diff options
Diffstat (limited to 'mozilla/nsprpub/pr/include/prnetdb.h')
| -rw-r--r-- | mozilla/nsprpub/pr/include/prnetdb.h | 499 |
1 files changed, 499 insertions, 0 deletions
diff --git a/mozilla/nsprpub/pr/include/prnetdb.h b/mozilla/nsprpub/pr/include/prnetdb.h new file mode 100644 index 0000000..f1b7ddc --- /dev/null +++ b/mozilla/nsprpub/pr/include/prnetdb.h @@ -0,0 +1,499 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#ifndef prnetdb_h___ +#define prnetdb_h___ + +#include "prtypes.h" +#include "prio.h" + +PR_BEGIN_EXTERN_C + + +/* + ********************************************************************* + * Translate an Internet address to/from a character string + ********************************************************************* + */ +NSPR_API(PRStatus) PR_StringToNetAddr( + const char *string, PRNetAddr *addr); + +NSPR_API(PRStatus) PR_NetAddrToString( + const PRNetAddr *addr, char *string, PRUint32 size); + +/* +** Structures returned by network data base library. All addresses are +** supplied in host order, and returned in network order (suitable for +** use in system calls). +*/ +/* +** Beware that WINSOCK.H defines h_addrtype and h_length as short. +** Client code does direct struct copies of hostent to PRHostEnt and +** hence the ifdef. +*/ +typedef struct PRHostEnt { + char *h_name; /* official name of host */ + char **h_aliases; /* alias list */ +#ifdef WIN32 + PRInt16 h_addrtype; /* host address type */ + PRInt16 h_length; /* length of address */ +#else + PRInt32 h_addrtype; /* host address type */ + PRInt32 h_length; /* length of address */ +#endif + char **h_addr_list; /* list of addresses from name server */ +} PRHostEnt; + +/* A safe size to use that will mostly work... */ +#if (defined(AIX) && defined(_THREAD_SAFE)) || defined(OSF1) +#define PR_NETDB_BUF_SIZE sizeof(struct protoent_data) +#else +#define PR_NETDB_BUF_SIZE 1024 +#endif + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetHostByName() +** Lookup a host by name. +** +** INPUTS: +** char *hostname Character string defining the host name of interest +** char *buf A scratch buffer for the runtime to return result. +** This buffer is allocated by the caller. +** PRIntn bufsize Number of bytes in 'buf'. A recommnded value to +** use is PR_NETDB_BUF_SIZE. +** OUTPUTS: +** PRHostEnt *hostentry +** This structure is filled in by the runtime if +** the function returns PR_SUCCESS. This structure +** is allocated by the caller. +** RETURN: +** PRStatus PR_SUCCESS if the lookup succeeds. If it fails +** the result will be PR_FAILURE and the reason +** for the failure can be retrieved by PR_GetError(). +***********************************************************************/ +NSPR_API(PRStatus) PR_GetHostByName( + const char *hostname, char *buf, PRIntn bufsize, PRHostEnt *hostentry); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetIPNodeByName() +** Lookup a host by name. Equivalent to getipnodebyname(AI_DEFAULT) +** of RFC 2553. +** +** INPUTS: +** char *hostname Character string defining the host name of interest +** PRUint16 af Address family (either PR_AF_INET or PR_AF_INET6) +** PRIntn flags Specifies the types of addresses that are searched +** for and the types of addresses that are returned. +** The only supported flag is PR_AI_DEFAULT. +** char *buf A scratch buffer for the runtime to return result. +** This buffer is allocated by the caller. +** PRIntn bufsize Number of bytes in 'buf'. A recommnded value to +** use is PR_NETDB_BUF_SIZE. +** OUTPUTS: +** PRHostEnt *hostentry +** This structure is filled in by the runtime if +** the function returns PR_SUCCESS. This structure +** is allocated by the caller. +** RETURN: +** PRStatus PR_SUCCESS if the lookup succeeds. If it fails +** the result will be PR_FAILURE and the reason +** for the failure can be retrieved by PR_GetError(). +***********************************************************************/ + + +#define PR_AI_ALL 0x08 +#define PR_AI_V4MAPPED 0x10 +#define PR_AI_ADDRCONFIG 0x20 +#define PR_AI_NOCANONNAME 0x8000 +#define PR_AI_DEFAULT (PR_AI_V4MAPPED | PR_AI_ADDRCONFIG) + +NSPR_API(PRStatus) PR_GetIPNodeByName( + const char *hostname, + PRUint16 af, + PRIntn flags, + char *buf, + PRIntn