diff options
Diffstat (limited to 'mozilla/nsprpub/pr/src/cplus/tests/ranfile.cpp')
| -rw-r--r-- | mozilla/nsprpub/pr/src/cplus/tests/ranfile.cpp | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/mozilla/nsprpub/pr/src/cplus/tests/ranfile.cpp b/mozilla/nsprpub/pr/src/cplus/tests/ranfile.cpp new file mode 100644 index 0000000..b745b15 --- /dev/null +++ b/mozilla/nsprpub/pr/src/cplus/tests/ranfile.cpp @@ -0,0 +1,432 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** +** Contact: AOF<mailto:freier@netscape.com> +** +** Name: ranfile.c +** +** Description: Test to hammer on various components of NSPR +** Modification History: +** 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +***********************************************************************/ + + +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include <plgetopt.h> +#include <prprf.h> +#include <prio.h> + +#include "rccv.h" +#include "rcthread.h" +#include "rcfileio.h" +#include "rclock.h" + +#include <string.h> +#include <stdio.h> +#include <stdlib.h> + +static PRFileDesc *output; +static PRIntn debug_mode = 0; +static PRIntn failed_already = 0; + +class HammerData +{ +public: + typedef enum { + sg_go, sg_stop, sg_done} Action; + typedef enum { + sg_okay, sg_open, sg_close, sg_delete, sg_write, sg_seek} Problem; + + virtual ~HammerData(); + HammerData(RCLock* lock, RCCondition *cond, PRUint32 clip); + virtual PRUint32 Random(); + + Action action; + Problem problem; + PRUint32 writes; + RCInterval timein; +friend class Hammer; +private: + RCLock *ml; + RCCondition *cv; + PRUint32 limit; + + PRFloat64 seed; +}; /* HammerData */ + +class Hammer: public HammerData, public RCThread +{ +public: + virtual ~Hammer(); + Hammer(RCThread::Scope scope, RCLock* lock, RCCondition *cond, PRUint32 clip); + +private: + void RootFunction(); + +}; + +static PRInt32 pageSize = 1024; +static const char* baseName = "./"; +static const char *programName = "Random File"; + +/*********************************************************************** +** PRIVATE FUNCTION: Random +** DESCRIPTION: +** Generate a pseudo-random number +** INPUTS: None +** OUTPUTS: None +** RETURN: A pseudo-random unsigned number, 32-bits wide +** SIDE EFFECTS: +** Updates random seed (a static) +** RESTRICTIONS: +** None +** MEMORY: NA +** ALGORITHM: +** Uses the current interval timer value, promoted to a 64 bit +** float as a multiplier for a static residue (which begins +** as an uninitialized variable). The result is bits [16..48) +** of the product. Seed is then updated with the return value +** promoted to a float-64. +***********************************************************************/ +PRUint32 HammerData::Random() +{ + PRUint32 rv; + PRUint64 shift; + RCInterval now = RCInterval(RCInterval::now); + PRFloat64 random = seed * (PRFloat64)((PRIntervalTime)now); + LL_USHR(shift, *((PRUint64*)&random), 16); + LL_L2UI(rv, shift); + seed = (PRFloat64)rv; + return rv; +} /* HammerData::Random */ + +Hammer::~Hammer() { } + +Hammer::Hammer( + RCThread::Scope scope, RCLock* lock, RCCondition *cond, PRUint32 clip): + HammerData(lock, cond, clip), RCThread(scope, RCThread::joinable, 0) { } + +HammerData::~HammerData() { } + +HammerData::HammerData(RCLock* lock, RCCondition *cond, PRUint32 clip) +{ + ml = lock; + cv = cond; + writes = 0; + limit = clip; + seed = 0x58a9382; + action = HammerData::sg_go; + problem = HammerData::sg_okay; + timein = RCInterval(RCInterval::now); +} /* HammerData::HammerData */ + + +/*********************************************************************** +** PRIVATE FUNCTION: Hammer::RootFunction +** DESCRIPTION: +** Hammer on the file I/O system +** INPUTS: A pointer to the thread's private data +** OUTPUTS: None +** RETURN: