path: root/pr/src/md/windows/w16io.c

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is the Netscape Portable Runtime (NSPR).
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998-2000
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "primpl.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <share.h>
#include <sys/locking.h>


/*
** Sleep this many milliseconds on each I/O operation
** to cause an intentional thread switch. 
*/
#define _PR_MD_WIN16_DELAY 1


/*
** PR_MD_RegisterW16StdioCallbacks() -- Register Win16 stdio callback functions
**
** This public function call is unique to Win16. 
** ... Sigh ... So much for platform independence.
** 
** To get stdio to work from a command line executable, the stdio stream
** calls must be issued from the .EXE file; calling them from the .DLL
** sends the output to the bit-bucket. Therefore, the .EXE wanting to
** do stdio to the console window (must be built as a "quickwin" application)
** must have the wrapper functions defined in this module statically linked
** into the .EXE.
**
** There appears to be nothing you can do to get stdio to work from a
** Win16 GUI application. Oh Well!
**
*/
PRStdinRead   _pr_md_read_stdin = 0;
PRStdoutWrite _pr_md_write_stdout = 0;
PRStderrWrite _pr_md_write_stderr = 0;

PRStatus
PR_MD_RegisterW16StdioCallbacks( PRStdinRead inReadf, PRStdoutWrite outWritef, PRStderrWrite errWritef )
{
    _pr_md_write_stdout = outWritef;
    _pr_md_write_stderr = errWritef;
    _pr_md_read_stdin   = inReadf;
    
    return(PR_SUCCESS);
} /* end PR_MD_RegisterW16StdioCallbacks() */


/*
** _PR_MD_OPEN() -- Open a file
**
** Returns: a fileHandle or -1
**
**
*/
PRInt32
_PR_MD_OPEN(const char *name, PRIntn osflags, int mode)
{
    PRInt32 file;
    int     access = O_BINARY;
    int     rights = 0;
    
    
    /*
    ** Map NSPR open flags to os open flags
    */
    if (osflags & PR_RDONLY )
        access |= O_RDONLY;
    if (osflags & PR_WRONLY )
        access |= O_WRONLY;
    if (osflags & PR_RDWR )
        access |= O_RDWR;
    if (osflags & PR_CREATE_FILE )
    {
        access |= O_CREAT;
        rights |= S_IRWXU;
    }
    if (osflags & PR_TRUNCATE)
        access |= O_TRUNC;
    if (osflags & PR_APPEND)
        access |= O_APPEND;
    else
        access |= O_RDONLY;
        
    /*
    ** Open the file
    */        
    file = (PRInt32) sopen( name, access, SH_DENYNO, rights );
    if ( -1 == (PRInt32)file )
    {
        _PR_MD_MAP_OPEN_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return file;
}

/*
** _PR_MD_READ() - Read something
**
** Returns: bytes read or -1
**
*/
PRInt32
_PR_MD_READ(PRFileDesc *fd, void *buf, PRInt32 len)
{
    PRInt32     rv;
    
    if ( (PR_GetDescType(fd) == PR_DESC_FILE) &&
         ( fd->secret->md.osfd == PR_StandardInput ) &&
         ( _pr_md_write_stdout ))
    {
        rv = (*_pr_md_read_stdin)( buf, len);    
    }
    else
    {
        rv = read( fd->secret->md.osfd, buf, len );
    }
    
    if ( rv == -1)
    {
        _PR_MD_MAP_READ_ERROR( errno );
    }
    
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
}

/*
** _PR_MD_WRITE() - Write something
**
** Returns:  bytes written or -1
**
** Note: for file handles 1 and 2 (stdout and stderr)
** call the Win16 NSPR stdio callback functions, if they are 
** registered.
**
*/
PRInt32
_PR_MD_WRITE(PRFileDesc *fd, const void *buf, PRInt32 len)
{
    PRInt32     rv;

    if ( (PR_GetDescType(fd) == PR_DESC_FILE))
    {
        switch ( fd->secret->md.osfd )
        {
            case  PR_StandardOutput :
                if ( _pr_md_write_stdout )
                    rv = (*_pr_md_write_stdout)( (void *)buf, len);
                else
                    rv = len; /* fake success */
                break;
                