bufsize, + PRHostEnt *hostentry); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetHostByAddr() +** Lookup a host entry by its network address. +** +** INPUTS: +** char *hostaddr IP address of host in question +** char *buf A scratch buffer for the runtime to return result. +** This buffer is allocated by the caller. +** PRIntn bufsize Number of bytes in 'buf'. A recommnded value to +** use is PR_NETDB_BUF_SIZE. +** OUTPUTS: +** PRHostEnt *hostentry +** This structure is filled in by the runtime if +** the function returns PR_SUCCESS. This structure +** is allocated by the caller. +** RETURN: +** PRStatus PR_SUCCESS if the lookup succeeds. If it fails +** the result will be PR_FAILURE and the reason +** for the failure can be retrieved by PR_GetError(). +***********************************************************************/ +NSPR_API(PRStatus) PR_GetHostByAddr( + const PRNetAddr *hostaddr, char *buf, PRIntn bufsize, PRHostEnt *hostentry); + +/*********************************************************************** +** FUNCTION: PR_EnumerateHostEnt() +** DESCRIPTION: +** A stateless enumerator over a PRHostEnt structure acquired from +** PR_GetHostByName() PR_GetHostByAddr() to evaluate the possible +** network addresses. +** +** INPUTS: +** PRIntn enumIndex Index of the enumeration. The enumeration starts +** and ends with a value of zero. +** +** PRHostEnt *hostEnt A pointer to a host entry struct that was +** previously returned by PR_GetHostByName() or +** PR_GetHostByAddr(). +** +** PRUint16 port The port number to be assigned as part of the +** PRNetAddr. +** +** OUTPUTS: +** PRNetAddr *address A pointer to an address structure that will be +** filled in by the call to the enumeration if the +** result of the call is greater than zero. +** +** RETURN: +** PRIntn The value that should be used for the next call +** of the enumerator ('enumIndex'). The enumeration +** is ended if this value is returned zero. +** If a value of -1 is returned, the enumeration +** has failed. The reason for the failure can be +** retrieved by calling PR_GetError(). +***********************************************************************/ +NSPR_API(PRIntn) PR_EnumerateHostEnt( + PRIntn enumIndex, const PRHostEnt *hostEnt, PRUint16 port, PRNetAddr *address); + +/*********************************************************************** +** FUNCTION: PR_InitializeNetAddr(), +** DESCRIPTION: +** Initialize the fields of a PRNetAddr, assigning well known values as +** appropriate. +** +** INPUTS +** PRNetAddrValue val The value to be assigned to the IP Address portion +** of the network address. This can only specify the +** special well known values that are equivalent to +** INADDR_ANY and INADDR_LOOPBACK. +** +** PRUint16 port The port number to be assigned in the structure. +** +** OUTPUTS: +** PRNetAddr *addr The address to be manipulated. +** +** RETURN: +** PRStatus To indicate success or failure. If the latter, the +** reason for the failure can be retrieved by calling +** PR_GetError(); +***********************************************************************/ +typedef enum PRNetAddrValue +{ + PR_IpAddrNull, /* do NOT overwrite the IP address */ + PR_IpAddrAny, /* assign logical INADDR_ANY to IP address */ + PR_IpAddrLoopback, /* assign logical INADDR_LOOPBACK */ + PR_IpAddrV4Mapped /* IPv4 mapped address */ +} PRNetAddrValue; + +NSPR_API(PRStatus) PR_InitializeNetAddr( + PRNetAddrValue val, PRUint16 port, PRNetAddr *addr); + +/*********************************************************************** +** FUNCTION: PR_SetNetAddr(), +** DESCRIPTION: +** Set the fields of a PRNetAddr, assigning well known values as +** appropriate. This function is similar to PR_InitializeNetAddr +** but differs in that the address family is specified. +** +** INPUTS +** PRNetAddrValue val The value to be assigned to the IP Address portion +** of the network address. This can only specify the +** special well known values that are equivalent to +** INADDR_ANY and INADDR_LOOPBACK. +** +** PRUint16 af The address family (either PR_AF_INET or PR_AF_INET6) +** +** PRUint16 port The port number to be assigned in the structure. +** +** OUTPUTS: +** PRNetAddr *addr The address to be