diff options
| -rw-r--r-- | INSTALL.Docker.md | 2 | ||||
| -rwxr-xr-x | ovn/utilities/ovn-docker-overlay-driver | 15 | ||||
| -rw-r--r-- | ovn/utilities/ovn-nbctl.8.xml | 82 | ||||
| -rw-r--r-- | ovn/utilities/ovn-nbctl.c | 96 | ||||
| -rw-r--r-- | tests/ovn-controller-vtep.at | 38 | ||||
| -rw-r--r-- | tests/ovn-nbctl.at | 70 | ||||
| -rw-r--r-- | tests/ovn-sbctl.at | 16 | ||||
| -rw-r--r-- | tests/ovn.at | 270 | ||||
| -rw-r--r-- | tutorial/OVN-Tutorial.md | 72 | ||||
| -rwxr-xr-x | tutorial/ovn/env1/add-third-port.sh | 6 | ||||
| -rwxr-xr-x | tutorial/ovn/env1/setup.sh | 12 | ||||
| -rwxr-xr-x | tutorial/ovn/env2/setup.sh | 24 | ||||
| -rwxr-xr-x | tutorial/ovn/env3/setup.sh | 28 | ||||
| -rwxr-xr-x | tutorial/ovn/env4/setup2.sh | 16 | ||||
| -rwxr-xr-x | tutorial/ovn/env5/setup.sh | 24 | ||||
| -rwxr-xr-x | tutorial/ovn/env6/setup.sh | 12 | ||||
| -rwxr-xr-x | tutorial/ovn/env7/add-container-ports.sh | 12 | ||||
| -rwxr-xr-x | tutorial/ovn/env7/setup.sh | 18 | ||||
| -rw-r--r-- | utilities/ovs-sim.1.xml | 10 |
19 files changed, 413 insertions, 410 deletions
diff --git a/INSTALL.Docker.md b/INSTALL.Docker.md index eb277569e..cf15b29f3 100644 --- a/INSTALL.Docker.md +++ b/INSTALL.Docker.md @@ -157,7 +157,7 @@ Docker currently does not have a CLI command to list all your logical ports. But you can look at them in the OVN database, by running: ``` -ovn-nbctl --db=tcp:$CENTRAL_IP:6640 lport-list $NID +ovn-nbctl --db=tcp:$CENTRAL_IP:6640 lsp-list $NID ``` * You can also create a logical port and attach it to a running container. diff --git a/ovn/utilities/ovn-docker-overlay-driver b/ovn/utilities/ovn-docker-overlay-driver index 38255e705..467a22354 100755 --- a/ovn/utilities/ovn-docker-overlay-driver +++ b/ovn/utilities/ovn-docker-overlay-driver @@ -228,9 +228,9 @@ def create_endpoint(): mac_address_output = "" try: - ovn_nbctl("lport-add", nid, eid) + ovn_nbctl("lsp-add", nid, eid) except Exception as e: - error = "create_endpoint: lport-add (%s)" % (str(e)) + error = "create_endpoint: lsp-add (%s)" % (str(e)) return jsonify({'Err': error}) if not mac_address_input: @@ -243,10 +243,10 @@ def create_endpoint(): mac_address = mac_address_input try: - ovn_nbctl("lport-set-addresses", eid, + ovn_nbctl("lsp-set-addresses", eid, mac_address + " " + ip_address) except Exception as e: - error = "create_endpoint: lport-set-addresses (%s)" % (str(e)) + error = "create_endpoint: lsp-set-addresses (%s)" % (str(e)) return jsonify({'Err': error}) # Only return a mac address if one did not come as request. @@ -295,7 +295,8 @@ def show_endpoint(): if error: jsonify({'Err': error}) except Exception as e: - error = "show_endpoint: get Logical_Switch_Port addresses. (%s)" % (str(e)) + error = "show_endpoint: get Logical_Switch_Port addresses. (%s)" \ + % (str(e)) return jsonify({'Err': error}) veth_outside = eid[0:15] @@ -321,9 +322,9 @@ def delete_endpoint(): abort(400) try: - ovn_nbctl("lport-del", eid) + ovn_nbctl("lsp-del", eid) except Exception as e: - error = "delete_endpoint: lport-del %s" % (str(e)) + error = "delete_endpoint: lsp-del %s" % (str(e)) return jsonify({'Err': error}) return jsonify({}) diff --git a/ovn/utilities/ovn-nbctl.8.xml b/ovn/utilities/ovn-nbctl.8.xml index fd2045516..35a44f8b8 100644 --- a/ovn/utilities/ovn-nbctl.8.xml +++ b/ovn/utilities/ovn-nbctl.8.xml @@ -94,17 +94,17 @@ </dd> </dl> - <h1>Logical Port Commands</h1> + <h1>Logical Switch Port Commands</h1> <dl> - <dt>[<code>--may-exist</code>] <code>lport-add</code> <var>lswitch</var> <var>lport</var></dt> + <dt>[<code>--may-exist</code>] <code>lsp-add</code> <var>lswitch</var> <var>port</var></dt> <dd> <p> - Creates on <var>lswitch</var> a new logical port named - <var>lport</var>. + Creates on <var>lswitch</var> a new logical switch port named + <var>port</var>. </p> <p> - It is an error if a logical port named <var>lport</var> already + It is an error if a logical port named <var>port</var> already exists, unless <code>--may-exist</code> is specified. Regardless of <code>--may-exist</code>, it is an error if the existing port is in some logical switch other than <var>lswitch</var> or if it has a @@ -112,19 +112,19 @@ </p> </dd> - <dt>[<code>--may-exist</code>] <code>lport-add</code> <var>lswitch</var> <var>lport</var> <var>parent</var> <var>tag</var></dt> + <dt>[<code>--may-exist</code>] <code>lsp-add</code> <var>lswitch</var> <var>port</var> <var>parent</var> <var>tag</var></dt> <dd> <p> - Creates on <var>lswitch</var> a logical port named <var>lport</var> - that is a child of <var>parent</var> that is identifed with VLAN ID - <var>tag</var>. This is useful in cases such as virtualized - container environments where Open vSwitch does not have a direct - connection to the container's port and it must be shared with - the virtual machine's port. + Creates on <var>lswitch</var> a logical switch port named + <var>port</var> that is a child of <var>parent</var> that is + identifed with VLAN ID <var>tag</var>. This is useful in + cases such as virtualized container environments where Open + vSwitch does not have a direct connection to the container's + port and it must be shared with the virtual machine's port. </p> <p> - It is an error if a logical port named <var>lport</var> already + It is an error if a logical port named <var>port</var> already exists, unless <code>--may-exist</code> is specified. Regardless of <code>--may-exist</code>, it is an error if the existing port is not in <var>lswitch</var> or if it does not have the specified @@ -132,55 +132,55 @@ </p> </dd> - <dt>[<code>--if-exists</code>] <code>lport-del</code> <var>lport</var></dt> + <dt>[<code>--if-exists</code>] <code>lsp-del</code> <var>port</var></dt> <dd> - Deletes <var>lport</var>. It is an error if <var>lport</var> does + Deletes <var>port</var>. It is an error if <var>port</var> does not exist, unless <code>--if-exists</code> is specified. </dd> - <dt><code>lport-list</code> <var>lswitch</var></dt> + <dt><code>lsp-list</code> <var>lswitch</var></dt> <dd> - Lists all the logical ports within <var>lswitch</var> on + Lists all the logical switch ports within <var>lswitch</var> on standard output, one per line. </dd> - <dt><code>lport-get-parent</code> <var>lport</var></dt> + <dt><code>lsp-get-parent</code> <var>port</var></dt> <dd> - If set, get the parent port of <var>lport</var>. If not set, print + If set, get the parent port of <var>port</var>. If not set, print nothing. </dd> - <dt><code>lport-get-tag</code> <var>lport</var></dt> + <dt><code>lsp-get-tag</code> <var>port</var></dt> <dd> - If set, get the tag for <var>lport</var> traffic. If not set, print + If set, get the tag for <var>port</var> traffic. If not set, print nothing. </dd> - <dt><code>lport-set-addresses</code> <var>lport</var> [<var>address</var>]...</dt> + <dt><code>lsp-set-addresses</code> <var>port</var> [<var>address</var>]...</dt> <dd> - Sets the addresses associated with <var>lport</var> to + Sets the addresses associated with <var>port</var> to <var>address</var>. Each <var>address</var> should be either an Ethernet address or an Ethernet address followed by an IP address (separated by a space and quoted to form a single command-line argument). The special form <code>unknown</code> is also valid. Multiple Ethernet addresses or Ethernet+IP pairs may be set. If no - <var>address</var> argument is given, <var>lport</var> will have no + <var>address</var> argument is given, <var>port</var> will have no addresses associated with it. </dd> - <dt><code>lport-get-addresses</code> <var>lport</var></dt> + <dt><code>lsp-get-addresses</code> <var>port</var></dt> <dd> - Lists all the addresses associated with <var>lport</var> on standard + Lists all the addresses associated with <var>port</var> on standard output, one per line. </dd> - <dt><code>lport-set-port-security</code> <var>lport</var> [<var>addrs</var>]...</dt> + <dt><code>lsp-set-port-security</code> <var>port</var> [<var>addrs</var>]...