0')
+                  {
+                    /* Remove the escaped newlines in the command, and
+                       the whitespace that follows them.  Windows
+                       shells cannot handle escaped newlines.  */
+                    if (*f == '\\' && f[1] == '\n')
+                      {
+                        f += 2;
+                        while (isblank (*f))
+                          ++f;
+                      }
+                    *(t++) = *(f++);
+                    /* On an unescaped newline, we're done with this
+                       line.  */
+                    if (f[-1] == '\n')
+                      break;
+                  }
+                /* Write another line into the batch file.  */
+                if (t > tstart)
+                  {
+                    int c = *t;
+                    *t = '\0';
+                    fputs (tstart, batch);
+                    DB (DB_JOBS, ("\t%s", tstart));
+                    tstart = t;
+                    *t = c;
+                  }
+              }
+            DB (DB_JOBS, ("\n"));
+            fclose (batch);
+
+            /* Create an argv list for the shell command line that
+               will run the batch file.  */
+            new_argv = xmalloc (2 * sizeof (char *));
+            new_argv[0] = xstrdup (*batch_filename);
+            new_argv[1] = NULL;
+            return new_argv;
+          }
+#endif /* WINDOWS32 */
+        /* Create an argv list for the shell command line.  */
+        {
+          int n = 0;
+
+          new_argv = xmalloc ((4 + sflags_len/2) * sizeof (char *));
+          new_argv[n++] = xstrdup (shell);
+
+          /* Chop up the shellflags (if any) and assign them.  */
+          if (! shellflags)
+            new_argv[n++] = xstrdup ("");
+          else
+            {
+              const char *s = shellflags;
+              char *t;
+              unsigned int len;
+              while ((t = find_next_token (&s, &len)) != 0)
+                new_argv[n++] = xstrndup (t, len);
+            }
+
+          /* Set the command to invoke.  */
+          new_argv[n++] = line;
+          new_argv[n++] = NULL;
+        }
+        return new_argv;
+      }
+
+    new_line = xmalloc ((shell_len*2) + 1 + sflags_len + 1
+                        + (line_len*2) + 1);
+    ap = new_line;
+    /* Copy SHELL, escaping any characters special to the shell.  If
+       we don't escape them, construct_command_argv_internal will
+       recursively call itself ad nauseam, or until stack overflow,
+       whichever happens first.  */
+    for (cp = shell; *cp != '\0'; ++cp)
+      {
+        if (strchr (sh_chars, *cp) != 0)
+          *(ap++) = '\\';
+        *(ap++) = *cp;
+      }
+    *(ap++) = ' ';
+    if (shellflags)
+      memcpy (ap, shellflags, sflags_len);
+    ap += sflags_len;
+    *(ap++) = ' ';
+#ifdef WINDOWS32
+    command_ptr = ap;
+#endif
+    for (p = line; *p != '\0'; ++p)
+      {
+        if (restp != NULL && *p == '\n')
+          {
+            *restp = p;
+            break;
+          }
+        else if (*p == '\\' && p[1] == '\n')
+          {
+            /* POSIX says we keep the backslash-newline.  If we don't have a
+               POSIX shell on DOS/Windows/OS2, mimic the pre-POSIX behavior
+               and remove the backslash/newline.  */
+#if defined (__MSDOS__) || defined (__EMX__) || defined (WINDOWS32)
+# define PRESERVE_BSNL  unixy_shell
+#else
+# define PRESERVE_BSNL  1
+#endif
+            if (PRESERVE_BSNL)
+              {
+                *(ap++) = '\\';
+                /* Only non-batch execution needs another backslash,
+                   because it will be passed through a recursive
+                   invocation of this function.  */
+                if (!batch_mode_shell)
+                  *(ap++) = '\\';
+                *(ap++) = '\n';
+              }
+            ++p;
+            continue;
+          }
+
+        /* DOS shells don't know about backslash-escaping.  */
+        if (unixy_shell && !batch_mode_shell &&
+            (*p == '\\' || *p == '\'' || *p == '"'
+             || isspace ((unsigned char)*p)
+             || strchr (sh_chars, *p) != 0))
+          *ap++ = '\\';
+#ifdef __MSDOS__
+        else if (unixy_shell && strneq (p, "...", 3))
+          {
+            /* The case of '...' wildcard again.  */
+            strcpy (ap, "\\.\\.\\");
+            ap += 5;
+            p  += 2;
+          }
+#endif
+        *ap++ = *p;
+      }
+    if (ap == new_line + shell_len + sflags_len + 2)
+      {
+        /* Line was empty.  */
+        free (new_line);
+        return 0;
+      }
+    *ap = '\0';
+
+#ifdef WINDOWS32
+    /* Some shells do not work well when invoked as 'sh -c xxx' to run a
+       command line (e.g. Cygnus GNUWIN32 sh.exe on WIN32 systems).  In these
+       cases, run commands via a script file.  */
+    if (just_print_flag && !(flags & COMMANDS_RECURSE))
+      {
+        /* Need to allocate new_argv, although it's unused, because
+           start_job_command will want to free it and its 0'th element.  */
+        new_argv = xmalloc (2 * sizeof (char *));
+        new_argv[0] = xstrdup ("");
+        new_argv[1] = NULL;
+      }
+    else if ((no_default_sh_exe || batch_mode_shell) && batch_filename)
+      {
+        int temp_fd;
+        FILE* batch = NULL;
+        int id = GetCurrentProcessId ();
+        PATH_VAR (fbuf);
+
+        /* create a file name */
+        sprintf (fbuf, "make%d", id);
+        *batch_filename = create_batch_file (fbuf, unixy_shell, &temp_fd);
+
+        DB (DB_JOBS, (_("Creating temporary batch file %s\n"),
+                      *batch_filename));
+
+        /* Create a FILE object for the batch file, and write to it the
+           commands to be executed.  Put the batch file in TEXT mode.  */
+        _setmode (temp_fd, _O_TEXT);
+        batch = _fdopen (temp_fd, "wt");
+        if (!unixy_shell)
+          fputs ("@echo off\n", batch);
+        fputs (command_ptr, batch);
+        fputc ('\n', batch);
+        fclose (batch);
+        DB (DB_JOBS, (_("Batch file contents:%s\n\t%s\n"),
+                      !unixy_shell ? "\n\t@echo off" : "", command_ptr));
+
+        /* create argv */
+        new_argv = xmalloc (3 * sizeof (char *));
+        if (unixy_shell)
+          {
+            new_argv[0] = xstrdup (shell);
+            new_argv[1] = *batch_filename; /* only argv[0] gets freed later */
+          }
+        else
+          {
+            new_argv[0] = xstrdup (*batch_filename);
+            new_argv[1] = NULL;
+          }
+        new_argv[2] = NULL;
+      }
+    else
+#endif /* WINDOWS32 */
+
+    if (unixy_shell)
+      new_argv = construct_command_argv_internal (new_line, 0, 0, 0, 0,
+                                                  flags, 0);
+
+#ifdef __EMX__
+    else if (!unixy_shell)
+      {
+        /* new_line is local, must not be freed therefore
+           We use line here instead of new_line because we run the shell
+           manually.  */
+        size_t line_len = strlen (line);
+        char *p = new_line;
+        char *q = new_line;
+        memcpy (new_line, line, line_len + 1);
+        /* Replace all backslash-newline combination and also following tabs.
+           Important: stop at the first '\n' because that's what the loop above
+           did. The next line starting at restp[0] will be executed during the
+           next call of this function. */
+        while (*q != '\0' && *q != '\n')
+          {
+            if (q[0] == '\\' && q[1] == '\n')
+              q += 2; /* remove '\\' and '\n' */
+            else
+              *p++ = *q++;
+          }
+        *p = '\0';
+
+# ifndef NO_CMD_DEFAULT
+        if (strnicmp (new_line, "echo", 4) == 0
+            && (new_line[4] == ' ' || new_line[4] == '\t'))
+          {
+            /* the builtin echo command: handle it separately */
+            size_t echo_len = line_len - 5;
+            char *echo_line = new_line + 5;
+
+            /* special case: echo 'x="y"'
+               cmd works this way: a string is printed as is, i.e., no quotes
+               are removed. But autoconf uses a command like echo 'x="y"' to
+               determine whether make works. autoconf expects the output x="y"
+               so we will do exactly that.
+               Note: if we do not allow cmd to be the default shell
+               we do not need this kind of voodoo */
+            if (echo_line[0] == '\''
+                && echo_line[echo_len - 1] == '\''
+                && strncmp (echo_line + 1, "ac_maketemp=",
+                            strlen ("ac_maketemp=")) == 0)
+              {
+                /* remove the enclosing quotes */
+                memmove (echo_line, echo_line + 1, echo_len - 2);
+                echo_line[echo_len - 2] = '\0';
+              }
+          }
+# endif
+
+        {
+          /* Let the shell decide what to do. Put the command line into the
+             2nd command line argument and hope for the best ;-)  */
+          size_t sh_len = strlen (shell);
+
+          /* exactly 3 arguments + NULL */
+          new_argv = xmalloc (4 * sizeof (char *));
+          /* Exactly strlen(shell) + strlen("/c") + strlen(line) + 3 times
+             the trailing '\0' */
+          new_argv[0] = xmalloc (sh_len + line_len + 5);
+          memcpy (new_argv[0], shell, sh_len + 1);
+          new_argv[1] = new_argv[0] + sh_len + 1;
+          memcpy (new_argv[1], "/c", 3);
+          new_argv[2] = new_argv[1] + 3;
+          memcpy (new_argv[2], new_line, line_len + 1);
+          new_argv[3] = NULL;
+        }
+      }
+#elif defined(__MSDOS__)
+    else
+      {
+        /* With MSDOS shells, we must construct the command line here
+           instead of recursively calling ourselves, because we
+           cannot backslash-escape the special characters (see above).  */
+        new_argv = xmalloc (sizeof (char *));
+        line_len = strlen (new_line) - shell_len - sflags_len - 2;
+        new_argv[0] = xmalloc (line_len + 1);
+        strncpy (new_argv[0],
+                 new_line + shell_len + sflags_len + 2, line_len);
+        new_argv[0][line_len] = '\0';
+      }
+#else
+    else
+      fatal (NILF, CSTRLEN (__FILE__) + INTSTR_LENGTH,
+             _("%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"),
+            __FILE__, __LINE__);
+#endif
+
+    free (new_line);
+  }
+#endif  /* ! AMIGA */
+
+  return new_argv;
+}
+#endif /* !VMS */
+
+/* Figure out the argument list necessary to run LINE as a command.  Try to
+   avoid using a shell.  This routine handles only ' quoting, and " quoting
+   when no backslash, $ or ' characters are seen in the quotes.  Starting
+   quotes may be escaped with a backslash.  If any of the characters in
+   sh_chars is seen, or any of the builtin commands listed in sh_cmds
+   is the first word of a line, the shell is used.
+
+   If RESTP is not NULL, *RESTP is set to point to the first newline in LINE.
+   If *RESTP is NULL, newlines will be ignored.
+
+   FILE is the target whose commands these are.  It is used for
+   variable expansion for $(SHELL) and $(IFS).  */
+
+char **
+construct_command_argv (char *line, char **restp, struct file *file,
+                        int cmd_flags, char **batch_filename)
+{
+  char *shell, *ifs, *shellflags;
+  char **argv;
+
+#ifdef VMS
+  char *cptr;
+  int argc;
+
+  argc = 0;
+  cptr = line;
+  for (;;)
+    {
+      while ((*cptr != 0)
+             && (isspace ((unsigned char)*cptr)))
+        cptr++;
+      if (*cptr == 0)
+        break;
+      while ((*cptr != 0)
+             && (!isspace ((unsigned char)*cptr)))
+        cptr++;
+      argc++;
+    }
+
+  argv = xmalloc (argc * sizeof (char *));
+  if (argv == 0)
+    abort ();
+
+  cptr = line;
+  argc = 0;
+  for (;;)
+    {
+      while ((*cptr != 0)
+             && (isspace ((unsigned char)*cptr)))
+        cptr++;
+      if (*cptr == 0)
+        break;
+      DB (DB_JOBS, ("argv[%d] = [%s]\n", argc, cptr));
+      argv[argc++] = cptr;
+      while ((*cptr != 0)
+             && (!isspace ((unsigned char)*cptr)))
+        cptr++;
+      if (*cptr != 0)
+        *cptr++ = 0;
+    }
+#else
+  {
+    /* Turn off --warn-undefined-variables while we expand SHELL and IFS.  */
+    int save = warn_undefined_variables_flag;
+    warn_undefined_variables_flag = 0;
+
+    shell = allocated_variable_expand_for_file ("$(SHELL)", file);
+#ifdef WINDOWS32
+    /*
+     * Convert to forward slashes so that construct_command_argv_internal()
+     * is not confused.
+     */
+    if (shell)
+      {
+        char *p = w32ify (shell, 0);
+        strcpy (shell, p);
+      }
+#endif
+#ifdef __EMX__
+    {
+      static const char *unixroot = NULL;
+      static const char *last_shell = "";
+      static int init = 0;
+      if (init == 0)
+        {
+          unixroot = getenv ("UNIXROOT");
+          /* unixroot must be NULL or not empty */
+          if (unixroot && unixroot[0] == '\0') unixroot = NULL;
+          init = 1;
+        }
+
+      /* if we have an unixroot drive and if shell is not default_shell
+         (which means it's either cmd.exe or the test has already been
+         performed) and if shell is an absolute path without drive letter,
+         try whether it exists e.g.: if "/bin/sh" does not exist use
+         "$UNIXROOT/bin/sh" instead.  */
+      if (unixroot && shell && strcmp (shell, last_shell) != 0
+          && (shell[0] == '/' || shell[0] == '\\'))
+        {
+          /* trying a new shell, check whether it exists */
+          size_t size = strlen (shell);
+          char *buf = xmalloc (size + 7);
+          memcpy (buf, shell, size);
+          memcpy (buf + size, ".exe", 5); /* including the trailing '\0' */
+          if (access (shell, F_OK) != 0 && access (buf, F_OK) != 0)
+            {
+              /* try the same for the unixroot drive */
+              memmove (buf + 2, buf, size + 5);
+              buf[0] = unixroot[0];
+              buf[1] = unixroot[1];
+              if (access (buf, F_OK) == 0)
+                /* we have found a shell! */
+                /* free(shell); */
+                shell = buf;
+              else
+                free (buf);
+            }
+          else
+            free (buf);
+        }
+    }
+#endif /* __EMX__ */
+
+    shellflags = allocated_variable_expand_for_file ("$(.SHELLFLAGS)", file);
+    ifs = allocated_variable_expand_for_file ("$(IFS)", file);
+
+    warn_undefined_variables_flag = save;
+  }
+
+  argv = construct_command_argv_internal (line, restp, shell, shellflags, ifs,
+                                          cmd_flags, batch_filename);
+
+  free (shell);
+  free (shellflags);
+  free (ifs);
+#endif /* !VMS */
+  return argv;
+}
+
+#if !defined(HAVE_DUP2) && !defined(_AMIGA)
+int
+dup2 (int old, int new)
+{
+  int fd;
+
+  (void) close (new);
+  fd = dup (old);
+  if (fd != new)
+    {
+      (void) close (fd);
+      errno = EMFILE;
+      return -1;
+    }
+
+  return fd;
+}
+#endif /* !HAVE_DUP2 && !_AMIGA */
+
+/* On VMS systems, include special VMS functions.  */
+
+#ifdef VMS
+#include "vmsjobs.c"
+#endif
diff --git a/job.h b/job.h
new file mode 100644
index 0000000..3c921ba
--- /dev/null
+++ b/job.h
@@ -0,0 +1,159 @@
+/* Definitions for managing subprocesses in GNU Make.
+Copyright (C) 1992-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "output.h"
+
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+#else
+# include <sys/file.h>
+#endif
+
+/* How to set close-on-exec for a file descriptor.  */
+
+#if !defined F_SETFD
+# ifdef WINDOWS32
+#  define CLOSE_ON_EXEC(_d)  process_noinherit(_d)
+# else
+#  define CLOSE_ON_EXEC(_d)
+# endif
+#else
+# ifndef FD_CLOEXEC
+#  define FD_CLOEXEC 1
+# endif
+# define CLOSE_ON_EXEC(_d) (void) fcntl ((_d), F_SETFD, FD_CLOEXEC)
+#endif
+
+#ifdef NO_OUTPUT_SYNC
+# define RECORD_SYNC_MUTEX(m) \
+    O (error, NILF,                                                    \
+       _("-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."));
+#else
+# ifdef WINDOWS32
+/* For emulations in w32/compat/posixfcn.c.  */
+#  define F_GETFD 1
+#  define F_SETLKW 2
+/* Implementation note: None of the values of l_type below can be zero
+   -- they are compared with a static instance of the struct, so zero
+   means unknown/invalid, see w32/compat/posixfcn.c. */
+#  define F_WRLCK 1
+#  define F_UNLCK 2
+
+struct flock
+  {
+    short l_type;
+    short l_whence;
+    off_t l_start;
+    off_t l_len;
+    pid_t l_pid;
+  };
+
+/* This type is actually a HANDLE, but we want to avoid including
+   windows.h as much as possible.  */
+typedef intptr_t sync_handle_t;
+
+/* Public functions emulated/provided in posixfcn.c.  */
+int fcntl (intptr_t fd, int cmd, ...);
+intptr_t create_mutex (void);
+int same_stream (FILE *f1, FILE *f2);
+
+#  define RECORD_SYNC_MUTEX(m) record_sync_mutex(m)
+void record_sync_mutex (const char *str);
+void prepare_mutex_handle_string (intptr_t hdl);
+# else  /* !WINDOWS32 */
+
+typedef int sync_handle_t;      /* file descriptor */
+
+#  define RECORD_SYNC_MUTEX(m) (void)(m)
+
+# endif
+#endif  /* !NO_OUTPUT_SYNC */
+
+/* Structure describing a running or dead child process.  */
+
+struct child
+  {
+    struct child *next;         /* Link in the chain.  */
+
+    struct file *file;          /* File being remade.  */
+
+    char **environment;         /* Environment for commands.  */
+    char *sh_batch_file;        /* Script file for shell commands */
+    char **command_lines;       /* Array of variable-expanded cmd lines.  */
+    char *command_ptr;          /* Ptr into command_lines[command_line].  */
+
+#ifdef VMS
+    char *comname;              /* Temporary command file name */
+    int efn;                    /* Completion event flag number */
+    int cstatus;                /* Completion status */
+#endif
+
+    unsigned int  command_line; /* Index into command_lines.  */
+    struct output output;       /* Output for this child.  */
+    pid_t         pid;          /* Child process's ID number.  */
+    unsigned int  remote:1;     /* Nonzero if executing remotely.  */
+    unsigned int  noerror:1;    /* Nonzero if commands contained a '-'.  */
+    unsigned int  good_stdin:1; /* Nonzero if this child has a good stdin.  */
+    unsigned int  deleted:1;    /* Nonzero if targets have been deleted.  */
+    unsigned int  dontcare:1;   /* Saved dontcare flag.  */
+  };
+
+extern struct child *children;
+
+int is_bourne_compatible_shell(const char *path);
+void new_job (struct file *file);
+void reap_children (int block, int err);
+void start_waiting_jobs (void);
+
+char **construct_command_argv (char *line, char **restp, struct file *file,
+                               int cmd_flags, char** batch_file);
+#ifdef VMS
+int child_execute_job (char *argv, struct child *child);
+#else
+# define FD_STDIN       (fileno (stdin))
+# define FD_STDOUT      (fileno (stdout))
+# define FD_STDERR      (fileno (stderr))
+# if defined(__EMX__)
+int child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                       char **argv, char **envp);
+# else
+void child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                        char **argv, char **envp) __attribute__ ((noreturn));
+# endif
+#endif
+#ifdef _AMIGA
+void exec_command (char **argv) __attribute__ ((noreturn));
+#elif defined(__EMX__)
+int exec_command (char **argv, char **envp);
+#else
+void exec_command (char **argv, char **envp) __attribute__ ((noreturn));
+#endif
+
+extern unsigned int job_slots_used;
+
+void block_sigs (void);
+#ifdef POSIX
+void unblock_sigs (void);
+#else
+#ifdef  HAVE_SIGSETMASK
+extern int fatal_signal_mask;
+#define unblock_sigs()  sigsetmask (0)
+#else
+#define unblock_sigs()
+#endif
+#endif
+
+extern unsigned int jobserver_tokens;
diff --git a/load.c b/load.c
new file mode 100644
index 0000000..79294b3
--- /dev/null
+++ b/load.c
@@ -0,0 +1,255 @@
+/* Loading dynamic objects for GNU Make.
+Copyright (C) 2012-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#if MAKE_LOAD
+
+#include <string.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <dlfcn.h>
+#include <errno.h>
+
+#define SYMBOL_EXTENSION        "_gmk_setup"
+
+#include "debug.h"
+#include "filedef.h"
+#include "variable.h"
+
+/* Tru64 V4.0 does not have this flag */
+#ifndef RTLD_GLOBAL
+# define RTLD_GLOBAL 0
+#endif
+
+struct load_list
+  {
+    struct load_list *next;
+    const char *name;
+    void *dlp;
+  };
+
+static struct load_list *loaded_syms = NULL;
+
+static load_func_t
+load_object (const gmk_floc *flocp, int noerror,
+             const char *ldname, const char *symname)
+{
+  static void *global_dl = NULL;
+  load_func_t symp;
+
+  if (! global_dl)
+    {
+      global_dl = dlopen (NULL, RTLD_NOW|RTLD_GLOBAL);
+      if (! global_dl)
+        {
+          const char *err = dlerror ();
+          OS (fatal, flocp, _("Failed to open global symbol table: %s"), err);
+        }
+    }
+
+  symp = (load_func_t) dlsym (global_dl, symname);
+  if (! symp)
+    {
+      struct load_list *new;
+      void *dlp = NULL;
+
+    /* If the path has no "/", try the current directory first.  */
+      if (! strchr (ldname, '/')
+#ifdef HAVE_DOS_PATHS
+          && ! strchr (ldname, '\\')
+#endif
+         )
+        dlp = dlopen (concat (2, "./", ldname), RTLD_LAZY|RTLD_GLOBAL);
+
+      /* If we haven't opened it yet, try the default search path.  */
+      if (! dlp)
+        dlp = dlopen (ldname, RTLD_LAZY|RTLD_GLOBAL);
+
+      /* Still no?  Then fail.  */
+      if (! dlp)
+        {
+          const char *err = dlerror ();
+          if (noerror)
+            DB (DB_BASIC, ("%s", err));
+          else
+            OS (error, flocp, "%s", err);
+          return NULL;
+        }
+
+      /* Assert that the GPL license symbol is defined.  */
+      symp = (load_func_t) dlsym (dlp, "plugin_is_GPL_compatible");
+      if (! symp)
+        OS (fatal, flocp,
+             _("Loaded object %s is not declared to be GPL compatible"),
+             ldname);
+
+      symp = (load_func_t) dlsym (dlp, symname);
+      if (! symp)
+        {
+          const char *err = dlerror ();
+          OSSS (fatal, flocp, _("Failed to load symbol %s from %s: %s"),
+                symname, ldname, err);
+        }
+
+      /* Add this symbol to a trivial lookup table.  This is not efficient but
+         it's highly unlikely we'll be loading lots of objects, and we only
+         need it to look them up on unload, if we rebuild them.  */
+      new = xmalloc (sizeof (struct load_list));
+      new->name = xstrdup (ldname);
+      new->dlp = dlp;
+      new->next = loaded_syms;
+      loaded_syms = new;
+    }
+
+  return symp;
+}
+
+int
+load_file (const gmk_floc *flocp, const char **ldname, int noerror)
+{
+  int nmlen = strlen (*ldname);
+  char *new = alloca (nmlen + CSTRLEN (SYMBOL_EXTENSION) + 1);
+  char *symname = NULL;
+  char *loaded;
+  const char *fp;
+  int r;
+  load_func_t symp;
+
+  /* Break the input into an object file name and a symbol name.  If no symbol
+     name was provided, compute one from the object file name.  */
+  fp = strchr (*ldname, '(');
+  if (fp)
+    {
+      const char *ep;
+
+      /* There's an open paren, so see if there's a close paren: if so use
+         that as the symbol name.  We can't have whitespace: it would have
+         been chopped up before this function is called.  */
+      ep = strchr (fp+1, ')');
+      if (ep && ep[1] == '\0')
+        {
+          int l = fp - *ldname;;
+
+          ++fp;
+          if (fp == ep)
+            OS (fatal, flocp, _("Empty symbol name for load: %s"), *ldname);
+
+          /* Make a copy of the ldname part.  */
+          memcpy (new, *ldname, l);
+          new[l] = '\0';
+          *ldname = new;
+          nmlen = l;
+
+          /* Make a copy of the symbol name part.  */
+          symname = new + l + 1;
+          memcpy (symname, fp, ep - fp);
+          symname[ep - fp] = '\0';
+        }
+    }
+
+  /* Add this name to the string cache so it can be reused later.  */
+  *ldname = strcache_add (*ldname);
+
+  /* If this object has been loaded, we're done.  */
+  loaded = allocated_variable_expand ("$(.LOADED)");
+  fp = strstr (loaded, *ldname);
+  r = fp && (fp==loaded || fp[-1]==' ') && (fp[nmlen]=='\0' || fp[nmlen]==' ');
+  free (loaded);
+  if (r)
+    return 1;
+
+  /* If we didn't find a symbol name yet, construct it from the ldname.  */
+  if (! symname)
+    {
+      char *p = new;
+
+      fp = strrchr (*ldname, '/');
+#ifdef HAVE_DOS_PATHS
+      if (fp)
+        {
+          const char *fp2 = strchr (fp, '\\');
+
+          if (fp2 > fp)
+            fp = fp2;
+        }
+      else
+        fp = strrchr (*ldname, '\\');
+      /* The (improbable) case of d:foo.  */
+      if (fp && *fp && fp[1] == ':')
+        fp++;
+#endif
+      if (!fp)
+        fp = *ldname;
+      else
+        ++fp;
+      while (isalnum (*fp) || *fp == '_')
+        *(p++) = *(fp++);
+      strcpy (p, SYMBOL_EXTENSION);
+      symname = new;
+    }
+
+  DB (DB_VERBOSE, (_("Loading symbol %s from %s\n"), symname, *ldname));
+
+  /* Load it!  */
+  symp = load_object (flocp, noerror, *ldname, symname);
+  if (! symp)
+    return 0;
+
+  /* Invoke the symbol.  */
+  r = (*symp) (flocp);
+
+  /* If it succeeded, add the load file to the loaded variable.  */
+  if (r > 0)
+    do_variable_definition (flocp, ".LOADED", *ldname, o_default, f_append, 0);
+
+  return r;
+}
+
+void
+unload_file (const char *name)
+{
+  struct load_list *d;
+
+  for (d = loaded_syms; d != NULL; d = d->next)
+    if (streq (d->name, name) && d->dlp)
+      {
+        if (dlclose (d->dlp))
+          perror_with_name ("dlclose", d->name);
+        d->dlp = NULL;
+        break;
+      }
+}
+
+#else
+
+int
+load_file (const gmk_floc *flocp, const char **ldname, int noerror)
+{
+  if (! noerror)
+    O (fatal, flocp,
+       _("The 'load' operation is not supported on this platform."));
+
+  return 0;
+}
+
+void
+unload_file (const char *name)
+{
+  O (fatal, NILF, "INTERNAL: Cannot unload when load is not supported!");
+}
+
+#endif  /* MAKE_LOAD */
diff --git a/loadapi.c b/loadapi.c
new file mode 100644
index 0000000..fb275dd
--- /dev/null
+++ b/loadapi.c
@@ -0,0 +1,70 @@
+/* API for GNU Make dynamic objects.
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include "filedef.h"
+#include "variable.h"
+#include "dep.h"
+
+/* Allocate a buffer in our context, so we can free it.  */
+char *
+gmk_alloc (unsigned int len)
+{
+  return xmalloc (len);
+}
+
+/* Free a buffer returned by gmk_expand().  */
+void
+gmk_free (char *s)
+{
+  free (s);
+}
+
+/* Evaluate a buffer as make syntax.
+   Ideally eval_buffer() will take const char *, but not yet.  */
+void
+gmk_eval (const char *buffer, const gmk_floc *floc)
+{
+  /* Preserve existing variable buffer context.  */
+  char *pbuf;
+  unsigned int plen;
+  char *s;
+
+  install_variable_buffer (&pbuf, &plen);
+
+  s = xstrdup (buffer);
+  eval_buffer (s, floc);
+  free (s);
+
+  restore_variable_buffer (pbuf, plen);
+}
+
+/* Expand a string and return an allocated buffer.
+   Caller must call gmk_free() with this buffer.  */
+char *
+gmk_expand (const char *ref)
+{
+  return allocated_variable_expand (ref);
+}
+
+/* Register a function to be called from makefiles.  */
+void
+gmk_add_function (const char *name, gmk_func_ptr func,
+                  unsigned int min, unsigned int max, unsigned int flags)
+{
+  define_new_function (reading_file, name, min, max, flags, func);
+}
diff --git a/main.c b/main.c
new file mode 100644
index 0000000..7f14cba
--- /dev/null
+++ b/main.c
@@ -0,0 +1,3455 @@
+/* Argument parsing and main program of GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "dep.h"
+#include "variable.h"
+#include "job.h"
+#include "commands.h"
+#include "rule.h"
+#include "debug.h"
+#include "getopt.h"
+
+#include <assert.h>
+#ifdef _AMIGA
+# include <dos/dos.h>
+# include <proto/dos.h>
+#endif
+#ifdef WINDOWS32
+# include <windows.h>
+# include <io.h>
+# include "pathstuff.h"
+# include "sub_proc.h"
+# include "w32err.h"
+#endif
+#ifdef __EMX__
+# include <sys/types.h>
+# include <sys/wait.h>
+#endif
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+#endif
+
+#ifdef _AMIGA
+int __stack = 20000; /* Make sure we have 20K of stack space */
+#endif
+
+void init_dir (void);
+void remote_setup (void);
+void remote_cleanup (void);
+RETSIGTYPE fatal_error_signal (int sig);
+
+void print_variable_data_base (void);
+void print_dir_data_base (void);
+void print_rule_data_base (void);
+void print_vpath_data_base (void);
+
+void verify_file_data_base (void);
+
+#if defined HAVE_WAITPID || defined HAVE_WAIT3
+# define HAVE_WAIT_NOHANG
+#endif
+
+#ifndef HAVE_UNISTD_H
+int chdir ();
+#endif
+#ifndef STDC_HEADERS
+# ifndef sun                    /* Sun has an incorrect decl in a header.  */
+void exit (int) __attribute__ ((noreturn));
+# endif
+double atof ();
+#endif
+
+static void clean_jobserver (int status);
+static void print_data_base (void);
+static void print_version (void);
+static void decode_switches (int argc, const char **argv, int env);
+static void decode_env_switches (const char *envar, unsigned int len);
+static struct variable *define_makeflags (int all, int makefile);
+static char *quote_for_env (char *out, const char *in);
+static void initialize_global_hash_tables (void);
+
+
+/* The structure that describes an accepted command switch.  */
+
+struct command_switch
+  {
+    int c;                      /* The switch character.  */
+
+    enum                        /* Type of the value.  */
+      {
+        flag,                   /* Turn int flag on.  */
+        flag_off,               /* Turn int flag off.  */
+        string,                 /* One string per invocation.  */
+        strlist,                /* One string per switch.  */
+        filename,               /* A string containing a file name.  */
+        positive_int,           /* A positive integer.  */
+        floating,               /* A floating-point number (double).  */
+        ignore                  /* Ignored.  */
+      } type;
+
+    void *value_ptr;    /* Pointer to the value-holding variable.  */
+
+    unsigned int env:1;         /* Can come from MAKEFLAGS.  */
+    unsigned int toenv:1;       /* Should be put in MAKEFLAGS.  */
+    unsigned int no_makefile:1; /* Don't propagate when remaking makefiles.  */
+
+    const void *noarg_value;    /* Pointer to value used if no arg given.  */
+    const void *default_value;  /* Pointer to default value.  */
+
+    const char *long_name;      /* Long option name.  */
+  };
+
+/* True if C is a switch value that corresponds to a short option.  */
+
+#define short_option(c) ((c) <= CHAR_MAX)
+
+/* The structure used to hold the list of strings given
+   in command switches of a type that takes strlist arguments.  */
+
+struct stringlist
+  {
+    const char **list;  /* Nil-terminated list of strings.  */
+    unsigned int idx;   /* Index into above.  */
+    unsigned int max;   /* Number of pointers allocated.  */
+  };
+
+
+/* The recognized command switches.  */
+
+/* Nonzero means do extra verification (that may slow things down).  */
+
+int verify_flag;
+
+/* Nonzero means do not print commands to be executed (-s).  */
+
+int silent_flag;
+
+/* Nonzero means just touch the files
+   that would appear to need remaking (-t)  */
+
+int touch_flag;
+
+/* Nonzero means just print what commands would need to be executed,
+   don't actually execute them (-n).  */
+
+int just_print_flag;
+
+/* Print debugging info (--debug).  */
+
+static struct stringlist *db_flags = 0;
+static int debug_flag = 0;
+
+int db_level = 0;
+
+/* Synchronize output (--output-sync).  */
+
+char *output_sync_option = 0;
+
+#ifdef WINDOWS32
+/* Suspend make in main for a short time to allow debugger to attach */
+
+int suspend_flag = 0;
+#endif
+
+/* Environment variables override makefile definitions.  */
+
+int env_overrides = 0;
+
+/* Nonzero means ignore status codes returned by commands
+   executed to remake files.  Just treat them all as successful (-i).  */
+
+int ignore_errors_flag = 0;
+
+/* Nonzero means don't remake anything, just print the data base
+   that results from reading the makefile (-p).  */
+
+int print_data_base_flag = 0;
+
+/* Nonzero means don't remake anything; just return a nonzero status
+   if the specified targets are not up to date (-q).  */
+
+int question_flag = 0;
+
+/* Nonzero means do not use any of the builtin rules (-r) / variables (-R).  */
+
+int no_builtin_rules_flag = 0;
+int no_builtin_variables_flag = 0;
+
+/* Nonzero means keep going even if remaking some file fails (-k).  */
+
+int keep_going_flag;
+int default_keep_going_flag = 0;
+
+/* Nonzero means check symlink mtimes.  */
+
+int check_symlink_flag = 0;
+
+/* Nonzero means print directory before starting and when done (-w).  */
+
+int print_directory_flag = 0;
+
+/* Nonzero means ignore print_directory_flag and never print the directory.
+   This is necessary because print_directory_flag is set implicitly.  */
+
+int inhibit_print_directory_flag = 0;
+
+/* Nonzero means print version information.  */
+
+int print_version_flag = 0;
+
+/* List of makefiles given with -f switches.  */
+
+static struct stringlist *makefiles = 0;
+
+/* Size of the stack when we started.  */
+
+#ifdef SET_STACK_SIZE
+struct rlimit stack_limit;
+#endif
+
+
+/* Number of job slots (commands that can be run at once).  */
+
+unsigned int job_slots = 1;
+unsigned int default_job_slots = 1;
+static unsigned int master_job_slots = 0;
+
+/* Value of job_slots that means no limit.  */
+
+static unsigned int inf_jobs = 0;
+
+/* File descriptors for the jobs pipe.  */
+
+char *jobserver_fds = 0;
+
+int job_fds[2] = { -1, -1 };
+int job_rfd = -1;
+
+/* Handle for the mutex used on Windows to synchronize output of our
+   children under -O.  */
+
+char *sync_mutex = 0;
+
+/* Maximum load average at which multiple jobs will be run.
+   Negative values mean unlimited, while zero means limit to
+   zero load (which could be useful to start infinite jobs remotely
+   but one at a time locally).  */
+#ifndef NO_FLOAT
+double max_load_average = -1.0;
+double default_load_average = -1.0;
+#else
+int max_load_average = -1;
+int default_load_average = -1;
+#endif
+
+/* List of directories given with -C switches.  */
+
+static struct stringlist *directories = 0;
+
+/* List of include directories given with -I switches.  */
+
+static struct stringlist *include_directories = 0;
+
+/* List of files given with -o switches.  */
+
+static struct stringlist *old_files = 0;
+
+/* List of files given with -W switches.  */
+
+static struct stringlist *new_files = 0;
+
+/* List of strings to be eval'd.  */
+static struct stringlist *eval_strings = 0;
+
+/* If nonzero, we should just print usage and exit.  */
+
+static int print_usage_flag = 0;
+
+/* If nonzero, we should print a warning message
+   for each reference to an undefined variable.  */
+
+int warn_undefined_variables_flag;
+
+/* If nonzero, always build all targets, regardless of whether
+   they appear out of date or not.  */
+
+static int always_make_set = 0;
+int always_make_flag = 0;
+
+/* If nonzero, we're in the "try to rebuild makefiles" phase.  */
+
+int rebuilding_makefiles = 0;
+
+/* Remember the original value of the SHELL variable, from the environment.  */
+
+struct variable shell_var;
+
+/* This character introduces a command: it's the first char on the line.  */
+
+char cmd_prefix = '\t';
+
+
+/* The usage output.  We write it this way to make life easier for the
+   translators, especially those trying to translate to right-to-left
+   languages like Hebrew.  */
+
+static const char *const usage[] =
+  {
+    N_("Options:\n"),
+    N_("\
+  -b, -m                      Ignored for compatibility.\n"),
+    N_("\
+  -B, --always-make           Unconditionally make all targets.\n"),
+    N_("\
+  -C DIRECTORY, --directory=DIRECTORY\n\
+                              Change to DIRECTORY before doing anything.\n"),
+    N_("\
+  -d                          Print lots of debugging information.\n"),
+    N_("\
+  --debug[=FLAGS]             Print various types of debugging information.\n"),
+    N_("\
+  -e, --environment-overrides\n\
+                              Environment variables override makefiles.\n"),
+    N_("\
+  --eval=STRING               Evaluate STRING as a makefile statement.\n"),
+    N_("\
+  -f FILE, --file=FILE, --makefile=FILE\n\
+                              Read FILE as a makefile.\n"),
+    N_("\
+  -h, --help                  Print this message and exit.\n"),
+    N_("\
+  -i, --ignore-errors         Ignore errors from recipes.\n"),
+    N_("\
+  -I DIRECTORY, --include-dir=DIRECTORY\n\
+                              Search DIRECTORY for included makefiles.\n"),
+    N_("\
+  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no arg.\n"),
+    N_("\
+  -k, --keep-going            Keep going when some targets can't be made.\n"),
+    N_("\
+  -l [N], --load-average[=N], --max-load[=N]\n\
+                              Don't start multiple jobs unless load is below N.\n"),
+    N_("\
+  -L, --check-symlink-times   Use the latest mtime between symlinks and target.\n"),
+    N_("\
+  -n, --just-print, --dry-run, --recon\n\
+                              Don't actually run any recipe; just print them.\n"),
+    N_("\
+  -o FILE, --old-file=FILE, --assume-old=FILE\n\
+                              Consider FILE to be very old and don't remake it.\n"),
+    N_("\
+  -O[TYPE], --output-sync[=TYPE]\n\
+                              Synchronize output of parallel jobs by TYPE.\n"),
+    N_("\
+  -p, --print-data-base       Print make's internal database.\n"),
+    N_("\
+  -q, --question              Run no recipe; exit status says if up to date.\n"),
+    N_("\
+  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"),
+    N_("\
+  -R, --no-builtin-variables  Disable the built-in variable settings.\n"),
+    N_("\
+  -s, --silent, --quiet       Don't echo recipes.\n"),
+    N_("\
+  -S, --no-keep-going, --stop\n\
+                              Turns off -k.\n"),
+    N_("\
+  -t, --touch                 Touch targets instead of remaking them.\n"),
+    N_("\
+  --trace                     Print tracing information.\n"),
+    N_("\
+  -v, --version               Print the version number of make and exit.\n"),
+    N_("\
+  -w, --print-directory       Print the current directory.\n"),
+    N_("\
+  --no-print-directory        Turn off -w, even if it was turned on implicitly.\n"),
+    N_("\
+  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n\
+                              Consider FILE to be infinitely new.\n"),
+    N_("\
+  --warn-undefined-variables  Warn when an undefined variable is referenced.\n"),
+    NULL
+  };
+
+/* The table of command switches.
+   Order matters here: this is the order MAKEFLAGS will be constructed.
+   So be sure all simple flags (single char, no argument) come first.  */
+
+static const struct command_switch switches[] =
+  {
+    { 'b', ignore, 0, 0, 0, 0, 0, 0, 0 },
+    { 'B', flag, &always_make_set, 1, 1, 0, 0, 0, "always-make" },
+    { 'd', flag, &debug_flag, 1, 1, 0, 0, 0, 0 },
+#ifdef WINDOWS32
+    { 'D', flag, &suspend_flag, 1, 1, 0, 0, 0, "suspend-for-debug" },
+#endif
+    { 'e', flag, &env_overrides, 1, 1, 0, 0, 0, "environment-overrides", },
+    { 'h', flag, &print_usage_flag, 0, 0, 0, 0, 0, "help" },
+    { 'i', flag, &ignore_errors_flag, 1, 1, 0, 0, 0, "ignore-errors" },
+    { 'k', flag, &keep_going_flag, 1, 1, 0, 0, &default_keep_going_flag,
+      "keep-going" },
+    { 'L', flag, &check_symlink_flag, 1, 1, 0, 0, 0, "check-symlink-times" },
+    { 'm', ignore, 0, 0, 0, 0, 0, 0, 0 },
+    { 'n', flag, &just_print_flag, 1, 1, 1, 0, 0, "just-print" },
+    { 'p', flag, &print_data_base_flag, 1, 1, 0, 0, 0, "print-data-base" },
+    { 'q', flag, &question_flag, 1, 1, 1, 0, 0, "question" },
+    { 'r', flag, &no_builtin_rules_flag, 1, 1, 0, 0, 0, "no-builtin-rules" },
+    { 'R', flag, &no_builtin_variables_flag, 1, 1, 0, 0, 0,
+      "no-builtin-variables" },
+    { 's', flag, &silent_flag, 1, 1, 0, 0, 0, "silent" },
+    { 'S', flag_off, &keep_going_flag, 1, 1, 0, 0, &default_keep_going_flag,
+      "no-keep-going" },
+    { 't', flag, &touch_flag, 1, 1, 1, 0, 0, "touch" },
+    { 'v', flag, &print_version_flag, 1, 1, 0, 0, 0, "version" },
+    { 'w', flag, &print_directory_flag, 1, 1, 0, 0, 0, "print-directory" },
+
+    /* These options take arguments.  */
+    { 'C', filename, &directories, 0, 0, 0, 0, 0, "directory" },
+    { 'f', filename, &makefiles, 0, 0, 0, 0, 0, "file" },
+    { 'I', filename, &include_directories, 1, 1, 0, 0, 0,
+      "include-dir" },
+    { 'j', positive_int, &job_slots, 1, 1, 0, &inf_jobs, &default_job_slots,
+      "jobs" },
+#ifndef NO_FLOAT
+    { 'l', floating, &max_load_average, 1, 1, 0, &default_load_average,
+      &default_load_average, "load-average" },
+#else
+    { 'l', positive_int, &max_load_average, 1, 1, 0, &default_load_average,
+      &default_load_average, "load-average" },
+#endif
+    { 'o', filename, &old_files, 0, 0, 0, 0, 0, "old-file" },
+    { 'O', string, &output_sync_option, 1, 1, 0, "target", 0, "output-sync" },
+    { 'W', filename, &new_files, 0, 0, 0, 0, 0, "what-if" },
+
+    /* These are long-style options.  */
+    { CHAR_MAX+1, strlist, &db_flags, 1, 1, 0, "basic", 0, "debug" },
+    { CHAR_MAX+2, string, &jobserver_fds, 1, 1, 0, 0, 0, "jobserver-fds" },
+    { CHAR_MAX+3, flag, &trace_flag, 1, 1, 0, 0, 0, "trace" },
+    { CHAR_MAX+4, flag, &inhibit_print_directory_flag, 1, 1, 0, 0, 0,
+      "no-print-directory" },
+    { CHAR_MAX+5, flag, &warn_undefined_variables_flag, 1, 1, 0, 0, 0,
+      "warn-undefined-variables" },
+    { CHAR_MAX+6, strlist, &eval_strings, 1, 0, 0, 0, 0, "eval" },
+    { CHAR_MAX+7, string, &sync_mutex, 1, 1, 0, 0, 0, "sync-mutex" },
+    { 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+  };
+
+/* Secondary long names for options.  */
+
+static struct option long_option_aliases[] =
+  {
+    { "quiet",          no_argument,            0, 's' },
+    { "stop",           no_argument,            0, 'S' },
+    { "new-file",       required_argument,      0, 'W' },
+    { "assume-new",     required_argument,      0, 'W' },
+    { "assume-old",     required_argument,      0, 'o' },
+    { "max-load",       optional_argument,      0, 'l' },
+    { "dry-run",        no_argument,            0, 'n' },
+    { "recon",          no_argument,            0, 'n' },
+    { "makefile",       required_argument,      0, 'f' },
+  };
+
+/* List of goal targets.  */
+
+static struct dep *goals, *lastgoal;
+
+/* List of variables which were defined on the command line
+   (or, equivalently, in MAKEFLAGS).  */
+
+struct command_variable
+  {
+    struct command_variable *next;
+    struct variable *variable;
+  };
+static struct command_variable *command_variables;
+
+/* The name we were invoked with.  */
+
+#ifdef WINDOWS32
+/* On MS-Windows, we chop off the .exe suffix in 'main', so this
+   cannot be 'const'.  */
+char *program;
+#else
+const char *program;
+#endif
+
+/* Our current directory before processing any -C options.  */
+
+char *directory_before_chdir;
+
+/* Our current directory after processing all -C options.  */
+
+char *starting_directory;
+
+/* Value of the MAKELEVEL variable at startup (or 0).  */
+
+unsigned int makelevel;
+
+/* Pointer to the value of the .DEFAULT_GOAL special variable.
+   The value will be the name of the goal to remake if the command line
+   does not override it.  It can be set by the makefile, or else it's
+   the first target defined in the makefile whose name does not start
+   with '.'.  */
+
+struct variable * default_goal_var;
+
+/* Pointer to structure for the file .DEFAULT
+   whose commands are used for any file that has none of its own.
+   This is zero if the makefiles do not define .DEFAULT.  */
+
+struct file *default_file;
+
+/* Nonzero if we have seen the magic '.POSIX' target.
+   This turns on pedantic compliance with POSIX.2.  */
+
+int posix_pedantic;
+
+/* Nonzero if we have seen the '.SECONDEXPANSION' target.
+   This turns on secondary expansion of prerequisites.  */
+
+int second_expansion;
+
+/* Nonzero if we have seen the '.ONESHELL' target.
+   This causes the entire recipe to be handed to SHELL
+   as a single string, potentially containing newlines.  */
+
+int one_shell;
+
+/* One of OUTPUT_SYNC_* if the "--output-sync" option was given.  This
+   attempts to synchronize the output of parallel jobs such that the results
+   of each job stay together.  */
+
+int output_sync = OUTPUT_SYNC_NONE;
+
+/* Nonzero if the "--trace" option was given.  */
+
+int trace_flag = 0;
+
+/* Nonzero if we have seen the '.NOTPARALLEL' target.
+   This turns off parallel builds for this invocation of make.  */
+
+int not_parallel;
+
+/* Nonzero if some rule detected clock skew; we keep track so (a) we only
+   print one warning about it during the run, and (b) we can print a final
+   warning at the end of the run. */
+
+int clock_skew_detected;
+
+/* Map of possible stop characters for searching strings.  */
+#ifndef UCHAR_MAX
+# define UCHAR_MAX 255
+#endif
+unsigned short stopchar_map[UCHAR_MAX + 1] = {0};
+
+/* If output-sync is enabled we'll collect all the output generated due to
+   options, while reading makefiles, etc.  */
+
+struct output make_sync;
+
+
+/* Mask of signals that are being caught with fatal_error_signal.  */
+
+#ifdef  POSIX
+sigset_t fatal_signal_set;
+#else
+# ifdef HAVE_SIGSETMASK
+int fatal_signal_mask;
+# endif
+#endif
+
+#if !HAVE_DECL_BSD_SIGNAL && !defined bsd_signal
+# if !defined HAVE_SIGACTION
+#  define bsd_signal signal
+# else
+typedef RETSIGTYPE (*bsd_signal_ret_t) (int);
+
+static bsd_signal_ret_t
+bsd_signal (int sig, bsd_signal_ret_t func)
+{
+  struct sigaction act, oact;
+  act.sa_handler = func;
+  act.sa_flags = SA_RESTART;
+  sigemptyset (&act.sa_mask);
+  sigaddset (&act.sa_mask, sig);
+  if (sigaction (sig, &act, &oact) != 0)
+    return SIG_ERR;
+  return oact.sa_handler;
+}
+# endif
+#endif
+
+static void
+initialize_global_hash_tables (void)
+{
+  init_hash_global_variable_set ();
+  strcache_init ();
+  init_hash_files ();
+  hash_init_directories ();
+  hash_init_function_table ();
+}
+
+/* This character map locate stop chars when parsing GNU makefiles.
+   Each element is true if we should stop parsing on that character.  */
+
+static void
+initialize_stopchar_map ()
+{
+  int i;
+
+  stopchar_map[(int)'\0'] = MAP_NUL;
+  stopchar_map[(int)'#'] = MAP_COMMENT;
+  stopchar_map[(int)';'] = MAP_SEMI;
+  stopchar_map[(int)'='] = MAP_EQUALS;
+  stopchar_map[(int)':'] = MAP_COLON;
+  stopchar_map[(int)'%'] = MAP_PERCENT;
+  stopchar_map[(int)'|'] = MAP_PIPE;
+  stopchar_map[(int)'.'] = MAP_DOT | MAP_USERFUNC;
+  stopchar_map[(int)','] = MAP_COMMA;
+  stopchar_map[(int)'$'] = MAP_VARIABLE;
+
+  stopchar_map[(int)'-'] = MAP_USERFUNC;
+  stopchar_map[(int)'_'] = MAP_USERFUNC;
+
+  stopchar_map[(int)'/'] = MAP_DIRSEP;
+#if defined(VMS)
+  stopchar_map[(int)']'] = MAP_DIRSEP;
+#elif defined(HAVE_DOS_PATHS)
+  stopchar_map[(int)'\\'] = MAP_DIRSEP;
+#endif
+
+  for (i = 1; i <= UCHAR_MAX; ++i)
+    {
+      if (isblank(i))
+        stopchar_map[i] = MAP_BLANK;
+      if (isspace(i))
+        stopchar_map[i] |= MAP_SPACE;
+      if (isalnum(i))
+        stopchar_map[i] = MAP_USERFUNC;
+    }
+}
+
+static const char *
+expand_command_line_file (const char *name)
+{
+  const char *cp;
+  char *expanded = 0;
+
+  if (name[0] == '\0')
+    O (fatal, NILF, _("empty string invalid as file name"));
+
+  if (name[0] == '~')
+    {
+      expanded = tilde_expand (name);
+      if (expanded && expanded[0] != '\0')
+        name = expanded;
+    }
+
+  /* This is also done in parse_file_seq, so this is redundant
+     for names read from makefiles.  It is here for names passed
+     on the command line.  */
+  while (name[0] == '.' && name[1] == '/')
+    {
+      name += 2;
+      while (name[0] == '/')
+        /* Skip following slashes: ".//foo" is "foo", not "/foo".  */
+        ++name;
+    }
+
+  if (name[0] == '\0')
+    {
+      /* Nothing else but one or more "./", maybe plus slashes!  */
+      name = "./";
+    }
+
+  cp = strcache_add (name);
+
+  free (expanded);
+
+  return cp;
+}
+
+/* Toggle -d on receipt of SIGUSR1.  */
+
+#ifdef SIGUSR1
+static RETSIGTYPE
+debug_signal_handler (int sig UNUSED)
+{
+  db_level = db_level ? DB_NONE : DB_BASIC;
+}
+#endif
+
+static void
+decode_debug_flags (void)
+{
+  const char **pp;
+
+  if (debug_flag)
+    db_level = DB_ALL;
+
+  if (db_flags)
+    for (pp=db_flags->list; *pp; ++pp)
+      {
+        const char *p = *pp;
+
+        while (1)
+          {
+            switch (tolower (p[0]))
+              {
+              case 'a':
+                db_level |= DB_ALL;
+                break;
+              case 'b':
+                db_level |= DB_BASIC;
+                break;
+              case 'i':
+                db_level |= DB_BASIC | DB_IMPLICIT;
+                break;
+              case 'j':
+                db_level |= DB_JOBS;
+                break;
+              case 'm':
+                db_level |= DB_BASIC | DB_MAKEFILES;
+                break;
+              case 'n':
+                db_level = 0;
+                break;
+              case 'v':
+                db_level |= DB_BASIC | DB_VERBOSE;
+                break;
+              default:
+                OS (fatal, NILF,
+                    _("unknown debug level specification '%s'"), p);
+              }
+
+            while (*(++p) != '\0')
+              if (*p == ',' || *p == ' ')
+                {
+                  ++p;
+                  break;
+                }
+
+            if (*p == '\0')
+              break;
+          }
+      }
+
+  if (db_level)
+    verify_flag = 1;
+
+  if (! db_level)
+    debug_flag = 0;
+}
+
+static void
+decode_output_sync_flags (void)
+{
+  if (output_sync_option)
+    {
+      if (streq (output_sync_option, "none"))
+        output_sync = OUTPUT_SYNC_NONE;
+      else if (streq (output_sync_option, "line"))
+        output_sync = OUTPUT_SYNC_LINE;
+      else if (streq (output_sync_option, "target"))
+        output_sync = OUTPUT_SYNC_TARGET;
+      else if (streq (output_sync_option, "recurse"))
+        output_sync = OUTPUT_SYNC_RECURSE;
+      else
+        OS (fatal, NILF,
+            _("unknown output-sync type '%s'"), output_sync_option);
+    }
+
+  if (sync_mutex)
+    RECORD_SYNC_MUTEX (sync_mutex);
+}
+
+#ifdef WINDOWS32
+
+#ifndef NO_OUTPUT_SYNC
+
+/* This is called from start_job_command when it detects that
+   output_sync option is in effect.  The handle to the synchronization
+   mutex is passed, as a string, to sub-makes via the --sync-mutex
+   command-line argument.  */
+void
+prepare_mutex_handle_string (sync_handle_t handle)
+{
+  if (!sync_mutex)
+    {
+      /* Prepare the mutex handle string for our children.  */
+      /* 2 hex digits per byte + 2 characters for "0x" + null.  */
+      sync_mutex = xmalloc ((2 * sizeof (sync_handle_t)) + 2 + 1);
+      sprintf (sync_mutex, "0x%Ix", handle);
+      define_makeflags (1, 0);
+    }
+}
+
+#endif  /* NO_OUTPUT_SYNC */
+
+/*
+ * HANDLE runtime exceptions by avoiding a requestor on the GUI. Capture
+ * exception and print it to stderr instead.
+ *
+ * If ! DB_VERBOSE, just print a simple message and exit.
+ * If DB_VERBOSE, print a more verbose message.
+ * If compiled for DEBUG, let exception pass through to GUI so that
+ *   debuggers can attach.
+ */
+LONG WINAPI
+handle_runtime_exceptions (struct _EXCEPTION_POINTERS *exinfo)
+{
+  PEXCEPTION_RECORD exrec = exinfo->ExceptionRecord;
+  LPSTR cmdline = GetCommandLine ();
+  LPSTR prg = strtok (cmdline, " ");
+  CHAR errmsg[1024];
+#ifdef USE_EVENT_LOG
+  HANDLE hEventSource;
+  LPTSTR lpszStrings[1];
+#endif
+
+  if (! ISDB (DB_VERBOSE))
+    {
+      sprintf (errmsg,
+               _("%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"),
+               prg, exrec->ExceptionCode, exrec->ExceptionAddress);
+      fprintf (stderr, errmsg);
+      exit (255);
+    }
+
+  sprintf (errmsg,
+           _("\nUnhandled exception filter called from program %s\nExceptionCode = %lx\nExceptionFlags = %lx\nExceptionAddress = 0x%p\n"),
+           prg, exrec->ExceptionCode, exrec->ExceptionFlags,
+           exrec->ExceptionAddress);
+
+  if (exrec->ExceptionCode == EXCEPTION_ACCESS_VIOLATION
+      && exrec->NumberParameters >= 2)
+    sprintf (&errmsg[strlen(errmsg)],
+             (exrec->ExceptionInformation[0]
+              ? _("Access violation: write operation at address 0x%p\n")
+              : _("Access violation: read operation at address 0x%p\n")),
+             (PVOID)exrec->ExceptionInformation[1]);
+
+  /* turn this on if we want to put stuff in the event log too */
+#ifdef USE_EVENT_LOG
+  hEventSource = RegisterEventSource (NULL, "GNU Make");
+  lpszStrings[0] = errmsg;
+
+  if (hEventSource != NULL)
+    {
+      ReportEvent (hEventSource,         /* handle of event source */
+                   EVENTLOG_ERROR_TYPE,  /* event type */
+                   0,                    /* event category */
+                   0,                    /* event ID */
+                   NULL,                 /* current user's SID */
+                   1,                    /* strings in lpszStrings */
+                   0,                    /* no bytes of raw data */
+                   lpszStrings,          /* array of error strings */
+                   NULL);                /* no raw data */
+
+      (VOID) DeregisterEventSource (hEventSource);
+    }
+#endif
+
+  /* Write the error to stderr too */
+  fprintf (stderr, errmsg);
+
+#ifdef DEBUG
+  return EXCEPTION_CONTINUE_SEARCH;
+#else
+  exit (255);
+  return (255); /* not reached */
+#endif
+}
+
+/*
+ * On WIN32 systems we don't have the luxury of a /bin directory that
+ * is mapped globally to every drive mounted to the system. Since make could
+ * be invoked from any drive, and we don't want to propagate /bin/sh
+ * to every single drive. Allow ourselves a chance to search for
+ * a value for default shell here (if the default path does not exist).
+ */
+
+int
+find_and_set_default_shell (const char *token)
+{
+  int sh_found = 0;
+  char *atoken = 0;
+  const char *search_token;
+  const char *tokend;
+  PATH_VAR(sh_path);
+  extern const char *default_shell;
+
+  if (!token)
+    search_token = default_shell;
+  else
+    search_token = atoken = xstrdup (token);
+
+  /* If the user explicitly requests the DOS cmd shell, obey that request.
+     However, make sure that's what they really want by requiring the value
+     of SHELL either equal, or have a final path element of, "cmd" or
+     "cmd.exe" case-insensitive.  */
+  tokend = search_token + strlen (search_token) - 3;
+  if (((tokend == search_token
+        || (tokend > search_token
+            && (tokend[-1] == '/' || tokend[-1] == '\\')))
+       && !strcasecmp (tokend, "cmd"))
+      || ((tokend - 4 == search_token
+           || (tokend - 4 > search_token
+               && (tokend[-5] == '/' || tokend[-5] == '\\')))
+          && !strcasecmp (tokend - 4, "cmd.exe")))
+    {
+      batch_mode_shell = 1;
+      unixy_shell = 0;
+      sprintf (sh_path, "%s", search_token);
+      default_shell = xstrdup (w32ify (sh_path, 0));
+      DB (DB_VERBOSE, (_("find_and_set_shell() setting default_shell = %s\n"),
+                       default_shell));
+      sh_found = 1;
+    }
+  else if (!no_default_sh_exe
+           && (token == NULL || !strcmp (search_token, default_shell)))
+    {
+      /* no new information, path already set or known */
+      sh_found = 1;
+    }
+  else if (_access (search_token, 0) == 0)
+    {
+      /* search token path was found */
+      sprintf (sh_path, "%s", search_token);
+      default_shell = xstrdup (w32ify (sh_path, 0));
+      DB (DB_VERBOSE, (_("find_and_set_shell() setting default_shell = %s\n"),
+                       default_shell));
+      sh_found = 1;
+    }
+  else
+    {
+      char *p;
+      struct variable *v = lookup_variable (STRING_SIZE_TUPLE ("PATH"));
+
+      /* Search Path for shell */
+      if (v && v->value)
+        {
+          char *ep;
+
+          p  = v->value;
+          ep = strchr (p, PATH_SEPARATOR_CHAR);
+
+          while (ep && *ep)
+            {
+              *ep = '\0';
+
+              sprintf (sh_path, "%s/%s", p, search_token);
+              if (_access (sh_path, 0) == 0)
+                {
+                  default_shell = xstrdup (w32ify (sh_path, 0));
+                  sh_found = 1;
+                  *ep = PATH_SEPARATOR_CHAR;
+
+                  /* terminate loop */
+                  p += strlen (p);
+                }
+              else
+                {
+                  *ep = PATH_SEPARATOR_CHAR;
+                  p = ++ep;
+                }
+
+              ep = strchr (p, PATH_SEPARATOR_CHAR);
+            }
+
+          /* be sure to check last element of Path */
+          if (p && *p)
+            {
+              sprintf (sh_path, "%s/%s", p, search_token);
+              if (_access (sh_path, 0) == 0)
+                {
+                  default_shell = xstrdup (w32ify (sh_path, 0));
+                  sh_found = 1;
+                }
+            }
+
+          if (sh_found)
+            DB (DB_VERBOSE,
+                (_("find_and_set_shell() path search set default_shell = %s\n"),
+                 default_shell));
+        }
+    }
+
+  /* naive test */
+  if (!unixy_shell && sh_found
+      && (strstr (default_shell, "sh") || strstr (default_shell, "SH")))
+    {
+      unixy_shell = 1;
+      batch_mode_shell = 0;
+    }
+
+#ifdef BATCH_MODE_ONLY_SHELL
+  batch_mode_shell = 1;
+#endif
+
+  free (atoken);
+
+  return (sh_found);
+}
+#endif  /* WINDOWS32 */
+
+#ifdef __MSDOS__
+static void
+msdos_return_to_initial_directory (void)
+{
+  if (directory_before_chdir)
+    chdir (directory_before_chdir);
+}
+#endif  /* __MSDOS__ */
+
+#ifdef _AMIGA
+int
+main (int argc, char **argv)
+#else
+int
+main (int argc, char **argv, char **envp)
+#endif
+{
+  static char *stdin_nm = 0;
+  int makefile_status = MAKE_SUCCESS;
+  struct dep *read_files;
+  PATH_VAR (current_directory);
+  unsigned int restarts = 0;
+  unsigned int syncing = 0;
+#ifdef WINDOWS32
+  const char *unix_path = NULL;
+  const char *windows32_path = NULL;
+
+  SetUnhandledExceptionFilter (handle_runtime_exceptions);
+
+  /* start off assuming we have no shell */
+  unixy_shell = 0;
+  no_default_sh_exe = 1;
+#endif
+
+  output_init (&make_sync);
+
+  initialize_stopchar_map();
+
+#ifdef SET_STACK_SIZE
+ /* Get rid of any avoidable limit on stack size.  */
+  {
+    struct rlimit rlim;
+
+    /* Set the stack limit huge so that alloca does not fail.  */
+    if (getrlimit (RLIMIT_STACK, &rlim) == 0
+        && rlim.rlim_cur > 0 && rlim.rlim_cur < rlim.rlim_max)
+      {
+        stack_limit = rlim;
+        rlim.rlim_cur = rlim.rlim_max;
+        setrlimit (RLIMIT_STACK, &rlim);
+      }
+    else
+      stack_limit.rlim_cur = 0;
+  }
+#endif
+
+  /* Needed for OS/2 */
+  initialize_main (&argc, &argv);
+
+#ifdef MAKE_MAINTAINER_MODE
+  /* In maintainer mode we always enable verification.  */
+  verify_flag = 1;
+#endif
+
+#if defined (__MSDOS__) && !defined (_POSIX_SOURCE)
+  /* Request the most powerful version of 'system', to
+     make up for the dumb default shell.  */
+  __system_flags = (__system_redirect
+                    | __system_use_shell
+                    | __system_allow_multiple_cmds
+                    | __system_allow_long_cmds
+                    | __system_handle_null_commands
+                    | __system_emulate_chdir);
+
+#endif
+
+  /* Set up gettext/internationalization support.  */
+  setlocale (LC_ALL, "");
+  /* The cast to void shuts up compiler warnings on systems that
+     disable NLS.  */
+  (void)bindtextdomain (PACKAGE, LOCALEDIR);
+  (void)textdomain (PACKAGE);
+
+#ifdef  POSIX
+  sigemptyset (&fatal_signal_set);
+#define ADD_SIG(sig)    sigaddset (&fatal_signal_set, sig)
+#else
+#ifdef  HAVE_SIGSETMASK
+  fatal_signal_mask = 0;
+#define ADD_SIG(sig)    fatal_signal_mask |= sigmask (sig)
+#else
+#define ADD_SIG(sig)    (void)sig
+#endif
+#endif
+
+#define FATAL_SIG(sig)                                                        \
+  if (bsd_signal (sig, fatal_error_signal) == SIG_IGN)                        \
+    bsd_signal (sig, SIG_IGN);                                                \
+  else                                                                        \
+    ADD_SIG (sig);
+
+#ifdef SIGHUP
+  FATAL_SIG (SIGHUP);
+#endif
+#ifdef SIGQUIT
+  FATAL_SIG (SIGQUIT);
+#endif
+  FATAL_SIG (SIGINT);
+  FATAL_SIG (SIGTERM);
+
+#ifdef __MSDOS__
+  /* Windows 9X delivers FP exceptions in child programs to their
+     parent!  We don't want Make to die when a child divides by zero,
+     so we work around that lossage by catching SIGFPE.  */
+  FATAL_SIG (SIGFPE);
+#endif
+
+#ifdef  SIGDANGER
+  FATAL_SIG (SIGDANGER);
+#endif
+#ifdef SIGXCPU
+  FATAL_SIG (SIGXCPU);
+#endif
+#ifdef SIGXFSZ
+  FATAL_SIG (SIGXFSZ);
+#endif
+
+#undef  FATAL_SIG
+
+  /* Do not ignore the child-death signal.  This must be done before
+     any children could possibly be created; otherwise, the wait
+     functions won't work on systems with the SVR4 ECHILD brain
+     damage, if our invoker is ignoring this signal.  */
+
+#ifdef HAVE_WAIT_NOHANG
+# if defined SIGCHLD
+  (void) bsd_signal (SIGCHLD, SIG_DFL);
+# endif
+# if defined SIGCLD && SIGCLD != SIGCHLD
+  (void) bsd_signal (SIGCLD, SIG_DFL);
+# endif
+#endif
+
+  output_init (NULL);
+
+  /* Figure out where this program lives.  */
+
+  if (argv[0] == 0)
+    argv[0] = (char *)"";
+  if (argv[0][0] == '\0')
+    program = "make";
+  else
+    {
+      program = strrchr (argv[0], '/');
+#if defined(__MSDOS__) || defined(__EMX__)
+      if (program == 0)
+        program = strrchr (argv[0], '\\');
+      else
+        {
+          /* Some weird environments might pass us argv[0] with
+             both kinds of slashes; we must find the rightmost.  */
+          char *p = strrchr (argv[0], '\\');
+          if (p && p > program)
+            program = p;
+        }
+      if (program == 0 && argv[0][1] == ':')
+        program = argv[0] + 1;
+#endif
+#ifdef WINDOWS32
+      if (program == 0)
+        {
+          /* Extract program from full path */
+          program = strrchr (argv[0], '\\');
+          if (program)
+            {
+              int argv0_len = strlen (program);
+              if (argv0_len > 4 && streq (&program[argv0_len - 4], ".exe"))
+                /* Remove .exe extension */
+                program[argv0_len - 4] = '\0';
+            }
+        }
+#endif
+      if (program == 0)
+#ifdef VMS
+        program = vms_progname(argv[0]);
+#else
+        program = argv[0];
+#endif
+      else
+        ++program;
+    }
+
+  /* Set up to access user data (files).  */
+  user_access ();
+
+  initialize_global_hash_tables ();
+
+  /* Figure out where we are.  */
+
+#ifdef WINDOWS32
+  if (getcwd_fs (current_directory, GET_PATH_MAX) == 0)
+#else
+  if (getcwd (current_directory, GET_PATH_MAX) == 0)
+#endif
+    {
+#ifdef  HAVE_GETCWD
+      perror_with_name ("getcwd", "");
+#else
+      OS (error, NILF, "getwd: %s", current_directory);
+#endif
+      current_directory[0] = '\0';
+      directory_before_chdir = 0;
+    }
+  else
+    directory_before_chdir = xstrdup (current_directory);
+
+#ifdef  __MSDOS__
+  /* Make sure we will return to the initial directory, come what may.  */
+  atexit (msdos_return_to_initial_directory);
+#endif
+
+  /* Initialize the special variables.  */
+  define_variable_cname (".VARIABLES", "", o_default, 0)->special = 1;
+  /* define_variable_cname (".TARGETS", "", o_default, 0)->special = 1; */
+  define_variable_cname (".RECIPEPREFIX", "", o_default, 0)->special = 1;
+  define_variable_cname (".SHELLFLAGS", "-c", o_default, 0);
+
+  /* Set up .FEATURES
+     Use a separate variable because define_variable_cname() is a macro and
+     some compilers (MSVC) don't like conditionals in macros.  */
+  {
+    const char *features = "target-specific order-only second-expansion"
+                           " else-if shortest-stem undefine oneshell"
+#ifndef NO_ARCHIVES
+                           " archives"
+#endif
+#ifdef MAKE_JOBSERVER
+                           " jobserver"
+#endif
+#ifndef NO_OUTPUT_SYNC
+                           " output-sync"
+#endif
+#ifdef MAKE_SYMLINKS
+                           " check-symlink"
+#endif
+#ifdef HAVE_GUILE
+                           " guile"
+#endif
+#ifdef MAKE_LOAD
+                           " load"
+#endif
+                           ;
+
+    define_variable_cname (".FEATURES", features, o_default, 0);
+  }
+
+  /* Configure GNU Guile support */
+  guile_gmake_setup (NILF);
+
+  /* Read in variables from the environment.  It is important that this be
+     done before $(MAKE) is figured out so its definitions will not be
+     from the environment.  */
+
+#ifndef _AMIGA
+  {
+    unsigned int i;
+
+    for (i = 0; envp[i] != 0; ++i)
+      {
+        struct variable *v;
+        const char *ep = envp[i];
+        /* By default, export all variables culled from the environment.  */
+        enum variable_export export = v_export;
+        unsigned int len;
+
+        while (! STOP_SET (*ep, MAP_EQUALS))
+          ++ep;
+
+        /* If there's no equals sign it's a malformed environment.  Ignore.  */
+        if (*ep == '\0')
+          continue;
+
+#ifdef WINDOWS32
+        if (!unix_path && strneq (envp[i], "PATH=", 5))
+          unix_path = ep+1;
+        else if (!strnicmp (envp[i], "Path=", 5))
+          {
+            if (!windows32_path)
+              windows32_path = ep+1;
+            /* PATH gets defined after the loop exits.  */
+            continue;
+          }
+#endif
+
+        /* Length of the variable name, and skip the '='.  */
+        len = ep++ - envp[i];
+
+        /* If this is MAKE_RESTARTS, check to see if the "already printed
+           the enter statement" flag is set.  */
+        if (len == 13 && strneq (envp[i], "MAKE_RESTARTS", 13))
+          {
+            if (*ep == '-')
+              {
+                OUTPUT_TRACED ();
+                ++ep;
+              }
+            restarts = (unsigned int) atoi (ep);
+            export = v_noexport;
+          }
+
+        v = define_variable (envp[i], len, ep, o_env, 1);
+
+        /* POSIX says the value of SHELL set in the makefile won't change the
+           value of SHELL given to subprocesses.  */
+        if (streq (v->name, "SHELL"))
+          {
+#ifndef __MSDOS__
+            export = v_noexport;
+#endif
+            shell_var.name = xstrdup ("SHELL");
+            shell_var.length = 5;
+            shell_var.value = xstrdup (ep);
+          }
+
+        v->export = export;
+      }
+  }
+#ifdef WINDOWS32
+    /* If we didn't find a correctly spelled PATH we define PATH as
+     * either the first misspelled value or an empty string
+     */
+    if (!unix_path)
+      define_variable_cname ("PATH", windows32_path ? windows32_path : "",
+                             o_env, 1)->export = v_export;
+#endif
+#else /* For Amiga, read the ENV: device, ignoring all dirs */
+    {
+        BPTR env, file, old;
+        char buffer[1024];
+        int len;
+        __aligned struct FileInfoBlock fib;
+
+        env = Lock ("ENV:", ACCESS_READ);
+        if (env)
+          {
+            old = CurrentDir (DupLock (env));
+            Examine (env, &fib);
+
+            while (ExNext (env, &fib))
+              {
+                if (fib.fib_DirEntryType < 0) /* File */
+                  {
+                    /* Define an empty variable. It will be filled in
+                       variable_lookup(). Makes startup quite a bit faster. */
+                    define_variable (fib.fib_FileName,
+                                     strlen (fib.fib_FileName),
+                                     "", o_env, 1)->export = v_export;
+                  }
+              }
+            UnLock (env);
+            UnLock (CurrentDir (old));
+          }
+    }
+#endif
+
+  /* Decode the switches.  */
+  decode_env_switches (STRING_SIZE_TUPLE ("GNUMAKEFLAGS"));
+
+  /* Clear GNUMAKEFLAGS to avoid duplication.  */
+  define_variable_cname ("GNUMAKEFLAGS", "", o_env, 0);
+
+  decode_env_switches (STRING_SIZE_TUPLE ("MAKEFLAGS"));
+
+  /* In output sync mode we need to sync any output generated by reading the
+     makefiles, such as in $(info ...) or stderr from $(shell ...) etc.  */
+
+  syncing = make_sync.syncout = (output_sync == OUTPUT_SYNC_LINE
+                                 || output_sync == OUTPUT_SYNC_TARGET);
+  OUTPUT_SET (&make_sync);
+
+#if 0
+  /* People write things like:
+        MFLAGS="CC=gcc -pipe" "CFLAGS=-g"
+     and we set the -p, -i and -e switches.  Doesn't seem quite right.  */
+  decode_env_switches (STRING_SIZE_TUPLE ("MFLAGS"));
+#endif
+
+  decode_switches (argc, (const char **)argv, 0);
+
+    /* Set a variable specifying whether stdout/stdin is hooked to a TTY.  */
+#ifdef HAVE_ISATTY
+    if (isatty (fileno (stdout)))
+      if (! lookup_variable (STRING_SIZE_TUPLE ("MAKE_TERMOUT")))
+        define_variable_cname ("MAKE_TERMOUT", TTYNAME (fileno (stdout)),
+                               o_default, 0)->export = v_export;
+
+    if (isatty (fileno (stderr)))
+      if (! lookup_variable (STRING_SIZE_TUPLE ("MAKE_TERMERR")))
+        define_variable_cname ("MAKE_TERMERR", TTYNAME (fileno (stderr)),
+                               o_default, 0)->export = v_export;
+#endif
+
+  /* Reset in case the switches changed our minds.  */
+  syncing = (output_sync == OUTPUT_SYNC_LINE
+             || output_sync == OUTPUT_SYNC_TARGET);
+
+  if (make_sync.syncout && ! syncing)
+    output_close (&make_sync);
+
+  make_sync.syncout = syncing;
+  OUTPUT_SET (&make_sync);
+
+  /* Figure out the level of recursion.  */
+  {
+    struct variable *v = lookup_variable (STRING_SIZE_TUPLE (MAKELEVEL_NAME));
+    if (v && v->value[0] != '\0' && v->value[0] != '-')
+      makelevel = (unsigned int) atoi (v->value);
+    else
+      makelevel = 0;
+  }
+
+#ifdef WINDOWS32
+  if (suspend_flag)
+    {
+      fprintf (stderr, "%s (pid = %ld)\n", argv[0], GetCurrentProcessId ());
+      fprintf (stderr, _("%s is suspending for 30 seconds..."), argv[0]);
+      Sleep (30 * 1000);
+      fprintf (stderr, _("done sleep(30). Continuing.\n"));
+    }
+#endif
+
+  /* Set always_make_flag if -B was given and we've not restarted already.  */
+  always_make_flag = always_make_set && (restarts == 0);
+
+  /* Print version information, and exit.  */
+  if (print_version_flag)
+    {
+      print_version ();
+      die (MAKE_SUCCESS);
+    }
+
+  if (ISDB (DB_BASIC))
+    print_version ();
+
+#ifndef VMS
+  /* Set the "MAKE_COMMAND" variable to the name we were invoked with.
+     (If it is a relative pathname with a slash, prepend our directory name
+     so the result will run the same program regardless of the current dir.
+     If it is a name with no slash, we can only hope that PATH did not
+     find it in the current directory.)  */
+#ifdef WINDOWS32
+  /*
+   * Convert from backslashes to forward slashes for
+   * programs like sh which don't like them. Shouldn't
+   * matter if the path is one way or the other for
+   * CreateProcess().
+   */
+  if (strpbrk (argv[0], "/:\\") || strstr (argv[0], "..")
+      || strneq (argv[0], "//", 2))
+    argv[0] = xstrdup (w32ify (argv[0], 1));
+#else /* WINDOWS32 */
+#if defined (__MSDOS__) || defined (__EMX__)
+  if (strchr (argv[0], '\\'))
+    {
+      char *p;
+
+      argv[0] = xstrdup (argv[0]);
+      for (p = argv[0]; *p; p++)
+        if (*p == '\\')
+          *p = '/';
+    }
+  /* If argv[0] is not in absolute form, prepend the current
+     directory.  This can happen when Make is invoked by another DJGPP
+     program that uses a non-absolute name.  */
+  if (current_directory[0] != '\0'
+      && argv[0] != 0
+      && (argv[0][0] != '/' && (argv[0][0] == '\0' || argv[0][1] != ':'))
+# ifdef __EMX__
+      /* do not prepend cwd if argv[0] contains no '/', e.g. "make" */
+      && (strchr (argv[0], '/') != 0 || strchr (argv[0], '\\') != 0)
+# endif
+      )
+    argv[0] = xstrdup (concat (3, current_directory, "/", argv[0]));
+#else  /* !__MSDOS__ */
+  if (current_directory[0] != '\0'
+      && argv[0] != 0 && argv[0][0] != '/' && strchr (argv[0], '/') != 0
+#ifdef HAVE_DOS_PATHS
+      && (argv[0][0] != '\\' && (!argv[0][0] || argv[0][1] != ':'))
+      && strchr (argv[0], '\\') != 0
+#endif
+      )
+    argv[0] = xstrdup (concat (3, current_directory, "/", argv[0]));
+#endif /* !__MSDOS__ */
+#endif /* WINDOWS32 */
+#endif
+
+  /* We may move, but until we do, here we are.  */
+  starting_directory = current_directory;
+
+#ifdef MAKE_JOBSERVER
+  /* If the jobserver-fds option is seen, make sure that -j is reasonable.
+     This can't be usefully set in the makefile, and we want to verify the
+     FDs are valid before any other aspect of make has a chance to start
+     using them for something else.  */
+
+  if (jobserver_fds)
+    {
+      /* Make sure the jobserver option has the proper format.  */
+      const char *cp = jobserver_fds;
+
+#ifdef WINDOWS32
+      if (! open_jobserver_semaphore (cp))
+        {
+          DWORD err = GetLastError ();
+          const char *estr = map_windows32_error_to_string (err);
+          fatal (NILF, strlen (cp) + INTSTR_LENGTH + strlen (estr),
+                 _("internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"),
+                 cp, err, estr);
+        }
+      DB (DB_JOBS, (_("Jobserver client (semaphore %s)\n"), cp));
+#else
+      if (sscanf (cp, "%d,%d", &job_fds[0], &job_fds[1]) != 2)
+        OS (fatal, NILF,
+            _("internal error: invalid --jobserver-fds string '%s'"), cp);
+
+      DB (DB_JOBS,
+          (_("Jobserver client (fds %d,%d)\n"), job_fds[0], job_fds[1]));
+#endif
+
+      /* The combination of a pipe + !job_slots means we're using the
+         jobserver.  If !job_slots and we don't have a pipe, we can start
+         infinite jobs.  If we see both a pipe and job_slots >0 that means the
+         user set -j explicitly.  This is broken; in this case obey the user
+         (ignore the jobserver pipe for this make) but print a message.
+         If we've restarted, we already printed this the first time.  */
+
+      if (job_slots > 0)
+        {
+          if (! restarts)
+            O (error, NILF,
+               _("warning: -jN forced in submake: disabling jobserver mode."));
+        }
+#ifndef WINDOWS32
+#ifdef HAVE_FCNTL
+# define FD_OK(_f) ((fcntl ((_f), F_GETFD) != -1) || (errno != EBADF))
+#else
+# define FD_OK(_f) 1
+#endif
+      /* Create a duplicate pipe, that will be closed in the SIGCHLD
+         handler.  If this fails with EBADF, the parent has closed the pipe
+         on us because it didn't think we were a submake.  If so, print a
+         warning then default to -j1.  */
+      else if (!FD_OK (job_fds[0]) || !FD_OK (job_fds[1])
+               || (job_rfd = dup (job_fds[0])) < 0)
+        {
+          if (errno != EBADF)
+            pfatal_with_name (_("dup jobserver"));
+
+          O (error, NILF,
+             _("warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."));
+          job_slots = 1;
+          job_fds[0] = job_fds[1] = -1;
+        }
+#endif
+
+      if (job_slots > 0)
+        {
+#ifdef WINDOWS32
+          free_jobserver_semaphore ();
+#else
+          if (job_fds[0] >= 0)
+            close (job_fds[0]);
+          if (job_fds[1] >= 0)
+            close (job_fds[1]);
+#endif
+          job_fds[0] = job_fds[1] = -1;
+
+          free (jobserver_fds);
+          jobserver_fds = 0;
+        }
+    }
+#endif
+
+  /* The extra indirection through $(MAKE_COMMAND) is done
+     for hysterical raisins.  */
+#ifdef VMS
+  define_variable_cname("MAKE_COMMAND", vms_command(argv[0]), o_default, 0);
+#else
+  define_variable_cname ("MAKE_COMMAND", argv[0], o_default, 0);
+#endif
+  define_variable_cname ("MAKE", "$(MAKE_COMMAND)", o_default, 1);
+
+  if (command_variables != 0)
+    {
+      struct command_variable *cv;
+      struct variable *v;
+      unsigned int len = 0;
+      char *value, *p;
+
+      /* Figure out how much space will be taken up by the command-line
+         variable definitions.  */
+      for (cv = command_variables; cv != 0; cv = cv->next)
+        {
+          v = cv->variable;
+          len += 2 * strlen (v->name);
+          if (! v->recursive)
+            ++len;
+          ++len;
+          len += 2 * strlen (v->value);
+          ++len;
+        }
+
+      /* Now allocate a buffer big enough and fill it.  */
+      p = value = alloca (len);
+      for (cv = command_variables; cv != 0; cv = cv->next)
+        {
+          v = cv->variable;
+          p = quote_for_env (p, v->name);
+          if (! v->recursive)
+            *p++ = ':';
+          *p++ = '=';
+          p = quote_for_env (p, v->value);
+          *p++ = ' ';
+        }
+      p[-1] = '\0';             /* Kill the final space and terminate.  */
+
+      /* Define an unchangeable variable with a name that no POSIX.2
+         makefile could validly use for its own variable.  */
+      define_variable_cname ("-*-command-variables-*-", value, o_automatic, 0);
+
+      /* Define the variable; this will not override any user definition.
+         Normally a reference to this variable is written into the value of
+         MAKEFLAGS, allowing the user to override this value to affect the
+         exported value of MAKEFLAGS.  In POSIX-pedantic mode, we cannot
+         allow the user's setting of MAKEOVERRIDES to affect MAKEFLAGS, so
+         a reference to this hidden variable is written instead. */
+      define_variable_cname ("MAKEOVERRIDES", "${-*-command-variables-*-}",
+                             o_env, 1);
+    }
+
+  /* If there were -C flags, move ourselves about.  */
+  if (directories != 0)
+    {
+      unsigned int i;
+      for (i = 0; directories->list[i] != 0; ++i)
+        {
+          const char *dir = directories->list[i];
+#ifdef WINDOWS32
+          /* WINDOWS32 chdir() doesn't work if the directory has a trailing '/'
+             But allow -C/ just in case someone wants that.  */
+          {
+            char *p = (char *)dir + strlen (dir) - 1;
+            while (p > dir && (p[0] == '/' || p[0] == '\\'))
+              --p;
+            p[1] = '\0';
+          }
+#endif
+          if (chdir (dir) < 0)
+            pfatal_with_name (dir);
+        }
+    }
+
+#ifdef WINDOWS32
+  /*
+   * THIS BLOCK OF CODE MUST COME AFTER chdir() CALL ABOVE IN ORDER
+   * TO NOT CONFUSE THE DEPENDENCY CHECKING CODE IN implicit.c.
+   *
+   * The functions in dir.c can incorrectly cache information for "."
+   * before we have changed directory and this can cause file
+   * lookups to fail because the current directory (.) was pointing
+   * at the wrong place when it was first evaluated.
+   */
+   no_default_sh_exe = !find_and_set_default_shell (NULL);
+#endif /* WINDOWS32 */
+
+  /* Except under -s, always do -w in sub-makes and under -C.  */
+  if (!silent_flag && (directories != 0 || makelevel > 0))
+    print_directory_flag = 1;
+
+  /* Let the user disable that with --no-print-directory.  */
+  if (inhibit_print_directory_flag)
+    print_directory_flag = 0;
+
+  /* If -R was given, set -r too (doesn't make sense otherwise!)  */
+  if (no_builtin_variables_flag)
+    no_builtin_rules_flag = 1;
+
+  /* Construct the list of include directories to search.  */
+
+  construct_include_path (include_directories == 0
+                          ? 0 : include_directories->list);
+
+  /* If we chdir'ed, figure out where we are now.  */
+  if (directories)
+    {
+#ifdef WINDOWS32
+      if (getcwd_fs (current_directory, GET_PATH_MAX) == 0)
+#else
+      if (getcwd (current_directory, GET_PATH_MAX) == 0)
+#endif
+        {
+#ifdef  HAVE_GETCWD
+          perror_with_name ("getcwd", "");
+#else
+          OS (error, NILF, "getwd: %s", current_directory);
+#endif
+          starting_directory = 0;
+        }
+      else
+        starting_directory = current_directory;
+    }
+
+  define_variable_cname ("CURDIR", current_directory, o_file, 0);
+
+  /* Read any stdin makefiles into temporary files.  */
+
+  if (makefiles != 0)
+    {
+      unsigned int i;
+      for (i = 0; i < makefiles->idx; ++i)
+        if (makefiles->list[i][0] == '-' && makefiles->list[i][1] == '\0')
+          {
+            /* This makefile is standard input.  Since we may re-exec
+               and thus re-read the makefiles, we read standard input
+               into a temporary file and read from that.  */
+            FILE *outfile;
+            char *template;
+            const char *tmpdir;
+
+            if (stdin_nm)
+              O (fatal, NILF,
+                 _("Makefile from standard input specified twice."));
+
+#ifdef VMS
+# define DEFAULT_TMPDIR     "sys$scratch:"
+#else
+# ifdef P_tmpdir
+#  define DEFAULT_TMPDIR    P_tmpdir
+# else
+#  define DEFAULT_TMPDIR    "/tmp"
+# endif
+#endif
+#define DEFAULT_TMPFILE     "GmXXXXXX"
+
+            if (((tmpdir = getenv ("TMPDIR")) == NULL || *tmpdir == '\0')
+#if defined (__MSDOS__) || defined (WINDOWS32) || defined (__EMX__)
+                /* These are also used commonly on these platforms.  */
+                && ((tmpdir = getenv ("TEMP")) == NULL || *tmpdir == '\0')
+                && ((tmpdir = getenv ("TMP")) == NULL || *tmpdir == '\0')
+#endif
+               )
+              tmpdir = DEFAULT_TMPDIR;
+
+            template = alloca (strlen (tmpdir) + CSTRLEN (DEFAULT_TMPFILE) + 2);
+            strcpy (template, tmpdir);
+
+#ifdef HAVE_DOS_PATHS
+            if (strchr ("/\\", template[strlen (template) - 1]) == NULL)
+              strcat (template, "/");
+#else
+# ifndef VMS
+            if (template[strlen (template) - 1] != '/')
+              strcat (template, "/");
+# endif /* !VMS */
+#endif /* !HAVE_DOS_PATHS */
+
+            strcat (template, DEFAULT_TMPFILE);
+            outfile = output_tmpfile (&stdin_nm, template);
+            if (outfile == 0)
+              pfatal_with_name (_("fopen (temporary file)"));
+            while (!feof (stdin) && ! ferror (stdin))
+              {
+                char buf[2048];
+                unsigned int n = fread (buf, 1, sizeof (buf), stdin);
+                if (n > 0 && fwrite (buf, 1, n, outfile) != n)
+                  pfatal_with_name (_("fwrite (temporary file)"));
+              }
+            fclose (outfile);
+
+            /* Replace the name that read_all_makefiles will
+               see with the name of the temporary file.  */
+            makefiles->list[i] = strcache_add (stdin_nm);
+
+            /* Make sure the temporary file will not be remade.  */
+            {
+              struct file *f = enter_file (strcache_add (stdin_nm));
+              f->updated = 1;
+              f->update_status = us_success;
+              f->command_state = cs_finished;
+              /* Can't be intermediate, or it'll be removed too early for
+                 make re-exec.  */
+              f->intermediate = 0;
+              f->dontcare = 0;
+            }
+          }
+    }
+
+#ifndef __EMX__ /* Don't use a SIGCHLD handler for OS/2 */
+#if defined(MAKE_JOBSERVER) || !defined(HAVE_WAIT_NOHANG)
+  /* Set up to handle children dying.  This must be done before
+     reading in the makefiles so that 'shell' function calls will work.
+
+     If we don't have a hanging wait we have to fall back to old, broken
+     functionality here and rely on the signal handler and counting
+     children.
+
+     If we're using the jobs pipe we need a signal handler so that
+     SIGCHLD is not ignored; we need it to interrupt the read(2) of the
+     jobserver pipe in job.c if we're waiting for a token.
+
+     If none of these are true, we don't need a signal handler at all.  */
+  {
+    RETSIGTYPE child_handler (int sig);
+# if defined SIGCHLD
+    bsd_signal (SIGCHLD, child_handler);
+# endif
+# if defined SIGCLD && SIGCLD != SIGCHLD
+    bsd_signal (SIGCLD, child_handler);
+# endif
+  }
+#endif
+#endif
+
+  /* Let the user send us SIGUSR1 to toggle the -d flag during the run.  */
+#ifdef SIGUSR1
+  bsd_signal (SIGUSR1, debug_signal_handler);
+#endif
+
+  /* Define the initial list of suffixes for old-style rules.  */
+  set_default_suffixes ();
+
+  /* Define the file rules for the built-in suffix rules.  These will later
+     be converted into pattern rules.  We used to do this in
+     install_default_implicit_rules, but since that happens after reading
+     makefiles, it results in the built-in pattern rules taking precedence
+     over makefile-specified suffix rules, which is wrong.  */
+  install_default_suffix_rules ();
+
+  /* Define some internal and special variables.  */
+  define_automatic_variables ();
+
+  /* Set up the MAKEFLAGS and MFLAGS variables for makefiles to see.
+     Initialize it to be exported but allow the makefile to reset it.  */
+  define_makeflags (0, 0)->export = v_export;
+
+  /* Define the default variables.  */
+  define_default_variables ();
+
+  default_file = enter_file (strcache_add (".DEFAULT"));
+
+  default_goal_var = define_variable_cname (".DEFAULT_GOAL", "", o_file, 0);
+
+  /* Evaluate all strings provided with --eval.
+     Also set up the $(-*-eval-flags-*-) variable.  */
+
+  if (eval_strings)
+    {
+      char *p, *value;
+      unsigned int i;
+      unsigned int len = (CSTRLEN ("--eval=") + 1) * eval_strings->idx;
+
+      for (i = 0; i < eval_strings->idx; ++i)
+        {
+          p = xstrdup (eval_strings->list[i]);
+          len += 2 * strlen (p);
+          eval_buffer (p, NULL);
+          free (p);
+        }
+
+      p = value = alloca (len);
+      for (i = 0; i < eval_strings->idx; ++i)
+        {
+          strcpy (p, "--eval=");
+          p += CSTRLEN ("--eval=");
+          p = quote_for_env (p, eval_strings->list[i]);
+          *(p++) = ' ';
+        }
+      p[-1] = '\0';
+
+      define_variable_cname ("-*-eval-flags-*-", value, o_automatic, 0);
+    }
+
+  /* Read all the makefiles.  */
+
+  read_files = read_all_makefiles (makefiles == 0 ? 0 : makefiles->list);
+
+#ifdef WINDOWS32
+  /* look one last time after reading all Makefiles */
+  if (no_default_sh_exe)
+    no_default_sh_exe = !find_and_set_default_shell (NULL);
+#endif /* WINDOWS32 */
+
+#if defined (__MSDOS__) || defined (__EMX__)
+  /* We need to know what kind of shell we will be using.  */
+  {
+    extern int _is_unixy_shell (const char *_path);
+    struct variable *shv = lookup_variable (STRING_SIZE_TUPLE ("SHELL"));
+    extern int unixy_shell;
+    extern const char *default_shell;
+
+    if (shv && *shv->value)
+      {
+        char *shell_path = recursively_expand (shv);
+
+        if (shell_path && _is_unixy_shell (shell_path))
+          unixy_shell = 1;
+        else
+          unixy_shell = 0;
+        if (shell_path)
+          default_shell = shell_path;
+      }
+  }
+#endif /* __MSDOS__ || __EMX__ */
+
+  {
+    int old_builtin_rules_flag = no_builtin_rules_flag;
+    int old_builtin_variables_flag = no_builtin_variables_flag;
+
+    /* Decode switches again, for variables set by the makefile.  */
+    decode_env_switches (STRING_SIZE_TUPLE ("GNUMAKEFLAGS"));
+
+    /* Clear GNUMAKEFLAGS to avoid duplication.  */
+    define_variable_cname ("GNUMAKEFLAGS", "", o_override, 0);
+
+    decode_env_switches (STRING_SIZE_TUPLE ("MAKEFLAGS"));
+#if 0
+    decode_env_switches (STRING_SIZE_TUPLE ("MFLAGS"));
+#endif
+
+    /* Reset in case the switches changed our mind.  */
+    syncing = (output_sync == OUTPUT_SYNC_LINE
+               || output_sync == OUTPUT_SYNC_TARGET);
+
+    if (make_sync.syncout && ! syncing)
+      output_close (&make_sync);
+
+    make_sync.syncout = syncing;
+    OUTPUT_SET (&make_sync);
+
+    /* If we've disabled builtin rules, get rid of them.  */
+    if (no_builtin_rules_flag && ! old_builtin_rules_flag)
+      {
+        if (suffix_file->builtin)
+          {
+            free_dep_chain (suffix_file->deps);
+            suffix_file->deps = 0;
+          }
+        define_variable_cname ("SUFFIXES", "", o_default, 0);
+      }
+
+    /* If we've disabled builtin variables, get rid of them.  */
+    if (no_builtin_variables_flag && ! old_builtin_variables_flag)
+      undefine_default_variables ();
+  }
+
+#if defined (__MSDOS__) || defined (__EMX__) || defined (VMS)
+  if (job_slots != 1
+# ifdef __EMX__
+      && _osmode != OS2_MODE /* turn off -j if we are in DOS mode */
+# endif
+      )
+    {
+      O (error, NILF,
+         _("Parallel jobs (-j) are not supported on this platform."));
+      O (error, NILF, _("Resetting to single job (-j1) mode."));
+      job_slots = 1;
+    }
+#endif
+
+#ifdef MAKE_JOBSERVER
+  /* If we have >1 slot but no jobserver-fds, then we're a top-level make.
+     Set up the pipe and install the fds option for our children.  */
+
+  if (job_slots > 1)
+    {
+#ifdef WINDOWS32
+      /* sub_proc.c cannot wait for more than MAXIMUM_WAIT_OBJECTS objects
+       * and one of them is the job-server semaphore object.  Limit the
+       * number of available job slots to (MAXIMUM_WAIT_OBJECTS - 1). */
+
+      if (job_slots >= MAXIMUM_WAIT_OBJECTS)
+        {
+          job_slots = MAXIMUM_WAIT_OBJECTS - 1;
+          DB (DB_JOBS, (_("Jobserver slots limited to %d\n"), job_slots));
+        }
+
+      if (! create_jobserver_semaphore (job_slots - 1))
+        {
+          DWORD err = GetLastError ();
+          const char *estr = map_windows32_error_to_string (err);
+          ONS (fatal, NILF,
+               _("creating jobserver semaphore: (Error %ld: %s)"), err, estr);
+        }
+#else
+      char c = '+';
+
+      if (pipe (job_fds) < 0 || (job_rfd = dup (job_fds[0])) < 0)
+        pfatal_with_name (_("creating jobs pipe"));
+#endif
+
+      /* Every make assumes that it always has one job it can run.  For the
+         submakes it's the token they were given by their parent.  For the
+         top make, we just subtract one from the number the user wants.  We
+         want job_slots to be 0 to indicate we're using the jobserver.  */
+
+      master_job_slots = job_slots;
+
+#ifdef WINDOWS32
+      /* We're using the jobserver so set job_slots to 0. */
+      job_slots = 0;
+#else
+      while (--job_slots)
+        {
+          int r;
+
+          EINTRLOOP (r, write (job_fds[1], &c, 1));
+          if (r != 1)
+            pfatal_with_name (_("init jobserver pipe"));
+        }
+#endif
+
+      /* Fill in the jobserver_fds for our children.  */
+
+#ifdef WINDOWS32
+      jobserver_fds = xmalloc (MAX_PATH + 1);
+      strcpy (jobserver_fds, get_jobserver_semaphore_name ());
+#else
+      jobserver_fds = xmalloc ((INTSTR_LENGTH * 2) + 2);
+      sprintf (jobserver_fds, "%d,%d", job_fds[0], job_fds[1]);
+#endif
+    }
+#endif
+
+#ifndef MAKE_SYMLINKS
+  if (check_symlink_flag)
+    {
+      O (error, NILF, _("Symbolic links not supported: disabling -L."));
+      check_symlink_flag = 0;
+    }
+#endif
+
+  /* Set up MAKEFLAGS and MFLAGS again, so they will be right.  */
+
+  define_makeflags (1, 0);
+
+  /* Make each 'struct dep' point at the 'struct file' for the file
+     depended on.  Also do magic for special targets.  */
+
+  snap_deps ();
+
+  /* Convert old-style suffix rules to pattern rules.  It is important to
+     do this before installing the built-in pattern rules below, so that
+     makefile-specified suffix rules take precedence over built-in pattern
+     rules.  */
+
+  convert_to_pattern ();
+
+  /* Install the default implicit pattern rules.
+     This used to be done before reading the makefiles.
+     But in that case, built-in pattern rules were in the chain
+     before user-defined ones, so they matched first.  */
+
+  install_default_implicit_rules ();
+
+  /* Compute implicit rule limits.  */
+
+  count_implicit_rule_limits ();
+
+  /* Construct the listings of directories in VPATH lists.  */
+
+  build_vpath_lists ();
+
+  /* Mark files given with -o flags as very old and as having been updated
+     already, and files given with -W flags as brand new (time-stamp as far
+     as possible into the future).  If restarts is set we'll do -W later.  */
+
+  if (old_files != 0)
+    {
+      const char **p;
+      for (p = old_files->list; *p != 0; ++p)
+        {
+          struct file *f = enter_file (*p);
+          f->last_mtime = f->mtime_before_update = OLD_MTIME;
+          f->updated = 1;
+          f->update_status = us_success;
+          f->command_state = cs_finished;
+        }
+    }
+
+  if (!restarts && new_files != 0)
+    {
+      const char **p;
+      for (p = new_files->list; *p != 0; ++p)
+        {
+          struct file *f = enter_file (*p);
+          f->last_mtime = f->mtime_before_update = NEW_MTIME;
+        }
+    }
+
+  /* Initialize the remote job module.  */
+  remote_setup ();
+
+  /* Dump any output we've collected.  */
+
+  OUTPUT_UNSET ();
+  output_close (&make_sync);
+
+  if (read_files != 0)
+    {
+      /* Update any makefiles if necessary.  */
+
+      FILE_TIMESTAMP *makefile_mtimes = 0;
+      unsigned int mm_idx = 0;
+      char **aargv = NULL;
+      const char **nargv;
+      int nargc;
+      int orig_db_level = db_level;
+      enum update_status status;
+
+      if (! ISDB (DB_MAKEFILES))
+        db_level = DB_NONE;
+
+      DB (DB_BASIC, (_("Updating makefiles....\n")));
+
+      /* Remove any makefiles we don't want to try to update.
+         Also record the current modtimes so we can compare them later.  */
+      {
+        register struct dep *d, *last;
+        last = 0;
+        d = read_files;
+        while (d != 0)
+          {
+            struct file *f = d->file;
+            if (f->double_colon)
+              for (f = f->double_colon; f != NULL; f = f->prev)
+                {
+                  if (f->deps == 0 && f->cmds != 0)
+                    {
+                      /* This makefile is a :: target with commands, but
+                         no dependencies.  So, it will always be remade.
+                         This might well cause an infinite loop, so don't
+                         try to remake it.  (This will only happen if
+                         your makefiles are written exceptionally
+                         stupidly; but if you work for Athena, that's how
+                         you write your makefiles.)  */
+
+                      DB (DB_VERBOSE,
+                          (_("Makefile '%s' might loop; not remaking it.\n"),
+                           f->name));
+
+                      if (last == 0)
+                        read_files = d->next;
+                      else
+                        last->next = d->next;
+
+                      /* Free the storage.  */
+                      free_dep (d);
+
+                      d = last == 0 ? read_files : last->next;
+
+                      break;
+                    }
+                }
+            if (f == NULL || !f->double_colon)
+              {
+                makefile_mtimes = xrealloc (makefile_mtimes,
+                                            (mm_idx+1)
+                                            * sizeof (FILE_TIMESTAMP));
+                makefile_mtimes[mm_idx++] = file_mtime_no_search (d->file);
+                last = d;
+                d = d->next;
+              }
+          }
+      }
+
+      /* Set up 'MAKEFLAGS' specially while remaking makefiles.  */
+      define_makeflags (1, 1);
+
+      rebuilding_makefiles = 1;
+      status = update_goal_chain (read_files);
+      rebuilding_makefiles = 0;
+
+      switch (status)
+        {
+        case us_question:
+          /* The only way this can happen is if the user specified -q and asked
+           * for one of the makefiles to be remade as a target on the command
+           * line.  Since we're not actually updating anything with -q we can
+           * treat this as "did nothing".
+           */
+
+        case us_none:
+          /* Did nothing.  */
+          break;
+
+        case us_failed:
+          /* Failed to update.  Figure out if we care.  */
+          {
+            /* Nonzero if any makefile was successfully remade.  */
+            int any_remade = 0;
+            /* Nonzero if any makefile we care about failed
+               in updating or could not be found at all.  */
+            int any_failed = 0;
+            unsigned int i;
+            struct dep *d;
+
+            for (i = 0, d = read_files; d != 0; ++i, d = d->next)
+              {
+                /* Reset the considered flag; we may need to look at the file
+                   again to print an error.  */
+                d->file->considered = 0;
+
+                if (d->file->updated)
+                  {
+                    /* This makefile was updated.  */
+                    if (d->file->update_status == us_success)
+                      {
+                        /* It was successfully updated.  */
+                        any_remade |= (file_mtime_no_search (d->file)
+                                       != makefile_mtimes[i]);
+                      }
+                    else if (! (d->changed & RM_DONTCARE))
+                      {
+                        FILE_TIMESTAMP mtime;
+                        /* The update failed and this makefile was not
+                           from the MAKEFILES variable, so we care.  */
+                        OS (error, NILF, _("Failed to remake makefile '%s'."),
+                            d->file->name);
+                        mtime = file_mtime_no_search (d->file);
+                        any_remade |= (mtime != NONEXISTENT_MTIME
+                                       && mtime != makefile_mtimes[i]);
+                        makefile_status = MAKE_FAILURE;
+                      }
+                  }
+                else
+                  /* This makefile was not found at all.  */
+                  if (! (d->changed & RM_DONTCARE))
+                    {
+                      const char *dnm = dep_name (d);
+                      size_t l = strlen (dnm);
+
+                      /* This is a makefile we care about.  See how much.  */
+                      if (d->changed & RM_INCLUDED)
+                        /* An included makefile.  We don't need to die, but we
+                           do want to complain.  */
+                        error (NILF, l,
+                               _("Included makefile '%s' was not found."), dnm);
+                      else
+                        {
+                          /* A normal makefile.  We must die later.  */
+                          error (NILF, l,
+                                 _("Makefile '%s' was not found"), dnm);
+                          any_failed = 1;
+                        }
+                    }
+              }
+            /* Reset this to empty so we get the right error message below.  */
+            read_files = 0;
+
+            if (any_remade)
+              goto re_exec;
+            if (any_failed)
+              die (MAKE_FAILURE);
+            break;
+          }
+
+        case us_success:
+        re_exec:
+          /* Updated successfully.  Re-exec ourselves.  */
+
+          remove_intermediates (0);
+
+          if (print_data_base_flag)
+            print_data_base ();
+
+          clean_jobserver (0);
+
+          if (makefiles != 0)
+            {
+              /* These names might have changed.  */
+              int i, j = 0;
+              for (i = 1; i < argc; ++i)
+                if (strneq (argv[i], "-f", 2)) /* XXX */
+                  {
+                    if (argv[i][2] == '\0')
+                      /* This cast is OK since we never modify argv.  */
+                      argv[++i] = (char *) makefiles->list[j];
+                    else
+                      argv[i] = xstrdup (concat (2, "-f", makefiles->list[j]));
+                    ++j;
+                  }
+            }
+
+          /* Add -o option for the stdin temporary file, if necessary.  */
+          nargc = argc;
+          if (stdin_nm)
+            {
+              void *m = xmalloc ((nargc + 2) * sizeof (char *));
+              aargv = m;
+              memcpy (aargv, argv, argc * sizeof (char *));
+              aargv[nargc++] = xstrdup (concat (2, "-o", stdin_nm));
+              aargv[nargc] = 0;
+              nargv = m;
+            }
+          else
+            nargv = (const char**)argv;
+
+          if (directories != 0 && directories->idx > 0)
+            {
+              int bad = 1;
+              if (directory_before_chdir != 0)
+                {
+                  if (chdir (directory_before_chdir) < 0)
+                      perror_with_name ("chdir", "");
+                  else
+                    bad = 0;
+                }
+              if (bad)
+                O (fatal, NILF,
+                   _("Couldn't change back to original directory."));
+            }
+
+          ++restarts;
+
+          /* If we're re-exec'ing the first make, put back the number of
+             job slots so define_makefiles() will get it right.  */
+          if (master_job_slots)
+            job_slots = master_job_slots;
+
+          if (ISDB (DB_BASIC))
+            {
+              const char **p;
+              printf (_("Re-executing[%u]:"), restarts);
+              for (p = nargv; *p != 0; ++p)
+                printf (" %s", *p);
+              putchar ('\n');
+            }
+
+#ifndef _AMIGA
+          {
+            char **p;
+            for (p = environ; *p != 0; ++p)
+              {
+                if (strneq (*p, MAKELEVEL_NAME "=", MAKELEVEL_LENGTH+1))
+                  {
+                    *p = alloca (40);
+                    sprintf (*p, "%s=%u", MAKELEVEL_NAME, makelevel);
+                  }
+                else if (strneq (*p, "MAKE_RESTARTS=", CSTRLEN ("MAKE_RESTARTS=")))
+                  {
+                    *p = alloca (40);
+                    sprintf (*p, "MAKE_RESTARTS=%s%u",
+                             OUTPUT_IS_TRACED () ? "-" : "", restarts);
+                    restarts = 0;
+                  }
+              }
+          }
+#else /* AMIGA */
+          {
+            char buffer[256];
+
+            sprintf (buffer, "%u", makelevel);
+            SetVar (MAKELEVEL_NAME, buffer, -1, GVF_GLOBAL_ONLY);
+
+            sprintf (buffer, "%s%u", OUTPUT_IS_TRACED () ? "-" : "", restarts);
+            SetVar ("MAKE_RESTARTS", buffer, -1, GVF_GLOBAL_ONLY);
+            restarts = 0;
+          }
+#endif
+
+          /* If we didn't set the restarts variable yet, add it.  */
+          if (restarts)
+            {
+              char *b = alloca (40);
+              sprintf (b, "MAKE_RESTARTS=%s%u",
+                       OUTPUT_IS_TRACED () ? "-" : "", restarts);
+              putenv (b);
+            }
+
+          fflush (stdout);
+          fflush (stderr);
+
+          /* Close the dup'd jobserver pipe if we opened one.  */
+          if (job_rfd >= 0)
+            close (job_rfd);
+
+#ifdef _AMIGA
+          exec_command (nargv);
+          exit (0);
+#elif defined (__EMX__)
+          {
+            /* It is not possible to use execve() here because this
+               would cause the parent process to be terminated with
+               exit code 0 before the child process has been terminated.
+               Therefore it may be the best solution simply to spawn the
+               child process including all file handles and to wait for its
+               termination. */
+            int pid;
+            int r;
+            pid = child_execute_job (FD_STDIN, FD_STDOUT, FD_STDERR,
+                                     nargv, environ);
+
+            /* is this loop really necessary? */
+            do {
+              pid = wait (&r);
+            } while (pid <= 0);
+            /* use the exit code of the child process */
+            exit (WIFEXITED(r) ? WEXITSTATUS(r) : EXIT_FAILURE);
+          }
+#else
+          exec_command ((char **)nargv, environ);
+#endif
+          free (aargv);
+          break;
+        }
+
+      db_level = orig_db_level;
+
+      /* Free the makefile mtimes.  */
+      free (makefile_mtimes);
+    }
+
+  /* Set up 'MAKEFLAGS' again for the normal targets.  */
+  define_makeflags (1, 0);
+
+  /* Set always_make_flag if -B was given.  */
+  always_make_flag = always_make_set;
+
+  /* If restarts is set we haven't set up -W files yet, so do that now.  */
+  if (restarts && new_files != 0)
+    {
+      const char **p;
+      for (p = new_files->list; *p != 0; ++p)
+        {
+          struct file *f = enter_file (*p);
+          f->last_mtime = f->mtime_before_update = NEW_MTIME;
+        }
+    }
+
+  /* If there is a temp file from reading a makefile from stdin, get rid of
+     it now.  */
+  if (stdin_nm && unlink (stdin_nm) < 0 && errno != ENOENT)
+    perror_with_name (_("unlink (temporary file): "), stdin_nm);
+
+  /* If there were no command-line goals, use the default.  */
+  if (goals == 0)
+    {
+      char *p;
+
+      if (default_goal_var->recursive)
+        p = variable_expand (default_goal_var->value);
+      else
+        {
+          p = variable_buffer_output (variable_buffer, default_goal_var->value,
+                                      strlen (default_goal_var->value));
+          *p = '\0';
+          p = variable_buffer;
+        }
+
+      if (*p != '\0')
+        {
+          struct file *f = lookup_file (p);
+
+          /* If .DEFAULT_GOAL is a non-existent target, enter it into the
+             table and let the standard logic sort it out. */
+          if (f == 0)
+            {
+              struct nameseq *ns;
+
+              ns = PARSE_SIMPLE_SEQ (&p, struct nameseq);
+              if (ns)
+                {
+                  /* .DEFAULT_GOAL should contain one target. */
+                  if (ns->next != 0)
+                    O (fatal, NILF,
+                       _(".DEFAULT_GOAL contains more than one target"));
+
+                  f = enter_file (strcache_add (ns->name));
+
+                  ns->name = 0; /* It was reused by enter_file(). */
+                  free_ns_chain (ns);
+                }
+            }
+
+          if (f)
+            {
+              goals = alloc_dep ();
+              goals->file = f;
+            }
+        }
+    }
+  else
+    lastgoal->next = 0;
+
+
+  if (!goals)
+    {
+      if (read_files == 0)
+        O (fatal, NILF, _("No targets specified and no makefile found"));
+
+      O (fatal, NILF, _("No targets"));
+    }
+
+  /* Update the goals.  */
+
+  DB (DB_BASIC, (_("Updating goal targets....\n")));
+
+  {
+    switch (update_goal_chain (goals))
+    {
+      case us_none:
+        /* Nothing happened.  */
+        /* FALLTHROUGH */
+      case us_success:
+        /* Keep the previous result.  */
+        break;
+      case us_question:
+        /* We are under -q and would run some commands.  */
+        makefile_status = MAKE_TROUBLE;
+        break;
+      case us_failed:
+        /* Updating failed.  POSIX.2 specifies exit status >1 for this;
+           but in VMS, there is only success and failure.  */
+        makefile_status = MAKE_FAILURE;
+        break;
+    }
+
+    /* If we detected some clock skew, generate one last warning */
+    if (clock_skew_detected)
+      O (error, NILF,
+         _("warning:  Clock skew detected.  Your build may be incomplete."));
+
+    /* Exit.  */
+    die (makefile_status);
+  }
+
+  /* NOTREACHED */
+  exit (MAKE_SUCCESS);
+}
+
+/* Parsing of arguments, decoding of switches.  */
+
+static char options[1 + sizeof (switches) / sizeof (switches[0]) * 3];
+static struct option long_options[(sizeof (switches) / sizeof (switches[0])) +
+                                  (sizeof (long_option_aliases) /
+                                   sizeof (long_option_aliases[0]))];
+
+/* Fill in the string and vector for getopt.  */
+static void
+init_switches (void)
+{
+  char *p;
+  unsigned int c;
+  unsigned int i;
+
+  if (options[0] != '\0')
+    /* Already done.  */
+    return;
+
+  p = options;
+
+  /* Return switch and non-switch args in order, regardless of
+     POSIXLY_CORRECT.  Non-switch args are returned as option 1.  */
+  *p++ = '-';
+
+  for (i = 0; switches[i].c != '\0'; ++i)
+    {
+      long_options[i].name = (switches[i].long_name == 0 ? "" :
+                              switches[i].long_name);
+      long_options[i].flag = 0;
+      long_options[i].val = switches[i].c;
+      if (short_option (switches[i].c))
+        *p++ = switches[i].c;
+      switch (switches[i].type)
+        {
+        case flag:
+        case flag_off:
+        case ignore:
+          long_options[i].has_arg = no_argument;
+          break;
+
+        case string:
+        case strlist:
+        case filename:
+        case positive_int:
+        case floating:
+          if (short_option (switches[i].c))
+            *p++ = ':';
+          if (switches[i].noarg_value != 0)
+            {
+              if (short_option (switches[i].c))
+                *p++ = ':';
+              long_options[i].has_arg = optional_argument;
+            }
+          else
+            long_options[i].has_arg = required_argument;
+          break;
+        }
+    }
+  *p = '\0';
+  for (c = 0; c < (sizeof (long_option_aliases) /
+                   sizeof (long_option_aliases[0]));
+       ++c)
+    long_options[i++] = long_option_aliases[c];
+  long_options[i].name = 0;
+}
+
+
+/* Non-option argument.  It might be a variable definition.  */
+static void
+handle_non_switch_argument (const char *arg, int env)
+{
+  struct variable *v;
+
+  if (arg[0] == '-' && arg[1] == '\0')
+    /* Ignore plain '-' for compatibility.  */
+    return;
+
+  v = try_variable_definition (0, arg, o_command, 0);
+  if (v != 0)
+    {
+      /* It is indeed a variable definition.  If we don't already have this
+         one, record a pointer to the variable for later use in
+         define_makeflags.  */
+      struct command_variable *cv;
+
+      for (cv = command_variables; cv != 0; cv = cv->next)
+        if (cv->variable == v)
+          break;
+
+      if (! cv)
+        {
+          cv = xmalloc (sizeof (*cv));
+          cv->variable = v;
+          cv->next = command_variables;
+          command_variables = cv;
+        }
+    }
+  else if (! env)
+    {
+      /* Not an option or variable definition; it must be a goal
+         target!  Enter it as a file and add it to the dep chain of
+         goals.  */
+      struct file *f = enter_file (strcache_add (expand_command_line_file (arg)));
+      f->cmd_target = 1;
+
+      if (goals == 0)
+        {
+          goals = alloc_dep ();
+          lastgoal = goals;
+        }
+      else
+        {
+          lastgoal->next = alloc_dep ();
+          lastgoal = lastgoal->next;
+        }
+
+      lastgoal->file = f;
+
+      {
+        /* Add this target name to the MAKECMDGOALS variable. */
+        struct variable *gv;
+        const char *value;
+
+        gv = lookup_variable (STRING_SIZE_TUPLE ("MAKECMDGOALS"));
+        if (gv == 0)
+          value = f->name;
+        else
+          {
+            /* Paste the old and new values together */
+            unsigned int oldlen, newlen;
+            char *vp;
+
+            oldlen = strlen (gv->value);
+            newlen = strlen (f->name);
+            vp = alloca (oldlen + 1 + newlen + 1);
+            memcpy (vp, gv->value, oldlen);
+            vp[oldlen] = ' ';
+            memcpy (&vp[oldlen + 1], f->name, newlen + 1);
+            value = vp;
+          }
+        define_variable_cname ("MAKECMDGOALS", value, o_default, 0);
+      }
+    }
+}
+
+/* Print a nice usage method.  */
+
+static void
+print_usage (int bad)
+{
+  const char *const *cpp;
+  FILE *usageto;
+
+  if (print_version_flag)
+    print_version ();
+
+  usageto = bad ? stderr : stdout;
+
+  fprintf (usageto, _("Usage: %s [options] [target] ...\n"), program);
+
+  for (cpp = usage; *cpp; ++cpp)
+    fputs (_(*cpp), usageto);
+
+  if (!remote_description || *remote_description == '\0')
+    fprintf (usageto, _("\nThis program built for %s\n"), make_host);
+  else
+    fprintf (usageto, _("\nThis program built for %s (%s)\n"),
+             make_host, remote_description);
+
+  fprintf (usageto, _("Report bugs to <bug-make@gnu.org>\n"));
+}
+
+/* Decode switches from ARGC and ARGV.
+   They came from the environment if ENV is nonzero.  */
+
+static void
+decode_switches (int argc, const char **argv, int env)
+{
+  int bad = 0;
+  register const struct command_switch *cs;
+  register struct stringlist *sl;
+  register int c;
+
+  /* getopt does most of the parsing for us.
+     First, get its vectors set up.  */
+
+  init_switches ();
+
+  /* Let getopt produce error messages for the command line,
+     but not for options from the environment.  */
+  opterr = !env;
+  /* Reset getopt's state.  */
+  optind = 0;
+
+  while (optind < argc)
+    {
+      const char *coptarg;
+
+      /* Parse the next argument.  */
+      c = getopt_long (argc, (char*const*)argv, options, long_options, NULL);
+      coptarg = optarg;
+      if (c == EOF)
+        /* End of arguments, or "--" marker seen.  */
+        break;
+      else if (c == 1)
+        /* An argument not starting with a dash.  */
+        handle_non_switch_argument (coptarg, env);
+      else if (c == '?')
+        /* Bad option.  We will print a usage message and die later.
+           But continue to parse the other options so the user can
+           see all he did wrong.  */
+        bad = 1;
+      else
+        for (cs = switches; cs->c != '\0'; ++cs)
+          if (cs->c == c)
+            {
+              /* Whether or not we will actually do anything with
+                 this switch.  We test this individually inside the
+                 switch below rather than just once outside it, so that
+                 options which are to be ignored still consume args.  */
+              int doit = !env || cs->env;
+
+              switch (cs->type)
+                {
+                default:
+                  abort ();
+
+                case ignore:
+                  break;
+
+                case flag:
+                case flag_off:
+                  if (doit)
+                    *(int *) cs->value_ptr = cs->type == flag;
+                  break;
+
+                case string:
+                case strlist:
+                case filename:
+                  if (!doit)
+                    break;
+
+                  if (! coptarg)
+                    coptarg = xstrdup (cs->noarg_value);
+                  else if (*coptarg == '\0')
+                    {
+                      char opt[2] = "c";
+                      const char *op = opt;
+
+                      if (short_option (cs->c))
+                        opt[0] = cs->c;
+                      else
+                        op = cs->long_name;
+
+                      error (NILF, strlen (op),
+                             _("the '%s%s' option requires a non-empty string argument"),
+                             short_option (cs->c) ? "-" : "--", op);
+                      bad = 1;
+                      break;
+                    }
+
+                  if (cs->type == string)
+                    {
+                      char **val = (char **)cs->value_ptr;
+                      free (*val);
+                      *val = xstrdup (coptarg);
+                      break;
+                    }
+
+                  sl = *(struct stringlist **) cs->value_ptr;
+                  if (sl == 0)
+                    {
+                      sl = xmalloc (sizeof (struct stringlist));
+                      sl->max = 5;
+                      sl->idx = 0;
+                      sl->list = xmalloc (5 * sizeof (char *));
+                      *(struct stringlist **) cs->value_ptr = sl;
+                    }
+                  else if (sl->idx == sl->max - 1)
+                    {
+                      sl->max += 5;
+                      /* MSVC erroneously warns without a cast here.  */
+                      sl->list = xrealloc ((void *)sl->list,
+                                           sl->max * sizeof (char *));
+                    }
+                  if (cs->type == filename)
+                    sl->list[sl->idx++] = expand_command_line_file (coptarg);
+                  else
+                    sl->list[sl->idx++] = xstrdup (coptarg);
+                  sl->list[sl->idx] = 0;
+                  break;
+
+                case positive_int:
+                  /* See if we have an option argument; if we do require that
+                     it's all digits, not something like "10foo".  */
+                  if (coptarg == 0 && argc > optind)
+                    {
+                      const char *cp;
+                      for (cp=argv[optind]; ISDIGIT (cp[0]); ++cp)
+                        ;
+                      if (cp[0] == '\0')
+                        coptarg = argv[optind++];
+                    }
+
+                  if (!doit)
+                    break;
+
+                  if (coptarg)
+                    {
+                      int i = atoi (coptarg);
+                      const char *cp;
+
+                      /* Yes, I realize we're repeating this in some cases.  */
+                      for (cp = coptarg; ISDIGIT (cp[0]); ++cp)
+                        ;
+
+                      if (i < 1 || cp[0] != '\0')
+                        {
+                          error (NILF, 0,
+                                 _("the '-%c' option requires a positive integer argument"),
+                                 cs->c);
+                          bad = 1;
+                        }
+                      else
+                        *(unsigned int *) cs->value_ptr = i;
+                    }
+                  else
+                    *(unsigned int *) cs->value_ptr
+                      = *(unsigned int *) cs->noarg_value;
+                  break;
+
+#ifndef NO_FLOAT
+                case floating:
+                  if (coptarg == 0 && optind < argc
+                      && (ISDIGIT (argv[optind][0]) || argv[optind][0] == '.'))
+                    coptarg = argv[optind++];
+
+                  if (doit)
+                    *(double *) cs->value_ptr
+                      = (coptarg != 0 ? atof (coptarg)
+                         : *(double *) cs->noarg_value);
+
+                  break;
+#endif
+                }
+
+              /* We've found the switch.  Stop looking.  */
+              break;
+            }
+    }
+
+  /* There are no more options according to getting getopt, but there may
+     be some arguments left.  Since we have asked for non-option arguments
+     to be returned in order, this only happens when there is a "--"
+     argument to prevent later arguments from being options.  */
+  while (optind < argc)
+    handle_non_switch_argument (argv[optind++], env);
+
+  if (!env && (bad || print_usage_flag))
+    {
+      print_usage (bad);
+      die (bad ? MAKE_FAILURE : MAKE_SUCCESS);
+    }
+
+  /* If there are any options that need to be decoded do it now.  */
+  decode_debug_flags ();
+  decode_output_sync_flags ();
+}
+
+/* Decode switches from environment variable ENVAR (which is LEN chars long).
+   We do this by chopping the value into a vector of words, prepending a
+   dash to the first word if it lacks one, and passing the vector to
+   decode_switches.  */
+
+static void
+decode_env_switches (const char *envar, unsigned int len)
+{
+  char *varref = alloca (2 + len + 2);
+  char *value, *p, *buf;
+  int argc;
+  const char **argv;
+
+  /* Get the variable's value.  */
+  varref[0] = '$';
+  varref[1] = '(';
+  memcpy (&varref[2], envar, len);
+  varref[2 + len] = ')';
+  varref[2 + len + 1] = '\0';
+  value = variable_expand (varref);
+
+  /* Skip whitespace, and check for an empty value.  */
+  value = next_token (value);
+  len = strlen (value);
+  if (len == 0)
+    return;
+
+  /* Allocate a vector that is definitely big enough.  */
+  argv = alloca ((1 + len + 1) * sizeof (char *));
+
+  /* getopt will look at the arguments starting at ARGV[1].
+     Prepend a spacer word.  */
+  argv[0] = 0;
+  argc = 1;
+
+  /* We need a buffer to copy the value into while we split it into words
+     and unquote it.  Set up in case we need to prepend a dash later.  */
+  buf = alloca (1 + len + 1);
+  buf[0] = '-';
+  p = buf+1;
+  argv[argc] = p;
+  while (*value != '\0')
+    {
+      if (*value == '\\' && value[1] != '\0')
+        ++value;                /* Skip the backslash.  */
+      else if (isblank ((unsigned char)*value))
+        {
+          /* End of the word.  */
+          *p++ = '\0';
+          argv[++argc] = p;
+          do
+            ++value;
+          while (isblank ((unsigned char)*value));
+          continue;
+        }
+      *p++ = *value++;
+    }
+  *p = '\0';
+  argv[++argc] = 0;
+  assert (p < buf + len + 2);
+
+  if (argv[1][0] != '-' && strchr (argv[1], '=') == 0)
+    /* The first word doesn't start with a dash and isn't a variable
+       definition, so add a dash.  */
+    argv[1] = buf;
+
+  /* Parse those words.  */
+  decode_switches (argc, argv, 1);
+}
+
+/* Quote the string IN so that it will be interpreted as a single word with
+   no magic by decode_env_switches; also double dollar signs to avoid
+   variable expansion in make itself.  Write the result into OUT, returning
+   the address of the next character to be written.
+   Allocating space for OUT twice the length of IN is always sufficient.  */
+
+static char *
+quote_for_env (char *out, const char *in)
+{
+  while (*in != '\0')
+    {
+      if (*in == '$')
+        *out++ = '$';
+      else if (isblank ((unsigned char)*in) || *in == '\\')
+        *out++ = '\\';
+      *out++ = *in++;
+    }
+
+  return out;
+}
+
+/* Define the MAKEFLAGS and MFLAGS variables to reflect the settings of the
+   command switches.  Include options with args if ALL is nonzero.
+   Don't include options with the 'no_makefile' flag set if MAKEFILE.  */
+
+static struct variable *
+define_makeflags (int all, int makefile)
+{
+  const char ref[] = "$(MAKEOVERRIDES)";
+  const char posixref[] = "$(-*-command-variables-*-)";
+  const char evalref[] = "$(-*-eval-flags-*-)";
+  const struct command_switch *cs;
+  char *flagstring;
+  char *p;
+
+  /* We will construct a linked list of 'struct flag's describing
+     all the flags which need to go in MAKEFLAGS.  Then, once we
+     know how many there are and their lengths, we can put them all
+     together in a string.  */
+
+  struct flag
+    {
+      struct flag *next;
+      const struct command_switch *cs;
+      const char *arg;
+    };
+  struct flag *flags = 0;
+  struct flag *last = 0;
+  unsigned int flagslen = 0;
+#define ADD_FLAG(ARG, LEN) \
+  do {                                                                        \
+    struct flag *new = alloca (sizeof (struct flag));                         \
+    new->cs = cs;                                                             \
+    new->arg = (ARG);                                                         \
+    new->next = 0;                                                            \
+    if (! flags)                                                              \
+      flags = new;                                                            \
+    else                                                                      \
+      last->next = new;                                                       \
+    last = new;                                                               \
+    if (new->arg == 0)                                                        \
+      /* Just a single flag letter: " -x"  */                                 \
+      flagslen += 3;                                                          \
+    else                                                                      \
+      /* " -xfoo", plus space to escape "foo".  */                            \
+      flagslen += 1 + 1 + 1 + (3 * (LEN));                                    \
+    if (!short_option (cs->c))                                                \
+      /* This switch has no single-letter version, so we use the long.  */    \
+      flagslen += 2 + strlen (cs->long_name);                                 \
+  } while (0)
+
+  for (cs = switches; cs->c != '\0'; ++cs)
+    if (cs->toenv && (!makefile || !cs->no_makefile))
+      switch (cs->type)
+        {
+        case ignore:
+          break;
+
+        case flag:
+        case flag_off:
+          if (!*(int *) cs->value_ptr == (cs->type == flag_off)
+              && (cs->default_value == 0
+                  || *(int *) cs->value_ptr != *(int *) cs->default_value))
+            ADD_FLAG (0, 0);
+          break;
+
+        case positive_int:
+          if (all)
+            {
+              if ((cs->default_value != 0
+                   && (*(unsigned int *) cs->value_ptr
+                       == *(unsigned int *) cs->default_value)))
+                break;
+              else if (cs->noarg_value != 0
+                       && (*(unsigned int *) cs->value_ptr ==
+                           *(unsigned int *) cs->noarg_value))
+                ADD_FLAG ("", 0); /* Optional value omitted; see below.  */
+              else
+                {
+                  char *buf = alloca (30);
+                  sprintf (buf, "%u", *(unsigned int *) cs->value_ptr);
+                  ADD_FLAG (buf, strlen (buf));
+                }
+            }
+          break;
+
+#ifndef NO_FLOAT
+        case floating:
+          if (all)
+            {
+              if (cs->default_value != 0
+                  && (*(double *) cs->value_ptr
+                      == *(double *) cs->default_value))
+                break;
+              else if (cs->noarg_value != 0
+                       && (*(double *) cs->value_ptr
+                           == *(double *) cs->noarg_value))
+                ADD_FLAG ("", 0); /* Optional value omitted; see below.  */
+              else
+                {
+                  char *buf = alloca (100);
+                  sprintf (buf, "%g", *(double *) cs->value_ptr);
+                  ADD_FLAG (buf, strlen (buf));
+                }
+            }
+          break;
+#endif
+
+        case string:
+          if (all)
+            {
+              p = *((char **)cs->value_ptr);
+              if (p)
+                ADD_FLAG (p, strlen (p));
+            }
+          break;
+
+        case filename:
+        case strlist:
+          if (all)
+            {
+              struct stringlist *sl = *(struct stringlist **) cs->value_ptr;
+              if (sl != 0)
+                {
+                  unsigned int i;
+                  for (i = 0; i < sl->idx; ++i)
+                    ADD_FLAG (sl->list[i], strlen (sl->list[i]));
+                }
+            }
+          break;
+
+        default:
+          abort ();
+        }
+
+#undef  ADD_FLAG
+
+  /* Four more for the possible " -- ", plus variable references.  */
+  flagslen += 4 + CSTRLEN (posixref) + 1 + CSTRLEN (evalref) + 1;
+
+  /* Construct the value in FLAGSTRING.
+     We allocate enough space for a preceding dash and trailing null.  */
+  flagstring = alloca (1 + flagslen + 1);
+  memset (flagstring, '\0', 1 + flagslen + 1);
+  p = flagstring;
+
+  /* Start with a dash, for MFLAGS.  */
+  *p++ = '-';
+
+  /* Add simple options as a group.  */
+  while (flags != 0 && !flags->arg && short_option (flags->cs->c))
+    {
+      *p++ = flags->cs->c;
+      flags = flags->next;
+    }
+
+  /* Now add more complex flags: ones with options and/or long names.  */
+  while (flags)
+    {
+      *p++ = ' ';
+      *p++ = '-';
+
+      /* Add the flag letter or name to the string.  */
+      if (short_option (flags->cs->c))
+        *p++ = flags->cs->c;
+      else
+        {
+          /* Long options require a double-dash.  */
+          *p++ = '-';
+          strcpy (p, flags->cs->long_name);
+          p += strlen (p);
+        }
+      /* An omitted optional argument has an ARG of "".  */
+      if (flags->arg && flags->arg[0] != '\0')
+        {
+          if (!short_option (flags->cs->c))
+            /* Long options require '='.  */
+            *p++ = '=';
+          p = quote_for_env (p, flags->arg);
+        }
+      flags = flags->next;
+    }
+
+  /* If no flags at all, get rid of the initial dash.  */
+  if (p == &flagstring[1])
+    {
+      flagstring[0] = '\0';
+      p = flagstring;
+    }
+
+  /* Define MFLAGS before appending variable definitions.  Omit an initial
+     empty dash.  Since MFLAGS is not parsed for flags, there is no reason to
+     override any makefile redefinition.  */
+  define_variable_cname ("MFLAGS",
+                         flagstring + (flagstring[0] == '-' && flagstring[1] == ' ' ? 2 : 0),
+                         o_env, 1);
+
+  /* Write a reference to -*-eval-flags-*-, which contains all the --eval
+     flag options.  */
+  if (eval_strings)
+    {
+      *p++ = ' ';
+      memcpy (p, evalref, CSTRLEN (evalref));
+      p += CSTRLEN (evalref);
+    }
+
+  if (all && command_variables)
+    {
+      /* Write a reference to $(MAKEOVERRIDES), which contains all the
+         command-line variable definitions.  Separate the variables from the
+         switches with a "--" arg.  */
+
+      strcpy (p, " -- ");
+      p += 4;
+
+      /* Copy in the string.  */
+      if (posix_pedantic)
+        {
+          memcpy (p, posixref, CSTRLEN (posixref));
+          p += CSTRLEN (posixref);
+        }
+      else
+        {
+          memcpy (p, ref, CSTRLEN (ref));
+          p += CSTRLEN (ref);
+        }
+    }
+
+  /* If there is a leading dash, omit it.  */
+  if (flagstring[0] == '-')
+    ++flagstring;
+
+  /* This used to use o_env, but that lost when a makefile defined MAKEFLAGS.
+     Makefiles set MAKEFLAGS to add switches, but we still want to redefine
+     its value with the full set of switches.  Then we used o_file, but that
+     lost when users added -e, causing a previous MAKEFLAGS env. var. to take
+     precedence over the new one.  Of course, an override or command
+     definition will still take precedence.  */
+  return define_variable_cname ("MAKEFLAGS", flagstring,
+                                env_overrides ? o_env_override : o_file, 1);
+}
+
+/* Print version information.  */
+
+static void
+print_version (void)
+{
+  static int printed_version = 0;
+
+  const char *precede = print_data_base_flag ? "# " : "";
+
+  if (printed_version)
+    /* Do it only once.  */
+    return;
+
+  printf ("%sGNU Make %s\n", precede, version_string);
+
+  if (!remote_description || *remote_description == '\0')
+    printf (_("%sBuilt for %s\n"), precede, make_host);
+  else
+    printf (_("%sBuilt for %s (%s)\n"),
+            precede, make_host, remote_description);
+
+  /* Print this untranslated.  The coding standards recommend translating the
+     (C) to the copyright symbol, but this string is going to change every
+     year, and none of the rest of it should be translated (including the
+     word "Copyright"), so it hardly seems worth it.  */
+
+  printf ("%sCopyright (C) 1988-2014 Free Software Foundation, Inc.\n",
+          precede);
+
+  printf (_("%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n\
+%sThis is free software: you are free to change and redistribute it.\n\
+%sThere is NO WARRANTY, to the extent permitted by law.\n"),
+            precede, precede, precede);
+
+  printed_version = 1;
+
+  /* Flush stdout so the user doesn't have to wait to see the
+     version information while make thinks about things.  */
+  fflush (stdout);
+}
+
+/* Print a bunch of information about this and that.  */
+
+static void
+print_data_base ()
+{
+  time_t when = time ((time_t *) 0);
+
+  print_version ();
+
+  printf (_("\n# Make data base, printed on %s"), ctime (&when));
+
+  print_variable_data_base ();
+  print_dir_data_base ();
+  print_rule_data_base ();
+  print_file_data_base ();
+  print_vpath_data_base ();
+  strcache_print_stats ("#");
+
+  when = time ((time_t *) 0);
+  printf (_("\n# Finished Make data base on %s\n"), ctime (&when));
+}
+
+static void
+clean_jobserver (int status)
+{
+  /* Sanity: have we written all our jobserver tokens back?  If our
+     exit status is 2 that means some kind of syntax error; we might not
+     have written all our tokens so do that now.  If tokens are left
+     after any other error code, that's bad.  */
+
+#ifdef WINDOWS32
+  if (has_jobserver_semaphore () && jobserver_tokens)
+#else
+  char token = '+';
+
+  if (job_fds[0] != -1 && jobserver_tokens)
+#endif
+    {
+      if (status != 2)
+        ON (error, NILF,
+            "INTERNAL: Exiting with %u jobserver tokens (should be 0)!",
+            jobserver_tokens);
+      else
+        /* Don't write back the "free" token */
+        while (--jobserver_tokens)
+          {
+#ifdef WINDOWS32
+            if (! release_jobserver_semaphore ())
+              perror_with_name ("release_jobserver_semaphore", "");
+#else
+            int r;
+
+            EINTRLOOP (r, write (job_fds[1], &token, 1));
+            if (r != 1)
+              perror_with_name ("write", "");
+#endif
+          }
+    }
+
+
+  /* Sanity: If we're the master, were all the tokens written back?  */
+
+  if (master_job_slots)
+    {
+      /* We didn't write one for ourself, so start at 1.  */
+      unsigned int tcnt = 1;
+
+#ifdef WINDOWS32
+      while (acquire_jobserver_semaphore ())
+          ++tcnt;
+#else
+      /* Close the write side, so the read() won't hang.  */
+      close (job_fds[1]);
+
+      while (read (job_fds[0], &token, 1) == 1)
+        ++tcnt;
+#endif
+
+      if (tcnt != master_job_slots)
+        ONN (error, NILF,
+             "INTERNAL: Exiting with %u jobserver tokens available; should be %u!",
+             tcnt, master_job_slots);
+
+#ifdef WINDOWS32
+      free_jobserver_semaphore ();
+#else
+      close (job_fds[0]);
+#endif
+
+      /* Clean out jobserver_fds so we don't pass this information to any
+         sub-makes.  Also reset job_slots since it will be put on the command
+         line, not in MAKEFLAGS.  */
+      job_slots = default_job_slots;
+      free (jobserver_fds);
+      jobserver_fds = 0;
+    }
+}
+
+/* Exit with STATUS, cleaning up as necessary.  */
+
+void
+die (int status)
+{
+  static char dying = 0;
+
+  if (!dying)
+    {
+      int err;
+
+      dying = 1;
+
+      if (print_version_flag)
+        print_version ();
+
+      /* Wait for children to die.  */
+      err = (status != 0);
+      while (job_slots_used > 0)
+        reap_children (1, err);
+
+      /* Let the remote job module clean up its state.  */
+      remote_cleanup ();
+
+      /* Remove the intermediate files.  */
+      remove_intermediates (0);
+
+      if (print_data_base_flag)
+        print_data_base ();
+
+      if (verify_flag)
+        verify_file_data_base ();
+
+      clean_jobserver (status);
+
+      if (output_context)
+        {
+          /* die() might be called in a recipe output context due to an
+             $(error ...) function.  */
+          output_close (output_context);
+
+          if (output_context != &make_sync)
+            output_close (&make_sync);
+
+          OUTPUT_UNSET ();
+        }
+
+      output_close (NULL);
+
+      /* Try to move back to the original directory.  This is essential on
+         MS-DOS (where there is really only one process), and on Unix it
+         puts core files in the original directory instead of the -C
+         directory.  Must wait until after remove_intermediates(), or unlinks
+         of relative pathnames fail.  */
+      if (directory_before_chdir != 0)
+        {
+          /* If it fails we don't care: shut up GCC.  */
+          int _x UNUSED;
+          _x = chdir (directory_before_chdir);
+        }
+    }
+
+  exit (status);
+}
diff --git a/make.1 b/make.1
new file mode 100644
index 0000000..ed04db9
--- /dev/null
+++ b/make.1
@@ -0,0 +1,381 @@
+.TH MAKE 1 "03 March 2012" "GNU" "User Commands"
+.SH NAME
+make \- GNU make utility to maintain groups of programs
+.SH SYNOPSIS
+.B make
+[\fIOPTION\fR]... [\fITARGET\fR]...
+.SH DESCRIPTION
+.LP
+The
+.I make
+utility will determine automatically which pieces of a large program need to
+be recompiled, and issue the commands to recompile them.  The manual describes
+the GNU implementation of
+.BR make ,
+which was written by Richard Stallman and Roland McGrath, and is currently
+maintained by Paul Smith.  Our examples show C programs, since they are very
+common, but you can use
+.B make
+with any programming language whose compiler can be run with a shell command.
+In fact,
+.B make
+is not limited to programs.  You can use it to describe any task where some
+files must be updated automatically from others whenever the others change.
+.LP
+To prepare to use
+.BR make ,
+you must write a file called the
+.I makefile
+that describes the relationships among files in your program, and the states
+the commands for updating each file.  In a program, typically the executable
+file is updated from object files, which are in turn made by compiling source
+files.
+.LP
+Once a suitable makefile exists, each time you change some source files,
+this simple shell command:
+.sp 1
+.RS
+.B make
+.RE
+.sp 1
+suffices to perform all necessary recompilations.
+The
+.B make
+program uses the makefile description and the last-modification times of the
+files to decide which of the files need to be updated.  For each of those
+files, it issues the commands recorded in the makefile.
+.LP
+.B make
+executes commands in the
+.I makefile
+to update one or more target
+.IR names ,
+where
+.I name
+is typically a program.
+If no
+.B \-f
+option is present,
+.B make
+will look for the makefiles
+.IR GNUmakefile ,
+.IR makefile ,
+and
+.IR Makefile ,
+in that order.
+.LP
+Normally you should call your makefile either
+.I makefile
+or
+.IR Makefile .
+(We recommend
+.I Makefile
+because it appears prominently near the beginning of a directory
+listing, right near other important files such as
+.IR  README .)
+The first name checked,
+.IR GNUmakefile ,
+is not recommended for most makefiles.  You should use this name if you have a
+makefile that is specific to GNU
+.BR make ,
+and will not be understood by other versions of
+.BR make .
+If
+.I makefile
+is '\-', the standard input is read.
+.LP
+.B make
+updates a target if it depends on prerequisite files
+that have been modified since the target was last modified,
+or if the target does not exist.
+.SH OPTIONS
+.sp 1
+.TP 0.5i
+\fB\-b\fR, \fB\-m\fR
+These options are ignored for compatibility with other versions of
+.BR make .
+.TP 0.5i
+\fB\-B\fR, \fB\-\-always\-make\fR
+Unconditionally make all targets.
+.TP 0.5i
+\fB\-C\fR \fIdir\fR, \fB\-\-directory\fR=\fIdir\fR
+Change to directory
+.I dir
+before reading the makefiles or doing anything else.
+If multiple
+.B \-C
+options are specified, each is interpreted relative to the
+previous one:
+.BR "\-C " /
+.BR "\-C " etc
+is equivalent to
+.BR "\-C " /etc.
+This is typically used with recursive invocations of
+.BR make .
+.TP 0.5i
+.B \-d
+Print debugging information in addition to normal processing.
+The debugging information says which files are being considered for
+remaking, which file-times are being compared and with what results,
+which files actually need to be remade, which implicit rules are
+considered and which are applied---everything interesting about how
+.B make
+decides what to do.
+.TP 0.5i
+.BI \-\-debug "[=FLAGS]"
+Print debugging information in addition to normal processing.
+If the
+.I FLAGS
+are omitted, then the behavior is the same as if
+.B \-d
+was specified.
+.I FLAGS
+may be
+.I a
+for all debugging output (same as using
+.BR \-d ),
+.I b
+for basic debugging,
+.I v
+for more verbose basic debugging,
+.I i
+for showing implicit rules,
+.I j
+for details on invocation of commands, and
+.I m
+for debugging while remaking makefiles.  Use
+.I n
+to disable all previous debugging flags.
+.TP 0.5i
+\fB\-e\fR, \fB\-\-environment\-overrides\fR
+Give variables taken from the environment precedence
+over variables from makefiles.
+.TP 0.5i
+\fB\-f\fR \fIfile\fR, \fB\-\-file\fR=\fIfile\fR, \fB\-\-makefile\fR=\fIFILE\fR
+Use
+.I file
+as a makefile.
+.TP 0.5i
+\fB\-i\fR, \fB\-\-ignore\-errors\fR
+Ignore all errors in commands executed to remake files.
+.TP 0.5i
+\fB\-I\fR \fIdir\fR, \fB\-\-include\-dir\fR=\fIdir\fR
+Specifies a directory
+.I dir
+to search for included makefiles.
+If several
+.B \-I
+options are used to specify several directories, the directories are
+searched in the order specified.
+Unlike the arguments to other flags of
+.BR make ,
+directories given with
+.B \-I
+flags may come directly after the flag:
+.BI \-I dir
+is allowed, as well as
+.B \-I
+.IR dir .
+This syntax is allowed for compatibility with the C
+preprocessor's
+.B \-I
+flag.
+.TP 0.5i
+\fB\-j\fR [\fIjobs\fR], \fB\-\-jobs\fR[=\fIjobs\fR]
+Specifies the number of
+.I jobs
+(commands) to run simultaneously.
+If there is more than one
+.B \-j
+option, the last one is effective.
+If the
+.B \-j
+option is given without an argument,
+.BR make
+will not limit the number of jobs that can run simultaneously.
+.TP 0.5i
+\fB\-k\fR, \fB\-\-keep\-going\fR
+Continue as much as possible after an error.
+While the target that failed, and those that depend on it, cannot
+be remade, the other dependencies of these targets can be processed
+all the same.
+.TP 0.5i
+\fB\-l\fR [\fIload\fR], \fB\-\-load\-average\fR[=\fIload\fR]
+Specifies that no new jobs (commands) should be started if there are
+others jobs running and the load average is at least
+.I load
+(a floating-point number).
+With no argument, removes a previous load limit.
+.TP 0.5i
+\fB\-L\fR, \fB\-\-check\-symlink\-times\fR
+Use the latest mtime between symlinks and target.
+.TP 0.5i
+\fB\-n\fR, \fB\-\-just\-print\fR, \fB\-\-dry\-run\fR, \fB\-\-recon\fR
+Print the commands that would be executed, but do not execute them (except in
+certain circumstances).
+.TP 0.5i
+\fB\-o\fR \fIfile\fR, \fB\-\-old\-file\fR=\fIfile\fR, \fB\-\-assume\-old\fR=\fIfile\fR
+Do not remake the file
+.I file
+even if it is older than its dependencies, and do not remake anything
+on account of changes in
+.IR file .
+Essentially the file is treated as very old and its rules are ignored.
+.TP 0.5i
+\fB\-O\fR[\fItype\fR], \fB\-\-output\-sync\fR[=\fItype\fR]
+When running multiple jobs in parallel with \fB-j\fR, ensure the output of
+each job is collected together rather than interspersed with output from
+other jobs.  If
+.I type
+is not specified or is
+.B target
+the output from the entire recipe for each target is grouped together.  If
+.I type
+is
+.B line
+the output from each command line within a recipe is grouped together.
+If
+.I type
+is
+.B recurse
+output from an entire recursive make is grouped together.  If
+.I type
+is
+.B none
+output synchronization is disabled.
+.TP 0.5i
+\fB\-p\fR, \fB\-\-print\-data\-base\fR
+Print the data base (rules and variable values) that results from
+reading the makefiles; then execute as usual or as otherwise
+specified.
+This also prints the version information given by the
+.B \-v
+switch (see below).
+To print the data base without trying to remake any files, use
+.IR "make \-p \-f/dev/null" .
+.TP 0.5i
+\fB\-q\fR, \fB\-\-question\fR
+``Question mode''.
+Do not run any commands, or print anything; just return an exit status
+that is zero if the specified targets are already up to date, nonzero
+otherwise.
+.TP 0.5i
+\fB\-r\fR, \fB\-\-no\-builtin\-rules\fR
+Eliminate use of the built\-in implicit rules.
+Also clear out the default list of suffixes for suffix rules.
+.TP 0.5i
+\fB\-R\fR, \fB\-\-no\-builtin\-variables\fR
+Don't define any built\-in variables.
+.TP 0.5i
+\fB\-s\fR, \fB\-\-silent\fR, \fB\-\-quiet\fR
+Silent operation; do not print the commands as they are executed.
+.TP 0.5i
+\fB\-S\fR, \fB\-\-no\-keep\-going\fR, \fB\-\-stop\fR
+Cancel the effect of the
+.B \-k
+option.
+This is never necessary except in a recursive
+.B make
+where
+.B \-k
+might be inherited from the top-level
+.B make
+via MAKEFLAGS or if you set
+.B \-k
+in MAKEFLAGS in your environment.
+.TP 0.5i
+\fB\-t\fR, \fB\-\-touch\fR
+Touch files (mark them up to date without really changing them)
+instead of running their commands.
+This is used to pretend that the commands were done, in order to fool
+future invocations of
+.BR make .
+.TP 0.5i
+.B \-\-trace
+Information about the disposition of each target is printed (why the target is
+being rebuilt and what commands are run to rebuild it).
+.TP 0.5i
+\fB\-v\fR, \fB\-\-version\fR
+Print the version of the
+.B make
+program plus a copyright, a list of authors and a notice that there
+is no warranty.
+.TP 0.5i
+\fB\-w\fR, \fB\-\-print\-directory\fR
+Print a message containing the working directory
+before and after other processing.
+This may be useful for tracking down errors from complicated nests of
+recursive
+.B make
+commands.
+.TP 0.5i
+.B \-\-no\-print\-directory
+Turn off
+.BR \-w ,
+even if it was turned on implicitly.
+.TP 0.5i
+\fB\-W\fR \fIfile\fR, \fB\-\-what\-if\fR=\fIfile\fR, \fB\-\-new\-file\fR=\fIfile\fR, \fB\-\-assume\-new\fR=\fIfile\fR
+Pretend that the target
+.I file
+has just been modified.
+When used with the
+.B \-n
+flag, this shows you what would happen if you were to modify that file.
+Without
+.BR \-n ,
+it is almost the same as running a
+.I touch
+command on the given file before running
+.BR make ,
+except that the modification time is changed only in the imagination of
+.BR make .
+.TP 0.5i
+.B \-\-warn\-undefined\-variables
+Warn when an undefined variable is referenced.
+.SH "EXIT STATUS"
+GNU
+.B make
+exits with a status of zero if all makefiles were successfully parsed
+and no targets that were built failed.  A status of one will be returned
+if the
+.B \-q
+flag was used and
+.B make
+determines that a target needs to be rebuilt.  A status of two will be
+returned if any errors were encountered.
+.SH "SEE ALSO"
+The full documentation for
+.B make
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B make
+programs are properly installed at your site, the command
+.IP
+.B info make
+.PP
+should give you access to the complete manual.
+.SH BUGS
+See the chapter ``Problems and Bugs'' in
+.IR "The GNU Make Manual" .
+.SH AUTHOR
+This manual page contributed by Dennis Morse of Stanford University.
+Further updates contributed by Mike Frysinger.  It has been reworked by Roland
+McGrath.  Maintained by Paul Smith.
+.SH "COPYRIGHT"
+Copyright \(co 1992-1993, 1996-2014 Free Software Foundation, Inc.
+This file is part of
+.IR "GNU make" .
+.LP
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+.LP
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+.LP
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see
+.IR http://www.gnu.org/licenses/ .
diff --git a/make.lnk b/make.lnk
new file mode 100644
index 0000000..0d983bf
--- /dev/null
+++ b/make.lnk
@@ -0,0 +1,5 @@
+FROM LIB:cres.o "commands.o"+"job.o"+"dir.o"+"file.o"+"misc.o"+"main.o"+"read.o"+"remake.o"+"rule.o"+"implicit.o"+"default.o"+"variable.o"+"expand.o"+"function.o"+"vpath.o"+"version.o"+"ar.o"+"arscan.o"+"signame.o"+"remote-stub.o"+"getopt.o"+"getopt1.o"+"alloca.o"+"amiga.o"+"hash.o"+"strcache.o"+"output.o"
+TO "make.new"
+LIB glob/glob.lib LIB:sc.lib LIB:amiga.lib
+QUIET
+
diff --git a/make_msvc_net2003.sln b/make_msvc_net2003.sln
new file mode 100644
index 0000000..e993896
--- /dev/null
+++ b/make_msvc_net2003.sln
@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00

+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "make_msvc.net2003", "make_msvc_net2003.vcproj", "{E96B5060-3240-4723-91C9-E64F1C877A04}"

+	ProjectSection(ProjectDependencies) = postProject

+	EndProjectSection

+EndProject

+Global

+	GlobalSection(SolutionConfiguration) = preSolution

+		Debug = Debug

+		Release = Release

+	EndGlobalSection

+	GlobalSection(ProjectConfiguration) = postSolution

+		{E96B5060-3240-4723-91C9-E64F1C877A04}.Debug.ActiveCfg = Debug|Win32

+		{E96B5060-3240-4723-91C9-E64F1C877A04}.Debug.Build.0 = Debug|Win32

+		{E96B5060-3240-4723-91C9-E64F1C877A04}.Release.ActiveCfg = Release|Win32

+		{E96B5060-3240-4723-91C9-E64F1C877A04}.Release.Build.0 = Release|Win32

+	EndGlobalSection

+	GlobalSection(ExtensibilityGlobals) = postSolution

+	EndGlobalSection

+	GlobalSection(ExtensibilityAddIns) = postSolution

+	EndGlobalSection

+EndGlobal

diff --git a/make_msvc_net2003.vcproj b/make_msvc_net2003.vcproj
new file mode 100644
index 0000000..01b1f0d
--- /dev/null
+++ b/make_msvc_net2003.vcproj
@@ -0,0 +1,337 @@
+<?xml version="1.0" encoding="Windows-1252"?>

+<VisualStudioProject

+	ProjectType="Visual C++"

+	Version="7.10"

+	Name="make_msvc.net2003"

+	ProjectGUID="{E96B5060-3240-4723-91C9-E64F1C877A04}"

+	Keyword="Win32Proj">

+	<Platforms>

+		<Platform

+			Name="Win32"/>

+	</Platforms>

+	<Configurations>

+		<Configuration

+			Name="Debug|Win32"

+			OutputDirectory="Debug"

+			IntermediateDirectory="Debug"

+			ConfigurationType="1"

+			CharacterSet="2">

+			<Tool

+				Name="VCCLCompilerTool"

+				Optimization="0"

+				AdditionalIncludeDirectories=".;w32/include;glob"

+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;HAVE_CONFIG_H=1;WINDOWS32=1"

+				MinimalRebuild="TRUE"

+				BasicRuntimeChecks="3"

+				RuntimeLibrary="1"

+				ForceConformanceInForLoopScope="TRUE"

+				UsePrecompiledHeader="0"

+				WarningLevel="4"

+				SuppressStartupBanner="TRUE"

+				Detect64BitPortabilityProblems="FALSE"

+				DebugInformationFormat="4"/>

+			<Tool

+				Name="VCCustomBuildTool"/>

+			<Tool

+				Name="VCLinkerTool"

+				OutputFile="$(OutDir)/make_msvc.net2003.exe"

+				LinkIncremental="2"

+				GenerateDebugInformation="TRUE"

+				ProgramDatabaseFile="$(OutDir)/make_msvc.net2003.pdb"

+				SubSystem="1"

+				TargetMachine="1"/>

+			<Tool

+				Name="VCMIDLTool"/>

+			<Tool

+				Name="VCPostBuildEventTool"/>

+			<Tool

+				Name="VCPreBuildEventTool"

+				Description="Copying config.h.W32 to config.h"

+				CommandLine="if not exist config.h copy config.h.W32 config.h"/>

+			<Tool

+				Name="VCPreLinkEventTool"/>

+			<Tool

+				Name="VCResourceCompilerTool"/>

+			<Tool

+				Name="VCWebServiceProxyGeneratorTool"/>

+			<Tool

+				Name="VCXMLDataGeneratorTool"/>

+			<Tool

+				Name="VCWebDeploymentTool"/>

+			<Tool

+				Name="VCManagedWrapperGeneratorTool"/>

+			<Tool

+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>

+		</Configuration>

+		<Configuration

+			Name="Release|Win32"

+			OutputDirectory="Release"

+			IntermediateDirectory="Release"

+			ConfigurationType="1"

+			CharacterSet="2">

+			<Tool

+				Name="VCCLCompilerTool"

+				AdditionalIncludeDirectories=".;w32/include;glob"

+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H=1;WINDOWS32=1"

+				RuntimeLibrary="0"

+				ForceConformanceInForLoopScope="TRUE"

+				UsePrecompiledHeader="0"

+				WarningLevel="4"

+				Detect64BitPortabilityProblems="FALSE"

+				DebugInformationFormat="3"/>

+			<Tool

+				Name="VCCustomBuildTool"/>

+			<Tool

+				Name="VCLinkerTool"

+				OutputFile="$(OutDir)/make_msvc.net2003.exe"

+				LinkIncremental="1"

+				GenerateDebugInformation="TRUE"

+				SubSystem="1"

+				OptimizeReferences="2"

+				EnableCOMDATFolding="2"

+				TargetMachine="1"/>

+			<Tool

+				Name="VCMIDLTool"/>

+			<Tool

+				Name="VCPostBuildEventTool"/>

+			<Tool

+				Name="VCPreBuildEventTool"

+				Description="Copying config.h.W32 to config.h"

+				CommandLine="if not exist config.h copy config.h.W32 config.h"/>

+			<Tool

+				Name="VCPreLinkEventTool"/>

+			<Tool

+				Name="VCResourceCompilerTool"/>

+			<Tool

+				Name="VCWebServiceProxyGeneratorTool"/>

+			<Tool

+				Name="VCXMLDataGeneratorTool"/>

+			<Tool

+				Name="VCWebDeploymentTool"/>

+			<Tool

+				Name="VCManagedWrapperGeneratorTool"/>

+			<Tool

+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>

+		</Configuration>

+	</Configurations>

+	<References>

+	</References>

+	<Files>

+		<Filter

+			Name="src"

+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"

+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}">

+			<File

+				RelativePath=".\ar.c">

+			</File>

+			<File

+				RelativePath=".\arscan.c">

+			</File>

+			<File

+				RelativePath=".\commands.c">

+			</File>

+			<File

+				RelativePath=".\default.c">

+			</File>

+			<File

+				RelativePath=".\dir.c">

+			</File>

+			<File

+				RelativePath=".\expand.c">

+			</File>

+			<File

+				RelativePath=".\file.c">

+			</File>

+			<File

+				RelativePath=".\function.c">

+			</File>

+			<File

+				RelativePath=".\getloadavg.c">

+			</File>

+			<File

+				RelativePath=".\getopt.c">

+			</File>

+			<File

+				RelativePath=".\getopt1.c">

+			</File>

+

+			<File

+				RelativePath=".\guile.c">

+			</File>

+

+			<File

+				RelativePath=".\hash.c">

+			</File>

+			<File

+				RelativePath=".\strcache.c">

+			</File>

+			<File

+				RelativePath=".\implicit.c">

+			</File>

+			<File

+				RelativePath=".\job.c">

+			</File>

+			<File

+				RelativePath=".\load.c">

+			</File>

+			<File

+				RelativePath=".\output.c">

+			</File>

+			<File

+				RelativePath=".\main.c">

+			</File>

+			<File

+				RelativePath=".\misc.c">

+			</File>

+			<File

+				RelativePath=".\read.c">

+			</File>

+			<File

+				RelativePath=".\remake.c">

+			</File>

+			<File

+				RelativePath=".\remote-stub.c">

+			</File>

+			<File

+				RelativePath=".\rule.c">

+			</File>

+			<File

+				RelativePath=".\signame.c">

+			</File>

+			<File

+				RelativePath=".\variable.c">

+			</File>

+			<File

+				RelativePath=".\version.c">

+			</File>

+			<File

+				RelativePath=".\vpath.c">

+			</File>

+			<Filter

+				Name="w32"

+				Filter="">

+				<File

+					RelativePath=".\w32\compat\dirent.c">

+				</File>

+				<File

+					RelativePath=".\w32\compat\posixfcn.c">

+				</File>

+				<File

+					RelativePath=".\w32\subproc\misc.c">

+					<FileConfiguration

+						Name="Debug|Win32">

+						<Tool

+							Name="VCCLCompilerTool"

+							ObjectFile="$(IntDir)/$(InputName)1.obj"/>

+					</FileConfiguration>

+					<FileConfiguration

+						Name="Release|Win32">

+						<Tool

+							Name="VCCLCompilerTool"

+							ObjectFile="$(IntDir)/$(InputName)1.obj"/>

+					</FileConfiguration>

+				</File>

+				<File

+					RelativePath=".\w32\pathstuff.c">

+				</File>

+				<File

+					RelativePath=".\w32\subproc\sub_proc.c">

+				</File>

+				<File

+					RelativePath=".\w32\subproc\w32err.c">

+				</File>

+			</Filter>

+			<Filter

+				Name="glob"

+				Filter="">

+				<File

+					RelativePath=".\glob\fnmatch.c">

+				</File>

+				<File

+					RelativePath=".\glob\glob.c">

+				</File>

+			</Filter>

+		</Filter>

+		<Filter

+			Name="include"

+			Filter="h;hpp;hxx;hm;inl;inc;xsd"

+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}">

+			<File

+				RelativePath=".\commands.h">

+			</File>

+			<File

+				RelativePath=".\config.h">

+			</File>

+			<File

+				RelativePath=".\debug.h">

+			</File>

+			<File

+				RelativePath=".\dep.h">

+			</File>

+			<File

+				RelativePath=".\filedef.h">

+			</File>

+			<File

+				RelativePath=".\getopt.h">

+			</File>

+			<File

+				RelativePath=".\gettext.h">

+			</File>

+			<File

+				RelativePath=".\gmk-default.h">

+			</File>

+			<File

+				RelativePath=".\hash.h">

+			</File>

+			<File

+				RelativePath=".\job.h">

+			</File>

+			<File

+				RelativePath=".\output.h">

+			</File>

+			<File

+				RelativePath=".\makeint.h">

+			</File>

+			<File

+				RelativePath=".\rule.h">

+			</File>

+			<File

+				RelativePath=".\variable.h">

+			</File>

+			<File

+				RelativePath=".\vmsdir.h">

+			</File>

+			<Filter

+				Name="w32"

+				Filter="">

+				<File

+					RelativePath=".\w32\include\dirent.h">

+				</File>

+				<File

+					RelativePath=".\w32\include\pathstuff.h">

+				</File>

+				<File

+					RelativePath=".\w32\subproc\proc.h">

+				</File>

+				<File

+					RelativePath=".\w32\include\sub_proc.h">

+				</File>

+				<File

+					RelativePath=".\w32\include\w32err.h">

+				</File>

+			</Filter>

+			<Filter

+				Name="glob"

