path: root/integration/scripts/trovestack

#!/usr/bin/env bash
###############################################################################
# Trove Stack Builder, the Trove Dev Machine Controller                       #
###############################################################################
#                                                                             #
# This script provides all the functionality to run all the steps from        #
# setting up the environment, resetting the nova database to running the      #
# test.                                                                       #
#                                                                             #
###############################################################################

SCRIPT_DIRNAME=$(dirname "$0")
PATH_TROVE=${PATH_TROVE:=$(readlink -f "${SCRIPT_DIRNAME}"/../..)}
TROVESTACK_SCRIPTS=${TROVESTACK_SCRIPTS:=$(readlink -f "${SCRIPT_DIRNAME}")}
TROVESTACK_TESTS=$TROVESTACK_SCRIPTS/../tests/
DEFAULT_LOCAL_CONF=local.conf.rc
DEFAULT_LOCALRC=localrc.rc
LOCAL_CONF=local.conf
LOCALRC=localrc
LOCALRC_AUTO=.localrc.auto
USER_LOCAL_CONF_NAME=.devstack.$LOCAL_CONF
CLOUD_ADMIN_ARG="--os-cloud=devstack-admin"

# Make sure we're not affected by the local environment
# by unsetting all the 'OS_' variables
while read -r ENV_VAR; do unset "${ENV_VAR}"; done < <(env|grep "OS_"|awk -F= '{print $1}')

# Now grab the admin credentials from devstack if it's set up.
# This is to facilitate setting the ADMIN_PASSWORD correctly
# for gate runs.
if [ -f $DEST/devstack/accrc/admin/admin ]; then
    source $DEST/devstack/accrc/admin/admin
fi

USERHOME=$HOME
# Load options not checked into VCS.
if [ -f $USERHOME/.trovestack.options.rc ]; then
    . $USERHOME/.trovestack.options.rc
fi
if [ -f $TROVESTACK_SCRIPTS/options.rc ]; then
    . $TROVESTACK_SCRIPTS/options.rc
fi

# NOTE(mriedem): The gate-trove-functional-dsvm-* job config in project-config
# sets this value for Jenkins runs.
BRANCH_OVERRIDE=${BRANCH_OVERRIDE:-default}
if [[ $BRANCH_OVERRIDE == "default" && $OVERRIDE_ZUUL_BRANCH != "master" ]]; then
    BRANCH_OVERRIDE=$OVERRIDE_ZUUL_BRANCH
fi

# Bail on errors.
set -e

# Get default host ip from interface
function get_default_host_ip() {
    host_iface=$(ip route | grep default | awk '{print $5}' | head -1)
    echo `LC_ALL=C ip -f inet addr show ${host_iface} | awk '/inet/ {split($2,parts,"/");  print parts[1]}' | head -1`
}

# Load functions devstack style
. $TROVESTACK_SCRIPTS/functions
. $TROVESTACK_SCRIPTS/functions_qemu

# Pre-set DISTRO and RELEASE variables based on host OS
# Can be overridden by env vars DISTRO and RELEASE
GetDistro
export DISTRO=${DISTRO:-$DISTRO_NAME}
export RELEASE=${RELEASE:-$DISTRO_RELEASE}

# Load global configuration variables.
. $TROVESTACK_SCRIPTS/trovestack.rc
. $TROVESTACK_SCRIPTS/reviews.rc

# allow overrides from devstack if already set
[[ -f $PATH_DEVSTACK_SRC/functions-common ]] && source $PATH_DEVSTACK_SRC/functions-common
[[ -f $PATH_DEVSTACK_SRC/functions ]] && source $PATH_DEVSTACK_SRC/functions

# Set up variables for the CONF files - this has to happen after loading trovestack.rc, since
# TROVE_CONF_DIR is defined there - these will be used by devstack too
export TROVE_CONF=$TROVE_CONF_DIR/trove.conf
export TROVE_TASKMANAGER_CONF=$TROVE_CONF_DIR/trove-taskmanager.conf
export TROVE_CONDUCTOR_CONF=$TROVE_CONF_DIR/trove-conductor.conf
export TROVE_GUESTAGENT_CONF=$TROVE_CONF_DIR/trove-guestagent.conf
export TROVE_API_PASTE_INI=$TROVE_CONF_DIR/api-paste.ini
export TEST_CONF=$TROVE_CONF_DIR/test.conf

# Public facing bits
SERVICE_PROTOCOL=${SERVICE_PROTOCOL:-http}
NETWORK_INTERFACE=${NETWORK_INTERFACE:-eth0}
NETWORK_SUBNET=${NETWORK_SUBNET:-10.0.0.0/24}
NETWORK_GATEWAY=${NETWORK_GATEWAY:-10.0.0.1}
BRIDGE_IP=${BRIDGE_IP:-172.24.4.1}
KEYSTONE_AUTH_HOST=${KEYSTONE_AUTH_HOST:-$SERVICE_HOST}
KEYSTONE_AUTH_PROTOCOL=${KEYSTONE_AUTH_PROTOCOL:-$SERVICE_PROTOCOL}
KEYSTONE_AUTH_PORT=${KEYSTONE_AUTH_PORT:-35357}
GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-$SERVICE_HOST:9292}
GLANCE_SERVICE_PROTOCOL=${GLANCE_SERVICE_PROTOCOL:-http}

# The following depends on whether neutron is used or nova-network
# neutron uses a bridge, nova-network does not
[[ $ENABLE_NEUTRON = true ]] && CONTROLLER_IP=$BRIDGE_IP || CONTROLLER_IP=$NETWORK_GATEWAY

# PATH_TROVE more than likely has file separators, which sed does not like
# This will escape them
ESCAPED_PATH_TROVE=$(echo $PATH_TROVE | sed 's/\//\\\//g')
ESCAPED_TROVESTACK_SCRIPTS=$(echo $TROVESTACK_SCRIPTS | sed 's/\//\\\//g')
TROVE_AUTH_CACHE_DIR=${TROVE_AUTH_CACHE_DIR:-/var/cache/trove}
TROVE_LOGDIR=${TROVE_LOGDIR:-$DEST/logs}
TROVE_DEVSTACK_SETTINGS="$DEST/trove/devstack/settings"
TROVE_DEVSTACK_PLUGIN="$DEST/trove/devstack/plugin.sh"
# DATASTORE_PKG_LOCATION defines the location from where the datastore packages
# can be accessed by the DIB elements. This is applicable only for datastores
# that do not have a public repository from where their packages can be accessed.
# This can either be a url to a private repository or a location on the local
# filesystem that contains the datastore packages.
DATASTORE_PKG_LOCATION=${DATASTORE_PKG_LOCATION:-}

# Support entry points installation of console scripts
if [[ -d $PATH_TROVE/bin ]]; then
    TROVE_BIN_DIR=$PATH_TROVE/bin
else
    TROVE_BIN_DIR=$(get_python_exec_prefix)
fi

# set up respective package managers
if is_fedora; then
    PKG_INSTALL_OPTS=""
    PKG_MGR=dnf
    PKG_GET_ARGS="-y"
else
    PKG_INSTALL_OPTS="DEBIAN_FRONTEND=noninteractive"
    PKG_MGR=apt-get
    PKG_GET_ARGS="-y --allow-unauthenticated --force-yes"
fi
PKG_INSTALL_ARG="install"
PKG_UPDATE_ARG="update"

###############################################################################
# Utility functions
###############################################################################

# Colors that can be used in 'exclaim'
COLOR_RED='\033[0;31m'
COLOR_GREEN='\033[0;32m'
COLOR_BLUE='\033[0;34m'
COLOR_NONE='\033[0m'

function exclaim () {
    echo "*******************************************************************************"
    echo -e "$@"
    echo "*******************************************************************************"
}

function pkg_install () {
    echo Installing $@...
    sudo -E $PKG_INSTALL_OPTS $HTTP_PROXY $PKG_MGR $PKG_GET_ARGS $PKG_INSTALL_ARG $@
}

function pkg_update () {
    echo Updating $@...
    sudo -E $PKG_INSTALL_OPTS $HTTP_PROXY $PKG_MGR $PKG_GET_ARGS $PKG_UPDATE_ARG $@
}

function set_http_proxy() {
    if [ ! "${http_proxy}" = '' ]; then
        HTTP_PROXY="http_proxy=$http_proxy https_proxy=$https_proxy"
    fi
}

function get_ip_for_device() {
    /sbin/ifconfig $1 | awk '/inet addr/{gsub(/addr:/,"");print $2}'
}

function ip_chunk() {
    # Given 1-4 returns a bit of where the ip range starts.
    # Full IP= `ip_chunk 1`.`ip_chunk 2`.`ip_chunk 3`.`ip_chunk 4`
    get_ip_for_device $1 | cut -d. -f$2
}

function dump_env() {
    # Print out the environment for debug purposes
    if [[ -n ${TROVESTACK_DUMP_ENV} ]]; then
        set +e
        exclaim "Dumping configuration, starting with env vars:"
        env | sort
        CLOUDS_YAML=${CLOUDS_YAML:-/etc/openstack/clouds.yaml}
        for filename in "${TEST_CONF}" "${CLOUDS_YAML}" "${TROVE_CONF}" "${PATH_DEVSTACK_SRC}/${LOCALRC}" "${PATH_DEVSTACK_SRC}/${LOCALRC_AUTO}"; do
            if [[ -f ${filename} ]]; then
                exclaim "Dumping contents of '${filename}':"
                cat ${filename}
            else
                exclaim "File '${filename}' not found"
            fi
        done
        exclaim "Dumping pip modules:"
        pip freeze | sort
        exclaim "Dumping domain list:"
        openstack --os-cloud=devstack-admin domain list
        exclaim "Dumping configuration completed"
        set -e
    fi
}