            case  PR_StandardError  :
                if ( _pr_md_write_stderr )
                    rv = (*_pr_md_write_stderr)( (void *)buf, len);    
                else
                    rv = len; /* fake success */
                break;
                
            default:
                rv = write( fd->secret->md.osfd, buf, len );
                if ( rv == -1 )
                {
                    _PR_MD_MAP_WRITE_ERROR( errno );
                }
                break;
        }
    }
    else
    {
        rv = write( fd->secret->md.osfd, buf, len );
        if ( rv == -1 )
        {
            _PR_MD_MAP_WRITE_ERROR( errno );
        }
    }
    
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
} /* --- end _PR_MD_WRITE() --- */

/*
** _PR_MD_LSEEK() - Seek to position in a file
**
** Note: 'whence' maps directly to PR_...
**
** Returns:
**
*/
PRInt32
_PR_MD_LSEEK(PRFileDesc *fd, PRInt32 offset, int whence)
{
    PRInt32     rv;
    
    rv = lseek( fd->secret->md.osfd, offset, whence );
    if ( rv == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return( rv );
}

/*
** _PR_MD_LSEEK64() -- Seek to position in file, 64bit offset.
**
*/
PRInt64
_PR_MD_LSEEK64( PRFileDesc *fd, PRInt64 offset, int whence )
{
    PRInt64 test;
    PRInt32 rv, off;
    LL_SHR(test, offset, 32);
    if (!LL_IS_ZERO(test))
    {
        PR_SetError(PR_FILE_TOO_BIG_ERROR, 0);
        LL_I2L(test, -1);
        return test;
    }
    LL_L2I(off, offset);
    rv = _PR_MD_LSEEK(fd, off, whence);
    LL_I2L(test, rv);
    return test;
} /* end _PR_MD_LSEEK64() */

/*
** _PR_MD_FSYNC() - Flush file buffers.
**
** Returns:
**
**
*/
PRInt32
_PR_MD_FSYNC(PRFileDesc *fd)
{
    PRInt32     rv;
    
    rv = (PRInt32) fsync( fd->secret->md.osfd );
    if ( rv == -1 )
    {
        _PR_MD_MAP_FSYNC_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
}

/*
** _PR_MD_CLOSE() - Close an open file handle
**
** Returns:
**
**
*/
PRInt32
_PR_MD_CLOSE_FILE(PRInt32 osfd)
{
    PRInt32     rv;
    
    rv = (PRInt32) close( osfd );
    if ( rv == -1 )
    {
        _PR_MD_MAP_CLOSE_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
} /* --- end _MD_CloseFile() --- */


/* --- DIR IO ------------------------------------------------------------ */
#define GetFileFromDIR(d)       (d)->d_entry.cFileName

/*
** FlipSlashes() - Make forward slashes ('/') into backslashes
**
** Returns: void
**
**
*/
void FlipSlashes(char *cp, int len)
{
    while (--len >= 0) {
    if (cp[0] == '/') {
        cp[0] = PR_DIRECTORY_SEPARATOR;
    }
    cp++;
    }
}


/*
** _PR_MD_OPEN_DIR() - Open a Directory.
**
** Returns:
**
**
*/
PRStatus
_PR_MD_OPEN_DIR(_MDDir *d, const char *name)
{
    d->dir = opendir( name );
    
    if ( d->dir == NULL )
    {
        _PR_MD_MAP_OPENDIR_ERROR( errno );
        return( PR_FAILURE );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return( PR_SUCCESS );
}