+				Filter="">

+				<File

+					RelativePath=".\glob\fnmatch.h">

+				</File>

+				<File

+					RelativePath=".\glob\glob.h">

+				</File>

+			</Filter>

+		</Filter>

+	</Files>

+	<Globals>

+	</Globals>

+</VisualStudioProject>

diff --git a/makefile.com b/makefile.com
new file mode 100644
index 0000000..fe37c05
--- /dev/null
+++ b/makefile.com
@@ -0,0 +1,163 @@
+$!
+$! Makefile.com - builds GNU Make for VMS
+$!
+$! P1 = LIST will provide compiler listings.
+$! P2 = DEBUG will build an image with debug information
+$! P3 = WALL will enable all warning messages (some are suppressed since
+$!      one macro intentionally causes an error condition)
+$!
+$! In case of problems with the install you might contact me at
+$! zinser@decus.de (preferred) or zinser@sysdev.deutsche-boerse.com
+$
+$! hb
+$! But don't ask Martin Zinser about the lines, I added/changed.
+$! In case of an error do some cleanup
+$ on error then $ goto cleanup
+$! in case somebody set up her/his own symbol for cc
+$ set symbol/scope=(nolocal,noglobal)
+$!
+$! Just some general constants...
+$!
+$ true  = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ tt = tmpnam + ".txt"
+$ tc = tmpnam + ".c"
+$!
+$! Look for the compiler used
+$!
+$ lval = ""
+$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$  then
+$   if f$trnlnm("SYS").eqs."" then def/nolog sys sys$library:
+$   ccopt = ""
+$  else
+$   ccopt = "/decc/prefix=(all,except=(globfree,glob))"
+$   if f$trnlnm("SYS").eqs.""
+$    then
+$     if f$trnlnm("DECC$LIBRARY_INCLUDE").nes.""
+$      then
+$       define sys decc$library_include:
+$      else
+$       if f$search("SYS$COMMON:[DECC$LIB.REFERENCE]DECC$RTLDEF.DIR").nes."" -
+           then lval = "SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF],"
+$       if f$search("SYS$COMMON:[DECC$LIB.REFERENCE]SYS$STARLET_C.DIR").nes."" -
+           then lval = lval+"SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C],"
+$       lval=lval+"SYS$LIBRARY:"
+$       define sys 'lval
+$      endif
+$   endif
+$ endif
+$!
+$!
+$ if (p1 .eqs. "LIST")
+$ then
+$   ccopt = ccopt + "/list/show=(expan,inclu)"
+$ endif
+$!
+$! Should we build a debug image
+$!
+$ if (p2.eqs."DEBUG")
+$  then
+$   ccopt = ccopt + "/noopt/debug"
+$   lopt = "/debug"
+$ else
+$   lopt = ""
+$ endif
+$!
+$! Do we want to see all warnings
+$!
+$ if (p3.nes."WALL")
+$ then
+$   gosub check_cc_qual
+$ endif
+$ filelist = "alloca ar arscan commands default dir expand file function " + -
+             "guile hash implicit job load main misc read remake " + -
+             "remote-stub rule output signame variable version " + -
+             "vmsfunctions vmsify vpath " + -
+	     "[.glob]glob [.glob]fnmatch getopt1 getopt strcache"
+$!
+$ copy config.h-vms config.h
+$ n=0
+$ open/write optf make.opt
+$ loop:
+$ cfile = f$elem(n," ",filelist)
+$ if cfile .eqs. " " then goto linkit
+$ write sys$output "Compiling ''cfile'..."
+$ call compileit 'cfile'
+$ n = n + 1
+$ goto loop
+$ linkit:
+$ close optf
+$ link/exe=make make.opt/opt'lopt
+$ goto cleanup
+$
+$ cleanup:
+$ if f$trnlnm("SYS").nes."" then $ deassign sys
+$ if f$trnlnm("OPTF").nes."" then $ close optf
+$ if f$search("make.opt").nes."" then $ del make.opt;*
+$ exit
+$!
+$!-----------------------------------------------------------------------------
+$!
+$! Check if this is a define relating to the properties of the C/C++
+$! compiler
+$!
+$CHECK_CC_QUAL:
+$ open/write tmpc 'tc
+$ ccqual = "/warn=(disable=questcompare)"
+$ write tmpc "#include <stdio.h>"
+$ write tmpc "unsigned int i = 1;"
+$ write tmpc "int main(){"
+$ write tmpc "if (i < 0){printf(""Mission impossible\n"");}}"
+$ close tmpc
+$ gosub cc_qual_check
+$ return
+$!
+$!-----------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler
+$!
+$CC_QUAL_CHECK:
+$ cc_qual = false
+$ set message/nofac/noident/nosever/notext
+$ cc 'ccqual' 'tmpnam'
+$ if $status then cc_qual = true
+$ set message/fac/ident/sever/text
+$ delete/nolog 'tmpnam'.*;*
+$ if cc_qual then ccopt = ccopt + ccqual
+$ return
+$!-----------------------------------------------------------------------------
+$!
+$ compileit : subroutine
+$ ploc = f$locate("]",p1)
+$ if ploc .lt. f$length(p1)
+$ then
+$   objdir = f$extract(0, ploc+1, p1)
+$   write optf p1
+$ else
+$   objdir := []
+$   write optf objdir+p1
+$ endif
+$ cc'ccopt'/include=([],[.glob])/obj='objdir' -
+  /define=("allocated_variable_expand_for_file=alloc_var_expand_for_file","unlink=remove","HAVE_CONFIG_H","VMS") -
+  'p1'
+$ exit
+$ endsubroutine : compileit
+$!
+$!-----------------------------------------------------------------------------
+$!Copyright (C) 1996-2014 Free Software Foundation, Inc.
+$!This file is part of GNU Make.
+$!
+$!GNU Make is free software; you can redistribute it and/or modify it under
+$!the terms of the GNU General Public License as published by the Free Software
+$!Foundation; either version 3 of the License, or (at your option) any later
+$!version.
+$!
+$!GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+$!WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+$!FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+$!details.
+$!
+$!You should have received a copy of the GNU General Public License along with
+$!this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/makefile.vms b/makefile.vms
new file mode 100644
index 0000000..ad5ded7
--- /dev/null
+++ b/makefile.vms
@@ -0,0 +1,173 @@
+# -*-Makefile-*- to build GNU make on VMS
+#
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# VMS extensions from GNU Make 3.60 imported by
+#  Klaus Kämpf (kkaempf@rmi.de)
+# Modified for version 3.78.1 by Hartmut.Becker@compaq.com.
+# Modified for version 3.80 by zinser@decus.de
+# Modified for versions 3.81, 3.99.90 by Hartmut Becker
+
+CC = cc
+CP = copy
+
+%.obj: %.c
+	$(CC) $(CFLAGS)/obj=$@ $<
+#
+#	Makefile for GNU Make
+#
+
+ifeq ($(CC),cc)
+CFLAGS = $(defines) /include=([],[.glob])/prefix=(all,except=(glob,globfree))/standard=relaxed/warn=(disable=questcompare)
+else
+CFLAGS = $(defines) /include=([],[.glob])
+endif
+#LDFLAGS = /deb
+LDFLAGS =
+
+ifeq ($(CC),cc)
+defines = /define=("unlink=remove","HAVE_CONFIG_H","VMS","allocated_variable_expand_for_file=alloc_var_expand_for_file")
+else
+ifeq ($(ARCH),VAX)
+defines = /define=("HAVE_CONFIG_H","GCC_IS_NATIVE","VAX")
+else
+defines = /define=("HAVE_CONFIG_H","GCC_IS_NATIVE")
+endif
+endif
+
+LOAD_AVG = /define="NO_LDAV"
+
+# If you don't want archive support, comment these out.
+ARCHIVES = ,ar.obj,arscan.obj
+ARCHIVES_SRC = ar.c arscan.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.
+# if on vax, uncomment the following line
+#LOADLIBES = ,c.opt/opt
+ifeq ($(CC),cc)
+#LOADLIBES =,sys$$library:vaxcrtl.olb/lib
+CRT0 =
+else
+LOADLIBES =,gnu_cc_library:libgcc.olb/lib
+endif
+
+# If your system doesn't have alloca, or the one provided is bad,
+# get it from the Emacs distribution and define these.
+#ALLOCA = ,alloca.obj
+#ALLOCASRC = alloca.c
+
+# If there are remote execution facilities defined,
+# enable them with switches here (see remote-*.c).
+REMOTE =
+
+# Any extra object files your system needs.
+extras = ,signame.obj,remote-stub.obj,vmsfunctions.obj,vmsify.obj
+#,directory.obj
+# as an alternative:
+glob = ,[.glob]glob.obj,[.glob]fnmatch.obj
+getopt = ,getopt.obj,getopt1.obj
+# Directory to install 'make' in.
+bindir = []
+# Directory to install the man page in.
+mandir = []
+# Number to put on the man page filename.
+manext = 1
+
+guile = ,guile.obj
+
+objs = commands.obj,job.obj,output.obj,dir.obj,file.obj,misc.obj,hash.obj,\
+       load.obj,main.obj,read.obj,remake.obj,rule.obj,implicit.obj,\
+       default.obj,variable.obj,expand.obj,function.obj,strcache.obj,\
+       vpath.obj,version.obj$(guile)\
+       $(ARCHIVES)$(ALLOCA)$(extras)$(getopt)$(glob)
+
+srcs = commands.c job.c output.c dir.c file.c misc.c guile.c hash.c \
+	load.c main.c read.c remake.c rule.c implicit.c \
+	default.c variable.c expand.c function.c strcache.c \
+	vpath.c version.c vmsfunctions.c vmsify.c $(ARCHIVES_SRC) $(ALLOCASRC) \
+	commands.h dep.h filedef.h job.h output.h makeint.h rule.h variable.h
+
+
+.PHONY: all doc
+all: config.h make.exe
+
+doc: make.info make.dvi
+
+
+make.exe: $(objs)
+	$(LD)$(LDFLAGS)/exe=$@ $^$(LOADLIBES)$(CRT0)
+
+.PHONY: clean realclean
+clean:
+	-purge [...]
+	-$(RM) make.exe;,*.obj;
+	-$(RM) [.glob]*.obj;
+
+ar.obj: ar.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h dep.h \
+     [.glob]fnmatch.h
+arscan.obj: arscan.c makeint.h config.h gnumake.h gettext.h
+commands.obj: commands.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h dep.h variable.h job.h output.h commands.h
+default.obj: default.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h variable.h rule.h dep.h job.h output.h commands.h
+dir.obj: dir.c makeint.h config.h gnumake.h gettext.h hash.h filedef.h \
+     dep.h [.glob]glob.h
+expand.obj: expand.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h job.h output.h commands.h variable.h rule.h
+file.obj: file.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h job.h output.h commands.h variable.h debug.h
+[.glob]fnmatch.obj: [.glob]fnmatch.c config.h [.glob]fnmatch.h
+function.obj: function.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h variable.h dep.h job.h output.h commands.h debug.h
+getopt.obj: getopt.c config.h gettext.h getopt.h
+getopt1.obj: getopt1.c config.h getopt.h
+[.glob]glob.obj: [.glob]glob.c config.h [.glob]fnmatch.h [.glob]glob.h
+guile.obj: guile.c makeint.h config.h gnumake.h gettext.h
+hash.obj: hash.c makeint.h config.h gnumake.h gettext.h hash.h
+implicit.obj: implicit.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h rule.h dep.h debug.h variable.h job.h output.h commands.h
+job.obj: job.c makeint.h config.h gnumake.h gettext.h job.h output.h debug.h \
+     filedef.h hash.h commands.h variable.h debug.h vmsjobs.c
+load.obj: load.c makeint.h config.h gnumake.h gettext.h
+main.obj: main.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h variable.h job.h output.h commands.h rule.h debug.h getopt.h
+misc.obj: misc.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h debug.h
+output.obj: output.c makeint.h config.h gnumake.h gettext.h job.h output.h
+read.obj: read.c makeint.h config.h gnumake.h gettext.h [.glob]glob.h \
+     filedef.h hash.h dep.h job.h output.h commands.h variable.h rule.h \
+     debug.h
+remake.obj: remake.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h job.h output.h commands.h dep.h variable.h debug.h
+remote-stub.obj: remote-stub.c makeint.h config.h gnumake.h gettext.h \
+     filedef.h hash.h job.h output.h commands.h
+rule.obj: rule.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h job.h output.h commands.h variable.h rule.h
+signame.obj: signame.c makeint.h config.h gnumake.h gettext.h
+strcache.obj: strcache.c makeint.h config.h gnumake.h gettext.h hash.h
+variable.obj: variable.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h dep.h job.h output.h commands.h variable.h rule.h
+version.obj: version.c config.h
+vmsfunctions.obj: vmsfunctions.c makeint.h config.h gnumake.h gettext.h \
+     debug.h job.h output.h vmsdir.h
+vmsify.obj: vmsify.c
+vpath.obj: vpath.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     variable.h
+
+config.h: config.h-vms
+	$(CP) $< $@
diff --git a/makeint.h b/makeint.h
new file mode 100644
index 0000000..fdcae75
--- /dev/null
+++ b/makeint.h
@@ -0,0 +1,714 @@
+/* Miscellaneous global declarations and portability cruft for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* We use <config.h> instead of "config.h" so that a compilation
+   using -I. -I$srcdir will use ./config.h rather than $srcdir/config.h
+   (which it would do because makeint.h was found in $srcdir).  */
+#include <config.h>
+#undef  HAVE_CONFIG_H
+#define HAVE_CONFIG_H 1
+
+/* Specify we want GNU source code.  This must be defined before any
+   system headers are included.  */
+
+#define _GNU_SOURCE 1
+
+/* AIX requires this to be the first thing in the file.  */
+#if HAVE_ALLOCA_H
+# include <alloca.h>
+#else
+# ifdef _AIX
+ #pragma alloca
+# else
+#  if !defined(__GNUC__) && !defined(WINDOWS32)
+#   ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#   endif
+#  endif
+# endif
+#endif
+
+/* Disable assert() unless we're a maintainer.
+   Some asserts are compute-intensive.  */
+#ifndef MAKE_MAINTAINER_MODE
+# define NDEBUG 1
+#endif
+
+/* Include the externally-visible content.
+   Be sure to use the local one, and not one installed on the system.
+   Define GMK_BUILDING_MAKE for proper selection of dllexport/dllimport
+   declarations for MS-Windows.  */
+#ifdef WINDOWS32
+# define GMK_BUILDING_MAKE
+#endif
+#include "gnumake.h"
+
+#ifdef  CRAY
+/* This must happen before #include <signal.h> so
+   that the declaration therein is changed.  */
+# define signal bsdsignal
+#endif
+
+/* If we're compiling for the dmalloc debugger, turn off string inlining.  */
+#if defined(HAVE_DMALLOC_H) && defined(__GNUC__)
+# define __NO_STRING_INLINES
+#endif
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <signal.h>
+#include <stdio.h>
+#include <ctype.h>
+
+#ifdef HAVE_SYS_TIMEB_H
+/* SCO 3.2 "devsys 4.2" has a prototype for 'ftime' in <time.h> that bombs
+   unless <sys/timeb.h> has been included first.  */
+# include <sys/timeb.h>
+#endif
+#if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# if HAVE_SYS_TIME_H
+#  include <sys/time.h>
+# else
+#  include <time.h>
+# endif
+#endif
+
+#include <errno.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#ifndef isblank
+# define isblank(c)     ((c) == ' ' || (c) == '\t')
+#endif
+
+#ifdef  HAVE_UNISTD_H
+# include <unistd.h>
+/* Ultrix's unistd.h always defines _POSIX_VERSION, but you only get
+   POSIX.1 behavior with 'cc -YPOSIX', which predefines POSIX itself!  */
+# if defined (_POSIX_VERSION) && !defined (ultrix) && !defined (VMS)
+#  define POSIX 1
+# endif
+#endif
+
+/* Some systems define _POSIX_VERSION but are not really POSIX.1.  */
+#if (defined (butterfly) || defined (__arm) || (defined (__mips) && defined (_SYSTYPE_SVR3)) || (defined (sequent) && defined (i386)))
+# undef POSIX
+#endif
+
+#if !defined (POSIX) && defined (_AIX) && defined (_POSIX_SOURCE)
+# define POSIX 1
+#endif
+
+#ifndef RETSIGTYPE
+# define RETSIGTYPE     void
+#endif
+
+#ifndef sigmask
+# define sigmask(sig)   (1 << ((sig) - 1))
+#endif
+
+#ifndef HAVE_SA_RESTART
+# define SA_RESTART 0
+#endif
+
+#ifdef  HAVE_LIMITS_H
+# include <limits.h>
+#endif
+#ifdef  HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+
+#ifndef PATH_MAX
+# ifndef POSIX
+#  define PATH_MAX      MAXPATHLEN
+# endif
+#endif
+#ifndef MAXPATHLEN
+# define MAXPATHLEN 1024
+#endif
+
+#ifdef  PATH_MAX
+# define GET_PATH_MAX   PATH_MAX
+# define PATH_VAR(var)  char var[PATH_MAX]
+#else
+# define NEED_GET_PATH_MAX 1
+# define GET_PATH_MAX   (get_path_max ())
+# define PATH_VAR(var)  char *var = alloca (GET_PATH_MAX)
+unsigned int get_path_max (void);
+#endif
+
+#ifndef CHAR_BIT
+# define CHAR_BIT 8
+#endif
+
+#ifndef USHRT_MAX
+# define USHRT_MAX 65535
+#endif
+
+/* Nonzero if the integer type T is signed.
+   Use <= to avoid GCC warnings about always-false expressions.  */
+#define INTEGER_TYPE_SIGNED(t) ((t) -1 <= 0)
+
+/* The minimum and maximum values for the integer type T.
+   Use ~ (t) 0, not -1, for portability to 1's complement hosts.  */
+#define INTEGER_TYPE_MINIMUM(t) \
+  (! INTEGER_TYPE_SIGNED (t) ? (t) 0 : ~ (t) 0 << (sizeof (t) * CHAR_BIT - 1))
+#define INTEGER_TYPE_MAXIMUM(t) (~ (t) 0 - INTEGER_TYPE_MINIMUM (t))
+
+#ifndef CHAR_MAX
+# define CHAR_MAX INTEGER_TYPE_MAXIMUM (char)
+#endif
+
+#ifdef STAT_MACROS_BROKEN
+# ifdef S_ISREG
+#  undef S_ISREG
+# endif
+# ifdef S_ISDIR
+#  undef S_ISDIR
+# endif
+#endif  /* STAT_MACROS_BROKEN.  */
+
+#ifndef S_ISREG
+# define S_ISREG(mode)  (((mode) & S_IFMT) == S_IFREG)
+#endif
+#ifndef S_ISDIR
+# define S_ISDIR(mode)  (((mode) & S_IFMT) == S_IFDIR)
+#endif
+
+#ifdef VMS
+# include <fcntl.h>
+# include <types.h>
+# include <unixlib.h>
+# include <unixio.h>
+# include <perror.h>
+/* Needed to use alloca on VMS.  */
+# include <builtins.h>
+#endif
+
+#ifndef __attribute__
+/* This feature is available in gcc versions 2.5 and later.  */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
+#  define __attribute__(x)
+# endif
+/* The __-protected variants of 'format' and 'printf' attributes
+   are accepted by gcc versions 2.6.4 (effectively 2.7) and later.  */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7)
+#  define __format__ format
+#  define __printf__ printf
+# endif
+#endif
+#define UNUSED  __attribute__ ((unused))
+
+#if defined (STDC_HEADERS) || defined (__GNU_LIBRARY__)
+# include <stdlib.h>
+# include <string.h>
+# define ANSI_STRING 1
+#else   /* No standard headers.  */
+# ifdef HAVE_STRING_H
+#  include <string.h>
+#  define ANSI_STRING 1
+# else
+#  include <strings.h>
+# endif
+# ifdef HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# else
+void *malloc (int);
+void *realloc (void *, int);
+void free (void *);
+
+void abort (void) __attribute__ ((noreturn));
+void exit (int) __attribute__ ((noreturn));
+# endif /* HAVE_STDLIB_H.  */
+
+#endif /* Standard headers.  */
+
+/* These should be in stdlib.h.  Make sure we have them.  */
+#ifndef EXIT_SUCCESS
+# define EXIT_SUCCESS 0
+#endif
+#ifndef EXIT_FAILURE
+# define EXIT_FAILURE 1
+#endif
+
+#ifndef  ANSI_STRING
+
+/* SCO Xenix has a buggy macro definition in <string.h>.  */
+#undef  strerror
+#if !defined(__DECC)
+char *strerror (int errnum);
+#endif
+
+#endif  /* !ANSI_STRING.  */
+#undef  ANSI_STRING
+
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#define FILE_TIMESTAMP uintmax_t
+
+#if !defined(HAVE_STRSIGNAL)
+char *strsignal (int signum);
+#endif
+
+/* ISDIGIT offers the following features:
+   - Its arg may be any int or unsigned int; it need not be an unsigned char.
+   - It's guaranteed to evaluate its argument exactly once.
+      NOTE!  Make relies on this behavior, don't change it!
+   - It's typically faster.
+   POSIX 1003.2-1992 section 2.5.2.1 page 50 lines 1556-1558 says that
+   only '0' through '9' are digits.  Prefer ISDIGIT to isdigit() unless
+   it's important to use the locale's definition of 'digit' even when the
+   host does not conform to POSIX.  */
+#define ISDIGIT(c) ((unsigned) (c) - '0' <= 9)
+
+/* Test if two strings are equal. Is this worthwhile?  Should be profiled.  */
+#define streq(a, b) \
+   ((a) == (b) || \
+    (*(a) == *(b) && (*(a) == '\0' || !strcmp ((a) + 1, (b) + 1))))
+
+/* Test if two strings are equal, but match case-insensitively on systems
+   which have case-insensitive filesystems.  Should only be used for
+   filenames!  */
+#ifdef HAVE_CASE_INSENSITIVE_FS
+# define patheq(a, b) \
+    ((a) == (b) \
+     || (tolower((unsigned char)*(a)) == tolower((unsigned char)*(b)) \
+         && (*(a) == '\0' || !strcasecmp ((a) + 1, (b) + 1))))
+#else
+# define patheq(a, b) streq(a, b)
+#endif
+
+#define strneq(a, b, l) (strncmp ((a), (b), (l)) == 0)
+
+#if defined(__GNUC__) || defined(ENUM_BITFIELDS)
+# define ENUM_BITFIELD(bits)    :bits
+#else
+# define ENUM_BITFIELD(bits)
+#endif
+
+/* Handle gettext and locales.  */
+
+#if HAVE_LOCALE_H
+# include <locale.h>
+#else
+# define setlocale(category, locale)
+#endif
+
+#include <gettext.h>
+
+#define _(msgid)            gettext (msgid)
+#define N_(msgid)           gettext_noop (msgid)
+#define S_(msg1,msg2,num)   ngettext (msg1,msg2,num)
+
+/* Handle other OSs.
+   To overcome an issue parsing paths in a DOS/Windows environment when
+   built in a unix based environment, override the PATH_SEPARATOR_CHAR
+   definition unless being built for Cygwin. */
+#if defined(HAVE_DOS_PATHS) && !defined(__CYGWIN__)
+# undef PATH_SEPARATOR_CHAR
+# define PATH_SEPARATOR_CHAR ';'
+#elif !defined(PATH_SEPARATOR_CHAR)
+# if defined (VMS)
+#  define PATH_SEPARATOR_CHAR ','
+# else
+#  define PATH_SEPARATOR_CHAR ':'
+# endif
+#endif
+
+/* This is needed for getcwd() and chdir(), on some W32 systems.  */
+#if defined(HAVE_DIRECT_H)
+# include <direct.h>
+#endif
+
+#ifdef WINDOWS32
+# include <fcntl.h>
+# include <malloc.h>
+# define pipe(_p)        _pipe((_p), 512, O_BINARY)
+# define kill(_pid,_sig) w32_kill((_pid),(_sig))
+/* MSVC and Watcom C don't have ftruncate.  */
+# if defined(_MSC_VER) || defined(__WATCOMC__)
+#  define ftruncate(_fd,_len) _chsize(_fd,_len)
+# endif
+/* MinGW64 doesn't have _S_ISDIR.  */
+# ifndef _S_ISDIR
+#  define _S_ISDIR(m)  S_ISDIR(m)
+# endif
+
+void sync_Path_environment (void);
+int w32_kill (pid_t pid, int sig);
+int find_and_set_default_shell (const char *token);
+
+/* indicates whether or not we have Bourne shell */
+extern int no_default_sh_exe;
+
+/* is default_shell unixy? */
+extern int unixy_shell;
+
+/* We don't have a preferred fixed value for LOCALEDIR.  */
+# ifndef LOCALEDIR
+#  define LOCALEDIR NULL
+# endif
+
+/* Include only the minimal stuff from windows.h.   */
+#define WIN32_LEAN_AND_MEAN
+#endif  /* WINDOWS32 */
+
+#define ANY_SET(_v,_m)  (((_v)&(_m)) != 0)
+#define NONE_SET(_v,_m) (! ANY_SET ((_v),(_m)))
+
+#define MAP_NUL         0x0001
+#define MAP_BLANK       0x0002
+#define MAP_SPACE       0x0004
+#define MAP_COMMENT     0x0008
+#define MAP_SEMI        0x0010
+#define MAP_EQUALS      0x0020
+#define MAP_COLON       0x0040
+#define MAP_PERCENT     0x0080
+#define MAP_PIPE        0x0100
+#define MAP_DOT         0x0200
+#define MAP_COMMA       0x0400
+
+/* These are the valid characters for a user-defined function.  */
+#define MAP_USERFUNC    0x2000
+/* This means not only a '$', but skip the variable reference.  */
+#define MAP_VARIABLE    0x4000
+/* The set of characters which are directory separators is OS-specific.  */
+#define MAP_DIRSEP      0x8000
+
+#ifdef VMS
+# define MAP_VMSCOMMA   MAP_COMMA
+#else
+# define MAP_VMSCOMMA   0x0000
+#endif
+
+#define STOP_SET(_v,_m) ANY_SET (stopchar_map[(unsigned char)(_v)],(_m))
+
+#if defined(HAVE_SYS_RESOURCE_H) && defined(HAVE_GETRLIMIT) && defined(HAVE_SETRLIMIT)
+# define SET_STACK_SIZE
+#endif
+#ifdef SET_STACK_SIZE
+# include <sys/resource.h>
+extern struct rlimit stack_limit;
+#endif
+
+#define NILF ((gmk_floc *)0)
+
+#define CSTRLEN(_s)           (sizeof (_s)-1)
+#define STRING_SIZE_TUPLE(_s) (_s), CSTRLEN(_s)
+
+/* The number of bytes needed to represent the largest integer as a string.  */
+#define INTSTR_LENGTH         CSTRLEN ("18446744073709551616")
+
+#ifdef HAVE_TTYNAME
+# define TTYNAME(_f) ttyname (_f)
+#else
+# define TTYNAME(_f) "true"
+#endif
+
+
+const char *concat (unsigned int, ...);
+void message (int prefix, size_t length, const char *fmt, ...)
+              __attribute__ ((__format__ (__printf__, 3, 4)));
+void error (const gmk_floc *flocp, size_t length, const char *fmt, ...)
+            __attribute__ ((__format__ (__printf__, 3, 4)));
+void fatal (const gmk_floc *flocp, size_t length, const char *fmt, ...)
+                   __attribute__ ((noreturn, __format__ (__printf__, 3, 4)));
+
+#define O(_t,_a,_f)           _t((_a), 0, (_f))
+#define OS(_t,_a,_f,_s)       _t((_a), strlen (_s), (_f), (_s))
+#define OSS(_t,_a,_f,_s1,_s2) _t((_a), strlen (_s1) + strlen (_s2), \
+                                 (_f), (_s1), (_s2))
+#define OSSS(_t,_a,_f,_s1,_s2,_s3) _t((_a), strlen (_s1) + strlen (_s2) + strlen (_s3), \
+                                      (_f), (_s1), (_s2), (_s3))
+#define ON(_t,_a,_f,_n)       _t((_a), INTSTR_LENGTH, (_f), (_n))
+#define ONN(_t,_a,_f,_n1,_n2) _t((_a), INTSTR_LENGTH*2, (_f), (_n1), (_n2))
+
+#define OSN(_t,_a,_f,_s,_n)   _t((_a), strlen (_s) + INTSTR_LENGTH, \
+                                 (_f), (_s), (_n))
+#define ONS(_t,_a,_f,_n,_s)   _t((_a), INTSTR_LENGTH + strlen (_s), \
+                                 (_f), (_n), (_s))
+
+#define OUT_OF_MEM() O (fatal, NILF, _("virtual memory exhausted"))
+
+void die (int) __attribute__ ((noreturn));
+void pfatal_with_name (const char *) __attribute__ ((noreturn));
+void perror_with_name (const char *, const char *);
+#define xstrlen(_s) ((_s)==NULL ? 0 : strlen (_s))
+void *xmalloc (unsigned int);
+void *xcalloc (unsigned int);
+void *xrealloc (void *, unsigned int);
+char *xstrdup (const char *);
+char *xstrndup (const char *, unsigned int);
+char *find_next_token (const char **, unsigned int *);
+char *next_token (const char *);
+char *end_of_token (const char *);
+void collapse_continuations (char *);
+char *lindex (const char *, const char *, int);
+int alpha_compare (const void *, const void *);
+void print_spaces (unsigned int);
+char *find_percent (char *);
+const char *find_percent_cached (const char **);
+
+#ifndef NO_ARCHIVES
+int ar_name (const char *);
+void ar_parse_name (const char *, char **, char **);
+int ar_touch (const char *);
+time_t ar_member_date (const char *);
+
+typedef long int (*ar_member_func_t) (int desc, const char *mem, int truncated,
+                                      long int hdrpos, long int datapos,
+                                      long int size, long int date, int uid,
+                                      int gid, int mode, const void *arg);
+
+long int ar_scan (const char *archive, ar_member_func_t function, const void *arg);
+int ar_name_equal (const char *name, const char *mem, int truncated);
+#ifndef VMS
+int ar_member_touch (const char *arname, const char *memname);
+#endif
+#endif
+
+int dir_file_exists_p (const char *, const char *);
+int file_exists_p (const char *);
+int file_impossible_p (const char *);
+void file_impossible (const char *);
+const char *dir_name (const char *);
+void hash_init_directories (void);
+
+void define_default_variables (void);
+void undefine_default_variables (void);
+void set_default_suffixes (void);
+void install_default_suffix_rules (void);
+void install_default_implicit_rules (void);
+
+void build_vpath_lists (void);
+void construct_vpath_list (char *pattern, char *dirpath);
+const char *vpath_search (const char *file, FILE_TIMESTAMP *mtime_ptr,
+                          unsigned int* vpath_index, unsigned int* path_index);
+int gpath_search (const char *file, unsigned int len);
+
+void construct_include_path (const char **arg_dirs);
+
+void user_access (void);
+void make_access (void);
+void child_access (void);
+
+char *strip_whitespace (const char **begpp, const char **endpp);
+
+/* String caching  */
+void strcache_init (void);
+void strcache_print_stats (const char *prefix);
+int strcache_iscached (const char *str);
+const char *strcache_add (const char *str);
+const char *strcache_add_len (const char *str, unsigned int len);
+int strcache_setbufsize (unsigned int size);
+
+/* Guile support  */
+int guile_gmake_setup (const gmk_floc *flocp);
+
+/* Loadable object support.  Sets to the strcached name of the loaded file.  */
+typedef int (*load_func_t)(const gmk_floc *flocp);
+int load_file (const gmk_floc *flocp, const char **filename, int noerror);
+void unload_file (const char *name);
+
+/* We omit these declarations on non-POSIX systems which define _POSIX_VERSION,
+   because such systems often declare them in header files anyway.  */
+
+#if !defined (__GNU_LIBRARY__) && !defined (POSIX) && !defined (_POSIX_VERSION) && !defined(WINDOWS32)
+
+long int atol ();
+# ifndef VMS
+long int lseek ();
+# endif
+
+#endif  /* Not GNU C library or POSIX.  */
+
+#ifdef  HAVE_GETCWD
+# if !defined(VMS) && !defined(__DECC)
+char *getcwd ();
+# endif
+#else
+char *getwd ();
+# define getcwd(buf, len)       getwd (buf)
+#endif
+
+#if !HAVE_STRCASECMP
+# if HAVE_STRICMP
+#  define strcasecmp stricmp
+# elif HAVE_STRCMPI
+#  define strcasecmp strcmpi
+# else
+/* Create our own, in misc.c */
+int strcasecmp (const char *s1, const char *s2);
+# endif
+#endif
+
+#if !HAVE_STRNCASECMP
+# if HAVE_STRNICMP
+#  define strncasecmp strnicmp
+# elif HAVE_STRNCMPI
+#  define strncasecmp strncmpi
+# else
+/* Create our own, in misc.c */
+int strncasecmp (const char *s1, const char *s2, int n);
+# endif
+#endif
+
+#define OUTPUT_SYNC_NONE    0
+#define OUTPUT_SYNC_LINE    1
+#define OUTPUT_SYNC_TARGET  2
+#define OUTPUT_SYNC_RECURSE 3
+
+extern const gmk_floc *reading_file;
+extern const gmk_floc **expanding_var;
+
+extern char **environ;
+
+extern unsigned short stopchar_map[];
+
+extern int just_print_flag, silent_flag, ignore_errors_flag, keep_going_flag;
+extern int print_data_base_flag, question_flag, touch_flag, always_make_flag;
+extern int env_overrides, no_builtin_rules_flag, no_builtin_variables_flag;
+extern int print_version_flag, print_directory_flag, check_symlink_flag;
+extern int warn_undefined_variables_flag, trace_flag, posix_pedantic;
+extern int not_parallel, second_expansion, clock_skew_detected;
+extern int rebuilding_makefiles, one_shell, output_sync, verify_flag;
+
+/* can we run commands via 'sh -c xxx' or must we use batch files? */
+extern int batch_mode_shell;
+
+/* Resetting the command script introduction prefix character.  */
+#define RECIPEPREFIX_NAME          ".RECIPEPREFIX"
+#define RECIPEPREFIX_DEFAULT       '\t'
+extern char cmd_prefix;
+
+extern unsigned int job_slots;
+extern int job_fds[2];
+extern int job_rfd;
+#ifndef NO_FLOAT
+extern double max_load_average;
+#else
+extern int max_load_average;
+#endif
+
+#ifdef WINDOWS32
+extern char *program;
+#else
+extern const char *program;
+#endif
+
+#ifdef VMS
+const char *vms_command(const char *argv0);
+const char *vms_progname(const char *argv0);
+#endif
+
+extern char *starting_directory;
+extern unsigned int makelevel;
+extern char *version_string, *remote_description, *make_host;
+
+extern unsigned int commands_started;
+
+extern int handling_fatal_signal;
+
+
+#ifndef MIN
+#define MIN(_a,_b) ((_a)<(_b)?(_a):(_b))
+#endif
+#ifndef MAX
+#define MAX(_a,_b) ((_a)>(_b)?(_a):(_b))
+#endif
+
+
+#ifdef VMS
+/* These are the VMS __posix_exit compliant exit codes, constructed out of
+   STS$M_INHIB_MSG, C facility code, a POSIX condition code mask, MAKE_NNN<<3 and
+   the coresponding VMS severity, here STS$K_SUCCESS and STS$K_ERROR. */
+#  define MAKE_SUCCESS 0x1035a001
+#  define MAKE_TROUBLE 0x1035a00a
+#  define MAKE_FAILURE 0x1035a012
+#else
+#  define MAKE_SUCCESS 0
+#  define MAKE_TROUBLE 1
+#  define MAKE_FAILURE 2
+#endif
+
+/* Set up heap debugging library dmalloc.  */
+
+#ifdef HAVE_DMALLOC_H
+#include <dmalloc.h>
+#endif
+
+#ifndef initialize_main
+# ifdef __EMX__
+#  define initialize_main(pargc, pargv) \
+                          { _wildcard(pargc, pargv); _response(pargc, pargv); }
+# else
+#  define initialize_main(pargc, pargv)
+# endif
+#endif
+
+#ifdef __EMX__
+# if !defined chdir
+#  define chdir _chdir2
+# endif
+# if !defined getcwd
+#  define getcwd _getcwd2
+# endif
+
+/* NO_CHDIR2 causes make not to use _chdir2() and _getcwd2() instead of
+   chdir() and getcwd(). This avoids some error messages for the
+   make testsuite but restricts the drive letter support. */
+# ifdef NO_CHDIR2
+#  warning NO_CHDIR2: usage of drive letters restricted
+#  undef chdir
+#  undef getcwd
+# endif
+#endif
+
+#ifndef initialize_main
+# define initialize_main(pargc, pargv)
+#endif
+
+
+/* Some systems (like Solaris, PTX, etc.) do not support the SA_RESTART flag
+   properly according to POSIX.  So, we try to wrap common system calls with
+   checks for EINTR.  Note that there are still plenty of system calls that
+   can fail with EINTR but this, reportedly, gets the vast majority of
+   failure cases.  If you still experience failures you'll need to either get
+   a system where SA_RESTART works, or you need to avoid -j.  */
+
+#define EINTRLOOP(_v,_c)   while (((_v)=_c)==-1 && errno==EINTR)
+
+/* While system calls that return integers are pretty consistent about
+   returning -1 on failure and setting errno in that case, functions that
+   return pointers are not always so well behaved.  Sometimes they return
+   NULL for expected behavior: one good example is readdir() which returns
+   NULL at the end of the directory--and _doesn't_ reset errno.  So, we have
+   to do it ourselves here.  */
+
+#define ENULLLOOP(_v,_c)   do { errno = 0; (_v) = _c; } \
+                           while((_v)==0 && errno==EINTR)
diff --git a/misc.c b/misc.c
new file mode 100644
index 0000000..00a3210
--- /dev/null
+++ b/misc.c
@@ -0,0 +1,726 @@
+/* Miscellaneous generic support functions for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "dep.h"
+#include "debug.h"
+
+/* GNU make no longer supports pre-ANSI89 environments.  */
+
+#include <stdarg.h>
+
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+#else
+# include <sys/file.h>
+#endif
+
+/* Compare strings *S1 and *S2.
+   Return negative if the first is less, positive if it is greater,
+   zero if they are equal.  */
+
+int
+alpha_compare (const void *v1, const void *v2)
+{
+  const char *s1 = *((char **)v1);
+  const char *s2 = *((char **)v2);
+
+  if (*s1 != *s2)
+    return *s1 - *s2;
+  return strcmp (s1, s2);
+}
+
+/* Discard each backslash-newline combination from LINE.
+   Backslash-backslash-newline combinations become backslash-newlines.
+   This is done by copying the text at LINE into itself.  */
+
+void
+collapse_continuations (char *line)
+{
+  char *in, *out, *p;
+
+  in = strchr (line, '\n');
+  if (in == 0)
+    return;
+
+  out = in;
+  while (out > line && out[-1] == '\\')
+    --out;
+
+  while (*in != '\0')
+    {
+      /* BS_WRITE gets the number of quoted backslashes at
+         the end just before IN, and BACKSLASH gets nonzero
+         if the next character is quoted.  */
+      unsigned int backslash = 0;
+      unsigned int bs_write = 0;
+      for (p = in - 1; p >= line && *p == '\\'; --p)
+        {
+          if (backslash)
+            ++bs_write;
+          backslash = !backslash;
+
+          /* It should be impossible to go back this far without exiting,
+             but if we do, we can't get the right answer.  */
+          if (in == out - 1)
+            abort ();
+        }
+
+      /* Output the appropriate number of backslashes.  */
+      while (bs_write-- > 0)
+        *out++ = '\\';
+
+      /* Skip the newline.  */
+      ++in;
+
+      if (backslash)
+        {
+          /* Backslash/newline handling:
+             In traditional GNU make all trailing whitespace, consecutive
+             backslash/newlines, and any leading whitespace on the next line
+             is reduced to a single space.
+             In POSIX, each backslash/newline and is replaced by a space.  */
+          in = next_token (in);
+          if (! posix_pedantic)
+            while (out > line && isblank ((unsigned char)out[-1]))
+              --out;
+          *out++ = ' ';
+        }
+      else
+        /* If the newline isn't quoted, put it in the output.  */
+        *out++ = '\n';
+
+      /* Now copy the following line to the output.
+         Stop when we find backslashes followed by a newline.  */
+      while (*in != '\0')
+        if (*in == '\\')
+          {
+            p = in + 1;
+            while (*p == '\\')
+              ++p;
+            if (*p == '\n')
+              {
+                in = p;
+                break;
+              }
+            while (in < p)
+              *out++ = *in++;
+          }
+        else
+          *out++ = *in++;
+    }
+
+  *out = '\0';
+}
+
+/* Print N spaces (used in debug for target-depth).  */
+
+void
+print_spaces (unsigned int n)
+{
+  while (n-- > 0)
+    putchar (' ');
+}
+
+
+/* Return a string whose contents concatenate the NUM strings provided
+   This string lives in static, re-used memory.  */
+
+const char *
+concat (unsigned int num, ...)
+{
+  static unsigned int rlen = 0;
+  static char *result = NULL;
+  unsigned int ri = 0;
+  va_list args;
+
+  va_start (args, num);
+
+  while (num-- > 0)
+    {
+      const char *s = va_arg (args, const char *);
+      unsigned int l = xstrlen (s);
+
+      if (l == 0)
+        continue;
+
+      if (ri + l > rlen)
+        {
+          rlen = ((rlen ? rlen : 60) + l) * 2;
+          result = xrealloc (result, rlen);
+        }
+
+      memcpy (result + ri, s, l);
+      ri += l;
+    }
+
+  va_end (args);
+
+  /* Get some more memory if we don't have enough space for the
+     terminating '\0'.   */
+  if (ri == rlen)
+    {
+      rlen = (rlen ? rlen : 60) * 2;
+      result = xrealloc (result, rlen);
+    }
+
+  result[ri] = '\0';
+
+  return result;
+}
+
+
+#ifndef HAVE_STRERROR
+#undef  strerror
+char *
+strerror (int errnum)
+{
+  extern int errno, sys_nerr;
+#ifndef __DECC
+  extern char *sys_errlist[];
+#endif
+  static char buf[] = "Unknown error 12345678901234567890";
+
+  if (errno < sys_nerr)
+    return sys_errlist[errnum];
+
+  sprintf (buf, _("Unknown error %d"), errnum);
+  return buf;
+}
+#endif
+
+/* Like malloc but get fatal error if memory is exhausted.  */
+/* Don't bother if we're using dmalloc; it provides these for us.  */
+
+#ifndef HAVE_DMALLOC_H
+
+#undef xmalloc
+#undef xcalloc
+#undef xrealloc
+#undef xstrdup
+
+void *
+xmalloc (unsigned int size)
+{
+  /* Make sure we don't allocate 0, for pre-ISO implementations.  */
+  void *result = malloc (size ? size : 1);
+  if (result == 0)
+    OUT_OF_MEM();
+  return result;
+}
+
+
+void *
+xcalloc (unsigned int size)
+{
+  /* Make sure we don't allocate 0, for pre-ISO implementations.  */
+  void *result = calloc (size ? size : 1, 1);
+  if (result == 0)
+    OUT_OF_MEM();
+  return result;
+}
+
+
+void *
+xrealloc (void *ptr, unsigned int size)
+{
+  void *result;
+
+  /* Some older implementations of realloc() don't conform to ISO.  */
+  if (! size)
+    size = 1;
+  result = ptr ? realloc (ptr, size) : malloc (size);
+  if (result == 0)
+    OUT_OF_MEM();
+  return result;
+}
+
+
+char *
+xstrdup (const char *ptr)
+{
+  char *result;
+
+#ifdef HAVE_STRDUP
+  result = strdup (ptr);
+#else
+  result = malloc (strlen (ptr) + 1);
+#endif
+
+  if (result == 0)
+    OUT_OF_MEM();
+
+#ifdef HAVE_STRDUP
+  return result;
+#else
+  return strcpy (result, ptr);
+#endif
+}
+
+#endif  /* HAVE_DMALLOC_H */
+
+char *
+xstrndup (const char *str, unsigned int length)
+{
+  char *result;
+
+#ifdef HAVE_STRNDUP
+  result = strndup (str, length);
+  if (result == 0)
+    OUT_OF_MEM();
+#else
+  result = xmalloc (length + 1);
+  if (length > 0)
+    strncpy (result, str, length);
+  result[length] = '\0';
+#endif
+
+  return result;
+}
+
+
+/* Limited INDEX:
+   Search through the string STRING, which ends at LIMIT, for the character C.
+   Returns a pointer to the first occurrence, or nil if none is found.
+   Like INDEX except that the string searched ends where specified
+   instead of at the first null.  */
+
+char *
+lindex (const char *s, const char *limit, int c)
+{
+  while (s < limit)
+    if (*s++ == c)
+      return (char *)(s - 1);
+
+  return 0;
+}
+
+/* Return the address of the first whitespace or null in the string S.  */
+
+char *
+end_of_token (const char *s)
+{
+  while (! STOP_SET (*s, MAP_BLANK|MAP_NUL))
+    ++s;
+  return (char *)s;
+}
+
+/* Return the address of the first nonwhitespace or null in the string S.  */
+
+char *
+next_token (const char *s)
+{
+  while (isblank ((unsigned char)*s))
+    ++s;
+  return (char *)s;
+}
+
+/* Find the next token in PTR; return the address of it, and store the length
+   of the token into *LENGTHPTR if LENGTHPTR is not nil.  Set *PTR to the end
+   of the token, so this function can be called repeatedly in a loop.  */
+
+char *
+find_next_token (const char **ptr, unsigned int *lengthptr)
+{
+  const char *p = next_token (*ptr);
+
+  if (*p == '\0')
+    return 0;
+
+  *ptr = end_of_token (p);
+  if (lengthptr != 0)
+    *lengthptr = *ptr - p;
+
+  return (char *)p;
+}
+
+
+/* Copy a chain of 'struct dep'.  For 2nd expansion deps, dup the name.  */
+
+struct dep *
+copy_dep_chain (const struct dep *d)
+{
+  struct dep *firstnew = 0;
+  struct dep *lastnew = 0;
+
+  while (d != 0)
+    {
+      struct dep *c = xmalloc (sizeof (struct dep));
+      memcpy (c, d, sizeof (struct dep));
+
+      if (c->need_2nd_expansion)
+        c->name = xstrdup (c->name);
+
+      c->next = 0;
+      if (firstnew == 0)
+        firstnew = lastnew = c;
+      else
+        lastnew = lastnew->next = c;
+
+      d = d->next;
+    }
+
+  return firstnew;
+}
+
+/* Free a chain of 'struct dep'.  */
+
+void
+free_dep_chain (struct dep *d)
+{
+  while (d != 0)
+    {
+      struct dep *df = d;
+      d = d->next;
+      free_dep (df);
+    }
+}
+
+/* Free a chain of struct nameseq.
+   For struct dep chains use free_dep_chain.  */
+
+void
+free_ns_chain (struct nameseq *ns)
+{
+  while (ns != 0)
+    {
+      struct nameseq *t = ns;
+      ns = ns->next;
+      free (t);
+    }
+}
+
+
+#if !HAVE_STRCASECMP && !HAVE_STRICMP && !HAVE_STRCMPI
+/* If we don't have strcasecmp() (from POSIX), or anything that can substitute
+   for it, define our own version.  */
+
+int
+strcasecmp (const char *s1, const char *s2)
+{
+  while (1)
+    {
+      int c1 = (int) *(s1++);
+      int c2 = (int) *(s2++);
+
+      if (isalpha (c1))
+        c1 = tolower (c1);
+      if (isalpha (c2))
+        c2 = tolower (c2);
+
+      if (c1 != '\0' && c1 == c2)
+        continue;
+
+      return (c1 - c2);
+    }
+}
+#endif
+
+#if !HAVE_STRNCASECMP && !HAVE_STRNICMP && !HAVE_STRNCMPI
+/* If we don't have strncasecmp() (from POSIX), or anything that can
+   substitute for it, define our own version.  */
+
+int
+strncasecmp (const char *s1, const char *s2, int n)
+{
+  while (n-- > 0)
+    {
+      int c1 = (int) *(s1++);
+      int c2 = (int) *(s2++);
+
+      if (isalpha (c1))
+        c1 = tolower (c1);
+      if (isalpha (c2))
+        c2 = tolower (c2);
+
+      if (c1 != '\0' && c1 == c2)
+        continue;
+
+      return (c1 - c2);
+    }
+
+  return 0;
+}
+#endif
+
+#ifdef  GETLOADAVG_PRIVILEGED
+
+#ifdef POSIX
+
+/* Hopefully if a system says it's POSIX.1 and has the setuid and setgid
+   functions, they work as POSIX.1 says.  Some systems (Alpha OSF/1 1.2,
+   for example) which claim to be POSIX.1 also have the BSD setreuid and
+   setregid functions, but they don't work as in BSD and only the POSIX.1
+   way works.  */
+
+#undef HAVE_SETREUID
+#undef HAVE_SETREGID
+
+#else   /* Not POSIX.  */
+
+/* Some POSIX.1 systems have the seteuid and setegid functions.  In a
+   POSIX-like system, they are the best thing to use.  However, some
+   non-POSIX systems have them too but they do not work in the POSIX style
+   and we must use setreuid and setregid instead.  */
+
+#undef HAVE_SETEUID
+#undef HAVE_SETEGID
+
+#endif  /* POSIX.  */
+
+#ifndef HAVE_UNISTD_H
+extern int getuid (), getgid (), geteuid (), getegid ();
+extern int setuid (), setgid ();
+#ifdef HAVE_SETEUID
+extern int seteuid ();
+#else
+#ifdef  HAVE_SETREUID
+extern int setreuid ();
+#endif  /* Have setreuid.  */
+#endif  /* Have seteuid.  */
+#ifdef HAVE_SETEGID
+extern int setegid ();
+#else
+#ifdef  HAVE_SETREGID
+extern int setregid ();
+#endif  /* Have setregid.  */
+#endif  /* Have setegid.  */
+#endif  /* No <unistd.h>.  */
+
+/* Keep track of the user and group IDs for user- and make- access.  */
+static int user_uid = -1, user_gid = -1, make_uid = -1, make_gid = -1;
+#define access_inited   (user_uid != -1)
+static enum { make, user } current_access;
+
+
+/* Under -d, write a message describing the current IDs.  */
+
+static void
+log_access (const char *flavor)
+{
+  if (! ISDB (DB_JOBS))
+    return;
+
+  /* All the other debugging messages go to stdout,
+     but we write this one to stderr because it might be
+     run in a child fork whose stdout is piped.  */
+
+  fprintf (stderr, _("%s: user %lu (real %lu), group %lu (real %lu)\n"),
+           flavor, (unsigned long) geteuid (), (unsigned long) getuid (),
+           (unsigned long) getegid (), (unsigned long) getgid ());
+  fflush (stderr);
+}
+
+
+static void
+init_access (void)
+{
+#ifndef VMS
+  user_uid = getuid ();
+  user_gid = getgid ();
+
+  make_uid = geteuid ();
+  make_gid = getegid ();
+
+  /* Do these ever fail?  */
+  if (user_uid == -1 || user_gid == -1 || make_uid == -1 || make_gid == -1)
+    pfatal_with_name ("get{e}[gu]id");
+
+  log_access (_("Initialized access"));
+
+  current_access = make;
+#endif
+}
+
+#endif  /* GETLOADAVG_PRIVILEGED */
+
+/* Give the process appropriate permissions for access to
+   user data (i.e., to stat files, or to spawn a child process).  */
+void
+user_access (void)
+{
+#ifdef  GETLOADAVG_PRIVILEGED
+
+  if (!access_inited)
+    init_access ();
+
+  if (current_access == user)
+    return;
+
+  /* We are in "make access" mode.  This means that the effective user and
+     group IDs are those of make (if it was installed setuid or setgid).
+     We now want to set the effective user and group IDs to the real IDs,
+     which are the IDs of the process that exec'd make.  */
+
+#ifdef  HAVE_SETEUID
+
+  /* Modern systems have the seteuid/setegid calls which set only the
+     effective IDs, which is ideal.  */
+
+  if (seteuid (user_uid) < 0)
+    pfatal_with_name ("user_access: seteuid");
+
+#else   /* Not HAVE_SETEUID.  */
+
+#ifndef HAVE_SETREUID
+
+  /* System V has only the setuid/setgid calls to set user/group IDs.
+     There is an effective ID, which can be set by setuid/setgid.
+     It can be set (unless you are root) only to either what it already is
+     (returned by geteuid/getegid, now in make_uid/make_gid),
+     the real ID (return by getuid/getgid, now in user_uid/user_gid),
+     or the saved set ID (what the effective ID was before this set-ID
+     executable (make) was exec'd).  */
+
+  if (setuid (user_uid) < 0)
+    pfatal_with_name ("user_access: setuid");
+
+#else   /* HAVE_SETREUID.  */
+
+  /* In 4BSD, the setreuid/setregid calls set both the real and effective IDs.
+     They may be set to themselves or each other.  So you have two alternatives
+     at any one time.  If you use setuid/setgid, the effective will be set to
+     the real, leaving only one alternative.  Using setreuid/setregid, however,
+     you can toggle between your two alternatives by swapping the values in a
+     single setreuid or setregid call.  */
+
+  if (setreuid (make_uid, user_uid) < 0)
+    pfatal_with_name ("user_access: setreuid");
+
+#endif  /* Not HAVE_SETREUID.  */
+#endif  /* HAVE_SETEUID.  */
+
+#ifdef  HAVE_SETEGID
+  if (setegid (user_gid) < 0)
+    pfatal_with_name ("user_access: setegid");
+#else
+#ifndef HAVE_SETREGID
+  if (setgid (user_gid) < 0)
+    pfatal_with_name ("user_access: setgid");
+#else
+  if (setregid (make_gid, user_gid) < 0)
+    pfatal_with_name ("user_access: setregid");
+#endif
+#endif
+
+  current_access = user;
+
+  log_access (_("User access"));
+
+#endif  /* GETLOADAVG_PRIVILEGED */
+}
+
+/* Give the process appropriate permissions for access to
+   make data (i.e., the load average).  */
+void
+make_access (void)
+{
+#ifdef  GETLOADAVG_PRIVILEGED
+
+  if (!access_inited)
+    init_access ();
+
+  if (current_access == make)
+    return;
+
+  /* See comments in user_access, above.  */
+
+#ifdef  HAVE_SETEUID
+  if (seteuid (make_uid) < 0)
+    pfatal_with_name ("make_access: seteuid");
+#else
+#ifndef HAVE_SETREUID
+  if (setuid (make_uid) < 0)
+    pfatal_with_name ("make_access: setuid");
+#else
+  if (setreuid (user_uid, make_uid) < 0)
+    pfatal_with_name ("make_access: setreuid");
+#endif
+#endif
+
+#ifdef  HAVE_SETEGID
+  if (setegid (make_gid) < 0)
+    pfatal_with_name ("make_access: setegid");
+#else
+#ifndef HAVE_SETREGID
+  if (setgid (make_gid) < 0)
+    pfatal_with_name ("make_access: setgid");
+#else
+  if (setregid (user_gid, make_gid) < 0)
+    pfatal_with_name ("make_access: setregid");
+#endif
+#endif
+
+  current_access = make;
+
+  log_access (_("Make access"));
+
+#endif  /* GETLOADAVG_PRIVILEGED */
+}
+
+/* Give the process appropriate permissions for a child process.
+   This is like user_access, but you can't get back to make_access.  */
+void
+child_access (void)
+{
+#ifdef  GETLOADAVG_PRIVILEGED
+
+  if (!access_inited)
+    abort ();
+
+  /* Set both the real and effective UID and GID to the user's.
+     They cannot be changed back to make's.  */
+
+#ifndef HAVE_SETREUID
+  if (setuid (user_uid) < 0)
+    pfatal_with_name ("child_access: setuid");
+#else
+  if (setreuid (user_uid, user_uid) < 0)
+    pfatal_with_name ("child_access: setreuid");
+#endif
+
+#ifndef HAVE_SETREGID
+  if (setgid (user_gid) < 0)
+    pfatal_with_name ("child_access: setgid");
+#else
+  if (setregid (user_gid, user_gid) < 0)
+    pfatal_with_name ("child_access: setregid");
+#endif
+
+  log_access (_("Child access"));
+
+#endif  /* GETLOADAVG_PRIVILEGED */
+}
+
+#ifdef NEED_GET_PATH_MAX
+unsigned int
+get_path_max (void)
+{
+  static unsigned int value;
+
+  if (value == 0)
+    {
+      long int x = pathconf ("/", _PC_PATH_MAX);
+      if (x > 0)
+        value = x;
+      else
+        return MAXPATHLEN;
+    }
+
+  return value;
+}
+#endif
diff --git a/output.c b/output.c
new file mode 100644
index 0000000..e537f3a
--- /dev/null
+++ b/output.c
@@ -0,0 +1,723 @@
+/* Output to stdout / stderr for GNU make
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "job.h"
+
+/* GNU make no longer supports pre-ANSI89 environments.  */
+
+#include <assert.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+#else
+# include <sys/file.h>
+#endif
+
+#ifdef WINDOWS32
+# include <windows.h>
+# include <io.h>
+# include "sub_proc.h"
+#endif /* WINDOWS32 */
+
+struct output *output_context = NULL;
+unsigned int stdio_traced = 0;
+
+#define OUTPUT_NONE (-1)
+
+#define OUTPUT_ISSET(_out) ((_out)->out >= 0 || (_out)->err >= 0)
+
+#ifdef HAVE_FCNTL
+# define STREAM_OK(_s) ((fcntl (fileno (_s), F_GETFD) != -1) || (errno != EBADF))
+#else
+# define STREAM_OK(_s) 1
+#endif
+
+/* Write a string to the current STDOUT or STDERR.  */
+static void
+_outputs (struct output *out, int is_err, const char *msg)
+{
+  if (! out || ! out->syncout)
+    {
+      FILE *f = is_err ? stderr : stdout;
+      fputs (msg, f);
+      fflush (f);
+    }
+  else
+    {
+      int fd = is_err ? out->err : out->out;
+      int len = strlen (msg);
+      int r;
+
+      EINTRLOOP (r, lseek (fd, 0, SEEK_END));
+      while (1)
+        {
+          EINTRLOOP (r, write (fd, msg, len));
+          if (r == len || r <= 0)
+            break;
+          len -= r;
+          msg += r;
+        }
+    }
+}
+
+/* Write a message indicating that we've just entered or
+   left (according to ENTERING) the current directory.  */
+
+static int
+log_working_directory (int entering)
+{
+  static char *buf = NULL;
+  static unsigned int len = 0;
+  unsigned int need;
+  const char *fmt;
+  char *p;
+
+  /* Get enough space for the longest possible output.  */
+  need = strlen (program) + INTSTR_LENGTH + 2 + 1;
+  if (starting_directory)
+    need += strlen (starting_directory);
+
+  /* Use entire sentences to give the translators a fighting chance.  */
+  if (makelevel == 0)
+    if (starting_directory == 0)
+      if (entering)
+        fmt = _("%s: Entering an unknown directory\n");
+      else
+        fmt = _("%s: Leaving an unknown directory\n");
+    else
+      if (entering)
+        fmt = _("%s: Entering directory '%s'\n");
+      else
+        fmt = _("%s: Leaving directory '%s'\n");
+  else
+    if (starting_directory == 0)
+      if (entering)
+        fmt = _("%s[%u]: Entering an unknown directory\n");
+      else
+        fmt = _("%s[%u]: Leaving an unknown directory\n");
+    else
+      if (entering)
+        fmt = _("%s[%u]: Entering directory '%s'\n");
+      else
+        fmt = _("%s[%u]: Leaving directory '%s'\n");
+
+  need += strlen (fmt);
+
+  if (need > len)
+    {
+      buf = xrealloc (buf, need);
+      len = need;
+    }
+
+  p = buf;
+  if (print_data_base_flag)
+    {
+      *(p++) = '#';
+      *(p++) = ' ';
+    }
+
+  if (makelevel == 0)
+    if (starting_directory == 0)
+      sprintf (p, fmt , program);
+    else
+      sprintf (p, fmt, program, starting_directory);
+  else if (starting_directory == 0)
+    sprintf (p, fmt, program, makelevel);
+  else
+    sprintf (p, fmt, program, makelevel, starting_directory);
+
+  _outputs (NULL, 0, buf);
+
+  return 1;
+}
+
+/* Set a file descriptor to be in O_APPEND mode.
+   If it fails, just ignore it.  */
+
+static void
+set_append_mode (int fd)
+{
+#if defined(F_GETFL) && defined(F_SETFL) && defined(O_APPEND)
+  int flags = fcntl (fd, F_GETFL, 0);
+  if (flags >= 0)
+    fcntl (fd, F_SETFL, flags | O_APPEND);
+#endif
+}
+
+
+#ifndef NO_OUTPUT_SYNC
+
+/* Semaphore for use in -j mode with output_sync. */
+static sync_handle_t sync_handle = -1;
+
+#define FD_NOT_EMPTY(_f) ((_f) != OUTPUT_NONE && lseek ((_f), 0, SEEK_END) > 0)
+
+/* Set up the sync handle.  Disables output_sync on error.  */
+static int
+sync_init ()
+{
+  int combined_output = 0;
+
+#ifdef WINDOWS32
+  if ((!STREAM_OK (stdout) && !STREAM_OK (stderr))
+      || (sync_handle = create_mutex ()) == -1)
+    {
+      perror_with_name ("output-sync suppressed: ", "stderr");
+      output_sync = 0;
+    }
+  else
+    {
+      combined_output = same_stream (stdout, stderr);
+      prepare_mutex_handle_string (sync_handle);
+    }
+
+#else
+  if (STREAM_OK (stdout))
+    {
+      struct stat stbuf_o, stbuf_e;
+
+      sync_handle = fileno (stdout);
+      combined_output = (fstat (fileno (stdout), &stbuf_o) == 0
+                         && fstat (fileno (stderr), &stbuf_e) == 0
+                         && stbuf_o.st_dev == stbuf_e.st_dev
+                         && stbuf_o.st_ino == stbuf_e.st_ino);
+    }
+  else if (STREAM_OK (stderr))
+    sync_handle = fileno (stderr);
+  else
+    {
+      perror_with_name ("output-sync suppressed: ", "stderr");
+      output_sync = 0;
+    }
+#endif
+
+  return combined_output;
+}
+
+/* Support routine for output_sync() */
+static void
+pump_from_tmp (int from, FILE *to)
+{
+  static char buffer[8192];
+
+#ifdef WINDOWS32
+  int prev_mode;
+
+  /* "from" is opened by open_tmpfd, which does it in binary mode, so
+     we need the mode of "to" to match that.  */
+  prev_mode = _setmode (fileno (to), _O_BINARY);
+#endif
+
+  if (lseek (from, 0, SEEK_SET) == -1)
+    perror ("lseek()");
+
+  while (1)
+    {
+      int len;
+      EINTRLOOP (len, read (from, buffer, sizeof (buffer)));
+      if (len < 0)
+        perror ("read()");
+      if (len <= 0)
+        break;
+      if (fwrite (buffer, len, 1, to) < 1)
+        {
+          perror ("fwrite()");
+          break;
+        }
+      fflush (to);
+    }
+
+#ifdef WINDOWS32
+  /* Switch "to" back to its original mode, so that log messages by
+     Make have the same EOL format as without --output-sync.  */
+  _setmode (fileno (to), prev_mode);
+#endif
+}
+
+/* Obtain the lock for writing output.  */
+static void *
+acquire_semaphore (void)
+{
+  static struct flock fl;
+
+  fl.l_type = F_WRLCK;
+  fl.l_whence = SEEK_SET;
+  fl.l_start = 0;
+  fl.l_len = 1;
+  if (fcntl (sync_handle, F_SETLKW, &fl) != -1)
+    return &fl;
+  perror ("fcntl()");
+  return NULL;
+}
+
+/* Release the lock for writing output.  */
+static void
+release_semaphore (void *sem)
+{
+  struct flock *flp = (struct flock *)sem;
+  flp->l_type = F_UNLCK;
+  if (fcntl (sync_handle, F_SETLKW, flp) == -1)
+    perror ("fcntl()");
+}
+
+/* Returns a file descriptor to a temporary file.  The file is automatically
+   closed/deleted on exit.  Don't use a FILE* stream.  */
+int
+output_tmpfd ()
+{
+  int fd = -1;
+  FILE *tfile = tmpfile ();
+
+  if (! tfile)
+    pfatal_with_name ("tmpfile");
+
+  /* Create a duplicate so we can close the stream.  */
+  fd = dup (fileno (tfile));
+  if (fd < 0)
+    pfatal_with_name ("dup");
+
+  fclose (tfile);
+
+  set_append_mode (fd);
+
+  return fd;
+}
+
+/* Adds file descriptors to the child structure to support output_sync; one
+   for stdout and one for stderr as long as they are open.  If stdout and
+   stderr share a device they can share a temp file too.
+   Will reset output_sync on error.  */
+static void
+setup_tmpfile (struct output *out)
+{
+  /* Is make's stdout going to the same place as stderr?  */
+  static int combined_output = -1;
+
+  if (combined_output < 0)
+    combined_output = sync_init ();
+
+  if (STREAM_OK (stdout))
+    {
+      int fd = output_tmpfd ();
+      if (fd < 0)
+        goto error;
+      CLOSE_ON_EXEC (fd);
+      out->out = fd;
+    }
+
+  if (STREAM_OK (stderr))
+    {
+      if (out->out != OUTPUT_NONE && combined_output)
+        out->err = out->out;
+      else
+        {
+          int fd = output_tmpfd ();
+          if (fd < 0)
+            goto error;
+          CLOSE_ON_EXEC (fd);
+          out->err = fd;
+        }
+    }
+
+  return;
+
+  /* If we failed to create a temp file, disable output sync going forward.  */
+ error:
+  output_close (out);
+  output_sync = 0;
+}
+
+/* Synchronize the output of jobs in -j mode to keep the results of
+   each job together. This is done by holding the results in temp files,
+   one for stdout and potentially another for stderr, and only releasing
+   them to "real" stdout/stderr when a semaphore can be obtained. */
+
+void
+output_dump (struct output *out)
+{
+  int outfd_not_empty = FD_NOT_EMPTY (out->out);
+  int errfd_not_empty = FD_NOT_EMPTY (out->err);
+
+  if (outfd_not_empty || errfd_not_empty)
+    {
+      int traced = 0;
+
+      /* Try to acquire the semaphore.  If it fails, dump the output
+         unsynchronized; still better than silently discarding it.
+         We want to keep this lock for as little time as possible.  */
+      void *sem = acquire_semaphore ();
+
+      /* Log the working directory for this dump.  */
+      if (print_directory_flag && output_sync != OUTPUT_SYNC_RECURSE)
+        traced = log_working_directory (1);
+
+      if (outfd_not_empty)
+        pump_from_tmp (out->out, stdout);
+      if (errfd_not_empty && out->err != out->out)
+        pump_from_tmp (out->err, stderr);
+
+      if (traced)
+        log_working_directory (0);
+
+      /* Exit the critical section.  */
+      if (sem)
+        release_semaphore (sem);
+
+      /* Truncate and reset the output, in case we use it again.  */
+      if (out->out != OUTPUT_NONE)
+        {
+          int e;
+          lseek (out->out, 0, SEEK_SET);
+          EINTRLOOP (e, ftruncate (out->out, 0));
+        }
+      if (out->err != OUTPUT_NONE && out->err != out->out)
+        {
+          int e;
+          lseek (out->err, 0, SEEK_SET);
+          EINTRLOOP (e, ftruncate (out->err, 0));
+        }
+    }
+}
+#endif /* NO_OUTPUT_SYNC */
+
+
+/* Provide support for temporary files.  */
+
+#ifndef HAVE_STDLIB_H
+# ifdef HAVE_MKSTEMP
+int mkstemp (char *template);
+# else
+char *mktemp (char *template);
+# endif
+#endif
+
+FILE *
+output_tmpfile (char **name, const char *template)
+{
+#ifdef HAVE_FDOPEN
+  int fd;
+#endif
+
+#if defined HAVE_MKSTEMP || defined HAVE_MKTEMP
+# define TEMPLATE_LEN   strlen (template)
+#else
+# define TEMPLATE_LEN   L_tmpnam
+#endif
+  *name = xmalloc (TEMPLATE_LEN + 1);
+  strcpy (*name, template);
+
+#if defined HAVE_MKSTEMP && defined HAVE_FDOPEN
+  /* It's safest to use mkstemp(), if we can.  */
+  fd = mkstemp (*name);
+  if (fd == -1)
+    return 0;
+  return fdopen (fd, "w");
+#else
+# ifdef HAVE_MKTEMP
+  (void) mktemp (*name);
+# else
+  (void) tmpnam (*name);
+# endif
+
+# ifdef HAVE_FDOPEN
+  /* Can't use mkstemp(), but guard against a race condition.  */
+  fd = open (*name, O_CREAT|O_EXCL|O_WRONLY, 0600);
+  if (fd == -1)
+    return 0;
+  return fdopen (fd, "w");
+# else
+  /* Not secure, but what can we do?  */
+  return fopen (*name, "w");
+# endif
+#endif
+}
+
+
+/* This code is stolen from gnulib.
+   If/when we abandon the requirement to work with K&R compilers, we can
+   remove this (and perhaps other parts of GNU make!) and migrate to using
+   gnulib directly.
+
+   This is called only through atexit(), which means die() has already been
+   invoked.  So, call exit() here directly.  Apparently that works...?
+*/
+
+/* Close standard output, exiting with status 'exit_failure' on failure.
+   If a program writes *anything* to stdout, that program should close
+   stdout and make sure that it succeeds before exiting.  Otherwise,
+   suppose that you go to the extreme of checking the return status
+   of every function that does an explicit write to stdout.  The last
+   printf can succeed in writing to the internal stream buffer, and yet
+   the fclose(stdout) could still fail (due e.g., to a disk full error)
+   when it tries to write out that buffered data.  Thus, you would be
+   left with an incomplete output file and the offending program would
+   exit successfully.  Even calling fflush is not always sufficient,
+   since some file systems (NFS and CODA) buffer written/flushed data
+   until an actual close call.
+
+   Besides, it's wasteful to check the return value from every call
+   that writes to stdout -- just let the internal stream state record
+   the failure.  That's what the ferror test is checking below.
+
+   It's important to detect such failures and exit nonzero because many
+   tools (most notably 'make' and other build-management systems) depend
+   on being able to detect failure in other tools via their exit status.  */
+
+static void
+close_stdout (void)
+{
+  int prev_fail = ferror (stdout);
+  int fclose_fail = fclose (stdout);
+
+  if (prev_fail || fclose_fail)
+    {
+      if (fclose_fail)
+        perror_with_name (_("write error: stdout"), "");
+      else
+        O (error, NILF, _("write error: stdout"));
+      exit (MAKE_TROUBLE);
+    }
+}
+
+
+void
+output_init (struct output *out)
+{
+  if (out)
+    {
+      out->out = out->err = OUTPUT_NONE;
+      out->syncout = !!output_sync;
+      return;
+    }
+
+  /* Configure this instance of make.  Be sure stdout is line-buffered.  */
+
+#ifdef HAVE_SETVBUF
+# ifdef SETVBUF_REVERSED
+  setvbuf (stdout, _IOLBF, xmalloc (BUFSIZ), BUFSIZ);
+# else  /* setvbuf not reversed.  */
+  /* Some buggy systems lose if we pass 0 instead of allocating ourselves.  */
+  setvbuf (stdout, 0, _IOLBF, BUFSIZ);
+# endif /* setvbuf reversed.  */
+#elif HAVE_SETLINEBUF
+  setlinebuf (stdout);
+#endif  /* setlinebuf missing.  */
+
+  /* Force stdout/stderr into append mode.  This ensures parallel jobs won't
+     lose output due to overlapping writes.  */
+  set_append_mode (fileno (stdout));
+  set_append_mode (fileno (stderr));
+
+#ifdef HAVE_ATEXIT
+  if (STREAM_OK (stdout))
+    atexit (close_stdout);
+#endif
+}
+
+void
+output_close (struct output *out)
+{
+  if (! out)
+    {
+      if (stdio_traced)
+        log_working_directory (0);
+      return;
+    }
+
+#ifndef NO_OUTPUT_SYNC
+  output_dump (out);
+#endif
+
+  if (out->out >= 0)
+    close (out->out);
+  if (out->err >= 0 && out->err != out->out)
+    close (out->err);
+
+  output_init (out);
+}
+
+/* We're about to generate output: be sure it's set up.  */
+void
+output_start ()
+{
+#ifndef NO_OUTPUT_SYNC
+  /* If we're syncing output make sure the temporary file is set up.  */
+  if (output_context && output_context->syncout)
+    if (! OUTPUT_ISSET(output_context))
+      setup_tmpfile (output_context);
+#endif
+
+  /* If we're not syncing this output per-line or per-target, make sure we emit
+     the "Entering..." message where appropriate.  */
+  if (output_sync == OUTPUT_SYNC_NONE || output_sync == OUTPUT_SYNC_RECURSE)
+    if (! stdio_traced && print_directory_flag)
+      stdio_traced = log_working_directory (1);
+}
+
+void
+outputs (int is_err, const char *msg)
+{
+  if (! msg || *msg == '\0')
+    return;
+
+  output_start ();
+
+  _outputs (output_context, is_err, msg);
+}
+
+
+static struct fmtstring
+  {
+    char *buffer;
+    size_t size;
+  } fmtbuf = { NULL, 0 };
+
+static char *
+get_buffer (size_t need)
+{
+  /* Make sure we have room.  NEED includes space for \0.  */
+  if (need > fmtbuf.size)
+    {
+      fmtbuf.size += need * 2;
+      fmtbuf.buffer = xrealloc (fmtbuf.buffer, fmtbuf.size);
+    }
+
+  fmtbuf.buffer[need-1] = '\0';
+
+  return fmtbuf.buffer;
+}
+
+/* Print a message on stdout.  */
+
+void
+message (int prefix, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  char *p;
+
+  len += strlen (fmt) + strlen (program) + INTSTR_LENGTH + 4 + 1 + 1;
+  p = get_buffer (len);
+
+  if (prefix)
+    {
+      if (makelevel == 0)
+        sprintf (p, "%s: ", program);
+      else
+        sprintf (p, "%s[%u]: ", program, makelevel);
+      p += strlen (p);
+    }
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, "\n");
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (0, fmtbuf.buffer);
+}
+
+/* Print an error message.  */
+
+void
+error (const gmk_floc *flocp, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  char *p;
+
+  len += (strlen (fmt) + strlen (program)
+          + (flocp && flocp->filenm ? strlen (flocp->filenm) : 0)
+          + INTSTR_LENGTH + 4 + 1 + 1);
+  p = get_buffer (len);
+
+  if (flocp && flocp->filenm)
+    sprintf (p, "%s:%lu: ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
+    sprintf (p, "%s: ", program);
+  else
+    sprintf (p, "%s[%u]: ", program, makelevel);
+  p += strlen (p);
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, "\n");
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (1, fmtbuf.buffer);
+}
+
+/* Print an error message and exit.  */
+
+void
+fatal (const gmk_floc *flocp, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  const char *stop = _(".  Stop.\n");
+  char *p;
+
+  len += (strlen (fmt) + strlen (program)
+          + (flocp && flocp->filenm ? strlen (flocp->filenm) : 0)
+          + INTSTR_LENGTH + 8 + strlen (stop) + 1);
+  p = get_buffer (len);
+
+  if (flocp && flocp->filenm)
+    sprintf (p, "%s:%lu: *** ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
+    sprintf (p, "%s: *** ", program);
+  else
+    sprintf (p, "%s[%u]: *** ", program, makelevel);
+  p += strlen (p);
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, stop);
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (1, fmtbuf.buffer);
+
+  die (MAKE_FAILURE);
+}
+
+/* Print an error message from errno.  */
+
+void
+perror_with_name (const char *str, const char *name)
+{
+  const char *err = strerror (errno);
+  OSSS (error, NILF, _("%s%s: %s"), str, name, err);
+}
+
+/* Print an error message from errno and exit.  */
+
+void
+pfatal_with_name (const char *name)
+{
+  const char *err = strerror (errno);
+  OSS (fatal, NILF, _("%s: %s"), name, err);
+
+  /* NOTREACHED */
+}
diff --git a/output.h b/output.h
new file mode 100644
index 0000000..7c5332c
--- /dev/null
+++ b/output.h
@@ -0,0 +1,51 @@
+/* Output to stdout / stderr for GNU make
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+struct output
+  {
+    int out;
+    int err;
+    unsigned int syncout:1;     /* True if we want to synchronize output.  */
+ };
+
+extern struct output *output_context;
+extern unsigned int stdio_traced;
+
+#define OUTPUT_SET(_new)    do{ output_context = (_new)->syncout ? (_new) : NULL; }while(0)
+#define OUTPUT_UNSET()      do{ output_context = NULL; }while(0)
+
+#define OUTPUT_TRACED()     do{ stdio_traced = 1; }while(0)
+#define OUTPUT_IS_TRACED()  (!!stdio_traced)
+
+FILE *output_tmpfile (char **, const char *);
+
+/* Initialize and close a child output structure: if NULL do this program's
+   output (this should only be done once).  */
+void output_init (struct output *out);
+void output_close (struct output *out);
+
+/* In situations where output may be about to be displayed but we're not
+   sure if we've set it up yet, call this.  */
+void output_start (void);
+
+/* Show a message on stdout or stderr.  Will start the output if needed.  */
+void outputs (int is_err, const char *msg);
+
+#ifndef NO_OUTPUT_SYNC
+int output_tmpfd (void);
+/* Dump any child output content to stdout, and reset it.  */
+void output_dump (struct output *out);
+#endif
diff --git a/po/LINGUAS b/po/LINGUAS
new file mode 100644
index 0000000..d9ba7f4
--- /dev/null
+++ b/po/LINGUAS
@@ -0,0 +1,5 @@
+# Set of available languages: 25 languages
+
+be cs da de es fi fr ga gl he hr id it ja ko lt nl pl pt_BR ru sv tr uk vi zh_CN
+
+# Can't seem to get en@quot and en@boldquot to build properly?
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
new file mode 100644
index 0000000..83d8838
--- /dev/null
+++ b/po/Makefile.in.in
@@ -0,0 +1,444 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.18
+GETTEXT_MACRO_VERSION = 0.18
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+	@echo "$(MSGFMT) -c -o $@ $<"; \
+	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: check-macro-version all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+	@test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch stamp-po" && \
+	  echo timestamp > stamp-poT && \
+	  mv stamp-poT stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
+	  package_gnu='GNU '; \
+	else \
+	  package_gnu=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_gnu}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	$(MAKE) update-po
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/Makevars b/po/Makevars
new file mode 100644
index 0000000..b69192e
--- /dev/null
+++ b/po/Makevars
@@ -0,0 +1,59 @@
+# This is a -*-Makefile-*-
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = bug-make@gnu.org
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
diff --git a/po/POTFILES.in b/po/POTFILES.in
new file mode 100644
index 0000000..4287c5d
--- /dev/null
+++ b/po/POTFILES.in
@@ -0,0 +1,45 @@
+# List of source files containing translatable strings.
+# Copyright (C) 2000-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ar.c
+arscan.c
+commands.c
+dir.c
+expand.c
+file.c
+function.c
+getopt.c
+guile.c
+hash.c
+implicit.c
+job.c
+job.h
+load.c
+main.c
+misc.c
+output.c
+read.c
+remake.c
+remote-cstms.c
+rule.c
+signame.c
+strcache.c
+variable.c
+variable.h
+vmsfunctions.c
+vmsjobs.c
+vpath.c
diff --git a/po/Rules-quot b/po/Rules-quot
new file mode 100644
index 0000000..af52487
--- /dev/null
+++ b/po/Rules-quot
@@ -0,0 +1,47 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff --git a/po/be.gmo b/po/be.gmo
new file mode 100644
index 0000000..6c4ecf0
--- /dev/null
+++ b/po/be.gmo
diff --git a/po/be.po b/po/be.po
new file mode 100644
index 0000000..7385724
--- /dev/null
+++ b/po/be.po
@@ -0,0 +1,2192 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
+# Ales Nyakhaychyk <nab@mail.by>, 2002, 2003.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.80\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2003-10-21 11:50+0300\n"
+"Last-Translator: Ales Nyakhaychyk <nab@mail.by>\n"
+"Language-Team: Belarusian <i18n@mova.org>\n"
+"Language: be\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 0.9.6\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "�проба выкары�таць непадтрымліваемую мажліва�ьць: \"%s\""
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "дакрананьне да ўдзельніку архіва неда�тупна на VMS"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: архіў \"%s\" н� й�нуе"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: \"%s\" - г�та не р�чаі�ны архіў"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: удзельнік \"%s\" н� й�нуе ў \"%s\""
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr ""
+
+#: arscan.c:255
+#, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr ""
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (назва му�іла быць абр�зана)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Дата %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, р�жым = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr ""
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Выдал�ецца файл \"%s\""
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Выдал�ецца файл \"%s\""
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  загады дл� выкананьн�"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (убудаваны):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (з\"%s\", радок %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Т�чкі\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr ""
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr ""
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr ""
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr ""
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "�е"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " файлаў, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "не"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr ""
+
+#: dir.c:1068
+msgid " so far."
+msgstr " так далёка."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr ""
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr ""
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr ""
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr ""
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Выдал�ецца файл \"%s\""
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Выдал�юцца прамежкавы� файлы...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Б�гучы ча�"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: адбітак ча�у па-за дапушчальнымі межамі, пад�таўл�ецца %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# �� м�та:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr ""
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr ""
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "загадны радок"
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr ""
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr ""
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr ""
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr ""
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr ""
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Так �ама роб�цца:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Ча� зьм�неньн� ніколі не прав�раў��."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Файл н� й�нуе."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Файл вельмі �тары."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  �пошн�е зьм�неньне %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Файл быў абноўлены."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Файл н� быў абноўлены."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Загады, што выконваюцца зараз (ГЭТ� - П�МЫЛК�)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Загады, што выконваюцца зараз (ГЭТ� - П�МЫЛК�)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Па�ьп�хова абноўлены."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr ""
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr ""
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr ""
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Файлы"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr ""
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr ""
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe (): памылка ў process_init_fd()\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe (): памылка ў process_init_fd()\n"
+
+#: function.c:1530
+#, fuzzy, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "памылка ў CreatePipe() (e=%d)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): памылка ў process_init_fd()\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr ""
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr ""
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "�� зроблена дл� г�тае пл�тформы: функцы� \"%s\""
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr ""
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr ""
+
+#: function.c:2601
+#, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr ""
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: выбар \"%s\" - неадназначы.\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: выбар \"--%s\" не дазвал�е довад.\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: выбар \"%c%s\" не дазвал�е довад.\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: выбар \"%s\" патрабуе довад.\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: нера�пазнаны выбар \"--%s\".\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: нера�пазнаны выбар \"%c%s\".\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: недапушчальны выбар -- %c.\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: нер�чаі�ны выбар -- %c.\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: выбар патрабуе довад -- %c.\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: выбар \"-W %s\" - неадназначын.\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: выбар \"-W %s\" не дазвал�е довад.\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr ""
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr ""
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr ""
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr ""
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr ""
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Выдал�юцца прамежкавы� файлы...\n"
+
+#: job.c:361
+#, fuzzy
+msgid "Cannot create a temporary file\n"
+msgstr "fwrite (ча�овы файл)"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr ""
+
+#: job.c:488
+msgid " (ignored)"
+msgstr ""
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (убудаваны):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Памылка %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Памылка 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Чакаюцца незавершаны� працы...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr ""
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr ""
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr ""
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr ""
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ""
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr ""
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr ""
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ""
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr ""
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: архіў \"%s\" н� й�нуе"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s ��ма правіла каб зрабіць м�ту \"%s\", патр�бную дл� \"%s\"%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr ""
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: загад не адшуканы"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr ""
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL зьменена (раней \"%s\", зараз \"%s\")"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr ""
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Паралельн� працы (-j) не падтрымліваюцца на г�тае пл�тхорме."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Выбары:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr ""
+"  -h, --help                  Друкуе г�тае паведамленьне й выходзіць.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base        Друкуе нутраную базу даньн�ў make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+
+#: main.c:366
+#, fuzzy
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet        �е адлю�троўваць загады.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                               Выключае -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+"  -h, --help                  Друкуе г�тае паведамленьне й выходзіць.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory        Друкуе б�гучую т�чку.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "пу�ты радок нер�чаі�ны ў �ка�ьці назвы файла"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr ""
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr ""
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s �пынена на 30 ��кундаў..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr ""
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr ""
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr ""
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile �а �тандартнага ўводу зададзены двойчы."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (ча�овы файл)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (ча�овы файл)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Паралельн� працы (-j) не падтрымліваюцца на г�тае пл�тхорме."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr ""
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "�твараецца трубаправод прац"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr ""
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "�бнаўл�юцца make-файлы....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr ""
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Makefile \"%s\" н� знойдзен"
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefile \"%s\" н� знойдзен"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr ""
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr ""
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (ча�овы файл): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr ""
+
+#: main.c:2511
+msgid "No targets"
+msgstr "��ма м�т"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr ""
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Выкары�таньне: %s [выбары] [м�та] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Г�та праграма пабудавана дл� %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Г�та праграма падубавана дл� %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Паведамл�йце пра памылкі на <bug-make@gnu.org>.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "выбар \"-%c\" патрабуе �таноўчы ц�лы довад"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "выбар \"-%c\" патрабуе �таноўчы ц�лы довад"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"Г�та праграма пабудавана дл� %s\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"Г�та праграма падубавана дл� %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "�ев�дома� памылка %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: кары�тальнік %lu (на�амр�ч %lu), група %lu (на�амр�ч %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr ""
+
+#: misc.c:622
+msgid "User access"
+msgstr ""
+
+#: misc.c:670
+msgid "Make access"
+msgstr ""
+
+#: misc.c:704
+msgid "Child access"
+msgstr ""
+
+#: output.c:104
+#, fuzzy, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: уваход у нев�домую т�чку"
+
+#: output.c:106
+#, fuzzy, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: выхад зь нев�домае т�чкі"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: уваход у т�чку \"%s\"\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: выхад з т�чкі \"%s\"\n"
+
+#: output.c:115
+#, fuzzy, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: уваход у нев�домую т�чку"
+
+#: output.c:117
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: выхад зь нев�домае т�чкі"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: уваход у т�чку \"%s\"\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: выхад з т�чкі \"%s\"\n"
+
+#: output.c:495 output.c:497
+msgid "write error: stdout"
+msgstr ""
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ""
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Чытаюцца make-файлы...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Чытаецца make-файл \"%s\""
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (н�ма дапомнае м�ты)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (пошук шл�ху)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr ""
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr ""
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr ""
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr ""
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "прапушчана правіла перад загадамі"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (вы маеце на ўвазе TAB заме�т 8 прагалаў?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "прапушчан падз�л�льнік %s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr ""
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr ""
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr ""
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "прапушчаны \"endif\""
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr ""
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr ""
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "прапушчаны \"endef\", незавершаны \"define\""
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr ""
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr ""
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "зьнешні \"%s\""
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr ""
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr ""
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr ""
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr ""
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr ""
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr ""
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ""
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+
+#: read.c:2229
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr ""
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "�ічога н� было зроблена дл� \"%s\"."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "\"%s\" - �а�тар�л(а)."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "У�ё �ш� абнаўл�ецца файл \"%s\".\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%s ��ма правіла каб зрабіць м�ту \"%s\", патр�бную дл� \"%s\"%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s��ма правіла каб зрабіць м�ту \"%s\"%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr ""
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Файл \"%s\" ужо быў разгледжаны.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "У�ё �ш� абнаўл�ецца файл \"%s\".\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Скончана абнаўленьне файла \"%s\".\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Файл \"%s\" н� й�нуе.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr ""
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr ""
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr ""
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr ""
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Скончана абнаўленьне файла \"%s\".\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr ""
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Скончана абнаўленьне файла \"%s\".\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr ""
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ""
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Файл \"%s\" н� й�нуе.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr ""
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ""
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr ""
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "%s��ма правіла каб зрабіць м�ту \"%s\"%s"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr ""
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "%s��ма правіла каб зрабіць м�ту \"%s\"%s"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr ""
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ""
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "%s��ма правіла каб зрабіць м�ту \"%s\"%s"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr ""
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "�ев�домы ўбудаваны загад \"%s\".\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Увага! Файл \"%s\" мае ча� зьм�неньн�, �кі шч� не надышоў."
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Увага! Файл \"%s\" мае ча� зьм�неньн� %.2g �, �кі шч� не надышоў."
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ""
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr ""
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+
+#: rule.c:522
+msgid " terminal."
+msgstr " т�рмінал."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr ""
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "нев�домы �ыгнал"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr ""
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr ""
+
+#: signame.c:98
+msgid "Quit"
+msgstr ""
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "�едапушчальна� ін�трукцы�"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr ""
+
+#: signame.c:109
+msgid "Aborted"
+msgstr ""
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr ""
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr ""
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr ""
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Забіты"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Памылка шыны"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr ""
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Др�нны �ы�т�мны выклік"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Зламаны трубаправод"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr ""
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Завершаны"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr ""
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr ""
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr ""
+
+#: signame.c:156
+msgid "Power failure"
+msgstr ""
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Спынен"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Спынен (tty увод)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Спынен (вывад на tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Спынена (�ыгнал)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr ""
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr ""
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr ""
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr ""
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "�кно зьменена"
+
+#: signame.c:189
+msgid "Continued"
+msgstr ""
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr ""
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "магчым У/В"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr ""
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr ""
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr ""
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Сыгнал пагрозы"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Запыт аб зьве�тках"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr ""
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "аўтаматычна"
+
+#: variable.c:1602
+msgid "default"
+msgstr "дапомны"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "а��родзьдзе"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "make-файл"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr ""
+
+#: variable.c:1614
+msgid "command line"
+msgstr "загадны радок"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "дыр�ктыва \"override\""
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (з \"%s\", радок %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr ""
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Пераменны�\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "Увага! ��вызначана� пераменна� \"%.*s\""
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr ""
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr ""
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr ""
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr ""
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr ""
+
+#: vmsjobs.c:501
+#, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr ""
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "�ев�домы ўбудаваны загад \"%s\".\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Памылка! Парожні загад.\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Перанакіраваны ўвод з %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr ""
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "Перанакіраваны вывад у %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Перанакіраваны вывад у %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr ""
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr ""
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr " (пошук шл�ху)"
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "�е задавайце -j ці --jobs, калі sh.exe неда�тупны."
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%s    Г�та вольнае праграмнае забе�ьп�ч�ньне; гл�дзіце зыходны код дл�\n"
+#~ "%sпагадненьн� аб ра�паў�юджваньні. �� й�нуе �ІЯК�Е гарантыі, нават аб\n"
+#~ "%sмагчыма�ьці выкары�тньн� зь �кой небудзь м�тай.\n"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "віртуальна� пам�ць вычарпана"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "нер�чаі�на� дыр�ктыва \"override\""
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "н�ма назвы файла дл� \"%sinclude\""
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# ��ма файлаў."
+
+#~ msgid "DIRECTORY"
+#~ msgstr "ТЭЧК�"
+
+#~ msgid "FILE"
+#~ msgstr "Ф�ЙЛ"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "Чытае Ф�ЙЛ �к make-файл"
+
+#~ msgid "Entering"
+#~ msgstr "Уваход у"
+
+#~ msgid "Leaving"
+#~ msgstr "выхад з"
+
+#~ msgid "# No variables."
+#~ msgstr "# ��ма пераменных."
diff --git a/po/boldquot.sed b/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1�/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“�/""/g
+s/“/“/g
+s/�/�/g
+s/‘/‘/g
+s/’/’/g
diff --git a/po/cs.gmo b/po/cs.gmo
new file mode 100644
index 0000000..e8cbeaf
--- /dev/null
+++ b/po/cs.gmo
diff --git a/po/cs.po b/po/cs.po
new file mode 100644
index 0000000..9e6fa8b
--- /dev/null
+++ b/po/cs.po
@@ -0,0 +1,2312 @@
+# Czech translation of make.
+# Copyright (C) 2010 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Petr Pisar <petr.pisar@atlas.cz>, 2011, 2013.
+#
+# directive → klí�ové slovo (nepřekládat jako příkaz kvůli záměně)
+# hash → haš (zapisovat �esky)
+# chain → řetězec
+# jobserver → správce úloh
+# make (verb) → vyrobit
+# make (substantivum) → (program) make (skloňovat, nelze-li jinak)
+# makefile → makefile (nepřekládat, ale skloňovat)
+# (archive) member → prvek
+# (C structure) member → �len
+# pattern → vzor (nikoliv vzorek)
+# prerequisite → prerekvizita (předpoklad se nehodí jako duální slovo
+#   k target)
+# reap (child) → uklidit potomka
+# recipe → návod
+# target → cíl
+# token → token (nepřekládat)
+#
+# SECONDARY, INTERMEDIATE, PRECIOUS apod. nepřekládat, i když jsou použity
+# jako přívlastek. Jedná se o identifikátory jazyka make.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-09 21:24+0200\n"
+"Last-Translator: Petr Pisar <petr.pisar@atlas.cz>\n"
+"Language-Team: Czech <translation-team-cs@lists.sourceforge.net>\n"
+"Language: cs\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "pokus použít nepodporovanou vlastnost: „%s“"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "nastavení �asu změny prvku archivu není na VMS dostupné"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Archiv „%s“ neexistuje"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: „%s“ není platným archivem"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Prvek „%s“ v „%s“ neexistuje"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Chybný návratový kód z funkce ar_member_touch volané nad „%s“"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"funkce lbr$set_module() nedokázala vytáhnout údaje o modulu, status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "funkce lbr$ini_control() selhala se stavem = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "není možné otevřít knihovnu „%s“ potřebnou k najití prvku „%s“"
+
+# TODO: Pluralize
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Prvek „%s“%s: %'ld bajtů at %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (název může být zkrácen)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Datum %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  UID = %d, GID = %d, práva = 0%o\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Návod má příliš mnoho řádků (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Přerušeno.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Prvek archivu „%s“ je možná chybný, nesmazáno"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Prvek archivu „%s“ ne možná chybný, nesmazáno"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Maže se soubor „%s“"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Maže se soubor „%s“"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  spustitelný návod"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (vestavěný):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (z „%s“, řádek %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Adresáře\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: nebylo možné nad ním zavolat stat().\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (klí� %s, �as změny obsahu %d): nebylo možné otevřít.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (zařízení %d, iuzel [%d,%d,%d]): nebylo možné otevřít.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (zařízení %ld, iuzel %ld): nebylo možné otevřít.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (klí� %s, �as změny obsahu %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (zařízení %d, iuzel [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (zařízení %ld, iuzel %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Žádný"
+
+# TODO: Pluralize
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " souborů, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "žádný "
+
+# TODO: Pluralize
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " nemožností "
+
+#: dir.c:1068
+msgid " so far."
+msgstr " zatím."
+
+# TODO: Pluralize
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " nemožností v %lu adresářích.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekurzivní proměnná „%s“ odkazuje na sebe (nakonec)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "neukon�ený odkaz na proměnnou"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Návod byl ur�en pro soubor „%s“ v %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Návod pro soubor „%s“ byl nalezen hledáním implicitních pravidel,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "ale „%s“ se nyní považuje za soubor totožný s „%s“."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Návod pro „%s“ bude ignorován ve prospěch návodu pro „%s“."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"„%s“ s jednoduchou dvojte�kou nelze přejmenovat na „%s“ s dvojitou dvojte�kou"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"„%s“ s dvojitou dvojte�kou nelze přejmenovat na „%s“ s jednoduchou dvojte�kou"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "Maže se mezilehlý soubor „%s“ "
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Odstraňují se mezilehlé soubory…\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Aktuální �as"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Časový údaj mimo rozsah, nahrazuje se %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Není cílem:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Cenný soubor (prerekvizita k .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Falešný cíl (prerekvizita k .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Cíl příkazové řádky."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Default, MAKEFILES nebo -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Vestavěné pravidlo"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Hledalo se za pomoci implicitních pravidel."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Nehledalo se za pomoci implicitních pravidel."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Kořen implicitního/statického vzoru: „%s“\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Soubor je mezilehlá prerekvizita."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Rovněž vyrábí:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Čas změny obsahu se nikdy nekontroluje."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Soubor neexistuje."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Soubor je velmi starý."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Obsah naposledy změněn v %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Soubor byl aktualizován."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Soubor nebyl aktualizován."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Návod se právě vykonává (TOTO JE CHYBA)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Návod pro závislosti se právě vykonává (TOTO JE CHYBA)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Úspěšně aktualizováno."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Je třeba aktualizovat (-q je nastaveno)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Aktualizace selhala."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Neplatná hodnota v �lenu „command_state“!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Soubory"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# Statistika hašovací tabulky souborů:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Položka „%s“ není v keši: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "ne�íselný první argument funkce „word“"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "první argument funkce „word“ musí být vetší než 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "ne�íselný první argument funkce „wordlist“"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "ne�íselný druhý argument funkce „wordlist“"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(vstup) selhalo (chyba=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr ""
+"windows32_openpipe: DuplicateHandle(chybový výstup) selhalo (chyba=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() selhalo (chyba=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() selhalo\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Do�asný dávkový soubor %s se uklízí\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "otevření: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "zápis: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Neplatná operace na souboru: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "nedostate�ný po�et argumentů (%d) funkce „%s“"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "na této platformě neimplementováno: funkce „%s“"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "neukon�ené volání funkce „%s“: chybí „%c“"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Prázdný název funkce\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Neplatný název funkce: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Název funkce je příliš dlouhý: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Neplatný minimální po�et argumentů (%d) funkce %s\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Neplatný maximální po�et argumentů (%d) funkce %s\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: přepína� „%s“ není jednozna�ný\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: přepína�e „--%s“ nepřipouští argument\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: přepína� „%c%s“ nepřipouští argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: přepína� „%s“ vyžaduje argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: nerozpoznaný přepína� „--%s“\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: nerozpoznaný přepína� „%c%s“\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: zakázaný přepína� – %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: neplatný přepína� – %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: přepína� vyžaduje argument – %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: přepína� „-W %s“ není jednozna�ný\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: přepína� „-W %s“ nepřipouští argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Expanduje se „%s“\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Vyhodnocuje se „%s“\n"
+
+# TODO: Pluralize
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "nelze alokovat %lu bajtů na hašovací tabulku: paměť vy�erpána"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Zátěž = %ld/%ld = %.0f %%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Přehašováno = %d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Kolizí = %ld/%ld = %.0f %%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Hledá se implicitní pravidlo pro „%s“.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Hledá se implicitní pravidlo prvku archivu pro „%s“.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Zabraňuje se rekurzi implicitního pravidla.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Kořen je příliš dlouhý „%.*s“.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Zkouší se pravidlo vzoru s kořenem „%.*s“.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Zamítá se nemožná prerekvizita pravidla „%s“.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Zamítá se nemožná implicitní prerekvizita „%s“.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Zkouší se prerekvizita pravidla „%s“.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Zkouší se implicitní prerekvizita „%s“.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Nalezena prerekvizita „%s“ jako VPATH „%s“\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Hledá se pravidlo s mezilehlým souborem „%s“.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Do�asný soubor nelze vytvořit\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (obraz paměti uložen)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignorováno)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<vestavěný>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: návod pro cíl „%s“ selhal"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Chyba %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Chyba 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Čeká se na nedokon�ené úlohy…"
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Živý potomek %p (%s) PID %s %s\n"
+
+# Continuation of Live child
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (vzdálený)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Uklízí se prohrávající potomek %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Uklízí se vyhrávající potomek %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Uklízí se do�asný dávkový soubor %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Úklid do�asného dávkového souboru %s selhal (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Z řetězce se odstraňuje potomek %p PID %s%s.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "uvolnění semaforu správce úloh: (Chyba %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Uvolněn token pro potomka %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "zápis správce úloh"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() nedokázala spustit proces (chyba=%ld)\n"
+
+# FIXME: Pluralize
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Napo�ítáno %d argumentů v selhaném spuštění\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Do řetězce se přidává potomek %p (%s) PID %s%s.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "�ekání na semafor nebo potomka: (Chyba %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Získán token pro potomka %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "�tení z roury úloh"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: cíl „%s“ neexistuje"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: aktualizovat cíl „%s“ potřebný pro %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "na tomto opera�ním systému nelze vynutit omezení zátěže"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "omezení zátěže nelze vynutit: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "nedostatek deskriptorů souboru: standardní vstup nelze zduplikovat\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "nedostatek deskriptorů souboru: standardní výstup nelze zduplikovat\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "nedostatek deskriptorů souboru: chybový výstup nelze zduplikovat\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Standardní vstup nelze obnovit\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Standardní výstup nelze obnovit\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Chybový výstup nelze obnovit\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make uklidil potomka s PID %s, stále se �eká na PID %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Příkaz nenalezen"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Program shellu nenalezen"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: možná byl vy�erpán prostor pro prostředí"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "Proměnná $SHELL se změnila (byla „%s“, nyní je „%s“)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Vytváří se do�asný dávkový soubor %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Obsah dávkového souboru:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Obsah dávkového souboru:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (řádek %d) Chybný kontext shellu (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"Přepína� -O[DRUH] (--output-sync[=DRUH]) není v tomto sestavení zahrnut."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Nepodařilo se otevřít tabulku globálních symbolů: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Zavedený objekt %s není veden jako slu�itelný s GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Symbol %s z %s se nepodařilo zavést: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Pokus zavést prázdný název symbolu: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Zavádí se symbol %s z %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Na této platformě není operace zavedení (load) podporována."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Přepína�e:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignoruje se kvůli kompatibilitě.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Bezpodmíne�ně vyrobí všechny cíle.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C ADRES�Ř, --directory=ADRES�Ř\n"
+"                              Před děláním �ehokoliv se přepne do ADRES�ŘE.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Vypisuje mnoho ladicích údajů.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=PŘ�ZNAKY]          Vypisuje ladicí údaje rozli�ných druhů.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Proměnné prostředí přebijí ty z makefilu.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr "  --eval=ŘETĚZEC              Vyhodnotí ŘETĚZEC jako kód makefilu.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f SOUBOR, --file=SOUBOR, --makefile=SOUBOR\n"
+"                              Na�te SOUBOR coby makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Vypíše tuto zprávu a skon�í.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Ignoruje chyby z návodů.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I ADRES�Ř, --include-dir=ADRES�Ř\n"
+"                              Vložené makefily hledá v ADRES�ŘI.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Dovolí nejvíce N úloh najednou;\n"
+"                              nekone�no úloh bez argumentu.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Pokra�uje, když některé cíle nelze vyrobit.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Nespouští souběžné úlohy, dokud zátěž\n"
+"                              neklesne pod N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Použije nejnovější �as změny obsahu z �asů\n"
+"                              symbolických odkazů a cíle.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Ve skute�nosti nevykoná žádný návod, pouze\n"
+"                              jej vypíše.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o SOUBOR, --old-file=SOUBOR, --assume-old=SOUBOR\n"
+"                              Považuje SOUBOR za velmi starý a znovu jej\n"
+"                              nevyrobí.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[DRUH], --output-sync[=DRUH]\n"
+"                              Synchronizuje výstup souběžných úloh podle "
+"DRUHU.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Vypíše vnitřní databázi programu make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Nespustí žádný návod. Návratový kód řekne,\n"
+"                              jestli je aktuální.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      Vypne vestavěná implicitní pravidla.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  Vypne vestavěné nastavení proměnných.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Neopisuje návod.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Vypne -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "  -t, --touch                 Namísto výroby cílů jim změní �as.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Vypisuje trasovací údaje.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Vypíše �íslo verze programu make a skon�í.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Vypisuje aktuální adresář.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Vypne -w, i kdyby byl zapnut implicitně.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W SOUBOR, --what-if=SOUBOR, --new-file=SOUBOR, --assume-new=SOUBOR\n"
+"                              Považuje SOUBOR za nekone�ně nový.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Upozorní, kdykoliv je odkazováno na\n"
+"                              nedefinovanou proměnnou.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "prázdný řetězec není platný název souboru"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "zadána neznámá úroveň ladění „%s“"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "neznámý druh synchronizace výstupu „%s“"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Zachyceno přerušení/výjimka (kód = 0x%lx, adresa = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filtr neošetřených výjimek zavolán z programu %s\n"
+"Kód výjimky = %lx\n"
+"Příznaky výjimky = %lx\n"
+"Adresa výjimky = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Porušení přístupu: operace zápisu na adrese 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Porušení přístupu: operace �tení na adrese 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() nastavuje default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"find_and_set_shell() při prohledávání cesty nastavila default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s se uspí na 30 sekund…"
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) dokon�eno. Pokra�uje se.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"vnitřní chyba: nelze otevřít semafor správce úloh „%s“: (Chyba %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Klient správce úloh (semafor %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "vnitřní chyba: neplatný řetězec --jobserver-fds „%s“"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Klient správce úloh (deskriptory %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "pozor: -jN vnuceno podřízenému maku: režim správce úloh se vypíná."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "služba dup() nad správcem úloh"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"pozor: správce úloh není dostupný: použije se -j1. Do nadřízeného pravidla "
+"maku přidejte „+“."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile na standardním vstupu uveden dvakrát."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (do�asný soubor)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (do�asný soubor)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Na této platformě nejsou paralelní úlohy (-j) podporovány."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Návrat k jednoúlohovému režimu (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Místa ve správci úloh jsou omezena na %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "vytváření semaforu správce úloh: (Chyba %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "vytváření roury úloh"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inicializace roury správce úloh"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Symbolické odkazy nejsou podporovány: vypíná se -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Soubory makefile se aktualizují…\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefile „%s“ může cyklit, nebude znovu vyroben.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Výroba nového makefilu „%s“ selhala."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Vložený makefile „%s“ nebyl nalezen."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefile „%s“ nebyl nalezen"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Nebylo možné se vrátit do původního adresáře."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Znovu se spouští [%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (do�asný soubor): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL obsahuje více než jeden cíl"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nezadány žádné cíle a žádné makefily nenalezeny"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Žádné cíle"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Aktualizují se cíle…\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "pozor: Zjištěn posun hodin. Vaše sestavení možná nebude úplné."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Použití: %s [PŘEP�NAČE] [C�LE]…\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Tento program byl sestaven pro %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Tento program byl sestaven pro %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Chyby v programu hlaste anglicky na <bug-make@gnu.org>. Nedostatky\n"
+"v překladu hlaste �esky na <translation-team-cs@lists.sourceforge.net>.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "přepína�e „%s%s“ vyžaduje neprázdný řetězcový argument"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "přepína� „-%c“ vyžaduje kladný celo�íselný argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sSestaveno pro %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%s Sestaveno pro %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicence GPLv3+: GNU GPL verze 3 nebo novější <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sToto je svobodné programové vybavení: máte právo jej měnit a dále šířit.\n"
+"%sNesposkytuje se Ž�DN� Z�RUKA, jak jen zákon dovoluje.\n"
+
+# FIXME: i18n %s (time)
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Databáze maku vypsána v %s"
+
+# FIXME: i18n %s (time)
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Konec databáze maku v %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Neznámá chyba %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: uživatel %lu (reálný %lu), skupina %lu (reálná %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Přístup zahájen"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Přístup uživatelem"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Přístup makem"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Přístup potomkem"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Vstupuje se do neznámého adresáře\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s Opouští se neznámý adresář\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Vstupuje se do adresáře „%s“\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Opouští se adresář „%s“\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Vstupuje se do neznámého adresáře\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Opouští se neznámý adresář\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Vstupuje se do adresáře „%s“\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Opouští se adresář „%s“\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "chyba zápisu: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Konec.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Čtou se makefily…\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Čte se makefile „%s“"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (žádný výchozí cíl)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (vyhledávací cesta)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (nestarat se)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (žádný expanze ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Přeskakuje se UTF-8 BOM v makefilu „%s“\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Přeskakuje se UTF-8 BOM v paměti makefilu\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "neplatná syntaxe podmínky"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: zavedení selhalo"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "návod zahájen před prvním cílem"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "před návodem chybí pravidlo"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (mysleli jste tabulátor místo 8 mezer?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "chybí oddělova�%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "chybí vzor cíle"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "více vzorů cíle"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "vzor cíle neobsahuje „%%“"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "chybí „endif“"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "prázdný název proměnné"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "nadbyte�ný text po klí�ovém slovu „define“"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "chybí „endef“, neukon�ený „define“"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "nadbyte�ný text po klí�ovém slovu „endef“"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "nadbyte�ný text po klí�ovém slovu „%s“"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "nadbyte�ný „%s“"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "pouze jeden „else“ na podmínku"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Chybě utvořená definice proměnné specifické pro cíl"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "prerekvizitu nelze definovat v návodu"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "smíšené implicitní a statická pravidla vzorů"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "smíšené implicitní a normální pravidla"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "cíl „%s“ neodpovídá vzoru cíle"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "cílový soubor „%s“ obsahuje jak :, tak i ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "cíl „%s“ zadán více než jednou ve stejném pravidle"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "pozor: návod pro cíl „%s“ bude přebit"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "pozor: starý návod pro cíl „%s“ bude ignorován"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "smíšené implicitní a normální pravidla"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "pozor: zaznamenán znak NUL, zbytek řádku bude ignorován"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Pro „%s“ nebude nic uděláno."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "„%s“ je aktuální."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Uklízí se soubor „%s“.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sŽádné pravidlo jak vyrobit cíl „%s“ potřebný pro „%s“%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sŽádné pravidlo jak vyrobit cíl „%s“%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Zvažuje se cílový soubor „%s“.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Nedávná aktualizace souboru „%s“ selhala.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Soubor „%s“ již byl uvážen.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Stále se aktualizuje soubor „%s“.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Aktualizace soubor „%s“ dokon�ena.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Soubor „%s“ neexistuje.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Pozor: Soubor .LOW_RESOLUTION_TIME „%s“ má �asový údaj ve vysokém "
+"rozlišení"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Nalezeno implicitní pravidlo pro „%s“.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Pro „%s“ nenalezeno žádné implicitní pravidlo.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Pro „%s“ se použije výchozí návod.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Kruhová závislost „%s � %s zahozena."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Prerekvizity cílového souboru „%s“ dokon�eny.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Prerekvizity „%s“ se vyrábějí.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Výroba cílového souboru „%s“ vzdána.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Cíl „%s“ nebyl kvůli chybám znovu vyroben."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Prerekvizita „%s“ pro cíl „%s“ je jen o pořadí.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Prerekvizita „%s“ cíle „%s“ neexistuje.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Prerekvizita „%s“ je novější než cíl „%s“.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Prerekvizita „%s“ je starší než cíl „%s“.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Cíl „%s“ je dvojdvoute�kový a nemá žádnou prerekvizitu.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Pro „%s“ neexistuje návod a žádná prerekvizita se vskutku nezměnila.\n"
+
+# Always-make flag is make option -B
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Vyrábí se „%s“ kvůli přepína�i --always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Cíl „%s“ není třeba znovu vyrábět"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; použije se název „%s“ z VPATH"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Cíl „%s“ je třeba znovu vyrobit.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ignoruje se název „%s“ z VPATH.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Právě se vykonává návod pro „%s“.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Cílový soubor „%s“ nebylo možné znovu vyrobit.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Cílový soubor „%s“ byl úspěšně znovu vyroben.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Cílový soubor „%s“ je třeba znovu vyrobit za použití -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Pro „%s„ se použijí se výchozí příkazy.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Pozor: Soubor „%s“ má �as změny obsahu v budoucnu"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Pozor: Soubor „%s“ má �as změny obsahu %s s směrem do budoucnosti"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Prvek .LIBPATTERNS „%s“ není vzorem"
+
+# `Customs' is literal (a library name). See README.customs.
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs nebude exportovat: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Implicitní pravidla"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Žádná implicitní pravidla."
+
+# FIXME: Pluralize by first %u
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# Implicitních pravidel: %u, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminál."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "CHYBA: num_pattern_rules je chybný! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "neznámý signál"
+
+# Keep signal names in sync with GNU libc translations.
+#: signame.c:92
+msgid "Hangup"
+msgstr "Odpojen terminál (SIGHUP)"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Přerušení (SIGINT)"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Konec (SIGQUIT)"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Nedovolená instrukce (SIGILL)"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Trasovací/ladící past (SIGTRAP)"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Neúspěšně ukon�en (SIGABRT)"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT past (SIGIOT)"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT past (SIGEMT)"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Výjimka práce s pohyblivou řádovou �árkou (SIGFPE)"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Zabit (SIGKILL)"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Chyba na sběrnici (neplatná adresa) (SIGBUS)"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Neoprávněný přístup do paměti (SIGSEGV)"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Chybné volání systému (SIGSYS)"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Roura přerušena (SIGPIPE)"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Budík (SIGALRM)"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Ukon�en (SIGTERM)"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Uživatelem definovaný signál 1 (SIGUSR1)"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Uživatelem definovaný signál 2 (SIGUSR2)"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Potomek skon�il (SIGCHLD)"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Výpadek napájení (SIGPWR)"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Pozastaven (SIGTSTP)"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Pozastaven (vstup TTY) (SIGTTIN)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Pozastaven (výstup TTY) (SIGTTOU)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Pozastaven (SIGSTOP)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Překro�en �asový limit pro procesor (SIGXCPU)"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Překro�en limit délky souboru (SIGXFS2)"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtuální �asova� vypršel (SIGVTALRM)"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profilovací �asova� vypršel (SIGPROF)"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Okno se změnilo (SIGWINCH)"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Je pokra�ováno (SIGCONT)"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Naléhavá I/O situace (SIGURG)"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Vstup/Výstup možný (SIGIO)"
+
+# SIGWIND exists on Darwin
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "Okno se změnilo (SIGWIND)"
+
+# SIGPHONE exists on Unix PC (3B1)
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "Změna stavu linky (SIGPHONE)"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Prostředek byl ztracen (SIGLOST)"
+
+# SIGDANGER exists on AIX
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Nebezpe�í nedostatku paměti (SIGDANGER)"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Žádost o informaci (SIGINFO)"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Koprocesor pro práci s pohyblivou řádkou není dostupný (SIGNOFP)"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Žádná keš řetězců\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s užito z keše řetězců: %lu (%lu) / řetězců = %lu / úložiště = %lu B / "
+"prům.  = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s sou�asná keš: velikost = %hu B / užito = %hu B / po�et = %hu / prům. = "
+"%hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s užito dalších: celkem = %lu B / po�et = %lu / prům. = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s volno dalších: celkem = %lu B / max. = %lu B / min. = %lu B / prům.  = "
+"%hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s vytížení keše řetězců: dotazů = %lu / poměr nálezů = %lu %%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# Statistika hašovací tabulky:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatická"
+
+#: variable.c:1602
+msgid "default"
+msgstr "výchozí"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "prostředí"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "prostředí z přepína�e -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "příkazový řádek"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "klí�ové slovo „override“"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (z „%s“, řádek %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statistika hašovací tabulky pro množinu proměnných:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Proměnné\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Hodnoty proměnných specifických pro vzor"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Žádné hodnoty proměnných specifických pro vzor."
+
+# FIXME: Pluralize
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# Hodnot proměnných specifických pro vzor: %u"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "pozor: nedefinovaná proměnná „%.*s“"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "volání sys$search() selhalo s %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Pozor: Prázdné přesměrování\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "vnitřní chyba: command_state pro „%s“"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-pozor, možná byste měli znovu povolit obsluhu CTRL-Y z DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "VESTAVĚN� [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "VESTAVĚN� CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "VESTAVĚN� CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Neznámý vestavěný příkaz „%s“\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Chyba, prázdný příkaz\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Vstup přesměrován z %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Chyby přesměrovány do %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Výstup připojen k %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Výstup přesměrován do %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Připojit %.*s a uklidit\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Místo toho se spustí %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Chyba oddělení podprocesu, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Vyhledávací cesty VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Žádné vyhledávací cesty „vpath“."
+
+# FIXME: Pluralize
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"$ Vyhledávacích cest „vpath“: %u\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Žádná obecná vyhledávací cesta (proměnná „VPATH“)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Obecná vyhledávací cesta (proměnná „VPATH“):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "vnitřní chyba: více přepína�ů --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "vnitřní chyba: více přepína�ů --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "virtuální paměť vy�erpána"
+
+#~ msgid "write error"
+#~ msgstr "chyba zápisu"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "VESTAVĚN� RM %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  Neplatná hodnota v �lenu „update_status“!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "neznámý režim trasování „%s“"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Chyba 0x%x (ignorováno)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Za ú�elem aktualizace cíle „%3$s“ se volá se návod z %1$s:%2$lu.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Za ú�elem aktualizace cíle „%s“ se volá vestavěný návod.\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr ""
+#~ "%s po�et vyrovnávacích pamětí keše řetězců: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# statistika hašovací tabulky keše řetězců:\n"
+#~ "# "
diff --git a/po/da.gmo b/po/da.gmo
new file mode 100644
index 0000000..02fa310
--- /dev/null
+++ b/po/da.gmo
diff --git a/po/da.po b/po/da.po
new file mode 100644
index 0000000..8640291
--- /dev/null
+++ b/po/da.po
@@ -0,0 +1,2360 @@
+# Danish messages for make
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# Byrial Ole Jensen <byrial@image.dk>, 2001
+# Ask Hjorth Larsen <asklarsen@gmail.com>, 2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.82\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2011-01-05 02:26+0100\n"
+"Last-Translator: Ask Hjorth Larsen <asklarsen@gmail.com>\n"
+"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
+"Language: da\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "forsøg på at bruge en ikke understøttet facilitet: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "'berør arkivmedlem' er ikke tilgængelig på VMS"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Arkivet '%s' findes ikke"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s' er ikke et gyldigt arkiv"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Medlemmet '%s' findes ikke i '%s'"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Forkert returkode fra ar_member_touch på '%s'"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() kunne ikke udtrække modulinformation, status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() fejlede med status = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "kan ikke åbne biblioteket '%s' for at søge medlemmet '%s'"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Medlem '%s'%s: %ld byte ved %ld (/%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (navnet kan være forkortet)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Tidsstempel %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modus = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Afbrydelse.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Arkivmedlemmet '%s' er måske falsk; ikke slettet"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Arkivmedlemmet '%s' er måske falsk; ikke slettet"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Sletter filen '%s'"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Sletter filen '%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  kommandoer der skal køres"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (indbyggede):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (fra '%s', linje %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Filkataloger\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: kunne ikke undersøges med stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (nøgle %s, mtime %d): kunne ikke åbnes.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (enhed %d, inode [%d,%d,%d]): kunne ikke åbnes.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (enhed %ld, inode %ld): kunne ikke åbnes.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (nøgle %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (enhed %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (enhed %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Ingen"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " filer, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "ingen"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " umuligheder"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " indtil videre."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " umuligheder i %lu kataloger.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekursiv variabel '%s' refererer (i sidste ende) til sig selv"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "uafsluttet variabelreference"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Kommandoer blev angivet for filen '%s' i %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Kommandoer for filen '%s' blev fundet ved implicit regelsøgning,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "men '%s' bliver nu anset som samme fil som '%s'."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Kommandoer for '%s' vil blive ignoreret til fordel for de for '%s'."
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "kan ikke ændre enkelt-kolon '%s' til dobbelt-kolon '%s'"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "kan ikke ændre dobbelt-kolon '%s' til enkelt-kolon '%s'"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Sletter mellemfil '%s'"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Sletter mellemfiler ...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Aktuel tid"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Tidsstempel i forkert område; bruger %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Ikke et mål:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Værdifuld fil (forudsætning for .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Falsk mål (forudsætning for .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Kommandolinjemål."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Et forvalg, MAKEFILES, eller -include/sinclude makefile."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Ingen implicitte regler."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Der er udført implicit regelsøgning."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Der er ikke udført implicit regelsøgning."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Implicit/statisk mønsterstamme: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Filen er en mellemfil."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Skaber også:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Ændringstid ikke tjekket."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Filen findes ikke."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Filen er meget gammel."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Sidst ændret %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Filen er blevet opdateret."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Filen er ikke blevet opdateret."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Der køres kommandoer nu (DETTE ER EN FEJL)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Kommandoer for afhængigheder køres nu (DETTE ER EN FEJL)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Opdateret med godt resultat."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Behøver opdatering (-q er sat)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Opdatering mislykkedes."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Ugyldig værdi i 'command_state'-felt!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Filer"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# Statistik for fil-hash-spande:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "ikke-numerisk første argument til 'word'-funktionen"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "første argument til 'word'-functionen skal være større end 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "ikke-numerisk første argument til 'wordlist'-funktionen"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "ikke-numerisk andet argument til 'wordlist'-funktionen"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): DuplicateHandle(In) mislykkedes (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_open_pipe(): DuplicateHandle(Err) mislykkedes (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() mislykkedes (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() mislykkedes\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Afrydder midlertidig batchfil %s\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "skrivefejl: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "utilstrækkeligt antal argumenter (%d) til funktionen '%s'"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "ikke implementeret på denne platform: funktion '%s'"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "uafsluttet kald til funktionen '%s'; manglende '%c'"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "utilstrækkeligt antal argumenter (%d) til funktionen '%s'"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "utilstrækkeligt antal argumenter (%d) til funktionen '%s'"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: tilvalg '%s' er flertydigt\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: tilvalg '--%s' tillader ikke et argument\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: tilvalg '%c%s' tillader ikke et argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s tilvalg '%s' kræver et argument\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: ikke genkendt tilvalg '--%s'\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: ikke genkendt tilvalg '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: ulovligt tilvalg -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: ugyldigt tilvalg -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: tilvalg kræver et argument -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: tilvalg '-W %s' er flertydigt\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: tilvalg '-W %s' tillader ikke et argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "kan ikke tildele %lu byte til hashtabel: hukommelsen opbrugt"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Fyldning=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Omgrupperinger=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Sammenstød=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Kigger efter en implicit regel for '%s'.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Kigger efter en implicit arkivmedlemsregel for '%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Undgår rekursion i implicitte regler.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Prøver mønsterregel med stammen '%.*s'.\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Afviser umulig regelforudsætning '%s'.\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Afviser umulig implicit forudsætning '%s'.\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Prøver regelforudsætning '%s'.\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Prøver implicit forudsætning '%s'.\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Fandt forudsætning '%s' som VPATH '%s'\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Kigger efter en regel med mellemfil '%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Kan ikke oprette midlertidig fil\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core-fil efterladt)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Fejl %d (ignoreret)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (indbyggede):"
+
+#: job.c:503
+#, fuzzy, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "advarsel: tilsidesætter kommandoer for mål '%s'"
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Fejl %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Fejl 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Venter på uafsluttede job...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Levende underproces %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (eksternt)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Høster tabende underproces %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Høster vindende underproces %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Afrydder midlertidig jobfil %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Afrydder midlertidig jobfil %s\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Fjerner underproces %p PID %s%s fra kæde.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Frigav symbol for underproces %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "write jobserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() fejlede ved igangsætning af proces (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Talte %d argumenter i fejlet igangsætning\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Sætter underproces %p (%s) PID %s%s på kæden.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Fik symbol for underproces %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "read jobs pipe"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Arkivet '%s' findes ikke"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%sIngen regel til at skabe mål '%s' som behøves af '%s'%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "kan ikke gennemtvinge belastningsgrænser på dette styrestystem"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "kan ikke gennemtvinge belastningsgrænse: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "ikke flere filhåndtag: Kunne ikke duplikere stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "ikke flere filhåndtag: Kunne ikke duplikere stdout\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "ikke flere filhåndtag: Kunne ikke duplikere stdin\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Kunne ikke gendanne stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Kunne ikke gendanne stdout\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Kunne ikke gendanne stdin\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make høstede underproces med pid %s, venter endnu på pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Kommando ikke fundet"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s; Skalprogram ikke fundet"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: miljøplads er måske opbrugt"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL ændret (var '%s', nu '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Opretter midlertidig jobfil %s\n"
+
+#: job.c:3206
+#, fuzzy
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Indhold af batchfil:%s\n"
+"\t%s\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Indhold af batchfil:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (linje %d) Forkert skal-kontekst (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Parallelle job (-j) er ikke understøttet på denne platform."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Tilvalg:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignoreret af hensyn til kompabilitet.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Skab alle mål betingelsesløst.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C KATALOG, --directory=KATALOG\n"
+"                              Skift allerførst til KATALOG.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Udskriv en masse fejlsøgningsinformation.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAG]              Udskriv forskellige slags "
+"fejlsøgningsinformation.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Miljøvariable har forrang for makefiler.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=STRENG               Evaluér STRENG som en makefil-erklæring.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FIL, --file=FIL, --makefile=FIL\n"
+"                              Læs FIL som en makefil.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Udskriv denne besked og afslut.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Ignorér fejl fra kommandoer.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I KATALOG, --include-dir=KATALOG\n"
+"                              Søg i KATALOG efter inkluderede makefiler.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Tillad N samtidige job; uendelig mange job "
+"uden argument.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Fortsæt selvom nogen mål ikke kan skabes.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Start ikke flere job medmindre belastningen er "
+"under N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Brug sidste mtime mellem symbolske lænker og "
+"mål.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Udfør ikke nogen kommandoer; udskriv dem "
+"bare.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FIL, --old-file=FIL, --assume-old=FIL\n"
+"                              Anse FIL som værende meget gammel og genskab "
+"den ikke.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Udskriv makes interne database.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Udfør ingen kommandoer; afslutningskoden "
+"angiver\n"
+"                                om målet er tidssvarende.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Slå de indbyggede implicitte regler fra.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  Slå de indbyggede variabelværdier fra.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Udskriv ikke kommandoer.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Slår -k fra.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Berør mål i stedet for at genskabe dem.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+"  -d                          Udskriv en masse fejlsøgningsinformation.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Udskriv makes versionnummer og afslut.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Udskriv det aktuelle katalog.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Slå -w fra, selv hvis det var slået til "
+"automatisk.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FIL, --what-if=FIL, --new-file=FIL, --assume-new=FIL\n"
+"                              Anse FIL som værende nyskabt.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Advar når en udefineret variabel bruges.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "en tom streng er ugyldig som filnavn"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "ukendt fejlsøgningsniveau-specifikation '%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Afbrydelse/undtagelse fanget (kode = 0x%lx, addr = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Uhåndteret undtagelsesfilter kaldt fra program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Adgangskrænkelse: skriveoperation på adresse 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Adgangskrænkelse: læseoperation på adresse 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() sætter default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell()-stisøgning sætter default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s er standset i 30 sekunder..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "udført sleep(30). Fortsætter.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+# fd = fildeskriptor
+#: main.c:1530
+#, fuzzy, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Jobserverklient (fd'er %d,%d)\n"
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "intern fejl: ugyldig '--jobserver-fds'-streng '%s'"
+
+# fd = fildeskriptor
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Jobserverklient (fd'er %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "advarsel: tvunget -jN i undermake: slår jobserver tilstand fra."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"advarsel: jobserver ikke tilgængelig: bruger -j1. Tilføj '+' til "
+"ophavsmakeregel."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefil fra standard-ind er angivet to gange."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (midlertidig fil)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (midlertidig fil)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Parallelle job (-j) er ikke understøttet på denne platform."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Sætter tilbage til enkelt job-tilstand (-j1)."
+
+# fd = fildeskriptor
+#: main.c:1994
+#, fuzzy, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Jobserverklient (fd'er %d,%d)\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "oprettelse af jobledning"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "klargøring af jobserver-ledning"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Symbolske lænker understøttes ikke: Deaktiverer -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Opdaterer makefiler....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefilen '%s' får måske make til at gå i ring; genskaber den ikke.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Genskabelse af makefilen '%s' mislykkedes."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Inkluderet makefil '%s' blev ikke fundet."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefil '%s' blev ikke fundet."
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Kunne ikke skifte tilbage til det originale katalog."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Udfører igen[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (midlertidig fil): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL indeholder mere end et mål"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Ingen angivne mål og ingen makefil fundet"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Ingen mål"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Opdaterer endemål....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "advarsel: Fejl i urets tid opdaget. Din bygning kan være ukomplet."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Brug: %s [tilvalg] [mål] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Dette program er bygget til %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Dette program er bygget til %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Send fejlmeldinger (på engelsk) til <bug-make@gnu.org>.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "'-%s%s'-tilvalget kræver et strengargument, der ikke er tomt"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "'-%c'-tilvalget kræver et positivt heltalligt argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sBygget til %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sBygget til %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicens GPLv3+: GNU GPL v3 eller nyere <http://gnu.org/licenses/gpl.html>\n"
+"%sDette er frit programmel: Du kan frit ændre og videredistribuere det.\n"
+"%sDer gives INGEN GARANTI i den grad, som dette tillades af loven.\n"
+
+# %s giver dato og klokkeslæt
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Makedatabase, udskrevet %s"
+
+# %s giver dato og klokkeslæt
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Afsluttet makedatabase %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Ukendt fejl %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: bruger %lu (reelt %lu), gruppe %lu (reelt %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Indledende adgang"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Brugeradgang"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make-adgang"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Barneadgang"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: GÃ¥r til et ukendt katalog\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Forlader et ukendt katalog\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: GÃ¥r til katalog '%s'\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Forlader katalog '%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: GÃ¥r til et ukendt katalog\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Forlader et ukendt katalog\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: GÃ¥r til katalog '%s'\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Forlader katalog '%s'\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "skrivefejl: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Stop.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Læser makefiler...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Læser makefil '%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (ingen standard-endemål)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (søgesti)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (ikke nødvendig)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (ingen ~-udfoldning)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "ugyldig syntaks i betingelse"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "kommandoer begynder før første mål"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "manglende regel før kommandoer"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (mente du TAB i stedet for 8 mellemrum?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "manglende adskiller%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "manglende målmønster"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "flere målmønstre"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "målmønster indeholder ingen '%%'"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "manglende 'endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "tomt variabelnavn"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "overskydende tekst efter 'define'-direktiv"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "manglende 'endef', uafsluttet 'define'"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "overskydende tekst efter 'endef'-direktiv"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Overskydende tekst efter '%s'-direktiv"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "fremmed '%s'"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "kun én 'else' per betingelse"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Misdannet målspecifik variabeldefinition"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "der kan ikke defineres forudsætninger i kommandoer"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "blandede implicitte og statiske mønsterregler"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "blandede implicitte og normale regler"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "mål '%s' passer ikke til målmønstret"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "målfil '%s' har både :- og ::-angivelser"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "target '%s' optræder mere end én gang i samme regel."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "advarsel: tilsidesætter kommandoer for mål '%s'"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "advarsel: ignorerer gamle kommandoer for mål '%s'"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "blandede implicitte og normale regler"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "advarsel: NUL-tegn set; resten af linjen ignoreres"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Ingenting at gøre for '%s'."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' er tidssvarende."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Beskærer fil '%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sIngen regel til at skabe mål '%s' som behøves af '%s'%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sIngen regel til at skabe mål '%s'%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Overvejer målfil '%s'.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Opdatering af fil '%s' er forgæves prøvet for nylig.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Fil '%s' er allerede overvejet.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Opdaterer stadig fil '%s'.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Opdatering af fil '%s' afsluttet.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Filen '%s' findes ikke.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Advarsel: .LOW_RESOLUTION_TIME-fil '%s' har et tidsstempel med høj "
+"opløsning"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Fandt en implicit regel for '%s'.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Ingen implicit regel for '%s' fundet.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Bruger standardkommandoer for '%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Cirkulær %s <- %s afhængighed opgivet."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Afsluttet forudsætningerne for målfil '%s'.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Forudsætningerne for '%s' er ved at blive skabt.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Opgiver målfil '%s'.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Målet '%s' ikke genskabt på grund af fejl."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Forudsætningen '%s' angiver kun rækkefølgen ift. målet '%s'.\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Forudsætningen '%s' for målet '%s' findes ikke.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Forudsætningen '%s' er nyere end målet '%s'.\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Forudsætningen '%s' er ældre end målet '%s'.\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Målet '%s' er med dobbelt-kolon og har ingen forudsætninger.\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Ingen kommandoer til '%s', og ingen forudsætninger har ændret sig.\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Skaber '%s' pga. \"always-make\"-flag.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Ingen grund til at genskabe målet '%s'"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; bruger VPATH-navnet '%s'"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Skal genskabe målet '%s'.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr " Ignorerer VPATH-navnet '%s'.\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Kommandoerne for '%s' er ved at blive kørt.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Genskabelse af målfil '%s' mislykkedes.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "MÃ¥lfil '%s' genskabt.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Med -q trænger målfilen '%s' til at blive genskabt.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Bruger standardkommandoer for '%s'.\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Advarsel: Ændringstiden for filen '%s' er i fremtiden"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Advarsel: Filen '%s' har ændringstidspunkt %s s i fremtiden"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS-element '%s' er ikke et mønster"
+
+# "remote job exportation interface to the Customs daemon": jeg aner ikke
+# hvad der er tale om. I øvrigt ser remote-cstms.c forældet/ubrugt ud, og
+# koden er ikke understøttet af GNU...
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs kan ikke eksporteres: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Implicitte regler."
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Ingen implicitte regler."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u implicitte regler, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminale."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "FEJL: forkert num_pattern_rules!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "ukendt signal"
+
+# De fleste af signalnavnene fra signame.c er kopieret fra libc.da.po,
+# kun ganske enkelte findes ikke der.
+#: signame.c:92
+msgid "Hangup"
+msgstr "Læg på"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Afbrudt"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Afslut"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Ulovlig instruktion"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Sporings-/stoppunkts-fælde"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Afbrudt"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT_fælde"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Emulatorfælde"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Undtagelsestilfælde ved flydendetals-operation"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Dræbt"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Busfejl"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Lagersegmentfejl"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Ugyldigt systemkald"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Røret blev brudt"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarmen gik"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Termineret"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Brugerdefineret signal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Brugerdefineret signal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Barnet afsluttet"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Strømmen gik"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Stoppet"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Stoppet (ville læse fra tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Stoppet (ville skrive til tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Stoppet (signal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Begrænsning af CPU-tid overskredet"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Grænse for filstørrelse overskredet"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtuel tidsgrænse overskredet"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profileringstiden udløb"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Vinduet blev ændret"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Fortsættes"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Kritisk I/O-tilstand"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O mulig"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Resurse tabt"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Faresignal"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Informationsforespørgsel"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Flydendetalshjælpeprocessor ikke tilgængelig"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"%s strcache brugt: total = %d (%d) / maks = %d / min = %d / gnmsn = %d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+"%s strcache brugt: total = %d (%d) / maks = %d / min = %d / gnmsn = %d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr "%s strcache fri: total = %d (%d) / maks = %d / min = %d / gnmsn = %d\n"
+
+#: strcache.c:287
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s # strenge i strcache: %d / opslag = %lu / fundne = %lu\n"
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# Statistik for fil-hash-spande:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatisk"
+
+#: variable.c:1602
+msgid "default"
+msgstr "forvalgt"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "miljø"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefil"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "miljø med -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "kommandolinje"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "'override'-direktiv"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (fra '%s', linje %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# Statistik for variabelsæt-hash-spande:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variabler\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Mønsterspecifikke variabelværdier"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Ingen mønsterspecifikke variabelværdier."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u mønsterspecifikke variabelværdier"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "advarsel: udefineret vaiabel '%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() mislykkedes med %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Advarsel: Tom omdirigering\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "intern fejl: '%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-advarsel, du kan blive nødt til at genetablere CTRL-Y-behandling fra DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Ukendt indbygget kommando '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Fejl, tom kommando\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Omdirigeret inddata from %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Omdirigeret fejl to %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Tilføj uddata til slutningen af %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Omdirigeret uddata til %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Tilføj %.*s og ryd op\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Udfører i stedet %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Fejl ved spawn, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH-søgestier\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Ingen 'vpath'-søgestier."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u 'vpath'-søgestier.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Ingen generel ('VPATH'-variabel) søgesti."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Generel ('VPATH'-variabel) søgesti:\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Ugyldig værdi i 'update_status'-felt!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Fejl 0x%x (ignoreret)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Kører kommandoer fra %s:%lu for at opdatere målet '%s'.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Kører indbyggede kommandoer for at opdatere målet '%s'.\n"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "intern fejl: flere '--jobserver-fds'-tilvalg"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "virtuel hukommelse opbrugt"
+
+#~ msgid "write error"
+#~ msgstr "skrivefejl"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # strcache-buffere: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# statistik for strcache-hashtabeller:\n"
+#~ "# "
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Syntaksfejl, stadig inden i '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Fik et SIGCHLD; %u uhøstede børn.\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-advarsel, CTRL-Y vil efterlade underproces(ser).\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Angiv ikke -j eller --jobs hvis sh.exe ikke er tilgængelig."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Sætter make tilbage til enkelt job-tilstand."
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sDette er frit programmel; se kildeteksten for kopieringsbetingelser.\n"
+#~ "%sDer er INGEN garanti; end ikke for SALGBARHED eller EGNETHED TIL NOGET\n"
+#~ "%sBESTEMT FORMÃ…L.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "fremmed 'endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "tomt 'override'-direktiv"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "ugyldigt 'override'-direktiv"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "intet filnavn for '%sinclude'"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "mål '%s' efterlader forudsætningsmønstret tomt"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Ingen filer."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u filer i %u hash-spande .\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr "# %.3f filer per spand i gennemsnit, maks. %u filer i en spand.\n"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Stands proces for at tillade et fejlsøgningsprogram at hænge sig på"
+
+#~ msgid "# No variables."
+#~ msgstr "# Ingen variabler."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# %.1f variabler per spand i gennemsnit, maks. %u i en spand.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# %d.%d variabler per spand i gennemsnit, maks. %u i en spand.\n"
diff --git a/po/de.gmo b/po/de.gmo
new file mode 100644
index 0000000..d3250e2
--- /dev/null
+++ b/po/de.gmo
diff --git a/po/de.po b/po/de.po
new file mode 100644
index 0000000..1e3b1b3
--- /dev/null
+++ b/po/de.po
@@ -0,0 +1,2470 @@
+# German message translation file for GNU make
+# Copyright © 1996, 1997, 2002, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Philipp Thomas <pth@suse.de> 2013
+# Karl Eichwalder <ke@suse.de>, 2002, 2005.
+# Alexander Mader  <aumader@gmx.net>, 2000.
+# Alexander Mader  <mader@wias-berlin.de>, 1997.
+# Jochen Hein <jochen.hein@informatik.tu-clausthal.de>, 1996.
+#
+# Vereinheitlichen:
+# =================
+# command(s) -> Befehl(e)?  (nicht: Kommando(s))
+# target(s)  -> Ziel(e)     (nicht: Target(s))
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-11 12:22+0200\n"
+"Last-Translator: Philipp Thomas <pth@suse.de>\n"
+"Language-Team: German <translation-team-de@lists.sourceforge.net>\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "Versuch, eine nicht unterstützte Funktionalität zu verwenden: „%s“"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr ""
+"VMS bietet keine Möglichkeit einer Änderung \n"
+"der Zeitmarken von Archiveinträgen"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Archiv „%s“ existiert nicht"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: „%s“ ist kein gültiges Archiv"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Eintrag „%s“ existiert nicht in „%s“"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+"touch: Ungültiger Rückgabewert beim Zugriff \n"
+"von ar_member_touch auf „%s“"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "„lbr$set_module()“ konnte keine Modulinformation auslesen; Status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "„lbr$ini_control()“ scheiterte mit Status = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+"Konnte die Bibliothek „%s“ nicht öffnen um nach Eintrag\n"
+"„%s“ zu suchen"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr ""
+"Eintrag „%s“ %s: \n"
+"%ld Bytes an Position %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (der Name ist möglicherweise abgeschnitten)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Datum %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  Nutzer-ID = %d, Gruppen-ID = %d, Modus = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Die Regel hat zu viele Zeilen (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Abbruch.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Archiveintrag „%s“ ist möglicherweise falsch; nicht gelöscht"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Archiveintrag „%s“ ist möglicherweise falsch; nicht gelöscht"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Datei „%s“ wird gelöscht"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Datei „%s“ wird gelöscht"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  Auszuführende Regel"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (eingebaut):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (aus „%s“, Zeile %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Verzeichnisse\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: Status konnte nicht festgestellt werden.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr ""
+"# %s ( Schlüssel (key) %s,  letzte Änderung (mtime) %d): \n"
+"Konnte nicht geöffnet werden.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+"# %s (Gerät %d, Inode [%d,%d,%d]): \n"
+"Konnte nicht geöffnet werden.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr ""
+"# %s (Gerät %ld, Inode %ld): \n"
+"Konnte nicht geöffnet werden.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (Schlüssel (key) %s,  letzte Änderung (mtime) %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (Gerät %d, Inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (Gerät %ld, Inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Keine"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " Dateien, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "keine"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " Unmöglichkeiten"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " bisher."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " Unmöglichkeiten in %lu Verzeichnissen.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekursive Variable „%s“ referenziert sich (schließlich) selbst"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "Nicht abgeschlossene Variablenreferenz"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Die Regel für die Datei „%s“ wurde in %s angegeben:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Die Regel für die Datei „%s“ wurden aufgrund \n"
+"der Suche nach impliziten Regeln gefunden,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+"aber „%s“ wird jetzt als dieselbe Datei \n"
+"wie „%s“ betrachtet."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Die Regel für „%s“ wird ignoriert, \n"
+"die für „%s“ wird bevorzugt."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"„%s“ mit einfachem Doppelpunkt kann nicht in \n"
+"„%s“ mit doppeltem Doppelpunkt geändert werden"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"„%s“ mit doppeltem Doppelpunkt kann nicht in \n"
+"„%s“ mit einfachem Doppelpunkt geändert werden"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Löschen der übergangsweise angelegten Datei „%s“"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Die übergangsweise angelegte Datei „%s“ wird gelöscht...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Aktuelle Zeit"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Zeitstempel außerhalb des Gültigkeitsbereichs; %s wird ersetzt"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Dies ist kein Ziel:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Wertvolle Datei (benötigt von .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Vorgetäuschtes Ziel (benötigt von .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Kommandozeilen-Ziel (target)."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Eine standardmässige, MAKEFILES oder -include/sinclude Makedatei."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "# Eingebaute Regel"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Die Suche nach impliziten Regeln wurde durchgeführt."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Die Suche nach impliziten Regeln wurde nicht durchgeführt."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Wurzel impliziter/statischer Muster: „%s“\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Datei ist ein Zwischenschritt in den Abhängigkeiten."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Erzeugt außerdem:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Zeit der letzten Änderung wurde nicht überprüft."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Die Datei existiert nicht."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Datei ist sehr alt."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Zuletzt geändert %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Datei wurde aktualisiert."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Datei wurde nicht aktualisiert."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Derzeit laufende Regel (DAS IST EIN FEHLER)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Derzeit läuft die Regel für Abhängigkeiten (DAS IST EIN FEHLER)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Erfolgreich aktualisiert."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Eine Aktualisierung ist notwendig (-q ist angegeben)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Aktualisierung ist fehlgeschlagen."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Ungültiger Wert im „command_state“-Strukturelement!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Dateien"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# Statistik der Hash-Tabelle für Dateien:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Feld „%s“ wird nicht zwischengespeichert: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "Nicht-numerisches erstes Argument für die „word“-Funktion"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "Das erste Argument für  die „word“-Funktion muss größer als 0 sein"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "Nicht-numerisches erstes Argument für die „wordlist“-Funktion"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "Nicht-numerisches zweites Argument zur „wordlist“-Funktion"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "„windows32_openpipe“: „DuplicateHandle(In)“ schlug fehl (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "„cwindows32_openpipe“: „DuplicateHandle(Err)“ schlug fehl (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "„CreatePipe()“ schlug fehl (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() schlug fehl\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Die temporäre Stapelverarbeitungsdatei %s wird gelöscht\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "Öffnen: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "Schreiben: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Unzulässige Dateioperation: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "Zuwenig Argumente (%d) für die Funktion „%s“"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "Auf dieser Rechnerkonfiguration nicht implementiert: Funktion „%s“"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "Nicht beendeter Aufruf der Funktion „%s“: „%c“ fehlt"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Leere Funktionsname\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Unzulässiger Funktionsname: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Funktionsname is zu lang: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Ungültige minimale Anzahl von Argumenten (%d) für die Funktion „%s“\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Ungülte maximale Anzahl an Argumenten (%d) für die Funktion „%s“\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: Option „%s“ ist mehrdeutig\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: Option „--%s“ erlaubt kein Argument\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: Option „%c%s“ erlaubt kein Argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: Option „%s“ erfordert ein Argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: unbekannte Option „--%s“\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: unbekannte Option „%c%s“\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: unzulässige Option -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: ungültige Option -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: Option erfordert ein Argument -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: Option „-W %s“ ist mehrdeutig\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: Option „-W %s“ erlaubt kein Argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Verarbeite „%s“\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: begutachte „%s“\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"es können keine %lu Bytes für die Hashtabelle reserviert werden: "
+"Hauptspeicher erschöpft"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Auslastung=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Kollisionen=%ld/%ld%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Es wird nach einer impliziten Regel für „%s“ gesucht.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+"Es wird nach einer impliziten Regel für Archiveinträge für „%s“ gesucht.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Rekursion in den impliziten Regeln wird vermieden.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Wurzel zu lang: „%.*s“.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Muster-Regel mit Wurzel „%.*s“ wird probiert.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Unmögliche Voraussetzung „%s“ für eine Regel wird abgelehnt.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Unmögliche implizite Voraussetzung „%s“ wird abgelehnt.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Regel-Voraussetzung „%s“ wird auprobiert.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Implizite Voraussetzung „%s“ wird ausprobiert.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Die Voraussetzung „%s“ wurde als VPATH „%s“ gefunden\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr ""
+"Es wird nach einer Regel mit der übergangsweise verwendeten Datei „%s“ "
+"gesucht.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Eine temporäre Datei kann nicht erzeugt werden\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (Speicherauszug erstellt)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignoriert)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<eingebaut>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: die Regel für Ziel „%s“ scheiterte"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Fehler %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Fehler 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Es wird auf noch nicht beendete Prozesse gewartet..."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Aktiver Kindprozess %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (entfernt)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Sammle erfolglosen Kindprozess %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Sammle erfolgreichen Kindprozess %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Lösche temporäre Stapelverarbeitungsdatei „%s“\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Löschen der temporären Stapelverarbeitungsdatei „%s“ scheiterte (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Entferne Kindprozess %p PID %s%s aus der Kette.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "Freigabe der Jobserver-Semaphore: (Fehler %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Token des Kindprozesses %p PID (%s) freigegeben.\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "Job-Server wird geschrieben"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "„process_easy()“ konnte den Prozess nicht starten (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"%d Argumente gehörten zum fehlgeschlagenen Prozessstart\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Nehme Kindprozess %p (%s) PID %s%s in die Kette auf.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "warten auf Semaphore oder Kindprozess: (Fehler %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Token für den Kindprozess %p (%s) erhalten.\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "Lese Pipe für die Jobs"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: Archiv „%s“ existiert nicht"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: Ziel „%s“ wird aktualisiert wegen: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+"Auf diesem Betriebssystem kann die Einhaltung\n"
+"der Lastbeschränkung nicht erzwungen werden"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "Lasteinschränkung kann nicht erzwungen werden: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"Keine weiteren Dateireferenzen verfügbar: die Standardeingabe konnte\n"
+"nicht dupliziert werden\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"Keine weiteren Dateireferenzen verfügbar: die Standardausgabe konnte\n"
+"nicht dupliziert werden\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"Keine weiteren Dateireferenzen verfügbar: Standardfehler konnte\n"
+"nicht dupliziert werden\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Die Standardeingabe konnte nicht wieder hergestellt werden\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Die Standardausgabe konnte nicht wieder hergestellt werden\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Standardfehler konnte nicht wieder hergestellt werden\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"„make“ registrierte die Beendigung des Kindprozesses mit ID %s,\n"
+"wartet jedoch noch auf den Prozess mit ID %s.\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Kommando nicht gefunden"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Shell-Programm wurde nicht gefunden"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: der Platz in der Programmumgebung könnte erschöpft sein"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL gewechselt (war „%s“, ist jetzt „%s“)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Temporäre Stapelverarbeitungsdatei %s wird erstellt\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Inhalt der Stapelverarbeitungsdatei:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Inhalt der Stapelverarbeitungsdatei:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (Zeile %d) Falscher Shell-Kontext (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"-O[TYPE] (--output-sync[=TYPE]) ist für diese Bau-Aufgabe nicht konfiguriert."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Die globale Symboltabelle konnte nicht geöffnet werden: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Ds geladede Objekt %s wurde nicht als GPL-kompatibel deklariert"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Symbol %s konnte nicht aus %s geladen werden: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Zu ladedender Symbolname ist leer: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Symbol %s wird aus %s geladen\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Die Operation „load“ wird auf dieser Plattform nicht unterstützt."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Optionen:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+"  -b, -m                      Wird aus Kompatibilitätsgründen ignoriert\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Alle Ziele ohne Bedingungen erstellen\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C VERZEICHNIS, --directory=VERZEICHNIS\n"
+"                              In VERZEICHNIS wechseln, bevor etwas getan "
+"wird\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Viele Informationen zur Fehlersuche ausgeben.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=KENNUNGEN]         Verschiedene Arten von Debug-Information "
+"ausgeben\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Umgebungsvariablen überschreiben „make“-"
+"Steuerdateien\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=ZEIENKETTE           ZEICHENKETTE wie einen Makedatei-Eintrag "
+"auswerten.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f DATEI, --file=DATEI, --makefile=DATEI\n"
+"                              DATEI als Makefile lesen\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Diese Meldung ausgeben und beenden\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Fehler in Regeln werden irgnoriert\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I VERZEICHNIS, --include-dir=VERZEICHNIS\n"
+"                              VERZEICHNIS nach eingebundenen\n"
+"                              Makedateien durchsuchen\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          N Jobs gleichzeitig erlauben; unbegrenzte "
+"Anzahl \n"
+"                              von Jobs ohne Argument\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Weiterlaufen, auch wenn einige Targets nicht\n"
+"                              erzeugt werden konnten\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Keine Jobs starten bevor die Auslastung nicht "
+"unter N ist.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Den neueste Modifizierungszeit zwischen\n"
+"                              symbolischer Verküpfung und dem Ziel "
+"verwenden.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Keine Regel ausführen, nur ausgeben.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o DATEI, --old-file=DATEI, --assume-old=DATEI\n"
+"                              DATEI als sehr alt ansehen und nicht neu "
+"erzeugen.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYP], --output-sync[=TYP]\n"
+"                              Synchronisiert die Ausgabe paralleler Jobs per "
+"TYP.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       Die interne Datenbank von „make“ ausgeben\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Keine Regel ausführen; der Exit-Status gibt "
+"an, ob die Dateien\n"
+"                              aktuell sind\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Die eingebauten impliziten Regeln "
+"deaktivieren.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Die eingebauten Variablenbelegungen "
+"deaktivieren.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Regeln nicht ausgeben.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              -k abschalten.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Die Ziele werden nur als aktualisiert "
+"markiert,\n"
+"                              nicht tatsächlich erneuert\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+"  --trace                     Viele Informationen zur Fehlersuche ausgeben\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Die Versionsnummer von „make“ ausgeben und "
+"Programm beenden\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Das aktuelle Verzeichnis ausgeben\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        -w abschalten, selbst wenn es implizit "
+"eingeschaltet wurde.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W DATEI, --what-if=DATEI, --new-file=DATEI, --assume-new=DATEI\n"
+"                              DATEI als unendlich neu erachten.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Eine Warnung ausgeben, wenn eine undefinierte\n"
+"                                     Variable referenziert wird.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "Eine leere Zeichenkette ist als Dateiname ungültig"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "Unbekannte Debug-Level angegeben „%s“"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "unbekannter Typ von Ausgabesynchronisierung „%s“"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+"%s: bekam Unterbrechung/Ausnahme signalisiert (Kode = 0x%lx, Adr = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Das Programm %s rief einen Ausnahmefilter auf, \n"
+"der nicht bearbeitet wurde\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Zugriffsverletzung: Schreiboperation an Adresse 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Zugriffsverletzung: Leseoperation an Adresse 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell setzt default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell Suche im Pfad setzte default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s setzt für 30 Sekunden aus..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "„sleep(30)“ ist abgeschlossen. Es geht weiter.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"interner Fehler: die Semaphore „%s“ des Jobservers kann nicht geöffnet "
+"werden:\n"
+"                 (Fehler %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Jobserver-Klient (Semaphore %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "Interner Fehler: Falsche --jobserver-fds Angabe „%s“"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Jobserver-Klient (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"Warnung: -jN in „make“-Verarbeitungszweig erzwungen: \n"
+"Jobserver-Modus nicht verfügbar."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "Jobserver verdoppelt"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"Warnung: Kein Jobserver verfügbar: -j1 wird gesetzt. Fügen Sie der "
+"Ursprungsregel\n"
+"„+“ hinzu."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Das Makefile wurde zweimal über die Standardeingabe angegeben."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (temporäre Datei)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (temporäre Datei)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+"Parallele Abarbeitung (-j) \n"
+"wird auf dieser Plattform nicht unterstützt."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Umstellung auf Einzel-Job-Verarbeitung (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Zeitschlitze der Jobservers auf %d begranzt\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "Jobserver-Semaphore wird erzeugt: (Fehler %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "Öffnen der Pipe für die Jobs"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "Initialisierung der Pipe für den Jobserver"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+"Symbolische Verknfungen werdfen nicht unterstützt: -L wird abgeschaltet."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Aktualisiere „make“-Steuerdateien...\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+"„make“-Steuerdatei „%s“ könnte eine Schleife enthalten; \n"
+"es wird nicht neu erzeugt.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Konnte die „make“-Steuerdatei „%s“ nicht neu erstellen."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Die eingebundene „make“-Steuerdatei „%s“ wurde nicht gefunden."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Die „make“-Steuerdatei „%s“ wurde nicht gefunden"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Konnte nicht in das ursprüngliche Verzeichnis wechseln."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Erneute Ausführung[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (temporäre Datei): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL beinhaltet mehr als ein Ziel"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Es wurden keine Ziele angegeben und keine „make“-Steuerdatei gefunden"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Keine Ziele"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Aktualisieren der Ziele...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"Warnung: Mit der Uhr stimmt etwas nicht. \n"
+"         Der Bauauftrag könnte unvollständig sein."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Aufruf: %s [Optionen] [Ziele] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Diese Programm wurde für %s gebaut\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Diese Programm wurde für %s (%s) gebaut\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Fehlermeldungen (auf Englisch) an <bug-make@gnu.org> senden.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "Die Option „%s%s“ verlangt eine nicht-leere Zeichenkette als Argument"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "Die Option „-%c“ verlangt eine positive ganze Zahl als Argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sGebaut für %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sGebaut für %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLizenz GPLv3+: GNU GPL Version 3 oder später <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sDies ist freie Software: Sie können sie nach Belieben ändern und weiter "
+"verteilen.\n"
+"%sSoweit es die Gesetze erlauben gibt es KEINE GARANTIE.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# „Make“-Datenbank; erstellt am: %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# „Make“-Datenbank beendet am: %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Unbekannter Fehler %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: Nutzer %lu (tatsächlich %lu), Gruppe %lu (tatsächlich %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Initialisierter Zugriff"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Zugriff durch Benutzer"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Zugriff durch „make“"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Kindprozess"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: ein unbekanntes Verzeichnis wird betreten\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: ein unbekanntes Verzeichnis wird verlassen\n"
+
+# !!! Attention: concatenated with the previous messages!!!
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Verzeichnis „%s“ wird betreten\n"
+
+# !!! Attention: concatenated with the previous messages!!!
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Verzeichnis „%s“ wird verlassen\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Ein unbekanntes Verzeichnis wird betreten\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Ein unbekanntes Verzeichnis wird verlassen\n"
+
+# !!! Attention: concatenated with the previous messages!!!
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Verzeichnis „%s“ wird betreten\n"
+
+# !!! Attention: concatenated with the previous messages!!!
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Verzeichnis „%s“ wird verlassen\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "Schreibfehler: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Schluss.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "„make“-Steuerdateien werden gelesen...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "„make“-Steuerdatei „%s“ wird gelesen"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (kein Standard-Ziel)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (Suchpfad)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (macht nichts)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (keine ~-Auflösung)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "UTF-8 BOM in makefile „%s“ wird übersprungen\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "UTF-8 BOM im makefile-Puffer wird übersprungen\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "Ungültige Syntax in der Bedingung"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: konnte nicht geladen werden"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "Rezept beginnt vor dem ersten Ziel"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "Es fehlt eine Regel vor der Regel"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (Meinten Sie TAB anstelle von 8 Leerzeichen?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "Fehlende Trennung%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "Es fehlt ein Ziel-Muster"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "Mehrfache Ziel-Muster"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "Ziel-Muster enthält kein „%%“"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "Fehlendes „endif“"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "Leerer Variablenname"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "Überflüssiger Text nach einer „define“-Anweisung"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "Fehlendes „endef“, nicht abgeschlossenes „define“"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "Überflüssiger Text nach einer „endef“-Anweisung"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Überflüssiger Text nach einer „%s“-Anweisung"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "Überflüssiges „%s“"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "Es ist nur ein „else“ pro Bedingung erlaubt"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Falsche Ziel-bezogene Variablendefinition"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "Voraussetzungen können nicht in Regeln definiert werden"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "Implizite und statische Muster-Regeln wurden vermischt"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "Implizite und normale Regeln wurden vermischt"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "Target „%s“ passt nicht zum Ziel-Muster"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "Das Ziel „%s“ enthält sowohl „:“- als auch „::“-Einträge"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "Das Ziel „%s“ steht mehrfach in derselben Regel."
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "Warnung: Die Befehle für das Ziel „%s“ werden überschrieben"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "Warnung: Alte Befehle für das Ziel „%s“ werden ignoriert"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "Implizite und normale Regeln wurden vermischt"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "Warnung: NULL-Zeichen gelesen; der Rest der Zeile wird ignoriert"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Für das Ziel „%s“ ist nichts zu tun."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "„%s“ ist bereits aktuell."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Die Datei „%s“ wird \"gestutzt\" (der Abhängigkeitsgraph).\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%sKeine Regel vorhanden, um das Ziel „%s“, \n"
+"  benötigt von „%s“, zu erstellen%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sKeine Regel, um „%s“ zu erstellen%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Betrachte Ziel-Datei „%s“.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+"Es wurde kürzlich versucht, die Datei „%s“ zu aktualisieren,\n"
+"dies schlug aber fehl.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Die Datei „%s“ wurde bereits betrachtet.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Die Datei „%s“ wird immer noch aktualisiert.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Aktualisierung der Datei „%s“ beendet.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Die Datei „%s“ existiert nicht.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Warnung: mit .LOW_RESOLUTION_TIME gekennzeichnete Datei „%s“ hat einen\n"
+"             hochaufgelösten Zeitstempel"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Eine implizite Regel für „%s“ wurde gefunden.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Keine implizite Regel für „%s“ gefunden.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Die Standard-Regel für „%s“ wird verwendet.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Zirkuläre Abhängigkeit %s <- %s wird nicht verwendet."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Fertig mit den Voraussetzungen für die Ziel-Datei „%s“.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Die Voraussetzungen von „%s“ werden fertiggestellt.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Die Arbeit an der Target-Datei „%s“ wurde aufgegeben.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Das Ziel „%s“ wurde wegen Fehlern nicht aktualisiert."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Die Datei „%s“ ist älter als das davon abhängige Ziel „%s“.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr ""
+"Die Datei „%s“, Voraussetzung für das Ziel „%s“, \n"
+"existiert nicht.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Die Datei „%s“ ist jünger als das davon abhängige Ziel „%s“.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Die Datei „%s“ ist älter als das davon abhängige Ziel „%s“.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+"Das Ziel „%s“ hat einen doppelten Doppelpunkt \n"
+"und keine Voraussetzungen.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+"Kein Kommando für „%s“ und keine Voraussetzung \n"
+"wurde tatsächlich verändert.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "„%s“ wird aufgrund der Keinnzeichnung als always-make erzeugt.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Es ist nicht notwendig, das Ziel „%s“ neu zu erzeugen"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; benutze VPATH-Name „%s“"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Das Target „%s“ muss neu erzeugt werden.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Der VPATH-Name „%s“ wird ignoriert.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Die Regel für „%s“ wird gerade ausgeführt.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Fehler beim Aktualisieren der Ziel-Datei „%s“.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Die Zieldatei „%s“ wurde erfolgreich aktualisiert.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Zieldatei „%s“ muss bei -q aktualisiert werden.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Die Standard-Kommandos für „%s“ werden verwendet.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Warnung: Datei „%s“ hat zukünftige Änderungszeit"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Warnung: Datei „%s“ hat hat in der Zukunft liegende Änderungszeit %s"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS Element „%s“ ist kein Muster"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs wird nicht exportieren: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Implizite Regeln"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Keine impliziten Regeln vorhanden."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u implizite Regeln, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " Terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: „num_pattern_rules“ falsch!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "Unbekanntes Signal"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Aufgelegt"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Abgebrochen (Interrupt)"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Quit"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Illegaler Befehl"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Verfolgen/anhalten abfangen (Trace/breakpoint trap)"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Abgebrochen (Aborted)"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT abfangen (IOT trap)"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT abfangen (EMT trap)"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Gleitkommafehler"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Abgebrochen (Killed)"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Bus-Fehler"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Adressierungsdefekt"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Falscher Systemaufruf"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Zerstörte Pipe"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Wecksignal"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Abgebrochen (Terminated)"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Nutzersignal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Nutzersignal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Kindprozess beendet"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Stromausfall"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Angehalten"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Angehalten (tty input)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Angehalten (tty output)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Angehalten (signal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU-Zeitschranke überschritten"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Dateigrößenschranke überschritten"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtueller Timer erloschen"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profiling Timer erloschen"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Fenster hat sich verändert"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Fortgesetzt"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Dringende I/O-Bedingung"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O möglich"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Ressource verloren gegangen"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Gefahrensignal"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Informationsanforderung"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Es ist kein Koprozessor für Fließkommaoperationen vorhanden"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Keine Puffer für strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s Puffer für strcache: %lu (%lu) / Zeichenketten = %lu / Speicher = %lu B / "
+"ø = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s aktueller Puffer: Größe = %hu B / benutzt = %hu B / Anzahl = %hu / ø = "
+"%hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s andere verwendete: Summe = %lu B / Anzahl = %lu / /ø = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s andere freie: Summe = %lu B / Max = %lu B / Min = %lu B / ø = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s Leistung von strcache: Suchen = %lu / Trefferrate = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# Statistik für Hashtabelle:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatisch"
+
+#: variable.c:1602
+msgid "default"
+msgstr "Standard"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "Umgebung"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "Makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "Umgebung per -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "Kommandozeile"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "„override“-Anweisung"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (aus „%s“, Zeile %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr ""
+"# Hashtabellen-Statistik für Variablen:\n"
+"\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variablen\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Musterspezifische Variablenwerte"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Keine musterspezifischen Variablenwerte."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u musterspezifische Variablenwerte"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "Warnung: undefinierte Variable „%.*s“"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "„sys$search“ schlug mit %d fehl\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Warnung: Umleitung ins Leere!\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "Interner Fehler: „%s“ command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-Warnung: Vielleicht müssen Sie STRG-Y aus DCL wieder ermöglichen.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Unbekanntes eingebautes Kommando „%s“\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Fehler: Leere Anweisung\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Datei %s auf Standardeingabe umgeleitet\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Fehlerausgabe nach %s umgeleitet\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Ausgabe nach %s umgeleitet\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Ausgabe nach %s umgeleitet\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "%.*s anhängen und aufräumen\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "%s wird stattdessen ausgeführt\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Fehler %d beim Starten eines Kindprozesses\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH-Suchpfade\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Keine „vpath“-Suchpfade."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u „vpath“-Suchpfade.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Kein allgemeiner Suchpfad (Variable „VPATH“)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Allgemeiner Suchpfad (Variable „VPATH“):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "Interner Fehler: mehrfache --sync-mutex Optionen"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "Interner Fehler: mehrfache --jobserver-fds Optionen"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "Der virtuelle Speicher ist verbraucht"
+
+#~ msgid "write error"
+#~ msgstr "Schreibfehler"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Ungültiger Wert in „update_status“-Eintrag!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Fehler 0x%x (ignoriert)"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr ""
+#~ "Wenn „sh.exe“ nicht vorhanden ist, \n"
+#~ "sollten Sie nicht „-j“ oder „--jobs“ angeben."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "„make“ wird so umgestellt, dass nur ein Job laufen kann."
+
+#, fuzzy
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ ", von Richard Stallman und Roland McGrath.\n"
+#~ "%sErstellt für %s\n"
+#~ "%sCopyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000\n"
+#~ "%s\tFree Software Foundation, Inc.\n"
+#~ "%sDies ist Freie Software; siehe die Programmquellen für "
+#~ "Vervielfältigungsbedingungen.\n"
+#~ "%sEs gibt KEINE Gewährleistung; nicht einmal für VERMARKTUNG oder "
+#~ "NUTZBARKEIT FÃœR EINEN\n"
+#~ "%sBESONDEREN ZWECK.\n"
+#~ "\n"
+#~ "%sFehlermeldungen (auf Englisch) an <bug-make@gnu.org>.\n"
+#~ "\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "Überflüssiges „endef“"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "Leere „override“-Anweisung"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "Ungültige „override“-Anweisung"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-Warnung: STRG-Y wird Unterprozesse übriglassen!\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u Dateien zu %u hash-Werten.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr ""
+#~ "# durchschnittlich %.3f Dateien je hash-Wert,\n"
+#~ "max. %u Dateien zu einem hash-Wert.\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Syntaxfehler, immer noch in '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Erhielt Signal „SIGCHLD“; %u unbeendete Kindprozesse.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "VERZEICHNIS"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "In das VERZEICHNIS wechseln, bevor etwas anderes ausgeführt wird"
+
+#~ msgid "FLAGS"
+#~ msgstr "FLAGS"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Prozess aussetzeb, um das Einklinken eines Debuggers zu ermöglichen"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "Umgebungsvariablen überschreiben „make“-Steuerdateien"
+
+#~ msgid "FILE"
+#~ msgstr "DATEI"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "DATEI als „make“-Steuerdatei lesen"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "Das VERZEICHNIS nach eingebundenen „make“-Steuerdateien durchsuchen"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "Nur bei Belastung unterhalb N mehrere Prozesse starten"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "Befehle nur anzeigen, nicht ausführen"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "DATEI als sehr alt betrachten und sie nicht neu erzeugen"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "Die Kommandos nicht ausgeben"
+
+#~ msgid "Turns off -k"
+#~ msgstr "-k abschalten"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "Die DATEI stets als neu betrachten"
+
+# !!! Attention: concatenated with the following messages!!!
+#~ msgid "Entering"
+#~ msgstr "Wechsel in das Verzeichnis"
+
+# !!! Attention: concatenated with the following messages!!!
+#~ msgid "Leaving"
+#~ msgstr "Verlassen des Verzeichnisses"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "Kein Dateiname für „%sinclude“"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "Target „%s“ lässt Voraussetzungs-Muster leer"
+
+#~ msgid "# No variables."
+#~ msgstr "# Keine Variablen vorhanden."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# Durchschnittlich %.1f Variablen pro Wert, max %u je Wert.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# Durchschnittlich %d.%d Variablen pro Wert, max %u je Wert.\n"
+
+#~ msgid "the `word' function takes a positive index argument"
+#~ msgstr "Die „word“-Funktion erwartet als Argument einen positiven Index"
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/po/en@boldquot.header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/po/en@quot.header b/po/en@quot.header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/po/en@quot.header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/po/es.gmo b/po/es.gmo
new file mode 100644
index 0000000..b671030
--- /dev/null
+++ b/po/es.gmo
diff --git a/po/es.po b/po/es.po
new file mode 100644
index 0000000..904e1d3
--- /dev/null
+++ b/po/es.po
@@ -0,0 +1,2787 @@
+# Mensajes en español para GNU make.
+# Copyright (C) 1996, 2001, 2011, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Max de Mendizábal <max.de.mendizabal@gmail.com>, 1996, 2011.
+# Antonio Ceballos <aceballos@gmail.com>, 2013
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-12-08 23:28+0200\n"
+"Last-Translator: Antonio Ceballos <aceballos@gmail.com>\n"
+"Language-Team: Spanish <es@li.org>\n"
+"Language: es\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "Se intentó utilizar una característica no implementada: '%s'"
+
+# Sugerencia: touch -> `touch'. sv
+# Ok, aceptada. A falta de cursivas... mm
+# No veo porqué no se ha de usar 'tocar' en vez de touch em+
+# El mensaje además hace referencia a un touch de un objeto dentro
+# de una librería, y de eso no se dice nada en el mensaje. Creo que
+# hay que tener cuidado con estas cosas.
+# El programa para tocar un miembro de un archivo ... , y ahi estamos
+# ya en problemas con el dichoso archivo/fichero.
+# A ver que se os ocurre em+
+# Enrique: touch es un programa del sistema operativo y sirve para
+# cambiar la fecha de un programa o archivo. Es decir lo "toca" y
+# modifica sus atributos. Por eso preferí no traducirlo.
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "El programa para hacer un 'touch' no está disponible en VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: El archivo '%s' no existe"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s' no es un archivo válido"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: El miembro '%s' no existe en '%s'"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Código de retorno erróneo de ar_member_touch en '%s'"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"fallo en lbr$set_module() para extraer la información del módulo, estado = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "fallo en lbr$ini_control() con estado = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "Error al abrir la biblioteca '%s' para buscar al elemento '%s'"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Miembro '%s'%s: %ld bytes en %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (el nombre puede estar truncado)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Fecha %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modo = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Las instrucciones tienen demasiadas líneas (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Interrumpir.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** [%s] El miembro de archivo '%s' podría estar incorrecto; aunque no se "
+"elimina"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** El miembro del archivo '%s' podría estar incorrecto; aunque no se elimina"
+
+# Propongo un cambio en el tiempo verbal: Se borra el archivo temporal. sv
+# Ok. mm
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Se borra el archivo '%s'"
+
+# Propongo un cambio en el tiempo verbal: Se borra el archivo temporal. sv
+# Ok. mm
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Se borra el archivo '%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  las instrucciones para ejecutar"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (integrado):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (de '%s', linea %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Directorios\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: podría no estar establecido.\n"
+
+# ¿No sobraría el "posiblemente"?
+# Propongo dejarlo en " no se pudo abrir ". sv
+# Ok. Es consistente con otras traducciones. mm
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (llave %s, mtime %d): no se pudo abrir.\n"
+
+# En el K & R aparece inode traducido como nodo-i. ¿qué te parece? sv
+# Bien. Me gusta con el guioncito. mm
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+"# %s (dispositivo %d, nodo-i [%d,%d,%d]): posiblemente no se pueda abrir.\n"
+
+# ¿No sobraría el "posiblemente"?
+# Propongo dejarlo en " no se pudo abrir ". sv
+# Ok. Es consistente con otras traducciones. mm
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (dispositivo %ld, nodo-i %ld): no se pudo abrir.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (llave %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (dispositivo %d, nodo-i [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (dispositivo %ld, nodo-i %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "No"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " archivos, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "no"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " imposibilidades"
+
+# ¿"So far" no era "hasta ahora"? (no me hagas mucho caso) sv
+# Si tu traducción es mejor. Aceptada. mm
+#: dir.c:1068
+msgid " so far."
+msgstr " hasta ahora."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " imposibilidades en %lu directorios.\n"
+
+# Creo que eventually sería "finalmente" o algo así. sv
+# Si, es finalmente no a veces. Ok. mm
+# referencia me parece que no lleva tilde. sv
+# No, no lleva acento. Me emocioné con elos. mm
+# Creeis de veras que tiene sentido 'finalmente'em+
+# yo pondría ser termina autoreferenciando, por
+# ejemplo em+
+# Mejor lo eliminamos. Es de alguna forma reiterativo e innecesario.
+# Lo de `al final' puede ser más confuso. mm
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "La variable recursiva '%s' se auto-referencia"
+
+# No me gusta nada ( lo siento )
+# ¿ Qué tal : La referencia a una variable está sin terminar em+
+# Creo que tienes razón la voz pasiva es muy desagradable. mm.
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "la referencia a la variable está sin terminar"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Se especificaron instrucciones para el archivo '%s' en %s:%lu,"
+
+# Buscando en las legras implícitas em+
+# Utilicé por búsqueda en para evitar el gerundio. mm
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Las instrucciones para el archivo '%s' se encontraron por búsqueda en reglas "
+"implícitas,"
+
+# "now" es "ahora". ¿te lo has comido consciente o inconscientemente? sv
+# inconscientemente. mm
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "pero '%s' se considera ahora como el mismo archivo que `%s'."
+
+# Lo repetiré una y mil veces... :-)
+# "To ignore" *no* es ignorar. sv
+# Propongo "no serán tenidas en cuenta" a falta de algo mejor.
+# Ok. Mi necedad sobrepasa el milenio. mm
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Las instrucciones para '%s' no serán tenidas en cuenta en favor de las que "
+"están en '%s'."
+
+# Me suena que eso de colon es algo así como punto, dos puntos o punto y coma.
+# ¿Podrías comprobarlo? sv
+# Es un punto sencillo (.). A ver si te gusta mi propuesta. mm
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "no se puede cambiar un punto (.) '%s' por dos puntos (:) '%s'"
+
+# Lo mismo. sv
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "no se pueden cambiar dos puntos (:) '%s' por un punto (.) '%s'"
+
+# Propongo un cambio en el tiempo verbal: Se borra el archivo temporal. sv
+# Ok. mm
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Se borra el archivo intermedio '%s'"
+
+# Propongo un cambio en el tiempo verbal: Se borra el archivo temporal. sv
+# Ok. mm
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "*** Se borran los archivos intermedios...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Hora actual"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Fecha fuera de intervalo; sustituyéndola %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# No es un objetivo:"
+
+# Pondría: es una dependencia de em+
+# Si, tienes razón. mm
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Archivo valioso (es una dependencia de .PRECIOUS)."
+
+# Lo mismo. Y traducir por falso es poco menos que poco exacto.
+# Los phony target de make son aquellos que se ejecutan siempre
+# sin tener en cuenta si existe un archivo con el nombre del objetivo
+# y de si es actual. Propondría incondicional en vez de falso, ya que
+# explica exactamente qué es un phony target em+
+# No. Incondicional no es una traducción correcta. Que tal si al rato
+# se les ocurre hacer una nueva instrucción .INCONDITIONAL.
+# Si quieres podríamos pensar en otra traducción como señuelo o algo así. mm
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  objetivo falso (dependencia de .PHONY)."
+
+# FUZZY
+# Pondria línea de comandos
+# Y creo que no sé exactamente a que se refiere, No creo que haya visto
+# este mensaje nunca en make lo marco con FUZZY em+
+# Están traduciendo commands como comandos? Son más bien ordenes o
+# instrucciones. Por mi parte no hay problema, incluso me gusta más
+# comandos, pero es un anglicismo. mm
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Objetivo en línea de instrucciones."
+
+# Habría que entender esto
+# Creo que esto es lo que significa. El fuente no es demasiado claro. mm
+# Se refiere a que el fichero makefile es uno que encuentra por
+# defecto ( en este orden GNUmakefile, Makefile y makefile ) o uno
+# que está definido en la variable de entorno MAKEFILE em+
+# Así pues tu traducción es completamente equivocada, lo siento.
+# Pondría: Fichero por defecto o definido en la variable MAKEFILE em+
+# Cierto, lo has entendido bien. Arreglo acorde. mm
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Por omisión, MAKEFILES, o -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Regla incorporada"
+
+# Propongo efectuada en lugar de terminada. sv
+# Ok. Es más literal. mm
+# Atención ! , es la búsqueda 'de'reglas implícitas em+
+# Ok. Ojo, debo pluralizar regla e implícita. Platicarlo con Ulrich. mm
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  La búsqueda de reglas implícitas ha sido efectuada."
+
+# Propongo efectuada en lugar de terminada. sv
+# Ok. Es más literal. mm
+# Atención ! , es la búsqueda 'de'reglas implícitas em+
+# Ok. Ojo, debo pluralizar regla e implícita. Platicarlo con Ulrich. mm
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  La búsqueda de reglas implícitas ha sido efectuada."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Tema del patrón implícita/estática: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  El archivo es una dependencia intermedia."
+
+# Sugerencia: "crea". sv
+# Ok. Aunque, viendolo bien, que tal "hace"? mm.
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  También hace:"
+
+# ¿y "comprobó"? sv
+# Ok. Mejora. mm
+# No pondría nunca, sino simplemente 'no se comprobó 'em+
+# Si, es lo mismo pero es más español. mm
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  La fecha de modificación no se comprobó."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  El archivo no existe."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  El archivo es muy viejo."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Última modificación %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  El archivo ha sido actualizado."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  El archivo ha sido actualizado."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Las instrucciones continúan en ejecución (ESTO ES UN BUG)."
+
+# ¿No sería más bien "las instrucciones de las dependencias"? sv
+# Si, que babas soy. Ahora corrijo. mm
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+"#  Las instrucciones de las dependencias continúan en ejecución (ESTO ES UN "
+"BUG)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Actualizado con éxito."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Necesita ser actualizado (la opción -q está activa)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Fallo al ser actualizado."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  ¡Valor inválido en el miembro 'command_state'!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Archivos"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# estadísticas de la tabla «hash» de los archivos:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: El campo '%s' no está en «cache»: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "el primer argumento de la función 'word' no es numérico"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "el primer argumento de la función 'word' debe ser mayor que 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "el primer argumento de la función 'wordlist' no es numérico"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "el segundo argumento de la función 'wordlist' no es numérico"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: fallo en DuplicateHandle(In), (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: fallo en DuplicateHandle(Err), (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "Fallo en CreatePipe(), (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): fallo en process_init_fd()\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Limpiando el archivo temporal %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "abrir: %s: %s"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "escribir: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Operación de archivo no válida: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "Número de argumentos (%d) insuficientes para la función '%s'"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "No implementado en esta plataforma: función '%s'"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "la llamada a la función '%s' no concluyó: falta '%c'"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Nombre de función vacío\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Nombre de función no válido: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Nombre de función demasiado largo: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Número insuficiente de argumentos (%d) para la función %s\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "El número máximo de argumentos (%d) no es válido para la función %s\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: la opción '%s' es ambigua\n"
+
+# No admite ningún argumento. sv
+# Ok. Y vuelve la burra al trigo. mm
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: la opción '--%s' no admite ningún argumento\n"
+
+# Lo mismo. sv
+# Ok. mm
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: la opción '%c%s' no admite ningún argumento\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: la opción '%s' requiere un argumento\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: opción no reconocida '--%s'\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: opción no reconocida '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opción inválida -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: opción inválida -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: la opción requiere un argumento -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: la opción '-W %s' es ambigua\n"
+
+# No admite ningún argumento. sv
+# Ok. Y vuelve la burra al trigo. mm
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: la opción '-W %s' no admite ningún argumento\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Expandiendo '%s'\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Evaluando '%s'\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "no se pueden reservar %lu bytes para la tabla «hash»: memoria agotada"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Carga=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Colisiones=%ld/%ld=%.0f%%"
+
+# Y no sería mejor "Buscando una regla implícita ..."
+# Ten en cuenta que este mensaje no parece un mensaje de error, sino más
+# de "debug" o de "verbose". sv
+# Cierto. mm
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Buscando una regla implícita para '%s'.\n"
+
+# Lo mismo.
+# Buscando una regla implítita para el miembro del archivo  `%s' em+
+# Se me resbaló. mm
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Buscando una regla implícita para el miembro del archivo '%s'.\n"
+
+# Pues si ilegal le suena a cárcel a Enrique, "evade" me suena a mí a
+# escaparse de la cárcel... (fuga de alcatraz :-)
+# te voy a dar yo a tí fuga ... em+
+# ¿Qué te parecería "se evita"? sv
+# Me gusta evade, pero evita es correcto. Acepto tu sugerencia. mm
+# No me gusta se evita, pondría evitando em+
+# Ok. Pero a mi paranoia de evitar gerundios dónde la dejas? mm
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Evitando la recursión en la regla implícita.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Tema demasiado largo: '%.*s'.\n"
+
+# FUZZY
+# Esto me suena fatal. Se a que se refiere, porque lo
+# he visto, pero en cristiano no se si podría entenderlo.
+# se refiere a las reglas del tipo % , lo pongo FUZZY , tendré
+# que pensar un poco en ello em+
+# De momento cambio la regla patron por una regla de patron , y
+# pondría a toda costa gerundio ( intentando ) em+
+# Ok con el gerundio. Pero también tengo que meditarlo. mm
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Intentando una regla de patrón con el tema '%.*s'.\n"
+
+# ## Corrijo la palabra "dependencia". sv
+# Cuando aparezca este mensaje tendrá poco menos que sentido
+# testimonial. Date cuenta que los argumentos estan cambiados.
+# Pon el orden correcto, siempre será más lógico que lo que vaya a
+# aparecer tal y como está ahora (Se rechaza la dependencia imposible
+#  `%s' `%s )'em+
+# Ok. mm
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Se rechaza la regla de dependencia imposible '%s'.\n"
+
+# ## Corrijo la palabra "dependencia". sv
+# Cuando aparezca este mensaje tendrá poco menos que sentido
+# testimonial. Date cuenta que los argumentos estan cambiados.
+# Pon el orden correcto, siempre será más lógico que lo que vaya a
+# aparecer tal y como está ahora (Se rechaza la dependencia imposible
+#  `%s' `%s )'em+
+# Ok. mm
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Se rechaza la dependencia implícita imposible '%s'.\n"
+
+# FUZZY
+# Esto me suena fatal. Se a que se refiere, porque lo
+# he visto, pero en cristiano no se si podría entenderlo.
+# se refiere a las reglas del tipo % , lo pongo FUZZY , tendré
+# que pensar un poco en ello em+
+# De momento cambio la regla patron por una regla de patron , y
+# pondría a toda costa gerundio ( intentando ) em+
+# Ok con el gerundio. Pero también tengo que meditarlo. mm
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Intentando la regla de dependencia '%s'.\n"
+
+# Pues si ilegal le suena a cárcel a Enrique, "evade" me suena a mí a
+# escaparse de la cárcel... (fuga de alcatraz :-)
+# te voy a dar yo a tí fuga ... em+
+# ¿Qué te parecería "se evita"? sv
+# Me gusta evade, pero evita es correcto. Acepto tu sugerencia. mm
+# No me gusta se evita, pondría evitando em+
+# Ok. Pero a mi paranoia de evitar gerundios dónde la dejas? mm
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Probando la dependencia implícita '%s'.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Se encontró la dependencia '%s' como la VPATH '%s'.\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Se busca una regla con el archivo intermedio '%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "No se puede crear un archivo temporal\n"
+
+# Sugerencia: " (volcado de `core')". sv
+# volcado de `core' no significa nada, que te parece si mejor dejamos
+# el core dumped, o bien volcado del núcleo o algo así. Por el momento
+# no cambio nada. mm
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core dumped) [Núcleo vaciado a un archivo]"
+
+# Preferiría mil veces "sin efecto" o algo parecido. sv
+# Ok. Habíamos quedado en `no tiene efecto'. mm
+#: job.c:488
+msgid " (ignored)"
+msgstr " (no tiene efecto)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<integrado>"
+
+# No me gusta esta traducción de override. Mira a ver
+# si encaja mejor alguna de las dos que se proponen arriba
+# em+
+# Aunque no me acaba de convencer, que te parece ésto? mm
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: fallo en las instrucciones para el objetivo '%s'"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Error %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Error 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+# ¿Y job -> trabajos? sv
+# Si, pero no hablas de una computadora multi-trabajos sino multi-tareas.
+# Por eso elegí tareas. Lo platicamos con más calma? mm
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Se espera a que terminen otras tareas...."
+
+# ¿De verdad se dice "vivo"? Si es un proceso, se me ocurre "activo". sv
+# Me gusta lo de activo. mm
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Hijo activo %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (remoto)"
+
+# Lo mismo, pon Proceso hijo, y quita lo que hay
+# entre paréntesis em+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Se recupera al proceso hijo perdido %p PID %s %s\n"
+
+# Lo mismo, pon Proceso hijo, y quita lo que hay
+# entre paréntesis em+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Se recupera al proceso hijo ganador %p PID %s %s\n"
+
+# Give up no es enfocar, es abandonar, o desistir em+
+# Si, metí la pata. mm
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Se limpia el archivo temporal %s\n"
+
+# Give up no es enfocar, es abandonar, o desistir em+
+# Si, metí la pata. mm
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Fallo al limpiar el archivo temporal por lotes %s (%d)\n"
+
+# Proceso hijo em+
+# Ok.
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Se elimina al proceso hijo %p PID %s%s de la cadena.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "liberar semáforo del servidor de tareas: (Error %ld: %s)"
+
+# Lo mismo, pon Proceso hijo, y quita lo que hay
+# entre paréntesis em+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Se libera el token para el proceso hijo %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "escribir en el servidor de tareas"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "fallo en process_easy() para lanzar al proceso (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Se contaron %d argumentos en el lanzamiento fallido\n"
+
+# Proceso hijo em+
+# Ok.
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Se pone al proceso hijo %p (%s) PID %s%s en la cadena.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "semáforo o proceso hijo en espera: (Error %ld: %s)"
+
+# Lo mismo, pon Proceso hijo, y quita lo que hay
+# entre paréntesis em+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Se obtiene el token para el proceso hijo %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "tubería de trabajos leídos"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: el objetivo '%s' no existe"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: actualizar el objetivo '%s' a causa de: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "no se pueden forzar los límites de carga en este sistema operativo"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "no se puede forzar la carga límite: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "no hay más manejadores de archivos: no se puede duplicar stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "no hay más manejadores de archivos: no se puede duplicar stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "no hay más manejadores de archivos: no se puede duplicar stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "No se puede restaurar stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "No se puede restaurar stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "No se puede restaurar stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "hacer un hijo descarriado %s, aún se espera por el pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: No se encontró el programa"
+
+# ¿Y "el programa Shell"? (a secas) sv
+# Si. Suena mucho mejor. mm
+# Suena, pero no es mejor. Tal y como esta escrito, incluso
+# yo pensaria que me falta un programa en mi sistema que se
+# llame shell. No se ha encontrado el 'shell'em+
+# Es bueno contar con una segunda opinión ... mm
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: No se ha encontrado el `shell'"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: el espacio ambiental podría estar agotado"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL ha cambiado (era '%s' y ahora es '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Se crea el archivo temporal %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Contenido del archivo de lotes:%s\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Contenido del archivo de lotes:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (linea %d) Contexto de shell erróneo (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[TIPO] (--output-sync[=TIPO]) no está configurado para este «build»."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Fallo al abrir tabla global de símbolos: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+"El objeto %s que se ha cargado no está declarado como compatible con GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Fallo al cargar símbolo %s desde %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Nombre de símbolo vacío en la carga: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Cargando símbolo %s desde %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "La operación 'load' no está implementada en esta plataforma."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opciones:\n"
+
+# Lo mismo de arriba con "ignorar". sv
+# Ok. mm.
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+"  -b, -m                      No se tendrá en cuenta por compatibilidad.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Hace incondicionalmente todos los objetivos.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORIO, --directory=DIRECTORIO\n"
+"                              Se cambia al DIRECTORIO antes de hacer nada.\n"
+
+# ¿"depurado" o "depuración"? sv
+# Puse de depurado para evitar la cacofonía información depuración.
+# Sugerencias bienvenidas. mm
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d          Se imprimirán grandes cantidades de información de depurado.\n"
+
+# ¿"depurado" o "depuración"? sv
+# Puse de depurado para evitar la cacofonía información depuración.
+# Sugerencias bienvenidas. mm
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=BANDERAS]    Se imprimirán varios tipos de información de "
+"depurado.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                Las variables ambientales se imponen a las de los "
+"makefiles.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"   --eval=CADENA               Evalúla la CADENA como una instrucción de un "
+"makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f ARCHIVO, --file=ARCHIVO, --makefile=ARCHIVO\n"
+"                                   Lee al ARCHIVO como un makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Muestra este mensaje y finaliza.\n"
+
+# Ojo con ignorar. sv
+# Ok. mm
+# Por favor, si has traducido commands como instrucciones , hazlo aqui
+# tambien.
+# No me gusta este mensaje, preferiría: Se ignoran los errores obtenidos
+# en la ejecución de las instrucciones  em+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         No se toman en cuenta los errores provenientes "
+"de las instrucciones.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIRECTORIO, --include-dir=DIRECTORIO\n"
+"                       Busca dentro del DIRECTORIO los makefiles incluidos.\n"
+
+# Yo traduciría "infinite" por "infinitos", no por "una infinidad", que
+# parece que son muchos menos... sv
+# Ok. mm
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]      Se permiten N trabajos a la vez; si no se "
+"especifica un\n"
+"argumento son infinitos.\n"
+
+# No entiendo por qué aquí empleas subjuntivo: "pudieron". sv
+# Es incorrecto. Es una de las opciones `k' que dice... mm
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Sigue avanzando aún cuando no se puedan crear "
+"algunos objetivos.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"      No inicia con trabajos múltiples a menos que la carga esté por debajo "
+"de N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Utiliza el último mtime entre los enlaces "
+"simbólicos y los objetivos.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              No ejecuta ninguna instrucción; sólo las "
+"muestra.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o ARCHIVO, --old-file=ARCHIVO, --assume-old=ARCHIVO\n"
+"                           Supone que ARCHIVO es muy viejo y no lo "
+"reconstruye.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TIPO], --output-sync[=TIPO]\n"
+"                              Sincroniza la salida de tareas paralelas por "
+"tipo.\n"
+
+# de 'make' em+
+# ok. mm
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       Se imprime la base de datos interna de "
+"'make'.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question             No se ejecutan las instrucciones; el estado de "
+"salida\n"
+"                                     indicará si están actualizados.\n"
+
+# ¿desabilitan o deshabilitan? sv
+# Error de dedo. mm
+# ¡ Por favor ! , ¿ pero qué es eso de interconstruidas ?
+# Pon almacenadas internamente, que es exactamente lo que son :) em+
+# Bueno, bajo protesta. mm
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Se deshabilitan las reglas implícitas "
+"almacenadas internamente.\n"
+
+# ¿desabilitan o deshabilitan? sv
+# Error de dedo. mm
+# ¡ Por favor ! , ¿ pero qué es eso de interconstruidas ?
+# Pon almacenadas internamente, que es exactamente lo que son :) em+
+# Bueno, bajo protesta. mm
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Se deshabilitan los ajustes a las variables "
+"almacenadas internamente.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       No muestra las intrucciones.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Desactiva la opción -k.\n"
+
+# Se *tocan*, ¿no? sv
+# Si. mm
+#
+# Pues entonces cámbialo arriba tambien em+
+# En donde? mm
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Se tocan los objetivos en vez de "
+"reconstruirlos.\n"
+
+# ¿"depurado" o "depuración"? sv
+# Puse de depurado para evitar la cacofonía información depuración.
+# Sugerencias bienvenidas. mm
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Muestra trazas.\n"
+
+# Me comería el "Se" inicial. "Muestra la versión..." sv
+# Ok. mm
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Muestra la versión del make y finaliza.\n"
+
+# Lo mismo. sv
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Muestra el directorio actual.\n"
+
+# Lo mismo. sv
+# Turn off , desactiva o deshabilita , pero no apaga em+
+# apaga luz Mari Luz apaga luz ,que yo no puedo vivir con
+# tanta luz ... ( canción tradicional ) ( no lo pude evitar ) em+
+# Juar, Juar, Juar. Coincido, pero el sentido es el mismo. mm
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Desactiva -w, aún cuando haya sido activado "
+"implícitamente.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W ARCHIVO, --what-if=ARCHIVO, --new-file=ARCHIVO, --assume-new=ARCHIVO\n"
+"                               Supone que ARCHIVO es infinitamente "
+"reciente.\n"
+
+# Lo mismo. sv
+# Todas estas parecen descripciones de opciones.
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Advierte cuando se hace una referencia a una "
+"variable no definida.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "no se permite que una cadena vacía sea el nombre de un archivo"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "se especificó un nivel de depuración desconocido '%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "tipo de sincronización de salida desconocido '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+"%s: Se atrapó una interrupción/excepción (código = 0x%lx, dirección = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Se ha llamado un filtro de excepción no manejado desde el programa %s\n"
+"Código de la excepción = %lx\n"
+"Banderas de la excepción = %lx\n"
+"Dirección de la excepción = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Violación de acceso: operación de escritura en la dirección 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Violación de acceso: operación de lectura en la dirección 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "la función find_and_set_shell() pone el valor del default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"la función find_and_set_shell() pone el valor de la ruta de búsceda "
+"default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s está suspendida por 30 segundos..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "se hizo un sleep(30). Continuando.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"error interno: no se pudo abrir el semáforo del servidor de tareas '%s': "
+"(Error %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Cliente del servidor de tareas (semáforo %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "error interno: cadena --jobserver-fds inválida '%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Cliente del servidor de tareas (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"atención: se fuerza a -jN en el submake: se deshabilita el modo de servidor "
+"de tareas."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "servidor de tareas duplicado"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"atención: el servidor de tareas no está disponible: se utilizará -j1. Añada "
+"'+' a la regla padre del make."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr ""
+"El archivo Makefile ha sido especificado dos veces desde la entrada estándard"
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (archivo temporal)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (archivo temporal)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+"Los trabajos en paralelo (-j) no están implementados en esta plataforma."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Reajustando al modo monotarea (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Ranuras del servidor de tareas limitads a %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "creando semáforo del servidor de tareas: (Error %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "creando una tubería de tareas"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "se inicializa la tubería al servidor de tareas"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Los enlaces simbólicos no están implementados: se deshabilitan con -L."
+
+# Antes pusiste "makefiles". Coherencia. sv
+# Cierto. mm
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Actualizando archivos makefiles....\n"
+
+# Me comería el "archivo" inicial.
+# Ok. mm
+# "El Makefile `%s' ..." sv
+# Pondría ( como en un mensaje anterior ) se autoreferencia ... em+
+# He puesto makefile con minúsculas , par ser coherentes em+
+# Ok. Es más breve. mm.
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+"El makefile '%s' podría entrar en bucle; por lo tanto, no se reconstruye.\n"
+
+# Lo mismo. sv
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Fallo al reconstruir el makefile '%s'."
+
+# Lo mismo. sv
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "No se encontró el makefile incluído '%s'."
+
+# Lo mismo. sv
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "No se encontró el makefile '%s'"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "No se pudo regresar al directorio original."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Re-ejecutando[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (archivo temporal)"
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL contien más de un objetivo"
+
+# Sugerencia: "No se especificó ningún objetivo ... " sv
+# Ok. Me gusta. mm
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "No se especificó ningún objetivo y no se encontró ningún makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "No hay objetivos"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Actualizando los objetivos finales....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"atención: Se ha detectado una desviación en el reloj. La construcción podría "
+"estar incompleta."
+
+# ¿Y Modo de empleo? sv
+# Soy medio bestia. Debería hacerlo automático. mm
+# "target" es "objetivo", no "objetivos". Fíjate que lleva puntos
+# suspensivos, permitiendo así varios objetivos. sv
+# Ok. mm
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Modo de empleo: %s [opciones] [objetivo] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Este programa fue construido para %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Este programa construido para %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Informe sobre los errores a <bug-make@gnu.org>\n"
+
+# Me comería el "de" de "requiere de" sv
+# Ok. mm
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "la opción '%s%s' requiere un argumento no-vacío de tipo cadena"
+
+# Me comería el "de" de "requiere de" sv
+# Ok. mm
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "la opción '-%c' requiere un argumento positivo y entero"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sEste programa fue construido para %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sEste programa fue construido para %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicencia GPLv3+: GNU GPL versión 3 o posterior <http://gnu.org/licenses/"
+"gpl.html>\n"
+"%sEste es software libre: cualquiera es libre para redistribuirlo y "
+"modificarlo.\n"
+"%sNo existe GARANT�A ALGUNA, hasta los límites permitidos por las leyes "
+"aplicables.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Base de datos del Make, mostrada en %s"
+
+# make -> Make. sv
+# Ok. mm
+# Porqué 'del', o pones 'del programa' Make o pones
+# 'de Make' em+
+# Ok. mm
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Se termina la base de datos de Make en %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Error desconocido %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: usuario %lu (real %lu), grupo %lu (real %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Acceso inicializado"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Acceso del usuario"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Acceso del Make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Acceso del hijo"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: se ingresa a un directorio desconocido\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: se sale del directorio desconocido\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: se entra en el directorio '%s'\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: se sale del directorio '%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: se ingresa a un directorio desconocido\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: se sale del directorio desconocido\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: se entra en el directorio '%s'\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: se sale del directorio '%s'\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "error al escribir: %s"
+
+# Interrumpido (?). sv
+# Mmgmh... El mensaje indica que hubo algún error muy grave y que por
+# eso se detiene el make. Probablemente sea mejor dejarlo así. mm
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Alto.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+# Sugerencia: eliminar la palabra "archivo". sv
+# Ok. Mejora. mm
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Leyendo makefiles...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Leyendo makefile '%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (no hay objetivo por defecto)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (ruta de búsqueda)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (no importa)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (no hay expansión del ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "se salta BOM UTF-8 en el makefile '%s'\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "se salta BOM UTF-8 en el «buffer» del makefile\n"
+
+# ## Sintaxis no llevaba tilde.
+# Ok. mm
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "sintaxis no válida en condicional"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: fallo al cargar"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "las instrucciones comenzaron antes del primer objetivo"
+
+# "falta una regla". sv
+# (es que extraviada me suena muy raro).
+# Cierto pareciera que se perdió dentro de algún circuito. mm
+# Falta 'la' regla em+
+# No no es la regla sino una regla pues puede ser cualquiera de ellas. mm
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "falta una regla antes de las instrucciones"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (¿Quiere decir TAB en vez de 8 espacios?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "falta un separador%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "falta un patrón de objetivos"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "hay varios patrones de objetivos"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "el patrón de objetivo no contiene '%%'"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "falta un 'endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nombre de variable vacío"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr ""
+"Hay un texto irrelevante o mal colocado después de la instrucción 'define'"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "falta un 'endef', no se terminó un 'define'"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr ""
+"Hay un texto irrelevante o mal colocado después de la instrucción 'endef'"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Texto irrelevante o mal colocado después de la instrucción '%s'"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "irrelevante o mal colocado '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "sólo se admite un 'else' por condicional"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr ""
+"La definición de las variables específicas al blanco está mal construida"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+"los prerequisitos no pueden ser definidos por los guiones de instrucciones"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "las reglas implícitas y las de patrón estático están mezcladas"
+
+# Y 'las' normales  em+
+# Ok. mm
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "las reglas implícitas y las normales están mezcladas"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "el objetivo '%s' no coincide con el patrón de objetivos"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "el archivo de objetivos '%s' tiene líneas con : y ::"
+
+# Cambiaría given por 'proporcionó' o 'indicó' em+
+# Ok. mm
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "el objetivo '%s' se proporcionó más de una vez en la misma regla"
+
+# No me gusta esta traducción de override. Mira a ver
+# si encaja mejor alguna de las dos que se proponen arriba
+# em+
+# Aunque no me acaba de convencer, que te parece ésto? mm
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "atención: se anulan las instrucciones para el objetivo '%s'"
+
+# Ojo con ignora. sv
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "atención: se ignoran las instrucciones viejas para el objetivo '%s'"
+
+# Y 'las' normales  em+
+# Ok. mm
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "las reglas implícitas y las normales están mezcladas"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "atención: hay un carácter NUL; se ignora el resto de la línea"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "No se hace nada para '%s'."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' está actualizado."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Se poda el archivo '%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%sNo hay ninguna regla para construir el objetivo '%s', necesario para '%s'%s"
+
+# Sugerencia: No hay ninguna regla... sv
+# Como una no hay ninguna. mm
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sNo hay ninguna regla para construir el objetivo '%s'%s"
+
+# ¿target file no sería "archivo objetivo"? sv
+# Literalmente si pero un archivo make puede tener varios objetivos. mm
+# Max , pero no existe un archivo de objetivos. Esta línea, que es
+# de las que aparecen al hacer un make con la opción -d ( debug )
+# se refiere a lo que dice Santiago, es decir, 'archivo objetivo'  em+
+# Ok creo que tienen razón. mm
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Se considera el archivo objetivo '%s'.\n"
+
+# Un compañero mío dice que una buena regla es poner siempre que se pueda
+# un número par de comas.
+# Es decir: "Se intentó, sin éxito, actualizar ..."
+# o bien "Se intentó sin éxito actualizar ..."
+# ¿Qué te parece? sv
+# Bien y tiene razón. mm
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Se intentó hace poco, sin éxito, actualizar el archivo '%s'.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Ya se ha tenido en cuenta el archivo '%s'.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Se continúa actualizando el archivo '%s'.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Se terminó de actualizar el archivo '%s'.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "El archivo '%s' no existe.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Atención: el archivo .LOW_RESOLUTION_TIME '%s' tiene una marca de tiempo "
+"de alta resolución"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Se encontró una regla implícita para '%s'.\n"
+
+# Se ha encontrado em+
+# Ok, pero procuro evitar como a la muerte los gerundios. mm
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "No se ha encontrado ninguna regla implícita para '%s'.\n"
+
+# Por defecto, como haces arriba em+
+# en efecto, mm
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Se utilizan las instrucciones por omisión para '%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Se elimina la dependencia circular %s <- %s."
+
+# Lo mismo de antes con "target file". sv
+# Estoy de acuerdo con él ( por una vez ;) ) em+
+# Ok. mm
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Se terminaron las dependencias del archivo objetivo '%s'.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Se están construyendo las dependencias de '%s'.\n"
+
+# Give up no es enfocar, es abandonar, o desistir em+
+# Si, metí la pata. mm
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Se abandona el archivo objetivo '%s'.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Debido a los errores, el objetivo '%s' no se reconstruyó."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "La dependencia '%s' es solo de orden para el objetivo '%s'.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "La dependencia '%s' del objetivo '%s' no existe.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "La dependencia '%s' es más reciente que el objetivo '%s'.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "La dependencia '%s' es anterior al objetivo '%s'.\n"
+
+# Ahorra espacio, y pon '::'  en vez de eso :) em+
+# Bueno, no es mala idea. A ver si te gusta lo que puse. mm
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+"El objetivo '%s' es de tipo dos puntos dos veces (::)\n"
+"y no tiene dependencias.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "No hay instrucciones para '%s' y ninguna dependencia ha cambiado.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Haciendo '%s' debido a la bandera always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "No es necesario reconstruir el objetivo '%s'."
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; se usa el nombre del VPATH '%s'"
+
+# Revisa todo el po con un search, y mira a ver si decides usar
+# regenerar o reconstruir ( prefiero lo último 10000 veces ) em+
+# Ok, buena propuesta. mm
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Se debe reconstruir el objetivo '%s'.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Se ignora el nombre del VPATH '%s'.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Las instrucciones de '%s' se están ejecutando.\n"
+
+# Target file no es archivo de objetivos, sino el archivo objetivo
+# make no tiene ningún archivo de objetivos em+
+# Ok. mm
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Fallo al reconstruir el archivo objetivo '%s'.\n"
+
+# Lo mismo em+
+# Ok. mm
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Se reconstruyó con éxito el archivo objetivo '%s'.\n"
+
+# Otra vez em+
+# Ok, no te puedes quejar de falta de consistencia en este caso! mm
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Se necesita reconstruir el archivo objetivo '%s' con la opción -q.\n"
+
+# Por defecto, como haces arriba em+
+# en efecto, mm
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Se utilizan las instrucciones por defecto para '%s'.\n"
+
+# Ubicada :)) , que tal futura, a secas ? em+
+# Bueno, sonaba como StarTrek, muy chido, pero acepto tu sugerencia. mm
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Atención: El archivo '%s' tiene una hora de modificación en el futuro"
+
+# Ubicada :)) , que tal futura, a secas ? em+
+# Bueno, sonaba como StarTrek, muy chido, pero acepto tu sugerencia. mm
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+"Atención: El archivo '%s' tiene una hora de modificación %s s en el futuro"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "El elemento .LIBPATTERNS '%s' no es un patrón"
+
+# ¿Las aduanas? sv
+# Si, las aduanas de exportación de procesos. Suena rarísimo pero
+# revisé el código y todo parece apuntar a que así son las cosas.
+# Creo que esto es otra cosa. Custom se refiere a los valores dados
+# por el usuario ( customizables ) , y que no se exportarán se refiere
+# a que al llamar a otros makefiles, no serán pasados como valores
+# que se antepongan ( otro término para override ) a los que make
+# tiene por defecto .
+# La traducción exacta por tanto es, los valores definidos por el usuario
+# no se exportarán em+
+# Muchísimo más claro (es más me gusta más en español que en inglés con tu
+# arreglo) mm
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Los valores definidos por el usuario no se exportarán: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Reglas implícitas."
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# No hay reglas implícitas."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u reglas implícitas, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+# ## Añado ¡ con tu permiso. sv
+# Gracias. mm
+# ¿ qué tal erróneo ? em+
+# Si, suena mejor. mm
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: ¡num_pattern_rules erróneo!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "señal desconocida"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Colgado"
+
+# ¿ Y por qué no Interrupción ? em+
+# Porque es una acción. De hecho es un mensaje que se envía a través
+# del sistema en este caso le enviarías un kill -INT num_proceso para
+# interrumpir al programa. Lo revisé contra el fuente. mm
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interrumpir"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Finalizar"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Instrucción no válida"
+
+# Los trap los hemos dejado como traps, simplemente. em+
+# Ok. mm
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Trace/breakpoint trap"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Abortado"
+
+# Ponte de acuerdo con Enrique en cómo se traduce esto.
+# Enrique tiene esta misma frase en glibc. sv
+# Eso es :) IOT trap em+
+# Ok. mm
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT trap"
+
+# Otra em+
+# Ok. mm
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT trap"
+
+# Coma flotante, por favor. sv
+# Creeme que aquí lo de coma flotante no vale. Somos pro-yanquis y
+# por eso usamos el punto flotante. Debemos llegar a un acuerdo.
+# Por ahora pongo coma flotante para facilitar las cosas, pero bajo
+# protesta ;-) mm
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Excepción de coma flotante"
+
+# "Terminado por la señal kill" quedaría un poco más suave ... sv
+# Enrique tiene en glibc "Terminado (killed)". sv
+# Bueno, creo que mi traducción es más exacta, concisa y clara
+# pero si insisten... Además recuerda en que estoy en un país
+# en donde asesinado es palabra de todos los días. mm
+#: signame.c:121
+msgid "Killed"
+msgstr "Terminado (killed)"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Error en el bus"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Fallo de segmentación"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Llamada al sistema errónea"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Tubería rota"
+
+# ¿Temporizador? (así lo tradujo Enrique en glibc). sv
+# Suena como StarTrek. Mejor lo platico con él. A lo mejor
+# hasta lo convenzo. mm
+# Pues tendrás que darme razones em+
+# Bueno, un alarm clock es una alarma del reloj. No tiene pierde.
+# Temporizador es una bonita palabra pero en donde dice que va a
+# sonar una campana para despertarte? mm
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarma del reloj"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Finalizado"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Señal 1 definida por el usuario"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Señal 2 definida por el usuario"
+
+# Proceso hijo terminado em+
+# Ok. mm
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Proceso hijo terminado"
+
+# Fallo. sv
+# Alimentación eléctrico em+
+# Ok. mm
+#: signame.c:156
+msgid "Power failure"
+msgstr "Falla de alimentación eléctrica"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Detenido"
+
+# Enrique hizo una preciosa traducción de este mensaje que, según él,
+# mejora el original. Era algo así como:
+# "Detenido (requiere entrada de terminal)". sv
+# Tiene razón se ve bien. mm
+# Requiere 'de';) , como te vea Santiago que le metes
+# otro 'de' otra vez ... em+
+# Ok. mm
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Detenido (se requiere entrada de terminal)"
+
+# lo mismo, se requiere entrada de terminal ,  em+
+# Ok. mm
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Detenido (se requiere salida de terminal)"
+
+# idem em+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Detenido (se requiere una señal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Se agotó el tiempo de CPU permitido"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Se excedió el tamaño máximo de archivo permitido"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "El contador de tiempo virtual ha expirado"
+
+# Nunca me enteré de cómo se traducía profile, pero perfil me suena raro.
+# ¿De dónde lo has sacado? sv
+# Es lo que quiere decir, ni modo. Perfil de un avión es plane profile.
+# Por cierto, lo más probable es que esta "traducción" haya que
+# modificarla para que sea entendible. mm
+# Esto lo tengo en glibc, lo mirare otro día. Estos mensajes no son
+# importantes em+
+# Agregué unas palabras en aras de claridad (espero) mm
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "El contador de tiempo para la generación del perfil ha expirado"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "La ventana ha cambiado"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Continuado"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Condición urgente de I/O"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Posible I/O"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Recurso perdido"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Señal de peligro"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Petición de información"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Coprocesador de punto flotante no disponible"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s No hay «buffers» strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s «buffers» strcache: %lu (%lu) / cadenas = %lu / almacenamiento = %lu B / "
+"promedio = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s «buffer» actual: tamaño = %hu B / utilizado = %hu B / número = %hu / "
+"promedio = %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+"%s otros utilizado: total = %lu B / / número = %lu / promedio = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s otros libre: total = %lu B / máx = %lu B / mín = %lu B / promedio = %hu "
+"B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s rendimiento de strcache: búsquedas = %lu / coincidencias = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# estadísticas de la tabla «hash»:\n"
+"# "
+
+# Lo he cmabiado em+
+# Ok. Deberíamos platicarlo con Ulrich. mm
+#: variable.c:1599
+msgid "automatic"
+msgstr "automática/o"
+
+#: variable.c:1602
+msgid "default"
+msgstr "por defecto"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "entorno"
+
+# Sugerencia: No poner archivo. sv
+# Ok. mm
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+# 'bajo -e' = 'con -e activo' em+
+# Ok. Esta inversión en los idiomas sajones se pega. mm
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "con -e activo"
+
+# Línea de comandos me parece correcto em+
+# Ver arriba. Estoy de acuerdo si así han traducido en otros lados. mm
+#: variable.c:1614
+msgid "command line"
+msgstr "línea de instrucciones"
+
+# Creo que tendremos un problema con instrucción, comando
+# , programa y directiva . Está claro que aquí es directiva em+
+# Ok, pero no deja de sonar a RoboCop. A ver que te parece como quedó. mm
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "directiva 'override'"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (de '%s', línea %lu):"
+
+# Bueno. Aquí un punto de discusión. Traduzco buckets por cubetas o
+# mejor las dejo tal cual? Opiniones bienvenidas. mm
+# Estos mensajes son para debug, no creo que haga falta usar cubetas ;) em+
+# Tienes razón, si el debugueador no lo entiende pues, ... que se
+# dedique a otra cosa. mm
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# estadísticas del conjunto de variables de la tabla «hash»:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variables\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Valores de variables específicas al patrón"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# No hay valores de variables específicas al patrón."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u valores de variables específicas al patrón"
+
+# ¿Qué te parece "atención"? Lo hemos usado mucho en otros programas. sv
+# Pero que bestia soy. Perdón por el desbarre. mm
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "atención: la variable '%.*s' no ha sido definida"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "fallo en sys$search() con %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Atención: redirección vacía\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "error interno: '%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-atención, deberás rehabilitar el manejo del CTRL-Y desde el DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "INTERCONSTRUIDO [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "CD INTERCONSTRUIDO %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "CD INTERCONSTRUIDO %s\n"
+
+# Por defecto, como haces arriba em+
+# en efecto, mm
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Instrucción integrada desconocida '%s'.\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Error, comando vacío\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Entrada redirigida desde %s\n"
+
+# Probablemente sea aquí donde haya que ponerle el "el" para que "Entering"
+# concuerde bien con esta frase y con la anterior simultáneamente. sv
+# No. Ya revisé el fuente y transcribo el trozo pertinente:
+#  char *message = entering ? "Entering" : "Leaving";
+#  if (makelevel == 0)
+#    printf ("%s: %s ", program, message);
+#  else
+#    printf ("%s[%u]: %s ", program, makelevel, message);
+# Como notarás lo del directorio va en otro lado.
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Se redirecciona el error a %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Salida redirigida a %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Salida redirigida a %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Agregada a %.*s y limpieza\n"
+
+# "en sustituto" me suena muy raro. Propongo: "en su lugar" en su lugar :-) sv
+# Ok. mm
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "En su lugar, se ejecuta %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Error al lanzar el proceso %d\n"
+
+# ¿Y al revés?: Rutas de búsqueda VPATH. sv
+# Mejora
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Rutas de búsqueda VPATH\n"
+
+# Rutas creo que queda mejor. sv
+# Ok. Es más común. mm
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# No hay rutas de búsqueda 'vpath'."
+
+# ¡Ah! Aquí si que pones el vpath al final, ¿eh? :-) sv
+# You really got me! mm
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u rutas de búsqueda 'vpath'.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# No hay ruta de búsqueda general (variable 'VPATH')."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Ruta de búsqueda general (variable 'VPATH'):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "error interno: hay varias opciones --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "error interno: hay varias opciones --jobserver-fds"
+
+# Propongo eliminar la palabra virtual. sv
+# Pero si es muy bonita. :) Bueno. Como ya platicamos puede que sea
+# una buena idea pero, por ahora la dejaría. mm
+#~ msgid "virtual memory exhausted"
+#~ msgstr "memoria virtual agotada"
+
+#~ msgid "write error"
+#~ msgstr "error al escribir"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "RM INTERCONSTRUIDO %s\n"
diff --git a/po/fi.gmo b/po/fi.gmo
new file mode 100644
index 0000000..4967e23
--- /dev/null
+++ b/po/fi.gmo
diff --git a/po/fi.po b/po/fi.po
new file mode 100644
index 0000000..ab3df02
--- /dev/null
+++ b/po/fi.po
@@ -0,0 +1,2312 @@
+# Finnish messages for make.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Lauri Nurmi <lanurmi@iki.fi>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.81-b3\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2005-07-06 21:36+0300\n"
+"Last-Translator: Lauri Nurmi <lanurmi@iki.fi>\n"
+"Language-Team: Finnish <translation-team-fi@lists.sourceforge.net>\n"
+"Language: fi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "yritettiin käyttää ominaisuutta, jolle ei ole tukea: \"%s\""
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "arkistojäsenten kosketus ei ole mahdollista VMS:ssä"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Arkistoa \"%s\" ei ole olemassa"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: \"%s\" ei ole kelvollinen arkisto"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Arkistossa \"%1$s\" ei ole jäsentä \"%2$s\""
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: ar_member_touch antoi virheellisen paluuarvon kohteesta \"%s\""
+
+#: arscan.c:124
+#, fuzzy, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module epäonnistui moduulitietojen noutamisessa, tila = %d"
+
+#: arscan.c:230
+#, fuzzy, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control epäonnistui, tila = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "kirjastoa \"%s\" ei voi avata jäsenen \"%s\" etsimiseksi"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Jäsen \"%s\"%s: %ld tavua kohdassa %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (nimi voi olla typistynyt)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Päiväys %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, oikeudet = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Katkaisu.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Arkistojäsen \"%s\" voi olla viallinen - ei poisteta"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Arkistojäsen \"%s\" voi olla viallinen - ei poisteta"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Poistetaan tiedosto \"%s\""
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Poistetaan tiedosto \"%s\""
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  käynnisetttävät komennot"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (sisäänrakennettu):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (tiedostosta \"%s\", rivi %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Hakemistot\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: tilaa ei voitu lukea.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (avain %s, maika %d): ei voitu avata.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (laite %d, i-solmu [%d,%d,%d]): ei voitu avata.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (laite %ld, i-solmu %ld): ei voitu avata.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (avain %s, maika %d: "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (laite %d, i-solmu [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (laite %ld, i-solmu %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Ei"
+
+# Juuri näin, muodostetaan käännöslause yksittäisistä sanoista...
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " tiedostoa, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "ei"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " mahdottomuutta"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " tähän mennessä."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " mahdottomuutta %lu hakemistossa.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekursiivinen muuttuja \"%s\" viittaa (lopulta) itseensä"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "päättämätön muuttujaviittaus"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Tiedostolle \"%s\" määriteltiin komentoja paikassa %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Tiedostolle \"%s\" löytyi komentoja oletussääntöhaussa,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "mutta \"%s\":n katsotaan nyt olevan sama tiedosto kuin \"%s\"."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Tiedoston \"%s\" komentoja ei huomioida, vaan käytetään komentoja "
+"tiedostosta \"%s\"."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Poistetaan aputiedosto \"%s\""
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Poistetaan aputiedostot...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Tämänhetkinen aika"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Aikaleima ei ole sallitulla välillä, korvataan %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Ei kohde:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Arvokas tiedosto (ennakkoehto .PRECIOUS:ille)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Valekohde (ennakkoehto .PHONY:lle)."
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  Komentorivikohde."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Oletus-, MAKEFILES- tai -include/sinclude -makefile-tiedosto."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Ei oletussääntöjä."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Oletussääntöhaku on suoritettu."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Oletussääntöhakua ei ole suoritettu."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr ""
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Tiedosto on välitason ennakkoehto."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Tuotetaan myös:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Muutosaikaa ei koskaan tarkastettu."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Tiedosto ei ole olemassa."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Tiedosto on hyvin vanha."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Viimeksi muutettu %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Tiedosto on päivitetty."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Tiedostoa ei ole päivitetty."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Ajossa olevat komennot (TÄMÄ ON OHJELMISTOVIKA)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Ajossa olevat riippuvuuskomennot (TÄMÄ ON OHJELMISTOVIKA)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Päivitetty onnistuneesti."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Vaatii päivitystä (-q on asetettu)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Päivitys epäonnistui."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Virheellinen arvo \"command_state\"-jäsenessä!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Tiedostot"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# tilasto tiedostojen hajautustaulusta:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "ei-numeerinen ensimmäinen argumentti \"word\"-funktiolle"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "\"word\"-funktion ensimmäisen argumentin on oltava suurempi kuin 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "ei-numeerinen ensimmäinen argumentti \"wordlist\"-funktiolle"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "ei-numeerinen toinen argumentti \"wordlist\"-funktiolle"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(In) epäonnistui (v=%d)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(Err) epäonnistui (v=%d)\n"
+
+#: function.c:1530
+#, fuzzy, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() epäonnistui (v=%d)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): process_init_fd() epäonnistui\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Siivotaan väliaikainen komentotiedosto %s\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "kirjoitusvirhe: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "Liian vähän (%d) argumenttejeja funktiolle \"%s\""
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "Ei toteutettu tällä alustalla: funktio \"%s\""
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "päättämätön kutsu funktioon \"%s\": puuttuva \"%c\""
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Liian vähän (%d) argumenttejeja funktiolle \"%s\""
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Liian vähän (%d) argumenttejeja funktiolle \"%s\""
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: valitsin \"%s\" on moniselitteinen\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: valitsin \"--%s\" ei salli argumenttia\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: valitsin \"%c%s\" ei salli argumenttia\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: valitsin \"%s\" vaatii argumentin\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: tunnistamaton valitsin \"--%s\"\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: tunnistamaton valitsin \"%c%s\"\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: virheellinen valitsin -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: virheellinen valitsin -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: valitsin vaatii argumentin -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: valitsin \"-W %s\" on moniselitteinen\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: valitsin \"-W %s\" ei salli argumenttia\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, fuzzy, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "ei voida varata %ld tavua hajautustaululle: muisti lopussa"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Kuormitus=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Uudelleenhajautus=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Törmäykset=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Etsitään oletussääntöä kohteelle \"%s\".\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Etsitään arkistojäsenen oletussääntöä kohteelle \"%s\".\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Vältetään oletussääntörekursio.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Kokeillaan hahmosääntöä rungolla \"%.*s\".\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Hylätään mahdoton säännön ennakkoehto \"%s\".\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Hylätään mahdoton oletusennakkoehto \"%s\".\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Yritetään käyttää säännön ennakkoehtoa \"%s\".\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Yritetään käyttää oletusennakkoehtoa \"%s\".\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Löydettiin ennakkoehto \"%s\", joka on VPATH \"%s\"\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Etsitään sääntöä aputiedostolla \"%s\".\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Väliaikaistiedoston luominen ei onnistu\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (muisti vedostettu)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Virhe %d (ei huomioida)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (sisäänrakennettu):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Virhe %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Virhe 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Odotetaan keskeneräisiä töitä...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr ""
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (etä)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Siivotaan väliaikainen komentotiedosto %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Siivotaan väliaikainen komentotiedosto %s\n"
+
+#: job.c:961
+#, fuzzy, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Poistetaan ketjusta lapsiprosessi 0x%08lx PID %ld%s.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "työpalvelimen kirjoitus"
+
+#: job.c:1662 job.c:2387
+#, fuzzy, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() epäonnistui prosessin käynnistämisessä (v=%d)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Laskettiin %d argumenttia epäonnistuneessa käynnistyksessä\n"
+
+#: job.c:1735
+#, fuzzy, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Lisätään ketjuun lapsiprosessi 0x%08lx (%s) PID %ld%s.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "työputken luku"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Arkistoa \"%s\" ei ole olemassa"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+"%1$s\"%3$s\"-kohteen tarvitseman kohteen \"%2$s\" tuottamiseen ei ole sääntöä"
+"%4$s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "kuormarajoja ei voi ottaa käyttöön tässä käyttöjärjestelmässä"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "kuormarajaa ei voi ottaa käyttöön: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"tiedostokahvoja ei ole enempää: vakiosyötteen kahdentaminen ei onnistunut\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"tiedostokahvoja ei ole enempää: vakiotulosteen kahdentaminen epäonnistui\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"tiedostokahvoja ei ole enempää: vakiosyötteen kahdentaminen ei onnistunut\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Vakiosyötettä ei voitu palauttaa\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Vakiotulostetta ei voitu palauttaa\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Vakiosyötettä ei voitu palauttaa\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Komentoa ei löytynyt"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Kuoriohjelmaa ei löytynyt"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: ympäristötila saattaa olla lopussa"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL muuttunut (oli \"%s\", nyt \"%s\")\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Luodaan väliaikainen komentotiedosto %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (rivi %d) Väärä kuoriympäristö (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Rinnakkaiset työt (-j) eivät ole tuettuja tällä alustalla."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Valitsimet:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+"  -b, -m                      Yhteensopivuuden vuoksi jätetään huomiotta.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Tuota kaikki kohteet ehdoitta.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C HAKEMISTO, --directory=HAKEMISTO\n"
+"                              Siirry HAKEMISTOon ennen jatkamista.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Näytä runsaasti vianetsintätietoja.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr "  --debug[=LIPUT]             Näytä monenlaisia vianetsintätietoja.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Ympäristömuuttujat kumoavat makefile-"
+"tiedostot.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f TIEDOSTO, --file=TIEDOSTO, --makefile=TIEDOSTO\n"
+"                              Käytä TIEDOSTOa makefile-tiedostona.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Näytä tämä viesti ja poistu.\n"
+
+#: main.c:335
+#, fuzzy
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Älä huomioi suoritettujen komentojen "
+"virheitä.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I HAKEMISTO, --include-dir=HAKEMISTO\n"
+"                              Etsi sisällytettäviä makefile:ja "
+"HAKEMISTOsta.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Salli N yhtäaikaista työtä; ilman N:ää "
+"ääretön.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Jatka vaikka joidenkin kohteiden tuottaminen\n"
+"                                epäonnistuisi.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Älä aloita useita töitä ellei kuormitus alle "
+"N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Käytä uusinta mtime-aikaa symlinkkien ja\n"
+"                                kohteen välillä.\n"
+
+#: main.c:349
+#, fuzzy
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Näytä ajettavat komennot, älä käynnistä "
+"niitä.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o TIEDOSTO, --old-file=TIEDOSTO, --assume-old=TIEDOSTO\n"
+"                              Käsittele TIEDOSTO vanhana, älä tuota sitä.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Näytä make:in sisäinen tietokanta.\n"
+
+#: main.c:360
+#, fuzzy
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Älä aja komentoja; paluuarvo kertoo ajan-\n"
+"                                tasaisuuden.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Poista käytöstä sisäiset oletussäännöt.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Poista käytöstä sisäiset muuttuja-asetukset.\n"
+
+#: main.c:366
+#, fuzzy
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Älä kaiuta komentoja.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Kumoaa valitsimen -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "  -t, --touch                 Kosketa kohteita tuottamisen sijaan.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  -d                          Näytä runsaasti vianetsintätietoja.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Näytä make:in versionumero ja poistu.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Näytä nykyinen hakemisto.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Kumoa -w, vaikka se olisi käytössä "
+"oletuksena.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W TIEDOSTO, --what-if=TIEDOSTO, --new-file=TIEDOSTO, --assume-"
+"new=TIEDOSTO\n"
+"                              Käsittele TIEDOSTO aina uutena.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Varoita viittauksista määrittelemättömiin\n"
+"                                muuttujiin.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "tyhjä merkkijono ei kelpaa tiedostonimeksi"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "tuntematon vianetsintätason määritys \"%s\""
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, fuzzy, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Keskeytys/poikkeus siepattu (koodi = 0x%x, osoite = 0x%x)\n"
+
+#: main.c:835
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Ohjelmasta %s kutsuttiin käsittelemätöntä poikkeussuodinta\n"
+"Poikkeuskoodi = %x\n"
+"Poikkeusliput = %x\n"
+"Poikkeusosoite = %x\n"
+
+#: main.c:843
+#, fuzzy, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Suojausvirhe: kirjoitusoperaatio osoitteeseen %x\n"
+
+#: main.c:844
+#, fuzzy, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Suojausvirhe: lukuoperaatio osoitteeseen %x\n"
+
+#: main.c:920 main.c:935
+#, fuzzy, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell asettaa default_shell = %s\n"
+
+#: main.c:988
+#, fuzzy, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell: polkuhaku asetti default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s keskeytyy 30 sekunniksi..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) valmis. Jatketaan.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "sisäinen virhe: virheellinen --jobserver-fds -merkkijono \"%s\""
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "varoitus: -jN pakotettu ali-make:ssa: poistetaan työpalvelin käytöstä."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "kaksinkertainen työpalvelin"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"varoitus: työpalvelin ei käytettävissä: käytetään -j1. Lisää \"+\" ylemmän "
+"tason make-sääntöön."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile-tiedosto vakiosyötteestä määritelty kahdesti."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (väliaikaistiedosto)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (väliaikaistiedosto)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Rinnakkaiset työt (-j) eivät ole tuettuja tällä alustalla."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Palataan yhden työn (-j1) tilaan."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "luodaan työputki"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "alustetaan työpalvelimen putki"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Ei tukea symbolisille linkeille: poistetaan -L käytöstä."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Päivitetään makefile-tiedostoja....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+"Ei uudelleentuoteta makefile-tiedostoa \"%s\" - vältetään mahdollinen "
+"ikuinen silmukka.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Makefile-tiedoston \"%s\" uudelleentuottaminen epäonnistui."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Sisällytettyä makefile-tiedostoa \"%s\" ei löytynyt."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefile-tiedostoa \"%s\" ei löytynyt"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Ei voitu siirtyä takaisin alkuperäiseen hakemistoon."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Uudelleenkäynnistetään[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (väliaikaistiedosto): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL sisältää yli yhden kohteen"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Kohteita ei ole annettu, eikä makefileä löytynyt"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Ei kohteita"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr ""
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"varoitus: Havaittu väärä kellonaika. Käännösversio saattaa olla "
+"epätäydellinen."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Käyttö: %s [valitsimet] [kohde] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Tämä ohjelma on käännetty järjestelmälle %s.\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Tämä ohjelma on käännetty järjestelmälle %s (%s).\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Ilmoita ohjelmistovioista (englanniksi) osoitteeseen <bug-make@gnu.org>.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "valitsin \"-%c\" vaatii ei-tyhjän merkkijonoargumentin"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "valitsin \"-%c\" vaatii positiivisen kokonaislukuargumentin"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"%sTämä ohjelma on käännetty järjestelmälle %s.\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"%sTämä ohjelma on käännetty järjestelmälle %s (%s).\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make-tietokanta, tulostettu %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Make-tietokanta saatu valmiiksi %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Tuntematon virhe %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: käyttäjä %lu (todellinen %lu), ryhmä %lu (todellinen %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Alkuperäiset käyttöoikeudet"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Käyttäjän käyttöoikeudet"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make-prosessin käyttöoikeudet"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Lapsiprosessin käyttöoikeudet"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Siirrytään tuntemattomaan hakemistoon\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Poistutaan tuntemattomasta hakemistosta\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Siirrytään hakemistoon \"%s\"\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Poistutaan hakemistosta \"%s\"\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Siirrytään tuntemattomaan hakemistoon\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Poistutaan tuntemattomasta hakemistosta\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Siirrytään hakemistoon \"%s\"\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Poistutaan hakemistosta \"%s\"\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "kirjoitusvirhe: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Seis.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Luetaan makefile-tiedostoja...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Luetaan makefile-tiedosto \"%s\""
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr ""
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (hakupolku)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (ei välitetä)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (ei ~-laajennusta)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "virheellinen syntaksi ehtolauseessa"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "komennot alkavat ennen ensimmäistä kohdetta"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "puuttuva sääntö ennen komentoja"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (ehkä tarkoitit sarkainta eikä kahdeksaa välilyöntiä?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "puuttuva erotin%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "puuttuva kohdehahmo"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "useita kohdehahmoja"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "kohdehahmo ei sisällä %%-merkkiä"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "puuttuva \"endif\""
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "tyhjä muuttujan nimi"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "Ylimääräistä tekstiä \"endef\"-toimintaohjeen jälkeen"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "puuttuva \"endef\", päättämätön \"define\""
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "Ylimääräistä tekstiä \"endef\"-toimintaohjeen jälkeen"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Ylimääräistä tekstiä \"%s\"-toimintaohjeen jälkeen"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "ylimääräinen \"%s\""
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "vain yksi \"else\" ehtolausetta kohden"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Väärin muotoiltu kohdekohtainen muuttujamäärittely"
+
+# skripti?
+#: read.c:1957
+#, fuzzy
+msgid "prerequisites cannot be defined in recipes"
+msgstr "ennakkoehtoja ei voi määritellä komentoskripteissä"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr ""
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr ""
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "kohde \"%s\" ei täsmää kohdehahmon kanssa"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "kohdetiedostolla \"%s\" on sekä :- että ::-merkinnät"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "kohde \"%s\" annettu yli yhden kerran samassa säännössä."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "varoitus: syrjäytetään kohteen \"%s\" komennot"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "varoitus: ei huomioida vanhoja komentoja kohteelle \"%s\""
+
+#: read.c:2229
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr ""
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "varoitus: havaittu NUL-merkki, rivin loppuosaa ei huomioida"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Kohteelle \"%s\" ei tarvitse tehdä mitään."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "\"%s\" on ajan tasalla."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Karsitaan tiedosto \"%s\".\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%1$s\"%3$s\"-kohteen tarvitseman kohteen \"%2$s\" tuottamiseen ei ole sääntöä"
+"%4$s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sKohteen \"%s\" tuottamiseen ei ole sääntöä%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Tarkastellaan tiedostoa \"%s\".\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Tiedoston \"%s\" päivitysyritys epäonnistui äskettäin.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Tiedostoa \"%s\" on jo tarkasteltu.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Päivitetään edelleen tiedostoa \"%s\".\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Tiedosto \"%s\" päivitetty.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Tiedosto \"%s\" ei ole olemassa.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Varoitus: .LOW_RESOLUTION_TIME-tiedostolla \"%s\" on "
+"korkearesoluutioinen aikaleima"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Kohteelle \"%s\" löytyi oletussääntö.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Kohteelle \"%s\" ei löytynyt oletussääntöä.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Käytetään oletuskomentoja kohteelle \"%s\".\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Kehäriippuvuus %s <- %s hylätty."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Kohdetiedoston \"%s\" ennakkoehdot täytetty.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Kohteen \"%s\" ennakkoehtoja täytetään.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Luovutaan kohdetiedostosta \"%s\".\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Kohdetta \"%s\" ei tuotettu uudelleen virheiden vuoksi."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Ennakkoehto \"%s\" on vanhempi kuin kohde \"%s\".\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Kohteen \"%2$s\" ennakkoehto \"%1$s\" ei ole olemassa.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Ennakkoehto \"%s\" on uudempi kuin kohde \"%s\".\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Ennakkoehto \"%s\" on vanhempi kuin kohde \"%s\".\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Tuotetaan \"%s\", koska --always-make -valitsin on käytössä.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Ei tarvetta uudelleentuottaa kohdetta \"%s\""
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; käytetään VPATH-nimeä \"%s\""
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Kohde \"%s\" on tuotettava uudelleen.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ei huomioida VPATH-nimeä \"%s\".\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ""
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Kohdetiedoston \"%s\" uudelleentuottaminen epäonnistui.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Kohdetiedosto \"%s\" uudelleentuotettiin onnistuneesti.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Käytetään oletuskomentoja kohteelle \"%s\".\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Varoitus: Tiedoston \"%s\" muutosaika on tulevaisuudessa"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Varoitus: Tiedoston \"%s\" muutosaika on %.2g sekuntia tulevaisuudessa"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS-elementti \"%s\" ei ole hahmo"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr ""
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Oletussäännöt"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Ei oletussääntöjä."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u oletussääntöä, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr ""
+
+#: rule.c:530
+#, fuzzy, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "VIKA: num_pattern_rules väärä! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "tuntematon signaali"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Linjankatkaisu"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Keskeytys"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Lopetettu"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Virheellinen käsky"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Jäljitys/katkaisupisteansa"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Keskeytetty"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT-ansa"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT-ansa"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Liukulukupoikkeus"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Tapettu"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Väylävirhe"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Muistialueen ylitys"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Virheellinen järjestelmäkutsu"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Katkennut putki"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Herätyskello"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Päätetty"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Käyttäjän määrittelemä signaali 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Käyttäjän määrittelemä signaali 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Lapsi lopetti"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Sähkökatko"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Pysäytetty"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Pysäytetty (päätteen syöte)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Pysäytetty (päätteen tuloste)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Pysäytetty (signaali)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Suoritinaikaraja ylittynyt"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Tiedoston kokoraja ylitetty"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtuaaliajastin vanhentunut"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profilointiajastin vanhentunut"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Ikkuna vaihtunut"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Jatkettu"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Kiireellinen I/O-tilanne"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O mahdollista"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Resurssi menetetty"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Vaarasignaali"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Tietopyyntö"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Käytettävissä ei ole liukulukusuoritinta"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# tilasto tiedostojen hajautustaulusta:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automaattinen"
+
+#: variable.c:1602
+msgid "default"
+msgstr "oletus"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "ympäristö"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "-e:n alainen ympäristö"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "komentorivi"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "\"override\"-toimintaohje"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (tiedostosta \"%s\", rivi %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# muuttujajoukon hajautustaulutilastot:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Muuttujat\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Hahmokohtaisia muuttujien arvoja"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Ei hahmokohtaisia muuttuja-arvoja."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u hahmokohtaista muuttuja-arvoa"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "varoitus: määrittelemätön muuttuja \"%.*s\""
+
+#: vmsfunctions.c:91
+#, fuzzy, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search epäonnistui, arvo %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Varoitus: Tyhjä uudelleenohjaus\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "sisäinen virhe: \"%s\" command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-varoitus, Ctrl-Y-käsittely on ehkä otettava uudelleen käyttöön DCL:stä.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "SISÄÄNRAKENNETTU [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "SISÄÄNRAKENNETTU CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "SISÄÄNRAKENNETTU CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Tuntematon sisäänrakennettu komento \"%s\"\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Virhe, tyhjä komento\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Syöte uudelleenohjattu kohteesta %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Virhetuloste uudelleenohjattu kohteeseen %s\n"
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "Tuloste uudelleenohjattu kohteeseen %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Tuloste uudelleenohjattu kohteeseen %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Käynnistetään sen sijaan %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Virhe käynnistyksessä, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH-hakupolut\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Ei \"vpath\"-hakupolkuja."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u \"vpath\"-hakupolkua.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Ei yleistä (\"VPATH\"-muuttuja) hakupolkua."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Yleinen (\"VPATH\"-muuttuja) hakupolku:\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Virheellinen arvo \"update_status\"-jäsenessä!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Virhe 0x%x (ei huomioida)"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Älä anna -j tai --jobs -valitsinta jos sh.exe ei ole käytettävissä."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Palautetaan make yhden työn tilaan."
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "sisäinen virhe: useitan --jobserver-fds -valitsimia"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sTämä on vapaa ohjelmisto; katso kopiointiehdot lähdekoodista.\n"
+#~ "%sTakuuta EI ole, ei edes KAUPALLISESTI HYVÄKSYTTÄVÄSTÄ LAADUSTA tai\n"
+#~ "%sSOPIVUUDESTA TIETTYYN TARKOITUKSEEN.\n"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "virtuaalimuisti lopussa"
+
+#~ msgid "write error"
+#~ msgstr "kirjoitusvirhe"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "ylimääräinen \"endef\""
+
+#~ msgid "empty `override' directive"
+#~ msgstr "tyhjä \"override\"-toimintaohje"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "virheellinen \"override\"-toimintaohje"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-varoitus, Ctrl-Y jättää aliprosessi(n/t) käyntiin.\n"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "SISÄÄNRAKENNETTU RM %s\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Syntaksivirhe, edelleen \":n sisällä\n"
diff --git a/po/fr.gmo b/po/fr.gmo
new file mode 100644
index 0000000..095850c
--- /dev/null
+++ b/po/fr.gmo
diff --git a/po/fr.po b/po/fr.po
new file mode 100644
index 0000000..287bb62
--- /dev/null
+++ b/po/fr.po
@@ -0,0 +1,2602 @@
+# Messages français pour make.
+# Copyright © 2010 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# 30-juillet-2001, n'avons plus de nouvelle de Marc depuis 5 janvier 1997
+# Marc Baudoin <babafou@ensta.fr>, Frédéric Liné <line@MicroNet.fr>, 1996.
+# Michel Robitaille <robitail@IRO.UMontreal.CA>, 1996-2006
+# Christophe Combelles <ccomb@free.fr>, 2009, 2010
+# Kevin Raymond <shaiton@fedoraproject.org>, 2012, 2013
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-11-01 16:15+0100\n"
+"Last-Translator: Kevin Raymond <shaiton@fedoraproject.org>\n"
+"Language-Team: French <traduc@traduc.org>\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"X-Generator: Poedit 1.5.4\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "tentative d'utiliser une fonctionnalité non prise en charge : « %s »"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "impossible de modifier la date d'un membre d'une archive sur VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch : l'archive « %s » n'existe pas"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch : « %s » n'est pas une archive valide"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch : le membre « %s » n'existe pas dans « %s »"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch : mauvais code de retour de ar_member_touch pour « %s »"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() n'a pas pu extraire les infos du module. Code = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() a échoué avec un code = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+"impossible d'ouvrir la bibliothèque « %s » pour récupérer le membre « %s »"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Membre `%s'%s : %ld octets à %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (le nom peut être tronqué)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Date %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "La recette contient trop de lignes (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Break.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** [%s] le membre « %s » de l'archive peut avoir un problème ; il n'a pas "
+"été supprimé"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** Le membre « %s » de l'archive peut avoir un problème ; il n'a pas été "
+"supprimé"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Suppression du fichier « %s »"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Suppression du fichier « %s »"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  recette à exécuter"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (commande interne) :"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (de « %s », ligne %lu) : \n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Répertoires\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: « stat » impossible.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (clé %s, mtime %d) : ouverture impossible.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (périphérique %d, inode [%d,%d,%d]) : ouverture impossible.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (périphérique %ld, inode %ld) : ouverture impossible.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (périphérique %s, mtime %d) : "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (périphérique %d, inode [%d,%d,%d]) : "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (périphérique %ld, inode %ld) : "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Aucun"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " fichier(s), "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "aucune"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " impossibilité(s)"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " jusqu'ici."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " impossibilités dans %lu répertoires.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "La variable récursive « %s » se référence elle-même (à la fin)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "référence incomplète à une variable"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Une recette a été spécifiée pour le fichier « %s » dans %s : %lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"La recette pour le fichier « %s » a été trouvée par une recherche de règle "
+"implicite,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+"mais « %s » est maintenant considéré comme étant le même fichier que « %s »."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "La recette pour « %s » sera ignorée en faveur de celle pour « %s »."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"impossible de renommer le deux-points simple « %s » en deux-points double "
+"« %s »"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"impossible de renommer le deux-points double « %s » en deux-points simple "
