summaryrefslogtreecommitdiff
path: root/pr/include/private/primpl.h
diff options
context:
space:
mode:
Diffstat (limited to 'pr/include/private/primpl.h')
-rw-r--r--pr/include/private/primpl.h2128
1 files changed, 2128 insertions, 0 deletions
diff --git a/pr/include/private/primpl.h b/pr/include/private/primpl.h
new file mode 100644
index 0000000..0467819
--- /dev/null
+++ b/pr/include/private/primpl.h
@@ -0,0 +1,2128 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef primpl_h___
+#define primpl_h___
+
+/*
+ * HP-UX 10.10's pthread.h (DCE threads) includes dce/cma.h, which
+ * has:
+ * #define sigaction _sigaction_sys
+ * This macro causes chaos if signal.h gets included before pthread.h.
+ * To be safe, we include pthread.h first.
+ */
+
+#if defined(_PR_PTHREADS)
+#include <pthread.h>
+#endif
+
+#if defined(_PR_BTHREADS)
+#include <kernel/OS.h>
+#endif
+
+#ifdef WIN32
+/*
+ * Allow use of functions and symbols first defined in Win2k.
+ */
+#if !defined(WINVER) || (WINVER < 0x0500)
+#undef WINVER
+#define WINVER 0x0500
+#endif
+#if !defined(_WIN32_WINNT) || (_WIN32_WINNT < 0x0500)
+#undef _WIN32_WINNT
+#define _WIN32_WINNT 0x0500
+#endif
+#endif /* WIN32 */
+
+#include "nspr.h"
+#include "prpriv.h"
+
+typedef struct PRSegment PRSegment;
+
+#include "md/prosdep.h"
+#include "obsolete/probslet.h"
+
+#ifdef _PR_HAVE_POSIX_SEMAPHORES
+#include <semaphore.h>
+#elif defined(_PR_HAVE_SYSV_SEMAPHORES)
+#include <sys/sem.h>
+#endif
+
+/*************************************************************************
+***** A Word about Model Dependent Function Naming Convention ***********
+*************************************************************************/
+
+/*
+NSPR 2.0 must implement its function across a range of platforms
+including: MAC, Windows/16, Windows/95, Windows/NT, and several
+variants of Unix. Each implementation shares common code as well
+as having platform dependent portions. This standard describes how
+the model dependent portions are to be implemented.
+
+In header file pr/include/primpl.h, each publicly declared
+platform dependent function is declared as:
+
+NSPR_API void _PR_MD_FUNCTION( long arg1, long arg2 );
+#define _PR_MD_FUNCTION _MD_FUNCTION
+
+In header file pr/include/md/<platform>/_<platform>.h,
+each #define'd macro is redefined as one of:
+
+#define _MD_FUNCTION <blanks>
+#define _MD_FUNCTION <expanded macro>
+#define _MD_FUNCTION <osFunction>
+#define _MD_FUNCTION <_MD_Function>
+
+Where:
+
+<blanks> is no definition at all. In this case, the function is not implemented
+and is never called for this platform.
+For example:
+#define _MD_INIT_CPUS()
+
+<expanded macro> is a C language macro expansion.
+For example:
+#define _MD_CLEAN_THREAD(_thread) \
+ PR_BEGIN_MACRO \
+ PR_DestroyCondVar(_thread->md.asyncIOCVar); \
+ PR_DestroyLock(_thread->md.asyncIOLock); \
+ PR_END_MACRO
+
+<osFunction> is some function implemented by the host operating system.
+For example:
+#define _MD_EXIT exit
+
+<_MD_function> is the name of a function implemented for this platform in
+pr/src/md/<platform>/<soruce>.c file.
+For example:
+#define _MD_GETFILEINFO _MD_GetFileInfo
+
+In <source>.c, the implementation is:
+PR_IMPLEMENT(PRInt32) _MD_GetFileInfo(const char *fn, PRFileInfo *info);
+*/
+
+PR_BEGIN_EXTERN_C
+
+typedef struct _MDLock _MDLock;
+typedef struct _MDCVar _MDCVar;
+typedef struct _MDSegment _MDSegment;
+typedef struct _MDThread _MDThread;
+typedef struct _MDThreadStack _MDThreadStack;
+typedef struct _MDSemaphore _MDSemaphore;
+typedef struct _MDDir _MDDir;
+#ifdef MOZ_UNICODE
+typedef struct _MDDirUTF16 _MDDirUTF16;
+#endif /* MOZ_UNICODE */
+typedef struct _MDFileDesc _MDFileDesc;
+typedef struct _MDProcess _MDProcess;
+typedef struct _MDFileMap _MDFileMap;
+
+#if defined(_PR_PTHREADS)
+
+/*
+** The following definitions are unique to implementing NSPR using pthreads.
+** Since pthreads defines most of the thread and thread synchronization
+** stuff, this is a pretty small set.
+*/
+
+#define PT_CV_NOTIFIED_LENGTH 6
+typedef struct _PT_Notified _PT_Notified;
+struct _PT_Notified
+{
+ PRIntn length; /* # of used entries in this structure */
+ struct
+ {
+ PRCondVar *cv; /* the condition variable notified */
+ PRIntn times; /* and the number of times notified */
+ } cv[PT_CV_NOTIFIED_LENGTH];
+ _PT_Notified *link; /* link to another of these | NULL */
+};
+
+/*
+ * bits defined for pthreads 'state' field
+ */
+#define PT_THREAD_DETACHED 0x01 /* thread can't be joined */
+#define PT_THREAD_GLOBAL 0x02 /* a global thread (unlikely) */
+#define PT_THREAD_SYSTEM 0x04 /* system (not user) thread */
+#define PT_THREAD_PRIMORD 0x08 /* this is the primordial thread */
+#define PT_THREAD_ABORTED 0x10 /* thread has been interrupted */
+#define PT_THREAD_GCABLE 0x20 /* thread is garbage collectible */
+#define PT_THREAD_SUSPENDED 0x40 /* thread has been suspended */
+#define PT_THREAD_FOREIGN 0x80 /* thread is not one of ours */
+#define PT_THREAD_BOUND 0x100 /* a bound-global thread */
+
+#define _PT_THREAD_INTERRUPTED(thr) \
+ (!(thr->interrupt_blocked) && (thr->state & PT_THREAD_ABORTED))
+#define _PT_THREAD_BLOCK_INTERRUPT(thr) \
+ (thr->interrupt_blocked = 1)
+#define _PT_THREAD_UNBLOCK_INTERRUPT(thr) \
+ (thr->interrupt_blocked = 0)
+
+#define _PT_IS_GCABLE_THREAD(thr) ((thr)->state & PT_THREAD_GCABLE)
+
+/*
+** Possible values for thread's suspend field
+** Note that the first two can be the same as they are really mutually exclusive,
+** i.e. both cannot be happening at the same time. We have two symbolic names
+** just as a mnemonic.
+**/
+#define PT_THREAD_RESUMED 0x80 /* thread has been resumed */
+#define PT_THREAD_SETGCABLE 0x100 /* set the GCAble flag */
+
+#if defined(DEBUG)
+
+typedef struct PTDebug
+{
+ PRTime timeStarted;
+ PRUintn locks_created, locks_destroyed;
+ PRUintn locks_acquired, locks_released;
+ PRUintn cvars_created, cvars_destroyed;
+ PRUintn cvars_notified, delayed_cv_deletes;
+} PTDebug;
+
+#endif /* defined(DEBUG) */
+
+NSPR_API(void) PT_FPrintStats(PRFileDesc *fd, const char *msg);
+
+#else /* defined(_PR_PTHREADS) */
+
+NSPR_API(void) PT_FPrintStats(PRFileDesc *fd, const char *msg);
+
+/*
+** This section is contains those parts needed to implement NSPR on
+** platforms in general. One would assume that the pthreads implementation
+** included lots of the same types, at least conceptually.
+*/
+
+/*
+ * Local threads only. No multiple CPU support and hence all the
+ * following routines are no-op.
+ */
+#ifdef _PR_LOCAL_THREADS_ONLY
+
+#define _PR_MD_SUSPEND_THREAD(thread)
+#define _PR_MD_RESUME_THREAD(thread)
+#define _PR_MD_SUSPEND_CPU(cpu)
+#define _PR_MD_RESUME_CPU(cpu)
+#define _PR_MD_BEGIN_SUSPEND_ALL()
+#define _PR_MD_END_SUSPEND_ALL()
+#define _PR_MD_BEGIN_RESUME_ALL()
+#define _PR_MD_END_RESUME_ALL()
+#define _PR_MD_INIT_ATTACHED_THREAD(thread) PR_FAILURE
+
+#endif
+
+typedef struct _PRCPUQueue _PRCPUQueue;
+typedef struct _PRCPU _PRCPU;
+typedef struct _MDCPU _MDCPU;
+
+struct _PRCPUQueue {
+ _MDLock runQLock; /* lock for the run + wait queues */
+ _MDLock sleepQLock; /* lock for the run + wait queues */
+ _MDLock miscQLock; /* lock for the run + wait queues */
+
+ PRCList runQ[PR_PRIORITY_LAST + 1]; /* run queue for this CPU */
+ PRUint32 runQReadyMask;
+ PRCList sleepQ;
+ PRIntervalTime sleepQmax;
+ PRCList pauseQ;
+ PRCList suspendQ;
+ PRCList waitingToJoinQ;
+
+ PRUintn numCPUs; /* number of CPUs using this Q */
+};
+
+struct _PRCPU {
+ PRCList links; /* link list of CPUs */
+ PRUint32 id; /* id for this CPU */
+
+ union {
+ PRInt32 bits;
+ PRUint8 missed[4];
+ } u;
+ PRIntn where; /* index into u.missed */
+ PRPackedBool paused; /* cpu is paused */
+ PRPackedBool exit; /* cpu should exit */
+
+ PRThread *thread; /* native thread for this CPUThread */
+ PRThread *idle_thread; /* user-level idle thread for this CPUThread */
+
+ PRIntervalTime last_clock; /* the last time we went into
+ * _PR_ClockInterrupt() on this CPU
+ */
+
+ _PRCPUQueue *queue;
+
+ _MDCPU md;
+};
+
+typedef struct _PRInterruptTable {
+ const char *name;
+ PRUintn missed_bit;
+ void (*handler)(void);
+} _PRInterruptTable;
+
+#define _PR_CPU_PTR(_qp) \
+ ((_PRCPU*) ((char*) (_qp) - offsetof(_PRCPU,links)))
+
+#if !defined(IRIX) && !defined(WIN32) && !defined(XP_OS2) \
+ && !(defined(SOLARIS) && defined(_PR_GLOBAL_THREADS_ONLY))
+#define _MD_GET_ATTACHED_THREAD() (_PR_MD_CURRENT_THREAD())
+#endif
+
+#ifdef _PR_LOCAL_THREADS_ONLY
+
+NSPR_API(struct _PRCPU *) _pr_currentCPU;
+NSPR_API(PRThread *) _pr_currentThread;
+NSPR_API(PRThread *) _pr_lastThread;
+NSPR_API(PRInt32) _pr_intsOff;
+
+#define _MD_CURRENT_CPU() (_pr_currentCPU)
+#define _MD_SET_CURRENT_CPU(_cpu) (_pr_currentCPU = (_cpu))
+#define _MD_CURRENT_THREAD() (_pr_currentThread)
+#define _MD_SET_CURRENT_THREAD(_thread) (_pr_currentThread = (_thread))
+#define _MD_LAST_THREAD() (_pr_lastThread)
+#define _MD_SET_LAST_THREAD(t) (_pr_lastThread = t)