/*
** _PR_MD_READ_DIR() - read next directory entry
**
**
*/
char *
_PR_MD_READ_DIR(_MDDir *d, PRIntn flags)
{
    struct dirent *de;
    int err;

	for (;;) 
    {
		de = readdir( d->dir );
		if ( de == NULL ) {
			_PR_MD_MAP_READDIR_ERROR( errno);
			return 0;
		}		
		if ((flags & PR_SKIP_DOT) &&
		    (de->d_name[0] == '.') && (de->d_name[1] == 0))
			continue;
		if ((flags & PR_SKIP_DOT_DOT) &&
		    (de->d_name[0] == '.') && (de->d_name[1] == '.') &&
		    (de->d_name[2] == 0))
			continue;
		break;
	}
    PR_Sleep( _PR_MD_WIN16_DELAY );    
	return de->d_name;
}

/*
** _PR_MD_CLOSE_DIR() - Close a directory.
**
**
*/
PRInt32
_PR_MD_CLOSE_DIR(_MDDir *d)
{
    PRInt32     rv;
    
    if ( d->dir ) 
    {
        rv = closedir( d->dir );
        if (rv != 0) 
        {
            _PR_MD_MAP_CLOSEDIR_ERROR( errno );
        }
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
}


/*
** _PR_MD_DELETE() - Delete a file.
**
** Returns:
**
**
*/
PRInt32
_PR_MD_DELETE(const char *name)
{
    PRInt32     rv;
    
    rv = (PRInt32) remove( name );
    if ( rv != 0 )
    {
        _PR_MD_MAP_DELETE_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
}


/*
** _PR_MD_STAT() - Get file attributes by filename
**
** Returns:
**
**
*/
PRInt32
_PR_MD_STAT(const char *fn, struct stat *info)
{
    PRInt32     rv;
    
    rv = _stat(fn, (struct _stat *)info);
    if ( rv == -1 )
    {
        _PR_MD_MAP_STAT_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return( rv );
}

/*
** _PR_MD_GETFILEINFO() - Get file attributes by filename
**
** Returns:
**
**
*/
PRInt32
_PR_MD_GETFILEINFO(const char *fn, PRFileInfo *info)
{
    struct _stat sb;
    PRInt32 rv;
 
    if ( (rv = _stat(fn, &sb)) == 0 ) {
        if (info) {
            if (S_IFREG & sb.st_mode)
                info->type = PR_FILE_FILE ;
            else if (S_IFDIR & sb.st_mode)
                info->type = PR_FILE_DIRECTORY;
            else
                info->type = PR_FILE_OTHER;
            info->size = sb.st_size;
            LL_I2L(info->modifyTime, sb.st_mtime);
            LL_I2L(info->creationTime, sb.st_ctime);
        }
    }
    else
    {
        _PR_MD_MAP_STAT_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
}

PRInt32
_PR_MD_GETFILEINFO64(const char *fn, PRFileInfo64 *info)
{
    PRFileInfo info32;
    
    PRInt32 rv = _PR_MD_GETFILEINFO(fn, &info32);
    if (0 == rv)
    {
        info->type = info32.type;
        info->modifyTime = info32.modifyTime;
        info->creationTime = info32.creationTime;
        LL_I2L(info->size, info32.size);
    }
    return(rv);
}

/*
** _PR_MD_GETOPENFILEINFO() - Get file attributes from an open file handle
**
** Returns:
**
**
*/
PRInt32
_PR_MD_GETOPENFILEINFO(const PRFileDesc *fd, PRFileInfo *info)
{
    struct stat statBuf;
    PRInt32 rv = PR_SUCCESS;
    
    rv = fstat( fd->secret->md.osfd, &statBuf );
    if ( rv == 0)
    {
        if (statBuf.st_mode & S_IFREG )
            info->type = PR_FILE_FILE;
        else if ( statBuf.st_mode & S_IFDIR )
            info->type = PR_FILE_DIRECTORY;
        else
            info->type = PR_FILE_OTHER;
        info->size = statBuf.st_size;
        LL_I2L(info->modifyTime, statBuf.st_mtime);
        LL_I2L(info->creationTime, statBuf.st_ctime);
        
    }
    else
    {
        _PR_MD_MAP_FSTAT_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
}

PRInt32
_PR_MD_GETOPENFILEINFO64(const PRFileDesc *fd, PRFileInfo64 *info)
{
    PRFileInfo info32;
    