+"« %s »"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Suppression du fichier intermédiaire « %s »"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Suppression des fichiers intermédiaires...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Heure actuelle"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s : horodatage hors limite ; remplacement par %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Pas une cible :"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Fichier précieux (dépendance de .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Cible factice (dépendance de .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Cible de la ligne de commande."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Une valeur par défaut, MAKEFILES ou -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "# Pas de règle interne"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  La recherche de règle implicite a été effectuée."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  La recherche de règle implicite n'a pas été effectuée."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Préfixe de motif implicite ou statique : « %s »\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Le fichier est une dépendance intermédiaire."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Fabrique également :"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Heure de modification jamais vérifiée."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "# Le fichier n'existe pas."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Le fichier est très ancien."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Dernière modification %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Le fichier a été mis à jour."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Le fichier n'a pas été mis à jour."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Recette en cours d'exécution (CECI EST UNE ANOMALIE)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+"#  Recette de dépendances en cours d'exécution (CECI EST UNE ANOMALIE)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Mise à jour réussie."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  À besoin d'être mis à jour (l'option -q est activée)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  N'a pas pu être mis à jour."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Valeur non valable dans le membre « command_state » !"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Fichiers"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# stats des tables de hachage des fichiers :\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s : le champ « %s » n'est pas en cache : %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "le premier argument de la fonction « word » doit être numérique"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "le premier argument de la fonction « word » doit être supérieur à 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "le premier argument de la fonction « wordlist » doit être numérique"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "le deuxième argument de la fonction « wordlist » doit être numérique"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe : DuplicateHandle(In) a échoué (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe : DuplicateHandle(Err) a échoué (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() a échoué (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe() : process_init_fd() a échoué\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Nettoyage du fichier de commandes temporaire %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open : %s : %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "write : %s : %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Fichier d'opérations invalide : %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "nombre d'arguments insuffisant (%d) pour la fonction « %s »"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "non implémenté sur cette plateforme : fonction « %s »"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "appel à la fonction « %s » non terminé : « %c » manquant"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Nom de fonction absent\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Nom de fonction invalide : %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Nom de fonction trop long : %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "nombre d'arguments insuffisant (%d) pour la fonction « %s »\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "nombre d'arguments insuffisant (%d) pour la fonction « %s »\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s : l'option « %s » est ambiguë\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s : l'option « --%s » ne prend pas d'argument\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s : l'option « %c%s » ne prend pas d'argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s : l'option « %s » nécessite un argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s : option non reconnue « --%s »\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s : option non reconnue « %c%s »\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s : option non admise -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s : option incorrecte -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s : l'option nécessite un argument -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s : l'option « -W %s » est ambiguë\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s : l'option « -W %s » ne prend pas d'argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile : expansion de « %s »\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile : évaluation de « %s »\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"impossible d'allouer %lu octets pour la table de hachage : mémoire épuisée"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Charge=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Collisions=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Recherche d'une règle implicite pour « %s ».\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Recherche d'une règle implicite de membre d'archive pour « %s ».\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Évitement de récursion dans une règle implicite.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Motif trop long : « %.*s ».\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Essai du motif avec « %.*s » comme radical.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Rejet d'une dépendance de règle impossible « %s ».\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Rejet d'une dépendance implicite impossible « %s ».\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Essai de la dépendance de règle « %s ».\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Essai de la dépendance implicite « %s ».\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Dépendance trouvée « %s » comme VPATH « %s »\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Recherche d'une règle contenant le fichier intermédaire « %s ».\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Impossible de créer un fichier temporaire\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core dump créé)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignorée)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<commande interne>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s : la recette pour la cible « %s » a échouée"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Erreur %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Erreur 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Attente des tâches non terminées...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Processus fils actif %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (distant)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Récolte du processus fils perdant %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Récolte du processus fils gagnant %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Nettoyage du fichier de commande temporaire %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Le nettoyage du fichier de commandes temporaire %s a échoué (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Retrait du processus fils %p PID %s%s de la chaîne.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "libération de la sémaphore jobserver : erreur (%ld : %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Jeton relâché pour le processus fils %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "écriture vers le serveur de tâches"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() n'a pas pu lancer de processus (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"%d arguments comptés lors du lancement échoué\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Ajout du processus fils %p (%s) PID %s%s à la chaîne.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "attente de la sémaphore ou du processus fils : (erreur %ld : %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Jeton obtenu pour le processus fils %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "lecture du tube des processus"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s : la cible « %s » n'existe pas"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s : mise à jour de la cible « %s » nécessaire pour : %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+"impossible d'imposer des limites de charge sur ce système d'exploitation"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "impossible d'imposer des limites de charge : "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"plus d'identificateur de fichier disponible : impossible de dupliquer stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"plus d'identificateur de fichier disponible : impossible de dupliquer "
+"stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"plus d'identificateurs de fichier disponible : impossible de dupliquer "
+"stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Impossible de restaurer stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Impossible de restaurer stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Impossible de restaurer stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"make a récolté le processus fils pid %s, toujours en attente du pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s : commande introuvable"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s : programme Shell introuvable"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe : l'espace d'environnement est peut-être épuisé"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL a été modifié (de « %s » à « %s »)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Création d'un fichier de commande temporaire %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Contenu du fichier de commande :\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Contenu du fichier Batch :%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (ligne %d) Mauvais contexte du shell (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"-O[TYPE] (--output-sync[=TYPE]) n'est pas configuré pour cette construction."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Echec de l'ouverture de la table des symboles générale : %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "L'objet chargé « %s » n'est pas déclaré compatible avec la GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Echec du chargement du symbole %s à partir de %s : %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Nom du symbole absent pour l'opération « load » : %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Chargement du symbole %s à partir de %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr ""
+"Les opérations « load » ne sont pas prises en charge sur cette plateforme."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Options :\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignoré pour compatibilité.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Fabriquer toutes les cibles sans condition.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C RÉPERTOIRE, --directory=RÉPERTOIRE\n"
+"                              Se placer dans le RÉPERTOIRE avant toute "
+"action.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Afficher beaucoup d'informations de débogage.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAGS]             Afficher divers types d'informations de "
+"débogage.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Les variables d'environment sont prioritaires "
+"sur les makefiles.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=CHAINE               Evaluer la CHAINE comme une instruction de "
+"makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FICHIER, --file=FICHIER, --makefile=FICHIER\n"
+"                              Lire le FICHIER comme un makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Afficher ce message et quitter.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Ignorer les erreurs venant des recettes.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I RÉPERTOIRE, --include-dir=RÉPERTOIRE\n"
+"                              Chercher dans le RÉPERTOIRE les makefiles "
+"traités par inclusion.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Autoriser N tâches simultanées ; nombre infini "
+"si utilisé sans argument.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Poursuivre même si certaines cibles n'ont pas "
+"pu être fabriquées.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Ne pas lancer de tâches multiples à moins que "
+"la charge soit inférieure à N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Utiliser le « mtime » le plus récent entre les "
+"liens symboliques et la cible.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              N'exécuter aucune recette ; seulement les "
+"afficher.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FICHIER, --old-file=FICHIER, --assume-old=FICHIER\n"
+"                              Considérer le FICHIER comme étant très ancien "
+"et ne pas le refabriquer.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronise la sortie des tâches parallèles "
+"par TYPE.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       Afficher la base de données interne de make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Ne pas exécuter de recette ; le code de sortie "
+"indique si la cible est à jour.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Désactiver les règles implicites internes.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Désactiver les réglages des variables "
+"internes.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Ne pas répéter les recettes.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Désactiver -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Assigner l'heure actuelle aux cibles au lieu "
+"de les refabriquer.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Afficher les traces mémoire.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Afficher le numéro de version de make et "
+"quitter.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Afficher le répertoire courant.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Désactiver l'option -w, même si elle a été "
+"activée implicitement.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FICHIER, --what-if=FICHIER, --new-file=FICHIER, --assume-new=FICHIER\n"
+"                              Considérer le FICHIER comme étant toujours "
+"nouveau.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Prévenir lorsqu'une variable non définie est "
+"référencée.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "une chaîne vide n'est pas un nom de fichier valable"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "niveau de débogage inconnu « %s »"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "type de output-sync « %s » inconnu"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+"%s: interception de l'interruption/exception (code = 0x%lx, addr = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filtre d'exception non pris en charge appelé depuis le programme %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Violation d'accès : opération d'écriture à l'adresse 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Violation d'accès : opération de lecture à l'adresse 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() définit default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"La recherche de chemin de find_and_set_shell() a définit default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s s'arrête pendant 30 secondes..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) terminé. On continue.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"erreur interne : impossible d'ouvrir la sémaphore « %s » du jobserver : "
+"(erreur %ld : %s) "
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "client Jobserver (semaphore %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "erreur interne : chaîne --jobserver-fds incorrecte « %s »"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "client Jobserver (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"AVERTISSEMENT : -jN forcé dans un submake : désactivation du mode serveur de "
+"tâches."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "duplication du serveur de tâches"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"avertissement : jobserver n'est pas disponible : utilisation de -j1. Ajouter "
+"« + » à la règle parent du make."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile depuis l'entrée standard spécifié deux fois."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (fichier temporaire)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (fichier temporaire)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+"Les tâches en parallèle (-j) ne sont pas prises en charge sur cette "
+"plateforme."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "On revient en mode monotâche (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Nombre de clients jobserver limités à %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "création de la sémaphore du jobserver : (erreur %ld : %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "création d'un tube pour les tâches"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "initialisation du tube du serveur de tâches"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+"Les liens symboliques ne sont pas pris en charge : désactivation de -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Mise à jour des makefiles....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Le makefile « %s » pourrait boucler ; on ne recommence pas.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Échec de refabrication du makefile « %s »."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Le makefile inclus « %s » est introuvable."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Le makefile « %s » est introuvable"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Impossible de revenir dans le répertoire d'origine."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Réexécution[%u] :"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (fichier temporaire) :"
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL contient plus d'une cible"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Pas de cible spécifiée et aucun makefile n'a été trouvé"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Pas de cible"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Mise à jour des objectifs cibles....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"AVERTISSEMENT : décalage d'horloge détecté. La construction peut être "
+"incomplète."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Utilisation : %s [options] [cible] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Ce programme est construit pour %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Ce programme est construit pour %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Signaler les anomalies à <bug-make@gnu.org>.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "l'option « %s%s » a besoin d'une chaîne non vide comme argument"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "l'option « -%c » prend en argument un entier positif"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sConstruit pour %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sConstruit pour %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicence GPLv3+ : GNU GPL version 3 ou ultérieure <http://gnu.org/licenses/"
+"gpl.html>\n"
+"%sCeci est un logiciel libre : vous êtes autorisé à le modifier et à la "
+"redistribuer.\n"
+"%sIl ne comporte AUCUNE GARANTIE, dans la mesure de ce que permet la loi.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Base de données de Make, imprimée le %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Base de données de Make terminée le %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Erreur inconnue %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s : utilisateur %lu (reél %lu), groupe %lu (réel %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Accès initialisé"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Accès utilisateur"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Accès de Make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Accès des fils"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s : on entre dans un répertoire inconnu\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s : on quitte un répertoire inconnu\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s : on entre dans le répertoire « %s »\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s : on quitte le répertoire « %s »\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u] : on entre dans un répertoire inconnu\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u] : on quitte un répertoire inconnu\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u] : on entre dans le répertoire « %s »\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u] : on quitte le répertoire « %s »\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "erreur d'écriture : %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Arrêt.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s : %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s : %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Lecture des makefiles...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Lecture du makefile « %s »"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (pas d'objectif par défaut)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (chemin de recherche)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (peu importe)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (pas de remplacement du ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "On saute les BOM UTF-8 du makefile « %s »\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "On saute les BOM UTF-8 du tampon makefile\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "syntaxe incorrecte dans la condition"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s : echec du chargement"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "La recette commence avant la première cible"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "règle manquante avant la recette"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (vouliez-vous dire TAB au lieu des 8 espaces ?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "séparateur manquant %s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "motif de cible manquant"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "motifs de cible multiples"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "le motif de cible ne contient pas « %% »"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "« endif » manquant"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nom de variable vide"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "texte superflu après la directive « define »"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "« endef » manquant, « define » non terminé"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "texte superflu après la directive « endef »"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "texte superflu après la directive « %s »"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "« %s » superflu"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "un seul « else » par condition"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Définition malformée de variable spécifique à une cible"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "les prérequis ne peuvent être définis dans des recettes"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "mélange de règles implicites et statiques pour le motif"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "mélange de règles implicites et normales"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "la cible « %s » ne correspond pas au motif de cible"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "le fichier cible « %s » possède à la fois des entrées : et ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "la cible « %s » apparaît plus d'une fois dans la même règle."
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "avertissement : surchargement de la recette pour la cible « %s »"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "avertissement : ancienne recette ignorée pour la cible « %s »"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "mélange de règles implicites et normales"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+"AVERTISSEMENT : caractère NUL détecté ; le reste de la ligne est ignoré"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "rien à faire pour « %s »."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "« %s » est à jour."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Élagage du fichier « %s ».\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%s Aucune règle pour fabriquer la cible « %s », nécessaire pour « %s »%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sAucune règle pour fabriquer la cible « %s »%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Étude du fichier cible « %s ».\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Tentative récente échouée de mettre à jour le fichier « %s ».\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Le fichier « %s » a déjà été étudié.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Mise à jour du fichier « %s » en cours.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Fin de la mise à jour du fichier « %s ».\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Le fichier « %s » n'existe pas.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Avertissement : le fichier .LOW_RESOLUTION_TIME « %s » a un horodatage à "
+"haute résolution"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Règle implicite trouvée pour « %s ».\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Pas de règle implicite trouvée pour « %s ».\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Utilisation de la recette par défaut pour « %s ».\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Dépendance circulaire %s <- %s abandonnée."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Fin des dépendances du fichier cible « %s ».\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Les dépendances de « %s » sont en cours de fabrication.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Abandon du fichier cible « %s ».\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "La cible « %s » n'a pas été refabriquée à cause d'erreurs."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "La dépendance « %s » ne commande que la cible « %s ».\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "La dépendance « %s » de la cible « %s » n'existe pas.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "La dépendance « %s » est plus récente que la cible « %s ».\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "uLa dépendance « %s » est plus ancienne que la cible « %s ».\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "La cible « %s » a un deux-points double et n'a pas de dépendance.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Pas de recette pour « %s » et aucune dépendance n'a changé.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Fabrication de « %s » à cause de l'indicateur « always-make ».\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Inutile de refabriquer la cible « %s »"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr " ; utilisation du nom VPATH « %s »"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Il faut refabriquer la cible « %s ».\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  On ignore le nom VPATH « %s ».\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "La recette de « %s » est en cours d'exécution.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Échec de refabrication du fichier cible « %s ».\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Refabrication réussie du fichier cible « %s ».\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Le fichier cible « %s » a besoin d'être refabriqué avec l'option -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Utilisation des commandes par défaut pour « %s ».\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr ""
+"Avertissement : le fichier « %s » a une date de modification dans le futur"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+"Avertissement : le fichier « %s » a une date de modification %s s dans le "
+"futur"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "l'élément « %s » de .LIBPATTERNS n'est pas un motif"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "« customs » n'exportera pas : %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Règles implicites"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Pas de règle implicite."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u règles implicites, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "ANOMALIE : num_pattern_rules est faux !  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "signal inconnu"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Raccroche"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interrompt"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Quitte"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Instruction non admise"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Point de trace/arrêt"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Annulé"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Appel IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Appel EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Exception en virgule flottante"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Tué"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Erreur de bus"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Erreur de segmentation"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Mauvais appel système"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Tube cassé"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarme"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Terminé"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Signal utilisateur 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Signal utilisateur 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Processus fils terminé"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Coupure d'alimentation"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Arrêté"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Arrêté (entrée tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Arrêté (sortie tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Arrêté (signal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Limite du temps CPU dépassée"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Limite de taille de fichier dépassée"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Compteur virtuel expiré"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Compteur de profiling expiré"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Fenêtre modifiée"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Reprise"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Condition d'E/S urgente"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "E/S possible"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Ressource perdue"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Signal de danger"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Demande d'informations"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Coprocesseur en virgule flottante non disponible"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s pas de tampons strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s strcache utilisé : %lu (%lu) / chaînes = %lu / espace = %lu o / moy = %lu "
+"o\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s tampon courant : taille = %hu o / utilisé = %hu o / nombre = %hu / moy = "
+"%hu o\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s autre utilisé : total = %lu o / nombre = %lu / moy = %lu o\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s autre libre : total = %lu o / max = %lu o / min = %lu o / moy = %hu o\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s performance strcache : lookups = %lu / accès = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# stats des tables de hachage :\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatique"
+
+#: variable.c:1602
+msgid "default"
+msgstr "défaut"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "environnement"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "environnement avec l'option -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "ligne de commande"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "directive « override »"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (depuis « %s », ligne %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# stats des tables de hachage de la variable « set » :\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variables\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Valeurs de variable spécifiques au motif"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# pas de valeurs de variable spécifiques au motif"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u valeurs de variable spécifiques au motif"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "avertissement : variable « %.*s » indéfinie"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() a échoué avec %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "AVERTISSEMENT : redirection vide\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "erreur interne : « %s » command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-warning, vous pourriez avoir besoin de réactiver le traitement de CTRL-Y "
+"par DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "COMMANDE INTERNE [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "COMMANDE CD INTERNE %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "COMMANDE CD INTERNE %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Commande interne inconnue « %s »\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Erreur, commande vide\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Entrée redirigée depuis %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Erreur redirigée vers %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Sortie ajoutée à %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Sortie redirigée vers %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Ajoute %.*s et nettoie\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Exécution de %s à la place\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Erreur de lancement, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Chemins de recherche VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Aucun chemin de recherche « vpath »."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u chemins de recherche « vpath ».\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Aucun chemin de recherche général (variable « VPATH »)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Chemin de recherche général (variable « VPATH ») :\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "erreur interne : options --sync-mutex multiples"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "erreur interne : options --jobserver-fds multiples"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "mémoire virtuelle épuisée"
+
+#~ msgid "write error"
+#~ msgstr "erreur d'écriture"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "COMMANDE RM INTERNE %s\n"
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Valeur non valable dans le membre « update_status » !"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Erreur 0x%x (ignorée)"
+
+#~ msgid "[%s] Error %d (ignored)"
+#~ msgstr "[%s] Erreur %d (ignorée)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr ""
+#~ "Invocation de recette de %s:%lu pour mettre à jour la cible « %s ».\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr ""
+#~ "Invocation de la recette incorporée pour mettre à jour la cible « %s ».\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s nombre de tampons strcache : %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# stats des tables de hachage strcache :\n"
+#~ "# "
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() n'a pas pu lancer de processus (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sCeci est un logiciel libre ; consultez le code source pour connaître "
+#~ "les conditions de copie.\n"
+#~ "%sIl n'y a PAS de garantie ; ni pour une utilisation COMMERCIALE ni pour\n"
+#~ "%sune ADÉQUATION À UN BESOIN PARTICULIER.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "« endef » superflu"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "directive « override » vide"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "directive « override » incorrecte"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-warning, CTRL-Y va laisser des sous-processsus dans la nature.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Ne pas spécifier -j ou --jobs si sh.exe n'est pas disponible."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Réinitialisation de make en mode de traitement simple des tâches."
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Erreur de syntaxe, toujours à l'intérieur de « \" »\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr ""
+#~ "Réception du signal SIGCHLD ; %u processus fils dont le statut de\n"
+#~ "sortie n'a pas été récupé.\n"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "pas de nom de fichier pour « %sinclude »"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "la cible « %s » a laissé un schéma de dépendance vide"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Pas de fichiers."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u fichiers dans %u tables de hachage.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr ""
+#~ "# moyenne de %.3f fichiers par table, maximum de %u fichiers dans une "
+#~ "table.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "RÉPERTOIRE"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "Changer de RÉPERTOIRE avant de faire quoi que ce soit"
+
+#~ msgid "FLAGS"
+#~ msgstr "FANIONS"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Suspension de processus pour permettre au déboggeur de se rattacher"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr ""
+#~ "Les variables d'environnement écrasent celles définies dans les makefiles"
+
+#~ msgid "FILE"
+#~ msgstr "FICHIER"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "Lit FICHIER en tant que makefile"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "Recherche les makefiles inclus dans DIRECTORY"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "N'exécute pas de tâches multiples si la charge dépasse N"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "N'exécute pas les commandes ; elles sont juste affichées"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "Considère FILE comme étant très vieux et ne le refabrique pas"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "N'affiche pas les commandes"
+
+#~ msgid "Turns off -k"
+#~ msgstr "Désactive -k"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "Considère FILE comme étant infiniment récent"
+
+#~ msgid "Entering"
+#~ msgstr "Entre dans"
+
+#~ msgid "Leaving"
+#~ msgstr "Quitte"
+
+#~ msgid "# No variables."
+#~ msgstr "# Pas de variables."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr ""
+#~ "# moyenne de %.1f variables par table, maximum de %u dans une table.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr ""
+#~ "# moyenne de %d.%d variables par table, maximum de %u dans une table.\n"
+
+#~ msgid "Error in lbr$ini_control, %d\n"
+#~ msgstr "Erreur dans lbr$ini_control, %d\n"
+
+#~ msgid "Error looking up module %s in library %s, %d\n"
+#~ msgstr "Erreur en recherchant le module %s dans la bibliothèque %s, %d\n"
+
+#~ msgid "Error getting module info, %d\n"
+#~ msgstr "Erreur lors de l'obtention des informations du module, %d\n"
+
+#~ msgid "touch: "
+#~ msgstr "touch: "
+
+#~ msgid " not"
+#~ msgstr " non"
+
+#~ msgid "#  Last modified %.24s (%0lx)\n"
+#~ msgstr "#  Dernière modification %.24s (%0lx)\n"
+
+#~ msgid "undefined"
+#~ msgstr "indéfini"
+
+#~ msgid "file"
+#~ msgstr "fichier"
+
+#~ msgid "environment override"
+#~ msgstr "écrasement par l'environnement"
+
+#~ msgid "override"
+#~ msgstr "écrasement"
+
+#~ msgid "the `word' function takes a one-origin index argument"
+#~ msgstr "la fonction `word' prend un argument d'index à une seule origine"
+
+#~ msgid "implicit"
+#~ msgstr "dépendance implicite"
+
+#~ msgid "rule"
+#~ msgstr "règle de dépendance"
+
+#~ msgid "Trying %s dependency `%s'.\n"
+#~ msgstr "Essai de la %s `%s'.\n"
+
+#~ msgid "Found dependency as `%s'.%s\n"
+#~ msgstr "Dépendance trouvée en tant que `%s'.%s\n"
+
+#~ msgid "intermediate"
+#~ msgstr "intermédiaire"
+
+#~ msgid "Unknown%s job %d"
+#~ msgstr "Tâche%s inconnue %d"
+
+#~ msgid " remote"
+#~ msgstr " distante"
+
+#~ msgid "%s finished."
+#~ msgstr "%s terminée."
+
+#~ msgid "losing"
+#~ msgstr "perdant"
+
+#~ msgid "winning"
+#~ msgstr "gagnant"
+
+#~ msgid "%sGNU Make version %s"
+#~ msgstr "%sGNU Make version %s"
+
+#~ msgid "Unknown error 12345678901234567890"
+#~ msgstr "Erreur inconnue 12345678901234567890"
+
+#~ msgid "User"
+#~ msgstr "utilisateur"
+
+#~ msgid "Make"
+#~ msgstr "make"
+
+#~ msgid "Child"
+#~ msgstr "enfant"
+
+#~ msgid "Dependency `%s' does not exist.\n"
+#~ msgstr "La dépendance `%s' n'existe pas.\n"
+
+#~ msgid "newer"
+#~ msgstr "plus récente"
+
+#~ msgid "older"
+#~ msgstr "plus ancienne"
+
+#~ msgid "exporting: Couldn't create return socket."
+#~ msgstr "exportation : N'a pas pu créer la socket de retour."
+
+#~ msgid "exporting: "
+#~ msgstr "exportation : "
+
+#~ msgid "exporting: %s"
+#~ msgstr "exportation : %s"
+
+#~ msgid "Job exported to %s ID %u\n"
+#~ msgstr "Tâche exportée vers %s ID %u\n"
+
+#~ msgid "Error getting load average"
+#~ msgstr "Erreur lors de l'obtention de la charge moyenne"
+
+#~ msgid "1-minute: %f  "
+#~ msgstr "1 minute : %f  "
+
+#~ msgid "5-minute: %f  "
+#~ msgstr "5 minutes : %f  "
+
+#~ msgid "15-minute: %f  "
+#~ msgstr "15 minutes : %f  "
+
+#~ msgid "digits occur in two different argv-elements.\n"
+#~ msgstr "des chiffres apparaissent dans deux éléments différents de argv.\n"
+
+#~ msgid "option %c\n"
+#~ msgstr "option %c\n"
+
+#~ msgid "option a\n"
+#~ msgstr "option a\n"
+
+#~ msgid "option b\n"
+#~ msgstr "option b\n"
+
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "option c ayant pour valeur `%s'\n"
+
+#~ msgid "?? getopt returned character code 0%o ??\n"
+#~ msgstr "?? getopt a renvoyé le caractère de code 0%o ??\n"
+
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "éléments de ARGV qui ne sont pas des options : "
+
+#~ msgid "option d with value `%s'\n"
+#~ msgstr "option d ayant pour valeur `%s'\n"
+
+#~ msgid "%s: unknown signal"
+#~ msgstr "%s : signal inconnu"
+
+#~ msgid "Signal 12345678901234567890"
+#~ msgstr "Signal 12345678901234567890"
+
+#~ msgid "Signal %d"
+#~ msgstr "Signal %d"
diff --git a/po/ga.gmo b/po/ga.gmo
new file mode 100644
index 0000000..39e658e
--- /dev/null
+++ b/po/ga.gmo
diff --git a/po/ga.po b/po/ga.po
new file mode 100644
index 0000000..7e865a5
--- /dev/null
+++ b/po/ga.po
@@ -0,0 +1,2323 @@
+# Irish translations for make.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Kevin Patrick Scannell <scannell@SLU.EDU>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.81\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2006-04-22 16:02-0500\n"
+"Last-Translator: Kevin Patrick Scannell <scannell@SLU.EDU>\n"
+"Language-Team: Irish <gaeilge-gnulinux@lists.sourceforge.net>\n"
+"Language: ga\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "rinneadh iarracht ar ghné gan tacaíocht a úsáid: `%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "ní féidir ball cartlainne a `touch'áil ar VMS"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Níl an chartlann `%s' ann"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: Níl `%s' ina cartlann bhailí"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Níl a leithéid de bhall `%s' i `%s'"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Droch-chód aisfhillidh ó ar_member_touch ar `%s'"
+
+#: arscan.c:124
+#, fuzzy, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"níorbh fhéidir le lbr$set_module an t-eolas modúil a bhaint amach, stádas = "
+"%d"
+
+#: arscan.c:230
+#, fuzzy, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "theip ar lbr$ini_control le stádas = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+"ní féidir leabharlann `%s' a oscailt chun cuardach a dhéanamh ar an mball `"
+"%s'"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Ball `%s'%s: %ld beart ag %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (is féidir go bhfuil an t-ainm teasctha)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Dáta %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mód = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Briseadh.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Is féidir gur ball bréige é `%s'; ní scriosadh"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Is féidir gur ball bréige é `%s'; ní scriosadh"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Comhad `%s' á scriosadh"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Comhad `%s' á scriosadh"
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  orduithe le rith"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (insuite):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (ó `%s', líne %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Comhadlanna\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: níorbh fhéidir é a stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (eochair %s, am-m %d): ní féidir é a oscailt.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (gléas %d, i-nód [%d,%d,%d]): ní féidir é a oscailt.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (gléas %ld, i-nód %ld): níorbh fhéidir é a oscailt.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (eochair %s, am-m %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (gléas %d, i-nód [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (gléas %ld, i-nód %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Ná Déan"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " comhad, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "níl"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " rudaí neamhfhéideartha"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " go dtí seo."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " rudaí neamhfhéideartha i %lu comhadlann.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Déanann an athróg athchúrsach `%s' tagairt dó féin (sa deireadh)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "tagairt athróige gan chríochnú"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Sonraíodh orduithe le haghaidh comhaid `%s' ag %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Aimsíodh orduithe le haghaidh `%s' trí chuardach ar rialacha intuigthe,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "ach anois is ionann iad na comhaid `%s' agus `%s'."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Déanfar neamhshuim ar orduithe le haghaidh `%s'; úsáidfear na cinn le "
+"haghaidh `%s' ina n-ionad."
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"ní féidir idirstad aonair `%s' a athainmnigh le hidirstad dúbailte `%s'"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "ní féidir idirstad dúbailte `%s' a athainmniú le hidirstad aonair `%s'"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Comhad idirmheánach `%s' á scriosadh"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Comhaid idirmheánacha á mbaint...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "An t-am anois"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Stampa ama as raon; %s á úsáid ina ionad"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Ní sprioc é:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Comhad luachmhar (réamhriachtanas de .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Sprioc bhréige (réamhriachtanas de .PHONY)."
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  Sprioc líne na n-orduithe."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Makefile réamhshocraithe, nó ó MAKEFILES, nó -include/sinclude."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Níl aon riail intuigthe."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Rinneadh cuardach ar rialacha intuigthe."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Ní dhearna cuardach ar rialacha intuigthe."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Stoc patrúin intuigthe/statach: `%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Tá an comhad ina réamhriachtanas idirmheánach."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Déantar fosta:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Níor seiceáladh an t-am mionathraithe riamh."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Níl a leithéid de chomhad ann."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Is cianaosta an comhad seo."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Athraithe %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Nuashonraíodh an comhad."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Níor nuashonraíodh an comhad."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Tá orduithe ann atá ag rith faoi láthair (IS FABHT É SEO)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Tá orduithe spleáchais ag rith (IS FABHT É SEO)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  D'éirigh leis an nuashonrú."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Tá gá le nuashonrú (-q ceaptha)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Theip ar nuashonrú."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Luach neamhbhailí sa bhall `command_state'!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Comhaid"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# comhaid hais-tábla stait:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "tá an chéad argóint neamhuimhriúil leis an fheidhm `word'"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "caithfidh an chéad argóint leis an fheidhm `word' a bheith deimhneach"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "is neamhuimhriúil í an chéad argóint leis an fheidhm `wordlist'"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "is neamhuimhriúil í an dara hargóint leis an fheidhm `wordlist'"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "create_child_process: theip ar DuplicateHandle(In) (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "create_child_process: theip ar DuplicateHandle(Earr) (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "Theip ar CreatePipe() (e=%ld)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): theip ar process_init_fd()\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Baisc-chomhad sealadach %s á ghlanadh\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "earráid sa scríobh: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "easpa argóintí (%d) d'fheidhm `%s'"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "níl an fheidhm `%s' ar fáil ar an chóras seo"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "glao ar fheidhm `%s' gan chríochnú: `%c' ar iarraidh"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "easpa argóintí (%d) d'fheidhm `%s'"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "easpa argóintí (%d) d'fheidhm `%s'"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: Tá an rogha `%s' débhríoch\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `--%s'\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `%c%s'\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: tá argóint de dhíth i ndiaidh na rogha `%s'\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: rogha anaithnid `--%s'\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: rogha anaithnid `%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: rogha neamhcheadaithe -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: rogha neamhbhailí -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: tá argóint de dhíth i ndiaidh na rogha -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: Tá an rogha `-W %s' débhríoch\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `-W %s'\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, fuzzy, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "ní féidir %ld beart a dháileadh le haghaidh hais-tábla: cuimhne ídithe"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Lód=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Ath-haiseáil=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Tuairteanna haiseála=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Ag déanamh cuardach ar riail intuigthe le haghaidh `%s'.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+"Ag déanamh cuardach ar riail intuigthe le haghaidh bhall cartlainne `%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Athchúrsáil de bharr rialacha intuigthe á seachaint.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Ag baint triail as riail phatrúin le stoc `%.*s'.\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Réamhriachtanas neamhfhéideartha rialach `%s' á dhiúltú.\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Réamhriachtanas intuigthe neamhfhéideartha `%s' á dhiúltú.\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Ag baint triail as an réamhriachtanas rialach `%s'.\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Ag baint triail as an réamhriachtanas intuigthe `%s'.\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Aimsíodh réamhriachtanas `%s' mar VPATH `%s'\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Ag déanamh cuardach ar riail le comhad idirmheánach `%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Ní féidir comhad sealadach a chruthú\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (córdhumpa)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Earráid %d (rinneadh neamhshuim)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (insuite):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Earráid %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Earráid 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Ag fanacht le jabanna neamhchríochnaithe..."
+
+#: job.c:651
+#, fuzzy, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Mac beo 0x%08lx (%s) PID %ld %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (cianda)"
+
+#: job.c:841
+#, fuzzy, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Mac caillteach á bhaint: 0x%08lx PID %ld %s\n"
+
+#: job.c:842
+#, fuzzy, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Mac buaiteach á bhaint: 0x%08lx PID %ld %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Baisc-chomhad sealadach %s á ghlanadh\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Baisc-chomhad sealadach %s á ghlanadh\n"
+
+#: job.c:961
+#, fuzzy, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Mac 0x%08lx PID %ld%s á dhealú ón slabhra.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, fuzzy, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Saoradh ceadchomhartha le haghaidh mac 0x%08lx (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "scríobh jabfhreastalaí"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "theip ar process_easy(); níor tosaíodh próiseas (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"%d argóint sa tosú theipthe\n"
+
+#: job.c:1735
+#, fuzzy, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Ag cur mac 0x%08lx (%s) PID %ld%s ar an slabhra.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, fuzzy, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Fuarthas ceadchomhartha le haghaidh mac 0x%08lx (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "léadh píopa na jabanna"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Níl an chartlann `%s' ann"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+"%sNíl aon riail chun an sprioc `%s' a dhéanamh, riachtanach le haghaidh `"
+"%s'%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "ní féidir srianta lóid a chur i bhfeidhm ar an chóras oibriúcháin seo"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "ní féidir srian lóid a chur i bhfeidhm: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "níl aon hanla comhaid le fáil: níorbh fhéidir stdin a chóipeáil\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "níl aon hanla comhaid le fáil: níorbh fhéidir stdout a chóipeáil\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "níl aon hanla comhaid le fáil: níorbh fhéidir stdin a chóipeáil\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Níorbh fhéidir stdin a athchóiriú\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Níorbh fhéidir stdout a athchóiriú\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Níorbh fhéidir stdin a athchóiriú\n"
+
+#: job.c:2420
+#, fuzzy, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "ghin make mac le pid %ld, ag feitheamh le pid %ld fós\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Ní bhfuarthas an t-ordú"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Ní bhfuarthas an clár blaoisce"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: is féidir gur ídithe í cuimhne na timpeallachta"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "Athraíodh $SHELL (ba `%s' é, agus is `%s' é anois)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Baisc-chomhad sealadach %s á chruthú\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (líne %d) Droch-chomhthéacs blaoisce (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Níl jabanna parailéalacha (-j) ar fáil ar an gcóras seo."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Roghanna:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Déan neamhshuim (comhoiriúnacht)\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Déan gach sprioc, gan choinníollacha.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C COMHADLANN, --directory=COMHADLANN\n"
+"                              Téigh go COMHADLANN roimh dhéanamh aon rud.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Taispeáin go leor eolas dífhabhtaithe.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=BRATACHA]          Taispeáin eolas fabhtaithe de chineálacha "
+"éagsúla.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Sáraíonn athróga timpeallachta makefileanna.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f COMHAD, --file=COMHAD, --makefile=COMHAD\n"
+"                              Léigh COMHAD mar makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Taispeáin an chabhair seo agus scoir.\n"
+
+#: main.c:335
+#, fuzzy
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Déan neamhshuim ar earráidí ó orduithe.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I COMHADLANN, --include-dir=COMHADLANN\n"
+"                              Cuardaigh i gCOMHADLANN ar makefileanna "
+"breise.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Ceadaigh N jab le chéile; éigríoch mura "
+"gceaptar arg.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Lean ar aghaidh fiú nach féidir sprioc a "
+"dhéanamh.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Ná tosaigh jabanna iomadúla mura bhfuil an lód "
+"níos lú ná N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Úsáid an t-am modhnaithe is déanaí, ar an "
+"nasc\n"
+"                                 siombalach nó ar an sprioc.\n"
+
+#: main.c:349
+#, fuzzy
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Ná rith aon ordú; taispeáin torthaí mar dhea "
+"amháin.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o COMHAD, --old-file=COMHAD, --assume-old=COMHAD\n"
+"                              Caith le COMHAD mar cheann cianaosta; ná "
+"hathdhéan é.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       Taispeáin an bunachar sonraí inmheánach.\n"
+
+#: main.c:360
+#, fuzzy
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Ná rith aon ordú; stádas scortha = 0 mura gá "
+"le nuashonrú.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Díchumasaigh na rialacha intuigthe insuite.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  Díchumasaigh na hathróga insuite.\n"
+
+#: main.c:366
+#, fuzzy
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Ná déan macalla ar orduithe.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Múch -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Teagmhaigh spriocanna in ionad iad a "
+"athdhéanamh.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  -d                          Taispeáin go leor eolas dífhabhtaithe.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Taispeáin eolas faoin leagan agus scoir.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Taispeáin an chomhadlann reatha.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Múch -w, fiú má tá sé i bhfeidhm go "
+"hintuigthe.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W COMHAD, --what-if=COMHAD, --new-file=COMHAD, --assume-new=COMHAD\n"
+"                              Caith le COMHAD mar cheann úrnua (go "
+"héigríoch).\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Tabhair rabhadh má dhéantar tagairt d'athróg "
+"gan sainmhíniú.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "ní féidir teaghrán folamh a úsáid mar ainm comhaid"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "sonrú anaithnid `%s' ar an leibhéal dífhabhtaithe"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, fuzzy, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Fuarthas idirbhriseadh/eisceacht (cód = 0x%lx, seoladh = 0x%lx)\n"
+
+#: main.c:835
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Glaodh scagaire eisceachta gan láimhseáil ón chlár %s\n"
+"CódEisceachta = %lx\n"
+"BratachaEisceachta = %lx\n"
+"SeoladhEisceachta = %lx\n"
+
+#: main.c:843
+#, fuzzy, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Sárú rochtana: oibríocht scríofa ag seoladh %lx\n"
+
+#: main.c:844
+#, fuzzy, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Sárú rochtana: oibríocht léimh ag seoladh %lx\n"
+
+#: main.c:920 main.c:935
+#, fuzzy, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "tá find_and_set_shell ag socrú default_shell = %s\n"
+
+#: main.c:988
+#, fuzzy, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "shocraigh find_and_set_shell conair chuardaigh default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "cuirfear %s ar fionraí ar feadh tréimhse 30 soicind..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) críochnaithe. Ag gabháil ar aghaidh.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "earráid inmheánach: teaghrán neamhbhailí --jobserver-fds `%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "rabhadh: -jN fórsáilte i bhfo-make: mód jabfhreastalaí á dhíchumasú."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "jabfhreastalaí dup"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"rabhadh: níl jabfhreastalaí ar fáil: ag baint úsáid as -j1.  Cuir `+' leis "
+"an máthair-riail."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Sonraíodh Makefile ón ionchur caighdeánach faoi dhó."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (comhad sealadach)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (comhad sealadach)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Níl jabanna parailéalacha (-j) ar fáil ar an gcóras seo."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Á athshocrú le haghaidh jabanna aonair (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "píopa na jabanna á chruthú"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "píopa an jabfhreastalaí á thúsú"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "ní thacaítear le naisc shiombalacha: -L á dhíchumasú."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Makefileanna á nuashonrú....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "is féidir go lúbfar an Makefile `%s'; ní athdhéanfar é.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Theip ar athdhéanamh an makefile `%s'."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Níor aimsíodh an makefile `%s' san áireamh."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Níor aimsíodh an makefile `%s'"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Níorbh fhéidir an chomhadlann oibre a athrú ar ais."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Á rith arís[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (comhad sealadach): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr "tá níos mó ná aon sprioc amháin i .DEFAULT_GOAL"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Níor sonraíodh aon sprioc agus níor aimsíodh aon makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Níl aon sprioc ann"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Cinn sprice á nuashonrú....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "rabhadh:  Clog ar sceabha.  Is féidir go bhfuil an tógáil neamhiomlán."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Úsáid: %s [roghanna] [sprioc] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Tógadh an clár seo le haghaidh %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Tógadh an clár seo le haghaidh %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Seol tuairiscí fabhtanna chuig <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "caithfidh tú teaghrán nach folamh a thabhairt mar argóint le `-%c'"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "caithfidh tú slánuimhir dheimhneach a thabhairt mar argóint le `-%c'"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"%sTógadh an clár seo le haghaidh %s\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"%sTógadh an clár seo le haghaidh %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Bunachar sonraí Make, priontáilte ar %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Críochnaíodh an bunachar sonraí Make seo ar %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Earráid anaithnid %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: úsáideoir %lu (fíor %lu), grúpa %lu (fíor %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Rochtain túsaithe"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Rochtain úsáideora"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Rochtain make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Rochtain mic"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Ag dul isteach i gcomhadlann anaithnid\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Ag dul amach as comhadlann anaithnid\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Ag dul isteach sa chomhadlann `%s'\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Ag dul amach as an gcomhadlann `%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Ag dul isteach i gcomhadlann anaithnid\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Ag dul amach as comhadlann anaithnid\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Ag dul isteach sa chomhadlann `%s'\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Ag dul amach as an gcomhadlann `%s'\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "earráid sa scríobh: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Stop.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Makefileanna á léamh...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Makefile `%s' á léamh"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (gan ceann sprice réamhshocraithe)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (conair chuardaigh)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (is cuma)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (ná fairsing ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "comhréir neamhbhailí i gcoinníollach"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "tá orduithe ann roimh an chéad sprioc"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "riail ar iarraidh roimh orduithe"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (Ar mhian leat TÁB in ionad ocht spás?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "deighilteoir%s ar iarraidh"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "patrún sprice ar iarraidh"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "patrúin iomadúla sprice"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "níl aon `%%' sa phatrún sprice"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "`endif' ar iarraidh"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "ainm folamh athróige"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "Téacs gan mhaith i ndiaidh treorach `endef'"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "`endef' ar iarraidh, `define' gan chríochnú"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "Téacs gan mhaith i ndiaidh treorach `endef'"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Téacs gan mhaith i ndiaidh treorach `%s'"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "`%s' breise"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "ní cheadaítear ach aon `else' amháin le gach coinníollach"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Is míchumtha é an sainmhíniú athróige (le haghaidh aon sprioc amháin)"
+
+#: read.c:1957
+#, fuzzy
+msgid "prerequisites cannot be defined in recipes"
+msgstr "ní féidir réamhriachtanais a shonrú i scripteanna ordaithe"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "rialacha intuigthe agus rialacha statacha measctha le chéile"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "rialacha intuigthe agus gnáthrialacha measctha le chéile"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "níl an sprioc `%s' comhoiriúnach leis an phatrún sprice"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "tá iontrálacha : agus :: araon ann don chomhad sprice `%s'"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "tá an sprioc `%s' i riail amháin níos mó ná uair amháin."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "rabhadh: ag sárú na n-orduithe le haghaidh na sprice `%s'"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+"rabhadh: ag déanamh neamhshuim ar sheanorduithe le haghaidh sprice `%s'"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "rialacha intuigthe agus gnáthrialacha measctha le chéile"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+"rabhadh: chonacthas carachtar NUL; ag déanamh neamhshuim ar an chuid eile "
+"den líne"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Níl faic le déanamh i gcomhair `%s'."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "Níl gá le `%s' a nuashonrú."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Comhad `%s' á bhearradh.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%sNíl aon riail chun an sprioc `%s' a dhéanamh, riachtanach le haghaidh `"
+"%s'%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sNíl aon riail chun an sprioc `%s' a dhéanamh%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Comhad sprice `%s' idir lámha.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+"Rinneadh iarracht ar an chomhad `%s' a nuashonrú le déanaí, agus theip air.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Rinneadh scrúdú ar an chomhad `%s' cheana.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Comhad `%s' á nuashonrú fós.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Nuashonraíodh an comhad `%s'.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Níl a leithéid de chomhad `%s' ann.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Warning: comhad .LOW_RESOLUTION_TIME `%s' le stampa ama ardtaifeach"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Aimsíodh riail intuigthe le haghaidh `%s'.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Níor aimsíodh aon riail intuigthe le haghaidh `%s'.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Ag baint úsáid as orduithe réamhshocraithe le haghaidh `%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Tréigeadh an spleáchas ciorclach %s <- %s."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Críochnaíodh na réamhriachtanais den chomhad sprice `%s'.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Réamhriachtanais de `%s' á ndéanamh anois.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Ag tréigean an chomhaid sprice `%s'.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Ní dhearna an sprioc `%s' arís ós rud é go bhfuil earráidí ann."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ""
+"Sonraíonn an réamhriachtanas `%s' ord rite amháin le haghaidh sprice `%s'.\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Níl an réamhriachtanas `%s' den sprioc `%s' ann.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Tá an réamhriachtanas `%s' níos nuaí ná an sprioc `%s'.\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Tá an réamhriachtanas `%s' níos sine ná an sprioc `%s'.\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Tá dhá idirstad ag an sprioc `%s' agus níl aon réamhriachtanas aice.\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+"Níl aon ordú le haghaidh `%s' agus níor athraigh aon réamhriachtanas.\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "`%s' á dhéanamh de bharr bratach --always-make.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Níl gá leis an sprioc `%s' a athdhéanamh"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; ag baint úsáid as ainm VPATH `%s'"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Caithfidh an sprioc `%s' a athdhéanamh.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ag déanamh neamhshuim ar ainm VPATH `%s'.\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Orduithe de `%s' á rith.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Theip ar athdhéanamh an sprioc-chomhaid `%s'.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "D'éirigh le hathdhéanamh an sprioc-chomhaid `%s'.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Tá gá leis an chomhad sprice `%s' a athdhéanamh leis an rogha -q.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Ag baint úsáid as orduithe réamhshocraithe le haghaidh `%s'.\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Rabhadh: Tá an t-am mionathraithe den chomhad `%s' sa todhchaí"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+"Rabhadh: Tá an t-am mionathraithe den chomhad `%s' %.2g soicind sa todhchaí"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Níl eilimint .LIBPATTERNS `%s' ina patrún"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Ní easpórtálfar Customs: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Rialacha Intuigthe"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Níl aon riail intuigthe."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u riail intuigthe, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " teirminéal."
+
+#: rule.c:530
+#, fuzzy, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "FABHT: num_pattern_rules mícheart!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "comhartha anaithnid"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Croch suas"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Idirbhriseadh"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Scoir"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Treoir Neamhcheadaithe"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Rianaigh/brisphointe"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Tobscortha"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Gaiste IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Gaiste EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Eisceacht snámhphointe"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Maraithe"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Busearráid"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Fabht deighilte"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Drochghlao ar an gcóras"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Píopa briste"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Clog aláraim"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Scortha"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Comhartha saincheaptha 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Comhartha saincheaptha 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Scoir an mhacphróiseas"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Cliseadh cumhachta"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Stoptha"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Stoptha (ionchur tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Stoptha (aschur tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Stoptha (comhartha)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Teorainn ama LAP sáraithe"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Uasmhéid na gcomhad sáraithe"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Am fíorúil caite"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Am próifíle caite"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Athraíodh an fhuinneog"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Leanta"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Staid phráinneach A/I"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "A/I indéanta"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Acmhainn caillte"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Comhartha guaise"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Iarratas ar eolas"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Níl comhphróiseálaí snámhphointe ar fáil"
+
+#: strcache.c:236
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr "%s líon na maolán strcache: %d\n"
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr "%s strcache saor: iomlán = %d / uas = %d / íos = %d / meán = %d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s méid strcache: iomlán = %d / uas = %d / íos = %d / meán = %d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr "%s strcache saor: iomlán = %d / uas = %d / íos = %d / meán = %d\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# comhaid hais-tábla stait:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "uathoibríoch"
+
+#: variable.c:1602
+msgid "default"
+msgstr "réamhshocraithe"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "timpeallacht"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "timpeallacht le -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "líne na n-orduithe"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "treoir `override'"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (ó `%s', líne %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# athróg tacar hais-tábla stait:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Athróga\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Luachanna Athróige sainiúil don phatrún"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Níl aon luach athróige atá sainiúil don phatrún."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u luach athróige atá sainiúil don phatrún"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "rabhadh: athróg gan sainmhíniú: `%.*s'"
+
+#: vmsfunctions.c:91
+#, fuzzy, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "Theip ar sys$cuardach le %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Rabhadh: Atreorú folamh\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "earráid inmheánach: `%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-rabhadh, is féidir gur gá duit ionramháil CTRL-Y a athchumasú ó DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "INSUITE [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "CD INSUITE %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "CD INSUITE %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Ordú anaithnid insuite '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Earráid, ordú folamh\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Atreoraíodh ionchur ó %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Atreoraíodh earráidí go %s\n"
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "Atreoraíodh aschur go %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Atreoraíodh aschur go %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "%s á rith ina áit\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Earráid le linn sceitheadh, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH Conairí Cuardaigh\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Níl aon chonair chuardaigh `vpath'."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u conair chuardaigh `vpath'.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Níl aon chonair ghinearálta cuardaigh (athróg `VPATH')."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Conair ghinearálta cuardaigh (athróg `VPATH'):\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Luach neamhbhailí sa bhall `update_status'!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Earráid 0x%x (rinneadh neamhshuim air)"
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "theip ar process_easy(); níor tosaíodh próiseas (e=%ld)\n"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "earráid inmheánach: roghanna --jobserver-fds iomadúla"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sIs saorbhogearra an ríomhchlár seo; féach ar an bhunchód le haghaidh\n"
+#~ "%scoinníollacha cóipeála.  Níl baránta ar bith ann; go fiú níl baránta "
+#~ "ann\n"
+#~ "%sd'INDÍOLTACHT nó FEILIÚNACHT D'FHEIDHM AR LEITH.\n"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "cuimhne fhíorúil ídithe"
+
+#~ msgid "write error"
+#~ msgstr "earráid sa scríobh"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "`endef' breise"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "treoir `override' folamh"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "treoir neamhbhailí `override'"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s # of strings in strcache: %d\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%s líon na dteaghrán i strcache: %d\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-rabhadh, fágfaidh CTRL-Y fo-phróisis gan ghlanadh.\n"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "RM INSUITE %s\n"
diff --git a/po/gl.gmo b/po/gl.gmo
new file mode 100644
index 0000000..209a1a4
--- /dev/null
+++ b/po/gl.gmo
diff --git a/po/gl.po b/po/gl.po
new file mode 100644
index 0000000..254e2a5
--- /dev/null
+++ b/po/gl.po
@@ -0,0 +1,2604 @@
+# Galician translation of GNU make.
+# This file is distributed under the same license as the make package.
+# Copyright (C) 2000, 2002 Free Software Foundation, Inc.
+# Copyright (C) 2012 Leandro Regueiro.
+#
+# Jacobo Tarrio <jtarrio@trasno.net>, 2000, 2002.
+# Leandro Regueiro <leandro.regueiro@gmail.com>, 2012.
+#
+# Proxecto Trasno - Adaptación do software libre á lingua galega:  Se desexas
+# colaborar connosco, podes atopar máis información en http://www.trasno.net
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.82\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2012-11-12 16:40+0100\n"
+"Last-Translator: Leandro Regueiro <leandro.regueiro@gmail.com>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"Language: gl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "tentouse usar unha característica non admitida: «%s»"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "a operación de tocar un membro do arquivo non está dispoñíbel en VMS"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: O arquivo «%s» non existe"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: «%s» non é un arquivo válido"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: O membro «%s» non existe en «%s»"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Código de retorno incorrecto de ar_member_touch en «%s»"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"a chamada a lbr$set_module() fallou ao extraer a información do módulo, "
+"estado = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "a chamada a lbr$ini_control() fallou con estado = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "non é posíbel abrir a biblioteca «%s» para buscar o membro «%s»"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Membro «%s»%s: %ld bytes en %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (o nome pode quedar truncado)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Data %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modo = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Interrompido.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] O membro do arquivo «%s» pode non ser correcto; non eliminado"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** O membro do arquivo «%s» pode non ser correcto; non eliminado"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Eliminando o ficheiro «%s»"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Eliminando o ficheiro «%s»"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr ""
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (incorporadas):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (desde «%s», liña %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Directorios\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: non foi posíbel facer a operación de stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (clave %s, mtime %d): non foi posíbel abrir.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (dispositivo %d, inodo [%d,%d,%d]): non foi posíbel abrir.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (dispositivo %ld, inodo %ld): non foi posíbel abrir.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (clave %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (dispositivo %d, inodo [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (dispositivo %ld, inodo %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Non"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " ficheiros, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "non"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " imposíbeis"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " ata aquí."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " imposíbeis en %lu directorios.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "A variábel recursiva «%s» fai referencia a si mesma (ao final)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "referencia a variábel non rematada"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr ""
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "pero agora considérase que «%s» é o mesmo ficheiro que «%s»."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "non é posíbel renomear «%s» con dous puntos a «%s» con catro puntos"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "non é posíbel renomear «%s» con catro puntos a «%s» con dous puntos"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Eliminando o ficheiro intermedio «%s»"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Retirando os ficheiros intermedios...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Hora actual"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Marca de tempo fóra de rango; substituíndo %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Non é un obxectivo:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Ficheiro precioso (prerrequisito de .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Obxectivo falso (prerrequisito de .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Obxectivo da liña de ordes."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Un ficheiro de make por defecto, MAKEFILES, ou -include/sinclude."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Non hai regras implícitas."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Fíxose a busca de regras implícitas."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Non se fixo a busca de regras implícitas."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Raíz do patrón implícito/estático: «%s»\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  O ficheiro é un prerrequisito intermedio."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Tamén se fai:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Nunca se comprobou o tempo de modificación."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  O ficheiro non existe."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  O ficheiro é moi antigo."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Última modificación: %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  O ficheiro foi actualizado."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  O ficheiro non foi actualizado."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Actualizado con éxito."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Ten que ser actualizado (-q está definido)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Produciuse un erro ao actualizar."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Valor non válido no membro «command_state»!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Ficheiros"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# estatísticas da táboa hash de ficheiros:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "primeiro argumento da función «word» non numérico"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "o primeiro argumento da función «word» debe ser maior que 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "primeiro argumento da función «wordlist» non numérico"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "segundo argumento da función «wordlist» non numérico"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): a chamada a DuplicateHandle(In) fallou (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr ""
+"windows32_open_pipe(): a chamada a DuplicateHandle(Err) fallou (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "A chamada a CreatePipe() fallou (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): a chamada a process_init_fd() fallou\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Limpando o ficheiro de lotes temporal %s\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "erro de escritura: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "número de argumentos insuficiente (%d) na chamada á función «%s»"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "non implementada nesta plataforma: función «%s»"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "chamada á función «%s» non rematada: falta «%c»"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "número de argumentos insuficiente (%d) na chamada á función «%s»"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "número de argumentos insuficiente (%d) na chamada á función «%s»"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: a opción «%s» é ambigua\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: a opción «--%s» non permite ningún argumento\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: a opción «%c%s» non permite ningún argumento\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: a opción «%s» require un argumento\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: opción «--%s» non recoñecida\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: opción «%c%s» non recoñecida\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opción inaceptábel -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: opción incorrecta -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a opción require un argumento -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: a opción «-W %s» é ambigua\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: a opción «-W %s» non permite ningún argumento\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "non se poden reservar %lu bytes para a táboa hash: memoria esgotada"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Carga=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Colisións=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Buscando unha regra implícita para «%s».\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Buscando unha regra implícita membro do arquivo para «%s».\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Evitando a recursión de regras implícitas.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Probando a regra de patrón con raíz «%.*s».\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Rexeitando o prerrequisito imposíbel «%s».\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Rexeitando o prerrequisito implícito imposíbel «%s».\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Probando o prerrequisito «%s».\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Probando o prerrequisito implícito «%s».\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Atopouse a o prerrequisito «%s» como VPATH «%s»\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Buscando unha regra co ficheiro intermedio «%s».\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Non foi posíbel crear un ficheiro temporal\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (memoria envorcada)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignorado)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (incorporadas):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Erro %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Erro 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Agardando por traballos non rematados...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Proceso fillo vivo %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (remoto)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Colleitando o proceso fillo perdedor %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Colleitando o proceso fillo gañador %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Limpando o ficheiro de lotes temporal %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Limpando o ficheiro de lotes temporal %s\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Retirando o proceso fillo %p PID %s%s da cadea.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Liberouse un elemento para o proceso fillo %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr ""
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "produciuse un erro ao iniciar process_easy() o proceso (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Contáronse %d argumentos no inicio que fallou\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Poñendo o proceso fillo %p (%s) PID %s%s na cadea.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Obtívose un elemento para o proceso fillo %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "lectura da canalización de traballos"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: O arquivo «%s» non existe"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%sNon hai unha regra para facer o obxectivo «%s», que precisa «%s»%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "non é posíbel impoñer límites de carga neste sistema operativo"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "non é posíbel impoñer un límite de carga: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"make colleitou un proceso fillo de pid %s, aínda se agarda polo pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Orde non atopada"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Programa para o intérprete de ordes non atopado"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "O valor de $SHELL cambiou (antes era «%s», agora é «%s»)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Creando un ficheiro por lotes temporal %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (liña %d) Contexto do intérprete de ordes incorrecto (!unixy && !"
+"batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Non se admiten os traballos en paralelo (-j) nesta plataforma."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opcións:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignorado por compatibilidade.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Facer todos os obxectivos incondicionalmente.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORIO, --directory=DIRECTORIO\n"
+"                              Cambiar ao DIRECTORIO antes de facer nada.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Mostrar moita información de depuración.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=MODIFICADORES]     Mostrar varios tipos de información de "
+"depuración.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              As variábei de ambiente substitúen aos "
+"makefiles.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FICHEIRO, --file=FICHEIRO, --makefile=FICHEIRO\n"
+"                              Ler o FICHEIRO como makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Mostrar esta mensaxe e saír.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIRECTORIO, --include-dir=DIRECTORIO\n"
+"                              Buscar os makefiles incluídos\n"
+"                                 no DIRECTORIO.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Permitir N traballos á vez; infinitos sen\n"
+"                                 un argumento.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Continuar cando no se poidan facer\n"
+"                                 algúns obxectivos.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Non iniciar varios traballos con carga\n"
+"                                superior a N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:349
+#, fuzzy
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Non executar ningún comando; só amosalos.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FICHEIRO, --old-file=FICHEIRO, --assume-old=FICHEIRO\n"
+"                              Tratar o FICHEIRO como moi antigo e non "
+"refacelo.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       Mostrar a base de datos interna de make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Desactivar as regras implícitas incorporadas.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Desactivar os valores das variábeis "
+"incorporadas.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr ""
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Desactiva -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Tocar os obxectivos no canto de os refacer.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+"  -d                          Mostrar moita información de depuración.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Mostrar o número de versión de make e saír.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Mostrar o directorio actual.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Desactivar -w, incluso se se activou\n"
+"                                 implicitamente.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FICHEIRO, --what-if=FICHEIRO, --new-file=FICHEIRO, --assume-"
+"new=FICHEIRO\n"
+"                              Tratar o FICHEIRO como infinitamente novo.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Avisar cando se faga referencia a\n"
+"                                 unha variábel non definida.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "a cadea baleira non é válida como nome de ficheiro"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "especificación de nivel de depuración descoñecido «%s»"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+"%s: Atrapouse unha Interrupción/Excepción (código = 0x%lx, enderezo = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filtro de excepcións non manexadas chamado desde o programa %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Violación de acceso: operación de escritura no enderezo 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Violación de acceso: operación de lectura no enderezo 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() definindo default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "A busca de rutas de find_and_set_shell() define default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s está suspendido durante 30 segundos..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "rematouse sleep(30). Continuando.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "erro interno: cadea --jobserver-fds non válida «%s»"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"aviso: -jN forzado no submake: desactivando o modo de servidor de traballos."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"aviso: o servidor de traballos non está dispoñíbel: usando -j1. Engada «+» á "
+"regra do make pai."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "O ficheiro de make da entrada estándar especificouse dúas veces."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (ficheiro temporal)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (ficheiro temporal)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Non se admiten os traballos en paralelo (-j) nesta plataforma."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Reiniciando para entrar no modo de traballo único (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "creando a canalización de traballos"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inicializar a canalización do servidor de traballos"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Actualizando os ficheiros de make....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "O ficheiro de make «%s» podería causar un bucle; non se refai.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Produciuse un erro ao refacer o ficheiro de make «%s»."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Non se atopou o ficheiro de make incluído «%s»."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Non se atopou o ficheiro de make «%s»"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Non foi posíbel volver ao directorio orixinal."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Re-executando[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (ficheiro temporal)"
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Non se especificaron obxectivos e non se atopou un ficheiro de make"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Non hai obxectivos"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Actualizando os obxectivos meta....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"aviso: Detectáronse inconsistencias de reloxo. A operación pode quedar "
+"incompleta."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Uso: %s [opcións] [obxectivo] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Este programa compilou para %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Este programa compilou para %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Envíe informes de fallo no programa a <bug-make@gnu.org>.\n"
+"Envíe informes de fallo na tradución a <proxecto@trasno.net>.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "a opción «%s%s» require un argumento de cadea non baleira"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "a opción «-%c» require un argumento integral positivo"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sCompilado para %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sCompilado para %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicenza GPLv3+: GNU GPL versión 3 ou posterior <http://gnu.org/licenses/"
+"gpl.html>\n"
+"%sIsto é software libre: pode modificalo e redistribuílo.\n"
+"%sNon hai NINGUNHA GARANT�A, ata onde o permita a lei.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Base de datos de Make, imprimida en %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Base de datos de Make rematada en %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Erro %d descoñecido"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: usuario %lu (real %lu), grupo %lu (real %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Acceso inicializado"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Acceso de usuario"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Acceso de make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Acceso de fillo"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Entrando nun directorio descoñecido\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Saíndo dun directorio descoñecido\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Entrando no directorio «%s»\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Saíndo do directorio «%s»\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Entrando nun directorio descoñecido\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Saíndo dun directorio descoñecido\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Entrando no directorio «%s»\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Saíndo do directorio «%s»\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "erro de escritura: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Detido.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Lendo os ficheiros de make...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Lendo o ficheiro de make «%s»"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (non hai unha meta por defecto)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (ruta de busca)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (non importa)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (non hai expansión de ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "sintaxe non válida no condicional"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr ""
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr ""
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (quixo dicir TAB no canto de 8 espazos?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "falta un separador%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "falta un patrón obxectivo"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "patróns de obxectivo múltiples"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "o patrón obxectivo non contén «%%»"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "falta «endif»"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nome de variábel baleiro"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "texto superfluo trala directiva «define»"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "falta «endef», «define» sen rematar"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "Texto superfluo trala directiva «endef»"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Texto superfluo trala directiva «%s»"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "«%s» superfluo"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "só un «else» por condicional"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Definición dunha variábel por obxectivo mal formada"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "regras de patrón implícitas e estáticas mesturadas"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "regras implícitas e normais mesturadas"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "o obxectivo «%s» non coincide co patrón do obxectivo"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "o ficheiro obxectivo «%s» ten entradas : e ::"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "o obxectivo «%s» aparece máis dunha vez na mesma regra."
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "regras implícitas e normais mesturadas"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "aviso: viuse un carácter NUL; ignórase o resto da liña"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Non hai nada que facer para «%s»"
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "«%s» está actualizado."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Podando o ficheiro «%s».\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sNon hai unha regra para facer o obxectivo «%s», que precisa «%s»%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sNon hai unha regra para facer o obxectivo «%s»%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Considerando o ficheiro obxectivo «%s».\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+"Hai pouco probouse a actualizar o ficheiro «%s» e non foi posíbel facelo.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "O ficheiro «%s» xa fora considerado.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Aínda se está actualizando o ficheiro «%s».\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Rematouse de actualizar o ficheiro «%s».\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "O ficheiro «%s» non existe.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Aviso: o ficheiro «%s» de .LOW_RESOLUTION_TIME ten unha marca de tempo "
+"de alta resolución"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Atopouse unha regra implícita de «%s».\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Non se atopou unha regra implícita para «%s».\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Usando as ordes por defecto para «%s».\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "A dependencia circular %s <- %s foi eliminada."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Rematáronse os prerrequisitos do ficheiro obxectivo «%s».\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Están a se facer os prerrequisitos de «%s».\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Abandonando no ficheiro obxectivo «%s».\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Non se refai o obxectivo «%s» a causa dos erros."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "O prerrequisito «%s» é só-orde para o obxectivo «%s».\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "O prerrequisito «%s» do obxectivo «%s» non existe.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "O prerrequisito «%s» é máis novo que o obxectivo «%s».\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "O prerrequisito «%s» é máis vello que o obxectivo «%s».\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "O obxectivo «%s» ten catro puntos e non ten prerrequisitos.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Facendo «%s» debido á marca de sempre-facer.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Non é preciso refacer o obxectivo «%s»"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; usando o nome de VPATH «%s»"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Debe refacerse o obxectivo «%s».\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ignorando o nome VPATH «%s».\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ""
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Produciuse un erro ao refacer o ficheiro obxectivo «%s».\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "O ficheiro obxectivo «%s» foi feito de novo con éxito.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "O ficheiro obxectivo «%s» precisa refacerse con -q.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Usando as ordes por defecto para «%s».\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Aviso: O ficheiro «%s» ten un tempo de modificación no futuro"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Aviso: O ficheiro «%s» ten un tempo de modificación %s seg no futuro"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "O elemento de .LIBPATTERNS «%s» non é un patrón"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "A Aduana non exporta: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Regras implícitas"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Non hai regras implícitas."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u regras implícitas, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "FALLO: num_pattern_rules é incorrecto! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "sinal descoñecido"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Colgar"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interrompido"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Saír"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Instrución inaceptábel"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Trampa de trazado/punto de detención"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Abortado"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Trampa de IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Trampa EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Excepción de coma flotante"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Matado"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Erro do bus"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Fallo de segmento"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Chamada ao sistema incorrecta"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Canalización rota"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Temporizador"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Terminado"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Sinal definido polo usuario 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Sinal definido polo usuario 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "O proceso fillo saíu"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Fallo de subministración eléctrica"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Detido"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Detido (entrada de consola)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Detido (saída de consola)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Detido (sinal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Excedeuse o límite de tempo de CPU"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Excedeuse o límite de tamaño do ficheiro"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Temporizador virtual esgotado"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr ""
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "A xanela cambiou"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Continuado"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Condición de E/S urxente"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "A E/S é posíbel"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Recurso perdido"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Sinal de perigo"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Petición de información"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "O coprocesador de coma flotante non está dispoñíbel"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# estatísticas da táboa hash de ficheiros:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automático"
+
+#: variable.c:1602
+msgid "default"
+msgstr "por defecto"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "ambiente"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "ficheiro de make"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "ambiente baixo -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "liña de ordes"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "directiva «override»"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (desde «%s», liña %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# estatísticas da táboa hash de conxunto de variábeis:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variábeis\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Valores de variábeis específicas do patrón"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Non hai valores específicos do patrón."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u valores de variábeis específicos do patrón"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "aviso: variábel non definida «%.*s»"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "a chamada a sys$search() fallou con %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Aviso: Redirección baleira\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "erro interno: «%s» command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-aviso, pode que teña que reactivar o manexo de CTRL-Y desde o DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Orde incorporada descoñecida «%s»\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Erro, orde baleira\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Entrada redirixida desde %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Erros redirixidos a %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Saída redirixida a %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Executando %s no canto\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Erro ao lanzar, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Rutas de busca VPATH\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Non hai rutas de busca «vpath»"
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u rutas de busca «vpath».\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Non hai unha ruta de busca xeral (variábel «VPATH»)."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Ruta de busca xeral (variábel «VPATH»):\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Valor non válido no membro «update_status»!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Erro 0x%x (ignorado)"
+
+#~ msgid "[%s] Error %d (ignored)"
+#~ msgstr "[%s] Erro %d (ignorado)"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "erro interno: opcións --jobserver-fds múltiples"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "memoria virtual esgotada"
+
+#~ msgid "write error"
+#~ msgstr "erro de escritura"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# estatísticas da táboa hash strcache:\n"
+#~ "# "
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "create_child_process: DuplicateHandle(In) failed (e=%d)\n"
+#~ msgstr ""
+#~ "create_child_process: a chamada a DuplicateHandle(In) fallou (e=%d)\n"
+
+#~ msgid "create_child_process: DuplicateHandle(Err) failed (e=%d)\n"
+#~ msgstr ""
+#~ "create_child_process: a chamada a DuplicateHandle(Err) fallou (e=%d)\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Erro de sintaxe, ainda dentro de '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Recibiuse un sinal SIGCHLD; %u procesos fillos non colleitados.\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-aviso, CTRL-Y deixará subprocesos ceibos.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Non especifique -j ou --jobs se sh.exe non está dispoñible."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Reiniciando make para entrar no modo de un traballo."
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sIsto é software libre; vexa o código fonte polas condicións de copia.\n"
+#~ "%sNON hai garantía; nin sequera de COMERCIABILIDADE ou APTITUDE PARA\n"
+#~ "%sUN FIN DETERMINADO.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "`endef' superfluo"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "directiva `override' baleira"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "directiva `override' non válida"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "non hai un home de ficheiro en `%sinclude'"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "o obxectivo `%s' deixa o patrón prerrequisito baleiro"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Non hai ficheiros."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u ficheiros en %u baldes hash.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr ""
+#~ "# %.3f ficheiros de media por balde, máximo de %u ficheiros nun balde.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DIRECTORIO"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "Entrar no DIRECTORIO antes de facer nada"
+
+#~ msgid "FLAGS"
+#~ msgstr "MODIFICADORES"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Suspende-lo proceso para poder conectar un depurador"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr ""
+#~ "As variables de ambiente teñen prioridade sobre os ficheiros de make"
+
+#~ msgid "FILE"
+#~ msgstr "FICHEIRO"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "Le-lo FICHEIRO coma un ficheiro de make"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "Busca-los ficheiros de make incluidos no DIRECTORIO"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "Non comezar traballos múltiples se a carga non é inferior a N"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "Non executar ningún comando; só amosalos"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "Considerar que o FICHEIRO é moi vello, e non o refacer"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "Non amosa-los comandos"
+
+#~ msgid "Turns off -k"
+#~ msgstr "Desactiva -k"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "Considerar que o FICHEIRO é infinitamente novo"
+
+#~ msgid "Entering"
+#~ msgstr "Entrando"
+
+#~ msgid "Leaving"
+#~ msgstr "Saindo"
+
+#~ msgid "# No variables."
+#~ msgstr "# Non hai variables."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# %.1f variables de media por balde, máximo de %u nun balde.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# %d.%d variables de media por balde, máximo de %u nun balde.\n"
+
+#~ msgid "the `word' function takes a positive index argument"
+#~ msgstr "a función `word' toma un argumento índice positivo"
+
+#~ msgid " not"
+#~ msgstr " non"
+
+#~ msgid " remote"
+#~ msgstr " remoto"
+
+#~ msgid " with arg %s"
+#~ msgstr " co argumento %s"
+
+#~ msgid "%s finished."
+#~ msgstr "%s rematou."
+
+#~ msgid "%s: unknown signal"
+#~ msgstr "%s: sinal descoñecido"
+
+#~ msgid "%sGNU Make version %s"
+#~ msgstr "%sGNU Make versión %s"
+
+#~ msgid "1-minute: %f  "
+#~ msgstr "1 minuto: %f  "
+
+#~ msgid "15-minute: %f  "
+#~ msgstr "15 minutos: %f  "
+
+#~ msgid "5-minute: %f  "
+#~ msgstr "5 minutos: %f  "
+
+#~ msgid "?? getopt returned character code 0%o ??\n"
+#~ msgstr "?? getopt devolveu o código do carácter 0%o ??\n"
+
+#~ msgid "Child"
+#~ msgstr "Fillo"
+
+#~ msgid "Dependency `%s' does not exist.\n"
+#~ msgstr "A dependencia `%s' non existe.\n"
+
+#~ msgid "Error %ld"
+#~ msgstr "Erro %ld"
+
+#~ msgid "Error getting load average"
+#~ msgstr "Erro ao obte-la carga media"
+
+#~ msgid "Error mallocing for FAB\n"
+#~ msgstr "Erro ao reservar memoria para FAB\n"
+
+#~ msgid "Error mallocing for NAM\n"
+#~ msgstr "Erro ao reservar memoria para NAM\n"
+
+#~ msgid "Error mallocing for direct\n"
+#~ msgstr "Erro ao reservar memoria para direct\n"
+
+#~ msgid "Error mallocing for searchspec\n"
+#~ msgstr "Erro ao reservar memoria para searchspec\n"
+
+#~ msgid "ExceptionAddress = %x\\r\n"
+#~ msgstr "ExceptionAddress = %x\\r\n"
+
+#~ msgid "ExceptionCode = %x\\r\n"
+#~ msgstr "ExceptionCode = %s\\r\n"
+
+#~ msgid "ExceptionFlags = %x\\r\n"
+#~ msgstr "ExceptionFlags = %x\\r\n"
+
+#~ msgid "Job exported to %s ID %u\n"
+#~ msgstr "Traballo exportado a %s ID %u\n"
+
+#~ msgid "MyExecute: Cannot allocate space for calling a command"
+#~ msgstr "MyExecute: Non se pode reservar espacio para chamar un comando"
+
+#~ msgid "Trying %s dependency `%s'.\n"
+#~ msgstr "Probando a dependencia %s `%s'.\n"
+
+#~ msgid "Unknown error 12345678901234567890"
+#~ msgstr "Erro 12345678901234567890 descoñecido"
+
+#~ msgid "Unknown%s job %d"
+#~ msgstr "Traballo%s %d descoñecido"
+
+#~ msgid "User"
+#~ msgstr "Usuario"
+
+#~ msgid "arg with white space or doublequotes: %s\n"
+#~ msgstr "argumento con espacios en branco ou comiñas dobres: %s\n"
+
+#~ msgid "digits occur in two different argv-elements.\n"
+#~ msgstr "aparecen díxitos en dous elementos de argv distintos.\n"
+
+#~ msgid "empty string arg: %s\n"
+#~ msgstr "argumento de cadea baleiro: %s\n"
+
+#~ msgid "environment override"
+#~ msgstr "supli-lo ambiente"
+
+#~ msgid "execve: "
+#~ msgstr "execve: "
+
+#~ msgid "execvp: "
+#~ msgstr "execvp: "
+
+#~ msgid "expand_function: unable to launch process (e=%d)\n"
+#~ msgstr "expand_function: non se puido lanza-lo proceso (e=%d)\n"
+
+#~ msgid "exporting: "
+#~ msgstr "exportando: "
+
+#~ msgid "exporting: %s"
+#~ msgstr "exportando: %s"
+
+#~ msgid "exporting: Couldn't create return socket."
+#~ msgstr "exportando: Non se puido crea-lo socket de retorno."
+
+#~ msgid "getcwd: "
+#~ msgstr "getcwd: "
+
+#~ msgid "getwd: %s"
+#~ msgstr "getwd: %s"
+
+#~ msgid "implicit"
+#~ msgstr "implícita"
+
+#~ msgid "intermediate"
+#~ msgstr "intermedia"
+
+#~ msgid "losing"
+#~ msgstr "que perde"
+
+#~ msgid "never"
+#~ msgstr "nunca"
+
+#~ msgid "newer"
+#~ msgstr "máis novo"
+
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "elementos ARGV que non son opcións: "
+
+#~ msgid "older"
+#~ msgstr "máis vello"
+
+#~ msgid "option %c\n"
+#~ msgstr "opción %c\n"
+
+#~ msgid "option %s"
+#~ msgstr "opción %s"
+
+#~ msgid "option a\n"
+#~ msgstr "opción a\n"
+
+#~ msgid "option b\n"
+#~ msgstr "opción b\n"
+
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "opción c co valor `%s'\n"
+
+#~ msgid "option d with value `%s'\n"
+#~ msgstr "opción d co valor `%s'\n"
+
+#~ msgid "original arg: %s\n"
+#~ msgstr "argumento orixinal: %s\n"
+
+#~ msgid "override"
+#~ msgstr "suplir"
+
+#~ msgid "plain arg: %s\n"
+#~ msgstr "argumento simple: %s\n"
+
+#~ msgid "process_begin: CreateProcess(%s, %s, ...) failed.\n"
+#~ msgstr "process_begin: a chamada a CreateProcess(%s, %s, ...) fallou.\n"
+
+#~ msgid "process_easy: DuplicateHandle(Out) failed (e=%d)\n"
+#~ msgstr "process_easy: a chamada a DuplicateHandle(Out) fallou (e=%d)\n"
+
+#~ msgid "read"
+#~ msgstr "lectura"
+
+#~ msgid "rule"
+#~ msgstr "regra"
+
+#~ msgid "touch %s"
+#~ msgstr "tocar %s"
+
+#~ msgid "undefined"
+#~ msgstr "non definido"
+
+#~ msgid "unlink: "
+#~ msgstr "unlink: "
+
+#~ msgid "winning"
+#~ msgstr "que gaña"
+
+#~ msgid "write"
+#~ msgstr "escritura"
diff --git a/po/he.gmo b/po/he.gmo
new file mode 100644
index 0000000..0603509
--- /dev/null
+++ b/po/he.gmo
diff --git a/po/he.po b/po/he.po
new file mode 100644
index 0000000..0de9871
--- /dev/null
+++ b/po/he.po
@@ -0,0 +1,2362 @@
+# Hebrew messages for GNU Make
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# Eli Zaretskii <eliz@is.elta.co.il>, 2002.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.79.1\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2002-03-30 21:33+0300\n"
+"Last-Translator: Eli Zaretskii <eliz@gnu.org>\n"
+"Language-Team: Hebrew <eliz@gnu.org>\n"
+"Language: he\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "úëîúð äððéàù `%s' äðåëúá ùåîéù ïåéñð"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "VMS úëøòîá ïåéëøàá øáà ìù äòù/êéøàú éåðéùá äëéîú ïéà"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "íéé÷ åðéà `%s' ïåéëøà õáå÷ :touch"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "ïé÷ú ïåéëøà õáå÷ åðéà `%s' :touch"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "`%s' øáà ìéëî åðéà `%s' ïåéëøà :touch"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "`%s' øåáò ïé÷ú-àì ãå÷ äøéæçä ar_member_touch :touch"
+
+#: arscan.c:124
+#, fuzzy, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "%d ñåèèñ ,lib$rset_module é\"ò ìåãåî ìò òãéî úôéìùá ïåìùë"
+
+#: arscan.c:230
+#, fuzzy, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "%d ñåèèñ íò ìùëð lbr$ini_control"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "(`%s' äéøôñ) `%s' øáà øåáò äéøôñ úçéúôá äì÷ú"
+
+#  These are not translated, since they belong to a test program.
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Member `%s'%s: %ld bytes at %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (name might be truncated)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Date %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Break. ***\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] ÷çîéé àì ;ïé÷ú-éúìá úåéäì ìåìò `%s' ïåéëøà øáà ***"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** ÷çîéé àì ;ïé÷ú-éúìá úåéäì ìåìò `%s' ïåéëøà øáà ***"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] `%s' õáå÷ ÷çåî ***"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** `%s' õáå÷ ÷çåî ***"
+
+#  I decided to retain the English text of what Make prints under -p,
+#  since it is notoriously hard to get right in right-to-left languages,
+#  and because its primary use is for programmers who write Makefiles.
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  commands to execute"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (built-in):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (from `%s', line %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Directories\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: could not be stat'd.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (key %s, mtime %d): could not be opened.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (device %ld, inode %ld): could not be opened.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (key %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (device %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (device %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "No"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " files, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "no"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " impossibilities"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " so far."
+
+#: dir.c:1085
+#, fuzzy, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " impossibilities in %u directories.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "(øáã ìù åôåñá) åîöòì äééðôäì íøåâ `%s' éáéñøå÷ø äðúùî"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "äëìäë úîééúñî äðéà äðúùîì äééðôä"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr ",`%s' õáå÷ øåáò úåãå÷ô åðúéð %s õáå÷á %lu äøåùá"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ",íéùøåôî-éúìá íéììëá ùåôéç é\"ò åàöîð `%s' õáå÷ øåáò úåãå÷ô"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ".õáå÷ åúåàì äúò íéáùçð `%s' ïäå `%s' ïä íìåàå"
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ".`%s' øåáò åìà ìò úåôéãò `%s' øåáò úåãå÷ô"
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "`%s' íéããåá íééúåãå÷ðî `%s' íéìåôë íééúåãå÷ðì êåôäì ïúéð àì"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "`%s' íéìåôë íééúåãå÷ðî `%s' íéããåá íééúåãå÷ðì êåôäì ïúéð àì"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** `%s' íééðéá õáå÷ ÷çåî ***"
+
+#: file.c:405
+#, fuzzy
+msgid "Removing intermediate files...\n"
+msgstr "*** `%s' íééðéá õáå÷ ÷çåî ***"
+
+#: file.c:811
+msgid "Current time"
+msgstr "úëøòî ïåòù"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "øúåîä íåçúì õåçî äðéäù ,%s ìù ïîæä úîéúç úà %s-á óéìçî"
+
+#  See the comment above about translations of text printed under -p.
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Not a target:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Precious file (prerequisite of .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Phony target (prerequisite of .PHONY)."
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  Command-line target."
+
+#: file.c:966
+#, fuzzy
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  A default or MAKEFILES makefile."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# No implicit rules."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Implicit rule search has been done."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Implicit rule search has not been done."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Implicit/static pattern stem: `%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  File is an intermediate prerequisite."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Also makes:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Modification time never checked."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  File does not exist."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  File is very old."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Last modified %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  File has been updated."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  File has not been updated."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Commands currently running (THIS IS A BUG)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Dependencies commands running (THIS IS A BUG)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Successfully updated."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Needs to be updated (-q is set)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Failed to be updated."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Invalid value in `command_state' member!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Files"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "øôñî åðéà `word' úééö÷ðåôì ïåùàø èðîåâøà"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "éáåéç úåéäì áééç `word' úééö÷ðåôì ïåùàø èðîåâøà"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "øôñî åðéà `wordlist' úééö÷ðåôì ïåùàø èðîåâøà"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "øôñî åðéà `wordlist' úééö÷ðåôì éðù èðîåâøà"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(In) failed (e=%d)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(Err) failed (e=%d)\n"
+
+#: function.c:1530
+#, fuzzy, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() failed (e=%d)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): process_init_fd() failed\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "`%s' éðîæ batch õáå÷ ÷ìñî\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr ""
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr ""
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "÷ôñî åðéàù (%d) íéèðîåâøà øôñî íò äàø÷ð `%s' äéö÷ðåô"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "åæ úëøòîá úùîåîî äðéà `%s' äéö÷ðåô"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "`%s' äéö÷ðåôì äàéø÷á `%c' øñç"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "÷ôñî åðéàù (%d) íéèðîåâøà øôñî íò äàø÷ð `%s' äéö÷ðåô"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "÷ôñî åðéàù (%d) íéèðîåâøà øôñî íò äàø÷ð `%s' äéö÷ðåô"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s úéðëú øåáò éòîùî-ãç åðéà `%s' ïééôàî\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `--%s' ïééôàî\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `%c%s' ïééôàî\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s úéðëú øåáò èðîåâøà áééçî `%s' ïééôàî\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s úéðëú øåáò `--%s' ääåæî-éúìá ïééôàî\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s úéðëú øåáò `%c%s' ääåæî-éúìá ïééôàî\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: é÷åç-éúìá ïééôàî -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s úéðëú øåáò éåâù ïééôàî -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: èðîåâøà áééçî ïééôàî -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s úéðëú øåáò éòîùî-ãç åðéà `-W %s' ïééôàî\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `-W %s' ïééôàî\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr ""
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr ""
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr ""
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr ".`%s' øåáò ùøåôî-éúìá ììë ùôçî\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ".`%s' øåáò ïåéëøà éøáàì ùøåôî-éúìá ììë ùôçî\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr ".úùøåôî-éúìá äéñøå÷øî òðîð\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr ".`%.*s' ùøåù íò úéðáú ììë äñðî\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr ".úéøùôà-éúìá äðéäù íåùî `%s' íã÷ úùéøã äçåã\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr ".úéøùôà-éúìá äðéäù íåùî `%s' úùøåôî-éúìá íã÷ úùéøã äçåã\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr ".`%s' íã÷ úùéøã ììë äñðî\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr ".`%s' úùøåôî-éúìá íã÷ úùéøã äñðî\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "`%s' íã÷ úùéøãë VPATH `%s' éúàöî\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr ".`%s' éðîæ õáå÷ íò ììë ùôçî\n"
+
+#: job.c:361
+#, fuzzy
+msgid "Cannot create a temporary file\n"
+msgstr "fwrite (temporary file)"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core õáå÷á íùøð ïåøëæä ïëåú)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] %d äì÷úî éúîìòúä"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (built-in):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] %d äì÷ú"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] 0x%x äì÷ú ***"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr ""
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** ...åîééúñð íøèù úåãåáòì ïéúîî"
+
+#: job.c:651
+#, fuzzy, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "äöø 0x%08lx (%s) PID=%ld %s úá-úéðëú\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr "(ú÷çåøî)"
+
+#: job.c:841
+#, fuzzy, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "äìùëðù 0x%08lx PID=%ld %s úá-úéðëú óñåà\n"
+
+#: job.c:842
+#, fuzzy, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "äçéìöäù 0x%08lx PID=%ld %s úá-úéðëú óñåà\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "`%s' éðîæ batch õáå÷ ÷ìñî\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "`%s' éðîæ batch õáå÷ ÷ìñî\n"
+
+#: job.c:961
+#, fuzzy, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ".úåãåáò úøùøùî 0x%08lx PID=%ld %s úá-úéðëú ÷éçøî\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, fuzzy, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ".øøçåù 0x%08lx (%s) úá-úéðëú øåáò ïåîéñàä\n"
+
+#  Here and elsewhere leading strings passed to perror are not translated,
+#  since they will be followed by an error message in English.
+#: job.c:1036
+msgid "write jobserver"
+msgstr "write jobserver"
+
+#: job.c:1662 job.c:2387
+#, fuzzy, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "(e=%d) úéðëú-úú øåâéùá ìùëð process_easy()\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"ìùëðù øåâéùá åðîð íéèðîåâøà %d\n"
+
+#: job.c:1735
+#, fuzzy, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ".úåãåáò úøùøùì 0x%08lx (%s) PID=%ld %s úá-úéðëú óøöî\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, fuzzy, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ".0x%08lx (%s) úá-úéðëú øåáò ïåîéñà ìá÷úä\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "read jobs pipe"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "íéé÷ åðéà `%s' ïåéëøà õáå÷ :touch"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%säúééðáì íéììë ïéà êà ,`%s' úùøåã `%s'%s äøèî"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "åæ úëøòîá ñîåò úåìáâî úåôëì ïúéð àì"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "cannot enforce load limit: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2420
+#, fuzzy, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "äôñàð pid %d úá-úéðëú ,pid %d-ì äëçî ïééãò\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "äàöîð àì åæ äãå÷ô :%s"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "äàöîð àì shell úãå÷ô :%s"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "(`%s' äéä íãå÷ ,`%s' åéùëò) äðúùä $SHELL ìù åëøò"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "`%s' éðîæ batch õáå÷ øöåé\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"(!unixy && !batch_mode_shell) shell-mode úòéá÷á äì÷ú :%s õáå÷ ìù %d äøåù\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr ".åæ úëøòîá êîúð åðéà (-j) éìéá÷î òåöéá"
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "                                             :íéðééôàî\n"
+
+#: main.c:314
+#, fuzzy
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "úåîéàú ïòîì èîùåî"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+
+#: main.c:321
+#, fuzzy
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "úåàéâù éåôéð úáåèì òãéî ìù òôù âöä"
+
+#: main.c:323
+#, fuzzy
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr "úåàéâù éåôéð úáåèì òãéî ìù íéðåù íéâåñ âöä"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+
+#: main.c:333
+#, fuzzy
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "úéðëúäî àöå äæ äøæò êñî âöä"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+
+#: main.c:340
+#, fuzzy
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr "äìáâî ïéà èðîåâøà àìì ;úéðîæ-åá úåãåáò N-î øúåé àì"
+
+#: main.c:342
+#, fuzzy
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr "äéðáì úåðúéð ïðéà úåøèîäî äîë íà åìéôà êùîä"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+#, fuzzy
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "Make ìù éîéðô íéðåúð ñéñá âöä"
+
+#: main.c:360
+#, fuzzy
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr "úðëãåòî äøèî íàá øîåà äàéöé ãå÷ ;úåãå÷ô õéøú ìà"
+
+#: main.c:362
+#, fuzzy
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "íéùøåôî-éúìá íéðáåî íéììë ìøèð"
+
+#: main.c:364
+#, fuzzy
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "íéðúùî ìù úåðáåî úåøãâä ìøèð"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr ""
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+
+#: main.c:371
+#, fuzzy
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "ïúåðáì íå÷îá úåøèî ìù ïîæ úîéúç ïëãò"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+
+#: main.c:375
+#, fuzzy
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "úéðëúäî àöå Make ìù àñøéâ øôñî âöä"
+
+#: main.c:377
+#, fuzzy
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "úéçëåð äé÷éú íù âöä"
+
+#: main.c:379
+#, fuzzy
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr "ùøåôîá ïéåö àåä íà åìéôà -w ìèá"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+
+#: main.c:384
+#, fuzzy
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr "øãâåä àìù äðúùîì äééðôä äø÷îá äøäæà âöä"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "õáå÷ íùë úìá÷úî äðéà ä÷éø úæåøçî"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "úåàéâù éåôéðì òãéî ìù `%s' øëåî-éúìá ïééôàî"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, fuzzy, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s úéðëúá (code = 0x%x, addr = 0x%x) äâéøç åà ä÷éñô\n"
+
+#: main.c:835
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"%s úéðëú êåúî àø÷ð ìåôéè àìì úåâéøç ïðñî\n"
+"ExceptionCode = %x\n"
+"ExceptionFlags = %x\n"
+"ExceptionAddress = %x\n"
+
+#: main.c:843
+#, fuzzy, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "%x úáåúëì äáéúë :ïåøëæì äùéâ úì÷ú\n"
+
+#: main.c:844
+#, fuzzy, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "%x úáåúëî äàéø÷ :ïåøëæì äùéâ úì÷ú\n"
+
+#: main.c:920 main.c:935
+#, fuzzy, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell setting default_shell = %s\n"
+
+#: main.c:988
+#, fuzzy, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell path search set default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr ".úåéðù 30 ìù %s úééäùä"
+
+#  Pay attention: this is written to the _right_ of the previous string,
+#  but should look like a single sentence together with it.
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr " äîééúñð\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "--jobserver-fds ïééôàîá `%s' äéåâù úæåøçî :úéîéðô äðëú úì÷ú"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "jobserver ïôåà ìèáî ;-jN áééçî Make-úú :äøäæà"
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+".Make ìù áàä ììëì `+' óñåä .-j1-á ùåîéù äùòéé ;ïéîæ åðéà jobserver :äøäæà"
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr ".úçà íòôî øúåé ïúéð éð÷ú èì÷ õåøòî Makefile"
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (temporary file)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (temporary file)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ".åæ úëøòîá êîúð åðéà (-j) éìéá÷î òåöéá"
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr ".(-j1) éúøãñ ïôåàá åòöåáé úåãå÷ô"
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "creating jobs pipe"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "init jobserver pipe"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "...makefile éöá÷ ïëãòî\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ".ùãçî åøöééìî òðîð ;úéôåñðéà äàìåì øåöéì ìåìò `%s' Makefile\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr ".`%s' makefile ìù ùãçî-äøéöéá äì÷ú"
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr ".àöîð àì `%s' ììëåî makefile"
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "àöîð àì `%s' Makefile"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr ".úéøå÷îä äé÷éúì øåæçì ïúéð àì"
+
+#: main.c:2343
+#, fuzzy, c-format
+msgid "Re-executing[%u]:"
+msgstr "Re-executing:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (temporary file): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "makefile éöá÷ åàöîð àìå úåøèî ïåéö ïéà"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "úåøèî ïéà"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "...ãòé úåøèî ïëãòî\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ".äîìù àì úåéäì äìåìò äéðáä .ïåòù úùéìâ äúìâúð :úåøéäæ"
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "%s [íéðééôàî] [äøèî] ...  :ùåîéù ïôåà\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+
+#: main.c:2721
+#, fuzzy, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"\n"
+".<bug-make@gnu.org>-ì äì÷ú éçååéã çåìùì àð\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "éáåéçå íìù èðîåâøà áééçî `-%c' ïééôàî"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "éáåéçå íìù èðîåâøà áééçî `-%c' ïééôàî"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make data base, printed on %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Finished Make data base on %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Unknown error %d"
+
+#: misc.c:522
+#, fuzzy, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s access: user %lu (real %lu), group %lu (real %lu)\n"
+
+#: misc.c:543
+#, fuzzy
+msgid "Initialized access"
+msgstr "Initialized"
+
+#: misc.c:622
+msgid "User access"
+msgstr ""
+
+#: misc.c:670
+msgid "Make access"
+msgstr ""
+
+#: misc.c:704
+msgid "Child access"
+msgstr ""
+
+#: output.c:104
+#, fuzzy, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "an unknown directory"
+
+#: output.c:106
+#, fuzzy, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "an unknown directory"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "directory `%s'\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "directory `%s'\n"
+
+#: output.c:115
+#, fuzzy, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "an unknown directory"
+
+#: output.c:117
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "an unknown directory"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr ""
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "directory `%s'\n"
+
+#: output.c:495 output.c:497
+msgid "write error: stdout"
+msgstr ""
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Stop.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr ""
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "...makefile éöá÷ àøå÷\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Reading makefile `%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (no default goal)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (search path)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (don't care)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (no ~ expansion)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "éàðú ìù éåâù øéáçú"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "äðåùàø äøèî éðôì úåìéçúî úåãå÷ô"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "ïäéðôì ììë àìì úåãå÷ô"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr "(?íéçååø 8 íå÷îá TAB-ì úðååëúä íàä) "
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "%sãéøôî øñç"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "äøèî úéðáú ïéà"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "úåáåøî äøèî úåéðáú"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "`%%' àìì äøèî úéðáú"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "øñç `endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "÷éø äðúùî íù"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "`endef' úàøåä éøçà øúåéî èñ÷è"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "íåéñ àìì `define' úàøåä ,øñç `endef'"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "`endef' úàøåä éøçà øúåéî èñ÷è"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "`%s' úàøåä éøçà øúåéî èñ÷è"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "øúåéî `%s'"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "éàðú ìëì ãéçé `else' ÷ø øúåî"
+
+#: read.c:1899
+#, fuzzy
+msgid "Malformed target-specific variable definition"
+msgstr "äøèîì éôéöôñ äðúùî ìù äéåâù äøãâä"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "íéùøåôî-éúìáå íééèèñ úéðáú éììë ìù áåáøò"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "íéùøåôî-éúìáå íéìéâø íéììë ìù áåáøò"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "ãòéä úéðáú úà úîàåú äðéà `%s' äøèî"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr ":: ïäå : âåñî ïä íéììë ùé `%s' äøèî õáå÷ì"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ".ììë åúåàá úçà íòôî øúåé äòéôåî `%s' äøèî"
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "`%s' äøèî øåáò úåãå÷ô ñøåã :úåøéäæ"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "`%s' äøèî øåáò úåîãå÷ úåãå÷ôî íìòúî :úåøéäæ"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "íéùøåôî-éúìáå íéìéâø íéììë ìù áåáøò"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "äçðæð äøåùä úøúé ;NUL åú éúùâô :äøäæà"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr ".`%s øåáò úåùòì äî ïéà"
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr ".éðëãò øáë `%s'"
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr ".`%s' øåáò úåéåìú óøâ õö÷î\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%säúééðáì íéììë ïéà êà ,`%s' úùøåã `%s'%s äøèî"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s`%s'%s äøèî úééðáì íéììë ïéà"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr ".`%s' äøèî õáå÷ ïçåá\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ".`%s' õáå÷ ïåëãòá éúìùëðå éúéñéð ïîæî àì\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr ".ïë-éðôì ïçáð øáë `%s' õáå÷\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr ".`%s' õáå÷ ïëãòî ïééãò\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr ".`%s' õáå÷ ïëãòì éúîééñ\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr ".íéé÷ åðéà `%s' õáå÷\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr ".`%s' øåáò ùøåôî-éúìá ììë éúàöî\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr ".`%s' øåáò íéùøåôî-éúìá íéììë åàöîð àì\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr ".`%s' øåáò ìãçî úøéøá úåãå÷ôá ùîúùî\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr ".%s <- %s úéìâòî ìåìú èéîùî"
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr ".`%s' äøèî õáå÷ ìù íã÷-úåùéøã íò éúîééñ\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr ".äéðáá `%s' ìù íã÷ä úåùéøã\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr ".`%s' äøèî õáå÷ éáâì íééãé éúîøä\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr ".úåàéâù á÷ò ùãçî äúðáð àì `%s' äøèî"
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ".`%s' íã÷ä úùéøãî äùãç `%s' äøèî\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr ".íéé÷ åðéàù `%s' éàðúë úùøåã `%s' äøèî\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr ".`%s' íã÷ä úùéøãî äðùé `%s' äøèî\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ".`%s' íã÷ä úùéøãî äùãç `%s' äøèî\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ".íã÷ úåùéøã àììå íéìåôë íééúåãå÷ð íò äðéä `%s' äøèî\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ".äùòîì äúðúùä àì íã÷ úùéøã óàå `%s' øåáò úåãå÷ô ïéà\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr ""
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "`%s' äøèî ùãçî úåðáì êøåö ïéà"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr " (`%s' :VPATH õáå÷ íù)"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr ".`%s' äøèî ùãçî úåðáì áééç\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  .`%s' VPATH íùî íìòúî\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ".`%s' øåáò úåãå÷ô õéøî\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr ".ùãçî `%s' úåðáì ïåéñð ìùëð\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr ".`%s' ùãçî úééðáá äçìöä\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ".-q íò úåðáéäì êéøö `%s' äøèî õáå÷\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr ".`%s' øåáò ìãçî úøéøá úåãå÷ôá ùîúùî\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "*** `%s' õáå÷ øåáò (%s > %s) ãéúòá åðéä ïåøçà éåðéù ïîæ :äøäæà ***"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "*** `%s' õáå÷ øåáò (%s > %s) ãéúòá åðéä ïåøçà éåðéù ïîæ :äøäæà ***"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "úéðáú åðéà .LIBPATTERNS ìù `%s' èðîìà"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "%s àöééî åðéà Customs\n"
+
+#: rule.c:495
+#, fuzzy
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# No implicit rules."
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# No implicit rules."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u implicit rules, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, fuzzy, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: num_pattern_rules wrong!  %u != %u"
+
+#  It's no use to try to translate the signal names.
+#: signame.c:84
+msgid "unknown signal"
+msgstr "unknown signal"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Hangup"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interrupt"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Quit"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Illegal Instruction"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Trace/breakpoint trap"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Aborted"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT trap"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT trap"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Floating point exception"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Killed"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Bus error"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Segmentation fault"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Bad system call"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Broken pipe"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarm clock"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Terminated"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "User defined signal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "User defined signal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Child exited"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Power failure"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Stopped"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Stopped (tty input)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Stopped (tty output)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Stopped (signal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU time limit exceeded"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "File size limit exceeded"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtual timer expired"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profiling timer expired"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Window changed"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Continued"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Urgent I/O condition"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O possible"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Resource lost"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Danger signal"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Information request"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Floating point co-processor not available"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatic"
+
+#  These are printed under -p, so they are left in English.
+#: variable.c:1602
+msgid "default"
+msgstr "default"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "environment"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "environment under -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "command line"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "`override' directive"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (from `%s', line %lu):\n"
+
+#: variable.c:1691
+#, fuzzy
+msgid "# variable set hash-table stats:\n"
+msgstr "# %u variables in %u hash buckets.\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variables\n"
+
+#: variable.c:1706
+#, fuzzy
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Pattern-specific variable values"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# No pattern-specific variable values."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u pattern-specific variable values"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "`%.*s' øãâåî-éúìá äðúùî :úåøéäæ"
+
+#: vmsfunctions.c:91
+#, fuzzy, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "%d íò ìùëð sys$search\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "ä÷éø äééðôä :úåøéäæ\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "command_state `%s' :úéîéðô äðëú úì÷ú"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ".DCL-î CTRL-Y-á ìåôéè øåùôéàá êøåö úåéäì ìåìò :úåøéäæ\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "úøëåî äðéà '%s'úéðáåî äãå÷ô\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "ä÷éø äãå÷ô :äì÷ú\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "%s-î èì÷ úééðôä\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "%s-ì úåàéâù úééðôä\n"
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "%s-ì èìô úééðôä\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "%s-ì èìô úééðôä\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "%s õéøî úàæ íå÷îá\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "%d :úá-úéðëú úìòôäá äì÷ú\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH Search Paths\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# No `vpath' search paths."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u `vpath' search paths.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# No general (`VPATH' variable) search path."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# General (`VPATH' variable) search path:\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Invalid value in `update_status' member!"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# No files."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr "# average %.3f files per bucket, max %u files in one bucket.\n"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] 0x%x äì÷úî éúîìòúä ***"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "'\"' êåúá ïééãò ,øéáçú úàéâù\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr ".åôñàð íøèù úá-úåéðëú %u ;SIGCHLD ìá÷úä\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr ".úåìéòô úá-úåéðëú øéàùäì ìåìò CTRL-Y :úåøéäæ\n"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DIRECTORY"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "äãåáò úìéçú éðôì DIRECTORY-ì äé÷éú äðù"
+
+#~ msgid "FLAGS"
+#~ msgstr "FLAGS"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "äéìà äôðîä øåáéç êøåöì úéðëúä á÷ò"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "makefile-á íéðúùî íéñøåã äáéáñ éðúùî"
+
+#~ msgid "FILE"
+#~ msgstr "FILE"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "makefile-ë FILE àø÷"
+
+#~ msgid "Ignore errors from commands"
+#~ msgstr "úåéðëú-úúá úåàéâùî íìòúä"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "DIRECTORY-á íéììëð makefile éöá÷ ùôç"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "N-ì úçúî ñîåòä íà àìà úåáåøî úåãåáò ìéçúú ìà"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "íúåà ñôãä ÷ø ;ììë úåãå÷ô õéøú ìà"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "ùãçî åúåà äðáú ìàå ,ïùé ãàî äéä åìéàë FILE-á âäð"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "úåòöåáî úãå÷ô âéöú ìà"
+
+#~ msgid "Turns off -k"
+#~ msgstr "-k ìèáî"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "øùôàù ùãç éëä äéä FILE åìéàë âäð"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr ".ïéîæ åðéà sh.exe íà --jobs åà -j-á êåîúì ïúéð àì"
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr ".éúøãñ ïôåàá åòöåáé úåãå÷ô"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "íéáåøî --jobserver-fds éðééôàî :úéîéðô äðëú úì÷ú"
+
+#~ msgid ""
+#~ ", by Richard Stallman and Roland McGrath.\n"
+#~ "%sBuilt for %s\n"
+#~ "%sCopyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000\n"
+#~ "%s\tFree Software Foundation, Inc.\n"
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ "\n"
+#~ "%sReport bugs to <bug-make@gnu.org>.\n"
+#~ "\n"
+#~ msgstr ""
+#~ ", by Richard Stallman and Roland McGrath.\n"
+#~ "%s           %s øåáò äúðáð\n"
+#~ "%sCopyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000\n"
+#~ "%s\tFree Software Foundation, Inc.\n"
+#~ "%s                     .øå÷î éöá÷á ïééò ä÷úòä úåéåëæì ;úéùôç äðëú éäåæ\n"
+#~ "%s     äîàúä åà úåøéçñ øåáò àì åìéôà ;úåéøçà áúëá äååìî äðéà åæ úéðëåú\n"
+#~ "%s                                                       .éäùìë úéìëúì\n"
+#~ "\n"
+#~ "%s                           <bug-make@gnu.org>-ì äì÷ú éçååéã çåìùì àð\n"
+#~ "\n"
+
+#~ msgid "Entering"
+#~ msgstr "Entering"
+
+#~ msgid "Leaving"
+#~ msgstr "Leaving"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "éìàåèøéåä ïåøëæä øîâð"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "øúåéî `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "ä÷éø `override' úàøåä"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "äéåâù `override' úàøåä"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "õáå÷ íù àìì `%sinclude' úàøåä"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "ä÷éø íã÷ä úùéøã úéðáú úà äøéàùî `%s' äøèî"
+
+#~ msgid "# No variables."
+#~ msgstr "# No variables."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# average of %.1f variables per bucket, max %u in one bucket.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# average of %d.%d variables per bucket, max %u in one bucket.\n"
diff --git a/po/hr.gmo b/po/hr.gmo
new file mode 100644
index 0000000..6340916
--- /dev/null
+++ b/po/hr.gmo
diff --git a/po/hr.po b/po/hr.po
new file mode 100644
index 0000000..36db598
--- /dev/null
+++ b/po/hr.po
@@ -0,0 +1,2427 @@
+# Translation of make to Croatian.
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Hrvoje Niksic <hniksic@xemacs.org>, 2002.
+# Tomislav Krznar <tomislav.krznar@gmail.com>, 2012.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.82\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2012-10-31 17:32+0100\n"
+"Last-Translator: Tomislav Krznar <tomislav.krznar@gmail.com>\n"
+"Language-Team: Croatian <lokalizacija@linux.hr>\n"
+"Language: hr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "pokušaj korištenja nepodržane mogućnosti: „%s�"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "touch elementa arhive nije dostupan na VMS-u"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Arhiva „%s� ne postoji"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: „%s� nije ispravna arhiva"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Element „%s� ne postoji u „%s�"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Neispravan povratni kod iz ar_member_touch na „%s�"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() nije izdvojio informacije o modulu, status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() nije uspio sa stanjem = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "ne mogu otvoriti biblioteku „%s� za traženje elementa „%s�"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "�lan „%s�%s: %ld bajtova na %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (ime je možda odsje�eno)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Datum %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mod = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Prekid.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Element arhive „%s� je možda lažan; nije izbrisan"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Element arhive „%s� je možda lažan; nije izbrisan"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Brišem datoteku „%s�"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Brišem datoteku „%s�"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  recept za izvršavanje"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (ugrađeno):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (iz „%s�, redak %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Direktoriji\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: ne može se izvršiti stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (tipka %s, vrijeme uređivanja %d): ne može se otvoriti.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (uređaj %d, indeksni �vor [%d,%d,%d]): ne može se otvoriti.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (uređaj %ld, indeksni �vor %ld): ne može se otvoriti.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (tipka %s, vrijeme uređivanja %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (uređaj %d, indeksni �vor [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (uređaj %ld, indeksni �vor %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Nijedna"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " datoteka, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "nijedna"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " nemogućnost"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " do sada."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " nemogućnosti u %lu direktorija.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekurzivna varijabla „%s� pokazuje (na kraju) na sebe"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "nedovršena referenca na varijablu"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Naveden je recept za datoteku „%s� na %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Recept za datoteku „%s� nađen je implicitnim pretraživanjem propisa,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "ali se „%s� sada smatra istom datotekom kao i „%s�."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Recept za „%s� će se zanemariti u korist onog za „%s�."
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "ne mogu preimenovati „%s� s jednim dvoto�jem u „%s� s dva dvoto�ja"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "ne mogu preimenovati „%s� s dva dvoto�ja u „%s� s jednim dvoto�jem"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Brišem posrednu datoteku „%s�"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Uklanjam posredne datoteke...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Trenutno vrijeme"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Vremenska oznaka izvan granica; zamjenjujem s %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Nije meta:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Vrijedna datoteka (preduvjet mete .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Lažna meta (preduvjet mete .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Meta naredbenog retka."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Zadana, MAKEFILES ili -include/sinclude datoteka izrade."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Nema implicitnih propisa."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#   Implicitna pretraga propisa je izvršena."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Implicitna pretraga propisa nije izvršena."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Korijen implicitnog/stati�kog uzorka: „%s�\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Datoteka je posredni preduvjet."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Također napravi:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Vrijeme promjene nikada nije provjereno."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Datoteka ne postoji."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Datoteka je vrlo stara."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Zadnja promjena %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Datoteka je ažurirana."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Datoteka nije ažurirana."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Recept koji se trenutno izvršava (OVO JE BUG)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Recept ovisnosti koji se izvršava (OVO JE BUG)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Uspješno ažuriran."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Treba ga ažurirati (-q je postavljen)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Nije ažuriran."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Neispravna vrijednost u elementu „command_state�!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Datoteke"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# statistike tablice raspršivanja datoteka:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "prvi argument funkcije „word� nije broj"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "prvi argument funkcije „word� mora biti veći od 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "drugi argument funkcije „wordlist� nije broj"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "drugi argument funkcije „wordlist� nije broj"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): DuplicateHandle(In) nije uspio (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_open_pipe(): DuplicateHandle(Err) nije uspio (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() nije uspio (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() nije uspio\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "ÄŒistim privremenu skupnu datoteku %s.\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "greška pisanja: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "nedovoljan broj argumenata (%d) funkciji „%s�"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "neimplementirano na ovoj platformi: funkcija „%s�"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "nedovršen poziv funkciji „%s�: nedostaje „%c�"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "nedovoljan broj argumenata (%d) funkciji „%s�"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "nedovoljan broj argumenata (%d) funkciji „%s�"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: opcija „%s� je višezna�na\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: opcija „--%s� ne dozvoljava argument\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: opcija „%c%s� ne dozvoljava argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: opcija „%s� zahtijeva argument\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: neprepoznata opcija „--%s�\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: neprepoznata opcija „%c%s�\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: nedozvoljena opcija -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: neispravna opcija -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opcija zahtijeva argument -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: opcija „-W %s� je višezna�na\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: opcija „-W %s� ne dozvoljava argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"ne mogu alocirati %lu bajtova za tablicu raspršivanja: memorija iscrpljena"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Opterećenje=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Preraspodjela=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Sudari=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Tražim implicitni propis za „%s�.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Tražim implicitni propis za „%s� koji pripada elementu arhive.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Izbjegavam rekurziju implicitnog propisa.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Pokušavam propis uzorka s korijenom „%.*s�.\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Odbacujem nemoguće pravilo preduvjeta „%s�.\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Odbacujem nemoguć implicitni preduvjet „%s�.\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Pokušavam s propisom preduvjeta „%s�.\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Pokušavam s implicitnim preduvjetom „%s�.\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Našao preduvjet „%s� kao VPATH „%s�\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Tražim propis s posrednom datotekom „%s�.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Ne mogu napraviti privremenu datoteku\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (jezgra izba�ena)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Greška %d (zanemarena)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (ugrađeno):"
+
+#: job.c:503
+#, fuzzy, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "upozorenje: poništavam recept za metu „%s�"
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Greška %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Greška 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Čekam nedovršene poslove...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Živo dijete %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (udaljen)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Skupljam neuspješno dijete %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Skupljam uspješno dijete %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "ÄŒistim privremenu skupnu datoteku %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "ÄŒistim privremenu skupnu datoteku %s\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Uklanjam dijete %p PID %s%s iz lanca.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Ispušten simbol za dijete %p (%s).\n"
+
+# Što bi ovdje trebalo ići?
+#: job.c:1036
+msgid "write jobserver"
+msgstr "poslužitelj poslova pisanja"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() nije uspio pokrenuti proces (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Izbrojeno %d argumenata u neuspjelom pokretanju\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Smještam dijete %p (%s) PID %s%s u lanac.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Preuzet simbol za dijete %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "cjevovod poslova �itanja"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Arhiva „%s� ne postoji"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%sNema propisa za izradu mete „%s�, koji traži „%s�%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+"ne mogu silom primijeniti ograni�enje opterećenja na ovom operacijskom "
+"sustavu"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "ne mogu silom primijeniti ograni�enje opterećenja: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"nema više upravlja�a datotekama: ne mogu udvostru�iti standardni ulaz\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"nema više upravlja�a datotekama: ne mogu udvostru�iti standardni izlaz\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"nema više upravlja�a datotekama: ne mogu udvostru�iti standardni ulaz\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Ne mogu obnoviti standardni ulaz\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Ne mogu obnoviti standardni izlaz\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Ne mogu obnoviti standardni ulaz\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make je skupio dijete pid %s, još uvijek �eka pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Naredba nije pronađena"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Program ljuske nije pronađen"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: prostor okoline je možda iscrpljen"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL se promijenio (prije „%s�, sada „%s�)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Stvaram privremenu skupnu datoteku %s\n"
+
+#: job.c:3206
+#, fuzzy
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Sadržaj skupne datoteke:%s\n"
+"\t%s\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Sadržaj skupne datoteke:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (redak %d) Neispravan kontekst ljuske (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Paralelni poslovi (-j) nisu podržani na ovoj platformi."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opcije:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Zanemareno zbog kompatibilnosti.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Bezuvjetno izradi sve mete.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIREKTORIJ, --directory=DIREKTORIJ\n"
+"                              Prijeđi u DIREKTORIJ prije po�etka rada.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Ispiši puno podataka za debugiranje.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=ZASTAVICE]         Ispiši razne vrste informacija za "
+"debugiranje.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Varijable okoline imaju veću važnost od\n"
+"                              datoteka izrade.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=NIZ                  Postupaj s NIZOM kao naredbom datoteke "
+"izrade.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f DATOTEKA, --file=DATOTEKA, --makefile=DATOTEKA\n"
+"                              Pro�itaj DATOTEKU kao datoteku izrade.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Ispiši ovu poruku i izađi.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Zanemari greške iz recepata.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIREKTORIJ, --include-dir=DIREKTORIJ\n"
+"                              Traži u DIREKTORIJU uklju�ene datoteke "
+"izrade.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Dozvoli N istovremenih poslova; bez argumenta\n"
+"                              ih dozvoli beskona�no.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Nastavi s radom ako se neke mete ne mogu "
+"izraditi.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Ne pokreći višestruke poslove, osim ako je\n"
+"                              opterećenje ispod N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Koristi posljednji mtime između simboli�kih "
+"veza i mete.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Nemoj zapravo pokrenuti nijedan recept,\n"
+"                              samo ih ispiši.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o DATOTEKA, --old-file=DATOTEKA, --assume-old=DATOTEKA\n"
+"                              Smatraj da je DATOTEKA vrlo stara i nemoj ju\n"
+"                              ponovo napraviti.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Ispiši „make� internu bazu podataka.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Ne pokreći recepte; izlazno stanje ozna�ava\n"
+"                              je li sve ažurirano.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      Onemogući ugrađene implicitne propise.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Onemogući ugrađene vrijednosti varijabli.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Ne ispisuj recepte.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Isklju�uje -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Umjesto ponovne izrade dodirni izgrađene "
+"mete.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  -d                          Ispiši puno podataka za debugiranje.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Ispiši „make� broj ina�ice i izađi.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Ispiši trenutni direktorij.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Isklju�i -w, �ak i ako je implicitno "
+"uklju�en.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W DATOTEKA, --what-if=DATOTEKA, --new-file=DATOTEKA,\n"
+"  --assume-new=DATOTEKA\n"
+"                              Smatraj DATOTEKU beskona�no novom.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Upozori pri referenciranju nedefinirane "
+"varijable.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "prazan niz nije ispravan naziv datoteke"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "nepoznata oznaka razine debugiranja „%s�"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Uhvaćen prekid/iznimka (kod = 0x%lx, adr = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filtar nekontrolirane iznimke pozvan iz programa %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Pristupni prekršaj: operacija pisanja na adresi 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Pristupni prekršaj: operacija �itanja na adresi 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() postavlja default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() pretraga putanje postavlja default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s se zaustavlja na 30 sekundi..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "gotov sa sleep(30).  Nastavljam.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, fuzzy, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Klijent poslužitelja poslova (fds %d,%d)\n"
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "interna greška: neispravan --jobserver-fds niz „%s�"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Klijent poslužitelja poslova (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"upozorenje: pod-make prisilno postavlja -jN: onemogućujem poslužitelj "
+"poslova."
+
+# Treba li ovo prevesti?
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup poslužitelj poslova"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"upozorenje: poslužitelj poslova nedostupan: koristim -j1.  Dodaj `+' na "
+"roditeljev propis izrade."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Datoteka izrade sa standardnog ulaza navedena dvaput."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (privremena datoteka)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (privremena datoteka)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Paralelni poslovi (-j) nisu podržani na ovoj platformi."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Vraćam na�in rada s jednim poslom (-j1)."
+
+#: main.c:1994
+#, fuzzy, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Klijent poslužitelja poslova (fds %d,%d)\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "stvaram cjevovod poslova"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inicijaliziraj cjevovod poslužitelja poslova"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Simboli�ke veze nisu podržane: onemogućujem -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Ažuriram datoteke izrade....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Datoteka izrade „%s� bi mogla ući u petlju; ne izgrađujem ponovo.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Nisam uspio ponovo izgraditi datoteku izrade „%s�."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Uklju�eni datoteka izrade „%s� nije pronađena."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Datoteka izrade „%s� nije pronađena"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Ne mogu se vratiti u izvorni direktorij."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Ponovo izvršavam[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (privremena datoteka): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL sadrži više od jedne mete"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nijedna meta nije navedena, niti je pronađena ijedna datoteka izrade"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Nema meta"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Ažuriram ciljne mete....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"upozorenje: Uo�ena je nepravilnost sata.  Izgradnja bi mogla biti nedovršena."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Uporaba: %s [opcije] [meta] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Program izgrađen za %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Program izgrađen za %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Prijavite greške na <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "opcija „%s%s� zahtijeva neprazan znakovni niz kao argument"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "opcija „-%c� zahtijeva pozitivan cjelobrojni argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sIzgrađen za %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sIzgrađen za %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicenca GPLv3+: GNU GPL ina�ica 3 ili kasnija <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sOvo je slobodan softver: slobodno ga smijete mijenjati i dijeliti.\n"
+"%sNEMA JAMSTAVA, do krajnje mjere dozvoljene zakonom.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make baza podataka, ispisana na %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Kraj Make baze podataka na %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Nepoznata greška %d"
+
+# Da prevedem ovo?
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: korisnik %lu (stvarno %lu), grupa %lu (stvarno %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Inicijaliziran pristup"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Korisni�ki pristup"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make pristup"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Pristup djeteta"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Ulazim u nepoznat direktorij\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Izlazim iz nepoznatog direktorija\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Ulazim u direktorij „%s�\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Izlazim iz direktorija „%s�\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Ulazim u nepoznat direktorij\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Izlazim iz nepoznatog direktorija\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Ulazim u direktorij „%s�\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Izlazim iz direktorija „%s�\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "greška pisanja: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Zaustavi.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "ÄŒitam datoteke izrade...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Čitam datoteku izrade „%s�"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (nema zadane mete)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (putanja pretraživanja)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (nije važno)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (bez proširenja ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "neispravna sintaksa uvjeta"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "recept po�inje prije prve mete"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "nedostaje propis prije recepta"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (jeste li htjeli TAB umjesto 8 razmaka?)"
+
+# Grr, živjela engleska množina!  I što sad da radim s onim %s-om?
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "nedostaju znakovi razdvajanja (%s)"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "nedostaje uzorak mete"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "višestruki uzorci meta"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "uzorak mete ne sadrži „%%�"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "nedostaje „endif�"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "prazno ime varijable"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "suvišan tekst nakon direktive „define�"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "nedostaje „endef�, nedovršen „define�"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "suvišan tekst nakon direktive „endef�"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "suvišan tekst nakon direktive „%s�"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "suvišan „%s�"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "samo jedan „else� po uvjetu"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Izobli�ena definicija o meti ovisne varijable"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "preduvjeti ne mogu biti definirani u receptima"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "pomiješani implicitni i stati�ki propisi uzoraka"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "pomiješani implicitni i normalni propisi"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "meta „%s� ne odgovara uzorku mete"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "datoteka mete „%s� ima unose i kod : i kod ::"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "meta „%s� je navedena više nego jednom u istom propisu."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "upozorenje: poništavam recept za metu „%s�"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "upozorenje: zanemarujem stari recept za metu „%s�"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "pomiješani implicitni i normalni propisi"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "upozorenje: uo�en je NUL znak; ostatak retka se zanemaruje"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Ništa za napraviti za „%s�."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "„%s� je ažuriran."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Čistim datoteku „%s�.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sNema propisa za izradu mete „%s�, koji traži „%s�%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sNema propisa za izradu mete „%s�%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Razmatram datoteku mete „%s�.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Nedavno bezuspješno pokušao ažurirati datoteku „%s�.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Datoteka „%s� je već razmatrana.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Još uvijek ažuriram datoteku „%s�.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Završio s ažuriranjem datoteke „%s�.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Datoteka „%s� ne postoji.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Upozorenje: .LOW_RESOLUTION_TIME datoteka „%s� ima vremensku oznaku "
+"visoke rezolucije"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Pronađen implicitni propis za „%s�.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Nisam našao nijedan implicitni propis za „%s�.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Koristim zadani recept za „%s�.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Kružna ovisnost %s <- %s ispuštena."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Završeni preduvjeti datoteke mete „%s�.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Preduvjeti „%s� se izrađuju.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Odustajem od datoteke mete „%s�.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Meta „%s� nije ponovo izrađena zbog grešaka."
+
+# Nisam siguran da sam ovo ispravno shvatio.
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Preduvjet „%s� služi samo za redoslijed za metu „%s�.\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Preduvjet „%s� mete „%s� ne postoji.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Preduvjet „%s� noviji je od mete „%s�.\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Preduvjet „%s� stariji je od mete „%s�.\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Meta „%s� je dvoto�je, a nema preduvjete.\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Nema recepta za „%s�, a nijedan preduvjet nije promijenjen.\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Izrađujem „%s� zbog zastavice always-make.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Ponovna izrada mete „%s� nije potrebna"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; koristim VPATH ime „%s�"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Moram ponovo izraditi metu „%s�.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Zanemarujem VPATH ime „%s�.\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Recept za „%s� se izvršava.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Nisam uspio ponovo izraditi datoteku mete „%s�.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Uspješno ponovo izrađena datoteka mete „%s�.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Datoteku mete „%s� treba ponovo izraditi zbog -q.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Koristim zadane naredbe za „%s�.\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Upozorenje: Vrijeme uređivanja datoteke „%s� je u budućnosti"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+"Upozorenje: Vrijeme uređivanja datoteke „%s� je %s sekundi u budućnosti"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Element „%s� iz .LIBPATTERNS nije uzorak"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs neće izvesti: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Implicitni propisi"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Nema implicitnih propisa."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u implicitnih propisa, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " završni."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: neispravan num_pattern_rules!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "nepoznat signal"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Završetak"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Prekid"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Izlaz"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Nedozvoljena instrukcija"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Zamka za praćenje/prekidnu to�ku"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Prekinut"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT zamka"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT zamka"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Iznimka pomi�nog zareza"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Prekinut"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Sabirni�ka greška"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Segmentacijska greška"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Neispravan sustavski poziv"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Prekinut cjevovod"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Budilica"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Završen"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Korisni�ki definiran signal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Korisni�ki definiran signal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Dijete je završilo"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Prekid napajanja"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Zaustavljen"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Zaustavljen (tty ulaz)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Zaustavljen (tty izlaz)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Zaustavljen (signalom)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Prekora�eno ograni�enje procesorskog vremena"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Prekora�eno ograni�enje veli�ine datoteke"
+
+# Kako prevesti "virtual timer"?
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtualna Å¡toperica istekla"
+
+# Kako prevesti "profiling timer"?
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Å toperica profiliranja istekla"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Promijenjen prozor"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Nastavljen"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Hitno U/I stanje"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "U/I moguć"
+
+# Jesu li ova dva signala vic ili što?  U svakom slu�aju, ovo su samo
+# descriptioni.  Za svaki slu�aj, nisam ih dirao.
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Resurs izgubljen"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Signal za opasnost"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Zahtjev za informacijom"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Koprocesor za rad s pomi�nim zarezom nije dostupan"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"%s strcache korišteno: ukupno = %d (%d) / max = %d / min = %d / prosjek = "
+"%d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+"%s strcache korišteno: ukupno = %d (%d) / max = %d / min = %d / prosjek = "
+"%d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s strcache slobodno: ukupno = %d (%d) / max = %d / min = %d / prosjek = %d\n"
+
+#: strcache.c:287
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s # nizova u strcache: %d / pretrage = %lu / pronalasci = %lu\n"
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# statistike tablice raspršivanja datoteka:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatsko"
+
+#: variable.c:1602
+msgid "default"
+msgstr "zadano"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "okolina"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "datoteka izrade"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "okolina pod -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "naredbeni redak"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "direktiva „override�"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (iz „%s�, redak %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statistike tablice raspršivanja skupova varijabli:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Varijable\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Uzorcima svojstvene vrijednosti varijabli"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Nema uzorcima svojstvenih vrijednosti varijabli."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u uzorcima svojstvenih vrijednosti varijabli"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "upozorenje: nedefinirana varijabla „%.*s�"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() nije uspio s %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Upozorenje: Prazno preusmjeravanje\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "interna greška: „%s� command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-upozorenje, možda ćete morati ponovo omogućiti upravljanje s CTRL-Y iz DCL-"
+"a.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "UGRA�EN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "UGRA�EN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "UGRA�EN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Nepoznata ugrađena naredba „%s�\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Greška, prazna naredba\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Preusmjeren ulaz iz %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Preusmjerene greške u %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Dodaj izlaz na %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Preusmjeren izlaz u %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Dodaj %.*s i po�isti\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Umjesto toga, izvršavam %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Greška pri pokretanju, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH putanje za pretraživanje\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Nema „vpath� putanja za pretraživanje."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u „vpath� putanja za pretraživanje.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Nema općenite putanje za pretraživanje (varijabla „VPATH�)."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Općenita putanja za pretraživanje (varijabla „VPATH�):\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Neispravna vrijednost u elementu „update_status�!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Greška 0x%x (zanemarena)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Pozivam recept iz %s:%lu za ažuriranje mete „%s�.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Pozivam ugrađeni recept za ažuriranje mete „%s�.\n"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "interna greška: višestruko pojavljivanje opcije --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "virtualna memorija iscrpljena"
+
+# Što bi ovdje trebalo ići?
+#~ msgid "write error"
+#~ msgstr "gresÌŒka pisanja"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # strcache međuspremnika: %d (* %d B/međuspremniku = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# statistike strcache tablice raspršivanja:\n"
+#~ "# "
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "UGRA�EN RM %s\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Greška u sintaksi, još uvijek unutar '\"'\n"
+
+# Nepožetene ili nepožnjete?
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Dobio SIGCHLD; %u nepožetene djece.\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-upozorenje, CTRL-Y će ostaviti potproces(e) na životu.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Nemojte koristiti -j ili --jobs ako sh.exe nije dostupan."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Resetiram make u mod jednog posla."
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sOvaj program je slobodan; u izvornom kodu nalaze se uvjeti kopiranja.\n"
+#~ "%sNema NIKAKVOG jamstva, �ak ni za PROIZVODNOST ili UPOTREBLJIVOST ZA\n"
+#~ "%sPOJEDINU SVRHU.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "suvišan `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "prazna direktiva `ovverride'"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "neispravna direktiva `override'"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "nedostaje naziv spisa za `%sinclude'"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "meta `%s' ostavlja prerekvizitni uzorak praznim"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Nijedan spis."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u spisa u %u raspršenih džepova.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr "# prosje�no %.3f spisa po džepu, maks. %u spisa u jednom džepu.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DIREKTORIJ"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "Promijeni u DIREKTORIJ prije nego što išta napraviš"
+
+#~ msgid "FLAGS"
+#~ msgstr "ZASTAVICE"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Zaustavi proces tako da se debugger može zaka�iti"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "Varijable iz okoliša imaju veću važnost od makefilea"
+
+#~ msgid "FILE"
+#~ msgstr "SPIS"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "Pro�itaj SPIS kao makefile"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "Pretraži DIREKTORIJ za uklju�enim makefileovima"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "Ne pokreći višestruke poslove osim ako je opterećenje ispod N"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "Nemoj zapravo pokrenuti nijednu naredbu; samo ih ispiši"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "Pretpostavi da je SPIS vrlo star i nemoj ga ponovo napraviti"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "Ne ispisuj naredbe"
+
+#~ msgid "Turns off -k"
+#~ msgstr "Isklju�uje -k"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "Smatraj SPIS beskona�no novim"
+
+#~ msgid "Entering"
+#~ msgstr "Ulazim u"
+
+#~ msgid "Leaving"
+#~ msgstr "Izlazim iz"
+
+#~ msgid "# No variables."
+#~ msgstr "# Nema varijabli."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# prosje�no %.1f varijabli po džepu, maks. %u u jednom džepu.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# prosje�no %d.%d varijabli po džepu, maks. %u u jednom džepu.\n"
diff --git a/po/id.gmo b/po/id.gmo
new file mode 100644
index 0000000..44d6423
--- /dev/null
+++ b/po/id.gmo
diff --git a/po/id.po b/po/id.po
new file mode 100644
index 0000000..ef0dd99
--- /dev/null
+++ b/po/id.po
@@ -0,0 +1,2395 @@
+# Pesan Bahasa Indonesia untuk GNU make
+# Copyright (C) 2006 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Arif E. Nugroho <arif_endro@yahoo.com>, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2014-07-30 18:30+0700\n"
+"Last-Translator: Arif E. Nugroho <arif_endro@yahoo.com>\n"
+"Language-Team: Indonesian <translation-team-id@lists.sourceforge.net>\n"
+"Language: id\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "usaha untuk menggunakan layanan yang tidak didukung: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "touch anggota archive tidak tersedia di VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Archive '%s' tidak ada"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s' bukan archive yang valid"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Anggota '%s' tidak terdapat dalam '%s'"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Kode kembali tidak baik dari ar_member_touch pada '%s'"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() gagal untuk mengekstrak info module, status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() gagal dengan status = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "tidak dapat membuka perpustakaan '%s' untuk melihat anggota '%s'"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Anggota '%s'%s: %ld bytes pada %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (nama mungkin akan di potong)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr " Tanggal %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr " uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Recipe has too many lines (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Berhenti.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Anggota archive '%s' mungkin palsu: tidak dihapus"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Anggota archive '%s' mungkin palsu; tidak dihapus"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Menghapus berkas '%s'"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Menghapus berkas '%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  perintah untuk dijalankan"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (bawaan):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (dari '%s', baris %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Direktori\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: tidak dapat melihat statistik.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (kunci %s, mtime %d): tidak dapat dibuka.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (perangkat %d, inode [%d,%d,%d]): tidak dapat dibuka.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (perangkat %ld, inode %ld): tidak dapat dibuka.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (kunci %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (perangkat %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (perangkat %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Tidak"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " berkas, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "tidak"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " tidak mungkin"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " sejauh ini."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " tidak mungkin dalam direktori %lu.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Variabel rekursif '%s' menunjuk pada dirinya sendiri"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "referensi variabel tidak diselesaikan"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Perintah di spesifikasikan untuk berkas '%s' di %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Perintah untuk berkas '%s' ditemukan dalam pencarian aturan implisit,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+"tetapi '%s' sekarang dipertimbangkan sebagai berkas yang sama dengan '%s'."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Perintah untuk '%s' akan diabaikan untuk menghargai '%s'."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "tidak dapat mengubah nama dari kolon-tunggal '%s' ke kolon-ganda '%s'"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "tidak dapat mengubah nama kolon-ganda '%s' menjadi kolon-tunggal '%s'"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Menghapus berkas sementara '%s'"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Menghapus berkas sementara...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Waktu saat ini"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Timestamp diluar jangkauan; digantikan dengan %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Bukan sebuah target:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Berkas sebelumnya (dibutuhkan oleh .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Phony target (dibutuhkan oleh .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Baris perintah target."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Merupakan baku, MAKEFILES atau -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "# Tidak ada aturan implisit."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Pencarian aturan implisit sudah selesai."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Pencarian aturan implisit belum selesai."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Pola/implisit atau statis stem: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Berkas merupakan dibutuhkan untuk sementara."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Juga membuat:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Waktu ubah sudah diperiksa."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Berkas tidak ada."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Berkas sudah sangat tua."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Terakhir dimodifikasi %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Berkas sudah diperbarui."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Berkas belum diperbarui."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Perintah sedang berjalan (INI MERUPAKAN SEBUAH BUG)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Perintah ketergantungan sedang berjalan (INI MERUPAKAN SEBUAH BUG)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Sukses memperbarui."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Perlu untuk diupdate (-q diset)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Gagal untuk mengupdate."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Nilai yang salah dalam anggota 'command_state' !"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Berksa"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# berkas statistik hash-table:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Field '%s' not cached: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "argumen pertama untuk fungsi 'word' bukan numerik"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "argumen pertama untuk fungsi 'word' harus lebih besar dari 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "argumen pertama untuk fungsi 'wordlist' bukan numerik"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "argumen kedua dari fungsi 'wordlist' bukan numerik"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) gagal (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) gagal (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() gagal (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() gagal\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Membersihkan berkas batch sementara %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "menulis: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Invalid file operation: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "Jumlah dari argumen (%d) untuk fungsi '%s' tidak mencukupi"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "Tidak terimplementasi dalam platform ini: fungsi '%s'"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "fungsi '%s' tidak diselesaikan: hilang '%c'"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Empty function name\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Invalid function name: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Function name too long: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Jumlah dari argumen (%d) untuk fungsi %s tidak mencukupi\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Jumlah dari argumen (%d) untuk fungsi %s tidak mencukupi\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: opsi '%s' merupakan ambigu\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: opsi '--%s' tidak memperbolehkan argumen\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: opsi '%c%s' tidak memperbolehkan argumen\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: opsi '%s' membutuhkan sebuah argumen\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: opsi tidak dikenali '--%s'\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: opsi tidak dikenali '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opsi tidak legal -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: opsi tidak valid -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opsi membutuhkan sebuah argumen -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: opsi '-W %s' merupakan opsi ambigu\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: opsi '-W %s' tidak memperbolehkan sebuah argumen\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Expanding '%s'\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Evaluating '%s'\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"tidak dapat mengalokasikan %lu bytes untuk tabel hash; kehabisan memory"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Beban=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Tabrakan=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Mencari aturan implisit untuk '%s'.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Mencari aturan implisit untuk anggota-archive pada '%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Menghindari aturan implisit rekursi.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Stem too long: '%.*s'.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Mencoba aturan pola dengan stem '%.*s'.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Menolak persyaratan aturan yang tidak mungkin '%s'.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Menolak persyaratan implisit yang tidak mungkin '%s'.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Mencoba persyaratan dari aturan '%s'.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Mencoba persyaratan implisit '%s'.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Menemukan persyaratan '%s' sebagai VPATH '%s'\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Mencari aturan dengan berkas sementara '%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Tidak dapat membuat berkas sementara\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core di-dump)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (diabaikan)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<bawaan>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: recipe for target '%s' failed"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Error %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Error 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Menunggu pekerjaan yang belum selesai...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Proses anak yang masih berjalan %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (remote)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Reaping anak hilang %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Reaping winning child %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Membersihkan berkas batch sementara %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Membersihkan berkas batch sementara %s failed (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Menghilangkan proses anak %p PID %s%s dari rantai.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "release jobserver semaphore: (Error %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Melepaskan token dari proses anak %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "menulis jobserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() gagal untuk menjalankan proses (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Terhitung %d argumen gagal untuk dijalankan\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Meletakkan proses anak %p (%s) PID %s%s pada rantai proses.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "semaphore or child process wait: (Error %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Memperoleh token untuk proses anak %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "membaca pipa pekerjaan"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: archive '%s' tidak ada"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+"%s: tidak terdapat aturan untuk membuat target '%s', dibutuhkan oleh %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "tidak dapat memaksa mencapai batas beban pada sistem operasi ini"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "tidak dapat memaksa mencapai batas beban: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "tidak ada lagi file handles: tidak dapat menggandakan stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "tidak ada lagi file handles: tidak dapat menggandakan stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "tidak ada lagi file handles: tidak dapat menggandakan stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Tidak dapat mengembalikan stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Tidak dapat mengembalikan stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Tidak dapat mengembalikan stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make reaped child pid %s, tetap menunggu untuk pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Perintah tidak ada"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Shell program tidak ditemukan"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: mungkin kehabisan ruang environment"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL berubah (sebelumnya '%s', sekarang '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Membuat berkas batch sementara %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Batch file contents:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Batch file contents:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (baris %d) shell context tidak baik (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Failed to open global symbol table: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Loaded object %s is not declared to be GPL compatible"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Failed to load symbol %s from %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Empty symbol name for load: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Loading symbol %s from %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Parallel jobs '-j' tidak didukung dalam platform ini."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opsi:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Diabaikan untuk kompatibilitas.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Membuat semua target secara tidak "
+"kondisional.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORI, --directory=DIREKTORI\n"
+"                              Pindah ke DIREKTORI sebelum melakukan apapun.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Menampilkan banyak informasi debug.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAGS]             Menampilkan berbagai tipe informasi debug.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Variabel lingkungan memaksa makefiles.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f BERKAS, --file=BERKAS, --makefile=BERKAS\n"
+"                              Baca BERKAS sebagai sebuah makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Tampilkan pesan ini dan keluar.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Abaikan kesalahan dari perintah yang "
+"dijalankan.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIREKTORI, --include-dir=DIREKTORI\n"
+"                              Cari di DIREKTORI untuk makefile yang "
+"disertakan.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Ijinkan N kerja secara bersamaan. Kerja tidak "
+"terhingga jika tidak diberikan argumen.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Tetap jalan ketika target tidak dapat dibuat.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Jangan menjalankan multiple pekerjaan kecuali "
+"beban dibawah N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Gunakan waktu mtime terbaru diantara symlinks "
+"dan target.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                               Jangan menjalankan perintah apapun; tampilkan "
+"saja apa yang akan dikerjakan.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FILE, --old-file=BERKAS, --assume-old=BERKAS\n"
+"                              Pertimbangkan BERKAS sudah sangat tua dan "
+"jangan membuatnya lagi.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Tampilkan basis data internal make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Tidak menjalankan perintah. Mengeluarkan "
+"status saja dan mengatakan up to date.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Aturan implisit bawaan tidak digunakan.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Non-aktifkan konfigurasi variabel bawaan.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Jangan menampilkan perintah.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Matikan opsi -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Sentuh target dari pada membuat kembali.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+"  --trace                          Menampilkan banyak informasi debug.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Tampilkan versi dari make dan keluar.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Tampilkan directory saat ini.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Matikan opsi -w, walaupun opsi ini diaktifkan "
+"secara implisit.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FILE, --what-if=BERKAS, --new-file=BERKAS, --assume-new=BERKAS\n"
+"                              Pertimbangkan BERKAS sebagai sebuah berkas "
+"baru.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Peringatkan akan adanya variabel yang tidak "
+"terdefinisi yang direferensikan.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "`string' kosong tidak valid sebagai nama file"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "spesifikasi tingkat debug tidak diketahui '%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "unknown output-sync type '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Interupsi/Exception diterima (kode = 0x%lx, alamat = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Exception filter tidak dapat diatasi dari program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Akses dilanggar: operasi tulis pada alamat 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Akses dilanggar: operasi baca pada alamat 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() diset pada default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() jalur pencarian di set pada default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s dihentikan selama 30 detik..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "selesai tidur(30). Melanjutkan.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Jobserver client (semaphore %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "internal error: tidak valid --jobserver-fds string '%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Jobserver client (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"Peringatan: -jN dipaksakan dalam submake: non-aktifkan mode server pekerja."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup server pekerja"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"Peringatan: server pekerja tidak ada: menggunakan -j1. Tambahkan '+' pada "
+"aturan make paling atas."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile dari standard input dispesifikasikan dua kali."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (berkas sementara)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (berkas sementara)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Parallel jobs (-j) tidak didukung dalam platform ini."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Mereset kembali ke mode satu job (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Jobserver slots limited to %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "creating jobserver semaphore: (Error %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "membuat pipa pekerjaan"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inisiasi pipa server pekerja"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Symbolic links tidak didukung: menonaktifkan opsi -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Memperbarui makefiles....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefile '%s' mungkin berupa loop; tidak membuat lagi.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Gagal membuat lagi makefile '%s'."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Makefile yang dimasukan '%s' tidak ditemukan."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefile '%s' tidak ditemukan"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Tidak dapat kembali ke direktori asal."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Menjalankan kembali[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (berkas sementara): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL berisi lebih dari satu target"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Target tidak dispesifikasikan dan tidak ditemukan makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Tidak ada targets"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Memperbarui tujuan target....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"Peringatan: Clock skew terdeteksi. Pembuatan anda mungkin tidak sempurna"
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Penggunaan: %s [opsi] [target] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Program ini dibuat untuk %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Program ini dibuat untuk %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Laporkan bugs kepada <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "opsi '%s%s' membutuhkan sebuah argument string yang tidak kosong"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "opsi '-%c' membutuhkan sebuah argument `string' yang tidak kosong"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sAplikasi ini dibuat untuk %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sAplikasi ini dibuat untuk %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLisensi GPLv3+: GNU GPL versi 3 atau sesudahnya <http://gnu.org/licenses/"
+"gpl.html>\n"
+"%sIni adalah aplikasi gratis: anda bebas untuk mengubah dan menyebarkannya.\n"
+"%sTidak ada JAMINAN, sepanjang diperbolehkan oleh hukum.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Membuat basis data, ditampilkan %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Selesai membuat basis data %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Kesalahan tidak diketahui %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: pengguna %lu (ril %lu), grup %lu (ril %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Akses terinisialisasi"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Akses pengguna"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Buat akses"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Akses anak"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Memasuki sebuah direktori yang tidak diketahui\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Meninggalkan sebuah direktori yang tidak diketahui\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Memasuki direktori '%s'\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Meninggalkan direktori '%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Memasuki sebuah direktori yang tidak diketahui\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Meninggalkan sebuah direktori yang tidak diketahui\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Memasuki direktori '%s'\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Meninggalkan direktori '%s'\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "error menulis: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Berhenti.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Membaca makefiles...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Membaca makefile '%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (tidak terdapat tujuan baku)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (jalur pencarian)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (tidak peduli)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (tidak terdapat ekspansi tilde ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Skipping UTF-8 BOM in makefile '%s'\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Skipping UTF-8 BOM in makefile buffer\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "sintak salah dalam kondisional"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: failed to load"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "perintah dijalankan sebelum target pertama"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "hilang aturan sebelum menjalankan perintah"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (apakah yang anda maksud TAB dari pada 8 buah spasi?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "pemisah %s hilang"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "pola target hilang"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "pola target banyak"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "pola target tidak memiliki '%%'"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "hilang 'endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nama variabel kosong"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "Kelebihan text sesudah 'endef' directive"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "hilang 'endef', tidak diselesaikan 'define'"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "kelebihan text sesudah 'endef' directive"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "kelebihan text sesudah '%s' directive"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "kelebihan '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "hanya satu 'else' dalam setiap kondisi"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Definisi variable target-specific memiliki format yang salah"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "persyaratan tidak dapat didefinisikan dalam script perintah"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "aturan pola implisit dan static tercampur"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "aturan implisit dan aturan normal tercampur"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "target '%s' tidak cocok dengan pola target"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "target berkas '%s' keduanya memiliki masukan : dan ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "target '%s' memberikan lebih dari sekali dalam aturan sama."
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "peringatan: memaksa perintah untuk target '%s'"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "peringatan: menghiraukan perintah lama untuk target '%s'"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "aturan implisit dan aturan normal tercampur"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "peringatan: karakter NUL terlihat; baris selanjutnya dihiraukan"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Tidak ada yang harus dilakukan untuk '%s'."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' sudah baru."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Pruning file '%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%sTidak terdapat aturan untuk membuat target '%s', dibutuhkan oleh '%s'%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sTidak terdapat aturan untuk membuat target '%s'%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Mempertimbangkan berkas target '%s'.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Baru saja dicoba dan gagal untuk memperbarui berkas '%s'.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Berkas '%s' baru saja dipertimbangkan.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Sedang memperbarui berkas '%s'.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Selesai memperbarui berkas '%s'.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Berkas '%s' tidak ada.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Peringatan: .LOW_RESOLUTION_TIME berkas '%s' memiliki sebuah penanda "
+"waktu dengan resolusi tinggi"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Ditemukan sebuah aturan implisit untuk '%s'.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Tidak terdapat aturan implisit untuk membuat '%s'.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Menggunakan perintah baku untuk '%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Ketergantungan %s <- %s melingkar dijatuhkan."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Selesai melakukan semua persyaratan untuk berkas target '%s'.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Persyaratan untuk membuat '%s' sedang dibuat.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Menyerah untuk membuat target berkas '%s'.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Target '%s' tidak dibuat lagi karena ada errors."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Persyaratan untuk '%s' adalah order-only untuk target '%s'.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Persyaratan untuk '%s' untuk target '%s' tidak ada.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Persyaratan untuk '%s' lebih baru dari pada target '%s'.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Persyaratan untuk '%s' lebih tua dari pada target '%s'.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Target '%s' merupakan kolon-ganda dan tidak memiliki syarat.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Tidak ada perintah untuk '%s' dan persyaratan tidak berubah.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Membuat '%s' karena adanya tanda always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Tidak perlu membuat lagi target '%s'"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; menggunakan nama VPATH '%s'"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Harus membuat lagi target '%s'.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr " Mengabaikan nama VPATH '%s'.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Perintah dari '%s' sedang dijalankan.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Gagal membuat lagi target berkas '%s'.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Sukses membuat kembali target berkas '%s'.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Target berkas '%s' dibutuhkan untuk membuat kembali dengan opsi -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Menggunakan perintah baku untuk '%s'.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Peringatan: Berkas '%s' memiliki waktu modifikasi dimasa depan"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Peringatan: Berkas '%s' memiliki waktu modifikasi %s s kedepan"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS elemen '%s' bukan merupakan sebuah pattern"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Custom tidak akan men-export: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Aturan implisit."
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Tidak ada aturan implisit."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u aturan implisit, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: num_pattern_rules salah! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "sinyal tidak diketahui"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Hangup"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interupsi"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Berhenti"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Instruksi Tidak Legal"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Penangkap trace/breakpoint"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Dibatalkan"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Penangkap IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Penangkap EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Eksepsi titik pecahan"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Terbunuh"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Bus error"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Kesalahan segmentasi"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Panggilan sistem buruk"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Pipa rusak"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarm"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Dimatikan"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Sinyal definisi pengguna 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Sinyal definisi pengguna 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Proses anak berakhir"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Listrik bermasalah"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Dihentikkan"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Dihentikan (masukkan tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Dihentikan (keluaran tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Dihentikan (sinyal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Batas waktu CPU telah terlampaui"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Batas maksimal ukuran berkas terlampaui"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Pewaktu maya habis"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Pewaktu profiling habis"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Jendela berubah"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Dilanjutkan"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Kondisi I/O penting"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O mungkin"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Resource hilang"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Sinyal bahaya"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Permintaan informasi"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "co-processor titik pecahan tidak tersedia"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s # dari buffer strcache: \n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s strcache free: %lu total = (%lu) / mak = %lu / min = %lu / rata-rata = "
+"%lu\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "besar %s strcache: total = %lu / count = %lu / rata-rata = %lu\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s strcache free: total = %lu / mak = %lu / min = %lu / rata-rata = %hu\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# berkas statistik hash-table:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "otomatis"
+
+#: variable.c:1602
+msgid "default"
+msgstr "baku"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "lingkungan"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "lingkungan dibawah opsi -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "baris perintah"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "'override' direktif"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (dari '%s', baris %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statistik variable set hash-table:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variabel\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Nilai Variabel Pola-Spesifik"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Tidak terdapat nilai variabel pola-spesifik"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u nilai variabel pola-spesifik"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "peringatan: variabel '%.*s' tidak terdefinisi"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() gagal dengan kode %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Peringatan: redirection kosong\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "kesalahan internal: '%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-warning, kamu mungkin telah mengaktifkan pengontrolan CTRL-Y dari DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BAWAAN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BAWAAN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BAWAAN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Perintah bawaan '%s' tidak diketahui\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Error, perintah kosong\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Meneruskan masukan dari %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Meneruskan error ke %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Meneruskan output ke %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Meneruskan output ke %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Append %.*s and cleanup\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Menjalankan perintah %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Gagal spawning, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH Jalur Pencarian\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Tidak ada 'vpath' dalam jalur pencarian."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u 'vpath' jalur pencarian.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Tidak ada ('VPATH' variabel) umum dalam jalur pencarian."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Jalur pencarian umum untuk variabel 'VPATH':\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "internal error: opsi --sync-mutex lebih dari satu"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "internal error: opsi --jobserver-fds lebih dari satu"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "Kehabisan memori maya"
+
+#~ msgid "write error"
+#~ msgstr "error menulis"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BAWAAN RM %s\n"
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Nilai yang salah dalam anggota `update_status' !"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Error 0x%x (diabaikan)"
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() gagal untuk menjalankan proses (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sIni adalah piranti lunak bebas; lihat kode program untuk syarat "
+#~ "penyalinan.\n"
+#~ "%sTIDAK TERDAPAT GARANSI; bahkan untuk PENJUALAN atau \n"
+#~ "%sKESESUAIAN UNTUK TUJUAN TERTENTU.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "kelebihan `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "directive `override' kosong"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "directive `override' tidak valid"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s # of strings in strcache: %d\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%s # dari string dalam strcache: %d\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-warning, CTRL-Y akan meninggalkan sub-process(es).\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Tidak terdapat files."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u files dalam %u hash buckets.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr ""
+#~ "# rata - rata %.3f files per bucket, maksimal %u files dalam satu "
+#~ "bucket.\n"
+
+#~ msgid "the `word' function takes a positive index argument"
+#~ msgstr "fungsi `word' mengambil sebuah argumen index yang positif"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Sintak error, masih didalam '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Mendapat sinyal SIGCHLD; %u unreaped childern.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DIREKTORI"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "Pindah ke DIRECTORY sebelum melakukan sesuatu."
+
+#~ msgid "FLAGS"
+#~ msgstr "FLAGS"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Proses dihentikan untuk memberikan kesempatan debugger"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "Variabel environment digunakan dalam makefiles"
+
+#~ msgid "FILE"
+#~ msgstr "FILE"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "Baca FILE sebagai sebuah makefile"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "Cari DIREKTORI untuk makefiles yang dibutuhkan"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "Tidak melakukan banyak jobs jika beban lebih dari N."
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr ""
+#~ "Jangan menjalankan perintah apapun. Hanya tampilkan saja apa yang akan "
+#~ "dilakukan"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr ""
+#~ "Anggap FILE sudah sangat tua dan jangan dibuat kembali file tersebut"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "Jangan menampilkan perintah yang dijalankan"
+
+#~ msgid "Turns off -k"
+#~ msgstr "Matikan opsi -k"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "Pertimbangkan FILE sebagai file yang baru."
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Jangan menspesifikasi -j atau --jobs jika sh.exe tidak ada."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Mereset kembali make pada mode job tunggal."
+
+#~ msgid "Entering"
+#~ msgstr "Memasuki"
+
+#~ msgid "Leaving"
+#~ msgstr "Meninggalkan"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "tidak terdapat nama file untuk `%s include'"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "target `%s' meninggalkan persyaratan pola kosong"
+
+#~ msgid "# No variables."
+#~ msgstr "# Tidak ada variabel."
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr ""
+#~ "# rata - rata dari %.1f variabel per bucket, maksimal %u dalam satu "
+#~ "bucket.\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr ""
+#~ "# rata - rata dari %d.%d variabel per bucket, maksimal %u dalam satu "
+#~ "bucket.\n"
diff --git a/po/insert-header.sin b/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/it.gmo b/po/it.gmo
new file mode 100644
index 0000000..dd76258
--- /dev/null
+++ b/po/it.gmo
diff --git a/po/it.po b/po/it.po
new file mode 100644
index 0000000..6502255
--- /dev/null
+++ b/po/it.po
@@ -0,0 +1,2330 @@
+# Italian messages for GNU make.
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Francesco Groccia <frgroccia@gmail.com>, 2010-2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-11 14:58+0200\n"
+"Last-Translator: Francesco Groccia <frgroccia@gmail.com>\n"
+"Language-Team: Italian <tp@lists.linux.it>\n"
+"Language: it\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "tentativo di usare una funzionalità non supportata: \"%s\""
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "touch del membro di archivio non disponibile su VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: l'archivio \"%s\" non esiste"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: \"%s\" non è un archivio valido"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: il membro \"%s\" non esiste in \"%s\""
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: codice di uscita errato da ar_member_touch su \"%s\""
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"lbr$set_module() non è riuscita a estrarre informazioni sul modulo, stato = "
+"%d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() non riuscita con lo stato = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "impossibile aprire la libreria \"%s\" per cercare il membro \"%s\""
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Membro \"%s\"%s: %ld byte a %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (il nome potrebbe essere troncato)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Data %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modo = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Il set di istruzioni ha troppe righe (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Interruzione.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** [%s] Il membro di archivio \"%s\" potrebbe essere inesistente; non "
+"eliminato"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+"*** Il membro di archivio \"%s\" potrebbe essere inesistente; non eliminato"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Eliminazione del file \"%s\""
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Eliminazione del file \"%s\""
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  set di istruzioni da eseguire"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (comando interno):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (da \"%s\", riga %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Directory\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: impossibile eseguire stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (key %s, mtime %d) non può essere aperto.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (device %d, inode [%d,%d,%d]) non può essere aperto.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (device %ld, inode %ld) non può essere aperto.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (key %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (device %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (device %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "No"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " file, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "no"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " impossibilità"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " finora."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " impossibilità nelle directory %lu.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "La variabile ricorsiva \"%s\" si autoreferenzia (alla fine)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "riferimento alla variabile non terminato"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "È stato specificato un set di istruzioni per il file \"%s\" a %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"È stato trovato un set di istruzioni per il file \"%s\" mediante una regola "
+"di ricerca implicita,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "ma ora \"%s\" viene considerato lo stesso file di \"%s\"."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Il set di istruzioni per \"%s\" verrà ignorato in favore di quello per \"%s"
+"\"."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"impossibile rinominare la regola \"due punti\" \"%s\" con la regola \"doppio "
+"due punti\" \"%s\""
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"impossibile rinominare la regola \"doppio due punti\" \"%s\" con la regola "
+"\"due punti\" \"%s\""
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Eliminazione del file intermedio \"%s\""
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Rimozione dei file intermedi...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Ora corrente"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: intervallo errato per la marcatura temporale; sostituzione di %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Non è un obiettivo:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  File \"precious\" (prerequisito di .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Obiettivo \"phony\" (prerequisito di .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Obiettivo a riga di comando."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "# Un makefile predefinito, da MAKEFILES, o da -include/sinclude."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Regola incorporata"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Regola di ricerca implicita completata."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Regola di ricerca implicita non completata."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Stem implicito/statico del modello: \"%s\"\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Il file è un prerequisito intermedio."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Inoltre, genera:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Ora di modifica mai controllata."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Il file non esiste."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Il file è molto vecchio."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Ultima modifica %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Il file è stato aggiornato."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Il file non è stato aggiornato."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Set di istruzioni attualmente in esecuzione (QUESTO È UN BUG)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Dipendenze del set di istruzioni in esecuzione (QUESTO È UN BUG)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Aggiornato con successo."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Richiede di essere aggiornato (-q è impostato)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Aggiornamento non riuscito."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Valore illecito nel membro \"command_state\"!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# File"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# statistiche tabella hash dei file:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Campo \"%s\" non memorizzato: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "primo argomento non numerico per la funzione \"word\""
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "il primo argomento per la funzione \"word\" deve essere maggiore di 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "primo argomento non numerico per la funzione \"wordlist\""
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "secondo argomento non numerico per la funzione \"wordlist\""
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) non riuscita (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_open_pipe: DuplicateHandle(Err) non riuscita (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() non riuscita (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() non riuscita\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Pulitura del file batch temporaneo %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "apertura: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "scrittura: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Operazione sui file non valida: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "numero di argomenti non sufficienti (%d) per la funzione \"%s\""
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "non implementata su questa piattaforma: funzione \"%s\""
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "chiamata non terminata alla funzione \"%s\": \"%c\" mancante"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Nome della funzione vuoto\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Nome della funzione non valido: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Nome della funzione troppo lungo: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "numero di argomenti non sufficienti (%d) per la funzione \"%s\"\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "numero di argomenti non sufficienti (%d) per la funzione \"%s\"\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: l'opzione \"%s\" è ambigua\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: l'opzione \"--%s\" non ammette argomenti\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: l'opzione \"%c%s\" non ammette argomenti\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: l'opzione \"%s\" richiede un argomento\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: opzione \"--%s\" sconosciuta\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: opzione \"%c%s\" sconosciuta\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opzione illecita -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: opzione illecita -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: l'opzione richiede un argomento -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: l'opzione \"-W %s\" è ambigua\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: l'opzione \"-W %s\" non ammette argomenti\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Espansione di \"%s\"\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Valutazione di \"%s\"\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "impossibile allocare %lu byte per la tabella hash: memoria esaurita"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Carico=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Collisioni=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Ricerca di una regola implicita per \"%s\".\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+"Ricerca di una regola implicita per il membro di archivio per \"%s\".\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Evitata la ricorsione della regola implicita.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Stem troppo lungo: \"%.*s\".\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Tentativo di usare la regola del modello con stem \"%.*s\".\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Prerequisito impossibile \"%s\" della regola rifiutato.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Prerequisito implicito impossibile \"%s\" rifiutato.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Tentativo di usare il prerequisito della regola \"%s\".\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Tentativo di usare il prerequisito implicito \"%s\".\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Trovato il prerequisito \"%s\" come VPATH \"%s\"\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Ricerca di una regola con il file intermedio \"%s\".\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Impossibile creare un file temporaneo\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (creato dump del core)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignorato)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<incorporato>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: set di istruzioni per l'obiettivo \"%s\" non riuscito"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Errore %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Errore 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Attesa per i processi non terminati...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Processo figlio vivo %p (%s) con PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (remoto)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Interruzione del processo figlio perdente %p con PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Interruzione del processo figlio vincente %p con PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Pulitura del file batch temporaneo %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Pulitura del file batch temporaneo %s non riuscita (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ""
+"Rimozione del processo figlio %p con PID %s%s dalla catena di esecuzione.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "rilascio del semaforo del jobserver: (Errore %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Token rilasciato per il processo figlio %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "scrittura del jobserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() non riuscita all'avvio del processo (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Contati %d argomenti nell'avvio fallito\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ""
+"Inserimento del processo figlio %p (%s) con PID %s%s nella catena di "
+"esecuzione.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "attendere semaforo o processo figlio (Errore %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Token ottenuto per il processo figlio %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "lettura della pipe dei processi"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: l'obbiettivo \"%s\" non esiste"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: aggiorna l'obbiettivo \"%s\" a causa di: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+"impossibile far rispettare i limiti di carico su questo sistema operativo"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "impossibile far rispettare il limite di carico: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"nessun'altra gestione del file: impossibile duplicare lo standard input\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"nessun'altra gestione del file: impossibile duplicare lo standard output\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"nessun'altra gestione del file: impossibile duplicare lo standard error\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Impossibile ripristinare lo standard input\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Impossibile ripristinare lo standard output\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Impossibile ripristinare lo standard error\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"make ha interrotto il processo figlio con pid %s, è ancora in attesa del "
+"processo con pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: comando non trovato"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: shell non trovata"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: lo spazio dell'ambiente potrebbe essere esaurito"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL cambiata (era \"%s\", adesso è \"%s\")\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Creazione del file batch temporaneo %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Contenuti del file batch:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Contenuti del file batch:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (riga %d) contesto della shell errato (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[TIPO] (--output-sync[=TIPO]) non è configurato per questa versione."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Apertura della tabella dei simboli globale non riuscita: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "L'oggetto caricato %s non è dichiarato compatibile con la licenza GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Caricamento del simbolo %s da %s non riuscito: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Nome del simbolo vuoto per il caricamento: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Caricamento del simbolo %s da %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "L'operazione \"load\" non è supportata su questa piattaforma."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opzioni:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignorato per compatibilità.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Genera tutti gli obiettivi "
+"incondizionatamente.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Cambia DIRECTORY prima di fare qualunque "
+"cosa.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Mostra molte informazioni di debug.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAGS]             Mostra diversi tipi di informazioni di debug.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Le variabili ambiente sovrascrivono i "
+"makefile.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=TESTO               Analizza STRINGA come estratta dal makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Legge FILE come un makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Mostra questo messaggio ed esce.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Ignora gli errori dai set di istruzioni.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Cerca nella DIRECTORY per i makefile inclusi.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Permette N processi alla volta; infiniti se "
+"non viene specificato l'argomento.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Continua l'esecuzione quando non è possibile "
+"creare alcuni obiettivi.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Non avvia processi multipli a meno che il "
+"carico di lavoro non sia sotto N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Usa il più recente mtime tra i collegamenti "
+"simbolici e l'obiettivo.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Non esegue alcun set di istruzioni; lo stampa "
+"solamente.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Considera il FILE come molto vecchio e non "
+"riesegue make.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TIPO], --output-sync[=TIPO]\n"
+"                              Sincronizza l'output dei processi paralleli "
+"dal TIPO.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Stampa il database interno di make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Non avvia alcun set di istruzioni; lo stato di "
+"uscita indica se è aggiornato.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Disabilita le regole implicite interne.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Disabilita le impostazioni delle variabili "
+"interne.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Non visualizza i set di istruzioni.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                            Disattiva l'opzione -k.\n"
+
+# ## touch = in questo contesto è simile alla funzione del comando 'touch'
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Esegue il touch degli obiettivi invece di "
+"ricrearli.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Stampa informazioni di tracciamento.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Stampa il numero di versione di make ed esce.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Stampa la directory corrente.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Disattiva l'opzione -w, anche se era stata "
+"attivata implicitamente.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Considera il FILE come nuovo di zecca.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Avvisa quando viene referenziata una variabile "
+"non definita.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "una stringa vuota non è valida come nome di file"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "livello di debug specificato sconosciuto \"%s\""
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "tipo di output-sync (sincronizzazione dell'output) sconosciuto \"%s\""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+"%s: catturata una interruzione/eccezione (codice = 0x%lx, indirizzo = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filtro eccezione non gestita chiamata dal programma %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Violazione accesso: operazione di scrittura all'indirizzo 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Violazione accesso: operazione di lettura all'indirizzo 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() impostazione default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"find_and_set_shell() impostazione del percorso di ricerca default_shell = "
+"%s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s viene sospeso per 30 secondi..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) eseguito. Continuazione.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"errore interno: impossibile aprire il semaforo del jobserver \"%s\": (Errore "
+"%ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Client del jobserver (semaforo %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "errore interno: stringa illecita per --jobserver-fds \"%s\""
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Client del jobserver (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"attenzione: -jN forzata nel submake: disattivazione della modalità jobserver."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "jobserver duplicato"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"attenzione: jobserver non disponibile, viene usato -j1. Aggiungere \"+\" "
+"alla regola make superiore."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Il Makefile dallo standard input è stato specificato due volte."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (file temporaneo)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (file temporaneo)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "I processi paralleli (-j) non sono supportati su questa piattaforma."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Reimpostazione alla modalità a singolo processo (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Slot del jobserver limitati a %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "Creazione del semaforo del jobserver: (Errore %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "creazione della pipe dei processi"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inizializzazione nella pipe della modalità jobserver"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Collegamenti simbolici non supportati: opzione -L disabilitata."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Aggiornamento dei makefile....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+"Il makefile \"%s\" potrebbe entrare in un ciclo all'infinito; make non "
+"rieseguito.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Riesecuzione del makefile \"%s\" non riuscita."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Il makefile \"%s\" incluso non è stato trovato."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Il makefile \"%s\" non è stato trovato"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Impossibile ritornare alla directory originale."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Riesecuzione[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (file temporaneo): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL contiene più di un obiettivo"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nessun obiettivo specificato e nessun makefile trovato"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Nessun obiettivo"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Aggiornamento degli obiettivi....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"attenzione: rilevato un tempo alterato. La creazione potrebbe essere "
+"incompleta."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Uso: %s [opzioni] [obiettivo] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Questo programma è stato compilato per %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Questo programma è stato compilato per %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Segnalare i bug a <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "l'opzione \"%s%s\" richiede un argomento stringa non vuoto"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "l'opzione \"-%c\" richiede un argomento intero positivo"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sCompilato per %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sCompilato per %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%s Licenza GPLv3+: GNU GPL versione 3 o successiva <http://gnu.org/licenses/"
+"gpl.html>.\n"
+"%s Questo programma è software libero: siete liberi di modificarlo e "
+"ridistribuirlo.\n"
+"%s Non c'è ALCUNA GARANZIA, per quanto consentito dalle vigenti normative.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Generazione del database delle informazioni, creato il %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Generazione del database completata il %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Errore %d sconosciuto"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: utente %lu (reale %lu), gruppo %lu (reale %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Accesso inizializzato"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Accesso utente"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Accesso make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Accesso processo figlio"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: ingresso in una directory sconosciuta\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: uscita dalla directory sconosciuta\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: ingresso nella directory \"%s\"\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: uscita dalla directory \"%s\"\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: ingresso in una directory sconosciuta\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: uscita dalla directory sconosciuta\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: ingresso nella directory \"%s\"\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: uscita dalla directory \"%s\"\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "errore in scrittura: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Arresto.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Lettura dei makefile...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Lettura del makefile \"%s\""
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (nessun obiettivo predefinito)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (percorso di ricerca)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (ignora)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (nessuna espansione per \"~\")"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "UTF-8 BOM nel makefile \"%s\" saltato\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "UTF-8 BOM nel makefile buffer saltato\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "sintassi illecita nel condizionale"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: caricamento non riuscito"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "il set di istruzioni inizia prima del primo obiettivo"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "regola mancante prima del set di istruzioni"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (si intendeva TAB invece di 8 spazi?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "separatore %s mancante"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "modello mancante per l'obiettivo"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "modelli multipli per l'obiettivo"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "il modello dell'obiettivo non contiene alcun \"%%\""
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "\"endif\" mancante"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nome vuoto della variabile"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "testo non pertinente dopo la direttiva \"define\""
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "\"endef\" mancante, \"define\" non terminato"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "testo non pertinente dopo la direttiva \"endef\""
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "testo non pertinente dopo la direttiva \"%s\""
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "\"%s\" non pertinente"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "un solo \"else\" per condizionale"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Definizione malformata della variabile specifica per l'obiettivo"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "i prerequisiti non possono essere definiti nei set di istruzioni"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "regole del modello implicite e statiche miste"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "regole implicite e normali miste"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr ""
+"il \"%s\" dell'obiettivo non corrisponde al modello dell'obiettivo stesso"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "Il file dell'obiettivo \"%s\" contiene sia : che ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ""
+"l'obiettivo \"%s\" è stato fornito più di una volta nella stessa regola"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+"attenzione: sovrascrittura del set di istruzioni per l'obiettivo \"%s\""
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+"attenzione: ignorato il set di istruzioni obsoleto per l'obiettivo \"%s\""
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "regole implicite e normali miste"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+"attenzione: è stato rilevato il carattere NUL; il resto della riga viene "
+"ignorato"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Nessuna operazione da eseguire per \"%s\"."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "\"%s\" è aggiornato."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Pulizia del file \"%s\".\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%s Nessuna regola per generare l'obiettivo \"%s\", necessario per \"%s\"%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s Nessuna regola per generare l'obiettivo \"%s\"%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Considerato il file obiettivo \"%s\".\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Tentativo recente di aggiornamento del file \"%s\" non riuscito.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Il file \"%s\" è già stato esaminato.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "L'aggiornamento del file \"%s\" è ancora in corso.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Aggiornamento del file \"%s\" terminato.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Il file \"%s\" non esiste.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Attenzione: il file .LOW_RESOLUTION_TIME \"%s\" ha una marcatura "
+"temporale ad alta risoluzione"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Trovata una regola implicita per \"%s\".\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Nessuna regola implicita trovata per \"%s\".\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Uso del set di istruzioni predefinito per \"%s\".\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Dipendenza circolare %s <- %s scartata."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Prerequisiti del file obiettivo \"%s\" terminati.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Generazione dei prerequisiti di \"%s\" in corso.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Abbandono sul file obiettivo \"%s\".\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "L'obiettivo \"%s\" non è stato rigenerato a causa di errori."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Il prerequisito \"%s\" è solo per l'obiettivo \"%s\".\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Il prerequisito \"%s\" dell'obiettivo \"%s\" non esiste.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Il prerequisito \"%s\" è più nuovo di quello dell'obiettivo \"%s\".\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ""
+"Il prerequisito \"%s\" è più vecchio di quello dell'obiettivo \"%s\".\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+"L'obiettivo \"%s\" è \"doppio due punti\" e non ha alcun prerequisito.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+"Nessun set di istruzioni per \"%s\" e nessun prerequisito effettivamente "
+"cambiato.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Generazione di \"%s\" a causa del flag \"always-make\".\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Non è necessario rigenerare l'obiettivo \"%s\""
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; uso del nome VPATH \"%s\""
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "L'obiettivo \"%s\" deve essere rigenerato.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  nome VPATH \"%s\" ignorato.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Esecuzione del set di istruzioni per \"%s\" in corso.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Rigenerazione del file obiettivo \"%s\" non riuscita.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "File obiettivo \"%s\" rigenerato correttamente.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+"Il file obiettivo \"%s\" necessita di essere rigenerato con l'opzione -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Uso dei comandi predefiniti per \"%s\".\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Attenzione: il file \"%s\" ha un orario di modifica nel futuro"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Attenzione: il file \"%s\" ha un orario di modifica %s nel futuro"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "l'elemento .LIBPATTERNS \"%s\" non è un modello"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Le personalizzazioni non verranno esportate: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Regole implicite"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Regole non implicite."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u regole implicite, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminale."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "BUG: num_pattern_rules è errato!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "segnale sconosciuto"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Chiusura"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interruzione"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Uscita (con core dump)"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Istruzione illecita"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Rilevato trace/breakpoint"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Annullato"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Rilevato IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Rilevato EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Eccezione in virgola mobile"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Ucciso"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Errore di bus"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Errore di segmentazione"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Chiamata di sistema errata"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Pipe interrotta"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Sveglia"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Terminato"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Segnale 1 definito dall'utente"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Segnale 2 definito dall'utente"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Processo figlio uscito"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Mancanza di alimentazione elettrica"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Fermato (da terminale)"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Fermato (input tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Fermato (output tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Fermato"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Limite di tempo CPU superato"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Superato il limite di dimensione file"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Timer virtuale terminato"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Timer di profiling terminato"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Finestra modificata"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Continuato"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Condizioni di I/O urgente"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O consentito"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Risorsa persa"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Segnale di pericolo"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Richiesta informazioni"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Co-processore a virgola mobile non disponibile"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s buffer strcache assenti\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s buffer strcache: %lu (%lu) / stringhe = %lu / memorizzazione = %lu B / "
+"media = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s buffer corrente: dimensione = %hu B / usato = %hu B / count = %hu / media "
+"= %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s altra usata: totale = %lu B / count = %lu / media = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s altra libera: totale = %lu B / max = %lu B / min = %lu B / media = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s prestazioni strcache: lookups = %lu / hit rate = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# statistiche della tabella hash:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatico"
+
+#: variable.c:1602
+msgid "default"
+msgstr "predefinito"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "ambiente"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "ambiente con l'opzione -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "riga di comando"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "direttiva \"override\""
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (da \"%s\", riga %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statistiche tabella di hash del set di variabili:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variabili\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Valori di variabile non specifici per il modello."
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Nessun valore per la variabile \"pattern-specific\"."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u valori di variabile specifici per il modello."
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "attenzione: variabile \"%.*s\" non definita"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() non riuscita con %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Attenzione: redirezione vuota\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "errore interno: command_state \"%s\""
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-attenzione, potrebbe essere necessario riabilitare la gestione di CTRL+Y da "
+"DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "[%s] INTERNO [%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "CD INTERNO %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "CD INTERNO %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Comando interno \"%s\" sconosciuto\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Errore, comando vuoto\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Input rediretto da %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Errore rediretto a %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Accoda output a %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Output rediretto a %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Accoda %.*s e pulisce\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Verrà invece eseguito %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Errore nella generazione, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Percorsi di ricerca VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Percorsi di ricerca \"vpath\" assenti."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u 'vpath' percorsi di ricerca.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Percorso di ricerca non generale (variabile \"VPATH\")."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Percorso di ricerca generale (variabile \"VPATH\"):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "errore interno: opzioni multiple per --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "errore interno: opzioni multiple per --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "memoria virtuale esaurita"
+
+#~ msgid "write error"
+#~ msgstr "errore in scrittura"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "RM INTERNO %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  Valore illecito nel membro \"update_status\"!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "modo di tracciamento \"%s\" sconosciuto"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Errore 0x%x (ignorato)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr ""
+#~ "Chiamata del set di istruzioni da %s:%lu per aggiornare l'obiettivo \"%s"
+#~ "\".\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr ""
+#~ "Chiamata del set di istruzioni interno per aggiornare l'obiettivo \"%s"
+#~ "\".\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # di buffer strcache: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# statistiche tabella hash di strcache:\n"
+#~ "# "
diff --git a/po/ja.gmo b/po/ja.gmo
new file mode 100644
index 0000000..f79bcbd
--- /dev/null
+++ b/po/ja.gmo
diff --git a/po/ja.po b/po/ja.po
new file mode 100644
index 0000000..355e30d
--- /dev/null
+++ b/po/ja.po
@@ -0,0 +1,2330 @@
+# Japanese message catalog for make 4.0
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Daisuke Yamashita <yamad@mb.infoweb.ne.jp>, 2001.
+#             Thanks to NISHIJIMA Takanori
+# GOTO Masanori <gotom@debian.or.jp>, 2003-2004.
+# Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>, 2011, 2014
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2014-05-03 23:00+0900\n"
+"Last-Translator: Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>\n"
+"Language-Team: Japanese <translation-team-ja@lists.sourceforge.net>\n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Poedit-Basepath: /factory/ja-po/make/make-4.0\n"
+"X-Generator: Poedit 1.5.4\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "サ�ート�れ����機能を使��������: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "VMS ��書庫�メン�を touch �る機能��り��ん"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: 書庫 '%s' ��り��ん"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "'%s' �有効�書庫���り��ん"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: メン� '%s' � '%s' 内�存在���ん"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: '%s' �� ar_member_touch �ら異常�値�返り���"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() �モジュール情報�抽出�失敗����. 状態 = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() �失敗����. 状態 = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "ライブラリ '%s' を開�����, メン� '%s' �検索�����ん"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "メン� '%s'%s: %ld �イト at %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (���切り詰�られ��も)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  日付 %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "レシピ�行数�多���� (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** 中断.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] 書庫�メン� '%s' �多分�物�� ― 削除���ん���"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** 書庫�メン� '%s' �多分�物�� ― 削除���ん���"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] ファイル '%s'　を削除���"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** ファイル '%s'　を削除���"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  実行�るレシピ"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (ビルトイン):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (ファイル '%s', %lu 行目):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# ディレクトリ\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: 状態を調�られ��ん���.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (key %s, mtime %d): 開���ん���.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (device %d, inode [%d,%d,%d]): 開���ん���.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (device %ld, inode %ld): 開���ん���.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (key %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (device %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (device %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "0"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " 個�ファイル, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "0"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " 個��用�能ファイル�"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " (�����)."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " 個��用�能ファイル� (%lu 個�ディレクトリ内).\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "�帰的変数 '%s' �(最終的�)�れ自身を�照�����"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "終端���変数�照"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "ファイル '%s' �����レシピ� %s:%lu �指定�れ���,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "ファイル '%s' ����レシピ�暗黙ルール�探索�見��り���,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "���今� '%s' � '%s' ���ファイル�見��れ��."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "'%s' ����レシピ�, '%s' ����も�を優先�る��無視�れ��."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "シングルコロン '%s' �らダブルコロン '%s' ���を変�られ��ん"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "ダブルコロン '%s' �らシングルコロン '%s' ���を変�られ��ん"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** 中間ファイル '%s'　を削除���"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "中間ファイルを削除�����...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "�在時刻"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: タイムスタンプ�範囲外�� -- 代り� %s ����"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# ターゲット���り��ん:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  特別扱��ファイル (.PRECIOUS �必��件)"
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  疑似ターゲット (.PHONY �必��件)"
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  コマンドラインターゲット."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  デフォルト��� MAKEFILES, -include/sinclude Makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "# ビルトインルール"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  暗黙ルール�探索�行�れ���."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  暗黙ルール�探索�行�れ��ん���."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  暗黙/�的パターン語幹: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  ファイル�中間必��件��."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  �ら� make:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  修正時刻��ェック�れる����り��ん."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  ファイル�存在���ん."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  ファイル��常�����."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  最終修正 %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  ファイル�更新�れ����."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  ファイル�更新�れ����ん."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  レシピを�在実行中�� (*�れ��グ��*)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  �存関係レシピを実行中�� (*�れ��グ��*)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  更新��功����."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  更新�必��� (-q �セット�れ����)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  更新�失敗����."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  'command_state' メン��無効�値��!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# ファイル"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# ファイル�ッシュテーブル�状態:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: フィールド '%s' �キャッシュ�れ����ん: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "�数値�第1引数� 'word' 関数�与�られ���"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "'word' 関数��第1引数� 0 より大����れ��り��ん"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "�数値�第1引数� 'wordlist' 関数�与�られ���"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "�数値�第2引数� 'wordlist' 関数�与�られ���"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) �失敗 (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) �失敗 (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() �失敗 (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): process_init_fd() �失敗\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "一時的��ッ�ファイル %s を消去���\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "write: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "無効�ファイル�作: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "引数�数(%d)�関数 '%s' ������分��"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "��プラットフォーム��実装�れ����ん: 関数 '%s'"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "終端���関数呼�出� '%s': '%c' ��り��ん"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "空�関数�\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "無効�関数�: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "関数��長����: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "引数個数指定（最�値;%d）�無効��: 関数 '%s'\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "引数個数指定（最大値;%d）�無効��: 関数 '%s'\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: オプション '%s' �短���正��判別����ん\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: オプション '--%s' �引数を�る�������ん\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: オプション '%c%s' �引数を�る�������ん\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: オプション '%s' ��引数�1�必���\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: オプション '--%s' を�識����ん\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: オプション '%c%s' を�識����ん\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: �正�オプション ― %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: 無効�オプション ― %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: オプション��引数�必��� ― %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: オプション '-W %s' �短���正��判別����ん\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: オプション '-W %s' �引数を�る�������ん\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: 展開中 '%s'\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: 評価中 '%s'\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"�ッシュテーブル用 %lu �イト�割り当��失敗����: メモリを使�果����"
+"�"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Load=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Collisions=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "'%s' ����暗黙ルールを探���.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "'%s' ����書庫メン�暗黙ルールを探���.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "暗黙ルール��帰を回����.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "語幹�長����: '%.*s'.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "語幹 '%.*s' ��パターンルールを試���.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "�用�能�ルール�必��件 '%s' を�下���.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "�用�能�暗黙�必��件 '%s' を�下���.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "ルール�必��件 '%s' を試���.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "暗黙�必��件 '%s' を試���.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "VPATH '%2$s' ���必��件 '%1$s' を見�����\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "中間ファイル '%s' �ルールを探���.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "一時ファイルを作�����ん\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (コアダンプ����)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (無視�れ���)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<ビルトイン>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: ターゲット '%s' �レシピ�失敗����"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] エラー %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] エラー 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** 未完了�ジョブを待�����...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "生存�プロセス %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (リモート)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "失敗���プロセス %p PID %s %s を回����\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "�功���プロセス %p PID %s %s を回����\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "一時的��ッ�ファイル %s を消去���\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "一時的��ッ�ファイル %s �消去�失敗����(%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "�ェイン�ら�プロセス %p PID %s%s を削除���.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "ジョブサー��セマフォを解放���: (エラー %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "�プロセス %p (%s) ��を解放����.\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "ジョブサー��� write"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() �失敗�プロセス�起動����ん��� (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"起動�失敗� %d 個�引数�カウント�れ���\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "�ェイン��プロセス %p (%s) PID %s%s を�り込����.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "セマフォ ��� �プロセスを待�����: (エラー %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "�プロセス %p (%s) ��を�����.\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "ジョブ�パイプ� read"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: ターゲット '%s' �存在���ん"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: ターゲット '%s' を %s ����更新���"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "��オペレーティングシステム��システム負�制�を加�られ��ん"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "システム負�制�を課��������ん���: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "ファイル�ンドルを使�尽�����: 標準入力を複製����ん\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "ファイル�ンドルを使�尽�����: 標準出力を複製����ん\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "ファイル�ンドルを使�尽�����: 標準エラー出力を複製����ん\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "標準入力を復元����ん���\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "標準出力を復元����ん���\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "標準エラー出力を復元����ん���\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make � pid %s ��プロセスを回��, pid %s を待�続���\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: コマンド�見��り��ん���"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: シェルプログラム�見��り��ん���"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe:環境設定����メモリを使�尽���も�れ��ん"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL �変更�れ��� (�� '%s', 今� '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "一時的��ッ�ファイル %s を作����\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"�ッ�ファイル�内容:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"�ッ�ファイル�内容 :%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (%d 行目) �正�シェルコンテキスト (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "��ビルド�� -O[TYPE] (--output-sync[=TYPE]) �設定�れ����ん."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "グロー�ルシンボルテーブルを開��������ん: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "読�込ん�オブジェクト %s � GPL互��宣言���れ����ん"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "シンボル %s を %s　�ら読�込む��失敗����: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "空�シンボル�を読�込も�������: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "シンボル %s を %s �ら読�込ん����\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "'load' 命令���プラットフォーム�サ�ート�れ��ん."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "オプション:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      互�性����も��, 無視�れる.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           無�件�全ターゲットを make �る.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              make 開始��ディレクトリ DIRECTORY �移動�"
+"ã‚‹.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          デ�ッグ情報を大��表示�る.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr "  --debug[=FLAGS]             様々�タイプ�デ�ッグ情報を表示�る.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              環境変数� makefile 中�記述�優先�る\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr "  --eval=STRING               STRING を makefile �文���評価�る.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              FILE を makefile ���読�込む\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  ��メッセージを表示��終了�る.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         レシピ�ら返��エラーを無視�る.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+"                              インクルード�る makefile を探索�る "
+"DIRECTORY.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          一度� N 個���ジョブを許�; 無引数��ジョブ"
+"数制���.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            �るターゲット� make �����も実行を続�"
+"ã‚‹.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              負� � N 未満����り複数�ジョブを開始��"
+"�.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   シンボリックリンク�ターゲット�中�一番新�� "
+"mtime を使�.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              レシピを実際�実行���; 表示�る��.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              FILE を��も��も��見���, � make ��"
+"�.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              並列ジョブ�出力を TYPE ���る.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       make �内部データベースを表示�る.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              レシピを実行���; 更新済��る����を終了"
+"ステータス�通知.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      ビルトイン�暗黙ルールを無効��る.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  ビルトイン�変数設定を無効��る.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       レシピを表示���.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              -k オプションをオフ��る.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 ターゲットを� make �る代�り�タッ��る.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     トレース情報を表示�る.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               make ��ージョン番�を表示��終了�る.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       カレントディレクトリを表示�る.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        -w をオフ��る. 暗黙�有効�場��もオフ��"
+"ã‚‹.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              FILE を���も最新���見��.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  未定義�変数��照�れ����警告を発�る.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "空�文字列�ファイル�����無効��"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "�明�デ�ッグレベル指定 '%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "未知�出力�期型 '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: 割り込�/例外を������ (code = 0x%lx, addr = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"処��れ��例外����フィルタ�プログラム %s �ら呼�れ���\n"
+"例外コード = %lx\n"
+"例外フラグ = %lx\n"
+"例外アドレス = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "アクセス�護��: アドレス 0x%p ��書�込��作\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "アクセス�護��: アドレス 0x%p ��読�込��作\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() � default_shell = %s �設定���\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() パス探索� default_shell = %s �セット����\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s � 30 秒間�止���..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) �終�り���. 続���.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr "内部エラー: ジョブサー� セマフォを開���ん '%s': (エラー %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "jobserver クライアント (セマフォ %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "内部エラー: 無効� --jobserver-fds 文字列 '%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "jobserver クライアント (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"警告: 副次 make � -jN を強制指定����: jobserver モードを無効����."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"警告: jobserver �利用��: 今回� -j1 を使���. 親 make ルール� `+' を追"
+"加���ょ�."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "標準入力�ら� makefile �二回指定�れ���."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (一時ファイル)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (一時ファイル)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "並列ジョブ (-j) ���プラットフォーム�サ�ート�れ��ん."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "�一ジョブ (-j1) モード�リセット���."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "jobserver �スロット� %d ����\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "ジョブサー� セマフォを作������: (エラー %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "ジョブパイプ作�中"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "jobserver パイプ��期化"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "シンボリックリンク�サ�ート�れ����ん: -L �無効��."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "makefile �更新中....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "makefile '%s' 自己�帰���れ�り ― �make ���ん.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "makefile '%s' ��make�失敗����."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "インクルード�れる makefile '%s' �見��り��ん���."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "makefile '%s' �見��り��ん���"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "元�ディレクトリ�戻れ��ん���."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "�実行���[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (一時ファイル): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL �二�以上�ターゲットを�ん����"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "ターゲット�指定�れ��ら�, makefile も見��り��ん"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "ターゲット��り��ん"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "最終ターゲットを更新中....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "警告:  時刻��れを検出. �完全�ビルド�果��る�も�れ��ん."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "使�方: %s [オプション] [ターゲット] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"��プログラム� %s 用�ビルド�れ���\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"��プログラム� %s (%s) 用�ビルド�れ���\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "�グレ�ート� <bug-make@gnu.org> ��.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "'%s%s' オプション�空���文字列引数を�求���"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "'-%c' オプション�正�整数引数を�求���"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%s��プログラム� %s 用�ビルド�れ���\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%s��プログラム� %s (%s) 用�ビルド�れ���\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sライセンス GPLv3+: GNU GPL �ージョン 3 以� <http://gnu.org/licenses/gpl."
+"html>\n"
+"%s�れ�フリーソフトウェア��: 自由�変更�よ��布����.\n"
+"%s法律�許��り�　無�証　��.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make データベース出力 %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Make データベース終了 %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "未知�エラー %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: ユーザ %lu (実効 %lu), グループ %lu (実効 %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "アクセス権�を�期化"
+
+#: misc.c:622
+msgid "User access"
+msgstr "ユーザアクセス"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "make アクセス"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "�プロセスアクセス"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: ディレクトリ(ディレクトリ��明)�入り��\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: ディレクトリ(ディレクトリ��明)�ら出��\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: ディレクトリ '%s'　�入り��\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: ディレクトリ '%s' �ら出��\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: ディレクトリ(ディレクトリ��明)�入り��\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: ディレクトリ(ディレクトリ��明)�ら出��\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: ディレクトリ '%s' �入り��\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: ディレクトリ '%s' �ら出��\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "書�込�エラー: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  中止.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "makefile を読�込���...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "makefile '%s' �読�込�中"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (デフォルト�最終ターゲット��り��ん)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (探索パス)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (気�����よ�)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (~ �展開��)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "makefile '%s' �中� UTF-8 BOM をスキップ���\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "makefile �ッファ�中� UTF-8 BOM をスキップ���\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "�件部�文法�無効��"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: 読�込��失敗����"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "最��ターゲットより��レシピ��り��"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "レシピ���ルール��足�����"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (8 個�空白����, TAB ��もり����?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "分離記�を欠�����%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "ターゲットパターンを欠�����"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "複数�ターゲットパターン��"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "ターゲットパターン� '%%' を�ん����ん"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "'endif'　�欠������"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "空�変数�"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "'define' 疑似命令�後��無関係�文字列��り��"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "'endef' を欠���り, 'define' �終了�����ん"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "'endef' 疑似命令�後��無関係�文字列��り��"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "'%s' 疑似命令�後��無関係�文字列��り��"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "無関係� '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "一���件部���一��� 'else' を使���ん"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "ターゲット特有�変数定義�異常��"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "必��件をレシピ内�定義����ん"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "暗黙ルール��的パターンルール�混�り���"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "暗黙ルール�通常ルール�混�り���"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "ターゲット '%s' �ターゲットパターン�一致���ん"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "ターゲットファイル '%s' � : � :: 項目�両方を������"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "ターゲット '%s' ��一ルール内�複数回与�られ���"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "警告: ターゲット '%s' ����レシピを置�����"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "警告: ターゲット '%s' ������レシピ�無視�れ��"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "暗黙ルール�通常ルール�混�り���"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "警告: NUL 文字��り��; 行�残り�無視�れ��"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "'%s' �対��行���事��り��ん."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' �更新済���."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "ファイル '%s'　��存関係を整������.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%1$s'%3$s' �必��ターゲット '%2$s' を make �るルール��り��ん%4$s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sターゲット '%s' を make �るルール��り��ん%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "ファイル '%s' を検討�����.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "最近ファイル '%s' �更新を試��失敗�����.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "ファイル '%s' �検討済���.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "ファイル '%s'　�更新を�����.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "ファイル '%s'　�更新�終了����.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "ファイル '%s' �存在���ん.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** 警告: .LOW_RESOLUTION_TIME ファイル '%s' �高解�度タイムスタンプを���"
+"���"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "'%s' ����暗黙ルールを見�����.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "'%s' ����暗黙ルール��り��ん.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "'%s' 用�デフォルトレシピを使用���.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "循環 %s <- %s �存関係�破棄�れ���."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "ターゲットファイル '%s' �必��件を満�����.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "'%s' �必��件を make ���.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "ターゲットファイル '%s' を諦���.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "ターゲット '%s' �エラー�より �make ����ん���."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "必��件 '%s' �ターゲット '%s' � order-only(順�決定�件)��.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "ターゲット '%2$s' �必��件 '%1$s' �存在���ん.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "必��件 '%s' �ターゲット '%s' よりも新��.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "必��件 '%s' �ターゲット '%s' よりも��.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "ターゲット '%s' �ダブルコロン�, ��必��件を����.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "'%s' ����レシピ�無�, 必��件�実際��変更�れ��ん���.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "always-make フラグ�立���る�� '%s' を make ���.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "ターゲット '%s' を�make �る必���り��ん"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; VPATH � '%s'　を使用���"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "ターゲット '%s' を�make �る必���り��.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  VPATH � '%s' を無視���.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "'%s' �レシピを実行中��.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "ターゲットファイル '%s' ��make �失敗����.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "ターゲットファイル '%s' �� make ��功����.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "ターゲットファイル '%s' � -q オプションを付����make �必���.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "'%s' ����デフォルト�コマンドを使���.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "警告: ファイル '%s' �修正時刻�未��も���"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "警告: ファイル '%s' �修正時刻 %s �未��時刻��"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS �素 '%s' �パターン���り��ん"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs �エクス�ート���れ��ん: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# 暗黙ルール"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# 暗黙ルール��."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u 個�暗黙ルール, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " 以上."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "�グ: num_pattern_rules �間����る!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "未知�シグナル"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "�ングアップ"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "割り込�"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "終了"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "�正��ードウェア命令"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "トレース/ブレイク�イントトラップ"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Abort ����"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT トラップ"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT トラップ"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "浮動�数点例外"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Kill �れ���"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "�スエラー"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "メモリ��"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "�正�システムコール"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "読�手���パイプ��書�込�"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "アラームクロック"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "強制終了"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "ユーザ定義シグナル 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "ユーザ定義シグナル 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "�プロセス終了"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "電�障害"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "一時�止"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "一時�止 (tty 入力)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "一時�止 (tty 出力)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "一時�止 (シグナル)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU 時間�制�を越����"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "ファイルサイズ制�を越����"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "仮想タイマ満了"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "プロファイルタイマ満了"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "ウィンドウサイズ変更"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "�開�れ���"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "緊急 I/O �件"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "入出力�能"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "リソース�失�れ���"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "�険シグナル"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "情報�求"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "浮動�数点コプロセッサ�利用�能"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s strcache �ッファ��り��ん\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s strcache �ッファ: %lu (%lu) / 文字列 = %lu / 格� = %lu B / 平� = %lu "
+"B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s �在��ッファ: サイズ = %hu B / 使用中 = %hu B / 個数 = %hu / 平� = %hu "
+"B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s ��他 使用中: �計 = %lu B / 個数 = %lu / 平� = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s ��他 未使用: �計 = %lu B / 最大 = %lu B / 最� = %lu B / 平� = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s strcache �稼�: 探索 = %lu / ヒット率 = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# �ッシュテーブル�状態:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "自動変数"
+
+#: variable.c:1602
+msgid "default"
+msgstr "デフォルト"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "環境変数"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile 変数"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "-e オプション�指定��環境変数"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "コマンドライン変数"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "'override' 疑似命令"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (ファイル '%s', %lu 行目)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# 変数セット��ッシュテーブル�状態:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# 変数\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# パターン指定 変数 値"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# パターン指定変数�値��."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u 個�パターン指定変数�値"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "警告: 未定義�変数 '%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() � %d �失敗����\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "警告: 空�リダイレクト\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "内部エラー: '%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-警告, DCL �ら� CTRL-Y �作を��有効��る必���る�も知れ��ん.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "ビルトイン [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "ビルトイン CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "ビルトイン CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "�明�ビルトインコマンド '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "エラー, 空�コマンド\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "%s �ら入力リダイレクト�れ���\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "%s �エラーリダイレクト�れ���\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "出力を %s �追加\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "%s �出力リダイレクト�れ���\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "追加 %.*s �後片付�\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "代�り� %s を実行���\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "spawn �エラー, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH 探索パス\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# 'vpath' 探索パス��り��ん."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u �� 'vpath' 探索パス.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# 一般� ('VPATH' 変数) 探索パス��."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# 一般� ('VPATH' 変数) 探索パス:\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "内部エラー: 複数� --sync-mutex オプション"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "内部エラー: 複数� --jobserver-fds オプション"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "仮想メモリを使�果�����"
+
+#~ msgid "write error"
+#~ msgstr "書�込�エラー"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "ビルトイン RM %s\n"
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  `update_status' メン��無効�値!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] エラー 0x%x (無視�れ���)"
+
+#~ msgid "[%s] Error %d (ignored)"
+#~ msgstr "[%s] エラー %d (無視�れ���)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "レシピを %s:%lu �ら呼�出��ターゲット `%s' を更新���.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "ターゲット `%s' を更新�る��内蔵レシピを呼�出�����.\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # strcache �ッファ %d ���: (* %d B/�ッファ = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# strcache �ッシュテーブル�統計:\n"
+#~ "# "
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "文法エラー, '\"' 内�����\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "SIGCHLD �発生; %u 個�未回��プロセス.\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-警告, CTRL-Y ��プロセスを散ら�������る��ょ�.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "sh.exe �使���状態� -j や --jobs を指定�������ん."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "�一ジョブモード� make �リセット���."
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%s�れ�フリーソフトウェア��. 利用許諾�����ソースを\n"
+#~ "%s�覧����.\n"
+#~ "%s商業性や特定�目的����性�如何�関�ら�, 無�証��.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "関係��� `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "空� `override' 疑似命令"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "無効� `override' 疑似命令"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "`%sinclude' �ファイル���り��ん"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "ターゲット `%s' �必��件パターン�空�����"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr ""
+#~ "# �ッシュ�素��り�平� %.3f 個�最大 %u 個�ファイル��り��。\n"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "デ�ッガ� attach �る��プロセス�一時�止を許��る"
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# �ッシュ�素��り�平� %.1f 個�最大 %u 個�変数��り��。\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# �ッシュ�素��り平� %d.%d 個�最大 %u 個�変数��り��。\n"
+
+#~ msgid "the `word' function takes a positive index argument"
+#~ msgstr "`word' 関数��負�インデックス引数を�り��"
diff --git a/po/ko.gmo b/po/ko.gmo
new file mode 100644
index 0000000..420b249
--- /dev/null
+++ b/po/ko.gmo
diff --git a/po/ko.po b/po/ko.po
new file mode 100644
index 0000000..709bcb1
--- /dev/null
+++ b/po/ko.po
@@ -0,0 +1,2261 @@
+# Korean messages for GNU make.
+# Copyright (C) 1996, 2001, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# Bang Jun-Young <bangjy@nownuri.net>, 1996.
+# Changwoo Ryu <cwryu@debian.org>, 2001, 2006, 2013.
+#
+# ìš©ì–´
+# - recipe - 명령 (make� action으로 실행할 명령어를 �함)
+# - prerequisite - ì„ í–‰ ì¡°ê±´
+#
+# 참고
+# - order-only란 �존하는 타겟 중�서 명령어 순서만 지정하고 파� 수정
+# 시�� 무시하는 종류를 �한다. "Types of Prerequisites" 참고.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-12-01 18:10+0900\n"
+"Last-Translator: Changwoo Ryu <cwryu@debian.org>\n"
+"Language-Team: Korean <translation-team-ko@lists.sourceforge.net>\n"
+"Language: ko\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "지��지 않는 기능� 사용하려고 함: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "아카�브 멤버 touch는 VMS�서 사용할 수 없습니다"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: '%s' 아카�브가 없습니다"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s'�(는) 올바른 아카�브가 아닙니다"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: '%s' 멤버가 '%s' 안� 없습니다"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: '%s'� 대하여 ar_member_touch�서 실패 리턴 코드"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module()� 모듈정보를 추출하는 � 실패, �태 = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control()� 실패, �태 = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "'%2$s' 멤버를 참조하려고 '%1$s' ��브러리를 열 수 없습니다"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "멤버 '%s'%s: %ld바�트, 위치 %ld (%ld).\n"
+
+# �미 잘려진 �름� 표시하면서 �름� 잘려졌� 수� 있으니 유�하�는 뜻
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (�름� 잘려나갔� 수� 있습니다)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  날짜 %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, 모드 = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "명령어� 줄� 너무 많습니다(%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** 중지.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] 아카�브 '%s' 멤버는 가짜� 수 있으므로 삭제하지 않습니다"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** 아카�브 '%s' 멤버는 가짜� 수 있으므로 삭제하지 않습니다"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] '%s' 파�� 삭제합니다"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** '%s' 파�� 삭제합니다"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  실행할 명령어"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (내장):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " ('%s'�서, %lu번째 줄):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# 디렉터리\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: stat� 할 수 없었습니다.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (키 %s, 변경시� %d): 열 수 없습니다.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (장치 %d, 아�노드 [%d,%d,%d]): 열 수 없습니다.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (장치 %ld, 아�노드 %ld): 열 수 없습니다.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (키 %s, 변경시� %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (장치 %d, 아�노드 [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (장치 %ld, 아�노드 %ld): "