# Add a flavor and a corresponding flavor.resize
# (flavor.resize adds 16 to the memory and one more vcpu)
function add_flavor() {
    local FLAVOR_NAME=$1
    local FLAVOR_ID=$2
    local FLAVOR_MEMORY_MB=$3
    local FLAVOR_ROOT_GB=$4
    local FLAVOR_VCPUS=$5
    local FLAVOR_SKIP_RESIZE=${6:-""}

    if [[ -z "$FLAVOR_LIST_FOR_ADD" ]]; then
        FLAVOR_LIST_FOR_ADD=$(openstack $CLOUD_ADMIN_ARG flavor list | cut -d'|' -f3 | sed -e's/ /,/g')
    fi

    base_id=${FLAVOR_ID}
    base_name_prefix=test
    ephemeral_name_prefix=${base_name_prefix}.eph
    for name_prefix in $base_name_prefix $ephemeral_name_prefix; do
        reg_name=${name_prefix}.${FLAVOR_NAME}-${FLAVOR_ROOT_GB}
        resize_name=${reg_name}.resize
        ephemeral=0
        if [[ $name_prefix == $ephemeral_name_prefix ]]; then
            ephemeral=1
        fi
        for name in ${reg_name} ${resize_name}; do
            id=$base_id
            memory=${FLAVOR_MEMORY_MB}
            vcpus=${FLAVOR_VCPUS}
            if [[ $ephemeral != 0 ]]; then
                id=${id}e
            fi
            if [[ $name == ${resize_name} ]]; then
                id=${id}r
                memory=$((${FLAVOR_MEMORY_MB} + 16))
                vcpus=$((${FLAVOR_VCPUS} + 1))
            fi
            if [[ $FLAVOR_LIST_FOR_ADD != *",$name,"* ]]; then
                if [[ -z ${FLAVOR_SKIP_RESIZE} || ${name} == ${reg_name} ]]; then
                    openstack $CLOUD_ADMIN_ARG flavor create $name --id $id --ram $memory --disk $FLAVOR_ROOT_GB --vcpus $vcpus --ephemeral $ephemeral
                fi
            fi
        done
    done
}

function get_attribute_id() {
    openstack --os-cloud=devstack-admin $1 list | grep " $2" | get_field $3
}


###############################################################################
# Install all the required dependencies
###############################################################################

function install_prep_packages() {
    # Called before devstack
    exclaim 'Updating dependencies (part 1a)...'
    pkg_update
    exclaim 'Installing dependencies (part 1b)...'
    pkg_install python-pip
    if is_fedora; then
      pkg_install git gettext
    else
      #pkg_install git-core kvm-ipxe gettext
      pkg_install git-core gettext
    fi
    sudo -H $HTTP_PROXY pip install --upgrade pip dib-utils
}

function install_devstack_code() {
    exclaim "Installing devstack..."
    # Installs devstack (if needed).
    if [ ! -d $PATH_DEVSTACK_SRC ]; then
        echo "DevStack not in a shared folder, cloning from git."
        mkdir -p $PATH_DEVSTACK_SRC
        git clone $DEVSTACK_REPO $PATH_DEVSTACK_SRC
    fi

    source $PATH_DEVSTACK_SRC/functions-common
    source $PATH_DEVSTACK_SRC/functions

    # Switch to a branch if specified.  The order the variables are checked is:
    # DEVSTACK_BRANCH then PROJECT_BRANCH
    BRANCH_SPECIFIED=$(test -z "${DEVSTACK_BRANCH}${PROJECT_BRANCH}" || echo 'True')
    if [[ "${BRANCH_SPECIFIED}" = "True" ]]; then
        PROJ_BRANCH=$(get_project_branch DEVSTACK_BRANCH $PROJECT_BRANCH)
        ENV_VARS="DEVSTACK_BRANCH' or 'PROJECT_BRANCH"
        git_checkout "devstack" "$PATH_DEVSTACK_SRC" "$PROJ_BRANCH" "$ENV_VARS"
    fi

    exclaim "Installing devstack projects..."
    # Ensures present user can get to the devstack dirs
    sudo mkdir -p $PATH_DEVSTACK_OUTPUT
    if [ ! -w $PATH_DEVSTACK_OUTPUT ]; then
        sudo chown `whoami` $PATH_DEVSTACK_OUTPUT
    fi
    # Clones all of the code to where devstack expects it to be
    pushd $PATH_DEVSTACK_OUTPUT
    cmd_clone_projects do_not_force_update $TROVESTACK_SCRIPTS/projects-list \
        $TROVESTACK_SCRIPTS/image-projects-list
    popd
}

function install_reviews_on_top_of_devstack() {
    exclaim "Putting gerrit review code on top of the existing devstack code"
    run_review_for nova $PATH_NOVA $REVIEW_NOVA
    run_review_for python-novaclient $PATH_PYTHON_NOVACLIENT $REVIEW_PYTHON_NOVACLIENT
    run_review_for keystone $PATH_KEYSTONE $REVIEW_KEYSTONE
    run_review_for python-keystoneclient $PATH_KEYSTONECLIENT $REVIEW_PYTHON_KEYSTONECLIENT
    run_review_for python-openstackclient $PATH_OPENSTACKCLIENT $REVIEW_PYTHON_OPENSTACKCLIENT
    run_review_for glance $PATH_GLANCE $REVIEW_GLANCE
    run_review_for swift $PATH_SWIFT $REVIEW_SWIFT
    run_review_for python-swiftclient $PATH_PYTHON_SWIFTCLIENT $REVIEW_PYTHON_SWIFTCLIENT
    run_review_for trove $PATH_TROVE $REVIEW_TROVE
    run_review_for python-troveclient $PATH_PYTHON_TROVECLIENT $REVIEW_PYTHON_TROVECLIENT
}

function run_review_for() {
    # Splits based on colon in the REVIEW_ARG and pulls from
    GIT_NAME=$1
    PATH_ARG=$2
    REVIEW_ARG=$3
    for review in `echo $REVIEW_ARG| tr ":" "\n"`
    do
        # This should be the ref spec for what we pull
        pushd $PATH_ARG
        git_timed pull https://review.openstack.org/p/openstack/$GIT_NAME refs/changes/$review
        popd
    done
}

function fixup_broken_devstack() {
    # Nothing to do here, devstack is working
    :
}

# Delete all the lines from FILE_NAME between START_TAG and END_TAG
# Tags must appear at the beginning of a line
function clear_file_lines() {
    local FILE_NAME=$1
    local START_TAG=$2
    local END_TAG=$3

    sed -i "/^$START_TAG$/,/^$END_TAG$/{/^$START_TAG/!{/^$END_TAG/!d;}}" "$FILE_NAME"
}

# Checks to see if a variable with the same name as FILE_NAME exists.
# Returns 'true' if no varable exists or if the value of the variable
# is set to 'true' - returns the VAR_NAME to set otherwise.
# FILE_NAME is first converted to uppercase, the extension is removed
# and all remaining '.' and spaces are replaced with '_'
function check_filename_var() {
    local FILE_NAME=$1

    DEREF_VALUE=false
    if [ -f "$FILE_NAME" ]; then
        VAR_NAME=$(basename "$FILE_NAME" ".rc" | tr '[:lower:][:blank:][:punct:]' '[:upper:]__')
        DEREF_VALUE=$(get_bool "$VAR_NAME" "true")
        if [ "$DEREF_VALUE" != "true" ]; then
            DEREF_VALUE=$VAR_NAME
        fi
    fi
    echo "$DEREF_VALUE"
}