+
+#define _MD_GET_INTSOFF() (_pr_intsOff)
+#define _MD_SET_INTSOFF(_val) (_pr_intsOff = _val)
+
+
+/* The unbalanced curly braces in these two macros are intentional */
+#define _PR_LOCK_HEAP() { PRIntn _is; if (_pr_currentCPU) _PR_INTSOFF(_is);
+#define _PR_UNLOCK_HEAP() if (_pr_currentCPU) _PR_INTSON(_is); }
+
+#endif /* _PR_LOCAL_THREADS_ONLY */
+
+extern PRInt32 _native_threads_only;
+
+#if defined(_PR_GLOBAL_THREADS_ONLY)
+
+#define _MD_GET_INTSOFF() 0
+#define _MD_SET_INTSOFF(_val)
+#define _PR_INTSOFF(_is)
+#define _PR_FAST_INTSON(_is)
+#define _PR_INTSON(_is)
+#define _PR_THREAD_LOCK(_thread)
+#define _PR_THREAD_UNLOCK(_thread)
+#define _PR_RUNQ_LOCK(cpu)
+#define _PR_RUNQ_UNLOCK(cpu)
+#define _PR_SLEEPQ_LOCK(thread)
+#define _PR_SLEEPQ_UNLOCK(thread)
+#define _PR_MISCQ_LOCK(thread)
+#define _PR_MISCQ_UNLOCK(thread)
+#define _PR_CPU_LIST_LOCK()
+#define _PR_CPU_LIST_UNLOCK()
+
+#define _PR_ADD_RUNQ(_thread, _cpu, _pri)
+#define _PR_DEL_RUNQ(_thread)
+#define _PR_ADD_SLEEPQ(_thread, _timeout)
+#define _PR_DEL_SLEEPQ(_thread, _propogate)
+#define _PR_ADD_JOINQ(_thread, _cpu)
+#define _PR_DEL_JOINQ(_thread)
+#define _PR_ADD_SUSPENDQ(_thread, _cpu)
+#define _PR_DEL_SUSPENDQ(_thread)
+
+#define _PR_THREAD_SWITCH_CPU(_thread, _newCPU)
+
+#define _PR_IS_NATIVE_THREAD(thread) 1
+#define _PR_IS_NATIVE_THREAD_SUPPORTED() 1
+
+#else
+
+#define _PR_INTSOFF(_is) \
+ PR_BEGIN_MACRO \
+ (_is) = _PR_MD_GET_INTSOFF(); \
+ _PR_MD_SET_INTSOFF(1); \
+ PR_END_MACRO
+
+#define _PR_FAST_INTSON(_is) \
+ PR_BEGIN_MACRO \
+ _PR_MD_SET_INTSOFF(_is); \
+ PR_END_MACRO
+
+#define _PR_INTSON(_is) \
+ PR_BEGIN_MACRO \
+ if ((_is == 0) && (_PR_MD_CURRENT_CPU())->u.bits) \
+ _PR_IntsOn((_PR_MD_CURRENT_CPU())); \
+ _PR_MD_SET_INTSOFF(_is); \
+ PR_END_MACRO
+
+#ifdef _PR_LOCAL_THREADS_ONLY
+
+#define _PR_IS_NATIVE_THREAD(thread) 0
+#define _PR_THREAD_LOCK(_thread)
+#define _PR_THREAD_UNLOCK(_thread)
+#define _PR_RUNQ_LOCK(cpu)
+#define _PR_RUNQ_UNLOCK(cpu)
+#define _PR_SLEEPQ_LOCK(thread)
+#define _PR_SLEEPQ_UNLOCK(thread)
+#define _PR_MISCQ_LOCK(thread)
+#define _PR_MISCQ_UNLOCK(thread)
+#define _PR_CPU_LIST_LOCK()
+#define _PR_CPU_LIST_UNLOCK()
+
+#define _PR_ADD_RUNQ(_thread, _cpu, _pri) \
+ PR_BEGIN_MACRO \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_RUNQ(_cpu)[_pri]); \
+ _PR_RUNQREADYMASK(_cpu) |= (1L << _pri); \
+ PR_END_MACRO
+
+#define _PR_DEL_RUNQ(_thread) \
+ PR_BEGIN_MACRO \
+ _PRCPU *_cpu = _thread->cpu; \
+ PRInt32 _pri = _thread->priority; \
+ PR_REMOVE_LINK(&(_thread)->links); \
+ if (PR_CLIST_IS_EMPTY(&_PR_RUNQ(_cpu)[_pri])) \
+ _PR_RUNQREADYMASK(_cpu) &= ~(1L << _pri); \
+ PR_END_MACRO
+
+#define _PR_ADD_SLEEPQ(_thread, _timeout) \
+ _PR_AddSleepQ(_thread, _timeout);
+
+#define _PR_DEL_SLEEPQ(_thread, _propogate) \
+ _PR_DelSleepQ(_thread, _propogate);
+
+#define _PR_ADD_JOINQ(_thread, _cpu) \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_WAITINGTOJOINQ(_cpu));
+
+#define _PR_DEL_JOINQ(_thread) \
+ PR_REMOVE_LINK(&(_thread)->links);
+
+#define _PR_ADD_SUSPENDQ(_thread, _cpu) \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_SUSPENDQ(_cpu));
+
+#define _PR_DEL_SUSPENDQ(_thread) \
+ PR_REMOVE_LINK(&(_thread)->links);
+
+#define _PR_THREAD_SWITCH_CPU(_thread, _newCPU)
+
+#define _PR_IS_NATIVE_THREAD_SUPPORTED() 0
+
+#else /* _PR_LOCAL_THREADS_ONLY */
+
+/* These are for the "combined" thread model */
+
+#define _PR_THREAD_LOCK(_thread) \
+ _PR_MD_LOCK(&(_thread)->threadLock);
+
+#define _PR_THREAD_UNLOCK(_thread) \
+ _PR_MD_UNLOCK(&(_thread)->threadLock);
+
+#define _PR_RUNQ_LOCK(_cpu) \
+ PR_BEGIN_MACRO \
+ _PR_MD_LOCK(&(_cpu)->queue->runQLock );\
+ PR_END_MACRO
+
+#define _PR_RUNQ_UNLOCK(_cpu) \
+ PR_BEGIN_MACRO \
+ _PR_MD_UNLOCK(&(_cpu)->queue->runQLock );\
+ PR_END_MACRO
+
+#define _PR_SLEEPQ_LOCK(_cpu) \
+ _PR_MD_LOCK(&(_cpu)->queue->sleepQLock );
+
+#define _PR_SLEEPQ_UNLOCK(_cpu) \
+ _PR_MD_UNLOCK(&(_cpu)->queue->sleepQLock );
+
+#define _PR_MISCQ_LOCK(_cpu) \
+ _PR_MD_LOCK(&(_cpu)->queue->miscQLock );
+
+#define _PR_MISCQ_UNLOCK(_cpu) \
+ _PR_MD_UNLOCK(&(_cpu)->queue->miscQLock );
+
+#define _PR_CPU_LIST_LOCK() _PR_MD_LOCK(&_pr_cpuLock)
+#define _PR_CPU_LIST_UNLOCK() _PR_MD_UNLOCK(&_pr_cpuLock)
+
+#define QUEUE_RUN 0x1
+#define QUEUE_SLEEP 0x2
+#define QUEUE_JOIN 0x4
+#define QUEUE_SUSPEND 0x8
+#define QUEUE_LOCK 0x10
+
+#define _PR_ADD_RUNQ(_thread, _cpu, _pri) \
+ PR_BEGIN_MACRO \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_RUNQ(_cpu)[_pri]); \
+ _PR_RUNQREADYMASK(_cpu) |= (1L << _pri); \
+ PR_ASSERT((_thread)->queueCount == 0); \
+ (_thread)->queueCount = QUEUE_RUN; \
+ PR_END_MACRO
+
+#define _PR_DEL_RUNQ(_thread) \
+ PR_BEGIN_MACRO \
+ _PRCPU *_cpu = _thread->cpu; \
+ PRInt32 _pri = _thread->priority; \
+ PR_REMOVE_LINK(&(_thread)->links); \
+ if (PR_CLIST_IS_EMPTY(&_PR_RUNQ(_cpu)[_pri])) \
+ _PR_RUNQREADYMASK(_cpu) &= ~(1L << _pri); \
+ PR_ASSERT((_thread)->queueCount == QUEUE_RUN);\
+ (_thread)->queueCount = 0; \
+ PR_END_MACRO
+
+#define _PR_ADD_SLEEPQ(_thread, _timeout) \
+ PR_ASSERT((_thread)->queueCount == 0); \
+ (_thread)->queueCount = QUEUE_SLEEP; \
+ _PR_AddSleepQ(_thread, _timeout);
+
+#define _PR_DEL_SLEEPQ(_thread, _propogate) \
+ PR_ASSERT((_thread)->queueCount == QUEUE_SLEEP);\
+ (_thread)->queueCount = 0; \
+ _PR_DelSleepQ(_thread, _propogate);
+
+#define _PR_ADD_JOINQ(_thread, _cpu) \
+ PR_ASSERT((_thread)->queueCount == 0); \
+ (_thread)->queueCount = QUEUE_JOIN; \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_WAITINGTOJOINQ(_cpu));
+
+#define _PR_DEL_JOINQ(_thread) \
+ PR_ASSERT((_thread)->queueCount == QUEUE_JOIN);\
+ (_thread)->queueCount = 0; \
+ PR_REMOVE_LINK(&(_thread)->links);
+
+#define _PR_ADD_SUSPENDQ(_thread, _cpu) \
+ PR_ASSERT((_thread)->queueCount == 0); \
+ (_thread)->queueCount = QUEUE_SUSPEND; \
+ PR_APPEND_LINK(&(_thread)->links, &_PR_SUSPENDQ(_cpu));
+
+#define _PR_DEL_SUSPENDQ(_thread) \
+ PR_ASSERT((_thread)->queueCount == QUEUE_SUSPEND);\
+ (_thread)->queueCount = 0; \
+ PR_REMOVE_LINK(&(_thread)->links);
+
+#define _PR_THREAD_SWITCH_CPU(_thread, _newCPU) \
+ (_thread)->cpu = (_newCPU);
+
+#define _PR_IS_NATIVE_THREAD(thread) (thread->flags & _PR_GLOBAL_SCOPE)
+#define _PR_IS_NATIVE_THREAD_SUPPORTED() 1
+
+#endif /* _PR_LOCAL_THREADS_ONLY */
+
+#endif /* _PR_GLOBAL_THREADS_ONLY */
+
+#define _PR_SET_RESCHED_FLAG() _PR_MD_CURRENT_CPU()->u.missed[3] = 1
+#define _PR_CLEAR_RESCHED_FLAG() _PR_MD_CURRENT_CPU()->u.missed[3] = 0
+
+extern _PRInterruptTable _pr_interruptTable[];
+
+/* Bits for _pr_interruptState.u.missed[0,1] */
+#define _PR_MISSED_CLOCK 0x1
+#define _PR_MISSED_IO 0x2
+#define _PR_MISSED_CHILD 0x4
+
+extern void _PR_IntsOn(_PRCPU *cpu);
+
+NSPR_API(void) _PR_WakeupCPU(void);
+NSPR_API(void) _PR_PauseCPU(void);
+
+/************************************************************************/
+
+#define _PR_LOCK_LOCK(_lock) \
+ _PR_MD_LOCK(&(_lock)->ilock);
+#define _PR_LOCK_UNLOCK(_lock) \
+ _PR_MD_UNLOCK(&(_lock)->ilock);
+
+extern void _PR_UnblockLockWaiter(PRLock *lock);
+
+#define _PR_LOCK_PTR(_qp) \
+ ((PRLock*) ((char*) (_qp) - offsetof(PRLock,links)))
+
+/************************************************************************/
+
+#define _PR_CVAR_LOCK(_cvar) \
+ _PR_MD_LOCK(&(_cvar)->ilock);
+#define _PR_CVAR_UNLOCK(_cvar) \
+ _PR_MD_UNLOCK(&(_cvar)->ilock);
+
+extern PRStatus _PR_WaitCondVar(
+ PRThread *thread, PRCondVar *cvar, PRLock *lock, PRIntervalTime timeout);
+extern PRUint32 _PR_CondVarToString(PRCondVar *cvar, char *buf, PRUint32 buflen);
+
+NSPR_API(void) _PR_Notify(PRMonitor *mon, PRBool all, PRBool sticky);
+
+/* PRThread.flags */
+#define _PR_SYSTEM 0x01
+#define _PR_INTERRUPT 0x02
+#define _PR_ATTACHED 0x04 /* created via PR_AttachThread */
+#define _PR_PRIMORDIAL 0x08 /* the thread that called PR_Init */
+#define _PR_ON_SLEEPQ 0x10 /* thread is on the sleepQ */
+#define _PR_ON_PAUSEQ 0x20 /* thread is on the pauseQ */
+#define _PR_SUSPENDING 0x40 /* thread wants to suspend */
+#define _PR_GLOBAL_SCOPE 0x80 /* thread is global scope */
+#define _PR_IDLE_THREAD 0x200 /* this is an idle thread */
+#define _PR_GCABLE_THREAD 0x400 /* this is a collectable thread */
+#define _PR_BOUND_THREAD 0x800 /* a bound thread */
+#define _PR_INTERRUPT_BLOCKED 0x1000 /* interrupts blocked */
+
+/* PRThread.state */
+#define _PR_UNBORN 0
+#define _PR_RUNNABLE 1
+#define _PR_RUNNING 2
+#define _PR_LOCK_WAIT 3
+#define _PR_COND_WAIT 4
+#define _PR_JOIN_WAIT 5
+#define _PR_IO_WAIT 6
+#define _PR_SUSPENDED 7
+#define _PR_DEAD_STATE 8 /* for debugging */
+
+/* PRThreadStack.flags */
+#define _PR_STACK_VM 0x1 /* using vm instead of malloc */
+#define _PR_STACK_MAPPED 0x2 /* vm is mapped */
+#define _PR_STACK_PRIMORDIAL 0x4 /* stack for primordial thread */
+
+/*
+** If the default stcksize from the client is zero, we need to pick a machine
+** dependent value. This is only for standard user threads. For custom threads,
+** 0 has a special meaning.
