1 files changed, 105 insertions, 0 deletions
diff --git a/html/hints/parse b/html/hints/parse
new file mode 100644
index 0000000..d252351
--- /dev/null
+++ b/html/hints/parse
@@ -0,0 +1,105 @@
+Compilation:
+	Usual thing: rm -f Config.local ; make for vanilla
+			make refconf for reference clock (e. g. DCF77)
+
+Directory contents:
+
+	hints/PARSE	- this file
+
+	xntpd/refclock_parse.c
+			- reference clock support for DCF77/GPS in xntp
+	parse/parse.c
+			- Reference clock data parser framework
+	parse/parse_conf.c
+			- parser configuration (clock types)
+	parse/clk_meinberg.c
+			- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
+	parse/clk_schmid.c
+			- Schmid receiver (DCF77)
+	parse/clk_rawdcf.c
+			- 100/200ms pulses via 50 Baud line (DCF77)
+	parse/clk_dcf7000.c
+			- ELV DCF7000 (DCF77)
+	parse/clk_trimble.c
+			- Trimble SV6 GPS receiver
+
+			  If you want to add new clock types please check
+			  with kardel@informatik.uni-erlangen.de. These files
+			  implement the conversion of RS232 data streams into
+			  timing information used by refclock_parse.c which is
+			  mostly generic except for NTP configuration constants.
+
+	parse/Makefile.kernel
+			- *SIMPLE* makefile to build a loadable STREAMS
+			  module for SunOS 4.x / SunOS 5.x systems
+
+	parse/parsestreams.c
+			- SUN Streams module (loadable) for radio clocks
+			  This streams module is designed for SunOS 4.1.X.
+
+	parse/parsesolaris.c
+			- SUN Streams module (loadable) for radio clocks.
+			  This streams module is designed for SunOS 5.x
+			  Beware this is still new - so it might crash
+			  your machine (we have seen it working, though).
+
+	parse/parsetest.c
+			- simple test program for STREAMS module. Its so simple,
+			  that it doesn't even set TTY-modes, thus they got to
+			  be correct on startup - works for Meinberg receivers
+
+	parse/testdcf.c
+			- test program for raw DCF77 (100/200ms pulses)
+			  receivers
+
+        include/parse.h - interface to "parse" module and more
+        include/parse_conf.h
+			- interface to "parse" configuration
+
+	include/sys/parsestreams.h
+			- STREAMS specific definitions
+
+	scripts/support
+			- scripts (perl & sh) for statistics and rc startup
+			  the startup scripts are used in Erlangen for
+			  starting the daemon on a variety of Suns and HPs
+			  and for Reference Clock startup on Suns
+			  These scripts may or may not be helpful to you.
+
+Supported clocks:
+	Meinberg DCF U/A 31
+	Meinberg PZF535/TCXO	(Software revision PZFUERL 4.6)
+	Meinberg PZF535/OCXO	(Software revision PZFUERL 4.6)
+	Meinberg GPS166		(Software version for Uni-Erlangen)
+	ELV DCF7000		(not recommended - casual/emergency use only)
+	Conrad DCF77 receiver	(email: time@informatik.uni-erlangen.de)
+	  + level converter
+	TimeBrick		(email: time@informatik.uni-erlangen.de)
+	Schmid Receiver Kit
+	Trimble SV6 GPS receiver
+
+Addresses:
+  Meinberg Funkuhren
+  Auf der Landwehr 22
+  31812 Bad Pyrmont
+  Germany
+  Tel.: 05281/20 18
+  FAX:  05281/60 81 80
+
+  ELV Kundenservice
+  Postfach 1000
+  26787 Leer
+  Germany
+  Tel.: 0491/60 08 88
+
+  Walter Schmidt
+  Eichwisrain 14
+  8634 Hombrechtikon
+  Switzerland
+
+If you have problems mail to:
+
+	time@informatik.uni-erlangen.de
+
+We'll help (conditions permitting)
+