diff options
Diffstat (limited to 'mysql-test/suite/rpl/t')
37 files changed, 5359 insertions, 39 deletions
diff --git a/mysql-test/suite/rpl/t/rpl_binlog_errors.test b/mysql-test/suite/rpl/t/rpl_binlog_errors.test index 30faaf79613..ab95c9b4ee3 100644 --- a/mysql-test/suite/rpl/t/rpl_binlog_errors.test +++ b/mysql-test/suite/rpl/t/rpl_binlog_errors.test @@ -1 +1,443 @@ ---source include/rpl_binlog_errors.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# +# Usage: +# --let $binlog_limit= X[,Y] # optional +# +# Semantics of the value is the same as in include/show_binlog_events.inc +# which the script calls as a part of the test flow. +# The goal is to print the event demonstrating the triggered error, +# so normally Y should be 1 (print the exact event only); +# however, depending on test-specific server options, the offset X +# can be different. +# + +# BUG#46166: MYSQL_BIN_LOG::new_file_impl is not propagating error +# when generating new name. +# +# WHY +# === +# +# We want to check whether error is reported or not when +# new_file_impl fails (this may happen when rotation is not +# possible because there is some problem finding an +# unique filename). +# +# HOW +# === +# +# Test cases are documented inline. + +-- source include/have_innodb.inc +-- source include/have_debug.inc +-- source include/master-slave.inc + +-- echo ####################################################################### +-- echo ####################### PART 1: MASTER TESTS ########################## +-- echo ####################################################################### + + +### ACTION: stopping slave as it is not needed for the first part of +### the test + +-- connection slave +-- source include/stop_slave.inc +-- connection master + +call mtr.add_suppression("Can't generate a unique log-filename"); +call mtr.add_suppression("Writing one row to the row-based binary log failed.*"); +call mtr.add_suppression("Error writing file .*"); +call mtr.add_suppression("Could not use master-bin for logging"); + +SET @old_debug= @@global.debug_dbug; + +### ACTION: create a large file (> 4096 bytes) that will be later used +### in LOAD DATA INFILE to check binlog errors in its vacinity +-- let $load_file= $MYSQLTEST_VARDIR/tmp/bug_46166.data +-- let $MYSQLD_DATADIR= `select @@datadir` +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- eval SELECT repeat('x',8192) INTO OUTFILE '$load_file' + +### ACTION: create a small file (< 4096 bytes) that will be later used +### in LOAD DATA INFILE to check for absence of binlog errors +### when file loading this file does not force flushing and +### rotating the binary log +-- let $load_file2= $MYSQLTEST_VARDIR/tmp/bug_46166-2.data +-- let $MYSQLD_DATADIR= `select @@datadir` +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- eval SELECT repeat('x',10) INTO OUTFILE '$load_file2' + +RESET MASTER; + +-- echo ###################### TEST #1 + +### ASSERTION: no problem flushing logs (should show two binlogs) +FLUSH LOGS; +-- echo # assert: must show two binlogs +-- source include/show_binary_logs.inc + +-- echo ###################### TEST #2 + +### ASSERTION: check that FLUSH LOGS actually fails and reports +### failure back to the user if find_uniq_filename fails +### (should show just one binlog) + +RESET MASTER; +SET @@global.debug_dbug="d,error_unique_log_filename"; +-- error ER_NO_UNIQUE_LOGFILE +FLUSH LOGS; +-- echo # assert: must show one binlog +-- source include/show_binary_logs.inc + +### ACTION: clean up and move to next test +SET @@global.debug_dbug=@old_debug; +RESET MASTER; + +-- echo ###################### TEST #3 + +### ACTION: create some tables (t1, t2, t4) and insert some values in +### table t1 +CREATE TABLE t1 (a INT); +CREATE TABLE t2 (a VARCHAR(16384)) Engine=InnoDB; +CREATE TABLE t4 (a VARCHAR(16384)); +INSERT INTO t1 VALUES (1); +RESET MASTER; + +### ASSERTION: we force rotation of the binary log because it exceeds +### the max_binlog_size option (should show two binary +### logs) + +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2 + +# shows two binary logs +-- echo # assert: must show two binlog +-- source include/show_binary_logs.inc + +# clean up the table and the binlog to be used in next part of test +SET @@global.debug_dbug=@old_debug; +DELETE FROM t2; +RESET MASTER; + +-- echo ###################### TEST #4 + +### ASSERTION: load the big file into a transactional table and check +### that it reports error. The table will contain the +### changes performed despite the fact that it reported an +### error. + +SET @@global.debug_dbug="d,error_unique_log_filename"; +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- error ER_NO_UNIQUE_LOGFILE +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2 + +# show table +-- echo # assert: must show one entry +SELECT count(*) FROM t2; + +# clean up the table and the binlog to be used in next part of test +SET @@global.debug_dbug=@old_debug; +DELETE FROM t2; +RESET MASTER; + +-- echo ###################### TEST #5 + +### ASSERTION: load the small file into a transactional table and +### check that it succeeds + +SET @@global.debug_dbug="d,error_unique_log_filename"; +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- eval LOAD DATA INFILE '$load_file2' INTO TABLE t2 + +# show table +-- echo # assert: must show one entry +SELECT count(*) FROM t2; + +# clean up the table and the binlog to be used in next part of test +SET @@global.debug_dbug=@old_debug; +DELETE FROM t2; +RESET MASTER; + +-- echo ###################### TEST #6 + +### ASSERTION: check that even if one is using a transactional table +### and explicit transactions (no autocommit) if rotation +### fails we get the error. Transaction is not rolledback +### because rotation happens after the commit. + +SET @@global.debug_dbug="d,error_unique_log_filename"; +SET AUTOCOMMIT=0; +INSERT INTO t2 VALUES ('muse'); +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2 +INSERT INTO t2 VALUES ('muse'); +-- error ER_NO_UNIQUE_LOGFILE +COMMIT; + +### ACTION: Show the contents of the table after the test +-- echo # assert: must show three entries +SELECT count(*) FROM t2; + +### ACTION: clean up and move to the next test +SET AUTOCOMMIT= 1; +SET @@global.debug_dbug=@old_debug; +DELETE FROM t2; +RESET MASTER; + +-- echo ###################### TEST #7 + +### ASSERTION: check that on a non-transactional table, if rotation +### fails then an error is reported and an incident event +### is written to the current binary log. + +SET @@global.debug_dbug="d,error_unique_log_filename"; + +# Disable logging Annotate_rows events to preserve events count. +let $binlog_annotate_row_events_saved= `SELECT @@binlog_annotate_row_events`; +SET @@binlog_annotate_row_events= 0; + +SELECT count(*) FROM t4; +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- error ER_NO_UNIQUE_LOGFILE +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4 + +-- echo # assert: must show 1 entry +SELECT count(*) FROM t4; + +-- echo ### check that the incident event is written to the current log +SET @@global.debug_dbug=@old_debug; +if (!$binlog_limit) +{ + -- let $binlog_limit= 4,1 +} +-- source include/show_binlog_events.inc + +# clean up and move to next test +DELETE FROM t4; + +--disable_query_log +eval SET @@binlog_annotate_row_events= $binlog_annotate_row_events_saved; +--enable_query_log + +RESET MASTER; + +-- echo ###################### TEST #8 + +### ASSERTION: check that statements end up in error but they succeed +### on changing the data. + +SET @@global.debug_dbug="d,error_unique_log_filename"; +-- echo # must show 0 entries +SELECT count(*) FROM t4; +SELECT count(*) FROM t2; + +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- error ER_NO_UNIQUE_LOGFILE +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4 +-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +-- error ER_NO_UNIQUE_LOGFILE +-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2 +-- error ER_NO_UNIQUE_LOGFILE +INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc'); + +-- echo # INFO: Count(*) Before Offending DELETEs +-- echo # assert: must show 1 entry +SELECT count(*) FROM t4; +-- echo # assert: must show 4 entries +SELECT count(*) FROM t2; + +-- error ER_NO_UNIQUE_LOGFILE +DELETE FROM t4; +-- error ER_NO_UNIQUE_LOGFILE +DELETE FROM t2; + +-- echo # INFO: Count(*) After Offending DELETEs +-- echo # assert: must show zero entries +SELECT count(*) FROM t4; +SELECT count(*) FROM t2; + +# remove fault injection +SET @@global.debug_dbug=@old_debug; + +-- echo ###################### TEST #9 + +### ASSERTION: check that if we disable binlogging, then statements +### succeed. +SET @@global.debug_dbug="d,error_unique_log_filename"; +SET SQL_LOG_BIN=0; +INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc'), ('ddd'); +INSERT INTO t4 VALUES ('eee'), ('fff'), ('ggg'), ('hhh'); +-- echo # assert: must show four entries +SELECT count(*) FROM t2; +SELECT count(*) FROM t4; +DELETE FROM t2; +DELETE FROM t4; +-- echo # assert: must show zero entries +SELECT count(*) FROM t2; +SELECT count(*) FROM t4; +SET SQL_LOG_BIN=1; +SET @@global.debug_dbug=@old_debug; + +-- echo ###################### TEST #10 + +### ASSERTION: check that error is reported if there is a failure +### while registering the index file and the binary log +### file or failure to write the rotate event. + +call mtr.add_suppression("MYSQL_BIN_LOG::open failed to sync the index file."); +call mtr.add_suppression("Could not use .*"); + +RESET MASTER; +SHOW WARNINGS; + +# +d,fault_injection_registering_index => injects fault on MYSQL_BIN_LOG::open +SET @@global.debug_dbug="d,fault_injection_registering_index"; +-- replace_regex /\.[\\\/]master/master/ +-- error ER_CANT_OPEN_FILE +FLUSH LOGS; +SET @@global.debug_dbug=@old_debug; + +-- error ER_NO_BINARY_LOGGING +SHOW BINARY LOGS; + +# issue some statements and check that they don't fail +CREATE TABLE t5 (a INT); +INSERT INTO t4 VALUES ('bbbbb'); +INSERT INTO t2 VALUES ('aaaaa'); +DELETE FROM t4; +DELETE FROM t2; +DROP TABLE t5; +flush tables; + +-- echo ###################### TEST #11 + +### ASSERTION: check that error is reported if there is a failure +### while opening the index file and the binary log file or +### failure to write the rotate event. + +# restart the server so that we have binlog again +--let $rpl_server_number= 1 +--source include/rpl_restart_server.inc + +# +d,fault_injection_openning_index => injects fault on MYSQL_BIN_LOG::open_index_file +SET @@global.debug_dbug="d,fault_injection_openning_index"; +-- replace_regex /\.[\\\/]master/master/ +-- error ER_CANT_OPEN_FILE +FLUSH LOGS; +SET @@global.debug_dbug=@old_debug; + +-- error ER_FLUSH_MASTER_BINLOG_CLOSED +RESET MASTER; + +# issue some statements and check that they don't fail +CREATE TABLE t5 (a INT); +INSERT INTO t4 VALUES ('bbbbb'); +INSERT INTO t2 VALUES ('aaaaa'); +DELETE FROM t4; +DELETE FROM t2; +DROP TABLE t5; +flush tables; + +# restart the server so that we have binlog again +--let $rpl_server_number= 1 +--source include/rpl_restart_server.inc + +-- echo ###################### TEST #12 + +### ASSERTION: check that error is reported if there is a failure +### while writing the rotate event when creating a new log +### file. + +# +d,fault_injection_new_file_rotate_event => injects fault on MYSQL_BIN_LOG::MYSQL_BIN_LOG::new_file_impl +SET @@global.debug_dbug="d,fault_injection_new_file_rotate_event"; +-- error ER_ERROR_ON_WRITE +FLUSH LOGS; +SET @@global.debug_dbug=@old_debug; + +-- error ER_FLUSH_MASTER_BINLOG_CLOSED +RESET MASTER; + +# issue some statements and check that they don't fail +CREATE TABLE t5 (a INT); +INSERT INTO t4 VALUES ('bbbbb'); +INSERT INTO t2 VALUES ('aaaaa'); +DELETE FROM t4; +DELETE FROM t2; +DROP TABLE t5; +flush tables; + +# restart the server so that we have binlog again +--let $rpl_server_number= 1 +--source include/rpl_restart_server.inc + +## clean up +DROP TABLE t1, t2, t4; +RESET MASTER; + +# restart slave again +-- connection slave +-- source include/start_slave.inc +-- connection master + +-- echo ####################################################################### +-- echo ####################### PART 2: SLAVE TESTS ########################### +-- echo ####################################################################### + +### setup +--source include/rpl_reset.inc +-- connection slave + +# Slave tests rely on logic of non-gtid mode +--source include/stop_slave.inc +CHANGE MASTER TO MASTER_USE_GTID=NO; +--source include/start_slave.inc + +# slave suppressions + +call mtr.add_suppression("Slave I/O: Relay log write failure: could not queue event from master.*"); +call mtr.add_suppression("Error writing file .*"); +call mtr.add_suppression("Could not use .*"); +call mtr.add_suppression("MYSQL_BIN_LOG::open failed to sync the index file."); +call mtr.add_suppression("Can't generate a unique log-filename .*"); +-- echo ###################### TEST #13 + +#### ASSERTION: check against unique log filename error +-- let $io_thd_injection_fault_flag= error_unique_log_filename +-- let $slave_io_errno= 1595 +-- let $show_slave_io_error= 1 +-- source include/io_thd_fault_injection.inc + +-- echo ###################### TEST #14 + +#### ASSERTION: check against rotate failing +-- let $io_thd_injection_fault_flag= fault_injection_new_file_rotate_event +-- let $slave_io_errno= 1595 +-- let $show_slave_io_error= 1 +-- source include/io_thd_fault_injection.inc + +-- echo ###################### TEST #15 + +#### ASSERTION: check against relay log open failure +-- let $io_thd_injection_fault_flag= fault_injection_registering_index +-- let $slave_io_errno= 1595 +-- let $show_slave_io_error= 1 +-- source include/io_thd_fault_injection.inc + +-- echo ###################### TEST #16 + +#### ASSERTION: check against relay log index open failure +-- let $io_thd_injection_fault_flag= fault_injection_openning_index +-- let $slave_io_errno= 1595 +-- let $show_slave_io_error= 1 +-- source include/io_thd_fault_injection.inc + +### clean up +-- source include/stop_slave_sql.inc +RESET SLAVE; +RESET MASTER; +--remove_file $load_file +--remove_file $load_file2 +--let $rpl_only_running_threads= 1 +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_binlog_index.test b/mysql-test/suite/rpl/t/rpl_binlog_index.test index 95c49c3d574..6112affb3c4 100644 --- a/mysql-test/suite/rpl/t/rpl_binlog_index.test +++ b/mysql-test/suite/rpl/t/rpl_binlog_index.test @@ -17,10 +17,6 @@ # BUG#12133 master.index file keeps mysqld from starting if bin log has been moved # BUG#42576 Relay logs in relay-log.info&localhost-relay-bin.index not processed after move -source include/master-slave.inc; -# There is no need to run this test case on all binlog format -source include/have_binlog_format_row.inc; - # Since this test relies heavily on filesystem operations (like # moving files around, backslashes and so forth) we avoid messing # around with windows access violations for not cluttering the @@ -28,6 +24,10 @@ source include/have_binlog_format_row.inc; # it is not 100% compliant. --source include/not_windows.inc +source include/master-slave.inc; +# There is no need to run this test case on all binlog format +source include/have_binlog_format_row.inc; + connection master; --let $master_datadir= `select @@datadir` connection slave; diff --git a/mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test b/mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test index 573c1d111fc..7c1d0ea25e2 100644 --- a/mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test +++ b/mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test @@ -1 +1,88 @@ ---source include/rpl_cant_read_event_incident.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# +# Bug#11747416 : 32228 A disk full makes binary log corrupt. +# +# +# The test demonstrates reading from binlog error propagation to slave +# and reporting there. +# Conditions for the bug include a crash at time of the last event to +# the binlog was written partly. With the fixes the event is not sent out +# any longer, but rather the dump thread sends out a sound error message. +# +# Crash is not simulated. A binlog with partly written event in its end is installed +# and replication is started from it. +# + +--source include/have_binlog_format_mixed.inc +--source include/master-slave.inc + +--connection slave +--source include/stop_slave.inc +CHANGE MASTER TO MASTER_USE_GTID=NO; +--source include/start_slave.inc + +# Make sure the slave is stopped while we are messing with master. +# Otherwise we get occasional failures as the slave manages to re-connect +# to the newly started master and we get extra events applied, causing +# conflicts. +--source include/stop_slave.inc + +--connection master +call mtr.add_suppression("Error in Log_event::read_log_event()"); +--let $datadir= `SELECT @@datadir` + +--let $rpl_server_number= 1 +--source include/rpl_stop_server.inc + +--remove_file $datadir/master-bin.000001 +--copy_file $MYSQL_TEST_DIR/std_data/bug11747416_32228_binlog.000001 $datadir/master-bin.000001 + +--let $rpl_server_number= 1 +--source include/rpl_start_server.inc + +--source include/wait_until_connected_again.inc + +# evidence of the partial binlog +--error ER_ERROR_WHEN_EXECUTING_COMMAND +show binlog events; + +--connection slave +call mtr.add_suppression("Slave I/O: Got fatal error 1236 from master when reading data from binary log"); +--let $master_use_gtid_option= No +--source include/reset_slave.inc +start slave; + +# ER_MASTER_FATAL_ERROR_READING_BINLOG 1236 +--let $slave_param=Last_IO_Errno +--let $slave_param_value=1236 +--source include/wait_for_slave_param.inc + +--let $slave_field_result_replace= / at [0-9]*/ at XXX/ +--let $status_items= Last_IO_Errno, Last_IO_Error +--source include/show_slave_status.inc + +# +# Cleanup +# + +--connection master +reset master; + +--connection slave +stop slave; +reset slave; +# Table was created from binlog, it may not be created if SQL thread is running +# slowly and IO thread reaches incident before SQL thread applies it. +--disable_warnings +drop table if exists t; +--enable_warnings +reset master; + +--echo End of the tests +--let $rpl_only_running_threads= 1 +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_checksum.test b/mysql-test/suite/rpl/t/rpl_checksum.test index 0edf8fda7f3..fc765744b3f 100644 --- a/mysql-test/suite/rpl/t/rpl_checksum.test +++ b/mysql-test/suite/rpl/t/rpl_checksum.test @@ -1 +1,342 @@ ---source include/rpl_checksum.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# WL2540 replication events checksum +# Testing configuration parameters + +--source include/have_debug.inc +--source include/have_binlog_format_mixed.inc +--source include/master-slave.inc + +--connection slave +--source include/stop_slave.inc +CHANGE MASTER TO MASTER_USE_GTID=NO; +--source include/start_slave.inc + +--connection master +call mtr.add_suppression('Slave can not handle replication events with the checksum that master is configured to log'); +call mtr.add_suppression('Replication event checksum verification failed'); +# due to C failure simulation +call mtr.add_suppression('Relay log write failure: could not queue event from master'); +call mtr.add_suppression('Master is configured to log replication events with checksum, but will not send such events to slaves that cannot process them'); + +# A. read/write access to the global vars: +# binlog_checksum master_verify_checksum slave_sql_verify_checksum + +connection master; + +set @master_save_binlog_checksum= @@global.binlog_checksum; +set @save_master_verify_checksum = @@global.master_verify_checksum; + +select @@global.binlog_checksum as 'must be CRC32 because of the command line option'; +--error ER_INCORRECT_GLOBAL_LOCAL_VAR +select @@session.binlog_checksum as 'no session var'; + +select @@global.master_verify_checksum as 'must be zero because of default'; +--error ER_INCORRECT_GLOBAL_LOCAL_VAR +select @@session.master_verify_checksum as 'no session var'; + +connection slave; + +set @slave_save_binlog_checksum= @@global.binlog_checksum; +set @save_slave_sql_verify_checksum = @@global.slave_sql_verify_checksum; + +select @@global.slave_sql_verify_checksum as 'must be one because of default'; +--error ER_INCORRECT_GLOBAL_LOCAL_VAR +select @@session.slave_sql_verify_checksum as 'no session var'; + +connection master; + +source include/show_binary_logs.inc; +set @@global.binlog_checksum = NONE; +select @@global.binlog_checksum; +--echo *** must be rotations seen *** +source include/show_binary_logs.inc; + +set @@global.binlog_checksum = default; +select @@global.binlog_checksum; + +# testing lack of side-effects in non-effective update of binlog_checksum: +set @@global.binlog_checksum = CRC32; +select @@global.binlog_checksum; +set @@global.binlog_checksum = CRC32; + +set @@global.master_verify_checksum = 0; +set @@global.master_verify_checksum = default; + +--error ER_WRONG_VALUE_FOR_VAR +set @@global.binlog_checksum = ADLER32; +--error ER_WRONG_VALUE_FOR_VAR +set @@global.master_verify_checksum = 2; # the var is of bool type + +connection slave; + +set @@global.slave_sql_verify_checksum = 0; +set @@global.slave_sql_verify_checksum = default; +--error ER_WRONG_VALUE_FOR_VAR +set @@global.slave_sql_verify_checksum = 2; # the var is of bool type + +# +# B. Old Slave to New master conditions +# +# while master does not send a checksum-ed binlog the Old Slave can +# work with the New Master + +connection master; + +set @@global.binlog_checksum = NONE; +create table t1 (a int); + +# testing that binlog rotation preserves opt_binlog_checksum value +flush logs; +flush logs; +-- source include/wait_for_binlog_checkpoint.inc +flush logs; + +sync_slave_with_master; +#connection slave; +# checking that rotation on the slave side leaves slave stable +flush logs; +flush logs; +flush logs; +select count(*) as zero from t1; + +source include/stop_slave.inc; + +connection master; +set @@global.binlog_checksum = CRC32; +-- source include/wait_for_binlog_checkpoint.inc +insert into t1 values (1) /* will not be applied on slave due to simulation */; + +# instruction to the dump thread + +connection slave; +set @saved_dbug = @@global.debug_dbug; +set @@global.debug_dbug='d,simulate_slave_unaware_checksum'; +start slave; +--let $slave_io_errno= 1236 +--let $show_slave_io_error= 1 +source include/wait_for_slave_io_error.inc; + +select