+** Adjust stackSize. Round up to a page boundary.
+*/
+
+#ifndef _MD_MINIMUM_STACK_SIZE
+#define _MD_MINIMUM_STACK_SIZE 0
+#endif
+
+#if (!defined(HAVE_CUSTOM_USER_THREADS))
+#define _PR_ADJUST_STACKSIZE(stackSize) \
+ PR_BEGIN_MACRO \
+ if (stackSize == 0) \
+ stackSize = _MD_DEFAULT_STACK_SIZE; \
+ if (stackSize < _MD_MINIMUM_STACK_SIZE) \
+ stackSize = _MD_MINIMUM_STACK_SIZE; \
+ stackSize = (stackSize + (1 << _pr_pageShift) - 1) >> _pr_pageShift; \
+ stackSize <<= _pr_pageShift; \
+ PR_END_MACRO
+#else
+#define _PR_ADJUST_STACKSIZE(stackSize)
+#endif
+
+#define _PR_IS_GCABLE_THREAD(thr) ((thr)->flags & _PR_GCABLE_THREAD)
+
+#define _PR_PENDING_INTERRUPT(thr) \
+ (!((thr)->flags & _PR_INTERRUPT_BLOCKED) && ((thr)->flags & _PR_INTERRUPT))
+#define _PR_THREAD_BLOCK_INTERRUPT(thr) \
+ (thr->flags |= _PR_INTERRUPT_BLOCKED)
+#define _PR_THREAD_UNBLOCK_INTERRUPT(thr) \
+ (thr->flags &= ~_PR_INTERRUPT_BLOCKED)
+
+#define _PR_THREAD_PTR(_qp) \
+ ((PRThread*) ((char*) (_qp) - offsetof(PRThread,links)))
+
+#define _PR_ACTIVE_THREAD_PTR(_qp) \
+ ((PRThread*) ((char*) (_qp) - offsetof(PRThread,active)))
+
+#define _PR_THREAD_CONDQ_PTR(_qp) \
+ ((PRThread*) ((char*) (_qp) - offsetof(PRThread,waitQLinks)))
+
+#define _PR_THREAD_MD_TO_PTR(_md) \
+ ((PRThread*) ((char*) (_md) - offsetof(PRThread,md)))
+
+#define _PR_THREAD_STACK_TO_PTR(_stack) \
+ ((PRThread*) (_stack->thr))
+
+extern PRCList _pr_active_local_threadQ;
+extern PRCList _pr_active_global_threadQ;
+extern PRCList _pr_cpuQ;
+extern _MDLock _pr_cpuLock;
+extern PRInt32 _pr_md_idle_cpus;
+
+#define _PR_ACTIVE_LOCAL_THREADQ() _pr_active_local_threadQ
+#define _PR_ACTIVE_GLOBAL_THREADQ() _pr_active_global_threadQ
+#define _PR_CPUQ() _pr_cpuQ
+#define _PR_RUNQ(_cpu) ((_cpu)->queue->runQ)
+#define _PR_RUNQREADYMASK(_cpu) ((_cpu)->queue->runQReadyMask)
+#define _PR_SLEEPQ(_cpu) ((_cpu)->queue->sleepQ)
+#define _PR_SLEEPQMAX(_cpu) ((_cpu)->queue->sleepQmax)
+#define _PR_PAUSEQ(_cpu) ((_cpu)->queue->pauseQ)
+#define _PR_SUSPENDQ(_cpu) ((_cpu)->queue->suspendQ)
+#define _PR_WAITINGTOJOINQ(_cpu) ((_cpu)->queue->waitingToJoinQ)
+
+extern PRUint32 _pr_recycleThreads; /* Flag for behavior on thread cleanup */
+extern PRLock *_pr_deadQLock;
+extern PRUint32 _pr_numNativeDead;
+extern PRUint32 _pr_numUserDead;
+extern PRCList _pr_deadNativeQ;
+extern PRCList _pr_deadUserQ;
+#define _PR_DEADNATIVEQ _pr_deadNativeQ
+#define _PR_DEADUSERQ _pr_deadUserQ
+#define _PR_DEADQ_LOCK PR_Lock(_pr_deadQLock);
+#define _PR_DEADQ_UNLOCK PR_Unlock(_pr_deadQLock);
+#define _PR_INC_DEADNATIVE (_pr_numNativeDead++)
+#define _PR_DEC_DEADNATIVE (_pr_numNativeDead--)
+#define _PR_NUM_DEADNATIVE (_pr_numNativeDead)
+#define _PR_INC_DEADUSER (_pr_numUserDead++)
+#define _PR_DEC_DEADUSER (_pr_numUserDead--)
+#define _PR_NUM_DEADUSER (_pr_numUserDead)
+
+extern PRUint32 _pr_utid;
+
+extern struct _PRCPU *_pr_primordialCPU;
+
+extern PRLock *_pr_activeLock; /* lock for userActive and systemActive */
+extern PRInt32 _pr_userActive; /* number of active user threads */
+extern PRInt32 _pr_systemActive; /* number of active system threads */
+extern PRInt32 _pr_primordialExitCount; /* number of user threads left
+ * before the primordial thread
+ * can exit. */
+extern PRCondVar *_pr_primordialExitCVar; /* the condition variable for
+ * notifying the primordial thread
+ * when all other user threads
+ * have terminated. */
+
+extern PRUintn _pr_maxPTDs;
+
+extern PRLock *_pr_terminationCVLock;
+
+/*************************************************************************
+* Internal routines either called by PR itself or from machine-dependent *
+* code. *
+*************************************************************************/
+
+extern void _PR_ClockInterrupt(void);
+
+extern void _PR_Schedule(void);
+extern void _PR_SetThreadPriority(
+ PRThread* thread, PRThreadPriority priority);
+
+/***********************************************************************
+** FUNCTION: _PR_NewSegment()
+** DESCRIPTION:
+** Allocate a memory segment. The "size" value is rounded up to the
+** native system page size and a page aligned portion of memory is
+** returned. This memory is not part of the malloc heap. If "vaddr" is
+** not NULL then PR tries to allocate the segment at the desired virtual
+** address.
+** INPUTS: size: size of the desired memory segment
+** vaddr: address at which the newly aquired segment is to be
+** mapped into memory.
+** OUTPUTS: a memory segment is allocated, a PRSegment is allocated
+** RETURN: pointer to PRSegment
+***********************************************************************/
+extern PRSegment* _PR_NewSegment(PRUint32 size, void *vaddr);
+
+/***********************************************************************
+** FUNCTION: _PR_DestroySegment()
+** DESCRIPTION:
+** The memory segment and the PRSegment are freed
+** INPUTS: seg: pointer to PRSegment to be freed
+** OUTPUTS: the the PRSegment and its associated memory segment are freed
+** RETURN: void
+***********************************************************************/
+extern void _PR_DestroySegment(PRSegment *seg);
+
+extern PRThreadStack * _PR_NewStack(PRUint32 stackSize);
+extern void _PR_FreeStack(PRThreadStack *stack);
+extern PRBool _PR_NotifyThread (PRThread *thread, PRThread *me);
+extern void _PR_NotifyLockedThread (PRThread *thread);
+
+NSPR_API(void) _PR_AddSleepQ(PRThread *thread, PRIntervalTime timeout);
+NSPR_API(void) _PR_DelSleepQ(PRThread *thread, PRBool propogate_time);
+
+extern void _PR_AddThreadToRunQ(PRThread *me, PRThread *thread);
+
+NSPR_API(PRThread*) _PR_CreateThread(PRThreadType type,
+ void (*start)(void *arg),
+ void *arg,
+ PRThreadPriority priority,
+ PRThreadScope scope,
+ PRThreadState state,
+ PRUint32 stackSize,
+ PRUint32 flags);
+
+extern void _PR_NativeDestroyThread(PRThread *thread);
+extern void _PR_UserDestroyThread(PRThread *thread);
+
+extern PRThread* _PRI_AttachThread(
+ PRThreadType type, PRThreadPriority priority,
+ PRThreadStack *stack, PRUint32 flags);
+
+extern void _PRI_DetachThread(void);
+
+
+#define _PR_IO_PENDING(_thread) ((_thread)->io_pending)
+
+NSPR_API(void) _PR_MD_INIT_CPUS();
+#define _PR_MD_INIT_CPUS _MD_INIT_CPUS
+
+NSPR_API(void) _PR_MD_WAKEUP_CPUS();
+#define _PR_MD_WAKEUP_CPUS _MD_WAKEUP_CPUS
+
+/* Interrupts related */
+
+NSPR_API(void) _PR_MD_START_INTERRUPTS(void);
+#define _PR_MD_START_INTERRUPTS _MD_START_INTERRUPTS
+
+NSPR_API(void) _PR_MD_STOP_INTERRUPTS(void);
+#define _PR_MD_STOP_INTERRUPTS _MD_STOP_INTERRUPTS
+
+NSPR_API(void) _PR_MD_ENABLE_CLOCK_INTERRUPTS(void);
+#define _PR_MD_ENABLE_CLOCK_INTERRUPTS _MD_ENABLE_CLOCK_INTERRUPTS
+
+NSPR_API(void) _PR_MD_DISABLE_CLOCK_INTERRUPTS(void);
+#define _PR_MD_DISABLE_CLOCK_INTERRUPTS _MD_DISABLE_CLOCK_INTERRUPTS
+
+NSPR_API(void) _PR_MD_BLOCK_CLOCK_INTERRUPTS(void);
+#define _PR_MD_BLOCK_CLOCK_INTERRUPTS _MD_BLOCK_CLOCK_INTERRUPTS
+
+NSPR_API(void) _PR_MD_UNBLOCK_CLOCK_INTERRUPTS(void);
+#define _PR_MD_UNBLOCK_CLOCK_INTERRUPTS _MD_UNBLOCK_CLOCK_INTERRUPTS
+
+/* The _PR_MD_WAIT_LOCK and _PR_MD_WAKEUP_WAITER functions put to sleep and
+ * awaken a thread which is waiting on a lock or cvar.