+
+# 여기서 No는 "No files"�고 쓰�다.  �극�으로 msgid가 고�져야 함
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "0개"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " 파�, "
+
+# 여기서 no는 "no impossibilities"�고 쓰�다.  �극�으로 msgid가 고�져야 함
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "0개"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " 불가능"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " 지금까지."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " 디렉토리 %lu개�서 불가능.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "재귀하는 '%s' 변수는 (결국) �기 �신� 참조하고 있습니다"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "변수 참조� �마침� 없습니다"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "파� '%s'� %s:%lu�서 명령� 지정했습니다."
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "파� '%s'� 대한 명령� 묵시� 규칙 �색으로 찾았습니다."
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "하지만 '%s' 파�� �제 '%s'과(와) 같� 파�로 간주합니다."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "'%s'� 대한 명령� '%s'� 대한 명령� 우선하므로 무시합니다."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "단� 콜론 '%s'�(를) �중 콜론 '%s'(으)로 �름� 바꿀 수 없습니다"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "�중 콜론 '%s'�(를) 단� 콜론 '%s'(으)로 �름� 바꿀 수 없습니다"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** 중간 파� '%s'�(를) 삭제합니다"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "중간 파�� 제거합니다...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "현재 시�"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: 타임스탬프가 범위를 벗어나므로, %s�(를) 대체합니다"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# 타겟� 아님:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  프레시어스 파� (.PRECIOUS� 선행조건)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  �니 타겟 (.PHONY� 선행조건)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  명령행 타겟."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+"#  기본 메��파�, MAKEFILES 메��파�, �는 -include/sinclude 메��파�."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  내장 규칙"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  묵시� 규칙 �색� 완료�었습니다."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  묵시� 규칙 �색� 완료�지 않았습니다."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  묵시�/고정 패턴 스템: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  파�� 중간단계� 선행조건입니다."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  다�� 만듭니다:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  변경 시�� 결코 검사�지 않았�."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  파�� 없습니다."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  파�� 매우 오래�었습니다."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  마지막 변경 %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  파�� 업��트했습니다."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  파�� 업��트하지 않았습니다."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  현재 실행중� 명령(�것� 버그입니다)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  현재 실행중� �존성(�것� 버그입니다)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  성공�으로 업��트."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  업��트 필요(-q 설정�)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  업��트 실패."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  'command_status' 멤버� 값� 잘못�었습니다!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# 파�"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# 파� 해시 테�블 통계:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: '%s' 필드가 �시� 없�: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "'word' 함수� 첫번째 ��가 숫�가 아닙니다"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "'word' 함수� 첫번째 ��는 0보다 커야 합니다"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "'wordlist' 함수� 첫번째 ��가 숫�가 아닙니다"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "'wordlist' 함수� �번째 ��가 숫�가 아닙니다"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) 실패(e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) 실패(e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() 실패(e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() 실패\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "임시 배치 파� %s�(를) 지�니다\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "write: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "올바르지 않� 파� �작: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "함수 '%2$s'� �� 갯수(%1$d)가 부족합니다 "
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "� 플랫��서는 구현�지 않았습니다: '%s' 함수"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "함수 '%s'� 대해 종료�지 않� 호출: '%c' 문�가 빠졌�"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "빈 함수 �름: %s\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "잘못� 함수 �름: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "함수 �름� 너무 �니다: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "함수 `%2$s'� 최소 �� 갯수(%1$d)가 잘못�었습니다\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "함수 `%2$s'� 최대 �� 갯수(%1$d)가 잘못�었습니다\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: '%s' 옵션� 애매한 옵션입니다\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: '--%s' 옵션� �수를 허용하지 않습니다\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: '%c%s' 옵션� �수를 허용하지 않습니다\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: '%s' 옵션� �수가 필요합니다\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: ��할 수 없는 옵션 '--%s'\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: ��할 수 없는 옵션 '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: 잘못� 옵션 -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: 부�절한 옵션 -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: � 옵션� �수가 필요합니다 -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: '-W %s' 옵션� 애매한 옵션입니다\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: '-W %s' 옵션� �수를 허용하지 않습니다\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: '%s' 확장\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: '%s' 해�\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "해시 테�블� %lu 바�트를 할당할 수 없습니다: 메모리 바닥남"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "로드=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "다시 해시=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "충�=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "'%s'� 대한 묵시� 규칙� 찾고 있습니다.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "'%s'� 대한 아카�브멤버 묵시� 규칙� 찾고 있습니다.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "묵시� 규칙� 재귀를 피함.\n"
+
+# 스템(stem)�란 패턴 룰�서 prefix/suffix를 제외한 나머지를 �한다.
+# 예를 들어 `%.c'�는 패턴� `hello.c'가 들어 맞았� 경우 stem� `hello'�다.
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "스템� 너무 �니다: '%.*s'.\n"
+
+# 스템(stem)�란 패턴 룰�서 prefix/suffix를 제외한 나머지를 �한다.
+# 예를 들어 `%.c'�는 패턴� `hello.c'가 들어 맞았� 경우 stem� `hello'�다.
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "'%.*s' 스템�서 패턴 규칙 시�.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "불가능한 규칙 선행조건 '%s'�(는) 거부�니다.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "불가능한 묵시� 선행조건 '%s'�(는) 거부�니다.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "규칙 선행조건 '%s'�(를) 시�합니다.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "묵시� 선행조건 '%s'�(를) 시�합니다.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "VPATH '%2$s'�서 선행조건 '%1$s'�(를) 찾았습니다\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "중간 파� '%s'� 대한 묵시� 규칙� 찾고 있습니다.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "임시 파�� 만들 수 없습니다\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (메모리 �프�)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (무시�)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<내장>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: '%s' 타겟� 대한 명령� 실패했습니다"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] 오류 %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] 오류 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** �나지 않� 작업� 기다리고 있습니다...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "살아있는 하위 프로세스 %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (�격)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "실패한 하위 프로세스 %p PID %s %s�(를) 거둬들입니다\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "성공한 하위 프로세스 %p PID %s %s�(를) 거둬들입니다\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "임시 배치 파� %s�(를) 지�니다\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "임시 배치 파� %s 지우기가 실패했습니다(%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "하위 프로세스 %p PID %s%s�(를) 체��서 지�니다.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "작업 서버 세마�어 해제: (오류 %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "하위 프로세스 %p(%s)� 토�� 내어 �니다.\n"
+
+# ??? 디버깅 메세지
+#: job.c:1036
+msgid "write jobserver"
+msgstr "작업서버 쓰기"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy()가 프로세스를 시작하는 � 실패했습니다(e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"실행 실패�서 �수 %d개\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "하위 프로세스 %p(%s) PID %s%s�(를) 체�� 넣습니다.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "세마�어 �는 하위 프로세스 대기: (오류 %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "하위 프로세스 %p(%s)�서 토�� 받았습니다.\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "작업 파�프 �기"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: '%s' 타겟� 없습니다"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: '%s' 타겟 업��트, �유: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "� 운� 체제�서는 부하 제한� 강제할 수 없습니다"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "부하 제한� 강제할 수 없습니다: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "파� 핸들� 없�: 표준 입력� 복사할 수 없습니다\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "파� 핸들� 없�: 표준 출력� 복사할 수 없습니다\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "파� 핸들� 없�: 표준 오류를 복사할 수 없습니다\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "표준 입력� 복구할 수 없습니다\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "표준 출력� 복구할 수 없습니다\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "표준 오류를 복구할 수 없습니다\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"하위 프로세스 PID %s�(를) 거둬들�고, 아� PID %s�(를) 기다리고 있습니다\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: 명령� 찾지 못했�"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: 셸 프로그램� 찾지 못했�"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: 환경 변수 공간� 바닥났� 수 있습니다"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL� 바뀌었습니다(과거 '%s', 현재 '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "임시 배치 파� %s�(를) 만듭니다\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"배치 파� 내용:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"배치 파� 내용:%s\n"
+"\t%s\n"
+
+# ???  디버깅 메세지
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (%d번째 줄) 잘못� 쉘 컨�스트 (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[방�] (--output-sync[=방�]) 옵션� � 빌드�서 사용하지 않습니다."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "전역 심볼 테�블� 여는� 실패했습니다: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "�어들� %s 오브�트는 GPL 호환��고 선언하지 않았습니다"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "%s 심볼� %s�서 �어들�는� 실패: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "�어들� 심볼 �름� 비었�: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "%s 심볼� %s�서 �어들임\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "'load' 작업� � 플랫��서 지��지 않습니다."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "옵션:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      무시�니다, 호환� 위해 유지.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           조건� 관계 없� 모든 타겟� 만듭니다.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C <디렉터리>, --directory=<디렉터리>\n"
+"                              뭔가 하기 전� <디렉터리>로 ��합니다.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          여러 가지 디버깅 정보를 출력합니다.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=플래그]            여러 가지 종류� 디버깅 정보를 출력합니다.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              환경변수가 메��파� 내용� 우선합니다.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=<문�열>             <문�열>� 메��파� 내용으로 해�합니다.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f <파�>, --file=<파�>, --makefile=<파�>\n"
+"                              <파�>� 메��파�로 �습니다.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  � 메시지를 출력하고 �냅니다.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         명령�서 발�하는 오류를 무시합니다.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I <디렉터리>, --include-dir=<디렉터리>\n"
+"                              �함할 메��파�� <디렉터리>�서 찾습니다.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          �시� N개� 작업 허용, �� 없으면 무한대로 허"
+"ìš©.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            �부 타겟� 만들 수 없��� 계� 진행합니다.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              로드가 N 아래로 내려가야 �시 작업 시작합니"
+"다.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   심볼릭 ��와 실제 중 � 최근 수정 시��\n"
+"                               사용합니다.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              실제로는 아무 명령� 실행하지 않고 표시만 합니"
+"다.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o <파�>, --old-file=<파�>, --assume-old=<파�>\n"
+"                              <파�>� 아주 오래 �었다고 ��하고 다시 만들"
+"지\n"
+"                              않습니다.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[방�], --output-sync[=방�]\n"
+"                              병렬 작업� 출력� <방�>� 따� 맞춥니다.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       make� 내부 ��터베�스를 출력합니다.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              명령� 실행하지 않�. 종료 �태로 업��트\n"
+"                              여부를 알 수 있습니다.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      내장 묵시� 규칙� 사용하지 않습니다.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  내장 변수를 지정하지 못하게 합니다.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       명령어를 출력하지 않습니다.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              -k 옵션� �니다.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 타겟� 다시 만들지 않고 touch만 합니다.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     추� 정보를 표시합니다.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               make� 버전 번호를 출력하고 �냅니다.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       현재 디렉터리를 출력합니다.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr "  --no-print-directory        묵시�으로 켜져 있��� -w를 �니다.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W <파�>, --what-if=<파�>, --new-file=<파�>, --assume-new=<파�>\n"
+"                              <파�>� 무한히 계� 새로운 것으로 취급합니"
+"다.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  정��지 않� 변수를 참조할 때 경고를 냅니다.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "빈 문�열� 파� �름으로 부�절합니다"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "디버깅 단계 지정 '%s'�(가) 잘못�었습니다"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "알 수 없는 output-sync 방� '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: �터럽트/예외가 발견�었습니다(코드 = 0x%lx, 주소 = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"프로그램 %s�서 처리�지 않� 예외가 발�했습니다\n"
+"예외코드 = %lx\n"
+"예외플래그 = %lx\n"
+"예외주소 = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "접근 권한 위반: 주소 0x%p� 쓰기\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "접근 권한 위반: 주소 0x%p�서 �기\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() 설정 default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() 경로 �색 설정 default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s�(가) 30초�안 �시 중지�니다..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "완료 sleep(30). 계�.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr "내부 오류: 작업 서버 세마�어('%s')를 열 수 없습니다: (오류 %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "작업 서버 ���언트(세마�어 %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "내부 오류: 잘못� --jobserver-fds 문�열 '%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "작업 서버 ���언트(파� 디스�립터 %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "경고: 파�� 메���서 -jN� 강제�었습니다: 작업서버 모드를 �니다."
+
+# ???  디버깅 메세지
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup 작업서버"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"경고: 작업서버를 사용할 수 없습니다: -j1� 사용합니다.  �위 메�� 규칙� "
+"'+'를 추가합니다."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "표준입력�서 받아들�는 메��파�� � 번 �� 지정�었습니다."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen(임시 파�)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite(임시 파�)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "병렬 작업(-j)� � 플랫��서 지�하지 않습니다."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "단� 작업 (-j1) 모드로 �아갑니다."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "작업서버 슬롯� %d개로 제한�니다\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "작업서버 세마�어 만들기: (오류 %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "작업 파�프 �성"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "작업서버 파�프 초기화"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "심볼릭 ��를 지�하지 않습니다: -L 옵션� �니다."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "메��파�� 업��트하고 있습니다....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "메��파� '%s'�(는) 반복할 수 있으므로, 다시 만들지 않습니다.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "'%s' 메��파�� 다시 만드는� 실패."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "�함� 메��파� '%s'�(를) 찾지 못했습니다."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "메��파� '%s'�(를) 찾지 못했습니다"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "�래 디렉터리로 �아갈 수 없습니다."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "재실행[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (임시 파�): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL 안� 타겟� 여러 개 들어 있습니다"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "타겟� 지정�지 않았고 메��파�� 없습니다"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "타겟 없�"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "최종 타겟� 갱신합니다....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"경고:  시계가 잘못�었�� 발견�었습니다.  빌드가 불완전할 수 있습니다."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "사용법: %s [옵션] [타겟] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"� 프로그램� %s�서 사용하�� 빌드�었습니다\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"� 프로그램� %s(%s)�서 사용하�� 빌드�었습니다\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "문제�� <bug-make@gnu.org>로 알려 주십시오.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "'%s%s' 옵션� 비어 있지 않� 문�열 �수가 필요합니다"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "'-%c' 옵션� 0보다 � 정수 �수가 필요합니다"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%s%s 빌드\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%s%s(%s) 빌드\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%s��선스 GPLv3+: GNU GPL 버전 3 �는 �후 <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# 메�� ��터베�스, %s� 표시"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# 메�� ��터베�스 마침, %s�서\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "알 수 없는 오류 %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: 사용� %lu (실제 %lu), 그룹 %lu (실제 %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "접근 권한 초기화"
+
+#: misc.c:622
+msgid "User access"
+msgstr "사용� 접근"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "메�� 접근"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "하위 접근"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: 알 수 없는 디렉터리 들어�\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: 알 수 없는 디렉터리 나�\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: 디렉터리 '%s' 들어�\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: 디렉터리 '%s' 나�\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: 알 수 없는 디렉터리 들어�\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: 알 수 없는 디렉터리 나�\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: 디렉터리 '%s' 들어�\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: 디렉터리 '%s' 나�\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "쓰기 오류: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  멈춤.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "메��파�� �고 있습니다...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "'%s' 메��파�� �고 있습니다"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (최종 타겟� 없�)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (�색 경로)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (�관 안함)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (~ 확장 없�)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "메��파� '%s'�서 UTF-8 BOM 무시\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "메��파� 버��서 UTF-8 BOM 무시\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "조건문� 부�절한 문법� 쓰임"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: �어들�는� 실패"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "첫번째 타겟보다 앞�서 명령어가 시작�었습니다"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "명령 앞� 규칙� 빠졌�"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (8개� 공백 �고 탭� 쓰려고 한 것 아니었습니까?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "분리기호 %s�(가) 빠졌�"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "타겟 패턴� 빠졌�"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "다중 타겟 패턴"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "타겟 패턴� '%%'가 없습니다."
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "'endif'가 빠졌�"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "빈 변수 �름"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "'define' 지시� 뒤� 필요 없는 �스트 있�"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "'endef'가 빠졌�. 'define'� 마치지 않았습니다"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "'endef' 지시� 뒤� 필요 없는 �스트가 있�"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "'%s' 지시� 뒤� 필요 없는 �스트가 있�"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "필요 없는 '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "한 개� 조건�는 한 개� 'else'만 있어야 합니다"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "타겟별 변수 정� 형�� 틀렸습니다"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "명령어�서 선행조건� 정�할 수 없습니다"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "묵시� 패턴 룰과 고정� 패턴룰� 섞였습니다"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "혼합� 묵시� 규칙과 �반� 규칙"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "타겟 '%s'�(는) 타겟 패턴� 맞지 않습니다"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "타겟 파� '%s'�(는) :와 :: 항목� �시� 갖고 있습니다"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "타겟 '%s'�(가) 같� 규칙�서 여러 번 주어졌습니다"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "경고: 타겟 '%s'� 대한 명령보다 우선합니다"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "경고: 타겟 '%s'� 대한 과거 명령� 무시합니다"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "혼합� 묵시� 규칙과 �반� 규칙"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "경고: NUL 문�가 발견�었습니다; 줄� 나머지는 무시�니다"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "'%s'�(를) 위해 할 �� 없습니다."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s'�(는) �미 업��트�었습니다."
+
+# prune� truncate� �미�가 지운다는 �미�가??
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "'%s' 파�� 잘�냅니다.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%1$s'%3$s'�서 필요한 '%2$s' 타겟� 만들 규칙� 없습니다%4$s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s타겟 '%s'�(를) 만들 규칙� 없습니다%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "'%s' 타겟 파�� 고려합니다.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "최근� '%s' 파� 업��트를 시�해 실패했습니다.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "'%s' 파�� �미 검토했습니다.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "아� '%s' 파�� 업��트하고 있습니다.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "'%s' 파�� 업��트를 마쳤습니다.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "'%s' 파�� 없습니다.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Warning: .LOW_RESOLUTION_TIME 파� '%s'� 고해�� 타임 스탬프가 들어 있"
+"습니다"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "'%s'� 대한 묵시� 규칙� 찾았습니다.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "'%s'� 대한 묵시� 규칙� 없습니다.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "'%s'� 대해 기본 명령 사용.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "%s <- %s �호 �존성� 무시�니다."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "타겟 파� '%s'� 선행조건� 마쳤습니다.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "'%s'� 선행조건� 만들어지고 있습니다.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "타겟 파� '%s'�(를) �기합니다.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "오류로 '%s' 타겟� 다시 만들지 못했습니다."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "'%s' 선행 조건� '%s' 타겟� 대해 순서만 선행 조건입니다.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "타겟 '%2$s'� 선행조건 %1$s�(가) 없습니다.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "'%s' 선행 조건� '%s' 타겟보다 나중� 만들어졌습니다.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "'%s' 선행 조건� '%s' 타겟보다 먼저 만들어졌습니다.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "'%s' 타겟� 콜론 � 개가 붙었고 선행조건� 없습니다.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "'%s'� 대한 명령어가 없고 어떤 선행조건� 실제로 바뀌지 않았습니다.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "always-make 옵션 때문� '%s' 타겟� 만듭니다.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "'%s' 타겟� 다시 만들 필요가 없습니다"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; VPATH �름 '%s'�(를) 사용합니다"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "'%s' 타겟� 다시 만들어야 합니다.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  VPATH �름 '%s'�(를) 무시합니다.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "'%s'� 명령� 실행 중입니다.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "'%s' 타겟 파�� 다시 만드는� 실패했습니다.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "'%s' 타겟 파�� 성공�으로 다시 만들었습니다.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "'%s' 타겟 파�� -q 옵션으로 다시 만들어야 합니다.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "'%s'� 대해 기본 명령� 사용.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "경고: '%s' 파�� 변경 시�� 미래입니다"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "경고: '%s' 파�� 변경 시�(%s)� 미래입니다"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS� �소 '%s'�(가) 패턴� 아닙니다"
+
+# ???  디버깅 메세지 -- 뭔지 알기 어려움
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs� export�지 않습니다: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# 묵시� 규칙"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# 묵시� 규칙 없�."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# 묵시� 규칙 %u개, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " 터미�."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "버그: num_pattern_rules 틀렸습니다!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "알 수 없는 신호"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "�어�"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "�터럽트"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "�내기"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "잘못� 명령"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "추�/중단� 트랩"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "중단�"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT 트랩"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT 트랩"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "부� 소수� 예외"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "죽었�"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "버스 오류"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "세그멘테�션 오류"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "잘못� 시스템 호출"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "깨어진 파�프"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "�명종 시계"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "종료�"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "사용� 정� 신호 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "사용� 정� 신호 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "하위 프로세스 �남"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "전력 중단"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "중지�"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "중지�(tty 입력)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "중지�(tty 출력)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "중지�(시그�)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU 시간 제한 초과�"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "파� �기 제한 초과�"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "가� 타�머 시간 초과�"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "프로파�� 타�머 시간 초과�"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "창� 바뀌었�"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "계��"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "긴급한 입출력 �황"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "입출력 가능"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "�� �실"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "위험 신호"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "정보 요청"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "부�소수� 연산 보조프로세서가 없습니다"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s strcache 버� 없�\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s strcache 버�: %lu (%lu) / 문�열 = %lu / 저장 공간 = %lu B / �균 = %lu "
+"B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s 현재 버�: �기 = %hu B / 사용 = %hu B / 개수 = %hu / �균 = %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s 기타 사용: 전체 = %lu B / 개수 = %lu / �균 = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s 기타 빈 공간: 전체 = %lu B / 최대 = %lu B / 최소 = %lu B / �균 = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s strcache 효율: 검색 = %lu / 히트 비율 = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# 해시 테�블 통계:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "��"
+
+#: variable.c:1602
+msgid "default"
+msgstr "기본값"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "환경"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "메��파�"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "-e 하� 환경"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "명령행"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "'override' 지시�"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " ('%s'�서, %lu번째 줄)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# 변수 모� 해시 테�블 통계:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# 변수\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# 패턴� 위한 변수 값"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# 패턴� 위한 변수 값� 없습니다."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# 특정 패턴� 위한 변수 값 %u개"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "경고: 정��지 않� 변수 '%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search()가 %d번� 리턴하며 실패했습니다\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "경고: 비어 있는 리다�렉션\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "내부 오류: '%s' command_state"
+
+# DCL - Digital Command Language, VMS�서만 존재하는 shell language� �종
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-경고, DCL�서 CTRL-Y를 다시 사용가능하�� 해야 할 것입니다.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "내장 [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "내장 CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "내장 CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "알 수 없는 내장 명령어 '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "오류, 빈 명령어\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "입력� %s�서 리다�렉트합니다\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "오류를 %s(으)로 리다�렉트합니다\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "출력� %s� 붙입니다\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "출력� %s(으)로 �립니다\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "%.*s�(를) 붙�고 지�니다\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "대신 %s�(를) 실행\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "실행 오류, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH �색 경로\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# 'vpath' �색 경로가 없�."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# 'vpath' �색 경로 %u개.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# �반�� ('VPATH' 변수) �색 경로가 없�."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# �반�� ('VPATH' 변수) �색 경로:\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "내부 오류: 여러 개� --sync-mutex 옵션"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "내부 오류: 여러 개� -jobserver-fds 옵션"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "가� 메모리가 고갈�"
+
+#~ msgid "write error"
+#~ msgstr "쓰기 오류"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "내장 RM %s\n"
diff --git a/po/lt.gmo b/po/lt.gmo
new file mode 100644
index 0000000..5277a0e
--- /dev/null
+++ b/po/lt.gmo
diff --git a/po/lt.po b/po/lt.po
new file mode 100644
index 0000000..e9fa7d2
--- /dev/null
+++ b/po/lt.po
@@ -0,0 +1,2186 @@
+# translation of make-3.81 to Lithuanian
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# Gintautas Miliauskas <gintas@akl.lt>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: make-3.81\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2008-05-17 21:42+0300\n"
+"Last-Translator: Gintautas Miliauskas <gintas@akl.lt>\n"
+"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
+"Language: lt\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms:  nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n"
+"%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "bandymas naudoti nepalaikomą funkcionalumą: „%s“"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr ""
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Archyvas „%s“ neegzistuoja"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: „%s“ nėra taisyklingas archyvas"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Archyvas „%s“ neegzistuoja"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr ""
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "nepavyko atverti bibliotekos „%s“ bandant surasti narį „%s“"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Narys „%s“%s: %ld baitų pozicijoje %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (pavadinimas gali būti sutrumpintas)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Data %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr ""
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Trinamas failas „%s“"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Trinamas failas „%s“"
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  vykdytinos komandos"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr "  (integruota)"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (nuo „%s“, %lu eilutė):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Aplankai\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: negalėjo būti stat'intas.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (key %s, mtime %d): nepavyko atverti.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr ""
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr ""
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr ""
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Ne"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " failai, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "ne"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " negalimybÄ—s"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " kol kas."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " negalimybÄ—s %lu aplankuose.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekursyvus kintamasis „%s“ nukreipia į save (anks�iau ar vėliau)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "neterminuota nuoroda į kintamąjį"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Komandos nurodytos failui „%s“ %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Komandos failui „%s“ rastos pagal neišreikštinę taisyklių paiešką"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "bet „%s“ dabar laikomas tuo pa�iu failu kaip „%s“."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Komandos „%s“ bus ignoruojamos „%s“ komandų naudai."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Trinamas tarpinis failas „%s“"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Å alinami tarpiniai failai...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Dabartinis laikas"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Laiko žymė už rėžių; kei�iama į %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Ne tikslas:"
+
+#: file.c:960
+#, fuzzy
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Brangus failas (reikalingas .PRECIOUS)"
+
+#: file.c:962
+#, fuzzy
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Keistas tikslas (reikalingas .PHONY)."
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  KomandinÄ—s eilutÄ—s tikslas"
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Numatytoji reikšmė, MAKEFILES, arba -include/sinclude „make“ failas"
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Nėra neišreikštinių taisyklių."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Neišreikštinių taisyklių paieška atlikta."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Neišreikštinių taisyklių paieška neatlikta."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Išreikštinis/statinis šablono kamienas: „%s“\n"
+
+#: file.c:975
+#, fuzzy
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Failas yra tarpinÄ— sÄ…lyga"
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Taip pat sukuria:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Modifikacijos laikas niekada netikrintas."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Failas neegzistuoja."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Failas labai senas."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Paskutinį kartą pakeista %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Failas atnaujintas."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Failas nebuvo atnaujintas."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Dabar vykdomos komandos (TAI KLAIDA)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Vykdomos priklausomybių komandos (TAI KLAIDA)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  SÄ—kmingai atnaujinta."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Turi būti atnaujinta (-q nustatyta)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Nepavyko atnaujinti."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Netaisyklinga reikšmė „command_state“ naryje!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Failai"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# failų maišos lentelės statistika:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr ""
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr ""
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr ""
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr ""
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "rašymo klaida: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr ""
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr ""
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr ""
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr ""
+
+#: function.c:2601
+#, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr ""
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: parametras `%s' dviprasmis\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: argumentas „--%s“ neleidžia parametro\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: argumentas „%c%s“ neleidžia parametro\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: parametrui „%s“ reikia argumento\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: neatpažintas argumentas „--%s“\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: neatpažintas argumentas „%c%s“\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: neleistinas parametras -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: netaisyklingas argumentas -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: parametrui reikia argumento -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: parametras „-W %s“ dviprasmis\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: parametras „-W %s“ neleidžia argumento\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr ""
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr ""
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr ""
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Rasta neišreikštinė taisyklė tikslui „%s“.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Rasta neišreikštinė taisyklė tikslui „%s“.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr ""
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr ""
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Å alinami tarpiniai failai...\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr ""
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr ""
+
+#: job.c:488
+msgid " (ignored)"
+msgstr ""
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr "  (integruota)"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr ""
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr ""
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr ""
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr ""
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr ""
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:849
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "%s: nepavyko atverti laikinojo failo: %s"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "%s: nepavyko atverti laikinojo failo: %s"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ""
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1036
+#, fuzzy
+msgid "write jobserver"
+msgstr "rašymo klaida: %s"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr ""
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ""
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr ""
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Archyvas „%s“ neegzistuoja"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%sNėra taisyklės pasiekti tikslui „%s“, kurio reikia „%s“%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+
+#: job.c:2173
+#, fuzzy
+msgid "cannot enforce load limit: "
+msgstr "%s: nepayko pakeisti limito: %s"
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Komanda nerasta"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Kevalo programa nerasta"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL pakeistas (buvo „%s“, dabar „%s“)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr ""
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr ""
+
+#: main.c:313
+msgid "Options:\n"
+msgstr ""
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr ""
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr ""
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr ""
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "negalimas tuš�ias failo pavadinimas"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "nežinomas debug lygio specifikacija „%s“"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr ""
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr ""
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr ""
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr ""
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr ""
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr ""
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr ""
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr ""
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr ""
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr ""
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr ""
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Atnaujinami „make“ failai....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Nereikia atnaujinti taikinio „%s“"
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "„Make“ failas „%s“ nerastas"
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "„Make“ failas „%s“ nerastas"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Nepavyko grįžti į pirminį aplanką."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr ""
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr ""
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nenurodyta tikslų ir nerasta „make“ failų"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Nėra tikslų"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Atnaujinami tikslai...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Naudojimas: %s [argumentai] [tikslas] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Å i programa sukompiliuota %s sistemai\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Å i programa sukompiliuota %s (%s) sistemai\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Praneškite apie klaidas adresu <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "parametrui „-%c“ reikia netuš�io argumento"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "parametrui „-%c“ reikia teigiamo sveiko argumento"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"%sÅ i programa sukompiliuota %s sistemai\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"%sÅ i programa sukompiliuota %s (%s) sistemai\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Nežinoma klaida %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: user %lu (real %lu), group %lu (real %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr ""
+
+#: misc.c:622
+msgid "User access"
+msgstr ""
+
+#: misc.c:670
+msgid "Make access"
+msgstr ""
+
+#: misc.c:704
+msgid "Child access"
+msgstr ""
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Įeinama į nežinomą aplanką\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Išeinama iš nežinomo aplanko\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Įeinama į aplanką „%s“\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Išeinama iš aplanko „%s“\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Įeinama į nežinomą aplanką\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Išeinama iš nežinomo aplanko\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Įeinama į aplanką „%s“\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Išeinama iš aplanko „%s“\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "rašymo klaida: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Pabaiga.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Skaitomi „make“ failai...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Skaitomas „make“ failas „%s“"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (nÄ—ra numatytojo tikslo)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (paieškos kelias)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (nesvarbu)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (nėra ~ išplėtimo)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "netaisyklinga sÄ…lygos sintaksÄ—"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "komandos prasideda prieš pirmąjį tikslą"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "trūksta taisyklės prieš komandas"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (ar norėjote padėti TAB simbolį vietoje 8 tarpų?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "trūksta skirtuko%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "trūksta tikslo šablono"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "keli tikslo Å¡ablonai"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "tikslo šablone nėra „%%“"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "trūksta „endif“"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "tuš�ias kintamojo pavadinimas"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "Perteklinis tekstas po „endef“ direktyvos"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "trūksta „endef“, nebaigtas „define“"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "Perteklinis tekstas po „endef“ direktyvos"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Perteklinis tekstas po „%s“ direktyvos"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "perteklinis „%s“"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr ""
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr ""
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr ""
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr ""
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr ""
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr ""
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ""
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+
+#: read.c:2229
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr ""
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Nėra ką daryti su „%s“."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "„%s“ atnaujinti nereikia."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Vis dar atnaujinamas failas „%s“.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sNėra taisyklės pasiekti tikslui „%s“, kurio reikia „%s“%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sNėra taisyklės pasiekti tikslui „%s“%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Svarstomas tikslo failas „%s“.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Neseniai bandyta ir nepavyko atnaujinti failo „%s“.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Failas „%s“ jau apsvarstytas.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Vis dar atnaujinamas failas „%s“.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Baigtas atnaujinti failas „%s“.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Failas „%s“ neegzistuoja.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Rasta neišreikštinė taisyklė tikslui „%s“.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Nerasta neišreikštinių taisyklių tikslui „%s“.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr ""
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr ""
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Svarstomas tikslo failas „%s“.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr ""
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Svarstomas tikslo failas „%s“.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Tikslas „%s“ neatnaujintas dėl klaidų."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ""
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Failas „%s“ neegzistuoja.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr ""
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ""
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr ""
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Nereikia atnaujinti taikinio „%s“"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr ""
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Būtina atnaujinti taikinį „%s“.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr ""
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Vykdomos „%s“ komandos.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Nereikia atnaujinti taikinio „%s“"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Būtina atnaujinti taikinį „%s“.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "paskutinÄ— komanda: %s\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr ""
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ""
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr ""
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Neišreikštinės taisyklės"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Nėra neišreikštinių taisyklių."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u neišreikštinių taisyklių, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr ""
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr ""
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "nežinomas signalas"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr ""
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Pertraukimas"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "IÅ¡eita"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Neleistina instrukcija"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr ""
+
+#: signame.c:109
+msgid "Aborted"
+msgstr ""
+
+#: signame.c:112
+#, fuzzy
+msgid "IOT trap"
+msgstr "EMT gaudyklÄ—"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT gaudyklÄ—"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Slankaus kablelio klaida"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Nutraukta"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "MagistralÄ—s klaida"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Segmentacijos klaida"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Blogas sisteminis kvietimas"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr ""
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Žadintuvas"
+
+#: signame.c:139
+#, fuzzy
+msgid "Terminated"
+msgstr "apribota"
+
+#: signame.c:142
+#, fuzzy
+msgid "User defined signal 1"
+msgstr "%s: nutrauktas signalo %d"
+
+#: signame.c:145
+#, fuzzy
+msgid "User defined signal 2"
+msgstr "%s: nutrauktas signalo %d"
+
+#: signame.c:150 signame.c:153
+#, fuzzy
+msgid "Child exited"
+msgstr "Failas jau egzistuoja"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Elektros maitinimo sutrikimas"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Sustabdyta"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Sustabdyta (tty įvedimas)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Sustabdyta (tty išvedimas)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Sustabdyta (signalas)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Viršytas CPU laiko limitas"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Viršytas failo dydžio limitas"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr ""
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr ""
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Langas pakeistas"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Pratęsta"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr ""
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Galimas įvedimas/išvedimas"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "IÅ¡teklius prarastas"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Pavojaus signalas"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Informacijos užklausa"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Slankaus kablelio koprocesorius neprieinamas"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# failų maišos lentelės statistika:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr ""
+
+#: variable.c:1602
+msgid "default"
+msgstr ""
+
+#: variable.c:1605
+msgid "environment"
+msgstr ""
+
+#: variable.c:1608
+msgid "makefile"
+msgstr ""
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr ""
+
+#: variable.c:1614
+#, fuzzy
+msgid "command line"
+msgstr "%s: komanda nerasta"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "tuš�ia „override“ direktyva"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (nuo „%s“, %lu eilutė):\n"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr ""
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "%s: neatpažintas argumentas „%c%s“\n"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr ""
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr ""
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr ""
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr ""
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr ""
+
+#: vmsjobs.c:501
+#, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr ""
+
+#: vmsjobs.c:505
+#, fuzzy, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "paskutinÄ— komanda: %s\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr ""
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr ""
+
+#: vmsjobs.c:681
+#, fuzzy, c-format
+msgid "Redirected error to %s\n"
+msgstr "skaitymo klaida: %d: %s"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr ""
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr ""
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr " (paieškos kelias)"
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  Netaisyklinga reikšmė „update_status“ naryje!"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "baigÄ—si virtuali atmintis"
+
+#~ msgid "write error"
+#~ msgstr "rašymo klaida"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "perteklinis „endef“"
+
+#, fuzzy
+#~ msgid "invalid `override' directive"
+#~ msgstr "netaisyklinga „override“ direktyva"
diff --git a/po/make.pot b/po/make.pot
new file mode 100644
index 0000000..0faab64
--- /dev/null
+++ b/po/make.pot
@@ -0,0 +1,2112 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.1\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr ""
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr ""
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr ""
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr ""
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr ""
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr ""
+
+#: arscan.c:255
+#, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr ""
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr ""
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr ""
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr ""
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr ""
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr ""
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr ""
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr ""
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr ""
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr ""
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr ""
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr ""
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr ""
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr ""
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr ""
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr ""
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr ""
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr ""
+
+#: dir.c:1068
+msgid " so far."
+msgstr ""
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr ""
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr ""
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr ""
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr ""
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr ""
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr ""
+
+#: file.c:811
+msgid "Current time"
+msgstr ""
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr ""
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr ""
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr ""
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr ""
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr ""
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr ""
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr ""
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr ""
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr ""
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr ""
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr ""
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr ""
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr ""
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr ""
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr ""
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr ""
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr ""
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr ""
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr ""
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr ""
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr ""
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr ""
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr ""
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr ""
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr ""
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr ""
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr ""
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr ""
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr ""
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr ""
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr ""
+
+#: function.c:2601
+#, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr ""
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr ""
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr ""
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr ""
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr ""
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr ""
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr ""
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr ""
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr ""
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr ""
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr ""
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr ""
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr ""
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr ""
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr ""
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr ""
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr ""
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr ""
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr ""
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr ""
+
+#: job.c:488
+msgid " (ignored)"
+msgstr ""
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr ""
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr ""
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr ""
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr ""
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr ""
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr ""
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr ""
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr ""
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr ""
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ""
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr ""
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr ""
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ""
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr ""
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr ""
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr ""
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr ""
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr ""
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr ""
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr ""
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr ""
+
+#: main.c:313
+msgid "Options:\n"
+msgstr ""
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr ""
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr ""
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr ""
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr ""
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr ""
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr ""
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr ""
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr ""
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr ""
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr ""
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr ""
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr ""
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr ""
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr ""
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr ""
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr ""
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr ""
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr ""
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr ""
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr ""
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr ""
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr ""
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr ""
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr ""
+
+#: main.c:2511
+msgid "No targets"
+msgstr ""
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr ""
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr ""
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr ""
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr ""
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr ""
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr ""
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr ""
+
+#: misc.c:622
+msgid "User access"
+msgstr ""
+
+#: misc.c:670
+msgid "Make access"
+msgstr ""
+
+#: misc.c:704
+msgid "Child access"
+msgstr ""
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr ""
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr ""
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr ""
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr ""
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr ""
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr ""
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr ""
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr ""
+
+#: output.c:495 output.c:497
+msgid "write error: stdout"
+msgstr ""
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ""
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr ""
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr ""
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr ""
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr ""
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr ""
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr ""
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr ""
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr ""
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr ""
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr ""
+
+#: read.c:1131
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr ""
+
+#: read.c:1133
+msgid "missing separator"
+msgstr ""
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr ""
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr ""
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr ""
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr ""
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr ""
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr ""
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr ""
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr ""
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr ""
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr ""
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr ""
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr ""
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr ""
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr ""
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr ""
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr ""
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ""
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+
+#: read.c:2229
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr ""
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr ""
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr ""
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr ""
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr ""
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr ""
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr ""
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr ""
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr ""
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr ""
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr ""
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr ""
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr ""
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr ""
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr ""
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr ""
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr ""
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr ""
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ""
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr ""
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr ""
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ""
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr ""
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr ""
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr ""
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr ""
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr ""
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ""
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr ""
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr ""
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr ""
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr ""
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ""
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr ""
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+
+#: rule.c:522
+msgid " terminal."
+msgstr ""
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr ""
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr ""
+
+#: signame.c:92
+msgid "Hangup"
+msgstr ""
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr ""
+
+#: signame.c:98
+msgid "Quit"
+msgstr ""
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr ""
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr ""
+
+#: signame.c:109
+msgid "Aborted"
+msgstr ""
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr ""
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr ""
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr ""
+
+#: signame.c:121
+msgid "Killed"
+msgstr ""
+
+#: signame.c:124
+msgid "Bus error"
+msgstr ""
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr ""
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr ""
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr ""
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr ""
+
+#: signame.c:139
+msgid "Terminated"
+msgstr ""
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr ""
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr ""
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr ""
+
+#: signame.c:156
+msgid "Power failure"
+msgstr ""
+
+#: signame.c:159
+msgid "Stopped"
+msgstr ""
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr ""
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr ""
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr ""
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr ""
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr ""
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr ""
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr ""
+
+#: signame.c:186
+msgid "Window changed"
+msgstr ""
+
+#: signame.c:189
+msgid "Continued"
+msgstr ""
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr ""
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr ""
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr ""
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr ""
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr ""
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr ""
+
+#: signame.c:217
+msgid "Information request"
+msgstr ""
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr ""
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+
+#: variable.c:1599
+msgid "automatic"
+msgstr ""
+
+#: variable.c:1602
+msgid "default"
+msgstr ""
+
+#: variable.c:1605
+msgid "environment"
+msgstr ""
+
+#: variable.c:1608
+msgid "makefile"
+msgstr ""
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr ""
+
+#: variable.c:1614
+msgid "command line"
+msgstr ""
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr ""
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr ""
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr ""
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr ""
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr ""
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr ""
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr ""
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr ""
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr ""
+
+#: vmsjobs.c:501
+#, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr ""
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr ""
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr ""
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr ""
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr ""
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr ""
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr ""
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
diff --git a/po/nl.gmo b/po/nl.gmo
new file mode 100644
index 0000000..74e6381
--- /dev/null
+++ b/po/nl.gmo
diff --git a/po/nl.po b/po/nl.po
new file mode 100644
index 0000000..56bcb1c
--- /dev/null
+++ b/po/nl.po
@@ -0,0 +1,2334 @@
+# Dutch translations for GNU make.
+# Copyright (C) 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# « A quoi bon cette forfanterie? »
+#
+# Taco Witte <tcwitte@cs.uu.nl>, 2004.
+# Benno Schulenberg <benno@vertaalt.nl>, 2005, 2006, 2007, 2010, 2013.
+msgid ""
+msgstr ""
+"Project-Id-Version: make-4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-09 21:18+0200\n"
+"Last-Translator: Benno Schulenberg <benno@vertaalt.nl>\n"
+"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
+"Language: nl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.0\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "poging tot gebruik van niet-ondersteunde functie: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "het 'touchen' van een archiefonderdeel is niet mogelijk op VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: archief '%s' bestaat niet"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s' is geen geldig archief"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: onderdeel '%s' bestaat niet in '%s'"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: ar_member_touch() van '%s' is mislukt"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"uitpakken van module-info door lbr$set_module() is mislukt, afsluitwaarde= %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() is mislukt, afsluitwaarde = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "kan bibliotheek '%s' niet openen om onderdeel '%s' op te zoeken"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Onderdeel '%s'%s: %ld bytes bij %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (naam kan afgekapt zijn)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Datum %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modus = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Recept bevat te veel regels (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Afgebroken.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Archiefonderdeel '%s' kan onecht zijn; niet verwijderd"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Archiefonderdeel '%s' kan onecht zijn; niet verwijderd"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Verwijderen van bestand '%s'"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Verwijderen van bestand '%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  uit te voeren recept"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (ingebouwd):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (uit '%s', regel %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Mappen\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# kan status van %s niet opvragen.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (sleutel %s, wijzigingstijd %d): kan niet worden geopend.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (apparaat %d, inode [%d,%d,%d]): kan niet worden geopend.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (apparaat %ld, inode %ld): kan niet worden geopend.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (sleutel %s, wijzigingstijd %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (apparaat %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (apparaat %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Geen"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " bestanden, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "geen"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " onmogelijkheden"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " tot nu toe."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " onmogelijkheden in %lu mappen.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Recursieve variabele '%s' verwijst naar zichzelf (uiteindelijk)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "onafgemaakte verwijzing naar variabele"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Recept voor bestand '%s' is opgegeven in %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Recept voor bestand '%s' werd gevonden via impliciet zoeken,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "maar '%s' wordt nu als hetzelfde bestand beschouwd als '%s'."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Recept voor '%s' zal worden genegeerd ten gunste van die voor '%s'."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "kan enkeldubbelpunts '%s' niet hernoemen tot dubbeldubbelpunts '%s'"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "kan dubbeldubbelpunts '%s' niet hernoemen tot enkeldubbelpunts '%s'"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Verwijderen van tussentijds bestand '%s'"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Verwijderen van tussentijdse bestanden...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Huidige tijd"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Tijdsstempel ligt buiten bereik; wordt vervangen door %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Is geen doel:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Waardevol bestand (vereiste van .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Nepdoel (vereiste van .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Doel afkomstig van opdrachtregel."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+"#  Een standaard Makefile, of eentje via MAKEFILES of '-include/sinclude'."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Ingebouwde regel"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Impliciete regel-zoekopdracht is uitgevoerd."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Impliciete regel-zoekopdracht is niet uitgevoerd."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Impliciete/statische patroonstam: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Bestand is een tussentijds vereiste."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Maakt ook:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Wijzigingstijd is nooit gecontroleerd."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Bestand bestaat niet."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Bestand is erg oud."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Laatst gewijzigd %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Bestand is bijgewerkt."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Bestand is niet bijgewerkt."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Nog lopend recept (DIT IS EEN PROGRAMMAFOUT)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Nog lopende receptafhankelijkheden (DIT IS EEN PROGRAMMAFOUT)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Met succes bijgewerkt."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Moet worden bijgewerkt ('-q' is ingesteld)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Bijwerken is mislukt."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Ongeldige waarde in 'command_state'-onderdeel!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Bestanden"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# hashtabel-statistieken van bestanden:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Veld '%s' is niet gecached: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "niet-numeriek eerste argument van 'word'-functie"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "eerste argument van 'word'-functie moet groter zijn dan 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "niet-numeriek eerste argument van 'wordlist'-functie"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "niet-numeriek tweede argument van 'wordlist'-functie"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): DuplicateHandle(In) is mislukt (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): DuplicateHandle(Err) is mislukt (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() is mislukt (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() is mislukt\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Opschonen van tijdelijk batch-bestand %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open(): %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "write(): %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Ongeldige bestandsbewerking: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "onvoldoende aantal argumenten (%d) voor functie '%s'"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "niet-geïmplementeerd op dit platform: functie '%s'"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "onafgemaakte aanroep van functie '%s': '%c' ontbreekt"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Lege functienaam\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Ongeldige functienaam: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Functienaam is te lang: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Ongeldig minimumaantal argumenten (%d) voor functie '%s'\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Ongeldig maximumaantal argumenten (%d) voor functie '%s'\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: optie '%s' is niet eenduidig\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: optie '--%s' staat geen argument toe\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: optie '%c%s' staat geen argument toe\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: optie '%s' vereist een argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: onbekende optie '--%s'\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: onbekende optie '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: ongeldige optie -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: ongeldige optie -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: optie vereist een argument -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: optie '-W %s' is niet eenduidig\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: optie '-W %s' staat geen argument toe\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Expanderen van '%s'\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Evalueren van '%s'\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"kan %lu bytes voor hashtabel niet reserveren: onvoldoende geheugen "
+"beschikbaar"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Belasting=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Herhash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Botsingen=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Zoeken naar impliciete regel voor '%s'.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Zoeken naar archiefonderdeel-impliciete regel voor '%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Impliciete regelrecursie wordt ontweken.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Stam is te lang: '%.*s'.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Patroonregel wordt geprobeerd met stam '%.*s'.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Onmogelijke regelvereiste '%s' wordt verworpen.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Onmogelijke impliciete vereiste '%s' wordt verworpen.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Proberen van regelvereiste '%s'.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Proberen van impliciete vereiste '%s'.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Vereiste '%s' gevonden als VPATH '%s'.\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Zoeken naar een regel met tussentijds bestand '%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Kan geen tijdelijk bestand aanmaken\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (geheugendump gemaakt)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (genegeerd)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<ingebouwd>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: recept voor doel '%s' is mislukt"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Fout %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Fout 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Wachten op onvoltooide taken..."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Levend dochterproces %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (ginds)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Beëindigen van verliezend dochterproces %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Beëindigen van winnend dochterproces %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Opschonen van tijdelijk batch-bestand %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Opschonen van tijdelijk batch-bestand %s is mislukt (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Verwijderen van dochterproces %p PID %s%s uit de ketting.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "vrijgeven van taakserver-semafoor: (Fout %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Token vrijgegeven voor dochterproces %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "schrijven naar taakserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() kan geen proces starten (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"%d argumenten geteld bij mislukte start\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Opname van dochterproces %p (%s) PID %s%s in de ketting.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "wachten op semafoor of dochterproces: (Fout %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Token verkregen voor dochterproces %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "lezen van taken-pijp"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: doel '%s' bestaat niet"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: bijwerken van doel '%s' vanwege: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "kan belastingsgrenzen niet afdwingen op dit besturingssysteem"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "kan belastingsgrens niet afdwingen: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"geen bestandshandvatten meer beschikbaar: kan standaardinvoer niet "
+"dupliceren\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"geen bestandshandvatten meer beschikbaar: kan standaarduitvoer niet "
+"dupliceren\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"geen bestandshandvatten meer beschikbaar: kan standaardfoutuitvoer niet "
+"dupliceren\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Kan standaardinvoer niet herstellen\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Kan standaarduitvoer niet herstellen\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Kan standaardfoutuitvoer niet herstellen\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"'make' heeft dochterproces met PID %s verwerkt, maar wacht nog op PID %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Opdracht niet gevonden"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Shell-programma niet gevonden"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: mogelijk geen omgevingsruimte meer beschikbaar"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL is gewijzigd (was '%s', is nu '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Maken van tijdelijk batch-bestand %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Inhoud van batch-bestand:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Inhoud van batch-bestand:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (regel %d) Onjuiste shell-context (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"Optie '-O[TYPE]' (--output-sync[=TYPE]) is niet meegecompileerd in dit "
+"programma."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Openen van globale symbolentabel is mislukt: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Geladen object %s is niet gedeclareerd als GPL-compatibel"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Laden van symbool %s uit %s is mislukt: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Lege symboolnaam om te laden: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Laden van symbool %s uit %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "De 'load'-operatie wordt op dit platform niet ondersteund."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opties:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+"  -b, -m                       (genegeerd, maar herkend wegens "
+"compatibiliteit)\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make            onvoorwaardelijk alle doelen maken\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C MAP, --directory=MAP      naar deze map gaan alvorens iets te doen\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                           veel informatie weergeven voor het debuggen\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=VLAGGEN]            verschillende soorten debuginformatie "
+"weergeven\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides  omgevingsvariabelen gaan boven Makefiles\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=TEKST                 deze TEKST als Makefile-statement evalueren\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f BESTAND, --file=BESTAND, --makefile=BESTAND\n"
+"                               het gegeven bestand als Makefile gebruiken\n"
+"\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                   deze hulptekst tonen en stoppen\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors          alle fouten in recepten negeren\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I MAP, --include-dir=MAP    deze map doorzoeken naar ingesloten "
+"Makefiles\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]           het uitvoeren van N taken tegelijk toestaan;\n"
+"                               zonder N is het aantal onbeperkt\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going             doorgaan als een doel niet gemaakt kan "
+"worden\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                               alleen extra taken starten als de\n"
+"                               systeembelasting lager is dan N\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times    van een symbolische koppeling en zijn doel\n"
+"                               de laatste wijzigingstijd gebruiken\n"
+"\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                               recepten niet uitvoeren, alleen weergeven\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o BESTAND, --old-file=BESTAND, --assume-old=BESTAND\n"
+"                               BESTAND als oud beschouwen, niet opnieuw "
+"maken\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                               uitvoer van parallelle taken synchroniseren "
+"op TYPE\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base        interne gegevensbank van 'make' weergeven\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question               geen recepten uitvoeren; de afsluitwaarde\n"
+"                               geeft aan of alles bijgewerkt is\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules       ingebouwde impliciete regels uitzetten\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables   ingebouwde instellingen van variabelen "
+"uitzetten\n"
+"\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet        recepten niet weergeven\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr "  -S, --no-keep-going, --stop  optie '-k' uitzetten\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                  doelen aanraken in plaats van opnieuw maken\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                      tracing-informatie weergeven\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version                programmaversie tonen en stoppen\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory        de huidige map weergeven\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory         optie '-w' uitzetten, ook als deze impliciet\n"
+"                               was aangezet\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W BESTAND, --what-if=BESTAND, --new-file=BESTAND, --assume-new=BESTAND\n"
+"                               BESTAND als oneindig nieuw beschouwen\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables   waarschuwen als naar een ongedefinieerde\n"
+"                               variabele wordt verwezen\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "lege tekenreeks is ongeldig als bestandsnaam"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "onbekende aanduiding '%s' voor debug-niveau"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "onbekend uitvoersynchronisatie-type: '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Onderbreking/uitzondering gekregen (code = 0x%lx, adres = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Filter voor onbehandelde uitzondering is aangeroepen vanuit programma %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Toegangsrechtenovertreding: schrijfopdracht op adres 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Toegangsrechtenovertreding: leesopdracht op adres 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() stelt default_shell = %s in\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"find_and_set_shell() stelt na doorzoeken van pad default_shell = %s in\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s slaapt gedurende 30 seconden..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "klaar met 30 seconden slapen.  Make gaat verder.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"*interne fout*: kan taakserver-semafoor '%s' niet openen: (Fout %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Taakservercliënt (semafoor %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "*interne fout*: ongeldige tekenreeks '%s' voor '--jobserver-fds'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Taakservercliënt (bestandsdescriptor %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"Waarschuwing: '-jN' is afgedwongen in een deelproces: taakserver-modus "
+"uitgezet."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dubbele taakserver"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"Waarschuwing: taakserver is onbeschikbaar: '-j1' wordt gebruikt.  Voeg '+' "
+"toe aan de ouderregel."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile op standaardinvoer is dubbel opgegeven."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (tijdelijk bestand)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (tijdelijk bestand)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Parallelle taken (-j) worden op dit platform niet ondersteund."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Opnieuw instellen op enkele-taakmodus (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Taakserver-plaatsen zijn beperkt tot %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "aanmaken van taakserver-semafoor: (Fout %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "aanmaken van taken-pijp"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "initialiseren van taakserver-pijp"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+"Symbolische koppelingen worden niet ondersteund: '-L' wordt uitgeschakeld."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Bijwerken van Makefiles...\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefile '%s' bevat mogelijk een lus; wordt niet opnieuw gemaakt.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Opnieuw maken van Makefile '%s' is mislukt."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Ingesloten Makefile '%s' is niet gevonden."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefile '%s' is niet gevonden."
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Kan niet terugkeren naar oorspronkelijke map."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Opnieuw uitvoeren[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "verwijderen (van tijdelijk bestand): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL bevat meer dan één doel"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Geen doelen opgegeven en geen Makefile gevonden"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Geen doelen"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Bijwerken van doelen...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"Waarschuwing:  Klokafwijking geconstateerd.  Het maken is mogelijk "
+"onvolledig gebeurd."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Gebruik:  %s [OPTIES] [DOEL]...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Dit programma is gecompileerd voor %s.\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Dit programma is gecompileerd voor %s (%s).\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Rapporteer programmafouten aan <bug-make@gnu.org>,\n"
+"meld gebreken in de vertaling aan <vertaling@vrijschrift.org>.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "de optie '%s%sc' vereist een niet-lege tekenreeks als argument"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "de optie '-%c' vereist een positief geheel getal als argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sDit programma is gecompileerd voor %s.\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sDit programma is gecompileerd voor %s (%s).\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicentie GPLv3+: GNU GPL versie 3 of nieuwer <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sDit is vrije software: u mag het vrijelijk wijzigen en verder "
+"verspreiden.\n"
+"%sEr is GEEN GARANTIE, voor zover de wet dit toestaat.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make-gegevensbank, weergegeven op %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Make-gegevensbank voltooid op %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Onbekende fout %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: gebruiker %lu (echt %lu), groep %lu (echt %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Toegang geïnitialiseerd"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Gebruikerstoegang"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make-toegang"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Dochterprocestoegang"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Een onbekende map wordt binnengegaan\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Een onbekende map wordt verlaten\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Map '%s' wordt binnengegaan\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Map '%s' wordt verlaten\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Een onbekende map wordt binnengegaan\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Een onbekende map wordt verlaten\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Map '%s' wordt binnengegaan\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Map '%s' wordt verlaten\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "schrijffout: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Gestopt.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Lezen van Makefiles...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Lezen van Makefile '%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (geen standaarddoel)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (zoekpad)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (maakt niet uit)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (geen expansie van ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "UTF-8 BOM in Makefile '%s' wordt overgeslagen\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "UTF-8 BOM in Makefile-buffer wordt overgeslagen\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "ongeldige syntaxis in voorwaardelijk deel"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: laden is mislukt"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "recept begint voor eerste doel"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "ontbrekende regel vóór recept"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (bedoelde u TAB in plaats van 8 spaties?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "ontbrekend scheidingsteken%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "ontbrekend doelpatroon"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "meerdere doelpatronen"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "doelpatroon bevat geen '%%'"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "ontbrekende 'endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "lege naam van variabele"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "extra tekst na 'define'-opdracht"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "ontbrekende 'endef', onafgemaakte 'define'"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "extra tekst na 'endef'-opdracht"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "extra tekst na '%s'-opdracht"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "extra '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "slechts één 'else' per voorwaardelijk deel"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Onjuiste doelspecifieke variabele-definitie"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "vereisten kunnen niet in recepten gedefinieerd worden"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "gemengde impliciete en statische patroonregels"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "gemengde impliciete en normale regels"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "doel '%s' komt niet overeen met doelpatroon"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "doelbestand '%s' heeft zowel ':'- als '::'-items"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "doel '%s' is meerdere keren gegeven in dezelfde regel"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "Waarschuwing: er wordt voorbijgegaan aan recept voor doel '%s'"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "Waarschuwing: oud recept voor doel '%s' wordt genegeerd"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "gemengde impliciete en normale regels"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "Waarschuwing: NUL-teken gezien; de rest van de regel wordt genegeerd"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Er hoeft niets gedaan te worden voor '%s'."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' is up-to-date."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Snoeien van bestand '%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sEr is geen regel om doel '%s' te maken, nodig voor '%s'%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sEr is geen regel om doel '%s' te maken%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Doelbestand '%s' wordt overwogen.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Bijwerken van bestand '%s' is recent geprobeerd en mislukt.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Bestand '%s' was al overwogen.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Bestand '%s' wordt nog bijgewerkt.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Bijwerken van bestand '%s' is voltooid.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Bestand '%s' bestaat niet.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Waarschuwing: .LOW_RESOLUTION_TIME-bestand '%s' heeft een hoge-resolutie "
+"tijdsstempel"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Impliciete regel voor '%s' gevonden.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Geen impliciete regel voor '%s' gevonden.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Standaardrecept wordt gebruikt voor '%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Circulaire afhankelijkheid %s <- %s is verworpen."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Vereisten van doelbestand '%s' zijn voltooid.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "De vereisten van '%s' worden nu gemaakt.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Pogingen voor doelbestand '%s' worden gestaakt.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Doel '%s' is niet opnieuw gemaakt vanwege fouten."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Vereiste '%s' is alleen-ordenen voor doel '%s'.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Vereiste '%s' van doel '%s' bestaat niet.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Vereiste '%s' is nieuwer dan doel '%s'.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Vereiste '%s' is ouder dan doel '%s'.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Doel '%s' is dubbeldubbelpunts en heeft geen vereisten.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Er is geen recept voor '%s', en geen van de vereisten is veranderd.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Maken van '%s' vanwege 'always-make'-vlag.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Doel '%s' hoeft niet opnieuw gemaakt te worden"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; VPATH-naam '%s' wordt gebruikt"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Doel '%s' moet opnieuw gemaakt worden.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  VPATH-naam '%s' wordt genegeerd.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Recept van '%s' wordt nu uitgevoerd.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Opnieuw maken van doelbestand '%s' is mislukt.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Doelbestand '%s' is met succes opnieuw gemaakt.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Doelbestand '%s' moet opnieuw worden gemaakt onder '-q'.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Standaardopdrachten worden gebruikt voor '%s'.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Waarschuwing: bestand '%s' heeft een wijzigingstijd in de toekomst"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+"Waarschuwing: bestand '%s' heeft een wijzigingstijd %s seconden in de "
+"toekomst"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS-element '%s' is geen patroon"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs kan niet exporteren: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Impliciete regels"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Geen impliciete regels."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u impliciete regels, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "PROGRAMMAFOUT: num_pattern_rules() is verkeerd!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "onbekend signaal"
+
+# Vroeger ging dit over het afsluiten van een modemverbinding,
+# tegenwoordig over het afsluiten van een pseudoterminal.
+#: signame.c:92
+msgid "Hangup"
+msgstr "Opgehangen"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Onderbroken"
+
+# Verleden tijd, "Afgesloten", net als de andere actiesignaalnamen.
+#: signame.c:98
+msgid "Quit"
+msgstr "Afgesloten"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Ongeldige instructie"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Traceer/breekpunt-instructie"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Afgebroken"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT-instructie"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT-instructie"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Drijvendekomma-berekeningsfout"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Geëlimineerd"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Busfout"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Segmentatiefout"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Onjuiste systeemaanroep"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Gebroken pijp"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Wekker"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Beëindigd"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Gebruikergedefinieerd signaal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Gebruikergedefinieerd signaal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Dochterproces is afgesloten"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Stroomstoring"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Gepauzeerd"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Gepauzeerd (terminalinvoer)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Gepauzeerd (terminaluitvoer)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Gepauzeerd (signaal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Limiet op processortijd is overschreden"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Limiet op bestandsgrootte is overschreden"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtuele timer is afgelopen"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Timer voor profilering is afgelopen"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Venster is veranderd"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Doorgegaan"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Urgente in-/uitvoertoestand"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "In-/uitvoer is mogelijk"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Hulpbron verloren"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Gevaarsignaal"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Verzoek om informatie"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Drijvendekomma-coprocessor is niet beschikbaar"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Geen 'strcache'-buffers\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s 'strcache'-buffers: %lu (%lu) / strings = %lu / opslag = %lu B / "
+"gemiddeld = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s huidig buffer: grootte = %hu B / gebruikt = %hu B / aantal = %hu / "
+"gemiddeld = %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+"%s andere gebruikte: totaal = %lu B / aantal = %lu / gemiddeld = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s andere vrij: totaal = %lu B / max = %lu B / min = %lu B / gemiddeld = %hu "
+"B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s 'strcache'-prestatie: lookups = %lu / treffersverhouding = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# hashtabel-statistieken van bestanden:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatisch"
+
+#: variable.c:1602
+msgid "default"
+msgstr "standaard"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "omgeving"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "Makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "omgeving onder -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "opdrachtregel"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "'override'-opdracht"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (uit '%s', regel %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# Statistieken van hashtabel van variabelenverzameling:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variabelen\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Patroonspecifieke variabelewaarden"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Geen patroonspecifieke variabelewaarden"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u patroonspecifieke variabelewaarden"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "Waarschuwing: ongedefinieerde variabele '%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() is mislukt met afsluitwaarde %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Waarschuwing: lege omleiding\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "*interne fout*: '%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-waarschuwing: mogelijk dient u CTRL-Y-afhandeling opnieuw aan te zetten "
+"vanuit DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "INGEBOUWD [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "INGEBOUWDE CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "INGEBOUWDE CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Onbekende ingebouwde opdracht '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Fout: lege opdracht\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Invoer wordt omgeleid van %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Foutuitvoer wordt omgeleid naar %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Uitvoer wordt toegevoegd aan %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Uitvoer wordt omgeleid naar %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Toevoegen van %.*s en opschoning\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "In plaats daarvan wordt %s uitgevoerd\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Fout bij proces-start, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH-zoekpaden\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Geen 'vpath'-zoekpaden."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u 'vpath'-zoekpaden.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Geen algemeen zoekpad ('VPATH'-variabele)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Algemeen zoekpad ('VPATH'-variabele):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "*interne fout*: meerdere opties '--sync-mutex'"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "*interne fout*: meerdere opties '--jobserver-fds'"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "onvoldoende geheugen beschikbaar"
+
+#~ msgid "write error"
+#~ msgstr "schrijffout"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "INGEBOUWDE RM %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  Ongeldige waarde in 'update_status'-onderdeel!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "onbekende trace-modus '%s'"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Fout 0x%x (genegeerd)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Recept uit %s:%lu wordt aangeroepen om doel '%s' bij te werken.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Ingebouwd recept wordt aangeroepen om doel '%s' bij te werken.\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s Aantal strcache-buffers: %d (* %d bytes/buffer = %d bytes)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# strcache-hashtabel-statistieken:\n"
+#~ "# "
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() kan geen proces starten (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sDit is vrije programmatuur; zie de brontekst voor de "
+#~ "kopieervoorwaarden.\n"
+#~ "%sEr is GEEN garantie; zelfs niet voor VERHANDELBAARHEID of\n"
+#~ "%sGESCHIKTHEID VOOR EEN BEPAALD DOEL.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "extra 'endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "lege 'override'-opdracht"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "ongeldige 'override'-opdracht"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-waarschuwing: CTRL-Y zal subproces(sen) achterlaten.\n"
diff --git a/po/pl.gmo b/po/pl.gmo
new file mode 100644
index 0000000..f7eb848
--- /dev/null
+++ b/po/pl.gmo
diff --git a/po/pl.po b/po/pl.po
new file mode 100644
index 0000000..5476e85
--- /dev/null
+++ b/po/pl.po
@@ -0,0 +1,2259 @@
+# Polish translation for GNU make.
+# Copyright (C) 1996, 2002, 2005, 2006, 2010, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Paweł Krawczyk <kravietz@ceti.pl>, 1996.
+# Jakub Bogusz <qboosh@pld-linux.org>, 2002-2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-13 10:48+0200\n"
+"Last-Translator: Jakub Bogusz <qboosh@pld-linux.org>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"Language: pl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "próba użycia nieistniejącej funkcji: '%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "element biblioteki `touch' jest niedostępny pod VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Archiwum '%s' nie istnieje"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: '%s' nie jest poprawnym archiwum"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Brak elementu '%s' w '%s'"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Błędny kod powrotu z ar_member_touch w '%s'"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"Uzyskanie informacji o module przez lnr$set_module() nie udało się, status = "
+"%d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() nie powiodło się, status = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "błąd otwarcia biblioteki '%s' podczas szukania elementu '%s'"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Element '%s'%s: %ld bajtów pod %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (nazwa może zostać okrojona)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Data %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Polecenia mają za dużo linii (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Przerwano.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Element archiwum '%s' może być fałszywy; nie usunięty"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Element archiwum '%s' może być fałszywy; nie usunięty"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] KasujÄ™ plik '%s'"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** KasujÄ™ plik '%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  polecenia do wykonania"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (wbudowane):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (z '%s', linia %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Katalogi\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: stat() zwraca błąd.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (klucz %s, czas modyfikacji %d): otwarcie było niemożliwe.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (urządzenie %d, i-węzeł [%d,%d,%d]): otwarcie było niemożliwe.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (urządzenie %ld, i-węzeł %ld): otwarcie było niemożliwe.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (klucz %s, czas modyfikacji %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (urządzenie %d, i-węzeł [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (urządzenie %ld, i-węzeł %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Nie"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " pliki, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "nie"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " niemożliwości"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " jak dotÄ…d."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " niemożliwości w %lu katalogach.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Rekurencyjna zmienna '%s' wskazuje na samÄ… siebie"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "niezakończone odwołanie do zmiennej"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Polecenia dla pliku '%s' podano w %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Polecenia dla pliku '%s' zostały wyznaczone na podstawie reguł standardowych,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "ale '%s' jest teraz uznawany za ten sam plik co '%s'."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Polecenia dla '%s' zostaną zignorowane na rzecz poleceń dla '%s'."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"nie można przemianować '%s' z pojedynczym dwukropkiem na '%s' z podwójnym"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"nie można przemianować '%s' z podwójnym dwukropkiem na '%s' z pojedynczym"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Kasowanie pliku pośredniego '%s'"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Kasowanie plików pośrednich...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Aktualny czas"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Oznaczenie czasu spoza zakresu; zastÄ…piono %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# To nie jest obiekt:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Cenny plik (zależność .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Obiekt niejawny (zależność .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Obiekt podany w linii poleceń."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Makefile domyślny, wymieniony w MAKEFILES lub -include/sinclude."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Reguła wbudowana"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Szukanie reguł domyślnych zostało wykonane."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Szukanie reguł domyślnych nie zostało wykonane."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Gałąź wzorców domyślnych/statycznych: '%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Plik jest zależnością przejściową."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Robi również:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Czas modyfikacji nie był sprawdzany."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Plik nie istnieje."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Plik jest bardzo stary."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Ostatnio modyfikowany %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Plik został uaktualniony."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Plik nie został uaktualniony."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Aktualnie uruchamiane polecenia (TO JEST B�ĄD)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Aktualnie uruchamiane polecenia zależności (TO JEST B�ĄD)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Uaktualnienie powiodło się."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Powinien być uaktualniony (-q jest włączone)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Uaktualnianie nie powiodło się."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Błędna wartość w elemencie 'command_state'!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Pliki"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# statystyki tablic haszujących plików:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Pole '%s' nie zapamiętane w pamięci podręcznej: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "pierwszy argument funkcji 'word' nie jest liczbowy"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "pierwszy argument funkcji 'word' musi być większy od 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "pierwszy argument funkcji 'wordlist' nie jest liczbowy"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "drugi argument funkcji 'wordlist' nie jest liczbowy"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) nie powiodło się (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) nie powiodło się (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() nie powiodło się (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() nie powiodło się\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "CzyszczÄ™ tymczasowy plik wsadowy %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "otwarcie: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "zapis: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Błędna operacja na pliku: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "niewystarczająca liczba argumentów (%d) dla funkcji '%s'"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "funkcja '%s' nie jest zaimplementowana na tej platformie"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "nie dokończone wywołanie funkcji '%s': brak '%c'"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Pusta nazwa funkcji\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Błędna nazwa funkcji: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Zbyt długa nazwa funkcji: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Błędna minimalna liczba argumentów (%d) dla funkcji %s\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Błędna maksymalna liczba argumentów (%d) dla funkcji %s\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: opcja '%s' jest niejednoznaczna\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: opcja '--%s' nie przyjmuje argumentów\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: opcja '%c%s' nie może mieć argumentów\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: opcja '%s' musi mieć argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: nieznana opcja '--%s'\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: nieznana opcja '%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: niedozwolona opcja -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: błędna opcja -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opcja musi mieć argument -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: opcja '-W %s' jest niejednoznaczna\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: opcja '-W %s' nie może mieć argumentów\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Rozwijanie '%s'\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Wyliczanie '%s'\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+"nie można przydzielić %lu bajtów na tablicę haszującą: pamięć wyczerpana"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Wypełnienie=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Przehaszowania=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Kolizje=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Szukanie standardowej reguły dla '%s'.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Szukanie standardowej reguły typu archive-member dla '%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Pomijanie rekurencyjnego wywołania reguły standardowej.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Gałąź zbyt długa: '%.*s'.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Próbowanie reguły wzorcowej z gałęzią '%.*s'.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Odrzucenie niemożliwej zależności reguły '%s'.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Odrzucenie niemożliwej zależności domyślnej '%s'.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Próbowanie zależności reguły '%s'.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Próbowanie zależności domyślnej '%s'.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Znaleziono zależność '%s' jako VPATH '%s'\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Szukanie reguły zawierającej plik przejściowy '%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Nie można utworzyć pliku tymczasowego\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (zrzut pamięci)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (zignorowano)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<wbudowane>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: polecenia dla obiektu '%s' nie powiodły się"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] BÅ‚Ä…d %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] BÅ‚Ä…d 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s]: %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Oczekiwanie na niezakończone zadania...."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Żyjący potomek %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (zdalne)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Zbieranie przegrywajÄ…cego potomka %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Zbieranie wygrywajÄ…cego potomka %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Czyszczenie tymczasowego pliku wsadowego %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Czyszczenie tymczasowego pliku wsadowego %s nie powiodło się (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Usuwanie potomka %p PID %s%s z kolejki.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "zwalnianie semafora serwera zadań: (Błąd %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Zwolniony token dla potomka %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "piszący serwer zadań"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() nie mógł uruchomić procesu (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Naliczono %d parametrów nieudanego uruchomienia\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Wstawianie potomka %p (%s) PID %s%s do kolejki.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "oczekiwanie na semafor lub proces potomny: (BÅ‚Ä…d %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Otrzymano token dla potomka %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "strumień czytający zadania"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: obiekt '%s' nie istnieje"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: uaktualnianie obiektu '%s' z powodu: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "niemożliwe wymuszenie limitów obciążenia w tym systemie"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "niemożliwe wymuszenie limitu obciążenia: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "nie ma więcej uchwytów plików: nie można powielić stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "nie ma więcej uchwytów plików: nie można powielić stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "nie ma więcej uchwytów plików: nie można powielić stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Nie można odtworzyć stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Nie można odtworzyć stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Nie można odtworzyć stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make usunÄ…Å‚ potomka pid %s, nadal czeka na pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Polecenie nie znalezione"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Nie znaleziono programu powłoki"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: mogło zabraknąć miejsca na środowisko"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL się zmienił (był '%s', jest '%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Tworzenie tymczasowego pliku wsadowego %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Zawartość pliku wsadowego:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Zawartość pliku wsadowego:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (linia %d) Zły kontekst powłoki (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"-O[TYP] (--output-sync[=TYP]) nie zostało skonfigurowane przy tym budowaniu."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Nie udało się otworzyć tablicy symboli globalnych: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Wczytany obiekt %s nie jest zadeklarowany jako kompatybilny z GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Nie udało się wczytać symbolu %s z %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Pusta nazwa symbolu do wczytania: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Wczytywanie symbolu %s z %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Operacja 'load' nie jest obsługiwana na tej platformie"
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opcje:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignorowane dla kompatybilności.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Bezwarunkowe utworzenie wszystkich obiektów.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C KATALOG, --directory=KATALOG\n"
+"                              Przejście do KATALOGu przed robieniem\n"
+"                              czegokolwiek.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Wyświetla dużo informacji diagnostycznych.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAGI]             Wyświetla różne rodzaje informacji\n"
+"                              diagnostycznych.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Zmienne środowiska przykrywają makefile.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=�AŃCUCH              Wyznacza �AŃCUCH jako instrukcję pliku "
+"makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f PLIK, --file=PLIK, --makefile=PLIK\n"
+"                              Czyta PLIK jako makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr ""
+"  -h, --help                  Wyświetla ten komunikat i kończy działanie.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Ignoruje błędy poleceń.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I KATALOG, --include-dir=KATALOG\n"
+"                              Szuka dołączanych makefile w KATALOGu.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Dopuszcza N zadań naraz; brak N oznacza brak\n"
+"                              ograniczeń.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Kontynuuj jeśli nie da się zrobić jakichś\n"
+"                              obiektów.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Nie uruchamiaj wielu zadań jeśli load nie "
+"jest\n"
+"                              poniżej N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Używanie ostatniego mtime między dowiązaniem a "
+"celem.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Nie wykonuje poleceń; jedynie je wyświetla.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o PLIK, --old-file=PLIK, --assume-old=PLIK\n"
+"                              Uznanie PLIKu za bardzo stary i nie tworzenie "
+"go\n"
+"                              ponownie.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[SPOSÓB], --output-sync[=SPOSÓB]\n"
+"                              Sposób synchronizacji wyjścia zadań "
+"równoległych.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Wyświetla wewnętrzną bazę danych make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Nie uruchamia żadnych poleceń; status powrotu\n"
+"                              wskazuje aktualność.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      Wyłącza wbudowane reguły standardowe.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Wyłącza ustawianie wbudowanych zmiennych.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Nie wypisuje poleceń.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Wyłącza -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "  -t, --touch                 Uaktualnia obiekty zamiast je robić.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Wypisywanie informacji ze śledzenia.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Wyświetla wersję make i kończy działanie.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Wyświetla aktualny katalog.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Wyłącza -w, nawet jeśli było ono włączone\n"
+"                              domyślnie.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W PLIK, --what-if=PLIK, --new-file=PLIK, --assume-new=PLIK\n"
+"                              Uznaje PLIK za nieskończenie nowy.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Ostrzega przy odwołaniach do "
+"niezdefiniowanych\n"
+"                              zmiennych.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "pusty łańcuch nie może być nazwą pliku"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "nieznany poziom diagnostyki '%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "nieznany sposób synchronizacji wyjścia '%s'"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: złapano przerwanie/wyjątek (kod = 0x%lx, adres = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Nieobsługiwany filtr wyjątku wywołany z programu %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Naruszenie praw dostępu: zapis pod adresem 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Naruszenie praw dostępu: odczyt spod adresu 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() ustawia default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() ustawia ścieżkę wyszukiwania default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s jest zawieszony na 30 sekund..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "zakończono sleep(30). Kontynuacja.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"błąd wewnętrzny: nie udało się otworzyć semafora serwera zadań '%s': (Błąd "
+"%ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Klient serwera zadań (semafor %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "błąd wewnętrzny: błędny łańcuch --jobserver-fds '%s'"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Klient serwera zadań (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "uwaga: -jN wymuszone w podzadaniu: wyłączanie trybu serwera zadań."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "duplikacja serwera zadań"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"uwaga: serwer zadań niedostępny: użycie -j1. Należy dodać `+' do nadrzędnej "
+"reguły make."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile ze standardowego wejścia podano dwukrotnie."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (plik tymczasowy)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (plik tymczasowy)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Równoległe zadania (-j) nie są obsługiwane na tej platformie"
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Przełączanie w tryb jednozadaniowy (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Pojemność serwera zadań ograniczona do %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "tworzenie semafora serwera zadań: (Błąd %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "tworzenie potoku zadań"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inicjowanie potoku serwera zadań"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Dowiązania symboliczne nie są obsługiwane: wyłączono -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Uaktualnianie plików makefile....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Plik makefile '%s' może się zapętlić; bez ponownego przetwarzania.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Nie udało się ponownie przetworzyć pliku makefile '%s'."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Nie znaleziono włączanego pliku makefile '%s'."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Nie znaleziono pliku makefile '%s'"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Niemożliwy powrót do katalogu startowego."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Ponowne uruchamianie[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (plik tymczasowy): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL zawiera więcej niż jeden cel"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nie podano obiektów i nie znaleziono makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Brak obiektów"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Uaktualnianie obiektów docelowych....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "uwaga:  Wykryto przestawienie zegara. Budowanie może być niekompletne."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Składnia: %s [opcje] [obiekt] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Ten program został zbudowany dla %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Ten program został zbudowany dla %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Błędy proszę zgłaszać na adres <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "opcja '%s%s' wymaga niepustego łańcucha jako argumentu"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "opcja '-%c' wymaga argumentu będącego liczbą całkowitą dodatnią"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sTen program został zbudowany dla systemu %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sTen program został zbudowany dla systemu %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicencja GPLv3+: GNU GPL wersja 3 lub nowsza <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sTo oprogramowanie jest wolnodostępne: można je swobodnie zmieniać i "
+"rozpowszechniać.\n"
+"%sNie ma ŻADNEJ GWARANCJI w zakresie dopuszczalnym przez prawo.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Baza danych Make, wyświetlana na %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Zakończono tworzenie bazy danych Make na %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Nieznany błąd %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: użytkownik %lu (rzeczywisty %lu), grupa %lu (rzeczywista %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Zainicjalizowany dostęp"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Dostęp użytkownika"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Dostęp make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Dostęp potomka"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Wejście do nieznanego katalogu\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Opuszczenie nieznanego katalogu\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Wejście do katalogu '%s'\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Opuszczenie katalogu '%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Wejście do nieznanego katalogu\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Opuszczenie nieznanego katalogu\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Wejście do katalogu '%s'\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Opuszczenie katalogu '%s'\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "błąd zapisu: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Stop.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Czytanie makefile...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Czytanie pliku makefile '%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (brak celu domyślnego)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (przeszukiwana ścieżka)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (nieważne)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (brak rozszerzenia ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Pominięto BOM UTF-8 w pliku makefile '%s'\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Pominięto BOM UTF-8 w buforze pliku makefile\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "błędna składnia wyrażenia warunkowego"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: nie udało się załadować"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "polecenia zaczynajÄ… siÄ™ przed pierwszym obiektem"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "brakuje reguły przed poleceniami"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (czyżby miał być TAB zamiast 8 spacji?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "brakujÄ…cy separator%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "brakujÄ…cy wzorzec obiektu"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "wielokrotne wzorce obiektu"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "wzorzec obiektu nie zawiera '%%'"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "brakujÄ…cy 'endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "pusta nazwa zmiennej"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "nadmiarowy tekst po dyrektywie 'define'"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "brakujący 'endef', niezakończone 'define'"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "nadmiarowy tekst po dyrektywie 'endef'"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "niezwiÄ…zany tekst po dyrektywie '%s'"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "nadmiarowy '%s'"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "tylko jedno 'else' w wyrażeniu warunkowym"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Źle sformułowana definicja zmiennej dla celu"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "wymagania nie mogą być definiowane w opisach poleceń"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "pomieszane standardowe i statyczne reguły wzorców"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "pomieszane standardowe i normalne reguły"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "obiekt '%s' nie pasuje do wzorca obiektu"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "plik obiektu '%s' ma pozycje i : i ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "obiekt '%s' podany wielokrotnie w tej samej regule"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "uwaga: polecenia zakrywajÄ…ce dla obiektu '%s'"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "uwaga: ignorujÄ™ stare polecenia dla obiektu '%s'"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "pomieszane standardowe i normalne reguły"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "uwaga: napotkałem na znak NUL; reszta linii zignorowana"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Nie ma nic do zrobienia w '%s'."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "'%s' jest aktualne."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Czyszczenie pliku '%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sBrak reguł do zrobienia obiektu '%s', wymaganego przez '%s'%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sBrak reguł do wykonania obiektu '%s'%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Przetwarzanie pliku obiektowego '%s'.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Już bez powodzenia próbowałem uaktualnić plik '%s'.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Plik '%s' był już przetwarzany.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Wciąż uaktualniam plik '%s'.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Skończyłem uaktualniać plik '%s'.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Plik '%s' nie istnieje.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Uwaga: plik .LOW_RESOLUTION_TIME '%s' ma dużą rozdzielczość znacznika "
+"czasu"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Znaleziono standardową regułę dla '%s'.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Brak standardowych reguł dla '%s'.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Stosowanie standardowych poleceń dla '%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Okrężna dyrektywa %s <- %s porzucona."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Zakończono zależności pliku obiektu '%s'.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Zależności '%s' są wykonywane.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Zaniechany plik obiektowy '%s'.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Obiekt '%s' nie został ponownie wykonany z powodu błędów."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Zależność '%s' dotyczy tylko kolejności dla obiektu '%s'.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Zależność '%s' obiektu '%s' nie istnieje.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Zależność '%s' jest nowsza od obiektu '%s'.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Zależność '%s' jest starsza od obiektu '%s'.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+"Obiekt '%s' jest z podwójnym dwukropkiem i nie ma żadnych zależności.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Brak poleceń dla '%s' i brak zmienionych zależności.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Tworzenie '%s' z powodu flagi always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Nie ma potrzeby ponownego robienia obiektu '%s'"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; użyto nazwy VPATH '%s'"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Konieczne ponowne wykonanie obiektu '%s'.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Zignorowano nazwÄ™ VPATH '%s'.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Uruchomiono polecenia dla '%s'.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Ponowne tworzenie pliku obiektu '%s' nie powiodło się.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Ponowne tworzenie pliku obiektu '%s' powiodło się.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Plik obiektu '%s' powinien być ponownie tworzony z opcją -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Stosowanie standardowych poleceń dla '%s'.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Uwaga: Plik '%s' ma czas modyfikacji z przyszłości"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Uwaga: Plik '%s' ma czas modyfikacji %s s w przyszłości"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Element .LIBPATTERNS '%s' nie jest wzorcem"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Zasady nie eksportowane: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Reguły stadardowe"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Brak standardowych reguł."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u standardowych reguł, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "B�ĄD: złe num_pattern_rules! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "nieznany sygnał"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Rozłączenie"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Przerwanie"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Wyjście"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Błędna instrukcja"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Pułapka śledzenia"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Przerwany"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Pułapka IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Pułapka EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "WyjÄ…tek zmiennoprzecinkowy"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Zabity"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "BÅ‚Ä…d szyny"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Naruszenie ochrony pamięci"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Błędne wywołanie systemowe"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Przerwany potok"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Budzik"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Zakończony"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Sygnał użytkownika 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Sygnał użytkownika 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Potomek powrócił"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Przerwa w zasilaniu"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Zatrzymany"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Zatrzymany (wejście z tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Zatrzymany (wyjście na tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Zatrzymany (sygnał)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Przekroczony czas CPU"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Przekroczony limit wielkości pliku"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Wyczerpany stoper wirtualny"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Wyczerpany stoper profilujÄ…cy"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Zmienione okno"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Kontynuowany"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Nagła sytuacja I/O"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O możliwe"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Zaginione zasoby"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Sygnał niebezpieczeństwa"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Żądanie informacji"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Koprocesor obliczeń zmiennoprzecinkowych niedostępny"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Brak buforów strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s bufory strcache: %lu (%lu) / łańcuchów = %lu / miejsce = %lu B / śr = %lu "
+"B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s bieżący buf: rozmiar = %hu B / użyty = %hu B / liczba = %hu / śr = %hu B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s pozostałe użyte: razem = %lu B / liczba = %lu / śr = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s pozostałe wolne: razem = %lu B / maks = %lu B / min = %lu B / śr = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s wydajność strcache: wyszukiwań = %lu / wsp. trafień = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# statystyki tablic haszujÄ…cych:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatyczna"
+
+#: variable.c:1602
+msgid "default"
+msgstr "domyślna"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "środowiskowa"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "środowisko pod -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "z linii poleceń"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "dyrektywa 'override'"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (z '%s', linia %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statystyki tablic haszujÄ…cych ustawionych zmiennych:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Zmienne\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Wartości zmiennych dla wzorca"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Brak wartości zmiennych dla wzorca."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u wartości zmiennych dla wzorca"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "uwaga: niezdefiniowana zmienna '%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() nie powiodło się - %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Uwaga: Puste przekierowanie\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "błąd wewnętrzny: command_state '%s'"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-uwaga, będzie trzeba ponownie umożliwić obsługę CTRL-Y z DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "WBUDOWANE [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "WBUDOWANE CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "WBUDOWANE CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Nieznane polecenie wbudowane '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "BÅ‚Ä…d, puste polecenie\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Przekierowane wejście z %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Przekierowane wyjście diagnostyczne do %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Dołączanie wyjścia do %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Przekierowane wyjście do %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Dołączanie %.*s i czyszczenie\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Zamiast tego wykonywanie %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "BÅ‚Ä…d podczas uruchamiania, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Ścieżki przeszukiwania VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Brak ścieżek przeszukiwania 'vpath'"
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u ścieżek przeszukiwania 'vpath'.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Brak ogólnej (zmienna 'VPATH') ścieżki przeszukiwania."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Ogólna (zmienna 'VPATH') ścieżka przeszukiwania:\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "błąd wewnętrzny: wiele opcji --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "błąd wewnętrzny: wiele opcji --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "brak pamięci wirtualnej"
+
+#~ msgid "write error"
+#~ msgstr "błąd zapisu"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "WBUDOWANE RM %s\n"
diff --git a/po/pt_BR.gmo b/po/pt_BR.gmo
new file mode 100644
index 0000000..8dc66ef
--- /dev/null
+++ b/po/pt_BR.gmo
diff --git a/po/pt_BR.po b/po/pt_BR.po
new file mode 100644
index 0000000..9013dec
--- /dev/null
+++ b/po/pt_BR.po
@@ -0,0 +1,2341 @@
+# Mensagem do GNU make em Português (Brasil)
+# Copyright (C) 2000 Free Software Foundation, Inc.
+#
+# This file is distributed under the same license as the make package.
+# Fábio Henrique F. Silva <fabiohfs@mail.com>, 2000.
+# Fábio Henrique F. Silva <fabiohfs@netscape.net>, 2008, 2009, 2010, 2011, 2012, 2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 3.82\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-01-09 23:04-0300\n"
+"Last-Translator: Fábio Henrique F. Silva <fabiohfs@netscape.net>\n"
+"Language-Team: Brazilian Portuguese <ldpbr-translation@lists.sourceforge."
+"net>\n"
+"Language: pt_BR\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Poedit 1.5.4\n"
+"X-Poedit-SourceCharset: iso-8859-1\n"
+
+# Caso você encontre alguma mensagem que não está bem traduzida, por
+# favor me informe dando sua sugestão.
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "característica não suportada: `%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "o touch não está disponível no VMS"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Arquivo `%s' não existe"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: `%s' não é um arquivo válido"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: O membro `%s' não existe em `%s'"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: O ar_member_touch retornou um código de erro inválido em `%s'"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "o lbr$set_module() falhou ao obter informações do módulo, estado = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() falhou com estado = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "erro na abertura da biblioteca `%s' para localizar o membro `%s'"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Membro `%s'%s: %ld bytes de %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (o nome pode estar truncado)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Data %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, modo = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Quebra.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "** [%s] O arquivo membro `%s' pode ser falso. Não foi apagado."
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "** O arquivo membro `%s' pode ser falso. Não foi apagado."
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "** [%s] Apagando arquivo `%s'"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "** Apagando arquivo `%s'"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "# comandos a executar"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (embutido):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (de `%s', linha %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Diretórios\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: não pôde ser estabelecido.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (chave %s, mtime %d): não pôde ser aberto.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (dispositivo %d, inode [%d,%d,%d]): não pôde ser aberto.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (dispositivo %ld, inode %ld): não pôde ser aberto.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (chave %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (dispositivo %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (dispositivo %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Não"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " arquivos, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "não"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " impossibilidades"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " até agora."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " impossibilidades em %lu diretórios.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Variável recursiva `%s' faz referência a ela mesma (eventualmente)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "referência a variável não finalizada"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Os comandos especificados para o arquivo `%s' em %s:%lu,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Os comandos para o arquivo `%s' foram encontrados por uma regra implícita,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "mas `%s' é considerado o mesmo arquivo que `%s'."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Os comandos para `%s' serão ignorados em favor daqueles para `%s'."
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "não pôde renomear de dois-pontos `%s' para dois-pontos duplos `%s'"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "não pôde renomer de dois-pontos duplos `%s' para dois-pontos `%s'"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "** Apagando arquivo intermediário `%s'"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Apagando arquivo intermediário...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Hora atual"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Data/Hora fora de faixa; substituindo %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Não é um alvo:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "# Arquivo importante (prerequisito de .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "# Alvo Falso (prerequisito de .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "# Linha de Comando do Alvo."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "# Um Padrão, arquivo MAKEFILES ou -include/sinclude makefile."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Faltam as regras implícitas."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "# Pesquisa por regra implícita concluida."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "# Pesquisa por regra implícita não concluida."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "# Derivação padrão implícita/estática: `%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "# O arquivo é um pré-requisito intermediário."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "# Também faz:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "# O Período da modificação nunca foi verificado."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "# O Arquivo não existe."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "# O Arquivo está desatualizado."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "# Última modificação %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "# O Arquivo foi atualizado."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "# O Arquivo não foi atualizado."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "# Comandos em execução (ISTO É UMA FALHA)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "# Comandos de dependências em execução (ISTO É UMA FALHA)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "# Atualizado com sucesso."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "# Precisa ser atualizado (-q está definido)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "# Problemas com a atualização."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "# Valor inválido no membro `command_state' !"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Arquivos"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# tabela hash de arquivos:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "primeiro argumento não numérico para a função `word'"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "o primeiro argumento para a função `word' deve ser maior que 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "primeiro argumento não numérico para a função `wordlist'"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "segundo argumento não numérico para a função `wordlist'"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe(): DuplicateHandle(In) falhou (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_open_pipe(): DuplicateHandle(Err) falhou (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() falhou (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() falhou\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Apagando o arquivo de lote temporário %s\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "Erro de gravação: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "O número de argumentos é insuficiente (%d) para a função `%s' "
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "A função `%s' não foi implementada nesta plataforma "
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "Chamada não terminada para a função `%s': faltando `%c'"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "O número de argumentos é insuficiente (%d) para a função `%s' "
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "O número de argumentos é insuficiente (%d) para a função `%s' "
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: a opção `%s' é ambigua\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: a opção `--%s' não permite um argumento\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: a opção `%c%s' não permite um argumento\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: a opção `%s' requer um argumento\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: a opção é desconhecida `--%s'\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: a opção é desconhecida `%c%s'\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: a opção é ilegal -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: a opção é inválida -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a opção requer um argumento -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: a opção `-W %s' é ambigua\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: a opção `-W %s' não permite um argumento\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "não foi possível alocar %lu bytes para a tabela hash: memória cheia"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Carga=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Colisões=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Procurando por uma regra implícita para `%s'.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Procurando por uma regra implícita de arquivo-membro para `%s'.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Evitando recursão em regra implícita.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Tentando padrão para regra com `%.*s'.\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Rejeitando pré-requisito para regra `%s'.\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Rejeitando pré-requisitos implícitos `%s'.\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Tentanto pré-requisito para a regra `%s'.\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Tentando pré-requisito implícito `%s'.\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Pré-requisito `%s' encontrado como VPATH `%s'\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Procurando uma regra com o arquivo intermediário `%s'.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Não foi possível criar um arquivos temporário\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (arquivo core criado)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Erro %d (ignorado)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (embutido):"
+
+#: job.c:503
+#, fuzzy, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "aviso: sobreescrevendo os comandos para o alvo `%s'"
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "** [%s] Erro %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Erro 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "** Esperando que outros processos terminem."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Filho ativo %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (remoto)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Descarregando processo filho %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Descarregando processo filho %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Apagando o arquivo de lote temporário: %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Apagando o arquivo de lote temporário: %s\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Removendo o processo filho %p PID %s%s da cadeia.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Liberado sinalizador para o processo filho %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "gravar jobserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() falhou ao executar o processo (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Contados %d args na falha de execução\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Colocando o processo filho %p (%s) PID %s%s na cadeia.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Obtido o sinalizador para o processo filho %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "tarefas canalizadas lidas"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch: Arquivo `%s' não existe"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%sSem regra para processar o alvo `%s', necessário por `%s'%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "não pôde forçar os limites de carga neste sistema operacional"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "não pôde forçar a carga limite:"
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "sem manipuladores de arquivos: não é possível duplicar stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "sem manipuladores de arquivos: não é possível duplicar stdout\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "sem manipuladores de arquivos: não é possível duplicar stdin\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Não é possível restaurar stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Não é possível restaurar stdout\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Não é possível restaurar stdin\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "processo filho descarregado: pid %s, aguardando pelo pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Comando não encontrado"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Interpretador de comandos não encontrado"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: o espaço de ambiente pode estar cheio"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL alterado (era `%s' e agora é `%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Criando arquivo de lote temporário %s\n"
+
+#: job.c:3206
+#, fuzzy
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Conteúdo do arquivo de lote:%s\n"
+"\t%s\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Conteúdo do arquivo de lote:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (linha %d) contexto inválido (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Tarefas paralelas (-j) não são suportadas nesta plataforma."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Opções:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr " -b, -m                      Ignorado para compatibilidade.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+" -B, --always-make           Processa todos os alvos incondicionalmente.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+" -C DIRETÓRIO, --directory=DIRETÓRIO\n"
+"                              Muda para o DIRETÓRIO antes de fazer algo.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr " -d                          Imprime muita informação de depuração.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+" --debug[=OPÇÕES]            Imprime vários tipos de informações de "
+"depuração.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+" -e, --environment-overrides\n"
+"                              Assume os valores das variáveis de ambiente.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=STRING               Avalia a STRING como uma declaração para um "
+"makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+" -f ARQUIVO, --file=ARQUIVO, --makefile=ARQUIVO\n"
+"                              Lê o ARQUIVO como se fosse um arquivo make.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr " -h, --help                   Imprime esta mensagem e sai.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr " -i, --ignore-errors         Ignora os erros dos comandos.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+" -I DIRETÓRIO, --include-dir=DIRETÓRIO\n"
+"                              Pesquisa o DIRETÒRIO por arquivos make a "
+"incluir.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+" -j [N], --jobs[=N]          Permite N tarefas de uma vez; tarefas infinitas "
+"sem argumentos.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+" -k, --keep-going            Continua mesmo que alguns alvos não possam ser "
+"processados.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+" -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Não inicia múltiplas tarefas a menos que a "
+"carga seja menor que N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"-L, --check-symlink-times  Usa o tempo mais antigo entre o vínculo simbólico "
+"e o alvo.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+" -n, --just-print, --dry-run, --recon\n"
+"                              Não executa quaisquer comandos; apenas imprime-"
+"os.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+" -o ARQUIVO, --old-file=ARQUIVO, --assume-old=ARQUIVO\n"
+"                              Considera o ARQUIVO como muito antigo e não "
+"reprocessá-o.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+" -p, --print-data-base       Imprime o banco de dados interno do make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+" -q, --question              Não executa os comandos; O código de saida "
+"indica se está atualizado.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr " -r, --no-builtin-rules      Desabilita as regras implícitas.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+" -R, --no-builtin-variables  Desabilita a configuração das variáveis "
+"embutidas.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr " -s, --silent, --quiet       Não ecoa os comandos.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Desativa a opção -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+" -t, --touch                 Executa um `touch' nos alvos ao invés de "
+"reprocessá-los.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr " -d                          Imprime muita informação de depuração.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+" -v, --version               Imprime o número de versão do make e sai.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr " -w, --print-directory       Imprime o diretório atual.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+" --no-print-directory        Desativa a opção -w, mesmo que ela esteja "
+"implicitamente ativada.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+" -W ARQUIVO, --what-if=ARQUIVO, --new-file=ARQUIVO, --assume-new=ARQUIVO\n"
+"                              Considera o ARQUIVO infinitamente novo.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+" --warn-undefined-variables  Avisa quando um variável não definida for "
+"referenciada.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "Cadeia de caracteres vazia não é válida como nome de arquivo"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "nível de depuração desconhecido: `%s'"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Interrupção/Exceção capturada (código = 0x%lx, endereço = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Não pôde tratar o filtro de exceção chamado por %s\n"
+"CódigoExceção = %lx\n"
+"SinalExceção = %lx\n"
+"EndereçoExceção = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Violação de acesso: operação de escrita no endereço 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Violação de acesso: operação de leitura no endereço 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() definiu o default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell(), caminho de pesquisa do default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s está suspenso por 30 segundos..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) concluido. Continuando.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, fuzzy, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Cliente Jobserver (fds %d,%d)\n"
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "erro interno: valor `%s' inválido para --jobserver-fds"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Cliente Jobserver (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "aviso: -jN forçado no submake: desabilitando o modo jobserver."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr "aviso: jobserver indisponível: usando -j1. Inclua `+' na regra pai."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile na entrada padrão especificado duas vezes."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (arquivo temporário)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (arquivo temporário)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Tarefas paralelas (-j) não são suportadas nesta plataforma."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Reiniciando no modo de tarefa única (-j1)."
+
+#: main.c:1994
+#, fuzzy, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Cliente Jobserver (fds %d,%d)\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "criando canalização de tarefas"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "inicializando a canalização do jobserver"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Vínculos simbólicos não são suportados: desabilite -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Atualizando os arquivos makefiles ...\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "O arquivo `%s' pode estar em loop; não reprocessá-lo.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Problemas ao reprocessar o arquivo `%s'."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Arquivo `%s' incluido não foi encontrado."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "O arquivo `%s' não foi encontrado."
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Não foi possível voltar ao diretório original."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Re-executando[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "desvinculado (arquivos temporário): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ". DEFAULT_GOAL contém mais do que um alvo"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Nenhum alvo indicado e nenhum arquivo make encontrado"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Sem alvo"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Atualizando os objetivos finais...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "aviso: O relógio está errado. Sua compilação pode ficar incompleta."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Uso: %s [opções] [alvo] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Este programa foi compilado para %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Este programa foi compilado para %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Informe os problemas para <bug-make@gnu.org>.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "a opção `%s%s' requer um argumento não vazio"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "a opção `-%c' requer um argumento inteiro positivo"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sCompilado para %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sCompilado para %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicença GPLv3+: GNU GPL versão 3 ou posterior <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sIsto é um aplicativo livre: você pode alterá-lo e redistribui-lo "
+"livremente.\n"
+"%sNÃO HÁ GARANTIAS, exceto o que for permitido por lei.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Banco de dados do Make, impresso em %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Banco de dados do Make finalizado em %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Erro desconhecido %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: usuário %lu (real %lu), grupo %lu (real %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Acesso inicializado"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Acesso do usuário"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Acesso do make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Acesso filho"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Entrando em um diretório desconhecido\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Saindo de um diretório desconhecido\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Entrando no diretório `%s'\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Saindo do diretório `%s'\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Entrando em um diretório desconhecido\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Saindo de um diretório desconhecido\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Entrando no diretório `%s'\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Saindo do diretório `%s'\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "Erro de gravação: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Pare.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Lendo arquivos makefile ...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "Lendo arquivos makefile `%s'"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (não há objetivo padrão)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (caminho de pesquisa)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (sem importância)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (sem expansão ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "síntaxe inválida na condicional"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "comandos começam antes do primeiro alvo"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "falta uma regra antes dos comandos"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (você pensou em TAB ao invés de 8 espaços?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "faltando o separador%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "faltando o padrão dos alvos"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "múltiplos padrões para o alvo"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "padrão para o alvo não contém `%%'"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "faltando `endif'"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "nome de variável vazio"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "Texto estranho depois da diretiva `define'"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "faltando `endef', `define' não terminado"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "Texto estranho depois da diretiva `endef"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Texto estranho depois da diretiva `%s'"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "`%s' estranho"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "use apenas um `else' por condicional"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Definição de variável para o alvo mau formada"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "os pré-requisitos não podem ser definidos no comando"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "As regras implícitas e de padrão estático misturadas"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "As regras implícitas e normais misturadas"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "O alvo `%s' não coincide com o padrão"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "O arquivo alvo `%s' tem entradas : e ::"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "O alvo `%s' foi informado mais do que um vez na mesma regra."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "aviso: sobreescrevendo os comandos para o alvo `%s'"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "aviso: ignorando comandos antigos para o alvo `%s'"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "As regras implícitas e normais misturadas"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "aviso: caracter NUL detetado; o resto da linha foi ignorado"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Nada a ser feito para `%s'."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "`%s' está atualizado."
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Atualizando o arquivo `%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sSem regra para processar o alvo `%s', necessário por `%s'%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sSem regra para processar o alvo `%s'%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Considerando o arquivo alvo `%s'.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Tentativa de atualizar o arquivo `%s' falhou.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "O arquivo `%s' já foi considerado.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Ainda está atualizando o arquivo `%s'.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Atualização do arquivo `%s' concluida.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "O arquivo `%s' não existe.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Aviso: arquivo .LOW_RESOLUTION_TIME `%s' tem uma etiqueta de tempo de "
+"alta resolução"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Regra implícita encontrada para `%s'.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Nenhuma regra implícita encontrada para `%s'.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Usando os comandos padrões para `%s'.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Dependência circular %s <- %s abandonada."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Pré-requisitos do alvo `%s' concluido.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Pré-requisitos do `%s' estão sendo criados.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Desistindo do arquivo `%s'.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "O alvo `%s' não foi reprocessado por causa de erros."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Pré-requisito `%s' está ordenado para o alvo `%s'.\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Pré-requisitos `%s' do alvo `%s' não existem.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Pré-requisito `%s' é mais novo do que o alvo `%s'.\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Pré-requisito `%s' é mais antigo do que o alvo `%s'.\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "O alvo `%s' é dois-pontos duplos e não tem pré-requisitos.\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Nenhum comando para `%s' e nenhum pré-requisito foi alterado.\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Processando `%s' devido a opção always-make.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Não é necessário reprocessar o alvo `%s'"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; usando o nome VPATH `%s'"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "O alvo `%s' deve ser reprocessado.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ignorando o nome VPATH `%s'.\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Os comandos de `%s' estão rodando.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Falha ao reprocessar o alvo `%s'.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Alvo `%s' reprocessado com sucesso.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "O alvo `%s' precisa ser reprocessado sob -q.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Usando os comandos padrões para `%s'.\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "** Aviso: O arquivo `%s' está com a hora adiantada"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "** Aviso: O arquivo `%s' está com a hora %s s adiantada"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "O elemento .LIBPATTERNS `%s' não é um padrão"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customizações não exportadas: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Regras implícitas."
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Faltam as regras implícitas."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u regras implícitas, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "ERRO: num_pattern_rules errada!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "sinal desconhecido"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Desconectar"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Interrupção"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Sair"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Instrução ilegal"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Aviso Trace/breakpoint"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Abortado"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Aviso IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Aviso EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Exceção de ponto flutuante"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Finalizado"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Erro de barramento"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Falha de segmentação"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Chamada de sistema inválida"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Canalização interrompida"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Despertador"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Terminado"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Sinal 1 definido pelo usuário"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Sinal 2 definido pelo usuário"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "O Filho saiu"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Falha na Energia Elétrica"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Parado"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Parado (entrada tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Parado (saida tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Parado (sinal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Tempo de CPU excedido"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Tamanho do arquivo excedido"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Temporizador virtual expirou"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Temporizador de perfil expirou"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Janela alterada"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Continuação"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Condição de E/S urgente"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Possível E/S"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Recurso perdido"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Sinal perigoso"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Solicitação de informação"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Co-processador aritmético indisponível"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr "%s strcache usado: total = %d (%d) / max = %d / min = %d / med = %d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s strcache usado: total = %d (%d) / max = %d / min = %d / med = %d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr "%s strcache livres: total = %d (%d) / max = %d / min = %d / med = %d\n"
+
+#: strcache.c:287
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s # de cadeias em strcache: %d / pesquisados = %lu / encontrados = %lu\n"
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# tabela hash de arquivos:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automático"
+
+#: variable.c:1602
+msgid "default"
+msgstr "padrão"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "ambiente"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "ambiente sob -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "linha de comando"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "diretiva `override'"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (de `%s', linha %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# tabela hash do conjunto de variávies:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variáveis\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Valores da variável de padrões específicos"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Faltam valores para variável de padrões específicos"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u valores para variável de padrões específicos"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "aviso: variável indefinida `%.*s'"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() falhou com %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Aviso: Redireção vazia\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "erro interno: `%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-warning, pode ser preciso reativar o CTRL-Y no DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "EMBUTIDO [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "CD EMBUTIDO %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "CD EMBUTIDO %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Comando embutido desconhecido `%s'.\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Erro, comando vazio\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Entrada de %s redirecionada\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Erro redirecionado para %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Saida redirecionada para %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Saida redirecionada para %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Acrescentado %.*s e limpo\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Executando %s ao invés de\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Erro de execução, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Caminho VPATH\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# Sem caminho `vpath'."
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u caminhos `vpath'.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Sem caminho genérico (variável `VPATH')."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Caminho genérico (variável `VPATH'):\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "# Valor inválido no membro `update_status' !"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Erro 0x%x (ignorado)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Chamando os comandos de %s:%lu para atualizar o alvo `%s'.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Chamando comandos internos para atualizar o alvo `%s'.\n"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "erro interno: múltiplas opções --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "A memória virtual encheu"
+
+#~ msgid "write error"
+#~ msgstr "erro de gravação"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # de buffers strcache: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# tabela hash de arquivos:\n"
+#~ "#"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "RM EMBUTIDO %s\n"
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() falhou ao executar o processo (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sEste é um programa livre; veja o fonte para as condições de cópia.\n"
+#~ "%sNão há garantias; nem mesmo de COMERCIALIZAÇÃO OU ATENDIMENTO A UMA\n"
+#~ "%sFUNÇÃO EM PARTICULAR.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "`endef' extranho"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "diretiva `override' vazia"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "diretiva `override' inválida"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-warning, CTRL-Y sairá do(s) subprocesso(s).\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Erro de sintaxe dentro de '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "Recebido um SIGSHLD; %u processos filhos descarregados.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "Não especifique -j ou --jobs se o sh.exe não estiver disponível."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Reiniciando o make para o modo de trabalho único."
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "sem nome de arquivo para `%sinclude'"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "O alvo `%s' deixou pre-requisito padrão vazio"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Nenhum arquivo."
diff --git a/po/quot.sed b/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1�/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“�/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/ru.gmo b/po/ru.gmo
new file mode 100644
index 0000000..1954613
--- /dev/null
+++ b/po/ru.gmo
diff --git a/po/ru.po b/po/ru.po
new file mode 100644
index 0000000..624c68e
--- /dev/null
+++ b/po/ru.po
@@ -0,0 +1,2327 @@
+# Translation of make messages to Russian.
+# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# Oleg S. Tihonov <tihonov@ffke-campus.mipt.ru>, 1998.
+# Alexey Mahotkin <alexm@hsys.msk.ru>, 2001.
+# Denis Perchine <dyp@perchine.com>, 2001, 2002.
+# Pavel Maryanov <acid_jack@ukr.net>, 2009.
+# Yuri Kozlov <yuray@komyakino.ru>, 2009, 2010, 2013.
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-10 20:44+0400\n"
+"Last-Translator: Yuri Kozlov <yuray@komyakino.ru>\n"
+"Language-Team: Russian <gnu@mx.ru>\n"
+"Language: ru\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.4\n"
+"Plural-Forms:  nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "попытка и�пользовани� неподдерживаемого �ред�тва: «%s»"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "обновление времени изменени� члена архива невозможно в �и�теме VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "обновление времени изменени�: �рхив «%s» не �уще�твует"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "обновление времени изменени�: �еверный архив: «%s»"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "обновление времени изменени�: Элемент «%s» не �одержит�� в «%s»"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+"обновление времени изменени�: Функци� ar_member_touch вернула\n"
+"ошибочное значение дл� «%s»"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() не �могла извлечь информацию о модуле, �тату� = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$init_control() вернула код ошибки %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "Ошибка открыти� библиотеки «%s» дл� пои�ка �лемента «%s»"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Элемент «%s»%s: %ld байт по адре�у %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (им� может быть у�ечено)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Дата %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, mode = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "В �по�обе �лишком много �трок (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** О�танов.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Элемент архива «%s», кажет��, недей�твителен; не удалён"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Элемент архива «%s», кажет��, недей�твителен; не удалён"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Удал�ет�� файл «%s»"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Удал�ет�� файл «%s»"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  �по�об, который �ледует применить"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (в�троенные):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr "  (из «%s», �трока %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Каталоги\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: невозможно получить �ведени� вызовом stat.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (ключ %s, врем� модификации %d): невозможно открыть.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (у�трой�тво %d, inode [%d,%d,%d]): невозможно открыть.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (у�трой�тво %ld, inode %ld): невозможно открыть.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (ключ %s, врем� модификации %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (у�трой�тво %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (у�трой�тво %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "�ет"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " файлов,"
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "нет"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " недо�тижимых целей"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " на текущий момент."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " недо�тижимых целей в %lu каталогах.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Рекур�ивна� переменна� «%s» ��ылает�� �ама на �еб� (в результате)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "незавершённа� ��ылка на переменную"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Спо�об дл� файла «%s» был задан в %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Спо�об дл� файла «%s» был найден из не�вного правила,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "но «%s» и «%s» теперь �читают�� одним и тем же файлом."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Спо�об дл� «%s» игнорирует��, вме�то него будет и�пользован �по�об дл� «%s»."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"невозможно переименовать «%s» � одним двоеточием в «%s» � двум� двоеточи�ми"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"невозможно переименовать «%s» � двум� двоеточи�ми в «%s» � одним двоеточием"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Удаление промежуточного файла «%s»"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Удаление промежуточных файлов...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Текущее врем�"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Временной штамп выходит за пределы диапазона; под�тавл�ем %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# �е �вл�ет�� целью:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Ценный файл (зави�имо�ть .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  П�евдоцель (зави�имо�ть от .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Цель, вызываема� из командной �троки."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  По умолчанию, MAKEFILES, или -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "# В�троенное правило"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Производил�� пои�к не�вных правил."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Пои�к не�вных правил не производил��."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  О�нова не�вного или �татиче�кого образца: «%s»\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Файл — промежуточна� зави�имо�ть."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Собирает также:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Врем� изменени� ни разу не провер�ло�ь."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Файл не �уще�твует."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Файл очень �тарый."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Врем� по�леднего изменени� %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Файл был обновлён."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Файл не был обновлён."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  В данный момент уже примен�ет�� некий �по�об (ЭТО ОШИБК�)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+"#  В данный момент уже примен�ет�� некий �по�об по зави�имо�т�м (ЭТО ОШИБК�)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  У�пешно обновлено."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Должно быть обновлено (задан ключ -q)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Попытка обновлени� безу�пешна."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  �еверное значение члена «command_state»!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Файлы"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# �о�то�ние файлов хеш-таблицы:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Поле «%s» не кешировано: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "нечи�ловой первый аргумент функции «word»"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "первый аргумент функции «word» должен быть больше нул�"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "нечи�ловой первый аргумент функции «wordlist»"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "нечи�ловой второй аргумент функции «wordlist»"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) вернула код ошибки (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) вернула код ошибки (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() вернула код ошибки (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() завершила�ь неудачно\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Очищаю временный пакетный файл %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "открытие: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "запи�ь: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "�екорректна� операци� � файлом: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "недо�таточно аргументов (в�его %d) функции «%s»"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "не реализовано на �той платформе: функци� «%s»"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "незавершённый вызов функции «%s»: пропущено «%c»"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Пу�тое им� функции\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "�екорректное им� функции: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Слишком длинное им� функции: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "�екорректное минимальное чи�ло аргументов (в�его %d) функции %s\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "�екорректное мак�имальное чи�ло аргументов (в�его %d) функции %s\n"
+
+# Сообщени� getopt и�ключены, т.к. они отно��т�� к уже
+# у�таревшей вер�ии �той библиотеки, и и�чезнут в �ледующей вер�ии make
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: ключ «%s» не однозначен\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: ключ «--%s» должен и�пользовать�� без аргумента\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: ключ «%c%s» должен и�пользовать�� без аргумента\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: ключу «%s» требует�� аргумент\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: неизве�тный ключ «--%s»\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: неизве�тный ключ «%c%s»\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: недопу�тимый ключ -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: неверный ключ -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: ключ требует аргумент -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: ключ «-W %s» неоднозначен\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: ключ «-W %s» должен и�пользовать�� без аргумента\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: ра�шир�ет�� «%s»\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: вычи�л�ет�� «%s»\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "не удало�ь выделить %lu байт дл� хеш-таблицы: закончила�ь пам�ть"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Загружено=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Переформулировано=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Противоречий=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Пои�к не�вного правила дл� «%s».\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Пои�к не�вного правила дл� �лемента архива «%s».\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Избежание рекур�ивного вызова не�вного правила.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Слишком длинный образец: «%.*s».\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Попытка применени� правила � образцом «%.*s».\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Отвержение невозможной зави�имо�ти правила «%s».\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Отвержение невозможной не�вной зави�имо�ти «%s».\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Попытка применени� правила зави�имо�ти «%s».\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Попытка применени� не�вной зави�имо�ти «%s».\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Обнаружена зави�имо�ть «%s» в виде VPATH «%s»\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Пои�к правила � промежуточным файлом «%s».\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "�е удало�ь �оздать временный файл\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (�делан дамп пам�ти)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (игнорирование)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<в�троенное>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: ошибка выполнени� рецепта дл� цели «%s»"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Ошибка %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Ошибка 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Ожидание завершени� заданий…"
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "�езавершённый потомок %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (удалённый)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Подбирает�� неудачно завершивший��  потомок %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Подбирает�� удачно завершивший�� потомок %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Подчищаю временный пакетный файл %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Очи�тка временного пакетного файла %s завершила�ь � ошибкой (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Удал�ет�� потомок %p PID %s%s из цепочки.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "о�вобождение �емафора �ервера заданий: (ошибка %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "О�вобождён токен дл� потомка %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "запи�ь �ервера заданий"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() не �могла запу�тить проце�� (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"При неудачном запу�ке �о�читано %d аргументов\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Помещение потомка %p (%s) PID %s%s в цепочку потомков.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "ожидание �емафора или проце��а-потомка: (ошибка %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Получен токен дл� потомка %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "чтение потока заданий"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: цель «%s» не �уще�твует"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: обновление цели «%s» из-за: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "�та операционна� �и�тема не позвол�ет у�танавливать пределы загрузки"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "невозможно у�тановить пределы загрузки: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "закончили�ь файловые де�крипторы: не удало�ь �делать копию stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "закончили�ь файловые де�крипторы: не удало�ь �делать копию stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "закончили�ь файловые де�крипторы: не удало�ь �делать копию stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "�е удало�ь во��тановить stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "�е удало�ь во��тановить stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "�е удало�ь во��тановить stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make нашла завершившего�� потомка pid %s, в�ё ещё ожидает pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Команда не найдена"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Командный проце��ор не найден"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: веро�тно, закончило�ь ме�то под окружение"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "Переменна� $SHELL изменила�ь (было «%s», теперь «%s»)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Создаёт�� временный пакетный файл %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Содержимое файла пакетных заданий:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Содержимое файла пакетных заданий:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (�трока %d) Плохой контек�т командного проце��ора (!unixy && !"
+"batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[ТИП] (--output-sync[=ТИП]) не на�троен в данной �борке."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "�е удало�ь открыть глобальную таблицу �имволов: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Загруженный объект %s не объ�влено как �овме�тимый � GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "�е удало�ь загрузить �имвол %s из %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Пу�тое им� �имвола дл� загрузки: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Загружает�� �имвол %s из %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Операци� «load» не поддерживает�� на �той платформе."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Ключи:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Игнорирует�� дл� �овме�тимо�ти.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Без у�ловий отрабатывать в�е цели.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C К�Т�ЛОГ, --directory=К�Т�ЛОГ\n"
+"                              Перейти в К�Т�ЛОГ перед выполнением дей�твий.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Выводить ма��у отладочных �ообщений.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=ФЛ�ГИ]             Выводить различные типы отладочной "
+"информации.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Переменные окружени� замен�ют значени� "
+"makefile.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=СТРОК�               Вычи�лить СТРОКУ как предложение makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f Ф�ЙЛ, --file=Ф�ЙЛ, --makefile=Ф�ЙЛ\n"
+"                              И�пользовать Ф�ЙЛ в каче�тве makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Показать �ту �правку и выйти.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Игнорировать ошибки �по�обов.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I К�Т�ЛОГ, --include-dir=К�Т�ЛОГ\n"
+"                              И�кать включаемые make-файлы в К�Т�ЛОГЕ.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Запу�кать одновременно до N заданий; \n"
+"                              е�ли N не указано, чи�ло заданий "
+"неограничено.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Продолжать работу, даже е�ли некоторые цели\n"
+"                              не могут быть до�тигнуты.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]         �е запу�кать\n"
+"                               не�колько заданий, е�ли загрузка больше N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   И�пользовать по�леднее mtime при выборе между\n"
+"                              �имволиче�кими ��ылками и целью.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              �е примен�ть �по�об на �амом деле; про�то\n"
+"                              напечатать его.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o Ф�ЙЛ, --old-file=Ф�ЙЛ, --assume-old=Ф�ЙЛ\n"
+"                              Считать Ф�ЙЛ очень �тарым и не переделывать "
+"его.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[ТИП], --output-sync[=ТИП]\n"
+"                              Синхронизировать вывод параллельных\n"
+"                              заданий � типом ТИП.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+"  -p, --print-data-base       �апечатать внутреннюю базу данных make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              �е примен�ть �по�об;\n"
+"                              код завершени� показывает, в�ё ли уже "
+"�делано.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      �е и�пользовать в�троенные не�вные правила.\n"
+
+# Что такое "variable settings"?
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables   Выключить у�тановку в�троенных\n"
+"                              значений переменных.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet        �е показывать �ами �по�обы.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Отменить ключ -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 У�тановить врем� до�тупа целей в текущее,\n"
+"                              а не пере�обирать их.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Выводить тра��ировочную информацию.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Показать информацию о вер�ии и выйти.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       �апечатать текущий каталог.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Отменить ключ -w, даже е�ли он был �вно "
+"указан.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W Ф�ЙЛ, --what-if=Ф�ЙЛ, --new-file=Ф�ЙЛ, --assume-new=Ф�ЙЛ\n"
+"                              Считать Ф�ЙЛ в�егда новым.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Выдавать предупреждение при ��ылке\n"
+"                              на неопределённую переменную.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "пу�та� �трока недопу�тима в каче�тве имени файла"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "задан неизве�тный уровень отладки «%s»"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "неизве�тный тип output-sync «%s»"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: поймано прерывание или и�ключение (код = 0x%lx, адре� = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"�еобработанное и�ключение в программе %s\n"
+"Код и�ключени� = %lx\n"
+"Флаги и�ключени� = %lx\n"
+"�дре� и�ключени� = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "�арушение до�тупа: операци� запи�и по адре�у 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "�арушение до�тупа: операци� чтени� адре�а 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() у�танавливает default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell(): пои�к в пут�х у�танавливает default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s прио�танавливает�� на 30 �екунд..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) завершён. Продолжаем.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"внутренн�� ошибка: не удало�ь открыть �емафор �ервера заданий «%s»: (ошибка "
+"%ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Клиент �ервера заданий (�емафор %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "внутренн�� ошибка: неправильна� �трока --jobserver-fds «%s»"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Клиент �ервера заданий (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"предупреждение: в �уб-Makefile принудительно задан -jN; режим �ервера "
+"заданий запрещён"
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "�оздаю копию �ервера заданий"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"предупреждение: �ервер заданий недо�тупен: и�пользует�� -j1. Добавьте «+» к "
+"правилу в родитель�ком make."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile из �тандартного ввода указан дважды."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (временный файл)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (временный файл)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Параллельные задани� (-j) не поддерживают�� на �той платформе."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Возвращает�� режим одиночного задани� (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Количе�тво �лотов �ервера заданий ограничено %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "�оздание �емафора �ервера заданий: (ошибка %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "�оздаёт�� канал заданий"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "начальна� на�тройка �ервера заданий"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Символиче�кие ��ылки не поддерживают��: отмен�ет�� ключ -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Обновление make-файлов....\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Make-файл «%s», возможно, зациклен, он не будет пере�обирать��.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Попытка пере�обрать make-файл «%s» завершила�ь неудачно."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Включаемый make-файл «%s» не найден."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Make-файл «%s» не найден"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "�евозможно перейти в первоначальный каталог."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Повторное выполнение[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (временный файл)"
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL �одержит более одной цели"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "�е заданы цели и не найден make-файл"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "�ет целей"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Обновление целей результата...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "предупреждение: �еправильный ход ча�ов.  Сборка может быть неполной."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "И�пользование: %s [КЛЮЧ]... [ЦЕЛЬ]...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Эта программа �обрана дл� %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Эта программа �обрана дл� %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Сообщайте об ошибках по адре�у <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "дл� ключа «%s%s» нужно указать аргументом непу�тую �троку"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "ключ «-%c» должен и�пользовать�� � целым положительным аргументом"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sЭта программа �обрана дл� %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sЭта программа �обрана дл� %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sЛицензи� GPLv3+: GNU GPL вер�ии 3 или новее <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sЭто �вободное программное обе�печение: вы можете �вободно измен�ть его и\n"
+"%sра�про�тран�ть. �ЕТ �ИК�КИХ Г�Р��ТИЙ вне пределов, допу�тимых законом.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# База данных Make, напечатана %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Печать базы данных Make завершена %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "�еизве�тна� ошибка %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr ""
+"%s: пользователь %lu (дей�твительный %lu),\n"
+"группа %lu (дей�твительна� %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "До�туп инициализации"
+
+#: misc.c:622
+msgid "User access"
+msgstr "До�туп пользовател�"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "До�туп make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "До�туп потомка"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Вход в неизве�тный каталог\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Выход из неизве�тного каталога\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: вход в каталог «%s»\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: выход из каталога «%s»\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: вход в неизве�тный каталог\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: выход из неизве�тного каталога\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: вход в каталог «%s»\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: выход из каталога «%s»\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "ошибка запи�и: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  О�танов.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Чтение make-файлов...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Чтение make-файла «%s»"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (нет цели по умолчанию)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (путь пои�ка)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (игнорировать ошибки)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (не ра�крывать �имвол `~') "
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Пропу�к UTF-8 BOM в make-файле «%s»\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Пропу�к UTF-8 BOM в буфере make-файла\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "неверный �интак�и� в у�ловном выражении"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: не удало�ь загрузить"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "обнаружен �по�об до первого определени� цели"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "перед �по�обом от�ут�твует правило"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr "(не имели ли вы в виду TAB вме�то во�ьми пробелов?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "пропущен разделитель%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "пропущен образец цели"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "не�колько образцов цели"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "образец цели не �одержит «%%»"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "от�ут�твует «endif»"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "пу�тое им� переменной"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "излишний тек�т по�ле директивы «define»"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "от�ут�твует «endif», незавершённа� «define»"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "излишний тек�т по�ле директивы «endef»"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "Излишний тек�т по�ле директивы «%s»"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "излишн�� «%s»"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "в у�ловном выражении возможна только одна «else»"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "�еправильный формат задани� переменной цели"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "в �по�обах не могут задавать�� зави�имо�ти"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "�мешаны не�вные правила и правила �о �татиче�кими образцами"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "�мешаны не�вные и обычные правила"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "цель «%s» не �оответ�твует образцу целей"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "целевой файл «%s» имеет вхождени� и � :, и � ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "цель «%s» указана не�колько раз в одном правиле"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "предупреждение: переопределение �по�оба дл� цели «%s»"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "предупреждение: �тарый �по�об дл� цели «%s» игнорируют��"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "�мешаны не�вные и обычные правила"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "предупреждение: в�тречен �имвол NUL; игнорирует�� до конца �троки"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Цель «%s» не требует выполнени� команд."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "«%s» не требует обновлени�."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Обрезает�� файл «%s».\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%s�ет правила дл� �борки цели «%s», требуемой дл� «%s»%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s�ет правила дл� �борки цели «%s»%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Обработка целевого файла «%s».\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Предыдуща� попытка обновить файл «%s» завершила�ь неудачно.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Файл «%s» уже был обработан.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Файл «%s» обновл�ет�� в данный момент.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Обновление файла «%s» завершено.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Файл «%s» не �уще�твует.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Предупреждение: у файла «%s» параметр LOW_RESOLUTION_TIME �одержит метку "
+"времени � вы�окой точно�тью"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "�айдено не�вное правило дл� «%s».\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "�е найдено не�вного правила дл� «%s».\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "И�пользование �по�оба по умолчанию дл� «%s».\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Цикличе�ка� зави�имо�ть %s <- %s пропущена."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Обновление целей, от которых зави�ит целевой файл «%s», завершено.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Цели, от которых зави�ит «%s», в на�то�щий момент �обирают��.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "�варийный о�танов на целевом файле «%s».\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Цель «%s» не была пере�обрана из-за ошибок."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Зави�имо�ть «%s» дл� цели «%s» зави�ит от пор�дка.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Зави�имо�ть «%s» цели «%s» не �уще�твует.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Зави�имо�ть «%s» новее, чем цель «%s».\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Зави�имо�ть «%s» �тарее, чем цель «%s».\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Цель «%s» объ�влена � двум� двоеточи�ми и не имеет зави�имо�тей.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Спо�об дл� «%s» не задан, и начальные у�лови� не изменены.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Пере�борка «%s» из-за у�тановленного флага always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "�ет необходимо�ти пере�обирать цель «%s»"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; и�пользует�� VPATH-им� «%s»"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "�еобходимо пере�обрать цель «%s».\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Игнорирует�� VPATH-им� «%s».\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "В на�то�щее врем� примен�ет�� �по�об «%s».\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "�е удало�ь пере�оздать файл цели «%s».\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Целевой файл «%s» у�пешно пере�оздан.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Целевой файл «%s» требует пере�оздани� � ключом -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "И�пользование команд по умолчанию дл� «%s».\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Предупреждение: врем� изменени� файла «%s» находит�� в будущем"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Предупреждение: врем� изменени� файла «%s» находит�� в будущем (%s)"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Элемент .LIBPATTERNS «%s» не �вл�ет�� образцом"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "�е �к�портируемые на�тройки: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# �е�вные правила"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# �е�вных правил нет."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# �е�вных правил: %u, терминальных: %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " терминал."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "ОШИБК�: неверное значение num_pattern_rules! %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "неизве�тный �игнал"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Обрыв терминальной линии"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Прерывание"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "�варийное прерывание"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "�едопу�тима� ин�трукци�"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Прерывание на контрольной точке"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Прервано"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Ошибка IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Ошибка �мул�ции"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Ошибка операции � плавающей точкой"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Уничтожение"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "�еверное обращение к пам�ти"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "�арушение прав до�тупа к пам�ти"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "�еправильный �и�темный вызов"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Обрыв канала"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Сигнал по таймеру"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Завершение"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Определ�емый пользователем �игнал 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Определ�емый пользователем �игнал 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Потомок завершил работу"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Отказ питани�"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "О�танов"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "О�танов (ввод � терминала) "
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "О�танов (вывод на терминал)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "О�танов (�игнал)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Превышен предел проце��орного времени"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Превышен предел размера файла"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Виртуальное врем� и�текло"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Врем� профилировани� и�текло"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Окно изменено"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Возобновление"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "У�лови� �к�тренного ввода/вывода"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Возможен ввод/вывод"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Ре�ур� потер�н"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Сигнал опа�но�ти"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Запро� информации"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Сопроце��ор � плавающей точкой недо�тупен"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s без буферов strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s буферы strcache: %lu (%lu) / �трок = %lu / хранилище = %lu Б / �ред = %lu "
+"Б\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s текущий buf: размер = %hu Б / и�пользует�� = %hu Б / кол-во = %hu / �ред "
+"= %hu Б\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+"%s дл� другого и�пользует��: в�его = %lu Б / кол-во = %lu / �ред = %lu Б\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s дл� другого �вободно: в�его = %lu Б / мак�. = %lu Б / мин. = %lu Б / "
+"�ред. = %hu Б\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s производительно�ть strcache: пои�ков = %lu / найдено = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# �о�то�ние хеш-таблицы:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "автоматиче�ка�"
+
+#: variable.c:1602
+msgid "default"
+msgstr "по умолчанию"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "определена в �реде"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "make-файл"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "окружение � -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "определена в командной �троке"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "Директива «override»"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (из «%s», �трока %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# �о�то�ние переменных в хеш-таблице:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Переменные\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Значени� переменных о�обенные дл� ма�ки"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# �ет значений переменных о�обенных дл� ма�ки."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u значений переменных о�обенных дл� ма�ки"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "предупреждение: неопределённа� переменна� «%.*s»"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() вернула код ошибки %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Предупреждение: Пу�тое перенаправление\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "внутренн�� ошибка: «%s» command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-предупреждение, возможно вам потребует�� повторно разрешить\n"
+"обработку CTRL-Y из DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "ВСТРОЕ��ЫЙ [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "ВСТРОЕ��ЫЙ CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "ВСТРОЕ��ЫЙ CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "�еизве�тна� в�троенна� команда '%s'\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Ошибка, пу�та� команда\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Стандартный ввод перенаправлен из %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Поток ошибок перенаправлен в %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Стандартный вывод добавлен в %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Стандартный вывод перенаправлен в %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Добавить %.*s и очи�тить\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Вме�то заданного выполн�ет�� %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Ошибка порождени� проце��а, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Пути пои�ка VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# �е определён путь пои�ка «vpath»."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u путей пои�ка по «vpath»\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# �е определён общий (переменна� «VPATH») путь пои�ка."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Общий (переменна� «VPATH») путь пои�ка:\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "внутренн�� ошибка: не�колько ключей --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "внутренн�� ошибка: не�колько ключей --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "закончила�ь виртуальна� пам�ть"
+
+#~ msgid "write error"
+#~ msgstr "ошибка запи�и"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "ВСТРОЕ��ЫЙ RM %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  �еверное значение члена «update_status»!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "неизве�тный режим тра��ировки «%s»"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Ошибка 0x%x (игнорирована)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "Примен�ет�� �по�об из %s:%lu дл� обновлени� цели `%s'.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "Выполн�ет�� в�троенный �по�об дл� обновлени� цели `%s'.\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # буферов strcache: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# �о�то�ние хеш-таблицы strcache:\n"
+#~ "# "
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() не �могла запу�тить проце�� (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sЭто �вободна� программа; подробно�ти об у�лови�х ра�про�транени� "
+#~ "�мотрите\n"
+#~ "%sв и�ходном коде.  Мы �Е предо�тавл�ем гарантий; даже гарантий\n"
+#~ "%sКОММЕРЧЕСКОЙ ЦЕ��ОСТИ или ПРИГОД�ОСТИ ДЛЯ К�КОЙ-ЛИБО ЦЕЛИ.\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "излишний `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "пу�та� директива `override'"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "неправильна� директива `override'"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-предупреждение, по�ле CTRL-Y о�танут�� �уб-проце��ы.\n"
diff --git a/po/stamp-po b/po/stamp-po
new file mode 100644
index 0000000..9788f70
--- /dev/null
+++ b/po/stamp-po
@@ -0,0 +1 @@
+timestamp
diff --git a/po/sv.gmo b/po/sv.gmo
new file mode 100644
index 0000000..4f9b305
--- /dev/null
+++ b/po/sv.gmo
diff --git a/po/sv.po b/po/sv.po
new file mode 100644
index 0000000..4545ab3
--- /dev/null
+++ b/po/sv.po
@@ -0,0 +1,2251 @@
+# Swedish messages translation of make
+# Copyright © 2002, 2007, 2011, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Tomas Gradin <tg@df.lth.se>, 1996-2002.
+# Christer Andersson <klamm@comhem.se>, 2007.
+# Göran Uddeborg <goeran@uddeborg.se>, 2011, 2013.
+#
+# $Id: make.po,v 1.14 2013-10-09 21:33:42+02 göran Exp $
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-09 21:33+0200\n"
+"Last-Translator: Göran Uddeborg <goeran@uddeborg.se>\n"
+"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
+"Language: sv\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "försök att använda en funktion som inte stöds: �%s�"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "att nudda en arkivmedlem är inte tillgängligt i VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "nudda: Arkivet �%s� finns inte"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "nudda: �%s� är inte något giltigt arkiv"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "nudda: medlemmen �%s� finns inte i �%s�"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "nudda: Felaktig returkod från ar_member_touch på �%s�"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"lbr$set_module() misslyckades med att extrahera modulinformation, status = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() misslyckades och gav status = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "kan inte öppna biblioteket �%s� för att slå upp medlemmen �%s�"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Medlem �%s�%s: %ld byte vid %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (namnet kan vara avkortat)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Datum %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, flaggor = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Receptet har för många rader (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Avbrott.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Arkivmedlemmen �%s� kan vara felaktig; ej borttagen"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Arkivmedlemmen �%s� kan vara felaktig; ej borttagen"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Tar bort filen �%s�"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Tar bort filen �%s�"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  recept att utföra"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (inbyggd):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (från �%s�, rad %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Kataloger\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: kunde inte ta status.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (nyckel %s, mtid %d): kunde inte öppnas.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (enhet %d, inod [%d,%d,%d]): kunde inte öppnas.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (enhet %ld, inod %ld): kunde inte öppnas.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (nyckel %s, mtid %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (enhet %d, inod [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (enhet %ld, inod %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Inga"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " filer, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "inga"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " omöjligheter"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " hittills."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " omöjligheter i %lu kataloger.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Den rekursiva variabeln �%s� hänvisar till sig själv (så småningom)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "oavslutad variabelreferens"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Recept angavs för filen �%s� på %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Recept för filen �%s� hittades genom sökning efter implicit regel,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "men �%s� anses nu vara samma fil som �%s�."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Kommer att bortse från recept för �%s� till förmån för det som gäller �%s�."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "kan inte ändra namn från enkelkolon �%s� till dubbelkolon �%s�"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "kan inte ändra namn från dubbelkolon �%s� till enkelkolon �%s�"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Tar bort mellanfilen �%s�"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Tar bort mellanfiler …\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Nuvarande tid"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Tidsvärde utanför gränser; ersätter med %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Inte ett mål:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Värdefull fil (nödvändig för .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Låtsasmål (nödvändig för .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Kommandoradsmål."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+"#  En standardmakefil, eller enligt MAKEFILES, eller en -include/sinclude-"
+"makefil."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Inbyggd regel"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Implicit regelsökning har genomförts."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Implicit regelsökning har inte genomförts."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Implicit/statisk mönsterstam: �%s�\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Filen är ett övergående beroende."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Skapar också:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Ändringstiden har inte kontrollerats."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Filen finns inte."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Filen är mycket gammal."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Senast ändrad %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Filen har uppdaterats."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Filen har inte uppdaterats."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Recept körs just nu (DETTA ÄR ETT FEL)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Beroenderecept körs (DETTA ÄR ETT FEL)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Uppdateringen lyckades."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Behöver uppdateras (-q har angivits)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Uppdateringen misslyckades."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Ogiltigt värde i medlemmen �command_state�!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Filer"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# statistik för filhashtabell:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Fältet �%s� cachas inte: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "icke-numeriskt första argument till funktionen �word�"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "det första argumentet till funktionen �word� måste vara större än 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "icke-numeriskt första argument till funktionen �wordlist�"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "icke-numeriskt andra argument till funktionen �wordlist�"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) misslyckades (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Fel) misslyckades (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() misslyckades (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() misslyckades\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Städar bort tillfällig satsfil %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "öppna: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "skriv: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Felaktig filåtgärd: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "otillräckligt antal argument (%d) till funktionen �%s�"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "ej implementerat på denna plattform: funktionen �%s�"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "oavslutat funktionsanrop �%s�: �%c� saknas"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Tomt funktionsnamn\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Felaktigt funktionsnamn: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Funktionsnamnet är för långt: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "Felaktigt minsta antal argument (%d) till funktionen �%s�\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "Felaktigt största antal argument (%d) till funktionen �%s�\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: flaggan �%s� är tvetydig\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: flaggan �--%s� tar inget argument\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: flaggan �%c%s� tar inget argument\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: flaggan �%s� kräver ett argument\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: okänd flagga �--%s�\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: okänd flagga �%c%s�\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: otillåten flagga -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: ogiltig flagga -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: flaggan kräver ett argument -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: flaggan �-W %s� är tvetydig\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: flaggan �-W %s� tar inget argument\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: Expanderar �%s�\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: Evaluerar �%s�\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "kan inte allokera %lu byte för hashtabell: minnet slut"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Fyllnadsgrad=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Omhash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Kollisioner=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Letar efter en implicit regel för �%s�.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Letar efter en implicit regel för arkivmedlemmen �%s�.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Undviker rekursion orsakad av implicit regel.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Stammen är för lång: �%.*s�.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Prövar mönsterregel med stammen �%.*s�.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Avvisar den omöjliga regelförutsättningen �%s�.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Avvisar den omöjliga implicita förutsättningen �%s�.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Prövar det regelförutsättningen �%s�.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Prövar den implicita förutsättningen �%s�.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Hittade förutsättningen �%s� som VPATH �%s�\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Letar efter en regel med mellanfilen �%s�.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Kan inte skapa en temporärfil\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (minnesdump)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ignoreras)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<inbyggd>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: receptet för målet �%s� misslyckades"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Fel %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Fel 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s]: %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Inväntar oavslutade jobb..."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Levande barnprocess %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (fjärr)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Inhöstar misslyckad barnprocess: %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Inhöstar lyckad barnprocess: %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Städar bort tillfällig satsfil %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Bortstädning av tillfällig satsfil %s misslyckades (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Tar bort barnprocessen %p PID %s%s från kedjan.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "släpp jobbserversemafor: (Fel %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Frigjorde symbol för barnprocessen %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "skriver till jobbserver"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() misslyckades med processtart (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Räknade till %d argument vid misslyckad start\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "För upp barnprocessen %p (%s) PID %s%s på kedjan.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "väntan på semafor eller barnprocess: (Fel %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Erhöll symbol för barnprocessen %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "läser från jobbledning"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: målet �%s� finns inte"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: uppdatera målet �%s� på grund av: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "kan inte upprätthålla lastbegränsningar i detta operativsystem"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "kan inte upprätthålla lastbegränsning: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "inga fler filhandtag: kunde inte duplicera standard in\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "inga fler filhandtag: kunde inte duplicera standard ut\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "inga fler filhandtag: kunde inte duplicera standard fel\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Kunde inte återställa standard in\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Kunde inte återställa standard ut\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Kunde inte återställa standard fel\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make inhöstade barn-pid %s, inväntar fortfarande pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Kommandot hittades inte"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Skalprogrammet hittades inte"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: miljöutrymmet kanske är slut"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL ändrades (var �%s�, är nu �%s�)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Skapar tillfällig satsfil %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Satsfilinnehåll:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Satsfilinnehåll:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (rad %d) Felaktigt skalsammanhang (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[TYP] (--output-sync[=TYP]) är inte konfigurerat för detta bygge."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Misslyckades att öppna den globala symboltabellen: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Laddat objekt %s är inte deklarerat att vara GPL-kompatibelt"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Misslyckades att ladda symbolen %s från %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Tomt symbolnamn för laddning: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Laddar symbol %s från %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Operationen �load� stödjs inte på denna plattform."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Flaggor:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ignoreras av kompatibilitetsskäl.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Bygg ovillkorligen alla mål.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C KATALOG, --directory=KATALOG\n"
+"                              Byt katalog till KATALOG innan något görs.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+"  -d                          Skriv ut massor av felsökningsinformation.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=FLAGGOR]           Skriv ut olika sorters "
+"felsökningsinformation.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Miljövariabler åsidosätter makefiler.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr "  --eval=STRÄNG               Evaluera STRÄNG som en makefile-sats.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FIL, --file=FIL, --makefile=FIL\n"
+"                              Använd FIL som makefil.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Skriv ut detta meddelande och avsluta.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Ignorera fel från recept.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I KATALOG, --include-dir=KATALOG\n"
+"                              Genomsök KATALOG efter inkluderade makefiler.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Tillåt N samtidiga jobb; oändligt många om "
+"inget antal anges.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Fortsätt även om vissa mål inte kan skapas.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Påbörja fler jobb endast om lasten understiger "
+"N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Använd den senaste av mtiderna för symboliska "
+"länkar eller mål.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Kör inte något recept, skriv bara ut dem.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FIL, --old-file=FIL, --assume-old=FIL\n"
+"                              Betrakta FIL som mycket gammal och återskapa "
+"den inte.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[TYP], --output-sync[=TYP]\n"
+"                              Synkronisera utmatningen av parallella jobb\n"
+"                              enligt TYP.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Skriv ut makes interna databas.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Kör inga recept; slutstatus visar om det är "
+"aktuellt.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Inaktivera de inbyggda implicita reglerna.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Inaktivera de inbyggda "
+"variabelinställningarna.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Ã…terge inte recept.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Stäng av -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Nydatera mål i stället för att återskapa dem.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Skriv spårningsinformation.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+"  -v, --version               Skriv ut makes versionsnummer och avsluta.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Skriv ut aktuell katalog.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Stäng av -w, även om det är implicit "
+"påslaget.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FIL, --what-if=FIL, --new-file=FIL, --assume-new=FIL\n"
+"                              Betrakta FIL som hur ny som helst.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Varna vid användning av en odefinierad "
+"variabel.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "en tom sträng är ett ogiltigt filnamn"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "okänd felsökningsnivå �%s� angiven"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "okänd typ av utmatningssynkronisering �%s�"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Avbrott/Undantag fångat (kod = 0x%lx, adress = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Ett ohanterat undantagsfilter anropades från programmet %s\n"
+"Undantagskod = %lx\n"
+"Undantagsflaggor = %lx\n"
+"Undantagsadress = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Åtkomstförseelse: skrivinstruktion på adressen 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Åtkomstförseelse: läsinstruktion på adressen 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() ger default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "sökvägen för find_and_set_shell() gav default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s suspenderas i 30 sekunder..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "färdig med sleep(30). Fortsätter.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr "Internt fel: kan inte öppna jobbserversemaforen �%s�: (Fel %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Jobbserverklient (semafor %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "internt fel: ogiltig sträng �--jobserver-fds� �%s�"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Jobbserverklient (fb %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "varning: -jN framtvingat i del-make: inaktiverar jobbserverläge."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "duplicerar jobbserver"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"varning: jobbserver otillgänglig: använder -j1. Lägg till �+� i "
+"föräldraregeln."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefil från standard in angavs dubbelt."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (temporärfil)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (temporärfil)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Parallella jobb (-j) stöds inte på denna plattform."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Återställer till enkeljobbsläge (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Jobbserfacj begränsat till %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "skapar jobbserversemafor: (Fel %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "skapar jobbledning"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "iordningställer ledning till jobbserver"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Symboliska länkar stöds inte: inaktiverar -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Uppdaterar makefiler...\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefilen �%s� kan loopa; återskapas inte.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Misslyckades med att återskapa makefilen �%s�."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Den inkluderade makefilen �%s� fanns inte."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Makefilen �%s� fanns inte"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Kunde inte återgå till ursprungskatalogen."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Utför på nytt[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "avlänka (temporärfil): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL innehåller fler än ett mål"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Inga mål angavs och ingen makefil hittades"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Inga mål"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Uppdaterar slutmål...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"varning:  Klockförskjutning upptäckt.  Bygget kan ha blivit ofullständigt."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Användning: %s [flaggor] [mål] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Detta program byggdes för %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Detta program byggdes för %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Anmäl fel till <bug-make@gnu.org>.\n"
+"Skicka synpunkter på översättningen till <sv@li.org>.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "flaggan �%s%s� kräver ett strängargument som inte är tomt"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "flaggan �-%c� kräver ett positivt heltal som argument"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sByggt för %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sByggt för %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sLicens GPLv3+: GNU GPL version 3 eller senare <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sDetta är fri programvara. du får lov att ändra och vidaredistribuera den.\n"
+"%sDet finns INGEN GARANTI, så långt lagen tillåter.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make-databas, utskriven %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Färdigställde Make-databas %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Okänt fel %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: användare %lu (verklig %lu), grupp %lu (verklig %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Ã…tkomst inledd"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Användaråtkomst"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make-Ã¥tkomst"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Barnåtkomst"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Går till en okänd katalog\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: Lämnar en okänd katalog\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Går till katalogen �%s�\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Lämnar katalogen �%s�\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Går till en okänd katalog\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Lämnar en okänd katalog\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Går till katalogen �%s�\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Lämnar katalogen �%s�\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "skrivfel: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Stannar.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Läser makefiler...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Läser makefilen �%s�"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (inget standardmål)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (sökväg)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (oviktigt)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (ingen ~-expansion)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Hoppar över UTF-8-BOM i makefilen �%s�\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Hoppar över UTF-8-BOM i makefile-buffert\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "ogiltig syntax i villkorssats"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: misslyckades att ladda"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "recept inleds före första målet"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "regel saknas före recept"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (var avsikten TAB i stället för 8 mellanslag?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "separator saknas%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "målmönster saknas"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "flera målmönster"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "målmönstret innehåller inget �%%�"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "�endif� saknas"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "tomt variabelnamn"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "överflödig text efter direktivet �define�"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "�endef� saknas, oavslutad �define�"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "överflödig text efter direktivet �endef�"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "överflödig text efter direktivet �%s�"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "överflödigt �%s�"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "endast ett �else� per villkor"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Felformad målberoende variabeldefinition"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "beroenden kan inte definieras i recept"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "blandade implicita regler och statiska mönsterregler"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "blandade implicita regler och normala regler"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "målet �%s� motsvarar inte målmönstret"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "målfilen �%s� har både poster med : och ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "målet �%s� anges flera gånger i samma regel"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "varning: åsidosätter recept för målet �%s�"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "varning: ignorerar gammalt recept för målet �%s�"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "blandade implicita regler och normala regler"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "varning: NUL-tecken upptäckt, bortser från resten av raden"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Inget behöver göras för �%s�."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "�%s� är aktuell."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Beskär filen �%s�.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sIngen regel för att skapa målet �%s�, som behövs av �%s�%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sIngen regel för att skapa målet �%s�%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Överväger målfilen �%s�.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Misslyckades nyligen med att uppdatera filen �%s�.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Filen �%s� har redan övervägts.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Uppdaterar fortfarande filen �%s�.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Slutförde uppdaterandet av filen �%s�.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Filen �%s� finns inte.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Varning: .LOW_RESOLUTION_TIME-filen �%s� har en högupplöst tidsstämpel"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Hittade en implicit regel för �%s�.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Hittade ingen implicit regel för �%s�.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Använder standardrecept för �%s�.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Det cirkulära beroendet %s <- %s släpptes."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Avslutade förutsättningarna för målfilen �%s�.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Förutsättningarna för �%s� skapas.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Ger upp med målfilen �%s�.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Målet �%s� återskapades inte på grund av fel."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Förutsättningen �%s� för målet �%s� är endast ordning.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Förutsättningen �%s� för målet �%s� finns inte.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Förutsättningen �%s� är nyare än målet �%s�.\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Förutsättningen �%s� är äldre än målet �%s�.\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Målet �%s� är dubbelkolon och har inga förutsättningar.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "Inget recept för �%s� och inga förutsättningar har förändrats.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Skapar �%s� på grund av flaggan always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Inget behov att återskapa målet �%s�"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; använder VPATH-namnet �%s�"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Måste återskapa målet �%s�.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Bortser från VPATH-namnet �%s�.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "Receptet för �%s� körs.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Misslyckades med att återskapa målfilen �%s�.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Återskapade målfilen �%s�.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Målfilen �%s� behöver återskapas med -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Använder standardkommandon för �%s�.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Varning: Filen �%s� har ett ändringstid i framtiden"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Varning: Filen �%s� har en ändringstid %s s i framtiden"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS-elementet �%s� är inte ett mönster"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Customs kommer inte att exportera %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Implicita regler"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Inga implicita regler."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u implicita regler, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " slutregler."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "FEL: num_pattern_rules är felaktigt!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "okänd signal"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Avringd"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Avbrott"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Avslutad"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Otillåten instruktion"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Spårningsfälla"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Avbruten"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IO-fälla"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Emulatorfälla"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Flyttalsundantag"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Dödad"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Bussfel"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Segmenteringsfel"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Felaktigt systemanrop"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Ledningsbrott"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarmklocka"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Avslutad"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Användarsignal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Användarsignal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Barn avslutades"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Strömavbrott"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Stoppades"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Stoppades (tty-läsning)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Stoppades (tty-utskrift)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Stoppades (signal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU-tidsgräns överskreds"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Filstorleksgräns överskreds"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Virtuellt tidur löpte ut"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Profileringstidur löpte ut"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Fönster ändrat"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Fortsatte"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Brådskande I/O-läge"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O-tillfälle"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Miste resurs"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Farosignal"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Informationsbegäran"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Flyttalsprocessor inte tillgänglig"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Inga strcache-buffertar\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s strcache-buffertar: totalt = %lu (%lu) / strängar = %lu / lagring = %lu "
+"B / snitt = %lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s aktuell buf: storlek = %hu B / använt = %hu B / antal = %hu / snitt = %hu "
+"B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s annat använt: totalt = %lu B / antal = %lu / snitt = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s annat ledigt: totalt = %lu B / max = %lu B / min = %lu B / snitt = %hu B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s strcache-prestanda: uppslagningar = %lu / träffsäkerhet = %lu %%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# statistik för hashtabell:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "automatisk"
+
+#: variable.c:1602
+msgid "default"
+msgstr "normal"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "miljö"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefil"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "miljö enligt -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "kommandorad"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "�override�-direktiv"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (från �%s�, rad %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# statistik för variabelmängd-hashtabell:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Variabler\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Mönsterspecifika variabelvärden"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Inga mönsterspecifika variabelvärden."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u mönsterspecifika variabelvärden"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "varning: odefinierad variabel �%.*s�"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() misslyckades med %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Varning: Tom omdirigering\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "internt fel: �%s� command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-varning, CTRL-Y-hantering kanske behöver återställas från DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "INBYGGT [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "INBYGGT CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "INBYGGT CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Okänt inbyggt kommando \"%s\"\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Fel, tomt kommando\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Inkanal omdirigerad till %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Felkanal omdirigerad till %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Lägg till utdata till %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Utkanal omdirigerad till %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Lägg till %.*s och rensa upp\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Utför %s i stället\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Fel vid avknoppning, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH-sökvägar\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Inga �vpath�-sökvägar."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u �vpath�-sökvägar.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Ingen allmän sökväg (enligt �VPATH�-variabeln)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Allmän sökväg (enligt �VPATH�-variabeln):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "internt fel: flera flaggor �--sync-mutex�"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "internt fel: flera \"--jobserver-fds\"-flaggor"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "virtuellt minne uttömt"
+
+#~ msgid "write error"
+#~ msgstr "skrivfel"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "INBYGGT RM %s\n"
diff --git a/po/tr.gmo b/po/tr.gmo
new file mode 100644
index 0000000..6a3ede8
--- /dev/null
+++ b/po/tr.gmo
diff --git a/po/tr.po b/po/tr.po
new file mode 100644
index 0000000..79aa807
--- /dev/null
+++ b/po/tr.po
@@ -0,0 +1,2396 @@
+# Turkish translations for GNU Make messages.
+# Copyright (C) 2006 Free Software Foundation, Inc.
+# Nilgün Belma Bugüner <nilgun@buguner.name.tr>, 2001, ..., 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.81\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2006-04-23 08:45+0300\n"
+"Last-Translator: Nilgün Belma Bugüner <nilgun@buguner.name.tr>\n"
+"Language-Team: Turkish <gnu-tr-u12a@lists.sourceforge.net>\n"
+"Language: tr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.9.1\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "desteklenmeyen özelliği kullanmaya çalışıyor: `%s'"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "VMS'de işe yaramayan arşiv üyesine dokunup geçiyor"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "Dokunulup geçildi: Arşiv `%s' yok"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "Dokunulup geçildi: `%s' geçerli bir arşiv değil"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "Dokunulup geçildi: Üye `%s', `%s' içinde yok"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "Dokunulup geçildi: `%s' deki ar_member_touch'dan dönen kod hatalı"
+
+#: arscan.c:124
+#, fuzzy, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module modül bilgisini çıkarırken başarısız oldu, durum = %d"
+
+#: arscan.c:230
+#, fuzzy, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control durum =%d ile başarısız oldu"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "`%s' kaynakçası `%s' üyesine bakmak için açılamadı"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Ãœye `%s'%s: %ld bayt  %ld 'de (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr "(isim kırpılmış olmalı)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Tarih %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  Kull-kim = %d, Grup-kim = %d, kip = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Bırakıldı.\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Arşiv üyesi `%s' sahte olabilir; silinmedi"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Arşiv üyesi `%s' sahte olabilir; silinmedi"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] `%s' dosyası siliniyor"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** `%s' dosyası siliniyor"
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  çalıştırma komutları"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (paket içinde):"
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (`%s'den, satır %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Dizin\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: durumlanamadı.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (anahtar (key) %s, değişiklik tarihi (mtime) %d): açılamadı.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (aygıt %d, i-düğüm [%d,%d,%d]): açılamadı.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (aygıt %ld, i-düğüm %ld): açılamadı.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (anahtar (key) %s, deÄŸiÅŸiklik tarihi (mtime) %d):"
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (aygıt %d, i-düğüm [%d,%d,%d]):"
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (aygıt %ld, i-düğüm %ld):"
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Hayır"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " dosyaları,"
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "hayır"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr "olanaksızlıklar"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " çok uzak."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " %lu dizinde olanaksızlıklar.\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Çevrimsel değişken `%s' tekrar kendine bağıntılı (sonuçta)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "sonlandırılmamış değişken bağıntısı"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "`%s' dosyası için komutlar %s:%lu de belirtildi,"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "`%s' dosyası için komutlar örtük kural aramasında bulundu,"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "fakat `%s' şimdi `%s' dosyası ile aynı dosya olarak düşünülmeli."
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "`%s' dosyası için komutlar `%s' lehine yoksayılmış olacak."
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "tek-sütun `%s', çift-sütun `%s' olarak yeniden adlandırılamaz"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "çift-sütun `%s', tek-sütun `%s' olarak yeniden adlandırılamaz"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Aracı dosya `%s' siliniyor"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Aracı dosyalar siliniyor...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Åžu an"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Tarih damgası kapsamdışı; yerine %s kullanılıyor"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Bir hedef deÄŸil:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Kıymetli dosya (.PRECIOUS  önceden gerekliliği)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  Sahte hedef (.PHONY önceden gerekliliği)."
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  Komut-satırı hedefi."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Bir öntanımlı,MAKEFILES veya -include/sinclude makefile."
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# Örtük kural yok."
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Örtük kural araştırması yapılmıştı."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Örtük kural araştırması yapılmamıştı."
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Örtük/değişmeyen kalıp kökü: `%s'\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr ""
+"#  Orta seviyede önceden gerekli bir dosya (öncelikle gerekli dosyalara "
+"aracılık eden dosya)"
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  OluÅŸtursa da:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Değişiklik zamanı hiç kontrol edilmedi."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Dosya yok."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Dosya çok eski."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Son deÄŸiÅŸiklik tarihi %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Dosya güncelleştirilmişti."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Dosya güncelleştirilmemişti."
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Komutlar şu an işlemlerini sürdürüyor (BU BİR YAZILIM HATASI)."
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+"#  Bağımlılıkların komutları işlemlerini sürdürüyor (BU BİR YAZILIM HATASI)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#   Tamamen güncellendi."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#   Güncellenmiş olması gerekir (-q verildi)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Güncellenmiş olamadı."
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  `command_state' üyesinde geçersiz değer!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Dosyalar"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# dosyaların hash tablosu durumları:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "`word' işlevinde sayısal olmayan ilk argüman"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "`word' işlevinin ilk argümanı sıfırdan büyük olmalı"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "`wordlist' işlevinde sayısal olmayan ilk argüman"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "`wordlist' işlevinde sayısal olmayan ikinci argüman"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(In) başarısız (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "create_child_process: DuplicateHandle(Err) başarısız (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() başarısız (e=%ld)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe (): process_init_fd() başarısız\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Geçici komut-listesi (batch) dosyası %s temizleniyor\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "yazma hatası: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "argüman sayısı (%d) `%s' işlevinde yetersiz"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "bu platformda gerçekleştirilmemiş: işlev `%s'"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "`%s' işlemine çağrı sonlandırılmamış: `%c' kayıp"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "argüman sayısı (%d) `%s' işlevinde yetersiz"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "argüman sayısı (%d) `%s' işlevinde yetersiz"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: `%s' seçeneği belirsiz\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: `--%s' seçeneği argümansız kullanılır\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: seçenek `%c%s' argümansız kullanılır\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: `%s' seçeneği bir argümanla kullanılır\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: `--%s' seçeneği bilinmiyor\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: `%c%s' seçeneği bilinmiyor\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: kuraldışı seçenek -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: geçersiz seçenek -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: seçenek bir argümanla kullanılır -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: `-W %s' seçeneği belirsiz\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: `-W %s' seçeneği argümansız kullanılır\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, fuzzy, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "hash tablosu için %ld bayt ayrılamıyor: bellek tükendi"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Yük=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Rehash=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Çakışmalar=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "`%s' için bir örtük kural arıyor.\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "`%s' için arşiv-üyesi örtük kural arıyor.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Örtük kural çevrimi görmezden geliniyor.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "`%.*s' köküyle kalıp kuralı deneniyor.\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Kural önceden gerekliliği `%s' olanaksız olduğundan reddediliyor.\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Örtük önceden gereklilik `%s' olanaksız olduğundan reddediliyor.\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Kural önceden gerekliliği `%s' deneniyor.\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Örtük önceden gereklilik `%s' deneniyor.\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Önceden gereklilik `%s' VPATH `%s' olarak bulundu.\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Aracı dosya `%s' ile bir kural arıyor.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Bir geçici dosya oluşturulamıyor\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (bellek kopyası - core dosyası - diske yazıldı)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] Hata %d (yoksayıldı)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (paket içinde):"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] Hata %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] Hata 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Bitmemiş işler için bekliyor...."
+
+#: job.c:651
+#, fuzzy, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Ast dosya işini sürdürüyor: 0x%08lx (%s) PID %ld %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (karşıdan)"
+
+#: job.c:841
+#, fuzzy, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Kaybeden ast dosya sağlanıyor: 0x%08lx PID %ld %s\n"
+
+#: job.c:842
+#, fuzzy, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Kazanan ast dosya sağlanıyor: 0x%08lx PID %ld %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Geçici komut-listesi dosyası %s temizleniyor\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "Geçici komut-listesi dosyası %s temizleniyor\n"
+
+#: job.c:961
+#, fuzzy, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Ast 0x%08lx PID %ld%s zincirden kaldırılıyor\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, fuzzy, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Ast 0x%08lx (%s) için simge (token) kullanıma sunuldu.\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "iş-sunucusu yazıyor"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "Süreci başlatacak process_easy() başarısız oldu (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Sayılan %d argüman ile başarısız oldu\n"
+
+#: job.c:1735
+#, fuzzy, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Ast 0x%08lx (%s) PID %ld%s zincire konuluyor.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, fuzzy, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Ast 0x%08lx (%s) için simge (token) sağlandı.\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "görev listesi okunuyor"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "Dokunulup geçildi: Arşiv `%s' yok"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+"%sHedef `%s' i derlemek için  hiçbir kural yok, `%s' tarafından gereksinim "
+"duyuluyor%s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "işletim sisteminde yük sınırlarına ulaşılamadı "
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "ulaşılamayan yük sınırı: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "başka dosya tutucu yok: standart girdi kopyalanamadı\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "başka dosya tutucu yok: standart çıktı kopyalanamadı\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "başka dosya tutucu yok: standart girdi kopyalanamadı\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Standart girdi eski haline getirilemedi\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Standart çıktı eski haline getirilemedi\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "Standart girdi eski haline getirilemedi\n"
+
+#: job.c:2420
+#, fuzzy, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make %ld pid'li ast süreci kaldırdı ama hala pid %ld için bekliyor\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Komut bulunamadı"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Kabuk uygulaması bulunamadı"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: ortam alanı tükenmiş olabilir"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL deÄŸiÅŸti (`%s' idi, ÅŸimdi `%s')\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "%s geçici komut-liste dosyasını oluşturuyor\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (satır %d) kabuk bağlamı hatalı (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "Bu platformda paralel iÅŸler (-j) desteklenmiyor."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Seçenekler:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Uyumluluk için yoksayıldı.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+"  -B, --always-make           Tüm hedefler koşulsuz olarak oluşturulur.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr "  -C DİZİN, --directory=DIZIN Birşey yapmadan önce DİZİNe geçilir.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -b, -m                      Bir sürü hata ayıklama bilgisi basar.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=SEÇENEKLER]        Çeşitli türde hata ayıklama bilgileri basar.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides Ortam değişkenleri makefile'ları değiştirir.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f DOSYA, --file=DOSYA, --makefile=DOSYA\n"
+"                              DOSYAyı bir makefile olarak okur.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Bu iletiyi basar ve çıkar.\n"
+
+#: main.c:335
+#, fuzzy
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         Komutların ürettiği hataları yoksayar.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DÄ°ZÄ°N, --include-dir=DÄ°ZÄ°N\n"
+"                              Eklenecek makefile'ları DİZİNde arar.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Bir defada N işe izin verir; argumansız iş\n"
+"                              sayısı sınırsızdır.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Bazı hedefler yapılmadığında devam eder.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Yük N'den az olmadıkça çoklu işler "
+"başlatılmaz.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   sembolik bağlarla hedef arasında en son mtime\n"
+"                              kullanılır\n"
+
+#: main.c:349
+#, fuzzy
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Gerçekte komutlar çalıştırılmaz, gösterilir.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o DOSYA, --old-file=DOSYA, --assume-old=DOSYA\n"
+"                              DOSYAnın çok eski olduğu varsayılır ve\n"
+"                              yeniden işlem yapılmaz.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       make'in içsel veritabanını basar.\n"
+
+#: main.c:360
+#, fuzzy
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Komut çalıştırmaz; güncelse çıkışta belirtir\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+"  -r, --no-builtin-rules      Oluşumiçi örtük kuralları etkisizleştirir.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+"  -R, --no-builtin-variables  Oluşumiçi değişken ayarlarını etkisizleştirir\n"
+
+#: main.c:366
+#, fuzzy
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet     Komutlar işlenirken gösterilmez.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop Bazı hedefler yapılmadığında devam etmez.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Yeniden derlemek yerine hedeflere bakıp "
+"geçer.\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  -b, -m                      Bir sürü hata ayıklama bilgisi basar.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               make sürüm numarasını basar ve çıkar.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Kullanılan dizini basar.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Dolaylı olarak açılmış olsa bile -w 'yi "
+"kapatır\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W DOSYA, --what-if=DOSYA, --new-file=DOSYA, --assume-new=DOSYA\n"
+"                              DOSYA sonsuz yeni varsayılır.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Atanmamış bir değişkene bağıntı yapıldığında\n"
+"                              uyarır.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "dosyaismi olarak boş dizge geçersiz"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "Hata ayıklama düzeyi özelliği `%s' bilinmiyor"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, fuzzy, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Kesinti/Olağandışı durum saptandı (kod = 0x%lx, adres = 0x%lx)\n"
+
+#: main.c:835
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"program %s tarafından elde edilmemiş olağandışı-durum süzgeci çağrıldı\n"
+"OlağandışılıkKodu = %lx\n"
+"OlağandışılıkBayrakları = %lx\n"
+"OlağandışılıkAdresi = %lx\n"
+
+#: main.c:843
+#, fuzzy, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "EriÅŸim uyumsuzluÄŸu: %lx adresinde yazma iÅŸlemi\n"
+
+#: main.c:844
+#, fuzzy, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "EriÅŸim uyumsuzluÄŸu: %lx adresinde okuma iÅŸlemi\n"
+
+#: main.c:920 main.c:935
+#, fuzzy, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell default_shell = %s olarak belirliyor\n"
+
+#: main.c:988
+#, fuzzy, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"find_and_set_shell yol aramasını default_shell = %s olarak belirliyor\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s 30 saniyeliğine askıya alınıyor..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "sleep(30) bitti. Devam ediliyor.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "içsel hata: --jobserver-fds dizgesi `%s' geçersiz"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "uyarı: alt derlemede -jN zorlandı: iş sunucusu kipi kapatılıyor."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "çift iş sunucusu"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"uyarı: iş sunucusu kullanımdışı: -j1 kullanılıyor. Üst make kuralına `+' "
+"ekle."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile standart girdiden iki kez belirtildi."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (geçici dosya)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (geçici dosya)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Bu platformda paralel iÅŸler (-j) desteklenmiyor."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Tek iş kipi (-j1) için make'i başlatma konumuna alıyor"
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "işleri yaratıyor"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "işleri hazırlıyor"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Sembolik baÄŸlar desteklenmiyor: -L iptal ediliyor"
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "makefile'ları güncelliyor...\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "`%s' make dosyası çevrime girdi; yeniden derlenemez.\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "`%s' make dosyası yeniden derlenemiyor."
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "İçerilen make dosyası `%s' bulunamadı."
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "`%s' make dosyası bulunamadı"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Geriye, özgün dizine geçilemiyor."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Yeniden çalıştırılıyor[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (geçici dosya): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL bir hedeften fazlasını içeriyor"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Hedefler belirtilmediğinden make dosyası yok"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Hedef yok"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Amaçlanan hedefler güncelleniyor...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "uyarı:  Clock skew saptandı. Derleme tamamlanamayabilir."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Kullanım: %s [seçenekler] [hedef] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Bu program %s için kurgulanmış\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Bu program %s için kurgulanmış (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Yazılım hatalarını <bug-make@gnu.org> adresine,\n"
+"çeviri hatalarını <gnu-tr@belgeler.org> adresine bildiriniz.\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "`-%c' seçeneği bir boş olmayan dizge argüman gerektirir"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "`-%c' seçeneği bir pozitif tümleyici bağımsız değişkenle kullanılır"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"%sBu program %s için derlenmiş\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"%sBu program %s için derlenmiş (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Make veri tabanı, %s üzerine basıldı"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# %s üzerindeki Make veri tabanı tamamlandı\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Bilinmeyen hata %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: kullanıcı %lu (gerçekte %lu), grup %lu (gerçekte %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Ä°lklendirilmiÅŸ eriÅŸim"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Kullanıcı erişimi"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make eriÅŸimi"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Asta eriÅŸim"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: bilinmeyen bir dizine giriliyor\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: bilinmeyen dizinden çıkılıyor\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: `%s' dizine giriliyor\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: `%s' dizininden çıkılıyor\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Bilinmeyen bir dizine giriliyor\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: Bilinmeyen dizinden çıkılıyor\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]:`%s' dizinine giriliyor\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: `%s' dizininden çıkılıyor\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "yazma hatası: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ". Durdu.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Makefile'lar okunuyor...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "`%s' make dosyası okunuyor"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (öntanımlı amaç yok)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (arama yolu)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (umurunda deÄŸil)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr "( ~ uzantısı yok)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "şartlı ifade de yazılış hatası"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "komutlar ilk hedeften önce başlıyor"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "komutlardan önceki kural kayıp"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr "(8 boşluğu TAB'mı zannettiniz?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "kayıp ayraç%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "hedef kalıp kayıp"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "çok sayıda hedef kalıp"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "hedef kalıp `%%' içermiyor"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "`endif' kayıp"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "boÅŸ deÄŸiÅŸken ismi"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "`endef' yönergesinden sonraki metin yersiz"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "`endef' kayıp, `define' sonlandırılmamış"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "`endef' yönergesinden sonraki metin yersiz"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "`%s' yönergesinden sonraki metin yersiz"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "`%s' yersiz"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "her şartlı ifade de sadece bir `else'"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Hedefe özgü değişken tanımı bozuk"
+
+#: read.c:1957
+#, fuzzy
+msgid "prerequisites cannot be defined in recipes"
+msgstr "öngereksinimler komut betiklerinde tanımlanamaz"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "örtük ve durağan kalıp kuralları karışmış"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "örtük ve normal kurallar karışmış"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "hedef `%s' hedef kalıpla eşleşmiyor"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "hedef dosya `%s'hem : hem de :: girdilerine sahip"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "hedef `%s' aynı kuralda birden fazla belirtilmiş."
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "uyarı: hedef `%s' için komutlar geçersiz kılınıyor"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "uyarı: hedef `%s' için eski komutlar yoksayılıyor"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "örtük ve normal kurallar karışmış"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "uyarı: NUL karakteri görüldü; satırın geri kalanı yoksayılıyor"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "`%s' için hiçbir şey yapılmadı."
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "`%s' güncel"
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Budanmış dosya `%s'.\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+"%sHedef `%s' i derlemek için  hiçbir kural yok, `%s' tarafından gereksinim "
+"duyuluyor%s"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sHedef `%s' i derlemek için  hiçbir kural yok%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "hedef dosya `%s' hesaba katılıyor.\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "En son `%s'dosyasının güncellenmesi denendi ve başarısız oldu.\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "`%s' dosyası zaten hesaba katıldı.\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "`%s' dosyası hala güncelleniyor.\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "`%s' dosyasının güncellenmesi tamamlandı.\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "`%s' dosyası yok.\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Uyarı: .LOW_RESOLUTION_TIME dosyası `%s' yüksek çözünürlüklü bir zaman "
+"damgası içeriyor"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "`%s' için bir örtük kural bulundu.\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "`%s' için bir örtük kural yok.\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "`%s' için öntanımlı komutlar kullanılıyor.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Çevrimsel %s <- %s bağımlılığı iptal edildi."
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "`%s' hedef dosyasının önceden gereklilikleri tamamlandı.\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "`%s' için önceden gereklilikler derlenmeye devam ediyor.\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "`%s' hedef dosyasında umut kesiliyor.\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Hedef `%s' hatalardan dolayı yeniden derlenemez."
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Önceden gerekli `%s' hedef `%s' için şart.\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Hedef `%s' in önceden gereklisi `%s' mevcut değil.\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Önceden gerekli `%s' hedef `%s' den daha yeni.\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Önceden gerekli `%s' hedef `%s' den daha eski.\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Hedef `%s' çift-sütunlu ve önceden gereklilikler gerektirmiyor.\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "`%s' için komutlar ve  önceden gerekliliklerde bir değişiklik yok.\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Daima derle seçeneğinden dolayı `%s' derleniyor.\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "Hedef `%s' nin yeniden derlenmesine gerek yok"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; VPATH ismi `%s' kullanılıyor"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Hedef `%s' yeniden derlenmeli.\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr " VPATH ismi `%s' yoksayılıyor.\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "`%s' nin komutları çalışmaya devam ediyor.\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Hedef dosya `%s' yeniden derlenirken hata oluÅŸtu.\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Hedef dosya `%s' yeniden derlenmesi başarıyla tamamlandı.\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "`%s' hedef dosyasının -q ile yeniden derlenmesi gerekir.\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "`%s' için öntanımlı komutlar kullanılıyor.\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Uyarı: `%s' dosyası gelecekteki bir değişiklik tarihini içeriyor"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Uyarı: `%s' dosyasının  değişiklik tarihi %.2g s kadar gelecekte"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS elemanı `%s' bir kalıp değil"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Özelleştirilmiş olanlar dışarı aktarılmayacak: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Örtük Kurallar"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Örtük kural yok."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u örtük kural, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " terminal."
+
+#: rule.c:530
+#, fuzzy, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "YAZILIM HATASI: num_pattern_rules yanlış!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "bilinmeyen sinyal"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Tıkanma"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Kesme"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Çık"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Yönergeler uygun değil"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "İzleme/kesmenoktası yakalayıcı"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Ä°ptal edildi"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT tuzağı"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT tuzağı"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Gerçek sayı olağandışı durumu"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Süreç durduruldu"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Veri yolu hatası"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Parçalama arızası"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Sistem çağrısı hatalı"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Veri alınamıyor"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Alarm saati"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Sonlandırıldı"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Kullanıcı tanımlı sinyal 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Kullanıcı tanımlı sinyal 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Ast bıraktı"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Güç kesilmesi"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Durduruldu"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Durduruldu (konsol girdisi)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Durduruldu (konsol çıktısı)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Durduruldu (sinyal)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU zaman sınırı aşıldı"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Dosya uzunluğu sınırı aşıldı"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Sanal süreölçer kullanım süresi doldu"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Tanıtım süreölçer kullanım süresi doldu"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Pencere boyutları değiştirildi"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Devam ediliyor"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Acil G/Ç koşulu"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "G/Ç mümkün"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Kaynak kaybı"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Tehlike sinyali"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Bilgi isteÄŸi"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Aritmetik işlemci kullanılabilir değil"
+
+#: strcache.c:236
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr "%s dizge belleği tamponlarının sayısı: %d\n"
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr "%s dizge belleÄŸi boÅŸ: toplam = %d / max = %d / min = %d / ort = %d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s dizge belleÄŸi boyu: toplam = %d / max = %d / min = %d / ort = %d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr "%s dizge belleÄŸi boÅŸ: toplam = %d / max = %d / min = %d / ort = %d\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# dosyaların hash tablosu durumları:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "otomatik"
+
+#: variable.c:1602
+msgid "default"
+msgstr "öntanımlı"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "çevre"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "derleme dosyası"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "çevre -e altında"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "komut satırı"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "`override' yönergesi"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (`%s'den, satır %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# değişken kümesi hash tablosunun durumu:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# DeÄŸiÅŸkenler\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Kalıba özgü Değişken Değerleri"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Örneğe duyarlı değişken değeri yok."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u örneğe duyarlı değişken değeri"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "uyarı: `%.*s' değişkeni atanmamış"
+
+#: vmsfunctions.c:91
+#, fuzzy, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search %d ile başarısız\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Uyarı: Boş yönlendirme\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "içsel hata: `%s' command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-uyarı, DCL den yönetimi almak için CTRL-Y'yi yeniden "
+"etkinleÅŸtirebilirsiniz.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "OLUŞUMİÇİ [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "OLUŞUMİÇİ CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "OLUŞUMİÇİ CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Oluşumiçi komut '%s' bilinmiyor\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Hata, boÅŸ komut\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "%s den yönlendirilmiş girdi\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "%s e yönlendirilmiş hata\n"
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "%s e yönlendirilmiş çıktı\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "%s e yönlendirilmiş çıktı\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "%s yerine çalıştırılıyor\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "doğum hatası, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH Arama yolu\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# `vpath' arama yolları yok"
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u `vpath' arama yolu.\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Genel arama yolu (`VPATH' çevre değişkeni) yok."
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Genel (`VPATH' çevre değişkeni) arama yolu:\n"
+"# "
+
+#~ msgid "#  Invalid value in `update_status' member!"
+#~ msgstr "#  `update_status' üyesinde geçersiz değer!"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Hata 0x%x (yoksayıldı)"
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "Süreci başlatmada process_easy() başarısız oldu (e=%ld)\n"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "içsel hata: çok sayıda --jobserver-fds seçeneği"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sBu bir serbest yazılımdır; kopyalama koşulları için kaynak koduna "
+#~ "bakınız.\n"
+#~ "%sHiçbir garantisi yoktur; hatta SATILABİLİRLİĞİ veya ŞAHSİ "
+#~ "KULLANIMINIZA\n"
+#~ "%sUYGUNLUĞU için bile garanti verilmez.\n"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "sanal bellek tükendi"
+
+#~ msgid "write error"
+#~ msgstr "yazma hatası"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "yersiz `endef'"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "boş `override' yönergesi"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "`override' yönergesi geçersiz"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s # of strings in strcache: %d\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%s dizge belleğindeki dizgelerin sayısı: %d\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-uyarı, CTRL-Y etraftaki alt-süreç(ler)i bıraktıracak.\n"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "OLUŞUMİÇİ RM %s\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "Dosyada hala yazılış hatası var: '\"'\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "SIGCHLD sinyali alındı; %u sağlanmamış ast dosya.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "sh.exe yoksa -j veya --jobs belirtilemez."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "Tek iş kipi için make'i başlatma konumuna alıyor"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "`%sinclude' için dosyaismi yok"
+
+#~ msgid "target `%s' leaves prerequisite pattern empty"
+#~ msgstr "hedef `%s' önceden gereklilik kalıbını boş bırakıyor"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# Dosyalar yok."
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# %u dosya %u hash kümesinde.\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr "# her tabloda ortalama %.3f dosya, bir tabloda en çok %u dosya.\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DÄ°ZÄ°N"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "Hiç bir şey yapmadan DİZİNe geçer"
+
+#~ msgid "FLAGS"
+#~ msgstr "BAYRAKLAR"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "Bir hata ayıklayıcı eklemeye izin vermek için süreci askıya alır"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "Çevre değişkenleri makefile'ları geçersiz kılıyor"
+
+#~ msgid "FILE"
+#~ msgstr "DOSYA"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "DOSYAyı bir makefile olarak okur"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "İçerilmiş makefile'lar için DİZİNi araştırır"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "Yük N'in altında olmadıkça işler başlatılmaz"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "Genellikle hiçbir komut çalıştırılmaz; onları basar"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "DOSYAnın çok eski olduğunu hesaba katarak yeniden derlemez."
+
+#~ msgid "Don't echo commands"
+#~ msgstr "Komutları ekolamaz"
+
+#~ msgid "Turns off -k"
+#~ msgstr "-k 'yı kapatır"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "DOSYAnın ne kadar yeni olduğundaki belirsizliği hesaba katar."
+
+#~ msgid "Entering"
+#~ msgstr "  Dizine girdi:"
+
+#~ msgid "Leaving"
+#~ msgstr "Dizini bıraktı:"
+
+#~ msgid "# No variables."
+#~ msgstr "# DeÄŸiÅŸkenker yok"
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# her tabloda %.1f değişken ortalaması, bir tabloda en çok %u\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# her tabloda %d.%d değişken ortalaması, bir tabloda en çok %u\n"
diff --git a/po/uk.gmo b/po/uk.gmo
new file mode 100644
index 0000000..bfdbf8b
--- /dev/null
+++ b/po/uk.gmo
diff --git a/po/uk.po b/po/uk.po
new file mode 100644
index 0000000..4eefbe0
--- /dev/null
+++ b/po/uk.po
@@ -0,0 +1,2276 @@
+# Переклад make україн�ькою.
+# Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+#
+# Volodymyr M. Lisivka <lvm@mystery.lviv.net>, 2001-2012.
+# Yuri Chornoivan <yurchor@ukr.net>, 2012, 2013.
+msgid ""
+msgstr ""
+"Project-Id-Version: make 4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-09 22:15+0300\n"
+"Last-Translator: Volodymyr M. Lisivka <lvm@mystery.lviv.net>\n"
+"Language-Team: Ukrainian <translation-team-uk@lists.sourceforge.net>\n"
+"Language: uk\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Lokalize 1.5\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "�проба вжити можливі�ть, �ка не підтримуєть��: \"%s\""
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "оновленн� ча�у зміни члена архіву неможливо у �и�темі VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "оновленн� ча�у зміни: �рхів \"%s\" не і�нує"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "оновленн� ча�у зміни: �евірний архів: \"%s\""
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "оновленн� ча�у зміни: Член \"%s\" не мі�тить�� у \"%s\""
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+"оновленн� ча�у зміни: Функці� ar_member_touch повернула\n"
+"поганий код відповіді дл� \"%s\""
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_module() не вдало�� видобути дані модул�, �тан = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "Помилка lbr$ini_control() з повідомленн�м �тану = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "не вдало�� відкрити бібліотеку «%s» дл� пошуку елемента «%s»"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Елемент «%s»%s: %ld байтів з %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (ім'� може бути обрізано)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Дата %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, режим = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "У рецепті забагато р�дків (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Зупинка.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Елемент архіву, «%s», можливо є фіктивним; не вилучено"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Елемент архіву, «%s», можливо є фіктивним; не вилучено"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] Вилучаємо файл \"%s\""
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** Вилучаємо файл \"%s\""
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  �по�іб, �кий �лід за�то�увати"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (вбудоване):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (з \"%s\", р�док %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Каталоги\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: неможливо отримати інформацію (stat).\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (ключ %s, ча� зміни %d): не вдало�� відкрити.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (при�трій %d, івузол [%d,%d,%d]): неможливо відкрити.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (при�трій %ld, івузол %ld): не вдало�� відкрити.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (ключ %s, ча� модифікації %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (при�трій %d, івузол [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (при�трій %ld, івузол %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "�і"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " файлів, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "ні"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " недо��жних цілей"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " на поточний момент."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " недо��жних цілей у %lu каталогах.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Рекур�ивна змінна \"%s\" по�илаєть�� �ама на �ебе (у результаті)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "незавершена по�иланн� на змінну"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Спо�іб дл� файла «%s» було задано %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+"Спо�іб дл� файла «%s» було знайдено за допомогою пошуку не�вних правил,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "але \"%s\" і \"%s\" тепер вважають�� одним і тим же ж файлом. "
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "Спо�іб дл� «%s» буде проігноровано на кори�ть �по�обу дл� «%s»."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+"неможливо перейменувати \"%s\" з однією двокрапкою у \"%s\" з двома "
+"двокрапками"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+"неможливо перейменувати \"%s\" з двома двокрапками у \"%s\" з однією "
+"двокрапкою"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** Вилучаємо проміжний файл «%s»"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Видал�ю проміжні файли...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Поточний ча�"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: ча�ова позначка поза допу�тимим діапазоном; замінюємо на %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# �е є метою:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Варті�ний файл (залежні�ть .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  П�евдоціль (залежні�ть .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  Мета, що викликаєть�� з командного р�дка."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Типово, MAKEFILES, або -include/sinclude makefile."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Вбудоване правило"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Пошук не�вних правил виконано."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Пошук не�вних правил не було виконано."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  О�нова не�вного або �татичного шаблону: \"%s\"\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Файл є проміжною залежні�тю."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Збирає також:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Ча� зміни ніколи не перевір�в��."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Файл не і�нує."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Файл дуже �тарий."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Во�таннє оновлено %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Файл був оновлений."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Файл не було оновлено."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Виконуєть�� обробка (ЦЕ ПОМИЛК�)"
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Ці залежно�ті вже обробл�ють�� (ЦЕ ПОМИЛК�)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  У�пішно оновлено."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Повинно бути оновлено (в�тановлений ключ -q)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Спроба оновленн� безу�пішна."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  �екоректне значенн� члена \"command_state\"!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Файли"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# �тати�тика щодо таблиці хешів файлів:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: поле «%s» не кешовано: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "не чи�ловий перший аргумент дл� функції \"word\""
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "першим аргументом функції «word» має бути чи�ло, більше за 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "не чи�ловий перший аргумент дл� функції \"wordlist\""
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "не чи�ловий другий аргумент дл� функції \"wordlist\""
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: помилка DuplicateHandle(In) (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: помилка DuplicateHandle(Err) (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "Помилка CreatePipe() (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): помилка process_init_fd()\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "Спорожнюємо тимча�овий пакетний файл %s\n"
+