count(*) as zero from t1; + +set @@global.debug_dbug = @saved_dbug; + +connection slave; +source include/start_slave.inc; + +# +# C. checksum failure simulations +# + +# C1. Failure by a client thread +connection master; +set @@global.master_verify_checksum = 1; +set @save_dbug = @@session.debug_dbug; +set @@session.debug_dbug='d,simulate_checksum_test_failure'; +--error ER_ERROR_WHEN_EXECUTING_COMMAND +show binlog events; +SET debug_dbug= @save_dbug; +set @@global.master_verify_checksum = default; + +#connection master; +sync_slave_with_master; + +connection slave; +source include/stop_slave.inc; + +connection master; +create table t2 (a int); +let $pos_master= query_get_value(SHOW MASTER STATUS, Position, 1); + +connection slave; + +# C2. Failure by IO thread +# instruction to io thread +set @saved_dbug = @@global.debug_dbug; +set @@global.debug_dbug='d,simulate_checksum_test_failure'; +start slave io_thread; +# When the checksum error is detected, the slave sets error code 1913 +# (ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE) in queue_event(), then immediately +# sets error 1595 (ER_SLAVE_RELAY_LOG_WRITE_FAILURE) in handle_slave_io(). +# So we usually get 1595, but it is occasionally possible to get 1913. +--let $slave_io_errno= 1595,1913 +--let $show_slave_io_error= 0 +source include/wait_for_slave_io_error.inc; +set @@global.debug_dbug = @saved_dbug; + +# to make IO thread re-read it again w/o the failure +start slave io_thread; +let $slave_param= Read_Master_Log_Pos; +let $slave_param_value= $pos_master; +source include/wait_for_slave_param.inc; + +# C3. Failure by SQL thread +# instruction to sql thread; +set @@global.slave_sql_verify_checksum = 1; + +set @@global.debug_dbug='d,simulate_checksum_test_failure'; + +start slave sql_thread; +--let $slave_sql_errno= 1593 +--let $show_slave_sql_error= 1 +source include/wait_for_slave_sql_error.inc; + +# resuming SQL thread to parse out the event w/o the failure + +set @@global.debug_dbug = @saved_dbug; +source include/start_slave.inc; + +connection master; +sync_slave_with_master; + +#connection slave; +select count(*) as 'must be zero' from t2; + +# +# D. Reset slave, Change-Master, Binlog & Relay-log rotations with +# random value on binlog_checksum on both master and slave +# +connection slave; +stop slave; +--let $master_use_gtid_option= No +--source include/reset_slave.inc + +# randomize slave server's own checksum policy +set @@global.binlog_checksum= IF(floor((rand()*1000)%2), "CRC32", "NONE"); +flush logs; + +connection master; +set @@global.binlog_checksum= CRC32; +reset master; +flush logs; +create table t3 (a int, b char(5)); + +connection slave; +source include/start_slave.inc; + +connection master; +sync_slave_with_master; + +#connection slave; +select count(*) as 'must be zero' from t3; +source include/stop_slave.inc; +--replace_result $MASTER_MYPORT MASTER_PORT +eval change master to master_host='127.0.0.1',master_port=$MASTER_MYPORT, master_user='root'; + +connection master; +flush logs; +reset master; +insert into t3 value (1, @@global.binlog_checksum); + +connection slave; +source include/start_slave.inc; +flush logs; + +connection master; +sync_slave_with_master; + +#connection slave; +select count(*) as 'must be one' from t3; + +connection master; +set @@global.binlog_checksum= IF(floor((rand()*1000)%2), "CRC32", "NONE"); +insert into t3 value (1, @@global.binlog_checksum); +sync_slave_with_master; + +#connection slave; + +#clean-up + +connection master; +drop table t1, t2, t3; +set @@global.binlog_checksum = @master_save_binlog_checksum; +set @@global.master_verify_checksum = @save_master_verify_checksum; + +# +# BUG#58564: flush_read_lock fails in mysql-trunk-bugfixing after merging with WL#2540 +# +# Sanity check that verifies that no assertions are triggered because +# of old FD events (generated by versions prior to server released with +# checksums feature) +# +# There is no need for query log, if something wrong this should trigger +# an assertion + +--disable_query_log + +BINLOG ' +MfmqTA8BAAAAZwAAAGsAAAABAAQANS41LjctbTMtZGVidWctbG9nAAAAAAAAAAAAAAAAAAAAAAAA +AAAAAAAAAAAAAAAAAAAx+apMEzgNAAgAEgAEBAQEEgAAVAAEGggAAAAICAgCAA== +'; + +--enable_query_log + +#connection slave; +sync_slave_with_master; + + +--echo *** Bug#59123 / MDEV-5799: INCIDENT_EVENT checksum written to error log as garbage characters *** + +--connection master + +--source include/wait_for_binlog_checkpoint.inc +CREATE TABLE t4 (a INT PRIMARY KEY); +INSERT INTO t4 VALUES (1); + +SET sql_log_bin=0; +CALL mtr.add_suppression("\\[ERROR\\] Can't generate a unique log-filename"); +SET sql_log_bin=1; +SET @old_dbug= @@GLOBAL.debug_dbug; +SET debug_dbug= '+d,binlog_inject_new_name_error'; +--error ER_NO_UNIQUE_LOGFILE +FLUSH LOGS; +SET debug_dbug= @old_dbug; + +INSERT INTO t4 VALUES (2); + +--connection slave +--let $slave_sql_errno= 1590 +--source include/wait_for_slave_sql_error.inc + +# Search the error log for the error message. +# The bug was that 4 garbage bytes were output in the middle of the error +# message; by searching for a pattern that spans that location, we can +# catch the error. +let $log_error_= `SELECT @@GLOBAL.log_error`; +if(!$log_error_) +{ + # MySQL Server on windows is started with --console and thus + # does not know the location of its .err log, use default location + let $log_error_ = $MYSQLTEST_VARDIR/log/mysqld.2.err; +} +--let SEARCH_FILE= $log_error_ +--let SEARCH_PATTERN= Slave SQL: The incident LOST_EVENTS occurred on the master\. Message: error writing to the binary log, Internal MariaDB error code: 1590 +--source include/search_pattern_in_file.inc + +SELECT * FROM t4 ORDER BY a; +STOP SLAVE IO_THREAD; +SET sql_slave_skip_counter= 1; +--source include/start_slave.inc + +--connection master +--save_master_pos + +--connection slave +--sync_with_master +SELECT * FROM t4 ORDER BY a; + + +--connection slave +set @@global.binlog_checksum = @slave_save_binlog_checksum; +set @@global.slave_sql_verify_checksum = @save_slave_sql_verify_checksum; + +--echo End of tests + +--connection master +DROP TABLE t4; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_checksum_cache.test b/mysql-test/suite/rpl/t/rpl_checksum_cache.test index 59b338d2556..e04f618b81e 100644 --- a/mysql-test/suite/rpl/t/rpl_checksum_cache.test +++ b/mysql-test/suite/rpl/t/rpl_checksum_cache.test @@ -1 +1,261 @@ ---source include/rpl_checksum_cache.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +-- source include/have_innodb.inc +-- source include/master-slave.inc + +--disable_warnings +call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. .*Statement: insert into t2 set data=repeat.*'a', @act_size.*"); +call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. .*Statement: insert into t1 values.* NAME_CONST.*'n',.*, @data .*"); +--enable_warnings + +connection master; +set @save_binlog_cache_size = @@global.binlog_cache_size; +set @save_binlog_checksum = @@global.binlog_checksum; +set @save_master_verify_checksum = @@global.master_verify_checksum; +set @@global.binlog_cache_size = 4096; +set @@global.binlog_checksum = CRC32; +set @@global.master_verify_checksum = 1; + +# restart slave to force the dump thread to verify events (on master side) +connection slave; +source include/stop_slave.inc; +source include/start_slave.inc; + +connection master; + +# +# Testing a critical part of checksum handling dealing with transaction cache. +# The cache's buffer size is set to be less than the transaction's footprint +# in binlog. +# +# To verify combined buffer-by-buffer read out of the file and fixing crc per event +# there are the following parts: +# +# 1. the event size is much less than the cache's buffer +# 2. the event size is bigger than the cache's buffer +# 3. the event size if approximately the same as the cache's buffer +# 4. all in above + +# +# 1. the event size is much less than the cache's buffer +# + +flush status; +show status like "binlog_cache_use"; +show status like "binlog_cache_disk_use"; +--disable_warnings +drop table if exists t1; +--enable_warnings + +# +# parameter to ensure the test slightly varies binlog content +# between different invocations +# +let $deviation_size=32; +eval create table t1 (a int PRIMARY KEY, b CHAR($deviation_size)) engine=innodb; + +# Now we are going to create transaction which is long enough so its +# transaction binlog will be flushed to disk... + +delimiter |; +create procedure test.p_init (n int, size int) +begin + while n > 0 do + select round(RAND() * size) into @act_size; + set @data = repeat('a', @act_size); + insert into t1 values(n, @data ); + set n= n-1; + end while; +end| + +delimiter ;| + +let $1 = 4000; # PB2 can run it slow to time out on following sync_slave_with_master:s + +begin; +--disable_warnings +# todo: check if it is really so. +#+Note 1592 Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave. +eval call test.p_init($1, $deviation_size); +--enable_warnings +commit; + +show status like "binlog_cache_use"; +--echo *** binlog_cache_disk_use must be non-zero *** +show status like "binlog_cache_disk_use"; + +sync_slave_with_master; + +let $diff_tables=master:test.t1, slave:test.t1; +source include/diff_tables.inc; + +# undoing changes with verifying the above once again +connection master; + +begin; +delete from t1; +commit; + +sync_slave_with_master; + + +# +# 2. the event size is bigger than the cache's buffer +# +connection master; + +flush status; +let $t2_data_size= `select 3 * @@global.binlog_cache_size`; +let $t2_aver_size= `select 2 * @@global.binlog_cache_size`; +let $t2_max_rand= `select 1 * @@global.binlog_cache_size`; + +eval create table t2(a int auto_increment primary key, data VARCHAR($t2_data_size)) ENGINE=Innodb; +let $1=100; +--disable_query_log +begin; +while ($1) +{ + eval select round($t2_aver_size + RAND() * $t2_max_rand) into @act_size; + set @data = repeat('a', @act_size); + insert into t2 set data = @data; + dec $1; +} +commit; +--enable_query_log +show status like "binlog_cache_use"; +--echo *** binlog_cache_disk_use must be non-zero *** +show status like "binlog_cache_disk_use"; + +sync_slave_with_master; + +let $diff_tables=master:test.t2, slave:test.t2; +source include/diff_tables.inc; + +# undoing changes with verifying the above once again +connection master; + +begin; +delete from t2; +commit; + +sync_slave_with_master; + +# +# 3. the event size if approximately the same as the cache's buffer +# + +connection master; + +flush status; +let $t3_data_size= `select 2 * @@global.binlog_cache_size`; +let $t3_aver_size= `select (9 * @@global.binlog_cache_size) / 10`; +let $t3_max_rand= `select (2 * @@global.binlog_cache_size) / 10`; + +eval create table t3(a int auto_increment primary key, data VARCHAR($t3_data_size)) engine=innodb; + +let $1= 300; +--disable_query_log +begin; +while ($1) +{ + eval select round($t3_aver_size + RAND() * $t3_max_rand) into @act_size; + insert into t3 set data= repeat('a', @act_size); + dec $1; +} +commit; +--enable_query_log +show status like "binlog_cache_use"; +--echo *** binlog_cache_disk_use must be non-zero *** +show status like "binlog_cache_disk_use"; + +sync_slave_with_master; + +let $diff_tables=master:test.t3, slave:test.t3; +source include/diff_tables.inc; + +# undoing changes with verifying the above once again +connection master; + +begin; +delete from t3; +commit; + +sync_slave_with_master; + + +# +# 4. all in above +# + +connection master; +flush status; + +delimiter |; +eval create procedure test.p1 (n int) +begin + while n > 0 do + case (select (round(rand()*100) % 3) + 1) + when 1 then + select round(RAND() * $deviation_size) into @act_size; + set @data = repeat('a', @act_size); + insert into t1 values(n, @data); + when 2 then + begin + select round($t2_aver_size + RAND() * $t2_max_rand) into @act_size; + insert into t2 set data=repeat('a', @act_size); + end; + when 3 then + begin + select round($t3_aver_size + RAND() * $t3_max_rand) into @act_size; + insert into t3 set data= repeat('a', @act_size); + end; + end case; + set n= n-1; + end while; +end| +delimiter ;| + +let $1= 1000; +set autocommit= 0; +begin; +--disable_warnings +eval call test.p1($1); +--enable_warnings +commit; + +show status like "binlog_cache_use"; +--echo *** binlog_cache_disk_use must be non-zero *** +show status like "binlog_cache_disk_use"; + +sync_slave_with_master; + +let $diff_tables=master:test.t1, slave:test.t1; +source include/diff_tables.inc; + +let $diff_tables=master:test.t2, slave:test.t2; +source include/diff_tables.inc; + +let $diff_tables=master:test.t3, slave:test.t3; +source include/diff_tables.inc; + + +connection master; + +begin; +delete from t1; +delete from t2; +delete from t3; +commit; + +drop table t1, t2, t3; +set @@global.binlog_cache_size = @save_binlog_cache_size; +set @@global.binlog_checksum = @save_binlog_checksum; +set @@global.master_verify_checksum = @save_master_verify_checksum; +drop procedure test.p_init; +drop procedure test.p1; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_corruption.test b/mysql-test/suite/rpl/t/rpl_corruption.test index e51d1c65e95..cd2a1cc7ef2 100644 --- a/mysql-test/suite/rpl/t/rpl_corruption.test +++ b/mysql-test/suite/rpl/t/rpl_corruption.test @@ -1 +1,181 @@ ---source include/rpl_corruption.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +############################################################ +# Purpose: WL#5064 Testing with corrupted events. +# The test emulates the corruption at the vary stages +# of replication: +# - in binlog file +# - in network +# - in relay log +############################################################ + +# +# The tests intensively utilize @@global.debug. Note, +# Bug#11765758 - 58754, +# @@global.debug is read by the slave threads through dbug-interface. +# Hence, before a client thread set @@global.debug we have to ensure that: +# (a) the slave threads are stopped, or (b) the slave threads are in +# sync and waiting. + +--source include/have_debug.inc +--source include/master-slave.inc + +--connection slave +--source include/stop_slave.inc +CHANGE MASTER TO MASTER_USE_GTID=NO; +--source include/start_slave.inc +--connection master + +# Block legal errors for MTR +call mtr.add_suppression('Found invalid event in binary log'); +call mtr.add_suppression('Slave I/O: Relay log write failure: could not queue event from master'); +call mtr.add_suppression('event read from binlog did not pass crc check'); +call mtr.add_suppression('Replication event checksum verification failed'); +call mtr.add_suppression('Event crc check failed! Most likely there is event corruption'); +call mtr.add_suppression('Slave SQL: Error initializing relay log position: I/O error reading event at position .*, error.* 1593'); + +SET @old_master_verify_checksum = @@master_verify_checksum; + +# Creating test table/data and set corruption position for testing +--echo # 1. Creating test table/data and set corruption position for testing +--connection master +--echo * insert/update/delete rows in table t1 * +# Corruption algorithm modifies only the first event and +# then will be reset. To avoid checking always the first event +# from binlog (usually it is FD) we randomly execute different +# statements and set position for corruption inside events. + +CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100)); +--disable_query_log +let $i=`SELECT 3+CEILING(10*RAND())`; +let $j=1; +let $pos=0; +while ($i) { + eval INSERT INTO t1 VALUES ($j, 'a', NULL); + if (`SELECT RAND() > 0.7`) + { + eval UPDATE t1 SET c = REPEAT('a', 20) WHERE a = $j; + } + if (`SELECT RAND() > 0.8`) + { + eval DELETE FROM t1 WHERE a = $j; + } + if (!$pos) { + let $pos= query_get_value(SHOW MASTER STATUS, Position, 1); + --sync_slave_with_master + --source include/stop_slave.inc + --disable_query_log + --connection master + } + dec $i; + inc $j; +} +--enable_query_log + + +# Emulate corruption in binlog file when SHOW BINLOG EVENTS is executing +--echo # 2. Corruption in master binlog and SHOW BINLOG EVENTS +SET @saved_dbug = @@global.debug_dbug; +SET @@global.debug_dbug="d,corrupt_read_log_event_char"; +--echo SHOW BINLOG EVENTS; +--disable_query_log +send_eval SHOW BINLOG EVENTS FROM $pos; +--enable_query_log +--error ER_ERROR_WHEN_EXECUTING_COMMAND +reap; + +SET @@global.debug_dbug=@saved_dbug; + +# Emulate corruption on master with crc checking on master +--echo # 3. Master read a corrupted event from binlog and send the error to slave + +# We have a rare but nasty potential race here: if the dump thread on +# the master for the _old_ slave connection has not yet discovered +# that the slave has disconnected, we will inject the corrupt event on +# the wrong connection, and the test will fail +# (+d,corrupt_read_log_event2 corrupts only one event). +# So kill any lingering dump thread (we need to kill; otherwise dump thread +# could manage to send all events down the socket before seeing it close, and +# hang forever waiting for new binlog events to be created). +let $id= `select id from information_schema.processlist where command = "Binlog Dump"`; +if ($id) +{ + --disable_query_log + --error 0,1094 + eval kill $id; + --enable_query_log +} +let $wait_condition= + SELECT COUNT(*)=0 FROM INFORMATION_SCHEMA.PROCESSLIST WHERE command = 'Binlog Dump'; +--source include/wait_condition.inc + +SET @@global.debug_dbug="d,corrupt_read_log_event2_set"; +--connection slave +START SLAVE IO_THREAD; +let $slave_io_errno= 1236; +--let $slave_timeout= 10 +--source include/wait_for_slave_io_error.inc +--connection master +SET @@global.debug_dbug=@saved_dbug; + +# Emulate corruption on master without crc checking on master +--echo # 4. Master read a corrupted event from binlog and send it to slave +--connection master +SET GLOBAL master_verify_checksum=0; +SET @@global.debug_dbug="d,corrupt_read_log_event2_set"; +--connection slave +START SLAVE IO_THREAD; +# When the checksum error is detected, the slave sets error code 1743 +# (ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE) in queue_event(), then immediately +# sets error 1595 (ER_SLAVE_RELAY_LOG_WRITE_FAILURE) in handle_slave_io(). +# So we usually get 1595, but it is occasionally possible to get 1743. +let $slave_io_errno= 1595,1743; # ER_SLAVE_RELAY_LOG_WRITE_FAILURE, ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE +--source include/wait_for_slave_io_error.inc +--connection master +SET @@global.debug_dbug=@saved_dbug; +SET GLOBAL master_verify_checksum=1; + +# Emulate corruption in network +--echo # 5. Slave. Corruption in network +--connection slave +SET @saved_dbug_slave = @@GLOBAL.debug_dbug; +SET @@global.debug_dbug="d,corrupt_queue_event"; +START SLAVE IO_THREAD; +let $slave_io_errno= 1595,1743; # ER_SLAVE_RELAY_LOG_WRITE_FAILURE, ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE +--source include/wait_for_slave_io_error.inc +SET @@global.debug_dbug=@saved_dbug_slave; + +# Emulate corruption in relay log +--echo # 6. Slave. Corruption in relay log + +SET @@global.debug_dbug="d,corrupt_read_log_event_char"; + +START SLAVE SQL_THREAD; +let $slave_sql_errno= 1593; +--source include/wait_for_slave_sql_error.inc + +SET @@global.debug_dbug=@saved_dbug_slave; + +# Start normal replication and compare same table on master +# and slave +--echo # 7. Seek diff for tables on master and slave +--connection slave +--source include/start_slave.inc +--connection master +--sync_slave_with_master +let $diff_tables= master:test.t1, slave:test.t1; +--source include/diff_tables.inc + +# Clean up +--echo # 8. Clean up +--connection master +set @@global.debug_dbug = @saved_dbug; +SET GLOBAL master_verify_checksum = @old_master_verify_checksum; +DROP TABLE t1; +--sync_slave_with_master + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_gtid_basic.test b/mysql-test/suite/rpl/t/rpl_gtid_basic.test index 004003ea524..5975c6f03c3 100644 --- a/mysql-test/suite/rpl/t/rpl_gtid_basic.test +++ b/mysql-test/suite/rpl/t/rpl_gtid_basic.test @@ -1,4 +1,575 @@ ---source include/rpl_gtid_basic.