</dt> <dd> <p> - Sets the port security addresses associated with <var>lport</var> to + Sets the port security addresses associated with <var>port</var> to <var>addrs</var>. Multiple sets of addresses may be set by using multiple <var>addrs</var> arguments. If no <var>addrs</var> argument - is given, <var>lport</var> will not have port security enabled. + is given, <var>port</var> will not have port security enabled. </p> <p> @@ -192,47 +192,47 @@ </p> </dd> - <dt><code>lport-get-port-security</code> <var>lport</var></dt> + <dt><code>lsp-get-port-security</code> <var>port</var></dt> <dd> - Lists all the port security addresses associated with <var>lport</var> + Lists all the port security addresses associated with <var>port</var> on standard output, one per line. </dd> - <dt><code>lport-get-up</code> <var>lport</var></dt> + <dt><code>lsp-get-up</code> <var>port</var></dt> <dd> - Prints the state of <var>lport</var>, either <code>up</code> or + Prints the state of <var>port</var>, either <code>up</code> or <code>down</code>. </dd> - <dt><code>lport-set-enabled</code> <var>lport</var> <var>state</var></dt> + <dt><code>lsp-set-enabled</code> <var>port</var> <var>state</var></dt> <dd> - Set the administrative state of <var>lport</var>, either <code>enabled</code> + Set the administrative state of <var>port</var>, either <code>enabled</code> or <code>disabled</code>. When a port is disabled, no traffic is allowed into or out of the port. </dd> - <dt><code>lport-get-enabled</code> <var>lport</var></dt> + <dt><code>lsp-get-enabled</code> <var>port</var></dt> <dd> - Prints the administrative state of <var>lport</var>, either <code>enabled</code> + Prints the administrative state of <var>port</var>, either <code>enabled</code> or <code>disabled</code>. </dd> - <dt><code>lport-set-type</code> <var>lport</var> <var>type</var></dt> + <dt><code>lsp-set-type</code> <var>port</var> <var>type</var></dt> <dd> Set the type for the logical port. No special types have been implemented yet. </dd> - <dt><code>lport-get-type</code> <var>lport</var></dt> + <dt><code>lsp-get-type</code> <var>port</var></dt> <dd> Get the type for the logical port. </dd> - <dt><code>lport-set-options</code> <var>lport</var> [<var>key=value</var>]...</dt> + <dt><code>lsp-set-options</code> <var>port</var> [<var>key=value</var>]...</dt> <dd> Set type-specific key-value options for the logical port. </dd> - <dt><code>lport-get-options</code> <var>lport</var></dt> + <dt><code>lsp-get-options</code> <var>port</var></dt> <dd> Get the type-specific options for the logical port. </dd> diff --git a/ovn/utilities/ovn-nbctl.c b/ovn/utilities/ovn-nbctl.c index 1d8addf56..10ff952a0 100644 --- a/ovn/utilities/ovn-nbctl.c +++ b/ovn/utilities/ovn-nbctl.c @@ -308,31 +308,31 @@ ACL commands:\n\ acl-list LSWITCH print ACLs for LSWITCH\n\ \n\ Logical switch port commands:\n\ - lport-add LSWITCH LPORT add logical port LPORT on LSWITCH\n\ - lport-add LSWITCH LPORT PARENT TAG\n\ - add logical port LPORT on LSWITCH with PARENT\n\ + lsp-add LSWITCH PORT add logical port PORT on LSWITCH\n\ + lsp-add LSWITCH PORT PARENT TAG\n\ + add logical port PORT on LSWITCH with PARENT\n\ on TAG\n\ - lport-del LPORT delete LPORT from its attached switch\n\ - lport-list LSWITCH print the names of all logical ports on LSWITCH\n\ - lport-get-parent LPORT get the parent of LPORT if set\n\ - lport-get-tag LPORT get the LPORT's tag if set\n\ - lport-set-addresses LPORT [ADDRESS]...\n\ - set MAC or MAC+IP addresses for LPORT.\n\ - lport-get-addresses LPORT get a list of MAC addresses on LPORT\n\ - lport-set-port-security LPORT [ADDRS]...\n\ - set port security addresses for LPORT.\n\ - lport-get-port-security LPORT get LPORT's port security addresses\n\ - lport-get-up LPORT get state of LPORT ('up' or 'down')\n\ - lport-set-enabled LPORT STATE\n\ - set administrative state LPORT\n\ + lsp-del PORT delete PORT from its attached switch\n\ + lsp-list LSWITCH print the names of all logical ports on LSWITCH\n\ + lsp-get-parent PORT get the parent of PORT if set\n\ + lsp-get-tag PORT get the PORT's tag if set\n\ + lsp-set-addresses PORT [ADDRESS]...\n\ + set MAC or MAC+IP addresses for PORT.\n\ + lsp-get-addresses PORT get a list of MAC addresses on PORT\n\ + lsp-set-port-security PORT [ADDRS]...\n\ + set port security addresses for PORT.\n\ + lsp-get-port-security PORT get PORT's port security addresses\n\ + lsp-get-up PORT get state of PORT ('up' or 'down')\n\ + lsp-set-enabled PORT STATE\n\ + set administrative state PORT\n\ ('enabled' or 'disabled')\n\ - lport-get-enabled LPORT get administrative state LPORT\n\ + lsp-get-enabled PORT get administrative state PORT\n\ ('enabled' or 'disabled')\n\ - lport-set-type LPORT TYPE Set the type for LPORT\n\ - lport-get-type LPORT Get the type for LPORT\n\ - lport-set-options LPORT KEY=VALUE [KEY=VALUE]...\n\ - Set options related to the type of LPORT\n\ - lport-get-options LPORT Get the type specific options for LPORT\n\ + lsp-set-type PORT TYPE set the type for PORT\n\ + lsp-get-type PORT get the type for PORT\n\ + lsp-set-options PORT KEY=VALUE [KEY=VALUE]...\n\ + set options related to the type of PORT\n\ + lsp-get-options PORT get the type specific options for PORT\n\ \n\ Logical router commands:\n\ lr-add [ROUTER] create a logical router named ROUTER\n\ @@ -673,7 +673,7 @@ nbctl_lsp_add(struct ctl_context *ctx) ctl_fatal("%s: invalid tag", ctx->argv[4]); } } else { - ctl_fatal("lport-add with parent must also specify a tag"); + ctl_fatal("lsp-add with parent must also specify a tag"); } const char *lsp_name = ctx->argv[2]; @@ -681,7 +681,7 @@ nbctl_lsp_add(struct ctl_context *ctx) lsp = lsp_by_name_or_uuid(ctx, lsp_name, false); if (lsp) { if (!may_exist) { - ctl_fatal("%s: an lport with this name already exists", + ctl_fatal("%s: a port with this name already exists", lsp_name); } @@ -689,29 +689,29 @@ nbctl_lsp_add(struct ctl_context *ctx) lsw = lsp_to_lswitch(ctx->idl, lsp); if (lsw != lswitch) { char uuid_s[UUID_LEN + 1]; - ctl_fatal("%s: lport already exists but in lswitch %s", lsp_name, + ctl_fatal("%s: port already exists but in lswitch %s", lsp_name, lswitch_get_name(lsw, uuid_s, sizeof uuid_s)); } if (parent_name) { if (!lsp->parent_name) { - ctl_fatal("%s: lport already exists but has no parent", + ctl_fatal("%s: port already exists but has no parent", lsp_name); } else if (strcmp(parent_name, lsp->parent_name)) { - ctl_fatal("%s: lport already exists with different parent %s", + ctl_fatal("%s: port already exists with different parent %s", lsp_name, lsp->parent_name); } if (!lsp->n_tag) { - ctl_fatal("%s: lport already exists but has no tag", + ctl_fatal("%s: port already exists but has no tag", lsp_name); } else if (lsp->tag[0] != tag) { - ctl_fatal("%s: lport already exists with different " + ctl_fatal("%s: port already exists with different " "tag %"PRId64, lsp_name, lsp->tag[0]); } } else { if (lsp->parent_name) { - ctl_fatal("%s: lport already exists but has parent %s", + ctl_fatal("%s: port already exists but has parent %s", lsp_name, lsp->parent_name); } } @@ -2084,36 +2084,32 @@ static const struct ctl_command_syntax nbctl_commands[] = { { "acl-list", 1, 1, "LSWITCH", NULL, nbctl_acl_list, NULL, "", RO }, /* logical switch port commands. */ - { "lport-add", 2, 4, "LSWITCH LPORT [PARENT] [TAG]", NULL, nbctl_lsp_add, + { "lsp-add", 2, 4, "LSWITCH PORT [PARENT] [TAG]", NULL, nbctl_lsp_add, NULL, "--may-exist", RW }, - { "lport-del", 1, 1, "LPORT", NULL, nbctl_lsp_del, NULL, "--if-exists", - RW }, - { "lport-list", 1, 1, "LSWITCH", NULL, nbctl_lsp_list, NULL, "", RO }, - { "lport-get-parent", 1, 1, "LPORT", NULL, nbctl_lsp_get_parent, NULL, + { "lsp-del", 1, 1, "PORT", NULL, nbctl_lsp_del, NULL, "--if-exists", RW }, + { "lsp-list", 1, 1, "LSWITCH", NULL, nbctl_lsp_list, NULL, "", RO }, + { "lsp-get-parent", 1, 1, "PORT", NULL, nbctl_lsp_get_parent, NULL, "", RO }, - { "lport-get-tag", 1, 1, "LPORT", NULL, nbctl_lsp_get_tag, NULL, "", - RO }, - { "lport-set-addresses", 1, INT_MAX, "LPORT [ADDRESS]...", NULL, + { "lsp-get-tag", 1, 1, "PORT", NULL, nbctl_lsp_get_tag, NULL, "", RO }, + { "lsp-set-addresses", 1, INT_MAX, "PORT [ADDRESS]...", NULL, nbctl_lsp_set_addresses, NULL, "", RW }, - { "lport-get-addresses", 1, 1, "LPORT", NULL, - nbctl_lsp_get_addresses, NULL, + { "lsp-get-addresses", 1, 1, "PORT", NULL, nbctl_lsp_get_addresses, NULL, "", RO }, - { "lport-set-port-security", 0, INT_MAX, "LPORT [ADDRS]...", NULL, + { "lsp-set-port-security", 0, INT_MAX, "PORT [ADDRS]...", NULL, nbctl_lsp_set_port_security, NULL, "", RW }, - { "lport-get-port-security", 1, 1, "LPORT", NULL, + { "lsp-get-port-security", 1, 1, "PORT", NULL, nbctl_lsp_get_port_security, NULL, "", RO }, - { "lport-get-up", 1, 1, "LPORT", NULL, nbctl_lsp_get_up, NULL, "", RO }, - { "lport-set-enabled", 2, 2, "LPORT STATE", NULL, nbctl_lsp_set_enabled, + { "lsp-get-up", 1, 1, "PORT", NULL, nbctl_lsp_get_up, NULL, "", RO }, + { "lsp-set-enabled", 2, 2, "PORT STATE", NULL, nbctl_lsp_set_enabled, NULL, "", RW }, - { "lport-get-enabled", 1, 1, "LPORT", NULL, nbctl_lsp_get_enabled, NULL, + { "lsp-get-enabled", 1, 1, "PORT", NULL, nbctl_lsp_get_enabled, NULL, "", RO }, - { "lport-set-type", 2, 2, "LPORT TYPE", NULL, nbctl_lsp_set_type, NULL, + { "lsp-set-type", 2, 2, "PORT TYPE", NULL, nbctl_lsp_set_type, NULL, "", RW }, - { "lport-get-type", 1, 1, "LPORT", NULL, nbctl_lsp_get_type, NULL, "", - RO }, - { "lport-set-options", 1, INT_MAX, "LPORT KEY=VALUE [KEY=VALUE]...", NULL, + { "lsp-get-type", 1, 1, "PORT", NULL, nbctl_lsp_get_type, NULL, "", RO }, + { "lsp-set-options", 1, INT_MAX, "PORT