+ */
+extern PRStatus _PR_MD_WAIT(PRThread *, PRIntervalTime timeout);
+#define _PR_MD_WAIT _MD_WAIT
+
+extern PRStatus _PR_MD_WAKEUP_WAITER(PRThread *);
+#define _PR_MD_WAKEUP_WAITER _MD_WAKEUP_WAITER
+
+#ifndef _PR_LOCAL_THREADS_ONLY /* not if only local threads supported */
+NSPR_API(void) _PR_MD_CLOCK_INTERRUPT(void);
+#define _PR_MD_CLOCK_INTERRUPT _MD_CLOCK_INTERRUPT
+#endif
+
+/* Stack debugging */
+NSPR_API(void) _PR_MD_INIT_STACK(PRThreadStack *ts, PRIntn redzone);
+#define _PR_MD_INIT_STACK _MD_INIT_STACK
+
+NSPR_API(void) _PR_MD_CLEAR_STACK(PRThreadStack* ts);
+#define _PR_MD_CLEAR_STACK _MD_CLEAR_STACK
+
+/* CPU related */
+NSPR_API(PRInt32) _PR_MD_GET_INTSOFF(void);
+#define _PR_MD_GET_INTSOFF _MD_GET_INTSOFF
+
+NSPR_API(void) _PR_MD_SET_INTSOFF(PRInt32 _val);
+#define _PR_MD_SET_INTSOFF _MD_SET_INTSOFF
+
+NSPR_API(_PRCPU*) _PR_MD_CURRENT_CPU(void);
+#define _PR_MD_CURRENT_CPU _MD_CURRENT_CPU
+
+NSPR_API(void) _PR_MD_SET_CURRENT_CPU(_PRCPU *cpu);
+#define _PR_MD_SET_CURRENT_CPU _MD_SET_CURRENT_CPU
+
+NSPR_API(void) _PR_MD_INIT_RUNNING_CPU(_PRCPU *cpu);
+#define _PR_MD_INIT_RUNNING_CPU _MD_INIT_RUNNING_CPU
+
+/*
+ * Returns the number of threads awoken or 0 if a timeout occurred;
+ */
+extern PRInt32 _PR_MD_PAUSE_CPU(PRIntervalTime timeout);
+#define _PR_MD_PAUSE_CPU _MD_PAUSE_CPU
+
+extern void _PR_MD_CLEANUP_BEFORE_EXIT(void);
+#define _PR_MD_CLEANUP_BEFORE_EXIT _MD_CLEANUP_BEFORE_EXIT
+
+extern void _PR_MD_EXIT(PRIntn status);
+#define _PR_MD_EXIT _MD_EXIT
+
+/* Locks related */
+
+NSPR_API(void) _PR_MD_INIT_LOCKS(void);
+#define _PR_MD_INIT_LOCKS _MD_INIT_LOCKS
+
+NSPR_API(PRStatus) _PR_MD_NEW_LOCK(_MDLock *md);
+#define _PR_MD_NEW_LOCK _MD_NEW_LOCK
+
+NSPR_API(void) _PR_MD_FREE_LOCK(_MDLock *md);
+#define _PR_MD_FREE_LOCK _MD_FREE_LOCK
+
+NSPR_API(void) _PR_MD_LOCK(_MDLock *md);
+#define _PR_MD_LOCK _MD_LOCK
+
+/* Return 0 on success, a nonzero value on failure. */
+NSPR_API(PRIntn) _PR_MD_TEST_AND_LOCK(_MDLock *md);
+#define _PR_MD_TEST_AND_LOCK _MD_TEST_AND_LOCK
+
+NSPR_API(void) _PR_MD_UNLOCK(_MDLock *md);
+#define _PR_MD_UNLOCK _MD_UNLOCK
+
+NSPR_API(void) _PR_MD_IOQ_LOCK(void);
+#define _PR_MD_IOQ_LOCK _MD_IOQ_LOCK
+
+NSPR_API(void) _PR_MD_IOQ_UNLOCK(void);
+#define _PR_MD_IOQ_UNLOCK _MD_IOQ_UNLOCK
+
+#ifndef _PR_LOCAL_THREADS_ONLY /* not if only local threads supported */
+/* Semaphore related -- only for native threads */
+#ifdef HAVE_CVAR_BUILT_ON_SEM
+NSPR_API(void) _PR_MD_NEW_SEM(_MDSemaphore *md, PRUintn value);
+#define _PR_MD_NEW_SEM _MD_NEW_SEM
+
+NSPR_API(void) _PR_MD_DESTROY_SEM(_MDSemaphore *md);
+#define _PR_MD_DESTROY_SEM _MD_DESTROY_SEM
+
+NSPR_API(PRStatus) _PR_MD_TIMED_WAIT_SEM(
+ _MDSemaphore *md, PRIntervalTime timeout);
+#define _PR_MD_TIMED_WAIT_SEM _MD_TIMED_WAIT_SEM
+
+NSPR_API(PRStatus) _PR_MD_WAIT_SEM(_MDSemaphore *md);
+#define _PR_MD_WAIT_SEM _MD_WAIT_SEM
+
+NSPR_API(void) _PR_MD_POST_SEM(_MDSemaphore *md);
+#define _PR_MD_POST_SEM _MD_POST_SEM
+#endif /* HAVE_CVAR_BUILT_ON_SEM */
+
+#endif
+
+/* Condition Variables related -- only for native threads */
+
+#ifndef _PR_LOCAL_THREADS_ONLY /* not if only local threads supported */
+NSPR_API(PRInt32) _PR_MD_NEW_CV(_MDCVar *md);
+#define _PR_MD_NEW_CV _MD_NEW_CV
+
+NSPR_API(void) _PR_MD_FREE_CV(_MDCVar *md);
+#define _PR_MD_FREE_CV _MD_FREE_CV
+
+NSPR_API(void) _PR_MD_WAIT_CV(
+ _MDCVar *mdCVar,_MDLock *mdLock,PRIntervalTime timeout);
+#define _PR_MD_WAIT_CV _MD_WAIT_CV
+
+NSPR_API(void) _PR_MD_NOTIFY_CV(_MDCVar *md, _MDLock *lock);
+#define _PR_MD_NOTIFY_CV _MD_NOTIFY_CV
+
+NSPR_API(void) _PR_MD_NOTIFYALL_CV(_MDCVar *md, _MDLock *lock);
+#define _PR_MD_NOTIFYALL_CV _MD_NOTIFYALL_CV
+#endif /* _PR_LOCAL_THREADS_ONLY */
+
+/* Threads related */
+NSPR_API(PRThread*) _PR_MD_CURRENT_THREAD(void);
+#define _PR_MD_CURRENT_THREAD _MD_CURRENT_THREAD
+
+NSPR_API(PRThread*) _PR_MD_GET_ATTACHED_THREAD(void);
+#define _PR_MD_GET_ATTACHED_THREAD _MD_GET_ATTACHED_THREAD
+
+NSPR_API(PRThread*) _PR_MD_LAST_THREAD(void);
+#define _PR_MD_LAST_THREAD _MD_LAST_THREAD
+
+NSPR_API(void) _PR_MD_SET_CURRENT_THREAD(PRThread *thread);
+#define _PR_MD_SET_CURRENT_THREAD _MD_SET_CURRENT_THREAD
+
+NSPR_API(void) _PR_MD_SET_LAST_THREAD(PRThread *thread);
+#define _PR_MD_SET_LAST_THREAD _MD_SET_LAST_THREAD
+
+extern PRStatus _PR_MD_INIT_THREAD(PRThread *thread);
+#define _PR_MD_INIT_THREAD _MD_INIT_THREAD
+
+extern void _PR_MD_EXIT_THREAD(PRThread *thread);
+#define _PR_MD_EXIT_THREAD _MD_EXIT_THREAD
+
+#ifndef _PR_LOCAL_THREADS_ONLY /* not if only local threads supported */
+
+NSPR_API(PRStatus) _PR_MD_INIT_ATTACHED_THREAD(PRThread *thread);
+#define _PR_MD_INIT_ATTACHED_THREAD _MD_INIT_ATTACHED_THREAD
+
+extern void _PR_MD_SUSPEND_THREAD(PRThread *thread);
+#define _PR_MD_SUSPEND_THREAD _MD_SUSPEND_THREAD
+
+extern void _PR_MD_RESUME_THREAD(PRThread *thread);
+#define _PR_MD_RESUME_THREAD _MD_RESUME_THREAD
+
+extern void _PR_MD_SUSPEND_CPU(_PRCPU *cpu);
+#define _PR_MD_SUSPEND_CPU _MD_SUSPEND_CPU
+
+extern void _PR_MD_RESUME_CPU(_PRCPU *cpu);
+#define _PR_MD_RESUME_CPU _MD_RESUME_CPU
+
+extern void _PR_MD_BEGIN_SUSPEND_ALL(void);
+#define _PR_MD_BEGIN_SUSPEND_ALL _MD_BEGIN_SUSPEND_ALL
+
+extern void _PR_MD_END_SUSPEND_ALL(void);
+#define _PR_MD_END_SUSPEND_ALL _MD_END_SUSPEND_ALL
+
+extern void _PR_MD_BEGIN_RESUME_ALL(void);
+#define _PR_MD_BEGIN_RESUME_ALL _MD_BEGIN_RESUME_ALL
+
+extern void _PR_MD_END_RESUME_ALL(void);
+#define _PR_MD_END_RESUME_ALL _MD_END_RESUME_ALL
+
+#if defined(IRIX)
+NSPR_API(void) _PR_IRIX_CHILD_PROCESS(void);
+#endif /* IRIX */
+
+#endif /* !_PR_LOCAL_THREADS_ONLY */
+
+extern void _PR_MD_CLEAN_THREAD(PRThread *thread);
+#define _PR_MD_CLEAN_THREAD _MD_CLEAN_THREAD
+
+#ifdef HAVE_CUSTOM_USER_THREADS
+extern void _PR_MD_CREATE_PRIMORDIAL_USER_THREAD(PRThread *);
+#define _PR_MD_CREATE_PRIMORDIAL_USER_THREAD _MD_CREATE_PRIMORDIAL_USER_THREAD
+
+extern PRThread* _PR_MD_CREATE_USER_THREAD(
+ PRUint32 stacksize,
+ void (*start)(void *),
+ void *arg);
+#define _PR_MD_CREATE_USER_THREAD _MD_CREATE_USER_THREAD
+#endif
+
+extern PRStatus _PR_MD_CREATE_THREAD(
+ PRThread *thread,
+ void (*start) (void *),
+ PRThreadPriority priority,
+ PRThreadScope scope,
+ PRThreadState state,
+ PRUint32 stackSize);
+#define _PR_MD_CREATE_THREAD _MD_CREATE_THREAD
+
+extern void _PR_MD_JOIN_THREAD(_MDThread *md);
+#define _PR_MD_JOIN_THREAD _MD_JOIN_THREAD
+
+extern void _PR_MD_END_THREAD(void);
+#define _PR_MD_END_THREAD _MD_END_THREAD
+
+extern void _PR_MD_YIELD(void);
+#define _PR_MD_YIELD _MD_YIELD
+
+extern void _PR_MD_SET_PRIORITY(_MDThread *md, PRThreadPriority newPri);
+#define _PR_MD_SET_PRIORITY _MD_SET_PRIORITY
+
+NSPR_API(void) _PR_MD_SUSPENDALL(void);
+#define _PR_MD_SUSPENDALL _MD_SUSPENDALL
+
+NSPR_API(void) _PR_MD_RESUMEALL(void);
+#define _PR_MD_RESUMEALL _MD_RESUMEALL
+
+extern void _PR_MD_INIT_CONTEXT(
+ PRThread *thread, char *top, void (*start) (void), PRBool *status);
+#define _PR_MD_INIT_CONTEXT _MD_INIT_CONTEXT
+
+extern void _PR_MD_SWITCH_CONTEXT(PRThread *thread);
+#define _PR_MD_SWITCH_CONTEXT _MD_SWITCH_CONTEXT
+
+extern void _PR_MD_RESTORE_CONTEXT(PRThread *thread);
+#define _PR_MD_RESTORE_CONTEXT _MD_RESTORE_CONTEXT
+
+/* Segment related */
+extern void _PR_MD_INIT_SEGS(void);
+#define _PR_MD_INIT_SEGS _MD_INIT_SEGS
+
+extern PRStatus _PR_MD_ALLOC_SEGMENT(PRSegment *seg, PRUint32 size, void *vaddr);
+#define _PR_MD_ALLOC_SEGMENT _MD_ALLOC_SEGMENT
+
+extern void _PR_MD_FREE_SEGMENT(PRSegment *seg);
+#define _PR_MD_FREE_SEGMENT _MD_FREE_SEGMENT
+