# Add the contents of one file to another, after the given tag
# Run through 'eval' if PARSE_FILE is true (defaults to true)
# Start with a blank line if BLANK_LINE_TO_START is true (defaults to false)
function add_file_contents() {
    local FILE_NAME=$1
    local FILE_TO_ADD=$2
    local TAG=$3
    local PARSE_FILE=${4:-true}
    local BLANK_LINE_TO_START=${5:-false}

    TEMP_FILE=".trovestack.$$"
    rm -f "$TEMP_FILE"
    if [ "$BLANK_LINE_TO_START" = "true" ]; then
        echo "" > "$TEMP_FILE"
    fi
    if [ -f "$FILE_TO_ADD" ]; then
        echo "Adding $FILE_TO_ADD to $FILE_NAME"
        echo "# Contents from $FILE_TO_ADD" >> "$TEMP_FILE"
        if [ "$PARSE_FILE" = "true" ]; then
            eval echo "\"$(cat "$FILE_TO_ADD")\"" >> "$TEMP_FILE"
        else
            cat "$FILE_TO_ADD" >> "$TEMP_FILE"
        fi
        echo "# End Of Contents from $FILE_TO_ADD" >> "$TEMP_FILE"
    fi
    echo "" >> "$TEMP_FILE"
    sed -i "/^$TAG/r $TEMP_FILE" "$FILE_NAME"
    rm -f "$TEMP_FILE"
}

function run_devstack() {
    exclaim "Running devstack..."

    # (Re)Creating this lock directory seems sure-fire.
    rm -rf "$USERHOME/nova_locks"
    mkdir -p "$USERHOME/nova_locks"

    TROVE_PRESENT_TAG="# generated-by-trovestack"
    LOCAL_CONF_D=local.conf.d
    CONF_MATCH="*.rc"
    MARKER_TOKEN="#####"
    USER_LOCAL_CONF=$(readlink -f "${USER_LOCAL_CONF:-$USERHOME/$USER_LOCAL_CONF_NAME}")
    LOCALRC_OPTS_TAG="$MARKER_TOKEN Redstack Localrc Options $MARKER_TOKEN"
    LOCALRC_OPTS_TAG_END="$MARKER_TOKEN End Of Redstack Localrc Options $MARKER_TOKEN"
    USER_OPTS_TAG="$MARKER_TOKEN User Specified Options $MARKER_TOKEN"
    USER_OPTS_TAG_END="$MARKER_TOKEN End Of User Specified Options $MARKER_TOKEN"
    ADD_OPTS_TAG="$MARKER_TOKEN Additional Options $MARKER_TOKEN"
    ADD_OPTS_TAG_END="$MARKER_TOKEN End Of Additional Options $MARKER_TOKEN"

    pushd "$PATH_DEVSTACK_SRC"
    DEVSTACK_LOCAL_CONF=$LOCAL_CONF
    # remain backwards compatible with existing localrc files
    if [ -f "$LOCALRC" ]; then
        DEVSTACK_LOCAL_CONF=$LOCALRC
        echo "Old-style devstack config file $PATH_DEVSTACK_SRC/$DEVSTACK_LOCAL_CONF found."
        echo "Consider removing to generate the preferred-sytle config file $LOCAL_CONF."
    fi
    if [ -f "$DEVSTACK_LOCAL_CONF" ]; then
        # Check if we have already configured the devstack config file
        already_in_conf=$(grep "$TROVE_PRESENT_TAG" "$DEVSTACK_LOCAL_CONF" | wc -l)
        if [ "$already_in_conf" == 0 ]; then
            # We can no longer append to an existing old-style localrc file
            if [ "$DEVSTACK_LOCAL_CONF" == "$LOCALRC" ]; then
                echo "The devstack config file $PATH_DEVSTACK_SRC/$DEVSTACK_LOCAL_CONF is too old to append to."
                echo "Please remove and try again."
                exit 1
            fi
            # Otherwise append the trovestack version to the existing file
            eval echo "\"$(cat "$TROVESTACK_SCRIPTS/$DEFAULT_LOCALRC")\"" >> "$DEVSTACK_LOCAL_CONF"
        fi
    else
        # If a devstack config file doesn't exist, create it
        eval echo "\"$(cat "$TROVESTACK_SCRIPTS/$DEFAULT_LOCAL_CONF")\"" > "$DEVSTACK_LOCAL_CONF"
    fi

    # We can only replace sections from the LOCAL_CONF style files
    if [ "$DEVSTACK_LOCAL_CONF" == "$LOCAL_CONF" ]; then
        # Clear out all the options
        clear_file_lines "$DEVSTACK_LOCAL_CONF" "$LOCALRC_OPTS_TAG" "$LOCALRC_OPTS_TAG_END"
        clear_file_lines "$DEVSTACK_LOCAL_CONF" "$USER_OPTS_TAG" "$USER_OPTS_TAG_END"
        clear_file_lines "$DEVSTACK_LOCAL_CONF" "$ADD_OPTS_TAG" "$ADD_OPTS_TAG_END"

        # Add the main localrc file
        PARSE_FILE="true"
        BLANK_LINE_TO_START="true"
        if [ -f "$TROVESTACK_SCRIPTS/$DEFAULT_LOCALRC" ]; then
            add_file_contents "$DEVSTACK_LOCAL_CONF" "$TROVESTACK_SCRIPTS/$DEFAULT_LOCALRC" "$LOCALRC_OPTS_TAG" "$PARSE_FILE" "$BLANK_LINE_TO_START"
        fi

        # Add any user options
        PARSE_FILE="false"
        BLANK_LINE_TO_START="true"
        if [ -f "$USER_LOCAL_CONF" ]; then
            add_file_contents "$DEVSTACK_LOCAL_CONF" "$USER_LOCAL_CONF" "$USER_OPTS_TAG" "$PARSE_FILE" "$BLANK_LINE_TO_START"
        fi

        # Add all the files in the LOCAL_CONF_D directory that match CONF_MATCH (except for sample files)
        # and that aren't excluded.  Files are excluded by having a variable
        # 'FILENAME_IN_UPPERCASE_MINUS_RC=false' in trovestack.rc
        # For Example: USING_VAGRANT=false (for the using_vagrant.rc file).
        PARSE_FILE="true"
        BLANK_LINE_TO_START="false"
        while IFS= read -r -d '' CONF_FILE
        do
            FILE_NAME_VAR=$(check_filename_var "$CONF_FILE")
            if [ "$FILE_NAME_VAR" = "true" ]; then
                add_file_contents "$DEVSTACK_LOCAL_CONF" "$CONF_FILE" "$ADD_OPTS_TAG" "$PARSE_FILE" "$BLANK_LINE_TO_START"
            else
                echo "Skipping $CONF_FILE"
                echo "Use $FILE_NAME_VAR=true to include"
            fi
        done < <(find "$TROVESTACK_SCRIPTS/${LOCAL_CONF_D}" -name "${CONF_MATCH}" -follow -not -name "sample*.rc" -type f -print0)
        # this is to add a blank line for readability
        add_file_contents "$DEVSTACK_LOCAL_CONF" "" "$ADD_OPTS_TAG"
    fi
    ./stack.sh
    popd
}


function cmd_install() {
    sudo mkdir -p $TROVE_LOGDIR # Creates TROVE_LOGDIR if it does not exist
    if [ ! -w $TROVE_LOGDIR ]; then
        sudo chown `whoami` $TROVE_LOGDIR
    fi
    install_prep_packages
    install_devstack_code
    install_reviews_on_top_of_devstack
    fixup_broken_devstack
    run_devstack
    exclaim "${COLOR_GREEN}FINISHED INSTALL${COLOR_NONE}"
}


###############################################################################
# Build the image
# see functions_qemu
###############################################################################

# Grab a numbered field from python prettytable output
# Fields are numbered starting with 1
# Reverse syntax is supported: -1 is the last field, -2 is second to last, etc.
# get_field field-number
function get_field() {
    while read data; do
        if [ "$1" -lt 0 ]; then
            field="(\$(NF$1))"
        else
            field="\$$(($1 + 1))"
        fi
        echo "$data" | awk -F'[ \t]*\\|[ \t]*' "{print $field}"
    done
}

function get_glance_id () {
    echo `$@ | grep ' id ' | get_field 2`
}

function set_bin_path() {
    if is_fedora; then
       sed -i "s|%bin_path%|/usr/bin|g" $TEST_CONF
    else
       sed -i "s|%bin_path%|/usr/local/bin|g" $TEST_CONF
    fi
}

function set_mysql_pkg() {
    if is_fedora; then
       MYSQL_PKG="mysql-community-server"
    else
       MYSQL_PKG="mysql-server-5.6"
    fi
}


function cmd_set_datastore() {
    local IMAGEID=$1
    local DATASTORE_TYPE=$2
    local RESTART_TROVE=${3:-$(get_bool RESTART_TROVE "true")}