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +--source include/have_innodb.inc +--let $rpl_topology=1->2->3->4 +--source include/rpl_init.inc + +# Set up a 4-deep replication topology, then test various fail-overs +# using GTID. +# +# A -> B -> C -> D + +connection server_1; +--source include/wait_for_binlog_checkpoint.inc +--let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) +--let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) +--echo *** GTID position should be empty here *** +--replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> +eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); + +CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=MyISAM; +CREATE TABLE t2 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=InnoDB; +INSERT INTO t1 VALUES (1, "m1"); +INSERT INTO t1 VALUES (2, "m2"), (3, "m3"), (4, "m4"); +INSERT INTO t2 VALUES (1, "i1"); +BEGIN; +INSERT INTO t2 VALUES (2, "i2"), (3, "i3"); +INSERT INTO t2 VALUES (4, "i4"); +COMMIT; +save_master_pos; +source include/wait_for_binlog_checkpoint.inc; +--let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) +--let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) +--let $gtid_pos_server_1 = `SELECT @@gtid_binlog_pos` +--echo *** GTID position should be non-empty here *** +--replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> $gtid_pos_server_1 <GTID_POS_SERVER_1> +eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); + +connection server_2; +sync_with_master; +source include/wait_for_binlog_checkpoint.inc; +--let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) +--let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) +--echo *** GTID position should be the same as on server_1 *** +--replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> $gtid_pos_server_1 <GTID_POS_SERVER_1> +eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); +SELECT * FROM t1 ORDER BY a; +SELECT * FROM t2 ORDER BY a; +save_master_pos; + +connection server_3; +sync_with_master; +SELECT * FROM t1 ORDER BY a; +SELECT * FROM t2 ORDER BY a; +save_master_pos; + +connection server_4; +sync_with_master; +SELECT * FROM t1 ORDER BY a; +SELECT * FROM t2 ORDER BY a; + + +--echo *** Now take out D, let it fall behind a bit, and then test re-attaching it to A *** +connection server_4; +--source include/stop_slave.inc + +connection server_1; +INSERT INTO t1 VALUES (5, "m1a"); +INSERT INTO t2 VALUES (5, "i1a"); +save_master_pos; + +connection server_4; +--replace_result $MASTER_MYPORT MASTER_PORT +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT, + MASTER_USE_GTID=CURRENT_POS; +--source include/start_slave.inc +sync_with_master; +SELECT * FROM t1 ORDER BY a; +SELECT * FROM t2 ORDER BY a; + +--echo *** Now move B to D (C is still replicating from B) *** +connection server_2; +--source include/stop_slave.inc +--replace_result $SERVER_MYPORT_4 SERVER_MYPORT_4 +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_4, + MASTER_USE_GTID=CURRENT_POS; +--source include/start_slave.inc + +connection server_4; +UPDATE t2 SET b="j1a" WHERE a=5; +save_master_pos; + +connection server_2; +sync_with_master; +SELECT * FROM t1 ORDER BY a; +SELECT * FROM t2 ORDER BY a; + +--echo *** Now move C to D, after letting it fall a little behind *** +connection server_3; +--source include/stop_slave.inc + +connection server_1; +INSERT INTO t2 VALUES (6, "i6b"); +INSERT INTO t2 VALUES (7, "i7b"); +--source include/save_master_gtid.inc + +connection server_3; +--replace_result $SERVER_MYPORT_4 SERVER_MYPORT_4 +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_4, + MASTER_USE_GTID=CURRENT_POS; +--source include/start_slave.inc +--source include/sync_with_master_gtid.inc +SELECT * FROM t2 ORDER BY a; + +--echo *** Now change everything back to what it was, to make rpl_end.inc happy +# Also check that MASTER_USE_GTID=CURRENT_POS is still enabled. +connection server_2; +# We need to sync up server_2 before switching. If it happened to have reached +# the point 'UPDATE t2 SET b="j1a" WHERE a=5' it will fail to connect to +# server_1, which is (deliberately) missing that transaction. +--source include/sync_with_master_gtid.inc +--source include/stop_slave.inc +--replace_result $MASTER_MYPORT MASTER_MYPORT +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT; +--source include/start_slave.inc +--source include/wait_for_slave_to_start.inc + +connection server_3; +--source include/stop_slave.inc +--replace_result $SLAVE_MYPORT SLAVE_MYPORT +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SLAVE_MYPORT; +--source include/start_slave.inc +--source include/sync_with_master_gtid.inc + +connection server_4; +--source include/stop_slave.inc +--replace_result $SERVER_MYPORT_3 SERVER_MYPORT_3 +eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_3; +--source include/start_slave.inc + +connection server_1; +DROP TABLE t1,t2; +--source include/save_master_gtid.inc + +--echo *** A few more checks for BINLOG_GTID_POS function *** +--let $valid_binlog_name = query_get_value(SHOW BINARY LOGS,Log_name,1) +--error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT +SELECT BINLOG_GTID_POS(); +--error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT +SELECT BINLOG_GTID_POS('a'); +--error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT +SELECT BINLOG_GTID_POS('a',1,NULL); +SELECT BINLOG_GTID_POS(1,'a'); +SELECT BINLOG_GTID_POS(NULL,NULL); +SELECT BINLOG_GTID_POS('',1); +SELECT BINLOG_GTID_POS('a',1); +eval SELECT BINLOG_GTID_POS('$valid_binlog_name',-1); +eval SELECT BINLOG_GTID_POS('$valid_binlog_name',0); +eval SELECT BINLOG_GTID_POS('$valid_binlog_name',18446744073709551615); +eval SELECT BINLOG_GTID_POS('$valid_binlog_name',18446744073709551616); + + +--echo *** Some tests of @@GLOBAL.gtid_binlog_state *** +--connection server_2 +--source include/sync_with_master_gtid.inc +--source include/stop_slave.inc + +--connection server_1 +SET @old_state= @@GLOBAL.gtid_binlog_state; + +--error ER_BINLOG_MUST_BE_EMPTY +SET GLOBAL gtid_binlog_state = ''; +RESET MASTER; +SET GLOBAL gtid_binlog_state = ''; +FLUSH LOGS; +--source include/show_binary_logs.inc +SET GLOBAL gtid_binlog_state = '0-1-10,1-2-20,0-3-30'; +--source include/show_binary_logs.inc +--let $binlog_file= master-bin.000001 +--let $binlog_start= 4 +--source include/show_binlog_events.inc +#SELECT @@GLOBAL.gtid_binlog_pos; +#SELECT @@GLOBAL.gtid_binlog_state; +--error ER_BINLOG_MUST_BE_EMPTY +SET GLOBAL gtid_binlog_state = @old_state; +RESET MASTER; +SET GLOBAL gtid_binlog_state = @old_state; + +# Check that slave can reconnect again, despite the RESET MASTER, as we +# restored the state. + +CREATE TABLE t1 (a INT PRIMARY KEY); +SET gtid_seq_no=100; +INSERT INTO t1 VALUES (1); +--source include/save_master_gtid.inc + +--connection server_2 +--source include/start_slave.inc +# We cannot just use sync_with_master as we've done RESET MASTER, so +# slave old-style position is wrong. +# So sync on gtid position instead. +--source include/sync_with_master_gtid.inc + +SELECT * FROM t1; +# Check that the IO gtid position in SHOW SLAVE STATUS is also correct. +--let $status_items= Gtid_IO_Pos +--source include/show_slave_status.inc + +--echo *** Test @@LAST_GTID and MASTER_GTID_WAIT() *** + +--connection server_1 +DROP TABLE t1; +CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=InnoDB; +--save_master_pos + +--connection server_2 +--sync_with_master +--source include/stop_slave.inc + +--connect (m1,127.0.0.1,root,,test,$SERVER_MYPORT_1,) +SELECT @@last_gtid; +SET gtid_seq_no=110; +SELECT @@last_gtid; +BEGIN; +SELECT @@last_gtid; +INSERT INTO t1 VALUES (2); +SELECT @@last_gtid; +COMMIT; +SELECT @@last_gtid; +--let $pos= `SELECT @@gtid_binlog_pos` + +--connect (s1,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +eval SET @pos= '$pos'; +# Check NULL argument. +SELECT master_gtid_wait(NULL); +# Check empty argument returns immediately. +SELECT master_gtid_wait('', NULL); +# Check this gets counted +SHOW STATUS LIKE 'Master_gtid_wait_count'; +SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; +SHOW STATUS LIKE 'Master_gtid_wait_time'; +# Let's check that we get a timeout +SELECT master_gtid_wait(@pos, 0.5); +SELECT * FROM t1 ORDER BY a; +# Now actually wait until the slave reaches the position +send SELECT master_gtid_wait(@pos); + +--connection server_2 +--source include/start_slave.inc + +--connection s1 +reap; +SELECT * FROM t1 ORDER BY a; + +# Test waiting on a domain that does not exist yet. +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id= 1; +INSERT INTO t1 VALUES (3); +--let $pos= `SELECT @@gtid_binlog_pos` + +--connection s1 +--replace_result $pos POS +eval SET @pos= '$pos'; +SELECT master_gtid_wait(@pos, 0); +SELECT * FROM t1 WHERE a >= 3; +send SELECT master_gtid_wait(@pos, -1); + +--connection server_2 +--source include/start_slave.inc + +--connection s1 +reap; +SELECT * FROM t1 WHERE a >= 3; +# Waiting for only part of the position. +SELECT master_gtid_wait('1-1-1', 0); + +# Now test a lot of parallel master_gtid_wait() calls, completing in different +# order, and some of which time out or get killed on the way. + +--connection s1 +send SELECT master_gtid_wait('2-1-1,1-1-4,0-1-110'); + +--connect (s2,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +# This will time out. No event 0-1-1000 exists +send SELECT master_gtid_wait('0-1-1000', 0.5); + +--connect (s3,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +# This one we will kill +--let $kill1_id= `SELECT connection_id()` +send SELECT master_gtid_wait('0-1-2000'); + +--connect (s4,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('2-1-10'); + +--connect (s5,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('2-1-6', 1); + +# This one we will kill also. +--connect (s6,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +--let $kill2_id= `SELECT connection_id()` +send SELECT master_gtid_wait('2-1-5'); + +--connect (s7,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('2-1-10'); + +--connect (s8,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('2-1-5,1-1-4,0-1-110'); + +--connect (s9,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('2-1-2'); + +--connection server_2 +# This one completes immediately. +SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; +SHOW STATUS LIKE 'Master_gtid_wait_count'; +SELECT master_gtid_wait('1-1-1'); +SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; +SHOW STATUS LIKE 'Master_gtid_wait_count'; +let $wait_time = query_get_value(SHOW STATUS LIKE 'Master_gtid_wait_time', Value, 1); +--replace_result $wait_time MASTER_GTID_WAIT_TIME +eval SET @a= $wait_time; +SELECT IF(@a <= 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " is larger than expected")) + AS Master_gtid_wait_time_as_expected; + + +--connect (s10,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +send SELECT master_gtid_wait('0-1-109'); + +--connection server_2 +# This one should time out. +SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; +SHOW STATUS LIKE 'Master_gtid_wait_count'; +SELECT master_gtid_wait('2-1-2', 0.5); +SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; +SHOW STATUS LIKE 'Master_gtid_wait_count'; +let $wait_time = query_get_value(SHOW STATUS LIKE 'Master_gtid_wait_time', Value, 1); +--replace_result $wait_time MASTER_GTID_WAIT_TIME +eval SET @a= $wait_time; +# We expect a wait time of just a bit over 0.5 seconds. But thread scheduling +# and timer inaccuracies could introduce significant jitter. So allow a +# generous interval. +SELECT IF(@a BETWEEN 0.4*1000*1000 AND 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " not as expected")) AS Master_gtid_wait_time_as_expected; + +--replace_result $kill1_id KILL_ID +eval KILL QUERY $kill1_id; +--connection s3 +--error ER_QUERY_INTERRUPTED +reap; + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=2; +INSERT INTO t1 VALUES (4); + +--connection s9 +reap; + +--connection server_2 +--replace_result $kill2_id KILL_ID +eval KILL CONNECTION $kill2_id; + +--connection s6 +--error 2013,ER_CONNECTION_KILLED +reap; + +--connection server_1 +SET gtid_domain_id=1; +SET gtid_seq_no=4; +INSERT INTO t1 VALUES (5); +SET gtid_domain_id=2; +SET gtid_seq_no=5; +INSERT INTO t1 VALUES (6); + +--connection s8 +reap; +--connection s1 +reap; +--connection s2 +reap; +--connection s5 +reap; +--connection s10 +reap; + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=10; +INSERT INTO t1 VALUES (7); + +--connection s4 +reap; +--connection s7 +reap; + + +--echo *** Test gtid_slave_pos when used with GTID *** + +--connection server_2 +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=1000; +INSERT INTO t1 VALUES (10); +INSERT INTO t1 VALUES (11); +--save_master_pos + +--connection server_2 +SET sql_slave_skip_counter= 1; +--source include/start_slave.inc +--sync_with_master +SELECT * FROM t1 WHERE a >= 10 ORDER BY a; +SELECT IF(LOCATE("2-1-1001", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1001 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=1010; +INSERT INTO t1 VALUES (12); +INSERT INTO t1 VALUES (13); +--save_master_pos + +--connection server_2 +SET sql_slave_skip_counter= 2; +--source include/start_slave.inc +--sync_with_master +SELECT * FROM t1 WHERE a >= 10 ORDER BY a; +SELECT IF(LOCATE("2-1-1011", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1011 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=1020; +INSERT INTO t1 VALUES (14); +INSERT INTO t1 VALUES (15); +INSERT INTO t1 VALUES (16); +--save_master_pos + +--connection server_2 +SET sql_slave_skip_counter= 3; +--source include/start_slave.inc +--sync_with_master +SELECT * FROM t1 WHERE a >= 10 ORDER BY a; +SELECT IF(LOCATE("2-1-1022", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1022 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id=2; +SET gtid_seq_no=1030; +# Disable logging Annotate_rows events to preserve events count. +let $binlog_annotate_row_events_saved= `SELECT @@binlog_annotate_row_events`; +SET @@binlog_annotate_row_events= 0; +INSERT INTO t1 VALUES (17); +INSERT INTO t1 VALUES (18); +INSERT INTO t1 VALUES (19); +eval SET @@binlog_annotate_row_events= $binlog_annotate_row_events_saved; +--save_master_pos + +--connection server_2 +SET sql_slave_skip_counter= 5; +--source include/start_slave.inc +--sync_with_master +SELECT * FROM t1 WHERE a >= 10 ORDER BY a; +SELECT IF(LOCATE("2-1-1032", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1032 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + + +--source include/stop_slave.inc + +--connection server_1 +SET gtid_domain_id=3; +SET gtid_seq_no=100; +CREATE TABLE t2 (a INT PRIMARY KEY); +DROP TABLE t2; +SET gtid_domain_id=2; +SET gtid_seq_no=1040; +INSERT INTO t1 VALUES (20); +--save_master_pos + +--connection server_2 +SET @saved_mode= @@GLOBAL.slave_ddl_exec_mode; +SET GLOBAL slave_ddl_exec_mode=STRICT; +SET sql_slave_skip_counter=1; +START SLAVE UNTIL master_gtid_pos="3-1-100"; +--let $master_pos=3-1-100 +--source include/sync_with_master_gtid.inc +--source include/wait_for_slave_to_stop.inc +--error ER_NO_SUCH_TABLE +SELECT * FROM t2; +SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +# Start the slave again, it should fail on the DROP TABLE as the table is not there. +SET sql_log_bin=0; +CALL mtr.add_suppression("Slave: Unknown table 'test\\.t2' Error_code: 1051"); +SET sql_log_bin=1; +START SLAVE; +--let $slave_sql_errno=1051 +--source include/wait_for_slave_sql_error.inc +SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +STOP SLAVE IO_THREAD; +SET sql_slave_skip_counter=2; +--source include/start_slave.inc +--sync_with_master + +SELECT * FROM t1 WHERE a >= 20 ORDER BY a; +SELECT IF(LOCATE("3-1-101", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-101 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; +SELECT IF(LOCATE("2-1-1040", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1040 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; + +SET GLOBAL slave_ddl_exec_mode= @saved_mode; + + +--echo *** Test GTID-connecting to a master with out-of-order sequence numbers in the binlog. *** + +# Create an out-of-order binlog on server 2. +# Let server 3 replicate to an out-of-order point, stop it, restart it, +# and check that it replicates correctly despite the out-of-order. + +--connection server_1 +SET gtid_domain_id= @@GLOBAL.gtid_domain_id; +INSERT INTO t1 VALUES (31); +--save_master_pos + +--connection server_2 +--sync_with_master +SET gtid_domain_id= @@GLOBAL.gtid_domain_id; +INSERT INTO t1 VALUES (32); + +--connection server_1 +INSERT INTO t1 VALUES (33); +--save_master_pos + +--connection server_2 +--sync_with_master +--save_master_pos + +--connection server_3 +--sync_with_master +--source include/stop_slave.inc + +--connection server_1 +INSERT INTO t1 VALUES (34); +--save_master_pos + +--connection server_2 +--sync_with_master +--save_master_pos + +--connection server_3 +--source include/start_slave.inc +--sync_with_master +SELECT * FROM t1 WHERE a >= 30 ORDER BY a; +--save_master_pos + +--connection server_4 +--sync_with_master +SELECT * FROM t1 WHERE a >= 30 ORDER BY a; + + +# Clean up. +--connection server_1 +DROP TABLE t1; + + +--source include/rpl_end.inc --echo # --echo # Start of 10.2 tests diff --git a/mysql-test/suite/rpl/t/rpl_gtid_stop_start.test b/mysql-test/suite/rpl/t/rpl_gtid_stop_start.test index 7fb457f6d7f..9760d4df00c 100644 --- a/mysql-test/suite/rpl/t/rpl_gtid_stop_start.test +++ b/mysql-test/suite/rpl/t/rpl_gtid_stop_start.test @@ -2,10 +2,10 @@ if (`SELECT $PS_PROTOCOL != 0`) { --skip Test temporarily disabled for ps-protocol } +--source include/no_valgrind_without_big.inc --let $rpl_topology=1->2 --source include/rpl_init.inc --source include/have_innodb.inc ---source include/no_valgrind_without_big.inc --echo *** Test normal shutdown/restart of slave server configured as a GTID slave. *** diff --git a/mysql-test/suite/rpl/t/rpl_incident.test b/mysql-test/suite/rpl/t/rpl_incident.test index 4bb6477ca98..75d28d6a6c6 100644 --- a/mysql-test/suite/rpl/t/rpl_incident.test +++ b/mysql-test/suite/rpl/t/rpl_incident.test @@ -1 +1,61 @@ ---source include/rpl_incident.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +--source include/have_debug.inc +--source include/master-slave.inc + +SET @old_binlog_checksum=@@binlog_checksum; +SET GLOBAL BINLOG_CHECKSUM=none; +connection slave; +SET @old_binlog_checksum=@@binlog_checksum; +SET GLOBAL BINLOG_CHECKSUM=none; +connection master; + +--echo **** On Master **** +CREATE TABLE t1 (a INT); + +INSERT INTO t1 VALUES (1),(2),(3); +SELECT * FROM t1; + +set @saved_dbug = @@global.debug_dbug; +SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*'; + +# This will generate an incident log event and store it in the binary +# log before the replace statement. +REPLACE INTO t1 VALUES (4); +--save_master_pos +SELECT * FROM t1; + +set @@global.debug_dbug = @saved_dbug; + +connection slave; +# Wait until SQL thread stops with error LOST_EVENT on master +call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590"); +let $slave_sql_errno= 1590; +let $show_slave_sql_error= 1; +source include/wait_for_slave_sql_error.inc; + +# The 4 should not be inserted into the table, since the incident log +# event should have stop the slave. +--echo **** On Slave **** +SELECT * FROM t1; + +SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1; +START SLAVE; +--sync_with_master + +# Now, we should have inserted the row into the table and the slave +# should be running. We should also have rotated to a new binary log. + +SELECT * FROM t1; +source include/check_slave_is_running.inc; + +connection master; +SET GLOBAL BINLOG_CHECKSUM=@old_binlog_checksum; +DROP TABLE t1; +--sync_slave_with_master +SET GLOBAL BINLOG_CHECKSUM=@old_binlog_checksum; +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_init_slave_errors.test b/mysql-test/suite/rpl/t/rpl_init_slave_errors.test index 6f6ab7e8d7c..46673ea4764 100644 --- a/mysql-test/suite/rpl/t/rpl_init_slave_errors.test +++ b/mysql-test/suite/rpl/t/rpl_init_slave_errors.test @@ -1 +1,96 @@ ---source include/rpl_init_slave_errors.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +###################################################################### +# Some errors that cause the slave SQL thread to stop are not shown in +# the Slave_SQL_Error column of "SHOW SLAVE STATUS". Instead, the error +# is only in the server's error log. +# +# Two failures and their respective reporting are verified: +# +# 1 - Failures during slave thread initialization +# 2 - Failures while processing queries passed through the init_slave +# option. +# +# In order to check the first type of failure, we inject a fault in the +# SQL/IO Threads through SET GLOBAL debug. +# +# To check the second type, we set @@global.init_slave to an invalid +# command thus preventing the initialization of the SQL Thread. +# +# Obs: +# 1 - Note that testing failures while initializing the relay log position +# is hard as the same function is called before the code reaches the point +# that we want to test. +# +# 2 - This test does not target failures that are reported while applying +# events such as duplicate keys, errors while reading the relay-log.bin*, +# etc. Such errors are already checked on other tests. +###################################################################### + +###################################################################### +# Configuring the Environment +###################################################################### +source include/have_debug.inc; +source include/have_log_bin.inc; +source include/master-slave.inc; + +connection slave; + +--disable_warnings +stop slave; +--enable_warnings +reset slave; + +###################################################################### +# Injecting faults in the threads' initialization +###################################################################### +connection slave; + +# Set debug flags on slave to force errors to occur +set @saved_dbug = @@global.debug_dbug; +SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; + +start slave; + +# +# slave is going to stop because of emulated failures +# but there won't be any crashes nor asserts hit. +# +# 1593 = ER_SLAVE_FATAL_ERROR +--let $slave_sql_errno= 1593 +--let $show_slave_sql_error= 1 +--source include/wait_for_slave_sql_error.inc + +call mtr.add_suppression("Failed during slave.