diff options
| author | Felix Fietkau <nbd@nbd.name> | 2021-09-02 20:26:33 +0200 |
|---|---|---|
| committer | Felix Fietkau <nbd@nbd.name> | 2021-09-03 14:16:11 +0200 |
| commit | 5ba9744aac6d42da1e56357aca951b52f86cfacb (patch) | |
| tree | 0ae045f0f4d9d4bb5abe484b826c3b74ec34232f /config | |
| parent | 300b1220fab38600f102bb8cfcc59a29ce41b095 (diff) | |
| download | netifd-5ba9744aac6d42da1e56357aca951b52f86cfacb.tar.gz | |
device: add support for configuring bonding devices
Supported options:
- ports: member devices
- policy: bonding policy
supported values:
- balance-rr
- active-backup
- balance-xor
- broadcast
- 802.3ad
- balance-tlb
- balance-alb
- xmit_hash_policy: slave selection tx hash policy
supported values:
- layer2
- layer2+3
- layer3+4
- encap2+3
- encap3+4
- all_ports_active: allow receiving on inactive ports
- min_links: minimum number of active links
- ad_actor_system: LACPDU exchange MAC address
- ad_actor_sys_prio: LACPDU priority value
- ad_select: 802.3ad aggregation logic
supported values:
- stable
- bandwidth
- count
- lacp_rate: 802.3ad LACPDU packet rate
supported values:
- slow (every 30 seconds)
- fast (every second)
- packets_per_port: number of packets before switching
ports (balance-rr mode).
- lp_interval: number of seconds between sent learning packets
- dynamic_lb: distribute traffic according to port load
- resend_igmp: number if IGMP membership updates after failover event
- num_peer_notif: number of tx unsolicited ARP/NA after failover event
- primary: name of the primary port
- primary_reselect: primary port reselection policy
supported values:
- always
- better
- failure
- failover_mac: MAC address selection policy
supported values:
- none
- active
- follow
- monitor_mode: select ARP or MII link monitor:
supported values:
- arp
- mii
- monitor_interval: link monitor update interval (msec)
- arp_target: ARP monitor target IP address (list)
- arp_all_targets: all targets must be reachable to consider the link valid
- arp_validate: ARP validation policy
supported values:
- none
- active
- backup
- all
- filter
- filter_active
- filter_backup
- use_carrier: use carrier status instead of MII ioctl result
- updelay: delay before enabling port after MII link up event (msec)
- downdelay: delay before disabling port after MII link down event (msec)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Diffstat (limited to 'config')
| -rw-r--r-- | config/network | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/config/network b/config/network index b2985d3..4987138 100644 --- a/config/network +++ b/config/network @@ -11,11 +11,18 @@ config device option type bridge list ifname eth0.1 list ifname eth0.2 + list ifname bond0 option mtu 1500 config device option name dummy +config device + option name bond0 + option type bonding + list ports eth0.123 + list ports eth0.124 + config interface lan option ifname 'br-lan' option proto static |