    # rd_manage datastore_update <datastore_name> <default_version>
    rd_manage datastore_update "$DATASTORE_TYPE" ""
    PACKAGES=${PACKAGES:-""}
    if [ "$DATASTORE_TYPE" == "mysql" ]; then
        set_mysql_pkg
        PACKAGES=${PACKAGES:-$MYSQL_PKG}
        VERSION="5.6"
    elif [ "$DATASTORE_TYPE" == "percona" ]; then
        PACKAGES=${PACKAGES:-"percona-server-server-5.6"}
        VERSION="5.6"
    elif [ "$DATASTORE_TYPE" == "pxc" ]; then
        PACKAGES=${PACKAGES:-"percona-xtradb-cluster-server-5.6"}
        VERSION="5.6"
    elif [ "$DATASTORE_TYPE" == "mariadb" ]; then
        PACKAGES=${PACKAGES:-"mariadb-server"}
        VERSION="10.1"
    elif [ "$DATASTORE_TYPE" == "mongodb" ]; then
        PACKAGES=${PACKAGES:-"mongodb-org"}
        VERSION="3.2"
    elif [ "$DATASTORE_TYPE" == "redis" ]; then
        PACKAGES=${PACKAGES:-"redis-server"}
        VERSION="3.0"
    elif [ "$DATASTORE_TYPE" == "cassandra" ]; then
        PACKAGES=${PACKAGES:-"cassandra"}
        VERSION="2.1.0"
    elif [ "$DATASTORE_TYPE" == "couchbase" ]; then
        PACKAGES=${PACKAGES:-"couchbase-server"}
        VERSION="2.2.0"
    elif [ "$DATASTORE_TYPE" == "postgresql" ]; then
        PACKAGES=${PACKAGES:-"postgresql-9.4"}
        VERSION="9.4"
    elif [ "$DATASTORE_TYPE" == "couchdb" ]; then
        PACKAGES=${PACKAGES:-"couchdb"}
        VERSION="1.6.1"
    elif [ "$DATASTORE_TYPE" == "vertica" ]; then
        PACKAGES=${PACKAGES:-"vertica"}
        VERSION="7.1"
    elif [ "$DATASTORE_TYPE" == "db2" ]; then
        PACKAGES=${PACKAGES:-""}
        VERSION="10.5"
    else
        echo "Unrecognized datastore type. ($DATASTORE_TYPE)"
        exit 1
    fi

    sed -i "s/%datastore_type%/$DATASTORE_TYPE/g" $TEST_CONF
    sed -i "s/%datastore_version%/$VERSION/g" $TEST_CONF

    #rd_manage datastore_version_update <datastore_name> <version_name> <datastore_manager> <image_id> <packages> <active>
    rd_manage datastore_version_update "$DATASTORE_TYPE" "$VERSION" "$DATASTORE_TYPE" $IMAGEID "$PACKAGES" 1
    rd_manage datastore_version_update "$DATASTORE_TYPE" "inactive_version" "manager1" $IMAGEID "" 0
    rd_manage datastore_update "$DATASTORE_TYPE" "$VERSION"
    rd_manage datastore_update Test_Datastore_1 ""

    if [ -f "$PATH_TROVE"/trove/templates/$DATASTORE_TYPE/validation-rules.json ]; then
        # add the configuration parameters to the database for the kick-start datastore
        rd_manage db_load_datastore_config_parameters "$DATASTORE_TYPE" "$VERSION" "$PATH_TROVE"/trove/templates/$DATASTORE_TYPE/validation-rules.json
    fi

    if [[ "${RESTART_TROVE}" == true ]]; then
        cmd_stop
    fi
    iniset $TROVE_CONF DEFAULT default_datastore "$DATASTORE_TYPE"
    sleep 1.5
    if [[ "${RESTART_TROVE}" == true ]]; then
        cmd_start
    fi
}

###############################################################################
# Run Unit Tests
###############################################################################

function cmd_unit_tests() {
    exclaim "Running Trove Unit Tests..."
    $PATH_TROVE/run_tests.sh -N
}

###############################################################################
# Start various OpenStack daemons interactively in a screen session
###############################################################################

function cmd_start_deps() {
    if ! sudo vgs $VOLUME_GROUP; then
        exclaim "Reconnecting Volume Group to Backing File"
        sudo losetup -f --show ${VOLUME_BACKING_FILE}
    fi

    if ! egrep -q ${SWIFT_DATA_DIR}/drives/sdb1 /proc/mounts; then
        exclaim "Re-mounting Swift Disk Image"
        sudo mount -t xfs -o loop,noatime,nodiratime,nobarrier,logbufs=8  ${SWIFT_DISK_IMAGE} ${SWIFT_DATA_DIR}/drives/sdb1 || true
    fi

    if [[ -e $PATH_DEVSTACK_SRC/stack-screenrc ]]; then
        screen -dmS stack -c $PATH_DEVSTACK_SRC/stack-screenrc
    fi
}

function cmd_stop_deps() {
    if screen -ls | grep -q stack; then
        screen -S stack -X quit
        rm -f $DEST/status/stack/*
    fi
}


###############################################################################
# Initialize Trove
###############################################################################

function rd_manage() {
    pushd $PATH_TROVE
    $TROVE_BIN_DIR/trove-manage --config-file=$TROVE_CONF "$@"
    popd
}

function install_test_packages() {
    DATASTORE_TYPE=$1

    sudo -H $HTTP_PROXY pip install openstack.nose_plugin proboscis pexpect
    if [ "$DATASTORE_TYPE" = "couchbase" ]; then
        if [ "$DISTRO" == "ubuntu" ]; then
	        # Install Couchbase SDK for scenario tests.
	        sudo -H $HTTP_PROXY curl http://packages.couchbase.com/ubuntu/couchbase.key | sudo apt-key add -
	        echo "deb http://packages.couchbase.com/ubuntu trusty trusty/main" | sudo tee /etc/apt/sources.list.d/couchbase-csdk.list
	        sudo -H $HTTP_PROXY apt-get update
	        sudo -H $HTTP_PROXY apt-get --allow-unauthenticated -y install libcouchbase-dev
	        sudo -H $HTTP_PROXY pip install --upgrade couchbase
        fi
    fi
}

function mod_confs() {
    DATASTORE_TYPE=$1
    exclaim "Running mod_confs ..."

    sudo install -b --mode 0664 $TROVESTACK_SCRIPTS/conf/test_begin.conf $TEST_CONF
    # cmd_dsvm_gate_tests will set this to be $HOME/report
    TROVE_REPORT_DIR=${TROVE_REPORT_DIR:=$TROVESTACK_SCRIPTS/../report/}

    EXTRA_CONF=$TROVESTACK_SCRIPTS/conf/test.extra.conf
    if [ -e $EXTRA_CONF ]; then
        cat $EXTRA_CONF >> $TEST_CONF
    fi
    # Append datastore specific configuration file
    DATASTORE_CONF=$TROVESTACK_SCRIPTS/conf/$DATASTORE_TYPE.conf
    if [ ! -f $DATASTORE_CONF ]; then
        exclaim "Datastore configuration file ${DATASTORE_CONF} not found"
        exit 1
    fi
    cat $DATASTORE_CONF | sudo tee -a $TEST_CONF > /dev/null
    cat $TROVESTACK_SCRIPTS/conf/test_end.conf | sudo tee -a $TEST_CONF > /dev/null

    #Add the paths to the test conf
    sed -i "s,%report_directory%,$TROVE_REPORT_DIR,g" $TEST_CONF
    sed -i "s,%keystone_path%,$PATH_KEYSTONE,g" $TEST_CONF
    sed -i "s,%nova_path%,$PATH_NOVA,g" $TEST_CONF
    sed -i "s,%glance_path%,$PATH_GLANCE,g" $TEST_CONF
    sed -i "s,%trove_path%,$PATH_TROVE,g" $TEST_CONF
    sed -i "s,%service_host%,$SERVICE_HOST,g" $TEST_CONF
    sed -i "s,%swifth_path%,$PATH_SWIFT,g" $TEST_CONF

    # Add the region name into test.conf
    sed -i "s/%region_name%/${REGION_NAME}/g" $TEST_CONF

    # Add the tenant id's into test.conf
    sed -i "s/%admin_tenant_id%/$(get_attribute_id project admin 1)/g" $TEST_CONF
    sed -i "s/%alt_demo_tenant_id%/$(get_attribute_id project alt_demo 1)/g" $TEST_CONF
    sed -i "s/%demo_tenant_id%/$(get_attribute_id project demo 1)/g" $TEST_CONF
    sed -i "s/%admin_password%/$ADMIN_PASSWORD/g" $TEST_CONF