* thread initialization"); + +set @@global.debug_dbug = @saved_dbug; + +###################################################################### +# Injecting faults in the init_slave option +###################################################################### +connection slave; + +reset slave; + +SET GLOBAL init_slave= "garbage"; + +start slave; +# 1064 = ER_PARSE_ERROR +--let $slave_sql_errno= 1064 +--let $show_slave_sql_error= 1 +--source include/wait_for_slave_sql_error.inc + +###################################################################### +# Clean up +###################################################################### +SET GLOBAL init_slave= ""; + +# Clean up Last_SQL_Error +--source include/stop_slave_io.inc +RESET SLAVE; +--let $rpl_only_running_threads= 1 +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_lcase_tblnames_rewrite_db.test b/mysql-test/suite/rpl/t/rpl_lcase_tblnames_rewrite_db.test index 9c804d8206a..a27a50d0fc4 100644 --- a/mysql-test/suite/rpl/t/rpl_lcase_tblnames_rewrite_db.test +++ b/mysql-test/suite/rpl/t/rpl_lcase_tblnames_rewrite_db.test @@ -15,8 +15,8 @@ # # (iii) master and slave tables do not differ # --- source include/master-slave.inc -- source include/not_windows.inc +-- source include/master-slave.inc SET SQL_LOG_BIN=0; CREATE DATABASE B37656; diff --git a/mysql-test/suite/rpl/t/rpl_loaddata_local.test b/mysql-test/suite/rpl/t/rpl_loaddata_local.test new file mode 100644 index 00000000000..20962d74e98 --- /dev/null +++ b/mysql-test/suite/rpl/t/rpl_loaddata_local.test @@ -0,0 +1,232 @@ +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# See if "LOAD DATA LOCAL INFILE" is well replicated +# (LOAD DATA LOCAL INFILE is not written to the binlog +# the same way as LOAD DATA INFILE : Append_blocks are smaller). +# In MySQL 4.0 <4.0.12 there were 2 bugs with LOAD DATA LOCAL INFILE : +# - the loaded file was not written entirely to the master's binlog, +# only the first 4KB, 8KB or 16KB usually. +# - the loaded file's first line was not written entirely to the +# master's binlog (1st char was absent) +source include/master-slave.inc; + +create table t1(a int); +let $1=10000; +disable_query_log; +set SQL_LOG_BIN=0; +while ($1) +{ + insert into t1 values(1); + dec $1; +} +set SQL_LOG_BIN=1; +enable_query_log; +let $MYSQLD_DATADIR= `select @@datadir`; +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval select * into outfile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' from t1; +#This will generate a 20KB file, now test LOAD DATA LOCAL +truncate table t1; +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval load data local infile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' into table t1; +--remove_file $MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile +sync_slave_with_master; +select a,count(*) from t1 group by a; +connection master; +drop table t1; +sync_slave_with_master; + +# End of 4.1 tests + +# +# Now let us test how well we replicate LOAD DATA LOCAL in situation when +# we met duplicates in tables to which we are adding rows. +# (It supposed that LOAD DATA LOCAL ignores such errors) +# +connection master; +create table t1(a int); +insert into t1 values (1), (2), (2), (3); +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval select * into outfile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' from t1; +drop table t1; +create table t1(a int primary key); +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval load data local infile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' into table t1; +--remove_file $MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile +SELECT * FROM t1 ORDER BY a; +save_master_pos; +connection slave; +sync_with_master; +SELECT * FROM t1 ORDER BY a; +connection master; +drop table t1; +save_master_pos; +connection slave; +sync_with_master; + + +# +# Bug22504 load data infile sql statement in replication architecture get error +# +--echo ==== Bug22504 Initialize ==== + +--connection master + +SET sql_mode='ignore_space'; +CREATE TABLE t1(a int); +insert into t1 values (1), (2), (3), (4); +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval select * into outfile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' from t1; +truncate table t1; +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval load data local infile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' into table t1; +--remove_file $MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile +SELECT * FROM t1 ORDER BY a; + +sync_slave_with_master; +SELECT * FROM t1 ORDER BY a; + +--echo ==== Clean up ==== + +connection master; +DROP TABLE t1; + +sync_slave_with_master; + +--echo +--echo Bug #43746: +--echo "return wrong query string when parse 'load data infile' sql statement" +--echo + +connection master; +let $MYSQLD_DATADIR= `select @@datadir`; +SELECT @@SESSION.sql_mode INTO @old_mode; + +SET sql_mode='ignore_space'; + +CREATE TABLE t1(a int); +INSERT INTO t1 VALUES (1), (2), (3), (4); + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval SELECT * INTO OUTFILE '$MYSQLD_DATADIR/bug43746.sql' FROM t1; +TRUNCATE TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql' INTO TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD/* look mum, with comments in weird places! */DATA/* oh hai */LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql'/* we are */INTO/* from the internets */TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA/*!10000 LOCAL */INFILE '$MYSQLD_DATADIR/bug43746.sql' INTO TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql' /*!10000 INTO */ TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql' /*!10000 INTO TABLE */ t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA /*!10000 LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql' INTO TABLE */ t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA/*!10000 LOCAL */INFILE '$MYSQLD_DATADIR/bug43746.sql'/*!10000 INTO*/TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA/*!10000 LOCAL */INFILE '$MYSQLD_DATADIR/bug43746.sql'/* empty */INTO TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA/*!10000 LOCAL */INFILE '$MYSQLD_DATADIR/bug43746.sql' INTO/* empty */TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD/*!999999 special comments that do not expand */DATA/*!999999 code from the future */LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql'/*!999999 have flux capacitor */INTO/*!999999 will travel */TABLE t1; + +SET sql_mode='PIPES_AS_CONCAT,ANSI_QUOTES,NO_KEY_OPTIONS,NO_TABLE_OPTIONS,NO_FIELD_OPTIONS,STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,TRADITIONAL,NO_AUTO_CREATE_USER'; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug43746.sql' INTO TABLE t1; + +sync_slave_with_master; + +--echo +--echo Bug #59267: +--echo "LOAD DATA LOCAL INFILE not executed on slave with SBR" +--echo + +connection master; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval SELECT * INTO OUTFILE '$MYSQLD_DATADIR/bug59267.sql' FROM t1; +TRUNCATE TABLE t1; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug59267.sql' INTO TABLE t1; + +SELECT 'Master', COUNT(*) FROM t1; + +--sync_slave_with_master +SELECT 'Slave', COUNT(*) FROM t1; + +# cleanup +connection master; + +--remove_file $MYSQLD_DATADIR/bug43746.sql +--remove_file $MYSQLD_DATADIR/bug59267.sql + +DROP TABLE t1; +SET SESSION sql_mode=@old_mode; + +sync_slave_with_master; + +connection master; + +--echo +--echo Bug #60580/#11902767: +--echo "statement improperly replicated crashes slave sql thread" +--echo + +connection master; +let $MYSQLD_DATADIR= `select @@datadir`; + +CREATE TABLE t1(f1 INT, f2 INT); +CREATE TABLE t2(f1 INT, f2 TIMESTAMP); + +INSERT INTO t2 VALUES(1, '2011-03-22 21:01:28'); +INSERT INTO t2 VALUES(2, '2011-03-21 21:01:28'); +INSERT INTO t2 VALUES(3, '2011-03-20 21:01:28'); + +CREATE TABLE t3 AS SELECT * FROM t2; + +CREATE VIEW v1 AS SELECT * FROM t2 + WHERE f1 IN (SELECT f1 FROM t3 WHERE (t3.f2 IS NULL)); + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval SELECT 1 INTO OUTFILE '$MYSQLD_DATADIR/bug60580.csv' FROM DUAL; + +--replace_result $MYSQLD_DATADIR MYSQLD_DATADIR +eval LOAD DATA LOCAL INFILE '$MYSQLD_DATADIR/bug60580.csv' INTO TABLE t1 (@f1) SET f2 = (SELECT f1 FROM v1 WHERE f1=@f1); + +SELECT * FROM t1; + +sleep 1; + +sync_slave_with_master; + +SELECT * FROM t1; + +--remove_file $MYSQLD_DATADIR/bug60580.csv + +connection master; + +DROP VIEW v1; +DROP TABLE t1, t2, t3; + +sync_slave_with_master; + +connection master; +--source include/rpl_end.inc + +--echo # End of 5.1 tests diff --git a/mysql-test/suite/rpl/t/rpl_loaddatalocal.test b/mysql-test/suite/rpl/t/rpl_loaddatalocal.test deleted file mode 100644 index 712041467ab..00000000000 --- a/mysql-test/suite/rpl/t/rpl_loaddatalocal.test +++ /dev/null @@ -1 +0,0 @@ ---source include/rpl_loaddata_local.inc diff --git a/mysql-test/suite/rpl/t/rpl_loadfile.test b/mysql-test/suite/rpl/t/rpl_loadfile.test index 10fecf1f653..9cd64530690 100644 --- a/mysql-test/suite/rpl/t/rpl_loadfile.test +++ b/mysql-test/suite/rpl/t/rpl_loadfile.test @@ -1 +1,120 @@ ---source include/rpl_loadfile.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +############################################################################# +# Original Author: JBM # +# Original Date: Aug/18/2005 # +############################################################################# +# TEST: To test the LOAD_FILE() in rbr # +############################################################################# +# Change Author: JBM +# Change Date: 2006-01-16 +########## + +# Includes +-- source include/have_binlog_format_mixed_or_row.inc +-- source include/master-slave.inc + +-- source suite/rpl/include/rpl_loadfile.test + +# BUG#39701: Mixed binlog format does not switch to row mode on LOAD_FILE +# +# DESCRIPTION +# +# Problem: when using load_file string function and mixed binlogging format +# there was no switch to row based binlogging format. This leads +# to scenarios on which the slave replicates the statement and it +# will try to load the file from local file system, which in most +# likely it will not exist. +# +# Solution: +# Marking this function as unsafe for statement format, makes the +# statement using it to be logged in row based format. As such, data +# replicated from the master, becomes the content of the loaded file. +# Consequently, the slave receives the necessary data to complete +# the load_file instruction correctly. +# +# IMPLEMENTATION +# +# The test is implemented as follows: +# +# On Master, +# i) write to file the desired content. +# ii) create table and stored procedure with load_file +# iii) stop slave +# iii) execute load_file +# iv) remove file +# +# On Slave, +# v) start slave +# vi) sync it with master so that it gets the updates from binlog (which +# should have bin logged in row format). +# +# If the the binlog format does not change to row, then the assertion +# done in the following step fails. This happens because tables differ +# since the file does not exist anymore, meaning that when slave +# attempts to execute LOAD_FILE statement it inserts NULL on table +# instead of the same contents that the master loaded when it executed +# the procedure (which was executed when file existed). +# +# vii) assert that the contents of master and slave +# table are the same + +--source include/rpl_reset.inc + +connection master; +let $file= $MYSQLTEST_VARDIR/tmp/bug_39701.data; + +--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +--eval SELECT repeat('x',20) INTO OUTFILE '$file' + +disable_warnings; +DROP TABLE IF EXISTS t1; +enable_warnings; + +CREATE TABLE t1 (t text); +DELIMITER |; +CREATE PROCEDURE p(file varchar(4096)) + BEGIN + INSERT INTO t1 VALUES (LOAD_FILE(file)); + END| +DELIMITER ;| + +# stop slave before issuing the load_file on master +connection slave; +source include/stop_slave.inc; + +connection master; + +# test: check that logging falls back to rbr. +--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR +--eval CALL p('$file') + +# test: remove the file from the filesystem and assert that slave still +# gets the loaded file +remove_file $file; + +# now that the file is removed it is safe (regarding what we want to test) +# to start slave +connection slave; +source include/start_slave.inc; + +connection master; +sync_slave_with_master; + +# assertion: assert that the slave got the updates even +# if the file was removed before the slave started, +# meaning that contents were indeed transfered +# through binlog (in row format) +let $diff_tables= master:t1, slave:t1; +source include/diff_tables.inc; + +# CLEAN UP +--connection master +DROP TABLE t1; +DROP PROCEDURE p; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_mdev12179.test b/mysql-test/suite/rpl/t/rpl_mdev12179.test index c8b9e665747..aa0d05211ff 100644 --- a/mysql-test/suite/rpl/t/rpl_mdev12179.test +++ b/mysql-test/suite/rpl/t/rpl_mdev12179.test @@ -1,7 +1,7 @@ +--source include/no_valgrind_without_big.inc --source include/have_innodb.inc --let $rpl_topology=1->2 --source include/rpl_init.inc ---source include/no_valgrind_without_big.inc --connection server_2 call mtr.add_suppression("The automatically created table.*name may not be entirely in lowercase"); diff --git a/mysql-test/suite/rpl/t/rpl_mdev382.test b/mysql-test/suite/rpl/t/rpl_mdev382.test index 093b7b92413..84e3c84982d 100644 --- a/mysql-test/suite/rpl/t/rpl_mdev382.test +++ b/mysql-test/suite/rpl/t/rpl_mdev382.test @@ -1,7 +1,7 @@ +--source include/not_windows.inc #unix shell escaping used for mysqlbinlog --source include/have_innodb.inc --source include/have_binlog_format_statement.inc --source include/master-slave.inc ---source include/not_windows.inc #unix shell escaping used for mysqlbinlog # MDEV-382: multiple SQL injections in replication code. diff --git a/mysql-test/suite/rpl/t/rpl_packet.test b/mysql-test/suite/rpl/t/rpl_packet.test index 1bf99c2366b..cbde486bcbb 100644 --- a/mysql-test/suite/rpl/t/rpl_packet.test +++ b/mysql-test/suite/rpl/t/rpl_packet.test @@ -1 +1,184 @@ ---source include/rpl_packet.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# ==== Purpose ==== +# +# Check replication protocol packet size handling +# +# ==== Related bugs ==== +# Bug#19402 SQL close to the size of the max_allowed_packet fails on slave +# BUG#23755: Replicated event larger that max_allowed_packet infinitely re-transmits +# BUG#42914: No LAST_IO_ERROR for max_allowed_packet errors +# BUG#55322: SHOW BINLOG EVENTS increases @@SESSION.MAX_ALLOWED_PACKET + +# max-out size db name +source include/have_binlog_format_row.inc; +source include/master-slave.inc; + +call mtr.add_suppression("Slave I/O: Got a packet bigger than 'slave_max_allowed_packet' bytes, .*error.* 1153"); +call mtr.add_suppression("Log entry on master is longer than slave_max_allowed_packet"); +let $db= DB_NAME_OF_MAX_LENGTH_AKA_NAME_LEN_64_BYTES_____________________; +disable_warnings; +eval drop database if exists $db; +enable_warnings; +eval create database $db; + +connection master; +let $old_max_allowed_packet= `SELECT @@global.max_allowed_packet`; +let $old_net_buffer_length= `SELECT @@global.net_buffer_length`; +let $old_slave_max_allowed_packet= `SELECT @@global.slave_max_allowed_packet`; +SET @@global.max_allowed_packet=1024; +SET @@global.net_buffer_length=1024; + +sync_slave_with_master; +# Restart slave for setting to take effect +source include/stop_slave.inc; +source include/start_slave.inc; + +# Reconnect to master for new setting to take effect +disconnect master; + +# alas, can't use eval here; if db name changed apply the change here +connect (master,localhost,root,,DB_NAME_OF_MAX_LENGTH_AKA_NAME_LEN_64_BYTES_____________________); + +connection master; +select @@net_buffer_length, @@max_allowed_packet; + +create table `t1` (`f1` LONGTEXT) ENGINE=MyISAM; + +INSERT INTO `t1`(`f1`) VALUES ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa1023'); +sync_slave_with_master; + +eval select count(*) from `$db`.`t1` /* must be 1 */; + +SHOW STATUS LIKE 'Slave_running'; +select * from information_schema.session_status where variable_name= 'SLAVE_RUNNING'; +connection master; +eval drop database $db; +sync_slave_with_master; + +# +# Bug #23755: Replicated event larger that max_allowed_packet infinitely re-transmits +# +# Check that a situation when the size of event on the master is greater than +# max_allowed_packet on the slave does not lead to infinite re-transmits. + +connection master; + +# Change the max packet size on master + +SET @@global.max_allowed_packet=4096; +SET @@global.net_buffer_length=4096; + +# Restart slave for new setting to take effect +connection slave; +source include/stop_slave.inc; +source include/start_slave.inc; + +# Reconnect to master for new setting to take effect +disconnect master; +connect (master, localhost, root); +connection master; + +CREATE TABLE `t1` (`f1` LONGTEXT) ENGINE=MyISAM; + +sync_slave_with_master; + +connection master; + +INSERT INTO `t1`(`f1`) VALUES ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa2048'); + + +# +# Bug#42914: The slave I/O thread must stop after trying to read the above +# event, However there is no Last_IO_Error report. +# + +# The slave I/O thread must stop after trying to read the above event +connection slave; +# 1153 = ER_NET_PACKET_TOO_LARGE +--let $slave_io_errno= 1153 +--let $show_slave_io_error= 1 +--source include/wait_for_slave_io_error.inc + +# TODO: this is needed because of BUG#55790. Remove once that is fixed. +--source include/stop_slave_sql.inc + +# +# Bug#42914: On the master, if a binary log event is larger than +# max_allowed_packet, the error message ER_MASTER_FATAL_ERROR_READING_BINLOG +# is sent to a slave when it requests a dump from the master, thus leading the +# I/O thread to stop. However, there is no Last_IO_Error reported. +# + +--let $rpl_only_running_threads= 1 +--source include/rpl_reset.inc +--connection master +DROP TABLE t1; +--sync_slave_with_master + + +connection master; +CREATE TABLE t1 (f1 int PRIMARY KEY, f2 LONGTEXT, f3 LONGTEXT) ENGINE=MyISAM; +sync_slave_with_master; + +connection master; +INSERT INTO t1(f1, f2, f3) VALUES(1, REPEAT('a', @@global.max_allowed_packet), REPEAT('b', @@global.max_allowed_packet)); + +connection slave; +# The slave I/O thread must stop after receiving +# 1153 = ER_NET_PACKET_TOO_LARGE +--let $slave_io_errno= 1153 +--let $show_slave_io_error= 1 +--source include/wait_for_slave_io_error.inc + +# Remove the bad binlog and clear error status on slave. +STOP SLAVE; +RESET SLAVE; +--connection master +RESET MASTER; + + +# +# BUG#55322: SHOW BINLOG EVENTS increases @@SESSION.MAX_ALLOWED_PACKET +# +# In BUG#55322, @@session.max_allowed_packet increased each time SHOW +# BINLOG EVENTS was issued. To verify that this bug is fixed, we +# execute SHOW BINLOG EVENTS twice and check that max_allowed_packet +# never changes. We turn off the result log because we don't care +# about the contents of the binlog. + +--disable_result_log +SET @max_allowed_packet_0= @@session.max_allowed_packet; +SHOW BINLOG EVENTS; +SET @max_allowed_packet_1= @@session.max_allowed_packet; +SHOW BINLOG EVENTS; +SET @max_allowed_packet_2= @@session.max_allowed_packet; +--enable_result_log +if (`SELECT NOT(@max_allowed_packet_0 = @max_allowed_packet_1 AND @max_allowed_packet_1 = @max_allowed_packet_2)`) +{ + --echo ERROR: max_allowed_packet changed after executing SHOW BINLOG EVENTS + --source include/show_rpl_debug_info.inc + SELECT @max_allowed_packet_0, @max_allowed_packet_1, @max_allowed_packet_2; + --die @max_allowed_packet changed after executing SHOW BINLOG EVENTS +} + + +--echo ==== clean up ==== +connection master; +DROP TABLE t1; +eval SET @@global.max_allowed_packet= $old_max_allowed_packet; +eval SET @@global.net_buffer_length= $old_net_buffer_length; +eval SET @@global.slave_max_allowed_packet= $old_slave_max_allowed_packet; +# slave is stopped +connection slave; +DROP TABLE t1; + +# Clear Last_IO_Error +RESET SLAVE; + +--source include/rpl_end.inc +# End of tests diff --git a/mysql-test/suite/rpl/t/rpl_parallel_ignored_errors.test b/mysql-test/suite/rpl/t/rpl_parallel_ignored_errors.test index 90f09a76546..493385f1ae3 100644 --- a/mysql-test/suite/rpl/t/rpl_parallel_ignored_errors.test +++ b/mysql-test/suite/rpl/t/rpl_parallel_ignored_errors.test @@ -1 +1,115 @@ ---source include/rpl_parallel_ignored_errors.inc +# ==== Purpose ==== +# +# Test verifies that, in parallel replication, transaction failure notification +# is propagated to all the workers. Workers should abort the execution of +# transaction event groups, whose event positions are higher than the failing +# transaction group. +# +# ==== Implementation ==== +# +# Steps: +# 0 - Create a table t1 on master which has a primary key. Enable parallel +# replication on slave with slave_parallel_mode='optimistic' and +# slave_parallel_threads=3. +# 1 - On slave start a transaction and execute a local INSERT statement +# which will insert value 32. This is done to block the INSERT coming +# from master. +# 2 - On master execute an INSERT statement with value 32, so that it is +# blocked on slave. +# 3 - On slave enable a debug sync point such that it holds the worker thread +# execution as soon as work is scheduled to it. +# 4 - INSERT value 33 on master. It will be held on slave by other worker +# thread due to debug simulation. +# 5 - INSERT value 34 on master. +# 6 - On slave, enusre that INSERT 34 has reached a state where it waits for +# its prior transactions to commit. +# 7 - Commit the local INSERT 32 on slave server so that first worker will +# error out. +# 8 - Now send a continue signal to second worker processing 33. It should +# wakeup and propagate the error to INSERT 34. +# 9 - Upon slave stop due to error, check that no rows are found after the +# failed INSERT 32. +# +# ==== References ==== +# +# MDEV-20645: Replication consistency is broken as workers miss the error +# notification from an earlier failed group. +# + +--source include/have_innodb.inc +--source include/have_debug.inc +--source include/have_debug_sync.inc +--source include/have_binlog_format_statement.inc +--source include/master-slave.inc + +--enable_connect_log +--connection server_2 +--source include/stop_slave.inc +SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; +SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode; +SET @old_debug= @@GLOBAL.debug_dbug; +SET GLOBAL slave_parallel_mode='optimistic'; +SET GLOBAL slave_parallel_threads= 3; +CHANGE MASTER TO master_use_gtid=slave_pos; +CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends"); +--source include/start_slave.inc + +--connection server_1 +ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB; +CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=InnoDB; +# MDEV-515 takes X-lock on the table for the first insert. +# So concurrent insert won't happen on the table +INSERT INTO t1 VALUES(1); +--source include/save_master_gtid.inc + +--connection server_2 +--source include/sync_with_master_gtid.inc + +--connect (con_temp2,127.0.0.1,root,,test,$SERVER_MYPORT_2,) +BEGIN; +INSERT INTO t1 VALUES (32); + +--connection server_1 +INSERT INTO t1 VALUES (32); + +--connection server_2 +--let $wait_condition= SELECT COUNT(*) = 1 FROM information_schema.processlist WHERE info like "INSERT INTO t1 VALUES (32)" +--source include/wait_condition.inc +SET GLOBAL debug_dbug="+d,hold_worker_on_schedule"; +SET debug_sync="debug_sync_action SIGNAL reached_pause WAIT_FOR continue_worker"; + +--connection server_1 +SET gtid_seq_no=100; +INSERT INTO t1 VALUES (33); + +--connection server_2 +SET debug_sync='now WAIT_FOR reached_pause'; + +--connection server_1 +INSERT INTO t1 VALUES (34); + +--connection server_2 +--let $wait_condition= SELECT COUNT(*) = 1 FROM information_schema.processlist WHERE state like "Waiting for prior transaction to commit" +--source include/wait_condition.inc +--connection con_temp2 +COMMIT; + +# Clean up. +--connection server_2 +--source include/stop_slave.inc +--let $assert_cond= COUNT(*) = 0 FROM t1 WHERE a>32 +--let $assert_text= table t1 should have zero rows where a>32 +--source include/assert.inc +SELECT * FROM t1 WHERE a>32; +DELETE FROM t1 WHERE a=32; + +SET GLOBAL slave_parallel_threads=@old_parallel_threads; +SET GLOBAL slave_parallel_mode=@old_parallel_mode; +SET GLOBAL debug_dbug=@old_debug; +SET DEBUG_SYNC= 'RESET'; +--source include/start_slave.inc + +--connection server_1 +DROP TABLE t1; +--disable_connect_log +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_parallel_optimistic_error_stop.test b/mysql-test/suite/rpl/t/rpl_parallel_optimistic_error_stop.test new file mode 100644 index 00000000000..27f38d47bdb --- /dev/null +++ b/mysql-test/suite/rpl/t/rpl_parallel_optimistic_error_stop.test @@ -0,0 +1,180 @@ +--source include/have_innodb.inc +--source include/have_debug.inc +--source include/have_debug_sync.inc +--let $rpl_topology=1->2 +--source include/rpl_init.inc + +call mtr.add_suppression("Slave: Commit failed due to failure of an earlier commit"); +call mtr.add_suppression("Slave: Duplicate entry '99'"); + +--connection server_1 +ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB; +CREATE TABLE t1 (a int PRIMARY KEY, b INT) ENGINE=InnoDB; +INSERT INTO t1 VALUES(1,1); # hit a dup entry on slave +INSERT INTO t1 VALUES(2,1); # races to "win" the last exit +INSERT INTO t1 VALUES(3,1); +INSERT INTO t1 VALUES(4,1); # make W3 race over W1 +--save_master_pos + +--connection server_2 +--sync_with_master +SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; +--source include/stop_slave.inc +SET @old_debug_dbug = @@global.debug_dbug; +# In a group of W1,W2,W3 of the same batch W2 simulates slowness. +SET @@global.debug_dbug = "d,hold_worker2_favor_worker3"; +SET GLOBAL slave_parallel_threads=4; +CHANGE MASTER TO master_use_gtid=slave_pos; +SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode; +SET GLOBAL slave_parallel_mode='optimistic'; + +# MDEV-30780 optimistic parallel slave hangs after hit an error +# Test workers hang scenario to prove it's no more neither +# out-of-order access to the active gco list. +# +# The test provides how to reproduce on the OLD version, false by default. +# That branch approximates the original hang with an assert that +# confirms the OLD version indeed could access already reclaimed gco. +--let $old_version_regression=0 + + +--connection server_1 + +# Let W1,W2,W3,W4 parallel workers that are going to execute +# the following transaction. +# W1 holds on with the 1st statement +# then crashes W3 with the 2nd into retry, +# finally hits with the 3rd a dup entry, on slave. +SET @@gtid_seq_no = 2001; +BEGIN; + UPDATE t1 SET b = 11 WHERE a = 4; + UPDATE t1 SET b = 11 WHERE a = 3; + UPDATE t1 SET a = 99 WHERE a = 1; +COMMIT; +# In the buggy version W2 races to "win" the exit last (of W1..3) +# and by that to access last a gco struct, garbage-collected. +UPDATE t1 SET b = 2 WHERE a = 2; +# W3 garbage-collects the gco struct in the buggy version. +UPDATE t1 SET b = 3 WHERE a = 3; +# W4 resides in following "singleton" batch to a W2 replacement +# in the buggy version to allow W3 reclaim the batch's gco. +DROP TABLE IF EXISTS phantom_1; + +--source include/save_master_gtid.inc + +--connect (slave_local_0, 127.0.0.1, root,, test, $SLAVE_MYPORT,) +begin; + UPDATE t1 set b = 11 where a = 4; +--connect (slave_local_1, 127.0.0.1, root,, test, $SLAVE_MYPORT,) +begin; + INSERT INTO t1 VALUES (99, 11); + +--connect (slave_local_2, 127.0.0.1, root,, test, $SLAVE_MYPORT,) +begin; + UPDATE t1 SET b = 12 WHERE a = 2; + +--connect (slave_local_3, 127.0.0.1, root,, test, $SLAVE_MYPORT,) +begin; + UPDATE t1 SET b = 13 WHERE a = 3; + +--connection server_2 +--source include/start_slave.inc + +--echo # W4 is waiting to start its DROP + +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to start commit%" +--source include/wait_condition.inc + +--connection slave_local_3 +# make W3 to set E.cc <- 1 + rollback; +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit%" +--source include/wait_condition.inc + +--connection slave_local_0 +# make W3 into retry and delay it to let W1 hit a dupicate error first, +# see 'commit' by slave_local_1. + rollback; +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "debug sync point: now" +--source include/wait_condition.inc +SELECT count(*) = 0 as "W3 undid its commit state" FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit%"; + + +--connection slave_local_2 + rollback; +# wait for W2 to start committing E.cc <- 2 +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state like "Waiting for prior transaction to commit" +--source include/wait_condition.inc + +--connection slave_local_1 + +# W1 errors out +# A. to alert W3 +# B. W3 will *not* wake up W4 in the fixed version, having to wait for W2 demise. +# C. W2 will notify W3 that releases W4 as it would do in normal cases. +commit; + +if (!$old_version_regression) +{ +# A. In the fixed version show-processlist W4 is still in the ordered waiting +SELECT COUNT(*) = 1 as "W4 remains with the same status" FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to start commit%"; +--let $status= query_get_value("show slave status", Slave_SQL_Running, 1) +--echo # Slave_SQL_Running YES = $status + +# B. In the fixed version W3 is waiting for W2,... +--let $wait_condition= SELECT count(*) = 1 as "W4 is waiting" FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit%" +--source include/wait_condition.inc +--echo # while W2 is held back ... +--let $wait_condition= SELECT count(*) = 1 as "W2 simulates slowness" FROM information_schema.processlist WHERE state LIKE "debug sync point: now" +--source include/wait_condition.inc + +# C. # ...until NOW. +SET DEBUG_SYNC = 'now SIGNAL cont_worker2'; + +} + +# To reproduce the hang on the OLD version ... +if ($old_version_regression) +{ + # replace the actual fixes block with checking W3,W4 have actually committed, + # followed by signaling to W2 like on behalf of W4 which would end up in the hang. + --let $wait_condition= SELECT COUNT(*) = 0 as "W4 has moved on" FROM information_schema.processlist WHERE state like "Waiting for prior transaction to start commit" + --source include/wait_condition.inc + --let $wait_condition= SELECT count(*) = 0 as "W3 does not wait on W2" FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit%" +--source include/wait_condition.inc + + --let $wait_condition= SELECT count(*) = 1 as "W2 simulates slowness" FROM information_schema.processlist WHERE state LIKE "debug sync point: now" + --source include/wait_condition.inc + + # Like above, but signaling is done after W4 is done to violate the commit order + # that must fire a debug assert. + SET DEBUG_SYNC = 'now SIGNAL cont_worker2'; +} + +--let $slave_sql_errno= 1062 +--source include/wait_for_slave_sql_error.inc + +# Restore the slave data and resume with replication +DELETE FROM t1 WHERE a=99; +--source include/start_slave.inc +--source include/sync_with_master_gtid.inc + +# +# Clean up. +# +--connection server_2 +--source include/stop_slave.inc +SET GLOBAL slave_parallel_mode=@old_parallel_mode; +SET GLOBAL slave_parallel_threads=@old_parallel_threads; +SET @@global.debug_dbug = @old_debug_dbug; +SET debug_sync = RESET; +--source include/start_slave.inc + +--connection server_1 +DROP TABLE t1; +--source include/save_master_gtid.inc + +--connection server_2 +--source include/sync_with_master_gtid.inc + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_parallel_seq.test b/mysql-test/suite/rpl/t/rpl_parallel_seq.test new file mode 100644 index 00000000000..2a4fd96ff34 --- /dev/null +++ b/mysql-test/suite/rpl/t/rpl_parallel_seq.test @@ -0,0 +1,131 @@ +--source include/have_innodb.inc +--source include/have_debug.inc +--source include/have_debug_sync.inc +--source include/have_binlog_format_row.inc +--source include/master-slave.inc + +--connection slave +--source include/stop_slave.inc +ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB; + +--echo # MDEV-29621 the sequence engine binlog_row_image-full events +--echo # MDL-deadlock on the parallel slave. +--connection master +CREATE SEQUENCE s1; +SET @@session.binlog_row_image=FULL; +SET @@session.debug_dbug="+d,binlog_force_commit_id"; +SET @commit_id=7; +SET @@gtid_seq_no=100; +SELECT NEXT VALUE FOR s1; +INSERT INTO s1 VALUES(2, 1, 10, 1, 2, 1, 1, 0); +SET @@session.debug_dbug=""; + +--connection slave +--let $slave_parallel_threads=`select @@global.slave_parallel_threads` +--let $slave_parallel_mode=`select @@global.slave_parallel_mode` +SET @@global.slave_parallel_threads=2; +SET @@global.slave_parallel_mode=optimistic; +SET @@global.debug_dbug="+d,hold_worker_on_schedule"; +--source include/start_slave.inc + +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to start commit" +--source include/wait_condition.inc +SET DEBUG_SYNC = 'now SIGNAL continue_worker'; + +--connection master +DROP SEQUENCE s1; +--sync_slave_with_master +--source include/stop_slave.inc + +--echo # Simulate buggy 10.3.36 master to prove the parallel applier +--echo # does not deadlock now at replaying the above master load. +--connection master +--let $datadir= `SELECT @@datadir` + +--let $rpl_server_number= 1 +--source include/rpl_stop_server.inc + +--remove_file $datadir/master-bin.000001 +--copy_file $MYSQL_TEST_DIR/std_data/rpl/master-bin-seq_10.3.36.000001 $datadir/master-bin.000001 + +--let $rpl_server_number= 1 +--source include/rpl_start_server.inc + +--source include/wait_until_connected_again.inc +--save_master_pos + +--connection slave +RESET MASTER; +SET @@global.gtid_slave_pos=""; + +--replace_result $SERVER_MYPORT_1 SERVER_MYPORT_1 +eval CHANGE MASTER TO master_host='127.0.0.1', master_port=$SERVER_MYPORT_1, master_user='root', master_use_gtid=slave_pos; + +START SLAVE UNTIL MASTER_GTID_POS='0-1-102'; + +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit" +--source include/wait_condition.inc +SET DEBUG_SYNC = 'now SIGNAL continue_worker'; + +--echo # Normal stop is expected +--source include/wait_for_slave_to_stop.inc + +--echo # MDEV-31077 ALTER SEQUENCE may end up in optimistic parallel slave binlog out-of-order +--echo # The test proves ALTER-SEQUENCE binlogs first before the following transaction does so. + +--connection slave +--source include/stop_slave.inc +RESET MASTER; +SET @@global.gtid_slave_pos=""; +--let $slave_gtid_strict_mode=`select @@global.gtid_strict_mode` +SET @@global.gtid_strict_mode=1; +--connection master +RESET MASTER; + +# Load from master +CREATE TABLE ti (a INT) ENGINE=innodb; +CREATE SEQUENCE s2 ENGINE=innodb; + +SET @@gtid_seq_no=100; +ALTER SEQUENCE s2 restart with 1; +INSERT INTO ti SET a=1; +--source include/save_master_gtid.inc +SELECT @@global.gtid_binlog_state "Master gtid state"; + +--connection slave +--source include/start_slave.inc + +--let $wait_condition= SELECT count(*) = 1 FROM information_schema.processlist WHERE state LIKE "Waiting for prior transaction to commit" +--source include/wait_condition.inc + +SELECT @@global.gtid_binlog_state, @@global.gtid_slave_pos as "no 100,101 yet in both"; + +# DEBUG_DBUG extension point of hold_worker_on_schedule is reused +# (gets deployed) in Sql_cmd_alter_sequence::execute. +SET DEBUG_SYNC = 'now SIGNAL continue_worker'; + +--echo # Normal sync with master proves the fixes correct +--source include/sync_with_master_gtid.inc + +SELECT @@global.gtid_binlog_state, @@global.gtid_slave_pos as "all through 101 have been committed"; + +# +# MDEV-29621/MDEV-31077 clean up. +# +--connection slave +--source include/stop_slave.inc + +SET debug_sync = RESET; +--eval SET @@global.slave_parallel_threads= $slave_parallel_threads +--eval SET @@global.slave_parallel_mode= $slave_parallel_mode + SET @@global.debug_dbug = ""; +--eval SET @@global.gtid_strict_mode=$slave_gtid_strict_mode +--source include/start_slave.inc + +--connection master +DROP SEQUENCE s2; +DROP TABLE ti; + +--sync_slave_with_master + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_parallel_show_binlog_events_purge_logs.test b/mysql-test/suite/rpl/t/rpl_parallel_show_binlog_events_purge_logs.test index 8c8892d5370..cddc9286bd2 100644 --- a/mysql-test/suite/rpl/t/rpl_parallel_show_binlog_events_purge_logs.test +++ b/mysql-test/suite/rpl/t/rpl_parallel_show_binlog_events_purge_logs.test @@ -1 +1,38 @@ ---source include/rpl_parallel_show_binlog_events_purge_logs.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# BUG#13979418: SHOW BINLOG EVENTS MAY CRASH THE SERVER +# +# The function mysql_show_binlog_events has a local stack variable +# 'LOG_INFO linfo;', which is assigned to thd->current_linfo, however +# this variable goes out of scope and is destroyed before clean +# thd->current_linfo. +# +# This test case runs SHOW BINLOG EVENTS and FLUSH LOGS to make sure +# that with the fix local variable linfo is valid along all +# mysql_show_binlog_events function scope. +# +--source include/have_debug.inc +--source include/have_debug_sync.inc +--source include/master-slave.inc + +--connection slave +SET DEBUG_SYNC= 'after_show_binlog_events SIGNAL on_show_binlog_events WAIT_FOR end'; +--send SHOW BINLOG EVENTS + +--connection slave1 +SET DEBUG_SYNC= 'now WAIT_FOR on_show_binlog_events'; +FLUSH LOGS; +SET DEBUG_SYNC= 'now SIGNAL end'; + +--connection slave +--disable_result_log +--reap +--enable_result_log +SET DEBUG_SYNC= 'RESET'; + +--connection master +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_relayrotate.test b/mysql-test/suite/rpl/t/rpl_relayrotate.test index 720739e14c0..4de554d3143 100644 --- a/mysql-test/suite/rpl/t/rpl_relayrotate.test +++ b/mysql-test/suite/rpl/t/rpl_relayrotate.test @@ -1 +1,18 @@ ---source include/rpl_relayrotate.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +####################################################### +# Wrapper for rpl_relayrotate.test to allow multi # +# Engines to reuse test code. By JBM 2006-02-15 # +####################################################### +-- source include/have_innodb.inc +# Slow test, don't run during staging part +-- source include/not_staging.inc +-- source include/master-slave.inc + +let $engine_type=innodb; +-- source suite/rpl/include/rpl_relayrotate.test +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_row_lcase_tblnames.test b/mysql-test/suite/rpl/t/rpl_row_lcase_tblnames.test index 44c04dd62d3..7decd130a43 100644 --- a/mysql-test/suite/rpl/t/rpl_row_lcase_tblnames.test +++ b/mysql-test/suite/rpl/t/rpl_row_lcase_tblnames.test @@ -3,10 +3,10 @@ # For details look into extra/rpl_tests/rpl_lower_case_table_names.test # --- source include/master-slave.inc --- source include/have_innodb.inc -- source include/not_windows.inc +-- source include/have_innodb.inc -- source include/have_binlog_format_row.inc +-- source include/master-slave.inc -- let $engine=InnoDB -- source include/rpl_lower_case_table_names.test diff --git a/mysql-test/suite/rpl/t/rpl_semi_sync.test b/mysql-test/suite/rpl/t/rpl_semi_sync.test index 5c17bcb2344..720ec059350 100644 --- a/mysql-test/suite/rpl/t/rpl_semi_sync.test +++ b/mysql-test/suite/rpl/t/rpl_semi_sync.test @@ -1 +1,532 @@ ---source include/rpl_semi_sync.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +source include/not_embedded.inc; +source include/have_innodb.inc; +source include/master-slave.inc; + +let $engine_type= InnoDB; + +# Suppress warnings that might be generated during the test +connection master; +call mtr.add_suppression("Timeout waiting for reply of binlog"); +call mtr.add_suppression("Read semi-sync reply"); +call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT."); +call mtr.add_suppression("mysqld: Got an error reading communication packets"); +connection slave; +# While 'Current_Pos' exists as an option for Using_Gtd, keeping these +# events in the binlog will update gtid_binlog_pos, and the later calls to +# set `@@global.gtid_slave_pos= ""` will provide warning messages with +# inconsistent GTID values because the seq_nos are non-deterministic with +# the masters events coming in concurrently +set sql_log_bin=0; +call mtr.add_suppression("Master server does not support semi-sync"); +call mtr.add_suppression("Semi-sync slave .* reply"); +call mtr.add_suppression("Slave SQL.*Request to stop slave SQL Thread received while applying a group that has non-transactional changes; waiting for completion of the group"); +set sql_log_bin=1; +connection master; + +# wait for dying connections (if any) to disappear +let $wait_condition= select count(*) = 0 from information_schema.processlist where command='killed'; +--source include/wait_condition.inc + +# After fix of BUG#45848, semi-sync slave should not create any extra +# connections on master, save the count of connections before start +# semi-sync slave for comparison below. +let $_connections_normal_slave= query_get_value(SHOW STATUS LIKE 'Threads_connected', Value, 1); + +--echo # +--echo # Uninstall semi-sync plugins on master and slave +--echo # +connection slave; +source include/stop_slave.inc; +--source include/reset_slave.inc +set global rpl_semi_sync_master_enabled= 0; +set global rpl_semi_sync_slave_enabled= 0; + +connection master; +reset master; +set global rpl_semi_sync_master_enabled= 0; +set global rpl_semi_sync_slave_enabled= 0; + +--echo # +--echo # Main test of semi-sync replication start here +--echo # + +connection master; + +set global rpl_semi_sync_master_timeout= 60000; # 60s + +echo [ default state of semi-sync on master should be OFF ]; +show variables like 'rpl_semi_sync_master_enabled'; + +echo [ enable semi-sync on master ]; +set global rpl_semi_sync_master_enabled = 1; +show variables like 'rpl_semi_sync_master_enabled'; + +echo [ status of semi-sync on master should be ON even without any semi-sync slaves ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +--echo # +--echo # BUG#45672 Semisync repl: ActiveTranx:insert_tranx_node: transaction node allocation failed +--echo # BUG#45673 Semisynch reports correct operation even if no slave is connected +--echo # + +# BUG#45672 When semi-sync is enabled on master, it would allocate +# transaction node even without semi-sync slave connected, and would +# finally result in transaction node allocation error. +# +# Semi-sync master will pre-allocate 'max_connections' transaction +# nodes, so here we do more than that much transactions to check if it +# will fail or not. +# select @@global.max_connections + 1; +let $i= `select @@global.max_connections + 1`; +disable_query_log; +eval create table t1 (a int) engine=$engine_type; +while ($i) +{ + eval insert into t1 values ($i); + dec $i; +} +drop table t1; +enable_query_log; + +# BUG#45673 +echo [ status of semi-sync on master should be OFF ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +# reset master to make sure the following test will start with a clean environment +reset master; + +connection slave; + +echo [ default state of semi-sync on slave should be OFF ]; +show variables like 'rpl_semi_sync_slave_enabled'; + +echo [ enable semi-sync on slave ]; +set global rpl_semi_sync_slave_enabled = 1; +show variables like 'rpl_semi_sync_slave_enabled'; +source include/start_slave.inc; + +connection master; + +# NOTE: Rpl_semi_sync_master_client will only be updated when +# semi-sync slave has started binlog dump request +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 1; +source include/wait_for_status_var.inc; + +echo [ initial master state after the semi-sync slave connected ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +replace_result $engine_type ENGINE_TYPE; +eval create table t1(a int) engine = $engine_type; + +echo [ master state after CREATE TABLE statement ]; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +# After fix of BUG#45848, semi-sync slave should not create any extra +# connections on master. +let $_connections_semisync_slave= query_get_value(SHOW STATUS LIKE 'Threads_connected', Value, 1); +replace_result $_connections_normal_slave CONNECTIONS_NORMAL_SLAVE $_connections_semisync_slave CONNECTIONS_SEMISYNC_SLAVE; +eval select $_connections_semisync_slave - $_connections_normal_slave as 'Should be 0'; + +echo [ insert records to table ]; +insert t1 values (10); +insert t1 values (9); +insert t1 values (8); +insert t1 values (7); +insert t1 values (6); +insert t1 values (5); +insert t1 values (4); +insert t1 values (3); +insert t1 values (2); +insert t1 values (1); + +echo [ master status after inserts ]; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +sync_slave_with_master; + +echo [ slave status after replicated inserts ]; +show status like 'Rpl_semi_sync_slave_status'; + +select count(distinct a) from t1; +select min(a) from t1; +select max(a) from t1; + +--echo +--echo # BUG#50157 +--echo # semi-sync replication crashes when replicating a transaction which +--echo # include 'CREATE TEMPORARY TABLE `MyISAM_t` SELECT * FROM `Innodb_t` ; + +connection master; +SET SESSION AUTOCOMMIT= 0; +CREATE TABLE t2(c1 INT) ENGINE=innodb; +sync_slave_with_master; + +connection master; +BEGIN; +--echo +--echo # Even though it is in a transaction, this statement is binlogged into binlog +--echo # file immediately. +--disable_warnings +CREATE TEMPORARY TABLE t3 SELECT c1 FROM t2 where 1=1; +--enable_warnings +--echo +--echo # These statements will not be binlogged until the transaction is committed +INSERT INTO t2 VALUES(11); +INSERT INTO t2 VALUES(22); +COMMIT; + +DROP TABLE t2, t3; +SET SESSION AUTOCOMMIT= 1; +sync_slave_with_master; + + +--echo # +--echo # Test semi-sync master will switch OFF after one transaction +--echo # timeout waiting for slave reply. +--echo # +connection slave; +source include/stop_slave.inc; + +connection master; +--source include/kill_binlog_dump_threads.inc +set global rpl_semi_sync_master_timeout= 5000; + +# The first semi-sync check should be on because after slave stop, +# there are no transactions on the master. +echo [ master status should be ON ]; + +let $status_var= Rpl_semi_sync_master_status; +let $status_var_value= ON; +source include/wait_for_status_var.inc; + +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 0; +source include/wait_for_status_var.inc; + +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +echo [ semi-sync replication of these transactions will fail ]; +insert into t1 values (500); + +# Wait for the semi-sync replication of this transaction to timeout +let $status_var= Rpl_semi_sync_master_status; +let $status_var_value= OFF; +source include/wait_for_status_var.inc; + +# The second semi-sync check should be off because one transaction +# times out during waiting. +echo [ master status should be OFF ]; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +# Semi-sync status on master is now OFF, so all these transactions +# will be replicated asynchronously. +delete from t1 where a=10; +delete from t1 where a=9; +delete from t1 where a=8; +delete from t1 where a=7; +delete from t1 where a=6; +delete from t1 where a=5; +delete from t1 where a=4; +delete from t1 where a=3; +delete from t1 where a=2; +delete from t1 