diff options
Diffstat (limited to 'target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts')
-rw-r--r-- | target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts | 479 |
1 files changed, 0 insertions, 479 deletions
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts deleted file mode 100644 index c1c21856ca..0000000000 --- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts +++ /dev/null @@ -1,479 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8062.dtsi" -#include <dt-bindings/input/input.h> - -/delete-node/ &nand_pins; - -/ { - model = "NEC Platforms Aterm WG2600HP3"; - compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064"; - - memory { - device_type = "memory"; - reg = <0x42000000 0x1e000000>; - }; - - aliases { - label-mac-device = &gmac2; - - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_red; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - mode0 { - label = "mode0"; - gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - mode1 { - label = "mode1"; - gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - label = "green:power"; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - led_power_red: power_red { - label = "red:power"; - gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "green:active"; - gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "red:active"; - gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "green:tv"; - gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "red:tv"; - gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>; - }; - - converter_green { - label = "green:converter"; - gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - pinctrl-0 = <&akro_pins>; - pinctrl-names = "default"; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - buttons_pins: buttons_pins { - mux { - pins = "gpio22", "gpio24", "gpio40", - "gpio41"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - leds_pins: leds_pins { - mux { - pins = "gpio14", "gpio15", "gpio35", - "gpio36", "gpio38", "gpio42", - "gpio43", "gpio46", "gpio55", - "gpio56", "gpio57", "gpio58"; - function = "gpio"; - bias-pull-down; - }; - - akro2 { - pins = "gpio15", "gpio35", "gpio38", - "gpio42", "gpio43", "gpio46", - "gpio55", "gpio56", "gpio57", - "gpio58"; - drive-strength = <2>; - }; - - akro4 { - pins = "gpio14", "gpio36"; - drive-strength = <4>; - }; - }; - - /* - * Stock firmware has the following settings, so let's do the same. - * I don't sure why these are required. - */ - akro_pins: akro_pinmux { - akro { - pins = "gpio17", "gpio26", "gpio47"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - reset { - pins = "gpio45"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - - gmac0_rgmii { - pins = "gpio25"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0020000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x0020000 0x0020000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x0040000 0x0040000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x0080000 0x0080000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x0100000 0x0010000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x0110000 0x0010000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x0120000 0x0080000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x01a0000 0x0080000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x0220000 0x0080000>; - read-only; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x02a0000 0x0010000>; - read-only; - }; - - factory: partition@2b0000 { - label = "PRODUCTDATA"; - reg = <0x02b0000 0x0030000>; - read-only; - }; - - partition@2e0000 { - label = "ART"; - reg = <0x02e0000 0x0040000>; - read-only; - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - - partition@320000 { - label = "TP"; - reg = <0x0320000 0x0040000>; - read-only; - }; - - partition@360000 { - label = "TINY"; - reg = <0x0360000 0x0500000>; - read-only; - }; - - partition@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x0860000 0x17a0000>; - }; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - ieee80211-freq-limit = <2400000 2483000>; - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x04 0x80080080 /* PAD0_MODE */ - 0x0c 0x06000000 /* PAD6_MODE */ - 0x10 0x002613a0 /* PWS_REG */ - 0x50 0xcc36cc36 /* LED_CTRL0 */ - 0x54 0xca36ca36 /* LED_CTRL1 */ - 0x58 0xc936c936 /* LED_CTRL2 */ - 0x5c 0x03ffff00 /* LED_CTRL3 */ - 0x7c 0x0000004e /* PORT0_STATUS */ - 0x94 0x0000004e /* PORT6_STATUS */ - 0xe0 0xc74164de /* SGMII_CTRL */ - 0xe4 0x0006a545 /* MAC_PWR_SEL */ - >; - }; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&factory { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_factory_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_PRODUCTDATA_c: macaddr@c { - reg = <0xc 0x6>; - }; - - macaddr_PRODUCTDATA_12: macaddr@12 { - reg = <0x12 0x6>; - }; -}; |