    # Enable neutron tests if needed
    sed -i "s/%neutron_enabled%/$ENABLE_NEUTRON/g" $TEST_CONF

    # If neutron is enabled, the devstack plugin will have created an alt_demo
    # network - write this info to the confs so that the integration tests can
    # use it.
    if [[ $ENABLE_NEUTRON = true ]]; then
        TROVE_NET_ID=$(openstack $CLOUD_ADMIN_ARG network list | grep " $TROVE_PRIVATE_NETWORK_NAME " | awk '{print $2}')
        TROVE_SUBNET_ID=$(openstack $CLOUD_ADMIN_ARG subnet list | grep " $TROVE_PRIVATE_SUBNET_NAME " | awk '{print $2}')
        echo "Using network ${TROVE_PRIVATE_NETWORK_NAME} (${TROVE_NET_ID}): ${TROVE_PRIVATE_SUBNET_NAME} (${TROVE_SUBNET_ID})"
        sed -i "s,%shared_network%,$TROVE_NET_ID,g" $TEST_CONF
        sed -i "s,%shared_network_subnet%,$TROVE_SUBNET_ID,g" $TEST_CONF
    else
        # do not leave invalid keys in the configuration when using Nova for networking
        sed -i "/%shared_network%/d" $TEST_CONF
        sed -i "/%shared_network_subnet%/d" $TEST_CONF
    fi

    if [ "$DATASTORE_TYPE" = "vertica" ]; then
        # Vertica needs more time than mysql for its boot/start/stop operations.
        setup_cluster_configs cluster_member_count 3
    elif [ "$DATASTORE_TYPE" = "pxc" ]; then
        setup_cluster_configs min_cluster_member_count 2
    elif [ "$DATASTORE_TYPE" = "cassandra" ]; then
        setup_cluster_configs cluster_member_count 2
    elif [ "$DATASTORE_TYPE" = "mongodb" ]; then
        setup_cluster_configs cluster_member_count 2
        # Decrease the number of required config servers per cluster to save resources.
        iniset $TROVE_CONF $DATASTORE_TYPE num_config_servers_per_cluster 1
    fi

    set_bin_path

}

function setup_cluster_configs() {
    # Setting cluster_member_count to 2 to decrease cluster spawn time.
    iniset $TROVE_CONF $DATASTORE_TYPE $1 $2
}

# Add useful flavors for testing (with corresponding *.resize flavors)
function add_test_flavors() {
    # name id ram root_vol vcpu
    # the ram and vcpu for name.resize are automatically calculated
    # eph and non-eph flavors are created for each entry
    add_flavor 'tiny' 10 512 3 1

    add_flavor 'small' 15 768 3 1
    add_flavor 'small' 16 768 4 1
    add_flavor 'small' 17 768 5 1

    add_flavor 'medium' 20 1024 4 1
    add_flavor 'medium' 21 1024 5 1

    add_flavor 'large' 25 2048 5 1
    add_flavor 'large' 26 2048 10 1
    add_flavor 'large' 27 2048 15 1

    # This will allow Nova to create an instance, but not enough disk to boot the image
    add_flavor 'fault_1' 30 512 1 1 'skip_resize'
    # This should be enough memory to cause Nova to fail entirely due to too much allocation
    add_flavor 'fault_2' 31 131072 5 1 'skip_resize'
}

function cmd_test_init() {
    local DATASTORE_TYPE=$1

    if [ -z "${DATASTORE_TYPE}" ]; then
        exclaim "${COLOR_RED}Datastore argument was not specified.${COLOR_NONE}"
        exit 1
    fi

    exclaim 'Initializing Configuration for Running Tests...'

    exclaim "Installing python test packages."
    install_test_packages "${DATASTORE_TYPE}"

    exclaim "Modifying test.conf and guest.conf with appropriate values."
    mod_confs "${DATASTORE_TYPE}"

    exclaim "Creating Test Flavors."
    add_test_flavors

    if [[ -n $KEY_DIR ]]; then
        exclaim "Installing the SSH key from $KEY_DIR to the test environment."
        mkdir -m 700 -p $USERHOME/.ssh
        install -b --mode 0400 $KEY_DIR/id_rsa $USERHOME/.ssh
        cat $KEY_DIR/authorized_keys >> $USERHOME/.ssh/authorized_keys
        chmod 600 $USERHOME/.ssh/authorized_keys
    fi
}

function cmd_build_image() {
    local IMAGE_DATASTORE_TYPE=${1:-'mysql'}
    local ESCAPED_PATH_TROVE=${2:-'\/opt\/stack\/trove'}
    local HOST_SCP_USERNAME=${3:-'ubuntu'}
    local GUEST_USERNAME=${4:-'ubuntu'}

    exclaim "Ensuring we have all packages needed to build image."
    sudo $HTTP_PROXY $PKG_MGR $PKG_GET_ARGS update
    sudo $HTTP_PROXY $PKG_MGR $PKG_GET_ARGS install qemu
    sudo -H $HTTP_PROXY pip install --upgrade pip dib-utils
    pkg_install python-yaml

    install_devstack_code

    cmd_clone_projects do_not_force_update $TROVESTACK_SCRIPTS/image-projects-list

    exclaim "Use tripleo-diskimagebuilder to actually build the Trove Guest Agent Image."
    build_guest_image $IMAGE_DATASTORE_TYPE
}

function cmd_build_and_upload_image() {
    local DATASTORE_TYPE=$1
    local RESTART_TROVE=${2:-$(get_bool RESTART_TROVE "true")}

    if [ -z "${DATASTORE_TYPE}" ]; then
        exclaim "${COLOR_RED}Datastore argument was not specified.${COLOR_NONE}"
        exit 1
    fi

    local IMAGE_URL=""
    # Use /tmp as file_cache
    FILES=/tmp
    if [[ -n $IMAGE_DOWNLOAD_URL ]]; then
        exclaim "Downloading and using cached image"
        IMAGE_URL=$IMAGE_DOWNLOAD_URL
    else
        exclaim "Trying to build image"
        build_guest_image "${DATASTORE_TYPE}"
        QCOW_IMAGE=`find $VM_PATH -name '*.qcow2'`
        IMAGE_URL="file://$QCOW_IMAGE"
    fi

    GLANCE_IMAGEIDS=$(openstack $CLOUD_ADMIN_ARG image list | grep $(basename $IMAGE_URL .qcow2) | get_field 1)
    if [[ -n $GLANCE_IMAGEIDS ]]; then
        openstack $CLOUD_ADMIN_ARG image delete $GLANCE_IMAGEIDS
    fi
    GLANCE_IMAGEID=`get_glance_id upload_image $IMAGE_URL`
    [[ -z "$GLANCE_IMAGEID" ]] && echo "Glance upload failed!" && exit 1
    echo "IMAGE ID: $GLANCE_IMAGEID"

    exclaim "Updating Datastores"
    cmd_set_datastore "${GLANCE_IMAGEID}" "${DATASTORE_TYPE}" "${RESTART_TROVE}"
}


function cmd_initialize() {
    exclaim '(Re)Initializing Trove...'
    pushd $PATH_DEVSTACK_SRC
    ./unstack.sh
    ./stack.sh
    popd
}


###############################################################################
# Start Trove specific daemons interactively in a screen session
###############################################################################

function tr_screen_it {
    if screen -ls | grep -q stack; then
        echo "Starting $@..."
        screen -S stack -p $1 -X stuff "$2"$'\015'
    fi
}