KEY=VALUE [KEY=VALUE]...", NULL, nbctl_lsp_set_options, NULL, "", RW }, - { "lport-get-options", 1, 1, "LPORT", NULL, nbctl_lsp_get_options, NULL, + { "lsp-get-options", 1, 1, "PORT", NULL, nbctl_lsp_get_options, NULL, "", RO }, /* logical router commands. */ diff --git a/tests/ovn-controller-vtep.at b/tests/ovn-controller-vtep.at index 3eaf77ef5..5c4b5a2c2 100644 --- a/tests/ovn-controller-vtep.at +++ b/tests/ovn-controller-vtep.at @@ -102,10 +102,10 @@ m4_define([OVN_CONTROLLER_VTEP_STOP], # $3: physical vtep gateway name # $4: logical switch name on vtep gateway chassis m4_define([OVN_NB_ADD_VTEP_PORT], [ -AT_CHECK([ovn-nbctl lport-add $1 $2]) +AT_CHECK([ovn-nbctl lsp-add $1 $2]) -AT_CHECK([ovn-nbctl lport-set-type $2 vtep]) -AT_CHECK([ovn-nbctl lport-set-options $2 vtep-physical-switch=$3 vtep-logical-switch=$4]) +AT_CHECK([ovn-nbctl lsp-set-type $2 vtep]) +AT_CHECK([ovn-nbctl lsp-set-options $2 vtep-physical-switch=$3 vtep-logical-switch=$4]) ]) ############################################## @@ -321,7 +321,7 @@ ${tunnel_key} # changes the ovn-nb logical port type so that it is no longer # vtep port. -AT_CHECK([ovn-nbctl lport-set-type br-vtep_lswitch0 void]) +AT_CHECK([ovn-nbctl lsp-set-type br-vtep_lswitch0 void]) OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=tunnel_key list Logical_Switch | grep 1`"]) # now should see the tunnel key reset. AT_CHECK([vtep-ctl --columns=tunnel_key list Logical_Switch | cut -d ':' -f2 | tr -d ' '], [0], [dnl @@ -338,8 +338,8 @@ OVN_CONTROLLER_VTEP_START # creates a simple logical network with the vtep device and a fake hv chassis # 'ch0'. -AT_CHECK([ovn-nbctl lport-add br-test vif0]) -AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-test vif0]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) AT_CHECK([ovn-sbctl lport-bind vif0 ch0]) @@ -352,8 +352,8 @@ OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep br-vtep_lswitch0`" # adds another lswitch 'br-void' in ovn-nb database. AT_CHECK([ovn-nbctl lswitch-add br-void]) # adds fake hv chassis 'ch1'. -AT_CHECK([ovn-nbctl lport-add br-void vif1]) -AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-void vif1]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) AT_CHECK([ovn-sbctl lport-bind vif1 ch1]) OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"]) @@ -377,7 +377,7 @@ AT_CHECK([ovs-vsctl --columns=options list Interface bfd1.2.3.5 | cut -d ':' -f2 ]) # adds another mac to logical switch port. -AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02 f0:ab:cd:ef:01:03]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02 f0:ab:cd:ef:01:03]) OVS_WAIT_UNTIL([test -n "`vtep-ctl list Ucast_Macs_Remote | grep 03`"]) AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl @@ -386,15 +386,15 @@ AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr - ]) # removes one mac to logical switch port. -AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:03]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:03]) OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=MAC list Ucast_Macs_Remote | grep 02`"]) AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl "f0:ab:cd:ef:01:03" ]) # migrates mac to logical switch port vif1 on 'br-void'. -AT_CHECK([ovn-nbctl lport-set-addresses vif0]) -AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:03]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:03]) OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=MAC list Ucast_Macs_Remote | grep 03`"]) AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl ]) @@ -409,14 +409,14 @@ OVN_CONTROLLER_VTEP_START # creates a simple logical network with the vtep device and a fake hv chassis # 'ch0'. -AT_CHECK([ovn-nbctl lport-add br-test vif0]) -AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-test vif0]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) AT_CHECK([ovn-sbctl lport-bind vif0 ch0]) # creates another vif in the same logical switch with duplicate mac. -AT_CHECK([ovn-nbctl lport-add br-test vif1]) -AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-test vif1]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl lport-bind vif1 ch0]) # creates the logical switch in vtep and adds the corresponding logical @@ -438,13 +438,13 @@ AT_CHECK([sed -n 's/^.*\(|WARN|.*\)$/\1/p' ovn-controller-vtep.log | sed 's/([[- ]) # deletes vif1. -AT_CHECK([ovn-nbctl lport-del vif1]) +AT_CHECK([ovn-nbctl lsp-del vif1]) # adds another lswitch 'br-void' in ovn-nb database. AT_CHECK([ovn-nbctl lswitch-add br-void]) # adds fake hv chassis 'ch1' and vif1 with same mac address as vif0. -AT_CHECK([ovn-nbctl lport-add br-void vif1]) -AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-void vif1]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) AT_CHECK([ovn-sbctl lport-bind vif1 ch1]) OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"]) diff --git a/tests/ovn-nbctl.at b/tests/ovn-nbctl.at index 7f01b4d44..8b4195ed4 100644 --- a/tests/ovn-nbctl.at +++ b/tests/ovn-nbctl.at @@ -87,51 +87,51 @@ AT_CLEANUP dnl --------------------------------------------------------------------- -AT_SETUP([ovn-nbctl - basic lport commands]) +AT_SETUP([ovn-nbctl - basic logical switch port commands]) OVN_NBCTL_TEST_START AT_CHECK([ovn-nbctl lswitch-add ls0]) -AT_CHECK([ovn-nbctl lport-add ls0 lp0]) -AT_CHECK([ovn-nbctl lport-add ls0 lp0], [1], [], - [ovn-nbctl: lp0: an lport with this name already exists +AT_CHECK([ovn-nbctl lsp-add ls0 lp0]) +AT_CHECK([ovn-nbctl lsp-add ls0 lp0], [1], [], + [ovn-nbctl: lp0: a port with this name already exists ]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp0]) -AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl +AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp0]) +AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl <0> (lp0) ]) -AT_CHECK([ovn-nbctl lport-add ls0 lp1]) -AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl +AT_CHECK([ovn-nbctl lsp-add ls0 lp1]) +AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl <0> (lp0) <1> (lp1) ]) AT_CHECK([ovn-nbctl lswitch-add ls1]) -AT_CHECK([ovn-nbctl lport-add ls0 lp1], [1], [], - [ovn-nbctl: lp1: an lport with this name already exists +AT_CHECK([ovn-nbctl lsp-add ls0 lp1], [1], [], + [ovn-nbctl: lp1: a port with this name already exists ]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls1 lp1], [1], [], - [ovn-nbctl: lp1: lport already exists but in lswitch ls0 +AT_CHECK([ovn-nbctl --may-exist lsp-add ls1 lp1], [1], [], + [ovn-nbctl: lp1: port already exists but in lswitch ls0 ]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp1 lp0 5], [1], [], - [ovn-nbctl: lp1: lport already exists but has no parent +AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp1 lp0 5], [1], [], + [ovn-nbctl: lp1: port already exists but has no parent ]) -AT_CHECK([ovn-nbctl lport-del lp1]) -AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl +AT_CHECK([ovn-nbctl lsp-del lp1]) +AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl <0> (lp0) ]) -AT_CHECK([ovn-nbctl lport-add ls0 lp2 lp3 5]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp4 5], [1], [], - [ovn-nbctl: lp2: lport already exists with different parent lp3 +AT_CHECK([ovn-nbctl lsp-add ls0 lp2 lp3 5]) +AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp4 5], [1], [], + [ovn-nbctl: lp2: port already exists with different parent lp3 ]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp3 10], [1], [], - [ovn-nbctl: lp2: lport already exists with different tag 5 +AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp3 10], [1], [], + [ovn-nbctl: lp2: port already exists with different tag 5 ]) AT_CHECK([ovn-nbctl clear Logical_Switch_Port lp2 tag]) -AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp3 5], [1], [], - [ovn-nbctl: lp2: lport already exists but has no tag +AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp3 5], [1], [], + [ovn-nbctl: lp2: port already exists but has no tag ]) OVN_NBCTL_TEST_STOP @@ -143,18 +143,18 @@ AT_SETUP([ovn-nbctl - lport addresses]) OVN_NBCTL_TEST_START AT_CHECK([ovn-nbctl lswitch-add ls0]) -AT_CHECK([ovn-nbctl lport-add ls0 lp0]) -AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-add ls0 lp0]) +AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl ]) -AT_CHECK([ovn-nbctl lport-set-addresses lp0 00:11:22:33:44:55 unknown]) -AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-set-addresses lp0 00:11:22:33:44:55 unknown]) +AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl 00:11:22:33:44:55 unknown ]) -AT_CHECK([ovn-nbctl lport-set-addresses lp0]) -AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-set-addresses lp0]) +AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl ]) OVN_NBCTL_TEST_STOP @@ -166,18 +166,18 @@ AT_SETUP([ovn-nbctl - port security]) OVN_NBCTL_TEST_START AT_CHECK([ovn-nbctl