where a=1; + +insert into t1 values (100); + +echo [ master status should be OFF ]; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +--echo # +--echo # Test semi-sync status on master will be ON again when slave catches up +--echo # + +# Save the master position for later use. +save_master_pos; + +connection slave; + +echo [ slave status should be OFF ]; +show status like 'Rpl_semi_sync_slave_status'; +source include/start_slave.inc; +sync_with_master; + +echo [ slave status should be ON ]; +show status like 'Rpl_semi_sync_slave_status'; + +select count(distinct a) from t1; +select min(a) from t1; +select max(a) from t1; + +connection master; + +# The master semi-sync status should be on again after slave catches up. +echo [ master status should be ON again after slave catches up ]; + +let $status_var= Rpl_semi_sync_master_status; +let $status_var_value= ON; +source include/wait_for_status_var.inc; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; +show status like 'Rpl_semi_sync_master_clients'; + +--echo # +--echo # Test disable/enable master semi-sync on the fly. +--echo # + +drop table t1; +sync_slave_with_master; + +source include/stop_slave.inc; + +--echo # +--echo # Flush status +--echo # +connection master; +echo [ Semi-sync master status variables before FLUSH STATUS ]; +SHOW STATUS LIKE 'Rpl_semi_sync_master_no_tx'; +SHOW STATUS LIKE 'Rpl_semi_sync_master_yes_tx'; +# Do not write the FLUSH STATUS to binlog, to make sure we'll get a +# clean status after this. +FLUSH NO_WRITE_TO_BINLOG STATUS; +echo [ Semi-sync master status variables after FLUSH STATUS ]; +SHOW STATUS LIKE 'Rpl_semi_sync_master_no_tx'; +SHOW STATUS LIKE 'Rpl_semi_sync_master_yes_tx'; + +connection master; + +source include/show_master_logs.inc; +show variables like 'rpl_semi_sync_master_enabled'; + +echo [ disable semi-sync on the fly ]; +set global rpl_semi_sync_master_enabled=0; +show variables like 'rpl_semi_sync_master_enabled'; +show status like 'Rpl_semi_sync_master_status'; + +echo [ enable semi-sync on the fly ]; +set global rpl_semi_sync_master_enabled=1; +show variables like 'rpl_semi_sync_master_enabled'; +show status like 'Rpl_semi_sync_master_status'; + +--echo # +--echo # Test RESET MASTER/SLAVE +--echo # + +connection slave; + +source include/start_slave.inc; + +connection master; + +replace_result $engine_type ENGINE_TYPE; +eval create table t1 (a int) engine = $engine_type; +drop table t1; + +sync_slave_with_master; + +echo [ test reset master ]; +connection master; + +reset master; + +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +connection slave; + +source include/stop_slave.inc; +--source include/reset_slave.inc + +# Kill the dump thread on master for previous slave connection and +--source include/kill_binlog_dump_threads.inc + +connection slave; +source include/start_slave.inc; + +connection master; + +# Wait for dump thread to start, Rpl_semi_sync_master_clients will be +# 1 after dump thread started. +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 1; +source include/wait_for_status_var.inc; + +replace_result $engine_type ENGINE_TYPE; +eval create table t1 (a int) engine = $engine_type; +insert into t1 values (1); +insert into t1 values (2), (3); + +sync_slave_with_master; + +select * from t1; + +connection master; + +echo [ master semi-sync status should be ON ]; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +--echo # +--echo # Start semi-sync replication without SUPER privilege +--echo # +connection slave; +source include/stop_slave.inc; +--source include/reset_slave.inc +connection master; +reset master; + +# Kill the dump thread on master for previous slave connection and wait for it to exit +--source include/kill_binlog_dump_threads.inc + +# Do not binlog the following statement because it will generate +# different events for ROW and STATEMENT format +set sql_log_bin=0; +grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password'; +flush privileges; +set sql_log_bin=1; +connection slave; +grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password'; +flush privileges; +change master to master_user='rpl',master_password='rpl_password'; +source include/start_slave.inc; +show status like 'Rpl_semi_sync_slave_status'; +connection master; + +# Wait for the semi-sync binlog dump thread to start +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 1; +source include/wait_for_status_var.inc; +echo [ master semi-sync should be ON ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; +insert into t1 values (4); +insert into t1 values (5); +echo [ master semi-sync should be ON ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +show status like 'Rpl_semi_sync_master_no_tx'; +show status like 'Rpl_semi_sync_master_yes_tx'; + +--echo # +--echo # Test semi-sync slave connect to non-semi-sync master +--echo # + +# Disable semi-sync on master +connection slave; +source include/stop_slave.inc; +SHOW STATUS LIKE 'Rpl_semi_sync_slave_status'; + +connection master; + +# Kill the dump thread on master for previous slave connection and wait for it to exit +--source include/kill_binlog_dump_threads.inc + +echo [ Semi-sync status on master should be ON ]; +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 0; +source include/wait_for_status_var.inc; +show status like 'Rpl_semi_sync_master_status'; +let $status_var= Rpl_semi_sync_master_status; +let $status_var_value= ON; +source include/wait_for_status_var.inc; +set global rpl_semi_sync_master_enabled= 0; + +connection slave; +SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled'; +source include/start_slave.inc; +connection master; +insert into t1 values (8); +let $status_var= Rpl_semi_sync_master_clients; +let $status_var_value= 1; +source include/wait_for_status_var.inc; +echo [ master semi-sync clients should be 1, status should be OFF ]; +show status like 'Rpl_semi_sync_master_clients'; +show status like 'Rpl_semi_sync_master_status'; +sync_slave_with_master; +show status like 'Rpl_semi_sync_slave_status'; + +# Uninstall semi-sync plugin on master +connection slave; +source include/stop_slave.inc; +connection master; +set global rpl_semi_sync_master_enabled= 0; + +connection slave; +SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled'; +source include/start_slave.inc; + +connection master; +insert into t1 values (10); +sync_slave_with_master; + +--echo # +--echo # Test non-semi-sync slave connect to semi-sync master +--echo # + +connection master; +set global rpl_semi_sync_master_timeout= 5000; # 5s +set global rpl_semi_sync_master_enabled= 1; + +connection slave; +source include/stop_slave.inc; +SHOW STATUS LIKE 'Rpl_semi_sync_slave_status'; + +echo [ uninstall semi-sync slave plugin ]; +set global rpl_semi_sync_slave_enabled= 0; + +echo [ reinstall semi-sync slave plugin and disable semi-sync ]; +SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled'; +SHOW STATUS LIKE 'Rpl_semi_sync_slave_status'; +source include/start_slave.inc; +SHOW STATUS LIKE 'Rpl_semi_sync_slave_status'; + +--echo # +--echo # Clean up +--echo # + +connection slave; +source include/stop_slave.inc; +set global rpl_semi_sync_slave_enabled= 0; + +connection master; +set global rpl_semi_sync_master_enabled= 0; + +connection slave; +change master to master_user='root',master_password=''; +source include/start_slave.inc; + +connection master; +drop table t1; +sync_slave_with_master; + +connection master; +drop user rpl@127.0.0.1; +flush privileges; +set global rpl_semi_sync_master_timeout= default; +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_semi_sync_event.test b/mysql-test/suite/rpl/t/rpl_semi_sync_event.test index 7a7e1c1e074..d4df9b4041b 100644 --- a/mysql-test/suite/rpl/t/rpl_semi_sync_event.test +++ b/mysql-test/suite/rpl/t/rpl_semi_sync_event.test @@ -1,7 +1,7 @@ +source include/no_valgrind_without_big.inc; source include/not_embedded.inc; source include/have_innodb.inc; source include/master-slave.inc; -source include/no_valgrind_without_big.inc; let $engine_type= InnoDB; diff --git a/mysql-test/suite/rpl/t/rpl_semi_sync_wait_point.test b/mysql-test/suite/rpl/t/rpl_semi_sync_wait_point.test index dcff4030fdb..5eae91a55f2 100644 --- a/mysql-test/suite/rpl/t/rpl_semi_sync_wait_point.test +++ b/mysql-test/suite/rpl/t/rpl_semi_sync_wait_point.test @@ -23,8 +23,6 @@ SET @@global.rpl_semi_sync_master_wait_no_slave = 1; --echo # It's okay to see "Killed" but we should not see "Timeout" in the log. call mtr.add_suppression("Killed waiting for reply of binlog"); -call mtr.add_suppression("Run function 'after_commit' in plugin 'rpl_semi_sync_master' failed"); -call mtr.add_suppression("Run function 'after_sync' in plugin 'rpl_semi_sync_master' failed"); --echo # --echo # Test wait point = AFTER_COMMIT diff --git a/mysql-test/suite/rpl/t/rpl_skip_replication.test b/mysql-test/suite/rpl/t/rpl_skip_replication.test index 66fdbb8915a..d1044c4bf51 100644 --- a/mysql-test/suite/rpl/t/rpl_skip_replication.test +++ b/mysql-test/suite/rpl/t/rpl_skip_replication.test @@ -1 +1,408 @@ ---source include/rpl_skip_replication.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it. +# +# Usage: +# +# --let $use_remote_mysqlbinlog= 1 # optional +# --source suite/rpl/include/rpl_skip_replication.inc +# +# The script uses MYSQLBINLOG to verify certain results. +# By default, it uses binary logs directly. If it is undesirable, +# this behavior can be overridden by setting $use_remote_binlog +# as shown above. +# The value will be unset after every execution of the script, +# so if it is needed, it should be set explicitly before each call. +# + +--source include/have_innodb.inc +--source include/master-slave.inc + +--connection slave +--source include/stop_slave.inc +CHANGE MASTER TO MASTER_USE_GTID=NO; +--source include/start_slave.inc +--connection master + +connection slave; +# Test that SUPER is required to change @@replicate_events_marked_for_skip. +CREATE USER 'nonsuperuser'@'127.0.0.1'; +GRANT ALTER,CREATE,DELETE,DROP,EVENT,INSERT,PROCESS,REPLICATION SLAVE, + SELECT,UPDATE ON *.* TO 'nonsuperuser'@'127.0.0.1'; +connect(nonpriv, 127.0.0.1, nonsuperuser,, test, $SLAVE_MYPORT,); +connection nonpriv; +--error ER_SPECIFIC_ACCESS_DENIED_ERROR +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_MASTER; +disconnect nonpriv; +connection slave; +DROP USER'nonsuperuser'@'127.0.0.1'; + +SELECT @@global.replicate_events_marked_for_skip; +--error ER_SLAVE_MUST_STOP +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_SLAVE; +SELECT @@global.replicate_events_marked_for_skip; +STOP SLAVE; +--error ER_GLOBAL_VARIABLE +SET SESSION replicate_events_marked_for_skip=FILTER_ON_MASTER; +SELECT @@global.replicate_events_marked_for_skip; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_MASTER; +SELECT @@global.replicate_events_marked_for_skip; +START SLAVE; + +connection master; +SELECT @@skip_replication; +--error ER_LOCAL_VARIABLE +SET GLOBAL skip_replication=1; +SELECT @@skip_replication; + +CREATE TABLE t1 (a INT PRIMARY KEY, b INT) ENGINE=myisam; +CREATE TABLE t2 (a INT PRIMARY KEY, b INT) ENGINE=innodb; +INSERT INTO t1(a) VALUES (1); +INSERT INTO t2(a) VALUES (1); + + +# Test that master-side filtering works. +SET skip_replication=1; + +CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=myisam; +INSERT INTO t1(a) VALUES (2); +INSERT INTO t2(a) VALUES (2); + +# Inject a rotate event in the binlog stream sent to slave (otherwise we will +# fail sync_slave_with_master as the last event on the master is not present +# on the slave). +FLUSH NO_WRITE_TO_BINLOG LOGS; + +sync_slave_with_master; +connection slave; +SHOW TABLES; +SELECT * FROM t1; +SELECT * FROM t2; + +connection master; +DROP TABLE t3; + +FLUSH NO_WRITE_TO_BINLOG LOGS; +sync_slave_with_master; + + +# Test that slave-side filtering works. +connection slave; +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_SLAVE; +START SLAVE; + +connection master; +SET skip_replication=1; +CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=myisam; +INSERT INTO t1(a) VALUES (3); +INSERT INTO t2(a) VALUES (3); + +# Inject a rotate event in the binlog stream sent to slave (otherwise we will +# fail sync_slave_with_master as the last event on the master is not present +# on the slave). +FLUSH NO_WRITE_TO_BINLOG LOGS; + +sync_slave_with_master; +connection slave; +SHOW TABLES; +SELECT * FROM t1; +SELECT * FROM t2; + +connection master; +DROP TABLE t3; + +FLUSH NO_WRITE_TO_BINLOG LOGS; +sync_slave_with_master; +connection slave; +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=REPLICATE; +START SLAVE; + + +# Test that events with @@skip_replication=1 are not filtered when filtering is +# not set on slave. +connection master; +SET skip_replication=1; +CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=myisam; +INSERT INTO t3(a) VALUES(2); +sync_slave_with_master; +connection slave; +SELECT * FROM t3; +connection master; +DROP TABLE t3; + +# +# Test that the slave will preserve the @@skip_replication flag in its +# own binlog. +# + +TRUNCATE t1; +sync_slave_with_master; +connection slave; +RESET MASTER; + +connection master; +SET skip_replication=0; +INSERT INTO t1 VALUES (1,0); +SET skip_replication=1; +INSERT INTO t1 VALUES (2,0); +SET skip_replication=0; +INSERT INTO t1 VALUES (3,0); + +sync_slave_with_master; +connection slave; +# Since slave has @@replicate_events_marked_for_skip=REPLICATE, it should have +# applied all events. +SELECT * FROM t1 ORDER by a; + +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_MASTER; +let $SLAVE_DATADIR= `select @@datadir`; + +connection master; +TRUNCATE t1; + +# Now apply the slave binlog to the master, to check that both the slave +# and mysqlbinlog will preserve the @@skip_replication flag. + +--let $mysqlbinlog_args= $SLAVE_DATADIR/slave-bin.000001 +if ($use_remote_mysqlbinlog) +{ + --let $mysqlbinlog_args= --read-from-remote-server --protocol=tcp --host=127.0.0.1 --port=$SLAVE_MYPORT -uroot slave-bin.000001 + --let $use_remote_mysqlbinlog= 0 +} +--exec $MYSQL_BINLOG $mysqlbinlog_args > $MYSQLTEST_VARDIR/tmp/rpl_skip_replication.binlog +--exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/rpl_skip_replication.binlog + +# The master should have all three events. +SELECT * FROM t1 ORDER by a; + +# The slave should be missing event 2, which is marked with the +# @@skip_replication flag. + +connection slave; +START SLAVE; + +connection master; +sync_slave_with_master; + +connection slave; +SELECT * FROM t1 ORDER by a; + +# +# Test that @@sql_slave_skip_counter does not count skipped @@skip_replication +# events. +# + +connection master; +TRUNCATE t1; + +sync_slave_with_master; +connection slave; +STOP SLAVE; +# We will skip two INSERTs (in addition to any skipped due to +# @@skip_replication). Since from 5.5 every statement is wrapped in +# BEGIN ... END, we need to skip 6 events for this. +SET GLOBAL sql_slave_skip_counter=6; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_SLAVE; +START SLAVE; + +connection master; +# Need to fix @@binlog_format to get consistent event count. +SET @old_binlog_format= @@binlog_format; +SET binlog_format= statement; +SET skip_replication=0; +INSERT INTO t1 VALUES (1,5); +SET skip_replication=1; +INSERT INTO t1 VALUES (2,5); +SET skip_replication=0; +INSERT INTO t1 VALUES (3,5); +INSERT INTO t1 VALUES (4,5); +SET binlog_format= @old_binlog_format; + +sync_slave_with_master; +connection slave; + +# The slave should have skipped the first three inserts (number 1 and 3 due +# to @@sql_slave_skip_counter=2, number 2 due to +# @@replicate_events_marked_for_skip=FILTER_ON_SLAVE). So only number 4 +# should be left. +SELECT * FROM t1; + + +# +# Check that BINLOG statement preserves the @@skip_replication flag. +# +connection slave; +# Need row @@binlog_format for BINLOG statements containing row events. +--source include/stop_slave.inc +SET @old_slave_binlog_format= @@global.binlog_format; +SET GLOBAL binlog_format= row; +--source include/start_slave.inc + +connection master; +TRUNCATE t1; + +SET @old_binlog_format= @@binlog_format; +SET binlog_format= row; +# Format description log event. +BINLOG 'wlZOTw8BAAAA8QAAAPUAAAAAAAQANS41LjIxLU1hcmlhREItZGVidWctbG9nAAAAAAAAAAAAAAAA +AAAAAAAAAAAAAAAAAAAAAAAAEzgNAAgAEgAEBAQEEgAA2QAEGggAAAAICAgCAAAAAAAAAAAAAAAA +AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA +AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA +AAAAAAAAAAAA371saA=='; +# INSERT INTO t1 VALUES (1,8) # with @@skip_replication=1 +BINLOG 'wlZOTxMBAAAAKgAAAGMBAAAAgCkAAAAAAAEABHRlc3QAAnQxAAIDAwAC +wlZOTxcBAAAAJgAAAIkBAAAAgCkAAAAAAAEAAv/8AQAAAAgAAAA='; +# INSERT INTO t1 VALUES (2,8) # with @@skip_replication=0 +BINLOG 'wlZOTxMBAAAAKgAAADwCAAAAACkAAAAAAAEABHRlc3QAAnQxAAIDAwAC +wlZOTxcBAAAAJgAAAGICAAAAACkAAAAAAAEAAv/8AgAAAAgAAAA='; +SET binlog_format= @old_binlog_format; + +SELECT * FROM t1 ORDER BY a; +sync_slave_with_master; +connection slave; +# Slave should have only the second insert, the first should be ignored due to +# the @@skip_replication flag. +SELECT * FROM t1 ORDER by a; + +--source include/stop_slave.inc +SET GLOBAL binlog_format= @old_slave_binlog_format; +--source include/start_slave.inc + + +# Test that it is not possible to change @@skip_replication inside a +# transaction or statement, thereby replicating only parts of statements +# or transactions. +connection master; +SET skip_replication=0; + +BEGIN; +--error ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET skip_replication=0; +--error ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET skip_replication=1; +ROLLBACK; +SET skip_replication=1; +BEGIN; +--error ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET skip_replication=0; +--error ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET skip_replication=1; +COMMIT; +SET autocommit=0; +INSERT INTO t2(a) VALUES(100); +--error ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET skip_replication=1; +ROLLBACK; +SET autocommit=1; + +SET skip_replication=1; +--delimiter | +CREATE FUNCTION foo (x INT) RETURNS INT BEGIN SET SESSION skip_replication=x; RETURN x; END| +CREATE PROCEDURE bar(x INT) BEGIN SET SESSION skip_replication=x; END| +CREATE FUNCTION baz (x INT) RETURNS INT BEGIN CALL bar(x); RETURN x; END| +--delimiter ; +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +SELECT foo(0); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +SELECT baz(0); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET @a= foo(1); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +SET @a= baz(1); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +UPDATE t2 SET b=foo(0); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +UPDATE t2 SET b=baz(0); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +INSERT INTO t1 VALUES (101, foo(1)); +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_SKIP_REPLICATION +INSERT INTO t1 VALUES (101, baz(0)); +SELECT @@skip_replication; +CALL bar(0); +SELECT @@skip_replication; +CALL bar(1); +SELECT @@skip_replication; +DROP FUNCTION foo; +DROP PROCEDURE bar; +DROP FUNCTION baz; + + +# Test that master-side filtering happens on the master side, and that +# slave-side filtering happens on the slave. + +# First test that events do not reach the slave when master-side filtering +# is configured. Do this by replicating first with only the IO thread running +# and master-side filtering; then change to no filtering and start the SQL +# thread. This should still skip the events, as master-side filtering +# means the events never reached the slave. +connection master; +SET skip_replication= 0; +TRUNCATE t1; +sync_slave_with_master; +connection slave; +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_MASTER; +START SLAVE IO_THREAD; +connection master; +SET skip_replication= 1; +INSERT INTO t1(a) VALUES (1); +SET skip_replication= 0; +INSERT INTO t1(a) VALUES (2); +--source include/save_master_pos.inc +connection slave; +--source include/sync_io_with_master.inc +STOP SLAVE IO_THREAD; +SET GLOBAL replicate_events_marked_for_skip=REPLICATE; +START SLAVE; +connection master; +sync_slave_with_master; +connection slave; +# Now only the second insert of (2) should be visible, as the first was +# filtered on the master, so even though the SQL thread ran without skipping +# events, it will never see the event in the first place. +SELECT * FROM t1; + +# Now tests that when slave-side filtering is configured, events _do_ reach +# the slave. +connection master; +SET skip_replication= 0; +TRUNCATE t1; +sync_slave_with_master; +connection slave; +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=FILTER_ON_SLAVE; +START SLAVE IO_THREAD; +connection master; +SET skip_replication= 1; +INSERT INTO t1(a) VALUES (1); +SET skip_replication= 0; +INSERT INTO t1(a) VALUES (2); +--source include/save_master_pos.inc +connection slave; +--source include/sync_io_with_master.inc +STOP SLAVE IO_THREAD; +SET GLOBAL replicate_events_marked_for_skip=REPLICATE; +START SLAVE; +connection master; +sync_slave_with_master; +connection slave; +# Now both inserts should be visible. Since filtering was configured to be +# slave-side, the event is in the relay log, and when the SQL thread ran we +# had disabled filtering again. +SELECT * FROM t1 ORDER BY a; + + +# Clean up. +connection master; +SET skip_replication=0; +DROP TABLE t1,t2; +connection slave; +STOP SLAVE; +SET GLOBAL replicate_events_marked_for_skip=REPLICATE; +START SLAVE; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_special_charset.test b/mysql-test/suite/rpl/t/rpl_special_charset.test index fa19a17b1e4..641aa483d32 100644 --- a/mysql-test/suite/rpl/t/rpl_special_charset.test +++ b/mysql-test/suite/rpl/t/rpl_special_charset.test @@ -1 +1,32 @@ ---source include/rpl_special_charset.