diff options
Diffstat (limited to 'buildpkg.sh.in')
| -rw-r--r-- | buildpkg.sh.in | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/buildpkg.sh.in b/buildpkg.sh.in new file mode 100644 index 00000000..656754c1 --- /dev/null +++ b/buildpkg.sh.in @@ -0,0 +1,550 @@ +#!/bin/sh +# +# Fake Root Solaris/SVR4/SVR5 Build System - Prototype +# +# The following code has been provide under Public Domain License. I really +# don't care what you use it for. Just as long as you don't complain to me +# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org) +# +umask 022 +# +# Options for building the package +# You can create a openssh-config.local with your customized options +# +REMOVE_FAKE_ROOT_WHEN_DONE=yes +# +# uncommenting TEST_DIR and using +# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty +# and +# PKGNAME=tOpenSSH should allow testing a package without interfering +# with a real OpenSSH package on a system. This is not needed on systems +# that support the -R option to pkgadd. +#TEST_DIR=/var/tmp # leave commented out for production build +PKGNAME=OpenSSH +SYSVINIT_NAME=opensshd +MAKE=${MAKE:="make"} +SSHDUID=67 # Default privsep uid +SSHDGID=67 # Default privsep gid +# uncomment these next three as needed +#PERMIT_ROOT_LOGIN=no +#X11_FORWARDING=yes +#USR_LOCAL_IS_SYMLINK=yes +# System V init run levels +SYSVINITSTART=S98 +SYSVINITSTOPT=K30 +# We will source these if they exist +POST_MAKE_INSTALL_FIXES=./pkg_post_make_install_fixes.sh +POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh +# We'll be one level deeper looking for these +PKG_PREINSTALL_LOCAL=../pkg-preinstall.local +PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local +PKG_PREREMOVE_LOCAL=../pkg-preremove.local +PKG_POSTREMOVE_LOCAL=../pkg-postremove.local +PKG_REQUEST_LOCAL=../pkg-request.local +# end of sourced files +# +OPENSSHD_IN=@top_srcdir@/contrib/solaris/opensshd.in + +PATH_GROUPADD_PROG=@PATH_GROUPADD_PROG@ +PATH_USERADD_PROG=@PATH_USERADD_PROG@ +PATH_PASSWD_PROG=@PATH_PASSWD_PROG@ +# +# list of system directories we do NOT want to change owner/group/perms +# when installing our package +SYSTEM_DIR="/etc \ +/etc/init.d \ +/etc/rcS.d \ +/etc/rc0.d \ +/etc/rc1.d \ +/etc/rc2.d \ +/etc/opt \ +/opt \ +/opt/bin \ +/usr \ +/usr/bin \ +/usr/lib \ +/usr/sbin \ +/usr/share \ +/usr/share/man \ +/usr/share/man/man1 \ +/usr/share/man/man8 \ +/usr/local \ +/usr/local/bin \ +/usr/local/etc \ +/usr/local/libexec \ +/usr/local/man \ +/usr/local/man/man1 \ +/usr/local/man/man8 \ +/usr/local/sbin \ +/usr/local/share \ +/var \ +/var/opt \ +/var/run \ +/var/tmp \ +/tmp" + +# We may need to build as root so we make sure PATH is set up +# only set the path if it's not set already +[ -d /opt/bin ] && { + echo $PATH | grep ":/opt/bin" > /dev/null 2>&1 + [ $? -ne 0 ] && PATH=$PATH:/opt/bin +} +[ -d /usr/local/bin ] && { + echo $PATH | grep ":/usr/local/bin" > /dev/null 2>&1 + [ $? -ne 0 ] && PATH=$PATH:/usr/local/bin +} +[ -d /usr/ccs/bin ] && { + echo $PATH | grep ":/usr/ccs/bin" > /dev/null 2>&1 + [ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin +} +export PATH +# + +[ -f Makefile ] || { + echo "Please run this script from your build directory" + exit 1 +} + +# we will look for openssh-config.local to override the above options +[ -s ./openssh-config.local ] && . ./openssh-config.local + +START=`pwd` +FAKE_ROOT=$START/pkg + +## Fill in some details, like prefix and sysconfdir +for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir +do + eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2` +done + + +## Collect value of privsep user +for confvar in SSH_PRIVSEP_USER +do + eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h` +done + +## Set privsep defaults if not defined +if [ -z "$SSH_PRIVSEP_USER" ] +then + SSH_PRIVSEP_USER=sshd +fi + +## Extract common info requires for the 'info' part of the package. +VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'` + +ARCH=`uname -m` +DEF_MSG="\n" +OS_VER=`uname -v` +SCRIPT_SHELL=/sbin/sh +UNAME_S=`uname -s` +case ${UNAME_S} in + SunOS) UNAME_S=Solaris + ARCH=`uname -p` + RCS_D=yes + DEF_MSG="(default: n)" + ;; + SCO_SV) UNAME_S=OpenServer + OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'` + SCRIPT_SHELL=/bin/sh + RC1_D=no + DEF_MSG="(default: n)" + ;; +esac + +case `basename $0` in + buildpkg.sh) +## Start by faking root install +echo "Faking root install..." +[ -d $FAKE_ROOT ] && rm -fr $FAKE_ROOT +mkdir $FAKE_ROOT +${MAKE} install-nokeys DESTDIR=$FAKE_ROOT +if [ $? -gt 0 ] +then + echo "Fake root install failed, stopping." + exit 1 +fi + +## Setup our run level stuff while we are at it. +mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d + +## setup our initscript correctly +sed -e "s#%%configDir%%#${sysconfdir}#g" \ + -e "s#%%openSSHDir%%#$prefix#g" \ + -e "s#%%pidDir%%#${piddir}#g" \ + ${OPENSSHD_IN} > $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} +chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} + +[ "${PERMIT_ROOT_LOGIN}" = no ] && \ + perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \ + $FAKE_ROOT/${sysconfdir}/sshd_config +[ "${X11_FORWARDING}" = yes ] && \ + perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \ + $FAKE_ROOT/${sysconfdir}/sshd_config +# fix PrintMotd +perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \ + $FAKE_ROOT/${sysconfdir}/sshd_config + +# We don't want to overwrite config files on multiple installs +mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default +mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default +[ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ] && \ +mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default + +# local tweeks here +[ -s "${POST_MAKE_INSTALL_FIXES}" ] && . ${POST_MAKE_INSTALL_FIXES} + +cd $FAKE_ROOT + +## Ok, this is outright wrong, but it will work. I'm tired of pkgmk +## whining. +for i in *; do + PROTO_ARGS="$PROTO_ARGS $i=/$i"; +done + +## Build info file +echo "Building pkginfo file..." +cat > pkginfo << _EOF +PKG=$PKGNAME +NAME="OpenSSH Portable for ${UNAME_S}" +DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh." +VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html" +ARCH=$ARCH +VERSION=$VERSION +CATEGORY="Security,application" +BASEDIR=/ +CLASSES="none" +PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`" +_EOF + +## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS +echo "Building depend file..." +touch depend + +## Build space file +echo "Building space file..." +cat > space << _EOF +# extra space required by start/stop links added by installf in postinstall +$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1 +$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1 +_EOF +[ "$RC1_D" = no ] || \ +echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space +[ "$RCS_D" = yes ] && \ +echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space + +## Build preinstall file +echo "Building preinstall file..." +cat > preinstall << _EOF +#! ${SCRIPT_SHELL} +# +_EOF + +# local preinstall changes here +[ -s "${PKG_PREINSTALL_LOCAL}" ] && . ${PKG_PREINSTALL_LOCAL} + +cat >> preinstall << _EOF +# +[ "\${PRE_INS_STOP}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop +exit 0 +_EOF + +## Build postinstall file +echo "Building postinstall file..." +cat > postinstall << _EOF +#! ${SCRIPT_SHELL} +# +[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ] || \\ + cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\ + \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config +[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ] || \\ + cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\ + \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config +[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ] && { + [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ] || \\ + cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\ + \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds +} + +# make rc?.d dirs only if we are doing a test install +[ -n "${TEST_DIR}" ] && { + [ "$RCS_D" = yes ] && mkdir -p ${TEST_DIR}/etc/rcS.d + mkdir -p ${TEST_DIR}/etc/rc0.d + [ "$RC1_D" = no ] || mkdir -p ${TEST_DIR}/etc/rc1.d + mkdir -p ${TEST_DIR}/etc/rc2.d +} + +if [ "\${USE_SYM_LINKS}" = yes ] +then + [ "$RCS_D" = yes ] && \ +installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s + [ "$RC1_D" = no ] || \ + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s +else + [ "$RCS_D" = yes ] && \ +installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l + [ "$RC1_D" = no ] || \ + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l + installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l +fi + +# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh) +[ -d $piddir ] || installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys + +_EOF + +# local postinstall changes here +[ -s "${PKG_POSTINSTALL_LOCAL}" ] && . ${PKG_POSTINSTALL_LOCAL} + +cat >> postinstall << _EOF +installf -f ${PKGNAME} + +# Use chroot to handle PKG_INSTALL_ROOT +if [ ! -z "\${PKG_INSTALL_ROOT}" ] +then + chroot="chroot \${PKG_INSTALL_ROOT}" +fi +# If this is a test build, we will skip the groupadd/useradd/passwd commands +if [ ! -z "${TEST_DIR}" ] +then + chroot=echo +fi + +if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null +then + echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user" + echo "or group." +else + echo "UsePrivilegeSeparation enabled in config (or defaulting to on)." + + # create group if required + if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null + then + echo "PrivSep group $SSH_PRIVSEP_USER already exists." + else + # Use gid of 67 if possible + if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null + then + : + else + sshdgid="-g $SSHDGID" + fi + echo "Creating PrivSep group $SSH_PRIVSEP_USER." + \$chroot ${PATH_GROUPADD_PROG} \$sshdgid $SSH_PRIVSEP_USER + fi + + # Create user if required + if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null + then + echo "PrivSep user $SSH_PRIVSEP_USER already exists." + else + # Use uid of 67 if possible + if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDGID'\$' >/dev/null + then + : + else + sshduid="-u $SSHDUID" + fi + echo "Creating PrivSep user $SSH_PRIVSEP_USER." + \$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER + \$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER + fi +fi + +[ "\${POST_INS_START}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start +exit 0 +_EOF + +## Build preremove file +echo "Building preremove file..." +cat > preremove << _EOF +#! ${SCRIPT_SHELL} +# +${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop +_EOF + +# local preremove changes here +[ -s "${PKG_PREREMOVE_LOCAL}" ] && . ${PKG_PREREMOVE_LOCAL} + +cat >> preremove << _EOF +exit 0 +_EOF + +## Build postremove file +echo "Building postremove file..." +cat > postremove << _EOF +#! ${SCRIPT_SHELL} +# +_EOF + +# local postremove changes here +[ -s "${PKG_POSTREMOVE_LOCAL}" ] && . ${PKG_POSTREMOVE_LOCAL} + +cat >> postremove << _EOF +exit 0 +_EOF + +## Build request file +echo "Building request file..." +cat > request << _EOF +trap 'exit 3' 15 + +_EOF + +[ -x /usr/bin/ckyorn ] || cat >> request << _EOF + +ckyorn() { +# for some strange reason OpenServer has no ckyorn +# We build a striped down version here + +DEFAULT=n +PROMPT="Yes or No [yes,no,?,quit]" +HELP_PROMPT=" Enter y or yes if your answer is yes; n or no if your answer is no." +USAGE="usage: ckyorn [options] +where options may include: + -d default + -h help + -p prompt +" + +if [ \$# != 0 ] +then + while getopts d:p:h: c + do + case \$c in + h) HELP_PROMPT="\$OPTARG" ;; + d) DEFAULT=\$OPTARG ;; + p) PROMPT=\$OPTARG ;; + \\?) echo "\$USAGE" 1>&2 + exit 1 ;; + esac + done + shift \`expr \$OPTIND - 1\` +fi + +while true +do + echo "\${PROMPT}\\c " 1>&2 + read key + [ -z "\$key" ] && key=\$DEFAULT + case \$key in + [n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S]) echo "\${key}\\c" + exit 0 ;; + \\?) echo \$HELP_PROMPT 1>&2 ;; + q|quit) echo "q\\c" 1>&2 + exit 3 ;; + esac +done + +} + +_EOF + +cat >> request << _EOF +USE_SYM_LINKS=no +PRE_INS_STOP=no +POST_INS_START=no +# Use symbolic links? +ans=\`ckyorn -d n \ +-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$? +case \$ans in + [y,Y]*) USE_SYM_LINKS=yes ;; +esac + +# determine if should restart the daemon +if [ -s ${piddir}/sshd.pid -a -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ] +then + ans=\`ckyorn -d n \ +-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$? + case \$ans in + [y,Y]*) PRE_INS_STOP=yes + POST_INS_START=yes + ;; + esac + +else + +# determine if we should start sshd + ans=\`ckyorn -d n \ +-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$? + case \$ans in + [y,Y]*) POST_INS_START=yes ;; + esac +fi + +# make parameters available to installation service, +# and so to any other packaging scripts +cat >\$1 <<! +USE_SYM_LINKS='\$USE_SYM_LINKS' +PRE_INS_STOP='\$PRE_INS_STOP' +POST_INS_START='\$POST_INS_START' +! + +_EOF + +# local request changes here +[ -s "${PKG_REQUEST_LOCAL}" ] && . ${PKG_REQUEST_LOCAL} + +cat >> request << _EOF +exit 0 + +_EOF + +## Next Build our prototype +echo "Building prototype file..." +cat >mk-proto.awk << _EOF + BEGIN { print "i pkginfo"; print "i depend"; \\ + print "i preinstall"; print "i postinstall"; \\ + print "i preremove"; print "i postremove"; \\ + print "i request"; print "i space"; \\ + split("$SYSTEM_DIR",sys_files); } + { + for (dir in sys_files) { if ( \$3 != sys_files[dir] ) + { if ( \$1 == "s" ) + { \$5=""; \$6=""; } + else + { \$5="root"; \$6="sys"; } + } + else + { \$4="?"; \$5="?"; \$6="?"; break;} + } } + { print; } +_EOF + +find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \ + pkgproto $PROTO_ARGS | nawk -f mk-proto.awk > prototype + +# /usr/local is a symlink on some systems +[ "${USR_LOCAL_IS_SYMLINK}" = yes ] && { + grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new + mv prototype.new prototype +} + +## Step back a directory and now build the package. +cd .. +# local prototype tweeks here +[ -s "${POST_PROTOTYPE_EDITS}" ] && . ${POST_PROTOTYPE_EDITS} + +echo "Building package.." +pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o +echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION-$UNAME_S-$ARCH.pkg + ;; + + justpkg.sh) +rm -fr ${FAKE_ROOT}/${PKGNAME} +grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp +mv $$tmp $FAKE_ROOT/pkginfo +cat >> $FAKE_ROOT/pkginfo << _EOF +PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`" +_EOF +pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o +echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION-$UNAME_S-$ARCH.pkg + ;; + +esac + +[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ] && rm -rf $FAKE_ROOT + |