manipulated. +** +** RETURN: +** PRStatus To indicate success or failure. If the latter, the +** reason for the failure can be retrieved by calling +** PR_GetError(); +***********************************************************************/ +NSPR_API(PRStatus) PR_SetNetAddr( + PRNetAddrValue val, PRUint16 af, PRUint16 port, PRNetAddr *addr); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_IsNetAddrType() +** Determine if the network address is of the specified type. +** +** INPUTS: +** const PRNetAddr *addr A network address. +** PRNetAddrValue The type of network address +** +** RETURN: +** PRBool PR_TRUE if the network address is of the +** specified type, else PR_FALSE. +***********************************************************************/ +NSPR_API(PRBool) PR_IsNetAddrType(const PRNetAddr *addr, PRNetAddrValue val); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_ConvertIPv4AddrToIPv6() +** Convert an IPv4 addr to an (IPv4-mapped) IPv6 addr +** +** INPUTS: +** PRUint32 v4addr IPv4 address +** +** OUTPUTS: +** PRIPv6Addr *v6addr The converted IPv6 address +** +** RETURN: +** void +** +***********************************************************************/ +NSPR_API(void) PR_ConvertIPv4AddrToIPv6(PRUint32 v4addr, PRIPv6Addr *v6addr); + +/*********************************************************************** +** MACRO: +** DESCRIPTION: PR_NetAddrFamily() +** Get the 'family' field of a PRNetAddr union. +** +** INPUTS: +** const PRNetAddr *addr A network address. +** +** RETURN: +** PRUint16 The 'family' field of 'addr'. +***********************************************************************/ +#define PR_NetAddrFamily(addr) ((addr)->raw.family) + +/*********************************************************************** +** MACRO: +** DESCRIPTION: PR_NetAddrInetPort() +** Get the 'port' field of a PRNetAddr union. +** +** INPUTS: +** const PRNetAddr *addr A network address. +** +** RETURN: +** PRUint16 The 'port' field of 'addr'. +***********************************************************************/ +#define PR_NetAddrInetPort(addr) \ + ((addr)->raw.family == PR_AF_INET6 ? (addr)->ipv6.port : (addr)->inet.port) + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetProtoByName() +** Lookup a protocol entry based on protocol's name +** +** INPUTS: +** char *protocolname Character string of the protocol's name. +** char *buf A scratch buffer for the runtime to return result. +** This buffer is allocated by the caller. +** PRIntn bufsize Number of bytes in 'buf'. A recommnded value to +** use is PR_NETDB_BUF_SIZE. +** OUTPUTS: +** PRHostEnt *PRProtoEnt +** This structure is filled in by the runtime if +** the function returns PR_SUCCESS. This structure +** is allocated by the caller. +** RETURN: +** PRStatus PR_SUCCESS if the lookup succeeds. If it fails +** the result will be PR_FAILURE and the reason +** for the failure can be retrieved by PR_GetError(). +***********************************************************************/ + +typedef struct PRProtoEnt { + char *p_name; /* official protocol name */ + char **p_aliases; /* alias list */ +#ifdef WIN32 + PRInt16 p_num; /* protocol # */ +#else + PRInt32 p_num; /* protocol # */ +#endif +} PRProtoEnt; + +NSPR_API(PRStatus) PR_GetProtoByName( + const char* protocolname, char* buffer, PRInt32 bufsize, PRProtoEnt* result); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetProtoByNumber() +** Lookup a protocol entry based on protocol's number +** +** INPUTS: +** PRInt32 protocolnumber +** Number assigned to the protocol. +** char *buf A scratch buffer for the runtime to return result. +** This buffer is allocated by the caller. +** PRIntn bufsize Number of bytes in 'buf'. A recommnded value to +** use is PR_NETDB_BUF_SIZE. +** OUTPUTS: +** PRHostEnt *PRProtoEnt +** This structure is filled in by the runtime if +** the function returns PR_SUCCESS. This structure +** is allocated by the caller. +** RETURN: +** PRStatus PR_SUCCESS if the lookup succeeds. If it fails +** the result will be PR_FAILURE and the reason +** for the failure can be retrieved by PR_GetError(). +***********************************************************************/ +NSPR_API(PRStatus) PR_GetProtoByNumber( + PRInt32 