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "open: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "write: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "�екоректна ді� над файлом: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "недо�татн� кількі�ть аргументів (%d) функції «%s»"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "не реалізовано на цій платформі: функці� «%s»"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "незавершений виклик функції \"%s\"; пропущено \"%c\""
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Порожн� назва функції\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "�екоректна назва функції: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "�азва функції є задовгою: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "�екоректна мінімальна кількі�ть аргументів (%d) функції %s\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "�екоректна мак�имальна кількі�ть аргументів (%d) функції %s\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: параметр «%s» не є однозначним\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: додаванн� аргументів до параметра «--%s» не передбачено\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: додаванн� аргументів до параметра «%c%s» не передбачено\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: до параметра «%s» �лід додати аргумент\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: невідомий параметр «--%s»\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: невідомий параметр «%c%s»\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: невірний параметр -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: невірний параметр -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: параметру необхідний аргумент -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: параметр «-W %s» не є однозначним\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: додаванн� аргументів до параметра «-W %s» не передбачено\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: розгортаємо «%s»\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: обчи�люємо «%s»\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "не вдало�� розмі�тити %lu байтів дл� таблиці хешів: вичерпано пам’�ть"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Завантаженн�=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Повторне хешуванн�=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Збіги=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Пошук не�вного правила дл� \"%s\".\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Пошук не�вного правила дл� члена архіву \"%s\".\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Запобіганн� рекур�ивного виклику не�вного правила.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Занадто довгий шаблон: «%.*s».\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Спроба за�то�уванн� правила зі зразком, о�нова \"%.*s\".\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Відкиданн� неможливої залежно�ті правила «%s».\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Відкиданн� неможливої не�вної залежно�ті «%s».\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Пробую залежні�ть правило \"%s\".\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Пробую не�вні залежно�ті \"%s\".\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Ви�влено залежні�ть «%s» у форматі VPATH «%s»\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Пошук правила з проміжним файлом \"%s\".\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "�е вдало�� �творити тимча�овий файл\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (зроблений дамп пам'�ті)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (ігноруєть��)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<вбудований>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: �проба виконанн� рецепта дл� мети «%s» зазнала невдачі"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Помилка %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Помилка 0x%x%s"
+
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** Очікуванн� завершенн� завдань..."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "�езавершений дочірній проце� %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (віддалений)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "Підбираємо невдалий дочірній проце� з PID %p %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "Підбираємо вдалий дочірній проце� з PID %p %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "Знищенн� тимча�ового командного файла %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr ""
+"Спроба витиканн� тимча�ового файла пакетної обробки %s зазнала невдачі (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "Вилучаємо PID дочірнього проце�у %p %s%s з ланцюжка.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "�пу�каємо �емафор �ервера завдань: (Помилка %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "Звільнено �имвол дл� дочірнього проце�у %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "запи� до �ервера завдань"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() не вдало�� запу�тити проце� (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"Під ча� невдалого запу�ку кількі�ть аргументів дорівнювала %d\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "Додаємо дочірній проце� з PID %p (%s) %s%s до ланцюжка.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "очіккуванн� �емафора або дочірнього проце�у: (помилка %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "Отримано �имвол дл� дочірнього проце�у %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "читаємо запи�и з потоку завдань"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: мети «%s» не і�нує"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: оновленн� мети «%s» з такої причини: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+"ц� операційна �и�тема не дозвол�є в�тановлювати обмеженн� на завантаженн�"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "неможливо в�тановити обмеженн� на завантаженн�: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "не ви�тачає файлових де�крипторів: не вдало�� здублювати stdin\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "не ви�тачає файлових де�крипторів: не вдало�� здублювати stdout\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "не ви�тачає файлових де�крипторів: не вдало�� здублювати stderr\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "�е вдало�� відновити stdin\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "�е вдало�� відновити stdout\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "�е вдало�� відновити stderr\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+"make підібрано дочірній проце� з pid %s, �кий в�е ще чекає на завершенн� "
+"проце�у з pid %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Команда не знайдена"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Командний проце�ор не знайдений"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: ймовірно, завершило�� мі�це у �ередовищі"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL змінено (було «%s», тепер «%s»)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Створюємо тимча�овий пакетний файл %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Вмі�т файла пакетної обробки:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Вмі�т пакетного файла:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+"%s (р�док %d) Поганий контек�т оболонки (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+"-O[ТИП] (--output-sync[=ТИП]) дл� цього �еан�у збиранн� не налаштовано."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "�е вдало�� відкрити таблицю загальних �имволів: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "Завантажений об’єкт %s не оголошено �к �умі�ний з GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "�е вдало�� завантажити �имвол %s з %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Порожн� назва �имволу дл� завантаженн�: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "Завантажуємо �имвол %s з %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "�а цій платформі виконанн� дії «load» не передбачено."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Ключі:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      Ігноруєть��, дл� �умі�но�ті.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           безумовно обробл�ти в�і запи�и мети.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C К�Т�ЛОГ, --directory=К�Т�ЛОГ\n"
+"                              Перейти до каталогу до виконанн� будь-�ких "
+"дій.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          Виве�ти діагно�тичні повідомленн�.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=ПР�ПОРЦІ]          Виве�ти діагно�тичні повідомленн� вказаних "
+"типів.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Змінні �ередовища мають вищий пріоритет за "
+"змінні makefile.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr "  --eval=РЯДОК                Обробити РЯДОК �к ін�трукцію makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f Ф�ЙЛ, --file=Ф�ЙЛ, --makefile=Ф�ЙЛ\n"
+"                              Викори�тати Ф�ЙЛ �к makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Виве�ти це повідомленн� і вийти.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+"  -i, --ignore-errors         Ігнорувати помилки від �по�обів збиранн�.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I К�Т�ЛОГ, --include-dir=К�Т�ЛОГ\n"
+"                              Виконати пошук включених makefile у каталозі.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Виконувати одноча�но N завдань; �кщо не "
+"вказано — необмежену кількі�ть.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+"  -k, --keep-going            Продовжувати роботу, �кщо збиранн� �кої�ь мети "
+"неможливе.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              �е запу�кати декількох завдань, �кщо "
+"навантаженн� перевищує N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Викори�товувати новіший ча� зміни з ча�ів "
+"зміни по�иланн� і мети.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              �е за�то�овувати �по�обів збиранн�, про�то "
+"виве�ти назви �по�обів.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o Ф�ЙЛ, --old-file=Ф�ЙЛ, --assume-old=Ф�ЙЛ\n"
+"                              Вважати Ф�ЙЛ дуже �тарим і не виконувати його "
+"повторного збиранн�.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[ТИП], --output-sync[=ТИП]\n"
+"                              �инхронізувати виведені дані паралельних "
+"завдань за ТИПом.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       Виве�ти внутрішню базу даних make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              не за�то�овувати жодних "
+"�по�обів;                               код завершенн� показує, чи в�е вже "
+"зроблено.\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      Вимкнути вбудовані не�вні правила.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  Вимкнути вбудовані параметри змінних.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       �е виводити �по�оби збиранн�.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Вимкнути -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+"  -t, --touch                 Змінювати ча� до�тупу до мети замі�ть її "
+"повторного збиранн�.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Виве�ти дані щодо тра�уванн�.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Виве�ти дані щодо вер�ії make і вийти.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Виводити дані щодо поточного каталогу.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+"  --no-print-directory        Вимкнути -w, навіть �кщо вмиканн� було "
+"виконано не�вним чином.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W Ф�ЙЛ, --what-if=Ф�ЙЛ, --new-file=Ф�ЙЛ, --assume-new=Ф�ЙЛ\n"
+"                              Вважати Ф�ЙЛ завжди новим.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Попереджати про по�иланн� на невизначену "
+"змінну.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "порожній р�док не може бути назвою файла"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "невідома �пецифікаці� рівн� діагно�тики, «%s»"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "невідомий тип �инхронізації виведених даних, «%s»"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: �тало�� перериванн� або виключенн� (код = 0x%lx, адре�а = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"З програми %s викликано фільтр непридатних до обробки виключень\n"
+"Код виключенн� = %lx\n"
+"Прапорці виключенн� = %lx\n"
+"�дре�а виключенн� = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Порушенн� правил до�тупу: ді� з запи�у за адре�ою 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Порушенн� правил до�тупу: ді� з читанн� за адре�ою 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() в�тановлює default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+"Пошуком шл�хів find_and_set_shell() в�тановлено значенн� default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s призупин�єть�� на 30 �екунд..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "виконано sleep(30). Продовжуємо.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"внутрішн� помилка: не вдало�� відкрити �емафор �ервера завдань «%s»: "
+"(помилка %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Клієнт �ервера завдань (�емафор %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "внутрішн� помилка: некоректний р�док --jobserver-fds, «%s»"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Клієнт �ервера завдань (fd %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+"попередженн�: у вкладеному файлів збиранн� вказано -jN: вимикаємо режим "
+"�ервера завдань."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "дублюємо �ервер завдань"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"попередженн�: �ервер завдань недо�тупний: викори�товуємо -j1. Додайте «+» до "
+"батьків�ького правила збиранн�."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Makefile зі �тандартного джерела вхідних даних вказано двічі."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (тимча�овий файл)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (тимча�овий файл)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "�а цій платформі паралельної обробки завдань (-j) не передбачено."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "Повертаємо�� до режиму єдиного завданн� (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Слоти �ервера завдань обмежено значенн�м %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "�творюємо �емафор �ервера завдань: (помилка %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "�творюємо канал завдань"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "ініціалізуємо канал �ервера завдань"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Підтримки �имволічних по�илань не передбачено: вимикаємо -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Оновленн� make-файлів...\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Make-файл \"%s\", можливо, зациклений, він не перезбиратиметь��.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Спроба перезібрати make-файл \"%s\" безу�пішна."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Make-файл \"%s\", �кий включаєть��, не було знайдено."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Make-файл \"%s\" не було знайдено"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "�еможливо перейти у перві�ний каталог."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Повторне виконанн�[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (тимча�овий файл): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL мі�тить декілька запи�ів мети"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "�е задані цілі і не знайдений make-файл"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "�ема цілей"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "Оновленн� цілей мети...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"попередженн�: ви�влено відхиленн� показів годинника. Збиранн� може бути "
+"неповним."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Викори�танн�: %s [КЛЮЧІ]... [ЦІЛЬ]...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Цю програму зібрано дл� %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Цю програму зібрано дл� %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "Повідомлюйте про помилки до <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "разом з «%s%s» мало бути вказано непорожній р�дковий аргумент"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "ключ \"-%c\" повинен викори�товувати�� з цілим додатним аргументом"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%sЗібрано дл� %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%sЗібрано дл� %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sУмови ліцензуванн� викладено у GPLv3+: GNU GPL вер�ії 3 або новішій, "
+"<http://gnu.org/licenses/gpl.html>\n"
+"%sЦе вільне програмне забезпеченн�: ви можете вільно змінювати і поширювати "
+"його.\n"
+"%sВам не надаєть�� ЖОД�ИХ Г�Р��ТІЙ, окрім гарантій передбачених "
+"законодав�твом.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# База даних Make, надрукована %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Друк бази даних Make завершено %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "�евідома помилка %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: кори�тувач %lu (на�правді %lu), група %lu (на�правді %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Ініціалізований до�туп"
+
+#: misc.c:622
+msgid "User access"
+msgstr "До�туп кори�тувача"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "До�туп make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "До�туп дочірнього проце�у"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: входимо до невідомого каталогу\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: виходимо з невідомого каталогу\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: входимо до каталогу «%s»\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: Залишаю каталог \"%s\"\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: входимо до невідомого каталогу\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: залишаємо невідомий каталог\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: входимо до каталогу «%s»\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: Залишаю каталог \"%s\"\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "помилка запи�у: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Зупинка.\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "Читанн� make-файлів...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "Читанн� make-файла \"%s\""
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (немає типової мети)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (шл�х пошуку)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (не зважати)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (не розширювати ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "Пропу�каємо мітку UTF-8 у файлі makefile «%s»\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "Пропу�каємо мітку UTF-8 у буфері файла makefile\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "невірний �интак�и� у умовному вираженні"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: не вдало�� завантажити"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "визначенн� �по�обу збиранн� розпочинаєть�� до визначенн� першої мети"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "пропущено правило до �по�обу"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (ви хотіли вве�ти TAB замі�ть 8 пробілів?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "пропущений розділювач%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "пропущений шаблон цілі"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "не один шаблон цілі"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "шаблон цілі не мі�тить \"%%\""
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "пропущена \"endif\""
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "порожнє ім'� змінної"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "зайвий тек�т пі�л� директиви «define»"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "пропущена \"endif\", незавершена \"define\""
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "зайвий тек�т пі�л� директиви «endef»"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "зайвий тек�т пі�л� директиви \"%s\""
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "зайва \"%s\""
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "в умовному виразі можлива лише одна директива `else'"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "Помилкове форматуванн� �пецифічного дл� мети визначенн� змінної"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "у �по�обах збиранн� не можна вказувати залежно�тей"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "змішані не�вні правила і правила зі �татичними зразками"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "змішані не�вні і звичайні правила"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "ціль \"%s\" не відповідає зразку цілей"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "цільовий файл \"%s\" має входженн� і з \":\", і з \"::\" "
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "ціль \"%s\" зазначено декілька разів у одному правилі"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "попередженн�: замінюємо �по�іб дл� мети «%s»"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "попередженн�: ігноруємо за�тарілий �по�іб дл� мети «%s»"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "змішані не�вні і звичайні правила"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "попередженн�: зу�трінутий �имвол NUL; ігноруєть�� до кінц� р�дки"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Ціль \"%s\" не вимагає виконанн� команд."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "\"%s\" не вимагає оновленн�."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Обрізаємо файл «%s».\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%s�ема правила дл� �творенн� цілі \"%s\", необхідної дл� \"%s\"%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s�ема правила дл� �творенн� цілі \"%s\"%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Обробка цільового файла \"%s\".\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Попередн� �проба оновити файл \"%s\" завершила�� безу�пішно.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Файл \"%s\" вже було оброблено.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "В�е ще оновлюєть�� файл \"%s\".\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Оновленн� файла \"%s\" завершено.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "�е ви�влено файла з назвою «%s».\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Попередженн�: файл .LOW_RESOLUTION_TIME «%s» має ча�ову позначку ви�окої "
+"точно�ті"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Знайдено не�вне правило дл� \"%s\".\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "�е знайдено не�вних правил дл� \"%s\".\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Викори�товуємо типовий �по�іб дл� «%s».\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "Циклічна залежні�ть %s <- %s пропущена."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Завершено обробку попередніх залежно�тей файла мети «%s».\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "Цілі, від �ких залежить \"%s\", збирають��.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "�варійний зупинка на цільовому файлі \"%s\".\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "Ціль \"%s\" не була перезібрана через помилки."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "Залежні�ть «%s» визначено дл� мети «%s» лише пор�дком збиранн�.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "Залежно�ті «%s» мети «%s» не і�нує.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "Залежні�ть «%s» є новішою за мету «%s».\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "Залежні�ть «%s» є �тарішою за мету «%s».\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "Ціль \"%s\" оголошена з двома двокрапками і не має залежно�тей.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "�емає �по�обу збиранн� «%s», в�і попередні залежно�ті не змінено.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Збираємо «%s» через в�тановленн� ключа always-make.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Потреби у повторному збиранні мети «%s» немає"
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; викори�товуємо назву VPATH «%s»"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "�еобхідно перезібрати ціль \"%s\".\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  Ігноруємо назву VPATH «%s».\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "За�то�овуємо �по�іб «%s».\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Спроба перезібрати цільовий файл \"%s\" безу�пішна.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Цільовий файл \"%s\" у�пішно перезібраний.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Цільовий файл \"%s\" вимагає перезбиранн� з ключем -q.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Викори�танн� типових команд дл� «%s».\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Увага: Файл \"%s\" має майбутній ча� зміни"
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Увага: ча� зміни файла «%s» перебуває на %s � у майбутньому"
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Елемент .LIBPATTERNS «%s» не є зразком"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "�еек�портовні налаштуванн�: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# �е�вні правила"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# �е�вних правил нема."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# �е�вних правил: %u, термінальних: %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr "."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "ПОМИЛК�: значенн� num_pattern_rules є помилковим!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "невідомий �игнал"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Обрив"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Перериванн�"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Вихід"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "�еприпу�тима ін�трукці�"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Па�тка тра�уванн� чи точки зупинки"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Припинено"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Па�тка IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Па�тка EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Помилка операції з крапкою, що плаває"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Знищенн�"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Помилка на шині"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Збій �егментації"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Поганий �и�темний виклик"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "Обрив каналу"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "Сигнал по таймеру"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "Завершено"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Обумовлений кори�тувачем �игнал 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Обумовлений кори�тувачем �игнал 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "�ащадок завершив роботу"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Збій живленн�"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Зупинено"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Зупинено (ввід з термінала) "
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Зупинено (вивід на термінал)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Зупинено (�игнал)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Перевищене обмеженн� на проце�орний ча�"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Перевищений межа розміру файла"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Віртуальний ча� минув"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Ча� профілюванн� минув"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Вікно змінено"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "Продовжено"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "Умова ек�треного вводу/виводу"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "Можливий ввід/вивід"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Ре�ур� втрачено"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Сигнал небезпеки"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Запит інформації"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Допоміжний проце�ор дл� обчи�лень з рухомою комою недо�тупний"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s немає буферів strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"Буфери strcache %s: %lu (%lu) / р�дків = %lu / �ховище = %lu Б / �ер = %lu "
+"Б\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"Поточний буфер %s: розмір = %hu Б / викори�тано = %hu Б / кількі�ть = %hu / "
+"�ер = %hu Б\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "Інше викори�тане %s: загалом = %lu B / кількі�ть = %lu / �ер = %lu Б\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"Інше вільне %s: загалом = %lu Б / мак� = %lu Б / мін = %lu Б / �ер = %hu Б\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"Швидкоді� strcache %s: циклів пошуку = %lu / від�оток знайденого = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# �тати�тика щодо таблиці хешів:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "автоматична"
+
+#: variable.c:1602
+msgid "default"
+msgstr "типовий"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "визначена у �ередовищі"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "файл make"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "заданий ключ -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "визначена у командному р�дку"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "Директива «override»"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (з \"%s\", р�док %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# �тан змінних у хеш-таблиці:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Змінні\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Специфічні дл� зразка значенн� змінних"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# �емає �пецифічних дл� зразка значень змінних."
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u �пецифічних дл� зразка значень змінних"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "попередженн�: невизначена змінна \"%.*s\""
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() повернуто код помилки %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Попередженн�: порожнє пере�пр�муванн�\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "внутрішн� помилка: «%s» command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+"-попередженн�, ймовірно, вам варто повторно увімкнути обробку CTRL-Y з DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "ВБУДОВ��ИЙ [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "ВБУДОВ��ИЙ CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "ВБУДОВ��ИЙ CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "�евідома вбудована команда \"%s\".\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Помилка, порожн� команда\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "Пере�пр�моване виведенн� з %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "Повідомленн� про помилку пере�пр�мовано до %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Допи�ати виведенні дані до %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "Пере�пр�мовуємо виведенн� до %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Допи�ати %.*s і �порожнити\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Замі�ть заданого виконуєть�� %s\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Помилка породженн� проце�у, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# Шл�хи пошуку VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# �е визначено шл�х пошуку \"vpath\"."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u шл�хи пошуку \"vpath\".\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# �е визначено загальний шл�х пошуку (змінна \"VPATH\")."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# Загальний шл�х пошуку (змінна \"VPATH\"):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "внутрішн� помилка: вказано декілька параметрів --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "внутрішн� помилка: вказано декілька ключів --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "віртуальна пам'�ть вичерпана"
+
+#~ msgid "write error"
+#~ msgstr "помилка запи�у"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "ВБУДОВ��ИЙ RM %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  �екоректне значенн� члена \"update_status\"!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "невідомий режим тра�уванн� «%s»"
diff --git a/po/vi.gmo b/po/vi.gmo
new file mode 100644
index 0000000..ee98bb2
--- /dev/null
+++ b/po/vi.gmo
diff --git a/po/vi.po b/po/vi.po
new file mode 100644
index 0000000..6e64cf0
--- /dev/null
+++ b/po/vi.po
@@ -0,0 +1,2312 @@
+# Vietnamese translation for Make.
+# Copyright © 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Clytie Siddall <clytie@riverland.net.au>, 2006-2010.
+# Nguyễn Thái Ng�c Duy <pclouds@gmail.com>, 2012.
+# Trần Ng�c Quân <vnwildman@gmail.com>, 2012-2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make-4.0\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-10-10 07:36+0700\n"
+"Last-Translator: Trần Ng�c Quân <vnwildman@gmail.com>\n"
+"Language-Team: Vietnamese <translation-team-vi@lists.sourceforge.net>\n"
+"Language: vi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Team-Website: <http://translationproject.org/team/vi.html>\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 1.5.5\n"
+"X-Poedit-SourceCharset: UTF-8\n"
+"X-Poedit-Language: Vietnamese\n"
+"X-Poedit-Country: VIET NAM\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "đã dùng tính năng chưa được hỗ trợ: “%s�"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "“touch� thành viên kho không có trên VMS"
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch: Kho “%s� không tồn tại"
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch: “%s� không phải là kho hợp lệ"
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch: Thành viên “%s� không tồn tại trong “%s�"
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch: Gặp mã trả lại sai từ ar_member_touch trên “%s�"
+
+#: arscan.c:124
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+"lbr$set_module() đã không giải nén thông tin v� mô-đun, trạng thái = %d"
+
+#: arscan.c:230
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control() bị lỗi với trạng thái = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "không thể mở thư viện “%s� để tra tìm thành viên “%s�"
+
+#: arscan.c:944
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "Thành viên “%s�%s: %ld byte tại %ld (%ld).\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (có lẽ tên bị cắt ngắn)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  Ngày %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d, gid = %d, chế độ = 0%o.\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr "Công thức có quá nhi�u dòng (%ud)"
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** Ngắt.\n"
+
+#: commands.c:629
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] Thành phần kho “%s� có thể là giả; chưa bị xóa b�"
+
+#: commands.c:633
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** Thành viên kho “%s� có thể là giả; chưa bị xóa b�"
+
+#: commands.c:647
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] �ang xoá tập tin “%s�"
+
+#: commands.c:649
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** �ang xoá tập tin “%s�"
+
+#: commands.c:685
+msgid "#  recipe to execute"
+msgstr "#  công thức cần thực hiện"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (dựng-sẵn):"
+
+#: commands.c:690
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (từ “%s�, dòng %lu):\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# Thư mục\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s: không thể lấy thống kê.\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (khoá %s, mtime %d): không thể mở.\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (thiết bị %d, nút thông tin [%d,%d,%d]): không thể mở.\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (thiết bị %ld, nút thông tin %ld): không thể mở.\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (khoá %s, mtime %d): "
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (thiết bị %d, inode [%d,%d,%d]): "
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (thiết bị %ld, inode %ld): "
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "Không"
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " tập tin, "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "không"
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " việc không thể làm được"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " cho đến gi�."
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " việc không thể làm được trong %lu thư mục.\n"
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "Biến đệ quy “%s� (cuối cùng) lại tham chiếu đến chính nó"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "tham chiếu biến chưa chấm dứt"
+
+#: file.c:271
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "Công thức được chỉ định cho tập tin “%s� tại %s:%lu,"
+
+#: file.c:276
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "Tìm thấy công thức cho tập tin “%s� nh� quy tắc tìm kiếm ngầm,"
+
+#: file.c:280
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "nhưng “%s� bây gi� được cũng được xem là cùng tập tin “%s�."
+
+#: file.c:283
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+"Công thức cho “%s� sẽ bị b� qua trong sự chấp thuận của một cái cho “%s�."
+
+#: file.c:303
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "không thể đổi tên “%s� hai chấm đơn thành “%s� hai chấm đôi"
+
+#: file.c:309
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "không thể đổi tên “%s� hai chấm đôi thành “%s� hai chấm đơn"
+
+#: file.c:401
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** �ang xoá tập tin trung gian “%s�"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "Xoá các tập tin trung gian...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "Gi� hiện tại"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s: Th�i gian của tập tin ở ngoài phạm vi nên thay thế bằng %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# Không phải là đích:"
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  Tập tin giá trị (đi�u kiện tiên quyết của .PRECIOUS)."
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  �ích giả (đi�u kiện tiên quyết của .PHONY)."
+
+#: file.c:964
+msgid "#  Command line target."
+msgstr "#  �ích dòng lệnh."
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  Mặc định, MAKEFILES, hoặc makefile kiểu -include/sinclude."
+
+#: file.c:968
+msgid "#  Builtin rule"
+msgstr "#  Quy tắc dựng sẵn"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  Hoàn tất tìm quy tắc ngầm."
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  Chưa hoàn tất tìm quy tắc ngầm."
+
+#: file.c:973
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  Cuống mẫu ngầm/tĩnh: “%s�\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  Tập tin là một đi�u kiện tiên quyết trung gian."
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  Cũng tạo:"
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  Chưa kiểm tra gi� sửa đổi."
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  Tập tin không tồn tại."
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  Tập tin rất cũ."
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  Lần sửa cuối cùng %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  Tập tin đã được cập nhật."
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  Tập tin chưa được cập nhật."
+
+#: file.c:1001
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  Công thức đang chạy (�ÂY LÀ MỘT LỖI)."
+
+#: file.c:1004
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  Công thức phụ thuộc đang chạy (�ÂY LÀ MỘT LỖI)."
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  Cập nhật thành công."
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  Cần được cập nhật (-q được đặt)."
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  Gặp lỗi khi cập nhật."
+
+#: file.c:1025
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  Gặp giá trị sai trong thành viên “command_state�!"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# Tập tin"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# thống kê bảng băm tập tin:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr "%s: Trư�ng “%s� chưa được nhớ đệm: %s"
+
+#: function.c:780
+msgid "non-numeric first argument to 'word' function"
+msgstr "đối số thứ nhất không phải dạng số cho hàm “word�"
+
+#: function.c:785
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "đối số thứ nhất cho hàm “word� phải lớn hơn 0"
+
+#: function.c:805
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "đối số thứ nhất không phải số cho hàm “wordlist�"
+
+#: function.c:807
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "đối số thứ hai không phải số cho hàm “wordlist�"
+
+#: function.c:1499
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(In) gặp lỗi (e=%ld)\n"
+
+#: function.c:1523
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "windows32_openpipe: DuplicateHandle(Err) gặp lỗi (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() bị lỗi (e=%ld)\n"
+
+#: function.c:1538
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe(): process_init_fd() gặp lỗi\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "D�n dẹp tập tin bó tạm %s\n"
+
+# Variable: do not translate/ biến: đừng dịch
+#: function.c:2193
+#, c-format
+msgid "open: %s: %s"
+msgstr "mở: %s: %s"
+
+#: function.c:2203
+#, c-format
+msgid "write: %s: %s"
+msgstr "ghi: %s: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr "Thao tác tập tin không hợp lệ: %s"
+
+#: function.c:2324
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "không đủ số đối số (%d) cho hàm “%s�"
+
+#: function.c:2336
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "chưa được viết mã thi hành trên hệ thống này: hàm “%s�"
+
+#: function.c:2399
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "cuộc g�i chưa được chấm dứt cho hàm “%s�: thiếu “%c�"
+
+#: function.c:2591
+#, fuzzy
+msgid "Empty function name"
+msgstr "Tên hàm trống rỗng\n"
+
+#: function.c:2593
+#, fuzzy, c-format
+msgid "Invalid function name: %s"
+msgstr "Tên hàm không hợp lệ: %s\n"
+
+#: function.c:2595
+#, fuzzy, c-format
+msgid "Function name too long: %s"
+msgstr "Tên hàm quá dài: %s\n"
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "số lượng đối số tối thiểu (%d) là không hợp lệ cho hàm “%s�\n"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "số lượng đối số tối đa (%d) là không hợp lệ cho hàm “%s�\n"
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s: tùy ch�n “%s� chưa rõ ràng\n"
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s: tùy ch�n “--%s� không nhận đối số\n"
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s: tùy ch�n “%c%s� không nhận đối số\n"
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s: tùy ch�n “%s� cần một đối số\n"
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s: không nhận ra tùy ch�n “--%s�\n"
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s: không nhận ra tùy ch�n “%c%s�\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: tùy ch�n không hợp lệ -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s: tùy ch�n không hợp lệ -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: tùy ch�n cần một đối số -- %c\n"
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s: tùy ch�n “-W %s� chưa rõ ràng\n"
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s: tùy ch�n “-W %s� không nhận một đối số\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr "guile: �ang khai triển “%s�\n"
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr "guile: �ang định giá “%s�\n"
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "không thể cấp phát %lu byte cho bảng băm: hết bộ nhớ"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "Tải =%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "Băm lại=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "Xung Ä‘á»™t  =%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "Tìm quy tắc ngầm cho “%s�.\n"
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "Tìm quy tắc ngầm v� thành phần kho cho “%s�.\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "Tránh quy tắc ngầm đệ quy.\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr "Stem quá dài: “%.*s�.\n"
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "Thử quy tắc mẫu với cuống “%.*s�.\n"
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "Từ chối đi�u kiện tiên quyết không thể th�a “%s�.\n"
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "Từ chối đi�u kiện tiên quyết ngầm không thể “%s�.\n"
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "Thử đi�u kiện tiên quyết quy tắc “%s�.\n"
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "Thử đi�u kiện tiên quyết ngầm “%s�.\n"
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "Tìm thấy đi�u kiện tiên quyết “%s� làm VPATH “%s�\n"
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "Tìm quy tắc có tập tin trung gian “%s�.\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "Không thể tạo tập tin tạm\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (đổ lõi)"
+
+#: job.c:488
+msgid " (ignored)"
+msgstr " (b� qua)"
+
+#: job.c:492 job.c:2046
+msgid "<builtin>"
+msgstr "<dựng-sẵn>"
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr "%s: công thức cho đích “%s� gặp lỗi"
+
+#: job.c:516 job.c:524
+#, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "%s[%s] Lá»—i %d%s"
+
+#: job.c:519
+#, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "%s[%s] Lá»—i 0x%x%s"
+
+# Variable: don't translate / Biến: đừng dịch
+#: job.c:529
+#, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s[%s] %s%s%s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** �ang đợi những công việc chưa hoàn tất..."
+
+#: job.c:651
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "Tiến trình con còn sống %p (%s) PID %s %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (máy chủ)"
+
+#: job.c:841
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "�ang mất tiến trình con %p PID %s %s\n"
+
+#: job.c:842
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "�ang thắng lại tiến trình con %p PID %s %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "D�n dẹp tập tin bó tạm %s\n"
+
+#: job.c:855
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "D�n dẹp tập tin bó tạm %s gặp lỗi (%d)\n"
+
+#: job.c:961
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "B� tiến trình con %p PID %s%s kh�i xâu.\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr "giải phóng tín hiệu jobserver: (Lỗi %ld: %s)"
+
+#: job.c:1024 job.c:1038
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "�ã giải phóng thẻ bài cho tiến trình con %p (%s).\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "ghi lại trình phục vụ công việc"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() gặp lỗi khi chạy tiến trình (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"�ếm được %d đối số trong lần khởi chạy bị lỗi\n"
+
+#: job.c:1735
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "�ặt tiến trình con %p (%s) PID %s%s vào xâu.\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr "ch� tín hiệu hay tiến trình con: (Lỗi %ld: %s)"
+
+#: job.c:2019
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "�ã lấy thẻ bài cho đi�u con  %p (%s).\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "đ�c ống dẫn công việc"
+
+#: job.c:2056
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "%s: đích “%s� không tồn tại"
+
+#: job.c:2059
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%s: cập nhật đích “%s�, cần bởi: %s"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "không thể buộc giới hạn tải trên hệ đi�u hành này"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "không thể buộc giới hạn tải: "
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+"không thể xử lý thêm tập tin nào nữa: không thể nhân đôi đầu vào chuẩn\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+"không thể xử lý thêm tập tin nào nữa: không thể nhân đôi đầu ra chuẩn\n"
+
+#: job.c:2278
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+"không thể xử lý thêm tập tin nào nữa: không thể nhân đôi đầu ra lỗi chuẩn\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "Không thể phục hồi đầu vào chuẩn\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "Không thể phục hồi đầu ra chuẩn\n"
+
+#: job.c:2309
+msgid "Could not restore stderr\n"
+msgstr "Không thể phục hồi đầu ra lỗi tiêu chuẩn\n"
+
+#: job.c:2420
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "đặt đi�u con đã bắt là PID %s, vẫn còn đợi PID %s\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s: Không tìm thấy lệnh"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s: Không tìm thấy chương trình hệ v�"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: cạn không gian dành cho biến môi trư�ng"
+
+#: job.c:2765
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL thay đổi (trước là “%s�, gi� là “%s�)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "Tạo tập tin bó lệnh tạm: %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+"Nội dung tập tin bó lệnh:\n"
+"\t@echo off\n"
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+"Nội dung tập tin bó lệnh:%s\n"
+"\t%s\n"
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (dòng %d) Ngữ cảnh shell sai (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr "-O[KIỂU] (--output-sync[=KIỂU]) chưa được cấu hình cho lần dịch này."
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr "Gặp lỗi khi mở bảng ký hiệu toàn cục: %s"
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr "�ối tượng %s đã được tải không được công bố là tương thích GPL"
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr "Gặp lỗi khi tải ký hiệu %s từ %s: %s"
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr "Tên ký hiệu là trống rỗng cho việc tải: %s"
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr "�ang tải ký hiệu %s từ %s\n"
+
+#: load.c:244
+msgid "The 'load' operation is not supported on this platform."
+msgstr "không hỗ trợ thao tác “load� trên hệ thống này."
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "Tùy ch�n:\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      B� qua để tương thích.\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           Tạo m�i đích vô đi�u kiện.\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C THƯ_MỤC, --directory=THƯ_MỤC\n"
+"                              Chuyển sang THƯ MỤC này trước khi làm.\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          In rất nhi�u thông tin gỡ rối.\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+"  --debug[=CỜ...]             In nhi�u loại thông tin gỡ rối khác nhau.\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              Biến môi trư�ng đè tập tin makefile.\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+"  --eval=CHUỖI                �ịnh lượng CHUỖI như một lệnh makefile.\n"
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f TẬP-TIN, --file=TẬP-TIN, --makefile=TẬP-TIN\n"
+"                              ��c TẬP-TIN dạng makefile.\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  Hiển thị trợ giúp này và thoát.\n"
+
+#: main.c:335
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         B� qua lỗi từ công thức.\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I THƯ_MỤC, --include-dir=THƯ_MỤC\n"
+"                              Quét THƯ-MỤC này tìm makefile con.\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          Cho phép N công việc đồng th�i; không có đối "
+"số thì vô hạn.\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr "  -k, --keep-going            Cứ tiếp tục khi không thể tạo đích.\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [S�], --load-average[=N], --max-load[=N]\n"
+"                              Chỉ chạy nhi�u công việc nếu tải dưới N.\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   Dùng mtime mới nhất giữa liên kết và đích.\n"
+
+#: main.c:349
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Không chạy công thức; chỉ in chúng ra.\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o TẬP-TIN, --old-file=TẬP-TIN, --assume-old=TẬP-TIN\n"
+"                              Coi TẬP-TIN là rất cũ và không tạo lại.\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+"  -O[KIỂU], --output-sync[=KIỂU]\n"
+"                              �ồng bộ hóa kết xuất công việc song song theo "
+"KIỂU.\n"
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       In cơ sở dữ liệu nội bộ của make.\n"
+
+#: main.c:360
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              Không chạy; mã thoát là \"đã cập nhật\".\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      Tắt quy tắc ngầm dựng sẵn.\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  Tắt đặt biến dựng sẵn.\n"
+
+#: main.c:366
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       Không in lại công thức.\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              Tắt -k.\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "  -t, --touch                 Chạm đích thay vì tạo lại.\n"
+
+#: main.c:373
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --trace                     Hiển thị thông tin dấu vết.\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               Hiển thị phiên bản make rồi thoát.\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       Hiển thị thư mục hiện th�i.\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr "  --no-print-directory        Tắt -w, thậm chí nếu được bật ngầm.\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W TẬP-TIN, --what-if=TẬP-TIN, --new-file=TẬP-TIN, --assume-new=TẬP-TIN\n"
+"                              Giả định TẬP-TIN là mới vô hạn.\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+"  --warn-undefined-variables  Cảnh báo tham chiếu đến biến chưa xác định.\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "chuỗi rỗng không hợp lệ làm tên tập tin"
+
+#: main.c:737
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "không hiểu đặc tả cấp gỡ rối “%s�"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr "không hiểu kiểu output-sync “%s�"
+
+#: main.c:828
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s: Bắt được ngắt/ngoại lệ (mã = 0x%lx, địa chỉ = 0x%p)\n"
+
+#: main.c:835
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"Bộ l�c ngoại lệ không quản lý được g�i từ chương trình %s\n"
+"ExceptionCode (mã ngoại lệ) = %lx\n"
+"ExceptionFlags (các c� ngoại lệ) = %lx\n"
+"ExceptionAddress (địa chỉ ngoại lệ) = 0x%p\n"
+
+#: main.c:843
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "Vi phạm truy cập: thao tác ghi tại địa chỉ 0x%p\n"
+
+#: main.c:844
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "Vi phạm truy cập: thao tác đ�c tại địa chỉ 0x%p\n"
+
+#: main.c:920 main.c:935
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell() đang đặt default_shell = %s\n"
+
+#: main.c:988
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell() đã quét đư�ng dẫn thì đặt default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s đang ngưng trong 30 giây..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "đã ngủ(30). Tiếp tục.\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+"lỗi nội tại: không thể mở c� hiệu máy phục vụ công việc “%s�: (Lỗi %ld: %s)"
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr "Ứng dụng khách jobserver (c� hiệu %s)\n"
+
+#: main.c:1534
+#, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "lỗi nội bộ: gặp chuỗi --jobserver-fds “%s� không hợp lệ"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr "Ứng dụng khách jobserver (fds %d,%d)\n"
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "cảnh báo: -jN bị ép buộc trong make con: tắt chế độ jobserver."
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "dup jobserver"
+
+#: main.c:1570
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+"cảnh báo: trình jobserver không sẵn sàng: dùng -j1. Thêm “+� vào quy tắc "
+"make cha."
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "Tập tin makefile từ đầu vào chuẩn được ghi hai lần."
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (tập tin tạm)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (tập tin tạm)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "Không hỗ trợ công việc song song (-j) trên hệ thống này."
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "�ặt lại thành chế độ công việc đơn (-j1)."
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr "Khe jobserver bị giới hạn thành %d\n"
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr "đang tạo tín hiệu jobserver: (Lỗi %ld: %s)"
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "tạo ống dẫn công việc"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "khởi tạo đư�ng ống “jobserver�"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "Không hỗ trợ liên kết m�m: tắt -L."
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "Cập nhật makefile...\n"
+
+#: main.c:2158
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefile “%s� bị lặp; không tạo lại nó.\n"
+
+#: main.c:2237
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "Gặp lỗi khi làm lại makefile “%s�."
+
+#: main.c:2257
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "Không tìm thấy makefile bao gồm “%s�."
+
+#: main.c:2262
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr "Không tìm thấy makefile “%s�."
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "Không thể chuyển v� thư mục gốc."
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "Thực hiện lại[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "unlink (b� liên kết tập tin tạm): "
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL chứa nhi�u đích"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "Chưa chỉ định đích, và không tìm thấy makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "Không có đích"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "�ang cập nhật đích mong muốn...\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+"cảnh báo: Phát hiện lệch gi�. Bản dịch của bạn có thể không hoàn thiện."
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "Cách dùng: %s [các_tùy_ch�n] [đích] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"Chương trình này đã được dịch cho %s\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"Chương trình này đã được dịch cho %s (%s)\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+"Hãy thông báo lỗi cho <bug-make@gnu.org>\n"
+"Hãy thông báo lỗi dịch cho <http://translationproject.org/team/vi.html>.\n"
+
+#: main.c:2807
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "tùy ch�n “%s%s� cần một đối số là chuỗi khác rỗng"
+
+#: main.c:2871
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "tùy ch�n “-%c� cần một đối số số nguyên dương"
+
+#: main.c:3269
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr "%s�ược dịch cho %s\n"
+
+#: main.c:3271
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr "%s�ược dịch cho %s (%s)\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+"%sGiấy phép GPL pb3+: Giấy phép Công cộng GNU phiên bản 3 hay sau <http://"
+"gnu.org/licenses/gpl.html>\n"
+"%s�ây là phần m�m tự do: bạn có quy�n sửa đổi và phát hành lại nó.\n"
+"%sKHÔNG CÓ BẢO HÀNH GÌ CẢ, với đi�u kiện được pháp luật cho phép.\n"
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# Cơ sở dữ liệu Make, in lúc %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# Hoàn tất cơ sở dữ liệu Make lúc %s\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "Lỗi lạ %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: ngư�i dùng %lu (thật %lu), nhóm %lu (thật %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "Truy cập đã được khởi tạo"
+
+#: misc.c:622
+msgid "User access"
+msgstr "Truy cập ngư�i dùng"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Truy cập Make"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "Truy cập con"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: Vào thư mục lạ\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: R�i kh�i thư mục lạ\n"
+
+#: output.c:109
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: Vào thư mục “%s�\n"
+
+#: output.c:111
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: R�i thư mục “%s�\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: Vào thư mục lạ\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: R�i thư mục lạ\n"
+
+#: output.c:120
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: Vào thư mục “%s�\n"
+
+#: output.c:122
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: R�i thư mục “%s�\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "lá»—i ghi: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr ".  Dừng.\n"
+
+# Variable: don't translate / Biến: đừng dịch
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+# Variable: do not translate/ biến: đừng dịch
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "�ang đ�c makefile...\n"
+
+#: read.c:335
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr "�ang đ�c makefile “%s�"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (không có mục đích mặc định)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (đư�ng dẫn tìm kiếm)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (không quan tâm)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (không nối thêm ~)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr "B� qua “UTF-8 BOM� trong makefile “%s�\n"
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr "B� qua “UTF-8 BOM� trong bộ đệm makefile\n"
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "cú pháp không hợp lệ trong biểu thức đi�u kiện"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr "%s: gặp lỗi khi tải"
+
+#: read.c:992
+msgid "recipe commences before first target"
+msgstr "công thức bắt đầu trước đích thứ nhất"
+
+#: read.c:1041
+msgid "missing rule before recipe"
+msgstr "thiếu quy tắc trước công thức"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (bạn đã định dùng TAB thay vì 8 khoảng trắng phải không?)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "thiếu dấu phân cách%s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "thiếu mẫu đích"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "nhi�u mẫu đích"
+
+#: read.c:1276
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr "mẫu đích không chứa “%%�"
+
+#: read.c:1398
+msgid "missing 'endif'"
+msgstr "thiếu chỉ thị “endif�"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "tên biến rỗng"
+
+#: read.c:1471
+msgid "extraneous text after 'define' directive"
+msgstr "gặp các ký tự thừa đằng sau chỉ thị “define�"
+
+#: read.c:1496
+msgid "missing 'endef', unterminated 'define'"
+msgstr "thiếu “endef�, chỉ thị “define� chưa hoàn thiện"
+
+#: read.c:1524
+msgid "extraneous text after 'endef' directive"
+msgstr "gặp các ký tự thừa đằng sau chỉ thị “endef�"
+
+#: read.c:1595
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "gặp các ký tự thừa đằng sau chỉ thị “%s�"
+
+#: read.c:1596
+#, c-format
+msgid "extraneous '%s'"
+msgstr "gặp “%s� thừa"
+
+#: read.c:1624
+msgid "only one 'else' per conditional"
+msgstr "chỉ cho phép một “else� cho mỗi biểu thức đi�u kiện"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "�ịnh nghĩa biến đích riêng biệt bị h�ng"
+
+#: read.c:1957
+msgid "prerequisites cannot be defined in recipes"
+msgstr "không thể định nghĩa đi�u kiện tiên quyết cho công thức"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "trộn lẫn quy tắc ngầm và mẫu tĩnh"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "trộn quy tắc ngầm và thư�ng"
+
+#: read.c:2091
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "đích “%s� không tương ứng với mẫu đích"
+
+#: read.c:2106 read.c:2152
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "tập tin đích “%s� có cả hai mục nhập : và ::"
+
+#: read.c:2112
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "đích “%s� có nhi�u hơn một trong cùng một quy tắc"
+
+#: read.c:2122
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "cảnh báo: đè công thức cho đích “%s�"
+
+#: read.c:2125
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "cảnh báo: b� qua công thức cũ cho đích “%s�"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "trộn quy tắc ngầm và thư�ng"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "cảnh báo: thấy ký tự NUL; b� qua phần còn lại của dòng"
+
+#: remake.c:230
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "Không cần làm gì cho “%s�."
+
+#: remake.c:231
+#, c-format
+msgid "'%s' is up to date."
+msgstr "�ã cập nhật “%s�."
+
+#: remake.c:303
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "Xén bớt tập tin “%s�.\n"
+
+#: remake.c:390 remake.c:393
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%sKhông có quy tắc để tạo đích “%s�, cần bởi “%s�%s"
+
+#: remake.c:402 remake.c:405
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%sKhông có quy tắc để tạo đích “%s�%s"
+
+#: remake.c:426
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "Coi tập tin đích “%s�.\n"
+
+#: remake.c:433
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "Vừa thử và thất bại khi cập nhật “%s�.\n"
+
+#: remake.c:445
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "Coi tập tin “%s� là đã sẵn có rồi.\n"
+
+#: remake.c:455
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "Vẫn đang cập nhật tập tin “%s�.\n"
+
+#: remake.c:458
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "Hoàn tất cập nhật tập tin “%s�.\n"
+
+#: remake.c:487
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "Tập tin “%s� không tồn tại.\n"
+
+#: remake.c:495
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+"*** Cảnh báo: tập tin .LOW_RESOLUTION_TIME “%s� có nhãn th�i gian độ phân "
+"giải cao"
+
+#: remake.c:508 remake.c:1040
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "Tìm thấy quy tắc ngầm cho “%s�.\n"
+
+#: remake.c:510 remake.c:1042
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "Không tìm thấy quy tắc ngầm cho “%s�.\n"
+
+#: remake.c:516
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "Dùng công thức mặc định cho “%s�.\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "B� phụ thuộc vòng tròn %s <- %s."
+
+#: remake.c:675
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "Hoàn tất đi�u kiện tiên quyết của tập tin đích “%s�.\n"
+
+#: remake.c:681
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "�ang tạo đi�u kiện tiên quyết của “%s�.\n"
+
+#: remake.c:695
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "Chịu thua tập tin đích “%s�.\n"
+
+#: remake.c:700
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "�ích “%s� không được tạo lại do lỗi."
+
+#: remake.c:752
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "�i�u kiện tiên quyết “%s� là order-only (chỉ thứ tự) cho đích “%s�.\n"
+
+#: remake.c:757
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "�i�u kiện tiên quyết “%s� của đích “%s� không tồn tại.\n"
+
+#: remake.c:762
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "�i�u kiện tiên quyết “%s� là mới hơn đích “%s� .\n"
+
+#: remake.c:765
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "�i�u kiện tiên quyết “%s� cũ hơn đích “%s� .\n"
+
+#: remake.c:783
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "�ích “%s� là hai chấm đôi và không có đi�u kiện tiên quyết.\n"
+
+#: remake.c:790
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+"Không có công thức cho “%s� và chưa thay đổi đi�u kiện tiên quyết nào.\n"
+
+#: remake.c:795
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "Tạo “%s� do c� “always-make�.\n"
+
+#: remake.c:803
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr "Không cần tạo lại đích “%s�."
+
+#: remake.c:805
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr "; dùng tên VPATH “%s�"
+
+#: remake.c:825
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "Phải tạo lại đích “%s�.\n"
+
+#: remake.c:831
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  B� qua tên VPATH “%s�.\n"
+
+#: remake.c:840
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "�ang chạy công thức của “%s�.\n"
+
+#: remake.c:847
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "Gặp lỗi khi tạo lại được tập tin đích “%s�.\n"
+
+#: remake.c:850
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "Tạo lại thành công tập tin đích “%s�.\n"
+
+#: remake.c:853
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "Tập tin đích “%s� cần được tạo lại dưới tùy ch�n “-q�.\n"
+
+#: remake.c:1048
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "Dùng lệnh mặc định cho “%s�.\n"
+
+#: remake.c:1397
+#, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "Cảnh báo: Tập tin “%s� có gi� sửa đổi ở thì tương lai."
+
+#: remake.c:1411
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "Cảnh báo: Tập tin “%s� có gi� sửa đổi %s giây trong thì tương lai."
+
+#: remake.c:1610
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr "Phần tử .LIBPATTERNS “%s� không phải là một mẫu"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "Phần tùy chỉnh không xuất được: %s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# Quy tắc ngầm"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# Không có quy tắc ngầm."
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u quy tắc ngầm, %u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " thiết bị cuối."
+
+#: rule.c:530
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "LỖI: num_pattern_rules không đúng!  %u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "tín hiệu lạ"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "Treo"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "Ngắt"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "Thoát"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "Chỉ lệnh không hợp lệ"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "Bẫy vết/điểm ngắt"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "Bị hủy b�"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "Bẫy IOT"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "Bẫy EMT"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "Ngoại lệ dấu chấm động"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "Bị buộc kết thúc"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "Lá»—i bus"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "Lỗi phân đoạn"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "Lệnh g�i hệ thống sai"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "�ng dẫn h�ng"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "�ồng hồ báo động"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "�ã chấm dứt"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "Tín hiệu tự định nghĩa 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "Tín hiệu tự định nghĩa 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "Tiến trình con đã thoát"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "Mất điện đột ngột"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "Bị ngừng"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "Bị ngừng (đầu vào tty)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "Bị ngừng (đầu ra tty)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "Bị ngừng (tín hiệu)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "Vượt giới hạn th�i gian CPU"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "Vượt giới hạn kích cỡ tập tin"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "Bộ đếm th�i gian ảo đã hết hạn"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "Hết hạn đếm th�i gian khi theo dõi cách sử dụng ti�m năng hệ thống"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "Cửa sổ bị thay đổi"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "�ã tiếp tục"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "�i�u kiện I/O khẩn cấp"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O có thể"
+
+# Literal: don't translate / Nghĩa chữ: đừng dịch
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+# Literal: don't translate / Nghĩa chữ: đừng dịch
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "Tài nguyên bị mất"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "Tín hiệu nguy hiểm"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "Yêu cầu thông tin"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "Không có bộ đồng xử lý số thực dấu chấm động"
+
+#: strcache.c:236
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+"\n"
+"%s Không có bộ đệm strcache\n"
+
+#: strcache.c:266
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+"\n"
+"%s bộ đệm strcache:  %lu (%lu) / chuỗi   = %lu / lưu     = %lu B / t.bình = "
+"%lu B\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+"%s đệm hiện tại: kcỡ = %hu B / đã dùng = %hu B / slượng = %hu / tbình = %hu "
+"B\n"
+
+#: strcache.c:280
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s được dùng khác: tổng = %lu B / s.lượng = %lu / t.bình = %lu B\n"
+
+#: strcache.c:283
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+"%s trống khác:  tổng = %lu B / tđa = %lu B / t.thiểu = %lu B / t.bình = %hu "
+"B\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+"\n"
+"%s hiệu năng strcache:   tra cứu = %lu / tỷ lệ trúng = %lu%%\n"
+
+#: strcache.c:289
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"# thống kê bảng băm tập tin:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "tá»± Ä‘á»™ng"
+
+#: variable.c:1602
+msgid "default"
+msgstr "mặc định"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "môi trư�ng"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "môi trư�ng với -e"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "dòng lệnh"
+
+#: variable.c:1617
+msgid "'override' directive"
+msgstr "chỉ thị “override�"
+
+#: variable.c:1628
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (từ “%s�, dòng %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# thống kê bảng băm biến được đặt:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# Biến\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Giá trị biến đặc tả cho mẫu"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# Không có giá trị biến đặc tả cho mẫu"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u giá trị biến đặc tả cho mẫu"
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "cảnh báo: biến “%.*s� chưa được định nghĩa"
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search() gặp lỗi với %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "Cảnh báo: Chuyển hướng trống rỗng\n"
+
+#: vmsjobs.c:183
+#, c-format
+msgid "internal error: '%s' command_state"
+msgstr "lỗi nội bộ: command_state “%s�"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-warning, có lẽ bạn cần phải bật lại xử lý CTRL-Y từ DCL.\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "Không hiểu lệnh dựng sẵn “%s�\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "Lỗi, lệnh trống rỗng\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "�ã chuyển hướng đầu vào từ %s\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "�ã chuyển hướng lỗi tới %s\n"
+
+#: vmsjobs.c:690
+#, c-format
+msgid "Append output to %s\n"
+msgstr "Nối thêm đầu ra vào %s\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "�ã chuyển hướng đầu ra tới %s\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr "Nối thêm %.*s và d�n dẹp\n"
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "Thực hiện %s để thay thế\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "Gặp lỗi sản sinh tiến trình, %d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# �ư�ng dẫn tìm kiếm VPATH\n"
+
+#: vpath.c:600
+msgid "# No 'vpath' search paths."
+msgstr "# Không có đư�ng dẫn tìm kiếm “vpath�."
+
+#: vpath.c:602
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u đư�ng dẫn tìm kiếm “vpath�.\n"
+
+#: vpath.c:605
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# Không có đư�ng dẫn tìm kiếm chung (biến “VPATH�)."
+
+#: vpath.c:611
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# �ư�ng dẫn tìm kiếm chung (biến “VPATH�):\n"
+"# "
+
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "lỗi nội bộ: có nhi�u tùy ch�n --sync-mutex"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "lỗi nội bộ: có nhi�u tùy ch�n --jobserver-fds"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "hết bộ nhớ ảo"
+
+#~ msgid "write error"
+#~ msgstr "lá»—i ghi"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  Gặp giá trị sai trong thành phần “update_status�!"
+
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "không hiểu chế độ theo vết “%s�"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] Lỗi 0x%x (b� qua)"
+
+#~ msgid "Invoking recipe from %s:%lu to update target `%s'.\n"
+#~ msgstr "G�i công thức từ %s:%lu để cập nhật đích “%s�.\n"
+
+#~ msgid "Invoking builtin recipe to update target `%s'.\n"
+#~ msgstr "G�i công thức dựng sẵn để cập nhật đích “%s�.\n"
+
+#~ msgid "%s # of strcache buffers: %d (* %d B/buffer = %d B)\n"
+#~ msgstr "%s # vùng đệm strcache: %d (* %d B/buffer = %d B)\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# strcache hash-table stats:\n"
+#~ "# "
+#~ msgstr ""
+#~ "\n"
+#~ "# thống kê bảng băm strcache:\n"
+#~ "# "
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr ""
+#~ "Việc process_easy() (tiến trình dễ) bị lỗi khi cố khởi chạy tiến trình (e="
+#~ "%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%sPhần m�m này tự do; hãy xem mã nguồn để tìm thấy đi�u kiện sao chép.\n"
+#~ "%sKhông bảo đảm gì cả, dù khả năng bán hay khả năng làm việc dứt khoát.\n"
+#~ "%s\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "gặp “endef� bắt nguồn ở ngoài"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "chỉ thị “override� (đè) rỗng"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "chỉ thị “override� (đè) không hợp lệ"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "• cảnh báo, CTRL-Y sẽ để một số tiến trình con còn lại.\n"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "�ừng ghi rõ “-j� hay “--jobs� nếu <sh.exe> không sẵn sàng."
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "�ang đặt lại trình make cho chế độ công việc đơn."
diff --git a/po/zh_CN.gmo b/po/zh_CN.gmo
new file mode 100644
index 0000000..54b7430
--- /dev/null
+++ b/po/zh_CN.gmo
diff --git a/po/zh_CN.po b/po/zh_CN.po
new file mode 100644
index 0000000..2282094
--- /dev/null
+++ b/po/zh_CN.po
@@ -0,0 +1,2373 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# This file is distributed under the same license as the make package.
+# Wang Li <charles@linux.net.cn>, 2002.
+# LI Daobing <lidaobing@gmail.com>, 2008, 2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: make 3.99.90\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2014-10-05 12:25-0400\n"
+"PO-Revision-Date: 2013-06-12 15:54+0800\n"
+"Last-Translator: LI Daobing <lidaobing@gmail.com>\n"
+"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
+"Language: zh_CN\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, fuzzy, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr "试图使用�支�的功能：“%s�"
+
+#: ar.c:123
+msgid "touch archive member is not available on VMS"
+msgstr "VMS 系统上�支� touch 归档�员"
+
+#: ar.c:147
+#, fuzzy, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr "touch：归档文件“%s��存在"
+
+#: ar.c:150
+#, fuzzy, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr "touch：“%s��是�法的归档文件"
+
+#: ar.c:157
+#, fuzzy, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr "touch：在“%2$s�中�存在�员“%1$s�"
+
+#: ar.c:164
+#, fuzzy, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr "touch：�自“%s�上的 ar_member_touch 的错误返回�"
+
+#: arscan.c:124
+#, fuzzy, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr "lbr$set_modules 获�模�信�失败，返回状� = %d"
+
+#: arscan.c:230
+#, fuzzy, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr "lbr$ini_control 失败，返回状� = %d"
+
+#: arscan.c:255
+#, fuzzy, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr "无法打开库“%s�以寻找�员“%s�"
+
+#: arscan.c:944
+#, fuzzy, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr "�员“%s�%s: %ld 字节在 %ld (%ld)。\n"
+
+#: arscan.c:945
+msgid " (name might be truncated)"
+msgstr " (�称�能被截短)"
+
+#: arscan.c:947
+#, c-format
+msgid "  Date %s"
+msgstr "  日期 %s"
+
+#: arscan.c:948
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr "  uid = %d，gid = %d，mode = 0%o。\n"
+
+#: commands.c:404
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:505
+msgid "*** Break.\n"
+msgstr "*** 中断。\n"
+
+#: commands.c:629
+#, fuzzy, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr "*** [%s] 归档�员“%s��能是�的；未删除"
+
+#: commands.c:633
+#, fuzzy, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr "*** 归档�员“%s��能是�的；未删除"
+
+#: commands.c:647
+#, fuzzy, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr "*** [%s] 正在删除文件“%s�"
+
+#: commands.c:649
+#, fuzzy, c-format
+msgid "*** Deleting file '%s'"
+msgstr "*** 正在删除文件“%s�"
+
+#: commands.c:685
+#, fuzzy
+msgid "#  recipe to execute"
+msgstr "#  �执行的命令"
+
+#: commands.c:688
+msgid " (built-in):"
+msgstr " (内置)："
+
+#: commands.c:690
+#, fuzzy, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr " (从“%s�，行 %lu)：\n"
+
+#: dir.c:989
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+"\n"
+"# 目录\n"
+
+#: dir.c:1001
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr "# %s：无法对其进行 stat �作。\n"
+
+#: dir.c:1005
+#, c-format
+msgid "# %s (key %s, mtime %d): could not be opened.\n"
+msgstr "# %s (关键字 %s，修改时间 %d)：无法打开。\n"
+
+#: dir.c:1009
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr "# %s (设备 %d，i-节点 [%d,%d,%d])：无法打开。\n"
+
+#: dir.c:1014
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr "# %s (设备 %ld，i-节点 %ld)：无法打开。\n"
+
+#: dir.c:1041
+#, c-format
+msgid "# %s (key %s, mtime %d): "
+msgstr "# %s (关键字 %s，修改时间 %d)："
+
+#: dir.c:1045
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr "# %s (设备 %d，i-节点 [%d,%d,%d])："
+
+#: dir.c:1050
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr "# %s (设备 %ld，i-节点 %ld)："
+
+#: dir.c:1056 dir.c:1077
+msgid "No"
+msgstr "æ— "
+
+#: dir.c:1059 dir.c:1080
+msgid " files, "
+msgstr " 文件， "
+
+#: dir.c:1061 dir.c:1082
+msgid "no"
+msgstr "æ— "
+
+#: dir.c:1064
+msgid " impossibilities"
+msgstr " ��能"
+
+#: dir.c:1068
+msgid " so far."
+msgstr " 迄今为止。"
+
+#: dir.c:1085
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr " ��能在 %lu 目录中。\n"
+
+#: expand.c:125
+#, fuzzy, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr "递归��“%s�应用自身 (最终)"
+
+#: expand.c:269
+msgid "unterminated variable reference"
+msgstr "未终止的��引用"
+
+#: file.c:271
+#, fuzzy, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr "关于文件“%s�的命令在 %s:%lu 处指定，"
+
+#: file.c:276
+#, fuzzy, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr "关于文件“%s�的命令通过��规则�索而找到，"
+
+#: file.c:280
+#, fuzzy, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr "但“%s�现在被看�“%s�的�一个文件。"
+
+#: file.c:283
+#, fuzzy, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr "“%2$s�更优先，“%1$s�的命令被忽略。"
+
+#: file.c:303
+#, fuzzy, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr "无法将�冒�“%s��命�为�冒�“%s�"
+
+#: file.c:309
+#, fuzzy, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr "无法将�冒�“%s��命�为�冒�“%s�"
+
+#: file.c:401
+#, fuzzy, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr "*** 正在删除中间文件“%s�"
+
+#: file.c:405
+msgid "Removing intermediate files...\n"
+msgstr "正在删除中间文件...\n"
+
+#: file.c:811
+msgid "Current time"
+msgstr "当�时间"
+
+#: file.c:815
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr "%s：时间标记超出范围；正在替� %s"
+
+#: file.c:955
+msgid "# Not a target:"
+msgstr "# �是一个目标："
+
+#: file.c:960
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr "#  ��文件 (.PRECIOUS的��)。"
+
+#: file.c:962
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr "#  �目标 (.PHONY的��)。"
+
+#: file.c:964
+#, fuzzy
+msgid "#  Command line target."
+msgstr "#  命令行目标。"
+
+#: file.c:966
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr "#  缺�的�MAKEFILES 指定的�-include/sinclude 包�的 makefile。"
+
+#: file.c:968
+#, fuzzy
+msgid "#  Builtin rule"
+msgstr ""
+"\n"
+"# 没有��规则。"
+
+#: file.c:970
+msgid "#  Implicit rule search has been done."
+msgstr "#  对��规则的�索已完�。"
+
+#: file.c:971
+msgid "#  Implicit rule search has not been done."
+msgstr "#  对��规则的�索尚未完�。"
+
+#: file.c:973
+#, fuzzy, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr "#  ��/��模�主干：“%s�\n"
+
+#: file.c:975
+msgid "#  File is an intermediate prerequisite."
+msgstr "#  文件是一个中间��。"
+
+#: file.c:979
+msgid "#  Also makes:"
+msgstr "#  还�创建："
+
+#: file.c:985
+msgid "#  Modification time never checked."
+msgstr "#  从�检查修改时间。"
+
+#: file.c:987
+msgid "#  File does not exist."
+msgstr "#  文件�存在。"
+
+#: file.c:989
+msgid "#  File is very old."
+msgstr "#  文件�常陈旧。"
+
+#: file.c:994
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr "#  最近更新 %s\n"
+
+#: file.c:997
+msgid "#  File has been updated."
+msgstr "#  文件已�被更新。"
+
+#: file.c:997
+msgid "#  File has not been updated."
+msgstr "#  文件尚未被更新。"
+
+#: file.c:1001
+#, fuzzy
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr "#  正在�行的命令 (这是个错误)。"
+
+#: file.c:1004
+#, fuzzy
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr "#  正在�行的�赖性命令 (这是个错误)。"
+
+#: file.c:1013
+msgid "#  Successfully updated."
+msgstr "#  更新�功。"
+
+#: file.c:1017
+msgid "#  Needs to be updated (-q is set)."
+msgstr "#  需�更新 (用 -q 设定)。"
+
+#: file.c:1020
+msgid "#  Failed to be updated."
+msgstr "#  更新失败。"
+
+#: file.c:1025
+#, fuzzy
+msgid "#  Invalid value in 'command_state' member!"
+msgstr "#  “command_state��员中无效的值�"
+
+#: file.c:1044
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+"\n"
+"# 文件"
+
+#: file.c:1048
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# 文件�凑表状�:\n"
+"# "
+
+#: file.c:1058
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:780
+#, fuzzy
+msgid "non-numeric first argument to 'word' function"
+msgstr "“word�函数的第一个�数�是数值�数"
+
+#: function.c:785
+#, fuzzy
+msgid "first argument to 'word' function must be greater than 0"
+msgstr "“word�函数的第一个�数必须大于 0"
+
+#: function.c:805
+#, fuzzy
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr "“wordlist�函数的第一个�数�是数值�数"
+
+#: function.c:807
+#, fuzzy
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr "“wordlist�函数的第二个�数�是数值�数"
+
+#: function.c:1499
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr "创建�进程：�制�柄(In)失败 (e=%ld)\n"
+
+#: function.c:1523
+#, fuzzy, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr "创建�进程：�制�柄(Err)失败 (e=%ld)\n"
+
+#: function.c:1530
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr "CreatePipe() 失败 (e=%ld)\n"
+
+#: function.c:1538
+#, fuzzy
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr "windows32_openpipe ()：process_init_fd() 失败\n"
+
+#: function.c:1832
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr "正在清除临时批处�文件 %s\n"
+
+#: function.c:2193
+#, fuzzy, c-format
+msgid "open: %s: %s"
+msgstr "%s: %s"
+
+#: function.c:2203
+#, fuzzy, c-format
+msgid "write: %s: %s"
+msgstr "写错误: %s"
+
+#: function.c:2209
+#, c-format
+msgid "Invalid file operation: %s"
+msgstr ""
+
+#: function.c:2324
+#, fuzzy, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr "函数“%2$s�的�数数�(%1$d)�够"
+
+#: function.c:2336
+#, fuzzy, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr "在本平�上未实现：函数“%s�"
+
+#: function.c:2399
+#, fuzzy, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr "对函数“%s�的未终止的调用：��“%c�"
+
+#: function.c:2591
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2593
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2595
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2598
+#, fuzzy, c-format
+msgid "Invalid minimum argument count (%d) for function %s"
+msgstr "函数“%2$s�的�数数�(%1$d)�够"
+
+#: function.c:2601
+#, fuzzy, c-format
+msgid "Invalid maximum argument count (%d) for function %s"
+msgstr "函数“%2$s�的�数数�(%1$d)�够"
+
+#: getopt.c:659
+#, fuzzy, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr "%s：选项“%s��义�清\n"
+
+#: getopt.c:683
+#, fuzzy, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr "%s：选项“--%s��需��数\n"
+
+#: getopt.c:688
+#, fuzzy, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr "%s：选项“%c%s��需��数\n"
+
+#: getopt.c:705 getopt.c:878
+#, fuzzy, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr "%s：选项“%s�需�一个�数\n"
+
+#: getopt.c:734
+#, fuzzy, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr "%s：无法识别的选项“--%s�\n"
+
+#: getopt.c:738
+#, fuzzy, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr "%s：无法识别的选项“%c%s�\n"
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s：�法选项 -- %c\n"
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr "%s：�法选项 -- %c\n"
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s：选项需�一个�数 -- %c\n"
+
+#: getopt.c:844
+#, fuzzy, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr "%s：选项“-W %s��义�清\n"
+
+#: getopt.c:862
+#, fuzzy, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr "%s：选项“-W %s���许给出�数\n"
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, fuzzy, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr "无法为�凑表分� %ld 字节: 内存耗尽"
+
+#: hash.c:280
+#, c-format
+msgid "Load=%ld/%ld=%.0f%%, "
+msgstr "è´Ÿè½½=%ld/%ld=%.0f%%, "
+
+#: hash.c:282
+#, c-format
+msgid "Rehash=%d, "
+msgstr "�新�凑=%d, "
+
+#: hash.c:283
+#, c-format
+msgid "Collisions=%ld/%ld=%.0f%%"
+msgstr "碰撞=%ld/%ld=%.0f%%"
+
+#: implicit.c:38
+#, fuzzy, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr "正在为“%s�寻找��规则。\n"
+
+#: implicit.c:54
+#, fuzzy, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr "正在为“%s�寻找归档�员��规则。\n"
+
+#: implicit.c:310
+msgid "Avoiding implicit rule recursion.\n"
+msgstr "����规则递归。\n"
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, fuzzy, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr "以主干“%.*s��试匹�模�规则。\n"
+
+#: implicit.c:697
+#, fuzzy, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr "拒���能的规则��“%s�。\n"
+
+#: implicit.c:698
+#, fuzzy, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr "拒���能的����“%s�。\n"
+
+#: implicit.c:711
+#, fuzzy, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr "�试规则��“%s�。\n"
+
+#: implicit.c:712
+#, fuzzy, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr "�试����“%s�。\n"
+
+#: implicit.c:751
+#, fuzzy, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr "��“%s�在 VPATH “%s� 中�现\n"
+
+#: implicit.c:765
+#, fuzzy, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr "正在寻找使用中间文件“%s�的规则。\n"
+
+#: job.c:361
+msgid "Cannot create a temporary file\n"
+msgstr "无法创建临时文件\n"
+
+#: job.c:483
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: job.c:488
+#, fuzzy
+msgid " (ignored)"
+msgstr "[%s] 错误 %d (忽略)"
+
+#: job.c:492 job.c:2046
+#, fuzzy
+msgid "<builtin>"
+msgstr " (内置)："
+
+#: job.c:503
+#, c-format
+msgid "%s: recipe for target '%s' failed"
+msgstr ""
+
+#: job.c:516 job.c:524
+#, fuzzy, c-format
+msgid "%s[%s] Error %d%s"
+msgstr "*** [%s] 错误 %d"
+
+#: job.c:519
+#, fuzzy, c-format
+msgid "%s[%s] Error 0x%x%s"
+msgstr "*** [%s] 错误 0x%x"
+
+#: job.c:529
+#, fuzzy, c-format
+msgid "%s[%s] %s%s%s"
+msgstr "%s%s: %s"
+
+#: job.c:621
+msgid "*** Waiting for unfinished jobs...."
+msgstr "*** 正在等待未完�的任务...."
+
+#: job.c:651
+#, fuzzy, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr "活跃�进程 0x%08lx (%s) PID %ld %s\n"
+
+#: job.c:653 job.c:843 job.c:962 job.c:1737
+msgid " (remote)"
+msgstr " (远程)"
+
+#: job.c:841
+#, fuzzy, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr "正在中止失败的�进程 0x%08lx PID %ld %s\n"
+
+#: job.c:842
+#, fuzzy, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr "正在中止获胜的�进程 0x%08lx PID %ld %s\n"
+
+#: job.c:849
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr "正在清除临时批文件 %s\n"
+
+#: job.c:855
+#, fuzzy, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr "正在清除临时批文件 %s\n"
+
+#: job.c:961
+#, fuzzy, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr "从链中删除�进程 0x%08lx PID %ld%s。\n"
+
+#: job.c:1021
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:1024 job.c:1038
+#, fuzzy, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr "为�进程 0x%08lx (%s) 释放令牌(token)。\n"
+
+#: job.c:1036
+msgid "write jobserver"
+msgstr "写入任务�务器"
+
+#: job.c:1662 job.c:2387
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr "process_easy() �动进程失败 (e=%ld)\n"
+
+#: job.c:1666 job.c:2391
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+"\n"
+"失败执行中共有 %d 个�数。\n"
+
+#: job.c:1735
+#, fuzzy, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr "将�进程 0x%08lx (%s) PID %ld%s 放入链。\n"
+
+#: job.c:2005
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
+
+#: job.c:2019
+#, fuzzy, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr "获得至进程 0x%08lx (%s) 的标记。\n"
+
+#: job.c:2029
+msgid "read jobs pipe"
+msgstr "读�任务管�"
+
+#: job.c:2056
+#, fuzzy, c-format
+msgid "%s: target '%s' does not exist"
+msgstr "touch：归档文件“%s��存在"
+
+#: job.c:2059
+#, fuzzy, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr "%1$s没有规则�以创建“%3$s�%4$s需�的目标“%2$s�"
+
+#: job.c:2171
+msgid "cannot enforce load limits on this operating system"
+msgstr "无法在本�作系统中实施负载�制"
+
+#: job.c:2173
+msgid "cannot enforce load limit: "
+msgstr "无法实施负载�制："
+
+#: job.c:2252
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr "没有剩余的文件�柄: 无法�制标准输入\n"
+
+#: job.c:2264
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr "没有剩余的文件�柄: 无法�制标准输出\n"
+
+#: job.c:2278
+#, fuzzy
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr "没有剩余的文件�柄: 无法�制标准输入\n"
+
+#: job.c:2293
+msgid "Could not restore stdin\n"
+msgstr "无法还原标准输入\n"
+
+#: job.c:2301
+msgid "Could not restore stdout\n"
+msgstr "无法还原标准输出\n"
+
+#: job.c:2309
+#, fuzzy
+msgid "Could not restore stderr\n"
+msgstr "无法还原标准输入\n"
+
+#: job.c:2420
+#, fuzzy, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr "make 已中止的�进程 pid %ld，�在等待 pid %ld\n"
+
+#: job.c:2458
+#, c-format
+msgid "%s: Command not found"
+msgstr "%s：命令未找到"
+
+#: job.c:2518
+#, c-format
+msgid "%s: Shell program not found"
+msgstr "%s：未找到 shell 程�"
+
+#: job.c:2527
+msgid "spawnvpe: environment space might be exhausted"
+msgstr "spawnvpe: 环境��空间�能会耗尽"
+
+#: job.c:2765
+#, fuzzy, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr "$SHELL 已改� (原为“%s�，现为“%s�)\n"
+
+#: job.c:3198 job.c:3383
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr "正在创建临时批文件 %s\n"
+
+#: job.c:3206
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3395
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3503
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr "%s (行 %d) 错误的 shell 上下文 (!unixy && !batch_mode_shell)\n"
+
+#: job.h:43
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:205
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:244
+#, fuzzy
+msgid "The 'load' operation is not supported on this platform."
+msgstr "本平��支�并行任务 (-j)。"
+
+#: main.c:313
+msgid "Options:\n"
+msgstr "选项：\n"
+
+#: main.c:314
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr "  -b, -m                      忽略兼容性。\n"
+
+#: main.c:316
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr "  -B, --always-make           无�件 make 所有目标。\n"
+
+#: main.c:318
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              在执行�先切�到 DIRECTORY 目录。\n"
+
+#: main.c:321
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr "  -d                          打�大�调试信�。\n"
+
+#: main.c:323
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr "  --debug[=FLAGS]             打���调试信�。\n"
+
+#: main.c:325
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+"  -e, --environment-overrides\n"
+"                              环境��覆盖 makefile 中的��。\n"
+
+#: main.c:328
+msgid ""
+"  --eval=STRING               Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:330
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              从 FILE 中读入 makefile。\n"
+
+#: main.c:333
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr "  -h, --help                  打�该消�并退出。\n"
+
+#: main.c:335
+#, fuzzy
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr "  -i, --ignore-errors         忽略�自命令的错误。\n"
+
+#: main.c:337
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              在 DIRECTORY 中�索被包�的 makefile。\n"
+
+#: main.c:340
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+"  -j [N], --jobs[=N]          �时�许 N 个任务；无�数表明�许无�个任务。\n"
+
+#: main.c:342
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr "  -k, --keep-going            当�些目标无法创建时�然继续。\n"
+
+#: main.c:344
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              在系统负载高于 N 时��动多任务。\n"
+
+#: main.c:347
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+"  -L, --check-symlink-times   使用软链接�软链接目标中修改时间较晚的一个。\n"
+
+#: main.c:349
+#, fuzzy
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              �打�命令，�实际执行。\n"
+
+#: main.c:352
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              将 FILE 当�很旧，�必�新生�。\n"
+
+#: main.c:355
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:358
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr "  -p, --print-data-base       打� make 的内部数�库。\n"
+
+#: main.c:360
+#, fuzzy
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+"  -q, --question              ��行任何命令；退出状�说明是�已全部更新。\n"
+
+#: main.c:362
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr "  -r, --no-builtin-rules      �用内置��规则。\n"
+
+#: main.c:364
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr "  -R, --no-builtin-variables  �用内置��设置。\n"
+
+#: main.c:366
+#, fuzzy
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr "  -s, --silent, --quiet       �输出命令。\n"
+
+#: main.c:368
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+"  -S, --no-keep-going, --stop\n"
+"                              关闭 -k。\n"
+
+#: main.c:371
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr "  -t, --touch                 touch 目标而�是�新创建它们。\n"
+
+#: main.c:373
+#, fuzzy
+msgid "  --trace                     Print tracing information.\n"
+msgstr "  --debug[=FLAGS]             打���调试信�。\n"
+
+#: main.c:375
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr "  -v, --version               打� make 的版本�并退出。\n"
+
+#: main.c:377
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr "  -w, --print-directory       打�当�目录。\n"
+
+#: main.c:379
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr "  --no-print-directory        关闭 -w，�使 -w 默认开�。\n"
+
+#: main.c:381
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              将 FILE 当�最新。\n"
+
+#: main.c:384
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr "  --warn-undefined-variables  当引用未定义��的时候�出警告。\n"
+
+#: main.c:654
+msgid "empty string invalid as file name"
+msgstr "空字符串是无效的文件�"
+
+#: main.c:737
+#, fuzzy, c-format
+msgid "unknown debug level specification '%s'"
+msgstr "未知的调试级别“%s�"
+
+#: main.c:774
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:828
+#, fuzzy, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr "%s：�获中断/异常 (代� = 0x%lx, 地� = 0x%lx)\n"
+
+#: main.c:835
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+"\n"
+"从程� %s 产生的未处�的异常过滤器\n"
+"异常� = %lx\n"
+"异常标志 = %lx\n"
+"异常地� = %lx\n"
+
+#: main.c:843
+#, fuzzy, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr "访问冲�：地� %lx 处的写�作\n"
+
+#: main.c:844
+#, fuzzy, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr "访问冲�：地� %lx处的读�作\n"
+
+#: main.c:920 main.c:935
+#, fuzzy, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr "find_and_set_shell 设置 default_shell = %s\n"
+
+#: main.c:988
+#, fuzzy, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr "find_and_set_shell 路径�索结果设置 default_shell = %s\n"
+
+#: main.c:1436
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr "%s 正在挂起 30 秒..."
+
+#: main.c:1438
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr "�眠完�(30)。继续。\n"
+
+#: main.c:1527
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: main.c:1530
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: main.c:1534
+#, fuzzy, c-format
+msgid "internal error: invalid --jobserver-fds string '%s'"
+msgstr "内部错误：�法 --jobserver-fds 字符串“%s�"
+
+#: main.c:1537
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: main.c:1551
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr "警告: � make 中强制 -jN: 关闭 jobserver 模�。"
+
+#: main.c:1567
+msgid "dup jobserver"
+msgstr "�制任务�务器"
+
+#: main.c:1570
+#, fuzzy
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr "警告: jobserver �存在: 使用 -j1。添加 “+� 到父 make 的规则。"
+
+#: main.c:1742
+msgid "Makefile from standard input specified twice."
+msgstr "两次指明�自标准输入的 makefile。"
+
+#: main.c:1780 vmsjobs.c:653
+msgid "fopen (temporary file)"
+msgstr "fopen (临时文件)"
+
+#: main.c:1786
+msgid "fwrite (temporary file)"
+msgstr "fwrite (临时文件)"
+
+#: main.c:1974
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr "本平��支�并行任务 (-j)。"
+
+#: main.c:1975
+msgid "Resetting to single job (-j1) mode."
+msgstr "�置为�任务模� (-j1)。"
+
+#: main.c:1994
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: main.c:2002
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: main.c:2008
+msgid "creating jobs pipe"
+msgstr "正在创建任务管�"
+
+#: main.c:2028
+msgid "init jobserver pipe"
+msgstr "创始化任务�务器管�"
+
+#: main.c:2047
+msgid "Symbolic links not supported: disabling -L."
+msgstr "�支�软链接: 关闭 -L"
+
+#: main.c:2133
+msgid "Updating makefiles....\n"
+msgstr "正在更新 makefile....\n"
+
+#: main.c:2158
+#, fuzzy, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr "Makefile “%s��能循环；�会�新创建它。\n"
+
+#: main.c:2237
+#, fuzzy, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr "�新创建 makefile “%s� 失败。"
+
+#: main.c:2257
+#, fuzzy, c-format
+msgid "Included makefile '%s' was not found."
+msgstr "找�到被引入的 makefile “%s�"
+
+#: main.c:2262
+#, fuzzy, c-format
+msgid "Makefile '%s' was not found"
+msgstr "找�到 makefile “%s�"
+
+#: main.c:2330
+msgid "Couldn't change back to original directory."
+msgstr "无法回到原始目录。"
+
+#: main.c:2343
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr "�新执行[%u]:"
+
+#: main.c:2453
+msgid "unlink (temporary file): "
+msgstr "删除 (临时文件)："
+
+#: main.c:2486
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ".DEFAULT_GOAL 包�多余一个目标"
+
+#: main.c:2509
+msgid "No targets specified and no makefile found"
+msgstr "没有指明目标并且找�到 makefile"
+
+#: main.c:2511
+msgid "No targets"
+msgstr "无目标"
+
+#: main.c:2516
+msgid "Updating goal targets....\n"
+msgstr "更新目标....\n"
+
+#: main.c:2541
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr "警告：检测到时钟错误。您的创建�能是�完整的。"
+
+#: main.c:2710
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr "用法：%s [选项] [目标] ...\n"
+
+#: main.c:2716
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+"\n"
+"该程�为 %s 编译\n"
+
+#: main.c:2718
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+"\n"
+"该程�为 %s (%s) 编译\n"
+
+#: main.c:2721
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr "报告错误到 <bug-make@gnu.org>\n"
+
+#: main.c:2807
+#, fuzzy, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr "“-%c�选项需��空字符串�数"
+
+#: main.c:2871
+#, fuzzy, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr "“-%c�选项需�正整数�数"
+
+#: main.c:3269
+#, fuzzy, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+"\n"
+"%s该程�为 %s 编译\n"
+
+#: main.c:3271
+#, fuzzy, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+"\n"
+"%s该程�为 %s (%s) 编译\n"
+
+#: main.c:3282
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3303
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+"\n"
+"# make 数�基础，打�在 %s"
+
+#: main.c:3313
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+"\n"
+"# 在 %s 上完� make 数�基础\n"
+
+#: misc.c:201
+#, c-format
+msgid "Unknown error %d"
+msgstr "未知错误 %d"
+
+#: misc.c:522
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr "%s: 用户 %lu (真实用户 %lu), 组 %lu (真实组 %lu)\n"
+
+#: misc.c:543
+msgid "Initialized access"
+msgstr "�始化�功"
+
+#: misc.c:622
+msgid "User access"
+msgstr "用户��"
+
+#: misc.c:670
+msgid "Make access"
+msgstr "Make ��"
+
+#: misc.c:704
+msgid "Child access"
+msgstr "�进程 ��"
+
+#: output.c:104
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr "%s: 进入一个未知的目录\n"
+
+#: output.c:106
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr "%s: 离开一个未知的目录\n"
+
+#: output.c:109
+#, fuzzy, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr "%s: 进入目录“%s�\n"
+
+#: output.c:111
+#, fuzzy, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr "%s: 离开目录“%s�\n"
+
+#: output.c:115
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr "%s[%u]: 进入一个未知的目录\n"
+
+#: output.c:117
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr "%s[%u]: 离开一个未知的目录\n"
+
+#: output.c:120
+#, fuzzy, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr "%s[%u]: 进入目录“%s�\n"
+
+#: output.c:122
+#, fuzzy, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr "%s[%u]: 离开目录“%s�\n"
+
+#: output.c:495 output.c:497
+#, fuzzy
+msgid "write error: stdout"
+msgstr "写错误: %s"
+
+#: output.c:677
+msgid ".  Stop.\n"
+msgstr "。 �止。\n"
+
+#: output.c:711
+#, c-format
+msgid "%s%s: %s"
+msgstr "%s%s: %s"
+
+#: output.c:720
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: read.c:180
+msgid "Reading makefiles...\n"
+msgstr "正在读入 makefiles...\n"
+
+#: read.c:335
+#, fuzzy, c-format
+msgid "Reading makefile '%s'"
+msgstr "正在读入 makefile “%s�"
+
+#: read.c:337
+#, c-format
+msgid " (no default goal)"
+msgstr " (没有缺�目标)"
+
+#: read.c:339
+#, c-format
+msgid " (search path)"
+msgstr " (�索路径)"
+
+#: read.c:341
+#, c-format
+msgid " (don't care)"
+msgstr " (�用�)"
+
+#: read.c:343
+#, c-format
+msgid " (no ~ expansion)"
+msgstr " (没有 ~ 扩展)"
+
+#: read.c:656
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:659
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:789
+msgid "invalid syntax in conditional"
+msgstr "�件中�有无效语法"
+
+#: read.c:966
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:992
+#, fuzzy
+msgid "recipe commences before first target"
+msgstr "命令在第一个目标�开始"
+
+#: read.c:1041
+#, fuzzy
+msgid "missing rule before recipe"
+msgstr "命令之���了规则"
+
+#: read.c:1131
+#, fuzzy
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr " (您的��是用 TAB 代替 8 个空格？)"
+
+#: read.c:1133
+#, fuzzy
+msgid "missing separator"
+msgstr "��分隔符 %s"
+
+#: read.c:1270
+msgid "missing target pattern"
+msgstr "无目标匹�"
+
+#: read.c:1272
+msgid "multiple target patterns"
+msgstr "多个目标匹�"
+
+#: read.c:1276
+#, fuzzy, c-format
+msgid "target pattern contains no '%%'"
+msgstr "目标模���有“%%�"
+
+#: read.c:1398
+#, fuzzy
+msgid "missing 'endif'"
+msgstr "��“endif�"
+
+#: read.c:1436 read.c:1481 variable.c:1546
+msgid "empty variable name"
+msgstr "空���"
+
+#: read.c:1471
+#, fuzzy
+msgid "extraneous text after 'define' directive"
+msgstr "“endef�指令��有�该出现的文字"
+
+#: read.c:1496
+#, fuzzy
+msgid "missing 'endef', unterminated 'define'"
+msgstr "��“endef�，未终止的“define�"
+
+#: read.c:1524
+#, fuzzy
+msgid "extraneous text after 'endef' directive"
+msgstr "“endef�指令��有�该出现的文字"
+
+#: read.c:1595
+#, fuzzy, c-format
+msgid "extraneous text after '%s' directive"
+msgstr "在“%s�指令之��有�该出现的文字"
+
+#: read.c:1596
+#, fuzzy, c-format
+msgid "extraneous '%s'"
+msgstr "�该出现的“%s�"
+
+#: read.c:1624
+#, fuzzy
+msgid "only one 'else' per conditional"
+msgstr "�个�件�能有一个“else�"
+
+#: read.c:1899
+msgid "Malformed target-specific variable definition"
+msgstr "畸形的针对目标的标�定义"
+
+#: read.c:1957
+#, fuzzy
+msgid "prerequisites cannot be defined in recipes"
+msgstr "�赖无法在命令脚本中定义"
+
+#: read.c:2015
+msgid "mixed implicit and static pattern rules"
+msgstr "混和的��和��模�规则"
+
+#: read.c:2038
+msgid "mixed implicit and normal rules"
+msgstr "混和的��和普通规则"
+
+#: read.c:2091
+#, fuzzy, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr "目标“%s��匹�目标模�"
+
+#: read.c:2106 read.c:2152
+#, fuzzy, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr "目标文件“%s��有 : 和 :: 两��目"
+
+#: read.c:2112
+#, fuzzy, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr "目标“%s�在�一个规则中给出了多次。"
+
+#: read.c:2122
+#, fuzzy, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr "警告：覆盖关于目标“%s�的命令"
+
+#: read.c:2125
+#, fuzzy, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr "警告：忽略关于目标“%s�的旧命令"
+
+#: read.c:2229
+#, fuzzy
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr "混和的��和普通规则"
+
+#: read.c:2539
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr "警告：�到了 NUL 字符；忽略行的剩余部分"
+
+#: remake.c:230
+#, fuzzy, c-format
+msgid "Nothing to be done for '%s'."
+msgstr "对“%s�无需�任何事。"
+
+#: remake.c:231
+#, fuzzy, c-format
+msgid "'%s' is up to date."
+msgstr "“%s�是最新的。"
+
+#: remake.c:303
+#, fuzzy, c-format
+msgid "Pruning file '%s'.\n"
+msgstr "正在删除文件“%s�。\n"
+
+#: remake.c:390 remake.c:393
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr "%1$s没有规则�以创建“%3$s�%4$s需�的目标“%2$s�"
+
+#: remake.c:402 remake.c:405
+#, fuzzy, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr "%s没有规则�以创建目标“%s�%s"
+
+#: remake.c:426
+#, fuzzy, c-format
+msgid "Considering target file '%s'.\n"
+msgstr "正在考虑目标文件“%s�。\n"
+
+#: remake.c:433
+#, fuzzy, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr "最近已�试过更新文件“%s�并失败。\n"
+
+#: remake.c:445
+#, fuzzy, c-format
+msgid "File '%s' was considered already.\n"
+msgstr "已考虑过文件“%s�。\n"
+
+#: remake.c:455
+#, fuzzy, c-format
+msgid "Still updating file '%s'.\n"
+msgstr "�然在更新文件“%s�。\n"
+
+#: remake.c:458
+#, fuzzy, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr "更新文件“%s�完�。\n"
+
+#: remake.c:487
+#, fuzzy, c-format
+msgid "File '%s' does not exist.\n"
+msgstr "文件“%s��存在。\n"
+
+#: remake.c:495
+#, fuzzy, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr "*** 警告: .LOW_RESOLUTION_TIME 文件 `%s' 有一个精细的时间标志"
+
+#: remake.c:508 remake.c:1040
+#, fuzzy, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr "找到一�关于“%s�的��规则。\n"
+
+#: remake.c:510 remake.c:1042
+#, fuzzy, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr "找�到关于“%s�的��规则。\n"
+
+#: remake.c:516
+#, fuzzy, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr "使用关于“%s�的默认命令。\n"
+
+#: remake.c:550 remake.c:1089
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr "放弃循环�赖 %s <- %s 。"
+
+#: remake.c:675
+#, fuzzy, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr "目标文件“%s�的��已完�。\n"
+
+#: remake.c:681
+#, fuzzy, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr "正在创建“%s�的��。\n"
+
+#: remake.c:695
+#, fuzzy, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr "放弃目标文件“%s�。\n"
+
+#: remake.c:700
+#, fuzzy, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr "由于错误目标“%s�并未�新创建。"
+
+#: remake.c:752
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr "“%s�是目标“%s�的一个仅用于指定执行顺�(order-only)的��。\n"
+
+#: remake.c:757
+#, fuzzy, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr "目标“%2$s�的��“%1$s��存在。\n"
+
+#: remake.c:762
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr "��“%s�比目标“%s�新。\n"
+
+#: remake.c:765
+#, fuzzy, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr "��“%s�比目标“%s�旧。\n"
+
+#: remake.c:783
+#, fuzzy, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr "目标“%s�是�冒�目标并且没有��。\n"
+
+#: remake.c:790
+#, fuzzy, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr "没有关于“%s�的命令，并且实际上改�了的��。\n"
+
+#: remake.c:795
+#, fuzzy, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr "由于 always-make 标志所以 make “%s�。\n"
+
+#: remake.c:803
+#, fuzzy, c-format
+msgid "No need to remake target '%s'"
+msgstr "�需��新创建目标“%s�"
+
+#: remake.c:805
+#, fuzzy, c-format
+msgid "; using VPATH name '%s'"
+msgstr "；使用 VPATH �称“%s�"
+
+#: remake.c:825
+#, fuzzy, c-format
+msgid "Must remake target '%s'.\n"
+msgstr "必须�新创建目标“%s�。\n"
+
+#: remake.c:831
+#, fuzzy, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr "  忽略 VPATH �称 `%s'。\n"
+
+#: remake.c:840
+#, fuzzy, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr "“%s�的命令正在被执行。\n"
+
+#: remake.c:847
+#, fuzzy, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr "�新创建目标文件“%s�失败。\n"
+
+#: remake.c:850
+#, fuzzy, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr "�新创建目标文件“%s��功。\n"
+
+#: remake.c:853
+#, fuzzy, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr "目标文件“%s�需�以 -q 选项�新创建。\n"
+
+#: remake.c:1048
+#, fuzzy, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr "使用关于“%s�的默认命令。\n"
+
+#: remake.c:1397
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time in the future"
+msgstr "警告：文件“%s�的修改时间在未�"
+
+#: remake.c:1411
+#, fuzzy, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr "警告：文件“%s�的修改时间在 %.2g 秒�"
+
+#: remake.c:1610
+#, fuzzy, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ".LIBPATTERNS 的元素“%s��是一个模�"
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr "用户�希望导出：%s\n"
+
+#: rule.c:495
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+"\n"
+"# ��规则。"
+
+#: rule.c:510
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+"\n"
+"# 没有��规则。"
+
+#: rule.c:513
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u"
+msgstr ""
+"\n"
+"# %u ���规则，%u"
+
+#: rule.c:522
+msgid " terminal."
+msgstr " 终端。"
+
+#: rule.c:530
+#, fuzzy, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr "错误：num_pattern_rules 出错�%u != %u"
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr "未知的信�"
+
+#: signame.c:92
+msgid "Hangup"
+msgstr "挂起"
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr "中断"
+
+#: signame.c:98
+msgid "Quit"
+msgstr "退出"
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr "�法指令"
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr "跟踪/断点陷阱"
+
+#: signame.c:109
+msgid "Aborted"
+msgstr "已失败"
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr "IOT 陷阱"
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr "EMT 陷阱"
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr "浮点数异常"
+
+#: signame.c:121
+msgid "Killed"
+msgstr "已�死"
+
+#: signame.c:124
+msgid "Bus error"
+msgstr "总线错误"
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr "段错误"
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr "错误的系统调用"
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr "断开的管�"
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr "闹钟"
+
+#: signame.c:139
+msgid "Terminated"
+msgstr "已终止"
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr "用户定义信� 1"
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr "用户定义信� 2"
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr "�进程已退出"
+
+#: signame.c:156
+msgid "Power failure"
+msgstr "电�失效"
+
+#: signame.c:159
+msgid "Stopped"
+msgstr "已�止"
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr "已�止 (tty 输入)"
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr "已�止 (tty 输出)"
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr "已�止 (信�)"
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr "CPU 时间超出�制"
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr "文件大�超出�制"
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr "虚拟时钟超时"
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr "测试时钟超市"
+
+#: signame.c:186
+msgid "Window changed"
+msgstr "窗�已改�"
+
+#: signame.c:189
+msgid "Continued"
+msgstr "继续"
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr "紧急 I/O �件"
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr "I/O �行"
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr "SIGWIND"
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr "SIGPHONE"
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr "资�丢失"
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr "�险信�"
+
+#: signame.c:217
+msgid "Information request"
+msgstr "信�请求"
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr "浮点数�处�器��用"
+
+#: strcache.c:236
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr "%s strcache 缓冲区数�: %d\n"
+
+#: strcache.c:266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr "%s strcache 剩余: 总共 = %d / 最大 = %d / 最� = %d / 平� = %d\n"
+
+#: strcache.c:270
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:280
+#, fuzzy, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr "%s strcache 大�: 总共 = %d / 最大 = %d / 最� = %d / 平� = %d\n"
+
+#: strcache.c:283
+#, fuzzy, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr "%s strcache 剩余: 总共 = %d / 最大 = %d / 最� = %d / 平� = %d\n"
+
+#: strcache.c:287
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:289
+#, fuzzy
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+"\n"
+"# 文件�凑表状�:\n"
+"# "
+
+#: variable.c:1599
+msgid "automatic"
+msgstr "自动"
+
+#: variable.c:1602
+msgid "default"
+msgstr "默认"
+
+#: variable.c:1605
+msgid "environment"
+msgstr "环境"
+
+#: variable.c:1608
+msgid "makefile"
+msgstr "makefile"
+
+#: variable.c:1611
+msgid "environment under -e"
+msgstr "-e 指定的环境��"
+
+#: variable.c:1614
+msgid "command line"
+msgstr "命令行"
+
+#: variable.c:1617
+#, fuzzy
+msgid "'override' directive"
+msgstr "“override�指令"
+
+#: variable.c:1628
+#, fuzzy, c-format
+msgid " (from '%s', line %lu)"
+msgstr " (从“%s�，行 %lu)"
+
+#: variable.c:1691
+msgid "# variable set hash-table stats:\n"
+msgstr "# ��的�凑表状�:\n"
+
+#: variable.c:1702
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+"\n"
+"# ��\n"
+
+#: variable.c:1706
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+"\n"
+"# Pattern-specific ��值"
+
+#: variable.c:1720
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+"\n"
+"# 没有 pattern-specific ��的值。"
+
+#: variable.c:1722
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+"\n"
+"# %u 个 pattern-specific ��的值"
+
+#: variable.h:224
+#, fuzzy, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr "警告：未定义的��“%.*s�"
+
+#: vmsfunctions.c:91
+#, fuzzy, c-format
+msgid "sys$search() failed with %d\n"
+msgstr "sys$search 失败并返回 %d\n"
+
+#: vmsjobs.c:72
+#, c-format
+msgid "Warning: Empty redirection\n"
+msgstr "警告：空的�定�\n"
+
+#: vmsjobs.c:183
+#, fuzzy, c-format
+msgid "internal error: '%s' command_state"
+msgstr "内部错误：“%s� command_state"
+
+#: vmsjobs.c:290
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr "-警告, 你�能必须从 DCL �新�用 CTRL-Y。\n"
+
+#: vmsjobs.c:455 vmsjobs.c:559
+#, c-format
+msgid "BUILTIN [%s][%s]\n"
+msgstr "BUILTIN [%s][%s]\n"
+
+#: vmsjobs.c:465
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:501
+#, fuzzy, c-format
+msgid "BUILTIN ECHO %s->%s\n"
+msgstr "BUILTIN CD %s\n"
+
+#: vmsjobs.c:505
+#, c-format
+msgid "Unknown builtin command '%s'\n"
+msgstr "未知的内置命令“%s�\n"
+
+#: vmsjobs.c:592
+#, c-format
+msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
+msgstr ""
+
+#: vmsjobs.c:643
+#, c-format
+msgid "Error, empty command\n"
+msgstr "错误，空命令\n"
+
+#: vmsjobs.c:674
+#, c-format
+msgid "Redirected input from %s\n"
+msgstr "�自 %s 的�定�输入\n"
+
+#: vmsjobs.c:681
+#, c-format
+msgid "Redirected error to %s\n"
+msgstr "到 %s 的�定�错误输出\n"
+
+#: vmsjobs.c:690
+#, fuzzy, c-format
+msgid "Append output to %s\n"
+msgstr "到 %s 的�定�输出\n"
+
+#: vmsjobs.c:696
+#, c-format
+msgid "Redirected output to %s\n"
+msgstr "到 %s 的�定�输出\n"
+
+#: vmsjobs.c:802
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:809
+#, c-format
+msgid "Executing %s instead\n"
+msgstr "执行 %s 作为替代\n"
+
+#: vmsjobs.c:915
+#, c-format
+msgid "Error spawning, %d\n"
+msgstr "错误产生，%d\n"
+
+#: vpath.c:583
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+"\n"
+"# VPATH �索路径\n"
+
+#: vpath.c:600
+#, fuzzy
+msgid "# No 'vpath' search paths."
+msgstr "# 没有“vpath��索路径。"
+
+#: vpath.c:602
+#, fuzzy, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+"\n"
+"# %u “vpath��索路径。\n"
+
+#: vpath.c:605
+#, fuzzy
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+"\n"
+"# 没有通用�索路径(“VPATH���)。"
+
+#: vpath.c:611
+#, fuzzy
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+"\n"
+"# 通用�索路径(“VPATH���)：\n"
+"# "
+
+#, fuzzy
+#~ msgid "#  Invalid value in 'update_status' member!"
+#~ msgstr "#  “update_status��员中无效的值�"
+
+#, fuzzy
+#~ msgid "unknown trace mode '%s'"
+#~ msgstr "未知的内置命令“%s�\n"
+
+#, fuzzy
+#~ msgid "internal error: multiple --sync-mutex options"
+#~ msgstr "内部错误：多个 --jobserver-fds 选项"
+
+#~ msgid "internal error: multiple --jobserver-fds options"
+#~ msgstr "内部错误：多个 --jobserver-fds 选项"
+
+#~ msgid "virtual memory exhausted"
+#~ msgstr "虚拟内存耗尽"
+
+#~ msgid "write error"
+#~ msgstr "写错误"
+
+#~ msgid "BUILTIN RM %s\n"
+#~ msgstr "BUILTIN RM %s\n"
+
+#~ msgid "*** [%s] Error 0x%x (ignored)"
+#~ msgstr "*** [%s] 错误 0x%x (忽略)"
+
+#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
+#~ msgstr "process_easy() �动进程失败 (e=%ld)\n"
+
+#~ msgid ""
+#~ "%sThis is free software; see the source for copying conditions.\n"
+#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
+#~ "%sPARTICULAR PURPOSE.\n"
+#~ msgstr ""
+#~ "%s该程�为自由软件，详情��阅版��款。在法律�许的范围内\n"
+#~ "%s我们�作任何担�，这包�但��于任何商业适售性以�针对特\n"
+#~ "%s定目的的适用性的担�。\n"
+
+#~ msgid "extraneous `endef'"
+#~ msgstr "多于的“endef�"
+
+#~ msgid "empty `override' directive"
+#~ msgstr "空“override�指令"
+
+#~ msgid "invalid `override' directive"
+#~ msgstr "无效的“override�指令"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s # of strings in strcache: %d\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%s strcache 中的字符串数�: %d\n"
+
+#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
+#~ msgstr "-警告, CTRL-Y 将利刀�进程环境。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "# No files."
+#~ msgstr ""
+#~ "\n"
+#~ "# 无文件。"
+
+#~ msgid ""
+#~ "\n"
+#~ "# %u files in %u hash buckets.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "# 有 %u 个文件存储在 %u 个�凑�元中。\n"
+
+#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
+#~ msgstr "# �个�元平��有 %.3f 个文件，一个�元最多�有 %u 个文件。\n"
+
+#~ msgid "Syntax error, still inside '\"'\n"
+#~ msgstr "语法错误，�然在“\"�之中\n"
+
+#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
+#~ msgstr "收到 SIGCHLD 信�；尚有 %u 个�进程存在。\n"
+
+#~ msgid "DIRECTORY"
+#~ msgstr "DIRECTORY"
+
+#~ msgid "Change to DIRECTORY before doing anything"
+#~ msgstr "在�任何事之�转移到 DIRECTORY 中"
+
+#~ msgid "FLAGS"
+#~ msgstr "标志"
+
+#~ msgid "Suspend process to allow a debugger to attach"
+#~ msgstr "挂起进程以便调试器进行连接"
+
+#~ msgid "Environment variables override makefiles"
+#~ msgstr "环境��覆盖 makefile"
+
+#~ msgid "FILE"
+#~ msgstr "FILE"
+
+#~ msgid "Read FILE as a makefile"
+#~ msgstr "将 FILE 作为 makefile 读入"
+
+#~ msgid "Search DIRECTORY for included makefiles"
+#~ msgstr "在 DIRECTORY 中�索引入的 makefile"
+
+#~ msgid "Don't start multiple jobs unless load is below N"
+#~ msgstr "除�负载低于 N �则就��动多个任务"
+
+#~ msgid "Don't actually run any commands; just print them"
+#~ msgstr "�会实际�行任何命令；�是打�它们"
+
+#~ msgid "Consider FILE to be very old and don't remake it"
+#~ msgstr "将 FILE 认定为过于陈旧而��现创建它"
+
+#~ msgid "Don't echo commands"
+#~ msgstr "��回显命令"
+
+#~ msgid "Turns off -k"
+#~ msgstr "关闭 -k"
+
+#~ msgid "Consider FILE to be infinitely new"
+#~ msgstr "将 FILE 看�无�新"
+
+#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
+#~ msgstr "如果 sh.exe ��用，就��给出 -j 或 --jobs。"
+
+#~ msgid "Resetting make for single job mode."
+#~ msgstr "将 make �置为�任务模�。"
+
+#~ msgid "Entering"
+#~ msgstr "正在进入"
+
+#~ msgid "Leaving"
+#~ msgstr "正在离开"
+
+#~ msgid "no file name for `%sinclude'"
+#~ msgstr "“%sinclude� 没有文件�"
+
+#~ msgid "# No variables."
+#~ msgstr "# 没有��。"
+
+#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# �个�凑�元平�存储 %.1f 个��，一个�元最多存储 %u 个。\n"
+
+#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
+#~ msgstr "# �个�凑�元平�存储 %d.%d 个��，一个�元最多存储 %u 个。\n"
diff --git a/read.c b/read.c
new file mode 100644
index 0000000..6ff4bcc
--- /dev/null
+++ b/read.c
@@ -0,0 +1,3354 @@
+/* Reading and parsing of makefiles for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include <glob.h>
+
+#include "filedef.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+#include "variable.h"
+#include "rule.h"
+#include "debug.h"
+#include "hash.h"
+
+
+#ifdef WINDOWS32
+#include <windows.h>
+#include "sub_proc.h"
+#else  /* !WINDOWS32 */
+#ifndef _AMIGA
+#ifndef VMS
+#include <pwd.h>
+#else
+struct passwd *getpwnam (char *name);
+#endif
+#endif
+#endif /* !WINDOWS32 */
+
+/* A 'struct ebuffer' controls the origin of the makefile we are currently
+   eval'ing.
+*/
+
+struct ebuffer
+  {
+    char *buffer;       /* Start of the current line in the buffer.  */
+    char *bufnext;      /* Start of the next line in the buffer.  */
+    char *bufstart;     /* Start of the entire buffer.  */
+    unsigned int size;  /* Malloc'd size of buffer. */
+    FILE *fp;           /* File, or NULL if this is an internal buffer.  */
+    gmk_floc floc;   /* Info on the file in fp (if any).  */
+  };
+
+/* Track the modifiers we can have on variable assignments */
+
+struct vmodifiers
+  {
+    unsigned int assign_v:1;
+    unsigned int define_v:1;
+    unsigned int undefine_v:1;
+    unsigned int export_v:1;
+    unsigned int override_v:1;
+    unsigned int private_v:1;
+  };
+
+/* Types of "words" that can be read in a makefile.  */
+enum make_word_type
+  {
+     w_bogus, w_eol, w_static, w_variable, w_colon, w_dcolon, w_semicolon,
+     w_varassign
+  };
+
+
+/* A 'struct conditionals' contains the information describing
+   all the active conditionals in a makefile.
+
+   The global variable 'conditionals' contains the conditionals
+   information for the current makefile.  It is initialized from
+   the static structure 'toplevel_conditionals' and is later changed
+   to new structures for included makefiles.  */
+
+struct conditionals
+  {
+    unsigned int if_cmds;       /* Depth of conditional nesting.  */
+    unsigned int allocated;     /* Elts allocated in following arrays.  */
+    char *ignoring;             /* Are we ignoring or interpreting?
+                                   0=interpreting, 1=not yet interpreted,
+                                   2=already interpreted */
+    char *seen_else;            /* Have we already seen an 'else'?  */
+  };
+
+static struct conditionals toplevel_conditionals;
+static struct conditionals *conditionals = &toplevel_conditionals;
+
+
+/* Default directories to search for include files in  */
+
+static const char *default_include_directories[] =
+  {
+#if defined(WINDOWS32) && !defined(INCLUDEDIR)
+/* This completely up to the user when they install MSVC or other packages.
+   This is defined as a placeholder.  */
+# define INCLUDEDIR "."
+#endif
+    INCLUDEDIR,
+#ifndef _AMIGA
+    "/usr/gnu/include",
+    "/usr/local/include",
+    "/usr/include",
+#endif
+    0
+  };
+
+/* List of directories to search for include files in  */
+
+static const char **include_directories;
+
+/* Maximum length of an element of the above.  */
+
+static unsigned int max_incl_len;
+
+/* The filename and pointer to line number of the
+   makefile currently being read in.  */
+
+const gmk_floc *reading_file = 0;
+
+/* The chain of files read by read_all_makefiles.  */
+
+static struct dep *read_files = 0;
+
+static int eval_makefile (const char *filename, int flags);
+static void eval (struct ebuffer *buffer, int flags);
+
+static long readline (struct ebuffer *ebuf);
+static void do_undefine (char *name, enum variable_origin origin,
+                         struct ebuffer *ebuf);
+static struct variable *do_define (char *name, enum variable_origin origin,
+                                   struct ebuffer *ebuf);
+static int conditional_line (char *line, int len, const gmk_floc *flocp);
+static void record_files (struct nameseq *filenames, const char *pattern,
+                          const char *pattern_percent, char *depstr,
+                          unsigned int cmds_started, char *commands,
+                          unsigned int commands_idx, int two_colon,
+                          char prefix, const gmk_floc *flocp);
+static void record_target_var (struct nameseq *filenames, char *defn,
+                               enum variable_origin origin,
+                               struct vmodifiers *vmod,
+                               const gmk_floc *flocp);
+static enum make_word_type get_next_mword (char *buffer, char *delim,
+                                           char **startp, unsigned int *length);
+static void remove_comments (char *line);
+static char *find_char_unquote (char *string, int map);
+static char *unescape_char (char *string, int c);
+
+
+/* Compare a word, both length and contents.
+   P must point to the word to be tested, and WLEN must be the length.
+*/
+#define word1eq(s)      (wlen == CSTRLEN (s) && strneq (s, p, CSTRLEN (s)))
+
+
+/* Read in all the makefiles and return a chain of targets to rebuild.  */
+
+struct dep *
+read_all_makefiles (const char **makefiles)
+{
+  unsigned int num_makefiles = 0;
+
+  /* Create *_LIST variables, to hold the makefiles, targets, and variables
+     we will be reading. */
+
+  define_variable_cname ("MAKEFILE_LIST", "", o_file, 0);
+
+  DB (DB_BASIC, (_("Reading makefiles...\n")));
+
+  /* If there's a non-null variable MAKEFILES, its value is a list of
+     files to read first thing.  But don't let it prevent reading the
+     default makefiles and don't let the default goal come from there.  */
+
+  {
+    char *value;
+    char *name, *p;
+    unsigned int length;
+
+    {
+      /* Turn off --warn-undefined-variables while we expand MAKEFILES.  */
+      int save = warn_undefined_variables_flag;
+      warn_undefined_variables_flag = 0;
+
+      value = allocated_variable_expand ("$(MAKEFILES)");
+
+      warn_undefined_variables_flag = save;
+    }
+
+    /* Set NAME to the start of next token and LENGTH to its length.
+       MAKEFILES is updated for finding remaining tokens.  */
+    p = value;
+
+    while ((name = find_next_token ((const char **)&p, &length)) != 0)
+      {
+        if (*p != '\0')
+          *p++ = '\0';
+        eval_makefile (name, RM_NO_DEFAULT_GOAL|RM_INCLUDED|RM_DONTCARE);
+      }
+
+    free (value);
+  }
+
+  /* Read makefiles specified with -f switches.  */
+
+  if (makefiles != 0)
+    while (*makefiles != 0)
+      {
+        struct dep *tail = read_files;
+        struct dep *d;
+
+        if (! eval_makefile (*makefiles, 0))
+          perror_with_name ("", *makefiles);
+
+        /* Find the first element eval_makefile() added to read_files.  */
+        d = read_files;
+        while (d->next != tail)
+          d = d->next;
+
+        /* Reuse the storage allocated for the read_file.  */
+        *makefiles = dep_name (d);
+        ++num_makefiles;
+        ++makefiles;
+      }
+
+  /* If there were no -f switches, try the default names.  */
+
+  if (num_makefiles == 0)
+    {
+      static const char *default_makefiles[] =
+#ifdef VMS
+        /* all lower case since readdir() (the vms version) 'lowercasifies' */
+        { "makefile.vms", "gnumakefile.", "makefile.", 0 };
+#else
+#ifdef _AMIGA
+        { "GNUmakefile", "Makefile", "SMakefile", 0 };
+#else /* !Amiga && !VMS */
+#ifdef WINDOWS32
+        { "GNUmakefile", "makefile", "Makefile", "makefile.mak", 0 };
+#else /* !Amiga && !VMS && !WINDOWS32 */
+        { "GNUmakefile", "makefile", "Makefile", 0 };
+#endif /* !Amiga && !VMS && !WINDOWS32 */
+#endif /* AMIGA */
+#endif /* VMS */
+      const char **p = default_makefiles;
+      while (*p != 0 && !file_exists_p (*p))
+        ++p;
+
+      if (*p != 0)
+        {
+          if (! eval_makefile (*p, 0))
+            perror_with_name ("", *p);
+        }
+      else
+        {
+          /* No default makefile was found.  Add the default makefiles to the
+             'read_files' chain so they will be updated if possible.  */
+          struct dep *tail = read_files;
+          /* Add them to the tail, after any MAKEFILES variable makefiles.  */
+          while (tail != 0 && tail->next != 0)
+            tail = tail->next;
+          for (p = default_makefiles; *p != 0; ++p)
+            {
+              struct dep *d = alloc_dep ();
+              d->file = enter_file (strcache_add (*p));
+              d->dontcare = 1;
+              /* Tell update_goal_chain to bail out as soon as this file is
+                 made, and main not to die if we can't make this file.  */
+              d->changed = RM_DONTCARE;
+              if (tail == 0)
+                read_files = d;
+              else
+                tail->next = d;
+              tail = d;
+            }
+          if (tail != 0)
+            tail->next = 0;
+        }
+    }
+
+  return read_files;
+}
+
+/* Install a new conditional and return the previous one.  */
+
+static struct conditionals *
+install_conditionals (struct conditionals *new)
+{
+  struct conditionals *save = conditionals;
+
+  memset (new, '\0', sizeof (*new));
+  conditionals = new;
+
+  return save;
+}
+
+/* Free the current conditionals and reinstate a saved one.  */
+
+static void
+restore_conditionals (struct conditionals *saved)
+{
+  /* Free any space allocated by conditional_line.  */
+  free (conditionals->ignoring);
+  free (conditionals->seen_else);
+
+  /* Restore state.  */
+  conditionals = saved;
+}
+
+static int
+eval_makefile (const char *filename, int flags)
+{
+  struct dep *deps;
+  struct ebuffer ebuf;
+  const gmk_floc *curfile;
+  char *expanded = 0;
+  int makefile_errno;
+
+  ebuf.floc.filenm = filename; /* Use the original file name.  */
+  ebuf.floc.lineno = 1;
+
+  if (ISDB (DB_VERBOSE))
+    {
+      printf (_("Reading makefile '%s'"), filename);
+      if (flags & RM_NO_DEFAULT_GOAL)
+        printf (_(" (no default goal)"));
+      if (flags & RM_INCLUDED)
+        printf (_(" (search path)"));
+      if (flags & RM_DONTCARE)
+        printf (_(" (don't care)"));
+      if (flags & RM_NO_TILDE)
+        printf (_(" (no ~ expansion)"));
+      puts ("...");
+    }
+
+  /* First, get a stream to read.  */
+
+  /* Expand ~ in FILENAME unless it came from 'include',
+     in which case it was already done.  */
+  if (!(flags & RM_NO_TILDE) && filename[0] == '~')
+    {
+      expanded = tilde_expand (filename);
+      if (expanded != 0)
+        filename = expanded;
+    }
+
+  ENULLLOOP (ebuf.fp, fopen (filename, "r"));
+
+  /* Save the error code so we print the right message later.  */
+  makefile_errno = errno;
+
+  /* Check for unrecoverable errors: out of mem or FILE slots.  */
+  switch (makefile_errno)
+    {
+#ifdef EMFILE
+    case EMFILE:
+#endif
+#ifdef ENFILE
+    case ENFILE:
+#endif
+    case ENOMEM:
+      {
+        const char *err = strerror (makefile_errno);
+        OS (fatal, reading_file, "%s", err);
+      }
+    }
+
+  /* If the makefile wasn't found and it's either a makefile from
+     the 'MAKEFILES' variable or an included makefile,
+     search the included makefile search path for this makefile.  */
+  if (ebuf.fp == 0 && (flags & RM_INCLUDED) && *filename != '/')
+    {
+      unsigned int i;
+      for (i = 0; include_directories[i] != 0; ++i)
+        {
+          const char *included = concat (3, include_directories[i],
+                                         "/", filename);
+          ebuf.fp = fopen (included, "r");
+          if (ebuf.fp)
+            {
+              filename = included;
+              break;
+            }
+        }
+    }
+
+  /* Now we have the final name for this makefile. Enter it into
+     the cache.  */
+  filename = strcache_add (filename);
+
+  /* Add FILENAME to the chain of read makefiles.  */
+  deps = alloc_dep ();
+  deps->next = read_files;
+  read_files = deps;
+  deps->file = lookup_file (filename);
+  if (deps->file == 0)
+    deps->file = enter_file (filename);
+  filename = deps->file->name;
+  deps->changed = flags;
+  if (flags & RM_DONTCARE)
+    deps->dontcare = 1;
+
+  free (expanded);
+
+  /* If the makefile can't be found at all, give up entirely.  */
+
+  if (ebuf.fp == 0)
+    {
+      /* If we did some searching, errno has the error from the last
+         attempt, rather from FILENAME itself.  Restore it in case the
+         caller wants to use it in a message.  */
+      errno = makefile_errno;
+      return 0;
+    }
+
+  /* Set close-on-exec to avoid leaking the makefile to children, such as
+     $(shell ...).  */
+#ifdef HAVE_FILENO
+  CLOSE_ON_EXEC (fileno (ebuf.fp));
+#endif
+
+  /* Add this makefile to the list. */
+  do_variable_definition (&ebuf.floc, "MAKEFILE_LIST", filename, o_file,
+                          f_append, 0);
+
+  /* Evaluate the makefile */
+
+  ebuf.size = 200;
+  ebuf.buffer = ebuf.bufnext = ebuf.bufstart = xmalloc (ebuf.size);
+
+  curfile = reading_file;
+  reading_file = &ebuf.floc;
+
+  eval (&ebuf, !(flags & RM_NO_DEFAULT_GOAL));
+
+  reading_file = curfile;
+
+  fclose (ebuf.fp);
+
+  free (ebuf.bufstart);
+  alloca (0);
+
+  return 1;
+}
+
+void
+eval_buffer (char *buffer, const gmk_floc *floc)
+{
+  struct ebuffer ebuf;
+  struct conditionals *saved;
+  struct conditionals new;
+  const gmk_floc *curfile;
+
+  /* Evaluate the buffer */
+
+  ebuf.size = strlen (buffer);
+  ebuf.buffer = ebuf.bufnext = ebuf.bufstart = buffer;
+  ebuf.fp = NULL;
+
+  if (floc)
+    ebuf.floc = *floc;
+  else if (reading_file)
+    ebuf.floc = *reading_file;
+  else
+    {
+      ebuf.floc.filenm = NULL;
+      ebuf.floc.lineno = 1;
+    }
+
+  curfile = reading_file;
+  reading_file = &ebuf.floc;
+
+  saved = install_conditionals (&new);
+
+  eval (&ebuf, 1);
+
+  restore_conditionals (saved);
+
+  reading_file = curfile;
+
+  alloca (0);
+}
+
+/* Check LINE to see if it's a variable assignment or undefine.
+
+   It might use one of the modifiers "export", "override", "private", or it
+   might be one of the conditional tokens like "ifdef", "include", etc.
+
+   If it's not a variable assignment or undefine, VMOD.V_ASSIGN is 0.
+   Returns LINE.
+
+   Returns a pointer to the first non-modifier character, and sets VMOD
+   based on the modifiers found if any, plus V_ASSIGN is 1.
+ */
+static char *
+parse_var_assignment (const char *line, struct vmodifiers *vmod)
+{
+  const char *p;
+  memset (vmod, '\0', sizeof (*vmod));
+
+  /* Find the start of the next token.  If there isn't one we're done.  */
+  line = next_token (line);
+  if (*line == '\0')
+    return (char *)line;
+
+  p = line;
+  while (1)
+    {
+      int wlen;
+      const char *p2;
+      struct variable v;
+
+      p2 = parse_variable_definition (p, &v);
+
+      /* If this is a variable assignment, we're done.  */
+      if (p2)
+        break;
+
+      /* It's not a variable; see if it's a modifier.  */
+      p2 = end_of_token (p);
+      wlen = p2 - p;
+
+      if (word1eq ("export"))
+        vmod->export_v = 1;
+      else if (word1eq ("override"))
+        vmod->override_v = 1;
+      else if (word1eq ("private"))
+        vmod->private_v = 1;
+      else if (word1eq ("define"))
+        {
+          /* We can't have modifiers after 'define' */
+          vmod->define_v = 1;
+          p = next_token (p2);
+          break;
+        }
+      else if (word1eq ("undefine"))
+        {
+          /* We can't have modifiers after 'undefine' */
+          vmod->undefine_v = 1;
+          p = next_token (p2);
+          break;
+        }
+      else
+        /* Not a variable or modifier: this is not a variable assignment.  */
+        return (char *)line;
+
+      /* It was a modifier.  Try the next word.  */
+      p = next_token (p2);
+      if (*p == '\0')
+        return (char *)line;
+    }
+
+  /* Found a variable assignment or undefine.  */
+  vmod->assign_v = 1;
+  return (char *)p;
+}
+
+
+/* Read file FILENAME as a makefile and add its contents to the data base.
+
+   SET_DEFAULT is true if we are allowed to set the default goal.  */
+
+static void
+eval (struct ebuffer *ebuf, int set_default)
+{
+  char *collapsed = 0;
+  unsigned int collapsed_length = 0;
+  unsigned int commands_len = 200;
+  char *commands;
+  unsigned int commands_idx = 0;
+  unsigned int cmds_started, tgts_started;
+  int ignoring = 0, in_ignored_define = 0;
+  int no_targets = 0;           /* Set when reading a rule without targets.  */
+  struct nameseq *filenames = 0;
+  char *depstr = 0;
+  long nlines = 0;
+  int two_colon = 0;
+  char prefix = cmd_prefix;
+  const char *pattern = 0;
+  const char *pattern_percent;
+  gmk_floc *fstart;
+  gmk_floc fi;
+
+#define record_waiting_files()                                                \
+  do                                                                          \
+    {                                                                         \
+      if (filenames != 0)                                                     \
+        {                                                                     \
+          fi.lineno = tgts_started;                                           \
+          record_files (filenames, pattern, pattern_percent, depstr,          \
+                        cmds_started, commands, commands_idx, two_colon,      \
+                        prefix, &fi);                                         \
+          filenames = 0;                                                      \
+        }                                                                     \
+      commands_idx = 0;                                                       \
+      no_targets = 0;                                                         \
+      pattern = 0;                                                            \
+    } while (0)
+
+  pattern_percent = 0;
+  cmds_started = tgts_started = 1;
+
+  fstart = &ebuf->floc;
+  fi.filenm = ebuf->floc.filenm;
+
+  /* Loop over lines in the file.
+     The strategy is to accumulate target names in FILENAMES, dependencies
+     in DEPS and commands in COMMANDS.  These are used to define a rule
+     when the start of the next rule (or eof) is encountered.
+
+     When you see a "continue" in the loop below, that means we are moving on
+     to the next line.  If you see record_waiting_files(), then the statement
+     we are parsing also finishes the previous rule.  */
+
+  commands = xmalloc (200);
+
+  while (1)
+    {
+      unsigned int linelen;
+      char *line;
+      unsigned int wlen;
+      char *p;
+      char *p2;
+      struct vmodifiers vmod;
+
+      /* At the top of this loop, we are starting a brand new line.  */
+      /* Grab the next line to be evaluated */
+      ebuf->floc.lineno += nlines;
+      nlines = readline (ebuf);
+
+      /* If there is nothing left to eval, we're done.  */
+      if (nlines < 0)
+        break;
+
+      line = ebuf->buffer;
+
+      /* If this is the first line, check for a UTF-8 BOM and skip it.  */
+      if (ebuf->floc.lineno == 1 && line[0] == (char)0xEF
+          && line[1] == (char)0xBB && line[2] == (char)0xBF)
+        {
+          line += 3;
+          if (ISDB(DB_BASIC))
+            {
+              if (ebuf->floc.filenm)
+                printf (_("Skipping UTF-8 BOM in makefile '%s'\n"),
+                        ebuf->floc.filenm);
+              else
+                printf (_("Skipping UTF-8 BOM in makefile buffer\n"));
+            }
+        }
+
+      /* If this line is empty, skip it.  */
+      if (line[0] == '\0')
+        continue;
+
+      linelen = strlen (line);
+
+      /* Check for a shell command line first.
+         If it is not one, we can stop treating cmd_prefix specially.  */
+      if (line[0] == cmd_prefix)
+        {
+          if (no_targets)
+            /* Ignore the commands in a rule with no targets.  */
+            continue;
+
+          /* If there is no preceding rule line, don't treat this line
+             as a command, even though it begins with a recipe prefix.
+             SunOS 4 make appears to behave this way.  */
+
+          if (filenames != 0)
+            {
+              if (ignoring)
+                /* Yep, this is a shell command, and we don't care.  */
+                continue;
+
+              if (commands_idx == 0)
+                cmds_started = ebuf->floc.lineno;
+
+              /* Append this command line to the line being accumulated.
+                 Skip the initial command prefix character.  */
+              if (linelen + commands_idx > commands_len)
+                {
+                  commands_len = (linelen + commands_idx) * 2;
+                  commands = xrealloc (commands, commands_len);
+                }
+              memcpy (&commands[commands_idx], line + 1, linelen - 1);
+              commands_idx += linelen - 1;
+              commands[commands_idx++] = '\n';
+              continue;
+            }
+        }
+
+      /* This line is not a shell command line.  Don't worry about whitespace.
+         Get more space if we need it; we don't need to preserve the current
+         contents of the buffer.  */
+
+      if (collapsed_length < linelen+1)
+        {
+          collapsed_length = linelen+1;
+          free (collapsed);
+          /* Don't need xrealloc: we don't need to preserve the content.  */
+          collapsed = xmalloc (collapsed_length);
+        }
+      strcpy (collapsed, line);
+      /* Collapse continuation lines.  */
+      collapse_continuations (collapsed);
+      remove_comments (collapsed);
+
+      /* Get rid if starting space (including formfeed, vtab, etc.)  */
+      p = collapsed;
+      while (isspace ((unsigned char)*p))
+        ++p;
+
+      /* See if this is a variable assignment.  We need to do this early, to
+         allow variables with names like 'ifdef', 'export', 'private', etc.  */
+      p = parse_var_assignment (p, &vmod);
+      if (vmod.assign_v)
+        {
+          struct variable *v;
+          enum variable_origin origin = vmod.override_v ? o_override : o_file;
+
+          /* Variable assignment ends the previous rule.  */
+          record_waiting_files ();
+
+          /* If we're ignoring then we're done now.  */
+          if (ignoring)
+            {
+              if (vmod.define_v)
+                in_ignored_define = 1;
+              continue;
+            }
+
+          if (vmod.undefine_v)
+          {
+            do_undefine (p, origin, ebuf);
+            continue;
+          }
+          else if (vmod.define_v)
+            v = do_define (p, origin, ebuf);
+          else
+            v = try_variable_definition (fstart, p, origin, 0);
+
+          assert (v != NULL);
+
+          if (vmod.export_v)
+            v->export = v_export;
+          if (vmod.private_v)
+            v->private_var = 1;
+
+          /* This line has been dealt with.  */
+          continue;
+        }
+
+      /* If this line is completely empty, ignore it.  */
+      if (*p == '\0')
+        continue;
+
+      p2 = end_of_token (p);
+      wlen = p2 - p;
+      p2 = next_token (p2);
+
+      /* If we're in an ignored define, skip this line (but maybe get out).  */
+      if (in_ignored_define)
+        {
+          /* See if this is an endef line (plus optional comment).  */
+          if (word1eq ("endef") && STOP_SET (*p2, MAP_COMMENT|MAP_NUL))
+            in_ignored_define = 0;
+
+          continue;
+        }
+
+      /* Check for conditional state changes.  */
+      {
+        int i = conditional_line (p, wlen, fstart);
+        if (i != -2)
+          {
+            if (i == -1)
+              O (fatal, fstart, _("invalid syntax in conditional"));
+
+            ignoring = i;
+            continue;
+          }
+      }
+
+      /* Nothing to see here... move along.  */
+      if (ignoring)
+        continue;
+
+      /* Manage the "export" keyword used outside of variable assignment
+         as well as "unexport".  */
+      if (word1eq ("export") || word1eq ("unexport"))
+        {
+          int exporting = *p == 'u' ? 0 : 1;
+
+          /* Export/unexport ends the previous rule.  */
+          record_waiting_files ();
+
+          /* (un)export by itself causes everything to be (un)exported. */
+          if (*p2 == '\0')
+            export_all_variables = exporting;
+          else
+            {
+              unsigned int l;
+              const char *cp;
+              char *ap;
+
+              /* Expand the line so we can use indirect and constructed
+                 variable names in an (un)export command.  */
+              cp = ap = allocated_variable_expand (p2);
+
+              for (p = find_next_token (&cp, &l); p != 0;
+                   p = find_next_token (&cp, &l))
+                {
+                  struct variable *v = lookup_variable (p, l);
+                  if (v == 0)
+                    v = define_variable_global (p, l, "", o_file, 0, fstart);
+                  v->export = exporting ? v_export : v_noexport;
+                }
+
+              free (ap);
+            }
+          continue;
+        }
+
+      /* Handle the special syntax for vpath.  */
+      if (word1eq ("vpath"))
+        {
+          const char *cp;
+          char *vpat;
+          unsigned int l;
+
+          /* vpath ends the previous rule.  */
+          record_waiting_files ();
+
+          cp = variable_expand (p2);
+          p = find_next_token (&cp, &l);
+          if (p != 0)
+            {
+              vpat = xstrndup (p, l);
+              p = find_next_token (&cp, &l);
+              /* No searchpath means remove all previous
+                 selective VPATH's with the same pattern.  */
+            }
+          else
+            /* No pattern means remove all previous selective VPATH's.  */
+            vpat = 0;
+          construct_vpath_list (vpat, p);
+          free (vpat);
+
+          continue;
+        }
+
+      /* Handle include and variants.  */
+      if (word1eq ("include") || word1eq ("-include") || word1eq ("sinclude"))
+        {
+          /* We have found an 'include' line specifying a nested
+             makefile to be read at this point.  */
+          struct conditionals *save;
+          struct conditionals new_conditionals;
+          struct nameseq *files;
+          /* "-include" (vs "include") says no error if the file does not
+             exist.  "sinclude" is an alias for this from SGI.  */
+          int noerror = (p[0] != 'i');
+
+          /* Include ends the previous rule.  */
+          record_waiting_files ();
+
+          p = allocated_variable_expand (p2);
+
+          /* If no filenames, it's a no-op.  */
+          if (*p == '\0')
+            {
+              free (p);
+              continue;
+            }
+
+          /* Parse the list of file names.  Don't expand archive references!  */
+          p2 = p;
+          files = PARSE_FILE_SEQ (&p2, struct nameseq, MAP_NUL, NULL,
+                                  PARSEFS_NOAR);
+          free (p);
+
+          /* Save the state of conditionals and start
+             the included makefile with a clean slate.  */
+          save = install_conditionals (&new_conditionals);
+
+          /* Record the rules that are waiting so they will determine
+             the default goal before those in the included makefile.  */
+          record_waiting_files ();
+
+          /* Read each included makefile.  */
+          while (files != 0)
+            {
+              struct nameseq *next = files->next;
+              const char *name = files->name;
+              int r;
+
+              free_ns (files);
+              files = next;
+
+              r = eval_makefile (name,
+                                 (RM_INCLUDED | RM_NO_TILDE
+                                  | (noerror ? RM_DONTCARE : 0)
+                                  | (set_default ? 0 : RM_NO_DEFAULT_GOAL)));
+              if (!r && !noerror)
+                {
+                  const char *err = strerror (errno);
+                  OSS (error, fstart, "%s: %s", name, err);
+                }
+            }
+
+          /* Restore conditional state.  */
+          restore_conditionals (save);
+
+          continue;
+        }
+
+      /* Handle the load operations.  */
+      if (word1eq ("load") || word1eq ("-load"))
+        {
+          /* A 'load' line specifies a dynamic object to load.  */
+          struct nameseq *files;
+          int noerror = (p[0] == '-');
+
+          /* Load ends the previous rule.  */
+          record_waiting_files ();
+
+          p = allocated_variable_expand (p2);
+
+          /* If no filenames, it's a no-op.  */
+          if (*p == '\0')
+            {
+              free (p);
+              continue;
+            }
+
+          /* Parse the list of file names.
+             Don't expand archive references or strip "./"  */
+          p2 = p;
+          files = PARSE_FILE_SEQ (&p2, struct nameseq, MAP_NUL, NULL,
+                                  PARSEFS_NOAR);
+          free (p);
+
+          /* Load each file.  */
+          while (files != 0)
+            {
+              struct nameseq *next = files->next;
+              const char *name = files->name;
+              struct dep *deps;
+              int r;
+
+              /* Load the file.  0 means failure.  */
+              r = load_file (&ebuf->floc, &name, noerror);
+              if (! r && ! noerror)
+                OS (fatal, &ebuf->floc, _("%s: failed to load"), name);
+
+              free_ns (files);
+              files = next;
+
+              /* Return of -1 means a special load: don't rebuild it.  */
+              if (r == -1)
+                continue;
+
+              /* It succeeded, so add it to the list "to be rebuilt".  */
+              deps = alloc_dep ();
+              deps->next = read_files;
+              read_files = deps;
+              deps->file = lookup_file (name);
+              if (deps->file == 0)
+                deps->file = enter_file (name);
+              deps->file->loaded = 1;
+            }
+
+          continue;
+        }
+
+      /* This line starts with a tab but was not caught above because there
+         was no preceding target, and the line might have been usable as a
+         variable definition.  But now we know it is definitely lossage.  */
+      if (line[0] == cmd_prefix)
+        O (fatal, fstart, _("recipe commences before first target"));
+
+      /* This line describes some target files.  This is complicated by
+         the existence of target-specific variables, because we can't
+         expand the entire line until we know if we have one or not.  So
+         we expand the line word by word until we find the first ':',
+         then check to see if it's a target-specific variable.
+
+         In this algorithm, 'lb_next' will point to the beginning of the
+         unexpanded parts of the input buffer, while 'p2' points to the
+         parts of the expanded buffer we haven't searched yet. */
+
+      {
+        enum make_word_type wtype;
+        char *cmdleft, *semip, *lb_next;
+        unsigned int plen = 0;
+        char *colonp;
+        const char *end, *beg; /* Helpers for whitespace stripping. */
+
+        /* Record the previous rule.  */
+
+        record_waiting_files ();
+        tgts_started = fstart->lineno;
+
+        /* Search the line for an unquoted ; that is not after an
+           unquoted #.  */
+        cmdleft = find_char_unquote (line, MAP_SEMI|MAP_COMMENT|MAP_VARIABLE);
+        if (cmdleft != 0 && *cmdleft == '#')
+          {
+            /* We found a comment before a semicolon.  */
+            *cmdleft = '\0';
+            cmdleft = 0;
+          }
+        else if (cmdleft != 0)
+          /* Found one.  Cut the line short there before expanding it.  */
+          *(cmdleft++) = '\0';
+        semip = cmdleft;
+
+        collapse_continuations (line);
+
+        /* We can't expand the entire line, since if it's a per-target
+           variable we don't want to expand it.  So, walk from the
+           beginning, expanding as we go, and looking for "interesting"
+           chars.  The first word is always expandable.  */
+        wtype = get_next_mword (line, NULL, &lb_next, &wlen);
+        switch (wtype)
+          {
+          case w_eol:
+            if (cmdleft != 0)
+              O (fatal, fstart, _("missing rule before recipe"));
+            /* This line contained something but turned out to be nothing
+               but whitespace (a comment?).  */
+            continue;
+
+          case w_colon:
+          case w_dcolon:
+            /* We accept and ignore rules without targets for
+               compatibility with SunOS 4 make.  */
+            no_targets = 1;
+            continue;
+
+          default:
+            break;
+          }
+
+        p2 = variable_expand_string (NULL, lb_next, wlen);
+
+        while (1)
+          {
+            lb_next += wlen;
+            if (cmdleft == 0)
+              {
+                /* Look for a semicolon in the expanded line.  */
+                cmdleft = find_char_unquote (p2, MAP_SEMI);
+
+                if (cmdleft != 0)
+                  {
+                    unsigned long p2_off = p2 - variable_buffer;
+                    unsigned long cmd_off = cmdleft - variable_buffer;
+                    char *pend = p2 + strlen (p2);
+
+                    /* Append any remnants of lb, then cut the line short
+                       at the semicolon.  */
+                    *cmdleft = '\0';
+
+                    /* One school of thought says that you shouldn't expand
+                       here, but merely copy, since now you're beyond a ";"
+                       and into a command script.  However, the old parser
+                       expanded the whole line, so we continue that for
+                       backwards-compatibility.  Also, it wouldn't be
+                       entirely consistent, since we do an unconditional
+                       expand below once we know we don't have a
+                       target-specific variable. */
+                    (void)variable_expand_string (pend, lb_next, (long)-1);
+                    lb_next += strlen (lb_next);
+                    p2 = variable_buffer + p2_off;
+                    cmdleft = variable_buffer + cmd_off + 1;
+                  }
+              }
+
+            colonp = find_char_unquote (p2, MAP_COLON);
+#ifdef HAVE_DOS_PATHS
+            /* The drive spec brain-damage strikes again...  */
+            /* Note that the only separators of targets in this context
+               are whitespace and a left paren.  If others are possible,
+               they should be added to the string in the call to index.  */
+            while (colonp && (colonp[1] == '/' || colonp[1] == '\\') &&
+                   colonp > p2 && isalpha ((unsigned char)colonp[-1]) &&
+                   (colonp == p2 + 1 || strchr (" \t(", colonp[-2]) != 0))
+              colonp = find_char_unquote (colonp + 1, MAP_COLON);
+#endif
+            if (colonp != 0)
+              break;
+
+            wtype = get_next_mword (lb_next, NULL, &lb_next, &wlen);
+            if (wtype == w_eol)
+              break;
+
+            p2 += strlen (p2);
+            *(p2++) = ' ';
+            p2 = variable_expand_string (p2, lb_next, wlen);
+            /* We don't need to worry about cmdleft here, because if it was
+               found in the variable_buffer the entire buffer has already
+               been expanded... we'll never get here.  */
+          }
+
+        p2 = next_token (variable_buffer);
+
+        /* If the word we're looking at is EOL, see if there's _anything_
+           on the line.  If not, a variable expanded to nothing, so ignore
+           it.  If so, we can't parse this line so punt.  */
+        if (wtype == w_eol)
+          {
+            if (*p2 == '\0')
+              continue;
+
+            /* There's no need to be ivory-tower about this: check for
+               one of the most common bugs found in makefiles...  */
+            if (cmd_prefix == '\t' && strneq (line, "        ", 8))
+              O (fatal, fstart, _("missing separator (did you mean TAB instead of 8 spaces?)"));
+            else
+              O (fatal, fstart, _("missing separator"));
+          }
+
+        /* Make the colon the end-of-string so we know where to stop
+           looking for targets.  Start there again once we're done.  */
+        *colonp = '\0';
+        filenames = PARSE_SIMPLE_SEQ (&p2, struct nameseq);
+        *colonp = ':';
+        p2 = colonp;
+
+        if (!filenames)
+          {
+            /* We accept and ignore rules without targets for
+               compatibility with SunOS 4 make.  */
+            no_targets = 1;
+            continue;
+          }
+        /* This should never be possible; we handled it above.  */
+        assert (*p2 != '\0');
+        ++p2;
+
+        /* Is this a one-colon or two-colon entry?  */
+        two_colon = *p2 == ':';
+        if (two_colon)
+          p2++;
+
+        /* Test to see if it's a target-specific variable.  Copy the rest
+           of the buffer over, possibly temporarily (we'll expand it later
+           if it's not a target-specific variable).  PLEN saves the length
+           of the unparsed section of p2, for later.  */
+        if (*lb_next != '\0')
+          {
+            unsigned int l = p2 - variable_buffer;
+            plen = strlen (p2);
+            variable_buffer_output (p2+plen, lb_next, strlen (lb_next)+1);
+            p2 = variable_buffer + l;
+          }
+
+        p2 = parse_var_assignment (p2, &vmod);
+        if (vmod.assign_v)
+          {
+            /* If there was a semicolon found, add it back, plus anything
+               after it.  */
+            if (semip)
+              {
+                unsigned int l = p2 - variable_buffer;
+                *(--semip) = ';';
+                collapse_continuations (semip);
+                variable_buffer_output (p2 + strlen (p2),
+                                        semip, strlen (semip)+1);
+                p2 = variable_buffer + l;
+              }
+            record_target_var (filenames, p2,
+                               vmod.override_v ? o_override : o_file,
+                               &vmod, fstart);
+            filenames = 0;
+            continue;
+          }
+
+        /* This is a normal target, _not_ a target-specific variable.
+           Unquote any = in the dependency list.  */
+        find_char_unquote (lb_next, MAP_EQUALS);
+
+        /* Remember the command prefix for this target.  */
+        prefix = cmd_prefix;
+
+        /* We have some targets, so don't ignore the following commands.  */
+        no_targets = 0;
+
+        /* Expand the dependencies, etc.  */
+        if (*lb_next != '\0')
+          {
+            unsigned int l = p2 - variable_buffer;
+            (void) variable_expand_string (p2 + plen, lb_next, (long)-1);
+            p2 = variable_buffer + l;
+
+            /* Look for a semicolon in the expanded line.  */
+            if (cmdleft == 0)
+              {
+                cmdleft = find_char_unquote (p2, MAP_SEMI);
+                if (cmdleft != 0)
+                  *(cmdleft++) = '\0';
+              }
+          }
+
+        /* Is this a static pattern rule: 'target: %targ: %dep; ...'?  */
+        p = strchr (p2, ':');
+        while (p != 0 && p[-1] == '\\')
+          {
+            char *q = &p[-1];
+            int backslash = 0;
+            while (*q-- == '\\')
+              backslash = !backslash;
+            if (backslash)
+              p = strchr (p + 1, ':');
+            else
+              break;
+          }
+#ifdef _AMIGA
+        /* Here, the situation is quite complicated. Let's have a look
+           at a couple of targets:
+
+           install: dev:make
+
+           dev:make: make
+
+           dev:make:: xyz
+
+           The rule is that it's only a target, if there are TWO :'s
+           OR a space around the :.
+        */
+        if (p && !(isspace ((unsigned char)p[1]) || !p[1]
+                   || isspace ((unsigned char)p[-1])))
+          p = 0;
+#endif
+#ifdef HAVE_DOS_PATHS
+        {
+          int check_again;
+          do {
+            check_again = 0;
+            /* For DOS-style paths, skip a "C:\..." or a "C:/..." */
+            if (p != 0 && (p[1] == '\\' || p[1] == '/') &&
+                isalpha ((unsigned char)p[-1]) &&
+                (p == p2 + 1 || strchr (" \t:(", p[-2]) != 0)) {
+              p = strchr (p + 1, ':');
+              check_again = 1;
+            }
+          } while (check_again);
+        }
+#endif
+        if (p != 0)
+          {
+            struct nameseq *target;
+            target = PARSE_FILE_SEQ (&p2, struct nameseq, MAP_COLON, NULL,
+                                     PARSEFS_NOGLOB);
+            ++p2;
+            if (target == 0)
+              O (fatal, fstart, _("missing target pattern"));
+            else if (target->next != 0)
+              O (fatal, fstart, _("multiple target patterns"));
+            pattern_percent = find_percent_cached (&target->name);
+            pattern = target->name;
+            if (pattern_percent == 0)
+              O (fatal, fstart, _("target pattern contains no '%%'"));
+            free_ns (target);
+          }
+        else
+          pattern = 0;
+
+        /* Strip leading and trailing whitespaces. */
+        beg = p2;
+        end = beg + strlen (beg) - 1;
+        strip_whitespace (&beg, &end);
+
+        /* Put all the prerequisites here; they'll be parsed later.  */
+        if (beg <= end && *beg != '\0')
+          depstr = xstrndup (beg, end - beg + 1);
+        else
+          depstr = 0;
+
+        commands_idx = 0;
+        if (cmdleft != 0)
+          {
+            /* Semicolon means rest of line is a command.  */
+            unsigned int l = strlen (cmdleft);
+
+            cmds_started = fstart->lineno;
+
+            /* Add this command line to the buffer.  */
+            if (l + 2 > commands_len)
+              {
+                commands_len = (l + 2) * 2;
+                commands = xrealloc (commands, commands_len);
+              }
+            memcpy (commands, cmdleft, l);
+            commands_idx += l;
+            commands[commands_idx++] = '\n';
+          }
+
+        /* Determine if this target should be made default. We used to do
+           this in record_files() but because of the delayed target recording
+           and because preprocessor directives are legal in target's commands
+           it is too late. Consider this fragment for example:
+
+           foo:
+
+           ifeq ($(.DEFAULT_GOAL),foo)
+              ...
+           endif
+
+           Because the target is not recorded until after ifeq directive is
+           evaluated the .DEFAULT_GOAL does not contain foo yet as one
+           would expect. Because of this we have to move the logic here.  */
+
+        if (set_default && default_goal_var->value[0] == '\0')
+          {
+            struct dep *d;
+            struct nameseq *t = filenames;
+
+            for (; t != 0; t = t->next)
+              {
+                int reject = 0;
+                const char *name = t->name;
+
+                /* We have nothing to do if this is an implicit rule. */
+                if (strchr (name, '%') != 0)
+                  break;
+
+                /* See if this target's name does not start with a '.',
+                   unless it contains a slash.  */
+                if (*name == '.' && strchr (name, '/') == 0
+#ifdef HAVE_DOS_PATHS
+                    && strchr (name, '\\') == 0
+#endif
+                    )
+                  continue;
+
+
+                /* If this file is a suffix, don't let it be
+                   the default goal file.  */
+                for (d = suffix_file->deps; d != 0; d = d->next)
+                  {
+                    register struct dep *d2;
+                    if (*dep_name (d) != '.' && streq (name, dep_name (d)))
+                      {
+                        reject = 1;
+                        break;
+                      }
+                    for (d2 = suffix_file->deps; d2 != 0; d2 = d2->next)
+                      {
+                        unsigned int l = strlen (dep_name (d2));
+                        if (!strneq (name, dep_name (d2), l))
+                          continue;
+                        if (streq (name + l, dep_name (d)))
+                          {
+                            reject = 1;
+                            break;
+                          }
+                      }
+
+                    if (reject)
+                      break;
+                  }
+
+                if (!reject)
+                  {
+                    define_variable_global (".DEFAULT_GOAL", 13, t->name,
+                                            o_file, 0, NILF);
+                    break;
+                  }
+              }
+          }
+
+        continue;
+      }
+
+      /* We get here except in the case that we just read a rule line.
+         Record now the last rule we read, so following spurious
+         commands are properly diagnosed.  */
+      record_waiting_files ();
+    }
+
+#undef word1eq
+
+  if (conditionals->if_cmds)
+    O (fatal, fstart, _("missing 'endif'"));
+
+  /* At eof, record the last rule.  */
+  record_waiting_files ();
+
+  free (collapsed);
+  free (commands);
+}
+
+
+/* Remove comments from LINE.
+   This is done by copying the text at LINE onto itself.  */
+
+static void
+remove_comments (char *line)
+{
+  char *comment;
+
+  comment = find_char_unquote (line, MAP_COMMENT);
+
+  if (comment != 0)
+    /* Cut off the line at the #.  */
+    *comment = '\0';
+}
+
+/* Execute a 'undefine' directive.
+   The undefine line has already been read, and NAME is the name of
+   the variable to be undefined. */
+
+static void
+do_undefine (char *name, enum variable_origin origin, struct ebuffer *ebuf)
+{
+  char *p, *var;
+
+  /* Expand the variable name and find the beginning (NAME) and end.  */
+  var = allocated_variable_expand (name);
+  name = next_token (var);
+  if (*name == '\0')
+    O (fatal, &ebuf->floc, _("empty variable name"));
+  p = name + strlen (name) - 1;
+  while (p > name && isblank ((unsigned char)*p))
+    --p;
+  p[1] = '\0';
+
+  undefine_variable_global (name, p - name + 1, origin);
+  free (var);
+}
+
+/* Execute a 'define' directive.
+   The first line has already been read, and NAME is the name of
+   the variable to be defined.  The following lines remain to be read.  */
+
+static struct variable *
+do_define (char *name, enum variable_origin origin, struct ebuffer *ebuf)
+{
+  struct variable *v;
+  struct variable var;
+  gmk_floc defstart;
+  int nlevels = 1;
+  unsigned int length = 100;
+  char *definition = xmalloc (length);
+  unsigned int idx = 0;
+  char *p, *n;
+
+  defstart = ebuf->floc;
+
+  p = parse_variable_definition (name, &var);
+  if (p == NULL)
+    /* No assignment token, so assume recursive.  */
+    var.flavor = f_recursive;
+  else
+    {
+      if (var.value[0] != '\0')
+        O (error, &defstart, _("extraneous text after 'define' directive"));
+
+      /* Chop the string before the assignment token to get the name.  */
+      var.name[var.length] = '\0';
+    }
+
+  /* Expand the variable name and find the beginning (NAME) and end.  */
+  n = allocated_variable_expand (name);
+  name = next_token (n);
+  if (name[0] == '\0')
+    O (fatal, &defstart, _("empty variable name"));
+  p = name + strlen (name) - 1;
+  while (p > name && isblank ((unsigned char)*p))
+    --p;
+  p[1] = '\0';
+
+  /* Now read the value of the variable.  */
+  while (1)
+    {
+      unsigned int len;
+      char *line;
+      long nlines = readline (ebuf);
+
+      /* If there is nothing left to be eval'd, there's no 'endef'!!  */
+      if (nlines < 0)
+        O (fatal, &defstart, _("missing 'endef', unterminated 'define'"));
+
+      ebuf->floc.lineno += nlines;
+      line = ebuf->buffer;
+
+      collapse_continuations (line);
+
+      /* If the line doesn't begin with a tab, test to see if it introduces
+         another define, or ends one.  Stop if we find an 'endef' */
+      if (line[0] != cmd_prefix)
+        {
+          p = next_token (line);
+          len = strlen (p);
+
+          /* If this is another 'define', increment the level count.  */
+          if ((len == 6 || (len > 6 && isblank ((unsigned char)p[6])))
+              && strneq (p, "define", 6))
+            ++nlevels;
+
+          /* If this is an 'endef', decrement the count.  If it's now 0,
+             we've found the last one.  */
+          else if ((len == 5 || (len > 5 && isblank ((unsigned char)p[5])))
+                   && strneq (p, "endef", 5))
+            {
+              p += 5;
+              remove_comments (p);
+              if (*(next_token (p)) != '\0')
+                O (error, &ebuf->floc,
+                   _("extraneous text after 'endef' directive"));
+
+              if (--nlevels == 0)
+                break;
+            }
+        }
+
+      /* Add this line to the variable definition.  */
+      len = strlen (line);
+      if (idx + len + 1 > length)
+        {
+          length = (idx + len) * 2;
+          definition = xrealloc (definition, length + 1);
+        }
+
+      memcpy (&definition[idx], line, len);
+      idx += len;
+      /* Separate lines with a newline.  */
+      definition[idx++] = '\n';
+    }
+
+  /* We've got what we need; define the variable.  */
+  if (idx == 0)
+    definition[0] = '\0';
+  else
+    definition[idx - 1] = '\0';
+
+  v = do_variable_definition (&defstart, name,
+                              definition, origin, var.flavor, 0);
+  free (definition);
+  free (n);
+  return (v);
+}
+
+/* Interpret conditional commands "ifdef", "ifndef", "ifeq",
+   "ifneq", "else" and "endif".
+   LINE is the input line, with the command as its first word.
+
+   FILENAME and LINENO are the filename and line number in the
+   current makefile.  They are used for error messages.
+
+   Value is -2 if the line is not a conditional at all,
+   -1 if the line is an invalid conditional,
+   0 if following text should be interpreted,
+   1 if following text should be ignored.  */
+
+static int
+conditional_line (char *line, int len, const gmk_floc *flocp)
+{
+  const char *cmdname;
+  enum { c_ifdef, c_ifndef, c_ifeq, c_ifneq, c_else, c_endif } cmdtype;
+  unsigned int i;
+  unsigned int o;
+
+  /* Compare a word, both length and contents. */
+#define word1eq(s)      (len == CSTRLEN (s) && strneq (s, line, CSTRLEN (s)))
+#define chkword(s, t)   if (word1eq (s)) { cmdtype = (t); cmdname = (s); }
+
+  /* Make sure this line is a conditional.  */
+  chkword ("ifdef", c_ifdef)
+  else chkword ("ifndef", c_ifndef)
+  else chkword ("ifeq", c_ifeq)
+  else chkword ("ifneq", c_ifneq)
+  else chkword ("else", c_else)
+  else chkword ("endif", c_endif)
+  else
+    return -2;
+
+  /* Found one: skip past it and any whitespace after it.  */
+  line = next_token (line + len);
+
+#define EXTRATEXT() OS (error, flocp, _("extraneous text after '%s' directive"), cmdname)
+#define EXTRACMD()  OS (fatal, flocp, _("extraneous '%s'"), cmdname)
+
+  /* An 'endif' cannot contain extra text, and reduces the if-depth by 1  */
+  if (cmdtype == c_endif)
+    {
+      if (*line != '\0')
+        EXTRATEXT ();
+
+      if (!conditionals->if_cmds)
+        EXTRACMD ();
+
+      --conditionals->if_cmds;
+
+      goto DONE;
+    }
+
+  /* An 'else' statement can either be simple, or it can have another
+     conditional after it.  */
+  if (cmdtype == c_else)
+    {
+      const char *p;
+
+      if (!conditionals->if_cmds)
+        EXTRACMD ();
+
+      o = conditionals->if_cmds - 1;
+
+      if (conditionals->seen_else[o])
+        O (fatal, flocp, _("only one 'else' per conditional"));
+
+      /* Change the state of ignorance.  */
+      switch (conditionals->ignoring[o])
+        {
+          case 0:
+            /* We've just been interpreting.  Never do it again.  */
+            conditionals->ignoring[o] = 2;
+            break;
+          case 1:
+            /* We've never interpreted yet.  Maybe this time!  */
+            conditionals->ignoring[o] = 0;
+            break;
+        }
+
+      /* It's a simple 'else'.  */
+      if (*line == '\0')
+        {
+          conditionals->seen_else[o] = 1;
+          goto DONE;
+        }
+
+      /* The 'else' has extra text.  That text must be another conditional
+         and cannot be an 'else' or 'endif'.  */
+
+      /* Find the length of the next word.  */
+      for (p = line+1; ! STOP_SET (*p, MAP_SPACE|MAP_NUL); ++p)
+        ;
+      len = p - line;
+
+      /* If it's 'else' or 'endif' or an illegal conditional, fail.  */
+      if (word1eq ("else") || word1eq ("endif")
+          || conditional_line (line, len, flocp) < 0)
+        EXTRATEXT ();
+      else
+        {
+          /* conditional_line() created a new level of conditional.
+             Raise it back to this level.  */
+          if (conditionals->ignoring[o] < 2)
+            conditionals->ignoring[o] = conditionals->ignoring[o+1];
+          --conditionals->if_cmds;
+        }
+
+      goto DONE;
+    }
+
+  if (conditionals->allocated == 0)
+    {
+      conditionals->allocated = 5;
+      conditionals->ignoring = xmalloc (conditionals->allocated);
+      conditionals->seen_else = xmalloc (conditionals->allocated);
+    }
+
+  o = conditionals->if_cmds++;
+  if (conditionals->if_cmds > conditionals->allocated)
+    {
+      conditionals->allocated += 5;
+      conditionals->ignoring = xrealloc (conditionals->ignoring,
+                                         conditionals->allocated);
+      conditionals->seen_else = xrealloc (conditionals->seen_else,
+                                          conditionals->allocated);
+    }
+
+  /* Record that we have seen an 'if...' but no 'else' so far.  */
+  conditionals->seen_else[o] = 0;
+
+  /* Search through the stack to see if we're already ignoring.  */
+  for (i = 0; i < o; ++i)
+    if (conditionals->ignoring[i])
+      {
+        /* We are already ignoring, so just push a level to match the next
+           "else" or "endif", and keep ignoring.  We don't want to expand
+           variables in the condition.  */
+        conditionals->ignoring[o] = 1;
+        return 1;
+      }
+
+  if (cmdtype == c_ifdef || cmdtype == c_ifndef)
+    {
+      char *var;
+      struct variable *v;
+      char *p;
+
+      /* Expand the thing we're looking up, so we can use indirect and
+         constructed variable names.  */
+      var = allocated_variable_expand (line);
+
+      /* Make sure there's only one variable name to test.  */
+      p = end_of_token (var);
+      i = p - var;
+      p = next_token (p);
+      if (*p != '\0')
+        return -1;
+
+      var[i] = '\0';
+      v = lookup_variable (var, i);
+
+      conditionals->ignoring[o] =
+        ((v != 0 && *v->value != '\0') == (cmdtype == c_ifndef));
+
+      free (var);
+    }
+  else
+    {
+      /* "ifeq" or "ifneq".  */
+      char *s1, *s2;
+      unsigned int l;
+      char termin = *line == '(' ? ',' : *line;
+
+      if (termin != ',' && termin != '"' && termin != '\'')
+        return -1;
+
+      s1 = ++line;
+      /* Find the end of the first string.  */
+      if (termin == ',')
+        {
+          int count = 0;
+          for (; *line != '\0'; ++line)
+            if (*line == '(')
+              ++count;
+            else if (*line == ')')
+              --count;
+            else if (*line == ',' && count <= 0)
+              break;
+        }
+      else
+        while (*line != '\0' && *line != termin)
+          ++line;
+
+      if (*line == '\0')
+        return -1;
+
+      if (termin == ',')
+        {
+          /* Strip blanks after the first string.  */
+          char *p = line++;
+          while (isblank ((unsigned char)p[-1]))
+            --p;
+          *p = '\0';
+        }
+      else
+        *line++ = '\0';
+
+      s2 = variable_expand (s1);
+      /* We must allocate a new copy of the expanded string because
+         variable_expand re-uses the same buffer.  */
+      l = strlen (s2);
+      s1 = alloca (l + 1);
+      memcpy (s1, s2, l + 1);
+
+      if (termin != ',')
+        /* Find the start of the second string.  */
+        line = next_token (line);
+
+      termin = termin == ',' ? ')' : *line;
+      if (termin != ')' && termin != '"' && termin != '\'')
+        return -1;
+
+      /* Find the end of the second string.  */
+      if (termin == ')')
+        {
+          int count = 0;
+          s2 = next_token (line);
+          for (line = s2; *line != '\0'; ++line)
+            {
+              if (*line == '(')
+                ++count;
+              else if (*line == ')')
+                {
+                  if (count <= 0)
+                    break;
+                  else
+                    --count;
+                }
+            }
+        }
+      else
+        {
+          ++line;
+          s2 = line;
+          while (*line != '\0' && *line != termin)
+            ++line;
+        }
+
+      if (*line == '\0')
+        return -1;
+
+      *line = '\0';
+      line = next_token (++line);
+      if (*line != '\0')
+        EXTRATEXT ();
+
+      s2 = variable_expand (s2);
+      conditionals->ignoring[o] = (streq (s1, s2) == (cmdtype == c_ifneq));
+    }
+
+ DONE:
+  /* Search through the stack to see if we're ignoring.  */
+  for (i = 0; i < conditionals->if_cmds; ++i)
+    if (conditionals->ignoring[i])
+      return 1;
+  return 0;
+}
+
+
+/* Record target-specific variable values for files FILENAMES.
+   TWO_COLON is nonzero if a double colon was used.
+
+   The links of FILENAMES are freed, and so are any names in it
+   that are not incorporated into other data structures.
+
+   If the target is a pattern, add the variable to the pattern-specific
+   variable value list.  */
+
+static void
+record_target_var (struct nameseq *filenames, char *defn,
+                   enum variable_origin origin, struct vmodifiers *vmod,
+                   const gmk_floc *flocp)
+{
+  struct nameseq *nextf;
+  struct variable_set_list *global;
+
+  global = current_variable_set_list;
+
+  /* If the variable is an append version, store that but treat it as a
+     normal recursive variable.  */
+
+  for (; filenames != 0; filenames = nextf)
+    {
+      struct variable *v;
+      const char *name = filenames->name;
+      const char *percent;
+      struct pattern_var *p;
+
+      nextf = filenames->next;
+      free_ns (filenames);
+
+      /* If it's a pattern target, then add it to the pattern-specific
+         variable list.  */
+      percent = find_percent_cached (&name);
+      if (percent)
+        {
+          /* Get a reference for this pattern-specific variable struct.  */
+          p = create_pattern_var (name, percent);
+          p->variable.fileinfo = *flocp;
+          /* I don't think this can fail since we already determined it was a
+             variable definition.  */
+          v = assign_variable_definition (&p->variable, defn);
+          assert (v != 0);
+
+          v->origin = origin;
+          if (v->flavor == f_simple)
+            v->value = allocated_variable_expand (v->value);
+          else
+            v->value = xstrdup (v->value);
+        }
+      else
+        {
+          struct file *f;
+
+          /* Get a file reference for this file, and initialize it.
+             We don't want to just call enter_file() because that allocates a
+             new entry if the file is a double-colon, which we don't want in
+             this situation.  */
+          f = lookup_file (name);
+          if (!f)
+            f = enter_file (strcache_add (name));
+          else if (f->double_colon)
+            f = f->double_colon;
+
+          initialize_file_variables (f, 1);
+
+          current_variable_set_list = f->variables;
+          v = try_variable_definition (flocp, defn, origin, 1);
+          if (!v)
+            O (fatal, flocp, _("Malformed target-specific variable definition"));
+          current_variable_set_list = global;
+        }
+
+      /* Set up the variable to be *-specific.  */
+      v->per_target = 1;
+      v->private_var = vmod->private_v;
+      v->export = vmod->export_v ? v_export : v_default;
+
+      /* If it's not an override, check to see if there was a command-line
+         setting.  If so, reset the value.  */
+      if (v->origin != o_override)
+        {
+          struct variable *gv;
+          int len = strlen (v->name);
+
+          gv = lookup_variable (v->name, len);
+          if (gv && v != gv
+              && (gv->origin == o_env_override || gv->origin == o_command))
+            {
+              free (v->value);
+              v->value = xstrdup (gv->value);
+              v->origin = gv->origin;
+              v->recursive = gv->recursive;
+              v->append = 0;
+            }
+        }
+    }
+}
+
+/* Record a description line for files FILENAMES,
+   with dependencies DEPS, commands to execute described
+   by COMMANDS and COMMANDS_IDX, coming from FILENAME:COMMANDS_STARTED.
+   TWO_COLON is nonzero if a double colon was used.
+   If not nil, PATTERN is the '%' pattern to make this
+   a static pattern rule, and PATTERN_PERCENT is a pointer
+   to the '%' within it.
+
+   The links of FILENAMES are freed, and so are any names in it
+   that are not incorporated into other data structures.  */
+
+static void
+record_files (struct nameseq *filenames, const char *pattern,
+              const char *pattern_percent, char *depstr,
+              unsigned int cmds_started, char *commands,
+              unsigned int commands_idx, int two_colon,
+              char prefix, const gmk_floc *flocp)
+{
+  struct commands *cmds;
+  struct dep *deps;
+  const char *implicit_percent;
+  const char *name;
+
+  /* If we've already snapped deps, that means we're in an eval being
+     resolved after the makefiles have been read in.  We can't add more rules
+     at this time, since they won't get snapped and we'll get core dumps.
+     See Savannah bug # 12124.  */
+  if (snapped_deps)
+    O (fatal, flocp, _("prerequisites cannot be defined in recipes"));
+
+  /* Determine if this is a pattern rule or not.  */
+  name = filenames->name;
+  implicit_percent = find_percent_cached (&name);
+
+  /* If there's a recipe, set up a struct for it.  */
+  if (commands_idx > 0)
+    {
+      cmds = xmalloc (sizeof (struct commands));
+      cmds->fileinfo.filenm = flocp->filenm;
+      cmds->fileinfo.lineno = cmds_started;
+      cmds->commands = xstrndup (commands, commands_idx);
+      cmds->command_lines = 0;
+      cmds->recipe_prefix = prefix;
+    }
+  else
+     cmds = 0;
+
+  /* If there's a prereq string then parse it--unless it's eligible for 2nd
+     expansion: if so, snap_deps() will do it.  */
+  if (depstr == 0)
+    deps = 0;
+  else
+    {
+      depstr = unescape_char (depstr, ':');
+      if (second_expansion && strchr (depstr, '$'))
+        {
+          deps = alloc_dep ();
+          deps->name = depstr;
+          deps->need_2nd_expansion = 1;
+          deps->staticpattern = pattern != 0;
+        }
+      else
+        {
+          deps = split_prereqs (depstr);
+          free (depstr);
+
+          /* We'll enter static pattern prereqs later when we have the stem.
+             We don't want to enter pattern rules at all so that we don't
+             think that they ought to exist (make manual "Implicit Rule Search
+             Algorithm", item 5c).  */
+          if (! pattern && ! implicit_percent)
+            deps = enter_prereqs (deps, NULL);
+        }
+    }
+
+  /* For implicit rules, _all_ the targets must have a pattern.  That means we
+     can test the first one to see if we're working with an implicit rule; if
+     so we handle it specially. */
+
+  if (implicit_percent)
+    {
+      struct nameseq *nextf;
+      const char **targets, **target_pats;
+      unsigned int c;
+
+      if (pattern != 0)
+        O (fatal, flocp, _("mixed implicit and static pattern rules"));
+
+      /* Count the targets to create an array of target names.
+         We already have the first one.  */
+      nextf = filenames->next;
+      free_ns (filenames);
+      filenames = nextf;
+
+      for (c = 1; nextf; ++c, nextf = nextf->next)
+        ;
+      targets = xmalloc (c * sizeof (const char *));
+      target_pats = xmalloc (c * sizeof (const char *));
+
+      targets[0] = name;
+      target_pats[0] = implicit_percent;
+
+      c = 1;
+      while (filenames)
+        {
+          name = filenames->name;
+          implicit_percent = find_percent_cached (&name);
+
+          if (implicit_percent == 0)
+            O (fatal, flocp, _("mixed implicit and normal rules"));
+
+          targets[c] = name;
+          target_pats[c] = implicit_percent;
+          ++c;
+
+          nextf = filenames->next;
+          free_ns (filenames);
+          filenames = nextf;
+        }
+
+      create_pattern_rule (targets, target_pats, c, two_colon, deps, cmds, 1);
+
+      return;
+    }
+
+
+  /* Walk through each target and create it in the database.
+     We already set up the first target, above.  */
+  while (1)
+    {
+      struct nameseq *nextf = filenames->next;
+      struct file *f;
+      struct dep *this = 0;
+
+      free_ns (filenames);
+
+      /* Check for special targets.  Do it here instead of, say, snap_deps()
+         so that we can immediately use the value.  */
+      if (streq (name, ".POSIX"))
+        {
+          posix_pedantic = 1;
+          define_variable_cname (".SHELLFLAGS", "-ec", o_default, 0);
+          /* These default values are based on IEEE Std 1003.1-2008.  */
+          define_variable_cname ("ARFLAGS", "-rv", o_default, 0);
+          define_variable_cname ("CC", "c99", o_default, 0);
+          define_variable_cname ("CFLAGS", "-O", o_default, 0);
+          define_variable_cname ("FC", "fort77", o_default, 0);
+          define_variable_cname ("FFLAGS", "-O 1", o_default, 0);
+          define_variable_cname ("SCCSGETFLAGS", "-s", o_default, 0);
+        }
+      else if (streq (name, ".SECONDEXPANSION"))
+        second_expansion = 1;
+#if !defined (__MSDOS__) && !defined (__EMX__)
+      else if (streq (name, ".ONESHELL"))
+        one_shell = 1;
+#endif
+
+      /* If this is a static pattern rule:
+         'targets: target%pattern: prereq%pattern; recipe',
+         make sure the pattern matches this target name.  */
+      if (pattern && !pattern_matches (pattern, pattern_percent, name))
+        OS (error, flocp,
+            _("target '%s' doesn't match the target pattern"), name);
+      else if (deps)
+        /* If there are multiple targets, copy the chain DEPS for all but the
+           last one.  It is not safe for the same deps to go in more than one
+           place in the database.  */
+        this = nextf != 0 ? copy_dep_chain (deps) : deps;
+
+      /* Find or create an entry in the file database for this target.  */
+      if (!two_colon)
+        {
+          /* Single-colon.  Combine this rule with the file's existing record,
+             if any.  */
+          f = enter_file (strcache_add (name));
+          if (f->double_colon)
+            OS (fatal, flocp,
+                _("target file '%s' has both : and :: entries"), f->name);
+
+          /* If CMDS == F->CMDS, this target was listed in this rule
+             more than once.  Just give a warning since this is harmless.  */
+          if (cmds != 0 && cmds == f->cmds)
+            OS (error, flocp,
+                _("target '%s' given more than once in the same rule"),
+                f->name);
+
+          /* Check for two single-colon entries both with commands.
+             Check is_target so that we don't lose on files such as .c.o
+             whose commands were preinitialized.  */
+          else if (cmds != 0 && f->cmds != 0 && f->is_target)
+            {
+              size_t l = strlen (f->name);
+              error (&cmds->fileinfo, l,
+                     _("warning: overriding recipe for target '%s'"),
+                     f->name);
+              error (&f->cmds->fileinfo, l,
+                     _("warning: ignoring old recipe for target '%s'"),
+                     f->name);
+            }
+
+          /* Defining .DEFAULT with no deps or cmds clears it.  */
+          if (f == default_file && this == 0 && cmds == 0)
+            f->cmds = 0;
+          if (cmds != 0)
+            f->cmds = cmds;
+
+          /* Defining .SUFFIXES with no dependencies clears out the list of
+             suffixes.  */
+          if (f == suffix_file && this == 0)
+            {
+              free_dep_chain (f->deps);
+              f->deps = 0;
+            }
+        }
+      else
+        {
+          /* Double-colon.  Make a new record even if there already is one.  */
+          f = lookup_file (name);
+
+          /* Check for both : and :: rules.  Check is_target so we don't lose
+             on default suffix rules or makefiles.  */
+          if (f != 0 && f->is_target && !f->double_colon)
+            OS (fatal, flocp,
+                _("target file '%s' has both : and :: entries"), f->name);
+
+          f = enter_file (strcache_add (name));
+          /* If there was an existing entry and it was a double-colon entry,
+             enter_file will have returned a new one, making it the prev
+             pointer of the old one, and setting its double_colon pointer to
+             the first one.  */
+          if (f->double_colon == 0)
+            /* This is the first entry for this name, so we must set its
+               double_colon pointer to itself.  */
+            f->double_colon = f;
+
+          f->cmds = cmds;
+        }
+
+      f->is_target = 1;
+
+      /* If this is a static pattern rule, set the stem to the part of its
+         name that matched the '%' in the pattern, so you can use $* in the
+         commands.  If we didn't do it before, enter the prereqs now.  */
+      if (pattern)
+        {
+          static const char *percent = "%";
+          char *buffer = variable_expand ("");
+          char *o = patsubst_expand_pat (buffer, name, pattern, percent,
+                                         pattern_percent+1, percent+1);
+          f->stem = strcache_add_len (buffer, o - buffer);
+          if (this)
+            {
+              if (! this->need_2nd_expansion)
+                this = enter_prereqs (this, f->stem);
+              else
+                this->stem = f->stem;
+            }
+        }
+
+      /* Add the dependencies to this file entry.  */
+      if (this != 0)
+        {
+          /* Add the file's old deps and the new ones in THIS together.  */
+          if (f->deps == 0)
+            f->deps = this;
+          else if (cmds != 0)
+            {
+              struct dep *d = this;
+
+              /* If this rule has commands, put these deps first.  */
+              while (d->next != 0)
+                d = d->next;
+
+              d->next = f->deps;
+              f->deps = this;
+            }
+          else
+            {
+              struct dep *d = f->deps;
+
+              /* A rule without commands: put its prereqs at the end.  */
+              while (d->next != 0)
+                d = d->next;
+
+              d->next = this;
+            }
+        }
+
+      name = f->name;
+
+      /* All done!  Set up for the next one.  */
+      if (nextf == 0)
+        break;
+
+      filenames = nextf;
+
+      /* Reduce escaped percents.  If there are any unescaped it's an error  */
+      name = filenames->name;
+      if (find_percent_cached (&name))
+        O (error, flocp,
+           _("*** mixed implicit and normal rules: deprecated syntax"));
+    }
+}
+
+/* Search STRING for an unquoted STOPCHAR or blank (if BLANK is nonzero).
+   Backslashes quote STOPCHAR, blanks if BLANK is nonzero, and backslash.
+   Quoting backslashes are removed from STRING by compacting it into
+   itself.  Returns a pointer to the first unquoted STOPCHAR if there is
+   one, or nil if there are none.  STOPCHARs inside variable references are
+   ignored if IGNOREVARS is true.
+
+   STOPCHAR _cannot_ be '$' if IGNOREVARS is true.  */
+
+static char *
+find_char_unquote (char *string, int map)
+{
+  unsigned int string_len = 0;
+  char *p = string;
+
+  /* Always stop on NUL.  */
+  map |= MAP_NUL;
+
+  while (1)
+    {
+      while (! STOP_SET (*p, map))
+        ++p;
+
+      if (*p == '\0')
+        break;
+
+      /* If we stopped due to a variable reference, skip over its contents.  */
+      if (STOP_SET (*p, MAP_VARIABLE))
+        {
+          char openparen = p[1];
+
+          p += 2;
+
+          /* Skip the contents of a non-quoted, multi-char variable ref.  */
+          if (openparen == '(' || openparen == '{')
+            {
+              unsigned int pcount = 1;
+              char closeparen = (openparen == '(' ? ')' : '}');
+
+              while (*p)
+                {
+                  if (*p == openparen)
+                    ++pcount;
+                  else if (*p == closeparen)
+                    if (--pcount == 0)
+                      {
+                        ++p;
+                        break;
+                      }
+                  ++p;
+                }
+            }
+
+          /* Skipped the variable reference: look for STOPCHARS again.  */
+          continue;
+        }
+
+      if (p > string && p[-1] == '\\')
+        {
+          /* Search for more backslashes.  */
+          int i = -2;
+          while (&p[i] >= string && p[i] == '\\')
+            --i;
+          ++i;
+          /* Only compute the length if really needed.  */
+          if (string_len == 0)
+            string_len = strlen (string);
+          /* The number of backslashes is now -I.
+             Copy P over itself to swallow half of them.  */
+          memmove (&p[i], &p[i/2], (string_len - (p - string)) - (i/2) + 1);
+          p += i/2;
+          if (i % 2 == 0)
+            /* All the backslashes quoted each other; the STOPCHAR was
+               unquoted.  */
+            return p;
+
+          /* The STOPCHAR was quoted by a backslash.  Look for another.  */
+        }
+      else
+        /* No backslash in sight.  */
+        return p;
+    }
+
+  /* Never hit a STOPCHAR or blank (with BLANK nonzero).  */
+  return 0;
+}
+
+/* Unescape a character in a string.  The string is compressed onto itself.  */
+
+static char *
+unescape_char (char *string, int c)
+{
+  char *p = string;
+  char *s = string;
+
+  while (*s != '\0')
+    {
+      if (*s == '\\')
+        {
+          char *e = s;
+          int l;
+
+          /* We found a backslash.  See if it's escaping our character.  */
+          while (*e == '\\')
+            ++e;
+          l = e - s;
+
+          if (*e != c || l%2 == 0)
+            {
+              /* It's not; just take it all without unescaping.  */
+              memmove (p, s, l);
+              p += l;
+            }
+          else if (l > 1)
+            {
+              /* It is, and there's >1 backslash.  Take half of them.  */
+              l /= 2;
+              memmove (p, s, l);
+              p += l;
+            }
+          s = e;
+        }
+
+      *(p++) = *(s++);
+    }
+
+  *p = '\0';
+  return string;
+}
+
+/* Search PATTERN for an unquoted % and handle quoting.  */
+
+char *
+find_percent (char *pattern)
+{
+  return find_char_unquote (pattern, MAP_PERCENT);
+}
+
+/* Search STRING for an unquoted % and handle quoting.  Returns a pointer to
+   the % or NULL if no % was found.
+   This version is used with strings in the string cache: if there's a need to
+   modify the string a new version will be added to the string cache and
+   *STRING will be set to that.  */
+
+const char *
+find_percent_cached (const char **string)
+{
+  const char *p = *string;
+  char *new = 0;
+  int slen = 0;
+
+  /* If the first char is a % return now.  This lets us avoid extra tests
+     inside the loop.  */
+  if (*p == '%')
+    return p;
+
+  while (1)
+    {
+      while (! STOP_SET (*p, MAP_PERCENT|MAP_NUL))
+        ++p;
+
+      if (*p == '\0')
+        break;
+
+      /* See if this % is escaped with a backslash; if not we're done.  */
+      if (p[-1] != '\\')
+        break;
+
+      {
+        /* Search for more backslashes.  */
+        char *pv;
+        int i = -2;
+
+        while (&p[i] >= *string && p[i] == '\\')
+          --i;
+        ++i;
+
+        /* At this point we know we'll need to allocate a new string.
+           Make a copy if we haven't yet done so.  */
+        if (! new)
+          {
+            slen = strlen (*string);
+            new = alloca (slen + 1);
+            memcpy (new, *string, slen + 1);
+            p = new + (p - *string);
+            *string = new;
+          }
+
+        /* At this point *string, p, and new all point into the same string.
+           Get a non-const version of p so we can modify new.  */
+        pv = new + (p - *string);
+
+        /* The number of backslashes is now -I.
+           Copy P over itself to swallow half of them.  */
+        memmove (&pv[i], &pv[i/2], (slen - (pv - new)) - (i/2) + 1);
+        p += i/2;
+
+        /* If the backslashes quoted each other; the % was unquoted.  */
+        if (i % 2 == 0)
+          break;
+      }
+    }
+
+  /* If we had to change STRING, add it to the strcache.  */
+  if (new)
+    {
+      *string = strcache_add (*string);
+      p = *string + (p - new);
+    }
+
+  /* If we didn't find a %, return NULL.  Otherwise return a ptr to it.  */
+  return (*p == '\0') ? NULL : p;
+}
+
+/* Find the next line of text in an eval buffer, combining continuation lines
+   into one line.
+   Return the number of actual lines read (> 1 if continuation lines).
+   Returns -1 if there's nothing left in the buffer.
+
+   After this function, ebuf->buffer points to the first character of the
+   line we just found.
+ */
+
+/* Read a line of text from a STRING.
+   Since we aren't really reading from a file, don't bother with linenumbers.
+ */
+
+static unsigned long
+readstring (struct ebuffer *ebuf)
+{
+  char *eol;
+
+  /* If there is nothing left in this buffer, return 0.  */
+  if (ebuf->bufnext >= ebuf->bufstart + ebuf->size)
+    return -1;
+
+  /* Set up a new starting point for the buffer, and find the end of the
+     next logical line (taking into account backslash/newline pairs).  */
+
+  eol = ebuf->buffer = ebuf->bufnext;
+
+  while (1)
+    {
+      int backslash = 0;
+      const char *bol = eol;
+      const char *p;
+
+      /* Find the next newline.  At EOS, stop.  */
+      p = eol = strchr (eol , '\n');
+      if (!eol)
+        {
+          ebuf->bufnext = ebuf->bufstart + ebuf->size + 1;
+          return 0;
+        }
+
+      /* Found a newline; if it's escaped continue; else we're done.  */
+      while (p > bol && *(--p) == '\\')
+        backslash = !backslash;
+      if (!backslash)
+        break;
+      ++eol;
+    }
+
+  /* Overwrite the newline char.  */
+  *eol = '\0';
+  ebuf->bufnext = eol+1;
+
+  return 0;
+}
+
+static long
+readline (struct ebuffer *ebuf)
+{
+  char *p;
+  char *end;
+  char *start;
+  long nlines = 0;
+
+  /* The behaviors between string and stream buffers are different enough to
+     warrant different functions.  Do the Right Thing.  */
+
+  if (!ebuf->fp)
+    return readstring (ebuf);
+
+  /* When reading from a file, we always start over at the beginning of the
+     buffer for each new line.  */
+
+  p = start = ebuf->bufstart;
+  end = p + ebuf->size;
+  *p = '\0';
+
+  while (fgets (p, end - p, ebuf->fp) != 0)
+    {
+      char *p2;
+      unsigned long len;
+      int backslash;
+
+      len = strlen (p);
+      if (len == 0)
+        {
+          /* This only happens when the first thing on the line is a '\0'.
+             It is a pretty hopeless case, but (wonder of wonders) Athena
+             lossage strikes again!  (xmkmf puts NULs in its makefiles.)
+             There is nothing really to be done; we synthesize a newline so
+             the following line doesn't appear to be part of this line.  */
+          O (error, &ebuf->floc,
+             _("warning: NUL character seen; rest of line ignored"));
+          p[0] = '\n';
+          len = 1;
+        }
+
+      /* Jump past the text we just read.  */
+      p += len;
+
+      /* If the last char isn't a newline, the whole line didn't fit into the
+         buffer.  Get some more buffer and try again.  */
+      if (p[-1] != '\n')
+        goto more_buffer;
+
+      /* We got a newline, so add one to the count of lines.  */
+      ++nlines;
+
+#if !defined(WINDOWS32) && !defined(__MSDOS__) && !defined(__EMX__)
+      /* Check to see if the line was really ended with CRLF; if so ignore
+         the CR.  */
+      if ((p - start) > 1 && p[-2] == '\r')
+        {
+          --p;
+          memmove (p-1, p, strlen (p) + 1);
+        }
+#endif
+
+      backslash = 0;
+      for (p2 = p - 2; p2 >= start; --p2)
+        {
+          if (*p2 != '\\')
+            break;
+          backslash = !backslash;
+        }
+
+      if (!backslash)
+        {
+          p[-1] = '\0';
+          break;
+        }
+
+      /* It was a backslash/newline combo.  If we have more space, read
+         another line.  */
+      if (end - p >= 80)
+        continue;
+
+      /* We need more space at the end of our buffer, so realloc it.
+         Make sure to preserve the current offset of p.  */
+    more_buffer:
+      {
+        unsigned long off = p - start;
+        ebuf->size *= 2;
+        start = ebuf->buffer = ebuf->bufstart = xrealloc (start, ebuf->size);
+        p = start + off;
+        end = start + ebuf->size;
+        *p = '\0';
+      }
+    }
+
+  if (ferror (ebuf->fp))
+    pfatal_with_name (ebuf->floc.filenm);
+
+  /* If we found some lines, return how many.
+     If we didn't, but we did find _something_, that indicates we read the last
+     line of a file with no final newline; return 1.
+     If we read nothing, we're at EOF; return -1.  */
+
+  return nlines ? nlines : p == ebuf->bufstart ? -1 : 1;
+}
+
+/* Parse the next "makefile word" from the input buffer, and return info
+   about it.
+
+   A "makefile word" is one of:
+
+     w_bogus        Should never happen
+     w_eol          End of input
+     w_static       A static word; cannot be expanded
+     w_variable     A word containing one or more variables/functions
+     w_colon        A colon
+     w_dcolon       A double-colon
+     w_semicolon    A semicolon
+     w_varassign    A variable assignment operator (=, :=, ::=, +=, ?=, or !=)
+
+   Note that this function is only used when reading certain parts of the
+   makefile.  Don't use it where special rules hold sway (RHS of a variable,
+   in a command list, etc.)  */
+
+static enum make_word_type
+get_next_mword (char *buffer, char *delim, char **startp, unsigned int *length)
+{
+  enum make_word_type wtype = w_bogus;
+  char *p = buffer, *beg;
+  char c;
+
+  /* Skip any leading whitespace.  */
+  while (isblank ((unsigned char)*p))
+    ++p;
+
+  beg = p;
+  c = *(p++);
+  switch (c)
+    {
+    case '\0':
+      wtype = w_eol;
+      break;
+
+    case ';':
+      wtype = w_semicolon;
+      break;
+
+    case '=':
+      wtype = w_varassign;
+      break;
+
+    case ':':
+      wtype = w_colon;
+      switch (*p)
+        {
+        case ':':
+          ++p;
+          if (p[1] != '=')
+            wtype = w_dcolon;
+          else
+            {
+              wtype = w_varassign;
+              ++p;
+            }
+          break;
+
+        case '=':
+          ++p;
+          wtype = w_varassign;
+          break;
+        }
+      break;
+
+    case '+':
+    case '?':
+    case '!':
+      if (*p == '=')
+        {
+          ++p;
+          wtype = w_varassign;
+          break;
+        }
+
+    default:
+      if (delim && strchr (delim, c))
+        wtype = w_static;
+      break;
+    }
+
+  /* Did we find something?  If so, return now.  */
+  if (wtype != w_bogus)
+    goto done;
+
+  /* This is some non-operator word.  A word consists of the longest
+     string of characters that doesn't contain whitespace, one of [:=#],
+     or [?+!]=, or one of the chars in the DELIM string.  */
+
+  /* We start out assuming a static word; if we see a variable we'll
+     adjust our assumptions then.  */
+  wtype = w_static;
+
+  /* We already found the first value of "c", above.  */
+  while (1)
+    {
+      char closeparen;
+      int count;
+
+      switch (c)
+        {
+        case '\0':
+        case ' ':
+        case '\t':
+        case '=':
+          goto done_word;
+
+        case ':':
+#ifdef HAVE_DOS_PATHS
+          /* A word CAN include a colon in its drive spec.  The drive
+             spec is allowed either at the beginning of a word, or as part
+             of the archive member name, like in "libfoo.a(d:/foo/bar.o)".  */
+          if (!(p - beg >= 2
+                && (*p == '/' || *p == '\\') && isalpha ((unsigned char)p[-2])
+                && (p - beg == 2 || p[-3] == '(')))
+#endif
+          goto done_word;
+
+        case '$':
+          c = *(p++);
+          if (c == '$')
+            break;
+
+          /* This is a variable reference, so note that it's expandable.
+             Then read it to the matching close paren.  */
+          wtype = w_variable;
+
+          if (c == '(')
+            closeparen = ')';
+          else if (c == '{')
+            closeparen = '}';
+          else
+            /* This is a single-letter variable reference.  */
+            break;
+
+          for (count=0; *p != '\0'; ++p)
+            {
+              if (*p == c)
+                ++count;
+              else if (*p == closeparen && --count < 0)
+                {
+                  ++p;
+                  break;
+                }
+            }
+          break;
+
+        case '?':
+        case '+':
+          if (*p == '=')
+            goto done_word;
+          break;
+
+        case '\\':
+          switch (*p)
+            {
+            case ':':
+            case ';':
+            case '=':
+            case '\\':
+              ++p;
+              break;
+            }
+          break;
+
+        default:
+          if (delim && strchr (delim, c))
+            goto done_word;
+          break;
+        }
+
+      c = *(p++);
+    }
+ done_word:
+  --p;
+
+ done:
+  if (startp)
+    *startp = beg;
+  if (length)
+    *length = p - beg;
+  return wtype;
+}
+
+/* Construct the list of include directories
+   from the arguments and the default list.  */
+
+void
+construct_include_path (const char **arg_dirs)
+{
+#ifdef VAXC             /* just don't ask ... */
+  stat_t stbuf;
+#else
+  struct stat stbuf;
+#endif
+  const char **dirs;
+  const char **cpp;
+  unsigned int idx;
+
+  /* Compute the number of pointers we need in the table.  */
+  idx = sizeof (default_include_directories) / sizeof (const char *);
+  if (arg_dirs)
+    for (cpp = arg_dirs; *cpp != 0; ++cpp)
+      ++idx;
+
+#ifdef  __MSDOS__
+  /* Add one for $DJDIR.  */
+  ++idx;
+#endif
+
+  dirs = xmalloc (idx * sizeof (const char *));
+
+  idx = 0;
+  max_incl_len = 0;
+
+  /* First consider any dirs specified with -I switches.
+     Ignore any that don't exist.  Remember the maximum string length.  */
+
+  if (arg_dirs)
+    while (*arg_dirs != 0)
+      {
+        const char *dir = *(arg_dirs++);
+        char *expanded = 0;
+        int e;
+
+        if (dir[0] == '~')
+          {
+            expanded = tilde_expand (dir);
+            if (expanded != 0)
+              dir = expanded;
+          }
+
+        EINTRLOOP (e, stat (dir, &stbuf));
+        if (e == 0 && S_ISDIR (stbuf.st_mode))
+          {
+            unsigned int len = strlen (dir);
+            /* If dir name is written with trailing slashes, discard them.  */
+            while (len > 1 && dir[len - 1] == '/')
+              --len;
+            if (len > max_incl_len)
+              max_incl_len = len;
+            dirs[idx++] = strcache_add_len (dir, len);
+          }
+
+        free (expanded);
+      }
+
+  /* Now add the standard default dirs at the end.  */
+
+#ifdef  __MSDOS__
+  {
+    /* The environment variable $DJDIR holds the root of the DJGPP directory
+       tree; add ${DJDIR}/include.  */
+    struct variable *djdir = lookup_variable ("DJDIR", 5);
+
+    if (djdir)
+      {
+        unsigned int len = strlen (djdir->value) + 8;
+        char *defdir = alloca (len + 1);
+
+        strcat (strcpy (defdir, djdir->value), "/include");
+        dirs[idx++] = strcache_add (defdir);
+
+        if (len > max_incl_len)
+          max_incl_len = len;
+      }
+  }
+#endif
+
+  for (cpp = default_include_directories; *cpp != 0; ++cpp)
+    {
+      int e;
+
+      EINTRLOOP (e, stat (*cpp, &stbuf));
+      if (e == 0 && S_ISDIR (stbuf.st_mode))
+        {
+          unsigned int len = strlen (*cpp);
+          /* If dir name is written with trailing slashes, discard them.  */
+          while (len > 1 && (*cpp)[len - 1] == '/')
+            --len;
+          if (len > max_incl_len)
+            max_incl_len = len;
+          dirs[idx++] = strcache_add_len (*cpp, len);
+        }
+    }
+
+  dirs[idx] = 0;
+
+  /* Now add each dir to the .INCLUDE_DIRS variable.  */
+
+  for (cpp = dirs; *cpp != 0; ++cpp)
+    do_variable_definition (NILF, ".INCLUDE_DIRS", *cpp,
+                            o_default, f_append, 0);
+
+  include_directories = dirs;
+}
+
+/* Expand ~ or ~USER at the beginning of NAME.
+   Return a newly malloc'd string or 0.  */
+
+char *
+tilde_expand (const char *name)
+{
+#ifndef VMS
+  if (name[1] == '/' || name[1] == '\0')
+    {
+      extern char *getenv ();
+      char *home_dir;
+      int is_variable;
+
+      {
+        /* Turn off --warn-undefined-variables while we expand HOME.  */
+        int save = warn_undefined_variables_flag;
+        warn_undefined_variables_flag = 0;
+
+        home_dir = allocated_variable_expand ("$(HOME)");
+
+        warn_undefined_variables_flag = save;
+      }
+
+      is_variable = home_dir[0] != '\0';
+      if (!is_variable)
+        {
+          free (home_dir);
+          home_dir = getenv ("HOME");
+        }
+# if !defined(_AMIGA) && !defined(WINDOWS32)
+      if (home_dir == 0 || home_dir[0] == '\0')
+        {
+          extern char *getlogin ();
+          char *logname = getlogin ();
+          home_dir = 0;
+          if (logname != 0)
+            {
+              struct passwd *p = getpwnam (logname);
+              if (p != 0)
+                home_dir = p->pw_dir;
+            }
+        }
+# endif /* !AMIGA && !WINDOWS32 */
+      if (home_dir != 0)
+        {
+          char *new = xstrdup (concat (2, home_dir, name + 1));
+          if (is_variable)
+            free (home_dir);
+          return new;
+        }
+    }
+# if !defined(_AMIGA) && !defined(WINDOWS32)
+  else
+    {
+      struct passwd *pwent;
+      char *userend = strchr (name + 1, '/');
+      if (userend != 0)
+        *userend = '\0';
+      pwent = getpwnam (name + 1);
+      if (pwent != 0)
+        {
+          if (userend == 0)
+            return xstrdup (pwent->pw_dir);
+          else
+            return xstrdup (concat (3, pwent->pw_dir, "/", userend + 1));
+        }
+      else if (userend != 0)
+        *userend = '/';
+    }
+# endif /* !AMIGA && !WINDOWS32 */
+#endif /* !VMS */
+  return 0;
+}
+
+/* Parse a string into a sequence of filenames represented as a chain of
+   struct nameseq's and return that chain.  Optionally expand the strings via
+   glob().
+
+   The string is passed as STRINGP, the address of a string pointer.
+   The string pointer is updated to point at the first character
+   not parsed, which either is a null char or equals STOPCHAR.
+
+   SIZE is how big to construct chain elements.
+   This is useful if we want them actually to be other structures
+   that have room for additional info.
+
+   PREFIX, if non-null, is added to the beginning of each filename.
+
+   FLAGS allows one or more of the following bitflags to be set:
+        PARSEFS_NOSTRIP - Do no strip './'s off the beginning
+        PARSEFS_NOAR    - Do not check filenames for archive references
+        PARSEFS_NOGLOB  - Do not expand globbing characters
+        PARSEFS_EXISTS  - Only return globbed files that actually exist
+                          (cannot also set NOGLOB)
+        PARSEFS_NOCACHE - Do not add filenames to the strcache (caller frees)
+  */
+
+void *
+parse_file_seq (char **stringp, unsigned int size, int stopmap,
+                const char *prefix, int flags)
+{
+  extern void dir_setup_glob (glob_t *glob);
+
+  /* tmp points to tmpbuf after the prefix, if any.
+     tp is the end of the buffer. */
+  static char *tmpbuf = NULL;
+
+  int cachep = NONE_SET (flags, PARSEFS_NOCACHE);
+
+  struct nameseq *new = 0;
+  struct nameseq **newp = &new;
+#define NEWELT(_n)  do { \
+                        const char *__n = (_n); \
+                        *newp = xcalloc (size); \
+                        (*newp)->name = (cachep ? strcache_add (__n) : xstrdup (__n)); \
+                        newp = &(*newp)->next; \
+                    } while(0)
+
+  char *p;
+  glob_t gl;
+  char *tp;
+
+  /* Always stop on NUL.  */
+  stopmap |= MAP_NUL;
+
+  if (size < sizeof (struct nameseq))
+    size = sizeof (struct nameseq);
+
+  if (NONE_SET (flags, PARSEFS_NOGLOB))
+    dir_setup_glob (&gl);
+
+  /* Get enough temporary space to construct the largest possible target.  */
+  {
+    static int tmpbuf_len = 0;
+    int l = strlen (*stringp) + 1;
+    if (l > tmpbuf_len)
+      {
+        tmpbuf = xrealloc (tmpbuf, l);
+        tmpbuf_len = l;
+      }
+  }
+  tp = tmpbuf;
+
+  /* Parse STRING.  P will always point to the end of the parsed content.  */
+  p = *stringp;
+  while (1)
+    {
+      const char *name;
+      const char **nlist = 0;
+      char *tildep = 0;
+      int globme = 1;
+#ifndef NO_ARCHIVES
+      char *arname = 0;
+      char *memname = 0;
+#endif
+      char *s;
+      int nlen;
+      int i;
+
+      /* Skip whitespace; at the end of the string or STOPCHAR we're done.  */
+      p = next_token (p);
+      if (STOP_SET (*p, stopmap))
+        break;
+
+      /* There are names left, so find the end of the next name.
+         Throughout this iteration S points to the start.  */
+      s = p;
+      p = find_char_unquote (p, stopmap|MAP_VMSCOMMA|MAP_BLANK);
+#ifdef VMS
+        /* convert comma separated list to space separated */
+      if (p && *p == ',')
+        *p =' ';
+#endif
+#ifdef _AMIGA
+      if (p && STOP_SET (*p, stopmap & MAP_COLON)
+          && !(isspace ((unsigned char)p[1]) || !p[1]
+               || isspace ((unsigned char)p[-1])))
+        p = find_char_unquote (p+1, stopmap|MAP_VMSCOMMA|MAP_BLANK);
+#endif
+#ifdef HAVE_DOS_PATHS
+    /* For DOS paths, skip a "C:\..." or a "C:/..." until we find the
+       first colon which isn't followed by a slash or a backslash.
+       Note that tokens separated by spaces should be treated as separate
+       tokens since make doesn't allow path names with spaces */
+    if (stopmap | MAP_COLON)
+      while (p != 0 && !isspace ((unsigned char)*p) &&
+             (p[1] == '\\' || p[1] == '/') && isalpha ((unsigned char)p[-1]))
+        p = find_char_unquote (p + 1, stopmap|MAP_VMSCOMMA|MAP_BLANK);
+#endif
+      if (p == 0)
+        p = s + strlen (s);
+
+      /* Strip leading "this directory" references.  */
+      if (NONE_SET (flags, PARSEFS_NOSTRIP))
+#ifdef VMS
+        /* Skip leading '[]'s.  */
+        while (p - s > 2 && s[0] == '[' && s[1] == ']')
+#else
+        /* Skip leading './'s.  */
+        while (p - s > 2 && s[0] == '.' && s[1] == '/')
+#endif
+          {
+            /* Skip "./" and all following slashes.  */
+            s += 2;
+            while (*s == '/')
+              ++s;
+          }
+
+      /* Extract the filename just found, and skip it.
+         Set NAME to the string, and NLEN to its length.  */
+
+      if (s == p)
+        {
+        /* The name was stripped to empty ("./"). */
+#if defined(VMS)
+          continue;
+#elif defined(_AMIGA)
+          /* PDS-- This cannot be right!! */
+          tp[0] = '\0';
+          nlen = 0;
+#else
+          tp[0] = '.';
+          tp[1] = '/';
+          tp[2] = '\0';
+          nlen = 2;
+#endif
+        }
+      else
+        {
+#ifdef VMS
+/* VMS filenames can have a ':' in them but they have to be '\'ed but we need
+ *  to remove this '\' before we can use the filename.
+ * xstrdup called because S may be read-only string constant.
+ */
+          char *n = tp;
+          while (s < p)
+            {
+              if (s[0] == '\\' && s[1] == ':')
+                ++s;
+              *(n++) = *(s++);
+            }
+          n[0] = '\0';
+          nlen = strlen (tp);
+#else
+          nlen = p - s;
+          memcpy (tp, s, nlen);
+          tp[nlen] = '\0';
+#endif
+        }
+
+      /* At this point, TP points to the element and NLEN is its length.  */
+
+#ifndef NO_ARCHIVES
+      /* If this is the start of an archive group that isn't complete, set up
+         to add the archive prefix for future files.  A file list like:
+         "libf.a(x.o y.o z.o)" needs to be expanded as:
+         "libf.a(x.o) libf.a(y.o) libf.a(z.o)"
+
+         TP == TMP means we're not already in an archive group.  Ignore
+         something starting with '(', as that cannot actually be an
+         archive-member reference (and treating it as such results in an empty
+         file name, which causes much lossage).  Also if it ends in ")" then
+         it's a complete reference so we don't need to treat it specially.
+
+         Finally, note that archive groups must end with ')' as the last
+         character, so ensure there's some word ending like that before
+         considering this an archive group.  */
+      if (NONE_SET (flags, PARSEFS_NOAR)
+          && tp == tmpbuf && tp[0] != '(' && tp[nlen-1] != ')')
+        {
+          char *n = strchr (tp, '(');
+          if (n)
+            {
+              /* This looks like the first element in an open archive group.
+                 A valid group MUST have ')' as the last character.  */
+              const char *e = p;
+              do
+                {
+                  const char *o = e;
+                  e = next_token (e);
+                  /* Find the end of this word.  We don't want to unquote and
+                     we don't care about quoting since we're looking for the
+                     last char in the word. */
+                  while (! STOP_SET (*e, stopmap|MAP_BLANK|MAP_VMSCOMMA))
+                    ++e;
+                  /* If we didn't move, we're done now.  */
+                  if (e == o)
+                    break;
+                  if (e[-1] == ')')
+                    {
+                      /* Found the end, so this is the first element in an
+                         open archive group.  It looks like "lib(mem".
+                         Reset TP past the open paren.  */
+                      nlen -= (n + 1) - tp;
+                      tp = n + 1;
+
+                      /* We can stop looking now.  */
+                      break;
+                    }
+                }
+              while (*e != '\0');
+
+              /* If we have just "lib(", part of something like "lib( a b)",
+                 go to the next item.  */
+              if (! nlen)
+                continue;
+            }
+        }
+
+      /* If we are inside an archive group, make sure it has an end.  */
+      if (tp > tmpbuf)
+        {
+          if (tp[nlen-1] == ')')
+            {
+              /* This is the natural end; reset TP.  */
+              tp = tmpbuf;
+
+              /* This is just ")", something like "lib(a b )": skip it.  */
+              if (nlen == 1)
+                continue;
+            }
+          else
+            {
+              /* Not the end, so add a "fake" end.  */
+              tp[nlen++] = ')';
+              tp[nlen] = '\0';
+            }
+        }
+#endif
+
+      /* If we're not globbing we're done: add it to the end of the chain.
+         Go to the next item in the string.  */
+      if (ANY_SET (flags, PARSEFS_NOGLOB))
+        {
+          NEWELT (concat (2, prefix, tmpbuf));
+          continue;
+        }
+
+      /* If we get here we know we're doing glob expansion.
+         TP is a string in tmpbuf.  NLEN is no longer used.
+         We may need to do more work: after this NAME will be set.  */
+      name = tmpbuf;
+
+      /* Expand tilde if applicable.  */
+      if (tmpbuf[0] == '~')
+        {
+          tildep = tilde_expand (tmpbuf);
+          if (tildep != 0)
+            name = tildep;
+        }
+
+#ifndef NO_ARCHIVES
+      /* If NAME is an archive member reference replace it with the archive
+         file name, and save the member name in MEMNAME.  We will glob on the
+         archive name and then reattach MEMNAME later.  */
+      if (NONE_SET (flags, PARSEFS_NOAR) && ar_name (name))
+        {
+          ar_parse_name (name, &arname, &memname);
+          name = arname;
+        }
+#endif /* !NO_ARCHIVES */
+
+      /* glob() is expensive: don't call it unless we need to.  */
+      if (NONE_SET (flags, PARSEFS_EXISTS) && strpbrk (name, "?*[") == NULL)
+        {
+          globme = 0;
+          i = 1;
+          nlist = &name;
+        }
+      else
+        switch (glob (name, GLOB_NOSORT|GLOB_ALTDIRFUNC, NULL, &gl))
+          {
+          case GLOB_NOSPACE:
+            OUT_OF_MEM();
+
+          case 0:
+            /* Success.  */
+            i = gl.gl_pathc;
+            nlist = (const char **)gl.gl_pathv;
+            break;
+
+          case GLOB_NOMATCH:
+            /* If we want only existing items, skip this one.  */
+            if (ANY_SET (flags, PARSEFS_EXISTS))
+              {
+                i = 0;
+                break;
+              }
+            /* FALLTHROUGH */
+
+          default:
+            /* By default keep this name.  */
+            i = 1;
+            nlist = &name;
+            break;
+          }
+
+      /* For each matched element, add it to the list.  */
+      while (i-- > 0)
+#ifndef NO_ARCHIVES
+        if (memname != 0)
+          {
+            /* Try to glob on MEMNAME within the archive.  */
+            struct nameseq *found = ar_glob (nlist[i], memname, size);
+            if (! found)
+              /* No matches.  Use MEMNAME as-is.  */
+              NEWELT (concat (5, prefix, nlist[i], "(", memname, ")"));
+            else
+              {
+                /* We got a chain of items.  Attach them.  */
+                if (*newp)
+                  (*newp)->next = found;
+                else
+                  *newp = found;
+
+                /* Find and set the new end.  Massage names if necessary.  */
+                while (1)
+                  {
+                    if (! cachep)
+                      found->name = xstrdup (concat (2, prefix, name));
+                    else if (prefix)
+                      found->name = strcache_add (concat (2, prefix, name));
+
+                    if (found->next == 0)
+                      break;
+
+                    found = found->next;
+                  }
+                newp = &found->next;
+              }
+          }
+        else
+#endif /* !NO_ARCHIVES */
+          NEWELT (concat (2, prefix, nlist[i]));
+
+      if (globme)
+        globfree (&gl);
+
+#ifndef NO_ARCHIVES
+      free (arname);
+#endif
+
+      free (tildep);
+    }
+
+  *stringp = p;
+  return new;
+}
diff --git a/remake.c b/remake.c
new file mode 100644
index 0000000..299a2aa
--- /dev/null
+++ b/remake.c
@@ -0,0 +1,1703 @@
+/* Basic dependency engine for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "job.h"
+#include "commands.h"
+#include "dep.h"
+#include "variable.h"
+#include "debug.h"
+
+#include <assert.h>
+
+#ifdef HAVE_FCNTL_H
+#include <fcntl.h>
+#else
+#include <sys/file.h>
+#endif
+
+#ifdef VMS
+#include <starlet.h>
+#endif
+#ifdef WINDOWS32
+#include <io.h>
+#endif
+
+extern int try_implicit_rule (struct file *file, unsigned int depth);
+
+
+/* The test for circular dependencies is based on the 'updating' bit in
+   'struct file'.  However, double colon targets have separate 'struct
+   file's; make sure we always use the base of the double colon chain. */
+
+#define start_updating(_f)  (((_f)->double_colon ? (_f)->double_colon : (_f))\
+                             ->updating = 1)
+#define finish_updating(_f) (((_f)->double_colon ? (_f)->double_colon : (_f))\
+                             ->updating = 0)
+#define is_updating(_f)     (((_f)->double_colon ? (_f)->double_colon : (_f))\
+                             ->updating)
+
+
+/* Incremented when a command is started (under -n, when one would be).  */
+unsigned int commands_started = 0;
+
+/* Current value for pruning the scan of the goal chain (toggle 0/1).  */
+static unsigned int considered;
+
+static enum update_status update_file (struct file *file, unsigned int depth);
+static enum update_status update_file_1 (struct file *file, unsigned int depth);
+static enum update_status check_dep (struct file *file, unsigned int depth,
+                                     FILE_TIMESTAMP this_mtime, int *must_make);
+static enum update_status touch_file (struct file *file);
+static void remake_file (struct file *file);
+static FILE_TIMESTAMP name_mtime (const char *name);
+static const char *library_search (const char *lib, FILE_TIMESTAMP *mtime_ptr);
+
+
+/* Remake all the goals in the 'struct dep' chain GOALS.  Return -1 if nothing
+   was done, 0 if all goals were updated successfully, or 1 if a goal failed.
+
+   If rebuilding_makefiles is nonzero, these goals are makefiles, so -t, -q,
+   and -n should be disabled for them unless they were also command-line
+   targets, and we should only make one goal at a time and return as soon as
+   one goal whose 'changed' member is nonzero is successfully made.  */
+
+enum update_status
+update_goal_chain (struct dep *goals)
+{
+  int t = touch_flag, q = question_flag, n = just_print_flag;
+  enum update_status status = us_none;
+
+#define MTIME(file) (rebuilding_makefiles ? file_mtime_no_search (file) \
+                     : file_mtime (file))
+
+  /* Duplicate the chain so we can remove things from it.  */
+
+  goals = copy_dep_chain (goals);
+
+  {
+    /* Clear the 'changed' flag of each goal in the chain.
+       We will use the flag below to notice when any commands
+       have actually been run for a target.  When no commands
+       have been run, we give an "up to date" diagnostic.  */
+
+    struct dep *g;
+    for (g = goals; g != 0; g = g->next)
+      g->changed = 0;
+  }
+
+  /* All files start with the considered bit 0, so the global value is 1.  */
+  considered = 1;
+
+  /* Update all the goals until they are all finished.  */
+
+  while (goals != 0)
+    {
+      register struct dep *g, *lastgoal;
+
+      /* Start jobs that are waiting for the load to go down.  */
+
+      start_waiting_jobs ();
+
+      /* Wait for a child to die.  */
+
+      reap_children (1, 0);
+
+      lastgoal = 0;
+      g = goals;
+      while (g != 0)
+        {
+          /* Iterate over all double-colon entries for this file.  */
+          struct file *file;
+          int stop = 0, any_not_updated = 0;
+
+          for (file = g->file->double_colon ? g->file->double_colon : g->file;
+               file != NULL;
+               file = file->prev)
+            {
+              unsigned int ocommands_started;
+              enum update_status fail;
+
+              file->dontcare = g->dontcare;
+
+              check_renamed (file);
+              if (rebuilding_makefiles)
+                {
+                  if (file->cmd_target)
+                    {
+                      touch_flag = t;
+                      question_flag = q;
+                      just_print_flag = n;
+                    }
+                  else
+                    touch_flag = question_flag = just_print_flag = 0;
+                }
+
+              /* Save the old value of 'commands_started' so we can compare
+                 later.  It will be incremented when any commands are
+                 actually run.  */
+              ocommands_started = commands_started;
+
+              fail = update_file (file, rebuilding_makefiles ? 1 : 0);
+              check_renamed (file);
+
+              /* Set the goal's 'changed' flag if any commands were started
+                 by calling update_file above.  We check this flag below to
+                 decide when to give an "up to date" diagnostic.  */
+              if (commands_started > ocommands_started)
+                g->changed = 1;
+
+              stop = 0;
+              if ((fail || file->updated) && status < us_question)
+                {
+                  /* We updated this goal.  Update STATUS and decide whether
+                     to stop.  */
+                  if (file->update_status)
+                    {
+                      /* Updating failed, or -q triggered.  The STATUS value
+                         tells our caller which.  */
+                      status = file->update_status;
+                      /* If -q just triggered, stop immediately.  It doesn't
+                         matter how much more we run, since we already know
+                         the answer to return.  */
+                      stop = (question_flag && !keep_going_flag
+                              && !rebuilding_makefiles);
+                    }
+                  else
+                    {
+                      FILE_TIMESTAMP mtime = MTIME (file);
+                      check_renamed (file);
+
+                      if (file->updated && g->changed &&
+                           mtime != file->mtime_before_update)
+                        {
+                          /* Updating was done.  If this is a makefile and
+                             just_print_flag or question_flag is set (meaning
+                             -n or -q was given and this file was specified
+                             as a command-line target), don't change STATUS.
+                             If STATUS is changed, we will get re-exec'd, and
+                             enter an infinite loop.  */
+                          if (!rebuilding_makefiles
+                              || (!just_print_flag && !question_flag))
+                            status = us_success;
+                          if (rebuilding_makefiles && file->dontcare)
+                            /* This is a default makefile; stop remaking.  */
+                            stop = 1;
+                        }
+                    }
+                }
+
+              /* Keep track if any double-colon entry is not finished.
+                 When they are all finished, the goal is finished.  */
+              any_not_updated |= !file->updated;
+
+              file->dontcare = 0;
+
+              if (stop)
+                break;
+            }
+
+          /* Reset FILE since it is null at the end of the loop.  */
+          file = g->file;
+
+          if (stop || !any_not_updated)
+            {
+              /* If we have found nothing whatever to do for the goal,
+                 print a message saying nothing needs doing.  */
+
+              if (!rebuilding_makefiles
+                  /* If the update_status is success, we updated successfully
+                     or not at all.  G->changed will have been set above if
+                     any commands were actually started for this goal.  */
+                  && file->update_status == us_success && !g->changed
+                  /* Never give a message under -s or -q.  */
+                  && !silent_flag && !question_flag)
+                OS (message, 1, ((file->phony || file->cmds == 0)
+                                 ? _("Nothing to be done for '%s'.")
+                                 : _("'%s' is up to date.")),
+                    file->name);
+
+              /* This goal is finished.  Remove it from the chain.  */
+              if (lastgoal == 0)
+                goals = g->next;
+              else
+                lastgoal->next = g->next;
+
+              /* Free the storage.  */
+              free (g);
+
+              g = lastgoal == 0 ? goals : lastgoal->next;
+
+              if (stop)
+                break;
+            }
+          else
+            {
+              lastgoal = g;
+              g = g->next;
+            }
+        }
+
+      /* If we reached the end of the dependency graph toggle the considered
+         flag for the next pass.  */
+      if (g == 0)
+        considered = !considered;
+    }
+
+  if (rebuilding_makefiles)
+    {
+      touch_flag = t;
+      question_flag = q;
+      just_print_flag = n;
+    }
+
+  return status;
+}
+
+/* If FILE is not up to date, execute the commands for it.
+   Return 0 if successful, non-0 if unsuccessful;
+   but with some flag settings, just call 'exit' if unsuccessful.
+
+   DEPTH is the depth in recursions of this function.
+   We increment it during the consideration of our dependencies,
+   then decrement it again after finding out whether this file
+   is out of date.
+
+   If there are multiple double-colon entries for FILE,
+   each is considered in turn.  */
+
+static enum update_status
+update_file (struct file *file, unsigned int depth)
+{
+  enum update_status status = us_success;
+  struct file *f;
+
+  f = file->double_colon ? file->double_colon : file;
+
+  /* Prune the dependency graph: if we've already been here on _this_
+     pass through the dependency graph, we don't have to go any further.
+     We won't reap_children until we start the next pass, so no state
+     change is possible below here until then.  */
+  if (f->considered == considered)
+    {
+      /* Check for the case where a target has been tried and failed but
+         the diagnostics haven't been issued. If we need the diagnostics
+         then we will have to continue. */
+      if (!(f->updated && f->update_status > us_none
+            && !f->dontcare && f->no_diag))
+        {
+          DBF (DB_VERBOSE, _("Pruning file '%s'.\n"));
+          return f->command_state == cs_finished ? f->update_status : 0;
+        }
+    }
+
+  /* This loop runs until we start commands for a double colon rule, or until
+     the chain is exhausted. */
+  for (; f != 0; f = f->prev)
+    {
+      enum update_status new;
+
+      f->considered = considered;
+
+      new = update_file_1 (f, depth);
+      check_renamed (f);
+
+      /* Clean up any alloca() used during the update.  */
+      alloca (0);
+
+      /* If we got an error, don't bother with double_colon etc.  */
+      if (new && !keep_going_flag)
+        return new;
+
+      if (f->command_state == cs_running
+          || f->command_state == cs_deps_running)
+        {
+          /* Don't run the other :: rules for this
+             file until this rule is finished.  */
+          status = us_success;
+          break;
+        }
+
+      if (new > status)
+        status = new;
+    }
+
+  /* Process the remaining rules in the double colon chain so they're marked
+     considered.  Start their prerequisites, too.  */
+  if (file->double_colon)
+    for (; f != 0 ; f = f->prev)
+      {
+        struct dep *d;
+
+        f->considered = considered;
+
+        for (d = f->deps; d != 0; d = d->next)
+          {
+            enum update_status new = update_file (d->file, depth + 1);
+            if (new > status)
+              new = status;
+          }
+      }
+
+  return status;
+}
+
+/* Show a message stating the target failed to build.  */
+
+static void
+complain (struct file *file)
+{
+  /* If this file has no_diag set then it means we tried to update it
+     before in the dontcare mode and failed. The target that actually
+     failed is not necessarily this file but could be one of its direct
+     or indirect dependencies. So traverse this file's dependencies and
+     find the one that actually caused the failure. */
+
+  struct dep *d;
+
+  for (d = file->deps; d != 0; d = d->next)
+    {
+      if (d->file->updated && d->file->update_status > us_none && file->no_diag)
+        {
+          complain (d->file);
+          break;
+        }
+    }
+
+  if (d == 0)
+    {
+      /* Didn't find any dependencies to complain about. */
+      if (file->parent)
+        {
+          size_t l = strlen (file->name) + strlen (file->parent->name) + 4;
+
+          if (!keep_going_flag)
+            fatal (NILF, l,
+                   _("%sNo rule to make target '%s', needed by '%s'%s"),
+                   "", file->name, file->parent->name, "");
+
+          error (NILF, l, _("%sNo rule to make target '%s', needed by '%s'%s"),
+                 "*** ", file->name, file->parent->name, ".");
+        }
+      else
+        {
+          size_t l = strlen (file->name) + 4;
+
+          if (!keep_going_flag)
+            fatal (NILF, l,
+                   _("%sNo rule to make target '%s'%s"), "", file->name, "");
+
+          error (NILF, l,
+                 _("%sNo rule to make target '%s'%s"), "*** ", file->name, ".");
+        }
+
+      file->no_diag = 0;
+    }
+}
+
+/* Consider a single 'struct file' and update it as appropriate.
+   Return 0 on success, or non-0 on failure.  */
+
+static enum update_status
+update_file_1 (struct file *file, unsigned int depth)
+{
+  enum update_status dep_status = us_success;
+  FILE_TIMESTAMP this_mtime;
+  int noexist, must_make, deps_changed;
+  struct file *ofile;
+  struct dep *d, *ad;
+  struct dep amake;
+  int running = 0;
+
+  DBF (DB_VERBOSE, _("Considering target file '%s'.\n"));
+
+  if (file->updated)
+    {
+      if (file->update_status > us_none)
+        {
+          DBF (DB_VERBOSE,
+               _("Recently tried and failed to update file '%s'.\n"));
+
+          /* If the file we tried to make is marked no_diag then no message
+             was printed about it when it failed during the makefile rebuild.
+             If we're trying to build it again in the normal rebuild, print a
+             message now.  */
+          if (file->no_diag && !file->dontcare)
+              complain (file);
+
+          return file->update_status;
+        }
+
+      DBF (DB_VERBOSE, _("File '%s' was considered already.\n"));
+      return 0;
+    }
+
+  switch (file->command_state)
+    {
+    case cs_not_started:
+    case cs_deps_running:
+      break;
+    case cs_running:
+      DBF (DB_VERBOSE, _("Still updating file '%s'.\n"));
+      return 0;
+    case cs_finished:
+      DBF (DB_VERBOSE, _("Finished updating file '%s'.\n"));
+      return file->update_status;
+    default:
+      abort ();
+    }
+
+  /* Determine whether the diagnostics will be issued should this update
+     fail. */
+  file->no_diag = file->dontcare;
+
+  ++depth;
+
+  /* Notice recursive update of the same file.  */
+  start_updating (file);
+
+  /* We might change file if we find a different one via vpath;
+     remember this one to turn off updating.  */
+  ofile = file;
+
+  /* Looking at the file's modtime beforehand allows the possibility
+     that its name may be changed by a VPATH search, and thus it may
+     not need an implicit rule.  If this were not done, the file
+     might get implicit commands that apply to its initial name, only
+     to have that name replaced with another found by VPATH search.  */
+
+  this_mtime = file_mtime (file);
+  check_renamed (file);
+  noexist = this_mtime == NONEXISTENT_MTIME;
+  if (noexist)
+    DBF (DB_BASIC, _("File '%s' does not exist.\n"));
+  else if (ORDINARY_MTIME_MIN <= this_mtime && this_mtime <= ORDINARY_MTIME_MAX
+           && file->low_resolution_time)
+    {
+      /* Avoid spurious rebuilds due to low resolution time stamps.  */
+      int ns = FILE_TIMESTAMP_NS (this_mtime);
+      if (ns != 0)
+        OS (error, NILF,
+            _("*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"),
+            file->name);
+      this_mtime += FILE_TIMESTAMPS_PER_S - 1 - ns;
+    }
+
+  must_make = noexist;
+
+  /* If file was specified as a target with no commands,
+     come up with some default commands.  */
+
+  if (!file->phony && file->cmds == 0 && !file->tried_implicit)
+    {
+      if (try_implicit_rule (file, depth))
+        DBF (DB_IMPLICIT, _("Found an implicit rule for '%s'.\n"));
+      else
+        DBF (DB_IMPLICIT, _("No implicit rule found for '%s'.\n"));
+      file->tried_implicit = 1;
+    }
+  if (file->cmds == 0 && !file->is_target
+      && default_file != 0 && default_file->cmds != 0)
+    {
+      DBF (DB_IMPLICIT, _("Using default recipe for '%s'.\n"));
+      file->cmds = default_file->cmds;
+    }
+
+  /* Update all non-intermediate files we depend on, if necessary, and see
+     whether any of them is more recent than this file.  We need to walk our
+     deps, AND the deps of any also_make targets to ensure everything happens
+     in the correct order.  */
+
+  amake.file = file;
+  amake.next = file->also_make;
+  ad = &amake;
+  while (ad)
+    {
+      struct dep *lastd = 0;
+
+      /* Find the deps we're scanning */
+      d = ad->file->deps;
+      ad = ad->next;
+
+      while (d)
+        {
+          enum update_status new;
+          FILE_TIMESTAMP mtime;
+          int maybe_make;
+          int dontcare = 0;
+
+          check_renamed (d->file);
+
+          mtime = file_mtime (d->file);
+          check_renamed (d->file);
+
+          if (is_updating (d->file))
+            {
+              OSS (error, NILF, _("Circular %s <- %s dependency dropped."),
+                   file->name, d->file->name);
+              /* We cannot free D here because our the caller will still have
+                 a reference to it when we were called recursively via
+                 check_dep below.  */
+              if (lastd == 0)
+                file->deps = d->next;
+              else
+                lastd->next = d->next;
+              d = d->next;
+              continue;
+            }
+
+          d->file->parent = file;
+          maybe_make = must_make;
+
+          /* Inherit dontcare flag from our parent. */
+          if (rebuilding_makefiles)
+            {
+              dontcare = d->file->dontcare;
+              d->file->dontcare = file->dontcare;
+            }
+
+          new = check_dep (d->file, depth, this_mtime, &maybe_make);
+          if (new > dep_status)
+            dep_status = new;
+
+          /* Restore original dontcare flag. */
+          if (rebuilding_makefiles)
+            d->file->dontcare = dontcare;
+
+          if (! d->ignore_mtime)
+            must_make = maybe_make;
+
+          check_renamed (d->file);
+
+          {
+            register struct file *f = d->file;
+            if (f->double_colon)
+              f = f->double_colon;
+            do
+              {
+                running |= (f->command_state == cs_running
+                            || f->command_state == cs_deps_running);
+                f = f->prev;
+              }
+            while (f != 0);
+          }
+
+          if (dep_status && !keep_going_flag)
+            break;
+
+          if (!running)
+            /* The prereq is considered changed if the timestamp has changed while
+               it was built, OR it doesn't exist.  */
+            d->changed = ((file_mtime (d->file) != mtime)
+                          || (mtime == NONEXISTENT_MTIME));
+
+          lastd = d;
+          d = d->next;
+        }
+    }
+
+  /* Now we know whether this target needs updating.
+     If it does, update all the intermediate files we depend on.  */
+
+  if (must_make || always_make_flag)
+    {
+      for (d = file->deps; d != 0; d = d->next)
+        if (d->file->intermediate)
+          {
+            enum update_status new;
+            int dontcare = 0;
+
+            FILE_TIMESTAMP mtime = file_mtime (d->file);
+            check_renamed (d->file);
+            d->file->parent = file;
+
+            /* Inherit dontcare flag from our parent. */
+            if (rebuilding_makefiles)
+              {
+                dontcare = d->file->dontcare;
+                d->file->dontcare = file->dontcare;
+              }
+
+            /* We may have already considered this file, when we didn't know
+               we'd need to update it.  Force update_file() to consider it and
+               not prune it.  */
+            d->file->considered = !considered;
+
+            new = update_file (d->file, depth);
+            if (new > dep_status)
+              dep_status = new;
+
+            /* Restore original dontcare flag. */
+            if (rebuilding_makefiles)
+              d->file->dontcare = dontcare;
+
+            check_renamed (d->file);
+
+            {
+              register struct file *f = d->file;
+              if (f->double_colon)
+                f = f->double_colon;
+              do
+                {
+                  running |= (f->command_state == cs_running
+                              || f->command_state == cs_deps_running);
+                  f = f->prev;
+                }
+              while (f != 0);
+            }
+
+            if (dep_status && !keep_going_flag)
+              break;
+
+            if (!running)
+              d->changed = ((file->phony && file->cmds != 0)
+                            || file_mtime (d->file) != mtime);
+          }
+    }
+
+  finish_updating (file);
+  finish_updating (ofile);
+
+  DBF (DB_VERBOSE, _("Finished prerequisites of target file '%s'.\n"));
+
+  if (running)
+    {
+      set_command_state (file, cs_deps_running);
+      --depth;
+      DBF (DB_VERBOSE, _("The prerequisites of '%s' are being made.\n"));
+      return 0;
+    }
+
+  /* If any dependency failed, give up now.  */
+
+  if (dep_status)
+    {
+      /* I'm not sure if we can't just assign dep_status...  */
+      file->update_status = dep_status == us_none ? us_failed : dep_status;
+      notice_finished_file (file);
+
+      --depth;
+
+      DBF (DB_VERBOSE, _("Giving up on target file '%s'.\n"));
+
+      if (depth == 0 && keep_going_flag
+          && !just_print_flag && !question_flag)
+        OS (error, NILF,
+            _("Target '%s' not remade because of errors."), file->name);
+
+      return dep_status;
+    }
+
+  if (file->command_state == cs_deps_running)
+    /* The commands for some deps were running on the last iteration, but
+       they have finished now.  Reset the command_state to not_started to
+       simplify later bookkeeping.  It is important that we do this only
+       when the prior state was cs_deps_running, because that prior state
+       was definitely propagated to FILE's also_make's by set_command_state
+       (called above), but in another state an also_make may have
+       independently changed to finished state, and we would confuse that
+       file's bookkeeping (updated, but not_started is bogus state).  */
+    set_command_state (file, cs_not_started);
+
+  /* Now record which prerequisites are more
+     recent than this file, so we can define $?.  */
+
+  deps_changed = 0;
+  for (d = file->deps; d != 0; d = d->next)
+    {
+      FILE_TIMESTAMP d_mtime = file_mtime (d->file);
+      check_renamed (d->file);
+
+      if (! d->ignore_mtime)
+        {
+#if 1
+          /* %%% In version 4, remove this code completely to
+           implement not remaking deps if their deps are newer
+           than their parents.  */
+          if (d_mtime == NONEXISTENT_MTIME && !d->file->intermediate)
+            /* We must remake if this dep does not
+               exist and is not intermediate.  */
+            must_make = 1;
+#endif
+
+          /* Set DEPS_CHANGED if this dep actually changed.  */
+          deps_changed |= d->changed;
+        }
+
+      /* Set D->changed if either this dep actually changed,
+         or its dependent, FILE, is older or does not exist.  */
+      d->changed |= noexist || d_mtime > this_mtime;
+
+      if (!noexist && ISDB (DB_BASIC|DB_VERBOSE))
+        {
+          const char *fmt = 0;
+
+          if (d->ignore_mtime)
+            {
+              if (ISDB (DB_VERBOSE))
+                fmt = _("Prerequisite '%s' is order-only for target '%s'.\n");
+            }
+          else if (d_mtime == NONEXISTENT_MTIME)
+            {
+              if (ISDB (DB_BASIC))
+                fmt = _("Prerequisite '%s' of target '%s' does not exist.\n");
+            }
+          else if (d->changed)
+            {
+              if (ISDB (DB_BASIC))
+                fmt = _("Prerequisite '%s' is newer than target '%s'.\n");
+            }
+          else if (ISDB (DB_VERBOSE))
+            fmt = _("Prerequisite '%s' is older than target '%s'.\n");
+
+          if (fmt)
+            {
+              print_spaces (depth);
+              printf (fmt, dep_name (d), file->name);
+              fflush (stdout);
+            }
+        }
+    }
+
+  /* Here depth returns to the value it had when we were called.  */
+  depth--;
+
+  if (file->double_colon && file->deps == 0)
+    {
+      must_make = 1;
+      DBF (DB_BASIC,
+           _("Target '%s' is double-colon and has no prerequisites.\n"));
+    }
+  else if (!noexist && file->is_target && !deps_changed && file->cmds == 0
+           && !always_make_flag)
+    {
+      must_make = 0;
+      DBF (DB_VERBOSE,
+           _("No recipe for '%s' and no prerequisites actually changed.\n"));
+    }
+  else if (!must_make && file->cmds != 0 && always_make_flag)
+    {
+      must_make = 1;
+      DBF (DB_VERBOSE, _("Making '%s' due to always-make flag.\n"));
+    }
+
+  if (!must_make)
+    {
+      if (ISDB (DB_VERBOSE))
+        {
+          print_spaces (depth);
+          printf (_("No need to remake target '%s'"), file->name);
+          if (!streq (file->name, file->hname))
+              printf (_("; using VPATH name '%s'"), file->hname);
+          puts (".");
+          fflush (stdout);
+        }
+
+      notice_finished_file (file);
+
+      /* Since we don't need to remake the file, convert it to use the
+         VPATH filename if we found one.  hfile will be either the
+         local name if no VPATH or the VPATH name if one was found.  */
+
+      while (file)
+        {
+          file->name = file->hname;
+          file = file->prev;
+        }
+
+      return 0;
+    }
+
+  DBF (DB_BASIC, _("Must remake target '%s'.\n"));
+
+  /* It needs to be remade.  If it's VPATH and not reset via GPATH, toss the
+     VPATH.  */
+  if (!streq (file->name, file->hname))
+    {
+      DB (DB_BASIC, (_("  Ignoring VPATH name '%s'.\n"), file->hname));
+      file->ignore_vpath = 1;
+    }
+
+  /* Now, take appropriate actions to remake the file.  */
+  remake_file (file);
+
+  if (file->command_state != cs_finished)
+    {
+      DBF (DB_VERBOSE, _("Recipe of '%s' is being run.\n"));
+      return 0;
+    }
+
+  switch (file->update_status)
+    {
+    case us_failed:
+      DBF (DB_BASIC, _("Failed to remake target file '%s'.\n"));
+      break;
+    case us_success:
+      DBF (DB_BASIC, _("Successfully remade target file '%s'.\n"));
+      break;
+    case us_question:
+      DBF (DB_BASIC, _("Target file '%s' needs to be remade under -q.\n"));
+      break;
+    case us_none:
+      break;
+    }
+
+  file->updated = 1;
+  return file->update_status;
+}
+
+/* Set FILE's 'updated' flag and re-check its mtime and the mtime's of all
+   files listed in its 'also_make' member.  Under -t, this function also
+   touches FILE.
+
+   On return, FILE->update_status will no longer be us_none if it was.  */
+
+void
+notice_finished_file (struct file *file)
+{
+  struct dep *d;
+  int ran = file->command_state == cs_running;
+  int touched = 0;
+
+  file->command_state = cs_finished;
+  file->updated = 1;
+
+  if (touch_flag
+      /* The update status will be:
+           us_success   if 0 or more commands (+ or ${MAKE}) were run and won;
+           us_none      if this target was not remade;
+           >us_none     if some commands were run and lost.
+         We touch the target if it has commands which either were not run
+         or won when they ran (i.e. status is 0).  */
+      && file->update_status == us_success)
+    {
+      if (file->cmds != 0 && file->cmds->any_recurse)
+        {
+          /* If all the command lines were recursive,
+             we don't want to do the touching.  */
+          unsigned int i;
+          for (i = 0; i < file->cmds->ncommand_lines; ++i)
+            if (!(file->cmds->lines_flags[i] & COMMANDS_RECURSE))
+              goto have_nonrecursing;
+        }
+      else
+        {
+        have_nonrecursing:
+          if (file->phony)
+            file->update_status = us_success;
+          /* According to POSIX, -t doesn't affect targets with no cmds.  */
+          else if (file->cmds != 0)
+            {
+              /* Should set file's modification date and do nothing else.  */
+              file->update_status = touch_file (file);
+
+              /* Pretend we ran a real touch command, to suppress the
+                 "'foo' is up to date" message.  */
+              commands_started++;
+
+              /* Request for the timestamp to be updated (and distributed
+                 to the double-colon entries). Simply setting ran=1 would
+                 almost have done the trick, but messes up with the also_make
+                 updating logic below.  */
+              touched = 1;
+            }
+        }
+    }
+
+  if (file->mtime_before_update == UNKNOWN_MTIME)
+    file->mtime_before_update = file->last_mtime;
+
+  if ((ran && !file->phony) || touched)
+    {
+      int i = 0;
+
+      /* If -n, -t, or -q and all the commands are recursive, we ran them so
+         really check the target's mtime again.  Otherwise, assume the target
+         would have been updated. */
+
+      if ((question_flag || just_print_flag || touch_flag) && file->cmds)
+        {
+          for (i = file->cmds->ncommand_lines; i > 0; --i)
+            if (! (file->cmds->lines_flags[i-1] & COMMANDS_RECURSE))
+              break;
+        }
+
+      /* If there were no commands at all, it's always new. */
+
+      else if (file->is_target && file->cmds == 0)
+        i = 1;
+
+      file->last_mtime = i == 0 ? UNKNOWN_MTIME : NEW_MTIME;
+    }
+
+  if (file->double_colon)
+    {
+      /* If this is a double colon rule and it is the last one to be
+         updated, propagate the change of modification time to all the
+         double-colon entries for this file.
+
+         We do it on the last update because it is important to handle
+         individual entries as separate rules with separate timestamps
+         while they are treated as targets and then as one rule with the
+         unified timestamp when they are considered as a prerequisite
+         of some target.  */
+
+      struct file *f;
+      FILE_TIMESTAMP max_mtime = file->last_mtime;
+
+      /* Check that all rules were updated and at the same time find
+         the max timestamp.  We assume UNKNOWN_MTIME is newer then
+         any other value.  */
+      for (f = file->double_colon; f != 0 && f->updated; f = f->prev)
+        if (max_mtime != UNKNOWN_MTIME
+            && (f->last_mtime == UNKNOWN_MTIME || f->last_mtime > max_mtime))
+          max_mtime = f->last_mtime;
+
+      if (f == 0)
+        for (f = file->double_colon; f != 0; f = f->prev)
+          f->last_mtime = max_mtime;
+    }
+
+  if (ran && file->update_status != us_none)
+    /* We actually tried to update FILE, which has
+       updated its also_make's as well (if it worked).
+       If it didn't work, it wouldn't work again for them.
+       So mark them as updated with the same status.  */
+    for (d = file->also_make; d != 0; d = d->next)
+      {
+        d->file->command_state = cs_finished;
+        d->file->updated = 1;
+        d->file->update_status = file->update_status;
+
+        if (ran && !d->file->phony)
+          /* Fetch the new modification time.
+             We do this instead of just invalidating the cached time
+             so that a vpath_search can happen.  Otherwise, it would
+             never be done because the target is already updated.  */
+          f_mtime (d->file, 0);
+      }
+  else if (file->update_status == us_none)
+    /* Nothing was done for FILE, but it needed nothing done.
+       So mark it now as "succeeded".  */
+    file->update_status = us_success;
+}
+
+/* Check whether another file (whose mtime is THIS_MTIME) needs updating on
+   account of a dependency which is file FILE.  If it does, store 1 in
+   *MUST_MAKE_PTR.  In the process, update any non-intermediate files that
+   FILE depends on (including FILE itself).  Return nonzero if any updating
+   failed.  */
+
+static enum update_status
+check_dep (struct file *file, unsigned int depth,
+           FILE_TIMESTAMP this_mtime, int *must_make_ptr)
+{
+  struct file *ofile;
+  struct dep *d;
+  enum update_status dep_status = us_success;
+
+  ++depth;
+  start_updating (file);
+
+  /* We might change file if we find a different one via vpath;
+     remember this one to turn off updating.  */
+  ofile = file;
+
+  if (file->phony || !file->intermediate)
+    {
+      /* If this is a non-intermediate file, update it and record whether it
+         is newer than THIS_MTIME.  */
+      FILE_TIMESTAMP mtime;
+      dep_status = update_file (file, depth);
+      check_renamed (file);
+      mtime = file_mtime (file);
+      check_renamed (file);
+      if (mtime == NONEXISTENT_MTIME || mtime > this_mtime)
+        *must_make_ptr = 1;
+    }
+  else
+    {
+      /* FILE is an intermediate file.  */
+      FILE_TIMESTAMP mtime;
+
+      if (!file->phony && file->cmds == 0 && !file->tried_implicit)
+        {
+          if (try_implicit_rule (file, depth))
+            DBF (DB_IMPLICIT, _("Found an implicit rule for '%s'.\n"));
+          else
+            DBF (DB_IMPLICIT, _("No implicit rule found for '%s'.\n"));
+          file->tried_implicit = 1;
+        }
+      if (file->cmds == 0 && !file->is_target
+          && default_file != 0 && default_file->cmds != 0)
+        {
+          DBF (DB_IMPLICIT, _("Using default commands for '%s'.\n"));
+          file->cmds = default_file->cmds;
+        }
+
+      check_renamed (file);
+      mtime = file_mtime (file);
+      check_renamed (file);
+      if (mtime != NONEXISTENT_MTIME && mtime > this_mtime)
+        /* If the intermediate file actually exists and is newer, then we
+           should remake from it.  */
+        *must_make_ptr = 1;
+      else
+        {
+          /* Otherwise, update all non-intermediate files we depend on, if
+             necessary, and see whether any of them is more recent than the
+             file on whose behalf we are checking.  */
+          struct dep *ld;
+          int deps_running = 0;
+
+          /* If this target is not running, set it's state so that we check it
+             fresh.  It could be it was checked as part of an order-only
+             prerequisite and so wasn't rebuilt then, but should be now.  */
+          if (file->command_state != cs_running)
+            {
+              /* If the target was waiting for a dependency it has to be
+                 reconsidered, as that dependency might have finished.  */
+              if (file->command_state == cs_deps_running)
+                file->considered = !considered;
+
+              set_command_state (file, cs_not_started);
+            }
+
+          ld = 0;
+          d = file->deps;
+          while (d != 0)
+            {
+              enum update_status new;
+              int maybe_make;
+
+              if (is_updating (d->file))
+                {
+                  OSS (error, NILF, _("Circular %s <- %s dependency dropped."),
+                       file->name, d->file->name);
+                  if (ld == 0)
+                    {
+                      file->deps = d->next;
+                      free_dep (d);
+                      d = file->deps;
+                    }
+                  else
+                    {
+                      ld->next = d->next;
+                      free_dep (d);
+                      d = ld->next;
+                    }
+                  continue;
+                }
+
+              d->file->parent = file;
+              maybe_make = *must_make_ptr;
+              new = check_dep (d->file, depth, this_mtime, &maybe_make);
+              if (new > dep_status)
+                dep_status = new;
+
+              if (! d->ignore_mtime)
+                *must_make_ptr = maybe_make;
+              check_renamed (d->file);
+              if (dep_status && !keep_going_flag)
+                break;
+
+              if (d->file->command_state == cs_running
+                  || d->file->command_state == cs_deps_running)
+                deps_running = 1;
+
+              ld = d;
+              d = d->next;
+            }
+
+          if (deps_running)
+            /* Record that some of FILE's deps are still being made.
+               This tells the upper levels to wait on processing it until the
+               commands are finished.  */
+            set_command_state (file, cs_deps_running);
+        }
+    }
+
+  finish_updating (file);
+  finish_updating (ofile);
+
+  return dep_status;
+}
+
+/* Touch FILE.  Return us_success if successful, us_failed if not.  */
+
+#define TOUCH_ERROR(call) do{ perror_with_name ((call), file->name);    \
+                              return us_failed; }while(0)
+
+static enum update_status
+touch_file (struct file *file)
+{
+  if (!silent_flag)
+    OS (message, 0, "touch %s", file->name);
+
+  /* Print-only (-n) takes precedence over touch (-t).  */
+  if (just_print_flag)
+    return us_success;
+
+#ifndef NO_ARCHIVES
+  if (ar_name (file->name))
+    return ar_touch (file->name) ? us_failed : us_success;
+  else
+#endif
+    {
+      int fd = open (file->name, O_RDWR | O_CREAT, 0666);
+
+      if (fd < 0)
+        TOUCH_ERROR ("touch: open: ");
+      else
+        {
+          struct stat statbuf;
+          char buf = 'x';
+          int e;
+
+          EINTRLOOP (e, fstat (fd, &statbuf));
+          if (e < 0)
+            TOUCH_ERROR ("touch: fstat: ");
+          /* Rewrite character 0 same as it already is.  */
+          if (read (fd, &buf, 1) < 0)
+            TOUCH_ERROR ("touch: read: ");
+          if (lseek (fd, 0L, 0) < 0L)
+            TOUCH_ERROR ("touch: lseek: ");
+          if (write (fd, &buf, 1) < 0)
+            TOUCH_ERROR ("touch: write: ");
+          /* If file length was 0, we just
+             changed it, so change it back.  */
+          if (statbuf.st_size == 0)
+            {
+              (void) close (fd);
+              fd = open (file->name, O_RDWR | O_TRUNC, 0666);
+              if (fd < 0)
+                TOUCH_ERROR ("touch: open: ");
+            }
+          (void) close (fd);
+        }
+    }
+
+  return us_success;
+}
+
+/* Having checked and updated the dependencies of FILE,
+   do whatever is appropriate to remake FILE itself.
+   Return the status from executing FILE's commands.  */
+
+static void
+remake_file (struct file *file)
+{
+  if (file->cmds == 0)
+    {
+      if (file->phony)
+        /* Phony target.  Pretend it succeeded.  */
+        file->update_status = us_success;
+      else if (file->is_target)
+        /* This is a nonexistent target file we cannot make.
+           Pretend it was successfully remade.  */
+        file->update_status = us_success;
+      else
+        {
+          /* This is a dependency file we cannot remake.  Fail.  */
+          if (!rebuilding_makefiles || !file->dontcare)
+            complain (file);
+          file->update_status = us_failed;
+        }
+    }
+  else
+    {
+      chop_commands (file->cmds);
+
+      /* The normal case: start some commands.  */
+      if (!touch_flag || file->cmds->any_recurse)
+        {
+          execute_file_commands (file);
+          return;
+        }
+
+      /* This tells notice_finished_file it is ok to touch the file.  */
+      file->update_status = us_success;
+    }
+
+  /* This does the touching under -t.  */
+  notice_finished_file (file);
+}
+
+/* Return the mtime of a file, given a 'struct file'.
+   Caches the time in the struct file to avoid excess stat calls.
+
+   If the file is not found, and SEARCH is nonzero, VPATH searching and
+   replacement is done.  If that fails, a library (-lLIBNAME) is tried and
+   the library's actual name (/lib/libLIBNAME.a, etc.) is substituted into
+   FILE.  */
+
+FILE_TIMESTAMP
+f_mtime (struct file *file, int search)
+{
+  FILE_TIMESTAMP mtime;
+
+  /* File's mtime is not known; must get it from the system.  */
+
+#ifndef NO_ARCHIVES
+  if (ar_name (file->name))
+    {
+      /* This file is an archive-member reference.  */
+
+      char *arname, *memname;
+      struct file *arfile;
+      time_t member_date;
+
+      /* Find the archive's name.  */
+      ar_parse_name (file->name, &arname, &memname);
+
+      /* Find the modification time of the archive itself.
+         Also allow for its name to be changed via VPATH search.  */
+      arfile = lookup_file (arname);
+      if (arfile == 0)
+        arfile = enter_file (strcache_add (arname));
+      mtime = f_mtime (arfile, search);
+      check_renamed (arfile);
+      if (search && strcmp (arfile->hname, arname))
+        {
+          /* The archive's name has changed.
+             Change the archive-member reference accordingly.  */
+
+          char *name;
+          unsigned int arlen, memlen;
+
+          arlen = strlen (arfile->hname);
+          memlen = strlen (memname);
+
+          name = alloca (arlen + 1 + memlen + 2);
+          memcpy (name, arfile->hname, arlen);
+          name[arlen] = '(';
+          memcpy (name + arlen + 1, memname, memlen);
+          name[arlen + 1 + memlen] = ')';
+          name[arlen + 1 + memlen + 1] = '\0';
+
+          /* If the archive was found with GPATH, make the change permanent;
+             otherwise defer it until later.  */
+          if (arfile->name == arfile->hname)
+            rename_file (file, strcache_add (name));
+          else
+            rehash_file (file, strcache_add (name));
+          check_renamed (file);
+        }
+
+      free (arname);
+
+      file->low_resolution_time = 1;
+
+      if (mtime == NONEXISTENT_MTIME)
+        /* The archive doesn't exist, so its members don't exist either.  */
+        return NONEXISTENT_MTIME;
+
+      member_date = ar_member_date (file->hname);
+      mtime = (member_date == (time_t) -1
+               ? NONEXISTENT_MTIME
+               : file_timestamp_cons (file->hname, member_date, 0));
+    }
+  else
+#endif
+    {
+      mtime = name_mtime (file->name);
+
+      if (mtime == NONEXISTENT_MTIME && search && !file->ignore_vpath)
+        {
+          /* If name_mtime failed, search VPATH.  */
+          const char *name = vpath_search (file->name, &mtime, NULL, NULL);
+          if (name
+              /* Last resort, is it a library (-lxxx)?  */
+              || (file->name[0] == '-' && file->name[1] == 'l'
+                  && (name = library_search (file->name, &mtime)) != 0))
+            {
+              if (mtime != UNKNOWN_MTIME)
+                /* vpath_search and library_search store UNKNOWN_MTIME
+                   if they didn't need to do a stat call for their work.  */
+                file->last_mtime = mtime;
+
+              /* If we found it in VPATH, see if it's in GPATH too; if so,
+                 change the name right now; if not, defer until after the
+                 dependencies are updated. */
+              if (gpath_search (name, strlen (name) - strlen (file->name) - 1))
+                {
+                  rename_file (file, name);
+                  check_renamed (file);
+                  return file_mtime (file);
+                }
+
+              rehash_file (file, name);
+              check_renamed (file);
+              /* If the result of a vpath search is -o or -W, preserve it.
+                 Otherwise, find the mtime of the resulting file.  */
+              if (mtime != OLD_MTIME && mtime != NEW_MTIME)
+                mtime = name_mtime (name);
+            }
+        }
+    }
+
+  /* Files can have bogus timestamps that nothing newly made will be
+     "newer" than.  Updating their dependents could just result in loops.
+     So notify the user of the anomaly with a warning.
+
+     We only need to do this once, for now. */
+
+  if (!clock_skew_detected
+      && mtime != NONEXISTENT_MTIME && mtime != NEW_MTIME
+      && !file->updated)
+    {
+      static FILE_TIMESTAMP adjusted_now;
+
+      FILE_TIMESTAMP adjusted_mtime = mtime;
+
+#if defined(WINDOWS32) || defined(__MSDOS__)
+      /* Experimentation has shown that FAT filesystems can set file times
+         up to 3 seconds into the future!  Play it safe.  */
+
+#define FAT_ADJ_OFFSET  (FILE_TIMESTAMP) 3
+
+      FILE_TIMESTAMP adjustment = FAT_ADJ_OFFSET << FILE_TIMESTAMP_LO_BITS;
+      if (ORDINARY_MTIME_MIN + adjustment <= adjusted_mtime)
+        adjusted_mtime -= adjustment;
+#elif defined(__EMX__)
+      /* FAT filesystems round time to the nearest even second!
+         Allow for any file (NTFS or FAT) to perhaps suffer from this
+         brain damage.  */
+      FILE_TIMESTAMP adjustment = (((FILE_TIMESTAMP_S (adjusted_mtime) & 1) == 0
+                     && FILE_TIMESTAMP_NS (adjusted_mtime) == 0)
+                    ? (FILE_TIMESTAMP) 1 << FILE_TIMESTAMP_LO_BITS
+                    : 0);
+#endif
+
+      /* If the file's time appears to be in the future, update our
+         concept of the present and try once more.  */
+      if (adjusted_now < adjusted_mtime)
+        {
+          int resolution;
+          FILE_TIMESTAMP now = file_timestamp_now (&resolution);
+          adjusted_now = now + (resolution - 1);
+          if (adjusted_now < adjusted_mtime)
+            {
+#ifdef NO_FLOAT
+              OS (error, NILF,
+                  _("Warning: File '%s' has modification time in the future"),
+                  file->name);
+#else
+              double from_now =
+                (FILE_TIMESTAMP_S (mtime) - FILE_TIMESTAMP_S (now)
+                 + ((FILE_TIMESTAMP_NS (mtime) - FILE_TIMESTAMP_NS (now))
+                    / 1e9));
+              char from_now_string[100];
+
+              if (from_now >= 99 && from_now <= ULONG_MAX)
+                sprintf (from_now_string, "%lu", (unsigned long) from_now);
+              else
+                sprintf (from_now_string, "%.2g", from_now);
+              OSS (error, NILF,
+                   _("Warning: File '%s' has modification time %s s in the future"),
+                   file->name, from_now_string);
+#endif
+              clock_skew_detected = 1;
+            }
+        }
+    }
+
+  /* Store the mtime into all the entries for this file.  */
+  if (file->double_colon)
+    file = file->double_colon;
+
+  do
+    {
+      /* If this file is not implicit but it is intermediate then it was
+         made so by the .INTERMEDIATE target.  If this file has never
+         been built by us but was found now, it existed before make
+         started.  So, turn off the intermediate bit so make doesn't
+         delete it, since it didn't create it.  */
+      if (mtime != NONEXISTENT_MTIME && file->command_state == cs_not_started
+          && !file->tried_implicit && file->intermediate)
+        file->intermediate = 0;
+
+      file->last_mtime = mtime;
+      file = file->prev;
+    }
+  while (file != 0);
+
+  return mtime;
+}
+
+
+/* Return the mtime of the file or archive-member reference NAME.  */
+
+/* First, we check with stat().  If the file does not exist, then we return
+   NONEXISTENT_MTIME.  If it does, and the symlink check flag is set, then
+   examine each indirection of the symlink and find the newest mtime.
+   This causes one duplicate stat() when -L is being used, but the code is
+   much cleaner.  */
+
+static FILE_TIMESTAMP
+name_mtime (const char *name)
+{
+  FILE_TIMESTAMP mtime;
+  struct stat st;
+  int e;
+
+  EINTRLOOP (e, stat (name, &st));
+  if (e == 0)
+    mtime = FILE_TIMESTAMP_STAT_MODTIME (name, st);
+  else if (errno == ENOENT || errno == ENOTDIR)
+    mtime = NONEXISTENT_MTIME;
+  else
+    {
+      perror_with_name ("stat: ", name);
+      return NONEXISTENT_MTIME;
+    }
+
+  /* If we get here we either found it, or it doesn't exist.
+     If it doesn't exist see if we can use a symlink mtime instead.  */
+
+#ifdef MAKE_SYMLINKS
+#ifndef S_ISLNK
+# define S_ISLNK(_m)     (((_m)&S_IFMT)==S_IFLNK)
+#endif
+  if (check_symlink_flag)
+    {
+      PATH_VAR (lpath);
+
+      /* Check each symbolic link segment (if any).  Find the latest mtime
+         amongst all of them (and the target file of course).
+         Note that we have already successfully dereferenced all the links
+         above.  So, if we run into any error trying to lstat(), or
+         readlink(), or whatever, something bizarre-o happened.  Just give up
+         and use whatever mtime we've already computed at that point.  */
+      strcpy (lpath, name);
+      while (1)
+        {
+          FILE_TIMESTAMP ltime;
+          PATH_VAR (lbuf);
+          long llen;
+          char *p;
+
+          EINTRLOOP (e, lstat (lpath, &st));
+          if (e)
+            {
+              /* Just take what we have so far.  */
+              if (errno != ENOENT && errno != ENOTDIR)
+                perror_with_name ("lstat: ", lpath);
+              break;
+            }
+
+          /* If this is not a symlink, we're done (we started with the real
+             file's mtime so we don't need to test it again).  */
+          if (!S_ISLNK (st.st_mode))
+            break;
+
+          /* If this mtime is newer than what we had, keep the new one.  */
+          ltime = FILE_TIMESTAMP_STAT_MODTIME (lpath, st);
+          if (ltime > mtime)
+            mtime = ltime;
+
+          /* Set up to check the file pointed to by this link.  */
+          EINTRLOOP (llen, readlink (lpath, lbuf, GET_PATH_MAX));
+          if (llen < 0)
+            {
+              /* Eh?  Just take what we have.  */
+              perror_with_name ("readlink: ", lpath);
+              break;
+            }
+          lbuf[llen] = '\0';
+
+          /* If the target is fully-qualified or the source is just a
+             filename, then the new path is the target.  Otherwise it's the
+             source directory plus the target.  */
+          if (lbuf[0] == '/' || (p = strrchr (lpath, '/')) == NULL)
+            strcpy (lpath, lbuf);
+          else if ((p - lpath) + llen + 2 > GET_PATH_MAX)
+            /* Eh?  Path too long!  Again, just go with what we have.  */
+            break;
+          else
+            /* Create the next step in the symlink chain.  */
+            strcpy (p+1, lbuf);
+        }
+    }
+#endif
+
+  return mtime;
+}
+
+
+/* Search for a library file specified as -lLIBNAME, searching for a
+   suitable library file in the system library directories and the VPATH
+   directories.  */
+
+static const char *
+library_search (const char *lib, FILE_TIMESTAMP *mtime_ptr)
+{
+  static const char *dirs[] =
+    {
+#ifndef _AMIGA
+      "/lib",
+      "/usr/lib",
+#endif
+#if defined(WINDOWS32) && !defined(LIBDIR)
+/*
+ * This is completely up to the user at product install time. Just define
+ * a placeholder.
+ */
+#define LIBDIR "."
+#endif
+      LIBDIR,                   /* Defined by configuration.  */
+      0
+    };
+
+  const char *file = 0;
+  char *libpatterns;
+  FILE_TIMESTAMP mtime;
+
+  /* Loop variables for the libpatterns value.  */
+  char *p;
+  const char *p2;
+  unsigned int len;
+  unsigned int liblen;
+
+  /* Information about the earliest (in the vpath sequence) match.  */
+  unsigned int best_vpath = 0, best_path = 0;
+
+  const char **dp;
+
+  libpatterns = xstrdup (variable_expand ("$(.LIBPATTERNS)"));
+
+  /* Skip the '-l'.  */
+  lib += 2;
+  liblen = strlen (lib);
+
+  /* Loop through all the patterns in .LIBPATTERNS, and search on each one.
+     To implement the linker-compatible behavior we have to search through
+     all entries in .LIBPATTERNS and choose the "earliest" one.  */
+  p2 = libpatterns;
+  while ((p = find_next_token (&p2, &len)) != 0)
+    {
+      static char *buf = NULL;
+      static unsigned int buflen = 0;
+      static int libdir_maxlen = -1;
+      static unsigned int std_dirs = 0;
+      char *libbuf = variable_expand ("");
+
+      /* Expand the pattern using LIB as a replacement.  */
+      {
+        char c = p[len];
+        char *p3, *p4;
+
+        p[len] = '\0';
+        p3 = find_percent (p);
+        if (!p3)
+          {
+            /* Give a warning if there is no pattern.  */
+            OS (error, NILF,
+                _(".LIBPATTERNS element '%s' is not a pattern"), p);
+            p[len] = c;
+            continue;
+          }
+        p4 = variable_buffer_output (libbuf, p, p3-p);
+        p4 = variable_buffer_output (p4, lib, liblen);
+        p4 = variable_buffer_output (p4, p3+1, len - (p3-p));
+        p[len] = c;
+      }
+
+      /* Look first for 'libNAME.a' in the current directory.  */
+      mtime = name_mtime (libbuf);
+      if (mtime != NONEXISTENT_MTIME)
+        {
+          if (mtime_ptr != 0)
+            *mtime_ptr = mtime;
+          file = strcache_add (libbuf);
+          /* This by definition will have the best index, so stop now.  */
+          break;
+        }
+
+      /* Now try VPATH search on that.  */
+
+      {
+        unsigned int vpath_index, path_index;
+        const char* f = vpath_search (libbuf, mtime_ptr ? &mtime : NULL,
+                                      &vpath_index, &path_index);
+        if (f)
+          {
+            /* If we have a better match, record it.  */
+            if (file == 0 ||
+                vpath_index < best_vpath ||
+                (vpath_index == best_vpath && path_index < best_path))
+              {
+                file = f;
+                best_vpath = vpath_index;
+                best_path = path_index;
+
+                if (mtime_ptr != 0)
+                  *mtime_ptr = mtime;
+              }
+          }
+      }
+
+      /* Now try the standard set of directories.  */
+
+      if (!buflen)
+        {
+          for (dp = dirs; *dp != 0; ++dp)
+            {
+              int l = strlen (*dp);
+              if (l > libdir_maxlen)
+                libdir_maxlen = l;
+              std_dirs++;
+            }
+          buflen = strlen (libbuf);
+          buf = xmalloc (libdir_maxlen + buflen + 2);
+        }
+      else if (buflen < strlen (libbuf))
+        {
+          buflen = strlen (libbuf);
+          buf = xrealloc (buf, libdir_maxlen + buflen + 2);
+        }
+
+      {
+        /* Use the last std_dirs index for standard directories. This
+           was it will always be greater than the VPATH index.  */
+        unsigned int vpath_index = ~((unsigned int)0) - std_dirs;
+
+        for (dp = dirs; *dp != 0; ++dp)
+          {
+            sprintf (buf, "%s/%s", *dp, libbuf);
+            mtime = name_mtime (buf);
+            if (mtime != NONEXISTENT_MTIME)
+              {
+                if (file == 0 || vpath_index < best_vpath)
+                  {
+                    file = strcache_add (buf);
+                    best_vpath = vpath_index;
+
+                    if (mtime_ptr != 0)
+                      *mtime_ptr = mtime;
+                  }
+              }
+
+            vpath_index++;
+          }
+      }
+
+    }
+
+  free (libpatterns);
+  return file;
+}
diff --git a/remote-cstms.c b/remote-cstms.c
new file mode 100644
index 0000000..867ee8d
--- /dev/null
+++ b/remote-cstms.c
@@ -0,0 +1,300 @@
+/* GNU Make remote job exportation interface to the Customs daemon.
+   THIS CODE IS NOT SUPPORTED BY THE GNU PROJECT.
+   Please do not send bug reports or questions about it to
+   the Make maintainers.
+
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "commands.h"
+#include "job.h"
+#include "debug.h"
+
+#include <sys/time.h>
+#include <netdb.h>
+
+#include "customs.h"
+
+char *remote_description = "Customs";
+
+/* File name of the Customs 'export' client command.
+   A full path name can be used to avoid some path-searching overhead.  */
+#define EXPORT_COMMAND  "/usr/local/bin/export"
+
+/* ExportPermit gotten by start_remote_job_p, and used by start_remote_job.  */
+static ExportPermit permit;
+
+/* Normalized path name of the current directory.  */
+static char *normalized_cwd;
+
+/* Call once at startup even if no commands are run.  */
+
+void
+remote_setup (void)
+{
+}
+
+/* Called before exit.  */
+
+void
+remote_cleanup (void)
+{
+}
+
+/* Return nonzero if the next job should be done remotely.  */
+
+int
+start_remote_job_p (int first_p)
+{
+  static int inited = 0;
+  int status;
+  int njobs;
+
+  if (!inited)
+    {
+      /* Allow the user to turn off job exportation (useful while he is
+         debugging Customs, for example).  */
+      if (getenv ("GNU_MAKE_NO_CUSTOMS") != 0)
+        {
+          inited = -1;
+          return 0;
+        }
+
+      /* For secure Customs, make is installed setuid root and
+         Customs requires a privileged source port be used.  */
+      make_access ();
+
+      if (ISDB (DB_JOBS))
+        Rpc_Debug (1);
+
+      /* Ping the daemon once to see if it is there.  */
+      inited = Customs_Ping () == RPC_SUCCESS ? 1 : -1;
+
+      /* Return to normal user access.  */
+      user_access ();
+
+      if (starting_directory == 0)
+        /* main couldn't figure it out.  */
+        inited = -1;
+      else
+        {
+          /* Normalize the current directory path name to something
+             that should work on all machines exported to.  */
+
+          normalized_cwd = xmalloc (GET_PATH_MAX);
+          strcpy (normalized_cwd, starting_directory);
+          if (Customs_NormPath (normalized_cwd, GET_PATH_MAX) < 0)
+            /* Path normalization failure means using Customs
+               won't work, but it's not really an error.  */
+            inited = -1;
+        }
+    }
+
+  if (inited < 0)
+    return 0;
+
+  njobs = job_slots_used;
+  if (!first_p)
+    njobs -= 1;         /* correction for being called from reap_children() */
+
+  /* the first job should run locally, or, if the -l flag is given, we use
+     that as clue as to how many local jobs should be scheduled locally */
+  if (max_load_average < 0 && njobs == 0 || njobs < max_load_average)
+     return 0;
+
+  status = Customs_Host (EXPORT_SAME, &permit);
+  if (status != RPC_SUCCESS)
+    {
+      DB (DB_JOBS, (_("Customs won't export: %s\n"),
+                    Rpc_ErrorMessage (status)));
+      return 0;
+    }
+
+  return !CUSTOMS_FAIL (&permit.addr);
+}
+
+/* Start a remote job running the command in ARGV, with environment from
+   ENVP.  It gets standard input from STDIN_FD.  On failure, return
+   nonzero.  On success, return zero, and set *USED_STDIN to nonzero if it
+   will actually use STDIN_FD, zero if not, set *ID_PTR to a unique
+   identification, and set *IS_REMOTE to nonzero if the job is remote, zero
+   if it is local (meaning *ID_PTR is a process ID).  */
+
+int
+start_remote_job (char **argv, char **envp, int stdin_fd,
+                  int *is_remote, int *id_ptr, int *used_stdin)
+{
+  char waybill[MAX_DATA_SIZE], msg[128];
+  struct hostent *host;
+  struct timeval timeout;
+  struct sockaddr_in sin;
+  int len;
+  int retsock, retport, sock;
+  Rpc_Stat status;
+  int pid;
+
+  /* Create the return socket.  */
+  retsock = Rpc_UdpCreate (True, 0);
+  if (retsock < 0)
+    {
+      O (error, NILF, "exporting: Couldn't create return socket.");
+      return 1;
+    }
+
+  /* Get the return socket's port number.  */
+  len = sizeof (sin);
+  if (getsockname (retsock, (struct sockaddr *) &sin, &len) < 0)
+    {
+      (void) close (retsock);
+      perror_with_name ("exporting: ", "getsockname");
+      return 1;
+    }
+  retport = sin.sin_port;
+
+  /* Create the TCP socket for talking to the remote child.  */
+  sock = Rpc_TcpCreate (False, 0);
+
+  /* Create a WayBill to give to the server.  */
+  len = Customs_MakeWayBill (&permit, normalized_cwd, argv[0], argv,
+                             envp, retport, waybill);
+
+  /* Modify the waybill as if the remote child had done 'child_access ()'.  */
+  {
+    WayBill *wb = (WayBill *) waybill;
+    wb->ruid = wb->euid;
+    wb->rgid = wb->egid;
+  }
+
+  /* Send the request to the server, timing out in 20 seconds.  */
+  timeout.tv_usec = 0;
+  timeout.tv_sec = 20;
+  sin.sin_family = AF_INET;
+  sin.sin_port = htons (Customs_Port ());
+  sin.sin_addr = permit.addr;
+  status = Rpc_Call (sock, &sin, (Rpc_Proc) CUSTOMS_IMPORT,
+                     len, (Rpc_Opaque) waybill,
+                     sizeof (msg), (Rpc_Opaque) msg,
+                     1, &timeout);
+
+  host = gethostbyaddr ((char *)&permit.addr, sizeof(permit.addr), AF_INET);
+
+  {
+    const char *hnm = host ? host->h_name : inet_ntoa (permit.addr);
+    size_t hlen = strlen (hnm);
+
+    if (status != RPC_SUCCESS)
+      {
+        const char *err = Rpc_ErrorMessage (status);
+        (void) close (retsock);
+        (void) close (sock);
+        error (NILF, hlen + strlen (err),
+               "exporting to %s: %s", hnm, err);
+        return 1;
+      }
+    else if (msg[0] != 'O' || msg[1] != 'k' || msg[2] != '\0')
+      {
+        (void) close (retsock);
+        (void) close (sock);
+        error (NILF, hlen + strlen (msg), "exporting to %s: %s", hnm, msg);
+        return 1;
+      }
+    else
+      {
+        error (NILF, hlen + INTSTR_LENGTH,
+               "*** exported to %s (id %u)", hnm, permit.id);
+      }
+
+    fflush (stdout);
+    fflush (stderr);
+  }
+
+  pid = fork ();
+  if (pid < 0)
+    {
+      /* The fork failed!  */
+      perror_with_name ("fork", "");
+      return 1;
+    }
+  else if (pid == 0)
+    {
+      /* Child side.  Run 'export' to handle the connection.  */
+      static char sock_buf[20], retsock_buf[20], id_buf[20];
+      static char *new_argv[6] =
+        { EXPORT_COMMAND, "-id", sock_buf, retsock_buf, id_buf, 0 };
+
+      /* Set up the arguments.  */
+      (void) sprintf (sock_buf, "%d", sock);
+      (void) sprintf (retsock_buf, "%d", retsock);
+      (void) sprintf (id_buf, "%x", permit.id);
+
+      /* Get the right stdin.  */
+      if (stdin_fd != 0)
+        (void) dup2 (stdin_fd, 0);
+
+      /* Unblock signals in the child.  */
+      unblock_sigs ();
+
+      /* Run the command.  */
+      exec_command (new_argv, envp);
+    }
+
+  /* Parent side.  Return the 'export' process's ID.  */
+  (void) close (retsock);
+  (void) close (sock);
+  *is_remote = 0;
+  *id_ptr = pid;
+  *used_stdin = 1;
+  return 0;
+}
+
+/* Get the status of a dead remote child.  Block waiting for one to die
+   if BLOCK is nonzero.  Set *EXIT_CODE_PTR to the exit status, *SIGNAL_PTR
+   to the termination signal or zero if it exited normally, and *COREDUMP_PTR
+   nonzero if it dumped core.  Return the ID of the child that died,
+   0 if we would have to block and !BLOCK, or < 0 if there were none.  */
+
+int
+remote_status (int *exit_code_ptr, int *signal_ptr, int *coredump_ptr,
+               int block)
+{
+  return -1;
+}
+
+/* Block asynchronous notification of remote child death.
+   If this notification is done by raising the child termination
+   signal, do not block that signal.  */
+void
+block_remote_children (void)
+{
+  return;
+}
+
+/* Restore asynchronous notification of remote child death.
+   If this is done by raising the child termination signal,
+   do not unblock that signal.  */
+void
+unblock_remote_children (void)
+{
+  return;
+}
+
+/* Send signal SIG to child ID.  Return 0 if successful, -1 if not.  */
+int
+remote_kill (int id, int sig)
+{
+  return -1;
+}
diff --git a/remote-stub.c b/remote-stub.c
new file mode 100644
index 0000000..aeb335c
--- /dev/null
+++ b/remote-stub.c
@@ -0,0 +1,99 @@
+/* Template for the remote job exportation interface to GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "job.h"
+#include "commands.h"
+
+
+char *remote_description = 0;
+
+/* Call once at startup even if no commands are run.  */
+
+void
+remote_setup (void)
+{
+}
+
+/* Called before exit.  */
+
+void
+remote_cleanup (void)
+{
+}
+
+/* Return nonzero if the next job should be done remotely.  */
+
+int
+start_remote_job_p (int first_p UNUSED)
+{
+  return 0;
+}
+
+/* Start a remote job running the command in ARGV,
+   with environment from ENVP.  It gets standard input from STDIN_FD.  On
+   failure, return nonzero.  On success, return zero, and set *USED_STDIN
+   to nonzero if it will actually use STDIN_FD, zero if not, set *ID_PTR to
+   a unique identification, and set *IS_REMOTE to zero if the job is local,
+   nonzero if it is remote (meaning *ID_PTR is a process ID).  */
+
+int
+start_remote_job (char **argv UNUSED, char **envp UNUSED, int stdin_fd UNUSED,
+                  int *is_remote UNUSED, int *id_ptr UNUSED,
+                  int *used_stdin UNUSED)
+{
+  return -1;
+}
+
+/* Get the status of a dead remote child.  Block waiting for one to die
+   if BLOCK is nonzero.  Set *EXIT_CODE_PTR to the exit status, *SIGNAL_PTR
+   to the termination signal or zero if it exited normally, and *COREDUMP_PTR
+   nonzero if it dumped core.  Return the ID of the child that died,
+   0 if we would have to block and !BLOCK, or < 0 if there were none.  */
+
+int
+remote_status (int *exit_code_ptr UNUSED, int *signal_ptr UNUSED,
+               int *coredump_ptr UNUSED, int block UNUSED)
+{
+  errno = ECHILD;
+  return -1;
+}
+
+/* Block asynchronous notification of remote child death.
+   If this notification is done by raising the child termination
+   signal, do not block that signal.  */
+void
+block_remote_children (void)
+{
+  return;
+}
+
+/* Restore asynchronous notification of remote child death.
+   If this is done by raising the child termination signal,
+   do not unblock that signal.  */
+void
+unblock_remote_children (void)
+{
+  return;
+}
+
+/* Send signal SIG to child ID.  Return 0 if successful, -1 if not.  */
+int
+remote_kill (int id UNUSED, int sig UNUSED)
+{
+  return -1;
+}
diff --git a/rule.c b/rule.c
new file mode 100644
index 0000000..9abf5b0
--- /dev/null
+++ b/rule.c
@@ -0,0 +1,533 @@
+/* Pattern and suffix rule internals for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "filedef.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+#include "variable.h"
+#include "rule.h"
+
+static void freerule (struct rule *rule, struct rule *lastrule);
+
+/* Chain of all pattern rules.  */
+
+struct rule *pattern_rules;
+
+/* Pointer to last rule in the chain, so we can add onto the end.  */
+
+struct rule *last_pattern_rule;
+
+/* Number of rules in the chain.  */
+
+unsigned int num_pattern_rules;
+
+/* Maximum number of target patterns of any pattern rule.  */
+
+unsigned int max_pattern_targets;
+
+/* Maximum number of dependencies of any pattern rule.  */
+
+unsigned int max_pattern_deps;
+
+/* Maximum length of the name of a dependencies of any pattern rule.  */
+
+unsigned int max_pattern_dep_length;
+
+/* Pointer to structure for the file .SUFFIXES
+   whose dependencies are the suffixes to be searched.  */
+
+struct file *suffix_file;
+
+/* Maximum length of a suffix.  */
+
+unsigned int maxsuffix;
+
+/* Compute the maximum dependency length and maximum number of
+   dependencies of all implicit rules.  Also sets the subdir
+   flag for a rule when appropriate, possibly removing the rule
+   completely when appropriate.  */
+
+void
+count_implicit_rule_limits (void)
+{
+  char *name;
+  int namelen;
+  struct rule *rule;
+
+  num_pattern_rules = max_pattern_targets = max_pattern_deps = 0;
+  max_pattern_dep_length = 0;
+
+  name = 0;
+  namelen = 0;
+  rule = pattern_rules;
+  while (rule != 0)
+    {
+      unsigned int ndeps = 0;
+      struct dep *dep;
+      struct rule *next = rule->next;
+
+      ++num_pattern_rules;
+
+      if (rule->num > max_pattern_targets)
+        max_pattern_targets = rule->num;
+
+      for (dep = rule->deps; dep != 0; dep = dep->next)
+        {
+          const char *dname = dep_name (dep);
+          unsigned int len = strlen (dname);
+
+#ifdef VMS
+          const char *p = strrchr (dname, ']');
+          const char *p2;
+          if (p == 0)
+            p = strrchr (dname, ':');
+          p2 = p != 0 ? strchr (dname, '%') : 0;
+#else
+          const char *p = strrchr (dname, '/');
+          const char *p2 = p != 0 ? strchr (dname, '%') : 0;
+#endif
+          ndeps++;
+
+          if (len > max_pattern_dep_length)
+            max_pattern_dep_length = len;
+
+          if (p != 0 && p2 > p)
+            {
+              /* There is a slash before the % in the dep name.
+                 Extract the directory name.  */
+              if (p == dname)
+                ++p;
+              if (p - dname > namelen)
+                {
+                  namelen = p - dname;
+                  name = xrealloc (name, namelen + 1);
+                }
+              memcpy (name, dname, p - dname);
+              name[p - dname] = '\0';
+
+              /* In the deps of an implicit rule the 'changed' flag
+                 actually indicates that the dependency is in a
+                 nonexistent subdirectory.  */
+
+              dep->changed = !dir_file_exists_p (name, "");
+            }
+          else
+            /* This dependency does not reside in a subdirectory.  */
+            dep->changed = 0;
+        }
+
+      if (ndeps > max_pattern_deps)
+        max_pattern_deps = ndeps;
+
+      rule = next;
+    }
+
+  free (name);
+}
+
+/* Create a pattern rule from a suffix rule.
+   TARGET is the target suffix; SOURCE is the source suffix.
+   CMDS are the commands.
+   If TARGET is nil, it means the target pattern should be '(%.o)'.
+   If SOURCE is nil, it means there should be no deps.  */
+
+static void
+convert_suffix_rule (const char *target, const char *source,
+                     struct commands *cmds)
+{
+  const char **names, **percents;
+  struct dep *deps;
+
+  names = xmalloc (sizeof (const char *));
+  percents = xmalloc (sizeof (const char *));
+
+  if (target == 0)
+    {
+      /* Special case: TARGET being nil means we are defining a '.X.a' suffix
+         rule; the target pattern is always '(%.o)'.  */
+#ifdef VMS
+      *names = strcache_add_len ("(%.obj)", 7);
+#else
+      *names = strcache_add_len ("(%.o)", 5);
+#endif
+      *percents = *names + 1;
+    }
+  else
+    {
+      /* Construct the target name.  */
+      unsigned int len = strlen (target);
+      char *p = alloca (1 + len + 1);
+      p[0] = '%';
+      memcpy (p + 1, target, len + 1);
+      *names = strcache_add_len (p, len + 1);
+      *percents = *names;
+    }
+
+  if (source == 0)
+    deps = 0;
+  else
+    {
+      /* Construct the dependency name.  */
+      unsigned int len = strlen (source);
+      char *p = alloca (1 + len + 1);
+      p[0] = '%';
+      memcpy (p + 1, source, len + 1);
+      deps = alloc_dep ();
+      deps->name = strcache_add_len (p, len + 1);
+    }
+
+  create_pattern_rule (names, percents, 1, 0, deps, cmds, 0);
+}
+
+/* Convert old-style suffix rules to pattern rules.
+   All rules for the suffixes on the .SUFFIXES list are converted and added to
+   the chain of pattern rules.  */
+
+void
+convert_to_pattern (void)
+{
+  struct dep *d, *d2;
+  char *rulename;
+
+  /* We will compute every potential suffix rule (.x.y) from the list of
+     suffixes in the .SUFFIXES target's dependencies and see if it exists.
+     First find the longest of the suffixes.  */
+
+  maxsuffix = 0;
+  for (d = suffix_file->deps; d != 0; d = d->next)
+    {
+      unsigned int l = strlen (dep_name (d));
+      if (l > maxsuffix)
+        maxsuffix = l;
+    }
+
+  /* Space to construct the suffix rule target name.  */
+  rulename = alloca ((maxsuffix * 2) + 1);
+
+  for (d = suffix_file->deps; d != 0; d = d->next)
+    {
+      unsigned int slen;
+
+      /* Make a rule that is just the suffix, with no deps or commands.
+         This rule exists solely to disqualify match-anything rules.  */
+      convert_suffix_rule (dep_name (d), 0, 0);
+
+      if (d->file->cmds != 0)
+        /* Record a pattern for this suffix's null-suffix rule.  */
+        convert_suffix_rule ("", dep_name (d), d->file->cmds);
+
+      /* Add every other suffix to this one and see if it exists as a
+         two-suffix rule.  */
+      slen = strlen (dep_name (d));
+      memcpy (rulename, dep_name (d), slen);
+
+      for (d2 = suffix_file->deps; d2 != 0; d2 = d2->next)
+        {
+          struct file *f;
+          unsigned int s2len;
+
+          s2len = strlen (dep_name (d2));
+
+          /* Can't build something from itself.  */
+          if (slen == s2len && streq (dep_name (d), dep_name (d2)))
+            continue;
+
+          memcpy (rulename + slen, dep_name (d2), s2len + 1);
+          f = lookup_file (rulename);
+          if (f == 0 || f->cmds == 0)
+            continue;
+
+          if (s2len == 2 && rulename[slen] == '.' && rulename[slen + 1] == 'a')
+            /* A suffix rule '.X.a:' generates the pattern rule '(%.o): %.X'.
+               It also generates a normal '%.a: %.X' rule below.  */
+            convert_suffix_rule (NULL, /* Indicates '(%.o)'.  */
+                                 dep_name (d),
+                                 f->cmds);
+
+          /* The suffix rule '.X.Y:' is converted
+             to the pattern rule '%.Y: %.X'.  */
+          convert_suffix_rule (dep_name (d2), dep_name (d), f->cmds);
+        }
+    }
+}
+
+
+/* Install the pattern rule RULE (whose fields have been filled in) at the end
+   of the list (so that any rules previously defined will take precedence).
+   If this rule duplicates a previous one (identical target and dependencies),
+   the old one is replaced if OVERRIDE is nonzero, otherwise this new one is
+   thrown out.  When an old rule is replaced, the new one is put at the end of
+   the list.  Return nonzero if RULE is used; zero if not.  */
+
+static int
+new_pattern_rule (struct rule *rule, int override)
+{
+  struct rule *r, *lastrule;
+  unsigned int i, j;
+
+  rule->in_use = 0;
+  rule->terminal = 0;
+
+  rule->next = 0;
+
+  /* Search for an identical rule.  */
+  lastrule = 0;
+  for (r = pattern_rules; r != 0; lastrule = r, r = r->next)
+    for (i = 0; i < rule->num; ++i)
+      {
+        for (j = 0; j < r->num; ++j)
+          if (!streq (rule->targets[i], r->targets[j]))
+            break;
+        /* If all the targets matched...  */
+        if (j == r->num)
+          {
+            struct dep *d, *d2;
+            for (d = rule->deps, d2 = r->deps;
+                 d != 0 && d2 != 0; d = d->next, d2 = d2->next)
+              if (!streq (dep_name (d), dep_name (d2)))
+                break;
+            if (d == 0 && d2 == 0)
+              {
+                /* All the dependencies matched.  */
+                if (override)
+                  {
+                    /* Remove the old rule.  */
+                    freerule (r, lastrule);
+                    /* Install the new one.  */
+                    if (pattern_rules == 0)
+                      pattern_rules = rule;
+                    else
+                      last_pattern_rule->next = rule;
+                    last_pattern_rule = rule;
+
+                    /* We got one.  Stop looking.  */
+                    goto matched;
+                  }
+                else
+                  {
+                    /* The old rule stays intact.  Destroy the new one.  */
+                    freerule (rule, (struct rule *) 0);
+                    return 0;
+                  }
+              }
+          }
+      }
+
+ matched:;
+
+  if (r == 0)
+    {
+      /* There was no rule to replace.  */
+      if (pattern_rules == 0)
+        pattern_rules = rule;
+      else
+        last_pattern_rule->next = rule;
+      last_pattern_rule = rule;
+    }
+
+  return 1;
+}
+
+
+/* Install an implicit pattern rule based on the three text strings
+   in the structure P points to.  These strings come from one of
+   the arrays of default implicit pattern rules.
+   TERMINAL specifies what the 'terminal' field of the rule should be.  */
+
+void
+install_pattern_rule (struct pspec *p, int terminal)
+{
+  struct rule *r;
+  const char *ptr;
+
+  r = xmalloc (sizeof (struct rule));
+
+  r->num = 1;
+  r->targets = xmalloc (sizeof (const char *));
+  r->suffixes = xmalloc (sizeof (const char *));
+  r->lens = xmalloc (sizeof (unsigned int));
+
+  r->lens[0] = strlen (p->target);
+  r->targets[0] = p->target;
+  r->suffixes[0] = find_percent_cached (&r->targets[0]);
+  assert (r->suffixes[0] != NULL);
+  ++r->suffixes[0];
+
+  ptr = p->dep;
+  r->deps = PARSE_SIMPLE_SEQ ((char **)&ptr, struct dep);
+
+  if (new_pattern_rule (r, 0))
+    {
+      r->terminal = terminal;
+      r->cmds = xmalloc (sizeof (struct commands));
+      r->cmds->fileinfo.filenm = 0;
+      r->cmds->fileinfo.lineno = 0;
+      /* These will all be string literals, but we malloc space for them
+         anyway because somebody might want to free them later.  */
+      r->cmds->commands = xstrdup (p->commands);
+      r->cmds->command_lines = 0;
+      r->cmds->recipe_prefix = RECIPEPREFIX_DEFAULT;
+    }
+}
+
+
+/* Free all the storage used in RULE and take it out of the
+   pattern_rules chain.  LASTRULE is the rule whose next pointer
+   points to RULE.  */
+
+static void
+freerule (struct rule *rule, struct rule *lastrule)
+{
+  struct rule *next = rule->next;
+
+  free_dep_chain (rule->deps);
+
+  /* MSVC erroneously warns without a cast here.  */
+  free ((void *)rule->targets);
+  free ((void *)rule->suffixes);
+  free (rule->lens);
+
+  /* We can't free the storage for the commands because there
+     are ways that they could be in more than one place:
+       * If the commands came from a suffix rule, they could also be in
+       the 'struct file's for other suffix rules or plain targets given
+       on the same makefile line.
+       * If two suffixes that together make a two-suffix rule were each
+       given twice in the .SUFFIXES list, and in the proper order, two
+       identical pattern rules would be created and the second one would
+       be discarded here, but both would contain the same 'struct commands'
+       pointer from the 'struct file' for the suffix rule.  */
+
+  free (rule);
+
+  if (pattern_rules == rule)
+    if (lastrule != 0)
+      abort ();
+    else
+      pattern_rules = next;
+  else if (lastrule != 0)
+    lastrule->next = next;
+  if (last_pattern_rule == rule)
+    last_pattern_rule = lastrule;
+}
+
+/* Create a new pattern rule with the targets in the nil-terminated array
+   TARGETS.  TARGET_PERCENTS is an array of pointers to the % in each element
+   of TARGETS.  N is the number of items in the array (not counting the nil
+   element).  The new rule has dependencies DEPS and commands from COMMANDS.
+   It is a terminal rule if TERMINAL is nonzero.  This rule overrides
+   identical rules with different commands if OVERRIDE is nonzero.
+
+   The storage for TARGETS and its elements and TARGET_PERCENTS is used and
+   must not be freed until the rule is destroyed.  */
+
+void
+create_pattern_rule (const char **targets, const char **target_percents,
+                     unsigned int n, int terminal, struct dep *deps,
+                     struct commands *commands, int override)
+{
+  unsigned int i;
+  struct rule *r = xmalloc (sizeof (struct rule));
+
+  r->num = n;
+  r->cmds = commands;
+  r->deps = deps;
+  r->targets = targets;
+  r->suffixes = target_percents;
+  r->lens = xmalloc (n * sizeof (unsigned int));
+
+  for (i = 0; i < n; ++i)
+    {
+      r->lens[i] = strlen (targets[i]);
+      assert (r->suffixes[i] != NULL);
+      ++r->suffixes[i];
+    }
+
+  if (new_pattern_rule (r, override))
+    r->terminal = terminal;
+}
+
+/* Print the data base of rules.  */
+
+static void                     /* Useful to call from gdb.  */
+print_rule (struct rule *r)
+{
+  unsigned int i;
+
+  for (i = 0; i < r->num; ++i)
+    {
+      fputs (r->targets[i], stdout);
+      putchar ((i + 1 == r->num) ? ':' : ' ');
+    }
+  if (r->terminal)
+    putchar (':');
+
+  print_prereqs (r->deps);
+
+  if (r->cmds != 0)
+    print_commands (r->cmds);
+}
+
+void
+print_rule_data_base (void)
+{
+  unsigned int rules, terminal;
+  struct rule *r;
+
+  puts (_("\n# Implicit Rules"));
+
+  rules = terminal = 0;
+  for (r = pattern_rules; r != 0; r = r->next)
+    {
+      ++rules;
+
+      putchar ('\n');
+      print_rule (r);
+
+      if (r->terminal)
+        ++terminal;
+    }
+
+  if (rules == 0)
+    puts (_("\n# No implicit rules."));
+  else
+    {
+      printf (_("\n# %u implicit rules, %u"), rules, terminal);
+#ifndef NO_FLOAT
+      printf (" (%.1f%%)", (double) terminal / (double) rules * 100.0);
+#else
+      {
+        int f = (terminal * 1000 + 5) / rules;
+        printf (" (%d.%d%%)", f/10, f%10);
+      }
+#endif
+      puts (_(" terminal."));
+    }
+
+  if (num_pattern_rules != rules)
+    {
+      /* This can happen if a fatal error was detected while reading the
+         makefiles and thus count_implicit_rule_limits wasn't called yet.  */
+      if (num_pattern_rules != 0)
+        ONN (fatal, NILF, _("BUG: num_pattern_rules is wrong!  %u != %u"),
+             num_pattern_rules, rules);
+    }
+}
diff --git a/rule.h b/rule.h
new file mode 100644
index 0000000..df9fba2
--- /dev/null
+++ b/rule.h
@@ -0,0 +1,57 @@
+/* Definitions for using pattern rules in GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+
+/* Structure used for pattern (implicit) rules.  */
+
+struct rule
+  {
+    struct rule *next;
+    const char **targets;       /* Targets of the rule.  */
+    unsigned int *lens;         /* Lengths of each target.  */
+    const char **suffixes;      /* Suffixes (after '%') of each target.  */
+    struct dep *deps;           /* Dependencies of the rule.  */
+    struct commands *cmds;      /* Commands to execute.  */
+    unsigned short num;         /* Number of targets.  */
+    char terminal;              /* If terminal (double-colon).  */
+    char in_use;                /* If in use by a parent pattern_search.  */
+  };
+
+/* For calling install_pattern_rule.  */
+struct pspec
+  {
+    const char *target, *dep, *commands;
+  };
+
+
+extern struct rule *pattern_rules;
+extern struct rule *last_pattern_rule;
+extern unsigned int num_pattern_rules;
+
+extern unsigned int max_pattern_deps;
+extern unsigned int max_pattern_targets;
+extern unsigned int max_pattern_dep_length;
+
+extern struct file *suffix_file;
+extern unsigned int maxsuffix;
+
+
+void count_implicit_rule_limits (void);
+void convert_to_pattern (void);
+void install_pattern_rule (struct pspec *p, int terminal);
+void create_pattern_rule (const char **targets, const char **target_percents,
+                          unsigned int num, int terminal, struct dep *deps,
+                          struct commands *commands, int override);
diff --git a/signame.c b/signame.c
new file mode 100644
index 0000000..7db2439
--- /dev/null
+++ b/signame.c
@@ -0,0 +1,254 @@
+/* Convert between signal names and numbers.
+Copyright (C) 1990-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+/* If the system provides strsignal, we don't need it. */
+
+#if !HAVE_STRSIGNAL
+
+/* If the system provides sys_siglist, we'll use that.
+   Otherwise create our own.
+ */
+
+#if !HAVE_DECL_SYS_SIGLIST
+
+/* Some systems do not define NSIG in <signal.h>.  */
+#ifndef NSIG
+#ifdef  _NSIG
+#define NSIG    _NSIG
+#else
+#define NSIG    32
+#endif
+#endif
+
+/* There is too much variation in Sys V signal numbers and names, so
+   we must initialize them at runtime.  */
+
+static const char *undoc;
+
+static const char *sys_siglist[NSIG];
+
+/* Table of abbreviations for signals.  Note:  A given number can
+   appear more than once with different abbreviations.  */
+#define SIG_TABLE_SIZE  (NSIG*2)
+
+typedef struct
+  {
+    int number;
+    const char *abbrev;
+  } num_abbrev;
+
+static num_abbrev sig_table[SIG_TABLE_SIZE];
+
+/* Number of elements of sig_table used.  */
+static int sig_table_nelts = 0;
+
+/* Enter signal number NUMBER into the tables with ABBREV and NAME.  */
+
+static void
+init_sig (int number, const char *abbrev, const char *name)
+{
+  /* If this value is ever greater than NSIG it seems like it'd be a bug in
+     the system headers, but... better safe than sorry.  We know, for
+     example, that this isn't always true on VMS.  */
+
+  if (number >= 0 && number < NSIG)
+    sys_siglist[number] = name;
+
+  if (sig_table_nelts < SIG_TABLE_SIZE)
+    {
+      sig_table[sig_table_nelts].number = number;
+      sig_table[sig_table_nelts++].abbrev = abbrev;
+    }
+}
+
+static int
+signame_init (void)
+{
+  int i;
+
+  undoc = xstrdup (_("unknown signal"));
+
+  /* Initialize signal names.  */
+  for (i = 0; i < NSIG; i++)
+    sys_siglist[i] = undoc;
+
+  /* Initialize signal names.  */
+#if defined (SIGHUP)
+  init_sig (SIGHUP, "HUP", _("Hangup"));
+#endif
+#if defined (SIGINT)
+  init_sig (SIGINT, "INT", _("Interrupt"));
+#endif
+#if defined (SIGQUIT)
+  init_sig (SIGQUIT, "QUIT", _("Quit"));
+#endif
+#if defined (SIGILL)
+  init_sig (SIGILL, "ILL", _("Illegal Instruction"));
+#endif
+#if defined (SIGTRAP)
+  init_sig (SIGTRAP, "TRAP", _("Trace/breakpoint trap"));
+#endif
+  /* If SIGIOT == SIGABRT, we want to print it as SIGABRT because
+     SIGABRT is in ANSI and POSIX.1 and SIGIOT isn't.  */
+#if defined (SIGABRT)
+  init_sig (SIGABRT, "ABRT", _("Aborted"));
+#endif
+#if defined (SIGIOT)
+  init_sig (SIGIOT, "IOT", _("IOT trap"));
+#endif
+#if defined (SIGEMT)
+  init_sig (SIGEMT, "EMT", _("EMT trap"));
+#endif
+#if defined (SIGFPE)
+  init_sig (SIGFPE, "FPE", _("Floating point exception"));
+#endif
+#if defined (SIGKILL)
+  init_sig (SIGKILL, "KILL", _("Killed"));
+#endif
+#if defined (SIGBUS)
+  init_sig (SIGBUS, "BUS", _("Bus error"));
+#endif
+#if defined (SIGSEGV)
+  init_sig (SIGSEGV, "SEGV", _("Segmentation fault"));
+#endif
+#if defined (SIGSYS)
+  init_sig (SIGSYS, "SYS", _("Bad system call"));
+#endif
+#if defined (SIGPIPE)
+  init_sig (SIGPIPE, "PIPE", _("Broken pipe"));
+#endif
+#if defined (SIGALRM)
+  init_sig (SIGALRM, "ALRM", _("Alarm clock"));
+#endif
+#if defined (SIGTERM)
+  init_sig (SIGTERM, "TERM", _("Terminated"));
+#endif
+#if defined (SIGUSR1)
+  init_sig (SIGUSR1, "USR1", _("User defined signal 1"));
+#endif
+#if defined (SIGUSR2)
+  init_sig (SIGUSR2, "USR2", _("User defined signal 2"));
+#endif
+  /* If SIGCLD == SIGCHLD, we want to print it as SIGCHLD because that
+     is what is in POSIX.1.  */
+#if defined (SIGCHLD)
+  init_sig (SIGCHLD, "CHLD", _("Child exited"));
+#endif
+#if defined (SIGCLD)
+  init_sig (SIGCLD, "CLD", _("Child exited"));
+#endif
+#if defined (SIGPWR)
+  init_sig (SIGPWR, "PWR", _("Power failure"));
+#endif
+#if defined (SIGTSTP)
+  init_sig (SIGTSTP, "TSTP", _("Stopped"));
+#endif
+#if defined (SIGTTIN)
+  init_sig (SIGTTIN, "TTIN", _("Stopped (tty input)"));
+#endif
+#if defined (SIGTTOU)
+  init_sig (SIGTTOU, "TTOU", _("Stopped (tty output)"));
+#endif
+#if defined (SIGSTOP)
+  init_sig (SIGSTOP, "STOP", _("Stopped (signal)"));
+#endif
+#if defined (SIGXCPU)
+  init_sig (SIGXCPU, "XCPU", _("CPU time limit exceeded"));
+#endif
+#if defined (SIGXFSZ)
+  init_sig (SIGXFSZ, "XFSZ", _("File size limit exceeded"));
+#endif
+#if defined (SIGVTALRM)
+  init_sig (SIGVTALRM, "VTALRM", _("Virtual timer expired"));
+#endif
+#if defined (SIGPROF)
+  init_sig (SIGPROF, "PROF", _("Profiling timer expired"));
+#endif
+#if defined (SIGWINCH)
+  /* "Window size changed" might be more accurate, but even if that
+     is all that it means now, perhaps in the future it will be
+     extended to cover other kinds of window changes.  */
+  init_sig (SIGWINCH, "WINCH", _("Window changed"));
+#endif
+#if defined (SIGCONT)
+  init_sig (SIGCONT, "CONT", _("Continued"));
+#endif
+#if defined (SIGURG)
+  init_sig (SIGURG, "URG", _("Urgent I/O condition"));
+#endif
+#if defined (SIGIO)
+  /* "I/O pending" has also been suggested.  A disadvantage is that signal
+     only happens when the process has asked for it, not every time I/O is
+     pending.  Another disadvantage is the confusion from giving it a
+     different name than under Unix.  */
+  init_sig (SIGIO, "IO", _("I/O possible"));
+#endif
+#if defined (SIGWIND)
+  init_sig (SIGWIND, "WIND", _("SIGWIND"));
+#endif
+#if defined (SIGPHONE)
+  init_sig (SIGPHONE, "PHONE", _("SIGPHONE"));
+#endif
+#if defined (SIGPOLL)
+  init_sig (SIGPOLL, "POLL", _("I/O possible"));
+#endif
+#if defined (SIGLOST)
+  init_sig (SIGLOST, "LOST", _("Resource lost"));
+#endif
+#if defined (SIGDANGER)
+  init_sig (SIGDANGER, "DANGER", _("Danger signal"));
+#endif
+#if defined (SIGINFO)
+  init_sig (SIGINFO, "INFO", _("Information request"));
+#endif
+#if defined (SIGNOFP)
+  init_sig (SIGNOFP, "NOFP", _("Floating point co-processor not available"));
+#endif
+
+  return 1;
+}
+
+#endif  /* HAVE_DECL_SYS_SIGLIST */
+
+
+char *
+strsignal (int sig)
+{
+  static char buf[] = "Signal 12345678901234567890";
+
+#if ! HAVE_DECL_SYS_SIGLIST
+# if HAVE_DECL__SYS_SIGLIST
+#  define sys_siglist _sys_siglist
+# elif HAVE_DECL___SYS_SIGLIST
+#  define sys_siglist __sys_siglist
+# else
+  static char sig_initted = 0;
+
+  if (!sig_initted)
+    sig_initted = signame_init ();
+# endif
+#endif
+
+  if (sig > 0 && sig < NSIG)
+    return (char *) sys_siglist[sig];
+
+  sprintf (buf, "Signal %d", sig);
+  return buf;
+}
+
+#endif  /* HAVE_STRSIGNAL */
diff --git a/strcache.c b/strcache.c
new file mode 100644
index 0000000..1ade5e7
--- /dev/null
+++ b/strcache.c
@@ -0,0 +1,291 @@
+/* Constant string caching for GNU Make.
+Copyright (C) 2006-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <stddef.h>
+#include <assert.h>
+
+#include "hash.h"
+
+/* A string cached here will never be freed, so we don't need to worry about
+   reference counting.  We just store the string, and then remember it in a
+   hash so it can be looked up again. */
+
+typedef unsigned short int sc_buflen_t;
+
+struct strcache {
+  struct strcache *next;    /* The next block of strings.  Must be first!  */
+  sc_buflen_t end;          /* Offset to the beginning of free space.  */
+  sc_buflen_t bytesfree;    /* Free space left in this buffer.  */
+  sc_buflen_t count;        /* # of strings in this buffer (for stats).  */
+  char buffer[1];           /* The buffer comes after this.  */
+};
+
+/* The size (in bytes) of each cache buffer.
+   Try to pick something that will map well into the heap.
+   This must be able to be represented by a short int (<=65535).  */
+#define CACHE_BUFFER_BASE       (8192)
+#define CACHE_BUFFER_ALLOC(_s)  ((_s) - (2 * sizeof (size_t)))
+#define CACHE_BUFFER_OFFSET     (offsetof (struct strcache, buffer))
+#define CACHE_BUFFER_SIZE(_s)   (CACHE_BUFFER_ALLOC(_s) - CACHE_BUFFER_OFFSET)
+
+static sc_buflen_t bufsize = CACHE_BUFFER_SIZE (CACHE_BUFFER_BASE);
+static struct strcache *strcache = NULL;
+static struct strcache *fullcache = NULL;
+
+static unsigned long total_buffers = 0;
+static unsigned long total_strings = 0;
+static unsigned long total_size = 0;
+
+/* Add a new buffer to the cache.  Add it at the front to reduce search time.
+   This can also increase the overhead, since it's less likely that older
+   buffers will be filled in.  However, GNU make has so many smaller strings
+   that this doesn't seem to be much of an issue in practice.
+ */
+static struct strcache *
+new_cache ()
+{
+  struct strcache *new;
+  new = xmalloc (bufsize + CACHE_BUFFER_OFFSET);
+  new->end = 0;
+  new->count = 0;
+  new->bytesfree = bufsize;
+
+  new->next = strcache;
+  strcache = new;
+
+  ++total_buffers;
+  return new;
+}
+
+static const char *
+add_string (const char *str, unsigned int len)
+{
+  char *res;
+  struct strcache *sp;
+  struct strcache **spp = &strcache;
+  /* We need space for the nul char.  */
+  unsigned int sz = len + 1;
+
+  /* If the string we want is too large to fit into a single buffer, then
+     no existing cache is large enough.  Change the maximum size.  */
+  if (sz > bufsize)
+    bufsize = CACHE_BUFFER_SIZE ((((sz + 1) / CACHE_BUFFER_BASE) + 1)
+                                 * CACHE_BUFFER_BASE);
+  else
+    /* Find the first cache with enough free space.  */
+    for (; *spp != NULL; spp = &(*spp)->next)
+      if ((*spp)->bytesfree > sz)
+        break;
+
+  /* If nothing is big enough, make a new cache.  */
+  sp = *spp;
+  if (sp == NULL)
+    {
+      sp = new_cache ();
+      spp = &sp;
+    }
+
+  /* Add the string to this cache.  */
+  res = &sp->buffer[sp->end];
+  memmove (res, str, len);
+  res[len] = '\0';
+  sp->end += sz;
+  sp->bytesfree -= sz;
+  ++sp->count;
+
+  /* If the amount free in this cache is less than the average string size,
+     consider it full and move it to the full list.  */
+  ++total_strings;
+  total_size += sz;
+
+  if (sp->bytesfree < (total_size / total_strings) + 1)
+    {
+      *spp = (*spp)->next;
+      sp->next = fullcache;
+      fullcache = sp;
+    }
+
+  return res;
+}
+
+
+/* Hash table of strings in the cache.  */
+
+static unsigned long
+str_hash_1 (const void *key)
+{
+  return_ISTRING_HASH_1 ((const char *) key);
+}
+
+static unsigned long
+str_hash_2 (const void *key)
+{
+  return_ISTRING_HASH_2 ((const char *) key);
+}
+
+static int
+str_hash_cmp (const void *x, const void *y)
+{
+  return_ISTRING_COMPARE ((const char *) x, (const char *) y);
+}
+
+static struct hash_table strings;
+static unsigned long total_adds = 0;
+
+static const char *
+add_hash (const char *str, int len)
+{
+  /* Look up the string in the hash.  If it's there, return it.  */
+  char *const *slot = (char *const *) hash_find_slot (&strings, str);
+  const char *key = *slot;
+
+  /* Count the total number of add operations we performed.  */
+  ++total_adds;
+
+  if (!HASH_VACANT (key))
+    return key;
+
+  /* Not there yet so add it to a buffer, then into the hash table.  */
+  key = add_string (str, len);
+  hash_insert_at (&strings, key, slot);
+  return key;
+}
+
+/* Returns true if the string is in the cache; false if not.  */
+int
+strcache_iscached (const char *str)
+{
+  struct strcache *sp;
+
+  for (sp = strcache; sp != 0; sp = sp->next)
+    if (str >= sp->buffer && str < sp->buffer + sp->end)
+      return 1;
+  for (sp = fullcache; sp != 0; sp = sp->next)
+    if (str >= sp->buffer && str < sp->buffer + sp->end)
+      return 1;
+
+  return 0;
+}
+
+/* If the string is already in the cache, return a pointer to the cached
+   version.  If not, add it then return a pointer to the cached version.
+   Note we do NOT take control of the string passed in.  */
+const char *
+strcache_add (const char *str)
+{
+  return add_hash (str, strlen (str));
+}
+
+const char *
+strcache_add_len (const char *str, unsigned int len)
+{
+  /* If we're not given a nul-terminated string we have to create one, because
+     the hashing functions expect it.  */
+  if (str[len] != '\0')
+    {
+      char *key = alloca (len + 1);
+      memcpy (key, str, len);
+      key[len] = '\0';
+      str = key;
+    }
+
+  return add_hash (str, len);
+}
+
+int
+strcache_setbufsize (unsigned int size)
+{
+  if (size > bufsize)
+    bufsize = size;
+  return bufsize;
+}
+
+void
+strcache_init (void)
+{
+  hash_init (&strings, 8000, str_hash_1, str_hash_2, str_hash_cmp);
+}
+
+
+/* Generate some stats output.  */
+
+void
+strcache_print_stats (const char *prefix)
+{
+  const struct strcache *sp;
+  unsigned long numbuffs = 0, fullbuffs = 0;
+  unsigned long totfree = 0, maxfree = 0, minfree = bufsize;
+
+  if (! strcache)
+    {
+      printf (_("\n%s No strcache buffers\n"), prefix);
+      return;
+    }
+
+  /* Count the first buffer separately since it's not full.  */
+  for (sp = strcache->next; sp != NULL; sp = sp->next)
+    {
+      sc_buflen_t bf = sp->bytesfree;
+
+      totfree += bf;
+      maxfree = (bf > maxfree ? bf : maxfree);
+      minfree = (bf < minfree ? bf : minfree);
+
+      ++numbuffs;
+    }
+  for (sp = fullcache; sp != NULL; sp = sp->next)
+    {
+      sc_buflen_t bf = sp->bytesfree;
+
+      totfree += bf;
+      maxfree = (bf > maxfree ? bf : maxfree);
+      minfree = (bf < minfree ? bf : minfree);
+
+      ++numbuffs;
+      ++fullbuffs;
+    }
+
+  /* Make sure we didn't lose any buffers.  */
+  assert (total_buffers == numbuffs + 1);
+
+  printf (_("\n%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu B\n"),
+          prefix, numbuffs + 1, fullbuffs, total_strings, total_size,
+          (total_size / total_strings));
+
+  printf (_("%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"),
+          prefix, bufsize, strcache->end, strcache->count,
+          (strcache->end / strcache->count));
+
+  if (numbuffs)
+    {
+      unsigned long sz = total_size - bufsize;
+      unsigned long cnt = total_strings - strcache->count;
+      sc_buflen_t avgfree = totfree / numbuffs;
+
+      printf (_("%s other used: total = %lu B / count = %lu / avg = %lu B\n"),
+              prefix, sz, cnt, sz / cnt);
+
+      printf (_("%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"),
+              prefix, totfree, maxfree, minfree, avgfree);
+    }
+
+  printf (_("\n%s strcache performance: lookups = %lu / hit rate = %lu%%\n"),
+          prefix, total_adds, (long unsigned)(100.0 * (total_adds - total_strings) / total_adds));
+  fputs (_("# hash-table stats:\n# "), stdout);
+  hash_print_stats (&strings, stdout);
+}
diff --git a/subproc.bat b/subproc.bat
new file mode 100644
index 0000000..e3b8d3c
--- /dev/null
+++ b/subproc.bat
@@ -0,0 +1,23 @@
+@echo off