lswitch-add ls0]) -AT_CHECK([ovn-nbctl lport-add ls0 lp0]) -AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-add ls0 lp0]) +AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl ]) -AT_CHECK([ovn-nbctl lport-set-port-security lp0 aa:bb:cc:dd:ee:ff 00:11:22:33:44:55]) -AT_CHECK([ovn-nbctl lport-get-port-security lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-set-port-security lp0 aa:bb:cc:dd:ee:ff 00:11:22:33:44:55]) +AT_CHECK([ovn-nbctl lsp-get-port-security lp0], [0], [dnl 00:11:22:33:44:55 aa:bb:cc:dd:ee:ff ]) -AT_CHECK([ovn-nbctl lport-set-port-security lp0]) -AT_CHECK([ovn-nbctl lport-get-port-security lp0], [0], [dnl +AT_CHECK([ovn-nbctl lsp-set-port-security lp0]) +AT_CHECK([ovn-nbctl lsp-get-port-security lp0], [0], [dnl ]) OVN_NBCTL_TEST_STOP diff --git a/tests/ovn-sbctl.at b/tests/ovn-sbctl.at index a93485145..65d5fe090 100644 --- a/tests/ovn-sbctl.at +++ b/tests/ovn-sbctl.at @@ -80,8 +80,8 @@ AT_SETUP([ovn-sbctl]) OVN_SBCTL_TEST_START AT_CHECK([ovn-nbctl lswitch-add br-test]) -AT_CHECK([ovn-nbctl lport-add br-test vif0]) -AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02]) +AT_CHECK([ovn-nbctl lsp-add br-test vif0]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) AT_CHECK([ovn-sbctl chassis-add ch0 stt 1.2.3.5]) AT_CHECK([ovn-sbctl lport-bind vif0 ch0]) @@ -93,8 +93,8 @@ Chassis "ch0" ]) # adds another 'vif1' -AT_CHECK([ovn-nbctl lport-add br-test vif1]) -AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:03]) +AT_CHECK([ovn-nbctl lsp-add br-test vif1]) +AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:03]) AT_CHECK([ovn-sbctl lport-bind vif1 ch0]) AT_CHECK([ovn-sbctl show | sed 's/vif[[0-9]]/vif/'], [0], [dnl @@ -106,7 +106,7 @@ Chassis "ch0" ]) # deletes 'vif1' -AT_CHECK([ovn-nbctl lport-del vif1]) +AT_CHECK([ovn-nbctl lsp-del vif1]) AT_CHECK([ovn-sbctl show], [0], [dnl Chassis "ch0" @@ -123,9 +123,9 @@ chassis : ${uuid} ]) # test the passing down of logical port type and options. -AT_CHECK([ovn-nbctl lport-add br-test vtep0]) -AT_CHECK([ovn-nbctl lport-set-type vtep0 vtep]) -AT_CHECK([ovn-nbctl lport-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0]) +AT_CHECK([ovn-nbctl lsp-add br-test vtep0]) +AT_CHECK([ovn-nbctl lsp-set-type vtep0 vtep]) +AT_CHECK([ovn-nbctl lsp-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0]) OVS_WAIT_UNTIL([test -n "`ovn-sbctl --columns=logical_port list Port_Binding | grep vtep0`" ]) AT_CHECK_UNQUOTED([ovn-sbctl --columns=logical_port,mac,type,options list Port_Binding vtep0], [0], [dnl diff --git a/tests/ovn.at b/tests/ovn.at index b14203fcf..34fbb11e2 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -565,17 +565,17 @@ for i in 1 2 3; do for j in 1 2 3; do ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j - ovn-nbctl lport-add lsw0 lp$i$j + ovn-nbctl lsp-add lsw0 lp$i$j if test $j = 1; then - ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown + ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown else if test $j = 3; then ip_addrs="192.168.0.$i$j fe80::ea2a:eaff:fe28:$i$j/64 192.169.0.$i$j" else ip_addrs="192.168.0.$i$j" fi - ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j $ip_addrs" - ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j + ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j $ip_addrs" + ovn-nbctl lsp-set-port-security lp$i$j f0:00:00:00:00:$i$j fi done done @@ -604,7 +604,7 @@ vif_to_hv() { # content has Ethernet destination DST and source SRC (each exactly 12 hex # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or # more) list the VIFs on which the packet should be received. INPORT and the -# OUTPORTs are specified as lport numbers, e.g. 11 for vif11. +# OUTPORTs are specified as logical switch port numbers, e.g. 11 for vif11. trim_zeros() { sed 's/\(00\)\{1,\}$//' } @@ -630,7 +630,7 @@ test_packet() { # it should be the hardware address of the target to expect to receive in an # ARP reply; otherwise no reply is expected. # -# INPORT is an lport number, e.g. 11 for vif11. +# INPORT is an logical switch port number, e.g. 11 for vif11. # SHA and REPLY_HA are each 12 hex digits. # SPA and TPA are each 8 hex digits. test_arp() { @@ -663,10 +663,11 @@ ip_to_hex() { # Send packets between all pairs of source and destination ports: # -# 1. Unicast packets are delivered to exactly one lport (except that packets -# destined to their input ports are dropped). +# 1. Unicast packets are delivered to exactly one logical switch port +# (except that packets destined to their input ports are dropped). # -# 2. Broadcast and multicast are delivered to all lports except the input port. +# 2. Broadcast and multicast are delivered to all logical switch ports +# except the input port. # # 3. When port security is turned on, the lswitch drops packets from the wrong # MAC address. @@ -677,8 +678,9 @@ ip_to_hex() { # affects behavior when port security is turned off, since otherwise port # security would drop the packet anyway.) # -# 6. The lswitch delivers packets with an unknown destination to lports with -# "unknown" among their MAC addresses (and port security disabled). +# 6. The lswitch delivers packets with an unknown destination to logical +# switch ports with "unknown" among their MAC addresses (and port +# security disabled). # # 7. The lswitch drops unicast packets that violate an ACL. # @@ -731,7 +733,7 @@ for is in 1 2 3; do test_arp $s f000000000$s $sip $tip_unknown #10 if test $jd = 3; then - # lport[123]3 has an additional ip 192.169.0.[123]3. + # lsp[123]3 has an additional ip 192.169.0.[123]3. tip=`ip_to_hex 192 169 0 $id$jd` test_arp $s f000000000$s $sip $tip f000000000$d #9 fi @@ -761,7 +763,7 @@ done # set address for lp13 with invalid characters. # lp13 should be configured with only 192.168.0.13. -ovn-nbctl lport-set-addresses lp13 "f0:00:00:00:00:13 192.168.0.13 invalid 192.169.0.13" +ovn-nbctl lsp-set-addresses lp13 "f0:00:00:00:00:13 192.168.0.13 invalid 192.169.0.13" sip=`ip_to_hex 192 168 0 11` tip=`ip_to_hex 192 168 0 13` test_arp 11 f00000000011 $sip $tip f00000000013 @@ -837,7 +839,7 @@ ovn_start # of VIF port name indicates the hypervisor it is bound to, e.g. # lp23 means VIF 3 on hv2. # -# lswitch's VLAN tag and their lports are: +# lswitch's VLAN tag and their logical switch ports are: # - ls1: # - untagged # - lports: lp11, lp12, lp21, lp22 @@ -857,13 +859,13 @@ for i in 1 2 3; do ovn-nbctl lswitch-add $lswitch_name ln_port_name=ln$i if test $i -eq 2; then - ovn-nbctl lport-add $lswitch_name $ln_port_name "" 101 + ovn-nbctl lsp-add $lswitch_name $ln_port_name "" 101 else - ovn-nbctl lport-add $lswitch_name $ln_port_name + ovn-nbctl lsp-add $lswitch_name $ln_port_name fi - ovn-nbctl lport-set-addresses $ln_port_name unknown - ovn-nbctl lport-set-type $ln_port_name localnet - ovn-nbctl lport-set-options $ln_port_name network_name=phys + ovn-nbctl lsp-set-addresses $ln_port_name unknown + ovn-nbctl lsp-set-type $ln_port_name localnet + ovn-nbctl lsp-set-options $ln_port_name network_name=phys done net_add n1 @@ -881,7 +883,7 @@ for i in 1 2; do options:rxq_pcap=hv$i/vif$i$j-rx.pcap \ ofport-request=$i$j - lport_name=lp$i$j + lsp_name=lp$i$j if test $j -le 2; then lswitch_name=ls1 elif test $j -le 4; then @@ -890,11 +892,11 @@ for i in 1 2; do lswitch_name=ls3 fi - ovn-nbctl lport-add $lswitch_name $lport_name - ovn-nbctl lport-set-addresses $lport_name f0:00:00:00:00:$i$j - ovn-nbctl lport-set-port-security $lport_name f0:00:00:00:00:$i$j + ovn-nbctl lsp-add $lswitch_name $lsp_name + ovn-nbctl lsp-set-addresses $lsp_name f0:00:00:00:00:$i$j + ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:00:$i$j - OVS_WAIT_UNTIL([test x`ovn-nbctl lport-get-up $lport_name` = xup]) + OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup]) done done @@ -914,7 +916,7 @@ vif_to_hv() { # content has Ethernet destination DST and source SRC (each exactly 12 hex # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or # more) list the VIFs on which the packet should be received. INPORT and the -# OUTPORTs are specified as lport numbers, e.g. 11 for vif11. +# OUTPORTs are specified as logical switch port numbers, e.g. 11 for vif11. trim_zeros() { sed 's/\(00\)\{1,\}$//' } @@ -1034,16 +1036,16 @@ ovn_start # Configure the Northbound database ovn-nbctl lswitch-add lsw0 -ovn-nbctl lport-add lsw0 lp1 -ovn-nbctl lport-set-addresses lp1 f0:00:00:00:00:01 +ovn-nbctl lsp-add lsw0 lp1 +ovn-nbctl lsp-set-addresses lp1 f0:00:00:00:00:01 -ovn-nbctl lport-add lsw0 lp2 -ovn-nbctl lport-set-addresses lp2 f0:00:00:00:00:02 +ovn-nbctl lsp-add lsw0 lp2 +ovn-nbctl lsp-set-addresses lp2 f0:00:00:00:00:02 -ovn-nbctl lport-add lsw0 lp-vtep -ovn-nbctl lport-set-type lp-vtep vtep -ovn-nbctl lport-set-options lp-vtep vtep-physical-switch=br-vtep vtep-logical-switch=lsw0 -ovn-nbctl lport-set-addresses