+/* Directory enumeration related */
+extern PRStatus _PR_MD_OPEN_DIR(_MDDir *md,const char *name);
+#define _PR_MD_OPEN_DIR _MD_OPEN_DIR
+
+extern char * _PR_MD_READ_DIR(_MDDir *md, PRIntn flags);
+#define _PR_MD_READ_DIR _MD_READ_DIR
+
+extern PRInt32 _PR_MD_CLOSE_DIR(_MDDir *md);
+#define _PR_MD_CLOSE_DIR _MD_CLOSE_DIR
+
+/* Named semaphores related */
+extern PRSem * _PR_MD_OPEN_SEMAPHORE(
+ const char *osname, PRIntn flags, PRIntn mode, PRUintn value);
+#define _PR_MD_OPEN_SEMAPHORE _MD_OPEN_SEMAPHORE
+
+extern PRStatus _PR_MD_WAIT_SEMAPHORE(PRSem *sem);
+#define _PR_MD_WAIT_SEMAPHORE _MD_WAIT_SEMAPHORE
+
+extern PRStatus _PR_MD_POST_SEMAPHORE(PRSem *sem);
+#define _PR_MD_POST_SEMAPHORE _MD_POST_SEMAPHORE
+
+extern PRStatus _PR_MD_CLOSE_SEMAPHORE(PRSem *sem);
+#define _PR_MD_CLOSE_SEMAPHORE _MD_CLOSE_SEMAPHORE
+
+extern PRStatus _PR_MD_DELETE_SEMAPHORE(const char *osname);
+#define _PR_MD_DELETE_SEMAPHORE _MD_DELETE_SEMAPHORE
+
+/* I/O related */
+extern void _PR_MD_INIT_FILEDESC(PRFileDesc *fd);
+#define _PR_MD_INIT_FILEDESC _MD_INIT_FILEDESC
+
+extern void _PR_MD_MAKE_NONBLOCK(PRFileDesc *fd);
+#define _PR_MD_MAKE_NONBLOCK _MD_MAKE_NONBLOCK
+
+/* File I/O related */
+extern PROsfd _PR_MD_OPEN(const char *name, PRIntn osflags, PRIntn mode);
+#define _PR_MD_OPEN _MD_OPEN
+
+extern PROsfd _PR_MD_OPEN_FILE(const char *name, PRIntn osflags, PRIntn mode);
+#define _PR_MD_OPEN_FILE _MD_OPEN_FILE
+
+extern PRInt32 _PR_MD_CLOSE_FILE(PROsfd osfd);
+#define _PR_MD_CLOSE_FILE _MD_CLOSE_FILE
+
+extern PRInt32 _PR_MD_READ(PRFileDesc *fd, void *buf, PRInt32 amount);
+#define _PR_MD_READ _MD_READ
+
+extern PRInt32 _PR_MD_WRITE(PRFileDesc *fd, const void *buf, PRInt32 amount);
+#define _PR_MD_WRITE _MD_WRITE
+
+extern PRInt32 _PR_MD_WRITEV(
+ PRFileDesc *fd, const struct PRIOVec *iov,
+ PRInt32 iov_size, PRIntervalTime timeout);
+#define _PR_MD_WRITEV _MD_WRITEV
+
+extern PRInt32 _PR_MD_FSYNC(PRFileDesc *fd);
+#define _PR_MD_FSYNC _MD_FSYNC
+
+extern PRInt32 _PR_MD_DELETE(const char *name);
+#define _PR_MD_DELETE _MD_DELETE
+
+extern PRInt32 _PR_MD_RENAME(const char *from, const char *to);
+#define _PR_MD_RENAME _MD_RENAME
+
+extern PRInt32 _PR_MD_ACCESS(const char *name, PRAccessHow how);
+#define _PR_MD_ACCESS _MD_ACCESS
+
+extern PRInt32 _PR_MD_STAT(const char *name, struct stat *buf);
+#define _PR_MD_STAT _MD_STAT
+
+extern PRInt32 _PR_MD_MKDIR(const char *name, PRIntn mode);
+#define _PR_MD_MKDIR _MD_MKDIR
+
+extern PRInt32 _PR_MD_MAKE_DIR(const char *name, PRIntn mode);
+#define _PR_MD_MAKE_DIR _MD_MAKE_DIR
+
+extern PRInt32 _PR_MD_RMDIR(const char *name);
+#define _PR_MD_RMDIR _MD_RMDIR
+
+#ifdef MOZ_UNICODE
+/* UTF16 File I/O related */
+extern PRStatus _PR_MD_OPEN_DIR_UTF16(_MDDirUTF16 *md, const PRUnichar *name);
+#define _PR_MD_OPEN_DIR_UTF16 _MD_OPEN_DIR_UTF16
+
+extern PROsfd _PR_MD_OPEN_FILE_UTF16(const PRUnichar *name, PRIntn osflags, PRIntn mode);
+#define _PR_MD_OPEN_FILE_UTF16 _MD_OPEN_FILE_UTF16
+
+extern PRUnichar * _PR_MD_READ_DIR_UTF16(_MDDirUTF16 *md, PRIntn flags);
+#define _PR_MD_READ_DIR_UTF16 _MD_READ_DIR_UTF16
+
+extern PRInt32 _PR_MD_CLOSE_DIR_UTF16(_MDDirUTF16 *md);
+#define _PR_MD_CLOSE_DIR_UTF16 _MD_CLOSE_DIR_UTF16
+
+extern PRInt32 _PR_MD_GETFILEINFO64_UTF16(const PRUnichar *fn, PRFileInfo64 *info);
+#define _PR_MD_GETFILEINFO64_UTF16 _MD_GETFILEINFO64_UTF16
+#endif /* MOZ_UNICODE */
+
+/* Socket I/O related */
+extern void _PR_MD_INIT_IO(void);
+#define _PR_MD_INIT_IO _MD_INIT_IO
+
+extern PRInt32 _PR_MD_CLOSE_SOCKET(PROsfd osfd);
+#define _PR_MD_CLOSE_SOCKET _MD_CLOSE_SOCKET
+
+extern PRInt32 _PR_MD_CONNECT(
+ PRFileDesc *fd, const PRNetAddr *addr,
+ PRUint32 addrlen, PRIntervalTime timeout);
+#define _PR_MD_CONNECT _MD_CONNECT
+
+extern PROsfd _PR_MD_ACCEPT(
+ PRFileDesc *fd, PRNetAddr *addr,
+ PRUint32 *addrlen, PRIntervalTime timeout);
+#define _PR_MD_ACCEPT _MD_ACCEPT
+
+extern PRInt32 _PR_MD_BIND(PRFileDesc *fd, const PRNetAddr *addr, PRUint32 addrlen);
+#define _PR_MD_BIND _MD_BIND
+
+extern PRInt32 _PR_MD_LISTEN(PRFileDesc *fd, PRIntn backlog);
+#define _PR_MD_LISTEN _MD_LISTEN
+
+extern PRInt32 _PR_MD_SHUTDOWN(PRFileDesc *fd, PRIntn how);
+#define _PR_MD_SHUTDOWN _MD_SHUTDOWN
+
+extern PRInt32 _PR_MD_RECV(PRFileDesc *fd, void *buf, PRInt32 amount,
+ PRIntn flags, PRIntervalTime timeout);
+#define _PR_MD_RECV _MD_RECV
+
+extern PRInt32 _PR_MD_SEND(
+ PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags,
+ PRIntervalTime timeout);
+#define _PR_MD_SEND _MD_SEND
+
+extern PRInt32 _PR_MD_ACCEPT_READ(PRFileDesc *sd, PROsfd *newSock,
+ PRNetAddr **raddr, void *buf, PRInt32 amount,
+ PRIntervalTime timeout);
+#define _PR_MD_ACCEPT_READ _MD_ACCEPT_READ
+
+#ifdef WIN32
+extern PROsfd _PR_MD_FAST_ACCEPT(PRFileDesc *fd, PRNetAddr *addr,
+ PRUint32 *addrlen, PRIntervalTime timeout,
+ PRBool fast,
+ _PR_AcceptTimeoutCallback callback,
+ void *callbackArg);
+
+extern PRInt32 _PR_MD_FAST_ACCEPT_READ(PRFileDesc *sd, PROsfd *newSock,
+ PRNetAddr **raddr, void *buf, PRInt32 amount,
+ PRIntervalTime timeout, PRBool fast,
+ _PR_AcceptTimeoutCallback callback,
+ void *callbackArg);
+
+extern void _PR_MD_UPDATE_ACCEPT_CONTEXT(PROsfd s, PROsfd ls);
+#define _PR_MD_UPDATE_ACCEPT_CONTEXT _MD_UPDATE_ACCEPT_CONTEXT
+/*
+ * The NSPR epoch (00:00:00 1 Jan 1970 UTC) in FILETIME.
+ * We store the value in a PRTime variable for convenience.
+ * This constant is used by _PR_FileTimeToPRTime().
+ * This is defined in ntmisc.c
+ */
+extern const PRTime _pr_filetime_offset;
+#endif /* WIN32 */
+
+extern PRInt32 _PR_MD_SENDFILE(
+ PRFileDesc *sock, PRSendFileData *sfd,
+ PRInt32 flags, PRIntervalTime timeout);
+#define _PR_MD_SENDFILE _MD_SENDFILE
+
+extern PRStatus _PR_MD_GETSOCKNAME(
+ PRFileDesc *fd, PRNetAddr *addr, PRUint32 *addrlen);
+#define _PR_MD_GETSOCKNAME _MD_GETSOCKNAME
+
+extern PRStatus _PR_MD_GETPEERNAME(
+ PRFileDesc *fd, PRNetAddr *addr, PRUint32 *addrlen);
+#define _PR_MD_GETPEERNAME _MD_GETPEERNAME
+
+extern PRStatus _PR_MD_GETSOCKOPT(
+ PRFileDesc *fd, PRInt32 level, PRInt32 optname, char* optval, PRInt32* optlen);
+#define _PR_MD_GETSOCKOPT _MD_GETSOCKOPT
+
+extern PRStatus _PR_MD_SETSOCKOPT(
+ PRFileDesc *fd, PRInt32 level, PRInt32 optname,
+ const char* optval, PRInt32 optlen);
+#define _PR_MD_SETSOCKOPT _MD_SETSOCKOPT
+
+extern PRStatus PR_CALLBACK _PR_SocketGetSocketOption(
+ PRFileDesc *fd, PRSocketOptionData *data);
+
+extern PRStatus PR_CALLBACK _PR_SocketSetSocketOption(
+ PRFileDesc *fd, const PRSocketOptionData *data);
+
+extern PRInt32 _PR_MD_RECVFROM(
+ PRFileDesc *fd, void *buf, PRInt32 amount, PRIntn flags,
+ PRNetAddr *addr, PRUint32 *addrlen, PRIntervalTime timeout);
+#define _PR_MD_RECVFROM _MD_RECVFROM
+
+extern PRInt32 _PR_MD_SENDTO(
+ PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags,
+ const PRNetAddr *addr, PRUint32 addrlen, PRIntervalTime timeout);
+#define _PR_MD_SENDTO _MD_SENDTO
+
+extern PRInt32 _PR_MD_SOCKETPAIR(int af, int type, int flags, PROsfd *osfd);
+#define _PR_MD_SOCKETPAIR _MD_SOCKETPAIR
+
+extern PROsfd _PR_MD_SOCKET(int af, int type, int flags);
+#define _PR_MD_SOCKET _MD_SOCKET
+
+extern PRInt32 _PR_MD_SOCKETAVAILABLE(PRFileDesc *fd);
+#define _PR_MD_SOCKETAVAILABLE _MD_SOCKETAVAILABLE
+
+extern PRInt32 _PR_MD_PIPEAVAILABLE(PRFileDesc *fd);
+#define _PR_MD_PIPEAVAILABLE _MD_PIPEAVAILABLE
+
+extern PRInt32 _PR_MD_PR_POLL(PRPollDesc *pds, PRIntn npds,
+ PRIntervalTime timeout);
+#define _PR_MD_PR_POLL _MD_PR_POLL
+
+/*
+ * Initialize fd->secret->inheritable for a newly created fd.