None +** SIDE EFFECTS: +** Creates, accesses and deletes a file +** RESTRICTIONS: +** (Currently) must have file create permission in "/usr/tmp". +** MEMORY: NA +** ALGORITHM: +** This function is a root of a thread +** 1) Creates a (hopefully) unique file in /usr/tmp/ +** 2) Writes a zero to a random number of sequential pages +** 3) Closes the file +** 4) Reopens the file +** 5) Seeks to a random page within the file +** 6) Writes a one byte on that page +** 7) Repeat steps [5..6] for each page in the file +** 8) Close and delete the file +** 9) Repeat steps [1..8] until told to stop +** 10) Notify complete and return +***********************************************************************/ +void Hammer::RootFunction() +{ + PRUint32 index; + RCFileIO file; + char filename[30]; + const char zero = 0; + PRStatus rv = PR_SUCCESS; + + limit = (Random() % limit) + 1; + + (void)sprintf(filename, "%ssg%04p.dat", baseName, this); + + if (debug_mode) PR_fprintf(output, "Starting work on %s\n", filename); + + while (PR_TRUE) + { + PRUint64 bytes; + PRUint32 minor = (Random() % limit) + 1; + PRUint32 random = (Random() % limit) + 1; + PRUint32 pages = (Random() % limit) + 10; + while (minor-- > 0) + { + problem = sg_okay; + if (action != sg_go) goto finished; + problem = sg_open; + rv = file.Open(filename, PR_RDWR|PR_CREATE_FILE, 0666); + if (PR_FAILURE == rv) goto finished; + for (index = 0; index < pages; index++) + { + problem = sg_okay; + if (action != sg_go) goto close; + problem = sg_seek; + bytes = file.Seek(pageSize * index, RCFileIO::set); + if (bytes != pageSize * index) goto close; + problem = sg_write; + bytes = file.Write(&zero, sizeof(zero)); + if (bytes <= 0) goto close; + writes += 1; + } + problem = sg_close; + rv = file.Close(); + if (rv != PR_SUCCESS) goto purge; + + problem = sg_okay; + if (action != sg_go) goto purge; + + problem = sg_open; + rv = file.Open(filename, PR_RDWR, 0666); + if (PR_FAILURE == rv) goto finished; + for (index = 0; index < pages; index++) + { + problem = sg_okay; + if (action != sg_go) goto close; + problem = sg_seek; + bytes = file.Seek(pageSize * index, RCFileIO::set); + if (bytes != pageSize * index) goto close; + problem = sg_write; + bytes = file.Write(&zero, sizeof(zero)); + if (bytes <= 0) goto close; + writes += 1; + random = (random + 511) % pages; + } + problem = sg_close; + rv = file.Close(); + if (rv != PR_SUCCESS) goto purge; + problem = sg_delete; + rv = file.Delete(filename); + if (rv != PR_SUCCESS) goto finished; + } + } + +close: + (void)file.Close(); +purge: + (void)file.Delete(filename); +finished: + RCEnter scope(ml); + action = HammerData::sg_done; + cv->Notify(); + + if (debug_mode) PR_fprintf(output, "Ending work on %s\n", filename); + + return; +} /* Hammer::RootFunction */ + +static Hammer* hammer[100]; +/*********************************************************************** +** PRIVATE FUNCTION: main +** DESCRIPTION: +** Hammer on the file I/O system +** INPUTS: The usual argc and argv +** argv[0] - program name (not used) +** argv[1] - the number of virtual_procs to execute the major loop +** argv[2] - the number of threads to toss into the batch +** argv[3] - the clipping number applied to randoms +** default values: max_virtual_procs = 2, threads = 10, limit = 57 +** OUTPUTS: None +** RETURN: None +** SIDE EFFECTS: +** Creates, accesses and deletes lots of files +** RESTRICTIONS: +** (Currently) must have file create permission in "/usr/tmp". +** MEMORY: NA +** ALGORITHM: +** 1) Fork a "Thread()" +** 2) Wait for 'interleave' seconds +** 3) For [0..'threads') repeat [1..2] +** 4) Mark all objects to stop +** 5) Collect the threads, accumulating the results +** 6) For [0..'max_virtual_procs') repeat [1..5] +** 7) Print