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +################################################################################ +# Bug#19855907 IO THREAD AUTHENTICATION ISSUE WITH SOME CHARACTER SETS +# Problem: IO thread fails to connect to master if servers are configured with +# special character sets like utf16, utf32, ucs2. +# +# Analysis: MySQL server does not support few special character sets like +# utf16,utf32 and ucs2 as "client's character set"(eg: utf16,utf32, ucs2). +# When IO thread is trying to connect to Master, it sets server's character +# set as client's character set. When Slave server is started with these +# special character sets, IO thread (a connection to Master) fails because +# of the above said reason. +# +# Fix: If server's character set is not supported as client's character set, +# then set default's client character set(latin1) as client's character set. +############################################################################### +--source include/master-slave.inc +call mtr.add_suppression("'utf16' can not be used as client character set"); +CREATE TABLE t1(i VARCHAR(20)); +INSERT INTO t1 VALUES (0xFFFF); +--sync_slave_with_master +--let diff_tables=master:t1, slave:t1 +--source include/diff_tables.inc +# Cleanup +--connection master +DROP TABLE t1; +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_sporadic_master.test b/mysql-test/suite/rpl/t/rpl_sporadic_master.test index 397756af396..ad4c44cbf74 100644 --- a/mysql-test/suite/rpl/t/rpl_sporadic_master.test +++ b/mysql-test/suite/rpl/t/rpl_sporadic_master.test @@ -1 +1,32 @@ ---source include/rpl_sporadic_master.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# test to see if replication can continue when master sporadically fails on +# COM_BINLOG_DUMP and additionally limits the number of events per dump + +source include/master-slave.inc; + +create table t2(n int); +create table t1(n int not null auto_increment primary key); +insert into t1 values (NULL),(NULL); +truncate table t1; +# We have to use 4 in the following to make this test work with all table types +insert into t1 values (4),(NULL); +sync_slave_with_master; +--source include/stop_slave.inc +--source include/start_slave.inc +connection master; +insert into t1 values (NULL),(NULL); +flush logs; +truncate table t1; +insert into t1 values (10),(NULL),(NULL),(NULL),(NULL),(NULL); +sync_slave_with_master; +select * from t1 ORDER BY n; +connection master; +drop table t1,t2; +sync_slave_with_master; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_ssl.test b/mysql-test/suite/rpl/t/rpl_ssl.test index c4a534b9294..0420a6c8c2d 100644 --- a/mysql-test/suite/rpl/t/rpl_ssl.test +++ b/mysql-test/suite/rpl/t/rpl_ssl.test @@ -1 +1,116 @@ ---source include/rpl_ssl.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +source include/no_valgrind_without_big.inc; +source include/have_ssl_communication.inc; +source include/master-slave.inc; + +# create a user for replication that requires ssl encryption +connection master; +create user replssl@localhost; +grant replication slave on *.* to replssl@localhost require ssl; +create table t1 (t int auto_increment, KEY(t)); + +sync_slave_with_master; + +# Set slave to use SSL for connection to master +stop slave; +--replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR +eval change master to + master_user='replssl', + master_password='', + master_ssl=1, + master_ssl_ca ='$MYSQL_TEST_DIR/std_data/cacert.pem', + master_ssl_cert='$MYSQL_TEST_DIR/std_data/client-cert.pem', + master_ssl_key='$MYSQL_TEST_DIR/std_data/client-key.pem'; +start slave; + +# Switch to master and insert one record, then sync it to slave +connection master; +insert into t1 values(1); +sync_slave_with_master; + +# The record should now be on slave +select * from t1; + +# The slave is synced and waiting/reading from master +# SHOW SLAVE STATUS will show "Waiting for master to send event" +let $status_items= Master_SSL_Allowed, Master_SSL_CA_Path, Master_SSL_CA_File, Master_SSL_Crl, Master_SSL_Crlpath, Master_SSL_Cert, Master_SSL_Key; +source include/show_slave_status.inc; +source include/check_slave_is_running.inc; + +# Stop the slave, as reported in bug#21871 it would hang +STOP SLAVE; + +select * from t1; + +# Do the same thing a number of times +disable_query_log; +disable_result_log; +# 2007-11-27 mats Bug #32756 Starting and stopping the slave in a loop can lose rows +# After discussions with Engineering, I'm disabling this part of the test to avoid it causing +# red trees. +disable_parsing; +let $i= 100; +while ($i) +{ + start slave; + connection master; + insert into t1 values (NULL); + select * from t1; # Some variance + connection slave; + select * from t1; # Some variance + stop slave; + dec $i; +} +enable_parsing; +START SLAVE; +enable_query_log; +enable_result_log; +connection master; +# INSERT one more record to make sure +# the sync has something to do +insert into t1 values (NULL); +let $master_count= `select count(*) from t1`; + +sync_slave_with_master; +--source include/wait_for_slave_to_start.inc +source include/show_slave_status.inc; +source include/check_slave_is_running.inc; + +let $slave_count= `select count(*) from t1`; + +if ($slave_count != $master_count) +{ + echo master and slave differed in number of rows; + echo master: $master_count; + echo slave: $slave_count; + + connection master; + select count(*) t1; + select * from t1; + connection slave; + select count(*) t1; + select * from t1; + query_vertical show slave status; +} + +connection master; +drop user replssl@localhost; +drop table t1; +sync_slave_with_master; + +--source include/stop_slave.inc +CHANGE MASTER TO + master_user = 'root', + master_ssl = 0, + master_ssl_ca = '', + master_ssl_cert = '', + master_ssl_key = ''; + +--echo End of 5.0 tests +--let $rpl_only_running_threads= 1 +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_stm_lcase_tblnames.test b/mysql-test/suite/rpl/t/rpl_stm_lcase_tblnames.test index 619b57994c2..3809cd89e4a 100644 --- a/mysql-test/suite/rpl/t/rpl_stm_lcase_tblnames.test +++ b/mysql-test/suite/rpl/t/rpl_stm_lcase_tblnames.test @@ -3,10 +3,10 @@ # For details look into extra/rpl_tests/rpl_lower_case_table_names.test # +-- source include/not_windows.inc +-- source include/have_innodb.inc -- source include/have_binlog_format_mixed_or_statement.inc -- source include/master-slave.inc --- source include/have_innodb.inc --- source include/not_windows.inc -- let $engine=InnoDB -- source include/rpl_lower_case_table_names.test diff --git a/mysql-test/suite/rpl/t/rpl_stm_relay_ign_space.test b/mysql-test/suite/rpl/t/rpl_stm_relay_ign_space.test index b4e53358712..654a5d47cb9 100644 --- a/mysql-test/suite/rpl/t/rpl_stm_relay_ign_space.test +++ b/mysql-test/suite/rpl/t/rpl_stm_relay_ign_space.test @@ -1 +1,107 @@ ---source include/rpl_stm_relay_ign_space.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# +# BUG#12400313 / BUG#64503 test case +# +# +# Description +# ----------- +# +# This test case starts the slave server with: +# --relay-log-space-limit=8192 --relay-log-purge --max-relay-log-size=4096 +# +# Then it issues some queries that will cause the slave to reach +# relay-log-space-limit. We lock the table so that the SQL thread is +# not able to purge the log and then we issue some more statements. +# +# The purpose is to show that the IO thread will honor the limits +# while the SQL thread is not able to purge the relay logs, which did +# not happen before this patch. In addition we assert that while +# ignoring the limit (SQL thread needs to rotate before purging), the +# IO thread does not do it in an uncontrolled manner. + +--source include/have_binlog_format_statement.inc +--source include/have_innodb.inc +--source include/master-slave.inc + +--disable_query_log +CREATE TABLE t1 (c1 TEXT) engine=InnoDB; + +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); + +--sync_slave_with_master + +# wait for the SQL thread to sleep +--let $show_statement= SHOW PROCESSLIST +--let $field= State +--let $condition= = 'Slave has read all relay log; waiting for more updates' +--source include/wait_show_condition.inc + +# now the io thread has set rli->ignore_space_limit +# lets lock the table so that once the SQL thread awakes +# it blocks there and does not set rli->ignore_space_limit +# back to zero +LOCK TABLE t1 WRITE; + +# now issue more statements that will overflow the +# rli->log_space_limit (in this case ~10K) +--connection master + +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); +INSERT INTO t1 VALUES ('xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'); + +--connection slave + +# ASSERT that the IO thread waits for the SQL thread to release some +# space before continuing +--let $show_statement= SHOW PROCESSLIST +--let $field= State +--let $condition= LIKE 'Waiting for %' +# before the patch (IO would have transfered everything) +#--let $condition= = 'Waiting for master to send event' +# after the patch (now it waits for space to be freed) +#--let $condition= = 'Waiting for the slave SQL thread to free enough relay log space' +--source include/wait_show_condition.inc + +# without the patch we can uncomment the following two lines and +# watch the IO thread synchronize with the master, thus writing +# relay logs way over the space limit +#--connection master +#--source include/sync_slave_io_with_master.inc + +## ASSERT that the IO thread has honored the limit+few bytes required to be able to purge +--let $relay_log_space_while_sql_is_executing = query_get_value(SHOW SLAVE STATUS, Relay_Log_Space, 1) +--let $relay_log_space_limit = query_get_value(SHOW VARIABLES LIKE "relay_log_space_limit", Value, 1) +--let $assert_text= Assert that relay log space is close to the limit +--let $assert_cond= $relay_log_space_while_sql_is_executing <= $relay_log_space_limit * 1.15 +--source include/assert.inc + +# unlock the table and let SQL thread continue applying events +UNLOCK TABLES; + +--connection master +--sync_slave_with_master +--let $diff_tables=master:test.t1,slave:test.t1 +--source include/diff_tables.inc + +--connection master +DROP TABLE t1; +--enable_query_log +--sync_slave_with_master + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test b/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test index 2625508515b..d814a257711 100644 --- a/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test +++ b/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test @@ -1 +1,633 @@ ---source include/rpl_switch_stm_row_mixed.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +# +# rpl_switch_stm_row_mixed tests covers +# +# - Master is switching explicitly between STATEMENT, ROW, and MIXED +# binlog format showing when it is possible and when not. +# - Master switching from MIXED to RBR implicitly listing all use +# cases, e.g a query invokes SYS_GUID(), thereafter to serve as the +# definition of MIXED binlog format +# - correctness of execution + + +-- source include/have_binlog_format_mixed_or_row.inc +-- source include/master-slave.inc + +# Since this test generates row-based events in the binary log, the +# slave SQL thread cannot be in STATEMENT mode to execute this test, +# so we only execute it for MIXED and ROW as default value of +# BINLOG_FORMAT. + +connection slave; + +connection master; +--disable_warnings +drop database if exists mysqltest1; +create database mysqltest1; +--enable_warnings +use mysqltest1; + +# Save binlog format +set @my_binlog_format= @@global.binlog_format; + +# play with switching +set session binlog_format=mixed; +show session variables like "binlog_format%"; +set session binlog_format=statement; +show session variables like "binlog_format%"; +set session binlog_format=row; +show session variables like "binlog_format%"; + +set global binlog_format=DEFAULT; +show global variables like "binlog_format%"; +set global binlog_format=MIXED; +show global variables like "binlog_format%"; +set global binlog_format=STATEMENT; +show global variables like "binlog_format%"; +set global binlog_format=ROW; +show global variables like "binlog_format%"; +show session variables like "binlog_format%"; +select @@global.binlog_format, @@session.binlog_format; + +CREATE TABLE t1 (a varchar(100)); + +prepare stmt1 from 'insert into t1 select concat(SYS_GUID(),?)'; +set @string="emergency_1_"; +insert into t1 values("work_2_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +prepare stmt1 from 'insert into t1 select ?'; +insert into t1 values(concat(SYS_GUID(),"work_3_")); +execute stmt1 using @string; +deallocate prepare stmt1; + +insert into t1 values(concat("for_4_",SYS_GUID())); +insert into t1 select "yesterday_5_"; + +# verify that temp tables prevent a switch to SBR +create temporary table tmp(a char(100)); +insert into tmp values("see_6_"); +--error ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR +set binlog_format=statement; +insert into t1 select * from tmp; +drop temporary table tmp; + +# Now we go to SBR +set binlog_format=statement; +show global variables like "binlog_format%"; +show session variables like "binlog_format%"; +select @@global.binlog_format, @@session.binlog_format; +set global binlog_format=statement; +show global variables like "binlog_format%"; +show session variables like "binlog_format%"; +select @@global.binlog_format, @@session.binlog_format; + +prepare stmt1 from 'insert into t1 select ?'; +set @string="emergency_7_"; +insert into t1 values("work_8_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +prepare stmt1 from 'insert into t1 select ?'; +insert into t1 values("work_9_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +insert into t1 values("for_10_"); +insert into t1 select "yesterday_11_"; + +# test statement (is not default after wl#3368) +set binlog_format=statement; +select @@global.binlog_format, @@session.binlog_format; +set global binlog_format=statement; +select @@global.binlog_format, @@session.binlog_format; + +prepare stmt1 from 'insert into t1 select ?'; +set @string="emergency_12_"; +insert into t1 values("work_13_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +prepare stmt1 from 'insert into t1 select ?'; +insert into t1 values("work_14_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +insert into t1 values("for_15_"); +insert into t1 select "yesterday_16_"; + +# and now the mixed mode + +set global binlog_format=mixed; +select @@global.binlog_format, @@session.binlog_format; +set binlog_format=default; +select @@global.binlog_format, @@session.binlog_format; + +prepare stmt1 from 'insert into t1 select concat(SYS_GUID(),?)'; +set @string="emergency_17_"; +insert into t1 values("work_18_"); +execute stmt1 using @string; +deallocate prepare stmt1; + +prepare stmt1 from 'insert into t1 select ?'; +insert into t1 values(concat(SYS_GUID(),"work_19_")); +execute stmt1 using @string; +deallocate prepare stmt1; + +insert into t1 values(concat("for_20_",SYS_GUID())); +insert into t1 select "yesterday_21_"; + +prepare stmt1 from 'insert into t1 select ?'; +insert into t1 values(concat(SYS_GUID(),"work_22_")); +execute stmt1 using @string; +deallocate prepare stmt1; + +insert into t1 values(concat("for_23_",SYS_GUID())); +insert into t1 select "yesterday_24_"; + +# Test of CREATE TABLE SELECT + +create table t2 ENGINE=MyISAM select rpad(SYS_GUID(),100,' '); +create table t3 select 1 union select SYS_GUID(); +--disable_warnings +SET STATEMENT sql_mode = 'NO_ENGINE_SUBSTITUTION' FOR +create table t4 select * from t1 where 3 in (select 1 union select 2 union select SYS_GUID() union select 3); +--enable_warnings +SET STATEMENT sql_mode = 'NO_ENGINE_SUBSTITUTION' FOR +create table t5 select * from t1 where 3 in (select 1 union select 2 union select curdate() union select 3); +# what if SYS_GUID() is first: +--disable_warnings +insert ignore into t5 select SYS_GUID() from t1 where 3 in (select 1 union select 2 union select 3 union select * from t4); +--enable_warnings + +# inside a stored procedure + +delimiter |; +create procedure foo() +begin +insert into t1 values("work_25_"); +insert into t1 values(concat("for_26_",SYS_GUID())); +insert into t1 select "yesterday_27_"; +end| +create procedure foo2() +begin +insert into t1 values(concat("emergency_28_",SYS_GUID())); +insert into t1 values("work_29_"); +insert into t1 values(concat("for_30_",SYS_GUID())); +set session binlog_format=row; # accepted for stored procs +insert into t1 values("more work_31_"); +set session binlog_format=mixed; +end| +create function foo3() returns bigint unsigned +begin + set session binlog_format=row; # rejected for stored funcs + insert into t1 values("alarm"); + return 100; +end| +create procedure foo4(x varchar(100)) +begin +insert into t1 values(concat("work_250_",x)); +insert into t1 select "yesterday_270_"; +end| +delimiter ;| +call foo(); +call foo2(); +call foo4("hello"); +call foo4(SYS_GUID()); +call foo4("world"); + +# test that can't SET in a stored function +--error ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT +select foo3(); +select * from t1 where a="alarm"; + +# Tests of stored functions/triggers/views for BUG#20930 "Mixed +# binlogging mode does not work with stored functions, triggers, +# views" + +# Function which calls procedure +drop function foo3; +delimiter |; +create function foo3() returns bigint unsigned +begin + insert into t1 values("foo3_32_"); + call foo(); + return 100; +end| +delimiter ;| +insert into t2 select foo3(); + +prepare stmt1 from 'insert into t2 select foo3()'; +execute stmt1; +execute stmt1; +deallocate prepare stmt1; + +# Test if stored function calls stored function which calls procedure +# which requires row-based. + +delimiter |; +create function foo4() returns bigint unsigned +begin + insert into t2 select foo3(); + return 100; +end| +delimiter ;| +select foo4(); + +prepare stmt1 from 'select foo4()'; +execute stmt1; +execute stmt1; +deallocate prepare stmt1; + +# A simple stored function +delimiter |; +create function foo5() returns bigint unsigned +begin + insert into t2 select SYS_GUID(); + return 100; +end| +delimiter ;| +select foo5(); + +prepare stmt1 from 'select foo5()'; +execute stmt1; +execute stmt1; +deallocate prepare stmt1; + +# A simple stored function where SYS_GUID() is in the argument +delimiter |; +create function foo6(x varchar(100)) returns bigint unsigned +begin + insert into t2 select x; + return 100; +end| +delimiter ;| +select foo6("foo6_1_"); +select foo6(concat("foo6_2_",SYS_GUID())); + +prepare stmt1 from 'select foo6(concat("foo6_3_",SYS_GUID()))'; +execute stmt1; +execute stmt1; +deallocate prepare stmt1; + + +# Test of views using SYS_GUID() + +create view v1 as select SYS_GUID(); +create table t11 (data varchar(255)); +insert into t11 select * from v1; +# Test of querying INFORMATION_SCHEMA which parses the view's body, +# to verify that it binlogs statement-based (is not polluted by +# the parsing of the view's body). +insert into t11 select TABLE_NAME from INFORMATION_SCHEMA.TABLES where TABLE_SCHEMA='mysqltest1' and TABLE_NAME IN ('v1','t11'); +prepare stmt1 from "insert into t11 select TABLE_NAME from INFORMATION_SCHEMA.TABLES where TABLE_SCHEMA='mysqltest1' and TABLE_NAME IN ('v1','t11')"; +execute stmt1; +execute stmt1; +deallocate prepare stmt1; + +# Test of triggers with SYS_GUID() +delimiter |; +create trigger t11_bi before insert on t11 for each row +begin + set NEW.data = concat(NEW.data,SYS_GUID()); +end| +delimiter ;| +insert into t11 values("try_560_"); + +# Test that INSERT DELAYED works in mixed mode (BUG#20649) +insert delayed into t2 values("delay_1_"); +insert delayed into t2 values(concat("delay_2_",SYS_GUID())); +insert delayed into t2 values("delay_6_"); + +# Test for BUG#20633 (INSERT DELAYED RAND()/user_variable does not +# replicate fine in statement-based ; we test that in mixed mode it +# works). +insert delayed into t2 values(rand()); +set @a=2.345; +insert delayed into t2 values(@a); + +# With INSERT DELAYED, rows are written to the binlog after they are +# written to the table. Therefore, it is not enough to wait until the +# rows make it to t2 on the master (the rows may not be in the binlog +# at that time, and may still not be in the binlog when +# sync_slave_with_master is later called). Instead, we wait until the +# rows make it to t2 on the slave. We first call +# sync_slave_with_master, so that we are sure that t2 has been created +# on the slave. +sync_slave_with_master; +let $wait_condition= SELECT COUNT(*) = 19 FROM mysqltest1.t2; +--source include/wait_condition.inc +connection master; + +# If you want to do manual testing of the mixed mode regarding UDFs (not +# testable automatically as quite platform- and compiler-dependent), +# you just need to set the variable below to 1, and to +# "make udf_example.so" in sql/, and to copy sql/udf_example.so to +# MYSQL_TEST_DIR/lib/mysql. +let $you_want_to_test_UDF=0; +if ($you_want_to_test_UDF) +{ + CREATE FUNCTION metaphon RETURNS STRING SONAME 'udf_example.so'; + prepare stmt1 from 'insert into t1 select metaphon(?)'; + set @string="emergency_133_"; + insert into t1 values("work_134_"); + execute stmt1 using @string; + deallocate prepare stmt1; + prepare stmt1 from 'insert into t1 select ?'; + insert into t1 values(metaphon("work_135_")); + execute stmt1 using @string; + deallocate prepare stmt1; + insert into t1 values(metaphon("for_136_")); + insert into t1 select "yesterday_137_"; + create table t6 select metaphon("for_138_"); + create table t7 select 1 union select metaphon("for_139_"); + create table t8 select * from t1 where 3 in (select 1 union select 2 union select metaphon("for_140_") union select 3); + create table t9 select * from t1 where 3 in (select 1 union select 2 union select curdate() union select 3); +} + +create table t20 select * from t1; # save for comparing later +create table t21 select * from t2; +create table t22 select * from t3; +drop table t1,t2,t3; + +# This tests the fix to +# BUG#19630 stored function inserting into two auto_increment breaks statement-based binlog +# We verify that under the mixed binlog mode, a stored function +# modifying at least two tables having an auto_increment column, +# is binlogged row-based. Indeed in statement-based binlogging, +# only the auto_increment value generated for the first table +# is recorded in the binlog, the value generated for the 2nd table +# lacking. + +create table t1 (a int primary key auto_increment, b varchar(100)); +create table t2 (a int primary key auto_increment, b varchar(100)); +create table t3 (b varchar(100)); +delimiter |; +create function f (x varchar(100)) returns int deterministic +begin + insert into t1 values(null,x); + insert into t2 values(null,x); + return 1; +end| +delimiter ;| +select f("try_41_"); +# Two operations which compensate each other except that their net +# effect is that they advance the auto_increment counter of t2 on slave: +sync_slave_with_master; +use mysqltest1; +insert into t2 values(2,null),(3,null),(4,null); +delete from t2 where