+ * If 'imported' is false, the osfd (i.e., fd->secret->md.osfd)
+ * was created by NSPR and hence has the OS-dependent default
+ * inheritable attribute. If 'imported' is true, the osfd was
+ * not created by NSPR and hence a system call is required to
+ * query its inheritable attribute. Since we may never need to
+ * know the inheritable attribute of a fd, a platform may choose
+ * to initialize fd->secret->inheritable of an imported fd to
+ * _PR_TRI_UNKNOWN and only pay the cost of the system call
+ * (in _PR_MD_QUERY_FD_INHERITABLE) when necessary.
+ */
+extern void _PR_MD_INIT_FD_INHERITABLE(PRFileDesc *fd, PRBool imported);
+#define _PR_MD_INIT_FD_INHERITABLE _MD_INIT_FD_INHERITABLE
+
+extern PRStatus _PR_MD_SET_FD_INHERITABLE(PRFileDesc *fd, PRBool inheritable);
+#define _PR_MD_SET_FD_INHERITABLE _MD_SET_FD_INHERITABLE
+
+
+#define _PR_PROCESS_TIMEOUT_INTERRUPT_ERRORS(me) \
+ if (_PR_PENDING_INTERRUPT(me)) { \
+ me->flags &= ~_PR_INTERRUPT; \
+ PR_SetError( PR_PENDING_INTERRUPT_ERROR, 0); \
+ } else { \
+ PR_SetError(PR_IO_TIMEOUT_ERROR, 0); \
+ }
+
+extern void *_PR_MD_GET_SP(PRThread *thread);
+#define _PR_MD_GET_SP _MD_GET_SP
+
+#endif /* defined(_PR_PTHREADS) */
+
+/************************************************************************/
+/*************************************************************************
+** The remainder of the definitions are shared by pthreads and the classic
+** NSPR code. These too may be conditionalized.
+*************************************************************************/
+/************************************************************************/
+
+extern PROffset32 _PR_MD_LSEEK(PRFileDesc *fd, PROffset32 offset, PRSeekWhence whence);
+#define _PR_MD_LSEEK _MD_LSEEK
+
+extern PROffset64 _PR_MD_LSEEK64(PRFileDesc *fd, PROffset64 offset, PRSeekWhence whence);
+#define _PR_MD_LSEEK64 _MD_LSEEK64
+
+extern PRInt32 _PR_MD_GETFILEINFO(const char *fn, PRFileInfo *info);
+#define _PR_MD_GETFILEINFO _MD_GETFILEINFO
+
+extern PRInt32 _PR_MD_GETFILEINFO64(const char *fn, PRFileInfo64 *info);
+#define _PR_MD_GETFILEINFO64 _MD_GETFILEINFO64
+
+extern PRInt32 _PR_MD_GETOPENFILEINFO(const PRFileDesc *fd, PRFileInfo *info);
+#define _PR_MD_GETOPENFILEINFO _MD_GETOPENFILEINFO
+
+extern PRInt32 _PR_MD_GETOPENFILEINFO64(const PRFileDesc *fd, PRFileInfo64 *info);
+#define _PR_MD_GETOPENFILEINFO64 _MD_GETOPENFILEINFO64
+
+
+/*****************************************************************************/
+/************************** File descriptor caching **************************/
+/*****************************************************************************/
+extern void _PR_InitFdCache(void);
+extern void _PR_CleanupFdCache(void);
+extern PRFileDesc *_PR_Getfd(void);
+extern void _PR_Putfd(PRFileDesc *fd);
+
+/*
+ * These flags are used by NSPR temporarily in the poll
+ * descriptor's out_flags field to record the mapping of
+ * NSPR's poll flags to the system poll flags.
+ *
+ * If _PR_POLL_READ_SYS_WRITE bit is set, it means the
+ * PR_POLL_READ flag specified by the topmost layer is
+ * mapped to the WRITE flag at the system layer. Similarly
+ * for the other three _PR_POLL_XXX_SYS_YYY flags. It is
+ * assumed that the PR_POLL_EXCEPT flag doesn't get mapped
+ * to other flags.
+ */
+#define _PR_POLL_READ_SYS_READ 0x1
+#define _PR_POLL_READ_SYS_WRITE 0x2
+#define _PR_POLL_WRITE_SYS_READ 0x4
+#define _PR_POLL_WRITE_SYS_WRITE 0x8
+
+/*
+** These methods are coerced into file descriptor methods table
+** when the intended service is inappropriate for the particular
+** type of file descriptor.
+*/
+extern PRIntn _PR_InvalidInt(void);
+extern PRInt16 _PR_InvalidInt16(void);
+extern PRInt64 _PR_InvalidInt64(void);
+extern PRStatus _PR_InvalidStatus(void);
+extern PRFileDesc *_PR_InvalidDesc(void);
+
+extern PRIOMethods _pr_faulty_methods;
+
+/*
+** The PR_NETADDR_SIZE macro can only be called on a PRNetAddr union
+** whose 'family' field is set. It returns the size of the union
+** member corresponding to the specified address family.
+*/
+
+extern PRUintn _PR_NetAddrSize(const PRNetAddr* addr);
+
+#if defined(_PR_INET6)
+
+#define PR_NETADDR_SIZE(_addr) _PR_NetAddrSize(_addr)
+
+#elif defined(_PR_HAVE_MD_SOCKADDR_IN6)
+
+/*
+** Under the following conditions:
+** 1. _PR_INET6 is not defined;
+** 2. _PR_INET6_PROBE is defined;
+** 3. struct sockaddr_in6 has nonstandard fields at the end
+** (e.g., on Solaris 8),
+** (_addr)->ipv6 is smaller than struct sockaddr_in6, and
+** hence we can't pass sizeof((_addr)->ipv6) to socket
+** functions such as connect because they would fail with
+** EINVAL.
+**
+** To pass the correct socket address length to socket
+** functions, define the macro _PR_HAVE_MD_SOCKADDR_IN6 and
+** define struct _md_sockaddr_in6 to be isomorphic to
+** struct sockaddr_in6.
+*/
+
+#if defined(XP_UNIX) || defined(XP_OS2)
+#define PR_NETADDR_SIZE(_addr) \
+ ((_addr)->raw.family == PR_AF_INET \
+ ? sizeof((_addr)->inet) \
+ : ((_addr)->raw.family == PR_AF_INET6 \
+ ? sizeof(struct _md_sockaddr_in6) \
+ : sizeof((_addr)->local)))
+#else
+#define PR_NETADDR_SIZE(_addr) \
+ ((_addr)->raw.family == PR_AF_INET \
+ ? sizeof((_addr)->inet) \
+ : sizeof(struct _md_sockaddr_in6))
+#endif /* defined(XP_UNIX) */
+
+#else
+
+#if defined(XP_UNIX) || defined(XP_OS2)
+#define PR_NETADDR_SIZE(_addr) \
+ ((_addr)->raw.family == PR_AF_INET \
+ ? sizeof((_addr)->inet) \
+ : ((_addr)->raw.family == PR_AF_INET6 \
+ ? sizeof((_addr)->ipv6) \
+ : sizeof((_addr)->local)))
+#else
+#define PR_NETADDR_SIZE(_addr) \
+ ((_addr)->raw.family == PR_AF_INET \
+ ? sizeof((_addr)->inet) \
+ : sizeof((_addr)->ipv6))
+#endif /* defined(XP_UNIX) */
+
+#endif /* defined(_PR_INET6) */
+
+extern PRStatus _PR_MapOptionName(
+ PRSockOption optname, PRInt32 *level, PRInt32 *name);
+extern void _PR_InitThreads(
+ PRThreadType type, PRThreadPriority priority, PRUintn maxPTDs);
+
+struct PRLock {
+#if defined(_PR_PTHREADS)
+ pthread_mutex_t mutex; /* the underlying lock */
+ _PT_Notified notified; /* array of conditions notified */
+ PRBool locked; /* whether the mutex is locked */
+ pthread_t owner; /* if locked, current lock owner */
+#elif defined(_PR_BTHREADS)
+ sem_id semaphoreID; /* the underlying lock */
+ int32 benaphoreCount; /* number of people in lock */
+ thread_id owner; /* current lock owner */
+#else /* not pthreads or Be threads */
+ PRCList links; /* linkage for PRThread.lockList */
+ struct PRThread *owner; /* current lock owner */
+ PRCList waitQ; /* list of threads waiting for lock */
+ PRThreadPriority priority; /* priority of lock */
+ PRThreadPriority boostPriority; /* boosted priority of lock owner */
+ _MDLock ilock; /* Internal Lock to protect user-level fields */
+#endif
+};
+
+extern void _PR_InitLocks(void);
+
+struct PRCondVar {
+ PRLock *lock; /* associated lock that protects the condition */
+#if defined(_PR_PTHREADS)
+ pthread_cond_t cv; /* underlying pthreads condition */
+ PRInt32 notify_pending; /* CV has destroy pending notification */
+#elif defined(_PR_BTHREADS)
+ sem_id sem; /* the underlying lock */
+ sem_id handshakeSem; /* the lock for 'notify'-threads waiting for confirmation */
+ sem_id signalSem; /* the lock for threads waiting for someone to notify */
+ volatile int32 nw; /* the number waiting */
+ volatile int32 ns; /* the number signalling */
+ long signalBenCount; /* the number waiting on the underlying sem */
+#else /* not pthreads or Be threads */
+ PRCList condQ; /* Condition variable wait Q */
+ _MDLock ilock; /* Internal Lock to protect condQ */
+ _MDCVar md;
+#endif
+};
+
+/************************************************************************/
+
+struct PRMonitor {
+ const char* name; /* monitor name for debugging */
+#if defined(_PR_PTHREADS)
+ PRLock lock; /* the lock structure */
+ pthread_t owner; /* the owner of the lock or invalid */
+ PRCondVar *cvar; /* condition variable queue */
+#else /* defined(_PR_PTHREADS) */
+ PRCondVar *cvar; /* associated lock and condition variable queue */
+#endif /* defined(_PR_PTHREADS) */
+ PRUint32 entryCount; /* # of times re-entered */
+};
+
+/************************************************************************/
+
+struct PRSemaphore {
+#if defined(_PR_BTHREADS)
+ sem_id sem;
+ int32 benaphoreCount;
+#else
+ PRCondVar *cvar; /* associated lock and condition variable queue */
+ PRUintn count; /* the value of the counting semaphore */
+ PRUint32 waiters; /* threads waiting on the semaphore */
+#if defined(_PR_PTHREADS)
+#else /* defined(_PR_PTHREADS) */
+ _MDSemaphore md;
+#endif /* defined(_PR_PTHREADS) */
+#endif /* defined(_PR_BTHREADS) */
+};
+
+NSPR_API(void) _PR_InitSem(void);
+
+/*************************************************************************/
+
+struct PRSem {
+#ifdef _PR_HAVE_POSIX_SEMAPHORES
+ sem_t *sem;
+#elif defined(_PR_HAVE_SYSV_SEMAPHORES)
+ int semid;
+#elif defined(WIN32)
+ HANDLE sem;
+#else
+ PRInt8 notused;
+#endif
+};
+
+/*************************************************************************/
+
+struct PRStackStr {
+ /* head MUST be at offset 0; assembly language code relies on this */
+#if defined(AIX)
+ volatile PRStackElem prstk_head;
+#else
+ PRStackElem prstk_head;
+#endif
+
+ PRLock *prstk_lock;
+ char *prstk_name;
+};
+
+/************************************************************************/
+
+/* XXX this needs to be exported (sigh) */
+struct PRThreadStack {
+ PRCList links;
+ PRUintn flags;
+
+ char *allocBase; /* base of stack's allocated memory */
+ PRUint32 allocSize; /* size of stack's allocated memory */
+ char *stackBottom; /* bottom of stack from C's point of view */
+ char *stackTop; /* top of stack from C's point of view */
+ PRUint32 stackSize; /* size of usable portion of the stack */
+
+ PRSegment *seg;
+ PRThread* thr; /* back pointer to thread owning this stack */
+
+#if defined(_PR_PTHREADS)
+#else /* defined(_PR_PTHREADS) */
+ _MDThreadStack md;
+#endif /* defined(_PR_PTHREADS) */
+};
+
+extern void _PR_DestroyThreadPrivate(PRThread*);
+
+typedef void (PR_CALLBACK *_PRStartFn)(void *);
+
+struct PRThread {
+ PRUint32 state; /* thread's creation state */
+ PRThreadPriority priority; /* apparent priority, loosly defined */
+
+ void *arg; /* argument to the client's entry point */
+ _PRStartFn startFunc; /* the root of the client's thread */
+
+ PRThreadStack *stack; /* info about thread's stack (for GC) */
+ void *environment; /* pointer to execution environment */
+
+ PRThreadDumpProc dump; /* dump thread info out */
+ void *dumpArg; /* argument for the dump function */
+
+ /*
+ ** Per thread private data
+ */
+ PRUint32 tpdLength; /* thread's current vector length */
+ void **privateData; /* private data vector or NULL */
+ PRErrorCode errorCode; /* current NSPR error code | zero */
+ PRInt32 osErrorCode; /* mapping of errorCode | zero */
+ PRIntn errorStringLength; /* textLength from last call to PR_SetErrorText() */
+ PRInt32 errorStringSize; /* malloc()'d size of buffer | zero */
+ char *errorString; /* current error string | NULL */
+
+#if defined(_PR_PTHREADS)
+ pthread_t id; /* pthread identifier for the thread */
+ PRBool okToDelete; /* ok to delete the PRThread struct? */
+ PRCondVar *waiting; /* where the thread is waiting | NULL */
+ void *sp; /* recorded sp for garbage collection */
+ PRThread *next, *prev; /* simple linked list of all threads */
+ PRUint32 suspend; /* used to store suspend and resume flags */
+#ifdef PT_NO_SIGTIMEDWAIT
+ pthread_mutex_t suspendResumeMutex;
+ pthread_cond_t suspendResumeCV;
+#endif
+ PRUint32 interrupt_blocked; /* interrupt blocked */
+ struct pollfd *syspoll_list; /* Unix polling list used by PR_Poll */
+ PRUint32 syspoll_count; /* number of elements in syspoll_list */
+#if defined(_PR_POLL_WITH_SELECT)
+ int *selectfd_list; /* Unix fd's that PR_Poll selects on */
+ PRUint32 selectfd_count; /* number of elements in selectfd_list */
+#endif
+#elif defined(_PR_BTHREADS)
+ PRUint32 flags;
+ _MDThread md;
+ PRBool io_pending;
+ PRInt32 io_fd;
+ PRBool io_suspended;
+#else /* not pthreads or Be threads */
+ _MDLock threadLock; /* Lock to protect thread state variables.