lp-vtep unknown +ovn-nbctl lsp-add lsw0 lp-vtep +ovn-nbctl lsp-set-type lp-vtep vtep +ovn-nbctl lsp-set-options lp-vtep vtep-physical-switch=br-vtep vtep-logical-switch=lsw0 +ovn-nbctl lsp-set-addresses lp-vtep unknown net_add n1 # Network to connect hv1, hv2, and vtep net_add n2 # Network to connect vtep and hv3 @@ -1117,7 +1119,7 @@ sleep 1 # content has Ethernet destination DST and source SRC (each exactly 12 hex # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or # more) list the VIFs on which the packet should be received. INPORT and the -# OUTPORTs are specified as lport numbers, e.g. 1 for vif1. +# OUTPORTs are specified as logical switch port numbers, e.g. 1 for vif1. trim_zeros() { sed 's/\(00\)\{1,\}$//' } @@ -1137,13 +1139,15 @@ test_packet() { # Send packets between all pairs of source and destination ports: # -# 1. Unicast packets are delivered to exactly one lport (except that packets -# destined to their input ports are dropped). +# 1. Unicast packets are delivered to exactly one logical switch port +# (except that packets destined to their input ports are dropped). # -# 2. Broadcast and multicast are delivered to all lports except the input port. +# 2. Broadcast and multicast are delivered to all logical switch ports +# except the input port. # -# 3. The lswitch delivers packets with an unknown destination to lports with -# "unknown" among their MAC addresses (and port security disabled). +# 3. The lswitch delivers packets with an unknown destination to logical +# switch ports with "unknown" among their MAC addresses (and port +# security disabled). for s in 1 2 3; do bcast= unknown= @@ -1252,13 +1256,14 @@ for i in 1 2 3; do ovn-nbctl lswitch-add ls$i for j in 1 2 3; do for k in 1 2 3; do - # Add "unknown" to MAC addresses for lp?11, so packets for - # MAC-IP bindings discovered via ARP later have somewhere to go. - if test $j$k = 11; then unknown=unknown; else unknown=; fi - - ovn-nbctl \ - -- lport-add ls$i lp$i$j$k \ - -- lport-set-addresses lp$i$j$k "f0:00:00:00:0$i:$j$k 192.168.$i$j.$k" $unknown + # Add "unknown" to MAC addresses for lp?11, so packets for + # MAC-IP bindings discovered via ARP later have somewhere to go. + if test $j$k = 11; then unknown=unknown; else unknown=; fi + + ovn-nbctl \ + -- lsp-add ls$i lp$i$j$k \ + -- lsp-set-addresses lp$i$j$k "f0:00:00:00:0$i:$j$k \ + 192.168.$i$j.$k" $unknown done done done @@ -1269,7 +1274,7 @@ for i in 1 2 3; do ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j \ 192.168.$i$j.254/24 lrp$i$j-attachment ovn-nbctl \ - -- lport-add ls$i lrp$i$j-attachment \ + -- lsp-add ls$i lrp$i$j-attachment \ -- set Logical_Switch_Port lrp$i$j-attachment type=router \ options:router-port=lrp$i$j \ addresses='"00:00:00:00:ff:'$i$j'"' @@ -1346,7 +1351,7 @@ sleep 1 # content has Ethernet destination DST and source SRC (each exactly 12 hex # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or # more) list the VIFs on which the packet should be received. INPORT and the -# OUTPORTs are specified as lport numbers, e.g. 123 for vif123. +# OUTPORTs are specified as logical switch port numbers, e.g. 123 for vif123. trim_zeros() { sed 's/\(00\)\{1,\}$//' } @@ -1389,10 +1394,11 @@ as hv1 ovs-ofctl dump-flows br-int # Send IP packets between all pairs of source and destination ports: # -# 1. Unicast IP packets are delivered to exactly one lport (except -# that packets destined to their input ports are dropped). +# 1. Unicast IP packets are delivered to exactly one logical switch port +# (except that packets destined to their input ports are dropped). # -# 2. Broadcast IP packets are delivered to all lports except the input port. +# 2. Broadcast IP packets are delivered to all logical switch ports +# except the input port. ip_to_hex() { printf "%02x%02x%02x%02x" "$@" } @@ -1471,7 +1477,7 @@ done # it should be the hardware address of the target to expect to receive in an # ARP reply; otherwise no reply is expected. # -# INPORT is an lport number, e.g. 11 for vif11. +# INPORT is an logical switch port number, e.g. 11 for vif11. # SHA and REPLY_HA are each 12 hex digits. # SPA and TPA are each 8 hex digits. test_arp() { @@ -1676,16 +1682,16 @@ for i in 1 2 3; do for j in 1 2 3; do ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j - ovn-nbctl lport-add lsw0 lp$i$j + ovn-nbctl lsp-add lsw0 lp$i$j if test $j = 1; then - ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown + ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown elif test $j = 2; then - ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" - ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j + ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" + ovn-nbctl lsp-set-port-security lp$i$j f0:00:00:00:00:$i$j else extra_addr="f0:00:00:00:0$i:$i$j fe80::ea2a:eaff:fe28:$i$j" - ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" - ovn-nbctl lport-set-port-security lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" + ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" + ovn-nbctl lsp-set-port-security lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" fi done done @@ -1721,8 +1727,8 @@ done # The packet's content has Ethernet destination DST and source SRC # (each exactly 12 hex digits) and Ethernet type ETHTYPE (4 hex digits). # The OUTPORTs (zero or more) list the VIFs on which the packet should -# be received. INPORT and the OUTPORTs are specified as lport numbers, -# e.g. 11 for vif11. +# be received. INPORT and the OUTPORTs are specified as logical switch +# port numbers, e.g. 11 for vif11. test_ip() { # This packet has bad checksums but logical L3 routing doesn't check. local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5 @@ -1743,7 +1749,7 @@ test_ip() { # it should be the hardware address of the target to expect to receive in an # ARP reply; otherwise no reply is expected. # -# INPORT is an lport number, e.g. 11 for vif11. +# INPORT is an logical switch port number, e.g. 11 for vif11. # SHA and REPLY_HA are each 12 hex digits. # SPA and TPA are each 8 hex digits. test_arp() { @@ -1954,56 +1960,56 @@ for i in 1 2 3; do test_ipv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip $tip done -# configure lport13 to send and received IPv4 packets with an address range -ovn-nbctl lport-set-port-security lp13 "f0:00:00:00:00:13 192.168.0.13 20.0.0.4/24 10.0.0.0/24" +# configure lsp13 to send and received IPv4 packets with an address range +ovn-nbctl lsp-set-port-security lp13 "f0:00:00:00:00:13 192.168.0.13 20.0.0.4/24 10.0.0.0/24" sleep 2 sip=`ip_to_hex 10 0 0 13` tip=`ip_to_hex 192 168 0 22` -# arp packet with inner ip 10.0.0.13 should be allowed for lport13 +# arp packet with inner ip 10.0.0.13 should be allowed for lsp13 test_arp 13 f00000000013 f00000000013 $sip $tip 0 f00000000022 sip=`ip_to_hex 10 0 0 14` tip=`ip_to_hex 192 168 0 23` -# IPv4 packet from lport13 with src ip 10.0.0.14 destined to lport23 +# IPv4 packet from lsp13 with src ip 10.0.0.14 destined to lsp23 # with dst ip 192.168.0.23 should be allowed test_ip 13 f00000000013 f00000000023 $sip $tip 23 sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 10 0 0 15` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 10.0.0.15 should be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 10.0.0.15 should be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip 13 sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 20 0 0 4` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 20.0.0.4 should be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 20.0.0.4 should be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip 13 sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 20 0 0 5` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 20.0.0.5 should not be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 20.0.0.5 should not be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 20 0 0 255` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 20.0.0.255 should be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 20.0.0.255 should be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip 13 sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 192 168 0 255` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 192.168.0.255 should not be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 192.168.0.255 should not be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip sip=`ip_to_hex 192 168 0 33` tip=`ip_to_hex 224 0 0 4` -# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 -# with dst ip 224.0.0.4 should be received by lport13 +# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13 +# with dst ip 224.0.0.4 should be received by lsp13 test_ip 33 f00000000033 f00000000013 $sip $tip 13 # Allow some time for packet forwarding. @@ -2084,13 +2090,13 @@ ovn-nbctl