a>=2; + +connection master; +# this is the call which didn't replicate well +select f("try_42_"); +sync_slave_with_master; + +# now use prepared statement and test again, just to see that the RBB +# mode isn't set at PREPARE but at EXECUTE. + +insert into t2 values(3,null),(4,null); +delete from t2 where a>=3; + +connection master; +prepare stmt1 from 'select f(?)'; +set @string="try_43_"; +insert into t1 values(null,"try_44_"); # should be SBB +execute stmt1 using @string; # should be RBB +deallocate prepare stmt1; +sync_slave_with_master; + +# verify that if only one table has auto_inc, it does not trigger RBB +# (we'll check in binlog further below) + +connection master; +create table t12 select * from t1; # save for comparing later +drop table t1; +create table t1 (a int, b varchar(100), key(a)); +select f("try_45_"); + +# restore table's key +create table t13 select * from t1; +drop table t1; +create table t1 (a int primary key auto_increment, b varchar(100)); + +# now test if it's two functions, each of them inserts in one table + +drop function f; +# we need a unique key to have sorting of rows by mysqldump +create table t14 (unique (a)) select * from t2; +truncate table t2; +delimiter |; +create function f1 (x varchar(100)) returns int deterministic +begin + insert into t1 values(null,x); + return 1; +end| +create function f2 (x varchar(100)) returns int deterministic +begin + insert into t2 values(null,x); + return 1; +end| +delimiter ;| +select f1("try_46_"),f2("try_47_"); + +sync_slave_with_master; +insert into t2 values(2,null),(3,null),(4,null); +delete from t2 where a>=2; + +connection master; +# Test with SELECT and INSERT +select f1("try_48_"),f2("try_49_"); +insert into t3 values(concat("try_50_",f1("try_51_"),f2("try_52_"))); +sync_slave_with_master; + +# verify that if f2 does only read on an auto_inc table, this does not +# switch to RBB +connection master; +drop function f2; +delimiter |; +create function f2 (x varchar(100)) returns int deterministic +begin + declare y int; + insert into t1 values(null,x); + set y = (select count(*) from t2); + return y; +end| +delimiter ;| +select f1("try_53_"),f2("try_54_"); +sync_slave_with_master; + +# And now, a normal statement with a trigger (no stored functions) + +connection master; +drop function f2; +delimiter |; +create trigger t1_bi before insert on t1 for each row +begin + insert into t2 values(null,"try_55_"); +end| +delimiter ;| +insert into t1 values(null,"try_56_"); +# and now remove one auto_increment and verify SBB +alter table t1 modify a int, drop primary key; +insert into t1 values(null,"try_57_"); +sync_slave_with_master; + +# Test for BUG#20499 "mixed mode with temporary table breaks binlog" +# Slave used to have only 2 rows instead of 3. +connection master; +CREATE TEMPORARY TABLE t15 SELECT SYS_GUID(); +create table t16 like t15; +INSERT INTO t16 SELECT * FROM t15; +# we'll verify that this one is done RBB +insert into t16 values("try_65_"); +drop table t15; +# we'll verify that this one is done SBB +insert into t16 values("try_66_"); +sync_slave_with_master; + +# and now compare: + +connection master; + +# first check that data on master is sensible +select count(*) from t1; +select count(*) from t2; +select count(*) from t3; +select count(*) from t4; +select count(*) from t5; +select count(*) from t11; +select count(*) from t20; +select count(*) from t21; +select count(*) from t22; +select count(*) from t12; +select count(*) from t13; +select count(*) from t14; +select count(*) from t16; +if ($you_want_to_test_UDF) +{ + select count(*) from t6; + select count(*) from t7; + select count(*) from t8; + select count(*) from t9; +} + +sync_slave_with_master; + +# +# Bug#20863 If binlog format is changed between update and unlock of +# tables, wrong binlog +# + +connection master; +DROP TABLE IF EXISTS t11; +SET SESSION BINLOG_FORMAT=STATEMENT; +CREATE TABLE t11 (song VARCHAR(255)); +LOCK TABLES t11 WRITE; +SET SESSION BINLOG_FORMAT=ROW; +INSERT INTO t11 VALUES('Several Species of Small Furry Animals Gathered Together in a Cave and Grooving With a Pict'); +SET SESSION BINLOG_FORMAT=STATEMENT; +INSERT INTO t11 VALUES('Careful With That Axe, Eugene'); +UNLOCK TABLES; + +--query_vertical SELECT * FROM t11 +sync_slave_with_master; +USE mysqltest1; +--query_vertical SELECT * FROM t11 + +connection master; +DROP TABLE IF EXISTS t12; +SET SESSION BINLOG_FORMAT=MIXED; +CREATE TABLE t12 (data LONG); +LOCK TABLES t12 WRITE; +INSERT INTO t12 VALUES(SYS_GUID()); +UNLOCK TABLES; +sync_slave_with_master; + +# +# BUG#28086: SBR of USER() becomes corrupted on slave +# + +connection master; + +# Just to get something that is non-trivial, albeit still simple, we +# stuff the result of USER() and CURRENT_USER() into a variable. +--delimiter $$ +CREATE FUNCTION my_user() + RETURNS CHAR(64) +BEGIN + DECLARE user CHAR(64); + SELECT USER() INTO user; + RETURN user; +END $$ +--delimiter ; + +--delimiter $$ +CREATE FUNCTION my_current_user() + RETURNS CHAR(64) +BEGIN + DECLARE user CHAR(64); + SELECT CURRENT_USER() INTO user; + RETURN user; +END $$ +--delimiter ; + +DROP TABLE IF EXISTS t13; +CREATE TABLE t13 (data CHAR(64)); +INSERT INTO t13 VALUES (USER()); +INSERT INTO t13 VALUES (my_user()); +INSERT INTO t13 VALUES (CURRENT_USER()); +INSERT INTO t13 VALUES (my_current_user()); + +sync_slave_with_master; + +# as we're using SYS_GUID we don't SELECT but use "diff" like in rpl_row_UUID +--exec $MYSQL_DUMP --compact --order-by-primary --skip-extended-insert --no-create-info mysqltest1 > $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_master.sql +--exec $MYSQL_DUMP_SLAVE --compact --order-by-primary --skip-extended-insert --no-create-info mysqltest1 > $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_slave.sql + +# Let's compare. Note: If they match test will pass, if they do not match +# the test will show that the diff statement failed and not reject file +# will be created. You will need to go to the mysql-test dir and diff +# the files your self to see what is not matching + +diff_files $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_master.sql $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_slave.sql; + +connection master; + +# Now test that mysqlbinlog works fine on a binlog generated by the +# mixed mode + +# BUG#11312 "DELIMITER is not written to the binary log that causes +# syntax error" makes that mysqlbinlog will fail if we pass it the +# text of queries; this forces us to use --base64-output here. + +# BUG#20929 "BINLOG command causes invalid free plus assertion +# failure" makes mysqld segfault when receiving --base64-output + +# So I can't enable this piece of test +# SIGH + +if ($enable_when_11312_or_20929_fixed) +{ +--exec $MYSQL_BINLOG --base64-output $MYSQLTEST_VARDIR/log/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_mixed.sql +drop database mysqltest1; +--exec $MYSQL < $MYSQLTEST_VARDIR/tmp/mysqlbinlog_mixed.sql +--exec $MYSQL_DUMP --compact --order-by-primary --skip-extended-insert --no-create-info mysqltest1 > $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_master.sql +# the old mysqldump output on slave is the same as what it was on +# master before restoring on master. +diff_files $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_master.sql $MYSQLTEST_VARDIR/tmp/rpl_switch_stm_row_mixed_slave.sql; +} + +drop database mysqltest1; +sync_slave_with_master; + +connection master; +# Restore binlog format setting +set global binlog_format =@my_binlog_format; +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_sync.test b/mysql-test/suite/rpl/t/rpl_sync.test index bdb0d8ec4cc..1e2ec2ca83b 100644 --- a/mysql-test/suite/rpl/t/rpl_sync.test +++ b/mysql-test/suite/rpl/t/rpl_sync.test @@ -1,2 +1,159 @@ ---source include/rpl_sync_test.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +######################################################################################## +# This test verifies the options --sync-relay-log-info and --relay-log-recovery by +# crashing the slave in two different situations: +# (case-1) - Corrupt the relay log with changes which were not processed by +# the SQL Thread and crashes it. +# (case-2) - Corrupt the master.info with wrong coordinates and crashes it. +# +# Case 1: +# 1 - Stops the SQL Thread +# 2 - Inserts new records into the master. +# 3 - Corrupts the relay-log.bin* which most likely has such changes. +# 4 - Crashes the slave +# 5 - Verifies if the slave is sync with the master which means that the information +# loss was circumvented by the recovery process. +# +# Case 2: +# 1 - Stops the SQL/IO Threads +# 2 - Inserts new records into the master. +# 3 - Corrupts the master.info with wrong coordinates. +# 4 - Crashes the slave +# 5 - Verifies if the slave is sync with the master which means that the information +# loss was circumvented by the recovery process. +######################################################################################## + +######################################################################################## +# Configuring the environment +######################################################################################## +--echo =====Configuring the enviroment=======; +--source include/not_embedded.inc +--source include/not_valgrind.inc +--source include/have_debug.inc +--source include/have_innodb.inc +--source include/not_crashrep.inc +--source include/master-slave.inc + +call mtr.add_suppression('Attempting backtrace'); +call mtr.add_suppression("Recovery from master pos .* and file master-bin.000001"); +# Use innodb so we do not get "table should be repaired" issues. +ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB; +flush tables; +CREATE TABLE t1(a INT, PRIMARY KEY(a)) engine=innodb; + +insert into t1(a) values(1); +insert into t1(a) values(2); +insert into t1(a) values(3); + +######################################################################################## +# Case 1: Corrupt a relay-log.bin* +######################################################################################## +--echo =====Inserting data on the master but without the SQL Thread being running=======; +sync_slave_with_master; + +connection slave; +let $MYSQLD_SLAVE_DATADIR= `select @@datadir`; +--replace_result $MYSQLD_SLAVE_DATADIR MYSQLD_SLAVE_DATADIR +--copy_file $MYSQLD_SLAVE_DATADIR/master.info $MYSQLD_SLAVE_DATADIR/master.backup +--source include/stop_slave_sql.inc + +connection master; +insert into t1(a) values(4); +insert into t1(a) values(5); +insert into t1(a) values(6); + +--echo =====Removing relay log files and crashing/recoverying the slave=======; +connection slave; +--source include/stop_slave_io.inc + +let $file= query_get_value("SHOW SLAVE STATUS", Relay_Log_File, 1); + +--let FILE_TO_CORRUPT= $MYSQLD_SLAVE_DATADIR/$file +perl; +$file= $ENV{'FILE_TO_CORRUPT'}; +open(FILE, ">$file") || die "Unable to open $file."; +truncate(FILE,0); +print FILE "failure"; +close ($file); +EOF + +--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.2.expect +SET SESSION debug_dbug="d,crash_before_rotate_relaylog"; +--error 2013 +FLUSH LOGS; + +--let $rpl_server_number= 2 +--source include/rpl_reconnect.inc + +--echo =====Dumping and comparing tables=======; +--source include/start_slave.inc + +connection master; +sync_slave_with_master; + +let $diff_tables=master:t1,slave:t1; +source include/diff_tables.inc; + +######################################################################################## +# Case 2: Corrupt a master.info +######################################################################################## +--echo =====Corrupting the master.info=======; +connection slave; +--source include/stop_slave.inc + +connection master; +FLUSH LOGS; + +insert into t1(a) values(7); +insert into t1(a) values(8); +insert into t1(a) values(9); + +connection slave; +let MYSQLD_SLAVE_DATADIR=`select @@datadir`; + +--perl +use strict; +use warnings; +my $src= "$ENV{'MYSQLD_SLAVE_DATADIR'}/master.backup"; +my $dst= "$ENV{'MYSQLD_SLAVE_DATADIR'}/master.info"; +open(FILE, "<", $src) or die; +my @content= <FILE>; +close FILE; +open(FILE, ">", $dst) or die; +binmode FILE; +print FILE @content; +close FILE; +EOF + +--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.2.expect +SET SESSION debug_dbug="d,crash_before_rotate_relaylog"; +--error 2013 +FLUSH LOGS; + +--let $rpl_server_number= 2 +--source include/rpl_reconnect.inc + +--echo =====Dumping and comparing tables=======; +--source include/start_slave.inc + +connection master; +sync_slave_with_master; + +let $diff_tables=master:t1,slave:t1; +source include/diff_tables.inc; + +######################################################################################## +# Clean up +######################################################################################## +--echo =====Clean up=======; +connection master; +drop table t1; + +--remove_file $MYSQLD_SLAVE_DATADIR/master.backup +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_temporal_format_default_to_default.test b/mysql-test/suite/rpl/t/rpl_temporal_format_default_to_default.test index d976ae3757b..6728ff55d6f 100644 --- a/mysql-test/suite/rpl/t/rpl_temporal_format_default_to_default.test +++ b/mysql-test/suite/rpl/t/rpl_temporal_format_default_to_default.test @@ -1 +1,82 @@ ---source include/rpl_temporal_format_default_to_default.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption). +# Please check all dependent tests after modifying it +# + +--source include/master-slave.inc + +if ($force_master_mysql56_temporal_format) +{ + connection master; + eval SET @@global.mysql56_temporal_format=$force_master_mysql56_temporal_format; +} + +if ($force_slave_mysql56_temporal_format) +{ + connection slave; + eval SET @@global.mysql56_temporal_format=$force_slave_mysql56_temporal_format; +} + +connection master; +SELECT @@global.mysql56_temporal_format AS on_master; +connection slave; +SELECT @@global.mysql56_temporal_format AS on_slave; +connection master; + +CREATE TABLE t1 +( + c0 TIME(0), + c1 TIME(1), + c2 TIME(2), + c3 TIME(3), + c4 TIME(4), + c5 TIME(5), + c6 TIME(6) +); +CREATE TABLE t2 +( + c0 TIMESTAMP(0), + c1 TIMESTAMP(1), + c2 TIMESTAMP(2), + c3 TIMESTAMP(3), + c4 TIMESTAMP(4), + c5 TIMESTAMP(5), + c6 TIMESTAMP(6) +); + +CREATE TABLE t3 +( + c0 DATETIME(0), + c1 DATETIME(1), + c2 DATETIME(2), + c3 DATETIME(3), + c4 DATETIME(4), + c5 DATETIME(5), + c6 DATETIME(6) +); +INSERT INTO t1 VALUES ('01:01:01','01:01:01.1','01:01:01.11','01:01:01.111','01:01:01.1111','01:01:01.11111','01:01:01.111111'); +INSERT INTO t2 VALUES ('2001-01-01 01:01:01','2001-01-01 01:01:01.1','2001-01-01 01:01:01.11','2001-01-01 01:01:01.111','2001-01-01 01:01:01.1111','2001-01-01 01:01:01.11111','2001-01-01 01:01:01.111111'); +INSERT INTO t3 VALUES ('2001-01-01 01:01:01','2001-01-01 01:01:01.1','2001-01-01 01:01:01.11','2001-01-01 01:01:01.111','2001-01-01 01:01:01.1111','2001-01-01 01:01:01.11111','2001-01-01 01:01:01.111111'); +SELECT TABLE_NAME, TABLE_ROWS, AVG_ROW_LENGTH,DATA_LENGTH FROM INFORMATION_SCHEMA.TABLES +WHERE TABLE_NAME RLIKE 't[1-3]' ORDER BY TABLE_NAME; +sync_slave_with_master; + +connection slave; +--query_vertical SELECT * FROM t1; +--query_vertical SELECT * FROM t2; +--query_vertical SELECT * FROM t3; +SELECT TABLE_NAME, TABLE_ROWS, AVG_ROW_LENGTH,DATA_LENGTH FROM INFORMATION_SCHEMA.TABLES +WHERE TABLE_NAME RLIKE 't[1-3]' ORDER BY TABLE_NAME; + +connection master; +DROP TABLE t1; +DROP TABLE t2; +DROP TABLE t3; + +connection slave; +SET @@global.mysql56_temporal_format=DEFAULT; +connection master; +SET @@global.mysql56_temporal_format=DEFAULT; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_typeconv.test b/mysql-test/suite/rpl/t/rpl_typeconv.test index c2517086258..9e566258882 100644 --- a/mysql-test/suite/rpl/t/rpl_typeconv.test +++ b/mysql-test/suite/rpl/t/rpl_typeconv.test @@ -1 +1,78 @@ ---source include/rpl_typeconv.inc +# +# This include file is used by more than one test suite +# (currently rpl and binlog_encryption suite). +# Please check all dependent tests after modifying it +# + +--source include/have_binlog_format_row.inc +--source include/master-slave.inc + +connection slave; +set @saved_slave_type_conversions = @@global.slave_type_conversions; +CREATE TABLE type_conversions ( + TestNo INT AUTO_INCREMENT PRIMARY KEY, + Source TEXT, + Target TEXT, + Flags TEXT, + On_Master LONGTEXT, + On_Slave LONGTEXT, + Expected LONGTEXT, + Compare INT, + Error TEXT); + +SELECT @@global.slave_type_conversions; +SET GLOBAL SLAVE_TYPE_CONVERSIONS=''; +SELECT @@global.slave_type_conversions; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_NON_LOSSY'; +SELECT @@global.slave_type_conversions; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_LOSSY'; +SELECT @@global.slave_type_conversions; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_LOSSY,ALL_NON_LOSSY'; +SELECT @@global.slave_type_conversions; +--error ER_WRONG_VALUE_FOR_VAR +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_LOSSY,ALL_NON_LOSSY,NONEXISTING_BIT'; +SELECT @@global.slave_type_conversions; + +# Checking strict interpretation of type conversions +connection slave; +SET GLOBAL SLAVE_TYPE_CONVERSIONS=''; +source suite/rpl/include/type_conversions.test; + +# Checking lossy integer type conversions +connection slave; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_NON_LOSSY'; +source suite/rpl/include/type_conversions.test; + +# Checking non-lossy integer type conversions +connection slave; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_LOSSY'; +source suite/rpl/include/type_conversions.test; + +# Checking all type conversions +connection slave; +SET GLOBAL SLAVE_TYPE_CONVERSIONS='ALL_LOSSY,ALL_NON_LOSSY'; +source suite/rpl/include/type_conversions.test; + +connection slave; +--echo **** Result of conversions **** +disable_query_log; +SELECT RPAD(Source, 15, ' ') AS Source_Type, + RPAD(Target, 15, ' ') AS Target_Type, + RPAD(Flags, 25, ' ') AS All_Type_Conversion_Flags, + IF(Compare IS NULL AND Error IS NOT NULL, '<Correct error>', + IF(Compare, '<Correct value>', + CONCAT("'", On_Slave, "' != '", Expected, "'"))) + AS Value_On_Slave + FROM type_conversions; +enable_query_log; +DROP TABLE type_conversions; + +call mtr.add_suppression("Slave SQL.*Column 1 of table .test.t1. cannot be converted from type.* error.* 1677"); + +connection master; +DROP TABLE t1; +sync_slave_with_master; + +set global slave_type_conversions = @saved_slave_type_conversions; + +--source include/rpl_end.inc diff --git a/mysql-test/suite/rpl/t/rpl_xa_prepare_gtid_fail.test b/mysql-test/suite/rpl/t/rpl_xa_prepare_gtid_fail.test new file mode 100644 index 00000000000..8042b355754 --- /dev/null +++ b/mysql-test/suite/rpl/t/rpl_xa_prepare_gtid_fail.test @@ -0,0 +1,106 @@ +# +# When handling the replication of an XA PREPARE, the commit phase is +# bifurcated. First, the prepare is handled by the relevant storage engines. +# Then second,the GTID slave state is updated as a separate autocommit +# transaction. If the second stage fails, i.e. we are unable to update the +# GTID slave state, then the slave should immediately quit in error, without +# retry. +# +# This tests validates the above behavior by simulating a deadlock on the +# GTID slave state table during the second part of XA PREPARE's commit, to +# ensure that the appropriate error is reported and the transaction was never +# retried. +# +# +# References +# MDEV-31038: Parallel Replication Breaks if XA PREPARE Fails Updating Slave +# GTID State +# +source include/master-slave.inc; +source include/have_binlog_format_row.inc; +source include/have_innodb.inc; + +--connection slave +--source include/stop_slave.inc + +--let $save_par_thds= `SELECT @@global.slave_parallel_threads` +--let $save_strict_mode= `SELECT @@global.gtid_strict_mode` +--let $save_innodb_lock_wait_timeout= `SELECT @@global.innodb_lock_wait_timeout` + +change master to master_use_gtid=slave_pos; +set @@global.slave_parallel_threads= 4; +set @@global.slave_parallel_mode= optimistic; +set @@global.gtid_strict_mode=ON; + +set sql_log_bin= 0; +alter table mysql.gtid_slave_pos engine=innodb; +call mtr.add_suppression("Deadlock found.*"); +set sql_log_bin= 1; +--source include/start_slave.inc + +--connection master +let $datadir= `select @@datadir`; +create table t1 (a int primary key, b int) engine=innodb; +insert t1 values (1,1); +--source include/save_master_gtid.inc + +--connection slave +--source include/sync_with_master_gtid.inc +--source include/stop_slave.inc +set @@global.innodb_lock_wait_timeout= 1; + +--let $retried_tx_initial= query_get_value(SHOW ALL SLAVES STATUS, Retried_transactions, 1) + +--connection master +--let $gtid_domain_id=`SELECT @@GLOBAL.gtid_domain_id` +--let $gtid_server_id=`SELECT @@GLOBAL.server_id` +--let $xap_seq_no=100 +--eval set @@session.gtid_seq_no=$xap_seq_no +xa start '1'; +update t1 set b=b+10 where a=1; +xa end '1'; +xa prepare '1'; +--let $new_gtid= `SELECT @@global.gtid_binlog_pos` +xa commit '1'; +--source include/save_master_gtid.inc + + +--connection slave + +#--eval set statement sql_log_bin=0 for insert into mysql.gtid_slave_pos values ($gtid_domain_id, 5, $gtid_server_id, $xap_seq_no) + +--connection slave1 +BEGIN; +--eval SELECT * FROM mysql.gtid_slave_pos WHERE seq_no=$xap_seq_no FOR UPDATE + +--connection slave +--source include/start_slave.inc + +--let $slave_sql_errno= 1942,1213 +--source include/wait_for_slave_sql_error.inc + +--let $retried_tx_test= query_get_value(SHOW ALL SLAVES STATUS, Retried_transactions, 1) +if ($retried_tx_initial != $retried_tx_test) +{ + --echo Transaction was retried when a failed XA PREPARE slave GTID update should lead to immediate slave stop without retry + --die Transaction was retried when a failed XA PREPARE slave GTID update should lead to immediate slave stop without retry +} + +--connection slave1 +ROLLBACK; + +--echo # Cleanup + +--connection master +drop table t1; + +--connection slave +--source include/stop_slave.inc +--eval set @@global.gtid_slave_pos= "$new_gtid" +--eval set @@global.slave_parallel_threads= $save_par_thds +--eval set @@global.gtid_strict_mode= $save_strict_mode +--eval set @@global.innodb_lock_wait_timeout= $save_innodb_lock_wait_timeout +--source include/start_slave.inc + +--source include/rpl_end.inc +--echo # End of rpl_xa_prepare_gtid_fail.test |