BUG#37718: rpl.rpl_stm_mystery22 fails sporadically on pushbuild

Problem 1: The test waits for an error in the slave sql thread,
then resolves the error and issues 'start slave'. However, there
is a gap between when the error is reported and the slave sql
thread stops. If this gap was long, the slave would still be
running when 'start slave' happened, so 'start slave' would fail
and cause a test failure.
Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
instead of wait for error in the IO thread. After stopping, the
error code is verified. If the error code is wrong, debug info
is printed. To print debug info, the debug printing code in
wait_for_slave_param.inc was moved out to a new file,
show_rpl_debug_info.inc.
Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
the file didn't explain anything useful, the test was generally
hard to follow, and the test was essentially duplicated between
rpl_stm_mystery22 and rpl_row_mystery22.
Fix 2: The test is about conflicts in the slave SQL thread,
hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
the test so that the work is done in
extra/rpl_tests/rpl_conflicts.inc, and
rpl.rpl_{row,stm}_conflicts merely sets some variables and then
sourced extra/rpl_tests/rpl_conflicts.inc.
The tests have been rewritten and comments added.
Problem 3: When calling wait_for_slave_sql_error.inc, you always
want to verify that the sql thread stops because of the expected
error and not because of some other error. Currently,
wait_for_slave_sql_error.inc allows the caller to omit the error
code, in which case all error codes are accepted.
Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
is given. Updated rpl_filter_tables_not_exist accordingly.
Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
sign was missing in a 'let' statement.
Fix 4: Added dollar sign.
Problem 5: When replicating from other servers than the one named
'master', the wait_for_slave_* macros were unable to print debug
info on the master.
Fix 5: Replace parameter $slave_keep_connection by
$master_connection.


mysql-test/extra/rpl_tests/rpl_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/include/show_rpl_debug_info.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
mysql-test/include/start_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/stop_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/sync_slave_io_with_master.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_param.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
  Had to move the printing of debug info out of the while loop because
  of BUG number 41913.
mysql-test/include/wait_for_slave_sql_error.inc:
  Made it wait until the slave sql thread has stopped. This
  takes very short time and avoids race condition bugs in
  test cases (e.g., fixes BUG#37718).
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
  Since wait_for_slave_sql_error now waits for the slave sql
  thread to stop too, wait_for_slave_sql_error_and_skip does not
  have to wait for the slave sql thread to stop.
  Also, since wait_for_slave_sql_error now requires the parameter
  $slave_sql_errno to be set, wait_for_slave_sql_error_and_skip
  requires that as well: updated the usage instructions.
mysql-test/include/wait_for_slave_sql_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/r/rpl_row_conflicts.result:
  update result file
mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
  update result file
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
  Set $slave_sql_errno, since it is now required.
  Add dollar sign to $show_sql_error (without dollar sign,
  mtr makes it an environment variable).
mysql-test/suite/rpl/t/rpl_row_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_row_mystery22.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.

1 files changed, 87 insertions, 0 deletions

diff --git a/mysql-test/include/show_rpl_debug_info.inc b/mysql-test/include/show_rpl_debug_info.inc
new file mode 100644
index 00000000000..252d63f1bf4
--- /dev/null
+++ b/mysql-test/include/show_rpl_debug_info.inc
@@ -0,0 +1,87 @@
+# ==== Purpose ====
+#
+# Print status information for replication, typically used to debug
+# test failures.
+#
+# First, the following is printed on slave:
+#
+#   SHOW SLAVE STATUS
+#   SHOW PROCESSLIST
+#   SHOW BINLOG EVENTS IN <binlog_name>
+#
+# Where <binlog_name> is the currently active binlog.
+#
+# Then, the following is printed on master:
+#
+#   SHOW MASTER STATUS
+#   SHOW PROCESSLIST
+#   SHOW BINLOG EVENTS IN <sql_binlog_name>
+#   SHOW BINLOG EVENTS IN <io_binlog_name>
+#
+# Where <sql_binlog_name> is the binlog name that the slave sql thread
+# is currently reading from and <io_binlog_name> is the binlog that
+# the slave IO thread is currently reading from.
+#
+# ==== Usage ====
+#
+# [let $master_connection= <connection>;]
+# source include/show_rpl_debug_info.inc;
+#
+# If $master_connection is set, debug info will be retrieved from the
+# connection named $master_connection.  Otherwise, it will be
+# retrieved from the 'master' connection if the current connection is
+# 'slave'.
+
+let $_con= $CURRENT_CONNECTION;
+--echo
+--echo [on $_con]
+--echo
+--echo **** SHOW SLAVE STATUS on $_con ****
+query_vertical SHOW SLAVE STATUS;
+--echo
+--echo **** SHOW PROCESSLIST on $_con ****
+SHOW PROCESSLIST;
+--echo
+--echo **** SHOW BINLOG EVENTS on $_con ****
+let $binlog_name= query_get_value("SHOW MASTER STATUS", File, 1);
+eval SHOW BINLOG EVENTS IN '$binlog_name';
+
+let $_master_con= $master_connection;
+if (`SELECT '$_master_con' = ''`)
+{
+  if (`SELECT '$_con' = 'slave'`)
+  {
+    let $_master_con= master;
+  }
+  if (`SELECT '$_master_con' = ''`)
+  {
+    --echo Unable to determine master connection. No debug info printed for master.
+    --echo Please fix the test case by setting $master_connection before sourcing
+    --echo show_rpl_debug_info.inc.
+  }
+}
+
+if (`SELECT '$_master_con' != ''`)
+{
+
+  let $master_binlog_name_io= query_get_value("SHOW SLAVE STATUS", Master_Log_File, 1);
+  let $master_binlog_name_sql= query_get_value("SHOW SLAVE STATUS", Relay_Master_Log_File, 1);
+  --echo
+  --echo [on $_master_con]
+  connection $_master_con;
+  --echo
+  --echo **** SHOW MASTER STATUS on $_master_con ****
+  query_vertical SHOW MASTER STATUS;
+  --echo
+  --echo **** SHOW PROCESSLIST on $_master_con ****
+  SHOW PROCESSLIST;
+  --echo
+  --echo **** SHOW BINLOG EVENTS on $_master_con ****
+  eval SHOW BINLOG EVENTS IN '$master_binlog_name_sql';
+  if (`SELECT '$master_binlog_name_io' != '$master_binlog_name_sql'`)
+  {
+    eval SHOW BINLOG EVENTS IN '$master_binlog_name_io';
+  }
+
+  connection $_con;
+}