Makefile.win - gmake Makefile for building MPI with MSVC on NT.

1 files changed, 275 insertions, 0 deletions

diff --git a/security/nss/lib/freebl/mpi/Makefile.win b/security/nss/lib/freebl/mpi/Makefile.win
new file mode 100644
index 000000000..bc75dcaed
--- /dev/null
+++ b/security/nss/lib/freebl/mpi/Makefile.win
@@ -0,0 +1,275 @@
+##
+## Makefile.win - gmake Makefile for building MPI with MSVC on NT
+##
+## The contents of this file are subject to the Mozilla Public
+## License Version 1.1 (the "License"); you may not use this file
+## except in compliance with the License. You may obtain a copy of
+## the License at http://www.mozilla.org/MPL/
+##
+## Software distributed under the License is distributed on an "AS
+## IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+## implied. See the License for the specific language governing
+## rights and limitations under the License.
+##
+## The Original Code is the MPI Arbitrary Precision Integer Arithmetic
+## library.
+##
+## The Initial Developer of the Original Code is 
+## Michael J. Fromberger <sting@linguist.dartmouth.edu>
+##
+## Portions created by Michael J. Fromberger are 
+## Copyright (C) 1998, 2000 Michael J. Fromberger. All Rights Reserved.
+##
+## Contributor(s):
+##	Netscape Communications Corporation
+##
+## Alternatively, the contents of this file may be used under the
+## terms of the GNU General Public License Version 2 or later (the
+## "GPL"), in which case the provisions of the GPL are applicable
+## instead of those above.  If you wish to allow use of your
+## version of this file only under the terms of the GPL and not to
+## allow others to use your version of this file under the MPL,
+## indicate your decision by deleting the provisions above and
+## replace them with the notice and other provisions required by
+## the GPL.  If you do not delete the provisions above, a recipient
+## may use your version of this file under either the MPL or the
+## GPL.
+## 
+##
+## $Id$
+##
+
+## Define CC to be the C compiler you wish to use.  The GNU cc
+## compiler (gcc) should work, at the very least
+#CC=cc
+#CC=gcc
+CC=cl.exe
+AS=ml.exe
+
+## 
+## Define PERL to point to your local Perl interpreter.  It
+## should be Perl 5.x, although it's conceivable that Perl 4
+## might work ... I haven't tested it.
+##
+#PERL=/usr/bin/perl
+PERL=perl
+
+##
+## Define CFLAGS to contain any local options your compiler
+## setup requires.
+##
+## Conditional compilation options are no longer here; see
+## the file 'mpi-config.h' instead.
+##
+MPICMN = -I. -DMP_API_COMPATIBLE -DMP_IOFUNC
+
+#NT
+AS_SRCS = mpi_x86.asm
+MPICMN += -DMP_ASSEMBLY_MULTIPLY -DMP_ASSEMBLY_SQUARE -DMP_ASSEMBLY_DIV_2DX1D
+#CFLAGS= -Od -Z7 -MD -W3 -nologo -D_X86_ -DXP_PC \
+ -DDEBUG -D_DEBUG -UNDEBUG -DWIN32 -D_WINDOWS -DWIN95 $(MPICMN)
+#CFLAGS = -O2 -MD -W3 -nologo -D_X86_ -DXP_PC -UDEBUG -U_DEBUG -DNDEBUG \
+ -DWIN32 -D_WINDOWS -DWIN95 $(MPICMN)
+#CFLAGS = -Od -Z7 -MD -W3 -nologo -D_X86_ -DXP_PC -UDEBUG -U_DEBUG -DNDEBUG \
+ -DWIN32 -D_WINDOWS -DWIN95 $(MPICMN)
+CFLAGS = -O2 -Z7 -MD -W3 -nologo -D_X86_ -DXP_PC -UDEBUG -U_DEBUG -DNDEBUG \
+ -DWIN32 -D_WINDOWS -DWIN95 $(MPICMN)
+ASFLAGS = -Cp -Sn -Zi -coff -I. 
+
+##
+## Define LIBS to include any libraries you need to link against.
