diff options
Diffstat (limited to 'target/linux/bcm4908/patches-5.15')
21 files changed, 48 insertions, 3327 deletions
diff --git a/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch b/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch index 07a0c5f8d0..aaa5241c44 100644 --- a/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch +++ b/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch @@ -11,11 +11,11 @@ This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +- + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -298,7 +298,7 @@ status = "okay"; }; diff --git a/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch b/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch deleted file mode 100644 index 9e0236ad0f..0000000000 --- a/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch +++ /dev/null @@ -1,81 +0,0 @@ -From d0e68d354f345873e15876a7b35be1baaf5e3ec9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 5 Nov 2021 11:14:13 +0100 -Subject: [PATCH] arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB -NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet -ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known -how it's wired up). - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 + - .../bcm4908/bcm4908-netgear-raxe500.dts | 50 +++++++++++++++++++ - 2 files changed, 51 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts - ---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile -@@ -2,3 +2,4 @@ - dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb - dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb - dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb -+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts -@@ -0,0 +1,50 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include "bcm4908.dtsi" -+ -+/ { -+ compatible = "netgear,raxe500", "brcm,bcm4908"; -+ model = "Netgear RAXE500"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x40000000>; -+ }; -+}; -+ -+&ehci { -+ status = "okay"; -+}; -+ -+&ohci { -+ status = "okay"; -+}; -+ -+&xhci { -+ status = "okay"; -+}; -+ -+&ports { -+ port@0 { -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan1"; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ phy-mode = "internal"; -+ phy-handle = <&phy12>; -+ label = "wan"; -+ }; -+}; diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch index 8560b8ee88..70b4dc216d 100644 --- a/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch @@ -11,11 +11,11 @@ Describe pinmux block with its maps. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 135 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 135 ++++++++++++++++++ 1 file changed, 135 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -289,6 +289,141 @@ gpio-controller; }; diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch index a0329d3276..47d680d759 100644 --- a/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch @@ -12,11 +12,11 @@ binding which matches the first SoC with that block. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++ + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -278,6 +278,15 @@ twd: timer-mfd@400 { compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch index d86da69893..a92ee6e3e7 100644 --- a/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch @@ -11,11 +11,11 @@ BCM4908 uses the same I2C hw as BCM63xx / BCM67xx / BCM68xx SoCs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++ + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -458,6 +458,15 @@ }; }; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit deleted file mode 100644 index 908b8c12dc..0000000000 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit +++ /dev/null @@ -1,199 +0,0 @@ -From 076dcedc6628c6bf92bd17bfcf8fb7b1af62bfb6 Mon Sep 17 00:00:00 2001 -From: William Zhang <william.zhang@broadcom.com> -Date: Wed, 1 Jun 2022 15:56:51 -0700 -Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63158 - -Add DTS for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the -SoC description DTS header and bcm963158.dts is a simple DTS file for -Broadcom BCM963158 Reference board that only enable the UART port. - -Signed-off-by: William Zhang <william.zhang@broadcom.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/Makefile | 1 + - arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 2 + - .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 128 ++++++++++++++++++ - .../boot/dts/broadcom/bcmbca/bcm963158.dts | 30 ++++ - 4 files changed, 161 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/Makefile - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -7,5 +7,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp - bcm2837-rpi-cm3-io3.dtb - - subdir-y += bcm4908 -+subdir-y += bcmbca - subdir-y += northstar2 - subdir-y += stingray ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -0,0 +1,2 @@ -+# SPDX-License-Identifier: GPL-2.0 -+dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi -@@ -0,0 +1,128 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+#include <dt-bindings/interrupt-controller/irq.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+ -+/ { -+ compatible = "brcm,bcm63158", "brcm,bcmbca"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ interrupt-parent = <&gic>; -+ -+ cpus { -+ #address-cells = <2>; -+ #size-cells = <0>; -+ -+ B53_0: cpu@0 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x0>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_1: cpu@1 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x1>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_2: cpu@2 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x2>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_3: cpu@3 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x3>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ L2_0: l2-cache0 { -+ compatible = "cache"; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu: pmu { -+ compatible = "arm,cortex-a53-pmu"; -+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&B53_0>, <&B53_1>, -+ <&B53_2>, <&B53_3>; -+ }; -+ -+ clocks: clocks { -+ periph_clk: periph-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <200000000>; -+ }; -+ uart_clk: uart-clk { -+ compatible = "fixed-factor-clock"; -+ #clock-cells = <0>; -+ clocks = <&periph_clk>; -+ clock-div = <4>; -+ clock-mult = <1>; -+ }; -+ }; -+ -+ psci { -+ compatible = "arm,psci-0.2"; -+ method = "smc"; -+ }; -+ -+ axi@81000000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0x81000000 0x8000>; -+ -+ gic: interrupt-controller@1000 { -+ compatible = "arm,gic-400"; -+ #interrupt-cells = <3>; -+ interrupt-controller; -+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; -+ reg = <0x1000 0x1000>, -+ <0x2000 0x2000>, -+ <0x4000 0x2000>, -+ <0x6000 0x2000>; -+ }; -+ }; -+ -+ bus@ff800000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0xff800000 0x800000>; -+ -+ uart0: serial@12000 { -+ compatible = "arm,pl011", "arm,primecell"; -+ reg = <0x12000 0x1000>; -+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&uart_clk>, <&uart_clk>; -+ clock-names = "uartclk", "apb_pclk"; -+ status = "disabled"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts -@@ -0,0 +1,30 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm63158.dtsi" -+ -+/ { -+ model = "Broadcom BCM963158 Reference Board"; -+ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x0 0x0 0x0 0x08000000>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit deleted file mode 100644 index 5cdb9d1df1..0000000000 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit +++ /dev/null @@ -1,191 +0,0 @@ -From 1ba56aeb391401c4cb2126c39f90b3cdbfabdb3f Mon Sep 17 00:00:00 2001 -From: William Zhang <william.zhang@broadcom.com> -Date: Wed, 1 Jun 2022 13:17:34 -0700 -Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM4912 - -Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the -SoC description DTS header and bcm94912.dts is a simple DTS file for -Broadcom BCM94912 Reference board that only enable the UART port. - -Signed-off-by: William Zhang <william.zhang@broadcom.com> -Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- - .../boot/dts/broadcom/bcmbca/bcm4912.dtsi | 128 ++++++++++++++++++ - .../boot/dts/broadcom/bcmbca/bcm94912.dts | 30 ++++ - 3 files changed, 160 insertions(+), 1 deletion(-) - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts - ---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -1,2 +1,3 @@ - # SPDX-License-Identifier: GPL-2.0 --dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb -+dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ -+ bcm963158.