summaryrefslogtreecommitdiff
path: root/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch')
-rw-r--r--target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch307
1 files changed, 0 insertions, 307 deletions
diff --git a/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch b/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
deleted file mode 100644
index fd7d6a5f11..0000000000
--- a/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From 2961f69f151c0a6771f55cef46398fe49ca20902 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:32 +0100
-Subject: [PATCH] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early
- DTS files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-They don't descibe hardware fully yet but it's enough to boot a system.
-
-Some missing blocks:
-1. PMC (Power Management Controller?)
-2. Ethernet
-3. Crypto
-4. Thermal
-
-Asus DTS is missing defining full NAND partitions layout and buttons.
-
-Further changes will fill those gaps as soon as required bindings will
-be found / tested / added.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/Makefile | 1 +
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 2 +
- .../bcm4908/bcm4908-asus-gt-ac5300.dts | 66 +++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 187 ++++++++++++++++++
- 4 files changed, 256 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -5,5 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp
- bcm2837-rpi-3-b-plus.dtb \
- bcm2837-rpi-cm3-io3.dtb
-
-+subdir-y += bcm4908
- subdir-y += northstar2
- subdir-y += stingray
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+ compatible = "asus,gt-ac5300", "brcm,bcm4908";
-+ model = "Asus GT-AC5300";
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x00 0x00 0x00 0x40000000>;
-+ };
-+
-+ gpio-keys-polled {
-+ compatible = "gpio-keys-polled";
-+ poll-interval = <100>;
-+
-+ wifi {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ brightness {
-+ label = "LEDs";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&nandcs {
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-on-flash-bbt;
-+ brcm,nand-has-wp;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "cferom";
-+ reg = <0x0 0x100000>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -0,0 +1,187 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/dts-v1/;
-+
-+/ {
-+ interrupt-parent = <&gic>;
-+
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu0: cpu@0 {
-+ device_type = "cpu";
-+ compatible = "brcm,brahma-b53";
-+ reg = <0x0>;
-+ next-level-cache = <&l2>;
-+ };
-+
-+ cpu1: cpu@1 {
-+ device_type = "cpu";
-+ compatible = "brcm,brahma-b53";
-+ reg = <0x1>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0xfff8>;
-+ next-level-cache = <&l2>;
-+ };
-+
-+ cpu2: cpu@2 {
-+ device_type = "cpu";
-+ compatible = "brcm,brahma-b53";
-+ reg = <0x2>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0xfff8>;
-+ next-level-cache = <&l2>;
-+ };
-+
-+ cpu3: cpu@3 {
-+ device_type = "cpu";
-+ compatible = "brcm,brahma-b53";
-+ reg = <0x3>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0xfff8>;
-+ next-level-cache = <&l2>;
-+ };
-+
-+ l2: l2-cache0 {
-+ compatible = "cache";
-+ };
-+ };
-+
-+ axi@81000000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x00 0x00 0x81000000 0x4000>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ #address-cells = <0>;
-+ interrupt-controller;
-+ reg = <0x1000 0x1000>,
-+ <0x2000 0x2000>;
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ pmu {
-+ compatible = "arm,cortex-a53-pmu";
-+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-+ };
-+
-+ clocks {
-+ periph_clk: periph_clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <50000000>;
-+ clock-output-names = "periph";
-+ };
-+ };
-+
-+ soc {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x00 0x00 0x80000000 0x10000>;
-+
-+ usb@c300 {
-+ compatible = "generic-ehci";
-+ reg = <0xc300 0x100>;
-+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ usb@c400 {
-+ compatible = "generic-ohci";
-+ reg = <0xc400 0x100>;
-+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ usb@d000 {
-+ compatible = "generic-xhci";
-+ reg = <0xd000 0x8c8>;
-+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ bus@ff800000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x00 0x00 0xff800000 0x3000>;
-+
-+ timer: timer@400 {
-+ compatible = "brcm,bcm6328-timer", "syscon";
-+ reg = <0x400 0x3c>;
-+ };
-+
-+ gpio0: gpio-controller@500 {
-+ compatible = "brcm,bcm6345-gpio";
-+ reg-names = "dirout", "dat";
-+ reg = <0x500 0x28>, <0x528 0x28>;
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+ };
-+
-+ uart0: serial@640 {
-+ compatible = "brcm,bcm6345-uart";
-+ reg = <0x640 0x18>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&periph_clk>;
-+ clock-names = "periph";
-+ status = "okay";
-+ };
-+
-+ nand@1800 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+ reg = <0x1800 0x600>, <0x2000 0x10>;
-+ reg-names = "nand", "nand-int-base";
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "nand";
-+ status = "okay";
-+
-+ nandcs: nandcs@0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ };
-+ };
-+
-+ reboot {
-+ compatible = "syscon-reboot";
-+ regmap = <&timer>;
-+ offset = <0x34>;
-+ mask = <1>;
-+ };
-+ };
-+};
View Lorry Controller Status