diff options
Diffstat (limited to 'target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch')
| -rw-r--r-- | target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch | 324 |
1 files changed, 0 insertions, 324 deletions
diff --git a/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch b/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch deleted file mode 100644 index 8aded43526..0000000000 --- a/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch +++ /dev/null @@ -1,324 +0,0 @@ -From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 10 Dec 2020 18:23:52 +0100 -Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the - json-schema -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This standardizes its documentation, allows validating with Makefile -checks and helps writing DTS files. - -Noticeable changes: -1. Dropped "Partitions can be represented by sub-nodes of a flash - device." as we also support subpartitions (don't have to be part of - flash device node) -2. Dropped "to Linux" as bindings are meant to be os agnostic. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com -Signed-off-by: Rob Herring <robh@kernel.org> ---- - .../devicetree/bindings/mtd/partition.txt | 131 +-------------- - .../mtd/partitions/fixed-partitions.yaml | 152 ++++++++++++++++++ - 2 files changed, 154 insertions(+), 129 deletions(-) - create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml - ---- a/Documentation/devicetree/bindings/mtd/partition.txt -+++ b/Documentation/devicetree/bindings/mtd/partition.txt -@@ -24,137 +24,10 @@ another partitioning method. - Available bindings are listed in the "partitions" subdirectory. - - --Fixed Partitions --================ -- --Partitions can be represented by sub-nodes of a flash device. This can be used --on platforms which have strong conventions about which portions of a flash are --used for what purposes, but which don't use an on-flash partition table such --as RedBoot. -- --The partition table should be a subnode of the flash node and should be named --'partitions'. This node should have the following property: --- compatible : (required) must be "fixed-partitions" --Partitions are then defined in subnodes of the partitions node. -+Deprecated: partitions defined in flash node -+============================================ - - For backwards compatibility partitions as direct subnodes of the flash device are - supported. This use is discouraged. - NOTE: also for backwards compatibility, direct subnodes that have a compatible - string are not considered partitions, as they may be used for other bindings. -- --#address-cells & #size-cells must both be present in the partitions subnode of the --flash device. There are two valid values for both: --<1>: for partitions that require a single 32-bit cell to represent their -- size/address (aka the value is below 4 GiB) --<2>: for partitions that require two 32-bit cells to represent their -- size/address (aka the value is 4 GiB or greater). -- --Required properties: --- reg : The partition's offset and size within the flash -- --Optional properties: --- label : The label / name for this partition. If omitted, the label is taken -- from the node name (excluding the unit address). --- read-only : This parameter, if present, is a hint to Linux that this -- partition should only be mounted read-only. This is usually used for flash -- partitions containing early-boot firmware images or data which should not be -- clobbered. --- lock : Do not unlock the partition at initialization time (not supported on -- all devices) --- slc-mode: This parameter, if present, allows one to emulate SLC mode on a -- partition attached to an MLC NAND thus making this partition immune to -- paired-pages corruptions -- --Examples: -- -- --flash@0 { -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "u-boot"; -- reg = <0x0000000 0x100000>; -- read-only; -- }; -- -- uimage@100000 { -- reg = <0x0100000 0x200000>; -- }; -- }; --}; -- --flash@1 { -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <2>; -- -- /* a 4 GiB partition */ -- partition@0 { -- label = "filesystem"; -- reg = <0x00000000 0x1 0x00000000>; -- }; -- }; --}; -- --flash@2 { -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <2>; -- #size-cells = <2>; -- -- /* an 8 GiB partition */ -- partition@0 { -- label = "filesystem #1"; -- reg = <0x0 0x00000000 0x2 0x00000000>; -- }; -- -- /* a 4 GiB partition */ -- partition@200000000 { -- label = "filesystem #2"; -- reg = <0x2 0x00000000 0x1 0x00000000>; -- }; -- }; --}; -- --flash@3 { -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "bootloader"; -- reg = <0x000000 0x100000>; -- read-only; -- }; -- -- firmware@100000 { -- label = "firmware"; -- reg = <0x100000 0xe00000>; -- compatible = "brcm,trx"; -- }; -- -- calibration@f00000 { -- label = "calibration"; -- reg = <0xf00000 0x100000>; -- compatible = "fixed-partitions"; -- ranges = <0 0xf00000 0x100000>; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "wifi0"; -- reg = <0x000000 0x080000>; -- }; -- -- partition@80000 { -- label = "wifi1"; -- reg = <0x080000 0x080000>; -- }; -- }; -- }; --}; ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml -@@ -0,0 +1,152 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Fixed partitions -+ -+description: | -+ This binding can be used on platforms which have strong conventions about -+ which portions of a flash are used for what purposes, but which don't use an -+ on-flash partition table such as RedBoot. -+ -+ The partition table should be a node named "partitions". Partitions are then -+ defined as subnodes. -+ -+maintainers: -+ - Rafał Miłecki <rafal@milecki.pl> -+ -+properties: -+ compatible: -+ const: fixed-partitions -+ -+ "#address-cells": true -+ -+ "#size-cells": true -+ -+patternProperties: -+ "@[0-9a-f]+$": -+ description: node describing a single flash partition -+ type: object -+ -+ properties: -+ reg: -+ description: partition's offset and size within the flash -+ maxItems: 1 -+ -+ label: -+ description: The label / name for this partition. If omitted, the label -+ is taken from the node name (excluding the unit address). -+ -+ read-only: -+ description: This parameter, if present, is a hint that this partition -+ should only be mounted read-only. This is usually used for flash -+ partitions containing early-boot firmware images or data which should -+ not be clobbered. -+ type: boolean -+ -+ lock: -+ description: Do not unlock the partition at initialization time (not -+ supported on all devices) -+ type: boolean -+ -+ slc-mode: -+ description: This parameter, if present, allows one to emulate SLC mode -+ on a partition attached to an MLC NAND thus making this partition -+ immune to paired-pages corruptions -+ type: boolean -+ -+ required: -+ - reg -+ -+required: -+ - "#address-cells" -+ - "#size-cells" -+ -+additionalProperties: true -+ -+examples: -+ - | -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0000000 0x100000>; -+ read-only; -+ }; -+ -+ uimage@100000 { -+ reg = <0x0100000 0x200000>; -+ }; -+ }; -+ - | -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <2>; -+ -+ /* a 4 GiB partition */ -+ partition@0 { -+ label = "filesystem"; -+ reg = <0x00000000 0x1 0x00000000>; -+ }; -+ }; -+ - | -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ /* an 8 GiB partition */ -+ partition@0 { -+ label = "filesystem #1"; -+ reg = <0x0 0x00000000 0x2 0x00000000>; -+ }; -+ -+ /* a 4 GiB partition */ -+ partition@200000000 { -+ label = "filesystem #2"; -+ reg = <0x2 0x00000000 0x1 0x00000000>; -+ }; -+ }; -+ - | -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "bootloader"; -+ reg = <0x000000 0x100000>; -+ read-only; -+ }; -+ -+ firmware@100000 { -+ compatible = "brcm,trx"; -+ label = "firmware"; -+ reg = <0x100000 0xe00000>; -+ }; -+ -+ calibration@f00000 { -+ compatible = "fixed-partitions"; -+ label = "calibration"; -+ reg = <0xf00000 0x100000>; -+ ranges = <0 0xf00000 0x100000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "wifi0"; -+ reg = <0x000000 0x080000>; -+ }; -+ -+ partition@80000 { -+ label = "wifi1"; -+ reg = <0x080000 0x080000>; -+ }; -+ }; -+ }; |