function init_fake_mode() {
    # Create a test conf which, unlike the conf which runs on a user's machine,
    # takes advantage of the running keystone service we have in our VM.
    # You could think of this fake mode, which runs in the VM as being
    # slightly less fake than the default one which runs outside of it.
    CONF_FILE=/tmp/trove.conf.test
    cp $PATH_TROVE/etc/trove/trove.conf.test $CONF_FILE
    # Switch keystone from the fake class to the real one.
    sed -i \
        "s/trove.tests.fakes.keystone/keystone.middleware.auth_token/g" \
        $CONF_FILE
    sed -i "s/log_file = rdtest.log//g" $CONF_FILE
    sed -i "s/use_stderr = False/use_stderr = True/g" $CONF_FILE
    cd $PATH_TROVE
    set -e
    rm -f trove_test.sqlite
    set +e
    $TROVE_BIN_DIR/trove-manage --config-file=$CONF_FILE db_sync
    sqlite3 trove_test.sqlite \
        "INSERT INTO datastores VALUES ('a00000a0-00a0-0a00-00a0-000a000000aa', \
            'mysql', 'b00000b0-00b0-0b00-00b0-000b000000bb'); \
         INSERT INTO datastores values ('e00000e0-00e0-0e00-00e0-000e000000ee', \
            'Test_Datastore_1', ''); \
         INSERT INTO datastore_versions VALUES ('b00000b0-00b0-0b00-00b0-000b000000bb', \
            'a00000a0-00a0-0a00-00a0-000a000000aa', '5.6', \
            'c00000c0-00c0-0c00-00c0-000c000000cc', $MYSQL_PKG, 1, 'mysql'); \
         INSERT INTO datastore_versions VALUES ('d00000d0-00d0-0d00-00d0-000d000000dd', \
            'a00000a0-00a0-0a00-00a0-000a000000aa', 'inactive_version', \
            '', '', 0, 'manager1'); \
        INSERT INTO datastore_configuration_parameters VALUES \
            ('00000000-0000-0000-0000-000000000001', \
            'key_buffer_size', 'b00000b0-00b0-0b00-00b0-000b000000bb', \
            0, 4294967296, 0, 'integer', 0, NULL); \
        INSERT INTO datastore_configuration_parameters VALUES \
            ('00000000-0000-0000-0000-000000000002', \
            'connect_timeout', 'b00000b0-00b0-0b00-00b0-000b000000bb', \
            0, 65535, 1, 'integer', 0, NULL); \
        INSERT INTO datastore_configuration_parameters VALUES \
            ('00000000-0000-0000-0000-000000000003', \
            'join_buffer_size', 'b00000b0-00b0-0b00-00b0-000b000000bb', \
            0, 4294967296, 0, 'integer', 0, NULL); \
        INSERT INTO datastore_configuration_parameters VALUES \
            ('00000000-0000-0000-0000-000000000004', \
            'local_infile', 'b00000b0-00b0-0b00-00b0-000b000000bb', \
            0, 1, 0, 'integer', 0, NULL); \
        INSERT INTO datastore_configuration_parameters VALUES \
            ('00000000-0000-0000-0000-000000000005', \
            'collation_server', 'b00000b0-00b0-0b00-00b0-000b000000bb', \
            0, NULL, NULL, 'string', 0, NULL); \
        "
}

function cmd_start() {
    if screen -ls | grep -q stack; then
        USE_SCREEN=True
        TOP_DIR=$PATH_DEVSTACK_SRC
        LOGDIR=$TROVE_LOGDIR
        RUNNING=$(screen -S stack -Q windows)
        if [[ "$RUNNING" =~ " tr-" ]]; then
            exclaim "${COLOR_RED}WARNING: Trove services appear to be running. Please run 'stop' or 'restart'${COLOR_NONE}"
        else
            source "$TROVE_DEVSTACK_SETTINGS"
            source /dev/stdin < <(sed -n '/^function start_trove\(\)/,/^}/p' "$TROVE_DEVSTACK_PLUGIN")
            start_trove
        fi
    else
        echo "WARNING: Could not start Trove services because there is no stack screen session running"
    fi
}

function cmd_start_fake() {
    init_fake_mode
    CONF_FILE=/tmp/trove.conf.test
    tr_screen_it tr-fake "cd $PATH_TROVE; $TROVE_BIN_DIR/trove-fake-mode --config-file=$CONF_FILE $@"
}

function cmd_run() {
    cd $PATH_TROVE; $TROVE_BIN_DIR/trove-api \
        --config-file=$TROVE_CONF $@
}

function cmd_run_fake() {
    init_fake_mode
    CONF_FILE=/tmp/trove.conf.test
    $TROVE_BIN_DIR/trove-fake-mode --config-file=$CONF_FILE $@
}

###############################################################################
# Stop any active Trove screen session
###############################################################################

function cmd_stop() {
    if screen -ls | grep -q stack; then
        rm -f $DEST/status/stack/tr-*
        USE_SCREEN=True
        source "$TROVE_DEVSTACK_SETTINGS"
        source /dev/stdin < <(sed -n '/^function stop_trove\(\)/,/^}/p' "$TROVE_DEVSTACK_PLUGIN")
        MAX_RETRY=5
        COUNT=1
        while true; do
            RUNNING=$(screen -S stack -Q windows)
            if [[ "$RUNNING" =~ " tr-" ]]; then
                stop_trove
            else
                break
            fi
            ((COUNT++))
            if [ "$COUNT" -gt "$MAX_RETRY" ]; then
                exclaim "${COLOR_RED}WARNING: Could not stop Trove services after ${MAX_RETRY} attempts${COLOR_NONE}"
                break
            fi
        done
    else
        echo "WARNING: Could not stop Trove services because there is no stack screen session running"
    fi
}


###############################################################################
# Run Integration Tests
###############################################################################

function cmd_int_tests() {
    exclaim "Running Trove Integration Tests..."
    if [ ! $USAGE_ENDPOINT ]; then
        export USAGE_ENDPOINT=trove.tests.util.usage.FakeVerifier
    fi
    cd $TROVESTACK_SCRIPTS
    if [ $# -lt 1 ]; then
        args="--group=blackbox"
    else
        args="$@"
    fi

    dump_env
    # -- verbose makes it prettier.
    # -- logging-clear-handlers keeps the novaclient and other things from
    #    spewing logs to stdout.
    args="$INT_TEST_OPTIONS -B $TROVESTACK_TESTS/integration/int_tests.py --verbose --logging-clear-handlers $args"
    echo "Running: python $args"
    python $args
}

function cmd_int_tests_simple() {
    exclaim "Running Trove Simple Integration Tests..."
    cd $TROVESTACK_SCRIPTS
    if [ $# -lt 1 ]; then
        args="--group=simple_blackbox"
    else
        args="$@"
    fi

    # -- verbose makes it prettier.
    # -- logging-clear-handlers keeps the novaclient and other things from
    #    spewing logs to stdout.
    args="$INT_TEST_OPTIONS -B $TROVESTACK_TESTS/integration/int_tests.py --verbose --logging-clear-handlers $args"
    echo "python $args"
    python $args
}

function cmd_int_tests_white_box() {
    export PYTHONPATH=$PYTHONPATH:$PATH_TROVE
    export PYTHONPATH=$PYTHONPATH:$PATH_NOVA
    cmd_int_tests --test-config white_box=True \
        --config-file=$TROVE_CONF \
        --nova-flags=/etc/nova/nova.conf $@
}

function cmd_example_tests() {
    set +e
    cmd_stop
    set -e
    cmd_start_fake
    sleep 3
    echo "
{
    \"directory\": \"$TROVESTACK_TESTS/../apidocs/src/resources/samples/\",
    \"auth_url\":\"http://$KEYSTONE_AUTH_HOST:35357/v2.0/tokens\",
    \"api_url\":\"http://$SERVICE_HOST:8779\",
    \"replace_host\":\"https://ord.databases.api.rackspacecloud.com\",
    \"replace_dns_hostname\": \"e09ad9a3f73309469cf1f43d11e79549caf9acf2.rackspaceclouddb.com\",
    \"username\":\"examples\",
    \"password\":\"examples\",
    \"tenant\":\"trove\"
}" > /tmp/example-tests.conf
    python $TROVESTACK_TESTS/examples/examples/example_generation.py /tmp/example-tests.conf
    pushd $TROVESTACK_TESTS/../apidocs
    mvn clean
    mvn generate-sources
    popd
    cmd_stop
}


###############################################################################
# Misc. tools
###############################################################################

function mysql_nova() {
    echo mysql nova --execute "$@"
    mysql -u root -p$MYSQL_PASSWORD nova --execute "$@"
}

function mysql_trove() {
    echo mysql trove --execute "$@"
    mysql -u root -p$MYSQL_PASSWORD trove --execute "$@"
}

function cmd_wipe_logs() {
    for file in `ls $TROVE_LOGDIR/*.log`
    do
        echo "Reseting log file $file..."
        echo "Reset at `date`" > $file
    done
}

function cmd_rd_sql() {
    mysql -u root -p$MYSQL_PASSWORD trove
}

function cmd_fake_sql() {
    pushd $PATH_TROVE
    sqlite3 trove_test.sqlite $@
    popd
}

function cmd_vagrant_ssh() {
    # Runs a command on a vagrant VM from the host machine.
    VHOST=`vagrant ssh_config host | awk '/HostName/{print $2}'`
    VUSER=`vagrant ssh_config host | awk '/User /{print $2}'`
    VPORT=`vagrant ssh_config host | awk '/Port/{print $2}'`
    VIDFILE=`vagrant ssh_config host | awk '/IdentityFile/{print $2}'`
    echo ssh ${VUSER}@${VHOST} -p ${VPORT} -i ${VIDFILE} -o NoHostAuthenticationForLocalhost=yes "$@"
    ssh ${VUSER}@${VHOST} -p ${VPORT} -i ${VIDFILE} -o NoHostAuthenticationForLocalhost=yes "$@"
}


function cmd_run_ci() {
    local DATASTORE_TYPE=$1
    local RESTART_TROVE=${2:-$(get_bool RESTART_TROVE "true")}

    if [ -z "${DATASTORE_TYPE}" ]; then
        exclaim "${COLOR_RED}Datastore argument was not specified.${COLOR_NONE}"
        exit 1
    fi

    exclaim "Running CI suite..."
    set +e
    cmd_stop_deps
    cmd_stop
    set -e
    cmd_install
    cmd_test_init "${DATASTORE_TYPE}"
    # The arg will be the image type
    cmd_build_and_upload_image "${DATASTORE_TYPE}" "${RESTART_TROVE}"

