diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch | 62 |
1 files changed, 0 insertions, 62 deletions
diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch deleted file mode 100644 index 2da45ff9da..0000000000 --- a/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 482c85c7fc95c572d368b2214b9e9d2c4a2e5789 Mon Sep 17 00:00:00 2001 -From: Matthew Hagan <mnhagan88@gmail.com> -Date: Wed, 23 Feb 2022 23:50:40 +0000 -Subject: [PATCH] ARM: dts: NSP: MX6X: correct LED function types - -Currently, the amber LED will remain always on. This is due to a -misinterpretation of the LED sub-node properties, where-by "default-state" -was used to indicate the initial state when powering on the device. When in -use, however, this resulted in the amber LED always being on. Instead change -this to only indicate a fault state. - -Assign LED_FUNCTION_POWER to the green PWM LED. - -These changes bring the MX64/65 in line with the MR32's devicetree. - -Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 3 +-- - arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 3 +-- - arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +- - 3 files changed, 3 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi -+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi -@@ -57,10 +57,9 @@ - - led-4 { - /* amber:power */ -- function = LED_FUNCTION_POWER; -+ function = LED_FUNCTION_FAULT; - color = <LED_COLOR_ID_AMBER>; - gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; -- default-state = "on"; - }; - - led-5 { ---- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi -+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi -@@ -106,10 +106,9 @@ - - led-a { - /* amber:power */ -- function = LED_FUNCTION_POWER; -+ function = LED_FUNCTION_FAULT; - color = <LED_COLOR_ID_AMBER>; - gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; -- default-state = "on"; - }; - - led-b { ---- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi -+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi -@@ -22,7 +22,7 @@ - }; - - led-2 { -- function = LED_FUNCTION_INDICATOR; -+ function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - pwms = <&pwm 2 50000>; - max-brightness = <255>; |