+rem Copyright (C) 1996-2014 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

+

+cd w32\subproc

+set MAKE=%2

+set MAKEFILE=%1

+if x%2 == x set MAKE=nmake

+%MAKE% /f %MAKEFILE%

+cd ..\..

diff --git a/tests/COPYING b/tests/COPYING
new file mode 100644
index 0000000..94a9ed0
--- /dev/null
+++ b/tests/COPYING
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/tests/ChangeLog.1 b/tests/ChangeLog.1
new file mode 100644
index 0000000..9abe731
--- /dev/null
+++ b/tests/ChangeLog.1
@@ -0,0 +1,1429 @@
+2013-10-09  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/patspecific_vars: Typo fixes.
+
+2013-10-05  Paul Smith  <psmith@gnu.org>
+
+	* test_driver.pl (run_all_tests): Rewrite to be more clear.
+	* scripts/features/jobserver: Avoid using $ENV{HOME} as it doesn't
+	exist everywhere.
+	* scripts/features/default_names: End with 1;
+
+	* scripts/features/loadapi: Use new calling signatures.  Verify
+	the NOEXPAND flag works.  Test with all valid function name
+	characters.
+
+2013-09-29  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/SHELL: Solaris /bin/sh can't handle options in
+	multiple words; skip that test.
+	* scripts/targets/ONESHELL: Ditto.
+
+	* scripts/variables/GNUMAKEFLAGS: Verify that GNUMAKEFLAGS is
+	cleared and options are not duplicated.
+
+2013-09-23  Paul Smith  <psmith@gnu.org>
+
+	* scripts/options/print-directory: Rename dash-w to
+	print-directory to avoid conflicts with dash-W on case-insensitive
+	filesystems.
+
+2013-09-22  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/se_implicit: Verify that order-only tokens
+	inside second expansion are parsed correctly.
+	Test for Savannah bug #31155.
+
+	* run_make_tests.pl (set_more_defaults): If we can't find
+	gnumake.h based on the make program we might be running from a
+	remote build directory.  Parse the Makefile for the right path.
+
+	Fix some test issues on Solaris.
+
+	* scripts/features/archives: Determine what output ar gives when
+	adding and replacing objects and compare with that.
+	* scripts/features/escape: Solaris /bin/sh doesn't properly handle
+	backslashes inside single quotes, so don't rely on it.
+	* scripts/features/output-sync: false(1) gives different exit
+	codes on different systems; use "exit 1" instead.
+	* scripts/features/parallelism: Increase the timeout for slower systems.
+
+2013-09-21  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/archives: Some versions of ar (MacOSX) generate
+	different output when creating archives.  Run it and verify the
+	real output.
+	* scripts/features/default_names: MacOSX is, like Windows,
+	case-preserving / case-insensitive.  Redo the test to avoid
+	checking for "UNIX".
+	* test_driver.pl (attach_default_output): Don't dup stdout into
+	stderr.  Reported by Denis Excoffier <bug-tar@Denis-Excoffier.org>
+
+	* scripts/features/se_explicit: Fix a test that behaves
+	differently with/without archive capability enabled.
+	* scripts/features/output-sync: Don't test output-sync if it's not
+	enabled.  We also skip it if parallelism is not enabled, although
+	strictly speaking some of the output-sync tests are valid even
+	without parallelism.
+	* scripts/features/jobserver: Move some tests that require the
+	jobserver from features/parallelism to a separate suite.  Only run
+	this if jobserver mode is enabled.
+
+	* scripts/features/output-sync: Test shell functions writing to
+	stderr in recipes: ensure it's captured via output-sync.  Test
+	output generated while reading makefiles and make sure it's
+	captured via output-sync.  Make sure that fatal errors dump the
+	output so it's not lost.
+
+	* scripts/options/dash-w: Add a test for -w flag.
+
+2013-09-15  Paul Smith  <psmith@gnu.org>
+
+	* scripts/misc/fopen-fail: Check for failure on infinite recursion.
+	* run_make_tests.pl (run_make_test): Allow the answer string to be
+	undef, which means that we shouldn't compare it at all.  Only the
+	exit code matters in this case.
+	* test_driver.pl (compare_output): Ditto.
+	Test for Savannah bug #27374.
+
+	* scripts/features/parallelism: Test broken jobserver on recursion.
+	Test for Savannah bug #39934.
+
+	* scripts/options/eval: Verify --eval during restart.
+	Test for Savannah bug #39203.
+
+2013-09-14  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync: Verify -Orecurse properly.
+
+2013-09-12  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync: Modify for output sync behavior.
+	* scripts/variables/MAKE_RESTARTS: Ditto.
+	* scripts/variables/MAKEFLAGS: Remove mode for --trace.
+	* scripts/variables/GNUMAKEFLAGS: Ditto.
+
+2013-07-22  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/rule_glob: Add tests for wildcards in rules.
+	Test for Savannah bug #39310.
+
+2013-07-09  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/se_implicit: Add a test for SE rules depending
+	on other SE rules to be built.
+
+2013-05-26  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/archives: Test for Savannah bug #38442.
+
+	* scripts/misc/bs-nl: Test for Savannah bug #39035.
+	Add a test for Savannah bug #38945.
+
+2013-05-22  Paul Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-n: Fix results after MAKEFLAGS fixes.
+	* scripts/variables/MAKEFLAGS: Ditto.
+	* scripts/variables/GNUMAKEFLAGS: Ditto.
+
+2013-05-14  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/loadapi: Add plugin_is_GPL_compatible symbol.
+	* scripts/features/load: Ditto.
+
+2013-05-13  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync (output_sync_set): Update for new
+	--trace behavior.
+
+2013-05-05  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync (output_sync_set): Remove
+	extraneous enter/leave lines, which are no longer printed.
+	Add tests for syncing command line printing.
+	(output_sync_set): Rename options: "job"->"line"; "make"->"recurse"
+
+2013-05-04  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/loadapi: Use the new alloc functions.
+
+	* scripts/features/output-sync (output_sync_set): New test for
+	ordered recursive output for -Ojob / -Otarget.
+
+2013-05-03  Eli Zaretskii  <eliz@gnu.org>
+
+	* scripts/features/load: Fix signatures of testload_gmk_setup and
+	explicit_setup, to bring them in line with the documentation.
+
+2013-04-28  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync (output_sync_set): Add tests for
+	the per-job syntax mode.
+	(output_sync_set): Test improved error message location.
+
+2013-04-15  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync (output_sync_set): New arg syntax.
+
+2013-04-14  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/output-sync: Rewrite to be more reliable.
+
+	* test_driver.pl (_run_command): Don't set SIGALRM until after we
+	start the child.  Print errors to the top-level output, which will
+	be stderr.
+	(attach_default_output): Use a list of file handles as the stack.
+	(detach_default_output): Ditto.
+
+	* scripts/features/output-sync: Add a test for output-sync.
+
+2013-02-25  Paul Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (valid_option): Support the -srcdir flag.
+	(set_more_defaults): Set up $srcdir if it's not set yet.
+
+	* scripts/functions/guile: Verify gmk-eval doesn't expand twice.
+	* scripts/features/load: Rework to test just the load capability.
+	* scripts/features/loadapi: New set of tests for the load API.
+
+2013-01-19  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/load: Test loaded files with and without "./"
+	prefix.  Add tests for automatically rebuilding loaded files if
+	they are out of date or non-existent.
+
+2013-01-13  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/archives: Add a check targets that have parens,
+	but are not archives.  See Savannah bug #37878.
+
+	* scripts/options/dash-n: Verify -n is preserved after recursive /
+	re-exec.  See Savannah bug #38051.
+
+2013-01-12  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Change rule so it doesn't depend
+	on invocation order, etc.
+
+2012-10-29  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/load: New test suite for the "load" directive.
+
+2012-09-09  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/file: Get errors in the C locale, not the
+	current locale.  Fixes Savannah bug #35764.
+
+	* scripts/features/escape: Check that backslashes before
+	non-special characters are not removed.
+
+	* scripts/features/utf8: New test for UTF-8 support.
+	See Savannah bug #36529.
+
+	* scripts/targets/POSIX: Add tests for default macro values as
+	specified by IEEE Std 1003.1-2008.  See Savannah bug #37069.
+
+2012-03-04  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/se_explicit: Test $(x:%=%) format in secondary
+	expansion prerequisite lists.  See Savannah bug #16545.
+
+	* scripts/features/escape: Test escaped ":" in prerequisite lists.
+	See Savannah bug #12126.
+
+	* scripts/variables/private: Test appending private variables in
+	pattern-specific target rules.  See Savannah bug #35468.
+
+2012-03-03  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/SHELL: Ensure .SHELLFLAGS works with options
+	separated by whitespace.
+
+	* scripts/targets/ONESHELL: Try .ONESHELL in combination with
+	whitespace-separated options in .SHELLFLAGS.  See Savannah bug #35397.
+
+	* scripts/functions/filter-out: Add filter tests and test escape
+	operations.  See Savannah bug #35410.
+
+	* guile.supp: Suppress valgrind errors from Guile
+	* run_make_tests.pl: Use the Guile suppression file.
+
+	* scripts/misc/bs-nl: Check for POSIX and non-POSIX
+	backslash/newline handling.  Addresses Savannah bug #16670.
+
+2012-01-29  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/flavors: Add tests for ::=
+	* scripts/variables/define: Ditto
+
+	* scripts/functions/file: Test the new $(file ...) function.
+
+2012-01-12  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/guile: New regression tests for Guile support.
+
+2011-12-10  Paul Smith  <psmith@gnu.org>
+
+	* scripts/targets/SECONDARY: Add prereq statements to ensure rules
+	are printed in the right order for test #9
+
+2011-11-14  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/double_colon: Check double-colon with escaped
+	filenames.  See Savannah bug #33399.
+
+2011-09-18  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: On re-exec make sure we preserve
+	the value of MAKEFLAGS when necessary.  See Savannah bug #33873.
+
+	* scripts/features/vpath3: Verify handling of -lfoo libraries
+	found via vpath vs. the standard directory search.
+	See Savannah bug #32511.
+
+2011-09-12  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/call: Verify that using export in a $(call ...)
+	context creates a global variable.  See Savannah bug #32498.
+
+2011-09-02  Paul Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-n: Verify that in "-n -t", the -n takes
+	priority.  Patch from Michael Witten <mfwitten@gmail.com>.
+
+2011-08-29  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/varnesting: Test resetting of variables while
+	expanding them.  See Savannah patch #7534
+
+2011-06-12  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/archives: Check archives with whitespace at the
+	beginning, end, and extra in the middle.
+	Another test for Savannah bug #30612.
+
+2011-05-07  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/private: Ensure we skip private variables when
+	appending.  Test for Savannah bug #32872.
+
+	* scripts/functions/wildcard: Verify wildcard used to test for
+	file existence/non-existence.
+
+2011-05-02  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/sort: Add a test for Savannah bug #33125.
+
+2011-04-17  David A. Wheeler  <dwheeler@dwheeler.com>
+
+	* scripts/features/shell_assignment: Regression for "!=" feature
+
+2010-11-06  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Fix known-good output for BS/NL changes.
+	* scripts/functions/call: Ditto.
+	* scripts/variables/special: Ditto.
+
+	* scripts/misc/bs-nl: New test suite for backslash/newline testing.
+
+2010-08-29  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/errors: Add new error message to output text.
+	* scripts/variables/SHELL: Ditto.
+	* scripts/targets/POSIX: Ditto.
+	* scripts/options/dash-k: Ditto.
+	* scripts/features/vpathplus: Ditto.
+	* scripts/features/patternrules: Ditto.
+	* scripts/features/parallelism: Ditto.
+
+2010-08-13  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/archives: New regression tests for archive
+	support.  Test for fix to Savannah bug #30612.
+
+	* run_make_tests.pl (set_more_defaults): Set a %FEATURES hash to
+	the features available in $(.FEATURES).
+
+2010-08-10  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/reinvoke: Ensure command line variable settings
+	are preserved across make re-exec.  Tests Savannah bug #30723.
+
+2010-07-28  Paul Smith  <psmith@gnu.org>
+
+	* scripts/targets/POSIX: Compatibility issues with Solaris (and
+	Tru64?); "false" returns different exit codes, and set -x shows
+	output with extra whitespace.  Run the commands by hand first to
+	find out what the real shell would do, then compare what make does.
+	* scripts/variables/SHELL: Ditto.
+
+2010-07-12  Paul Smith  <psmith@gnu.org>
+
+	* test_driver.pl: Add a new $perl_name containing the path to Perl.
+	* run_make_tests.pl (run_make_test): Replace the special string
+	#PERL# in a makefile etc. with the path the Perl executable so
+	makefiles can use it.
+
+	* scripts/targets/ONESHELL: Add a new set of regression tests for
+	the .ONESHELL feature.
+
+2010-07-06  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/SHELL: Test the new .SHELLFLAGS variable.
+
+	* scripts/targets/POSIX: New file.  Test the .POSIX special target.
+	Verify that enabling .POSIX changes the shell flags to set -e.
+
+2010-07-01  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/recursion: Add a space to separate command-line
+	args.  Fixes Savannah bug #29968.
+
+2009-11-12  Boris Kolpackov  <boris@codesynthesis.com>
+
+	* scripts/features/vpath3: Test for the new library search
+	behavior.
+
+2009-10-06  Boris Kolpackov  <boris@codesynthesis.com>
+
+	* scripts/features/se_explicit: Enable the test for now fixed
+	Savannah bug 25780.
+
+2009-10-06  Boris Kolpackov  <boris@codesynthesis.com>
+
+	* scripts/variables/undefine: Tests for the new undefine feature.
+
+2009-10-03  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Test for open Savannah bug #26846.
+
+	* scripts/variables/MAKE: Rewrite for new run_make_test() format.
+
+	* scripts/variables/MAKEFLAGS: Created.
+	Add test for Savannah bug #2216 (still open).
+
+	* scripts/features/include: Test for Savannah bug #102 (still open).
+
+2009-09-30  Boris Kolpackov  <boris@codesynthesis.com>
+
+	* scripts/features/include: Add diagnostics issuing tests for
+	cases where targets have been updated and failed with the
+	dontcare flag. Savannah bugs #15110, #25493, #12686, #17740.
+
+2009-09-28  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/shell: Add regression test for Savannah bug
+	#20513 (still open).
+
+	* scripts/features/se_explicit: Add regression tests for Savannah
+	bug #25780 (still open).
+
+	* run_make_tests.pl (valid_option): Add a new flag, -all([-_]?tests)?
+	that runs tests we know will fail.  This allows us to add
+	regression tests to the test suite for bugs that haven't been
+	fixed yet.
+
+2009-09-28  Boris Kolpackov  <boris@codesynthesis.com>
+
+	* scripts/features/patspecific_vars: Add a test for the shortest
+	stem first order.
+
+	* scripts/features/patternrules: Add a test for the shortest stem
+	first order.
+
+2009-09-24  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/se_implicit: Add a test for order-only
+	secondary expansion prerequisites.
+
+2009-09-23  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/patternrules: Test that we can remove pattern
+	rules, both single and multiple prerequisites.  Savannah bug #18622.
+
+	* scripts/features/echoing: Rework for run_make_test().
+
+2009-06-14  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/vpath: Verify we don't get bogus circular
+	dependency warnings if we choose a different file via vpath during
+	update.  Savannah bug #13529.
+
+2009-06-13  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/MAKEFILES: Verify that MAKEFILES included
+	files (and files included by them) don't set the default goal.
+	Savannah bug #13401.
+
+	* scripts/functions/wildcard: Test that wildcards with
+	non-existent glob matchers return empty.
+
+2009-06-09  Paul Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-B: Test the $? works correctly with -B.
+	Savannah bug #17825.
+
+	* scripts/features/patternrules: Test that dependencies of
+	"also_make" targets are created properly.  Savannah bug #19108.
+
+	* test_driver.pl (compare_output): Create a "run" file for failed
+	tests containing the command that was run.
+	(get_runfile): New function.
+
+	* run_make_tests.pl (valid_option): Enhanced support for valgrind:
+	allow memcheck and massif tools.
+
+	* scripts/features/patternrules: Have to comment out a line in the
+	first test due to backing out a change that broke the implicit
+	rule search algorithm.  Savannah bug #17752.
+	* scripts/misc/general4: Remove a test that is redundant with
+	patternrules.
+
+	* scripts/features/parallelism: Add a test for re-exec with
+	jobserver master override.  Savannah bug #18124.
+
+2009-06-08  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Add a test for continued target
+	vars after a semicolon.  Savannah bug #17521.
+
+2009-06-07  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/se_explicit: Make sure we catch defining
+	prereqs during snap_deps().  Savannah bug #24622.
+
+	* scripts/variables/automatic: Check prereq ordering when the
+	target with the recipe has no prereqs.  Savannah bug #21198.
+
+	* scripts/variables/LIBPATTERNS: Add a new set of test for
+	$(.LIBPATTERNS) (previously untested!)
+
+2009-06-04  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/SHELL: The export target-specific SHELL test
+	has an incorrect known-good-value.
+
+	* scripts/misc/general4: Check for whitespace (ffeed, vtab, etc.)
+
+	* scripts/features/se_explicit: Add tests for Savannah bug #24588.
+
+2009-05-31  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/DEFAULT_GOAL: Add tests for Savannah bug #25697.
+
+	* scripts/features/targetvars: Add tests of overrides for Savannah
+	bug #26207.
+	* scripts/features/patspecific_vars: Ditto.
+
+	* scripts/features/patternrules: Add a test for Savannah bug #26593.
+
+2009-05-30  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/flavors: Update with new variable flavor tests.
+	* scripts/variables/define: Create a new set of tests for
+	define/endef and move those aspects of the flavors suite here.
+
+2009-05-25  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Ditto.
+
+	* scripts/features/export: Test new variable parsing abilities.
+
+2009-02-23  Ramon Garcia  <ramon.garcia.f@gmail.com>
+
+	* scripts/variables/private: Create a new suite of tests for 'private'.
+
+2007-11-04  Paul Smith  <psmith@gnu.org>
+
+	* scripts/functions/eval: Update error message for command -> recipe.
+
+	* test_driver.pl (compare_output): Allow the answer to be a regex,
+	if surrounded by '/'.
+	* scripts/misc/close_stdout: Use a regex for the answer, since
+	sometimes the error will have a description and sometimes it won't.
+
+2007-09-10  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/special: Add tests for .RECIPEPREFIX variable.
+
+2007-08-15  Paul Smith  <psmith@gnu.org>
+
+	These test cases were contributed by
+	Icarus Sparry <savannah@icarus.freeuk.com> and J. David Bryan for
+	Savannah bugs #3330 and #15919.
+
+	* scripts/targets/SECONDARY: Add tests for Savannah bugs 3330 and
+	15919.
+
+	* scripts/features/parallelism: Add tests for wrong answer/hang
+	combining INTERMEDIATE, order-only prereqs, and parallelism.
+	See Savannah bugs 3330 and 15919.
+
+2007-07-13  Paul Smith  <psmith@gnu.org>
+
+	Install a timeout so tests can never loop infinitely.
+	Original idea and patch for a single-test version provided by
+	Icarus Sparry <savannah@icarus.freeuk.com>
+
+	* test_driver.pl (_run_command): New function: this is called by
+	other functions to actually run a command.  Before we run it,
+	install a SIGALRM handler and set up a timer to go off in the
+	future (default is 5s; this can be overridden by individual tests).
+	(run_command): Call it.
+	(run_command_with_output): Call it.
+
+	* run_make_tests.pl (run_make_with_options): Override the default
+	timeout if the caller requests it.
+	(run_make_test): Pass any timeout override to run_make_with_options.
+
+	* scripts/features/parallelism: Increase the timeout for long tests.
+	* scripts/options/dash-l: Ditto.
+
+2006-10-01  Paul Smith  <psmith@paulandlesley.org>
+
+	* run_make_tests.pl (set_more_defaults): Remove setting of LANG in
+	ENV here.  This doesn't always work.
+	* test_driver.pl (toplevel): Set LC_ALL to 'C' in the make
+	environment.  Fixes Savannah bug #16698.
+
+2006-09-30  Paul Smith  <psmith@paulandlesley.org>
+
+	* scripts/variables/automatic: Add back the test for bug #8154.
+
+2006-04-01  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/realpath: Don't run tests with multiple
+	initial slashes on Windows: those paths mean something different.
+
+2006-03-19  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Test that the jobserver is
+	properly managed when we have to re-exec the master instance of
+	make.
+
+2006-03-17  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/statipattrules: Add tests for bug #16053.
+
+2006-03-09  Paul Smith  <psmith@gnu.org>
+
+	* scripts/features/escape: Use "pre:" not "p:" to avoid conflicts
+	with DOS drive letters.  Fixes Savannah bug #15947.
+
+	* test_driver.pl (run_each_test): Set the status properly even
+	when a test fails to execute.  Fixes Savannah bug #15942.
+
+	* scripts/functions/foreach: Use a different environment variable
+	other than PATH to avoid differences with Windows platforms.
+	Fixes Savannah bug #15938.
+
+2006-03-05  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (set_more_defaults): Add CYGWIN_NT as a port
+	type W32.  Fixed Savannah bug #15937.
+
+	* scripts/features/default_names: Don't call error() when the test
+	fails.  Fixes Savannah bug #15941.
+
+2006-02-17  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Test a complex construction which
+	guarantees that we have to merge variable lists of different
+	sizes.  Tests for Savannah bug #15757.
+
+2006-02-15  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/error: Make sure filename/lineno information
+	is related to where the error is expanded, not where it's set.
+	* scripts/functions/warning: Ditto.
+	* scripts/functions/foreach: Check for different error conditions.
+	* scripts/functions/word: Ditto.
+	* scripts/variables/negative: Test some variable reference failure
+	conditions.
+	* scripts/options/warn-undefined-variables: Test the
+	--warn-undefined-variables flag.
+
+2006-02-09  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (set_more_defaults): Update valgrind support
+	for newer versions.
+	* test_driver.pl (toplevel): Skip all hidden files/directories (ones
+	beginning with ".").
+
+	* scripts/functions/andor: Tests for $(and ...) and $(or ...)
+	functions.
+
+2006-02-08  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/parallelism: Add a test for bug #15641.
+
+2006-02-06  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-W: Add a test for bug #15341.
+
+2006-01-03  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/automatic: Add a test for bug #8154.
+
+	* README: Update to reflect the current state of the test suite.
+
+2005-12-12  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism, scripts/functions/wildcard,
+	scripts/targets/FORCE, scripts/targets/PHONY,
+	scripts/targets/SILENT: Use the default setting for
+	$delete_command.  Fixes bug #15085.
+
+	* run_make_tests.pl (get_this_pwd) [VMS]: Use -no_ask with delete_file.
+
+2005-12-11  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/misc/general4: Test implicit rules with '$' in the
+	prereq list & prereq patterns.
+	* scripts/features/se_implicit: Add in .SECONDEXPANSION settings.
+
+2005-12-09  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/patternrules: Add a test for bug #13022.
+
+2005-12-07  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/double_colon: Add a test for bug #14334.
+
+2005-11-17  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/functions/flavor: Add a test for the flavor function.
+
+2005-11-14  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/variables/INCLUDE_DIRS: Add a test for the .INCLUDE_DIRS
+	special variable.
+
+2005-10-24  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/misc/general4: Test '$$' in prerequisites list.
+	* scripts/features/statipattrules: Rewrite to use run_make_test().
+	Add various static pattern info.
+	* scripts/features/se_statpat: Enable .SECONDEXPANSION target.
+	* scripts/features/se_explicit: Add tests for handling '$$' in
+	prerequisite lists with and without setting .SECONDEXPANSION.
+	* scripts/features/order_only: Convert to run_make_test().
+	* run_make_tests.pl (set_more_defaults): If we can't get the value
+	of $(MAKE) from make, then fatal immediately.
+
+2005-08-31  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (get_this_pwd): Require the POSIX module (in
+	an eval to trap errors) and if it exists, use POSIX::getcwd to
+	find the working directory.  If it doesn't exist, go back to the
+	previous methods.  This tries to be more accurate on Windows
+	systems.
+
+2005-08-29  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/abspath: Add some text to the error messages
+	to get a better idea of what's wrong.  Make warnings instead of
+	errors.
+
+	* scripts/features/patspecific_vars: Don't use "test", which is
+	UNIX specific.  Print the values and let the test script match
+	them.
+
+2005-08-25  Paul Smith  <psmith@gnu.org>
+
+	* scripts/variables/SHELL: Use a /./ prefix instead of //: the
+	former works better with non-UNIX environments.  Fixes Savannah
+	bug #14129.
+
+2005-08-13  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/functions/wildcard: Wrap calls to $(wildcard) with
+	$(sort) so that the resulting order is no longer filesystem-
+	dependent.
+
+2005-08-10  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/statipattrules: Add a test for Savannah bug #13881.
+
+2005-08-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Add a test for a bug reported by
+	Michael Matz (matz@suse.de) in which make exits without waiting
+	for all its children in some situations during parallel builds.
+
+2005-07-08  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl: Reset the environment to a clean value every
+	time before we invoke make.  I'm suspicious that the environment
+	isn't handled the same way in Windows as it is in UNIX, and some
+	variables are leaking out beyond the tests they are intended for.
+	Create an %extraENV hash tests can set to add more env. vars.
+	* tests/scripts/features/export: Change to use %extraENV.
+	* tests/scripts/functions/eval: Ditto.
+	* tests/scripts/functions/origin: Ditto.
+	* tests/scripts/options/dash-e: Ditto.
+	* tests/scripts/variables/SHELL: Ditto.
+
+2005-06-27  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-W: Use 'echo >>' instead of touch to update
+	files.
+	* scripts/features/reinvoke: Rewrite to be safer on systems with
+	subsecond timestamps.
+	* scripts/features/patternrules: False exits with different error
+	codes on different systems (for example, Linux => 1, Solaris => 255).
+
+	* scripts/options/dash-W: Set the timestamp to foo.x in the future,
+	to be sure it will be considered updated when it's remade.
+
+2005-06-26  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/shell: New test suite for the shell function.
+
+2005-06-25  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/include: Test include/-include/sinclude with no
+	arguments.  Tests fix for Savannah bug #1761.
+
+	* scripts/misc/general3: Implement comprehensive testing of
+	backslash-newline behavior in command scripts: various types of
+	quoting, fast path / slow path, etc.
+	Tests fix for Savannah bug #1332.
+
+	* scripts/options/symlinks: Test symlinks to non-existent files.
+	Tests fix for Savannah bug #13280.
+
+	* scripts/misc/general3: Test semicolons in variable references.
+	Tests fix for Savannah bug #1454.
+
+	* scripts/variables/MAKE_RESTARTS: New file: test the
+	MAKE_RESTARTS variable.
+	* scripts/options/dash-B: Test re-exec doesn't loop infinitely.
+	Tests fix for Savannah bug #7566.
+	* scripts/options/dash-W: New file: test the -W flag, including
+	re-exec infinite looping.
+
+2005-06-12  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/misc/close_stdout: Add a test for Savannah bug #1328.
+	This test only works on systems that have /dev/full (e.g., Linux).
+
+2005-06-09  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/foreach: Add a test for Savannah bug #11913.
+
+2005-05-31  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/include: Add a test for Savannah bug #13216.
+	* scripts/features/patternrules: Add a test for Savannah bug #13218.
+
+2005-05-13  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/conditionals: Add tests for the new if... else
+	if... endif syntax.
+
+2005-05-03  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/DEFAULT_GOAL: Rename DEFAULT_TARGET to
+	DEFAULT_GOAL.
+
+2005-05-02  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Add a test for exporting recursive
+	variables containing $(shell) calls.  Rewrite this script to use
+	run_make_test() everywhere.
+
+2005-04-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/targets/SECONDARY: Add a test for Savannah bug #12331.
+
+2005-03-15  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/variables/automatic: Add a test for Savannah bug #12320.
+
+2005-03-10  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/patternrules: Add a test for Savannah bug #12267.
+
+2005-03-09  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/variables/DEFAULT_TARGET: Add a test for Savannah
+	bug #12266.
+
+2005-03-04  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/patternrules: Add a test for Savannah bug #12202.
+
+2005-03-03  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/se_implicit: Add a test for stem
+	termination bug. Add a test for stem triple-expansion bug.
+
+	* scripts/features/se_statpat: Add a test for stem
+	triple-expansion bug.
+
+	* scripts/features/statipattrules: Change test #4 to reflect
+	new way empty prerequisite list is handled.
+
+
+2005-03-01  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/statipattrules: Add a test for
+	Savannah bug #12180.
+
+2005-02-28  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-q: Add a test for Savannah bug # 7144.
+
+	* scripts/options/symlinks: New file to test checking of symlink
+	timestamps.  Can't use filename dash-L because it conflicts with
+	dash-l on case-insensitive filesystems.
+
+	* scripts/variables/MAKEFILE_LIST, scripts/variables/MFILE_LIST:
+	Rename MAKEFILE_LIST test to MFILE_LIST, for systems that need 8.3
+	unique filenames.
+
+2005-02-28  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/variables/DEFAULT_TARGET: Test the .DEFAULT_TARGET
+	special variable.
+
+2005-02-27  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/se_explicit: Test the second expansion in
+	explicit rules.
+	* scripts/features/se_implicit: Test the second expansion in
+	implicit rules.
+	* scripts/features/se_statpat: Test the second expansion in
+	static pattern rules.
+	* scripts/variables/automatic: Fix to work with the second
+	expansion.
+
+	* scripts/misc/general4: Add a test for bug #12091.
+
+2005-02-27  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/eval: Check that eval of targets within
+	command scripts fails.  See Savannah bug # 12124.
+
+2005-02-26  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (compare_output): If a basic comparison of the
+	log and answer doesn't match, try harder: change all backslashes
+	to slashes and all CRLF to LF.  This helps on DOS/Windows systems.
+
+2005-02-09  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/recursion: Test command line variable settings:
+	only one instance of a given variable should be provided.
+
+2004-11-30  Boris Kolpackov  <boris@kolpackov.net>
+
+	* tests/scripts/functions/abspath: New file: test `abspath'
+	built-in function.
+
+	* tests/scripts/functions/realpath: New file: test `realpath'
+	built-in function.
+
+2004-11-28  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-C [WINDOWS32]: Add a test for bug #10252;
+	this doesn't really test anything useful in UNIX but...
+
+	* scripts/variables/SHELL: New file: test proper handling of SHELL
+	according to POSIX rules.  Fixes bug #1276.
+
+2004-10-21  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/functions/word: Test $(firstword ) and $(lastword ).
+
+2004-10-05  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/patspecific_vars: Test simple/recursive
+	variable expansion.
+
+2004-09-28  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/include: Test dontcare flag inheritance
+	when rebuilding makefiles.
+
+2004-09-27  Boris Kolpackov  <boris@kolpackov.net>
+
+	* scripts/features/patspecific_vars: Test exported variables.
+
+2004-09-22  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (run_make_test): Don't add newlines to the
+	makestring or answer if they are completely empty.
+
+	* scripts/features/patternrules: Rename from implicit_prereq_eval.
+
+	* scripts/test_template: Rework the template.
+
+2004-09-21  Boris Kolpackov  <boris@kolpackov.net>
+
+	* run_make_tests.pl: Change `#!/usr/local/bin/perl' to be
+	`#!/usr/bin/env perl'.
+
+	* scripts/features/implicit_prereq_eval: Test implicit rule
+	prerequisite evaluation code.
+
+2004-09-21  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (run_make_test): Enhance to allow the make
+	string to be undef: in that case it reuses the previous make
+	string.  Allows multiple tests on the same makefile.
+
+	* scripts/variables/flavors: Add some tests for prefix characters
+	interacting with define/endef variables.
+
+2004-09-20  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/substitution: Rewrite to use run_make_test()
+	interface, and add test for substitution failures reported by
+	Markus Mauhart <qwe123@chello.at>.
+
+2004-03-22  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (run_each_test, toplevel, compare_output): Change
+	to track both the testing categories _AND_ the number of
+	individual tests, and report both sets of numbers.
+
+2004-02-21  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/origin: Set our own environment variable
+	rather than relying on $HOME.
+
+2004-01-21  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/conditionals: Test arguments to ifn?def which
+	contain whitespace (such as a function that is evaluated).  Bug
+	#7257.
+
+2004-01-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/order_only: Test order-only prerequisites in
+	pattern rules (patch #2349).
+
+2003-11-02  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/if: Test if on conditionals with trailing
+	whitespace--bug #5798.
+
+	* scripts/functions/eval: Test eval in a non-file context--bug #6195.
+
+2003-04-19  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/patspecific_vars: Test multiple patterns
+	matching the same target--Bug #1405.
+
+2003-04-09  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (set_more_defaults): A new $port_type of
+	'OS/2' for (surprise!) OS/2.  Also choose a wait time of 2 seconds
+	for OS/2.
+
+2003-03-28  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/targets/SECONDARY: Test the "global" .SECONDARY (with
+	not prerequisites)--Bug #2515.
+
+2003-01-30  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Test very long target-specific
+	variable definition lines (longer than the default make buffer
+	length).  Tests patch # 1022.
+
+	* scripts/functions/eval: Test very recursive $(eval ...) calls
+	with simple variable expansion (bug #2238).
+
+	* scripts/functions/word: Test error handling for word and
+	wordlist functions (bug #2407).
+
+2003-01-22  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/call: Test recursive argument masking (bug
+	#1744).
+
+2002-10-25  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/eval: Test using $(eval ...) inside
+	conditionals (Bug #1516).
+
+2002-10-14  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-t: Add a test for handling -t on targets
+	with no commands (Bug #1418).
+
+2002-10-13  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Add a test for exporting
+	target-specific vars (Bug #1391).
+
+2002-10-05  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/automatic: Add tests for $$(@), $${@}, $${@D},
+	and $${@F}.
+
+2002-09-23  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/escape: Test handling of escaped comment
+	characters in targets and prerequisites.
+
+2002-09-18  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/export: Test export/unexport of multiple
+	variables in a single command.
+
+2002-09-17  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Tests for Bug #940: test
+	target-specific and pattern-specific variables in conjunction with
+	double-colon targets.
+
+2002-09-10  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (compare_output): Match the new format for time
+	skew error messages.
+
+	* scripts/features/export: Created.  Add tests for export/unexport
+	capabilities, including exporting/unexporting expanded variables.
+
+	* scripts/features/conditionals: Add a test for expanded variables
+	in ifdef conditionals.
+
+2002-09-04  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/reinvoke: Change touch/sleep combos to utouch
+	invocations.
+	* scripts/features/vpathgpath: Ditto.
+	* scripts/features/vpathplus: Ditto.
+	* scripts/options/dash-n: Ditto.
+	* scripts/targets/INTERMEDIATE: Ditto.
+	* scripts/targets/SECONDARY: Ditto.
+
+	* scripts/options/dash-t: Added a test for the -t bug fixed by
+	Henning Makholm.  This test was also contributed by Henning.
+
+	* scripts/misc/general4: Add a test suite for obscure algorithmic
+	features of make.  First test: make sure creation subdirectories
+	as prerequisites of targets works properly.
+
+	* scripts/misc/version: Remove this bogus test.
+
+2002-08-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/misc/general3: Add a test for makefiles that don't end
+	in newlines.
+
+	* scripts/variables/special: Create tests for the special
+	variables (.VARIABLES and .TARGETS).  Comment out .TARGETS test
+	for now as it's not yet supported.
+
+2002-08-01  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-B: Add a test for the new -B option.
+
+2002-07-11  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (valid_option): Add support for Valgrind.  Use
+	-valgrind option to the test suite.
+	(set_more_defaults): Set up the file descriptor to capture
+	Valgrind output.  We have to unset its close-on-exec flag; we
+	hardcode the value for F_SETFD (2) rather than load it; hopefully
+	this will help us avoid breaking the Windows/DOS test suite.
+
+2002-07-10  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/automatic: Add some tests for $$@, $$(@D), and
+	$$(@F).
+
+	* test_driver.pl (utouch): Create a new function that creates a
+	file with a specific timestamp offset.  Use of this function will
+	let us avoid lots of annoying sleep() invocations in the tests
+	just to get proper timestamping, which will make the tests run a
+	lot faster.  So far it's only used in the automatic test suite.
+
+2002-07-09  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/automatic: Create a test for automatic variables.
+
+2002-07-08  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/order_only: Test new order-only prerequisites.
+
+2002-07-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/eval: Test new function.
+	* scripts/functions/value: Test new function.
+	* scripts/variables/MAKEFILE_LIST: Test new variable.
+
+2002-04-28  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/call: New test: transitive closure
+	implementation using $(call ...) to test variable recursion.
+
+2002-04-21  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (compare_dir_tree): Ignore CVS and RCS
+	directories in the script directories.
+
+2001-05-02  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/flavors: Test define/endef scripts where only
+	one of the command lines is quiet.
+
+2000-06-22  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-q: New file; test the -q option.  Includes
+	a test for PR/1780.
+
+2000-06-21  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Added a test for PR/1709: allowing
+	semicolons in target-specific variable values.
+
+2000-06-19  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/addsuffix: Test for an empty final argument.
+	Actually this bug might have happened for any function, but this
+	one was handy.
+
+2000-06-17  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/options/general: If parallel jobs are not supported,
+	expect a warning message from Make.
+
+2000-06-15  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/options/general: Don't try -jN with N != 1 if parallel
+	jobs are not supported.
+
+2000-05-24  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/general: Test general option processing (PR/1716).
+
+2000-04-11  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/strip: Test empty value to strip (PR/1689).
+
+2000-04-08  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/features/reinvoke: Sleep before updating the target
+	files in the first test, to ensure its time stamp really gets
+	newer; otherwise Make might re-exec more than once.
+
+2000-04-07  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/features/double_colon: Don't run the parallel tests if
+	parallel jobs aren't supported.
+
+2000-04-04  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/word: wordlist doesn't swap arguments anymore.
+
+2000-03-27  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/statipattrules: Test that static pattern rules
+	whose prerequisite patterns resolve to empty strings throw an
+	error (instead of dumping core).  Fixes PR/1670.
+
+	* scripts/features/reinvoke: Make more robust by touching "b"
+	first, to ensure it's not newer than "a".
+	Reported by Marco Franzen <Marco.Franzen@Thyron.com>.
+	* scripts/options/dash-n: Ditto.
+
+	* scripts/functions/call: Whoops.  The fix to PR/1527 caused
+	recursive invocations of $(call ...) to break.  I can't come up
+	with any way to get both working at the same time, so I backed out
+	the fix to 1527 and added a test case for recursive calls.  This
+	also tests the fix for PR/1610.
+
+	* scripts/features/double_colon: Test that circular dependencies
+	in double-colon rule sets are detected correctly (PR/1671).
+
+2000-03-26  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/targets/INTERMEDIATE: Test that make doesn't remove
+	.INTERMEDIATE files when given on the command line (PR/1669).
+
+2000-03-08  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-k: Add a test for error detection by
+	multiple targets depending on the same prerequisite with -k.
+	For PR/1634.
+
+2000-02-07  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/escape: Add a test for backslash-escaped spaces
+	in a target name (PR/1586).
+
+2000-02-04  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/patspecific_vars: Add a test for pattern-specific
+	target variables inherited from the parent target (PR/1407).
+
+2000-02-02  Paul D. Smith  <psmith@gnu.org>
+
+	* run_make_tests.pl (set_more_defaults): Hard-code the LANG to C
+	to make sure sorting order, etc. is predictable.
+	Reported by Andreas Jaeger <aj@suse.de>.
+
+	* run_make_tests.pl (set_more_defaults): Set the $wtime variable
+	depending on the OS.  Eli Zaretskii <eliz@is.elta.co.il> reports
+	this seems to need to be *4* on DOS/Windows, not just 2.  Keep it
+	1 for other systems.
+	* scripts/features/vpathplus (touchfiles): Use the $wtime value
+	instead of hardcoding 2.
+	* scripts/targets/SECONDARY: Ditto.
+	* scripts/targets/INTERMEDIATE: Ditto.
+
+2000-01-27  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (toplevel): Don't try to run test scripts which
+	are really directories.
+
+2000-01-23  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/include: Remove a check; the fix caused more
+	problems than the error, so I removed it and removed the test for
+	it.
+
+2000-01-11  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/call: Add a test for PR/1517 and PR/1527: make
+	sure $(call ...) doesn't eval its arguments and that you can
+	invoke foreach from it without looping forever.
+
+1999-12-15  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/targets/INTERMEDIATE: Add a test for PR/1423: make sure
+	.INTERMEDIATE settings on files don't disable them as implicit
+	intermediate possibilities.
+
+1999-12-01  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/double_colon: Add a test for PR/1476: Try
+	double-colon rules as non-goal targets and during parallel builds
+	to make sure they're handled serially.
+
+1999-11-17  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/functions/if: Add a test for PR/1429: put some text
+	after an if-statement to make sure it works.
+
+	* scripts/features/targetvars: Add a test for PR/1380: handling +=
+	in target-specific variable definitions correctly.
+
+1999-10-15  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/variables/MAKEFILES: This was really broken: it didn't
+	test anything at all, really.  Rewrote it, plus added a test for
+	PR/1394.
+
+1999-10-13  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/options/dash-n: Add a test for PR/1379: "-n doesn't
+	behave properly when used with recursive targets".
+
+1999-10-08  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/targetvars: Add a check for PR/1378:
+	"Target-specific vars don't inherit correctly"
+
+1999-09-29  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (get_osname): Change $fancy_file_names to
+	$short_filenames and reverse the logic.
+	(run_each_test): Change test of non-existent $port_host to use
+	$short_filenames--problem reported by Eli Zaretskii.
+
+1999-09-23  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Add a check to ensure that the
+	jobserver works when we re-invoke.  Also cleaned up the tests a
+	little, reducing the number of rules we use so the test won't need
+	as many "sleep" commands.
+
+1999-09-16  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/reinvoke: Remove invocations of "touch" in
+	makefiles.  See the comments on the touch function rewrite below.
+	Note that UNIX touch behaves the same way if the file already
+	exists: it sets the time to the _local_ time.  We don't want
+	this.  This is probably a good tip for makefile writers in
+	general, actually... where practical.
+	* scripts/options/dash-l: Ditto.
+	* scripts/options/dash-n: Ditto.
+
+	* test_driver.pl (run_each_test): In retrospect, I don't like the
+	.lN/.bN/.dN postfix required by DOS.  So, for non-DOS systems I
+	changed it back to use .log, .base, and .diff.
+
+	* run_make_tests.pl (set_more_defaults): Move the check for the
+	make pathname to here from set_defaults (that's too early since it
+	happens before the command line processing).
+	Create a new variable $port_type, calculated from $osname, to
+	specify what kind of system we're running on.  We should integrate
+	the VOS stuff here, too.
+	(valid_option): Comment out the workdir/-work stuff so people
+	won't be fooled into thinking it works... someone needs to fix
+	this, though!
+
+	* scripts/functions/origin: Use $port_type instead of $osname.
+	* scripts/functions/foreach: Ditto.
+	* scripts/features/default_names: Ditto.
+
+1999-09-15  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (touch): Rewrite this function.  Previously it
+	used to use utime() to hard-set the time based on the current
+	local clock, or, if the file didn't exist, it merely created it.
+	This mirrors exactly what real UNIX touch does, but it fails badly
+	on networked filesystems where the FS server clock is skewed from
+	the local clock: normally modifying a file causes it to get a mod
+	time based on the _server's_ clock.  Hard-setting it based on the
+	_local_ clock causes gratuitous errors and makes the tests
+	unreliable except on local filesystems.  The new function will
+	simply modify the file, allowing the filesystem to set the mod
+	time as it sees fit.
+
+	* scripts/features/parallelism: The second test output could
+	change depending on how fast some scripts completed; use "sleep"
+	to force the order we want.
+
+	* test_driver.pl (toplevel): A bug in Perl 5.000 to Perl 5.004
+	means that "%ENV = ();" doesn't do the right thing.  This worked
+	in Perl 4 and was fixed in Perl 5.004_01, but use a loop to delete
+	the environment rather than require specific versions.
+
+	* run_make_tests.pl (set_more_defaults): Don't use Perl 5 s///
+	modifier "s", so the tests will run with Perl 4.
+	(set_more_defaults): Set $pure_log to empty if there's no -logfile
+	option in PURIFYOPTIONS.
+	(setup_for_test): Don't remove any logs unless $pure_log is set.
+
+1999-09-15  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/features/reinvoke: Put the SHELL definition in the right
+	test makefile.
+
+1999-09-15  Paul D. Smith  <psmith@gnu.org>
+
+	ChangeLog file for the test suite created.
+
+
+Copyright (C) 1992-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/tests/NEWS b/tests/NEWS
new file mode 100644
index 0000000..584f4a4
--- /dev/null
+++ b/tests/NEWS
@@ -0,0 +1,178 @@
+Changes from 0.4.9 to 3.78 (Sep 6, 1999):
+
+    Lots of new tests.  Renamed to follow the GNU make scheme.  Also
+    added some support for using Purify with make.
+
+    Rob Tulloh contributed some changes to get the test suite running on
+    NT; I tweaked them a bit (hopefully I didn't break anything!)  Note
+    that NT doesn't grok the self-exec funkiness that Unix shells use,
+    so instead I broke that out into a separate shell script
+    "run_make_tests" that invokes perl with the (renamed) script
+    run_make_tests.pl.
+
+    Eli Zaretski contributed changes to get the test suite running on
+    DOS with DJGPP.  I also meddled in these somewhat.
+
+    If you're on DOS or NT you should run "perl.exe run_make_tests.pl ..."
+    If you're on Unix, you can continue to run "./run_make_tests ..." as
+    before.
+
+Changes from 0.4.8 to 0.4.9 (May 14, 1998):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Add some perl to test_driver.pl to strip out GNU make clock skew
+    warning messages from the output before comparing it to the
+    known-good output.
+
+    A new test for escaped :'s in filenames (someone on VMS found this
+    didn't work anymore in 3.77): scripts/features/escape.
+
+Changes from 0.4.7 to 0.4.8 (May 14, 1998):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    New tests for features to be included in GNU make 3.77.
+
+Changes from 0.4.6 to 0.4.7 (August 18, 1997):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Reworked some tests to make sure they all work with both perl4 and perl5.
+
+    Work around a bug in perl 5.004 which doesn't clean the environment
+    correctly in all cases (fixed in at least 5.004_02).
+
+    Updated functions/strip to test for newline stripping.
+
+    Keep a $PURIFYOPTIONS env variable if present.
+
+Changes from 0.4.5 to 0.4.6 (April 07, 1997):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Updated to work with GNU make 3.76 (and pretests).
+
+    Added new tests and updated existing ones.  Note that the new tests
+    weren't tested with perl 4, however I think they should work.
+
+    Ignore any tests whose filenames end in "~", so that Emacs backup
+    files aren't run.
+
+Changes from 0.4.4 to 0.4.5 (April 29, 1995):
+
+    Updated to be compatible with perl 5.001 as well as 4.036.
+
+    Note: the test suite still won't work on 14-char filesystems
+    (sorry, Kaveh), but I will get to it.
+
+    Also, some tests and stuff still haven't made it in because I
+    haven't had time to write the test scripts for them.  But they,
+    too, will get in eventually.  Contributions of scripts (i.e., tests
+    that I can just drop in) are particularly welcome and will be
+    incorporated immediately.
+
+Changes from 0.4.3 to 0.4.4 (March 1995):
+
+    Updated for changes in make 3.72.12, and to ignore CVS directories
+    (thanks go to Jim Meyering for the patches for this).
+
+    Fixed uname call to not make a mess on BSD/OS 2.0 (whose uname -a
+    is very verbose).  Let me know if this doesn't work correctly on
+    your system.
+
+    Changed to display test name while it is running, not just when it
+    finishes.
+
+    Note: the test suite still won't work on 14-char filesystems
+    (sorry, Kaveh), but I will get to it.
+
+    Also, some tests and stuff still haven't made it in because I
+    haven't had time to write the test scripts for them.  But they,
+    too, will get in eventually.
+
+Changes from 0.4 to 0.4.3 (October 1994):
+
+    Fixed bugs (like dependencies on environment variables).
+
+    Caught up with changes in make.
+
+    The load_limit test should now silently ignore a failure due to
+    make not being able to read /dev/kmem.
+
+    Reorganized tests into subdirs and renamed lots of things so that
+    those poor souls who still have to deal with 14-char filename
+    limits won't hate me any more.  Thanks very much to Kaveh R. Ghazi
+    <ghazi@noc.rutgers.edu> for helping me with the implementation and
+    testing of these changes, and for putting up with all my whining
+    about it...
+
+    Added a $| = 1 so that systems that don't seem to automatically
+    flush their output for some reason will still print all the
+    output.  I'd hate for someone to miss out on the smiley that
+    you're supposed to get when all the tests pass... :-)
+
+Changes from 0.3 to 0.4 (August 1993):
+
+    Lost in the mists of time (and my hurry to get it out before I
+    left my job).
+
+Changes from 0.2 to 0.3 (9-30-92):
+
+    Several tests fixed to match the fact that MAKELEVEL > 0 or -C now
+    imply -w.
+
+    parallel_execution test fixed to not use double colon rules any
+    more since their behavior has changed.
+
+    errors_in_commands test fixed to handle different error messages
+    and return codes from rm.
+
+    Several tests fixed to handle -make_path with a relative path
+    and/or a name other than "make" for make.
+
+    dash-e-option test fixed to use $PATH instead of $USER (since the
+    latter does not exist on some System V systems).  This also
+    removes the dependency on getlogin (which fails under certain
+    weird conditions).
+
+    test_driver_core changed so that you can give a test name like
+    scripts/errors_in_commands and it will be handled correctly (handy
+    if you have a shell with filename completion).
+
+Changes from 0.1 to 0.2 (5-4-92):
+
+    README corrected to require perl 4.019, not 4.010.
+
+    -make_path replaces -old.
+
+    errors_in_commands test updated for change in format introduced in
+    make 3.62.6.
+
+    test_driver_core now uses a better way of figuring what OS it is
+    running on (thanks to meyering@cs.utexas.edu (Jim Meyering) for
+    suggesting this, as well as discovering the hard way that the old
+    way (testing for /mnt) fails on his machine).
+
+    Some new tests were added.
+
+
+-------------------------------------------------------------------------------
+Copyright (C) 1992-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
diff --git a/tests/README b/tests/README
new file mode 100644
index 0000000..3b699ee
--- /dev/null
+++ b/tests/README
@@ -0,0 +1,102 @@
+The test suite was originally written by Steve McGee and Chris Arthur.
+It is covered by the GNU General Public License (Version 2), described
+in the file COPYING.  It has been maintained as part of GNU make proper
+since GNU make 3.78.
+
+This entire test suite, including all test files, are copyright and
+distributed under the following terms:
+
+ -----------------------------------------------------------------------------
+ Copyright (C) 1992-2014 Free Software Foundation, Inc.
+ This file is part of GNU Make.
+
+ GNU Make is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 3 of the License, or (at your option) any later
+ version.
+
+ GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program.  If not, see <http://www.gnu.org/licenses/>.
+ -----------------------------------------------------------------------------
+
+The test suite requires Perl.  These days, you should have at least Perl
+5.004 (available from ftp.gnu.org, and portable to many machines).  It
+used to work with Perl 4.036 but official support for Perl 4.x was
+abandoned a long time ago, due to lack of testbeds, as well as interest.
+
+The test suite assumes that the first "diff" it finds on your PATH is
+GNU diff, but that only matters if a test fails.
+
+To run the test suite on a UNIX system, use "perl ./run_make_tests"
+(or just "./run_make_tests" if you have a perl on your PATH).
+
+To run the test suite on Windows NT or DOS systems, use
+"perl.exe ./run_make-tests.pl".
+
+By default, the test engine picks up the first executable called "make"
+that it finds in your path.  You may use the -make_path option (i.e.,
+"perl run_make_tests -make_path /usr/local/src/make-3.78/make") if
+you want to run a particular copy.  This now works correctly with
+relative paths and when make is called something other than "make" (like
+"gmake").
+
+Tests cannot end with a "~" character, as the test suite will ignore any
+that do (I was tired of having it run my Emacs backup files as tests :))
+
+Also, sometimes the tests may behave strangely on networked
+filesystems.  You can use mkshadow to create a copy of the test suite in
+/tmp or similar, and try again.  If the error disappears, it's an issue
+with your network or file server, not GNU make (I believe).  This
+shouldn't happen very often anymore: I've done a lot of work on the
+tests to reduce the impacts of this situation.
+
+The options/dash-l test will not really test anything if the copy of
+make you are using can't obtain the system load.  Some systems require
+make to be setgid sys or kmem for this; if you don't want to install
+make just to test it, make it setgid to kmem or whatever group /dev/kmem
+is (i.e., "chgrp kmem make;chmod g+s make" as root).  In any case, the
+options/dash-l test should no longer *fail* because make can't read
+/dev/kmem.
+
+A directory named "work" will be created when the tests are run which
+will contain any makefiles and "diff" files of tests that fail so that
+you may look at them afterward to see the output of make and the
+expected result.
+
+There is a -help option which will give you more information about the
+other possible options for the test suite.
+
+
+Open Issues
+-----------
+
+The test suite has a number of problems which should be addressed.  One
+VERY serious one is that there is no real documentation.  You just have
+to see the existing tests.  Use the newer tests: many of the tests
+haven't been updated to use the latest/greatest test methods.  See the
+ChangeLog in the tests directory for pointers.
+
+The second serious problem is that it's not parallelizable: it scribbles
+all over its installation directory and so can only test one make at a
+time.  The third serious problem is that it's not relocatable: the only
+way it works when you build out of the source tree is to create
+symlinks, which doesn't work on every system and is bogus to boot.  The
+fourth serious problem is that it doesn't create its own sandbox when
+running tests, so that if a test forgets to clean up after itself that
+can impact future tests.
+
+
+Bugs
+----
+
+Any complaints/suggestions/bugs/etc. for the test suite itself (as
+opposed to problems in make that the suite finds) should be handled the
+same way as normal GNU make bugs/problems (see the README for GNU make).
+
+
+                                                Paul D. Smith
+						Chris Arthur
diff --git a/tests/config-flags.pm b/tests/config-flags.pm
new file mode 100644
index 0000000..903c468
--- /dev/null
+++ b/tests/config-flags.pm
@@ -0,0 +1,19 @@
+# This is a -*-perl-*- script
+#
+# Set variables that were defined by configure, in case we need them
+# during the tests.
+
+%CONFIG_FLAGS = (
+    AM_LDFLAGS   => '-Wl,--export-dynamic',
+    AR           => 'ar',
+    CC           => 'gcc',
+    CFLAGS       => '-g -O2',
+    CPP          => 'gcc -E',
+    CPPFLAGS     => '',
+    GUILE_CFLAGS => '-pthread -I/usr/include/guile/2.0  ',
+    GUILE_LIBS   => '-lguile-2.0 -lgc  ',
+    LDFLAGS      => '',
+    LIBS         => '-ldl '
+);
+
+1;
diff --git a/tests/config-flags.pm.in b/tests/config-flags.pm.in
new file mode 100644
index 0000000..29ba146
--- /dev/null
+++ b/tests/config-flags.pm.in
@@ -0,0 +1,19 @@
+# This is a -*-perl-*- script
+#
+# Set variables that were defined by configure, in case we need them
+# during the tests.
+
+%CONFIG_FLAGS = (
+    AM_LDFLAGS   => '@AM_LDFLAGS@',
+    AR           => '@AR@',
+    CC           => '@CC@',
+    CFLAGS       => '@CFLAGS@',
+    CPP          => '@CPP@',
+    CPPFLAGS     => '@CPPFLAGS@',
+    GUILE_CFLAGS => '@GUILE_CFLAGS@',
+    GUILE_LIBS   => '@GUILE_LIBS@',
+    LDFLAGS      => '@LDFLAGS@',
+    LIBS         => '@LIBS@'
+);
+
+1;
diff --git a/tests/config_flags_pm.com b/tests/config_flags_pm.com
new file mode 100755
index 0000000..3f5adff
--- /dev/null
+++ b/tests/config_flags_pm.com
@@ -0,0 +1,53 @@
+$!
+$! config_flags_pm.com  - Build config-flags.pm on VMS.
+$!
+$! Just good enough to run the self tests for now.
+$!
+$! Copyright (C) 2014 Free Software Foundation, Inc.
+$! This file is part of GNU Make.
+$!
+$! GNU Make is free software; you can redistribute it and/or modify it under
+$! the terms of the GNU General Public License as published by the Free Software
+$! Foundation; either version 3 of the License, or (at your option) any later
+$! version.
+$!
+$! GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+$! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+$! FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+$! details.
+$!
+$! You should have received a copy of the GNU General Public License along with
+$! this program.  If not, see <http://www.gnu.org/licenses/>.
+$!
+$!
+$ open/read cfpm_in config-flags.pm.in
+$!
+$ outfile = "sys$disk:[]config-flags.pm"
+$!
+$ cflags = "/include=([],[.glob]"
+$!
+$ create 'outfile'
+$ open/append cfpm 'outfile'
+$!
+$cfpm_read_loop:
+$   read cfpm_in/end=cfpm_read_loop_end line_in
+$   line_in_len = f$length(line_in)
+$   if f$locate("@", line_in) .lt. line_in_len
+$   then
+$       part1 = f$element(0, "@", line_in)
+$       key = f$element(1, "@", line_in)
+$       part2 = f$element(2, "@", line_in)
+$       value = ""
+$       if key .eqs. "CC" then value = "CC"
+$       if key .eqs. "CPP" then value = "CPP"
+$       if key .eqs. "CFLAGS" then value = cflags
+$       if key .eqs. "GUILE_CFLAGS" then value = cflags
+$       write cfpm part1, value, part2
+$       goto cfpm_read_loop
+$   endif
+$   write cfpm line_in
+$   goto cfpm_read_loop
+$cfpm_read_loop_end:
+$ close cfpm_in
+$ close cfpm
+$!
diff --git a/tests/guile.supp b/tests/guile.supp
new file mode 100644
index 0000000..9e9b01b
--- /dev/null
+++ b/tests/guile.supp
@@ -0,0 +1,31 @@
+# Guile valgrind suppression file
+# Created with Guile 1.8.7
+
+# --- Garbage collection
+{
+  guilegc
+  Memcheck:Cond
+  ...
+  fun:scm_gc_for_newcell
+}
+{
+  guilegc
+  Memcheck:Value4
+  ...
+  fun:scm_gc_for_newcell
+}
+{
+  guilegc
+  Memcheck:Value8
+  ...
+  fun:scm_gc_for_newcell
+}
+
+
+# -- scm_alloc_struct
+{
+  guileheap
+  Memcheck:Leak
+  ...
+  fun:scm_alloc_struct
+}
diff --git a/tests/mkshadow b/tests/mkshadow
new file mode 100755
index 0000000..aa9b3bc
--- /dev/null
+++ b/tests/mkshadow
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# Simple script to make a "shadow" test directory, using symbolic links.
+# Typically you'd put the shadow in /tmp or another local disk
+#
+# Copyright (C) 1992-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+case "$1" in
+  "") echo 'Usage: mkshadow <destdir>'; exit 1 ;;
+esac
+
+dest="$1"
+
+if [ ! -d "$dest" ]; then
+  echo "Destination directory '$dest' must exist!"
+  exit 1
+fi
+
+if [ ! -f run_make_tests ]; then
+  echo "The current directory doesn't appear to contain the test suite!"
+  exit 1
+fi
+
+suite=`pwd | sed 's%^/tmp_mnt%%'`
+name=`basename "$suite"`
+
+files=`echo *`
+
+set -e
+
+mkdir "$dest/$name"
+cd "$dest/$name"
+
+ln -s "$suite" .testdir
+
+for f in $files; do
+  ln -s .testdir/$f .
+done
+
+rm -rf work
+
+echo "Shadow test suite created in '$dest/$name'."
+exit 0
diff --git a/tests/run_make_tests b/tests/run_make_tests
new file mode 100755
index 0000000..b68b784
--- /dev/null
+++ b/tests/run_make_tests
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec perl $0.pl ${1+"$@"}
diff --git a/tests/run_make_tests.com b/tests/run_make_tests.com
new file mode 100755
index 0000000..2f17f7f
--- /dev/null
+++ b/tests/run_make_tests.com
@@ -0,0 +1,272 @@
+$! Test_make.com
+$!
+$! This is a wrapper for the GNU make perl test programs on VMS.
+$!
+$! Parameter "-help" for description on how to use described below.
+$!
+$! Copyright (C) 2014 Free Software Foundation, Inc.
+$! This file is part of GNU Make.
+$!
+$! GNU Make is free software; you can redistribute it and/or modify it under
+$! the terms of the GNU General Public License as published by the Free Software
+$! Foundation; either version 3 of the License, or (at your option) any later
+$! version.
+$!
+$! GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+$! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+$! FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+$! details.
+$!
+$! You should have received a copy of the GNU General Public License along with
+$! this program.  If not, see <http://www.gnu.org/licenses/>.
+$!
+$!
+$! Allow more than 8 paramters with using commas as a delimiter.
+$!
+$ params = "''p1',''p2',''p3',''p4',''p5',''p6',''p7',''p8'"
+$!
+$ test_flags = ",verbose,detail,keep,usage,help,debug,"
+$ test_flags_len = f$length(test_flags)
+$ verbose_flag = ""
+$ detail_flag = ""
+$ keep_flag = ""
+$ usage_flag = ""
+$ help_flag = ""
+$ debug_flag = ""
+$!
+$ ignored_options = "profile,make,srcdir,valgrind,memcheck,massif,"
+$ ignored_option_len = f$length(ignored_options)
+$!
+$ testname = ""
+$ make :== $bin:make.exe"
+$!
+$ i = 0
+$param_loop:
+$ param = f$element(i, ",", params)
+$ i = i + 1
+$ if param .eqs. "" then goto param_loop
+$ if param .eqs. "," then goto param_loop_end
+$ param_len = f$length(param)
+$ if f$locate("/", param) .lt. param_len
+$ then
+$   if testname .nes. ""
+$   then
+$       write sys$output "Only the last test name specified will be run!"
+$   endif
+$   testname = param
+$   goto param_loop
+$ endif
+$ lc_param = f$edit(param,"LOWERCASE") - "-"
+$ if f$locate(",''lc_param',", ignored_options) .lt. ignored_option_len
+$ then
+$   write sys$output "parameter ''param' is ignored on VMS for now."
+$   goto param_loop
+$ endif
+$ if f$locate(",''lc_param',", test_flags) .lt. test_flags_len
+$ then
+$   'lc_param'_flag = "-" + lc_param
+$   goto param_loop
+$ endif
+$   write sys$output "parameter ''param' is not known to VMS."
+$ goto param_loop
+$!
+$param_loop_end:
+$!
+$no_gnv = 1
+$no_perl = 1
+$!
+$!  Find GNV 2.1.3 + manditory updates
+$!  If properly updated, the GNV$GNU logical name is present.
+$!  Updated GNV utilities have a gnv$ prefix on them.
+$   gnv_root = f$trnlnm("GNV$GNU", "LNM$SYSTEM_TABLE")
+$   if gnv_root .nes. ""
+$   then
+$       no_gnv = 0
+$       ! Check for update ar utility.
+$       new_ar = "gnv$gnu:[usr.bin]gnv$ar.exe"
+$       if f$search(new_ar) .nes. ""
+$       then
+$           ! See if a new port of ar exists.
+$           ar :== $'new_ar'
+$       else
+$           ! Fall back to legacy GNV AR wrapper.
+$           old_ar = "gnv$gnu:[bin]ar.exe"
+$           if f$search(old_ar) .nes. ""
+$           then
+$               ar :== $'old_ar'
+$           else
+$               no_gnv = 1
+$           endif
+$       endif
+$       ! Check for updated bash
+$       if no_gnv .eq. 0
+$       then
+$           new_bash = "gnv$gnu:[bin]gnv$bash.exe"
+$           if f$search(new_bash) .nes. ""
+$           then
+$               bash :== $'new_bash'
+$               sh :== $'new_bash'
+$           else
+$               no_gnv = 1
+$           endif
+$       endif
+$       ! Check for updated coreutils
+$       if no_gnv .eq. 0
+$       then
+$           new_cat = "gnv$gnu:[bin]gnv$cat.exe"
+$           if f$search(new_cat) .nes. ""
+$           then
+$               cat :== $'new_cat'
+$               cp :== $gnv$gnu:[bin]gnv$cp.exe
+$               echo :== $gnv$gnu:[bin]gnv$echo.exe
+$               false :== $gnv$gnu:[bin]gnv$false.exe
+$               true :== $gnv$gnu:[bin]gnv$true.exe
+$               touch :== $gnv$gnu:[bin]gnv$touch.exe
+$               mkdir :== $gnv$gnu:[bin]gnv$mkdir.exe
+$               rm :== $gnv$gnu:[bin]gnv$rm.exe
+$               sleep :== $gnv$gnu:[bin]gnv$sleep.exe
+$           else
+$               no_gnv = 1
+$           endif
+$       endif
+$       ! Check for updated diff utility.
+$       if no_gnv .eq. 0
+$       then
+$           new_diff = "gnv$gnu:[usr.bin]gnv$diff.exe"
+$           if f$search(new_diff) .nes. ""
+$           then
+$               ! See if a new port of diff exists.
+$               diff :== $'new_diff'
+$           else
+$               ! Fall back to legacy GNV diff
+$               old_diff = "gnv$gnu:[bin]diff.exe"
+$               if f$search(old_diff) .nes. ""
+$               then
+$                   diff :== $'old_diff'
+$               else
+$                   no_gnv = 1
+$               endif
+$           endif
+$       endif
+$   endif
+$!
+$if no_gnv
+$then
+$   write sys$output "Could not find an up to date GNV installed!"
+$   help_flag = 1
+$endif
+$!
+$! Find perl 5.18.1 or later.
+$!
+$! look in perl_root:[000000]perl_setup.com
+$ perl_root = f$trnlnm("perl_root")
+$ ! This works with known perl installed from PCSI kits.
+$ if perl_root .nes. ""
+$ then
+$   perl_ver = f$element(1, ".", perl_root)
+$   if f$locate("-", perl_ver) .lt. f$length(perl_ver)
+$   then
+$       no_perl = 0
+$   endif
+$ endif
+$ if no_perl
+$ then
+$!  look for sys$common:[perl-*]perl_setup.com
+$   perl_setup = f$search("sys$common:[perl-*]perl_setup.com")
+$   if perl_setup .eqs. ""
+$   then
+$       if gnv_root .nes. ""
+$       then
+$           gnv_device = f$parse(gnv_root,,,"DEVICE")
+$           perl_templ = "[vms$common.perl-*]perl_setup.com"
+$           perl_search = f$parse(perl_templ, gnv_device)
+$           perl_setup = f$search(perl_search)
+$       endif
+$   endif
+$   if perl_setup .nes. ""
+$   then
+$       @'perl_setup'
+$       no_perl = 0
+$   endif
+$ endif
+$!
+$ if no_perl
+$ then
+$   write sys$output "Could not find an up to date Perl installed!"
+$   help_flag = "-help"
+$ endif
+$!
+$!
+$ if help_flag .nes. ""
+$ then
+$   type sys$input
+$DECK
+This is a test script wrapper for the run_make_tests.pl script.
+
+This wrapper makes sure that the DCL symbols and logical names needed to
+run the perl script are in place.
+
+The test wrapper currently requires that the DCL symbols be global symbols.
+Those symbols will be left behind after the procedure is run.
+
+The PERL_ROOT will be set to a compatible perl if such a perl is found and
+is not the default PERL_ROOT:.  This setting will persist after the test.
+
+This wrapper should be run with the default set to the base directory
+of the make source.
+
+The HELP parameter will bring up this text and then run the help script
+for the Perl wrapper.  Not all options for the perl script have been
+implemented, such as valgrind or specifying the make path or source path.
+
+Running the wrapper script requires:
+  Perl 5.18 or later.
+  PCSI kits available from http://sourceforge.net/projects/vmsperlkit/files/
+
+  GNV 2.1.3 or later.  GNV 3.0.1 has not tested with this script.
+  Bash 4.2.47 or later.
+  Coreutils 8.21 or later.
+  http://sourceforge.net/projects/gnv/files/
+  Read before installing:
+     http://sourceforge.net/p/gnv/wiki/InstallingGNVPackages/
+  As updates for other GNV components get posted, those updates should
+  be used.
+
+$EOD
+$ endif
+$!
+$ if no_gnv .or. no_perl then exit 44
+$!
+$!
+$ make := $bin:make.exe
+$ default = f$environment("DEFAULT")
+$ this = f$environment("PROCEDURE")
+$ on error then goto all_error
+$ set default 'f$parse(this,,,"DEVICE")''f$parse(this,,,"DIRECTORY")'
+$!
+$! Need to make sure that the config-flags.pm exists.
+$ if f$search("config-flags.pm") .eqs. ""
+$ then
+$   @config_flags_pm.com
+$ endif
+$ define/user bin 'default',gnv$gnu:[bin]
+$ define/user decc$filename_unix_noversion enable
+$ define/user decc$filename_unix_report enable
+$ define/user decc$readdir_dropdotnotype enable
+$ flags = ""
+$ if verbose_flag .nes. "" then flags = verbose_flag
+$ if detail_flag .nes. "" then flags = flags + " " + detail_flag
+$ if keep_flag .nes. "" then flags = flags + " " + keep_flag
+$ if usage_flag .nes. "" then flags = flags + " " + usage_flag
+$ if help_flag .nes. "" then flags = flags + " " + help_flag
+$ if debug_flag .nes. "" then flags = flags + " " + debug_flag
+$ flags = f$edit(flags, "TRIM, COMPRESS")
+$ if testname .nes. ""
+$ then
+$   perl run_make_tests.pl "''testname'" 'flags'
+$ else
+$   perl run_make_tests.pl 'flags'
+$ endif
+$all_error:
+$ set default 'default'
+$!
diff --git a/tests/run_make_tests.pl b/tests/run_make_tests.pl
new file mode 100644
index 0000000..9468fab
--- /dev/null
+++ b/tests/run_make_tests.pl
@@ -0,0 +1,491 @@
+#!/usr/bin/env perl
+# -*-perl-*-
+
+# Test driver for the Make test suite
+
+# Usage:  run_make_tests  [testname]
+#                         [-debug]
+#                         [-help]
+#                         [-verbose]
+#                         [-keep]
+#                         [-make <make prog>]
+#                        (and others)
+
+# Copyright (C) 1992-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+%FEATURES = ();
+
+$valgrind = 0;              # invoke make with valgrind
+$valgrind_args = '';
+$memcheck_args = '--num-callers=15 --tool=memcheck --leak-check=full --suppressions=guile.supp';
+$massif_args = '--num-callers=15 --tool=massif --alloc-fn=xmalloc --alloc-fn=xcalloc --alloc-fn=xrealloc --alloc-fn=xstrdup --alloc-fn=xstrndup';
+$pure_log = undef;
+
+# The location of the GNU make source directory
+$srcdir = '';
+
+$command_string = '';
+
+$all_tests = 0;
+
+# rmdir broken in some Perls on VMS.
+if ($^O eq 'VMS')
+{
+  require VMS::Filespec;
+  VMS::Filespec->import();
+
+  sub vms_rmdir {
+    my $vms_file = vmspath($_[0]);
+    $vms_file = fileify($vms_file);
+    my $ret = unlink(vmsify($vms_file));
+    return $ret
+  };
+
+  *CORE::GLOBAL::rmdir = \&vms_rmdir;
+}
+
+require "test_driver.pl";
+require "config-flags.pm";
+
+# Some target systems might not have the POSIX module...
+$has_POSIX = eval { require "POSIX.pm" };
+
+#$SIG{INT} = sub { print STDERR "Caught a signal!\n"; die @_; };
+
+sub valid_option
+{
+   local($option) = @_;
+
+   if ($option =~ /^-make([-_]?path)?$/i) {
+       $make_path = shift @argv;
+       if (!-f $make_path) {
+           print "$option $make_path: Not found.\n";
+           exit 0;
+       }
+       return 1;
+   }
+
+   if ($option =~ /^-srcdir$/i) {
+       $srcdir = shift @argv;
+       if (! -f "$srcdir/gnumake.h") {
+           print "$option $srcdir: Not a valid GNU make source directory.\n";
+           exit 0;
+       }
+       return 1;
+   }
+
+   if ($option =~ /^-all([-_]?tests)?$/i) {
+       $all_tests = 1;
+       return 1;
+   }
+
+   if ($option =~ /^-(valgrind|memcheck)$/i) {
+       $valgrind = 1;
+       $valgrind_args = $memcheck_args;
+       return 1;
+   }
+
+   if ($option =~ /^-massif$/i) {
+       $valgrind = 1;
+       $valgrind_args = $massif_args;
+       return 1;
+   }
+
+# This doesn't work--it _should_!  Someone badly needs to fix this.
+#
+#   elsif ($option =~ /^-work([-_]?dir)?$/)
+#   {
+#      $workdir = shift @argv;
+#      return 1;
+#   }
+
+   return 0;
+}
+
+
+# This is an "all-in-one" function.  Arguments are as follows:
+#
+#  [0] (string):  The makefile to be tested.  undef means use the last one.
+#  [1] (string):  Arguments to pass to make.
+#  [2] (string):  Answer we should get back.
+#  [3] (integer): Exit code we expect.  A missing code means 0 (success)
+
+$old_makefile = undef;
+
+sub subst_make_string
+{
+    local $_ = shift;
+    $makefile and s/#MAKEFILE#/$makefile/g;
+    s/#MAKEPATH#/$mkpath/g;
+    s/#MAKE#/$make_name/g;
+    s/#PERL#/$perl_name/g;
+    s/#PWD#/$pwd/g;
+    return $_;
+}
+
+sub run_make_test
+{
+  local ($makestring, $options, $answer, $err_code, $timeout) = @_;
+
+  # If the user specified a makefile string, create a new makefile to contain
+  # it.  If the first value is not defined, use the last one (if there is
+  # one).
+
+  if (! defined $makestring) {
+    defined $old_makefile
+      || die "run_make_test(undef) invoked before run_make_test('...')\n";
+    $makefile = $old_makefile;
+  } else {
+    if (! defined($makefile)) {
+      $makefile = &get_tmpfile();
+    }
+
+    # Make sure it ends in a newline and substitute any special tokens.
+    $makestring && $makestring !~ /\n$/s and $makestring .= "\n";
+    $makestring = subst_make_string($makestring);
+
+    # Populate the makefile!
+    open(MAKEFILE, "> $makefile") || die "Failed to open $makefile: $!\n";
+    print MAKEFILE $makestring;
+    close(MAKEFILE) || die "Failed to write $makefile: $!\n";
+  }
+
+  # Do the same processing on $answer as we did on $makestring.
+  if (defined $answer) {
+      $answer && $answer !~ /\n$/s and $answer .= "\n";
+      $answer = subst_make_string($answer);
+  }
+
+  run_make_with_options($makefile, $options, &get_logfile(0),
+                        $err_code, $timeout);
+  &compare_output($answer, &get_logfile(1));
+
+  $old_makefile = $makefile;
+  $makefile = undef;
+}
+
+# The old-fashioned way...
+sub run_make_with_options {
+  local ($filename,$options,$logname,$expected_code,$timeout) = @_;
+  local($code);
+  local($command) = $make_path;
+
+  $expected_code = 0 unless defined($expected_code);
+
+  # Reset to reflect this one test.
+  $test_passed = 1;
+
+  if ($filename) {
+    $command .= " -f $filename";
+  }
+
+  if ($options) {
+    if ($^O eq 'VMS') {
+      # Try to make sure arguments are properly quoted.
+      # This does not handle all cases.
+
+      # VMS uses double quotes instead of single quotes.
+      $options =~ s/\'/\"/g;
+
+      # If the leading quote is inside non-whitespace, then the
+      # quote must be doubled, because it will be enclosed in another
+      # set of quotes.
+      $options =~ s/(\S)(\".*\")/$1\"$2\"/g;
+
+      # Options must be quoted to preserve case if not already quoted.
+      $options =~ s/(\S+)/\"$1\"/g;
+
+      # Special fixup for embedded quotes.
+      $options =~ s/(\"\".+)\"(\s+)\"(.+\"\")/$1$2$3/g;
+
+      $options =~ s/(\A)(?:\"\")(.+)(?:\"\")/$1\"$2\"/g;
+
+      # Special fixup for misc/general4 test.
+      $options =~ s/""\@echo" "cc""/\@echo cc"/;
+      $options =~ s/"\@echo link"""/\@echo link"/;
+
+      # Remove shell escapes expected to be removed by bash
+      if ($options !~ /path=pre/) {
+        $options =~ s/\\//g;
+      }
+
+      # special fixup for options/eval
+      $options =~ s/"--eval=\$\(info" "eval/"--eval=\$\(info eval/;
+
+      print ("Options fixup = -$options-\n") if $debug;
+    }
+    $command .= " $options";
+  }
+
+  $command_string = "$command\n";
+
+  if ($valgrind) {
+    print VALGRIND "\n\nExecuting: $command\n";
+  }
+
+
+  {
+      my $old_timeout = $test_timeout;
+      $timeout and $test_timeout = $timeout;
+
+      # If valgrind is enabled, turn off the timeout check
+      $valgrind and $test_timeout = 0;
+
+      $code = &run_command_with_output($logname,$command);
+      $test_timeout = $old_timeout;
+  }
+
+  # Check to see if we have Purify errors.  If so, keep the logfile.
+  # For this to work you need to build with the Purify flag -exit-status=yes
+
+  if ($pure_log && -f $pure_log) {
+    if ($code & 0x7000) {
+      $code &= ~0x7000;
+
+      # If we have a purify log, save it
+      $tn = $pure_testname . ($num_of_logfiles ? ".$num_of_logfiles" : "");
+      print("Renaming purify log file to $tn\n") if $debug;
+      rename($pure_log, "$tn")
+        || die "Can't rename $log to $tn: $!\n";
+      ++$purify_errors;
+    } else {
+      unlink($pure_log);
+    }
+  }
+
+  if ($code != $expected_code) {
+    print "Error running $make_path (expected $expected_code; got $code): $command\n";
+    $test_passed = 0;
+    $runf = &get_runfile;
+    &create_file (&get_runfile, $command_string);
+    # If it's a SIGINT, stop here
+    if ($code & 127) {
+      print STDERR "\nCaught signal ".($code & 127)."!\n";
+      ($code & 127) == 2 and exit($code);
+    }
+    return 0;
+  }
+
+  if ($profile & $vos) {
+    system "add_profile $make_path";
+  }
+
+  return 1;
+}
+
+sub print_usage
+{
+   &print_standard_usage ("run_make_tests",
+                          "[-make MAKE_PATHNAME] [-srcdir SRCDIR] [-memcheck] [-massif]",);
+}
+
+sub print_help
+{
+   &print_standard_help (
+        "-make",
+        "\tYou may specify the pathname of the copy of make to run.",
+        "-srcdir",
+        "\tSpecify the make source directory.",
+        "-valgrind",
+        "-memcheck",
+        "\tRun the test suite under valgrind's memcheck tool.",
+        "\tChange the default valgrind args with the VALGRIND_ARGS env var.",
+        "-massif",
+        "\tRun the test suite under valgrind's massif toool.",
+        "\tChange the default valgrind args with the VALGRIND_ARGS env var."
+       );
+}
+
+sub get_this_pwd {
+  $delete_command = 'rm -f';
+  if ($has_POSIX) {
+    $__pwd = POSIX::getcwd();
+  } elsif ($vos) {
+    $delete_command = "delete_file -no_ask";
+    $__pwd = `++(current_dir)`;
+  } else {
+    # No idea... just try using pwd as a last resort.
+    chop ($__pwd = `pwd`);
+  }
+
+  return $__pwd;
+}
+
+sub set_defaults
+{
+   # $profile = 1;
+   $testee = "GNU make";
+   $make_path = "make";
+   $tmpfilesuffix = "mk";
+   $pwd = &get_this_pwd;
+}
+
+sub set_more_defaults
+{
+   local($string);
+   local($index);
+
+   # find the type of the port.  We do this up front to have a single
+   # point of change if it needs to be tweaked.
+   #
+   # This is probably not specific enough.
+   #
+   if ($osname =~ /Windows/i || $osname =~ /MINGW32/i || $osname =~ /CYGWIN_NT/i) {
+     $port_type = 'W32';
+   }
+   # Bleah, the osname is so variable on DOS.  This kind of bites.
+   # Well, as far as I can tell if we check for some text at the
+   # beginning of the line with either no spaces or a single space, then
+   # a D, then either "OS", "os", or "ev" and a space.  That should
+   # match and be pretty specific.
+   elsif ($osname =~ /^([^ ]*|[^ ]* [^ ]*)D(OS|os|ev) /) {
+     $port_type = 'DOS';
+   }
+   # Check for OS/2
+   elsif ($osname =~ m%OS/2%) {
+     $port_type = 'OS/2';
+   }
+   # Everything else, right now, is UNIX.  Note that we should integrate
+   # the VOS support into this as well and get rid of $vos; we'll do
+   # that next time.
+   else {
+     $port_type = 'UNIX';
+   }
+
+   # On DOS/Windows system the filesystem apparently can't track
+   # timestamps with second granularity (!!).  Change the sleep time
+   # needed to force a file to be considered "old".
+   $wtime = $port_type eq 'UNIX' ? 1 : $port_type eq 'OS/2' ? 2 : 4;
+
+   print "Port type: $port_type\n" if $debug;
+   print "Make path: $make_path\n" if $debug;
+
+   # Find the full pathname of Make.  For DOS systems this is more
+   # complicated, so we ask make itself.
+   if ($osname eq 'VMS') {
+     # On VMS pre-setup make to be found with simply 'make'.
+     $make_path = 'make';
+   } else {
+     my $mk = `sh -c 'echo "all:;\@echo \\\$(MAKE)" | $make_path -f-'`;
+     chop $mk;
+     $mk or die "FATAL ERROR: Cannot determine the value of \$(MAKE):\n
+'echo \"all:;\@echo \\\$(MAKE)\" | $make_path -f-' failed!\n";
+     $make_path = $mk;
+   }
+   print "Make\t= '$make_path'\n" if $debug;
+
+   my $redir2 = '2> /dev/null';
+   $redir2 = '' if os_name eq 'VMS';
+   $string = `$make_path -v -f /dev/null $redir2`;
+
+   $string =~ /^(GNU Make [^,\n]*)/;
+   $testee_version = "$1\n";
+
+   my $redir = '2>&1';
+   $redir = '' if os_name eq 'VMS';
+   $string = `sh -c "$make_path -f /dev/null $redir"`;
+   if ($string =~ /(.*): \*\*\* No targets\.  Stop\./) {
+     $make_name = $1;
+   }
+   else {
+     $make_path =~ /^(?:.*$pathsep)?(.+)$/;
+     $make_name = $1;
+   }
+
+   # prepend pwd if this is a relative path (ie, does not
+   # start with a slash, but contains one).  Thanks for the
+   # clue, Roland.
+
+   if (index ($make_path, ":") != 1 && index ($make_path, "/") > 0)
+   {
+      $mkpath = "$pwd$pathsep$make_path";
+   }
+   else
+   {
+      $mkpath = $make_path;
+   }
+
+   # If srcdir wasn't provided on the command line, see if the
+   # location of the make program gives us a clue.  Don't fail if not;
+   # we'll assume it's been installed into /usr/include or wherever.
+   if (! $srcdir) {
+       $make_path =~ /^(.*$pathsep)?/;
+       my $d = $1 || '../';
+       -f "${d}gnumake.h" and $srcdir = $d;
+   }
+
+   # Not with the make program, so see if we can get it out of the makefile
+   if (! $srcdir && open(MF, "< ../Makefile")) {
+       local $/ = undef;
+       $_ = <MF>;
+       close(MF);
+       /^abs_srcdir\s*=\s*(.*?)\s*$/m;
+       -f "$1/gnumake.h" and $srcdir = $1;
+   }
+
+   # Get Purify log info--if any.
+
+   if (exists $ENV{PURIFYOPTIONS}
+       && $ENV{PURIFYOPTIONS} =~ /.*-logfile=([^ ]+)/) {
+     $pure_log = $1 || '';
+     $pure_log =~ s/%v/$make_name/;
+     $purify_errors = 0;
+   }
+
+   $string = `sh -c "$make_path -j 2 -f /dev/null $redir"`;
+   if ($string =~ /not supported/) {
+     $parallel_jobs = 0;
+   }
+   else {
+     $parallel_jobs = 1;
+   }
+
+   %FEATURES = map { $_ => 1 } split /\s+/, `sh -c "echo '\\\$(info \\\$(.FEATURES))' | $make_path -f- 2>/dev/null"`;
+
+   # Set up for valgrind, if requested.
+
+   if ($valgrind) {
+     my $args = $valgrind_args;
+     open(VALGRIND, "> valgrind.out")
+       || die "Cannot open valgrind.out: $!\n";
+     #  -q --leak-check=yes
+     exists $ENV{VALGRIND_ARGS} and $args = $ENV{VALGRIND_ARGS};
+     $make_path = "valgrind --log-fd=".fileno(VALGRIND)." $args $make_path";
+     # F_SETFD is 2
+     fcntl(VALGRIND, 2, 0) or die "fcntl(setfd) failed: $!\n";
+     system("echo Starting on `date` 1>&".fileno(VALGRIND));
+     print "Enabled valgrind support.\n";
+   }
+}
+
+sub setup_for_test
+{
+  $makefile = &get_tmpfile;
+  if (-f $makefile) {
+    unlink $makefile;
+  }
+
+  # Get rid of any Purify logs.
+  if ($pure_log) {
+    ($pure_testname = $testname) =~ tr,/,_,;
+    $pure_testname = "$pure_log.$pure_testname";
+    system("rm -f $pure_testname*");
+    print("Purify testfiles are: $pure_testname*\n") if $debug;
+  }
+}
+
+exit !&toplevel;
diff --git a/tests/scripts/features/archives b/tests/scripts/features/archives
new file mode 100644
index 0000000..b0acfec
--- /dev/null
+++ b/tests/scripts/features/archives
@@ -0,0 +1,97 @@
+#                                                              -*-mode: perl-*-
+
+$description = "Test GNU make's archive management features.";
+
+$details = "\
+This only works on systems that support it.";
+
+# If this instance of make doesn't support archives, skip it
+exists $FEATURES{archives} or return -1;
+
+# Create some .o files to work with
+utouch(-60, qw(a1.o a2.o a3.o));
+
+my $ar = $CONFIG_FLAGS{AR};
+
+# Some versions of ar print different things on creation.  Find out.
+my $created = `$ar rv libxx.a a1.o 2>&1`;
+
+# Some versions of ar print different things on add.  Find out.
+my $add = `$ar rv libxx.a a2.o 2>&1`;
+$add =~ s/a2\.o/#OBJECT#/g;
+
+# Some versions of ar print different things on replacement.  Find out.
+my $repl = `$ar rv libxx.a a2.o 2>&1`;
+$repl =~ s/a2\.o/#OBJECT#/g;
+
+unlink('libxx.a');
+
+# Very simple
+run_make_test('all: libxx.a(a1.o)',
+              '', "$ar rv libxx.a a1.o\n$created");
+
+# Multiple .o's.  Add a new one to the existing library
+($_ = $add) =~ s/#OBJECT#/a2.o/g;
+run_make_test('all: libxx.a(a1.o a2.o)',
+              '', "$ar rv libxx.a a2.o\n$_");
+
+# Touch one of the .o's so it's rebuilt
+utouch(-40, 'a1.o');
+($_ = $repl) =~ s/#OBJECT#/a1.o/g;
+run_make_test(undef, '', "$ar rv libxx.a a1.o\n$_");
+
+# Use wildcards
+run_make_test('all: libxx.a(*.o)',
+              '', "#MAKE#: Nothing to be done for 'all'.\n");
+
+# Touch one of the .o's so it's rebuilt
+utouch(-30, 'a1.o');
+($_ = $repl) =~ s/#OBJECT#/a1.o/g;
+run_make_test(undef, '', "$ar rv libxx.a a1.o\n$_");
+
+# Use both wildcards and simple names
+utouch(-50, 'a2.o');
+($_ = $add) =~ s/#OBJECT#/a3.o/g;
+$_ .= "$ar rv libxx.a a2.o\n";
+($_ .= $repl) =~ s/#OBJECT#/a2.o/g;
+run_make_test('all: libxx.a(a3.o *.o)', '',
+              "$ar rv libxx.a a3.o\n$_");
+
+# Check whitespace handling
+utouch(-40, 'a2.o');
+($_ = $repl) =~ s/#OBJECT#/a2.o/g;
+run_make_test('all: libxx.a(  a3.o    *.o     )', '',
+              "$ar rv libxx.a a2.o\n$_");
+
+rmfiles(qw(a1.o a2.o a3.o libxx.a));
+
+# Check non-archive targets
+# See Savannah bug #37878
+run_make_test(q!
+all: foo(bar).baz
+foo(bar).baz: ; @echo '$@'
+!,
+              '', "foo(bar).baz\n");
+
+# Check renaming of archive targets.
+# See Savannah bug #38442
+
+mkdir('artest', 0777);
+touch('foo.vhd');
+
+run_make_test(q!
+DIR = artest
+vpath % $(DIR)
+default: lib(foo)
+(%): %.vhd ; @cd $(DIR) && touch $(*F) && $(AR) $(ARFLAGS) $@ $(*F) >/dev/null 2>&1 && rm $(*F)
+.PHONY: default
+!,
+              '', "");
+
+run_make_test(undef, '', "#MAKE#: Nothing to be done for 'default'.\n");
+
+unlink('foo.vhd');
+remove_directory_tree('artest');
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/comments b/tests/scripts/features/comments
new file mode 100644
index 0000000..9257955
--- /dev/null
+++ b/tests/scripts/features/comments
@@ -0,0 +1,35 @@
+$description = "The following test creates a makefile to test comments\n"
+              ."and comment continuation to the next line using a \n"
+              ."backslash within makefiles.";
+
+$details = "To test comments within a makefile, a semi-colon was placed \n"
+          ."after a comment was started.  This should not be reported as\n"
+          ."an error since it is within a comment.  We then continue the \n"
+          ."comment to the next line using a backslash.  To test whether\n"
+          ."the comment really continued, we place an echo command with some\n"
+          ."text on the line which should never execute since it should be \n"
+          ."within a comment\n";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<\EOF;
+# Test comment vs semicolon parsing and line continuation
+target: # this ; is just a comment \
+	@echo This is within a comment. 
+	@echo There should be no errors for this makefile.
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "There should be no errors for this makefile.\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1))
diff --git a/tests/scripts/features/conditionals b/tests/scripts/features/conditionals
new file mode 100644
index 0000000..2ece60b
--- /dev/null
+++ b/tests/scripts/features/conditionals
@@ -0,0 +1,146 @@
+#                                                                    -*-perl-*-
+$description = "Check GNU make conditionals.";
+
+$details = "Attempt various different flavors of GNU make conditionals.";
+
+run_make_test('
+arg1 = first
+arg2 = second
+arg3 = third
+arg4 = cc
+arg5 = second
+
+all:
+ifeq ($(arg1),$(arg2))
+	@echo arg1 equals arg2
+else
+	@echo arg1 NOT equal arg2
+endif
+
+ifeq \'$(arg2)\' "$(arg5)"
+	@echo arg2 equals arg5
+else
+	@echo arg2 NOT equal arg5
+endif
+
+ifneq \'$(arg3)\' \'$(arg4)\'
+	@echo arg3 NOT equal arg4
+else
+	@echo arg3 equal arg4
+endif
+
+ifndef undefined
+	@echo variable is undefined
+else
+	@echo variable undefined is defined
+endif
+ifdef arg4
+	@echo arg4 is defined
+else
+	@echo arg4 is NOT defined
+endif',
+              '',
+              'arg1 NOT equal arg2
+arg2 equals arg5
+arg3 NOT equal arg4
+variable is undefined
+arg4 is defined');
+
+
+# Test expansion of variables inside ifdef.
+
+run_make_test('
+foo = 1
+
+FOO = foo
+F = f
+
+DEF = no
+DEF2 = no
+
+ifdef $(FOO)
+DEF = yes
+endif
+
+ifdef $(F)oo
+DEF2 = yes
+endif
+
+
+DEF3 = no
+FUNC = $1
+ifdef $(call FUNC,DEF)3
+  DEF3 = yes
+endif
+
+all:; @echo DEF=$(DEF) DEF2=$(DEF2) DEF3=$(DEF3)',
+              '',
+              'DEF=yes DEF2=yes DEF3=yes');
+
+
+# Test all the different "else if..." constructs
+
+run_make_test('
+arg1 = first
+arg2 = second
+arg3 = third
+arg4 = cc
+arg5 = fifth
+
+result =
+
+ifeq ($(arg1),$(arg2))
+  result += arg1 equals arg2
+else ifeq \'$(arg2)\' "$(arg5)"
+  result += arg2 equals arg5
+else ifneq \'$(arg3)\' \'$(arg3)\'
+  result += arg3 NOT equal arg4
+else ifndef arg5
+  result += variable is undefined
+else ifdef undefined
+  result += arg4 is defined
+else
+  result += success
+endif
+
+
+all: ; @echo $(result)',
+              '',
+              'success');
+
+
+# Test some random "else if..." construct nesting
+
+run_make_test('
+arg1 = first
+arg2 = second
+arg3 = third
+arg4 = cc
+arg5 = second
+
+ifeq ($(arg1),$(arg2))
+  $(info failed 1)
+else ifeq \'$(arg2)\' "$(arg2)"
+  ifdef undefined
+    $(info failed 2)
+  else
+    $(info success)
+  endif
+else ifneq \'$(arg3)\' \'$(arg3)\'
+  $(info failed 3)
+else ifdef arg5
+  $(info failed 4)
+else ifdef undefined
+  $(info failed 5)
+else
+  $(info failed 6)
+endif
+
+.PHONY: all
+all: ; @:',
+              '',
+              'success');
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/default_names b/tests/scripts/features/default_names
new file mode 100644
index 0000000..2e83880
--- /dev/null
+++ b/tests/scripts/features/default_names
@@ -0,0 +1,44 @@
+#                                                                    -*-perl-*-
+
+$description = "This script tests to make sure that Make looks for
+default makefiles in the correct order (GNUmakefile,makefile,Makefile)";
+
+# Create a makefile called "GNUmakefile"
+$makefile = "GNUmakefile";
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE "FIRST: ; \@echo It chose GNUmakefile\n";
+close(MAKEFILE);
+
+# Create another makefile called "makefile"
+open(MAKEFILE,"> makefile");
+print MAKEFILE "SECOND: ; \@echo It chose makefile\n";
+close(MAKEFILE);
+
+# DOS/WIN32/MacOSX platforms are case-insensitive / case-preserving, so
+# Makefile is the same file as makefile.  Just test what we can here.
+
+my $case_sensitive = 0;
+if (! -f 'Makefile') {
+    # Create another makefile called "Makefile"
+    $case_sensitive = 1;
+    open(MAKEFILE,"> Makefile");
+    print MAKEFILE "THIRD: ; \@echo It chose Makefile\n";
+    close(MAKEFILE);
+}
+
+run_make_with_options("","",&get_logfile);
+compare_output("It chose GNUmakefile\n",&get_logfile(1));
+unlink($makefile);
+
+run_make_with_options("","",&get_logfile);
+compare_output("It chose makefile\n",&get_logfile(1));
+unlink("makefile");
+
+if ($case_sensitive) {
+    run_make_with_options("","",&get_logfile);
+    compare_output("It chose Makefile\n",&get_logfile(1));
+    unlink("Makefile");
+}
+
+1;
diff --git a/tests/scripts/features/double_colon b/tests/scripts/features/double_colon
new file mode 100644
index 0000000..1097775
--- /dev/null
+++ b/tests/scripts/features/double_colon
@@ -0,0 +1,164 @@
+#                                                                    -*-perl-*-
+$description = "Test handling of double-colon rules.";
+
+$details = "\
+We test these features:
+
+  - Multiple commands for the same (double-colon) target
+  - Different prerequisites for targets: only out-of-date
+    ones are rebuilt.
+  - Double-colon targets that aren't the goal target.
+
+Then we do the same thing for parallel builds: double-colon
+targets should always be built serially.";
+
+# The Contents of the MAKEFILE ...
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+
+all: baz
+
+foo:: f1.h ; @echo foo FIRST
+foo:: f2.h ; @echo foo SECOND
+
+bar:: ; @echo aaa; sleep 1; echo aaa done
+bar:: ; @echo bbb
+
+baz:: ; @echo aaa
+baz:: ; @echo bbb
+
+biz:: ; @echo aaa
+biz:: two ; @echo bbb
+
+two: ; @echo two
+
+f1.h f2.h: ; @echo $@
+
+d :: ; @echo ok
+d :: d ; @echo oops
+
+EOF
+
+close(MAKEFILE);
+
+# TEST 0: A simple double-colon rule that isn't the goal target.
+
+&run_make_with_options($makefile, "all", &get_logfile, 0);
+$answer = "aaa\nbbb\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 1: As above, in parallel
+
+if ($parallel_jobs) {
+  &run_make_with_options($makefile, "-j10 all", &get_logfile, 0);
+  $answer = "aaa\nbbb\n";
+  &compare_output($answer, &get_logfile(1));
+}
+
+# TEST 2: A simple double-colon rule that is the goal target
+
+&run_make_with_options($makefile, "bar", &get_logfile, 0);
+$answer = "aaa\naaa done\nbbb\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 3: As above, in parallel
+
+if ($parallel_jobs) {
+  &run_make_with_options($makefile, "-j10 bar", &get_logfile, 0);
+  $answer = "aaa\naaa done\nbbb\n";
+  &compare_output($answer, &get_logfile(1));
+}
+
+# TEST 4: Each double-colon rule is supposed to be run individually
+
+&utouch(-5, 'f2.h');
+&touch('foo');
+
+&run_make_with_options($makefile, "foo", &get_logfile, 0);
+$answer = "f1.h\nfoo FIRST\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 5: Again, in parallel.
+
+if ($parallel_jobs) {
+  &run_make_with_options($makefile, "-j10 foo", &get_logfile, 0);
+  $answer = "f1.h\nfoo FIRST\n";
+  &compare_output($answer, &get_logfile(1));
+}
+
+# TEST 6: Each double-colon rule is supposed to be run individually
+
+&utouch(-5, 'f1.h');
+unlink('f2.h');
+&touch('foo');
+
+&run_make_with_options($makefile, "foo", &get_logfile, 0);
+$answer = "f2.h\nfoo SECOND\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 7: Again, in parallel.
+
+if ($parallel_jobs) {
+  &run_make_with_options($makefile, "-j10 foo", &get_logfile, 0);
+  $answer = "f2.h\nfoo SECOND\n";
+  &compare_output($answer, &get_logfile(1));
+}
+
+# TEST 8: Test circular dependency check; PR/1671
+
+&run_make_with_options($makefile, "d", &get_logfile, 0);
+$answer = "ok\n$make_name: Circular d <- d dependency dropped.\noops\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 8: I don't grok why this is different than the above, but it is...
+#
+# Hmm... further testing indicates this might be timing-dependent?
+#
+#if ($parallel_jobs) {
+#  &run_make_with_options($makefile, "-j10 biz", &get_logfile, 0);
+#  $answer = "aaa\ntwo\nbbb\n";
+#  &compare_output($answer, &get_logfile(1));
+#}
+
+unlink('foo','f1.h','f2.h');
+
+
+# TEST 9: make sure all rules in s double colon family get executed
+#         (Savannah bug #14334).
+#
+
+&touch('one');
+&touch('two');
+
+run_make_test('
+.PHONY: all
+all: result
+
+result:: one
+	@echo $^ >>$@
+	@echo $^
+
+result:: two
+	@echo $^ >>$@
+	@echo $^
+
+',
+'',
+'one
+two');
+
+unlink('result','one','two');
+
+# TEST 10: check for proper backslash handling
+#          Savannah bug #33399
+
+run_make_test('
+a\ xb :: ; @echo one
+a\ xb :: ; @echo two
+',
+              '', "one\ntwo\n");
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/echoing b/tests/scripts/features/echoing
new file mode 100644
index 0000000..40debf5
--- /dev/null
+++ b/tests/scripts/features/echoing
@@ -0,0 +1,64 @@
+#                                                                    -*-perl-*-
+$description = "The following test creates a makefile to test command
+echoing.  It tests that when a command line starts with
+a '\@', the echoing of that line is suppressed.  It also
+tests the -n option which tells make to ONLY echo the
+commands and no execution happens.  In this case, even
+the commands with '\@' are printed. Lastly, it tests the
+-s flag which tells make to prevent all echoing, as if
+all commands started with a '\@'.";
+
+$details = "This test is similar to the 'clean' test except that a '\@' has
+been placed in front of the delete command line.  Four tests
+are run here.  First, make is run normally and the first echo
+command should be executed.  In this case there is no '\@' so
+we should expect make to display the command AND display the
+echoed message.  Secondly, make is run with the clean target,
+but since there is a '\@' at the beginning of the command, we
+expect no output; just the deletion of a file which we check
+for.  Third, we give the clean target again except this time
+we give make the -n option.  We now expect the command to be
+displayed but not to be executed.  In this case we need only
+to check the output since an error message would be displayed
+if it actually tried to run the delete command again and the
+file didn't exist. Lastly, we run the first test again with
+the -s option and check that make did not echo the echo
+command before printing the message.\n";
+
+$example = "EXAMPLE_FILE";
+
+touch($example);
+
+# TEST #1
+# -------
+
+run_make_test("
+all:
+\techo This makefile did not clean the dir... good
+clean:
+\t\@$delete_command $example\n",
+              '', 'echo This makefile did not clean the dir... good
+This makefile did not clean the dir... good');
+
+# TEST #2
+# -------
+
+run_make_test(undef, 'clean', '');
+if (-f $example) {
+  $test_passed = 0;
+  unlink($example);
+}
+
+# TEST #3
+# -------
+
+run_make_test(undef, '-n clean', "$delete_command $example\n");
+
+
+# TEST #4
+# -------
+
+run_make_test(undef, '-s', "This makefile did not clean the dir... good\n");
+
+
+1;
diff --git a/tests/scripts/features/errors b/tests/scripts/features/errors
new file mode 100644
index 0000000..c0339cb
--- /dev/null
+++ b/tests/scripts/features/errors
@@ -0,0 +1,95 @@
+#                                                                    -*-perl-*-
+
+$description = "The following tests the -i option and the '-' in front of \n"
+              ."commands to test that make ignores errors in these commands\n"
+              ."and continues processing.";
+
+$details = "This test runs two makes.  The first runs on a target with a \n"
+          ."command that has a '-' in front of it (and a command that is \n"
+          ."intended to fail) and then a delete command after that is \n"
+          ."intended to succeed.  If make ignores the failure of the first\n"
+          ."command as it is supposed to, then the second command should \n"
+          ."delete a file and this is what we check for.  The second make\n"
+          ."that is run in this test is identical except that the make \n"
+          ."command is given with the -i option instead of the '-' in \n"
+          ."front of the command.  They should run the same. ";
+
+if ($vos)
+{
+   $rm_command = "delete_file";
+}
+else
+{
+   $rm_command = "rm";
+}
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "clean:\n"
+              ."\t-$rm_command cleanit\n"
+              ."\t$rm_command foo\n"
+	      ."clean2: \n"
+              ."\t$rm_command cleanit\n"
+              ."\t$rm_command foo\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch("foo");
+
+unlink("cleanit");
+$cleanit_error = `sh -c "$rm_command cleanit 2>&1"`;
+chomp $cleanit_error;
+$delete_error_code = $? >> 8;
+
+# TEST #1
+# -------
+
+$answer = "$rm_command cleanit
+$cleanit_error
+$makefile:2: recipe for target 'clean' failed
+$make_name: [clean] Error $delete_error_code (ignored)
+$rm_command foo\n";
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# If make acted as planned, it should ignore the error from the first
+# command in the target and execute the second which deletes the file "foo"
+# This file, therefore, should not exist if the test PASSES.
+if (-f "foo") {
+  $test_passed = 0;
+}
+
+# The output for this on VOS is too hard to replicate, so we only check it
+# on unix.
+if (!$vos)
+{
+   &compare_output($answer,&get_logfile(1));
+}
+
+
+&touch("foo");
+
+# TEST #2
+# -------
+
+$answer = "$rm_command cleanit
+$cleanit_error
+$makefile:5: recipe for target 'clean2' failed
+$make_name: [clean2] Error $delete_error_code (ignored)
+$rm_command foo\n";
+
+&run_make_with_options($makefile,"clean2 -i",&get_logfile);
+
+if (-f "foo") {
+  $test_passed = 0;
+}
+
+if (!$vos) {
+   &compare_output($answer,&get_logfile(1));
+}
+
+1;
diff --git a/tests/scripts/features/escape b/tests/scripts/features/escape
new file mode 100644
index 0000000..bf069df
--- /dev/null
+++ b/tests/scripts/features/escape
@@ -0,0 +1,74 @@
+#                                                                    -*-perl-*-
+$description = "Test various types of escaping in makefiles.";
+
+$details = "\
+Make sure that escaping of ':' works in target names.
+Make sure escaping of whitespace works in target names.
+Make sure that escaping of '#' works.
+Make sure that backslash before non-special characters are kept.";
+
+
+# TEST 1
+
+run_make_test('
+$(path)foo : ; @echo "touch ($@)"
+
+foo\ bar: ; @echo "touch ($@)"
+
+sharp: foo\#bar.ext
+foo\#bar.ext: ; @echo "foo#bar.ext = ($@)"',
+	      '',
+	      'touch (foo)');
+
+# TEST 2: This one should fail, since the ":" is unquoted.
+
+run_make_test(undef,
+	      'path=pre:',
+	      "#MAKEFILE#:2: *** target pattern contains no '%'.  Stop.",
+	      512);
+
+# TEST 3: This one should work, since we escape the ":".
+
+run_make_test(undef,
+	      "'path=pre\\:'",
+	      'touch (pre:foo)');
+
+# TEST 4: This one should fail, since the escape char is escaped.
+
+run_make_test(undef,
+	      "'path=pre\\\\:'",
+	      "#MAKEFILE#:2: *** target pattern contains no '%'.  Stop.",
+	      512);
+
+# TEST 5: This one should work
+
+run_make_test(undef,
+	      "'foo bar'",
+	      'touch (foo bar)');
+
+# TEST 6: Test escaped comments
+
+run_make_test(undef,
+	      'sharp',
+	      'foo#bar.ext = (foo#bar.ext)');
+
+# Test escaped colons in prerequisites
+# Quoting of backslashes in q!! is kind of messy.
+# Solaris sh does not properly handle backslashes even in '' so just
+# check the output make prints, not what the shell interprets.
+run_make_test(q!
+foo: foo\\:bar foo\\\\\\:bar foo\\\\\\\\\\:bar
+foo foo\\:bar foo\\\\\\:bar foo\\\\\\\\\\:bar: ; : '$@'
+!,
+              '', ": 'foo:bar'\n: 'foo\\:bar'\n: 'foo\\\\:bar'\n: 'foo'\n");
+
+# Test backslash before non-special chars: should be kept as-is
+
+run_make_test(q!
+all: ..\foo
+.DEFAULT: ; : '$@'
+!,
+              '', ": '..\\foo'\n");
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/export b/tests/scripts/features/export
new file mode 100644
index 0000000..81bff0c
--- /dev/null
+++ b/tests/scripts/features/export
@@ -0,0 +1,186 @@
+#                                                                    -*-perl-*-
+$description = "Check GNU make export/unexport commands.";
+
+$details = "";
+
+# The test driver cleans out our environment for us so we don't have to worry
+# about that here.
+
+&run_make_test('
+FOO = foo
+BAR = bar
+BOZ = boz
+
+export BAZ = baz
+export BOZ
+
+BITZ = bitz
+BOTZ = botz
+
+export BITZ BOTZ
+unexport BOTZ
+
+ifdef EXPORT_ALL
+export
+endif
+
+ifdef UNEXPORT_ALL
+unexport
+endif
+
+ifdef EXPORT_ALL_PSEUDO
+.EXPORT_ALL_VARIABLES:
+endif
+
+all:
+	@echo "FOO=$(FOO) BAR=$(BAR) BAZ=$(BAZ) BOZ=$(BOZ) BITZ=$(BITZ) BOTZ=$(BOTZ)"
+	@echo "FOO=$$FOO BAR=$$BAR BAZ=$$BAZ BOZ=$$BOZ BITZ=$$BITZ BOTZ=$$BOTZ"
+',
+           '', "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO= BAR= BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 1: make sure vars inherited from the parent are exported
+
+$extraENV{FOO} = 1;
+
+&run_make_test(undef, '', "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO=foo BAR= BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 2: global export.  Explicit unexport takes precedence.
+
+run_make_test(undef, "EXPORT_ALL=1" ,
+              "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 3: global unexport.  Explicit export takes precedence.
+
+&run_make_test(undef, "UNEXPORT_ALL=1",
+               "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO= BAR= BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 4: both: in the above makefile the unexport comes last so that rules.
+
+&run_make_test(undef, "EXPORT_ALL=1 UNEXPORT_ALL=1",
+               "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO= BAR= BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 5: test the pseudo target.
+
+&run_make_test(undef, "EXPORT_ALL_PSEUDO=1",
+               "FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=botz
+FOO=foo BAR=bar BAZ=baz BOZ=boz BITZ=bitz BOTZ=\n");
+
+# TEST 6: Test the expansion of variables inside export
+
+&run_make_test('
+foo = f-ok
+bar = b-ok
+
+FOO = foo
+F = f
+
+BAR = bar
+B = b
+
+export $(FOO)
+export $(B)ar
+
+all:
+	@echo foo=$(foo) bar=$(bar)
+	@echo foo=$$foo bar=$$bar
+',
+             "", "foo=f-ok bar=b-ok\nfoo=f-ok bar=b-ok\n");
+
+# TEST 7: Test the expansion of variables inside unexport
+
+&run_make_test('
+foo = f-ok
+bar = b-ok
+
+FOO = foo
+F = f
+
+BAR = bar
+B = b
+
+export foo bar
+
+unexport $(FOO)
+unexport $(B)ar
+
+all:
+	@echo foo=$(foo) bar=$(bar)
+	@echo foo=$$foo bar=$$bar
+',
+              '', "foo=f-ok bar=b-ok\nfoo= bar=\n");
+
+# TEST 7: Test exporting multiple variables on the same line
+
+&run_make_test('
+A = a
+B = b
+C = c
+D = d
+E = e
+F = f
+G = g
+H = h
+I = i
+J = j
+
+SOME = A B C
+
+export F G H I J
+
+export D E $(SOME)
+
+all: ; @echo A=$$A B=$$B C=$$C D=$$D E=$$E F=$$F G=$$G H=$$H I=$$I J=$$J
+',
+               '', "A=a B=b C=c D=d E=e F=f G=g H=h I=i J=j\n");
+
+# TEST 8: Test unexporting multiple variables on the same line
+
+@extraENV{qw(A B C D E F G H I J)} = qw(1 2 3 4 5 6 7 8 9 10);
+
+&run_make_test('
+A = a
+B = b
+C = c
+D = d
+E = e
+F = f
+G = g
+H = h
+I = i
+J = j
+
+SOME = A B C
+
+unexport F G H I J
+
+unexport D E $(SOME)
+
+all: ; @echo A=$$A B=$$B C=$$C D=$$D E=$$E F=$$F G=$$G H=$$H I=$$I J=$$J
+',
+               '', "A= B= C= D= E= F= G= H= I= J=\n");
+
+# TEST 9: Check setting a variable named "export"
+
+&run_make_test('
+export = 123
+export export
+export export = 456
+a: ; @echo "\$$(export)=$(export) / \$$export=$$export"
+',
+               '', "\$(export)=456 / \$export=456\n");
+
+# TEST 9: Check "export" as a target
+
+&run_make_test('
+a: export
+export: ; @echo "$@"
+',
+               '', "export\n");
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/include b/tests/scripts/features/include
new file mode 100644
index 0000000..ee014bd
--- /dev/null
+++ b/tests/scripts/features/include
@@ -0,0 +1,179 @@
+#                                     -*-mode: perl; rm-trailing-spaces: nil-*-
+
+$description = "Test various forms of the GNU make 'include' command.";
+
+$details = "\
+Test include, -include, sinclude and various regressions involving them.
+Test extra whitespace at the end of the include, multiple -includes and
+sincludes (should not give an error) and make sure that errors are reported
+for targets that were also -included.";
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+
+# The contents of the Makefile ...
+
+print MAKEFILE <<EOF;
+\#Extra space at the end of the following file name
+include $makefile2
+all: ; \@echo There should be no errors for this makefile.
+
+-include nonexistent.mk
+-include nonexistent.mk
+sinclude nonexistent.mk
+sinclude nonexistent-2.mk
+-include makeit.mk
+sinclude makeit.mk
+
+error: makeit.mk
+EOF
+
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile2");
+
+print MAKEFILE "ANOTHER: ; \@echo This is another included makefile\n";
+
+close(MAKEFILE);
+
+# Create the answer to what should be produced by this Makefile
+&run_make_with_options($makefile, "all", &get_logfile);
+$answer = "There should be no errors for this makefile.\n";
+&compare_output($answer, &get_logfile(1));
+
+&run_make_with_options($makefile, "ANOTHER", &get_logfile);
+$answer = "This is another included makefile\n";
+&compare_output($answer, &get_logfile(1));
+
+$makefile = undef;
+
+# Try to build the "error" target; this will fail since we don't know
+# how to create makeit.mk, but we should also get a message (even though
+# the -include suppressed it during the makefile read phase, we should
+# see one during the makefile run phase).
+
+run_make_test
+  ('
+-include foo.mk
+error: foo.mk ; @echo $@
+',
+   '',
+   "#MAKE#: *** No rule to make target 'foo.mk', needed by 'error'.  Stop.\n",
+   512
+  );
+
+# Make sure that target-specific variables don't impact things.  This could
+# happen because a file record is created when a target-specific variable is
+# set.
+
+run_make_test
+  ('
+bar.mk: foo := baz
+-include bar.mk
+hello: ; @echo hello
+',
+   '',
+   "hello\n"
+  );
+
+
+# Test inheritance of dontcare flag when rebuilding makefiles.
+#
+run_make_test('
+.PHONY: all
+all: ; @:
+
+-include foo
+
+foo: bar; @:
+', '', '');
+
+
+# Make sure that we don't die when the command fails but we dontcare.
+# (Savannah bug #13216).
+#
+run_make_test('
+.PHONY: all
+all:; @:
+
+-include foo
+
+foo: bar; @:
+
+bar:; @exit 1
+', '', '');
+
+# Check include, sinclude, -include with no filenames.
+# (Savannah bug #1761).
+
+run_make_test('
+.PHONY: all
+all:; @:
+include
+-include
+sinclude', '', '');
+
+
+# Test that the diagnostics is issued even if the target has been
+# tried before with the dontcare flag (direct dependency case).
+#
+run_make_test('
+-include foo
+
+all: bar
+
+foo: baz
+bar: baz
+',
+'',
+"#MAKE#: *** No rule to make target 'baz', needed by 'bar'.  Stop.\n",
+512);
+
+# Test that the diagnostics is issued even if the target has been
+# tried before with the dontcare flag (indirect dependency case).
+#
+run_make_test('
+-include foo
+
+all: bar
+
+foo: baz
+bar: baz
+baz: end
+',
+'',
+"#MAKE#: *** No rule to make target 'end', needed by 'baz'.  Stop.\n",
+512);
+
+# Test that the diagnostics is issued even if the target has been
+# tried before with the dontcare flag (include/-include case).
+#
+run_make_test('
+include bar
+-include foo
+
+all:
+
+foo: baz
+bar: baz
+baz: end
+',
+'',
+"#MAKEFILE#:2: bar: No such file or directory
+#MAKE#: *** No rule to make target 'end', needed by 'baz'.  Stop.\n",
+512);
+
+if ($all_tests) {
+    # Test that include of a rebuild-able file doesn't show a warning
+    # Savannah bug #102
+    run_make_test(q!
+include foo
+foo: ; @echo foo = bar > $@
+!,
+                  '', "#MAKE#: 'foo' is up to date.\n");
+    rmfiles('foo');
+}
+
+1;
diff --git a/tests/scripts/features/jobserver b/tests/scripts/features/jobserver
new file mode 100644
index 0000000..cedd4b3
--- /dev/null
+++ b/tests/scripts/features/jobserver
@@ -0,0 +1,61 @@
+#                                                                    -*-perl-*-
+
+$description = "Test jobserver.";
+
+$details = "These tests are ones that specifically are different when the
+jobserver feature is available.  Most -j tests are the same whether or not
+jobserver is available, and those appear in the 'parallelism' test suite.";
+
+exists $FEATURES{'jobserver'} or return -1;
+
+if (!$parallel_jobs) {
+  return -1;
+}
+
+# Don't put --jobserver-fds into a re-exec'd MAKEFLAGS.
+# We can't test this directly because there's no way a makefile can
+# show the value of MAKEFLAGS we were re-exec'd with.  We can intuit it
+# by looking for "disabling jobserver mode" warnings; we should only
+# get one from the original invocation and none from the re-exec.
+# See Savannah bug #18124
+
+unlink('inc.mk');
+
+run_make_test(q!
+-include inc.mk
+recur:
+#	@echo 'MAKEFLAGS = $(MAKEFLAGS)'
+	@rm -f inc.mk
+	@$(MAKE) -j2 -f #MAKEFILE# all
+all:
+#	@echo 'MAKEFLAGS = $(MAKEFLAGS)'
+	@echo $@
+inc.mk:
+#	@echo 'MAKEFLAGS = $(MAKEFLAGS)'
+	@echo 'FOO = bar' > $@
+!,
+              '--no-print-directory -j2', "#MAKE#[1]: warning: -jN forced in submake: disabling jobserver mode.\nall\n");
+
+unlink('inc.mk');
+
+# Test recursion when make doesn't think it exists.
+# See Savannah bug #39934
+# Or Red Hat bug https://bugzilla.redhat.com/show_bug.cgi?id=885474
+
+open(MAKEFILE,"> Makefile2");
+print MAKEFILE '
+vpath %.c ../
+foo:
+';
+close(MAKEFILE);
+
+run_make_test(q!
+default: ; @ #MAKEPATH# -f Makefile2
+!,
+              '-j2 --no-print-directory',
+"#MAKE#[1]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
+#MAKE#[1]: Nothing to be done for 'foo'.");
+
+rmfiles('Makefile2');
+
+1;
diff --git a/tests/scripts/features/load b/tests/scripts/features/load
new file mode 100644
index 0000000..1f8cdc2
--- /dev/null
+++ b/tests/scripts/features/load
@@ -0,0 +1,110 @@
+#                                                                    -*-perl-*-
+$description = "Test the load operator.";
+
+$details = "Test dynamic loading of modules.";
+
+# Don't do anything if this system doesn't support "load"
+exists $FEATURES{load} or return -1;
+
+# First build a shared object
+# Provide both a default and non-default load symbol
+
+unlink(qw(testload.c testload.so));
+
+open(my $F, '> testload.c') or die "open: testload.c: $!\n";
+print $F <<'EOF' ;
+#include <string.h>
+#include <stdio.h>
+
+#include "gnumake.h"
+
+int plugin_is_GPL_compatible;
+
+int
+testload_gmk_setup (gmk_floc *pos)
+{
+    (void)pos;
+    gmk_eval ("TESTLOAD = implicit", 0);
+    return 1;
+}
+
+int
+explicit_setup (gmk_floc *pos)
+{
+    (void)pos;
+    gmk_eval ("TESTLOAD = explicit", 0);
+    return 1;
+}
+EOF
+close($F) or die "close: testload.c: $!\n";
+
+# Make sure we can compile
+# CONFIG_FLAGS are loaded from config-flags.pm and set by configure
+
+my $sobuild = "$CONFIG_FLAGS{CC} ".($srcdir? "-I$srcdir":'')." $CONFIG_FLAGS{CPPFLAGS} $CONFIG_FLAGS{CFLAGS} -shared -fPIC $CONFIG_FLAGS{LDFLAGS} -o testload.so testload.c";
+
+my $clog = `$sobuild 2>&1`;
+if ($? != 0) {
+    $verbose and print "Failed to build testload.so:\n$sobuild\n$_";
+    return -1;
+}
+
+# TEST 1
+run_make_test(q!
+PRE := $(.LOADED)
+load testload.so
+POST := $(.LOADED)
+all: ; @echo pre=$(PRE) post=$(POST) $(TESTLOAD)
+!,
+              '', "pre= post=testload.so implicit\n");
+
+# TEST 2
+# Load using an explicit function
+run_make_test(q!
+PRE := $(.LOADED)
+load ./testload.so(explicit_setup)
+POST := $(.LOADED)
+all: ; @echo pre=$(PRE) post=$(POST) $(TESTLOAD)
+!,
+              '', "pre= post=testload.so explicit\n");
+
+# TEST 4
+# Check multiple loads
+run_make_test(q!
+PRE := $(.LOADED)
+load ./testload.so
+load testload.so(explicit_setup)
+POST := $(.LOADED)
+all: ; @echo pre=$(PRE) post=$(POST) $(TESTLOAD)
+!,
+              '', "pre= post=testload.so implicit\n");
+
+# TEST 5
+# Check auto-rebuild of loaded file that's out of date
+utouch(-10, 'testload.so');
+touch('testload.c');
+
+run_make_test(q!
+PRE := $(.LOADED)
+load ./testload.so
+POST := $(.LOADED)
+all: ; @echo pre=$(PRE) post=$(POST) $(TESTLOAD)
+testload.so: testload.c ; @echo "rebuilding $@"; !.$sobuild,
+              '', "rebuilding testload.so\npre= post=testload.so implicit\n");
+
+# TEST 5
+# Check auto-rebuild of loaded file when it doesn't exist
+unlink('testload.so');
+
+run_make_test(q!
+PRE := $(.LOADED)
+-load ./testload.so(explicit_setup)
+POST := $(.LOADED)
+all: ; @echo pre=$(PRE) post=$(POST) $(TESTLOAD)
+%.so: %.c ; @echo "rebuilding $@"; !.$sobuild,
+              '', "rebuilding testload.so\npre= post=testload.so explicit\n");
+
+unlink(qw(testload.c testload.so)) unless $keep;
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/loadapi b/tests/scripts/features/loadapi
new file mode 100644
index 0000000..8c824c0
--- /dev/null
+++ b/tests/scripts/features/loadapi
@@ -0,0 +1,116 @@
+#                                                                    -*-perl-*-
+$description = "Test the shared object load API.";
+
+$details = "Verify the different aspects of the shared object API.";
+
+# Don't do anything if this system doesn't support "load"
+exists $FEATURES{load} or return -1;
+
+# First build a shared object
+# Provide both a default and non-default load symbol
+
+unlink(qw(testapi.c testapi.so));
+
+open(my $F, '> testapi.c') or die "open: testapi.c: $!\n";
+print $F <<'EOF' ;
+#include <string.h>
+#include <stdio.h>
+
+#include "gnumake.h"
+
+int plugin_is_GPL_compatible;
+
+static char *
+test_eval (const char *buf)
+{
+    gmk_eval (buf, 0);
+    return NULL;
+}
+
+static char *
+test_expand (const char *val)
+{
+    return gmk_expand (val);
+}
+
+static char *
+test_noexpand (const char *val)
+{
+    char *str = gmk_alloc (strlen (val) + 1);
+    strcpy (str, val);
+    return str;
+}
+
+static char *
+func_test (const char *funcname, unsigned int argc, char **argv)
+{
+    char *mem;
+
+    if (strcmp (funcname, "test-expand") == 0)
+        return test_expand (argv[0]);
+
+    if (strcmp (funcname, "test-eval") == 0)
+        return test_eval (argv[0]);
+
+    if (strcmp (funcname, "test-noexpand") == 0)
+        return test_noexpand (argv[0]);
+
+    mem = gmk_alloc (sizeof ("unknown"));
+    strcpy (mem, "unknown");
+    return mem;
+}
+
+int
+testapi_gmk_setup ()
+{
+    gmk_add_function ("test-expand", func_test, 1, 1, GMK_FUNC_DEFAULT);
+    gmk_add_function ("test-noexpand", func_test, 1, 1, GMK_FUNC_NOEXPAND);
+    gmk_add_function ("test-eval", func_test, 1, 1, GMK_FUNC_DEFAULT);
+    gmk_add_function ("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789-_.", func_test, 0, 0, 0);
+    return 1;
+}
+EOF
+close($F) or die "close: testapi.c: $!\n";
+
+my $sobuild = "$CONFIG_FLAGS{CC} ".($srcdir? "-I$srcdir":'')." $CONFIG_FLAGS{CPPFLAGS} $CONFIG_FLAGS{CFLAGS} -shared -fPIC $CONFIG_FLAGS{LDFLAGS} -o testapi.so testapi.c";
+
+my $clog = `$sobuild 2>&1`;
+if ($? != 0) {
+    $verbose and print "Failed to build testapi.so:\n$sobuild\n$_";
+    return -1;
+}
+
+# TEST 1
+# Check the gmk_expand() function
+run_make_test(q!
+EXPAND = expansion
+all: ; @echo $(test-expand $$(EXPAND))
+load testapi.so
+!,
+              '', "expansion\n");
+
+# TEST 2
+# Check the eval operation.  Prove that the argument is expanded only once
+run_make_test(q!
+load testapi.so
+TEST = bye
+ASSIGN = VAR = $(TEST) $(shell echo there)
+$(test-eval $(value ASSIGN))
+TEST = hi
+all:;@echo '$(VAR)'
+!,
+              '', "hi there\n");
+
+# TEST 2
+# Check the no-expand capability
+run_make_test(q!
+load testapi.so
+TEST = hi
+all:;@echo '$(test-noexpand $(TEST))'
+!,
+              '', "\$(TEST)\n");
+
+unlink(qw(testapi.c testapi.so)) unless $keep;
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/mult_rules b/tests/scripts/features/mult_rules
new file mode 100644
index 0000000..e706e17
--- /dev/null
+++ b/tests/scripts/features/mult_rules
@@ -0,0 +1,78 @@
+$description = "\
+The following test creates a makefile to test the presence
+of multiple rules for one target.  One file can be the
+target of several rules if at most one rule has commands;
+the other rules can only have dependencies.";
+
+$details = "\
+The makefile created in this test contains two hardcoded rules
+for foo.o and bar.o.  It then gives another multiple target rule
+with the same names as above but adding more dependencies.
+Additionally, another variable extradeps is listed as a
+dependency but is defined to be null.  It can however be defined
+on the make command line as extradeps=extra.h which adds yet
+another dependency to the targets.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<EOF;
+objects = foo.o bar.o
+foo.o : defs.h
+bar.o : defs.h test.h
+extradeps = 
+\$(objects) : config.h \$(extradeps) 
+\t\@echo EXTRA EXTRA
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch("defs.h","test.h","config.h");
+
+if ($vos)
+{
+   $error_code = 3307;
+}
+else 
+{
+   $error_code = 512;
+}
+
+&run_make_with_options($makefile,
+                       "extradeps=extra.h",
+                       &get_logfile,
+                       $error_code);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "$make_name: *** No rule to make target 'extra.h', needed by 'foo.o'.  Stop.\n";
+
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #2
+# -------
+
+&touch("extra.h");
+
+&run_make_with_options($makefile,
+                       "extradeps=extra.h",
+                       &get_logfile,
+                       0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "EXTRA EXTRA\n";
+
+&compare_output($answer,&get_logfile(1));
+
+unlink("defs.h","test.h","config.h","extra.h");
+
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/features/mult_targets b/tests/scripts/features/mult_targets
new file mode 100644
index 0000000..c8ff418
--- /dev/null
+++ b/tests/scripts/features/mult_targets
@@ -0,0 +1,46 @@
+$description = "The following test creates a makefile to test that a \n "
+              ."rule with multiple targets is equivalent to writing \n"
+              ."many rules, each with one target, and all identical aside\n"
+              ."from that.";
+
+$details = "A makefile is created with one rule and two targets.  Make \n"
+          ."is called twice, once for each target, and the output which \n"
+          ."contains the target name with \$@ is looked at for the changes.\n"
+          ."This test also tests the substitute function by replacing \n"
+          ."the word output with nothing in the target name giving either\n"
+          ."an output of \"I am little\" or \"I am big\"";  
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "bigoutput littleoutput: test.h\n";
+print MAKEFILE "\t\@echo I am \$(subst output,,\$@)\n";  
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch("test.h");
+
+&run_make_with_options($makefile,"bigoutput",&get_logfile);
+
+
+# Create the answer to what should be produced by this Makefile
+$answer = "I am big\n";
+
+&compare_output($answer,&get_logfile(1));
+
+&run_make_with_options($makefile,"littleoutput",&get_logfile);
+$answer = "I am little\n";
+&compare_output($answer,&get_logfile(1));
+
+unlink "test.h";
+
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/features/order_only b/tests/scripts/features/order_only
new file mode 100644
index 0000000..4ebdc2b
--- /dev/null
+++ b/tests/scripts/features/order_only
@@ -0,0 +1,118 @@
+#                                                                    -*-perl-*-
+$description = "Test order-only prerequisites.";
+
+$details = "\
+Create makefiles with various combinations of normal and order-only
+prerequisites and ensure they behave properly.  Test the \$| variable.";
+
+# TEST #0 -- Basics
+
+run_make_test('
+%r: | baz ; @echo $< $^ $|
+bar: foo
+foo:;@:
+baz:;@:',
+              '', "foo foo baz\n");
+
+# TEST #1 -- First try: the order-only prereqs need to be built.
+
+run_make_test(q!
+foo: bar | baz
+	@echo '$$^ = $^'
+	@echo '$$| = $|'
+	touch $@
+
+.PHONY: baz
+
+bar baz:
+	touch $@!,
+              '', "touch bar\ntouch baz\n\$^ = bar\n\$| = baz\ntouch foo\n");
+
+
+# TEST #2 -- now we do it again: baz is PHONY but foo should _NOT_ be updated
+
+run_make_test(undef, '', "touch baz\n");
+
+unlink(qw(foo bar baz));
+
+# TEST #3 -- Make sure the order-only prereq was promoted to normal.
+
+run_make_test(q!
+foo: bar | baz
+	@echo '$$^ = $^'
+	@echo '$$| = $|'
+	touch $@
+
+foo: baz
+
+.PHONY: baz
+
+bar baz:
+	touch $@!,
+              '', "touch bar\ntouch baz\n\$^ = bar baz\n\$| = \ntouch foo\n");
+
+
+# TEST #4 -- now we do it again
+
+run_make_test(undef, '', "touch baz\n\$^ = bar baz\n\$| = \ntouch foo\n");
+
+unlink(qw(foo bar baz));
+
+# Test empty normal prereqs
+
+# TEST #5 -- make sure the parser was correct.
+
+run_make_test(q!
+foo:| baz
+	@echo '$$^ = $^'
+	@echo '$$| = $|'
+	touch $@
+
+.PHONY: baz
+
+baz:
+	touch $@!,
+              '', "touch baz\n\$^ = \n\$| = baz\ntouch foo\n");
+
+# TEST #6 -- now we do it again: this time foo won't be built
+
+run_make_test(undef, '', "touch baz\n");
+
+unlink(qw(foo baz));
+
+# Test order-only in pattern rules
+
+# TEST #7 -- make sure the parser was correct.
+
+run_make_test(q!
+%.w : %.x | baz
+	@echo '$$^ = $^'
+	@echo '$$| = $|'
+	touch $@
+
+all: foo.w
+
+.PHONY: baz
+foo.x baz:
+	touch $@!,
+              '',
+              "touch foo.x\ntouch baz\n\$^ = foo.x\n\$| = baz\ntouch foo.w\n");
+
+# TEST #8 -- now we do it again: this time foo.w won't be built
+
+run_make_test(undef, '', "touch baz\n");
+
+unlink(qw(foo.w foo.x baz));
+
+# TEST #9 -- make sure that $< is set correctly in the face of order-only
+# prerequisites in pattern rules.
+
+run_make_test('
+%r: | baz ; @echo $< $^ $|
+bar: foo
+foo:;@:
+baz:;@:',
+              '', "foo foo baz\n");
+
+
+1;
diff --git a/tests/scripts/features/output-sync b/tests/scripts/features/output-sync
new file mode 100644
index 0000000..a7534cb
--- /dev/null
+++ b/tests/scripts/features/output-sync
@@ -0,0 +1,341 @@
+#                                                                    -*-perl-*-
+
+$description = "Test --output-sync (-O) option.";
+
+$details = "Test the synchronization of output from parallel jobs.";
+
+# If we don't have output sync support, never mind.
+exists $FEATURES{'output-sync'} or return -1;
+
+# Output sync can't be tested without parallelization
+$parallel_jobs or return -1;
+
+
+if ($vos) {
+  $sleep_command = "sleep -seconds";
+}
+else {
+  $sleep_command = "sleep";
+}
+
+# The following subdirectories with Makefiles are used in several
+# of the following tests.  The model is:
+#   foo/Makefile - has a "foo" target that waits for the bar target
+#   bar/Makefile - has a "bar" target that runs immediately
+#                - has a "baz" target that waits for the foo target
+#
+# So, you start the two sub-makes in parallel and first the "bar" target is
+# built, followed by "foo", followed by "baz".  The trick is that first each
+# target prints a "start" statement, then waits (if appropriate), then prints
+# an end statement.  Thus we can tell if the -O flag is working, since
+# otherwise these statements would be mixed together.
+
+@syncfiles = ();
+
+sub output_sync_clean {
+    rmfiles('foo/Makefile', 'bar/Makefile', @syncfiles);
+    rmdir('foo');
+    rmdir('bar');
+}
+
+# We synchronize the different jobs by having them wait for a sentinel file to
+# be created, instead of relying on a certain amount of time passing.
+# Unfortunately in this test we have to sleep after we see the sync file,
+# since we also want to make the obtaining of the write synchronization lock
+# reliable.  If things are too fast, then sometimes a different job will steal
+# the output sync lock and the output is mis-ordered from what we expect.
+sub output_sync_wait {
+    return "while [ ! -f ../mksync.$_[0] ]; do :; done; rm -f ../mksync.$_[0].wait; $sleep_command 1";
+}
+sub output_sync_set {
+    return "date > ../mksync.$_[0]";
+}
+
+@syncfiles = qw(mksync.foo mksync.foo_start mksync.bar mksync.bar_start);
+
+output_sync_clean();
+mkdir('foo', 0777);
+mkdir('bar', 0777);
+
+$set_foo = output_sync_set('foo');
+$set_bar = output_sync_set('bar');
+$set_foo_start = output_sync_set('foo_start');
+$set_bar_start = output_sync_set('bar_start');
+
+$wait_foo = output_sync_wait('foo');
+$wait_bar = output_sync_wait('bar');
+$wait_foo_start = output_sync_set('foo_start');
+$wait_bar_start = output_sync_set('bar_start');
+
+open(MAKEFILE,"> foo/Makefile");
+print MAKEFILE <<EOF;
+all: foo
+
+foo: foo-base ; \@$set_foo
+
+foo-base:
+\t\@echo foo: start
+\t\@$wait_bar
+\t\@echo foo: end
+
+foo-job: foo-job-base ; \@$set_foo
+
+foo-job-base:
+\t\@$wait_bar_start
+\t\@echo foo: start
+\t\@$set_foo_start
+\t\@$wait_bar
+\t\@echo foo: end
+
+foo-fail:
+\t\@echo foo-fail: start
+\t\@$wait_bar
+\t\@echo foo-fail: end
+\t\@exit 1
+EOF
+close(MAKEFILE);
+
+open(MAKEFILE,"> bar/Makefile");
+print MAKEFILE <<EOF;
+all: bar baz
+
+bar: bar-base ; \@$set_bar
+bar-base:
+\t\@echo bar: start
+\t\@echo bar: end
+
+bar-job: bar-job-base ; \@$set_bar
+
+bar-job-base:
+\t\@echo bar: start
+\t\@$set_bar_start
+\t\@$wait_foo_start
+\t\@echo bar: end
+
+baz: baz-base
+baz-base:
+\t\@echo baz: start
+\t\@$wait_foo
+\t\@echo baz: end
+EOF
+close(MAKEFILE);
+
+# Test per-make synchronization.
+unlink(@syncfiles);
+run_make_test(qq!
+all: make-foo make-bar
+
+make-foo: ; \$(MAKE) -C foo
+
+make-bar: ; \$(MAKE) -C bar!,
+              '-j -Orecurse',
+"#MAKEPATH# -C foo
+#MAKE#[1]: Entering directory '#PWD#/foo'
+foo: start
+foo: end
+#MAKE#[1]: Leaving directory '#PWD#/foo'
+#MAKEPATH# -C bar
+#MAKE#[1]: Entering directory '#PWD#/bar'
+bar: start
+bar: end
+baz: start
+baz: end
+#MAKE#[1]: Leaving directory '#PWD#/bar'\n", 0, 6);
+
+# Test per-target synchronization.
+# Note we have to sleep again here after starting the foo makefile before
+# starting the bar makefile, otherwise the "entering/leaving" messages for the
+# submakes might be ordered differently than we expect.
+
+unlink(@syncfiles);
+run_make_test(qq!
+x=1
+\$xMAKEFLAGS += --no-print-directory
+
+all: make-foo make-bar
+
+make-foo: ; \$(MAKE) -C foo
+
+make-bar: ; $sleep_command 1 ; \$(MAKE) -C bar!,
+              '-j --output-sync=target',
+"#MAKEPATH# -C foo
+$sleep_command 1 ; #MAKEPATH# -C bar
+#MAKE#[1]: Entering directory '#PWD#/bar'
+bar: start
+bar: end
+#MAKE#[1]: Leaving directory '#PWD#/bar'
+#MAKE#[1]: Entering directory '#PWD#/foo'
+foo: start
+foo: end
+#MAKE#[1]: Leaving directory '#PWD#/foo'
+#MAKE#[1]: Entering directory '#PWD#/bar'
+baz: start
+baz: end
+#MAKE#[1]: Leaving directory '#PWD#/bar'\n", 0, 6);
+
+# Rerun but this time suppress the directory tracking
+unlink(@syncfiles);
+run_make_test(undef, '-j --output-sync=target x=',
+              "#MAKEPATH# -C foo
+$sleep_command 1 ; #MAKEPATH# -C bar
+bar: start
+bar: end
+foo: start
+foo: end
+baz: start
+baz: end\n", 0, 6);
+
+# Test that messages from make itself are enclosed with
+# "Entering/Leaving directory" messages.
+unlink(@syncfiles);
+run_make_test(qq!
+all: make-foo-fail make-bar-bar
+
+make-foo-fail: ; \$(MAKE) -C foo foo-fail
+
+make-bar-bar: ; $sleep_command 1 ; \$(MAKE) -C bar bar!,
+              '-j -O',
+"#MAKEPATH# -C foo foo-fail
+$sleep_command 1 ; #MAKEPATH# -C bar bar
+#MAKE#[1]: Entering directory '#PWD#/bar'
+bar: start
+bar: end
+#MAKE#[1]: Leaving directory '#PWD#/bar'
+#MAKE#[1]: Entering directory '#PWD#/foo'
+foo-fail: start
+foo-fail: end
+Makefile:20: recipe for target 'foo-fail' failed
+#MAKE#[1]: *** [foo-fail] Error 1
+#MAKE#[1]: Leaving directory '#PWD#/foo'
+#MAKEFILE#:4: recipe for target 'make-foo-fail' failed
+#MAKE#: *** [make-foo-fail] Error 2\n",
+512);
+
+# Test the per-job synchronization.
+# For this we'll have bar-job:
+#   print start, invoke bar-start, wait for foo-start, print end, print-bar-end
+# And foo-job:
+#   wait for bar-start, print foo-start, wait for bar-end, print end
+
+unlink(@syncfiles);
+run_make_test(qq!
+all: make-foo make-bar
+
+make-foo: ; \$(MAKE) -C foo foo-job
+
+make-bar: ; $sleep_command 1 ; \$(MAKE) -C bar bar-job!,
+              '-j --output-sync=line',
+"#MAKEPATH# -C foo foo-job
+$sleep_command 1 ; #MAKEPATH# -C bar bar-job
+#MAKE#[1]: Entering directory '#PWD#/foo'
+foo: start
+#MAKE#[1]: Leaving directory '#PWD#/foo'
+#MAKE#[1]: Entering directory '#PWD#/bar'
+bar: start
+#MAKE#[1]: Leaving directory '#PWD#/bar'
+#MAKE#[1]: Entering directory '#PWD#/bar'
+bar: end
+#MAKE#[1]: Leaving directory '#PWD#/bar'
+#MAKE#[1]: Entering directory '#PWD#/foo'
+foo: end
+#MAKE#[1]: Leaving directory '#PWD#/foo'\n", 0, 6);
+
+
+# Remove temporary directories and contents.
+output_sync_clean();
+
+# Ensure recursion doesn't mis-order or double-print output
+run_make_test(qq!
+all:
+\t\@echo foo
+\t\@+echo bar
+!,
+              '-j -Oline', "foo\nbar\n");
+
+run_make_test(undef, '-j -Otarget', "foo\nbar\n");
+
+# Ensure when make writes out command it's not misordered
+run_make_test(qq!
+all:
+\t\@echo foobar
+\ttrue
+!,
+              '-j -Oline', "foobar\ntrue\n");
+
+run_make_test(undef, '-j -Otarget', "foobar\ntrue\n");
+
+# Ensure that shell functions inside recipes write stderr to the sync file
+run_make_test(q!
+all: ; @: $(shell echo foo 1>&2)
+!,
+              '-w -Oline', "#MAKE#: Entering directory '#PWD#'\nfoo\n#MAKE#: Leaving directory '#PWD#'\n");
+
+# Ensure that output generated while parsing makefiles is synced
+# when appropriate.
+run_make_test(q!
+$(shell echo foo 1>&2)
+all: ; echo bar
+!,
+              '-s -w -Otarget', "#MAKE#: Entering directory '#PWD#'\nfoo\n#MAKE#: Leaving directory '#PWD#'\n#MAKE#: Entering directory '#PWD#'\nbar\n#MAKE#: Leaving directory '#PWD#'\n");
+
+# Test recursion
+$m1 = get_tmpfile();
+$m2 = get_tmpfile();
+
+open(M1, "> $m1");
+print M1 <<'EOF';
+$(shell echo d1 stderr 1>&2)
+$(info d1 stdout)
+all:; @:
+EOF
+close(M1);
+
+open(M2, "> $m2");
+print M2 <<'EOF';
+$(shell echo d2 stderr 1>&2)
+$(info d2 stdout)
+all:; @:
+# Force an ordering on the output
+$(shell sleep 1)
+EOF
+close(M2);
+
+run_make_test(qq!
+all: t1 t2
+t1: ; \@\$(MAKE) -f $m1
+t2: ; \@\$(MAKE) -f $m2
+!,
+              "-j -Oline", "#MAKE#[1]: Entering directory '#PWD#'\nd1 stderr\nd1 stdout\n#MAKE#[1]: Leaving directory '#PWD#'\n#MAKE#[1]: Entering directory '#PWD#'\nd2 stderr\nd2 stdout\n#MAKE#[1]: Leaving directory '#PWD#'\n");
+
+rmfiles($m1, $m2);
+
+# Ensure that output generated while parsing makefiles is synced
+# when appropriate.
+$m1 = get_tmpfile();
+
+open(M1, "> $m1");
+print M1 <<'EOF';
+$(shell echo d1 stderr 1>&2)
+$(info d1 stdout)
+$(error d1 failed)
+all:; @:
+EOF
+close(M1);
+
+run_make_test(qq!
+all: t1
+t1: ; -\@\$(MAKE) -f $m1
+!,
+              "-j -Oline", "#MAKE#[1]: Entering directory '#PWD#'\nd1 stderr\nd1 stdout\n$m1:3: *** d1 failed.  Stop.\n#MAKE#[1]: Leaving directory '#PWD#'\n#MAKEFILE#:3: recipe for target 't1' failed\n#MAKE#: [t1] Error 2 (ignored)\n");
+
+rmfiles($m1);
+
+# Test $(error ...) functions in recipes
+
+run_make_test(q!
+foo: $(OBJS) ; echo $(or $(filter %.o,$^),$(error fail))
+!,
+              '-O', "#MAKEFILE#:2: *** fail.  Stop.\n", 512);
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/override b/tests/scripts/features/override
new file mode 100644
index 0000000..fff6c4e
--- /dev/null
+++ b/tests/scripts/features/override
@@ -0,0 +1,45 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the override directive on variable assignments.";
+
+$details = "";
+
+# TEST 0: Basic override
+
+run_make_test('
+X = start
+override recur = $(X)
+override simple := $(X)
+X = end
+all: ; @echo "$(recur) $(simple)"
+',
+              'recur=I simple=J', "end start\n");
+
+# TEST 1: Override with append
+
+run_make_test('
+X += X1
+override X += X2
+override Y += Y1
+Y += Y2
+all: ; @echo "$(X) $(Y)"
+',
+              '', "X1 X2 Y1\n");
+
+# TEST 2: Override with append to the command line
+
+run_make_test(undef, 'X=C Y=C', "C X2 C Y1\n");
+
+# Test override of define/endef
+
+run_make_test('
+override define foo
+@echo First comes the definition.
+@echo Then comes the override.
+endef
+all: ; $(foo)
+',
+              'foo=Hello', "First comes the definition.\nThen comes the override.\n");
+
+
+1;
diff --git a/tests/scripts/features/parallelism b/tests/scripts/features/parallelism
new file mode 100644
index 0000000..c702c26
--- /dev/null
+++ b/tests/scripts/features/parallelism
@@ -0,0 +1,216 @@
+#                                                                    -*-perl-*-
+
+$description = "Test parallelism (-j) option.";
+
+
+$details = "This test creates a makefile with two double-colon default
+rules.  The first rule has a series of sleep and echo commands
+intended to run in series.  The second and third have just an
+echo statement.  When make is called in this test, it is given
+the -j option with a value of 4.  This tells make that it may
+start up to four jobs simultaneously.  In this case, since the
+first command is a sleep command, the output of the second
+and third commands will appear before the first if indeed
+make is running all of these commands in parallel.";
+
+if (!$parallel_jobs) {
+  return -1;
+}
+
+if ($vos) {
+  $sleep_command = "sleep -seconds";
+}
+else {
+  $sleep_command = "sleep";
+}
+
+
+run_make_test("
+all : def_1 def_2 def_3
+def_1 : ; \@echo ONE; $sleep_command 3 ; echo TWO
+def_2 : ; \@$sleep_command 2 ; echo THREE
+def_3 : ; \@$sleep_command 1 ; echo FOUR",
+              '-j4', "ONE\nFOUR\nTHREE\nTWO");
+
+# Test parallelism with included files.  Here we sleep/echo while
+# building the included files, to test that they are being built in
+# parallel.
+run_make_test("
+all: 1 2; \@echo success
+-include 1.inc 2.inc
+1.inc: ; \@echo ONE.inc; $sleep_command 2; echo TWO.inc; echo '1: ; \@echo ONE; $sleep_command 2; echo TWO' > \$\@
+2.inc: ; \@$sleep_command 1; echo THREE.inc; echo '2: ; \@$sleep_command 1; echo THREE' > \$\@",
+              "-j4",
+              "ONE.inc\nTHREE.inc\nTWO.inc\nONE\nTHREE\nTWO\nsuccess\n", 0, 7);
+
+rmfiles(qw(1.inc 2.inc));
+
+
+# Test parallelism with included files--this time recurse first and make
+# sure the jobserver works.
+run_make_test("
+recurse: ; \@\$(MAKE) --no-print-directory -f #MAKEFILE# INC=yes all
+all: 1 2; \@echo success
+
+INC = no
+ifeq (\$(INC),yes)
+-include 1.inc 2.inc
+endif
+
+1.inc: ; \@echo ONE.inc; $sleep_command 2; echo TWO.inc; echo '1: ; \@echo ONE; $sleep_command 2; echo TWO' > \$\@
+2.inc: ; \@$sleep_command 1; echo THREE.inc; echo '2: ; \@$sleep_command 1; echo THREE' > \$\@",
+              "-j4",
+              "ONE.inc\nTHREE.inc\nTWO.inc\nONE\nTHREE\nTWO\nsuccess\n", 0, 7);
+
+rmfiles(qw(1.inc 2.inc));
+
+# Grant Taylor reports a problem where tokens can be lost (not written back
+# to the pipe when they should be): this happened when there is a $(shell ...)
+# function in an exported recursive variable.  I added some code to check
+# for this situation and print a message if it occurred.  This test used
+# to trigger this code when I added it but no longer does after the fix.
+# We have to increase the timeout from the default (5s) on this test.
+
+run_make_test("
+export HI = \$(shell \$(\$\@.CMD))
+first.CMD = echo hi
+second.CMD = $sleep_command 4; echo hi
+
+.PHONY: all first second
+all: first second
+
+first second: ; \@echo \$\@; $sleep_command 1; echo \$\@",
+              '-j2', "first\nfirst\nsecond\nsecond", 0, 7);
+
+# Michael Matz <matz@suse.de> reported a bug where if make is running in
+# parallel without -k and two jobs die in a row, but not too close to each
+# other, then make will quit without waiting for the rest of the jobs to die.
+
+run_make_test("
+.PHONY: all fail.1 fail.2 fail.3 ok
+all: fail.1 ok fail.2 fail.3
+
+fail.1 fail.2 fail.3:
+	\@$sleep_command \$(patsubst fail.%,%,\$\@)
+	\@echo Fail
+	\@exit 1
+
+ok:
+	\@$sleep_command 4
+	\@echo Ok done",
+              '-rR -j5', "Fail
+#MAKEFILE#:6: recipe for target 'fail.1' failed
+#MAKE#: *** [fail.1] Error 1
+#MAKE#: *** Waiting for unfinished jobs....
+Fail
+#MAKEFILE#:6: recipe for target 'fail.2' failed
+#MAKE#: *** [fail.2] Error 1
+Fail
+#MAKEFILE#:6: recipe for target 'fail.3' failed
+#MAKE#: *** [fail.3] Error 1
+Ok done",
+             512);
+
+
+# Test for Savannah bug #15641.
+#
+run_make_test('
+.PHONY: all
+all:; @:
+
+-include foo.d
+
+foo.d: comp
+	@echo building $@
+
+comp: mod_a.o mod_b.o; @:
+
+mod_a.o mod_b.o:
+	@exit 1
+', '-j2', '');
+
+
+# TEST #9 -- Savannah bugs 3330 and 15919
+# In earlier versions of make this will either give the wrong answer, or hang.
+
+utouch(-10, 'target');
+run_make_test('target: intermed ; touch $@
+
+.INTERMEDIATE: intermed
+intermed: | phony ; touch $@
+
+.PHONY: phony
+phony: ; : phony', '-rR -j', ': phony');
+rmfiles('target');
+
+# TEST #11: Make sure -jN from MAKEFLAGS is processed even when we re-exec
+# See Savannah bug #33873
+
+$extraENV{MAKEFLAGS} = '-j4';
+
+run_make_test(q!
+things = thing1 thing2
+all: $(things)
+thing1:; @sleep 1; echo '$@ start'; sleep 2; echo '$@ end'
+thing2:; @echo '$@ start'; sleep 2; echo '$@ end'
+-include inc.mk
+inc.mk: ; @touch $@
+!,
+              '', "thing2 start\nthing1 start\nthing2 end\nthing1 end\n");
+
+delete $extraENV{MAKEFLAGS};
+rmfiles('inc.mk');
+
+# Ensure intermediate/secondary files are not pruned incorrectly.
+# See Savannah bug #30653
+
+utouch(-15, 'file2');
+utouch(-10, 'file4');
+utouch(-5,  'file1');
+
+run_make_test(q!
+.INTERMEDIATE: file3
+file4: file3 ; @mv -f $< $@
+file3: file2 ; touch $@
+file2: file1 ; @touch $@
+!,
+              '--no-print-directory -j2', "touch file3");
+
+rmfiles('file1', 'file2', 'file3', 'file4');
+
+# Make sure that all jobserver FDs are closed if we need to re-exec the
+# master copy.
+#
+# First, find the "default" file descriptors we normally use
+# Then make sure they're still used.
+#
+# Right now we don't have a way to run a makefile and capture the output
+# without checking it, so we can't really write this test.
+
+# run_make_test('
+# submake: ; @$(MAKE) --no-print-directory -f #MAKEFILE# fdprint 5>output
+
+# dependfile: ; @echo FOO=bar > $@
+
+# INCL := true
+
+# FOO=foo
+# ifeq ($(INCL),true)
+# -include dependfile
+# endif
+
+# fdprint: ; @echo $(filter --jobserver%,$(MAKEFLAGS))
+
+# recurse: ; @$(MAKE) --no-print-directory -f #MAKEFILE# submake INCL=true',
+#               '-j2 INCL=false fdprint',
+#               'bar');
+
+# rmfiles(qw(dependfile output));
+
+
+# # Do it again, this time where the include is done by the non-master make.
+# run_make_test(undef, '-j2 recurse INCL=false', 'bar');
+
+# rmfiles(qw(dependfile output));
+
+1;
diff --git a/tests/scripts/features/patspecific_vars b/tests/scripts/features/patspecific_vars
new file mode 100644
index 0000000..a530bba
--- /dev/null
+++ b/tests/scripts/features/patspecific_vars
@@ -0,0 +1,148 @@
+#                                                                    -*-perl-*-
+$description = "Test pattern-specific variable settings.";
+
+$details = "\
+Create a makefile containing various flavors of pattern-specific variable
+settings, override and non-override, and using various variable expansion
+rules, semicolon interference, etc.";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+all: one.x two.x three.x
+FOO = foo
+BAR = bar
+BAZ = baz
+one.x: override FOO = one
+%.x: BAR = two
+t%.x: BAR = four
+thr% : override BAZ = three
+one.x two.x three.x: ; @echo $@: $(FOO) $(BAR) $(BAZ)
+four.x: baz ; @echo $@: $(FOO) $(BAR) $(BAZ)
+baz: ; @echo $@: $(FOO) $(BAR) $(BAZ)
+
+# test matching multiple patterns
+a%: AAA = aaa
+%b: BBB = ccc
+a%: BBB += ddd
+%b: AAA ?= xxx
+%b: AAA += bbb
+.PHONY: ab
+ab: ; @echo $(AAA); echo $(BBB)
+EOF
+
+close(MAKEFILE);
+
+
+# TEST #1 -- basics
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "one.x: one two baz\ntwo.x: foo four baz\nthree.x: foo four three\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #2 -- try the override feature
+
+&run_make_with_options($makefile, "BAZ=five", &get_logfile);
+$answer = "one.x: one two five\ntwo.x: foo four five\nthree.x: foo four three\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #3 -- make sure patterns are inherited properly
+
+&run_make_with_options($makefile, "four.x", &get_logfile);
+$answer = "baz: foo two baz\nfour.x: foo two baz\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #4 -- test multiple patterns matching the same target
+
+&run_make_with_options($makefile, "ab", &get_logfile);
+$answer = "aaa bbb\nccc ddd\n";
+&compare_output($answer,&get_logfile(1));
+
+# TEST #5 -- test pattern-specific exported variables
+#
+run_make_test('
+/%: export foo := foo
+
+/bar:
+	@echo $(foo) $$foo
+', '', 'foo foo');
+
+
+# TEST #6 -- test expansion of pattern-specific simple variables
+#
+run_make_test('
+.PHONY: all
+
+all: inherit := good $$t
+all: bar baz
+
+b%: pattern := good $$t
+
+global := original $$t
+
+
+# normal target
+#
+ifdef rec
+bar: a = global: $(global) pattern: $(pattern) inherit: $(inherit)
+else
+bar: a := global: $(global) pattern: $(pattern) inherit: $(inherit)
+endif
+
+bar: ; @echo \'normal: $a;\'
+
+
+# pattern target
+#
+ifdef rec
+%z: a = global: $(global) pattern: $(pattern) inherit: $(inherit)
+else
+%z: a := global: $(global) pattern: $(pattern) inherit: $(inherit)
+endif
+
+%z: ; @echo \'pattern: $a;\'
+
+
+global := new $$t
+',
+'',
+'normal: global: original $t pattern:  inherit: ;
+pattern: global: original $t pattern:  inherit: ;');
+
+
+# TEST #7 -- test expansion of pattern-specific recursive variables
+#
+run_make_test(undef, # reuse previous makefile
+'rec=1',
+'normal: global: new $t pattern: good $t inherit: good $t;
+pattern: global: new $t pattern: good $t inherit: good $t;');
+
+# TEST #8: override in pattern-specific variables
+
+run_make_test('
+a%: override FOO += f1
+a%: FOO += f2
+ab: ; @echo "$(FOO)"
+',
+              '', "f1\n");
+
+run_make_test(undef, 'FOO=C', "C f1\n");
+
+# TEST #9: Test shortest stem selection in pattern-specific variables.
+
+run_make_test('
+%-mt.x: x := two
+%.x: x := one
+
+all: foo.x foo-mt.x
+
+foo.x: ;@echo $x
+foo-mt.x: ;@echo $x
+',
+'',
+"one\ntwo");
+
+1;
diff --git a/tests/scripts/features/patternrules b/tests/scripts/features/patternrules
new file mode 100644
index 0000000..0ff49a7
--- /dev/null
+++ b/tests/scripts/features/patternrules
@@ -0,0 +1,225 @@
+#                                                                    -*-perl-*-
+
+$description = "Test pattern rules.";
+
+$details = "";
+
+use Cwd;
+
+$dir = cwd;
+$dir =~ s,.*/([^/]+)$,../$1,;
+
+
+# TEST #0: Make sure that multiple patterns where the same target
+#          can be built are searched even if the first one fails
+#          to match properly.
+#
+
+run_make_test(q!
+.PHONY: all
+
+all: case.1 case.2 case.3
+
+# We can't have this, due to "Implicit Rule Search Algorithm" step 5c
+#xxx: void
+
+# 1 - existing file
+%.1: void
+	@exit 1
+%.1: #MAKEFILE#
+	@exit 0
+
+# 2 - phony
+%.2: void
+	@exit 1
+%.2: 2.phony
+	@exit 0
+.PHONY: 2.phony
+
+# 3 - implicit-phony
+%.3: void
+	@exit 1
+%.3: 3.implicit-phony
+	@exit 0
+
+3.implicit-phony:
+!, '', '');
+
+# TEST #1: make sure files that are built via implicit rules are marked
+#          as targets (Savannah bug #12202).
+#
+run_make_test('
+TARGETS := foo foo.out
+
+.PHONY: all foo.in
+
+all: $(TARGETS)
+
+%: %.in
+	@echo $@
+
+%.out: %
+	@echo $@
+
+foo.in: ; @:
+
+',
+'',
+'foo
+foo.out');
+
+
+# TEST #2: make sure intermediate files that also happened to be
+#          prerequisites are not removed (Savannah bug #12267).
+#
+run_make_test('
+$(dir)/foo.o:
+
+$(dir)/foo.y:
+	@echo $@
+
+%.c: %.y
+	touch $@
+
+%.o: %.c
+	@echo $@
+
+.PHONY: install
+install: $(dir)/foo.c
+
+',
+"dir=$dir",
+"$dir/foo.y
+touch $dir/foo.c
+$dir/foo.o");
+
+unlink("$dir/foo.c");
+
+
+# TEST #3: make sure precious flag is set properly for targets
+#          that are built via implicit rules (Savannah bug #13218).
+#
+run_make_test('
+.DELETE_ON_ERROR:
+
+.PRECIOUS: %.bar
+
+%.bar:; @touch $@ && exit 1
+
+$(dir)/foo.bar:
+
+',
+"dir=$dir",
+"#MAKEFILE#:6: recipe for target '$dir/foo.bar' failed
+#MAKE#: *** [$dir/foo.bar] Error 1",
+512);
+
+unlink("$dir/foo.bar");
+
+
+# TEST #4: make sure targets of a matched implicit pattern rule are
+#          never considered intermediate (Savannah bug #13022).
+#
+run_make_test('
+.PHONY: all
+all: foo.c foo.o
+
+%.h %.c: %.in
+	touch $*.h
+	touch $*.c
+
+%.o: %.c %.h
+	echo $+ >$@
+
+%.o: %.c
+	@echo wrong rule
+
+foo.in:
+	touch $@
+
+',
+'',
+'touch foo.in
+touch foo.h
+touch foo.c
+echo foo.c foo.h >foo.o');
+
+unlink('foo.in', 'foo.h', 'foo.c', 'foo.o');
+
+# TEST #5: make sure both prefix and suffix patterns work with multiple
+#          target patterns (Savannah bug #26593).
+#
+run_make_test('
+all: foo.s1 foo.s2 p1.foo p2.foo
+
+p1.% p2.%: %.orig
+	@echo $@
+%.s1 %.s2: %.orig
+	@echo $@
+
+.PHONY: foo.orig
+',
+              '', "foo.s1\np1.foo\n");
+
+# TEST 6: Make sure that non-target files are still eligible to be created
+# as part of implicit rule chaining.  Savannah bug #17752.
+
+run_make_test(q!
+BIN = xyz
+COPY = $(BIN).cp
+SRC = $(BIN).c
+allbroken: $(COPY) $(BIN) ; @echo ok
+$(SRC): ; @echo 'main(){}' > $@
+%.cp: % ; @cp $< $@
+% : %.c ; @cp $< $@
+clean: ; @rm -rf $(SRC) $(COPY) $(BIN)
+!,
+              '', "ok\n");
+
+unlink(qw(xyz xyz.cp xyz.c));
+
+# TEST 7: Make sure that all prereqs of all "also_make" targets get created
+# before any of the things that depend on any of them.  Savannah bug #19108.
+
+run_make_test(q!
+final: x ; @echo $@
+x: x.t1 x.t2 ; @echo $@
+x.t2: dep
+dep: ; @echo $@
+%.t1 %.t2: ; @echo $*.t1 ; echo $*.t2
+!,
+              '', "dep\nx.t1\nx.t2\nx\nfinal\n");
+
+
+# TEST 8: Verify we can remove pattern rules.  Savannah bug #18622.
+
+my @f = (qw(foo.w foo.ch));
+touch(@f);
+
+run_make_test(q!
+CWEAVE := :
+
+# Disable builtin rules
+%.tex : %.w
+%.tex : %.w %.ch
+!,
+              'foo.tex',
+              "#MAKE#: *** No rule to make target 'foo.tex'.  Stop.", 512);
+
+unlink(@f);
+
+# TEST #9: Test shortest stem selection in pattern rules.
+
+run_make_test('
+%.x: ;@echo one
+%-mt.x: ;@echo two
+
+all: foo.x foo-mt.x
+',
+'',
+"one\ntwo");
+
+1;
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/quoting b/tests/scripts/features/quoting
new file mode 100644
index 0000000..916681c
--- /dev/null
+++ b/tests/scripts/features/quoting
@@ -0,0 +1,32 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to test using \n" .
+               "quotes within makefiles.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<'EOM';
+SHELL = /bin/sh
+TEXFONTS = NICEFONT
+DEFINES = -DDEFAULT_TFM_PATH=\".:$(TEXFONTS)\"
+test: ; @"echo" 'DEFINES = $(DEFINES)'
+EOM
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+
+# Create the answer to what should be produced by this Makefile
+$answer = 'DEFINES = -DDEFAULT_TFM_PATH=\".:NICEFONT\"' . "\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/features/recursion b/tests/scripts/features/recursion
new file mode 100644
index 0000000..fd5e351
--- /dev/null
+++ b/tests/scripts/features/recursion
@@ -0,0 +1,55 @@
+#                                                                    -*-perl-*-
+$description = "Test recursion.";
+
+$details = "DETAILS";
+
+# Test some basic recursion.
+run_make_test('
+all:
+	$(MAKE) -f #MAKEFILE# foo
+foo:
+	@echo $(MAKE)
+	@echo MAKELEVEL = $(MAKELEVEL)
+	$(MAKE) -f #MAKEFILE# last
+last:
+	@echo $(MAKE)
+	@echo MAKELEVEL = $(MAKELEVEL)
+	@echo THE END
+',
+              ('CFLAGS=-O -w' . ($parallel_jobs ? ' -j 2' : '')),
+              ($vos
+               ? "#MAKE#: Entering directory '#PWD#'
+make 'CFLAGS=-O' -f #MAKEFILE# foo
+make CFLAGS=-O
+MAKELEVEL = 0
+make 'CFLAGS=-O' -f #MAKEFILE# last
+make CFLAGS=-O
+MAKELEVEL = 0
+THE END
+#MAKE#: Leaving directory '#PWD#'"
+               : "#MAKE#: Entering directory '#PWD#'
+#MAKEPATH# -f #MAKEFILE# foo
+#MAKE#[1]: Entering directory '#PWD#'
+#MAKEPATH#
+MAKELEVEL = 1
+#MAKEPATH# -f #MAKEFILE# last
+#MAKE#[2]: Entering directory '#PWD#'
+#MAKEPATH#
+MAKELEVEL = 2
+THE END
+#MAKE#[2]: Leaving directory '#PWD#'
+#MAKE#[1]: Leaving directory '#PWD#'
+#MAKE#: Leaving directory '#PWD#'"));
+
+
+# Test command line overrides.
+run_make_test('
+recur: all ; @$(MAKE) --no-print-directory -f #MAKEFILE# a=AA all
+all: ; @echo "MAKEOVERRIDES = $(MAKEOVERRIDES)"
+',
+              'a=ZZ',
+              'MAKEOVERRIDES = a=ZZ
+MAKEOVERRIDES = a=AA
+');
+
+1;
diff --git a/tests/scripts/features/reinvoke b/tests/scripts/features/reinvoke
new file mode 100644
index 0000000..eb1a349
--- /dev/null
+++ b/tests/scripts/features/reinvoke
@@ -0,0 +1,80 @@
+#                                                              -*-mode: perl-*-
+
+$description = "Test GNU make's auto-reinvocation feature.";
+
+$details = "\
+If the makefile or one it includes can be rebuilt then it is, and make
+is reinvoked.  We create a rule to rebuild the makefile from a temp
+file, then touch the temp file to make it newer than the makefile.";
+
+$omkfile = $makefile;
+
+&utouch(-600, 'incl.mk');
+# For some reason if we don't do this then the test fails for systems
+# with sub-second timestamps, maybe + NFS?  Not sure.
+&utouch(-1, 'incl-1.mk');
+
+run_make_test('
+all: ; @echo running rules.
+
+#MAKEFILE# incl.mk: incl-1.mk
+	@echo rebuilding $@
+	@echo >> $@
+
+include incl.mk',
+              '', "rebuilding incl.mk\nrunning rules.\n");
+
+# Make sure updating the makefile itself also works
+
+&utouch(-600, $omkfile);
+
+run_make_test(undef, '', "rebuilding #MAKEFILE#\nrunning rules.\n");
+
+&rmfiles('incl.mk', 'incl-1.mk');
+
+
+# In this test we create an included file that's out-of-date, but then
+# the rule doesn't update it.  Make shouldn't re-exec.
+
+&utouch(-600, 'b','a');
+#&utouch(-10, 'a');
+&touch('c');
+
+run_make_test('
+SHELL = /bin/sh
+
+all: ; @echo hello
+
+a : b ; echo >> $@
+
+b : c ; [ -f $@ ] || echo >> $@
+
+c: ; echo >> $@
+
+include $(F)',
+              'F=a', "[ -f b ] || echo >> b\nhello\n");
+
+# Now try with the file we're not updating being the actual file we're
+# including: this and the previous one test different parts of the code.
+
+run_make_test(undef, 'F=b', "[ -f b ] || echo >> b\nhello\n")
+
+&rmfiles('a','b','c');
+
+# Ensure command line variables are preserved properly across re-exec
+# Tests for Savannah bug #30723
+
+run_make_test('
+ifdef RECURSE
+-include foo30723
+endif
+recurse: ; @$(MAKE) -f $(MAKEFILE_LIST) RECURSE=1 test
+test: ; @echo F.O=$(F.O)
+foo30723: ; @touch $@
+',
+              '--no-print-directory F.O=bar', "F.O=bar\n");
+
+unlink('foo30723');
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/rule_glob b/tests/scripts/features/rule_glob
new file mode 100644
index 0000000..2d377e7
--- /dev/null
+++ b/tests/scripts/features/rule_glob
@@ -0,0 +1,37 @@
+#                                                                    -*-perl-*-
+
+$description = "Test globbing in targets and prerequisites.";
+
+$details = "";
+
+touch(qw(a.one a.two a.three));
+
+# Test wildcards in regular targets and prerequisites
+run_make_test(q{
+.PHONY: all a.one a.two a.three
+all: a.one* a.t[a-z0-9]o a.th[!q]ee
+a.o[Nn][Ee] a.t*: ; @echo $@
+},
+              '', "a.one\na.two\na.three");
+
+# Test wildcards in pattern targets and prerequisites
+run_make_test(q{
+.PHONY: all
+all: a.four
+%.four : %.t* ; @echo $@: $(sort $^)
+},
+              '', "a.four: a.three a.two");
+
+# Test wildcards in second expansion targets and prerequisites
+run_make_test(q{
+.PHONY: all
+all: a.four
+.SECONDEXPANSION:
+%.four : $$(sort %.t*) ; @echo $@: $(sort $^)
+},
+              '', "a.four: a.three a.two");
+
+unlink(qw(a.one a.two a.three));
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/se_explicit b/tests/scripts/features/se_explicit
new file mode 100644
index 0000000..790017a
--- /dev/null
+++ b/tests/scripts/features/se_explicit
@@ -0,0 +1,167 @@
+#                                                                    -*-perl-*-
+$description = "Test second expansion in ordinary rules.";
+
+$details = "";
+
+# TEST #0: Test handing of '$' in prerequisites with and without second
+# expansion.
+
+# If we don't support archives then the prerequisite is different
+my $prereq = exists $FEATURES{'archives'} ? '$' : '$(PRE)';
+
+run_make_test(q!
+ifdef SE
+  .SECONDEXPANSION:
+endif
+foo$$bar: bar$$baz bar$$biz ; @echo '$@ : $^'
+PRE = one two
+bar$$baz: $$(PRE)
+baraz: $$(PRE)
+PRE = three four
+.DEFAULT: ; @echo '$@'
+!,
+              '',
+              "$prereq\nbar\$biz\nfoo\$bar : bar\$baz bar\$biz");
+
+run_make_test(undef, 'SE=1', "three\nfour\nbariz\nfoo\$bar : baraz bariz");
+
+# TEST #1: automatic variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+foo: bar baz
+
+foo: biz | buz
+
+foo: $$@.1 \
+     $$<.2 \
+     $$(addsuffix .3,$$^) \
+     $$(addsuffix .4,$$+) \
+     $$|.5 \
+     $$*.6
+
+!,
+'',
+'bar
+baz
+biz
+buz
+foo.1
+bar.2
+bar.3
+baz.3
+biz.3
+bar.4
+baz.4
+biz.4
+buz.5
+.6
+');
+
+
+# Test #2: target/pattern -specific variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+foo.x: $$a $$b
+
+foo.x: a := bar
+
+%.x: b := baz
+!,
+'',
+'bar
+baz
+');
+
+
+# Test #3: order of prerequisites.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+all: foo bar baz
+
+# Subtest #1
+foo: foo.1; @:
+foo: foo.2
+foo: foo.3
+
+# Subtest #2
+bar: bar.2
+bar: bar.1; @:
+bar: bar.3
+
+# Subtest #3
+baz: baz.1
+baz: baz.2
+baz: ; @:
+!,
+'',
+'foo.1
+foo.2
+foo.3
+bar.1
+bar.2
+bar.3
+baz.1
+baz.2
+');
+
+# TEST #4: eval in a context where there is no reading_file
+run_make_test(q!
+.SECONDEXPANSION:
+all : $$(eval $$(info test))
+!,
+            '', "test\n#MAKE#: Nothing to be done for 'all'.\n");
+
+# TEST #5: (NEGATIVE) catch eval in a prereq list trying to create new
+# target/prereq relationships.
+
+run_make_test(q!
+.SECONDEXPANSION:
+proj1.exe : proj1.o $$(eval $$(test))
+define test
+proj1.o : proj1.c
+proj1.c: proj1.h
+endef
+!,
+              '', "#MAKE#: *** prerequisites cannot be defined in recipes.  Stop.\n", 512);
+
+
+# Automatic $$+ variable expansion issue.  Savannah bug #25780
+run_make_test(q!
+all : foo foo
+.SECONDEXPANSION:
+all : $$+ ; @echo '$+'
+foo : ;
+!,
+                  '', "foo foo foo foo\n");
+
+
+# Automatic $$+ variable expansion issue.  Savannah bug #25780
+run_make_test(q!
+all : bar bar
+bar : ;
+q%x : ;
+.SECONDEXPANSION:
+a%l: q1x $$+ q2x ; @echo '$+'
+!,
+                  '', "q1x bar bar q2x bar bar\n");
+
+
+# Allow patsubst shorthand in second expansion context.
+# Requires the colon to be quoted.  Savannah bug #16545
+run_make_test(q!
+.PHONY: foo.bar
+.SECONDEXPANSION:
+foo: $$(@\\:%=%.bar); @echo '$^'
+!,
+              '', "foo.bar\n");
+
+1;
diff --git a/tests/scripts/features/se_implicit b/tests/scripts/features/se_implicit
new file mode 100644
index 0000000..ec09d8d
--- /dev/null
+++ b/tests/scripts/features/se_implicit
@@ -0,0 +1,260 @@
+#                                                                    -*-perl-*-
+$description = "Test second expansion in ordinary rules.";
+
+$details = "";
+
+use Cwd;
+
+$dir = cwd;
+$dir =~ s,.*/([^/]+)$,../$1,;
+
+
+# Test #1: automatic variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+foo.a: bar baz
+
+foo.a: biz | buz
+
+foo.%: 1.$$@ \
+       2.$$< \
+       $$(addprefix 3.,$$^) \
+       $$(addprefix 4.,$$+) \
+       5.$$| \
+       6.$$*
+	@:
+
+1.foo.a \
+2.bar \
+3.bar \
+3.baz \
+3.biz \
+4.bar \
+4.baz \
+4.biz \
+5.buz \
+6.a:
+	@echo '$@'
+
+!,
+'',
+'1.foo.a
+2.bar
+3.bar
+3.baz
+3.biz
+4.bar
+4.baz
+4.biz
+5.buz
+6.a
+bar
+baz
+biz
+buz
+');
+
+
+# Test #2: target/pattern -specific variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+foo.x:
+
+foo.%: $$(%_a) $$(%_b) bar
+	@:
+
+foo.x: x_a := bar
+
+%.x: x_b := baz
+
+bar baz: ; @echo '$@'
+!,
+              '', "bar\nbaz\n");
+
+
+# Test #3: order of prerequisites.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+all: foo bar baz
+
+
+# Subtest #1
+#
+%oo: %oo.1; @:
+
+foo: foo.2
+
+foo: foo.3
+
+foo.1: ; @echo '$@'
+
+
+# Subtest #2
+#
+bar: bar.2
+
+%ar: %ar.1; @:
+
+bar: bar.3
+
+bar.1: ; @echo '$@'
+
+
+# Subtest #3
+#
+baz: baz.1
+
+baz: baz.2
+
+%az: ; @:
+!,
+              '',
+'foo.1
+foo.2
+foo.3
+bar.1
+bar.2
+bar.3
+baz.1
+baz.2
+');
+
+
+# Test #4: stem splitting logic.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+$(dir)/tmp/bar.o:
+
+$(dir)/tmp/foo/bar.c: ; @echo '$@'
+$(dir)/tmp/bar/bar.c: ; @echo '$@'
+foo.h: ; @echo '$@'
+
+%.o: $$(addsuffix /%.c,foo bar) foo.h
+	@echo '$@: {$<} $^'
+!,
+              "dir=$dir", "$dir/tmp/foo/bar.c
+$dir/tmp/bar/bar.c
+foo.h
+$dir/tmp/bar.o: {$dir/tmp/foo/bar.c} $dir/tmp/foo/bar.c $dir/tmp/bar/bar.c foo.h
+");
+
+
+# Test #5: stem splitting logic and order-only prerequisites.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+$(dir)/tmp/foo.o: $(dir)/tmp/foo.c
+$(dir)/tmp/foo.c: ; @echo '$@'
+bar.h: ; @echo '$@'
+
+%.o: %.c|bar.h
+	@echo '$@: {$<} {$|} $^'
+
+!,
+              "dir=$dir", "$dir/tmp/foo.c
+bar.h
+$dir/tmp/foo.o: {$dir/tmp/foo.c} {bar.h} $dir/tmp/foo.c
+");
+
+
+# Test #6: lack of implicit prerequisites.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+foo.o: foo.c
+foo.c: ; @echo '$@'
+
+%.o:
+	@echo '$@: {$<} $^'
+!,
+              '', "foo.c\nfoo.o: {foo.c} foo.c\n");
+
+
+# Test #7: Test stem from the middle of the name.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+foobarbaz:
+
+foo%baz: % $$*.1
+	@echo '$*'
+
+bar bar.1:
+	@echo '$@'
+!,
+              '', "bar\nbar.1\nbar\n");
+
+
+# Test #8: Make sure stem triple-expansion does not happen.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+foo$$bar:
+
+f%r: % $$*.1
+	@echo '$*'
+
+oo$$ba oo$$ba.1:
+	@echo '$@'
+!,
+              '', 'oo$ba
+oo$ba.1
+oo$ba
+');
+
+# Test #9: Check the value of $^
+run_make_test(q!
+.SECONDEXPANSION:
+
+%.so: | $$(extra) ; @echo $^
+
+foo.so: extra := foo.o
+foo.so:
+foo.o:
+!,
+              '', "\n");
+
+# Test #10: Test second expansion with second expansion prerequisites
+# Ensures pattern_search() recurses with SE prereqs.
+touch('a');
+run_make_test(q!
+.SECONDEXPANSION:
+sim_base_rgg := just_a_name
+sim_base_src := a
+sim_base_f := a a a
+sim_%.f: $${sim_$$*_f}
+	echo $@
+sim_%.src: $${sim_$$*_src}
+	echo $@
+sim_%: \
+	$$(if $$(sim_$$*_src),sim_%.src) \
+	$$(if $$(sim_$$*_f),sim_%.f) \
+	$$(if $$(sim_$$*_rgg),$$(sim_$$*_rgg).s)
+	echo $@
+!,
+              '-s sim_base', "#MAKE#: *** No rule to make target 'sim_base'.  Stop.", 512);
+
+unlink('a');
+
+# Ensure that order-only tokens embedded in second expansions are parsed
+run_make_test(q!
+.SECONDEXPANSION:
+PREREQS=p1|p2
+P2=p2
+all : foo bar
+f%o: $$(PREREQS) ; @echo '$@' from '$^' and '$|'
+b%r: p1|$$(P2)   ; @echo '$@' from '$^' and '$|'
+p% : ; : $@
+!,
+              "", ": p1\n: p2\nfoo from p1 and p2\nbar from p1 and p2\n");
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/se_statpat b/tests/scripts/features/se_statpat
new file mode 100644
index 0000000..b1e59e1
--- /dev/null
+++ b/tests/scripts/features/se_statpat
@@ -0,0 +1,107 @@
+#                                                                    -*-perl-*-
+$description = "Test second expansion in static pattern rules.";
+
+$details = "";
+
+# Test #1: automatic variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+foo.a foo.b: foo.%: bar.% baz.%
+foo.a foo.b: foo.%: biz.% | buz.%
+
+foo.a foo.b: foo.%: $$@.1 \
+                    $$<.2 \
+                    $$(addsuffix .3,$$^) \
+                    $$(addsuffix .4,$$+) \
+                    $$|.5 \
+                    $$*.6
+!,
+              '', 'bar.a
+baz.a
+biz.a
+buz.a
+foo.a.1
+bar.a.2
+bar.a.3
+baz.a.3
+biz.a.3
+bar.a.4
+baz.a.4
+biz.a.4
+buz.a.5
+a.6
+');
+
+
+# Test #2: target/pattern -specific variables.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+foo.x foo.y: foo.%: $$(%_a) $$($$*_b)
+
+foo.x: x_a := bar
+
+%.x: x_b := baz
+!,
+              '', "bar\nbaz\n");
+
+
+# Test #3: order of prerequisites.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+.DEFAULT: ; @echo '$@'
+
+all: foo.a bar.a baz.a
+
+# Subtest #1
+foo.a foo.b: foo.%: foo.%.1; @:
+foo.a foo.b: foo.%: foo.%.2
+foo.a foo.b: foo.%: foo.%.3
+
+
+# Subtest #2
+bar.a bar.b: bar.%: bar.%.2
+bar.a bar.b: bar.%: bar.%.1; @:
+bar.a bar.b: bar.%: bar.%.3
+
+
+# Subtest #3
+baz.a baz.b: baz.%: baz.%.1
+baz.a baz.b: baz.%: baz.%.2
+baz.a baz.b: ; @:
+!,
+             '', 'foo.a.1
+foo.a.2
+foo.a.3
+bar.a.1
+bar.a.2
+bar.a.3
+baz.a.1
+baz.a.2
+');
+
+
+# Test #4: Make sure stem triple-expansion does not happen.
+#
+run_make_test(q!
+.SECONDEXPANSION:
+foo$$bar: f%r: % $$*.1
+	@echo '$*'
+
+oo$$ba oo$$ba.1:
+	@echo '$@'
+!,
+              '', 'oo$ba
+oo$ba.1
+oo$ba
+');
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/shell_assignment b/tests/scripts/features/shell_assignment
new file mode 100644
index 0000000..686e4bd
--- /dev/null
+++ b/tests/scripts/features/shell_assignment
@@ -0,0 +1,65 @@
+#                                                                    -*-perl-*-
+
+$description = "Test BSD-style shell assignments (VAR != VAL) for variables.";
+
+$details = "";
+
+# TEST 0: Basic shell assignment (!=).
+
+run_make_test('
+.POSIX:
+
+demo1!=printf \'  1   2 3\n4\n\n5 \n \n 6\n\n\n\n\'
+demo2 != printf \'7 8\n \'
+demo3 != printf \'$$(demo2)\'
+demo4 != printf \' 2 3 \n\'
+demo5 != printf \' 2 3 \n\n\'
+all: ; @echo "<$(demo1)> <$(demo2)> <$(demo3)> <$(demo4)> <${demo5}>"
+',
+              '', "<  1   2 3 4  5     6   > <7 8  > <7 8  > < 2 3 > < 2 3  >\n");
+
+# TEST 1: Handle '#' the same way as BSD make
+
+run_make_test('
+foo1!=echo bar#baz
+hash != printf \'\043\'
+foo2!= echo "bar$(hash)baz"
+
+all: ; @echo "<$(foo1)> <$(hash)> <$(foo2)>"
+',
+              '', "<bar> <#> <bar#baz>\n");
+
+# TEST 2: shell assignment variables (from !=) should be recursive.
+# Note that variables are re-evaluated later, so the shell can output
+# a value like $(XYZZY) as part of !=.  The $(XYZZY) will be EVALUATED
+# when the value containing it is evaluated.  On the negative side, this
+# means if you don't want this, you need to escape dollar signs as $$.
+# On the positive side, it means that shell programs can output macros
+# that are then evaluated as they are traditionally evaluated.. and that
+# you can use traditional macro evaluation semantics to implement !=.
+
+run_make_test('
+XYZZY = fiddle-dee-dee
+dollar = $$
+VAR3 != printf \'%s\' \'$(dollar)(XYZZY)\'
+
+all: ; @echo "<$(VAR3)>"
+',
+              '', "<fiddle-dee-dee>\n");
+
+
+# TEST 3: Overrides invoke shell anyway; they just don't store the result
+# in a way that is visible.
+
+run_make_test('
+
+override != echo abc > ,abc ; cat ,abc
+
+all: ; @echo "<$(override)>" ; cat ,abc
+',
+              'override=xyz', "<xyz>\nabc\n");
+
+unlink(',abc');
+
+
+1;
diff --git a/tests/scripts/features/statipattrules b/tests/scripts/features/statipattrules
new file mode 100644
index 0000000..3f363de
--- /dev/null
+++ b/tests/scripts/features/statipattrules
@@ -0,0 +1,111 @@
+#                                                                    -*-perl-*-
+$description = "Test handling of static pattern rules.";
+
+$details = "\
+The makefile created in this test has three targets.  The
+filter command is used to get those target names ending in
+.o and statically creates a compile command with the target
+name and the target name with .c.  It also does the same thing
+for another target filtered with .elc and creates a command
+to emacs a .el file";
+
+&touch('bar.c', 'lose.c');
+
+#   TEST #0
+#   -------
+
+run_make_test('
+files = foo.elc bar.o lose.o
+
+$(filter %.o,$(files)): %.o: %.c ; @echo CC -c $(CFLAGS) $< -o $@
+
+$(filter %.elc,$(files)): %.elc: %.el ; @echo emacs $<
+',
+              '',
+              'CC -c bar.c -o bar.o');
+
+#  TEST #1
+#  -------
+
+run_make_test(undef, 'lose.o', 'CC -c lose.c -o lose.o');
+
+
+#   TEST #2
+#   -------
+&touch("foo.el");
+
+run_make_test(undef, 'foo.elc', 'emacs foo.el');
+
+# Clean up after the first tests.
+unlink('foo.el', 'bar.c', 'lose.c');
+
+
+# TEST #3 -- PR/1670: don't core dump on invalid static pattern rules
+# -------
+
+run_make_test('
+.DEFAULT: ; @echo $@
+foo: foo%: % %.x % % % y.% % ; @echo $@
+',
+              '', ".x\ny.\nfoo");
+
+
+# TEST #4 -- bug #12180: core dump on a stat pattern rule with an empty
+#                        prerequisite list.
+run_make_test('
+foo.x bar.x: %.x : ; @echo $@
+
+',
+              '', 'foo.x');
+
+
+# TEST #5 -- bug #13881: double colon static pattern rule does not
+#                        substitute %.
+run_make_test('
+foo.bar:: %.bar: %.baz
+foo.baz: ;@:
+',
+              '', '');
+
+
+# TEST #6: make sure the second stem does not overwrite the first
+#          perprerequisite's stem (Savannah bug #16053).
+#
+run_make_test('
+all.foo.bar: %.foo.bar: %.one
+
+all.foo.bar: %.bar: %.two
+
+all.foo.bar:
+	@echo $*
+	@echo $^
+
+.DEFAULT:;@:
+',
+'',
+'all.foo
+all.one all.foo.two');
+
+
+# TEST #7: make sure the second stem does not overwrite the first
+#          perprerequisite's stem when second expansion is enabled
+#          (Savannah bug #16053).
+#
+run_make_test('
+.SECONDEXPANSION:
+
+all.foo.bar: %.foo.bar: %.one $$*-one
+
+all.foo.bar: %.bar: %.two $$*-two
+
+all.foo.bar:
+	@echo $*
+	@echo $^
+
+.DEFAULT:;@:
+',
+'',
+'all.foo
+all.one all-one all.foo.two all.foo-two');
+
+1;
diff --git a/tests/scripts/features/targetvars b/tests/scripts/features/targetvars
new file mode 100644
index 0000000..a9b8dbe
--- /dev/null
+++ b/tests/scripts/features/targetvars
@@ -0,0 +1,273 @@
+#                                                                    -*-perl-*-
+$description = "Test target-specific variable settings.";
+
+$details = "\
+Create a makefile containing various flavors of target-specific variable
+values, override and non-override, and using various variable expansion
+rules, semicolon interference, etc.";
+
+run_make_test('
+SHELL = /bin/sh
+export FOO = foo
+export BAR = bar
+one: override FOO = one
+one two: ; @echo $(FOO) $(BAR)
+two: BAR = two
+three: ; BAR=1000
+	@echo $(FOO) $(BAR)
+# Some things that shouldn not be target vars
+funk : override
+funk : override adelic
+adelic override : ; echo $@
+# Test per-target recursive variables
+four:FOO=x
+four:VAR$(FOO)=ok
+four: ; @echo "$(FOO) $(VAR$(FOO)) $(VAR) $(VARx)"
+five:FOO=x
+five six : VAR$(FOO)=good
+five six: ;@echo "$(FOO) $(VAR$(FOO)) $(VAR) $(VARx) $(VARfoo)"
+# Test per-target variable inheritance
+seven: eight
+seven eight: ; @echo $@: $(FOO) $(BAR)
+seven: BAR = seven
+seven: FOO = seven
+eight: BAR = eight
+# Test the export keyword with per-target variables
+nine: ; @echo $(FOO) $(BAR) $$FOO $$BAR
+nine: FOO = wallace
+nine-a: export BAZ = baz
+nine-a: ; @echo $$BAZ
+# Test = escaping
+EQ = =
+ten: one$(EQ)two
+ten: one $(EQ) two
+ten one$(EQ)two $(EQ):;@echo $@
+.PHONY: one two three four five six seven eight nine ten $(EQ) one$(EQ)two
+# Test target-specific vars with pattern/suffix rules
+QVAR = qvar
+RVAR = =
+%.q : ; @echo $(QVAR) $(RVAR)
+foo.q : RVAR += rvar
+# Target-specific vars with multiple LHS pattern rules
+%.r %.s %.t: ; @echo $(QVAR) $(RVAR) $(SVAR) $(TVAR)
+foo.r : RVAR += rvar
+foo.t : TVAR := $(QVAR)
+',
+                 "one two three", "one bar\nfoo two\nBAR=1000\nfoo bar\n");
+
+# TEST #2
+
+run_make_test(undef, "one two FOO=1 BAR=2", "one 2\n1 2\n");
+
+# TEST #3
+
+run_make_test(undef, "four", "x ok  ok\n");
+
+# TEST #4
+
+run_make_test(undef, "seven", "eight: seven eight\nseven: seven seven\n");
+
+# TEST #5
+
+run_make_test(undef, "nine", "wallace bar wallace bar\n");
+
+# TEST #5-a
+
+run_make_test(undef, "nine-a", "baz\n");
+
+# TEST #6
+
+run_make_test(undef, "ten", "one=two\none bar\n=\nfoo two\nten\n");
+
+# TEST #6
+
+run_make_test(undef, "foo.q bar.q", "qvar = rvar\nqvar =\n");
+
+# TEST #7
+
+run_make_test(undef, "foo.t bar.s", "qvar = qvar\nqvar =\n");
+
+
+# TEST #8
+# For PR/1378: Target-specific vars don't inherit correctly
+
+run_make_test('
+foo: FOO = foo
+bar: BAR = bar
+foo: bar
+bar: baz
+baz: ; @echo $(FOO) $(BAR)
+', "", "foo bar\n");
+
+# TEST #9
+# For PR/1380: Using += assignment in target-specific variables sometimes fails
+# Also PR/1831
+
+run_make_test('
+.PHONY: all one
+all: FOO += baz
+all: one; @echo $(FOO)
+
+FOO = bar
+
+one: FOO += biz
+one: FOO += boz
+one: ; @echo $(FOO)
+',
+              '', "bar baz biz boz\nbar baz\n");
+
+# Test #10
+
+run_make_test(undef, 'one', "bar biz boz\n");
+
+# Test #11
+# PR/1709: Test semicolons in target-specific variable values
+
+run_make_test('
+foo : FOO = ; ok
+foo : ; @echo "$(FOO)"
+',
+              '', "; ok\n");
+
+# Test #12
+# PR/2020: More hassles with += target-specific vars.  I _really_ think
+# I nailed it this time :-/.
+
+run_make_test('
+.PHONY: a
+
+BLAH := foo
+COMMAND = echo $(BLAH)
+
+a: ; @$(COMMAND)
+
+a: BLAH := bar
+a: COMMAND += snafu $(BLAH)
+',
+              '', "bar snafu bar\n");
+
+# Test #13
+# Test double-colon rules with target-specific variable values
+
+run_make_test('
+W = bad
+X = bad
+foo: W = ok
+foo:: ; @echo $(W) $(X) $(Y) $(Z)
+foo:: ; @echo $(W) $(X) $(Y) $(Z)
+foo: X = ok
+
+Y = foo
+bar: foo
+bar: Y = bar
+
+Z = nopat
+ifdef PATTERN
+  fo% : Z = pat
+endif
+',
+             'foo', "ok ok foo nopat\nok ok foo nopat\n");
+
+# Test #14
+# Test double-colon rules with target-specific variable values and
+# inheritance
+
+run_make_test(undef, 'bar', "ok ok bar nopat\nok ok bar nopat\n");
+
+# Test #15
+# Test double-colon rules with pattern-specific variable values
+
+run_make_test(undef, 'foo PATTERN=yes', "ok ok foo pat\nok ok foo pat\n");
+
+# Test #16
+# Test target-specific variables with very long command line
+# (> make default buffer length)
+
+run_make_test('
+base_metals_fmd_reports.sun5 base_metals_fmd_reports CreateRealPositions        CreateMarginFunds deals_changed_since : BUILD_OBJ=$(shell if [ -f               "build_information.generate" ]; then echo "$(OBJ_DIR)/build_information.o"; else echo "no build information"; fi  )
+
+deals_changed_since: ; @echo $(BUILD_OBJ)
+',
+              '', "no build information\n");
+
+# TEST #17
+
+# Test a merge of set_lists for files, where one list is much longer
+# than the other.  See Savannah bug #15757.
+
+mkdir('t1', 0777);
+touch('t1/rules.mk');
+
+run_make_test('
+VPATH = t1
+include rules.mk
+.PHONY: all
+all: foo.x
+foo.x : rules.mk ; @echo MYVAR=$(MYVAR) FOOVAR=$(FOOVAR) ALLVAR=$(ALLVAR)
+all: ALLVAR = xxx
+foo.x: FOOVAR = bar
+rules.mk : MYVAR = foo
+.INTERMEDIATE: foo.x rules.mk
+',
+              '-I t1', 'MYVAR= FOOVAR=bar ALLVAR=xxx');
+
+rmfiles('t1/rules.mk');
+rmdir('t1');
+
+# TEST #18
+
+# Test appending to a simple variable containing a "$": avoid a
+# double-expansion.  See Savannah bug #15913.
+
+run_make_test('
+VAR := $$FOO
+foo: VAR += BAR
+foo: ; @echo '."'".'$(VAR)'."'".'
+',
+              '', '$FOO BAR');
+
+# TEST #19: Override with append variables
+
+run_make_test('
+a: override FOO += f1
+a: FOO += f2
+a: ; @echo "$(FOO)"
+',
+              '', "f1\n");
+
+run_make_test(undef, 'FOO=C', "C f1\n");
+
+# TEST #19: Conditional variables with command-line settings
+
+run_make_test('
+a: FOO ?= f1
+a: ; @echo "$(FOO)"
+',
+              '', "f1\n");
+
+run_make_test(undef, 'FOO=C', "C\n");
+
+# TEST #20: Check for continuation after semicolons
+
+run_make_test(q!
+a: A = 'hello;\
+world'
+a: ; @echo $(A)
+!,
+              '', "hello; world\n");
+
+# TEST #19: Test define/endef variables as target-specific vars
+
+# run_make_test('
+# define b
+# @echo global
+# endef
+# a: define b
+# @echo local
+# endef
+
+# a: ; $(b)
+# ',
+#               '', "local\n");
+
+1;
diff --git a/tests/scripts/features/utf8 b/tests/scripts/features/utf8
new file mode 100644
index 0000000..54bc471
--- /dev/null
+++ b/tests/scripts/features/utf8
@@ -0,0 +1,11 @@
+#                                                                    -*-perl-*-
+
+$description = "Test support for UTF-8.";
+
+$details = "";
+
+# Verify that the UTF-8 BOM is ignored.
+run_make_test("\xEF\xBB\xBFall: ; \@echo \$\@\n", '', "all");
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/features/varnesting b/tests/scripts/features/varnesting
new file mode 100644
index 0000000..d8f3ffb
--- /dev/null
+++ b/tests/scripts/features/varnesting
@@ -0,0 +1,35 @@
+#                                                                    -*-perl-*-
+$description = "Test recursive variables";
+
+$details = "";
+
+run_make_test('
+x = variable1
+variable2 := Hello
+y = $(subst 1,2,$(x))
+z = y
+a := $($($(z)))
+all: 
+	@echo $(a)
+',
+              '', "Hello\n");
+
+# This tests resetting the value of a variable while expanding it.
+# You may only see problems with this if you're using valgrind or
+# some other memory checker that poisons freed memory.
+# See Savannah patch #7534
+
+run_make_test('
+VARIABLE = $(eval VARIABLE := echo hi)$(VARIABLE)
+wololo:
+	@$(VARIABLE)
+',
+              '', "hi\n");
+
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/features/vpath b/tests/scripts/features/vpath
new file mode 100644
index 0000000..ec24165
--- /dev/null
+++ b/tests/scripts/features/vpath
@@ -0,0 +1,81 @@
+#                                                                     -*-perl-*-
+
+$description = "The following test creates a makefile to test the \n"
+              ."vpath directive which allows you to specify a search \n"
+              ."path for a particular class of filenames, those that\n"
+              ."match a particular pattern.";
+
+$details = "This tests the vpath directive by specifying search directories\n"
+         ."for one class of filenames with the form: vpath pattern directories"
+         ."\nIn this test, we specify the working directory for all files\n"
+         ."that end in c or h.  We also test the variables $@ (which gives\n"
+         ."target name) and $^ (which is a list of all dependencies \n"
+         ."including the directories in which they were found).  It also\n"
+         ."uses the function firstword used to extract just the first\n"
+         ."dependency from the entire list.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "vpath %.c foo\n";
+print MAKEFILE "vpath %.c $workdir\n";
+print MAKEFILE "vpath %.h $workdir\n";
+print MAKEFILE "objects = main.o kbd.o commands.o display.o insert.o\n";
+print MAKEFILE "edit:  \$(objects)\n";
+print MAKEFILE "\t\@echo cc -o \$@ \$^\n";
+print MAKEFILE "main.o : main.c defs.h\n";
+print MAKEFILE "\t\@echo cc -c \$(firstword \$^)\n";
+print MAKEFILE "kbd.o : kbd.c defs.h command.h\n";
+print MAKEFILE "\t\@echo cc -c kbd.c\n";
+print MAKEFILE "commands.o : command.c defs.h command.h\n";
+print MAKEFILE "\t\@echo cc -c commands.c\n";
+print MAKEFILE "display.o : display.c defs.h buffer.h\n";
+print MAKEFILE "\t\@echo cc -c display.c\n";
+print MAKEFILE "insert.o : insert.c defs.h buffer.h\n";
+print MAKEFILE "\t\@echo cc -c insert.c\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+@files_to_touch = ("$workdir${pathsep}main.c","$workdir${pathsep}defs.h",
+               "$workdir${pathsep}kbd.c","$workdir${pathsep}command.h",
+               "$workdir${pathsep}commands.c","$workdir${pathsep}display.c",
+               "$workdir${pathsep}buffer.h","$workdir${pathsep}insert.c",
+	       "$workdir${pathsep}command.c");
+
+&touch(@files_to_touch);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "cc -c $workdir${pathsep}main.c\ncc -c kbd.c\ncc -c commands.c\n"
+         ."cc -c display.c\n"
+         ."cc -c insert.c\ncc -o edit main.o kbd.o commands.o display.o "
+         ."insert.o\n";
+
+if (&compare_output($answer,&get_logfile(1)))
+{
+  unlink @files_to_touch;
+}
+
+# TEST 2: after vpath lookup ensure we don't get incorrect circular dependency
+# warnings due to change of struct file ptr.  Savannah bug #13529.
+
+mkdir('vpath-d', 0777);
+
+run_make_test(q!
+vpath %.te vpath-d/
+.SECONDARY:
+default: vpath-d/a vpath-d/b
+vpath-d/a: fail.te
+vpath-d/b : fail.te
+vpath-d/fail.te:
+!,
+              '', "#MAKE#: Nothing to be done for 'default'.\n");
+
+rmdir('vpath-d');
+
+1;
diff --git a/tests/scripts/features/vpath2 b/tests/scripts/features/vpath2
new file mode 100644
index 0000000..7e970a7
--- /dev/null
+++ b/tests/scripts/features/vpath2
@@ -0,0 +1,45 @@
+$description = "This is part 2 in a series to test the vpath directive\n"
+              ."It tests the three forms of the directive:\n"
+              ."     vpath pattern directive\n"
+              ."     vpath pattern  (clears path associated with pattern)\n"
+              ."     vpath          (clears all paths specified with vpath)\n";
+
+$details = "This test simply adds many search paths using various vpath\n"
+          ."directive forms and clears them afterwards.  It has a simple\n"
+          ."rule to print a message at the end to confirm that the makefile\n"
+          ."ran with no errors.\n";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "VPATH = $workdir:$sourcedir\n";
+print MAKEFILE "vpath %.c foo\n";
+print MAKEFILE "vpath %.c $workdir\n";
+print MAKEFILE "vpath %.c $sourcedir\n";
+print MAKEFILE "vpath %.h $workdir\n";
+print MAKEFILE "vpath %.c\n";
+print MAKEFILE "vpath\n";
+print MAKEFILE "all:\n";
+print MAKEFILE "\t\@echo ALL IS WELL\n";
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "ALL IS WELL\n";
+
+&compare_output($answer,&get_logfile(1));
+
+1;
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/features/vpath3 b/tests/scripts/features/vpath3
new file mode 100644
index 0000000..c6ede28
--- /dev/null
+++ b/tests/scripts/features/vpath3
@@ -0,0 +1,35 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the interaction of the -lfoo feature and vpath";
+$details = "";
+
+my @dirs_to_make = qw(a1 b1 a2 b2 b3);
+for my $d (@dirs_to_make) {
+    mkdir($d, 0777);
+}
+
+my @files_to_touch = ("a1${pathsep}lib1.a",
+                      "a1${pathsep}libc.a",
+                      "b1${pathsep}lib1.so",
+                      "a2${pathsep}lib2.a",
+                      "b2${pathsep}lib2.so",
+                      "lib3.a",
+                      "b3${pathsep}lib3.so");
+&touch(@files_to_touch);
+
+run_make_test('
+vpath %.h b3
+vpath %.a a1
+vpath %.so b1
+vpath % a2 b2
+vpath % b3
+all: -l1 -lc -l2 -l3; @echo $^
+',
+              '', "a1${pathsep}lib1.a a1${pathsep}libc.a a2${pathsep}lib2.a lib3.a\n");
+
+unlink(@files_to_touch);
+for my $d (@dirs_to_make) {
+    rmdir($d);
+}
+
+1;
diff --git a/tests/scripts/features/vpathgpath b/tests/scripts/features/vpathgpath
new file mode 100644
index 0000000..5e6217b
--- /dev/null
+++ b/tests/scripts/features/vpathgpath
@@ -0,0 +1,66 @@
+#                                                                    -*-perl-*-
+$description = "Tests VPATH+/GPATH functionality.";
+
+$details = "";
+
+$VP = "$workdir$pathsep";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "VPATH = $VP\n";
+
+print MAKEFILE <<'EOMAKE';
+
+GPATH = $(VPATH)
+
+.SUFFIXES: .a .b .c .d
+.PHONY: general rename notarget intermediate
+
+%.a:
+%.b:
+%.c:
+%.d:
+
+%.a : %.b ; cat $^ > $@
+%.b : %.c ; cat $^ > $@
+%.c :: %.d ; cat $^ > $@
+
+# General testing info:
+
+general: foo.b
+foo.b: foo.c bar.c
+
+EOMAKE
+
+close(MAKEFILE);
+
+@touchedfiles = ();
+
+$off = -500;
+
+sub touchfiles {
+  foreach (@_) {
+    ($f = $_) =~ s,VP/,$VP,g;
+    &utouch($off, $f);
+    $off += 10;
+    push(@touchedfiles, $f);
+  }
+}
+
+# Run the general-case test
+
+&touchfiles("VP/foo.d", "VP/bar.d", "VP/foo.c", "VP/bar.c", "foo.b", "bar.d");
+
+&run_make_with_options($makefile,"general",&get_logfile());
+
+push(@touchedfiles, "bar.c");
+
+$answer = "$make_name: Nothing to be done for 'general'.\n";
+
+&compare_output($answer,&get_logfile(1));
+
+unlink(@touchedfiles) unless $keep;
+
+1;
diff --git a/tests/scripts/features/vpathplus b/tests/scripts/features/vpathplus
new file mode 100644
index 0000000..361788c
--- /dev/null
+++ b/tests/scripts/features/vpathplus
@@ -0,0 +1,129 @@
+#                                                                    -*-perl-*-
+$description = "Tests the new VPATH+ functionality added in 3.76.";
+
+$details = "";
+
+$VP = "$workdir$pathsep";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "VPATH = $VP\n";
+
+print MAKEFILE <<'EOMAKE';
+
+SHELL = /bin/sh
+
+.SUFFIXES: .a .b .c .d
+.PHONY: general rename notarget intermediate
+
+%.a:
+%.b:
+%.c:
+%.d:
+
+%.a : %.b
+	cat $^ > $@
+%.b : %.c
+	cat $^ > $@ 2>/dev/null || exit 1
+%.c :: %.d
+	cat $^ > $@
+
+# General testing info:
+
+general: foo.b
+foo.b: foo.c bar.c
+
+# Rename testing info:
+
+rename: $(VPATH)/foo.c foo.d
+
+# Target not made testing info:
+
+notarget: notarget.b
+notarget.c: notarget.d
+	-@echo "not creating $@ from $^"
+
+# Intermediate files:
+
+intermediate: inter.a
+
+EOMAKE
+
+close(MAKEFILE);
+
+@touchedfiles = ();
+
+$off = -500;
+
+sub touchfiles {
+  foreach (@_) {
+    &utouch($off, $_);
+    $off += 10;
+    push(@touchedfiles, $_);
+  }
+}
+
+# Run the general-case test
+
+&touchfiles("$VP/foo.d", "$VP/bar.d", "$VP/foo.c", "$VP/bar.c", "foo.b", "bar.d");
+
+&run_make_with_options($makefile,"general",&get_logfile);
+
+push(@touchedfiles, "bar.c");
+
+$answer = "cat bar.d > bar.c
+cat ${VP}foo.c bar.c > foo.b 2>/dev/null || exit 1
+";
+&compare_output($answer,&get_logfile(1));
+
+# Test rules that don't make the target correctly
+
+&touchfiles("$VP/notarget.c", "notarget.b", "notarget.d");
+
+&run_make_with_options($makefile,"notarget",&get_logfile,512);
+
+$answer = "not creating notarget.c from notarget.d
+cat notarget.c > notarget.b 2>/dev/null || exit 1
+$makefile:16: recipe for target 'notarget.b' failed
+$make_name: *** [notarget.b] Error 1
+";
+
+&compare_output($answer,&get_logfile(1));
+
+# Test intermediate file handling (part 1)
+
+&touchfiles("$VP/inter.d");
+
+&run_make_with_options($makefile,"intermediate",&get_logfile);
+
+push(@touchedfiles, "inter.a", "inter.b");
+
+$answer = "cat ${VP}inter.d > inter.c
+cat inter.c > inter.b 2>/dev/null || exit 1
+cat inter.b > inter.a
+rm inter.b inter.c
+";
+&compare_output($answer,&get_logfile(1));
+
+# Test intermediate file handling (part 2)
+
+&utouch(-20, "inter.a");
+&utouch(-10, "$VP/inter.b");
+&touch("$VP/inter.d");
+
+push(@touchedfiles, "$VP/inter.b", "$VP/inter.d");
+
+&run_make_with_options($makefile,"intermediate",&get_logfile);
+
+$answer = "cat ${VP}inter.d > inter.c
+cat inter.c > inter.b 2>/dev/null || exit 1
+cat inter.b > inter.a
+rm inter.c
+";
+&compare_output($answer,&get_logfile(1));
+
+unlink @touchedfiles unless $keep;
+
+1;
diff --git a/tests/scripts/functions/abspath b/tests/scripts/functions/abspath
new file mode 100644
index 0000000..84c30ab
--- /dev/null
+++ b/tests/scripts/functions/abspath
@@ -0,0 +1,81 @@
+#                                                                    -*-perl-*-
+$description = "Test the abspath functions.";
+
+$details = "";
+
+run_make_test('
+ifneq ($(realpath $(abspath .)),$(CURDIR))
+  $(warning .: abs="$(abspath .)" real="$(realpath $(abspath .))" curdir="$(CURDIR)")
+endif
+
+ifneq ($(realpath $(abspath ./)),$(CURDIR))
+  $(warning ./: abs="$(abspath ./)" real="$(realpath $(abspath ./))" curdir="$(CURDIR)")
+endif
+
+ifneq ($(realpath $(abspath .///)),$(CURDIR))
+  $(warning .///: abs="$(abspath .///)" real="$(realpath $(abspath .///))" curdir="$(CURDIR)")
+endif
+
+ifneq ($(abspath /),/)
+  $(warning /: abspath="$(abspath /)")
+endif
+
+ifneq ($(abspath ///),/)
+  $(warning ///: abspath="$(abspath ///)")
+endif
+
+ifneq ($(abspath /.),/)
+  $(warning /.: abspath="$(abspath /.)")
+endif
+
+ifneq ($(abspath ///.),/)
+  $(warning ///.: abspath="$(abspath ///.)")
+endif
+
+ifneq ($(abspath /./),/)
+  $(warning /./: abspath="$(abspath /./)")
+endif
+
+ifneq ($(abspath /.///),/)
+  $(warning /.///: abspath="$(abspath /.///)")
+endif
+
+ifneq ($(abspath /..),/)
+  $(warning /..: abspath="$(abspath /..)")
+endif
+
+ifneq ($(abspath ///..),/)
+  $(warning ///..: abspath="$(abspath ///..)")
+endif
+
+ifneq ($(abspath /../),/)
+  $(warning /../: abspath="$(abspath /../)")
+endif
+
+ifneq ($(abspath /..///),/)
+  $(warning /..///: abspath="$(abspath /..///)")
+endif
+
+
+ifneq ($(abspath /foo/bar/..),/foo)
+  $(warning /foo/bar/..: abspath="$(abspath /foo/bar/..)")
+endif
+
+ifneq ($(abspath /foo/bar/../../../baz),/baz)
+  $(warning /foo/bar/../../../baz: abspath="$(abspath /foo/bar/../../../baz)")
+endif
+
+ifneq ($(abspath /foo/bar/../ /..),/foo /)
+  $(warning /foo/bar/../ /..: abspath="$(abspath /foo/bar/../ /..)")
+endif
+
+
+.PHONY: all
+all: ; @:
+',
+'',
+'');
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/functions/addprefix b/tests/scripts/functions/addprefix
new file mode 100644
index 0000000..1845552
--- /dev/null
+++ b/tests/scripts/functions/addprefix
@@ -0,0 +1,44 @@
+$description = "The following test creates a makefile to test the addprefix "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(addprefix src${pathsep},a.b.z.foo hacks) \n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "src${pathsep}a.b.z.foo src${pathsep}hacks\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/addsuffix b/tests/scripts/functions/addsuffix
new file mode 100644
index 0000000..da4fbb7
--- /dev/null
+++ b/tests/scripts/functions/addsuffix
@@ -0,0 +1,36 @@
+#                                                                    -*-perl-*-
+$description = "Test the addsuffix function.";
+
+$details = "";
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<EOMAKE;
+string := \$(addsuffix .c,src${pathsep}a.b.z.foo hacks)
+one: ; \@echo \$(string)
+
+two: ; \@echo \$(addsuffix foo,)
+EOMAKE
+
+close(MAKEFILE);
+
+
+# TEST 0
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "src${pathsep}a.b.z.foo.c hacks.c\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST 1
+
+&run_make_with_options($makefile, "two", &get_logfile);
+$answer = "\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/functions/andor b/tests/scripts/functions/andor
new file mode 100644
index 0000000..62e0c2e
--- /dev/null
+++ b/tests/scripts/functions/andor
@@ -0,0 +1,50 @@
+#                                                                    -*-perl-*-
+$description = "Test the and & or functions.\n";
+
+$details = "Try various uses of and & or to ensure they all give the correct
+results.\n";
+
+# TEST #0
+# For $(and ...), it will either be empty or the last value
+run_make_test('
+NEQ = $(subst $1,,$2)
+f =
+t = true
+
+all:
+	@echo 1 $(and    ,$t)
+	@echo 2 $(and $t)
+	@echo 3 $(and $t,)
+	@echo 4 $(and z,true,$f,false)
+	@echo 5 $(and $t,$f,$(info bad short-circuit))
+	@echo 6 $(and $(call NEQ,a,b),true)
+	@echo 7 $(and $(call NEQ,a,a),true)
+	@echo 8 $(and z,true,fal,se) hi
+	@echo 9 $(and ,true,fal,se)there
+	@echo 10 $(and   $(e) ,$t)',
+              '',
+              "1\n2 true\n3\n4\n5\n6 true\n7\n8 se hi\n9 there\n10\n");
+
+# TEST #1
+# For $(or ...), it will either be empty or the first true value
+run_make_test('
+NEQ = $(subst $1,,$2)
+f =
+t = true
+
+all:
+	@echo 1 $(or    ,    )
+	@echo 2 $(or $t)
+	@echo 3 $(or ,$t)
+	@echo 4 $(or z,true,$f,false)
+	@echo 5 $(or $t,$(info bad short-circuit))
+	@echo 6 $(or $(info short-circuit),$t)
+	@echo 7 $(or $(call NEQ,a,b),true)
+	@echo 8 $(or $(call NEQ,a,a),true)
+	@echo 9 $(or z,true,fal,se) hi
+	@echo 10 $(or ,true,fal,se)there
+	@echo 11 $(or   $(e) ,$f)',
+              '',
+              "short-circuit\n1\n2 true\n3 true\n4 z\n5 true\n6 true\n7 b\n8 true\n9 z hi\n10 truethere\n11\n");
+
+1;
diff --git a/tests/scripts/functions/basename b/tests/scripts/functions/basename
new file mode 100644
index 0000000..08f2ea5
--- /dev/null
+++ b/tests/scripts/functions/basename
@@ -0,0 +1,44 @@
+$description = "The following test creates a makefile to test the suffix "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(basename src${pathsep}a.b.z.foo.c src${pathsep}hacks src.bar${pathsep}a.b.z.foo.c src.bar${pathsep}hacks hacks) \n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "src${pathsep}a.b.z.foo src${pathsep}hacks src.bar${pathsep}a.b.z.foo src.bar${pathsep}hacks hacks\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/call b/tests/scripts/functions/call
new file mode 100644
index 0000000..9db9da7
--- /dev/null
+++ b/tests/scripts/functions/call
@@ -0,0 +1,110 @@
+#                                                                    -*-perl-*-
+$description = "Test the call function.\n";
+
+$details = "Try various uses of call and ensure they all give the correct
+results.\n";
+
+open(MAKEFILE, "> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<'EOMAKE';
+# Simple, just reverse two things
+#
+reverse = $2 $1
+
+# A complex 'map' function, using recursive 'call'.
+#
+map = $(foreach a,$2,$(call $1,$a))
+
+# Test using a builtin; this is silly as it's simpler to do without call
+#
+my-notdir = $(call notdir,$(1))
+
+# Test using non-expanded builtins
+#
+my-foreach = $(foreach $(1),$(2),$(3))
+my-if      = $(if $(1),$(2),$(3))
+
+# Test recursive invocations of call with different arguments
+#
+one = $(1) $(2) $(3)
+two = $(call one,$(1),foo,$(2))
+
+# Test recursion on the user-defined function.  As a special case make
+# won't error due to this.
+# Implement transitive closure using $(call ...)
+#
+DEP_foo = bar baz quux
+DEP_baz = quux blarp
+rest = $(wordlist 2,$(words ${1}),${1})
+tclose = $(if $1,$(firstword $1)\
+		$(call tclose,$(sort ${DEP_$(firstword $1)} $(call rest,$1))))
+
+all: ; @echo '$(call reverse,bar,foo)'; \
+        echo '$(call map,origin,MAKE reverse map)'; \
+        echo '$(call my-notdir,a/b   c/d      e/f)'; \
+        echo '$(call my-foreach)'; \
+        echo '$(call my-foreach,a,,,)'; \
+        echo '$(call my-if,a,b,c)'; \
+        echo '$(call two,bar,baz)'; \
+	echo '$(call tclose,foo)'
+
+
+
+EOMAKE
+
+# These won't work until/unless PR/1527 is resolved.
+#        echo '$(call my-foreach,a,x y z,$(a)$(a))'; \
+#        echo '$(call my-if,,$(warning don't print this),ok)'
+#
+# $answer = "xx yy zz\nok\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "foo bar\ndefault file file\nb d f\n\n\nb\nbar foo baz\nfoo bar baz blarp quux \n";
+&compare_output($answer, &get_logfile(1));
+
+
+# TEST eclipsing of arguments when invoking sub-calls
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile2");
+
+print MAKEFILE <<'EOF';
+
+all = $1 $2 $3 $4 $5 $6 $7 $8 $9
+
+level1 = $(call all,$1,$2,$3,$4,$5)
+level2 = $(call level1,$1,$2,$3)
+level3 = $(call level2,$1,$2,$3,$4,$5)
+
+all:
+	@echo $(call all,1,2,3,4,5,6,7,8,9,10,11)
+	@echo $(call level1,1,2,3,4,5,6,7,8)
+	@echo $(call level2,1,2,3,4,5,6,7,8)
+	@echo $(call level3,1,2,3,4,5,6,7,8)
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, "", &get_logfile);
+$answer = "1 2 3 4 5 6 7 8 9\n1 2 3 4 5\n1 2 3\n1 2 3\n";
+&compare_output($answer,&get_logfile(1));
+
+# Ensure that variables are defined in global scope even in a $(call ...)
+
+delete $ENV{X123};
+
+run_make_test('
+tst = $(eval export X123)
+$(call tst)
+all: ; @echo "$${X123-not set}"
+',
+              '', "\n");
+
+1;
diff --git a/tests/scripts/functions/dir b/tests/scripts/functions/dir
new file mode 100644
index 0000000..f48fb8c
--- /dev/null
+++ b/tests/scripts/functions/dir
@@ -0,0 +1,44 @@
+$description = "The following test creates a makefile to test the dir "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(dir src${pathsep}foo.c hacks) \n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "src${pathsep} .${pathsep}\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/error b/tests/scripts/functions/error
new file mode 100644
index 0000000..0d61177
--- /dev/null
+++ b/tests/scripts/functions/error
@@ -0,0 +1,73 @@
+#                                                                    -*-Perl-*-
+
+$description = "\
+The following test creates a makefile to test the error function.";
+
+$details = "";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE 'err = $(error Error found!)
+
+ifdef ERROR1
+$(error error is $(ERROR1))
+endif
+
+ifdef ERROR2
+$(error error is $(ERROR2))
+endif
+
+ifdef ERROR3
+all: some; @echo $(error error is $(ERROR3))
+endif
+
+ifdef ERROR4
+all: some; @echo error is $(ERROR4)
+	@echo $(error error is $(ERROR4))
+endif
+
+some: ; @echo Some stuff
+
+testvar: ; @: $(err)
+';
+
+close(MAKEFILE);
+
+# Test #1
+
+&run_make_with_options($makefile, "ERROR1=yes", &get_logfile, 512);
+$answer = "$makefile:4: *** error is yes.  Stop.\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #2
+
+&run_make_with_options($makefile, "ERROR2=no", &get_logfile, 512);
+$answer = "$makefile:8: *** error is no.  Stop.\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #3
+
+&run_make_with_options($makefile, "ERROR3=maybe", &get_logfile, 512);
+$answer = "Some stuff\n$makefile:12: *** error is maybe.  Stop.\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #4
+
+&run_make_with_options($makefile, "ERROR4=definitely", &get_logfile, 512);
+$answer = "Some stuff\n$makefile:16: *** error is definitely.  Stop.\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #5
+
+&run_make_with_options($makefile, "testvar", &get_logfile, 512);
+$answer = "$makefile:22: *** Error found!.  Stop.\n";
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/eval b/tests/scripts/functions/eval
new file mode 100644
index 0000000..90513bd
--- /dev/null
+++ b/tests/scripts/functions/eval
@@ -0,0 +1,169 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the eval function.";
+
+$details = "This is a test of the eval function in GNU make.
+This function will evaluate inline makefile syntax and incorporate the
+results into its internal database.\n";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+define Y
+  all:: ; @echo $AA
+  A = B
+endef
+
+X = $(eval $(value Y))
+
+$(eval $(shell echo A = A))
+$(eval $(Y))
+$(eval A = C)
+$(eval $(X))
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile, "", &get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "AA\nBA\n";
+
+&compare_output($answer,&get_logfile(1));
+
+# Test to make sure defining variables when we have extra scope pushed works
+# as expected.
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile2");
+
+print MAKEFILE <<'EOF';
+VARS = A B
+
+VARSET = $(1) = $(2)
+
+$(foreach v,$(VARS),$(eval $(call VARSET,$v,$v)))
+
+all: ; @echo A = $(A) B = $(B)
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, "", &get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "A = A B = B\n";
+
+&compare_output($answer,&get_logfile(1));
+
+# Test to make sure eval'ing inside conditionals works properly
+
+$makefile3 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile3");
+
+print MAKEFILE <<'EOF';
+FOO = foo
+
+all:: ; @echo it
+
+define Y
+  all:: ; @echo worked
+endef
+
+ifdef BAR
+$(eval $(Y))
+endif
+
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile3, "", &get_logfile);
+$answer = "it\n";
+&compare_output($answer,&get_logfile(1));
+
+&run_make_with_options($makefile3, "BAR=1", &get_logfile);
+$answer = "it\nworked\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST very recursive invocation of eval
+
+$makefile3 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile3");
+
+print MAKEFILE <<'EOF';
+..9 := 0 1 2 3 4 5 6 7 8 9
+rev=$(eval res:=)$(foreach word,$1,$(eval res:=${word} ${res}))${res}
+a:=$(call rev,${..9})
+all: ; @echo '[$(a)]'
+
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile3, "", &get_logfile);
+$answer = "[         9 8 7 6 5 4 3 2 1 0 ]\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST eval with no filename context.
+# The trick here is that because EVAR is taken from the environment, it must
+# be evaluated before every command is invoked.  Make sure that works, when
+# we have no file context for reading_file (bug # 6195)
+
+$makefile4 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile4");
+
+print MAKEFILE <<'EOF';
+EVAR = $(eval FOBAR = 1)
+all: ; @echo "OK"
+
+EOF
+
+close(MAKEFILE);
+
+$extraENV{EVAR} = '1';
+&run_make_with_options($makefile4, "", &get_logfile);
+$answer = "OK\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# Clean out previous information to allow new run_make_test() interface.
+# If we ever convert all the above to run_make_test() we can remove this line.
+$makefile = undef;
+
+# Test handling of backslashes in strings to be evaled.
+
+run_make_test('
+define FOO
+all: ; @echo hello \
+world
+endef
+$(eval $(FOO))
+', '', 'hello world');
+
+run_make_test('
+define FOO
+all: ; @echo '."'".'he\llo'."'".'
+	@echo world
+endef
+$(eval $(FOO))
+', '', 'he\llo
+world');
+
+
+# We don't allow new target/prerequisite relationships to be defined within a
+# command script, because these are evaluated after snap_deps() and that
+# causes lots of problems (like core dumps!)
+# See Savannah bug # 12124.
+
+run_make_test('deps: ; $(eval deps: foo)', '',
+              '#MAKEFILE#:1: *** prerequisites cannot be defined in recipes.  Stop.',
+              512);
+
+1;
diff --git a/tests/scripts/functions/file b/tests/scripts/functions/file
new file mode 100644
index 0000000..55eb58a
--- /dev/null
+++ b/tests/scripts/functions/file
@@ -0,0 +1,118 @@
+#                                                                    -*-perl-*-
+
+$description = 'Test the $(file ...) function.';
+
+# Test > and >>
+run_make_test(q!
+define A
+a
+b
+endef
+B = c d
+$(file >file.out,$(A))
+$(foreach L,$(B),$(file >>     file.out,$L))
+x:;@echo hi; cat file.out
+!,
+              '', "hi\na\nb\nc\nd");
+
+unlink('file.out');
+
+# Test >> to a non-existent file
+run_make_test(q!
+define A
+a
+b
+endef
+$(file     >>     file.out,$(A))
+x:;@cat file.out
+!,
+              '', "a\nb");
+
+unlink('file.out');
+
+# Test > with no content
+run_make_test(q!
+$(file >4touch)
+.PHONY:x
+x:;@cat 4touch
+!,
+              '', '');
+
+# Test >> with no content
+run_make_test(q!
+$(file >>4touch)
+.PHONY:x
+x:;@cat 4touch
+!,
+              '', '');
+unlink('4touch');
+
+# Test > to a read-only file
+touch('file.out');
+chmod(0444, 'file.out');
+
+# Find the error that will be printed
+# This seems complicated, but we need the message from the C locale
+my $loc = undef;
+if ($has_POSIX) {
+    $loc = POSIX::setlocale(POSIX::LC_MESSAGES);
+    POSIX::setlocale(POSIX::LC_MESSAGES, 'C');
+}
+my $e;
+open(my $F, '>', 'file.out') and die "Opened read-only file!\n";
+$e = "$!";
+$loc and POSIX::setlocale(POSIX::LC_MESSAGES, $loc);
+
+run_make_test(q!
+define A
+a
+b
+endef
+$(file     >     file.out,$(A))
+x:;@cat file.out
+!,
+              '', "#MAKEFILE#:6: *** open: file.out: $e.  Stop.",
+              512);
+
+unlink('file.out');
+
+# Use variables for operator and filename
+run_make_test(q!
+define A
+a
+b
+endef
+OP = >
+FN = file.out
+$(file     $(OP)     $(FN),$(A))
+x:;@cat file.out
+!,
+              '', "a\nb");
+
+unlink('file.out');
+
+# Don't add newlines if one already exists
+run_make_test(q!
+define A
+a
+b
+
+endef
+$(file >file.out,$(A))
+x:;@cat file.out
+!,
+              '', "a\nb");
+
+unlink('file.out');
+
+# Empty text
+run_make_test(q!
+$(file >file.out,)
+$(file >>file.out,)
+x:;@cat file.out
+!,
+              '', "\n\n");
+
+unlink('file.out');
+
+1;
diff --git a/tests/scripts/functions/filter-out b/tests/scripts/functions/filter-out
new file mode 100644
index 0000000..1fe4819
--- /dev/null
+++ b/tests/scripts/functions/filter-out
@@ -0,0 +1,42 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the filter and filter-out functions.";
+
+$details = "The makefile created in this test has two variables.  The
+filter-out function is first used to discard names ending in
+.o with a single simple pattern.  The second filter-out function
+augments the simple pattern with three literal names, which are
+also added to the text argument.  This tests an internal hash table
+which is only used if there are multiple literals present in both
+the pattern and text arguments.  The result of both filter-out
+functions is the same single .elc name.\n";
+
+# Basic test -- filter
+run_make_test(q!
+files1 := $(filter %.o, foo.elc bar.o lose.o)
+files2 := $(filter %.o foo.i, foo.i bar.i lose.i foo.elc bar.o lose.o)
+all: ; @echo '$(files1) $(files2)'
+!,
+              '', "bar.o lose.o foo.i bar.o lose.o\n");
+
+# Basic test -- filter-out
+run_make_test(q!
+files1 := $(filter-out %.o, foo.elc bar.o lose.o)
+files2 := $(filter-out foo.i bar.i lose.i %.o, foo.i bar.i lose.i foo.elc bar.o lose.o)
+all: ; @echo '$(files1) $(files2)'
+!,
+              '', "foo.elc foo.elc\n");
+
+# Escaped patterns
+run_make_test(q!all:;@echo '$(filter foo\%bar,foo%bar fooXbar)'!,
+              '', "foo%bar\n");
+
+run_make_test(q!all:;@echo '$(filter foo\%\%\\\\\%\%bar,foo%%\\%%bar fooX\\Ybar)'!,
+              '', "foo%%\\%%bar\n");
+
+run_make_test(q!
+X = $(filter foo\\\\\%bar,foo\%bar foo\Xbar)
+all:;@echo '$(X)'!,
+              '', "foo\\%bar\n");
+
+1;
diff --git a/tests/scripts/functions/findstring b/tests/scripts/functions/findstring
new file mode 100644
index 0000000..48abede
--- /dev/null
+++ b/tests/scripts/functions/findstring
@@ -0,0 +1,47 @@
+$description = "The following test creates a makefile to test the findstring "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(findstring port, reporter)\n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,
+                       "",
+                       &get_logfile,
+                       0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "port\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/flavor b/tests/scripts/functions/flavor
new file mode 100644
index 0000000..80d6be7
--- /dev/null
+++ b/tests/scripts/functions/flavor
@@ -0,0 +1,44 @@
+#                                                                    -*-perl-*-
+$description = "Test the flavor function.";
+
+$details = "";
+
+
+# Test #1: Test general logic.
+#
+run_make_test('
+s := s
+r = r
+
+$(info u $(flavor u))
+$(info s $(flavor s))
+$(info r $(flavor r))
+
+ra += ra
+rc ?= rc
+
+$(info ra $(flavor ra))
+$(info rc $(flavor rc))
+
+s += s
+r += r
+
+$(info s $(flavor s))
+$(info r $(flavor r))
+
+
+.PHONY: all
+all:;@:
+',
+'',
+'u undefined
+s simple
+r recursive
+ra recursive
+rc recursive
+s simple
+r recursive');
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/functions/foreach b/tests/scripts/functions/foreach
new file mode 100644
index 0000000..4d1a11d
--- /dev/null
+++ b/tests/scripts/functions/foreach
@@ -0,0 +1,77 @@
+#                                                                    -*-perl-*-
+# $Id$
+
+$description = "Test the foreach function.";
+
+$details = "This is a test of the foreach function in gnu make.
+This function starts with a space separated list of
+names and a variable. Each name in the list is subsituted
+into the variable and the given text evaluated. The general
+form of the command is $(foreach var,$list,$text). Several
+types of foreach loops are tested\n";
+
+
+# TEST 0
+
+# Set an environment variable that we can test in the makefile.
+$extraENV{FOOFOO} = 'foo foo';
+
+run_make_test("space = ' '".'
+null :=
+auto_var = udef space CC null FOOFOO MAKE foo CFLAGS WHITE @ <
+foo = bletch null @ garf
+av = $(foreach var, $(auto_var), $(origin $(var)) )
+override WHITE := BLACK
+for_var = $(addsuffix .c,foo $(null) $(foo) $(space) $(av) )
+fe = $(foreach var2, $(for_var),$(subst .c,.o, $(var2) ) )
+all: auto for2
+auto : ; @echo $(av)
+for2: ; @echo $(fe)',
+              '-e WHITE=WHITE CFLAGS=',
+              "undefined file default file environment default file command line override automatic automatic
+foo.o bletch.o null.o @.o garf.o .o    .o undefined.o file.o default.o file.o environment.o default.o file.o command.o line.o override.o automatic.o automatic.o");
+
+delete $extraENV{FOOFOO};
+
+# TEST 1: Test that foreach variables take precedence over global
+# variables in a global scope (like inside an eval).  Tests bug #11913
+
+run_make_test('
+.PHONY: all target
+all: target
+
+x := BAD
+
+define mktarget
+target: x := $(x)
+target: ; @echo "$(x)"
+endef
+
+x := GLOBAL
+
+$(foreach x,FOREACH,$(eval $(value mktarget)))',
+              '',
+              'FOREACH');
+
+
+# TEST 2: Check some error conditions.
+
+run_make_test('
+x = $(foreach )
+y = $x
+
+all: ; @echo $y',
+              '',
+              "#MAKEFILE#:2: *** insufficient number of arguments (1) to function 'foreach'.  Stop.",
+              512);
+
+run_make_test('
+x = $(foreach )
+y := $x
+
+all: ; @echo $y',
+              '',
+              "#MAKEFILE#:2: *** insufficient number of arguments (1) to function 'foreach'.  Stop.",
+              512);
+
+1;
diff --git a/tests/scripts/functions/guile b/tests/scripts/functions/guile
new file mode 100644
index 0000000..c63bec9
--- /dev/null
+++ b/tests/scripts/functions/guile
@@ -0,0 +1,99 @@
+#                                                                    -*-perl-*-
+
+$description = 'Test the $(guile ...) function.';
+
+$details = 'This only works on systems that support it.';
+
+# If this instance of make doesn't support GNU Guile, skip it
+# This detects if guile is loaded using the "load" directive
+# $makefile = get_tmpfile();
+# open(MAKEFILE, "> $makefile") || die "Failed to open $makefile: $!\n";
+# print MAKEFILE q!
+# -load guile
+# all: ; @echo $(filter guile,$(.LOADED))
+# !;
+# close(MAKEFILE) || die "Failed to write $makefile: $!\n";
+# $cmd = subst_make_string("#MAKEPATH# -f $makefile");
+# $log = get_logfile(0);
+# $code = run_command_with_output($log, $cmd);
+# read_file_into_string ($log) eq "guile\n" and $FEATURES{guile} = 1;
+
+# If we don't have Guile support, never mind.
+exists $FEATURES{guile} or return -1;
+
+# Verify simple data type conversions
+# Currently we don't support vectors:
+#    echo '$(guile (vector 1 2 3))'; \
+run_make_test(q!
+x:;@echo '$(guile #f)'; \
+    echo '$(guile #t)'; \
+    echo '$(guile #\c)'; \
+    echo '$(guile 1234)'; \
+    echo '$(guile 'foo)'; \
+    echo '$(guile "bar")'; \
+    echo '$(guile (cons 'a 'b))'; \
+    echo '$(guile '(a b (c . d) 1 (2) 3))'
+!,
+              '', "\n#t\nc\n1234\nfoo\nbar\na b\na b c d 1 2 3");
+
+# Verify the gmk-expand function
+run_make_test(q!
+VAR = $(guile (gmk-expand "$(shell echo hi)"))
+x:;@echo '$(VAR)'
+!,
+              '', "hi");
+
+# Verify the gmk-eval function
+# Prove that the string is expanded only once (by eval)
+run_make_test(q!
+TEST = bye
+EVAL = VAR = $(TEST) $(shell echo there)
+$(guile (gmk-eval "$(value EVAL)"))
+TEST = hi
+x:;@echo '$(VAR)'
+!,
+              '', "hi there");
+
+# Verify the gmk-eval function with a list
+run_make_test(q!
+$(guile (gmk-eval '(VAR = 1 (2) () 3)))
+x:;@echo '$(VAR)'
+!,
+              '', "1 2 3");
+
+# Verify the gmk-var function
+run_make_test(q!
+VALUE = hi $(shell echo there)
+VAR = $(guile (gmk-var "VALUE"))
+x:;@echo '$(VAR)'
+!,
+              '', "hi there");
+
+# Verify the gmk-var function with a symbol
+run_make_test(q!
+VALUE = hi $(shell echo there)
+VAR = $(guile (gmk-var 'VALUE))
+x:;@echo '$(VAR)'
+!,
+              '', "hi there");
+
+# Write a Guile program using define and run it
+run_make_test(q!
+# Define the "fib" function in Guile
+define fib
+;; A procedure for counting the n:th Fibonacci number
+;; See SICP, p. 37
+(define (fib n)
+  (cond ((= n 0) 0)
+        ((= n 1) 1)
+        (else (+ (fib (- n 1))
+                 (fib (- n 2))))))
+endef
+$(guile $(fib))
+
+# Now run it
+x:;@echo $(guile (fib $(FIB)))
+!,
+              'FIB=10', "55");
+
+1;
diff --git a/tests/scripts/functions/if b/tests/scripts/functions/if
new file mode 100644
index 0000000..8604e4f
--- /dev/null
+++ b/tests/scripts/functions/if
@@ -0,0 +1,33 @@
+#                                                                    -*-perl-*-
+$description = "Test the if function.\n";
+
+$details = "Try various uses of if and ensure they all give the correct
+results.\n";
+
+open(MAKEFILE, "> $makefile");
+
+print MAKEFILE <<EOMAKE;
+NEQ = \$(subst \$1,,\$2)
+e =
+
+all:
+\t\@echo 1 \$(if    ,true,false)
+\t\@echo 2 \$(if ,true,)
+\t\@echo 3 \$(if ,true)
+\t\@echo 4 \$(if z,true,false)
+\t\@echo 5 \$(if z,true,\$(shell echo hi))
+\t\@echo 6 \$(if ,\$(shell echo hi),false)
+\t\@echo 7 \$(if \$(call NEQ,a,b),true,false)
+\t\@echo 8 \$(if \$(call NEQ,a,a),true,false)
+\t\@echo 9 \$(if z,true,fal,se) hi
+\t\@echo 10 \$(if ,true,fal,se)there
+\t\@echo 11 \$(if \$(e) ,true,false)
+EOMAKE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "1 false\n2\n3\n4 true\n5 true\n6 false\n7 true\n8 false\n9 true hi\n10 fal,sethere\n11 false\n";
+&compare_output($answer, &get_logfile(1));
+
+1;
diff --git a/tests/scripts/functions/join b/tests/scripts/functions/join
new file mode 100644
index 0000000..302c307
--- /dev/null
+++ b/tests/scripts/functions/join
@@ -0,0 +1,44 @@
+$description = "The following test creates a makefile to test the join "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(join a b c,foo      hacks .pl1) \n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "afoo bhacks c.pl1\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/notdir b/tests/scripts/functions/notdir
new file mode 100644
index 0000000..4ed8f9c
--- /dev/null
+++ b/tests/scripts/functions/notdir
@@ -0,0 +1,44 @@
+$description = "The following test creates a makefile to test the notdir "
+              ."function.";
+
+$details = "";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string := \$(notdir ${pathsep}src${pathsep}foo.c hacks) \n"
+              ."all: \n"
+              ."\t\@echo \$(string) \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "foo.c hacks\n";
+
+# COMPARE RESULTS
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/origin b/tests/scripts/functions/origin
new file mode 100644
index 0000000..f7b7eb8
--- /dev/null
+++ b/tests/scripts/functions/origin
@@ -0,0 +1,51 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the origin function.";
+
+$details = "This is a test of the origin function in gnu make.
+This function will report on where a variable was
+defined per the following list:
+
+'undefined'            never defined
+'default'              default definition
+'environment'          environment var without -e
+'environment override' environment var with    -e
+'file'                 defined in makefile
+'command line'         defined on the command line
+'override'             defined by override in makefile
+'automatic'            Automatic variable\n";
+
+# Set an environment variable
+$extraENV{MAKETEST} = 1;
+
+run_make_test('
+foo := bletch garf
+auto_var = undefined CC MAKETEST MAKE foo CFLAGS WHITE @
+av = $(foreach var, $(auto_var), $(origin $(var)) )
+override WHITE := BLACK
+all: auto
+	@echo $(origin undefined)
+	@echo $(origin CC)
+	@echo $(origin MAKETEST)
+	@echo $(origin MAKE)
+	@echo $(origin foo)
+	@echo $(origin CFLAGS)
+	@echo $(origin WHITE)
+	@echo $(origin @)
+auto :
+	@echo $(av)',
+	      '-e WHITE=WHITE CFLAGS=',
+	      'undefined default environment default file command line override automatic
+undefined
+default
+environment
+default
+file
+command line
+override
+automatic');
+
+# Reset an environment variable
+delete $extraENV{MAKETEST};
+
+1;
diff --git a/tests/scripts/functions/realpath b/tests/scripts/functions/realpath
new file mode 100644
index 0000000..9b503b4
--- /dev/null
+++ b/tests/scripts/functions/realpath
@@ -0,0 +1,82 @@
+#                                                                    -*-perl-*-
+$description = "Test the realpath functions.";
+
+$details = "";
+
+run_make_test('
+ifneq ($(realpath .),$(CURDIR))
+  $(error )
+endif
+
+ifneq ($(realpath ./),$(CURDIR))
+  $(error )
+endif
+
+ifneq ($(realpath .///),$(CURDIR))
+  $(error )
+endif
+
+ifneq ($(realpath /),/)
+  $(error )
+endif
+
+ifneq ($(realpath /.),/)
+  $(error )
+endif
+
+ifneq ($(realpath /./),/)
+  $(error )
+endif
+
+ifneq ($(realpath /.///),/)
+  $(error )
+endif
+
+ifneq ($(realpath /..),/)
+  $(error )
+endif
+
+ifneq ($(realpath /../),/)
+  $(error )
+endif
+
+ifneq ($(realpath /..///),/)
+  $(error )
+endif
+
+ifneq ($(realpath . /..),$(CURDIR) /)
+  $(error )
+endif
+
+.PHONY: all
+all: ; @:
+',
+              '',
+              '');
+
+# On Windows platforms, "//" means something special.  So, don't do these
+# tests there.
+
+if ($port_type ne 'W32') {
+  run_make_test('
+ifneq ($(realpath ///),/)
+  $(error )
+endif
+
+ifneq ($(realpath ///.),/)
+  $(error )
+endif
+
+ifneq ($(realpath ///..),/)
+  $(error )
+endif
+
+.PHONY: all
+all: ; @:',
+                '',
+                '');
+}
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/functions/shell b/tests/scripts/functions/shell
new file mode 100644
index 0000000..723cd0e
--- /dev/null
+++ b/tests/scripts/functions/shell
@@ -0,0 +1,32 @@
+#                                                                    -*-perl-*-
+
+$description = 'Test the $(shell ...) function.';
+
+$details = '';
+
+
+# Test shells inside rules.
+run_make_test('.PHONY: all
+all: ; @echo $(shell echo hi)
+','','hi');
+
+
+# Test unescaped comment characters in shells.  Savannah bug #20513
+if ($all_tests) {
+    run_make_test(q!
+FOO := $(shell echo '#')
+foo: ; echo '$(FOO)'
+!,
+              '', "#\n");
+}
+
+# Test shells inside exported environment variables.
+# This is the test that fails if we try to put make exported variables into
+# the environment for a $(shell ...) call.
+run_make_test('
+export HI = $(shell echo hi)
+.PHONY: all
+all: ; @echo $$HI
+','','hi');
+
+1;
diff --git a/tests/scripts/functions/sort b/tests/scripts/functions/sort
new file mode 100644
index 0000000..b558910
--- /dev/null
+++ b/tests/scripts/functions/sort
@@ -0,0 +1,47 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to verify
+the ability of make to sort lists of object. Sort
+will also remove any duplicate entries. This will also
+be tested.";
+
+$details = "The make file is built with a list of object in a random order
+and includes some duplicates. Make should sort all of the elements
+remove all duplicates\n";
+
+run_make_test('
+foo := moon_light days
+foo1:= jazz
+bar := captured 
+bar2 = boy end, has rise A midnight 
+bar3:= $(foo)
+s1  := _by
+s2  := _and_a
+t1  := $(addsuffix $(s1), $(bar) )
+t2  := $(addsuffix $(s2), $(foo1) )
+t3  := $(t2) $(t2) $(t2) $(t2) $(t2) $(t2) $(t2) $(t2) $(t2) $(t2) 
+t4  := $(t3) $(t3) $(t3) $(t3) $(t3) $(t3) $(t3) $(t3) $(t3) $(t3) 
+t5  := $(t4) $(t4) $(t4) $(t4) $(t4) $(t4) $(t4) $(t4) $(t4) $(t4) 
+t6  := $(t5) $(t5) $(t5) $(t5) $(t5) $(t5) $(t5) $(t5) $(t5) $(t5) 
+t7  := $(t6) $(t6) $(t6) 
+p1  := $(addprefix $(foo1), $(s2) )
+blank:= 
+all:
+	@echo $(sort $(bar2) $(foo)  $(addsuffix $(s1), $(bar) ) $(t2) $(bar2) $(bar3))
+	@echo $(sort $(blank) $(foo) $(bar2) $(t1) $(p1) )
+	@echo $(sort $(foo) $(bar2) $(t1) $(t4) $(t5) $(t7) $(t6) )
+',
+              '', 'A boy captured_by days end, has jazz_and_a midnight moon_light rise
+A boy captured_by days end, has jazz_and_a midnight moon_light rise
+A boy captured_by days end, has jazz_and_a midnight moon_light rise
+');
+
+
+# Test with non-space/tab whitespace.  Note that you can't see the
+# original bug except using valgrind.
+
+run_make_test("FOO = a b\tc\rd\fe \f \f \f \f \ff
+all: ; \@echo \$(words \$(sort \$(FOO)))\n",
+              '', "5\n");
+
+1;
diff --git a/tests/scripts/functions/strip b/tests/scripts/functions/strip
new file mode 100644
index 0000000..8222433
--- /dev/null
+++ b/tests/scripts/functions/strip
@@ -0,0 +1,57 @@
+#                                                                    -*-perl-*-
+$description = "The following test creates a makefile to verify
+the ability of make to strip white space from lists of object.\n";
+
+
+$details = "The make file is built with a list of objects that contain white space
+These are then run through the strip command to remove it. This is then
+verified by echoing the result.\n";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<'EOMAKE';
+TEST1 := "Is this TERMINAL fun?                                                               What makes you believe is this terminal fun?                                                                                                                                               JAPAN is a WONDERFUL planet -- I wonder if we will ever reach                                         their level of COMPARATIVE SHOPPING..."
+E :=
+TEST2 := $E   try this     and		this     	$E
+
+define TEST3
+
+and these	        test out
+
+
+some
+blank lines
+
+
+
+endef
+
+.PHONY: all
+all:
+	@echo '$(strip  $(TEST1) )'
+	@echo '$(strip  $(TEST2) )'
+	@echo '$(strip  $(TEST3) )'
+
+space: ; @echo '$(strip ) $(strip  	   )'
+
+EOMAKE
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile);
+$answer = "\"Is this TERMINAL fun? What makes you believe is this terminal fun? JAPAN is a WONDERFUL planet -- I wonder if we will ever reach their level of COMPARATIVE SHOPPING...\"
+try this and this
+and these test out some blank lines
+";
+&compare_output($answer,&get_logfile(1));
+
+
+&run_make_with_options($makefile,"space",&get_logfile);
+$answer = " \n";
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/functions/substitution b/tests/scripts/functions/substitution
new file mode 100644
index 0000000..0d2f6a2
--- /dev/null
+++ b/tests/scripts/functions/substitution
@@ -0,0 +1,38 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the subst and patsubst functions";
+
+$details = "";
+
+# Generic patsubst test: test both the function and variable form.
+
+run_make_test('
+foo := a.o b.o c.o
+bar := $(foo:.o=.c)
+bar2:= $(foo:%.o=%.c)
+bar3:= $(patsubst %.c,%.o,x.c.c bar.c)
+all:;@echo $(bar); echo $(bar2); echo $(bar3)',
+'',
+'a.c b.c c.c
+a.c b.c c.c
+x.c.o bar.o');
+
+# Patsubst without '%'--shouldn't match because the whole word has to match
+# in patsubst.  Based on a bug report by Markus Mauhart <qwe123@chello.at>
+
+run_make_test('all:;@echo $(patsubst Foo,Repl,FooFoo)', '', 'FooFoo');
+
+# Variable subst where a pattern matches multiple times in a single word.
+# Based on a bug report by Markus Mauhart <qwe123@chello.at>
+
+run_make_test('
+A := fooBARfooBARfoo
+all:;@echo $(A:fooBARfoo=REPL)', '', 'fooBARREPL');
+
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/suffix b/tests/scripts/functions/suffix
new file mode 100644
index 0000000..0c4f919
--- /dev/null
+++ b/tests/scripts/functions/suffix
@@ -0,0 +1,57 @@
+$description = "The following test creates a makefile to test the suffix\n"
+              ."function. \n";
+
+$details = "The suffix function will return the string following the last _._\n"
+          ."the list provided. It will provide all of the unique suffixes found\n"
+          ."in the list. The long strings are sorted to remove duplicates.\n";
+
+# IF YOU NEED >1 MAKEFILE FOR THIS TEST, USE &get_tmpfile; TO GET
+# THE NAME OF THE MAKEFILE.  THIS INSURES CONSISTENCY AND KEEPS TRACK OF
+# HOW MANY MAKEFILES EXIST FOR EASY DELETION AT THE END.
+# EXAMPLE: $makefile2 = &get_tmpfile;
+
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "string  := word.pl general_test2.pl1 FORCE.pl word.pl3 generic_test.perl /tmp.c/bar foo.baz/bar.c MAKEFILES_variable.c\n"
+              ."string2 := \$(string) \$(string) \$(string) \$(string) \$(string) \$(string) \$(string)\n"
+              ."string3 := \$(string2) \$(string2) \$(string2) \$(string2) \$(string2) \$(string2) \$(string2)\n"
+              ."string4 := \$(string3) \$(string3) \$(string3) \$(string3) \$(string3) \$(string3) \$(string3)\n"
+              ."all: \n"
+              ."\t\@echo \$(suffix \$(string)) \n"
+              ."\t\@echo \$(sort \$(suffix \$(string4))) \n"
+              ."\t\@echo \$(suffix \$(string) a.out) \n"
+              ."\t\@echo \$(sort \$(suffix \$(string3))) \n";
+
+
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+
+# COMPARE RESULTS
+$answer = ".pl .pl1 .pl .pl3 .perl .c .c\n"
+         .".c .perl .pl .pl1 .pl3\n"
+         .".pl .pl1 .pl .pl3 .perl .c .c .out\n"
+         .".c .perl .pl .pl1 .pl3\n";
+
+# In this call to compare output, you should use the call &get_logfile(1)
+# to send the name of the last logfile created.  You may also use
+# the special call &get_logfile(1) which returns the same as &get_logfile(1).
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/value b/tests/scripts/functions/value
new file mode 100644
index 0000000..8e1a6f0
--- /dev/null
+++ b/tests/scripts/functions/value
@@ -0,0 +1,30 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the value function.";
+
+$details = "This is a test of the value function in GNU make.
+This function will evaluate to the value of the named variable with no
+further expansion performed on it.\n";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+export FOO = foo
+
+recurse = FOO = $FOO
+static := FOO = $(value FOO)
+
+all: ; @echo $(recurse) $(value recurse) $(static) $(value static)
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile, "", &get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "FOO = OO FOO = foo FOO = foo FOO = foo\n";
+
+
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/functions/warning b/tests/scripts/functions/warning
new file mode 100644
index 0000000..cd452d4
--- /dev/null
+++ b/tests/scripts/functions/warning
@@ -0,0 +1,65 @@
+#                                                                    -*-Perl-*-
+
+$description = "\
+The following test creates a makefile to test the warning function.";
+
+$details = "";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+ifdef WARNING1
+$(warning warning is $(WARNING1))
+endif
+
+ifdef WARNING2
+$(warning warning is $(WARNING2))
+endif
+
+ifdef WARNING3
+all: some; @echo hi $(warning warning is $(WARNING3))
+endif
+
+ifdef WARNING4
+all: some; @echo hi
+	@echo there $(warning warning is $(WARNING4))
+endif
+
+some: ; @echo Some stuff
+
+EOF
+
+close(MAKEFILE);
+
+# Test #1
+
+&run_make_with_options($makefile, "WARNING1=yes", &get_logfile, 0);
+$answer = "$makefile:2: warning is yes\nSome stuff\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #2
+
+&run_make_with_options($makefile, "WARNING2=no", &get_logfile, 0);
+$answer = "$makefile:6: warning is no\nSome stuff\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #3
+
+&run_make_with_options($makefile, "WARNING3=maybe", &get_logfile, 0);
+$answer = "Some stuff\n$makefile:10: warning is maybe\nhi\n";
+&compare_output($answer,&get_logfile(1));
+
+# Test #4
+
+&run_make_with_options($makefile, "WARNING4=definitely", &get_logfile, 0);
+$answer = "Some stuff\n$makefile:14: warning is definitely\nhi\nthere\n";
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/functions/wildcard b/tests/scripts/functions/wildcard
new file mode 100644
index 0000000..bcd84ad
--- /dev/null
+++ b/tests/scripts/functions/wildcard
@@ -0,0 +1,103 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to test wildcard
+expansions and the ability to put a command on the same
+line as the target name separated by a semi-colon.";
+
+$details = "\
+This test creates 4 files by the names of 1.example,
+two.example and 3.example.  We execute three tests.  The first
+executes the print1 target which tests the '*' wildcard by
+echoing all filenames by the name of '*.example'.  The second
+test echo's all files which match '?.example' and
+[a-z0-9].example.  Lastly we clean up all of the files using
+the '*' wildcard as in the first test";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<EOM;
+.PHONY: print1 print2 clean
+print1: ;\@echo \$(sort \$(wildcard example.*))
+print2:
+\t\@echo \$(sort \$(wildcard example.?))
+\t\@echo \$(sort \$(wildcard example.[a-z0-9]))
+\t\@echo \$(sort \$(wildcard example.[!A-Za-z_\\!]))
+clean:
+\t$delete_command \$(sort \$(wildcard example.*))
+EOM
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch("example.1");
+&touch("example.two");
+&touch("example.3");
+&touch("example.for");
+&touch("example._");
+
+# TEST #1
+# -------
+
+$answer = "example.1 example.3 example._ example.for example.two\n";
+
+&run_make_with_options($makefile,"print1",&get_logfile);
+
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #2
+# -------
+
+$answer = "example.1 example.3 example._\n"
+         ."example.1 example.3\n"
+         ."example.1 example.3\n";
+
+&run_make_with_options($makefile,"print2",&get_logfile);
+
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #3
+# -------
+
+$answer = "$delete_command example.1 example.3 example._ example.for example.two";
+if ($vos)
+{
+   $answer .= " \n";
+}
+else
+{
+   $answer .= "\n";
+}
+
+&run_make_with_options($makefile,"clean",&get_logfile);
+
+if ((-f "example.1")||(-f "example.two")||(-f "example.3")||(-f "example.for")) {
+   $test_passed = 0;
+}
+
+&compare_output($answer,&get_logfile(1));
+
+# TEST #4: Verify that failed wildcards don't return the pattern
+
+run_make_test(q!
+all: ; @echo $(wildcard xz--y*.7)
+!,
+              '', "\n");
+
+# TEST #5: wildcard used to verify file existence
+
+touch('xxx.yyy');
+
+run_make_test(q!exists: ; @echo file=$(wildcard xxx.yyy)!,
+              '', "file=xxx.yyy\n");
+
+unlink('xxx.yyy');
+
+run_make_test(q!exists: ; @echo file=$(wildcard xxx.yyy)!,
+              '', "file=\n");
+
+1;
diff --git a/tests/scripts/functions/word b/tests/scripts/functions/word
new file mode 100644
index 0000000..4dcc940
--- /dev/null
+++ b/tests/scripts/functions/word
@@ -0,0 +1,167 @@
+#                                                                    -*-perl-*-
+$description = "\
+Test the word, words, wordlist, firstword, and lastword functions.\n";
+
+$details = "\
+Produce a variable with a large number of words in it,
+determine the number of words, and then read each one back.\n";
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE <<'EOF';
+string  := word.pl general_test2.pl   FORCE.pl word.pl generic_test.perl MAKEFILES_variable.pl
+string2 := $(string) $(string) $(string) $(string) $(string) $(string) $(string)
+string3 := $(string2) $(string2) $(string2) $(string2) $(string2) $(string2) $(string2)
+string4 := $(string3) $(string3) $(string3) $(string3) $(string3) $(string3) $(string3)
+all:
+	@echo $(words $(string))
+	@echo $(words $(string4))
+	@echo $(word 1, $(string))
+	@echo $(word 100, $(string))
+	@echo $(word 1, $(string))
+	@echo $(word 1000, $(string3))
+	@echo $(wordlist 3, 4, $(string))
+	@echo $(wordlist 4, 3, $(string))
+	@echo $(wordlist 1, 6, $(string))
+	@echo $(wordlist 5, 7, $(string))
+	@echo $(wordlist 100, 110, $(string))
+	@echo $(wordlist 7, 10, $(string2))
+EOF
+close(MAKEFILE);
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "6\n"
+         ."2058\n"
+         ."word.pl\n"
+         ."\n"
+         ."word.pl\n"
+         ."\n"
+	 ."FORCE.pl word.pl\n"
+	 ."\n"
+	 ."word.pl general_test2.pl FORCE.pl word.pl generic_test.perl MAKEFILES_variable.pl\n"
+	 ."generic_test.perl MAKEFILES_variable.pl\n"
+	 ."\n"
+	 ."word.pl general_test2.pl FORCE.pl word.pl\n";
+&compare_output($answer, &get_logfile(1));
+
+
+# Test error conditions
+
+run_make_test('FOO = foo bar biz baz
+
+word-e1: ; @echo $(word ,$(FOO))
+word-e2: ; @echo $(word abc ,$(FOO))
+word-e3: ; @echo $(word 1a,$(FOO))
+
+wordlist-e1: ; @echo $(wordlist ,,$(FOO))
+wordlist-e2: ; @echo $(wordlist abc ,,$(FOO))
+wordlist-e3: ; @echo $(wordlist 1, 12a ,$(FOO))',
+              'word-e1',
+              "#MAKEFILE#:3: *** non-numeric first argument to 'word' function: ''.  Stop.",
+              512);
+
+run_make_test(undef,
+              'word-e2',
+              "#MAKEFILE#:4: *** non-numeric first argument to 'word' function: 'abc '.  Stop.",
+              512);
+
+run_make_test(undef,
+              'word-e3',
+              "#MAKEFILE#:5: *** non-numeric first argument to 'word' function: '1a'.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e1',
+              "#MAKEFILE#:7: *** non-numeric first argument to 'wordlist' function: ''.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e2',
+              "#MAKEFILE#:8: *** non-numeric first argument to 'wordlist' function: 'abc '.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e3',
+              "#MAKEFILE#:9: *** non-numeric second argument to 'wordlist' function: ' 12a '.  Stop.",
+              512);
+
+# Test error conditions again, but this time in a variable reference
+
+run_make_test('FOO = foo bar biz baz
+
+W = $(word $x,$(FOO))
+WL = $(wordlist $s,$e,$(FOO))
+
+word-e: ; @echo $(W)
+wordlist-e: ; @echo $(WL)',
+              'word-e x=',
+              "#MAKEFILE#:3: *** non-numeric first argument to 'word' function: ''.  Stop.",
+              512);
+
+run_make_test(undef,
+              'word-e x=abc',
+              "#MAKEFILE#:3: *** non-numeric first argument to 'word' function: 'abc'.  Stop.",
+              512);
+
+run_make_test(undef,
+              'word-e x=0',
+              "#MAKEFILE#:3: *** first argument to 'word' function must be greater than 0.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e s= e=',
+              "#MAKEFILE#:4: *** non-numeric first argument to 'wordlist' function: ''.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e s=abc e=',
+              "#MAKEFILE#:4: *** non-numeric first argument to 'wordlist' function: 'abc'.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e s=4 e=12a',
+              "#MAKEFILE#:4: *** non-numeric second argument to 'wordlist' function: '12a'.  Stop.",
+              512);
+
+run_make_test(undef,
+              'wordlist-e s=0 e=12',
+              "#MAKEFILE#:4: *** invalid first argument to 'wordlist' function: '0'.  Stop.",
+              512);
+
+
+# TEST #8 -- test $(firstword )
+#
+run_make_test('
+void :=
+list := $(void) foo bar baz #
+
+a := $(word 1,$(list))
+b := $(firstword $(list))
+
+.PHONY: all
+
+all:
+	@test "$a" = "$b" && echo $a
+',
+'',
+'foo');
+
+
+# TEST #9 -- test $(lastword )
+#
+run_make_test('
+void :=
+list := $(void) foo bar baz #
+
+a := $(word $(words $(list)),$(list))
+b := $(lastword $(list))
+
+.PHONY: all
+
+all:
+	@test "$a" = "$b" && echo $a
+',
+'',
+'baz');
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/misc/bs-nl b/tests/scripts/misc/bs-nl
new file mode 100644
index 0000000..4fc3f63
--- /dev/null
+++ b/tests/scripts/misc/bs-nl
@@ -0,0 +1,129 @@
+#                                                                    -*-perl-*-
+$description = "Test backslash-newline handling.";
+
+$details = "";
+
+# TEST #1
+# -------
+
+# Backslash-newlines in recipes
+
+# These are basic backslash-newlines with no tricks
+run_make_test("fast:;\@echo fa\\\nst\n",
+              '', 'fast');
+
+run_make_test("slow:;\@: no-op; echo sl\\\now\n",
+              '', 'slow');
+
+run_make_test("dquote:;\@echo \"dqu\\\note\"\n",
+              '', 'dquote');
+
+run_make_test("squote:;\@echo 'squ\\\note'\n",
+              '', "squ\\\note");
+
+# Ensure that a leading prefix character is omitted
+run_make_test("fast:;\@echo fa\\\n\tst\n",
+              '', 'fast');
+
+run_make_test("slow:;\@: no-op; echo sl\\\n\tow\n",
+              '', 'slow');
+
+run_make_test("dquote:;\@echo \"dqu\\\n\tote\"\n",
+              '', 'dquote');
+
+run_make_test("squote:;\@echo 'squ\\\n\tote'\n",
+              '', "squ\\\note");
+
+# Ensure that ONLY the leading prefix character is omitted
+run_make_test("fast:;\@echo fa\\\n\t  st\n",
+              '', 'fa st');
+
+run_make_test("slow:;\@: no-op; echo sl\\\n\t\tow\n",
+              '', "sl ow");
+
+run_make_test("dquote:;\@echo \"dqu\\\n\t    ote\"\n",
+              '', 'dqu    ote');
+
+run_make_test("squote:;\@echo 'squ\\\n\t\t   ote'\n",
+              '', "squ\\\n\t   ote");
+
+# Backslash-newlines in variable values
+
+# Simple
+run_make_test(q!
+var = he\
+llo
+var:;@echo '|$(var)|'!,
+              '', "|he llo|");
+
+# Condense trailing space
+run_make_test(q!
+var = he  \
+llo
+var:;@echo '|$(var)|'!,
+              '', "|he llo|");
+
+# Remove leading space
+run_make_test(q!
+var = he\
+    llo
+var:;@echo '|$(var)|'!,
+              '', "|he llo|");
+
+# Multiple bs/nl condensed
+run_make_test(q!
+var = he\
+\
+\
+    llo
+var:;@echo '|$(var)|'!,
+              '', "|he llo|");
+
+# POSIX: Preserve trailing space
+run_make_test(q!
+.POSIX:
+x = y
+var = he  \
+llo
+var:;@echo '|$(var)|'!,
+              '', "|he   llo|");
+
+# POSIX: One space per bs-nl
+run_make_test(q!
+.POSIX:
+x = y
+var = he\
+\
+\
+    llo
+var:;@echo '|$(var)|'!,
+              '', "|he   llo|");
+
+# Savannah #39035: handle whitespace in call
+run_make_test(q!
+f = echo $(1)
+t:; @$(call f,"a \
+            b"); \
+        $(call f,"a \
+            b")
+!,
+              '', "a b\na b\n");
+
+# Savannah #38945: handle backslash CRLF
+# We need our own makefile so we can set binmode
+my $m1 = get_tmpfile();
+open(MAKEFILE, "> $m1");
+binmode(MAKEFILE);
+print MAKEFILE "FOO = foo \\\r\n";
+close(MAKEFILE);
+
+my $m2 = get_tmpfile();
+open(MAKEFILE, "> $m2");
+print MAKEFILE "include $m1\ndefine BAR\nall: ; \@echo \$(FOO) bar\nendef\n\$(eval \$(BAR))\n";
+close(MAKEFILE);
+
+run_make_with_options($m2, '', get_logfile());
+compare_output("foo bar\n", get_logfile(1));
+
+
+1;
diff --git a/tests/scripts/misc/close_stdout b/tests/scripts/misc/close_stdout
new file mode 100644
index 0000000..18606c3
--- /dev/null
+++ b/tests/scripts/misc/close_stdout
@@ -0,0 +1,9 @@
+#                                                                    -*-perl-*-
+
+$description = "Make sure make exits with an error if stdout is full.";
+
+if (-e '/dev/full') {
+  run_make_test('', '-v > /dev/full', '/^#MAKE#: write error/', 256);
+}
+
+1;
diff --git a/tests/scripts/misc/fopen-fail b/tests/scripts/misc/fopen-fail
new file mode 100644
index 0000000..6580e51
--- /dev/null
+++ b/tests/scripts/misc/fopen-fail
@@ -0,0 +1,15 @@
+#                                                                    -*-perl-*-
+
+$description = "Make sure make exits with an error if fopen fails.";
+
+# Recurse infinitely until we run out of open files, and ensure we
+# fail with a non-zero exit code.  Don't bother to test the output
+# since it's hard to know what it will be, exactly.
+# See Savannah bug #27374.
+
+run_make_test(q!
+include $(lastword $(MAKEFILE_LIST))
+!,
+              '', undef, 512);
+
+1;
diff --git a/tests/scripts/misc/general1 b/tests/scripts/misc/general1
new file mode 100644
index 0000000..352fc6a
--- /dev/null
+++ b/tests/scripts/misc/general1
@@ -0,0 +1,51 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to test the
+simple functionality of make.  It mimics the
+rebuilding of a product with dependencies.
+It also tests the simple definition of VPATH.";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<EOF;
+VPATH = $workdir
+edit:  main.o kbd.o commands.o display.o \\
+       insert.o
+\t\@echo cc -o edit main.o kbd.o commands.o display.o \\
+                  insert.o
+main.o : main.c defs.h
+\t\@echo cc -c main.c
+kbd.o : kbd.c defs.h command.h
+\t\@echo cc -c kbd.c
+commands.o : command.c defs.h command.h
+\t\@echo cc -c commands.c
+display.o : display.c defs.h buffer.h
+\t\@echo cc -c display.c
+insert.o : insert.c defs.h buffer.h
+\t\@echo cc -c insert.c
+EOF
+
+close(MAKEFILE);
+
+
+@files_to_touch = ("$workdir${pathsep}main.c","$workdir${pathsep}defs.h",
+               "$workdir${pathsep}kbd.c","$workdir${pathsep}command.h",
+               "$workdir${pathsep}commands.c","$workdir${pathsep}display.c",
+               "$workdir${pathsep}buffer.h","$workdir${pathsep}insert.c",
+	       "$workdir${pathsep}command.c");
+
+&touch(@files_to_touch);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "cc -c main.c\ncc -c kbd.c\ncc -c commands.c\ncc -c display.c
+cc -c insert.c\ncc -o edit main.o kbd.o commands.o display.o insert.o\n";
+
+# COMPARE RESULTS
+
+if (&compare_output($answer,&get_logfile(1))) {
+  unlink @files_to_touch;
+}
+
+1;
diff --git a/tests/scripts/misc/general2 b/tests/scripts/misc/general2
new file mode 100644
index 0000000..fb5c3aa
--- /dev/null
+++ b/tests/scripts/misc/general2
@@ -0,0 +1,50 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to test the
+simple functionality of make.  It is the same as
+general_test1 except that this one tests the
+definition of a variable to hold the object filenames.";
+
+open(MAKEFILE,"> $makefile");
+
+# The contents of the Makefile ...
+
+print MAKEFILE <<EOF;
+VPATH = $workdir
+objects = main.o kbd.o commands.o display.o insert.o
+edit:  \$(objects)
+\t\@echo cc -o edit \$(objects)
+main.o : main.c defs.h
+\t\@echo cc -c main.c
+kbd.o : kbd.c defs.h command.h
+\t\@echo cc -c kbd.c
+commands.o : command.c defs.h command.h
+\t\@echo cc -c commands.c
+display.o : display.c defs.h buffer.h
+\t\@echo cc -c display.c
+insert.o : insert.c defs.h buffer.h
+\t\@echo cc -c insert.c
+EOF
+
+close(MAKEFILE);
+
+
+@files_to_touch = ("$workdir${pathsep}main.c","$workdir${pathsep}defs.h",
+               "$workdir${pathsep}kbd.c","$workdir${pathsep}command.h",
+               "$workdir${pathsep}commands.c","$workdir${pathsep}display.c",
+               "$workdir${pathsep}buffer.h","$workdir${pathsep}insert.c",
+	       "$workdir${pathsep}command.c");
+
+&touch(@files_to_touch);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "cc -c main.c\ncc -c kbd.c\ncc -c commands.c\ncc -c display.c
+cc -c insert.c\ncc -o edit main.o kbd.o commands.o display.o insert.o\n";
+
+if (&compare_output($answer,&get_logfile(1))) {
+  unlink @files_to_touch;
+}
+
+1;
diff --git a/tests/scripts/misc/general3 b/tests/scripts/misc/general3
new file mode 100644
index 0000000..8ad0f8e
--- /dev/null
+++ b/tests/scripts/misc/general3
@@ -0,0 +1,313 @@
+#                                                                    -*-perl-*-
+
+$description = "\
+This tests random features of the parser that need to be supported, and
+which have either broken at some point in the past or seem likely to
+break.";
+
+run_make_test("
+# We want to allow both empty commands _and_ commands that resolve to empty.
+EMPTY =
+
+.PHONY: all a1 a2 a3 a4
+all: a1 a2 a3 a4
+
+a1:;
+a2:
+\t
+a3:;\$(EMPTY)
+a4:
+\t\$(EMPTY)
+
+\# Non-empty lines that expand to nothing should also be ignored.
+STR =     \# Some spaces
+TAB =   \t  \# A TAB and some spaces
+
+\$(STR)
+
+\$(STR) \$(TAB)",
+              '', "#MAKE#: Nothing to be done for 'all'.");
+
+# TEST 2
+
+# Make sure files without trailing newlines are handled properly.
+# Have to use the old style invocation to test this.
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+print MAKEFILE "all:;\@echo FOO = \$(FOO)\nFOO = foo";
+close(MAKEFILE);
+
+&run_make_with_options($makefile2,"",&get_logfile);
+$answer = "FOO = foo\n";
+&compare_output($answer,&get_logfile(1));
+
+# TEST 3
+
+# Check semicolons in variable references
+
+run_make_test('
+$(if true,$(info true; true))
+all: ; @:
+',
+              '', 'true; true');
+
+# TEST 4
+
+# Check that backslashes in command scripts are handled according to POSIX.
+# Checks Savannah bug # 1332.
+
+# Test the fastpath / no quotes
+run_make_test('
+all:
+	@echo foo\
+bar
+	@echo foo\
+	bar
+	@echo foo\
+    bar
+	@echo foo\
+	    bar
+	@echo foo \
+bar
+	@echo foo \
+	bar
+	@echo foo \
+    bar
+	@echo foo \
+	    bar
+',
+              '', 'foobar
+foobar
+foo bar
+foo bar
+foo bar
+foo bar
+foo bar
+foo bar');
+
+# Test the fastpath / single quotes
+run_make_test("
+all:
+	\@echo 'foo\\
+bar'
+	\@echo 'foo\\
+	bar'
+	\@echo 'foo\\
+    bar'
+	\@echo 'foo\\
+	    bar'
+	\@echo 'foo \\
+bar'
+	\@echo 'foo \\
+	bar'
+	\@echo 'foo \\
+    bar'
+	\@echo 'foo \\
+	    bar'
+",
+              '', 'foo\
+bar
+foo\
+bar
+foo\
+    bar
+foo\
+    bar
+foo \
+bar
+foo \
+bar
+foo \
+    bar
+foo \
+    bar');
+
+# Test the fastpath / double quotes
+run_make_test('
+all:
+	@echo "foo\
+bar"
+	@echo "foo\
+	bar"
+	@echo "foo\
+    bar"
+	@echo "foo\
+	    bar"
+	@echo "foo \
+bar"
+	@echo "foo \
+	bar"
+	@echo "foo \
+    bar"
+	@echo "foo \
+	    bar"
+',
+              '', 'foobar
+foobar
+foo    bar
+foo    bar
+foo bar
+foo bar
+foo     bar
+foo     bar');
+
+# Test the slow path / no quotes
+run_make_test('
+all:
+	@echo hi; echo foo\
+bar
+	@echo hi; echo foo\
+	bar
+	@echo hi; echo foo\
+ bar
+	@echo hi; echo foo\
+	 bar
+	@echo hi; echo foo \
+bar
+	@echo hi; echo foo \
+	bar
+	@echo hi; echo foo \
+ bar
+	@echo hi; echo foo \
+	 bar
+',
+              '', 'hi
+foobar
+hi
+foobar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar');
+
+# Test the slow path / no quotes.  This time we put the slow path
+# determination _after_ the backslash-newline handling.
+run_make_test('
+all:
+	@echo foo\
+bar; echo hi
+	@echo foo\
+	bar; echo hi
+	@echo foo\
+ bar; echo hi
+	@echo foo\
+	 bar; echo hi
+	@echo foo \
+bar; echo hi
+	@echo foo \
+	bar; echo hi
+	@echo foo \
+ bar; echo hi
+	@echo foo \
+	 bar; echo hi
+',
+              '', 'foobar
+hi
+foobar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo bar
+hi');
+
+# Test the slow path / single quotes
+run_make_test("
+all:
+	\@echo hi; echo 'foo\\
+bar'
+	\@echo hi; echo 'foo\\
+	bar'
+	\@echo hi; echo 'foo\\
+    bar'
+	\@echo hi; echo 'foo\\
+	    bar'
+	\@echo hi; echo 'foo \\
+bar'
+	\@echo hi; echo 'foo \\
+	bar'
+	\@echo hi; echo 'foo \\
+    bar'
+	\@echo hi; echo 'foo \\
+	    bar'
+",
+              '', 'hi
+foo\
+bar
+hi
+foo\
+bar
+hi
+foo\
+    bar
+hi
+foo\
+    bar
+hi
+foo \
+bar
+hi
+foo \
+bar
+hi
+foo \
+    bar
+hi
+foo \
+    bar');
+
+# Test the slow path / double quotes
+run_make_test('
+all:
+	@echo hi; echo "foo\
+bar"
+	@echo hi; echo "foo\
+	bar"
+	@echo hi; echo "foo\
+    bar"
+	@echo hi; echo "foo\
+	    bar"
+	@echo hi; echo "foo \
+bar"
+	@echo hi; echo "foo \
+	bar"
+	@echo hi; echo "foo \
+    bar"
+	@echo hi; echo "foo \
+	    bar"
+',
+              '', 'hi
+foobar
+hi
+foobar
+hi
+foo    bar
+hi
+foo    bar
+hi
+foo bar
+hi
+foo bar
+hi
+foo     bar
+hi
+foo     bar');
+
+1;
diff --git a/tests/scripts/misc/general4 b/tests/scripts/misc/general4
new file mode 100644
index 0000000..6d42a16
--- /dev/null
+++ b/tests/scripts/misc/general4
@@ -0,0 +1,82 @@
+#                                                                    -*-perl-*-
+
+$description = "\
+This tests random features of make's algorithms, often somewhat obscure,
+which have either broken at some point in the past or seem likely to
+break.";
+
+run_make_test('
+# Make sure that subdirectories built as prerequisites are actually handled
+# properly.
+
+all: dir/subdir/file.a
+
+dir/subdir: ; @echo mkdir -p dir/subdir
+
+dir/subdir/file.b: dir/subdir ; @echo touch dir/subdir/file.b
+
+dir/subdir/%.a: dir/subdir/%.b ; @echo cp $< $@',
+              '', "mkdir -p dir/subdir\ntouch dir/subdir/file.b\ncp dir/subdir/file.b dir/subdir/file.a\n");
+
+# Test implicit rules
+
+&touch('foo.c');
+run_make_test('foo: foo.o',
+              'CC="@echo cc" OUTPUT_OPTION=',
+              'cc -c foo.c
+cc foo.o -o foo');
+unlink('foo.c');
+
+
+# Test implicit rules with '$' in the name (see se_implicit)
+
+run_make_test(q!
+%.foo : baz$$bar ; @echo 'done $<'
+%.foo : bar$$baz ; @echo 'done $<'
+test.foo:
+baz$$bar bar$$baz: ; @echo '$@'
+!,
+              '',
+              "baz\$bar\ndone baz\$bar");
+
+
+# Test implicit rules with '$' in the name (see se_implicit)
+# Use the '$' in the pattern.
+
+run_make_test(q!
+%.foo : %$$bar ; @echo 'done $<'
+test.foo:
+test$$bar: ; @echo '$@'
+!,
+              '',
+              "test\$bar\ndone test\$bar");
+
+# Make sure that subdirectories built as prerequisites are actually handled
+# properly... this time with '$'
+
+run_make_test(q!
+
+all: dir/subdir/file.$$a
+
+dir/subdir: ; @echo mkdir -p '$@'
+
+dir/subdir/file.$$b: dir/subdir ; @echo touch '$@'
+
+dir/subdir/%.$$a: dir/subdir/%.$$b ; @echo 'cp $< $@'
+!,
+              '', "mkdir -p dir/subdir\ntouch dir/subdir/file.\$b\ncp dir/subdir/file.\$b dir/subdir/file.\$a\n");
+
+# Test odd whitespace at the beginning of a line
+
+run_make_test("
+all:
+   \f
+
+    \\
+ \f  \\
+    \013 \\
+all: ; \@echo hi
+",
+              '', "hi\n");
+
+1;
diff --git a/tests/scripts/misc/utf8 b/tests/scripts/misc/utf8
new file mode 100644
index 0000000..2adcd07
--- /dev/null
+++ b/tests/scripts/misc/utf8
@@ -0,0 +1,14 @@
+#                                                                    -*-perl-*-
+$description = "Test utf8 handling.";
+
+$details = "";
+
+# Variable names containing UTF8 characters
+run_make_test("
+\xe2\x96\xaa := hello
+\$(info \$(\xe2\x96\xaa))
+all:
+",
+              '', "hello\n#MAKE#: Nothing to be done for 'all'.");
+
+1;
diff --git a/tests/scripts/options/dash-B b/tests/scripts/options/dash-B
new file mode 100644
index 0000000..9c708b7
--- /dev/null
+++ b/tests/scripts/options/dash-B
@@ -0,0 +1,85 @@
+#                                                                    -*-perl-*-
+
+$description = "Test make -B (always remake) option.\n";
+
+$details = "\
+Construct a simple makefile that builds a target.
+Invoke make once, so it builds everything.  Invoke it again and verify
+that nothing is built.  Then invoke it with -B and verify that everything
+is built again.";
+
+&touch('bar.x');
+
+run_make_test('
+.SUFFIXES:
+
+.PHONY: all
+all: foo
+
+foo: bar.x
+	@echo cp $< $@
+	@echo "" > $@
+',
+              '', 'cp bar.x foo');
+
+run_make_test(undef, '', "#MAKE#: Nothing to be done for 'all'.");
+run_make_test(undef, '-B', 'cp bar.x foo');
+
+# Put the timestamp for foo into the future; it should still be remade.
+
+utouch(1000, 'foo');
+run_make_test(undef, '', "#MAKE#: Nothing to be done for 'all'.");
+run_make_test(undef, '-B', 'cp bar.x foo');
+
+# Clean up
+
+rmfiles('bar.x', 'foo');
+
+# Test -B with the re-exec feature: we don't want to re-exec forever
+# Savannah bug # 7566
+
+run_make_test('
+all: ; @:
+$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
+include foo.x
+foo.x: ; @touch $@
+',
+              '-B', 'MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory
+MAKE_RESTARTS=1');
+
+rmfiles('foo.x');
+
+# Test -B with the re-exec feature: we DO want -B in the "normal" part of the
+# makefile.
+
+&touch('blah.x');
+
+run_make_test('
+all: blah.x ; @echo $@
+$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
+include foo.x
+foo.x: ; @touch $@
+blah.x: ; @echo $@
+',
+              '-B', 'MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory
+MAKE_RESTARTS=1
+blah.x
+all');
+
+rmfiles('foo.x', 'blah.x');
+
+# Test that $? is set properly with -B; all prerequisites will be newer!
+
+utouch(-10, 'x.b');
+touch('x.a');
+
+run_make_test(q!
+x.a: x.b ; @echo $?
+!,
+              '-B', "x.b\n");
+
+unlink(qw(x.a x.b));
+
+1;
diff --git a/tests/scripts/options/dash-C b/tests/scripts/options/dash-C
new file mode 100644
index 0000000..42d0a8b
--- /dev/null
+++ b/tests/scripts/options/dash-C
@@ -0,0 +1,71 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the -C option to GNU make.";
+
+$details = "\
+This test is similar to the clean test except that this test creates the file
+to delete in the work directory instead of the current directory.  Make is
+called from another directory using the -C workdir option so that it can both
+find the makefile and the file to delete in the work directory.";
+
+$example = $workdir . $pathsep . "EXAMPLE";
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE <<EOF;
+all: ; \@echo This makefile did not clean the dir ... good
+clean: ; $delete_command EXAMPLE\$(ext)
+EOF
+close(MAKEFILE);
+
+# TEST #1
+# -------
+&touch($example);
+
+&run_make_with_options("${testname}.mk",
+	               "-C $workdir clean",
+		       &get_logfile);
+
+chdir $workdir;
+$wpath = &get_this_pwd;
+chdir $pwd;
+
+if (-f $example) {
+  $test_passed = 0;
+}
+
+# Create the answer to what should be produced by this Makefile
+$answer = "$make_name: Entering directory '$wpath'\n"
+        . "$delete_command EXAMPLE\n"
+        . "$make_name: Leaving directory '$wpath'\n";
+
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #2
+# -------
+# Do it again with trailing "/"; this should work the same
+
+$example .= "slash";
+
+&touch($example);
+
+&run_make_with_options("${testname}.mk",
+	               "-C $workdir/ clean ext=slash",
+		       &get_logfile);
+
+chdir $workdir;
+$wpath = &get_this_pwd;
+chdir $pwd;
+
+if (-f $example) {
+  $test_passed = 0;
+}
+
+# Create the answer to what should be produced by this Makefile
+$answer = "$make_name: Entering directory '$wpath'\n"
+        . "$delete_command EXAMPLEslash\n"
+        . "$make_name: Leaving directory '$wpath'\n";
+
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/options/dash-I b/tests/scripts/options/dash-I
new file mode 100644
index 0000000..d47a8d8
--- /dev/null
+++ b/tests/scripts/options/dash-I
@@ -0,0 +1,59 @@
+#                                                                    -*-perl-*-
+
+$description ="The following test creates a makefile to test the -I option.";
+
+$details = "\
+This test tests the -I option by including a filename in
+another directory and giving make that directory name
+under -I in the command line.  Without this option, the make
+would fail to find the included file.  It also checks to make
+sure that the -I option gets passed to recursive makes.";
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+$mf2 = substr ($makefile2, index ($makefile2, $pathsep) + 1);
+print MAKEFILE <<EOF;
+include $mf2
+all:
+\t\@echo There should be no errors for this makefile.
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile2");
+
+print MAKEFILE <<EOF;
+ANOTHER:
+\t\@echo This is another included makefile
+recurse:
+\t\$(MAKE) ANOTHER -f $makefile
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"-I $workdir all",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "There should be no errors for this makefile.\n";
+&compare_output($answer,&get_logfile(1));
+
+
+$answer = "This is another included makefile\n";
+&run_make_with_options($makefile,"-I $workdir ANOTHER",&get_logfile);
+&compare_output($answer,&get_logfile(1));
+
+
+$answer = "$mkpath ANOTHER -f $makefile
+${make_name}[1]: Entering directory '$pwd'
+This is another included makefile
+${make_name}[1]: Leaving directory '$pwd'\n";
+
+&run_make_with_options($makefile,"-I $workdir recurse",&get_logfile);
+&compare_output($answer,&get_logfile(1));
diff --git a/tests/scripts/options/dash-W b/tests/scripts/options/dash-W
new file mode 100644
index 0000000..20b9f74
--- /dev/null
+++ b/tests/scripts/options/dash-W
@@ -0,0 +1,88 @@
+#                                                                    -*-perl-*-
+
+$description = "Test make -W (what if) option.\n";
+
+# Basic build
+
+run_make_test('
+a.x: b.x
+a.x b.x: ; echo >> $@
+',
+              '', "echo >> b.x\necho >> a.x");
+
+# Run it again: nothing should happen
+
+run_make_test(undef, '', "#MAKE#: 'a.x' is up to date.");
+
+# Now run it with -W b.x: should rebuild a.x
+
+run_make_test(undef, '-W b.x', 'echo >> a.x');
+
+# Put the timestamp for a.x into the future; it should still be remade.
+
+utouch(1000, 'a.x');
+run_make_test(undef, '', "#MAKE#: 'a.x' is up to date.");
+run_make_test(undef, '-W b.x', 'echo >> a.x');
+
+# Clean up
+
+rmfiles('a.x', 'b.x');
+
+# Test -W with the re-exec feature: we don't want to re-exec forever
+# Savannah bug # 7566
+
+# First set it up with a normal build
+
+run_make_test('
+all: baz.x ; @:
+include foo.x
+foo.x: bar.x
+	@echo "\$$(info restarts=\$$(MAKE_RESTARTS))" > $@
+	@echo "touch $@"
+bar.x: ; echo >> $@
+baz.x: bar.x ; @echo "touch $@"
+',
+              '', '#MAKEFILE#:3: foo.x: No such file or directory
+echo >> bar.x
+touch foo.x
+restarts=1
+touch baz.x');
+
+# Now run with -W bar.x
+
+# Tweak foo.x's timestamp so the update will change it.
+&utouch(1000, 'foo.x');
+
+run_make_test(undef, '-W bar.x', "restarts=\ntouch foo.x\nrestarts=1\ntouch baz.x");
+
+rmfiles('foo.x', 'bar.x');
+
+# Test -W on vpath-found files: it should take effect.
+# Savannah bug # 15341
+
+mkdir('x-dir', 0777);
+utouch(-20, 'x-dir/x');
+touch('y');
+
+run_make_test('
+y: x ; @echo cp $< $@
+',
+              '-W x-dir/x VPATH=x-dir',
+              'cp x-dir/x y');
+
+# Make sure ./ stripping doesn't interfere with the match.
+
+run_make_test('
+y: x ; @echo cp $< $@
+',
+              '-W ./x-dir/x VPATH=x-dir',
+              'cp x-dir/x y');
+
+run_make_test(undef,
+              '-W x-dir/x VPATH=./x-dir',
+              'cp ./x-dir/x y');
+
+unlink(qw(y x-dir/x));
+rmdir('x-dir');
+
+1;
diff --git a/tests/scripts/options/dash-e b/tests/scripts/options/dash-e
new file mode 100644
index 0000000..17c3fc8
--- /dev/null
+++ b/tests/scripts/options/dash-e
@@ -0,0 +1,24 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to ...";
+
+$details = "";
+
+$extraENV{GOOGLE} = 'boggle';
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+GOOGLE = bazzle
+all:; @echo "$(GOOGLE)"
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile, '-e' ,&get_logfile);
+
+$answer = "boggle\n";
+
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/options/dash-f b/tests/scripts/options/dash-f
new file mode 100644
index 0000000..3aa4746
--- /dev/null
+++ b/tests/scripts/options/dash-f
@@ -0,0 +1,85 @@
+$description = "The following test tests that if you specify greater \n"
+              ."than one '-f makefilename' on the command line, \n"
+              ."that make concatenates them.  This test creates three \n"
+              ."makefiles and specifies all of them with the -f option \n"
+              ."on the command line.  To make sure they were concatenated, \n"
+              ."we then call make with the rules from the concatenated \n"
+              ."makefiles one at a time.  Finally, it calls all three \n"
+              ."rules in one call to make and checks that the output\n"
+              ."is in the correct order.";
+
+$makefile2 = &get_tmpfile;
+$makefile3 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "all: \n";
+print MAKEFILE "\t\@echo This is the output from the original makefile\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+# Create a second makefile
+open(MAKEFILE,"> $makefile2");
+print MAKEFILE "TWO: \n";
+print MAKEFILE "\t\@echo This is the output from makefile 2\n";
+close(MAKEFILE);
+
+# Create a third makefile
+open(MAKEFILE,"> $makefile3");
+print MAKEFILE "THREE: \n";
+print MAKEFILE "\t\@echo This is the output from makefile 3\n";
+close(MAKEFILE);
+
+
+# Create the answer to what should be produced by this Makefile
+$answer = "This is the output from the original makefile\n";
+
+# Run make to catch the default rule
+&run_make_with_options($makefile,"-f $makefile2 -f $makefile3",&get_logfile,0);
+
+&compare_output($answer,&get_logfile(1));
+
+
+# Run Make again with the rule from the second makefile: TWO
+$answer = "This is the output from makefile 2\n";
+
+&run_make_with_options($makefile,"-f $makefile2 -f $makefile3 TWO",&get_logfile,0);
+
+&compare_output($answer,&get_logfile(1));
+     
+
+# Run Make again with the rule from the third makefile: THREE
+
+$answer = "This is the output from makefile 3\n";
+&run_make_with_options($makefile,
+                       "-f $makefile2 -f $makefile3 THREE",
+                       &get_logfile,
+                       0);
+&compare_output($answer,&get_logfile(1));
+
+
+# Run Make again with ALL three rules in the order 2 1 3 to make sure
+# that all rules are executed in the proper order
+
+$answer = "This is the output from makefile 2\n";
+$answer .= "This is the output from the original makefile\n";
+$answer .= "This is the output from makefile 3\n";
+&run_make_with_options($makefile,
+                       "-f $makefile2 -f $makefile3 TWO all THREE",
+		       &get_logfile,
+                       0);
+&compare_output($answer,&get_logfile(1));
+       
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/options/dash-k b/tests/scripts/options/dash-k
new file mode 100644
index 0000000..e784e0d
--- /dev/null
+++ b/tests/scripts/options/dash-k
@@ -0,0 +1,115 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the make -k (don't stop on error) option.\n";
+
+$details = "\
+The makefile created in this test is a simulation of building
+a small product.  However, the trick to this one is that one
+of the dependencies of the main target does not exist.
+Without the -k option, make would fail immediately and not
+build any part of the target.  What we are looking for here,
+is that make builds the rest of the dependencies even though
+it knows that at the end it will fail to rebuild the main target.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<EOF;
+VPATH = $workdir
+edit:  main.o kbd.o commands.o display.o
+\t\@echo cc -o edit main.o kbd.o commands.o display.o
+
+main.o : main.c defs.h
+\t\@echo cc -c main.c
+
+kbd.o : kbd.c defs.h command.h
+\t\@echo cc -c kbd.c
+
+commands.o : command.c defs.h command.h
+\t\@echo cc -c commands.c
+
+display.o : display.c defs.h buffer.h
+\t\@echo cc -c display.c
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+@files_to_touch = ("$workdir${pathsep}main.c","$workdir${pathsep}defs.h",
+               "$workdir${pathsep}command.h",
+               "$workdir${pathsep}commands.c","$workdir${pathsep}display.c",
+               "$workdir${pathsep}buffer.h",
+	       "$workdir${pathsep}command.c");
+
+&touch(@files_to_touch);
+
+if ($vos) {
+  $error_code = 3307;
+}
+else {
+  $error_code = 512;
+}
+
+&run_make_with_options($makefile, "-k", &get_logfile, $error_code);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "cc -c main.c
+$make_name: *** No rule to make target 'kbd.c', needed by 'kbd.o'.
+cc -c commands.c
+cc -c display.c
+$make_name: Target 'edit' not remade because of errors.\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer, &get_logfile(1));
+
+unlink(@files_to_touch) unless $keep;
+
+
+# TEST 1: Make sure that top-level targets that depend on targets that
+# previously failed to build, aren't attempted.  Regression for PR/1634.
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+print MAKEFILE <<'EOF';
+.SUFFIXES:
+
+all: exe1 exe2; @echo making $@
+
+exe1 exe2: lib; @echo cp $^ $@
+
+lib: foo.o; @echo cp $^ $@
+
+foo.o: ; exit 1
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, "-k", &get_logfile, $error_code);
+
+$answer = "exit 1
+$makefile2:9: recipe for target 'foo.o' failed
+$make_name: *** [foo.o] Error 1
+$make_name: Target 'all' not remade because of errors.\n";
+
+&compare_output($answer, &get_logfile(1));
+
+# TEST -- make sure we keep the error code if we can't create an included
+# makefile.
+
+run_make_test('all: ; @echo hi
+include ifile
+ifile: no-such-file; @false
+',
+              '-k',
+              "#MAKEFILE#:2: ifile: No such file or directory
+#MAKE#: *** No rule to make target 'no-such-file', needed by 'ifile'.
+#MAKE#: Failed to remake makefile 'ifile'.
+hi\n",
+              512);
+
+1;
diff --git a/tests/scripts/options/dash-l b/tests/scripts/options/dash-l
new file mode 100644
index 0000000..0b0f196
--- /dev/null
+++ b/tests/scripts/options/dash-l
@@ -0,0 +1,56 @@
+#                                                                    -*-perl-*-
+# Date: Tue, 11 Aug 1992 09:34:26 -0400
+# From: pds@lemming.webo.dg.com (Paul D. Smith)
+
+$description = "Test load balancing (-l) option.";
+
+$details = "\
+This test creates a makefile where all depends on three rules
+which contain the same body.  Each rule checks for the existence
+of a temporary file; if it exists an error is generated.  If it
+doesn't exist then it is created, the rule sleeps, then deletes
+the temp file again.  Thus if any of the rules are run in
+parallel the test will fail.  When make is called in this test,
+it is given the -l option with a value of 0.0001.  This ensures
+that the load will be above this number and make will therefore
+decide that it cannot run more than one job even though -j 4 was
+also specified on the command line.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<'EOF';
+SHELL = /bin/sh
+
+define test
+if [ ! -f test-file ]; then \
+  echo >> test-file; sleep 2; rm -f test-file; \
+else \
+  echo $@ FAILED; \
+fi
+endef
+
+all : ONE TWO THREE
+ONE : ; @$(test)
+TWO : ; @$(test)
+THREE : ; @$(test)
+EOF
+
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+$mkoptions = "-l 0.0001";
+$mkoptions .= " -j 4" if ($parallel_jobs);
+
+# We have to wait longer than the default (5s).
+&run_make_with_options($makefile, $mkoptions, &get_logfile, 0, 8);
+
+$slurp = &read_file_into_string (&get_logfile(1));
+if ($slurp !~ /cannot enforce load limit/) {
+  &compare_output("", &get_logfile(1));
+}
+
+1;
diff --git a/tests/scripts/options/dash-n b/tests/scripts/options/dash-n
new file mode 100644
index 0000000..dfed419
--- /dev/null
+++ b/tests/scripts/options/dash-n
@@ -0,0 +1,100 @@
+#                                                                    -*-perl-*-
+$description = "Test the -n option.\n";
+
+$details = "Try various uses of -n and ensure they all give the correct results.\n";
+
+touch('orig');
+
+run_make_test(q!
+final: intermediate ; echo >> $@
+intermediate: orig ; echo >> $@
+!,
+              '', "echo >> intermediate\necho >> final\n");
+
+# TEST 1
+
+run_make_test(undef, '-Worig -n', "echo >> intermediate\necho >> final\n");
+
+rmfiles(qw(orig intermediate final));
+
+# We consider the actual updated timestamp of targets with all
+# recursive commands, even with -n.  Switching this to the new model
+# is non-trivial because we use a trick below to change the log content
+# before we compare it ...
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+
+print MAKEFILE <<'EOF';
+.SUFFIXES:
+BAR =     # nothing
+FOO = +$(BAR)
+a: b; echo > $@
+b: c; $(FOO)
+EOF
+
+close(MAKEFILE);
+
+&utouch(-20, 'b');
+&utouch(-10, 'a');
+&touch('c');
+
+# TEST 2
+
+&run_make_with_options($makefile2, "", &get_logfile);
+$answer = "$make_name: 'a' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 3
+
+&run_make_with_options($makefile2, "-n", &get_logfile);
+$answer = "$make_name: 'a' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST 4
+
+unlink(qw(a b));
+
+&run_make_with_options($makefile2, "-t -n", &get_logfile);
+
+open(DASH_N_LOG, ">>" . &get_logfile(1));
+print DASH_N_LOG "a exists but should not!\n" if -e 'a';
+print DASH_N_LOG "b exists but should not!\n" if -e 'b';
+close(DASH_N_LOG);
+
+&compare_output("touch b\ntouch a\n", &get_logfile(1));
+
+# CLEANUP
+
+unlink(qw(a b c));
+
+# Ensure -n continues to be included with recursive/re-execed make
+# See Savannah bug #38051
+
+$topmake = &get_tmpfile;
+$submake = &get_tmpfile;
+
+open(MAKEFILE, "> $topmake");
+print MAKEFILE <<"EOF";
+foo: ; \@\$(MAKE) -f "$submake" bar
+EOF
+close(MAKEFILE);
+
+
+# The bar target should print what would happen, but not actually run
+open(MAKEFILE, "> $submake");
+print MAKEFILE <<'EOF';
+inc: ; touch $@
+-include inc
+bar: ; @echo $(strip $(MAKEFLAGS))
+EOF
+close(MAKEFILE);
+
+&run_make_with_options($topmake, '-n --no-print-directory', &get_logfile);
+$answer = "$make_path -f \"$submake\" bar\ntouch inc\necho n --no-print-directory\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('inc');
+
+1;
diff --git a/tests/scripts/options/dash-q b/tests/scripts/options/dash-q
new file mode 100644
index 0000000..194588d
--- /dev/null
+++ b/tests/scripts/options/dash-q
@@ -0,0 +1,77 @@
+#                                                                    -*-perl-*-
+$description = "Test the -q option.\n";
+
+$details = "Try various uses of -q and ensure they all give the correct results.\n";
+
+# TEST 0
+
+run_make_test(qq!
+one:
+two: ;
+three: ; :
+four: ; \$(.XY)
+five: ; \\
+ \$(.XY)
+six: ; \\
+ \$(.XY)
+\t\$(.XY)
+seven: ; \\
+ \$(.XY)
+\t: foo
+\t\$(.XY)
+!,
+              '-q one', '');
+
+# TEST 1
+
+run_make_test(undef, '-q two', '');
+
+# TEST 2
+
+run_make_test(undef, '-q three', '', 256);
+
+# TEST 3
+
+run_make_test(undef, '-q four', '');
+
+# TEST 4
+
+run_make_test(undef, '-q five', '');
+
+# TEST 5
+
+run_make_test(undef, '-q six', '');
+
+# TEST 6
+
+run_make_test(undef, '-q seven', '', 256);
+
+# TEST 7 : Savannah bug # 7144
+
+run_make_test('
+one:: ; @echo one
+one:: ; @echo two
+',
+              '-q', '', 256);
+
+# TEST 7 : Savannah bug # 42249
+# Make sure we exit with 1 even for prerequisite updates
+run_make_test('
+build-stamp: ; echo $@
+build-arch: build-stamp
+build-x: build-arch
+build-y: build-x
+',
+              '-q build-y', '', 256);
+
+# TEST 8
+# Make sure we exit with 2 on error even with -q
+run_make_test('
+build-stamp: ; echo $@
+build-arch: build-stamp-2
+build-x: build-arch
+build-y: build-x
+',
+              '-q build-y', "#MAKE#: *** No rule to make target 'build-stamp-2', needed by 'build-arch'.  Stop.\n", 512);
+
+1;
diff --git a/tests/scripts/options/dash-t b/tests/scripts/options/dash-t
new file mode 100644
index 0000000..ec27d7a
--- /dev/null
+++ b/tests/scripts/options/dash-t
@@ -0,0 +1,58 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the -t option.\n";
+
+$details = "Look out for regressions of prior bugs related to -t.\n";
+# That means, nobody has even tried to make the tests below comprehensive
+
+# TEST 0
+# bug reported by Henning Makholm <henning@makholm.net> on 2001-11-03:
+#   make 3.79.1 touches only interm-[ab] but reports final-[a] as
+#   'up to date' without touching them.
+# The 'obvious' fix didn't work for double-colon rules, so pay special
+# attention to them.
+
+open(MAKEFILE, "> $makefile");
+print MAKEFILE <<'EOMAKE';
+final-a: interm-a ; echo >> $@
+final-b: interm-b ; echo >> $@
+interm-a:: orig1-a ; echo >> $@
+interm-a:: orig2-a ; echo >> $@
+interm-b:: orig1-b ; echo >> $@
+interm-b:: orig2-b ; echo >> $@
+EOMAKE
+close(MAKEFILE);
+
+&utouch(-30, 'orig1-a','orig2-b');
+&utouch(-20, 'interm-a','interm-b');
+&utouch(-10, 'final-a','final-b');
+&touch('orig2-a','orig1-b');
+
+&run_make_with_options($makefile, "-t final-a final-b", &get_logfile);
+$answer = "touch interm-a\ntouch final-a\ntouch interm-b\ntouch final-b\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('orig1-a', 'orig2-a', 'interm-a', 'final-a');
+unlink('orig1-b', 'orig2-b', 'interm-b', 'final-b');
+
+# TEST 1
+# -t should not touch files with no commands.
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+print MAKEFILE <<'EOMAKE';
+
+PHOOEY: xxx
+xxx: ; @:
+
+EOMAKE
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, "-t", &get_logfile);
+$answer = "touch xxx\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('xxx');
+
+1;
diff --git a/tests/scripts/options/eval b/tests/scripts/options/eval
new file mode 100644
index 0000000..0f82409
--- /dev/null
+++ b/tests/scripts/options/eval
@@ -0,0 +1,29 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the --eval option.";
+
+$details = "Verify that --eval options take effect,
+and are passed to sub-makes.";
+
+# Verify that --eval is evaluated first
+run_make_test(q!
+BAR = bar
+all: ; @echo all
+recurse: ; @$(MAKE) -f #MAKEFILE# && echo recurse!,
+              '--eval=\$\(info\ eval\) FOO=\$\(BAR\)', "eval\nall");
+
+# Make sure that --eval is handled correctly during recursion
+run_make_test(undef, '--no-print-directory --eval=\$\(info\ eval\) recurse',
+              "eval\neval\nall\nrecurse");
+
+# Make sure that --eval is handled correctly during restarting
+run_make_test(q!
+all: ; @echo $@
+-include gen.mk
+gen.mk: ; @echo > $@
+!,
+              '--eval=\$\(info\ eval\)', "eval\neval\nall");
+
+unlink('gen.mk');
+
+1;
diff --git a/tests/scripts/options/general b/tests/scripts/options/general
new file mode 100644
index 0000000..d35bb35
--- /dev/null
+++ b/tests/scripts/options/general
@@ -0,0 +1,35 @@
+#                                                                    -*-perl-*-
+$description = "Test generic option processing.\n";
+
+open(MAKEFILE, "> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "foo 1foo: ; \@echo \$\@\n";
+
+close(MAKEFILE);
+
+# TEST 0
+
+&run_make_with_options($makefile, "-j 1foo", &get_logfile);
+if (!$parallel_jobs) {
+  $answer = "$make_name: Parallel jobs (-j) are not supported on this platform.\n$make_name: Resetting to single job (-j1) mode.\n1foo\n";
+}
+else {
+  $answer = "1foo\n";
+}
+
+# TEST 1
+
+# This test prints the usage string; I don't really know a good way to
+# test it.  I guess I could invoke make with a known-bad option to see
+# what the usage looks like, then compare it to what I get here... :(
+
+# If I were always on UNIX, I could invoke it with 2>/dev/null, then
+# just check the error code.
+
+&run_make_with_options($makefile, "-j1foo 2>/dev/null", &get_logfile, 512);
+$answer = "";
+&compare_output($answer, &get_logfile(1));
+
+1;
diff --git a/tests/scripts/options/print-directory b/tests/scripts/options/print-directory
new file mode 100644
index 0000000..a05bbee
--- /dev/null
+++ b/tests/scripts/options/print-directory
@@ -0,0 +1,33 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the -w option to GNU make.";
+
+# Simple test without -w
+run_make_test(q!
+all: ; @echo hi
+!,
+        "", "hi\n");
+
+# Simple test with -w
+run_make_test(undef, "-w",
+              "#MAKE#: Entering directory '#PWD#'\nhi\n#MAKE#: Leaving directory '#PWD#'\n");
+
+# Test makefile rebuild to ensure no enter/leave
+run_make_test(q!
+include foo
+all: ;@:
+foo: ; touch foo
+!,
+        "", "#MAKEFILE#:2: foo: No such file or directory\ntouch foo\n");
+unlink('foo');
+
+# Test makefile rebuild with -w
+run_make_test(q!
+include foo
+all: ;@:
+foo: ; touch foo
+!,
+        "-w", "#MAKE#: Entering directory '#PWD#'\n#MAKEFILE#:2: foo: No such file or directory\ntouch foo\n#MAKE#: Leaving directory '#PWD#'\n");
+unlink('foo');
+
+1;
diff --git a/tests/scripts/options/symlinks b/tests/scripts/options/symlinks
new file mode 100644
index 0000000..a1bfce0
--- /dev/null
+++ b/tests/scripts/options/symlinks
@@ -0,0 +1,68 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the -L option.";
+
+$details = "Verify that symlink handling with and without -L works properly.";
+
+# Only run these tests if the system sypports symlinks
+
+# Apparently the Windows port of Perl reports that it does support symlinks
+# (in that the symlink() function doesn't fail) but it really doesn't, so
+# check for it explicitly.
+
+if ($port_type eq 'W32' || !( eval { symlink("",""); 1 })) {
+  # This test is N/A 
+  -1;
+} else {
+
+  # Set up a symlink sym -> dep
+  # We'll make both dep and targ older than sym
+  $pwd =~ m%/([^/]+)$%;
+  $dirnm = $1;
+  &utouch(-10, 'dep');
+  &utouch(-5, 'targ');
+  symlink("../$dirnm/dep", 'sym');
+
+  # Without -L, nothing should happen
+  # With -L, it should update targ
+  run_make_test('targ: sym ; @echo make $@ from $<', '',
+                "#MAKE#: 'targ' is up to date.");
+  run_make_test(undef, '-L', "make targ from sym");
+
+  # Now update dep; in all cases targ should be out of date.
+  &touch('dep');
+  run_make_test(undef, '', "make targ from sym");
+  run_make_test(undef, '-L', "make targ from sym");
+
+  # Now update targ; in all cases targ should be up to date.
+  &touch('targ');
+  run_make_test(undef, '', "#MAKE#: 'targ' is up to date.");
+  run_make_test(undef, '-L', "#MAKE#: 'targ' is up to date.");
+
+  # Add in a new link between sym and dep.  Be sure it's newer than targ.
+  sleep(1);
+  rename('dep', 'dep1');
+  symlink('dep1', 'dep');
+
+  # Without -L, nothing should happen