    # Test in fake mode.
    exclaim "Testing in fake mode."
    cmd_start_fake
    FAKE_MODE=True cmd_int_tests
    cmd_stop

    # Test in real mode.
    exclaim "Testing in real mode."
    cmd_start
    FAKE_MODE=False cmd_int_tests
}

function cmd_wipe_queues() {
    # Obliterate rabbit.
    for i in stop_app reset start_app "change_password guest $RABBIT_PASSWORD"; \
    do sudo rabbitmqctl $i; done
}

function cmd_clear() {
    cmd_int_tests --group=dbaas.api.instances.delete
    clean_instances
    mysql_nova "DELETE FROM instance_info_caches;"
    mysql_nova "DELETE FROM instances;"
    mysql_trove "DELETE FROM instances;"
    mysql_trove "DELETE FROM service_statuses;"
    cmd_wipe_queues
}

function exec_cmd_on_output() {
    local output_cmd=$1
    local exec_cmd=$2
    local delete_sleep_time=${3:-0}
    local skip_pattern=${4:-""}

    echo "Cleaning up objects from '${output_cmd}'"
    local skip_cmd="cat"
    if [[ -n "${skip_pattern}" ]]; then
        local temp_skip_cmd=(grep -v "${skip_pattern}")
        skip_cmd=${temp_skip_cmd[*]}
    fi
    local max_retry=10
    local count=1
    local again=
    while true; do
        ids=$($output_cmd | ${skip_cmd} | grep -v -e'---' | grep -iv ' id ' | cut -d'|' -f2)
        if [[ -n $ids ]]; then
            for id in $ids; do
                echo -e "Executing: ${exec_cmd} ${id} ${again}"
                # don't stop if we get an error executing the delete, and don't print
                # out anything from stderr
                set +e
                ${exec_cmd} "${id}" &> /dev/null
                set -e
            done
            sleep "${delete_sleep_time}"
        else
            break
        fi
        ((count++))
        if [[ "$count" -gt "$max_retry" ]]; then
            exclaim "${COLOR_RED}WARNING: '$output_cmd' still returning output after ${max_retry} delete attempts${COLOR_NONE}"
            break
        fi
        again="${COLOR_BLUE}(again)${COLOR_NONE}"
    done
}

function cmd_clean() {
    local project_name=${1:-alt_demo}

    exclaim "Cleaning up project '${COLOR_BLUE}${project_name}${COLOR_NONE}'"

    # reset any stuck backups
    mysql_trove "update backups set state='COMPLETED'"
    # clear out any DS version metadata
    mysql_trove "delete from datastore_version_metadata"
    # reset any stuck instances, and clear all replicas
    mysql_trove "update instances set task_id=2, slave_of_id=null"
    # reset any stuck clusters
    mysql_trove "update clusters set task_id=1"
    # get rid of any extraneous quota usage
    mysql_trove "delete from quota_usages"
    # mark all instance modules as deleted
    mysql_trove "update instance_modules set deleted=1"

    if [[ ! -f "${PATH_DEVSTACK_SRC}"/accrc/${project_name}/admin ]]; then
        echo "Could not find credentials file for project '${project_name}'"
        exit 1
    fi
    source "${PATH_DEVSTACK_SRC}"/accrc/${project_name}/admin
    # delete any trove clusters
    exec_cmd_on_output "trove cluster-list" "trove cluster-delete" 20
    # delete any trove instances
    exec_cmd_on_output "trove list" "trove delete" 10
    # delete any backups
    exec_cmd_on_output "trove backup-list" "trove backup-delete"
    # clean up any remaining nova instances or cinder volumes
    exec_cmd_on_output "openstack $CLOUD_ADMIN_ARG server list" "openstack $CLOUD_ADMIN_ARG server delete" 5
    exec_cmd_on_output "openstack $CLOUD_ADMIN_ARG volume list" "openstack $CLOUD_ADMIN_ARG volume delete" 1
    # delete any config groups since all instances should be gone now
    exec_cmd_on_output "trove configuration-list" "trove configuration-delete"
    # delete any modules too
    exec_cmd_on_output "trove module-list" "trove module-delete"
    # make sure that security groups are also gone, except the default
    exec_cmd_on_output "openstack $CLOUD_ADMIN_ARG security group list" "openstack $CLOUD_ADMIN_ARG security group delete" 0 "default"
    # delete server groups
    exec_cmd_on_output "openstack $CLOUD_ADMIN_ARG server group list" "openstack $CLOUD_ADMIN_ARG server group delete"
}

function cmd_kick_start() {
    local DATASTORE_TYPE=$1
    local RESTART_TROVE=${2:-$(get_bool RESTART_TROVE "true")}

    if [ -z "${DATASTORE_TYPE}" ]; then
        exclaim "${COLOR_RED}Datastore argument was not specified.${COLOR_NONE}"
        exit 1
    fi

    exclaim "Running kick-start for $DATASTORE_TYPE (restart trove: $RESTART_TROVE)"
    dump_env
    cmd_test_init "${DATASTORE_TYPE}"
    cmd_build_and_upload_image "${DATASTORE_TYPE}" "${RESTART_TROVE}"
}

function cmd_dsvm_gate_tests() {
    ACTUAL_HOSTNAME=$(hostname -I | sed 's/[0-9]*\.[0-9]*\.[0-9]*\.1\b//g' | sed 's/[0-9a-z][0-9a-z]*:.*:[0-9a-z][0-9a-z]*//g' | sed 's/ /\n/g' | sed '/^$/d' | sort -bu | head -1)

    local DATASTORE_TYPE=${1:-'mysql'}
    local TEST_GROUP=${2:-${DATASTORE_TYPE}}
    local HOST_SCP_USERNAME=${3:-'jenkins'}
    local GUEST_USERNAME=${4:-'ubuntu'}
    local CONTROLLER_IP=${5:-$ACTUAL_HOSTNAME}
    local ESCAPED_PATH_TROVE=${6:-'\/opt\/stack\/new\/trove'}

    exclaim "Running cmd_dsvm_gate_tests ..."
    export REPORT_DIRECTORY=${REPORT_DIRECTORY:=$HOME/dsvm-report/}
    export TROVE_REPORT_DIR=$HOME/dsvm-report/
    TROVESTACK_DUMP_ENV=true

    # Devstack vm-gate runs as the jenkins user, but needs to connect to the guest image as ubuntu
    echo "User=ubuntu" >> /home/jenkins/.ssh/config

    # Fix iptables rules that prevent amqp connections from the devstack box to the guests
    sudo iptables -D openstack-INPUT -j REJECT --reject-with icmp-host-prohibited || true

    sudo chown -R $(whoami) /etc/trove
    iniset $TROVE_GUESTAGENT_CONF DEFAULT rabbit_host $CONTROLLER_IP
    iniset $TROVE_GUESTAGENT_CONF oslo_messaging_rabbit rabbit_hosts $CONTROLLER_IP
    cd $TROVESTACK_SCRIPTS
    sudo -H $HTTP_PROXY pip install --upgrade pip dib-utils

    local RESTART_TROVE=false
    cmd_kick_start "${DATASTORE_TYPE}" "${RESTART_TROVE}"