+## If NO_TABLE is define, LIBS should include '-lm' or whatever is
+## necessary to bring in the math library.  Otherwise, it can be
+## left alone, unless your system has other peculiar requirements.
+##
+LIBS=#-lmalloc#-lefence#-lm
+
+## 
+## Define RANLIB to be the library header randomizer; you might not
+## need this on some systems (just set it to 'echo' on these systems,
+## such as IRIX)
+##
+RANLIB=echo
+
+##
+## This is the version string used for the documentation and 
+## building the distribution tarball.  Don't mess with it unless
+## you are releasing a new version
+VERS=1.7p6
+
+## ----------------------------------------------------------------------
+## You probably don't need to change anything below this line...
+##
+
+##
+## This is the list of source files that need to be packed into
+## the distribution file
+SRCS=   mpi.c mpprime.c mplogic.c mpmontg.c mpi-test.c primes.c tests/ \
+	utils/gcd.c utils/invmod.c utils/lap.c \
+	utils/ptab.pl utils/sieve.c utils/isprime.c\
+	utils/dec2hex.c utils/hex2dec.c utils/bbs_rand.c \
+	utils/bbsrand.c utils/prng.c utils/primegen.c \
+	utils/basecvt.c utils/makeprime.c\
+	utils/fact.c utils/exptmod.c utils/pi.c utils/metime.c \
+	utils/mpi.h utils/mpprime.h mulsqr.c \
+	make-test-arrays test-arrays.txt all-tests make-logtab \
+	types.pl stats timetest multest
+
+## These are the header files that go into the distribution file
+HDRS=mpi.h mpi-config.h utils/mpi.h utils/mpi-config.h mpprime.h mplogic.h \
+     utils/bbs_rand.h tests/mpi.h tests/mpprime.h
+
+## These are the documentation files that go into the distribution file
+DOCS=README doc utils/README utils/PRIMES 
+
+## This is the list of tools built by 'make tools'
+TOOLS=gcd.exe invmod.exe isprime.exe lap.exe dec2hex.exe hex2dec.exe \
+ primegen.exe prng.exe basecvt.exe fact.exe exptmod.exe pi.exe makeprime.exe
+
+AS_OBJS = $(AS_SRCS:.asm=.obj)
+LIBOBJS = mpprime.obj mpmontg.obj mplogic.obj mpi.obj $(AS_OBJS)
+LIBHDRS = mpi-config.h mpi-priv.h mpi.h
+APPHDRS = mpi-config.h mpi.h mplogic.h mpprime.h
+
+
+help:
+	@ echo ""
+	@ echo "The following targets can be built with this Makefile:"
+	@ echo ""
+	@ echo "mpi.lib     - arithmetic and prime testing library"
+	@ echo "mpi-test     - test driver (requires MP_IOFUNC)"
+	@ echo "tools        - command line tools"
+	@ echo "doc          - manual pages for tools"
+	@ echo "clean        - clean up objects and such"
+	@ echo "distclean    - get ready for distribution"
+	@ echo "dist         - distribution tarball"
+	@ echo ""
+
+.SUFFIXES: .c .obj .i .lib .exe .asm
+
+.c.i:
+	$(CC) $(CFLAGS) -E $< > $@
+
+.c.obj: 
+	$(CC) $(CFLAGS) -c $<
+
+.asm.obj:
+	$(AS) $(ASFLAGS) -c $<
+
+.obj.exe:
+	$(CC) $(CFLAGS) -Fo$@ $<
+
+#---------------------------------------
+
+$(LIBOBJS): $(LIBHDRS)
+
+logtab.h: make-logtab
+	$(PERL) make-logtab > logtab.h
+