+  # With -L, it should update targ
+  run_make_test(undef, '', "#MAKE#: 'targ' is up to date.");
+  run_make_test(undef, '-L', "make targ from sym");
+
+  rmfiles('targ', 'dep', 'sym', 'dep1');
+
+  # Check handling when symlinks point to non-existent files.  Without -L we
+  # should get an error: with -L we should use the timestamp of the symlink.
+
+  symlink("../$dirname/dep", 'sym');
+  run_make_test('targ: sym ; @echo make $@ from $<', '',
+                "#MAKE#: *** No rule to make target 'sym', needed by 'targ'.  Stop.", 512);
+
+  run_make_test('targ: sym ; @echo make $@ from $<', '-L',
+                'make targ from sym');
+
+
+  rmfiles('targ', 'sym');
+
+  1;
+}
diff --git a/tests/scripts/options/warn-undefined-variables b/tests/scripts/options/warn-undefined-variables
new file mode 100644
index 0000000..ce15507
--- /dev/null
+++ b/tests/scripts/options/warn-undefined-variables
@@ -0,0 +1,25 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the --warn-undefined-variables option.";
+
+$details = "Verify that warnings are printed for referencing undefined variables.";
+
+# Without --warn-undefined-variables, nothing should happen
+run_make_test('
+EMPTY =
+EREF = $(EMPTY)
+UREF = $(UNDEFINED)
+
+SEREF := $(EREF)
+SUREF := $(UREF)
+
+all: ; @echo ref $(EREF) $(UREF)',
+              '', 'ref');
+
+# With --warn-undefined-variables, it should warn me
+run_make_test(undef, '--warn-undefined-variables',
+              "#MAKEFILE#:7: warning: undefined variable 'UNDEFINED'
+#MAKEFILE#:9: warning: undefined variable 'UNDEFINED'
+ref");
+
+1;
diff --git a/tests/scripts/targets/DEFAULT b/tests/scripts/targets/DEFAULT
new file mode 100644
index 0000000..f3d5148
--- /dev/null
+++ b/tests/scripts/targets/DEFAULT
@@ -0,0 +1,53 @@
+$description = "The following test creates a makefile to override part\n"
+              ."of one Makefile with Another Makefile with the .DEFAULT\n"
+              ."rule.";
+
+$details = "This tests the use of the .DEFAULT special target to say that \n"
+          ."to remake any target that cannot be made fram the information\n"
+          ."in the containing makefile, make should look in another makefile\n"
+          ."This test gives this makefile the target bar which is not \n"
+          ."defined here but passes the target bar on to another makefile\n"
+          ."which does have the target bar defined.\n";
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "foo:\n";
+print MAKEFILE "\t\@echo Executing rule FOO\n\n";
+print MAKEFILE ".DEFAULT:\n";
+print MAKEFILE "\t\@\$(MAKE) -f $makefile2 \$\@ \n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile2");
+
+print MAKEFILE "bar:\n";
+print MAKEFILE "\t\@echo Executing rule BAR\n\n";
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,'bar',&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "${make_name}[1]: Entering directory '$pwd'\n"
+        . "Executing rule BAR\n"
+        . "${make_name}[1]: Leaving directory '$pwd'\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/targets/FORCE b/tests/scripts/targets/FORCE
new file mode 100644
index 0000000..eb8f251
--- /dev/null
+++ b/tests/scripts/targets/FORCE
@@ -0,0 +1,40 @@
+#                                                                    -*-perl-*-
+
+$description = "The following tests rules without Commands or Dependencies.";
+
+$details = "If the rule ...\n";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE ".IGNORE :\n";
+print MAKEFILE "clean: FORCE\n";
+print MAKEFILE "\t$delete_command clean\n";
+print MAKEFILE "FORCE:\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+
+# Create a file named "clean".  This is the same name as the target clean
+# and tricks the target into thinking that it is up to date.  (Unless you
+# use the .PHONY target.
+&touch("clean");
+
+$answer = "$delete_command clean\n";
+&run_make_with_options($makefile,"clean",&get_logfile);
+
+&compare_output($answer,&get_logfile(1));
+
+1;
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/targets/INTERMEDIATE b/tests/scripts/targets/INTERMEDIATE
new file mode 100644
index 0000000..2b3021b
--- /dev/null
+++ b/tests/scripts/targets/INTERMEDIATE
@@ -0,0 +1,108 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the behaviour of the .INTERMEDIATE target.";
+
+$details = "\
+Test the behavior of the .INTERMEDIATE special target.
+Create a makefile where a file would not normally be considered
+intermediate, then specify it as .INTERMEDIATE.  Build and ensure it's
+deleted properly.  Rebuild to ensure that it's not created if it doesn't
+exist but doesn't need to be built.  Change the original and ensure
+that the intermediate file and the ultimate target are both rebuilt, and
+that the intermediate file is again deleted.
+
+Try this with implicit rules and explicit rules: both should work.\n";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+
+.INTERMEDIATE: foo.e bar.e
+
+# Implicit rule test
+%.d : %.e ; cp $< $@
+%.e : %.f ; cp $< $@
+
+foo.d: foo.e
+
+# Explicit rule test
+foo.c: foo.e bar.e; cat $^ > $@
+EOF
+
+close(MAKEFILE);
+
+# TEST #0
+
+&utouch(-20, 'foo.f', 'bar.f');
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "cp foo.f foo.e\ncp foo.e foo.d\nrm foo.e\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #1
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "$make_name: 'foo.d' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #2
+
+&utouch(-10, 'foo.d');
+&touch('foo.f');
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "cp foo.f foo.e\ncp foo.e foo.d\nrm foo.e\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #3
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "cp foo.f foo.e\ncp bar.f bar.e\ncat foo.e bar.e > foo.c\nrm bar.e foo.e\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #4
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "$make_name: 'foo.c' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #5
+
+&utouch(-10, 'foo.c');
+&touch('foo.f');
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "cp foo.f foo.e\ncp bar.f bar.e\ncat foo.e bar.e > foo.c\nrm bar.e foo.e\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #6 -- added for PR/1669: don't remove files mentioned on the cmd line.
+
+&run_make_with_options($makefile,'foo.e',&get_logfile);
+$answer = "cp foo.f foo.e\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('foo.f', 'foo.e', 'foo.d', 'foo.c', 'bar.f', 'bar.e', 'bar.d', 'bar.c');
+
+# TEST #7 -- added for PR/1423
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+
+print MAKEFILE <<'EOF';
+all: foo
+foo.a: ; touch $@
+%: %.a ; touch $@
+.INTERMEDIATE: foo.a
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, '-R', &get_logfile);
+$answer = "touch foo.a\ntouch foo\nrm foo.a\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('foo');
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/targets/ONESHELL b/tests/scripts/targets/ONESHELL
new file mode 100644
index 0000000..87713da
--- /dev/null
+++ b/tests/scripts/targets/ONESHELL
@@ -0,0 +1,88 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the behaviour of the .ONESHELL target.";
+
+$details = "";
+
+# Some shells (*shakes fist at Solaris*) cannot handle multiple flags in
+# separate arguments.
+my $t = `/bin/sh -e -c true 2>/dev/null`;
+my $multi_ok = $? == 0;
+
+# Simple
+
+run_make_test(q!
+.ONESHELL:
+all:
+	a=$$$$
+	[ 0"$$a" -eq "$$$$" ] || echo fail
+!,
+              '', 'a=$$
+[ 0"$a" -eq "$$" ] || echo fail
+');
+
+# Simple but use multi-word SHELLFLAGS
+
+if ($multi_ok) {
+    run_make_test(q!
+.ONESHELL:
+.SHELLFLAGS = -e -c
+all:
+	a=$$$$
+	[ 0"$$a" -eq "$$$$" ] || echo fail
+!,
+              '', 'a=$$
+[ 0"$a" -eq "$$" ] || echo fail
+');
+}
+
+# Again, but this time with inner prefix chars
+
+run_make_test(q!
+.ONESHELL:
+all:
+	a=$$$$
+	@-+    [ 0"$$a" -eq "$$$$" ] || echo fail
+!,
+              '', 'a=$$
+[ 0"$a" -eq "$$" ] || echo fail
+');
+
+# This time with outer prefix chars
+
+run_make_test(q!
+.ONESHELL:
+all:
+	   @a=$$$$
+	    [ 0"$$a" -eq "$$$$" ] || echo fail
+!,
+              '', '');
+
+
+# This time with outer and inner prefix chars
+
+run_make_test(q!
+.ONESHELL:
+all:
+	   @a=$$$$
+	    -@     +[ 0"$$a" -eq "$$$$" ] || echo fail
+!,
+              '', '');
+
+
+# Now try using a different interpreter
+
+run_make_test(q!
+.RECIPEPREFIX = >
+.ONESHELL:
+SHELL = #PERL#
+.SHELLFLAGS = -e
+all:
+>	   @$$a=5
+>	    +7;
+>	@y=qw(a b c);
+>print "a = $$a, y = (@y)\n";
+!,
+              '', "a = 12, y = (a b c)\n");
+
+1;
diff --git a/tests/scripts/targets/PHONY b/tests/scripts/targets/PHONY
new file mode 100644
index 0000000..c8e2110
--- /dev/null
+++ b/tests/scripts/targets/PHONY
@@ -0,0 +1,54 @@
+#                                                                    -*-perl-*-
+
+$description = "The following tests the use of a PHONY target.  It makes\n"
+              ."sure that the rules under a target get executed even if\n"
+              ."a filename of the same name of the target exists in the\n"
+              ."directory.\n";
+
+$details = "This makefile in this test declares the target clean to be a \n"
+          ."PHONY target.  We then create a file named \"clean\" in the \n"
+          ."directory.  Although this file exists, the rule under the target\n"
+          ."clean should still execute because of it's phony status.";
+
+$example = "EXAMPLE_FILE";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE ".PHONY : clean \n";
+print MAKEFILE "all: \n";
+print MAKEFILE "\t\@echo This makefile did not clean the dir ... good\n";
+print MAKEFILE "clean: \n";
+print MAKEFILE "\t$delete_command $example clean\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch($example);
+
+# Create a file named "clean".  This is the same name as the target clean
+# and tricks the target into thinking that it is up to date.  (Unless you
+# use the .PHONY target.
+&touch("clean");
+
+$answer = "$delete_command $example clean\n";
+&run_make_with_options($makefile,"clean",&get_logfile);
+
+if (-f $example) {
+  $test_passed = 0;
+}
+
+&compare_output($answer,&get_logfile(1));
+
+1;
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/targets/POSIX b/tests/scripts/targets/POSIX
new file mode 100644
index 0000000..a24e3bc
--- /dev/null
+++ b/tests/scripts/targets/POSIX
@@ -0,0 +1,57 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the behaviour of the .POSIX target.";
+
+$details = "";
+
+
+# Ensure turning on .POSIX enables the -e flag for the shell
+# We can't assume the exit value of "false" because on different systems it's
+# different.
+
+my $script = 'false; true';
+my $flags = '-ec';
+my $out = `/bin/sh $flags '$script' 2>&1`;
+my $err = $? >> 8;
+run_make_test(qq!
+.POSIX:
+all: ; \@$script
+!,
+              '', "#MAKEFILE#:3: recipe for target 'all' failed
+#MAKE#: *** [all] Error $err\n", 512);
+
+# User settings must override .POSIX
+$flags = '-xc';
+$out = `/bin/sh $flags '$script' 2>&1`;
+run_make_test(qq!
+.SHELLFLAGS = $flags
+.POSIX:
+all: ; \@$script
+!,
+              '', $out);
+
+# Test the default value of various POSIX-specific variables
+my %POSIX = (AR => 'ar', ARFLAGS => '-rv',
+             YACC => 'yacc', YFLAGS => '',
+             LEX => 'lex', LFLAGS => '',
+             LDFLAGS => '',
+             CC => 'c99', CFLAGS => '-O',
+             FC => 'fort77', FFLAGS => '-O 1',
+             GET => 'get', GFLAGS => '',
+             SCCSFLAGS => '', SCCSGETFLAGS => '-s');
+my $make = join('', map { "\t\@echo '$_=\$($_)'\n" } sort keys %POSIX);
+my $r = join('', map { "$_=$POSIX{$_}\n"} sort keys %POSIX);
+run_make_test(qq!
+.POSIX:
+all:
+$make
+!,
+              '', $r);
+
+# Make sure that local settings take precedence
+%extraENV = map { $_ => "xx-$_" } keys %POSIX;
+$r = join('', map { "$_=xx-$_\n"} sort keys %POSIX);
+run_make_test(undef, '', $r);
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/targets/SECONDARY b/tests/scripts/targets/SECONDARY
new file mode 100644
index 0000000..447c275
--- /dev/null
+++ b/tests/scripts/targets/SECONDARY
@@ -0,0 +1,190 @@
+#! -*-perl-*-
+
+$description = "Test the behaviour of the .SECONDARY target.";
+
+$details = "\
+Test the behavior of the .SECONDARY special target.
+Create a makefile where a file would not normally be considered
+intermediate, then specify it as .SECONDARY.  Build and note that it's
+not automatically deleted.  Delete the file.  Rebuild to ensure that
+it's not created if it doesn't exist but doesn't need to be built.
+Change the original and ensure that the secondary file and the ultimate
+target are both rebuilt, and that the secondary file is not deleted.
+
+Try this with implicit rules and explicit rules: both should work.\n";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE <<'EOF';
+
+.SECONDARY: foo.e
+
+# Implicit rule test
+%.d : %.e ; cp $< $@
+%.e : %.f ; cp $< $@
+
+foo.d: foo.e
+
+# Explicit rule test
+foo.c: foo.e ; cp $< $@
+EOF
+
+close(MAKEFILE);
+
+# TEST #1
+
+&utouch(-20, 'foo.f');
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "cp foo.f foo.e\ncp foo.e foo.d\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #2
+
+unlink('foo.e');
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "$make_name: 'foo.d' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #3
+
+&utouch(-10, 'foo.d');
+&touch('foo.f');
+
+&run_make_with_options($makefile,'foo.d',&get_logfile);
+$answer = "cp foo.f foo.e\ncp foo.e foo.d\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #4
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "cp foo.e foo.c\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #5
+
+unlink('foo.e');
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "$make_name: 'foo.c' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #6
+
+&utouch(-10, 'foo.c');
+&touch('foo.f');
+
+&run_make_with_options($makefile,'foo.c',&get_logfile);
+$answer = "cp foo.f foo.e\ncp foo.e foo.c\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('foo.f', 'foo.e', 'foo.d', 'foo.c');
+
+# TEST #7 -- test the "global" .SECONDARY, with no targets.
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+
+print MAKEFILE <<'EOF';
+.SECONDARY:
+
+final: intermediate
+intermediate: source
+
+final intermediate source:
+	echo $< > $@
+EOF
+
+close(MAKEFILE);
+
+&utouch(-10, 'source');
+touch('final');
+
+&run_make_with_options($makefile2, '', &get_logfile);
+$answer = "$make_name: 'final' is up to date.\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink('source', 'final', 'intermediate');
+
+
+# TEST #8 -- test the "global" .SECONDARY, with .PHONY.
+
+touch('version2');
+run_make_test('
+.PHONY: version
+.SECONDARY:
+version2: version ; @echo GOOD
+all: version2',
+              'all', 'GOOD');
+
+unlink('version2');
+
+# TEST #9 -- Savannah bug #15919
+# The original fix for this bug caused a new bug, shown here.
+
+touch(qw(1.a 2.a));
+
+run_make_test('
+%.c : %.b ; cp $< $@
+%.b : %.a ; cp $< $@
+all : 1.c 2.c
+2.a: 1.c', '-rR -j',
+'cp 1.a 1.b
+cp 1.b 1.c
+cp 2.a 2.b
+cp 2.b 2.c
+rm 1.b 2.b');
+
+unlink(qw(1.a 2.a 1.c 2.c));
+
+# TEST #10 -- Savannah bug #15919
+touch('test.0');
+run_make_test('
+.SECONDARY : test.1 test.2 test.3
+
+test : test.4
+
+%.4 : %.int %.3 ; touch $@
+
+%.int : %.3 %.2 ; touch $@
+
+%.3 : | %.2 ; touch $@
+
+%.2 : %.1 ; touch $@
+
+%.1 : %.0 ; touch $@', '-rR -j 2',
+'touch test.1
+touch test.2
+touch test.3
+touch test.int
+touch test.4
+rm test.int');
+
+# After a touch of test.0 it should give the same output, except we don't need
+# to rebuild test.3 (order-only)
+sleep(1);
+touch('test.0');
+run_make_test(undef, '-rR -j 2',
+'touch test.1
+touch test.2
+touch test.int
+touch test.4
+rm test.int');
+
+# With both test.0 and test.3 updated it should still build everything except
+# test.3
+sleep(1);
+touch('test.0', 'test.3');
+run_make_test(undef, '-rR -j 2',
+'touch test.1
+touch test.2
+touch test.int
+touch test.4
+rm test.int');
+
+unlink(qw(test.0 test.1 test.2 test.3 test.4));
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/targets/SILENT b/tests/scripts/targets/SILENT
new file mode 100644
index 0000000..4bb0a0f
--- /dev/null
+++ b/tests/scripts/targets/SILENT
@@ -0,0 +1,42 @@
+#                                                                    -*-perl-*-
+
+$description = "The following tests the special target .SILENT.  By simply\n"
+              ."mentioning this as a target, it tells make not to print\n"
+              ."commands before executing them.";
+
+$details = "This test is the same as the clean test except that it should\n"
+          ."not echo its command before deleting the specified file.\n";
+
+$example = "EXAMPLE_FILE";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE ".SILENT : clean\n";
+print MAKEFILE "clean: \n";
+print MAKEFILE "\t$delete_command EXAMPLE_FILE\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch($example);
+
+$answer = "";
+&run_make_with_options($makefile,"clean",&get_logfile,0);
+if (-f $example) {
+  $test_passed = 0;
+}
+&compare_output($answer,&get_logfile(1));
+
+1;
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/targets/clean b/tests/scripts/targets/clean
new file mode 100644
index 0000000..b32c976
--- /dev/null
+++ b/tests/scripts/targets/clean
@@ -0,0 +1,50 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to delete a \n"
+              ."file in the directory.  It tests to see if make will \n"
+              ."NOT execute the command unless the rule is given in \n"
+              ."the make command line.";
+
+$example = "EXAMPLE_FILE";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "all: \n";
+print MAKEFILE "\t\@echo This makefile did not clean the dir... good\n";
+print MAKEFILE "clean: \n";
+print MAKEFILE "\t$delete_command EXAMPLE_FILE\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch($example);
+
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "This makefile did not clean the dir... good\n";
+
+&compare_output($answer,&get_logfile(1)) || &error ("abort");
+
+
+$answer = "$delete_command $example\n";
+&run_make_with_options($makefile,"clean",&get_logfile,0);
+if (-f $example) {
+  $test_passed = 0;
+}
+&compare_output($answer,&get_logfile(1)) || &error ("abort");
+
+1;
+
+
+
+
+
+
+
+
+
diff --git a/tests/scripts/test_template b/tests/scripts/test_template
new file mode 100644
index 0000000..3fd3f95
--- /dev/null
+++ b/tests/scripts/test_template
@@ -0,0 +1,29 @@
+#                                                                    -*-perl-*-
+
+$description = "<FILL IN SHORT DESCRIPTION HERE>";
+$details = "<FILL IN DETAILS OF HOW YOU TEST WHAT YOU SAY YOU ARE TESTING>";
+
+# Run a make test.  See the documentation of run_make_test() in
+# run_make_tests.pl, but briefly the first argument is a string with the
+# contents of a makefile to be tested, the second is a string containing the
+# arguments to be passed to the make invocation, the third is a string
+# containing the expected output.  The fourth is the expected exit code for
+# make.  If not specified, it's assumed that the make program should succeed
+# (exit with 0).
+
+run_make_test('Your test makefile goes here',
+              'Arguments to pass to make go here',
+              'Expected output from the invocation goes here');
+
+# There are various special tokens, options, etc.  See the full documentation
+# in run_make_tests.pl.
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/variables/CURDIR b/tests/scripts/variables/CURDIR
new file mode 100644
index 0000000..ee7cacb
--- /dev/null
+++ b/tests/scripts/variables/CURDIR
@@ -0,0 +1,20 @@
+#                                                                    -*-perl-*-
+
+$description = "This tests the CURDIR varaible.";
+
+$details = "Echo CURDIR both with and without -C.  Also ensure overrides work.";
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE "all: ; \@echo \$(CURDIR)\n";
+close(MAKEFILE);
+
+
+# TEST #1
+# -------
+
+&run_make_with_options($makefile,"",&get_logfile);
+$answer = "$pwd\n";
+&compare_output($answer,&get_logfile(1));
+
+
+1;
diff --git a/tests/scripts/variables/DEFAULT_GOAL b/tests/scripts/variables/DEFAULT_GOAL
new file mode 100644
index 0000000..8188ce7
--- /dev/null
+++ b/tests/scripts/variables/DEFAULT_GOAL
@@ -0,0 +1,87 @@
+#                                                                    -*-perl-*-
+$description = "Test the .DEFAULT_GOAL special variable.";
+
+$details = "";
+
+
+# Test #1: basic logic.
+#
+run_make_test('
+# Basics.
+#
+foo: ; @:
+
+ifneq ($(.DEFAULT_GOAL),foo)
+$(error )
+endif
+
+# Reset to empty.
+#
+.DEFAULT_GOAL :=
+
+bar: ; @:
+
+ifneq ($(.DEFAULT_GOAL),bar)
+$(error )
+endif
+
+# Change to a different goal.
+#
+
+.DEFAULT_GOAL := baz
+
+baz: ; @echo $@
+',
+'',
+'baz');
+
+
+# Test #2: unknown goal.
+#
+run_make_test('
+.DEFAULT_GOAL = foo
+',
+'',
+"#MAKE#: *** No rule to make target 'foo'.  Stop.",
+512);
+
+
+# Test #3: more than one goal.
+#
+run_make_test('
+.DEFAULT_GOAL := foo bar
+',
+'',
+'#MAKE#: *** .DEFAULT_GOAL contains more than one target.  Stop.',
+512);
+
+
+# Test #4: Savannah bug #12226.
+#
+run_make_test('
+define rule
+foo: ; @echo $$@
+endef
+
+define make-rule
+$(eval $(rule))
+endef
+
+$(call make-rule)
+
+',
+'',
+'foo');
+
+# TEST #5: .DEFAULT_GOAL containing just whitespace (Savannah bug #25697)
+
+run_make_test('
+N =
+.DEFAULT_GOAL = $N  $N  # Just whitespace
+
+foo: ; @echo "boo"
+',
+              '', "#MAKE#: *** No targets.  Stop.\n", 512);
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/variables/GNUMAKEFLAGS b/tests/scripts/variables/GNUMAKEFLAGS
new file mode 100644
index 0000000..6e50794
--- /dev/null
+++ b/tests/scripts/variables/GNUMAKEFLAGS
@@ -0,0 +1,42 @@
+#                                                                    -*-perl-*-
+
+$description = "Test proper behavior of GNUMAKEFLAGS";
+
+# Accept flags from GNUMAKEFLAGS as well as MAKEFLAGS
+# Results always go in MAKEFLAGS
+
+$extraENV{'GNUMAKEFLAGS'} = '-e -r -R';
+
+run_make_test(q!
+all: ; @echo $(MAKEFLAGS)
+!,
+              '', 'erR');
+
+# Long arguments mean everything is prefixed with "-"
+
+$extraENV{'GNUMAKEFLAGS'} = '--no-print-directory -e -r -R --trace';
+
+run_make_test(q!
+all: ; @echo $(MAKEFLAGS)
+!,
+              '', "#MAKEFILE#:2: target 'all' does not exist
+echo erR --trace --no-print-directory
+erR --trace --no-print-directory");
+
+# Verify that re-exec / recursion doesn't duplicate flags from GNUMAKEFLAGS
+
+unlink('x.mk');
+
+$extraENV{GNUMAKEFLAGS} = '-Itst/bad';
+
+run_make_test(q!
+recurse: ; @echo $@; echo MAKEFLAGS = $$MAKEFLAGS; echo GNUMAKEFLAGS = $$GNUMAKEFLAGS; #MAKEPATH# -f #MAKEFILE# all
+all: ; @echo $@; echo MAKEFLAGS = $$MAKEFLAGS; echo GNUMAKEFLAGS = $$GNUMAKEFLAGS
+-include x.mk
+x.mk: ; @echo $@; echo MAKEFLAGS = $$MAKEFLAGS; echo GNUMAKEFLAGS = $$GNUMAKEFLAGS; echo > $@
+!,
+              "", "x.mk\nMAKEFLAGS = -Itst/bad\nGNUMAKEFLAGS =\nrecurse\nMAKEFLAGS = -Itst/bad\nGNUMAKEFLAGS =\n#MAKE#[1]: Entering directory '#PWD#'\nall\nMAKEFLAGS = w -Itst/bad\nGNUMAKEFLAGS =\n#MAKE#[1]: Leaving directory '#PWD#'\n");
+
+unlink('x.mk');
+
+1;
diff --git a/tests/scripts/variables/INCLUDE_DIRS b/tests/scripts/variables/INCLUDE_DIRS
new file mode 100644
index 0000000..c9662e9
--- /dev/null
+++ b/tests/scripts/variables/INCLUDE_DIRS
@@ -0,0 +1,46 @@
+#                                                                    -*-perl-*-
+$description = "Test the .INCLUDE_DIRS special variable.";
+
+$details = "";
+
+use Cwd;
+
+$dir = cwd;
+$dir =~ s,.*/([^/]+)$,../$1,;
+
+# Test #1: The content of .INCLUDE_DIRS depends on the platform for which
+#          make was built. What we know for sure is that it shouldn't be
+#          empty.
+#
+run_make_test('
+ifeq ($(.INCLUDE_DIRS),)
+$(warning .INCLUDE_DIRS is empty)
+endif
+
+.PHONY: all
+all:;@:
+',
+'',
+'');
+
+
+# Test #2: Make sure -I paths end up in .INCLUDE_DIRS.
+#
+run_make_test('
+ifeq ($(dir),)
+$(warning dir is empty)
+endif
+
+ifeq ($(filter $(dir),$(.INCLUDE_DIRS)),)
+$(warning .INCLUDE_DIRS does not contain $(dir))
+endif
+
+.PHONY: all
+all:;@:
+',
+"-I$dir dir=$dir",
+'');
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
diff --git a/tests/scripts/variables/LIBPATTERNS b/tests/scripts/variables/LIBPATTERNS
new file mode 100644
index 0000000..9182954
--- /dev/null
+++ b/tests/scripts/variables/LIBPATTERNS
@@ -0,0 +1,38 @@
+#                                                                    -*-perl-*-
+
+$description = "Test .LIBPATTERNS special variable.";
+
+$details = "";
+
+# TEST 0: basics
+
+touch('mtest_foo.a');
+
+run_make_test('
+.LIBPATTERNS = mtest_%.a
+all: -lfoo ; @echo "build $@ from $<"
+',
+              '', "build all from mtest_foo.a\n");
+
+# TEST 1: Handle elements that are not patterns.
+
+run_make_test('
+.LIBPATTERNS = mtest_foo.a mtest_%.a
+all: -lfoo ; @echo "build $@ from $<"
+',
+              '', "#MAKE#: .LIBPATTERNS element 'mtest_foo.a' is not a pattern
+build all from mtest_foo.a\n");
+
+# TEST 2: target-specific override
+
+# Uncomment this when we add support, see Savannah bug #25703
+# run_make_test('
+# .LIBPATTERNS = mbad_%.a
+# all: .LIBPATTERNS += mtest_%.a
+# all: -lfoo ; @echo "build $@ from $<"
+# ',
+#               '', "build all from mtest_foo.a\n");
+
+unlink('mtest_foo.a');
+
+1;
diff --git a/tests/scripts/variables/MAKE b/tests/scripts/variables/MAKE
new file mode 100644
index 0000000..dc62160
--- /dev/null
+++ b/tests/scripts/variables/MAKE
@@ -0,0 +1,24 @@
+#								     -*-perl-*-
+
+$description = "Test proper behavior of the MAKE variable";
+
+$details = "DETAILS";
+
+run_make_test(q!
+TMP  := $(MAKE)
+MAKE := $(subst X=$(X),,$(MAKE))
+all:
+	@echo $(TMP)
+	$(MAKE) -f #MAKEFILE# foo
+
+foo:
+	@echo $(MAKE)
+!,
+              '',
+              "#MAKEPATH#\n#MAKEPATH# -f #MAKEFILE# foo\n"
+              . "#MAKE#[1]: Entering directory '#PWD#'\n"
+              . "#MAKEPATH#\n#MAKE#[1]: Leaving directory '#PWD#'\n");
+
+rmfiles("foo");
+
+1;
diff --git a/tests/scripts/variables/MAKECMDGOALS b/tests/scripts/variables/MAKECMDGOALS
new file mode 100644
index 0000000..879283b
--- /dev/null
+++ b/tests/scripts/variables/MAKECMDGOALS
@@ -0,0 +1,52 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the MAKECMDGOALS variable.";
+
+$details = "\
+We construct a makefile with various targets, all of which print out
+\$(MAKECMDGOALS), then call it different ways.";
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE "\
+.DEFAULT all:
+	\@echo \$(MAKECMDGOALS)
+";
+close(MAKEFILE);
+
+# TEST #1
+
+&run_make_with_options($makefile,
+                       "",
+                       &get_logfile,
+                       0);
+$answer = "\n";
+&compare_output($answer,&get_logfile(1));
+
+# TEST #2
+
+&run_make_with_options($makefile,
+                       "all",
+                       &get_logfile,
+                       0);
+$answer = "all\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# TEST #3
+
+&run_make_with_options($makefile,
+                       "foo bar baz yaz",
+                       &get_logfile,
+                       0);
+$answer = "foo bar baz yaz\nfoo bar baz yaz\nfoo bar baz yaz\nfoo bar baz yaz\n";
+&compare_output($answer,&get_logfile(1));
+
+
+# This tells the test driver that the perl test script executed properly.
+1;
+
+
+
+
+
+
diff --git a/tests/scripts/variables/MAKEFILES b/tests/scripts/variables/MAKEFILES
new file mode 100644
index 0000000..b23da8e
--- /dev/null
+++ b/tests/scripts/variables/MAKEFILES
@@ -0,0 +1,53 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the MAKEFILES variable.";
+
+$makefile2 = &get_tmpfile;
+$makefile3 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE 'all: ; @echo DEFAULT RULE: M2=$(M2) M3=$(M3)', "\n";
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile2");
+print MAKEFILE <<EOF;
+M2 = m2
+NDEF: ; \@echo RULE FROM MAKEFILE 2
+EOF
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile3");
+print MAKEFILE <<EOF;
+M3 = m3
+NDEF3: ; \@echo RULE FROM MAKEFILE 3
+EOF
+close(MAKEFILE);
+
+
+&run_make_with_options($makefile, "MAKEFILES='$makefile2 $makefile3'",
+                       &get_logfile);
+$answer = "DEFAULT RULE: M2=m2 M3=m3\n";
+&compare_output($answer,&get_logfile(1));
+
+# TEST 2: Verify that included makefiles don't set the default goal.
+# See Savannah bug #13401.
+
+create_file('xx-inc.mk', '
+include_goal: ; @echo $@
+include xx-ind.mk
+');
+
+create_file('xx-ind.mk', '
+indirect_goal: ; @echo $@
+');
+
+run_make_test(q!
+top: ; @echo $@
+!,
+              'MAKEFILES=xx-inc.mk', "top\n");
+
+unlink(qw(xx-inc.mk xx-ind.mk));
+
+1;
diff --git a/tests/scripts/variables/MAKEFLAGS b/tests/scripts/variables/MAKEFLAGS
new file mode 100644
index 0000000..8a5d0f6
--- /dev/null
+++ b/tests/scripts/variables/MAKEFLAGS
@@ -0,0 +1,41 @@
+#                                                                    -*-perl-*-
+
+$description = "Test proper behavior of MAKEFLAGS";
+
+$details = "DETAILS";
+
+# Normal flags aren't prefixed with "-"
+run_make_test(q!
+all: ; @echo $(MAKEFLAGS)
+!,
+              '-e -r -R', 'erR');
+
+# Long arguments mean everything is prefixed with "-"
+run_make_test(q!
+all: ; @echo $(MAKEFLAGS)
+!,
+              '--no-print-directory -e -r -R --trace', "#MAKEFILE#:2: target 'all' does not exist
+echo erR --trace --no-print-directory
+erR --trace --no-print-directory");
+
+
+# Recursive invocations of make should accumulate MAKEFLAGS values.
+# Savannah bug #2216
+run_make_test(q!
+MSG = Fails
+all:
+	@echo '$@: MAKEFLAGS=$(MAKEFLAGS)'
+	@MSG=Works $(MAKE) -e -f #MAKEFILE# jump
+jump:
+	@echo '$@ $(MSG): MAKEFLAGS=$(MAKEFLAGS)'
+	@$(MAKE) -f #MAKEFILE# print
+print:
+	@echo '$@ $(MSG): MAKEFLAGS=$(MAKEFLAGS)'
+.PHONY: all jump print
+!,
+                  '--no-print-directory',
+                  'all: MAKEFLAGS= --no-print-directory
+jump Works: MAKEFLAGS=e --no-print-directory
+print Works: MAKEFLAGS=e --no-print-directory');
+
+1;
diff --git a/tests/scripts/variables/MAKELEVEL b/tests/scripts/variables/MAKELEVEL
new file mode 100644
index 0000000..96a4e74
--- /dev/null
+++ b/tests/scripts/variables/MAKELEVEL
@@ -0,0 +1,33 @@
+#                                                                    -*-perl-*-
+
+$description = "The following test creates a makefile to test
+makelevels in Make. It prints \$(MAKELEVEL) and then
+prints the environment variable MAKELEVEL";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<EOF;
+all:
+\t\@echo MAKELEVEL is \$(MAKELEVEL)
+\techo \$\$MAKELEVEL
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+# RUN MAKE
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# SET ANSWER
+
+$answer = "MAKELEVEL is 0\necho \$MAKELEVEL\n1\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/variables/MAKE_RESTARTS b/tests/scripts/variables/MAKE_RESTARTS
new file mode 100644
index 0000000..ef8e368
--- /dev/null
+++ b/tests/scripts/variables/MAKE_RESTARTS
@@ -0,0 +1,62 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the MAKE_RESTARTS variable.";
+
+# Test basic capability
+
+run_make_test('
+all: ; @:
+$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
+include foo.x
+foo.x: ; @touch $@
+',
+              '', 'MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory
+MAKE_RESTARTS=1');
+
+rmfiles('foo.x');
+
+# Test multiple restarts
+
+run_make_test('
+all: ; @:
+$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
+include foo.x
+foo.x: ; @echo "include bar.x" > $@
+bar.x: ; @touch $@
+',
+              '', 'MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory
+MAKE_RESTARTS=1
+foo.x:1: bar.x: No such file or directory
+MAKE_RESTARTS=2');
+
+rmfiles('foo.x', 'bar.x');
+
+# Test multiple restarts and make sure the variable is cleaned up
+
+run_make_test('
+recurse:
+	@echo recurse MAKE_RESTARTS=$$MAKE_RESTARTS
+	@$(MAKE) -f #MAKEFILE# all
+all:
+	@echo all MAKE_RESTARTS=$$MAKE_RESTARTS
+$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
+include foo.x
+foo.x: ; @echo "include bar.x" > $@
+bar.x: ; @touch $@
+',
+              '', "MAKE_RESTARTS=
+#MAKEFILE#:8: foo.x: No such file or directory
+MAKE_RESTARTS=1
+foo.x:1: bar.x: No such file or directory
+MAKE_RESTARTS=2
+recurse MAKE_RESTARTS=
+#MAKE#[1]: Entering directory '#PWD#'
+MAKE_RESTARTS=
+all MAKE_RESTARTS=
+#MAKE#[1]: Leaving directory '#PWD#'");
+
+rmfiles('foo.x', 'bar.x');
+
+1;
diff --git a/tests/scripts/variables/MFILE_LIST b/tests/scripts/variables/MFILE_LIST
new file mode 100644
index 0000000..076e42d
--- /dev/null
+++ b/tests/scripts/variables/MFILE_LIST
@@ -0,0 +1,30 @@
+#                                                                    -*-perl-*-
+
+$description = "Test the MAKEFILE_LIST variable.";
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE,"> $makefile");
+print MAKEFILE <<EOF;
+m1 := \$(MAKEFILE_LIST)
+include $makefile2
+m3 := \$(MAKEFILE_LIST)
+
+all:
+\t\@echo \$(m1)
+\t\@echo \$(m2)
+\t\@echo \$(m3)
+EOF
+close(MAKEFILE);
+
+
+open(MAKEFILE,"> $makefile2");
+print MAKEFILE "m2 := \$(MAKEFILE_LIST)\n";
+close(MAKEFILE);
+
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "$makefile\n$makefile $makefile2\n$makefile $makefile2\n";
+&compare_output($answer,&get_logfile(1));
+
+1;
diff --git a/tests/scripts/variables/SHELL b/tests/scripts/variables/SHELL
new file mode 100644
index 0000000..1d01ba3
--- /dev/null
+++ b/tests/scripts/variables/SHELL
@@ -0,0 +1,103 @@
+#                                                                    -*-perl-*-
+
+$description = "Test proper handling of SHELL.";
+
+# Find the default value when SHELL is not set.  On UNIX it will be /bin/sh,
+# but on other platforms who knows?
+resetENV();
+delete $ENV{SHELL};
+$mshell = `echo 'all:;\@echo \$(SHELL)' | $make_path -f-`;
+chop $mshell;
+
+# According to POSIX, the value of SHELL in the environment has no impact on
+# the value in the makefile.
+# Note %extraENV takes precedence over the default value for the shell.
+
+$extraENV{SHELL} = '/dev/null';
+run_make_test('all:;@echo "$(SHELL)"', '', $mshell);
+
+# According to POSIX, any value of SHELL set in the makefile should _NOT_ be
+# exported to the subshell!  I wanted to set SHELL to be $^X (perl) in the
+# makefile, but make runs $(SHELL) -c 'commandline' and that doesn't work at
+# all when $(SHELL) is perl :-/.  So, we just add an extra initial /./ which
+# works well on UNIX and seems to work OK on at least some non-UNIX systems.
+
+$extraENV{SHELL} = $mshell;
+
+run_make_test("SHELL := /./$mshell\n".'
+all:;@echo "$(SHELL) $$SHELL"
+', '', "/./$mshell $mshell");
+
+# As a GNU make extension, if make's SHELL variable is explicitly exported,
+# then we really _DO_ export it.
+
+$extraENV{SHELL} = $mshell;
+
+run_make_test("export SHELL := /./$mshell\n".'
+all:;@echo "$(SHELL) $$SHELL"
+', '', "/./$mshell /./$mshell");
+
+
+# Test out setting of SHELL, both exported and not, as a target-specific
+# variable.
+
+$extraENV{SHELL} = $mshell;
+
+run_make_test("all: SHELL := /./$mshell\n".'
+all:;@echo "$(SHELL) $$SHELL"
+', '', "/./$mshell $mshell");
+
+$extraENV{SHELL} = $mshell;
+
+run_make_test("
+SHELL := /././$mshell
+one: two
+two: export SHELL := /./$mshell\n".'
+one two:;@echo "$@: $(SHELL) $$SHELL"
+', '', "two: /./$mshell /./$mshell\none: /././$mshell $mshell\n");
+
+# Test .SHELLFLAGS
+
+# We don't know the output here: on Solaris for example, every line printed
+# by the shell in -x mode has a trailing space (!!)
+my $script = 'true; true';
+my $flags = '-xc';
+my $out = `/bin/sh $flags '$script' 2>&1`;
+
+run_make_test(qq!
+.SHELLFLAGS = $flags
+all: ; \@$script
+!,
+              '', $out);
+
+# Do it again but add spaces to SHELLFLAGS
+
+# Some shells (*shakes fist at Solaris*) cannot handle multiple flags in
+# separate arguments.
+my $t = `/bin/sh -e -c true 2>/dev/null`;
+my $multi_ok = $? == 0;
+
+if ($multi_ok) {
+    $flags = '-x -c';
+    run_make_test(qq!
+.SHELLFLAGS = $flags
+all: ; \@$script
+!,
+              '', $out);
+}
+
+# We can't just use "false" because on different systems it provides a
+# different exit code--once again Solaris: false exits with 255 not 1
+$script = 'true; false; true';
+$flags = '-xec';
+$out = `/bin/sh $flags '$script' 2>&1`;
+my $err = $? >> 8;
+
+run_make_test(qq!
+.SHELLFLAGS = $flags
+all: ; \@$script
+!,
+              '', "$out#MAKEFILE#:3: recipe for target 'all' failed
+#MAKE#: *** [all] Error $err\n", 512);
+
+1;
diff --git a/tests/scripts/variables/automatic b/tests/scripts/variables/automatic
new file mode 100644
index 0000000..33c482d
--- /dev/null
+++ b/tests/scripts/variables/automatic
@@ -0,0 +1,122 @@
+#                                                                    -*-perl-*-
+
+$description = "Test automatic variable setting.";
+
+$details = "";
+
+use Cwd;
+
+$dir = cwd;
+$dir =~ s,.*/([^/]+)$,../$1,;
+
+open(MAKEFILE, "> $makefile");
+print MAKEFILE "dir = $dir\n";
+print MAKEFILE <<'EOF';
+.SUFFIXES:
+.SUFFIXES: .x .y .z
+$(dir)/foo.x : baz.z $(dir)/bar.y baz.z
+	@echo '$$@ = $@, $$(@D) = $(@D), $$(@F) = $(@F)'
+	@echo '$$* = $*, $$(*D) = $(*D), $$(*F) = $(*F)'
+	@echo '$$< = $<, $$(<D) = $(<D), $$(<F) = $(<F)'
+	@echo '$$^ = $^, $$(^D) = $(^D), $$(^F) = $(^F)'
+	@echo '$$+ = $+, $$(+D) = $(+D), $$(+F) = $(+F)'
+	@echo '$$? = $?, $$(?D) = $(?D), $$(?F) = $(?F)'
+	touch $@
+
+$(dir)/bar.y baz.z : ; touch $@
+EOF
+close(MAKEFILE);
+
+# TEST #0 -- simple test
+# -------
+
+# Touch these into the past
+&utouch(-10, qw(foo.x baz.z));
+
+&run_make_with_options($makefile, "", &get_logfile);
+$answer = "touch $dir/bar.y
+\$\@ = $dir/foo.x, \$(\@D) = $dir, \$(\@F) = foo.x
+\$* = $dir/foo, \$(*D) = $dir, \$(*F) = foo
+\$< = baz.z, \$(<D) = ., \$(<F) = baz.z
+\$^ = baz.z $dir/bar.y, \$(^D) = . $dir, \$(^F) = baz.z bar.y
+\$+ = baz.z $dir/bar.y baz.z, \$(+D) = . $dir ., \$(+F) = baz.z bar.y baz.z
+\$? = $dir/bar.y, \$(?D) = $dir, \$(?F) = bar.y
+touch $dir/foo.x\n";
+&compare_output($answer, &get_logfile(1));
+
+unlink(qw(foo.x bar.y baz.z));
+
+# TEST #1 -- test the SysV emulation of $$@ etc.
+# -------
+
+$makefile2 = &get_tmpfile;
+
+open(MAKEFILE, "> $makefile2");
+print MAKEFILE "dir = $dir\n";
+print MAKEFILE <<'EOF';
+.SECONDEXPANSION:
+.SUFFIXES:
+.DEFAULT: ; @echo '$@'
+
+$(dir)/foo $(dir)/bar: $@.x $$@.x $$$@.x $$$$@.x $$(@D).x $$(@F).x
+
+$(dir)/x.z $(dir)/y.z: $(dir)/%.z : $@.% $$@.% $$$@.% $$$$@.% $$(@D).% $$(@F).%
+
+$(dir)/biz: $$(@).x $${@}.x $${@D}.x $${@F}.x
+EOF
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile2, "$dir/foo $dir/bar", &get_logfile);
+$answer = ".x\n$dir/foo.x\nx\n\$@.x\n$dir.x\nfoo.x\n$dir/bar.x\nbar.x\n";
+&compare_output($answer, &get_logfile(1));
+
+&run_make_with_options($makefile2, "$dir/x.z $dir/y.z", &get_logfile);
+$answer = ".x\n$dir/x.z.x\nx\n\$@.x\n$dir.x\nx.z.x\n.y\n$dir/y.z.y\n\y\n\$@.y\n$dir.y\ny.z.y\n";
+&compare_output($answer, &get_logfile(1));
+
+&run_make_with_options($makefile2, "$dir/biz", &get_logfile);
+$answer = "$dir/biz.x\n$dir.x\nbiz.x\n";
+&compare_output($answer, &get_logfile(1));
+
+# TEST #2 -- test for Savannah bug #12320.
+#
+run_make_test('
+.SUFFIXES: .b .src
+
+mbr.b: mbr.src
+	@echo $*
+
+mbr.src: ; @:',
+              '',
+              'mbr');
+
+# TEST #3 -- test for Savannah bug #8154
+# Make sure that nonexistent prerequisites are listed in $?, since they are
+# considered reasons for the target to be rebuilt.
+#
+# See also Savannah bugs #16002 and #16051.
+
+touch('foo');
+
+run_make_test('
+foo: bar ; @echo "\$$? = $?"
+bar: ;',
+              '',
+              '$? = bar');
+
+unlink('foo');
+
+# TEST #4: ensure prereq ordering is correct when the commmand target has none
+# See Savannah bug #21198
+
+run_make_test('
+all : A B
+all : ; @echo $@ -- $^ -- $<
+all : C D
+all : E F
+A B C D E F G H : ; @:
+',
+              '', "all -- A B C D E F -- A\n");
+
+1;
diff --git a/tests/scripts/variables/define b/tests/scripts/variables/define
new file mode 100644
index 0000000..7324cbc
--- /dev/null
+++ b/tests/scripts/variables/define
@@ -0,0 +1,282 @@
+#                                                                    -*-perl-*-
+
+$description = "Test define/endef variable assignments.";
+
+$details = "";
+
+# TEST 0: old-style basic define/endef
+
+run_make_test('
+define multi
+@echo hi
+echo there
+endef
+
+all: ; $(multi)
+',
+              '', "hi\necho there\nthere\n");
+
+# TEST 1: Various new-style define/endef
+
+run_make_test('
+FOO = foo
+
+define multi =
+echo hi
+@echo $(FOO)
+endef # this is the end
+
+define simple :=
+@echo $(FOO)
+endef
+
+define posix ::=
+@echo $(FOO)
+endef
+
+append = @echo a
+
+define append +=
+
+@echo b
+endef
+
+define cond ?= # this is a conditional
+@echo first
+endef
+
+define cond ?=
+@echo second
+endef
+
+FOO = there
+
+all: ; $(multi)
+	$(simple)
+	$(posix)
+	$(append)
+	$(cond)
+',
+              '', "echo hi\nhi\nthere\nfoo\nfoo\na\nb\nfirst\n");
+
+# TEST 1a: Various new-style define/endef, with no spaces
+
+run_make_test('
+FOO = foo
+
+define multi=
+echo hi
+@echo $(FOO)
+endef # this is the end
+
+define simple:=
+@echo $(FOO)
+endef
+
+define posix::=
+@echo $(FOO)
+endef
+
+append = @echo a
+
+define append+=
+
+@echo b
+endef
+
+define cond?= # this is a conditional
+@echo first
+endef
+
+define cond?=
+@echo second
+endef
+
+FOO = there
+
+all: ; $(multi)
+	$(simple)
+	$(posix)
+	$(append)
+	$(cond)
+',
+              '', "echo hi\nhi\nthere\nfoo\nfoo\na\nb\nfirst\n");
+
+# TEST 2: define in true section of conditional (containing conditional)
+
+run_make_test('
+FOO = foo
+NAME = def
+def =
+ifdef BOGUS
+ define  $(subst e,e,$(NAME))     =
+  ifeq (1,1)
+   FOO = bar
+  endif
+ endef
+endif
+
+$(eval $(def))
+all: ; @echo $(FOO)
+',
+              'BOGUS=1', "bar\n");
+
+# TEST 3: define in false section of conditional (containing conditional)
+
+run_make_test(undef, '', "foo\n");
+
+# TEST 4: nested define (supported?)
+
+run_make_test('
+define outer
+ define inner
+  A = B
+ endef
+endef
+
+$(eval $(outer))
+
+outer: ; @echo $(inner)
+',
+              '', "A = B\n");
+
+# TEST 5: NEGATIVE: Missing variable name
+
+run_make_test('
+NAME =
+define $(NAME)  =
+ouch
+endef
+all: ; @echo ouch
+',
+              '', "#MAKEFILE#:3: *** empty variable name.  Stop.\n", 512);
+
+# TEST 6: NEGATIVE: extra text after define
+
+run_make_test('
+NAME =
+define NAME = $(NAME)
+ouch
+endef
+all: ; @echo ok
+',
+              '', "#MAKEFILE#:3: extraneous text after 'define' directive\nok\n");
+
+# TEST 7: NEGATIVE: extra text after endef
+
+run_make_test('
+NAME =
+define NAME =
+ouch
+endef $(NAME)
+all: ; @echo ok
+',
+              '', "#MAKEFILE#:5: extraneous text after 'endef' directive\nok\n");
+
+# TEST 8: NEGATIVE: missing endef
+
+run_make_test('
+NAME =
+all: ; @echo ok
+define NAME =
+ouch
+endef$(NAME)
+',
+              '', "#MAKEFILE#:4: *** missing 'endef', unterminated 'define'.  Stop.\n", 512);
+
+# -------------------------
+# Make sure that prefix characters apply properly to define/endef values.
+#
+# There's a bit of oddness here if you try to use a variable to hold the
+# prefix character for a define.  Even though something like this:
+#
+#       define foo
+#       echo bar
+#       endef
+#
+#       all: ; $(V)$(foo)
+#
+# (where V=@) can be seen by the user to be obviously different than this:
+#
+#       define foo
+#       $(V)echo bar
+#       endef
+#
+#       all: ; $(foo)
+#
+# and the user thinks it should behave the same as when the "@" is literal
+# instead of in a variable, that can't happen because by the time make
+# expands the variables for the command line and sees it begins with a "@" it
+# can't know anymore whether the prefix character came before the variable
+# reference or was included in the first line of the variable reference.
+
+# TEST #5
+# -------
+
+run_make_test('
+define FOO
+$(V1)echo hello
+$(V2)echo world
+endef
+all: ; @$(FOO)
+', '', 'hello
+world');
+
+# TEST #6
+# -------
+
+run_make_test(undef, 'V1=@ V2=@', 'hello
+world');
+
+# TEST #7
+# -------
+
+run_make_test('
+define FOO
+$(V1)echo hello
+$(V2)echo world
+endef
+all: ; $(FOO)
+', 'V1=@', 'hello
+echo world
+world');
+
+# TEST #8
+# -------
+
+run_make_test(undef, 'V2=@', 'echo hello
+hello
+world');
+
+# TEST #9
+# -------
+
+run_make_test(undef, 'V1=@ V2=@', 'hello
+world');
+
+# TEST #10
+# -------
+# Test the basics; a "@" internally to the variable applies to only one line.
+# A "@" before the variable applies to the entire variable.
+
+run_make_test('
+define FOO
+@echo hello
+echo world
+endef
+define BAR
+echo hello
+echo world
+endef
+
+all: foo bar
+foo: ; $(FOO)
+bar: ; @$(BAR)
+', '', 'hello
+echo world
+world
+hello
+world
+');
+
+1;
diff --git a/tests/scripts/variables/flavors b/tests/scripts/variables/flavors
new file mode 100644
index 0000000..ba133ea
--- /dev/null
+++ b/tests/scripts/variables/flavors
@@ -0,0 +1,96 @@
+#                                                                    -*-perl-*-
+
+$description = "Test various flavors of make variable setting.";
+
+$details = "";
+
+# TEST 0: Recursive
+
+run_make_test('
+ugh = Goodbye
+foo = $(bar)
+bar = ${ugh}
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Hello\n");
+
+# TEST 1: Simple
+
+run_make_test('
+bar = Goodbye
+foo := $(bar)
+bar = ${ugh}
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Goodbye\n");
+
+# TEST 2: Append to recursive
+
+run_make_test('
+foo = Hello
+ugh = Goodbye
+foo += $(bar)
+bar = ${ugh}
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Hello Hello\n");
+
+# TEST 3: Append to simple
+
+run_make_test('
+foo := Hello
+ugh = Goodbye
+bar = ${ugh}
+foo += $(bar)
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Hello Goodbye\n");
+
+# TEST 4: Conditional pre-set
+
+run_make_test('
+foo = Hello
+ugh = Goodbye
+bar = ${ugh}
+foo ?= $(bar)
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Hello\n");
+
+# TEST 5: Conditional unset
+
+run_make_test('
+ugh = Goodbye
+bar = ${ugh}
+foo ?= $(bar)
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Hello\n");
+
+# TEST 6: Simple using POSIX syntax
+run_make_test('
+bar = Goodbye
+foo ::= $(bar)
+bar = ${ugh}
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Goodbye\n");
+
+# TEST 7: POSIX syntax no spaces
+run_make_test('
+bar = Goodbye
+foo::=$(bar)
+bar = ${ugh}
+ugh = Hello
+all: ; @echo $(foo)
+',
+              '', "Goodbye\n");
+
+1;
diff --git a/tests/scripts/variables/negative b/tests/scripts/variables/negative
new file mode 100644
index 0000000..16a72b8
--- /dev/null
+++ b/tests/scripts/variables/negative
@@ -0,0 +1,46 @@
+#                                                                    -*-perl-*-
+
+$description = "Run some negative tests (things that should fail).";
+
+# TEST #0
+# Check that non-terminated variable references are detected (and
+# reported using the best filename/lineno info
+run_make_test('
+foo = bar
+x = $(foo
+y = $x
+
+all: ; @echo $y
+',
+              '', '#MAKEFILE#:3: *** unterminated variable reference.  Stop.',
+              512);
+
+# TEST #1
+# Bogus variable value passed on the command line.
+run_make_test(undef,
+              'x=\$\(other',
+              '#MAKEFILE#:4: *** unterminated variable reference.  Stop.',
+              512);
+
+# TEST #2
+# Again, but this time while reading the makefile.
+run_make_test('
+foo = bar
+x = $(foo
+y = $x
+
+z := $y
+
+all: ; @echo $y
+',
+              '', '#MAKEFILE#:3: *** unterminated variable reference.  Stop.',
+              512);
+
+# TEST #3
+# Bogus variable value passed on the command line.
+run_make_test(undef,
+              'x=\$\(other',
+              '#MAKEFILE#:4: *** unterminated variable reference.  Stop.',
+              512);
+
+1;
diff --git a/tests/scripts/variables/private b/tests/scripts/variables/private
new file mode 100644
index 0000000..8967ffb
--- /dev/null
+++ b/tests/scripts/variables/private
@@ -0,0 +1,122 @@
+#                                                                    -*-perl-*-
+
+$description = "Test 'private' variables.";
+
+$details = "";
+
+# 1: Simple verification that private variables are not inherited
+&run_make_test('
+a:
+F = g
+a: F = a
+b: private F = b
+
+a b c: ; @echo $@: F=$(F)
+a: b
+b: c
+',
+              '', "c: F=a\nb: F=b\na: F=a\n");
+
+# 2: Again, but this time we start with "b" so "a"'s variable is not in scope
+&run_make_test(undef, 'b', "c: F=g\nb: F=b\n");
+
+# 3: Verification with pattern-specific variables
+&run_make_test('
+t.a:
+
+F1 = g
+F2 = g
+%.a: private F1 = a
+%.a: F2 = a
+
+t.a t.b: ; @echo $@: F1=$(F1) / F2=$(F2)
+t.a: t.b
+',
+               '', "t.b: F1=g / F2=a\nt.a: F1=a / F2=a\n");
+
+# 4: Test private global variables
+&run_make_test('
+a:
+private F = g
+G := $(F)
+a:
+b: F = b
+
+a b: ; @echo $@: F=$(F) / G=$(G)
+a: b
+',
+               '', "b: F=b / G=g\na: F= / G=g\n");
+
+# 5: Multiple conditions on the same variable.  Test export.
+delete $ENV{'_X'};
+&run_make_test('
+_X = x
+a: export override private _X = a
+a: ; @echo _X=$(_X) / _X=$$_X
+',
+               '', "_X=a / _X=a");
+
+# 6: Test override.
+&run_make_test(undef, '_X=c', "_X=a / _X=a\n");
+
+# 7: Ensure keywords still work as targets
+&run_make_test('
+a: export override private foo bar
+foo bar export override private: ; @echo $@
+',
+               '', "export\noverride\nprivate\nfoo\nbar\n");
+
+# 8: Ensure keywords still work as variables
+&run_make_test('
+private = g
+a: private = a
+a: b
+a b: ; @echo $@=$(private)
+',
+               '', "b=a\na=a\n");
+
+# 9: make sure private suppresses inheritance
+run_make_test(q!
+DEFS = FOO
+all: bar1
+bar1: private DEFS += 1
+bar3: private DEFS += 3
+bar1: bar2
+bar2: bar3
+bar1 bar2 bar3: ; @echo '$@: $(DEFS)'
+!,
+              '', "bar3: FOO 3\nbar2: FOO\nbar1: FOO 1\n");
+
+# 10: Test append with pattern-specific variables and private
+
+run_make_test(q!
+IA = global
+PA = global
+PS = global
+S = global
+PS = global
+SV = global
+b%: IA += b%
+b%: private PA += b%
+b%: private PS = b%
+bar: all
+bar: IA += bar
+bar: private PA += bar
+bar: private PS = bar
+a%: IA += a%
+a%: private PA += a%
+a%: private PS = a%
+all: IA += all
+all: private PA += all
+all: private PS = all
+
+bar all: ; @echo '$@: IA=$(IA)'; echo '$@: PA=$(PA)'; echo '$@: PS=$(PS)'
+!,
+              '', "all: IA=global b% bar a% all
+all: PA=global a% all
+all: PS=all
+bar: IA=global b% bar
+bar: PA=global b% bar
+bar: PS=bar\n");
+
+1;
diff --git a/tests/scripts/variables/special b/tests/scripts/variables/special
new file mode 100644
index 0000000..a5ab93a
--- /dev/null
+++ b/tests/scripts/variables/special
@@ -0,0 +1,141 @@
+#                                                                    -*-perl-*-
+
+$description = "Test special GNU make variables.";
+
+$details = "";
+
+&run_make_test('
+
+X1 := $(sort $(filter FOO BAR,$(.VARIABLES)))
+
+FOO := foo
+
+X2 := $(sort $(filter FOO BAR,$(.VARIABLES)))
+
+BAR := bar
+
+all:
+	@echo X1 = $(X1)
+	@echo X2 = $(X2)
+	@echo LAST = $(sort $(filter FOO BAR,$(.VARIABLES)))
+',
+               '', "X1 =\nX2 = FOO\nLAST = BAR FOO\n");
+
+
+
+# $makefile2 = &get_tmpfile;
+# open(MAKEFILE, "> $makefile2");
+
+# print MAKEFILE <<'EOF';
+
+# X1 := $(sort $(.TARGETS))
+
+# all: foo
+# 	@echo X1 = $(X1)
+# 	@echo X2 = $(X2)
+# 	@echo LAST = $(sort $(.TARGETS))
+
+# X2 := $(sort $(.TARGETS))
+
+# foo:
+
+# EOF
+
+# close(MAKEFILE);
+
+# # TEST #2
+# # -------
+
+# &run_make_with_options($makefile2, "", &get_logfile);
+# $answer = "X1 =\nX2 = all\nLAST = all foo\n";
+# &compare_output($answer, &get_logfile(1));
+
+# Test the .RECIPEPREFIX variable
+&run_make_test('
+define foo
+: foo-one\
+foo-two
+: foo-three
+	: foo-four
+endef
+
+orig: ; : orig-one
+	: orig-two \
+orig-three \
+	orig-four \
+		orig-five \\\\
+	: orig-six
+	$(foo)
+
+.RECIPEPREFIX = >
+test: ; : test-one
+>: test-two \
+test-three \
+>test-four \
+>	test-five \\\\
+>: test-six
+>$(foo)
+
+.RECIPEPREFIX =
+reset: ; : reset-one
+	: reset-two \
+reset-three \
+	reset-four \
+		reset-five \\\\
+	: reset-six
+	$(foo)
+',
+               'orig test reset',
+               ': orig-one
+: orig-two \
+orig-three \
+orig-four \
+	orig-five \\\\
+: orig-six
+: foo-one foo-two
+: foo-three
+: foo-four
+: test-one
+: test-two \
+test-three \
+test-four \
+	test-five \\\\
+: test-six
+: foo-one foo-two
+: foo-three
+: foo-four
+: reset-one
+: reset-two \
+reset-three \
+reset-four \
+	reset-five \\\\
+: reset-six
+: foo-one foo-two
+: foo-three
+: foo-four');
+
+# Test that the "did you mean TAB" message is printed properly
+
+run_make_test(q!
+$x.
+!,
+              '', '#MAKEFILE#:2: *** missing separator.  Stop.', 512);
+
+run_make_test(q!
+foo:
+        bar
+!,
+              '', '#MAKEFILE#:3: *** missing separator (did you mean TAB instead of 8 spaces?).  Stop.', 512);
+
+run_make_test(q!
+.RECIPEPREFIX = :
+foo:
+        bar
+!,
+              '', '#MAKEFILE#:4: *** missing separator.  Stop.', 512);
+
+1;
+
+### Local Variables:
+### eval: (setq whitespace-action (delq 'auto-cleanup whitespace-action))
+### End:
diff --git a/tests/scripts/variables/undefine b/tests/scripts/variables/undefine
new file mode 100644
index 0000000..38707b8
--- /dev/null
+++ b/tests/scripts/variables/undefine
@@ -0,0 +1,73 @@
+#                                                                    -*-perl-*-
+
+$description = "Test variable undefine.";
+
+$details = "";
+
+# TEST 0: basic undefine functionality
+
+run_make_test('
+a = a
+b := b
+define c
+c
+endef
+
+$(info $(flavor a) $(flavor b) $(flavor c))
+
+n := b
+
+undefine a
+undefine $n
+undefine c
+
+$(info $(flavor a) $(flavor b) $(flavor c))
+
+
+all: ;@:
+',
+'', "recursive simple recursive\nundefined undefined undefined");
+
+
+# TEST 1: override
+
+run_make_test('
+undefine a
+override undefine b
+
+$(info $(flavor a) $(flavor b))
+
+
+all: ;@:
+',
+'a=a b=b', "recursive undefined");
+
+1;
+
+# TEST 2: undefine in eval (make sure we undefine from the global var set)
+
+run_make_test('
+define undef
+$(eval undefine $$1)
+endef
+
+a := a
+$(call undef,a)
+$(info $(flavor a))
+
+
+all: ;@:
+',
+'', "undefined");
+
+
+# TEST 3: Missing variable name
+
+run_make_test('
+a =
+undefine $a
+all: ;@echo ouch
+',
+'', "#MAKEFILE#:3: *** empty variable name.  Stop.\n", 512);
+
+1;
diff --git a/tests/test_driver.pl b/tests/test_driver.pl
new file mode 100644
index 0000000..91141eb
--- /dev/null
+++ b/tests/test_driver.pl
@@ -0,0 +1,1474 @@
+#!/usr/bin/perl
+# -*-perl-*-
+#
+# Modification history:
+# Written 91-12-02 through 92-01-01 by Stephen McGee.
+# Modified 92-02-11 through 92-02-22 by Chris Arthur to further generalize.
+#
+# Copyright (C) 1991-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# Test driver routines used by a number of test suites, including
+# those for SCS, make, roll_dir, and scan_deps (?).
+#
+# this routine controls the whole mess; each test suite sets up a few
+# variables and then calls &toplevel, which does all the real work.
+
+# $Id$
+
+
+# The number of test categories we've run
+$categories_run = 0;
+# The number of test categroies that have passed
+$categories_passed = 0;
+# The total number of individual tests that have been run
+$total_tests_run = 0;
+# The total number of individual tests that have passed
+$total_tests_passed = 0;
+# The number of tests in this category that have been run
+$tests_run = 0;
+# The number of tests in this category that have passed
+$tests_passed = 0;
+
+
+# Yeesh.  This whole test environment is such a hack!
+$test_passed = 1;
+
+# Timeout in seconds.  If the test takes longer than this we'll fail it.
+$test_timeout = 5;
+$test_timeout = 10 if $^O eq 'VMS';
+
+# Path to Perl
+$perl_name = $^X;
+
+# %makeENV is the cleaned-out environment.
+%makeENV = ();
+
+# %extraENV are any extra environment variables the tests might want to set.
+# These are RESET AFTER EVERY TEST!
+%extraENV = ();
+
+sub vms_get_process_logicals {
+  # Sorry for the long note here, but to keep this test running on
+  # VMS, it is needed to be understood.
+  #
+  # Perl on VMS by default maps the %ENV array to the system wide logical
+  # name table.
+  #
+  # This is a very large dynamically changing table.
+  # On Linux, this would be the equivalent of a table that contained
+  # every mount point, temporary pipe, and symbolic link on every
+  # file system.  You normally do not have permission to clear or replace it,
+  # and if you did, the results would be catastrophic.
+  #
+  # On VMS, added/changed %ENV items show up in the process logical
+  # name table.  So to track changes, a copy of it needs to be captured.
+
+  my $raw_output = `show log/process/access_mode=supervisor`;
+  my @raw_output_lines = split('\n',$raw_output);
+  my %log_hash;
+  foreach my $line (@raw_output_lines) {
+    if ($line =~ /^\s+"([A-Za-z\$_]+)"\s+=\s+"(.+)"$/) {
+      $log_hash{$1} = $2;
+    }
+  }
+  return \%log_hash
+}
+
+# %origENV is the caller's original environment
+if ($^O ne 'VMS') {
+  %origENV = %ENV;
+} else {
+  my $proc_env = vms_get_process_logicals;
+  %origENV = %{$proc_env};
+}
+
+sub resetENV
+{
+  # We used to say "%ENV = ();" but this doesn't work in Perl 5.000
+  # through Perl 5.004.  It was fixed in Perl 5.004_01, but we don't
+  # want to require that here, so just delete each one individually.
+
+  if ($^O ne 'VMS') {
+    foreach $v (keys %ENV) {
+      delete $ENV{$v};
+    }
+
+    %ENV = %makeENV;
+  } else {
+    my $proc_env = vms_get_process_logicals();
+    my %delta = %{$proc_env};
+    foreach my $v (keys %delta) {
+      if (exists $origENV{$v}) {
+        if ($origENV{$v} ne $delta{$v}) {
+          $ENV{$v} = $origENV{$v};
+        }
+      } else {
+        delete $ENV{$v};
+      }
+    }
+  }
+
+  foreach $v (keys %extraENV) {
+    $ENV{$v} = $extraENV{$v};
+    delete $extraENV{$v};
+  }
+}
+
+sub toplevel
+{
+  # Pull in benign variables from the user's environment
+
+  foreach (# UNIX-specific things
+           'TZ', 'TMPDIR', 'HOME', 'USER', 'LOGNAME', 'PATH',
+           'LD_LIBRARY_PATH',
+           # Purify things
+           'PURIFYOPTIONS',
+           # Windows NT-specific stuff
+           'Path', 'SystemRoot',
+           # DJGPP-specific stuff
+           'DJDIR', 'DJGPP', 'SHELL', 'COMSPEC', 'HOSTNAME', 'LFN',
+           'FNCASE', '387', 'EMU387', 'GROUP'
+          ) {
+    $makeENV{$_} = $ENV{$_} if $ENV{$_};
+  }
+
+  # Make sure our compares are not foiled by locale differences
+
+  $makeENV{LC_ALL} = 'C';
+
+  # Replace the environment with the new one
+  #
+  %origENV = %ENV unless $^O eq 'VMS';
+
+  resetENV();
+
+  $| = 1;                     # unbuffered output
+
+  $debug = 0;                 # debug flag
+  $profile = 0;               # profiling flag
+  $verbose = 0;               # verbose mode flag
+  $detail = 0;                # detailed verbosity
+  $keep = 0;                  # keep temp files around
+  $workdir = "work";          # The directory where the test will start running
+  $scriptdir = "scripts";     # The directory where we find the test scripts
+  $tmpfilesuffix = "t";       # the suffix used on tmpfiles
+  $default_output_stack_level = 0;  # used by attach_default_output, etc.
+  $default_input_stack_level = 0;   # used by attach_default_input, etc.
+  $cwd = ".";                 # don't we wish we knew
+  $cwdslash = "";             # $cwd . $pathsep, but "" rather than "./"
+
+  &get_osname;  # sets $osname, $vos, $pathsep, and $short_filenames
+
+  &set_defaults;  # suite-defined
+
+  &parse_command_line (@ARGV);
+
+  print "OS name = '$osname'\n" if $debug;
+
+  $workpath = "$cwdslash$workdir";
+  $scriptpath = "$cwdslash$scriptdir";
+
+  &set_more_defaults;  # suite-defined
+
+  &print_banner;
+
+  if ($osname eq 'VMS' && $cwdslash eq "")
+  {
+    # Porting this script to VMS revealed a small bug in opendir() not
+    # handling search lists correctly when the directory only exists in
+    # one of the logical_devices.  Need to find the first directory in
+    # the search list, as that is where things will be written to.
+    my @dirs = split("/", $pwd);
+
+    my $logical_device = $ENV{$dirs[1]};
+    if ($logical_device =~ /([A-Za-z0-9_]+):(:?.+:)+/)
+    {
+        # A search list was found.  Grab the first logical device
+        # and use it instead of the search list.
+        $dirs[1]=$1;
+        my $lcl_pwd = join('/', @dirs);
+        $workpath = $lcl_pwd . '/' . $workdir
+    }
+  }
+
+  if (-d $workpath)
+  {
+    print "Clearing $workpath...\n";
+    &remove_directory_tree("$workpath/")
+          || &error ("Couldn't wipe out $workpath\n");
+  }
+  else
+  {
+    mkdir ($workpath, 0777) || &error ("Couldn't mkdir $workpath: $!\n");
+  }
+
+  if (!-d $scriptpath)
+  {
+    &error ("Failed to find $scriptpath containing perl test scripts.\n");
+  }
+
+  if (@TESTS)
+  {
+    print "Making work dirs...\n";
+    foreach $test (@TESTS)
+    {
+      if ($test =~ /^([^\/]+)\//)
+      {
+        $dir = $1;
+        push (@rmdirs, $dir);
+        -d "$workpath/$dir"
+           || mkdir ("$workpath/$dir", 0777)
+           || &error ("Couldn't mkdir $workpath/$dir: $!\n");
+      }
+    }
+  }
+  else
+  {
+    print "Finding tests...\n";
+    opendir (SCRIPTDIR, $scriptpath)
+        || &error ("Couldn't opendir $scriptpath: $!\n");
+    @dirs = grep (!/^(\..*|CVS|RCS)$/, readdir (SCRIPTDIR) );
+    closedir (SCRIPTDIR);
+    foreach $dir (@dirs)
+    {
+      next if ($dir =~ /^(\..*|CVS|RCS)$/ || ! -d "$scriptpath/$dir");
+      push (@rmdirs, $dir);
+      # VMS can have overlayed file systems, so directories may repeat.
+      next if -d "$workpath/$dir";
+      mkdir ("$workpath/$dir", 0777)
+          || &error ("Couldn't mkdir $workpath/$dir: $!\n");
+      opendir (SCRIPTDIR, "$scriptpath/$dir")
+          || &error ("Couldn't opendir $scriptpath/$dir: $!\n");
+      @files = grep (!/^(\..*|CVS|RCS|.*~)$/, readdir (SCRIPTDIR) );
+      closedir (SCRIPTDIR);
+      foreach $test (@files)
+      {
+        -d $test and next;
+        push (@TESTS, "$dir/$test");
+      }
+    }
+  }
+
+  if (@TESTS == 0)
+  {
+    &error ("\nNo tests in $scriptpath, and none were specified.\n");
+  }
+
+  print "\n";
+
+  run_all_tests();
+
+  foreach $dir (@rmdirs)
+  {
+    rmdir ("$workpath/$dir");
+  }
+
+  $| = 1;
+
+  $categories_failed = $categories_run - $categories_passed;
+  $total_tests_failed = $total_tests_run - $total_tests_passed;
+
+  if ($total_tests_failed)
+  {
+    print "\n$total_tests_failed Test";
+    print "s" unless $total_tests_failed == 1;
+    print " in $categories_failed Categor";
+    print ($categories_failed == 1 ? "y" : "ies");
+    print " Failed (See .$diffext* files in $workdir dir for details) :-(\n\n";
+    return 0;
+  }
+  else
+  {
+    print "\n$total_tests_passed Test";
+    print "s" unless $total_tests_passed == 1;
+    print " in $categories_passed Categor";
+    print ($categories_passed == 1 ? "y" : "ies");
+    print " Complete ... No Failures :-)\n\n";
+    return 1;
+  }
+}
+
+sub get_osname
+{
+  # Set up an initial value.  In perl5 we can do it the easy way.
+  $osname = defined($^O) ? $^O : '';
+
+  if ($osname eq 'VMS')
+  {
+    $vos = 0;
+    $pathsep = "/";
+    return;
+  }
+
+  # Find a path to Perl
+
+  # See if the filesystem supports long file names with multiple
+  # dots.  DOS doesn't.
+  $short_filenames = 0;
+  (open (TOUCHFD, "> fancy.file.name") && close (TOUCHFD))
+      || ($short_filenames = 1);
+  unlink ("fancy.file.name") || ($short_filenames = 1);
+
+  if (! $short_filenames) {
+    # Thanks go to meyering@cs.utexas.edu (Jim Meyering) for suggesting a
+    # better way of doing this.  (We used to test for existence of a /mnt
+    # dir, but that apparently fails on an SGI Indigo (whatever that is).)
+    # Because perl on VOS translates /'s to >'s, we need to test for
+    # VOSness rather than testing for Unixness (ie, try > instead of /).
+
+    mkdir (".ostest", 0777) || &error ("Couldn't create .ostest: $!\n", 1);
+    open (TOUCHFD, "> .ostest>ick") && close (TOUCHFD);
+    chdir (".ostest") || &error ("Couldn't chdir to .ostest: $!\n", 1);
+  }
+
+  if (! $short_filenames && -f "ick")
+  {
+    $osname = "vos";
+    $vos = 1;
+    $pathsep = ">";
+  }
+  else
+  {
+    # the following is regrettably knarly, but it seems to be the only way
+    # to not get ugly error messages if uname can't be found.
+    # Hmmm, BSD/OS 2.0's uname -a is excessively verbose.  Let's try it
+    # with switches first.
+    eval "chop (\$osname = `sh -c 'uname -nmsr 2>&1'`)";
+    if ($osname =~ /not found/i)
+    {
+        $osname = "(something posixy with no uname)";
+    }
+    elsif ($@ ne "" || $?)
+    {
+        eval "chop (\$osname = `sh -c 'uname -a 2>&1'`)";
+        if ($@ ne "" || $?)
+        {
+            $osname = "(something posixy)";
+        }
+    }
+    $vos = 0;
+    $pathsep = "/";
+  }
+
+  if (! $short_filenames) {
+    chdir ("..") || &error ("Couldn't chdir to ..: $!\n", 1);
+    unlink (".ostest>ick");
+    rmdir (".ostest") || &error ("Couldn't rmdir .ostest: $!\n", 1);
+  }
+}
+
+sub parse_command_line
+{
+  @argv = @_;
+
+  # use @ARGV if no args were passed in
+
+  if (@argv == 0)
+  {
+    @argv = @ARGV;
+  }
+
+  # look at each option; if we don't recognize it, maybe the suite-specific
+  # command line parsing code will...
+
+  while (@argv)
+  {
+    $option = shift @argv;
+    if ($option =~ /^-debug$/i)
+    {
+      print "\nDEBUG ON\n";
+      $debug = 1;
+    }
+    elsif ($option =~ /^-usage$/i)
+    {
+      &print_usage;
+      exit 0;
+    }
+    elsif ($option =~ /^-(h|help)$/i)
+    {
+      &print_help;
+      exit 0;
+    }
+    elsif ($option =~ /^-profile$/i)
+    {
+      $profile = 1;
+    }
+    elsif ($option =~ /^-verbose$/i)
+    {
+      $verbose = 1;
+    }
+    elsif ($option =~ /^-detail$/i)
+    {
+      $detail = 1;
+      $verbose = 1;
+    }
+    elsif ($option =~ /^-keep$/i)
+    {
+      $keep = 1;
+    }
+    elsif (&valid_option($option))
+    {
+      # The suite-defined subroutine takes care of the option
+    }
+    elsif ($option =~ /^-/)
+    {
+      print "Invalid option: $option\n";
+      &print_usage;
+      exit 0;
+    }
+    else # must be the name of a test
+    {
+      $option =~ s/\.pl$//;
+      push(@TESTS,$option);
+    }
+  }
+}
+
+sub max
+{
+  local($num) = shift @_;
+  local($newnum);
+
+  while (@_)
+  {
+    $newnum = shift @_;
+    if ($newnum > $num)
+    {
+      $num = $newnum;
+    }
+  }
+
+  return $num;
+}
+
+sub print_centered
+{
+  local($width, $string) = @_;
+  local($pad);
+
+  if (length ($string))
+  {
+    $pad = " " x ( ($width - length ($string) + 1) / 2);
+    print "$pad$string";
+  }
+}
+
+sub print_banner
+{
+  local($info);
+  local($line);
+  local($len);
+
+  $info = "Running tests for $testee on $osname\n";  # $testee is suite-defined
+  $len = &max (length ($line), length ($testee_version),
+               length ($banner_info), 73) + 5;
+  $line = ("-" x $len) . "\n";
+  if ($len < 78)
+  {
+    $len = 78;
+  }
+
+  &print_centered ($len, $line);
+  &print_centered ($len, $info);
+  &print_centered ($len, $testee_version);  # suite-defined
+  &print_centered ($len, $banner_info);     # suite-defined
+  &print_centered ($len, $line);
+  print "\n";
+}
+
+sub run_all_tests
+{
+    $categories_run = 0;
+
+    $lasttest = '';
+    foreach $testname (sort @TESTS) {
+        # Skip duplicates on VMS caused by logical name search lists.
+        next if $testname eq $lasttest;
+        $lasttest = $testname;
+        $suite_passed = 1;       # reset by test on failure
+        $num_of_logfiles = 0;
+        $num_of_tmpfiles = 0;
+        $description = "";
+        $details = "";
+        $old_makefile = undef;
+        $testname =~ s/^$scriptpath$pathsep//;
+        $perl_testname = "$scriptpath$pathsep$testname";
+        $testname =~ s/(\.pl|\.perl)$//;
+        $testpath = "$workpath$pathsep$testname";
+        # Leave enough space in the extensions to append a number, even
+        # though it needs to fit into 8+3 limits.
+        if ($short_filenames) {
+            $logext = 'l';
+            $diffext = 'd';
+            $baseext = 'b';
+            $runext = 'r';
+            $extext = '';
+        } else {
+            $logext = 'log';
+            $diffext = 'diff';
+            $baseext = 'base';
+            $runext = 'run';
+            $extext = '.';
+        }
+        $extext = '_' if $^O eq 'VMS';
+        $log_filename = "$testpath.$logext";
+        $diff_filename = "$testpath.$diffext";
+        $base_filename = "$testpath.$baseext";
+        $run_filename = "$testpath.$runext";
+        $tmp_filename = "$testpath.$tmpfilesuffix";
+
+        setup_for_test();
+
+        $output = "........................................................ ";
+
+        substr($output,0,length($testname)) = "$testname ";
+
+        print $output;
+
+        $tests_run = 0;
+        $tests_passed = 0;
+
+        # Run the test!
+        $code = do $perl_testname;
+
+        ++$categories_run;
+        $total_tests_run += $tests_run;
+        $total_tests_passed += $tests_passed;
+
+        # How did it go?
+        if (!defined($code)) {
+            # Failed to parse or called die
+            if (length ($@)) {
+                warn "\n*** Test died ($testname): $@\n";
+            } else {
+                warn "\n*** Couldn't parse $perl_testname\n";
+            }
+            $status = "FAILED ($tests_passed/$tests_run passed)";
+        }
+
+        elsif ($code == -1) {
+            # Skipped... not supported
+            $status = "N/A";
+            --$categories_run;
+        }
+
+        elsif ($code != 1) {
+            # Bad result... this shouldn't really happen.  Usually means that
+            # the suite forgot to end with "1;".
+            warn "\n*** Test returned $code\n";
+            $status = "FAILED ($tests_passed/$tests_run passed)";
+        }
+
+        elsif ($tests_run == 0) {
+            # Nothing was done!!
+            $status = "FAILED (no tests found!)";
+        }
+
+        elsif ($tests_run > $tests_passed) {
+            # Lose!
+            $status = "FAILED ($tests_passed/$tests_run passed)";
+        }
+
+        else {
+            # Win!
+            ++$categories_passed;
+            $status = "ok     ($tests_passed passed)";
+
+            # Clean up
+            for ($i = $num_of_tmpfiles; $i; $i--) {
+                rmfiles($tmp_filename . num_suffix($i));
+            }
+            for ($i = $num_of_logfiles ? $num_of_logfiles : 1; $i; $i--) {
+                rmfiles($log_filename . num_suffix($i));
+                rmfiles($base_filename . num_suffix($i));
+            }
+        }
+
+        # If the verbose option has been specified, then a short description
+        # of each test is printed before displaying the results of each test
+        # describing WHAT is being tested.
+
+        if ($verbose) {
+            if ($detail) {
+                print "\nWHAT IS BEING TESTED\n";
+                print "--------------------";
+            }
+            print "\n\n$description\n\n";
+        }
+
+        # If the detail option has been specified, then the details of HOW
+        # the test is testing what it says it is testing in the verbose output
+        # will be displayed here before the results of the test are displayed.
+
+        if ($detail) {
+            print "\nHOW IT IS TESTED\n";
+            print "----------------";
+            print "\n\n$details\n\n";
+        }
+
+        print "$status\n";
+    }
+}
+
+# If the keep flag is not set, this subroutine deletes all filenames that
+# are sent to it.
+
+sub rmfiles
+{
+  local(@files) = @_;
+
+  if (!$keep)
+  {
+    return (unlink @files);
+  }
+
+  return 1;
+}
+
+sub print_standard_usage
+{
+  local($plname,@moreusage) = @_;
+  local($line);
+
+  print "usage:\t$plname [testname] [-verbose] [-detail] [-keep]\n";
+  print "\t\t\t[-profile] [-usage] [-help] [-debug]\n";
+  foreach (@moreusage) {
+    print "\t\t\t$_\n";
+  }
+}
+
+sub print_standard_help
+{
+  local(@morehelp) = @_;
+  local($line);
+  local($tline);
+  local($t) = "      ";
+
+  $line = "Test Driver For $testee";
+  print "$line\n";
+  $line = "=" x length ($line);
+  print "$line\n";
+
+  &print_usage;
+
+  print "\ntestname\n"
+      . "${t}You may, if you wish, run only ONE test if you know the name\n"
+      . "${t}of that test and specify this name anywhere on the command\n"
+      . "${t}line.  Otherwise ALL existing tests in the scripts directory\n"
+      . "${t}will be run.\n"
+      . "-verbose\n"
+      . "${t}If this option is given, a description of every test is\n"
+      . "${t}displayed before the test is run. (Not all tests may have\n"
+      . "${t}descriptions at this time)\n"
+      . "-detail\n"
+      . "${t}If this option is given, a detailed description of every\n"
+      . "${t}test is displayed before the test is run. (Not all tests\n"
+      . "${t}have descriptions at this time)\n"
+      . "-profile\n"
+      . "${t}If this option is given, then the profile file\n"
+      . "${t}is added to other profiles every time $testee is run.\n"
+      . "${t}This option only works on VOS at this time.\n"
+      . "-keep\n"
+      . "${t}You may give this option if you DO NOT want ANY\n"
+      . "${t}of the files generated by the tests to be deleted. \n"
+      . "${t}Without this option, all files generated by the test will\n"
+      . "${t}be deleted IF THE TEST PASSES.\n"
+      . "-debug\n"
+      . "${t}Use this option if you would like to see all of the system\n"
+      . "${t}calls issued and their return status while running the tests\n"
+      . "${t}This can be helpful if you're having a problem adding a test\n"
+      . "${t}to the suite, or if the test fails!\n";
+
+  foreach $line (@morehelp)
+  {
+    $tline = $line;
+    if (substr ($tline, 0, 1) eq "\t")
+    {
+      substr ($tline, 0, 1) = $t;
+    }
+    print "$tline\n";
+  }
+}
+
+#######################################################################
+###########         Generic Test Driver Subroutines         ###########
+#######################################################################
+
+sub get_caller
+{
+  local($depth);
+  local($package);
+  local($filename);
+  local($linenum);
+
+  $depth = defined ($_[0]) ? $_[0] : 1;
+  ($package, $filename, $linenum) = caller ($depth + 1);
+  return "$filename: $linenum";
+}
+
+sub error
+{
+  local($message) = $_[0];
+  local($caller) = &get_caller (1);
+
+  if (defined ($_[1]))
+  {
+    $caller = &get_caller ($_[1] + 1) . " -> $caller";
+  }
+
+  die "$caller: $message";
+}
+
+sub compare_output
+{
+  local($answer,$logfile) = @_;
+  local($slurp, $answer_matched) = ('', 0);
+
+  ++$tests_run;
+
+  if (! defined $answer) {
+      print "Ignoring output ........ " if $debug;
+      $answer_matched = 1;
+  } else {
+      print "Comparing Output ........ " if $debug;
+
+      $slurp = &read_file_into_string ($logfile);
+
+      # For make, get rid of any time skew error before comparing--too bad this
+      # has to go into the "generic" driver code :-/
+      $slurp =~ s/^.*modification time .*in the future.*\n//gm;
+      $slurp =~ s/^.*Clock skew detected.*\n//gm;
+
+      if ($slurp eq $answer) {
+          $answer_matched = 1;
+      } else {
+          # See if it is a slash or CRLF problem
+          local ($answer_mod, $slurp_mod) = ($answer, $slurp);
+
+          $answer_mod =~ tr,\\,/,;
+          $answer_mod =~ s,\r\n,\n,gs;
+
+          $slurp_mod =~ tr,\\,/,;
+          $slurp_mod =~ s,\r\n,\n,gs;
+
+          $answer_matched = ($slurp_mod eq $answer_mod);
+          if ($^O eq 'VMS') {
+
+            # VMS has extra blank lines in output sometimes.
+            # Ticket #41760
+            if (!$answer_matched) {
+              $slurp_mod =~ s/\n\n+/\n/gm;
+              $slurp_mod =~ s/\A\n+//g;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS adding a "Waiting for unfinished jobs..."
+            # Remove it for now to see what else is going on.
+            if (!$answer_matched) {
+              $slurp_mod =~ s/^.+\*\*\* Waiting for unfinished jobs.+$//m;
+              $slurp_mod =~ s/\n\n/\n/gm;
+              $slurp_mod =~ s/^\n+//gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS wants target device to exist or generates an error,
+            # Some test tagets look like VMS devices and trip this.
+            if (!$answer_matched) {
+              $slurp_mod =~ s/^.+\: no such device or address.*$//gim;
+              $slurp_mod =~ s/\n\n/\n/gm;
+              $slurp_mod =~ s/^\n+//gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS error message has a different case
+            if (!$answer_matched) {
+              $slurp_mod =~ s/no such file /No such file /gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS is putting comas instead of spaces in output
+            if (!$answer_matched) {
+              $slurp_mod =~ s/,/ /gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS Is sometimes adding extra leading spaces to output?
+            if (!$answer_matched) {
+               my $slurp_mod = $slurp_mod;
+               $slurp_mod =~ s/^ +//gm;
+               $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS port not handling POSIX encoded child status
+            # Translate error case it for now.
+            if (!$answer_matched) {
+              $slurp_mod =~ s/0x1035a00a/1/gim;
+              $answer_matched = 1 if $slurp_mod =~ /\Q$answer_mod\E/i;
+
+            }
+            if (!$answer_matched) {
+              $slurp_mod =~ s/0x1035a012/2/gim;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # Tests are using a UNIX null command, temp hack
+            # until this can be handled by the VMS port.
+            # ticket # 41761
+            if (!$answer_matched) {
+              $slurp_mod =~ s/^.+DCL-W-NOCOMD.*$//gim;
+              $slurp_mod =~ s/\n\n+/\n/gm;
+              $slurp_mod =~ s/^\n+//gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+            # Tests are using exit 0;
+            # this generates a warning that should stop the make, but does not
+            if (!$answer_matched) {
+              $slurp_mod =~ s/^.+NONAME-W-NOMSG.*$//gim;
+              $slurp_mod =~ s/\n\n+/\n/gm;
+              $slurp_mod =~ s/^\n+//gm;
+              $answer_matched = ($slurp_mod eq $answer_mod);
+            }
+
+            # VMS is sometimes adding single quotes to output?
+            if (!$answer_matched) {
+              my $noq_slurp_mod = $slurp_mod;
+              $noq_slurp_mod =~ s/\'//gm;
+              $answer_matched = ($noq_slurp_mod eq $answer_mod);
+
+              # And missing an extra space in output
+              if (!$answer_matched) {
+                $noq_answer_mod = $answer_mod;
+                $noq_answer_mod =~ s/\h\h+/ /gm;
+                $answer_matched = ($noq_slurp_mod eq $noq_answer_mod);
+              }
+
+              # VMS adding ; to end of some lines.
+              if (!$answer_matched) {
+                $noq_slurp_mod =~ s/;\n/\n/gm;
+                $answer_matched = ($noq_slurp_mod eq $noq_answer_mod);
+              }
+
+              # VMS adding trailing space to end of some quoted lines.
+              if (!$answer_matched) {
+                $noq_slurp_mod =~ s/\h+\n/\n/gm;
+                $answer_matched = ($noq_slurp_mod eq $noq_answer_mod);
+              }
+
+              # And VMS missing leading blank line
+              if (!$answer_matched) {
+                $noq_answer_mod =~ s/\A\n//g;
+                $answer_matched = ($noq_slurp_mod eq $noq_answer_mod);
+              }
+
+              # Unix double quotes showing up as single quotes on VMS.
+              if (!$answer_matched) {
+                $noq_answer_mod =~ s/\"//g;
+                $answer_matched = ($noq_slurp_mod eq $noq_answer_mod);
+              }
+            }
+          }
+
+          # If it still doesn't match, see if the answer might be a regex.
+          if (!$answer_matched && $answer =~ m,^/(.+)/$,) {
+              $answer_matched = ($slurp =~ /$1/);
+              if (!$answer_matched && $answer_mod =~ m,^/(.+)/$,) {
+                  $answer_matched = ($slurp_mod =~ /$1/);
+              }
+          }
+      }
+  }
+
+  if ($answer_matched && $test_passed)
+  {
+    print "ok\n" if $debug;
+    ++$tests_passed;
+    return 1;
+  }
+
+  if (! $answer_matched) {
+    print "DIFFERENT OUTPUT\n" if $debug;
+
+    &create_file (&get_basefile, $answer);
+    &create_file (&get_runfile, $command_string);
+
+    print "\nCreating Difference File ...\n" if $debug;
+
+    # Create the difference file
+
+    local($command) = "diff -c " . &get_basefile . " " . $logfile;
+    &run_command_with_output(&get_difffile,$command);
+  }
+
+  return 0;
+}
+
+sub read_file_into_string
+{
+  local($filename) = @_;
+  local($oldslash) = $/;
+
+  undef $/;
+
+  open (RFISFILE, $filename) || return "";
+  local ($slurp) = <RFISFILE>;
+  close (RFISFILE);
+
+  $/ = $oldslash;
+
+  return $slurp;
+}
+
+my @OUTSTACK = ();
+my @ERRSTACK = ();
+
+sub attach_default_output
+{
+  local ($filename) = @_;
+  local ($code);
+
+  if ($vos)
+  {
+    $code = system "++attach_default_output_hack $filename";
+    $code == -2 || &error ("adoh death\n", 1);
+    return 1;
+  }
+
+  my $dup = undef;
+  open($dup, '>&', STDOUT) or error("ado: $! duping STDOUT\n", 1);
+  push @OUTSTACK, $dup;
+
+  $dup = undef;
+  open($dup, '>&', STDERR) or error("ado: $! duping STDERR\n", 1);
+  push @ERRSTACK, $dup;
+
+  open(STDOUT, '>', $filename) or error("ado: $filename: $!\n", 1);
+  open(STDERR, ">&STDOUT") or error("ado: $filename: $!\n", 1);
+}
+
+# close the current stdout/stderr, and restore the previous ones from
+# the "stack."
+
+sub detach_default_output
+{
+  local ($code);
+
+  if ($vos)
+  {
+    $code = system "++detach_default_output_hack";
+    $code == -2 || &error ("ddoh death\n", 1);
+    return 1;
+  }
+
+  @OUTSTACK or error("default output stack has flown under!\n", 1);
+
+  close(STDOUT);
+  close(STDERR) unless $^O eq 'VMS';
+
+
+  open (STDOUT, '>&', pop @OUTSTACK) or error("ddo: $! duping STDOUT\n", 1);
+  open (STDERR, '>&', pop @ERRSTACK) or error("ddo: $! duping STDERR\n", 1);
+}
+
+# This runs a command without any debugging info.
+sub _run_command
+{
+  my $code;
+
+  # We reset this before every invocation.  On Windows I think there is only
+  # one environment, not one per process, so I think that variables set in
+  # test scripts might leak into subsequent tests if this isn't reset--???
+  resetENV();
+
+  eval {
+      if ($^O eq 'VMS') {
+          local $SIG{ALRM} = sub {
+              my $e = $ERRSTACK[0];
+              print $e "\nTest timed out after $test_timeout seconds\n";
+              die "timeout\n"; };
+#          alarm $test_timeout;
+          system(@_);
+          my $severity = ${^CHILD_ERROR_NATIVE} & 7;
+          $code = 0;
+          if (($severity & 1) == 0) {
+              $code = 512;
+          }
+
+          # Get the vms status.
+          my $vms_code = ${^CHILD_ERROR_NATIVE};
+
+          # Remove the print status bit
+          $vms_code &= ~0x10000000;
+
+          # Posix code translation.
+          if (($vms_code & 0xFFFFF000) == 0x35a000) {
+              $code = (($vms_code & 0xFFF) >> 3) * 256;
+          }
+      } else {
+          my $pid = fork();
+          if (! $pid) {
+              exec(@_) or die "Cannot execute $_[0]\n";
+          }
+          local $SIG{ALRM} = sub { my $e = $ERRSTACK[0]; print $e "\nTest timed out after $test_timeout seconds\n"; die "timeout\n"; };
+          alarm $test_timeout;
+          waitpid($pid, 0) > 0 or die "No such pid: $pid\n";
+          $code = $?;
+      }
+      alarm 0;
+  };
+  if ($@) {
+      # The eval failed.  If it wasn't SIGALRM then die.
+      $@ eq "timeout\n" or die "Command failed: $@";
+
+      # Timed out.  Resend the alarm to our process group to kill the children.
+      $SIG{ALRM} = 'IGNORE';
+      kill -14, $$;
+      $code = 14;
+  }
+
+  return $code;
+}
+
+# run one command (passed as a list of arg 0 - n), returning 0 on success
+# and nonzero on failure.
+
+sub run_command
+{
+  print "\nrun_command: @_\n" if $debug;
+  my $code = _run_command(@_);
+  print "run_command returned $code.\n" if $debug;
+  print "vms status = ${^CHILD_ERROR_NATIVE}\n" if $debug and $^O eq 'VMS';
+  return $code;
+}
+
+# run one command (passed as a list of arg 0 - n, with arg 0 being the
+# second arg to this routine), returning 0 on success and non-zero on failure.
+# The first arg to this routine is a filename to connect to the stdout
+# & stderr of the child process.
+
+sub run_command_with_output
+{
+  my $filename = shift;
+
+  print "\nrun_command_with_output($filename,$runname): @_\n" if $debug;
+  &attach_default_output ($filename);
+  my $code = eval { _run_command(@_) };
+  my $err = $@;
+  &detach_default_output;
+
+  $err and die $err;
+
+  print "run_command_with_output returned $code.\n" if $debug;
+  print "vms status = ${^CHILD_ERROR_NATIVE}\n" if $debug and $^O eq 'VMS';
+  return $code;
+}
+
+# performs the equivalent of an "rm -rf" on the first argument.  Like
+# rm, if the path ends in /, leaves the (now empty) directory; otherwise
+# deletes it, too.
+
+sub remove_directory_tree
+{
+  local ($targetdir) = @_;
+  local ($nuketop) = 1;
+  local ($ch);
+
+  $ch = substr ($targetdir, length ($targetdir) - 1);
+  if ($ch eq "/" || $ch eq $pathsep)
+  {
+    $targetdir = substr ($targetdir, 0, length ($targetdir) - 1);
+    $nuketop = 0;
+  }
+
+  if (! -e $targetdir)
+  {
+    return 1;
+  }
+
+  &remove_directory_tree_inner ("RDT00", $targetdir) || return 0;
+  if ($nuketop)
+  {
+    rmdir $targetdir || return 0;
+  }
+
+  return 1;
+}
+
+sub remove_directory_tree_inner
+{
+  local ($dirhandle, $targetdir) = @_;
+  local ($object);
+  local ($subdirhandle);
+
+  opendir ($dirhandle, $targetdir) || return 0;
+  $subdirhandle = $dirhandle;
+  $subdirhandle++;
+  while ($object = readdir ($dirhandle))
+  {
+    if ($object =~ /^(\.\.?|CVS|RCS)$/)
+    {
+      next;
+    }
+
+    $object = "$targetdir$pathsep$object";
+    lstat ($object);
+
+    if (-d _ && &remove_directory_tree_inner ($subdirhandle, $object))
+    {
+      rmdir $object || return 0;
+    }
+    else
+    {
+      if ($^O ne 'VMS')
+      {
+        unlink $object || return 0;
+      }
+      else
+      {
+        # VMS can have multiple versions of a file.
+        1 while unlink $object;
+      }
+    }
+  }
+  closedir ($dirhandle);
+  return 1;
+}
+
+# We used to use this behavior for this function:
+#
+#sub touch
+#{
+#  local (@filenames) = @_;
+#  local ($now) = time;
+#  local ($file);
+#
+#  foreach $file (@filenames)
+#  {
+#    utime ($now, $now, $file)
+#          || (open (TOUCHFD, ">> $file") && close (TOUCHFD))
+#               || &error ("Couldn't touch $file: $!\n", 1);
+#  }
+#  return 1;
+#}
+#
+# But this behaves badly on networked filesystems where the time is
+# skewed, because it sets the time of the file based on the _local_
+# host.  Normally when you modify a file, it's the _remote_ host that
+# determines the modtime, based on _its_ clock.  So, instead, now we open
+# the file and write something into it to force the remote host to set
+# the modtime correctly according to its clock.
+#
+
+sub touch
+{
+  local ($file);
+
+  foreach $file (@_) {
+    (open(T, ">> $file") && print(T "\n") && close(T))
+        || &error("Couldn't touch $file: $!\n", 1);
+  }
+}
+
+# Touch with a time offset.  To DTRT, call touch() then use stat() to get the
+# access/mod time for each file and apply the offset.
+
+sub utouch
+{
+  local ($off) = shift;
+  local ($file);
+
+  &touch(@_);
+
+  local (@s) = stat($_[0]);
+
+  utime($s[8]+$off, $s[9]+$off, @_);
+}
+
+# open a file, write some stuff to it, and close it.
+
+sub create_file
+{
+  local ($filename, @lines) = @_;
+
+  open (CF, "> $filename") || &error ("Couldn't open $filename: $!\n", 1);
+  foreach $line (@lines)
+  {
+    print CF $line;
+  }
+  close (CF);
+}
+
+# create a directory tree described by an associative array, wherein each
+# key is a relative pathname (using slashes) and its associated value is
+# one of:
+#    DIR            indicates a directory
+#    FILE:contents  indicates a file, which should contain contents +\n
+#    LINK:target    indicates a symlink, pointing to $basedir/target
+# The first argument is the dir under which the structure will be created
+# (the dir will be made and/or cleaned if necessary); the second argument
+# is the associative array.
+
+sub create_dir_tree
+{
+  local ($basedir, %dirtree) = @_;
+  local ($path);
+
+  &remove_directory_tree ("$basedir");
+  mkdir ($basedir, 0777) || &error ("Couldn't mkdir $basedir: $!\n", 1);
+
+  foreach $path (sort keys (%dirtree))
+  {
+    if ($dirtree {$path} =~ /^DIR$/)
+    {
+      mkdir ("$basedir/$path", 0777)
+               || &error ("Couldn't mkdir $basedir/$path: $!\n", 1);
+    }
+    elsif ($dirtree {$path} =~ /^FILE:(.*)$/)
+    {
+      &create_file ("$basedir/$path", $1 . "\n");
+    }
+    elsif ($dirtree {$path} =~ /^LINK:(.*)$/)
+    {
+      symlink ("$basedir/$1", "$basedir/$path")
+        || &error ("Couldn't symlink $basedir/$path -> $basedir/$1: $!\n", 1);
+    }
+    else
+    {
+      &error ("Bogus dirtree type: \"$dirtree{$path}\"\n", 1);
+    }
+  }
+  if ($just_setup_tree)
+  {
+    die "Tree is setup...\n";
+  }
+}
+
+# compare a directory tree with an associative array in the format used
+# by create_dir_tree, above.
+# The first argument is the dir under which the structure should be found;
+# the second argument is the associative array.
+
+sub compare_dir_tree
+{
+  local ($basedir, %dirtree) = @_;
+  local ($path);
+  local ($i);
+  local ($bogus) = 0;
+  local ($contents);
+  local ($target);
+  local ($fulltarget);
+  local ($found);
+  local (@files);
+  local (@allfiles);
+
+  opendir (DIR, $basedir) || &error ("Couldn't open $basedir: $!\n", 1);
+  @allfiles = grep (!/^(\.\.?|CVS|RCS)$/, readdir (DIR) );
+  closedir (DIR);
+  if ($debug)
+  {
+    print "dirtree: (%dirtree)\n$basedir: (@allfiles)\n";
+  }
+
+  foreach $path (sort keys (%dirtree))
+  {
+    if ($debug)
+    {
+      print "Checking $path ($dirtree{$path}).\n";
+    }
+
+    $found = 0;
+    foreach $i (0 .. $#allfiles)
+    {
+      if ($allfiles[$i] eq $path)
+      {
+        splice (@allfiles, $i, 1);  # delete it
+        if ($debug)
+        {
+          print "     Zapped $path; files now (@allfiles).\n";
+        }
+        lstat ("$basedir/$path");
+        $found = 1;
+        last;
+      }
+    }
+
+    if (!$found)
+    {
+      print "compare_dir_tree: $path does not exist.\n";
+      $bogus = 1;
+      next;
+    }
+
+    if ($dirtree {$path} =~ /^DIR$/)
+    {
+      if (-d _ && opendir (DIR, "$basedir/$path") )
+      {
+        @files = readdir (DIR);
+        closedir (DIR);
+        @files = grep (!/^(\.\.?|CVS|RCS)$/ && ($_ = "$path/$_"), @files);
+        push (@allfiles, @files);
+        if ($debug)
+        {
+          print "     Read in $path; new files (@files).\n";
+        }
+      }
+      else
+      {
+        print "compare_dir_tree: $path is not a dir.\n";
+        $bogus = 1;
+      }
+    }
+    elsif ($dirtree {$path} =~ /^FILE:(.*)$/)
+    {
+      if (-l _ || !-f _)
+      {
+        print "compare_dir_tree: $path is not a file.\n";
+        $bogus = 1;
+        next;
+      }
+
+      if ($1 ne "*")
+      {
+        $contents = &read_file_into_string ("$basedir/$path");
+        if ($contents ne "$1\n")
+        {
+          print "compare_dir_tree: $path contains wrong stuff."
+              . "  Is:\n$contentsShould be:\n$1\n";
+          $bogus = 1;
+        }
+      }
+    }
+    elsif ($dirtree {$path} =~ /^LINK:(.*)$/)
+    {
+      $target = $1;
+      if (!-l _)
+      {
+        print "compare_dir_tree: $path is not a link.\n";
+        $bogus = 1;
+        next;
+      }
+
+      $contents = readlink ("$basedir/$path");
+      $contents =~ tr/>/\//;
+      $fulltarget = "$basedir/$target";
+      $fulltarget =~ tr/>/\//;
+      if (!($contents =~ /$fulltarget$/))
+      {
+        if ($debug)
+        {
+          $target = $fulltarget;
+        }
+        print "compare_dir_tree: $path should be link to $target, "
+            . "not $contents.\n";
+        $bogus = 1;
+      }
+    }
+    else
+    {
+      &error ("Bogus dirtree type: \"$dirtree{$path}\"\n", 1);
+    }
+  }
+
+  if ($debug)
+  {
+    print "leftovers: (@allfiles).\n";
+  }
+
+  foreach $file (@allfiles)
+  {
+    print "compare_dir_tree: $file should not exist.\n";
+    $bogus = 1;
+  }
+
+  return !$bogus;
+}
+
+# this subroutine generates the numeric suffix used to keep tmp filenames,
+# log filenames, etc., unique.  If the number passed in is 1, then a null
+# string is returned; otherwise, we return ".n", where n + 1 is the number
+# we were given.
+
+sub num_suffix
+{
+  local($num) = @_;
+
+  if (--$num > 0) {
+    return "$extext$num";
+  }
+
+  return "";
+}
+
+# This subroutine returns a log filename with a number appended to
+# the end corresponding to how many logfiles have been created in the
+# current running test.  An optional parameter may be passed (0 or 1).
+# If a 1 is passed, then it does NOT increment the logfile counter
+# and returns the name of the latest logfile.  If either no parameter
+# is passed at all or a 0 is passed, then the logfile counter is
+# incremented and the new name is returned.
+
+sub get_logfile
+{
+  local($no_increment) = @_;
+
+  $num_of_logfiles += !$no_increment;
+
+  return ($log_filename . &num_suffix ($num_of_logfiles));
+}
+
+# This subroutine returns a base (answer) filename with a number
+# appended to the end corresponding to how many logfiles (and thus
+# base files) have been created in the current running test.
+# NO PARAMETERS ARE PASSED TO THIS SUBROUTINE.
+
+sub get_basefile
+{
+  return ($base_filename . &num_suffix ($num_of_logfiles));
+}
+
+# This subroutine returns a difference filename with a number appended
+# to the end corresponding to how many logfiles (and thus diff files)
+# have been created in the current running test.
+
+sub get_difffile
+{
+  return ($diff_filename . &num_suffix ($num_of_logfiles));
+}
+
+# This subroutine returns a command filename with a number appended
+# to the end corresponding to how many logfiles (and thus command files)
+# have been created in the current running test.
+
+sub get_runfile
+{
+  return ($run_filename . &num_suffix ($num_of_logfiles));
+}
+
+# just like logfile, only a generic tmp filename for use by the test.
+# they are automatically cleaned up unless -keep was used, or the test fails.
+# Pass an argument of 1 to return the same filename as the previous call.
+
+sub get_tmpfile
+{
+  local($no_increment) = @_;
+
+  $num_of_tmpfiles += !$no_increment;
+
+  return ($tmp_filename . &num_suffix ($num_of_tmpfiles));
+}
+
+1;
diff --git a/variable.c b/variable.c
new file mode 100644
index 0000000..01b6d89
--- /dev/null
+++ b/variable.c
@@ -0,0 +1,1772 @@
+/* Internals of variables for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include <assert.h>
+
+#include "filedef.h"
+#include "dep.h"
+#include "job.h"
+#include "commands.h"
+#include "variable.h"
+#include "rule.h"
+#ifdef WINDOWS32
+#include "pathstuff.h"
+#endif
+#include "hash.h"
+
+/* Chain of all pattern-specific variables.  */
+
+static struct pattern_var *pattern_vars;
+
+/* Pointer to the last struct in the pack of a specific size, from 1 to 255.*/
+
+static struct pattern_var *last_pattern_vars[256];
+
+/* Create a new pattern-specific variable struct. The new variable is
+   inserted into the PATTERN_VARS list in the shortest patterns first
+   order to support the shortest stem matching (the variables are
+   matched in the reverse order so the ones with the longest pattern
+   will be considered first). Variables with the same pattern length
+   are inserted in the definition order. */
+
+struct pattern_var *
+create_pattern_var (const char *target, const char *suffix)
+{
+  register unsigned int len = strlen (target);
+  register struct pattern_var *p = xmalloc (sizeof (struct pattern_var));
+
+  if (pattern_vars != 0)
+    {
+      if (len < 256 && last_pattern_vars[len] != 0)
+        {
+          p->next = last_pattern_vars[len]->next;
+          last_pattern_vars[len]->next = p;
+        }
+      else
+        {
+          /* Find the position where we can insert this variable. */
+          register struct pattern_var **v;
+
+          for (v = &pattern_vars; ; v = &(*v)->next)
+            {
+              /* Insert at the end of the pack so that patterns with the
+                 same length appear in the order they were defined .*/
+
+              if (*v == 0 || (*v)->len > len)
+                {
+                  p->next = *v;
+                  *v = p;
+                  break;
+                }
+            }
+        }
+    }
+  else
+    {
+      pattern_vars = p;
+      p->next = 0;
+    }
+
+  p->target = target;
+  p->len = len;
+  p->suffix = suffix + 1;
+
+  if (len < 256)
+    last_pattern_vars[len] = p;
+
+  return p;
+}
+
+/* Look up a target in the pattern-specific variable list.  */
+
+static struct pattern_var *
+lookup_pattern_var (struct pattern_var *start, const char *target)
+{
+  struct pattern_var *p;
+  unsigned int targlen = strlen (target);
+
+  for (p = start ? start->next : pattern_vars; p != 0; p = p->next)
+    {
+      const char *stem;
+      unsigned int stemlen;
+
+      if (p->len > targlen)
+        /* It can't possibly match.  */
+        continue;
+
+      /* From the lengths of the filename and the pattern parts,
+         find the stem: the part of the filename that matches the %.  */
+      stem = target + (p->suffix - p->target - 1);
+      stemlen = targlen - p->len + 1;
+
+      /* Compare the text in the pattern before the stem, if any.  */
+      if (stem > target && !strneq (p->target, target, stem - target))
+        continue;
+
+      /* Compare the text in the pattern after the stem, if any.
+         We could test simply using streq, but this way we compare the
+         first two characters immediately.  This saves time in the very
+         common case where the first character matches because it is a
+         period.  */
+      if (*p->suffix == stem[stemlen]
+          && (*p->suffix == '\0' || streq (&p->suffix[1], &stem[stemlen+1])))
+        break;
+    }
+
+  return p;
+}
+
+/* Hash table of all global variable definitions.  */
+
+static unsigned long
+variable_hash_1 (const void *keyv)
+{
+  struct variable const *key = (struct variable const *) keyv;
+  return_STRING_N_HASH_1 (key->name, key->length);
+}
+
+static unsigned long
+variable_hash_2 (const void *keyv)
+{
+  struct variable const *key = (struct variable const *) keyv;
+  return_STRING_N_HASH_2 (key->name, key->length);
+}
+
+static int
+variable_hash_cmp (const void *xv, const void *yv)
+{
+  struct variable const *x = (struct variable const *) xv;
+  struct variable const *y = (struct variable const *) yv;
+  int result = x->length - y->length;
+  if (result)
+    return result;
+  return_STRING_N_COMPARE (x->name, y->name, x->length);
+}
+
+#ifndef VARIABLE_BUCKETS
+#define VARIABLE_BUCKETS                523
+#endif
+#ifndef PERFILE_VARIABLE_BUCKETS
+#define PERFILE_VARIABLE_BUCKETS        23
+#endif
+#ifndef SMALL_SCOPE_VARIABLE_BUCKETS
+#define SMALL_SCOPE_VARIABLE_BUCKETS    13
+#endif
+
+static struct variable_set global_variable_set;
+static struct variable_set_list global_setlist
+  = { 0, &global_variable_set, 0 };
+struct variable_set_list *current_variable_set_list = &global_setlist;
+
+/* Implement variables.  */
+
+void
+init_hash_global_variable_set (void)
+{
+  hash_init (&global_variable_set.table, VARIABLE_BUCKETS,
+             variable_hash_1, variable_hash_2, variable_hash_cmp);
+}
+
+/* Define variable named NAME with value VALUE in SET.  VALUE is copied.
+   LENGTH is the length of NAME, which does not need to be null-terminated.
+   ORIGIN specifies the origin of the variable (makefile, command line
+   or environment).
+   If RECURSIVE is nonzero a flag is set in the variable saying
+   that it should be recursively re-expanded.  */
+
+struct variable *
+define_variable_in_set (const char *name, unsigned int length,
+                        const char *value, enum variable_origin origin,
+                        int recursive, struct variable_set *set,
+                        const gmk_floc *flocp)
+{
+  struct variable *v;
+  struct variable **var_slot;
+  struct variable var_key;
+
+  if (set == NULL)
+    set = &global_variable_set;
+
+  var_key.name = (char *) name;
+  var_key.length = length;
+  var_slot = (struct variable **) hash_find_slot (&set->table, &var_key);
+
+  if (env_overrides && origin == o_env)
+    origin = o_env_override;
+
+  v = *var_slot;
+  if (! HASH_VACANT (v))
+    {
+      if (env_overrides && v->origin == o_env)
+        /* V came from in the environment.  Since it was defined
+           before the switches were parsed, it wasn't affected by -e.  */
+        v->origin = o_env_override;
+
+      /* A variable of this name is already defined.
+         If the old definition is from a stronger source
+         than this one, don't redefine it.  */
+      if ((int) origin >= (int) v->origin)
+        {
+          free (v->value);
+          v->value = xstrdup (value);
+          if (flocp != 0)
+            v->fileinfo = *flocp;
+          else
+            v->fileinfo.filenm = 0;
+          v->origin = origin;
+          v->recursive = recursive;
+        }
+      return v;
+    }
+
+  /* Create a new variable definition and add it to the hash table.  */
+
+  v = xmalloc (sizeof (struct variable));
+  v->name = xstrndup (name, length);
+  v->length = length;
+  hash_insert_at (&set->table, v, var_slot);
+  v->value = xstrdup (value);
+  if (flocp != 0)
+    v->fileinfo = *flocp;
+  else
+    v->fileinfo.filenm = 0;
+  v->origin = origin;
+  v->recursive = recursive;
+  v->special = 0;
+  v->expanding = 0;
+  v->exp_count = 0;
+  v->per_target = 0;
+  v->append = 0;
+  v->private_var = 0;
+  v->export = v_default;
+
+  v->exportable = 1;
+  if (*name != '_' && (*name < 'A' || *name > 'Z')
+      && (*name < 'a' || *name > 'z'))
+    v->exportable = 0;
+  else
+    {
+      for (++name; *name != '\0'; ++name)
+        if (*name != '_' && (*name < 'a' || *name > 'z')
+            && (*name < 'A' || *name > 'Z') && !ISDIGIT(*name))
+          break;
+
+      if (*name != '\0')
+        v->exportable = 0;
+    }
+
+  return v;
+}
+
+
+/* Undefine variable named NAME in SET. LENGTH is the length of NAME, which
+   does not need to be null-terminated. ORIGIN specifies the origin of the
+   variable (makefile, command line or environment). */
+
+static void
+free_variable_name_and_value (const void *item)
+{
+  struct variable *v = (struct variable *) item;
+  free (v->name);
+  free (v->value);
+}
+
+void
+free_variable_set (struct variable_set_list *list)
+{
+  hash_map (&list->set->table, free_variable_name_and_value);
+  hash_free (&list->set->table, 1);
+  free (list->set);
+  free (list);
+}
+
+void
+undefine_variable_in_set (const char *name, unsigned int length,
+                          enum variable_origin origin,
+                          struct variable_set *set)
+{
+  struct variable *v;
+  struct variable **var_slot;
+  struct variable var_key;
+
+  if (set == NULL)
+    set = &global_variable_set;
+
+  var_key.name = (char *) name;
+  var_key.length = length;
+  var_slot = (struct variable **) hash_find_slot (&set->table, &var_key);
+
+  if (env_overrides && origin == o_env)
+    origin = o_env_override;
+
+  v = *var_slot;
+  if (! HASH_VACANT (v))
+    {
+      if (env_overrides && v->origin == o_env)
+        /* V came from in the environment.  Since it was defined
+           before the switches were parsed, it wasn't affected by -e.  */
+        v->origin = o_env_override;
+
+      /* If the definition is from a stronger source than this one, don't
+         undefine it.  */
+      if ((int) origin >= (int) v->origin)
+        {
+          hash_delete_at (&set->table, var_slot);
+          free_variable_name_and_value (v);
+        }
+    }
+}
+
+/* If the variable passed in is "special", handle its special nature.
+   Currently there are two such variables, both used for introspection:
+   .VARIABLES expands to a list of all the variables defined in this instance
+   of make.
+   .TARGETS expands to a list of all the targets defined in this
+   instance of make.
+   Returns the variable reference passed in.  */
+
+#define EXPANSION_INCREMENT(_l)  ((((_l) / 500) + 1) * 500)
+
+static struct variable *
+lookup_special_var (struct variable *var)
+{
+  static unsigned long last_var_count = 0;
+
+
+  /* This one actually turns out to be very hard, due to the way the parser
+     records targets.  The way it works is that target information is collected
+     internally until make knows the target is completely specified.  It unitl
+     it sees that some new construct (a new target or variable) is defined that
+     it knows the previous one is done.  In short, this means that if you do
+     this:
+
+       all:
+
+       TARGS := $(.TARGETS)
+
+     then $(TARGS) won't contain "all", because it's not until after the
+     variable is created that the previous target is completed.
+
+     Changing this would be a major pain.  I think a less complex way to do it
+     would be to pre-define the target files as soon as the first line is
+     parsed, then come back and do the rest of the definition as now.  That
+     would allow $(.TARGETS) to be correct without a major change to the way
+     the parser works.
+
+  if (streq (var->name, ".TARGETS"))
+    var->value = build_target_list (var->value);
+  else
+  */
+
+  if (streq (var->name, ".VARIABLES")
+      && global_variable_set.table.ht_fill != last_var_count)
+    {
+      unsigned long max = EXPANSION_INCREMENT (strlen (var->value));
+      unsigned long len;
+      char *p;
+      struct variable **vp = (struct variable **) global_variable_set.table.ht_vec;
+      struct variable **end = &vp[global_variable_set.table.ht_size];
+
+      /* Make sure we have at least MAX bytes in the allocated buffer.  */
+      var->value = xrealloc (var->value, max);
+
+      /* Walk through the hash of variables, constructing a list of names.  */
+      p = var->value;
+      len = 0;
+      for (; vp < end; ++vp)
+        if (!HASH_VACANT (*vp))
+          {
+            struct variable *v = *vp;
+            int l = v->length;
+
+            len += l + 1;
+            if (len > max)
+              {
+                unsigned long off = p - var->value;
+
+                max += EXPANSION_INCREMENT (l + 1);
+                var->value = xrealloc (var->value, max);
+                p = &var->value[off];
+              }
+
+            memcpy (p, v->name, l);
+            p += l;
+            *(p++) = ' ';
+          }
+      *(p-1) = '\0';
+
+      /* Remember how many variables are in our current count.  Since we never
+         remove variables from the list, this is a reliable way to know whether
+         the list is up to date or needs to be recomputed.  */
+
+      last_var_count = global_variable_set.table.ht_fill;
+    }
+
+  return var;
+}
+
+
+/* Lookup a variable whose name is a string starting at NAME
+   and with LENGTH chars.  NAME need not be null-terminated.
+   Returns address of the 'struct variable' containing all info
+   on the variable, or nil if no such variable is defined.  */
+
+struct variable *
+lookup_variable (const char *name, unsigned int length)
+{
+  const struct variable_set_list *setlist;
+  struct variable var_key;
+  int is_parent = 0;
+
+  var_key.name = (char *) name;
+  var_key.length = length;
+
+  for (setlist = current_variable_set_list;
+       setlist != 0; setlist = setlist->next)
+    {
+      const struct variable_set *set = setlist->set;
+      struct variable *v;
+
+      v = (struct variable *) hash_find_item ((struct hash_table *) &set->table, &var_key);
+      if (v && (!is_parent || !v->private_var))
+        return v->special ? lookup_special_var (v) : v;
+
+      is_parent |= setlist->next_is_parent;
+    }
+
+#ifdef VMS
+  /* since we don't read envp[] on startup, try to get the
+     variable via getenv() here.  */
+  {
+    char *vname = alloca (length + 1);
+    char *value;
+    strncpy (vname, name, length);
+    vname[length] = 0;
+    value = getenv (vname);
+    if (value != 0)
+      {
+        char *sptr;
+        int scnt;
+
+        sptr = value;
+        scnt = 0;
+
+        while ((sptr = strchr (sptr, '$')))
+          {
+            scnt++;
+            sptr++;
+          }
+
+        if (scnt > 0)
+          {
+            char *nvalue;
+            char *nptr;
+
+            nvalue = alloca (strlen (value) + scnt + 1);
+            sptr = value;
+            nptr = nvalue;
+
+            while (*sptr)
+              {
+                if (*sptr == '$')
+                  {
+                    *nptr++ = '$';
+                    *nptr++ = '$';
+                  }
+                else
+                  {
+                    *nptr++ = *sptr;
+                  }
+                sptr++;
+              }
+
+            *nptr = '\0';
+            return define_variable (vname, length, nvalue, o_env, 1);
+
+          }
+
+        return define_variable (vname, length, value, o_env, 1);
+      }
+  }
+#endif /* VMS */
+
+  return 0;
+}
+
+/* Lookup a variable whose name is a string starting at NAME
+   and with LENGTH chars in set SET.  NAME need not be null-terminated.
+   Returns address of the 'struct variable' containing all info
+   on the variable, or nil if no such variable is defined.  */
+
+struct variable *
+lookup_variable_in_set (const char *name, unsigned int length,
+                        const struct variable_set *set)
+{
+  struct variable var_key;
+
+  var_key.name = (char *) name;
+  var_key.length = length;
+
+  return (struct variable *) hash_find_item ((struct hash_table *) &set->table, &var_key);
+}
+
+/* Initialize FILE's variable set list.  If FILE already has a variable set
+   list, the topmost variable set is left intact, but the the rest of the
+   chain is replaced with FILE->parent's setlist.  If FILE is a double-colon
+   rule, then we will use the "root" double-colon target's variable set as the
+   parent of FILE's variable set.
+
+   If we're READING a makefile, don't do the pattern variable search now,
+   since the pattern variable might not have been defined yet.  */
+
+void
+initialize_file_variables (struct file *file, int reading)
+{
+  struct variable_set_list *l = file->variables;
+
+  if (l == 0)
+    {
+      l = (struct variable_set_list *)
+        xmalloc (sizeof (struct variable_set_list));
+      l->set = xmalloc (sizeof (struct variable_set));
+      hash_init (&l->set->table, PERFILE_VARIABLE_BUCKETS,
+                 variable_hash_1, variable_hash_2, variable_hash_cmp);
+      file->variables = l;
+    }
+
+  /* If this is a double-colon, then our "parent" is the "root" target for
+     this double-colon rule.  Since that rule has the same name, parent,
+     etc. we can just use its variables as the "next" for ours.  */
+
+  if (file->double_colon && file->double_colon != file)
+    {
+      initialize_file_variables (file->double_colon, reading);
+      l->next = file->double_colon->variables;
+      l->next_is_parent = 0;
+      return;
+    }
+
+  if (file->parent == 0)
+    l->next = &global_setlist;
+  else
+    {
+      initialize_file_variables (file->parent, reading);
+      l->next = file->parent->variables;
+    }
+  l->next_is_parent = 1;
+
+  /* If we're not reading makefiles and we haven't looked yet, see if
+     we can find pattern variables for this target.  */
+
+  if (!reading && !file->pat_searched)
+    {
+      struct pattern_var *p;
+
+      p = lookup_pattern_var (0, file->name);
+      if (p != 0)
+        {
+          struct variable_set_list *global = current_variable_set_list;
+
+          /* We found at least one.  Set up a new variable set to accumulate
+             all the pattern variables that match this target.  */
+
+          file->pat_variables = create_new_variable_set ();
+          current_variable_set_list = file->pat_variables;
+
+          do
+            {
+              /* We found one, so insert it into the set.  */
+
+              struct variable *v;
+
+              if (p->variable.flavor == f_simple)
+                {
+                  v = define_variable_loc (
+                    p->variable.name, strlen (p->variable.name),
+                    p->variable.value, p->variable.origin,
+                    0, &p->variable.fileinfo);
+
+                  v->flavor = f_simple;
+                }
+              else
+                {
+                  v = do_variable_definition (
+                    &p->variable.fileinfo, p->variable.name,
+                    p->variable.value, p->variable.origin,
+                    p->variable.flavor, 1);
+                }
+
+              /* Also mark it as a per-target and copy export status. */
+              v->per_target = p->variable.per_target;
+              v->export = p->variable.export;
+              v->private_var = p->variable.private_var;
+            }
+          while ((p = lookup_pattern_var (p, file->name)) != 0);
+
+          current_variable_set_list = global;
+        }
+      file->pat_searched = 1;
+    }
+
+  /* If we have a pattern variable match, set it up.  */
+
+  if (file->pat_variables != 0)
+    {
+      file->pat_variables->next = l->next;
+      file->pat_variables->next_is_parent = l->next_is_parent;
+      l->next = file->pat_variables;
+      l->next_is_parent = 0;
+    }
+}
+
+/* Pop the top set off the current variable set list,
+   and free all its storage.  */
+
+struct variable_set_list *
+create_new_variable_set (void)
+{
+  register struct variable_set_list *setlist;
+  register struct variable_set *set;
+
+  set = xmalloc (sizeof (struct variable_set));
+  hash_init (&set->table, SMALL_SCOPE_VARIABLE_BUCKETS,
+             variable_hash_1, variable_hash_2, variable_hash_cmp);
+
+  setlist = (struct variable_set_list *)
+    xmalloc (sizeof (struct variable_set_list));
+  setlist->set = set;
+  setlist->next = current_variable_set_list;
+  setlist->next_is_parent = 0;
+
+  return setlist;
+}
+
+/* Create a new variable set and push it on the current setlist.
+   If we're pushing a global scope (that is, the current scope is the global
+   scope) then we need to "push" it the other way: file variable sets point
+   directly to the global_setlist so we need to replace that with the new one.
+ */
+
+struct variable_set_list *
+push_new_variable_scope (void)
+{
+  current_variable_set_list = create_new_variable_set ();
+  if (current_variable_set_list->next == &global_setlist)
+    {
+      /* It was the global, so instead of new -> &global we want to replace
+         &global with the new one and have &global -> new, with current still
+         pointing to &global  */
+      struct variable_set *set = current_variable_set_list->set;
+      current_variable_set_list->set = global_setlist.set;
+      global_setlist.set = set;
+      current_variable_set_list->next = global_setlist.next;
+      global_setlist.next = current_variable_set_list;
+      current_variable_set_list = &global_setlist;
+    }
+  return (current_variable_set_list);
+}
+
+void
+pop_variable_scope (void)
+{
+  struct variable_set_list *setlist;
+  struct variable_set *set;
+
+  /* Can't call this if there's no scope to pop!  */
+  assert (current_variable_set_list->next != NULL);
+
+  if (current_variable_set_list != &global_setlist)
+    {
+      /* We're not pointing to the global setlist, so pop this one.  */
+      setlist = current_variable_set_list;
+      set = setlist->set;
+      current_variable_set_list = setlist->next;
+    }
+  else
+    {
+      /* This set is the one in the global_setlist, but there is another global
+         set beyond that.  We want to copy that set to global_setlist, then
+         delete what used to be in global_setlist.  */
+      setlist = global_setlist.next;
+      set = global_setlist.set;
+      global_setlist.set = setlist->set;
+      global_setlist.next = setlist->next;
+      global_setlist.next_is_parent = setlist->next_is_parent;
+    }
+
+  /* Free the one we no longer need.  */
+  free (setlist);
+  hash_map (&set->table, free_variable_name_and_value);
+  hash_free (&set->table, 1);
+  free (set);
+}
+
+/* Merge FROM_SET into TO_SET, freeing unused storage in FROM_SET.  */
+
+static void
+merge_variable_sets (struct variable_set *to_set,
+                     struct variable_set *from_set)
+{
+  struct variable **from_var_slot = (struct variable **) from_set->table.ht_vec;
+  struct variable **from_var_end = from_var_slot + from_set->table.ht_size;
+
+  for ( ; from_var_slot < from_var_end; from_var_slot++)
+    if (! HASH_VACANT (*from_var_slot))
+      {
+        struct variable *from_var = *from_var_slot;
+        struct variable **to_var_slot
+          = (struct variable **) hash_find_slot (&to_set->table, *from_var_slot);
+        if (HASH_VACANT (*to_var_slot))
+          hash_insert_at (&to_set->table, from_var, to_var_slot);
+        else
+          {
+            /* GKM FIXME: delete in from_set->table */
+            free (from_var->value);
+            free (from_var);
+          }
+      }
+}
+
+/* Merge SETLIST1 into SETLIST0, freeing unused storage in SETLIST1.  */
+
+void
+merge_variable_set_lists (struct variable_set_list **setlist0,
+                          struct variable_set_list *setlist1)
+{
+  struct variable_set_list *to = *setlist0;
+  struct variable_set_list *last0 = 0;
+
+  /* If there's nothing to merge, stop now.  */
+  if (!setlist1)
+    return;
+
+  /* This loop relies on the fact that all setlists terminate with the global
+     setlist (before NULL).  If that's not true, arguably we SHOULD die.  */
+  if (to)
+    while (setlist1 != &global_setlist && to != &global_setlist)
+      {
+        struct variable_set_list *from = setlist1;
+        setlist1 = setlist1->next;
+
+        merge_variable_sets (to->set, from->set);
+
+        last0 = to;
+        to = to->next;
+      }
+
+  if (setlist1 != &global_setlist)
+    {
+      if (last0 == 0)
+        *setlist0 = setlist1;
+      else
+        last0->next = setlist1;
+    }
+}
+
+/* Define the automatic variables, and record the addresses
+   of their structures so we can change their values quickly.  */
+
+void
+define_automatic_variables (void)
+{
+  extern const char* default_shell;
+  struct variable *v;
+  char buf[200];
+
+  sprintf (buf, "%u", makelevel);
+  define_variable_cname (MAKELEVEL_NAME, buf, o_env, 0);
+
+  sprintf (buf, "%s%s%s",
+           version_string,
+           (remote_description == 0 || remote_description[0] == '\0')
+           ? "" : "-",
+           (remote_description == 0 || remote_description[0] == '\0')
+           ? "" : remote_description);
+  define_variable_cname ("MAKE_VERSION", buf, o_default, 0);
+  define_variable_cname ("MAKE_HOST", make_host, o_default, 0);
+
+#ifdef  __MSDOS__
+  /* Allow to specify a special shell just for Make,
+     and use $COMSPEC as the default $SHELL when appropriate.  */
+  {
+    static char shell_str[] = "SHELL";
+    const int shlen = sizeof (shell_str) - 1;
+    struct variable *mshp = lookup_variable ("MAKESHELL", 9);
+    struct variable *comp = lookup_variable ("COMSPEC", 7);
+
+    /* $(MAKESHELL) overrides $(SHELL) even if -e is in effect.  */
+    if (mshp)
+      (void) define_variable (shell_str, shlen,
+                              mshp->value, o_env_override, 0);
+    else if (comp)
+      {
+        /* $(COMSPEC) shouldn't override $(SHELL).  */
+        struct variable *shp = lookup_variable (shell_str, shlen);
+
+        if (!shp)
+          (void) define_variable (shell_str, shlen, comp->value, o_env, 0);
+      }
+  }
+#elif defined(__EMX__)
+  {
+    static char shell_str[] = "SHELL";
+    const int shlen = sizeof (shell_str) - 1;
+    struct variable *shell = lookup_variable (shell_str, shlen);
+    struct variable *replace = lookup_variable ("MAKESHELL", 9);
+
+    /* if $MAKESHELL is defined in the environment assume o_env_override */
+    if (replace && *replace->value && replace->origin == o_env)
+      replace->origin = o_env_override;
+
+    /* if $MAKESHELL is not defined use $SHELL but only if the variable
+       did not come from the environment */
+    if (!replace || !*replace->value)
+      if (shell && *shell->value && (shell->origin == o_env
+          || shell->origin == o_env_override))
+        {
+          /* overwrite whatever we got from the environment */
+          free (shell->value);
+          shell->value = xstrdup (default_shell);
+          shell->origin = o_default;
+        }
+
+    /* Some people do not like cmd to be used as the default
+       if $SHELL is not defined in the Makefile.
+       With -DNO_CMD_DEFAULT you can turn off this behaviour */
+# ifndef NO_CMD_DEFAULT
+    /* otherwise use $COMSPEC */
+    if (!replace || !*replace->value)
+      replace = lookup_variable ("COMSPEC", 7);
+
+    /* otherwise use $OS2_SHELL */
+    if (!replace || !*replace->value)
+      replace = lookup_variable ("OS2_SHELL", 9);
+# else
+#   warning NO_CMD_DEFAULT: GNU make will not use CMD.EXE as default shell
+# endif
+
+    if (replace && *replace->value)
+      /* overwrite $SHELL */
+      (void) define_variable (shell_str, shlen, replace->value,
+                              replace->origin, 0);
+    else
+      /* provide a definition if there is none */
+      (void) define_variable (shell_str, shlen, default_shell,
+                              o_default, 0);
+  }
+
+#endif
+
+  /* This won't override any definition, but it will provide one if there
+     isn't one there.  */
+  v = define_variable_cname ("SHELL", default_shell, o_default, 0);
+#ifdef __MSDOS__
+  v->export = v_export;  /*  Export always SHELL.  */
+#endif
+
+  /* On MSDOS we do use SHELL from environment, since it isn't a standard
+     environment variable on MSDOS, so whoever sets it, does that on purpose.
+     On OS/2 we do not use SHELL from environment but we have already handled
+     that problem above. */
+#if !defined(__MSDOS__) && !defined(__EMX__)
+  /* Don't let SHELL come from the environment.  */
+  if (*v->value == '\0' || v->origin == o_env || v->origin == o_env_override)
+    {
+      free (v->value);
+      v->origin = o_file;
+      v->value = xstrdup (default_shell);
+    }
+#endif
+
+  /* Make sure MAKEFILES gets exported if it is set.  */
+  v = define_variable_cname ("MAKEFILES", "", o_default, 0);
+  v->export = v_ifset;
+
+  /* Define the magic D and F variables in terms of
+     the automatic variables they are variations of.  */
+
+#ifdef VMS
+  define_variable_cname ("@D", "$(dir $@)", o_automatic, 1);
+  define_variable_cname ("%D", "$(dir $%)", o_automatic, 1);
+  define_variable_cname ("*D", "$(dir $*)", o_automatic, 1);
+  define_variable_cname ("<D", "$(dir $<)", o_automatic, 1);
+  define_variable_cname ("?D", "$(dir $?)", o_automatic, 1);
+  define_variable_cname ("^D", "$(dir $^)", o_automatic, 1);
+  define_variable_cname ("+D", "$(dir $+)", o_automatic, 1);
+#elif defined(__MSDOS__) || defined(WINDOWS32)
+  /* For consistency, remove the trailing backslash as well as slash.  */
+  define_variable_cname ("@D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $@)))",
+                         o_automatic, 1);
+  define_variable_cname ("%D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $%)))",
+                         o_automatic, 1);
+  define_variable_cname ("*D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $*)))",
+                         o_automatic, 1);
+  define_variable_cname ("<D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $<)))",
+                         o_automatic, 1);
+  define_variable_cname ("?D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $?)))",
+                         o_automatic, 1);
+  define_variable_cname ("^D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $^)))",
+                         o_automatic, 1);
+  define_variable_cname ("+D", "$(patsubst %/,%,$(patsubst %\\,%,$(dir $+)))",
+                         o_automatic, 1);
+#else  /* not __MSDOS__, not WINDOWS32 */
+  define_variable_cname ("@D", "$(patsubst %/,%,$(dir $@))", o_automatic, 1);
+  define_variable_cname ("%D", "$(patsubst %/,%,$(dir $%))", o_automatic, 1);
+  define_variable_cname ("*D", "$(patsubst %/,%,$(dir $*))", o_automatic, 1);
+  define_variable_cname ("<D", "$(patsubst %/,%,$(dir $<))", o_automatic, 1);
+  define_variable_cname ("?D", "$(patsubst %/,%,$(dir $?))", o_automatic, 1);
+  define_variable_cname ("^D", "$(patsubst %/,%,$(dir $^))", o_automatic, 1);
+  define_variable_cname ("+D", "$(patsubst %/,%,$(dir $+))", o_automatic, 1);
+#endif
+  define_variable_cname ("@F", "$(notdir $@)", o_automatic, 1);
+  define_variable_cname ("%F", "$(notdir $%)", o_automatic, 1);
+  define_variable_cname ("*F", "$(notdir $*)", o_automatic, 1);
+  define_variable_cname ("<F", "$(notdir $<)", o_automatic, 1);
+  define_variable_cname ("?F", "$(notdir $?)", o_automatic, 1);
+  define_variable_cname ("^F", "$(notdir $^)", o_automatic, 1);
+  define_variable_cname ("+F", "$(notdir $+)", o_automatic, 1);
+}
+
+int export_all_variables;
+
+/* Create a new environment for FILE's commands.
+   If FILE is nil, this is for the 'shell' function.
+   The child's MAKELEVEL variable is incremented.  */
+
+char **
+target_environment (struct file *file)
+{
+  struct variable_set_list *set_list;
+  register struct variable_set_list *s;
+  struct hash_table table;
+  struct variable **v_slot;
+  struct variable **v_end;
+  struct variable makelevel_key;
+  char **result_0;
+  char **result;
+
+  if (file == 0)
+    set_list = current_variable_set_list;
+  else
+    set_list = file->variables;
+
+  hash_init (&table, VARIABLE_BUCKETS,
+             variable_hash_1, variable_hash_2, variable_hash_cmp);
+
+  /* Run through all the variable sets in the list,
+     accumulating variables in TABLE.  */
+  for (s = set_list; s != 0; s = s->next)
+    {
+      struct variable_set *set = s->set;
+      v_slot = (struct variable **) set->table.ht_vec;
+      v_end = v_slot + set->table.ht_size;
+      for ( ; v_slot < v_end; v_slot++)
+        if (! HASH_VACANT (*v_slot))
+          {
+            struct variable **new_slot;
+            struct variable *v = *v_slot;
+
+            /* If this is a per-target variable and it hasn't been touched
+               already then look up the global version and take its export
+               value.  */
+            if (v->per_target && v->export == v_default)
+              {
+                struct variable *gv;
+
+                gv = lookup_variable_in_set (v->name, strlen (v->name),
+                                             &global_variable_set);
+                if (gv)
+                  v->export = gv->export;
+              }
+
+            switch (v->export)
+              {
+              case v_default:
+                if (v->origin == o_default || v->origin == o_automatic)
+                  /* Only export default variables by explicit request.  */
+                  continue;
+
+                /* The variable doesn't have a name that can be exported.  */
+                if (! v->exportable)
+                  continue;
+
+                if (! export_all_variables
+                    && v->origin != o_command
+                    && v->origin != o_env && v->origin != o_env_override)
+                  continue;
+                break;
+
+              case v_export:
+                break;
+
+              case v_noexport:
+                {
+                  /* If this is the SHELL variable and it's not exported,
+                     then add the value from our original environment, if
+                     the original environment defined a value for SHELL.  */
+                  extern struct variable shell_var;
+                  if (streq (v->name, "SHELL") && shell_var.value)
+                    {
+                      v = &shell_var;
+                      break;
+                    }
+                  continue;
+                }
+
+              case v_ifset:
+                if (v->origin == o_default)
+                  continue;
+                break;
+              }
+
+            new_slot = (struct variable **) hash_find_slot (&table, v);
+            if (HASH_VACANT (*new_slot))
+              hash_insert_at (&table, v, new_slot);
+          }
+    }
+
+  makelevel_key.name = xstrdup (MAKELEVEL_NAME);
+  makelevel_key.length = MAKELEVEL_LENGTH;
+  hash_delete (&table, &makelevel_key);
+
+  result = result_0 = xmalloc ((table.ht_fill + 2) * sizeof (char *));
+
+  v_slot = (struct variable **) table.ht_vec;
+  v_end = v_slot + table.ht_size;
+  for ( ; v_slot < v_end; v_slot++)
+    if (! HASH_VACANT (*v_slot))
+      {
+        struct variable *v = *v_slot;
+
+        /* If V is recursively expanded and didn't come from the environment,
+           expand its value.  If it came from the environment, it should
+           go back into the environment unchanged.  */
+        if (v->recursive
+            && v->origin != o_env && v->origin != o_env_override)
+          {
+            char *value = recursively_expand_for_file (v, file);
+#ifdef WINDOWS32
+            if (strcmp (v->name, "Path") == 0 ||
+                strcmp (v->name, "PATH") == 0)
+              convert_Path_to_windows32 (value, ';');
+#endif
+            *result++ = xstrdup (concat (3, v->name, "=", value));
+            free (value);
+          }
+        else
+          {
+#ifdef WINDOWS32
+            if (strcmp (v->name, "Path") == 0 ||
+                strcmp (v->name, "PATH") == 0)
+              convert_Path_to_windows32 (v->value, ';');
+#endif
+            *result++ = xstrdup (concat (3, v->name, "=", v->value));
+          }
+      }
+
+  *result = xmalloc (100);
+  sprintf (*result, "%s=%u", MAKELEVEL_NAME, makelevel + 1);
+  *++result = 0;
+
+  hash_free (&table, 0);
+
+  return result_0;
+}
+
+static struct variable *
+set_special_var (struct variable *var)
+{
+  if (streq (var->name, RECIPEPREFIX_NAME))
+    {
+      /* The user is resetting the command introduction prefix.  This has to
+         happen immediately, so that subsequent rules are interpreted
+         properly.  */
+      cmd_prefix = var->value[0]=='\0' ? RECIPEPREFIX_DEFAULT : var->value[0];
+    }
+
+  return var;
+}
+
+/* Given a string, shell-execute it and return a malloc'ed string of the
+ * result. This removes only ONE newline (if any) at the end, for maximum
+ * compatibility with the *BSD makes.  If it fails, returns NULL. */
+
+char *
+shell_result (const char *p)
+{
+  char *buf;
+  unsigned int len;
+  char *args[2];
+  char *result;
+
+  install_variable_buffer (&buf, &len);
+
+  args[0] = (char *) p;
+  args[1] = NULL;
+  variable_buffer_output (func_shell_base (variable_buffer, args, 0), "\0", 1);
+  result = strdup (variable_buffer);
+
+  restore_variable_buffer (buf, len);
+  return result;
+}
+
+/* Given a variable, a value, and a flavor, define the variable.
+   See the try_variable_definition() function for details on the parameters. */
+
+struct variable *
+do_variable_definition (const gmk_floc *flocp, const char *varname,
+                        const char *value, enum variable_origin origin,
+                        enum variable_flavor flavor, int target_var)
+{
+  const char *p;
+  char *alloc_value = NULL;
+  struct variable *v;
+  int append = 0;
+  int conditional = 0;
+
+  /* Calculate the variable's new value in VALUE.  */
+
+  switch (flavor)
+    {
+    default:
+    case f_bogus:
+      /* Should not be possible.  */
+      abort ();
+    case f_simple:
+      /* A simple variable definition "var := value".  Expand the value.
+         We have to allocate memory since otherwise it'll clobber the
+         variable buffer, and we may still need that if we're looking at a
+         target-specific variable.  */
+      p = alloc_value = allocated_variable_expand (value);
+      break;
+    case f_shell:
+      {
+        /* A shell definition "var != value".  Expand value, pass it to
+           the shell, and store the result in recursively-expanded var. */
+        char *q = allocated_variable_expand (value);
+        p = alloc_value = shell_result (q);
+        free (q);
+        flavor = f_recursive;
+        break;
+      }
+    case f_conditional:
+      /* A conditional variable definition "var ?= value".
+         The value is set IFF the variable is not defined yet. */
+      v = lookup_variable (varname, strlen (varname));
+      if (v)
+        return v->special ? set_special_var (v) : v;
+
+      conditional = 1;
+      flavor = f_recursive;
+      /* FALLTHROUGH */
+    case f_recursive:
+      /* A recursive variable definition "var = value".
+         The value is used verbatim.  */
+      p = value;
+      break;
+    case f_append:
+      {
+        /* If we have += but we're in a target variable context, we want to
+           append only with other variables in the context of this target.  */
+        if (target_var)
+          {
+            append = 1;
+            v = lookup_variable_in_set (varname, strlen (varname),
+                                        current_variable_set_list->set);
+
+            /* Don't append from the global set if a previous non-appending
+               target-specific variable definition exists. */
+            if (v && !v->append)
+              append = 0;
+          }
+        else
+          v = lookup_variable (varname, strlen (varname));
+
+        if (v == 0)
+          {
+            /* There was no old value.
+               This becomes a normal recursive definition.  */
+            p = value;
+            flavor = f_recursive;
+          }
+        else
+          {
+            /* Paste the old and new values together in VALUE.  */
+
+            unsigned int oldlen, vallen;
+            const char *val;
+            char *tp = NULL;
+
+            val = value;
+            if (v->recursive)
+              /* The previous definition of the variable was recursive.
+                 The new value is the unexpanded old and new values. */
+              flavor = f_recursive;
+            else
+              /* The previous definition of the variable was simple.
+                 The new value comes from the old value, which was expanded
+                 when it was set; and from the expanded new value.  Allocate
+                 memory for the expansion as we may still need the rest of the
+                 buffer if we're looking at a target-specific variable.  */
+              val = tp = allocated_variable_expand (val);
+
+            oldlen = strlen (v->value);
+            vallen = strlen (val);
+            p = alloc_value = xmalloc (oldlen + 1 + vallen + 1);
+            memcpy (alloc_value, v->value, oldlen);
+            alloc_value[oldlen] = ' ';
+            memcpy (&alloc_value[oldlen + 1], val, vallen + 1);
+
+            free (tp);
+          }
+      }
+    }
+
+#ifdef __MSDOS__
+  /* Many Unix Makefiles include a line saying "SHELL=/bin/sh", but
+     non-Unix systems don't conform to this default configuration (in
+     fact, most of them don't even have '/bin').  On the other hand,
+     $SHELL in the environment, if set, points to the real pathname of
+     the shell.
+     Therefore, we generally won't let lines like "SHELL=/bin/sh" from
+     the Makefile override $SHELL from the environment.  But first, we
+     look for the basename of the shell in the directory where SHELL=
+     points, and along the $PATH; if it is found in any of these places,
+     we define $SHELL to be the actual pathname of the shell.  Thus, if
+     you have bash.exe installed as d:/unix/bash.exe, and d:/unix is on
+     your $PATH, then SHELL=/usr/local/bin/bash will have the effect of
+     defining SHELL to be "d:/unix/bash.exe".  */
+  if ((origin == o_file || origin == o_override)
+      && strcmp (varname, "SHELL") == 0)
+    {
+      PATH_VAR (shellpath);
+      extern char * __dosexec_find_on_path (const char *, char *[], char *);
+
+      /* See if we can find "/bin/sh.exe", "/bin/sh.com", etc.  */
+      if (__dosexec_find_on_path (p, NULL, shellpath))
+        {
+          char *tp;
+
+          for (tp = shellpath; *tp; tp++)
+            if (*tp == '\\')
+              *tp = '/';
+
+          v = define_variable_loc (varname, strlen (varname),
+                                   shellpath, origin, flavor == f_recursive,
+                                   flocp);
+        }
+      else
+        {
+          const char *shellbase, *bslash;
+          struct variable *pathv = lookup_variable ("PATH", 4);
+          char *path_string;
+          char *fake_env[2];
+          size_t pathlen = 0;
+
+          shellbase = strrchr (p, '/');
+          bslash = strrchr (p, '\\');
+          if (!shellbase || bslash > shellbase)
+            shellbase = bslash;
+          if (!shellbase && p[1] == ':')
+            shellbase = p + 1;
+          if (shellbase)
+            shellbase++;
+          else
+            shellbase = p;
+
+          /* Search for the basename of the shell (with standard
+             executable extensions) along the $PATH.  */
+          if (pathv)
+            pathlen = strlen (pathv->value);
+          path_string = xmalloc (5 + pathlen + 2 + 1);
+          /* On MSDOS, current directory is considered as part of $PATH.  */
+          sprintf (path_string, "PATH=.;%s", pathv ? pathv->value : "");
+          fake_env[0] = path_string;
+          fake_env[1] = 0;
+          if (__dosexec_find_on_path (shellbase, fake_env, shellpath))
+            {
+              char *tp;
+
+              for (tp = shellpath; *tp; tp++)
+                if (*tp == '\\')
+                  *tp = '/';
+
+              v = define_variable_loc (varname, strlen (varname),
+                                       shellpath, origin,
+                                       flavor == f_recursive, flocp);
+            }
+          else
+            v = lookup_variable (varname, strlen (varname));
+
+          free (path_string);
+        }
+    }
+  else
+#endif /* __MSDOS__ */
+#ifdef WINDOWS32
+  if ((origin == o_file || origin == o_override || origin == o_command)
+      && streq (varname, "SHELL"))
+    {
+      extern const char *default_shell;
+
+      /* Call shell locator function. If it returns TRUE, then
+         set no_default_sh_exe to indicate sh was found and
+         set new value for SHELL variable.  */
+
+      if (find_and_set_default_shell (p))
+        {
+          v = define_variable_in_set (varname, strlen (varname), default_shell,
+                                      origin, flavor == f_recursive,
+                                      (target_var
+                                       ? current_variable_set_list->set
+                                       : NULL),
+                                      flocp);
+          no_default_sh_exe = 0;
+        }
+      else
+        {
+          char *tp = alloc_value;
+
+          alloc_value = allocated_variable_expand (p);
+
+          if (find_and_set_default_shell (alloc_value))
+            {
+              v = define_variable_in_set (varname, strlen (varname), p,
+                                          origin, flavor == f_recursive,
+                                          (target_var
+                                           ? current_variable_set_list->set
+                                           : NULL),
+                                          flocp);
+              no_default_sh_exe = 0;
+            }
+          else
+            v = lookup_variable (varname, strlen (varname));
+
+          free (tp);
+        }
+    }
+  else
+#endif
+
+  /* If we are defining variables inside an $(eval ...), we might have a
+     different variable context pushed, not the global context (maybe we're
+     inside a $(call ...) or something.  Since this function is only ever
+     invoked in places where we want to define globally visible variables,
+     make sure we define this variable in the global set.  */
+
+  v = define_variable_in_set (varname, strlen (varname), p,
+                              origin, flavor == f_recursive,
+                              (target_var
+                               ? current_variable_set_list->set : NULL),
+                              flocp);
+  v->append = append;
+  v->conditional = conditional;
+
+  free (alloc_value);
+
+  return v->special ? set_special_var (v) : v;
+}
+
+/* Parse P (a null-terminated string) as a variable definition.
+
+   If it is not a variable definition, return NULL and the contents of *VAR
+   are undefined, except NAME is set to the first non-space character or NIL.
+
+   If it is a variable definition, return a pointer to the char after the
+   assignment token and set the following fields (only) of *VAR:
+    name   : name of the variable (ALWAYS SET) (NOT NUL-TERMINATED!)
+    length : length of the variable name
+    value  : value of the variable (nul-terminated)
+    flavor : flavor of the variable
+   Other values in *VAR are unchanged.
+  */
+
+char *
+parse_variable_definition (const char *p, struct variable *var)
+{
+  int wspace = 0;
+  const char *e = NULL;
+
+  p = next_token (p);
+  var->name = (char *)p;
+  var->length = 0;
+
+  while (1)
+    {
+      int c = *p++;
+
+      /* If we find a comment or EOS, it's not a variable definition.  */
+      if (STOP_SET (c, MAP_COMMENT|MAP_NUL))
+        return NULL;
+
+      if (c == '$')
+        {
+          /* This begins a variable expansion reference.  Make sure we don't
+             treat chars inside the reference as assignment tokens.  */
+          char closeparen;
+          int count;
+          c = *p++;
+          if (c == '(')
+            closeparen = ')';
+          else if (c == '{')
+            closeparen = '}';
+          else
+            /* '$$' or '$X'.  Either way, nothing special to do here.  */
+            continue;
+
+          /* P now points past the opening paren or brace.
+             Count parens or braces until it is matched.  */
+          count = 0;
+          for (; *p != '\0'; ++p)
+            {
+              if (*p == c)
+                ++count;
+              else if (*p == closeparen && --count < 0)
+                {
+                  ++p;
+                  break;
+                }
+            }
+          continue;
+        }
+
+      /* If we find whitespace skip it, and remember we found it.  */
+      if (isblank ((unsigned char)c))
+        {
+          wspace = 1;
+          e = p - 1;
+          p = next_token (p);
+          c = *p;
+          if (c == '\0')
+            return NULL;
+          ++p;
+        }
+
+
+      if (c == '=')
+        {
+          var->flavor = f_recursive;
+          if (! e)
+            e = p - 1;
+          break;
+        }
+
+      /* Match assignment variants (:=, +=, ?=, !=)  */
+      if (*p == '=')
+        {
+          switch (c)
+            {
+              case ':':
+                var->flavor = f_simple;
+                break;
+              case '+':
+                var->flavor = f_append;
+                break;
+              case '?':
+                var->flavor = f_conditional;
+                break;
+              case '!':
+                var->flavor = f_shell;
+                break;
+              default:
+                /* If we skipped whitespace, non-assignments means no var.  */
+                if (wspace)
+                  return NULL;
+
+                /* Might be assignment, or might be $= or #=.  Check.  */
+                continue;
+            }
+          if (! e)
+            e = p - 1;
+          ++p;
+          break;
+        }
+
+      /* Check for POSIX ::= syntax  */
+      if (c == ':')
+        {
+          /* A colon other than :=/::= is not a variable defn.  */
+          if (*p != ':' || p[1] != '=')
+            return NULL;
+
+          /* POSIX allows ::= to be the same as GNU make's := */
+          var->flavor = f_simple;
+          if (! e)
+            e = p - 1;
+          p += 2;
+          break;
+        }
+
+      /* If we skipped whitespace, non-assignments means no var.  */
+      if (wspace)
+        return NULL;
+    }
+
+  var->length = e - var->name;
+  var->value = next_token (p);
+  return (char *)p;
+}
+
+/* Try to interpret LINE (a null-terminated string) as a variable definition.
+
+   If LINE was recognized as a variable definition, a pointer to its 'struct
+   variable' is returned.  If LINE is not a variable definition, NULL is
+   returned.  */
+
+struct variable *
+assign_variable_definition (struct variable *v, const char *line)
+{
+  char *name;
+
+  if (!parse_variable_definition (line, v))
+    return NULL;
+
+  /* Expand the name, so "$(foo)bar = baz" works.  */
+  name = alloca (v->length + 1);
+  memcpy (name, v->name, v->length);
+  name[v->length] = '\0';
+  v->name = allocated_variable_expand (name);
+
+  if (v->name[0] == '\0')
+    O (fatal, &v->fileinfo, _("empty variable name"));
+
+  return v;
+}
+
+/* Try to interpret LINE (a null-terminated string) as a variable definition.
+
+   ORIGIN may be o_file, o_override, o_env, o_env_override,
+   or o_command specifying that the variable definition comes
+   from a makefile, an override directive, the environment with
+   or without the -e switch, or the command line.
+
+   See the comments for assign_variable_definition().
+
+   If LINE was recognized as a variable definition, a pointer to its 'struct
+   variable' is returned.  If LINE is not a variable definition, NULL is
+   returned.  */
+
+struct variable *
+try_variable_definition (const gmk_floc *flocp, const char *line,
+                         enum variable_origin origin, int target_var)
+{
+  struct variable v;
+  struct variable *vp;
+
+  if (flocp != 0)
+    v.fileinfo = *flocp;
+  else
+    v.fileinfo.filenm = 0;
+
+  if (!assign_variable_definition (&v, line))
+    return 0;
+
+  vp = do_variable_definition (flocp, v.name, v.value,
+                               origin, v.flavor, target_var);
+
+  free (v.name);
+
+  return vp;
+}
+
+/* Print information for variable V, prefixing it with PREFIX.  */
+
+static void
+print_variable (const void *item, void *arg)
+{
+  const struct variable *v = item;
+  const char *prefix = arg;
+  const char *origin;
+
+  switch (v->origin)
+    {
+    case o_automatic:
+      origin = _("automatic");
+      break;
+    case o_default:
+      origin = _("default");
+      break;
+    case o_env:
+      origin = _("environment");
+      break;
+    case o_file:
+      origin = _("makefile");
+      break;
+    case o_env_override:
+      origin = _("environment under -e");
+      break;
+    case o_command:
+      origin = _("command line");
+      break;
+    case o_override:
+      origin = _("'override' directive");
+      break;
+    case o_invalid:
+    default:
+      abort ();
+    }
+  fputs ("# ", stdout);
+  fputs (origin, stdout);
+  if (v->private_var)
+    fputs (" private", stdout);
+  if (v->fileinfo.filenm)
+    printf (_(" (from '%s', line %lu)"),
+            v->fileinfo.filenm, v->fileinfo.lineno);
+  putchar ('\n');
+  fputs (prefix, stdout);
+
+  /* Is this a 'define'?  */
+  if (v->recursive && strchr (v->value, '\n') != 0)
+    printf ("define %s\n%s\nendef\n", v->name, v->value);
+  else
+    {
+      char *p;
+
+      printf ("%s %s= ", v->name, v->recursive ? v->append ? "+" : "" : ":");
+
+      /* Check if the value is just whitespace.  */
+      p = next_token (v->value);
+      if (p != v->value && *p == '\0')
+        /* All whitespace.  */
+        printf ("$(subst ,,%s)", v->value);
+      else if (v->recursive)
+        fputs (v->value, stdout);
+      else
+        /* Double up dollar signs.  */
+        for (p = v->value; *p != '\0'; ++p)
+          {
+            if (*p == '$')
+              putchar ('$');
+            putchar (*p);
+          }
+      putchar ('\n');
+    }
+}
+
+
+static void
+print_auto_variable (const void *item, void *arg)
+{
+  const struct variable *v = item;
+
+  if (v->origin == o_automatic)
+    print_variable (item, arg);
+}
+
+
+static void
+print_noauto_variable (const void *item, void *arg)
+{
+  const struct variable *v = item;
+
+  if (v->origin != o_automatic)
+    print_variable (item, arg);
+}
+
+
+/* Print all the variables in SET.  PREFIX is printed before
+   the actual variable definitions (everything else is comments).  */
+
+static void
+print_variable_set (struct variable_set *set, const char *prefix, int pauto)
+{
+  hash_map_arg (&set->table, (pauto ? print_auto_variable : print_variable),
+                (void *)prefix);
+
+  fputs (_("# variable set hash-table stats:\n"), stdout);
+  fputs ("# ", stdout);
+  hash_print_stats (&set->table, stdout);
+  putc ('\n', stdout);
+}
+
+/* Print the data base of variables.  */
+
+void
+print_variable_data_base (void)
+{
+  puts (_("\n# Variables\n"));
+
+  print_variable_set (&global_variable_set, "", 0);
+
+  puts (_("\n# Pattern-specific Variable Values"));
+
+  {
+    struct pattern_var *p;
+    int rules = 0;
+
+    for (p = pattern_vars; p != 0; p = p->next)
+      {
+        ++rules;
+        printf ("\n%s :\n", p->target);
+        print_variable (&p->variable, (void *)"# ");
+      }
+
+    if (rules == 0)
+      puts (_("\n# No pattern-specific variable values."));
+    else
+      printf (_("\n# %u pattern-specific variable values"), rules);
+  }
+}
+
+
+/* Print all the local variables of FILE.  */
+
+void
+print_file_variables (const struct file *file)
+{
+  if (file->variables != 0)
+    print_variable_set (file->variables->set, "# ", 1);
+}
+
+void
+print_target_variables (const struct file *file)
+{
+  if (file->variables != 0)
+    {
+      int l = strlen (file->name);
+      char *t = alloca (l + 3);
+
+      strcpy (t, file->name);
+      t[l] = ':';
+      t[l+1] = ' ';
+      t[l+2] = '\0';
+
+      hash_map_arg (&file->variables->set->table, print_noauto_variable, t);
+    }
+}
+
+#ifdef WINDOWS32
+void
+sync_Path_environment (void)
+{
+  char *path = allocated_variable_expand ("$(PATH)");
+  static char *environ_path = NULL;
+
+  if (!path)
+    return;
+
+  /* If done this before, free the previous entry before allocating new one.  */
+  free (environ_path);
+
+  /* Create something WINDOWS32 world can grok.  */
+  convert_Path_to_windows32 (path, ';');
+  environ_path = xstrdup (concat (3, "PATH", "=", path));
+  putenv (environ_path);
+  free (path);
+}
+#endif
diff --git a/variable.h b/variable.h
new file mode 100644
index 0000000..fa2dbbd
--- /dev/null
+++ b/variable.h
@@ -0,0 +1,236 @@
+/* Definitions for using variables in GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "hash.h"
+
+/* Codes in a variable definition saying where the definition came from.
+   Increasing numeric values signify less-overridable definitions.  */
+enum variable_origin
+  {
+    o_default,          /* Variable from the default set.  */
+    o_env,              /* Variable from environment.  */
+    o_file,             /* Variable given in a makefile.  */
+    o_env_override,     /* Variable from environment, if -e.  */
+    o_command,          /* Variable given by user.  */
+    o_override,         /* Variable from an 'override' directive.  */
+    o_automatic,        /* Automatic variable -- cannot be set.  */
+    o_invalid           /* Core dump time.  */
+  };
+
+enum variable_flavor
+  {
+    f_bogus,            /* Bogus (error) */
+    f_simple,           /* Simple definition (:= or ::=) */
+    f_recursive,        /* Recursive definition (=) */
+    f_append,           /* Appending definition (+=) */
+    f_conditional,      /* Conditional definition (?=) */
+    f_shell             /* Shell assignment (!=) */
+  };
+
+/* Structure that represents one variable definition.
+   Each bucket of the hash table is a chain of these,
+   chained through 'next'.  */
+
+#define EXP_COUNT_BITS  15      /* This gets all the bitfields into 32 bits */
+#define EXP_COUNT_MAX   ((1<<EXP_COUNT_BITS)-1)
+
+struct variable
+  {
+    char *name;                 /* Variable name.  */
+    char *value;                /* Variable value.  */
+    gmk_floc fileinfo;          /* Where the variable was defined.  */
+    int length;                 /* strlen (name) */
+    unsigned int recursive:1;   /* Gets recursively re-evaluated.  */
+    unsigned int append:1;      /* Nonzero if an appending target-specific
+                                   variable.  */
+    unsigned int conditional:1; /* Nonzero if set with a ?=. */
+    unsigned int per_target:1;  /* Nonzero if a target-specific variable.  */
+    unsigned int special:1;     /* Nonzero if this is a special variable.  */
+    unsigned int exportable:1;  /* Nonzero if the variable _could_ be
+                                   exported.  */
+    unsigned int expanding:1;   /* Nonzero if currently being expanded.  */
+    unsigned int private_var:1; /* Nonzero avoids inheritance of this
+                                   target-specific variable.  */
+    unsigned int exp_count:EXP_COUNT_BITS;
+                                /* If >1, allow this many self-referential
+                                   expansions.  */
+    enum variable_flavor
+      flavor ENUM_BITFIELD (3); /* Variable flavor.  */
+    enum variable_origin
+      origin ENUM_BITFIELD (3); /* Variable origin.  */
+    enum variable_export
+      {
+        v_export,               /* Export this variable.  */
+        v_noexport,             /* Don't export this variable.  */
+        v_ifset,                /* Export it if it has a non-default value.  */
+        v_default               /* Decide in target_environment.  */
+      } export ENUM_BITFIELD (2);
+  };
+
+/* Structure that represents a variable set.  */
+
+struct variable_set
+  {
+    struct hash_table table;    /* Hash table of variables.  */
+  };
+
+/* Structure that represents a list of variable sets.  */
+
+struct variable_set_list
+  {
+    struct variable_set_list *next;     /* Link in the chain.  */
+    struct variable_set *set;           /* Variable set.  */
+    int next_is_parent;                 /* True if next is a parent target.  */
+  };
+
+/* Structure used for pattern-specific variables.  */
+
+struct pattern_var
+  {
+    struct pattern_var *next;
+    const char *suffix;
+    const char *target;
+    unsigned int len;
+    struct variable variable;
+  };
+
+extern char *variable_buffer;
+extern struct variable_set_list *current_variable_set_list;
+extern struct variable *default_goal_var;
+
+/* expand.c */
+char *variable_buffer_output (char *ptr, const char *string, unsigned int length);
+char *variable_expand (const char *line);
+char *variable_expand_for_file (const char *line, struct file *file);
+char *allocated_variable_expand_for_file (const char *line, struct file *file);
+#define allocated_variable_expand(line) \
+  allocated_variable_expand_for_file (line, (struct file *) 0)
+char *expand_argument (const char *str, const char *end);
+char *variable_expand_string (char *line, const char *string, long length);
+void install_variable_buffer (char **bufp, unsigned int *lenp);
+void restore_variable_buffer (char *buf, unsigned int len);
+
+/* function.c */
+int handle_function (char **op, const char **stringp);
+int pattern_matches (const char *pattern, const char *percent, const char *str);
+char *subst_expand (char *o, const char *text, const char *subst,
+                    const char *replace, unsigned int slen, unsigned int rlen,
+                    int by_word);
+char *patsubst_expand_pat (char *o, const char *text, const char *pattern,
+                           const char *replace, const char *pattern_percent,
+                           const char *replace_percent);
+char *patsubst_expand (char *o, const char *text, char *pattern, char *replace);
+char *func_shell_base (char *o, char **argv, int trim_newlines);
+
+
+/* expand.c */
+char *recursively_expand_for_file (struct variable *v, struct file *file);
+#define recursively_expand(v)   recursively_expand_for_file (v, NULL)
+
+/* variable.c */
+struct variable_set_list *create_new_variable_set (void);
+void free_variable_set (struct variable_set_list *);
+struct variable_set_list *push_new_variable_scope (void);
+void pop_variable_scope (void);
+void define_automatic_variables (void);
+void initialize_file_variables (struct file *file, int reading);
+void print_file_variables (const struct file *file);
+void print_file_variables (const struct file *file);
+void print_target_variables (const struct file *file);
+void merge_variable_set_lists (struct variable_set_list **to_list,
+                               struct variable_set_list *from_list);
+struct variable *do_variable_definition (const gmk_floc *flocp,
+                                         const char *name, const char *value,
+                                         enum variable_origin origin,
+                                         enum variable_flavor flavor,
+                                         int target_var);
+char *parse_variable_definition (const char *line,
+                                 struct variable *v);
+struct variable *assign_variable_definition (struct variable *v, const char *line);
+struct variable *try_variable_definition (const gmk_floc *flocp, const char *line,
+                                          enum variable_origin origin,
+                                          int target_var);
+void init_hash_global_variable_set (void);
+void hash_init_function_table (void);
+void define_new_function(const gmk_floc *flocp, const char *name,
+                         unsigned int min, unsigned int max, unsigned int flags,
+                         gmk_func_ptr func);
+struct variable *lookup_variable (const char *name, unsigned int length);
+struct variable *lookup_variable_in_set (const char *name, unsigned int length,
+                                         const struct variable_set *set);
+
+struct variable *define_variable_in_set (const char *name, unsigned int length,
+                                         const char *value,
+                                         enum variable_origin origin,
+                                         int recursive,
+                                         struct variable_set *set,
+                                         const gmk_floc *flocp);
+
+/* Define a variable in the current variable set.  */
+
+#define define_variable(n,l,v,o,r) \
+          define_variable_in_set((n),(l),(v),(o),(r),\
+                                 current_variable_set_list->set,NILF)
+
+/* Define a variable with a constant name in the current variable set.  */
+
+#define define_variable_cname(n,v,o,r) \
+          define_variable_in_set((n),(sizeof (n) - 1),(v),(o),(r),\
+                                 current_variable_set_list->set,NILF)
+
+/* Define a variable with a location in the current variable set.  */
+
+#define define_variable_loc(n,l,v,o,r,f) \
+          define_variable_in_set((n),(l),(v),(o),(r),\
+                                 current_variable_set_list->set,(f))
+
+/* Define a variable with a location in the global variable set.  */
+
+#define define_variable_global(n,l,v,o,r,f) \
+          define_variable_in_set((n),(l),(v),(o),(r),NULL,(f))
+
+/* Define a variable in FILE's variable set.  */
+
+#define define_variable_for_file(n,l,v,o,r,f) \
+          define_variable_in_set((n),(l),(v),(o),(r),(f)->variables->set,NILF)
+
+void undefine_variable_in_set (const char *name, unsigned int length,
+                               enum variable_origin origin,
+                               struct variable_set *set);
+
+/* Remove variable from the current variable set. */
+
+#define undefine_variable_global(n,l,o) \
+          undefine_variable_in_set((n),(l),(o),NULL)
+
+/* Warn that NAME is an undefined variable.  */
+
+#define warn_undefined(n,l) do{\
+                              if (warn_undefined_variables_flag)        \
+                                error (reading_file, (l),               \
+                                       _("warning: undefined variable '%.*s'"), \
+                                       (int)(l), (n));                  \
+                              }while(0)
+
+char **target_environment (struct file *file);
+
+struct pattern_var *create_pattern_var (const char *target,
+                                        const char *suffix);
+
+extern int export_all_variables;
+
+#define MAKELEVEL_NAME "MAKELEVEL"
+#define MAKELEVEL_LENGTH (CSTRLEN (MAKELEVEL_NAME))
diff --git a/version.c b/version.c
new file mode 100644
index 0000000..d94ecec
--- /dev/null
+++ b/version.c
@@ -0,0 +1,33 @@
+/* Record version and build host architecture for GNU make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* We use <config.h> instead of "config.h" so that a compilation
+   using -I. -I$srcdir will use ./config.h rather than $srcdir/config.h
+   (which it would do because makeint.h was found in $srcdir).  */
+#include <config.h>
+
+#ifndef MAKE_HOST
+# define MAKE_HOST "unknown"
+#endif
+
+const char *version_string = VERSION;
+const char *make_host = MAKE_HOST;
+
+/*
+  Local variables:
+  version-control: never
+  End:
+ */
diff --git a/vmsdir.h b/vmsdir.h
new file mode 100644
index 0000000..3be3f0c
--- /dev/null
+++ b/vmsdir.h
@@ -0,0 +1,76 @@
+/* dirent.h for vms
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef VMSDIR_H
+#define VMSDIR_H
+
+#include <rms.h>
+
+#define	MAXNAMLEN	255
+
+#ifndef __DECC
+#if !defined (__GNUC__) && !defined (__ALPHA)
+typedef unsigned long u_long;
+typedef unsigned short u_short;
+#endif
+#endif
+
+struct direct
+{
+  off_t d_off;
+  u_long d_fileno;
+  u_short d_reclen;
+  u_short d_namlen;
+  char d_name[MAXNAMLEN + 1];
+};
+
+#undef DIRSIZ
+#define DIRSIZ(dp)		\
+  (((sizeof (struct direct)	\
+     - (MAXNAMLEN+1)		\
+     + ((dp)->d_namlen+1))	\
+    + 3) & ~3)
+
+#define d_ino	d_fileno		/* compatibility */
+
+
+/*
+ * Definitions for library routines operating on directories.
+ */
+
+typedef struct DIR
+{
+  struct direct dir;
+  char d_result[MAXNAMLEN + 1];
+#if defined (__ALPHA) || defined (__DECC)
+  struct FAB fab;
+#else
+  struct fabdef fab;
+#endif
+} DIR;
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define rewinddir(dirp)	seekdir((dirp), (long)0)
+
+DIR *opendir ();
+struct direct *readdir (DIR *dfd);
+int closedir (DIR *dfd);
+const char *vmsify (const char *name, int type);
+
+#endif /* VMSDIR_H */
diff --git a/vmsfunctions.c b/vmsfunctions.c
new file mode 100644
index 0000000..6ed136c
--- /dev/null
+++ b/vmsfunctions.c
@@ -0,0 +1,226 @@
+/* VMS functions
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "debug.h"
+#include "job.h"
+
+#include <ctype.h>
+#include <string.h>
+
+#ifdef __DECC
+#include <starlet.h>
+#endif
+
+#include <rms.h>
+#include "vmsdir.h"
+
+#ifdef HAVE_VMSDIR_H
+
+DIR *
+opendir (char *dspec)
+{
+  struct DIR *dir  = xcalloc (sizeof (struct DIR));
+  struct NAM *dnam = xmalloc (sizeof (struct NAM));
+  struct FAB *dfab = &dir->fab;
+  char *searchspec = xmalloc (MAXNAMLEN + 1);
+
+  *dfab = cc$rms_fab;
+  *dnam = cc$rms_nam;
+  sprintf (searchspec, "%s*.*;", dspec);
+
+  dfab->fab$l_fna = searchspec;
+  dfab->fab$b_fns = strlen (searchspec);
+  dfab->fab$l_nam = dnam;
+
+  *dnam = cc$rms_nam;
+  dnam->nam$l_esa = searchspec;
+  dnam->nam$b_ess = MAXNAMLEN;
+
+  if (! (sys$parse (dfab) & 1))
+    {
+      free (dir);
+      free (dnam);
+      free (searchspec);
+      return (NULL);
+    }
+
+  return dir;
+}
+
+#define uppercasify(str) \
+  do \
+    { \
+      char *tmp; \
+      for (tmp = (str); *tmp != '\0'; tmp++) \
+        if (islower ((unsigned char)*tmp)) \
+          *tmp = toupper ((unsigned char)*tmp); \
+    } \
+  while (0)
+
+struct direct *
+readdir (DIR *dir)
+{
+  struct FAB *dfab = &dir->fab;
+  struct NAM *dnam = (struct NAM *)(dfab->fab$l_nam);
+  struct direct *dentry = &dir->dir;
+  int i;
+
+  memset (dentry, 0, sizeof *dentry);
+
+  dnam->nam$l_rsa = dir->d_result;
+  dnam->nam$b_rss = MAXNAMLEN;
+
+  DB (DB_VERBOSE, ("."));
+
+  if (!((i = sys$search (dfab)) & 1))
+    {
+      DB (DB_VERBOSE, (_("sys$search() failed with %d\n"), i));
+      return (NULL);
+    }
+
+  dentry->d_off = 0;
+  if (dnam->nam$w_fid == 0)
+    dentry->d_fileno = 1;
+  else
+    dentry->d_fileno = dnam->nam$w_fid[0] + (dnam->nam$w_fid[1] << 16);
+
+  dentry->d_reclen = sizeof (struct direct);
+  dentry->d_namlen = dnam->nam$b_name + dnam->nam$b_type;
+  strncpy (dentry->d_name, dnam->nam$l_name, dentry->d_namlen);
+  dentry->d_name[dentry->d_namlen] = '\0';
+
+#ifdef HAVE_CASE_INSENSITIVE_FS
+  uppercasify (dentry->d_name);
+#endif
+
+  return (dentry);
+}
+
+int
+closedir (DIR *dir)
+{
+  if (dir != NULL)
+    {
+      struct FAB *dfab = &dir->fab;
+      struct NAM *dnam = (struct NAM *)(dfab->fab$l_nam);
+      if (dnam != NULL)
+	free (dnam->nam$l_esa);
+      free (dnam);
+      free (dir);
+    }
+
+  return 0;
+}
+#endif /* compiled for OpenVMS prior to V7.x */
+
+/* Argv0 will be a full vms file specification, like
+   node$dka100:[utils.gnumake]make.exe;47
+   prefix it with "mcr " to make it a vms command, executable for DCL. */
+const char *
+vms_command(const char* argv0)
+{
+  size_t l = strlen(argv0) + 1;
+  char* s = xmalloc(l + 4);
+  memcpy(s, "mcr ", 4);
+  memcpy(s+4, argv0, l);
+  return s;
+}
+
+/* Argv0 aka argv[0] will be a full vms file specification, like
+   node$dka100:[utils.gnumake]make.exe;47, set up by the CRTL.
+   The vms progname should be ^^^^, the file name without
+   file type .exe and ;version.
+   Use sys$parse to get the name part of the file specification. That is
+   in the above example, pick up "make" and return a copy of that string.
+   If something goes wrong in sys$parse (unlikely, this is a VMS/CRTL supplied
+   file specification) or if there is an empty name part (not easy to produce,
+   but it is possible) just return "make".
+   Somes notes ...
+   NAM[L]$M_SYNCHK requests a syntax check, only.
+   NAM is for ODS2 names (shorter parts, output usually converted to UPPERCASE).
+   NAML is for ODS2/ODS5 names (longer parts, output unchanged).
+   NAM$M_NO_SHORT_UPCASE may not be available for older versions of VMS.
+   NAML is not available on older versions of VMS (NAML$C_BID not defined).
+   argv[0] on older versions of VMS (no extended parse style and no
+   CRTL feature DECC$ARGV_PARSE_STYLE) is always in lowercase. */
+const char *
+vms_progname(const char* argv0)
+{
+  int status;
+  static struct FAB fab;
+  char *progname;
+  const char *fallback = "make";
+
+#ifdef NAML$C_BID
+  static char esa[NAML$C_MAXRSS];
+  static struct NAML naml;
+#else
+  static char esa[NAM$C_MAXRSS];
+  static struct NAM nam;
+#endif
+
+  fab = cc$rms_fab;
+  fab.fab$l_fna = (char*)argv0;
+  fab.fab$b_fns = strlen(argv0);
+
+#ifdef NAML$C_BID
+  fab.fab$l_naml = &naml;
+  naml = cc$rms_naml;
+  naml.naml$l_long_expand = esa;
+  naml.naml$l_long_expand_alloc = NAML$C_MAXRSS;
+  naml.naml$b_nop = NAML$M_SYNCHK;
+  naml.naml$l_input_flags = NAML$M_NO_SHORT_OUTPUT;
+#else
+  fab.fab$l_nam = &nam;
+  nam = cc$rms_nam;
+  nam.nam$l_esa = esa;
+  nam.nam$b_ess = NAM$C_MAXRSS;
+# ifdef NAM$M_NO_SHORT_UPCASE
+  nam.nam$b_nop = NAM$M_SYNCHK | NAM$M_NO_SHORT_UPCASE;
+# else
+  nam.nam$b_nop = NAM$M_SYNCHK;
+# endif
+#endif
+
+  status = sys$parse(&fab);
+  if (!(status & 1))
+    return fallback;
+
+#ifdef NAML$C_BID
+  if (naml.naml$l_long_name_size == 0)
+    return fallback;
+  progname = xmalloc(naml.naml$l_long_name_size + 1);
+  memcpy(progname, naml.naml$l_long_name, naml.naml$l_long_name_size);
+  progname[naml.naml$l_long_name_size] = '\0';
+#else
+  if (nam.nam$b_name == 0)
+    return fallback;
+  progname = xmalloc(nam.nam$b_name + 1);
+# ifdef NAM$M_NO_SHORT_UPCASE
+  memcpy(progname, nam.nam$l_name, nam.nam$b_name);
+# else
+    {
+      int i;
+      for (i = 0; i < nam.nam$b_name; i++)
+        progname[i] = tolower(nam.nam$l_name[i]);
+    }
+# endif
+  progname[nam.nam$b_name] = '\0';
+#endif
+
+  return progname;
+}
diff --git a/vmsify.c b/vmsify.c
new file mode 100644
index 0000000..02bdbf5
--- /dev/null
+++ b/vmsify.c
@@ -0,0 +1,1005 @@
+/* vmsify.c -- Module for vms <-> unix file name conversion
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Klaus Kämpf (kkaempf@progis.de)
+   of proGIS Software, Aachen, Germany */
+
+
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+
+#include "makeint.h"
+
+#if VMS
+#include <unixlib.h>
+#include <stdlib.h>
+#include <jpidef.h>
+#include <descrip.h>
+#include <uaidef.h>
+#include <ssdef.h>
+#include <starlet.h>
+#include <lib$routines.h>
+/* Initialize a string descriptor (struct dsc$descriptor_s) for an
+   arbitrary string.   ADDR is a pointer to the first character
+   of the string, and LEN is the length of the string. */
+
+#define INIT_DSC_S(dsc, addr, len) do { \
+  (dsc).dsc$b_dtype = DSC$K_DTYPE_T;    \
+  (dsc).dsc$b_class = DSC$K_CLASS_S;    \
+  (dsc).dsc$w_length = (len);           \
+  (dsc).dsc$a_pointer = (addr);         \
+} while (0)
+
+/* Initialize a string descriptor (struct dsc$descriptor_s) for a
+   NUL-terminated string.  S is a pointer to the string; the length
+   is determined by calling strlen(). */
+
+#define INIT_DSC_CSTRING(dsc, s) INIT_DSC_S(dsc, s, strlen(s))
+#endif
+
+/*
+  copy 'from' to 'to' up to but not including 'upto'
+  return 0 if eos on from
+  return 1 if upto found
+
+  return 'to' at last char + 1
+  return 'from' at match + 1 or eos if no match
+
+  if as_dir == 1, change all '.' to '_'
+  else change all '.' but the last to '_'
+*/
+
+static int
+copyto (char **to, const char **from, char upto, int as_dir)
+{
+  const char *s;
+
+  s = strrchr (*from, '.');
+
+  while (**from)
+    {
+      if (**from == upto)
+	{
+	  do
+	    {
+	      (*from)++;
+	    }
+	  while (**from == upto);
+	  return 1;
+	}
+      if (**from == '.')
+	{
+	  if ((as_dir == 1)
+	      || (*from != s))
+	    **to = '_';
+	  else
+	    **to = '.';
+	}
+      else
+	{
+#ifdef HAVE_CASE_INSENSITIVE_FS
+	  if (isupper ((unsigned char)**from))
+	    **to = tolower ((unsigned char)**from);
+	  else
+#endif
+	    **to = **from;
+	}
+      (*to)++;
+      (*from)++;
+    }
+
+  return 0;
+}
+
+
+/*
+  get translation of logical name
+
+*/
+
+static char *
+trnlog (const char *name)
+{
+  int stat;
+  static char reslt[1024];
+  $DESCRIPTOR (reslt_dsc, reslt);
+  short resltlen;
+  struct dsc$descriptor_s name_dsc;
+  char *s;
+
+  /*
+   * the string isn't changed, but there is no string descriptor with
+   * "const char *dsc$a_pointer"
+   */
+  INIT_DSC_CSTRING (name_dsc, (char *)name);
+
+  stat = lib$sys_trnlog (&name_dsc, &resltlen, &reslt_dsc);
+
+  if ((stat&1) == 0)
+    {
+      return "";
+    }
+  if (stat == SS$_NOTRAN)
+    {
+      return "";
+    }
+  reslt[resltlen] = '\0';
+
+  s = xmalloc (resltlen+1);
+  strcpy (s, reslt);
+  return s;
+}
+
+static char *
+showall (char *s)
+{
+  static char t[512];
+  char *pt;
+
+  pt = t;
+  if (strchr (s, '\\') == 0)
+    return s;
+  while (*s)
+    {
+      if (*s == '\\')
+	{
+	  *pt++ = *s;
+	}
+      *pt++ = *s++;
+    }
+  return pt;
+}
+
+
+enum namestate { N_START, N_DEVICE, N_OPEN, N_DOT, N_CLOSED, N_DONE };
+
+/*
+  convert unix style name to vms style
+  type = 0 -> name is a full name (directory and filename part)
+  type = 1 -> name is a directory
+  type = 2 -> name is a filename without directory
+
+  The following conversions are applied
+			(0)		(1)			(2)
+	input		full name	dir name		file name
+
+1	./		<cwd>		[]			<current directory>.dir
+2	../		<home of cwd>	<home of cwd>		<home of cwd>.dir
+
+3	//		<dev of cwd>:	<dev of cwd>:[000000]	<dev of cwd>:000000.dir
+4	//a		a:		a:			a:
+5	//a/		a:		a:			a:000000.dir
+
+9	/		[000000]	[000000]		000000.dir
+10	/a		[000000]a	[a]			[000000]a
+11	/a/		[a]		[a]			[000000]a.dir
+12	/a/b		[a]b		[a.b]			[a]b
+13	/a/b/		[a.b]		[a.b]			[a]b.dir
+14	/a/b/c		[a.b]c		[a.b.c]			[a.b]c
+15	/a/b/c/		[a.b.c]		[a.b.c]			[a.b]c.dir
+
+16	a		a		[.a]			a
+17	a/		[.a]		[.a]			a.dir
+18	a/b		[.a]b		[.a.b]			[.a]b
+19	a/b/		[.a.b]		[.a.b]			[.a]b.dir
+20	a/b/c		[.a.b]c		[.a.b.c]		[.a.b]c
+21	a/b/c/		[.a.b.c]	[.a.b.c]		[.a.b]c.dir
+
+22	a.b.c		a_b.c		[.a_b_c]		a_b_c.dir
+
+23	[x][y]z		[x.y]z		[x.y]z			[x.y]z
+24	[x][.y]z	[x.y]z		[x.y]z			[x.y]z
+
+25  filenames with '$'  are left unchanged if they contain no '/'
+25  filenames with ':' are left unchanged
+26  filenames with a single pair of '[' ']' are left unchanged
+
+  The input string is not written to.  The result is also const because
+  it's a static buffer; we don't want to change it.
+*/
+
+const char *
+vmsify (const char *name, int type)
+{
+/* max 255 device
+   max 39 directory
+   max 39 filename
+   max 39 filetype
+   max 5 version
+*/
+/* todo: VMSMAXPATHLEN is defined for ODS2 names: it needs to be adjusted. */
+#define VMSMAXPATHLEN 512
+
+  enum namestate nstate;
+  static char vmsname[VMSMAXPATHLEN+1];
+  const char *fptr;
+  const char *t;
+  char *vptr;
+  int as_dir;
+  int count;
+  const char *s;
+  const char *s1;
+  const char *s2;
+
+  if (name == 0)
+    return 0;
+  fptr = name;
+  vptr = vmsname;
+  nstate = N_START;
+
+  /* case 25a */
+  t = strpbrk (name, "$:");
+
+  if (t != 0)
+    {
+//      const char *s1;
+//      const char *s2;
+
+      if (type == 1)
+        {
+          s1 = strchr (t+1, '[');
+          s2 = strchr (t+1, ']');
+        }
+
+      if (*t == '$')
+        {
+          if (strchr (name, '/') == 0)
+            {
+              strcpy (vmsname, name);
+              if ((type == 1) && (s1 != 0) && (s2 == 0))
+                strcat (vmsname, "]");
+              return vmsname;
+            }
+        }
+      else
+        {
+          strcpy (vmsname, name);
+          if ((type == 1) && (s1 != 0) && (s2 == 0))
+            strcat (vmsname, "]");
+          return vmsname;
+        }
+    }
+
+  /* case 26 */
+  t = strchr (name, '[');
+
+  if (t != 0)
+    {
+//      const char *s;
+//      const char *s1 = strchr (t+1, '[');
+      s1 = strchr (t+1, '[');
+      if (s1 == 0)
+	{
+          strcpy (vmsname, name);
+	  if ((type == 1) && (strchr (t+1, ']') == 0))
+            strcat (vmsname, "]");
+          return vmsname;
+	}
+      s1--;
+      if (*s1 != ']')
+	{
+          strcpy (vmsname, name);
+	  return vmsname;		/* not ][, keep unchanged */
+	}
+
+      /* we have ][ */
+
+      s = name;
+
+      /* s  -> starting char
+	 s1 -> ending ']'  */
+      do
+	{
+	  strncpy (vptr, s, s1-s);	/* copy up to but not including ']' */
+	  vptr += s1-s;
+	  if (*s1 == 0)
+	    break;
+	  s = s1 + 1;			/* s -> char behind ']' */
+	  if (*s != '[')		/* was '][' ? */
+	    break;			/* no, last ] found, exit */
+	  s++;
+	  if (*s != '.')
+	    *vptr++ = '.';
+	  s1 = strchr (s, ']');
+	  if (s1 == 0)			/* no closing ] */
+	    s1 = s + strlen (s);
+	}
+      while (1);
+
+      *vptr++ = ']';
+
+      fptr = s;
+
+    }
+  else		/* no [ in name */
+    {
+      int state = 0;
+      int rooted = 1;	/* flag if logical is rooted, else insert [000000] */
+
+      do
+	{
+      switch (state)
+	{
+	  case 0:				/* start of loop */
+	    if (*fptr == '/')
+	      {
+		fptr++;
+		state = 1;
+	      }
+	    else if (*fptr == '.')
+	      {
+		fptr++;
+		state = 10;
+	      }
+	    else
+	      state = 2;
+	    break;
+
+	  case 1:				/* '/' at start */
+	    if (*fptr == '/')
+	      {
+		fptr++;
+		state = 3;
+	      }
+	    else
+	      state = 4;
+	    break;
+
+	  case 2:				/* no '/' at start */
+            {
+            const char *s = strchr (fptr, '/');
+	    if (s == 0)			/* no '/' (16) */
+	      {
+		if (type == 1)
+		  {
+		    strcpy (vptr, "[.");
+		    vptr += 2;
+		  }
+		copyto (&vptr, &fptr, 0, (type==1));
+		if (type == 1)
+		  *vptr++ = ']';
+		state = -1;
+	      }
+	    else			/* found '/' (17..21) */
+	      {
+		if ((type == 2)
+		    && (*(s+1) == 0))	/* 17(2) */
+		  {
+		    copyto (&vptr, &fptr, '/', 1);
+		    state = 7;
+		  }
+		else
+		  {
+		    strcpy (vptr, "[.");
+		    vptr += 2;
+		    copyto (&vptr, &fptr, '/', 1);
+		    nstate = N_OPEN;
+		    state = 9;
+		  }
+	      }
+	    break;
+            }
+
+	  case 3:				/* '//' at start */
+            {
+//            const char *s;
+//            const char *s1;
+            char *vp;
+	    while (*fptr == '/')	/* collapse all '/' */
+	      fptr++;
+	    if (*fptr == 0)		/* just // */
+	      {
+		char cwdbuf[VMSMAXPATHLEN+1];
+
+		s1 = getcwd(cwdbuf, VMSMAXPATHLEN);
+		if (s1 == 0)
+		  {
+                    vmsname[0] = '\0';
+		    return vmsname;	/* FIXME, err getcwd */
+		  }
+		s = strchr (s1, ':');
+		if (s == 0)
+		  {
+                    vmsname[0] = '\0';
+		    return vmsname;	/* FIXME, err no device */
+		  }
+		strncpy (vptr, s1, s-s1+1);
+		vptr += s-s1+1;
+		state = -1;
+		break;
+	      }
+
+	    s = vptr;
+
+	    if (copyto (&vptr, &fptr, '/', 1) == 0)	/* copy device part */
+	      {
+		*vptr++ = ':';
+		state = -1;
+		break;
+	      }
+	    *vptr = ':';
+	    nstate = N_DEVICE;
+	    if (*fptr == 0)	/* just '//a/' */
+	      {
+		strcpy (vptr+1, "[000000]");
+		vptr += 9;
+		state = -1;
+		break;
+	      }
+	    *vptr = 0;
+				/* check logical for [000000] insertion */
+	    vp = trnlog (s);
+	    if (*vp != '\0')
+	      {			/* found translation */
+		for (;;)	/* loop over all nested logicals */
+		  {
+		    char *vp2 = vp + strlen (vp) - 1;
+		    if (*vp2 == ':')	/* translation ends in ':' */
+		      {
+			vp2 = trnlog (vp);
+			free (vp);
+			if (*vp2 == 0)
+			  {
+			    rooted = 0;
+			    break;
+			  }
+			vp = vp2;
+			continue;	/* next iteration */
+		      }
+		    if (*vp2 == ']')	/* translation ends in ']' */
+		      {
+			if (*(vp2-1) == '.')	/* ends in '.]' */
+			  {
+			    if (strncmp (fptr, "000000", 6) != 0)
+			      rooted = 0;
+			  }
+			else
+			  {
+			    strcpy (vmsname, s1);
+			    vp = strchr (vmsname, ']');
+			    *vp = '.';
+			    nstate = N_DOT;
+			    vptr = vp;
+			  }
+		      }
+		    break;
+		  }
+		free (vp);
+	      }
+	    else
+	      rooted = 0;
+
+	    if (*vptr == 0)
+	      {
+		nstate = N_DEVICE;
+	        *vptr++ = ':';
+	      }
+	    else
+	      vptr++;
+
+	    if (rooted == 0)
+	      {
+		nstate = N_DOT;
+	        strcpy (vptr, "[000000.");
+		vptr += 8;
+		vp = vptr-1;
+	      }
+	    else
+	      vp = 0;
+
+            /* vp-> '.' after 000000 or NULL */
+
+	    s = strchr (fptr, '/');
+	    if (s == 0)
+	      {				/* no next '/' */
+		if (*(vptr-1) == '.')
+		  *(vptr-1) = ']';
+		else if (rooted == 0)
+		  *vptr++ = ']';
+		copyto (&vptr, &fptr, 0, (type == 1));
+		state = -1;
+		break;
+	      }
+	    else
+	      {
+		while (*(s+1) == '/')	/* skip multiple '/' */
+		  s++;
+	      }
+
+	    if ((rooted != 0)
+	        && (*(vptr-1) != '.'))
+	      {
+		*vptr++ = '[';
+		nstate = N_DOT;
+	      }
+	    else
+	      if ((nstate == N_DOT)
+		 && (vp != 0)
+		 && (*(s+1) == 0))
+		{
+		  if (type == 2)
+		    {
+		      *vp = ']';
+		      nstate = N_CLOSED;
+		    }
+		}
+	    state = 9;
+	    break;
+            }
+	  case 4:				/* single '/' at start (9..15) */
+	    if (*fptr == 0)
+	      state = 5;
+	    else
+	      state = 6;
+	    break;
+
+	  case 5:				/* just '/' at start (9) */
+	    if (type != 2)
+	      {
+	        *vptr++ = '[';
+		nstate = N_OPEN;
+	      }
+	    strcpy (vptr, "000000");
+	    vptr += 6;
+	    if (type == 2)
+	      state = 7;
+	    else
+	      state = 8;
+	    break;
+
+	  case 6:		/* chars following '/' at start 10..15 */
+            {
+            const char *s;
+	    *vptr++ = '[';
+	    nstate = N_OPEN;
+	    s = strchr (fptr, '/');
+	    if (s == 0)			/* 10 */
+	      {
+		if (type != 1)
+		  {
+		    strcpy (vptr, "000000]");
+		    vptr += 7;
+		  }
+		copyto (&vptr, &fptr, 0, (type == 1));
+		if (type == 1)
+		  {
+		    *vptr++ = ']';
+		  }
+		state = -1;
+	      }
+	    else			/* 11..15 */
+	      {
+		if ( (type == 2)
+		   && (*(s+1) == 0))	/* 11(2) */
+		  {
+		    strcpy (vptr, "000000]");
+		    nstate = N_CLOSED;
+		    vptr += 7;
+		  }
+		copyto (&vptr, &fptr, '/', (*(vptr-1) != ']'));
+		state = 9;
+	      }
+	    break;
+            }
+
+	  case 7:				/* add '.dir' and exit */
+	    if ((nstate == N_OPEN)
+		|| (nstate == N_DOT))
+	      {
+		char *vp = vptr-1;
+		while (vp > vmsname)
+		  {
+		    if (*vp == ']')
+		      {
+			break;
+		      }
+		    if (*vp == '.')
+		      {
+			*vp = ']';
+			break;
+		      }
+		    vp--;
+		  }
+	      }
+	    strcpy (vptr, ".dir");
+	    vptr += 4;
+	    state = -1;
+	    break;
+
+	  case 8:				/* add ']' and exit */
+	    *vptr++ = ']';
+	    state = -1;
+	    break;
+
+	  case 9:			/* 17..21, fptr -> 1st '/' + 1 */
+            {
+            const char *s;
+	    if (*fptr == 0)
+	      {
+		if (type == 2)
+		  {
+		    state = 7;
+		  }
+		else
+		  state = 8;
+		break;
+	      }
+	    s = strchr (fptr, '/');
+	    if (s == 0)
+	      {
+		if (type != 1)
+		  {
+		    if (nstate == N_OPEN)
+		      {
+			*vptr++ = ']';
+			nstate = N_CLOSED;
+		      }
+		    as_dir = 0;
+		  }
+		else
+		  {
+		    if (nstate == N_OPEN)
+		      {
+			*vptr++ = '.';
+			nstate = N_DOT;
+		      }
+		    as_dir = 1;
+		  }
+	      }
+	    else
+	      {
+		while (*(s+1) == '/')
+		  s++;
+		if ( (type == 2)
+		    && (*(s+1) == 0))		/* 19(2), 21(2)*/
+		  {
+		    if (nstate != N_CLOSED)
+		      {
+			*vptr++ = ']';
+			nstate = N_CLOSED;
+		      }
+		    as_dir = 1;
+		  }
+		else
+		  {
+		    if (nstate == N_OPEN)
+		      {
+			*vptr++ = '.';
+			nstate = N_DOT;
+		      }
+		    as_dir = 1;
+		  }
+	      }
+	    if ( (*fptr == '.')			/* check for '..' or '../' */
+		&& (*(fptr+1) == '.')
+		&& ((*(fptr+2) == '/')
+		    || (*(fptr+2) == 0)) )
+	      {
+                char *vp;
+		fptr += 2;
+		if (*fptr == '/')
+		  {
+		    do
+		      {
+			fptr++;
+		      }
+		    while (*fptr == '/');
+		  }
+		else if (*fptr == 0)
+		  type = 1;
+		vptr--;				/* vptr -> '.' or ']' */
+		vp = vptr;
+		for (;;)
+		  {
+		    vp--;
+		    if (*vp == '.')		/* one back */
+		      {
+			vptr = vp;
+			nstate = N_OPEN;
+			break;
+		      }
+		    if (*vp == '[')		/* top level reached */
+		      {
+			if (*fptr == 0)
+			  {
+			    strcpy (vp, "[000000]");
+			    vptr = vp + 8;
+			    nstate = N_CLOSED;
+			    s = 0;
+			    break;
+			  }
+			else
+			  {
+			    vptr = vp+1;
+			    nstate = N_OPEN;
+			    break;
+			  }
+		      }
+		  }
+	      }
+	    else
+	      {
+		copyto (&vptr, &fptr, '/', as_dir);
+		if (nstate == N_DOT)
+		  nstate = N_OPEN;
+	      }
+	    if (s == 0)
+	      {					/* 18,20 */
+		if (type == 1)
+		  *vptr++ = ']';
+		state = -1;
+	      }
+	    else
+	      {
+		if (*(s+1) == 0)
+		  {
+		    if (type == 2)		/* 19,21 */
+		      {
+		        state = 7;
+		      }
+		    else
+		      {
+			*vptr++ = ']';
+			state = -1;
+		      }
+		  }
+	      }
+	    break;
+            }
+
+	  case 10:				/* 1,2 first is '.' */
+	    if (*fptr == '.')
+	      {
+		fptr++;
+		state = 11;
+	      }
+	    else
+	      state = 12;
+	    break;
+
+	  case 11:				/* 2, '..' at start */
+	    count = 1;
+	    if (*fptr != 0)
+	      {
+		if (*fptr != '/')		/* got ..xxx */
+		  {
+                    strcpy (vmsname, name);
+		    return vmsname;
+		  }
+		do				/* got ../ */
+		  {
+		    fptr++;
+		    while (*fptr == '/') fptr++;
+		    if (*fptr != '.')
+		      break;
+		    if (*(fptr+1) != '.')
+		      break;
+		    fptr += 2;
+		    if ((*fptr == 0)
+			|| (*fptr == '/'))
+		      count++;
+		  }
+		while (*fptr == '/');
+	      }
+	    {					/* got '..' or '../' */
+              char *vp;
+	      char cwdbuf[VMSMAXPATHLEN+1];
+
+	      vp = getcwd(cwdbuf, VMSMAXPATHLEN);
+	      if (vp == 0)
+		{
+                  vmsname[0] = '\0';
+		  return vmsname;    /* FIXME, err getcwd */
+		}
+	      strcpy (vptr, vp);
+	      vp = strchr (vptr, ']');
+	      if (vp != 0)
+		{
+		  nstate = N_OPEN;
+		  while (vp > vptr)
+		    {
+		      vp--;
+		      if (*vp == '[')
+			{
+			  vp++;
+			  strcpy (vp, "000000]");
+			  state = -1;
+			  break;
+			}
+		      else if (*vp == '.')
+			{
+			  if (--count == 0)
+			    {
+			      if (*fptr == 0)	/* had '..' or '../' */
+				{
+				  *vp++ = ']';
+				  state = -1;
+				}
+			      else			/* had '../xxx' */
+				{
+				  state = 9;
+				}
+			      *vp = '\0';
+			      break;
+			    }
+			}
+		    }
+		}
+	      vptr += strlen (vptr);
+	    }
+	    break;
+
+	  case 12:				/* 1, '.' at start */
+	    if (*fptr != 0)
+	      {
+		if (*fptr != '/')
+		  {
+                    strcpy (vmsname, name);
+		    return vmsname;
+		  }
+		while (*fptr == '/')
+		  fptr++;
+	      }
+
+	    {
+              char *vp;
+	      char cwdbuf[VMSMAXPATHLEN+1];
+
+	      vp = getcwd(cwdbuf, VMSMAXPATHLEN);
+	      if (vp == 0)
+		{
+                  vmsname[0] = '\0';
+		  return vmsname;    /*FIXME, err getcwd */
+		}
+	      strcpy (vptr, vp);
+            }
+            if (*fptr == 0)
+              {
+                state = -1;
+                break;
+              }
+            else
+              {
+                char *vp = strchr (vptr, ']');
+                if (vp == 0)
+                  {
+                    state = -1;
+                    break;
+                  }
+                *vp = '\0';
+                nstate = N_OPEN;
+                vptr += strlen (vptr);
+                state = 9;
+              }
+	    break;
+	}
+
+	}
+      while (state > 0);
+
+
+    }
+
+
+  /* directory conversion done
+     fptr -> filename part of input string
+     vptr -> free space in vmsname
+  */
+
+  *vptr++ = 0;
+
+  return vmsname;
+}
+
+
+
+/*
+  convert from vms-style to unix-style
+
+  dev:[dir1.dir2]	//dev/dir1/dir2/
+*/
+
+const char *
+unixify (const char *name)
+{
+  static char piece[512];
+  const char *s;
+  char *p;
+
+  if (strchr (name, '/') != 0)		/* already in unix style */
+    {
+      strcpy (piece, name);
+      return piece;
+    }
+
+  p = piece;
+  *p = 0;
+
+  /* device part */
+
+  s = strchr (name, ':');
+
+  if (s != 0)
+    {
+      int l = s - name;
+      *p++ = '/';
+      *p++ = '/';
+      strncpy (p, name, l);
+      p += l;
+    }
+
+  /* directory part */
+
+  *p++ = '/';
+  s = strchr (name, '[');
+
+  if (s != 0)
+    {
+      s++;
+      switch (*s)
+        {
+	  case ']':		/* [] */
+	    strcat (p, "./");
+	    break;
+	  case '-':		/* [- */
+	    strcat (p, "../");
+	    break;
+	  case '.':
+	    strcat (p, "./");	/* [. */
+	    break;
+	  default:
+	    s--;
+	    break;
+        }
+      s++;
+      while (*s)
+        {
+	  if (*s == '.')
+	    *p++ = '/';
+	  else
+	    *p++ = *s;
+	  s++;
+	  if (*s == ']')
+	    {
+	      s++;
+	      break;
+	    }
+        }
+      if (*s != 0)		/* more after ']' ?? */
+        {
+	  if (*(p-1) != '/')
+	    *p++ = '/';
+	  strcpy (p, s);		/* copy it anyway */
+        }
+    }
+
+  else		/* no '[' anywhere */
+
+    {
+      *p++ = 0;
+    }
+
+  /* force end with '/' */
+
+  if (*(p-1) != '/')
+    *p++ = '/';
+  *p = 0;
+
+  return piece;
+}
+
+/* EOF */
diff --git a/vmsjobs.c b/vmsjobs.c
new file mode 100644
index 0000000..b11bca1
--- /dev/null
+++ b/vmsjobs.c
@@ -0,0 +1,928 @@
+/* --------------- Moved here from job.c ---------------
+   This file must be #included in job.c, as it accesses static functions.
+
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <string.h>
+#include <descrip.h>
+#include <clidef.h>
+
+char *vmsify (char *name, int type);
+
+static int vms_jobsefnmask = 0;
+
+/* Wait for nchildren children to terminate */
+static void
+vmsWaitForChildren(int *status)
+{
+  while (1)
+    {
+      if (!vms_jobsefnmask)
+        {
+          *status = 0;
+          return;
+        }
+
+      *status = sys$wflor (32, vms_jobsefnmask);
+    }
+  return;
+}
+
+/* Set up IO redirection.  */
+
+static char *
+vms_redirect (struct dsc$descriptor_s *desc, char *fname, char *ibuf)
+{
+  char *fptr;
+  char saved;
+
+  ibuf++;
+  while (isspace ((unsigned char)*ibuf))
+    ibuf++;
+  fptr = ibuf;
+  while (*ibuf && !isspace ((unsigned char)*ibuf))
+    ibuf++;
+  saved = *ibuf;
+  *ibuf = 0;
+  if (strcmp (fptr, "/dev/null") != 0)
+    {
+      strcpy (fname, vmsify (fptr, 0));
+      if (strchr (fname, '.') == 0)
+        strcat (fname, ".");
+    }
+  desc->dsc$w_length = strlen (fname);
+  desc->dsc$a_pointer = fname;
+  desc->dsc$b_dtype = DSC$K_DTYPE_T;
+  desc->dsc$b_class = DSC$K_CLASS_S;
+
+  if (*fname == 0)
+    printf (_("Warning: Empty redirection\n"));
+  if (saved=='\0')
+    return ibuf;
+  *ibuf = saved;
+  return --ibuf;
+}
+
+
+/* found apostrophe at (p-1)
+   inc p until after closing apostrophe.
+*/
+
+static char *
+vms_handle_apos (char *p)
+{
+  int alast;
+  alast = 0;
+
+  while (*p != 0)
+    if (*p == '"')
+      if (alast)
+        {
+          alast = 0;
+          p++;
+        }
+      else
+        {
+          p++;
+          if (*p!='"')
+            break;
+          alast = 1;
+        }
+    else
+      p++;
+
+  return p;
+}
+
+static int ctrlYPressed= 0;
+/* This is called at main or AST level. It is at AST level for DONTWAITFORCHILD
+   and at main level otherwise. In any case it is called when a child process
+   terminated. At AST level it won't get interrupted by anything except a
+   inner mode level AST.
+*/
+static int
+vmsHandleChildTerm(struct child *child)
+{
+  int exit_code;
+  register struct child *lastc, *c;
+  int child_failed;
+
+  vms_jobsefnmask &= ~(1 << (child->efn - 32));
+
+  lib$free_ef (&child->efn);
+  if (child->comname)
+    {
+      if (!ISDB (DB_JOBS) && !ctrlYPressed)
+        unlink (child->comname);
+      free (child->comname);
+    }
+
+  (void) sigblock (fatal_signal_mask);
+
+  child_failed = !(child->cstatus & 1);
+  if (child_failed)
+    exit_code = child->cstatus;
+
+  /* Search for a child matching the deceased one.  */
+  lastc = 0;
+#if defined(RECURSIVEJOBS) /* I've had problems with recursive stuff and process handling */
+  for (c = children; c != 0 && c != child; lastc = c, c = c->next)
+    ;
+#else
+  c = child;
+#endif
+
+  if (child_failed && !c->noerror && !ignore_errors_flag)
+    {
+      /* The commands failed.  Write an error message,
+         delete non-precious targets, and abort.  */
+      child_error (c, c->cstatus, 0, 0, 0);
+      c->file->update_status = us_failed;
+      delete_child_targets (c);
+    }
+  else
+    {
+      if (child_failed)
+        {
+          /* The commands failed, but we don't care.  */
+          child_error (c, c->cstatus, 0, 0, 1);
+          child_failed = 0;
+        }
+
+#if defined(RECURSIVEJOBS) /* I've had problems with recursive stuff and process handling */
+      /* If there are more commands to run, try to start them.  */
+      start_job (c);
+
+      switch (c->file->command_state)
+        {
+        case cs_running:
+          /* Successfully started.  */
+          break;
+
+        case cs_finished:
+          if (c->file->update_status != us_success)
+            /* We failed to start the commands.  */
+            delete_child_targets (c);
+          break;
+
+        default:
+          OS (error, NILF,
+              _("internal error: '%s' command_state"), c->file->name);
+          abort ();
+          break;
+        }
+#endif /* RECURSIVEJOBS */
+    }
+
+  /* Set the state flag to say the commands have finished.  */
+  c->file->command_state = cs_finished;
+  notice_finished_file (c->file);
+
+#if defined(RECURSIVEJOBS) /* I've had problems with recursive stuff and process handling */
+  /* Remove the child from the chain and free it.  */
+  if (lastc == 0)
+    children = c->next;
+  else
+    lastc->next = c->next;
+  free_child (c);
+#endif /* RECURSIVEJOBS */
+
+  /* There is now another slot open.  */
+  if (job_slots_used > 0)
+    --job_slots_used;
+
+  /* If the job failed, and the -k flag was not given, die.  */
+  if (child_failed && !keep_going_flag)
+    die (exit_code);
+
+  (void) sigsetmask (sigblock (0) & ~(fatal_signal_mask));
+
+  return 1;
+}
+
+/* VMS:
+   Spawn a process executing the command in ARGV and return its pid. */
+
+#define MAXCMDLEN 200
+
+/* local helpers to make ctrl+c and ctrl+y working, see below */
+#include <iodef.h>
+#include <libclidef.h>
+#include <ssdef.h>
+
+static int ctrlMask= LIB$M_CLI_CTRLY;
+static int oldCtrlMask;
+static int setupYAstTried= 0;
+static unsigned short int chan= 0;
+
+static void
+reEnableAst(void)
+{
+  lib$enable_ctrl (&oldCtrlMask,0);
+}
+
+static int
+astYHandler (void)
+{
+  struct child *c;
+  for (c = children; c != 0; c = c->next)
+    sys$delprc (&c->pid, 0, 0);
+  ctrlYPressed= 1;
+  kill (getpid(),SIGQUIT);
+  return SS$_NORMAL;
+}
+
+static void
+tryToSetupYAst(void)
+{
+  $DESCRIPTOR(inputDsc,"SYS$COMMAND");
+  int     status;
+  struct {
+    short int       status, count;
+    int     dvi;
+  } iosb;
+  unsigned short int loc_chan;
+
+  setupYAstTried++;
+
+  if (chan)
+    loc_chan= chan;
+  else
+    {
+      status= sys$assign(&inputDsc,&loc_chan,0,0);
+      if (!(status&SS$_NORMAL))
+        {
+          lib$signal(status);
+          return;
+        }
+    }
+  status= sys$qiow (0, loc_chan, IO$_SETMODE|IO$M_CTRLYAST,&iosb,0,0,
+                    astYHandler,0,0,0,0,0);
+  if (status==SS$_NORMAL)
+    status= iosb.status;
+  if (status!=SS$_NORMAL)
+    {
+      if (!chan)
+        sys$dassgn(loc_chan);
+      if (status!=SS$_ILLIOFUNC && status!=SS$_NOPRIV)
+        lib$signal(status);
+      return;
+    }
+
+  /* called from AST handler ? */
+  if (setupYAstTried>1)
+    return;
+  if (atexit(reEnableAst))
+    fprintf (stderr,
+             _("-warning, you may have to re-enable CTRL-Y handling from DCL.\n"));
+  status= lib$disable_ctrl (&ctrlMask, &oldCtrlMask);
+  if (!(status&SS$_NORMAL))
+    {
+      lib$signal(status);
+      return;
+    }
+  if (!chan)
+    chan = loc_chan;
+}
+
+static int
+nextnl(char *cmd, int l)
+{
+  int instring;
+  instring = 0;
+  while (cmd[l])
+    {
+      if (cmd[l]=='"')
+        instring = !instring;
+      else if (cmd[l]=='\n' && !instring)
+        return ++l;
+      ++l;
+    }
+  return l;
+}
+int
+child_execute_job (char *argv, struct child *child)
+{
+  int i;
+  static struct dsc$descriptor_s cmddsc;
+  static struct dsc$descriptor_s pnamedsc;
+  static struct dsc$descriptor_s ifiledsc;
+  static struct dsc$descriptor_s ofiledsc;
+  static struct dsc$descriptor_s efiledsc;
+  int have_redirection = 0;
+  int have_append = 0;
+  int have_newline = 0;
+
+  int spflags = CLI$M_NOWAIT;
+  int status;
+  char *cmd = alloca (strlen (argv) + 512), *p, *q;
+  char ifile[256], ofile[256], efile[256];
+  int comnamelen;
+  char procname[100];
+  int in_string;
+
+  /* Parse IO redirection.  */
+
+  ifile[0] = 0;
+  ofile[0] = 0;
+  efile[0] = 0;
+  child->comname = NULL;
+
+  DB (DB_JOBS, ("child_execute_job (%s)\n", argv));
+
+  while (isspace ((unsigned char)*argv))
+    argv++;
+
+  if (*argv == 0)
+    return 0;
+
+  sprintf (procname, "GMAKE_%05x", getpid () & 0xfffff);
+  pnamedsc.dsc$w_length = strlen(procname);
+  pnamedsc.dsc$a_pointer = procname;
+  pnamedsc.dsc$b_dtype = DSC$K_DTYPE_T;
+  pnamedsc.dsc$b_class = DSC$K_CLASS_S;
+
+  in_string = 0;
+  /* Handle comments and redirection.
+     For ONESHELL, the redirection must be on the first line. Any other
+     redirection token is handled by DCL, that is, the pipe command with
+     redirection can be used, but it should not be used on the first line
+     for ONESHELL. */
+  for (p = argv, q = cmd; *p; p++, q++)
+    {
+      if (*p == '"')
+        in_string = !in_string;
+      if (in_string)
+        {
+          *q = *p;
+          continue;
+        }
+      switch (*p)
+        {
+        case '#':
+          *p-- = 0;
+          *q-- = 0;
+          break;
+        case '\\':
+          p++;
+          if (*p == '\n')
+            p++;
+          if (isspace ((unsigned char)*p))
+            {
+              do { p++; } while (isspace ((unsigned char)*p));
+              p--;
+            }
+          *q = *p;
+          break;
+        case '<':
+          if (have_newline==0)
+            {
+              p = vms_redirect (&ifiledsc, ifile, p);
+              *q = ' ';
+              have_redirection = 1;
+            }
+          else
+            *q = *p;
+          break;
+        case '>':
+          if (have_newline==0)
+            {
+              have_redirection = 1;
+              if (*(p-1) == '2')
+                {
+                  q--;
+                  if (strncmp (p, ">&1", 3) == 0)
+                    {
+                      p += 2;
+                      strcpy (efile, "sys$output");
+                      efiledsc.dsc$w_length = strlen(efile);
+                      efiledsc.dsc$a_pointer = efile;
+                      efiledsc.dsc$b_dtype = DSC$K_DTYPE_T;
+                      efiledsc.dsc$b_class = DSC$K_CLASS_S;
+                    }
+                  else
+                    p = vms_redirect (&efiledsc, efile, p);
+                }
+              else
+                {
+                  if (*(p+1) == '>')
+                    {
+                      have_append = 1;
+                      p += 1;
+                    }
+                  p = vms_redirect (&ofiledsc, ofile, p);
+                }
+              *q = ' ';
+            }
+          else
+            *q = *p;
+          break;
+        case '\n':
+          have_newline++;
+        default:
+          *q = *p;
+          break;
+        }
+    }
+  *q = *p;
+  while (isspace ((unsigned char)*--q))
+    *q = '\0';
+
+
+#define VMS_EMPTY_ECHO "write sys$output \"\""
+  if (have_newline == 0)
+    {
+      /* multiple shells */
+      if (strncmp(cmd, "builtin_", 8) == 0)
+        {
+          child->pid = 270163;
+          child->efn = 0;
+          child->cstatus = 1;
+
+          DB(DB_JOBS, (_("BUILTIN [%s][%s]\n"), cmd, cmd + 8));
+
+          p = cmd + 8;
+
+          if ((*(p) == 'c') && (*(p + 1) == 'd')
+              && ((*(p + 2) == ' ') || (*(p + 2) == '\t')))
+            {
+              p += 3;
+              while ((*p == ' ') || (*p == '\t'))
+                p++;
+              DB(DB_JOBS, (_("BUILTIN CD %s\n"), p));
+              if (chdir(p))
+                return 0;
+              else
+                return 1;
+            }
+          else if ((*(p) == 'e')
+              && (*(p+1) == 'c')
+              && (*(p+2) == 'h')
+              && (*(p+3) == 'o')
+              && ((*(p+4) == ' ') || (*(p+4) == '\t') || (*(p+4) == '\0')))
+            {
+              /* This is not a real builtin, it is a built in pre-processing
+                 for the VMS/DCL echo (write sys$output) to ensure the to be echoed
+                 string is correctly quoted (with the DCL quote character '"'). */
+              char *vms_echo;
+              p += 4;
+              if (*p == '\0')
+                cmd = VMS_EMPTY_ECHO;
+              else
+                {
+                  p++;
+                  while ((*p == ' ') || (*p == '\t'))
+                    p++;
+                  if (*p == '\0')
+                    cmd = VMS_EMPTY_ECHO;
+                  else
+                    {
+                      vms_echo = alloca(strlen(p) + sizeof VMS_EMPTY_ECHO);
+                      strcpy(vms_echo, VMS_EMPTY_ECHO);
+                      vms_echo[sizeof VMS_EMPTY_ECHO - 2] = '\0';
+                      strcat(vms_echo, p);
+                      strcat(vms_echo, "\"");
+                      cmd = vms_echo;
+                    }
+                }
+              DB (DB_JOBS, (_("BUILTIN ECHO %s->%s\n"), p, cmd));
+            }
+          else
+            {
+              printf(_("Unknown builtin command '%s'\n"), cmd);
+              fflush(stdout);
+              return 0;
+            }
+        }
+      /* expand ':' aka 'do nothing' builtin for bash and friends */
+      else if (cmd[0]==':' && cmd[1]=='\0')
+        {
+          cmd = "continue";
+        }
+    }
+  else
+    {
+      /* todo: expand ':' aka 'do nothing' builtin for bash and friends */
+      /* For 'one shell' expand all the
+           builtin_echo
+         to
+           write sys$output ""
+         where one is  ......7 bytes longer.
+         At the same time ensure that the echo string is properly terminated.
+         For that, allocate a command buffer big enough for all possible expansions
+         (have_newline is the count), then expand, copy and terminate. */
+      char *tmp_cmd;
+      int nloff = 0;
+      int vlen = 0;
+      int clen = 0;
+      int inecho;
+
+      tmp_cmd = alloca(strlen(cmd) + (have_newline + 1) * 7 + 1);
+      tmp_cmd[0] = '\0';
+      inecho = 0;
+      while (cmd[nloff])
+        {
+          if (inecho)
+            {
+              if (clen < nloff - 1)
+                {
+                  memcpy(&tmp_cmd[vlen], &cmd[clen], nloff - clen - 1);
+                  vlen += nloff - clen - 1;
+                  clen = nloff;
+                }
+              inecho = 0;
+              tmp_cmd[vlen] = '"';
+              vlen++;
+              tmp_cmd[vlen] = '\n';
+              vlen++;
+            }
+          if (strncmp(&cmd[nloff], "builtin_", 8) == 0)
+            {
+              /* ??? */
+              child->pid = 270163;
+              child->efn = 0;
+              child->cstatus = 1;
+
+              DB (DB_JOBS, (_("BUILTIN [%s][%s]\n"), &cmd[nloff], &cmd[nloff+8]));
+              p = &cmd[nloff + 8];
+              if ((*(p) ==        'e')
+                  && (*(p + 1) == 'c')
+                  && (*(p + 2) == 'h')
+                  && (*(p + 3) == 'o')
+                  && ((*(p + 4) == ' ') || (*(p + 4) == '\t') || (*(p + 4) == '\0')))
+                {
+                  if (clen < nloff - 1)
+                    {
+                      memcpy(&tmp_cmd[vlen], &cmd[clen], nloff - clen - 1);
+                      vlen += nloff - clen - 1;
+                      clen = nloff;
+                      if (inecho)
+                        {
+                          inecho = 0;
+                          tmp_cmd[vlen] = '"';
+                          vlen++;
+                        }
+                      tmp_cmd[vlen] = '\n';
+                      vlen++;
+                    }
+                  inecho = 1;
+                  p += 4;
+                  while ((*p == ' ') || (*p == '\t'))
+                    p++;
+                  clen = p - cmd;
+                  memcpy(&tmp_cmd[vlen], VMS_EMPTY_ECHO,
+                      sizeof VMS_EMPTY_ECHO - 2);
+                  vlen += sizeof VMS_EMPTY_ECHO - 2;
+                }
+              else
+                {
+                  printf (_("Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"), &cmd[nloff]);
+                  fflush(stdout);
+                  return 0;
+                }
+            }
+          nloff = nextnl(cmd, nloff + 1);
+        }
+      if (clen < nloff)
+        {
+          memcpy(&tmp_cmd[vlen], &cmd[clen], nloff - clen);
+          vlen += nloff - clen;
+          clen = nloff;
+          if (inecho)
+            {
+              inecho = 0;
+              tmp_cmd[vlen] = '"';
+              vlen++;
+            }
+        }
+
+      tmp_cmd[vlen] = '\0';
+
+      cmd = tmp_cmd;
+    }
+
+#ifdef USE_DCL_COM_FILE
+  /* Enforce the creation of a command file.
+     Then all the make environment variables are written as DCL symbol
+     assignments into the command file as well, so that they are visible
+     in the sub-process but do not affect the current process.
+     Further, this way DCL reads the input stream and therefore does
+     'forced' symbol substitution, which it doesn't do for one-liners when
+     they are 'lib$spawn'ed. */
+#else
+  /* Create a *.com file if either the command is too long for
+     lib$spawn, or the command contains a newline, or if redirection
+     is desired. Forcing commands with newlines into DCLs allows to
+     store search lists on user mode logicals.  */
+  if (strlen (cmd) > MAXCMDLEN
+      || (have_redirection != 0)
+      || (have_newline != 0))
+#endif
+    {
+      FILE *outfile;
+      char c;
+      char *sep;
+      int alevel = 0;   /* apostrophe level */
+      int tmpstrlen;
+      char *tmpstr;
+      if (strlen (cmd) == 0)
+        {
+          printf (_("Error, empty command\n"));
+          fflush (stdout);
+          return 0;
+        }
+
+      outfile = output_tmpfile (&child->comname, "sys$scratch:CMDXXXXXX.COM");
+      /*                                          012345678901234567890 */
+#define TMP_OFFSET 12
+#define TMP_LEN 9
+      if (outfile == 0)
+        pfatal_with_name (_("fopen (temporary file)"));
+      comnamelen = strlen (child->comname);
+      tmpstr = &child->comname[TMP_OFFSET];
+      tmpstrlen = TMP_LEN;
+      /* The whole DCL "script" is executed as one action, and it behaves as
+         any DCL "script", that is errors stop it but warnings do not. Usually
+         the command on the last line, defines the exit code.  However, with
+         redirections there is a prolog and possibly an epilog to implement
+         the redirection.  Both are part of the script which is actually
+         executed. So if the redirection encounters an error in the prolog,
+         the user actions will not run; if in the epilog, the user actions
+         ran, but output is not captured. In both error cases, the error of
+         redirection is passed back and not the exit code of the actions. The
+         user should be able to enable DCL "script" verification with "set
+         verify". However, the prolog and epilog commands are not shown. Also,
+         if output redirection is used, the verification output is redirected
+         into that file as well. */
+      fprintf (outfile, "$ %.*s_1 = \"''f$verify(0)'\"\n", tmpstrlen, tmpstr);
+      if (ifile[0])
+        {
+          fprintf (outfile, "$ assign/user %s sys$input\n", ifile);
+          DB (DB_JOBS, (_("Redirected input from %s\n"), ifile));
+          ifiledsc.dsc$w_length = 0;
+        }
+
+      if (efile[0])
+        {
+          fprintf (outfile, "$ define sys$error %s\n", efile);
+          DB (DB_JOBS, (_("Redirected error to %s\n"), efile));
+          efiledsc.dsc$w_length = 0;
+        }
+
+      if (ofile[0])
+        if (have_append)
+          {
+            fprintf (outfile, "$ define sys$output %.*s\n", comnamelen-3, child->comname);
+            fprintf (outfile, "$ on error then $ goto %.*s\n", tmpstrlen, tmpstr);
+            DB (DB_JOBS, (_("Append output to %s\n"), ofile));
+            ofiledsc.dsc$w_length = 0;
+          }
+        else
+          {
+            fprintf (outfile, "$ define sys$output %s\n", ofile);
+            DB (DB_JOBS, (_("Redirected output to %s\n"), ofile));
+            ofiledsc.dsc$w_length = 0;
+          }
+#ifdef USE_DCL_COM_FILE
+      /* Export the child environment into DCL symbols */
+      if (child->environment != 0)
+        {
+          char **ep = child->environment;
+          char *valstr;
+          while (*ep != 0)
+            {
+              valstr = strchr(*ep, '=');
+              if (valstr == NULL)
+                continue;
+              fprintf(outfile, "$ %.*s=\"%s\"\n", valstr - *ep, *ep,
+                  valstr + 1);
+              ep++;
+            }
+        }
+#endif
+      fprintf (outfile, "$ %.*s_ = f$verify(%.*s_1)\n", tmpstrlen, tmpstr, tmpstrlen, tmpstr);
+
+      /* TODO: give 78 a name! Whether 78 is a good number is another question.
+         Trim, split and write the command lines.
+         Splitting of a command is done after 78 output characters at an
+         appropriate place (after strings, after comma or space and
+         before slash): appending a hyphen indicates that the DCL command
+         is being continued.
+         Trimming is to skip any whitespace around - including - a
+         leading $ from the command to ensure writing exactly one "$ "
+         at the beginning of the line of the output file. Trimming is
+         done when a new command is seen, indicated by a '\n' (outside
+         of a string).
+         The buffer so far is written and reset, when a new command is
+         seen, when a split was done and at the end of the command.
+         Only for ONESHELL there will be several commands separated by
+         '\n'. But there can always be multiple continuation lines. */
+      p = sep = q = cmd;
+      for (c = '\n'; c; c = *q++)
+        {
+          switch (c)
+          {
+          case '\n':
+            if (q > p)
+              {
+                fwrite(p, 1, q - p, outfile);
+                p = q;
+              }
+            fputc('$', outfile);
+            fputc(' ', outfile);
+            while (isspace((unsigned char) *p))
+              p++;
+            if (*p == '$')
+              p++;
+            while (isspace((unsigned char) *p))
+              p++;
+            q = sep = p;
+            break;
+          case '"':
+            q = vms_handle_apos(q);
+            sep = q;
+            break;
+          case ',':
+          case ' ':
+            sep = q;
+            break;
+          case '/':
+          case '\0':
+            sep = q - 1;
+            break;
+          default:
+            break;
+          }
+          if (sep - p > 78)
+            {
+              /* Enough stuff for a line. */
+              fwrite(p, 1, sep - p, outfile);
+              p = sep;
+              if (*sep)
+                {
+                  /* The command continues.  */
+                  fputc('-', outfile);
+                }
+              fputc('\n', outfile);
+            }
+        }
+
+      if (*p)
+        {
+          fwrite(p, 1, --q - p, outfile);
+          fputc('\n', outfile);
+        }
+
+      if (have_append)
+        {
+          fprintf (outfile, "$ %.*s: ! 'f$verify(0)\n", tmpstrlen, tmpstr);
+          fprintf (outfile, "$ %.*s_2 = $status\n", tmpstrlen, tmpstr);
+          fprintf (outfile, "$ on error then $ exit\n");
+          fprintf (outfile, "$ deassign sys$output\n");
+          if (efile[0])
+            fprintf (outfile, "$ deassign sys$error\n");
+          fprintf (outfile, "$ append:=append\n");
+          fprintf (outfile, "$ delete:=delete\n");
+          fprintf (outfile, "$ append/new %.*s %s\n", comnamelen-3, child->comname, ofile);
+          fprintf (outfile, "$ delete %.*s;*\n", comnamelen-3, child->comname);
+          fprintf (outfile, "$ exit '%.*s_2 + (0*f$verify(%.*s_1))\n", tmpstrlen, tmpstr, tmpstrlen, tmpstr);
+          DB (DB_JOBS, (_("Append %.*s and cleanup\n"), comnamelen-3, child->comname));
+        }
+
+      fclose (outfile);
+
+      sprintf (cmd, "$ @%s", child->comname);
+
+      DB (DB_JOBS, (_("Executing %s instead\n"), cmd));
+    }
+
+  cmddsc.dsc$w_length = strlen(cmd);
+  cmddsc.dsc$a_pointer = cmd;
+  cmddsc.dsc$b_dtype = DSC$K_DTYPE_T;
+  cmddsc.dsc$b_class = DSC$K_CLASS_S;
+
+  child->efn = 0;
+  while (child->efn < 32 || child->efn > 63)
+    {
+      status = lib$get_ef ((unsigned long *)&child->efn);
+      if (!(status & 1))
+        {
+          if (child->comname)
+            {
+              if (!ISDB (DB_JOBS))
+                unlink (child->comname);
+              free (child->comname);
+            }
+          return 0;
+        }
+    }
+
+  sys$clref (child->efn);
+
+  vms_jobsefnmask |= (1 << (child->efn - 32));
+
+  /*
+    LIB$SPAWN  [command-string]
+    [,input-file]
+    [,output-file]
+    [,flags]
+    [,process-name]
+    [,process-id] [,completion-status-address] [,byte-integer-event-flag-num]
+    [,AST-address] [,varying-AST-argument]
+    [,prompt-string] [,cli] [,table]
+  */
+
+#ifndef DONTWAITFORCHILD
+  /*
+   * Code to make ctrl+c and ctrl+y working.
+   * The problem starts with the synchronous case where after lib$spawn is
+   * called any input will go to the child. But with input re-directed,
+   * both control characters won't make it to any of the programs, neither
+   * the spawning nor to the spawned one. Hence the caller needs to spawn
+   * with CLI$M_NOWAIT to NOT give up the input focus. A sys$waitfr
+   * has to follow to simulate the wanted synchronous behaviour.
+   * The next problem is ctrl+y which isn't caught by the crtl and
+   * therefore isn't converted to SIGQUIT (for a signal handler which is
+   * already established). The only way to catch ctrl+y, is an AST
+   * assigned to the input channel. But ctrl+y handling of DCL needs to be
+   * disabled, otherwise it will handle it. Not to mention the previous
+   * ctrl+y handling of DCL needs to be re-established before make exits.
+   * One more: At the time of LIB$SPAWN signals are blocked. SIGQUIT will
+   * make it to the signal handler after the child "normally" terminates.
+   * This isn't enough. It seems reasonable for simple command lines like
+   * a 'cc foobar.c' spawned in a subprocess but it is unacceptable for
+   * spawning make. Therefore we need to abort the process in the AST.
+   *
+   * Prior to the spawn it is checked if an AST is already set up for
+   * ctrl+y, if not one is set up for a channel to SYS$COMMAND. In general
+   * this will work except if make is run in a batch environment, but there
+   * nobody can press ctrl+y. During the setup the DCL handling of ctrl+y
+   * is disabled and an exit handler is established to re-enable it.
+   * If the user interrupts with ctrl+y, the assigned AST will fire, force
+   * an abort to the subprocess and signal SIGQUIT, which will be caught by
+   * the already established handler and will bring us back to common code.
+   * After the spawn (now /nowait) a sys$waitfr simulates the /wait and
+   * enables the ctrl+y be delivered to this code. And the ctrl+c too,
+   * which the crtl converts to SIGINT and which is caught by the common
+   * signal handler. Because signals were blocked before entering this code
+   * sys$waitfr will always complete and the SIGQUIT will be processed after
+   * it (after termination of the current block, somewhere in common code).
+   * And SIGINT too will be delayed. That is ctrl+c can only abort when the
+   * current command completes. Anyway it's better than nothing :-)
+   */
+
+  if (!setupYAstTried)
+    tryToSetupYAst();
+  status = lib$spawn (&cmddsc,                                  /* cmd-string */
+                      (ifiledsc.dsc$w_length == 0)?0:&ifiledsc, /* input-file */
+                      (ofiledsc.dsc$w_length == 0)?0:&ofiledsc, /* output-file */
+                      &spflags,                                 /* flags */
+                      &pnamedsc,                                /* proc name */
+                      &child->pid, &child->cstatus, &child->efn,
+                      0, 0,
+                      0, 0, 0);
+  if (status & 1)
+    {
+      status= sys$waitfr (child->efn);
+      vmsHandleChildTerm(child);
+    }
+#else
+  status = lib$spawn (&cmddsc,
+                      (ifiledsc.dsc$w_length == 0)?0:&ifiledsc,
+                      (ofiledsc.dsc$w_length == 0)?0:&ofiledsc,
+                      &spflags,
+                      &pnamedsc,
+                      &child->pid, &child->cstatus, &child->efn,
+                      vmsHandleChildTerm, child,
+                      0, 0, 0);
+#endif
+
+  if (!(status & 1))
+    {
+      printf (_("Error spawning, %d\n") ,status);
+      fflush (stdout);
+      switch (status)
+        {
+        case 0x1c:
+          errno = EPROCLIM;
+          break;
+        default:
+          errno = EFAIL;
+        }
+    }
+
+  return (status & 1);
+}
diff --git a/vpath.c b/vpath.c
new file mode 100644
index 0000000..1bcba04
--- /dev/null
+++ b/vpath.c
@@ -0,0 +1,617 @@
+/* Implementation of pattern-matching file search paths for GNU Make.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "filedef.h"
+#include "variable.h"
+#ifdef WINDOWS32
+#include "pathstuff.h"
+#endif
+
+
+/* Structure used to represent a selective VPATH searchpath.  */
+
+struct vpath
+  {
+    struct vpath *next; /* Pointer to next struct in the linked list.  */
+    const char *pattern;/* The pattern to match.  */
+    const char *percent;/* Pointer into 'pattern' where the '%' is.  */
+    unsigned int patlen;/* Length of the pattern.  */
+    const char **searchpath; /* Null-terminated list of directories.  */
+    unsigned int maxlen;/* Maximum length of any entry in the list.  */
+  };
+
+/* Linked-list of all selective VPATHs.  */
+
+static struct vpath *vpaths;
+
+/* Structure for the general VPATH given in the variable.  */
+
+static struct vpath *general_vpath;
+
+/* Structure for GPATH given in the variable.  */
+
+static struct vpath *gpaths;
+
+
+/* Reverse the chain of selective VPATH lists so they will be searched in the
+   order given in the makefiles and construct the list from the VPATH
+   variable.  */
+
+void
+build_vpath_lists ()
+{
+  register struct vpath *new = 0;
+  register struct vpath *old, *nexto;
+  register char *p;
+
+  /* Reverse the chain.  */
+  for (old = vpaths; old != 0; old = nexto)
+    {
+      nexto = old->next;
+      old->next = new;
+      new = old;
+    }
+
+  vpaths = new;
+
+  /* If there is a VPATH variable with a nonnull value, construct the
+     general VPATH list from it.  We use variable_expand rather than just
+     calling lookup_variable so that it will be recursively expanded.  */
+
+  {
+    /* Turn off --warn-undefined-variables while we expand SHELL and IFS.  */
+    int save = warn_undefined_variables_flag;
+    warn_undefined_variables_flag = 0;
+
+    p = variable_expand ("$(strip $(VPATH))");
+
+    warn_undefined_variables_flag = save;
+  }
+
+  if (*p != '\0')
+    {
+      /* Save the list of vpaths.  */
+      struct vpath *save_vpaths = vpaths;
+      char gp[] = "%";
+
+      /* Empty 'vpaths' so the new one will have no next, and 'vpaths'
+         will still be nil if P contains no existing directories.  */
+      vpaths = 0;
+
+      /* Parse P.  */
+      construct_vpath_list (gp, p);
+
+      /* Store the created path as the general path,
+         and restore the old list of vpaths.  */
+      general_vpath = vpaths;
+      vpaths = save_vpaths;
+    }
+
+  /* If there is a GPATH variable with a nonnull value, construct the
+     GPATH list from it.  We use variable_expand rather than just
+     calling lookup_variable so that it will be recursively expanded.  */
+
+  {
+    /* Turn off --warn-undefined-variables while we expand SHELL and IFS.  */
+    int save = warn_undefined_variables_flag;
+    warn_undefined_variables_flag = 0;
+
+    p = variable_expand ("$(strip $(GPATH))");
+
+    warn_undefined_variables_flag = save;
+  }
+
+  if (*p != '\0')
+    {
+      /* Save the list of vpaths.  */
+      struct vpath *save_vpaths = vpaths;
+      char gp[] = "%";
+
+      /* Empty 'vpaths' so the new one will have no next, and 'vpaths'
+         will still be nil if P contains no existing directories.  */
+      vpaths = 0;
+
+      /* Parse P.  */
+      construct_vpath_list (gp, p);
+
+      /* Store the created path as the GPATH,
+         and restore the old list of vpaths.  */
+      gpaths = vpaths;
+      vpaths = save_vpaths;
+    }
+}
+
+/* Construct the VPATH listing for the PATTERN and DIRPATH given.
+
+   This function is called to generate selective VPATH lists and also for
+   the general VPATH list (which is in fact just a selective VPATH that
+   is applied to everything).  The returned pointer is either put in the
+   linked list of all selective VPATH lists or in the GENERAL_VPATH
+   variable.
+
+   If DIRPATH is nil, remove all previous listings with the same
+   pattern.  If PATTERN is nil, remove all VPATH listings.  Existing
+   and readable directories that are not "." given in the DIRPATH
+   separated by the path element separator (defined in makeint.h) are
+   loaded into the directory hash table if they are not there already
+   and put in the VPATH searchpath for the given pattern with trailing
+   slashes stripped off if present (and if the directory is not the
+   root, "/").  The length of the longest entry in the list is put in
+   the structure as well.  The new entry will be at the head of the
+   VPATHS chain.  */
+
+void
+construct_vpath_list (char *pattern, char *dirpath)
+{
+  unsigned int elem;
+  char *p;
+  const char **vpath;
+  unsigned int maxvpath;
+  unsigned int maxelem;
+  const char *percent = NULL;
+
+  if (pattern != 0)
+    percent = find_percent (pattern);
+
+  if (dirpath == 0)
+    {
+      /* Remove matching listings.  */
+      struct vpath *path, *lastpath;
+
+      lastpath = 0;
+      path = vpaths;
+      while (path != 0)
+        {
+          struct vpath *next = path->next;
+
+          if (pattern == 0
+              || (((percent == 0 && path->percent == 0)
+                   || (percent - pattern == path->percent - path->pattern))
+                  && streq (pattern, path->pattern)))
+            {
+              /* Remove it from the linked list.  */
+              if (lastpath == 0)
+                vpaths = path->next;
+              else
+                lastpath->next = next;
+
+              /* Free its unused storage.  */
+              /* MSVC erroneously warns without a cast here.  */
+              free ((void *)path->searchpath);
+              free (path);
+            }
+          else
+            lastpath = path;
+
+          path = next;
+        }
+
+      return;
+    }
+
+#ifdef WINDOWS32
+    convert_vpath_to_windows32 (dirpath, ';');
+#endif
+
+  /* Skip over any initial separators and blanks.  */
+  while (*dirpath == PATH_SEPARATOR_CHAR || isblank ((unsigned char)*dirpath))
+    ++dirpath;
+
+  /* Figure out the maximum number of VPATH entries and put it in
+     MAXELEM.  We start with 2, one before the first separator and one
+     nil (the list terminator) and increment our estimated number for
+     each separator or blank we find.  */
+  maxelem = 2;
+  p = dirpath;
+  while (*p != '\0')
+    if (*p++ == PATH_SEPARATOR_CHAR || isblank ((unsigned char)*p))
+      ++maxelem;
+
+  vpath = xmalloc (maxelem * sizeof (const char *));
+  maxvpath = 0;
+
+  elem = 0;
+  p = dirpath;
+  while (*p != '\0')
+    {
+      char *v;
+      unsigned int len;
+
+      /* Find the end of this entry.  */
+      v = p;
+      while (*p != '\0'
+#if defined(HAVE_DOS_PATHS) && (PATH_SEPARATOR_CHAR == ':')
+             /* Platforms whose PATH_SEPARATOR_CHAR is ':' and which
+                also define HAVE_DOS_PATHS would like us to recognize
+                colons after the drive letter in the likes of
+                "D:/foo/bar:C:/xyzzy".  */
+             && (*p != PATH_SEPARATOR_CHAR
+                 || (p == v + 1 && (p[1] == '/' || p[1] == '\\')))
+#else
+             && *p != PATH_SEPARATOR_CHAR
+#endif
+             && !isblank ((unsigned char)*p))
+        ++p;
+
+      len = p - v;
+      /* Make sure there's no trailing slash,
+         but still allow "/" as a directory.  */
+#if defined(__MSDOS__) || defined(__EMX__) || defined(HAVE_DOS_PATHS)
+      /* We need also to leave alone a trailing slash in "d:/".  */
+      if (len > 3 || (len > 1 && v[1] != ':'))
+#endif
+      if (len > 1 && p[-1] == '/')
+        --len;
+
+      /* Put the directory on the vpath list.  */
+      if (len > 1 || *v != '.')
+        {
+          vpath[elem++] = dir_name (strcache_add_len (v, len));
+          if (len > maxvpath)
+            maxvpath = len;
+        }
+
+      /* Skip over separators and blanks between entries.  */
+      while (*p == PATH_SEPARATOR_CHAR || isblank ((unsigned char)*p))
+        ++p;
+    }
+
+  if (elem > 0)
+    {
+      struct vpath *path;
+      /* ELEM is now incremented one element past the last
+         entry, to where the nil-pointer terminator goes.
+         Usually this is maxelem - 1.  If not, shrink down.  */
+      if (elem < (maxelem - 1))
+        vpath = xrealloc (vpath, (elem+1) * sizeof (const char *));
+
+      /* Put the nil-pointer terminator on the end of the VPATH list.  */
+      vpath[elem] = NULL;
+
+      /* Construct the vpath structure and put it into the linked list.  */
+      path = xmalloc (sizeof (struct vpath));
+      path->searchpath = vpath;
+      path->maxlen = maxvpath;
+      path->next = vpaths;
+      vpaths = path;
+
+      /* Set up the members.  */
+      path->pattern = strcache_add (pattern);
+      path->patlen = strlen (pattern);
+      path->percent = percent ? path->pattern + (percent - pattern) : 0;
+    }
+  else
+    /* There were no entries, so free whatever space we allocated.  */
+    /* MSVC erroneously warns without a cast here.  */
+    free ((void *)vpath);
+}
+
+/* Search the GPATH list for a pathname string that matches the one passed
+   in.  If it is found, return 1.  Otherwise we return 0.  */
+
+int
+gpath_search (const char *file, unsigned int len)
+{
+  if (gpaths && (len <= gpaths->maxlen))
+    {
+      const char **gp;
+      for (gp = gpaths->searchpath; *gp != NULL; ++gp)
+        if (strneq (*gp, file, len) && (*gp)[len] == '\0')
+          return 1;
+    }
+
+  return 0;
+}
+
+
+/* Search the given VPATH list for a directory where the name pointed to by
+   FILE exists.  If it is found, we return a cached name of the existing file
+   and set *MTIME_PTR (if MTIME_PTR is not NULL) to its modtime (or zero if no
+   stat call was done). Also set the matching directory index in PATH_INDEX
+   if it is not NULL. Otherwise we return NULL.  */
+
+static const char *
+selective_vpath_search (struct vpath *path, const char *file,
+                        FILE_TIMESTAMP *mtime_ptr, unsigned int* path_index)
+{
+  int not_target;
+  char *name;
+  const char *n;
+  const char *filename;
+  const char **vpath = path->searchpath;
+  unsigned int maxvpath = path->maxlen;
+  unsigned int i;
+  unsigned int flen, name_dplen;
+  int exists = 0;
+
+  /* Find out if *FILE is a target.
+     If and only if it is NOT a target, we will accept prospective
+     files that don't exist but are mentioned in a makefile.  */
+  {
+    struct file *f = lookup_file (file);
+    not_target = f == 0 || !f->is_target;
+  }
+
+  flen = strlen (file);
+
+  /* Split *FILE into a directory prefix and a name-within-directory.
+     NAME_DPLEN gets the length of the prefix; FILENAME gets the pointer to
+     the name-within-directory and FLEN is its length.  */
+
+  n = strrchr (file, '/');
+#ifdef HAVE_DOS_PATHS
+  /* We need the rightmost slash or backslash.  */
+  {
+    const char *bslash = strrchr (file, '\\');
+    if (!n || bslash > n)
+      n = bslash;
+  }
+#endif
+  name_dplen = n != 0 ? n - file : 0;
+  filename = name_dplen > 0 ? n + 1 : file;
+  if (name_dplen > 0)
+    flen -= name_dplen + 1;
+
+  /* Get enough space for the biggest VPATH entry, a slash, the directory
+     prefix that came with FILE, another slash (although this one may not
+     always be necessary), the filename, and a null terminator.  */
+  name = alloca (maxvpath + 1 + name_dplen + 1 + flen + 1);
+
+  /* Try each VPATH entry.  */
+  for (i = 0; vpath[i] != 0; ++i)
+    {
+      int exists_in_cache = 0;
+      char *p = name;
+      unsigned int vlen = strlen (vpath[i]);
+
+      /* Put the next VPATH entry into NAME at P and increment P past it.  */
+      memcpy (p, vpath[i], vlen);
+      p += vlen;
+
+      /* Add the directory prefix already in *FILE.  */
+      if (name_dplen > 0)
+        {
+#ifndef VMS
+          *p++ = '/';
+#endif
+          memcpy (p, file, name_dplen);
+          p += name_dplen;
+        }
+
+#ifdef HAVE_DOS_PATHS
+      /* Cause the next if to treat backslash and slash alike.  */
+      if (p != name && p[-1] == '\\' )
+        p[-1] = '/';
+#endif
+      /* Now add the name-within-directory at the end of NAME.  */
+#ifndef VMS
+      if (p != name && p[-1] != '/')
+        {
+          *p = '/';
+          memcpy (p + 1, filename, flen + 1);
+        }
+      else
+#endif
+        memcpy (p, filename, flen + 1);
+
+      /* Check if the file is mentioned in a makefile.  If *FILE is not
+         a target, that is enough for us to decide this file exists.
+         If *FILE is a target, then the file must be mentioned in the
+         makefile also as a target to be chosen.
+
+         The restriction that *FILE must not be a target for a
+         makefile-mentioned file to be chosen was added by an
+         inadequately commented change in July 1990; I am not sure off
+         hand what problem it fixes.
+
+         In December 1993 I loosened this restriction to allow a file
+         to be chosen if it is mentioned as a target in a makefile.  This
+         seem logical.
+
+         Special handling for -W / -o: make sure we preserve the special
+         values here.  Actually this whole thing is a little bogus: I think
+         we should ditch the name/hname thing and look into the renamed
+         capability that already exists for files: that is, have a new struct
+         file* entry for the VPATH-found file, and set the renamed field if
+         we use it.
+      */
+      {
+        struct file *f = lookup_file (name);
+        if (f != 0)
+          {
+            exists = not_target || f->is_target;
+            if (exists && mtime_ptr
+                && (f->last_mtime == OLD_MTIME || f->last_mtime == NEW_MTIME))
+              {
+                *mtime_ptr = f->last_mtime;
+                mtime_ptr = 0;
+              }
+          }
+      }
+
+      if (!exists)
+        {
+          /* That file wasn't mentioned in the makefile.
+             See if it actually exists.  */
+
+#ifdef VMS
+          exists_in_cache = exists = dir_file_exists_p (vpath[i], filename);
+#else
+          /* Clobber a null into the name at the last slash.
+             Now NAME is the name of the directory to look in.  */
+          *p = '\0';
+
+          /* We know the directory is in the hash table now because either
+             construct_vpath_list or the code just above put it there.
+             Does the file we seek exist in it?  */
+          exists_in_cache = exists = dir_file_exists_p (name, filename);
+#endif
+        }
+
+      if (exists)
+        {
+          /* The file is in the directory cache.
+             Now check that it actually exists in the filesystem.
+             The cache may be out of date.  When vpath thinks a file
+             exists, but stat fails for it, confusion results in the
+             higher levels.  */
+
+          struct stat st;
+
+#ifndef VMS
+          /* Put the slash back in NAME.  */
+          *p = '/';
+#endif
+
+          if (exists_in_cache)  /* Makefile-mentioned file need not exist.  */
+            {
+              int e;
+
+              EINTRLOOP (e, stat (name, &st)); /* Does it really exist?  */
+              if (e != 0)
+                {
+                  exists = 0;
+                  continue;
+                }
+
+              /* Store the modtime into *MTIME_PTR for the caller.  */
+              if (mtime_ptr != 0)
+                {
+                  *mtime_ptr = FILE_TIMESTAMP_STAT_MODTIME (name, st);
+                  mtime_ptr = 0;
+                }
+            }
+
+          /* We have found a file.
+             If we get here and mtime_ptr hasn't been set, record
+             UNKNOWN_MTIME to indicate this.  */
+          if (mtime_ptr != 0)
+            *mtime_ptr = UNKNOWN_MTIME;
+
+          /* Store the name we found and return it.  */
+
+          if (path_index)
+            *path_index = i;
+
+          return strcache_add_len (name, (p + 1 - name) + flen);
+        }
+    }
+
+  return 0;
+}
+
+
+/* Search the VPATH list whose pattern matches FILE for a directory where FILE
+   exists.  If it is found, return the cached name of an existing file, and
+   set *MTIME_PTR (if MTIME_PTR is not NULL) to its modtime (or zero if no
+   stat call was done). Also set the matching directory index in VPATH_INDEX
+   and PATH_INDEX if they are not NULL.  Otherwise we return 0.  */
+
+const char *
+vpath_search (const char *file, FILE_TIMESTAMP *mtime_ptr,
+              unsigned int* vpath_index, unsigned int* path_index)
+{
+  struct vpath *v;
+
+  /* If there are no VPATH entries or FILENAME starts at the root,
+     there is nothing we can do.  */
+
+  if (file[0] == '/'
+#ifdef HAVE_DOS_PATHS
+      || file[0] == '\\' || file[1] == ':'
+#endif
+      || (vpaths == 0 && general_vpath == 0))
+    return 0;
+
+  if (vpath_index)
+    {
+      *vpath_index = 0;
+      *path_index = 0;
+    }
+
+  for (v = vpaths; v != 0; v = v->next)
+    {
+      if (pattern_matches (v->pattern, v->percent, file))
+        {
+          const char *p = selective_vpath_search (
+            v, file, mtime_ptr, path_index);
+          if (p)
+            return p;
+        }
+
+      if (vpath_index)
+        ++*vpath_index;
+    }
+
+
+  if (general_vpath != 0)
+    {
+      const char *p = selective_vpath_search (
+        general_vpath, file, mtime_ptr, path_index);
+      if (p)
+        return p;
+    }
+
+  return 0;
+}
+
+
+
+
+/* Print the data base of VPATH search paths.  */
+
+void
+print_vpath_data_base (void)
+{
+  unsigned int nvpaths;
+  struct vpath *v;
+
+  puts (_("\n# VPATH Search Paths\n"));
+
+  nvpaths = 0;
+  for (v = vpaths; v != 0; v = v->next)
+    {
+      register unsigned int i;
+
+      ++nvpaths;
+
+      printf ("vpath %s ", v->pattern);
+
+      for (i = 0; v->searchpath[i] != 0; ++i)
+        printf ("%s%c", v->searchpath[i],
+                v->searchpath[i + 1] == 0 ? '\n' : PATH_SEPARATOR_CHAR);
+    }
+
+  if (vpaths == 0)
+    puts (_("# No 'vpath' search paths."));
+  else
+    printf (_("\n# %u 'vpath' search paths.\n"), nvpaths);
+
+  if (general_vpath == 0)
+    puts (_("\n# No general ('VPATH' variable) search path."));
+  else
+    {
+      const char **path = general_vpath->searchpath;
+      unsigned int i;
+
+      fputs (_("\n# General ('VPATH' variable) search path:\n# "), stdout);
+
+      for (i = 0; path[i] != 0; ++i)
+        printf ("%s%c", path[i],
+                path[i + 1] == 0 ? '\n' : PATH_SEPARATOR_CHAR);
+    }
+}
diff --git a/w32/Makefile.am b/w32/Makefile.am
new file mode 100644
index 0000000..a2c4063
--- /dev/null
+++ b/w32/Makefile.am
@@ -0,0 +1,25 @@
+# Makefile.am to create libw32.a for mingw32 host.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AUTOMAKE_OPTIONS = subdir-objects
+
+noinst_LIBRARIES = libw32.a
+
+libw32_a_SOURCES =  subproc/misc.c subproc/sub_proc.c subproc/w32err.c \
+		    compat/posixfcn.c pathstuff.c
+
+libw32_a_CPPFLAGS = -I$(srcdir)/include -I$(srcdir)/subproc -I$(top_srcdir)
diff --git a/w32/Makefile.in b/w32/Makefile.in
new file mode 100644
index 0000000..4760541
--- /dev/null
+++ b/w32/Makefile.in
@@ -0,0 +1,696 @@
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am to create libw32.a for mingw32 host.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = w32
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libw32_a_AR = $(AR) $(ARFLAGS)
+libw32_a_LIBADD =
+am__dirstamp = $(am__leading_dot)dirstamp
+am_libw32_a_OBJECTS = subproc/libw32_a-misc.$(OBJEXT) \
+	subproc/libw32_a-sub_proc.$(OBJEXT) \
+	subproc/libw32_a-w32err.$(OBJEXT) \
+	compat/libw32_a-posixfcn.$(OBJEXT) \
+	libw32_a-pathstuff.$(OBJEXT)
+libw32_a_OBJECTS = $(am_libw32_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libw32_a_SOURCES)
+DIST_SOURCES = $(libw32_a_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = subdir-objects
+noinst_LIBRARIES = libw32.a
+libw32_a_SOURCES = subproc/misc.c subproc/sub_proc.c subproc/w32err.c \
+		    compat/posixfcn.c pathstuff.c
+
+libw32_a_CPPFLAGS = -I$(srcdir)/include -I$(srcdir)/subproc -I$(top_srcdir)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign w32/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign w32/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+subproc/$(am__dirstamp):
+	@$(MKDIR_P) subproc
+	@: > subproc/$(am__dirstamp)
+subproc/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) subproc/$(DEPDIR)
+	@: > subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-misc.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-sub_proc.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-w32err.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+compat/$(am__dirstamp):
+	@$(MKDIR_P) compat
+	@: > compat/$(am__dirstamp)
+compat/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) compat/$(DEPDIR)
+	@: > compat/$(DEPDIR)/$(am__dirstamp)
+compat/libw32_a-posixfcn.$(OBJEXT): compat/$(am__dirstamp) \
+	compat/$(DEPDIR)/$(am__dirstamp)
+
+libw32.a: $(libw32_a_OBJECTS) $(libw32_a_DEPENDENCIES) $(EXTRA_libw32_a_DEPENDENCIES) 
+	$(AM_V_at)-rm -f libw32.a
+	$(AM_V_AR)$(libw32_a_AR) libw32.a $(libw32_a_OBJECTS) $(libw32_a_LIBADD)
+	$(AM_V_at)$(RANLIB) libw32.a
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+	-rm -f compat/*.$(OBJEXT)
+	-rm -f subproc/*.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libw32_a-pathstuff.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@compat/$(DEPDIR)/libw32_a-posixfcn.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-sub_proc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-w32err.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+subproc/libw32_a-misc.o: subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-misc.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-misc.Tpo -c -o subproc/libw32_a-misc.o `test -f 'subproc/misc.c' || echo '$(srcdir)/'`subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-misc.Tpo subproc/$(DEPDIR)/libw32_a-misc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/misc.c' object='subproc/libw32_a-misc.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-misc.o `test -f 'subproc/misc.c' || echo '$(srcdir)/'`subproc/misc.c
+
+subproc/libw32_a-misc.obj: subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-misc.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-misc.Tpo -c -o subproc/libw32_a-misc.obj `if test -f 'subproc/misc.c'; then $(CYGPATH_W) 'subproc/misc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/misc.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-misc.Tpo subproc/$(DEPDIR)/libw32_a-misc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/misc.c' object='subproc/libw32_a-misc.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-misc.obj `if test -f 'subproc/misc.c'; then $(CYGPATH_W) 'subproc/misc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/misc.c'; fi`
+
+subproc/libw32_a-sub_proc.o: subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-sub_proc.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo -c -o subproc/libw32_a-sub_proc.o `test -f 'subproc/sub_proc.c' || echo '$(srcdir)/'`subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo subproc/$(DEPDIR)/libw32_a-sub_proc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/sub_proc.c' object='subproc/libw32_a-sub_proc.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-sub_proc.o `test -f 'subproc/sub_proc.c' || echo '$(srcdir)/'`subproc/sub_proc.c
+
+subproc/libw32_a-sub_proc.obj: subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-sub_proc.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo -c -o subproc/libw32_a-sub_proc.obj `if test -f 'subproc/sub_proc.c'; then $(CYGPATH_W) 'subproc/sub_proc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/sub_proc.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo subproc/$(DEPDIR)/libw32_a-sub_proc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/sub_proc.c' object='subproc/libw32_a-sub_proc.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-sub_proc.obj `if test -f 'subproc/sub_proc.c'; then $(CYGPATH_W) 'subproc/sub_proc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/sub_proc.c'; fi`
+
+subproc/libw32_a-w32err.o: subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-w32err.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-w32err.Tpo -c -o subproc/libw32_a-w32err.o `test -f 'subproc/w32err.c' || echo '$(srcdir)/'`subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-w32err.Tpo subproc/$(DEPDIR)/libw32_a-w32err.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/w32err.c' object='subproc/libw32_a-w32err.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-w32err.o `test -f 'subproc/w32err.c' || echo '$(srcdir)/'`subproc/w32err.c
+
+subproc/libw32_a-w32err.obj: subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-w32err.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-w32err.Tpo -c -o subproc/libw32_a-w32err.obj `if test -f 'subproc/w32err.c'; then $(CYGPATH_W) 'subproc/w32err.c'; else $(CYGPATH_W) '$(srcdir)/subproc/w32err.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-w32err.Tpo subproc/$(DEPDIR)/libw32_a-w32err.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/w32err.c' object='subproc/libw32_a-w32err.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-w32err.obj `if test -f 'subproc/w32err.c'; then $(CYGPATH_W) 'subproc/w32err.c'; else $(CYGPATH_W) '$(srcdir)/subproc/w32err.c'; fi`
+
+compat/libw32_a-posixfcn.o: compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT compat/libw32_a-posixfcn.o -MD -MP -MF compat/$(DEPDIR)/libw32_a-posixfcn.Tpo -c -o compat/libw32_a-posixfcn.o `test -f 'compat/posixfcn.c' || echo '$(srcdir)/'`compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) compat/$(DEPDIR)/libw32_a-posixfcn.Tpo compat/$(DEPDIR)/libw32_a-posixfcn.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='compat/posixfcn.c' object='compat/libw32_a-posixfcn.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o compat/libw32_a-posixfcn.o `test -f 'compat/posixfcn.c' || echo '$(srcdir)/'`compat/posixfcn.c
+
+compat/libw32_a-posixfcn.obj: compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT compat/libw32_a-posixfcn.obj -MD -MP -MF compat/$(DEPDIR)/libw32_a-posixfcn.Tpo -c -o compat/libw32_a-posixfcn.obj `if test -f 'compat/posixfcn.c'; then $(CYGPATH_W) 'compat/posixfcn.c'; else $(CYGPATH_W) '$(srcdir)/compat/posixfcn.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) compat/$(DEPDIR)/libw32_a-posixfcn.Tpo compat/$(DEPDIR)/libw32_a-posixfcn.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='compat/posixfcn.c' object='compat/libw32_a-posixfcn.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o compat/libw32_a-posixfcn.obj `if test -f 'compat/posixfcn.c'; then $(CYGPATH_W) 'compat/posixfcn.c'; else $(CYGPATH_W) '$(srcdir)/compat/posixfcn.c'; fi`
+
+libw32_a-pathstuff.o: pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-pathstuff.o -MD -MP -MF $(DEPDIR)/libw32_a-pathstuff.Tpo -c -o libw32_a-pathstuff.o `test -f 'pathstuff.c' || echo '$(srcdir)/'`pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-pathstuff.Tpo $(DEPDIR)/libw32_a-pathstuff.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='pathstuff.c' object='libw32_a-pathstuff.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-pathstuff.o `test -f 'pathstuff.c' || echo '$(srcdir)/'`pathstuff.c
+
+libw32_a-pathstuff.obj: pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-pathstuff.obj -MD -MP -MF $(DEPDIR)/libw32_a-pathstuff.Tpo -c -o libw32_a-pathstuff.obj `if test -f 'pathstuff.c'; then $(CYGPATH_W) 'pathstuff.c'; else $(CYGPATH_W) '$(srcdir)/pathstuff.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-pathstuff.Tpo $(DEPDIR)/libw32_a-pathstuff.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='pathstuff.c' object='libw32_a-pathstuff.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-pathstuff.obj `if test -f 'pathstuff.c'; then $(CYGPATH_W) 'pathstuff.c'; else $(CYGPATH_W) '$(srcdir)/pathstuff.c'; fi`
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f compat/$(DEPDIR)/$(am__dirstamp)
+	-rm -f compat/$(am__dirstamp)
+	-rm -f subproc/$(DEPDIR)/$(am__dirstamp)
+	-rm -f subproc/$(am__dirstamp)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR) compat/$(DEPDIR) subproc/$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR) compat/$(DEPDIR) subproc/$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/w32/compat/dirent.c b/w32/compat/dirent.c
new file mode 100644
index 0000000..56407dd
--- /dev/null
+++ b/w32/compat/dirent.c
@@ -0,0 +1,206 @@
+/* Directory entry code for Window platforms.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+
+#include <config.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <string.h>
+#include <stdlib.h>
+#include "dirent.h"
+
+
+DIR*
+opendir(const char* pDirName)
+{
+        struct stat sb;
+        DIR*    pDir;
+        char*   pEndDirName;
+        int     nBufferLen;
+
+        /* sanity checks */
+        if (!pDirName) {
+                errno = EINVAL;
+                return NULL;
+        }
+        if (stat(pDirName, &sb) != 0) {
+                errno = ENOENT;
+                return NULL;
+        }
+        if ((sb.st_mode & S_IFMT) != S_IFDIR) {
+                errno = ENOTDIR;
+                return NULL;
+        }
+
+        /* allocate a DIR structure to return */
+        pDir = (DIR *) malloc(sizeof (DIR));
+
+        if (!pDir)
+                return NULL;
+
+        /* input directory name length */
+        nBufferLen = strlen(pDirName);
+
+        /* copy input directory name to DIR buffer */
+        strcpy(pDir->dir_pDirectoryName, pDirName);
+
+        /* point to end of the copied directory name */
+        pEndDirName = &pDir->dir_pDirectoryName[nBufferLen - 1];
+
+        /* if directory name did not end in '/' or '\', add '/' */
+        if ((*pEndDirName != '/') && (*pEndDirName != '\\')) {
+                pEndDirName++;
+                *pEndDirName = '/';
+        }
+
+        /* now append the wildcard character to the buffer */
+        pEndDirName++;
+        *pEndDirName = '*';
+        pEndDirName++;
+        *pEndDirName = '\0';
+
+        /* other values defaulted */
+        pDir->dir_nNumFiles = 0;
+        pDir->dir_hDirHandle = INVALID_HANDLE_VALUE;
+        pDir->dir_ulCookie = __DIRENT_COOKIE;
+
+        return pDir;
+}
+
+void
+closedir(DIR *pDir)
+{
+        /* got a valid pointer? */
+        if (!pDir) {
+                errno = EINVAL;
+                return;
+        }
+
+        /* sanity check that this is a DIR pointer */
+        if (pDir->dir_ulCookie != __DIRENT_COOKIE) {
+                errno = EINVAL;
+                return;
+        }
+
+        /* close the WINDOWS32 directory handle */
+        if (pDir->dir_hDirHandle != INVALID_HANDLE_VALUE)
+                FindClose(pDir->dir_hDirHandle);
+
+        free(pDir);
+
+        return;
+}
+
+struct dirent *
+readdir(DIR* pDir)
+{
+        WIN32_FIND_DATA wfdFindData;
+
+        if (!pDir) {
+                errno = EINVAL;
+                return NULL;
+        }
+
+        /* sanity check that this is a DIR pointer */
+        if (pDir->dir_ulCookie != __DIRENT_COOKIE) {
+                errno = EINVAL;
+                return NULL;
+        }
+
+        if (pDir->dir_nNumFiles == 0) {
+                pDir->dir_hDirHandle = FindFirstFile(pDir->dir_pDirectoryName, &wfdFindData);
+                if (pDir->dir_hDirHandle == INVALID_HANDLE_VALUE)
+                        return NULL;
+        } else if (!FindNextFile(pDir->dir_hDirHandle, &wfdFindData))
+                        return NULL;
+
+        /* bump count for next call to readdir() or telldir() */
+        pDir->dir_nNumFiles++;
+
+        /* fill in struct dirent values */
+        pDir->dir_sdReturn.d_ino = (ino_t)-1;
+        strcpy(pDir->dir_sdReturn.d_name, wfdFindData.cFileName);
+
+        return &pDir->dir_sdReturn;
+}
+
+void
+rewinddir(DIR* pDir)
+{
+        if (!pDir) {
+                errno = EINVAL;
+                return;
+        }
+
+        /* sanity check that this is a DIR pointer */
+        if (pDir->dir_ulCookie != __DIRENT_COOKIE) {
+                errno = EINVAL;
+                return;
+        }
+
+        /* close the WINDOWS32 directory handle */
+        if (pDir->dir_hDirHandle != INVALID_HANDLE_VALUE)
+                if (!FindClose(pDir->dir_hDirHandle))
+                        errno = EBADF;
+
+        /* reset members which control readdir() */
+        pDir->dir_hDirHandle = INVALID_HANDLE_VALUE;
+        pDir->dir_nNumFiles = 0;
+
+        return;
+}
+
+int
+telldir(DIR* pDir)
+{
+        if (!pDir) {
+                errno = EINVAL;
+                return -1;
+        }
+
+        /* sanity check that this is a DIR pointer */
+        if (pDir->dir_ulCookie != __DIRENT_COOKIE) {
+                errno = EINVAL;
+                return -1;
+        }
+
+        /* return number of times readdir() called */
+        return pDir->dir_nNumFiles;
+}
+
+void
+seekdir(DIR* pDir, long nPosition)
+{
+        if (!pDir)
+                return;
+
+        /* sanity check that this is a DIR pointer */
+        if (pDir->dir_ulCookie != __DIRENT_COOKIE)
+                return;
+
+        /* go back to beginning of directory */
+        rewinddir(pDir);
+
+        /* loop until we have found position we care about */
+        for (--nPosition; nPosition && readdir(pDir); nPosition--);
+
+        /* flag invalid nPosition value */
+        if (nPosition)
+                errno = EINVAL;
+
+        return;
+}
diff --git a/w32/compat/posixfcn.c b/w32/compat/posixfcn.c
new file mode 100644
index 0000000..b366399
--- /dev/null
+++ b/w32/compat/posixfcn.c
@@ -0,0 +1,486 @@
+/* Replacements for Posix functions and Posix functionality for MS-Windows.
+
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <string.h>
+#include <io.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <windows.h>
+
+#include "dlfcn.h"
+
+#include "makeint.h"
+#include "job.h"
+
+#ifndef NO_OUTPUT_SYNC
+/* Support for OUTPUT_SYNC and related functionality.  */
+
+/* Emulation of fcntl that supports only F_GETFD and F_SETLKW.  */
+int
+fcntl (intptr_t fd, int cmd, ...)
+{
+  va_list ap;
+
+  va_start (ap, cmd);
+
+  switch (cmd)
+    {
+      case F_GETFD:
+        va_end (ap);
+        /* Could have used GetHandleInformation, but that isn't
+           supported on Windows 9X.  */
+        if (_get_osfhandle (fd) == -1)
+          return -1;
+        return 0;
+      case F_SETLKW:
+        {
+          void *buf = va_arg (ap, void *);
+          struct flock *fl = (struct flock *)buf;
+          HANDLE hmutex = (HANDLE)fd;
+          static struct flock last_fl;
+          short last_type = last_fl.l_type;
+
+          va_end (ap);
+
+          if (hmutex == INVALID_HANDLE_VALUE || !hmutex)
+            return -1;
+
+          last_fl = *fl;
+
+          switch (fl->l_type)
+            {
+
+              case F_WRLCK:
+                {
+                  DWORD result;
+
+                  if (last_type == F_WRLCK)
+                    {
+                      /* Don't call WaitForSingleObject if we already
+                         own the mutex, because doing so will require
+                         us to call ReleaseMutex an equal number of
+                         times, before the mutex is actually
+                         released.  */
+                      return 0;
+                    }
+
+                  result = WaitForSingleObject (hmutex, INFINITE);
+                  switch (result)
+                    {
+                      case WAIT_OBJECT_0:
+                        /* We don't care if the mutex owner crashed or
+                           exited.  */
+                      case WAIT_ABANDONED:
+                        return 0;
+                      case WAIT_FAILED:
+                      case WAIT_TIMEOUT: /* cannot happen, really */
+                        {
+                          DWORD err = GetLastError ();
+
+                          /* Invalidate the last command.  */
+                          memset (&last_fl, 0, sizeof (last_fl));
+
+                          switch (err)
+                            {
+                              case ERROR_INVALID_HANDLE:
+                              case ERROR_INVALID_FUNCTION:
+                                errno = EINVAL;
+                                return -1;
+                              default:
+                                errno = EDEADLOCK;
+                                return -1;
+                            }
+                        }
+                    }
+                }
+              case F_UNLCK:
+                {
+                  /* FIXME: Perhaps we should call ReleaseMutex
+                     repatedly until it errors out, to make sure the
+                     mutext is released even if we somehow managed to
+                     to take ownership multiple times?  */
+                  BOOL status = ReleaseMutex (hmutex);
+
+                  if (status)
+                    return 0;
+                  else
+                    {
+                      DWORD err = GetLastError ();
+
+                      if (err == ERROR_NOT_OWNER)
+                        errno = EPERM;
+                      else
+                        {
+                          memset (&last_fl, 0, sizeof (last_fl));
+                          errno = EINVAL;
+                        }
+                      return -1;
+                    }
+                }
+              default:
+                errno = ENOSYS;
+                return -1;
+            }
+        }
+      default:
+        errno = ENOSYS;
+        va_end (ap);
+        return -1;
+    }
+}
+
+static intptr_t mutex_handle = -1;
+
+/* Record in a static variable the mutex handle we were requested to
+   use.  That nameless mutex was created by the top-level Make, and
+   its handle was passed to us via inheritance.  The value of that
+   handle is passed via the command-line arguments, so that we know
+   which handle to use.  */
+void
+record_sync_mutex (const char *str)
+{
+  char *endp;
+  intptr_t hmutex = strtol (str, &endp, 16);
+
+  if (*endp == '\0')
+    mutex_handle = hmutex;
+  else
+    {
+      mutex_handle = -1;
+      errno = EINVAL;
+    }
+}
+
+/* Create a new mutex or reuse one created by our parent.  */
+intptr_t
+create_mutex (void)
+{
+  SECURITY_ATTRIBUTES secattr;
+  intptr_t hmutex = -1;
+
+  /* If we have a mutex handle passed from the parent Make, just use
+     that.  */
+  if (mutex_handle > 0)
+    return mutex_handle;
+
+  /* We are the top-level Make, and we want the handle to be inherited
+     by our child processes.  */
+  secattr.nLength = sizeof (secattr);
+  secattr.lpSecurityDescriptor = NULL; /* use default security descriptor */
+  secattr.bInheritHandle = TRUE;
+
+  hmutex = (intptr_t)CreateMutex (&secattr, FALSE, NULL);
+  if (!hmutex)
+    {
+      DWORD err = GetLastError ();
+
+      fprintf (stderr, "CreateMutex: error %lu\n", err);
+      errno = ENOLCK;
+      hmutex = -1;
+    }
+
+  mutex_handle = hmutex;
+  return hmutex;
+}
+
+/* Return non-zero if F1 and F2 are 2 streams representing the same
+   file or pipe or device.  */
+int
+same_stream (FILE *f1, FILE *f2)
+{
+  HANDLE fh1 = (HANDLE)_get_osfhandle (fileno (f1));
+  HANDLE fh2 = (HANDLE)_get_osfhandle (fileno (f2));
+
+  /* Invalid file descriptors get treated as different streams.  */
+  if (fh1 && fh1 != INVALID_HANDLE_VALUE
+      && fh2 && fh2 != INVALID_HANDLE_VALUE)
+    {
+      if (fh1 == fh2)
+        return 1;
+      else
+        {
+          DWORD ftyp1 = GetFileType (fh1), ftyp2 = GetFileType (fh2);
+
+          if (ftyp1 != ftyp2
+              || ftyp1 == FILE_TYPE_UNKNOWN || ftyp2 == FILE_TYPE_UNKNOWN)
+            return 0;
+          else if (ftyp1 == FILE_TYPE_CHAR)
+            {
+              /* For character devices, check if they both refer to a
+                 console.  This loses if both handles refer to the
+                 null device (FIXME!), but in that case we don't care
+                 in the context of Make.  */
+              DWORD conmode1, conmode2;
+
+              /* Each process on Windows can have at most 1 console,
+                 so if both handles are for the console device, they
+                 are the same.  We also compare the console mode to
+                 distinguish between stdin and stdout/stderr.  */
+              if (GetConsoleMode (fh1, &conmode1)
+                  && GetConsoleMode (fh2, &conmode2)
+                  && conmode1 == conmode2)
+                return 1;
+            }
+          else
+            {
+              /* For disk files and pipes, compare their unique
+                 attributes.  */
+              BY_HANDLE_FILE_INFORMATION bhfi1, bhfi2;
+
+              /* Pipes get zero in the volume serial number, but do
+                 appear to have meaningful information in file index
+                 attributes.  We test file attributes as well, for a
+                 good measure.  */
+              if (GetFileInformationByHandle (fh1, &bhfi1)
+                  && GetFileInformationByHandle (fh2, &bhfi2))
+                return (bhfi1.dwVolumeSerialNumber == bhfi2.dwVolumeSerialNumber
+                        && bhfi1.nFileIndexLow == bhfi2.nFileIndexLow
+                        && bhfi1.nFileIndexHigh == bhfi2.nFileIndexHigh
+                        && bhfi1.dwFileAttributes == bhfi2.dwFileAttributes);
+            }
+        }
+    }
+  return 0;
+}
+
+/* A replacement for tmpfile, since the MSVCRT implementation creates
+   the file in the root directory of the current drive, which might
+   not be writable by our user.  Most of the code borrowed from
+   create_batch_file, see job.c.  */
+FILE *
+tmpfile (void)
+{
+  char temp_path[MAXPATHLEN];
+  unsigned path_size = GetTempPath (sizeof temp_path, temp_path);
+  int path_is_dot = 0;
+  /* The following variable is static so we won't try to reuse a name
+     that was generated a little while ago, because that file might
+     not be on disk yet, since we use FILE_ATTRIBUTE_TEMPORARY below,
+     which tells the OS it doesn't need to flush the cache to disk.
+     If the file is not yet on disk, we might think the name is
+     available, while it really isn't.  This happens in parallel
+     builds, where Make doesn't wait for one job to finish before it
+     launches the next one.  */
+  static unsigned uniq = 0;
+  static int second_loop = 0;
+  const char base[] = "gmake_tmpf";
+  const unsigned sizemax = sizeof base - 1 + 4 + 10 + 10;
+  unsigned pid = GetCurrentProcessId ();
+
+  if (path_size == 0)
+    {
+      path_size = GetCurrentDirectory (sizeof temp_path, temp_path);
+      path_is_dot = 1;
+    }
+
+  ++uniq;
+  if (uniq >= 0x10000 && !second_loop)
+    {
+      /* If we already had 64K batch files in this
+         process, make a second loop through the numbers,
+         looking for free slots, i.e. files that were
+         deleted in the meantime.  */
+      second_loop = 1;
+      uniq = 1;
+    }
+  while (path_size > 0 &&
+         path_size + sizemax < sizeof temp_path &&
+         !(uniq >= 0x10000 && second_loop))
+    {
+      HANDLE h;
+
+      sprintf (temp_path + path_size,
+               "%s%s%u-%x.tmp",
+               temp_path[path_size - 1] == '\\' ? "" : "\\",
+               base, pid, uniq);
+      h = CreateFile (temp_path,  /* file name */
+                      GENERIC_READ | GENERIC_WRITE | DELETE, /* desired access */
+                      FILE_SHARE_READ | FILE_SHARE_WRITE,    /* share mode */
+                      NULL,                                  /* default security attributes */
+                      CREATE_NEW,                            /* creation disposition */
+                      FILE_ATTRIBUTE_NORMAL |                /* flags and attributes */
+                      FILE_ATTRIBUTE_TEMPORARY |
+                      FILE_FLAG_DELETE_ON_CLOSE,
+                      NULL);                                 /* no template file */
+
+      if (h == INVALID_HANDLE_VALUE)
+        {
+          const DWORD er = GetLastError ();
+
+          if (er == ERROR_FILE_EXISTS || er == ERROR_ALREADY_EXISTS)
+            {
+              ++uniq;
+              if (uniq == 0x10000 && !second_loop)
+                {
+                  second_loop = 1;
+                  uniq = 1;
+                }
+            }
+
+          /* The temporary path is not guaranteed to exist, or might
+             not be writable by user.  Use the current directory as
+             fallback.  */
+          else if (path_is_dot == 0)
+            {
+              path_size = GetCurrentDirectory (sizeof temp_path, temp_path);
+              path_is_dot = 1;
+            }
+
+          else
+            {
+              errno = EACCES;
+              break;
+            }
+        }
+      else
+        {
+          int fd = _open_osfhandle ((intptr_t)h, 0);
+
+          return _fdopen (fd, "w+b");
+        }
+    }
+
+  if (uniq >= 0x10000)
+    errno = EEXIST;
+  return NULL;
+}
+
+#endif  /* !NO_OUTPUT_SYNC */
+
+#if MAKE_LOAD
+
+/* Support for dynamic loading of objects.  */
+
+
+static DWORD last_err;
+
+void *
+dlopen (const char *file, int mode)
+{
+  char dllfn[MAX_PATH], *p;
+  HANDLE dllhandle;
+
+  if ((mode & ~(RTLD_LAZY | RTLD_NOW | RTLD_GLOBAL)) != 0)
+    {
+      errno = EINVAL;
+      last_err = ERROR_INVALID_PARAMETER;
+      return NULL;
+    }
+
+  if (!file)
+    dllhandle = GetModuleHandle (NULL);
+  else
+    {
+      /* MSDN says to be sure to use backslashes in the DLL file name.  */
+      strcpy (dllfn, file);
+      for (p = dllfn; *p; p++)
+        if (*p == '/')
+          *p = '\\';
+
+      dllhandle = LoadLibrary (dllfn);
+    }
+  if (!dllhandle)
+    last_err = GetLastError ();
+
+  return dllhandle;
+}
+
+char *
+dlerror (void)
+{
+  static char errbuf[1024];
+  DWORD ret;
+
+  if (!last_err)
+    return NULL;
+
+  ret = FormatMessage (FORMAT_MESSAGE_FROM_SYSTEM
+                       | FORMAT_MESSAGE_IGNORE_INSERTS,
+                       NULL, last_err, 0, errbuf, sizeof (errbuf), NULL);
+  while (ret > 0 && (errbuf[ret - 1] == '\n' || errbuf[ret - 1] == '\r'))
+    --ret;
+
+  errbuf[ret] = '\0';
+  if (!ret)
+    sprintf (errbuf, "Error code %lu", last_err);
+
+  last_err = 0;
+  return errbuf;
+}
+
+void *
+dlsym (void *handle, const char *name)
+{
+  FARPROC addr = NULL;
+
+  if (!handle || handle == INVALID_HANDLE_VALUE)
+    {
+      last_err = ERROR_INVALID_PARAMETER;
+      return NULL;
+    }
+
+  addr = GetProcAddress (handle, name);
+  if (!addr)
+    last_err = GetLastError ();
+
+  return (void *)addr;
+}
+
+int
+dlclose (void *handle)
+{
+  if (!handle || handle == INVALID_HANDLE_VALUE)
+    return -1;
+  if (!FreeLibrary (handle))
+    return -1;
+
+  return 0;
+}
+
+
+#endif  /* MAKE_LOAD */
+
+
+/* MS runtime's isatty returns non-zero for any character device,
+   including the null device, which is not what we want.  */
+int
+isatty (int fd)
+{
+  HANDLE fh = (HANDLE) _get_osfhandle (fd);
+  DWORD con_mode;
+
+  if (fh == INVALID_HANDLE_VALUE)
+    {
+      errno = EBADF;
+      return 0;
+    }
+  if (GetConsoleMode (fh, &con_mode))
+    return 1;
+
+  errno = ENOTTY;
+  return 0;
+}
+
+char *
+ttyname (int fd)
+{
+  /* This "knows" that Make only asks about stdout and stderr.  A more
+     sophisticated implementation should test whether FD is open for
+     input or output.  We can do that by looking at the mode returned
+     by GetConsoleMode.  */
+  return "CONOUT$";
+}
diff --git a/w32/include/dirent.h b/w32/include/dirent.h
new file mode 100644
index 0000000..13308de
--- /dev/null
+++ b/w32/include/dirent.h
@@ -0,0 +1,59 @@
+/* Windows version of dirent.h
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _DIRENT_H
+#define _DIRENT_H
+
+#ifdef __MINGW32__
+# include <windows.h>
+# include_next <dirent.h>
+#else
+
+#include <stdlib.h>
+#include <windows.h>
+#include <limits.h>
+#include <sys/types.h>
+
+#ifndef NAME_MAX
+#define NAME_MAX 255
+#endif
+
+#define __DIRENT_COOKIE 0xfefeabab
+
+
+struct dirent
+{
+  ino_t d_ino;                  /* unused - no equivalent on WINDOWS32 */
+  char d_name[NAME_MAX+1];
+};
+
+typedef struct dir_struct {
+        ULONG   dir_ulCookie;
+        HANDLE  dir_hDirHandle;
+        DWORD   dir_nNumFiles;
+        char    dir_pDirectoryName[NAME_MAX+1];
+        struct dirent dir_sdReturn;
+} DIR;
+
+DIR *opendir(const char *);
+struct dirent *readdir(DIR *);
+void rewinddir(DIR *);
+void closedir(DIR *);
+int telldir(DIR *);
+void seekdir(DIR *, long);
+
+#endif  /* !__MINGW32__ */
+#endif
diff --git a/w32/include/dlfcn.h b/w32/include/dlfcn.h
new file mode 100644
index 0000000..c64ac7b
--- /dev/null
+++ b/w32/include/dlfcn.h
@@ -0,0 +1,29 @@
+/* dlfcn.h replacement for MS-Windows build.
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef DLFCN_H
+#define DLFCN_H
+
+#define RTLD_LAZY   1
+#define RTLD_NOW    2
+#define RTLD_GLOBAL 4
+
+extern void *dlopen (const char *, int);
+extern void *dlsym (void *, const char *);
+extern char *dlerror (void);
+extern int   dlclose (void *);
+
+#endif  /* DLFCN_H */
diff --git a/w32/include/pathstuff.h b/w32/include/pathstuff.h
new file mode 100644
index 0000000..fb03f12
--- /dev/null
+++ b/w32/include/pathstuff.h
@@ -0,0 +1,25 @@
+/* Definitions for Windows path manipulation.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _PATHSTUFF_H
+#define _PATHSTUFF_H
+
+char *convert_Path_to_windows32(char *Path, char to_delim);
+char *convert_vpath_to_windows32(char *Path, char to_delim);
+char *w32ify(const char *file, int resolve);
+char *getcwd_fs(char *buf, int len);
+
+#endif
diff --git a/w32/include/sub_proc.h b/w32/include/sub_proc.h
new file mode 100644
index 0000000..1e1b213
--- /dev/null
+++ b/w32/include/sub_proc.h
@@ -0,0 +1,71 @@
+/* Definitions for Windows process invocation.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef SUB_PROC_H
+#define SUB_PROC_H
+
+/*
+ * Component Name:
+ *
+ * $Date$
+ *
+ * $Source$
+ *
+ * $Id$
+ */
+
+#define EXTERN_DECL(entry, args) extern entry args
+#define VOID_DECL void
+
+EXTERN_DECL(HANDLE process_init, (VOID_DECL));
+EXTERN_DECL(HANDLE process_init_fd, (HANDLE stdinh, HANDLE stdouth,
+        HANDLE stderrh));
+EXTERN_DECL(long process_begin, (HANDLE proc, char **argv, char **envp,
+        char *exec_path, char *as_user));
+EXTERN_DECL(long process_pipe_io, (HANDLE proc, char *stdin_data,
+        int stdin_data_len));
+EXTERN_DECL(long process_file_io, (HANDLE proc));
+EXTERN_DECL(void process_cleanup, (HANDLE proc));
+EXTERN_DECL(HANDLE process_wait_for_any, (int block, DWORD* pdwWaitStatus));
+EXTERN_DECL(void process_register, (HANDLE proc));
+EXTERN_DECL(HANDLE process_easy, (char** argv, char** env,
+                                  int outfd, int errfd));
+EXTERN_DECL(BOOL process_kill, (HANDLE proc, int signal));
+EXTERN_DECL(int process_used_slots, (VOID_DECL));
+
+/* support routines */
+EXTERN_DECL(long process_errno, (HANDLE proc));
+EXTERN_DECL(long process_last_err, (HANDLE proc));
+EXTERN_DECL(long process_exit_code, (HANDLE proc));
+EXTERN_DECL(long process_signal, (HANDLE proc));
+EXTERN_DECL(char * process_outbuf, (HANDLE proc));
+EXTERN_DECL(char * process_errbuf, (HANDLE proc));
+EXTERN_DECL(int process_outcnt, (HANDLE proc));
+EXTERN_DECL(int process_errcnt, (HANDLE proc));
+EXTERN_DECL(void process_pipes, (HANDLE proc, int pipes[3]));
+EXTERN_DECL(void process_noinherit, (int fildes));
+
+/* jobserver routines */
+EXTERN_DECL(int open_jobserver_semaphore, (const char* name));
+EXTERN_DECL(int create_jobserver_semaphore, (int tokens));
+EXTERN_DECL(void free_jobserver_semaphore, (VOID_DECL));
+EXTERN_DECL(int acquire_jobserver_semaphore, (VOID_DECL));
+EXTERN_DECL(int release_jobserver_semaphore, (VOID_DECL));
+EXTERN_DECL(int has_jobserver_semaphore, (VOID_DECL));
+EXTERN_DECL(char* get_jobserver_semaphore_name, (VOID_DECL));
+EXTERN_DECL(int wait_for_semaphore_or_child_process, (VOID_DECL));
+
+#endif
diff --git a/w32/include/w32err.h b/w32/include/w32err.h
new file mode 100644
index 0000000..7d72226
--- /dev/null
+++ b/w32/include/w32err.h
@@ -0,0 +1,26 @@
+/* Definitions for Windows error handling.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _W32ERR_H_
+#define _W32ERR_H_
+
+#ifndef EXTERN_DECL
+#define EXTERN_DECL(entry, args) entry args
+#endif
+
+EXTERN_DECL(const char * map_windows32_error_to_string, (DWORD error));
+
+#endif /* !_W32ERR_H */
diff --git a/w32/pathstuff.c b/w32/pathstuff.c
new file mode 100644
index 0000000..55332ab
--- /dev/null
+++ b/w32/pathstuff.c
@@ -0,0 +1,266 @@
+/* Path conversion for Windows pathnames.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include <string.h>
+#include <stdlib.h>
+#include "pathstuff.h"
+
+/*
+ * Convert delimiter separated vpath to Canonical format.
+ */
+char *
+convert_vpath_to_windows32(char *Path, char to_delim)
+{
+    char *etok;            /* token separator for old Path */
+
+        /*
+         * Convert all spaces to delimiters. Note that pathnames which
+         * contain blanks get trounced here. Use 8.3 format as a workaround.
+         */
+        for (etok = Path; etok && *etok; etok++)
+                if (isblank ((unsigned char) *etok))
+                        *etok = to_delim;
+
+        return (convert_Path_to_windows32(Path, to_delim));
+}
+
+/*
+ * Convert delimiter separated path to Canonical format.
+ */
+char *
+convert_Path_to_windows32(char *Path, char to_delim)
+{
+    char *etok;            /* token separator for old Path */
+    char *p;            /* points to element of old Path */
+
+    /* is this a multi-element Path ? */
+    /* FIXME: Perhaps use ":;\"" in strpbrk to convert all quotes to
+       delimiters as well, as a way to handle quoted directories in
+       PATH?  */
+    for (p = Path, etok = strpbrk(p, ":;");
+         etok;
+         etok = strpbrk(p, ":;"))
+        if ((etok - p) == 1) {
+            if (*(etok - 1) == ';' ||
+                *(etok - 1) == ':') {
+                etok[-1] = to_delim;
+                etok[0] = to_delim;
+                p = ++etok;
+                continue;    /* ignore empty bucket */
+            } else if (!isalpha ((unsigned char) *p)) {
+                /* found one to count, handle things like '.' */
+                *etok = to_delim;
+                p = ++etok;
+            } else if ((*etok == ':') && (etok = strpbrk(etok+1, ":;"))) {
+                /* found one to count, handle drive letter */
+                *etok = to_delim;
+                p = ++etok;
+            } else
+                /* all finished, force abort */
+                p += strlen(p);
+        } else if (*p == '"') { /* a quoted directory */
+            for (p++; *p && *p != '"'; p++) /* skip quoted part */
+                ;
+            etok = strpbrk(p, ":;");        /* find next delimiter */
+            if (etok) {
+                *etok = to_delim;
+                p = ++etok;
+            } else
+                p += strlen(p);
+        } else {
+            /* found another one, no drive letter */
+            *etok = to_delim;
+            p = ++etok;
+        }
+
+    return Path;
+}
+
+/*
+ * Convert to forward slashes. Resolve to full pathname optionally
+ */
+char *
+w32ify(const char *filename, int resolve)
+{
+    static char w32_path[FILENAME_MAX];
+    char *p;
+
+    if (resolve)
+        _fullpath(w32_path, filename, sizeof (w32_path));
+    else
+        strncpy(w32_path, filename, sizeof (w32_path));
+
+    for (p = w32_path; p && *p; p++)
+        if (*p == '\\')
+            *p = '/';
+
+    return w32_path;
+}
+
+char *
+getcwd_fs(char* buf, int len)
+{
+        char *p = getcwd(buf, len);
+
+        if (p) {
+                char *q = w32ify(buf, 0);
+                strncpy(buf, q, len);
+        }
+
+        return p;
+}
+
+#ifdef unused
+/*
+ * Convert delimiter separated pathnames (e.g. PATH) or single file pathname
+ * (e.g. c:/foo, c:\bar) to NutC format. If we are handed a string that
+ * _NutPathToNutc() fails to convert, just return the path we were handed
+ * and assume the caller will know what to do with it (It was probably
+ * a mistake to try and convert it anyway due to some of the bizarre things
+ * that might look like pathnames in makefiles).
+ */
+char *
+convert_path_to_nutc(char *path)
+{
+    int  count;            /* count of path elements */
+    char *nutc_path;     /* new NutC path */
+    int  nutc_path_len;    /* length of buffer to allocate for new path */
+    char *pathp;        /* pointer to nutc_path used to build it */
+    char *etok;            /* token separator for old path */
+    char *p;            /* points to element of old path */
+    char sep;            /* what flavor of separator used in old path */
+    char *rval;
+
+    /* is this a multi-element path ? */
+    for (p = path, etok = strpbrk(p, ":;"), count = 0;
+         etok;
+         etok = strpbrk(p, ":;"))
+        if ((etok - p) == 1) {
+            if (*(etok - 1) == ';' ||
+                *(etok - 1) == ':') {
+                p = ++etok;
+                continue;    /* ignore empty bucket */
+            } else if (etok = strpbrk(etok+1, ":;"))
+                /* found one to count, handle drive letter */
+                p = ++etok, count++;
+            else
+                /* all finished, force abort */
+                p += strlen(p);
+        } else
+            /* found another one, no drive letter */
+            p = ++etok, count++;
+
+    if (count) {
+        count++;    /* x1;x2;x3 <- need to count x3 */
+
+        /*
+         * Hazard a guess on how big the buffer needs to be.
+         * We have to convert things like c:/foo to /c=/foo.
+         */
+        nutc_path_len = strlen(path) + (count*2) + 1;
+        nutc_path = xmalloc(nutc_path_len);
+        pathp = nutc_path;
+        *pathp = '\0';
+
+        /*
+         * Loop through PATH and convert one elemnt of the path at at
+         * a time. Single file pathnames will fail this and fall
+         * to the logic below loop.
+         */
+        for (p = path, etok = strpbrk(p, ":;");
+             etok;
+             etok = strpbrk(p, ":;")) {
+
+            /* don't trip up on device specifiers or empty path slots */
+            if ((etok - p) == 1)
+                if (*(etok - 1) == ';' ||
+                    *(etok - 1) == ':') {
+                    p = ++etok;
+                    continue;
+                } else if ((etok = strpbrk(etok+1, ":;")) == NULL)
+                    break;    /* thing found was a WINDOWS32 pathname */
+
+            /* save separator */
+            sep = *etok;
+
+            /* terminate the current path element -- temporarily */
+            *etok = '\0';
+
+#ifdef __NUTC__
+            /* convert to NutC format */
+            if (_NutPathToNutc(p, pathp, 0) == FALSE) {
+                free(nutc_path);
+                rval = savestring(path, strlen(path));
+                return rval;
+            }
+#else
+            *pathp++ = '/';
+            *pathp++ = p[0];
+            *pathp++ = '=';
+            *pathp++ = '/';
+            strcpy(pathp, &p[2]);
+#endif
+
+            pathp += strlen(pathp);
+            *pathp++ = ':';     /* use Unix style path separtor for new path */
+            *pathp   = '\0'; /* make sure we are null terminaed */
+
+            /* restore path separator */
+            *etok = sep;
+
+            /* point p to first char of next path element */
+            p = ++etok;
+
+        }
+    } else {
+        nutc_path_len = strlen(path) + 3;
+        nutc_path = xmalloc(nutc_path_len);
+        pathp = nutc_path;
+        *pathp = '\0';
+        p = path;
+    }
+
+    /*
+      * OK, here we handle the last element in PATH (e.g. c of a;b;c)
+     * or the path was a single filename and will be converted
+     * here. Note, testing p here assures that we don't trip up
+     * on paths like a;b; which have trailing delimiter followed by
+     * nothing.
+     */
+    if (*p != '\0') {
+#ifdef __NUTC__
+        if (_NutPathToNutc(p, pathp, 0) == FALSE) {
+            free(nutc_path);
+            rval = savestring(path, strlen(path));
+            return rval;
+        }
+#else
+        *pathp++ = '/';
+        *pathp++ = p[0];
+        *pathp++ = '=';
+        *pathp++ = '/';
+        strcpy(pathp, &p[2]);
+#endif
+    } else
+        *(pathp-1) = '\0'; /* we're already done, don't leave trailing : */
+
+    rval = savestring(nutc_path, strlen(nutc_path));
+    free(nutc_path);
+    return rval;
+}
+
+#endif
diff --git a/w32/subproc/NMakefile b/w32/subproc/NMakefile
new file mode 100644
index 0000000..ebf516d
--- /dev/null
+++ b/w32/subproc/NMakefile
@@ -0,0 +1,60 @@
+# NOTE: If you have no 'make' program at all to process this makefile, run
+# 'build.bat' instead.
+#
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+#       NMakefile for GNU Make (subproc library)
+#
+LIB = lib
+CC = cl
+MAKE = nmake
+
+OUTDIR=.
+MAKEFILE=NMakefile
+
+CFLAGS_any = /nologo /MT /W4 /GX /Z7 /YX /D WIN32 /D WINDOWS32 /D _WINDOWS  -I. -I../include -I../../
+CFLAGS_debug = $(CFLAGS_any) /Od /D _DEBUG /FR.\WinDebug\ /Fp.\WinDebug\subproc.pch /Fo.\WinDebug/
+CFLAGS_release = $(CFLAGS_any) /O2 /FR.\WinRel\ /Fp.\WinRel\subproc.pch /Fo.\WinRel/
+
+all: Release Debug
+
+Release:
+	$(MAKE) /f $(MAKEFILE) OUTDIR=WinRel CFLAGS="$(CFLAGS_release)" WinRel/subproc.lib
+Debug:
+	$(MAKE) /f $(MAKEFILE) OUTDIR=WinDebug CFLAGS="$(CFLAGS_debug)" WinDebug/subproc.lib
+
+clean:
+	rmdir /s /q WinRel WinDebug
+	erase *.pdb
+
+$(OUTDIR):
+	if not exist .\$@\nul mkdir .\$@
+
+OBJS = $(OUTDIR)/misc.obj $(OUTDIR)/w32err.obj $(OUTDIR)/sub_proc.obj
+
+$(OUTDIR)/subproc.lib: $(OUTDIR) $(OBJS)
+	$(LIB) -out:$@ @<<
+		$(OBJS)
+<<
+
+.c{$(OUTDIR)}.obj:
+	$(CC) $(CFLAGS) /c $<
+
+$(OUTDIR)/misc.obj: misc.c proc.h
+$(OUTDIR)/sub_proc.obj: sub_proc.c  ../include/sub_proc.h ../include/w32err.h proc.h
+$(OUTDIR)/w32err.obj: w32err.c ../include/w32err.h
diff --git a/w32/subproc/build.bat b/w32/subproc/build.bat
new file mode 100644
index 0000000..f8604ce
--- /dev/null
+++ b/w32/subproc/build.bat
@@ -0,0 +1,34 @@
+@if "%COMPILER%" == "gcc" GoTo GCCBuild