    PRInt32 rv = _PR_MD_GETOPENFILEINFO(fd, &info32);
    if (0 == rv)
    {
        info->type = info32.type;
        info->modifyTime = info32.modifyTime;
        info->creationTime = info32.creationTime;
        LL_I2L(info->size, info32.size);
    }
    return(rv);
}

/*
** _PR_MD_RENAME() - Rename a file
**
** Returns:
**
**
*/
PRInt32
_PR_MD_RENAME(const char *from, const char *to)
{
    PRInt32 rv;
    
    rv = rename( from, to );
    if ( rv == -1 )
    {
        _PR_MD_MAP_RENAME_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return( rv );
}

/*
** _PR_MD_ACCESS() - Return file acesss attribute.
**
** Returns:
**
**
*/
PRInt32
_PR_MD_ACCESS(const char *name, PRIntn how)
{
    PRInt32     rv;
    int         mode = 0;
    
    if ( how & PR_ACCESS_WRITE_OK )
        mode |= W_OK;
    if ( how & PR_ACCESS_READ_OK )
        mode |= R_OK;
        
    rv = (PRInt32) access( name, mode );        
    if ( rv == -1 )
    {
        _PR_MD_MAP_ACCESS_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
}

/*
** _PR_MD_MKDIR() - Make a directory
**
** Returns:
**
**
*/
PRInt32
_PR_MD_MKDIR(const char *name, PRIntn mode)
{
    PRInt32 rv;
        
    rv = mkdir( name );
    if ( rv == 0 )
    {
        PR_Sleep( _PR_MD_WIN16_DELAY );    
        return PR_SUCCESS;
    }
    else
    {
        _PR_MD_MAP_MKDIR_ERROR( errno );
        PR_Sleep( _PR_MD_WIN16_DELAY );    
        return PR_FAILURE;
    }
}

/*
** _PR_MD_RMDIR() - Delete a directory
**
** Returns:
**
**
*/
PRInt32
_PR_MD_RMDIR(const char *name)
{
    PRInt32 rv;
    
    rv = (PRInt32) rmdir( name );
    if ( rv == -1 )
    {
        _PR_MD_MAP_RMDIR_ERROR( errno );
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return(rv);
}

/*
** _PR_MD_LOCKFILE() - Lock a file.
**
** The _locking() call locks relative to the current file pointer.
** This function is required to lock all of the file, so,
** 1. Seek to the beginning of the file, preserving the original position.
** 2. Lock the file, pausing if it is locked by someone else, and
**    try again.
** 3. Re-position to the original position in the file.
**
** For unlocking, a similar protocol of positioning is required.
**
*/
PRStatus
_PR_MD_LOCKFILE(PRInt32 f)
{
    PRInt32 rv = PR_SUCCESS;    /* What we return to our caller */
    long    seekOrigin;         /* original position in file */
    PRInt32 rc;                 /* what the system call returns to us */

    /*
    ** Seek to beginning of file, saving original position.
    */    
    seekOrigin = lseek( f, 0l, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        return( PR_FAILURE );
    }
    
    /*
    ** Attempt to lock the file.
    ** If someone else has it, Sleep-a-while and try again.
    */
    for( rc = -1; rc != 0; )
    {
        rc = _locking( f, _LK_NBLCK , 0x7fffffff );
        if ( rc == -1 )
        {
            if ( errno == EACCES )
            {
                PR_Sleep( 100 );
                continue;
            }
            else
            {
                _PR_MD_MAP_LOCKF_ERROR( errno );
                rv = PR_FAILURE;
                break;
            }
        }
    } /* end for() */
    
    /*
    ** Now that the file is locked, re-position to
    ** the original file position.
    **
    */
    rc = lseek( f, seekOrigin, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        rv = PR_FAILURE;
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return PR_SUCCESS;
} /* end _PR_MD_LOCKFILE() */

