blob: 427007c3a01d6fabe1be84ae8ab3cefe5b946ea8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
|
===============
XClarity driver
===============
Overview
========
The ``xclarity`` driver is targeted for IMM 2.0 and IMM 3.0 managed Lenovo
servers. The xclarity hardware type enables the user to take advantage of
`XClarity Manager`_ by using the `XClarity Python Client`_.
Prerequisites
=============
* The XClarity Client library should be installed on the ironic conductor
node(s).
For example, it can be installed with ``pip``::
sudo pip install python-xclarityclient
Enabling the XClarity driver
============================
#. Add ``xclarity`` to the list of ``enabled_hardware_types``,
``enabled_power_interfaces`` and ``enabled_management_interfaces``
in ``/etc/ironic/ironic.conf``. For example::
[DEFAULT]
...
enabled_hardware_types = ipmi,xclarity
enabled_power_interfaces = ipmitool,xclarity
enabled_management_interfaces = ipmitool,xclarity
#. Restart the ironic conductor service::
sudo service ironic-conductor restart
# Or, for RDO:
sudo systemctl restart openstack-ironic-conductor
Registering a node with the XClarity driver
===========================================
Nodes configured to use the driver should have the ``driver`` property
set to ``xclarity``.
The following properties are specified in the node's ``driver_info``
field and are required:
- ``xclarity_manager_ip``: The IP address of the XClarity Controller.
- ``xclarity_username``: User account with admin/server-profile access
privilege to the XClarity Controller.
- ``xclarity_password``: User account password corresponding to the
xclarity_username to the XClarity Controller.
- ``xclarity_hardware_id``: The hardware ID of the XClarity managed server.
The ``baremetal node create`` command can be used to enroll
a node with the ``xclarity`` driver. For example:
.. code-block:: bash
baremetal node create --driver xclarity \
--driver-info xclarity_manager_ip=https://10.240.217.101 \
--driver-info xclarity_username=admin \
--driver-info xclarity_password=password \
--driver-info xclarity_hardware_id=hardware_id
For more information about enrolling nodes see :ref:`enrollment`
in the install guide.
.. _`XClarity Manager`: http://www3.lenovo.com/us/en/data-center/software/systems-management/xclarity/
.. _`XClarity Python Client`: http://pypi.org/project/python-xclarityclient/
|