+mpi.obj: mpi.c logtab.h $(LIBHDRS)
+
+mplogic.obj: mplogic.c mpi-priv.h mplogic.h $(LIBHDRS)
+
+mpmontg.obj: mpmontg.c mpi-priv.h mplogic.h mpprime.h $(LIBHDRS)
+
+mpprime.obj: mpprime.c mpi-priv.h mpprime.h mplogic.h primes.c $(LIBHDRS)
+
+mpi_mips.obj: mpi_mips.s
+	$(CC) -Fo$@ $(ASFLAGS) -c mpi_mips.s
+
+mpi.lib: $(LIBOBJS)
+	ar -cvr mpi.lib $(LIBOBJS)
+	$(RANLIB) mpi.lib
+
+#---------------------------------------
+
+MPTESTOBJS = mptest1.obj mptest2.obj mptest3.obj mptest3a.obj mptest4.obj \
+ mptest4a.obj mptest4b.obj mptest6.obj mptest7.obj mptest8.obj mptest9.obj
+MPTESTS = $(MPTESTOBJS:.obj=.exe)
+
+$(MPTESTOBJS): mptest%.obj: tests/mptest-%.c $(LIBHDRS)
+	$(CC) $(CFLAGS) -Fo$@ -c $<
+
+$(MPTESTS): mptest%.exe: mptest%.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^ 
+
+tests: mptest1.exe mptest2.exe mptest3.exe mptest3a.exe mptest4.exe \
+ mptest4a.exe mptest4b.exe mptest6.exe bbsrand.exe
+
+utests: mptest7.exe mptest8.exe mptest9.exe
+
+#---------------------------------------
+
+EXTRAOBJS = bbsrand.obj bbs_rand.obj prng.obj
+UTILOBJS = primegen.obj metime.obj identest.obj basecvt.obj fact.obj \
+ exptmod.obj pi.obj makeprime.obj karatsuba.obj gcd.obj invmod.obj lap.obj \
+ isprime.obj dec2hex.obj hex2dec.obj
+UTILS = $(UTILOBJS:.obj=.exe) 
+
+$(UTILS): %.exe : %.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^ 
+
+$(UTILOBJS) $(EXTRAOBJS): %.obj : utils/%.c $(LIBHDRS)
+	$(CC) $(CFLAGS) -Fo$@ -c $<
+
+prng.exe: prng.obj bbs_rand.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^
+
+bbsrand.exe: bbsrand.obj bbs_rand.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^
+
+utils: $(UTILS) prng.exe bbsrand.exe
+
+#---------------------------------------
+
+test-info.c: test-arrays.txt
+	$(PERL) make-test-arrays test-arrays.txt > test-info.c
+
+mpi-test.obj: mpi-test.c test-info.c $(LIBHDRS)
+	$(CC) $(CFLAGS) -Fo$@ -c $<
+
+mpi-test.exe: mpi-test.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^
+
+mdxptest.obj: mdxptest.c $(LIBHDRS) mpi-priv.h
+
+mdxptest.exe: mdxptest.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^
+
+mulsqr.obj: mulsqr.c logtab.h mpi.h mpi-config.h mpprime.h 
+	$(CC) $(CFLAGS) -DMP_SQUARE=1 -Fo$@ -c mulsqr.c 
+
+mulsqr.exe: mulsqr.obj mpi.lib $(LIBS)
+	$(CC) $(CFLAGS) -Fo$@ $^
+
+#---------------------------------------
+
+alltests: tests utests mpi-test.exe
+
+tools: $(TOOLS)
+
+doc:
+	(cd doc; ./build)
+
+clean:
+	rm -f *.obj *.lib *.pdb
+	rm -f utils/*.obj
+
+distclean: clean
+	rm -f mptest? mpi-test metime mulsqr karatsuba
+	rm -f mptest?a mptest?b
+	rm -f utils/mptest?
+	rm -f test-info.c logtab.h
+	rm -f mpi.lib
+	rm -f $(TOOLS)
+
+dist: Makefile $(HDRS) $(SRCS) $(DOCS)
+	tar -cvf mpi-$(VERS).tar Makefile $(HDRS) $(SRCS) $(DOCS)
+	pgps -ab mpi-$(VERS).tar
+	chmod +r mpi-$(VERS).tar.asc
+	gzip -9 mpi-$(VERS).tar
+
+
+print: 
+	@echo LIBOBJS = $(LIBOBJS)
+# END