/*
** _PR_MD_TLOCKFILE() - Test and Lock file.
**
** The _locking() call locks relative to the current file pointer.
** This function is required to lock all of the file, so,
** 1. Seek to the beginning of the file, preserving the original position.
** 2. Attempt to Lock the file.
**    If the file is locked by someone else, try NO MORE.
** 3. Re-position to the original position in the file.
**
** See the discussion of _PR_MD_LOCKFILE
**
**
*/
PRStatus
_PR_MD_TLOCKFILE(PRInt32 f)
{
    PRInt32 rv = PR_SUCCESS;    /* What we return */
    long    seekOrigin;         /* original position in file */
    PRInt32 rc;                 /* return value from system call */

    /*
    ** Seek to beginning of file, saving original position.
    */    
    seekOrigin = lseek( f, 0l, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        return( PR_FAILURE );
    }
    
    /*
    ** Attempt to lock the file. One ping; one ping only, Vasily.
    ** If someone else has it, Reposition and return failure.
    */
    rc = _locking( f, _LK_NBLCK , 0x7fffffff );
    if ( rc == -1 )
    {
        if ( errno != EACCES )
            _PR_MD_MAP_LOCKF_ERROR( errno );
        rv = PR_FAILURE;
    }
    
    /*
    ** Now that the file is locked, maybe, re-position to
    ** the original file position.
    */
    rc = lseek( f, seekOrigin, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        rv = PR_FAILURE;
    }
    
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
} /* end _PR_MD_TLOCKFILE() */


/*
** _PR_MD_UNLOCKFILE() - Unlock a file.
**
** See the discussion of _PR_MD_LOCKFILE
**
*/
PRStatus
_PR_MD_UNLOCKFILE(PRInt32 f)
{
    PRInt32 rv = PR_SUCCESS;    /* What we return */
    long    seekOrigin;         /* original position in file */
    PRInt32 rc;                 /* return value from system call */

    /*
    ** Seek to beginning of file, saving original position.
    */    
    seekOrigin = lseek( f, 0l, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        return( PR_FAILURE );
    }
    
    /*
    ** Unlock the file.
    */
    rc = _locking( f, _LK_UNLCK , 0x7fffffff );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LOCKF_ERROR( errno );
        rv = PR_FAILURE;
    }
    
    /*
    ** Now that the file is unlocked, re-position to
    ** the original file position.
    */
    rc = lseek( f, seekOrigin, SEEK_SET );
    if ( rc == -1 )
    {
        _PR_MD_MAP_LSEEK_ERROR( errno );
        rv = PR_FAILURE;
    }
    PR_Sleep( _PR_MD_WIN16_DELAY );    
    return rv;
} /* end _PR_MD_UNLOCKFILE() */

/*
** PR_Stat() -- Return status on a file
**
** This is a hack! ... See BugSplat: 98516 
** Basically, this hack takes a name and stat buffer as input.
** The input stat buffer is presumed to be a Microsoft stat buffer.
** The functions does a Watcom stat() then maps the result to
** the MS stat buffer. ...
**
*/
PR_IMPLEMENT(PRInt32) PR_Stat(const char *name, struct stat *buf)
{
    PRInt32     rv;
    _MDMSStat   *mssb = (_MDMSStat*) buf; /* this is Microsoft's stat buffer */
    struct stat statBuf;   /* this is Watcom's stat buffer */

    /* First, get Watcom's idea of stat
    ** then reformat it into a Microsoft idea of stat
    */
    rv = (PRInt32) _stat( name, &statBuf);
    if (rv == 0l )
    {
        mssb->st_dev = statBuf.st_dev;
        mssb->st_ino = statBuf.st_ino; /* not used, really */
        mssb->st_mode = statBuf.st_mode;
        mssb->st_nlink = 1; /* always 1, says MS */
        mssb->st_uid = statBuf.st_uid;
        mssb->st_gid = statBuf.st_gid;
        mssb->st_rdev = statBuf.st_rdev; /* please Gh0d! Let these be the same */
        mssb->st_size = statBuf.st_size;
        mssb->st_atime = statBuf.st_atime;
        mssb->st_mtime = statBuf.st_mtime;
        mssb->st_ctime = statBuf.st_ctime;
    }
    return rv;
} /* end PR_Stat() */



/* $$ end W16io.c */