    # Update the local swift endpoint in the catalog to use the CONTROLLER_IP instead of 127.0.0.1
    SWIFT_ENDPOINTS=$(openstack $CLOUD_ADMIN_ARG endpoint list --service swift -c ID -f value)
    openstack $CLOUD_ADMIN_ARG endpoint create swift public 'http://'$CONTROLLER_IP':8080/v1/AUTH_$(tenant_id)s' --region RegionOne
    openstack $CLOUD_ADMIN_ARG endpoint create swift internal 'http://'$CONTROLLER_IP':8080/v1/AUTH_$(tenant_id)s' --region RegionOne
    openstack $CLOUD_ADMIN_ARG endpoint create swift admin 'http://'$CONTROLLER_IP':8080' --region RegionOne
    echo $SWIFT_ENDPOINTS | xargs -n 1 openstack $CLOUD_ADMIN_ARG endpoint delete

    cmd_int_tests --group=$TEST_GROUP
}

function cmd_reset_task() {
    mysql_trove "UPDATE instances SET task_id=1 WHERE id='$1'"
}

function cmd_clone_projects() {
    local UPDATE_PROJECTS=$1
    local PROJECT_LIST_FILES=${@:2}

    for project in $(cat $PROJECT_LIST_FILES); do
        if [ ! -d $PATH_DEVSTACK_OUTPUT/$project ]; then
            echo "Creating a new clone of $project..."
            git_clone $GIT_OPENSTACK/"$project".git ${PATH_DEVSTACK_OUTPUT}/$project master
        else
            if [ $UPDATE_PROJECTS != "force_update" ]; then
                echo "$project was already cloned or exists in a shared folder. Ignoring..."
            else
                echo "$project was already cloned. Pulling changes to update."
                cd $PATH_DEVSTACK_OUTPUT/$project
                git pull
            fi
        fi
        # Switch to a branch if specified.  The order the variables are checked is:
        # <PROJECT>_BRANCH then PROJECT_CLIENT_BRANCH (if a client) then PROJECT_BRANCH
        # Note: For the Trove project, only TROVE_BRANCH and PYTHON_TROVECLIENT_BRANCH are used
        PROJECT_BRANCH_NAME=$(eval echo "${project}_BRANCH" | tr '[:lower:]-' '[:upper:]_')
        PROJECT_BRANCH_VALUE=${!PROJECT_BRANCH_NAME}
        # TROVE_BRANCH is defaulted to master if not set, so use the original value here
        if [[ "$project" = "trove" ]]; then
            PROJECT_BRANCH_VALUE=${TROVE_BRANCH_ORIG}
        fi
        BRANCH_SPECIFIED=$(test -z "${PROJECT_BRANCH_VALUE}${PROJECT_CLIENT_BRANCH}${PROJECT_BRANCH}" || echo 'True')
        if [[ "${BRANCH_SPECIFIED}" = "True" ]]; then
            # Set up the default branch and env var names for the project
            DEFAULT_BRANCH="$PROJECT_BRANCH"
            ENV_VARS="$PROJECT_BRANCH_NAME' or 'PROJECT_BRANCH"
            # Don't use 'PROJECT_BRANCH' or 'PROJECT_CLIENT_BRANCH' for the Trove project
            if [[ "$project" =~ "trove" ]]; then
                DEFAULT_BRANCH=master
                ENV_VARS="$PROJECT_BRANCH_NAME"
            # Use 'PROJECT_CLIENT_BRANCH' first for clients
            elif [[ "$project" =~ "client" ]]; then
                DEFAULT_BRANCH="${PROJECT_CLIENT_BRANCH:-$PROJECT_BRANCH}"
                ENV_VARS="$PROJECT_BRANCH_NAME' or 'PROJECT_CLIENT_BRANCH' or 'PROJECT_BRANCH"
            fi
            PROJ_BRANCH=$(get_project_branch $PROJECT_BRANCH_NAME $DEFAULT_BRANCH)
            git_checkout "$project" "$PATH_DEVSTACK_OUTPUT/$project" "$PROJ_BRANCH" "$ENV_VARS"
        fi
    done
}

function cmd_repl() {
    INT_TEST_OPTIONS=-i cmd_int_tests_white_box --repl --group=_does_not_exist_ $@
}

###############################################################################
# Process the user provided command and run the appropriate command
###############################################################################

# Let's not run this as the root user
if [ $EUID -eq 0 ]; then
   echo "You are running this script as root. You need to run as a regular user"
   exit 1
fi

# Set this to exit immediately on error
set -o errexit

set_http_proxy

function print_usage() {
    echo "Usage: $0 [command]"
    echo "
    Commands :
        --setup environment--
          install         - Install all the required dependencies and bring up tr-api and tr-tmgr
                          - devstack config can be altered by using a USER_LOCAL_CONF file
                            which will be copied into devstack/local.conf on each 'install' run
                            (defaults to \$HOME/$USER_LOCAL_CONF_NAME)
                          - Set DEVSTACK_BRANCH to switch the branch/commit of devstack
                            (i.e. 'stable/kilo' or '7ef2462')
          test-init       - Configure the test configuration files and add keystone test users
          build-image     - Builds the vm image for the trove guest
          initialize      - Reinitialize the trove database, users, services, and test config

        --helper for environment--
          kick-start      - kick start the setup of trove.
                            (trovestack test-init/build-image in one step)
                          - Set REBUILD_IMAGE=True to force rebuild (won't use cached image)

        --trove dependency services--
          start-deps      - Start or resume daemons Trove depends on.
          stop-deps       - Kill daemons Trove depends on.

        --trove services--
          start           - Start or resume Trove daemons.
          stop            - Kill Trove daemons.
          restart         - Runs stop then start for Trove services.

        --tests--
          unit-tests      - Run the unit tests.dependencies
          int-tests       - Runs the integration tests (requires all daemons).
                            See trove/tests/int_tests.py for list of registered groups.
                            Examples:
                              Run original MySQL tests:        ./trovestack int-tests
                              Run all MySQL scenario tests:    ./trovestack int-tests --group=mysql-supported
                              Run single Redis scenario tests: ./trovestack int-tests --group=redis-supported-single
                              Run specific functional tests:   ./trovestack int-tests --group=module-create --group=configuration-create
          simple-tests    - Runs the simple integration tests (requires all daemons).
          dsvm-gate-tests - Configures and runs the int-tests in a devstack vm-gate environment.

        --tools--
          debug           - Debug this script (shows all commands).
          wipe-logs       - Resets all log files.
          rd-sql          - Opens the Trove MySQL database.
          vagrant-ssh     - Runs a command from the host on the server.
          clear           - Destroy instances and rabbit queues.
          clean           - Clean up resources created by a failed test run.  Takes
                            project_name as an optional parameter (defaults to alt_demo).
          run             - Starts RD but not in a screen.
          run-fake        - Runs the server in fake mode.
          update-projects - Git pull on all the daemons trove dependencies.
          reset-task      - Sets an instance task to NONE.
          wipe-queues     - Resets RabbitMQ queues.
    "
    exit 1
}

function run_command() {
    # Print the available commands
    if [ $# -lt 1 ]; then
        print_usage
    fi

    case "$1" in
        "install" ) cmd_install;;
        "test-init" ) shift; cmd_test_init $@;;
        "build-image" ) shift; cmd_build_image $@;;
        "initialize" ) cmd_initialize;;
        "unit-tests" ) cmd_unit_tests;;
        "start-deps" ) cmd_start_deps;;
        "stop-deps" ) cmd_stop_deps;;
        "start" ) cmd_start;;
        "int-tests" ) shift; cmd_int_tests $@;;
        "int-tests-wb" ) shift; cmd_int_tests_white_box $@;;
        "simple-tests") shift; cmd_int_tests_simple $@;;
        "stop" ) cmd_stop;;
        "restart" ) cmd_stop; cmd_start;;
        "wipe-logs" ) cmd_wipe_logs;;
        "rd-sql" ) shift; cmd_rd_sql $@;;
        "fake-sql" ) shift; cmd_fake_sql $@;;
        "run-ci" ) shift; cmd_run_ci $@;;
        "vagrant-ssh" ) shift; cmd_vagrant_ssh $@;;
        "debug" ) shift; echo "Enabling debugging."; \
                  set -o xtrace; TROVESTACK_DUMP_ENV=true; run_command $@;;
        "clear" ) shift; cmd_clear $@;;
        "clean" ) shift; cmd_clean $@;;
        "run" ) shift; cmd_run $@;;
        "kick-start" ) shift; cmd_kick_start $@;;
        "dsvm-gate-tests" ) shift; cmd_dsvm_gate_tests $@;;
        "run-fake" ) shift; cmd_run_fake $@;;
        "start-fake" ) shift; cmd_start_fake $@;;
        "update-projects" ) cmd_clone_projects force_update \
                            $TROVESTACK_SCRIPTS/projects-list \
                            $TROVESTACK_SCRIPTS/image-projects-list;;
        "reset-task" ) shift; cmd_reset_task $@;;
        "wipe-queues" ) shift; cmd_wipe_queues $@;;
        "example-tests" ) shift; cmd_example_tests $@;;
        "repl" ) shift; cmd_repl $@;;
        "help" ) print_usage;;
        * )
            echo "'$1' not a valid command"
            exit 1
    esac
}

run_command $@