+ * Protects the following fields:
+ * state
+ * priority
+ * links
+ * wait
+ * cpu
+ */
+ PRUint32 queueCount;
+ PRUint32 waitCount;
+
+ PRCList active; /* on list of all active threads */
+ PRCList links;
+ PRCList waitQLinks; /* when thread is PR_Wait'ing */
+ PRCList lockList; /* list of locks currently holding */
+ PRIntervalTime sleep; /* sleep time when thread is sleeping */
+ struct _wait {
+ struct PRLock *lock;
+ struct PRCondVar *cvar;
+ } wait;
+
+ PRUint32 id;
+ PRUint32 flags;
+ PRUint32 no_sched; /* Don't schedule the thread to run.
+ * This flag has relevance only when
+ * multiple NSPR CPUs are created.
+ * When a thread is de-scheduled, there
+ * is a narrow window of time in which
+ * the thread is put on the run queue
+ * but the scheduler is actually using
+ * the stack of this thread. It is safe
+ * to run this thread on a different CPU
+ * only when its stack is not in use on
+ * any other CPU. The no_sched flag is
+ * set during this interval to prevent
+ * the thread from being scheduled on a
+ * different CPU.
+ */
+
+ /* thread termination condition variable for join */
+ PRCondVar *term;
+
+ _PRCPU *cpu; /* cpu to which this thread is bound */
+ PRUint32 threadAllocatedOnStack;/* boolean */
+
+ /* When an async IO is in progress and a second async IO cannot be
+ * initiated, the io_pending flag is set to true. Some platforms will
+ * not use the io_pending flag. If the io_pending flag is true, then
+ * io_fd is the OS-file descriptor on which IO is pending.
+ */
+ PRBool io_pending;
+ PRInt32 io_fd;
+
+ /* If a timeout occurs or if an outstanding IO is interrupted and the
+ * OS doesn't support a real cancellation (NT or MAC), then the
+ * io_suspended flag will be set to true. The thread will be resumed
+ * but may run into trouble issuing additional IOs until the io_pending
+ * flag can be cleared
+ */
+ PRBool io_suspended;
+
+ _MDThread md;
+#endif
+};
+
+struct PRProcessAttr {
+ PRFileDesc *stdinFd;
+ PRFileDesc *stdoutFd;
+ PRFileDesc *stderrFd;
+ char *currentDirectory;
+ char *fdInheritBuffer;
+ PRSize fdInheritBufferSize;
+ PRSize fdInheritBufferUsed;
+};
+
+struct PRProcess {
+ _MDProcess md;
+};
+
+struct PRFileMap {
+ PRFileDesc *fd;
+ PRFileMapProtect prot;
+ _MDFileMap md;
+};
+
+/************************************************************************/
+
+/*
+** File descriptors of the NSPR layer can be in one of the
+** following states (stored in the 'state' field of struct
+** PRFilePrivate):
+** - _PR_FILEDESC_OPEN: The OS fd is open.
+** - _PR_FILEDESC_CLOSED: The OS fd is closed. The PRFileDesc
+** is still open but is unusable. The only operation allowed
+** on the PRFileDesc is PR_Close().
+** - _PR_FILEDESC_FREED: The OS fd is closed and the PRFileDesc
+** structure is freed.
+*/
+
+#define _PR_FILEDESC_OPEN 0xaaaaaaaa /* 1010101... */
+#define _PR_FILEDESC_CLOSED 0x55555555 /* 0101010... */
+#define _PR_FILEDESC_FREED 0x11111111
+
+/*
+** A boolean type with an additional "unknown" state
+*/
+
+typedef enum {
+ _PR_TRI_TRUE = 1,
+ _PR_TRI_FALSE = 0,
+ _PR_TRI_UNKNOWN = -1
+} _PRTriStateBool;
+
+struct PRFilePrivate {
+ PRInt32 state;
+ PRBool nonblocking;
+ _PRTriStateBool inheritable;
+ PRFileDesc *next;
+ PRIntn lockCount; /* 0: not locked
+ * -1: a native lockfile call is in progress
+ * > 0: # times the file is locked */
+#ifdef _PR_HAVE_PEEK_BUFFER
+ char *peekBuffer;
+ PRInt32 peekBufSize;
+ PRInt32 peekBytes;
+#endif
+#if !defined(_PR_HAVE_O_APPEND)
+ PRBool appendMode; /* Some platforms don't have O_APPEND or its
+ * equivalent, so they have to seek to end of
+ * file on write if the file was opened in
+ * append mode. See Bugzilla 4090, 276330. */
+#endif
+ _MDFileDesc md;
+#ifdef _PR_NEED_SECRET_AF
+ PRUint16 af; /* If the platform's implementation of accept()
+ * requires knowing the address family of the
+ * socket, we save the address family here. */
+#endif
+};
+
+#ifdef _WIN64
+#define PR_PRIdOSFD "lld" /* for printing PROsfd */
+#define PR_PRIxOSFD "llx"
+#define PR_SCNdOSFD "lld" /* for scanning PROsfd */
+#define PR_SCNxOSFD "llx"
+#else
+#define PR_PRIdOSFD "ld" /* for printing PROsfd */
+#define PR_PRIxOSFD "lx"
+#define PR_SCNdOSFD "ld" /* for scanning PROsfd */
+#define PR_SCNxOSFD "lx"
+#endif
+
+struct PRDir {
+ PRDirEntry d;
+ _MDDir md;
+};
+
+#ifdef MOZ_UNICODE
+struct PRDirUTF16 {
+ PRDirEntry d;
+ _MDDirUTF16 md;
+};
+#endif /* MOZ_UNICODE */
+
+extern void _PR_InitSegs(void);
+extern void _PR_InitStacks(void);
+extern void _PR_InitTPD(void);
+extern void _PR_InitMem(void);
+extern void _PR_InitEnv(void);
+extern void _PR_InitCMon(void);
+extern void _PR_InitIO(void);
+extern void _PR_InitLog(void);
+extern void _PR_InitNet(void);
+extern void _PR_InitClock(void);
+extern void _PR_InitLinker(void);
+extern void _PR_InitAtomic(void);
+extern void _PR_InitCPUs(void);
+extern void _PR_InitDtoa(void);
+extern void _PR_InitTime(void);
+extern void _PR_InitMW(void);
+extern void _PR_InitRWLocks(void);
+extern void _PR_NotifyCondVar(PRCondVar *cvar, PRThread *me);
+extern void _PR_CleanupThread(PRThread *thread);
+extern void _PR_CleanupCallOnce(void);
+extern void _PR_CleanupMW(void);
+extern void _PR_CleanupTime(void);
+extern void _PR_CleanupDtoa(void);
+extern void _PR_ShutdownLinker(void);
+extern void _PR_CleanupEnv(void);
+extern void _PR_CleanupIO(void);
+extern void _PR_CleanupCMon(void);
+extern void _PR_CleanupNet(void);
+extern void _PR_CleanupLayerCache(void);
+extern void _PR_CleanupStacks(void);
+#ifdef WINNT
+extern void _PR_CleanupCPUs(void);
+#endif
+extern void _PR_CleanupThreads(void);
+extern void _PR_CleanupTPD(void);
+extern void _PR_Cleanup(void);
+extern void _PR_LogCleanup(void);
+extern void _PR_InitLayerCache(void);
+
+extern PRBool _pr_initialized;
+extern void _PR_ImplicitInitialization(void);
+extern PRBool _PR_Obsolete(const char *obsolete, const char *preferred);
+
+/************************************************************************/
+
+struct PRSegment {
+ void *vaddr;
+ PRUint32 size;
+ PRUintn flags;
+#if defined(_PR_PTHREADS)
+#else /* defined(_PR_PTHREADS) */
+ _MDSegment md;
+#endif /* defined(_PR_PTHREADS) */
+};
+
+/* PRSegment.flags */
+#define _PR_SEG_VM 0x1
+
+/************************************************************************/
+
+extern PRInt32 _pr_pageSize;
+extern PRInt32 _pr_pageShift;
+
+extern PRLogModuleInfo *_pr_clock_lm;
+extern PRLogModuleInfo *_pr_cmon_lm;
+extern PRLogModuleInfo *_pr_io_lm;
+extern PRLogModuleInfo *_pr_cvar_lm;
+extern PRLogModuleInfo *_pr_mon_lm;
+extern PRLogModuleInfo *_pr_linker_lm;
+extern PRLogModuleInfo *_pr_sched_lm;
+extern PRLogModuleInfo *_pr_thread_lm;
+extern PRLogModuleInfo *_pr_gc_lm;
+
+extern PRFileDesc *_pr_stdin;
+extern PRFileDesc *_pr_stdout;
+extern PRFileDesc *_pr_stderr;
+
+/* Zone allocator */
+/*
+** The zone allocator code has hardcoded pthread types and
+** functions, so it can only be used in the pthreads version.
+** This can be fixed by replacing the hardcoded pthread types
+** and functions with macros that expand to the native thread
+** types and functions on each platform.