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi -@@ -0,0 +1,128 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+#include <dt-bindings/interrupt-controller/irq.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+ -+/ { -+ compatible = "brcm,bcm4912", "brcm,bcmbca"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ interrupt-parent = <&gic>; -+ -+ cpus { -+ #address-cells = <2>; -+ #size-cells = <0>; -+ -+ B53_0: cpu@0 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x0>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_1: cpu@1 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x1>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_2: cpu@2 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x2>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_3: cpu@3 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x3>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ L2_0: l2-cache0 { -+ compatible = "cache"; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu: pmu { -+ compatible = "arm,cortex-a53-pmu"; -+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&B53_0>, <&B53_1>, -+ <&B53_2>, <&B53_3>; -+ }; -+ -+ clocks: clocks { -+ periph_clk: periph-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <200000000>; -+ }; -+ uart_clk: uart-clk { -+ compatible = "fixed-factor-clock"; -+ #clock-cells = <0>; -+ clocks = <&periph_clk>; -+ clock-div = <4>; -+ clock-mult = <1>; -+ }; -+ }; -+ -+ psci { -+ compatible = "arm,psci-0.2"; -+ method = "smc"; -+ }; -+ -+ axi@81000000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0x81000000 0x8000>; -+ -+ gic: interrupt-controller@1000 { -+ compatible = "arm,gic-400"; -+ #interrupt-cells = <3>; -+ interrupt-controller; -+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; -+ reg = <0x1000 0x1000>, -+ <0x2000 0x2000>, -+ <0x4000 0x2000>, -+ <0x6000 0x2000>; -+ }; -+ }; -+ -+ bus@ff800000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0xff800000 0x800000>; -+ -+ uart0: serial@12000 { -+ compatible = "arm,pl011", "arm,primecell"; -+ reg = <0x12000 0x1000>; -+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&uart_clk>, <&uart_clk>; -+ clock-names = "uartclk", "apb_pclk"; -+ status = "disabled"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts -@@ -0,0 +1,30 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4912.dtsi" -+ -+/ { -+ model = "Broadcom BCM94912 Reference Board"; -+ compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x0 0x0 0x0 0x08000000>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit deleted file mode 100644 index f10a44f890..0000000000 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit +++ /dev/null @@ -1,184 +0,0 @@ -From e663e06bd3f21e64bc2163910f626af68add6308 Mon Sep 17 00:00:00 2001 -From: Anand Gore <anand.gore@broadcom.com> -Date: Wed, 1 Jun 2022 13:19:56 -0700 -Subject: [PATCH] ARM64: dts: Add DTS files for bcmbca SoC BCM6858 - -Add DTS for ARMv8 based broadband SoC BCM6858. bcm6858.dtsi is the SoC -description DTS header and bcm96858.dts is a simple DTS file for -Broadcom BCM96858 Reference board that only enables the UART port. - -Signed-off-by: Anand Gore <anand.gore@broadcom.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- - .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 121 ++++++++++++++++++ - .../boot/dts/broadcom/bcmbca/bcm96858.dts | 30 +++++ - 3 files changed, 153 insertions(+), 1 deletion(-) - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts - ---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -1,3 +1,4 @@ - # SPDX-License-Identifier: GPL-2.0 - dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ -- bcm963158.dtb -+ bcm963158.dtb \ -+ bcm96858.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi -@@ -0,0 +1,121 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+#include <dt-bindings/interrupt-controller/irq.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+ -+/ { -+ compatible = "brcm,bcm6858", "brcm,bcmbca"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ interrupt-parent = <&gic>; -+ -+ cpus { -+ #address-cells = <2>; -+ #size-cells = <0>; -+ -+ B53_0: cpu@0 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x0>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_1: cpu@1 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x1>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_2: cpu@2 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x2>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ -+ B53_3: cpu@3 { -+ compatible = "brcm,brahma-b53"; -+ device_type = "cpu"; -+ reg = <0x0 0x3>; -+ next-level-cache = <&L2_0>; -+ enable-method = "psci"; -+ }; -+ L2_0: l2-cache0 { -+ compatible = "cache"; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu: pmu { -+ compatible = "arm,armv8-pmuv3"; -+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&B53_0>, <&B53_1>, -+ <&B53_2>, <&B53_3>; -+ }; -+ -+ clocks: clocks { -+ periph_clk:periph-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <200000000>; -+ }; -+ }; -+ -+ psci { -+ compatible = "arm,psci-0.2"; -+ method = "smc"; -+ }; -+ -+ axi@81000000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0x81000000 0x8000>; -+ -+ gic: interrupt-controller@1000 { -+ compatible = "arm,gic-400"; -+ #interrupt-cells = <3>; -+ interrupt-controller; -+ reg = <0x1000 0x1000>, /* GICD */ -+ <0x2000 0x2000>, /* GICC */ -+ <0x4000 0x2000>, /* GICH */ -+ <0x6000 0x2000>; /* GICV */ -+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_HIGH)>; -+ }; -+ }; -+ -+ bus@ff800000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0x0 0xff800000 0x62000>; -+ -+ uart0: serial@640 { -+ compatible = "brcm,bcm6345-uart"; -+ reg = <0x640 0x18>; -+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&periph_clk>; -+ clock-names = "refclk"; -+ status = "disabled"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts -@@ -0,0 +1,30 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright 2022 Broadcom Ltd. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm6858.dtsi" -+ -+/ { -+ model = "Broadcom BCM96858 Reference Board"; -+ compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x0 0x0 0x0 0x08000000>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit index 793c5af738..7cd13e5c22 100644 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit @@ -19,9 +19,9 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -1,4 +1,5 @@ - # SPDX-License-Identifier: GPL-2.0 - dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ +@@ -7,4 +7,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ bcm963158.dtb \ - bcm96858.dtb + bcm96858.dtb \ diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit index 0fdafb7f17..2e0da2e54a 100644 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit @@ -19,8 +19,8 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -2,4 +2,5 @@ - dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ +@@ -8,4 +8,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm94912.dtb \ bcm963158.dtb \ bcm96858.dtb \ - bcm963146.dtb diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit index 58af85a68c..6be8ab8ee4 100644 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit @@ -19,7 +19,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dt +@@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ bcm963158.dtb \ bcm96858.dtb \ bcm963146.dtb \ diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit index d0d6151957..987da135d7 100644 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit @@ -9,12 +9,12 @@ The node names should be generic and DT schema expects certain pattern Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org --- - .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++---- - .