lswitch-add ls2 # Connect ls1 to R1 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1 -ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \ +ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \ options:router-port=ls1 addresses=\"00:00:00:01:02:03\" # Connect ls2 to R2 ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2 -ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \ +ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \ options:router-port=ls2 addresses=\"00:00:00:01:02:04\" # Connect R1 to R2 @@ -2101,12 +2107,12 @@ ovn-nbctl set Logical_Router R1 default_gw="20.0.0.2" ovn-nbctl set Logical_Router R2 default_gw="20.0.0.1" # Create logical port ls1-lp1 in ls1 -ovn-nbctl lport-add ls1 ls1-lp1 \ --- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add ls1 ls1-lp1 \ +-- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" # Create logical port ls2-lp1 in ls2 -ovn-nbctl lport-add ls2 ls2-lp1 \ --- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add ls2 ls2-lp1 \ +-- lsp-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" # Create two hypervisor and create OVS ports corresponding to logical ports. net_add n1 @@ -2227,21 +2233,21 @@ ovn-nbctl lswitch-add ls2 # Connect ls1 to R1 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1 -ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \ +ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \ options:router-port=ls1 addresses=\"00:00:00:01:02:03\" # Connect ls2 to R1 ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2 -ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \ +ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \ options:router-port=ls2 addresses=\"00:00:00:01:02:04\" # Create logical port ls1-lp1 in ls1 -ovn-nbctl lport-add ls1 ls1-lp1 \ --- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add ls1 ls1-lp1 \ +-- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" # Create logical port ls2-lp1 in ls2 -ovn-nbctl lport-add ls2 ls2-lp1 \ --- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add ls2 ls2-lp1 \ +-- lsp-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" # Create one hypervisor and create OVS ports corresponding to logical ports. net_add n1 @@ -2366,17 +2372,17 @@ ovn-nbctl lswitch-add bob # Connect foo to R1 ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24 rp-foo -ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \ +ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \ options:router-port=foo addresses=\"00:00:00:01:02:03\" # Connect alice to R2 ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24 rp-alice -ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \ +ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \ type=router options:router-port=alice addresses=\"00:00:00:01:02:04\" # Connect bob to R2 ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24 rp-bob -ovn-nbctl lport-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \ +ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \ options:router-port=bob addresses=\"00:00:00:01:02:05\" # Connect R1 to R2 @@ -2389,16 +2395,16 @@ ovn-nbctl lr-route-add R2 172.16.2.0/24 20.0.0.2 R1_R2 ovn-nbctl lr-route-add R2 192.168.1.0/24 20.0.0.1 # Create logical port foo1 in foo -ovn-nbctl lport-add foo foo1 \ --- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add foo foo1 \ +-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" # Create logical port alice1 in alice -ovn-nbctl lport-add alice alice1 \ --- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add alice alice1 \ +-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" # Create logical port bob1 in bob -ovn-nbctl lport-add bob bob1 \ --- lport-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2" +ovn-nbctl lsp-add bob bob1 \ +-- lsp-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2" # Create two hypervisor and create OVS ports corresponding to logical ports. net_add n1 @@ -2542,15 +2548,15 @@ AT_CHECK([ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1 AT_CHECK([ovs-vsctl add-port br-eth0 snoopvif -- set Interface snoopvif options:tx_pcap=hv/snoopvif-tx.pcap options:rxq_pcap=hv/snoopvif-rx.pcap]) # Create a vif. -AT_CHECK([ovn-nbctl lport-add lsw0 localvif1]) -AT_CHECK([ovn-nbctl lport-set-addresses localvif1 "f0:00:00:00:00:01 192.168.1.2"]) -AT_CHECK([ovn-nbctl lport-set-port-security localvif1 "f0:00:00:00:00:01"]) +AT_CHECK([ovn-nbctl lsp-add lsw0 localvif1]) +AT_CHECK([ovn-nbctl lsp-set-addresses localvif1 "f0:00:00:00:00:01 192.168.1.2"]) +AT_CHECK([ovn-nbctl lsp-set-port-security localvif1 "f0:00:00:00:00:01"]) # Create a localnet port. -AT_CHECK([ovn-nbctl lport-add lsw0 ln_port]) -AT_CHECK([ovn-nbctl lport-set-addresses ln_port unknown]) -AT_CHECK([ovn-nbctl lport-set-type ln_port localnet]) -AT_CHECK([ovn-nbctl lport-set-options ln_port network_name=physnet1]) +AT_CHECK([ovn-nbctl lsp-add lsw0 ln_port]) +AT_CHECK([ovn-nbctl lsp-set-addresses ln_port unknown]) +AT_CHECK([ovn-nbctl lsp-set-type ln_port localnet]) +AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1]) AT_CHECK([ovs-vsctl add-port br-int localvif1 -- set Interface localvif1 external_ids:iface-id=localvif1]) @@ -2567,7 +2573,7 @@ cat packets # Delete the localnet ports. AT_CHECK([ovs-vsctl del-port localvif1]) -AT_CHECK([ovn-nbctl lport-del ln_port]) +AT_CHECK([ovn-nbctl lsp-del ln_port]) as hv OVS_APP_EXIT_AND_WAIT([ovn-controller]) @@ -2611,32 +2617,32 @@ ovn-nbctl lswitch-add join # Connect foo to R1 ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24 -ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \ +ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \ options:router-port=foo addresses=\"00:00:01:01:02:03\" # Connect alice to R2 ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24 -ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \ +ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \ type=router options:router-port=alice addresses=\"00:00:02:01:02:03\" # Connect bob to R3 ovn-nbctl lrp-add R3 bob 00:00:03:01:02:03 10.32.1.1/24 -ovn-nbctl lport-add bob rp-bob -- set Logical_Switch_Port rp-bob \ +ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob \ type=router options:router-port=bob addresses=\"00:00:03:01:02:03\" # Connect R1 to join ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24 -ovn-nbctl lport-add join r1-join -- set Logical_Switch_Port r1-join \ +ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \ type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"' # Connect R2 to join ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24 -ovn-nbctl lport-add join r2-join -- set Logical_Switch_Port r2-join \ +ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \ type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"' # Connect R3 to join ovn-nbctl lrp-add R3 R3_join 00:00:04:01:02:05 20.0.0.3/24 -ovn-nbctl lport-add join r3-join -- set Logical_Switch_Port r3-join \ +ovn-nbctl lsp-add join r3-join -- set Logical_Switch_Port r3-join \ type=router options:router-port=R3_join addresses='"00:00:04:01:02:05"' #install static routes @@ -2650,16 +2656,16 @@ ovn-nbctl lr-route-add R3 192.168.1.0/24 20.0.0.1 ovn-nbctl lr-route-add R3 172.16.1.0/24 20.0.0.2 # Create logical port foo1 in foo -ovn-nbctl lport-add foo foo1 \ --- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add foo foo1 \ +-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" # Create logical port alice1 in alice -ovn-nbctl lport-add alice alice1 \ --- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add alice alice1 \ +-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" # Create logical port bob1 in bob -ovn-nbctl lport-add bob bob1 \ --- lport-set-addresses bob1 "f0:00:00:01:02:05 10.32.1.2" +ovn-nbctl lsp-add bob bob1 \ +-- lsp-set-addresses bob1 "f0:00:00:01:02:05 10.32.1.2" # Create two hypervisor and create OVS ports corresponding to logical ports. net_add n1 @@ -2844,22 +2850,22 @@ ovn-nbctl lswitch-add join # Connect foo to R1 ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24 -ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo \ +ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo \ type=router options:router-port=foo addresses=\"00:00:01:01:02:03\" # Connect alice to R2 ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24 -ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \ +ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \ type=router options:router-port=alice addresses=\"00:00:02:01:02:03\" # Connect R1 to join ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24 -ovn-nbctl lport-add join r1-join -- set Logical_Switch_Port r1-join \ +ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \ type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"' # Connect R2 to join ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24 -ovn-nbctl