+if not exist .\WinDebug\nul mkdir .\WinDebug

+cl.exe /nologo /MT /W4 /GX /Z7 /YX /Od /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D _DEBUG /D _WINDOWS /FR.\WinDebug/ /Fp.\WinDebug/subproc.pch /Fo.\WinDebug/ /c misc.c

+cl.exe /nologo /MT /W4 /GX /Z7 /YX /Od /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D _DEBUG /D _WINDOWS /FR.\WinDebug/ /Fp.\WinDebug/subproc.pch /Fo.\WinDebug/ /c sub_proc.c

+cl.exe /nologo /MT /W4 /GX /Z7 /YX /Od /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D _DEBUG /D _WINDOWS /FR.\WinDebug/ /Fp.\WinDebug/subproc.pch /Fo.\WinDebug/ /c w32err.c

+lib.exe /NOLOGO /OUT:.\WinDebug\subproc.lib  .\WinDebug/misc.obj  .\WinDebug/sub_proc.obj  .\WinDebug/w32err.obj

+if not exist .\WinRel\nul mkdir .\WinRel

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D NDEBUG /D _WINDOWS /FR.\WinRel/ /Fp.\WinRel/subproc.pch /Fo.\WinRel/ /c misc.c

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D NDEBUG /D _WINDOWS /FR.\WinRel/ /Fp.\WinRel/subproc.pch /Fo.\WinRel/ /c sub_proc.c

+cl.exe /nologo /MT /W4 /GX /YX /O2 /I .. /I . /I ../include /I ../.. /D WIN32 /D WINDOWS32 /D NDEBUG /D _WINDOWS /FR.\WinRel/ /Fp.\WinRel/subproc.pch /Fo.\WinRel/ /c w32err.c

+lib.exe /NOLOGO /OUT:.\WinRel\subproc.lib  .\WinRel/misc.obj  .\WinRel/sub_proc.obj  .\WinRel/w32err.obj

+GoTo BuildEnd

+:GCCBuild

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I.. -I. -I../include -I../.. -DWINDOWS32 -c misc.c -o ../../w32_misc.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I.. -I. -I../include -I../.. -DWINDOWS32 -c sub_proc.c -o ../../sub_proc.o

+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I.. -I. -I../include -I../.. -DWINDOWS32 -c w32err.c -o ../../w32err.o

+:BuildEnd

+

+@echo off

+rem Copyright (C) 1996-2014 Free Software Foundation, Inc.

+rem This file is part of GNU Make.

+rem

+rem GNU Make is free software; you can redistribute it and/or modify it under

+rem the terms of the GNU General Public License as published by the Free

+rem Software Foundation; either version 3 of the License, or (at your option)

+rem any later version.

+rem

+rem GNU Make is distributed in the hope that it will be useful, but WITHOUT

+rem ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

+rem FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.

+rem more details.

+rem

+rem You should have received a copy of the GNU General Public License along

+rem with this program.  If not, see <http://www.gnu.org/licenses/>.

diff --git a/w32/subproc/misc.c b/w32/subproc/misc.c
new file mode 100644
index 0000000..3f3bdf8
--- /dev/null
+++ b/w32/subproc/misc.c
@@ -0,0 +1,83 @@
+/* Process handling for Windows
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <config.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <windows.h>
+#include "proc.h"
+
+
+/*
+ * Description:  Convert a NULL string terminated UNIX environment block to
+ *              an environment block suitable for a windows32 system call
+ *
+ * Returns:  TRUE= success, FALSE=fail
+ *
+ * Notes/Dependencies:  the environment block is sorted in case-insensitive
+ *      order, is double-null terminated, and is a char *, not a char **
+ */
+int _cdecl compare(const void *a1, const void *a2)
+{
+        return _stricoll(*((char**)a1),*((char**)a2));
+}
+bool_t
+arr2envblk(char **arr, char **envblk_out, int *envsize_needed)
+{
+        char **tmp;
+        int size_needed;
+        int arrcnt;
+        char *ptr;
+
+        arrcnt = 0;
+        while (arr[arrcnt]) {
+                arrcnt++;
+        }
+
+        tmp = (char**) calloc(arrcnt + 1, sizeof(char *));
+        if (!tmp) {
+                return FALSE;
+        }
+
+        arrcnt = 0;
+        size_needed = *envsize_needed = 0;
+        while (arr[arrcnt]) {
+                tmp[arrcnt] = arr[arrcnt];
+                size_needed += strlen(arr[arrcnt]) + 1;
+                arrcnt++;
+        }
+        size_needed++;
+        *envsize_needed = size_needed;
+
+        qsort((void *) tmp, (size_t) arrcnt, sizeof (char*), compare);
+
+        ptr = *envblk_out = calloc(size_needed, 1);
+        if (!ptr) {
+                free(tmp);
+                return FALSE;
+        }
+
+        arrcnt = 0;
+        while (tmp[arrcnt]) {
+                strcpy(ptr, tmp[arrcnt]);
+                ptr += strlen(tmp[arrcnt]) + 1;
+                arrcnt++;
+        }
+
+        free(tmp);
+        return TRUE;
+}
diff --git a/w32/subproc/proc.h b/w32/subproc/proc.h
new file mode 100644
index 0000000..1e4054c
--- /dev/null
+++ b/w32/subproc/proc.h
@@ -0,0 +1,29 @@
+/* Definitions for Windows
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef  _PROC_H
+#define _PROC_H
+
+typedef int bool_t;
+
+#define E_SCALL         101
+#define E_IO            102
+#define E_NO_MEM        103
+#define E_FORK          104
+
+extern bool_t arr2envblk(char **arr, char **envblk_out, int *envsize_needed);
+
+#endif
diff --git a/w32/subproc/sub_proc.c b/w32/subproc/sub_proc.c
new file mode 100644
index 0000000..5496c7e
--- /dev/null
+++ b/w32/subproc/sub_proc.c
@@ -0,0 +1,1561 @@
+/* Process handling for Windows.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <config.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <io.h>         /* for _get_osfhandle */
+#ifdef _MSC_VER
+# include <stddef.h>    /* for intptr_t */
+#else
+# include <stdint.h>
+#endif
+#include <string.h>
+#include <process.h>  /* for msvc _beginthreadex, _endthreadex */
+#include <signal.h>
+#include <windows.h>
+
+#include "makeint.h"
+#include "filedef.h"
+#include "variable.h"
+#include "sub_proc.h"
+#include "proc.h"
+#include "w32err.h"
+#include "debug.h"
+
+static char *make_command_line(char *shell_name, char *exec_path, char **argv);
+
+typedef struct sub_process_t {
+        intptr_t sv_stdin[2];
+        intptr_t sv_stdout[2];
+        intptr_t sv_stderr[2];
+        int using_pipes;
+        char *inp;
+        DWORD incnt;
+        char * volatile outp;
+        volatile DWORD outcnt;
+        char * volatile errp;
+        volatile DWORD errcnt;
+        pid_t pid;
+        int exit_code;
+        int signal;
+        long last_err;
+        long lerrno;
+} sub_process;
+
+/* keep track of children so we can implement a waitpid-like routine */
+static sub_process *proc_array[MAXIMUM_WAIT_OBJECTS];
+static int proc_index = 0;
+static int fake_exits_pending = 0;
+
+/* Windows jobserver implementation variables */
+static char jobserver_semaphore_name[MAX_PATH + 1];
+static HANDLE jobserver_semaphore = NULL;
+
+/* Open existing jobserver semaphore */
+int open_jobserver_semaphore(const char* name)
+{
+    jobserver_semaphore = OpenSemaphore(
+        SEMAPHORE_ALL_ACCESS,   // Semaphore access setting
+        FALSE,                  // Child processes DON'T inherit
+        name);                  // Semaphore name
+
+    if (jobserver_semaphore == NULL)
+        return 0;
+
+    return 1;
+}
+
+/* Create new jobserver semaphore */
+int create_jobserver_semaphore(int tokens)
+{
+    sprintf(jobserver_semaphore_name, "gmake_semaphore_%d", _getpid());
+
+    jobserver_semaphore = CreateSemaphore(
+        NULL,                           // Use default security descriptor
+        tokens,                         // Initial count
+        tokens,                         // Maximum count
+        jobserver_semaphore_name);      // Semaphore name
+
+    if (jobserver_semaphore == NULL)
+        return 0;
+
+    return 1;
+}
+
+/* Close jobserver semaphore */
+void free_jobserver_semaphore()
+{
+    if (jobserver_semaphore != NULL)
+    {
+        CloseHandle(jobserver_semaphore);
+        jobserver_semaphore = NULL;
+    }
+}
+
+/* Decrement semaphore count */
+int acquire_jobserver_semaphore()
+{
+    DWORD dwEvent = WaitForSingleObject(
+        jobserver_semaphore,    // Handle to semaphore
+        0);                     // DON'T wait on semaphore
+
+    return (dwEvent == WAIT_OBJECT_0);
+}
+
+/* Increment semaphore count */
+int release_jobserver_semaphore()
+{
+    BOOL bResult = ReleaseSemaphore(
+        jobserver_semaphore,    // handle to semaphore
+        1,                      // increase count by one
+        NULL);                  // not interested in previous count
+
+    return (bResult);
+}
+
+int has_jobserver_semaphore()
+{
+    return (jobserver_semaphore != NULL);
+}
+
+char* get_jobserver_semaphore_name()
+{
+    return (jobserver_semaphore_name);
+}
+
+/* Wait for either the jobserver semaphore to become signalled or one of our
+ * child processes to terminate.
+ */
+int wait_for_semaphore_or_child_process()
+{
+    HANDLE handles[MAXIMUM_WAIT_OBJECTS];
+    DWORD dwHandleCount = 1;
+    DWORD dwEvent;
+    int i;
+
+    /* Add jobserver semaphore to first slot. */
+    handles[0] = jobserver_semaphore;
+
+    /* Build array of handles to wait for */
+    for (i = 0; i < proc_index; i++)
+    {
+        /* Don't wait on child processes that have already finished */
+        if (fake_exits_pending && proc_array[i]->exit_code)
+            continue;
+
+        handles[dwHandleCount++] = (HANDLE) proc_array[i]->pid;
+    }
+
+    dwEvent = WaitForMultipleObjects(
+        dwHandleCount,  // number of objects in array
+        handles,        // array of objects
+        FALSE,          // wait for any object
+        INFINITE);      // wait until object is signalled
+
+    switch(dwEvent)
+    {
+      case WAIT_FAILED:
+        return -1;
+
+      case WAIT_OBJECT_0:
+        /* Indicate that the semaphore was signalled */
+        return 1;
+
+      default:
+        /* Assume that one or more of the child processes terminated. */
+        return 0;
+    }
+}
+
+/*
+ * When a process has been waited for, adjust the wait state
+ * array so that we don't wait for it again
+ */
+static void
+process_adjust_wait_state(sub_process* pproc)
+{
+        int i;
+
+        if (!proc_index)
+                return;
+
+        for (i = 0; i < proc_index; i++)
+                if (proc_array[i]->pid == pproc->pid)
+                        break;
+
+        if (i < proc_index) {
+                proc_index--;
+                if (i != proc_index)
+                        memmove(&proc_array[i], &proc_array[i+1],
+                                (proc_index-i) * sizeof(sub_process*));
+                proc_array[proc_index] = NULL;
+        }
+}
+
+/*
+ * Waits for any of the registered child processes to finish.
+ */
+static sub_process *
+process_wait_for_any_private(int block, DWORD* pdwWaitStatus)
+{
+        HANDLE handles[MAXIMUM_WAIT_OBJECTS];
+        DWORD retval, which;
+        int i;
+
+        if (!proc_index)
+                return NULL;
+
+        /* build array of handles to wait for */
+        for (i = 0; i < proc_index; i++) {
+                handles[i] = (HANDLE) proc_array[i]->pid;
+
+                if (fake_exits_pending && proc_array[i]->exit_code)
+                        break;
+        }
+
+        /* wait for someone to exit */
+        if (!fake_exits_pending) {
+                retval = WaitForMultipleObjects(proc_index, handles, FALSE, (block ? INFINITE : 0));
+                which = retval - WAIT_OBJECT_0;
+        } else {
+                fake_exits_pending--;
+                retval = !WAIT_FAILED;
+                which = i;
+        }
+
+        /* If the pointer is not NULL, set the wait status result variable. */
+        if (pdwWaitStatus)
+            *pdwWaitStatus = retval;
+
+        /* return pointer to process */
+        if ((retval == WAIT_TIMEOUT) || (retval == WAIT_FAILED)) {
+                return NULL;
+        }
+        else {
+                sub_process* pproc = proc_array[which];
+                process_adjust_wait_state(pproc);
+                return pproc;
+        }
+}
+
+/*
+ * Terminate a process.
+ */
+BOOL
+process_kill(HANDLE proc, int signal)
+{
+        sub_process* pproc = (sub_process*) proc;
+        pproc->signal = signal;
+        return (TerminateProcess((HANDLE) pproc->pid, signal));
+}
+
+/*
+ * Use this function to register processes you wish to wait for by
+ * calling process_file_io(NULL) or process_wait_any(). This must be done
+ * because it is possible for callers of this library to reuse the same
+ * handle for multiple processes launches :-(
+ */
+void
+process_register(HANDLE proc)
+{
+        if (proc_index < MAXIMUM_WAIT_OBJECTS)
+                proc_array[proc_index++] = (sub_process *) proc;
+}
+
+/*
+ * Return the number of processes that we are still waiting for.
+ */
+int
+process_used_slots(void)
+{
+        return proc_index;
+}
+
+/*
+ * Public function which works kind of like waitpid(). Wait for any
+ * of the children to die and return results. To call this function,
+ * you must do 1 of things:
+ *
+ *      x = process_easy(...);
+ *
+ * or
+ *
+ *      x = process_init_fd();
+ *      process_register(x);
+ *
+ * or
+ *
+ *      x = process_init();
+ *      process_register(x);
+ *
+ * You must NOT then call process_pipe_io() because this function is
+ * not capable of handling automatic notification of any child
+ * death.
+ */
+
+HANDLE
+process_wait_for_any(int block, DWORD* pdwWaitStatus)
+{
+        sub_process* pproc = process_wait_for_any_private(block, pdwWaitStatus);
+
+        if (!pproc)
+                return NULL;
+        else {
+                /*
+                 * Ouch! can't tell caller if this fails directly. Caller
+                 * will have to use process_last_err()
+                 */
+                (void) process_file_io(pproc);
+                return ((HANDLE) pproc);
+        }
+}
+
+long
+process_signal(HANDLE proc)
+{
+        if (proc == INVALID_HANDLE_VALUE) return 0;
+        return (((sub_process *)proc)->signal);
+}
+
+long
+process_last_err(HANDLE proc)
+{
+        if (proc == INVALID_HANDLE_VALUE) return ERROR_INVALID_HANDLE;
+        return (((sub_process *)proc)->last_err);
+}
+
+long
+process_exit_code(HANDLE proc)
+{
+        if (proc == INVALID_HANDLE_VALUE) return EXIT_FAILURE;
+        return (((sub_process *)proc)->exit_code);
+}
+
+void
+process_noinherit(int fd)
+{
+  HANDLE fh = (HANDLE)_get_osfhandle(fd);
+
+  if (fh && fh != INVALID_HANDLE_VALUE)
+        SetHandleInformation(fh, HANDLE_FLAG_INHERIT, 0);
+}
+
+/*
+2006-02:
+All the following functions are currently unused.
+All of them would crash gmake if called with argument INVALID_HANDLE_VALUE.
+Hence whoever wants to use one of this functions must invent and implement
+a reasonable error handling for this function.
+
+char *
+process_outbuf(HANDLE proc)
+{
+        return (((sub_process *)proc)->outp);
+}
+
+char *
+process_errbuf(HANDLE proc)
+{
+        return (((sub_process *)proc)->errp);
+}
+
+int
+process_outcnt(HANDLE proc)
+{
+        return (((sub_process *)proc)->outcnt);
+}
+
+int
+process_errcnt(HANDLE proc)
+{
+        return (((sub_process *)proc)->errcnt);
+}
+
+void
+process_pipes(HANDLE proc, int pipes[3])
+{
+        pipes[0] = ((sub_process *)proc)->sv_stdin[0];
+        pipes[1] = ((sub_process *)proc)->sv_stdout[0];
+        pipes[2] = ((sub_process *)proc)->sv_stderr[0];
+        return;
+}
+*/
+
+        HANDLE
+process_init()
+{
+        sub_process *pproc;
+        /*
+         * open file descriptors for attaching stdin/stdout/sterr
+         */
+        HANDLE stdin_pipes[2];
+        HANDLE stdout_pipes[2];
+        HANDLE stderr_pipes[2];
+        SECURITY_ATTRIBUTES inherit;
+        BYTE sd[SECURITY_DESCRIPTOR_MIN_LENGTH];
+
+        pproc = malloc(sizeof(*pproc));
+        memset(pproc, 0, sizeof(*pproc));
+
+        /* We can't use NULL for lpSecurityDescriptor because that
+           uses the default security descriptor of the calling process.
+           Instead we use a security descriptor with no DACL.  This
+           allows nonrestricted access to the associated objects. */
+
+        if (!InitializeSecurityDescriptor((PSECURITY_DESCRIPTOR)(&sd),
+                                          SECURITY_DESCRIPTOR_REVISION)) {
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+                return((HANDLE)pproc);
+        }
+
+        inherit.nLength = sizeof(inherit);
+        inherit.lpSecurityDescriptor = (PSECURITY_DESCRIPTOR)(&sd);
+        inherit.bInheritHandle = TRUE;
+
+        // By convention, parent gets pipe[0], and child gets pipe[1]
+        // This means the READ side of stdin pipe goes into pipe[1]
+        // and the WRITE side of the stdout and stderr pipes go into pipe[1]
+        if (CreatePipe( &stdin_pipes[1], &stdin_pipes[0], &inherit, 0) == FALSE ||
+        CreatePipe( &stdout_pipes[0], &stdout_pipes[1], &inherit, 0) == FALSE ||
+        CreatePipe( &stderr_pipes[0], &stderr_pipes[1], &inherit, 0) == FALSE) {
+
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+                return((HANDLE)pproc);
+        }
+
+        //
+        // Mark the parent sides of the pipes as non-inheritable
+        //
+        if (SetHandleInformation(stdin_pipes[0],
+                                HANDLE_FLAG_INHERIT, 0) == FALSE ||
+                SetHandleInformation(stdout_pipes[0],
+                                HANDLE_FLAG_INHERIT, 0) == FALSE ||
+                SetHandleInformation(stderr_pipes[0],
+                                HANDLE_FLAG_INHERIT, 0) == FALSE) {
+
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+                return((HANDLE)pproc);
+        }
+        pproc->sv_stdin[0]  = (intptr_t) stdin_pipes[0];
+        pproc->sv_stdin[1]  = (intptr_t) stdin_pipes[1];
+        pproc->sv_stdout[0] = (intptr_t) stdout_pipes[0];
+        pproc->sv_stdout[1] = (intptr_t) stdout_pipes[1];
+        pproc->sv_stderr[0] = (intptr_t) stderr_pipes[0];
+        pproc->sv_stderr[1] = (intptr_t) stderr_pipes[1];
+
+        pproc->using_pipes = 1;
+
+        pproc->lerrno = 0;
+
+        return((HANDLE)pproc);
+}
+
+
+        HANDLE
+process_init_fd(HANDLE stdinh, HANDLE stdouth, HANDLE stderrh)
+{
+        sub_process *pproc;
+
+        pproc = malloc(sizeof(*pproc));
+        if (pproc) {
+                memset(pproc, 0, sizeof(*pproc));
+
+                /*
+                 * Just pass the provided file handles to the 'child
+                 * side' of the pipe, bypassing pipes altogether.
+                 */
+                pproc->sv_stdin[1]  = (intptr_t) stdinh;
+                pproc->sv_stdout[1] = (intptr_t) stdouth;
+                pproc->sv_stderr[1] = (intptr_t) stderrh;
+
+                pproc->last_err = pproc->lerrno = 0;
+        }
+
+        return((HANDLE)pproc);
+}
+
+
+static HANDLE
+find_file(const char *exec_path, const char *path_var,
+          char *full_fname, DWORD full_len)
+{
+        HANDLE exec_handle;
+        char *fname;
+        char *ext;
+        DWORD req_len;
+        int i;
+        static const char *extensions[] =
+          /* Should .com come before no-extension case?  */
+          { ".exe", ".cmd", ".bat", "", ".com", NULL };
+
+        fname = xmalloc(strlen(exec_path) + 5);
+        strcpy(fname, exec_path);
+        ext = fname + strlen(fname);
+
+        for (i = 0; extensions[i]; i++) {
+                strcpy(ext, extensions[i]);
+                if (((req_len = SearchPath (path_var, fname, NULL, full_len,
+                                            full_fname, NULL)) > 0
+                     /* For compatibility with previous code, which
+                        used OpenFile, and with Windows operation in
+                        general, also look in various default
+                        locations, such as Windows directory and
+                        Windows System directory.  Warning: this also
+                        searches PATH in the Make's environment, which
+                        might not be what the Makefile wants, but it
+                        seems to be OK as a fallback, after the
+                        previous SearchPath failed to find on child's
+                        PATH.  */
+                     || (req_len = SearchPath (NULL, fname, NULL, full_len,
+                                               full_fname, NULL)) > 0)
+                    && req_len <= full_len
+                    && (exec_handle =
+                                CreateFile(full_fname,
+                                           GENERIC_READ,
+                                           FILE_SHARE_READ | FILE_SHARE_WRITE,
+                                           NULL,
+                                           OPEN_EXISTING,
+                                           FILE_ATTRIBUTE_NORMAL,
+                                           NULL)) != INVALID_HANDLE_VALUE) {
+                        free(fname);
+                        return(exec_handle);
+                }
+        }
+
+        free(fname);
+        return INVALID_HANDLE_VALUE;
+}
+
+/*
+ * Return non-zero of FNAME specifies a batch file and its name
+ * includes embedded whitespace.
+ */
+
+static int
+batch_file_with_spaces(const char *fname)
+{
+        size_t fnlen = strlen(fname);
+
+        return (fnlen > 4
+                && (_strnicmp(fname + fnlen - 4, ".bat", 4) == 0
+                    || _strnicmp(fname + fnlen - 4, ".cmd", 4) == 0)
+                /* The set of characters in the 2nd arg to strpbrk
+                   should be the same one used by make_command_line
+                   below to decide whether an argv[] element needs
+                   quoting.  */
+                && strpbrk(fname, " \t") != NULL);
+}
+
+
+/*
+ * Description:   Create the child process to be helped
+ *
+ * Returns: success <=> 0
+ *
+ * Notes/Dependencies:
+ */
+long
+process_begin(
+        HANDLE proc,
+        char **argv,
+        char **envp,
+        char *exec_path,
+        char *as_user)
+{
+        sub_process *pproc = (sub_process *)proc;
+        char *shell_name = 0;
+        int file_not_found=0;
+        HANDLE exec_handle;
+        char exec_fname[MAX_PATH];
+        const char *path_var = NULL;
+        char **ep;
+        char buf[MAX_PATH];
+        DWORD bytes_returned;
+        DWORD flags;
+        char *command_line;
+        STARTUPINFO startInfo;
+        PROCESS_INFORMATION procInfo;
+        char *envblk=NULL;
+        int envsize_needed = 0;
+        int pass_null_exec_path = 0;
+
+        /*
+         *  Shell script detection...  if the exec_path starts with #! then
+         *  we want to exec shell-script-name exec-path, not just exec-path
+         *  NT doesn't recognize #!/bin/sh or #!/etc/Tivoli/bin/perl.  We do not
+         *  hard-code the path to the shell or perl or whatever:  Instead, we
+         *  assume it's in the path somewhere (generally, the NT tools
+         *  bin directory)
+         */
+
+        /* Use the Makefile's value of PATH to look for the program to
+           execute, because it could be different from Make's PATH
+           (e.g., if the target sets its own value.  */
+        if (envp)
+                for (ep = envp; *ep; ep++) {
+                        if (strncmp (*ep, "PATH=", 5) == 0
+                            || strncmp (*ep, "Path=", 5) == 0) {
+                                path_var = *ep + 5;
+                                break;
+                        }
+                }
+        exec_handle = find_file(exec_path, path_var,
+                                exec_fname, sizeof(exec_fname));
+
+        /*
+         * If we couldn't open the file, just assume that Windows will be
+         * somehow able to find and execute it.  If the first character
+         * of the command is '/', assume they set SHELL to a Unixy shell
+         * that have some magic mounts known only to it, and run the whole
+         * command via $SHELL -c "COMMAND" instead.
+         */
+        if (exec_handle == INVALID_HANDLE_VALUE) {
+                if (exec_path[0] == '/') {
+                        char *new_argv0;
+                        char **argvi = argv;
+                        int arglen = 0;
+
+                        strcpy(buf, variable_expand ("$(SHELL)"));
+                        shell_name = &buf[0];
+                        strcpy(exec_fname, "-c");
+                        /* Construct a single command string in argv[0].  */
+                        while (*argvi) {
+                                arglen += strlen(*argvi) + 1;
+                                argvi++;
+                        }
+                        new_argv0 = xmalloc(arglen + 1);
+                        new_argv0[0] = '\0';
+                        for (argvi = argv; *argvi; argvi++) {
+                                strcat(new_argv0, *argvi);
+                                strcat(new_argv0, " ");
+                        }
+                        /* Remove the extra blank at the end.  */
+                        new_argv0[arglen-1] = '\0';
+                        free(argv[0]);
+                        argv[0] = new_argv0;
+                        argv[1] = NULL;
+                }
+                else
+                        file_not_found++;
+        }
+        else {
+                /* Attempt to read the first line of the file */
+                if (ReadFile( exec_handle,
+                                buf, sizeof(buf) - 1, /* leave room for trailing NULL */
+                                &bytes_returned, 0) == FALSE || bytes_returned < 2) {
+
+                        pproc->last_err = GetLastError();
+                        pproc->lerrno = E_IO;
+                        CloseHandle(exec_handle);
+                        return(-1);
+                }
+                if (buf[0] == '#' && buf[1] == '!') {
+                        /*
+                         *  This is a shell script...  Change the command line from
+                         *      exec_path args to shell_name exec_path args
+                         */
+                        char *p;
+
+                        /*  Make sure buf is NULL terminated */
+                        buf[bytes_returned] = 0;
+                        /*
+                         * Depending on the file system type, etc. the first line
+                         * of the shell script may end with newline or newline-carriage-return
+                         * Whatever it ends with, cut it off.
+                         */
+                        p= strchr(buf, '\n');
+                        if (p)
+                                *p = 0;
+                        p = strchr(buf, '\r');
+                        if (p)
+                                *p = 0;
+
+                        /*
+                         *  Find base name of shell
+                         */
+                        shell_name = strrchr( buf, '/');
+                        if (shell_name) {
+                                shell_name++;
+                        } else {
+                                shell_name = &buf[2];/* skipping "#!" */
+                        }
+
+                }
+                CloseHandle(exec_handle);
+        }
+
+        flags = 0;
+
+        if (file_not_found)
+                command_line = make_command_line( shell_name, exec_path, argv);
+        else {
+                /* If exec_fname includes whitespace, CreateProcess
+                   behaves erratically and unreliably, and often fails
+                   if argv[0] also includes whitespace (and thus will
+                   be quoted by make_command_line below).  So in that
+                   case, we don't pass exec_fname as the 1st arg to
+                   CreateProcess, but instead replace argv[0] with
+                   exec_fname (to keep its leading directories and
+                   extension as found by find_file), and pass NULL to
+                   CreateProcess as its 1st arg.  This works around
+                   the bugs in CreateProcess, which are probably
+                   caused by its passing the command to cmd.exe with
+                   some incorrect quoting.  */
+                if (!shell_name
+                    && batch_file_with_spaces(exec_fname)
+                    && _stricmp(exec_path, argv[0]) == 0) {
+                        pass_null_exec_path = 1;
+                        free (argv[0]);
+                        argv[0] = xstrdup(exec_fname);
+                }
+                command_line = make_command_line( shell_name, exec_fname, argv);
+        }
+
+        if ( command_line == NULL ) {
+                pproc->last_err = 0;
+                pproc->lerrno = E_NO_MEM;
+                return(-1);
+        }
+
+        if (envp) {
+                if (arr2envblk(envp, &envblk, &envsize_needed) == FALSE) {
+                        pproc->last_err = 0;
+                        pproc->lerrno = E_NO_MEM;
+                        free( command_line );
+                        if (pproc->last_err == ERROR_INVALID_PARAMETER
+                            && envsize_needed > 32*1024) {
+                                fprintf (stderr, "CreateProcess failed, probably because environment is too large (%d bytes).\n",
+                                         envsize_needed);
+                        }
+                        return(-1);
+                }
+        }
+
+        if (shell_name || file_not_found || pass_null_exec_path) {
+                exec_path = 0;  /* Search for the program in %Path% */
+        } else {
+                exec_path = exec_fname;
+        }
+
+        /*
+         *  Set up inherited stdin, stdout, stderr for child
+         */
+        GetStartupInfo(&startInfo);
+        startInfo.dwFlags = STARTF_USESTDHANDLES;
+        startInfo.lpReserved = 0;
+        startInfo.cbReserved2 = 0;
+        startInfo.lpReserved2 = 0;
+        startInfo.hStdInput = (HANDLE)pproc->sv_stdin[1];
+        startInfo.hStdOutput = (HANDLE)pproc->sv_stdout[1];
+        startInfo.hStdError = (HANDLE)pproc->sv_stderr[1];
+
+        if (as_user) {
+                free(envblk);
+                return -1;
+        } else {
+                DB (DB_JOBS, ("CreateProcess(%s,%s,...)\n",
+                        exec_path ? exec_path : "NULL",
+                        command_line ? command_line : "NULL"));
+                if (CreateProcess(
+                        exec_path,
+                        command_line,
+                        NULL,
+                        0, /* default security attributes for thread */
+                        TRUE, /* inherit handles (e.g. helper pipes, oserv socket) */
+                        flags,
+                        envblk,
+                        0, /* default starting directory */
+                        &startInfo,
+                        &procInfo) == FALSE) {
+
+                        pproc->last_err = GetLastError();
+                        pproc->lerrno = E_FORK;
+                        fprintf(stderr, "process_begin: CreateProcess(%s, %s, ...) failed.\n",
+                                exec_path ? exec_path : "NULL", command_line);
+                        free(envblk);
+                        free( command_line );
+                        return(-1);
+                }
+        }
+
+        pproc->pid = (pid_t)procInfo.hProcess;
+        /* Close the thread handle -- we'll just watch the process */
+        CloseHandle(procInfo.hThread);
+
+        /* Close the halves of the pipes we don't need */
+        if ((HANDLE)pproc->sv_stdin[1] != INVALID_HANDLE_VALUE)
+          CloseHandle((HANDLE)pproc->sv_stdin[1]);
+        if ((HANDLE)pproc->sv_stdout[1] != INVALID_HANDLE_VALUE)
+          CloseHandle((HANDLE)pproc->sv_stdout[1]);
+        if ((HANDLE)pproc->sv_stderr[1] != INVALID_HANDLE_VALUE)
+          CloseHandle((HANDLE)pproc->sv_stderr[1]);
+        pproc->sv_stdin[1] = 0;
+        pproc->sv_stdout[1] = 0;
+        pproc->sv_stderr[1] = 0;
+
+        free( command_line );
+        free(envblk);
+        pproc->lerrno=0;
+        return 0;
+}
+
+
+
+#if 0   /* unused */
+static DWORD
+proc_stdin_thread(sub_process *pproc)
+{
+        DWORD in_done;
+        for (;;) {
+                if (WriteFile( (HANDLE) pproc->sv_stdin[0], pproc->inp, pproc->incnt,
+                                         &in_done, NULL) == FALSE)
+                        _endthreadex(0);
+                // This if should never be true for anonymous pipes, but gives
+                // us a chance to change I/O mechanisms later
+                if (in_done < pproc->incnt) {
+                        pproc->incnt -= in_done;
+                        pproc->inp += in_done;
+                } else {
+                        _endthreadex(0);
+                }
+        }
+        return 0; // for compiler warnings only.. not reached
+}
+
+static DWORD
+proc_stdout_thread(sub_process *pproc)
+{
+        DWORD bufsize = 1024;
+        char c;
+        DWORD nread;
+        pproc->outp = malloc(bufsize);
+        if (pproc->outp == NULL)
+                _endthreadex(0);
+        pproc->outcnt = 0;
+
+        for (;;) {
+                if (ReadFile( (HANDLE)pproc->sv_stdout[0], &c, 1, &nread, NULL)
+                                        == FALSE) {
+/*                      map_windows32_error_to_string(GetLastError());*/
+                        _endthreadex(0);
+                }
+                if (nread == 0)
+                        _endthreadex(0);
+                if (pproc->outcnt + nread > bufsize) {
+                        bufsize += nread + 512;
+                        pproc->outp = realloc(pproc->outp, bufsize);
+                        if (pproc->outp == NULL) {
+                                pproc->outcnt = 0;
+                                _endthreadex(0);
+                        }
+                }
+                pproc->outp[pproc->outcnt++] = c;
+        }
+        return 0;
+}
+
+static DWORD
+proc_stderr_thread(sub_process *pproc)
+{
+        DWORD bufsize = 1024;
+        char c;
+        DWORD nread;
+        pproc->errp = malloc(bufsize);
+        if (pproc->errp == NULL)
+                _endthreadex(0);
+        pproc->errcnt = 0;
+
+        for (;;) {
+                if (ReadFile( (HANDLE)pproc->sv_stderr[0], &c, 1, &nread, NULL) == FALSE) {
+                        map_windows32_error_to_string(GetLastError());
+                        _endthreadex(0);
+                }
+                if (nread == 0)
+                        _endthreadex(0);
+                if (pproc->errcnt + nread > bufsize) {
+                        bufsize += nread + 512;
+                        pproc->errp = realloc(pproc->errp, bufsize);
+                        if (pproc->errp == NULL) {
+                                pproc->errcnt = 0;
+                                _endthreadex(0);
+                        }
+                }
+                pproc->errp[pproc->errcnt++] = c;
+        }
+        return 0;
+}
+
+
+/*
+ * Purpose: collects output from child process and returns results
+ *
+ * Description:
+ *
+ * Returns:
+ *
+ * Notes/Dependencies:
+ */
+        long
+process_pipe_io(
+        HANDLE proc,
+        char *stdin_data,
+        int stdin_data_len)
+{
+        sub_process *pproc = (sub_process *)proc;
+        bool_t stdin_eof = FALSE, stdout_eof = FALSE, stderr_eof = FALSE;
+        HANDLE childhand = (HANDLE) pproc->pid;
+        HANDLE tStdin = NULL, tStdout = NULL, tStderr = NULL;
+        unsigned int dwStdin, dwStdout, dwStderr;
+        HANDLE wait_list[4];
+        DWORD wait_count;
+        DWORD wait_return;
+        HANDLE ready_hand;
+        bool_t child_dead = FALSE;
+        BOOL GetExitCodeResult;
+
+        /*
+         *  Create stdin thread, if needed
+         */
+        pproc->inp = stdin_data;
+        pproc->incnt = stdin_data_len;
+        if (!pproc->inp) {
+                stdin_eof = TRUE;
+                CloseHandle((HANDLE)pproc->sv_stdin[0]);
+                pproc->sv_stdin[0] = 0;
+        } else {
+                tStdin = (HANDLE) _beginthreadex( 0, 1024,
+                        (unsigned (__stdcall *) (void *))proc_stdin_thread,
+                                                  pproc, 0, &dwStdin);
+                if (tStdin == 0) {
+                        pproc->last_err = GetLastError();
+                        pproc->lerrno = E_SCALL;
+                        goto done;
+                }
+        }
+
+        /*
+         *   Assume child will produce stdout and stderr
+         */
+        tStdout = (HANDLE) _beginthreadex( 0, 1024,
+                (unsigned (__stdcall *) (void *))proc_stdout_thread, pproc, 0,
+                &dwStdout);
+        tStderr = (HANDLE) _beginthreadex( 0, 1024,
+                (unsigned (__stdcall *) (void *))proc_stderr_thread, pproc, 0,
+                &dwStderr);
+
+        if (tStdout == 0 || tStderr == 0) {
+
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+                goto done;
+        }
+
+
+        /*
+         *  Wait for all I/O to finish and for the child process to exit
+         */
+
+        while (!stdin_eof || !stdout_eof || !stderr_eof || !child_dead) {
+                wait_count = 0;
+                if (!stdin_eof) {
+                        wait_list[wait_count++] = tStdin;
+                }
+                if (!stdout_eof) {
+                        wait_list[wait_count++] = tStdout;
+                }
+                if (!stderr_eof) {
+                        wait_list[wait_count++] = tStderr;
+                }
+                if (!child_dead) {
+                        wait_list[wait_count++] = childhand;
+                }
+
+                wait_return = WaitForMultipleObjects(wait_count, wait_list,
+                         FALSE, /* don't wait for all: one ready will do */
+                         child_dead? 1000 :INFINITE); /* after the child dies, subthreads have
+                                one second to collect all remaining output */
+
+                if (wait_return == WAIT_FAILED) {
+/*                      map_windows32_error_to_string(GetLastError());*/
+                        pproc->last_err = GetLastError();
+                        pproc->lerrno = E_SCALL;
+                        goto done;
+                }
+
+                ready_hand = wait_list[wait_return - WAIT_OBJECT_0];
+
+                if (ready_hand == tStdin) {
+                        CloseHandle((HANDLE)pproc->sv_stdin[0]);
+                        pproc->sv_stdin[0] = 0;
+                        CloseHandle(tStdin);
+                        tStdin = 0;
+                        stdin_eof = TRUE;
+
+                } else if (ready_hand == tStdout) {
+
+                        CloseHandle((HANDLE)pproc->sv_stdout[0]);
+                        pproc->sv_stdout[0] = 0;
+                        CloseHandle(tStdout);
+                        tStdout = 0;
+                        stdout_eof = TRUE;
+
+                } else if (ready_hand == tStderr) {
+
+                        CloseHandle((HANDLE)pproc->sv_stderr[0]);
+                        pproc->sv_stderr[0] = 0;
+                        CloseHandle(tStderr);
+                        tStderr = 0;
+                        stderr_eof = TRUE;
+
+                } else if (ready_hand == childhand) {
+
+                        DWORD ierr;
+                        GetExitCodeResult = GetExitCodeProcess(childhand, &ierr);
+                        if (ierr == CONTROL_C_EXIT) {
+                                pproc->signal = SIGINT;
+                        } else {
+                                pproc->exit_code = ierr;
+                        }
+                        if (GetExitCodeResult == FALSE) {
+                                pproc->last_err = GetLastError();
+                                pproc->lerrno = E_SCALL;
+                                goto done;
+                        }
+                        child_dead = TRUE;
+
+                } else {
+
+                        /* ?? Got back a handle we didn't query ?? */
+                        pproc->last_err = 0;
+                        pproc->lerrno = E_FAIL;
+                        goto done;
+                }
+        }
+
+ done:
+        if (tStdin != 0)
+                CloseHandle(tStdin);
+        if (tStdout != 0)
+                CloseHandle(tStdout);
+        if (tStderr != 0)
+                CloseHandle(tStderr);
+
+        if (pproc->lerrno)
+                return(-1);
+        else
+                return(0);
+
+}
+#endif  /* unused */
+
+/*
+ * Purpose: collects output from child process and returns results
+ *
+ * Description:
+ *
+ * Returns:
+ *
+ * Notes/Dependencies:
+ */
+        long
+process_file_io(
+        HANDLE proc)
+{
+        sub_process *pproc;
+        HANDLE childhand;
+        DWORD wait_return;
+        BOOL GetExitCodeResult;
+        DWORD ierr;
+
+        if (proc == NULL)
+                pproc = process_wait_for_any_private(1, 0);
+        else
+                pproc = (sub_process *)proc;
+
+        /* some sort of internal error */
+        if (!pproc)
+                return -1;
+
+        childhand = (HANDLE) pproc->pid;
+
+        /*
+         * This function is poorly named, and could also be used just to wait
+         * for child death if you're doing your own pipe I/O.  If that is
+         * the case, close the pipe handles here.
+         */
+        if (pproc->sv_stdin[0]) {
+                CloseHandle((HANDLE)pproc->sv_stdin[0]);
+                pproc->sv_stdin[0] = 0;
+        }
+        if (pproc->sv_stdout[0]) {
+                CloseHandle((HANDLE)pproc->sv_stdout[0]);
+                pproc->sv_stdout[0] = 0;
+        }
+        if (pproc->sv_stderr[0]) {
+                CloseHandle((HANDLE)pproc->sv_stderr[0]);
+                pproc->sv_stderr[0] = 0;
+        }
+
+        /*
+         *  Wait for the child process to exit
+         */
+
+        wait_return = WaitForSingleObject(childhand, INFINITE);
+
+        if (wait_return != WAIT_OBJECT_0) {
+/*              map_windows32_error_to_string(GetLastError());*/
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+                goto done2;
+        }
+
+        GetExitCodeResult = GetExitCodeProcess(childhand, &ierr);
+        if (ierr == CONTROL_C_EXIT) {
+                pproc->signal = SIGINT;
+        } else {
+                pproc->exit_code = ierr;
+        }
+        if (GetExitCodeResult == FALSE) {
+                pproc->last_err = GetLastError();
+                pproc->lerrno = E_SCALL;
+        }
+
+done2:
+        if (pproc->lerrno)
+                return(-1);
+        else
+                return(0);
+
+}
+
+/*
+ * Description:  Clean up any leftover handles, etc.  It is up to the
+ * caller to manage and free the input, output, and stderr buffers.
+ */
+        void
+process_cleanup(
+        HANDLE proc)
+{
+        sub_process *pproc = (sub_process *)proc;
+        int i;
+
+        if (pproc->using_pipes) {
+                for (i= 0; i <= 1; i++) {
+                        if ((HANDLE)pproc->sv_stdin[i]
+                            && (HANDLE)pproc->sv_stdin[i] != INVALID_HANDLE_VALUE)
+                                CloseHandle((HANDLE)pproc->sv_stdin[i]);
+                        if ((HANDLE)pproc->sv_stdout[i]
+                            && (HANDLE)pproc->sv_stdout[i] != INVALID_HANDLE_VALUE)
+                                CloseHandle((HANDLE)pproc->sv_stdout[i]);
+                        if ((HANDLE)pproc->sv_stderr[i]
+                            && (HANDLE)pproc->sv_stderr[i] != INVALID_HANDLE_VALUE)
+                                CloseHandle((HANDLE)pproc->sv_stderr[i]);
+                }
+        }
+        if ((HANDLE)pproc->pid)
+                CloseHandle((HANDLE)pproc->pid);
+
+        free(pproc);
+}
+
+
+/*
+ * Description:
+ *       Create a command line buffer to pass to CreateProcess
+ *
+ * Returns:  the buffer or NULL for failure
+ *      Shell case:  sh_name a:/full/path/to/script argv[1] argv[2] ...
+ *  Otherwise:   argv[0] argv[1] argv[2] ...
+ *
+ * Notes/Dependencies:
+ *   CreateProcess does not take an argv, so this command creates a
+ *   command line for the executable.
+ */
+
+static char *
+make_command_line( char *shell_name, char *full_exec_path, char **argv)
+{
+        int             argc = 0;
+        char**          argvi;
+        int*            enclose_in_quotes = NULL;
+        int*            enclose_in_quotes_i;
+        unsigned int    bytes_required = 0;
+        char*           command_line;
+        char*           command_line_i;
+        int  cygwin_mode = 0; /* HAVE_CYGWIN_SHELL */
+        int have_sh = 0; /* HAVE_CYGWIN_SHELL */
+
+#ifdef HAVE_CYGWIN_SHELL
+        have_sh = (shell_name != NULL || strstr(full_exec_path, "sh.exe"));
+        cygwin_mode = 1;
+#endif
+
+        if (shell_name && full_exec_path) {
+                bytes_required
+                  = strlen(shell_name) + 1 + strlen(full_exec_path);
+                /*
+                 * Skip argv[0] if any, when shell_name is given.
+                 * The special case of "-c" in full_exec_path means
+                 * argv[0] is not the shell name, but the command string
+                 * to pass to the shell.
+                 */
+                if (*argv && strcmp(full_exec_path, "-c")) argv++;
+                /*
+                 * Add one for the intervening space.
+                 */
+                if (*argv) bytes_required++;
+        }
+
+        argvi = argv;
+        while (*(argvi++)) argc++;
+
+        if (argc) {
+                enclose_in_quotes = (int*) calloc(1, argc * sizeof(int));
+
+                if (!enclose_in_quotes) {
+                        return NULL;
+                }
+        }
+
+        /* We have to make one pass through each argv[i] to see if we need
+         * to enclose it in ", so we might as well figure out how much
+         * memory we'll need on the same pass.
+         */
+
+        argvi = argv;
+        enclose_in_quotes_i = enclose_in_quotes;
+        while(*argvi) {
+                char* p = *argvi;
+                unsigned int backslash_count = 0;
+
+                /*
+                 * We have to enclose empty arguments in ".
+                 */
+                if (!(*p)) *enclose_in_quotes_i = 1;
+
+                while(*p) {
+                        switch (*p) {
+                        case '\"':
+                                /*
+                                 * We have to insert a backslash for each "
+                                 * and each \ that precedes the ".
+                                 */
+                                bytes_required += (backslash_count + 1);
+                                backslash_count = 0;
+                                break;
+
+#if !defined(HAVE_MKS_SHELL) && !defined(HAVE_CYGWIN_SHELL)
+                        case '\\':
+                                backslash_count++;
+                                break;
+#endif
+        /*
+         * At one time we set *enclose_in_quotes_i for '*' or '?' to suppress
+         * wildcard expansion in programs linked with MSVC's SETARGV.OBJ so
+         * that argv in always equals argv out. This was removed.  Say you have
+         * such a program named glob.exe.  You enter
+         * glob '*'
+         * at the sh command prompt.  Obviously the intent is to make glob do the
+         * wildcarding instead of sh.  If we set *enclose_in_quotes_i for '*' or '?',
+         * then the command line that glob would see would be
+         * glob "*"
+         * and the _setargv in SETARGV.OBJ would _not_ expand the *.
+         */
+                        case ' ':
+                        case '\t':
+                                *enclose_in_quotes_i = 1;
+                                /* fall through */
+
+                        default:
+                                backslash_count = 0;
+                                break;
+                        }
+
+                        /*
+                         * Add one for each character in argv[i].
+                         */
+                        bytes_required++;
+
+                        p++;
+                }
+
+                if (*enclose_in_quotes_i) {
+                        /*
+                         * Add one for each enclosing ",
+                         * and one for each \ that precedes the
+                         * closing ".
+                         */
+                        bytes_required += (backslash_count + 2);
+                }
+
+                /*
+                 * Add one for the intervening space.
+                 */
+                if (*(++argvi)) bytes_required++;
+                enclose_in_quotes_i++;
+        }
+
+        /*
+         * Add one for the terminating NULL.
+         */
+        bytes_required++;
+
+        command_line = (char*) malloc(bytes_required);
+
+        if (!command_line) {
+                free(enclose_in_quotes);
+                return NULL;
+        }
+
+        command_line_i = command_line;
+
+        if (shell_name && full_exec_path) {
+                while(*shell_name) {
+                        *(command_line_i++) = *(shell_name++);
+                }
+
+                *(command_line_i++) = ' ';
+
+                while(*full_exec_path) {
+                        *(command_line_i++) = *(full_exec_path++);
+                }
+
+                if (*argv) {
+                        *(command_line_i++) = ' ';
+                }
+        }
+
+        argvi = argv;
+        enclose_in_quotes_i = enclose_in_quotes;
+
+        while(*argvi) {
+                char* p = *argvi;
+                unsigned int backslash_count = 0;
+
+                if (*enclose_in_quotes_i) {
+                        *(command_line_i++) = '\"';
+                }
+
+                while(*p) {
+                        if (*p == '\"') {
+                                if (cygwin_mode && have_sh) { /* HAVE_CYGWIN_SHELL */
+                                        /* instead of a \", cygwin likes "" */
+                                        *(command_line_i++) = '\"';
+                                } else {
+
+                                /*
+                                 * We have to insert a backslash for the "
+                                 * and each \ that precedes the ".
+                                 */
+                                backslash_count++;
+
+                                while(backslash_count) {
+                                        *(command_line_i++) = '\\';
+                                        backslash_count--;
+                                };
+                                }
+#if !defined(HAVE_MKS_SHELL) && !defined(HAVE_CYGWIN_SHELL)
+                        } else if (*p == '\\') {
+                                backslash_count++;
+                        } else {
+                                backslash_count = 0;
+#endif
+                        }
+
+                        /*
+                         * Copy the character.
+                         */
+                        *(command_line_i++) = *(p++);
+                }
+
+                if (*enclose_in_quotes_i) {
+#if !defined(HAVE_MKS_SHELL) && !defined(HAVE_CYGWIN_SHELL)
+                        /*
+                         * Add one \ for each \ that precedes the
+                         * closing ".
+                         */
+                        while(backslash_count--) {
+                                *(command_line_i++) = '\\';
+                        };
+#endif
+                        *(command_line_i++) = '\"';
+                }
+
+                /*
+                 * Append an intervening space.
+                 */
+                if (*(++argvi)) {
+                        *(command_line_i++) = ' ';
+                }
+
+                enclose_in_quotes_i++;
+        }
+
+        /*
+         * Append the terminating NULL.
+         */
+        *command_line_i = '\0';
+
+        free(enclose_in_quotes);
+        return command_line;
+}
+
+/*
+ * Description: Given an argv and optional envp, launch the process
+ *              using the default stdin, stdout, and stderr handles.
+ *              Also, register process so that process_wait_for_any_private()
+ *              can be used via process_file_io(NULL) or
+ *              process_wait_for_any().
+ *
+ * Returns:
+ *
+ * Notes/Dependencies:
+ */
+HANDLE
+process_easy(
+        char **argv,
+        char **envp,
+        int outfd,
+        int errfd)
+{
+  HANDLE hIn = INVALID_HANDLE_VALUE;
+  HANDLE hOut = INVALID_HANDLE_VALUE;
+  HANDLE hErr = INVALID_HANDLE_VALUE;
+  HANDLE hProcess, tmpIn, tmpOut, tmpErr;
+  DWORD e;
+
+  if (proc_index >= MAXIMUM_WAIT_OBJECTS) {
+        DB (DB_JOBS, ("process_easy: All process slots used up\n"));
+        return INVALID_HANDLE_VALUE;
+  }
+  /* Standard handles returned by GetStdHandle can be NULL or
+     INVALID_HANDLE_VALUE if the parent process closed them.  If that
+     happens, we open the null device and pass its handle to
+     CreateProcess as the corresponding handle to inherit.  */
+  tmpIn = GetStdHandle(STD_INPUT_HANDLE);
+  if (DuplicateHandle(GetCurrentProcess(),
+                      tmpIn,
+                      GetCurrentProcess(),
+                      &hIn,
+                      0,
+                      TRUE,
+                      DUPLICATE_SAME_ACCESS) == FALSE) {
+    if ((e = GetLastError()) == ERROR_INVALID_HANDLE) {
+      tmpIn = CreateFile("NUL", GENERIC_READ,
+                         FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
+                         OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+      if (tmpIn != INVALID_HANDLE_VALUE
+          && DuplicateHandle(GetCurrentProcess(),
+                             tmpIn,
+                             GetCurrentProcess(),
+                             &hIn,
+                             0,
+                             TRUE,
+                             DUPLICATE_SAME_ACCESS) == FALSE)
+        CloseHandle(tmpIn);
+    }
+    if (hIn == INVALID_HANDLE_VALUE) {
+      fprintf(stderr, "process_easy: DuplicateHandle(In) failed (e=%ld)\n", e);
+      return INVALID_HANDLE_VALUE;
+    }
+  }
+  if (outfd >= 0)
+    tmpOut = (HANDLE)_get_osfhandle (outfd);
+  else
+    tmpOut = GetStdHandle (STD_OUTPUT_HANDLE);
+  if (DuplicateHandle(GetCurrentProcess(),
+                      tmpOut,
+                      GetCurrentProcess(),
+                      &hOut,
+                      0,
+                      TRUE,
+                      DUPLICATE_SAME_ACCESS) == FALSE) {
+    if ((e = GetLastError()) == ERROR_INVALID_HANDLE) {
+      tmpOut = CreateFile("NUL", GENERIC_WRITE,
+                          FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
+                          OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+      if (tmpOut != INVALID_HANDLE_VALUE
+          && DuplicateHandle(GetCurrentProcess(),
+                             tmpOut,
+                             GetCurrentProcess(),
+                             &hOut,
+                             0,
+                             TRUE,
+                             DUPLICATE_SAME_ACCESS) == FALSE)
+        CloseHandle(tmpOut);
+    }
+    if (hOut == INVALID_HANDLE_VALUE) {
+      fprintf(stderr, "process_easy: DuplicateHandle(Out) failed (e=%ld)\n", e);
+      return INVALID_HANDLE_VALUE;
+    }
+  }
+  if (errfd >= 0)
+    tmpErr = (HANDLE)_get_osfhandle (errfd);
+  else
+    tmpErr = GetStdHandle(STD_ERROR_HANDLE);
+  if (DuplicateHandle(GetCurrentProcess(),
+                      tmpErr,
+                      GetCurrentProcess(),
+                      &hErr,
+                      0,
+                      TRUE,
+                      DUPLICATE_SAME_ACCESS) == FALSE) {
+    if ((e = GetLastError()) == ERROR_INVALID_HANDLE) {
+      tmpErr = CreateFile("NUL", GENERIC_WRITE,
+                          FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
+                          OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+      if (tmpErr != INVALID_HANDLE_VALUE
+          && DuplicateHandle(GetCurrentProcess(),
+                             tmpErr,
+                             GetCurrentProcess(),
+                             &hErr,
+                             0,
+                             TRUE,
+                             DUPLICATE_SAME_ACCESS) == FALSE)
+        CloseHandle(tmpErr);
+    }
+    if (hErr == INVALID_HANDLE_VALUE) {
+      fprintf(stderr, "process_easy: DuplicateHandle(Err) failed (e=%ld)\n", e);
+      return INVALID_HANDLE_VALUE;
+    }
+  }
+
+  hProcess = process_init_fd(hIn, hOut, hErr);
+
+  if (process_begin(hProcess, argv, envp, argv[0], NULL)) {
+    fake_exits_pending++;
+    /* process_begin() failed: make a note of that.  */
+    if (!((sub_process*) hProcess)->last_err)
+      ((sub_process*) hProcess)->last_err = -1;
+    ((sub_process*) hProcess)->exit_code = process_last_err(hProcess);
+
+    /* close up unused handles */
+    if (hIn != INVALID_HANDLE_VALUE)
+      CloseHandle(hIn);
+    if (hOut != INVALID_HANDLE_VALUE)
+      CloseHandle(hOut);
+    if (hErr != INVALID_HANDLE_VALUE)
+      CloseHandle(hErr);
+  }
+
+  process_register(hProcess);
+
+  return hProcess;
+}
diff --git a/w32/subproc/w32err.c b/w32/subproc/w32err.c
new file mode 100644
index 0000000..9ff4f4c
--- /dev/null
+++ b/w32/subproc/w32err.c
@@ -0,0 +1,85 @@
+/* Error handling for Windows
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <stdlib.h>
+#include <windows.h>
+#include "makeint.h"
+#include "w32err.h"
+
+/*
+ * Description: the windows32 version of perror()
+ *
+ * Returns:  a pointer to a static error
+ *
+ * Notes/Dependencies:  I got this from
+ *      comp.os.ms-windows.programmer.win32
+ */
+const char *
+map_windows32_error_to_string (DWORD ercode) {
+/*
+ * We used to have an MSVC-specific '__declspec (thread)' qualifier
+ * here, with the following comment:
+ *
+ * __declspec (thread) necessary if you will use multiple threads on MSVC
+ *
+ * However, Make was never multithreaded on Windows (except when
+ * Ctrl-C is hit, in which case the main thread is stopped
+ * immediately, so it doesn't matter in this context).  The functions
+ * on sub_proc.c that started and stopped additional threads were
+ * never used, and are now #ifdef'ed away.  Until we need more than
+ * one thread, we have no problems with the following buffer being
+ * static.  (If and when we do need it to be in thread-local storage,
+ * the corresponding GCC qualifier is '__thread'.)
+ */
+    static char szMessageBuffer[128];
+        /* Fill message buffer with a default message in
+         * case FormatMessage fails
+         */
+    wsprintf (szMessageBuffer, "Error %ld\n", ercode);
+
+        /*
+         *  Special code for winsock error handling.
+         */
+        if (ercode > WSABASEERR) {
+#if 0
+                HMODULE hModule = GetModuleHandle("wsock32");
+                if (hModule != NULL) {
+                        FormatMessage(FORMAT_MESSAGE_FROM_HMODULE,
+                                hModule,
+                                ercode,
+                                LANG_NEUTRAL,
+                                szMessageBuffer,
+                                sizeof(szMessageBuffer),
+                                NULL);
+                        FreeLibrary(hModule);
+                }
+#else
+                O (fatal, NILF, szMessageBuffer);
+#endif
+        } else {
+                /*
+                 *  Default system message handling
+                 */
+                FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM,
+                        NULL,
+                        ercode,
+                        LANG_NEUTRAL,
+                        szMessageBuffer,
+                        sizeof(szMessageBuffer),
+                        NULL);
+        }
+    return szMessageBuffer;
+}