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++---- + .../broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++---- + .../boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -83,25 +83,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; @@ -45,8 +45,8 @@ Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linar label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -18,25 +18,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit index 59fbeea385..95540d3aab 100644 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit @@ -11,11 +11,11 @@ Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++ + arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi @@ -17,6 +17,14 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit deleted file mode 100644 index 6f71c8b5fb..0000000000 --- a/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit +++ /dev/null @@ -1,54 +0,0 @@ -From f3f575c4bef95384e68de552c7b29938fd0d9201 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 13 Jul 2022 22:03:51 +0200 -Subject: [PATCH] arm64: dts: Add base DTS file for bcmbca device Asus - GT-AX6000 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Acked-by: William Zhang <william.zhang@broadcom.com> -Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 +++- - .../bcmbca/bcm4912-asus-gt-ax6000.dts | 19 +++++++++++++++++++ - 2 files changed, 22 insertions(+), 1 deletion(-) - create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts - ---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -1,5 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 --dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ -+dtb-$(CONFIG_ARCH_BCMBCA) += \ -+ bcm4912-asus-gt-ax6000.dtb \ -+ bcm94912.dtb \ - bcm963158.dtb \ - bcm96858.dtb \ - bcm963146.dtb \ ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts -@@ -0,0 +1,19 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+/dts-v1/; -+ -+#include "bcm4912.dtsi" -+ -+/ { -+ compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca"; -+ model = "Asus GT-AX6000"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x40000000>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch index 437249f2cb..69b1522268 100644 --- a/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch @@ -12,11 +12,11 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220718132100.13277-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 75 +++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 75 +++++++++++++++++++ 1 file changed, 75 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -352,6 +352,61 @@ groups = "led_9_grp_a"; }; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch index c890340893..28641ab788 100644 --- a/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch @@ -13,11 +13,11 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220718132100.13277-2-zajec5@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++++++ + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -517,6 +517,14 @@ status = "okay"; }; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch index 3888efb66b..f4c7d8c489 100644 --- a/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch @@ -12,11 +12,11 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - .../bcm4908/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++ + .../bcmbca/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -2,6 +2,7 @@ #include <dt-bindings/gpio/gpio.h> diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch index d4b7a983de..8f9d3604cb 100644 --- a/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch @@ -14,14 +14,14 @@ Acked-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +- - .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 2 +- - arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +- - .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +- + arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 2 +- + .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 2 +- + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 2 +- + .../arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" @@ -31,8 +31,8 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> model = "Netgear R8000P"; memory@0 { ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" @@ -42,8 +42,8 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> model = "TP-Link Archer C2300 V1"; memory@0 { ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -7,7 +7,7 @@ #include "bcm4908.dtsi" @@ -53,8 +53,8 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> model = "Asus GT-AC5300"; memory@0 { ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts @@ -3,7 +3,7 @@ #include "bcm4908.dtsi" diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch deleted file mode 100644 index 4a8279a82e..0000000000 --- a/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch +++ /dev/null @@ -1,2507 +0,0 @@ -From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001 -From: William Zhang <william.zhang@broadcom.com> -Date: Wed, 3 Aug 2022 10:54:50 -0700 -Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder - -As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts -files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the -BCM4908 board dts. Delete bcm4908 folder and its makefile as well. - -Signed-off-by: William Zhang <william.zhang@broadcom.com> -Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/Makefile | 1 - - arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 ----- - arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++ - .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0 - .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0 - .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0 - .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0 - .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0 - .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0 - 9 files changed, 4 insertions(+), 6 deletions(-) - delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%) - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%) - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%) - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%) - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%) - rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%) - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -6,7 +6,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp - bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb - --subdir-y += bcm4908 - subdir-y += bcmbca - subdir-y += northstar2 - subdir-y += stingray ---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile -+++ /dev/null -@@ -1,5 +0,0 @@ --# SPDX-License-Identifier: GPL-2.0 --dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb --dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb --dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb --dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb ---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile -@@ -1,5 +1,9 @@ - # SPDX-License-Identifier: GPL-2.0 - dtb-$(CONFIG_ARCH_BCMBCA) += \ -+ bcm4906-netgear-r8000p.dtb \ -+ bcm4906-tplink-archer-c2300-v1.dtb \ -+ bcm4908-asus-gt-ac5300.dtb \ -+ bcm4908-netgear-raxe500.dtb \ - bcm4912-asus-gt-ax6000.dtb \ - bcm94912.dtb \ - bcm963158.dtb \ ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts -+++ /dev/null -@@ -1,157 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include <dt-bindings/gpio/gpio.h> --#include <dt-bindings/input/input.h> --#include <dt-bindings/leds/common.h> -- --#include "bcm4906.dtsi" -- --/ { -- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; -- model = "Netgear R8000P"; -- -- memory@0 { -- device_type = "memory"; -- reg = <0x00 0x00 0x00 0x20000000>; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- led-power-white { -- function = LED_FUNCTION_POWER; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; -- }; -- -- led-power-amber { -- function = LED_FUNCTION_POWER; -- color = <LED_COLOR_ID_AMBER>; -- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; -- }; -- -- led-wps { -- function = LED_FUNCTION_WPS; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; -- }; -- -- led-2ghz { -- function = "2ghz"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; -- }; -- -- led-5ghz-1 { -- function = "5ghz-1"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -- }; -- -- led-5ghz-2 { -- function = "5ghz-2"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -- }; -- -- led-usb2 { -- function = "usb2"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; -- }; -- -- led-usb3 { -- function = "usb3"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; -- }; -- -- led-wifi { -- function = "wifi"; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; -- }; -- }; --}; -- --&enet { -- nvmem-cells = <&base_mac_addr>; -- nvmem-cell-names = "mac-address"; --}; -- --&usb_phy { -- brcm,ioc = <1>; -- status = "okay"; --}; -- --&ehci { -- status = "okay"; --}; -- --&ohci { -- status = "okay"; --}; -- --&xhci { -- status = "okay"; --}; -- --&ports { -- port@0 { -- label = "lan4"; -- }; -- -- port@1 { -- label = "lan3"; -- }; -- -- port@2 { -- label = "lan2"; -- }; -- -- port@3 { -- label = "lan1"; -- }; -- -- port@7 { -- reg = <7>; -- phy-mode = "internal"; -- phy-handle = <&phy12>; -- label = "wan"; -- }; --}; -- --&nandcs { -- nand-ecc-strength = <4>; -- nand-ecc-step-size = <512>; -- nand-on-flash-bbt; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- compatible = "nvmem-cells"; -- label = "cferom"; -- reg = <0x0 0x100000>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0 0x0 0x100000>; -- -- base_mac_addr: mac@106a0 { -- reg = <0x106a0 0x6>; -- }; -- }; -- -- partition@100000 { -- compatible = "brcm,bcm4908-firmware"; -- label = "firmware"; -- reg = <0x100000 0x4400000>; -- }; -- }; --}; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts -+++ /dev/null -@@ -1,182 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include <dt-bindings/gpio/gpio.h> --#include <dt-bindings/input/input.h> --#include <dt-bindings/leds/common.h> -- --#include "bcm4906.dtsi" -- --/ { -- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; -- model = "TP-Link Archer C2300 V1"; -- -- memory@0 { -- device_type = "memory"; -- reg = <0x00 0x00 0x00 0x20000000>; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- led-power { -- function = LED_FUNCTION_POWER; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; -- }; -- -- led-2ghz { -- function = "2ghz"; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; -- }; -- -- led-5ghz { -- function = "5ghz"; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; -- }; -- -- led-wan-amber { -- function = LED_FUNCTION_WAN; -- color = <LED_COLOR_ID_AMBER>; -- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; -- }; -- -- led-wan-blue { -- function = LED_FUNCTION_WAN; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; -- }; -- -- led-lan { -- function = LED_FUNCTION_LAN; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; -- }; -- -- led-wps { -- function = LED_FUNCTION_WPS; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; -- }; -- -- led-usb2 { -- function = "usb2"; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -- }; -- -- led-usb3 { -- function = "usbd3"; -- color = <LED_COLOR_ID_BLUE>; -- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; -- }; -- -- led-brightness { -- function = LED_FUNCTION_BACKLIGHT; -- color = <LED_COLOR_ID_WHITE>; -- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; -- }; -- }; -- -- gpio-keys-polled { -- compatible = "gpio-keys-polled"; -- poll-interval = <100>; -- -- key-brightness { -- label = "LEDs"; -- linux,code = <KEY_BRIGHTNESS_ZERO>; -- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; -- }; -- -- key-wps { -- label = "WPS"; -- linux,code = <KEY_WPS_BUTTON>; -- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; -- }; -- -- key-wifi { -- label = "WiFi"; -- linux,code = <KEY_RFKILL>; -- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; -- }; -- -- key-restart { -- label = "Reset"; -- linux,code = <KEY_RESTART>; -- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; -- }; -- }; --}; -- --&usb_phy { -- brcm,ioc = <1>; -- status = "okay"; --}; -- --&ehci { -- status = "okay"; --}; -- --&ohci { -- status = "okay"; --}; -- --&xhci { -- status = "okay"; --}; -- --&ports { -- port@0 { -- label = "lan4"; -- }; -- -- port@1 { -- label = "lan3"; -- }; -- -- port@2 { -- label = "lan2"; -- }; -- -- port@3 { -- label = "lan1"; -- }; -- -- port@7 { -- reg = <7>; -- phy-mode = "internal"; -- phy-handle = <&phy12>; -- label = "wan"; -- }; --}; -- --&nandcs { -- nand-ecc-strength = <4>; -- nand-ecc-step-size = <512>; -- nand-on-flash-bbt; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- partitions { -- compatible = "brcm,bcm4908-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "cferom"; -- reg = <0x0 0x100000>; -- }; -- -- partition@100000 { -- compatible = "brcm,bcm4908-firmware"; -- reg = <0x100000 0x3900000>; -- }; -- -- partition@5800000 { -- compatible = "brcm,bcm4908-firmware"; -- reg = <0x3a00000 0x3900000>; -- }; -- }; --}; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi -+++ /dev/null -@@ -1,34 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include "bcm4908.dtsi" -- --/ { -- cpus { -- /delete-node/ cpu@2; -- -- /delete-node/ cpu@3; -- }; -- -- timer { -- compatible = "arm,armv8-timer"; -- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; -- }; -- -- timer { -- compatible = "arm,armv8-timer"; -- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; -- }; -- -- pmu { -- compatible = "arm,cortex-a53-pmu"; -- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; -- interrupt-affinity = <&cpu0>, <&cpu1>; -- }; --}; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -+++ /dev/null -@@ -1,207 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include <dt-bindings/gpio/gpio.h> --#include <dt-bindings/input/input.h> --#include <dt-bindings/leds/common.h> -- --#include "bcm4908.dtsi" -- --/ { -- compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; -- model = "Asus GT-AC5300"; -- -- memory@0 { -- device_type = "memory"; -- reg = <0x00 0x00 0x00 0x40000000>; -- }; -- -- gpio-keys-polled { -- compatible = "gpio-keys-polled"; -- poll-interval = <100>; -- -- key-wifi { -- label = "WiFi"; -- linux,code = <KEY_RFKILL>; -- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; -- }; -- -- key-wps { -- label = "WPS"; -- linux,code = <KEY_WPS_BUTTON>; -- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -- }; -- -- key-restart { -- label = "Reset"; -- linux,code = <KEY_RESTART>; -- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; -- }; -- -- key-brightness { -- label = "LEDs"; -- linux,code = <KEY_BRIGHTNESS_ZERO>; -- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; -- }; -- }; --}; -- --&enet { -- nvmem-cells = <&base_mac_addr>; -- nvmem-cell-names = "mac-address"; --}; -- --&usb_phy { -- brcm,ioc = <1>; -- status = "okay"; --}; -- --&ehci { -- status = "okay"; --}; -- --&ohci { -- status = "okay"; --}; -- --&xhci { -- status = "okay"; --}; -- --&ports { -- port@0 { -- label = "lan2"; -- }; -- -- port@1 { -- label = "lan1"; -- }; -- -- port@2 { -- label = "lan6"; -- }; -- -- port@3 { -- label = "lan5"; -- }; -- -- /* External BCM53134S switch */ -- port@7 { -- label = "sw"; -- reg = <7>; -- phy-mode = "rgmii"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; --}; -- --&mdio { -- /* lan8 */ -- ethernet-phy@0 { -- reg = <0>; -- }; -- -- /* lan7 */ -- ethernet-phy@1 { -- reg = <1>; -- }; -- -- /* lan4 */ -- ethernet-phy@2 { -- reg = <2>; -- }; -- -- /* lan3 */ -- ethernet-phy@3 { -- reg = <3>; -- }; --}; -- --&leds { -- led-power@11 { -- reg = <0x11>; -- function = LED_FUNCTION_POWER; -- color = <LED_COLOR_ID_WHITE>; -- default-state = "on"; -- active-low; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_led_17_a>; -- }; -- -- led-wan-red@12 { -- reg = <0x12>; -- function = LED_FUNCTION_WAN; -- color = <LED_COLOR_ID_RED>; -- active-low; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_led_18_a>; -- }; -- -- led-wps@14 { -- reg = <0x14>; -- function = LED_FUNCTION_WPS; -- color = <LED_COLOR_ID_WHITE>; -- active-low; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_led_20_a>; -- }; -- -- led-wan-white@15 { -- reg = <0x15>; -- function = LED_FUNCTION_WAN; -- color = <LED_COLOR_ID_WHITE>; -- active-low; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_led_21_a>; -- }; -- -- led-lan@19 { -- reg = <0x19>; -- function = LED_FUNCTION_LAN; -- color = <LED_COLOR_ID_WHITE>; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_led_25_a>; -- }; --}; -- --&nandcs { -- nand-ecc-strength = <4>; -- nand-ecc-step-size = <512>; -- nand-on-flash-bbt; -- brcm,nand-has-wp; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- partitions { -- compatible = "brcm,bcm4908-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- compatible = "nvmem-cells"; -- label = "cferom"; -- reg = <0x0 0x100000>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0 0x0 0x100000>; -- -- base_mac_addr: mac@106a0 { -- reg = <0x106a0 0x6>; -- }; -- }; -- -- partition@100000 { -- compatible = "brcm,bcm4908-firmware"; -- reg = <0x100000 0x5700000>; -- }; -- -- partition@5800000 { -- compatible = "brcm,bcm4908-firmware"; -- reg = <0x5800000 0x5700000>; -- }; -- }; --}; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts -+++ /dev/null -@@ -1,50 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include "bcm4908.dtsi" -- --/ { -- compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; -- model = "Netgear RAXE500"; -- -- memory@0 { -- device_type = "memory"; -- reg = <0x00 0x00 0x00 0x40000000>; -- }; --}; -- --&ehci { -- status = "okay"; --}; -- --&ohci { -- status = "okay"; --}; -- --&xhci { -- status = "okay"; --}; -- --&ports { -- port@0 { -- label = "lan4"; -- }; -- -- port@1 { -- label = "lan3"; -- }; -- -- port@2 { -- label = "lan2"; -- }; -- -- port@3 { -- label = "lan1"; -- }; -- -- port@7 { -- reg = <7>; -- phy-mode = "internal"; -- phy-handle = <&phy12>; -- label = "wan"; -- }; --}; ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ /dev/null -@@ -1,575 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -- --#include <dt-bindings/interrupt-controller/irq.h> --#include <dt-bindings/interrupt-controller/arm-gic.h> --#include <dt-bindings/phy/phy.h> --#include <dt-bindings/soc/bcm-pmb.h> -- --/dts-v1/; -- --/ { -- interrupt-parent = <&gic>; -- -- #address-cells = <2>; -- #size-cells = <2>; -- -- aliases { -- serial0 = &uart0; -- }; -- -- chosen { -- stdout-path = "serial0:115200n8"; -- }; -- -- cpus { -- #address-cells = <1>; -- #size-cells = <0>; -- -- cpu0: cpu@0 { -- device_type = "cpu"; -- compatible = "brcm,brahma-b53"; -- reg = <0x0>; -- enable-method = "spin-table"; -- cpu-release-addr = <0x0 0xfff8>; -- next-level-cache = <&l2>; -- }; -- -- cpu1: cpu@1 { -- device_type = "cpu"; -- compatible = "brcm,brahma-b53"; -- reg = <0x1>; -- enable-method = "spin-table"; -- cpu-release-addr = <0x0 0xfff8>; -- next-level-cache = <&l2>; -- }; -- -- cpu2: cpu@2 { -- device_type = "cpu"; -- compatible = "brcm,brahma-b53"; -- reg = <0x2>; -- enable-method = "spin-table"; -- cpu-release-addr = <0x0 0xfff8>; -- next-level-cache = <&l2>; -- }; -- -- cpu3: cpu@3 { -- device_type = "cpu"; -- compatible = "brcm,brahma-b53"; -- reg = <0x3>; -- enable-method = "spin-table"; -- cpu-release-addr = <0x0 0xfff8>; -- next-level-cache = <&l2>; -- }; -- -- l2: l2-cache0 { -- compatible = "cache"; -- }; -- }; -- -- axi@81000000 { -- compatible = "simple-bus"; -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0x00 0x00 0x81000000 0x4000>; -- -- gic: interrupt-controller@1000 { -- compatible = "arm,gic-400"; -- #interrupt-cells = <3>; -- #address-cells = <0>; -- interrupt-controller; -- reg = <0x1000 0x1000>, -- <0x2000 0x2000>; -- }; -- }; -- -- timer { -- compatible = "arm,armv8-timer"; -- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -- }; -- -- pmu { -- compatible = "arm,cortex-a53-pmu"; -- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; -- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; -- }; -- -- clocks { -- periph_clk: periph_clk { -- compatible = "fixed-clock"; -- #clock-cells = <0>; -- clock-frequency = <50000000>; -- clock-output-names = "periph"; -- }; -- }; -- -- soc { -- compatible = "simple-bus"; -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0x00 0x00 0x80000000 0x281000>; -- -- enet: ethernet@2000 { -- compatible = "brcm,bcm4908-enet"; -- reg = <0x2000 0x1000>; -- -- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; -- interrupt-names = "rx", "tx"; -- }; -- -- usb_phy: usb-phy@c200 { -- compatible = "brcm,bcm4908-usb-phy"; -- reg = <0xc200 0x100>; -- reg-names = "ctrl"; -- power-domains = <&pmb BCM_PMB_HOST_USB>; -- dr_mode = "host"; -- brcm,has-xhci; -- brcm,has-eohci; -- #phy-cells = <1>; -- status = "disabled"; -- }; -- -- ehci: usb@c300 { -- compatible = "generic-ehci"; -- reg = <0xc300 0x100>; -- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; -- phys = <&usb_phy PHY_TYPE_USB2>; -- status = "disabled"; -- }; -- -- ohci: usb@c400 { -- compatible = "generic-ohci"; -- reg = <0xc400 0x100>; -- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; -- phys = <&usb_phy PHY_TYPE_USB2>; -- status = "disabled"; -- }; -- -- xhci: usb@d000 { -- compatible = "generic-xhci"; -- reg = <0xd000 0x8c8>; -- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; -- phys = <&usb_phy PHY_TYPE_USB3>; -- status = "disabled"; -- }; -- -- bus@80000 { -- compatible = "simple-bus"; -- #size-cells = <1>; -- #address-cells = <1>; -- ranges = <0 0x80000 0x50000>; -- -- ethernet-switch@0 { -- compatible = "brcm,bcm4908-switch"; -- reg = <0x0 0x40000>, -- <0x40000 0x110>, -- <0x40340 0x30>, -- <0x40380 0x30>, -- <0x40600 0x34>, -- <0x40800 0x208>; -- reg-names = "core", "reg", "intrl2_0", -- "intrl2_1", "fcb", "acb"; -- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, -- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; -- brcm,num-gphy = <5>; -- brcm,num-rgmii-ports = <2>; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- ports: ports { -- #address-cells = <1>; -- #size-cells = <0>; -- -- port@0 { -- reg = <0>; -- phy-mode = "internal"; -- phy-handle = <&phy8>; -- }; -- -- port@1 { -- reg = <1>; -- phy-mode = "internal"; -- phy-handle = <&phy9>; -- }; -- -- port@2 { -- reg = <2>; -- phy-mode = "internal"; -- phy-handle = <&phy10>; -- }; -- -- port@3 { -- reg = <3>; -- phy-mode = "internal"; -- phy-handle = <&phy11>; -- }; -- -- port@8 { -- reg = <8>; -- phy-mode = "internal"; -- ethernet = <&enet>; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- }; -- }; -- -- mdio: mdio@405c0 { -- compatible = "brcm,unimac-mdio"; -- reg = <0x405c0 0x8>; -- reg-names = "mdio"; -- #size-cells = <0>; -- #address-cells = <1>; -- -- phy8: ethernet-phy@8 { -- reg = <8>; -- }; -- -- phy9: ethernet-phy@9 { -- reg = <9>; -- }; -- -- phy10: ethernet-phy@a { -- reg = <10>; -- }; -- -- phy11: ethernet-phy@b { -- reg = <11>; -- }; -- -- phy12: ethernet-phy@c { -- reg = <12>; -- }; -- }; -- }; -- -- procmon: syscon@280000 { -- compatible = "simple-bus"; -- reg = <0x280000 0x1000>; -- ranges; -- -- #address-cells = <1>; -- #size-cells = <1>; -- -- pmb: power-controller@2800c0 { -- compatible = "brcm,bcm4908-pmb"; -- reg = <0x2800c0 0x40>; -- #power-domain-cells = <1>; -- }; -- }; -- }; -- -- bus@ff800000 { -- compatible = "simple-bus"; -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0x00 0x00 0xff800000 0x3000>; -- -- twd: timer-mfd@400 { -- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; -- reg = <0x400 0x4c>; -- ranges = <0x0 0x400 0x4c>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- -- watchdog@28 { -- compatible = "brcm,bcm6345-wdt"; -- reg = <0x28 0x8>; -- }; -- }; -- -- gpio0: gpio-controller@500 { -- compatible = "brcm,bcm6345-gpio"; -- reg-names = "dirout", "dat"; -- reg = <0x500 0x28>, <0x528 0x28>; -- -- #gpio-cells = <2>; -- gpio-controller; -- }; -- -- pinctrl@560 { -- compatible = "brcm,bcm4908-pinctrl"; -- reg = <0x560 0x10>; -- -- pins_led_0_a: led_0-a-pins { -- function = "led_0"; -- groups = "led_0_grp_a"; -- }; -- -- pins_led_1_a: led_1-a-pins { -- function = "led_1"; -- groups = "led_1_grp_a"; -- }; -- -- pins_led_2_a: led_2-a-pins { -- function = "led_2"; -- groups = "led_2_grp_a"; -- }; -- -- pins_led_3_a: led_3-a-pins { -- function = "led_3"; -- groups = "led_3_grp_a"; -- }; -- -- pins_led_4_a: led_4-a-pins { -- function = "led_4"; -- groups = "led_4_grp_a"; -- }; -- -- pins_led_5_a: led_5-a-pins { -- function = "led_5"; -- groups = "led_5_grp_a"; -- }; -- -- pins_led_6_a: led_6-a-pins { -- function = "led_6"; -- groups = "led_6_grp_a"; -- }; -- -- pins_led_7_a: led_7-a-pins { -- function = "led_7"; -- groups = "led_7_grp_a"; -- }; -- -- pins_led_8_a: led_8-a-pins { -- function = "led_8"; -- groups = "led_8_grp_a"; -- }; -- -- pins_led_9_a: led_9-a-pins { -- function = "led_9"; -- groups = "led_9_grp_a"; -- }; -- -- pins_led_10_a: led_10-a-pins { -- function = "led_10"; -- groups = "led_10_grp_a"; -- }; -- -- pins_led_11_a: led_11-a-pins { -- function = "led_11"; -- groups = "led_11_grp_a"; -- }; -- -- pins_led_12_a: led_12-a-pins { -- function = "led_12"; -- groups = "led_12_grp_a"; -- }; -- -- pins_led_13_a: led_13-a-pins { -- function = "led_13"; -- groups = "led_13_grp_a"; -- }; -- -- pins_led_14_a: led_14-a-pins { -- function = "led_14"; -- groups = "led_14_grp_a"; -- }; -- -- pins_led_15_a: led_15-a-pins { -- function = "led_15"; -- groups = "led_15_grp_a"; -- }; -- -- pins_led_16_a: led_16-a-pins { -- function = "led_16"; -- groups = "led_16_grp_a"; -- }; -- -- pins_led_17_a: led_17-a-pins { -- function = "led_17"; -- groups = "led_17_grp_a"; -- }; -- -- pins_led_18_a: led_18-a-pins { -- function = "led_18"; -- groups = "led_18_grp_a"; -- }; -- -- pins_led_19_a: led_19-a-pins { -- function = "led_19"; -- groups = "led_19_grp_a"; -- }; -- -- pins_led_20_a: led_20-a-pins { -- function = "led_20"; -- groups = "led_20_grp_a"; -- }; -- -- pins_led_21_a: led_21-a-pins { -- function = "led_21"; -- groups = "led_21_grp_a"; -- }; -- -- pins_led_22_a: led_22-a-pins { -- function = "led_22"; -- groups = "led_22_grp_a"; -- }; -- -- pins_led_23_a: led_23-a-pins { -- function = "led_23"; -- groups = "led_23_grp_a"; -- }; -- -- pins_led_24_a: led_24-a-pins { -- function = "led_24"; -- groups = "led_24_grp_a"; -- }; -- -- pins_led_25_a: led_25-a-pins { -- function = "led_25"; -- groups = "led_25_grp_a"; -- }; -- -- pins_led_26_a: led_26-a-pins { -- function = "led_26"; -- groups = "led_26_grp_a"; -- }; -- -- pins_led_27_a: led_27-a-pins { -- function = "led_27"; -- groups = "led_27_grp_a"; -- }; -- -- pins_led_28_a: led_28-a-pins { -- function = "led_28"; -- groups = "led_28_grp_a"; -- }; -- -- pins_led_29_a: led_29-a-pins { -- function = "led_29"; -- groups = "led_29_grp_a"; -- }; -- -- pins_led_30_a: led_30-a-pins { -- function = "led_30"; -- groups = "led_30_grp_a"; -- }; -- -- pins_led_31_a: led_31-a-pins { -- function = "led_31"; -- groups = "led_31_grp_a"; -- }; -- -- pins_hs_uart: hs_uart-pins { -- function = "hs_uart"; -- groups = "hs_uart_grp"; -- }; -- -- pins_i2c_a: i2c-a-pins { -- function = "i2c"; -- groups = "i2c_grp_a"; -- }; -- -- pins_i2c_b: i2c-b-pins { -- function = "i2c"; -- groups = "i2c_grp_b"; -- }; -- -- pins_i2s: i2s-pins { -- function = "i2s"; -- groups = "i2s_grp"; -- }; -- -- pins_nand_ctrl: nand_ctrl-pins { -- function = "nand_ctrl"; -- groups = "nand_ctrl_grp"; -- }; -- -- pins_nand_data: nand_data-pins { -- function = "nand_data"; -- groups = "nand_data_grp"; -- }; -- -- pins_emmc_ctrl: emmc_ctrl-pins { -- function = "emmc_ctrl"; -- groups = "emmc_ctrl_grp"; -- }; -- -- pins_usb0_pwr: usb0_pwr-pins { -- function = "usb0_pwr"; -- groups = "usb0_pwr_grp"; -- }; -- -- pins_usb1_pwr: usb1_pwr-pins { -- function = "usb1_pwr"; -- groups = "usb1_pwr_grp"; -- }; -- }; -- -- uart0: serial@640 { -- compatible = "brcm,bcm6345-uart"; -- reg = <0x640 0x18>; -- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -- clocks = <&periph_clk>; -- clock-names = "refclk"; -- status = "okay"; -- }; -- -- leds: leds@800 { -- compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; -- reg = <0x800 0xdc>; -- -- #address-cells = <1>; -- #size-cells = <0>; -- }; -- -- nand-controller@1800 { -- #address-cells = <1>; -- #size-cells = <0>; -- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; -- reg = <0x1800 0x600>, <0x2000 0x10>; -- reg-names = "nand", "nand-int-base"; -- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; -- interrupt-names = "nand"; -- status = "okay"; -- -- nandcs: nand@0 { -- compatible = "brcm,nandcs"; -- reg = <0>; -- }; -- }; -- -- i2c@2100 { -- compatible = "brcm,brcmper-i2c"; -- reg = <0x2100 0x58>; -- clock-frequency = <97500>; -- pinctrl-names = "default"; -- pinctrl-0 = <&pins_i2c_a>; -- status = "disabled"; -- }; -- -- misc@2600 { -- compatible = "brcm,misc", "simple-mfd"; -- reg = <0x2600 0xe4>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- ranges = <0x00 0x2600 0xe4>; -- -- reset-controller@2644 { -- compatible = "brcm,bcm4908-misc-pcie-reset"; -- reg = <0x44 0x04>; -- #reset-cells = <1>; -- }; -- }; -- }; -- -- reboot { -- compatible = "syscon-reboot"; -- regmap = <&twd>; -- offset = <0x34>; -- mask = <1>; -- }; --}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts -@@ -0,0 +1,157 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+#include <dt-bindings/leds/common.h> -+ -+#include "bcm4906.dtsi" -+ -+/ { -+ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; -+ model = "Netgear R8000P"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led-power-white { -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-power-amber { -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_AMBER>; -+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-wps { -+ function = LED_FUNCTION_WPS; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-2ghz { -+ function = "2ghz"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-5ghz-1 { -+ function = "5ghz-1"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-5ghz-2 { -+ function = "5ghz-2"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-usb2 { -+ function = "usb2"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-usb3 { -+ function = "usb3"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-wifi { -+ function = "wifi"; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&enet { -+ nvmem-cells = <&base_mac_addr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&usb_phy { -+ brcm,ioc = <1>; -+ status = "okay"; -+}; -+ -+&ehci { -+ status = "okay"; -+}; -+ -+&ohci { -+ status = "okay"; -+}; -+ -+&xhci { -+ status = "okay"; -+}; -+ -+&ports { -+ port@0 { -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan1"; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ phy-mode = "internal"; -+ phy-handle = <&phy12>; -+ label = "wan"; -+ }; -+}; -+ -+&nandcs { -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-on-flash-bbt; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ compatible = "nvmem-cells"; -+ label = "cferom"; -+ reg = <0x0 0x100000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0x0 0x100000>; -+ -+ base_mac_addr: mac@106a0 { -+ reg = <0x106a0 0x6>; -+ }; -+ }; -+ -+ partition@100000 { -+ compatible = "brcm,bcm4908-firmware"; -+ label = "firmware"; -+ reg = <0x100000 0x4400000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts -@@ -0,0 +1,182 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+#include <dt-bindings/leds/common.h> -+ -+#include "bcm4906.dtsi" -+ -+/ { -+ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; -+ model = "TP-Link Archer C2300 V1"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led-power { -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-2ghz { -+ function = "2ghz"; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-5ghz { -+ function = "5ghz"; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-wan-amber { -+ function = LED_FUNCTION_WAN; -+ color = <LED_COLOR_ID_AMBER>; -+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-wan-blue { -+ function = LED_FUNCTION_WAN; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-lan { -+ function = LED_FUNCTION_LAN; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-wps { -+ function = LED_FUNCTION_WPS; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-usb2 { -+ function = "usb2"; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-usb3 { -+ function = "usbd3"; -+ color = <LED_COLOR_ID_BLUE>; -+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-brightness { -+ function = LED_FUNCTION_BACKLIGHT; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ poll-interval = <100>; -+ -+ key-brightness { -+ label = "LEDs"; -+ linux,code = <KEY_BRIGHTNESS_ZERO>; -+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-wifi { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&usb_phy { -+ brcm,ioc = <1>; -+ status = "okay"; -+}; -+ -+&ehci { -+ status = "okay"; -+}; -+ -+&ohci { -+ status = "okay"; -+}; -+ -+&xhci { -+ status = "okay"; -+}; -+ -+&ports { -+ port@0 { -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan1"; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ phy-mode = "internal"; -+ phy-handle = <&phy12>; -+ label = "wan"; -+ }; -+}; -+ -+&nandcs { -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-on-flash-bbt; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ partitions { -+ compatible = "brcm,bcm4908-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "cferom"; -+ reg = <0x0 0x100000>; -+ }; -+ -+ partition@100000 { -+ compatible = "brcm,bcm4908-firmware"; -+ reg = <0x100000 0x3900000>; -+ }; -+ -+ partition@5800000 { -+ compatible = "brcm,bcm4908-firmware"; -+ reg = <0x3a00000 0x3900000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi -@@ -0,0 +1,34 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include "bcm4908.dtsi" -+ -+/ { -+ cpus { -+ /delete-node/ cpu@2; -+ -+ /delete-node/ cpu@3; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu { -+ compatible = "arm,cortex-a53-pmu"; -+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&cpu0>, <&cpu1>; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts -@@ -0,0 +1,207 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+#include <dt-bindings/leds/common.h> -+ -+#include "bcm4908.dtsi" -+ -+/ { -+ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; -+ model = "Asus GT-AC5300"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x40000000>; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ poll-interval = <100>; -+ -+ key-wifi { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; -+ }; -+ -+ key-brightness { -+ label = "LEDs"; -+ linux,code = <KEY_BRIGHTNESS_ZERO>; -+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&enet { -+ nvmem-cells = <&base_mac_addr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&usb_phy { -+ brcm,ioc = <1>; -+ status = "okay"; -+}; -+ -+&ehci { -+ status = "okay"; -+}; -+ -+&ohci { -+ status = "okay"; -+}; -+ -+&xhci { -+ status = "okay"; -+}; -+ -+&ports { -+ port@0 { -+ label = "lan2"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan6"; -+ }; -+ -+ port@3 { -+ label = "lan5"; -+ }; -+ -+ /* External BCM53134S switch */ -+ port@7 { -+ label = "sw"; -+ reg = <7>; -+ phy-mode = "rgmii"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+}; -+ -+&mdio { -+ /* lan8 */ -+ ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ /* lan7 */ -+ ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ /* lan4 */ -+ ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ /* lan3 */ -+ ethernet-phy@3 { -+ reg = <3>; -+ }; -+}; -+ -+&leds { -+ led-power@11 { -+ reg = <0x11>; -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_WHITE>; -+ default-state = "on"; -+ active-low; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_led_17_a>; -+ }; -+ -+ led-wan-red@12 { -+ reg = <0x12>; -+ function = LED_FUNCTION_WAN; -+ color = <LED_COLOR_ID_RED>; -+ active-low; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_led_18_a>; -+ }; -+ -+ led-wps@14 { -+ reg = <0x14>; -+ function = LED_FUNCTION_WPS; -+ color = <LED_COLOR_ID_WHITE>; -+ active-low; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_led_20_a>; -+ }; -+ -+ led-wan-white@15 { -+ reg = <0x15>; -+ function = LED_FUNCTION_WAN; -+ color = <LED_COLOR_ID_WHITE>; -+ active-low; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_led_21_a>; -+ }; -+ -+ led-lan@19 { -+ reg = <0x19>; -+ function = LED_FUNCTION_LAN; -+ color = <LED_COLOR_ID_WHITE>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_led_25_a>; -+ }; -+}; -+ -+&nandcs { -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-on-flash-bbt; -+ brcm,nand-has-wp; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ partitions { -+ compatible = "brcm,bcm4908-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ compatible = "nvmem-cells"; -+ label = "cferom"; -+ reg = <0x0 0x100000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0x0 0x100000>; -+ -+ base_mac_addr: mac@106a0 { -+ reg = <0x106a0 0x6>; -+ }; -+ }; -+ -+ partition@100000 { -+ compatible = "brcm,bcm4908-firmware"; -+ reg = <0x100000 0x5700000>; -+ }; -+ -+ partition@5800000 { -+ compatible = "brcm,bcm4908-firmware"; -+ reg = <0x5800000 0x5700000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts -@@ -0,0 +1,50 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include "bcm4908.dtsi" -+ -+/ { -+ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; -+ model = "Netgear RAXE500"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x40000000>; -+ }; -+}; -+ -+&ehci { -+ status = "okay"; -+}; -+ -+&ohci { -+ status = "okay"; -+}; -+ -+&xhci { -+ status = "okay"; -+}; -+ -+&ports { -+ port@0 { -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan1"; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ phy-mode = "internal"; -+ phy-handle = <&phy12>; -+ label = "wan"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -@@ -0,0 +1,575 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/interrupt-controller/irq.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+#include <dt-bindings/phy/phy.h> -+#include <dt-bindings/soc/bcm-pmb.h> -+ -+/dts-v1/; -+ -+/ { -+ interrupt-parent = <&gic>; -+ -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x0>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x1>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x2>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x3>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ l2: l2-cache0 { -+ compatible = "cache"; -+ }; -+ }; -+ -+ axi@81000000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0x81000000 0x4000>; -+ -+ gic: interrupt-controller@1000 { -+ compatible = "arm,gic-400"; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ interrupt-controller; -+ reg = <0x1000 0x1000>, -+ <0x2000 0x2000>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu { -+ compatible = "arm,cortex-a53-pmu"; -+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; -+ }; -+ -+ clocks { -+ periph_clk: periph_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <50000000>; -+ clock-output-names = "periph"; -+ }; -+ }; -+ -+ soc { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0x80000000 0x281000>; -+ -+ enet: ethernet@2000 { -+ compatible = "brcm,bcm4908-enet"; -+ reg = <0x2000 0x1000>; -+ -+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "rx", "tx"; -+ }; -+ -+ usb_phy: usb-phy@c200 { -+ compatible = "brcm,bcm4908-usb-phy"; -+ reg = <0xc200 0x100>; -+ reg-names = "ctrl"; -+ power-domains = <&pmb BCM_PMB_HOST_USB>; -+ dr_mode = "host"; -+ brcm,has-xhci; -+ brcm,has-eohci; -+ #phy-cells = <1>; -+ status = "disabled"; -+ }; -+ -+ ehci: usb@c300 { -+ compatible = "generic-ehci"; -+ reg = <0xc300 0x100>; -+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&usb_phy PHY_TYPE_USB2>; -+ status = "disabled"; -+ }; -+ -+ ohci: usb@c400 { -+ compatible = "generic-ohci"; -+ reg = <0xc400 0x100>; -+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&usb_phy PHY_TYPE_USB2>; -+ status = "disabled"; -+ }; -+ -+ xhci: usb@d000 { -+ compatible = "generic-xhci"; -+ reg = <0xd000 0x8c8>; -+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&usb_phy PHY_TYPE_USB3>; -+ status = "disabled"; -+ }; -+ -+ bus@80000 { -+ compatible = "simple-bus"; -+ #size-cells = <1>; -+ #address-cells = <1>; -+ ranges = <0 0x80000 0x50000>; -+ -+ ethernet-switch@0 { -+ compatible = "brcm,bcm4908-switch"; -+ reg = <0x0 0x40000>, -+ <0x40000 0x110>, -+ <0x40340 0x30>, -+ <0x40380 0x30>, -+ <0x40600 0x34>, -+ <0x40800 0x208>; -+ reg-names = "core", "reg", "intrl2_0", -+ "intrl2_1", "fcb", "acb"; -+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; -+ brcm,num-gphy = <5>; -+ brcm,num-rgmii-ports = <2>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ports: ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ phy-mode = "internal"; -+ phy-handle = <&phy8>; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ phy-mode = "internal"; -+ phy-handle = <&phy9>; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ phy-mode = "internal"; -+ phy-handle = <&phy10>; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ phy-mode = "internal"; -+ phy-handle = <&phy11>; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ phy-mode = "internal"; -+ ethernet = <&enet>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+ -+ mdio: mdio@405c0 { -+ compatible = "brcm,unimac-mdio"; -+ reg = <0x405c0 0x8>; -+ reg-names = "mdio"; -+ #size-cells = <0>; -+ #address-cells = <1>; -+ -+ phy8: ethernet-phy@8 { -+ reg = <8>; -+ }; -+ -+ phy9: ethernet-phy@9 { -+ reg = <9>; -+ }; -+ -+ phy10: ethernet-phy@a { -+ reg = <10>; -+ }; -+ -+ phy11: ethernet-phy@b { -+ reg = <11>; -+ }; -+ -+ phy12: ethernet-phy@c { -+ reg = <12>; -+ }; -+ }; -+ }; -+ -+ procmon: syscon@280000 { -+ compatible = "simple-bus"; -+ reg = <0x280000 0x1000>; -+ ranges; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ pmb: power-controller@2800c0 { -+ compatible = "brcm,bcm4908-pmb"; -+ reg = <0x2800c0 0x40>; -+ #power-domain-cells = <1>; -+ }; -+ }; -+ }; -+ -+ bus@ff800000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0xff800000 0x3000>; -+ -+ twd: timer-mfd@400 { -+ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; -+ reg = <0x400 0x4c>; -+ ranges = <0x0 0x400 0x4c>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ watchdog@28 { -+ compatible = "brcm,bcm6345-wdt"; -+ reg = <0x28 0x8>; -+ }; -+ }; -+ -+ gpio0: gpio-controller@500 { -+ compatible = "brcm,bcm6345-gpio"; -+ reg-names = "dirout", "dat"; -+ reg = <0x500 0x28>, <0x528 0x28>; -+ -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ pinctrl@560 { -+ compatible = "brcm,bcm4908-pinctrl"; -+ reg = <0x560 0x10>; -+ -+ pins_led_0_a: led_0-a-pins { -+ function = "led_0"; -+ groups = "led_0_grp_a"; -+ }; -+ -+ pins_led_1_a: led_1-a-pins { -+ function = "led_1"; -+ groups = "led_1_grp_a"; -+ }; -+ -+ pins_led_2_a: led_2-a-pins { -+ function = "led_2"; -+ groups = "led_2_grp_a"; -+ }; -+ -+ pins_led_3_a: led_3-a-pins { -+ function = "led_3"; -+ groups = "led_3_grp_a"; -+ }; -+ -+ pins_led_4_a: led_4-a-pins { -+ function = "led_4"; -+ groups = "led_4_grp_a"; -+ }; -+ -+ pins_led_5_a: led_5-a-pins { -+ function = "led_5"; -+ groups = "led_5_grp_a"; -+ }; -+ -+ pins_led_6_a: led_6-a-pins { -+ function = "led_6"; -+ groups = "led_6_grp_a"; -+ }; -+ -+ pins_led_7_a: led_7-a-pins { -+ function = "led_7"; -+ groups = "led_7_grp_a"; -+ }; -+ -+ pins_led_8_a: led_8-a-pins { -+ function = "led_8"; -+ groups = "led_8_grp_a"; -+ }; -+ -+ pins_led_9_a: led_9-a-pins { -+ function = "led_9"; -+ groups = "led_9_grp_a"; -+ }; -+ -+ pins_led_10_a: led_10-a-pins { -+ function = "led_10"; -+ groups = "led_10_grp_a"; -+ }; -+ -+ pins_led_11_a: led_11-a-pins { -+ function = "led_11"; -+ groups = "led_11_grp_a"; -+ }; -+ -+ pins_led_12_a: led_12-a-pins { -+ function = "led_12"; -+ groups = "led_12_grp_a"; -+ }; -+ -+ pins_led_13_a: led_13-a-pins { -+ function = "led_13"; -+ groups = "led_13_grp_a"; -+ }; -+ -+ pins_led_14_a: led_14-a-pins { -+ function = "led_14"; -+ groups = "led_14_grp_a"; -+ }; -+ -+ pins_led_15_a: led_15-a-pins { -+ function = "led_15"; -+ groups = "led_15_grp_a"; -+ }; -+ -+ pins_led_16_a: led_16-a-pins { -+ function = "led_16"; -+ groups = "led_16_grp_a"; -+ }; -+ -+ pins_led_17_a: led_17-a-pins { -+ function = "led_17"; -+ groups = "led_17_grp_a"; -+ }; -+ -+ pins_led_18_a: led_18-a-pins { -+ function = "led_18"; -+ groups = "led_18_grp_a"; -+ }; -+ -+ pins_led_19_a: led_19-a-pins { -+ function = "led_19"; -+ groups = "led_19_grp_a"; -+ }; -+ -+ pins_led_20_a: led_20-a-pins { -+ function = "led_20"; -+ groups = "led_20_grp_a"; -+ }; -+ -+ pins_led_21_a: led_21-a-pins { -+ function = "led_21"; -+ groups = "led_21_grp_a"; -+ }; -+ -+ pins_led_22_a: led_22-a-pins { -+ function = "led_22"; -+ groups = "led_22_grp_a"; -+ }; -+ -+ pins_led_23_a: led_23-a-pins { -+ function = "led_23"; -+ groups = "led_23_grp_a"; -+ }; -+ -+ pins_led_24_a: led_24-a-pins { -+ function = "led_24"; -+ groups = "led_24_grp_a"; -+ }; -+ -+ pins_led_25_a: led_25-a-pins { -+ function = "led_25"; -+ groups = "led_25_grp_a"; -+ }; -+ -+ pins_led_26_a: led_26-a-pins { -+ function = "led_26"; -+ groups = "led_26_grp_a"; -+ }; -+ -+ pins_led_27_a: led_27-a-pins { -+ function = "led_27"; -+ groups = "led_27_grp_a"; -+ }; -+ -+ pins_led_28_a: led_28-a-pins { -+ function = "led_28"; -+ groups = "led_28_grp_a"; -+ }; -+ -+ pins_led_29_a: led_29-a-pins { -+ function = "led_29"; -+ groups = "led_29_grp_a"; -+ }; -+ -+ pins_led_30_a: led_30-a-pins { -+ function = "led_30"; -+ groups = "led_30_grp_a"; -+ }; -+ -+ pins_led_31_a: led_31-a-pins { -+ function = "led_31"; -+ groups = "led_31_grp_a"; -+ }; -+ -+ pins_hs_uart: hs_uart-pins { -+ function = "hs_uart"; -+ groups = "hs_uart_grp"; -+ }; -+ -+ pins_i2c_a: i2c-a-pins { -+ function = "i2c"; -+ groups = "i2c_grp_a"; -+ }; -+ -+ pins_i2c_b: i2c-b-pins { -+ function = "i2c"; -+ groups = "i2c_grp_b"; -+ }; -+ -+ pins_i2s: i2s-pins { -+ function = "i2s"; -+ groups = "i2s_grp"; -+ }; -+ -+ pins_nand_ctrl: nand_ctrl-pins { -+ function = "nand_ctrl"; -+ groups = "nand_ctrl_grp"; -+ }; -+ -+ pins_nand_data: nand_data-pins { -+ function = "nand_data"; -+ groups = "nand_data_grp"; -+ }; -+ -+ pins_emmc_ctrl: emmc_ctrl-pins { -+ function = "emmc_ctrl"; -+ groups = "emmc_ctrl_grp"; -+ }; -+ -+ pins_usb0_pwr: usb0_pwr-pins { -+ function = "usb0_pwr"; -+ groups = "usb0_pwr_grp"; -+ }; -+ -+ pins_usb1_pwr: usb1_pwr-pins { -+ function = "usb1_pwr"; -+ groups = "usb1_pwr_grp"; -+ }; -+ }; -+ -+ uart0: serial@640 { -+ compatible = "brcm,bcm6345-uart"; -+ reg = <0x640 0x18>; -+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&periph_clk>; -+ clock-names = "refclk"; -+ status = "okay"; -+ }; -+ -+ leds: leds@800 { -+ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; -+ reg = <0x800 0xdc>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ nand-controller@1800 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; -+ reg = <0x1800 0x600>, <0x2000 0x10>; -+ reg-names = "nand", "nand-int-base"; -+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "nand"; -+ status = "okay"; -+ -+ nandcs: nand@0 { -+ compatible = "brcm,nandcs"; -+ reg = <0>; -+ }; -+ }; -+ -+ i2c@2100 { -+ compatible = "brcm,brcmper-i2c"; -+ reg = <0x2100 0x58>; -+ clock-frequency = <97500>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pins_i2c_a>; -+ status = "disabled"; -+ }; -+ -+ misc@2600 { -+ compatible = "brcm,misc", "simple-mfd"; -+ reg = <0x2600 0xe4>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x2600 0xe4>; -+ -+ reset-controller@2644 { -+ compatible = "brcm,bcm4908-misc-pcie-reset"; -+ reg = <0x44 0x04>; -+ #reset-cells = <1>; -+ }; -+ }; -+ }; -+ -+ reboot { -+ compatible = "syscon-reboot"; -+ regmap = <&twd>; -+ offset = <0x34>; -+ mask = <1>; -+ }; -+}; diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch deleted file mode 100644 index b121200a25..0000000000 --- a/target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 5cca02449490e767289bda38db1577e2c375c084 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 28 Feb 2023 15:43:58 +0100 -Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt - name -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes: -arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected - From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml -arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected) - From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/ -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -@@ -556,7 +556,7 @@ - reg = <0x1800 0x600>, <0x2000 0x10>; - reg-names = "nand", "nand-int-base"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; -- interrupt-names = "nand"; -+ interrupt-names = "nand_ctlrdy"; - status = "okay"; - - nandcs: nand@0 { diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch deleted file mode 100644 index a469a32a2c..0000000000 --- a/target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 28 Feb 2023 15:44:00 +0100 -Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes: -arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' - From schema: schemas/simple-bus.yaml - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/ -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -@@ -260,7 +260,7 @@ - }; - }; - -- procmon: syscon@280000 { -+ procmon: bus@280000 { - compatible = "simple-bus"; - reg = <0x280000 0x1000>; - ranges; |