protocolnumber, char* buffer, PRInt32 bufsize, PRProtoEnt* result); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetAddrInfoByName() +** Look up a host by name. Equivalent to getaddrinfo(host, NULL, ...) of +** RFC 3493. +** +** INPUTS: +** char *hostname Character string defining the host name of interest +** PRUint16 af May be PR_AF_UNSPEC or PR_AF_INET. +** PRIntn flags May be either PR_AI_ADDRCONFIG or +** PR_AI_ADDRCONFIG | PR_AI_NOCANONNAME. Include +** PR_AI_NOCANONNAME to suppress the determination of +** the canonical name corresponding to hostname. +** RETURN: +** PRAddrInfo* Handle to a data structure containing the results +** of the host lookup. Use PR_EnumerateAddrInfo to +** inspect the PRNetAddr values stored in this object. +** When no longer needed, this handle must be destroyed +** with a call to PR_FreeAddrInfo. If a lookup error +** occurs, then NULL will be returned. +***********************************************************************/ +typedef struct PRAddrInfo PRAddrInfo; + +NSPR_API(PRAddrInfo*) PR_GetAddrInfoByName( + const char *hostname, PRUint16 af, PRIntn flags); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_FreeAddrInfo() +** Destroy the PRAddrInfo handle allocated by PR_GetAddrInfoByName(). +** +** INPUTS: +** PRAddrInfo *addrInfo +** The handle resulting from a successful call to +** PR_GetAddrInfoByName(). +** RETURN: +** void +***********************************************************************/ +NSPR_API(void) PR_FreeAddrInfo(PRAddrInfo *addrInfo); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_EnumerateAddrInfo() +** A stateless enumerator over a PRAddrInfo handle acquired from +** PR_GetAddrInfoByName() to inspect the possible network addresses. +** +** INPUTS: +** void *enumPtr Index pointer of the enumeration. The enumeration +** starts and ends with a value of NULL. +** const PRAddrInfo *addrInfo +** The PRAddrInfo handle returned by a successful +** call to PR_GetAddrInfoByName(). +** PRUint16 port The port number to be assigned as part of the +** PRNetAddr. +** OUTPUTS: +** PRNetAddr *result A pointer to an address structure that will be +** filled in by the call to the enumeration if the +** result of the call is not NULL. +** RETURN: +** void* The value that should be used for the next call +** of the enumerator ('enumPtr'). The enumeration +** is ended if this value is NULL. +***********************************************************************/ +NSPR_API(void *) PR_EnumerateAddrInfo( + void *enumPtr, const PRAddrInfo *addrInfo, PRUint16 port, PRNetAddr *result); + +/*********************************************************************** +** FUNCTION: +** DESCRIPTION: PR_GetCanonNameFromAddrInfo() +** Extracts the canonical name of the hostname passed to +** PR_GetAddrInfoByName(). +** +** INPUTS: +** const PRAddrInfo *addrInfo +** The PRAddrInfo handle returned by a successful +** call to PR_GetAddrInfoByName(). +** RETURN: +** const char * A const pointer to the canonical hostname stored +** in the given PRAddrInfo handle. This pointer is +** invalidated once the PRAddrInfo handle is destroyed +** by a call to PR_FreeAddrInfo(). +***********************************************************************/ +NSPR_API(const char *) PR_GetCanonNameFromAddrInfo( + const PRAddrInfo *addrInfo); + +/*********************************************************************** +** FUNCTIONS: PR_ntohs, PR_ntohl, PR_ntohll, PR_htons, PR_htonl, PR_htonll +** +** DESCRIPTION: API entries for the common byte ordering routines. +** +** PR_ntohs 16 bit conversion from network to host +** PR_ntohl 32 bit conversion from network to host +** PR_ntohll 64 bit conversion from network to host +** PR_htons 16 bit conversion from host to network +** PR_htonl 32 bit conversion from host to network +** PR_ntonll 64 bit conversion from host to network +** +***********************************************************************/ +NSPR_API(PRUint16) PR_ntohs(PRUint16); +NSPR_API(PRUint32) PR_ntohl(PRUint32); +NSPR_API(PRUint64) PR_ntohll(PRUint64); +NSPR_API(PRUint16) PR_htons(PRUint16); +NSPR_API(PRUint32) PR_htonl(PRUint32); +NSPR_API(PRUint64) PR_htonll(PRUint64); + +PR_END_EXTERN_C + +#endif /* prnetdb_h___ */ |