+*/
+#if defined(_PR_PTHREADS) && !defined(_PR_DCETHREADS)
+#define _PR_ZONE_ALLOCATOR
+#endif
+
+#ifdef _PR_ZONE_ALLOCATOR
+extern void _PR_InitZones(void);
+extern void _PR_DestroyZones(void);
+#endif
+
+/* Overriding malloc, free, etc. */
+#if !defined(_PR_NO_PREEMPT) && defined(XP_UNIX) \
+ && !defined(_PR_PTHREADS) && !defined(_PR_GLOBAL_THREADS_ONLY) \
+ && !defined(PURIFY) \
+ && !defined(DARWIN) \
+ && !defined(NEXTSTEP) \
+ && !defined(QNX) \
+ && !(defined (UNIXWARE) && defined (USE_SVR4_THREADS))
+#define _PR_OVERRIDE_MALLOC
+#endif
+
+/*************************************************************************
+* External machine-dependent code provided by each OS. * *
+*************************************************************************/
+
+/* Initialization related */
+extern void _PR_MD_EARLY_INIT(void);
+#define _PR_MD_EARLY_INIT _MD_EARLY_INIT
+
+extern void _PR_MD_INTERVAL_INIT(void);
+#define _PR_MD_INTERVAL_INIT _MD_INTERVAL_INIT
+
+NSPR_API(void) _PR_MD_FINAL_INIT(void);
+#define _PR_MD_FINAL_INIT _MD_FINAL_INIT
+
+extern void _PR_MD_EARLY_CLEANUP(void);
+#define _PR_MD_EARLY_CLEANUP _MD_EARLY_CLEANUP
+
+/* Process control */
+
+extern PRProcess * _PR_MD_CREATE_PROCESS(
+ const char *path,
+ char *const *argv,
+ char *const *envp,
+ const PRProcessAttr *attr);
+#define _PR_MD_CREATE_PROCESS _MD_CREATE_PROCESS
+
+extern PRStatus _PR_MD_DETACH_PROCESS(PRProcess *process);
+#define _PR_MD_DETACH_PROCESS _MD_DETACH_PROCESS
+
+extern PRStatus _PR_MD_WAIT_PROCESS(PRProcess *process, PRInt32 *exitCode);
+#define _PR_MD_WAIT_PROCESS _MD_WAIT_PROCESS
+
+extern PRStatus _PR_MD_KILL_PROCESS(PRProcess *process);
+#define _PR_MD_KILL_PROCESS _MD_KILL_PROCESS
+
+/* Current Time */
+NSPR_API(PRTime) _PR_MD_NOW(void);
+#define _PR_MD_NOW _MD_NOW
+
+/* Environment related */
+extern char* _PR_MD_GET_ENV(const char *name);
+#define _PR_MD_GET_ENV _MD_GET_ENV
+
+extern PRIntn _PR_MD_PUT_ENV(const char *name);
+#define _PR_MD_PUT_ENV _MD_PUT_ENV
+
+/* Atomic operations */
+
+extern void _PR_MD_INIT_ATOMIC(void);
+#define _PR_MD_INIT_ATOMIC _MD_INIT_ATOMIC
+
+extern PRInt32 _PR_MD_ATOMIC_INCREMENT(PRInt32 *);
+#define _PR_MD_ATOMIC_INCREMENT _MD_ATOMIC_INCREMENT
+
+extern PRInt32 _PR_MD_ATOMIC_ADD(PRInt32 *, PRInt32);
+#define _PR_MD_ATOMIC_ADD _MD_ATOMIC_ADD
+
+extern PRInt32 _PR_MD_ATOMIC_DECREMENT(PRInt32 *);
+#define _PR_MD_ATOMIC_DECREMENT _MD_ATOMIC_DECREMENT
+
+extern PRInt32 _PR_MD_ATOMIC_SET(PRInt32 *, PRInt32);
+#define _PR_MD_ATOMIC_SET _MD_ATOMIC_SET
+
+/* Garbage collection */
+
+/*
+** Save the registers that the GC would find interesting into the thread
+** "t". isCurrent will be non-zero if the thread state that is being
+** saved is the currently executing thread. Return the address of the
+** first register to be scanned as well as the number of registers to
+** scan in "np".
+**
+** If "isCurrent" is non-zero then it is allowed for the thread context
+** area to be used as scratch storage to hold just the registers
+** necessary for scanning.
+*/
+extern PRWord *_MD_HomeGCRegisters(PRThread *t, int isCurrent, int *np);
+
+/* Time intervals */
+
+extern PRIntervalTime _PR_MD_GET_INTERVAL(void);
+#define _PR_MD_GET_INTERVAL _MD_GET_INTERVAL
+
+extern PRIntervalTime _PR_MD_INTERVAL_PER_SEC(void);
+#define _PR_MD_INTERVAL_PER_SEC _MD_INTERVAL_PER_SEC
+
+/* Affinity masks */
+
+extern PRInt32 _PR_MD_SETTHREADAFFINITYMASK(PRThread *thread, PRUint32 mask );
+#define _PR_MD_SETTHREADAFFINITYMASK _MD_SETTHREADAFFINITYMASK
+
+extern PRInt32 _PR_MD_GETTHREADAFFINITYMASK(PRThread *thread, PRUint32 *mask);
+#define _PR_MD_GETTHREADAFFINITYMASK _MD_GETTHREADAFFINITYMASK
+
+/* File locking */
+
+extern PRStatus _PR_MD_LOCKFILE(PROsfd osfd);
+#define _PR_MD_LOCKFILE _MD_LOCKFILE
+
+extern PRStatus _PR_MD_TLOCKFILE(PROsfd osfd);
+#define _PR_MD_TLOCKFILE _MD_TLOCKFILE
+
+extern PRStatus _PR_MD_UNLOCKFILE(PROsfd osfd);
+#define _PR_MD_UNLOCKFILE _MD_UNLOCKFILE
+
+/* Memory-mapped files */
+
+extern PRStatus _PR_MD_CREATE_FILE_MAP(PRFileMap *fmap, PRInt64 size);
+#define _PR_MD_CREATE_FILE_MAP _MD_CREATE_FILE_MAP
+
+extern PRInt32 _PR_MD_GET_MEM_MAP_ALIGNMENT(void);
+#define _PR_MD_GET_MEM_MAP_ALIGNMENT _MD_GET_MEM_MAP_ALIGNMENT
+
+extern void * _PR_MD_MEM_MAP(
+ PRFileMap *fmap,
+ PROffset64 offset,
+ PRUint32 len);
+#define _PR_MD_MEM_MAP _MD_MEM_MAP
+
+extern PRStatus _PR_MD_MEM_UNMAP(void *addr, PRUint32 size);
+#define _PR_MD_MEM_UNMAP _MD_MEM_UNMAP
+
+extern PRStatus _PR_MD_CLOSE_FILE_MAP(PRFileMap *fmap);
+#define _PR_MD_CLOSE_FILE_MAP _MD_CLOSE_FILE_MAP
+
+/* Named Shared Memory */
+
+/*
+** Declare PRSharedMemory.
+*/
+struct PRSharedMemory
+{
+ char *ipcname; /* after conversion to native */
+ PRSize size; /* from open */
+ PRIntn mode; /* from open */
+ PRIntn flags; /* from open */
+#if defined(PR_HAVE_POSIX_NAMED_SHARED_MEMORY)
+ int id;
+#elif defined(PR_HAVE_SYSV_NAMED_SHARED_MEMORY)
+ int id;
+#elif defined(PR_HAVE_WIN32_NAMED_SHARED_MEMORY)
+ HANDLE handle;
+#else
+ PRUint32 nothing; /* placeholder, nothing behind here */
+#endif
+ PRUint32 ident; /* guard word at end of struct */
+#define _PR_SHM_IDENT 0xdeadbad
+};
+
+extern PRSharedMemory * _MD_OpenSharedMemory(
+ const char *name,
+ PRSize size,
+ PRIntn flags,
+ PRIntn mode
+);
+#define _PR_MD_OPEN_SHARED_MEMORY _MD_OpenSharedMemory
+
+extern void * _MD_AttachSharedMemory( PRSharedMemory *shm, PRIntn flags );
+#define _PR_MD_ATTACH_SHARED_MEMORY _MD_AttachSharedMemory
+
+extern PRStatus _MD_DetachSharedMemory( PRSharedMemory *shm, void *addr );
+#define _PR_MD_DETACH_SHARED_MEMORY _MD_DetachSharedMemory
+
+extern PRStatus _MD_CloseSharedMemory( PRSharedMemory *shm );
+#define _PR_MD_CLOSE_SHARED_MEMORY _MD_CloseSharedMemory
+
+extern PRStatus _MD_DeleteSharedMemory( const char *name );
+#define _PR_MD_DELETE_SHARED_MEMORY _MD_DeleteSharedMemory
+
+extern PRFileMap* _md_OpenAnonFileMap(
+ const char *dirName,
+ PRSize size,
+ PRFileMapProtect prot
+);
+#define _PR_MD_OPEN_ANON_FILE_MAP _md_OpenAnonFileMap
+
+extern PRStatus _md_ExportFileMapAsString(
+ PRFileMap *fm,
+ PRSize bufSize,
+ char *buf
+);
+#define _PR_MD_EXPORT_FILE_MAP_AS_STRING _md_ExportFileMapAsString
+
+extern PRFileMap * _md_ImportFileMapFromString(
+ const char *fmstring
+);
+#define _PR_MD_IMPORT_FILE_MAP_FROM_STRING _md_ImportFileMapFromString
+
+
+
+/* Interprocess communications (IPC) */
+
+/*
+ * The maximum length of an NSPR IPC name, including the
+ * terminating null byte.
+ */
+#define PR_IPC_NAME_SIZE 1024
+
+/*
+ * Types of NSPR IPC objects
+ */
+typedef enum {
+ _PRIPCSem, /* semaphores */
+ _PRIPCShm /* shared memory segments */
+} _PRIPCType;
+
+/*
+ * Make a native IPC name from an NSPR IPC name.
+ */
+extern PRStatus _PR_MakeNativeIPCName(
+ const char *name, /* NSPR IPC name */
+ char *result, /* result buffer */
+ PRIntn size, /* size of result buffer */
+ _PRIPCType type /* type of IPC object */
+);
+
+/* Socket call error code */
+
+NSPR_API(PRInt32) _PR_MD_GET_SOCKET_ERROR(void);
+#define _PR_MD_GET_SOCKET_ERROR _MD_GET_SOCKET_ERROR
+
+/* Get name of current host */
+extern PRStatus _PR_MD_GETHOSTNAME(char *name, PRUint32 namelen);
+#define _PR_MD_GETHOSTNAME _MD_GETHOSTNAME
+
+extern PRStatus _PR_MD_GETSYSINFO(PRSysInfo cmd, char *name, PRUint32 namelen);
+#define _PR_MD_GETSYSINFO _MD_GETSYSINFO
+
+/* File descriptor inheritance */
+
+/*
+ * If fd->secret->inheritable is _PR_TRI_UNKNOWN and we need to
+ * know the inheritable attribute of the fd, call this function
+ * to find that out. This typically requires a system call.
+ */
+extern void _PR_MD_QUERY_FD_INHERITABLE(PRFileDesc *fd);
+#define _PR_MD_QUERY_FD_INHERITABLE _MD_QUERY_FD_INHERITABLE
+
+/* --- PR_GetRandomNoise() related things --- */
+
+extern PRSize _PR_MD_GetRandomNoise( void *buf, PRSize size );
+#define _PR_MD_GET_RANDOM_NOISE(buf,size) _PR_MD_GetRandomNoise((buf),(size))
+extern PRSize _pr_CopyLowBits( void *dest, PRSize dstlen, void *src, PRSize srclen );
+
+/* end PR_GetRandomNoise() related */
+
+#ifdef XP_BEOS
+
+extern PRLock *_connectLock;
+
+typedef struct _ConnectListNode {
+ PRInt32 osfd;
+ PRNetAddr addr;
+ PRUint32 addrlen;
+ PRIntervalTime timeout;
+} ConnectListNode;
+
+extern ConnectListNode connectList[64];
+
+extern PRUint32 connectCount;
+
+#endif /* XP_BEOS */
+
+PR_END_EXTERN_C
+
+#endif /* primpl_h___ */