lport-add join r2-join -- set Logical_Switch_Port r2-join \ +ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \ type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"' @@ -2873,12 +2879,12 @@ ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \ R2 static_routes @lrt # Create logical port foo1 in foo -ovn-nbctl lport-add foo foo1 \ --- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add foo foo1 \ +-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" # Create logical port alice1 in alice -ovn-nbctl lport-add alice alice1 \ --- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add alice alice1 \ +-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" # Allow some time for ovn-northd and ovn-controller to catch up. @@ -2979,21 +2985,21 @@ ovn-nbctl lswitch-add ls2 # Connect ls1 to R1 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:f1 192.168.1.1/24 -ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 \ +ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 \ type=router options:router-port=ls1 addresses=\"00:00:00:01:02:f1\" # Connect ls2 to R1 ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:f2 172.16.1.1/24 -ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 \ +ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 \ type=router options:router-port=ls2 addresses=\"00:00:00:01:02:f2\" # Create logical port ls1-lp1 in ls1 -ovn-nbctl lport-add ls1 ls1-lp1 \ --- lport-set-addresses ls1-lp1 "00:00:00:01:02:03 192.168.1.2" +ovn-nbctl lsp-add ls1 ls1-lp1 \ +-- lsp-set-addresses ls1-lp1 "00:00:00:01:02:03 192.168.1.2" # Create logical port ls2-lp1 in ls2 -ovn-nbctl lport-add ls2 ls2-lp1 \ --- lport-set-addresses ls2-lp1 "00:00:00:01:02:04 172.16.1.2" +ovn-nbctl lsp-add ls2 ls2-lp1 \ +-- lsp-set-addresses ls2-lp1 "00:00:00:01:02:04 172.16.1.2" # Create one hypervisor and create OVS ports corresponding to logical ports. net_add n1 diff --git a/tutorial/OVN-Tutorial.md b/tutorial/OVN-Tutorial.md index 7b31fe26a..41e9456e6 100644 --- a/tutorial/OVN-Tutorial.md +++ b/tutorial/OVN-Tutorial.md @@ -65,9 +65,9 @@ You can use the `ovn-nbctl` utility to see an overview of the logical topology. $ ovn-nbctl show lswitch 78687d53-e037-4555-bcd3-f4f8eaf3f2aa (sw0) - lport sw0-port1 + port sw0-port1 addresses: 00:00:00:00:00:01 - lport sw0-port2 + port sw0-port2 addresses: 00:00:00:00:00:02 The `ovn-sbctl` utility can be used to see into the state stored in the @@ -238,14 +238,14 @@ View the logical topology with `ovn-nbctl`. $ ovn-nbctl show lswitch e3190dc2-89d1-44ed-9308-e7077de782b3 (sw0) - lport sw0-port1 + port sw0-port1 addresses: 00:00:00:00:00:01 - lport sw0-port2 + port sw0-port2 addresses: 00:00:00:00:00:02 lswitch c8ed4c5f-9733-43f6-93da-795b1aabacb1 (sw1) - lport sw1-port1 + port sw1-port1 addresses: 00:00:00:00:00:03 - lport sw1-port2 + port sw1-port2 addresses: 00:00:00:00:00:04 Physically, all ports reside on the same chassis. @@ -349,13 +349,13 @@ You can start by viewing the logical topology with `ovn-nbctl`. $ ovn-nbctl show lswitch b977dc03-79a5-41ba-9665-341a80e1abfd (sw0) - lport sw0-port1 + port sw0-port1 addresses: 00:00:00:00:00:01 - lport sw0-port2 + port sw0-port2 addresses: 00:00:00:00:00:02 - lport sw0-port4 + port sw0-port4 addresses: 00:00:00:00:00:04 - lport sw0-port3 + port sw0-port3 addresses: 00:00:00:00:00:03 Using `ovn-sbctl` to view the state of the system, we can see that there are two @@ -464,34 +464,34 @@ The logical topology from `ovn-nbctl` should look like this. $ ovn-nbctl show lswitch 5a652488-cfba-4f3e-929d-00010cdfde40 (provnet1-2) - lport provnet1-2-physnet1 + port provnet1-2-physnet1 addresses: unknown - lport provnet1-2-port1 + port provnet1-2-port1 addresses: 00:00:00:00:00:02 lswitch 5829b60a-eda8-4d78-94f6-7017ff9efcf0 (provnet1-4) - lport provnet1-4-port1 + port provnet1-4-port1 addresses: 00:00:00:00:00:04 - lport provnet1-4-physnet1 + port provnet1-4-physnet1 addresses: unknown lswitch 06cbbcb6-38e3-418d-a81e-634ec9b54ad6 (provnet1-1) - lport provnet1-1-port1 + port provnet1-1-port1 addresses: 00:00:00:00:00:01 - lport provnet1-1-physnet1 + port provnet1-1-physnet1 addresses: unknown lswitch 9cba3b3b-59ae-4175-95f5-b6f1cd9c2afb (provnet1-3) - lport provnet1-3-physnet1 + port provnet1-3-physnet1 addresses: unknown - lport provnet1-3-port1 + port provnet1-3-port1 addresses: 00:00:00:00:00:03 `port1` on each logical switch represents a regular logical port for a VIF on a hypervisor. `physnet1` on each logical switch is the special `localnet` port. You can use `ovn-nbctl` to see that this port has a `type` and `options` set. - $ ovn-nbctl lport-get-type provnet1-1-physnet1 + $ ovn-nbctl lsp-get-type provnet1-1-physnet1 localnet - $ ovn-nbctl lport-get-options provnet1-1-physnet1 + $ ovn-nbctl lsp-get-options provnet1-1-physnet1 network_name=physnet1 The physical topology should reflect that there are two regular ports on each @@ -617,47 +617,47 @@ set to `101`. $ ovn-nbctl show lswitch 12ea93d0-694b-48e9-adef-d0ddd3ec4ac9 (provnet1-7-101) - lport provnet1-7-physnet1-101 + port provnet1-7-physnet1-101 parent: , tag:101 addresses: unknown - lport provnet1-7-101-port1 + port provnet1-7-101-port1 addresses: 00:00:00:00:00:07 lswitch c9a5ce3a-15ec-48ea-a898-416013463589 (provnet1-4) - lport provnet1-4-port1 + port provnet1-4-port1 addresses: 00:00:00:00:00:04 - lport provnet1-4-physnet1 + port provnet1-4-physnet1 addresses: unknown lswitch e07d4f7a-2085-4fbb-9937-d6192b79a397 (provnet1-1) - lport provnet1-1-physnet1 + port provnet1-1-physnet1 addresses: unknown - lport provnet1-1-port1 + port provnet1-1-port1 addresses: 00:00:00:00:00:01 lswitch 6c098474-0509-4219-bc9b-eb4e28dd1aeb (provnet1-2) - lport provnet1-2-physnet1 + port provnet1-2-physnet1 addresses: unknown - lport provnet1-2-port1 + port provnet1-2-port1 addresses: 00:00:00:00:00:02 lswitch 723c4684-5d58-4202-b8e3-4ba99ad5ed9e (provnet1-8-101) - lport provnet1-8-101-port1 + port provnet1-8-101-port1 addresses: 00:00:00:00:00:08 - lport provnet1-8-physnet1-101 + port provnet1-8-physnet1-101 parent: , tag:101 addresses: unknown lswitch 8444e925-ceb2-4b02-ac20-eb2e4cfb954d (provnet1-6-101) - lport provnet1-6-physnet1-101 + port provnet1-6-physnet1-101 parent: , tag:101 addresses: unknown - lport provnet1-6-101-port1 + port provnet1-6-101-port1 addresses: 00:00:00:00:00:06 lswitch e11e5605-7c46-4395-b28d-cff57451fc7e (provnet1-3) - lport provnet1-3-port1 + port provnet1-3-port1 addresses: 00:00:00:00:00:03 - lport provnet1-3-physnet1 + port provnet1-3-physnet1 addresses: unknown lswitch 0706b697-6c92-4d54-bc0a-db5bababb74a (provnet1-5-101) - lport provnet1-5-101-port1 + port provnet1-5-101-port1 addresses: 00:00:00:00:00:05 - lport provnet1-5-physnet1-101 + port provnet1-5-physnet1-101 parent: , tag:101 addresses: unknown diff --git a/tutorial/ovn/env1/add-third-port.sh b/tutorial/ovn/env1/add-third-port.sh index e2faab27c..06c496923 100755 --- a/tutorial/ovn/env1/add-third-port.sh +++ b/tutorial/ovn/env1/add-third-port.sh @@ -15,7 +15,7 @@ set -o xtrace -ovn-nbctl lport-add sw0 sw0-port3 -ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03 -ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-add sw0 sw0-port3 +ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03 ovs-vsctl add-port br-int lport3 -- set Interface lport3 external_ids:iface-id=sw0-port3 diff --git a/tutorial/ovn/env1/setup.sh b/tutorial/ovn/env1/setup.sh index 78657e94c..a89c0091e 100755 --- a/tutorial/ovn/env1/setup.sh +++ b/tutorial/ovn/env1/setup.sh @@ -23,18 +23,18 @@ set -o xtrace ovn-nbctl lswitch-add sw0 # Create two logical ports on "sw0". -ovn-nbctl lport-add sw0 sw0-port1 -ovn-nbctl lport-add sw0 sw0-port2 +ovn-nbctl lsp-add sw0 sw0-port1 +ovn-nbctl lsp-add sw0 sw0-port2 # Set a MAC address for each of the two logical ports. -ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02 # Set up port security for the two logical ports. This ensures that # the logical port mac address we have configured is the only allowed # source and destination mac address for these ports. -ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02 # Create ports on the local OVS bridge, br-int. When ovn-controller # sees these ports show up with an "iface-id" that matches the OVN diff --git a/tutorial/ovn/env2/setup.sh b/tutorial/ovn/env2/setup.sh index 4b8df762e..370882f2c 100755 --- a/tutorial/ovn/env2/setup.sh +++ b/tutorial/ovn/env2/setup.sh @@ -17,18 +17,18 @@ set -o xtrace ovn-nbctl lswitch-add sw0 ovn-nbctl lswitch-add sw1 -ovn-nbctl lport-add sw0 sw0-port1 -ovn-nbctl lport-add sw0 sw0-port2 -ovn-nbctl lport-add sw1 sw1-port1 -ovn-nbctl lport-add sw1 sw1-port2 -ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-addresses sw1-port1 00:00:00:00:00:03 -ovn-nbctl lport-set-addresses sw1-port2 00:00:00:00:00:04 -ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-port-security sw1-port1 00:00:00:00:00:03 -ovn-nbctl lport-set-port-security sw1-port2 00:00:00:00:00:04 +ovn-nbctl lsp-add sw0 sw0-port1 +ovn-nbctl lsp-add sw0 sw0-port2 +ovn-nbctl lsp-add sw1 sw1-port1 +ovn-nbctl lsp-add sw1 sw1-port2 +ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-addresses sw1-port1 00:00:00:00:00:03 +ovn-nbctl lsp-set-addresses sw1-port2 00:00:00:00:00:04 +ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-port-security sw1-port1 00:00:00:00:00:03 +ovn-nbctl lsp-set-port-security sw1-port2 00:00:00:00:00:04 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1 ovs-vsctl add-port br-int lport2 -- set Interface lport2 external_ids:iface-id=sw0-port2 diff --git a/tutorial/ovn/env3/setup.sh b/tutorial/ovn/env3/setup.sh index 7a7f0a6e2..fc214a7b4 100755 --- a/tutorial/ovn/env3/setup.sh +++ b/tutorial/ovn/env3/setup.sh @@ -17,20 +17,20 @@ set -o xtrace ovn-nbctl lswitch-add sw0 -ovn-nbctl lport-add sw0 sw0-port1 -ovn-nbctl lport-add sw0 sw0-port2 -ovn-nbctl lport-add sw0 sw0-port3 -ovn-nbctl lport-add sw0 sw0-port4 - -ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03 -ovn-nbctl lport-set-addresses sw0-port4 00:00:00:00:00:04 - -ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03 -ovn-nbctl lport-set-port-security sw0-port4 00:00:00:00:00:04 +ovn-nbctl lsp-add sw0 sw0-port1 +ovn-nbctl lsp-add sw0 sw0-port2 +ovn-nbctl lsp-add sw0 sw0-port3 +ovn-nbctl lsp-add sw0 sw0-port4 + +ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-set-addresses sw0-port4 00:00:00:00:00:04 + +ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-set-port-security sw0-port4 00:00:00:00:00:04 # Bind sw0-port1 and sw0-port2 to the local chassis ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1 diff --git a/tutorial/ovn/env4/setup2.sh b/tutorial/ovn/env4/setup2.sh index 361ec99f4..3daeff67c 100755 --- a/tutorial/ovn/env4/setup2.sh +++ b/tutorial/ovn/env4/setup2.sh @@ -30,14 +30,14 @@ ovn-sbctl chassis-add fakechassis geneve 127.0.0.1 for n in 1 2 3 4; do ovn-nbctl lswitch-add provnet1-$n - ovn-nbctl lport-add provnet1-$n provnet1-$n-port1 - ovn-nbctl lport-set-addresses provnet1-$n-port1 00:00:00:00:00:0$n - ovn-nbctl lport-set-port-security provnet1-$n-port1 00:00:00:00:00:0$n - - ovn-nbctl lport-add provnet1-$n provnet1-$n-physnet1 - ovn-nbctl lport-set-addresses provnet1-$n-physnet1 unknown - ovn-nbctl lport-set-type provnet1-$n-physnet1 localnet - ovn-nbctl lport-set-options provnet1-$n-physnet1 network_name=physnet1 + ovn-nbctl lsp-add provnet1-$n provnet1-$n-port1 + ovn-nbctl lsp-set-addresses provnet1-$n-port1 00:00:00:00:00:0$n + ovn-nbctl lsp-set-port-security provnet1-$n-port1 00:00:00:00:00:0$n + + ovn-nbctl lsp-add provnet1-$n provnet1-$n-physnet1 + ovn-nbctl lsp-set-addresses provnet1-$n-physnet1 unknown + ovn-nbctl lsp-set-type provnet1-$n-physnet1 localnet + ovn-nbctl lsp-set-options provnet1-$n-physnet1 network_name=physnet1 done ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=provnet1-1-port1 diff --git a/tutorial/ovn/env5/setup.sh b/tutorial/ovn/env5/setup.sh index f73a52df0..7690aacff 100755 --- a/tutorial/ovn/env5/setup.sh +++ b/tutorial/ovn/env5/setup.sh @@ -33,27 +33,27 @@ ovn-sbctl chassis-add fakechassis geneve 127.0.0.1 for n in 1 2 3 4 5 6 7 8; do if [ $n -gt 4 ] ; then lswitch_name="provnet1-$n-101" - lport_name="$lswitch_name-port1" + lsp_name="$lswitch_name-port1" else lswitch_name="provnet1-$n" fi ovn-nbctl lswitch-add $lswitch_name - lport_name="$lswitch_name-port1" - ovn-nbctl lport-add $lswitch_name $lport_name - ovn-nbctl lport-set-addresses $lport_name 00:00:00:00:00:0$n - ovn-nbctl lport-set-port-security $lport_name 00:00:00:00:00:0$n + lsp_name="$lswitch_name-port1" + ovn-nbctl lsp-add $lswitch_name $lsp_name + ovn-nbctl lsp-set-addresses $lsp_name 00:00:00:00:00:0$n + ovn-nbctl lsp-set-port-security $lsp_name 00:00:00:00:00:0$n if [ $n -gt 4 ] ; then - lport_name="provnet1-$n-physnet1-101" - ovn-nbctl lport-add $lswitch_name $lport_name "" 101 + lsp_name="provnet1-$n-physnet1-101" + ovn-nbctl lsp-add $lswitch_name $lsp_name "" 101 else - lport_name="provnet1-$n-physnet1" - ovn-nbctl lport-add $lswitch_name $lport_name + lsp_name="provnet1-$n-physnet1" + ovn-nbctl lsp-add $lswitch_name $lsp_name fi - ovn-nbctl lport-set-addresses $lport_name unknown - ovn-nbctl lport-set-type $lport_name localnet - ovn-nbctl lport-set-options $lport_name network_name=physnet1 + ovn-nbctl lsp-set-addresses $lsp_name unknown + ovn-nbctl lsp-set-type $lsp_name localnet + ovn-nbctl lsp-set-options $lsp_name network_name=physnet1 done ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=provnet1-1-port1 diff --git a/tutorial/ovn/env6/setup.sh b/tutorial/ovn/env6/setup.sh index 78657e94c..a89c0091e 100755 --- a/tutorial/ovn/env6/setup.sh +++ b/tutorial/ovn/env6/setup.sh @@ -23,18 +23,18 @@ set -o xtrace ovn-nbctl lswitch-add sw0 # Create two logical ports on "sw0". -ovn-nbctl lport-add sw0 sw0-port1 -ovn-nbctl lport-add sw0 sw0-port2 +ovn-nbctl lsp-add sw0 sw0-port1 +ovn-nbctl lsp-add sw0 sw0-port2 # Set a MAC address for each of the two logical ports. -ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02 # Set up port security for the two logical ports. This ensures that # the logical port mac address we have configured is the only allowed # source and destination mac address for these ports. -ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02 # Create ports on the local OVS bridge, br-int. When ovn-controller # sees these ports show up with an "iface-id" that matches the OVN diff --git a/tutorial/ovn/env7/add-container-ports.sh b/tutorial/ovn/env7/add-container-ports.sh index 482c969cb..c7308492b 100755 --- a/tutorial/ovn/env7/add-container-ports.sh +++ b/tutorial/ovn/env7/add-container-ports.sh @@ -19,14 +19,14 @@ set -o xtrace ovn-nbctl lswitch-add csw0 # create a container port with parent set to sw0-port1 -ovn-nbctl lport-add csw0 csw0-cport1 sw0-port1 42 -ovn-nbctl lport-set-addresses csw0-cport1 00:00:00:00:01:01 -ovn-nbctl lport-set-port-security csw0-cport1 00:00:00:00:01:01 +ovn-nbctl lsp-add csw0 csw0-cport1 sw0-port1 42 +ovn-nbctl lsp-set-addresses csw0-cport1 00:00:00:00:01:01 +ovn-nbctl lsp-set-port-security csw0-cport1 00:00:00:00:01:01 # create another container port with parent set to sw0-port1 -ovn-nbctl lport-add csw0 csw0-cport2 sw0-port2 43 -ovn-nbctl lport-set-addresses csw0-cport2 00:00:00:00:01:02 -ovn-nbctl lport-set-port-security csw0-cport2 00:00:00:00:01:02 +ovn-nbctl lsp-add csw0 csw0-cport2 sw0-port2 43 +ovn-nbctl lsp-set-addresses csw0-cport2 00:00:00:00:01:02 +ovn-nbctl lsp-set-port-security csw0-cport2 00:00:00:00:01:02 # Make lport1 as a patch port, other end connected to br-vmport1 diff --git a/tutorial/ovn/env7/setup.sh b/tutorial/ovn/env7/setup.sh index 2df0f0ea3..05fd5c59b 100755 --- a/tutorial/ovn/env7/setup.sh +++ b/tutorial/ovn/env7/setup.sh @@ -19,17 +19,17 @@ set -o xtrace ovn-nbctl lswitch-add sw0 # Create two logical ports on "sw0". -ovn-nbctl lport-add sw0 sw0-port1 -ovn-nbctl lport-add sw0 sw0-port2 -ovn-nbctl lport-add sw0 sw0-port3 +ovn-nbctl lsp-add sw0 sw0-port1 +ovn-nbctl lsp-add sw0 sw0-port2 +ovn-nbctl lsp-add sw0 sw0-port3 -ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03 -ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01 -ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02 -ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03 +ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01 +ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02 +ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1 ovs-vsctl add-port br-int lport2 -- set Interface lport2 external_ids:iface-id=sw0-port2 diff --git a/utilities/ovs-sim.1.xml b/utilities/ovs-sim.1.xml index 9a4ffddc5..2e95a9234 100644 --- a/utilities/ovs-sim.1.xml +++ b/utilities/ovs-sim.1.xml @@ -275,8 +275,8 @@ for i in 0 1; do ovs-vsctl add-br br-phys ovn_attach n1 br-phys 192.168.0.`expr $i + 1` ovs-vsctl add-port br-int vif$i -- set Interface vif$i external-ids:iface-id=lp$i - ovn-nbctl lport-add lsw0 lp$i - ovn-nbctl lport-set-addresses lp$i f0:00:00:00:00:0$i + ovn-nbctl lsp-add lsw0 lp$i + ovn-nbctl lsp-set-addresses lp$i f0:00:00:00:00:0$i done </pre> @@ -306,8 +306,8 @@ wait for i in `seq $n`; do yy=$(printf %02x $(expr $i / 256)) xx=$(printf $02x $(expr $i % 256)) - ovn-nbctl lport-add br0 lp$i - ovn-nbctl lport-set-addresses lp$i f0:00:00:00:$yy:$xx + ovn-nbctl lsp-add br0 lp$i + ovn-nbctl lsp-set-addresses lp$i f0:00:00:00:$yy:$xx done </pre> @@ -317,7 +317,7 @@ done </p> <pre> -watch 'for i in `seq $n`; do if test `ovn-nbctl lport-get-up lp$i` != up; then echo $i; fi; done' +watch 'for i in `seq $n`; do if test `ovn-nbctl lsp-get-up lp$i` != up; then echo $i; fi; done' </pre> </manpage> |