accumulated results and exit +** +** Characteristic output (from IRIX) +** Random File: Using max_virtual_procs = 2, threads = 10, limit = 57 +** Random File: [min [avg] max] writes/sec average +***********************************************************************/ +PRIntn main (PRIntn argc, char *argv[]) +{ + RCLock ml; + PLOptStatus os; + RCCondition cv(&ml); + PRUint32 writesMax = 0, durationTot = 0; + RCThread::Scope thread_scope = RCThread::local; + PRUint32 writes, writesMin = 0x7fffffff, writesTot = 0; + PRIntn active, poll, limit = 0, max_virtual_procs = 0, threads = 0, virtual_procs; + RCInterval interleave(RCInterval::FromMilliseconds(10000)), duration(0); + + const char *where[] = {"okay", "open", "close", "delete", "write", "seek"}; + + PLOptState *opt = PL_CreateOptState(argc, argv, "Gdl:t:i:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 0: + baseName = opt->value; + break; + case 'G': /* global threads */ + thread_scope = RCThread::global; + break; + case 'd': /* debug mode */ + debug_mode = 1; + break; + case 'l': /* limiting number */ + limit = atoi(opt->value); + break; + case 't': /* number of threads */ + threads = atoi(opt->value); + break; + case 'i': /* iteration counter */ + max_virtual_procs = atoi(opt->value); + break; + default: + break; + } + } + PL_DestroyOptState(opt); + output = PR_GetSpecialFD(PR_StandardOutput); + + /* main test */ + + cv.SetTimeout(interleave); + + if (max_virtual_procs == 0) max_virtual_procs = 2; + if (limit == 0) limit = 57; + if (threads == 0) threads = 10; + + if (debug_mode) PR_fprintf(output, + "%s: Using %d virtual processors, %d threads, limit = %d and %s threads\n", + programName, max_virtual_procs, threads, limit, + (thread_scope == RCThread::local) ? "LOCAL" : "GLOBAL"); + + for (virtual_procs = 0; virtual_procs < max_virtual_procs; ++virtual_procs) + { + if (debug_mode) + PR_fprintf(output, + "%s: Setting number of virtual processors to %d\n", + programName, virtual_procs + 1); + RCPrimordialThread::SetVirtualProcessors(virtual_procs + 1); + for (active = 0; active < threads; active++) + { + hammer[active] = new Hammer(thread_scope, &ml, &cv, limit); + hammer[active]->Start(); /* then make it roll */ + RCThread::Sleep(interleave); /* start them slowly */ + } + + /* + * The last thread started has had the opportunity to run for + * 'interleave' seconds. Now gather them all back in. + */ + { + RCEnter scope(&ml); + for (poll = 0; poll < threads; poll++) + { + if (hammer[poll]->action == HammerData::sg_go) /* don't overwrite done */ + hammer[poll]->action = HammerData::sg_stop; /* ask him to stop */ + } + } + + while (active > 0) + { + for (poll = 0; poll < threads; poll++) + { + ml.Acquire(); + while (hammer[poll]->action < HammerData::sg_done) cv.Wait(); + ml.Release(); + + if (hammer[poll]->problem == HammerData::sg_okay) + { + duration = RCInterval(RCInterval::now) - hammer[poll]->timein; + writes = hammer[poll]->writes * 1000 / duration; + if (writes < writesMin) writesMin = writes; + if (writes > writesMax) writesMax = writes; + writesTot += hammer[poll]->writes; + durationTot += duration; + } + else + { + if (debug_mode) PR_fprintf(output, + "%s: test failed %s after %ld seconds\n", + programName, where[hammer[poll]->problem], duration); + else failed_already=1; + } + active -= 1; /* this is another one down */ + (void)hammer[poll]->Join(); + hammer[poll] = NULL; + } + } + if (debug_mode) PR_fprintf(output, + "%s: [%ld [%ld] %ld] writes/sec average\n", + programName, writesMin, + writesTot * 1000 / durationTot, writesMax); + } + + failed_already |= (PR_FAILURE == RCPrimordialThread::Cleanup()); + PR_fprintf(output, "%s\n", (failed_already) ? "FAIL\n" : "PASS\n"); + return failed_already; +} /* main */ |